diff options
Diffstat (limited to 'arch/arm')
70 files changed, 970 insertions, 282 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7f99cd6..eb7bb51 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN) += berlin machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx machine-$(CONFIG_ARCH_DAVINCI) += davinci +machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EFM32) += efm32 diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 6cc25ed..c3255e0 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -195,6 +195,7 @@ &usb0 { status = "okay"; + dr_mode = "peripheral"; }; &usb1 { @@ -300,3 +301,11 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; cd-inverted; }; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 83d40f7..6b849372 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -24,11 +24,3 @@ &mmc1 { vmmc-supply = <&ldo3_reg>; }; - -&sham { - status = "okay"; -}; - -&aes { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index 7266a00..5c5667a 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -328,6 +328,10 @@ dual_emac_res_vlan = <3>; }; +&phy_sel { + rmii-clock-ext; +}; + &mac { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 712edce..071b56a 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -99,7 +99,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -107,7 +107,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index f9a17e2..0198f5a 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -133,20 +133,6 @@ >; }; - i2c1_pins_default: i2c1_pins_default { - pinctrl-single,pins = < - 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ - >; - }; - - i2c1_pins_sleep: i2c1_pins_sleep { - pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */ - >; - }; - mmc1_pins_default: pinmux_mmc1_pins_default { pinctrl-single,pins = < 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ @@ -254,7 +240,7 @@ status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c0_pins_default>; - pinctrl-1 = <&i2c0_pins_default>; + pinctrl-1 = <&i2c0_pins_sleep>; clock-frequency = <400000>; at24@50 { @@ -262,17 +248,10 @@ pagesize = <64>; reg = <0x50>; }; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_default>; - pinctrl-1 = <&i2c1_pins_default>; - clock-frequency = <400000>; tps: tps62362@60 { compatible = "ti,tps62362"; + reg = <0x60>; regulator-name = "VDD_MPU"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1330000>; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index c7dc9da..cfb4968 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -107,7 +107,7 @@ ehrpwm0_tbclk: ehrpwm0_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; @@ -115,7 +115,7 @@ ehrpwm1_tbclk: ehrpwm1_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; @@ -123,7 +123,7 @@ ehrpwm2_tbclk: ehrpwm2_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; @@ -131,7 +131,7 @@ ehrpwm3_tbclk: ehrpwm3_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <4>; reg = <0x0664>; }; @@ -139,7 +139,7 @@ ehrpwm4_tbclk: ehrpwm4_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <5>; reg = <0x0664>; }; @@ -147,7 +147,7 @@ ehrpwm5_tbclk: ehrpwm5_tbclk { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_per_m2_ck>; + clocks = <&l4ls_gclk>; ti,bit-shift = <6>; reg = <0x0664>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 03750af..6463f9e 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -549,14 +549,6 @@ pinctrl-0 = <&usb1_pins>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb2 { dr_mode = "peripheral"; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index fff0ee6..ac2c5dd 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -494,12 +494,12 @@ pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC8 periph B */ + <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = - <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC10 periph B */ + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; @@ -976,7 +976,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 1f67bb4..088219d 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -69,7 +69,7 @@ sram1: sram@00500000 { compatible = "mmio-sram"; - reg = <0x00300000 0x4000>; + reg = <0x00500000 0x4000>; }; ahb { @@ -905,7 +905,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index ee80aa9..1198931 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1116,7 +1116,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index c2666a7..0c53a375 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -894,7 +894,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 818dabd..e77c9bb 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1130,7 +1130,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 857d028..d3a29c1 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -35,6 +35,18 @@ DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */ >; }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */ + >; + }; }; &i2c1 { @@ -127,3 +139,16 @@ &mmc1 { vmmc-supply = <&vmmcsd_fixed>; }; + +/* At least dm8168-evm rev c won't support multipoint, later may */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + mentor,multipoint = <0>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + mentor,multipoint = <0>; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index d98d0f7..3c97b5f 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -97,10 +97,31 @@ /* Device Configuration Registers */ scm_conf: syscon@600 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x600 0x110>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x600 0x110>; + + usb_phy0: usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; + + usb_phy1: usb-phy@28 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x28 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; }; scrm_clocks: clocks { @@ -357,7 +378,10 @@ reg-names = "mc", "control"; interrupts = <18>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy0>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; @@ -366,13 +390,15 @@ usb1: usb@47401800 { compatible = "ti,musb-am33xx"; - status = "disabled"; reg = <0x47401c00 0x400 0x47401800 0x200>; reg-names = "mc", "control"; interrupts = <19>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy1>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 746cddb..7563d7c 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -263,17 +263,15 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (MUX_MODE15) /* wakeup0.off */ + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; }; @@ -543,14 +541,6 @@ }; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 5827fed..127608d 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -249,8 +249,8 @@ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -1090,8 +1090,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 4d87117..40ed539 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -119,17 +119,15 @@ dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */ + 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < - 0x3d0 (MUX_MODE15) /* dcan1_tx.off */ - 0x3d4 (MUX_MODE15) /* dcan1_rx.off */ - 0x418 (MUX_MODE15) /* wakeup0.off */ + 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; @@ -380,14 +378,6 @@ phy-supply = <&ldo4_reg>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 4bdcbd6..99b09a4 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -243,10 +243,18 @@ ti,invert-autoidle-bit; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -309,10 +317,18 @@ clock-div = <1>; }; + dpll_dsp_byp_mux: dpll_dsp_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0240>; + }; + dpll_dsp_ck: dpll_dsp_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; }; @@ -335,10 +351,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -361,10 +385,18 @@ clock-div = <1>; }; + dpll_gpu_byp_mux: dpll_gpu_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02e4>; + }; + dpll_gpu_ck: dpll_gpu_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; }; @@ -398,10 +430,18 @@ clock-div = <1>; }; + dpll_ddr_byp_mux: dpll_ddr_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x021c>; + }; + dpll_ddr_ck: dpll_ddr_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; @@ -416,10 +456,18 @@ ti,invert-autoidle-bit; }; + dpll_gmac_byp_mux: dpll_gmac_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x02b4>; + }; + dpll_gmac_ck: dpll_gmac_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; @@ -482,10 +530,18 @@ clock-div = <1>; }; + dpll_eve_byp_mux: dpll_eve_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x0290>; + }; + dpll_eve_ck: dpll_eve_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; @@ -1249,10 +1305,18 @@ clock-div = <1>; }; + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -1275,10 +1339,18 @@ clock-div = <1>; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 277b48b..ac6b0ae 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -18,6 +18,7 @@ */ #include "skeleton.dtsi" +#include "exynos4-cpu-thermal.dtsi" #include <dt-bindings/clock/exynos3250.h> / { @@ -193,6 +194,7 @@ interrupts = <0 216 0>; clocks = <&cmu CLK_TMU_APBIF>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi new file mode 100644 index 0000000..735cb2f --- /dev/null +++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi @@ -0,0 +1,52 @@ +/* + * Device tree sources for Exynos4 thermal zone + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal.h> + +/ { +thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + cpu_alert0: cpu-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <95000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + }; + map1 { + trip = <&cpu_alert1>; + }; + }; + }; +}; +}; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 76173ca..77ea547 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -38,6 +38,7 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + i2c8 = &i2c_8; csis0 = &csis_0; csis1 = &csis_1; fimc0 = &fimc_0; @@ -104,6 +105,7 @@ compatible = "samsung,exynos4210-pd"; reg = <0x10023C20 0x20>; #power-domain-cells = <0>; + power-domains = <&pd_lcd0>; }; pd_cam: cam-power-domain@10023C00 { @@ -554,6 +556,22 @@ status = "disabled"; }; + i2c_8: i2c@138E0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x138E0000 0x100>; + interrupts = <0 93 0>; + clocks = <&clock CLK_I2C_HDMI>; + clock-names = "i2c"; + status = "disabled"; + + hdmi_i2c_phy: hdmiphy@38 { + compatible = "exynos4210-hdmiphy"; + reg = <0x38>; + }; + }; + spi_0: spi@13920000 { compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; @@ -663,6 +681,33 @@ status = "disabled"; }; + tmu: tmu@100C0000 { + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + hdmi: hdmi@12D00000 { + compatible = "samsung,exynos4210-hdmi"; + reg = <0x12D00000 0x70000>; + interrupts = <0 92 0>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", + "mout_hdmi"; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; + phy = <&hdmi_i2c_phy>; + power-domains = <&pd_tv>; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + mixer: mixer@12C10000 { + compatible = "samsung,exynos4210-mixer"; + interrupts = <0 91 0>; + reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; + power-domains = <&pd_tv>; + status = "disabled"; + }; + ppmu_dmc0: ppmu_dmc0@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 3d6652a..32c5fd8 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -426,6 +426,25 @@ status = "okay"; }; + tmu@100C0000 { + status = "okay"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 4 4>; + }; + }; + }; + }; + camera { pinctrl-names = "default"; pinctrl-0 = <>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index b57e6b8..d4f2b11 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -505,6 +505,63 @@ assigned-clock-rates = <0>, <160000000>; }; }; + + hdmi_en: voltage-regulator-hdmi-5v { + compatible = "regulator-fixed"; + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpe0 1 0>; + enable-active-high; + }; + + hdmi_ddc: i2c-ddc { + compatible = "i2c-gpio"; + gpios = <&gpe4 2 0 &gpe4 3 0>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_ddc_bus>; + pinctrl-names = "default"; + status = "okay"; + }; + + mixer@12C10000 { + status = "okay"; + }; + + hdmi@12D00000 { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + hdmi-en-supply = <&hdmi_en>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; + }; + + i2c@138E0000 { + status = "okay"; + }; +}; + +&pinctrl_1 { + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <0>; + }; +}; + +&pinctrl_0 { + i2c_ddc_bus: i2c-ddc-bus { + samsung,pins = "gpe4-2", "gpe4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 67c832c..be89f83 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -21,6 +21,7 @@ #include "exynos4.dtsi" #include "exynos4210-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { compatible = "samsung,exynos4210", "samsung,exynos4"; @@ -35,10 +36,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@900 { + cpu0: cpu@900 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x900>; + cooling-min-level = <4>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@901 { @@ -153,16 +157,38 @@ reg = <0x03860000 0x1000>; }; - tmu@100C0000 { + tmu: tmu@100C0000 { compatible = "samsung,exynos4210-tmu"; interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; interrupts = <2 4>; clocks = <&clock CLK_TMU_APBIF>; clock-names = "tmu_apbif"; + samsung,tmu_gain = <15>; + samsung,tmu_reference_voltage = <7>; status = "disabled"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert0: cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + }; + cpu_alert1: cpu-alert-1 { + temperature = <100000>; /* millicelsius */ + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + }; + }; + }; + }; + g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; @@ -203,6 +229,14 @@ }; }; + mixer: mixer@12C10000 { + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer", + "sclk_mixer"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>, + <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; + }; + ppmu_lcd1: ppmu_lcd1@12240000 { compatible = "samsung,exynos-ppmu"; reg = <0x12240000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index dd0a43e..5be0328 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -26,10 +26,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@A00 { + cpu0: cpu@A00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + cooling-min-level = <13>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@A01 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index de80b5b..adb4f6a 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -249,6 +249,20 @@ regulator-always-on; }; + ldo8_reg: ldo@8 { + regulator-compatible = "LDO8"; + regulator-name = "VDD10_HDMI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo10_reg: ldo@10 { + regulator-compatible = "LDO10"; + regulator-name = "VDDQ_MIPIHSI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo11_reg: LDO11 { regulator-name = "VDD18_ABB1_1.8V"; regulator-min-microvolt = <1800000>; @@ -411,6 +425,51 @@ ehci: ehci@12580000 { status = "okay"; }; + + tmu@100C0000 { + vtmu-supply = <&ldo10_reg>; + status = "okay"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; + + mixer: mixer@12C10000 { + status = "okay"; + }; + + hdmi@12D00000 { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; + }; + + hdmi_ddc: i2c@13880000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + }; + + i2c@138E0000 { + status = "okay"; + }; }; &pinctrl_1 { @@ -425,4 +484,9 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <1>; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi new file mode 100644 index 0000000..e3f7934 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos4412 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <55>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <100>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 21f7480..173ffa4 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -927,6 +927,21 @@ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; }; &pmu_system_controller { diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 0f6ec93..68ad43b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -26,10 +26,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@A00 { + cpu0: cpu@A00 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA00>; + cooling-min-level = <13>; + cooling-max-level = <7>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@A01 { diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index f5e0ae7..6a6abe1 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -19,6 +19,7 @@ #include "exynos4.dtsi" #include "exynos4x12-pinctrl.dtsi" +#include "exynos4-cpu-thermal.dtsi" / { aliases { @@ -297,4 +298,15 @@ clock-names = "tmu_apbif"; status = "disabled"; }; + + hdmi: hdmi@12D00000 { + compatible = "samsung,exynos4212-hdmi"; + }; + + mixer: mixer@12C10000 { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 9bb1b0b..adbde1a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -20,7 +20,7 @@ #include <dt-bindings/clock/exynos5250.h> #include "exynos5.dtsi" #include "exynos5250-pinctrl.dtsi" - +#include "exynos4-cpu-thermal.dtsi" #include <dt-bindings/clock/exynos-audss-clk.h> / { @@ -58,11 +58,14 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1700000000>; + cooling-min-level = <15>; + cooling-max-level = <9>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu"; @@ -102,6 +105,12 @@ #power-domain-cells = <0>; }; + pd_disp1: disp1-power-domain@100440A0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440A0 0x20>; + #power-domain-cells = <0>; + }; + clock: clock-controller@10010000 { compatible = "samsung,exynos5250-clock"; reg = <0x10010000 0x30000>; @@ -235,12 +244,32 @@ status = "disabled"; }; - tmu@10060000 { + tmu: tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; interrupts = <0 65 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; + + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 9 9>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 15 15>; + }; + }; + }; }; serial@12C00000 { @@ -719,6 +748,7 @@ hdmi: hdmi { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; + power-domains = <&pd_disp1>; interrupts = <0 95 0>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, @@ -731,9 +761,11 @@ mixer { compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; + power-domains = <&pd_disp1>; interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "sclk_hdmi"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; }; dp_phy: video-phy@10040720 { @@ -743,6 +775,7 @@ }; dp: dp-controller@145B0000 { + power-domains = <&pd_disp1>; clocks = <&clock CLK_DP>; clock-names = "dp"; phys = <&dp_phy>; @@ -750,6 +783,7 @@ }; fimd: fimd@14400000 { + power-domains = <&pd_disp1>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi new file mode 100644 index 0000000..5d31fc1 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi @@ -0,0 +1,35 @@ +/* + * Device tree sources for default Exynos5420 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-alert-1 { + temperature = <103000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1200000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 9dc2e97..c0e98cf 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -740,8 +740,9 @@ compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "sclk_hdmi"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; power-domains = <&disp_pd>; }; @@ -782,6 +783,7 @@ interrupts = <0 65 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu1: tmu@10064000 { @@ -790,6 +792,7 @@ interrupts = <0 183 0>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu2: tmu@10068000 { @@ -798,6 +801,7 @@ interrupts = <0 184 0>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu3: tmu@1006c000 { @@ -806,6 +810,7 @@ interrupts = <0 185 0>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_gpu: tmu@100a0000 { @@ -814,6 +819,30 @@ interrupts = <0 215 0>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; + #include "exynos5420-trip-points.dtsi" + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" + }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu>; + #include "exynos5420-trip-points.dtsi" + }; }; watchdog: watchdog@101D0000 { diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi new file mode 100644 index 0000000..7b2fba0 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos5440 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <5>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <0x5d2d>; +samsung,tmu_min_efuse_value = <16>; +samsung,tmu_max_efuse_value = <76>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <70>; +samsung,tmu_default_temp_offset = <25>; +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi new file mode 100644 index 0000000..48adfa8 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi @@ -0,0 +1,25 @@ +/* + * Device tree sources for default Exynos5440 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <100000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1050000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 8f3373c..59d9416 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -219,6 +219,7 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; tmuctrl_1: tmuctrl@16011C { @@ -227,6 +228,7 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; tmuctrl_2: tmuctrl@160120 { @@ -235,6 +237,22 @@ interrupts = <0 58 0>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmuctrl_0>; + #include "exynos5440-trip-points.dtsi" + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmuctrl_1>; + #include "exynos5440-trip-points.dtsi" + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmuctrl_2>; + #include "exynos5440-trip-points.dtsi" + }; }; sata@210000 { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 59d1c29..578fa2a 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -87,8 +87,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <64>; + dma-channels = <32>; + dma-requests = <64>; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 6040327..db80f9d 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -16,6 +16,13 @@ model = "Nokia N900"; compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; + aliases { + i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -704,7 +711,7 @@ compatible = "smsc,lan91c94"; interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ - reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + reg = <1 0 0xf>; /* 16 byte IO range */ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 01b7111..f4f78c4 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -155,8 +155,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <96>; + dma-channels = <32>; + dma-requests = <96>; }; omap3_pmx_core: pinmux@48002030 { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 074147c..87401d9 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -223,8 +223,8 @@ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4a310000 { diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi index 19212ac..de8a3d4 100644 --- a/arch/arm/boot/dts/omap5-core-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi @@ -13,7 +13,7 @@ core_thermal: core_thermal { polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ /* sensor ID */ thermal-sensors = <&bandgap 2>; diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi index 1b87aca..bc3090f 100644 --- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi @@ -13,7 +13,7 @@ gpu_thermal: gpu_thermal { polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ /* sensor ID */ thermal-sensors = <&bandgap 1>; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index b321fdf..4a485b6 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -238,8 +238,8 @@ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -929,8 +929,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin>; - clock-names = "sysclk"; + clocks = <&sys_clkin>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; }; @@ -1079,4 +1079,8 @@ }; }; +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ +}; + /include/ "omap54xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 58c2746..83b425f 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -167,10 +167,18 @@ ti,index-starts-at-one; }; + dpll_core_byp_mux: dpll_core_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + ti,bit-shift = <23>; + reg = <0x012c>; + }; + dpll_core_ck: dpll_core_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; - clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; + clocks = <&sys_clkin>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -294,10 +302,18 @@ clock-div = <1>; }; + dpll_iva_byp_mux: dpll_iva_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x01ac>; + }; + dpll_iva_ck: dpll_iva_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; }; @@ -599,10 +615,19 @@ }; }; &cm_core_clocks { + + dpll_per_byp_mux: dpll_per_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x014c>; + }; + dpll_per_ck: dpll_per_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; - clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -714,10 +739,18 @@ ti,index-starts-at-one; }; + dpll_usb_byp_mux: dpll_usb_byp_mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + ti,bit-shift = <23>; + reg = <0x018c>; + }; + dpll_usb_ck: dpll_usb_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; - clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; + clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 261311b..e30fee2 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1248,7 +1248,6 @@ atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; - atmel,idle-halt; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index d986b41..8240b49 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -66,6 +66,7 @@ gpio4 = &pioE; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; i2c2 = &i2c2; }; cpus { @@ -461,8 +462,8 @@ lcdck: lcdck { #clock-cells = <0>; - reg = <4>; - clocks = <&smd>; + reg = <3>; + clocks = <&mck>; }; smdck: smdck { @@ -770,7 +771,7 @@ reg = <50>; }; - lcd_clk: lcd_clk { + lcdc_clk: lcdc_clk { #clock-cells = <0>; reg = <51>; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 252c3d1..9d87609 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -713,6 +713,9 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + dmas = <&pdma 28>, + <&pdma 29>; + dma-names = "tx", "rx"; }; uart1: serial1@ffc03000 { @@ -722,6 +725,9 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + dmas = <&pdma 30>, + <&pdma 31>; + dma-names = "tx", "rx"; }; rst: rstmgr@ffd05000 { diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index f2670f6..811e72b 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -70,6 +70,7 @@ CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y +CONFIG_ARM_AT91_ETHER=y CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_DM9000=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e8a4c95..06075b6 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -62,6 +62,17 @@ CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_STI=y CONFIG_ARCH_EXYNOS=y CONFIG_EXYNOS5420_MCPM=y +CONFIG_ARCH_SHMOBILE_MULTI=y +CONFIG_ARCH_EMEV2=y +CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R8A73A4=y +CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7779=y +CONFIG_ARCH_R8A7790=y +CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_SH73A0=y +CONFIG_MACH_MARZEN=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y @@ -84,9 +95,11 @@ CONFIG_PCI_KEYSTONE=y CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCI_RCAR_GEN2_PCIE=y CONFIG_PCIEPORTBUS=y CONFIG_SMP=y -CONFIG_NR_CPUS=8 +CONFIG_NR_CPUS=16 CONFIG_HIGHPTE=y CONFIG_CMA=y CONFIG_ARM_APPENDED_DTB=y @@ -130,6 +143,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y +CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -157,6 +171,7 @@ CONFIG_AHCI_SUNXI=y CONFIG_AHCI_TEGRA=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y +CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y @@ -167,14 +182,17 @@ CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_KS8851=y CONFIG_R8169=y +CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=y +CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y +CONFIG_MICREL_PHY=y CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y @@ -192,15 +210,18 @@ CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SUN4I=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_ADXL34X=m CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y @@ -213,6 +234,9 @@ CONFIG_SERIAL_SIRFSOC_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=20 +CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_VT8500=y @@ -233,19 +257,26 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_GPIO=m CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_RIIC=y CONFIG_I2C_S3C2410=y +CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_SIRF=y -CONFIG_I2C_TEGRA=y CONFIG_I2C_ST=y -CONFIG_SPI=y +CONFIG_I2C_TEGRA=y CONFIG_I2C_XILINX=y -CONFIG_SPI_DAVINCI=y +CONFIG_I2C_RCAR=y +CONFIG_SPI=y CONFIG_SPI_CADENCE=y +CONFIG_SPI_DAVINCI=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y +CONFIG_SPI_RSPI=y +CONFIG_SPI_SH_MSIOF=m +CONFIG_SPI_SH_HSPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y @@ -259,12 +290,15 @@ CONFIG_PINCTRL_PALMAS=y CONFIG_PINCTRL_APQ8084=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_GPIO_DWAPB=y CONFIG_GPIO_DAVINCI=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_EM=y +CONFIG_GPIO_RCAR=y CONFIG_GPIO_XILINX=y CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_PCF857X=y CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y CONFIG_GPIO_SYSCON=y @@ -276,10 +310,12 @@ CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_POWER_RESET_SUN6I=y +CONFIG_POWER_RESET_RMOBILE=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y +CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_DAVINCI_WATCHDOG CONFIG_ST_THERMAL_SYSCFG=y @@ -290,6 +326,7 @@ CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MESON_WATCHDOG=y +CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_AXP20X=y @@ -304,13 +341,16 @@ CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BCM590XX=y +CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y CONFIG_REGULATOR_MAX8907=y +CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_S2MPS11=y @@ -324,18 +364,32 @@ CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_VEXPRESS=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_GSPCA=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_RENESAS_VSP1=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_ADV7180=m CONFIG_DRM=y +CONFIG_DRM_RCAR_DU=m CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y +CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SIMPLE=y +CONFIG_FB_SH_MOBILE_MERAM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_AS3711=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_SOUND=y @@ -343,6 +397,8 @@ CONFIG_SND=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_SOC=y +CONFIG_SND_SOC_SH4_FSI=m +CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_RT5640=y CONFIG_SND_SOC_TEGRA_WM8753=y @@ -350,6 +406,8 @@ CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_SND_SOC_TEGRA_MAX98090=y +CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_WM8978=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y @@ -362,6 +420,8 @@ CONFIG_USB_ISP1760_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_R8A66597_HCD=m +CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y CONFIG_USB_CHIPIDEA=y @@ -374,6 +434,10 @@ CONFIG_SAMSUNG_USB3PHY=y CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y +CONFIG_USB_RCAR_PHY=m +CONFIG_USB_RCAR_GEN2_PHY=m +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y @@ -392,12 +456,14 @@ CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_MVSDIO=y -CONFIG_MMC_SUNXI=y +CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_PLTFM=y CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_MMC_SUNXI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -421,10 +487,12 @@ CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y +CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y @@ -436,6 +504,9 @@ CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y +CONFIG_SH_DMAE=y +CONFIG_RCAR_AUDMAC_PP=m +CONFIG_RCAR_DMAC=y CONFIG_STE_DMA40=y CONFIG_SIRF_DMA=y CONFIG_TI_EDMA=y @@ -468,6 +539,7 @@ CONFIG_IIO=y CONFIG_XILINX_XADC=y CONFIG_AK8975=y CONFIG_PWM=y +CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b738652..8e10859 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -114,6 +114,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_BCH=y CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y @@ -248,6 +249,7 @@ CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_TI_ABB=y +CONFIG_REGULATOR_TPS62360=m CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y @@ -374,7 +376,8 @@ CONFIG_PWM_TIEHRPWM=m CONFIG_PWM_TWL=m CONFIG_PWM_TWL_LED=m CONFIG_OMAP_USB2=m -CONFIG_TI_PIPE3=m +CONFIG_TI_PIPE3=y +CONFIG_TWL4030_USB=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 41d856e..510c747 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -3,8 +3,6 @@ CONFIG_SYSVIPC=y CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_SLAB=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 38840a8..8f6a570 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -4,6 +4,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y CONFIG_ARCH_SUNXI=y CONFIG_SMP=y +CONFIG_NR_CPUS=8 CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index f489fda..37fe607 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -118,8 +118,8 @@ CONFIG_HID_ZEROPLUS=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y -CONFIG_USB_ISP1760_HCD=y CONFIG_USB_STORAGE=y +CONFIG_USB_ISP1760=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index 80a6501..c3c45e6 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -18,8 +18,11 @@ #define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */ #endif -/* Keep in sync with mach-at91/include/mach/hardware.h */ +#ifdef CONFIG_MMU #define AT91_IO_P2V(x) ((x) - 0x01000000) +#else +#define AT91_IO_P2V(x) (x) +#endif #define AT91_DBGU_SR (0x14) /* Status Register */ #define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig index 8423be7..5224120 100644 --- a/arch/arm/mach-asm9260/Kconfig +++ b/arch/arm/mach-asm9260/Kconfig @@ -2,5 +2,7 @@ config MACH_ASM9260 bool "Alphascale ASM9260" depends on ARCH_MULTI_V5 select CPU_ARM926T + select ASM9260_TIMER + select GENERIC_CLOCKEVENTS help Support for Alphascale ASM9260 based platform. diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 5e34fb1..aa4116e 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -270,37 +270,35 @@ static void __init at91_pm_sram_init(void) phys_addr_t sram_pbase; unsigned long sram_base; struct device_node *node; - struct platform_device *pdev; + struct platform_device *pdev = NULL; - node = of_find_compatible_node(NULL, NULL, "mmio-sram"); - if (!node) { - pr_warn("%s: failed to find sram node!\n", __func__); - return; + for_each_compatible_node(node, NULL, "mmio-sram") { + pdev = of_find_device_by_node(node); + if (pdev) { + of_node_put(node); + break; + } } - pdev = of_find_device_by_node(node); if (!pdev) { pr_warn("%s: failed to find sram device!\n", __func__); - goto put_node; + return; } sram_pool = dev_get_gen_pool(&pdev->dev); if (!sram_pool) { pr_warn("%s: sram pool unavailable!\n", __func__); - goto put_node; + return; } sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz); if (!sram_base) { pr_warn("%s: unable to alloc ocram!\n", __func__); - goto put_node; + return; } sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base); slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false); - -put_node: - of_node_put(node); } #endif diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index d2c8996..86c0aa8 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -44,7 +44,7 @@ static inline void at91rm9200_standby(void) " mcr p15, 0, %0, c7, c0, 4\n\t" " str %5, [%1, %2]" : - : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR), + : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR), "r" (1), "r" (AT91RM9200_SDRAMC_SRR), "r" (lpr)); } diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 556151e8..8ab80e5 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -25,11 +25,6 @@ */ #undef SLOWDOWN_MASTER_CLOCK -#define MCKRDY_TIMEOUT 1000 -#define MOSCRDY_TIMEOUT 1000 -#define PLLALOCK_TIMEOUT 1000 -#define PLLBLOCK_TIMEOUT 1000 - pmc .req r0 sdramc .req r1 ramc1 .req r2 @@ -41,56 +36,36 @@ tmp2 .req r5 * Wait until master clock is ready (after switching master clock source) */ .macro wait_mckrdy - mov tmp2, #MCKRDY_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_MCKRDY beq 1b -2: .endm /* * Wait until master oscillator has stabilized. */ .macro wait_moscrdy - mov tmp2, #MOSCRDY_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_MOSCS beq 1b -2: .endm /* * Wait until PLLA has locked. */ .macro wait_pllalock - mov tmp2, #PLLALOCK_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_LOCKA beq 1b -2: .endm /* * Wait until PLLB has locked. */ .macro wait_pllblock - mov tmp2, #PLLBLOCK_TIMEOUT -1: sub tmp2, tmp2, #1 - cmp tmp2, #0 - beq 2f - ldr tmp1, [pmc, #AT91_PMC_SR] +1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_LOCKB beq 1b -2: .endm .text @@ -134,6 +109,16 @@ ddr_sr_enable: cmp memctrl, #AT91_MEMCTRL_DDRSDR bne sdr_sr_enable + /* LPDDR1 --> force DDR2 mode during self-refresh */ + ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR] + str tmp1, .saved_sam9_mdr + bic tmp1, tmp1, #~AT91_DDRSDRC_MD + cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR] + biceq tmp1, tmp1, #AT91_DDRSDRC_MD + orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2 + streq tmp1, [sdramc, #AT91_DDRSDRC_MDR] + /* prepare for DDRAM self-refresh mode */ ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR] str tmp1, .saved_sam9_lpr @@ -142,14 +127,26 @@ ddr_sr_enable: /* figure out if we use the second ram controller */ cmp ramc1, #0 - ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - strne tmp2, .saved_sam9_lpr1 - bicne tmp2, #AT91_DDRSDRC_LPCB - orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH + beq ddr_no_2nd_ctrl + + ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR] + str tmp2, .saved_sam9_mdr1 + bic tmp2, tmp2, #~AT91_DDRSDRC_MD + cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR] + biceq tmp2, tmp2, #AT91_DDRSDRC_MD + orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2 + streq tmp2, [ramc1, #AT91_DDRSDRC_MDR] + + ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR] + str tmp2, .saved_sam9_lpr1 + bic tmp2, #AT91_DDRSDRC_LPCB + orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH /* Enable DDRAM self-refresh mode */ + str tmp2, [ramc1, #AT91_DDRSDRC_LPR] +ddr_no_2nd_ctrl: str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] b sdr_sr_done @@ -208,6 +205,7 @@ sdr_sr_done: /* Turn off the main oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] bic tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] /* Wait for interrupt */ @@ -216,6 +214,7 @@ sdr_sr_done: /* Turn on the main oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] orr tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] wait_moscrdy @@ -280,12 +279,17 @@ sdr_sr_done: */ cmp memctrl, #AT91_MEMCTRL_DDRSDR bne sdr_en_restore + /* Restore MDR in case of LPDDR1 */ + ldr tmp1, .saved_sam9_mdr + str tmp1, [sdramc, #AT91_DDRSDRC_MDR] /* Restore LPR on AT91 with DDRAM */ ldr tmp1, .saved_sam9_lpr str tmp1, [sdramc, #AT91_DDRSDRC_LPR] /* if we use the second ram controller */ cmp ramc1, #0 + ldrne tmp2, .saved_sam9_mdr1 + strne tmp2, [ramc1, #AT91_DDRSDRC_MDR] ldrne tmp2, .saved_sam9_lpr1 strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] @@ -319,5 +323,11 @@ ram_restored: .saved_sam9_lpr1: .word 0 +.saved_sam9_mdr: + .word 0 + +.saved_sam9_mdr1: + .word 0 + ENTRY(at91_slow_clock_sz) .word .-at91_slow_clock diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 3f32c47..d2e9f12 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -126,8 +126,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) */ void exynos_cpu_power_down(int cpu) { - if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") || - of_machine_is_compatible("samsung,exynos5800"))) { + if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) { /* * Bypass power down for CPU0 during suspend. Check for * the SYS_PWR_REG value to decide if we are suspending diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 20f2671..37266a8 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -161,6 +161,34 @@ no_clk: of_genpd_add_provider_simple(np, &pd->pd); } + /* Assign the child power domains to their parents */ + for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + struct generic_pm_domain *child_domain, *parent_domain; + struct of_phandle_args args; + + args.np = np; + args.args_count = 0; + child_domain = of_genpd_get_from_provider(&args); + if (!child_domain) + continue; + + if (of_parse_phandle_with_args(np, "power-domains", + "#power-domain-cells", 0, &args) != 0) + continue; + + parent_domain = of_genpd_get_from_provider(&args); + if (!parent_domain) + continue; + + if (pm_genpd_add_subdomain(parent_domain, child_domain)) + pr_warn("%s failed to add subdomain: %s\n", + parent_domain->name, child_domain->name); + else + pr_info("%s has as child subdomain: %s.\n", + parent_domain->name, child_domain->name); + of_node_put(np); + } + return 0; } arch_initcall(exynos4_pm_init_power_domain); diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 52e2b1a..318d127 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -87,8 +87,8 @@ static unsigned int exynos_pmu_spare3; static u32 exynos_irqwake_intmask = 0xffffffff; static const struct exynos_wkup_irq exynos3250_wkup_irq[] = { - { 73, BIT(1) }, /* RTC alarm */ - { 74, BIT(2) }, /* RTC tick */ + { 105, BIT(1) }, /* RTC alarm */ + { 106, BIT(2) }, /* RTC tick */ { /* sentinel */ }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 92afb72..355b089 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1692,16 +1692,15 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) if (ret == -EBUSY) pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name); - if (!ret) { + if (oh->clkdm) { /* * Set the clockdomain to HW_AUTO, assuming that the * previous state was HW_AUTO. */ - if (oh->clkdm && hwsup) + if (hwsup) clkdm_allow_idle(oh->clkdm); - } else { - if (oh->clkdm) - clkdm_hwmod_disable(oh->clkdm, oh); + + clkdm_hwmod_disable(oh->clkdm, oh); } return ret; @@ -2698,6 +2697,7 @@ static int __init _register(struct omap_hwmod *oh) INIT_LIST_HEAD(&oh->master_ports); INIT_LIST_HEAD(&oh->slave_ports); spin_lock_init(&oh->_lock); + lockdep_set_class(&oh->_lock, &oh->hwmod_key); oh->_state = _HWMOD_STATE_REGISTERED; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 9d4bec6e..9611c91 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -674,6 +674,7 @@ struct omap_hwmod { u32 _sysc_cache; void __iomem *_mpu_rt_va; spinlock_t _lock; + struct lock_class_key hwmod_key; /* unique lock class */ struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; unsigned int (*xlate_irq)(unsigned int); diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index e8692e7..16fe7a1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1466,55 +1466,18 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = { * */ -static struct omap_hwmod_class dra7xx_pcie_hwmod_class = { +static struct omap_hwmod_class dra7xx_pciess_hwmod_class = { .name = "pcie", }; /* pcie1 */ -static struct omap_hwmod dra7xx_pcie1_hwmod = { +static struct omap_hwmod dra7xx_pciess1_hwmod = { .name = "pcie1", - .class = &dra7xx_pcie_hwmod_class, + .class = &dra7xx_pciess_hwmod_class, .clkdm_name = "pcie_clkdm", .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { - .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* pcie2 */ -static struct omap_hwmod dra7xx_pcie2_hwmod = { - .name = "pcie2", - .class = &dra7xx_pcie_hwmod_class, - .clkdm_name = "pcie_clkdm", - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'PCIE PHY' class - * - */ - -static struct omap_hwmod_class dra7xx_pcie_phy_hwmod_class = { - .name = "pcie-phy", -}; - -/* pcie1 phy */ -static struct omap_hwmod dra7xx_pcie1_phy_hwmod = { - .name = "pcie1-phy", - .class = &dra7xx_pcie_phy_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET, .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET, .modulemode = MODULEMODE_SWCTRL, @@ -1522,11 +1485,11 @@ static struct omap_hwmod dra7xx_pcie1_phy_hwmod = { }, }; -/* pcie2 phy */ -static struct omap_hwmod dra7xx_pcie2_phy_hwmod = { - .name = "pcie2-phy", - .class = &dra7xx_pcie_phy_hwmod_class, - .clkdm_name = "l3init_clkdm", +/* pcie2 */ +static struct omap_hwmod dra7xx_pciess2_hwmod = { + .name = "pcie2", + .class = &dra7xx_pciess_hwmod_class, + .clkdm_name = "pcie_clkdm", .main_clk = "l4_root_clk_div", .prcm = { .omap4 = { @@ -2877,50 +2840,34 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> pcie1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie1 = { +/* l3_main_1 -> pciess1 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = { .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pcie1_hwmod, + .slave = &dra7xx_pciess1_hwmod, .clk = "l3_iclk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> pcie1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = { +/* l4_cfg -> pciess1 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = { .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie1_hwmod, + .slave = &dra7xx_pciess1_hwmod, .clk = "l4_root_clk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> pcie2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pcie2 = { +/* l3_main_1 -> pciess2 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = { .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pcie2_hwmod, + .slave = &dra7xx_pciess2_hwmod, .clk = "l3_iclk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> pcie2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pcie1 phy */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie1_phy_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pcie2 phy */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2_phy = { +/* l4_cfg -> pciess2 */ +static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = { .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pcie2_phy_hwmod, + .slave = &dra7xx_pciess2_hwmod, .clk = "l4_root_clk_div", .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3327,12 +3274,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_cfg__mpu, &dra7xx_l4_cfg__ocp2scp1, &dra7xx_l4_cfg__ocp2scp3, - &dra7xx_l3_main_1__pcie1, - &dra7xx_l4_cfg__pcie1, - &dra7xx_l3_main_1__pcie2, - &dra7xx_l4_cfg__pcie2, - &dra7xx_l4_cfg__pcie1_phy, - &dra7xx_l4_cfg__pcie2_phy, + &dra7xx_l3_main_1__pciess1, + &dra7xx_l4_cfg__pciess1, + &dra7xx_l3_main_1__pciess2, + &dra7xx_l4_cfg__pciess2, &dra7xx_l3_main_1__qspi, &dra7xx_l4_per3__rtcss, &dra7xx_l4_cfg__sata, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 190fa43..e642b07 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -173,6 +173,7 @@ static void __init omap3_igep0030_rev_g_legacy_init(void) static void __init omap3_evm_legacy_init(void) { + hsmmc2_internal_input_clk(); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149); } diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index a08a617..d6d6bc3 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -252,10 +252,10 @@ static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQSTATUS_MPU_OFFSET); + OMAP4_PRM_IRQENABLE_MPU_OFFSET); saved_mask[1] = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, - OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET); + OMAP4_PRM_IRQENABLE_MPU_2_OFFSET); omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 483cb46..a0f3b1c 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -45,6 +45,6 @@ extern char secondary_trampoline, secondary_trampoline_end; extern unsigned long socfpga_cpu1start_addr; -#define SOCFPGA_SCU_VIRT_BASE 0xfffec000 +#define SOCFPGA_SCU_VIRT_BASE 0xfee00000 #endif diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 383d61e..f5e597c 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -23,6 +23,7 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/cacheflush.h> #include "core.h" @@ -73,6 +74,10 @@ void __init socfpga_sysmgr_init(void) (u32 *) &socfpga_cpu1start_addr)) pr_err("SMP: Need cpu1-start-addr in device tree.\n"); + /* Ensure that socfpga_cpu1start_addr is visible to other CPUs */ + smp_wmb(); + sync_cache_w(&socfpga_cpu1start_addr); + sys_manager_base_addr = of_iomap(np, 0); np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr"); diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index b067390..b373aca 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -18,6 +18,7 @@ static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", "st,stih407", + "st,stih410", "st,stih418", NULL }; |