diff options
Diffstat (limited to 'Documentation')
27 files changed, 456 insertions, 173 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus new file mode 100644 index 0000000..636e938 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-bus-vmbus @@ -0,0 +1,29 @@ +What: /sys/bus/vmbus/devices/vmbus_*/id +Date: Jul 2009 +KernelVersion: 2.6.31 +Contact: K. Y. Srinivasan <kys@microsoft.com> +Description: The VMBus child_relid of the device's primary channel +Users: tools/hv/lsvmbus + +What: /sys/bus/vmbus/devices/vmbus_*/class_id +Date: Jul 2009 +KernelVersion: 2.6.31 +Contact: K. Y. Srinivasan <kys@microsoft.com> +Description: The VMBus interface type GUID of the device +Users: tools/hv/lsvmbus + +What: /sys/bus/vmbus/devices/vmbus_*/device_id +Date: Jul 2009 +KernelVersion: 2.6.31 +Contact: K. Y. Srinivasan <kys@microsoft.com> +Description: The VMBus interface instance GUID of the device +Users: tools/hv/lsvmbus + +What: /sys/bus/vmbus/devices/vmbus_*/channel_vp_mapping +Date: Jul 2015 +KernelVersion: 4.2.0 +Contact: K. Y. Srinivasan <kys@microsoft.com> +Description: The mapping of which primary/sub channels are bound to which + Virtual Processors. + Format: <channel's child_relid:the bound cpu's number> +Users: tools/hv/lsvmbus diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x index b4d0b99..d72ca17 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x @@ -112,7 +112,7 @@ KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (RW) Mask to apply to all the context ID comparator. -What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_val +What: /sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_pid Date: November 2014 KernelVersion: 3.19 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x index 2fe2e3d..2355ed8 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x @@ -249,7 +249,7 @@ KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (RW) Select which context ID comparator to work with. -What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_val +What: /sys/bus/coresight/devices/<memory_map>.etm/ctxid_pid Date: April 2015 KernelVersion: 4.01 Contact: Mathieu Poirier <mathieu.poirier@linaro.org> diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid deleted file mode 100644 index ffb9536..0000000 --- a/Documentation/ABI/testing/sysfs-driver-sunxi-sid +++ /dev/null @@ -1,22 +0,0 @@ -What: /sys/devices/*/<our-device>/eeprom -Date: August 2013 -Contact: Oliver Schinagl <oliver@schinagl.nl> -Description: read-only access to the SID (Security-ID) on current - A-series SoC's from Allwinner. Currently supports A10, A10s, A13 - and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes, - whereas the newer A20 SoC exposes 512 bytes split into sections. - Besides the 16 bytes of SID, there's also an SJTAG area, - HDMI-HDCP key and some custom keys. Below a quick overview, for - details see the user manual: - 0x000 128 bit root-key (sun[457]i) - 0x010 128 bit boot-key (sun7i) - 0x020 64 bit security-jtag-key (sun7i) - 0x028 16 bit key configuration (sun7i) - 0x02b 16 bit custom-vendor-key (sun7i) - 0x02c 320 bit low general key (sun7i) - 0x040 32 bit read-control access (sun7i) - 0x064 224 bit low general key (sun7i) - 0x080 2304 bit HDCP-key (sun7i) - 0x1a0 768 bit high general key (sun7i) -Users: any user space application which wants to read the SID on - Allwinner's A-series of CPU's. diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 65a6db2..62938eb 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -17,6 +17,7 @@ its hardware characteristcs. - "arm,coresight-tmc", "arm,primecell"; - "arm,coresight-funnel", "arm,primecell"; - "arm,coresight-etm3x", "arm,primecell"; + - "arm,coresight-etm4x", "arm,primecell"; - "qcom,coresight-replicator1x", "arm,primecell"; * reg: physical base address and length of the register diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index d6b794c..91e6e5c 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -199,6 +199,7 @@ nodes to be present and contain the properties described below. "qcom,kpss-acc-v1" "qcom,kpss-acc-v2" "rockchip,rk3066-smp" + "ste,dbx500-smp" - cpu-release-addr Usage: required for systems that have an "enable-method" diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt index d305876..c53e0b0 100644 --- a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt +++ b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt @@ -35,7 +35,7 @@ Example: device_type = "dma"; reg = <0x0 0x1f270000 0x0 0x10000>, <0x0 0x1f200000 0x0 0x10000>, - <0x0 0x1b008000 0x0 0x2000>, + <0x0 0x1b000000 0x0 0x400000>, <0x0 0x1054a000 0x0 0x100>; interrupts = <0x0 0x82 0x4>, <0x0 0xb8 0x4>, diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt index 45414bb..f61d5af 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt @@ -10,8 +10,11 @@ Required Properties: Optional Properties: - ti,wakeup : To enable the wakeup comparator in probe - - ti,enable-id-detection: Perform ID detection. + - ti,enable-id-detection: Perform ID detection. If id-gpio is specified + it performs id-detection using GPIO else using OTG core. - ti,enable-vbus-detection: Perform VBUS detection. + - id-gpio: gpio for GPIO ID detection. See gpio binding. + - debounce-delay-ms: debounce delay for GPIO ID pin in milliseconds. palmas-usb { compatible = "ti,twl6035-usb", "ti,palmas-usb"; diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index fabdf64..d543ed3 100644 --- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -4,6 +4,10 @@ Required properties: - compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" - reg: Should contain registers location and length += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + Example for sun4i: sid@01c23800 { compatible = "allwinner,sun4i-a10-sid"; diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt new file mode 100644 index 0000000..b52bc11 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -0,0 +1,80 @@ += NVMEM(Non Volatile Memory) Data Device Tree Bindings = + +This binding is intended to represent the location of hardware +configuration data stored in NVMEMs like eeprom, efuses and so on. + +On a significant proportion of boards, the manufacturer has stored +some data on NVMEM, for the OS to be able to retrieve these information +and act upon it. Obviously, the OS has to know about where to retrieve +these data from, and where they are stored on the storage device. + +This document is here to document this. + += Data providers = +Contains bindings specific to provider drivers and data cells as children +of this node. + +Optional properties: + read-only: Mark the provider as read only. + += Data cells = +These are the child nodes of the provider which contain data cell +information like offset and size in nvmem provider. + +Required properties: +reg: specifies the offset in byte within the storage device. + +Optional properties: + +bits: Is pair of bit location and number of bits, which specifies offset + in bit and number of bits within the address range specified by reg property. + Offset takes values from 0-7. + +For example: + + /* Provider */ + qfprom: qfprom@00700000 { + ... + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_calibration_bckp: calib_bckp@504 { + reg = <0x504 0x11>; + bits = <6 128> + }; + + pvs_version: pvs-version@6 { + reg = <0x6 0x2> + bits = <7 2> + }; + + speed_bin: speed-bin@c{ + reg = <0xc 0x1>; + bits = <2 3>; + + }; + ... + }; + += Data consumers = +Are device nodes which consume nvmem data cells/providers. + +Required-properties: +nvmem-cells: list of phandle to the nvmem data cells. +nvmem-cell-names: names for the each nvmem-cells specified. Required if + nvmem-cells is used. + +Optional-properties: +nvmem : list of phandles to nvmem providers. +nvmem-names: names for the each nvmem provider. required if nvmem is used. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt new file mode 100644 index 0000000..4ad68b7 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt @@ -0,0 +1,35 @@ += Qualcomm QFPROM device tree bindings = + +This binding is intended to represent QFPROM which is found in most QCOM SOCs. + +Required properties: +- compatible: should be "qcom,qfprom" +- reg: Should contain registers location and length + += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + qfprom: qfprom@00700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x8000>; + ... + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x4404 0x10>; + }; + }; + + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 305e3df..9cf9446 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -82,6 +82,9 @@ Optional properties: - id: If there are multiple instance of the same type, in order to differentiate between each instance "id" can be used (e.g., multi-lane PCIe PHY). If "id" is not provided, it is set to default value of '1'. + - syscon-pllreset: Handle to system control region that contains the + CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0 + register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy. This is usually a subnode of ocp2scp to which it is connected. @@ -100,3 +103,16 @@ usb3phy@4a084400 { "sysclk", "refclk"; }; + +sata_phy: phy@4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; + #phy-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt new file mode 100644 index 0000000..0e6d875 --- /dev/null +++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt @@ -0,0 +1,48 @@ +Qualcomm Coincell Charger: + +The hardware block controls charging for a coincell or capacitor that is +used to provide power backup for certain features of the power management +IC (PMIC) + +- compatible: + Usage: required + Value type: <string> + Definition: must be: "qcom,pm8941-coincell" + +- reg: + Usage: required + Value type: <u32> + Definition: base address of the coincell charger registers + +- qcom,rset-ohms: + Usage: required + Value type: <u32> + Definition: resistance (in ohms) for current-limiting resistor + must be one of: 800, 1200, 1700, 2100 + +- qcom,vset-millivolts: + Usage: required + Value type: <u32> + Definition: voltage (in millivolts) to apply for charging + must be one of: 2500, 3000, 3100, 3200 + +- qcom,charger-disable: + Usage: optional + Value type: <boolean> + Definition: definining this property disables charging + +This charger is a sub-node of one of the 8941 PMIC blocks, and is specified +as a child node in DTS of that node. See ../mfd/qcom,spmi-pmic.txt and +../mfd/qcom-pm8xxx.txt + +Example: + + pm8941@0 { + coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/mt8173-max98090.txt b/Documentation/devicetree/bindings/sound/mt8173-max98090.txt index 829bd26..519e97c 100644 --- a/Documentation/devicetree/bindings/sound/mt8173-max98090.txt +++ b/Documentation/devicetree/bindings/sound/mt8173-max98090.txt @@ -3,11 +3,13 @@ MT8173 with MAX98090 CODEC Required properties: - compatible : "mediatek,mt8173-max98090" - mediatek,audio-codec: the phandle of the MAX98090 audio codec +- mediatek,platform: the phandle of MT8173 ASoC platform Example: sound { compatible = "mediatek,mt8173-max98090"; mediatek,audio-codec = <&max98090>; + mediatek,platform = <&afe>; }; diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt index 61e98c9..f205ce9 100644 --- a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt +++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt @@ -3,11 +3,13 @@ MT8173 with RT5650 RT5676 CODECS Required properties: - compatible : "mediatek,mt8173-rt5650-rt5676" - mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs +- mediatek,platform: the phandle of MT8173 ASoC platform Example: sound { compatible = "mediatek,mt8173-rt5650-rt5676"; mediatek,audio-codec = <&rt5650 &rt5676>; + mediatek,platform = <&afe>; }; diff --git a/Documentation/devicetree/bindings/spi/spi-ath79.txt b/Documentation/devicetree/bindings/spi/spi-ath79.txt index f1ad9c3..9c696fa 100644 --- a/Documentation/devicetree/bindings/spi/spi-ath79.txt +++ b/Documentation/devicetree/bindings/spi/spi-ath79.txt @@ -3,7 +3,7 @@ Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller Required properties: - compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback. - reg: Base address and size of the controllers memory area -- clocks: phandle to the AHB clock. +- clocks: phandle of the AHB clock. - clock-names: has to be "ahb". - #address-cells: <1>, as required by generic SPI binding. - #size-cells: <0>, also as required by generic SPI binding. @@ -12,9 +12,9 @@ Child nodes as per the generic SPI binding. Example: - spi@1F000000 { + spi@1f000000 { compatible = "qca,ar9132-spi", "qca,ar7100-spi"; - reg = <0x1F000000 0x10>; + reg = <0x1f000000 0x10>; clocks = <&pll 2>; clock-names = "ahb"; diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904 index 014f112..57fffe3 100644 --- a/Documentation/hwmon/nct7904 +++ b/Documentation/hwmon/nct7904 @@ -35,11 +35,11 @@ temp1_input Local temperature (1/1000 degree, temp[2-9]_input CPU temperatures (1/1000 degree, 0.125 degree resolution) -fan[1-4]_mode R/W, 0/1 for manual or SmartFan mode +pwm[1-4]_enable R/W, 1/2 for manual or SmartFan mode Setting SmartFan mode is supported only if it has been previously configured by BIOS (or configuration EEPROM) -fan[1-4]_pwm R/O in SmartFan mode, R/W in manual control mode +pwm[1-4] R/O in SmartFan mode, R/W in manual control mode The driver checks sensor control registers and does not export the sensors that are not enabled. Anyway, a sensor that is enabled may actually be not diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index c86f2f1..1fec113 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -119,8 +119,10 @@ ALPS Absolute Mode - Protocol Version 2 byte 5: 0 z6 z5 z4 z3 z2 z1 z0 Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for -the DualPoint Stick. For non interleaved dualpoint devices the pointingstick -buttons get reported separately in the PSM, PSR and PSL bits. +the DualPoint Stick. The M, R and L bits signal the combined status of both +the pointingstick and touchpad buttons, except for Dell dualpoint devices +where the pointingstick buttons get reported separately in the PSM, PSR +and PSL bits. Dualpoint device -- interleaved packet format --------------------------------------------- diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 611c522..141f847 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -124,6 +124,8 @@ Code Seq#(hex) Include File Comments 'H' 00-7F linux/hiddev.h conflict! 'H' 00-0F linux/hidraw.h conflict! 'H' 01 linux/mei.h conflict! +'H' 02 linux/mei.h conflict! +'H' 03 linux/mei.h conflict! 'H' 00-0F sound/asound.h conflict! 'H' 20-40 sound/asound_fm.h conflict! 'H' 80-8F sound/sfnt_info.h conflict! diff --git a/Documentation/misc-devices/mei/mei.txt b/Documentation/misc-devices/mei/mei.txt index 8d47501..91c1fa3 100644 --- a/Documentation/misc-devices/mei/mei.txt +++ b/Documentation/misc-devices/mei/mei.txt @@ -96,7 +96,7 @@ A code snippet for an application communicating with Intel AMTHI client: IOCTL ===== -The Intel MEI Driver supports the following IOCTL command: +The Intel MEI Driver supports the following IOCTL commands: IOCTL_MEI_CONNECT_CLIENT Connect to firmware Feature (client). usage: @@ -125,6 +125,49 @@ The Intel MEI Driver supports the following IOCTL command: data that can be sent or received. (e.g. if MTU=2K, can send requests up to bytes 2k and received responses up to 2k bytes). + IOCTL_MEI_NOTIFY_SET: enable or disable event notifications + + Usage: + uint32_t enable; + ioctl(fd, IOCTL_MEI_NOTIFY_SET, &enable); + + Inputs: + uint32_t enable = 1; + or + uint32_t enable[disable] = 0; + + Error returns: + EINVAL Wrong IOCTL Number + ENODEV Device is not initialized or the client not connected + ENOMEM Unable to allocate memory to client internal data. + EFAULT Fatal Error (e.g. Unable to access user input data) + EOPNOTSUPP if the device doesn't support the feature + + Notes: + The client must be connected in order to enable notification events + + + IOCTL_MEI_NOTIFY_GET : retrieve event + + Usage: + uint32_t event; + ioctl(fd, IOCTL_MEI_NOTIFY_GET, &event); + + Outputs: + 1 - if an event is pending + 0 - if there is no even pending + + Error returns: + EINVAL Wrong IOCTL Number + ENODEV Device is not initialized or the client not connected + ENOMEM Unable to allocate memory to client internal data. + EFAULT Fatal Error (e.g. Unable to access user input data) + EOPNOTSUPP if the device doesn't support the feature + + Notes: + The client must be connected and event notification has to be enabled + in order to receive an event + Intel ME Applications ===================== diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt new file mode 100644 index 0000000..dbd40d8 --- /dev/null +++ b/Documentation/nvmem/nvmem.txt @@ -0,0 +1,152 @@ + NVMEM SUBSYSTEM + Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +This document explains the NVMEM Framework along with the APIs provided, +and how to use it. + +1. Introduction +=============== +*NVMEM* is the abbreviation for Non Volatile Memory layer. It is used to +retrieve configuration of SOC or Device specific data from non volatile +memories like eeprom, efuses and so on. + +Before this framework existed, NVMEM drivers like eeprom were stored in +drivers/misc, where they all had to duplicate pretty much the same code to +register a sysfs file, allow in-kernel users to access the content of the +devices they were driving, etc. + +This was also a problem as far as other in-kernel users were involved, since +the solutions used were pretty much different from one driver to another, there +was a rather big abstraction leak. + +This framework aims at solve these problems. It also introduces DT +representation for consumer devices to go get the data they require (MAC +Addresses, SoC/Revision ID, part numbers, and so on) from the NVMEMs. This +framework is based on regmap, so that most of the abstraction available in +regmap can be reused, across multiple types of buses. + +NVMEM Providers ++++++++++++++++ + +NVMEM provider refers to an entity that implements methods to initialize, read +and write the non-volatile memory. + +2. Registering/Unregistering the NVMEM provider +=============================================== + +A NVMEM provider can register with NVMEM core by supplying relevant +nvmem configuration to nvmem_register(), on success core would return a valid +nvmem_device pointer. + +nvmem_unregister(nvmem) is used to unregister a previously registered provider. + +For example, a simple qfprom case: + +static struct nvmem_config econfig = { + .name = "qfprom", + .owner = THIS_MODULE, +}; + +static int qfprom_probe(struct platform_device *pdev) +{ + ... + econfig.dev = &pdev->dev; + nvmem = nvmem_register(&econfig); + ... +} + +It is mandatory that the NVMEM provider has a regmap associated with its +struct device. Failure to do would return error code from nvmem_register(). + +NVMEM Consumers ++++++++++++++++ + +NVMEM consumers are the entities which make use of the NVMEM provider to +read from and to NVMEM. + +3. NVMEM cell based consumer APIs +================================= + +NVMEM cells are the data entries/fields in the NVMEM. +The NVMEM framework provides 3 APIs to read/write NVMEM cells. + +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name); +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name); + +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); + +void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len); +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len); + +*nvmem_cell_get() apis will get a reference to nvmem cell for a given id, +and nvmem_cell_read/write() can then read or write to the cell. +Once the usage of the cell is finished the consumer should call *nvmem_cell_put() +to free all the allocation memory for the cell. + +4. Direct NVMEM device based consumer APIs +========================================== + +In some instances it is necessary to directly read/write the NVMEM. +To facilitate such consumers NVMEM framework provides below apis. + +struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); +struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name); +void nvmem_device_put(struct nvmem_device *nvmem); +int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + +Before the consumers can read/write NVMEM directly, it should get hold +of nvmem_controller from one of the *nvmem_device_get() api. + +The difference between these apis and cell based apis is that these apis always +take nvmem_device as parameter. + +5. Releasing a reference to the NVMEM +===================================== + +When a consumers no longer needs the NVMEM, it has to release the reference +to the NVMEM it has obtained using the APIs mentioned in the above section. +The NVMEM framework provides 2 APIs to release a reference to the NVMEM. + +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); +void nvmem_device_put(struct nvmem_device *nvmem); +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem); + +Both these APIs are used to release a reference to the NVMEM and +devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated +with this NVMEM. + +Userspace ++++++++++ + +6. Userspace binary interface +============================== + +Userspace can read/write the raw NVMEM file located at +/sys/bus/nvmem/devices/*/nvmem + +ex: + +hexdump /sys/bus/nvmem/devices/qfprom0/nvmem + +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +* +00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00 +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +... +* +0001000 + +7. DeviceTree Binding +===================== + +See Documentation/devicetree/bindings/nvmem/nvmem.txt diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.txt index 2850df3..2fc9095 100644 --- a/Documentation/power/suspend-and-cpuhotplug.txt +++ b/Documentation/power/suspend-and-cpuhotplug.txt @@ -72,7 +72,7 @@ More details follow: | v Disable regular cpu hotplug - by setting cpu_hotplug_disabled=1 + by increasing cpu_hotplug_disabled | v Release cpu_add_remove_lock @@ -89,7 +89,7 @@ Resuming back is likewise, with the counterparts being (in the order of execution during resume): * enable_nonboot_cpus() which involves: | Acquire cpu_add_remove_lock - | Reset cpu_hotplug_disabled to 0, thereby enabling regular cpu hotplug + | Decrease cpu_hotplug_disabled, thereby enabling regular cpu hotplug | Call _cpu_up() [for all those cpus in the frozen_cpus mask, in a loop] | Release cpu_add_remove_lock v @@ -120,7 +120,7 @@ after the entire cycle is complete (i.e., suspend + resume). Acquire cpu_add_remove_lock | v - If cpu_hotplug_disabled is 1 + If cpu_hotplug_disabled > 0 return gracefully | | diff --git a/Documentation/s390/00-INDEX b/Documentation/s390/00-INDEX index 10c874e..9189535 100644 --- a/Documentation/s390/00-INDEX +++ b/Documentation/s390/00-INDEX @@ -16,8 +16,6 @@ Debugging390.txt - hints for debugging on s390 systems. driver-model.txt - information on s390 devices and the driver model. -kvm.txt - - ioctl calls to /dev/kvm on s390. monreader.txt - information on accessing the z/VM monitor stream from Linux. qeth.txt diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt deleted file mode 100644 index 85f3280..0000000 --- a/Documentation/s390/kvm.txt +++ /dev/null @@ -1,125 +0,0 @@ -*** BIG FAT WARNING *** -The kvm module is currently in EXPERIMENTAL state for s390. This means that -the interface to the module is not yet considered to remain stable. Thus, be -prepared that we keep breaking your userspace application and guest -compatibility over and over again until we feel happy with the result. Make sure -your guest kernel, your host kernel, and your userspace launcher are in a -consistent state. - -This Documentation describes the unique ioctl calls to /dev/kvm, the resulting -kvm-vm file descriptors, and the kvm-vcpu file descriptors that differ from x86. - -1. ioctl calls to /dev/kvm -KVM does support the following ioctls on s390 that are common with other -architectures and do behave the same: -KVM_GET_API_VERSION -KVM_CREATE_VM (*) see note -KVM_CHECK_EXTENSION -KVM_GET_VCPU_MMAP_SIZE - -Notes: -* KVM_CREATE_VM may fail on s390, if the calling process has multiple -threads and has not called KVM_S390_ENABLE_SIE before. - -In addition, on s390 the following architecture specific ioctls are supported: -ioctl: KVM_S390_ENABLE_SIE -args: none -see also: include/linux/kvm.h -This call causes the kernel to switch on PGSTE in the user page table. This -operation is needed in order to run a virtual machine, and it requires the -calling process to be single-threaded. Note that the first call to KVM_CREATE_VM -will implicitly try to switch on PGSTE if the user process has not called -KVM_S390_ENABLE_SIE before. User processes that want to launch multiple threads -before creating a virtual machine have to call KVM_S390_ENABLE_SIE, or will -observe an error calling KVM_CREATE_VM. Switching on PGSTE is a one-time -operation, is not reversible, and will persist over the entire lifetime of -the calling process. It does not have any user-visible effect other than a small -performance penalty. - -2. ioctl calls to the kvm-vm file descriptor -KVM does support the following ioctls on s390 that are common with other -architectures and do behave the same: -KVM_CREATE_VCPU -KVM_SET_USER_MEMORY_REGION (*) see note -KVM_GET_DIRTY_LOG (**) see note - -Notes: -* kvm does only allow exactly one memory slot on s390, which has to start - at guest absolute address zero and at a user address that is aligned on any - page boundary. This hardware "limitation" allows us to have a few unique - optimizations. The memory slot doesn't have to be filled - with memory actually, it may contain sparse holes. That said, with different - user memory layout this does still allow a large flexibility when - doing the guest memory setup. -** KVM_GET_DIRTY_LOG doesn't work properly yet. The user will receive an empty -log. This ioctl call is only needed for guest migration, and we intend to -implement this one in the future. - -In addition, on s390 the following architecture specific ioctls for the kvm-vm -file descriptor are supported: -ioctl: KVM_S390_INTERRUPT -args: struct kvm_s390_interrupt * -see also: include/linux/kvm.h -This ioctl is used to submit a floating interrupt for a virtual machine. -Floating interrupts may be delivered to any virtual cpu in the configuration. -Only some interrupt types defined in include/linux/kvm.h make sense when -submitted as floating interrupts. The following interrupts are not considered -to be useful as floating interrupts, and a call to inject them will result in --EINVAL error code: program interrupts and interprocessor signals. Valid -floating interrupts are: -KVM_S390_INT_VIRTIO -KVM_S390_INT_SERVICE - -3. ioctl calls to the kvm-vcpu file descriptor -KVM does support the following ioctls on s390 that are common with other -architectures and do behave the same: -KVM_RUN -KVM_GET_REGS -KVM_SET_REGS -KVM_GET_SREGS -KVM_SET_SREGS -KVM_GET_FPU -KVM_SET_FPU - -In addition, on s390 the following architecture specific ioctls for the -kvm-vcpu file descriptor are supported: -ioctl: KVM_S390_INTERRUPT -args: struct kvm_s390_interrupt * -see also: include/linux/kvm.h -This ioctl is used to submit an interrupt for a specific virtual cpu. -Only some interrupt types defined in include/linux/kvm.h make sense when -submitted for a specific cpu. The following interrupts are not considered -to be useful, and a call to inject them will result in -EINVAL error code: -service processor calls and virtio interrupts. Valid interrupt types are: -KVM_S390_PROGRAM_INT -KVM_S390_SIGP_STOP -KVM_S390_RESTART -KVM_S390_SIGP_SET_PREFIX -KVM_S390_INT_EMERGENCY - -ioctl: KVM_S390_STORE_STATUS -args: unsigned long -see also: include/linux/kvm.h -This ioctl stores the state of the cpu at the guest real address given as -argument, unless one of the following values defined in include/linux/kvm.h -is given as argument: -KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in -absolute lowcore as defined by the principles of operation -KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in -its prefix page just like the dump tool that comes with zipl. This is useful -to create a system dump for use with lkcdutils or crash. - -ioctl: KVM_S390_SET_INITIAL_PSW -args: struct kvm_s390_psw * -see also: include/linux/kvm.h -This ioctl can be used to set the processor status word (psw) of a stopped cpu -prior to running it with KVM_RUN. Note that this call is not required to modify -the psw during sie intercepts that fall back to userspace because struct kvm_run -does contain the psw, and this value is evaluated during reentry of KVM_RUN -after the intercept exit was recognized. - -ioctl: KVM_S390_INITIAL_RESET -args: none -see also: include/linux/kvm.h -This ioctl can be used to perform an initial cpu reset as defined by the -principles of operation. The target cpu has to be in stopped state. diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index 949de19..cda56df 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -199,7 +199,8 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "#include <linux/string.h>\n" buf += "#include <linux/configfs.h>\n" buf += "#include <linux/ctype.h>\n" - buf += "#include <asm/unaligned.h>\n\n" + buf += "#include <asm/unaligned.h>\n" + buf += "#include <scsi/scsi_proto.h>\n\n" buf += "#include <target/target_core_base.h>\n" buf += "#include <target/target_core_fabric.h>\n" buf += "#include <target/target_core_fabric_configfs.h>\n" @@ -230,8 +231,14 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " }\n" buf += " tpg->" + fabric_mod_port + " = " + fabric_mod_port + ";\n" buf += " tpg->" + fabric_mod_port + "_tpgt = tpgt;\n\n" - buf += " ret = core_tpg_register(&" + fabric_mod_name + "_ops, wwn,\n" - buf += " &tpg->se_tpg, SCSI_PROTOCOL_SAS);\n" + + if proto_ident == "FC": + buf += " ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_FCP);\n" + elif proto_ident == "SAS": + buf += " ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_SAS);\n" + elif proto_ident == "iSCSI": + buf += " ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_ISCSI);\n" + buf += " if (ret < 0) {\n" buf += " kfree(tpg);\n" buf += " return NULL;\n" @@ -292,7 +299,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n" buf += " .module = THIS_MODULE,\n" - buf += " .name = " + fabric_mod_name + ",\n" + buf += " .name = \"" + fabric_mod_name + "\",\n" buf += " .get_fabric_name = " + fabric_mod_name + "_get_fabric_name,\n" buf += " .tpg_get_wwn = " + fabric_mod_name + "_get_fabric_wwn,\n" buf += " .tpg_get_tag = " + fabric_mod_name + "_get_tag,\n" @@ -322,17 +329,17 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " .fabric_make_tpg = " + fabric_mod_name + "_make_tpg,\n" buf += " .fabric_drop_tpg = " + fabric_mod_name + "_drop_tpg,\n" buf += "\n" - buf += " .tfc_wwn_attrs = " + fabric_mod_name + "_wwn_attrs;\n" + buf += " .tfc_wwn_attrs = " + fabric_mod_name + "_wwn_attrs,\n" buf += "};\n\n" buf += "static int __init " + fabric_mod_name + "_init(void)\n" buf += "{\n" - buf += " return target_register_template(" + fabric_mod_name + "_ops);\n" + buf += " return target_register_template(&" + fabric_mod_name + "_ops);\n" buf += "};\n\n" buf += "static void __exit " + fabric_mod_name + "_exit(void)\n" buf += "{\n" - buf += " target_unregister_template(" + fabric_mod_name + "_ops);\n" + buf += " target_unregister_template(&" + fabric_mod_name + "_ops);\n" buf += "};\n\n" buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n" diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt index 77d14d5..0a5c329 100644 --- a/Documentation/trace/coresight.txt +++ b/Documentation/trace/coresight.txt @@ -15,7 +15,7 @@ HW assisted tracing is becoming increasingly useful when dealing with systems that have many SoCs and other components like GPU and DMA engines. ARM has developed a HW assisted tracing solution by means of different components, each being added to a design at synthesis time to cater to specific tracing needs. -Compoments are generally categorised as source, link and sinks and are +Components are generally categorised as source, link and sinks and are (usually) discovered using the AMBA bus. "Sources" generate a compressed stream representing the processor instruction @@ -138,7 +138,7 @@ void coresight_unregister(struct coresight_device *csdev); The registering function is taking a "struct coresight_device *csdev" and register the device with the core framework. The unregister function takes -a reference to a "strut coresight_device", obtained at registration time. +a reference to a "struct coresight_device", obtained at registration time. If everything goes well during the registration process the new devices will show up under /sys/bus/coresight/devices, as showns here for a TC2 platform: diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index a7926a9..a4ebcb7 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -3277,6 +3277,7 @@ should put the acknowledged interrupt vector into the 'epr' field. struct { #define KVM_SYSTEM_EVENT_SHUTDOWN 1 #define KVM_SYSTEM_EVENT_RESET 2 +#define KVM_SYSTEM_EVENT_CRASH 3 __u32 type; __u64 flags; } system_event; @@ -3296,6 +3297,10 @@ Valid values for 'type' are: KVM_SYSTEM_EVENT_RESET -- the guest has requested a reset of the VM. As with SHUTDOWN, userspace can choose to ignore the request, or to schedule the reset to occur in the future and may call KVM_RUN again. + KVM_SYSTEM_EVENT_CRASH -- the guest crash occurred and the guest + has requested a crash condition maintenance. Userspace can choose + to ignore the request, or to gather VM memory core dump and/or + reset/shutdown of the VM. /* Fix the size of the union. */ char padding[256]; |