diff options
Diffstat (limited to 'arch/arm/mach-at91/board-cpu9krea.c')
| -rw-r--r-- | arch/arm/mach-at91/board-cpu9krea.c | 386 |
1 files changed, 0 insertions, 386 deletions
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c deleted file mode 100644 index 731c831..0000000 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ /dev/null @@ -1,386 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-cpu9krea.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * Copyright (C) 2009 Eric Benard - eric@eukrea.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/mtd/physmap.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> -#include <mach/at91sam9260_matrix.h> -#include <mach/at91_matrix.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - -static void __init cpu9krea_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata cpu9krea_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata cpu9krea_udc_data = { - .vbus_pin = AT91_PIN_PC8, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata cpu9krea_macb_data = { - .phy_irq_pin = -EINVAL, - .is_rmii = 1, -}; - -/* - * NAND flash - */ -static struct atmel_nand_data __initdata cpu9krea_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .bus_width_16 = 0, - .det_pin = -EINVAL, - .ecc_mode = NAND_ECC_SOFT, -}; - -#ifdef CONFIG_MACH_CPU9260 -static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; -#else -static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; -#endif - -static void __init cpu9krea_add_device_nand(void) -{ - sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config); - at91_add_device_nand(&cpu9krea_nand_data); -} - -/* - * NOR flash - */ -static struct physmap_flash_data cpuat9260_nor_data = { - .width = 2, -}; - -#define NOR_BASE AT91_CHIPSELECT_0 -#define NOR_SIZE SZ_64M - -static struct resource nor_flash_resources[] = { - { - .start = NOR_BASE, - .end = NOR_BASE + NOR_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cpu9krea_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &cpuat9260_nor_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -#ifdef CONFIG_MACH_CPU9260 -static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 10, - .nrd_pulse = 10, - .ncs_write_pulse = 6, - .nwe_pulse = 6, - - .read_cycle = 12, - .write_cycle = 8, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE - | AT91_SMC_DBW_16, - .tdf_cycles = 2, -}; -#else -static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 13, - .nrd_pulse = 13, - .ncs_write_pulse = 8, - .nwe_pulse = 8, - - .read_cycle = 15, - .write_cycle = 10, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE - | AT91_SMC_DBW_16, - .tdf_cycles = 2, -}; -#endif - -static __init void cpu9krea_add_device_nor(void) -{ - unsigned long csa; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V); - - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config); - - platform_device_register(&cpu9krea_nor_flash); -} - -/* - * LEDs - */ -static struct gpio_led cpu9krea_leds[] = { - { /* LED1 */ - .name = "LED1", - .gpio = AT91_PIN_PC11, - .active_low = 1, - .default_trigger = "timer", - }, - { /* LED2 */ - .name = "LED2", - .gpio = AT91_PIN_PC12, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* LED3 */ - .name = "LED3", - .gpio = AT91_PIN_PC7, - .active_low = 1, - .default_trigger = "none", - }, - { /* LED4 */ - .name = "LED4", - .gpio = AT91_PIN_PC9, - .active_low = 1, - .default_trigger = "none", - } -}; - -static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = { - { - I2C_BOARD_INFO("ds1339", 0x68), - }, -}; - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button cpu9krea_buttons[] = { - { - .gpio = AT91_PIN_PC3, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PB20, - .code = BTN_1, - .desc = "BP2", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data cpu9krea_button_data = { - .buttons = cpu9krea_buttons, - .nbuttons = ARRAY_SIZE(cpu9krea_buttons), -}; - -static struct platform_device cpu9krea_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &cpu9krea_button_data, - } -}; - -static void __init cpu9krea_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PC3, 1); /* BP1 */ - at91_set_deglitch(AT91_PIN_PC3, 1); - at91_set_gpio_input(AT91_PIN_PB20, 1); /* BP2 */ - at91_set_deglitch(AT91_PIN_PB20, 1); - - platform_device_register(&cpu9krea_button_device); -} -#else -static void __init cpu9krea_add_device_buttons(void) -{ -} -#endif - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata cpu9krea_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PA29, - .wp_pin = -EINVAL, - }, -}; - -static void __init cpu9krea_board_init(void) -{ - at91_register_devices(); - - /* NOR */ - cpu9krea_add_device_nor(); - /* Serial */ - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | - ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | - ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* USART3 on ttyS4. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US3, 4, 0); - - /* USART4 on ttyS5. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - - /* USART5 on ttyS6. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&cpu9krea_usbh_data); - /* USB Device */ - at91_add_device_udc(&cpu9krea_udc_data); - /* NAND */ - cpu9krea_add_device_nand(); - /* Ethernet */ - at91_add_device_eth(&cpu9krea_macb_data); - /* MMC */ - at91_add_device_mci(0, &cpu9krea_mci0_data); - /* I2C */ - at91_add_device_i2c(cpu9krea_i2c_devices, - ARRAY_SIZE(cpu9krea_i2c_devices)); - /* LEDs */ - at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds)); - /* Push Buttons */ - cpu9krea_add_device_buttons(); -} - -#ifdef CONFIG_MACH_CPU9260 -MACHINE_START(CPUAT9260, "Eukrea CPU9260") -#else -MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") -#endif - /* Maintainer: Eric Benard - EUKREA Electromatique */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = cpu9krea_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cpu9krea_board_init, -MACHINE_END |