diff options
Diffstat (limited to 'Documentation/devicetree')
17 files changed, 133 insertions, 110 deletions
diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt index 1ae98b87..e4b9dce 100644 --- a/Documentation/devicetree/bindings/arc/archs-pct.txt +++ b/Documentation/devicetree/bindings/arc/archs-pct.txt @@ -2,7 +2,7 @@ The ARC HS can be configured with a pipeline performance monitor for counting CPU and cache events like cache misses and hits. Like conventional PCT there -are 100+ hardware conditions dynamically mapped to upto 32 counters. +are 100+ hardware conditions dynamically mapped to up to 32 counters. It also supports overflow interrupts. Required properties: diff --git a/Documentation/devicetree/bindings/arc/pct.txt b/Documentation/devicetree/bindings/arc/pct.txt index 7b95884..4e874d9 100644 --- a/Documentation/devicetree/bindings/arc/pct.txt +++ b/Documentation/devicetree/bindings/arc/pct.txt @@ -2,7 +2,7 @@ The ARC700 can be configured with a pipeline performance monitor for counting CPU and cache events like cache misses and hits. Like conventional PCT there -are 100+ hardware conditions dynamically mapped to upto 32 counters +are 100+ hardware conditions dynamically mapped to up to 32 counters Note that: * The ARC 700 PCT does not support interrupts; although HW events may be diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index ccc62f1..3f0cbbb 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -192,7 +192,6 @@ nodes to be present and contain the properties described below. can be one of: "allwinner,sun6i-a31" "allwinner,sun8i-a23" - "arm,psci" "arm,realview-smp" "brcm,bcm-nsp-smp" "brcm,brahma-b15" diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 30df832..87adfb2 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -32,6 +32,10 @@ Optional properties: - target-supply : regulator for SATA target power - phys : reference to the SATA PHY node - phy-names : must be "sata-phy" +- ports-implemented : Mask that indicates which ports that the HBA supports + are available for software to use. Useful if PORTS_IMPL + is not programmed by the BIOS, which is true with + some embedded SOC's. Required properties when using sub-nodes: - #address-cells : number of cells to encode an address diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt index e0fc2c1..241fb05 100644 --- a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt +++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt @@ -3,7 +3,7 @@ Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB. Required Properties: -- compatible: has to be "qca,<soctype>-cpu-intc" and one of the following +- compatible: has to be "qca,<soctype>-pll" and one of the following fallbacks: - "qca,ar7100-pll" - "qca,ar7240-pll" @@ -21,8 +21,8 @@ Optional properties: Example: - memory-controller@18050000 { - compatible = "qca,ar9132-ppl", "qca,ar9130-pll"; + pll-controller@18050000 { + compatible = "qca,ar9132-pll", "qca,ar9130-pll"; reg = <0x18050000 0x20>; clock-names = "ref"; diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt index f0d71bc..0b4a85f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt @@ -6,8 +6,8 @@ RK3xxx SoCs. Required properties : - reg : Offset and length of the register set for the device - - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c" or - "rockchip,rk3288-i2c". + - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c", + "rockchip,rk3228-i2c" or "rockchip,rk3288-i2c". - interrupts : interrupt number - clocks : parent clock diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index 28a4781..0ae0649 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -45,13 +45,13 @@ Required properties: Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports - mac-address : See ethernet.txt file in the same directory -- phy_id : Specifies slave phy id +- phy_id : Specifies slave phy id (deprecated, use phy-handle) - phy-handle : See ethernet.txt file in the same directory Slave sub-nodes: - fixed-link : See fixed-link.txt file in the same directory - Either the property phy_id, or the sub-node - fixed-link can be specified + +Note: Exactly one of phy_id, phy-handle, or fixed-link must be specified. Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration. diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index 5ca7929..32eaaca 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -9,7 +9,8 @@ have dual GMAC each represented by a child node.. Required properties: - compatible: Should be "mediatek,mt7623-eth" - reg: Address and length of the register set for the device -- interrupts: Should contain the frame engines interrupt +- interrupts: Should contain the three frame engines interrupts in numeric + order. These are fe_int0, fe_int1 and fe_int2. - clocks: the clock used by the core - clock-names: the names of the clock listed in the clocks property. These are "ethif", "esw", "gp2", "gp1" @@ -42,7 +43,9 @@ eth: ethernet@1b100000 { <ðsys CLK_ETHSYS_GP2>, <ðsys CLK_ETHSYS_GP1>; clock-names = "ethif", "esw", "gp2", "gp1"; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW + GIC_SPI 199 IRQ_TYPE_LEVEL_LOW + GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; resets = <ðsys MT2701_ETHSYS_ETH_RST>; reset-names = "eth"; diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt index 50c4f9b..e3b4809 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt @@ -8,15 +8,19 @@ Required properties: of memory mapped region. - clock-names: from common clock binding: Required elements: "24m" -- rockchip,grf: phandle to the syscon managing the "general register files" - #phy-cells : from the generic PHY bindings, must be 0; Example: -edp_phy: edp-phy { - compatible = "rockchip,rk3288-dp-phy"; - rockchip,grf = <&grf>; - clocks = <&cru SCLK_EDP_24M>; - clock-names = "24m"; - #phy-cells = <0>; +grf: syscon@ff770000 { + compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; + +... + + edp_phy: edp-phy { + compatible = "rockchip,rk3288-dp-phy"; + clocks = <&cru SCLK_EDP_24M>; + clock-names = "24m"; + #phy-cells = <0>; + }; }; diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt index 61916f1..555cb0f 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt @@ -3,17 +3,23 @@ Rockchip EMMC PHY Required properties: - compatible: rockchip,rk3399-emmc-phy - - rockchip,grf : phandle to the syscon managing the "general - register files" - #phy-cells: must be 0 - - reg: PHY configure reg address offset in "general + - reg: PHY register address offset and length in "general register files" Example: -emmcphy: phy { - compatible = "rockchip,rk3399-emmc-phy"; - rockchip,grf = <&grf>; - reg = <0xf780>; - #phy-cells = <0>; + +grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + +... + + emmcphy: phy@f780 { + compatible = "rockchip,rk3399-emmc-phy"; + reg = <0xf780 0x20>; + #phy-cells = <0>; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt index 08a4a32..0326154 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt @@ -134,12 +134,12 @@ mfio80 ddr_debug, mips_trace_data, mips_debug mfio81 dreq0, mips_trace_data, eth_debug mfio82 dreq1, mips_trace_data, eth_debug mfio83 mips_pll_lock, mips_trace_data, usb_debug -mfio84 sys_pll_lock, mips_trace_data, usb_debug -mfio85 wifi_pll_lock, mips_trace_data, sdhost_debug -mfio86 bt_pll_lock, mips_trace_data, sdhost_debug -mfio87 rpu_v_pll_lock, dreq2, socif_debug -mfio88 rpu_l_pll_lock, dreq3, socif_debug -mfio89 audio_pll_lock, dreq4, dreq5 +mfio84 audio_pll_lock, mips_trace_data, usb_debug +mfio85 rpu_v_pll_lock, mips_trace_data, sdhost_debug +mfio86 rpu_l_pll_lock, mips_trace_data, sdhost_debug +mfio87 sys_pll_lock, dreq2, socif_debug +mfio88 wifi_pll_lock, dreq3, socif_debug +mfio89 bt_pll_lock, dreq4, dreq5 tck trstn tdi diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 3f6a524..32f4a2d 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -1,13 +1,16 @@ == Amlogic Meson pinmux controller == Required properties for the root node: - - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl" + - compatible: one of "amlogic,meson8-cbus-pinctrl" + "amlogic,meson8b-cbus-pinctrl" + "amlogic,meson8-aobus-pinctrl" + "amlogic,meson8b-aobus-pinctrl" - reg: address and size of registers controlling irq functionality === GPIO sub-nodes === -The 2 power domains of the controller (regular and always-on) are -represented as sub-nodes and each of them acts as a GPIO controller. +The GPIO bank for the controller is represented as a sub-node and it acts as a +GPIO controller. Required properties for sub-nodes are: - reg: should contain address and size for mux, pull-enable, pull and @@ -18,10 +21,6 @@ Required properties for sub-nodes are: - gpio-controller: identifies the node as a gpio controller - #gpio-cells: must be 2 -Valid sub-node names are: - - "banks" for the regular domain - - "ao-bank" for the always-on domain - === Other sub-nodes === Child nodes without the "gpio-controller" represent some desired @@ -45,7 +44,7 @@ pinctrl-bindings.txt === Example === pinctrl: pinctrl@c1109880 { - compatible = "amlogic,meson8-pinctrl"; + compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0xc1109880 0x10>; #address-cells = <1>; #size-cells = <1>; @@ -61,15 +60,6 @@ pinctrl-bindings.txt #gpio-cells = <2>; }; - gpio_ao: ao-bank@c1108030 { - reg = <0xc8100014 0x4>, - <0xc810002c 0x4>, - <0xc8100024 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - nand { mux { groups = "nand_io", "nand_io_ce0", "nand_io_ce1", @@ -79,18 +69,4 @@ pinctrl-bindings.txt function = "nand"; }; }; - - uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a", - "uart_cts_ao_a", "uart_rts_ao_a"; - function = "uart_ao"; - }; - - conf { - pins = "GPIOAO_0", "GPIOAO_1", - "GPIOAO_2", "GPIOAO_3"; - bias-disable; - }; - }; }; diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt index e98a9652..0127be3 100644 --- a/Documentation/devicetree/bindings/regmap/regmap.txt +++ b/Documentation/devicetree/bindings/regmap/regmap.txt @@ -1,50 +1,29 @@ -Device-Tree binding for regmap - -The endianness mode of CPU & Device scenarios: -Index Device Endianness properties ---------------------------------------------------- -1 BE 'big-endian' -2 LE 'little-endian' -3 Native 'native-endian' - -For one device driver, which will run in different scenarios above -on different SoCs using the devicetree, we need one way to simplify -this. +Devicetree binding for regmap Optional properties: -- {big,little,native}-endian: these are boolean properties, if absent - then the implementation will choose a default based on the device - being controlled. These properties are for register values and all - the buffers only. Native endian means that the CPU and device have - the same endianness. -Examples: -Scenario 1 : CPU in LE mode & device in LE mode. -dev: dev@40031000 { - compatible = "name"; - reg = <0x40031000 0x1000>; - ... -}; + little-endian, + big-endian, + native-endian: See common-properties.txt for a definition -Scenario 2 : CPU in LE mode & device in BE mode. -dev: dev@40031000 { - compatible = "name"; - reg = <0x40031000 0x1000>; - ... - big-endian; -}; +Note: +Regmap defaults to little-endian register access on MMIO based +devices, this is by far the most common setting. On CPU +architectures that typically run big-endian operating systems +(e.g. PowerPC), registers can be defined as big-endian and must +be marked that way in the devicetree. -Scenario 3 : CPU in BE mode & device in BE mode. -dev: dev@40031000 { - compatible = "name"; - reg = <0x40031000 0x1000>; - ... -}; +On SoCs that can be operated in both big-endian and little-endian +modes, with a single hardware switch controlling both the endianess +of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS +chips), "native-endian" is used to allow using the same device tree +blob in both cases. -Scenario 4 : CPU in BE mode & device in LE mode. +Examples: +Scenario 1 : a register set in big-endian mode. dev: dev@40031000 { - compatible = "name"; + compatible = "syscon"; reg = <0x40031000 0x1000>; + big-endian; ... - little-endian; }; diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt index 1068ffc..fdde63a 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt @@ -15,9 +15,10 @@ Required properties: is the rtc tick interrupt. The number of cells representing a interrupt depends on the parent interrupt controller. - clocks: Must contain a list of phandle and clock specifier for the rtc - and source clocks. -- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the - same order as the clocks property. + clock and in the case of a s3c6410 compatible controller, also + a source clock. +- clock-names: Must contain "rtc" and for a s3c6410 compatible controller, + a "rtc_src" sorted in the same order as the clocks property. Example: diff --git a/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt new file mode 100644 index 0000000..79de379f --- /dev/null +++ b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt @@ -0,0 +1,34 @@ +Microchip PIC32 SPI Master controller + +Required properties: +- compatible: Should be "microchip,pic32mzda-spi". +- reg: Address and length of register space for the device. +- interrupts: Should contain all three spi interrupts in sequence + of <fault-irq>, <receive-irq>, <transmit-irq>. +- interrupt-names: Should be "fault", "rx", "tx" in order. +- clocks: Phandle of the clock generating SPI clock on the bus. +- clock-names: Should be "mck0". +- cs-gpios: Specifies the gpio pins to be used for chipselects. + See: Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: +- dmas: Two or more DMA channel specifiers following the convention outlined + in Documentation/devicetree/bindings/dma/dma.txt +- dma-names: Names for the dma channels. There must be at least one channel + named "spi-tx" for transmit and named "spi-rx" for receive. + +Example: + +spi1: spi@1f821000 { + compatible = "microchip,pic32mzda-spi"; + reg = <0x1f821000 0x200>; + interrupts = <109 IRQ_TYPE_LEVEL_HIGH>, + <110 IRQ_TYPE_LEVEL_HIGH>, + <111 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "fault", "rx", "tx"; + clocks = <&PBCLK2>; + clock-names = "mck0"; + cs-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + dmas = <&dma 134>, <&dma 135>; + dma-names = "spi-rx", "spi-tx"; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index fa77f87..d2969d2 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -13,8 +13,7 @@ Required properties: Optional property: - big-endian: If present the dspi device's registers are implemented - in big endian mode, otherwise in native mode(same with CPU), for more - detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. + in big endian mode. Optional SPI slave node properties: - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip diff --git a/Documentation/devicetree/bindings/spi/sqi-pic32.txt b/Documentation/devicetree/bindings/spi/sqi-pic32.txt new file mode 100644 index 0000000..c82d021 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/sqi-pic32.txt @@ -0,0 +1,18 @@ +Microchip PIC32 Quad SPI controller +----------------------------------- +Required properties: +- compatible: Should be "microchip,pic32mzda-sqi". +- reg: Address and length of SQI controller register space. +- interrupts: Should contain SQI interrupt. +- clocks: Should contain phandle of two clocks in sequence, one that drives + clock on SPI bus and other that drives SQI controller. +- clock-names: Should be "spi_ck" and "reg_ck" in order. + +Example: + sqi1: spi@1f8e2000 { + compatible = "microchip,pic32mzda-sqi"; + reg = <0x1f8e2000 0x200>; + clocks = <&rootclk REF2CLK>, <&rootclk PB5CLK>; + clock-names = "spi_ck", "reg_ck"; + interrupts = <169 IRQ_TYPE_LEVEL_HIGH>; + }; |