diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 134 |
1 files changed, 119 insertions, 15 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 166efa2..48a0628 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -7,7 +7,7 @@ config ARM select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION - select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) + select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL) @@ -24,7 +24,7 @@ config ARM select HAVE_PERF_EVENTS select PERF_USE_VMALLOC select HAVE_REGS_AND_STACK_ACCESS_API - select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7)) + select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_C_RECORDMCOUNT select HAVE_GENERIC_HARDIRQS select HAVE_SPARSE_IRQ @@ -63,6 +63,10 @@ config GENERIC_CLOCKEVENTS_BROADCAST depends on GENERIC_CLOCKEVENTS default y if SMP +config KTIME_SCALAR + bool + default y + config HAVE_TCM bool select GENERIC_ALLOCATOR @@ -178,11 +182,6 @@ config FIQ config ARCH_MTD_XIP bool -config ARM_L1_CACHE_SHIFT_6 - bool - help - Setting ARM L1 cache line size to 64 Bytes. - config VECTORS_BASE hex default 0xffff0000 if MMU || CPU_HIGH_VECTOR @@ -191,6 +190,22 @@ config VECTORS_BASE help The base address of exception vectors. +config ARM_PATCH_PHYS_VIRT + bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on !XIP_KERNEL && MMU + depends on !ARCH_REALVIEW || !SPARSEMEM + help + Patch phys-to-virt translation functions at runtime according to + the position of the kernel in system memory. + + This can only be used with non-XIP with MMU kernels where + the base of physical memory is at a 16MB boundary. + +config ARM_PATCH_PHYS_VIRT_16BIT + def_bool y + depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -346,7 +361,7 @@ config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 select FOOTBRIDGE - select ARCH_USES_GETTIMEOFFSET + select GENERIC_CLOCKEVENTS help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -457,6 +472,7 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" + select CPU_V6K select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS @@ -875,6 +891,16 @@ config PLAT_SPEAR help Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). +config ARCH_VT8500 + bool "VIA/WonderMedia 85xx" + select CPU_ARM926T + select GENERIC_GPIO + select ARCH_HAS_CPUFREQ + select GENERIC_CLOCKEVENTS + select ARCH_REQUIRE_GPIOLIB + select HAVE_PWM + help + Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. endchoice # @@ -1007,6 +1033,8 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" +source "arch/arm/mach-vt8500/Kconfig" + source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier @@ -1048,7 +1076,7 @@ config XSCALE_PMU default y config CPU_HAS_PMU - depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \ + depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \ (!ARCH_OMAP3 || OMAP3_EMU) default y bool @@ -1064,7 +1092,7 @@ endif config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" - depends on CPU_V6 + depends on CPU_V6 || CPU_V6K help Invalidation of the Instruction Cache operation can fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. @@ -1140,7 +1168,7 @@ config ARM_ERRATA_742231 config PL310_ERRATA_588369 bool "Clean & Invalidate maintenance operations do not invalidate clean lines" - depends on CACHE_L2X0 && ARCH_OMAP4 + depends on CACHE_L2X0 help The PL310 L2 cache controller implements three types of Clean & Invalidate maintenance operations: by Physical Address @@ -1149,8 +1177,7 @@ config PL310_ERRATA_588369 clean operation followed immediately by an invalidate operation, both performing to the same memory location. This functionality is not correctly implemented in PL310 as clean lines are not - invalidated as a result of these operations. Note that this errata - uses Texas Instrument's secure monitor api. + invalidated as a result of these operations. config ARM_ERRATA_720789 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" @@ -1164,6 +1191,17 @@ config ARM_ERRATA_720789 tables. The workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. +config PL310_ERRATA_727915 + bool "Background Clean & Invalidate by Way operation can cause data corruption" + depends on CACHE_L2X0 + help + PL310 implements the Clean & Invalidate by Way L2 cache maintenance + operation (offset 0x7FC). This operation runs in background so that + PL310 can handle normal accesses while it is in progress. Under very + rare circumstances, due to this erratum, write data can be lost when + PL310 treats a cacheable write transaction during a Clean & + Invalidate by Way operation. + config ARM_ERRATA_743622 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" depends on CPU_V7 @@ -1202,6 +1240,28 @@ config ARM_ERRATA_753970 This has the same effect as the cache sync operation: store buffer drain and waiting for all buffers empty. +config ARM_ERRATA_754322 + bool "ARM errata: possible faulty MMU translations following an ASID switch" + depends on CPU_V7 + help + This option enables the workaround for the 754322 Cortex-A9 (r2p*, + r3p*) erratum. A speculative memory access may cause a page table walk + which starts prior to an ASID switch but completes afterwards. This + can populate the micro-TLB with a stale entry which may be hit with + the new ASID. This workaround places two dsb instructions in the mm + switching code so that no page table walks can cross the ASID switch. + +config ARM_ERRATA_754327 + bool "ARM errata: no automatic Store Buffer drain" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 754327 Cortex-A9 (prior to + r2p0) erratum. The Store Buffer does not have any automatic draining + mechanism and therefore a livelock may occur if an external agent + continuously polls a memory location waiting to observe an update. + This workaround defines cpu_relax() as smp_mb(), preventing correctly + written polling loops from denying visibility of updates to memory. + endmenu source "arch/arm/common/Kconfig" @@ -1275,6 +1335,7 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" depends on EXPERIMENTAL + depends on CPU_V6K || CPU_V7 depends on GENERIC_CLOCKEVENTS depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ @@ -1386,7 +1447,7 @@ config HZ config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" - depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL + depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL select AEABI select ARM_ASM_UNIFIED help @@ -1396,6 +1457,37 @@ config THUMB2_KERNEL If unsure, say N. +config THUMB2_AVOID_R_ARM_THM_JUMP11 + bool "Work around buggy Thumb-2 short branch relocations in gas" + depends on THUMB2_KERNEL && MODULES + default y + help + Various binutils versions can resolve Thumb-2 branches to + locally-defined, preemptible global symbols as short-range "b.n" + branch instructions. + + This is a problem, because there's no guarantee the final + destination of the symbol, or any candidate locations for a + trampoline, are within range of the branch. For this reason, the + kernel does not support fixing up the R_ARM_THM_JUMP11 (102) + relocation in modules at all, and it makes little sense to add + support. + + The symptom is that the kernel fails with an "unsupported + relocation" error when loading some modules. + + Until fixed tools are available, passing + -fno-optimize-sibling-calls to gcc should prevent gcc generating + code which hits this problem, at the cost of a bit of extra runtime + stack usage in some cases. + + The problem is described in more detail at: + https://bugs.launchpad.net/binutils-linaro/+bug/725126 + + Only Thumb-2 kernels are affected. + + Unless you are sure your tools don't have this problem, say Y. + config ARM_ASM_UNIFIED bool @@ -1644,6 +1736,18 @@ config ZBOOT_ROM Say Y here if you intend to execute your compressed kernel image (zImage) directly from ROM or flash. If unsure, say N. +config ZBOOT_ROM_MMCIF + bool "Include MMCIF loader in zImage (EXPERIMENTAL)" + depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL + help + Say Y here to include experimental MMCIF loading code in the + ROM-able zImage. With this enabled it is possible to write the + the ROM-able zImage kernel image to an MMC card and boot the + kernel straight from the reset vector. At reset the processor + Mask ROM will load the first part of the the ROM-able zImage + which in turn loads the rest the kernel image to RAM using the + MMCIF hardware block. + config CMDLINE string "Default kernel command string" default "" @@ -1877,7 +1981,7 @@ config FPE_FASTFPE config VFP bool "VFP-format floating point maths" - depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON + depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON help Say Y to include VFP support code in the kernel. This is needed if your hardware includes a VFP unit. |