diff options
Diffstat (limited to 'arch/arm64/boot')
30 files changed, 1970 insertions, 175 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index f832b8a..fd80617 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,3 +1,4 @@ +dts-dirs += al dts-dirs += altera dts-dirs += amd dts-dirs += apm diff --git a/arch/arm64/boot/dts/al/Makefile b/arch/arm64/boot/dts/al/Makefile new file mode 100644 index 0000000..8a6cde4 --- /dev/null +++ b/arch/arm64/boot/dts/al/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_ALPINE) += alpine-v2-evp.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/al/alpine-v2-evp.dts b/arch/arm64/boot/dts/al/alpine-v2-evp.dts new file mode 100644 index 0000000..a079d7b --- /dev/null +++ b/arch/arm64/boot/dts/al/alpine-v2-evp.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Antoine Tenart <antoine.tenart@free-electrons.com> + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "alpine-v2.dtsi" + +/ { + model = "Annapurna Labs Alpine v2 EVP"; + compatible = "al,alpine-v2-evp", "al,alpine-v2"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/al/alpine-v2.dtsi b/arch/arm64/boot/dts/al/alpine-v2.dtsi new file mode 100644 index 0000000..5b7bef6 --- /dev/null +++ b/arch/arm64/boot/dts/al/alpine-v2.dtsi @@ -0,0 +1,236 @@ +/* + * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Antoine Tenart <antoine.tenart@free-electrons.com> + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Annapurna Labs Alpine v2"; + compatible = "al,alpine-v2"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + sbclk: sbclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + ranges; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + }; + + gic: gic@f0100000 { + compatible = "arm,gic-v3"; + reg = <0x0 0xf0200000 0x0 0x10000>, /* GIC Dist */ + <0x0 0xf0280000 0x0 0x200000>, /* GICR */ + <0x0 0xf0100000 0x0 0x2000>, /* GICC */ + <0x0 0xf0110000 0x0 0x2000>, /* GICV */ + <0x0 0xf0120000 0x0 0x2000>; /* GICH */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + pci@fbc00000 { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + #interrupt-cells = <1>; + reg = <0x0 0xfbc00000 0x0 0x100000>; + interrupt-map-mask = <0xf800 0 0 7>; + /* add legacy interrupts for SATA only */ + interrupt-map = <0x4000 0 0 1 &gic 0 53 4>, + <0x4800 0 0 1 &gic 0 54 4>; + /* 32 bit non prefetchable memory space */ + ranges = <0x2000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; + bus-range = <0x00 0x00>; + msi-parent = <&msix>; + }; + + msix: msix@fbe00000 { + compatible = "al,alpine-msix"; + reg = <0x0 0xfbe00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + al,msi-base-spi = <160>; + al,msi-num-spis = <160>; + }; + + io-fabric { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xfc000000 0x2000000>; + + uart0: serial@1883000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1883000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@1884000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1884000 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@1885000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1885000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@1886000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1886000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + timer0: timer@1890000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1890000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sbclk>; + }; + + timer1: timer@1891000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1891000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sbclk>; + status = "disabled"; + }; + + timer2: timer@1892000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1892000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sbclk>; + status = "disabled"; + }; + + timer3: timer@1893000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1893000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sbclk>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile index cfdf701..ba84770 100644 --- a/arch/arm64/boot/dts/amd/Makefile +++ b/arch/arm64/boot/dts/amd/Makefile @@ -1,4 +1,6 @@ -dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb +dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \ + amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \ + husky.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts new file mode 100644 index 0000000..8e3074a --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts @@ -0,0 +1,87 @@ +/* + * DTS file for AMD Seattle Overdrive Development Board + * Note: For Seattle Rev.B0 + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +/include/ "amd-seattle-soc.dtsi" + +/ { + model = "AMD Seattle (Rev.B0) Development Board (Overdrive)"; + compatible = "amd,seattle-overdrive", "amd,seattle"; + + chosen { + stdout-path = &serial0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; +}; + +&ccp0 { + status = "ok"; + amd,zlib-support = <1>; +}; + +/** + * NOTE: In Rev.B, gpio0 is reserved. + */ +&gpio1 { + status = "ok"; +}; + +&gpio2 { + status = "ok"; +}; + +&gpio3 { + status = "ok"; +}; + +&gpio4 { + status = "ok"; +}; + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&spi0 { + status = "ok"; +}; + +&spi1 { + status = "ok"; + sdcard0: sdcard@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3200 3400>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,com-mode = <0x0>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + }; +}; + +&ipmi_kcs { + status = "ok"; +}; + +&smb0 { + /include/ "amd-seattle-xgbe-b.dtsi" +}; diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts new file mode 100644 index 0000000..ed5e043 --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts @@ -0,0 +1,91 @@ +/* + * DTS file for AMD Seattle Overdrive Development Board + * Note: For Seattle Rev.B1 + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +/include/ "amd-seattle-soc.dtsi" + +/ { + model = "AMD Seattle (Rev.B1) Development Board (Overdrive)"; + compatible = "amd,seattle-overdrive", "amd,seattle"; + + chosen { + stdout-path = &serial0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; +}; + +&ccp0 { + status = "ok"; + amd,zlib-support = <1>; +}; + +/** + * NOTE: In Rev.B, gpio0 is reserved. + */ +&gpio1 { + status = "ok"; +}; + +&gpio2 { + status = "ok"; +}; + +&gpio3 { + status = "ok"; +}; + +&gpio4 { + status = "ok"; +}; + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&sata1 { + status = "ok"; +}; + +&spi0 { + status = "ok"; +}; + +&spi1 { + status = "ok"; + sdcard0: sdcard@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3200 3400>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,com-mode = <0x0>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + }; +}; + +&ipmi_kcs { + status = "ok"; +}; + +&smb0 { + /include/ "amd-seattle-xgbe-b.dtsi" +}; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi index 2874d92..bd3adea 100644 --- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi +++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi @@ -18,8 +18,8 @@ #size-cells = <2>; reg = <0x0 0xe1110000 0 0x1000>, <0x0 0xe112f000 0 0x2000>, - <0x0 0xe1140000 0 0x10000>, - <0x0 0xe1160000 0 0x10000>; + <0x0 0xe1140000 0 0x2000>, + <0x0 0xe1160000 0 0x2000>; interrupts = <1 9 0xf04>; ranges = <0 0 0 0xe1100000 0 0x100000>; v2m0: v2m@e0080000 { @@ -55,25 +55,47 @@ #size-cells = <2>; ranges; - /* DDR range is 40-bit addressing */ - dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>; + /* + * dma-ranges is 40-bit address space containing: + * - GICv2m MSI register is at 0xe0080000 + * - DRAM range [0x8000000000 to 0xffffffffff] + */ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; /include/ "amd-seattle-clks.dtsi" sata0: sata@e0300000 { compatible = "snps,dwc-ahci"; - reg = <0 0xe0300000 0 0x800>; + reg = <0 0xe0300000 0 0xf0000>; interrupts = <0 355 4>; clocks = <&sataclk_333mhz>; dma-coherent; }; + /* This is for Rev B only */ + sata1: sata@e0d00000 { + status = "disabled"; + compatible = "snps,dwc-ahci"; + reg = <0 0xe0d00000 0 0xf0000>; + interrupts = <0 354 4>; + clocks = <&sataclk_333mhz>; + dma-coherent; + }; + i2c0: i2c@e1000000 { status = "disabled"; compatible = "snps,designware-i2c"; reg = <0 0xe1000000 0 0x1000>; interrupts = <0 357 4>; - clocks = <&uartspiclk_100mhz>; + clocks = <&miscclk_250mhz>; + }; + + i2c1: i2c@e0050000 { + status = "disabled"; + compatible = "snps,designware-i2c"; + reg = <0 0xe0050000 0 0x1000>; + interrupts = <0 340 4>; + clocks = <&miscclk_250mhz>; }; serial0: serial@e1010000 { @@ -87,7 +109,6 @@ spi0: ssp@e1020000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; - #gpio-cells = <2>; reg = <0 0xe1020000 0 0x1000>; spi-controller; interrupts = <0 330 4>; @@ -98,7 +119,6 @@ spi1: ssp@e1030000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; - #gpio-cells = <2>; reg = <0 0xe1030000 0 0x1000>; spi-controller; interrupts = <0 329 4>; @@ -109,7 +129,7 @@ #size-cells = <0>; }; - gpio0: gpio@e1040000 { + gpio0: gpio@e1040000 { /* Not available to OS for B0 */ status = "disabled"; compatible = "arm,pl061", "arm,primecell"; #gpio-cells = <2>; @@ -118,18 +138,59 @@ interrupts = <0 359 4>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&uartspiclk_100mhz>; + clocks = <&miscclk_250mhz>; clock-names = "apb_pclk"; }; - gpio1: gpio@e1050000 { + gpio1: gpio@e1050000 { /* [0:7] */ status = "disabled"; compatible = "arm,pl061", "arm,primecell"; #gpio-cells = <2>; reg = <0 0xe1050000 0 0x1000>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <0 358 4>; - clocks = <&uartspiclk_100mhz>; + clocks = <&miscclk_250mhz>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@e0020000 { /* [8:15] */ + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe0020000 0 0x1000>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 366 4>; + clocks = <&miscclk_250mhz>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@e0030000 { /* [16:23] */ + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe0030000 0 0x1000>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 365 4>; + clocks = <&miscclk_250mhz>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@e0080000 { /* [24] */ + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe0080000 0 0x1000>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 361 4>; + clocks = <&miscclk_250mhz>; clock-names = "apb_pclk"; }; @@ -159,7 +220,7 @@ <0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>; dma-coherent; - dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>; + dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>; ranges = /* I/O Memory (size=64K) */ <0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>, @@ -168,5 +229,22 @@ /* 64-bit MMIO (size= 124G) */ <0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>; }; + + /* Perf CCN504 PMU */ + ccn: ccn@e8000000 { + compatible = "arm,ccn-504"; + reg = <0x0 0xe8000000 0 0x1000000>; + interrupts = <0 380 4>; + }; + + ipmi_kcs: kcs@e0010000 { + status = "disabled"; + compatible = "ipmi-kcs"; + device_type = "ipmi"; + reg = <0x0 0xe0010000 0 0x8>; + interrupts = <0 389 4>; + reg-size = <1>; + reg-spacing = <4>; + }; }; }; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi new file mode 100644 index 0000000..8e86319 --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi @@ -0,0 +1,117 @@ +/* + * DTS file for AMD Seattle XGBE (RevB) + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + */ + + xgmacclk0_dma_250mhz: clk250mhz_0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk0_dma_250mhz"; + }; + + xgmacclk0_ptp_250mhz: clk250mhz_1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk0_ptp_250mhz"; + }; + + xgmacclk1_dma_250mhz: clk250mhz_2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk1_dma_250mhz"; + }; + + xgmacclk1_ptp_250mhz: clk250mhz_3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk1_ptp_250mhz"; + }; + + xgmac0: xgmac@e0700000 { + compatible = "amd,xgbe-seattle-v1a"; + reg = <0 0xe0700000 0 0x80000>, + <0 0xe0780000 0 0x80000>, + <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */ + <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */ + <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */ + interrupts = <0 325 4>, + <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>, + <0 323 4>; + amd,per-channel-interrupt; + amd,speed-set = <0>; + amd,serdes-blwc = <1>, <1>, <0>; + amd,serdes-cdr-rate = <2>, <2>, <7>; + amd,serdes-pq-skew = <10>, <10>, <18>; + amd,serdes-tx-amp = <0>, <0>, <0>; + amd,serdes-dfe-tap-config = <3>, <3>, <3>; + amd,serdes-dfe-tap-enable = <0>, <0>, <7>; + mac-address = [ 02 A1 A2 A3 A4 A5 ]; + clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>; + clock-names = "dma_clk", "ptp_clk"; + phy-mode = "xgmii"; + #stream-id-cells = <16>; + dma-coherent; + }; + + xgmac1: xgmac@e0900000 { + compatible = "amd,xgbe-seattle-v1a"; + reg = <0 0xe0900000 0 0x80000>, + <0 0xe0980000 0 0x80000>, + <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */ + <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */ + <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */ + interrupts = <0 324 4>, + <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>, + <0 322 4>; + amd,per-channel-interrupt; + amd,speed-set = <0>; + amd,serdes-blwc = <1>, <1>, <0>; + amd,serdes-cdr-rate = <2>, <2>, <7>; + amd,serdes-pq-skew = <10>, <10>, <18>; + amd,serdes-tx-amp = <0>, <0>, <0>; + amd,serdes-dfe-tap-config = <3>, <3>, <3>; + amd,serdes-dfe-tap-enable = <0>, <0>, <7>; + mac-address = [ 02 B1 B2 B3 B4 B5 ]; + clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>; + clock-names = "dma_clk", "ptp_clk"; + phy-mode = "xgmii"; + #stream-id-cells = <16>; + dma-coherent; + }; + + xgmac0_smmu: smmu@e0600000 { + compatible = "arm,mmu-401"; + reg = <0 0xe0600000 0 0x10000>; + #global-interrupts = <1>; + interrupts = /* Uses combined intr for both + * global and context + */ + <0 336 4>, + <0 336 4>; + + mmu-masters = <&xgmac0 + 0 1 2 3 4 5 6 7 + 16 17 18 19 20 21 22 23 + >; + }; + + xgmac1_smmu: smmu@e0800000 { + compatible = "arm,mmu-401"; + reg = <0 0xe0800000 0 0x10000>; + #global-interrupts = <1>; + interrupts = /* Uses combined intr for both + * global and context + */ + <0 335 4>, + <0 335 4>; + + mmu-masters = <&xgmac1 + 0 1 2 3 4 5 6 7 + 16 17 18 19 20 21 22 23 + >; + }; diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts new file mode 100644 index 0000000..1381d4b --- /dev/null +++ b/arch/arm64/boot/dts/amd/husky.dts @@ -0,0 +1,83 @@ +/* + * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board + * Note: Based-on AMD Seattle Rev.B0 + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +/include/ "amd-seattle-soc.dtsi" + +/ { + model = "Linaro 96Boards Enterprise Edition Server (Husky) Board"; + compatible = "amd,seattle-overdrive", "amd,seattle"; + + chosen { + stdout-path = &serial0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; +}; + +&ccp0 { + status = "ok"; + amd,zlib-support = <1>; +}; + +/** + * NOTE: In Rev.B, gpio0 is reserved. + */ +&gpio1 { + status = "ok"; +}; + +&gpio2 { + status = "ok"; +}; + +&gpio3 { + status = "ok"; +}; + +&gpio4 { + status = "ok"; +}; + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&spi0 { + status = "ok"; +}; + +&spi1 { + status = "ok"; + sdcard0: sdcard@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3200 3400>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,com-mode = <0x0>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + }; +}; + +&smb0 { + /include/ "amd-seattle-xgbe-b.dtsi" +}; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index dd5158e..e5b59ca 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -115,6 +115,7 @@ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts index 6bb3d4d..ce0ab84 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -52,6 +52,14 @@ }; }; +&pcie0 { + status = "ok"; +}; + +&pcie4 { + status = "ok"; +}; + &i2c0 { status = "ok"; }; @@ -64,6 +72,10 @@ status = "ok"; }; +&sdio0 { + status = "ok"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index a510d3a..6f81c9d 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -137,6 +137,80 @@ }; }; + pcie0: pcie@20020000 { + compatible = "brcm,iproc-pcie"; + reg = <0 0x20020000 0 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>; + + brcm,pcie-ob; + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x00000000>; + brcm,pcie-ob-window-size = <256>; + + status = "disabled"; + + msi-parent = <&msi0>; + msi0: msi@20020000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>, + <GIC_SPI 278 IRQ_TYPE_NONE>, + <GIC_SPI 279 IRQ_TYPE_NONE>, + <GIC_SPI 280 IRQ_TYPE_NONE>; + brcm,num-eq-region = <1>; + brcm,num-msi-msg-region = <1>; + }; + }; + + pcie4: pcie@50020000 { + compatible = "brcm,iproc-pcie"; + reg = <0 0x50020000 0 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>; + + linux,pci-domain = <4>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>; + + brcm,pcie-ob; + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x30000000>; + brcm,pcie-ob-window-size = <256>; + + status = "disabled"; + + msi-parent = <&msi4>; + msi4: msi@50020000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>, + <GIC_SPI 302 IRQ_TYPE_NONE>, + <GIC_SPI 303 IRQ_TYPE_NONE>, + <GIC_SPI 304 IRQ_TYPE_NONE>; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -256,6 +330,46 @@ <0x65260000 0x1000>; }; + timer0: timer@66030000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x66030000 0x1000>; + interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, + <&iprocslow>, + <&iprocslow>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer1: timer@66040000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x66040000 0x1000>; + interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, + <&iprocslow>, + <&iprocslow>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer2: timer@66050000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x66050000 0x1000>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, + <&iprocslow>, + <&iprocslow>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer3: timer@66060000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x66060000 0x1000>; + interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, + <&iprocslow>, + <&iprocslow>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + i2c0: i2c@66080000 { compatible = "brcm,iproc-i2c"; reg = <0x66080000 0x100>; @@ -266,6 +380,14 @@ status = "disabled"; }; + wdt0: watchdog@66090000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x66090000 0x1000>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>, <&iprocslow>; + clock-names = "wdogclk", "apb_pclk"; + }; + i2c1: i2c@660b0000 { compatible = "brcm,iproc-i2c"; reg = <0x660b0000 0x100>; @@ -291,6 +413,24 @@ reg = <0x66220000 0x28>; }; + sdio0: sdhci@66420000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x66420000 0x100>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; + status = "disabled"; + }; + + sdio1: sdhci@66430000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x66430000 0x100>; + interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; + status = "disabled"; + }; + nand: nand@66460000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x66460000 0x600>, diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi index da7b6e6..933cba3 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi @@ -23,9 +23,8 @@ soc0: soc@000000000 { }; }; - dsa: dsa@c7000000 { + dsaf0: dsa@c7000000 { compatible = "hisilicon,hns-dsaf-v1"; - dsa_name = "dsaf0"; mode = "6port-16rss"; interrupt-parent = <&mbigen_dsa>; @@ -127,7 +126,7 @@ soc0: soc@000000000 { eth0: ethernet@0{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <0>; local-mac-address = [00 00 00 01 00 58]; status = "disabled"; @@ -135,14 +134,14 @@ soc0: soc@000000000 { }; eth1: ethernet@1{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <1>; status = "disabled"; dma-coherent; }; eth2: ethernet@2{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <2>; local-mac-address = [00 00 00 01 00 5a]; status = "disabled"; @@ -150,7 +149,7 @@ soc0: soc@000000000 { }; eth3: ethernet@3{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <3>; local-mac-address = [00 00 00 01 00 5b]; status = "disabled"; @@ -158,7 +157,7 @@ soc0: soc@000000000 { }; eth4: ethernet@4{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <4>; local-mac-address = [00 00 00 01 00 5c]; status = "disabled"; @@ -166,7 +165,7 @@ soc0: soc@000000000 { }; eth5: ethernet@5{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <5>; local-mac-address = [00 00 00 01 00 5d]; status = "disabled"; @@ -174,7 +173,7 @@ soc0: soc@000000000 { }; eth6: ethernet@6{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <6>; local-mac-address = [00 00 00 01 00 5e]; status = "disabled"; @@ -182,7 +181,7 @@ soc0: soc@000000000 { }; eth7: ethernet@7{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <7>; local-mac-address = [00 00 00 01 00 5f]; status = "disabled"; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 348f4db..2114af8 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -1,6 +1,10 @@ +# Berlin SoC Family dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb +# Mvebu SoC Family +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb + always := $(dtb-y) subdir-y := $(dts-dirs) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi new file mode 100644 index 0000000..c9e5325 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-371x.dtsi @@ -0,0 +1,53 @@ +/* + * Device Tree Include file for Marvell Armada 371x family of SoCs + * (also named 88F3710) + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-37xx.dtsi" + +/ { + model = "Marvell Armada 3710 SoC"; + compatible = "marvell,armada3710", "marvell,armada3700"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts new file mode 100644 index 0000000..3590501 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -0,0 +1,86 @@ +/* + * Device Tree file for Marvell Armada 3720 development board + * (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "armada-372x.dtsi" + +/ { + model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3"; + compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + soc { + internal-regs { + /* + * Exported on the micro USB connector CON32 + * through an FTDI + */ + uart0: serial@12000 { + status = "okay"; + }; + + /* CON31 */ + usb3@58000 { + status = "okay"; + }; + + /* CON3 */ + sata@e0000 { + status = "okay"; + }; + }; + }; +}; + diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi new file mode 100644 index 0000000..f292a00 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Include file for Marvell Armada 372x family of SoCs + * (also named 88F3720) + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-37xx.dtsi" + +/ { + model = "Marvell Armada 3720 SoC"; + compatible = "marvell,armada3720", "marvell,armada3710"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x1>; + enable-method = "psci"; + }; + }; + +}; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi new file mode 100644 index 0000000..ba9df7f --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -0,0 +1,131 @@ +/* + * Device Tree Include file for Marvell Armada 37xx family of SoCs. + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Marvell Armada 37xx SoC"; + compatible = "marvell,armada3700"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + internal-regs { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + /* 32M internal register @ 0xd000_0000 */ + ranges = <0x0 0x0 0xd0000000 0x2000000>; + + uart0: serial@12000 { + compatible = "marvell,armada-3700-uart"; + reg = <0x12000 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usb3@58000 { + compatible = "generic-xhci"; + reg = <0x58000 0x4000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sata@e0000 { + compatible = "marvell,armada-3700-ahci"; + reg = <0xe0000 0x2000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gic: interrupt-controller@1d00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1d00000 0x10000>, /* GICD */ + <0x1d40000 0x40000>; /* GICR */ + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index e427f04..7453a47 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -214,6 +214,9 @@ }; &pwrap { + /* Only MT8173 E1 needs USB power domain */ + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + pmic: mt6397 { compatible = "mediatek,mt6397"; interrupt-parent = <&pio>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index ec135ea..f4bd3c9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -277,6 +277,11 @@ reg = <0 0x10200620 0 0x20>; }; + efuse: efuse@10206000 { + compatible = "mediatek,mt8173-efuse"; + reg = <0 0x10206000 0 0x1000>; + }; + apmixedsys: clock-controller@10209000 { compatible = "mediatek,mt8173-apmixedsys"; reg = <0 0x10209000 0 0x1000>; @@ -397,6 +402,17 @@ status = "disabled"; }; + nor_flash: spi@1100d000 { + compatible = "mediatek,mt8173-nor"; + reg = <0 0x1100d000 0 0xe0>; + clocks = <&pericfg CLK_PERI_SPI>, + <&topckgen CLK_TOP_SPINFI_IFR_SEL>; + clock-names = "spi", "sf"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c3: i2c@11010000 { compatible = "mediatek,mt8173-i2c"; reg = <0 0x11010000 0 0x70>, diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 7dfe1c0..62f33fc 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -12,6 +12,8 @@ rtc1 = "/rtc@0,7000e000"; }; + chosen { }; + memory { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 265d12f..b992b1a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "r8a7795.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Renesas Salvator-X board based on r8a7795"; @@ -61,6 +62,54 @@ clock-frequency = <24576000>; }; + vcc_sdhi0: regulator@1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator@2 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi3: regulator@3 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI3 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi3: regulator@4 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI3 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + audio_clkout: audio_clkout { /* * This is same as <&rcar_sound 0> @@ -93,6 +142,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif1_pins: scif1 { renesas,groups = "scif1_data_a", "scif1_ctrl"; renesas,function = "scif1"; @@ -101,6 +153,10 @@ renesas,groups = "scif2_data_a"; renesas,function = "scif2"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk_a"; + renesas,function = "scif_clk"; + }; i2c2_pins: i2c2 { renesas,groups = "i2c2_a"; @@ -112,6 +168,16 @@ renesas,function = "avb"; }; + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; + renesas,function = "sdhi0"; + }; + + sdhi3_pins: sd3 { + renesas,groups = "sdhi3_data4", "sdhi3_ctrl"; + renesas,function = "sdhi3"; + }; + sound_pins: sound { renesas,groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; renesas,function = "ssi"; @@ -122,6 +188,16 @@ "audio_clkout_a", "audio_clkout3_a"; renesas,function = "audio_clk"; }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; + + usb2_pins: usb2 { + renesas,groups = "usb2"; + renesas,function = "usb2"; + }; }; &scif1 { @@ -138,6 +214,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; @@ -216,6 +297,30 @@ status = "okay"; }; +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi3>; + vqmmc-supply = <&vccq_sdhi3>; + cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + status = "okay"; +}; + &ssi1 { shared-pin; }; @@ -249,3 +354,37 @@ interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; }; + +&xhci0 { + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy2 { + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index bb353cd..a7315eb 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -39,6 +39,7 @@ compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x0>; device_type = "cpu"; + next-level-cache = <&L2_CA57>; enable-method = "psci"; }; @@ -46,22 +47,37 @@ compatible = "arm,cortex-a57","arm,armv8"; reg = <0x1>; device_type = "cpu"; + next-level-cache = <&L2_CA57>; enable-method = "psci"; }; a57_2: cpu@2 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x2>; device_type = "cpu"; + next-level-cache = <&L2_CA57>; enable-method = "psci"; }; a57_3: cpu@3 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x3>; device_type = "cpu"; + next-level-cache = <&L2_CA57>; enable-method = "psci"; }; }; + L2_CA57: cache-controller@0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller@1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + }; + extal_clk: extal { compatible = "fixed-clock"; #clock-cells = <0>; @@ -99,6 +115,14 @@ clock-frequency = <0>; }; + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -113,7 +137,9 @@ #address-cells = <0>; interrupt-controller; reg = <0x0 0xf1010000 0 0x1000>, - <0x0 0xf1020000 0 0x2000>; + <0x0 0xf1020000 0 0x2000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; @@ -230,8 +256,8 @@ power-domains = <&cpg>; }; - pmu { - compatible = "arm,armv8-pmuv3"; + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, @@ -266,23 +292,23 @@ audma0: dma-controller@ec700000 { compatible = "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <0 350 IRQ_TYPE_LEVEL_HIGH - 0 320 IRQ_TYPE_LEVEL_HIGH - 0 321 IRQ_TYPE_LEVEL_HIGH - 0 322 IRQ_TYPE_LEVEL_HIGH - 0 323 IRQ_TYPE_LEVEL_HIGH - 0 324 IRQ_TYPE_LEVEL_HIGH - 0 325 IRQ_TYPE_LEVEL_HIGH - 0 326 IRQ_TYPE_LEVEL_HIGH - 0 327 IRQ_TYPE_LEVEL_HIGH - 0 328 IRQ_TYPE_LEVEL_HIGH - 0 329 IRQ_TYPE_LEVEL_HIGH - 0 330 IRQ_TYPE_LEVEL_HIGH - 0 331 IRQ_TYPE_LEVEL_HIGH - 0 332 IRQ_TYPE_LEVEL_HIGH - 0 333 IRQ_TYPE_LEVEL_HIGH - 0 334 IRQ_TYPE_LEVEL_HIGH - 0 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -298,23 +324,23 @@ audma1: dma-controller@ec720000 { compatible = "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <0 351 IRQ_TYPE_LEVEL_HIGH - 0 336 IRQ_TYPE_LEVEL_HIGH - 0 337 IRQ_TYPE_LEVEL_HIGH - 0 338 IRQ_TYPE_LEVEL_HIGH - 0 339 IRQ_TYPE_LEVEL_HIGH - 0 340 IRQ_TYPE_LEVEL_HIGH - 0 341 IRQ_TYPE_LEVEL_HIGH - 0 342 IRQ_TYPE_LEVEL_HIGH - 0 343 IRQ_TYPE_LEVEL_HIGH - 0 344 IRQ_TYPE_LEVEL_HIGH - 0 345 IRQ_TYPE_LEVEL_HIGH - 0 346 IRQ_TYPE_LEVEL_HIGH - 0 347 IRQ_TYPE_LEVEL_HIGH - 0 348 IRQ_TYPE_LEVEL_HIGH - 0 349 IRQ_TYPE_LEVEL_HIGH - 0 382 IRQ_TYPE_LEVEL_HIGH - 0 383 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -332,20 +358,123 @@ reg = <0 0xe6060000 0 0x50c>; }; + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a7795", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&cpg>; + }; + dmac0: dma-controller@e6700000 { - /* Empty node for now */ + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <16>; }; dmac1: dma-controller@e7300000 { - /* Empty node for now */ + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <16>; }; dmac2: dma-controller@e7310000 { - /* Empty node for now */ + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <16>; }; avb: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7795"; + compatible = "renesas,etheravb-r8a7795", + "renesas,etheravb-rcar-gen3"; reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, @@ -387,11 +516,15 @@ }; hscif0: serial@e6540000 { - compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe6540000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 520>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x31>, <&dmac1 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -399,11 +532,15 @@ }; hscif1: serial@e6550000 { - compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe6550000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 519>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x33>, <&dmac1 0x32>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -411,11 +548,15 @@ }; hscif2: serial@e6560000 { - compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe6560000 0 96>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 518>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x35>, <&dmac1 0x34>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -423,11 +564,15 @@ }; hscif3: serial@e66a0000 { - compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe66a0000 0 96>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 517>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -435,11 +580,15 @@ }; hscif4: serial@e66b0000 { - compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe66b0000 0 96>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 516>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -447,11 +596,14 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 207>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x51>, <&dmac1 0x50>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -459,11 +611,14 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 206>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x53>, <&dmac1 0x52>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -471,11 +626,14 @@ }; scif2: serial@e6e88000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 310>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -483,11 +641,14 @@ }; scif3: serial@e6c50000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 204>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -495,11 +656,14 @@ }; scif4: serial@e6c40000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 203>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -507,11 +671,14 @@ }; scif5: serial@e6f30000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6f30000 0 64>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 202>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -663,52 +830,52 @@ rcar_sound,src { src0: src@0 { - interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; src1: src@1 { - interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; src2: src@2 { - interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; src3: src@3 { - interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; src4: src@4 { - interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; src5: src@5 { - interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; src6: src@6 { - interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; src7: src@7 { - interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; src8: src@8 { - interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; src9: src@9 { - interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; }; @@ -716,52 +883,52 @@ rcar_sound,ssi { ssi0: ssi@0 { - interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi1: ssi@1 { - interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi2: ssi@2 { - interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi3: ssi@3 { - interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi4: ssi@4 { - interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi5: ssi@5 { - interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi6: ssi@6 { - interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi7: ssi@7 { - interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi8: ssi@8 { - interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; ssi9: ssi@9 { - interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; }; @@ -775,5 +942,181 @@ clocks = <&cpg CPG_MOD 815>; status = "disabled"; }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a7795"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&cpg>; + status = "disabled"; + }; + + xhci1: usb@ee0400000 { + compatible = "renesas,xhci-r8a7795"; + reg = <0 0xee040000 0 0xc00>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 327>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7795-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7795-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7795"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7795"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7795"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + power-domains = <&cpg>; + cap-mmc-highspeed; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7795"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + power-domains = <&cpg>; + cap-mmc-highspeed; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a7795"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&cpg>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a7795"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&cpg>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb2_phy2: usb-phy@ee0c0200 { + compatible = "renesas,usb2-phy-r8a7795"; + reg = <0 0xee0c0200 0 0x700>; + clocks = <&cpg CPG_MOD 701>; + power-domains = <&cpg>; + #phy-cells = <0>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci2: usb@ee0c0100 { + compatible = "generic-ehci"; + reg = <0 0xee0c0100 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 701>; + phys = <&usb2_phy2>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci2: usb@ee0c0000 { + compatible = "generic-ohci"; + reg = <0 0xee0c0000 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 701>; + phys = <&usb2_phy2>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index 8c219cc..6e27b22 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -111,7 +111,7 @@ pinctrl-0 = <&pwr_key>; button@0 { - gpio-key,wakeup = <1>; + wakeup-source; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <116>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 104cbee..1f2b642 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -71,7 +71,7 @@ pinctrl-0 = <&pwr_key>; button@0 { - gpio-key,wakeup = <1>; + wakeup-source; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <116>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 122777b..49d1191 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -231,8 +231,9 @@ compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0c0000 0x0 0x4000>; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -254,8 +255,9 @@ compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0f0000 0x0 0x4000>; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi new file mode 100644 index 0000000..cdc6a43 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi @@ -0,0 +1,88 @@ +/* + * clock specification for Xilinx ZynqMP ep108 development board + * + * (C) Copyright 2015, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +&amba { + misc_clk: misc_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + i2c_clk: i2c_clk { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <111111111>; + }; + + sata_clk: sata_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <75000000>; + }; +}; + +&can0 { + clocks = <&misc_clk &misc_clk>; +}; + +&gem0 { + clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; +}; + +&gpio { + clocks = <&misc_clk>; +}; + +&i2c0 { + clocks = <&i2c_clk>; +}; + +&i2c1 { + clocks = <&i2c_clk>; +}; + +&sata { + clocks = <&sata_clk>; +}; + +&sdhci0 { + clocks = <&misc_clk>, <&misc_clk>; +}; + +&sdhci1 { + clocks = <&misc_clk>, <&misc_clk>; +}; + +&spi0 { + clocks = <&misc_clk &misc_clk>; +}; + +&spi1 { + clocks = <&misc_clk &misc_clk>; +}; + +&uart0 { + clocks = <&misc_clk &misc_clk>; +}; + +&usb0 { + clocks = <&misc_clk>, <&misc_clk>; +}; + +&usb1 { + clocks = <&misc_clk>, <&misc_clk>; +}; + +&watchdog0 { + clocks= <&misc_clk>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index ce5d848..acb0527 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -14,6 +14,7 @@ /dts-v1/; /include/ "zynqmp.dtsi" +/include/ "zynqmp-ep108-clk.dtsi" / { model = "ZynqMP EP108"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 200fb58..e595f22 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -90,7 +90,7 @@ }; }; - amba { + amba: amba { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <1>; @@ -99,7 +99,6 @@ can0: can@ff060000 { compatible = "xlnx,zynq-can-1.0"; status = "disabled"; - clocks = <&misc_clk &misc_clk>; clock-names = "can_clk", "pclk"; reg = <0x0 0xff060000 0x1000>; interrupts = <0 23 4>; @@ -111,7 +110,6 @@ can1: can@ff070000 { compatible = "xlnx,zynq-can-1.0"; status = "disabled"; - clocks = <&misc_clk &misc_clk>; clock-names = "can_clk", "pclk"; reg = <0x0 0xff070000 0x1000>; interrupts = <0 24 4>; @@ -120,24 +118,6 @@ rx-fifo-depth = <0x40>; }; - misc_clk: misc_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gpio: gpio@ff0a0000 { - compatible = "xlnx,zynqmp-gpio-1.0"; - status = "disabled"; - #gpio-cells = <0x2>; - clocks = <&misc_clk>; - interrupt-parent = <&gic>; - interrupts = <0 16 4>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x0 0xff0a0000 0x1000>; - }; - gem0: ethernet@ff0b0000 { compatible = "cdns,gem"; status = "disabled"; @@ -145,7 +125,6 @@ interrupts = <0 57 4>, <0 57 4>; reg = <0x0 0xff0b0000 0x1000>; clock-names = "pclk", "hclk", "tx_clk"; - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; #address-cells = <1>; #size-cells = <0>; }; @@ -157,7 +136,6 @@ interrupts = <0 59 4>, <0 59 4>; reg = <0x0 0xff0c0000 0x1000>; clock-names = "pclk", "hclk", "tx_clk"; - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; #address-cells = <1>; #size-cells = <0>; }; @@ -169,7 +147,6 @@ interrupts = <0 61 4>, <0 61 4>; reg = <0x0 0xff0d0000 0x1000>; clock-names = "pclk", "hclk", "tx_clk"; - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; #address-cells = <1>; #size-cells = <0>; }; @@ -181,15 +158,19 @@ interrupts = <0 63 4>, <0 63 4>; reg = <0x0 0xff0e0000 0x1000>; clock-names = "pclk", "hclk", "tx_clk"; - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; #address-cells = <1>; #size-cells = <0>; }; - i2c_clk: i2c_clk { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <111111111>; + gpio: gpio@ff0a0000 { + compatible = "xlnx,zynqmp-gpio-1.0"; + status = "disabled"; + #gpio-cells = <0x2>; + interrupt-parent = <&gic>; + interrupts = <0 16 4>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0xff0a0000 0x1000>; }; i2c0: i2c@ff020000 { @@ -198,7 +179,6 @@ interrupt-parent = <&gic>; interrupts = <0 17 4>; reg = <0x0 0xff020000 0x1000>; - clocks = <&i2c_clk>; #address-cells = <1>; #size-cells = <0>; }; @@ -209,24 +189,16 @@ interrupt-parent = <&gic>; interrupts = <0 18 4>; reg = <0x0 0xff030000 0x1000>; - clocks = <&i2c_clk>; #address-cells = <1>; #size-cells = <0>; }; - sata_clk: sata_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <75000000>; - }; - sata: ahci@fd0c0000 { compatible = "ceva,ahci-1v84"; status = "disabled"; reg = <0x0 0xfd0c0000 0x2000>; interrupt-parent = <&gic>; interrupts = <0 133 4>; - clocks = <&sata_clk>; }; sdhci0: sdhci@ff160000 { @@ -236,7 +208,6 @@ interrupts = <0 48 4>; reg = <0x0 0xff160000 0x1000>; clock-names = "clk_xin", "clk_ahb"; - clocks = <&misc_clk>, <&misc_clk>; }; sdhci1: sdhci@ff170000 { @@ -246,7 +217,6 @@ interrupts = <0 49 4>; reg = <0x0 0xff170000 0x1000>; clock-names = "clk_xin", "clk_ahb"; - clocks = <&misc_clk>, <&misc_clk>; }; smmu: smmu@fd800000 { @@ -268,7 +238,6 @@ interrupts = <0 19 4>; reg = <0x0 0xff040000 0x1000>; clock-names = "ref_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; #address-cells = <1>; #size-cells = <0>; }; @@ -280,7 +249,6 @@ interrupts = <0 20 4>; reg = <0x0 0xff050000 0x1000>; clock-names = "ref_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; #address-cells = <1>; #size-cells = <0>; }; @@ -291,7 +259,6 @@ interrupt-parent = <&gic>; interrupts = <0 36 4>, <0 37 4>, <0 38 4>; reg = <0x0 0xff110000 0x1000>; - clocks = <&misc_clk>; timer-width = <32>; }; @@ -301,7 +268,6 @@ interrupt-parent = <&gic>; interrupts = <0 39 4>, <0 40 4>, <0 41 4>; reg = <0x0 0xff120000 0x1000>; - clocks = <&misc_clk>; timer-width = <32>; }; @@ -311,7 +277,6 @@ interrupt-parent = <&gic>; interrupts = <0 42 4>, <0 43 4>, <0 44 4>; reg = <0x0 0xff130000 0x1000>; - clocks = <&misc_clk>; timer-width = <32>; }; @@ -321,7 +286,6 @@ interrupt-parent = <&gic>; interrupts = <0 45 4>, <0 46 4>, <0 47 4>; reg = <0x0 0xff140000 0x1000>; - clocks = <&misc_clk>; timer-width = <32>; }; @@ -332,7 +296,6 @@ interrupts = <0 21 4>; reg = <0x0 0xff000000 0x1000>; clock-names = "uart_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; }; uart1: serial@ff010000 { @@ -342,7 +305,6 @@ interrupts = <0 22 4>; reg = <0x0 0xff010000 0x1000>; clock-names = "uart_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; }; usb0: usb@fe200000 { @@ -352,7 +314,6 @@ interrupts = <0 65 4>; reg = <0x0 0xfe200000 0x40000>; clock-names = "clk_xin", "clk_ahb"; - clocks = <&misc_clk>, <&misc_clk>; }; usb1: usb@fe300000 { @@ -362,13 +323,11 @@ interrupts = <0 70 4>; reg = <0x0 0xfe300000 0x40000>; clock-names = "clk_xin", "clk_ahb"; - clocks = <&misc_clk>, <&misc_clk>; }; watchdog0: watchdog@fd4d0000 { compatible = "cdns,wdt-r1p2"; status = "disabled"; - clocks= <&misc_clk>; interrupt-parent = <&gic>; interrupts = <0 52 1>; reg = <0x0 0xfd4d0000 0x1000>; |