diff options
Diffstat (limited to 'arch/arm/mach-omap2')
34 files changed, 213 insertions, 290 deletions
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a88809a..3669c12 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -607,29 +607,6 @@ static void __init omap_sfh7741prox_init(void) __func__, OMAP4_SFH7741_ENABLE_GPIO, error); } -static struct gpio sdp4430_hdmi_gpios[] = { - { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, - { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, - { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, -}; - -static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) -{ - int status; - - status = gpio_request_array(sdp4430_hdmi_gpios, - ARRAY_SIZE(sdp4430_hdmi_gpios)); - if (status) - pr_err("%s: Cannot request HDMI GPIOs\n", __func__); - - return status; -} - -static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) -{ - gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios)); -} - static struct nokia_dsi_panel_data dsi1_panel = { .name = "taal", .reset_gpio = 102, @@ -650,29 +627,6 @@ static struct omap_dss_device sdp4430_lcd_device = { .phy.dsi = { .module = 0, }, - - .clocks = { - .dispc = { - .channel = { - /* Logic Clock = 172.8 MHz */ - .lck_div = 1, - /* Pixel Clock = 34.56 MHz */ - .pck_div = 5, - .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC, - }, - .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK, - }, - - .dsi = { - .regn = 16, /* Fint = 2.4 MHz */ - .regm = 180, /* DDR Clock = 216 MHz */ - .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */ - .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */ - - .lp_clk_div = 10, /* LP Clock = 8.64 MHz */ - .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI, - }, - }, .channel = OMAP_DSS_CHANNEL_LCD, }; @@ -697,33 +651,12 @@ static struct omap_dss_device sdp4430_lcd2_device = { .module = 1, }, - - .clocks = { - .dispc = { - .channel = { - /* Logic Clock = 172.8 MHz */ - .lck_div = 1, - /* Pixel Clock = 34.56 MHz */ - .pck_div = 5, - .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC, - }, - .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK, - }, - - .dsi = { - .regn = 16, /* Fint = 2.4 MHz */ - .regm = 180, /* DDR Clock = 216 MHz */ - .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */ - .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */ - - .lp_clk_div = 10, /* LP Clock = 8.64 MHz */ - .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI, - }, - }, .channel = OMAP_DSS_CHANNEL_LCD2, }; static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, .hpd_gpio = HDMI_GPIO_HPD, }; @@ -731,8 +664,6 @@ static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", .type = OMAP_DISPLAY_TYPE_HDMI, - .platform_enable = sdp4430_panel_enable_hdmi, - .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, .data = &sdp4430_hdmi_data, }; @@ -830,6 +761,32 @@ static struct omap_board_mux board_mux[] __initdata = { /* NIRQ2 for twl6040 */ OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), + /* GPIO_127 for twl6040 */ + OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), + /* McPDM */ + OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + /* DMIC */ + OMAP4_MUX(ABE_DMIC_CLK1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP4_MUX(ABE_DMIC_DIN1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP4_MUX(ABE_DMIC_DIN2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP4_MUX(ABE_DMIC_DIN3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + /* McBSP1 */ + OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT | + OMAP_PULL_ENA), + OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + /* McBSP2 */ + OMAP4_MUX(ABE_MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP4_MUX(ABE_MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT | + OMAP_PULL_ENA), + OMAP4_MUX(ABE_MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 0d99c91..e162897 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -263,6 +263,16 @@ static __init void am3517_evm_musb_init(void) usb_musb_init(&musb_board_data); } +static __init void am3517_evm_mcbsp1_init(void) +{ + u32 devconf0; + + /* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */ + devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK; + omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); +} + static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ @@ -366,6 +376,9 @@ static void __init am3517_evm_init(void) /* MUSB */ am3517_evm_musb_init(); + /* McBSP1 */ + am3517_evm_mcbsp1_init(); + /* MMC init function */ omap_hsmmc_init(mmc); } diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 8ffd612..376d26e 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -723,6 +723,7 @@ static void __init cm_t3x_common_init(void) cm_t35_init_ethernet(); cm_t35_init_led(); cm_t35_init_display(); + omap_twl4030_audio_init("cm-t3x"); usb_musb_init(NULL); cm_t35_init_usbh(); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 7bb8056..1fd161e 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -623,6 +623,7 @@ static void __init devkit8000_init(void) usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, ARRAY_SIZE(devkit8000_nand_partitions)); + omap_twl4030_audio_init("omap3beagle"); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 0cabe61..e642acf 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -218,7 +218,7 @@ void __init board_flash_init(struct flash_partitions partition_info[], if (onenandcs > GPMC_CS_NUM) onenandcs = cs; break; - }; + } cs++; } diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index fb8bd83..48d5e41 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -625,6 +625,7 @@ static void __init igep_init(void) igep_flash_init(); igep_leds_init(); + omap_twl4030_audio_init("igep2"); /* * WLAN-BT combo module from MuRata which has a Marvell WLAN diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 68ff8d5..388c431 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -461,7 +461,7 @@ static void __init beagle_opp_init(void) mpu_dev = omap_device_get_by_hwmod_name("mpu"); iva_dev = omap_device_get_by_hwmod_name("iva"); - if (!mpu_dev || !iva_dev) { + if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); return; @@ -514,6 +514,7 @@ static void __init omap3_beagle_init(void) usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions)); + omap_twl4030_audio_init("omap3beagle"); /* Ensure msecure is mux'd to be able to set the RTC. */ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c64e565..b9b776b 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -88,11 +88,10 @@ enum { static u8 omap3_evm_version; -u8 get_omap3_evm_rev(void) +static u8 get_omap3_evm_rev(void) { return omap3_evm_version; } -EXPORT_SYMBOL(get_omap3_evm_rev); static void __init omap3_evm_get_revision(void) { @@ -739,6 +738,7 @@ static void __init omap3_evm_init(void) omap3evm_init_smsc911x(); omap3_evm_display_init(); omap3_evm_wl12xx_init(); + omap_twl4030_audio_init("omap3evm"); } MACHINE_START(OMAP3EVM, "OMAP3 EVM") diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index c7f3d02..731235e 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -48,11 +48,6 @@ #include <video/omap-panel-tfp410.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/interrupt.h> -#include <linux/smsc911x.h> -#include <linux/i2c/at24.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 2b012f9..bfcd397 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -247,8 +247,7 @@ static struct platform_device omap_vwlan_device = { }; static struct wl12xx_platform_data omap_panda_wlan_data __initdata = { - /* PANDA ref clock is 38.4 MHz */ - .board_ref_clock = 2, + .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */ }; static struct twl6040_codec_data twl6040_codec = { @@ -388,6 +387,21 @@ static struct omap_board_mux board_mux[] __initdata = { /* NIRQ2 for twl6040 */ OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), + /* GPIO_127 for twl6040 */ + OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), + /* McPDM */ + OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), + OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + /* McBSP1 */ + OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT | + OMAP_PULL_ENA), + OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; @@ -414,30 +428,9 @@ static struct omap_dss_device omap4_panda_dvi_device = { .channel = OMAP_DSS_CHANNEL_LCD2, }; -static struct gpio panda_hdmi_gpios[] = { - { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, - { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, - { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, -}; - -static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) -{ - int status; - - status = gpio_request_array(panda_hdmi_gpios, - ARRAY_SIZE(panda_hdmi_gpios)); - if (status) - pr_err("Cannot request HDMI GPIOs\n"); - - return status; -} - -static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) -{ - gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); -} - static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, .hpd_gpio = HDMI_GPIO_HPD, }; @@ -445,8 +438,6 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", .type = OMAP_DISPLAY_TYPE_HDMI, - .platform_enable = omap4_panda_panel_enable_hdmi, - .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, .data = &omap4_panda_hdmi_data, }; diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 2e7f240..b700685 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -504,6 +504,7 @@ static void __init overo_init(void) overo_display_init(); overo_init_led(); overo_init_keys(); + omap_twl4030_audio_init("overo"); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ed85fb8..020e03c 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -748,7 +748,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = .subdev_board_info = &rx51_si4713_board_info, }; -static struct platform_device rx51_si4713_dev = { +static struct platform_device rx51_si4713_dev __initdata_or_module = { .name = "radio-si4713", .id = -1, .dev = { diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6bcc107..c166fe1 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -35,6 +35,7 @@ #include "common-board-devices.h" #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) +#define ZOOM2_HEADSET_EXTMUTE_GPIO (153) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) #define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) @@ -194,8 +195,7 @@ static struct platform_device omap_vwlan_device = { }; static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { - /* ZOOM ref clock is 26 MHz */ - .board_ref_clock = 1, + .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */ }; static struct omap2_hsmmc_info mmc[] = { @@ -245,12 +245,6 @@ static int zoom_twl_gpio_setup(struct device *dev, return ret; } -/* EXTMUTE callback function */ -static void zoom2_set_hs_extmute(int mute) -{ - gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); -} - static struct twl4030_gpio_platform_data zoom_gpio_data = { .setup = zoom_twl_gpio_setup, }; @@ -277,7 +271,7 @@ static int __init omap_i2c_init(void) codec_data->ramp_delay_value = 3; /* 161 ms */ codec_data->hs_extmute = 1; - codec_data->set_hs_extmute = zoom2_set_hs_extmute; + codec_data->hs_extmute_gpio = ZOOM2_HEADSET_EXTMUTE_GPIO; } omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index eaed390..3ff2211 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -382,7 +382,7 @@ void omap2_init_clksel_parent(struct clk *clk) __clk_get_name(parent) : "NULL")); clk_reparent(clk, clks->parent); - }; + } found = 1; } } diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index b87b88c..114ab4b 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1035,6 +1035,8 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX), CLK("davinci-mcasp.0", NULL, &mcasp0_fck, CK_AM33XX), CLK("davinci-mcasp.1", NULL, &mcasp1_fck, CK_AM33XX), + CLK(NULL, "mcasp0_fck", &mcasp0_fck, CK_AM33XX), + CLK(NULL, "mcasp1_fck", &mcasp1_fck, CK_AM33XX), CLK("NULL", "mmc2_fck", &mmc2_fck, CK_AM33XX), CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index 9a7792a..70294f5 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -183,17 +183,6 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && - !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { - _enable_hwsup(clkdm); - return 0; - } - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -217,17 +206,6 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && - (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { - omap3_clkdm_wakeup(clkdm); - return 0; - } - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -269,6 +247,17 @@ static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && + (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { + omap3_clkdm_wakeup(clkdm); + return 0; + } + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -292,6 +281,17 @@ static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && + !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + _enable_hwsup(clkdm); + return 0; + } + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 7012068..1011995 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -95,7 +95,6 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = { { "dss_core", "omapdss_dss", -1 }, { "dss_dispc", "omapdss_dispc", -1 }, { "dss_rfbi", "omapdss_rfbi", -1 }, - { "dss_venc", "omapdss_venc", -1 }, { "dss_dsi1", "omapdss_dsi", 0 }, { "dss_dsi2", "omapdss_dsi", 1 }, { "dss_hdmi", "omapdss_hdmi", -1 }, @@ -221,7 +220,7 @@ static struct platform_device *create_dss_pdev(const char *pdev_name, ohs[0] = oh; od = omap_device_alloc(pdev, ohs, 1, NULL, 0); - if (!od) { + if (IS_ERR(od)) { pr_err("Could not alloc omap_device for %s\n", pdev_name); r = -ENOMEM; goto err; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8ab1e1b..5ac5cf3 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -838,7 +838,7 @@ static int gpmc_setup_irq(void) return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL); } -static __exit int gpmc_free_irq(void) +static __devexit int gpmc_free_irq(void) { int i; @@ -944,7 +944,7 @@ static __devinit int gpmc_probe(struct platform_device *pdev) return 0; } -static __exit int gpmc_remove(struct platform_device *pdev) +static __devexit int gpmc_remove(struct platform_device *pdev) { gpmc_free_irq(); gpmc_mem_exit(); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 03ebf47..4d3a632 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -523,7 +523,7 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); od = omap_device_alloc(pdev, ohs, 1, NULL, 0); - if (!od) { + if (IS_ERR(od)) { pr_err("Could not allocate od for %s\n", name); goto put_pdev; } diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h index 775fdc3..2e94869 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h @@ -8,5 +8,3 @@ extern int __init zoom_debugboard_init(void); extern void __init zoom_peripherals_init(void); extern void __init zoom_display_init(void); - -#define ZOOM2_HEADSET_EXTMUTE_GPIO 153 diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 7d47407..37f8f94 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -15,6 +15,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/platform_data/asoc-ti-mcbsp.h> @@ -23,8 +24,6 @@ #include <plat/omap_device.h> #include <linux/pm_runtime.h> -#include "control.h" - /* * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. * Sidetone needs non-gated ICLK and sidetone autoidle is broken. @@ -32,112 +31,6 @@ #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" -/* McBSP1 internal signal muxing function for OMAP2/3 */ -static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, - const char *src) -{ - u32 v; - - v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - - if (!strcmp(signal, "clkr")) { - if (!strcmp(src, "clkr")) - v &= ~OMAP2_MCBSP1_CLKR_MASK; - else if (!strcmp(src, "clkx")) - v |= OMAP2_MCBSP1_CLKR_MASK; - else - return -EINVAL; - } else if (!strcmp(signal, "fsr")) { - if (!strcmp(src, "fsr")) - v &= ~OMAP2_MCBSP1_FSR_MASK; - else if (!strcmp(src, "fsx")) - v |= OMAP2_MCBSP1_FSR_MASK; - else - return -EINVAL; - } else { - return -EINVAL; - } - - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - - return 0; -} - -/* McBSP4 internal signal muxing function for OMAP4 */ -#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX (1 << 31) -#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX (1 << 30) -static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal, - const char *src) -{ - u32 v; - - /* - * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR - * mux) is used */ - v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); - - if (!strcmp(signal, "clkr")) { - if (!strcmp(src, "clkr")) - v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; - else if (!strcmp(src, "clkx")) - v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; - else - return -EINVAL; - } else if (!strcmp(signal, "fsr")) { - if (!strcmp(src, "fsr")) - v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; - else if (!strcmp(src, "fsx")) - v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; - else - return -EINVAL; - } else { - return -EINVAL; - } - - omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); - - return 0; -} - -/* McBSP CLKS source switching function */ -static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk, - const char *src) -{ - struct clk *fck_src; - char *fck_src_name; - int r; - - if (!strcmp(src, "clks_ext")) - fck_src_name = "pad_fck"; - else if (!strcmp(src, "clks_fclk")) - fck_src_name = "prcm_fck"; - else - return -EINVAL; - - fck_src = clk_get(dev, fck_src_name); - if (IS_ERR_OR_NULL(fck_src)) { - pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks", - fck_src_name); - return -EINVAL; - } - - pm_runtime_put_sync(dev); - - r = clk_set_parent(clk, fck_src); - if (IS_ERR_VALUE(r)) { - pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n", - "clks", fck_src_name); - clk_put(fck_src); - return -EINVAL; - } - - pm_runtime_get_sync(dev); - - clk_put(fck_src); - - return 0; -} - static int omap3_enable_st_clock(unsigned int id, bool enable) { unsigned int w; @@ -179,17 +72,11 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->reg_size = 4; pdata->has_ccr = true; } - pdata->set_clk_src = omap2_mcbsp_set_clk_src; - - /* On OMAP2/3 the McBSP1 port has 6 pin configuration */ - if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4) - pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; - /* On OMAP4 the McBSP4 port has 6 pin configuration */ - if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4) - pdata->mux_signal = omap4_mcbsp4_mux_rx_clk; - - if (oh->class->rev == MCBSP_CONFIG_TYPE3) { + if (oh->class->rev == MCBSP_CONFIG_TYPE2) { + /* The FIFO has 128 locations */ + pdata->buffer_size = 0x80; + } else if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) /* The FIFO has 1024 + 256 locations */ pdata->buffer_size = 0x500; @@ -225,7 +112,8 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) static int __init omap2_mcbsp_init(void) { - omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL); + if (!of_have_populated_dt()) + omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL); return 0; } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 9fe6829..701e17c 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -486,7 +486,7 @@ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state) default: /* Nothing to be done */ break; - }; + } if (val >= 0) { omap_mux_write(pad->partition, val, diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index a004cb9..e089e4d 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -61,8 +61,8 @@ int __init omap_secure_ram_reserve_memblock(void) { u32 size = OMAP_SECURE_RAM_STORAGE; - size = ALIGN(size, SZ_1M); - omap_secure_memblock_base = arm_memblock_steal(size, SZ_1M); + size = ALIGN(size, SECTION_SIZE); + omap_secure_memblock_base = arm_memblock_steal(size, SECTION_SIZE); return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 299ca28..b969ab1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1698,6 +1698,29 @@ static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh) } /** + * _are_any_hardreset_lines_asserted - return true if any part of @oh is + * hard-reset + * @oh: struct omap_hwmod * + * + * If any hardreset lines associated with @oh are asserted, then + * return true. Otherwise, if no hardreset lines associated with @oh + * are asserted, or if @oh has no hardreset lines, then return false. + * This function is used to avoid executing some parts of the IP block + * enable/disable sequence if any hardreset line is set. + */ +static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh) +{ + int rst_cnt = 0; + int i; + + for (i = 0; i < oh->rst_lines_cnt && rst_cnt == 0; i++) + if (_read_hardreset(oh, oh->rst_lines[i].name) > 0) + rst_cnt++; + + return (rst_cnt) ? true : false; +} + +/** * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * * @@ -1715,7 +1738,7 @@ static int _omap4_disable_module(struct omap_hwmod *oh) * Since integration code might still be doing something, only * disable if all lines are under hardreset. */ - if (!_are_all_hardreset_lines_asserted(oh)) + if (_are_any_hardreset_lines_asserted(oh)) return 0; pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); @@ -1749,12 +1772,12 @@ static int _am33xx_disable_module(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); + if (_are_any_hardreset_lines_asserted(oh)) + return 0; + am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs, oh->prcm.omap4.clkctrl_offs); - if (_are_all_hardreset_lines_asserted(oh)) - return 0; - v = _am33xx_wait_target_disable(oh); if (v) pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 35dcdb6..bd9220e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -219,7 +219,7 @@ struct omap_hwmod omap2xxx_l4_wkup_hwmod = { /* MPU */ static struct omap_hwmod_irq_info omap2xxx_mpu_irqs[] = { - { .name = "pmu", .irq = 3 }, + { .name = "pmu", .irq = 3 + OMAP_INTC_START }, { .irq = -1 } }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 2857772..f67b7ee 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -94,7 +94,7 @@ static struct omap_hwmod omap3xxx_l4_sec_hwmod = { /* MPU */ static struct omap_hwmod_irq_info omap3xxx_mpu_irqs[] = { - { .name = "pmu", .irq = 3 }, + { .name = "pmu", .irq = 3 + OMAP_INTC_START }, { .irq = -1 } }; @@ -3683,6 +3683,7 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__usb_tll_hs, &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, + &omap3xxx_l4_core__hdq1w, &am35xx_mdio__l3, &am35xx_l4_core__mdio, &am35xx_emac__l3, @@ -3737,7 +3738,7 @@ int __init omap3xxx_hwmod_init(void) } else { WARN(1, "OMAP3 hwmod family init: unknown chip type\n"); return -EINVAL; - }; + } r = omap_hwmod_register_links(h); if (r < 0) @@ -3754,7 +3755,7 @@ int __init omap3xxx_hwmod_init(void) rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap3430es2plus_hwmod_ocp_ifs; - }; + } if (h) { r = omap_hwmod_register_links(h); @@ -3769,7 +3770,7 @@ int __init omap3xxx_hwmod_init(void) } else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap3430_es3plus_hwmod_ocp_ifs; - }; + } if (h) r = omap_hwmod_register_links(h); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 8d7a935..652d028 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -5269,6 +5269,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = { static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = { { + .name = "mpu", .pa_start = 0x40132000, .pa_end = 0x4013207f, .flags = ADDR_TYPE_RT @@ -5287,6 +5288,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = { { + .name = "dma", .pa_start = 0x49032000, .pa_end = 0x4903207f, .flags = ADDR_TYPE_RT diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 45ad7f7..58e16ae 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -18,6 +18,7 @@ */ #include <linux/module.h> #include <linux/opp.h> +#include <linux/cpu.h> #include <plat/omap_device.h> @@ -62,13 +63,23 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, __func__, i); return -EINVAL; } - oh = omap_hwmod_lookup(opp_def->hwmod_name); - if (!oh || !oh->od) { - pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n", - __func__, opp_def->hwmod_name, i); - continue; + + if (!strncmp(opp_def->hwmod_name, "mpu", 3)) { + /* + * All current OMAPs share voltage rail and + * clock source, so CPU0 is used to represent + * the MPU-SS. + */ + dev = get_cpu_device(0); + } else { + oh = omap_hwmod_lookup(opp_def->hwmod_name); + if (!oh || !oh->od) { + pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n", + __func__, opp_def->hwmod_name, i); + continue; + } + dev = &oh->od->pdev->dev; } - dev = &oh->od->pdev->dev; r = opp_add(dev, opp_def->freq, opp_def->u_volt); if (r) { diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 3e1345f..46092cd 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -168,7 +168,7 @@ static int pm_dbg_open(struct inode *inode, struct file *file) default: return single_open(file, pm_dbg_show_timers, &inode->i_private); - }; + } } static const struct file_operations debug_fops = { diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index abefbc4..ea61c32 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -16,6 +16,7 @@ #include <linux/opp.h> #include <linux/export.h> #include <linux/suspend.h> +#include <linux/cpu.h> #include <asm/system_misc.h> @@ -169,7 +170,15 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, goto exit; } - dev = omap_device_get_by_hwmod_name(oh_name); + if (!strncmp(oh_name, "mpu", 3)) + /* + * All current OMAPs share voltage rail and clock + * source, so CPU0 is used to represent the MPU-SS. + */ + dev = get_cpu_device(0); + else + dev = omap_device_get_by_hwmod_name(oh_name); + if (IS_ERR(dev)) { pr_err("%s: Unable to get dev pointer for hwmod %s\n", __func__, oh_name); @@ -177,7 +186,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, } voltdm = voltdm_lookup(vdd_name); - if (IS_ERR(voltdm)) { + if (!voltdm) { pr_err("%s: unable to get vdd pointer for vdd_%s\n", __func__, vdd_name); goto exit; diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index cbeae56..f8217a5 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -122,7 +122,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->senp_mod = 0x1; sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); - if (IS_ERR(sr_data->voltdm)) { + if (!sr_data->voltdm) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", __func__, sr_dev_attr->sensor_voltdm_name); goto exit; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 8847d6e..44f9aa7 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -378,7 +378,7 @@ static void __init realtime_counter_init(void) return; } sys_clk = clk_get(NULL, "sys_clkin_ck"); - if (!sys_clk) { + if (IS_ERR(sys_clk)) { pr_err("%s: failed to get system clock handle\n", __func__); iounmap(base); return; diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 45f7741..635e109 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -158,7 +158,7 @@ static struct regulator_init_data omap3_vpll2_idata = { }; static struct regulator_consumer_supply omap3_vdd1_supply[] = { - REGULATOR_SUPPLY("vcc", "mpu.0"), + REGULATOR_SUPPLY("vcc", "cpu0"), }; static struct regulator_consumer_supply omap3_vdd2_supply[] = { @@ -239,6 +239,10 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, static struct twl4030_usb_data omap4_usb_pdata = { }; +static struct regulator_consumer_supply omap4_vdda_hdmi_dac_supplies[] = { + REGULATOR_SUPPLY("vdda_hdmi_dac", "omapdss_hdmi"), +}; + static struct regulator_init_data omap4_vdac_idata = { .constraints = { .min_uV = 1800000, @@ -248,6 +252,8 @@ static struct regulator_init_data omap4_vdac_idata = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vdda_hdmi_dac_supplies), + .consumer_supplies = omap4_vdda_hdmi_dac_supplies, .supply_regulator = "V2V1", }; @@ -519,3 +525,30 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, pmic_data->v2v1 = &omap4_v2v1_idata; } #endif /* CONFIG_ARCH_OMAP4 */ + +#if defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) || \ + defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE) +#include <linux/platform_data/omap-twl4030.h> + +static struct omap_tw4030_pdata omap_twl4030_audio_data; + +static struct platform_device audio_device = { + .name = "omap-twl4030", + .id = -1, + .dev = { + .platform_data = &omap_twl4030_audio_data, + }, +}; + +void __init omap_twl4030_audio_init(char *card_name) +{ + omap_twl4030_audio_data.card_name = card_name; + platform_device_register(&audio_device); +} + +#else /* SOC_OMAP_TWL4030 */ +void __init omap_twl4030_audio_init(char *card_name) +{ + return; +} +#endif /* SOC_OMAP_TWL4030 */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 2256efe..dcfbad5 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -60,4 +60,6 @@ void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); +void omap_twl4030_audio_init(char *card_name); + #endif /* __OMAP_PMIC_COMMON__ */ |