diff options
Diffstat (limited to 'arch/arm')
65 files changed, 2691 insertions, 637 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c62558..f4c2dde 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -115,10 +115,14 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3430-sdp.dtb \ omap3-beagle.dtb \ + omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ + omap3-igep0020.dtb \ + omap3-igep0030.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 11b240c..5302f79 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -43,7 +43,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -59,27 +59,27 @@ led@2 { label = "beaglebone:green:heartbeat"; - gpios = <&gpio2 21 0>; + gpios = <&gpio1 21 0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { label = "beaglebone:green:mmc0"; - gpios = <&gpio2 22 0>; + gpios = <&gpio1 22 0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "beaglebone:green:usr2"; - gpios = <&gpio2 23 0>; + gpios = <&gpio1 23 0>; default-state = "off"; }; led@5 { label = "beaglebone:green:usr3"; - gpios = <&gpio2 24 0>; + gpios = <&gpio1 24 0>; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index d649644..0423298 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -51,7 +51,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -60,7 +60,7 @@ }; }; - i2c2: i2c@4802a000 { + i2c1: i2c@4802a000 { status = "okay"; clock-frequency = <100000>; @@ -123,12 +123,12 @@ debounce-delay-ms = <5>; col-scan-delay-us = <2>; - row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ - &gpio2 26 0 /* Bank1, pin26 */ - &gpio2 27 0>; /* Bank1, pin27 */ + row-gpios = <&gpio1 25 0 /* Bank1, pin25 */ + &gpio1 26 0 /* Bank1, pin26 */ + &gpio1 27 0>; /* Bank1, pin27 */ - col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ - &gpio2 22 0>; /* Bank1, pin22 */ + col-gpios = <&gpio1 21 0 /* Bank1, pin21 */ + &gpio1 22 0>; /* Bank1, pin22 */ linux,keymap = <0x0000008b /* MENU */ 0x0100009e /* BACK */ @@ -147,14 +147,14 @@ switch@9 { label = "volume-up"; linux,code = <115>; - gpios = <&gpio1 2 1>; + gpios = <&gpio0 2 1>; gpio-key,wakeup; }; switch@10 { label = "volume-down"; linux,code = <114>; - gpios = <&gpio1 3 1>; + gpios = <&gpio0 3 1>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index f5a6162..f67c360 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -58,7 +58,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -115,26 +115,26 @@ led@1 { label = "evmsk:green:usr0"; - gpios = <&gpio2 4 0>; + gpios = <&gpio1 4 0>; default-state = "off"; }; led@2 { label = "evmsk:green:usr1"; - gpios = <&gpio2 5 0>; + gpios = <&gpio1 5 0>; default-state = "off"; }; led@3 { label = "evmsk:green:mmc0"; - gpios = <&gpio2 6 0>; + gpios = <&gpio1 6 0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "evmsk:green:heartbeat"; - gpios = <&gpio2 7 0>; + gpios = <&gpio1 7 0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; @@ -148,26 +148,26 @@ switch@1 { label = "button0"; linux,code = <0x100>; - gpios = <&gpio3 3 0>; + gpios = <&gpio2 3 0>; }; switch@2 { label = "button1"; linux,code = <0x101>; - gpios = <&gpio3 2 0>; + gpios = <&gpio2 2 0>; }; switch@3 { label = "button2"; linux,code = <0x102>; - gpios = <&gpio1 30 0>; + gpios = <&gpio0 30 0>; gpio-key,wakeup; }; switch@4 { label = "button3"; linux,code = <0x103>; - gpios = <&gpio3 5 0>; + gpios = <&gpio2 5 0>; }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0957645..df62830 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -21,6 +21,8 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + d_can0 = &dcan0; + d_can1 = &dcan1; }; cpus { @@ -87,7 +89,7 @@ reg = <0x48200000 0x1000>; }; - gpio1: gpio@44e07000 { + gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; gpio-controller; @@ -98,7 +100,7 @@ interrupts = <96>; }; - gpio2: gpio@4804c000 { + gpio1: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; @@ -109,7 +111,7 @@ interrupts = <98>; }; - gpio3: gpio@481ac000 { + gpio2: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; @@ -120,7 +122,7 @@ interrupts = <32>; }; - gpio4: gpio@481ae000 { + gpio3: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; @@ -185,7 +187,7 @@ status = "disabled"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -195,7 +197,7 @@ status = "disabled"; }; - i2c2: i2c@4802a000 { + i2c1: i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -205,7 +207,7 @@ status = "disabled"; }; - i2c3: i2c@4819c000 { + i2c2: i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -225,7 +227,8 @@ dcan0: d_can@481cc000 { compatible = "bosch,d_can"; ti,hwmods = "d_can0"; - reg = <0x481cc000 0x2000>; + reg = <0x481cc000 0x2000 + 0x44e10644 0x4>; interrupts = <52>; status = "disabled"; }; @@ -233,13 +236,14 @@ dcan1: d_can@481d0000 { compatible = "bosch,d_can"; ti,hwmods = "d_can1"; - reg = <0x481d0000 0x2000>; + reg = <0x481d0000 0x2000 + 0x44e10644 0x4>; interrupts = <55>; status = "disabled"; }; timer1: timer@44e31000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer-1ms"; reg = <0x44e31000 0x400>; interrupts = <67>; ti,hwmods = "timer1"; @@ -247,21 +251,21 @@ }; timer2: timer@48040000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48040000 0x400>; interrupts = <68>; ti,hwmods = "timer2"; }; timer3: timer@48042000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48042000 0x400>; interrupts = <69>; ti,hwmods = "timer3"; }; timer4: timer@48044000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48044000 0x400>; interrupts = <92>; ti,hwmods = "timer4"; @@ -269,7 +273,7 @@ }; timer5: timer@48046000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48046000 0x400>; interrupts = <93>; ti,hwmods = "timer5"; @@ -277,7 +281,7 @@ }; timer6: timer@48048000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48048000 0x400>; interrupts = <94>; ti,hwmods = "timer6"; @@ -285,7 +289,7 @@ }; timer7: timer@4804a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x4804a000 0x400>; interrupts = <95>; ti,hwmods = "timer7"; @@ -305,7 +309,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x48030000 0x400>; - interrupt = <65>; + interrupts = <65>; ti,spi-num-cs = <2>; ti,hwmods = "spi0"; status = "disabled"; @@ -316,7 +320,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x481a0000 0x400>; - interrupt = <125>; + interrupts = <125>; ti,spi-num-cs = <2>; ti,hwmods = "spi1"; status = "disabled"; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 474f760..e9b5bda 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TI AM3517 EVM (AM3517/05)"; diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index 5eb26d7..5568683 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TeeJet Mt.Ventoux"; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 761c4b6..37aa748 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -26,6 +26,11 @@ }; }; + pmu { + compatible = "arm,arm1136-pmu"; + interrupts = <3>; + }; + soc { compatible = "ti,omap-infra"; mpu { @@ -49,6 +54,18 @@ reg = <0x480FE000 0x1000>; }; + sdma: dma-controller@48056000 { + compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; + reg = <0x48056000 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <64>; + }; + uart1: serial@4806a000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart1"; @@ -68,28 +85,28 @@ }; timer2: timer@4802a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4802a000 0x400>; interrupts = <38>; ti,hwmods = "timer2"; }; timer3: timer@48078000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48078000 0x400>; interrupts = <39>; ti,hwmods = "timer3"; }; timer4: timer@4807a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4807a000 0x400>; interrupts = <40>; ti,hwmods = "timer4"; }; timer5: timer@4807c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4807c000 0x400>; interrupts = <41>; ti,hwmods = "timer5"; @@ -97,7 +114,7 @@ }; timer6: timer@4807e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4807e000 0x400>; interrupts = <42>; ti,hwmods = "timer6"; @@ -105,7 +122,7 @@ }; timer7: timer@48080000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48080000 0x400>; interrupts = <43>; ti,hwmods = "timer7"; @@ -113,7 +130,7 @@ }; timer8: timer@48082000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48082000 0x400>; interrupts = <44>; ti,hwmods = "timer8"; @@ -121,7 +138,7 @@ }; timer9: timer@48084000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48084000 0x400>; interrupts = <45>; ti,hwmods = "timer9"; @@ -129,7 +146,7 @@ }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48086000 0x400>; interrupts = <46>; ti,hwmods = "timer10"; @@ -137,7 +154,7 @@ }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48088000 0x400>; interrupts = <47>; ti,hwmods = "timer11"; @@ -145,7 +162,7 @@ }; timer12: timer@4808a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4808a000 0x400>; interrupts = <48>; ti,hwmods = "timer12"; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 9b0d077..68282ee 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -18,3 +18,49 @@ reg = <0x80000000 0x4000000>; /* 64 MB */ }; }; + +&gpmc { + ranges = <0 0 0x08000000 0x04000000>; + + nor@0,0 { + compatible = "cfi-flash"; + linux,mtd-name= "intel,ge28f256l18b85"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x04000000>; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <10>; + gpmc,cs-rd-off-ns = <160>; + gpmc,cs-wr-off-ns = <160>; + gpmc,adv-on-ns = <20>; + gpmc,adv-rd-off-ns = <50>; + gpmc,adv-wr-off-ns = <50>; + gpmc,oe-on-ns = <60>; + gpmc,oe-off-ns = <120>; + gpmc,we-on-ns = <60>; + gpmc,we-off-ns = <120>; + gpmc,rd-cycle-ns = <170>; + gpmc,wr-cycle-ns = <170>; + gpmc,access-ns = <150>; + gpmc,page-burst-access-ns = <10>; + + partition@0 { + label = "bootloader"; + reg = <0 0x20000>; + }; + partition@0x20000 { + label = "params"; + reg = <0x20000 0x20000>; + }; + partition@0x40000 { + label = "kernel"; + reg = <0x40000 0x200000>; + }; + partition@0x240000 { + label = "file-system"; + reg = <0x240000 0x3dc0000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index af65609..da5b285 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -29,6 +29,65 @@ pinctrl-single,function-mask = <0x3f>; }; + gpio1: gpio@48018000 { + compatible = "ti,omap2-gpio"; + reg = <0x48018000 0x200>; + interrupts = <29>; + ti,hwmods = "gpio1"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@4801a000 { + compatible = "ti,omap2-gpio"; + reg = <0x4801a000 0x200>; + interrupts = <30>; + ti,hwmods = "gpio2"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@4801c000 { + compatible = "ti,omap2-gpio"; + reg = <0x4801c000 0x200>; + interrupts = <31>; + ti,hwmods = "gpio3"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@4801e000 { + compatible = "ti,omap2-gpio"; + reg = <0x4801e000 0x200>; + interrupts = <32>; + ti,hwmods = "gpio4"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpmc: gpmc@6800a000 { + compatible = "ti,omap2420-gpmc"; + reg = <0x6800a000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; + }; + mcbsp1: mcbsp@48074000 { compatible = "ti,omap2420-mcbsp"; reg = <0x48074000 0xff>; @@ -37,6 +96,9 @@ <60>; /* RX interrupt */ interrupt-names = "tx", "rx"; ti,hwmods = "mcbsp1"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@48076000 { @@ -47,10 +109,13 @@ <63>; /* RX interrupt */ interrupt-names = "tx", "rx"; ti,hwmods = "mcbsp2"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; timer1: timer@48028000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; interrupts = <37>; ti,hwmods = "timer1"; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index c392445..054bc44 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -29,6 +29,76 @@ pinctrl-single,function-mask = <0x3f>; }; + gpio1: gpio@4900c000 { + compatible = "ti,omap2-gpio"; + reg = <0x4900c000 0x200>; + interrupts = <29>; + ti,hwmods = "gpio1"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@4900e000 { + compatible = "ti,omap2-gpio"; + reg = <0x4900e000 0x200>; + interrupts = <30>; + ti,hwmods = "gpio2"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@49010000 { + compatible = "ti,omap2-gpio"; + reg = <0x49010000 0x200>; + interrupts = <31>; + ti,hwmods = "gpio3"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@49012000 { + compatible = "ti,omap2-gpio"; + reg = <0x49012000 0x200>; + interrupts = <32>; + ti,hwmods = "gpio4"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio5: gpio@480b6000 { + compatible = "ti,omap2-gpio"; + reg = <0x480b6000 0x200>; + interrupts = <33>; + ti,hwmods = "gpio5"; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpmc: gpmc@6e000000 { + compatible = "ti,omap2430-gpmc"; + reg = <0x6e000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; + }; + mcbsp1: mcbsp@48074000 { compatible = "ti,omap2430-mcbsp"; reg = <0x48074000 0xff>; @@ -40,6 +110,9 @@ interrupt-names = "common", "tx", "rx", "rx_overflow"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@48076000 { @@ -52,6 +125,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@4808c000 { @@ -64,6 +140,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp4: mcbsp@4808e000 { @@ -76,6 +155,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; mcbsp5: mcbsp@48096000 { @@ -88,10 +170,13 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; + dmas = <&sdma 21>, + <&sdma 22>; + dma-names = "tx", "rx"; }; timer1: timer@49018000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; interrupts = <37>; ti,hwmods = "timer1"; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 3705a81..5a31964 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -13,6 +13,12 @@ model = "TI OMAP3 BeagleBoard xM"; compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ @@ -20,10 +26,6 @@ leds { compatible = "gpio-leds"; - pmu_stat { - label = "beagleboard::pmu_stat"; - gpios = <&twl_gpio 19 0>; /* LEDB */ - }; heartbeat { label = "beagleboard::usr0"; @@ -38,6 +40,16 @@ }; }; + pwmleds { + compatible = "pwm-leds"; + + pmu_stat { + label = "beagleboard::pmu_stat"; + pwms = <&twl_pwmled 1 7812500>; + max-brightness = <127>; + }; + }; + sound { compatible = "ti,omap-twl4030"; ti,model = "omap3beagle"; @@ -107,3 +119,9 @@ */ ti,pulldowns = <0x03a1c4>; }; + +&usb_otg_hs { + interface-type = <0>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index f624dc8..6eec699 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -7,12 +7,18 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TI OMAP3 BeagleBoard"; compatible = "ti,omap3-beagle", "ti,omap3"; + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -38,6 +44,57 @@ }; }; + /* HS USB Port 2 RESET */ + hsusb2_reset: hsusb2_reset_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_reset"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 19 0>; /* gpio_147 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-supply = <&hsusb2_reset>; + vcc-supply = <&hsusb2_power>; + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + >; + + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < + 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */ + 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */ + 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */ + 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */ + 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */ + 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */ + 0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */ + 0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */ + 0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */ + 0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */ + 0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */ + 0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */ + >; + }; }; &i2c1 { @@ -65,3 +122,23 @@ &mmc3 { status = "disabled"; }; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts new file mode 100644 index 0000000..8a5cdcc --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -0,0 +1,169 @@ +/* + * Author: Anil Kumar <anilk4.v@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap34xx.dtsi" +/ { + model = "TimLL OMAP3 Devkit8000"; + compatible = "timll,omap3-devkit8000", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + label = "devkit8000::led1"; + gpios = <&gpio6 26 0>; /* 186 -> LED1 */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "devkit8000::led2"; + gpios = <&gpio6 3 0>; /* 163 -> LED2 */ + default-state = "on"; + linux,default-trigger = "none"; + }; + + usr { + label = "devkit8000::led3"; + gpios = <&gpio6 4 0>; /* 164 -> LED3 */ + default-state = "on"; + linux,default-trigger = "usr"; + }; + + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "devkit8000"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + ti,audio-routing = + "Ext Spk", "PREDRIVEL", + "Ext Spk", "PREDRIVER", + "MAINMIC", "Main Mic", + "Main Mic", "Mic Bias 1"; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&wdt2 { + status = "disabled"; +}; + +&mcbsp1 { + status = "disabled"; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&mcbsp4 { + status = "disabled"; +}; + +&mcbsp5 { + status = "disabled"; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + + gpmc,sync-clk = <0>; + gpmc,cs-on = <0>; + gpmc,cs-rd-off = <44>; + gpmc,cs-wr-off = <44>; + gpmc,adv-on = <6>; + gpmc,adv-rd-off = <34>; + gpmc,adv-wr-off = <44>; + gpmc,we-off = <40>; + gpmc,oe-off = <54>; + gpmc,access = <64>; + gpmc,rd-cycle = <82>; + gpmc,wr-cycle = <82>; + gpmc,wr-access = <40>; + gpmc,wr-data-mux-bus = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index e8ba1c2..05f51e1 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -7,12 +7,18 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)"; compatible = "ti,omap3-evm", "ti,omap3"; + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -59,3 +65,9 @@ &twl_gpio { ti,use-leds; }; + +&usb_otg_hs { + interface-type = <0>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi new file mode 100644 index 0000000..f8fe3b7 --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -0,0 +1,122 @@ +/* + * Device Tree Source for IGEP Technology devices + * + * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap34xx.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "igep2"; + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; +}; + +&omap3_pmx_core { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */ + 0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */ + 0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */ + 0x170 0 /* uart3_tx.uart3_tx OUTPUT | MODE0 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 0x0118 /* sdmmc1_clk.sdmmc1_clk INPUT PULLUP | MODE 0 */ + 0x116 0x0118 /* sdmmc1_cmd.sdmmc1_cmd INPUT PULLUP | MODE 0 */ + 0x118 0x0118 /* sdmmc1_dat0.sdmmc1_dat0 INPUT PULLUP | MODE 0 */ + 0x11a 0x0118 /* sdmmc1_dat1.sdmmc1_dat1 INPUT PULLUP | MODE 0 */ + 0x11c 0x0118 /* sdmmc1_dat2.sdmmc1_dat2 INPUT PULLUP | MODE 0 */ + 0x11e 0x0118 /* sdmmc1_dat3.sdmmc1_dat3 INPUT PULLUP | MODE 0 */ + 0x120 0x0100 /* sdmmc1_dat4.sdmmc1_dat4 INPUT | MODE 0 */ + 0x122 0x0100 /* sdmmc1_dat5.sdmmc1_dat5 INPUT | MODE 0 */ + 0x124 0x0100 /* sdmmc1_dat6.sdmmc1_dat6 INPUT | MODE 0 */ + 0x126 0x0100 /* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts new file mode 100644 index 0000000..e2b9849 --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -0,0 +1,56 @@ +/* + * Device Tree Source for IGEPv2 board + * + * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "omap3-igep.dtsi" + +/ { + model = "IGEPv2"; + compatible = "isee,omap3-igep0020", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + boot { + label = "omap3:green:boot"; + gpios = <&gpio1 26 0>; + default-state = "on"; + }; + + user0 { + label = "omap3:red:user0"; + gpios = <&gpio1 27 0>; + default-state = "off"; + }; + + user1 { + label = "omap3:red:user1"; + gpios = <&gpio1 28 0>; + default-state = "off"; + }; + + user2 { + label = "omap3:green:user1"; + gpios = <&twl_gpio 19 1>; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in the EEPROM + * as EDID data. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts new file mode 100644 index 0000000..9dc48d2 --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -0,0 +1,44 @@ +/* + * Device Tree Source for IGEP COM Module + * + * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "omap3-igep.dtsi" + +/ { + model = "IGEP COM Module"; + compatible = "isee,omap3-igep0030", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + boot { + label = "omap3:green:boot"; + gpios = <&twl_gpio 13 1>; + default-state = "on"; + }; + + user0 { + label = "omap3:red:user0"; + gpios = <&twl_gpio 18 1>; /* LEDA */ + default-state = "off"; + }; + + user1 { + label = "omap3:green:user1"; + gpios = <&twl_gpio 19 1>; /* LEDB */ + default-state = "off"; + }; + + user2 { + label = "omap3:red:user1"; + gpios = <&gpio1 16 1>; + default-state = "off"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index 89808ce..d4a7280d 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -11,17 +11,26 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { - leds { - compatible = "gpio-leds"; + pwmleds { + compatible = "pwm-leds"; + overo { label = "overo:blue:COM"; - gpios = <&twl_gpio 19 0>; - linux,default-trigger = "mmc0"; + pwms = <&twl_pwmled 1 7812500>; + max-brightness = <127>; }; }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "overo"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; }; &i2c1 { @@ -31,6 +40,12 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -55,3 +70,9 @@ &twl_gpio { ti,use-leds; }; + +&usb_otg_hs { + interface-type = <0>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 1acc261..559b02f 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -26,6 +26,12 @@ }; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + ti,hwmods = "debugss"; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -75,6 +81,18 @@ reg = <0x48200000 0x1000>; }; + sdma: dma-controller@48056000 { + compatible = "ti,omap3630-sdma", "ti,omap3430-sdma"; + reg = <0x48056000 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <96>; + }; + omap3_pmx_core: pinmux@48002030 { compatible = "ti,omap3-padconf", "pinctrl-single"; reg = <0x48002030 0x05cc>; @@ -95,56 +113,69 @@ gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; + reg = <0x48310000 0x200>; + interrupts = <29>; ti,hwmods = "gpio1"; + ti,gpio-always-on; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@49050000 { compatible = "ti,omap3-gpio"; + reg = <0x49050000 0x200>; + interrupts = <30>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@49052000 { compatible = "ti,omap3-gpio"; + reg = <0x49052000 0x200>; + interrupts = <31>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@49054000 { compatible = "ti,omap3-gpio"; + reg = <0x49054000 0x200>; + interrupts = <32>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@49056000 { compatible = "ti,omap3-gpio"; + reg = <0x49056000 0x200>; + interrupts = <33>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@49058000 { compatible = "ti,omap3-gpio"; + reg = <0x49058000 0x200>; + interrupts = <34>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; uart1: serial@4806a000 { @@ -192,6 +223,16 @@ #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; }; mcspi2: spi@4809a000 { @@ -200,6 +241,11 @@ #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; }; mcspi3: spi@480b8000 { @@ -208,6 +254,11 @@ #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; + dmas = <&sdma 15>, + <&sdma 16>, + <&sdma 23>, + <&sdma 24>; + dma-names = "tx0", "rx0", "tx1", "rx1"; }; mcspi4: spi@480ba000 { @@ -216,22 +267,30 @@ #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; }; mmc1: mmc@4809c000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc1"; ti,dual-volt; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; }; mmc2: mmc@480b4000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc2"; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; }; mmc3: mmc@480ad000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc3"; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; }; wdt2: wdt@48314000 { @@ -249,6 +308,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@49022000 { @@ -263,6 +325,9 @@ interrupt-names = "common", "tx", "rx", "sidetone"; ti,buffer-size = <1280>; ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@49024000 { @@ -277,6 +342,9 @@ interrupt-names = "common", "tx", "rx", "sidetone"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp4: mcbsp@49026000 { @@ -289,6 +357,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; mcbsp5: mcbsp@48096000 { @@ -301,10 +372,13 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; + dmas = <&sdma 21>, + <&sdma 22>; + dma-names = "tx", "rx"; }; timer1: timer@48318000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; interrupts = <37>; ti,hwmods = "timer1"; @@ -312,28 +386,28 @@ }; timer2: timer@49032000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49032000 0x400>; interrupts = <38>; ti,hwmods = "timer2"; }; timer3: timer@49034000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49034000 0x400>; interrupts = <39>; ti,hwmods = "timer3"; }; timer4: timer@49036000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49036000 0x400>; interrupts = <40>; ti,hwmods = "timer4"; }; timer5: timer@49038000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49038000 0x400>; interrupts = <41>; ti,hwmods = "timer5"; @@ -341,7 +415,7 @@ }; timer6: timer@4903a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4903a000 0x400>; interrupts = <42>; ti,hwmods = "timer6"; @@ -349,7 +423,7 @@ }; timer7: timer@4903c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4903c000 0x400>; interrupts = <43>; ti,hwmods = "timer7"; @@ -357,7 +431,7 @@ }; timer8: timer@4903e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4903e000 0x400>; interrupts = <44>; ti,hwmods = "timer8"; @@ -366,7 +440,7 @@ }; timer9: timer@49040000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49040000 0x400>; interrupts = <45>; ti,hwmods = "timer9"; @@ -374,7 +448,7 @@ }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48086000 0x400>; interrupts = <46>; ti,hwmods = "timer10"; @@ -382,7 +456,7 @@ }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48088000 0x400>; interrupts = <47>; ti,hwmods = "timer11"; @@ -390,12 +464,65 @@ }; timer12: timer@48304000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48304000 0x400>; interrupts = <95>; ti,hwmods = "timer12"; ti,timer-alwon; ti,timer-secure; }; + + usbhstll: usbhstll@48062000 { + compatible = "ti,usbhs-tll"; + reg = <0x48062000 0x1000>; + interrupts = <78>; + ti,hwmods = "usb_tll_hs"; + }; + + usbhshost: usbhshost@48064000 { + compatible = "ti,usbhs-host"; + reg = <0x48064000 0x400>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@48064400 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x48064400 0x400>; + interrupt-parent = <&intc>; + interrupts = <76>; + }; + + usbhsehci: ehci@48064800 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x48064800 0x400>; + interrupt-parent = <&intc>; + interrupts = <77>; + }; + }; + + gpmc: gpmc@6e000000 { + compatible = "ti,omap3430-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x6e000000 0x02d0>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + #address-cells = <2>; + #size-cells = <1>; + }; + + usb_otg_hs: usb_otg_hs@480ab000 { + compatible = "ti,omap3-musb"; + reg = <0x480ab000 0x1000>; + interrupts = <0 92 0x4>, <0 93 0x4>; + interrupt-names = "mc", "dma"; + ti,hwmods = "usb_otg_hs"; + usb-phy = <&usb2_phy>; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + }; }; }; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts new file mode 100644 index 0000000..144ae43 --- /dev/null +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -0,0 +1,190 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap34xx.dtsi" + +/ { + model = "TI OMAP3430 SDP"; + compatible = "ti,omap3430-sdp", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + }; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&gpmc { + ranges = <0 0 0x10000000 0x08000000>, + <1 0 0x28000000 0x08000000>, + <2 0 0x20000000 0x10000000>; + + nor@0,0 { + compatible = "cfi-flash"; + linux,mtd-name= "intel,pf48f6000m0y1be"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x08000000>; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + + partition@0 { + label = "bootloader-nor"; + reg = <0 0x40000>; + }; + partition@0x40000 { + label = "params-nor"; + reg = <0x40000 0x40000>; + }; + partition@0x80000 { + label = "kernel-nor"; + reg = <0x80000 0x200000>; + }; + partition@0x280000 { + label = "filesystem-nor"; + reg = <0x240000 0x7d80000>; + }; + }; + + nand@1,0 { + linux,mtd-name= "micron,mt29f1g08abb"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1 0 0x08000000>; + nand-bus-width = <8>; + + ti,nand-ecc-opt = "sw"; + gpmc,device-nand; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + partition@0 { + label = "xloader-nand"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "bootloader-nand"; + reg = <0x80000 0x140000>; + }; + partition@0x1c0000 { + label = "params-nand"; + reg = <0x1c0000 0xc0000>; + }; + partition@0x280000 { + label = "kernel-nand"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "filesystem-nand"; + reg = <0x780000 0x7880000>; + }; + }; + + onenand@2,0 { + linux,mtd-name= "samsung,kfm2g16q2m-deb8"; + #address-cells = <1>; + #size-cells = <1>; + reg = <2 0 0x10000000>; + + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <84>; + gpmc,cs-wr-off-ns = <72>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <18>; + gpmc,adv-wr-off-ns = <18>; + gpmc,oe-on-ns = <30>; + gpmc,oe-off-ns = <84>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <42>; + gpmc,rd-cycle-ns = <108>; + gpmc,wr-cycle-ns = <96>; + gpmc,access-ns = <78>; + gpmc,wr-data-mux-bus-ns = <30>; + + partition@0 { + label = "xloader-onenand"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "bootloader-onenand"; + reg = <0x80000 0x40000>; + }; + partition@0xc0000 { + label = "params-onenand"; + reg = <0xc0000 0x20000>; + }; + partition@0xe0000 { + label = "kernel-onenand"; + reg = <0xe0000 0x200000>; + }; + partition@0x2e0000 { + label = "filesystem-onenand"; + reg = <0x2e0000 0xfd20000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi new file mode 100644 index 0000000..75ed4ae --- /dev/null +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -0,0 +1,28 @@ +/* + * Device Tree Source for OMAP34xx/OMAP35xx SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap3.dtsi" + +/ { + cpus { + cpu@0 { + /* OMAP343x/OMAP35xx variants OPP1-5 */ + operating-points = < + /* kHz uV */ + 125000 975000 + 250000 1075000 + 500000 1200000 + 550000 1270000 + 600000 1350000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; +}; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 96bf028..b89233e 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -15,6 +15,19 @@ serial3 = &uart4; }; + cpus { + /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */ + cpu@0 { + operating-points = < + /* kHz uV */ + 300000 975000 + 600000 1075000 + 800000 1200000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; + ocp { uart4: serial@49042000 { compatible = "ti,omap3-uart"; diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 75466d2..e30cdf0 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -5,7 +5,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/include/ "omap4-panda.dts" +/dts-v1/; + +/include/ "omap443x.dtsi" +/include/ "omap4-panda-common.dtsi" /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi new file mode 100644 index 0000000..03bd60d --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -0,0 +1,251 @@ +/* + * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "elpida_ecb240abacn.dtsi" + +/ { + model = "TI OMAP4 PandaBoard"; + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "pandaboard::status1"; + gpios = <&gpio1 7 0>; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "pandaboard::status2"; + gpios = <&gpio1 8 0>; + linux,default-trigger = "mmc0"; + }; + }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "PandaBoard"; + + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &mcbsp1_pins + &dss_hdmi_pins + &tpd12s015_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ + 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ + 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ + 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ + 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ + 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ + 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ + 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ + 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */ + 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */ + 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in their EEPROM as EDID data. + * The EEPROM is connected as I2C slave device. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + clock-frequency = <400000>; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + ti,non-removable; + bus-width = <4>; +}; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&mcbsp2 { + status = "disabled"; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&dmic { + status = "disabled"; +}; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 73bc1a6..f1d8c21 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -5,7 +5,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/include/ "omap4-panda.dts" +/dts-v1/; + +/include/ "omap4460.dtsi" +/include/ "omap4-panda-common.dtsi" /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 4122efe..f8b221f 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -7,202 +7,5 @@ */ /dts-v1/; -/include/ "omap4.dtsi" -/include/ "elpida_ecb240abacn.dtsi" - -/ { - model = "TI OMAP4 PandaBoard"; - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - leds { - compatible = "gpio-leds"; - heartbeat { - label = "pandaboard::status1"; - gpios = <&gpio1 7 0>; - linux,default-trigger = "heartbeat"; - }; - - mmc { - label = "pandaboard::status2"; - gpios = <&gpio1 8 0>; - linux,default-trigger = "mmc0"; - }; - }; - - sound: sound { - compatible = "ti,abe-twl6040"; - ti,model = "PandaBoard"; - - ti,mclk-freq = <38400000>; - - ti,mcpdm = <&mcpdm>; - - ti,twl6040 = <&twl6040>; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Ext Spk", "HFL", - "Ext Spk", "HFR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "HSMIC", "Headset Mic", - "Headset Mic", "Headset Mic Bias", - "AFML", "Line In", - "AFMR", "Line In"; - }; -}; - -&omap4_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &twl6040_pins - &mcpdm_pins - &mcbsp1_pins - &dss_hdmi_pins - &tpd12s015_pins - >; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ - 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ - >; - }; - - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ - 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ - 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ - 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ - 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ - 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ - 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ - 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ - >; - }; - - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ - 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ - 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ - 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ - 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ - >; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; - }; - - twl6040: twl@4b { - compatible = "ti,twl6040"; - reg = <0x4b>; - /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ - interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ - - vio-supply = <&v1v8>; - v2v1-supply = <&v2v1>; - enable-active-high; - }; -}; - -/include/ "twl6030.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <100000>; - - /* - * Display monitor features are burnt in their EEPROM as EDID data. - * The EEPROM is connected as I2C slave device. - */ - eeprom@50 { - compatible = "ti,eeprom"; - reg = <0x50>; - }; -}; - -&i2c4 { - clock-frequency = <400000>; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - ti,non-removable; - bus-width = <4>; -}; - -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&mcbsp2 { - status = "disabled"; -}; - -&mcbsp3 { - status = "disabled"; -}; - -&dmic { - status = "disabled"; -}; - -&twl_usb_comparator { - usb-supply = <&vusb>; -}; +/include/ "omap443x.dtsi" +/include/ "omap4-panda-common.dtsi" diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 43e5258..c387bdc 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap4.dtsi" +/include/ "omap443x.dtsi" /include/ "elpida_ecb240abacn.dtsi" / { @@ -80,6 +80,32 @@ }; }; + pwmleds { + compatible = "pwm-leds"; + kpad { + label = "omap4::keypad"; + pwms = <&twl_pwm 0 7812500>; + max-brightness = <127>; + }; + + charging { + label = "omap4:green:chrg"; + pwms = <&twl_pwmled 0 7812500>; + max-brightness = <255>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&twl_pwm 1 7812500>; + brightness-levels = < + 0 10 20 30 40 + 50 60 70 80 90 + 100 110 120 127 + >; + default-brightness-level = <13>; + }; + sound { compatible = "ti,abe-twl6040"; ti,model = "SDP4430"; @@ -212,9 +238,40 @@ 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ >; }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */ + 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */ + 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; twl: twl@48 { @@ -253,10 +310,16 @@ /include/ "twl6030.dtsi" &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; /* @@ -279,6 +342,9 @@ }; &i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; /* @@ -428,3 +494,9 @@ &twl_usb_comparator { usb-supply = <&vusb>; }; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts index 6601e6a..222a413 100644 --- a/arch/arm/boot/dts/omap4-var-som.dts +++ b/arch/arm/boot/dts/omap4-var-som.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap4.dtsi" +/include/ "omap443x.dtsi" / { model = "Variscite OMAP4 SOM"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 739bb79..2a56428 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -94,6 +94,11 @@ #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + reg = <0x44000000 0x1000>, + <0x44800000 0x2000>, + <0x45000000 0x1000>; + interrupts = <0 9 0x4>, + <0 10 0x4>; counter32k: counter@4a304000 { compatible = "ti,omap-counter32k"; @@ -118,15 +123,28 @@ pinctrl-single,function-mask = <0x7fff>; }; + sdma: dma-controller@4a056000 { + compatible = "ti,omap4430-sdma"; + reg = <0x4a056000 0x1000>; + interrupts = <0 12 0x4>, + <0 13 0x4>, + <0 14 0x4>, + <0 15 0x4>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; + }; + gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; reg = <0x4a310000 0x200>; interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; + ti,gpio-always-on; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -137,7 +155,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -148,7 +166,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -159,7 +177,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -170,7 +188,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -181,7 +199,18 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <0 20 0x4>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; }; uart1: serial@4806a000 { @@ -260,6 +289,16 @@ #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; }; mcspi2: spi@4809a000 { @@ -270,6 +309,11 @@ #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; }; mcspi3: spi@480b8000 { @@ -280,6 +324,8 @@ #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; }; mcspi4: spi@480ba000 { @@ -290,6 +336,8 @@ #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; }; mmc1: mmc@4809c000 { @@ -299,6 +347,8 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; }; mmc2: mmc@480b4000 { @@ -307,6 +357,8 @@ interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; }; mmc3: mmc@480ad000 { @@ -315,6 +367,8 @@ interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; }; mmc4: mmc@480d1000 { @@ -323,6 +377,8 @@ interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; }; mmc5: mmc@480d5000 { @@ -331,6 +387,8 @@ interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; }; wdt2: wdt@4a314000 { @@ -347,6 +405,9 @@ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; ti,hwmods = "mcpdm"; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; }; dmic: dmic@4012e000 { @@ -356,6 +417,8 @@ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; ti,hwmods = "dmic"; + dmas = <&sdma 67>; + dma-names = "up_link"; }; mcbsp1: mcbsp@40122000 { @@ -367,6 +430,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@40124000 { @@ -378,6 +444,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@40126000 { @@ -389,6 +458,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; mcbsp4: mcbsp@48096000 { @@ -399,6 +471,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; keypad: keypad@4a31c000 { @@ -438,10 +513,15 @@ #size-cells = <1>; ranges; ti,hwmods = "ocp2scp_usb_phy"; + usb2_phy: usb2phy@4a0ad080 { + compatible = "ti,omap-usb2"; + reg = <0x4a0ad080 0x58>; + ctrl-module = <&omap_control_usb>; + }; }; timer1: timer@4a318000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; interrupts = <0 37 0x4>; ti,hwmods = "timer1"; @@ -449,28 +529,28 @@ }; timer2: timer@48032000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48032000 0x80>; interrupts = <0 38 0x4>; ti,hwmods = "timer2"; }; timer3: timer@48034000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x48034000 0x80>; interrupts = <0 39 0x4>; ti,hwmods = "timer3"; }; timer4: timer@48036000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x48036000 0x80>; interrupts = <0 40 0x4>; ti,hwmods = "timer4"; }; timer5: timer@40138000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x40138000 0x80>, <0x49038000 0x80>; interrupts = <0 41 0x4>; @@ -479,7 +559,7 @@ }; timer6: timer@4013a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4013a000 0x80>, <0x4903a000 0x80>; interrupts = <0 42 0x4>; @@ -488,7 +568,7 @@ }; timer7: timer@4013c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4013c000 0x80>, <0x4903c000 0x80>; interrupts = <0 43 0x4>; @@ -497,7 +577,7 @@ }; timer8: timer@4013e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4013e000 0x80>, <0x4903e000 0x80>; interrupts = <0 44 0x4>; @@ -507,7 +587,7 @@ }; timer9: timer@4803e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; @@ -515,7 +595,7 @@ }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; @@ -523,11 +603,62 @@ }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x48088000 0x80>; interrupts = <0 47 0x4>; ti,hwmods = "timer11"; ti,timer-pwm; }; + + usbhstll: usbhstll@4a062000 { + compatible = "ti,usbhs-tll"; + reg = <0x4a062000 0x1000>; + interrupts = <0 78 0x4>; + ti,hwmods = "usb_tll_hs"; + }; + + usbhshost: usbhshost@4a064000 { + compatible = "ti,usbhs-host"; + reg = <0x4a064000 0x800>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x4a064800 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 76 0x4>; + }; + + usbhsehci: ehci@4a064c00 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x4a064c00 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 77 0x4>; + }; + }; + + omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,omap-control-usb"; + reg = <0x4a002300 0x4>, + <0x4a00233c 0x4>; + reg-names = "control_dev_conf", "otghs_control"; + ti,type = <1>; + }; + + usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = "ti,omap4-musb"; + reg = <0x4a0ab000 0x7ff>; + interrupts = <0 92 0x4>, <0 93 0x4>; + interrupt-names = "mc", "dma"; + ti,hwmods = "usb_otg_hs"; + usb-phy = <&usb2_phy>; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + ti,has-mailbox; + }; }; }; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi new file mode 100644 index 0000000..cccf39a --- /dev/null +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for OMAP443x SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap4.dtsi" + +/ { + cpus { + cpu@0 { + /* OMAP443x variants OPP50-OPPNT */ + operating-points = < + /* kHz uV */ + 300000 1025000 + 600000 1200000 + 800000 1313000 + 1008000 1375000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi new file mode 100644 index 0000000..7c2c23c --- /dev/null +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -0,0 +1,32 @@ +/* + * Device Tree Source for OMAP4460 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +/include/ "omap4.dtsi" + +/ { + cpus { + /* OMAP446x 'standard device' variants OPP50 to OPPTurbo */ + cpu@0 { + operating-points = < + /* kHz uV */ + 350000 975000 + 700000 1075000 + 920000 1200000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 54 0x4>, + <0 55 0x4>; + ti,hwmods = "debugss"; + }; +}; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 8722c15..982acd1 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -16,7 +16,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x80000000>; /* 2 GB */ + reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; vmmcsd_fixed: fixedregulator-mmcsd { @@ -80,6 +80,68 @@ 0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */ >; }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x1b2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ + 0x1b4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 0x100 /* i2c2_scl INPUTENABLE | MODE0 */ + 0x17a 0x100 /* i2c2_sda INPUTENABLE | MODE0 */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x13a 0x100 /* i2c3_scl INPUTENABLE | MODE0 */ + 0x13c 0x100 /* i2c3_sda INPUTENABLE | MODE0 */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + 0xb8 0x100 /* i2c4_scl INPUTENABLE | MODE0 */ + 0xba 0x100 /* i2c4_sda INPUTENABLE | MODE0 */ + >; + }; + + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x184 0x100 /* i2c5_scl INPUTENABLE | MODE0 */ + 0x186 0x100 /* i2c5_sda INPUTENABLE | MODE0 */ + >; + }; + + mcspi2_pins: pinmux_mcspi2_pins { + pinctrl-single,pins = < + 0xbc 0x100 /* MCSPI2_CLK INPUTENABLE | MODE0 */ + 0xbe 0x100 /* MCSPI2_SIMO INPUTENABLE | MODE0 */ + 0xc0 0x118 /* MCSPI2_SOMI PULLUP | INPUTENABLE | MODE0*/ + 0xc2 0x0 /* MCSPI2_CS MODE0*/ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + 0x78 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */ + 0x7a 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */ + 0x7c 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */ + 0x7e 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */ + >; + }; + + mcspi4_pins: pinmux_mcspi4_pins { + pinctrl-single,pins = < + 0x164 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */ + 0x168 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */ + 0x16a 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */ + 0x16c 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */ + >; + }; }; &mmc1 { @@ -106,7 +168,17 @@ status = "disabled"; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; +}; + &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; /* Pressure Sensor */ @@ -116,7 +188,17 @@ }; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; +}; + &i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; /* Temperature Sensor */ @@ -126,6 +208,13 @@ }; }; +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + + clock-frequency = <400000>; +}; + &keypad { keypad,num-rows = <8>; keypad,num-columns = <8>; @@ -151,3 +240,22 @@ cs1-used; device-handle = <&samsung_K3PE0E000B>; }; + +&mcspi1 { + +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi4_pins>; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 790bb2a..3dd7ff8 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -18,6 +18,9 @@ /include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,omap5"; interrupt-parent = <&gic>; @@ -33,24 +36,32 @@ cpus { cpu@0 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - /* 14th PPI IRQ, active low level-sensitive */ - interrupts = <1 14 0x308>; - clock-frequency = <6144000>; - }; }; cpu@1 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - /* 14th PPI IRQ, active low level-sensitive */ - interrupts = <1 14 0x308>; - clock-frequency = <6144000>; - }; }; }; + timer { + compatible = "arm,armv7-timer"; + /* PPI secure/nonsecure IRQ, active low level-sensitive */ + interrupts = <1 13 0x308>, + <1 14 0x308>, + <1 11 0x308>, + <1 10 0x308>; + clock-frequency = <6144000>; + }; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>, + <0x48214000 0x2000>, + <0x48216000 0x2000>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -76,6 +87,11 @@ #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + reg = <0x44000000 0x2000>, + <0x44800000 0x3000>, + <0x45000000 0x4000>; + interrupts = <0 9 0x4>, + <0 10 0x4>; counter32k: counter@4ae04000 { compatible = "ti,omap-counter32k"; @@ -100,12 +116,16 @@ pinctrl-single,function-mask = <0x7fff>; }; - gic: interrupt-controller@48211000 { - compatible = "arm,cortex-a15-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>; + sdma: dma-controller@4a056000 { + compatible = "ti,omap4430-sdma"; + reg = <0x4a056000 0x1000>; + interrupts = <0 12 0x4>, + <0 13 0x4>, + <0 14 0x4>, + <0 15 0x4>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -113,10 +133,11 @@ reg = <0x4ae10000 0x200>; interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; + ti,gpio-always-on; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -127,7 +148,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -138,7 +159,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -149,7 +170,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -160,7 +181,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -171,7 +192,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@48051000 { @@ -182,7 +203,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio8: gpio@48053000 { @@ -193,7 +214,18 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <0 20 0x4>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; }; i2c1: i2c@48070000 { @@ -241,6 +273,65 @@ ti,hwmods = "i2c5"; }; + mcspi1: spi@48098000 { + compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <0 65 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: spi@4809a000 { + compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <0 66 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + mcspi3: spi@480b8000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <0 91 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + }; + + mcspi4: spi@480ba000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <0 48 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + }; + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; @@ -296,6 +387,8 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; }; mmc2: mmc@480b4000 { @@ -304,6 +397,8 @@ interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; }; mmc3: mmc@480ad000 { @@ -312,6 +407,8 @@ interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; }; mmc4: mmc@480d1000 { @@ -320,6 +417,8 @@ interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; }; mmc5: mmc@480d5000 { @@ -328,10 +427,13 @@ interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; }; keypad: keypad@4ae1c000 { compatible = "ti,omap4-keypad"; + reg = <0x4ae1c000 0x400>; ti,hwmods = "kbd"; }; @@ -342,6 +444,9 @@ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; ti,hwmods = "mcpdm"; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; }; dmic: dmic@4012e000 { @@ -351,6 +456,8 @@ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; ti,hwmods = "dmic"; + dmas = <&sdma 67>; + dma-names = "up_link"; }; mcbsp1: mcbsp@40122000 { @@ -362,6 +469,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@40124000 { @@ -373,6 +483,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@40126000 { @@ -384,10 +497,13 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; timer1: timer@4ae18000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; interrupts = <0 37 0x4>; ti,hwmods = "timer1"; @@ -395,28 +511,28 @@ }; timer2: timer@48032000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; interrupts = <0 38 0x4>; ti,hwmods = "timer2"; }; timer3: timer@48034000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; interrupts = <0 39 0x4>; ti,hwmods = "timer3"; }; timer4: timer@48036000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; interrupts = <0 40 0x4>; ti,hwmods = "timer4"; }; timer5: timer@40138000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x40138000 0x80>, <0x49038000 0x80>; interrupts = <0 41 0x4>; @@ -425,7 +541,7 @@ }; timer6: timer@4013a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4013a000 0x80>, <0x4903a000 0x80>; interrupts = <0 42 0x4>; @@ -435,7 +551,7 @@ }; timer7: timer@4013c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4013c000 0x80>, <0x4903c000 0x80>; interrupts = <0 43 0x4>; @@ -444,7 +560,7 @@ }; timer8: timer@4013e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4013e000 0x80>, <0x4903e000 0x80>; interrupts = <0 44 0x4>; @@ -454,27 +570,34 @@ }; timer9: timer@4803e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; interrupts = <0 47 0x4>; ti,hwmods = "timer11"; ti,timer-pwm; }; + wdt2: wdt@4ae14000 { + compatible = "ti,omap5-wdt", "ti,omap3-wdt"; + reg = <0x4ae14000 0x80>; + interrupts = <0 80 0x4>; + ti,hwmods = "wd_timer2"; + }; + emif1: emif@0x4c000000 { compatible = "ti,emif-4d5"; ti,hwmods = "emif1"; @@ -496,5 +619,53 @@ hw-caps-ll-interface; hw-caps-temp-alert; }; + + omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,omap-control-usb"; + reg = <0x4a002300 0x4>, + <0x4a002370 0x4>; + reg-names = "control_dev_conf", "phy_power_usb"; + ti,type = <2>; + }; + + omap_dwc3@4a020000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss"; + reg = <0x4a020000 0x1000>; + interrupts = <0 93 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + dwc3@4a030000 { + compatible = "synopsys,dwc3"; + reg = <0x4a030000 0x1000>; + interrupts = <0 92 4>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + tx-fifo-resize; + }; + }; + + ocp2scp { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp1"; + usb2_phy: usb2phy@4a084000 { + compatible = "ti,omap-usb2"; + reg = <0x4a084000 0x7c>; + ctrl-module = <&omap_control_usb>; + }; + + usb3_phy: usb3phy@4a084400 { + compatible = "ti,omap-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_usb>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index ed0bc95..b3034da 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -23,6 +23,12 @@ compatible = "ti,twl4030-wdt"; }; + vcc: regulator-vdd1 { + compatible = "ti,twl4030-vdd1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1450000>; + }; + vdac: regulator-vdac { compatible = "ti,twl4030-vdac"; regulator-min-microvolt = <1800000>; @@ -67,7 +73,7 @@ #interrupt-cells = <1>; }; - twl4030-usb { + usb2_phy: twl4030-usb { compatible = "ti,twl4030-usb"; interrupts = <10>, <4>; usb1v5-supply = <&vusb1v5>; @@ -75,4 +81,14 @@ usb3v1-supply = <&vusb3v1>; usb_mode = <1>; }; + + twl_pwm: pwm { + compatible = "ti,twl4030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + compatible = "ti,twl4030-pwmled"; + #pwm-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 9996cfc..2e3bd31 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -91,4 +91,16 @@ compatible = "ti,twl6030-usb"; interrupts = <4>, <10>; }; + + twl_pwm: pwm { + /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */ + compatible = "ti,twl6030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + /* provides one PWM (id 0 for Charging indicator LED) */ + compatible = "ti,twl6030-pwmled"; + #pwm-cells = <2>; + }; }; diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index ce812de..7eb9651 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -445,16 +445,23 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 57, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 57, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -606,6 +613,8 @@ static void __init omap_3430sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); enable_board_wakeup_source(); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 67447bd..20d6d81 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -53,16 +53,23 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 126, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 126, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -199,6 +206,8 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16); enable_board_wakeup_source(); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 7d3358b..fc53911 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -47,15 +47,17 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = GPIO_USB_NRESET, + .vcc_gpio = GPIO_USB_POWER, + .vcc_polarity = 1, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = GPIO_USB_NRESET, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; static struct mtd_partition crane_nand_partitions[] = { @@ -131,13 +133,7 @@ static void __init am3517_crane_init(void) return; } - ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH, - "usb_ehci_enable"); - if (ret < 0) { - pr_err("Can not request GPIO %d\n", GPIO_USB_POWER); - return; - } - + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 9fb8590..191f976 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -274,6 +274,14 @@ static __init void am3517_evm_mcbsp1_init(void) omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 57, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ @@ -282,12 +290,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = { #else .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, #endif - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 57, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -349,7 +351,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; - static void __init am3517_evm_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -361,6 +362,8 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index af2bb21..7fda3f5 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -419,15 +419,22 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = OMAP_MAX_GPIO_LINES + 6, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = OMAP_MAX_GPIO_LINES + 7, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6, - .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7, - .reset_gpio_port[2] = -EINVAL }; static void __init cm_t35_init_usbh(void) @@ -444,6 +451,7 @@ static void __init cm_t35_init_usbh(void) msleep(1); } + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a66da80..6920f6cf 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -188,15 +188,22 @@ static inline void cm_t3517_init_rtc(void) {} #define HSUSB2_RESET_GPIO (147) #define USB_HUB_RESET_GPIO (152) +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = HSUSB1_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = HSUSB2_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = HSUSB1_RESET_GPIO, - .reset_gpio_port[1] = HSUSB2_RESET_GPIO, - .reset_gpio_port[2] = -EINVAL, }; static int __init cm_t3517_init_usbh(void) @@ -213,6 +220,7 @@ static int __init cm_t3517_init_usbh(void) msleep(1); } + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&cm_t3517_ehci_pdata); return 0; diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 53056c3..42fbf1e 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -437,15 +437,7 @@ static struct platform_device *devkit8000_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index e54a480..afa509a 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -110,6 +110,7 @@ MACHINE_END static const char *omap3_gp_boards_compat[] __initdata = { "ti,omap3-beagle", + "timll,omap3-devkit8000", NULL, }; diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index bf92678..95ccec0 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -527,26 +527,28 @@ static void __init igep_i2c_init(void) omap3_pmic_init("twl4030", &igep_twldata); } +static struct usbhs_phy_data igep2_phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = IGEP2_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + +static struct usbhs_phy_data igep3_phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = IGEP3_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL, }; static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -642,8 +644,10 @@ static void __init igep_init(void) if (machine_is_igep0020()) { omap_display_init(&igep2_dss_data); igep2_init_smsc911x(); + usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data)); usbhs_init(&igep2_usbhs_bdata); } else { + usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data)); usbhs_init(&igep3_usbhs_bdata); } } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index c3558f9..5382215 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,6 +33,7 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -277,6 +278,21 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; +/* PHY's VCC regulator might be added later, so flag that we need it */ +static struct nop_usb_xceiv_platform_data hsusb2_phy_data = { + .needs_vcc = true, +}; + +static struct usbhs_phy_data phy_data[] = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */ + .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */ + .platform_data = &hsusb2_phy_data, + }, +}; + static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -318,9 +334,11 @@ static int beagle_twl_gpio_setup(struct device *dev, } dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; - gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, - "nEN_USB_PWR"); + /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ + phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; + phy_data[0].vcc_polarity = beagle_config.usb_pwr_level; + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); return 0; } @@ -453,15 +471,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -543,7 +553,9 @@ static void __init omap3_beagle_init(void) usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + usbhs_init(&usbhs_bdata); + board_nand_init(omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 48789e0..2de92fa 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -496,7 +496,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ REGULATOR_SUPPLY("vaux2", NULL), }; @@ -539,17 +539,16 @@ static int __init omap3_evm_i2c_init(void) return 0; } -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = -1, /* set at runtime */ + .vcc_gpio = -EINVAL, + }, +}; - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - /* PHY reset GPIO will be runtime programmed based on EVM version */ - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -725,7 +724,7 @@ static void __init omap3_evm_init(void) /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); - usbhs_bdata.reset_gpio_port[1] = 21; + phy_data[0].reset_gpio = 21; /* EVM REV >= E can supply 500mA with EXTVBUS programming */ musb_board_data.power = 500; @@ -733,10 +732,12 @@ static void __init omap3_evm_init(void) } else { /* setup EHCI phy reset on MDC */ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); - usbhs_bdata.reset_gpio_port[1] = 135; + phy_data[0].reset_gpio = 135; } usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); board_nand_init(omap3evm_nand_partitions, ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2bba362..1004d2a 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -346,7 +346,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ }; /* ads7846 on SPI and 2 nub controllers on I2C */ @@ -561,6 +561,14 @@ fail: printk(KERN_ERR "wl1251 board initialisation failed\n"); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 16, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, @@ -569,15 +577,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 16, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -601,7 +601,10 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data, NULL); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 95c10b3..bf09564 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -358,19 +358,20 @@ static int __init omap3_stalker_i2c_init(void) #define OMAP3_STALKER_TS_GPIO 175 +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 21, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 21, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -407,6 +408,8 @@ static void __init omap3_stalker_init(void) omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index bcd44fb..7da48bc 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -305,21 +305,22 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3_touchbook_devices[] __initdata = { &leds_gpio, &keys_gpio, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, - .reset_gpio_port[2] = -EINVAL }; static void omap3_touchbook_poweroff(void) @@ -368,6 +369,8 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); board_nand_init(omap3touchbook_nand_partitions, ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index b02c2f0..a71ad34 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -31,6 +31,7 @@ #include <linux/ti_wilink_st.h> #include <linux/usb/musb.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/wl12xx.h> #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -132,6 +133,22 @@ static struct platform_device btwilink_device = { .id = -1, }; +/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */ +static struct nop_usb_xceiv_platform_data hsusb1_phy_data = { + /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ + .clk_rate = 19200000, +}; + +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = GPIO_HUB_NRESET, + .vcc_gpio = GPIO_HUB_POWER, + .vcc_polarity = 1, + .platform_data = &hsusb1_phy_data, + }, +}; + static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, @@ -142,49 +159,19 @@ static struct platform_device *panda_devices[] __initdata = { static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = false, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL -}; - -static struct gpio panda_ehci_gpios[] __initdata = { - { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" }, - { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" }, }; static void __init omap4_ehci_init(void) { int ret; - struct clk *phy_ref_clk; /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ - phy_ref_clk = clk_get(NULL, "auxclk3_ck"); - if (IS_ERR(phy_ref_clk)) { - pr_err("Cannot request auxclk3\n"); - return; - } - clk_set_rate(phy_ref_clk, 19200000); - clk_prepare_enable(phy_ref_clk); - - /* disable the power to the usb hub prior to init and reset phy+hub */ - ret = gpio_request_array(panda_ehci_gpios, - ARRAY_SIZE(panda_ehci_gpios)); - if (ret) { - pr_err("Unable to initialize EHCI power/reset\n"); - return; - } - - gpio_export(GPIO_HUB_POWER, 0); - gpio_export(GPIO_HUB_NRESET, 0); - gpio_set_value(GPIO_HUB_NRESET, 1); + ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL); + if (ret) + pr_err("Failed to add main_clk alias to auxclk3_ck\n"); + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); - - /* enable power to hub */ - gpio_set_value(GPIO_HUB_POWER, 1); } static struct omap_musb_board_data musb_board_data = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 86bab51..ab79a44 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -458,14 +458,16 @@ static int __init overo_spi_init(void) return 0; } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = OVERO_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -502,6 +504,8 @@ static void __init overo_init(void) ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); overo_spi_init(); overo_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 5e4d4c9..1a3dd86 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -92,14 +92,16 @@ static struct mtd_partition zoom_nand_partitions[] = { }, }; +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = ZOOM3_EHCI_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO, - .reset_gpio_port[2] = -EINVAL, }; static void __init omap_zoom_init(void) @@ -109,6 +111,8 @@ static void __init omap_zoom_init(void) } else if (machine_is_omap_zoom3()) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 476b820..7f091c8 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -958,6 +958,14 @@ int __init am33xx_clk_init(void) clk_set_parent(&timer3_fck, &sys_clkin_ck); clk_set_parent(&timer6_fck, &sys_clkin_ck); + /* + * The On-Chip 32K RC Osc clock is not an accurate clock-source as per + * the design/spec, so as a result, for example, timer which supposed + * to get expired @60Sec, but will expire somewhere ~@40Sec, which is + * not expected by any use-case, so change WDT1 clock source to PRCM + * 32KHz clock. + */ + clk_set_parent(&wdt1_fck, &clkdiv32k_ick); return 0; } diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 3aed4b0..6e9873f 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -480,20 +480,22 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!dd) return -EINVAL; - __clk_prepare(dd->clk_bypass); - clk_enable(dd->clk_bypass); - __clk_prepare(dd->clk_ref); - clk_enable(dd->clk_ref); - if (__clk_get_rate(dd->clk_bypass) == rate && (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { pr_debug("%s: %s: set rate: entering bypass.\n", __func__, __clk_get_name(hw->clk)); + __clk_prepare(dd->clk_bypass); + clk_enable(dd->clk_bypass); ret = _omap3_noncore_dpll_bypass(clk); if (!ret) new_parent = dd->clk_bypass; + clk_disable(dd->clk_bypass); + __clk_unprepare(dd->clk_bypass); } else { + __clk_prepare(dd->clk_ref); + clk_enable(dd->clk_ref); + if (dd->last_rounded_rate != rate) rate = __clk_round_rate(hw->clk, rate); @@ -514,6 +516,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, ret = omap3_noncore_dpll_program(clk, freqsel); if (!ret) new_parent = dd->clk_ref; + clk_disable(dd->clk_ref); + __clk_unprepare(dd->clk_ref); } /* * FIXME - this is all wrong. common code handles reparenting and @@ -525,11 +529,6 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (!ret) __clk_reparent(hw->clk, new_parent); - clk_disable(dd->clk_ref); - __clk_unprepare(dd->clk_ref); - clk_disable(dd->clk_bypass); - __clk_unprepare(dd->clk_bypass); - return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c2c798c..63b774f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -138,6 +138,8 @@ #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/bootmem.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/system_misc.h> @@ -610,8 +612,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags |= _HWMOD_WAKEUP_ENABLED; - return 0; } @@ -645,8 +645,6 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) /* XXX test pwrdm_get_wken for this hwmod's subsystem */ - oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED; - return 0; } @@ -2350,6 +2348,34 @@ static int _shutdown(struct omap_hwmod *oh) } /** + * of_dev_hwmod_lookup - look up needed hwmod from dt blob + * @np: struct device_node * + * @oh: struct omap_hwmod * + * + * Parse the dt blob and find out needed hwmod. Recursive function is + * implemented to take care hierarchical dt blob parsing. + * Return: The device node on success or NULL on failure. + */ +static struct device_node *of_dev_hwmod_lookup(struct device_node *np, + struct omap_hwmod *oh) +{ + struct device_node *np0 = NULL, *np1 = NULL; + const char *p; + + for_each_child_of_node(np, np0) { + if (of_find_property(np0, "ti,hwmods", NULL)) { + p = of_get_property(np0, "ti,hwmods", NULL); + if (!strcmp(p, oh->name)) + return np0; + np1 = of_dev_hwmod_lookup(np0, oh); + if (np1) + return np1; + } + } + return NULL; +} + +/** * _init_mpu_rt_base - populate the virtual address for a hwmod * @oh: struct omap_hwmod * to locate the virtual address * @@ -2361,7 +2387,8 @@ static int _shutdown(struct omap_hwmod *oh) static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) { struct omap_hwmod_addr_space *mem; - void __iomem *va_start; + void __iomem *va_start = NULL; + struct device_node *np; if (!oh) return; @@ -2375,10 +2402,18 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) if (!mem) { pr_debug("omap_hwmod: %s: no MPU register target found\n", oh->name); - return; + + /* Extract the IO space from device tree blob */ + if (!of_have_populated_dt()) + return; + + np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); + if (np) + va_start = of_iomap(np, 0); + } else { + va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } - va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); if (!va_start) { pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); return; @@ -2410,7 +2445,8 @@ static int __init _init(struct omap_hwmod *oh, void *data) if (oh->_state != _HWMOD_STATE_REGISTERED) return 0; - _init_mpu_rt_base(oh, NULL); + if (oh->class->sysc) + _init_mpu_rt_base(oh, NULL); r = _init_clocks(oh, NULL); if (IS_ERR_VALUE(r)) { diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index d43d9b6..28f4dea 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -477,15 +477,13 @@ struct omap_hwmod_omap4_prcm { * These are for internal use only and are managed by the omap_hwmod code. * * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module - * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - * causes the first call to _enable() to only update the pinmux */ #define _HWMOD_NO_MPU_PORT (1 << 0) -#define _HWMOD_WAKEUP_ENABLED (1 << 1) -#define _HWMOD_SYSCONFIG_LOADED (1 << 2) -#define _HWMOD_SKIP_ENABLE (1 << 3) +#define _HWMOD_SYSCONFIG_LOADED (1 << 1) +#define _HWMOD_SKIP_ENABLE (1 << 2) /* * omap_hwmod._state definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 26eee4a..31bea1c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -28,6 +28,7 @@ #include "prm-regbits-33xx.h" #include "i2c.h" #include "mmc.h" +#include "wd_timer.h" /* * IP blocks @@ -2087,8 +2088,21 @@ static struct omap_hwmod am33xx_uart6_hwmod = { }; /* 'wd_timer' class */ +static struct omap_hwmod_class_sysconfig wdt_sysc = { + .rev_offs = 0x0, + .sysc_offs = 0x10, + .syss_offs = 0x14, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = { .name = "wd_timer", + .sysc = &wdt_sysc, + .pre_shutdown = &omap2_wd_timer_disable, }; /* @@ -2099,6 +2113,7 @@ static struct omap_hwmod am33xx_wd_timer1_hwmod = { .name = "wd_timer2", .class = &am33xx_wd_timer_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE, .main_clk = "wdt1_fck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index 9debf82..9ace8ea 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -11,6 +11,8 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ +#include <linux/of.h> + #include <asm/pmu.h> #include "soc.h" @@ -63,6 +65,15 @@ static int __init omap_init_pmu(void) unsigned oh_num; char **oh_names; + /* XXX Remove this check when the CTI driver is available */ + if (cpu_is_omap443x()) { + pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n"); + return 0; + } + + if (of_have_populated_dt()) + return 0; + /* * To create an ARM-PMU device the following HWMODs * are required for the various OMAP2+ devices. @@ -75,9 +86,6 @@ static int __init omap_init_pmu(void) if (cpu_is_omap443x()) { oh_num = ARRAY_SIZE(omap4430_pmu_oh_names); oh_names = omap4430_pmu_oh_names; - /* XXX Remove the next two lines when CTI driver available */ - pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n"); - return 0; } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) { oh_num = ARRAY_SIZE(omap3_pmu_oh_names); oh_names = omap3_pmu_oh_names; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 8e61d80..89cad4a 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -52,7 +52,6 @@ enum { #define ALREADYACTIVE_SWITCH 0 #define FORCEWAKEUP_SWITCH 1 #define LOWPOWERSTATE_SWITCH 2 -#define ERROR_SWITCH 3 /* pwrdm_list contains all registered struct powerdomains */ static LIST_HEAD(pwrdm_list); @@ -233,10 +232,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, { u8 sleep_switch; - if (curr_pwrst < 0) { - WARN_ON(1); - sleep_switch = ERROR_SWITCH; - } else if (curr_pwrst < PWRDM_POWER_ON) { + if (curr_pwrst < PWRDM_POWER_ON) { if (curr_pwrst > pwrst && pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && arch_pwrdm->pwrdm_set_lowpwrstchange) { @@ -1091,7 +1087,8 @@ int pwrdm_post_transition(struct powerdomain *pwrdm) */ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) { - u8 curr_pwrst, next_pwrst, sleep_switch; + u8 next_pwrst, sleep_switch; + int curr_pwrst; int ret = 0; bool hwsup = false; @@ -1107,16 +1104,17 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) pwrdm_lock(pwrdm); curr_pwrst = pwrdm_read_pwrst(pwrdm); + if (curr_pwrst < 0) { + ret = -EINVAL; + goto osps_out; + } + next_pwrst = pwrdm_read_next_pwrst(pwrdm); if (curr_pwrst == pwrst && next_pwrst == pwrst) goto osps_out; sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst, pwrst, &hwsup); - if (sleep_switch == ERROR_SWITCH) { - ret = -EINVAL; - goto osps_out; - } ret = pwrdm_set_next_pwrst(pwrdm, pwrst); if (ret) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2bdd4cf..14b89af 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -143,7 +143,12 @@ static struct property device_disabled = { }; static struct of_device_id omap_timer_match[] __initdata = { - { .compatible = "ti,omap2-timer", }, + { .compatible = "ti,omap2420-timer", }, + { .compatible = "ti,omap3430-timer", }, + { .compatible = "ti,omap4430-timer", }, + { .compatible = "ti,omap5430-timer", }, + { .compatible = "ti,am335x-timer", }, + { .compatible = "ti,am335x-timer-1ms", }, { } }; diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 5706bdc..aa27d7f 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -22,8 +22,12 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/dma-mapping.h> - -#include <asm/io.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/string.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/usb/phy.h> #include "soc.h" #include "omap_device.h" @@ -526,3 +530,155 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata) } #endif + +/* Template for PHY regulators */ +static struct fixed_voltage_config hsusb_reg_config = { + /* .supply_name filled later */ + .microvolts = 3300000, + .gpio = -1, /* updated later */ + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, /* updated later */ + .enabled_at_boot = 0, /* keep in RESET */ + /* .init_data filled later */ +}; + +static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */ +static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ + +/** + * usbhs_add_regulator - Add a gpio based fixed voltage regulator device + * @name: name for the regulator + * @dev_id: device id of the device this regulator supplies power to + * @dev_supply: supply name that the device expects + * @gpio: GPIO number + * @polarity: 1 - Active high, 0 - Active low + */ +static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply, + int gpio, int polarity) +{ + struct regulator_consumer_supply *supplies; + struct regulator_init_data *reg_data; + struct fixed_voltage_config *config; + struct platform_device *pdev; + int ret; + + supplies = kzalloc(sizeof(*supplies), GFP_KERNEL); + if (!supplies) + return -ENOMEM; + + supplies->supply = dev_supply; + supplies->dev_name = dev_id; + + reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL); + if (!reg_data) + return -ENOMEM; + + reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; + reg_data->consumer_supplies = supplies; + reg_data->num_consumer_supplies = 1; + + config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config), + GFP_KERNEL); + if (!config) + return -ENOMEM; + + config->supply_name = name; + config->gpio = gpio; + config->enable_high = polarity; + config->init_data = reg_data; + + /* create a regulator device */ + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->id = PLATFORM_DEVID_AUTO; + pdev->name = reg_name; + pdev->dev.platform_data = config; + + ret = platform_device_register(pdev); + if (ret) + pr_err("%s: Failed registering regulator %s for %s\n", + __func__, name, dev_id); + + return ret; +} + +int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) +{ + char *rail_name; + int i, len; + struct platform_device *pdev; + char *phy_id; + + /* the phy_id will be something like "nop_usb_xceiv.1" */ + len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */ + + for (i = 0; i < num_phys; i++) { + + if (!phy->port) { + pr_err("%s: Invalid port 0. Must start from 1\n", + __func__); + continue; + } + + /* do we need a NOP PHY device ? */ + if (!gpio_is_valid(phy->reset_gpio) && + !gpio_is_valid(phy->vcc_gpio)) + continue; + + /* create a NOP PHY device */ + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->id = phy->port; + pdev->name = nop_name; + pdev->dev.platform_data = phy->platform_data; + + phy_id = kmalloc(len, GFP_KERNEL); + if (!phy_id) + return -ENOMEM; + + scnprintf(phy_id, len, "nop_usb_xceiv.%d\n", + pdev->id); + + if (platform_device_register(pdev)) { + pr_err("%s: Failed to register device %s\n", + __func__, phy_id); + continue; + } + + usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id); + + /* Do we need RESET regulator ? */ + if (gpio_is_valid(phy->reset_gpio)) { + + rail_name = kmalloc(13, GFP_KERNEL); + if (!rail_name) + return -ENOMEM; + + scnprintf(rail_name, 13, "hsusb%d_reset", phy->port); + + usbhs_add_regulator(rail_name, phy_id, "reset", + phy->reset_gpio, 1); + } + + /* Do we need VCC regulator ? */ + if (gpio_is_valid(phy->vcc_gpio)) { + + rail_name = kmalloc(13, GFP_KERNEL); + if (!rail_name) + return -ENOMEM; + + scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port); + + usbhs_add_regulator(rail_name, phy_id, "vcc", + phy->vcc_gpio, phy->vcc_polarity); + } + + phy++; + } + + return 0; +} diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index 3319f5c..e7261eb 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -53,8 +53,17 @@ #define USBPHY_OTGSESSEND_EN (1 << 20) #define USBPHY_DATA_POLARITY (1 << 23) +struct usbhs_phy_data { + int port; /* 1 indexed port number */ + int reset_gpio; + int vcc_gpio; + bool vcc_polarity; /* 1 active high, 0 active low */ + void *platform_data; +}; + extern void usb_musb_init(struct omap_musb_board_data *board_data); extern void usbhs_init(struct usbhs_omap_platform_data *pdata); +extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys); extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index a0daa2f..5d0af13 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -52,6 +52,13 @@ static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); +enum { + REQUEST_ANY = 0, + REQUEST_BY_ID, + REQUEST_BY_CAP, + REQUEST_BY_NODE, +}; + /** * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode * @timer: timer pointer over which read operation to perform @@ -178,29 +185,82 @@ int omap_dm_timer_reserve_systimer(int id) return 0; } -struct omap_dm_timer *omap_dm_timer_request(void) +static struct omap_dm_timer *_omap_dm_timer_request(int req_type, void *data) { struct omap_dm_timer *timer = NULL, *t; + struct device_node *np = NULL; unsigned long flags; - int ret = 0; + u32 cap = 0; + int id = 0; + + switch (req_type) { + case REQUEST_BY_ID: + id = *(int *)data; + break; + case REQUEST_BY_CAP: + cap = *(u32 *)data; + break; + case REQUEST_BY_NODE: + np = (struct device_node *)data; + break; + default: + /* REQUEST_ANY */ + break; + } spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(t, &omap_timer_list, node) { if (t->reserved) continue; - timer = t; - timer->reserved = 1; - break; + switch (req_type) { + case REQUEST_BY_ID: + if (id == t->pdev->id) { + timer = t; + timer->reserved = 1; + goto found; + } + break; + case REQUEST_BY_CAP: + if (cap == (t->capability & cap)) { + /* + * If timer is not NULL, we have already found + * one timer but it was not an exact match + * because it had more capabilites that what + * was required. Therefore, unreserve the last + * timer found and see if this one is a better + * match. + */ + if (timer) + timer->reserved = 0; + timer = t; + timer->reserved = 1; + + /* Exit loop early if we find an exact match */ + if (t->capability == cap) + goto found; + } + break; + case REQUEST_BY_NODE: + if (np == t->pdev->dev.of_node) { + timer = t; + timer->reserved = 1; + goto found; + } + break; + default: + /* REQUEST_ANY */ + timer = t; + timer->reserved = 1; + goto found; + } } +found: spin_unlock_irqrestore(&dm_timer_lock, flags); - if (timer) { - ret = omap_dm_timer_prepare(timer); - if (ret) { - timer->reserved = 0; - timer = NULL; - } + if (timer && omap_dm_timer_prepare(timer)) { + timer->reserved = 0; + timer = NULL; } if (!timer) @@ -208,43 +268,23 @@ struct omap_dm_timer *omap_dm_timer_request(void) return timer; } + +struct omap_dm_timer *omap_dm_timer_request(void) +{ + return _omap_dm_timer_request(REQUEST_ANY, NULL); +} EXPORT_SYMBOL_GPL(omap_dm_timer_request); struct omap_dm_timer *omap_dm_timer_request_specific(int id) { - struct omap_dm_timer *timer = NULL, *t; - unsigned long flags; - int ret = 0; - /* Requesting timer by ID is not supported when device tree is used */ if (of_have_populated_dt()) { - pr_warn("%s: Please use omap_dm_timer_request_by_cap()\n", + pr_warn("%s: Please use omap_dm_timer_request_by_cap/node()\n", __func__); return NULL; } - spin_lock_irqsave(&dm_timer_lock, flags); - list_for_each_entry(t, &omap_timer_list, node) { - if (t->pdev->id == id && !t->reserved) { - timer = t; - timer->reserved = 1; - break; - } - } - spin_unlock_irqrestore(&dm_timer_lock, flags); - - if (timer) { - ret = omap_dm_timer_prepare(timer); - if (ret) { - timer->reserved = 0; - timer = NULL; - } - } - - if (!timer) - pr_debug("%s: timer%d request failed!\n", __func__, id); - - return timer; + return _omap_dm_timer_request(REQUEST_BY_ID, &id); } EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); @@ -259,46 +299,25 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); */ struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap) { - struct omap_dm_timer *timer = NULL, *t; - unsigned long flags; + return _omap_dm_timer_request(REQUEST_BY_CAP, &cap); +} +EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap); - if (!cap) +/** + * omap_dm_timer_request_by_node - Request a timer by device-tree node + * @np: Pointer to device-tree timer node + * + * Request a timer based upon a device node pointer. Returns pointer to + * timer handle on success and a NULL pointer on failure. + */ +struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np) +{ + if (!np) return NULL; - spin_lock_irqsave(&dm_timer_lock, flags); - list_for_each_entry(t, &omap_timer_list, node) { - if ((!t->reserved) && ((t->capability & cap) == cap)) { - /* - * If timer is not NULL, we have already found one timer - * but it was not an exact match because it had more - * capabilites that what was required. Therefore, - * unreserve the last timer found and see if this one - * is a better match. - */ - if (timer) - timer->reserved = 0; - - timer = t; - timer->reserved = 1; - - /* Exit loop early if we find an exact match */ - if (t->capability == cap) - break; - } - } - spin_unlock_irqrestore(&dm_timer_lock, flags); - - if (timer && omap_dm_timer_prepare(timer)) { - timer->reserved = 0; - timer = NULL; - } - - if (!timer) - pr_debug("%s: timer request failed!\n", __func__); - - return timer; + return _omap_dm_timer_request(REQUEST_BY_NODE, np); } -EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap); +EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_node); int omap_dm_timer_free(struct omap_dm_timer *timer) { @@ -315,7 +334,21 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_free); void omap_dm_timer_enable(struct omap_dm_timer *timer) { + int c; + pm_runtime_get_sync(&timer->pdev->dev); + + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (timer->get_context_loss_count) { + c = timer->get_context_loss_count(&timer->pdev->dev); + if (c != timer->ctx_loss_count) { + omap_timer_restore_context(timer); + timer->ctx_loss_count = c; + } + } else { + omap_timer_restore_context(timer); + } + } } EXPORT_SYMBOL_GPL(omap_dm_timer_enable); @@ -410,13 +443,6 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); - if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (timer->get_context_loss_count && - timer->get_context_loss_count(&timer->pdev->dev) != - timer->ctx_loss_count) - omap_timer_restore_context(timer); - } - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); if (!(l & OMAP_TIMER_CTRL_ST)) { l |= OMAP_TIMER_CTRL_ST; @@ -441,12 +467,6 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); - if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (timer->get_context_loss_count) - timer->ctx_loss_count = - timer->get_context_loss_count(&timer->pdev->dev); - } - /* * Since the register values are computed and written within * __omap_dm_timer_stop, we need to use read to retrieve the @@ -553,13 +573,6 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); - if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (timer->get_context_loss_count && - timer->get_context_loss_count(&timer->pdev->dev) != - timer->ctx_loss_count) - omap_timer_restore_context(timer); - } - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); if (autoreload) { l |= OMAP_TIMER_CTRL_AR; @@ -770,6 +783,8 @@ int omap_dm_timers_active(void) } EXPORT_SYMBOL_GPL(omap_dm_timers_active); +static const struct of_device_id omap_timer_match[]; + /** * omap_dm_timer_probe - probe function called for every registered device * @pdev: pointer to current timer platform device @@ -783,7 +798,11 @@ static int omap_dm_timer_probe(struct platform_device *pdev) struct omap_dm_timer *timer; struct resource *mem, *irq; struct device *dev = &pdev->dev; - struct dmtimer_platform_data *pdata = pdev->dev.platform_data; + const struct of_device_id *match; + const struct dmtimer_platform_data *pdata; + + match = of_match_device(of_match_ptr(omap_timer_match), dev); + pdata = match ? match->data : dev->platform_data; if (!pdata && !dev->of_node) { dev_err(dev, "%s: no platform data.\n", __func__); @@ -823,12 +842,14 @@ static int omap_dm_timer_probe(struct platform_device *pdev) timer->capability |= OMAP_TIMER_SECURE; } else { timer->id = pdev->id; - timer->errata = pdata->timer_errata; timer->capability = pdata->timer_capability; timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->get_context_loss_count = pdata->get_context_loss_count; } + if (pdata) + timer->errata = pdata->timer_errata; + timer->irq = irq->start; timer->pdev = pdev; @@ -881,8 +902,34 @@ static int omap_dm_timer_remove(struct platform_device *pdev) return ret; } +static const struct dmtimer_platform_data omap3plus_pdata = { + .timer_errata = OMAP_TIMER_ERRATA_I103_I767, +}; + static const struct of_device_id omap_timer_match[] = { - { .compatible = "ti,omap2-timer", }, + { + .compatible = "ti,omap2420-timer", + }, + { + .compatible = "ti,omap3430-timer", + .data = &omap3plus_pdata, + }, + { + .compatible = "ti,omap4430-timer", + .data = &omap3plus_pdata, + }, + { + .compatible = "ti,omap5430-timer", + .data = &omap3plus_pdata, + }, + { + .compatible = "ti,am335x-timer", + .data = &omap3plus_pdata, + }, + { + .compatible = "ti,am335x-timer-1ms", + .data = &omap3plus_pdata, + }, {}, }; MODULE_DEVICE_TABLE(of, omap_timer_match); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index a3fbc48..fb92abb 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -128,6 +128,7 @@ int omap_dm_timer_reserve_systimer(int id); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap); +struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np); int omap_dm_timer_free(struct omap_dm_timer *timer); void omap_dm_timer_enable(struct omap_dm_timer *timer); void omap_dm_timer_disable(struct omap_dm_timer *timer); |