diff options
Diffstat (limited to 'arch/arm64')
-rw-r--r-- | arch/arm64/Kconfig | 6 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/armada-3720-db.dts | 5 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 25 | ||||
-rw-r--r-- | arch/arm64/kernel/pci.c | 159 |
4 files changed, 172 insertions, 23 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 1b06db5..69c8787 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -3,6 +3,7 @@ config ARM64 select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI + select ACPI_MCFG if ACPI select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE @@ -22,9 +23,9 @@ config ARM64 select ARM_ARCH_TIMER select ARM_GIC select AUDIT_ARCH_COMPAT_GENERIC - select ARM_GIC_V2M if PCI_MSI + select ARM_GIC_V2M if PCI select ARM_GIC_V3 - select ARM_GIC_V3_ITS if PCI_MSI + select ARM_GIC_V3_ITS if PCI select ARM_PSCI_FW select BUILDTIME_EXTABLE_SORT select CLONE_BACKWARDS @@ -102,6 +103,7 @@ config ARM64 select OF_EARLY_FLATTREE select OF_NUMA if NUMA && OF select OF_RESERVED_MEM + select PCI_ECAM if ACPI select PERF_USE_VMALLOC select POWER_RESET select POWER_SUPPLY diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 86110a6..1372e9a6 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -76,3 +76,8 @@ &usb3 { status = "okay"; }; + +/* CON17 (PCIe) / CON12 (mini-PCIe) */ +&pcie0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index eb29280..c476253 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -176,5 +176,30 @@ <0x1d40000 0x40000>; /* GICR */ }; }; + + pcie0: pcie@d0070000 { + compatible = "marvell,armada-3700-pcie"; + device_type = "pci"; + status = "disabled"; + reg = <0 0xd0070000 0 0x20000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + msi-parent = <&pcie0>; + msi-controller; + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */ + 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/ + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; }; }; diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c index 3c4e308..acf3872 100644 --- a/arch/arm64/kernel/pci.c +++ b/arch/arm64/kernel/pci.c @@ -17,6 +17,9 @@ #include <linux/mm.h> #include <linux/of_pci.h> #include <linux/of_platform.h> +#include <linux/pci.h> +#include <linux/pci-acpi.h> +#include <linux/pci-ecam.h> #include <linux/slab.h> /* @@ -36,25 +39,17 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, return res->start; } -/** - * pcibios_enable_device - Enable I/O and memory. - * @dev: PCI device to be enabled - * @mask: bitmask of BARs to enable - */ -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - if (pci_has_flag(PCI_PROBE_ONLY)) - return 0; - - return pci_enable_resources(dev, mask); -} - /* - * Try to assign the IRQ number from DT when adding a new device + * Try to assign the IRQ number when probing a new device */ -int pcibios_add_device(struct pci_dev *dev) +int pcibios_alloc_irq(struct pci_dev *dev) { - dev->irq = of_irq_parse_and_map_pci(dev, 0, 0); + if (acpi_disabled) + dev->irq = of_irq_parse_and_map_pci(dev, 0, 0); +#ifdef CONFIG_ACPI + else + return acpi_pci_irq_enable(dev); +#endif return 0; } @@ -65,13 +60,21 @@ int pcibios_add_device(struct pci_dev *dev) int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, int reg, int len, u32 *val) { - return -ENXIO; + struct pci_bus *b = pci_find_bus(domain, bus); + + if (!b) + return PCIBIOS_DEVICE_NOT_FOUND; + return b->ops->read(b, devfn, reg, len, val); } int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn, int reg, int len, u32 val) { - return -ENXIO; + struct pci_bus *b = pci_find_bus(domain, bus); + + if (!b) + return PCIBIOS_DEVICE_NOT_FOUND; + return b->ops->write(b, devfn, reg, len, val); } #ifdef CONFIG_NUMA @@ -85,10 +88,124 @@ EXPORT_SYMBOL(pcibus_to_node); #endif #ifdef CONFIG_ACPI -/* Root bridge scanning */ + +struct acpi_pci_generic_root_info { + struct acpi_pci_root_info common; + struct pci_config_window *cfg; /* config space mapping */ +}; + +int acpi_pci_bus_find_domain_nr(struct pci_bus *bus) +{ + struct pci_config_window *cfg = bus->sysdata; + struct acpi_device *adev = to_acpi_device(cfg->parent); + struct acpi_pci_root *root = acpi_driver_data(adev); + + return root->segment; +} + +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) +{ + if (!acpi_disabled) { + struct pci_config_window *cfg = bridge->bus->sysdata; + struct acpi_device *adev = to_acpi_device(cfg->parent); + ACPI_COMPANION_SET(&bridge->dev, adev); + } + + return 0; +} + +/* + * Lookup the bus range for the domain in MCFG, and set up config space + * mapping. + */ +static struct pci_config_window * +pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root) +{ + struct resource *bus_res = &root->secondary; + u16 seg = root->segment; + struct pci_config_window *cfg; + struct resource cfgres; + unsigned int bsz; + + /* Use address from _CBA if present, otherwise lookup MCFG */ + if (!root->mcfg_addr) + root->mcfg_addr = pci_mcfg_lookup(seg, bus_res); + + if (!root->mcfg_addr) { + dev_err(&root->device->dev, "%04x:%pR ECAM region not found\n", + seg, bus_res); + return NULL; + } + + bsz = 1 << pci_generic_ecam_ops.bus_shift; + cfgres.start = root->mcfg_addr + bus_res->start * bsz; + cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1; + cfgres.flags = IORESOURCE_MEM; + cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res, + &pci_generic_ecam_ops); + if (IS_ERR(cfg)) { + dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n", + seg, bus_res, PTR_ERR(cfg)); + return NULL; + } + + return cfg; +} + +/* release_info: free resources allocated by init_info */ +static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci) +{ + struct acpi_pci_generic_root_info *ri; + + ri = container_of(ci, struct acpi_pci_generic_root_info, common); + pci_ecam_free(ri->cfg); + kfree(ri); +} + +static struct acpi_pci_root_ops acpi_pci_root_ops = { + .release_info = pci_acpi_generic_release_info, +}; + +/* Interface called from ACPI code to setup PCI host controller */ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) { - /* TODO: Should be revisited when implementing PCI on ACPI */ - return NULL; + int node = acpi_get_node(root->device->handle); + struct acpi_pci_generic_root_info *ri; + struct pci_bus *bus, *child; + + ri = kzalloc_node(sizeof(*ri), GFP_KERNEL, node); + if (!ri) + return NULL; + + ri->cfg = pci_acpi_setup_ecam_mapping(root); + if (!ri->cfg) { + kfree(ri); + return NULL; + } + + acpi_pci_root_ops.pci_ops = &ri->cfg->ops->pci_ops; + bus = acpi_pci_root_create(root, &acpi_pci_root_ops, &ri->common, + ri->cfg); + if (!bus) + return NULL; + + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); + + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + + return bus; } + +void pcibios_add_bus(struct pci_bus *bus) +{ + acpi_pci_add_bus(bus); +} + +void pcibios_remove_bus(struct pci_bus *bus) +{ + acpi_pci_remove_bus(bus); +} + #endif |