diff options
Diffstat (limited to 'arch/arm/mach-imx/mach-mx27_3ds.c')
-rw-r--r-- | arch/arm/mach-imx/mach-mx27_3ds.c | 44 |
1 files changed, 32 insertions, 12 deletions
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 117ce0a..b31d412 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -42,10 +42,12 @@ #include "devices-imx27.h" -#define SD1_EN_GPIO (GPIO_PORTB + 25) -#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23) -#define SPI2_SS0 (GPIO_PORTD + 21) -#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTC + 28) +#define SD1_EN_GPIO IMX_GPIO_NR(2, 25) +#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) +#define SPI2_SS0 IMX_GPIO_NR(4, 21) +#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) +#define PMIC_INT IMX_GPIO_NR(3, 14) +#define SD1_CD IMX_GPIO_NR(2, 26) static const int mx27pdk_pins[] __initconst = { /* UART1 */ @@ -98,9 +100,12 @@ static const int mx27pdk_pins[] __initconst = { PD22_PF_CSPI2_SCLK, PD23_PF_CSPI2_MISO, PD24_PF_CSPI2_MOSI, + SPI2_SS0 | GPIO_GPIO | GPIO_OUT, /* I2C1 */ PD17_PF_I2C_DATA, PD18_PF_I2C_CLK, + /* PMIC INT */ + PMIC_INT | GPIO_GPIO | GPIO_IN, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -131,13 +136,13 @@ static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = { static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); + return request_irq(gpio_to_irq(SD1_CD), detect_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); } static void mx27_3ds_sdhc1_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOB(26), data); + free_irq(gpio_to_irq(SD1_CD), data); } static const struct imxmmc_platform_data sdhc1_pdata __initconst = { @@ -193,6 +198,13 @@ static int __init mx27_3ds_otg_mode(char *options) __setup("otg_mode=", mx27_3ds_otg_mode); /* Regulators */ +static struct regulator_init_data gpo_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + } +}; + static struct regulator_consumer_supply vmmc1_consumers[] = { REGULATOR_SUPPLY("lcd_2v8", NULL), }; @@ -201,7 +213,9 @@ static struct regulator_init_data vmmc1_init = { .constraints = { .min_uV = 2800000, .max_uV = 2800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), .consumer_supplies = vmmc1_consumers, @@ -228,6 +242,12 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }, { .id = MC13783_REG_VGEN, .init_data = &vgen_init, + }, { + .id = MC13783_REG_GPO1, /* Turn on 1.8V */ + .init_data = &gpo_init, + }, { + .id = MC13783_REG_GPO3, /* Turn on 3.3V */ + .init_data = &gpo_init, }, }; @@ -242,11 +262,11 @@ static struct mc13xxx_platform_data mc13783_pdata = { }; /* SPI */ -static int spi2_internal_chipselect[] = {SPI2_SS0}; +static int spi2_chipselect[] = {SPI2_SS0}; static const struct spi_imx_master spi2_pdata __initconst = { - .chipselect = spi2_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi2_internal_chipselect), + .chipselect = spi2_chipselect, + .num_chipselect = ARRAY_SIZE(spi2_chipselect), }; static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { @@ -256,7 +276,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { .bus_num = 1, .chip_select = 0, /* SS0 */ .platform_data = &mc13783_pdata, - .irq = IRQ_GPIOC(14), + .irq = gpio_to_irq(PMIC_INT), .mode = SPI_CS_HIGH, }, }; |