diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/DocBook/device-drivers.tmpl | 36 | ||||
| -rw-r--r-- | Documentation/arm64/silicon-errata.txt | 1 | ||||
| -rw-r--r-- | Documentation/kdump/gdbmacros.txt | 93 | ||||
| -rw-r--r-- | Documentation/networking/dsa/dsa.txt | 17 | ||||
| -rw-r--r-- | Documentation/networking/ip-sysctl.txt | 8 |
5 files changed, 130 insertions, 25 deletions
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index de79efd..8c68768 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -128,16 +128,44 @@ X!Edrivers/base/interface.c !Edrivers/base/platform.c !Edrivers/base/bus.c </sect1> - <sect1><title>Device Drivers DMA Management</title> + <sect1> + <title>Buffer Sharing and Synchronization</title> + <para> + The dma-buf subsystem provides the framework for sharing buffers + for hardware (DMA) access across multiple device drivers and + subsystems, and for synchronizing asynchronous hardware access. + </para> + <para> + This is used, for example, by drm "prime" multi-GPU support, but + is of course not limited to GPU use cases. + </para> + <para> + The three main components of this are: (1) dma-buf, representing + a sg_table and exposed to userspace as a file descriptor to allow + passing between devices, (2) fence, which provides a mechanism + to signal when one device as finished access, and (3) reservation, + which manages the shared or exclusive fence(s) associated with + the buffer. + </para> + <sect2><title>dma-buf</title> !Edrivers/dma-buf/dma-buf.c +!Iinclude/linux/dma-buf.h + </sect2> + <sect2><title>reservation</title> +!Pdrivers/dma-buf/reservation.c Reservation Object Overview +!Edrivers/dma-buf/reservation.c +!Iinclude/linux/reservation.h + </sect2> + <sect2><title>fence</title> !Edrivers/dma-buf/fence.c -!Edrivers/dma-buf/seqno-fence.c !Iinclude/linux/fence.h +!Edrivers/dma-buf/seqno-fence.c !Iinclude/linux/seqno-fence.h -!Edrivers/dma-buf/reservation.c -!Iinclude/linux/reservation.h !Edrivers/dma-buf/sync_file.c !Iinclude/linux/sync_file.h + </sect2> + </sect1> + <sect1><title>Device Drivers DMA Management</title> !Edrivers/base/dma-coherent.c !Edrivers/base/dma-mapping.c </sect1> diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index c6938e5..4da60b4 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -56,6 +56,7 @@ stable kernels. | ARM | MMU-500 | #841119,#826419 | N/A | | | | | | | Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 | +| Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 | | Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 | | Cavium | ThunderX Core | #27456 | CAVIUM_ERRATUM_27456 | | Cavium | ThunderX SMMUv2 | #27704 | N/A | diff --git a/Documentation/kdump/gdbmacros.txt b/Documentation/kdump/gdbmacros.txt index 35f6a98..220d0a8 100644 --- a/Documentation/kdump/gdbmacros.txt +++ b/Documentation/kdump/gdbmacros.txt @@ -170,21 +170,92 @@ document trapinfo address the kernel panicked. end +define dump_log_idx + set $idx = $arg0 + if ($argc > 1) + set $prev_flags = $arg1 + else + set $prev_flags = 0 + end + set $msg = ((struct printk_log *) (log_buf + $idx)) + set $prefix = 1 + set $newline = 1 + set $log = log_buf + $idx + sizeof(*$msg) -define dmesg - set $i = 0 - set $end_idx = (log_end - 1) & (log_buf_len - 1) + # prev & LOG_CONT && !(msg->flags & LOG_PREIX) + if (($prev_flags & 8) && !($msg->flags & 4)) + set $prefix = 0 + end + + # msg->flags & LOG_CONT + if ($msg->flags & 8) + # (prev & LOG_CONT && !(prev & LOG_NEWLINE)) + if (($prev_flags & 8) && !($prev_flags & 2)) + set $prefix = 0 + end + # (!(msg->flags & LOG_NEWLINE)) + if (!($msg->flags & 2)) + set $newline = 0 + end + end + + if ($prefix) + printf "[%5lu.%06lu] ", $msg->ts_nsec / 1000000000, $msg->ts_nsec % 1000000000 + end + if ($msg->text_len != 0) + eval "printf \"%%%d.%ds\", $log", $msg->text_len, $msg->text_len + end + if ($newline) + printf "\n" + end + if ($msg->dict_len > 0) + set $dict = $log + $msg->text_len + set $idx = 0 + set $line = 1 + while ($idx < $msg->dict_len) + if ($line) + printf " " + set $line = 0 + end + set $c = $dict[$idx] + if ($c == '\0') + printf "\n" + set $line = 1 + else + if ($c < ' ' || $c >= 127 || $c == '\\') + printf "\\x%02x", $c + else + printf "%c", $c + end + end + set $idx = $idx + 1 + end + printf "\n" + end +end +document dump_log_idx + Dump a single log given its index in the log buffer. The first + parameter is the index into log_buf, the second is optional and + specified the previous log buffer's flags, used for properly + formatting continued lines. +end - while ($i < logged_chars) - set $idx = (log_end - 1 - logged_chars + $i) & (log_buf_len - 1) +define dmesg + set $i = log_first_idx + set $end_idx = log_first_idx + set $prev_flags = 0 - if ($idx + 100 <= $end_idx) || \ - ($end_idx <= $idx && $idx + 100 < log_buf_len) - printf "%.100s", &log_buf[$idx] - set $i = $i + 100 + while (1) + set $msg = ((struct printk_log *) (log_buf + $i)) + if ($msg->len == 0) + set $i = 0 else - printf "%c", log_buf[$idx] - set $i = $i + 1 + dump_log_idx $i $prev_flags + set $i = $i + $msg->len + set $prev_flags = $msg->flags + end + if ($i == $end_idx) + loop_break end end end diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 631b0f7..9d05ed7 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -369,8 +369,6 @@ does not allocate any driver private context space. Switch configuration -------------------- -- priv_size: additional size needed by the switch driver for its private context - - tag_protocol: this is to indicate what kind of tagging protocol is supported, should be a valid value from the dsa_tag_protocol enum @@ -416,11 +414,6 @@ PHY devices and link management to the switch port MDIO registers. If unavailable return a negative error code. -- poll_link: Function invoked by DSA to query the link state of the switch - builtin Ethernet PHYs, per port. This function is responsible for calling - netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a - single call. Executes from workqueue context. - - adjust_link: Function invoked by the PHY library when a slave network device is attached to a PHY device. This function is responsible for appropriately configuring the switch port link parameters: speed, duplex, pause based on @@ -542,6 +535,16 @@ Bridge layer Bridge VLAN filtering --------------------- +- port_vlan_filtering: bridge layer function invoked when the bridge gets + configured for turning on or off VLAN filtering. If nothing specific needs to + be done at the hardware level, this callback does not need to be implemented. + When VLAN filtering is turned on, the hardware must be programmed with + rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed + VLAN ID map/rules. If there is no PVID programmed into the switch port, + untagged frames must be rejected as well. When turned off the switch must + accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are + allowed. + - port_vlan_prepare: bridge layer function invoked when the bridge prepares the configuration of a VLAN on the given port. If the operation is not supported by the hardware, this function should return -EOPNOTSUPP to inform the bridge diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 6c7f365b..9ae9293 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1036,15 +1036,17 @@ proxy_arp_pvlan - BOOLEAN shared_media - BOOLEAN Send(router) or accept(host) RFC1620 shared media redirects. - Overrides ip_secure_redirects. + Overrides secure_redirects. shared_media for the interface will be enabled if at least one of conf/{all,interface}/shared_media is set to TRUE, it will be disabled otherwise default TRUE secure_redirects - BOOLEAN - Accept ICMP redirect messages only for gateways, - listed in default gateway list. + Accept ICMP redirect messages only to gateways listed in the + interface's current gateway list. Even if disabled, RFC1122 redirect + rules still apply. + Overridden by shared_media. secure_redirects for the interface will be enabled if at least one of conf/{all,interface}/secure_redirects is set to TRUE, it will be disabled otherwise |