diff options
Diffstat (limited to 'arch/arm/mach-bcm')
-rw-r--r-- | arch/arm/mach-bcm/Kconfig | 2 | ||||
-rw-r--r-- | arch/arm/mach-bcm/Makefile | 9 | ||||
-rw-r--r-- | arch/arm/mach-bcm/bcm63xx_headsmp.S | 23 | ||||
-rw-r--r-- | arch/arm/mach-bcm/bcm63xx_pmb.c | 221 | ||||
-rw-r--r-- | arch/arm/mach-bcm/bcm63xx_smp.c | 169 | ||||
-rw-r--r-- | arch/arm/mach-bcm/bcm63xx_smp.h | 9 | ||||
-rw-r--r-- | arch/arm/mach-bcm/bcm_5301x.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-bcm/board_bcm2835.c | 91 | ||||
-rw-r--r-- | arch/arm/mach-bcm/brcmstb.h | 19 | ||||
-rw-r--r-- | arch/arm/mach-bcm/headsmp-brcmstb.S | 33 | ||||
-rw-r--r-- | arch/arm/mach-bcm/platsmp-brcmstb.c | 4 |
11 files changed, 437 insertions, 152 deletions
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 8b11f44..e9184fe 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -19,6 +19,7 @@ config ARCH_BCM_IPROC select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select PINCTRL + select MTD_NAND_BRCMNAND help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common @@ -144,6 +145,7 @@ config ARCH_BRCMSTB select BRCMSTB_GISB_ARB select BRCMSTB_L2_IRQ select BCM7120_L2_IRQ + select ARCH_WANT_OPTIONAL_GPIOLIB help Say Y if you intend to run the kernel on a Broadcom ARM-based STB chipset. diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 4c38674..4fb0da4 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -38,10 +38,15 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o # BCM63XXx -obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o +ifeq ($(CONFIG_ARCH_BCM_63XX),y) +CFLAGS_bcm63xx_headsmp.o += -march=armv7-a +obj-y += bcm63xx.o +obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_headsmp.o \ + bcm63xx_pmb.o +endif ifeq ($(CONFIG_ARCH_BRCMSTB),y) CFLAGS_platsmp-brcmstb.o += -march=armv7-a obj-y += brcmstb.o -obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o +obj-$(CONFIG_SMP) += platsmp-brcmstb.o endif diff --git a/arch/arm/mach-bcm/bcm63xx_headsmp.S b/arch/arm/mach-bcm/bcm63xx_headsmp.S new file mode 100644 index 0000000..c7af397 --- /dev/null +++ b/arch/arm/mach-bcm/bcm63xx_headsmp.S @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2015, Broadcom Corporation + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> + +ENTRY(bcm63138_secondary_startup) + ARM_BE8(setend be) + /* + * L1 cache does have unpredictable contents at power-up clean its + * contents without flushing + */ + bl v7_invalidate_l1 + nop + + b secondary_startup +ENDPROC(bcm63138_secondary_startup) diff --git a/arch/arm/mach-bcm/bcm63xx_pmb.c b/arch/arm/mach-bcm/bcm63xx_pmb.c new file mode 100644 index 0000000..de061ec --- /dev/null +++ b/arch/arm/mach-bcm/bcm63xx_pmb.c @@ -0,0 +1,221 @@ +/* + * Broadcom BCM63138 PMB initialization for secondary CPU(s) + * + * Copyright (C) 2015 Broadcom Corporation + * Author: Florian Fainelli <f.fainelli@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/reset/bcm63xx_pmb.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "bcm63xx_smp.h" + +/* ARM Control register definitions */ +#define CORE_PWR_CTRL_SHIFT 0 +#define CORE_PWR_CTRL_MASK 0x3 +#define PLL_PWR_ON BIT(8) +#define PLL_LDO_PWR_ON BIT(9) +#define PLL_CLAMP_ON BIT(10) +#define CPU_RESET_N(x) BIT(13 + (x)) +#define NEON_RESET_N BIT(15) +#define PWR_CTRL_STATUS_SHIFT 28 +#define PWR_CTRL_STATUS_MASK 0x3 +#define PWR_DOWN_SHIFT 30 +#define PWR_DOWN_MASK 0x3 + +/* CPU Power control register definitions */ +#define MEM_PWR_OK BIT(0) +#define MEM_PWR_ON BIT(1) +#define MEM_CLAMP_ON BIT(2) +#define MEM_PWR_OK_STATUS BIT(4) +#define MEM_PWR_ON_STATUS BIT(5) +#define MEM_PDA_SHIFT 8 +#define MEM_PDA_MASK 0xf +#define MEM_PDA_CPU_MASK 0x1 +#define MEM_PDA_NEON_MASK 0xf +#define CLAMP_ON BIT(15) +#define PWR_OK_SHIFT 16 +#define PWR_OK_MASK 0xf +#define PWR_ON_SHIFT 20 +#define PWR_CPU_MASK 0x03 +#define PWR_NEON_MASK 0x01 +#define PWR_ON_MASK 0xf +#define PWR_OK_STATUS_SHIFT 24 +#define PWR_OK_STATUS_MASK 0xf +#define PWR_ON_STATUS_SHIFT 28 +#define PWR_ON_STATUS_MASK 0xf + +#define ARM_CONTROL 0x30 +#define ARM_PWR_CONTROL_BASE 0x34 +#define ARM_PWR_CONTROL(x) (ARM_PWR_CONTROL_BASE + (x) * 0x4) +#define ARM_NEON_L2 0x3c + +/* Perform a value write, then spin until the value shifted by + * shift is seen, masked with mask and is different from cond. + */ +static int bpcm_wr_rd_mask(void __iomem *master, + unsigned int addr, u32 off, u32 *val, + u32 shift, u32 mask, u32 cond) +{ + int ret; + + ret = bpcm_wr(master, addr, off, *val); + if (ret) + return ret; + + do { + ret = bpcm_rd(master, addr, off, val); + if (ret) + return ret; + + cpu_relax(); + } while (((*val >> shift) & mask) != cond); + + return ret; +} + +/* Global lock to serialize accesses to the PMB registers while we + * are bringing up the secondary CPU + */ +static DEFINE_SPINLOCK(pmb_lock); + +static int bcm63xx_pmb_get_resources(struct device_node *dn, + void __iomem **base, + unsigned int *cpu, + unsigned int *addr) +{ + struct device_node *pmb_dn; + struct of_phandle_args args; + int ret; + + ret = of_property_read_u32(dn, "reg", cpu); + if (ret) { + pr_err("CPU is missing a reg node\n"); + return ret; + } + + ret = of_parse_phandle_with_args(dn, "resets", "#reset-cells", + 0, &args); + if (ret) { + pr_err("CPU is missing a resets phandle\n"); + return ret; + } + + pmb_dn = args.np; + if (args.args_count != 2) { + pr_err("reset-controller does not conform to reset-cells\n"); + return -EINVAL; + } + + *base = of_iomap(args.np, 0); + if (!*base) { + pr_err("failed remapping PMB register\n"); + return -ENOMEM; + } + + /* We do not need the number of zones */ + *addr = args.args[0]; + + return 0; +} + +int bcm63xx_pmb_power_on_cpu(struct device_node *dn) +{ + void __iomem *base; + unsigned int cpu, addr; + unsigned long flags; + u32 val, ctrl; + int ret; + + ret = bcm63xx_pmb_get_resources(dn, &base, &cpu, &addr); + if (ret) + return ret; + + /* We would not know how to enable a third and greater CPU */ + WARN_ON(cpu > 1); + + spin_lock_irqsave(&pmb_lock, flags); + + /* Check if the CPU is already on and save the ARM_CONTROL register + * value since we will use it later for CPU de-assert once done with + * the CPU-specific power sequence + */ + ret = bpcm_rd(base, addr, ARM_CONTROL, &ctrl); + if (ret) + goto out; + + if (ctrl & CPU_RESET_N(cpu)) { + pr_info("PMB: CPU%d is already powered on\n", cpu); + ret = 0; + goto out; + } + + /* Power on PLL */ + ret = bpcm_rd(base, addr, ARM_PWR_CONTROL(cpu), &val); + if (ret) + goto out; + + val |= (PWR_CPU_MASK << PWR_ON_SHIFT); + + ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val, + PWR_ON_STATUS_SHIFT, PWR_CPU_MASK, PWR_CPU_MASK); + if (ret) + goto out; + + val |= (PWR_CPU_MASK << PWR_OK_SHIFT); + + ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val, + PWR_OK_STATUS_SHIFT, PWR_CPU_MASK, PWR_CPU_MASK); + if (ret) + goto out; + + val &= ~CLAMP_ON; + + ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val); + if (ret) + goto out; + + /* Power on CPU<N> RAM */ + val &= ~(MEM_PDA_MASK << MEM_PDA_SHIFT); + + ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val); + if (ret) + goto out; + + val |= MEM_PWR_ON; + + ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val, + 0, MEM_PWR_ON_STATUS, MEM_PWR_ON_STATUS); + if (ret) + goto out; + + val |= MEM_PWR_OK; + + ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val, + 0, MEM_PWR_OK_STATUS, MEM_PWR_OK_STATUS); + if (ret) + goto out; + + val &= ~MEM_CLAMP_ON; + + ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val); + if (ret) + goto out; + + /* De-assert CPU reset */ + ctrl |= CPU_RESET_N(cpu); + + ret = bpcm_wr(base, addr, ARM_CONTROL, ctrl); +out: + spin_unlock_irqrestore(&pmb_lock, flags); + iounmap(base); + return ret; +} diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c new file mode 100644 index 0000000..3f014f1 --- /dev/null +++ b/arch/arm/mach-bcm/bcm63xx_smp.c @@ -0,0 +1,169 @@ +/* + * Broadcom BCM63138 DSL SoCs SMP support code + * + * Copyright (C) 2015, Broadcom Corporation + * + * Licensed under the terms of the GPLv2 + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/cacheflush.h> +#include <asm/smp_scu.h> +#include <asm/smp_plat.h> +#include <asm/vfp.h> + +#include "bcm63xx_smp.h" + +/* Size of mapped Cortex A9 SCU address space */ +#define CORTEX_A9_SCU_SIZE 0x58 + +/* + * Enable the Cortex A9 Snoop Control Unit + * + * By the time this is called we already know there are multiple + * cores present. We assume we're running on a Cortex A9 processor, + * so any trouble getting the base address register or getting the + * SCU base is a problem. + * + * Return 0 if successful or an error code otherwise. + */ +static int __init scu_a9_enable(void) +{ + unsigned long config_base; + void __iomem *scu_base; + unsigned int i, ncores; + + if (!scu_a9_has_base()) { + pr_err("no configuration base address register!\n"); + return -ENXIO; + } + + /* Config base address register value is zero for uniprocessor */ + config_base = scu_a9_get_base(); + if (!config_base) { + pr_err("hardware reports only one core\n"); + return -ENOENT; + } + + scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE); + if (!scu_base) { + pr_err("failed to remap config base (%lu/%u) for SCU\n", + config_base, CORTEX_A9_SCU_SIZE); + return -ENOMEM; + } + + scu_enable(scu_base); + + ncores = scu_base ? scu_get_core_count(scu_base) : 1; + + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + + /* The BCM63138 SoC has two Cortex-A9 CPUs, CPU0 features a complete + * and fully functional VFP unit that can be used, but CPU1 does not. + * Since we will not be able to trap kernel-mode NEON to force + * migration to CPU0, just do not advertise VFP support at all. + * + * This will make vfp_init bail out and do not attempt to use VFP at + * all, for kernel-mode NEON, we do not want to introduce any + * conditionals in hot-paths, so we just restrict the system to UP. + */ +#ifdef CONFIG_VFP + if (ncores > 1) { + pr_warn("SMP: secondary CPUs lack VFP unit, disabling VFP\n"); + vfp_disable(); + +#ifdef CONFIG_KERNEL_MODE_NEON + WARN(1, "SMP: kernel-mode NEON enabled, restricting to UP\n"); + ncores = 1; +#endif + } +#endif + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); + + iounmap(scu_base); /* That's the last we'll need of this */ + + return 0; +} + +static const struct of_device_id bcm63138_bootlut_ids[] = { + { .compatible = "brcm,bcm63138-bootlut", }, + { /* sentinel */ }, +}; + +#define BOOTLUT_RESET_VECT 0x20 + +static int bcm63138_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + void __iomem *bootlut_base; + struct device_node *dn; + int ret = 0; + u32 val; + + dn = of_find_matching_node(NULL, bcm63138_bootlut_ids); + if (!dn) { + pr_err("SMP: unable to find bcm63138 boot LUT node\n"); + return -ENODEV; + } + + bootlut_base = of_iomap(dn, 0); + of_node_put(dn); + + if (!bootlut_base) { + pr_err("SMP: unable to remap boot LUT base register\n"); + return -ENOMEM; + } + + /* Locate the secondary CPU node */ + dn = of_get_cpu_node(cpu_logical_map(cpu), NULL); + if (!dn) { + pr_err("SMP: failed to locate secondary CPU%d node\n", cpu); + ret = -ENODEV; + goto out; + } + + /* Write the secondary init routine to the BootLUT reset vector */ + val = virt_to_phys(bcm63138_secondary_startup); + writel_relaxed(val, bootlut_base + BOOTLUT_RESET_VECT); + + /* Power up the core, will jump straight to its reset vector when we + * return + */ + ret = bcm63xx_pmb_power_on_cpu(dn); + if (ret) + goto out; +out: + iounmap(bootlut_base); + + return ret; +} + +static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus) +{ + int ret; + + ret = scu_a9_enable(); + if (ret) { + pr_warn("SMP: Cortex-A9 SCU setup failed\n"); + return; + } +} + +struct smp_operations bcm63138_smp_ops __initdata = { + .smp_prepare_cpus = bcm63138_smp_prepare_cpus, + .smp_boot_secondary = bcm63138_smp_boot_secondary, +}; + +CPU_METHOD_OF_DECLARE(bcm63138_smp, "brcm,bcm63138", &bcm63138_smp_ops); diff --git a/arch/arm/mach-bcm/bcm63xx_smp.h b/arch/arm/mach-bcm/bcm63xx_smp.h new file mode 100644 index 0000000..50b7604 --- /dev/null +++ b/arch/arm/mach-bcm/bcm63xx_smp.h @@ -0,0 +1,9 @@ +#ifndef __BCM63XX_SMP_H +#define __BCM63XX_SMP_H + +struct device_node; + +extern void bcm63138_secondary_startup(void); +extern int bcm63xx_pmb_power_on_cpu(struct device_node *dn); + +#endif /* __BCM63XX_SMP_H */ diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c index e9bcbdb..7aef927 100644 --- a/arch/arm/mach-bcm/bcm_5301x.c +++ b/arch/arm/mach-bcm/bcm_5301x.c @@ -18,15 +18,16 @@ static bool first_fault = true; static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - if (fsr == 0x1c06 && first_fault) { + if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) { first_fault = false; /* - * These faults with code 0x1c06 happens for no good reason, - * possibly left over from the CFE boot loader. + * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens + * for no good reason, possibly left over from the CFE boot + * loader. */ pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", - addr, fsr); + addr, fsr); /* Returning non-zero causes fault display and panic */ return 0; diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 70f2f39..0f7b9ea 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -12,7 +12,6 @@ * GNU General Public License for more details. */ -#include <linux/delay.h> #include <linux/init.h> #include <linux/irqchip.h> #include <linux/of_address.h> @@ -22,97 +21,10 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#define PM_RSTC 0x1c -#define PM_RSTS 0x20 -#define PM_WDOG 0x24 - -#define PM_PASSWORD 0x5a000000 -#define PM_RSTC_WRCFG_MASK 0x00000030 -#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 -#define PM_RSTS_HADWRH_SET 0x00000040 - -#define BCM2835_PERIPH_PHYS 0x20000000 -#define BCM2835_PERIPH_VIRT 0xf0000000 -#define BCM2835_PERIPH_SIZE SZ_16M - -static void __iomem *wdt_regs; - -/* - * The machine restart method can be called from an atomic context so we won't - * be able to ioremap the regs then. - */ -static void bcm2835_setup_restart(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "brcm,bcm2835-pm-wdt"); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_regs = of_iomap(np, 0); - WARN(!wdt_regs, "failed to remap watchdog regs"); -} - -static void bcm2835_restart(enum reboot_mode mode, const char *cmd) -{ - u32 val; - - if (!wdt_regs) - return; - - /* use a timeout of 10 ticks (~150us) */ - writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG); - val = readl_relaxed(wdt_regs + PM_RSTC); - val &= ~PM_RSTC_WRCFG_MASK; - val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; - writel_relaxed(val, wdt_regs + PM_RSTC); - - /* No sleeping, possibly atomic. */ - mdelay(1); -} - -/* - * We can't really power off, but if we do the normal reset scheme, and - * indicate to bootcode.bin not to reboot, then most of the chip will be - * powered off. - */ -static void bcm2835_power_off(void) -{ - u32 val; - - /* - * We set the watchdog hard reset bit here to distinguish this reset - * from the normal (full) reset. bootcode.bin will not reboot after a - * hard reset. - */ - val = readl_relaxed(wdt_regs + PM_RSTS); - val &= ~PM_RSTC_WRCFG_MASK; - val |= PM_PASSWORD | PM_RSTS_HADWRH_SET; - writel_relaxed(val, wdt_regs + PM_RSTS); - - /* Continue with normal reset mechanism */ - bcm2835_restart(REBOOT_HARD, ""); -} - -static struct map_desc io_map __initdata = { - .virtual = BCM2835_PERIPH_VIRT, - .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS), - .length = BCM2835_PERIPH_SIZE, - .type = MT_DEVICE -}; - -static void __init bcm2835_map_io(void) -{ - iotable_init(&io_map, 1); -} - static void __init bcm2835_init(void) { int ret; - bcm2835_setup_restart(); - if (wdt_regs) - pm_power_off = bcm2835_power_off; - bcm2835_init_clocks(); ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, @@ -129,9 +41,6 @@ static const char * const bcm2835_compat[] = { }; DT_MACHINE_START(BCM2835, "BCM2835") - .map_io = bcm2835_map_io, - .init_irq = irqchip_init, .init_machine = bcm2835_init, - .restart = bcm2835_restart, .dt_compat = bcm2835_compat MACHINE_END diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h deleted file mode 100644 index ec0c3d1..0000000 --- a/arch/arm/mach-bcm/brcmstb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __BRCMSTB_H__ -#define __BRCMSTB_H__ - -void brcmstb_secondary_startup(void); - -#endif /* __BRCMSTB_H__ */ diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S deleted file mode 100644 index 199c1ea..0000000 --- a/arch/arm/mach-bcm/headsmp-brcmstb.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * SMP boot code for secondary CPUs - * Based on arch/arm/mach-tegra/headsmp.S - * - * Copyright (C) 2010 NVIDIA, Inc. - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <asm/assembler.h> -#include <linux/linkage.h> -#include <linux/init.h> - - .section ".text.head", "ax" - -ENTRY(brcmstb_secondary_startup) - /* - * Ensure CPU is in a sane state by disabling all IRQs and switching - * into SVC mode. - */ - setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 - - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(brcmstb_secondary_startup) diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c index e209e6f..44d6bddf 100644 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -30,8 +30,6 @@ #include <asm/mach-types.h> #include <asm/smp_plat.h> -#include "brcmstb.h" - enum { ZONE_MAN_CLKEN_MASK = BIT(0), ZONE_MAN_RESET_CNTL_MASK = BIT(1), @@ -153,7 +151,7 @@ static void brcmstb_cpu_boot(u32 cpu) * Set the reset vector to point to the secondary_startup * routine */ - cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); + cpu_set_boot_addr(cpu, virt_to_phys(secondary_startup)); /* Unhalt the cpu */ cpu_rst_cfg_set(cpu, 0); |