summaryrefslogtreecommitdiff
path: root/arch/arm/mach-kirkwood
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-kirkwood')
-rw-r--r--arch/arm/mach-kirkwood/Makefile2
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c96
-rw-r--r--arch/arm/mach-kirkwood/common.c1
-rw-r--r--arch/arm/mach-kirkwood/common.h6
-rw-r--r--arch/arm/mach-kirkwood/include/mach/bridge-regs.h2
-rw-r--r--arch/arm/mach-kirkwood/pm.c73
6 files changed, 165 insertions, 15 deletions
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d1f8e3d..144b511 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,5 +1,7 @@
obj-y += common.o pcie.o
obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o
+obj-$(CONFIG_PM) += pm.o
+
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index a32a3e5..c9f6fd2 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -13,6 +13,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <linux/dma-mapping.h>
@@ -43,14 +45,6 @@ static void __init kirkwood_legacy_clk_init(void)
clkspec.np = np;
clkspec.args_count = 1;
- clkspec.args[0] = CGC_BIT_PEX0;
- orion_clkdev_add("0", "pcie",
- of_clk_get_from_provider(&clkspec));
-
- clkspec.args[0] = CGC_BIT_PEX1;
- orion_clkdev_add("1", "pcie",
- of_clk_get_from_provider(&clkspec));
-
/*
* The ethernet interfaces forget the MAC address assigned by
* u-boot if the clocks are turned off. Until proper DT support
@@ -65,11 +59,83 @@ static void __init kirkwood_legacy_clk_init(void)
clk_prepare_enable(clk);
}
-static void __init kirkwood_dt_init_early(void)
+#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
{
- mvebu_mbus_init("marvell,kirkwood-mbus",
- BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
- DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
+ struct device_node *np;
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by u-boot
+ * if the clocks are turned off. Usually, u-boot on kirkwood boards
+ * has no DT support to properly set local-mac-address property.
+ * As a workaround, we get the MAC address from mv643xx_eth registers
+ * and update the port device node if no valid MAC address is set.
+ */
+ for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+ struct device_node *pnp = of_get_parent(np);
+ struct clk *clk;
+ struct property *pmac;
+ void __iomem *io;
+ u8 *macaddr;
+ u32 reg;
+
+ if (!pnp)
+ continue;
+
+ /* skip disabled nodes or nodes with valid MAC address*/
+ if (!of_device_is_available(pnp) || of_get_mac_address(np))
+ goto eth_fixup_skip;
+
+ clk = of_clk_get(pnp, 0);
+ if (IS_ERR(clk))
+ goto eth_fixup_skip;
+
+ io = of_iomap(pnp, 0);
+ if (!io)
+ goto eth_fixup_no_map;
+
+ /* ensure port clock is not gated to not hang CPU */
+ clk_prepare_enable(clk);
+
+ /* store MAC address register contents in local-mac-address */
+ pr_err(FW_INFO "%s: local-mac-address is not set\n",
+ np->full_name);
+
+ pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+ if (!pmac)
+ goto eth_fixup_no_mem;
+
+ pmac->value = pmac + 1;
+ pmac->length = 6;
+ pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (!pmac->name) {
+ kfree(pmac);
+ goto eth_fixup_no_mem;
+ }
+
+ macaddr = pmac->value;
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+ macaddr[0] = (reg >> 24) & 0xff;
+ macaddr[1] = (reg >> 16) & 0xff;
+ macaddr[2] = (reg >> 8) & 0xff;
+ macaddr[3] = reg & 0xff;
+
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+ macaddr[4] = (reg >> 8) & 0xff;
+ macaddr[5] = reg & 0xff;
+
+ of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+ iounmap(io);
+ clk_disable_unprepare(clk);
+eth_fixup_no_map:
+ clk_put(clk);
+eth_fixup_skip:
+ of_node_put(pnp);
+ }
}
static void __init kirkwood_dt_init(void)
@@ -90,11 +156,12 @@ static void __init kirkwood_dt_init(void)
kirkwood_l2_init();
kirkwood_cpufreq_init();
-
+ kirkwood_cpuidle_init();
/* Setup clocks for legacy devices */
kirkwood_legacy_clk_init();
- kirkwood_cpuidle_init();
+ kirkwood_pm_init();
+ kirkwood_dt_eth_fixup();
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
@@ -114,7 +181,6 @@ static const char * const kirkwood_dt_board_compat[] = {
DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
.map_io = kirkwood_map_io,
- .init_early = kirkwood_dt_init_early,
.init_machine = kirkwood_dt_init,
.restart = kirkwood_restart,
.dt_compat = kirkwood_dt_board_compat,
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 1767611..f3407a5 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -721,6 +721,7 @@ void __init kirkwood_init(void)
kirkwood_xor1_init();
kirkwood_crypto_init();
+ kirkwood_pm_init();
kirkwood_cpuidle_init();
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 1296de9..05fd648 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -58,6 +58,12 @@ void kirkwood_cpufreq_init(void);
void kirkwood_restart(enum reboot_mode, const char *);
void kirkwood_clk_init(void);
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
/* board init functions for boards not fully converted to fdt */
#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
void mv88f6281gtw_ge_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 91242c9..8b9d1c9 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -78,4 +78,6 @@
#define CGC_TDM (1 << 20)
#define CGC_RESERVED (0x6 << 21)
+#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
+
#endif
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
new file mode 100644
index 0000000..8783a71
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pm.c
@@ -0,0 +1,73 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/bridge-regs.h>
+
+static void __iomem *ddr_operation_base;
+
+static void kirkwood_low_power(void)
+{
+ u32 mem_pm_ctrl;
+
+ mem_pm_ctrl = readl(MEMORY_PM_CTRL);
+
+ /* Set peripherals to low-power mode */
+ writel_relaxed(~0, MEMORY_PM_CTRL);
+
+ /* Set DDR in self-refresh */
+ writel_relaxed(0x7, ddr_operation_base);
+
+ /*
+ * Set CPU in wait-for-interrupt state.
+ * This disables the CPU core clocks,
+ * the array clocks, and also the L2 controller.
+ */
+ cpu_do_idle();
+
+ writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ kirkwood_low_power();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+ return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+ .enter = kirkwood_suspend_enter,
+ .valid = kirkwood_pm_valid_standby,
+};
+
+int __init kirkwood_pm_init(void)
+{
+ ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+ suspend_set_ops(&kirkwood_suspend_ops);
+ return 0;
+}