diff options
Diffstat (limited to 'arch/arm/mach-pxa/e800_lcd.c')
| -rw-r--r-- | arch/arm/mach-pxa/e800_lcd.c | 159 |
1 files changed, 0 insertions, 159 deletions
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800_lcd.c deleted file mode 100644 index e6aeab0..0000000 --- a/arch/arm/mach-pxa/e800_lcd.c +++ /dev/null @@ -1,159 +0,0 @@ -/* e800_lcd.c - * - * This file contains the definitions for the LCD timings and functions - * to control the LCD power / frontlighting via the w100fb driver. - * - * (c) 2005 Ian Molton <spyro@f2s.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/device.h> -#include <linux/fb.h> -#include <linux/err.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> - -#include <video/w100fb.h> - -static struct w100_gen_regs e800_lcd_regs = { - .lcd_format = 0x00008003, - .lcdd_cntl1 = 0x02a00000, - .lcdd_cntl2 = 0x0003ffff, - .genlcd_cntl1 = 0x000ff2a3, - .genlcd_cntl2 = 0x000002a3, - .genlcd_cntl3 = 0x000102aa, -}; - -static struct w100_mode e800_lcd_mode[2] = { - [0] = { - .xres = 480, - .yres = 640, - .left_margin = 52, - .right_margin = 148, - .upper_margin = 2, - .lower_margin = 6, - .crtc_ss = 0x80350034, - .crtc_ls = 0x802b0026, - .crtc_gs = 0x80160016, - .crtc_vpos_gs = 0x00020003, - .crtc_rev = 0x0040001d, - .crtc_dclk = 0xe0000000, - .crtc_gclk = 0x82a50049, - .crtc_goe = 0x80ee001c, - .crtc_ps1_active = 0x00000000, - .pll_freq = 128, - .pixclk_divider = 4, - .pixclk_divider_rotated = 6, - .pixclk_src = CLK_SRC_PLL, - .sysclk_divider = 0, - .sysclk_src = CLK_SRC_PLL, - }, - [1] = { - .xres = 240, - .yres = 320, - .left_margin = 15, - .right_margin = 88, - .upper_margin = 0, - .lower_margin = 7, - .crtc_ss = 0xd010000f, - .crtc_ls = 0x80070003, - .crtc_gs = 0x80000000, - .crtc_vpos_gs = 0x01460147, - .crtc_rev = 0x00400003, - .crtc_dclk = 0xa1700030, - .crtc_gclk = 0x814b0008, - .crtc_goe = 0x80cc0015, - .crtc_ps1_active = 0x00000000, - .pll_freq = 100, - .pixclk_divider = 6, /* Wince uses 14 which gives a 7MHz pclk. */ - .pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */ - .pixclk_src = CLK_SRC_PLL, - .sysclk_divider = 0, - .sysclk_src = CLK_SRC_PLL, - } -}; - - -static struct w100_gpio_regs e800_w100_gpio_info = { - .init_data1 = 0xc13fc019, - .gpio_dir1 = 0x3e40df7f, - .gpio_oe1 = 0x003c3000, - .init_data2 = 0x00000000, - .gpio_dir2 = 0x00000000, - .gpio_oe2 = 0x00000000, -}; - -static struct w100_mem_info e800_w100_mem_info = { - .ext_cntl = 0x09640011, - .sdram_mode_reg = 0x00600021, - .ext_timing_cntl = 0x10001545, - .io_cntl = 0x7ddd7333, - .size = 0x1fffff, -}; - -static void e800_tg_change(struct w100fb_par *par) -{ - unsigned long tmp; - - tmp = w100fb_gpio_read(W100_GPIO_PORT_A); - if (par->mode->xres == 480) - tmp |= 0x100; - else - tmp &= ~0x100; - w100fb_gpio_write(W100_GPIO_PORT_A, tmp); -} - -static struct w100_tg_info e800_tg_info = { - .change = e800_tg_change, -}; - -static struct w100fb_mach_info e800_fb_info = { - .modelist = e800_lcd_mode, - .num_modes = 2, - .regs = &e800_lcd_regs, - .gpio = &e800_w100_gpio_info, - .mem = &e800_w100_mem_info, - .tg = &e800_tg_info, - .xtal_freq = 16000000, -}; - -static struct resource e800_fb_resources[] = { - [0] = { - .start = 0x0c000000, - .end = 0x0cffffff, - .flags = IORESOURCE_MEM, - }, -}; - -/* ----------------------- device declarations -------------------------- */ - - -static struct platform_device e800_fb_device = { - .name = "w100fb", - .id = -1, - .dev = { - .platform_data = &e800_fb_info, - }, - .num_resources = ARRAY_SIZE(e800_fb_resources), - .resource = e800_fb_resources, -}; - -static int e800_lcd_init(void) -{ - if (!machine_is_e800()) - return -ENODEV; - - return platform_device_register(&e800_fb_device); -} - -module_init(e800_lcd_init); - -MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); -MODULE_DESCRIPTION("e800 lcd driver"); -MODULE_LICENSE("GPLv2"); |