diff options
Diffstat (limited to 'Documentation')
18 files changed, 140 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 23c0978..7fd64ec 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -52,6 +52,7 @@ System Timer (ST) required properties: - reg: Should contain registers location and length - interrupts: Should contain interrupt for the ST which is the IRQ line shared across all System Controller members. +- clocks: phandle to input clock. Its subnodes can be: - watchdog: compatible should be "atmel,at91rm9200-wdt" @@ -63,7 +64,7 @@ TC/TCLIB Timer required properties: Note that you can specify several interrupt cells if the TC block has one interrupt per channel. - clock-names: tuple listing input clock names. - Required elements: "t0_clk" + Required elements: "t0_clk", "slow_clk" Optional elements: "t1_clk", "t2_clk" - clocks: phandles to input clocks. @@ -91,12 +92,14 @@ RSTC Reset Controller required properties: - compatible: Should be "atmel,<chip>-rstc". <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" - reg: Should contain registers location and length +- clocks: phandle to input clock. Example: rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; }; RAMC SDRAM/DDR Controller required properties: @@ -119,6 +122,7 @@ required properties: - compatible: Should be "atmel,<chip>-shdwc". <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". - reg: Should contain registers location and length +- clocks: phandle to input clock. optional properties: - atmel,wakeup-mode: String, operation mode of the wakeup mode. @@ -137,9 +141,10 @@ optional at91sam9x5 properties: Example: - rstc@fffffd00 { - compatible = "atmel,at91sam9260-rstc"; - reg = <0xfffffd00 0x10>; + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; }; Special Function Registers (SFR) diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt new file mode 100644 index 0000000..6824b31 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt @@ -0,0 +1,14 @@ +Raspberry Pi VideoCore firmware driver + +Required properties: + +- compatible: Should be "raspberrypi,bcm2835-firmware" +- mboxes: Phandle to the firmware device's Mailbox. + (See: ../mailbox/mailbox.txt for more information) + +Example: + +firmware { + compatible = "raspberrypi,bcm2835-firmware"; + mboxes = <&mailbox>; +}; diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt index 4f40ff3..5171ad8 100644 --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt @@ -20,6 +20,8 @@ And in addition, the compatible shall be extended with the specific board. Currently known boards are: "buffalo,lschlv2" +"buffalo,lswvl" +"buffalo,lswxl" "buffalo,lsxhl" "buffalo,lsxl" "dlink,dns-320" diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index dd7550a..2daa424 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -5,6 +5,7 @@ Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property: Required root node property: compatible: Must contain one of + "mediatek,mt6580" "mediatek,mt6589" "mediatek,mt6592" "mediatek,mt8127" @@ -14,6 +15,9 @@ compatible: Must contain one of Supported boards: +- Evaluation board for MT6580: + Required root node properties: + - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580"; - bq Aquaris5 smart phone: Required root node properties: - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt index 4f5a535..3c9c3a7 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt @@ -11,6 +11,7 @@ Required properties: "mediatek,mt6592-sysirq" "mediatek,mt6589-sysirq" "mediatek,mt6582-sysirq" + "mediatek,mt6580-sysirq" "mediatek,mt6577-sysirq" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Use the same format as specified by GIC in diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 4f6a82c..9f4e513 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -135,6 +135,9 @@ Boards: - AM335X OrionLXm : Substation Automation Platform compatible = "novatech,am335x-lxm", "ti,am33xx" +- AM335X phyBOARD-WEGA: Single Board Computer dev kit + compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx" + - OMAP5 EVM : Evaluation Module compatible = "ti,omap5-evm", "ti,omap5" diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 60d4a1e..af58cd7 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -26,3 +26,38 @@ Rockchip platforms device tree bindings - ChipSPARK PopMetal-RK3288 board: Required root node properties: - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; + +- Netxeon R89 board: + Required root node properties: + - compatible = "netxeon,r89", "rockchip,rk3288"; + +- Google Jerry (Hisense Chromebook C11 and more): + Required root node properties: + - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", + "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", + "google,veyron-jerry-rev3", "google,veyron-jerry", + "google,veyron", "rockchip,rk3288"; + +- Google Minnie (Asus Chromebook Flip C100P): + Required root node properties: + - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3", + "google,veyron-minnie-rev2", "google,veyron-minnie-rev1", + "google,veyron-minnie-rev0", "google,veyron-minnie", + "google,veyron", "rockchip,rk3288"; + +- Google Pinky (dev-board): + Required root node properties: + - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", + "google,veyron", "rockchip,rk3288"; + +- Google Speedy (Asus C201 Chromebook): + Required root node properties: + - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8", + "google,veyron-speedy-rev7", "google,veyron-speedy-rev6", + "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", + "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", + "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; + +- Rockchip R88 board: + Required root node properties: + - compatible = "rockchip,r88", "rockchip,rk3368"; diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt new file mode 100644 index 0000000..571d503 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt @@ -0,0 +1,13 @@ +* Clock bindings for Freescale i.MX6 UltraLite + +Required properties: +- compatible: Should be "fsl,imx6ul-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h +for the full list of i.MX6 UltraLite clock IDs. diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt index efb51cf..d8b168e 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt @@ -21,8 +21,8 @@ Required properties: "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32" "st,stih407-plls-c32-a0", "st,clkgen-plls-c32" "st,stih407-plls-c32-a9", "st,clkgen-plls-c32" - "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32" - "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32" + "sst,plls-c32-cx_0", "st,clkgen-plls-c32" + "sst,plls-c32-cx_1", "st,clkgen-plls-c32" "st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32" "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32" diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt index f9c6454..a43d26d 100644 --- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt +++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt @@ -1,5 +1,9 @@ Binding for Synopsys IntelliDDR Multi Protocol Memory Controller +This controller has an optional ECC support in half-bus width (16-bit) +configuration. The ECC controller corrects one bit error and detects +two bit errors. + Required properties: - compatible: Should be 'xlnx,zynq-ddrc-a05' - reg: Base address and size of the controllers memory area diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt new file mode 100644 index 0000000..a81bbf3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt @@ -0,0 +1,36 @@ +* Freescale i.MX6 UltraLite IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx6ul-iomuxc" +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite + Reference Manual for detailed CONFIG settings. + +CONFIG bits definition: +PAD_CTL_HYS (1 << 16) +PAD_CTL_PUS_100K_DOWN (0 << 14) +PAD_CTL_PUS_47K_UP (1 << 14) +PAD_CTL_PUS_100K_UP (2 << 14) +PAD_CTL_PUS_22K_UP (3 << 14) +PAD_CTL_PUE (1 << 13) +PAD_CTL_PKE (1 << 12) +PAD_CTL_ODE (1 << 11) +PAD_CTL_SPEED_LOW (0 << 6) +PAD_CTL_SPEED_MED (1 << 6) +PAD_CTL_SPEED_HIGH (3 << 6) +PAD_CTL_DSE_DISABLE (0 << 3) +PAD_CTL_DSE_260ohm (1 << 3) +PAD_CTL_DSE_130ohm (2 << 3) +PAD_CTL_DSE_87ohm (3 << 3) +PAD_CTL_DSE_65ohm (4 << 3) +PAD_CTL_DSE_52ohm (5 << 3) +PAD_CTL_DSE_43ohm (6 << 3) +PAD_CTL_DSE_37ohm (7 << 3) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt index 32c1c8b..98c9f56 100644 --- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt +++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt @@ -3,6 +3,7 @@ Altera SOCFPGA Reset Manager Required properties: - compatible : "altr,rst-mgr" - reg : Should contain 1 register ranges(address and length) +- altr,modrst-offset : Should contain the offset of the first modrst register. - #reset-cells: 1 Example: @@ -10,4 +11,5 @@ Example: #reset-cells = <1>; compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; }; diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt index 34c1505..5d3791e7 100644 --- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt @@ -5,6 +5,7 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: rtc alarm/event interrupt +- clocks: phandle to input clock. Example: @@ -12,4 +13,5 @@ rtc@fffffe00 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffe00 0x100>; interrupts = <1 4 7>; + clocks = <&clk32k>; }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt index 4ba4dbd..43a8366 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt @@ -8,6 +8,7 @@ Required properties: Wakeup generation for event Alarm. It can also be used to control an external PMIC via the pmic_power_en pin. + - "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family. - reg: Address range of rtc register set - interrupts: rtc timer, alarm interrupts in order - interrupt-parent: phandle for the interrupt controller diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 8d63f1d..a875997 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -7,8 +7,9 @@ Required properties: * "mediatek,mt8173-uart" for MT8173 compatible UARTS * "mediatek,mt6589-uart" for MT6589 compatible UARTS * "mediatek,mt6582-uart" for MT6582 compatible UARTS + * "mediatek,mt6580-uart" for MT6580 compatible UARTS * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582, - MT6577) + MT6580, MT6577) - reg: The base address of the UART register bank. diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index 7c4408f..53a3029 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -2,7 +2,11 @@ Mediatek MT6577, MT6572 and MT6589 Timers --------------------------------------- Required properties: -- compatible: Should be "mediatek,mt6577-timer" +- compatible should contain: + * "mediatek,mt6589-timer" for MT6589 compatible timers + * "mediatek,mt6580-timer" for MT6580 compatible timers + * "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580, + MT6577) - reg: Should contain location and length for timers register. - clocks: Clocks driving the timer hardware. This list should include two clocks. The order is system clock and as second clock the RTC clock. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d444757..d3fbd1f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -46,6 +46,7 @@ chipone ChipOne chipspark ChipSPARK chrp Common Hardware Reference Platform chunghwa Chunghwa Picture Tubes Ltd. +ciaa Computadora Industrial Abierta Argentina cirrus Cirrus Logic, Inc. cloudengines Cloud Engines, Inc. cnm Chips&Media, Inc. @@ -135,6 +136,7 @@ mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. moxa Moxa mpl MPL AG +msi Micro-Star International Co. Ltd. mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) mundoreader Mundo Reader S.L. murata Murata Manufacturing Co., Ltd. @@ -143,6 +145,7 @@ national National Semiconductor neonode Neonode Inc. netgear NETGEAR netlogic Broadcom Corporation (formerly NetLogic Microsystems) +netxeon Shenzhen Netxeon Technology CO., LTD newhaven Newhaven Display International nintendo Nintendo nokia Nokia diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index a4d8697..86fa6de 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -6,6 +6,7 @@ Required properties: - compatible: must be "atmel,at91sam9260-wdt". - reg: physical base address of the controller and length of memory mapped region. +- clocks: phandle to input clock. Optional properties: - timeout-sec: contains the watchdog timeout in seconds. @@ -39,6 +40,7 @@ Example: compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; timeout-sec = <15>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; |