1 files changed, 0 insertions, 142 deletions
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
deleted file mode 100644
index e1267d6..0000000
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- *
- * QNAP TS-11x/TS-21x Turbo NAS Board Setup
- *
- * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx1x-common.h"
-
-static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
-	I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data qnap_ts219_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct gpio_keys_button qnap_ts219_buttons[] = {
-	{
-		.code		= KEY_COPY,
-		.gpio		= 15,
-		.desc		= "USB Copy",
-		.active_low	= 1,
-	},
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 16,
-		.desc		= "Reset",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data qnap_ts219_button_data = {
-	.buttons	= qnap_ts219_buttons,
-	.nbuttons	= ARRAY_SIZE(qnap_ts219_buttons),
-};
-
-static struct platform_device qnap_ts219_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &qnap_ts219_button_data,
-	}
-};
-
-static unsigned int qnap_ts219_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_SATA1_ACTn,
-	MPP5_SATA0_ACTn,
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP13_UART1_TXD,	/* PIC controller */
-	MPP14_UART1_RXD,	/* PIC controller */
-	MPP15_GPIO,		/* USB Copy button (on devices with 88F6281) */
-	MPP16_GPIO,		/* Reset button (on devices with 88F6281) */
-	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
-	MPP37_GPIO,		/* Reset button (on devices with 88F6282) */
-	MPP43_GPIO,		/* USB Copy button (on devices with 88F6282) */
-	MPP44_GPIO,		/* Board ID: 0: TS-11x, 1: TS-21x */
-	0
-};
-
-static void __init qnap_ts219_init(void)
-{
-	u32 dev, rev;
-
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(qnap_ts219_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_uart1_init(); /* A PIC controller is connected here. */
-	qnap_tsx1x_register_flash();
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
-
-	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6282_DEV_ID) {
-		qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
-		qnap_ts219_buttons[1].gpio = 37; /* Reset button */
-		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-	}
-
-	kirkwood_ge00_init(&qnap_ts219_ge00_data);
-	kirkwood_sata_init(&qnap_ts219_sata_data);
-	kirkwood_ehci_init();
-	platform_device_register(&qnap_ts219_button_device);
-
-	pm_power_off = qnap_tsx1x_power_off;
-
-}
-
-static int __init ts219_pci_init(void)
-{
-	if (machine_is_ts219())
-		kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(ts219_pci_init);
-
-MACHINE_START(TS219, "QNAP TS-119/TS-219")
-	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= qnap_ts219_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END