diff options
Diffstat (limited to 'arch/arm/boot/dts/berlin2cd.dtsi')
-rw-r--r-- | arch/arm/boot/dts/berlin2cd.dtsi | 66 |
1 files changed, 41 insertions, 25 deletions
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index cb2a97c..900213d 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -81,7 +81,7 @@ sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; - clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>; + clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>; clock-names = "io", "core"; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -105,14 +105,14 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&chip CLKID_TWD>; + clocks = <&chip_clk CLKID_TWD>; }; usb_phy0: usb-phy@b74000 { compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb74000 0x128>; #phy-cells = <0>; - resets = <&chip 0x178 23>; + resets = <&chip_rst 0x178 23>; status = "disabled"; }; @@ -120,14 +120,14 @@ compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb78000 0x128>; #phy-cells = <0>; - resets = <&chip 0x178 24>; + resets = <&chip_rst 0x178 24>; status = "disabled"; }; eth1: ethernet@b90000 { compatible = "marvell,pxa168-eth"; reg = <0xb90000 0x10000>; - clocks = <&chip CLKID_GETH1>; + clocks = <&chip_clk CLKID_GETH1>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; /* set by bootloader */ local-mac-address = [00 00 00 00 00 00]; @@ -145,7 +145,7 @@ eth0: ethernet@e50000 { compatible = "marvell,pxa168-eth"; reg = <0xe50000 0x10000>; - clocks = <&chip CLKID_GETH0>; + clocks = <&chip_clk CLKID_GETH0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; /* set by bootloader */ local-mac-address = [00 00 00 00 00 00]; @@ -244,7 +244,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -253,7 +253,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -262,7 +262,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -271,7 +271,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -280,7 +280,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -289,7 +289,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -298,7 +298,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -307,7 +307,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -323,16 +323,28 @@ }; chip: chip-control@ea0000 { - compatible = "marvell,berlin2cd-chip-ctrl"; - #clock-cells = <1>; - #reset-cells = <2>; + compatible = "simple-mfd", "syscon"; reg = <0xea0000 0x400>; - clocks = <&refclk>; - clock-names = "refclk"; - uart0_pmux: uart0-pmux { - groups = "G6"; - function = "uart0"; + chip_clk: clock { + compatible = "marvell,berlin2-clk"; + #clock-cells = <1>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + + soc_pinctrl: pin-controller { + compatible = "marvell,berlin2cd-soc-pinctrl"; + + uart0_pmux: uart0-pmux { + groups = "G6"; + function = "uart0"; + }; + }; + + chip_rst: reset { + compatible = "marvell,berlin2-reset"; + #reset-cells = <2>; }; }; @@ -340,7 +352,7 @@ compatible = "chipidea,usb2"; reg = <0xed0000 0x200>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_USB0>; + clocks = <&chip_clk CLKID_USB0>; phys = <&usb_phy0>; phy-names = "usb-phy"; status = "disabled"; @@ -350,7 +362,7 @@ compatible = "chipidea,usb2"; reg = <0xee0000 0x200>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_USB1>; + clocks = <&chip_clk CLKID_USB1>; phys = <&usb_phy1>; phy-names = "usb-phy"; status = "disabled"; @@ -417,8 +429,12 @@ }; sysctrl: system-controller@d000 { - compatible = "marvell,berlin2cd-system-ctrl"; + compatible = "simple-mfd", "syscon"; reg = <0xd000 0x100>; + + sys_pinctrl: pin-controller { + compatible = "marvell,berlin2cd-system-pinctrl"; + }; }; sic: interrupt-controller@e000 { |