diff options
Diffstat (limited to 'arch/arm64')
42 files changed, 1091 insertions, 205 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 99930cf..0f6edb1 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1,5 +1,6 @@ config ARM64 def_bool y + select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE @@ -22,6 +23,7 @@ config ARM64 select BUILDTIME_EXTABLE_SORT select CLONE_BACKWARDS select COMMON_CLK + select EDAC_SUPPORT select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS select GENERIC_ALLOCATOR @@ -182,6 +184,11 @@ config ARCH_FSL_LS2085A help This enables support for Freescale LS2085A SOC. +config ARCH_HISI + bool "Hisilicon SoC Family" + help + This enables support for Hisilicon ARMv8 SoC family + config ARCH_MEDIATEK bool "Mediatek MT65xx & MT81xx ARMv8 SoC" select ARM_GIC diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index ad26a75..38913be 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -4,6 +4,7 @@ dts-dirs += arm dts-dirs += cavium dts-dirs += exynos dts-dirs += freescale +dts-dirs += hisilicon dts-dirs += mediatek dts-dirs += qcom dts-dirs += sprd diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index c8d3e0e..0689c3f 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -374,6 +374,111 @@ }; }; + msi: msi@79000000 { + compatible = "apm,xgene1-msi"; + msi-controller; + reg = <0x00 0x79000000 0x0 0x900000>; + interrupts = < 0x0 0x10 0x4 + 0x0 0x11 0x4 + 0x0 0x12 0x4 + 0x0 0x13 0x4 + 0x0 0x14 0x4 + 0x0 0x15 0x4 + 0x0 0x16 0x4 + 0x0 0x17 0x4 + 0x0 0x18 0x4 + 0x0 0x19 0x4 + 0x0 0x1a 0x4 + 0x0 0x1b 0x4 + 0x0 0x1c 0x4 + 0x0 0x1d 0x4 + 0x0 0x1e 0x4 + 0x0 0x1f 0x4>; + }; + + csw: csw@7e200000 { + compatible = "apm,xgene-csw", "syscon"; + reg = <0x0 0x7e200000 0x0 0x1000>; + }; + + mcba: mcba@7e700000 { + compatible = "apm,xgene-mcb", "syscon"; + reg = <0x0 0x7e700000 0x0 0x1000>; + }; + + mcbb: mcbb@7e720000 { + compatible = "apm,xgene-mcb", "syscon"; + reg = <0x0 0x7e720000 0x0 0x1000>; + }; + + efuse: efuse@1054a000 { + compatible = "apm,xgene-efuse", "syscon"; + reg = <0x0 0x1054a000 0x0 0x20>; + }; + + edac@78800000 { + compatible = "apm,xgene-edac"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + regmap-csw = <&csw>; + regmap-mcba = <&mcba>; + regmap-mcbb = <&mcbb>; + regmap-efuse = <&efuse>; + reg = <0x0 0x78800000 0x0 0x100>; + interrupts = <0x0 0x20 0x4>, + <0x0 0x21 0x4>, + <0x0 0x27 0x4>; + + edacmc@7e800000 { + compatible = "apm,xgene-edac-mc"; + reg = <0x0 0x7e800000 0x0 0x1000>; + memory-controller = <0>; + }; + + edacmc@7e840000 { + compatible = "apm,xgene-edac-mc"; + reg = <0x0 0x7e840000 0x0 0x1000>; + memory-controller = <1>; + }; + + edacmc@7e880000 { + compatible = "apm,xgene-edac-mc"; + reg = <0x0 0x7e880000 0x0 0x1000>; + memory-controller = <2>; + }; + + edacmc@7e8c0000 { + compatible = "apm,xgene-edac-mc"; + reg = <0x0 0x7e8c0000 0x0 0x1000>; + memory-controller = <3>; + }; + + edacpmd@7c000000 { + compatible = "apm,xgene-edac-pmd"; + reg = <0x0 0x7c000000 0x0 0x200000>; + pmd-controller = <0>; + }; + + edacpmd@7c200000 { + compatible = "apm,xgene-edac-pmd"; + reg = <0x0 0x7c200000 0x0 0x200000>; + pmd-controller = <1>; + }; + + edacpmd@7c400000 { + compatible = "apm,xgene-edac-pmd"; + reg = <0x0 0x7c400000 0x0 0x200000>; + pmd-controller = <2>; + }; + + edacpmd@7c600000 { + compatible = "apm,xgene-edac-pmd"; + reg = <0x0 0x7c600000 0x0 0x200000>; + pmd-controller = <3>; + }; + }; + pcie0: pcie@1f2b0000 { status = "disabled"; device_type = "pci"; @@ -395,6 +500,7 @@ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; dma-coherent; clocks = <&pcie0clk 0>; + msi-parent = <&msi>; }; pcie1: pcie@1f2c0000 { @@ -418,6 +524,7 @@ 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>; dma-coherent; clocks = <&pcie1clk 0>; + msi-parent = <&msi>; }; pcie2: pcie@1f2d0000 { @@ -441,6 +548,7 @@ 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>; dma-coherent; clocks = <&pcie2clk 0>; + msi-parent = <&msi>; }; pcie3: pcie@1f500000 { @@ -464,6 +572,7 @@ 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>; dma-coherent; clocks = <&pcie3clk 0>; + msi-parent = <&msi>; }; pcie4: pcie@1f510000 { @@ -487,6 +596,7 @@ 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>; dma-coherent; clocks = <&pcie4clk 0>; + msi-parent = <&msi>; }; serial0: serial@1c020000 { @@ -607,6 +717,19 @@ phy-names = "sata-phy"; }; + sbgpio: sbgpio@17001000{ + compatible = "apm,xgene-gpio-sb"; + reg = <0x0 0x17001000 0x0 0x400>; + #gpio-cells = <2>; + gpio-controller; + interrupts = <0x0 0x28 0x1>, + <0x0 0x29 0x1>, + <0x0 0x2a 0x1>, + <0x0 0x2b 0x1>, + <0x0 0x2c 0x1>, + <0x0 0x2d 0x1>; + }; + rtc: rtc@10510000 { compatible = "apm,xgene-rtc"; reg = <0x0 0x10510000 0x0 0x400>; diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index 301a0da..c5c98b9 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,5 +1,5 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi new file mode 100644 index 0000000..e3ee960 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -0,0 +1,154 @@ + /* + * Devices shared by all Juno boards + */ + + memtimer: timer@2a810000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x2a810000 0x0 0x10000>; + clock-frequency = <50000000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + frame@2a830000 { + frame-number = <1>; + interrupts = <0 60 4>; + reg = <0x0 0x2a830000 0x0 0x10000>; + }; + }; + + gic: interrupt-controller@2c010000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + reg = <0x0 0x2c010000 0 0x1000>, + <0x0 0x2c02f000 0 0x2000>, + <0x0 0x2c04f000 0 0x2000>, + <0x0 0x2c06f000 0 0x2000>; + #address-cells = <2>; + #interrupt-cells = <3>; + #size-cells = <2>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + ranges = <0 0 0 0x2c1c0000 0 0x40000>; + v2m_0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0 0 0x1000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /include/ "juno-clocks.dtsi" + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x7ff00000 0 0x1000>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_faxiclk>; + clock-names = "apb_pclk"; + }; + + soc_uart0: uart@7ff80000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x7ff80000 0x0 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_uartclk>, <&soc_refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + i2c@7ffa0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x7ffa0000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <500>; + clocks = <&soc_smc50mhz>; + + dvi0: dvi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + }; + + dvi1: dvi-transmitter@71 { + compatible = "nxp,tda998x"; + reg = <0x71>; + }; + }; + + ohci@7ffb0000 { + compatible = "generic-ohci"; + reg = <0x0 0x7ffb0000 0x0 0x10000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_usb48mhz>; + }; + + ehci@7ffc0000 { + compatible = "generic-ehci"; + reg = <0x0 0x7ffc0000 0x0 0x10000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_usb48mhz>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + memory@80000000 { + device_type = "memory"; + /* last 16MB of the first memory area is reserved for secure world use by firmware */ + reg = <0x00000000 0x80000000 0x0 0x7f000000>, + <0x00000008 0x80000000 0x1 0x80000000>; + }; + + smb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 15>; + interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>; + + /include/ "juno-motherboard.dtsi" + }; diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi index c9b89ef..25352ed 100644 --- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -36,9 +36,9 @@ clock-output-names = "apb_pclk"; }; - soc_faxiclk: refclk533mhz { + soc_faxiclk: refclk400mhz { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <533000000>; + clock-frequency = <400000000>; clock-output-names = "faxi_clk"; }; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 351c95b..021e0f4 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -54,6 +54,55 @@ regulator-always-on; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <116>; + label = "POWER"; + gpios = <&iofpga_gpio0 0 0x4>; + }; + button@2 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <102>; + label = "HOME"; + gpios = <&iofpga_gpio0 1 0x4>; + }; + button@3 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <152>; + label = "RLOCK"; + gpios = <&iofpga_gpio0 2 0x4>; + }; + button@4 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <115>; + label = "VOL+"; + gpios = <&iofpga_gpio0 3 0x4>; + }; + button@5 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <114>; + label = "VOL-"; + gpios = <&iofpga_gpio0 4 0x4>; + }; + button@6 { + debounce_interval = <50>; + wakeup = <1>; + linux,code = <99>; + label = "NMI"; + gpios = <&iofpga_gpio0 5 0x4>; + }; + }; + ethernet@2,00000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x00000000 0x10000>; @@ -89,6 +138,74 @@ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; }; + apbregs@010000 { + compatible = "syscon", "simple-mfd"; + reg = <0x010000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "vexpress:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "vexpress:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "vexpress:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "vexpress:3"; + linux,default-trigger = "cpu1"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "vexpress:4"; + linux,default-trigger = "cpu2"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "vexpress:5"; + linux,default-trigger = "cpu3"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "vexpress:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "vexpress:7"; + default-state = "off"; + }; + }; + mmci@050000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; @@ -148,5 +265,17 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; }; + + iofpga_gpio0: gpio@1d0000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x1d0000 0x1000>; + interrupts = <6>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts new file mode 100644 index 0000000..c627511 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -0,0 +1,116 @@ +/* + * ARM Ltd. Juno Platform + * + * Copyright (c) 2015 ARM Ltd. + * + * This file is licensed under a dual GPLv2 or BSD license. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "ARM Juno development board (r1)"; + compatible = "arm,juno-r1", "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &soc_uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + A57_0: cpu@0 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + }; + + A57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A57_L2: l2-cache0 { + compatible = "cache"; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A57_0>, + <&A57_1>, + <&A53_0>, + <&A53_1>, + <&A53_2>, + <&A53_3>; + }; + + #include "juno-base.dtsi" + +}; + +&memtimer { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 5e9110a..d7cbdd4 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -91,33 +91,6 @@ }; }; - memory@80000000 { - device_type = "memory"; - /* last 16MB of the first memory area is reserved for secure world use by firmware */ - reg = <0x00000000 0x80000000 0x0 0x7f000000>, - <0x00000008 0x80000000 0x1 0x80000000>; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,gic-400", "arm,cortex-a15-gic"; - reg = <0x0 0x2c010000 0 0x1000>, - <0x0 0x2c02f000 0 0x2000>, - <0x0 0x2c04f000 0 0x2000>, - <0x0 0x2c06f000 0 0x2000>; - #address-cells = <0>; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; - }; - pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, @@ -134,105 +107,5 @@ <&A53_3>; }; - /include/ "juno-clocks.dtsi" - - dma@7ff00000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0x7ff00000 0 0x1000>; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_faxiclk>; - clock-names = "apb_pclk"; - }; - - soc_uart0: uart@7ff80000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0x7ff80000 0x0 0x1000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_uartclk>, <&soc_refclk100mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - i2c@7ffa0000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x7ffa0000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <400000>; - i2c-sda-hold-time-ns = <500>; - clocks = <&soc_smc50mhz>; - - dvi0: dvi-transmitter@70 { - compatible = "nxp,tda998x"; - reg = <0x70>; - }; - - dvi1: dvi-transmitter@71 { - compatible = "nxp,tda998x"; - reg = <0x71>; - }; - }; - - ohci@7ffb0000 { - compatible = "generic-ohci"; - reg = <0x0 0x7ffb0000 0x0 0x10000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_usb48mhz>; - }; - - ehci@7ffc0000 { - compatible = "generic-ehci"; - reg = <0x0 0x7ffc0000 0x0 0x10000>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_usb48mhz>; - }; - - memory-controller@7ffd0000 { - compatible = "arm,pl354", "arm,primecell"; - reg = <0 0x7ffd0000 0 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_smc50mhz>; - clock-names = "apb_pclk"; - }; - - smb { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 15>; - interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>; - - /include/ "juno-motherboard.dtsi" - }; + #include "juno-base.dtsi" }; diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile new file mode 100644 index 0000000..fa81a6e --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts new file mode 100644 index 0000000..e36a539 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -0,0 +1,31 @@ +/* + * dts file for Hisilicon HiKey Development Board + * + * Copyright (C) 2015, Hisilicon Ltd. + * + */ + +/dts-v1/; + +/*Reserved 1MB memory for MCU*/ +/memreserve/ 0x05e00000 0x00100000; + +#include "hi6220.dtsi" + +/ { + model = "HiKey Development Board"; + compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi new file mode 100644 index 0000000..3f03380 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -0,0 +1,171 @@ +/* + * dts file for Hisilicon Hi6220 SoC + * + * Copyright (C) 2015, Hisilicon Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "hisilicon,hi6220"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x101>; + enable-method = "psci"; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x102>; + enable-method = "psci"; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x103>; + enable-method = "psci"; + }; + }; + + gic: interrupt-controller@f6801000 { + compatible = "arm,gic-400"; + reg = <0x0 0xf6801000 0 0x1000>, /* GICD */ + <0x0 0xf6802000 0 0x2000>, /* GICC */ + <0x0 0xf6804000 0 0x2000>, /* GICH */ + <0x0 0xf6806000 0 0x2000>; /* GICV */ + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ao_ctrl: ao_ctrl@f7800000 { + compatible = "hisilicon,hi6220-aoctrl", "syscon"; + reg = <0x0 0xf7800000 0x0 0x2000>; + #clock-cells = <1>; + }; + + sys_ctrl: sys_ctrl@f7030000 { + compatible = "hisilicon,hi6220-sysctrl", "syscon"; + reg = <0x0 0xf7030000 0x0 0x2000>; + #clock-cells = <1>; + }; + + media_ctrl: media_ctrl@f4410000 { + compatible = "hisilicon,hi6220-mediactrl", "syscon"; + reg = <0x0 0xf4410000 0x0 0x1000>; + #clock-cells = <1>; + }; + + pm_ctrl: pm_ctrl@f7032000 { + compatible = "hisilicon,hi6220-pmctrl", "syscon"; + reg = <0x0 0xf7032000 0x0 0x1000>; + #clock-cells = <1>; + }; + + uart0: uart@f8015000 { /* console */ + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf8015000 0x0 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ao_ctrl 36>, <&ao_ctrl 36>; + clock-names = "uartclk", "apb_pclk"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 43d5401..d0ab012 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -16,7 +16,8 @@ #include "mt8173.dtsi" / { - model = "mediatek,mt8173-evb"; + model = "MediaTek MT8173 evaluation board"; + compatible = "mediatek,mt8173-evb", "mediatek,mt8173"; aliases { serial0 = &uart0; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 924fdb6..27237a1 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -91,13 +91,13 @@ compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; soc { @@ -106,14 +106,13 @@ compatible = "simple-bus"; ranges; - syscfg_pctl_a: syscfg_pctl_a@10005000 { - compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon"; - reg = <0 0x10005000 0 0x1000>; - }; - - pio: pinctrl@0x10005000 { + /* + * Pinctrl access register at 0x10005000 through regmap. + * Register 0x1000b000 is used by EINT. + */ + pio: pinctrl@10005000 { compatible = "mediatek,mt8173-pinctrl"; - reg = <0 0x1000B000 0 0x1000>; + reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>; pins-are-numbered; gpio-controller; @@ -121,13 +120,18 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + }; + + syscfg_pctl_a: syscfg_pctl_a@10005000 { + compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; }; sysirq: intpol-controller@10200620 { compatible = "mediatek,mt8173-sysirq", - "mediatek,mt6577-sysirq"; + "mediatek,mt6577-sysirq"; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; @@ -149,7 +153,7 @@ uart0: serial@11002000 { compatible = "mediatek,mt8173-uart", - "mediatek,mt6577-uart"; + "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>; clocks = <&uart_clk>; @@ -158,7 +162,7 @@ uart1: serial@11003000 { compatible = "mediatek,mt8173-uart", - "mediatek,mt6577-uart"; + "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; clocks = <&uart_clk>; @@ -167,7 +171,7 @@ uart2: serial@11004000 { compatible = "mediatek,mt8173-uart", - "mediatek,mt6577-uart"; + "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; clocks = <&uart_clk>; @@ -176,13 +180,12 @@ uart3: serial@11005000 { compatible = "mediatek,mt8173-uart", - "mediatek,mt6577-uart"; + "mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; clocks = <&uart_clk>; status = "disabled"; }; }; - }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi new file mode 100644 index 0000000..535532b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -0,0 +1,30 @@ +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +&pm8916_gpios { + + pinctrl-names = "default"; + pinctrl-0 = <&pm8916_gpios_default>; + + pm8916_gpios_default: default { + usb_hub_reset_pm { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + }; + usb_sw_sel_pm { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + input-disable; + }; + usr_led_3_ctrl { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + }; + usr_led_4_ctrl { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi new file mode 100644 index 0000000..5f7023f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi @@ -0,0 +1,21 @@ + +#include <dt-bindings/gpio/gpio.h> + +&msmgpio { + + pinctrl-names = "default"; + pinctrl-0 = <&soc_gpios_default>; + + soc_gpios_default: default { + usr_led_1_ctrl_default: usr_led_1_ctrl_default { + pins = "gpio21"; + function = "gpio"; + output-low; + }; + usr_led_2_ctrl_default: usr_led_2_ctrl_default { + pins = "gpio120"; + function = "gpio"; + output-low; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 703a4f1..98abece 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -12,6 +12,9 @@ */ #include "msm8916.dtsi" +#include "pm8916.dtsi" +#include "apq8016-sbc-soc-pins.dtsi" +#include "apq8016-sbc-pmic-pins.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi index bea871b..a1aa0b2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi @@ -12,6 +12,7 @@ */ #include "msm8916.dtsi" +#include "pm8916.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index f212b83..0f49ebd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -77,7 +77,12 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - pinctrl@1000000 { + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x4ab000 0x4>; + }; + + msmgpio: pinctrl@1000000 { compatible = "qcom,msm8916-pinctrl"; reg = <0x1000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; @@ -192,5 +197,23 @@ status = "disabled"; }; }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x200f000 0x001000>, + <0x2400000 0x400000>, + <0x2c00000 0x400000>, + <0x3800000 0x200000>, + <0x200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi new file mode 100644 index 0000000..b222ece --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -0,0 +1,99 @@ +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + usid0: pm8916@0 { + compatible = "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000 0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + + pm8916_gpios: gpios@c000 { + compatible = "qcom,pm8916-gpio"; + reg = <0xc000 0x400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>; + }; + + pm8916_mpps: mpps@a000 { + compatible = "qcom,pm8916-mpp"; + reg = <0xa000 0x400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>; + }; + + pm8916_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8916_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8916_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + usb_in { + reg = <VADC_USBIN>; + qcom,pre-scaling = <1 10>; + }; + vph_pwr { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 3>; + }; + die_temp { + reg = <VADC_DIE_TEMP>; + }; + ref_625mv { + reg = <VADC_REF_625MV>; + }; + ref_1250v { + reg = <VADC_REF_1250MV>; + }; + ref_gnd { + reg = <VADC_GND_REF>; + }; + ref_vdd { + reg = <VADC_VDD_VADC>; + }; + }; + }; + + usid1: pm8916@1 { + compatible = "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/skeleton.dtsi b/arch/arm64/boot/dts/skeleton.dtsi deleted file mode 100644 index 38ead82..0000000 --- a/arch/arm64/boot/dts/skeleton.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -/* - * Skeleton device tree; the bare minimum needed to boot; just include and - * add a compatible value. The bootloader will typically populate the memory - * node. - */ - -/ { - #address-cells = <2>; - #size-cells = <1>; - chosen { }; - aliases { }; - memory { device_type = "memory"; reg = <0 0 0>; }; -}; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index daefbf0..f38c94f 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -33,6 +33,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_ARCH_EXYNOS7=y CONFIG_ARCH_FSL_LS2085A=y +CONFIG_ARCH_HISI=y CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_TEGRA=y @@ -94,6 +95,7 @@ CONFIG_SMC91X=y CONFIG_SMSC911X=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 @@ -138,6 +140,12 @@ CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SPI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_SYSCON=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_EFI=y CONFIG_RTC_DRV_XGENE=y diff --git a/arch/arm64/crypto/aes-ce-ccm-glue.c b/arch/arm64/crypto/aes-ce-ccm-glue.c index 6c348df..3303e8a 100644 --- a/arch/arm64/crypto/aes-ce-ccm-glue.c +++ b/arch/arm64/crypto/aes-ce-ccm-glue.c @@ -13,7 +13,7 @@ #include <crypto/aes.h> #include <crypto/algapi.h> #include <crypto/scatterwalk.h> -#include <linux/crypto.h> +#include <crypto/internal/aead.h> #include <linux/module.h> #include "aes-ce-setkey.h" diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index 55103e5..b112a39 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -35,7 +35,6 @@ generic-y += poll.h generic-y += preempt.h generic-y += resource.h generic-y += rwsem.h -generic-y += scatterlist.h generic-y += sections.h generic-y += segment.h generic-y += sembuf.h diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index 71f19c4..0fa47c4 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -114,7 +114,7 @@ do { \ #define read_barrier_depends() do { } while(0) #define smp_read_barrier_depends() do { } while(0) -#define set_mb(var, value) do { var = value; smp_mb(); } while (0) +#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0) #define nop() asm volatile("nop"); #define smp_mb__before_atomic() smp_mb() diff --git a/arch/arm64/include/asm/dma-mapping.h b/arch/arm64/include/asm/dma-mapping.h index 9437e3d..f0d6d0b 100644 --- a/arch/arm64/include/asm/dma-mapping.h +++ b/arch/arm64/include/asm/dma-mapping.h @@ -18,6 +18,7 @@ #ifdef __KERNEL__ +#include <linux/acpi.h> #include <linux/types.h> #include <linux/vmalloc.h> @@ -28,13 +29,23 @@ #define DMA_ERROR_CODE (~(dma_addr_t)0) extern struct dma_map_ops *dma_ops; +extern struct dma_map_ops dummy_dma_ops; static inline struct dma_map_ops *__generic_dma_ops(struct device *dev) { - if (unlikely(!dev) || !dev->archdata.dma_ops) + if (unlikely(!dev)) return dma_ops; - else + else if (dev->archdata.dma_ops) return dev->archdata.dma_ops; + else if (acpi_disabled) + return dma_ops; + + /* + * When ACPI is enabled, if arch_set_dma_ops is not called, + * we will disable device DMA capability by setting it + * to dummy_dma_ops. + */ + return &dummy_dma_ops; } static inline struct dma_map_ops *get_dma_ops(struct device *dev) @@ -48,6 +59,9 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev) static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, struct iommu_ops *iommu, bool coherent) { + if (!acpi_disabled && !dev->archdata.dma_ops) + dev->archdata.dma_ops = dma_ops; + dev->archdata.dma_coherent = coherent; } #define arch_setup_dma_ops arch_setup_dma_ops diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h index 5f750dc..74069b3 100644 --- a/arch/arm64/include/asm/futex.h +++ b/arch/arm64/include/asm/futex.h @@ -58,7 +58,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; - pagefault_disable(); /* implies preempt_disable() */ + pagefault_disable(); switch (op) { case FUTEX_OP_SET: @@ -85,7 +85,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) ret = -ENOSYS; } - pagefault_enable(); /* subsumes preempt_enable() */ + pagefault_enable(); if (!ret) { switch (cmp) { diff --git a/arch/arm64/include/asm/hugetlb.h b/arch/arm64/include/asm/hugetlb.h index 5b7ca8a..2fd9b14 100644 --- a/arch/arm64/include/asm/hugetlb.h +++ b/arch/arm64/include/asm/hugetlb.h @@ -86,10 +86,6 @@ static inline int prepare_hugepage_range(struct file *file, return 0; } -static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) -{ -} - static inline int huge_pte_none(pte_t pte) { return pte_none(pte); @@ -100,15 +96,6 @@ static inline pte_t huge_pte_wrprotect(pte_t pte) return pte_wrprotect(pte); } -static inline int arch_prepare_hugepage(struct page *page) -{ - return 0; -} - -static inline void arch_release_hugepage(struct page *page) -{ -} - static inline void arch_clear_hugepage_flags(struct page *page) { clear_bit(PG_dcache_clean, &page->flags); diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index cb18715..44be1e0 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -170,6 +170,7 @@ extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size); #define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define ioremap_nocache(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC)) +#define ioremap_wt(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define iounmap __iounmap /* diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index d13bc5e..3c5fe68 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -27,7 +27,7 @@ #define MPIDR_EL1 1 /* MultiProcessor Affinity Register */ #define CSSELR_EL1 2 /* Cache Size Selection Register */ #define SCTLR_EL1 3 /* System Control Register */ -#define ACTLR_EL1 4 /* Auxilliary Control Register */ +#define ACTLR_EL1 4 /* Auxiliary Control Register */ #define CPACR_EL1 5 /* Coprocessor Access Control */ #define TTBR0_EL1 6 /* Translation Table Base Register 0 */ #define TTBR1_EL1 7 /* Translation Table Base Register 1 */ diff --git a/arch/arm64/include/asm/mm-arch-hooks.h b/arch/arm64/include/asm/mm-arch-hooks.h new file mode 100644 index 0000000..562b655 --- /dev/null +++ b/arch/arm64/include/asm/mm-arch-hooks.h @@ -0,0 +1,15 @@ +/* + * Architecture specific mm hooks + * + * Copyright (C) 2015, IBM Corporation + * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASM_ARM64_MM_ARCH_HOOKS_H +#define _ASM_ARM64_MM_ARCH_HOOKS_H + +#endif /* _ASM_ARM64_MM_ARCH_HOOKS_H */ diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h index 7ebcd31..225ec35 100644 --- a/arch/arm64/include/asm/topology.h +++ b/arch/arm64/include/asm/topology.h @@ -18,7 +18,7 @@ extern struct cpu_topology cpu_topology[NR_CPUS]; #define topology_physical_package_id(cpu) (cpu_topology[cpu].cluster_id) #define topology_core_id(cpu) (cpu_topology[cpu].core_id) #define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling) -#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) +#define topology_sibling_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) void init_cpu_topology(void); void store_cpu_topology(unsigned int cpuid); diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c index ab21e0d..9d4aa18 100644 --- a/arch/arm64/kernel/efi.c +++ b/arch/arm64/kernel/efi.c @@ -158,6 +158,7 @@ static __init int is_reserve_region(efi_memory_desc_t *md) case EFI_BOOT_SERVICES_CODE: case EFI_BOOT_SERVICES_DATA: case EFI_CONVENTIONAL_MEMORY: + case EFI_PERSISTENT_MEMORY: return 0; default: break; diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index ffd3970..f3067d4 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -64,6 +64,7 @@ #include <asm/psci.h> #include <asm/efi.h> #include <asm/virt.h> +#include <asm/xen/hypervisor.h> unsigned long elf_hwcap __read_mostly; EXPORT_SYMBOL_GPL(elf_hwcap); @@ -401,6 +402,7 @@ void __init setup_arch(char **cmdline_p) } else { psci_acpi_init(); } + xen_early_init(); cpu_read_bootcpu_ops(); #ifdef CONFIG_SMP diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig index 5105e29..bfffe8f 100644 --- a/arch/arm64/kvm/Kconfig +++ b/arch/arm64/kvm/Kconfig @@ -28,6 +28,7 @@ config KVM select KVM_ARM_HOST select KVM_GENERIC_DIRTYLOG_READ_PROTECT select SRCU + select KVM_VFIO select HAVE_KVM_EVENTFD select HAVE_KVM_IRQFD ---help--- diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile index d5904f8..f90f4aa 100644 --- a/arch/arm64/kvm/Makefile +++ b/arch/arm64/kvm/Makefile @@ -11,7 +11,7 @@ ARM=../../../arch/arm/kvm obj-$(CONFIG_KVM_ARM_HOST) += kvm.o -kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o kvm-$(CONFIG_KVM_ARM_HOST) += $(ARM)/arm.o $(ARM)/mmu.o $(ARM)/mmio.o kvm-$(CONFIG_KVM_ARM_HOST) += $(ARM)/psci.o $(ARM)/perf.o diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S index f1f6d90..17a8fb1 100644 --- a/arch/arm64/kvm/hyp.S +++ b/arch/arm64/kvm/hyp.S @@ -52,8 +52,8 @@ stp x29, lr, [x3, #80] mrs x19, sp_el0 - mrs x20, elr_el2 // EL1 PC - mrs x21, spsr_el2 // EL1 pstate + mrs x20, elr_el2 // pc before entering el2 + mrs x21, spsr_el2 // pstate before entering el2 stp x19, x20, [x3, #96] str x21, [x3, #112] @@ -84,8 +84,8 @@ ldr x21, [x3, #16] msr sp_el0, x19 - msr elr_el2, x20 // EL1 PC - msr spsr_el2, x21 // EL1 pstate + msr elr_el2, x20 // pc on return from el2 + msr spsr_el2, x21 // pstate on return from el2 add x3, x2, #CPU_XREG_OFFSET(19) ldp x19, x20, [x3] diff --git a/arch/arm64/kvm/vgic-v2-switch.S b/arch/arm64/kvm/vgic-v2-switch.S index f002fe1..3f00071 100644 --- a/arch/arm64/kvm/vgic-v2-switch.S +++ b/arch/arm64/kvm/vgic-v2-switch.S @@ -47,7 +47,6 @@ __save_vgic_v2_state: add x3, x0, #VCPU_VGIC_CPU /* Save all interesting registers */ - ldr w4, [x2, #GICH_HCR] ldr w5, [x2, #GICH_VMCR] ldr w6, [x2, #GICH_MISR] ldr w7, [x2, #GICH_EISR0] @@ -55,7 +54,6 @@ __save_vgic_v2_state: ldr w9, [x2, #GICH_ELRSR0] ldr w10, [x2, #GICH_ELRSR1] ldr w11, [x2, #GICH_APR] -CPU_BE( rev w4, w4 ) CPU_BE( rev w5, w5 ) CPU_BE( rev w6, w6 ) CPU_BE( rev w7, w7 ) @@ -64,7 +62,6 @@ CPU_BE( rev w9, w9 ) CPU_BE( rev w10, w10 ) CPU_BE( rev w11, w11 ) - str w4, [x3, #VGIC_V2_CPU_HCR] str w5, [x3, #VGIC_V2_CPU_VMCR] str w6, [x3, #VGIC_V2_CPU_MISR] CPU_LE( str w7, [x3, #VGIC_V2_CPU_EISR] ) diff --git a/arch/arm64/kvm/vgic-v3-switch.S b/arch/arm64/kvm/vgic-v3-switch.S index 617a012..3c20730 100644 --- a/arch/arm64/kvm/vgic-v3-switch.S +++ b/arch/arm64/kvm/vgic-v3-switch.S @@ -48,13 +48,11 @@ dsb st // Save all interesting registers - mrs_s x4, ICH_HCR_EL2 mrs_s x5, ICH_VMCR_EL2 mrs_s x6, ICH_MISR_EL2 mrs_s x7, ICH_EISR_EL2 mrs_s x8, ICH_ELSR_EL2 - str w4, [x3, #VGIC_V3_CPU_HCR] str w5, [x3, #VGIC_V3_CPU_VMCR] str w6, [x3, #VGIC_V3_CPU_MISR] str w7, [x3, #VGIC_V3_CPU_EISR] diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index b0bd4e5..d16a1ce 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -414,6 +414,98 @@ out: return -ENOMEM; } +/******************************************** + * The following APIs are for dummy DMA ops * + ********************************************/ + +static void *__dummy_alloc(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flags, + struct dma_attrs *attrs) +{ + return NULL; +} + +static void __dummy_free(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) +{ +} + +static int __dummy_mmap(struct device *dev, + struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size, + struct dma_attrs *attrs) +{ + return -ENXIO; +} + +static dma_addr_t __dummy_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + return DMA_ERROR_CODE; +} + +static void __dummy_unmap_page(struct device *dev, dma_addr_t dev_addr, + size_t size, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ +} + +static int __dummy_map_sg(struct device *dev, struct scatterlist *sgl, + int nelems, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + return 0; +} + +static void __dummy_unmap_sg(struct device *dev, + struct scatterlist *sgl, int nelems, + enum dma_data_direction dir, + struct dma_attrs *attrs) +{ +} + +static void __dummy_sync_single(struct device *dev, + dma_addr_t dev_addr, size_t size, + enum dma_data_direction dir) +{ +} + +static void __dummy_sync_sg(struct device *dev, + struct scatterlist *sgl, int nelems, + enum dma_data_direction dir) +{ +} + +static int __dummy_mapping_error(struct device *hwdev, dma_addr_t dma_addr) +{ + return 1; +} + +static int __dummy_dma_supported(struct device *hwdev, u64 mask) +{ + return 0; +} + +struct dma_map_ops dummy_dma_ops = { + .alloc = __dummy_alloc, + .free = __dummy_free, + .mmap = __dummy_mmap, + .map_page = __dummy_map_page, + .unmap_page = __dummy_unmap_page, + .map_sg = __dummy_map_sg, + .unmap_sg = __dummy_unmap_sg, + .sync_single_for_cpu = __dummy_sync_single, + .sync_single_for_device = __dummy_sync_single, + .sync_sg_for_cpu = __dummy_sync_sg, + .sync_sg_for_device = __dummy_sync_sg, + .mapping_error = __dummy_mapping_error, + .dma_supported = __dummy_dma_supported, +}; +EXPORT_SYMBOL(dummy_dma_ops); + static int __init arm64_dma_init(void) { int ret; diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index ffa36e2..94d98cd 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -210,7 +210,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, * If we're in an interrupt or have no user context, we must not take * the fault. */ - if (in_atomic() || !mm) + if (faulthandler_disabled() || !mm) goto no_context; if (user_mode(regs)) diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index 0eeb4f09..831ec53 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -31,13 +31,6 @@ #include <asm/tlbflush.h> #include <asm/pgalloc.h> -#ifndef CONFIG_ARCH_WANT_HUGE_PMD_SHARE -int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep) -{ - return 0; -} -#endif - int pmd_huge(pmd_t pmd) { return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT); |