diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/Kconfig | 14 | ||||
| -rw-r--r-- | arch/arm/boot/dts/tegra-harmony.dts | 12 | ||||
| -rw-r--r-- | arch/arm/boot/dts/tegra-seaboard.dts | 6 | ||||
| -rw-r--r-- | arch/arm/include/asm/futex.h | 34 | ||||
| -rw-r--r-- | arch/arm/include/asm/unistd.h | 4 | ||||
| -rw-r--r-- | arch/arm/kernel/smp_scu.c | 10 | ||||
| -rw-r--r-- | arch/arm/kernel/vmlinux.lds.S | 15 | ||||
| -rw-r--r-- | arch/arm/mach-dove/common.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/vision_ep9307.c | 364 | ||||
| -rw-r--r-- | arch/arm/mach-exynos4/clock.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/integrator_ap.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/pci_v3.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2443/clock.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s5pv210/clock.c | 6 | ||||
| -rw-r--r-- | arch/arm/mm/cache-v7.S | 20 | ||||
| -rw-r--r-- | arch/arm/mm/dma-mapping.c | 2 | ||||
| -rw-r--r-- | arch/arm/plat-s5p/irq-gpioint.c | 9 |
19 files changed, 471 insertions, 47 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3269576..3146ed3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1283,6 +1283,20 @@ config ARM_ERRATA_364296 processor into full low interrupt latency mode. ARM11MPCore is not affected. +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 4c05334..e581866 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -57,14 +57,14 @@ }; sdhci@c8000200 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; sdhci@c8000600 { - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 1940cae..64cedca 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -21,8 +21,8 @@ }; sdhci@c8000400 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 8c73900..253cc86 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include <linux/preempt.h> #include <asm/domain.h> -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2c04ed5..c60a294 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 79ed5e7..7fcddb7 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include <asm/smp_scu.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index bf977f8..4e66f62 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,8 +23,10 @@ #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4; SECTIONS { /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -47,6 +54,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -58,6 +68,8 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif + *(.discard) + *(.discard.*) } #ifdef CONFIG_XIP_KERNEL @@ -279,9 +291,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS } /* diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 83dce85..a9e0dae 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 3a08b18..97a2493 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -182,6 +182,13 @@ config MACH_TS72XX Say 'Y' here if you want your kernel to support the Technologic Systems TS-72xx board. +config MACH_VISION_EP9307 + bool "Support Vision Engraving Systems EP9307 SoM" + depends on EP93XX_SDCE0_PHYS_OFFSET + help + Say 'Y' here if you want your kernel to support the + Vision Engraving Systems EP9307 SoM. + choice prompt "Select a UART for early kernel messages" diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 3cedcf2..574209d9 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_MACH_MICRO9) += micro9.o obj-$(CONFIG_MACH_SIM_ONE) += simone.o obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o obj-$(CONFIG_MACH_TS72XX) += ts72xx.o +obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c new file mode 100644 index 0000000..10f6488 --- /dev/null +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -0,0 +1,364 @@ +/* + * arch/arm/mach-ep93xx/vision_ep9307.c + * Vision Engraving Systems EP9307 SoM support. + * + * Copyright (C) 2008-2011 Vision Engraving Systems + * H Hartley Sweeten <hsweeten@visionengravers.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/fb.h> +#include <linux/io.h> +#include <linux/mtd/partitions.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/i2c/pca953x.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/spi/mmc_spi.h> +#include <linux/mmc/host.h> + +#include <mach/hardware.h> +#include <mach/fb.h> +#include <mach/ep93xx_spi.h> + +#include <asm/mach-types.h> +#include <asm/mach/map.h> +#include <asm/mach/arch.h> + +/************************************************************************* + * Static I/O mappings for the FPGA + *************************************************************************/ +#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE +#define VISION_VIRT_BASE 0xfebff000 + +static struct map_desc vision_io_desc[] __initdata = { + { + .virtual = VISION_VIRT_BASE, + .pfn = __phys_to_pfn(VISION_PHYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init vision_map_io(void) +{ + ep93xx_map_io(); + + iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc)); +} + +/************************************************************************* + * Ethernet + *************************************************************************/ +static struct ep93xx_eth_data vision_eth_data __initdata = { + .phy_id = 1, +}; + +/************************************************************************* + * Framebuffer + *************************************************************************/ +#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1 + +static int vision_lcd_setup(struct platform_device *pdev) +{ + int err; + + err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH, + dev_name(&pdev->dev)); + if (err) + return err; + + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS | + EP93XX_SYSCON_DEVCFG_RASONP3 | + EP93XX_SYSCON_DEVCFG_EXVC); + + return 0; +} + +static void vision_lcd_teardown(struct platform_device *pdev) +{ + gpio_free(VISION_LCD_ENABLE); +} + +static void vision_lcd_blank(int blank_mode, struct fb_info *info) +{ + if (blank_mode) + gpio_set_value(VISION_LCD_ENABLE, 0); + else + gpio_set_value(VISION_LCD_ENABLE, 1); +} + +static struct ep93xxfb_mach_info ep93xxfb_info __initdata = { + .num_modes = EP93XXFB_USE_MODEDB, + .bpp = 16, + .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, + .setup = vision_lcd_setup, + .teardown = vision_lcd_teardown, + .blank = vision_lcd_blank, +}; + + +/************************************************************************* + * GPIO Expanders + *************************************************************************/ +#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1) +#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16) +#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16) +#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16) + +static struct pca953x_platform_data pca953x_74_gpio_data = { + .gpio_base = PCA9539_74_GPIO_BASE, + .irq_base = EP93XX_BOARD_IRQ(0), +}; + +static struct pca953x_platform_data pca953x_75_gpio_data = { + .gpio_base = PCA9539_75_GPIO_BASE, + .irq_base = -1, +}; + +static struct pca953x_platform_data pca953x_76_gpio_data = { + .gpio_base = PCA9539_76_GPIO_BASE, + .irq_base = -1, +}; + +static struct pca953x_platform_data pca953x_77_gpio_data = { + .gpio_base = PCA9539_77_GPIO_BASE, + .irq_base = -1, +}; + +/************************************************************************* + * I2C Bus + *************************************************************************/ +static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = { + .sda_pin = EP93XX_GPIO_LINE_EEDAT, + .scl_pin = EP93XX_GPIO_LINE_EECLK, +}; + +static struct i2c_board_info vision_i2c_info[] __initdata = { + { + I2C_BOARD_INFO("isl1208", 0x6f), + .irq = IRQ_EP93XX_EXT1, + }, { + I2C_BOARD_INFO("pca9539", 0x74), + .platform_data = &pca953x_74_gpio_data, + .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)), + }, { + I2C_BOARD_INFO("pca9539", 0x75), + .platform_data = &pca953x_75_gpio_data, + }, { + I2C_BOARD_INFO("pca9539", 0x76), + .platform_data = &pca953x_76_gpio_data, + }, { + I2C_BOARD_INFO("pca9539", 0x77), + .platform_data = &pca953x_77_gpio_data, + }, +}; + +/************************************************************************* + * SPI Flash + *************************************************************************/ +#define VISION_SPI_FLASH_CS EP93XX_GPIO_LINE_EGPIO7 + +static struct mtd_partition vision_spi_flash_partitions[] = { + { + .name = "SPI bootstrap", + .offset = 0, + .size = SZ_4K, + }, { + .name = "Bootstrap config", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4K, + }, { + .name = "System config", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data vision_spi_flash_data = { + .name = "SPI Flash", + .parts = vision_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions), +}; + +static int vision_spi_flash_hw_setup(struct spi_device *spi) +{ + return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH, + spi->modalias); +} + +static void vision_spi_flash_hw_cleanup(struct spi_device *spi) +{ + gpio_free(VISION_SPI_FLASH_CS); +} + +static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value) +{ + gpio_set_value(VISION_SPI_FLASH_CS, value); +} + +static struct ep93xx_spi_chip_ops vision_spi_flash_hw = { + .setup = vision_spi_flash_hw_setup, + .cleanup = vision_spi_flash_hw_cleanup, + .cs_control = vision_spi_flash_hw_cs_control, +}; + +/************************************************************************* + * SPI SD/MMC host + *************************************************************************/ +#define VISION_SPI_MMC_CS EP93XX_GPIO_LINE_G(2) +#define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0) +#define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15 + +static struct gpio vision_spi_mmc_gpios[] = { + { VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" }, + { VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" }, +}; + +static int vision_spi_mmc_init(struct device *pdev, + irqreturn_t (*func)(int, void *), void *pdata) +{ + int err; + + err = gpio_request_array(vision_spi_mmc_gpios, + ARRAY_SIZE(vision_spi_mmc_gpios)); + if (err) + return err; + + err = gpio_set_debounce(VISION_SPI_MMC_CD, 1); + if (err) + goto exit_err; + + err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func, + IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata); + if (err) + goto exit_err; + + return 0; + +exit_err: + gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios)); + return err; + +} + +static void vision_spi_mmc_exit(struct device *pdev, void *pdata) +{ + free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata); + gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios)); +} + +static int vision_spi_mmc_get_ro(struct device *pdev) +{ + return !!gpio_get_value(VISION_SPI_MMC_WP); +} + +static int vision_spi_mmc_get_cd(struct device *pdev) +{ + return !gpio_get_value(VISION_SPI_MMC_CD); +} + +static struct mmc_spi_platform_data vision_spi_mmc_data = { + .init = vision_spi_mmc_init, + .exit = vision_spi_mmc_exit, + .get_ro = vision_spi_mmc_get_ro, + .get_cd = vision_spi_mmc_get_cd, + .detect_delay = 100, + .powerup_msecs = 100, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static int vision_spi_mmc_hw_setup(struct spi_device *spi) +{ + return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH, + spi->modalias); +} + +static void vision_spi_mmc_hw_cleanup(struct spi_device *spi) +{ + gpio_free(VISION_SPI_MMC_CS); +} + +static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value) +{ + gpio_set_value(VISION_SPI_MMC_CS, value); +} + +static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = { + .setup = vision_spi_mmc_hw_setup, + .cleanup = vision_spi_mmc_hw_cleanup, + .cs_control = vision_spi_mmc_hw_cs_control, +}; + +/************************************************************************* + * SPI Bus + *************************************************************************/ +static struct spi_board_info vision_spi_board_info[] __initdata = { + { + .modalias = "sst25l", + .platform_data = &vision_spi_flash_data, + .controller_data = &vision_spi_flash_hw, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_3, + }, { + .modalias = "mmc_spi", + .platform_data = &vision_spi_mmc_data, + .controller_data = &vision_spi_mmc_hw, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_3, + }, +}; + +static struct ep93xx_spi_info vision_spi_master __initdata = { + .num_chipselect = ARRAY_SIZE(vision_spi_board_info), +}; + +/************************************************************************* + * Machine Initialization + *************************************************************************/ +static void __init vision_init_machine(void) +{ + ep93xx_init_devices(); + ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M); + ep93xx_register_eth(&vision_eth_data, 1); + ep93xx_register_fb(&ep93xxfb_info); + ep93xx_register_pwm(1, 0); + + /* + * Request the gpio expander's interrupt gpio line now to prevent + * the kernel from doing a WARN in gpiolib:gpio_ensure_requested(). + */ + if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN, + "pca9539:74")) + pr_warn("cannot request interrupt gpio for pca9539:74\n"); + + ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info, + ARRAY_SIZE(vision_i2c_info)); + ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, + ARRAY_SIZE(vision_spi_board_info)); +} + +MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") + /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */ + .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, + .map_io = vision_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = vision_init_machine, +MACHINE_END diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 2a037cc..0d59be3 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -948,8 +948,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.0", + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -958,8 +957,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.1", + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index fcf0ae9..8cdc730 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); + vga_base = PCI_MEMORY_VADDR; } #define INTEGRATOR_SC_VALID_INT 0x003fffff diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index dd56bfb..11b86e5 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <linux/init.h> #include <linux/io.h> -#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -505,7 +504,6 @@ void __init pci_v3_preinit(void) pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; - vga_base = PCI_MEMORY_VADDR; /* * Hook in our fault handler for PCI errors diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index a1a7176..38058af 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) unsigned long clkcon0; clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; __raw_writel(clkcon0, S3C2443_CLKDIV0); } diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e60..f5f8fa8 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.0", + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.1", + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 3b24bfa..07c4bc8 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 @@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area) add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -247,6 +255,10 @@ v7_dma_inv_range: sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 @@ -270,6 +282,10 @@ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 @@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0a0a1e7..c3ff82f 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -324,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); + else + __dma_free_buffer(page, size); return addr; } diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index f71078e..f88216d 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -114,17 +114,18 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; - struct s5p_gpioint_bank *bank = NULL; + struct s5p_gpioint_bank *b, *bank = NULL; struct irq_chip_generic *gc; struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) + list_for_each_entry(b, &banks, list) { + if (group >= b->start && group < b->start + b->nr_groups) { + bank = b; break; + } } if (!bank) return -EINVAL; |