diff options
Diffstat (limited to 'Documentation')
15 files changed, 209 insertions, 25 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt index 6ffe087..9c97de2 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt @@ -38,6 +38,10 @@ Raspberry Pi Compute Module Required root node properties: compatible = "raspberrypi,compute-module", "brcm,bcm2835"; +Raspberry Pi Zero +Required root node properties: +compatible = "raspberrypi,model-zero", "brcm,bcm2835"; + Generic BCM2835 board Required root node properties: compatible = "brcm,bcm2835"; diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt index cfaeda4..f0841ce 100644 --- a/Documentation/devicetree/bindings/arm/davinci.txt +++ b/Documentation/devicetree/bindings/arm/davinci.txt @@ -5,6 +5,10 @@ DA850/OMAP-L138/AM18x Evaluation Module (EVM) board Required root node properties: - compatible = "ti,da850-evm", "ti,da850"; +DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board +Required root node properties: + - compatible = "ti,da850-lcdk", "ti,da850"; + EnBW AM1808 based CMC board Required root node properties: - compatible = "enbw,cmc", "ti,da850; diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt b/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt index 53d4ff9..8946866 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt +++ b/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt @@ -8,8 +8,19 @@ Required root node property: - compatible: must contain "marvell,armada390" -In addition, boards using the Marvell Armada 398 SoC shall have the -following property before the previous one: +In addition, boards using the Marvell Armada 395 SoC shall have the +following property before the common "marvell,armada390" one: + +Required root node property: + +compatible: must contain "marvell,armada395" + +Example: + +compatible = "marvell,a395-gp", "marvell,armada395", "marvell,armada390"; + +Boards using the Marvell Armada 398 SoC shall have the following +property before the common "marvell,armada390" one: Required root node property: diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt new file mode 100644 index 0000000..748a8f2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt @@ -0,0 +1,25 @@ +Marvell Orion SoC Family Device Tree Bindings +--------------------------------------------- + +Boards with a SoC of the Marvell Orion family, eg 88f5181 + +* Required root node properties: +compatible: must contain "marvell,orion5x" + +In addition, the above compatible shall be extended with the specific +SoC. Currently known SoC compatibles are: + +"marvell,orion5x-88f5181" +"marvell,orion5x-88f5182" + +And in addition, the compatible shall be extended with the specific +board. Currently known boards are: + +"buffalo,lsgl" +"buffalo,lswsgl" +"buffalo,lswtgl" +"lacie,ethernet-disk-mini-v2" +"lacie,d2-network" +"marvell,rd-88f5182-nas" +"maxtor,shared-storage-2" +"netgear,wnr854t" diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 94b57f2..f53e2ee 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -180,3 +180,9 @@ Boards: - DRA722 EVM: Software Development Board for DRA722 compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7" + +- DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3" + +- DM3730 Logic PD SOM-LV: Commercial System on Module with WiFi and Bluetooth + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3" diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 6668645..a4f59b5 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -31,6 +31,10 @@ Rockchip platforms device tree bindings or - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288"; +- Firefly Firefly-RK3288 Reload board: + Required root node properties: + - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; + - ChipSPARK PopMetal-RK3288 board: Required root node properties: - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; @@ -110,6 +114,10 @@ Rockchip platforms device tree bindings - Rockchip RK3229 Evaluation board: - compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; +- Rockchip RK3288 Fennec board: + Required root node properties: + - compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; + - Rockchip RK3399 evb: Required root node properties: - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 1df32d3..5484c31d 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -63,9 +63,13 @@ Boards: compatible = "renesas,marzen", "renesas,r8a7779" - Porter (M2-LCDP) compatible = "renesas,porter", "renesas,r8a7791" + - RSKRZA1 (YR0K77210C000BE) + compatible = "renesas,rskrza1", "renesas,r7s72100" - Salvator-X (RTP0RC7795SIPB0010S) compatible = "renesas,salvator-x", "renesas,r8a7795"; - Salvator-X compatible = "renesas,salvator-x", "renesas,r8a7796"; - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" + - Wheat + compatible = "renesas,wheat", "renesas,r8a7792" diff --git a/Documentation/devicetree/bindings/arm/technologic.txt b/Documentation/devicetree/bindings/arm/technologic.txt index 8422988..33797ac 100644 --- a/Documentation/devicetree/bindings/arm/technologic.txt +++ b/Documentation/devicetree/bindings/arm/technologic.txt @@ -4,3 +4,9 @@ Technologic Systems Platforms Device Tree Bindings TS-4800 board Required root node properties: - compatible = "technologic,imx51-ts4800", "fsl,imx51"; + +TS-4900 is a System-on-Module based on the Freescale i.MX6 System-on-Chip. +It can be mounted on a carrier board providing additional peripheral connectors. +Required root node properties: + - compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl" + - compatible = "technologic,imx6q-ts4900", "fsl,imx6q" diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 869a2f0..3cf4421 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -23,6 +23,11 @@ Required properties : Optional properties : - #power-domain-cells : shall contain 1 +- Qualcomm TSENS (thermal sensor device) on some devices can +be part of GCC and hence the TSENS properties can also be +part of the GCC/clock-controller node. +For more details on the TSENS properties please refer +Documentation/devicetree/bindings/thermal/qcom-tsens.txt Example: clock-controller@900000 { @@ -32,3 +37,14 @@ Example: #reset-cells = <1>; #power-domain-cells = <1>; }; + +Example of GCC with TSENS properties: + clock-controller@900000 { + compatible = "qcom,gcc-apq8064"; + reg = <0x00900000 0x4000>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #clock-cells = <1>; + #reset-cells = <1>; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt index a2ec4c1..6394ea9 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt @@ -9,7 +9,7 @@ Required properties: - reg: physical base address of the hdmi and length of memory mapped region. - interrupts: interrupt number to the cpu. -- hpd-gpio: following information about the hotplug gpio pin. +- hpd-gpios: following information about the hotplug gpio pin. a) phandle of the gpio controller node. b) pin number within the gpio controller. c) optional flags and pull up/down. @@ -56,7 +56,7 @@ Example: compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x100000>; interrupts = <0 95 0>; - hpd-gpio = <&gpx3 7 1>; + hpd-gpios = <&gpx3 7 1>; ddc = <&hdmi_ddc_node>; phy = <&hdmi_phy_node>; samsung,syscon-phandle = <&pmu_system_controller>; diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt new file mode 100644 index 0000000..f5e3c6f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt @@ -0,0 +1,47 @@ +TPO TPG110 Panel +================ + +This binding builds on the DPI bindings, adding a few properties +as a superset of a DPI. See panel-dpi.txt for the required DPI +bindings. + +Required properties: +- compatible : "tpo,tpg110" +- grestb-gpios : panel reset GPIO +- scen-gpios : serial control enable GPIO +- scl-gpios : serial control clock line GPIO +- sda-gpios : serial control data line GPIO + +Required nodes: +- Video port for DPI input, see panel-dpi.txt +- Panel timing for DPI setup, see panel-dpi.txt + +Example +------- + +panel { + compatible = "tpo,tpg110", "panel-dpi"; + grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; + scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + backlight = <&bl>; + + port { + nomadik_clcd_panel: endpoint { + remote-endpoint = <&nomadik_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <33200000>; + hactive = <800>; + hback-porch = <216>; + hfront-porch = <40>; + hsync-len = <1>; + vactive = <480>; + vback-porch = <35>; + vfront-porch = <10>; + vsync-len = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt new file mode 100644 index 0000000..ba5ecc1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt @@ -0,0 +1,24 @@ +Broadcom AMAC Ethernet Controller Device Tree Bindings +------------------------------------------------------------- + +Required properties: + - compatible: "brcm,amac" or "brcm,nsp-amac" + - reg: Address and length of the GMAC registers, + Address and length of the GMAC IDM registers + - reg-names: Names of the registers. Must have both "amac_base" and + "idm_base" + - interrupts: Interrupt number + +Optional properties: +- mac-address: See ethernet.txt file in the same directory + +Examples: + +amac0: ethernet@18022000 { + compatible = "brcm,nsp-amac"; + reg = <0x18022000 0x1000>, + <0x18110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt new file mode 100644 index 0000000..022946c --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt @@ -0,0 +1,24 @@ +Broadcom GMAC Ethernet Controller Device Tree Bindings +------------------------------------------------------------- + +Required properties: + - compatible: "brcm,bgmac-nsp" + - reg: Address and length of the GMAC registers, + Address and length of the GMAC IDM registers + - reg-names: Names of the registers. Must have both "gmac_base" and + "idm_base" + - interrupts: Interrupt number + +Optional properties: +- mac-address: See ethernet.txt file in the same directory + +Examples: + +gmac0: ethernet@18022000 { + compatible = "brcm,bgmac-nsp"; + reg = <0x18022000 0x1000>, + <0x18110000 0x1000>; + reg-names = "gmac_base", "idm_base"; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 6db16b9..d49e22d 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -229,6 +229,8 @@ Example: A pin-controller node with pin banks: Example 1: A pin-controller node with pin groups. + #include <dt-bindings/pinctrl/samsung.h> + pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; @@ -238,53 +240,53 @@ Example 1: A pin-controller node with pin groups. uart0_data: uart0-data { samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; uart0_fctl: uart0-fctl { samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; uart1_data: uart1-data { samsung,pins = "gpa0-4", "gpa0-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; uart1_fctl: uart1-fctl { samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; i2c2_bus: i2c2-bus { samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; sd4_bus8: sd4-bus-width8 { part-1 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; part-2 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <4>; - samsung,pin-pud = <4>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; }; }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 77e985f..24c6f65 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -101,6 +101,7 @@ ezchip EZchip Semiconductor fcs Fairchild Semiconductor firefly Firefly focaltech FocalTech Systems Co.,Ltd +friendlyarm Guangzhou FriendlyARM Computer Tech Co., Ltd fsl Freescale Semiconductor ge General Electric Company geekbuying GeekBuying @@ -137,6 +138,7 @@ innolux Innolux Corporation intel Intel Corporation intercontrol Inter Control Group invensense InvenSense Inc. +inversepath Inverse Path iom Iomega Corporation isee ISEE 2007 S.L. isil Intersil @@ -280,6 +282,7 @@ toshiba Toshiba Corporation toumaz Toumaz tpk TPK U.S.A. LLC tplink TP-LINK Technologies Co., Ltd. +tpo TPO tronfy Tronfy tronsmart Tronsmart truly Truly Semiconductors Limited |