diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
-rw-r--r-- | Documentation/devicetree/bindings/spi/sh-msiof.txt | 2 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/spi/spi-mt65xx.txt | 16 |
2 files changed, 11 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index 8f77144..705075d 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -51,7 +51,7 @@ Optional properties, deprecated for soctype-specific bindings: - renesas,tx-fifo-size : Overrides the default tx fifo size given in words (default is 64) - renesas,rx-fifo-size : Overrides the default rx fifo size given in words - (default is 64, or 256 on R-Car Gen2) + (default is 64) Pinctrl properties might be needed, too. See Documentation/devicetree/bindings/pinctrl/renesas,*. diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index dcefc43..6160ffb 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -15,17 +15,18 @@ Required properties: - interrupts: Should contain spi interrupt - clocks: phandles to input clocks. - The first should be <&topckgen CLK_TOP_SPI_SEL>. - The second should be one of the following. + The first should be one of the following. It's PLL. - <&clk26m>: specify parent clock 26MHZ. - <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ. It's the default one. - <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ. - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ. - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ. + The second should be <&topckgen CLK_TOP_SPI_SEL>. It's clock mux. + The third is <&pericfg CLK_PERI_SPI0>. It's clock gate. -- clock-names: shall be "spi-clk" for the controller clock, and - "parent-clk" for the parent clock. +- clock-names: shall be "parent-clk" for the parent clock, "sel-clk" for the + muxes clock, and "spi-clk" for the clock gate. Optional properties: - mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi @@ -44,8 +45,11 @@ spi: spi@1100a000 { #size-cells = <0>; reg = <0 0x1100a000 0 0x1000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_SPI_SEL>, <&topckgen CLK_TOP_SYSPLL3_D2>; - clock-names = "spi-clk", "parent-clk"; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + mediatek,pad-select = <0>; status = "disabled"; }; |