diff options
Diffstat (limited to 'arch/arm64/boot')
-rw-r--r-- | arch/arm64/boot/dts/qcom/Makefile | 1 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 2 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi | 14 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 170 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 238 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916.dtsi | 48 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8996-mtp.dts | 21 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi | 30 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8996.dtsi | 269 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/pm8004.dtsi | 19 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/pm8916.dtsi | 10 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/pm8994.dtsi | 62 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/pmi8994.dtsi | 19 |
13 files changed, 880 insertions, 23 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 8e94af6..fa1f661 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi index e03c11d..f881437 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -33,7 +33,7 @@ pm8916_mpps_leds: pm8916_mpps_leds { pinconf { pins = "mpp2", "mpp3"; - function = PMIC_GPIO_FUNC_NORMAL; + function = "digital"; output-low; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi index cbeee0b..ee828a8 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi @@ -10,4 +10,18 @@ output-low; }; }; + + usb_id_default: usb-id-default { + pinmux { + function = "gpio"; + pins = "gpio121"; + }; + + pinconf { + pins = "gpio121"; + drive-strength = <8>; + input-enable; + bias-pull-up; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index db17c5d..205ef89 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -24,6 +24,8 @@ i2c0 = &blsp_i2c2; i2c1 = &blsp_i2c6; i2c3 = &blsp_i2c4; + spi0 = &blsp_spi5; + spi1 = &blsp_spi3; }; chosen { @@ -127,9 +129,173 @@ default-state = "off"; }; }; + + sdhci@07824000 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + status = "okay"; + }; + + usb@78d9000 { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; + }; + + ehci@78d9000 { + status = "okay"; + }; + + phy@78d9000 { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + vddcx-supply = <&pm8916_s1>; + extcon = <&usb_id>, <&usb_id>; + dr_mode = "otg"; + status = "okay"; + switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_sw_sel_pm>; + }; + + lpass@07708000 { + status = "okay"; + }; + }; + + usb2513 { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; }; }; -&sdhc_1 { - status = "okay"; +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l5-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s1 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1562000>; + }; + + s3 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1562000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1525000>; + }; + + l2 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1525000>; + }; + + l3 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1525000>; + }; + + l4 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l5 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l6 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l7 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l8 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l9 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l10 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l11 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l12 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l13 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l14 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + l15 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + regulator-always-on; + }; + + l16 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l17 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l18 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 955c6f1..10c83e1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -82,7 +82,7 @@ }; pinconf_cs { pins = "gpio2"; - drive-strength = <2>; + drive-strength = <16>; bias-disable; output-high; }; @@ -110,13 +110,13 @@ pins = "gpio6"; }; pinconf { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; + pins = "gpio4", "gpio5", "gpio7"; drive-strength = <12>; bias-disable; }; pinconf_cs { pins = "gpio6"; - drive-strength = <2>; + drive-strength = <16>; bias-disable; output-high; }; @@ -144,13 +144,13 @@ pins = "gpio10"; }; pinconf { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; + pins = "gpio8", "gpio9", "gpio11"; drive-strength = <12>; bias-disable; }; pinconf_cs { pins = "gpio10"; - drive-strength = <2>; + drive-strength = <16>; bias-disable; output-high; }; @@ -178,13 +178,13 @@ pins = "gpio14"; }; pinconf { - pins = "gpio12", "gpio13", "gpio14", "gpio15"; + pins = "gpio12", "gpio13", "gpio15"; drive-strength = <12>; bias-disable; }; pinconf_cs { pins = "gpio14"; - drive-strength = <2>; + drive-strength = <16>; bias-disable; output-high; }; @@ -212,13 +212,13 @@ pins = "gpio18"; }; pinconf { - pins = "gpio16", "gpio17", "gpio18", "gpio19"; + pins = "gpio16", "gpio17", "gpio19"; drive-strength = <12>; bias-disable; }; pinconf_cs { pins = "gpio18"; - drive-strength = <2>; + drive-strength = <16>; bias-disable; output-high; }; @@ -246,13 +246,13 @@ pins = "gpio22"; }; pinconf { - pins = "gpio20", "gpio21", "gpio22", "gpio23"; + pins = "gpio20", "gpio21", "gpio23"; drive-strength = <12>; bias-disable; }; pinconf_cs { pins = "gpio22"; - drive-strength = <2>; + drive-strength = <16>; bias-disable; output-high; }; @@ -504,4 +504,220 @@ }; }; }; + + ext-codec-lines { + ext_codec_lines_act: lines_on { + pinmux { + function = "gpio"; + pins = "gpio67"; + }; + pinconf { + pins = "gpio67"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; + ext_codec_lines_sus: lines_off { + pinmux { + function = "gpio"; + pins = "gpio67"; + }; + pinconf { + pins = "gpio67"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + cdc-pdm-lines { + cdc_pdm_lines_act: pdm_lines_on { + pinmux { + function = "cdc_pdm0"; + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + }; + pinconf { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + drive-strength = <8>; + bias-pull-none; + }; + }; + cdc_pdm_lines_sus: pdm_lines_off { + pinmux { + function = "cdc_pdm0"; + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + }; + pinconf { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + ext-pri-tlmm-lines { + ext_pri_tlmm_lines_act: ext_pa_on { + pinmux { + function = "pri_mi2s"; + pins = "gpio113", "gpio114", "gpio115", + "gpio116"; + }; + pinconf { + pins = "gpio113", "gpio114", "gpio115", + "gpio116"; + drive-strength = <8>; + bias-pull-none; + }; + }; + + ext_pri_tlmm_lines_sus: ext_pa_off { + pinmux { + function = "pri_mi2s"; + pins = "gpio113", "gpio114", "gpio115", + "gpio116"; + }; + pinconf { + pins = "gpio113", "gpio114", "gpio115", + "gpio116"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + ext-pri-ws-line { + ext_pri_ws_act: ext_pa_on { + pinmux { + function = "pri_mi2s_ws"; + pins = "gpio110"; + }; + pinconf { + pins = "gpio110"; + drive-strength = <8>; + bias-pull-none; + }; + }; + + ext_pri_ws_sus: ext_pa_off { + pinmux { + function = "pri_mi2s_ws"; + pins = "gpio110"; + }; + pinconf { + pins = "gpio110"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + ext-mclk-tlmm-lines { + ext_mclk_tlmm_lines_act: mclk_lines_on { + pinmux { + function = "pri_mi2s"; + pins = "gpio116"; + }; + pinconf { + pins = "gpio116"; + drive-strength = <8>; + bias-pull-none; + }; + }; + ext_mclk_tlmm_lines_sus: mclk_lines_off { + pinmux { + function = "pri_mi2s"; + pins = "gpio116"; + }; + pinconf { + pins = "gpio116"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + /* secondary Mi2S */ + ext-sec-tlmm-lines { + ext_sec_tlmm_lines_act: tlmm_lines_on { + pinmux { + function = "sec_mi2s"; + pins = "gpio112", "gpio117", "gpio118", + "gpio119"; + }; + pinconf { + pins = "gpio112", "gpio117", "gpio118", + "gpio119"; + drive-strength = <8>; + bias-pull-none; + }; + }; + ext_sec_tlmm_lines_sus: tlmm_lines_off { + pinmux { + function = "sec_mi2s"; + pins = "gpio112", "gpio117", "gpio118", + "gpio119"; + }; + pinconf { + pins = "gpio112", "gpio117", "gpio118", + "gpio119"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + cdc-dmic-lines { + cdc_dmic_lines_act: dmic_lines_on { + pinmux_dmic0_clk { + function = "dmic0_clk"; + pins = "gpio0"; + }; + pinmux_dmic0_data { + function = "dmic0_data"; + pins = "gpio1"; + }; + pinconf { + pins = "gpio0", "gpio1"; + drive-strength = <8>; + }; + }; + cdc_dmic_lines_sus: dmic_lines_off { + pinconf { + pins = "gpio0", "gpio1"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + cross-conn-det { + cross_conn_det_act: lines_on { + pinmux { + function = "gpio"; + pins = "gpio120"; + }; + pinconf { + pins = "gpio120"; + drive-strength = <8>; + output-low; + bias-pull-down; + }; + }; + cross_conn_det_sus: lines_off { + pinmux { + function = "gpio"; + pins = "gpio120"; + }; + pinconf { + pins = "gpio120"; + drive-strength = <2>; + bias-disable; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 9153214..9681200 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -61,24 +61,33 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0>; + next-level-cache = <&L2_0>; }; CPU1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x1>; + next-level-cache = <&L2_0>; }; CPU2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x2>; + next-level-cache = <&L2_0>; }; CPU3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x3>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; }; }; @@ -134,7 +143,7 @@ #interrupt-cells = <2>; }; - gcc: qcom,gcc@1800000 { + gcc: clock-controller@1800000 { compatible = "qcom,gcc-msm8916"; #clock-cells = <1>; #reset-cells = <1>; @@ -343,6 +352,32 @@ status = "disabled"; }; + lpass: lpass@07708000 { + status = "disabled"; + compatible = "qcom,lpass-cpu-apq8016"; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; + + clock-names = "ahbix-clk", + "pcnoc-mport-clk", + "pcnoc-sway-clk", + "mi2s-bit-clk0", + "mi2s-bit-clk1", + "mi2s-bit-clk2", + "mi2s-bit-clk3"; + #sound-dai-cells = <1>; + + interrupts = <0 160 0>; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x07708000 0x10000>; + reg-names = "lpass-lpaif"; + }; + sdhc_1: sdhci@07824000 { compatible = "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; @@ -395,10 +430,11 @@ interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>, <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; - qcom,vdd-levels = <1 5 7>; + qcom,vdd-levels = <500000 1000000 1320000>; qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>; dr_mode = "peripheral"; qcom,otg-control = <2>; // PMIC + qcom,manual-pullup; clocks = <&gcc GCC_USB_HS_AHB_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, @@ -515,11 +551,15 @@ compatible = "qcom,rpm-msm8916"; qcom,smd-channels = "rpm_requests"; - pm8916-regulators { + rpmcc: qcom,rpmcc { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + smd_rpm_regulators: pm8916-regulators { compatible = "qcom,rpm-pm8916-regulators"; pm8916_s1: s1 {}; - pm8916_s2: s2 {}; pm8916_s3: s3 {}; pm8916_s4: s4 {}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts new file mode 100644 index 0000000..619af44 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -0,0 +1,21 @@ +/* + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "msm8996-mtp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM 8996 MTP"; + compatible = "qcom,msm8996-mtp"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi new file mode 100644 index 0000000..9bab5c0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "msm8996.dtsi" + +/ { + aliases { + serial0 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + serial@75b0000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi new file mode 100644 index 0000000..0506fb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -0,0 +1,269 @@ +/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8996.h> +#include <dt-bindings/clock/qcom,mmcc-msm8996.h> + +/ { + model = "Qualcomm Technologies, Inc. MSM8996"; + + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU3: cpu@101 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU2>; + }; + + core1 { + cpu = <&CPU3>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + clocks { + xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + intc: interrupt-controller@9bc0000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x09bc0000 0x10000>, + <0x09c00000 0x100000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + gcc: clock-controller@300000 { + compatible = "qcom,gcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x300000 0x90000>; + }; + + blsp2_uart1: serial@75b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x75b0000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + pinctrl@1010000 { + compatible = "qcom,msm8996-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + timer@09840000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x09840000 0x1000>; + clock-frequency = <19200000>; + + frame@9850000 { + frame-number = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09850000 0x1000>, + <0x09860000 0x1000>; + }; + + frame@9870000 { + frame-number = <1>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09870000 0x1000>; + status = "disabled"; + }; + + frame@9880000 { + frame-number = <2>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09880000 0x1000>; + status = "disabled"; + }; + + frame@9890000 { + frame-number = <3>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09890000 0x1000>; + status = "disabled"; + }; + + frame@98a0000 { + frame-number = <4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x098a0000 0x1000>; + status = "disabled"; + }; + + frame@98b0000 { + frame-number = <5>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x098b0000 0x1000>; + status = "disabled"; + }; + + frame@98c0000 { + frame-number = <6>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x098c0000 0x1000>; + status = "disabled"; + }; + }; + + spmi_bus: qcom,spmi@400f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x400f000 0x1000>, + <0x4400000 0x800000>, + <0x4c00000 0x800000>, + <0x5800000 0x200000>, + <0x400a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 326 IRQ_TYPE_NONE>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + mmcc: clock-controller@8c0000 { + compatible = "qcom,mmcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x8c0000 0x40000>; + assigned-clocks = <&mmcc MMPLL9_PLL>, + <&mmcc MMPLL1_PLL>, + <&mmcc MMPLL3_PLL>, + <&mmcc MMPLL4_PLL>, + <&mmcc MMPLL5_PLL>; + assigned-clock-rates = <624000000>, + <810000000>, + <980000000>, + <960000000>, + <825000000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi new file mode 100644 index 0000000..ef2207a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi @@ -0,0 +1,19 @@ +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + pmic@4 { + compatible = "qcom,pm8004", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@5 { + compatible = "qcom,pm8004", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 3743245..f71679b 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -12,7 +12,7 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000 0x6100>; + reg = <0x6000>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; @@ -27,7 +27,7 @@ pm8916_gpios: gpios@c000 { compatible = "qcom,pm8916-gpio"; - reg = <0xc000 0x400>; + reg = <0xc000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, @@ -38,7 +38,7 @@ pm8916_mpps: mpps@a000 { compatible = "qcom,pm8916-mpp"; - reg = <0xa000 0x400>; + reg = <0xa000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, @@ -49,7 +49,7 @@ pm8916_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; io-channels = <&pm8916_vadc VADC_DIE_TEMP>; io-channel-names = "thermal"; @@ -58,7 +58,7 @@ pm8916_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; - reg = <0x3100 0x100>; + reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi new file mode 100644 index 0000000..1222d2e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -0,0 +1,62 @@ +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + pmic@0 { + compatible = "qcom,pm8994", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8994_gpios: gpios@c000 { + compatible = "qcom,pm8994-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>, + <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xd0 0 IRQ_TYPE_NONE>, + <0 0xd1 0 IRQ_TYPE_NONE>, + <0 0xd2 0 IRQ_TYPE_NONE>, + <0 0xd3 0 IRQ_TYPE_NONE>, + <0 0xd4 0 IRQ_TYPE_NONE>, + <0 0xd5 0 IRQ_TYPE_NONE>; + }; + + pm8994_mpps: mpps@a000 { + compatible = "qcom,pm8994-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>, + <0 0xa4 0 IRQ_TYPE_NONE>, + <0 0xa5 0 IRQ_TYPE_NONE>, + <0 0xa6 0 IRQ_TYPE_NONE>, + <0 0xa7 0 IRQ_TYPE_NONE>; + }; + }; + + pmic@1 { + compatible = "qcom,pm8994", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi new file mode 100644 index 0000000..d3879a4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -0,0 +1,19 @@ +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + pmic@2 { + compatible = "qcom,pmi8994", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pmic@3 { + compatible = "qcom,pmi8994", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; |