diff options
Diffstat (limited to 'Documentation')
108 files changed, 1519 insertions, 318 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-ib_srp b/Documentation/ABI/stable/sysfs-driver-ib_srp index b9688de..7049a2b 100644 --- a/Documentation/ABI/stable/sysfs-driver-ib_srp +++ b/Documentation/ABI/stable/sysfs-driver-ib_srp @@ -55,12 +55,12 @@ Description: Interface for making ib_srp connect to a new target. only safe with partial memory descriptor list support enabled (allow_ext_sg=1). * comp_vector, a number in the range 0..n-1 specifying the - MSI-X completion vector. Some HCA's allocate multiple (n) - MSI-X vectors per HCA port. If the IRQ affinity masks of - these interrupts have been configured such that each MSI-X - interrupt is handled by a different CPU then the comp_vector - parameter can be used to spread the SRP completion workload - over multiple CPU's. + MSI-X completion vector of the first RDMA channel. Some + HCA's allocate multiple (n) MSI-X vectors per HCA port. If + the IRQ affinity masks of these interrupts have been + configured such that each MSI-X interrupt is handled by a + different CPU then the comp_vector parameter can be used to + spread the SRP completion workload over multiple CPU's. * tl_retry_count, a number in the range 2..7 specifying the IB RC retry count. * queue_size, the maximum number of commands that the @@ -88,6 +88,13 @@ Description: Whether ib_srp is allowed to include a partial memory descriptor list in an SRP_CMD when communicating with an SRP target. +What: /sys/class/scsi_host/host<n>/ch_count +Date: April 1, 2015 +KernelVersion: 3.19 +Contact: linux-rdma@vger.kernel.org +Description: Number of RDMA channels used for communication with the SRP + target. + What: /sys/class/scsi_host/host<n>/cmd_sg_entries Date: May 19, 2011 KernelVersion: 2.6.39 @@ -95,6 +102,12 @@ Contact: linux-rdma@vger.kernel.org Description: Maximum number of data buffer descriptors that may be sent to the target in a single SRP_CMD request. +What: /sys/class/scsi_host/host<n>/comp_vector +Date: September 2, 2013 +KernelVersion: 3.11 +Contact: linux-rdma@vger.kernel.org +Description: Completion vector used for the first RDMA channel. + What: /sys/class/scsi_host/host<n>/dgid Date: June 17, 2006 KernelVersion: 2.6.17 diff --git a/Documentation/ABI/testing/sysfs-ibft b/Documentation/ABI/testing/sysfs-ibft index c2b7d11..cac3930 100644 --- a/Documentation/ABI/testing/sysfs-ibft +++ b/Documentation/ABI/testing/sysfs-ibft @@ -20,4 +20,4 @@ Date: November 2007 Contact: Konrad Rzeszutek <ketuzsezr@darnok.org> Description: The /sys/firmware/ibft/ethernetX directory will contain files that expose the iSCSI Boot Firmware Table NIC data. - This can this can the IP address, MAC, and gateway of the NIC. + Usually this contains the IP address, MAC, and gateway of the NIC. diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index df2962d..8bf7c61 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -25,7 +25,7 @@ GENFILES := $(addprefix $(MEDIA_OBJ_DIR)/, $(MEDIA_TEMP)) PHONY += cleanmediadocs cleanmediadocs: - -@rm `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null + -@rm -f `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null $(obj)/media_api.xml: $(GENFILES) FORCE diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index 07ffc76..0a2debf 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2566,6 +2566,10 @@ fields changed from _s32 to _u32. <para>Added compound control types and &VIDIOC-QUERY-EXT-CTRL;. </para> </listitem> + </orderedlist> + </section> + + <section> <title>V4L2 in Linux 3.18</title> <orderedlist> <listitem> diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 57cf5ef..93aa860 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -324,7 +324,6 @@ tree, they need to be integration-tested. For this purpose, a special testing repository exists into which virtually all subsystem trees are pulled on an almost daily basis: http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git - http://linux.f-seidel.de/linux-next/pmwiki/ This way, the -next kernel gives a summary outlook onto what will be expected to go into the mainline kernel at the next merge period. diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt index bf77833..745f429 100644 --- a/Documentation/RCU/rcu.txt +++ b/Documentation/RCU/rcu.txt @@ -36,7 +36,7 @@ o How can the updater tell when a grace period has completed executed in user mode, or executed in the idle loop, we can safely free up that item. - Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the + Preemptible variants of RCU (CONFIG_PREEMPT_RCU) get the same effect, but require that the readers manipulate CPU-local counters. These counters allow limited types of blocking within RCU read-side critical sections. SRCU also uses CPU-local @@ -81,7 +81,7 @@ o I hear that RCU is patented? What is with that? o I hear that RCU needs work in order to support realtime kernels? This work is largely completed. Realtime-friendly RCU can be - enabled via the CONFIG_TREE_PREEMPT_RCU kernel configuration + enabled via the CONFIG_PREEMPT_RCU kernel configuration parameter. However, work is in progress for enabling priority boosting of preempted RCU read-side critical sections. This is needed if you have CPU-bound realtime threads. diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index ef5a2fd..ed186a9 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -26,12 +26,6 @@ CONFIG_RCU_CPU_STALL_TIMEOUT Stall-warning messages may be enabled and disabled completely via /sys/module/rcupdate/parameters/rcu_cpu_stall_suppress. -CONFIG_RCU_CPU_STALL_VERBOSE - - This kernel configuration parameter causes the stall warning to - also dump the stacks of any tasks that are blocking the current - RCU-preempt grace period. - CONFIG_RCU_CPU_STALL_INFO This kernel configuration parameter causes the stall warning to @@ -77,7 +71,7 @@ This message indicates that CPU 5 detected that it was causing a stall, and that the stall was affecting RCU-sched. This message will normally be followed by a stack dump of the offending CPU. On TREE_RCU kernel builds, RCU and RCU-sched are implemented by the same underlying mechanism, -while on TREE_PREEMPT_RCU kernel builds, RCU is instead implemented +while on PREEMPT_RCU kernel builds, RCU is instead implemented by rcu_preempt_state. On the other hand, if the offending CPU fails to print out a stall-warning @@ -89,7 +83,7 @@ INFO: rcu_bh_state detected stalls on CPUs/tasks: { 3 5 } (detected by 2, 2502 j This message indicates that CPU 2 detected that CPUs 3 and 5 were both causing stalls, and that the stall was affecting RCU-bh. This message will normally be followed by stack dumps for each CPU. Please note that -TREE_PREEMPT_RCU builds can be stalled by tasks as well as by CPUs, +PREEMPT_RCU builds can be stalled by tasks as well as by CPUs, and that the tasks will be indicated by PID, for example, "P3421". It is even possible for a rcu_preempt_state stall to be caused by both CPUs -and- tasks, in which case the offending CPUs and tasks will all @@ -205,10 +199,10 @@ o A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might o A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that is running at a higher priority than the RCU softirq threads. This will prevent RCU callbacks from ever being invoked, - and in a CONFIG_TREE_PREEMPT_RCU kernel will further prevent + and in a CONFIG_PREEMPT_RCU kernel will further prevent RCU grace periods from ever completing. Either way, the system will eventually run out of memory and hang. In the - CONFIG_TREE_PREEMPT_RCU case, you might see stall-warning + CONFIG_PREEMPT_RCU case, you might see stall-warning messages. o A hardware or software issue shuts off the scheduler-clock diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index 910870b..b63b9bb 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -8,7 +8,7 @@ The following sections describe the debugfs files and formats, first for rcutree and next for rcutiny. -CONFIG_TREE_RCU and CONFIG_TREE_PREEMPT_RCU debugfs Files and Formats +CONFIG_TREE_RCU and CONFIG_PREEMPT_RCU debugfs Files and Formats These implementations of RCU provide several debugfs directories under the top-level directory "rcu": @@ -18,7 +18,7 @@ rcu/rcu_preempt rcu/rcu_sched Each directory contains files for the corresponding flavor of RCU. -Note that rcu/rcu_preempt is only present for CONFIG_TREE_PREEMPT_RCU. +Note that rcu/rcu_preempt is only present for CONFIG_PREEMPT_RCU. For CONFIG_TREE_RCU, the RCU flavor maps onto the RCU-sched flavor, so that activity for both appears in rcu/rcu_sched. diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index e48c57f..88dfce1 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -137,7 +137,7 @@ rcu_read_lock() Used by a reader to inform the reclaimer that the reader is entering an RCU read-side critical section. It is illegal to block while in an RCU read-side critical section, though - kernels built with CONFIG_TREE_PREEMPT_RCU can preempt RCU + kernels built with CONFIG_PREEMPT_RCU can preempt RCU read-side critical sections. Any RCU-protected data structure accessed during an RCU read-side critical section is guaranteed to remain unreclaimed for the full duration of that critical section. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 482c749..1fa1caa 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -483,12 +483,10 @@ have been included in the discussion 14) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes: -If this patch fixes a problem reported by somebody else, consider adding a -Reported-by: tag to credit the reporter for their contribution. Please -note that this tag should not be added without the reporter's permission, -especially if the problem was not reported in a public forum. That said, -if we diligently credit our bug reporters, they will, hopefully, be -inspired to help us again in the future. +The Reported-by tag gives credit to people who find bugs and report them and it +hopefully inspires them to help us again in the future. Please note that if +the bug was reported in private, then ask for permission first before using the +Reported-by tag. A Tested-by: tag indicates that the patch has been successfully tested (in some environment) by the person named. This tag informs maintainers that diff --git a/Documentation/arm/firmware.txt b/Documentation/arm/firmware.txt index c2e468f..da6713a 100644 --- a/Documentation/arm/firmware.txt +++ b/Documentation/arm/firmware.txt @@ -7,32 +7,14 @@ world, which changes the way some things have to be initialized. This makes a need to provide an interface for such platforms to specify available firmware operations and call them when needed. -Firmware operations can be specified using struct firmware_ops - - struct firmware_ops { - /* - * Enters CPU idle mode - */ - int (*do_idle)(void); - /* - * Sets boot address of specified physical CPU - */ - int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr); - /* - * Boots specified physical CPU - */ - int (*cpu_boot)(int cpu); - /* - * Initializes L2 cache - */ - int (*l2x0_init)(void); - }; - -and then registered with register_firmware_ops function +Firmware operations can be specified by filling in a struct firmware_ops +with appropriate callbacks and then registering it with register_firmware_ops() +function. void register_firmware_ops(const struct firmware_ops *ops) -the ops pointer must be non-NULL. +The ops pointer must be non-NULL. More information about struct firmware_ops +and its members can be found in arch/arm/include/asm/firmware.h header. There is a default, empty set of operations provided, so there is no need to set anything if platform does not require firmware operations. diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README index 7945238..e68d163 100644 --- a/Documentation/arm/sunxi/README +++ b/Documentation/arm/sunxi/README @@ -37,16 +37,26 @@ SunXi family http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf - Allwinner A23 - + Not Supported + + Datasheet + http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf + + User Manual + http://dl.linux-sunxi.org/A23/A23%20User%20Manual%20V1.0%2020130830.pdf * Quad ARM Cortex-A7 based SoCs - Allwinner A31 (sun6i) + Datasheet - http://dl.linux-sunxi.org/A31/A31%20Datasheet%20-%20v1.00%20(2012-12-24).pdf + http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20datasheet%20V1.3%2020131106.pdf + + User Manual + http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20user%20manual%20V1.1%2020130630.pdf - Allwinner A31s (sun6i) + Not Supported + + Datasheet + http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20datasheet%20V1.3%2020131106.pdf + + User Manual + http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs - Allwinner A80 - + Not Supported
\ No newline at end of file + + Datasheet + http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf diff --git a/Documentation/arm64/legacy_instructions.txt b/Documentation/arm64/legacy_instructions.txt new file mode 100644 index 0000000..a3b3da2 --- /dev/null +++ b/Documentation/arm64/legacy_instructions.txt @@ -0,0 +1,45 @@ +The arm64 port of the Linux kernel provides infrastructure to support +emulation of instructions which have been deprecated, or obsoleted in +the architecture. The infrastructure code uses undefined instruction +hooks to support emulation. Where available it also allows turning on +the instruction execution in hardware. + +The emulation mode can be controlled by writing to sysctl nodes +(/proc/sys/abi). The following explains the different execution +behaviours and the corresponding values of the sysctl nodes - + +* Undef + Value: 0 + Generates undefined instruction abort. Default for instructions that + have been obsoleted in the architecture, e.g., SWP + +* Emulate + Value: 1 + Uses software emulation. To aid migration of software, in this mode + usage of emulated instruction is traced as well as rate limited + warnings are issued. This is the default for deprecated + instructions, .e.g., CP15 barriers + +* Hardware Execution + Value: 2 + Although marked as deprecated, some implementations may support the + enabling/disabling of hardware support for the execution of these + instructions. Using hardware execution generally provides better + performance, but at the loss of ability to gather runtime statistics + about the use of the deprecated instructions. + +The default mode depends on the status of the instruction in the +architecture. Deprecated instructions should default to emulation +while obsolete instructions must be undefined by default. + +Supported legacy instructions +----------------------------- +* SWP{B} +Node: /proc/sys/abi/swp +Status: Obsolete +Default: Undef (0) + +* CP15 Barriers +Node: /proc/sys/abi/cp15_barrier +Status: Deprecated +Default: Emulate (1) diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt index 68542fe..183e41b 100644 --- a/Documentation/atomic_ops.txt +++ b/Documentation/atomic_ops.txt @@ -7,12 +7,13 @@ maintainers on how to implement atomic counter, bitops, and spinlock interfaces properly. - The atomic_t type should be defined as a signed integer. -Also, it should be made opaque such that any kind of cast to a normal -C integer type will fail. Something like the following should -suffice: + The atomic_t type should be defined as a signed integer and +the atomic_long_t type as a signed long integer. Also, they should +be made opaque such that any kind of cast to a normal C integer type +will fail. Something like the following should suffice: typedef struct { int counter; } atomic_t; + typedef struct { long counter; } atomic_long_t; Historically, counter has been declared volatile. This is now discouraged. See Documentation/volatile-considered-harmful.txt for the complete rationale. @@ -37,6 +38,9 @@ initializer is used before runtime. If the initializer is used at runtime, a proper implicit or explicit read memory barrier is needed before reading the value with atomic_read from another thread. +As with all of the atomic_ interfaces, replace the leading "atomic_" +with "atomic_long_" to operate on atomic_long_t. + The second interface can be used at runtime, as in: struct foo { atomic_t counter; }; diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 2101e71..6b972b2 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -827,10 +827,6 @@ but in the event of any barrier requests in the tag queue we need to ensure that requests are restarted in the order they were queue. This may happen if the driver needs to use blk_queue_invalidate_tags(). -Tagging also defines a new request flag, REQ_QUEUED. This is set whenever -a request is currently tagged. You should not use this flag directly, -blk_rq_tagged(rq) is the portable way to do so. - 3.3 I/O Submission The routine submit_bio() is used to submit a single io. Higher level i/o diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process index 2e06179..c24e156 100644 --- a/Documentation/development-process/2.Process +++ b/Documentation/development-process/2.Process @@ -289,10 +289,6 @@ lists when they are assembled; they can be downloaded from: http://www.kernel.org/pub/linux/kernel/next/ -Some information about linux-next has been gathered at: - - http://linux.f-seidel.de/linux-next/pmwiki/ - Linux-next has become an integral part of the kernel development process; all patches merged during a given merge window should really have found their way into linux-next some time before the merge window opens. diff --git a/Documentation/development-process/8.Conclusion b/Documentation/development-process/8.Conclusion index 1990ab4..caef690 100644 --- a/Documentation/development-process/8.Conclusion +++ b/Documentation/development-process/8.Conclusion @@ -22,10 +22,6 @@ Beyond that, a valuable resource for kernel developers is: http://kernelnewbies.org/ -Information about the linux-next tree gathers at: - - http://linux.f-seidel.de/linux-next/pmwiki/ - And, of course, one should not forget http://kernel.org/, the definitive location for kernel release information. diff --git a/Documentation/device-mapper/cache-policies.txt b/Documentation/device-mapper/cache-policies.txt index 66c2774..0d124a9 100644 --- a/Documentation/device-mapper/cache-policies.txt +++ b/Documentation/device-mapper/cache-policies.txt @@ -47,20 +47,26 @@ Message and constructor argument pairs are: 'discard_promote_adjustment <value>' The sequential threshold indicates the number of contiguous I/Os -required before a stream is treated as sequential. The random threshold +required before a stream is treated as sequential. Once a stream is +considered sequential it will bypass the cache. The random threshold is the number of intervening non-contiguous I/Os that must be seen before the stream is treated as random again. The sequential and random thresholds default to 512 and 4 respectively. -Large, sequential ios are probably better left on the origin device -since spindles tend to have good bandwidth. The io_tracker counts -contiguous I/Os to try to spot when the io is in one of these sequential -modes. - -Internally the mq policy maintains a promotion threshold variable. If -the hit count of a block not in the cache goes above this threshold it -gets promoted to the cache. The read, write and discard promote adjustment +Large, sequential I/Os are probably better left on the origin device +since spindles tend to have good sequential I/O bandwidth. The +io_tracker counts contiguous I/Os to try to spot when the I/O is in one +of these sequential modes. But there are use-cases for wanting to +promote sequential blocks to the cache (e.g. fast application startup). +If sequential threshold is set to 0 the sequential I/O detection is +disabled and sequential I/O will no longer implicitly bypass the cache. +Setting the random threshold to 0 does _not_ disable the random I/O +stream detection. + +Internally the mq policy determines a promotion threshold. If the hit +count of a block not in the cache goes above this threshold it gets +promoted to the cache. The read, write and discard promote adjustment tunables allow you to tweak the promotion threshold by adding a small value based on the io type. They default to 4, 8 and 1 respectively. If you're trying to quickly warm a new cache device you may wish to diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 7eece72..8fe8150 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -2,7 +2,9 @@ Amlogic MesonX device tree bindings ------------------------------------------- Boards with the Amlogic Meson6 SoC shall have the following properties: + Required root node property: + compatible: "amlogic,meson6" -Required root node property: - -compatible = "amlogic,meson6"; +Boards with the Amlogic Meson8 SoC shall have the following properties: + Required root node property: + compatible: "amlogic,meson8"; diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt index 37b2caf..256b4d8 100644 --- a/Documentation/devicetree/bindings/arm/arch_timer.txt +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -22,6 +22,14 @@ to deliver its interrupts via SPIs. - always-on : a boolean property. If present, the timer is powered through an always-on power domain, therefore it never loses context. +** Optional properties: + +- arm,cpu-registers-not-fw-configured : Firmware does not initialize + any of the generic timer CPU registers, which contain their + architecturally-defined reset values. Only supported for 32-bit + systems which follow the ARMv7 architected reset values. + + Example: timer { diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index c554ed3..556c866 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -92,3 +92,68 @@ Required nodes: - core-module: the root node to the Versatile platforms must have a core-module with regs and the compatible strings "arm,core-module-versatile", "syscon" + +ARM RealView Boards +------------------- +The RealView boards cover tailored evaluation boards that are used to explore +the ARM11 and Cortex A-8 and Cortex A-9 processors. + +Required properties (in root node): + /* RealView Emulation Baseboard */ + compatible = "arm,realview-eb"; + /* RealView Platform Baseboard for ARM1176JZF-S */ + compatible = "arm,realview-pb1176"; + /* RealView Platform Baseboard for ARM11 MPCore */ + compatible = "arm,realview-pb11mp"; + /* RealView Platform Baseboard for Cortex A-8 */ + compatible = "arm,realview-pba8"; + /* RealView Platform Baseboard Explore for Cortex A-9 */ + compatible = "arm,realview-pbx"; + +Required nodes: + +- soc: some node of the RealView platforms must be the SoC + node that contain the SoC-specific devices, withe the compatible + string set to one of these tuples: + "arm,realview-eb-soc", "simple-bus" + "arm,realview-pb1176-soc", "simple-bus" + "arm,realview-pb11mp-soc", "simple-bus" + "arm,realview-pba8-soc", "simple-bus" + "arm,realview-pbx-soc", "simple-bus" + +- syscon: some subnode of the RealView SoC node must be a + system controller node pointing to the control registers, + with the compatible string set to one of these tuples: + "arm,realview-eb-syscon", "syscon" + "arm,realview-pb1176-syscon", "syscon" + "arm,realview-pb11mp-syscon", "syscon" + "arm,realview-pba8-syscon", "syscon" + "arm,realview-pbx-syscon", "syscon" + + Required properties for the system controller: + - regs: the location and size of the system controller registers, + one range of 0x1000 bytes. + +Example: + +/dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> +#include "skeleton.dtsi" + +/ { + model = "ARM RealView PB1176 with device tree"; + compatible = "arm,realview-pb1176"; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,realview-pb1176-soc", "simple-bus"; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-syscon", "syscon"; + reg = <0x10000000 0x1000>; + }; + + }; +}; diff --git a/Documentation/devicetree/bindings/arm/bcm/cygnus.txt b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt new file mode 100644 index 0000000..4c77169 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/cygnus.txt @@ -0,0 +1,31 @@ +Broadcom Cygnus device tree bindings +------------------------------------ + + +Boards with Cygnus SoCs shall have the following properties: + +Required root node property: + +BCM11300 +compatible = "brcm,bcm11300", "brcm,cygnus"; + +BCM11320 +compatible = "brcm,bcm11320", "brcm,cygnus"; + +BCM11350 +compatible = "brcm,bcm11350", "brcm,cygnus"; + +BCM11360 +compatible = "brcm,bcm11360", "brcm,cygnus"; + +BCM58300 +compatible = "brcm,bcm58300", "brcm,cygnus"; + +BCM58302 +compatible = "brcm,bcm58302", "brcm,cygnus"; + +BCM58303 +compatible = "brcm,bcm58303", "brcm,cygnus"; + +BCM58305 +compatible = "brcm,bcm58305", "brcm,cygnus"; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index fc44634..b2aacbe 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -227,6 +227,15 @@ nodes to be present and contain the properties described below. # List of phandles to idle state nodes supported by this cpu [3]. + - rockchip,pmu + Usage: optional for systems that have an "enable-method" + property value of "rockchip,rk3066-smp" + While optional, it is the preferred way to get access to + the cpu-core power-domains. + Value type: <phandle> + Definition: Specifies the syscon node controlling the cpu core + power domains. + Example 1 (dual-cluster big.LITTLE system 32-bit): cpus { diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index e935d7d..4e8b7df 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -74,3 +74,41 @@ Required root node properties: i.MX6q generic board Required root node properties: - compatible = "fsl,imx6q"; + + +Freescale LS1021A Platform Device Tree Bindings +------------------------------------------------ + +Required root node compatible properties: + - compatible = "fsl,ls1021a"; + +Freescale LS1021A SoC-specific Device Tree Bindings +------------------------------------------- + +Freescale SCFG + SCFG is the supplemental configuration unit, that provides SoC specific +configuration and status registers for the chip. Such as getting PEX port +status. + Required properties: + - compatible: should be "fsl,ls1021a-scfg" + - reg: should contain base address and length of SCFG memory-mapped registers + +Example: + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg"; + reg = <0x0 0x1570000 0x0 0x10000>; + }; + +Freescale DCFG + DCFG is the device configuration unit, that provides general purpose +configuration and status for the device. Such as setting the secondary +core start address and release the secondary core from holdoff and startup. + Required properties: + - compatible: should be "fsl,ls1021a-dcfg" + - reg : should contain base address and length of DCFG memory-mapped registers + +Example: + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1021a-dcfg"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index c7d2fa1..b38608a 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -17,6 +17,7 @@ Main node required properties: "arm,cortex-a7-gic" "arm,arm11mp-gic" "brcm,brahma-b15-gic" + "arm,arm1176jzf-devchip-gic" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The type shall be a <u32> and the value shall be 3. diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt index 904de57..a99eb9e 100644 --- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -106,11 +106,21 @@ Required subnode-properties: - groups: a list of strings describing the group names. - function: a string describing the function used to mux the groups. +* Reset controller binding + +A reset controller is part of the chip control registers set. The chip control +node also provides the reset. The register set is not at the same offset between +Berlin SoCs. + +Required property: +- #reset-cells: must be set to 2 + Example: chip: chip-control@ea0000 { compatible = "marvell,berlin2-chip-ctrl"; #clock-cells = <1>; + #reset-cells = <2>; reg = <0xea0000 0x400>; clocks = <&refclk>, <&externaldev 0>; clock-names = "refclk", "video_ext0"; diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index fa25226..3be4013 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -1,10 +1,14 @@ -Mediatek MT6589 Platforms Device Tree Bindings +MediaTek mt65xx & mt81xx Platforms Device Tree Bindings -Boards with a SoC of the Mediatek MT6589 shall have the following property: +Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property: Required root node property: -compatible: must contain "mediatek,mt6589" +compatible: Must contain one of + "mediatek,mt6589" + "mediatek,mt6592" + "mediatek,mt8127" + "mediatek,mt8135" Supported boards: @@ -12,3 +16,12 @@ Supported boards: - bq Aquaris5 smart phone: Required root node properties: - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; +- Evaluation board for MT6592: + Required root node properties: + - compatible = "mediatek,mt6592-evb", "mediatek,mt6592"; +- MTK mt8127 tablet moose EVB: + Required root node properties: + - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; +- MTK mt8135 tablet EVB: + Required root node properties: + - compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135"; diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index ddd9bcd..4f6a82c 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -132,6 +132,9 @@ Boards: - AM335X Bone : Low cost community board compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3" +- AM335X OrionLXm : Substation Automation Platform + compatible = "novatech,am335x-lxm", "ti,am33xx" + - OMAP5 EVM : Evaluation Module compatible = "ti,omap5-evm", "ti,omap5" diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 857f126..eaa3d1a 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -1,6 +1,10 @@ Rockchip platforms device tree bindings --------------------------------------- +- MarsBoard RK3066 board: + Required root node properties: + - compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; + - bq Curie 2 tablet: Required root node properties: - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt index 2168ed3..43589d2 100644 --- a/Documentation/devicetree/bindings/arm/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt @@ -1,11 +1,20 @@ -* Samsung's Exynos4210 based SMDKV310 evaluation board - -SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC. +* Samsung's Exynos SoC based boards Required root node properties: - compatible = should be one or more of the following. - (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. - (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. + - "samsung,monk" - for Exynos3250-based Samsung Simband board. + - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board. + - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board. + - "samsung,trats" - for Exynos4210-based Tizen Reference board. + - "samsung,universal_c210" - for Exynos4210-based Samsung board. + - "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board. + - "samsung,trats2" - for Exynos4412-based Tizen Reference board. + - "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board. + - "samsung,xyref5260" - for Exynos5260-based Samsung board. + - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. + - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. + - "samsung,sd5v1" - for Exynos5440-based Samsung board. + - "samsung,ssdk5440" - for Exynos5440-based Samsung board. Optional: - firmware node, specifying presence and type of secure firmware: diff --git a/Documentation/devicetree/bindings/arm/ste-nomadik.txt b/Documentation/devicetree/bindings/arm/ste-nomadik.txt index 6256ec3..2fdff5a 100644 --- a/Documentation/devicetree/bindings/arm/ste-nomadik.txt +++ b/Documentation/devicetree/bindings/arm/ste-nomadik.txt @@ -10,6 +10,12 @@ Required root node property: src Boards with the Nomadik SoC include: +Nomadik NHK-15 board manufactured by ST Microelectronics: + +Required root node property: + +compatible="st,nomadik-nhk-15"; + S8815 "MiniKit" manufactured by Calao Systems: Required root node property: diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt new file mode 100644 index 0000000..42941fd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -0,0 +1,12 @@ +Allwinner sunXi Platforms Device Tree Bindings + +Each device tree must specify which Allwinner SoC it uses, +using one of the following compatible strings: + + allwinner,sun4i-a10 + allwinner,sun5i-a10s + allwinner,sun5i-a13 + allwinner,sun6i-a31 + allwinner,sun7i-a20 + allwinner,sun8i-a23 + allwinner,sun9i-a80 diff --git a/Documentation/devicetree/bindings/arm/ux500/power_domain.txt b/Documentation/devicetree/bindings/arm/ux500/power_domain.txt new file mode 100644 index 0000000..5679d17 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ux500/power_domain.txt @@ -0,0 +1,35 @@ +* ST-Ericsson UX500 PM Domains + +UX500 supports multiple PM domains which are used to gate power to one or +more peripherals on the SOC. + +The implementation of PM domains for UX500 are based upon the generic PM domain +and use the corresponding DT bindings. + +==PM domain providers== + +Required properties: + - compatible: Must be "stericsson,ux500-pm-domains". + - #power-domain-cells : Number of cells in a power domain specifier, must be 1. + +Example: + pm_domains: pm_domains0 { + compatible = "stericsson,ux500-pm-domains"; + #power-domain-cells = <1>; + }; + +==PM domain consumers== + +Required properties: + - power-domains: A phandle and PM domain specifier. Below are the list of + valid specifiers: + + Index Specifier + ----- --------- + 0 DOMAIN_VAPE + +Example: + sdi0_per1@80126000 { + compatible = "arm,pl18x", "arm,primecell"; + power-domains = <&pm_domains DOMAIN_VAPE> + }; diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt index 1e61113..80ae87a 100644 --- a/Documentation/devicetree/bindings/ata/sata_rcar.txt +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt @@ -3,8 +3,10 @@ Required properties: - compatible : should contain one of the following: - "renesas,sata-r8a7779" for R-Car H1 - - "renesas,sata-r8a7790" for R-Car H2 - - "renesas,sata-r8a7791" for R-Car M2 + - "renesas,sata-r8a7790-es1" for R-Car H2 ES1 + - "renesas,sata-r8a7790" for R-Car H2 other than ES1 + - "renesas,sata-r8a7791" for R-Car M2-W + - "renesas,sata-r8a7793" for R-Car M2-N - reg : address and length of the SATA registers; - interrupts : must consist of one interrupt specifier. diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt index e2d501d..1eceefb 100644 --- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt @@ -2,7 +2,11 @@ Broadcom GISB bus Arbiter controller Required properties: -- compatible: should be "brcm,gisb-arb" +- compatible: + "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for 28nm chips + "brcm,bcm7435-gisb-arb" for newer 40nm chips + "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips + "brcm,bcm7038-gisb-arb" for 130nm chips - reg: specifies the base physical address and size of the registers - interrupt-parent: specifies the phandle to the parent interrupt controller this arbiter gets interrupt line from diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt index 5fa44f5..5e16c3c 100644 --- a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt +++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt @@ -48,9 +48,12 @@ Required properties: - compatible: Should be set to "marvell,mbus-controller". - reg: Device's register space. - Two entries are expected (see the examples below): - the first one controls the devices decoding window and - the second one controls the SDRAM decoding window. + Two or three entries are expected (see the examples below): + the first one controls the devices decoding window, + the second one controls the SDRAM decoding window and + the third controls the MBus bridge (only with the + marvell,armada370-mbus and marvell,armadaxp-mbus + compatible strings) Example: @@ -67,7 +70,7 @@ Example: mbusc: mbus-controller@20000 { compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; }; /* more children ...*/ @@ -126,7 +129,7 @@ are skipped. mbusc: mbus-controller@20000 { compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; }; /* more children ...*/ @@ -170,7 +173,7 @@ Using this macro, the above example would be: mbusc: mbus-controller@20000 { compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; }; /* other children */ @@ -266,7 +269,7 @@ See the example below, where a more complete device tree is shown: ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; mbusc: mbus-controller@20000 { - reg = <0x20000 0x100>, <0x20180 0x20>; + reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>; }; interrupt-controller@20000 { diff --git a/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt new file mode 100644 index 0000000..00d26ed --- /dev/null +++ b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt @@ -0,0 +1,34 @@ +Broadcom Cygnus Clocks + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +Currently various "fixed" clocks are declared for peripheral drivers that use +the common clock framework to reference their core clocks. Proper support of +these clocks will be added later + +Device tree example: + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <25000000>; + }; + + apb_clk: apb_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + }; + + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt index c80863d..63f9f1a 100644 --- a/Documentation/devicetree/bindings/clock/vf610-clock.txt +++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt @@ -5,6 +5,19 @@ Required properties: - reg: Address and length of the register set - #clock-cells: Should be <1> +Optional properties: +- clocks: list of clock identifiers which are external input clocks to the + given clock controller. Please refer the next section to find + the input clocks for a given controller. +- clock-names: list of names of clocks which are exteral input clocks to the + given clock controller. + +Input clocks for top clock controller: + - sxosc (external crystal oscillator 32KHz, recommended) + - fxosc (external crystal oscillator 24MHz, recommended) + - audio_ext + - enet_ext + The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h for the full list of VF610 clock IDs. @@ -15,6 +28,8 @@ clks: ccm@4006b000 { compatible = "fsl,vf610-ccm"; reg = <0x4006b000 0x1000>; #clock-cells = <1>; + clocks = <&sxosc>, <&fxosc>; + clock-names = "sxosc", "fxosc"; }; uart1: serial@40028000 { diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt index 1405ed0..e4c4d47 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -25,7 +25,7 @@ Required child node properties: - compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or "xlnx,axi-vdma-s2mm-channel". - interrupts: Should contain per channel VDMA interrupts. -- xlnx,data-width: Should contain the stream data width, take values +- xlnx,datawidth: Should contain the stream data width, take values {32,64...1024}. Optional child node properties: diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt new file mode 100644 index 0000000..ed2f09d --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt @@ -0,0 +1,39 @@ +ltc2978 + +Required properties: +- compatible: should contain one of: + * "lltc,ltc2974" + * "lltc,ltc2977" + * "lltc,ltc2978" + * "lltc,ltc3880" + * "lltc,ltc3883" + * "lltc,ltm4676" +- reg: I2C slave address + +Optional properties: +- regulators: A node that houses a sub-node for each regulator controlled by + the device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + +Valid names of regulators depend on number of supplies supported per device: + * ltc2974 : vout0 - vout3 + * ltc2977 : vout0 - vout7 + * ltc2978 : vout0 - vout7 + * ltc3880 : vout0 - vout1 + * ltc3883 : vout0 + * ltm4676 : vout0 - vout1 + +Example: +ltc2978@5e { + compatible = "lltc,ltc2978"; + reg = <0x5e>; + regulators { + vout0 { + regulator-name = "FPGA-2.5V"; + }; + vout2 { + regulator-name = "FPGA-1.5V"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt index 278de8e..89b3250 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt @@ -32,6 +32,7 @@ Optional properties: specified, default value is 0. - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not specified, the default value in Hz is 100000. + - samsung,sysreg-phandle - handle to syscon used to control the system registers Example: diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index fbde415..605dcca 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -56,6 +56,8 @@ gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire In infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) isl,isl12057 Intersil ISL12057 I2C RTC Chip +isil,isl29028 (deprecated, use isl) +isl,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt index ce6a1a0..8a3c408 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt @@ -30,10 +30,6 @@ should only be used when a device has multiple interrupt parents. Example: interrupts-extended = <&intc1 5 1>, <&intc2 1 0>; -A device node may contain either "interrupts" or "interrupts-extended", but not -both. If both properties are present, then the operating system should log an -error and use only the data in "interrupts". - 2) Interrupt controller nodes ----------------------------- diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-sdram-controller.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-sdram-controller.txt new file mode 100644 index 0000000..89657d1 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-sdram-controller.txt @@ -0,0 +1,21 @@ +Device Tree bindings for MVEBU SDRAM controllers + +The Marvell EBU SoCs all have a SDRAM controller. The SDRAM controller +differs from one SoC variant to another, but they also share a number +of commonalities. + +For now, this Device Tree binding documentation only documents the +Armada XP SDRAM controller. + +Required properties: + + - compatible: for Armada XP, "marvell,armada-xp-sdram-controller" + - reg: a resource specifier for the register space, which should + include all SDRAM controller registers as per the datasheet. + +Example: + +sdramc@1400 { + compatible = "marvell,armada-xp-sdram-controller"; + reg = <0x1400 0x500>; +}; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt new file mode 100644 index 0000000..f3db93c --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt @@ -0,0 +1,36 @@ +NVIDIA Tegra Memory Controller device tree bindings +=================================================== + +Required properties: +- compatible: Should be "nvidia,tegra<chip>-mc" +- reg: Physical base address and length of the controller's registers. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - mc: the module's clock input +- interrupts: The interrupt outputs from the controller. +- #iommu-cells: Should be 1. The single cell of the IOMMU specifier defines + the SWGROUP of the master. + +This device implements an IOMMU that complies with the generic IOMMU binding. +See ../iommu/iommu.txt for details. + +Example: +-------- + + mc: memory-controller@0,70019000 { + compatible = "nvidia,tegra124-mc"; + reg = <0x0 0x70019000 0x0 0x1000>; + clocks = <&tegra_car TEGRA124_CLK_MC>; + clock-names = "mc"; + + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <1>; + }; + + sdhci@0,700b0000 { + compatible = "nvidia,tegra124-sdhci"; + ... + iommus = <&mc TEGRA_SWGROUP_SDMMC1A>; + }; diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt new file mode 100644 index 0000000..f64de95a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt @@ -0,0 +1,51 @@ +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver + +Required properties: + - compatible: value should be one of the following: + "atmel,sama5d3-hlcdc" + - reg: base address and size of the HLCDC device registers. + - clock-names: the name of the 3 clocks requested by the HLCDC device. + Should contain "periph_clk", "sys_clk" and "slow_clk". + - clocks: should contain the 3 clocks requested by the HLCDC device. + - interrupts: should contain the description of the HLCDC interrupt line + +The HLCDC IP exposes two subdevices: + - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt + - a Display Controller: see ../drm/atmel-hlcdc-dc.txt + +Example: + + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index 678f3cf..75fdfaf 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -34,6 +34,12 @@ to get matched with their hardware counterparts as follow: -BUCKn : for BUCKs, where n can lie in range 1 to 9. example: BUCK1, BUCK5, BUCK9. + Regulators which can be turned off during system suspend: + -LDOn : 2, 6-8, 10-12, 14-16, + -BUCKn : 1-4. + Use standard regulator bindings for it ('regulator-off-in-suspend'). + + Example: max77686@09 { diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt index 11921cc..01e9f30 100644 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/Documentation/devicetree/bindings/mfd/max77693.txt @@ -27,6 +27,20 @@ Optional properties: [*] refer Documentation/devicetree/bindings/regulator/regulator.txt +- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide + users with tactile feedback. PWM period and duty-cycle are varied in + order to provide the approprite level of feedback. + + Required properties: + - compatible : Must be "maxim,max77693-hpatic" + - haptic-supply : power supply for the haptic motor + [*] refer Documentation/devicetree/bindings/regulator/regulator.txt + - pwms : phandle to the physical PWM(Pulse Width Modulation) device. + PWM properties should be named "pwms". And number of cell is different + for each pwm device. + To get more informations, please refer to documentaion. + [*] refer Documentation/devicetree/bindings/pwm/pwm.txt + Example: max77693@66 { compatible = "maxim,max77693"; @@ -52,4 +66,11 @@ Example: regulator-boot-on; }; }; + + haptic { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&haptic_supply>; + pwms = <&pwm 0 40000 0>; + pwm-names = "haptic"; + }; }; diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 0e4026a..57a0450 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -1,5 +1,5 @@ -* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator +* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator The Samsung S2MPS11 is a multi-function device which includes voltage and current regulators, RTC, charger controller and other sub-blocks. It is @@ -7,8 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is addressed by the host system using different I2C slave addresses. Required properties: -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic" - or "samsung,s2mpu02-pmic". +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic" + or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: @@ -17,8 +17,8 @@ Optional properties: - interrupts: Interrupt specifiers for interrupt sources. Optional nodes: -- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz - outputs, so to register these as clocks with common clock framework +- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768 + KHz outputs, so to register these as clocks with common clock framework instantiate a sub-node named "clocks". It uses the common clock binding documented in : [Documentation/devicetree/bindings/clock/clock-bindings.txt] @@ -30,12 +30,12 @@ Optional nodes: the clock which they consume. Clock ID Devices ---------------------------------------------------------- - 32KhzAP 0 S2MPS11, S2MPS14, S5M8767 - 32KhzCP 1 S2MPS11, S5M8767 - 32KhzBT 2 S2MPS11, S2MPS14, S5M8767 + 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767 + 32KhzCP 1 S2MPS11, S2MPS13, S5M8767 + 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767 - - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk", - "samsung,s5m8767-clk" + - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", + "samsung,s2mps14-clk", "samsung,s5m8767-clk" - regulators: The regulators of s2mps11 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this @@ -81,12 +81,14 @@ as per the datasheet of s2mps11. - LDOn - valid values for n are: - S2MPS11: 1 to 38 + - S2MPS13: 1 to 40 - S2MPS14: 1 to 25 - S2MPU02: 1 to 28 - Example: LDO1, LDO2, LDO28 - BUCKn - valid values for n are: - S2MPS11: 1 to 10 + - S2MPS13: 1 to 10 - S2MPS14: 1 to 5 - S2MPU02: 1 to 7 - Example: BUCK1, BUCK2, BUCK9 diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index 6cd3525..ee4fc05 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -18,6 +18,10 @@ Required Properties: specific extensions. - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 specific extensions. + - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7 + specific extensions. + - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7 + specific extensions having an SMU. * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface unit (ciu) clock. This property is applicable only for Exynos5 SoC's and diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt new file mode 100644 index 0000000..85de99f --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt @@ -0,0 +1,29 @@ +* Imagination specific extensions to the Synopsys Designware Mobile Storage + Host Controller + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Imagination specific +extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - "img,pistachio-dw-mshc": for Pistachio SoCs + +Example: + + mmc@18142000 { + compatible = "img,pistachio-dw-mshc"; + reg = <0x18142000 0x400>; + interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&system_clk>, <&sdhost_clk>; + clock-names = "biu", "ciu"; + + fifo-depth = <0x20>; + bus-width = <4>; + num-slots = <1>; + disable-wp; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt index 86223c3..4dd6deb 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt @@ -12,6 +12,10 @@ Required properties: * for "marvell,armada-380-sdhci", two register areas. The first one for the SDHCI registers themselves, and the second one for the AXI/Mbus bridge registers of the SDHCI unit. +- clocks: Array of clocks required for SDHCI; requires at least one for + I/O clock. +- clock-names: Array of names corresponding to clocks property; shall be + "io" for I/O clock and "core" for optional core clock. Optional properties: - mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning. @@ -23,6 +27,8 @@ sdhci@d4280800 { reg = <0xd4280800 0x800>; bus-width = <8>; interrupts = <27>; + clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>; + clock-names = "io", "core"; non-removable; mrvl,clk-delay-cycles = <31>; }; @@ -32,5 +38,6 @@ sdhci@d8000 { reg = <0xd8000 0x1000>, <0xdc000 0x100>; interrupts = <0 25 0x4>; clocks = <&gateclk 17>; + clock-names = "io"; mrvl,clk-delay-cycles = <0x1F>; }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt index 0f8487b8..e77e167 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt @@ -11,3 +11,5 @@ Optional properties: are supported on the device. Valid value for SMSC LAN91c111 are 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning 16-bit access only. +- power-gpios: GPIO to control the PWRDWN pin +- reset-gpios: GPIO to control the RESET pin diff --git a/Documentation/devicetree/bindings/nios2/nios2.txt b/Documentation/devicetree/bindings/nios2/nios2.txt new file mode 100644 index 0000000..d6d0a94 --- /dev/null +++ b/Documentation/devicetree/bindings/nios2/nios2.txt @@ -0,0 +1,62 @@ +* Nios II Processor Binding + +This binding specifies what properties available in the device tree +representation of a Nios II Processor Core. + +Users can use sopc2dts tool for generating device tree sources (dts) from a +Qsys system. See more detail in: http://www.alterawiki.com/wiki/Sopc2dts + +Required properties: + +- compatible: Compatible property value should be "altr,nios2-1.0". +- reg: Contains CPU index. +- interrupt-controller: Specifies that the node is an interrupt controller +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source, should be 1. +- clock-frequency: Contains the clock frequency for CPU, in Hz. +- dcache-line-size: Contains data cache line size. +- icache-line-size: Contains instruction line size. +- dcache-size: Contains data cache size. +- icache-size: Contains instruction cache size. +- altr,pid-num-bits: Specifies the number of bits to use to represent the process + identifier (PID). +- altr,tlb-num-ways: Specifies the number of set-associativity ways in the TLB. +- altr,tlb-num-entries: Specifies the number of entries in the TLB. +- altr,tlb-ptr-sz: Specifies size of TLB pointer. +- altr,has-mul: Specifies CPU hardware multipy support, should be 1. +- altr,has-mmu: Specifies CPU support MMU support, should be 1. +- altr,has-initda: Specifies CPU support initda instruction, should be 1. +- altr,reset-addr: Specifies CPU reset address +- altr,fast-tlb-miss-addr: Specifies CPU fast TLB miss exception address +- altr,exception-addr: Specifies CPU exception address + +Optional properties: +- altr,has-div: Specifies CPU hardware divide support +- altr,implementation: Nios II core implementation, this should be "fast"; + +Example: + +cpu@0x0 { + device_type = "cpu"; + compatible = "altr,nios2-1.0"; + reg = <0>; + interrupt-controller; + #interrupt-cells = <1>; + clock-frequency = <125000000>; + dcache-line-size = <32>; + icache-line-size = <32>; + dcache-size = <32768>; + icache-size = <32768>; + altr,implementation = "fast"; + altr,pid-num-bits = <8>; + altr,tlb-num-ways = <16>; + altr,tlb-num-entries = <128>; + altr,tlb-ptr-sz = <7>; + altr,has-div = <1>; + altr,has-mul = <1>; + altr,reset-addr = <0xc2800000>; + altr,fast-tlb-miss-addr = <0xc7fff400>; + altr,exception-addr = <0xd0000020>; + altr,has-initda = <1>; + altr,has-mmu = <1>; +}; diff --git a/Documentation/devicetree/bindings/nios2/timer.txt b/Documentation/devicetree/bindings/nios2/timer.txt new file mode 100644 index 0000000..904a584 --- /dev/null +++ b/Documentation/devicetree/bindings/nios2/timer.txt @@ -0,0 +1,19 @@ +Altera Timer + +Required properties: + +- compatible : should be "altr,timer-1.0" +- reg : Specifies base physical address and size of the registers. +- interrupt-parent: phandle of the interrupt controller +- interrupts : Should contain the timer interrupt number +- clock-frequency : The frequency of the clock that drives the counter, in Hz. + +Example: + +timer { + compatible = "altr,timer-1.0"; + reg = <0x00400000 0x00000020>; + interrupt-parent = <&cpu>; + interrupts = <11>; + clock-frequency = <125000000>; +}; diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt index 41aeed3..f8fbe9a 100644 --- a/Documentation/devicetree/bindings/pci/pci.txt +++ b/Documentation/devicetree/bindings/pci/pci.txt @@ -7,3 +7,14 @@ And for the interrupt mapping part: Open Firmware Recommended Practice: Interrupt Mapping http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf + +Additionally to the properties specified in the above standards a host bridge +driver implementation may support the following properties: + +- linux,pci-domain: + If present this property assigns a fixed PCI domain number to a host bridge, + otherwise an unstable (across boots) unique number will be assigned. + It is required to either not set this property at all or set it for all + host bridges in the system, otherwise potentially conflicting domain numbers + may be assigned to root buses behind different host bridges. The domain + number for each host bridge in the system must be unique. diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt index a186181..51b943c 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt @@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -TZ1090-PDC's pin configuration nodes act as a container for an abitrary number +TZ1090-PDC's pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those pin(s)/group(s), and various pin configuration diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt index 4b27c99..49d0e60 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt @@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -TZ1090's pin configuration nodes act as a container for an abitrary number of +TZ1090's pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those pin(s)/group(s), and various pin configuration diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt index daa7689..ac4da9f 100644 --- a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt @@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -Lantiq's pin configuration nodes act as a container for an abitrary number of +Lantiq's pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those group(s), and two pin configuration parameters: diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt index b5469db..e89b467 100644 --- a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt @@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -Lantiq's pin configuration nodes act as a container for an abitrary number of +Lantiq's pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those group(s), and two pin configuration parameters: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt index 61e73cd..3c8ce28 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt @@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -Tegra's pin configuration nodes act as a container for an abitrary number of +Tegra's pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those pin(s)/group(s), and various pin configuration diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt index c596a6a..5f55be5 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt @@ -13,7 +13,7 @@ Optional properties: Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices. -SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes. +SiRFprimaII's pinmux nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a group of pins. Required subnode-properties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt index b4480d5..4586155 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt @@ -32,7 +32,7 @@ Required properties: Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices. -SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each +SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents muxing for a pin, a group, or a list of pins or groups. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt index 2fb90b3..a7bde64 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt @@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -Qualcomm's pin configuration nodes act as a container for an abitrary number of +Qualcomm's pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those pin(s)/group(s), and various pin configuration diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt index ffafa19..c4ea61a 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt @@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -The pin configuration nodes act as a container for an abitrary number of +The pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those pin(s)/group(s), and various pin configuration diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt index e33e4dc..6e88e91 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt @@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -Qualcomm's pin configuration nodes act as a container for an abitrary number of +Qualcomm's pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those pin(s)/group(s), and various pin configuration diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt index 93b7de9..eb8d8aa 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt @@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -The pin configuration nodes act as a container for an abitrary number of +The pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those pin(s)/group(s), and various pin configuration diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt index d2ea80d..e4d6a9d 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt @@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the phrase "pin configuration node". -Qualcomm's pin configuration nodes act as a container for an abitrary number of +Qualcomm's pin configuration nodes act as a container for an arbitrary number of subnodes. Each of these subnodes represents some desired configuration for a pin, a group, or a list of pins or groups. This configuration can include the mux function to select on those pin(s)/group(s), and various pin configuration diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt new file mode 100644 index 0000000..4f7a3bc --- /dev/null +++ b/Documentation/devicetree/bindings/power/power-controller.txt @@ -0,0 +1,18 @@ +* Generic system power control capability + +Power-management integrated circuits or miscellaneous hardware components are +sometimes able to control the system power. The device driver associated with these +components might need to define this capability, which tells the kernel that +it can be used to switch off the system. The corresponding device must have the +standard property "system-power-controller" in its device node. This property +marks the device as able to control the system power. In order to test if this +property is found programmatically, use the helper function +"of_device_is_system_power_controller" from of.h . + +Example: + +act8846: act8846@5 { + compatible = "active-semi,act8846"; + status = "okay"; + system-power-controller; +} diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt new file mode 100644 index 0000000..dc7c9ba --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt @@ -0,0 +1,23 @@ +i.mx6 Poweroff Driver + +SNVS_LPCR in SNVS module can power off the whole system by pull +PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC. +If you don't want to use PMIC_ON_REQ as power on/off control, +please set status='disabled' to disable this driver. + +Required Properties: +-compatible: "fsl,sec-v4.0-poweroff" +-reg: Specifies the physical address of the SNVS_LPCR register + +Example: + snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + ..... + snvs_poweroff: snvs-poweroff@38 { + compatible = "fsl,sec-v4.0-poweroff"; + reg = <0x38 0x4>; + }; + } diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index 865614b..dad6358 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -5,6 +5,10 @@ Required properties: - compatible: "active-semi,act8846" or "active-semi,act8865" - reg: I2C slave address +Optional properties: +- system-power-controller: Telling whether or not this pmic is controlling + the system power. See Documentation/devicetree/bindings/power/power-controller.txt . + Any standard regulator properties can be used to configure the single regulator. The valid names for regulators are: diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 5aeaffc..79e5476 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -25,6 +25,29 @@ with their hardware counterparts as follow. The valid names are: example: LDO1, LDO2, LDO35. -BUCKn : for BUCKs, where n can lie in range 1 to 10. example: BUCK1, BUCK5, BUCK10. + +The max77802 regulator supports two different operating modes: Normal and Low +Power Mode. Some regulators support the modes to be changed at startup or by +the consumers during normal operation while others only support to change the +mode during system suspend. The standard regulator suspend states binding can +be used to configure the regulator operating mode. + +The regulators that support the standard "regulator-initial-mode" property, +changing their mode during normal operation are: LDOs 1, 3, 20 and 21. + +The possible values for "regulator-initial-mode" and "regulator-mode" are: + 1: Normal regulator voltage output mode. + 3: Low Power which reduces the quiescent current down to only 1uA + +The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h +header and can be included by device tree source files. + +The standard "regulator-mode" property can only be used for regulators that +support changing their mode to Low Power Mode during suspend. These regulators +are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has +been enabled for the given suspend state using "regulator-on-in-suspend" and +has not been disabled for that state using "regulator-off-in-suspend". + Example: max77802@09 { @@ -36,11 +59,23 @@ Example: #size-cells = <0>; regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-initial-mode = <MAX77802_OPMODE_LP>; + }; + ldo11_reg: LDO11 { regulator-name = "vdd_ldo11"; regulator-min-microvolt = <1900000>; regulator-max-microvolt = <1900000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; buck1_reg: BUCK1 { diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 8607433..abb26b5 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -19,6 +19,24 @@ Optional properties: design requires. This property describes the total system ramp time required due to the combination of internal ramping of the regulator itself, and board design issues such as trace capacitance and load on the supply. +- regulator-state-mem sub-root node for Suspend-to-RAM mode + : suspend to memory, the device goes to sleep, but all data stored in memory, + only some external interrupt can wake the device. +- regulator-state-disk sub-root node for Suspend-to-DISK mode + : suspend to disk, this state operates similarly to Suspend-to-RAM, + but includes a final step of writing memory contents to disk. +- regulator-state-[mem/disk] node has following common properties: + - regulator-on-in-suspend: regulator should be on in suspend state. + - regulator-off-in-suspend: regulator should be off in suspend state. + - regulator-suspend-microvolt: regulator should be set to this voltage + in suspend. + - regulator-mode: operating mode in the given suspend state. + The set of possible operating modes depends on the capabilities of + every hardware so the valid modes are documented on each regulator + device tree binding document. +- regulator-initial-mode: initial operating mode. The set of possible operating + modes depends on the capabilities of every hardware so each device binding + documentation explains which values the regulator supports. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple @@ -34,6 +52,10 @@ Example: regulator-max-microvolt = <2500000>; regulator-always-on; vin-supply = <&vin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; Regulator Consumers: diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt index 882455e..f9acbc1 100644 --- a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt @@ -1,6 +1,7 @@ SKY81452 voltage regulator Required properties: +- regulator node named lout. - any required generic properties defined in regulator.txt Optional properties: @@ -9,8 +10,9 @@ Optional properties: Example: regulator { - /* generic regulator properties */ - regulator-name = "touch_en"; - regulator-min-microvolt = <4500000>; - regulator-max-microvolt = <8000000>; + lout { + regulator-name = "sky81452-lout"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <8000000>; + }; }; diff --git a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt new file mode 100644 index 0000000..54ae9f7 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt @@ -0,0 +1,42 @@ +STMicroelectronics STi family Sysconfig Picophy SoftReset Controller +============================================================================= + +This binding describes a reset controller device that is used to enable and +disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in +the STi family SoC system configuration registers. + +The actual action taken when softreset is asserted is hardware dependent. +However, when asserted it may not be possible to access the hardware's +registers and after an assert/deassert sequence the hardware's previous state +may no longer be valid. + +Please refer to Documentation/devicetree/bindings/reset/reset.txt +for common reset controller binding usage. + +Required properties: +- compatible: Should be "st,stih407-picophyreset" +- #reset-cells: 1, see below + +Example: + + picophyreset: picophyreset-controller { + compatible = "st,stih407-picophyreset"; + #reset-cells = <1>; + }; + +Specifying picophyreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the picophyreset device node and an +index specifying which channel to use, as described in +Documentation/devicetree/bindings/reset/reset.txt. + +Example: + + usb2_picophy0: usbpicophy@0 { + resets = <&picophyreset STIH407_PICOPHY0_RESET>; + }; + +Macro definitions for the supported reset channels can be found in: +include/dt-bindings/reset-controller/stih407-resets.h diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt new file mode 100644 index 0000000..6ae79d1 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt @@ -0,0 +1,23 @@ +Atmel AT91SAM9260 Real Time Timer + +Required properties: +- compatible: should be: "atmel,at91sam9260-rtt" +- reg: should encode the memory region of the RTT controller +- interrupts: rtt alarm/event interrupt +- clocks: should contain the 32 KHz slow clk that will drive the RTT block. +- atmel,rtt-rtc-time-reg: should encode the GPBR register used to store + the time base when the RTT is used as an RTC. + The first cell should point to the GPBR node and the second one + encode the offset within the GPBR block (or in other words, the + GPBR register used to store the time base). + + +Example: + +rtt@fffffd20 { + compatible = "atmel,at91sam9260-rtt"; + reg = <0xfffffd20 0x10>; + interrupts = <1 4 7>; + clocks = <&clk32k>; + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; +}; diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 955df60..d556dcb 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -7,10 +7,20 @@ Required properties: - clocks : the clock provider of SYS_MCLK +- VDDA-supply : the regulator provider of VDDA + +- VDDIO-supply: the regulator provider of VDDIO + +Optional properties: + +- VDDD-supply : the regulator provider of VDDD + Example: codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 150>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; }; diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt index 042a027..b7ba01a 100644 --- a/Documentation/devicetree/bindings/submitting-patches.txt +++ b/Documentation/devicetree/bindings/submitting-patches.txt @@ -12,6 +12,9 @@ I. For patch submitters devicetree@vger.kernel.org + 3) The Documentation/ portion of the patch should come in the series before + the code implementing the binding. + II. For kernel maintainers 1) If you aren't comfortable reviewing a given binding, reply to it and ask diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index 0ef00be..43404b1 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -7,7 +7,10 @@ Required properties: - "renesas,thermal-r8a73a4" (R-Mobile AP6) - "renesas,thermal-r8a7779" (R-Car H1) - "renesas,thermal-r8a7790" (R-Car H2) - - "renesas,thermal-r8a7791" (R-Car M2) + - "renesas,thermal-r8a7791" (R-Car M2-W) + - "renesas,thermal-r8a7792" (R-Car V2H) + - "renesas,thermal-r8a7793" (R-Car M2-N) + - "renesas,thermal-r8a7794" (R-Car E2) - reg : Address range of the thermal registers. The 1st reg will be recognized as common register if it has "interrupts". diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt index d9a8d5a..ba0a34d 100644 --- a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt +++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt @@ -1,4 +1,4 @@ -* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2) +* Renesas Multi-Function Timer Pulse Unit 2 (MTU2) The MTU2 is a multi-purpose, multi-channel timer/counter with configurable clock inputs and programmable compare match. diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt index 7db89fb..cd5f20b 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt @@ -1,4 +1,4 @@ -* Renesas R-Car Timer Unit (TMU) +* Renesas R-Mobile/R-Car Timer Unit (TMU) The TMU is a 32-bit timer/counter with configurable clock inputs and programmable compare match. @@ -9,6 +9,8 @@ are independent. The TMU hardware supports up to three channels. Required Properties: - compatible: must contain one or more of the following: + - "renesas,tmu-r8a7740" for the r8a7740 TMU + - "renesas,tmu-r8a7778" for the r8a7778 TMU - "renesas,tmu-r8a7779" for the r8a7779 TMU - "renesas,tmu" for any TMU. This is a fallback for the above renesas,tmu-* entries diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 723999d..0d35462 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -34,12 +34,14 @@ chipidea Chipidea, Inc chrp Common Hardware Reference Platform chunghwa Chunghwa Picture Tubes Ltd. cirrus Cirrus Logic, Inc. +cnm Chips&Media, Inc. cortina Cortina Systems, Inc. crystalfontz Crystalfontz America, Inc. dallas Maxim Integrated Products (formerly Dallas Semiconductor) davicom DAVICOM Semiconductor, Inc. denx Denx Software Engineering digi Digi International Inc. +digilent Diglent, Inc. dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG @@ -77,6 +79,7 @@ innolux Innolux Corporation intel Intel Corporation intercontrol Inter Control Group isee ISEE 2007 S.L. +isil Intersil (deprecated, use isl) isl Intersil karo Ka-Ro electronics GmbH keymile Keymile GmbH @@ -90,8 +93,10 @@ lltc Linear Technology Corporation marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products mediatek MediaTek Inc. +merrii Merrii Technology Co., Ltd. micrel Micrel Inc. microchip Microchip Technology Inc. +micron Micron Technology Inc. mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. moxa Moxa @@ -127,6 +132,7 @@ renesas Renesas Electronics Corporation ricoh Ricoh Co. Ltd. rockchip Fuzhou Rockchip Electronics Co., Ltd samsung Samsung Semiconductor +sandisk Sandisk Corporation sbs Smart Battery System schindler Schindler seagate Seagate Technology PLC @@ -138,7 +144,7 @@ silergy Silergy Corp. sirf SiRF Technology, Inc. sitronix Sitronix Technology Corporation smsc Standard Microsystems Corporation -snps Synopsys, Inc. +snps Synopsys, Inc. solidrun SolidRun sony Sony Corporation spansion Spansion Inc. @@ -146,6 +152,7 @@ st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson synology Synology, Inc. +tbs TBS Technologies thine THine Electronics, Inc. ti Texas Instruments tlm Trusted Logic Mobility diff --git a/Documentation/devicetree/bindings/w1/omap-hdq.txt b/Documentation/devicetree/bindings/w1/omap-hdq.txt new file mode 100644 index 0000000..fef7947 --- /dev/null +++ b/Documentation/devicetree/bindings/w1/omap-hdq.txt @@ -0,0 +1,17 @@ +* OMAP HDQ One wire bus master controller + +Required properties: +- compatible : should be "ti,omap3-1w" +- reg : Address and length of the register set for the device +- interrupts : interrupt line. +- ti,hwmods : "hdq1w" + +Example: + +- From omap3.dtsi + hdqw1w: 1w@480b2000 { + compatible = "ti,omap3-1w"; + reg = <0x480b2000 0x1000>; + interrupts = <58>; + ti,hwmods = "hdq1w"; + }; diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt index 530850a..a27c950 100644 --- a/Documentation/filesystems/overlayfs.txt +++ b/Documentation/filesystems/overlayfs.txt @@ -64,7 +64,7 @@ is formed. At mount time, the two directories given as mount options "lowerdir" and "upperdir" are combined into a merged directory: - mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper,\ + mount -t overlay overlay -olowerdir=/lower,upperdir=/upper,\ workdir=/work /merged The "workdir" needs to be an empty directory on the same filesystem diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75 index c6a5ff1..67691a0a 100644 --- a/Documentation/hwmon/lm75 +++ b/Documentation/hwmon/lm75 @@ -53,6 +53,11 @@ Supported chips: http://www.ti.com/product/tmp75 http://www.ti.com/product/tmp175 http://www.ti.com/product/tmp275 + * NXP LM75B + Prefix: 'lm75b' + Addresses scanned: none + Datasheet: Publicly available at the NXP website + http://www.nxp.com/documents/data_sheet/LM75B.pdf Author: Frodo Looijaard <frodol@dds.nl> diff --git a/Documentation/hwmon/lm95234 b/Documentation/hwmon/lm95234 index a0e95dd..32b777e 100644 --- a/Documentation/hwmon/lm95234 +++ b/Documentation/hwmon/lm95234 @@ -2,6 +2,10 @@ Kernel driver lm95234 ===================== Supported chips: + * National Semiconductor / Texas Instruments LM95233 + Addresses scanned: I2C 0x18, 0x2a, 0x2b + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/product/lm95233 * National Semiconductor / Texas Instruments LM95234 Addresses scanned: I2C 0x18, 0x4d, 0x4e Datasheet: Publicly available at the Texas Instruments website @@ -13,11 +17,12 @@ Author: Guenter Roeck <linux@roeck-us.net> Description ----------- -LM95234 is an 11-bit digital temperature sensor with a 2-wire System Management -Bus (SMBus) interface and TrueTherm technology that can very accurately monitor -the temperature of four remote diodes as well as its own temperature. -The four remote diodes can be external devices such as microprocessors, -graphics processors or diode-connected 2N3904s. The LM95234's TruTherm +LM95233 and LM95234 are 11-bit digital temperature sensors with a 2-wire +System Management Bus (SMBus) interface and TrueTherm technology +that can very accurately monitor the temperature of two (LM95233) +or four (LM95234) remote diodes as well as its own temperature. +The remote diodes can be external devices such as microprocessors, +graphics processors or diode-connected 2N3904s. The chip's TruTherm beta compensation technology allows sensing of 90 nm or 65 nm process thermal diodes accurately. diff --git a/Documentation/hwmon/lm95245 b/Documentation/hwmon/lm95245 index 77eaf28..d755901 100644 --- a/Documentation/hwmon/lm95245 +++ b/Documentation/hwmon/lm95245 @@ -2,10 +2,14 @@ Kernel driver lm95245 ================== Supported chips: - * National Semiconductor LM95245 + * TI LM95235 + Addresses scanned: I2C 0x18, 0x29, 0x4c + Datasheet: Publicly available at the TI website + http://www.ti.com/lit/ds/symlink/lm95235.pdf + * TI / National Semiconductor LM95245 Addresses scanned: I2C 0x18, 0x19, 0x29, 0x4c, 0x4d - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/mpf/LM/LM95245.html + Datasheet: Publicly available at the TI website + http://www.ti.com/lit/ds/symlink/lm95245.pdf Author: Alexander Stein <alexander.stein@systec-electronic.com> @@ -13,10 +17,10 @@ Author: Alexander Stein <alexander.stein@systec-electronic.com> Description ----------- -The LM95245 is an 11-bit digital temperature sensor with a 2-wire System +LM95235 and LM95245 are 11-bit digital temperature sensors with a 2-wire System Management Bus (SMBus) interface and TruTherm technology that can monitor the temperature of a remote diode as well as its own temperature. -The LM95245 can be used to very accurately monitor the temperature of +The chips can be used to very accurately monitor the temperature of external devices such as microprocessors. All temperature values are given in millidegrees Celsius. Local temperature diff --git a/Documentation/hwmon/nct6775 b/Documentation/hwmon/nct6775 index 4e9ef60..f0dd3d2 100644 --- a/Documentation/hwmon/nct6775 +++ b/Documentation/hwmon/nct6775 @@ -8,11 +8,15 @@ Kernel driver NCT6775 ===================== Supported chips: + * Nuvoton NCT6102D/NCT6104D/NCT6106D + Prefix: 'nct6106' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from the Nuvoton web site * Nuvoton NCT5572D/NCT6771F/NCT6772F/NCT6775F/W83677HG-I Prefix: 'nct6775' Addresses scanned: ISA address retrieved from Super I/O registers Datasheet: Available from Nuvoton upon request - * Nuvoton NCT5577D/NCT6776D/NCT6776F + * Nuvoton NCT5573D/NCT5577D/NCT6776D/NCT6776F Prefix: 'nct6776' Addresses scanned: ISA address retrieved from Super I/O registers Datasheet: Available from Nuvoton upon request @@ -20,6 +24,14 @@ Supported chips: Prefix: 'nct6779' Addresses scanned: ISA address retrieved from Super I/O registers Datasheet: Available from Nuvoton upon request + * Nuvoton NCT6791D + Prefix: 'nct6791' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + * Nuvoton NCT6792D + Prefix: 'nct6792' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request Authors: Guenter Roeck <linux@roeck-us.net> diff --git a/Documentation/hwmon/nct7802 b/Documentation/hwmon/nct7802 new file mode 100644 index 0000000..2e00f5e --- /dev/null +++ b/Documentation/hwmon/nct7802 @@ -0,0 +1,32 @@ +Kernel driver nct7802 +===================== + +Supported chips: + * Nuvoton NCT7802Y + Prefix: 'nct7802' + Addresses scanned: I2C 0x28..0x2f + Datasheet: Available from Nuvoton web site + +Authors: + Guenter Roeck <linux@roeck-us.net> + +Description +----------- + +This driver implements support for the Nuvoton NCT7802Y hardware monitoring +chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan +speed sensors. + +The chip also supports intelligent fan speed control. This functionality is +not currently supported by the driver. + +Tested Boards and BIOS Versions +------------------------------- + +The driver has been reported to work with the following boards and +BIOS versions. + +Board BIOS version +--------------------------------------------------------------- +Kontron COMe-bSC2 CHR2E934.001.GGO +Kontron COMe-bIP2 CCR2E212 diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401 index f91e3fa..8eb88e9 100644 --- a/Documentation/hwmon/tmp401 +++ b/Documentation/hwmon/tmp401 @@ -18,6 +18,10 @@ Supported chips: Prefix: 'tmp432' Addresses scanned: I2C 0x4c, 0x4d Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html + * Texas Instruments TMP435 + Prefix: 'tmp435' + Addresses scanned: I2C 0x37, 0x48 - 0x4f + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html Authors: Hans de Goede <hdegoede@redhat.com> @@ -27,8 +31,8 @@ Description ----------- This driver implements support for Texas Instruments TMP401, TMP411, -TMP431, and TMP432 chips. These chips implement one or two remote and -one local temperature sensors. Temperature is measured in degrees +TMP431, TMP432 and TMP435 chips. These chips implement one or two remote +and one local temperature sensors. Temperature is measured in degrees Celsius. Resolution of the remote sensor is 0.0625 degree. Local sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not supported by the driver so far, so using the default resolution of 0.5 diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt index e1ae127..1ec0db7 100644 --- a/Documentation/input/elantech.txt +++ b/Documentation/input/elantech.txt @@ -38,22 +38,38 @@ Contents 7.2.1 Status packet 7.2.2 Head packet 7.2.3 Motion packet + 8. Trackpoint (for Hardware version 3 and 4) + 8.1 Registers + 8.2 Native relative mode 6 byte packet format + 8.2.1 Status Packet 1. Introduction ~~~~~~~~~~~~ -Currently the Linux Elantech touchpad driver is aware of two different -hardware versions unimaginatively called version 1 and version 2. Version 1 -is found in "older" laptops and uses 4 bytes per packet. Version 2 seems to -be introduced with the EeePC and uses 6 bytes per packet, and provides -additional features such as position of two fingers, and width of the touch. +Currently the Linux Elantech touchpad driver is aware of four different +hardware versions unimaginatively called version 1,version 2, version 3 +and version 4. Version 1 is found in "older" laptops and uses 4 bytes per +packet. Version 2 seems to be introduced with the EeePC and uses 6 bytes +per packet, and provides additional features such as position of two fingers, +and width of the touch. Hardware version 3 uses 6 bytes per packet (and +for 2 fingers the concatenation of two 6 bytes packets) and allows tracking +of up to 3 fingers. Hardware version 4 uses 6 bytes per packet, and can +combine a status packet with multiple head or motion packets. Hardware version +4 allows tracking up to 5 fingers. + +Some Hardware version 3 and version 4 also have a trackpoint which uses a +separate packet format. It is also 6 bytes per packet. The driver tries to support both hardware versions and should be compatible with the Xorg Synaptics touchpad driver and its graphical configuration utilities. +Note that a mouse button is also associated with either the touchpad or the +trackpoint when a trackpoint is available. Disabling the Touchpad in xorg +(TouchPadOff=0) will also disable the buttons associated with the touchpad. + Additionally the operation of the touchpad can be altered by adjusting the contents of some of its internal registers. These registers are represented by the driver as sysfs entries under /sys/bus/serio/drivers/psmouse/serio? @@ -78,7 +94,7 @@ completeness sake. 2. Extra knobs ~~~~~~~~~~~ -Currently the Linux Elantech touchpad driver provides two extra knobs under +Currently the Linux Elantech touchpad driver provides three extra knobs under /sys/bus/serio/drivers/psmouse/serio? for the user. * debug @@ -112,6 +128,20 @@ Currently the Linux Elantech touchpad driver provides two extra knobs under data consistency checking can be done. For now checking is disabled by default. Currently even turning it on will do nothing. +* crc_enabled + + Sets crc_enabled to 0/1. The name "crc_enabled" is the official name of + this integrity check, even though it is not an actual cyclic redundancy + check. + + Depending on the state of crc_enabled, certain basic data integrity + verification is done by the driver on hardware version 3 and 4. The + driver will reject any packet that appears corrupted. Using this knob, + The state of crc_enabled can be altered with this knob. + + Reading the crc_enabled value will show the active value. Echoing + "0" or "1" to this file will set the state to "0" or "1". + ///////////////////////////////////////////////////////////////////////////// 3. Differentiating hardware versions @@ -746,3 +776,42 @@ byte 5: byte 0 ~ 2 for one finger byte 3 ~ 5 for another + + +8. Trackpoint (for Hardware version 3 and 4) + ========================================= +8.1 Registers + ~~~~~~~~~ +No special registers have been identified. + +8.2 Native relative mode 6 byte packet format + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +8.2.1 Status Packet + ~~~~~~~~~~~~~ + +byte 0: + bit 7 6 5 4 3 2 1 0 + 0 0 sx sy 0 M R L +byte 1: + bit 7 6 5 4 3 2 1 0 + ~sx 0 0 0 0 0 0 0 +byte 2: + bit 7 6 5 4 3 2 1 0 + ~sy 0 0 0 0 0 0 0 +byte 3: + bit 7 6 5 4 3 2 1 0 + 0 0 ~sy ~sx 0 1 1 0 +byte 4: + bit 7 6 5 4 3 2 1 0 + x7 x6 x5 x4 x3 x2 x1 x0 +byte 5: + bit 7 6 5 4 3 2 1 0 + y7 y6 y5 y4 y3 y2 y1 y0 + + + x and y are written in two's complement spread + over 9 bits with sx/sy the relative top bit and + x7..x0 and y7..y0 the lower bits. + ~sx is the inverse of sx, ~sy is the inverse of sy. + The sign of y is opposite to what the input driver + expects for a relative movement diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 74339c5..838f377 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1264,7 +1264,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. i8042.noloop [HW] Disable the AUX Loopback command while probing for the AUX port i8042.nomux [HW] Don't check presence of an active multiplexing - controller. Default: true. + controller i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX controllers i8042.notimeout [HW] Ignore timeout condition signalled by controller @@ -1307,6 +1307,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted. .cdrom .chs .ignore_cable are additional options See Documentation/ide/ide.txt. + ide-generic.probe-mask= [HW] (E)IDE subsystem + Format: <int> + Probe mask for legacy ISA IDE ports. Depending on + platform up to 6 ports are supported, enabled by + setting corresponding bits in the mask to 1. The + default value is 0x0, which has a special meaning. + On systems that have PCI, it triggers scanning the + PCI bus for the first and the second port, which + are then probed. On systems without PCI the value + of 0x0 enables probing the two first ports as if it + was 0x3. + ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem Claim all unknown PCI IDE storage controllers. @@ -1587,6 +1599,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. kmemleak= [KNL] Boot-time kmemleak enable/disable Valid arguments: on, off Default: on + Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y, + the default is off. kmemcheck= [X86] Boot-time kmemcheck enable/disable/one-shot mode Valid arguments: 0, 1, 2 @@ -2926,6 +2940,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. quiescent states. Units are jiffies, minimum value is one, and maximum value is HZ. + rcutree.kthread_prio= [KNL,BOOT] + Set the SCHED_FIFO priority of the RCU + per-CPU kthreads (rcuc/N). This value is also + used for the priority of the RCU boost threads + (rcub/N). Valid values are 1-99 and the default + is 1 (the least-favored priority). + rcutree.rcu_nocb_leader_stride= [KNL] Set the number of NOCB kthread groups, which defaults to the square root of the number of @@ -3075,6 +3096,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. messages. Disable with a value less than or equal to zero. + rcupdate.rcu_self_test= [KNL] + Run the RCU early boot self tests + + rcupdate.rcu_self_test_bh= [KNL] + Run the RCU bh early boot self tests + + rcupdate.rcu_self_test_sched= [KNL] + Run the RCU sched early boot self tests + rdinit= [KNL] Format: <full_path> Run specified binary instead of /init from the ramdisk, @@ -3607,7 +3637,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. usb-storage.delay_use= [UMS] The delay in seconds before a new device is - scanned for Logical Units (default 5). + scanned for Logical Units (default 1). usb-storage.quirks= [UMS] A list of quirks entries to supplement or diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt index f4f033c..45e777f 100644 --- a/Documentation/kmemleak.txt +++ b/Documentation/kmemleak.txt @@ -62,6 +62,10 @@ Memory may be allocated or freed before kmemleak is initialised and these actions are stored in an early log buffer. The size of this buffer is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option. +If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is +disabled by default. Passing "kmemleak=on" on the kernel command +line enables the function. + Basic Algorithm --------------- diff --git a/Documentation/locking/lglock.txt b/Documentation/locking/lglock.txt new file mode 100644 index 0000000..a6971e3 --- /dev/null +++ b/Documentation/locking/lglock.txt @@ -0,0 +1,166 @@ +lglock - local/global locks for mostly local access patterns +------------------------------------------------------------ + +Origin: Nick Piggin's VFS scalability series introduced during + 2.6.35++ [1] [2] +Location: kernel/locking/lglock.c + include/linux/lglock.h +Users: currently only the VFS and stop_machine related code + +Design Goal: +------------ + +Improve scalability of globally used large data sets that are +distributed over all CPUs as per_cpu elements. + +To manage global data structures that are partitioned over all CPUs +as per_cpu elements but can be mostly handled by CPU local actions +lglock will be used where the majority of accesses are cpu local +reading and occasional cpu local writing with very infrequent +global write access. + + +* deal with things locally whenever possible + - very fast access to the local per_cpu data + - reasonably fast access to specific per_cpu data on a different + CPU +* while making global action possible when needed + - by expensive access to all CPUs locks - effectively + resulting in a globally visible critical section. + +Design: +------- + +Basically it is an array of per_cpu spinlocks with the +lg_local_lock/unlock accessing the local CPUs lock object and the +lg_local_lock_cpu/unlock_cpu accessing a remote CPUs lock object +the lg_local_lock has to disable preemption as migration protection so +that the reference to the local CPUs lock does not go out of scope. +Due to the lg_local_lock/unlock only touching cpu-local resources it +is fast. Taking the local lock on a different CPU will be more +expensive but still relatively cheap. + +One can relax the migration constraints by acquiring the current +CPUs lock with lg_local_lock_cpu, remember the cpu, and release that +lock at the end of the critical section even if migrated. This should +give most of the performance benefits without inhibiting migration +though needs careful considerations for nesting of lglocks and +consideration of deadlocks with lg_global_lock. + +The lg_global_lock/unlock locks all underlying spinlocks of all +possible CPUs (including those off-line). The preemption disable/enable +are needed in the non-RT kernels to prevent deadlocks like: + + on cpu 1 + + task A task B + lg_global_lock + got cpu 0 lock + <<<< preempt <<<< + lg_local_lock_cpu for cpu 0 + spin on cpu 0 lock + +On -RT this deadlock scenario is resolved by the arch_spin_locks in the +lglocks being replaced by rt_mutexes which resolve the above deadlock +by boosting the lock-holder. + + +Implementation: +--------------- + +The initial lglock implementation from Nick Piggin used some complex +macros to generate the lglock/brlock in lglock.h - they were later +turned into a set of functions by Andi Kleen [7]. The change to functions +was motivated by the presence of multiple lock users and also by them +being easier to maintain than the generating macros. This change to +functions is also the basis to eliminated the restriction of not +being initializeable in kernel modules (the remaining problem is that +locks are not explicitly initialized - see lockdep-design.txt) + +Declaration and initialization: +------------------------------- + + #include <linux/lglock.h> + + DEFINE_LGLOCK(name) + or: + DEFINE_STATIC_LGLOCK(name); + + lg_lock_init(&name, "lockdep_name_string"); + + on UP this is mapped to DEFINE_SPINLOCK(name) in both cases, note + also that as of 3.18-rc6 all declaration in use are of the _STATIC_ + variant (and it seems that the non-static was never in use). + lg_lock_init is initializing the lockdep map only. + +Usage: +------ + +From the locking semantics it is a spinlock. It could be called a +locality aware spinlock. lg_local_* behaves like a per_cpu +spinlock and lg_global_* like a global spinlock. +No surprises in the API. + + lg_local_lock(*lglock); + access to protected per_cpu object on this CPU + lg_local_unlock(*lglock); + + lg_local_lock_cpu(*lglock, cpu); + access to protected per_cpu object on other CPU cpu + lg_local_unlock_cpu(*lglock, cpu); + + lg_global_lock(*lglock); + access all protected per_cpu objects on all CPUs + lg_global_unlock(*lglock); + + There are no _trylock variants of the lglocks. + +Note that the lg_global_lock/unlock has to iterate over all possible +CPUs rather than the actually present CPUs or a CPU could go off-line +with a held lock [4] and that makes it very expensive. A discussion on +these issues can be found at [5] + +Constraints: +------------ + + * currently the declaration of lglocks in kernel modules is not + possible, though this should be doable with little change. + * lglocks are not recursive. + * suitable for code that can do most operations on the CPU local + data and will very rarely need the global lock + * lg_global_lock/unlock is *very* expensive and does not scale + * on UP systems all lg_* primitives are simply spinlocks + * in PREEMPT_RT the spinlock becomes an rt-mutex and can sleep but + does not change the tasks state while sleeping [6]. + * in PREEMPT_RT the preempt_disable/enable in lg_local_lock/unlock + is downgraded to a migrate_disable/enable, the other + preempt_disable/enable are downgraded to barriers [6]. + The deadlock noted for non-RT above is resolved due to rt_mutexes + boosting the lock-holder in this case which arch_spin_locks do + not do. + +lglocks were designed for very specific problems in the VFS and probably +only are the right answer in these corner cases. Any new user that looks +at lglocks probably wants to look at the seqlock and RCU alternatives as +her first choice. There are also efforts to resolve the RCU issues that +currently prevent using RCU in place of view remaining lglocks. + +Note on brlock history: +----------------------- + +The 'Big Reader' read-write spinlocks were originally introduced by +Ingo Molnar in 2000 (2.4/2.5 kernel series) and removed in 2003. They +later were introduced by the VFS scalability patch set in 2.6 series +again as the "big reader lock" brlock [2] variant of lglock which has +been replaced by seqlock primitives or by RCU based primitives in the +3.13 kernel series as was suggested in [3] in 2003. The brlock was +entirely removed in the 3.13 kernel series. + +Link: 1 http://lkml.org/lkml/2010/8/2/81 +Link: 2 http://lwn.net/Articles/401738/ +Link: 3 http://lkml.org/lkml/2003/3/9/205 +Link: 4 https://lkml.org/lkml/2011/8/24/185 +Link: 5 http://lkml.org/lkml/2011/12/18/189 +Link: 6 https://www.kernel.org/pub/linux/kernel/projects/rt/ + patch series - lglocks-rt.patch.patch +Link: 7 http://lkml.org/lkml/2012/3/5/26 diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 22a969c..7ee2ae6 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -121,22 +121,22 @@ For example, consider the following sequence of events: The set of accesses as seen by the memory system in the middle can be arranged in 24 different combinations: - STORE A=3, STORE B=4, x=LOAD A->3, y=LOAD B->4 - STORE A=3, STORE B=4, y=LOAD B->4, x=LOAD A->3 - STORE A=3, x=LOAD A->3, STORE B=4, y=LOAD B->4 - STORE A=3, x=LOAD A->3, y=LOAD B->2, STORE B=4 - STORE A=3, y=LOAD B->2, STORE B=4, x=LOAD A->3 - STORE A=3, y=LOAD B->2, x=LOAD A->3, STORE B=4 - STORE B=4, STORE A=3, x=LOAD A->3, y=LOAD B->4 + STORE A=3, STORE B=4, y=LOAD A->3, x=LOAD B->4 + STORE A=3, STORE B=4, x=LOAD B->4, y=LOAD A->3 + STORE A=3, y=LOAD A->3, STORE B=4, x=LOAD B->4 + STORE A=3, y=LOAD A->3, x=LOAD B->2, STORE B=4 + STORE A=3, x=LOAD B->2, STORE B=4, y=LOAD A->3 + STORE A=3, x=LOAD B->2, y=LOAD A->3, STORE B=4 + STORE B=4, STORE A=3, y=LOAD A->3, x=LOAD B->4 STORE B=4, ... ... and can thus result in four different combinations of values: - x == 1, y == 2 - x == 1, y == 4 - x == 3, y == 2 - x == 3, y == 4 + x == 2, y == 1 + x == 2, y == 3 + x == 4, y == 1 + x == 4, y == 3 Furthermore, the stores committed by a CPU to the memory system may not be @@ -694,6 +694,24 @@ Please note once again that the stores to 'b' differ. If they were identical, as noted earlier, the compiler could pull this store outside of the 'if' statement. +You must also be careful not to rely too much on boolean short-circuit +evaluation. Consider this example: + + q = ACCESS_ONCE(a); + if (a || 1 > 0) + ACCESS_ONCE(b) = 1; + +Because the second condition is always true, the compiler can transform +this example as following, defeating control dependency: + + q = ACCESS_ONCE(a); + ACCESS_ONCE(b) = 1; + +This example underscores the need to ensure that the compiler cannot +out-guess your code. More generally, although ACCESS_ONCE() does force +the compiler to actually emit code for a given load, it does not force +the compiler to use the results. + Finally, control dependencies do -not- provide transitivity. This is demonstrated by two related examples, with the initial values of x and y both being zero: @@ -2465,10 +2483,15 @@ functions: Please refer to the PCI specification for more information on interactions between PCI transactions. - (*) readX_relaxed() + (*) readX_relaxed(), writeX_relaxed() - These are similar to readX(), but are not guaranteed to be ordered in any - way. Be aware that there is no I/O read barrier available. + These are similar to readX() and writeX(), but provide weaker memory + ordering guarantees. Specifically, they do not guarantee ordering with + respect to normal memory accesses (e.g. DMA buffers) nor do they guarantee + ordering with respect to LOCK or UNLOCK operations. If the latter is + required, an mmiowb() barrier can be used. Note that relaxed accesses to + the same peripheral are guaranteed to be ordered with respect to each + other. (*) ioreadX(), iowriteX() diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 0307e28..a476b08 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -56,6 +56,13 @@ ip_forward_use_pmtu - BOOLEAN 0 - disabled 1 - enabled +fwmark_reflect - BOOLEAN + Controls the fwmark of kernel-generated IPv4 reply packets that are not + associated with a socket for example, TCP RSTs or ICMP echo replies). + If unset, these packets have a fwmark of zero. If set, they have the + fwmark of the packet they are replying to. + Default: 0 + route/max_size - INTEGER Maximum number of routes allowed in the kernel. Increase this when using large numbers of interfaces and/or routes. @@ -1201,6 +1208,13 @@ conf/all/forwarding - BOOLEAN proxy_ndp - BOOLEAN Do proxy ndp. +fwmark_reflect - BOOLEAN + Controls the fwmark of kernel-generated IPv6 reply packets that are not + associated with a socket for example, TCP RSTs or ICMPv6 echo replies). + If unset, these packets have a fwmark of zero. If set, they have the + fwmark of the packet they are replying to. + Default: 0 + conf/interface/*: Change special settings per interface. diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt index 412f45c..1d6d02d 100644 --- a/Documentation/networking/timestamping.txt +++ b/Documentation/networking/timestamping.txt @@ -136,7 +136,7 @@ SOF_TIMESTAMPING_OPT_ID: This option is implemented only for transmit timestamps. There, the timestamp is always looped along with a struct sock_extended_err. - The option modifies field ee_info to pass an id that is unique + The option modifies field ee_data to pass an id that is unique among all possibly concurrently outstanding timestamp requests for that socket. In practice, it is a monotonically increasing u32 (that wraps). diff --git a/Documentation/nios2/README b/Documentation/nios2/README new file mode 100644 index 0000000..054a67d --- /dev/null +++ b/Documentation/nios2/README @@ -0,0 +1,23 @@ +Linux on the Nios II architecture +================================= + +This is a port of Linux to Nios II (nios2) processor. + +In order to compile for Nios II, you need a version of GCC with support for the generic +system call ABI. Please see this link for more information on how compiling and booting +software for the Nios II platform: +http://www.rocketboards.org/foswiki/Documentation/NiosIILinuxUserManual + +For reference, please see the following link: +http://www.altera.com/literature/lit-nio2.jsp + +What is Nios II? +================ +Nios II is a 32-bit embedded-processor architecture designed specifically for the +Altera family of FPGAs. In order to support Linux, Nios II needs to be configured +with MMU and hardware multiplier enabled. + +Nios II ABI +=========== +Please refer to chapter "Application Binary Interface" in Nios II Processor Reference +Handbook. diff --git a/Documentation/prctl/Makefile b/Documentation/prctl/Makefile index 3e3232d..2948b7b 100644 --- a/Documentation/prctl/Makefile +++ b/Documentation/prctl/Makefile @@ -1,5 +1,5 @@ # List of programs to build -hostprogs-y := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test +hostprogs-$(CONFIG_X86) := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test # Tell kbuild to always build the programs always := $(hostprogs-y) diff --git a/Documentation/ptp/testptp.mk b/Documentation/ptp/testptp.mk new file mode 100644 index 0000000..4ef2d97 --- /dev/null +++ b/Documentation/ptp/testptp.mk @@ -0,0 +1,33 @@ +# PTP 1588 clock support - User space test program +# +# Copyright (C) 2010 OMICRON electronics GmbH +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +CC = $(CROSS_COMPILE)gcc +INC = -I$(KBUILD_OUTPUT)/usr/include +CFLAGS = -Wall $(INC) +LDLIBS = -lrt +PROGS = testptp + +all: $(PROGS) + +testptp: testptp.o + +clean: + rm -f testptp.o + +distclean: clean + rm -f $(PROGS) diff --git a/Documentation/scsi/libsas.txt b/Documentation/scsi/libsas.txt index 3cc9c78..8cac649 100644 --- a/Documentation/scsi/libsas.txt +++ b/Documentation/scsi/libsas.txt @@ -226,9 +226,6 @@ static int register_sas_ha(struct my_sas_ha *my_ha) my_ha->sas_ha.lldd_dev_found = my_dev_found; my_ha->sas_ha.lldd_dev_gone = my_dev_gone; - my_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num; (1) - - my_ha->sas_ha.lldd_queue_size = ha_can_queue; my_ha->sas_ha.lldd_execute_task = my_execute_task; my_ha->sas_ha.lldd_abort_task = my_abort_task; @@ -247,28 +244,6 @@ static int register_sas_ha(struct my_sas_ha *my_ha) return sas_register_ha(&my_ha->sas_ha); } -(1) This is normally a LLDD parameter, something of the -lines of a task collector. What it tells the SAS Layer is -whether the SAS layer should run in Direct Mode (default: -value 0 or 1) or Task Collector Mode (value greater than 1). - -In Direct Mode, the SAS Layer calls Execute Task as soon as -it has a command to send to the SDS, _and_ this is a single -command, i.e. not linked. - -Some hardware (e.g. aic94xx) has the capability to DMA more -than one task at a time (interrupt) from host memory. Task -Collector Mode is an optional feature for HAs which support -this in their hardware. (Again, it is completely optional -even if your hardware supports it.) - -In Task Collector Mode, the SAS Layer would do _natural_ -coalescing of tasks and at the appropriate moment it would -call your driver to DMA more than one task in a single HA -interrupt. DMBS may want to use this by insmod/modprobe -setting the lldd_max_execute_num to something greater than -1. - (2) SAS 1.1 does not define I_T Nexus Reset TMF. Events @@ -325,71 +300,22 @@ PHYE_SPINUP_HOLD -- SATA is present, COMWAKE not sent. The Execute Command SCSI RPC: - int (*lldd_execute_task)(struct sas_task *, int num, - unsigned long gfp_flags); + int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags); -Used to queue a task to the SAS LLDD. @task is the tasks to -be executed. @num should be the number of tasks being -queued at this function call (they are linked listed via -task::list), @gfp_mask should be the gfp_mask defining the -context of the caller. +Used to queue a task to the SAS LLDD. @task is the task to be executed. +@gfp_mask is the gfp_mask defining the context of the caller. This function should implement the Execute Command SCSI RPC, -or if you're sending a SCSI Task as linked commands, you -should also use this function. -That is, when lldd_execute_task() is called, the command(s) +That is, when lldd_execute_task() is called, the command go out on the transport *immediately*. There is *no* queuing of any sort and at any level in a SAS LLDD. -The use of task::list is two-fold, one for linked commands, -the other discussed below. - -It is possible to queue up more than one task at a time, by -initializing the list element of struct sas_task, and -passing the number of tasks enlisted in this manner in num. - Returns: -SAS_QUEUE_FULL, -ENOMEM, nothing was queued; 0, the task(s) were queued. -If you want to pass num > 1, then either -A) you're the only caller of this function and keep track - of what you've queued to the LLDD, or -B) you know what you're doing and have a strategy of - retrying. - -As opposed to queuing one task at a time (function call), -batch queuing of tasks, by having num > 1, greatly -simplifies LLDD code, sequencer code, and _hardware design_, -and has some performance advantages in certain situations -(DBMS). - -The LLDD advertises if it can take more than one command at -a time at lldd_execute_task(), by setting the -lldd_max_execute_num parameter (controlled by "collector" -module parameter in aic94xx SAS LLDD). - -You should leave this to the default 1, unless you know what -you're doing. - -This is a function of the LLDD, to which the SAS layer can -cater to. - -int lldd_queue_size - The host adapter's queue size. This is the maximum -number of commands the lldd can have pending to domain -devices on behalf of all upper layers submitting through -lldd_execute_task(). - -You really want to set this to something (much) larger than -1. - -This _really_ has absolutely nothing to do with queuing. -There is no queuing in SAS LLDDs. - struct sas_task { dev -- the device this task is destined to - list -- must be initialized (INIT_LIST_HEAD) task_proto -- _one_ of enum sas_proto scatter -- pointer to scatter gather list array num_scatter -- number of elements in scatter diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index d6a9bde..731bc4f 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -149,7 +149,7 @@ scsi_add_host() ----> scsi_scan_host() -------+ | slave_alloc() - slave_configure() --> scsi_adjust_queue_depth() + slave_configure() --> scsi_change_queue_depth() | slave_alloc() slave_configure() @@ -159,7 +159,7 @@ scsi_scan_host() -------+ ------------------------------------------------------------ If the LLD wants to adjust the default queue settings, it can invoke -scsi_adjust_queue_depth() in its slave_configure() routine. +scsi_change_queue_depth() in its slave_configure() routine. *** For scsi devices that the mid level tries to scan but do not respond, a slave_alloc(), slave_destroy() pair is called. @@ -203,7 +203,7 @@ LLD mid level LLD scsi_add_device() ------+ | slave_alloc() - slave_configure() [--> scsi_adjust_queue_depth()] + slave_configure() [--> scsi_change_queue_depth()] ------------------------------------------------------------ In a similar fashion, an LLD may become aware that a SCSI device has been @@ -261,7 +261,7 @@ init_this_scsi_driver() ----+ | scsi_register() | slave_alloc() - slave_configure() --> scsi_adjust_queue_depth() + slave_configure() --> scsi_change_queue_depth() slave_alloc() *** slave_destroy() *** | @@ -271,9 +271,9 @@ init_this_scsi_driver() ----+ slave_destroy() *** ------------------------------------------------------------ -The mid level invokes scsi_adjust_queue_depth() with tagged queuing off and -"cmd_per_lun" for that host as the queue length. These settings can be -overridden by a slave_configure() supplied by the LLD. +The mid level invokes scsi_change_queue_depth() with "cmd_per_lun" for that +host as the queue length. These settings can be overridden by a +slave_configure() supplied by the LLD. *** For scsi devices that the mid level tries to scan but do not respond, a slave_alloc(), slave_destroy() pair is called. @@ -366,13 +366,11 @@ is initialized. The functions below are listed alphabetically and their names all start with "scsi_". Summary: - scsi_activate_tcq - turn on tag command queueing scsi_add_device - creates new scsi device (lu) instance scsi_add_host - perform sysfs registration and set up transport class - scsi_adjust_queue_depth - change the queue depth on a SCSI device + scsi_change_queue_depth - change the queue depth on a SCSI device scsi_bios_ptable - return copy of block device's partition table scsi_block_requests - prevent further commands being queued to given host - scsi_deactivate_tcq - turn off tag command queueing scsi_host_alloc - return a new scsi_host instance whose refcount==1 scsi_host_get - increments Scsi_Host instance's refcount scsi_host_put - decrements Scsi_Host instance's refcount (free if 0) @@ -390,24 +388,6 @@ Summary: Details: /** - * scsi_activate_tcq - turn on tag command queueing ("ordered" task attribute) - * @sdev: device to turn on TCQ for - * @depth: queue depth - * - * Returns nothing - * - * Might block: no - * - * Notes: Eventually, it is hoped depth would be the maximum depth - * the device could cope with and the real queue depth - * would be adjustable from 0 to depth. - * - * Defined (inline) in: include/scsi/scsi_tcq.h - **/ -void scsi_activate_tcq(struct scsi_device *sdev, int depth) - - -/** * scsi_add_device - creates new scsi device (lu) instance * @shost: pointer to scsi host instance * @channel: channel number (rarely other than 0) @@ -456,11 +436,8 @@ int scsi_add_host(struct Scsi_Host *shost, struct device * dev) /** - * scsi_adjust_queue_depth - allow LLD to change queue depth on a SCSI device + * scsi_change_queue_depth - allow LLD to change queue depth on a SCSI device * @sdev: pointer to SCSI device to change queue depth on - * @tagged: 0 - no tagged queuing - * MSG_SIMPLE_TAG - simple tagged queuing - * MSG_ORDERED_TAG - ordered tagged queuing * @tags Number of tags allowed if tagged queuing enabled, * or number of commands the LLD can queue up * in non-tagged mode (as per cmd_per_lun). @@ -471,15 +448,12 @@ int scsi_add_host(struct Scsi_Host *shost, struct device * dev) * * Notes: Can be invoked any time on a SCSI device controlled by this * LLD. [Specifically during and after slave_configure() and prior to - * slave_destroy().] Can safely be invoked from interrupt code. Actual - * queue depth change may be delayed until the next command is being - * processed. See also scsi_activate_tcq() and scsi_deactivate_tcq(). + * slave_destroy().] Can safely be invoked from interrupt code. * * Defined in: drivers/scsi/scsi.c [see source code for more notes] * **/ -void scsi_adjust_queue_depth(struct scsi_device * sdev, int tagged, - int tags) +int scsi_change_queue_depth(struct scsi_device *sdev, int tags) /** @@ -515,20 +489,6 @@ void scsi_block_requests(struct Scsi_Host * shost) /** - * scsi_deactivate_tcq - turn off tag command queueing - * @sdev: device to turn off TCQ for - * @depth: queue depth (stored in sdev) - * - * Returns nothing - * - * Might block: no - * - * Defined (inline) in: include/scsi/scsi_tcq.h - **/ -void scsi_deactivate_tcq(struct scsi_device *sdev, int depth) - - -/** * scsi_host_alloc - create a scsi host adapter instance and perform basic * initialization. * @sht: pointer to scsi host template @@ -1254,7 +1214,7 @@ of interest: for disk firmware uploads. cmd_per_lun - maximum number of commands that can be queued on devices controlled by the host. Overridden by LLD calls to - scsi_adjust_queue_depth(). + scsi_change_queue_depth(). unchecked_isa_dma - 1=>only use bottom 16 MB of ram (ISA DMA addressing restriction), 0=>can use full 32 bit (or better) DMA address space @@ -1294,7 +1254,7 @@ struct scsi_cmnd Instances of this structure convey SCSI commands to the LLD and responses back to the mid level. The SCSI mid level will ensure that no more SCSI commands become queued against the LLD than are indicated by -scsi_adjust_queue_depth() (or struct Scsi_Host::cmd_per_lun). There will +scsi_change_queue_depth() (or struct Scsi_Host::cmd_per_lun). There will be at least one instance of struct scsi_cmnd available for each SCSI device. Members of interest: cmnd - array containing SCSI command diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt index f346abb..0d5bdb1 100644 --- a/Documentation/scsi/st.txt +++ b/Documentation/scsi/st.txt @@ -506,9 +506,11 @@ user does not request data that far.) DEBUGGING HINTS -To enable debugging messages, edit st.c and #define DEBUG 1. As seen -above, debugging can be switched off with an ioctl if debugging is -compiled into the driver. The debugging output is not voluminous. +Debugging code is now compiled in by default but debugging is turned off +with the kernel module parameter debug_flag defaulting to 0. Debugging +can still be switched on and off with an ioctl. To enable debug at +module load time add debug_flag=1 to the module load options, the +debugging output is not voluminous. If the tape seems to hang, I would be very interested to hear where the driver is waiting. With the command 'ps -l' you can see the state diff --git a/Documentation/scsi/wd719x.txt b/Documentation/scsi/wd719x.txt new file mode 100644 index 0000000..0816b02 --- /dev/null +++ b/Documentation/scsi/wd719x.txt @@ -0,0 +1,21 @@ +Driver for Western Digital WD7193, WD7197 and WD7296 SCSI cards +--------------------------------------------------------------- + +The card requires firmware that can be cut out of the Windows NT driver that +can be downloaded from WD at: +http://support.wdc.com/product/download.asp?groupid=801&sid=27&lang=en + +There is no license anywhere in the file or on the page - so the firmware +probably cannot be added to linux-firmware. + +This script downloads and extracts the firmware, creating wd719x-risc.bin and +d719x-wcs.bin files. Put them in /lib/firmware/. + +#!/bin/sh +wget http://support.wdc.com/download/archive/pciscsi.exe +lha xi pciscsi.exe pci-scsi.exe +lha xi pci-scsi.exe nt/wd7296a.sys +rm pci-scsi.exe +dd if=wd7296a.sys of=wd719x-risc.bin bs=1 skip=5760 count=14336 +dd if=wd7296a.sys of=wd719x-wcs.bin bs=1 skip=20096 count=514 +rm wd7296a.sys diff --git a/Documentation/vDSO/Makefile b/Documentation/vDSO/Makefile index 2b99e57..ee075c3 100644 --- a/Documentation/vDSO/Makefile +++ b/Documentation/vDSO/Makefile @@ -10,3 +10,6 @@ always := $(hostprogs-y) HOSTCFLAGS := -I$(objtree)/usr/include -std=gnu99 HOSTCFLAGS_vdso_standalone_test_x86.o := -fno-asynchronous-unwind-tables -fno-stack-protector HOSTLOADLIBES_vdso_standalone_test_x86 := -nostdlib +ifeq ($(CONFIG_X86_32),y) +HOSTLOADLIBES_vdso_standalone_test_x86 += -lgcc_s +endif diff --git a/Documentation/vDSO/vdso_standalone_test_x86.c b/Documentation/vDSO/vdso_standalone_test_x86.c index d462402..93b0ebf 100644 --- a/Documentation/vDSO/vdso_standalone_test_x86.c +++ b/Documentation/vDSO/vdso_standalone_test_x86.c @@ -63,7 +63,7 @@ static inline void linux_exit(int code) x86_syscall3(__NR_exit, code, 0, 0); } -void to_base10(char *lastdig, uint64_t n) +void to_base10(char *lastdig, time_t n) { while (n) { *lastdig = (n % 10) + '0'; diff --git a/Documentation/video4linux/vivid.txt b/Documentation/video4linux/vivid.txt index eeb11a2..e5a940e 100644 --- a/Documentation/video4linux/vivid.txt +++ b/Documentation/video4linux/vivid.txt @@ -221,12 +221,11 @@ ccs_out_mode: specify the allowed video output crop/compose/scaling combination key, not quality. multiplanar: select whether each device instance supports multi-planar formats, - and thus the V4L2 multi-planar API. By default the first device instance - is single-planar, the second multi-planar, and it keeps alternating. + and thus the V4L2 multi-planar API. By default device instances are + single-planar. This module option can override that for each instance. Values are: - 0: use alternating single and multi-planar devices. 1: this is a single-planar instance. 2: this is a multi-planar instance. @@ -975,9 +974,8 @@ is set, then the alpha component is only used for the color red and set to 0 otherwise. The driver has to be configured to support the multiplanar formats. By default -the first driver instance is single-planar, the second is multi-planar, and it -keeps alternating. This can be changed by setting the multiplanar module option, -see section 1 for more details on that option. +the driver instances are single-planar. This can be changed by setting the +multiplanar module option, see section 1 for more details on that option. If the driver instance is using the multiplanar formats/API, then the first single planar format (YUYV) and the multiplanar NV16M and NV61M formats the @@ -1021,7 +1019,7 @@ the output overlay for the video output, turn on video looping and capture to see the blended framebuffer overlay that's being written to by the second instance. This setup would require the following commands: - $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 multiplanar=1,1 + $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 $ v4l2-ctl -d1 --find-fb /dev/fb1 is the framebuffer associated with base address 0x12800000 $ sudo v4l2-ctl -d2 --set-fbuf fb=1 diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index bdd4bb9..b64e0af 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -274,7 +274,7 @@ This command mounts a (pseudo) filesystem of type hugetlbfs on the directory /mnt/huge. Any files created on /mnt/huge uses huge pages. The uid and gid options sets the owner and group of the root of the file system. By default the uid and gid of the current process are taken. The mode option sets the -mode of root of file system to value & 0777. This value is given in octal. +mode of root of file system to value & 01777. This value is given in octal. By default the value 0755 is picked. The size option sets the maximum value of memory (huge pages) allowed for that filesystem (/mnt/huge). The size is rounded down to HPAGE_SIZE. The option nr_inodes sets the maximum number of |