summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig4
-rw-r--r--arch/arm/mach-at91/Makefile2
-rw-r--r--arch/arm/mach-at91/board-pcontrol-g20.c98
-rw-r--r--arch/arm/mach-at91/board-stamp9g20.c82
-rw-r--r--arch/arm/mach-at91/clock.c2
-rw-r--r--arch/arm/mach-at91/include/mach/stamp9g20.h7
-rw-r--r--arch/arm/mach-mmp/mmp2.c1
-rw-r--r--arch/arm/mach-omap2/board-zoom-peripherals.c2
-rw-r--r--arch/arm/mach-omap2/io.c2
-rw-r--r--arch/arm/mach-omap2/pm-debug.c34
-rw-r--r--arch/arm/mach-omap2/pm24xx.c34
-rw-r--r--arch/arm/mach-omap2/pm34xx.c27
-rw-r--r--arch/arm/mach-omap2/prcm-common.h11
-rw-r--r--arch/arm/mach-pxa/palmtx.c3
-rw-r--r--arch/arm/mm/cache-v6.S28
-rw-r--r--arch/arm/mm/cache-v7.S27
-rw-r--r--arch/arm/mm/proc-macros.S22
-rw-r--r--arch/arm/plat-omap/counter_32k.c3
-rw-r--r--arch/arm/plat-omap/sram.c2
-rw-r--r--arch/arm/tools/mach-types183
20 files changed, 370 insertions, 204 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f1d9297..d56d21c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1311,7 +1311,7 @@ config HZ
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode"
- depends on CPU_V7 && EXPERIMENTAL
+ depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
help
@@ -1759,7 +1759,7 @@ comment "At least one emulation must be selected"
config FPE_NWFPE
bool "NWFPE math emulation"
- depends on !AEABI || OABI_COMPAT
+ depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
---help---
Say Y to include the NWFPE floating point emulator in the kernel.
This is necessary to run most binaries. Linux does not currently
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 62d686f..d13add7 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o
+obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index bba5a56..feb6578 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -31,6 +31,7 @@
#include <mach/board.h>
#include <mach/at91sam9_smc.h>
+#include <mach/stamp9g20.h>
#include "sam9_smc.h"
#include "generic.h"
@@ -38,11 +39,7 @@
static void __init pcontrol_g20_map_io(void)
{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */
- at91_register_uart(0, 0, 0);
+ stamp9g20_map_io();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
@@ -54,9 +51,6 @@ static void __init pcontrol_g20_map_io(void)
/* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
@@ -66,38 +60,6 @@ static void __init init_irq(void)
}
-/*
- * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB
- */
-static struct atmel_nand_data __initdata nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
-};
-
-/*
- * Bus timings; unit = 7.57ns
- */
-static struct sam9_smc_config __initdata nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 3,
-};
-
static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
.ncs_read_setup = 16,
.nrd_setup = 18,
@@ -138,14 +100,6 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
.tdf_cycles = 1,
} };
-static void __init add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &nand_smc_config);
- at91_add_device_nand(&nand_data);
-}
-
-
static void __init add_device_pcontrol(void)
{
/* configure chip-select 4 (IO compatible to 8051 X4 ) */
@@ -156,23 +110,6 @@ static void __init add_device_pcontrol(void)
/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata mmc_data = {
- .slot[0] = {
- .bus_width = 4,
- },
-};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
- .wire4 = 1,
-};
-#endif
-
-
-/*
* USB Host port
*/
static struct at91_usbh_data __initdata usbh_data = {
@@ -265,42 +202,13 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = {
};
-/*
- * Dallas 1-Wire DS2431
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
- .pin = AT91_PIN_PA29,
- .is_open_drain = 1,
-};
-
-static struct platform_device w1_device = {
- .name = "w1-gpio",
- .id = -1,
- .dev.platform_data = &w1_gpio_pdata,
-};
-
-static void add_wire1(void)
-{
- at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
- at91_set_multi_drive(w1_gpio_pdata.pin, 1);
- platform_device_register(&w1_device);
-}
-
-
static void __init pcontrol_g20_board_init(void)
{
- at91_add_device_serial();
- add_device_nand();
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
- at91_add_device_mci(0, &mmc_data);
-#else
- at91_add_device_mmc(0, &mmc_data);
-#endif
+ stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_eth(&macb_data);
at91_add_device_i2c(pcontrol_g20_i2c_devices,
ARRAY_SIZE(pcontrol_g20_i2c_devices));
- add_wire1();
add_device_pcontrol();
at91_add_device_spi(pcontrol_g20_spi_devices,
ARRAY_SIZE(pcontrol_g20_spi_devices));
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 5206eef..f8902b1 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -32,7 +32,7 @@
#include "generic.h"
-static void __init portuxg20_map_io(void)
+void __init stamp9g20_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
@@ -40,6 +40,24 @@ static void __init portuxg20_map_io(void)
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init stamp9g20evb_map_io(void)
+{
+ stamp9g20_map_io();
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+}
+
+static void __init portuxg20_map_io(void)
+{
+ stamp9g20_map_io();
+
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR
@@ -56,26 +74,6 @@ static void __init portuxg20_map_io(void)
/* USART5 on ttyS6. (Rx, Tx only) */
at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init stamp9g20_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static void __init init_irq(void)
@@ -156,7 +154,7 @@ static struct at91_udc_data __initdata portuxg20_udc_data = {
.pullup_pin = 0, /* pull-up driven by UDC */
};
-static struct at91_udc_data __initdata stamp9g20_udc_data = {
+static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
.vbus_pin = AT91_PIN_PA22,
.pullup_pin = 0, /* pull-up driven by UDC */
};
@@ -190,7 +188,7 @@ static struct gpio_led portuxg20_leds[] = {
}
};
-static struct gpio_led stamp9g20_leds[] = {
+static struct gpio_led stamp9g20evb_leds[] = {
{
.name = "D8",
.gpio = AT91_PIN_PB18,
@@ -250,7 +248,7 @@ void add_w1(void)
}
-static void __init generic_board_init(void)
+void __init stamp9g20_board_init(void)
{
/* Serial */
at91_add_device_serial();
@@ -262,34 +260,40 @@ static void __init generic_board_init(void)
#else
at91_add_device_mmc(0, &mmc_data);
#endif
- /* USB Host */
- at91_add_device_usbh(&usbh_data);
- /* Ethernet */
- at91_add_device_eth(&macb_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
/* W1 */
add_w1();
}
static void __init portuxg20_board_init(void)
{
- generic_board_init();
- /* SPI */
- at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+ stamp9g20_board_init();
+ /* USB Host */
+ at91_add_device_usbh(&usbh_data);
/* USB Device */
at91_add_device_udc(&portuxg20_udc_data);
+ /* Ethernet */
+ at91_add_device_eth(&macb_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* SPI */
+ at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
/* LEDs */
at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
}
-static void __init stamp9g20_board_init(void)
+static void __init stamp9g20evb_board_init(void)
{
- generic_board_init();
+ stamp9g20_board_init();
+ /* USB Host */
+ at91_add_device_usbh(&usbh_data);
/* USB Device */
- at91_add_device_udc(&stamp9g20_udc_data);
+ at91_add_device_udc(&stamp9g20evb_udc_data);
+ /* Ethernet */
+ at91_add_device_eth(&macb_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
/* LEDs */
- at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+ at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
}
MACHINE_START(PORTUXG20, "taskit PortuxG20")
@@ -305,7 +309,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
/* Maintainer: taskit GmbH */
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = stamp9g20_map_io,
+ .map_io = stamp9g20evb_map_io,
.init_irq = init_irq,
- .init_machine = stamp9g20_board_init,
+ .init_machine = stamp9g20evb_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 7525cee..9113da6 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -658,7 +658,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
/* Now set uhpck values */
uhpck.parent = &utmi_clk;
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- uhpck.rate_hz = utmi_clk.parent->rate_hz;
+ uhpck.rate_hz = utmi_clk.rate_hz;
uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
}
diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h
new file mode 100644
index 0000000..6120f9c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/stamp9g20.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_STAMP9G20_H
+#define __MACH_STAMP9G20_H
+
+void stamp9g20_map_io(void);
+void stamp9g20_board_init(void);
+
+#endif
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index daf3993..2e3dd08 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
static APMU_CLK(nand, NAND, 0xbf, 100000000);
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 86c9b21..9db9203 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "wl1271",
.mmc = 3,
- .caps = MMC_CAP_4_BIT_DATA,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 40562dd..a1939b1 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -297,7 +297,7 @@ static int __init _omap2_init_reprogram_sdrc(void)
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
- if (!dpll3_m2_ck)
+ if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 5e81517..a8afb61 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -161,6 +161,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+ u32 tick_rate, cycles;
+
+ if (!seconds && !milliseconds)
+ return;
+
+ tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+ cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+ omap_dm_timer_stop(gptimer_wakeup);
+ omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+ pr_info("PM: Resume timer in %u.%03u secs"
+ " (%d ticks at %d ticks/sec.)\n",
+ seconds, milliseconds, cycles, tick_rate);
+}
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -354,23 +371,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
pwrdm->timer = t;
}
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
- u32 tick_rate, cycles;
-
- if (!seconds && !milliseconds)
- return;
-
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
- cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
- omap_dm_timer_stop(gptimer_wakeup);
- omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
- pr_info("PM: Resume timer in %u.%03u secs"
- " (%d ticks at %d ticks/sec.)\n",
- seconds, milliseconds, cycles, tick_rate);
-}
-
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index c85923e..aaeea49 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -53,6 +53,19 @@
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+ return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+ return false;
+}
+#endif
+
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
@@ -120,8 +133,9 @@ static void omap2_enter_full_retention(void)
goto no_sleep;
/* Block console output in case it is on one of the OMAP UARTs */
- if (try_acquire_console_sem())
- goto no_sleep;
+ if (!is_suspending())
+ if (try_acquire_console_sem())
+ goto no_sleep;
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
@@ -136,7 +150,8 @@ static void omap2_enter_full_retention(void)
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
- release_console_sem();
+ if (!is_suspending())
+ release_console_sem();
no_sleep:
if (omap2_pm_debug) {
@@ -284,6 +299,12 @@ out:
local_irq_enable();
}
+static int omap2_pm_begin(suspend_state_t state)
+{
+ suspend_state = state;
+ return 0;
+}
+
static int omap2_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
@@ -333,10 +354,17 @@ static void omap2_pm_finish(void)
enable_hlt();
}
+static void omap2_pm_end(void)
+{
+ suspend_state = PM_SUSPEND_ON;
+}
+
static struct platform_suspend_ops omap_pm_ops = {
+ .begin = omap2_pm_begin,
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
+ .end = omap2_pm_end,
.valid = suspend_valid_only_mem,
};
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0ec8a04..648b8c5 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -50,6 +50,19 @@
#include "sdrc.h"
#include "control.h"
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+ return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+ return false;
+}
+#endif
+
/* Scratchpad offsets */
#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
@@ -387,10 +400,11 @@ void omap_sram_idle(void)
}
/* Block console output in case it is on one of the OMAP UARTs */
- if (per_next_state < PWRDM_POWER_ON ||
- core_next_state < PWRDM_POWER_ON)
- if (try_acquire_console_sem())
- goto console_still_active;
+ if (!is_suspending())
+ if (per_next_state < PWRDM_POWER_ON ||
+ core_next_state < PWRDM_POWER_ON)
+ if (try_acquire_console_sem())
+ goto console_still_active;
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
@@ -470,7 +484,8 @@ void omap_sram_idle(void)
omap_uart_resume_idle(3);
}
- release_console_sem();
+ if (!is_suspending())
+ release_console_sem();
console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
@@ -514,8 +529,6 @@ out:
}
#ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state;
-
static int omap3_pm_prepare(void)
{
disable_hlt();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 298a22a..f81acee 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -243,13 +243,14 @@
#define OMAP24XX_EN_GPT1_MASK (1 << 0)
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2)
-#define OMAP24XX_ST_GPIOS_MASK 2
-#define OMAP24XX_ST_GPT1_SHIFT (1 << 0)
-#define OMAP24XX_ST_GPT1_MASK 0
+#define OMAP24XX_ST_GPIOS_SHIFT 2
+#define OMAP24XX_ST_GPIOS_MASK (1 << 2)
+#define OMAP24XX_ST_GPT1_SHIFT 0
+#define OMAP24XX_ST_GPT1_MASK (1 << 0)
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT (1 << 0)
+#define OMAP2430_ST_MDM_SHIFT 0
+#define OMAP2430_ST_MDM_MASK (1 << 0)
/* 3430 register bits shared between CM & PRM registers */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index d2060a1..e5c9932 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {}
/******************************************************************************
* NAND Flash
******************************************************************************/
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 99fa688..c96fa1b 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -203,6 +203,10 @@ ENTRY(v6_flush_kern_dcache_area)
* - end - virtual end address of region
*/
v6_dma_inv_range:
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrb r2, [r0] @ read for ownership
+ strb r2, [r0] @ write for ownership
+#endif
tst r0, #D_CACHE_LINE_SIZE - 1
bic r0, r0, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
@@ -211,6 +215,10 @@ v6_dma_inv_range:
mcrne p15, 0, r0, c7, c11, 1 @ clean unified line
#endif
tst r1, #D_CACHE_LINE_SIZE - 1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrneb r2, [r1, #-1] @ read for ownership
+ strneb r2, [r1, #-1] @ write for ownership
+#endif
bic r1, r1, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line
@@ -218,10 +226,6 @@ v6_dma_inv_range:
mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line
#endif
1:
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldr r2, [r0] @ read for ownership
- str r2, [r0] @ write for ownership
-#endif
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c6, 1 @ invalidate D line
#else
@@ -229,6 +233,10 @@ v6_dma_inv_range:
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrlo r2, [r0] @ read for ownership
+ strlo r2, [r0] @ write for ownership
+#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
@@ -263,12 +271,12 @@ v6_dma_clean_range:
* - end - virtual end address of region
*/
ENTRY(v6_dma_flush_range)
- bic r0, r0, #D_CACHE_LINE_SIZE - 1
-1:
#ifdef CONFIG_DMA_CACHE_RWFO
- ldr r2, [r0] @ read for ownership
- str r2, [r0] @ write for ownership
+ ldrb r2, [r0] @ read for ownership
+ strb r2, [r0] @ write for ownership
#endif
+ bic r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
#else
@@ -276,6 +284,10 @@ ENTRY(v6_dma_flush_range)
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrlob r2, [r0] @ read for ownership
+ strlob r2, [r0] @ write for ownership
+#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index a3ebf7a..6136e68 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -173,15 +173,22 @@ ENTRY(v7_coherent_user_range)
UNWIND(.fnstart )
dcache_line_size r2, r3
sub r3, r2, #1
- bic r0, r0, r3
+ bic r12, r0, r3
1:
- USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
+ USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification
+ add r12, r12, r2
+ cmp r12, r1
+ blo 1b
dsb
- USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
- add r0, r0, r2
+ icache_line_size r2, r3
+ sub r3, r2, #1
+ bic r12, r0, r3
2:
- cmp r0, r1
- blo 1b
+ USER( mcr p15, 0, r12, c7, c5, 1 ) @ invalidate I line
+ add r12, r12, r2
+ cmp r12, r1
+ blo 2b
+3:
mov r0, #0
ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable
ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB
@@ -194,10 +201,10 @@ ENTRY(v7_coherent_user_range)
* isn't mapped, just try the next page.
*/
9001:
- mov r0, r0, lsr #12
- mov r0, r0, lsl #12
- add r0, r0, #4096
- b 2b
+ mov r12, r12, lsr #12
+ mov r12, r12, lsl #12
+ add r12, r12, #4096
+ b 3b
UNWIND(.fnend )
ENDPROC(v7_coherent_kern_range)
ENDPROC(v7_coherent_user_range)
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 7d63bea..b795afd 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -61,17 +61,27 @@
.endm
/*
- * cache_line_size - get the cache line size from the CSIDR register
- * (available on ARMv7+). It assumes that the CSSR register was configured
- * to access the L1 data cache CSIDR.
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
*/
.macro dcache_line_size, reg, tmp
- mrc p15, 1, \tmp, c0, c0, 0 @ read CSIDR
- and \tmp, \tmp, #7 @ cache line size encoding
- mov \reg, #16 @ size offset
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+ lsr \tmp, \tmp, #16
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
mov \reg, \reg, lsl \tmp @ actual cache line size
.endm
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register
+ * on ARMv7.
+ */
+ .macro icache_line_size, reg, tmp
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
+ mov \reg, \reg, lsl \tmp @ actual cache line size
+ .endm
/*
* Sanity check the PTE configuration for the code below - which makes
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 155fe43..8722a13 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/err.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -164,7 +165,7 @@ static int __init omap_init_clocksource_32k(void)
return -ENODEV;
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
- if (sync_32k_ick)
+ if (!IS_ERR(sync_32k_ick))
clk_enable(sync_32k_ick);
clocksource_32k.mult = clocksource_hz2mult(32768,
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index e2c8eeb..74dac41 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -166,7 +166,7 @@ static void __init omap_detect_sram(void)
cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else if (cpu_is_omap1611())
- omap_sram_size = 0x3e800; /* 250K */
+ omap_sram_size = SZ_256K;
else {
printk(KERN_ERR "Could not detect SRAM size\n");
omap_sram_size = 0x4000;
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 55590a4..2fea897 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Thu Sep 9 22:43:01 2010
+# Last update: Sun Dec 12 23:24:27 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -2321,7 +2321,7 @@ mx31txtr MACH_MX31TXTR MX31TXTR 2332
u380 MACH_U380 U380 2333
oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334
npcmx50 MACH_NPCMX50 NPCMX50 2335
-mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336
+mx51_efikamx MACH_MX51_EFIKAMX MX51_EFIKAMX 2336
mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337
riom MACH_RIOM RIOM 2338
comcas MACH_COMCAS COMCAS 2339
@@ -2355,7 +2355,7 @@ at91sam9263cs MACH_AT91SAM9263CS AT91SAM9263CS 2366
csb732 MACH_CSB732 CSB732 2367
u8500 MACH_U8500 U8500 2368
huqiu MACH_HUQIU HUQIU 2369
-mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370
+mx51_efikasb MACH_MX51_EFIKASB MX51_EFIKASB 2370
pmt1g MACH_PMT1G PMT1G 2371
htcelf MACH_HTCELF HTCELF 2372
armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373
@@ -2971,7 +2971,7 @@ premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985
wasabi MACH_WASABI WASABI 2986
vivow MACH_VIVOW VIVOW 2987
mx50_rdp MACH_MX50_RDP MX50_RDP 2988
-universal MACH_UNIVERSAL UNIVERSAL 2989
+universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989
real6410 MACH_REAL6410 REAL6410 2990
spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991
ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992
@@ -3044,3 +3044,178 @@ harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059
msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060
spear900 MACH_SPEAR900 SPEAR900 3061
pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062
+rdstor MACH_RDSTOR RDSTOR 3063
+usdloader MACH_USDLOADER USDLOADER 3064
+tsoploader MACH_TSOPLOADER TSOPLOADER 3065
+kronos MACH_KRONOS KRONOS 3066
+ffcore MACH_FFCORE FFCORE 3067
+mone MACH_MONE MONE 3068
+unit2s MACH_UNIT2S UNIT2S 3069
+acer_a5 MACH_ACER_A5 ACER_A5 3070
+etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071
+stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072
+p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073
+tulip MACH_TULIP TULIP 3074
+sunflower MACH_SUNFLOWER SUNFLOWER 3075
+rib MACH_RIB RIB 3076
+clod MACH_CLOD CLOD 3077
+rump MACH_RUMP RUMP 3078
+tenderloin MACH_TENDERLOIN TENDERLOIN 3079
+shortloin MACH_SHORTLOIN SHORTLOIN 3080
+crespo MACH_CRESPO CRESPO 3081
+antares MACH_ANTARES ANTARES 3082
+wb40n MACH_WB40N WB40N 3083
+herring MACH_HERRING HERRING 3084
+naxy400 MACH_NAXY400 NAXY400 3085
+naxy1200 MACH_NAXY1200 NAXY1200 3086
+vpr200 MACH_VPR200 VPR200 3087
+bug20 MACH_BUG20 BUG20 3088
+goflexnet MACH_GOFLEXNET GOFLEXNET 3089
+torbreck MACH_TORBRECK TORBRECK 3090
+saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091
+callisto MACH_CALLISTO CALLISTO 3092
+multhsu MACH_MULTHSU MULTHSU 3093
+saluda MACH_SALUDA SALUDA 3094
+pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095
+vc0718 MACH_VC0718 VC0718 3096
+mvblx MACH_MVBLX MVBLX 3097
+inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098
+inhand_fury MACH_INHAND_FURY INHAND_FURY 3099
+inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100
+hdnvp MACH_HDNVP HDNVP 3101
+softwinner MACH_SOFTWINNER SOFTWINNER 3102
+prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
+nas6210 MACH_NAS6210 NAS6210 3104
+unisdev MACH_UNISDEV UNISDEV 3105
+sbca11 MACH_SBCA11 SBCA11 3106
+saga MACH_SAGA SAGA 3107
+ns_k330 MACH_NS_K330 NS_K330 3108
+tanna MACH_TANNA TANNA 3109
+imate8502 MACH_IMATE8502 IMATE8502 3110
+aspen MACH_ASPEN ASPEN 3111
+daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112
+zmx25 MACH_ZMX25 ZMX25 3113
+maple1 MACH_MAPLE1 MAPLE1 3114
+qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115
+qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116
+abilene MACH_ABILENE ABILENE 3117
+eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118
+iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119
+coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120
+santiago MACH_SANTIAGO SANTIAGO 3121
+mx257sol MACH_MX257SOL MX257SOL 3122
+strasbourg MACH_STRASBOURG STRASBOURG 3123
+msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124
+smartqv5 MACH_SMARTQV5 SMARTQV5 3125
+smartqv3 MACH_SMARTQV3 SMARTQV3 3126
+smartqv7 MACH_SMARTQV7 SMARTQV7 3127
+paz00 MACH_PAZ00 PAZ00 3128
+acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129
+htcwillow MACH_HTCWILLOW HTCWILLOW 3130
+fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131
+hdgu MACH_HDGU HDGU 3132
+pyramid MACH_PYRAMID PYRAMID 3133
+epiphan MACH_EPIPHAN EPIPHAN 3134
+omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135
+gurnard MACH_GURNARD GURNARD 3136
+gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137
+bcm2708 MACH_BCM2708 BCM2708 3138
+mx51_ggc MACH_MX51_GGC MX51_GGC 3139
+sharespace MACH_SHARESPACE SHARESPACE 3140
+haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141
+simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142
+crux MACH_CRUX CRUX 3143
+mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144
+charon MACH_CHARON CHARON 3145
+picocom3 MACH_PICOCOM3 PICOCOM3 3146
+picocom4 MACH_PICOCOM4 PICOCOM4 3147
+serrano MACH_SERRANO SERRANO 3148
+doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149
+evsy MACH_EVSY EVSY 3150
+huashan MACH_HUASHAN HUASHAN 3151
+lausanne MACH_LAUSANNE LAUSANNE 3152
+emerald MACH_EMERALD EMERALD 3153
+tqma35 MACH_TQMA35 TQMA35 3154
+marvel MACH_MARVEL MARVEL 3155
+manuae MACH_MANUAE MANUAE 3156
+chacha MACH_CHACHA CHACHA 3157
+lemon MACH_LEMON LEMON 3158
+csc MACH_CSC CSC 3159
+gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160
+t20 MACH_T20 T20 3161
+hdmini MACH_HDMINI HDMINI 3162
+sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163
+express MACH_EXPRESS EXPRESS 3164
+express_kt MACH_EXPRESS_KT EXPRESS_KT 3165
+maximasp MACH_MAXIMASP MAXIMASP 3166
+nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167
+nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168
+sunfire MACH_SUNFIRE SUNFIRE 3169
+arowana MACH_AROWANA AROWANA 3170
+tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171
+tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172
+edison MACH_EDISON EDISON 3173
+svp8500v1 MACH_SVP8500V1 SVP8500V1 3174
+svp8500v2 MACH_SVP8500V2 SVP8500V2 3175
+svp5500 MACH_SVP5500 SVP5500 3176
+b5500 MACH_B5500 B5500 3177
+s5500 MACH_S5500 S5500 3178
+icon MACH_ICON ICON 3179
+elephant MACH_ELEPHANT ELEPHANT 3180
+msm8x60_fusion MACH_MSM8X60_FUSION MSM8X60_FUSION 3181
+shooter MACH_SHOOTER SHOOTER 3182
+spade_lte MACH_SPADE_LTE SPADE_LTE 3183
+philhwani MACH_PHILHWANI PHILHWANI 3184
+gsncomm MACH_GSNCOMM GSNCOMM 3185
+strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186
+mmm MACH_MMM MMM 3187
+davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188
+ag5evm MACH_AG5EVM AG5EVM 3189
+sc575plc MACH_SC575PLC SC575PLC 3190
+sc575hmi MACH_SC575IPC SC575IPC 3191
+omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192
+g7 MACH_G7 G7 3193
+top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194
+top9000_su MACH_TOP9000_SU TOP9000_SU 3195
+utm300 MACH_UTM300 UTM300 3196
+tsunagi MACH_TSUNAGI TSUNAGI 3197
+ts75xx MACH_TS75XX TS75XX 3198
+msm8x60_fusn_ffa MACH_MSM8X60_FUSN_FFA MSM8X60_FUSN_FFA 3199
+ts47xx MACH_TS47XX TS47XX 3200
+da850_k5 MACH_DA850_K5 DA850_K5 3201
+ax502 MACH_AX502 AX502 3202
+igep0032 MACH_IGEP0032 IGEP0032 3203
+antero MACH_ANTERO ANTERO 3204
+synergy MACH_SYNERGY SYNERGY 3205
+ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206
+wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207
+punica MACH_PUNICA PUNICA 3208
+sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209
+mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210
+mackerel MACH_MACKEREL MACKEREL 3211
+fa9x27 MACH_FA9X27 FA9X27 3213
+ns2816tb MACH_NS2816TB NS2816TB 3214
+ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215
+ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216
+kaen MACH_KAEN KAEN 3217
+nv1000 MACH_NV1000 NV1000 3218
+nuc950ts MACH_NUC950TS NUC950TS 3219
+nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220
+ast2200 MACH_AST2200 AST2200 3221
+lead MACH_LEAD LEAD 3222
+unino1 MACH_UNINO1 UNINO1 3223
+greeco MACH_GREECO GREECO 3224
+verdi MACH_VERDI VERDI 3225
+dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226
+quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227
+abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228
+svcid MACH_SVCID SVCID 3229
+msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230
+msm8960_rumi3 MACH_MSM8960_RUMI3 MSM8960_RUMI3 3231
+icon_g MACH_ICON_G ICON_G 3232
+mb3 MACH_MB3 MB3 3233
+gsia18s MACH_GSIA18S GSIA18S 3234
+pivicc MACH_PIVICC PIVICC 3235
+pcm048 MACH_PCM048 PCM048 3236
+dds MACH_DDS DDS 3237
+chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238
generated by cgit v0.10.2 at 2024-11-06 13:54:07 (GMT)