diff options
Diffstat (limited to 'arch/arm/boot/dts/kirkwood-nsa310a.dts')
-rw-r--r-- | arch/arm/boot/dts/kirkwood-nsa310a.dts | 57 |
1 files changed, 3 insertions, 54 deletions
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index 27ca6a7..3d2b3d4 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -1,6 +1,6 @@ /dts-v1/; -#include "kirkwood-nsa310-common.dtsi" +#include "kirkwood-nsa3x0-common.dtsi" /* * There are at least two different NSA310 designs. This variant does @@ -17,10 +17,11 @@ chosen { bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-names = "default"; pmx_led_esata_green: pmx-led-esata-green { @@ -38,11 +39,6 @@ marvell,function = "gpio"; }; - pmx_usb_power_off: pmx-usb-power-off { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - pmx_led_sys_green: pmx-led-sys-green { marvell,pins = "mpp28"; marvell,function = "gpio"; @@ -53,26 +49,6 @@ marvell,function = "gpio"; }; - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_led_hdd_green: pmx-led-hdd-green { marvell,pins = "mpp41"; marvell,function = "gpio"; @@ -83,11 +59,6 @@ marvell,function = "gpio"; }; - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - }; i2c@11000 { @@ -100,28 +71,6 @@ }; }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - button@1 { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - button@2 { - label = "Copy Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - button@3 { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - }; - gpio-leds { compatible = "gpio-leds"; |