1 files changed, 27 insertions, 19 deletions

diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index b752f6b..f07d3bd 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -533,17 +533,25 @@ static struct platform_device pcm970_sja1000 = {
 	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
-#if defined(CONFIG_USB_ULPI)
+static int pcm037_otg_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.init	= pcm037_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
+static int pcm037_usbh2_init(struct platform_device *pdev)
+{
+	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init	= pcm037_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -568,7 +576,7 @@ __setup("otg_mode=", pcm037_otg_mode);
 /*
  * Board specific initialization.
  */
-static void __init mxc_board_init(void)
+static void __init pcm037_init(void)
 {
 	int ret;
 
@@ -646,19 +654,18 @@ static void __init mxc_board_init(void)
 
 	platform_device_register(&pcm970_sja1000);
 
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-		imx31_add_mxc_ehci_otg(&otg_pdata);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx31_add_mxc_ehci_otg(&otg_pdata);
 	}
 
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 
-	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
 	if (!otg_mode_host)
 		imx31_add_fsl_usb2_udc(&otg_device_pdata);
 
@@ -675,9 +682,10 @@ struct sys_timer pcm037_timer = {
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &pcm037_timer,
+	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.map_io = mx31_map_io,
+	.init_early = imx31_init_early,
+	.init_irq = mx31_init_irq,
+	.timer = &pcm037_timer,
+	.init_machine = pcm037_init,
 MACHINE_END