diff options
Diffstat (limited to 'arch/arm/mach-mvebu')
-rw-r--r-- | arch/arm/mach-mvebu/Kconfig | 19 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/include/mach/bridge-regs.h | 85 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/include/mach/kirkwood.h | 142 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/kirkwood-pm.c | 76 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/kirkwood-pm.h | 26 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/kirkwood.c | 209 |
7 files changed, 557 insertions, 1 deletions
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 6c0824e..2d7af55 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,5 +1,5 @@ config ARCH_MVEBU - bool "Marvell Engineering Business Unit (MVEBU) SoCs" if ARCH_MULTI_V7 + bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5) select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select COMMON_CLK @@ -46,6 +46,23 @@ config MACH_ARMADA_XP Say 'Y' here if you want your kernel to support boards based on the Marvell Armada XP SoC with device tree. +config MACH_KIRKWOOD + bool "Marvell Kirkwood boards" if ARCH_MULTI_V5 + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON + select KIRKWOOD_CLK + select OF_IRQ + select ORION_IRQCHIP + select ORION_TIMER + select PCI + select PCI_QUIRKS + select PINCTRL_KIRKWOOD + select USE_OF + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Kirkwood device tree. + endmenu endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index d998461..6809ec7 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -7,3 +7,4 @@ obj-y += coherency.o coherency_ll.o pmsu.o system-controller.o mvebu-soc-id. obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o diff --git a/arch/arm/mach-mvebu/include/mach/bridge-regs.h b/arch/arm/mach-mvebu/include/mach/bridge-regs.h new file mode 100644 index 0000000..6eb8fea --- /dev/null +++ b/arch/arm/mach-mvebu/include/mach/bridge-regs.h @@ -0,0 +1,85 @@ +/* + * arch/arm/mach-mvebu/include/mach/bridge-regs.h + * + * Mbus-L to Mbus Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include <mach/kirkwood.h> + +#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100) +#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) +#define CPU_CONFIG_ERROR_PROP 0x00000004 + +#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) +#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104) +#define CPU_RESET 0x00000002 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110) + +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) +#define IRQ_CAUSE_LOW_OFF 0x0000 +#define IRQ_MASK_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) + +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128) +#define L2_WRITETHROUGH 0x00000010 + +#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c) +#define CGC_BIT_GE0 (0) +#define CGC_BIT_PEX0 (2) +#define CGC_BIT_USB0 (3) +#define CGC_BIT_SDIO (4) +#define CGC_BIT_TSU (5) +#define CGC_BIT_DUNIT (6) +#define CGC_BIT_RUNIT (7) +#define CGC_BIT_XOR0 (8) +#define CGC_BIT_AUDIO (9) +#define CGC_BIT_SATA0 (14) +#define CGC_BIT_SATA1 (15) +#define CGC_BIT_XOR1 (16) +#define CGC_BIT_CRYPTO (17) +#define CGC_BIT_PEX1 (18) +#define CGC_BIT_GE1 (19) +#define CGC_BIT_TDM (20) +#define CGC_GE0 (1 << 0) +#define CGC_PEX0 (1 << 2) +#define CGC_USB0 (1 << 3) +#define CGC_SDIO (1 << 4) +#define CGC_TSU (1 << 5) +#define CGC_DUNIT (1 << 6) +#define CGC_RUNIT (1 << 7) +#define CGC_XOR0 (1 << 8) +#define CGC_AUDIO (1 << 9) +#define CGC_POWERSAVE (1 << 11) +#define CGC_SATA0 (1 << 14) +#define CGC_SATA1 (1 << 15) +#define CGC_XOR1 (1 << 16) +#define CGC_CRYPTO (1 << 17) +#define CGC_PEX1 (1 << 18) +#define CGC_GE1 (1 << 19) +#define CGC_TDM (1 << 20) +#define CGC_RESERVED (0x6 << 21) + +#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118) +#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118) + +#endif diff --git a/arch/arm/mach-mvebu/include/mach/kirkwood.h b/arch/arm/mach-mvebu/include/mach/kirkwood.h new file mode 100644 index 0000000..9d966dc --- /dev/null +++ b/arch/arm/mach-mvebu/include/mach/kirkwood.h @@ -0,0 +1,142 @@ +/* + * arch/arm/mach-mvebu/include/mach/kirkwood.h + * + * Generic definitions for Marvell Kirkwood SoC flavors: + * 88F6180, 88F6192 and 88F6281. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_KIRKWOOD_H +#define __ASM_ARCH_KIRKWOOD_H + +/* + * Marvell Kirkwood address maps. + * + * phys + * e0000000 PCIe #0 Memory space + * e8000000 PCIe #1 Memory space + * f1000000 on-chip peripheral registers + * f2000000 PCIe #0 I/O space + * f3000000 PCIe #1 I/O space + * f4000000 NAND controller address window + * f5000000 Security Accelerator SRAM + * + * virt phys size + * fed00000 f1000000 1M on-chip peripheral registers + * fee00000 f2000000 1M PCIe #0 I/O space + * fef00000 f3000000 1M PCIe #1 I/O space + */ + +#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000 +#define KIRKWOOD_SRAM_SIZE SZ_2K + +#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000 +#define KIRKWOOD_NAND_MEM_SIZE SZ_1K + +#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000 +#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000 +#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K + +#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 +#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 +#define KIRKWOOD_PCIE_IO_SIZE SZ_64K + +#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 +#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000) +#define KIRKWOOD_REGS_SIZE SZ_1M + +#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 +#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000 +#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M + +#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000 +#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000 +#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M + +/* + * Register Map + */ +#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) +#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) +#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500) +#define DDR_WINDOW_CPU_SZ (0x20) +#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) + +#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) +#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000) +#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030) +#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034) +#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) +#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140) +#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300) +#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600) +#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) + +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) +#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE) +#define BRIDGE_WINS_SZ (0x80) + +#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000) + +#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000) +#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70) +#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04) +#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000) +#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70) +#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04) + +#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000) + +#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800) +#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800) +#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900) +#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900) +#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00) +#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00) +#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00) +#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00) + +#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000) +#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000) + +#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000) +#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000) +#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050) +#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330) +#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050) +#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330) + +#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000) + +#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000) +#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000) + +/* + * Supported devices and revisions. + */ +#define MV88F6281_DEV_ID 0x6281 +#define MV88F6281_REV_Z0 0 +#define MV88F6281_REV_A0 2 +#define MV88F6281_REV_A1 3 + +#define MV88F6192_DEV_ID 0x6192 +#define MV88F6192_REV_Z0 0 +#define MV88F6192_REV_A0 2 +#define MV88F6192_REV_A1 3 + +#define MV88F6180_DEV_ID 0x6180 +#define MV88F6180_REV_A0 2 +#define MV88F6180_REV_A1 3 + +#define MV88F6282_DEV_ID 0x6282 +#define MV88F6282_REV_A0 0 +#define MV88F6282_REV_A1 1 +#endif diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c new file mode 100644 index 0000000..b8c8365 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood-pm.c @@ -0,0 +1,76 @@ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, + * version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> +#include <mach/bridge-regs.h> + +static void __iomem *ddr_operation_base; +static void __iomem *memory_pm_ctrl; + +static void kirkwood_low_power(void) +{ + u32 mem_pm_ctrl; + + mem_pm_ctrl = readl(memory_pm_ctrl); + + /* Set peripherals to low-power mode */ + writel_relaxed(~0, memory_pm_ctrl); + + /* Set DDR in self-refresh */ + writel_relaxed(0x7, ddr_operation_base); + + /* + * Set CPU in wait-for-interrupt state. + * This disables the CPU core clocks, + * the array clocks, and also the L2 controller. + */ + cpu_do_idle(); + + writel_relaxed(mem_pm_ctrl, memory_pm_ctrl); +} + +static int kirkwood_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + kirkwood_low_power(); + break; + default: + return -EINVAL; + } + return 0; +} + +static int kirkwood_pm_valid_standby(suspend_state_t state) +{ + return state == PM_SUSPEND_STANDBY; +} + +static const struct platform_suspend_ops kirkwood_suspend_ops = { + .enter = kirkwood_suspend_enter, + .valid = kirkwood_pm_valid_standby, +}; + +int __init kirkwood_pm_init(void) +{ + ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); + memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4); + + suspend_set_ops(&kirkwood_suspend_ops); + return 0; +} diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h new file mode 100644 index 0000000..21e7530 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood-pm.h @@ -0,0 +1,26 @@ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, + * version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_KIRKWOOD_PM_H +#define __ARCH_KIRKWOOD_PM_H + +#ifdef CONFIG_PM +void kirkwood_pm_init(void); +#else +static inline void kirkwood_pm_init(void) {}; +#endif + +#endif diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c new file mode 100644 index 0000000..6e754a3 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -0,0 +1,209 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-mvebu/kirkwood.c + * + * Flattened Device Tree board initialization + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_net.h> +#include <linux/of_platform.h> +#include <linux/dma-mapping.h> +#include <linux/irqchip.h> +#include <linux/kexec.h> +#include <asm/hardware/cache-feroceon-l2.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/bridge-regs.h> +#include <plat/common.h> +#include <plat/pcie.h> +#include "kirkwood-pm.h" + +static struct resource kirkwood_cpufreq_resources[] = { + [0] = { + .start = CPU_CONTROL_PHYS, + .end = CPU_CONTROL_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_cpufreq_device = { + .name = "kirkwood-cpufreq", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), + .resource = kirkwood_cpufreq_resources, +}; + +static void __init kirkwood_cpufreq_init(void) +{ + platform_device_register(&kirkwood_cpufreq_device); +} + +static struct resource kirkwood_cpuidle_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = DDR_OPERATION_BASE, + .end = DDR_OPERATION_BASE + 3, + }, +}; + +static struct platform_device kirkwood_cpuidle = { + .name = "kirkwood_cpuidle", + .id = -1, + .resource = kirkwood_cpuidle_resource, + .num_resources = 1, +}; + +static void __init kirkwood_cpuidle_init(void) +{ + platform_device_register(&kirkwood_cpuidle); +} + +/* Temporary here since mach-mvebu has a function we can use */ +static void kirkwood_restart(enum reboot_mode mode, const char *cmd) +{ + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); + + /* + * Assert soft reset. + */ + writel(SOFT_RESET, SYSTEM_SOFT_RESET); + + while (1) + ; +} + +#define MV643XX_ETH_MAC_ADDR_LOW 0x0414 +#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 + +static void __init kirkwood_dt_eth_fixup(void) +{ + struct device_node *np; + + /* + * The ethernet interfaces forget the MAC address assigned by u-boot + * if the clocks are turned off. Usually, u-boot on kirkwood boards + * has no DT support to properly set local-mac-address property. + * As a workaround, we get the MAC address from mv643xx_eth registers + * and update the port device node if no valid MAC address is set. + */ + for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") { + struct device_node *pnp = of_get_parent(np); + struct clk *clk; + struct property *pmac; + void __iomem *io; + u8 *macaddr; + u32 reg; + + if (!pnp) + continue; + + /* skip disabled nodes or nodes with valid MAC address*/ + if (!of_device_is_available(pnp) || of_get_mac_address(np)) + goto eth_fixup_skip; + + clk = of_clk_get(pnp, 0); + if (IS_ERR(clk)) + goto eth_fixup_skip; + + io = of_iomap(pnp, 0); + if (!io) + goto eth_fixup_no_map; + + /* ensure port clock is not gated to not hang CPU */ + clk_prepare_enable(clk); + + /* store MAC address register contents in local-mac-address */ + pr_err(FW_INFO "%s: local-mac-address is not set\n", + np->full_name); + + pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); + if (!pmac) + goto eth_fixup_no_mem; + + pmac->value = pmac + 1; + pmac->length = 6; + pmac->name = kstrdup("local-mac-address", GFP_KERNEL); + if (!pmac->name) { + kfree(pmac); + goto eth_fixup_no_mem; + } + + macaddr = pmac->value; + reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH); + macaddr[0] = (reg >> 24) & 0xff; + macaddr[1] = (reg >> 16) & 0xff; + macaddr[2] = (reg >> 8) & 0xff; + macaddr[3] = reg & 0xff; + + reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW); + macaddr[4] = (reg >> 8) & 0xff; + macaddr[5] = reg & 0xff; + + of_update_property(np, pmac); + +eth_fixup_no_mem: + iounmap(io); + clk_disable_unprepare(clk); +eth_fixup_no_map: + clk_put(clk); +eth_fixup_skip: + of_node_put(pnp); + } +} + +/* + * Disable propagation of mbus errors to the CPU local bus, as this + * causes mbus errors (which can occur for example for PCI aborts) to + * throw CPU aborts, which we're not set up to deal with. + */ +void kirkwood_disable_mbus_error_propagation(void) +{ + void __iomem *cpu_config; + + cpu_config = ioremap(CPU_CONFIG_PHYS, 4); + writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); +} + + +static void __init kirkwood_dt_init(void) +{ + kirkwood_disable_mbus_error_propagation(); + + BUG_ON(mvebu_mbus_dt_init()); + +#ifdef CONFIG_CACHE_FEROCEON_L2 + feroceon_of_init(); +#endif + kirkwood_cpufreq_init(); + kirkwood_cpuidle_init(); + + kirkwood_pm_init(); + kirkwood_dt_eth_fixup(); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const kirkwood_dt_board_compat[] = { + "marvell,kirkwood", + NULL +}; + +DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") + /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ + .init_machine = kirkwood_dt_init, + .restart = kirkwood_restart, + .dt_compat = kirkwood_dt_board_compat, +MACHINE_END |