diff options
Diffstat (limited to 'arch/arm')
24 files changed, 194 insertions, 153 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a192a5c..2e56e73 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -36,7 +36,6 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_IDE if PCI || ISA || PCMCIA - select HAVE_IRQ_WORK select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO @@ -1637,7 +1636,7 @@ config ARCH_NR_GPIO default 355 if ARCH_U8500 default 264 if MACH_H4700 default 512 if SOC_OMAP5 - default 288 if ARCH_VT8500 + default 288 if ARCH_VT8500 || ARCH_SUNXI default 0 help Maximum number of GPIOs in the system. diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 63f2fbc..69140ba 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -170,10 +170,9 @@ gpio-bank = <8>; }; - pinctrl@80157000 { - // This is actually the PRCMU base address - reg = <0x80157000 0x2000>; - compatible = "stericsson,nmk_pinctrl"; + pinctrl { + compatible = "stericsson,nmk-pinctrl"; + prcm = <&prcmu>; }; usb@a03e0000 { @@ -190,9 +189,10 @@ interrupts = <0 25 0x4>; }; - prcmu@80157000 { + prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; reg = <0x80157000 0x1000>; + reg-names = "prcmu"; interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 5927a8d..6aad34a 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -37,6 +37,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; cpu@901 { diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 055fca5..3329719 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -58,10 +58,11 @@ #size-cells = <1>; ranges = <0x88000000 0x88000000 0x40000>; - clock-controller@88000000 { + clks: clock-controller@88000000 { compatible = "sirf,prima2-clkc"; reg = <0x88000000 0x1000>; interrupts = <3>; + #clock-cells = <1>; }; reset-controller@88010000 { @@ -85,6 +86,7 @@ compatible = "sirf,prima2-memc"; reg = <0x90000000 0x10000>; interrupts = <27>; + clocks = <&clks 5>; }; }; @@ -104,6 +106,7 @@ compatible = "sirf,prima2-vpp"; reg = <0x90020000 0x10000>; interrupts = <31>; + clocks = <&clks 35>; }; }; @@ -117,6 +120,7 @@ compatible = "powervr,sgx531"; reg = <0x98000000 0x8000000>; interrupts = <6>; + clocks = <&clks 32>; }; }; @@ -130,6 +134,7 @@ compatible = "sirf,prima2-video-codec"; reg = <0xa0000000 0x8000000>; interrupts = <5>; + clocks = <&clks 33>; }; }; @@ -149,12 +154,14 @@ compatible = "sirf,prima2-gps"; reg = <0xa8010000 0x10000>; interrupts = <7>; + clocks = <&clks 9>; }; dsp@a9000000 { compatible = "sirf,prima2-dsp"; reg = <0xa9000000 0x1000000>; interrupts = <8>; + clocks = <&clks 8>; }; }; @@ -174,12 +181,14 @@ compatible = "sirf,prima2-nand"; reg = <0xb0030000 0x10000>; interrupts = <41>; + clocks = <&clks 26>; }; audio@b0040000 { compatible = "sirf,prima2-audio"; reg = <0xb0040000 0x10000>; interrupts = <35>; + clocks = <&clks 27>; }; uart0: uart@b0050000 { @@ -187,6 +196,7 @@ compatible = "sirf,prima2-uart"; reg = <0xb0050000 0x10000>; interrupts = <17>; + clocks = <&clks 13>; }; uart1: uart@b0060000 { @@ -194,6 +204,7 @@ compatible = "sirf,prima2-uart"; reg = <0xb0060000 0x10000>; interrupts = <18>; + clocks = <&clks 14>; }; uart2: uart@b0070000 { @@ -201,6 +212,7 @@ compatible = "sirf,prima2-uart"; reg = <0xb0070000 0x10000>; interrupts = <19>; + clocks = <&clks 15>; }; usp0: usp@b0080000 { @@ -208,6 +220,7 @@ compatible = "sirf,prima2-usp"; reg = <0xb0080000 0x10000>; interrupts = <20>; + clocks = <&clks 28>; }; usp1: usp@b0090000 { @@ -215,6 +228,7 @@ compatible = "sirf,prima2-usp"; reg = <0xb0090000 0x10000>; interrupts = <21>; + clocks = <&clks 29>; }; usp2: usp@b00a0000 { @@ -222,6 +236,7 @@ compatible = "sirf,prima2-usp"; reg = <0xb00a0000 0x10000>; interrupts = <22>; + clocks = <&clks 30>; }; dmac0: dma-controller@b00b0000 { @@ -229,6 +244,7 @@ compatible = "sirf,prima2-dmac"; reg = <0xb00b0000 0x10000>; interrupts = <12>; + clocks = <&clks 24>; }; dmac1: dma-controller@b0160000 { @@ -236,11 +252,13 @@ compatible = "sirf,prima2-dmac"; reg = <0xb0160000 0x10000>; interrupts = <13>; + clocks = <&clks 25>; }; vip@b00C0000 { compatible = "sirf,prima2-vip"; reg = <0xb00C0000 0x10000>; + clocks = <&clks 31>; }; spi0: spi@b00d0000 { @@ -248,6 +266,7 @@ compatible = "sirf,prima2-spi"; reg = <0xb00d0000 0x10000>; interrupts = <15>; + clocks = <&clks 19>; }; spi1: spi@b0170000 { @@ -255,6 +274,7 @@ compatible = "sirf,prima2-spi"; reg = <0xb0170000 0x10000>; interrupts = <16>; + clocks = <&clks 20>; }; i2c0: i2c@b00e0000 { @@ -262,6 +282,7 @@ compatible = "sirf,prima2-i2c"; reg = <0xb00e0000 0x10000>; interrupts = <24>; + clocks = <&clks 17>; }; i2c1: i2c@b00f0000 { @@ -269,12 +290,14 @@ compatible = "sirf,prima2-i2c"; reg = <0xb00f0000 0x10000>; interrupts = <25>; + clocks = <&clks 18>; }; tsc@b0110000 { compatible = "sirf,prima2-tsc"; reg = <0xb0110000 0x10000>; interrupts = <33>; + clocks = <&clks 16>; }; gpio: pinctrl@b0120000 { @@ -507,17 +530,20 @@ pwm@b0130000 { compatible = "sirf,prima2-pwm"; reg = <0xb0130000 0x10000>; + clocks = <&clks 21>; }; efusesys@b0140000 { compatible = "sirf,prima2-efuse"; reg = <0xb0140000 0x10000>; + clocks = <&clks 22>; }; pulsec@b0150000 { compatible = "sirf,prima2-pulsec"; reg = <0xb0150000 0x10000>; interrupts = <48>; + clocks = <&clks 23>; }; pci-iobg { @@ -616,12 +642,14 @@ compatible = "chipidea,ci13611a-prima2"; reg = <0xb8000000 0x10000>; interrupts = <10>; + clocks = <&clks 40>; }; usb1: usb@b00f0000 { compatible = "chipidea,ci13611a-prima2"; reg = <0xb8010000 0x10000>; interrupts = <11>; + clocks = <&clks 41>; }; sata@b00f0000 { @@ -634,6 +662,7 @@ compatible = "sirf,prima2-security"; reg = <0xb8030000 0x10000>; interrupts = <42>; + clocks = <&clks 7>; }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index e61fdd4..f99f60d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -16,4 +16,34 @@ memory { reg = <0x40000000 0x80000000>; }; + + soc { + pinctrl@01c20800 { + compatible = "allwinner,sun4i-a10-pinctrl"; + reg = <0x01c20800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart1_pins_a: uart1@0 { + allwinner,pins = "PA10", "PA11"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 498a091..4a1e45d 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -24,6 +24,8 @@ soc { uart1: uart@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 59a2d26..e112189 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -17,4 +17,27 @@ memory { reg = <0x40000000 0x20000000>; }; + + soc { + pinctrl@01c20800 { + compatible = "allwinner,sun5i-a13-pinctrl"; + reg = <0x01c20800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + uart1_pins_a: uart1@0 { + allwinner,pins = "PE10", "PE11"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart1_pins_b: uart1@1 { + allwinner,pins = "PG3", "PG4"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + }; }; diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h index 4eb6d00..86dff32 100644 --- a/arch/arm/include/asm/smp_scu.h +++ b/arch/arm/include/asm/smp_scu.h @@ -7,8 +7,14 @@ #ifndef __ASSEMBLER__ unsigned int scu_get_core_count(void __iomem *); -void scu_enable(void __iomem *); int scu_power_mode(void __iomem *, unsigned int); + +#ifdef CONFIG_SMP +void scu_enable(void __iomem *scu_base); +#else +static inline void scu_enable(void __iomem *scu_base) {} +#endif + #endif #endif diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index c6dec5f..047d3e4 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -172,14 +172,9 @@ static void default_idle(void) local_irq_enable(); } -void (*pm_idle)(void) = default_idle; -EXPORT_SYMBOL(pm_idle); - /* - * The idle thread, has rather strange semantics for calling pm_idle, - * but this is what x86 does and we need to do the same, so that - * things like cpuidle get called in the same way. The only difference - * is that we always respect 'hlt_counter' to prevent low power idle. + * The idle thread. + * We always respect 'hlt_counter' to prevent low power idle. */ void cpu_idle(void) { @@ -210,10 +205,10 @@ void cpu_idle(void) } else if (!need_resched()) { stop_critical_timings(); if (cpuidle_idle_call()) - pm_idle(); + default_idle(); start_critical_timings(); /* - * pm_idle functions must always + * default_idle functions must always * return with IRQs enabled. */ WARN_ON(irqs_disabled()); diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index b9f015e..45eac87 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -75,7 +75,7 @@ void scu_enable(void __iomem *scu_base) int scu_power_mode(void __iomem *scu_base, unsigned int mode) { unsigned int val; - int cpu = cpu_logical_map(smp_processor_id()); + int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0); if (mode > 3 || mode == 1 || cpu > 3) return -EINVAL; diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 49f335d..ae0c7bb 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -31,7 +31,6 @@ static void __iomem *twd_base; static struct clk *twd_clk; static unsigned long twd_timer_rate; -static bool common_setup_called; static DEFINE_PER_CPU(bool, percpu_setup_called); static struct clock_event_device __percpu **twd_evt; @@ -239,25 +238,28 @@ static irqreturn_t twd_handler(int irq, void *dev_id) return IRQ_NONE; } -static struct clk *twd_get_clock(void) +static void twd_get_clock(struct device_node *np) { - struct clk *clk; int err; - clk = clk_get_sys("smp_twd", NULL); - if (IS_ERR(clk)) { - pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk)); - return clk; + if (np) + twd_clk = of_clk_get(np, 0); + else + twd_clk = clk_get_sys("smp_twd", NULL); + + if (IS_ERR(twd_clk)) { + pr_err("smp_twd: clock not found %d\n", (int) PTR_ERR(twd_clk)); + return; } - err = clk_prepare_enable(clk); + err = clk_prepare_enable(twd_clk); if (err) { pr_err("smp_twd: clock failed to prepare+enable: %d\n", err); - clk_put(clk); - return ERR_PTR(err); + clk_put(twd_clk); + return; } - return clk; + twd_timer_rate = clk_get_rate(twd_clk); } /* @@ -280,26 +282,7 @@ static int __cpuinit twd_timer_setup(struct clock_event_device *clk) } per_cpu(percpu_setup_called, cpu) = true; - /* - * This stuff only need to be done once for the entire TWD cluster - * during the runtime of the system. - */ - if (!common_setup_called) { - twd_clk = twd_get_clock(); - - /* - * We use IS_ERR_OR_NULL() here, because if the clock stubs - * are active we will get a valid clk reference which is - * however NULL and will return the rate 0. In that case we - * need to calibrate the rate instead. - */ - if (!IS_ERR_OR_NULL(twd_clk)) - twd_timer_rate = clk_get_rate(twd_clk); - else - twd_calibrate_rate(); - - common_setup_called = true; - } + twd_calibrate_rate(); /* * The following is done once per CPU the first time .setup() is @@ -330,7 +313,7 @@ static struct local_timer_ops twd_lt_ops __cpuinitdata = { .stop = twd_timer_stop, }; -static int __init twd_local_timer_common_register(void) +static int __init twd_local_timer_common_register(struct device_node *np) { int err; @@ -350,6 +333,8 @@ static int __init twd_local_timer_common_register(void) if (err) goto out_irq; + twd_get_clock(np); + return 0; out_irq: @@ -373,7 +358,7 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt) if (!twd_base) return -ENOMEM; - return twd_local_timer_common_register(); + return twd_local_timer_common_register(NULL); } #ifdef CONFIG_OF @@ -405,7 +390,7 @@ void __init twd_local_timer_of_register(void) goto out; } - err = twd_local_timer_common_register(); + err = twd_local_timer_common_register(np); out: WARN(err, "twd_local_timer_of_register failed (%d)\n", err); diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index 9107691..5ac9e93 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -25,35 +25,44 @@ #define DAVINCI_CPUIDLE_MAX_STATES 2 -struct davinci_ops { - void (*enter) (u32 flags); - void (*exit) (u32 flags); - u32 flags; -}; +static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); +static void __iomem *ddr2_reg_base; +static bool ddr2_pdown; + +static void davinci_save_ddr_power(int enter, bool pdown) +{ + u32 val; + + val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET); + + if (enter) { + if (pdown) + val |= DDR2_SRPD_BIT; + else + val &= ~DDR2_SRPD_BIT; + val |= DDR2_LPMODEN_BIT; + } else { + val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT); + } + + __raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET); +} /* Actual code that puts the SoC in different idle states */ static int davinci_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; - struct davinci_ops *ops = cpuidle_get_statedata(state_usage); - - if (ops && ops->enter) - ops->enter(ops->flags); + davinci_save_ddr_power(1, ddr2_pdown); index = cpuidle_wrap_enter(dev, drv, index, arm_cpuidle_simple_enter); - if (ops && ops->exit) - ops->exit(ops->flags); + davinci_save_ddr_power(0, ddr2_pdown); return index; } -/* fields in davinci_ops.flags */ -#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0) - static struct cpuidle_driver davinci_idle_driver = { .name = "cpuidle-davinci", .owner = THIS_MODULE, @@ -70,45 +79,6 @@ static struct cpuidle_driver davinci_idle_driver = { .state_count = DAVINCI_CPUIDLE_MAX_STATES, }; -static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); -static void __iomem *ddr2_reg_base; - -static void davinci_save_ddr_power(int enter, bool pdown) -{ - u32 val; - - val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET); - - if (enter) { - if (pdown) - val |= DDR2_SRPD_BIT; - else - val &= ~DDR2_SRPD_BIT; - val |= DDR2_LPMODEN_BIT; - } else { - val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT); - } - - __raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET); -} - -static void davinci_c2state_enter(u32 flags) -{ - davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN)); -} - -static void davinci_c2state_exit(u32 flags) -{ - davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN)); -} - -static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = { - [1] = { - .enter = davinci_c2state_enter, - .exit = davinci_c2state_exit, - }, -}; - static int __init davinci_cpuidle_probe(struct platform_device *pdev) { int ret; @@ -124,11 +94,7 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) ddr2_reg_base = pdata->ddr2_ctlr_base; - if (pdata->ddr2_pdown) - davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN; - cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]); - - device->state_count = DAVINCI_CPUIDLE_MAX_STATES; + ddr2_pdown = pdata->ddr2_pdown; ret = cpuidle_register_driver(&davinci_idle_driver); if (ret) { diff --git a/arch/arm/mach-exynos/include/mach/cpufreq.h b/arch/arm/mach-exynos/include/mach/cpufreq.h index 7517c3f..b5d39dd 100644 --- a/arch/arm/mach-exynos/include/mach/cpufreq.h +++ b/arch/arm/mach-exynos/include/mach/cpufreq.h @@ -18,12 +18,25 @@ enum cpufreq_level_index { L20, }; +#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \ + { \ + .freq = (f) * 1000, \ + .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \ + (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \ + .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \ + .mps = ((m) << 16 | (p) << 8 | (s)), \ + } + +struct apll_freq { + unsigned int freq; + u32 clk_div_cpu0; + u32 clk_div_cpu1; + u32 mps; +}; + struct exynos_dvfs_info { unsigned long mpll_freq_khz; unsigned int pll_safe_idx; - unsigned int pm_lock_idx; - unsigned int max_support_idx; - unsigned int min_support_idx; struct clk *cpu_clk; unsigned int *volt_table; struct cpufreq_frequency_table *freq_table; diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 551c97e..44b12f9 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,5 +1,7 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC @@ -11,5 +13,7 @@ config ARCH_HIGHBANK select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select HAVE_SMP + select MAILBOX + select PL320_MBOX select SPARSE_IRQ select USE_OF diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index 80235b4..3f65206 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -2,7 +2,6 @@ #define __HIGHBANK_CORE_H extern void highbank_set_cpu_jump(int cpu, void *jump_addr); -extern void highbank_clocks_init(void); extern void highbank_restart(char, const char *); extern void __iomem *scu_base_addr; diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 981dc1e..65656ff 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -25,9 +25,11 @@ #include <linux/of_address.h> #include <linux/smp.h> #include <linux/amba/bus.h> +#include <linux/clk-provider.h> #include <asm/arch_timer.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #include <asm/smp_plat.h> #include <asm/smp_twd.h> #include <asm/hardware/arm_timer.h> @@ -59,7 +61,7 @@ static void __init highbank_scu_map_io(void) void highbank_set_cpu_jump(int cpu, void *jump_addr) { - cpu = cpu_logical_map(cpu); + cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0); writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu)); __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), @@ -116,7 +118,7 @@ static void __init highbank_timer_init(void) WARN_ON(!timer_base); irq = irq_of_parse_and_map(np, 0); - highbank_clocks_init(); + of_clk_init(NULL); lookup.clk = of_clk_get(np, 0); clkdev_add(&lookup); diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h index 70af9d1..5995df7 100644 --- a/arch/arm/mach-highbank/sysregs.h +++ b/arch/arm/mach-highbank/sysregs.h @@ -37,7 +37,7 @@ extern void __iomem *sregs_base; static inline void highbank_set_core_pwr(void) { - int cpu = cpu_logical_map(smp_processor_id()); + int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0); if (scu_base_addr) scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); else @@ -46,7 +46,7 @@ static inline void highbank_set_core_pwr(void) static inline void highbank_clear_core_pwr(void) { - int cpu = cpu_logical_map(smp_processor_id()); + int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0); if (scu_base_addr) scu_power_mode(scu_base_addr, SCU_PM_NORMAL); else diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 7be3622..2d93d8b 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -351,12 +351,10 @@ static void omap3_pm_idle(void) if (omap_irq_pending()) goto out; - trace_power_start(POWER_CSTATE, 1, smp_processor_id()); trace_cpu_idle(1, smp_processor_id()); omap_sram_idle(); - trace_power_end(smp_processor_id()); trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); out: diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 3fdd008..8709a39 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -7,3 +7,4 @@ config ARCH_SUNXI select PINCTRL select SPARSE_IRQ select SUNXI_TIMER + select PINCTRL_SUNXI
\ No newline at end of file diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index a74d3c7..a36a03d 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -243,8 +243,7 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) /* FIXME: what's the actual transition time? */ policy->cpuinfo.transition_latency = 300 * 1000; - policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; - cpumask_copy(policy->related_cpus, cpu_possible_mask); + cpumask_copy(policy->cpus, cpu_possible_mask); if (policy->cpu == 0) register_pm_notifier(&tegra_cpu_pm_notifier); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 5dea906..3e5bbd0 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -11,6 +11,7 @@ config UX500_SOC_COMMON select COMMON_CLK select PINCTRL select PINCTRL_NOMADIK + select PINCTRL_ABX500 select PL310_ERRATA_753970 if CACHE_PL310 config UX500_SOC_DB8500 @@ -18,6 +19,11 @@ config UX500_SOC_DB8500 select CPU_FREQ_TABLE if CPU_FREQ select MFD_DB8500_PRCMU select PINCTRL_DB8500 + select PINCTRL_DB8540 + select PINCTRL_AB8500 + select PINCTRL_AB8505 + select PINCTRL_AB9540 + select PINCTRL_AB8540 select REGULATOR select REGULATOR_DB8500_PRCMU diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index d453522..b8781ca 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -90,26 +90,8 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = { }, }; -static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { +static struct abx500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_PIN_GPIO(1), - .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, - /* config_reg is the initial configuration of ab8500 pins. - * The pins can be configured as GPIO or alt functions based - * on value present in GpioSel1 to GpioSel6 and AlternatFunction - * register. This is the array of 7 configuration settings. - * One has to compile time decide these settings. Below is the - * explanation of these setting - * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO - * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO - * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO - * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO - * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO - * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO - * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured - * as GPIO then this register selectes the alternate fucntions - */ - .config_reg = {0x00, 0x1E, 0x80, 0x01, - 0x7A, 0x00, 0x00}, }; /* ab8500-codec */ diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 5b286e0..b80ad96 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -285,7 +285,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,nmk_pinctrl", U8500_PRCMU_BASE, + OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), /* Requires clock name and DMA bindings. */ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 7d34c52..d526dd8 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -38,15 +38,7 @@ #define MOP500_STMPE1601_IRQ_END \ MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) -/* AB8500 virtual gpio IRQ */ -#define AB8500_VIR_GPIO_NR_IRQS 16 - -#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \ - MOP500_STMPE1601_IRQ_END -#define MOP500_AB8500_VIR_GPIO_IRQ_END \ - (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS) - -#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END +#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ_END #define MOP500_IRQ_END MOP500_NR_IRQS |