diff options
Diffstat (limited to 'arch/arm/mach-omap1')
62 files changed, 1764 insertions, 157 deletions
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index cd169c3..f0e69cb 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o +obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ + serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index e255164..a8fce3c 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -625,7 +625,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .atag_offset = 0x100, .map_io = ams_delta_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .init_late = ams_delta_init_late, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 4b6de70..560a7dc 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -27,16 +27,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> #include <mach/flash.h> -#include <plat/fpga.h> #include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" /* fsample is pretty close to p2-sample */ @@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = { static void __init fsample_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -307,8 +307,7 @@ static void __init omap_fsample_init(void) fsample_init_smc91x(); - if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); @@ -362,7 +361,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .atag_offset = 0x100, .map_io = omap_fsample_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 4ec579f..608e7d2 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index e1362ce..7119ef2 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -13,12 +13,11 @@ */ #include <linux/gpio.h> #include <linux/platform_device.h> - +#include <linux/platform_data/gpio-omap.h> #include <linux/i2c/tps65010.h> -#include <plat/mmc.h> - #include "board-h2.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 376f7f2..2274bd6 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -39,8 +39,8 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <linux/omap-dma.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> #include <mach/flash.h> @@ -50,6 +50,7 @@ #include "common.h" #include "board-h2.h" +#include "dma.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 @@ -411,8 +412,7 @@ static void __init h2_init(void) h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; h2_nand_resource.end += SZ_4K - 1; - if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); @@ -458,7 +458,6 @@ MACHINE_START(OMAP_H2, "TI-H2") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h2_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index c74daac..17d7791 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,9 +16,8 @@ #include <linux/i2c/tps65010.h> -#include <plat/mmc.h> - #include "board-h3.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ededdb7..1051935 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -41,9 +41,9 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/dma.h> +#include <linux/omap-dma.h> #include <mach/flash.h> #include <mach/hardware.h> @@ -406,8 +406,7 @@ static void __init h3_init(void) nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; nand_resource.end += SZ_4K - 1; - if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ @@ -452,7 +451,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = h3_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 87ab208..356f816 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -43,7 +43,7 @@ #include <asm/mach/arch.h> #include <mach/omap7xx.h> -#include <plat/mmc.h> +#include "mmc.h" #include <mach/irqs.h> #include <mach/usb.h> @@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald") .atag_offset = 0x100, .map_io = htcherald_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = htcherald_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index db5f7d2..f8033fa 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -33,16 +33,15 @@ #include <mach/mux.h> #include <mach/flash.h> -#include <plat/fpga.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/mmc.h> #include <mach/hardware.h> #include <mach/usb.h> #include "iomap.h" #include "common.h" +#include "mmc.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 @@ -215,7 +214,7 @@ static struct platform_device *innovator1510_devices[] __initdata = { static int innovator_get_pendown_state(void) { - return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); + return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); } static const struct ads7846_platform_data innovator1510_ts_info = { @@ -279,7 +278,7 @@ static struct platform_device *innovator1610_devices[] __initdata = { static void __init innovator_init_smc91x(void) { if (cpu_is_omap1510()) { - fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1, + __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1, OMAP1510_FPGA_RST); udelay(750); } else { @@ -335,10 +334,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { if (power_on) - fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3), + __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3), OMAP1510_FPGA_POWER); else - fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3), + __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3), OMAP1510_FPGA_POWER); return 0; @@ -390,14 +389,14 @@ static void __init innovator_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - reg = fpga_read(OMAP1510_FPGA_POWER); + reg = __raw_readb(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); + __raw_writeb(reg, OMAP1510_FPGA_POWER); udelay(10); - reg = fpga_read(OMAP1510_FPGA_POWER); + reg = __raw_readb(OMAP1510_FPGA_POWER); reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); + __raw_writeb(reg, OMAP1510_FPGA_POWER); udelay(10); platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); @@ -437,6 +436,7 @@ static void __init innovator_init(void) */ static void __init innovator_map_io(void) { +#ifdef CONFIG_ARCH_OMAP15XX omap15xx_map_io(); iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); @@ -444,9 +444,10 @@ static void __init innovator_map_io(void) /* Dump the Innovator FPGA rev early - useful info for support. */ pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", - fpga_read(OMAP1510_FPGA_REV_HIGH), - fpga_read(OMAP1510_FPGA_REV_LOW), - fpga_read(OMAP1510_FPGA_BOARD_REV)); + __raw_readb(OMAP1510_FPGA_REV_HIGH), + __raw_readb(OMAP1510_FPGA_REV_LOW), + __raw_readb(OMAP1510_FPGA_BOARD_REV)); +#endif } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") @@ -454,7 +455,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .atag_offset = 0x100, .map_io = innovator_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = innovator_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7d5c06d..24d2f2d 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -29,13 +29,13 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/mmc.h> -#include <plat/clock.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" +#include "clock.h" +#include "mmc.h" #define ADS7846_PENDOWN_GPIO 15 @@ -112,17 +112,6 @@ static void __init mipid_dev_init(void) omapfb_set_lcd_config(&nokia770_lcd_config); } -static void __init ads7846_dev_init(void) -{ - if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ADS7846_PENDOWN_GPIO); -} - static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -131,7 +120,7 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = .debounce_max = 10, .debounce_tol = 3, .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, + .gpio_pendown = ADS7846_PENDOWN_GPIO, }; static struct spi_board_info nokia770_spi_board_info[] __initdata = { @@ -241,7 +230,6 @@ static void __init omap_nokia770_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); hwa742_dev_init(); - ads7846_dev_init(); mipid_dev_init(); omap1_usb_init(&nokia770_usb_config); nokia770_mmc_init(); @@ -251,7 +239,6 @@ MACHINE_START(NOKIA770, "Nokia 770") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 5973945..872ea47 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -48,7 +48,7 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .atag_offset = 0x100, .map_io = omap16xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = osk_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 1c578d5..c33dceb 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -36,8 +36,8 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> -#include <plat/dma.h> +#include <mach/tc.h> +#include <linux/omap-dma.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 @@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 9715809..2948b0e 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -28,16 +28,16 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/platform_data/omap1_bl.h> +#include <linux/platform_data/leds-omap.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/led.h> #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <linux/omap-dma.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 @@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e311032..7a05895 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -38,8 +38,8 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <linux/omap-dma.h> +#include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -47,6 +47,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 @@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 198b054..27f8d12 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -28,15 +28,15 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/fpga.h> #include <mach/flash.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" static const unsigned int p2_keymap[] = { KEY(0, 0, KEY_UP), @@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = { static void __init perseus2_init_smc91x(void) { - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, H2P2_DBG_FPGA_LAN_RESET); mdelay(50); } @@ -275,8 +275,7 @@ static void __init omap_perseus2_init(void) perseus2_init_smc91x(); - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(P2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); @@ -324,7 +323,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .atag_offset = 0x100, .map_io = omap_perseus2_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 5932d56..4fcf19c 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -16,9 +16,10 @@ #include <linux/platform_device.h> #include <mach/hardware.h> -#include <plat/mmc.h> #include <mach/board-sx1.h> +#include "mmc.h" + #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static int mmc_set_power(struct device *dev, int slot, int power_on, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 13bf2cc..20ed52a 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -36,15 +36,16 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <linux/omap-dma.h> #include <mach/irda.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/board-sx1.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" +#include "dma.h" /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) @@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index ad75e34..abf705f 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -34,7 +34,7 @@ #include <mach/board-voiceblue.h> #include <mach/flash.h> #include <mach/mux.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/hardware.h> #include <mach/usb.h> @@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, - .reserve = omap_reserve, .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .init_late = omap1_init_late, diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 638f407..4f5fd4a 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> @@ -21,21 +22,21 @@ #include <asm/mach-types.h> -#include <plat/cpu.h> -#include <plat/usb.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/clkdev_omap.h> - #include <mach/hardware.h> +#include "soc.h" #include "iomap.h" #include "clock.h" #include "opp.h" +#include "sram.h" __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clockfw_lock); + /* * Omap1 specific clock functions */ @@ -607,3 +608,497 @@ void omap1_clk_disable_unused(struct clk *clk) } #endif + + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->usecount == 0) { + pr_err("Trying disable clock %s with 0 usecount\n", + clk->name); + WARN_ON(1); + goto out; + } + + omap1_clk_disable(clk); + +out: + spin_unlock_irqrestore(&clockfw_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = clk->rate; + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_get_rate); + +/* + * Optional clock functions defined in include/linux/clk.h + */ + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + long ret; + + if (clk == NULL || IS_ERR(clk)) + return 0; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_round_rate(clk, rate); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + spin_lock_irqsave(&clockfw_lock, flags); + ret = omap1_clk_set_rate(clk, rate); + if (ret == 0) + propagate_rate(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n"); + + return -EINVAL; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +/* + * OMAP specific clock functions shared between omap1 and omap2 + */ + +int __initdata mpurate; + +/* + * By default we use the rate set by the bootloader. + * You can override this with mpurate= cmdline option. + */ +static int __init omap_clk_setup(char *str) +{ + get_option(&str, &mpurate); + + if (!mpurate) + return 1; + + if (mpurate < 1000) + mpurate *= 1000000; + + return 1; +} +__setup("mpurate=", omap_clk_setup); + +/* Used for clocks that always have same value as the parent clock */ +unsigned long followparent_recalc(struct clk *clk) +{ + return clk->parent->rate; +} + +/* + * Used for clocks that have the same value as the parent clock, + * divided by some factor + */ +unsigned long omap_fixed_divisor_recalc(struct clk *clk) +{ + WARN_ON(!clk->fixed_div); + + return clk->parent->rate / clk->fixed_div; +} + +void clk_reparent(struct clk *child, struct clk *parent) +{ + list_del_init(&child->sibling); + if (parent) + list_add(&child->sibling, &parent->children); + child->parent = parent; + + /* now do the debugfs renaming to reattach the child + to the proper parent */ +} + +/* Propagate rate to children */ +void propagate_rate(struct clk *tclk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &tclk->children, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +static LIST_HEAD(root_clks); + +/** + * recalculate_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + * Called at init. + */ +void recalculate_root_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &root_clks, sibling) { + if (clkp->recalc) + clkp->rate = clkp->recalc(clkp); + propagate_rate(clkp); + } +} + +/** + * clk_preinit - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ +void clk_preinit(struct clk *clk) +{ + INIT_LIST_HEAD(&clk->children); +} + +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + /* + * trap out already registered clocks + */ + if (clk->node.next || clk->node.prev) + return 0; + + mutex_lock(&clocks_mutex); + if (clk->parent) + list_add(&clk->sibling, &clk->parent->children); + else + list_add(&clk->sibling, &root_clks); + + list_add(&clk->node, &clocks); + if (clk->init) + clk->init(clk); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->sibling); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +void clk_enable_init_clocks(void) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clocks, node) + if (clkp->flags & ENABLE_ON_INIT) + clk_enable(clkp); +} + +/** + * omap_clk_get_by_name - locate OMAP struct clk by its name + * @name: name of the struct clk to locate + * + * Locate an OMAP struct clk by its name. Assumes that struct clk + * names are unique. Returns NULL if not found or a pointer to the + * struct clk if found. + */ +struct clk *omap_clk_get_by_name(const char *name) +{ + struct clk *c; + struct clk *ret = NULL; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(c, &clocks, node) { + if (!strcmp(c->name, name)) { + ret = c; + break; + } + } + + mutex_unlock(&clocks_mutex); + + return ret; +} + +int omap_clk_enable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->allow_idle) + c->ops->allow_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +int omap_clk_disable_autoidle_all(void) +{ + struct clk *c; + unsigned long flags; + + spin_lock_irqsave(&clockfw_lock, flags); + + list_for_each_entry(c, &clocks, node) + if (c->ops->deny_idle) + c->ops->deny_idle(c); + + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} + +/* + * Low level helpers + */ +static int clkll_enable_null(struct clk *clk) +{ + return 0; +} + +static void clkll_disable_null(struct clk *clk) +{ +} + +const struct clkops clkops_null = { + .enable = clkll_enable_null, + .disable = clkll_disable_null, +}; + +/* + * Dummy clock + * + * Used for clock aliases that are needed on some OMAPs, but not others + */ +struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_null, +}; + +/* + * + */ + +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + pr_info("clock: disabling unused clocks to save power\n"); + + spin_lock_irqsave(&clockfw_lock, flags); + list_for_each_entry(ck, &clocks, node) { + if (ck->ops == &clkops_null) + continue; + + if (ck->usecount > 0 || !ck->enable_reg) + continue; + + omap1_clk_disable_unused(ck); + } + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +late_initcall(clk_disable_unused); +late_initcall(omap_clk_enable_autoidle_all); +#endif + +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) +/* + * debugfs support to trace clock tree hierarchy and attributes + */ + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static struct dentry *clk_debugfs_root; + +static int clk_dbg_show_summary(struct seq_file *s, void *unused) +{ + struct clk *c; + struct clk *pa; + + mutex_lock(&clocks_mutex); + seq_printf(s, "%-30s %-30s %-10s %s\n", + "clock-name", "parent-name", "rate", "use-count"); + + list_for_each_entry(c, &clocks, node) { + pa = c->parent; + seq_printf(s, "%-30s %-30s %-10lu %d\n", + c->name, pa ? pa->name : "none", c->rate, + c->usecount); + } + mutex_unlock(&clocks_mutex); + + return 0; +} + +static int clk_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_dbg_show_summary, inode->i_private); +} + +static const struct file_operations debug_clock_fops = { + .open = clk_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int clk_debugfs_register_one(struct clk *c) +{ + int err; + struct dentry *d; + struct clk *pa = c->parent; + + d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); + if (!d) + return -ENOMEM; + c->dent = d; + + d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); + if (!d) { + err = -ENOMEM; + goto err_out; + } + d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); + if (!d) { + err = -ENOMEM; + goto err_out; + } + return 0; + +err_out: + debugfs_remove_recursive(c->dent); + return err; +} + +static int clk_debugfs_register(struct clk *c) +{ + int err; + struct clk *pa = c->parent; + + if (pa && !pa->dent) { + err = clk_debugfs_register(pa); + if (err) + return err; + } + + if (!c->dent) { + err = clk_debugfs_register_one(c); + if (err) + return err; + } + return 0; +} + +static int __init clk_debugfs_init(void) +{ + struct clk *c; + struct dentry *d; + int err; + + d = debugfs_create_dir("clock", NULL); + if (!d) + return -ENOMEM; + clk_debugfs_root = d; + + list_for_each_entry(c, &clocks, node) { + err = clk_debugfs_register(c); + if (err) + goto err_out; + } + + d = debugfs_create_file("summary", S_IRUGO, + d, NULL, &debug_clock_fops); + if (!d) + return -ENOMEM; + + return 0; +err_out: + debugfs_remove_recursive(clk_debugfs_root); + return err; +} +late_initcall(clk_debugfs_init); + +#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */ diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 3d04f4f..1e4918a 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -14,8 +14,184 @@ #define __ARCH_ARM_MACH_OMAP1_CLOCK_H #include <linux/clk.h> +#include <linux/list.h> -#include <plat/clock.h> +#include <linux/clkdev.h> + +struct module; +struct clk; + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + +/* Platform flags for the clkdev-OMAP integration code */ +#define CK_310 (1 << 0) +#define CK_7XX (1 << 1) /* 7xx, 850 */ +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ +#define CK_1710 (1 << 4) /* 1710 extra for rate selection */ + + +/* Temporary, needed during the common clock framework conversion */ +#define __clk_get_name(clk) (clk->name) +#define __clk_get_parent(clk) (clk->parent) +#define __clk_get_rate(clk) (clk->rate) + +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * @allow_idle: fn ptr that enables autoidle for the current clock in hardware + * @deny_idle: fn ptr that disables autoidle for the current clock in hardware + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ +struct clkops { + int (*enable)(struct clk *); + void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, + u8 *, u8 *); + void (*find_companion)(struct clk *, void __iomem **, + u8 *); + void (*allow_idle)(struct clk *); + void (*deny_idle)(struct clk *); +}; + +/* + * struct clk.flags possibilities + * + * XXX document the rest of the clock flags here + * + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ +struct clk { + struct list_head node; + const struct clkops *ops; + const char *name; + struct clk *parent; + struct list_head children; + struct list_head sibling; /* node for children */ + unsigned long rate; + void __iomem *enable_reg; + unsigned long (*recalc)(struct clk *); + int (*set_rate)(struct clk *, unsigned long); + long (*round_rate)(struct clk *, unsigned long); + void (*init)(struct clk *); + u8 enable_bit; + s8 usecount; + u8 fixed_div; + u8 flags; + u8 rate_offset; + u8 src_offset; +#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ +#endif +}; + +struct clk_functions { + int (*clk_enable)(struct clk *clk); + void (*clk_disable)(struct clk *clk); + long (*clk_round_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_rate)(struct clk *clk, unsigned long rate); + int (*clk_set_parent)(struct clk *clk, struct clk *parent); + void (*clk_allow_idle)(struct clk *clk); + void (*clk_deny_idle)(struct clk *clk); + void (*clk_disable_unused)(struct clk *clk); +}; + +extern int mpurate; + +extern int clk_init(struct clk_functions *custom_clocks); +extern void clk_preinit(struct clk *clk); +extern int clk_register(struct clk *clk); +extern void clk_reparent(struct clk *child, struct clk *parent); +extern void clk_unregister(struct clk *clk); +extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); +extern unsigned long followparent_recalc(struct clk *clk); +extern void clk_enable_init_clocks(void); +unsigned long omap_fixed_divisor_recalc(struct clk *clk); +extern struct clk *omap_clk_get_by_name(const char *name); +extern int omap_clk_enable_autoidle_all(void); +extern int omap_clk_disable_autoidle_all(void); + +extern const struct clkops clkops_null; + +extern struct clk dummy_ck; int omap1_clk_init(void); void omap1_clk_late_init(void); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 9b45f4b..cb7c6ae 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -22,16 +22,14 @@ #include <asm/mach-types.h> /* for machine_is_* */ -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/clkdev_omap.h> -#include <plat/sram.h> /* for omap_sram_reprogram_clock() */ +#include "soc.h" #include <mach/hardware.h> #include <mach/usb.h> /* for OTG_BASE */ #include "iomap.h" #include "clock.h" +#include "sram.h" /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ #define IDL_CLKOUT_ARM_SHIFT 12 @@ -765,14 +763,6 @@ static struct omap_clk omap_clks[] = { * init */ -static struct clk_functions omap1_clk_functions = { - .clk_enable = omap1_clk_enable, - .clk_disable = omap1_clk_disable, - .clk_round_rate = omap1_clk_round_rate, - .clk_set_rate = omap1_clk_set_rate, - .clk_disable_unused = omap1_clk_disable_unused, -}; - static void __init omap1_show_rates(void) { pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", @@ -803,8 +793,6 @@ int __init omap1_clk_init(void) if (!cpu_is_omap15xx()) omap_writew(0, SOFT_REQ_REG2); - clk_init(&omap1_clk_functions); - /* By default all idlect1 clocks are allowed to idle */ arm_idlect1_mask = ~0; diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index c2552b2..b53e085 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -26,8 +26,10 @@ #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H #define __ARCH_ARM_MACH_OMAP1_COMMON_H -#include <plat/common.h> #include <linux/mtd/mtd.h> +#include <linux/i2c-omap.h> + +#include <plat/i2c.h> #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); @@ -38,6 +40,7 @@ static inline void omap7xx_map_io(void) #endif #ifdef CONFIG_ARCH_OMAP15XX +void omap1510_fpga_init_irq(void); void omap15xx_map_io(void); #else static inline void omap15xx_map_io(void) @@ -90,4 +93,6 @@ extern int ocpi_enable(void); static inline int ocpi_enable(void) { return 0; } #endif +extern u32 omap1_get_reset_sources(void); + #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index d3fec92..0af635205 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -17,12 +17,12 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/platform_data/omap-wd-timer.h> + #include <asm/mach/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/mmc.h> #include <mach/omap7xx.h> #include <mach/camera.h> @@ -30,6 +30,9 @@ #include "common.h" #include "clock.h" +#include "dma.h" +#include "mmc.h" +#include "sram.h" #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) @@ -175,6 +178,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base, res[3].name = "tx"; res[3].flags = IORESOURCE_DMA; + if (cpu_is_omap7xx()) + data->slots[0].features = MMC_OMAP7XX; + if (cpu_is_omap15xx()) + data->slots[0].features = MMC_OMAP15XX; + if (cpu_is_omap16xx()) + data->slots[0].features = MMC_OMAP16XX; + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret == 0) ret = platform_device_add_data(pdev, data, sizeof(*data)); @@ -439,18 +449,31 @@ static struct resource wdt_resources[] = { }; static struct platform_device omap_wdt_device = { - .name = "omap_wdt", - .id = -1, + .name = "omap_wdt", + .id = -1, .num_resources = ARRAY_SIZE(wdt_resources), .resource = wdt_resources, }; static int __init omap_init_wdt(void) { + struct omap_wd_timer_platform_data pdata; + int ret; + if (!cpu_is_omap16xx()) return -ENODEV; - return platform_device_register(&omap_wdt_device); + pdata.read_reset_sources = omap1_get_reset_sources; + + ret = platform_device_register(&omap_wdt_device); + if (!ret) { + ret = platform_device_add_data(&omap_wdt_device, &pdata, + sizeof(pdata)); + if (ret) + platform_device_del(&omap_wdt_device); + } + + return ret; } subsys_initcall(omap_init_wdt); #endif diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 29007fe..e190611 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,11 +25,13 @@ #include <linux/device.h> #include <linux/io.h> -#include <plat/dma.h> -#include <plat/tc.h> +#include <linux/omap-dma.h> +#include <mach/tc.h> #include <mach/irqs.h> +#include "dma.h" + #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 #define OMAP1_DMA_STRIDE 0x40 @@ -319,6 +321,9 @@ static int __init omap1_system_dma_init(void) d->dev_caps = ENABLE_1510_MODE; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; + if (cpu_is_omap16xx()) + d->dev_caps = ENABLE_16XX_MODE; + d->dev_caps |= SRC_PORT; d->dev_caps |= DST_PORT; d->dev_caps |= SRC_INDEX; diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h new file mode 100644 index 0000000..da6345d --- /dev/null +++ b/arch/arm/mach-omap1/dma.h @@ -0,0 +1,83 @@ +/* + * OMAP1 DMA channel definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __OMAP1_DMA_CHANNEL_H +#define __OMAP1_DMA_CHANNEL_H + +/* DMA channels for omap1 */ +#define OMAP_DMA_NO_DEVICE 0 +#define OMAP_DMA_MCSI1_TX 1 +#define OMAP_DMA_MCSI1_RX 2 +#define OMAP_DMA_I2C_RX 3 +#define OMAP_DMA_I2C_TX 4 +#define OMAP_DMA_EXT_NDMA_REQ 5 +#define OMAP_DMA_EXT_NDMA_REQ2 6 +#define OMAP_DMA_UWIRE_TX 7 +#define OMAP_DMA_MCBSP1_TX 8 +#define OMAP_DMA_MCBSP1_RX 9 +#define OMAP_DMA_MCBSP3_TX 10 +#define OMAP_DMA_MCBSP3_RX 11 +#define OMAP_DMA_UART1_TX 12 +#define OMAP_DMA_UART1_RX 13 +#define OMAP_DMA_UART2_TX 14 +#define OMAP_DMA_UART2_RX 15 +#define OMAP_DMA_MCBSP2_TX 16 +#define OMAP_DMA_MCBSP2_RX 17 +#define OMAP_DMA_UART3_TX 18 +#define OMAP_DMA_UART3_RX 19 +#define OMAP_DMA_CAMERA_IF_RX 20 +#define OMAP_DMA_MMC_TX 21 +#define OMAP_DMA_MMC_RX 22 +#define OMAP_DMA_NAND 23 +#define OMAP_DMA_IRQ_LCD_LINE 24 +#define OMAP_DMA_MEMORY_STICK 25 +#define OMAP_DMA_USB_W2FC_RX0 26 +#define OMAP_DMA_USB_W2FC_RX1 27 +#define OMAP_DMA_USB_W2FC_RX2 28 +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_TX1 30 +#define OMAP_DMA_USB_W2FC_TX2 31 + +/* These are only for 1610 */ +#define OMAP_DMA_CRYPTO_DES_IN 32 +#define OMAP_DMA_SPI_TX 33 +#define OMAP_DMA_SPI_RX 34 +#define OMAP_DMA_CRYPTO_HASH 35 +#define OMAP_DMA_CCP_ATTN 36 +#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 +#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 +#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 +#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 +#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 +#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 +#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 +#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 +#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 +#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 +#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 +#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 +#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 +#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 +#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 +#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 +#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 +#define OMAP_DMA_MMC2_TX 54 +#define OMAP_DMA_MMC2_RX 55 +#define OMAP_DMA_CRYPTO_DES_OUT 56 + +#endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 73ae616..b3fb531 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -10,7 +10,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/flash.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 29ec50f..8bd71b2 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -27,11 +27,11 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <plat/fpga.h> - #include <mach/hardware.h> #include "iomap.h" +#include "common.h" +#include "fpga.h" static void fpga_mask_irq(struct irq_data *d) { diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h new file mode 100644 index 0000000..4b4307a --- /dev/null +++ b/arch/arm/mach-omap1/fpga.h @@ -0,0 +1,52 @@ +/* + * Interrupt handler for OMAP-1510 FPGA + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Copyright (C) 2002 MontaVista Software, Inc. + * + * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 + * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_OMAP_FPGA_H +#define __ASM_ARCH_OMAP_FPGA_H + +/* + * --------------------------------------------------------------------------- + * H2/P2 Debug board FPGA + * --------------------------------------------------------------------------- + */ +/* maps in the FPGA registers and the ETHR registers */ +#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ +#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ +#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ + +#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) +#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ +#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ +#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ +#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ +#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ +#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ +#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ + +/* LEDs definition on debug board (16 LEDs, all physically green) */ +#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) +#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) +#define H2P2_DBG_FPGA_LED_RED (1 << 13) +#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) +/* cpu0 load-meter LEDs */ +#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... +#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 +#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) + +#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) +#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) + +#endif diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 98e6f39..02b3eb2 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 33f4192..b9952a2 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 #define OMAP1610_GPIO3_BASE 0xfffbb400 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 958ce9a..f5819b2 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 #define OMAP7XX_GPIO3_BASE 0xfffbd000 diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index a0551a6..faca808 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -19,11 +19,25 @@ * */ -#include <plat/i2c.h> +#include <linux/i2c-omap.h> #include <mach/mux.h> -#include <plat/cpu.h> +#include "soc.h" + +#include <plat/i2c.h> + +#define OMAP_I2C_SIZE 0x3f +#define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP1_INT_I2C (32 + 4) + +static const char name[] = "omap_i2c"; -void __init omap1_i2c_mux_pins(int bus_id) +static struct resource i2c_resources[2] = { +}; + +static struct platform_device omap_i2c_devices[1] = { +}; + +static void __init omap1_i2c_mux_pins(int bus_id) { if (cpu_is_omap7xx()) { omap_cfg_reg(I2C_7XX_SDA); @@ -33,3 +47,47 @@ void __init omap1_i2c_mux_pins(int bus_id) omap_cfg_reg(I2C_SCL); } } + +int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, + int bus_id) +{ + struct platform_device *pdev; + struct resource *res; + + if (bus_id > 1) + return -EINVAL; + + omap1_i2c_mux_pins(bus_id); + + pdev = &omap_i2c_devices[bus_id - 1]; + pdev->id = bus_id; + pdev->name = name; + pdev->num_resources = ARRAY_SIZE(i2c_resources); + res = i2c_resources; + res[0].start = OMAP1_I2C_BASE; + res[0].end = res[0].start + OMAP_I2C_SIZE; + res[0].flags = IORESOURCE_MEM; + res[1].start = OMAP1_INT_I2C; + res[1].flags = IORESOURCE_IRQ; + pdev->resource = res; + + /* all OMAP1 have IP version 1 register set */ + pdata->rev = OMAP_I2C_IP_VERSION_1; + + /* all OMAP1 I2C are implemented like this */ + pdata->flags = OMAP_I2C_FLAG_NO_FIFO | + OMAP_I2C_FLAG_SIMPLE_CLOCK | + OMAP_I2C_FLAG_16BIT_DATA_REG | + OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK; + + /* how the cpu bus is wired up differs for 7xx only */ + + if (cpu_is_omap7xx()) + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1; + else + pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2; + + pdev->dev.platform_data = pdata; + + return platform_device_register(pdev); +} diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index a1b846a..52de382 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <asm/system_info.h> -#include <plat/cpu.h> +#include "soc.h" #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 2b36a28..5c1a26c 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include <linux/serial_reg.h> -#include <plat/serial.h> +#include "serial.h" .pushsection .data omap_uart_phys: .word 0x0 diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index 88f08ca..78a8c6c 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -13,8 +13,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include "../../iomap.h" - .macro get_irqnr_preamble, base, tmp .endm diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h deleted file mode 100644 index ebf86c0..0000000 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/gpio.h - */ diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index 84248d2..5875a50 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -39,7 +39,7 @@ #include <asm/sizes.h> #ifndef __ASSEMBLER__ #include <asm/types.h> -#include <plat/cpu.h> +#include <mach/soc.h> /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these @@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa); extern void omap_writew(u16 v, u32 pa); extern void omap_writel(u32 v, u32 pa); -#include <plat/tc.h> +#include <mach/tc.h> /* Almost all documentation for chip and board memory maps assumes * BM is clear. Most devel boards have a switch to control booting @@ -72,7 +72,10 @@ static inline u32 omap_cs3_phys(void) #endif /* ifndef __ASSEMBLER__ */ -#include <plat/serial.h> +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + +#include <mach/serial.h> /* * --------------------------------------------------------------------------- diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index 901082d..3c25305 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -19,7 +19,7 @@ * because of the strncmp(). */ #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) -#include <plat/cpu.h> +#include <mach/soc.h> /* * OMAP-1510 Local Bus address offset diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h index 8fe05d6..3d23524 100644 --- a/arch/arm/mach-omap1/include/mach/omap1510.h +++ b/arch/arm/mach-omap1/include/mach/omap1510.h @@ -45,5 +45,118 @@ #define OMAP1510_DSP_MMU_BASE (0xfffed200) +/* + * --------------------------------------------------------------------------- + * OMAP-1510 FPGA + * --------------------------------------------------------------------------- + */ +#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */ +#define OMAP1510_FPGA_SIZE SZ_4K +#define OMAP1510_FPGA_START 0x08000000 /* PA */ + +/* Revision */ +#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0) +#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1) +#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2) +#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3) +#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4) +#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5) + +/* Interrupt status */ +#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6) +#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7) + +/* Interrupt mask */ +#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8) +#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9) + +/* Reset registers */ +#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa) +#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb) + +#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc) +#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe) +#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf) +#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14) +#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15) +#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16) +#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18) +#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c) +#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100) +#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101) +#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102) + +#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204) + +#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205) +#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206) +#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207) +#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208) +#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209) +#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a) +#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b) +#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d) +#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e) +#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210) + +#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) + +/* + * Power up Giga UART driver, turn on HID clock. + * Turn off BT power, since we're not using it and it + * draws power. + */ +#define OMAP1510_FPGA_RESET_VALUE 0x42 + +#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) +#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) +#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) +#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) +#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) +#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) +#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) +#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) + +/* + * Innovator/OMAP1510 FPGA HID register bit definitions + */ +#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ +#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ +#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ +#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ +#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ +#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ +#define OMAP1510_FPGA_HID_rsrvd (1<<6) +#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ + +/* The FPGA IRQ is cascaded through GPIO_13 */ +#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) + +/* IRQ Numbers for interrupts muxed through the FPGA */ +#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) +#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) +#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) +#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) +#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) +#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) +#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) +#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) +#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) +#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) +#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) +#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) +#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) +#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) +#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) +#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) +#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) +#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) +#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) +#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) +#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) +#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) +#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) +#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) + #endif /* __ASM_ARCH_OMAP15XX_H */ diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h new file mode 100644 index 0000000..2ce6a2d --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/serial.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_SERIAL_H +#define __ASM_ARCH_SERIAL_H + +#include <linux/init.h> + +/* + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO_OFS 0x3ffc + +/* OMAP1 serial ports */ +#define OMAP1_UART1_BASE 0xfffb0000 +#define OMAP1_UART2_BASE 0xfffb0800 +#define OMAP1_UART3_BASE 0xfffb9800 + +#define OMAP_PORT_SHIFT 2 +#define OMAP7XX_PORT_SHIFT 0 + +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) + +/* + * DEBUG_LL port encoding stored into the UART1 scratchpad register by + * decomp_setup in uncompress.h + */ +#define OMAP1UART1 11 +#define OMAP1UART2 12 +#define OMAP1UART3 13 + +#ifndef __ASSEMBLER__ +extern void omap_serial_init(void); +#endif + +#endif diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h new file mode 100644 index 0000000..6cf9c1c --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/soc.h @@ -0,0 +1,229 @@ +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +#ifndef __ASSEMBLY__ + +#include <linux/bitops.h> + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730, OMAP850 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap310(): True for OMAP310 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) + +#define cpu_is_omap310() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 + +/* These are needed to compile common code */ +#ifdef CONFIG_ARCH_OMAP1 +#define cpu_is_omap242x() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap24xx() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap44xx() 0 +#define soc_is_omap54xx() 0 +#define soc_is_am33xx() 0 +#define cpu_class_is_omap1() 1 +#define cpu_class_is_omap2() 0 +#endif + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 310 vs. 1510 and 1611B/5912 vs. 1710. + */ + +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/mach-omap1/include/mach/tc.h b/arch/arm/mach-omap1/include/mach/tc.h new file mode 100644 index 0000000..1b4b2da --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/tc.h @@ -0,0 +1,89 @@ +/* + * arch/arm/plat-omap/include/mach/tc.h + * + * OMAP Traffic Controller + * + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __ASM_ARCH_TC_H +#define __ASM_ARCH_TC_H + +#define TCMIF_BASE 0xfffecc00 +#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00) +#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04) +#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08) +#define EMIFS_CONFIG (TCMIF_BASE + 0x0c) +#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) +#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) +#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) +#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) +#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) +#define EMIFF_MRS (TCMIF_BASE + 0x24) +#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) +#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) +#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) +#define TC_ENDIANISM (TCMIF_BASE + 0x34) +#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) +#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) +#define EMIFS_ACS0 (TCMIF_BASE + 0x50) +#define EMIFS_ACS1 (TCMIF_BASE + 0x54) +#define EMIFS_ACS2 (TCMIF_BASE + 0x58) +#define EMIFS_ACS3 (TCMIF_BASE + 0x5c) +#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0) + +/* external EMIFS chipselect regions */ +#define OMAP_CS0_PHYS 0x00000000 +#define OMAP_CS0_SIZE SZ_64M + +#define OMAP_CS1_PHYS 0x04000000 +#define OMAP_CS1_SIZE SZ_64M + +#define OMAP_CS1A_PHYS OMAP_CS1_PHYS +#define OMAP_CS1A_SIZE SZ_32M + +#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE) +#define OMAP_CS1B_SIZE SZ_32M + +#define OMAP_CS2_PHYS 0x08000000 +#define OMAP_CS2_SIZE SZ_64M + +#define OMAP_CS2A_PHYS OMAP_CS2_PHYS +#define OMAP_CS2A_SIZE SZ_32M + +#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE) +#define OMAP_CS2B_SIZE SZ_32M + +#define OMAP_CS3_PHYS 0x0c000000 +#define OMAP_CS3_SIZE SZ_64M + +#ifndef __ASSEMBLER__ + +/* EMIF Slow Interface Configuration Register */ +#define OMAP_EMIFS_CONFIG_FR (1 << 4) +#define OMAP_EMIFS_CONFIG_PDE (1 << 3) +#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) +#define OMAP_EMIFS_CONFIG_BM (1 << 1) +#define OMAP_EMIFS_CONFIG_WP (1 << 0) + +#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) +#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) + +#endif /* __ASSEMBLER__ */ + +#endif /* __ASM_ARCH_TC_H */ diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h index 0ff22dc..ad6fbe7 100644 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -1,5 +1,122 @@ /* - * arch/arm/mach-omap1/include/mach/uncompress.h + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Initially based on: + * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ -#include <plat/uncompress.h> +#include <linux/types.h> +#include <linux/serial_reg.h> + +#include <asm/memory.h> +#include <asm/mach-types.h> + +#include "serial.h" + +#define MDR1_MODE_MASK 0x07 + +volatile u8 *uart_base; +int uart_shift; + +/* + * Store the DEBUG_LL uart number into memory. + * See also debug-macro.S, and serial.c for related code. + */ +static void set_omap_uart_info(unsigned char port) +{ + /* + * Get address of some.bss variable and round it down + * a la CONFIG_AUTO_ZRELADDR. + */ + u32 ram_start = (u32)&uart_shift & 0xf8000000; + u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); + *uart_info = port; +} + +static void putc(int c) +{ + if (!uart_base) + return; + + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) + barrier(); + uart_base[UART_TX << uart_shift] = c; +} + +static inline void flush(void) +{ +} + +/* + * Macros to configure UART1 and debug UART + */ +#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ + if (machine_is_##mach()) { \ + uart_base = (volatile u8 *)(dbg_uart); \ + uart_shift = (dbg_shft); \ + port = (dbg_id); \ + set_omap_uart_info(port); \ + break; \ + } + +#define DEBUG_LL_OMAP7XX(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \ + OMAP1UART##p) + +#define DEBUG_LL_OMAP1(p, mach) \ + _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \ + OMAP1UART##p) + +static inline void arch_decomp_setup(void) +{ + int port = 0; + + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* omap7xx/8xx based boards using UART1 with shift 0 */ + DEBUG_LL_OMAP7XX(1, herald); + DEBUG_LL_OMAP7XX(1, omap_perseus2); + + /* omap15xx/16xx based boards using UART1 */ + DEBUG_LL_OMAP1(1, ams_delta); + DEBUG_LL_OMAP1(1, nokia770); + DEBUG_LL_OMAP1(1, omap_h2); + DEBUG_LL_OMAP1(1, omap_h3); + DEBUG_LL_OMAP1(1, omap_innovator); + DEBUG_LL_OMAP1(1, omap_osk); + DEBUG_LL_OMAP1(1, omap_palmte); + DEBUG_LL_OMAP1(1, omap_palmz71); + + /* omap15xx/16xx based boards using UART2 */ + DEBUG_LL_OMAP1(2, omap_palmtt); + + /* omap15xx/16xx based boards using UART3 */ + DEBUG_LL_OMAP1(3, sx1); + } while (0); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 6a5baab..499b8ac 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -17,8 +17,8 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/tc.h> -#include <plat/dma.h> +#include <mach/tc.h> +#include <linux/omap-dma.h> #include "iomap.h" #include "common.h" @@ -134,7 +134,6 @@ void __init omap1_init_early(void) */ omap1_clk_init(); omap1_mux_init(); - omap_init_consistent_dma_size(); } void __init omap1_init_late(void) diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h index 330c471..f4e2d7a 100644 --- a/arch/arm/mach-omap1/iomap.h +++ b/arch/arm/mach-omap1/iomap.h @@ -22,9 +22,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - /* * ---------------------------------------------------------------------------- * Omap1 specific IO mapping diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 6995fb6..122ef67 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -45,7 +45,7 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <plat/cpu.h> +#include "soc.h" #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index ed42628..77924be 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,11 +27,13 @@ #include <linux/interrupt.h> #include <linux/io.h> -#include <plat/dma.h> +#include <linux/omap-dma.h> #include <mach/hardware.h> #include <mach/lcdc.h> +#include "dma.h" + int omap_lcd_dma_running(void) { /* diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index bdc2e75..b0d4723 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,14 +19,15 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <plat/dma.h> +#include <linux/omap-dma.h> #include <mach/mux.h> -#include <plat/cpu.h> +#include "soc.h" #include <linux/platform_data/asoc-ti-mcbsp.h> #include <mach/irqs.h> #include "iomap.h" +#include "dma.h" #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h new file mode 100644 index 0000000..39c2b13 --- /dev/null +++ b/arch/arm/mach-omap1/mmc.h @@ -0,0 +1,18 @@ +#include <linux/mmc/host.h> +#include <linux/platform_data/mmc-omap.h> + +#define OMAP15XX_NR_MMC 1 +#define OMAP16XX_NR_MMC 2 +#define OMAP1_MMC_SIZE 0x080 +#define OMAP1_MMC1_BASE 0xfffb7800 +#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers); +#else +static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers) +{ +} +#endif diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c index 9cd4ddb..8dcebe6 100644 --- a/arch/arm/mach-omap1/opp_data.c +++ b/arch/arm/mach-omap1/opp_data.c @@ -10,7 +10,7 @@ * published by the Free Software Foundation. */ -#include <plat/clkdev_omap.h> +#include "clock.h" #include "opp.h" /*------------------------------------------------------------------------- diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 47ec161..7a7690a 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -44,23 +44,23 @@ #include <linux/io.h> #include <linux/atomic.h> +#include <asm/fncpy.h> #include <asm/system_misc.h> #include <asm/irq.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <plat/cpu.h> -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/tc.h> +#include <mach/tc.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <linux/omap-dma.h> #include <plat/dmtimer.h> #include <mach/irqs.h> #include "iomap.h" +#include "clock.h" #include "pm.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index 7868e75..3f2d396 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -19,8 +19,7 @@ #include <linux/clk.h> #include <linux/err.h> -#include <plat/omap_device.h> -#include <plat/omap-pm.h> +#include "soc.h" #ifdef CONFIG_PM_RUNTIME static int omap1_pm_runtime_suspend(struct device *dev) diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index b177091..5eebd7e 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -4,12 +4,24 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/prcm.h> - #include <mach/hardware.h> +#include "iomap.h" #include "common.h" +/* ARM_SYSST bit shifts related to SoC reset sources */ +#define ARM_SYSST_POR_SHIFT 5 +#define ARM_SYSST_EXT_RST_SHIFT 4 +#define ARM_SYSST_ARM_WDRST_SHIFT 2 +#define ARM_SYSST_GLOB_SWRST_SHIFT 1 + +/* Standardized reset source bits (across all OMAP SoCs) */ +#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0 +#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1 +#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3 +#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5 + + void omap1_restart(char mode, const char *cmd) { /* @@ -23,3 +35,28 @@ void omap1_restart(char mode, const char *cmd) omap_writew(1, ARM_RSTCT1); } + +/** + * omap1_get_reset_sources - return the source of the SoC's last reset + * + * Returns bits that represent the last reset source for the SoC. The + * format is standardized across OMAPs for use by the OMAP watchdog. + */ +u32 omap1_get_reset_sources(void) +{ + u32 ret = 0; + u16 rs; + + rs = __raw_readw(OMAP1_IO_ADDRESS(ARM_SYSST)); + + if (rs & (1 << ARM_SYSST_POR_SHIFT)) + ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT)) + ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT)) + ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT; + if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT)) + ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT; + + return ret; +} diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index b9d6834..d1ac080 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -23,7 +23,6 @@ #include <asm/mach-types.h> #include <mach/mux.h> -#include <plat/fpga.h> #include "pm.h" diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 0e62874..a908c51 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -36,6 +36,8 @@ #include <asm/assembler.h> +#include <mach/hardware.h> + #include "iomap.h" #include "pm.h" diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h new file mode 100644 index 0000000..69daf01 --- /dev/null +++ b/arch/arm/mach-omap1/soc.h @@ -0,0 +1,4 @@ +/* + * We can move mach/soc.h here once the drivers are fixed + */ +#include <mach/soc.h> diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c new file mode 100644 index 0000000..6431b0f --- /dev/null +++ b/arch/arm/mach-omap1/sram-init.c @@ -0,0 +1,76 @@ +/* + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "sram.h" + +#define OMAP1_SRAM_PA 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_and_map_sram(void) +{ + unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ; + unsigned long omap_sram_start = OMAP1_SRAM_PA; + unsigned long omap_sram_size; + + if (cpu_is_omap7xx()) + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ + else if (cpu_is_omap1610() || cpu_is_omap1611() || + cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; /* 16K */ + else { + pr_err("Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, 1); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + BUG_ON(!_omap_sram_reprogram_clock); + /* On 730, bit 13 must always be 1 */ + if (cpu_is_omap7xx()) + ckctl |= 0x2000; + _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +int __init omap_sram_init(void) +{ + omap_detect_and_map_sram(); + _omap_sram_reprogram_clock = + omap_sram_push(omap1_sram_reprogram_clock, + omap1_sram_reprogram_clock_sz); + + return 0; +} diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h new file mode 100644 index 0000000..d5a6c83 --- /dev/null +++ b/arch/arm/mach-omap1/sram.h @@ -0,0 +1,7 @@ +#include <plat/sram.h> + +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index cdeb9d3..bde7a35 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 7452954..41152fa 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -50,7 +50,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <plat/dmtimer.h> +#include <plat/counter-32k.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 84267ed..104fed36 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -301,7 +301,7 @@ static inline void otg_device_init(struct omap_usb_config *pdata) #endif -u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) +static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; @@ -409,7 +409,7 @@ u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) return syscon1 << 16; } -u32 __init omap1_usb1_init(unsigned nwires) +static u32 __init omap1_usb1_init(unsigned nwires) { u32 syscon1 = 0; @@ -475,7 +475,7 @@ bad: return syscon1 << 20; } -u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) { u32 syscon1 = 0; |