diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 66 |
1 files changed, 55 insertions, 11 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0c5ff3e..f1b1579 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -411,6 +411,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SX. + config DEBUG_IMX7D_UART + bool "i.MX7D Debug UART" + depends on SOC_IMX7D + help + Say Y here if you want kernel low-level debugging support + on i.MX7D. + config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE @@ -434,6 +441,14 @@ choice Say Y here if you want kernel low-level debugging support on KS8695. + config DEBUG_LPC18XX_UART0 + bool "Kernel low-level debugging via LPC18xx/43xx UART0" + depends on ARCH_LPC18XX + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on NXP LPC18xx/43xx UART0. + config DEBUG_MESON_UARTAO bool "Kernel low-level debugging via Meson6 UARTAO" depends on ARCH_MESON @@ -909,13 +924,22 @@ choice on SA-11x0 UART ports. The kernel will check for the first enabled UART in a sequence 3-1-2. - config DEBUG_SOCFPGA_UART + config DEBUG_SOCFPGA_UART0 + depends on ARCH_SOCFPGA + bool "Use SOCFPGA UART0 for low-level debug" + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on SOCFPGA(Cyclone 5 and Arria 5) based platforms. + + config DEBUG_SOCFPGA_UART1 depends on ARCH_SOCFPGA - bool "Use SOCFPGA UART for low-level debug" + bool "Use SOCFPGA UART1 for low-level debug" select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on SOCFPGA based platforms. + on SOCFPGA(Arria 10) based platforms. + config DEBUG_SUN9I_UART0 bool "Kernel low-level debugging messages via sun9i UART0" @@ -1158,6 +1182,18 @@ choice For more details about semihosting, please see chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. + config DEBUG_ZTE_ZX + bool "Use ZTE ZX UART" + select DEBUG_UART_PL01X + depends on ARCH_ZX + help + Say Y here if you are enabling ZTE ZX296702 SOC and need + debug uart support. + + This option is preferred over the platform specific + options; the platform specific options are deprecated + and will be soon removed. + config DEBUG_LL_UART_8250 bool "Kernel low-level debugging via 8250 UART" help @@ -1232,7 +1268,8 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ - DEBUG_IMX6SX_UART + DEBUG_IMX6SX_UART || \ + DEBUG_IMX7D_UART default 1 depends on ARCH_MXC help @@ -1282,7 +1319,8 @@ config DEBUG_LL_INCLUDE DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ - DEBUG_IMX6SX_UART + DEBUG_IMX6SX_UART || \ + DEBUG_IMX7D_UART default "debug/ks8695.S" if DEBUG_KS8695_UART default "debug/msm.S" if DEBUG_QCOM_UARTDM default "debug/netx.S" if DEBUG_NETX_UART @@ -1338,6 +1376,7 @@ config DEBUG_UART_PHYS default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC default 0x07000000 if DEBUG_SUN9I_UART0 + default 0x09405000 if DEBUG_ZTE_ZX default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1360,6 +1399,7 @@ config DEBUG_UART_PHYS default 0x20201000 if DEBUG_BCM2835 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x4000e400 if DEBUG_LL_UART_EFM32 + default 0x40081000 if DEBUG_LPC18XX_UART0 default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI @@ -1408,7 +1448,8 @@ config DEBUG_UART_PHYS default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfe800000 if ARCH_IOP32X default 0xff690000 if DEBUG_RK32_UART2 - default 0xffc02000 if DEBUG_SOCFPGA_UART + default 0xffc02000 if DEBUG_SOCFPGA_UART0 + default 0xffc02100 if DEBUG_SOCFPGA_UART1 default 0xffd82340 if ARCH_IOP13XX default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 @@ -1467,6 +1508,7 @@ config DEBUG_UART_VIRT default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfc40ab00 if DEBUG_BRCMSTB_UART + default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_UART_BCM63XX default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX @@ -1486,7 +1528,8 @@ config DEBUG_UART_VIRT default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 - default 0xfec02000 if DEBUG_SOCFPGA_UART + default 0xfec02000 if DEBUG_SOCFPGA_UART0 + default 0xfec02100 if DEBUG_SOCFPGA_UART1 default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 @@ -1531,8 +1574,9 @@ config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 - default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ - ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \ + default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \ + DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \ + DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ @@ -1545,7 +1589,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG + depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help @@ -1562,7 +1606,7 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARCH_EFM32 || \ + PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \ ARCH_SHMOBILE_LEGACY default "mach/uncompress.h" |