diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt | 8 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/iommu/arm,smmu.txt | 61 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pci/pci-iommu.txt | 171 |
3 files changed, 225 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt index 7b94c88..be57550 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt @@ -27,6 +27,12 @@ the PCIe specification. * "cmdq-sync" - CMD_SYNC complete * "gerror" - Global Error activated +- #iommu-cells : See the generic IOMMU binding described in + devicetree/bindings/pci/pci-iommu.txt + for details. For SMMUv3, must be 1, with each cell + describing a single stream ID. All possible stream + IDs which a device may emit must be described. + ** SMMUv3 optional properties: - dma-coherent : Present if DMA operations made by the SMMU (page @@ -54,6 +60,6 @@ the PCIe specification. <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>; interrupt-names = "eventq", "priq", "cmdq-sync", "gerror"; dma-coherent; - #iommu-cells = <0>; + #iommu-cells = <1>; msi-parent = <&its 0xff0000>; }; diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt index 19fe6f2..e862d148 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt @@ -35,12 +35,16 @@ conditions. interrupt per context bank. In the case of a single, combined interrupt, it must be listed multiple times. -- mmu-masters : A list of phandles to device nodes representing bus - masters for which the SMMU can provide a translation - and their corresponding StreamIDs (see example below). - Each device node linked from this list must have a - "#stream-id-cells" property, indicating the number of - StreamIDs associated with it. +- #iommu-cells : See Documentation/devicetree/bindings/iommu/iommu.txt + for details. With a value of 1, each "iommus" entry + represents a distinct stream ID emitted by that device + into the relevant SMMU. + + SMMUs with stream matching support and complex masters + may use a value of 2, where the second cell represents + an SMR mask to combine with the ID in the first cell. + Care must be taken to ensure the set of matched IDs + does not result in conflicts. ** System MMU optional properties: @@ -56,9 +60,20 @@ conditions. aliases of secure registers have to be used during SMMU configuration. -Example: +** Deprecated properties: + +- mmu-masters (deprecated in favour of the generic "iommus" binding) : + A list of phandles to device nodes representing bus + masters for which the SMMU can provide a translation + and their corresponding Stream IDs. Each device node + linked from this list must have a "#stream-id-cells" + property, indicating the number of Stream ID + arguments associated with its phandle. - smmu { +** Examples: + + /* SMMU with stream matching or stream indexing */ + smmu1: iommu { compatible = "arm,smmu-v1"; reg = <0xba5e0000 0x10000>; #global-interrupts = <2>; @@ -68,11 +83,29 @@ Example: <0 35 4>, <0 36 4>, <0 37 4>; + #iommu-cells = <1>; + }; + + /* device with two stream IDs, 0 and 7 */ + master1 { + iommus = <&smmu1 0>, + <&smmu1 7>; + }; + + + /* SMMU with stream matching */ + smmu2: iommu { + ... + #iommu-cells = <2>; + }; + + /* device with stream IDs 0 and 7 */ + master2 { + iommus = <&smmu2 0 0>, + <&smmu2 7 0>; + }; - /* - * Two DMA controllers, the first with two StreamIDs (0xd01d - * and 0xd01e) and the second with only one (0xd11c). - */ - mmu-masters = <&dma0 0xd01d 0xd01e>, - <&dma1 0xd11c>; + /* device with stream IDs 1, 17, 33 and 49 */ + master3 { + iommus = <&smmu2 1 0x30>; }; diff --git a/Documentation/devicetree/bindings/pci/pci-iommu.txt b/Documentation/devicetree/bindings/pci/pci-iommu.txt new file mode 100644 index 0000000..56c8296 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-iommu.txt @@ -0,0 +1,171 @@ +This document describes the generic device tree binding for describing the +relationship between PCI(e) devices and IOMMU(s). + +Each PCI(e) device under a root complex is uniquely identified by its Requester +ID (AKA RID). A Requester ID is a triplet of a Bus number, Device number, and +Function number. + +For the purpose of this document, when treated as a numeric value, a RID is +formatted such that: + +* Bits [15:8] are the Bus number. +* Bits [7:3] are the Device number. +* Bits [2:0] are the Function number. +* Any other bits required for padding must be zero. + +IOMMUs may distinguish PCI devices through sideband data derived from the +Requester ID. While a given PCI device can only master through one IOMMU, a +root complex may split masters across a set of IOMMUs (e.g. with one IOMMU per +bus). + +The generic 'iommus' property is insufficient to describe this relationship, +and a mechanism is required to map from a PCI device to its IOMMU and sideband +data. + +For generic IOMMU bindings, see +Documentation/devicetree/bindings/iommu/iommu.txt. + + +PCI root complex +================ + +Optional properties +------------------- + +- iommu-map: Maps a Requester ID to an IOMMU and associated iommu-specifier + data. + + The property is an arbitrary number of tuples of + (rid-base,iommu,iommu-base,length). + + Any RID r in the interval [rid-base, rid-base + length) is associated with + the listed IOMMU, with the iommu-specifier (r - rid-base + iommu-base). + +- iommu-map-mask: A mask to be applied to each Requester ID prior to being + mapped to an iommu-specifier per the iommu-map property. + + +Example (1) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + iommu: iommu@a { + reg = <0xa 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the IOMMU is the RID, + * identity-mapped. + */ + iommu-map = <0x0 &iommu 0x0 0x10000>; + }; +}; + + +Example (2) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + iommu: iommu@a { + reg = <0xa 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the IOMMU is the RID with the + * function bits masked out. + */ + iommu-map = <0x0 &iommu 0x0 0x10000>; + iommu-map-mask = <0xfff8>; + }; +}; + + +Example (3) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + iommu: iommu@a { + reg = <0xa 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the IOMMU is the RID, + * but the high bits of the bus number are flipped. + */ + iommu-map = <0x0000 &iommu 0x8000 0x8000>, + <0x8000 &iommu 0x0000 0x8000>; + }; +}; + + +Example (4) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + iommu_a: iommu@a { + reg = <0xa 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + iommu_b: iommu@b { + reg = <0xb 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + iommu_c: iommu@c { + reg = <0xc 0x1>; + compatible = "vendor,some-iommu"; + #iommu-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * Devices with bus number 0-127 are mastered via IOMMU + * a, with sideband data being RID[14:0]. + * Devices with bus number 128-255 are mastered via + * IOMMU b, with sideband data being RID[14:0]. + * No devices master via IOMMU c. + */ + iommu-map = <0x0000 &iommu_a 0x0000 0x8000>, + <0x8000 &iommu_b 0x0000 0x8000>; + }; +}; |