diff options
Diffstat (limited to 'Documentation/media/uapi/dvb/fe_property_parameters.rst')
-rw-r--r-- | Documentation/media/uapi/dvb/fe_property_parameters.rst | 1967 |
1 files changed, 1967 insertions, 0 deletions
diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst b/Documentation/media/uapi/dvb/fe_property_parameters.rst new file mode 100644 index 0000000..47eb293 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe_property_parameters.rst @@ -0,0 +1,1967 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _fe_property_parameters: + +****************************** +Digital TV property parameters +****************************** + + +.. _DTV-UNDEFINED: + +DTV_UNDEFINED +============= + +Used internally. A GET/SET operation for it won't change or return +anything. + + +.. _DTV-TUNE: + +DTV_TUNE +======== + +Interpret the cache of data, build either a traditional frontend +tunerequest so we can pass validation in the ``FE_SET_FRONTEND`` ioctl. + + +.. _DTV-CLEAR: + +DTV_CLEAR +========= + +Reset a cache of data specific to the frontend here. This does not +effect hardware. + + +.. _DTV-FREQUENCY: + +DTV_FREQUENCY +============= + +Central frequency of the channel. + +Notes: + +1)For satellite delivery systems, it is measured in kHz. For the other +ones, it is measured in Hz. + +2)For ISDB-T, the channels are usually transmitted with an offset of +143kHz. E.g. a valid frequency could be 474143 kHz. The stepping is +bound to the bandwidth of the channel which is 6MHz. + +3)As in ISDB-Tsb the channel consists of only one or three segments the +frequency step is 429kHz, 3*429 respectively. As for ISDB-T the central +frequency of the channel is expected. + + +.. _DTV-MODULATION: + +DTV_MODULATION +============== + +Specifies the frontend modulation type for delivery systems that +supports more than one modulation type. The modulation can be one of the +types defined by enum :ref:`fe_modulation <fe-modulation>`. + + +.. _fe-modulation-t: + +Modulation property +------------------- + +Most of the digital TV standards currently offers more than one possible +modulation (sometimes called as "constellation" on some standards). This +enum contains the values used by the Kernel. Please note that not all +modulations are supported by a given standard. + + +.. _fe-modulation: + +.. flat-table:: enum fe_modulation + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _QPSK: + + ``QPSK`` + + - QPSK modulation + + - .. row 3 + + - .. _QAM-16: + + ``QAM_16`` + + - 16-QAM modulation + + - .. row 4 + + - .. _QAM-32: + + ``QAM_32`` + + - 32-QAM modulation + + - .. row 5 + + - .. _QAM-64: + + ``QAM_64`` + + - 64-QAM modulation + + - .. row 6 + + - .. _QAM-128: + + ``QAM_128`` + + - 128-QAM modulation + + - .. row 7 + + - .. _QAM-256: + + ``QAM_256`` + + - 256-QAM modulation + + - .. row 8 + + - .. _QAM-AUTO: + + ``QAM_AUTO`` + + - Autodetect QAM modulation + + - .. row 9 + + - .. _VSB-8: + + ``VSB_8`` + + - 8-VSB modulation + + - .. row 10 + + - .. _VSB-16: + + ``VSB_16`` + + - 16-VSB modulation + + - .. row 11 + + - .. _PSK-8: + + ``PSK_8`` + + - 8-PSK modulation + + - .. row 12 + + - .. _APSK-16: + + ``APSK_16`` + + - 16-APSK modulation + + - .. row 13 + + - .. _APSK-32: + + ``APSK_32`` + + - 32-APSK modulation + + - .. row 14 + + - .. _DQPSK: + + ``DQPSK`` + + - DQPSK modulation + + - .. row 15 + + - .. _QAM-4-NR: + + ``QAM_4_NR`` + + - 4-QAM-NR modulation + + + +.. _DTV-BANDWIDTH-HZ: + +DTV_BANDWIDTH_HZ +================ + +Bandwidth for the channel, in HZ. + +Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``, +``8000000``, ``10000000``. + +Notes: + +1) For ISDB-T it should be always 6000000Hz (6MHz) + +2) For ISDB-Tsb it can vary depending on the number of connected +segments + +3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth for +DVB-C depends on the symbol rate + +4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from +other parameters (DTV_ISDBT_SB_SEGMENT_IDX, +DTV_ISDBT_SB_SEGMENT_COUNT). + +5) DVB-T supports 6, 7 and 8MHz. + +6) In addition, DVB-T2 supports 1.172, 5 and 10MHz. + + +.. _DTV-INVERSION: + +DTV_INVERSION +============= + +Specifies if the frontend should do spectral inversion or not. + + +.. _fe-spectral-inversion-t: + +enum fe_modulation: Frontend spectral inversion +----------------------------------------------- + +This parameter indicates if spectral inversion should be presumed or +not. In the automatic setting (``INVERSION_AUTO``) the hardware will try +to figure out the correct setting by itself. If the hardware doesn't +support, the DVB core will try to lock at the carrier first with +inversion off. If it fails, it will try to enable inversion. + + +.. _fe-spectral-inversion: + +.. flat-table:: enum fe_modulation + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _INVERSION-OFF: + + ``INVERSION_OFF`` + + - Don't do spectral band inversion. + + - .. row 3 + + - .. _INVERSION-ON: + + ``INVERSION_ON`` + + - Do spectral band inversion. + + - .. row 4 + + - .. _INVERSION-AUTO: + + ``INVERSION_AUTO`` + + - Autodetect spectral band inversion. + + + +.. _DTV-DISEQC-MASTER: + +DTV_DISEQC_MASTER +================= + +Currently not implemented. + + +.. _DTV-SYMBOL-RATE: + +DTV_SYMBOL_RATE +=============== + +Digital TV symbol rate, in bauds (symbols/second). Used on cable +standards. + + +.. _DTV-INNER-FEC: + +DTV_INNER_FEC +============= + +Used cable/satellite transmissions. The acceptable values are: + + +.. _fe-code-rate-t: + +enum fe_code_rate: type of the Forward Error Correction. +-------------------------------------------------------- + + +.. _fe-code-rate: + +.. flat-table:: enum fe_code_rate + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _FEC-NONE: + + ``FEC_NONE`` + + - No Forward Error Correction Code + + - .. row 3 + + - .. _FEC-AUTO: + + ``FEC_AUTO`` + + - Autodetect Error Correction Code + + - .. row 4 + + - .. _FEC-1-2: + + ``FEC_1_2`` + + - Forward Error Correction Code 1/2 + + - .. row 5 + + - .. _FEC-2-3: + + ``FEC_2_3`` + + - Forward Error Correction Code 2/3 + + - .. row 6 + + - .. _FEC-3-4: + + ``FEC_3_4`` + + - Forward Error Correction Code 3/4 + + - .. row 7 + + - .. _FEC-4-5: + + ``FEC_4_5`` + + - Forward Error Correction Code 4/5 + + - .. row 8 + + - .. _FEC-5-6: + + ``FEC_5_6`` + + - Forward Error Correction Code 5/6 + + - .. row 9 + + - .. _FEC-6-7: + + ``FEC_6_7`` + + - Forward Error Correction Code 6/7 + + - .. row 10 + + - .. _FEC-7-8: + + ``FEC_7_8`` + + - Forward Error Correction Code 7/8 + + - .. row 11 + + - .. _FEC-8-9: + + ``FEC_8_9`` + + - Forward Error Correction Code 8/9 + + - .. row 12 + + - .. _FEC-9-10: + + ``FEC_9_10`` + + - Forward Error Correction Code 9/10 + + - .. row 13 + + - .. _FEC-2-5: + + ``FEC_2_5`` + + - Forward Error Correction Code 2/5 + + - .. row 14 + + - .. _FEC-3-5: + + ``FEC_3_5`` + + - Forward Error Correction Code 3/5 + + + +.. _DTV-VOLTAGE: + +DTV_VOLTAGE +=========== + +The voltage is usually used with non-DiSEqC capable LNBs to switch the +polarzation (horizontal/vertical). When using DiSEqC epuipment this +voltage has to be switched consistently to the DiSEqC commands as +described in the DiSEqC spec. + + +.. _fe-sec-voltage: + +.. flat-table:: enum fe_sec_voltage + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _SEC-VOLTAGE-13: + + ``SEC_VOLTAGE_13`` + + - Set DC voltage level to 13V + + - .. row 3 + + - .. _SEC-VOLTAGE-18: + + ``SEC_VOLTAGE_18`` + + - Set DC voltage level to 18V + + - .. row 4 + + - .. _SEC-VOLTAGE-OFF: + + ``SEC_VOLTAGE_OFF`` + + - Don't send any voltage to the antenna + + + +.. _DTV-TONE: + +DTV_TONE +======== + +Currently not used. + + +.. _DTV-PILOT: + +DTV_PILOT +========= + +Sets DVB-S2 pilot + + +.. _fe-pilot-t: + +fe_pilot type +------------- + + +.. _fe-pilot: + +.. flat-table:: enum fe_pilot + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _PILOT-ON: + + ``PILOT_ON`` + + - Pilot tones enabled + + - .. row 3 + + - .. _PILOT-OFF: + + ``PILOT_OFF`` + + - Pilot tones disabled + + - .. row 4 + + - .. _PILOT-AUTO: + + ``PILOT_AUTO`` + + - Autodetect pilot tones + + + +.. _DTV-ROLLOFF: + +DTV_ROLLOFF +=========== + +Sets DVB-S2 rolloff + + +.. _fe-rolloff-t: + +fe_rolloff type +--------------- + + +.. _fe-rolloff: + +.. flat-table:: enum fe_rolloff + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ROLLOFF-35: + + ``ROLLOFF_35`` + + - Roloff factor: α=35% + + - .. row 3 + + - .. _ROLLOFF-20: + + ``ROLLOFF_20`` + + - Roloff factor: α=20% + + - .. row 4 + + - .. _ROLLOFF-25: + + ``ROLLOFF_25`` + + - Roloff factor: α=25% + + - .. row 5 + + - .. _ROLLOFF-AUTO: + + ``ROLLOFF_AUTO`` + + - Auto-detect the roloff factor. + + + +.. _DTV-DISEQC-SLAVE-REPLY: + +DTV_DISEQC_SLAVE_REPLY +====================== + +Currently not implemented. + + +.. _DTV-FE-CAPABILITY-COUNT: + +DTV_FE_CAPABILITY_COUNT +======================= + +Currently not implemented. + + +.. _DTV-FE-CAPABILITY: + +DTV_FE_CAPABILITY +================= + +Currently not implemented. + + +.. _DTV-DELIVERY-SYSTEM: + +DTV_DELIVERY_SYSTEM +=================== + +Specifies the type of Delivery system + + +.. _fe-delivery-system-t: + +fe_delivery_system type +----------------------- + +Possible values: + + +.. _fe-delivery-system: + +.. flat-table:: enum fe_delivery_system + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _SYS-UNDEFINED: + + ``SYS_UNDEFINED`` + + - Undefined standard. Generally, indicates an error + + - .. row 3 + + - .. _SYS-DVBC-ANNEX-A: + + ``SYS_DVBC_ANNEX_A`` + + - Cable TV: DVB-C following ITU-T J.83 Annex A spec + + - .. row 4 + + - .. _SYS-DVBC-ANNEX-B: + + ``SYS_DVBC_ANNEX_B`` + + - Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM) + + - .. row 5 + + - .. _SYS-DVBC-ANNEX-C: + + ``SYS_DVBC_ANNEX_C`` + + - Cable TV: DVB-C following ITU-T J.83 Annex C spec + + - .. row 6 + + - .. _SYS-ISDBC: + + ``SYS_ISDBC`` + + - Cable TV: ISDB-C (no drivers yet) + + - .. row 7 + + - .. _SYS-DVBT: + + ``SYS_DVBT`` + + - Terrestral TV: DVB-T + + - .. row 8 + + - .. _SYS-DVBT2: + + ``SYS_DVBT2`` + + - Terrestral TV: DVB-T2 + + - .. row 9 + + - .. _SYS-ISDBT: + + ``SYS_ISDBT`` + + - Terrestral TV: ISDB-T + + - .. row 10 + + - .. _SYS-ATSC: + + ``SYS_ATSC`` + + - Terrestral TV: ATSC + + - .. row 11 + + - .. _SYS-ATSCMH: + + ``SYS_ATSCMH`` + + - Terrestral TV (mobile): ATSC-M/H + + - .. row 12 + + - .. _SYS-DTMB: + + ``SYS_DTMB`` + + - Terrestrial TV: DTMB + + - .. row 13 + + - .. _SYS-DVBS: + + ``SYS_DVBS`` + + - Satellite TV: DVB-S + + - .. row 14 + + - .. _SYS-DVBS2: + + ``SYS_DVBS2`` + + - Satellite TV: DVB-S2 + + - .. row 15 + + - .. _SYS-TURBO: + + ``SYS_TURBO`` + + - Satellite TV: DVB-S Turbo + + - .. row 16 + + - .. _SYS-ISDBS: + + ``SYS_ISDBS`` + + - Satellite TV: ISDB-S + + - .. row 17 + + - .. _SYS-DAB: + + ``SYS_DAB`` + + - Digital audio: DAB (not fully supported) + + - .. row 18 + + - .. _SYS-DSS: + + ``SYS_DSS`` + + - Satellite TV:"DSS (not fully supported) + + - .. row 19 + + - .. _SYS-CMMB: + + ``SYS_CMMB`` + + - Terrestral TV (mobile):CMMB (not fully supported) + + - .. row 20 + + - .. _SYS-DVBH: + + ``SYS_DVBH`` + + - Terrestral TV (mobile): DVB-H (standard deprecated) + + + +.. _DTV-ISDBT-PARTIAL-RECEPTION: + +DTV_ISDBT_PARTIAL_RECEPTION +=========================== + +If ``DTV_ISDBT_SOUND_BROADCASTING`` is '0' this bit-field represents +whether the channel is in partial reception mode or not. + +If '1' ``DTV_ISDBT_LAYERA_*`` values are assigned to the center segment +and ``DTV_ISDBT_LAYERA_SEGMENT_COUNT`` has to be '1'. + +If in addition ``DTV_ISDBT_SOUND_BROADCASTING`` is '1' +``DTV_ISDBT_PARTIAL_RECEPTION`` represents whether this ISDB-Tsb channel +is consisting of one segment and layer or three segments and two layers. + +Possible values: 0, 1, -1 (AUTO) + + +.. _DTV-ISDBT-SOUND-BROADCASTING: + +DTV_ISDBT_SOUND_BROADCASTING +============================ + +This field represents whether the other DTV_ISDBT_*-parameters are +referring to an ISDB-T and an ISDB-Tsb channel. (See also +``DTV_ISDBT_PARTIAL_RECEPTION``). + +Possible values: 0, 1, -1 (AUTO) + + +.. _DTV-ISDBT-SB-SUBCHANNEL-ID: + +DTV_ISDBT_SB_SUBCHANNEL_ID +========================== + +This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. + +(Note of the author: This might not be the correct description of the +``SUBCHANNEL-ID`` in all details, but it is my understanding of the +technical background needed to program a device) + +An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a +set of connected ISDB-Tsb channels. In this set of channels every +channel can be received independently. The number of connected ISDB-Tsb +segment can vary, e.g. depending on the frequency spectrum bandwidth +available. + +Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The +broadcaster has several possibilities to put those channels in the air: +Assuming a normal 13-segment ISDB-T spectrum he can align the 8 segments +from position 1-8 to 5-13 or anything in between. + +The underlying layer of segments are subchannels: each segment is +consisting of several subchannels with a predefined IDs. A sub-channel +is used to help the demodulator to synchronize on the channel. + +An ISDB-T channel is always centered over all sub-channels. As for the +example above, in ISDB-Tsb it is no longer as simple as that. + +``The DTV_ISDBT_SB_SUBCHANNEL_ID`` parameter is used to give the +sub-channel ID of the segment to be demodulated. + +Possible values: 0 .. 41, -1 (AUTO) + + +.. _DTV-ISDBT-SB-SEGMENT-IDX: + +DTV_ISDBT_SB_SEGMENT_IDX +======================== + +This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. + +``DTV_ISDBT_SB_SEGMENT_IDX`` gives the index of the segment to be +demodulated for an ISDB-Tsb channel where several of them are +transmitted in the connected manner. + +Possible values: 0 .. ``DTV_ISDBT_SB_SEGMENT_COUNT`` - 1 + +Note: This value cannot be determined by an automatic channel search. + + +.. _DTV-ISDBT-SB-SEGMENT-COUNT: + +DTV_ISDBT_SB_SEGMENT_COUNT +========================== + +This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. + +``DTV_ISDBT_SB_SEGMENT_COUNT`` gives the total count of connected +ISDB-Tsb channels. + +Possible values: 1 .. 13 + +Note: This value cannot be determined by an automatic channel search. + + +.. _isdb-hierq-layers: + +DTV-ISDBT-LAYER[A-C] parameters +=============================== + +ISDB-T channels can be coded hierarchically. As opposed to DVB-T in +ISDB-T hierarchical layers can be decoded simultaneously. For that +reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders. + +ISDB-T has 3 hierarchical layers which each can use a part of the +available segments. The total number of segments over all layers has to +13 in ISDB-T. + +There are 3 parameter sets, for Layers A, B and C. + + +.. _DTV-ISDBT-LAYER-ENABLED: + +DTV_ISDBT_LAYER_ENABLED +----------------------- + +Hierarchical reception in ISDB-T is achieved by enabling or disabling +layers in the decoding process. Setting all bits of +``DTV_ISDBT_LAYER_ENABLED`` to '1' forces all layers (if applicable) to +be demodulated. This is the default. + +If the channel is in the partial reception mode +(``DTV_ISDBT_PARTIAL_RECEPTION`` = 1) the central segment can be decoded +independently of the other 12 segments. In that mode layer A has to have +a ``SEGMENT_COUNT`` of 1. + +In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according +to ``DTV_ISDBT_PARTIAL_RECEPTION``. ``SEGMENT_COUNT`` must be filled +accordingly. + +Only the values of the first 3 bits are used. Other bits will be silently ignored: + +``DTV_ISDBT_LAYER_ENABLED`` bit 0: layer A enabled + +``DTV_ISDBT_LAYER_ENABLED`` bit 1: layer B enabled + +``DTV_ISDBT_LAYER_ENABLED`` bit 2: layer C enabled + +``DTV_ISDBT_LAYER_ENABLED`` bits 3-31: unused + + +.. _DTV-ISDBT-LAYER-FEC: + +DTV_ISDBT_LAYER[A-C]_FEC +------------------------ + +Possible values: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``, +``FEC_5_6``, ``FEC_7_8`` + + +.. _DTV-ISDBT-LAYER-MODULATION: + +DTV_ISDBT_LAYER[A-C]_MODULATION +------------------------------- + +Possible values: ``QAM_AUTO``, QP\ ``SK, QAM_16``, ``QAM_64``, ``DQPSK`` + +Note: If layer C is ``DQPSK`` layer B has to be ``DQPSK``. If layer B is +``DQPSK`` and ``DTV_ISDBT_PARTIAL_RECEPTION``\ =0 layer has to be +``DQPSK``. + + +.. _DTV-ISDBT-LAYER-SEGMENT-COUNT: + +DTV_ISDBT_LAYER[A-C]_SEGMENT_COUNT +---------------------------------- + +Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO) + +Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and +``DTV_ISDBT_PARTIAL_RECEPTION`` and ``LAYER[A-C]_SEGMENT_COUNT`` + + +.. _isdbt-layer_seg-cnt-table: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - PR + + - SB + + - Layer A width + + - Layer B width + + - Layer C width + + - total width + + - .. row 2 + + - 0 + + - 0 + + - 1 .. 13 + + - 1 .. 13 + + - 1 .. 13 + + - 13 + + - .. row 3 + + - 1 + + - 0 + + - 1 + + - 1 .. 13 + + - 1 .. 13 + + - 13 + + - .. row 4 + + - 0 + + - 1 + + - 1 + + - 0 + + - 0 + + - 1 + + - .. row 5 + + - 1 + + - 1 + + - 1 + + - 2 + + - 0 + + - 13 + + + +.. _DTV-ISDBT-LAYER-TIME-INTERLEAVING: + +DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING +-------------------------------------- + +Valid values: 0, 1, 2, 4, -1 (AUTO) + +when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid. + +Note: The real time interleaving length depends on the mode (fft-size). +The values here are referring to what can be found in the +TMCC-structure, as shown in the table below. + + +.. _isdbt-layer-interleaving-table: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING`` + + - Mode 1 (2K FFT) + + - Mode 2 (4K FFT) + + - Mode 3 (8K FFT) + + - .. row 2 + + - 0 + + - 0 + + - 0 + + - 0 + + - .. row 3 + + - 1 + + - 4 + + - 2 + + - 1 + + - .. row 4 + + - 2 + + - 8 + + - 4 + + - 2 + + - .. row 5 + + - 4 + + - 16 + + - 8 + + - 4 + + + +.. _DTV-ATSCMH-FIC-VER: + +DTV_ATSCMH_FIC_VER +------------------ + +Version number of the FIC (Fast Information Channel) signaling data. + +FIC is used for relaying information to allow rapid service acquisition +by the receiver. + +Possible values: 0, 1, 2, 3, ..., 30, 31 + + +.. _DTV-ATSCMH-PARADE-ID: + +DTV_ATSCMH_PARADE_ID +-------------------- + +Parade identification number + +A parade is a collection of up to eight MH groups, conveying one or two +ensembles. + +Possible values: 0, 1, 2, 3, ..., 126, 127 + + +.. _DTV-ATSCMH-NOG: + +DTV_ATSCMH_NOG +-------------- + +Number of MH groups per MH subframe for a designated parade. + +Possible values: 1, 2, 3, 4, 5, 6, 7, 8 + + +.. _DTV-ATSCMH-TNOG: + +DTV_ATSCMH_TNOG +--------------- + +Total number of MH groups including all MH groups belonging to all MH +parades in one MH subframe. + +Possible values: 0, 1, 2, 3, ..., 30, 31 + + +.. _DTV-ATSCMH-SGN: + +DTV_ATSCMH_SGN +-------------- + +Start group number. + +Possible values: 0, 1, 2, 3, ..., 14, 15 + + +.. _DTV-ATSCMH-PRC: + +DTV_ATSCMH_PRC +-------------- + +Parade repetition cycle. + +Possible values: 1, 2, 3, 4, 5, 6, 7, 8 + + +.. _DTV-ATSCMH-RS-FRAME-MODE: + +DTV_ATSCMH_RS_FRAME_MODE +------------------------ + +Reed Solomon (RS) frame mode. + +Possible values are: + + +.. _atscmh-rs-frame-mode: + +.. flat-table:: enum atscmh_rs_frame_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ATSCMH-RSFRAME-PRI-ONLY: + + ``ATSCMH_RSFRAME_PRI_ONLY`` + + - Single Frame: There is only a primary RS Frame for all Group + Regions. + + - .. row 3 + + - .. _ATSCMH-RSFRAME-PRI-SEC: + + ``ATSCMH_RSFRAME_PRI_SEC`` + + - Dual Frame: There are two separate RS Frames: Primary RS Frame for + Group Region A and B and Secondary RS Frame for Group Region C and + D. + + + +.. _DTV-ATSCMH-RS-FRAME-ENSEMBLE: + +DTV_ATSCMH_RS_FRAME_ENSEMBLE +---------------------------- + +Reed Solomon(RS) frame ensemble. + +Possible values are: + + +.. _atscmh-rs-frame-ensemble: + +.. flat-table:: enum atscmh_rs_frame_ensemble + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ATSCMH-RSFRAME-ENS-PRI: + + ``ATSCMH_RSFRAME_ENS_PRI`` + + - Primary Ensemble. + + - .. row 3 + + - .. _ATSCMH-RSFRAME-ENS-SEC: + + ``AATSCMH_RSFRAME_PRI_SEC`` + + - Secondary Ensemble. + + - .. row 4 + + - .. _ATSCMH-RSFRAME-RES: + + ``AATSCMH_RSFRAME_RES`` + + - Reserved. Shouldn't be used. + + + +.. _DTV-ATSCMH-RS-CODE-MODE-PRI: + +DTV_ATSCMH_RS_CODE_MODE_PRI +--------------------------- + +Reed Solomon (RS) code mode (primary). + +Possible values are: + + +.. _atscmh-rs-code-mode: + +.. flat-table:: enum atscmh_rs_code_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ATSCMH-RSCODE-211-187: + + ``ATSCMH_RSCODE_211_187`` + + - Reed Solomon code (211,187). + + - .. row 3 + + - .. _ATSCMH-RSCODE-223-187: + + ``ATSCMH_RSCODE_223_187`` + + - Reed Solomon code (223,187). + + - .. row 4 + + - .. _ATSCMH-RSCODE-235-187: + + ``ATSCMH_RSCODE_235_187`` + + - Reed Solomon code (235,187). + + - .. row 5 + + - .. _ATSCMH-RSCODE-RES: + + ``ATSCMH_RSCODE_RES`` + + - Reserved. Shouldn't be used. + + + +.. _DTV-ATSCMH-RS-CODE-MODE-SEC: + +DTV_ATSCMH_RS_CODE_MODE_SEC +--------------------------- + +Reed Solomon (RS) code mode (secondary). + +Possible values are the same as documented on enum +:ref:`atscmh_rs_code_mode <atscmh-rs-code-mode>`: + + +.. _DTV-ATSCMH-SCCC-BLOCK-MODE: + +DTV_ATSCMH_SCCC_BLOCK_MODE +-------------------------- + +Series Concatenated Convolutional Code Block Mode. + +Possible values are: + + +.. _atscmh-sccc-block-mode: + +.. flat-table:: enum atscmh_scc_block_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ATSCMH-SCCC-BLK-SEP: + + ``ATSCMH_SCCC_BLK_SEP`` + + - Separate SCCC: the SCCC outer code mode shall be set independently + for each Group Region (A, B, C, D) + + - .. row 3 + + - .. _ATSCMH-SCCC-BLK-COMB: + + ``ATSCMH_SCCC_BLK_COMB`` + + - Combined SCCC: all four Regions shall have the same SCCC outer + code mode. + + - .. row 4 + + - .. _ATSCMH-SCCC-BLK-RES: + + ``ATSCMH_SCCC_BLK_RES`` + + - Reserved. Shouldn't be used. + + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-A: + +DTV_ATSCMH_SCCC_CODE_MODE_A +--------------------------- + +Series Concatenated Convolutional Code Rate. + +Possible values are: + + +.. _atscmh-sccc-code-mode: + +.. flat-table:: enum atscmh_sccc_code_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ATSCMH-SCCC-CODE-HLF: + + ``ATSCMH_SCCC_CODE_HLF`` + + - The outer code rate of a SCCC Block is 1/2 rate. + + - .. row 3 + + - .. _ATSCMH-SCCC-CODE-QTR: + + ``ATSCMH_SCCC_CODE_QTR`` + + - The outer code rate of a SCCC Block is 1/4 rate. + + - .. row 4 + + - .. _ATSCMH-SCCC-CODE-RES: + + ``ATSCMH_SCCC_CODE_RES`` + + - to be documented. + + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-B: + +DTV_ATSCMH_SCCC_CODE_MODE_B +--------------------------- + +Series Concatenated Convolutional Code Rate. + +Possible values are the same as documented on enum +:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`. + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-C: + +DTV_ATSCMH_SCCC_CODE_MODE_C +--------------------------- + +Series Concatenated Convolutional Code Rate. + +Possible values are the same as documented on enum +:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`. + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-D: + +DTV_ATSCMH_SCCC_CODE_MODE_D +--------------------------- + +Series Concatenated Convolutional Code Rate. + +Possible values are the same as documented on enum +:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`. + + +.. _DTV-API-VERSION: + +DTV_API_VERSION +=============== + +Returns the major/minor version of the DVB API + + +.. _DTV-CODE-RATE-HP: + +DTV_CODE_RATE_HP +================ + +Used on terrestrial transmissions. The acceptable values are the ones +described at :ref:`fe_transmit_mode_t <fe-transmit-mode-t>`. + + +.. _DTV-CODE-RATE-LP: + +DTV_CODE_RATE_LP +================ + +Used on terrestrial transmissions. The acceptable values are the ones +described at :ref:`fe_transmit_mode_t <fe-transmit-mode-t>`. + + +.. _DTV-GUARD-INTERVAL: + +DTV_GUARD_INTERVAL +================== + +Possible values are: + + +.. _fe-guard-interval-t: + +Modulation guard interval +------------------------- + + +.. _fe-guard-interval: + +.. flat-table:: enum fe_guard_interval + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _GUARD-INTERVAL-AUTO: + + ``GUARD_INTERVAL_AUTO`` + + - Autodetect the guard interval + + - .. row 3 + + - .. _GUARD-INTERVAL-1-128: + + ``GUARD_INTERVAL_1_128`` + + - Guard interval 1/128 + + - .. row 4 + + - .. _GUARD-INTERVAL-1-32: + + ``GUARD_INTERVAL_1_32`` + + - Guard interval 1/32 + + - .. row 5 + + - .. _GUARD-INTERVAL-1-16: + + ``GUARD_INTERVAL_1_16`` + + - Guard interval 1/16 + + - .. row 6 + + - .. _GUARD-INTERVAL-1-8: + + ``GUARD_INTERVAL_1_8`` + + - Guard interval 1/8 + + - .. row 7 + + - .. _GUARD-INTERVAL-1-4: + + ``GUARD_INTERVAL_1_4`` + + - Guard interval 1/4 + + - .. row 8 + + - .. _GUARD-INTERVAL-19-128: + + ``GUARD_INTERVAL_19_128`` + + - Guard interval 19/128 + + - .. row 9 + + - .. _GUARD-INTERVAL-19-256: + + ``GUARD_INTERVAL_19_256`` + + - Guard interval 19/256 + + - .. row 10 + + - .. _GUARD-INTERVAL-PN420: + + ``GUARD_INTERVAL_PN420`` + + - PN length 420 (1/4) + + - .. row 11 + + - .. _GUARD-INTERVAL-PN595: + + ``GUARD_INTERVAL_PN595`` + + - PN length 595 (1/6) + + - .. row 12 + + - .. _GUARD-INTERVAL-PN945: + + ``GUARD_INTERVAL_PN945`` + + - PN length 945 (1/9) + + +Notes: + +1) If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the +hardware will try to find the correct guard interval (if capable) and +will use TMCC to fill in the missing parameters. + +2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at +present + +3) DTMB specifies PN420, PN595 and PN945. + + +.. _DTV-TRANSMISSION-MODE: + +DTV_TRANSMISSION_MODE +===================== + +Specifies the number of carriers used by the standard. This is used only +on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB + + +.. _fe-transmit-mode-t: + +enum fe_transmit_mode: Number of carriers per channel +----------------------------------------------------- + + +.. _fe-transmit-mode: + +.. flat-table:: enum fe_transmit_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _TRANSMISSION-MODE-AUTO: + + ``TRANSMISSION_MODE_AUTO`` + + - Autodetect transmission mode. The hardware will try to find the + correct FFT-size (if capable) to fill in the missing parameters. + + - .. row 3 + + - .. _TRANSMISSION-MODE-1K: + + ``TRANSMISSION_MODE_1K`` + + - Transmission mode 1K + + - .. row 4 + + - .. _TRANSMISSION-MODE-2K: + + ``TRANSMISSION_MODE_2K`` + + - Transmission mode 2K + + - .. row 5 + + - .. _TRANSMISSION-MODE-8K: + + ``TRANSMISSION_MODE_8K`` + + - Transmission mode 8K + + - .. row 6 + + - .. _TRANSMISSION-MODE-4K: + + ``TRANSMISSION_MODE_4K`` + + - Transmission mode 4K + + - .. row 7 + + - .. _TRANSMISSION-MODE-16K: + + ``TRANSMISSION_MODE_16K`` + + - Transmission mode 16K + + - .. row 8 + + - .. _TRANSMISSION-MODE-32K: + + ``TRANSMISSION_MODE_32K`` + + - Transmission mode 32K + + - .. row 9 + + - .. _TRANSMISSION-MODE-C1: + + ``TRANSMISSION_MODE_C1`` + + - Single Carrier (C=1) transmission mode (DTMB) + + - .. row 10 + + - .. _TRANSMISSION-MODE-C3780: + + ``TRANSMISSION_MODE_C3780`` + + - Multi Carrier (C=3780) transmission mode (DTMB) + + +Notes: + +1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called +'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K + +2) If ``DTV_TRANSMISSION_MODE`` is set the ``TRANSMISSION_MODE_AUTO`` +the hardware will try to find the correct FFT-size (if capable) and will +use TMCC to fill in the missing parameters. + +3) DVB-T specifies 2K and 8K as valid sizes. + +4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K. + +5) DTMB specifies C1 and C3780. + + +.. _DTV-HIERARCHY: + +DTV_HIERARCHY +============= + +Frontend hierarchy + + +.. _fe-hierarchy-t: + +Frontend hierarchy +------------------ + + +.. _fe-hierarchy: + +.. flat-table:: enum fe_hierarchy + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _HIERARCHY-NONE: + + ``HIERARCHY_NONE`` + + - No hierarchy + + - .. row 3 + + - .. _HIERARCHY-AUTO: + + ``HIERARCHY_AUTO`` + + - Autodetect hierarchy (if supported) + + - .. row 4 + + - .. _HIERARCHY-1: + + ``HIERARCHY_1`` + + - Hierarchy 1 + + - .. row 5 + + - .. _HIERARCHY-2: + + ``HIERARCHY_2`` + + - Hierarchy 2 + + - .. row 6 + + - .. _HIERARCHY-4: + + ``HIERARCHY_4`` + + - Hierarchy 4 + + + +.. _DTV-STREAM-ID: + +DTV_STREAM_ID +============= + +DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on +a single transport stream. This property enables the DVB driver to +handle substream filtering, when supported by the hardware. By default, +substream filtering is disabled. + +For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255. + +For ISDB, the valid substream id range is from 1 to 65535. + +To disable it, you should use the special macro NO_STREAM_ID_FILTER. + +Note: any value outside the id range also disables filtering. + + +.. _DTV-DVBT2-PLP-ID-LEGACY: + +DTV_DVBT2_PLP_ID_LEGACY +======================= + +Obsolete, replaced with DTV_STREAM_ID. + + +.. _DTV-ENUM-DELSYS: + +DTV_ENUM_DELSYS +=============== + +A Multi standard frontend needs to advertise the delivery systems +provided. Applications need to enumerate the provided delivery systems, +before using any other operation with the frontend. Prior to it's +introduction, FE_GET_INFO was used to determine a frontend type. A +frontend which provides more than a single delivery system, +FE_GET_INFO doesn't help much. Applications which intends to use a +multistandard frontend must enumerate the delivery systems associated +with it, rather than trying to use FE_GET_INFO. In the case of a +legacy frontend, the result is just the same as with FE_GET_INFO, but +in a more structured format + + +.. _DTV-INTERLEAVING: + +DTV_INTERLEAVING +================ + +Time interleaving to be used. Currently, used only on DTMB. + + +.. _fe-interleaving: + +.. flat-table:: enum fe_interleaving + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _INTERLEAVING-NONE: + + ``INTERLEAVING_NONE`` + + - No interleaving. + + - .. row 3 + + - .. _INTERLEAVING-AUTO: + + ``INTERLEAVING_AUTO`` + + - Auto-detect interleaving. + + - .. row 4 + + - .. _INTERLEAVING-240: + + ``INTERLEAVING_240`` + + - Interleaving of 240 symbols. + + - .. row 5 + + - .. _INTERLEAVING-720: + + ``INTERLEAVING_720`` + + - Interleaving of 720 symbols. + + + +.. _DTV-LNA: + +DTV_LNA +======= + +Low-noise amplifier. + +Hardware might offer controllable LNA which can be set manually using +that parameter. Usually LNA could be found only from terrestrial devices +if at all. + +Possible values: 0, 1, LNA_AUTO + +0, LNA off + +1, LNA on + +use the special macro LNA_AUTO to set LNA auto |