summaryrefslogtreecommitdiff
path: root/arch/arm64
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64')
-rw-r--r--arch/arm64/Kconfig1
-rw-r--r--arch/arm64/boot/dts/arm/Makefile2
-rw-r--r--arch/arm64/boot/dts/arm/juno-base.dtsi154
-rw-r--r--arch/arm64/boot/dts/arm/juno-clocks.dtsi4
-rw-r--r--arch/arm64/boot/dts/arm/juno-r1.dts116
-rw-r--r--arch/arm64/boot/dts/arm/juno.dts129
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8173.dtsi41
-rw-r--r--arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi30
-rw-r--r--arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi21
-rw-r--r--arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi3
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi25
-rw-r--r--arch/arm64/boot/dts/qcom/pm8916.dtsi99
-rw-r--r--arch/arm64/include/asm/barrier.h16
-rw-r--r--arch/arm64/kernel/perf_event.c9
-rw-r--r--arch/arm64/mm/dma-mapping.c9
16 files changed, 502 insertions, 158 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 4269dba..7796af4 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -31,6 +31,7 @@ config ARM64
select GENERIC_EARLY_IOREMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
+ select GENERIC_IRQ_SHOW_LEVEL
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index 301a0da..c5c98b9 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
new file mode 100644
index 0000000..e3ee960
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -0,0 +1,154 @@
+ /*
+ * Devices shared by all Juno boards
+ */
+
+ memtimer: timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ clock-frequency = <50000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ frame@2a830000 {
+ frame-number = <1>;
+ interrupts = <0 60 4>;
+ reg = <0x0 0x2a830000 0x0 0x10000>;
+ };
+ };
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ reg = <0x0 0x2c010000 0 0x1000>,
+ <0x0 0x2c02f000 0 0x2000>,
+ <0x0 0x2c04f000 0 0x2000>,
+ <0x0 0x2c06f000 0 0x2000>;
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ ranges = <0 0 0 0x2c1c0000 0 0x40000>;
+ v2m_0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0 0 0 0x1000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ /include/ "juno-clocks.dtsi"
+
+ dma@7ff00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0x7ff00000 0 0x1000>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_faxiclk>;
+ clock-names = "apb_pclk";
+ };
+
+ soc_uart0: uart@7ff80000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x7ff80000 0x0 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ i2c@7ffa0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x7ffa0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <500>;
+ clocks = <&soc_smc50mhz>;
+
+ dvi0: dvi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ };
+
+ dvi1: dvi-transmitter@71 {
+ compatible = "nxp,tda998x";
+ reg = <0x71>;
+ };
+ };
+
+ ohci@7ffb0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0x7ffb0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ ehci@7ffc0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0x7ffc0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ memory-controller@7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0 0x7ffd0000 0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* last 16MB of the first memory area is reserved for secure world use by firmware */
+ reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+ <0x00000008 0x80000000 0x1 0x80000000>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 15>;
+ interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "juno-motherboard.dtsi"
+ };
diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
index c9b89ef..25352ed 100644
--- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -36,9 +36,9 @@
clock-output-names = "apb_pclk";
};
- soc_faxiclk: refclk533mhz {
+ soc_faxiclk: refclk400mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <533000000>;
+ clock-frequency = <400000000>;
clock-output-names = "faxi_clk";
};
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
new file mode 100644
index 0000000..c627511
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -0,0 +1,116 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "ARM Juno development board (r1)";
+ compatible = "arm,juno-r1", "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ };
+
+ A57_1: cpu@1 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ };
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x101>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x102>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x103>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A57_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A53_L2: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>,
+ <&A53_0>,
+ <&A53_1>,
+ <&A53_2>,
+ <&A53_3>;
+ };
+
+ #include "juno-base.dtsi"
+
+};
+
+&memtimer {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index 5e9110a..d7cbdd4 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -91,33 +91,6 @@
};
};
- memory@80000000 {
- device_type = "memory";
- /* last 16MB of the first memory area is reserved for secure world use by firmware */
- reg = <0x00000000 0x80000000 0x0 0x7f000000>,
- <0x00000008 0x80000000 0x1 0x80000000>;
- };
-
- gic: interrupt-controller@2c001000 {
- compatible = "arm,gic-400", "arm,cortex-a15-gic";
- reg = <0x0 0x2c010000 0 0x1000>,
- <0x0 0x2c02f000 0 0x2000>,
- <0x0 0x2c04f000 0 0x2000>,
- <0x0 0x2c06f000 0 0x2000>;
- #address-cells = <0>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
@@ -134,105 +107,5 @@
<&A53_3>;
};
- /include/ "juno-clocks.dtsi"
-
- dma@7ff00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0x7ff00000 0 0x1000>;
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_faxiclk>;
- clock-names = "apb_pclk";
- };
-
- soc_uart0: uart@7ff80000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0x7ff80000 0x0 0x1000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- i2c@7ffa0000 {
- compatible = "snps,designware-i2c";
- reg = <0x0 0x7ffa0000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <400000>;
- i2c-sda-hold-time-ns = <500>;
- clocks = <&soc_smc50mhz>;
-
- dvi0: dvi-transmitter@70 {
- compatible = "nxp,tda998x";
- reg = <0x70>;
- };
-
- dvi1: dvi-transmitter@71 {
- compatible = "nxp,tda998x";
- reg = <0x71>;
- };
- };
-
- ohci@7ffb0000 {
- compatible = "generic-ohci";
- reg = <0x0 0x7ffb0000 0x0 0x10000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- ehci@7ffc0000 {
- compatible = "generic-ehci";
- reg = <0x0 0x7ffc0000 0x0 0x10000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- memory-controller@7ffd0000 {
- compatible = "arm,pl354", "arm,primecell";
- reg = <0 0x7ffd0000 0 0x1000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- };
-
- smb {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 15>;
- interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
-
- /include/ "juno-motherboard.dtsi"
- };
+ #include "juno-base.dtsi"
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 924fdb6..27237a1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -91,13 +91,13 @@
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
soc {
@@ -106,14 +106,13 @@
compatible = "simple-bus";
ranges;
- syscfg_pctl_a: syscfg_pctl_a@10005000 {
- compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
- reg = <0 0x10005000 0 0x1000>;
- };
-
- pio: pinctrl@0x10005000 {
+ /*
+ * Pinctrl access register at 0x10005000 through regmap.
+ * Register 0x1000b000 is used by EINT.
+ */
+ pio: pinctrl@10005000 {
compatible = "mediatek,mt8173-pinctrl";
- reg = <0 0x1000B000 0 0x1000>;
+ reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>;
pins-are-numbered;
gpio-controller;
@@ -121,13 +120,18 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ syscfg_pctl_a: syscfg_pctl_a@10005000 {
+ compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
};
sysirq: intpol-controller@10200620 {
compatible = "mediatek,mt8173-sysirq",
- "mediatek,mt6577-sysirq";
+ "mediatek,mt6577-sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
@@ -149,7 +153,7 @@
uart0: serial@11002000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
clocks = <&uart_clk>;
@@ -158,7 +162,7 @@
uart1: serial@11003000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
clocks = <&uart_clk>;
@@ -167,7 +171,7 @@
uart2: serial@11004000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
clocks = <&uart_clk>;
@@ -176,13 +180,12 @@
uart3: serial@11005000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
clocks = <&uart_clk>;
status = "disabled";
};
};
-
};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
new file mode 100644
index 0000000..535532b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -0,0 +1,30 @@
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+&pm8916_gpios {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pm8916_gpios_default>;
+
+ pm8916_gpios_default: default {
+ usb_hub_reset_pm {
+ pins = "gpio1";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ usb_sw_sel_pm {
+ pins = "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-disable;
+ };
+ usr_led_3_ctrl {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ usr_led_4_ctrl {
+ pins = "gpio4";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
new file mode 100644
index 0000000..5f7023f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -0,0 +1,21 @@
+
+#include <dt-bindings/gpio/gpio.h>
+
+&msmgpio {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&soc_gpios_default>;
+
+ soc_gpios_default: default {
+ usr_led_1_ctrl_default: usr_led_1_ctrl_default {
+ pins = "gpio21";
+ function = "gpio";
+ output-low;
+ };
+ usr_led_2_ctrl_default: usr_led_2_ctrl_default {
+ pins = "gpio120";
+ function = "gpio";
+ output-low;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 703a4f1..98abece 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -12,6 +12,9 @@
*/
#include "msm8916.dtsi"
+#include "pm8916.dtsi"
+#include "apq8016-sbc-soc-pins.dtsi"
+#include "apq8016-sbc-pmic-pins.dtsi"
/ {
aliases {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
index bea871b..a1aa0b2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
@@ -12,6 +12,7 @@
*/
#include "msm8916.dtsi"
+#include "pm8916.dtsi"
/ {
aliases {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index f212b83..0f49ebd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -77,7 +77,12 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
- pinctrl@1000000 {
+ restart@4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0x4ab000 0x4>;
+ };
+
+ msmgpio: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
@@ -192,5 +197,23 @@
status = "disabled";
};
};
+
+ spmi_bus: spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x200f000 0x001000>,
+ <0x2400000 0x400000>,
+ <0x2c00000 0x400000>,
+ <0x3800000 0x200000>,
+ <0x200a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
new file mode 100644
index 0000000..b222ece
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -0,0 +1,99 @@
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+ usid0: pm8916@0 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000 0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pwrkey@800 {
+ compatible = "qcom,pm8941-pwrkey";
+ reg = <0x800>;
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
+
+ pm8916_gpios: gpios@c000 {
+ compatible = "qcom,pm8916-gpio";
+ reg = <0xc000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8916_mpps: mpps@a000 {
+ compatible = "qcom,pm8916-mpp";
+ reg = <0xa000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8916_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8916_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ usb_in {
+ reg = <VADC_USBIN>;
+ qcom,pre-scaling = <1 10>;
+ };
+ vph_pwr {
+ reg = <VADC_VSYS>;
+ qcom,pre-scaling = <1 3>;
+ };
+ die_temp {
+ reg = <VADC_DIE_TEMP>;
+ };
+ ref_625mv {
+ reg = <VADC_REF_625MV>;
+ };
+ ref_1250v {
+ reg = <VADC_REF_1250MV>;
+ };
+ ref_gnd {
+ reg = <VADC_GND_REF>;
+ };
+ ref_vdd {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
+ };
+
+ usid1: pm8916@1 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h
index a5abb00..71f19c4 100644
--- a/arch/arm64/include/asm/barrier.h
+++ b/arch/arm64/include/asm/barrier.h
@@ -65,6 +65,14 @@ do { \
do { \
compiletime_assert_atomic_type(*p); \
switch (sizeof(*p)) { \
+ case 1: \
+ asm volatile ("stlrb %w1, %0" \
+ : "=Q" (*p) : "r" (v) : "memory"); \
+ break; \
+ case 2: \
+ asm volatile ("stlrh %w1, %0" \
+ : "=Q" (*p) : "r" (v) : "memory"); \
+ break; \
case 4: \
asm volatile ("stlr %w1, %0" \
: "=Q" (*p) : "r" (v) : "memory"); \
@@ -81,6 +89,14 @@ do { \
typeof(*p) ___p1; \
compiletime_assert_atomic_type(*p); \
switch (sizeof(*p)) { \
+ case 1: \
+ asm volatile ("ldarb %w0, %1" \
+ : "=r" (___p1) : "Q" (*p) : "memory"); \
+ break; \
+ case 2: \
+ asm volatile ("ldarh %w0, %1" \
+ : "=r" (___p1) : "Q" (*p) : "memory"); \
+ break; \
case 4: \
asm volatile ("ldar %w0, %1" \
: "=r" (___p1) : "Q" (*p) : "memory"); \
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 195991d..23f25ac 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -1310,7 +1310,7 @@ static const struct of_device_id armpmu_of_device_ids[] = {
static int armpmu_device_probe(struct platform_device *pdev)
{
- int i, *irqs;
+ int i, irq, *irqs;
if (!cpu_pmu)
return -ENODEV;
@@ -1319,6 +1319,11 @@ static int armpmu_device_probe(struct platform_device *pdev)
if (!irqs)
return -ENOMEM;
+ /* Don't bother with PPIs; they're already affine */
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0 && irq_is_percpu(irq))
+ return 0;
+
for (i = 0; i < pdev->num_resources; ++i) {
struct device_node *dn;
int cpu;
@@ -1327,7 +1332,7 @@ static int armpmu_device_probe(struct platform_device *pdev)
i);
if (!dn) {
pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
- of_node_full_name(dn), i);
+ of_node_full_name(pdev->dev.of_node), i);
break;
}
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index ef7d112..b0bd4e5 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -67,8 +67,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page, gfp_t flags)
*ret_page = phys_to_page(phys);
ptr = (void *)val;
- if (flags & __GFP_ZERO)
- memset(ptr, 0, size);
+ memset(ptr, 0, size);
}
return ptr;
@@ -105,7 +104,6 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
struct page *page;
void *addr;
- size = PAGE_ALIGN(size);
page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT,
get_order(size));
if (!page)
@@ -113,8 +111,7 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
*dma_handle = phys_to_dma(dev, page_to_phys(page));
addr = page_address(page);
- if (flags & __GFP_ZERO)
- memset(addr, 0, size);
+ memset(addr, 0, size);
return addr;
} else {
return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
@@ -195,6 +192,8 @@ static void __dma_free(struct device *dev, size_t size,
{
void *swiotlb_addr = phys_to_virt(dma_to_phys(dev, dma_handle));
+ size = PAGE_ALIGN(size);
+
if (!is_device_dma_coherent(dev)) {
if (__free_from_pool(vaddr, size))
return;
generated by cgit v0.10.2 at 2024-09-15 05:21:04 (GMT)