summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/serial/arm,mps2-uart.txt19
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-imx-uart.txt4
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt16
-rw-r--r--Documentation/devicetree/bindings/serial/serial.txt57
-rw-r--r--Documentation/devicetree/bindings/serial/sirf-uart.txt8
5 files changed, 94 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
new file mode 100644
index 0000000..128cc6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
@@ -0,0 +1,19 @@
+ARM MPS2 UART
+
+Required properties:
+- compatible : Should be "arm,mps2-uart"
+- reg : Address and length of the register set
+- interrupts : Reference to the UART RX, TX and overrun interrupts
+
+Required clocking property:
+- clocks : The input clock of the UART
+
+
+Examples:
+
+uart0: serial@40004000 {
+ compatible = "arm,mps2-uart";
+ reg = <0x40004000 0x1000>;
+ interrupts = <0 1 12>;
+ clocks = <&sysclk>;
+};
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
index ed94c21..1e82802 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
@@ -6,7 +6,7 @@ Required properties:
- interrupts : Should contain uart interrupt
Optional properties:
-- fsl,uart-has-rtscts : Indicate the uart has rts and cts
+- uart-has-rtscts : Indicate the uart has rts and cts
- fsl,irda-mode : Indicate the uart supports irda mode
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
in DCE mode by default.
@@ -24,6 +24,6 @@ uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
fsl,dte-mode;
};
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
index 7c408c8..5c96d41 100644
--- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
@@ -1,8 +1,10 @@
* Freescale MXS Application UART (AUART)
-Required properties:
-- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
- imx23 and imx28.
+Required properties for all SoCs:
+- compatible : Should be one of fallowing variants:
+ "fsl,imx23-auart" - Freescale i.MX23
+ "fsl,imx28-auart" - Freescale i.MX28
+ "alphascale,asm9260-auart" - Alphascale ASM9260
- reg : Address and length of the register set for the device
- interrupts : Should contain the auart interrupt numbers
- dmas: DMA specifier, consisting of a phandle to DMA controller node
@@ -10,8 +12,14 @@ Required properties:
Refer to dma.txt and fsl-mxs-dma.txt for details.
- dma-names: "rx" for RX channel, "tx" for TX channel.
+Required properties for "alphascale,asm9260-auart":
+- clocks : the clocks feeding the watchdog timer. See clock-bindings.txt
+- clock-names : should be set to
+ "mod" - source for tick counter.
+ "ahb" - ahb gate.
+
Optional properties:
-- fsl,uart-has-rtscts : Indicate the UART has RTS and CTS lines
+- uart-has-rtscts : Indicate the UART has RTS and CTS lines
for hardware flow control,
it also means you enable the DMA support for this UART.
- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
diff --git a/Documentation/devicetree/bindings/serial/serial.txt b/Documentation/devicetree/bindings/serial/serial.txt
new file mode 100644
index 0000000..fd970f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/serial.txt
@@ -0,0 +1,57 @@
+Generic Serial DT Bindings
+
+This document lists a set of generic properties for describing UARTs in a
+device tree. Whether these properties apply to a particular device depends on
+the DT bindings for the actual device.
+
+Optional properties:
+ - cts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
+ used as the UART's CTS line.
+ - dcd-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
+ used as the UART's DCD line.
+ - dsr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
+ used as the UART's DSR line.
+ - dtr-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
+ used as the UART's DTR line.
+ - rng-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
+ used as the UART's RNG line.
+ - rts-gpios: Must contain a GPIO specifier, referring to the GPIO pin to be
+ used as the UART's RTS line.
+
+ - uart-has-rtscts: The presence of this property indicates that the
+ UART has dedicated lines for RTS/CTS hardware flow control, and that
+ they are available for use (wired and enabled by pinmux configuration).
+ This depends on both the UART hardware and the board wiring.
+ Note that this property is mutually-exclusive with "cts-gpios" and
+ "rts-gpios" above.
+
+
+Examples:
+
+ uart1: serial@48022000 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ ti,hwmods = "uart2";
+ clock-frequency = <48000000>;
+ reg = <0x48022000 0x2000>;
+ interrupts = <73>;
+ dmas = <&edma 28 0>, <&edma 29 0>;
+ dma-names = "tx", "rx";
+ dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+
+ scifa4: serial@e6c80000 {
+ compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+ reg = <0xe6c80000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
+ clock-names = "fck";
+ power-domains = <&pd_a3sp>;
+ uart-has-rtscts;
+ status = "okay";
+ };
diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt
index 67e2a0a..1e48bbb 100644
--- a/Documentation/devicetree/bindings/serial/sirf-uart.txt
+++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt
@@ -9,9 +9,9 @@ Required properties:
- clocks : Should contain uart clock number
Optional properties:
-- sirf,uart-has-rtscts: we have hardware flow controller pins in hardware
-- rts-gpios: RTS pin for USP-based UART if sirf,uart-has-rtscts is true
-- cts-gpios: CTS pin for USP-based UART if sirf,uart-has-rtscts is true
+- uart-has-rtscts: we have hardware flow controller pins in hardware
+- rts-gpios: RTS pin for USP-based UART if uart-has-rtscts is true
+- cts-gpios: CTS pin for USP-based UART if uart-has-rtscts is true
Example:
@@ -28,7 +28,7 @@ On the board-specific dts, we can put rts-gpios and cts-gpios like
usp@b0090000 {
compatible = "sirf,prima2-usp-uart";
- sirf,uart-has-rtscts;
+ uart-has-rtscts;
rts-gpios = <&gpio 15 0>;
cts-gpios = <&gpio 46 0>;
};