diff options
Diffstat (limited to 'arch/arm/mach-omap2')
44 files changed, 1197 insertions, 378 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b9d8a7b..b997a358 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -44,7 +44,9 @@ config ARCH_OMAP4 depends on ARCH_OMAP2PLUS select CPU_V7 select ARM_GIC + select LOCAL_TIMERS if SMP select PL310_ERRATA_588369 + select PL310_ERRATA_727915 select ARM_ERRATA_720789 select ARCH_HAS_OPP select PM_OPP if PM diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 82b2a67..a45cd64 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -253,7 +253,7 @@ usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o -obj-y += usb-ehci.o +obj-y += usb-host.o onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o obj-y += $(onenand-m) $(onenand-y) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index b391804..9afd087 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -307,9 +307,6 @@ static struct omap_dss_board_info sdp3430_dss_data = { .default_device = &sdp3430_lcd_device, }; -static struct regulator_consumer_supply sdp3430_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); - static struct omap_board_config_kernel sdp3430_config[] __initdata = { }; @@ -398,12 +395,13 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { }; static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss"), + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), }; /* VPLL2 for digital video outputs */ static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = { @@ -636,11 +634,11 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 57, @@ -902,7 +900,7 @@ static void __init omap_3430sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); enable_board_wakeup_source(); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index c4e22b3..a5933cc 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -55,11 +55,11 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 126, @@ -211,7 +211,7 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16); enable_board_wakeup_source(); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 670cbd5..56702c5 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -36,6 +36,7 @@ #include <plat/usb.h> #include <plat/mmc.h> #include <plat/omap4-keypad.h> +#include <plat/display.h> #include "mux.h" #include "hsmmc.h" @@ -47,6 +48,8 @@ #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 +#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ static const int sdp4430_keymap[] = { KEY(0, 0, KEY_E), @@ -343,6 +346,7 @@ static struct twl4030_usb_data omap4_usbphy_data = { .phy_exit = omap4430_phy_exit, .phy_power = omap4430_phy_power, .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, }; static struct omap2_hsmmc_info mmc[] = { @@ -546,6 +550,12 @@ static struct regulator_init_data sdp4430_vusb = { }, }; +static struct regulator_init_data sdp4430_clk32kg = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + static struct twl4030_platform_data sdp4430_twldata = { .irq_base = TWL6030_IRQ_BASE, .irq_end = TWL6030_IRQ_END, @@ -561,6 +571,7 @@ static struct twl4030_platform_data sdp4430_twldata = { .vaux1 = &sdp4430_vaux1, .vaux2 = &sdp4430_vaux2, .vaux3 = &sdp4430_vaux3, + .clk32kg = &sdp4430_clk32kg, .usb = &omap4_usbphy_data }; @@ -620,6 +631,76 @@ static void __init omap_sfh7741prox_init(void) } } +static void sdp4430_hdmi_mux_init(void) +{ + /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ + omap_mux_init_signal("hdmi_hpd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_cec", + OMAP_PIN_INPUT_PULLUP); + /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ + omap_mux_init_signal("hdmi_ddc_scl", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_ddc_sda", + OMAP_PIN_INPUT_PULLUP); +} + +static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) +{ + int status; + + status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, + "hdmi_gpio_hpd"); + if (status) { + pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); + return status; + } + status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, + "hdmi_gpio_ls_oe"); + if (status) { + pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); + goto error1; + } + + return 0; + +error1: + gpio_free(HDMI_GPIO_HPD); + + return status; +} + +static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) +{ + gpio_free(HDMI_GPIO_LS_OE); + gpio_free(HDMI_GPIO_HPD); +} + +static struct omap_dss_device sdp4430_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .platform_enable = sdp4430_panel_enable_hdmi, + .platform_disable = sdp4430_panel_disable_hdmi, + .channel = OMAP_DSS_CHANNEL_DIGIT, +}; + +static struct omap_dss_device *sdp4430_dss_devices[] = { + &sdp4430_hdmi_device, +}; + +static struct omap_dss_board_info sdp4430_dss_data = { + .num_devices = ARRAY_SIZE(sdp4430_dss_devices), + .devices = sdp4430_dss_devices, + .default_device = &sdp4430_hdmi_device, +}; + +void omap_4430sdp_display_init(void) +{ + sdp4430_hdmi_mux_init(); + omap_display_init(&sdp4430_dss_data); +} + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -728,6 +809,8 @@ static void __init omap_4430sdp_init(void) status = omap4_keyboard_init(&sdp4430_keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); + + omap_4430sdp_display_init(); } static void __init omap_4430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index f53bbb2..a890d24 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -55,10 +55,10 @@ static void __init am3517_crane_init_early(void) omap2_init_common_devices(NULL, NULL); } -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = GPIO_USB_NRESET, @@ -102,7 +102,7 @@ static void __init am3517_crane_init(void) return; } - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 77541cf..ce7d5e6 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -419,15 +419,15 @@ static __init void am3517_evm_musb_init(void) usb_musb_init(&musb_board_data); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, #else - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, #endif - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 57, @@ -494,7 +494,7 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ am3517_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 71545c9..02a12b4 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -488,7 +488,7 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = { }; static struct regulator_consumer_supply cm_t35_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); static struct regulator_consumer_supply cm_t35_vdvi_supply = REGULATOR_SUPPLY("vdvi", "omapdss"); @@ -593,10 +593,10 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6, @@ -798,7 +798,7 @@ static void __init cm_t35_init(void) cm_t35_init_display(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 4c737e4..a27e3ee 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -167,10 +167,10 @@ static inline void cm_t3517_init_rtc(void) {} #define HSUSB2_RESET_GPIO (147) #define USB_HUB_RESET_GPIO (152) -static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = HSUSB1_RESET_GPIO, @@ -192,7 +192,7 @@ static int cm_t3517_init_usbh(void) msleep(1); } - usb_ehci_init(&cm_t3517_ehci_pdata); + usbhs_init(&cm_t3517_ehci_pdata); return 0; } diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 472a25b..65f9fde 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -196,7 +196,7 @@ static struct omap_dss_board_info devkit8000_dss_data = { }; static struct regulator_consumer_supply devkit8000_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), @@ -277,8 +277,10 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { .setup = devkit8000_twl_gpio_setup, }; -static struct regulator_consumer_supply devkit8000_vpll1_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data devkit8000_vmmc1 = { @@ -319,8 +321,8 @@ static struct regulator_init_data devkit8000_vpll1 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vpll1_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll1_supplies), + .consumer_supplies = devkit8000_vpll1_supplies, }; /* VAUX4 for ads7846 and nubs */ @@ -613,11 +615,11 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -799,7 +801,7 @@ static void __init devkit8000_init(void) devkit8000_ads7846_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); devkit8000_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index c4b3c1c..5f8a2fd 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -485,8 +485,10 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, }; -static struct regulator_consumer_supply igep2_vpll2_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply igep2_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static struct regulator_init_data igep2_vpll2 = { .constraints = { @@ -499,8 +501,8 @@ static struct regulator_init_data igep2_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies), + .consumer_supplies = igep2_vpll2_supplies, }; static void __init igep2_display_init(void) @@ -613,10 +615,10 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, @@ -686,7 +688,7 @@ static void __init igep2_init(void) omap_display_init(&igep2_dss_data); omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); igep2_flash_init(); igep2_leds_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 4273d06..b10db0e 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -407,10 +407,10 @@ static void __init igep3_wifi_bt_init(void) void __init igep3_wifi_bt_init(void) {} #endif -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -434,7 +434,7 @@ static void __init igep3_init(void) platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); igep3_flash_init(); igep3_leds_init(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 20c5dbe..33007fd 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -232,10 +232,12 @@ static struct omap_dss_board_info beagle_dss_data = { }; static struct regulator_consumer_supply beagle_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); -static struct regulator_consumer_supply beagle_vdvi_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply beagle_vdvi_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static void __init beagle_display_init(void) { @@ -422,8 +424,8 @@ static struct regulator_init_data beagle_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdvi_supply, + .num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies), + .consumer_supplies = beagle_vdvi_supplies, }; static struct twl4030_usb_data beagle_usb_data = { @@ -582,11 +584,11 @@ static void __init omap3beagle_flash_init(void) } } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -668,7 +670,7 @@ static void __init omap3_beagle_init(void) gpio_direction_output(170, true); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b65848c..5a1a916 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -542,7 +542,7 @@ static struct twl4030_codec_data omap3evm_codec_data = { }; static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_evm_vdac = { @@ -560,8 +560,10 @@ static struct regulator_init_data omap3_evm_vdac = { }; /* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_evm_vpll2_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static struct regulator_init_data omap3_evm_vpll2 = { .constraints = { @@ -573,8 +575,8 @@ static struct regulator_init_data omap3_evm_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_evm_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies), + .consumer_supplies = omap3_evm_vpll2_supplies, }; /* ads7846 on SPI */ @@ -731,11 +733,11 @@ static void __init omap3_evm_init_early(void) omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL); } -static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { +static struct usbhs_omap_board_data usbhs_bdata __initdata = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, /* PHY reset GPIO will be runtime programmed based on EVM version */ @@ -862,7 +864,7 @@ static void __init omap3_evm_init(void) /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); - ehci_pdata.reset_gpio_port[1] = 21; + usbhs_bdata.reset_gpio_port[1] = 21; /* EVM REV >= E can supply 500mA with EXTVBUS programming */ musb_board_data.power = 500; @@ -870,10 +872,10 @@ static void __init omap3_evm_init(void) } else { /* setup EHCI phy reset on MDC */ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); - ehci_pdata.reset_gpio_port[1] = 135; + usbhs_bdata.reset_gpio_port[1] = 135; } usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); ads7846_dev_init(); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 5386a819..07dba88 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -342,11 +342,12 @@ static struct regulator_consumer_supply pandora_vmmc3_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"); static struct regulator_consumer_supply pandora_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; static struct regulator_consumer_supply pandora_vcc_lcd_supply = @@ -669,11 +670,11 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_vwlan_device, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = 16, @@ -705,7 +706,7 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); usb_musb_init(&musb_board_data); gpmc_nand_init(&pandora_nand_data); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 15ede8b..a6e0b91 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -439,7 +439,7 @@ static struct twl4030_codec_data omap3stalker_codec_data = { }; static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_stalker_vdac = { @@ -457,8 +457,10 @@ static struct regulator_init_data omap3_stalker_vdac = { }; /* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_stalker_vpll2_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static struct regulator_init_data omap3_stalker_vpll2 = { .constraints = { @@ -471,8 +473,8 @@ static struct regulator_init_data omap3_stalker_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_stalker_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies), + .consumer_supplies = omap3_stalker_vpll2_supplies, }; static struct twl4030_platform_data omap3stalker_twldata = { @@ -595,10 +597,10 @@ static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; -static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -639,7 +641,7 @@ static void __init omap3_stalker_init(void) omap_serial_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); ads7846_dev_init(); omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 5554f58..127cb17 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -467,11 +467,11 @@ static void __init omap3touchbook_flash_init(void) } } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, @@ -530,7 +530,7 @@ static void __init omap3_touchbook_init(void) ARRAY_SIZE(omap3_ads7846_spi_board_info)); omap3_ads7846_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); omap3touchbook_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 80b8860..f3a7b10 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -34,11 +34,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <plat/display.h> #include <plat/board.h> #include <plat/common.h> #include <plat/usb.h> #include <plat/mmc.h> +#include <plat/panel-generic-dpi.h> #include "timer-gp.h" #include "hsmmc.h" @@ -49,6 +51,8 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 +#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -97,10 +101,10 @@ static void __init omap4_panda_init_early(void) omap2_init_common_devices(NULL, NULL); } -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = false, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = -EINVAL, @@ -142,7 +146,7 @@ static void __init omap4_ehci_init(void) gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); @@ -167,6 +171,7 @@ static struct twl4030_usb_data omap4_usbphy_data = { .phy_exit = omap4430_phy_exit, .phy_power = omap4430_phy_power, .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, }; static struct omap2_hsmmc_info mmc[] = { @@ -380,6 +385,12 @@ static struct regulator_init_data omap4_panda_vusb = { }, }; +static struct regulator_init_data omap4_panda_clk32kg = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + static struct twl4030_platform_data omap4_panda_twldata = { .irq_base = TWL6030_IRQ_BASE, .irq_end = TWL6030_IRQ_END, @@ -393,6 +404,7 @@ static struct twl4030_platform_data omap4_panda_twldata = { .vusb = &omap4_panda_vusb, .vaux2 = &omap4_panda_vaux2, .vaux3 = &omap4_panda_vaux3, + .clk32kg = &omap4_panda_clk32kg, .usb = &omap4_usbphy_data, }; @@ -404,6 +416,17 @@ static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = { .platform_data = &omap4_panda_twldata, }, }; + +/* + * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM + * is connected as I2C slave device, and can be accessed at address 0x50 + */ +static struct i2c_board_info __initdata panda_i2c_eeprom[] = { + { + I2C_BOARD_INFO("eeprom", 0x50), + }, +}; + static int __init omap4_panda_i2c_init(void) { /* @@ -413,7 +436,12 @@ static int __init omap4_panda_i2c_init(void) omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo, ARRAY_SIZE(omap4_panda_i2c_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); + /* + * Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz + */ + omap_register_i2c_bus(3, 100, panda_i2c_eeprom, + ARRAY_SIZE(panda_i2c_eeprom)); omap_register_i2c_bus(4, 400, NULL, 0); return 0; } @@ -433,6 +461,64 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + /* gpio 0 - TFP410 PD */ + OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3), + /* dispc2_data23 */ + OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data22 */ + OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data21 */ + OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data20 */ + OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data19 */ + OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data18 */ + OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data15 */ + OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data14 */ + OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data13 */ + OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data12 */ + OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data11 */ + OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data10 */ + OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data9 */ + OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data16 */ + OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data17 */ + OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_hsync */ + OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_pclk */ + OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_vsync */ + OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_de */ + OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data8 */ + OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data7 */ + OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data6 */ + OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data5 */ + OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data4 */ + OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data3 */ + OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data2 */ + OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data1 */ + OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), + /* dispc2_data0 */ + OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5), { .reg_offset = OMAP_MUX_TERMINATOR }, }; @@ -506,6 +592,128 @@ static inline void board_serial_init(void) } #endif +/* Display DVI */ +#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 + +static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev) +{ + gpio_set_value(dssdev->reset_gpio, 1); + return 0; +} + +static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev) +{ + gpio_set_value(dssdev->reset_gpio, 0); +} + +/* Using generic display panel */ +static struct panel_generic_dpi_data omap4_dvi_panel = { + .name = "generic", + .platform_enable = omap4_panda_enable_dvi, + .platform_disable = omap4_panda_disable_dvi, +}; + +struct omap_dss_device omap4_panda_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "generic_dpi_panel", + .data = &omap4_dvi_panel, + .phy.dpi.data_lines = 24, + .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +int __init omap4_panda_dvi_init(void) +{ + int r; + + /* Requesting TFP410 DVI GPIO and disabling it, at bootup */ + r = gpio_request_one(omap4_panda_dvi_device.reset_gpio, + GPIOF_OUT_INIT_LOW, "DVI PD"); + if (r) + pr_err("Failed to get DVI powerdown GPIO\n"); + + return r; +} + + +static void omap4_panda_hdmi_mux_init(void) +{ + /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ + omap_mux_init_signal("hdmi_hpd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_cec", + OMAP_PIN_INPUT_PULLUP); + /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ + omap_mux_init_signal("hdmi_ddc_scl", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_ddc_sda", + OMAP_PIN_INPUT_PULLUP); +} + +static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) +{ + int status; + + status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, + "hdmi_gpio_hpd"); + if (status) { + pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); + return status; + } + status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, + "hdmi_gpio_ls_oe"); + if (status) { + pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); + goto error1; + } + + return 0; + +error1: + gpio_free(HDMI_GPIO_HPD); + + return status; +} + +static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) +{ + gpio_free(HDMI_GPIO_LS_OE); + gpio_free(HDMI_GPIO_HPD); +} + +static struct omap_dss_device omap4_panda_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .platform_enable = omap4_panda_panel_enable_hdmi, + .platform_disable = omap4_panda_panel_disable_hdmi, + .channel = OMAP_DSS_CHANNEL_DIGIT, +}; + +static struct omap_dss_device *omap4_panda_dss_devices[] = { + &omap4_panda_dvi_device, + &omap4_panda_hdmi_device, +}; + +static struct omap_dss_board_info omap4_panda_dss_data = { + .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), + .devices = omap4_panda_dss_devices, + .default_device = &omap4_panda_dvi_device, +}; + +void omap4_panda_display_init(void) +{ + int r; + + r = omap4_panda_dvi_init(); + if (r) + pr_err("error initializing panda DVI\n"); + + omap4_panda_hdmi_mux_init(); + omap_display_init(&omap4_panda_dss_data); +} + static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; @@ -524,6 +732,7 @@ static void __init omap4_panda_init(void) omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); usb_musb_init(&musb_board_data); + omap4_panda_display_init(); } static void __init omap4_panda_map_io(void) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 60f8db3..59ca333 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -28,6 +28,8 @@ #include <linux/platform_device.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/spi/spi.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -41,10 +43,14 @@ #include <plat/board.h> #include <plat/common.h> +#include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <mach/gpio.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> +#include <plat/mcspi.h> +#include <plat/mux.h> #include <plat/usb.h> #include "mux.h" @@ -68,8 +74,6 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <plat/mcspi.h> -#include <linux/spi/spi.h> #include <linux/spi/ads7846.h> static struct omap2_mcspi_device_config ads7846_mcspi_config = { @@ -94,16 +98,32 @@ static struct ads7846_platform_data ads7846_config = { .keep_vref_on = 1, }; -static struct spi_board_info overo_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), - .platform_data = &ads7846_config, - } +/* fixed regulator for ads7846 */ +static struct regulator_consumer_supply ads7846_supply = + REGULATOR_SUPPLY("vcc", "spi1.0"); + +static struct regulator_init_data vads7846_regulator = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ads7846_supply, +}; + +static struct fixed_voltage_config vads7846 = { + .supply_name = "vads7846", + .microvolts = 3300000, /* 3.3V */ + .gpio = -EINVAL, + .startup_delay = 0, + .init_data = &vads7846_regulator, +}; + +static struct platform_device vads7846_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vads7846, + }, }; static void __init overo_ads7846_init(void) @@ -116,8 +136,7 @@ static void __init overo_ads7846_init(void) return; } - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); + platform_device_register(&vads7846_device); } #else @@ -233,6 +252,137 @@ static inline void __init overo_init_smsc911x(void) static inline void __init overo_init_smsc911x(void) { return; } #endif +/* DSS */ +static int lcd_enabled; +static int dvi_enabled; + +#define OVERO_GPIO_LCD_EN 144 +#define OVERO_GPIO_LCD_BL 145 + +static void __init overo_display_init(void) +{ + if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && + (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) + gpio_export(OVERO_GPIO_LCD_EN, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_LCD_EN\n"); + + if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && + (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) + gpio_export(OVERO_GPIO_LCD_BL, 0); + else + printk(KERN_ERR "could not obtain gpio for " + "OVERO_GPIO_LCD_BL\n"); +} + +static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + dvi_enabled = 1; + + return 0; +} + +static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) +{ + dvi_enabled = 0; +} + +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = overo_panel_enable_dvi, + .platform_disable = overo_panel_disable_dvi, +}; + +static struct omap_dss_device overo_dvi_device = { + .name = "dvi", + .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, + .phy.dpi.data_lines = 24, +}; + +static struct omap_dss_device overo_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +static int overo_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + + gpio_set_value(OVERO_GPIO_LCD_EN, 1); + gpio_set_value(OVERO_GPIO_LCD_BL, 1); + lcd_enabled = 1; + return 0; +} + +static void overo_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + gpio_set_value(OVERO_GPIO_LCD_EN, 0); + gpio_set_value(OVERO_GPIO_LCD_BL, 0); + lcd_enabled = 0; +} + +static struct panel_generic_dpi_data lcd43_panel = { + .name = "samsung_lte430wq_f0c", + .platform_enable = overo_panel_enable_lcd, + .platform_disable = overo_panel_disable_lcd, +}; + +static struct omap_dss_device overo_lcd43_device = { + .name = "lcd43", + .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &lcd43_panel, + .phy.dpi.data_lines = 24, +}; + +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) +static struct omap_dss_device overo_lcd35_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "lcd35", + .driver_name = "lgphilips_lb035q02_panel", + .phy.dpi.data_lines = 24, + .platform_enable = overo_panel_enable_lcd, + .platform_disable = overo_panel_disable_lcd, +}; +#endif + +static struct omap_dss_device *overo_dss_devices[] = { + &overo_dvi_device, + &overo_tv_device, +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) + &overo_lcd35_device, +#endif + &overo_lcd43_device, +}; + +static struct omap_dss_board_info overo_dss_data = { + .num_devices = ARRAY_SIZE(overo_dss_devices), + .devices = overo_dss_devices, + .default_device = &overo_dvi_device, +}; + +static struct regulator_consumer_supply overo_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); + +static struct regulator_consumer_supply overo_vdds_dsi_supply[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; + static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -323,6 +473,93 @@ static struct regulator_consumer_supply overo_vmmc1_supply = { .supply = "vmmc", }; +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +#include <linux/leds.h> + +static struct gpio_led gpio_leds[] = { + { + .name = "overo:red:gpio21", + .default_trigger = "heartbeat", + .gpio = 21, + .active_low = true, + }, + { + .name = "overo:blue:gpio22", + .default_trigger = "none", + .gpio = 22, + .active_low = true, + }, + { + .name = "overo:blue:COM", + .default_trigger = "mmc0", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_leds_pdata = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device gpio_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_leds_pdata, + }, +}; + +static void __init overo_init_led(void) +{ + platform_device_register(&gpio_leds_device); +} + +#else +static inline void __init overo_init_led(void) { return; } +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_0, + .gpio = 23, + .desc = "button0", + .wakeup = 1, + }, + { + .code = BTN_1, + .gpio = 14, + .desc = "button1", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_keys_pdata = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_keys_pdata, + }, +}; + +static void __init overo_init_keys(void) +{ + platform_device_register(&gpio_keys_device); +} + +#else +static inline void __init overo_init_keys(void) { return; } +#endif + static int overo_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -330,6 +567,11 @@ static int overo_twl_gpio_setup(struct device *dev, overo_vmmc1_supply.dev = mmc[0].dev; +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; +#endif + return 0; } @@ -337,6 +579,7 @@ static struct twl4030_gpio_platform_data overo_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, .setup = overo_twl_gpio_setup, }; @@ -358,6 +601,35 @@ static struct regulator_init_data overo_vmmc1 = { .consumer_supplies = &overo_vmmc1_supply, }; +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data overo_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &overo_vdda_dac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data overo_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply), + .consumer_supplies = overo_vdds_dsi_supply, +}; + static struct twl4030_codec_audio_data overo_audio_data; static struct twl4030_codec_data overo_codec_data = { @@ -365,8 +637,6 @@ static struct twl4030_codec_data overo_codec_data = { .audio = &overo_audio_data, }; -/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */ - static struct twl4030_platform_data overo_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -374,6 +644,8 @@ static struct twl4030_platform_data overo_twldata = { .usb = &overo_usb_data, .codec = &overo_codec_data, .vmmc1 = &overo_vmmc1, + .vdac = &overo_vdac, + .vpll2 = &overo_vpll2, }; static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { @@ -394,18 +666,38 @@ static int __init overo_i2c_init(void) return 0; } -static struct platform_device overo_lcd_device = { - .name = "overo_lcd", - .id = -1, -}; - -static struct omap_lcd_config overo_lcd_config __initdata = { - .ctrl_name = "internal", +static struct spi_board_info overo_spi_board_info[] __initdata = { +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { + .modalias = "ads7846", + .bus_num = 1, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), + .platform_data = &ads7846_config, + }, +#endif +#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ + defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) + { + .modalias = "lgphilips_lb035q02_panel-spi", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 500000, + .mode = SPI_MODE_3, + }, +#endif }; -static struct omap_board_config_kernel overo_config[] __initdata = { - { OMAP_TAG_LCD, &overo_lcd_config }, -}; +static int __init overo_spi_init(void) +{ + overo_ads7846_init(); + spi_register_board_info(overo_spi_board_info, + ARRAY_SIZE(overo_spi_board_info)); + return 0; +} static void __init overo_init_early(void) { @@ -414,15 +706,10 @@ static void __init overo_init_early(void) mt46h32m32lf6_sdrc_params); } -static struct platform_device *overo_devices[] __initdata = { - &overo_lcd_device, -}; - -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, - +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, @@ -444,16 +731,18 @@ static struct omap_musb_board_data musb_board_data = { static void __init overo_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_board_config = overo_config; - omap_board_config_size = ARRAY_SIZE(overo_config); overo_i2c_init(); - platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); + omap_display_init(&overo_dss_data); omap_serial_init(); overo_flash_init(); usb_musb_init(&musb_board_data); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); + overo_spi_init(); overo_ads7846_init(); overo_init_smsc911x(); + overo_display_init(); + overo_init_led(); + overo_init_keys(); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 5f1900c..bbcb677 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -372,7 +372,7 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = { }; static struct regulator_consumer_supply rx51_vdac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss"), + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), }; static struct regulator_init_data rx51_vaux1 = { diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 448ab60..8dee754 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -226,11 +226,13 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply zoom_vpll2_supply = - REGULATOR_SUPPLY("vdds_dsi", "omapdss"); +static struct regulator_consumer_supply zoom_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static struct regulator_consumer_supply zoom_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss"); + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); static struct regulator_init_data zoom_vpll2 = { .constraints = { @@ -241,8 +243,8 @@ static struct regulator_init_data zoom_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vpll2_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vpll2_supplies), + .consumer_supplies = zoom_vpll2_supplies, }; static struct regulator_init_data zoom_vdac = { diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 7e895ff..4b133d7 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -105,10 +105,10 @@ static struct mtd_partition zoom_nand_partitions[] = { }, }; -static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { - .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, - .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, - .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, .phy_reset = true, .reset_gpio_port[0] = -EINVAL, .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO, @@ -122,7 +122,7 @@ static void __init omap_zoom_init(void) } else if (machine_is_omap_zoom3()) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); - usb_ehci_init(&ehci_pdata); + usbhs_init(&usbhs_bdata); } board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index b6f65d4..2926d02 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1804,10 +1804,10 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_242X), CLK(NULL, "gfx_ick", &gfx_ick, CK_242X), /* DSS domain clocks */ - CLK("omapdss", "ick", &dss_ick, CK_242X), - CLK("omapdss", "dss1_fck", &dss1_fck, CK_242X), - CLK("omapdss", "dss2_fck", &dss2_fck, CK_242X), - CLK("omapdss", "tv_fck", &dss_54m_fck, CK_242X), + CLK("omapdss_dss", "ick", &dss_ick, CK_242X), + CLK("omapdss_dss", "fck", &dss1_fck, CK_242X), + CLK("omapdss_dss", "sys_clk", &dss2_fck, CK_242X), + CLK("omapdss_dss", "tv_clk", &dss_54m_fck, CK_242X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_242X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index bba0183..0c79d39 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1894,10 +1894,10 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ - CLK("omapdss", "ick", &dss_ick, CK_243X), - CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X), - CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X), - CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X), + CLK("omapdss_dss", "ick", &dss_ick, CK_243X), + CLK("omapdss_dss", "fck", &dss1_fck, CK_243X), + CLK("omapdss_dss", "sys_clk", &dss2_fck, CK_243X), + CLK("omapdss_dss", "tv_clk", &dss_54m_fck, CK_243X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index d905ecc..75b119b 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3285,7 +3285,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), @@ -3321,7 +3321,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX), CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX), CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX), CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX), @@ -3356,22 +3356,31 @@ static struct omap_clk omap3xxx_clks[] = { CLK("omap_rng", "ick", &rng_ick, CK_34XX | CK_36XX), CLK(NULL, "sha11_ick", &sha11_ick, CK_34XX | CK_36XX), CLK(NULL, "des1_ick", &des1_ick, CK_34XX | CK_36XX), - CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omapdss", "tv_fck", &dss_tv_fck, CK_3XXX), - CLK("omapdss", "video_fck", &dss_96m_fck, CK_3XXX), - CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_3XXX), - CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1), - CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("omapdss_dss", "fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapdss_dss", "fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("omapdss_dss", "tv_clk", &dss_tv_fck, CK_3XXX), + CLK("omapdss_dss", "video_clk", &dss_96m_fck, CK_3XXX), + CLK("omapdss_dss", "sys_clk", &dss2_alwon_fck, CK_3XXX), + CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX), CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX), CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK("usbhs-omap.0", "utmi_p1_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "utmi_p2_gfclk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX), + CLK("usbhs-omap.0", "init_60m_fclk", &dummy_ck, CK_3XXX), CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index f1fedb7..276992d 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3114,11 +3114,16 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), CLK(NULL, "dmic_fck", &dmic_fck, CK_443X), CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), - CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X), - CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X), - CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X), - CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X), - CLK(NULL, "dss_fck", &dss_fck, CK_443X), + CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X), + CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X), + CLK("omapdss_dss", "dss_clk", &dss_dss_clk, CK_443X), + CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X), + CLK("omapdss_dss", "fck", &dss_fck, CK_443X), + /* + * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility + * with OMAP2/3. + */ + CLK("omapdss_dss", "ick", &dummy_ck, CK_443X), CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), CLK(NULL, "emif2_fck", &emif2_fck, CK_443X), @@ -3205,7 +3210,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), CLK(NULL, "uart4_fck", &uart4_fck, CK_443X), CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X), - CLK("ehci-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X), + CLK("usbhs-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X), CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X), @@ -3217,8 +3222,8 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X), - CLK("ehci-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X), - CLK("ehci-omap.0", "usbhost_ick", &dummy_ck, CK_443X), + CLK("usbhs-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X), + CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), @@ -3227,8 +3232,8 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X), - CLK("ehci-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X), - CLK("ehci-omap.0", "usbtll_fck", &dummy_ck, CK_443X), + CLK("usbhs-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X), + CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), CLK(NULL, "usim_ck", &usim_ck, CK_443X), CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), CLK(NULL, "usim_fck", &usim_fck, CK_443X), diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d478f53..84d1b73 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -35,6 +35,7 @@ #include "mux.h" #include "control.h" +#include "devices.h" #define L3_MODULES_MAX_LEN 12 #define L3_MODULES 3 @@ -102,7 +103,7 @@ postcore_initcall(omap4_l3_init); #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) -static struct resource cam_resources[] = { +static struct resource omap2cam_resources[] = { { .start = OMAP24XX_CAMERA_BASE, .end = OMAP24XX_CAMERA_BASE + 0xfff, @@ -114,19 +115,13 @@ static struct resource cam_resources[] = { } }; -static struct platform_device omap_cam_device = { +static struct platform_device omap2cam_device = { .name = "omap24xxcam", .id = -1, - .num_resources = ARRAY_SIZE(cam_resources), - .resource = cam_resources, + .num_resources = ARRAY_SIZE(omap2cam_resources), + .resource = omap2cam_resources, }; - -static inline void omap_init_camera(void) -{ - platform_device_register(&omap_cam_device); -} - -#elif defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE) +#endif static struct resource omap3isp_resources[] = { { @@ -135,11 +130,6 @@ static struct resource omap3isp_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = OMAP3430_ISP_CBUFF_BASE, - .end = OMAP3430_ISP_CBUFF_END, - .flags = IORESOURCE_MEM, - }, - { .start = OMAP3430_ISP_CCP2_BASE, .end = OMAP3430_ISP_CCP2_END, .flags = IORESOURCE_MEM, @@ -175,13 +165,33 @@ static struct resource omap3isp_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = OMAP3430_ISP_CSI2A_BASE, - .end = OMAP3430_ISP_CSI2A_END, + .start = OMAP3430_ISP_CSI2A_REGS1_BASE, + .end = OMAP3430_ISP_CSI2A_REGS1_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3430_ISP_CSIPHY2_BASE, + .end = OMAP3430_ISP_CSIPHY2_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3630_ISP_CSI2A_REGS2_BASE, + .end = OMAP3630_ISP_CSI2A_REGS2_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3630_ISP_CSI2C_REGS1_BASE, + .end = OMAP3630_ISP_CSI2C_REGS1_END, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP3630_ISP_CSIPHY1_BASE, + .end = OMAP3630_ISP_CSIPHY1_END, .flags = IORESOURCE_MEM, }, { - .start = OMAP3430_ISP_CSI2PHY_BASE, - .end = OMAP3430_ISP_CSI2PHY_END, + .start = OMAP3630_ISP_CSI2C_REGS2_BASE, + .end = OMAP3630_ISP_CSI2C_REGS2_END, .flags = IORESOURCE_MEM, }, { @@ -197,15 +207,19 @@ static struct platform_device omap3isp_device = { .resource = omap3isp_resources, }; -static inline void omap_init_camera(void) +int omap3_init_camera(struct isp_platform_data *pdata) { - platform_device_register(&omap3isp_device); + omap3isp_device.dev.platform_data = pdata; + return platform_device_register(&omap3isp_device); } -#else + static inline void omap_init_camera(void) { -} +#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) + if (cpu_is_omap24xx()) + platform_device_register(&omap2cam_device); #endif +} struct omap_device_pm_latency omap_keyboard_latency[] = { { diff --git a/arch/arm/mach-omap2/devices.h b/arch/arm/mach-omap2/devices.h new file mode 100644 index 0000000..f61eb6e --- /dev/null +++ b/arch/arm/mach-omap2/devices.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-omap2/devices.h + * + * OMAP2 platform device setup/initialization + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H +#define __ARCH_ARM_MACH_OMAP_DEVICES_H + +struct isp_platform_data; + +int omap3_init_camera(struct isp_platform_data *pdata); + +#endif diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index b18db84..256d23f 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -23,6 +23,8 @@ #include <linux/err.h> #include <plat/display.h> +#include <plat/omap_hwmod.h> +#include <plat/omap_device.h> static struct platform_device omap_display_device = { .name = "omapdss", @@ -32,9 +34,87 @@ static struct platform_device omap_display_device = { }, }; +static struct omap_device_pm_latency omap_dss_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +/* oh_core is used for getting opt-clocks */ +static struct omap_hwmod *oh_core; + +static bool opt_clock_available(const char *clk_role) +{ + int i; + + for (i = 0; i < oh_core->opt_clks_cnt; i++) { + if (!strcmp(oh_core->opt_clks[i].role, clk_role)) + return true; + } + return false; +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; + struct omap_hwmod *oh; + struct omap_device *od; + int i; + struct omap_display_platform_data pdata; + + /* + * omap: valid DSS hwmod names + * omap2,3,4: dss_core, dss_dispc, dss_rfbi, dss_venc + * omap3,4: dss_dsi1 + * omap4: dss_dsi2, dss_hdmi + */ + char *oh_name[] = { "dss_core", "dss_dispc", "dss_rfbi", "dss_venc", + "dss_dsi1", "dss_dsi2", "dss_hdmi" }; + char *dev_name[] = { "omapdss_dss", "omapdss_dispc", "omapdss_rfbi", + "omapdss_venc", "omapdss_dsi1", "omapdss_dsi2", + "omapdss_hdmi" }; + int oh_count; + + memset(&pdata, 0, sizeof(pdata)); + + if (cpu_is_omap24xx()) + oh_count = ARRAY_SIZE(oh_name) - 3; + /* last 3 hwmod dev in oh_name are not available for omap2 */ + else if (cpu_is_omap44xx()) + oh_count = ARRAY_SIZE(oh_name); + else + oh_count = ARRAY_SIZE(oh_name) - 2; + /* last 2 hwmod dev in oh_name are not available for omap3 */ + + /* opt_clks are always associated with dss hwmod */ + oh_core = omap_hwmod_lookup("dss_core"); + if (!oh_core) { + pr_err("Could not look up dss_core.\n"); + return -ENODEV; + } + + pdata.board_data = board_data; + pdata.board_data->get_last_off_on_transaction_id = NULL; + pdata.opt_clock_available = opt_clock_available; + + for (i = 0; i < oh_count; i++) { + oh = omap_hwmod_lookup(oh_name[i]); + if (!oh) { + pr_err("Could not look up %s\n", oh_name[i]); + return -ENODEV; + } + + od = omap_device_build(dev_name[i], -1, oh, &pdata, + sizeof(struct omap_display_platform_data), + omap_dss_latency, + ARRAY_SIZE(omap_dss_latency), 0); + + if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n", + oh_name[i])) + return -ENODEV; + } omap_display_device.dev.platform_data = board_data; r = platform_device_register(&omap_display_device); diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index e1b0f17..48adfe9 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -19,6 +19,9 @@ #define UART_OFFSET(addr) ((addr) & 0x00ffffff) +#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET) +#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET) + .pushsection .data omap_uart_phys: .word 0 omap_uart_virt: .word 0 @@ -36,7 +39,7 @@ omap_uart_lsr: .word 0 /* Use omap_uart_phys/virt if already configured */ 10: mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? - ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rp, =omap_uart_phys @ MMU enabled add \rv, \rp, #4 @ omap_uart_virt ldr \rp, [\rp, #0] @@ -49,7 +52,7 @@ omap_uart_lsr: .word 0 mrc p15, 0, \rp, c1, c0 tst \rp, #1 @ MMU enabled? ldreq \rp, =OMAP_UART_INFO @ MMU not enabled - ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ @@ -106,7 +109,7 @@ omap_uart_lsr: .word 0 95: ldr \rp, =ZOOM_UART_BASE mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? - ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rv, =omap_uart_phys @ MMU enabled str \rp, [\rv, #0] ldr \rp, =ZOOM_UART_VIRT @@ -121,7 +124,7 @@ omap_uart_lsr: .word 0 98: add \rp, \rp, #0x48000000 @ phys base mrc p15, 0, \rv, c1, c0 tst \rv, #1 @ MMU enabled? - ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled ldrne \rv, =omap_uart_phys @ MMU enabled str \rp, [\rv, #0] sub \rp, \rp, #0x48000000 @ phys base @@ -143,7 +146,7 @@ omap_uart_lsr: .word 0 .macro busyuart,rd,rx 1001: mrc p15, 0, \rd, c1, c0 tst \rd, #1 @ MMU enabled? - ldreq \rd, =__virt_to_phys(omap_uart_lsr) @ MMU not enabled + ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled ldrne \rd, =omap_uart_lsr @ MMU enabled ldr \rd, [\rd, #0] ldrb \rd, [\rx, \rd] diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 1926864..9ef8c29 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -52,6 +52,12 @@ static void omap4_l2x0_disable(void) omap_smc1(0x102, 0x0); } +static void omap4_l2x0_set_debug(unsigned long val) +{ + /* Program PL310 L2 Cache controller debug register */ + omap_smc1(0x100, val); +} + static int __init omap_l2_cache_init(void) { u32 aux_ctrl = 0; @@ -99,6 +105,7 @@ static int __init omap_l2_cache_init(void) * specific one */ outer_cache.disable = omap4_l2x0_disable; + outer_cache.set_debug = omap4_l2x0_set_debug; return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 6282346..8eb3ce1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1168,11 +1168,6 @@ static struct omap_hwmod_class omap2420_dss_hwmod_class = { .sysc = &omap2420_dss_sysc, }; -/* dss */ -static struct omap_hwmod_irq_info omap2420_dss_irqs[] = { - { .irq = 25 }, -}; - static struct omap_hwmod_dma_info omap2420_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, }; @@ -1221,8 +1216,6 @@ static struct omap_hwmod omap2420_dss_core_hwmod = { .name = "dss_core", .class = &omap2420_dss_hwmod_class, .main_clk = "dss1_fck", /* instead of dss_fck */ - .mpu_irqs = omap2420_dss_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dss_irqs), .sdma_reqs = omap2420_dss_sdma_chs, .sdma_reqs_cnt = ARRAY_SIZE(omap2420_dss_sdma_chs), .prcm = { @@ -1265,6 +1258,10 @@ static struct omap_hwmod_class omap2420_dispc_hwmod_class = { .sysc = &omap2420_dispc_sysc, }; +static struct omap_hwmod_irq_info omap2420_dispc_irqs[] = { + { .irq = 25 }, +}; + static struct omap_hwmod_addr_space omap2420_dss_dispc_addrs[] = { { .pa_start = 0x48050400, @@ -1297,6 +1294,8 @@ static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = { static struct omap_hwmod omap2420_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap2420_dispc_hwmod_class, + .mpu_irqs = omap2420_dispc_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dispc_irqs), .main_clk = "dss1_fck", .prcm = { .omap2 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 0fdf2ca..a860fb5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1268,10 +1268,6 @@ static struct omap_hwmod_class omap2430_dss_hwmod_class = { .sysc = &omap2430_dss_sysc, }; -/* dss */ -static struct omap_hwmod_irq_info omap2430_dss_irqs[] = { - { .irq = 25 }, -}; static struct omap_hwmod_dma_info omap2430_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, }; @@ -1314,8 +1310,6 @@ static struct omap_hwmod omap2430_dss_core_hwmod = { .name = "dss_core", .class = &omap2430_dss_hwmod_class, .main_clk = "dss1_fck", /* instead of dss_fck */ - .mpu_irqs = omap2430_dss_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_dss_irqs), .sdma_reqs = omap2430_dss_sdma_chs, .sdma_reqs_cnt = ARRAY_SIZE(omap2430_dss_sdma_chs), .prcm = { @@ -1358,6 +1352,10 @@ static struct omap_hwmod_class omap2430_dispc_hwmod_class = { .sysc = &omap2430_dispc_sysc, }; +static struct omap_hwmod_irq_info omap2430_dispc_irqs[] = { + { .irq = 25 }, +}; + static struct omap_hwmod_addr_space omap2430_dss_dispc_addrs[] = { { .pa_start = 0x48050400, @@ -1384,6 +1382,8 @@ static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = { static struct omap_hwmod omap2430_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap2430_dispc_hwmod_class, + .mpu_irqs = omap2430_dispc_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap2430_dispc_irqs), .main_clk = "dss1_fck", .prcm = { .omap2 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c819c30..b98e2dfc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1480,11 +1480,6 @@ static struct omap_hwmod_class omap3xxx_dss_hwmod_class = { .sysc = &omap3xxx_dss_sysc, }; -/* dss */ -static struct omap_hwmod_irq_info omap3xxx_dss_irqs[] = { - { .irq = 25 }, -}; - static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .name = "dsi1", .dma_req = 74 }, @@ -1548,7 +1543,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = { static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "tv_clk", .clk = "dss_tv_fck" }, - { .role = "dssclk", .clk = "dss_96m_fck" }, + { .role = "video_clk", .clk = "dss_96m_fck" }, { .role = "sys_clk", .clk = "dss2_alwon_fck" }, }; @@ -1556,8 +1551,6 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = { .name = "dss_core", .class = &omap3xxx_dss_hwmod_class, .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ - .mpu_irqs = omap3xxx_dss_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dss_irqs), .sdma_reqs = omap3xxx_dss_sdma_chs, .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_dss_sdma_chs), @@ -1584,8 +1577,6 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .name = "dss_core", .class = &omap3xxx_dss_hwmod_class, .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ - .mpu_irqs = omap3xxx_dss_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dss_irqs), .sdma_reqs = omap3xxx_dss_sdma_chs, .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_dss_sdma_chs), @@ -1631,6 +1622,10 @@ static struct omap_hwmod_class omap3xxx_dispc_hwmod_class = { .sysc = &omap3xxx_dispc_sysc, }; +static struct omap_hwmod_irq_info omap3xxx_dispc_irqs[] = { + { .irq = 25 }, +}; + static struct omap_hwmod_addr_space omap3xxx_dss_dispc_addrs[] = { { .pa_start = 0x48050400, @@ -1664,6 +1659,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap3xxx_dispc_hwmod_class, + .mpu_irqs = omap3xxx_dispc_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dispc_irqs), .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { @@ -1689,6 +1686,10 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { .name = "dsi", }; +static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { + { .irq = 25 }, +}; + /* dss_dsi1 */ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { { @@ -1722,6 +1723,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = { static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .name = "dss_dsi1", .class = &omap3xxx_dsi_hwmod_class, + .mpu_irqs = omap3xxx_dsi1_irqs, + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dsi1_irqs), .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index f172ec0..e2e605f 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -44,6 +44,7 @@ static struct clk *phyclk, *clk48m, *clk32k; static void __iomem *ctrl_base; +static int usbotghs_control; int omap4430_phy_init(struct device *dev) { @@ -104,13 +105,6 @@ int omap4430_phy_set_clk(struct device *dev, int on) int omap4430_phy_power(struct device *dev, int ID, int on) { if (on) { - /* enabled the clocks */ - omap4430_phy_set_clk(dev, 1); - /* power on the phy */ - if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) { - __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF); - mdelay(200); - } if (ID) /* enable VBUS valid, IDDIG groung */ __raw_writel(AVALID | VBUSVALID, ctrl_base + @@ -126,10 +120,31 @@ int omap4430_phy_power(struct device *dev, int ID, int on) /* Enable session END and IDIG to high impedence. */ __raw_writel(SESSEND | IDDIG, ctrl_base + USBOTGHS_CONTROL); + } + return 0; +} + +int omap4430_phy_suspend(struct device *dev, int suspend) +{ + if (suspend) { /* Disable the clocks */ omap4430_phy_set_clk(dev, 0); /* Power down the phy */ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); + + /* save the context */ + usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL); + } else { + /* Enable the internel phy clcoks */ + omap4430_phy_set_clk(dev, 1); + /* power on the phy */ + if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) { + __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF); + mdelay(200); + } + + /* restore the context */ + __raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL); } return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index f4a5f71..797bfd1 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -92,7 +92,7 @@ extern void omap24xx_idle_loop_suspend(void); extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); extern void omap34xx_cpu_suspend(u32 *addr, int save_state); -extern void save_secure_ram_context(u32 *addr); +extern int save_secure_ram_context(u32 *addr); extern void omap3_save_scratchpad_contents(void); extern unsigned int omap24xx_idle_loop_suspend_sz; diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index c7780cc..b5071a4 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -47,6 +47,7 @@ * Note: This code get's copied to internal SRAM at boot. When the OMAP * wakes up it continues execution at the point it went to sleep. */ + .align 3 ENTRY(omap24xx_idle_loop_suspend) stmfd sp!, {r0, lr} @ save registers on stack mov r0, #0 @ clear for mcr setup @@ -82,6 +83,7 @@ ENTRY(omap24xx_idle_loop_suspend_sz) * The DLL load value is not kept in RETENTION or OFF. It needs to be restored * at wake */ + .align 3 ENTRY(omap24xx_cpu_suspend) stmfd sp!, {r0 - r12, lr} @ save registers on stack mov r3, #0x0 @ clear for mcr call diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index e60ac1f..63f1066 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -131,6 +131,7 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore) .text /* Function to call rom code to save secure ram context */ + .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r1-r12, lr} @ save registers on stack adr r3, api_params @ r3 points to parameters @@ -184,6 +185,7 @@ ENTRY(save_secure_ram_context_sz) * depending on the low power mode (non-OFF vs OFF modes), * cf. 'Resume path for xxx mode' comments. */ + .align 3 ENTRY(omap34xx_cpu_suspend) stmfd sp!, {r0-r12, lr} @ save registers on stack diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 055310c..ff9b9db 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -39,6 +39,7 @@ .text + .align 3 ENTRY(omap242x_sram_ddr_init) stmfd sp!, {r0 - r12, lr} @ save registers on stack @@ -143,6 +144,7 @@ ENTRY(omap242x_sram_ddr_init_sz) * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR] * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0 */ + .align 3 ENTRY(omap242x_sram_reprogram_sdrc) stmfd sp!, {r0 - r10, lr} @ save registers on stack mov r3, #0x0 @ clear for mrc call @@ -238,6 +240,7 @@ ENTRY(omap242x_sram_reprogram_sdrc_sz) /* * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode. */ + .align 3 ENTRY(omap242x_sram_set_prcm) stmfd sp!, {r0-r12, lr} @ regs to stack adr r4, pbegin @ addr of preload start diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index f900758..7673020 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -39,6 +39,7 @@ .text + .align 3 ENTRY(omap243x_sram_ddr_init) stmfd sp!, {r0 - r12, lr} @ save registers on stack @@ -143,6 +144,7 @@ ENTRY(omap243x_sram_ddr_init_sz) * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR] * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0 */ + .align 3 ENTRY(omap243x_sram_reprogram_sdrc) stmfd sp!, {r0 - r10, lr} @ save registers on stack mov r3, #0x0 @ clear for mrc call @@ -238,6 +240,7 @@ ENTRY(omap243x_sram_reprogram_sdrc_sz) /* * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode. */ + .align 3 ENTRY(omap243x_sram_set_prcm) stmfd sp!, {r0-r12, lr} @ regs to stack adr r4, pbegin @ addr of preload start diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 1078bfb..6f5849a 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -117,6 +117,7 @@ * since it will cause the ARM MMU to attempt to walk the page tables. * These crashes may be intermittent. */ + .align 3 ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c index 954682e..31c0ac4 100644 --- a/arch/arm/mach-omap2/timer-mpu.c +++ b/arch/arm/mach-omap2/timer-mpu.c @@ -26,9 +26,14 @@ /* * Setup the local clock events for a CPU. */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { + /* Local timers are not supprted on OMAP4430 ES1.0 */ + if (omap_rev() == OMAP4430_REV_ES1_0) + return -ENXIO; + evt->irq = OMAP44XX_IRQ_LOCALTIMER; twd_timer_setup(evt); + return 0; } diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-host.c index 25eeada..89ae298 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -1,14 +1,15 @@ /* - * linux/arch/arm/mach-omap2/usb-ehci.c + * usb-host.c - OMAP USB Host * * This file will contain the board specific details for the - * Synopsys EHCI host controller on OMAP3430 + * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards * - * Copyright (C) 2007 Texas Instruments + * Copyright (C) 2007-2011 Texas Instruments * Author: Vikram Pandita <vikram.pandita@ti.com> + * Author: Keshava Munegowda <keshava_mgowda@ti.com> * * Generalization by: - * Felipe Balbi <felipe.balbi@nokia.com> + * Felipe Balbi <balbi@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,7 +20,7 @@ #include <linux/errno.h> #include <linux/delay.h> #include <linux/platform_device.h> -#include <linux/clk.h> +#include <linux/slab.h> #include <linux/dma-mapping.h> #include <asm/io.h> @@ -30,44 +31,56 @@ #include "mux.h" -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) +#ifdef CONFIG_MFD_OMAP_USB_HOST -static struct resource ehci_resources[] = { +#define OMAP_USBHS_DEVICE "usbhs-omap" + +static struct resource usbhs_resources[] = { + { + .name = "uhh", + .flags = IORESOURCE_MEM, + }, { + .name = "tll", .flags = IORESOURCE_MEM, }, { + .name = "ehci", .flags = IORESOURCE_MEM, }, { + .name = "ehci-irq", + .flags = IORESOURCE_IRQ, + }, + { + .name = "ohci", .flags = IORESOURCE_MEM, }, - { /* general IRQ */ - .flags = IORESOURCE_IRQ, + { + .name = "ohci-irq", + .flags = IORESOURCE_IRQ, } }; -static u64 ehci_dmamask = ~(u32)0; -static struct platform_device ehci_device = { - .name = "ehci-omap", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = NULL, - }, - .num_resources = ARRAY_SIZE(ehci_resources), - .resource = ehci_resources, +static struct platform_device usbhs_device = { + .name = OMAP_USBHS_DEVICE, + .id = 0, + .num_resources = ARRAY_SIZE(usbhs_resources), + .resource = usbhs_resources, }; +static struct usbhs_omap_platform_data usbhs_data; +static struct ehci_hcd_omap_platform_data ehci_data; +static struct ohci_hcd_omap_platform_data ohci_data; + /* MUX settings for EHCI pins */ /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST */ -static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) +static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); @@ -81,7 +94,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb1_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb1_tll_clk", @@ -107,14 +120,14 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb1_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); @@ -136,7 +149,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb2_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb2_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb2_tll_clk", @@ -162,17 +175,17 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb2_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } switch (port_mode[2]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("hsusb3_tll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hsusb3_tll_clk", @@ -198,7 +211,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("hsusb3_tll_data7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -207,10 +220,10 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) return; } -static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) +static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("usbb1_ulpiphy_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("usbb1_ulpiphy_clk", @@ -236,7 +249,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb1_ulpiphy_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("usbb1_ulpitll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("usbb1_ulpitll_clk", @@ -262,12 +275,12 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb1_ulpitll_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: default: break; } switch (port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: + case OMAP_EHCI_PORT_MODE_PHY: omap_mux_init_signal("usbb2_ulpiphy_stp", OMAP_PIN_OUTPUT); omap_mux_init_signal("usbb2_ulpiphy_clk", @@ -293,7 +306,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb2_ulpiphy_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_TLL: + case OMAP_EHCI_PORT_MODE_TLL: omap_mux_init_signal("usbb2_ulpitll_stp", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("usbb2_ulpitll_clk", @@ -319,90 +332,13 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode) omap_mux_init_signal("usbb2_ulpitll_dat7", OMAP_PIN_INPUT_PULLDOWN); break; - case EHCI_HCD_OMAP_MODE_UNKNOWN: + case OMAP_USBHS_PORT_MODE_UNUSED: default: break; } } -void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) -{ - platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); - - /* Setup Pin IO MUX for EHCI */ - if (cpu_is_omap34xx()) { - ehci_resources[0].start = OMAP34XX_EHCI_BASE; - ehci_resources[0].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; - ehci_resources[1].start = OMAP34XX_UHH_CONFIG_BASE; - ehci_resources[1].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; - ehci_resources[2].start = OMAP34XX_USBTLL_BASE; - ehci_resources[2].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; - ehci_resources[3].start = INT_34XX_EHCI_IRQ; - setup_ehci_io_mux(pdata->port_mode); - } else if (cpu_is_omap44xx()) { - ehci_resources[0].start = OMAP44XX_HSUSB_EHCI_BASE; - ehci_resources[0].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; - ehci_resources[1].start = OMAP44XX_UHH_CONFIG_BASE; - ehci_resources[1].end = OMAP44XX_UHH_CONFIG_BASE + SZ_2K - 1; - ehci_resources[2].start = OMAP44XX_USBTLL_BASE; - ehci_resources[2].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; - ehci_resources[3].start = OMAP44XX_IRQ_EHCI; - setup_4430ehci_io_mux(pdata->port_mode); - } - - if (platform_device_register(&ehci_device) < 0) { - printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); - return; - } -} - -#else - -void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata) - -{ -} - -#endif /* CONFIG_USB_EHCI_HCD */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - -static struct resource ohci_resources[] = { - { - .start = OMAP34XX_OHCI_BASE, - .end = OMAP34XX_OHCI_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP34XX_UHH_CONFIG_BASE, - .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP34XX_USBTLL_BASE, - .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - { /* general IRQ */ - .start = INT_34XX_OHCI_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 ohci_dmamask = DMA_BIT_MASK(32); - -static struct platform_device ohci_device = { - .name = "ohci-omap3", - .id = 0, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) +static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: @@ -430,7 +366,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm1_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -461,7 +397,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm2_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; @@ -492,31 +428,147 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) omap_mux_init_signal("mm3_txdat", OMAP_PIN_INPUT_PULLDOWN); break; - case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_USBHS_PORT_MODE_UNUSED: /* FALLTHROUGH */ default: break; } } -void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { - platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); + switch (port_mode[0]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("usbb1_mm_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_mm_rxdm", + OMAP_PIN_INPUT_PULLDOWN); - /* Setup Pin IO MUX for OHCI */ - if (cpu_is_omap34xx()) + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("usbb1_mm_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("usbb1_mm_txen", + OMAP_PIN_INPUT_PULLDOWN); + + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("usbb1_mm_txdat", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb1_mm_txse0", + OMAP_PIN_INPUT_PULLDOWN); + break; + + case OMAP_USBHS_PORT_MODE_UNUSED: + default: + break; + } + + switch (port_mode[1]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("usbb2_mm_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_mm_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("usbb2_mm_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("usbb2_mm_txen", + OMAP_PIN_INPUT_PULLDOWN); + + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("usbb2_mm_txdat", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("usbb2_mm_txse0", + OMAP_PIN_INPUT_PULLDOWN); + break; + + case OMAP_USBHS_PORT_MODE_UNUSED: + default: + break; + } +} + +void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +{ + int i; + + for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { + usbhs_data.port_mode[i] = pdata->port_mode[i]; + ohci_data.port_mode[i] = pdata->port_mode[i]; + ehci_data.port_mode[i] = pdata->port_mode[i]; + ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i]; + ehci_data.regulator[i] = pdata->regulator[i]; + } + ehci_data.phy_reset = pdata->phy_reset; + ohci_data.es2_compatibility = pdata->es2_compatibility; + usbhs_data.ehci_data = &ehci_data; + usbhs_data.ohci_data = &ohci_data; + + if (cpu_is_omap34xx()) { + usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE; + usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1; + usbhs_resources[1].start = OMAP34XX_USBTLL_BASE; + usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1; + usbhs_resources[2].start = OMAP34XX_EHCI_BASE; + usbhs_resources[2].end = OMAP34XX_EHCI_BASE + SZ_1K - 1; + usbhs_resources[3].start = INT_34XX_EHCI_IRQ; + usbhs_resources[4].start = OMAP34XX_OHCI_BASE; + usbhs_resources[4].end = OMAP34XX_OHCI_BASE + SZ_1K - 1; + usbhs_resources[5].start = INT_34XX_OHCI_IRQ; + setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); + } else if (cpu_is_omap44xx()) { + usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE; + usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1; + usbhs_resources[1].start = OMAP44XX_USBTLL_BASE; + usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1; + usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE; + usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1; + usbhs_resources[3].start = OMAP44XX_IRQ_EHCI; + usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE; + usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1; + usbhs_resources[5].start = OMAP44XX_IRQ_OHCI; + setup_4430ehci_io_mux(pdata->port_mode); + setup_4430ohci_io_mux(pdata->port_mode); + } - if (platform_device_register(&ohci_device) < 0) { - pr_err("Unable to register FS-USB (OHCI) device\n"); - return; + if (platform_device_add_data(&usbhs_device, + &usbhs_data, sizeof(usbhs_data)) < 0) { + printk(KERN_ERR "USBHS platform_device_add_data failed\n"); + goto init_end; } + + if (platform_device_register(&usbhs_device) < 0) + printk(KERN_ERR "USBHS platform_device_register failed\n"); + +init_end: + return; } #else -void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +void __init usbhs_init(const struct usbhs_omap_board_data *pdata) { } -#endif /* CONFIG_USB_OHCI_HCD */ +#endif + + diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index a9d4d14..35559f7 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -132,6 +132,9 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; + if (cpu_is_omap44xx()) + omap4430_phy_init(dev); + if (cpu_is_omap3517() || cpu_is_omap3505()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; |