diff options
Diffstat (limited to 'arch/arm')
1182 files changed, 23643 insertions, 35396 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 67874b8..6ec8eb3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -4,6 +4,7 @@ config ARM select ARCH_BINFMT_ELF_RANDOMIZE_PIE select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAVE_CUSTOM_GPIO_H + select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_WANT_IPC_PARSE_VERSION select BUILDTIME_EXTABLE_SORT if MMU select CPU_PM if (SUSPEND || CPU_IDLE) @@ -36,7 +37,6 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_IDE if PCI || ISA || PCMCIA - select HAVE_IRQ_WORK select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO @@ -56,6 +56,8 @@ config ARM select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND select MODULES_USE_ELF_REL select CLONE_BACKWARDS + select OLD_SIGSUSPEND3 + select OLD_SIGACTION help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -75,6 +77,27 @@ config ARM_DMA_USE_IOMMU select ARM_HAS_SG_CHAIN select NEED_SG_DMA_LENGTH +if ARM_DMA_USE_IOMMU + +config ARM_DMA_IOMMU_ALIGNMENT + int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" + range 4 9 + default 8 + help + DMA mapping framework by default aligns all buffers to the smallest + PAGE_SIZE order which is greater than or equal to the requested buffer + size. This works well for buffers up to a few hundreds kilobytes, but + for larger buffers it just a waste of address space. Drivers which has + relatively small addressing window (like 64Mib) might run out of + virtual space with just a few allocations. + + With this parameter you can specify the maximum PAGE_SIZE order for + DMA IOMMU buffers. Larger buffers will be aligned only to this + specified order. The order is expressed as a power of two multiplied + by the PAGE_SIZE. + +endif + config HAVE_PWM bool @@ -261,7 +284,8 @@ config MMU # choice prompt "ARM system type" - default ARCH_MULTIPLATFORM + default ARCH_VERSATILE if !MMU + default ARCH_MULTIPLATFORM if MMU config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" @@ -344,10 +368,10 @@ config ARCH_BCM2835 select ARM_ERRATA_411920 select ARM_TIMER_SP804 select CLKDEV_LOOKUP + select CLKSRC_OF select COMMON_CLK select CPU_V6 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select MULTI_IRQ_HANDLER select PINCTRL select PINCTRL_BCM2835 @@ -393,6 +417,7 @@ config ARCH_GEMINI config ARCH_SIRF bool "CSR SiRF" select ARCH_REQUIRE_GPIOLIB + select AUTO_ZRELADDR select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP @@ -640,11 +665,12 @@ config ARCH_LPC32XX config ARCH_TEGRA bool "NVIDIA Tegra" select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 @@ -698,6 +724,7 @@ config ARCH_SHMOBILE select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select NO_IOPORT + select PINCTRL select PM_GENERIC_DOMAINS if PM select SPARSE_IRQ help @@ -744,7 +771,6 @@ config ARCH_S3C24XX select ARCH_HAS_CPUFREQ select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -787,7 +813,6 @@ config ARCH_S5P64X0 select CLKSRC_MMIO select CPU_V6 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -802,7 +827,6 @@ config ARCH_S5PC100 select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP select CPU_V7 - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -820,7 +844,6 @@ config ARCH_S5PV210 select CLKSRC_MMIO select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -838,7 +861,6 @@ config ARCH_EXYNOS select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -873,7 +895,6 @@ config ARCH_U300 select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_TCM select SPARSE_IRQ help @@ -899,10 +920,12 @@ config ARCH_NOMADIK select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC + select CLKSRC_NOMADIK_MTU select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS select MIGHT_HAVE_CACHE_L2X0 + select USE_OF select PINCTRL select PINCTRL_STN8815 select SPARSE_IRQ @@ -937,33 +960,24 @@ config ARCH_DAVINCI help Support for TI's DaVinci platform. -config ARCH_OMAP - bool "TI OMAP" +config ARCH_OMAP1 + bool "TI OMAP1" depends on MMU select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Support for TI's OMAP platform (OMAP1/2/3/4). - -config ARCH_VT8500_SINGLE - bool "VIA/WonderMedia 85xx" - select ARCH_HAS_CPUFREQ + select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select COMMON_CLK - select CPU_ARM926T + select CLKSRC_MMIO select GENERIC_CLOCKEVENTS - select GENERIC_GPIO + select GENERIC_IRQ_CHIP select HAVE_CLK - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - select USE_OF + select HAVE_IDE + select IRQ_DOMAIN + select NEED_MACH_IO_H if PCCARD + select NEED_MACH_MEMORY_H help - Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. + Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) endchoice @@ -1086,17 +1100,12 @@ source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" -source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/plat-spear/Kconfig" source "arch/arm/mach-s3c24xx/Kconfig" -if ARCH_S3C24XX -source "arch/arm/mach-s3c2412/Kconfig" -source "arch/arm/mach-s3c2440/Kconfig" -endif if ARCH_S3C64XX source "arch/arm/mach-s3c64xx/Kconfig" @@ -1127,6 +1136,8 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/plat-versatile/Kconfig" +source "arch/arm/mach-virt/Kconfig" + source "arch/arm/mach-vt8500/Kconfig" source "arch/arm/mach-w90x900/Kconfig" @@ -1450,6 +1461,10 @@ config ISA_DMA bool select ISA_DMA_API +config ARCH_NO_VIRT_TO_BUS + def_bool y + depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK + # Select ISA DMA interface config ISA_DMA_API bool @@ -1531,7 +1546,6 @@ config SMP config SMP_ON_UP bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" - depends on EXPERIMENTAL depends on SMP && !XIP_KERNEL default y help @@ -1572,9 +1586,10 @@ config HAVE_ARM_SCU help This option enables support for the ARM system coherency unit -config ARM_ARCH_TIMER +config HAVE_ARM_ARCH_TIMER bool "Architected timer support" depends on CPU_V7 + select ARM_ARCH_TIMER help This option enables support for the ARM architected timer @@ -1620,6 +1635,16 @@ config HOTPLUG_CPU Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. +config ARM_PSCI + bool "Support for the ARM Power State Coordination Interface (PSCI)" + depends on CPU_V7 + help + Say Y here if you want Linux to communicate with system firmware + implementing the PSCI specification for CPU-centric power + management operations described in ARM document number ARM DEN + 0022A ("Power State Coordination Interface System Software on + ARM processors"). + config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP @@ -1637,7 +1662,7 @@ config ARCH_NR_GPIO default 355 if ARCH_U8500 default 264 if MACH_H4700 default 512 if SOC_OMAP5 - default 288 if ARCH_VT8500 + default 288 if ARCH_VT8500 || ARCH_SUNXI default 0 help Maximum number of GPIOs in the system. @@ -1655,6 +1680,9 @@ config HZ default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE default 100 +config SCHED_HRTICK + def_bool HIGH_RES_TIMERS + config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode" depends on CPU_V7 && !CPU_V6 && !CPU_V6K @@ -1719,7 +1747,7 @@ config AEABI config OABI_COMPAT bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL + depends on AEABI && !THUMB2_KERNEL default y help This option preserves the old syscall interface along with the @@ -1843,7 +1871,6 @@ config SECCOMP config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - depends on EXPERIMENTAL help This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on @@ -1860,7 +1887,7 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" - depends on EXPERIMENTAL && ARM && OF + depends on ARM && OF depends on CPU_V7 && !CPU_V6 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. @@ -1929,7 +1956,7 @@ config ZBOOT_ROM choice prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" - depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL + depends on ZBOOT_ROM && ARCH_SH7372 default ZBOOT_ROM_NONE help Include experimental SD/MMC loading code in the ROM-able zImage. @@ -1958,7 +1985,7 @@ endchoice config ARM_APPENDED_DTB bool "Use appended device tree blob to zImage (EXPERIMENTAL)" - depends on OF && !ZBOOT_ROM && EXPERIMENTAL + depends on OF && !ZBOOT_ROM help With this option, the boot code will look for a device tree binary (DTB) appended to zImage @@ -2076,7 +2103,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU) + depends on (!SMP || HOTPLUG_CPU) help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -2098,7 +2125,6 @@ config ATAGS_PROC config CRASH_DUMP bool "Build kdump crash kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels which are @@ -2165,7 +2191,7 @@ config CPU_FREQ_S3C config CPU_FREQ_S3C24XX bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL + depends on ARCH_S3C24XX && CPU_FREQ select CPU_FREQ_S3C help This enables the CPUfreq driver for the Samsung S3C24XX family @@ -2177,7 +2203,7 @@ config CPU_FREQ_S3C24XX config CPU_FREQ_S3C24XX_PLL bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" - depends on CPU_FREQ_S3C24XX && EXPERIMENTAL + depends on CPU_FREQ_S3C24XX help Compile in support for changing the PLL frequency from the S3C24XX series CPUfreq driver. The PLL takes time to settle @@ -2240,7 +2266,7 @@ config FPE_NWFPE_XP config FPE_FASTFPE bool "FastFPE math emulation (EXPERIMENTAL)" - depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL + depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 ---help--- Say Y here to include the FAST floating point emulator in the kernel. This is an experimental much faster emulator which now also has full @@ -2322,3 +2348,5 @@ source "security/Kconfig" source "crypto/Kconfig" source "lib/Kconfig" + +source "arch/arm/kvm/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 661030d..acdddda 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -32,7 +32,7 @@ config FRAME_POINTER config ARM_UNWIND bool "Enable stack unwinding support (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL + depends on AEABI default y help This option enables stack unwinding support in the kernel @@ -205,12 +205,19 @@ choice Say Y here if you want kernel low-level debugging support on i.MX28. - config DEBUG_IMX31_IMX35_UART - bool "i.MX31 and i.MX35 Debug UART" - depends on SOC_IMX31 || SOC_IMX35 + config DEBUG_IMX31_UART + bool "i.MX31 Debug UART" + depends on SOC_IMX31 help Say Y here if you want kernel low-level debugging support - on i.MX31 or i.MX35. + on i.MX31. + + config DEBUG_IMX35_UART + bool "i.MX35 Debug UART" + depends on SOC_IMX35 + help + Say Y here if you want kernel low-level debugging support + on i.MX35. config DEBUG_IMX51_UART bool "i.MX51 Debug UART" @@ -219,12 +226,12 @@ choice Say Y here if you want kernel low-level debugging support on i.MX51. - config DEBUG_IMX50_IMX53_UART - bool "i.MX50 and i.MX53 Debug UART" - depends on SOC_IMX50 || SOC_IMX53 + config DEBUG_IMX53_UART + bool "i.MX53 Debug UART" + depends on SOC_IMX53 help Say Y here if you want kernel low-level debugging support - on i.MX50 or i.MX53. + on i.MX53. config DEBUG_IMX6Q_UART bool "i.MX6Q Debug UART" @@ -291,6 +298,13 @@ choice Say Y here if you want kernel low-level debugging support on MVEBU based platforms. + config DEBUG_OMAP2PLUS_UART + bool "Kernel low-level debugging messages via OMAP2PLUS UART" + depends on ARCH_OMAP2PLUS + help + Say Y here if you want kernel low-level debugging support + on OMAP2PLUS based platforms. + config DEBUG_PICOXCELL_UART depends on ARCH_PICOXCELL bool "Use PicoXcell UART for low-level debug" @@ -386,6 +400,20 @@ choice Say Y here if you want kernel low-level debugging support on Tegra based platforms. + config DEBUG_SIRFPRIMA2_UART1 + bool "Kernel low-level debugging messages via SiRFprimaII UART1" + depends on ARCH_PRIMA2 + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFprimaII devices. + + config DEBUG_SIRFMARCO_UART1 + bool "Kernel low-level debugging messages via SiRFmarco UART1" + depends on ARCH_MARCO + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFmarco devices. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -412,6 +440,13 @@ choice of the tiles using the RS1 memory map, including all new A-class core tiles, FPGA-based SMMs and software models. + config DEBUG_VT8500_UART0 + bool "Use UART0 on VIA/Wondermedia SoCs" + depends on ARCH_VT8500 + help + This option selects UART0 on VIA/Wondermedia System-on-a-chip + devices, including VT8500, WM8505, WM8650 and WM8850. + config DEBUG_LL_UART_NONE bool "No low-level debugging UART" depends on !ARCH_MULTIPLATFORM @@ -450,17 +485,70 @@ choice endchoice -config DEBUG_IMX6Q_UART_PORT - int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART - range 1 5 +config DEBUG_IMX_UART_PORT + int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ + DEBUG_IMX25_UART || \ + DEBUG_IMX21_IMX27_UART || \ + DEBUG_IMX31_UART || \ + DEBUG_IMX35_UART || \ + DEBUG_IMX51_UART || \ + DEBUG_IMX50_IMX53_UART || \ + DEBUG_IMX6Q_UART default 1 - depends on SOC_IMX6Q help Choose UART port on which kernel low-level debug messages should be output. choice prompt "Low-level debug console UART" + depends on DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP2UART1 + bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" + help + This covers at least h4, 2430sdp, 3430sdp, 3630sdp, + omap3 torpedo and 3530 lv som. + + config DEBUG_OMAP2UART2 + bool "OMAP2/3/4 UART2" + + config DEBUG_OMAP2UART3 + bool "OMAP2 UART3 (n8x0)" + + config DEBUG_OMAP3UART3 + bool "OMAP3 UART3 (most omap3 boards)" + help + This covers at least cm_t3x, beagle, crane, devkit8000, + igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, + and 3517evm. + + config DEBUG_OMAP4UART3 + bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" + + config DEBUG_OMAP3UART4 + bool "OMAP36XX UART4" + + config DEBUG_OMAP4UART4 + bool "OMAP4/5 UART4" + + config DEBUG_TI81XXUART1 + bool "TI81XX UART1 (ti8148evm)" + + config DEBUG_TI81XXUART2 + bool "TI81XX UART2" + + config DEBUG_TI81XXUART3 + bool "TI81XX UART3 (ti8168evm)" + + config DEBUG_AM33XXUART1 + bool "AM33XX UART1" + + config DEBUG_ZOOM_UART + bool "Zoom2/3 UART" +endchoice + +choice + prompt "Low-level debug console UART" depends on DEBUG_LL && DEBUG_TEGRA_UART config TEGRA_DEBUG_UART_AUTO_ODMDATA @@ -495,17 +583,20 @@ config DEBUG_LL_INCLUDE default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ DEBUG_IMX21_IMX27_UART || \ - DEBUG_IMX31_IMX35_UART || \ + DEBUG_IMX31_UART || \ + DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ - DEBUG_IMX50_IMX53_UART ||\ + DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART + default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 + default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30c443c..ee4605f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_PRIMA2) += prima2 machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_RPC) += rpc -machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2412 s3c2440 +machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0 machine-$(CONFIG_ARCH_S5PC100) += s5pc100 @@ -194,6 +194,7 @@ machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx machine-$(CONFIG_MACH_SPEAR600) += spear6xx +machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_ARCH_SUNXI) += sunxi @@ -204,7 +205,7 @@ plat-$(CONFIG_ARCH_S3C64XX) += samsung plat-$(CONFIG_PLAT_IOP) += iop plat-$(CONFIG_PLAT_ORION) += orion plat-$(CONFIG_PLAT_PXA) += pxa -plat-$(CONFIG_PLAT_S3C24XX) += s3c24xx samsung +plat-$(CONFIG_PLAT_S3C24XX) += samsung plat-$(CONFIG_PLAT_S5P) += samsung plat-$(CONFIG_PLAT_SPEAR) += spear plat-$(CONFIG_PLAT_VERSATILE) += versatile @@ -252,6 +253,7 @@ core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ core-$(CONFIG_XEN) += arch/arm/xen/ +core-$(CONFIG_KVM_ARM_HOST) += arch/arm/kvm/ # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index 9deb56a..24b0475 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -13,8 +13,6 @@ extern void error(char *); #define STATIC static #define STATIC_RW_DATA /* non-static please */ -#define ARCH_HAS_DECOMP_WDOG - /* Diagnostic functions */ #ifdef DEBUG # define Assert(cond,msg) {if(!(cond)) error(msg);} diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5ebb44f..411ab16 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb \ kirkwood-openblocks_a6.dtb +dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ @@ -95,11 +96,13 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ imx28-cfa10036.dtb \ + imx28-cfa10037.dtb \ imx28-cfa10049.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-tx28.dtb +dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-beagle.dtb \ omap3-beagle-xm.dtb \ @@ -124,6 +127,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ sh73a0-kzm9g.dtb \ sh7372-mackerel.dtb +dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ + socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ @@ -132,8 +137,10 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ + sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ + tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ tegra20-plutux.dtb \ @@ -142,8 +149,11 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-trimslice.dtb \ tegra20-ventana.dtb \ tegra20-whistler.dtb \ + tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ - tegra30-cardhu-a04.dtb + tegra30-cardhu-a04.dtb \ + tegra114-dalmore.dtb \ + tegra114-pluto.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ @@ -151,7 +161,8 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ xenvm-4.2.dtb dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ - wm8650-mid.dtb + wm8650-mid.dtb \ + wm8850-w70v2.dtb dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb targets += dtbs diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 74d92cd..5160210 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -78,6 +78,10 @@ bus-width = <4>; }; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 4c0abe8..5b29225 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -131,6 +131,12 @@ clocks = <&coreclk 0>; status = "disabled"; }; + + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0xd0010300 0x20>; + interrupts = <50>; + }; }; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 222047f..b0268a5 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -29,6 +29,9 @@ gpio3 = &pioD; tcb0 = &tcb0; tcb1 = &tcb1; + ssc0 = &ssc0; + ssc1 = &ssc1; + ssc2 = &ssc2; }; cpus { cpu@0 { @@ -88,6 +91,52 @@ interrupts = <20 4 0 21 4 0 22 4 0>; }; + mmc0: mmc@fffb4000 { + compatible = "atmel,hsmci"; + reg = <0xfffb4000 0x4000>; + interrupts = <10 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssc0: ssc@fffd0000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffd0000 0x4000>; + interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disable"; + }; + + ssc1: ssc@fffd4000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffd4000 0x4000>; + interrupts = <15 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + status = "disable"; + }; + + ssc2: ssc@fffd8000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffd8000 0x4000>; + interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; + status = "disable"; + }; + + macb0: ethernet@fffbc000 { + compatible = "cdns,at91rm9200-emac", "cdns,emac"; + reg = <0xfffbc000 0x4000>; + interrupts = <24 4 3>; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; + status = "disabled"; + }; + pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; @@ -207,6 +256,115 @@ }; }; + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 7 0x1 0x0 /* PA7 periph A */ + 0 8 0x1 0x0 /* PA8 periph A */ + 0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x0 /* PA10 periph A */ + 0 11 0x1 0x0 /* PA11 periph A */ + 0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0>; /* PA16 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <1 12 0x2 0x0 /* PB12 periph B */ + 1 13 0x2 0x0 /* PB13 periph B */ + 1 14 0x2 0x0 /* PB14 periph B */ + 1 15 0x2 0x0 /* PB15 periph B */ + 1 16 0x2 0x0 /* PB16 periph B */ + 1 17 0x2 0x0 /* PB17 periph B */ + 1 18 0x2 0x0 /* PB18 periph B */ + 1 19 0x2 0x0>; /* PB19 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 27 0x1 0x0>; /* PA27 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 28 0x1 0x1 /* PA28 periph A with pullup */ + 0 29 0x1 0x1>; /* PA29 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <1 3 0x2 0x1 /* PB3 periph B with pullup */ + 1 4 0x2 0x1 /* PB4 periph B with pullup */ + 1 5 0x2 0x1>; /* PB5 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 8 0x2 0x1 /* PA8 periph B with pullup */ + 0 9 0x2 0x1>; /* PA9 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 10 0x2 0x1 /* PA10 periph B with pullup */ + 0 11 0x2 0x1 /* PA11 periph B with pullup */ + 0 12 0x2 0x1>; /* PA12 periph B with pullup */ + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A */ + 1 1 0x1 0x0 /* PB1 periph A */ + 1 2 0x1 0x0>; /* PB2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 3 0x1 0x0 /* PB3 periph A */ + 1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 8 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0 /* PB10 periph A */ + 1 11 0x1 0x0>; /* PB11 periph A */ + }; + }; + + ssc2 { + pinctrl_ssc2_tx: ssc2_tx-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0 /* PB13 periph A */ + 1 14 0x1 0x0>; /* PB14 periph A */ + }; + + pinctrl_ssc2_rx: ssc2_rx-0 { + atmel,pins = + <1 15 0x1 0x0 /* PB15 periph A */ + 1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0>; /* PB17 periph A */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 8aa4893..e586d85 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -44,6 +44,11 @@ status = "okay"; }; + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + usb1: gadget@fffb0000 { atmel,vbus-gpio = <&pioD 4 0>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 80e29c6..7750f98 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -324,8 +324,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; interrupts = <5 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -335,8 +333,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; interrupts = <6 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -346,8 +342,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; interrupts = <7 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -357,8 +351,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; interrupts = <8 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; @@ -390,8 +382,9 @@ reg = < 0x40000000 0x10000000 0xffffe000 0x00000600 0xffffe600 0x00000200 - 0x00100000 0x00100000 + 0x00108000 0x00018000 >; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 0376bf4..d400f8d 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -71,7 +71,10 @@ nand0: nand@40000000 { nand-bus-width = <8>; - nand-ecc-mode = "soft"; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <2>; + atmel,pmecc-sector-size = <512>; nand-on-flash-bbt; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 8ecca69..aa98e64 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -197,9 +197,9 @@ }; usart3 { - pinctrl_uart3: usart3-0 { + pinctrl_usart3: usart3-0 { atmel,pins = - <2 23 0x2 0x1 /* PC22 periph B with pullup */ + <2 22 0x2 0x1 /* PC22 periph B with pullup */ 2 23 0x2 0x0>; /* PC23 periph B */ }; @@ -402,8 +402,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; interrupts = <5 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; @@ -413,8 +411,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; interrupts = <6 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; @@ -424,8 +420,6 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; interrupts = <7 4 5>; - atmel,use-dma-rx; - atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; @@ -518,7 +512,11 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x40000000 0x10000000 + 0xffffe000 0x600 /* PMECC Registers */ + 0xffffe600 0x200 /* PMECC Error Location Registers */ + 0x00108000 0x18000 /* PMECC looup table in ROM code */ >; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 31e7be2..4027ac7 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -26,7 +26,10 @@ ahb { nand0: nand@40000000 { nand-bus-width = <8>; - nand-ecc-mode = "soft"; + nand-ecc-mode = "hw"; + atmel,has-pmecc; /* Enable PMECC */ + atmel,pmecc-cap = <2>; + atmel,pmecc-sector-size = <512>; nand-on-flash-bbt; status = "okay"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 9b72054..aafda17 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,5 +1,4 @@ /dts-v1/; -/memreserve/ 0x0c000000 0x04000000; /include/ "bcm2835.dtsi" / { @@ -25,3 +24,18 @@ brcm,function = <7>; /* alt3 */ }; }; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; +}; + +&sdhci { + status = "okay"; + bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 8917550..4bf2a87 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -63,5 +63,49 @@ interrupt-controller; #interrupt-cells = <2>; }; + + i2c0: i2c@20205000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e205000 0x1000>; + interrupts = <2 21>; + clocks = <&clk_i2c>; + status = "disabled"; + }; + + i2c1: i2c@20804000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e804000 0x1000>; + interrupts = <2 21>; + clocks = <&clk_i2c>; + status = "disabled"; + }; + + sdhci: sdhci { + compatible = "brcm,bcm2835-sdhci"; + reg = <0x7e300000 0x100>; + interrupts = <2 30>; + clocks = <&clk_mmc>; + status = "disabled"; + }; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk_mmc: mmc { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + clk_i2c: i2c { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <150000000>; + }; }; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 37dc5a3..f712fb6 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -15,6 +15,9 @@ model = "DA850/AM1808/OMAP-L138 EVM"; soc { + pmx_core: pinmux@1c14120 { + status = "okay"; + }; serial0: serial@1c42000 { status = "okay"; }; @@ -24,5 +27,22 @@ serial2: serial@1d0d000 { status = "okay"; }; + rtc0: rtc@1c23000 { + status = "okay"; + }; + i2c0: i2c@1c22000 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + }; + wdt: wdt@1c21000 { + status = "okay"; + }; + }; + nand_cs3@62000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_cs3_pins>; }; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 640ab75..3ec1bda 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -28,14 +28,47 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x01c00000 0x400000>; + interrupt-parent = <&intc>; + pmx_core: pinmux@1c14120 { + compatible = "pinctrl-single"; + reg = <0x14120 0x50>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + status = "disabled"; + + nand_cs3_pins: pinmux_nand_pins { + pinctrl-single,bits = < + /* EMA_OE, EMA_WE */ + 0x1c 0x00110000 0x00ff0000 + /* EMA_CS[4],EMA_CS[3]*/ + 0x1c 0x00000110 0x00000ff0 + /* + * EMA_D[0], EMA_D[1], EMA_D[2], + * EMA_D[3], EMA_D[4], EMA_D[5], + * EMA_D[6], EMA_D[7] + */ + 0x24 0x11111111 0xffffffff + /* EMA_A[1], EMA_A[2] */ + 0x30 0x01100000 0x0ff00000 + >; + }; + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,bits = < + /* I2C0_SDA,I2C0_SCL */ + 0x10 0x00002200 0x0000ff00 + >; + }; + }; serial0: serial@1c42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; clock-frequency = <150000000>; reg-shift = <2>; interrupts = <25>; - interrupt-parent = <&intc>; status = "disabled"; }; serial1: serial@1d0c000 { @@ -44,7 +77,6 @@ clock-frequency = <150000000>; reg-shift = <2>; interrupts = <53>; - interrupt-parent = <&intc>; status = "disabled"; }; serial2: serial@1d0d000 { @@ -53,8 +85,40 @@ clock-frequency = <150000000>; reg-shift = <2>; interrupts = <61>; - interrupt-parent = <&intc>; status = "disabled"; }; + rtc0: rtc@1c23000 { + compatible = "ti,da830-rtc"; + reg = <0x23000 0x1000>; + interrupts = <19 + 19>; + status = "disabled"; + }; + i2c0: i2c@1c22000 { + compatible = "ti,davinci-i2c"; + reg = <0x22000 0x1000>; + interrupts = <15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + wdt: wdt@1c21000 { + compatible = "ti,davinci-wdt"; + reg = <0x21000 0x1000>; + status = "disabled"; + }; + }; + nand_cs3@62000000 { + compatible = "ti,davinci-nand"; + reg = <0x62000000 0x807ff + 0x68000000 0x8000>; + ti,davinci-chipselect = <1>; + ti,davinci-mask-ale = <0>; + ti,davinci-mask-cle = <0>; + ti,davinci-mask-chipsel = <0>; + ti,davinci-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + ti,davinci-nand-use-bbt; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 63f2fbc..69140ba 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -170,10 +170,9 @@ gpio-bank = <8>; }; - pinctrl@80157000 { - // This is actually the PRCMU base address - reg = <0x80157000 0x2000>; - compatible = "stericsson,nmk_pinctrl"; + pinctrl { + compatible = "stericsson,nmk-pinctrl"; + prcm = <&prcmu>; }; usb@a03e0000 { @@ -190,9 +189,10 @@ interrupts = <0 25 0x4>; }; - prcmu@80157000 { + prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; reg = <0x80157000 0x1000>; + reg-names = "prcmu"; interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 42eac1f..740630f 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -93,6 +93,7 @@ reg = <0xd0400 0x20>; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <12>, <13>, <14>, <60>; }; @@ -103,6 +104,7 @@ reg = <0xd0420 0x20>; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <61>; }; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 297e3ba..b9b3241 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -21,6 +21,6 @@ }; chosen { - bootargs = "console=ttyS1,115200n81"; + bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"; }; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index eb504a6..c8a8c08 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -15,11 +15,18 @@ interrupt-parent = <&gic>; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a9"; + reg = <0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a9"; + reg = <1>; }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index e31bfc4..2feffc7 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -48,13 +48,13 @@ }; pinctrl_0: pinctrl@11400000 { - compatible = "samsung,pinctrl-exynos4210"; + compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; }; pinctrl_1: pinctrl@11000000 { - compatible = "samsung,pinctrl-exynos4210"; + compatible = "samsung,exynos4210-pinctrl"; reg = <0x11000000 0x1000>; interrupts = <0 46 0>; @@ -66,7 +66,7 @@ }; pinctrl_2: pinctrl@03860000 { - compatible = "samsung,pinctrl-exynos4210"; + compatible = "samsung,exynos4210-pinctrl"; reg = <0x03860000 0x1000>; }; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 8e6115a..099cec7 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -661,7 +661,7 @@ sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <3>; + samsung,pin-function = <4>; samsung,pin-pud = <4>; samsung,pin-drv = <3>; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 179a62e..9a87806 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -37,13 +37,13 @@ }; pinctrl_0: pinctrl@11400000 { - compatible = "samsung,pinctrl-exynos4x12"; + compatible = "samsung,exynos4x12-pinctrl"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; }; pinctrl_1: pinctrl@11000000 { - compatible = "samsung,pinctrl-exynos4x12"; + compatible = "samsung,exynos4x12-pinctrl"; reg = <0x11000000 0x1000>; interrupts = <0 46 0>; @@ -55,14 +55,14 @@ }; pinctrl_2: pinctrl@03860000 { - compatible = "samsung,pinctrl-exynos4x12"; + compatible = "samsung,exynos4x12-pinctrl"; reg = <0x03860000 0x1000>; interrupt-parent = <&combiner>; interrupts = <10 0>; }; pinctrl_3: pinctrl@106E0000 { - compatible = "samsung,pinctrl-exynos4x12"; + compatible = "samsung,exynos4x12-pinctrl"; reg = <0x106E0000 0x1000>; interrupts = <0 72 0>; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index e05b18f..1b8d410 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -49,6 +49,11 @@ compatible = "samsung,s524ad0xd1"; reg = <0x51>; }; + + wm8994: wm8994@1a { + compatible = "wlf,wm8994"; + reg = <0x1a>; + }; }; i2c@121D0000 { @@ -146,6 +151,7 @@ reg = <0>; bus-width = <4>; samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; + disable-wp; gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>, @@ -204,4 +210,25 @@ samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>; }; + + i2s0: i2s@03830000 { + gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>, + <&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>, + <&gpz 6 2 0 0>; + }; + + i2s1: i2s@12D60000 { + status = "disabled"; + }; + + i2s2: i2s@12D70000 { + status = "disabled"; + }; + + sound { + compatible = "samsung,smdk-wm8994"; + + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&wm8994>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 3acf594..b1ac73e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -211,8 +211,9 @@ compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; interrupts = <0 66 0>; - tx-dma-channel = <&pdma0 5>; /* preliminary */ - rx-dma-channel = <&pdma0 4>; /* preliminary */ + dmas = <&pdma0 5 + &pdma0 4>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; }; @@ -221,8 +222,9 @@ compatible = "samsung,exynos4210-spi"; reg = <0x12d30000 0x100>; interrupts = <0 67 0>; - tx-dma-channel = <&pdma1 5>; /* preliminary */ - rx-dma-channel = <&pdma1 4>; /* preliminary */ + dmas = <&pdma1 5 + &pdma1 4>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; }; @@ -231,8 +233,9 @@ compatible = "samsung,exynos4210-spi"; reg = <0x12d40000 0x100>; interrupts = <0 68 0>; - tx-dma-channel = <&pdma0 7>; /* preliminary */ - rx-dma-channel = <&pdma0 6>; /* preliminary */ + dmas = <&pdma0 7 + &pdma0 6>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; }; @@ -269,6 +272,35 @@ #size-cells = <0>; }; + i2s0: i2s@03830000 { + compatible = "samsung,i2s-v5"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10 + &pdma0 9 + &pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + samsung,supports-6ch; + samsung,supports-rstclr; + samsung,supports-secdai; + samsung,idma-addr = <0x03000000>; + }; + + i2s1: i2s@12D60000 { + compatible = "samsung,i2s-v5"; + reg = <0x12D60000 0x100>; + dmas = <&pdma1 12 + &pdma1 11>; + dma-names = "tx", "rx"; + }; + + i2s2: i2s@12D70000 { + compatible = "samsung,i2s-v5"; + reg = <0x12D70000 0x100>; + dmas = <&pdma0 12 + &pdma0 11>; + dma-names = "tx", "rx"; + }; + amba { #address-cells = <1>; #size-cells = <1>; @@ -280,24 +312,36 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; interrupts = <0 34 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; interrupts = <0 35 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; mdma0: mdma@10800000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; interrupts = <0 33 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; mdma1: mdma@11C10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; interrupts = <0 124 0>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 024269d..5f3562a 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -86,7 +86,7 @@ }; pinctrl { - compatible = "samsung,pinctrl-exynos5440"; + compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; interrupt-controller; #interrupt-cells = <2>; @@ -154,6 +154,6 @@ rtc { compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; - interrupts = <0 16 0>, <0 17 0>; + interrupts = <0 17 0>, <0 16 0>; }; }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 5927a8d..6aad34a 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -37,6 +37,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; cpu@901 { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 65415c5..56afcf4 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -391,7 +391,9 @@ }; lradc@80050000 { + compatible = "fsl,imx23-lradc"; reg = <0x80050000 0x2000>; + interrupts = <36 37 38 39 40 41 42 43 44>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts new file mode 100644 index 0000000..c2ef3a3 --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -0,0 +1,77 @@ +/* + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10049 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10037 Board"; + compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10037>; + + hog_pins_cfa10037: hog-10037@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index bdc80a4..a0d3e9f 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -23,69 +23,120 @@ apbh@80000000 { pinctrl@80018000 { pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10049>; + pinctrl-1 = <&hog_pins_cfa10049 + &hog_pins_cfa10049_pullup>; hog_pins_cfa10049: hog-10049@0 { reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + 0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - spi3_pins_cfa10049: spi3-cfa10049@0 { + hog_pins_cfa10049_pullup: hog-10049-pullup@0 { reg = <0>; fsl,pinmux-ids = < - 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */ - 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ - 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */ - 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */ - 0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */ + 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ + 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ + 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ + 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ >; - fsl,drive-strength = <1>; + fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <1>; }; - }; - ssp3: ssp@80016000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi3_pins_cfa10049>; - status = "okay"; + spi2_pins_cfa10049: spi2-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ + 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ + 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; - gpio5: gpio5@0 { - compatible = "fairchild,74hc595"; - gpio-controller; - #gpio-cells = <2>; + spi3_pins_cfa10049: spi3-cfa10049@0 { reg = <0>; - registers-number = <2>; - spi-max-frequency = <100000>; + fsl,pinmux-ids = < + 0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */ + 0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */ + 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ + 0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */ + 0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; }; - gpio6: gpio6@1 { - compatible = "fairchild,74hc595"; - gpio-controller; - #gpio-cells = <2>; - reg = <1>; - registers-number = <4>; - spi-max-frequency = <100000>; + lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; }; - dac0: dh2228@2 { - compatible = "rohm,dh2228fv"; - reg = <2>; - spi-max-frequency = <100000>; + lcdif_pins_cfa10049: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; }; }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10049 + &lcdif_pins_cfa10049>; + status = "okay"; + }; }; apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&pwm3_pins_b>; + status = "okay"; + }; + i2c1: i2c@8005a000 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; @@ -113,6 +164,19 @@ i2c@3 { reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: pca9555@20 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio2>; + interrupts = <19 0x2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20>; + }; }; }; @@ -153,4 +217,92 @@ status = "okay"; }; }; + + spi2 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_cfa10049>; + status = "okay"; + gpio-sck = <&gpio2 16 0>; + gpio-mosi = <&gpio2 17 0>; + gpio-miso = <&gpio2 18 0>; + cs-gpios = <&gpio3 23 0>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + hx8357: hx8357@0 { + compatible = "himax,hx8357b", "himax,hx8357"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + gpios-reset = <&gpio3 30 0>; + im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>; + }; + }; + + spi3 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_cfa10049>; + status = "okay"; + gpio-sck = <&gpio0 24 0>; + gpio-mosi = <&gpio0 28 0>; + cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>; + num-chipselects = <3>; + #address-cells = <1>; + #size-cells = <0>; + + gpio5: gpio5@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + registers-number = <2>; + spi-max-frequency = <100000>; + }; + + gpio6: gpio6@1 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <1>; + registers-number = <4>; + spi-max-frequency = <100000>; + }; + + dac0: dh2228@2 { + compatible = "rohm,dh2228fv"; + reg = <2>; + spi-max-frequency = <100000>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rotary_button { + label = "rotary_button"; + gpios = <&gpio3 26 1>; + debounce-interval = <10>; + linux,code = <28>; + }; + }; + + rotary { + compatible = "rotary-encoder"; + gpios = <&gpio3 24 1>, <&gpio3 25 1>; + linux,axis = <1>; /* REL_Y */ + rotary-encoder,relative-axis; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 3bab6b0..6ce3d17 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -177,6 +177,7 @@ lradc@80050000 { status = "okay"; + fsl,lradc-touchscreen-wires = <4>; }; duart: serial@80074000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 13b7053..7ba4966 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -502,6 +502,16 @@ fsl,pull-up = <0>; }; + pwm3_pins_b: pwm3@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + pwm4_pins_a: pwm4@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index eef7099..454c2d1 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -45,6 +45,8 @@ compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43f90000 0x4000>; interrupts = <45>; + clocks = <&clks 10>, <&clks 30>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -52,12 +54,16 @@ compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43f94000 0x4000>; interrupts = <32>; + clocks = <&clks 10>, <&clks 31>; + clock-names = "ipg", "per"; status = "disabled"; }; uart4: serial@43fb0000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43fb0000 0x4000>; + clocks = <&clks 10>, <&clks 49>; + clock-names = "ipg", "per"; interrupts = <46>; status = "disabled"; }; @@ -66,6 +72,8 @@ compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43fb4000 0x4000>; interrupts = <47>; + clocks = <&clks 10>, <&clks 50>; + clock-names = "ipg", "per"; status = "disabled"; }; }; @@ -81,8 +89,17 @@ compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; interrupts = <18>; + clocks = <&clks 10>, <&clks 48>; + clock-names = "ipg", "per"; status = "disabled"; }; + + clks: ccm@53f80000{ + compatible = "fsl,imx31-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <0 31 0x04 0 53 0x04>; + #clock-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index d6265ca..ff1205e 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -866,7 +866,7 @@ compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; - clocks = <&clks 117>, <&clks 117>, <&clks 177>; + clocks = <&clks 117>, <&clks 117>, <&clks 190>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/marco-evb.dts b/arch/arm/boot/dts/marco-evb.dts new file mode 100644 index 0000000..5130aea --- /dev/null +++ b/arch/arm/boot/dts/marco-evb.dts @@ -0,0 +1,54 @@ +/* + * DTS file for CSR SiRFmarco Evaluation Board + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "marco.dtsi" + +/ { + model = "CSR SiRFmarco Evaluation Board"; + compatible = "sirf,marco-cb", "sirf,marco"; + + memory { + reg = <0x40000000 0x60000000>; + }; + + axi { + peri-iobg { + uart1: uart@cc060000 { + status = "okay"; + }; + uart2: uart@cc070000 { + status = "okay"; + }; + i2c0: i2c@cc0e0000 { + status = "okay"; + fpga-cpld@4d { + compatible = "sirf,fpga-cpld"; + reg = <0x4d>; + }; + }; + spi1: spi@cc170000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + pci-iobg { + sd0: sdhci@cd000000 { + bus-width = <8>; + status = "okay"; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi new file mode 100644 index 0000000..1579c34 --- /dev/null +++ b/arch/arm/boot/dts/marco.dtsi @@ -0,0 +1,756 @@ +/* + * DTS file for CSR SiRFmarco SoC + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" +/ { + compatible = "sirf,marco"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x40000000 0x40000000 0xa0000000>; + + l2-cache-controller@c0030000 { + compatible = "sirf,marco-pl310-cache", "arm,pl310-cache"; + reg = <0xc0030000 0x1000>; + interrupts = <0 59 0>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1>; + arm,filter-ranges = <0x40000000 0x80000000>; + }; + + gic: interrupt-controller@c0011000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xc0011000 0x1000>, + <0xc0010100 0x0100>; + }; + + rstc-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc2000000 0xc2000000 0x1000000>; + + reset-controller@c2000000 { + compatible = "sirf,marco-rstc"; + reg = <0xc2000000 0x10000>; + }; + }; + + sys-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc3000000 0xc3000000 0x1000000>; + + clock-controller@c3000000 { + compatible = "sirf,marco-clkc"; + reg = <0xc3000000 0x1000>; + interrupts = <0 3 0>; + }; + + rsc-controller@c3010000 { + compatible = "sirf,marco-rsc"; + reg = <0xc3010000 0x1000>; + }; + }; + + mem-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc4000000 0xc4000000 0x1000000>; + + memory-controller@c4000000 { + compatible = "sirf,marco-memc"; + reg = <0xc4000000 0x10000>; + interrupts = <0 27 0>; + }; + }; + + disp-iobg0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc5000000 0xc5000000 0x1000000>; + + display0@c5000000 { + compatible = "sirf,marco-lcd"; + reg = <0xc5000000 0x10000>; + interrupts = <0 30 0>; + }; + + vpp0@c5010000 { + compatible = "sirf,marco-vpp"; + reg = <0xc5010000 0x10000>; + interrupts = <0 31 0>; + }; + }; + + disp-iobg1 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc6000000 0xc6000000 0x1000000>; + + display1@c6000000 { + compatible = "sirf,marco-lcd"; + reg = <0xc6000000 0x10000>; + interrupts = <0 62 0>; + }; + + vpp1@c6010000 { + compatible = "sirf,marco-vpp"; + reg = <0xc6010000 0x10000>; + interrupts = <0 63 0>; + }; + }; + + graphics-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc8000000 0xc8000000 0x1000000>; + + graphics@c8000000 { + compatible = "powervr,sgx540"; + reg = <0xc8000000 0x1000000>; + interrupts = <0 6 0>; + }; + }; + + multimedia-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc9000000 0xc9000000 0x1000000>; + + multimedia@a0000000 { + compatible = "sirf,marco-video-codec"; + reg = <0xc9000000 0x1000000>; + interrupts = <0 5 0>; + }; + }; + + dsp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xca000000 0xca000000 0x2000000>; + + dspif@ca000000 { + compatible = "sirf,marco-dspif"; + reg = <0xca000000 0x10000>; + interrupts = <0 9 0>; + }; + + gps@ca010000 { + compatible = "sirf,marco-gps"; + reg = <0xca010000 0x10000>; + interrupts = <0 7 0>; + }; + + dsp@cb000000 { + compatible = "sirf,marco-dsp"; + reg = <0xcb000000 0x1000000>; + interrupts = <0 8 0>; + }; + }; + + peri-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xcc000000 0xcc000000 0x2000000>; + + timer@cc020000 { + compatible = "sirf,marco-tick"; + reg = <0xcc020000 0x1000>; + interrupts = <0 0 0>, + <0 1 0>, + <0 2 0>, + <0 49 0>, + <0 50 0>, + <0 51 0>; + }; + + nand@cc030000 { + compatible = "sirf,marco-nand"; + reg = <0xcc030000 0x10000>; + interrupts = <0 41 0>; + }; + + audio@cc040000 { + compatible = "sirf,marco-audio"; + reg = <0xcc040000 0x10000>; + interrupts = <0 35 0>; + }; + + uart0: uart@cc050000 { + cell-index = <0>; + compatible = "sirf,marco-uart"; + reg = <0xcc050000 0x1000>; + interrupts = <0 17 0>; + fifosize = <128>; + status = "disabled"; + }; + + uart1: uart@cc060000 { + cell-index = <1>; + compatible = "sirf,marco-uart"; + reg = <0xcc060000 0x1000>; + interrupts = <0 18 0>; + fifosize = <32>; + status = "disabled"; + }; + + uart2: uart@cc070000 { + cell-index = <2>; + compatible = "sirf,marco-uart"; + reg = <0xcc070000 0x1000>; + interrupts = <0 19 0>; + fifosize = <128>; + status = "disabled"; + }; + + uart3: uart@cc190000 { + cell-index = <3>; + compatible = "sirf,marco-uart"; + reg = <0xcc190000 0x1000>; + interrupts = <0 66 0>; + fifosize = <128>; + status = "disabled"; + }; + + uart4: uart@cc1a0000 { + cell-index = <4>; + compatible = "sirf,marco-uart"; + reg = <0xcc1a0000 0x1000>; + interrupts = <0 69 0>; + fifosize = <128>; + status = "disabled"; + }; + + usp0: usp@cc080000 { + cell-index = <0>; + compatible = "sirf,marco-usp"; + reg = <0xcc080000 0x10000>; + interrupts = <0 20 0>; + status = "disabled"; + }; + + usp1: usp@cc090000 { + cell-index = <1>; + compatible = "sirf,marco-usp"; + reg = <0xcc090000 0x10000>; + interrupts = <0 21 0>; + status = "disabled"; + }; + + usp2: usp@cc0a0000 { + cell-index = <2>; + compatible = "sirf,marco-usp"; + reg = <0xcc0a0000 0x10000>; + interrupts = <0 22 0>; + status = "disabled"; + }; + + dmac0: dma-controller@cc0b0000 { + cell-index = <0>; + compatible = "sirf,marco-dmac"; + reg = <0xcc0b0000 0x10000>; + interrupts = <0 12 0>; + }; + + dmac1: dma-controller@cc160000 { + cell-index = <1>; + compatible = "sirf,marco-dmac"; + reg = <0xcc160000 0x10000>; + interrupts = <0 13 0>; + }; + + vip@cc0c0000 { + compatible = "sirf,marco-vip"; + reg = <0xcc0c0000 0x10000>; + }; + + spi0: spi@cc0d0000 { + cell-index = <0>; + compatible = "sirf,marco-spi"; + reg = <0xcc0d0000 0x10000>; + interrupts = <0 15 0>; + sirf,spi-num-chipselects = <1>; + cs-gpios = <&gpio 0 0>; + sirf,spi-dma-rx-channel = <25>; + sirf,spi-dma-tx-channel = <20>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@cc170000 { + cell-index = <1>; + compatible = "sirf,marco-spi"; + reg = <0xcc170000 0x10000>; + interrupts = <0 16 0>; + sirf,spi-num-chipselects = <1>; + cs-gpios = <&gpio 0 0>; + sirf,spi-dma-rx-channel = <12>; + sirf,spi-dma-tx-channel = <13>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@cc0e0000 { + cell-index = <0>; + compatible = "sirf,marco-i2c"; + reg = <0xcc0e0000 0x10000>; + interrupts = <0 24 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@cc0f0000 { + cell-index = <1>; + compatible = "sirf,marco-i2c"; + reg = <0xcc0f0000 0x10000>; + interrupts = <0 25 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + tsc@cc110000 { + compatible = "sirf,marco-tsc"; + reg = <0xcc110000 0x10000>; + interrupts = <0 33 0>; + }; + + gpio: pinctrl@cc120000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,marco-pinctrl"; + reg = <0xcc120000 0x10000>; + interrupts = <0 43 0>, + <0 44 0>, + <0 45 0>, + <0 46 0>, + <0 47 0>; + gpio-controller; + interrupt-controller; + + lcd_16pins_a: lcd0_0 { + lcd { + sirf,pins = "lcd_16bitsgrp"; + sirf,function = "lcd_16bits"; + }; + }; + lcd_18pins_a: lcd0_1 { + lcd { + sirf,pins = "lcd_18bitsgrp"; + sirf,function = "lcd_18bits"; + }; + }; + lcd_24pins_a: lcd0_2 { + lcd { + sirf,pins = "lcd_24bitsgrp"; + sirf,function = "lcd_24bits"; + }; + }; + lcdrom_pins_a: lcdrom0_0 { + lcd { + sirf,pins = "lcdromgrp"; + sirf,function = "lcdrom"; + }; + }; + uart0_pins_a: uart0_0 { + uart { + sirf,pins = "uart0grp"; + sirf,function = "uart0"; + }; + }; + uart1_pins_a: uart1_0 { + uart { + sirf,pins = "uart1grp"; + sirf,function = "uart1"; + }; + }; + uart2_pins_a: uart2_0 { + uart { + sirf,pins = "uart2grp"; + sirf,function = "uart2"; + }; + }; + uart2_noflow_pins_a: uart2_1 { + uart { + sirf,pins = "uart2_nostreamctrlgrp"; + sirf,function = "uart2_nostreamctrl"; + }; + }; + spi0_pins_a: spi0_0 { + spi { + sirf,pins = "spi0grp"; + sirf,function = "spi0"; + }; + }; + spi1_pins_a: spi1_0 { + spi { + sirf,pins = "spi1grp"; + sirf,function = "spi1"; + }; + }; + i2c0_pins_a: i2c0_0 { + i2c { + sirf,pins = "i2c0grp"; + sirf,function = "i2c0"; + }; + }; + i2c1_pins_a: i2c1_0 { + i2c { + sirf,pins = "i2c1grp"; + sirf,function = "i2c1"; + }; + }; + pwm0_pins_a: pwm0_0 { + pwm { + sirf,pins = "pwm0grp"; + sirf,function = "pwm0"; + }; + }; + pwm1_pins_a: pwm1_0 { + pwm { + sirf,pins = "pwm1grp"; + sirf,function = "pwm1"; + }; + }; + pwm2_pins_a: pwm2_0 { + pwm { + sirf,pins = "pwm2grp"; + sirf,function = "pwm2"; + }; + }; + pwm3_pins_a: pwm3_0 { + pwm { + sirf,pins = "pwm3grp"; + sirf,function = "pwm3"; + }; + }; + gps_pins_a: gps_0 { + gps { + sirf,pins = "gpsgrp"; + sirf,function = "gps"; + }; + }; + vip_pins_a: vip_0 { + vip { + sirf,pins = "vipgrp"; + sirf,function = "vip"; + }; + }; + sdmmc0_pins_a: sdmmc0_0 { + sdmmc0 { + sirf,pins = "sdmmc0grp"; + sirf,function = "sdmmc0"; + }; + }; + sdmmc1_pins_a: sdmmc1_0 { + sdmmc1 { + sirf,pins = "sdmmc1grp"; + sirf,function = "sdmmc1"; + }; + }; + sdmmc2_pins_a: sdmmc2_0 { + sdmmc2 { + sirf,pins = "sdmmc2grp"; + sirf,function = "sdmmc2"; + }; + }; + sdmmc3_pins_a: sdmmc3_0 { + sdmmc3 { + sirf,pins = "sdmmc3grp"; + sirf,function = "sdmmc3"; + }; + }; + sdmmc4_pins_a: sdmmc4_0 { + sdmmc4 { + sirf,pins = "sdmmc4grp"; + sirf,function = "sdmmc4"; + }; + }; + sdmmc5_pins_a: sdmmc5_0 { + sdmmc5 { + sirf,pins = "sdmmc5grp"; + sirf,function = "sdmmc5"; + }; + }; + i2s_pins_a: i2s_0 { + i2s { + sirf,pins = "i2sgrp"; + sirf,function = "i2s"; + }; + }; + ac97_pins_a: ac97_0 { + ac97 { + sirf,pins = "ac97grp"; + sirf,function = "ac97"; + }; + }; + nand_pins_a: nand_0 { + nand { + sirf,pins = "nandgrp"; + sirf,function = "nand"; + }; + }; + usp0_pins_a: usp0_0 { + usp0 { + sirf,pins = "usp0grp"; + sirf,function = "usp0"; + }; + }; + usp1_pins_a: usp1_0 { + usp1 { + sirf,pins = "usp1grp"; + sirf,function = "usp1"; + }; + }; + usp2_pins_a: usp2_0 { + usp2 { + sirf,pins = "usp2grp"; + sirf,function = "usp2"; + }; + }; + usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus_0 { + usb0_utmi_drvbus { + sirf,pins = "usb0_utmi_drvbusgrp"; + sirf,function = "usb0_utmi_drvbus"; + }; + }; + usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus_0 { + usb1_utmi_drvbus { + sirf,pins = "usb1_utmi_drvbusgrp"; + sirf,function = "usb1_utmi_drvbus"; + }; + }; + warm_rst_pins_a: warm_rst_0 { + warm_rst { + sirf,pins = "warm_rstgrp"; + sirf,function = "warm_rst"; + }; + }; + pulse_count_pins_a: pulse_count_0 { + pulse_count { + sirf,pins = "pulse_countgrp"; + sirf,function = "pulse_count"; + }; + }; + cko0_rst_pins_a: cko0_rst_0 { + cko0_rst { + sirf,pins = "cko0_rstgrp"; + sirf,function = "cko0_rst"; + }; + }; + cko1_rst_pins_a: cko1_rst_0 { + cko1_rst { + sirf,pins = "cko1_rstgrp"; + sirf,function = "cko1_rst"; + }; + }; + }; + + pwm@cc130000 { + compatible = "sirf,marco-pwm"; + reg = <0xcc130000 0x10000>; + }; + + efusesys@cc140000 { + compatible = "sirf,marco-efuse"; + reg = <0xcc140000 0x10000>; + }; + + pulsec@cc150000 { + compatible = "sirf,marco-pulsec"; + reg = <0xcc150000 0x10000>; + interrupts = <0 48 0>; + }; + + pci-iobg { + compatible = "sirf,marco-pciiobg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xcd000000 0xcd000000 0x1000000>; + + sd0: sdhci@cd000000 { + cell-index = <0>; + compatible = "sirf,marco-sdhc"; + reg = <0xcd000000 0x100000>; + interrupts = <0 38 0>; + status = "disabled"; + }; + + sd1: sdhci@cd100000 { + cell-index = <1>; + compatible = "sirf,marco-sdhc"; + reg = <0xcd100000 0x100000>; + interrupts = <0 38 0>; + status = "disabled"; + }; + + sd2: sdhci@cd200000 { + cell-index = <2>; + compatible = "sirf,marco-sdhc"; + reg = <0xcd200000 0x100000>; + interrupts = <0 23 0>; + status = "disabled"; + }; + + sd3: sdhci@cd300000 { + cell-index = <3>; + compatible = "sirf,marco-sdhc"; + reg = <0xcd300000 0x100000>; + interrupts = <0 23 0>; + status = "disabled"; + }; + + sd4: sdhci@cd400000 { + cell-index = <4>; + compatible = "sirf,marco-sdhc"; + reg = <0xcd400000 0x100000>; + interrupts = <0 39 0>; + status = "disabled"; + }; + + sd5: sdhci@cd500000 { + cell-index = <5>; + compatible = "sirf,marco-sdhc"; + reg = <0xcd500000 0x100000>; + interrupts = <0 39 0>; + status = "disabled"; + }; + + pci-copy@cd900000 { + compatible = "sirf,marco-pcicp"; + reg = <0xcd900000 0x100000>; + interrupts = <0 40 0>; + }; + + rom-interface@cda00000 { + compatible = "sirf,marco-romif"; + reg = <0xcda00000 0x100000>; + }; + }; + }; + + rtc-iobg { + compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xc1000000 0x10000>; + + gpsrtc@1000 { + compatible = "sirf,marco-gpsrtc"; + reg = <0x1000 0x1000>; + interrupts = <0 55 0>, + <0 56 0>, + <0 57 0>; + }; + + sysrtc@2000 { + compatible = "sirf,marco-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <0 52 0>, + <0 53 0>, + <0 54 0>; + }; + + pwrc@3000 { + compatible = "sirf,marco-pwrc"; + reg = <0x3000 0x1000>; + interrupts = <0 32 0>; + }; + }; + + uus-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xce000000 0xce000000 0x1000000>; + + usb0: usb@ce000000 { + compatible = "chipidea,ci13611a-marco"; + reg = <0xce000000 0x10000>; + interrupts = <0 10 0>; + }; + + usb1: usb@ce010000 { + compatible = "chipidea,ci13611a-marco"; + reg = <0xce010000 0x10000>; + interrupts = <0 11 0>; + }; + + security@ce020000 { + compatible = "sirf,marco-security"; + reg = <0xce020000 0x10000>; + interrupts = <0 42 0>; + }; + }; + + can-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xd0000000 0xd0000000 0x1000000>; + + can0: can@d0000000 { + compatible = "sirf,marco-can"; + reg = <0xd0000000 0x10000>; + }; + + can1: can@d0010000 { + compatible = "sirf,marco-can"; + reg = <0xd0010000 0x10000>; + }; + }; + + lvds-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xd1000000 0xd1000000 0x1000000>; + + lvds@d1000000 { + compatible = "sirf,marco-lvds"; + reg = <0xd1000000 0x10000>; + interrupts = <0 64 0>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index c9b4f27..7f70a39 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -29,6 +29,164 @@ }; twsi1: i2c@d4011000 { status = "okay"; + pmic: max8925@3c { + compatible = "maxium,max8925"; + reg = <0x3c>; + interrupts = <1>; + interrupt-parent = <&intcmux4>; + interrupt-controller; + #interrupt-cells = <1>; + maxim,tsc-irq = <0>; + + regulators { + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + SDV2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2225000>; + regulator-boot-on; + regulator-always-on; + }; + SDV3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO3 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO4 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO5 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO6 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO7 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO8 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO10 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + }; + LDO11 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO12 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO13 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO14 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO15 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO16 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO17 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO18 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO19 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO20 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + }; + backlight { + maxim,max8925-dual-string = <0>; + }; + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; + }; + }; }; rtc: rtc@d4010000 { status = "okay"; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 0514fb4..1429ac0 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -46,7 +46,7 @@ mrvl,intc-nr-irqs = <64>; }; - intcmux4@d4282150 { + intcmux4: interrupt-controller@d4282150 { compatible = "mrvl,mmp2-mux-intc"; interrupts = <4>; interrupt-controller; @@ -201,6 +201,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; + #address-cells = <1>; + #size-cells = <0>; mrvl,i2c-fast-mode; status = "disabled"; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 055fca5..3329719 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -58,10 +58,11 @@ #size-cells = <1>; ranges = <0x88000000 0x88000000 0x40000>; - clock-controller@88000000 { + clks: clock-controller@88000000 { compatible = "sirf,prima2-clkc"; reg = <0x88000000 0x1000>; interrupts = <3>; + #clock-cells = <1>; }; reset-controller@88010000 { @@ -85,6 +86,7 @@ compatible = "sirf,prima2-memc"; reg = <0x90000000 0x10000>; interrupts = <27>; + clocks = <&clks 5>; }; }; @@ -104,6 +106,7 @@ compatible = "sirf,prima2-vpp"; reg = <0x90020000 0x10000>; interrupts = <31>; + clocks = <&clks 35>; }; }; @@ -117,6 +120,7 @@ compatible = "powervr,sgx531"; reg = <0x98000000 0x8000000>; interrupts = <6>; + clocks = <&clks 32>; }; }; @@ -130,6 +134,7 @@ compatible = "sirf,prima2-video-codec"; reg = <0xa0000000 0x8000000>; interrupts = <5>; + clocks = <&clks 33>; }; }; @@ -149,12 +154,14 @@ compatible = "sirf,prima2-gps"; reg = <0xa8010000 0x10000>; interrupts = <7>; + clocks = <&clks 9>; }; dsp@a9000000 { compatible = "sirf,prima2-dsp"; reg = <0xa9000000 0x1000000>; interrupts = <8>; + clocks = <&clks 8>; }; }; @@ -174,12 +181,14 @@ compatible = "sirf,prima2-nand"; reg = <0xb0030000 0x10000>; interrupts = <41>; + clocks = <&clks 26>; }; audio@b0040000 { compatible = "sirf,prima2-audio"; reg = <0xb0040000 0x10000>; interrupts = <35>; + clocks = <&clks 27>; }; uart0: uart@b0050000 { @@ -187,6 +196,7 @@ compatible = "sirf,prima2-uart"; reg = <0xb0050000 0x10000>; interrupts = <17>; + clocks = <&clks 13>; }; uart1: uart@b0060000 { @@ -194,6 +204,7 @@ compatible = "sirf,prima2-uart"; reg = <0xb0060000 0x10000>; interrupts = <18>; + clocks = <&clks 14>; }; uart2: uart@b0070000 { @@ -201,6 +212,7 @@ compatible = "sirf,prima2-uart"; reg = <0xb0070000 0x10000>; interrupts = <19>; + clocks = <&clks 15>; }; usp0: usp@b0080000 { @@ -208,6 +220,7 @@ compatible = "sirf,prima2-usp"; reg = <0xb0080000 0x10000>; interrupts = <20>; + clocks = <&clks 28>; }; usp1: usp@b0090000 { @@ -215,6 +228,7 @@ compatible = "sirf,prima2-usp"; reg = <0xb0090000 0x10000>; interrupts = <21>; + clocks = <&clks 29>; }; usp2: usp@b00a0000 { @@ -222,6 +236,7 @@ compatible = "sirf,prima2-usp"; reg = <0xb00a0000 0x10000>; interrupts = <22>; + clocks = <&clks 30>; }; dmac0: dma-controller@b00b0000 { @@ -229,6 +244,7 @@ compatible = "sirf,prima2-dmac"; reg = <0xb00b0000 0x10000>; interrupts = <12>; + clocks = <&clks 24>; }; dmac1: dma-controller@b0160000 { @@ -236,11 +252,13 @@ compatible = "sirf,prima2-dmac"; reg = <0xb0160000 0x10000>; interrupts = <13>; + clocks = <&clks 25>; }; vip@b00C0000 { compatible = "sirf,prima2-vip"; reg = <0xb00C0000 0x10000>; + clocks = <&clks 31>; }; spi0: spi@b00d0000 { @@ -248,6 +266,7 @@ compatible = "sirf,prima2-spi"; reg = <0xb00d0000 0x10000>; interrupts = <15>; + clocks = <&clks 19>; }; spi1: spi@b0170000 { @@ -255,6 +274,7 @@ compatible = "sirf,prima2-spi"; reg = <0xb0170000 0x10000>; interrupts = <16>; + clocks = <&clks 20>; }; i2c0: i2c@b00e0000 { @@ -262,6 +282,7 @@ compatible = "sirf,prima2-i2c"; reg = <0xb00e0000 0x10000>; interrupts = <24>; + clocks = <&clks 17>; }; i2c1: i2c@b00f0000 { @@ -269,12 +290,14 @@ compatible = "sirf,prima2-i2c"; reg = <0xb00f0000 0x10000>; interrupts = <25>; + clocks = <&clks 18>; }; tsc@b0110000 { compatible = "sirf,prima2-tsc"; reg = <0xb0110000 0x10000>; interrupts = <33>; + clocks = <&clks 16>; }; gpio: pinctrl@b0120000 { @@ -507,17 +530,20 @@ pwm@b0130000 { compatible = "sirf,prima2-pwm"; reg = <0xb0130000 0x10000>; + clocks = <&clks 21>; }; efusesys@b0140000 { compatible = "sirf,prima2-efuse"; reg = <0xb0140000 0x10000>; + clocks = <&clks 22>; }; pulsec@b0150000 { compatible = "sirf,prima2-pulsec"; reg = <0xb0150000 0x10000>; interrupts = <48>; + clocks = <&clks 23>; }; pci-iobg { @@ -616,12 +642,14 @@ compatible = "chipidea,ci13611a-prima2"; reg = <0xb8000000 0x10000>; interrupts = <10>; + clocks = <&clks 40>; }; usb1: usb@b00f0000 { compatible = "chipidea,ci13611a-prima2"; reg = <0xb8010000 0x10000>; interrupts = <11>; + clocks = <&clks 41>; }; sata@b00f0000 { @@ -634,6 +662,7 @@ compatible = "sirf,prima2-security"; reg = <0xb8030000 0x10000>; interrupts = <42>; + clocks = <&clks 7>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index a7505a9..93da655 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -9,12 +9,16 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" +/include/ "r8a7740.dtsi" / { model = "armadillo 800 eva"; compatible = "renesas,armadillo800eva"; + chosen { + bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"; + }; + memory { device_type = "memory"; reg = <0x40000000 0x20000000>; diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts index 286f0ca..8acf51e 100644 --- a/arch/arm/boot/dts/sh7372-mackerel.dts +++ b/arch/arm/boot/dts/sh7372-mackerel.dts @@ -9,12 +9,16 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" +/include/ "sh7372.dtsi" / { model = "Mackerel (AP4 EVM 2nd)"; compatible = "renesas,mackerel"; + chosen { + bootargs = "console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp mem=240m rw"; + }; + memory { device_type = "memory"; reg = <0x40000000 0x10000000>; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index bcb9119..7c4071e 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -9,12 +9,16 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" +/include/ "sh73a0.dtsi" / { model = "KZM-A9-GT"; compatible = "renesas,kzm9g", "renesas,sh73a0"; + chosen { + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"; + }; + memory { device_type = "memory"; reg = <0x41000000 0x1e800000>; diff --git a/arch/arm/boot/dts/sh73a0-reference.dtsi b/arch/arm/boot/dts/sh73a0-reference.dtsi new file mode 100644 index 0000000..d4bb012 --- /dev/null +++ b/arch/arm/boot/dts/sh73a0-reference.dtsi @@ -0,0 +1,24 @@ +/* + * Device Tree Source for the SH73A0 SoC + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "sh73a0.dtsi" + +/ { + compatible = "renesas,sh73a0"; + + mmcif: mmcif@0x10010000 { + compatible = "renesas,sh-mmcif"; + reg = <0xe6bd0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 140 0x4 + 0 141 0x4>; + reg-io-width = <4>; + }; +}; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi new file mode 100644 index 0000000..8a59465 --- /dev/null +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -0,0 +1,100 @@ +/* + * Device Tree Source for the SH73A0 SoC + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,sh73a0"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + gic: interrupt-controller@f0001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xf0001000 0x1000>, + <0xf0000100 0x100>; + }; + + i2c0: i2c@0xe6820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xe6820000 0x425>; + interrupt-parent = <&gic>; + interrupts = <0 167 0x4 + 0 168 0x4 + 0 169 0x4 + 0 170 0x4>; + }; + + i2c1: i2c@0xe6822000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xe6822000 0x425>; + interrupt-parent = <&gic>; + interrupts = <0 51 0x4 + 0 52 0x4 + 0 53 0x4 + 0 54 0x4>; + }; + + i2c2: i2c@0xe6824000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xe6824000 0x425>; + interrupt-parent = <&gic>; + interrupts = <0 171 0x4 + 0 172 0x4 + 0 173 0x4 + 0 174 0x4>; + }; + + i2c3: i2c@0xe6826000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xe6826000 0x425>; + interrupt-parent = <&gic>; + interrupts = <0 183 0x4 + 0 184 0x4 + 0 185 0x4 + 0 186 0x4>; + }; + + i2c4: i2c@0xe6828000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,rmobile-iic"; + reg = <0xe6828000 0x425>; + interrupt-parent = <&gic>; + interrupts = <0 187 0x4 + 0 188 0x4 + 0 189 0x4 + 0 190 0x4>; + }; +}; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 19aec42..936d230 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -25,6 +25,10 @@ ethernet0 = &gmac0; serial0 = &uart0; serial1 = &uart1; + timer0 = &timer0; + timer1 = &timer1; + timer2 = &timer2; + timer3 = &timer3; }; cpus { @@ -98,47 +102,41 @@ interrupts = <1 13 0xf04>; }; - timer0: timer@ffc08000 { + timer0: timer0@ffc08000 { compatible = "snps,dw-apb-timer-sp"; interrupts = <0 167 4>; - clock-frequency = <200000000>; reg = <0xffc08000 0x1000>; }; - timer1: timer@ffc09000 { + timer1: timer1@ffc09000 { compatible = "snps,dw-apb-timer-sp"; interrupts = <0 168 4>; - clock-frequency = <200000000>; reg = <0xffc09000 0x1000>; }; - timer2: timer@ffd00000 { + timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer-osc"; interrupts = <0 169 4>; - clock-frequency = <200000000>; reg = <0xffd00000 0x1000>; }; - timer3: timer@ffd01000 { + timer3: timer3@ffd01000 { compatible = "snps,dw-apb-timer-osc"; interrupts = <0 170 4>; - clock-frequency = <200000000>; reg = <0xffd01000 0x1000>; }; - uart0: uart@ffc02000 { + uart0: serial0@ffc02000 { compatible = "snps,dw-apb-uart"; reg = <0xffc02000 0x1000>; - clock-frequency = <7372800>; interrupts = <0 162 4>; reg-shift = <2>; reg-io-width = <4>; }; - uart1: uart@ffc03000 { + uart1: serial1@ffc03000 { compatible = "snps,dw-apb-uart"; reg = <0xffc03000 0x1000>; - clock-frequency = <7372800>; interrupts = <0 163 4>; reg-shift = <2>; reg-io-width = <4>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts index ab7e4a9..3ae8a83 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5.dts @@ -20,7 +20,7 @@ / { model = "Altera SOCFPGA Cyclone V"; - compatible = "altr,socfpga-cyclone5"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; chosen { bootargs = "console=ttyS0,57600"; @@ -29,6 +29,36 @@ memory { name = "memory"; device_type = "memory"; - reg = <0x0 0x10000000>; /* 256MB */ + reg = <0x0 0x40000000>; /* 1GB */ + }; + + soc { + timer0@ffc08000 { + clock-frequency = <100000000>; + }; + + timer1@ffc09000 { + clock-frequency = <100000000>; + }; + + timer2@ffd00000 { + clock-frequency = <25000000>; + }; + + timer3@ffd01000 { + clock-frequency = <25000000>; + }; + + serial0@ffc02000 { + clock-frequency = <100000000>; + }; + + serial1@ffc03000 { + clock-frequency = <100000000>; + }; + + sysmgr@ffd08000 { + cpu1-start-addr = <0xffd080c4>; + }; }; }; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts new file mode 100644 index 0000000..1036eba --- /dev/null +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2013 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; +/include/ "socfpga.dtsi" + +/ { + model = "Altera SOCFPGA VT"; + compatible = "altr,socfpga-vt", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1 GB */ + }; + + soc { + timer0@ffc08000 { + clock-frequency = <7000000>; + }; + + timer1@ffc09000 { + clock-frequency = <7000000>; + }; + + timer2@ffd00000 { + clock-frequency = <7000000>; + }; + + timer3@ffd01000 { + clock-frequency = <7000000>; + }; + + serial0@ffc02000 { + clock-frequency = <7372800>; + }; + + serial1@ffc03000 { + clock-frequency = <7372800>; + }; + + sysmgr@ffd08000 { + cpu1-start-addr = <0xffd08010>; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts new file mode 100644 index 0000000..b28fbf3 --- /dev/null +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -0,0 +1,30 @@ +/* + * Device Tree for the ST-Ericsson Nomadik S8815 board + * Produced by Calao Systems + */ + +/dts-v1/; +/include/ "ste-nomadik-stn8815.dtsi" + +/ { + model = "Calao Systems USB-S8815"; + compatible = "calaosystems,usb-s8815"; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; + }; + + /* Custom board node with GPIO pins to active etc */ + usb-s8815 { + /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ + ethernet-gpio { + gpios = <&gpio3 19 0x1>; + interrupts = <19 0x1>; + interrupt-parent = <&gpio3>; + }; + /* This will bias the MMC/SD card detect line */ + mmcsd-gpio { + gpios = <&gpio3 16 0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi new file mode 100644 index 0000000..4a4aab3 --- /dev/null +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -0,0 +1,256 @@ +/* + * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC + */ +/include/ "skeleton.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0x00000000 0x04000000>, + <0x08000000 0x04000000>; + }; + + L2: l2-cache { + compatible = "arm,l210-cache"; + reg = <0x10210000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <30>; + cache-unified; + cache-level = <2>; + }; + + mtu0 { + /* Nomadik system timer */ + reg = <0x101e2000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <4>; + }; + + mtu1 { + /* Secondary timer */ + reg = <0x101e3000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <5>; + }; + + gpio0: gpio@101e4000 { + compatible = "st,nomadik-gpio"; + reg = <0x101e4000 0x80>; + interrupt-parent = <&vica>; + interrupts = <6>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <0>; + }; + + gpio1: gpio@101e5000 { + compatible = "st,nomadik-gpio"; + reg = <0x101e5000 0x80>; + interrupt-parent = <&vica>; + interrupts = <7>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <1>; + }; + + gpio2: gpio@101e6000 { + compatible = "st,nomadik-gpio"; + reg = <0x101e6000 0x80>; + interrupt-parent = <&vica>; + interrupts = <8>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <2>; + }; + + gpio3: gpio@101e7000 { + compatible = "st,nomadik-gpio"; + reg = <0x101e7000 0x80>; + interrupt-parent = <&vica>; + interrupts = <9>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <3>; + }; + + pinctrl { + compatible = "stericsson,nmk-pinctrl-stn8815"; + }; + + /* A NAND flash of 128 MiB */ + fsmc: flash@40000000 { + compatible = "stericsson,fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10100000 0x1000>, /* FSMC Register*/ + <0x40000000 0x2000>, /* NAND Base DATA */ + <0x41000000 0x2000>, /* NAND Base ADDR */ + <0x40800000 0x2000>; /* NAND Base CMD */ + reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; + status = "okay"; + + partition@0 { + label = "X-Loader(NAND)"; + reg = <0x0 0x40000>; + }; + partition@40000 { + label = "MemInit(NAND)"; + reg = <0x40000 0x40000>; + }; + partition@80000 { + label = "BootLoader(NAND)"; + reg = <0x80000 0x200000>; + }; + partition@280000 { + label = "Kernel zImage(NAND)"; + reg = <0x280000 0x300000>; + }; + partition@580000 { + label = "Root Filesystem(NAND)"; + reg = <0x580000 0x1600000>; + }; + partition@1b80000 { + label = "User Filesystem(NAND)"; + reg = <0x1b80000 0x6480000>; + }; + }; + + external-bus@34000000 { + compatible = "simple-bus"; + reg = <0x34000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x34000000 0x1000000>; + ethernet@300 { + compatible = "smsc,lan91c111"; + reg = <0x300 0x0fd00>; + }; + }; + + /* I2C0 connected to the STw4811 power management chip */ + i2c0 { + compatible = "i2c-gpio"; + gpios = <&gpio1 31 0>, /* sda */ + <&gpio1 30 0>; /* scl */ + #address-cells = <1>; + #size-cells = <0>; + + stw4811@2d { + compatible = "st,stw4811"; + reg = <0x2d>; + }; + }; + + /* I2C1 connected to various sensors */ + i2c1 { + compatible = "i2c-gpio"; + gpios = <&gpio1 22 0>, /* sda */ + <&gpio1 21 0>; /* scl */ + #address-cells = <1>; + #size-cells = <0>; + + camera@2d { + compatible = "st,camera"; + reg = <0x10>; + }; + stw5095@1a { + compatible = "st,stw5095"; + reg = <0x1a>; + }; + lis3lv02dl@1d { + compatible = "st,lis3lv02dl"; + reg = <0x1d>; + }; + }; + + /* I2C2 connected to the USB portions of the STw4811 only */ + i2c2 { + compatible = "i2c-gpio"; + gpios = <&gpio2 10 0>, /* sda */ + <&gpio2 9 0>; /* scl */ + #address-cells = <1>; + #size-cells = <0>; + stw4811@2d { + compatible = "st,stw4811-usb"; + reg = <0x2d>; + }; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vica: intc@0x10140000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10140000 0x20>; + }; + + vicb: intc@0x10140020 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10140020 0x20>; + }; + + uart0: uart@101fd000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101fd000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <12>; + }; + + uart1: uart@101fb000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101fb000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <17>; + }; + + uart2: uart@101f2000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101f2000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <28>; + status = "disabled"; + }; + + rng: rng@101b0000 { + compatible = "arm,primecell"; + reg = <0x101b0000 0x1000>; + }; + + rtc: rtc@101e8000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x101e8000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <10>; + }; + + mmcsd: sdi@101f6000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x101f6000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <22>; + max-frequency = <48000000>; + bus-width = <4>; + mmc-cap-mmc-highspeed; + mmc-cap-sd-highspeed; + cd-gpios = <&gpio3 15 0x1>; + cd-inverted; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts new file mode 100644 index 0000000..f84549a --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i-a10.dtsi" + +/ { + model = "Miniand Hackberry"; + compatible = "miniand,hackberry", "allwinner,sun4i-a10"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc { + uart0: uart@01c28000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index e61fdd4..f99f60d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -16,4 +16,34 @@ memory { reg = <0x40000000 0x80000000>; }; + + soc { + pinctrl@01c20800 { + compatible = "allwinner,sun4i-a10-pinctrl"; + reg = <0x01c20800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart1_pins_a: uart1@0 { + allwinner,pins = "PA10", "PA11"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 498a091..4a1e45d 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -24,6 +24,8 @@ soc { uart1: uart@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 59a2d26..e112189 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -17,4 +17,27 @@ memory { reg = <0x40000000 0x20000000>; }; + + soc { + pinctrl@01c20800 { + compatible = "allwinner,sun5i-a13-pinctrl"; + reg = <0x01c20800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + uart1_pins_a: uart1@0 { + allwinner,pins = "PE10", "PE11"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart1_pins_b: uart1@1 { + allwinner,pins = "PG3", "PG4"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts new file mode 100644 index 0000000..a30aca6 --- /dev/null +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "tegra114.dtsi" + +/ { + model = "NVIDIA Tegra114 Dalmore evaluation board"; + compatible = "nvidia,dalmore", "nvidia,tegra114"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + serial@70006300 { + status = "okay"; + clock-frequency = <408000000>; + }; + + pmc { + nvidia,invert-interrupt; + }; +}; diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts new file mode 100644 index 0000000..9bea8f5 --- /dev/null +++ b/arch/arm/boot/dts/tegra114-pluto.dts @@ -0,0 +1,21 @@ +/dts-v1/; + +/include/ "tegra114.dtsi" + +/ { + model = "NVIDIA Tegra114 Pluto evaluation board"; + compatible = "nvidia,pluto", "nvidia,tegra114"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + serial@70006300 { + status = "okay"; + clock-frequency = <408000000>; + }; + + pmc { + nvidia,invert-interrupt; + }; +}; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi new file mode 100644 index 0000000..1dfaf28 --- /dev/null +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -0,0 +1,153 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "nvidia,tegra114"; + interrupt-parent = <&gic>; + + gic: interrupt-controller { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x50041000 0x1000>, + <0x50042000 0x1000>, + <0x50044000 0x2000>, + <0x50046000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer@60005000 { + compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer"; + reg = <0x60005000 0x400>; + interrupts = <0 0 0x04 + 0 1 0x04 + 0 41 0x04 + 0 42 0x04 + 0 121 0x04 + 0 122 0x04>; + }; + + tegra_car: clock { + compatible = "nvidia,tegra114-car, nvidia,tegra30-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + }; + + ahb: ahb { + compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb"; + reg = <0x6000c004 0x14c>; + }; + + gpio: gpio { + compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 + 0 125 0x04>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + pinmux: pinmux { + compatible = "nvidia,tegra114-pinmux"; + reg = <0x70000868 0x148 /* Pad control registers */ + 0x70003000 0x40c>; /* Mux registers */ + }; + + serial@70006000 { + compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; + reg = <0x70006000 0x40>; + reg-shift = <2>; + interrupts = <0 36 0x04>; + status = "disabled"; + }; + + serial@70006040 { + compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; + reg = <0x70006040 0x40>; + reg-shift = <2>; + interrupts = <0 37 0x04>; + status = "disabled"; + }; + + serial@70006200 { + compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; + reg = <0x70006200 0x100>; + reg-shift = <2>; + interrupts = <0 46 0x04>; + status = "disabled"; + }; + + serial@70006300 { + compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; + reg = <0x70006300 0x100>; + reg-shift = <2>; + interrupts = <0 90 0x04>; + status = "disabled"; + }; + + rtc { + compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; + reg = <0x7000e000 0x100>; + interrupts = <0 2 0x04>; + }; + + pmc { + compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc"; + reg = <0x7000e400 0x400>; + }; + + iommu { + compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu"; + reg = <0x7000f010 0x02c + 0x7000f1f0 0x010 + 0x7000f228 0x074>; + nvidia,#asids = <4>; + dma-window = <0 0x40000000>; + nvidia,swgroups = <0x18659fe>; + nvidia,ahb = <&ahb>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi new file mode 100644 index 0000000..4441620 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -0,0 +1,491 @@ +/include/ "tegra20.dtsi" + +/ { + model = "Toradex Colibri T20 512MB"; + compatible = "toradex,colibri_t20-512", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + host1x { + hdmi { + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&i2c_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + audio_refclk { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + crt { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + displaya { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", + "ld4", "ld5", "ld6", "ld7", "ld8", + "ld9", "ld10", "ld11", "ld12", "ld13", + "ld14", "ld15", "ld16", "ld17", + "lhs", "lpw0", "lpw2", "lsc0", + "lsc1", "lsck", "lsda", "lspi", "lvs"; + nvidia,function = "displaya"; + nvidia,tristate = <1>; + }; + gpio_dte { + nvidia,pins = "dte"; + nvidia,function = "rsvd1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + gpio_gmi { + nvidia,pins = "ata", "atc", "atd", "ate", + "dap1", "dap2", "dap4", "gpu", "irrx", + "irtx", "spia", "spib", "spic"; + nvidia,function = "gmi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + gpio_pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + gpio_uac { + nvidia,pins = "uac"; + nvidia,function = "rsvd2"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + hdint { + nvidia,pins = "hdint"; + nvidia,function = "hdmi"; + nvidia,tristate = <1>; + }; + i2c1 { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + i2c3 { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + i2cddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + irda { + nvidia,pins = "uad"; + nvidia,function = "irda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + nand { + nvidia,pins = "kbca", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "nand"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + owc { + nvidia,pins = "owc"; + nvidia,function = "owr"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + nvidia,tristate = <0>; + }; + pwm { + nvidia,pins = "sdb", "sdc", "sdd"; + nvidia,function = "pwm"; + nvidia,tristate = <1>; + }; + sdio4 { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + spi1 { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + spi4 { + nvidia,pins = "slxa", "slxc", "slxd", "slxk"; + nvidia,function = "spi4"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + uarta { + nvidia,pins = "sdio1"; + nvidia,function = "uarta"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + uartd { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + ulpi { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + ulpi_refclk { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + usb_gpio { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + vi { + nvidia,pins = "dta", "dtb", "dtc", "dtd"; + nvidia,function = "vi"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + vi_sc { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + }; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + }; + + i2c_ddc: i2c@7000c400 { + clock-frequency = <100000>; + }; + + i2c@7000c500 { + clock-frequency = <400000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1275000>; + regulator-max-microvolt = <1275000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* LDO3 is not connected to anything */ + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vdd_fuse"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + hdmi_vdd_reg: regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + hdmi_pll_reg: regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + temperature-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + }; + + memory-controller@7000f400 { + emc-table@83250 { + reg = <83250>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <83250>; + nvidia,emc-registers = <0x00000005 0x00000011 + 0x00000004 0x00000002 0x00000004 0x00000004 + 0x00000001 0x0000000a 0x00000002 0x00000002 + 0x00000001 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x0000025f + 0x00000000 0x00000003 0x00000003 0x00000002 + 0x00000002 0x00000001 0x00000008 0x000000c8 + 0x00000003 0x00000005 0x00000003 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x00520006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + emc-table@133200 { + reg = <133200>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <133200>; + nvidia,emc-registers = <0x00000008 0x00000019 + 0x00000006 0x00000002 0x00000004 0x00000004 + 0x00000001 0x0000000a 0x00000002 0x00000002 + 0x00000002 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x0000039f + 0x00000000 0x00000003 0x00000003 0x00000002 + 0x00000002 0x00000001 0x00000008 0x000000c8 + 0x00000003 0x00000007 0x00000003 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x00510006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + emc-table@166500 { + reg = <166500>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <166500>; + nvidia,emc-registers = <0x0000000a 0x00000021 + 0x00000008 0x00000003 0x00000004 0x00000004 + 0x00000002 0x0000000a 0x00000003 0x00000003 + 0x00000002 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x000004df + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000001 0x00000009 0x000000c8 + 0x00000003 0x00000009 0x00000004 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x004f0006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + emc-table@333000 { + reg = <333000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <333000>; + nvidia,emc-registers = <0x00000014 0x00000041 + 0x0000000f 0x00000005 0x00000004 0x00000005 + 0x00000003 0x0000000a 0x00000005 0x00000005 + 0x00000004 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x000009ff + 0x00000000 0x00000003 0x00000003 0x00000005 + 0x00000005 0x00000001 0x0000000e 0x000000c8 + 0x00000003 0x00000011 0x00000006 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x00380006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + + ac97: ac97 { + status = "okay"; + nvidia,codec-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + nvidia,codec-sync-gpio = <&gpio 120 0>; /* gpio PP0 */ + }; + + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 23 0>; /* gpio PC7 */ + }; + + sound { + compatible = "nvidia,tegra-audio-wm9712-colibri_t20", + "nvidia,tegra-audio-wm9712"; + nvidia,model = "Colibri T20 AC97 Audio"; + + nvidia,audio-routing = + "Headphone", "HPOUTL", + "Headphone", "HPOUTR", + "LineIn", "LINEINL", + "LineIn", "LINEINR", + "Mic", "MIC1"; + + nvidia,ac97-controller = <&ac97>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "internal_usb"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + gpio = <&gpio 217 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 43eb72a..61d027f 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -3,7 +3,7 @@ /include/ "tegra20.dtsi" / { - model = "NVIDIA Tegra2 Harmony evaluation board"; + model = "NVIDIA Tegra20 Harmony evaluation board"; compatible = "nvidia,harmony", "nvidia,tegra20"; memory { @@ -252,7 +252,6 @@ serial@70006300 { status = "okay"; - clock-frequency = <216000000>; }; i2c@7000c000 { @@ -432,6 +431,10 @@ status = "okay"; }; + usb-phy@c5004400 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + sdhci@c8000200 { status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ @@ -448,6 +451,123 @@ bus-width = <8>; }; + kbc { + status = "okay"; + nvidia,debounce-delay-ms = <2>; + nvidia,repeat-delay-ms = <160>; + nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; + linux,keymap = <0x00020011 /* KEY_W */ + 0x0003001F /* KEY_S */ + 0x0004001E /* KEY_A */ + 0x0005002C /* KEY_Z */ + 0x000701D0 /* KEY_FN */ + 0x0107008B /* KEY_MENU */ + 0x02060038 /* KEY_LEFTALT */ + 0x02070064 /* KEY_RIGHTALT */ + 0x03000006 /* KEY_5 */ + 0x03010005 /* KEY_4 */ + 0x03020013 /* KEY_R */ + 0x03030012 /* KEY_E */ + 0x03040021 /* KEY_F */ + 0x03050020 /* KEY_D */ + 0x0306002D /* KEY_X */ + 0x04000008 /* KEY_7 */ + 0x04010007 /* KEY_6 */ + 0x04020014 /* KEY_T */ + 0x04030023 /* KEY_H */ + 0x04040022 /* KEY_G */ + 0x0405002F /* KEY_V */ + 0x0406002E /* KEY_C */ + 0x04070039 /* KEY_SPACE */ + 0x0500000A /* KEY_9 */ + 0x05010009 /* KEY_8 */ + 0x05020016 /* KEY_U */ + 0x05030015 /* KEY_Y */ + 0x05040024 /* KEY_J */ + 0x05050031 /* KEY_N */ + 0x05060030 /* KEY_B */ + 0x0507002B /* KEY_BACKSLASH */ + 0x0600000C /* KEY_MINUS */ + 0x0601000B /* KEY_0 */ + 0x06020018 /* KEY_O */ + 0x06030017 /* KEY_I */ + 0x06040026 /* KEY_L */ + 0x06050025 /* KEY_K */ + 0x06060033 /* KEY_COMMA */ + 0x06070032 /* KEY_M */ + 0x0701000D /* KEY_EQUAL */ + 0x0702001B /* KEY_RIGHTBRACE */ + 0x0703001C /* KEY_ENTER */ + 0x0707008B /* KEY_MENU */ + 0x0804002A /* KEY_LEFTSHIFT */ + 0x08050036 /* KEY_RIGHTSHIFT */ + 0x0905001D /* KEY_LEFTCTRL */ + 0x09070061 /* KEY_RIGHTCTRL */ + 0x0B00001A /* KEY_LEFTBRACE */ + 0x0B010019 /* KEY_P */ + 0x0B020028 /* KEY_APOSTROPHE */ + 0x0B030027 /* KEY_SEMICOLON */ + 0x0B040035 /* KEY_SLASH */ + 0x0B050034 /* KEY_DOT */ + 0x0C000044 /* KEY_F10 */ + 0x0C010043 /* KEY_F9 */ + 0x0C02000E /* KEY_BACKSPACE */ + 0x0C030004 /* KEY_3 */ + 0x0C040003 /* KEY_2 */ + 0x0C050067 /* KEY_UP */ + 0x0C0600D2 /* KEY_PRINT */ + 0x0C070077 /* KEY_PAUSE */ + 0x0D00006E /* KEY_INSERT */ + 0x0D01006F /* KEY_DELETE */ + 0x0D030068 /* KEY_PAGEUP */ + 0x0D04006D /* KEY_PAGEDOWN */ + 0x0D05006A /* KEY_RIGHT */ + 0x0D06006C /* KEY_DOWN */ + 0x0D070069 /* KEY_LEFT */ + 0x0E000057 /* KEY_F11 */ + 0x0E010058 /* KEY_F12 */ + 0x0E020042 /* KEY_F8 */ + 0x0E030010 /* KEY_Q */ + 0x0E04003E /* KEY_F4 */ + 0x0E05003D /* KEY_F3 */ + 0x0E060002 /* KEY_1 */ + 0x0E070041 /* KEY_F7 */ + 0x0F000001 /* KEY_ESC */ + 0x0F010029 /* KEY_GRAVE */ + 0x0F02003F /* KEY_F5 */ + 0x0F03000F /* KEY_TAB */ + 0x0F04003B /* KEY_F1 */ + 0x0F05003C /* KEY_F2 */ + 0x0F06003A /* KEY_CAPSLOCK */ + 0x0F070040 /* KEY_F6 */ + 0x14000047 /* KEY_KP7 */ + 0x15000049 /* KEY_KP9 */ + 0x15010048 /* KEY_KP8 */ + 0x1502004B /* KEY_KP4 */ + 0x1504004F /* KEY_KP1 */ + 0x1601004E /* KEY_KPSLASH */ + 0x1602004D /* KEY_KP6 */ + 0x1603004C /* KEY_KP5 */ + 0x16040051 /* KEY_KP3 */ + 0x16050050 /* KEY_KP2 */ + 0x16070052 /* KEY_KP0 */ + 0x1B010037 /* KEY_KPASTERISK */ + 0x1B03004A /* KEY_KPMINUS */ + 0x1B04004E /* KEY_KPPLUS */ + 0x1B050053 /* KEY_KPDOT */ + 0x1C050073 /* KEY_VOLUMEUP */ + 0x1D030066 /* KEY_HOME */ + 0x1D04006B /* KEY_END */ + 0x1D0500E1 /* KEY_BRIGHTNESSUP */ + 0x1D060072 /* KEY_VOLUMEDOWN */ + 0x1D0700E0 /* KEY_BRIGHTNESSDOWN */ + 0x1E000045 /* KEY_NUMLOCK */ + 0x1E010046 /* KEY_SCROLLLOCK */ + 0x1E020071 /* KEY_MUTE */ + 0x1F0400D6>; /* KEY_QUESTION */ + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts new file mode 100644 index 0000000..52f1103 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -0,0 +1,89 @@ +/dts-v1/; + +/include/ "tegra20-colibri-512.dtsi" + +/ { + model = "Toradex Colibri T20 512MB on Iris"; + compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20"; + + host1x { + hdmi { + status = "okay"; + }; + }; + + pinmux { + state_default: pinmux { + hdint { + nvidia,tristate = <0>; + }; + + i2cddc { + nvidia,tristate = <0>; + }; + + sdio4 { + nvidia,tristate = <0>; + }; + + uarta { + nvidia,tristate = <0>; + }; + + uartd { + nvidia,tristate = <0>; + }; + }; + }; + + usb@c5000000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb@c5008000 { + status = "okay"; + }; + + serial@70006000 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + }; + + i2c_ddc: i2c@7000c400 { + status = "okay"; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <4>; + vmmc-supply = <&vcc_sd_reg>; + vqmmc-supply = <&vcc_sd_reg>; + }; + + regulators { + regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_host_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + gpio = <&gpio 178 0>; + }; + + vcc_sd_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 6a93d14..54d6fce 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x20000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -232,12 +244,10 @@ serial@70006000 { status = "okay"; - clock-frequency = <216000000>; }; serial@70006200 { status = "okay"; - clock-frequency = <216000000>; }; i2c@7000c000 { @@ -252,9 +262,9 @@ }; }; - i2c@7000c400 { + hdmi_ddc: i2c@7000c400 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; }; nvec { @@ -266,6 +276,8 @@ clock-frequency = <80000>; request-gpios = <&gpio 170 0>; /* gpio PV2 */ slave-addr = <138>; + clocks = <&tegra_car 67>, <&tegra_car 124>; + clock-names = "div-clk", "fast-clk"; }; i2c@7000d000 { @@ -367,13 +379,13 @@ regulator-max-microvolt = <1800000>; }; - ldo7 { + hdmi_vdd_reg: ldo7 { regulator-name = "+3.3vs_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo8 { + hdmi_pll_reg: ldo8 { regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -418,6 +430,10 @@ status = "okay"; }; + usb-phy@c5004400 { + nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + }; + sdhci@c8000000 { status = "okay"; cd-gpios = <&gpio 173 0>; /* gpio PV5 */ diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 4204598..37b3a57 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x40000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -291,7 +303,6 @@ serial@70006300 { status = "okay"; - clock-frequency = <216000000>; }; i2c@7000c000 { @@ -345,7 +356,7 @@ pinctrl-1 = <&state_i2cmux_pta>; pinctrl-2 = <&state_i2cmux_idle>; - i2c@0 { + hdmi_ddc: i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -463,13 +474,13 @@ regulator-max-microvolt = <1800000>; }; - ldo7 { + hdmi_vdd_reg: ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo8 { + hdmi_pll_reg: ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -561,6 +572,10 @@ status = "okay"; }; + usb-phy@c5004400 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + sdhci@c8000000 { status = "okay"; power-gpios = <&gpio 86 0>; /* gpio PK6 */ @@ -600,6 +615,145 @@ }; }; + kbc { + status = "okay"; + nvidia,debounce-delay-ms = <32>; + nvidia,repeat-delay-ms = <160>; + nvidia,ghost-filter; + nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; + linux,keymap = <0x00020011 /* KEY_W */ + 0x0003001F /* KEY_S */ + 0x0004001E /* KEY_A */ + 0x0005002C /* KEY_Z */ + 0x000701d0 /* KEY_FN */ + + 0x0107007D /* KEY_LEFTMETA */ + 0x02060064 /* KEY_RIGHTALT */ + 0x02070038 /* KEY_LEFTALT */ + + 0x03000006 /* KEY_5 */ + 0x03010005 /* KEY_4 */ + 0x03020013 /* KEY_R */ + 0x03030012 /* KEY_E */ + 0x03040021 /* KEY_F */ + 0x03050020 /* KEY_D */ + 0x0306002D /* KEY_X */ + + 0x04000008 /* KEY_7 */ + 0x04010007 /* KEY_6 */ + 0x04020014 /* KEY_T */ + 0x04030023 /* KEY_H */ + 0x04040022 /* KEY_G */ + 0x0405002F /* KEY_V */ + 0x0406002E /* KEY_C */ + 0x04070039 /* KEY_SPACE */ + + 0x0500000A /* KEY_9 */ + 0x05010009 /* KEY_8 */ + 0x05020016 /* KEY_U */ + 0x05030015 /* KEY_Y */ + 0x05040024 /* KEY_J */ + 0x05050031 /* KEY_N */ + 0x05060030 /* KEY_B */ + 0x0507002B /* KEY_BACKSLASH */ + + 0x0600000C /* KEY_MINUS */ + 0x0601000B /* KEY_0 */ + 0x06020018 /* KEY_O */ + 0x06030017 /* KEY_I */ + 0x06040026 /* KEY_L */ + 0x06050025 /* KEY_K */ + 0x06060033 /* KEY_COMMA */ + 0x06070032 /* KEY_M */ + + 0x0701000D /* KEY_EQUAL */ + 0x0702001B /* KEY_RIGHTBRACE */ + 0x0703001C /* KEY_ENTER */ + 0x0707008B /* KEY_MENU */ + + 0x08040036 /* KEY_RIGHTSHIFT */ + 0x0805002A /* KEY_LEFTSHIFT */ + + 0x09050061 /* KEY_RIGHTCTRL */ + 0x0907001D /* KEY_LEFTCTRL */ + + 0x0B00001A /* KEY_LEFTBRACE */ + 0x0B010019 /* KEY_P */ + 0x0B020028 /* KEY_APOSTROPHE */ + 0x0B030027 /* KEY_SEMICOLON */ + 0x0B040035 /* KEY_SLASH */ + 0x0B050034 /* KEY_DOT */ + + 0x0C000044 /* KEY_F10 */ + 0x0C010043 /* KEY_F9 */ + 0x0C02000E /* KEY_BACKSPACE */ + 0x0C030004 /* KEY_3 */ + 0x0C040003 /* KEY_2 */ + 0x0C050067 /* KEY_UP */ + 0x0C0600D2 /* KEY_PRINT */ + 0x0C070077 /* KEY_PAUSE */ + + 0x0D00006E /* KEY_INSERT */ + 0x0D01006F /* KEY_DELETE */ + 0x0D030068 /* KEY_PAGEUP */ + 0x0D04006D /* KEY_PAGEDOWN */ + 0x0D05006A /* KEY_RIGHT */ + 0x0D06006C /* KEY_DOWN */ + 0x0D070069 /* KEY_LEFT */ + + 0x0E000057 /* KEY_F11 */ + 0x0E010058 /* KEY_F12 */ + 0x0E020042 /* KEY_F8 */ + 0x0E030010 /* KEY_Q */ + 0x0E04003E /* KEY_F4 */ + 0x0E05003D /* KEY_F3 */ + 0x0E060002 /* KEY_1 */ + 0x0E070041 /* KEY_F7 */ + + 0x0F000001 /* KEY_ESC */ + 0x0F010029 /* KEY_GRAVE */ + 0x0F02003F /* KEY_F5 */ + 0x0F03000F /* KEY_TAB */ + 0x0F04003B /* KEY_F1 */ + 0x0F05003C /* KEY_F2 */ + 0x0F06003A /* KEY_CAPSLOCK */ + 0x0F070040 /* KEY_F6 */ + + /* Software Handled Function Keys */ + 0x14000047 /* KEY_KP7 */ + + 0x15000049 /* KEY_KP9 */ + 0x15010048 /* KEY_KP8 */ + 0x1502004B /* KEY_KP4 */ + 0x1504004F /* KEY_KP1 */ + + 0x1601004E /* KEY_KPSLASH */ + 0x1602004D /* KEY_KP6 */ + 0x1603004C /* KEY_KP5 */ + 0x16040051 /* KEY_KP3 */ + 0x16050050 /* KEY_KP2 */ + 0x16070052 /* KEY_KP0 */ + + 0x1B010037 /* KEY_KPASTERISK */ + 0x1B03004A /* KEY_KPMINUS */ + 0x1B04004E /* KEY_KPPLUS */ + 0x1B050053 /* KEY_KPDOT */ + + 0x1C050073 /* KEY_VOLUMEUP */ + + 0x1D030066 /* KEY_HOME */ + 0x1D04006B /* KEY_END */ + 0x1D0500E0 /* KEY_BRIGHTNESSDOWN */ + 0x1D060072 /* KEY_VOLUMEDOWN */ + 0x1D0700E1 /* KEY_BRIGHTNESSUP */ + + 0x1E000045 /* KEY_NUMLOCK */ + 0x1E010046 /* KEY_SCROLLLOCK */ + 0x1E020071 /* KEY_MUTE */ + + 0x1F04008A>; /* KEY_HELP */ + }; regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index a239ccd..4766aba 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -276,7 +276,6 @@ }; serial@70006300 { - clock-frequency = <216000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index b70b4cb..5d79e4f 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -249,6 +249,11 @@ "ld23_22"; nvidia,pull = <1>; }; + conf_spif { + nvidia,pins = "spif"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + }; }; }; @@ -258,7 +263,6 @@ serial@70006000 { status = "okay"; - clock-frequency = <216000000>; }; dvi_ddc: i2c@7000c000 { @@ -310,6 +314,10 @@ status = "okay"; }; + usb-phy@c5004400 { + nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + }; + sdhci@c8000000 { status = "okay"; bus-width = <4>; @@ -322,6 +330,11 @@ bus-width = <4>; }; + poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 191 1>; /* gpio PX7, active low */ + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index adc4754..425c890 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -3,13 +3,25 @@ /include/ "tegra20.dtsi" / { - model = "NVIDIA Tegra2 Ventana evaluation board"; + model = "NVIDIA Tegra20 Ventana evaluation board"; compatible = "nvidia,ventana", "nvidia,tegra20"; memory { reg = <0x00000000 0x40000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -288,7 +300,6 @@ serial@70006300 { status = "okay"; - clock-frequency = <216000000>; }; i2c@7000c000 { @@ -320,7 +331,7 @@ i2c@7000c400 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; }; i2cmux { @@ -335,7 +346,7 @@ pinctrl-1 = <&state_i2cmux_pta>; pinctrl-2 = <&state_i2cmux_idle>; - i2c@0 { + hdmi_ddc: i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -446,13 +457,13 @@ regulator-max-microvolt = <1800000>; }; - ldo7 { + hdmi_vdd_reg: ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo8 { + hdmi_pll_reg: ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -497,6 +508,10 @@ status = "okay"; }; + usb-phy@c5004400 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + sdhci@c8000000 { status = "okay"; power-gpios = <&gpio 86 0>; /* gpio PK6 */ diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 20d576e..ea57c0f 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -3,7 +3,7 @@ /include/ "tegra20.dtsi" / { - model = "NVIDIA Tegra2 Whistler evaluation board"; + model = "NVIDIA Tegra20 Whistler evaluation board"; compatible = "nvidia,whistler", "nvidia,tegra20"; memory { @@ -255,7 +255,6 @@ serial@70006000 { status = "okay"; - clock-frequency = <216000000>; }; hdmi_ddc: i2c@7000c400 { @@ -520,6 +519,18 @@ bus-width = <8>; }; + kbc { + status = "okay"; + nvidia,debounce-delay-ms = <20>; + nvidia,repeat-delay-ms = <160>; + nvidia,kbc-row-pins = <0 1 2>; + nvidia,kbc-col-pins = <16 17>; + linux,keymap = <0x00000074 /* KEY_POWER */ + 0x01000066 /* KEY_HOME */ + 0x0101009E /* KEY_BACK */ + 0x0201008B>; /* KEY_MENU */ + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index b8effa1..9a42893 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,11 +4,20 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; + aliases { + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + serial4 = &uarte; + }; + host1x { compatible = "nvidia,tegra20-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; interrupts = <0 65 0x04 /* mpcore syncpt */ 0 67 0x04>; /* mpcore general */ + clocks = <&tegra_car 28>; #address-cells = <1>; #size-cells = <1>; @@ -19,41 +28,49 @@ compatible = "nvidia,tegra20-mpe"; reg = <0x54040000 0x00040000>; interrupts = <0 68 0x04>; + clocks = <&tegra_car 60>; }; vi { compatible = "nvidia,tegra20-vi"; reg = <0x54080000 0x00040000>; interrupts = <0 69 0x04>; + clocks = <&tegra_car 100>; }; epp { compatible = "nvidia,tegra20-epp"; reg = <0x540c0000 0x00040000>; interrupts = <0 70 0x04>; + clocks = <&tegra_car 19>; }; isp { compatible = "nvidia,tegra20-isp"; reg = <0x54100000 0x00040000>; interrupts = <0 71 0x04>; + clocks = <&tegra_car 23>; }; gr2d { compatible = "nvidia,tegra20-gr2d"; reg = <0x54140000 0x00040000>; interrupts = <0 72 0x04>; + clocks = <&tegra_car 21>; }; gr3d { compatible = "nvidia,tegra20-gr3d"; reg = <0x54180000 0x00040000>; + clocks = <&tegra_car 24>; }; dc@54200000 { compatible = "nvidia,tegra20-dc"; reg = <0x54200000 0x00040000>; interrupts = <0 73 0x04>; + clocks = <&tegra_car 27>, <&tegra_car 121>; + clock-names = "disp1", "parent"; rgb { status = "disabled"; @@ -64,6 +81,8 @@ compatible = "nvidia,tegra20-dc"; reg = <0x54240000 0x00040000>; interrupts = <0 74 0x04>; + clocks = <&tegra_car 26>, <&tegra_car 121>; + clock-names = "disp2", "parent"; rgb { status = "disabled"; @@ -74,6 +93,8 @@ compatible = "nvidia,tegra20-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <0 75 0x04>; + clocks = <&tegra_car 51>, <&tegra_car 117>; + clock-names = "hdmi", "parent"; status = "disabled"; }; @@ -81,12 +102,14 @@ compatible = "nvidia,tegra20-tvo"; reg = <0x542c0000 0x00040000>; interrupts = <0 76 0x04>; + clocks = <&tegra_car 102>; status = "disabled"; }; dsi { compatible = "nvidia,tegra20-dsi"; reg = <0x54300000 0x00040000>; + clocks = <&tegra_car 48>; status = "disabled"; }; }; @@ -97,15 +120,6 @@ interrupts = <1 13 0x304>; }; - cache-controller@50043000 { - compatible = "arm,pl310-cache"; - reg = <0x50043000 0x1000>; - arm,data-latency = <5 5 2>; - arm,tag-latency = <4 4 2>; - cache-unified; - cache-level = <2>; - }; - intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 @@ -114,6 +128,15 @@ #interrupt-cells = <3>; }; + cache-controller { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <5 5 2>; + arm,tag-latency = <4 4 2>; + cache-unified; + cache-level = <2>; + }; + timer@60005000 { compatible = "nvidia,tegra20-timer"; reg = <0x60005000 0x60>; @@ -123,6 +146,12 @@ 0 42 0x04>; }; + tegra_car: clock { + compatible = "nvidia,tegra20-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + }; + apbdma: dma { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>; @@ -142,6 +171,7 @@ 0 117 0x04 0 118 0x04 0 119 0x04>; + clocks = <&tegra_car 34>; }; ahb { @@ -177,12 +207,22 @@ compatible = "nvidia,tegra20-das"; reg = <0x70000c00 0x80>; }; + + tegra_ac97: ac97 { + compatible = "nvidia,tegra20-ac97"; + reg = <0x70002000 0x200>; + interrupts = <0 81 0x04>; + nvidia,dma-request-selector = <&apbdma 12>; + clocks = <&tegra_car 3>; + status = "disabled"; + }; tegra_i2s1: i2s@70002800 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x200>; interrupts = <0 13 0x04>; nvidia,dma-request-selector = <&apbdma 2>; + clocks = <&tegra_car 11>; status = "disabled"; }; @@ -191,46 +231,64 @@ reg = <0x70002a00 0x200>; interrupts = <0 3 0x04>; nvidia,dma-request-selector = <&apbdma 1>; + clocks = <&tegra_car 18>; status = "disabled"; }; - serial@70006000 { + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra20-uart" and to enable the APB DMA based serial + * driver, the comptible is "nvidia,tegra20-hsuart". + */ + uarta: serial@70006000 { compatible = "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; + nvidia,dma-request-selector = <&apbdma 8>; + clocks = <&tegra_car 6>; status = "disabled"; }; - serial@70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; + nvidia,dma-request-selector = <&apbdma 9>; + clocks = <&tegra_car 96>; status = "disabled"; }; - serial@70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; + nvidia,dma-request-selector = <&apbdma 10>; + clocks = <&tegra_car 55>; status = "disabled"; }; - serial@70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; + nvidia,dma-request-selector = <&apbdma 19>; + clocks = <&tegra_car 65>; status = "disabled"; }; - serial@70006400 { + uarte: serial@70006400 { compatible = "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; + nvidia,dma-request-selector = <&apbdma 20>; + clocks = <&tegra_car 66>; status = "disabled"; }; @@ -238,6 +296,7 @@ compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; + clocks = <&tegra_car 17>; }; rtc { @@ -252,6 +311,8 @@ interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 12>, <&tegra_car 124>; + clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -262,6 +323,7 @@ nvidia,dma-request-selector = <&apbdma 11>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 43>; status = "disabled"; }; @@ -271,6 +333,8 @@ interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 54>, <&tegra_car 124>; + clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -280,6 +344,8 @@ interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 67>, <&tegra_car 124>; + clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -289,6 +355,8 @@ interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 47>, <&tegra_car 124>; + clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -299,6 +367,7 @@ nvidia,dma-request-selector = <&apbdma 15>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 41>; status = "disabled"; }; @@ -309,6 +378,7 @@ nvidia,dma-request-selector = <&apbdma 16>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 44>; status = "disabled"; }; @@ -319,6 +389,7 @@ nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 46>; status = "disabled"; }; @@ -329,6 +400,15 @@ nvidia,dma-request-selector = <&apbdma 18>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 68>; + status = "disabled"; + }; + + kbc { + compatible = "nvidia,tegra20-kbc"; + reg = <0x7000e200 0x100>; + interrupts = <0 85 0x04>; + clocks = <&tegra_car 36>; status = "disabled"; }; @@ -344,7 +424,7 @@ interrupts = <0 77 0x04>; }; - gart { + iommu { compatible = "nvidia,tegra20-gart"; reg = <0x7000f024 0x00000018 /* controller registers */ 0x58000000 0x02000000>; /* GART aperture */ @@ -357,12 +437,40 @@ #size-cells = <0>; }; + phy1: usb-phy@c5000400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5000400 0x3c00>; + phy_type = "utmi"; + nvidia,has-legacy-mode; + clocks = <&tegra_car 22>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + + phy2: usb-phy@c5004400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5004400 0x3c00>; + phy_type = "ulpi"; + clocks = <&tegra_car 94>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + + phy3: usb-phy@c5008400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5008400 0x3C00>; + phy_type = "utmi"; + clocks = <&tegra_car 22>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + usb@c5000000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5000000 0x4000>; interrupts = <0 20 0x04>; phy_type = "utmi"; nvidia,has-legacy-mode; + clocks = <&tegra_car 22>; + nvidia,needs-double-reset; + nvidia,phy = <&phy1>; status = "disabled"; }; @@ -371,6 +479,8 @@ reg = <0xc5004000 0x4000>; interrupts = <0 21 0x04>; phy_type = "ulpi"; + clocks = <&tegra_car 58>; + nvidia,phy = <&phy2>; status = "disabled"; }; @@ -379,6 +489,8 @@ reg = <0xc5008000 0x4000>; interrupts = <0 97 0x04>; phy_type = "utmi"; + clocks = <&tegra_car 59>; + nvidia,phy = <&phy3>; status = "disabled"; }; @@ -386,6 +498,7 @@ compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; interrupts = <0 14 0x04>; + clocks = <&tegra_car 14>; status = "disabled"; }; @@ -393,6 +506,7 @@ compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; interrupts = <0 15 0x04>; + clocks = <&tegra_car 9>; status = "disabled"; }; @@ -400,6 +514,7 @@ compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; interrupts = <0 19 0x04>; + clocks = <&tegra_car 69>; status = "disabled"; }; @@ -407,9 +522,27 @@ compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; interrupts = <0 31 0x04>; + clocks = <&tegra_car 15>; status = "disabled"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <0 56 0x04 diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts new file mode 100644 index 0000000..8ff2ff2 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -0,0 +1,373 @@ +/dts-v1/; + +/include/ "tegra30.dtsi" + +/ { + model = "NVIDIA Tegra30 Beaver evaluation board"; + compatible = "nvidia,beaver", "nvidia,tegra30"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <0>; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = <1>; + nvidia,slew-rate-falling = <1>; + }; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + tps62361 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <0 86 0x4>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_5v_in_reg>; + vcc2-supply = <&vdd_5v_in_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&vdd_5v_in_reg>; + vcc5-supply = <&vdd_5v_in_reg>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_5v_in_reg>; + vccio-supply = <&vdd_5v_in_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd2_reg: vdd2 { + regulator-name = "vdd_1v5_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2_reg: ldo2 { + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* LDO3 is not connected to anything */ + + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7_reg: ldo7 { + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + }; + + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@1 { + compatible = "winbond,w25q32"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + + ahub { + i2s@70080400 { + status = "okay"; + }; + }; + + pmc { + status = "okay"; + nvidia,invert-interrupt; + }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v_in_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v_in"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + chargepump_5v_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "chargepump_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ + }; + + ddr_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 0>; /* PMIC TPS65911 GPIO7 */ + vin-supply = <&vdd_5v_in_reg>; + }; + + vdd_5v_sata_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_5v_sata"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 30 0>; /* gpio PD6 */ + vin-supply = <&vdd_5v_in_reg>; + }; + + usb1_vbus_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 68 0>; /* GPIO PI4 */ + gpio-open-drain; + vin-supply = <&vdd_5v_in_reg>; + }; + + usb3_vbus_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 63 0>; /* GPIO PH7 */ + gpio-open-drain; + vin-supply = <&vdd_5v_in_reg>; + }; + + sys_3v3_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "sys_3v3,vdd_3v3_alw"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 0>; /* PMIC TPS65911 GPIO6 */ + vin-supply = <&vdd_5v_in_reg>; + }; + + sys_3v3_pexs_reg: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "sys_3v3_pexs"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 95 0>; /* gpio PL7 */ + vin-supply = <&sys_3v3_reg>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index bdb2a66..1749927 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -106,12 +106,25 @@ nvidia,slew-rate-rising = <1>; nvidia,slew-rate-falling = <1>; }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6", + "uart3_cts_n_pa1", + "uart3_rts_n_pc0", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; }; }; serial@70006000 { status = "okay"; - clock-frequency = <408000000>; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; }; i2c@7000c000 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 529fdb8..767803e 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,11 +4,20 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; + aliases { + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + serial4 = &uarte; + }; + host1x { compatible = "nvidia,tegra30-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; interrupts = <0 65 0x04 /* mpcore syncpt */ 0 67 0x04>; /* mpcore general */ + clocks = <&tegra_car 28>; #address-cells = <1>; #size-cells = <1>; @@ -19,41 +28,50 @@ compatible = "nvidia,tegra30-mpe"; reg = <0x54040000 0x00040000>; interrupts = <0 68 0x04>; + clocks = <&tegra_car 60>; }; vi { compatible = "nvidia,tegra30-vi"; reg = <0x54080000 0x00040000>; interrupts = <0 69 0x04>; + clocks = <&tegra_car 164>; }; epp { compatible = "nvidia,tegra30-epp"; reg = <0x540c0000 0x00040000>; interrupts = <0 70 0x04>; + clocks = <&tegra_car 19>; }; isp { compatible = "nvidia,tegra30-isp"; reg = <0x54100000 0x00040000>; interrupts = <0 71 0x04>; + clocks = <&tegra_car 23>; }; gr2d { compatible = "nvidia,tegra30-gr2d"; reg = <0x54140000 0x00040000>; interrupts = <0 72 0x04>; + clocks = <&tegra_car 21>; }; gr3d { compatible = "nvidia,tegra30-gr3d"; reg = <0x54180000 0x00040000>; + clocks = <&tegra_car 24 &tegra_car 98>; + clock-names = "3d", "3d2"; }; dc@54200000 { compatible = "nvidia,tegra30-dc"; reg = <0x54200000 0x00040000>; interrupts = <0 73 0x04>; + clocks = <&tegra_car 27>, <&tegra_car 179>; + clock-names = "disp1", "parent"; rgb { status = "disabled"; @@ -64,6 +82,8 @@ compatible = "nvidia,tegra30-dc"; reg = <0x54240000 0x00040000>; interrupts = <0 74 0x04>; + clocks = <&tegra_car 26>, <&tegra_car 179>; + clock-names = "disp2", "parent"; rgb { status = "disabled"; @@ -74,6 +94,8 @@ compatible = "nvidia,tegra30-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <0 75 0x04>; + clocks = <&tegra_car 51>, <&tegra_car 189>; + clock-names = "hdmi", "parent"; status = "disabled"; }; @@ -81,12 +103,14 @@ compatible = "nvidia,tegra30-tvo"; reg = <0x542c0000 0x00040000>; interrupts = <0 76 0x04>; + clocks = <&tegra_car 169>; status = "disabled"; }; dsi { compatible = "nvidia,tegra30-dsi"; reg = <0x54300000 0x00040000>; + clocks = <&tegra_car 48>; status = "disabled"; }; }; @@ -97,15 +121,6 @@ interrupts = <1 13 0xf04>; }; - cache-controller@50043000 { - compatible = "arm,pl310-cache"; - reg = <0x50043000 0x1000>; - arm,data-latency = <6 6 2>; - arm,tag-latency = <5 5 2>; - cache-unified; - cache-level = <2>; - }; - intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 @@ -114,6 +129,15 @@ #interrupt-cells = <3>; }; + cache-controller { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <6 6 2>; + arm,tag-latency = <5 5 2>; + cache-unified; + cache-level = <2>; + }; + timer@60005000 { compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; @@ -125,6 +149,12 @@ 0 122 0x04>; }; + tegra_car: clock { + compatible = "nvidia,tegra30-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + }; + apbdma: dma { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; @@ -160,6 +190,7 @@ 0 141 0x04 0 142 0x04 0 143 0x04>; + clocks = <&tegra_car 34>; }; ahb: ahb { @@ -168,7 +199,7 @@ }; gpio: gpio { - compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio"; + compatible = "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; interrupts = <0 32 0x04 0 33 0x04 @@ -190,43 +221,61 @@ 0x70003000 0x3e4>; /* Mux registers */ }; - serial@70006000 { + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the comptible is + * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart". + */ + uarta: serial@70006000 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; + nvidia,dma-request-selector = <&apbdma 8>; + clocks = <&tegra_car 6>; status = "disabled"; }; - serial@70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; + nvidia,dma-request-selector = <&apbdma 9>; + clocks = <&tegra_car 160>; status = "disabled"; }; - serial@70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; + nvidia,dma-request-selector = <&apbdma 10>; + clocks = <&tegra_car 55>; status = "disabled"; }; - serial@70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; + nvidia,dma-request-selector = <&apbdma 19>; + clocks = <&tegra_car 65>; status = "disabled"; }; - serial@70006400 { + uarte: serial@70006400 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; + nvidia,dma-request-selector = <&apbdma 20>; + clocks = <&tegra_car 66>; status = "disabled"; }; @@ -234,6 +283,7 @@ compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; + clocks = <&tegra_car 17>; }; rtc { @@ -248,6 +298,8 @@ interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 12>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -257,6 +309,8 @@ interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 54>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -266,6 +320,8 @@ interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 67>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -275,6 +331,8 @@ interrupts = <0 120 0x04>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 103>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -284,6 +342,8 @@ interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 47>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; status = "disabled"; }; @@ -294,6 +354,7 @@ nvidia,dma-request-selector = <&apbdma 15>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 41>; status = "disabled"; }; @@ -304,6 +365,7 @@ nvidia,dma-request-selector = <&apbdma 16>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 44>; status = "disabled"; }; @@ -314,6 +376,7 @@ nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 46>; status = "disabled"; }; @@ -324,6 +387,7 @@ nvidia,dma-request-selector = <&apbdma 18>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 68>; status = "disabled"; }; @@ -334,6 +398,7 @@ nvidia,dma-request-selector = <&apbdma 27>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 104>; status = "disabled"; }; @@ -344,6 +409,15 @@ nvidia,dma-request-selector = <&apbdma 28>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car 105>; + status = "disabled"; + }; + + kbc { + compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc"; + reg = <0x7000e200 0x100>; + interrupts = <0 85 0x04>; + clocks = <&tegra_car 36>; status = "disabled"; }; @@ -361,7 +435,7 @@ interrupts = <0 77 0x04>; }; - smmu { + iommu { compatible = "nvidia,tegra30-smmu"; reg = <0x7000f010 0x02c 0x7000f1f0 0x010 @@ -377,7 +451,13 @@ 0x70080200 0x100>; interrupts = <0 103 0x04>; nvidia,dma-request-selector = <&apbdma 1>; - + clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>, + <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>, + <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>, + <&tegra_car 110>, <&tegra_car 162>; + clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + "i2s3", "i2s4", "dam0", "dam1", "dam2", + "spdif_in"; ranges; #address-cells = <1>; #size-cells = <1>; @@ -386,6 +466,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car 30>; status = "disabled"; }; @@ -393,6 +474,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080400 0x100>; nvidia,ahub-cif-ids = <5 5>; + clocks = <&tegra_car 11>; status = "disabled"; }; @@ -400,6 +482,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080500 0x100>; nvidia,ahub-cif-ids = <6 6>; + clocks = <&tegra_car 18>; status = "disabled"; }; @@ -407,6 +490,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080600 0x100>; nvidia,ahub-cif-ids = <7 7>; + clocks = <&tegra_car 101>; status = "disabled"; }; @@ -414,6 +498,7 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080700 0x100>; nvidia,ahub-cif-ids = <8 8>; + clocks = <&tegra_car 102>; status = "disabled"; }; }; @@ -422,6 +507,7 @@ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000000 0x200>; interrupts = <0 14 0x04>; + clocks = <&tegra_car 14>; status = "disabled"; }; @@ -429,6 +515,7 @@ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000200 0x200>; interrupts = <0 15 0x04>; + clocks = <&tegra_car 9>; status = "disabled"; }; @@ -436,6 +523,7 @@ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000400 0x200>; interrupts = <0 19 0x04>; + clocks = <&tegra_car 69>; status = "disabled"; }; @@ -443,9 +531,39 @@ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000600 0x200>; interrupts = <0 31 0x04>; + clocks = <&tegra_car 15>; status = "disabled"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + }; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <0 144 0x04 diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index a3d37ec..7318717 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -70,7 +70,7 @@ compatible = "arm,sp805", "arm,primecell"; status = "disabled"; reg = <0 0x2b060000 0 0x1000>; - interrupts = <98>; + interrupts = <0 98 4>; clocks = <&oscclk7>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index cf8071a..dfe371e 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -72,7 +72,7 @@ wdt@2a490000 { compatible = "arm,sp805", "arm,primecell"; reg = <0 0x2a490000 0 0x1000>; - interrupts = <98>; + interrupts = <0 98 4>; clocks = <&oscclk6a>, <&oscclk6a>; clock-names = "wdogclk", "apb_pclk"; }; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index d8645e9..cf31ced 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -45,6 +45,38 @@ compatible = "fixed-clock"; clock-frequency = <24000000>; }; + + clkuart0: uart0 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <1>; + }; + + clkuart1: uart1 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <2>; + }; + + clkuart2: uart2 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <3>; + }; + + clkuart3: uart3 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <4>; + }; }; }; @@ -83,28 +115,28 @@ compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; - clocks = <&ref24>; + clocks = <&clkuart0>; }; uart@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; - clocks = <&ref24>; + clocks = <&clkuart1>; }; uart@d8210000 { compatible = "via,vt8500-uart"; reg = <0xd8210000 0x1040>; interrupts = <47>; - clocks = <&ref24>; + clocks = <&clkuart2>; }; uart@d82c0000 { compatible = "via,vt8500-uart"; reg = <0xd82c0000 0x1040>; interrupts = <50>; - clocks = <&ref24>; + clocks = <&clkuart3>; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index 330f833..e74a1c0 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -59,6 +59,54 @@ compatible = "fixed-clock"; clock-frequency = <24000000>; }; + + clkuart0: uart0 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <1>; + }; + + clkuart1: uart1 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <2>; + }; + + clkuart2: uart2 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <3>; + }; + + clkuart3: uart3 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <4>; + }; + + clkuart4: uart4 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <22>; + }; + + clkuart5: uart5 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <23>; + }; }; }; @@ -96,42 +144,42 @@ compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; - clocks = <&ref24>; + clocks = <&clkuart0>; }; uart@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; - clocks = <&ref24>; + clocks = <&clkuart1>; }; uart@d8210000 { compatible = "via,vt8500-uart"; reg = <0xd8210000 0x1040>; interrupts = <47>; - clocks = <&ref24>; + clocks = <&clkuart2>; }; uart@d82c0000 { compatible = "via,vt8500-uart"; reg = <0xd82c0000 0x1040>; interrupts = <50>; - clocks = <&ref24>; + clocks = <&clkuart3>; }; uart@d8370000 { compatible = "via,vt8500-uart"; reg = <0xd8370000 0x1040>; interrupts = <31>; - clocks = <&ref24>; + clocks = <&clkuart4>; }; uart@d8380000 { compatible = "via,vt8500-uart"; reg = <0xd8380000 0x1040>; interrupts = <30>; - clocks = <&ref24>; + clocks = <&clkuart5>; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index 83b9467..db3c0a1 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -75,6 +75,22 @@ reg = <0x204>; }; + clkuart0: uart0 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <1>; + }; + + clkuart1: uart1 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x250>; + enable-bit = <2>; + }; + arm: arm { #clock-cells = <0>; compatible = "via,vt8500-device-clock"; @@ -128,14 +144,14 @@ compatible = "via,vt8500-uart"; reg = <0xd8200000 0x1040>; interrupts = <32>; - clocks = <&ref24>; + clocks = <&clkuart0>; }; uart@d82b0000 { compatible = "via,vt8500-uart"; reg = <0xd82b0000 0x1040>; interrupts = <33>; - clocks = <&ref24>; + clocks = <&clkuart1>; }; rtc@d8100000 { diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts new file mode 100644 index 0000000..fcc660c --- /dev/null +++ b/arch/arm/boot/dts/wm8850-w70v2.dts @@ -0,0 +1,47 @@ +/* + * wm8850-w70v2.dts + * - Device tree file for Wondermedia WM8850 Tablet + * - 'W70-V2' mainboard + * - HongLianYing 'HLY070ML268-21A' 7" LCD panel + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8850.dtsi" + +/ { + model = "Wondermedia WM8850-W70v2 Tablet"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <16>; /* non-standard but required */ + }; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 1>; /* duty inverted */ + + brightness-levels = <0 40 60 80 100 130 190 255>; + default-brightness-level = <5>; + }; +}; diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi new file mode 100644 index 0000000..e8cbfdc --- /dev/null +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -0,0 +1,224 @@ +/* + * wm8850.dtsi - Device tree file for Wondermedia WM8850 SoC + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "wm,wm8850"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc0>; + + intc0: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + /* Secondary IC cascaded to intc0 */ + intc1: interrupt-controller@d8150000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xD8150000 0x10000>; + interrupts = <56 57 58 59 60 61 62 63>; + }; + + gpio: gpio-controller@d8110000 { + compatible = "wm,wm8650-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + plla: plla { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; + }; + + pllb: pllb { + #clock-cells = <0>; + compatible = "wm,wm8750-pll-clock"; + clocks = <&ref25>; + reg = <0x204>; + }; + + clkuart0: uart0 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <24>; + }; + + clkuart1: uart1 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <25>; + }; + + clkuart2: uart2 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <26>; + }; + + clkuart3: uart3 { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&ref24>; + enable-reg = <0x254>; + enable-bit = <27>; + }; + + clkpwm: pwm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x350>; + enable-reg = <0x250>; + enable-bit = <17>; + }; + + clksdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x330>; + divisor-mask = <0x3f>; + enable-reg = <0x250>; + enable-bit = <0>; + }; + }; + }; + + fb@d8051700 { + compatible = "wm,wm8505-fb"; + reg = <0xd8051700 0x200>; + display = <&display>; + default-mode = <&mode0>; + }; + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; + + pwm: pwm@d8220000 { + #pwm-cells = <3>; + compatible = "via,vt8500-pwm"; + reg = <0xd8220000 0x100>; + clocks = <&clkpwm>; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <26>; + }; + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <26>; + }; + + uhci@d8008d00 { + compatible = "platform-uhci"; + reg = <0xd8008d00 0x200>; + interrupts = <26>; + }; + + uart0: uart@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&clkuart0>; + }; + + uart1: uart@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&clkuart1>; + }; + + uart2: uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&clkuart2>; + }; + + uart3: uart@d82c0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82c0000 0x1040>; + interrupts = <50>; + clocks = <&clkuart3>; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + + sdhc@d800a000 { + compatible = "wm,wm8505-sdhc"; + reg = <0xd800a000 0x1000>; + interrupts = <20 21>; + clocks = <&clksdhc>; + bus-width = <4>; + sdon-inverted; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 401c126..5914b56 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -44,14 +44,14 @@ compatible = "xlnx,xuartps"; reg = <0xE0000000 0x1000>; interrupts = <0 27 4>; - clock = <50000000>; + clocks = <&uart_clk 0>; }; uart1: uart@e0001000 { compatible = "xlnx,xuartps"; reg = <0xE0001000 0x1000>; interrupts = <0 50 4>; - clock = <50000000>; + clocks = <&uart_clk 1>; }; slcr: slcr@f8000000 { diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 45ceeb0..9353184 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,26 +1,3 @@ -config ARM_GIC - bool - select IRQ_DOMAIN - select MULTI_IRQ_HANDLER - -config GIC_NON_BANKED - bool - -config ARM_VIC - bool - select IRQ_DOMAIN - select MULTI_IRQ_HANDLER - -config ARM_VIC_NR - int - default 4 if ARCH_S5PV210 - default 3 if ARCH_S5PC100 - default 2 - depends on ARM_VIC - help - The maximum number of VICs available in the system, for - power management. - config ICST bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index e8a4e58..dc8dd0d 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -2,8 +2,6 @@ # Makefile for the linux kernel. # -obj-$(CONFIG_ARM_GIC) += gic.o -obj-$(CONFIG_ARM_VIC) += vic.o obj-$(CONFIG_ICST) += icst.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c deleted file mode 100644 index 87dfa90..0000000 --- a/arch/arm/common/gic.c +++ /dev/null @@ -1,832 +0,0 @@ -/* - * linux/arch/arm/common/gic.c - * - * Copyright (C) 2002 ARM Limited, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Interrupt architecture for the GIC: - * - * o There is one Interrupt Distributor, which receives interrupts - * from system devices and sends them to the Interrupt Controllers. - * - * o There is one CPU Interface per CPU, which sends interrupts sent - * by the Distributor, and interrupts generated locally, to the - * associated CPU. The base address of the CPU interface is usually - * aliased so that the same address points to different chips depending - * on the CPU it is accessed from. - * - * Note that IRQs 0-31 are special - they are local to each CPU. - * As such, the enable set/clear, pending set/clear and active bit - * registers are banked per-cpu for these sources. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/module.h> -#include <linux/list.h> -#include <linux/smp.h> -#include <linux/cpu_pm.h> -#include <linux/cpumask.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/irqdomain.h> -#include <linux/interrupt.h> -#include <linux/percpu.h> -#include <linux/slab.h> - -#include <asm/irq.h> -#include <asm/exception.h> -#include <asm/smp_plat.h> -#include <asm/mach/irq.h> -#include <asm/hardware/gic.h> - -union gic_base { - void __iomem *common_base; - void __percpu __iomem **percpu_base; -}; - -struct gic_chip_data { - union gic_base dist_base; - union gic_base cpu_base; -#ifdef CONFIG_CPU_PM - u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; - u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; - u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; - u32 __percpu *saved_ppi_enable; - u32 __percpu *saved_ppi_conf; -#endif - struct irq_domain *domain; - unsigned int gic_irqs; -#ifdef CONFIG_GIC_NON_BANKED - void __iomem *(*get_base)(union gic_base *); -#endif -}; - -static DEFINE_RAW_SPINLOCK(irq_controller_lock); - -/* - * The GIC mapping of CPU interfaces does not necessarily match - * the logical CPU numbering. Let's use a mapping as returned - * by the GIC itself. - */ -#define NR_GIC_CPU_IF 8 -static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly; - -/* - * Supported arch specific GIC irq extension. - * Default make them NULL. - */ -struct irq_chip gic_arch_extn = { - .irq_eoi = NULL, - .irq_mask = NULL, - .irq_unmask = NULL, - .irq_retrigger = NULL, - .irq_set_type = NULL, - .irq_set_wake = NULL, -}; - -#ifndef MAX_GIC_NR -#define MAX_GIC_NR 1 -#endif - -static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly; - -#ifdef CONFIG_GIC_NON_BANKED -static void __iomem *gic_get_percpu_base(union gic_base *base) -{ - return *__this_cpu_ptr(base->percpu_base); -} - -static void __iomem *gic_get_common_base(union gic_base *base) -{ - return base->common_base; -} - -static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data) -{ - return data->get_base(&data->dist_base); -} - -static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data) -{ - return data->get_base(&data->cpu_base); -} - -static inline void gic_set_base_accessor(struct gic_chip_data *data, - void __iomem *(*f)(union gic_base *)) -{ - data->get_base = f; -} -#else -#define gic_data_dist_base(d) ((d)->dist_base.common_base) -#define gic_data_cpu_base(d) ((d)->cpu_base.common_base) -#define gic_set_base_accessor(d,f) -#endif - -static inline void __iomem *gic_dist_base(struct irq_data *d) -{ - struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - return gic_data_dist_base(gic_data); -} - -static inline void __iomem *gic_cpu_base(struct irq_data *d) -{ - struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); - return gic_data_cpu_base(gic_data); -} - -static inline unsigned int gic_irq(struct irq_data *d) -{ - return d->hwirq; -} - -/* - * Routines to acknowledge, disable and enable interrupts - */ -static void gic_mask_irq(struct irq_data *d) -{ - u32 mask = 1 << (gic_irq(d) % 32); - - raw_spin_lock(&irq_controller_lock); - writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4); - if (gic_arch_extn.irq_mask) - gic_arch_extn.irq_mask(d); - raw_spin_unlock(&irq_controller_lock); -} - -static void gic_unmask_irq(struct irq_data *d) -{ - u32 mask = 1 << (gic_irq(d) % 32); - - raw_spin_lock(&irq_controller_lock); - if (gic_arch_extn.irq_unmask) - gic_arch_extn.irq_unmask(d); - writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4); - raw_spin_unlock(&irq_controller_lock); -} - -static void gic_eoi_irq(struct irq_data *d) -{ - if (gic_arch_extn.irq_eoi) { - raw_spin_lock(&irq_controller_lock); - gic_arch_extn.irq_eoi(d); - raw_spin_unlock(&irq_controller_lock); - } - - writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI); -} - -static int gic_set_type(struct irq_data *d, unsigned int type) -{ - void __iomem *base = gic_dist_base(d); - unsigned int gicirq = gic_irq(d); - u32 enablemask = 1 << (gicirq % 32); - u32 enableoff = (gicirq / 32) * 4; - u32 confmask = 0x2 << ((gicirq % 16) * 2); - u32 confoff = (gicirq / 16) * 4; - bool enabled = false; - u32 val; - - /* Interrupt configuration for SGIs can't be changed */ - if (gicirq < 16) - return -EINVAL; - - if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) - return -EINVAL; - - raw_spin_lock(&irq_controller_lock); - - if (gic_arch_extn.irq_set_type) - gic_arch_extn.irq_set_type(d, type); - - val = readl_relaxed(base + GIC_DIST_CONFIG + confoff); - if (type == IRQ_TYPE_LEVEL_HIGH) - val &= ~confmask; - else if (type == IRQ_TYPE_EDGE_RISING) - val |= confmask; - - /* - * As recommended by the spec, disable the interrupt before changing - * the configuration - */ - if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) { - writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff); - enabled = true; - } - - writel_relaxed(val, base + GIC_DIST_CONFIG + confoff); - - if (enabled) - writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff); - - raw_spin_unlock(&irq_controller_lock); - - return 0; -} - -static int gic_retrigger(struct irq_data *d) -{ - if (gic_arch_extn.irq_retrigger) - return gic_arch_extn.irq_retrigger(d); - - return -ENXIO; -} - -#ifdef CONFIG_SMP -static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, - bool force) -{ - void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3); - unsigned int shift = (gic_irq(d) % 4) * 8; - unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask); - u32 val, mask, bit; - - if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) - return -EINVAL; - - mask = 0xff << shift; - bit = gic_cpu_map[cpu] << shift; - - raw_spin_lock(&irq_controller_lock); - val = readl_relaxed(reg) & ~mask; - writel_relaxed(val | bit, reg); - raw_spin_unlock(&irq_controller_lock); - - return IRQ_SET_MASK_OK; -} -#endif - -#ifdef CONFIG_PM -static int gic_set_wake(struct irq_data *d, unsigned int on) -{ - int ret = -ENXIO; - - if (gic_arch_extn.irq_set_wake) - ret = gic_arch_extn.irq_set_wake(d, on); - - return ret; -} - -#else -#define gic_set_wake NULL -#endif - -asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) -{ - u32 irqstat, irqnr; - struct gic_chip_data *gic = &gic_data[0]; - void __iomem *cpu_base = gic_data_cpu_base(gic); - - do { - irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK); - irqnr = irqstat & ~0x1c00; - - if (likely(irqnr > 15 && irqnr < 1021)) { - irqnr = irq_find_mapping(gic->domain, irqnr); - handle_IRQ(irqnr, regs); - continue; - } - if (irqnr < 16) { - writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI); -#ifdef CONFIG_SMP - handle_IPI(irqnr, regs); -#endif - continue; - } - break; - } while (1); -} - -static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) -{ - struct gic_chip_data *chip_data = irq_get_handler_data(irq); - struct irq_chip *chip = irq_get_chip(irq); - unsigned int cascade_irq, gic_irq; - unsigned long status; - - chained_irq_enter(chip, desc); - - raw_spin_lock(&irq_controller_lock); - status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK); - raw_spin_unlock(&irq_controller_lock); - - gic_irq = (status & 0x3ff); - if (gic_irq == 1023) - goto out; - - cascade_irq = irq_find_mapping(chip_data->domain, gic_irq); - if (unlikely(gic_irq < 32 || gic_irq > 1020)) - do_bad_IRQ(cascade_irq, desc); - else - generic_handle_irq(cascade_irq); - - out: - chained_irq_exit(chip, desc); -} - -static struct irq_chip gic_chip = { - .name = "GIC", - .irq_mask = gic_mask_irq, - .irq_unmask = gic_unmask_irq, - .irq_eoi = gic_eoi_irq, - .irq_set_type = gic_set_type, - .irq_retrigger = gic_retrigger, -#ifdef CONFIG_SMP - .irq_set_affinity = gic_set_affinity, -#endif - .irq_set_wake = gic_set_wake, -}; - -void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) -{ - if (gic_nr >= MAX_GIC_NR) - BUG(); - if (irq_set_handler_data(irq, &gic_data[gic_nr]) != 0) - BUG(); - irq_set_chained_handler(irq, gic_handle_cascade_irq); -} - -static u8 gic_get_cpumask(struct gic_chip_data *gic) -{ - void __iomem *base = gic_data_dist_base(gic); - u32 mask, i; - - for (i = mask = 0; i < 32; i += 4) { - mask = readl_relaxed(base + GIC_DIST_TARGET + i); - mask |= mask >> 16; - mask |= mask >> 8; - if (mask) - break; - } - - if (!mask) - pr_crit("GIC CPU mask not found - kernel will fail to boot.\n"); - - return mask; -} - -static void __init gic_dist_init(struct gic_chip_data *gic) -{ - unsigned int i; - u32 cpumask; - unsigned int gic_irqs = gic->gic_irqs; - void __iomem *base = gic_data_dist_base(gic); - - writel_relaxed(0, base + GIC_DIST_CTRL); - - /* - * Set all global interrupts to be level triggered, active low. - */ - for (i = 32; i < gic_irqs; i += 16) - writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16); - - /* - * Set all global interrupts to this CPU only. - */ - cpumask = gic_get_cpumask(gic); - cpumask |= cpumask << 8; - cpumask |= cpumask << 16; - for (i = 32; i < gic_irqs; i += 4) - writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); - - /* - * Set priority on all global interrupts. - */ - for (i = 32; i < gic_irqs; i += 4) - writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); - - /* - * Disable all interrupts. Leave the PPI and SGIs alone - * as these enables are banked registers. - */ - for (i = 32; i < gic_irqs; i += 32) - writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); - - writel_relaxed(1, base + GIC_DIST_CTRL); -} - -static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) -{ - void __iomem *dist_base = gic_data_dist_base(gic); - void __iomem *base = gic_data_cpu_base(gic); - unsigned int cpu_mask, cpu = smp_processor_id(); - int i; - - /* - * Get what the GIC says our CPU mask is. - */ - BUG_ON(cpu >= NR_GIC_CPU_IF); - cpu_mask = gic_get_cpumask(gic); - gic_cpu_map[cpu] = cpu_mask; - - /* - * Clear our mask from the other map entries in case they're - * still undefined. - */ - for (i = 0; i < NR_GIC_CPU_IF; i++) - if (i != cpu) - gic_cpu_map[i] &= ~cpu_mask; - - /* - * Deal with the banked PPI and SGI interrupts - disable all - * PPI interrupts, ensure all SGI interrupts are enabled. - */ - writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); - writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); - - /* - * Set priority on PPI and SGI interrupts - */ - for (i = 0; i < 32; i += 4) - writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); - - writel_relaxed(0xf0, base + GIC_CPU_PRIMASK); - writel_relaxed(1, base + GIC_CPU_CTRL); -} - -#ifdef CONFIG_CPU_PM -/* - * Saves the GIC distributor registers during suspend or idle. Must be called - * with interrupts disabled but before powering down the GIC. After calling - * this function, no interrupts will be delivered by the GIC, and another - * platform-specific wakeup source must be enabled. - */ -static void gic_dist_save(unsigned int gic_nr) -{ - unsigned int gic_irqs; - void __iomem *dist_base; - int i; - - if (gic_nr >= MAX_GIC_NR) - BUG(); - - gic_irqs = gic_data[gic_nr].gic_irqs; - dist_base = gic_data_dist_base(&gic_data[gic_nr]); - - if (!dist_base) - return; - - for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++) - gic_data[gic_nr].saved_spi_conf[i] = - readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4); - - for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) - gic_data[gic_nr].saved_spi_target[i] = - readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4); - - for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) - gic_data[gic_nr].saved_spi_enable[i] = - readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); -} - -/* - * Restores the GIC distributor registers during resume or when coming out of - * idle. Must be called before enabling interrupts. If a level interrupt - * that occured while the GIC was suspended is still present, it will be - * handled normally, but any edge interrupts that occured will not be seen by - * the GIC and need to be handled by the platform-specific wakeup source. - */ -static void gic_dist_restore(unsigned int gic_nr) -{ - unsigned int gic_irqs; - unsigned int i; - void __iomem *dist_base; - - if (gic_nr >= MAX_GIC_NR) - BUG(); - - gic_irqs = gic_data[gic_nr].gic_irqs; - dist_base = gic_data_dist_base(&gic_data[gic_nr]); - - if (!dist_base) - return; - - writel_relaxed(0, dist_base + GIC_DIST_CTRL); - - for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++) - writel_relaxed(gic_data[gic_nr].saved_spi_conf[i], - dist_base + GIC_DIST_CONFIG + i * 4); - - for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) - writel_relaxed(0xa0a0a0a0, - dist_base + GIC_DIST_PRI + i * 4); - - for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) - writel_relaxed(gic_data[gic_nr].saved_spi_target[i], - dist_base + GIC_DIST_TARGET + i * 4); - - for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) - writel_relaxed(gic_data[gic_nr].saved_spi_enable[i], - dist_base + GIC_DIST_ENABLE_SET + i * 4); - - writel_relaxed(1, dist_base + GIC_DIST_CTRL); -} - -static void gic_cpu_save(unsigned int gic_nr) -{ - int i; - u32 *ptr; - void __iomem *dist_base; - void __iomem *cpu_base; - - if (gic_nr >= MAX_GIC_NR) - BUG(); - - dist_base = gic_data_dist_base(&gic_data[gic_nr]); - cpu_base = gic_data_cpu_base(&gic_data[gic_nr]); - - if (!dist_base || !cpu_base) - return; - - ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable); - for (i = 0; i < DIV_ROUND_UP(32, 32); i++) - ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); - - ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); - for (i = 0; i < DIV_ROUND_UP(32, 16); i++) - ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4); - -} - -static void gic_cpu_restore(unsigned int gic_nr) -{ - int i; - u32 *ptr; - void __iomem *dist_base; - void __iomem *cpu_base; - - if (gic_nr >= MAX_GIC_NR) - BUG(); - - dist_base = gic_data_dist_base(&gic_data[gic_nr]); - cpu_base = gic_data_cpu_base(&gic_data[gic_nr]); - - if (!dist_base || !cpu_base) - return; - - ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable); - for (i = 0; i < DIV_ROUND_UP(32, 32); i++) - writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4); - - ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); - for (i = 0; i < DIV_ROUND_UP(32, 16); i++) - writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4); - - for (i = 0; i < DIV_ROUND_UP(32, 4); i++) - writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4); - - writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK); - writel_relaxed(1, cpu_base + GIC_CPU_CTRL); -} - -static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v) -{ - int i; - - for (i = 0; i < MAX_GIC_NR; i++) { -#ifdef CONFIG_GIC_NON_BANKED - /* Skip over unused GICs */ - if (!gic_data[i].get_base) - continue; -#endif - switch (cmd) { - case CPU_PM_ENTER: - gic_cpu_save(i); - break; - case CPU_PM_ENTER_FAILED: - case CPU_PM_EXIT: - gic_cpu_restore(i); - break; - case CPU_CLUSTER_PM_ENTER: - gic_dist_save(i); - break; - case CPU_CLUSTER_PM_ENTER_FAILED: - case CPU_CLUSTER_PM_EXIT: - gic_dist_restore(i); - break; - } - } - - return NOTIFY_OK; -} - -static struct notifier_block gic_notifier_block = { - .notifier_call = gic_notifier, -}; - -static void __init gic_pm_init(struct gic_chip_data *gic) -{ - gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4, - sizeof(u32)); - BUG_ON(!gic->saved_ppi_enable); - - gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4, - sizeof(u32)); - BUG_ON(!gic->saved_ppi_conf); - - if (gic == &gic_data[0]) - cpu_pm_register_notifier(&gic_notifier_block); -} -#else -static void __init gic_pm_init(struct gic_chip_data *gic) -{ -} -#endif - -static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - if (hw < 32) { - irq_set_percpu_devid(irq); - irq_set_chip_and_handler(irq, &gic_chip, - handle_percpu_devid_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN); - } else { - irq_set_chip_and_handler(irq, &gic_chip, - handle_fasteoi_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - irq_set_chip_data(irq, d->host_data); - return 0; -} - -static int gic_irq_domain_xlate(struct irq_domain *d, - struct device_node *controller, - const u32 *intspec, unsigned int intsize, - unsigned long *out_hwirq, unsigned int *out_type) -{ - if (d->of_node != controller) - return -EINVAL; - if (intsize < 3) - return -EINVAL; - - /* Get the interrupt number and add 16 to skip over SGIs */ - *out_hwirq = intspec[1] + 16; - - /* For SPIs, we need to add 16 more to get the GIC irq ID number */ - if (!intspec[0]) - *out_hwirq += 16; - - *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK; - return 0; -} - -const struct irq_domain_ops gic_irq_domain_ops = { - .map = gic_irq_domain_map, - .xlate = gic_irq_domain_xlate, -}; - -void __init gic_init_bases(unsigned int gic_nr, int irq_start, - void __iomem *dist_base, void __iomem *cpu_base, - u32 percpu_offset, struct device_node *node) -{ - irq_hw_number_t hwirq_base; - struct gic_chip_data *gic; - int gic_irqs, irq_base, i; - - BUG_ON(gic_nr >= MAX_GIC_NR); - - gic = &gic_data[gic_nr]; -#ifdef CONFIG_GIC_NON_BANKED - if (percpu_offset) { /* Frankein-GIC without banked registers... */ - unsigned int cpu; - - gic->dist_base.percpu_base = alloc_percpu(void __iomem *); - gic->cpu_base.percpu_base = alloc_percpu(void __iomem *); - if (WARN_ON(!gic->dist_base.percpu_base || - !gic->cpu_base.percpu_base)) { - free_percpu(gic->dist_base.percpu_base); - free_percpu(gic->cpu_base.percpu_base); - return; - } - - for_each_possible_cpu(cpu) { - unsigned long offset = percpu_offset * cpu_logical_map(cpu); - *per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset; - *per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset; - } - - gic_set_base_accessor(gic, gic_get_percpu_base); - } else -#endif - { /* Normal, sane GIC... */ - WARN(percpu_offset, - "GIC_NON_BANKED not enabled, ignoring %08x offset!", - percpu_offset); - gic->dist_base.common_base = dist_base; - gic->cpu_base.common_base = cpu_base; - gic_set_base_accessor(gic, gic_get_common_base); - } - - /* - * Initialize the CPU interface map to all CPUs. - * It will be refined as each CPU probes its ID. - */ - for (i = 0; i < NR_GIC_CPU_IF; i++) - gic_cpu_map[i] = 0xff; - - /* - * For primary GICs, skip over SGIs. - * For secondary GICs, skip over PPIs, too. - */ - if (gic_nr == 0 && (irq_start & 31) > 0) { - hwirq_base = 16; - if (irq_start != -1) - irq_start = (irq_start & ~31) + 16; - } else { - hwirq_base = 32; - } - - /* - * Find out how many interrupts are supported. - * The GIC only supports up to 1020 interrupt sources. - */ - gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f; - gic_irqs = (gic_irqs + 1) * 32; - if (gic_irqs > 1020) - gic_irqs = 1020; - gic->gic_irqs = gic_irqs; - - gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */ - irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id()); - if (IS_ERR_VALUE(irq_base)) { - WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n", - irq_start); - irq_base = irq_start; - } - gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base, - hwirq_base, &gic_irq_domain_ops, gic); - if (WARN_ON(!gic->domain)) - return; - - gic_chip.flags |= gic_arch_extn.flags; - gic_dist_init(gic); - gic_cpu_init(gic); - gic_pm_init(gic); -} - -void __cpuinit gic_secondary_init(unsigned int gic_nr) -{ - BUG_ON(gic_nr >= MAX_GIC_NR); - - gic_cpu_init(&gic_data[gic_nr]); -} - -#ifdef CONFIG_SMP -void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) -{ - int cpu; - unsigned long map = 0; - - /* Convert our logical CPU mask into a physical one. */ - for_each_cpu(cpu, mask) - map |= gic_cpu_map[cpu]; - - /* - * Ensure that stores to Normal memory are visible to the - * other CPUs before issuing the IPI. - */ - dsb(); - - /* this always happens on GIC0 */ - writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); -} -#endif - -#ifdef CONFIG_OF -static int gic_cnt __initdata = 0; - -int __init gic_of_init(struct device_node *node, struct device_node *parent) -{ - void __iomem *cpu_base; - void __iomem *dist_base; - u32 percpu_offset; - int irq; - - if (WARN_ON(!node)) - return -ENODEV; - - dist_base = of_iomap(node, 0); - WARN(!dist_base, "unable to map gic dist registers\n"); - - cpu_base = of_iomap(node, 1); - WARN(!cpu_base, "unable to map gic cpu registers\n"); - - if (of_property_read_u32(node, "cpu-offset", &percpu_offset)) - percpu_offset = 0; - - gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node); - - if (parent) { - irq = irq_of_parse_and_map(node, 0); - gic_cascade_irq(gic_cnt, irq); - } - gic_cnt++; - return 0; -} -#endif diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c deleted file mode 100644 index 8f324b9..0000000 --- a/arch/arm/common/vic.c +++ /dev/null @@ -1,464 +0,0 @@ -/* - * linux/arch/arm/common/vic.c - * - * Copyright (C) 1999 - 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/export.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/io.h> -#include <linux/irqdomain.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/syscore_ops.h> -#include <linux/device.h> -#include <linux/amba/bus.h> - -#include <asm/exception.h> -#include <asm/mach/irq.h> -#include <asm/hardware/vic.h> - -/** - * struct vic_device - VIC PM device - * @irq: The IRQ number for the base of the VIC. - * @base: The register base for the VIC. - * @valid_sources: A bitmask of valid interrupts - * @resume_sources: A bitmask of interrupts for resume. - * @resume_irqs: The IRQs enabled for resume. - * @int_select: Save for VIC_INT_SELECT. - * @int_enable: Save for VIC_INT_ENABLE. - * @soft_int: Save for VIC_INT_SOFT. - * @protect: Save for VIC_PROTECT. - * @domain: The IRQ domain for the VIC. - */ -struct vic_device { - void __iomem *base; - int irq; - u32 valid_sources; - u32 resume_sources; - u32 resume_irqs; - u32 int_select; - u32 int_enable; - u32 soft_int; - u32 protect; - struct irq_domain *domain; -}; - -/* we cannot allocate memory when VICs are initially registered */ -static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; - -static int vic_id; - -/** - * vic_init2 - common initialisation code - * @base: Base of the VIC. - * - * Common initialisation code for registration - * and resume. -*/ -static void vic_init2(void __iomem *base) -{ - int i; - - for (i = 0; i < 16; i++) { - void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); - writel(VIC_VECT_CNTL_ENABLE | i, reg); - } - - writel(32, base + VIC_PL190_DEF_VECT_ADDR); -} - -#ifdef CONFIG_PM -static void resume_one_vic(struct vic_device *vic) -{ - void __iomem *base = vic->base; - - printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base); - - /* re-initialise static settings */ - vic_init2(base); - - writel(vic->int_select, base + VIC_INT_SELECT); - writel(vic->protect, base + VIC_PROTECT); - - /* set the enabled ints and then clear the non-enabled */ - writel(vic->int_enable, base + VIC_INT_ENABLE); - writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR); - - /* and the same for the soft-int register */ - - writel(vic->soft_int, base + VIC_INT_SOFT); - writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR); -} - -static void vic_resume(void) -{ - int id; - - for (id = vic_id - 1; id >= 0; id--) - resume_one_vic(vic_devices + id); -} - -static void suspend_one_vic(struct vic_device *vic) -{ - void __iomem *base = vic->base; - - printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base); - - vic->int_select = readl(base + VIC_INT_SELECT); - vic->int_enable = readl(base + VIC_INT_ENABLE); - vic->soft_int = readl(base + VIC_INT_SOFT); - vic->protect = readl(base + VIC_PROTECT); - - /* set the interrupts (if any) that are used for - * resuming the system */ - - writel(vic->resume_irqs, base + VIC_INT_ENABLE); - writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR); -} - -static int vic_suspend(void) -{ - int id; - - for (id = 0; id < vic_id; id++) - suspend_one_vic(vic_devices + id); - - return 0; -} - -struct syscore_ops vic_syscore_ops = { - .suspend = vic_suspend, - .resume = vic_resume, -}; - -/** - * vic_pm_init - initicall to register VIC pm - * - * This is called via late_initcall() to register - * the resources for the VICs due to the early - * nature of the VIC's registration. -*/ -static int __init vic_pm_init(void) -{ - if (vic_id > 0) - register_syscore_ops(&vic_syscore_ops); - - return 0; -} -late_initcall(vic_pm_init); -#endif /* CONFIG_PM */ - -static struct irq_chip vic_chip; - -static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hwirq) -{ - struct vic_device *v = d->host_data; - - /* Skip invalid IRQs, only register handlers for the real ones */ - if (!(v->valid_sources & (1 << hwirq))) - return -ENOTSUPP; - irq_set_chip_and_handler(irq, &vic_chip, handle_level_irq); - irq_set_chip_data(irq, v->base); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - return 0; -} - -static struct irq_domain_ops vic_irqdomain_ops = { - .map = vic_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -/** - * vic_register() - Register a VIC. - * @base: The base address of the VIC. - * @irq: The base IRQ for the VIC. - * @valid_sources: bitmask of valid interrupts - * @resume_sources: bitmask of interrupts allowed for resume sources. - * @node: The device tree node associated with the VIC. - * - * Register the VIC with the system device tree so that it can be notified - * of suspend and resume requests and ensure that the correct actions are - * taken to re-instate the settings on resume. - * - * This also configures the IRQ domain for the VIC. - */ -static void __init vic_register(void __iomem *base, unsigned int irq, - u32 valid_sources, u32 resume_sources, - struct device_node *node) -{ - struct vic_device *v; - int i; - - if (vic_id >= ARRAY_SIZE(vic_devices)) { - printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); - return; - } - - v = &vic_devices[vic_id]; - v->base = base; - v->valid_sources = valid_sources; - v->resume_sources = resume_sources; - v->irq = irq; - vic_id++; - v->domain = irq_domain_add_simple(node, fls(valid_sources), irq, - &vic_irqdomain_ops, v); - /* create an IRQ mapping for each valid IRQ */ - for (i = 0; i < fls(valid_sources); i++) - if (valid_sources & (1 << i)) - irq_create_mapping(v->domain, i); -} - -static void vic_ack_irq(struct irq_data *d) -{ - void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->hwirq; - writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); - /* moreover, clear the soft-triggered, in case it was the reason */ - writel(1 << irq, base + VIC_INT_SOFT_CLEAR); -} - -static void vic_mask_irq(struct irq_data *d) -{ - void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->hwirq; - writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); -} - -static void vic_unmask_irq(struct irq_data *d) -{ - void __iomem *base = irq_data_get_irq_chip_data(d); - unsigned int irq = d->hwirq; - writel(1 << irq, base + VIC_INT_ENABLE); -} - -#if defined(CONFIG_PM) -static struct vic_device *vic_from_irq(unsigned int irq) -{ - struct vic_device *v = vic_devices; - unsigned int base_irq = irq & ~31; - int id; - - for (id = 0; id < vic_id; id++, v++) { - if (v->irq == base_irq) - return v; - } - - return NULL; -} - -static int vic_set_wake(struct irq_data *d, unsigned int on) -{ - struct vic_device *v = vic_from_irq(d->irq); - unsigned int off = d->hwirq; - u32 bit = 1 << off; - - if (!v) - return -EINVAL; - - if (!(bit & v->resume_sources)) - return -EINVAL; - - if (on) - v->resume_irqs |= bit; - else - v->resume_irqs &= ~bit; - - return 0; -} -#else -#define vic_set_wake NULL -#endif /* CONFIG_PM */ - -static struct irq_chip vic_chip = { - .name = "VIC", - .irq_ack = vic_ack_irq, - .irq_mask = vic_mask_irq, - .irq_unmask = vic_unmask_irq, - .irq_set_wake = vic_set_wake, -}; - -static void __init vic_disable(void __iomem *base) -{ - writel(0, base + VIC_INT_SELECT); - writel(0, base + VIC_INT_ENABLE); - writel(~0, base + VIC_INT_ENABLE_CLEAR); - writel(0, base + VIC_ITCR); - writel(~0, base + VIC_INT_SOFT_CLEAR); -} - -static void __init vic_clear_interrupts(void __iomem *base) -{ - unsigned int i; - - writel(0, base + VIC_PL190_VECT_ADDR); - for (i = 0; i < 19; i++) { - unsigned int value; - - value = readl(base + VIC_PL190_VECT_ADDR); - writel(value, base + VIC_PL190_VECT_ADDR); - } -} - -/* - * The PL190 cell from ARM has been modified by ST to handle 64 interrupts. - * The original cell has 32 interrupts, while the modified one has 64, - * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case - * the probe function is called twice, with base set to offset 000 - * and 020 within the page. We call this "second block". - */ -static void __init vic_init_st(void __iomem *base, unsigned int irq_start, - u32 vic_sources, struct device_node *node) -{ - unsigned int i; - int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0; - - /* Disable all interrupts initially. */ - vic_disable(base); - - /* - * Make sure we clear all existing interrupts. The vector registers - * in this cell are after the second block of general registers, - * so we can address them using standard offsets, but only from - * the second base address, which is 0x20 in the page - */ - if (vic_2nd_block) { - vic_clear_interrupts(base); - - /* ST has 16 vectors as well, but we don't enable them by now */ - for (i = 0; i < 16; i++) { - void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); - writel(0, reg); - } - - writel(32, base + VIC_PL190_DEF_VECT_ADDR); - } - - vic_register(base, irq_start, vic_sources, 0, node); -} - -void __init __vic_init(void __iomem *base, int irq_start, - u32 vic_sources, u32 resume_sources, - struct device_node *node) -{ - unsigned int i; - u32 cellid = 0; - enum amba_vendor vendor; - - /* Identify which VIC cell this one is, by reading the ID */ - for (i = 0; i < 4; i++) { - void __iomem *addr; - addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); - cellid |= (readl(addr) & 0xff) << (8 * i); - } - vendor = (cellid >> 12) & 0xff; - printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n", - base, cellid, vendor); - - switch(vendor) { - case AMBA_VENDOR_ST: - vic_init_st(base, irq_start, vic_sources, node); - return; - default: - printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n"); - /* fall through */ - case AMBA_VENDOR_ARM: - break; - } - - /* Disable all interrupts initially. */ - vic_disable(base); - - /* Make sure we clear all existing interrupts */ - vic_clear_interrupts(base); - - vic_init2(base); - - vic_register(base, irq_start, vic_sources, resume_sources, node); -} - -/** - * vic_init() - initialise a vectored interrupt controller - * @base: iomem base address - * @irq_start: starting interrupt number, must be muliple of 32 - * @vic_sources: bitmask of interrupt sources to allow - * @resume_sources: bitmask of interrupt sources to allow for resume - */ -void __init vic_init(void __iomem *base, unsigned int irq_start, - u32 vic_sources, u32 resume_sources) -{ - __vic_init(base, irq_start, vic_sources, resume_sources, NULL); -} - -#ifdef CONFIG_OF -int __init vic_of_init(struct device_node *node, struct device_node *parent) -{ - void __iomem *regs; - - if (WARN(parent, "non-root VICs are not supported")) - return -EINVAL; - - regs = of_iomap(node, 0); - if (WARN_ON(!regs)) - return -EIO; - - /* - * Passing 0 as first IRQ makes the simple domain allocate descriptors - */ - __vic_init(regs, 0, ~0, ~0, node); - - return 0; -} -#endif /* CONFIG OF */ - -/* - * Handle each interrupt in a single VIC. Returns non-zero if we've - * handled at least one interrupt. This reads the status register - * before handling each interrupt, which is necessary given that - * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. - */ -static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) -{ - u32 stat, irq; - int handled = 0; - - while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) { - irq = ffs(stat) - 1; - handle_IRQ(irq_find_mapping(vic->domain, irq), regs); - handled = 1; - } - - return handled; -} - -/* - * Keep iterating over all registered VIC's until there are no pending - * interrupts. - */ -asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs) -{ - int i, handled; - - do { - for (i = 0, handled = 0; i < vic_id; ++i) - handled |= handle_one_vic(&vic_devices[i], regs); - } while (handled); -} diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 2e1a825..0b98100 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -34,12 +34,11 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" -CONFIG_CMDLINE_FORCE=y +CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_SUSPEND is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -91,14 +90,11 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y -# CONFIG_RC_CORE is not set -# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set -# CONFIG_V4L_USB_DRIVERS is not set +CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_MT9T112=y CONFIG_VIDEO_SH_MOBILE_CEU=y -# CONFIG_RADIO_ADAPTERS is not set CONFIG_FB=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SH_MOBILE_HDMI=y diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index c5212f4..36fed66b 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -18,7 +18,6 @@ CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9263=y CONFIG_MACH_AT91SAM9263EK=y CONFIG_MACH_USB_A9263=y -CONFIG_MACH_NEOCORE926=y CONFIG_MTD_AT91_DATAFLASH_CARD=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 74e27f0..af472e4 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -1,11 +1,10 @@ -CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y @@ -30,13 +29,10 @@ CONFIG_EMBEDDED=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y -# CONFIG_BLOCK is not set CONFIG_ARCH_BCM2835=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_COMPACTION=y CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_CLEANCACHE=y CONFIG_SECCOMP=y CONFIG_CC_STACKPROTECTOR=y @@ -45,6 +41,11 @@ CONFIG_CRASH_DUMP=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETWORK_SECMARK=y +# CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set @@ -53,20 +54,42 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set -# CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_TTY_PRINTK=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_BCM2835=y +CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set # CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_BCM2835=y # CONFIG_IOMMU_SUPPORT is not set -# CONFIG_FILE_LOCKING is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_FANOTIFY=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFSD=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index f292239..9aaad36 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -36,6 +36,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=m CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_IDLE=y +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -45,6 +46,8 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_LRO is not set CONFIG_NETFILTER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_RAM=y @@ -81,6 +84,7 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y +CONFIG_PINCTRL_SINGLE=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_REGULATOR=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 4ea7c95..3edc78a 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -33,6 +33,7 @@ CONFIG_AEABI=y CONFIG_LEDS=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -42,6 +43,8 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_LRO is not set CONFIG_NETFILTER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FW_LOADER is not set CONFIG_MTD=m CONFIG_MTD_PARTITIONS=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index ebbfb27..02c657a 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -61,6 +61,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set +CONFIG_NETFILTER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -127,6 +128,8 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX2=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_CODA=y CONFIG_FB=y CONFIG_FB_IMX=y CONFIG_BACKLIGHT_LCD_SUPPORT=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 6966713..e36b010 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -19,6 +19,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_ARCH_MXC=y CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_MULTI_V7=y +CONFIG_MACH_IMX31_DT=y CONFIG_MACH_MX31LILLY=y CONFIG_MACH_MX31LITE=y CONFIG_MACH_PCM037=y @@ -32,7 +33,6 @@ CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y -CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y @@ -59,6 +59,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_IPV6=y +CONFIG_NETFILTER=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -151,6 +152,7 @@ CONFIG_MFD_MC13XXX_I2C=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_DA9052=y +CONFIG_REGULATOR_ANATOP=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y @@ -159,6 +161,7 @@ CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y +CONFIG_DRM=y CONFIG_VIDEO_MX3=y CONFIG_FB=y CONFIG_LCD_PLATFORM=y @@ -197,9 +200,14 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y +CONFIG_RTC_DRV_SNVS=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y CONFIG_MXS_DMA=y +CONFIG_STAGING=y +CONFIG_DRM_IMX=y +CONFIG_DRM_IMX_IPUV3_CORE=y +CONFIG_DRM_IMX_IPUV3=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 93f3794..13482ea 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -56,6 +56,7 @@ CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_KIRKWOOD=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/arm/configs/kota2_defconfig b/arch/arm/configs/kota2_defconfig index fa83db1..57ad3d4 100644 --- a/arch/arm/configs/kota2_defconfig +++ b/arch/arm/configs/kota2_defconfig @@ -21,7 +21,7 @@ CONFIG_ARCH_SHMOBILE=y CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_ARCH_SH73A0=y CONFIG_MACH_KOTA2=y -CONFIG_MEMORY_SIZE=0x1e0000000 +CONFIG_MEMORY_SIZE=0x1e000000 # CONFIG_SH_TIMER_TMU is not set # CONFIG_SWP_EMULATE is not set CONFIG_CPU_BPREDICT_DISABLE=y diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig index 8c49df6..6c37f4a 100644 --- a/arch/arm/configs/kzm9d_defconfig +++ b/arch/arm/configs/kzm9d_defconfig @@ -32,11 +32,9 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y -CONFIG_CMDLINE="console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" -CONFIG_CMDLINE_FORCE=y CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_SUSPEND is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index afbae28..670c3b6 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -39,7 +39,7 @@ CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200" +CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y CONFIG_VFP=y CONFIG_NEON=y @@ -85,6 +85,8 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_SH_MOBILE=y CONFIG_GPIO_PCF857X=y # CONFIG_HWMON is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DUMMY=y CONFIG_FB=y CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig index 2098ce1..7594b3a 100644 --- a/arch/arm/configs/mackerel_defconfig +++ b/arch/arm/configs/mackerel_defconfig @@ -23,8 +23,9 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=15 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp memchunk.vpu=64m memchunk.veu0=8m memchunk.spu0=2m mem=240m" +CONFIG_ARM_APPENDED_DTB=y CONFIG_KEXEC=y +CONFIG_VFP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM=y CONFIG_PM_RUNTIME=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 728a43c..afb17d6 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -83,7 +83,6 @@ CONFIG_USB=y CONFIG_USB_RCAR_PHY=y CONFIG_MMC=y CONFIG_MMC_SDHI=y -CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 2eeff1e..e31d442 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -8,6 +8,7 @@ CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_SOCFPGA=y CONFIG_ARCH_SUNXI=y # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set +CONFIG_ARCH_ZYNQ=y CONFIG_ARM_ERRATA_754322=y CONFIG_SMP=y CONFIG_ARM_ARCH_TIMER=y @@ -39,7 +40,6 @@ CONFIG_I2C=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_SPI=y CONFIG_SPI_PL022=y -CONFIG_GPIOLIB=y CONFIG_FB=y CONFIG_FB_ARMCLCD=y CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index b5bc96c..cbd91bc 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -33,6 +33,8 @@ CONFIG_MVNETA=y CONFIG_MARVELL_PHY=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_MV64XXX=y CONFIG_SERIAL_8250_DW=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 7bf5351..fbbc5bb 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -1,5 +1,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y @@ -8,7 +10,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_PERF_EVENTS=y @@ -24,8 +25,6 @@ CONFIG_BLK_DEV_INTEGRITY=y CONFIG_ARCH_MXS=y CONFIG_MACH_MXS_DT=y # CONFIG_ARM_THUMB is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y CONFIG_AUTO_ZRELADDR=y @@ -46,25 +45,34 @@ CONFIG_SYN_COOKIES=y CONFIG_CAN=m CONFIG_CAN_RAW=m CONFIG_CAN_BCM=m -CONFIG_CAN_DEV=m CONFIG_CAN_FLEXCAN=m # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set -# CONFIG_BLK_DEV is not set CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_M25P80 +CONFIG_MTD_M25P80=y +# CONFIG_M25PXX_USE_FAST_READ is not set +CONFIG_MTD_SST25L=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_UBI=y +# CONFIG_BLK_DEV is not set +CONFIG_EEPROM_AT24=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_ENC28J60=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC95XX=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_SMSC_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_MICREL_PHY=y # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=m @@ -91,21 +99,6 @@ CONFIG_SPI_MXS=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_DISPLAY_SUPPORT=m -# CONFIG_HID_SUPPORT is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_JACK=y -CONFIG_SND_DRIVERS=y -CONFIG_SND_ARM=y -CONFIG_SND_SOC=y -CONFIG_SND_MXS_SOC=y -CONFIG_SND_SOC_MXS_SGTL5000=y -CONFIG_SND_SOC_I2C_AND_SPI=y -CONFIG_SND_SOC_SGTL5000=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y @@ -117,13 +110,16 @@ CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_MXS_SOC=y +CONFIG_SND_SOC_MXS_SGTL5000=y CONFIG_USB=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_STORAGE=y CONFIG_USB_MXS_PHY=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y CONFIG_MMC=y CONFIG_MMC_MXS=y CONFIG_NEW_LEDS=y @@ -147,16 +143,23 @@ CONFIG_COMMON_CLK_DEBUG=y CONFIG_IIO=y CONFIG_PWM=y CONFIG_PWM_MXS=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y CONFIG_CACHEFILES=m CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y @@ -170,17 +173,12 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_KERNEL=y CONFIG_LOCKUP_DETECTOR=y -CONFIG_DETECT_HUNG_TASK=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_STRICT_DEVMEM=y CONFIG_DEBUG_USER=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_CRC_ITU_T=m diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 82ce8d7..b16bae2 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -20,9 +20,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y +CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y +CONFIG_ARCH_VEXPRESS_CA9X4=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y @@ -52,6 +53,11 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_BT=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y @@ -64,6 +70,7 @@ CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_CMA=y CONFIG_CONNECTOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -83,6 +90,9 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_SENSORS_LIS3LV02D=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_LIS3_I2C=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -108,6 +118,7 @@ CONFIG_USB_KC2190=y CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_MATRIX=m CONFIG_KEYBOARD_TWL4030=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y @@ -121,6 +132,8 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y @@ -131,14 +144,17 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=y CONFIG_POWER_SUPPLY=y +CONFIG_SENSORS_LM75=m CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65910=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y @@ -150,6 +166,7 @@ CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m CONFIG_PANEL_GENERIC_DPI=m +CONFIG_PANEL_TFP410=m CONFIG_PANEL_SHARP_LS037V7DW01=m CONFIG_PANEL_NEC_NL8048HL11_01B=m CONFIG_PANEL_TAAL=m @@ -194,11 +211,23 @@ CONFIG_USB_ZERO=m CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y +CONFIG_MMC_ARMMMCI=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_OMAP=y CONFIG_DMADEVICES=y CONFIG_DMA_OMAP=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig index 6a936c7..002a1ce 100644 --- a/arch/arm/configs/prima2_defconfig +++ b/arch/arm/configs/prima2_defconfig @@ -11,6 +11,9 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_ARCH_SIRF=y +# CONFIG_SWP_EMULATE is not set +CONFIG_SMP=y +CONFIG_SCHED_MC=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_KEXEC=y diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 191118c..3bb7771 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -42,6 +42,14 @@ CONFIG_SMC91X=y # CONFIG_SERIO is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SPI=y +CONFIG_FB=y +CONFIG_MMP_DISP=y +CONFIG_MMP_DISP_CONTROLLER=y +CONFIG_MMP_SPI=y +CONFIG_MMP_PANEL_TPOHVGA=y +CONFIG_MMP_FB=y +CONFIG_LOGO=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig index caa07db..e319b2c 100644 --- a/arch/arm/configs/shark_defconfig +++ b/arch/arm/configs/shark_defconfig @@ -73,7 +73,6 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=m -# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a7827fd..aba4881 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -38,6 +38,7 @@ CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_AUTO_ZRELADDR=y +CONFIG_KEXEC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y @@ -106,12 +107,14 @@ CONFIG_BRCMFMAC=m CONFIG_RT2X00=y CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_TEGRA=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y @@ -127,6 +130,8 @@ CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y @@ -186,6 +191,7 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_TEGRA=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 231dca6..426270f 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -66,9 +66,9 @@ CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y -CONFIG_POWER_SUPPLY=y -CONFIG_AB8500_BM=y -CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y +# CONFIG_POWER_SUPPLY is not set +# CONFIG_AB8500_BM is not set +# CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL is not set CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_MFD_STMPE=y diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S index e59b1d5..19d6cd6 100644 --- a/arch/arm/crypto/aes-armv4.S +++ b/arch/arm/crypto/aes-armv4.S @@ -34,8 +34,9 @@ @ A little glue here to select the correct code below for the ARM CPU @ that is being targetted. +#include <linux/linkage.h> + .text -.code 32 .type AES_Te,%object .align 5 @@ -145,10 +146,8 @@ AES_Te: @ void AES_encrypt(const unsigned char *in, unsigned char *out, @ const AES_KEY *key) { -.global AES_encrypt -.type AES_encrypt,%function .align 5 -AES_encrypt: +ENTRY(AES_encrypt) sub r3,pc,#8 @ AES_encrypt stmdb sp!,{r1,r4-r12,lr} mov r12,r0 @ inp @@ -239,15 +238,8 @@ AES_encrypt: strb r6,[r12,#14] strb r3,[r12,#15] #endif -#if __ARM_ARCH__>=5 ldmia sp!,{r4-r12,pc} -#else - ldmia sp!,{r4-r12,lr} - tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - .word 0xe12fff1e @ interoperable with Thumb ISA:-) -#endif -.size AES_encrypt,.-AES_encrypt +ENDPROC(AES_encrypt) .type _armv4_AES_encrypt,%function .align 2 @@ -386,10 +378,8 @@ _armv4_AES_encrypt: ldr pc,[sp],#4 @ pop and return .size _armv4_AES_encrypt,.-_armv4_AES_encrypt -.global private_AES_set_encrypt_key -.type private_AES_set_encrypt_key,%function .align 5 -private_AES_set_encrypt_key: +ENTRY(private_AES_set_encrypt_key) _armv4_AES_set_encrypt_key: sub r3,pc,#8 @ AES_set_encrypt_key teq r0,#0 @@ -658,15 +648,11 @@ _armv4_AES_set_encrypt_key: .Ldone: mov r0,#0 ldmia sp!,{r4-r12,lr} -.Labrt: tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - .word 0xe12fff1e @ interoperable with Thumb ISA:-) -.size private_AES_set_encrypt_key,.-private_AES_set_encrypt_key +.Labrt: mov pc,lr +ENDPROC(private_AES_set_encrypt_key) -.global private_AES_set_decrypt_key -.type private_AES_set_decrypt_key,%function .align 5 -private_AES_set_decrypt_key: +ENTRY(private_AES_set_decrypt_key) str lr,[sp,#-4]! @ push lr #if 0 @ kernel does both of these in setkey so optimise this bit out by @@ -748,15 +734,8 @@ private_AES_set_decrypt_key: bne .Lmix mov r0,#0 -#if __ARM_ARCH__>=5 ldmia sp!,{r4-r12,pc} -#else - ldmia sp!,{r4-r12,lr} - tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - .word 0xe12fff1e @ interoperable with Thumb ISA:-) -#endif -.size private_AES_set_decrypt_key,.-private_AES_set_decrypt_key +ENDPROC(private_AES_set_decrypt_key) .type AES_Td,%object .align 5 @@ -862,10 +841,8 @@ AES_Td: @ void AES_decrypt(const unsigned char *in, unsigned char *out, @ const AES_KEY *key) { -.global AES_decrypt -.type AES_decrypt,%function .align 5 -AES_decrypt: +ENTRY(AES_decrypt) sub r3,pc,#8 @ AES_decrypt stmdb sp!,{r1,r4-r12,lr} mov r12,r0 @ inp @@ -956,15 +933,8 @@ AES_decrypt: strb r6,[r12,#14] strb r3,[r12,#15] #endif -#if __ARM_ARCH__>=5 ldmia sp!,{r4-r12,pc} -#else - ldmia sp!,{r4-r12,lr} - tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - .word 0xe12fff1e @ interoperable with Thumb ISA:-) -#endif -.size AES_decrypt,.-AES_decrypt +ENDPROC(AES_decrypt) .type _armv4_AES_decrypt,%function .align 2 @@ -1064,7 +1034,9 @@ _armv4_AES_decrypt: and r9,lr,r1,lsr#8 ldrb r7,[r10,r7] @ Td4[s1>>0] - ldrb r1,[r10,r1,lsr#24] @ Td4[s1>>24] + ARM( ldrb r1,[r10,r1,lsr#24] ) @ Td4[s1>>24] + THUMB( add r1,r10,r1,lsr#24 ) @ Td4[s1>>24] + THUMB( ldrb r1,[r1] ) ldrb r8,[r10,r8] @ Td4[s1>>16] eor r0,r7,r0,lsl#24 ldrb r9,[r10,r9] @ Td4[s1>>8] @@ -1077,7 +1049,9 @@ _armv4_AES_decrypt: ldrb r8,[r10,r8] @ Td4[s2>>0] and r9,lr,r2,lsr#16 - ldrb r2,[r10,r2,lsr#24] @ Td4[s2>>24] + ARM( ldrb r2,[r10,r2,lsr#24] ) @ Td4[s2>>24] + THUMB( add r2,r10,r2,lsr#24 ) @ Td4[s2>>24] + THUMB( ldrb r2,[r2] ) eor r0,r0,r7,lsl#8 ldrb r9,[r10,r9] @ Td4[s2>>16] eor r1,r8,r1,lsl#16 @@ -1090,7 +1064,9 @@ _armv4_AES_decrypt: and r9,lr,r3 @ i2 ldrb r9,[r10,r9] @ Td4[s3>>0] - ldrb r3,[r10,r3,lsr#24] @ Td4[s3>>24] + ARM( ldrb r3,[r10,r3,lsr#24] ) @ Td4[s3>>24] + THUMB( add r3,r10,r3,lsr#24 ) @ Td4[s3>>24] + THUMB( ldrb r3,[r3] ) eor r0,r0,r7,lsl#16 ldr r7,[r11,#0] eor r1,r1,r8,lsl#8 diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S index 7050ab1..92c6eed 100644 --- a/arch/arm/crypto/sha1-armv4-large.S +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -51,13 +51,12 @@ @ Profiler-assisted and platform-specific optimization resulted in 10% @ improvement on Cortex A8 core and 12.2 cycles per byte. -.text +#include <linux/linkage.h> -.global sha1_block_data_order -.type sha1_block_data_order,%function +.text .align 2 -sha1_block_data_order: +ENTRY(sha1_block_data_order) stmdb sp!,{r4-r12,lr} add r2,r1,r2,lsl#6 @ r2 to point at the end of r1 ldmia r0,{r3,r4,r5,r6,r7} @@ -194,7 +193,7 @@ sha1_block_data_order: eor r10,r10,r7,ror#2 @ F_00_19(B,C,D) str r9,[r14,#-4]! add r3,r3,r10 @ E+=F_00_19(B,C,D) - teq r14,sp + cmp r14,sp bne .L_00_15 @ [((11+4)*5+2)*3] #if __ARM_ARCH__<7 ldrb r10,[r1,#2] @@ -374,7 +373,9 @@ sha1_block_data_order: @ F_xx_xx add r3,r3,r9 @ E+=X[i] add r3,r3,r10 @ E+=F_20_39(B,C,D) - teq r14,sp @ preserve carry + ARM( teq r14,sp ) @ preserve carry + THUMB( mov r11,sp ) + THUMB( teq r14,r11 ) @ preserve carry bne .L_20_39_or_60_79 @ [+((12+3)*5+2)*4] bcs .L_done @ [+((12+3)*5+2)*4], spare 300 bytes @@ -466,7 +467,7 @@ sha1_block_data_order: add r3,r3,r9 @ E+=X[i] add r3,r3,r10 @ E+=F_40_59(B,C,D) add r3,r3,r11,ror#2 - teq r14,sp + cmp r14,sp bne .L_40_59 @ [+((12+5)*5+2)*4] ldr r8,.LK_60_79 @@ -485,19 +486,12 @@ sha1_block_data_order: teq r1,r2 bne .Lloop @ [+18], total 1307 -#if __ARM_ARCH__>=5 ldmia sp!,{r4-r12,pc} -#else - ldmia sp!,{r4-r12,lr} - tst lr,#1 - moveq pc,lr @ be binary compatible with V4, yet - .word 0xe12fff1e @ interoperable with Thumb ISA:-) -#endif .align 2 .LK_00_19: .word 0x5a827999 .LK_20_39: .word 0x6ed9eba1 .LK_40_59: .word 0x8f1bbcdc .LK_60_79: .word 0xca62c1d6 -.size sha1_block_data_order,.-sha1_block_data_order +ENDPROC(sha1_block_data_order) .asciz "SHA1 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>" .align 2 diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index d40229d..7ade91d 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -1,13 +1,115 @@ #ifndef __ASMARM_ARCH_TIMER_H #define __ASMARM_ARCH_TIMER_H +#include <asm/barrier.h> #include <asm/errno.h> #include <linux/clocksource.h> +#include <linux/init.h> +#include <linux/types.h> + +#include <clocksource/arm_arch_timer.h> #ifdef CONFIG_ARM_ARCH_TIMER int arch_timer_of_register(void); int arch_timer_sched_clock_init(void); -struct timecounter *arch_timer_get_timecounter(void); + +/* + * These register accessors are marked inline so the compiler can + * nicely work out which register we want, and chuck away the rest of + * the code. At least it does so with a recent GCC (4.6.3). + */ +static inline void arch_timer_reg_write(const int access, const int reg, u32 val) +{ + if (access == ARCH_TIMER_PHYS_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); + break; + } + } + + if (access == ARCH_TIMER_VIRT_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mcr p15, 0, %0, c14, c3, 0" : : "r" (val)); + break; + } + } + + isb(); +} + +static inline u32 arch_timer_reg_read(const int access, const int reg) +{ + u32 val = 0; + + if (access == ARCH_TIMER_PHYS_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); + break; + } + } + + if (access == ARCH_TIMER_VIRT_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mrc p15, 0, %0, c14, c3, 0" : "=r" (val)); + break; + } + } + + return val; +} + +static inline u32 arch_timer_get_cntfrq(void) +{ + u32 val; + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val)); + return val; +} + +static inline u64 arch_counter_get_cntpct(void) +{ + u64 cval; + + isb(); + asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval)); + return cval; +} + +static inline u64 arch_counter_get_cntvct(void) +{ + u64 cval; + + isb(); + asm volatile("mrrc p15, 1, %Q0, %R0, c14" : "=r" (cval)); + return cval; +} + +static inline void __cpuinit arch_counter_set_user_access(void) +{ + u32 cntkctl; + + asm volatile("mrc p15, 0, %0, c14, c1, 0" : "=r" (cntkctl)); + + /* disable user access to everything */ + cntkctl &= ~((3 << 8) | (7 << 0)); + + asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl)); +} #else static inline int arch_timer_of_register(void) { @@ -18,11 +120,6 @@ static inline int arch_timer_sched_clock_init(void) { return -ENXIO; } - -static inline struct timecounter *arch_timer_get_timecounter(void) -{ - return NULL; -} #endif #endif diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index eb87200..05ee9ee 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -246,18 +246,14 @@ * * This macro is intended for forcing the CPU into SVC mode at boot time. * you cannot return to the original mode. - * - * Beware, it also clobers LR. */ .macro safe_svcmode_maskall reg:req #if __LINUX_ARM_ARCH__ >= 6 mrs \reg , cpsr - mov lr , \reg - and lr , lr , #MODE_MASK - cmp lr , #HYP_MODE - orr \reg , \reg , #PSR_I_BIT | PSR_F_BIT + eor \reg, \reg, #HYP_MODE + tst \reg, #MODE_MASK bic \reg , \reg , #MODE_MASK - orr \reg , \reg , #SVC_MODE + orr \reg , \reg , #PSR_I_BIT | PSR_F_BIT | SVC_MODE THUMB( orr \reg , \reg , #PSR_T_BIT ) bne 1f orr \reg, \reg, #PSR_A_BIT diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index a59dcb5..ad41ec2 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -64,6 +64,24 @@ extern unsigned int processor_id; #define read_cpuid_ext(reg) 0 #endif +#define ARM_CPU_IMP_ARM 0x41 +#define ARM_CPU_IMP_INTEL 0x69 + +#define ARM_CPU_PART_ARM1136 0xB360 +#define ARM_CPU_PART_ARM1156 0xB560 +#define ARM_CPU_PART_ARM1176 0xB760 +#define ARM_CPU_PART_ARM11MPCORE 0xB020 +#define ARM_CPU_PART_CORTEX_A8 0xC080 +#define ARM_CPU_PART_CORTEX_A9 0xC090 +#define ARM_CPU_PART_CORTEX_A5 0xC050 +#define ARM_CPU_PART_CORTEX_A15 0xC0F0 +#define ARM_CPU_PART_CORTEX_A7 0xC070 + +#define ARM_CPU_XSCALE_ARCH_MASK 0xe000 +#define ARM_CPU_XSCALE_ARCH_V1 0x2000 +#define ARM_CPU_XSCALE_ARCH_V2 0x4000 +#define ARM_CPU_XSCALE_ARCH_V3 0x6000 + /* * The CPU ID never changes at run time, so we might as well tell the * compiler that it's constant. Use this function to read the CPU ID @@ -74,6 +92,21 @@ static inline unsigned int __attribute_const__ read_cpuid_id(void) return read_cpuid(CPUID_ID); } +static inline unsigned int __attribute_const__ read_cpuid_implementor(void) +{ + return (read_cpuid_id() & 0xFF000000) >> 24; +} + +static inline unsigned int __attribute_const__ read_cpuid_part_number(void) +{ + return read_cpuid_id() & 0xFFF0; +} + +static inline unsigned int __attribute_const__ xscale_cpu_arch_version(void) +{ + return read_cpuid_part_number() & ARM_CPU_XSCALE_ARCH_MASK; +} + static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) { return read_cpuid(CPUID_CACHETYPE); diff --git a/arch/arm/include/asm/cti.h b/arch/arm/include/asm/cti.h index f2e5cad..2381199 100644 --- a/arch/arm/include/asm/cti.h +++ b/arch/arm/include/asm/cti.h @@ -2,6 +2,7 @@ #define __ASMARM_CTI_H #include <asm/io.h> +#include <asm/hardware/coresight.h> /* The registers' definition is from section 3.2 of * Embedded Cross Trigger Revision: r0p0 @@ -35,11 +36,6 @@ #define LOCKACCESS 0xFB0 #define LOCKSTATUS 0xFB4 -/* write this value to LOCKACCESS will unlock the module, and - * other value will lock the module - */ -#define LOCKCODE 0xC5ACCE55 - /** * struct cti - cross trigger interface struct * @base: mapped virtual address for the cti base @@ -146,7 +142,7 @@ static inline void cti_irq_ack(struct cti *cti) */ static inline void cti_unlock(struct cti *cti) { - __raw_writel(LOCKCODE, cti->base + LOCKACCESS); + __raw_writel(CS_LAR_KEY, cti->base + LOCKACCESS); } /** @@ -158,6 +154,6 @@ static inline void cti_unlock(struct cti *cti) */ static inline void cti_lock(struct cti *cti) { - __raw_writel(~LOCKCODE, cti->base + LOCKACCESS); + __raw_writel(~CS_LAR_KEY, cti->base + LOCKACCESS); } #endif diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index b69c0d3..dc662fc 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -27,4 +27,10 @@ struct pdev_archdata { #endif }; +#ifdef CONFIG_ARM_DMA_USE_IOMMU +#define to_dma_iommu_mapping(dev) ((dev)->archdata.mapping) +#else +#define to_dma_iommu_mapping(dev) NULL +#endif + #endif diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index 799b094..a8c56ac 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -7,6 +7,7 @@ #include <linux/scatterlist.h> #include <linux/dma-debug.h> #include <linux/kmemcheck.h> +#include <linux/kref.h> struct dma_iommu_mapping { /* iommu specific data */ @@ -29,6 +30,7 @@ void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping); int arm_iommu_attach_device(struct device *dev, struct dma_iommu_mapping *mapping); +void arm_iommu_detach_device(struct device *dev); #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 5694a0d..58b8c6a 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -105,7 +105,7 @@ extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg); */ extern void __set_dma_addr(unsigned int chan, void *addr); #define set_dma_addr(chan, addr) \ - __set_dma_addr(chan, bus_to_virt(addr)) + __set_dma_addr(chan, (void *)__bus_to_virt(addr)) /* Set the DMA byte count for this channel * diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h index 7ecd793..0cf7a6b 100644 --- a/arch/arm/include/asm/hardware/coresight.h +++ b/arch/arm/include/asm/hardware/coresight.h @@ -36,7 +36,7 @@ /* CoreSight Component Registers */ #define CSCR_CLASS 0xff4 -#define UNLOCK_MAGIC 0xc5acce55 +#define CS_LAR_KEY 0xc5acce55 /* ETM control register, "ETM Architecture", 3.3.1 */ #define ETMR_CTRL 0 @@ -147,11 +147,11 @@ #define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0) #define etm_unlock(t) \ - do { etm_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0) + do { etm_writel((t), CS_LAR_KEY, CSMR_LOCKACCESS); } while (0) #define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0) #define etb_unlock(t) \ - do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0) + do { etb_writel((t), CS_LAR_KEY, CSMR_LOCKACCESS); } while (0) #endif /* __ASM_HARDWARE_CORESIGHT_H */ diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h deleted file mode 100644 index 4b1ce6c..0000000 --- a/arch/arm/include/asm/hardware/gic.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * arch/arm/include/asm/hardware/gic.h - * - * Copyright (C) 2002 ARM Limited, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_HARDWARE_GIC_H -#define __ASM_ARM_HARDWARE_GIC_H - -#include <linux/compiler.h> - -#define GIC_CPU_CTRL 0x00 -#define GIC_CPU_PRIMASK 0x04 -#define GIC_CPU_BINPOINT 0x08 -#define GIC_CPU_INTACK 0x0c -#define GIC_CPU_EOI 0x10 -#define GIC_CPU_RUNNINGPRI 0x14 -#define GIC_CPU_HIGHPRI 0x18 - -#define GIC_DIST_CTRL 0x000 -#define GIC_DIST_CTR 0x004 -#define GIC_DIST_ENABLE_SET 0x100 -#define GIC_DIST_ENABLE_CLEAR 0x180 -#define GIC_DIST_PENDING_SET 0x200 -#define GIC_DIST_PENDING_CLEAR 0x280 -#define GIC_DIST_ACTIVE_BIT 0x300 -#define GIC_DIST_PRI 0x400 -#define GIC_DIST_TARGET 0x800 -#define GIC_DIST_CONFIG 0xc00 -#define GIC_DIST_SOFTINT 0xf00 - -#ifndef __ASSEMBLY__ -#include <linux/irqdomain.h> -struct device_node; - -extern struct irq_chip gic_arch_extn; - -void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, - u32 offset, struct device_node *); -int gic_of_init(struct device_node *node, struct device_node *parent); -void gic_secondary_init(unsigned int); -void gic_handle_irq(struct pt_regs *regs); -void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); -void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); - -static inline void gic_init(unsigned int nr, int start, - void __iomem *dist , void __iomem *cpu) -{ - gic_init_bases(nr, start, dist, cpu, 0, NULL); -} - -#endif - -#endif diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h deleted file mode 100644 index 4eea210..0000000 --- a/arch/arm/include/asm/hardware/pl080.h +++ /dev/null @@ -1,146 +0,0 @@ -/* arch/arm/include/asm/hardware/pl080.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * ARM PrimeCell PL080 DMA controller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Note, there are some Samsung updates to this controller block which - * make it not entierly compatible with the PL080 specification from - * ARM. When in doubt, check the Samsung documentation first. - * - * The Samsung defines are PL080S, and add an extra control register, - * the ability to move more than 2^11 counts of data and some extra - * OneNAND features. -*/ - -#ifndef ASM_PL080_H -#define ASM_PL080_H - -#define PL080_INT_STATUS (0x00) -#define PL080_TC_STATUS (0x04) -#define PL080_TC_CLEAR (0x08) -#define PL080_ERR_STATUS (0x0C) -#define PL080_ERR_CLEAR (0x10) -#define PL080_RAW_TC_STATUS (0x14) -#define PL080_RAW_ERR_STATUS (0x18) -#define PL080_EN_CHAN (0x1c) -#define PL080_SOFT_BREQ (0x20) -#define PL080_SOFT_SREQ (0x24) -#define PL080_SOFT_LBREQ (0x28) -#define PL080_SOFT_LSREQ (0x2C) - -#define PL080_CONFIG (0x30) -#define PL080_CONFIG_M2_BE (1 << 2) -#define PL080_CONFIG_M1_BE (1 << 1) -#define PL080_CONFIG_ENABLE (1 << 0) - -#define PL080_SYNC (0x34) - -/* Per channel configuration registers */ - -#define PL080_Cx_STRIDE (0x20) -#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20))) -#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20))) -#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20))) -#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20))) -#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20))) -#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20))) -#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20))) -#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20))) - -#define PL080_CH_SRC_ADDR (0x00) -#define PL080_CH_DST_ADDR (0x04) -#define PL080_CH_LLI (0x08) -#define PL080_CH_CONTROL (0x0C) -#define PL080_CH_CONFIG (0x10) -#define PL080S_CH_CONTROL2 (0x10) -#define PL080S_CH_CONFIG (0x14) - -#define PL080_LLI_ADDR_MASK (0x3fffffff << 2) -#define PL080_LLI_ADDR_SHIFT (2) -#define PL080_LLI_LM_AHB2 (1 << 0) - -#define PL080_CONTROL_TC_IRQ_EN (1 << 31) -#define PL080_CONTROL_PROT_MASK (0x7 << 28) -#define PL080_CONTROL_PROT_SHIFT (28) -#define PL080_CONTROL_PROT_CACHE (1 << 30) -#define PL080_CONTROL_PROT_BUFF (1 << 29) -#define PL080_CONTROL_PROT_SYS (1 << 28) -#define PL080_CONTROL_DST_INCR (1 << 27) -#define PL080_CONTROL_SRC_INCR (1 << 26) -#define PL080_CONTROL_DST_AHB2 (1 << 25) -#define PL080_CONTROL_SRC_AHB2 (1 << 24) -#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21) -#define PL080_CONTROL_DWIDTH_SHIFT (21) -#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18) -#define PL080_CONTROL_SWIDTH_SHIFT (18) -#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15) -#define PL080_CONTROL_DB_SIZE_SHIFT (15) -#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12) -#define PL080_CONTROL_SB_SIZE_SHIFT (12) -#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0) -#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0) - -#define PL080_BSIZE_1 (0x0) -#define PL080_BSIZE_4 (0x1) -#define PL080_BSIZE_8 (0x2) -#define PL080_BSIZE_16 (0x3) -#define PL080_BSIZE_32 (0x4) -#define PL080_BSIZE_64 (0x5) -#define PL080_BSIZE_128 (0x6) -#define PL080_BSIZE_256 (0x7) - -#define PL080_WIDTH_8BIT (0x0) -#define PL080_WIDTH_16BIT (0x1) -#define PL080_WIDTH_32BIT (0x2) - -#define PL080N_CONFIG_ITPROT (1 << 20) -#define PL080N_CONFIG_SECPROT (1 << 19) -#define PL080_CONFIG_HALT (1 << 18) -#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */ -#define PL080_CONFIG_LOCK (1 << 16) -#define PL080_CONFIG_TC_IRQ_MASK (1 << 15) -#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14) -#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11) -#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11) -#define PL080_CONFIG_DST_SEL_MASK (0xf << 6) -#define PL080_CONFIG_DST_SEL_SHIFT (6) -#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1) -#define PL080_CONFIG_SRC_SEL_SHIFT (1) -#define PL080_CONFIG_ENABLE (1 << 0) - -#define PL080_FLOW_MEM2MEM (0x0) -#define PL080_FLOW_MEM2PER (0x1) -#define PL080_FLOW_PER2MEM (0x2) -#define PL080_FLOW_SRC2DST (0x3) -#define PL080_FLOW_SRC2DST_DST (0x4) -#define PL080_FLOW_MEM2PER_PER (0x5) -#define PL080_FLOW_PER2MEM_PER (0x6) -#define PL080_FLOW_SRC2DST_SRC (0x7) - -/* DMA linked list chain structure */ - -struct pl080_lli { - u32 src_addr; - u32 dst_addr; - u32 next_lli; - u32 control0; -}; - -struct pl080s_lli { - u32 src_addr; - u32 dst_addr; - u32 next_lli; - u32 control0; - u32 control1; -}; - -#endif /* ASM_PL080_H */ diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h deleted file mode 100644 index 6636430..0000000 --- a/arch/arm/include/asm/hardware/sp810.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * arch/arm/include/asm/hardware/sp810.h - * - * ARM PrimeXsys System Controller SP810 header file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARM_SP810_H -#define __ASM_ARM_SP810_H - -#include <linux/io.h> - -/* sysctl registers offset */ -#define SCCTRL 0x000 -#define SCSYSSTAT 0x004 -#define SCIMCTRL 0x008 -#define SCIMSTAT 0x00C -#define SCXTALCTRL 0x010 -#define SCPLLCTRL 0x014 -#define SCPLLFCTRL 0x018 -#define SCPERCTRL0 0x01C -#define SCPERCTRL1 0x020 -#define SCPEREN 0x024 -#define SCPERDIS 0x028 -#define SCPERCLKEN 0x02C -#define SCPERSTAT 0x030 -#define SCSYSID0 0xEE0 -#define SCSYSID1 0xEE4 -#define SCSYSID2 0xEE8 -#define SCSYSID3 0xEEC -#define SCITCR 0xF00 -#define SCITIR0 0xF04 -#define SCITIR1 0xF08 -#define SCITOR 0xF0C -#define SCCNTCTRL 0xF10 -#define SCCNTDATA 0xF14 -#define SCCNTSTEP 0xF18 -#define SCPERIPHID0 0xFE0 -#define SCPERIPHID1 0xFE4 -#define SCPERIPHID2 0xFE8 -#define SCPERIPHID3 0xFEC -#define SCPCELLID0 0xFF0 -#define SCPCELLID1 0xFF4 -#define SCPCELLID2 0xFF8 -#define SCPCELLID3 0xFFC - -#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2)) - -static inline void sysctl_soft_reset(void __iomem *base) -{ - /* switch to slow mode */ - writel(0x2, base + SCCTRL); - - /* writing any value to SCSYSSTAT reg will reset system */ - writel(0, base + SCSYSSTAT); -} - -#endif /* __ASM_ARM_SP810_H */ diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h deleted file mode 100644 index 2bebad3..0000000 --- a/arch/arm/include/asm/hardware/vic.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * arch/arm/include/asm/hardware/vic.h - * - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_HARDWARE_VIC_H -#define __ASM_ARM_HARDWARE_VIC_H - -#define VIC_IRQ_STATUS 0x00 -#define VIC_FIQ_STATUS 0x04 -#define VIC_RAW_STATUS 0x08 -#define VIC_INT_SELECT 0x0c /* 1 = FIQ, 0 = IRQ */ -#define VIC_INT_ENABLE 0x10 /* 1 = enable, 0 = disable */ -#define VIC_INT_ENABLE_CLEAR 0x14 -#define VIC_INT_SOFT 0x18 -#define VIC_INT_SOFT_CLEAR 0x1c -#define VIC_PROTECT 0x20 -#define VIC_PL190_VECT_ADDR 0x30 /* PL190 only */ -#define VIC_PL190_DEF_VECT_ADDR 0x34 /* PL190 only */ - -#define VIC_VECT_ADDR0 0x100 /* 0 to 15 (0..31 PL192) */ -#define VIC_VECT_CNTL0 0x200 /* 0 to 15 (0..31 PL192) */ -#define VIC_ITCR 0x300 /* VIC test control register */ - -#define VIC_VECT_CNTL_ENABLE (1 << 5) - -#define VIC_PL192_VECT_ADDR 0xF00 - -#ifndef __ASSEMBLY__ -#include <linux/compiler.h> -#include <linux/types.h> - -struct device_node; -struct pt_regs; - -void __vic_init(void __iomem *base, int irq_start, u32 vic_sources, - u32 resume_sources, struct device_node *node); -void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources); -int vic_of_init(struct device_node *node, struct device_node *parent); -void vic_handle_irq(struct pt_regs *regs); - -#endif /* __ASSEMBLY__ */ -#endif diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index 01169dd..eef55ea 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -85,6 +85,9 @@ static inline void decode_ctrl_reg(u32 reg, #define ARM_DSCR_HDBGEN (1 << 14) #define ARM_DSCR_MDBGEN (1 << 15) +/* OSLSR os lock model bits */ +#define ARM_OSLSR_OSLM0 (1 << 0) + /* opcode2 numbers for the co-processor instructions. */ #define ARM_OP2_BVR 4 #define ARM_OP2_BCR 5 diff --git a/arch/arm/include/asm/idmap.h b/arch/arm/include/asm/idmap.h index bf863ed..1a66f907 100644 --- a/arch/arm/include/asm/idmap.h +++ b/arch/arm/include/asm/idmap.h @@ -8,6 +8,7 @@ #define __idmap __section(.idmap.text) noinline notrace extern pgd_t *idmap_pgd; +extern pgd_t *hyp_pgd; void setup_mm_for_reboot(void); diff --git a/arch/arm/include/asm/kvm_arch_timer.h b/arch/arm/include/asm/kvm_arch_timer.h new file mode 100644 index 0000000..68cb9e1 --- /dev/null +++ b/arch/arm/include/asm/kvm_arch_timer.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_KVM_ARCH_TIMER_H +#define __ASM_ARM_KVM_ARCH_TIMER_H + +#include <linux/clocksource.h> +#include <linux/hrtimer.h> +#include <linux/workqueue.h> + +struct arch_timer_kvm { +#ifdef CONFIG_KVM_ARM_TIMER + /* Is the timer enabled */ + bool enabled; + + /* Virtual offset */ + cycle_t cntvoff; +#endif +}; + +struct arch_timer_cpu { +#ifdef CONFIG_KVM_ARM_TIMER + /* Registers: control register, timer value */ + u32 cntv_ctl; /* Saved/restored */ + cycle_t cntv_cval; /* Saved/restored */ + + /* + * Anything that is not used directly from assembly code goes + * here. + */ + + /* Background timer used when the guest is not running */ + struct hrtimer timer; + + /* Work queued with the above timer expires */ + struct work_struct expired; + + /* Background timer active */ + bool armed; + + /* Timer IRQ */ + const struct kvm_irq_level *irq; +#endif +}; + +#ifdef CONFIG_KVM_ARM_TIMER +int kvm_timer_hyp_init(void); +int kvm_timer_init(struct kvm *kvm); +void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu); +void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu); +void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu); +void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu); +#else +static inline int kvm_timer_hyp_init(void) +{ + return 0; +}; + +static inline int kvm_timer_init(struct kvm *kvm) +{ + return 0; +} + +static inline void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu) {} +static inline void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu) {} +static inline void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu) {} +static inline void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu) {} +#endif + +#endif diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h new file mode 100644 index 0000000..7c3d813 --- /dev/null +++ b/arch/arm/include/asm/kvm_arm.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ARM_KVM_ARM_H__ +#define __ARM_KVM_ARM_H__ + +#include <linux/types.h> + +/* Hyp Configuration Register (HCR) bits */ +#define HCR_TGE (1 << 27) +#define HCR_TVM (1 << 26) +#define HCR_TTLB (1 << 25) +#define HCR_TPU (1 << 24) +#define HCR_TPC (1 << 23) +#define HCR_TSW (1 << 22) +#define HCR_TAC (1 << 21) +#define HCR_TIDCP (1 << 20) +#define HCR_TSC (1 << 19) +#define HCR_TID3 (1 << 18) +#define HCR_TID2 (1 << 17) +#define HCR_TID1 (1 << 16) +#define HCR_TID0 (1 << 15) +#define HCR_TWE (1 << 14) +#define HCR_TWI (1 << 13) +#define HCR_DC (1 << 12) +#define HCR_BSU (3 << 10) +#define HCR_BSU_IS (1 << 10) +#define HCR_FB (1 << 9) +#define HCR_VA (1 << 8) +#define HCR_VI (1 << 7) +#define HCR_VF (1 << 6) +#define HCR_AMO (1 << 5) +#define HCR_IMO (1 << 4) +#define HCR_FMO (1 << 3) +#define HCR_PTW (1 << 2) +#define HCR_SWIO (1 << 1) +#define HCR_VM 1 + +/* + * The bits we set in HCR: + * TAC: Trap ACTLR + * TSC: Trap SMC + * TSW: Trap cache operations by set/way + * TWI: Trap WFI + * TIDCP: Trap L2CTLR/L2ECTLR + * BSU_IS: Upgrade barriers to the inner shareable domain + * FB: Force broadcast of all maintainance operations + * AMO: Override CPSR.A and enable signaling with VA + * IMO: Override CPSR.I and enable signaling with VI + * FMO: Override CPSR.F and enable signaling with VF + * SWIO: Turn set/way invalidates into set/way clean+invalidate + */ +#define HCR_GUEST_MASK (HCR_TSC | HCR_TSW | HCR_TWI | HCR_VM | HCR_BSU_IS | \ + HCR_FB | HCR_TAC | HCR_AMO | HCR_IMO | HCR_FMO | \ + HCR_SWIO | HCR_TIDCP) +#define HCR_VIRT_EXCP_MASK (HCR_VA | HCR_VI | HCR_VF) + +/* System Control Register (SCTLR) bits */ +#define SCTLR_TE (1 << 30) +#define SCTLR_EE (1 << 25) +#define SCTLR_V (1 << 13) + +/* Hyp System Control Register (HSCTLR) bits */ +#define HSCTLR_TE (1 << 30) +#define HSCTLR_EE (1 << 25) +#define HSCTLR_FI (1 << 21) +#define HSCTLR_WXN (1 << 19) +#define HSCTLR_I (1 << 12) +#define HSCTLR_C (1 << 2) +#define HSCTLR_A (1 << 1) +#define HSCTLR_M 1 +#define HSCTLR_MASK (HSCTLR_M | HSCTLR_A | HSCTLR_C | HSCTLR_I | \ + HSCTLR_WXN | HSCTLR_FI | HSCTLR_EE | HSCTLR_TE) + +/* TTBCR and HTCR Registers bits */ +#define TTBCR_EAE (1 << 31) +#define TTBCR_IMP (1 << 30) +#define TTBCR_SH1 (3 << 28) +#define TTBCR_ORGN1 (3 << 26) +#define TTBCR_IRGN1 (3 << 24) +#define TTBCR_EPD1 (1 << 23) +#define TTBCR_A1 (1 << 22) +#define TTBCR_T1SZ (3 << 16) +#define TTBCR_SH0 (3 << 12) +#define TTBCR_ORGN0 (3 << 10) +#define TTBCR_IRGN0 (3 << 8) +#define TTBCR_EPD0 (1 << 7) +#define TTBCR_T0SZ 3 +#define HTCR_MASK (TTBCR_T0SZ | TTBCR_IRGN0 | TTBCR_ORGN0 | TTBCR_SH0) + +/* Hyp System Trap Register */ +#define HSTR_T(x) (1 << x) +#define HSTR_TTEE (1 << 16) +#define HSTR_TJDBX (1 << 17) + +/* Hyp Coprocessor Trap Register */ +#define HCPTR_TCP(x) (1 << x) +#define HCPTR_TCP_MASK (0x3fff) +#define HCPTR_TASE (1 << 15) +#define HCPTR_TTA (1 << 20) +#define HCPTR_TCPAC (1 << 31) + +/* Hyp Debug Configuration Register bits */ +#define HDCR_TDRA (1 << 11) +#define HDCR_TDOSA (1 << 10) +#define HDCR_TDA (1 << 9) +#define HDCR_TDE (1 << 8) +#define HDCR_HPME (1 << 7) +#define HDCR_TPM (1 << 6) +#define HDCR_TPMCR (1 << 5) +#define HDCR_HPMN_MASK (0x1F) + +/* + * The architecture supports 40-bit IPA as input to the 2nd stage translations + * and PTRS_PER_S2_PGD becomes 1024, because each entry covers 1GB of address + * space. + */ +#define KVM_PHYS_SHIFT (40) +#define KVM_PHYS_SIZE (1ULL << KVM_PHYS_SHIFT) +#define KVM_PHYS_MASK (KVM_PHYS_SIZE - 1ULL) +#define PTRS_PER_S2_PGD (1ULL << (KVM_PHYS_SHIFT - 30)) +#define S2_PGD_ORDER get_order(PTRS_PER_S2_PGD * sizeof(pgd_t)) +#define S2_PGD_SIZE (1 << S2_PGD_ORDER) + +/* Virtualization Translation Control Register (VTCR) bits */ +#define VTCR_SH0 (3 << 12) +#define VTCR_ORGN0 (3 << 10) +#define VTCR_IRGN0 (3 << 8) +#define VTCR_SL0 (3 << 6) +#define VTCR_S (1 << 4) +#define VTCR_T0SZ (0xf) +#define VTCR_MASK (VTCR_SH0 | VTCR_ORGN0 | VTCR_IRGN0 | VTCR_SL0 | \ + VTCR_S | VTCR_T0SZ) +#define VTCR_HTCR_SH (VTCR_SH0 | VTCR_ORGN0 | VTCR_IRGN0) +#define VTCR_SL_L2 (0 << 6) /* Starting-level: 2 */ +#define VTCR_SL_L1 (1 << 6) /* Starting-level: 1 */ +#define KVM_VTCR_SL0 VTCR_SL_L1 +/* stage-2 input address range defined as 2^(32-T0SZ) */ +#define KVM_T0SZ (32 - KVM_PHYS_SHIFT) +#define KVM_VTCR_T0SZ (KVM_T0SZ & VTCR_T0SZ) +#define KVM_VTCR_S ((KVM_VTCR_T0SZ << 1) & VTCR_S) + +/* Virtualization Translation Table Base Register (VTTBR) bits */ +#if KVM_VTCR_SL0 == VTCR_SL_L2 /* see ARM DDI 0406C: B4-1720 */ +#define VTTBR_X (14 - KVM_T0SZ) +#else +#define VTTBR_X (5 - KVM_T0SZ) +#endif +#define VTTBR_BADDR_SHIFT (VTTBR_X - 1) +#define VTTBR_BADDR_MASK (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT) +#define VTTBR_VMID_SHIFT (48LLU) +#define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT) + +/* Hyp Syndrome Register (HSR) bits */ +#define HSR_EC_SHIFT (26) +#define HSR_EC (0x3fU << HSR_EC_SHIFT) +#define HSR_IL (1U << 25) +#define HSR_ISS (HSR_IL - 1) +#define HSR_ISV_SHIFT (24) +#define HSR_ISV (1U << HSR_ISV_SHIFT) +#define HSR_SRT_SHIFT (16) +#define HSR_SRT_MASK (0xf << HSR_SRT_SHIFT) +#define HSR_FSC (0x3f) +#define HSR_FSC_TYPE (0x3c) +#define HSR_SSE (1 << 21) +#define HSR_WNR (1 << 6) +#define HSR_CV_SHIFT (24) +#define HSR_CV (1U << HSR_CV_SHIFT) +#define HSR_COND_SHIFT (20) +#define HSR_COND (0xfU << HSR_COND_SHIFT) + +#define FSC_FAULT (0x04) +#define FSC_PERM (0x0c) + +/* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */ +#define HPFAR_MASK (~0xf) + +#define HSR_EC_UNKNOWN (0x00) +#define HSR_EC_WFI (0x01) +#define HSR_EC_CP15_32 (0x03) +#define HSR_EC_CP15_64 (0x04) +#define HSR_EC_CP14_MR (0x05) +#define HSR_EC_CP14_LS (0x06) +#define HSR_EC_CP_0_13 (0x07) +#define HSR_EC_CP10_ID (0x08) +#define HSR_EC_JAZELLE (0x09) +#define HSR_EC_BXJ (0x0A) +#define HSR_EC_CP14_64 (0x0C) +#define HSR_EC_SVC_HYP (0x11) +#define HSR_EC_HVC (0x12) +#define HSR_EC_SMC (0x13) +#define HSR_EC_IABT (0x20) +#define HSR_EC_IABT_HYP (0x21) +#define HSR_EC_DABT (0x24) +#define HSR_EC_DABT_HYP (0x25) + +#define HSR_HVC_IMM_MASK ((1UL << 16) - 1) + +#endif /* __ARM_KVM_ARM_H__ */ diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h new file mode 100644 index 0000000..e4956f4 --- /dev/null +++ b/arch/arm/include/asm/kvm_asm.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ARM_KVM_ASM_H__ +#define __ARM_KVM_ASM_H__ + +/* 0 is reserved as an invalid value. */ +#define c0_MPIDR 1 /* MultiProcessor ID Register */ +#define c0_CSSELR 2 /* Cache Size Selection Register */ +#define c1_SCTLR 3 /* System Control Register */ +#define c1_ACTLR 4 /* Auxilliary Control Register */ +#define c1_CPACR 5 /* Coprocessor Access Control */ +#define c2_TTBR0 6 /* Translation Table Base Register 0 */ +#define c2_TTBR0_high 7 /* TTBR0 top 32 bits */ +#define c2_TTBR1 8 /* Translation Table Base Register 1 */ +#define c2_TTBR1_high 9 /* TTBR1 top 32 bits */ +#define c2_TTBCR 10 /* Translation Table Base Control R. */ +#define c3_DACR 11 /* Domain Access Control Register */ +#define c5_DFSR 12 /* Data Fault Status Register */ +#define c5_IFSR 13 /* Instruction Fault Status Register */ +#define c5_ADFSR 14 /* Auxilary Data Fault Status R */ +#define c5_AIFSR 15 /* Auxilary Instrunction Fault Status R */ +#define c6_DFAR 16 /* Data Fault Address Register */ +#define c6_IFAR 17 /* Instruction Fault Address Register */ +#define c9_L2CTLR 18 /* Cortex A15 L2 Control Register */ +#define c10_PRRR 19 /* Primary Region Remap Register */ +#define c10_NMRR 20 /* Normal Memory Remap Register */ +#define c12_VBAR 21 /* Vector Base Address Register */ +#define c13_CID 22 /* Context ID Register */ +#define c13_TID_URW 23 /* Thread ID, User R/W */ +#define c13_TID_URO 24 /* Thread ID, User R/O */ +#define c13_TID_PRIV 25 /* Thread ID, Privileged */ +#define c14_CNTKCTL 26 /* Timer Control Register (PL1) */ +#define NR_CP15_REGS 27 /* Number of regs (incl. invalid) */ + +#define ARM_EXCEPTION_RESET 0 +#define ARM_EXCEPTION_UNDEFINED 1 +#define ARM_EXCEPTION_SOFTWARE 2 +#define ARM_EXCEPTION_PREF_ABORT 3 +#define ARM_EXCEPTION_DATA_ABORT 4 +#define ARM_EXCEPTION_IRQ 5 +#define ARM_EXCEPTION_FIQ 6 +#define ARM_EXCEPTION_HVC 7 + +#ifndef __ASSEMBLY__ +struct kvm; +struct kvm_vcpu; + +extern char __kvm_hyp_init[]; +extern char __kvm_hyp_init_end[]; + +extern char __kvm_hyp_exit[]; +extern char __kvm_hyp_exit_end[]; + +extern char __kvm_hyp_vector[]; + +extern char __kvm_hyp_code_start[]; +extern char __kvm_hyp_code_end[]; + +extern void __kvm_tlb_flush_vmid(struct kvm *kvm); + +extern void __kvm_flush_vm_context(void); +extern void __kvm_tlb_flush_vmid(struct kvm *kvm); + +extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); +#endif + +#endif /* __ARM_KVM_ASM_H__ */ diff --git a/arch/arm/include/asm/kvm_coproc.h b/arch/arm/include/asm/kvm_coproc.h new file mode 100644 index 0000000..4917c2f --- /dev/null +++ b/arch/arm/include/asm/kvm_coproc.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2012 Rusty Russell IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ARM_KVM_COPROC_H__ +#define __ARM_KVM_COPROC_H__ +#include <linux/kvm_host.h> + +void kvm_reset_coprocs(struct kvm_vcpu *vcpu); + +struct kvm_coproc_target_table { + unsigned target; + const struct coproc_reg *table; + size_t num; +}; +void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table); + +int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run); +int kvm_handle_cp_0_13_access(struct kvm_vcpu *vcpu, struct kvm_run *run); +int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run); +int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run); +int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run); +int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run); + +unsigned long kvm_arm_num_guest_msrs(struct kvm_vcpu *vcpu); +int kvm_arm_copy_msrindices(struct kvm_vcpu *vcpu, u64 __user *uindices); +void kvm_coproc_table_init(void); + +struct kvm_one_reg; +int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices); +int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); +int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); +unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu); +#endif /* __ARM_KVM_COPROC_H__ */ diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h new file mode 100644 index 0000000..fd61199 --- /dev/null +++ b/arch/arm/include/asm/kvm_emulate.h @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ARM_KVM_EMULATE_H__ +#define __ARM_KVM_EMULATE_H__ + +#include <linux/kvm_host.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_mmio.h> + +u32 *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num); +u32 *vcpu_spsr(struct kvm_vcpu *vcpu); + +int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run); +void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr); +void kvm_inject_undefined(struct kvm_vcpu *vcpu); +void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr); +void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr); + +static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu) +{ + return 1; +} + +static inline u32 *vcpu_pc(struct kvm_vcpu *vcpu) +{ + return (u32 *)&vcpu->arch.regs.usr_regs.ARM_pc; +} + +static inline u32 *vcpu_cpsr(struct kvm_vcpu *vcpu) +{ + return (u32 *)&vcpu->arch.regs.usr_regs.ARM_cpsr; +} + +static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) +{ + *vcpu_cpsr(vcpu) |= PSR_T_BIT; +} + +static inline bool mode_has_spsr(struct kvm_vcpu *vcpu) +{ + unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK; + return (cpsr_mode > USR_MODE && cpsr_mode < SYSTEM_MODE); +} + +static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu) +{ + unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK; + return cpsr_mode > USR_MODE;; +} + +static inline bool kvm_vcpu_reg_is_pc(struct kvm_vcpu *vcpu, int reg) +{ + return reg == 15; +} + +#endif /* __ARM_KVM_EMULATE_H__ */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h new file mode 100644 index 0000000..d1736a5 --- /dev/null +++ b/arch/arm/include/asm/kvm_host.h @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ARM_KVM_HOST_H__ +#define __ARM_KVM_HOST_H__ + +#include <asm/kvm.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_mmio.h> +#include <asm/fpstate.h> +#include <asm/kvm_arch_timer.h> + +#define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS +#define KVM_USER_MEM_SLOTS 32 +#define KVM_PRIVATE_MEM_SLOTS 4 +#define KVM_COALESCED_MMIO_PAGE_OFFSET 1 +#define KVM_HAVE_ONE_REG + +#define KVM_VCPU_MAX_FEATURES 1 + +/* We don't currently support large pages. */ +#define KVM_HPAGE_GFN_SHIFT(x) 0 +#define KVM_NR_PAGE_SIZES 1 +#define KVM_PAGES_PER_HPAGE(x) (1UL<<31) + +#include <asm/kvm_vgic.h> + +struct kvm_vcpu; +u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode); +int kvm_target_cpu(void); +int kvm_reset_vcpu(struct kvm_vcpu *vcpu); +void kvm_reset_coprocs(struct kvm_vcpu *vcpu); + +struct kvm_arch { + /* VTTBR value associated with below pgd and vmid */ + u64 vttbr; + + /* Timer */ + struct arch_timer_kvm timer; + + /* + * Anything that is not used directly from assembly code goes + * here. + */ + + /* The VMID generation used for the virt. memory system */ + u64 vmid_gen; + u32 vmid; + + /* Stage-2 page table */ + pgd_t *pgd; + + /* Interrupt controller */ + struct vgic_dist vgic; +}; + +#define KVM_NR_MEM_OBJS 40 + +/* + * We don't want allocation failures within the mmu code, so we preallocate + * enough memory for a single page fault in a cache. + */ +struct kvm_mmu_memory_cache { + int nobjs; + void *objects[KVM_NR_MEM_OBJS]; +}; + +struct kvm_vcpu_arch { + struct kvm_regs regs; + + int target; /* Processor target */ + DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES); + + /* System control coprocessor (cp15) */ + u32 cp15[NR_CP15_REGS]; + + /* The CPU type we expose to the VM */ + u32 midr; + + /* Exception Information */ + u32 hsr; /* Hyp Syndrome Register */ + u32 hxfar; /* Hyp Data/Inst Fault Address Register */ + u32 hpfar; /* Hyp IPA Fault Address Register */ + + /* Floating point registers (VFP and Advanced SIMD/NEON) */ + struct vfp_hard_struct vfp_guest; + struct vfp_hard_struct *vfp_host; + + /* VGIC state */ + struct vgic_cpu vgic_cpu; + struct arch_timer_cpu timer_cpu; + + /* + * Anything that is not used directly from assembly code goes + * here. + */ + /* dcache set/way operation pending */ + int last_pcpu; + cpumask_t require_dcache_flush; + + /* Don't run the guest on this vcpu */ + bool pause; + + /* IO related fields */ + struct kvm_decode mmio_decode; + + /* Interrupt related fields */ + u32 irq_lines; /* IRQ and FIQ levels */ + + /* Hyp exception information */ + u32 hyp_pc; /* PC when exception was taken from Hyp mode */ + + /* Cache some mmu pages needed inside spinlock regions */ + struct kvm_mmu_memory_cache mmu_page_cache; + + /* Detect first run of a vcpu */ + bool has_run_once; +}; + +struct kvm_vm_stat { + u32 remote_tlb_flush; +}; + +struct kvm_vcpu_stat { + u32 halt_wakeup; +}; + +struct kvm_vcpu_init; +int kvm_vcpu_set_target(struct kvm_vcpu *vcpu, + const struct kvm_vcpu_init *init); +unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); +int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); +struct kvm_one_reg; +int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); +int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg); +u64 kvm_call_hyp(void *hypfn, ...); +void force_vm_exit(const cpumask_t *mask); + +#define KVM_ARCH_WANT_MMU_NOTIFIER +struct kvm; +int kvm_unmap_hva(struct kvm *kvm, unsigned long hva); +int kvm_unmap_hva_range(struct kvm *kvm, + unsigned long start, unsigned long end); +void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte); + +unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu); +int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices); + +/* We do not have shadow page tables, hence the empty hooks */ +static inline int kvm_age_hva(struct kvm *kvm, unsigned long hva) +{ + return 0; +} + +static inline int kvm_test_age_hva(struct kvm *kvm, unsigned long hva) +{ + return 0; +} + +struct kvm_vcpu *kvm_arm_get_running_vcpu(void); +struct kvm_vcpu __percpu **kvm_get_running_vcpus(void); + +int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices); +unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu); +struct kvm_one_reg; +int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); +int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); + +#endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_mmio.h b/arch/arm/include/asm/kvm_mmio.h new file mode 100644 index 0000000..adcc0d7 --- /dev/null +++ b/arch/arm/include/asm/kvm_mmio.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ARM_KVM_MMIO_H__ +#define __ARM_KVM_MMIO_H__ + +#include <linux/kvm_host.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_arm.h> + +struct kvm_decode { + unsigned long rt; + bool sign_extend; +}; + +/* + * The in-kernel MMIO emulation code wants to use a copy of run->mmio, + * which is an anonymous type. Use our own type instead. + */ +struct kvm_exit_mmio { + phys_addr_t phys_addr; + u8 data[8]; + u32 len; + bool is_write; +}; + +static inline void kvm_prepare_mmio(struct kvm_run *run, + struct kvm_exit_mmio *mmio) +{ + run->mmio.phys_addr = mmio->phys_addr; + run->mmio.len = mmio->len; + run->mmio.is_write = mmio->is_write; + memcpy(run->mmio.data, mmio->data, mmio->len); + run->exit_reason = KVM_EXIT_MMIO; +} + +int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run); +int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, + phys_addr_t fault_ipa); + +#endif /* __ARM_KVM_MMIO_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h new file mode 100644 index 0000000..421a20b --- /dev/null +++ b/arch/arm/include/asm/kvm_mmu.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ARM_KVM_MMU_H__ +#define __ARM_KVM_MMU_H__ + +int create_hyp_mappings(void *from, void *to); +int create_hyp_io_mappings(void *from, void *to, phys_addr_t); +void free_hyp_pmds(void); + +int kvm_alloc_stage2_pgd(struct kvm *kvm); +void kvm_free_stage2_pgd(struct kvm *kvm); +int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, + phys_addr_t pa, unsigned long size); + +int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run); + +void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu); + +phys_addr_t kvm_mmu_get_httbr(void); +int kvm_mmu_init(void); +void kvm_clear_hyp_idmap(void); + +static inline bool kvm_is_write_fault(unsigned long hsr) +{ + unsigned long hsr_ec = hsr >> HSR_EC_SHIFT; + if (hsr_ec == HSR_EC_IABT) + return false; + else if ((hsr & HSR_ISV) && !(hsr & HSR_WNR)) + return false; + else + return true; +} + +#endif /* __ARM_KVM_MMU_H__ */ diff --git a/arch/arm/include/asm/kvm_psci.h b/arch/arm/include/asm/kvm_psci.h new file mode 100644 index 0000000..9a83d98 --- /dev/null +++ b/arch/arm/include/asm/kvm_psci.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2012 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ARM_KVM_PSCI_H__ +#define __ARM_KVM_PSCI_H__ + +bool kvm_psci_call(struct kvm_vcpu *vcpu); + +#endif /* __ARM_KVM_PSCI_H__ */ diff --git a/arch/arm/include/asm/kvm_vgic.h b/arch/arm/include/asm/kvm_vgic.h new file mode 100644 index 0000000..ab97207 --- /dev/null +++ b/arch/arm/include/asm/kvm_vgic.h @@ -0,0 +1,221 @@ +/* + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_KVM_VGIC_H +#define __ASM_ARM_KVM_VGIC_H + +#include <linux/kernel.h> +#include <linux/kvm.h> +#include <linux/kvm_host.h> +#include <linux/irqreturn.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/irqchip/arm-gic.h> + +#define VGIC_NR_IRQS 128 +#define VGIC_NR_SGIS 16 +#define VGIC_NR_PPIS 16 +#define VGIC_NR_PRIVATE_IRQS (VGIC_NR_SGIS + VGIC_NR_PPIS) +#define VGIC_NR_SHARED_IRQS (VGIC_NR_IRQS - VGIC_NR_PRIVATE_IRQS) +#define VGIC_MAX_CPUS KVM_MAX_VCPUS +#define VGIC_MAX_LRS (1 << 6) + +/* Sanity checks... */ +#if (VGIC_MAX_CPUS > 8) +#error Invalid number of CPU interfaces +#endif + +#if (VGIC_NR_IRQS & 31) +#error "VGIC_NR_IRQS must be a multiple of 32" +#endif + +#if (VGIC_NR_IRQS > 1024) +#error "VGIC_NR_IRQS must be <= 1024" +#endif + +/* + * The GIC distributor registers describing interrupts have two parts: + * - 32 per-CPU interrupts (SGI + PPI) + * - a bunch of shared interrupts (SPI) + */ +struct vgic_bitmap { + union { + u32 reg[VGIC_NR_PRIVATE_IRQS / 32]; + DECLARE_BITMAP(reg_ul, VGIC_NR_PRIVATE_IRQS); + } percpu[VGIC_MAX_CPUS]; + union { + u32 reg[VGIC_NR_SHARED_IRQS / 32]; + DECLARE_BITMAP(reg_ul, VGIC_NR_SHARED_IRQS); + } shared; +}; + +struct vgic_bytemap { + u32 percpu[VGIC_MAX_CPUS][VGIC_NR_PRIVATE_IRQS / 4]; + u32 shared[VGIC_NR_SHARED_IRQS / 4]; +}; + +struct vgic_dist { +#ifdef CONFIG_KVM_ARM_VGIC + spinlock_t lock; + bool ready; + + /* Virtual control interface mapping */ + void __iomem *vctrl_base; + + /* Distributor and vcpu interface mapping in the guest */ + phys_addr_t vgic_dist_base; + phys_addr_t vgic_cpu_base; + + /* Distributor enabled */ + u32 enabled; + + /* Interrupt enabled (one bit per IRQ) */ + struct vgic_bitmap irq_enabled; + + /* Interrupt 'pin' level */ + struct vgic_bitmap irq_state; + + /* Level-triggered interrupt in progress */ + struct vgic_bitmap irq_active; + + /* Interrupt priority. Not used yet. */ + struct vgic_bytemap irq_priority; + + /* Level/edge triggered */ + struct vgic_bitmap irq_cfg; + + /* Source CPU per SGI and target CPU */ + u8 irq_sgi_sources[VGIC_MAX_CPUS][VGIC_NR_SGIS]; + + /* Target CPU for each IRQ */ + u8 irq_spi_cpu[VGIC_NR_SHARED_IRQS]; + struct vgic_bitmap irq_spi_target[VGIC_MAX_CPUS]; + + /* Bitmap indicating which CPU has something pending */ + unsigned long irq_pending_on_cpu; +#endif +}; + +struct vgic_cpu { +#ifdef CONFIG_KVM_ARM_VGIC + /* per IRQ to LR mapping */ + u8 vgic_irq_lr_map[VGIC_NR_IRQS]; + + /* Pending interrupts on this VCPU */ + DECLARE_BITMAP( pending_percpu, VGIC_NR_PRIVATE_IRQS); + DECLARE_BITMAP( pending_shared, VGIC_NR_SHARED_IRQS); + + /* Bitmap of used/free list registers */ + DECLARE_BITMAP( lr_used, VGIC_MAX_LRS); + + /* Number of list registers on this CPU */ + int nr_lr; + + /* CPU vif control registers for world switch */ + u32 vgic_hcr; + u32 vgic_vmcr; + u32 vgic_misr; /* Saved only */ + u32 vgic_eisr[2]; /* Saved only */ + u32 vgic_elrsr[2]; /* Saved only */ + u32 vgic_apr; + u32 vgic_lr[VGIC_MAX_LRS]; +#endif +}; + +#define LR_EMPTY 0xff + +struct kvm; +struct kvm_vcpu; +struct kvm_run; +struct kvm_exit_mmio; + +#ifdef CONFIG_KVM_ARM_VGIC +int kvm_vgic_set_addr(struct kvm *kvm, unsigned long type, u64 addr); +int kvm_vgic_hyp_init(void); +int kvm_vgic_init(struct kvm *kvm); +int kvm_vgic_create(struct kvm *kvm); +int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu); +void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu); +void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu); +int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int irq_num, + bool level); +int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu); +bool vgic_handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *run, + struct kvm_exit_mmio *mmio); + +#define irqchip_in_kernel(k) (!!((k)->arch.vgic.vctrl_base)) +#define vgic_initialized(k) ((k)->arch.vgic.ready) + +#else +static inline int kvm_vgic_hyp_init(void) +{ + return 0; +} + +static inline int kvm_vgic_set_addr(struct kvm *kvm, unsigned long type, u64 addr) +{ + return 0; +} + +static inline int kvm_vgic_init(struct kvm *kvm) +{ + return 0; +} + +static inline int kvm_vgic_create(struct kvm *kvm) +{ + return 0; +} + +static inline int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu) +{ + return 0; +} + +static inline void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu) {} +static inline void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu) {} + +static inline int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, + unsigned int irq_num, bool level) +{ + return 0; +} + +static inline int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu) +{ + return 0; +} + +static inline bool vgic_handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *run, + struct kvm_exit_mmio *mmio) +{ + return false; +} + +static inline int irqchip_in_kernel(struct kvm *kvm) +{ + return 0; +} + +static inline bool vgic_initialized(struct kvm *kvm) +{ + return true; +} +#endif + +#endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 917d4fc..308ad7d 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -12,7 +12,6 @@ struct tag; struct meminfo; -struct sys_timer; struct pt_regs; struct smp_operations; #ifdef CONFIG_SMP @@ -48,7 +47,7 @@ struct machine_desc { void (*map_io)(void);/* IO mapping function */ void (*init_early)(void); void (*init_irq)(void); - struct sys_timer *timer; /* system tick timer */ + void (*init_time)(void); void (*init_machine)(void); void (*init_late)(void); #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index 15cb035..18c8830 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -22,6 +22,7 @@ extern int show_fiq_list(struct seq_file *, int); #ifdef CONFIG_MULTI_IRQ_HANDLER extern void (*handle_arch_irq)(struct pt_regs *); +extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); #endif /* diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index db9fedb..5cf2e97 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -23,6 +23,7 @@ struct hw_pci { #endif struct pci_ops *ops; int nr_controllers; + void **private_data; int (*setup)(int nr, struct pci_sys_data *); struct pci_bus *(*scan)(int nr, struct pci_sys_data *); void (*preinit)(void); diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index 6ca945f..90c12e1 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -10,36 +10,6 @@ #ifndef __ASM_ARM_MACH_TIME_H #define __ASM_ARM_MACH_TIME_H -/* - * This is our kernel timer structure. - * - * - init - * Initialise the kernels jiffy timer source, claim interrupt - * using setup_irq. This is called early on during initialisation - * while interrupts are still disabled on the local CPU. - * - suspend - * Suspend the kernel jiffy timer source, if necessary. This - * is called with interrupts disabled, after all normal devices - * have been suspended. If no action is required, set this to - * NULL. - * - resume - * Resume the kernel jiffy timer source, if necessary. This - * is called with interrupts disabled before any normal devices - * are resumed. If no action is required, set this to NULL. - * - offset - * Return the timer offset in microseconds since the last timer - * interrupt. Note: this must take account of any unprocessed - * timer interrupt which may be pending. - */ -struct sys_timer { - void (*init)(void); - void (*suspend)(void); - void (*resume)(void); -#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET - unsigned long (*offset)(void); -#endif -}; - extern void timer_tick(void); struct timespec; diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 1c4df27..57870ab 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -36,23 +36,23 @@ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area */ #define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET) -#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(0x01000000)) +#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M)) #define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M) /* * The maximum size of a 26-bit user space task. */ -#define TASK_SIZE_26 UL(0x04000000) +#define TASK_SIZE_26 (UL(1) << 26) /* * The module space lives between the addresses given by TASK_SIZE * and PAGE_OFFSET - it must be within 32MB of the kernel text. */ #ifndef CONFIG_THUMB2_KERNEL -#define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024) +#define MODULES_VADDR (PAGE_OFFSET - SZ_16M) #else /* smaller range for Thumb-2 symbols relocation (2^24)*/ -#define MODULES_VADDR (PAGE_OFFSET - 8*1024*1024) +#define MODULES_VADDR (PAGE_OFFSET - SZ_8M) #endif #if TASK_SIZE > MODULES_VADDR @@ -245,6 +245,7 @@ static inline void *phys_to_virt(phys_addr_t x) #define __bus_to_pfn(x) __phys_to_pfn(x) #endif +#ifdef CONFIG_VIRT_TO_BUS static inline __deprecated unsigned long virt_to_bus(void *x) { return __virt_to_bus((unsigned long)x); @@ -254,6 +255,7 @@ static inline __deprecated void *bus_to_virt(unsigned long x) { return (void *)__bus_to_virt(x); } +#endif /* * Conversion between a struct page and a physical address. diff --git a/arch/arm/include/asm/opcodes-sec.h b/arch/arm/include/asm/opcodes-sec.h new file mode 100644 index 0000000..bc3a917 --- /dev/null +++ b/arch/arm/include/asm/opcodes-sec.h @@ -0,0 +1,24 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#ifndef __ASM_ARM_OPCODES_SEC_H +#define __ASM_ARM_OPCODES_SEC_H + +#include <asm/opcodes.h> + +#define __SMC(imm4) __inst_arm_thumb32( \ + 0xE1600070 | (((imm4) & 0xF) << 0), \ + 0xF7F08000 | (((imm4) & 0xF) << 16) \ +) + +#endif /* __ASM_ARM_OPCODES_SEC_H */ diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index 74e211a..e796c59 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -10,6 +10,7 @@ #define __ASM_ARM_OPCODES_H #ifndef __ASSEMBLY__ +#include <linux/linkage.h> extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); #endif diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index 53426c6..12f71a1 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -92,6 +92,7 @@ static inline void outer_flush_range(phys_addr_t start, phys_addr_t end) static inline void outer_flush_all(void) { } static inline void outer_inv_all(void) { } static inline void outer_disable(void) { } +static inline void outer_resume(void) { } #endif diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h index d795282..18f5cef 100644 --- a/arch/arm/include/asm/pgtable-3level-hwdef.h +++ b/arch/arm/include/asm/pgtable-3level-hwdef.h @@ -32,6 +32,9 @@ #define PMD_TYPE_SECT (_AT(pmdval_t, 1) << 0) #define PMD_BIT4 (_AT(pmdval_t, 0)) #define PMD_DOMAIN(x) (_AT(pmdval_t, 0)) +#define PMD_APTABLE_SHIFT (61) +#define PMD_APTABLE (_AT(pgdval_t, 3) << PGD_APTABLE_SHIFT) +#define PMD_PXNTABLE (_AT(pgdval_t, 1) << 59) /* * - section @@ -41,9 +44,11 @@ #define PMD_SECT_S (_AT(pmdval_t, 3) << 8) #define PMD_SECT_AF (_AT(pmdval_t, 1) << 10) #define PMD_SECT_nG (_AT(pmdval_t, 1) << 11) +#define PMD_SECT_PXN (_AT(pmdval_t, 1) << 53) #define PMD_SECT_XN (_AT(pmdval_t, 1) << 54) #define PMD_SECT_AP_WRITE (_AT(pmdval_t, 0)) #define PMD_SECT_AP_READ (_AT(pmdval_t, 0)) +#define PMD_SECT_AP1 (_AT(pmdval_t, 1) << 6) #define PMD_SECT_TEX(x) (_AT(pmdval_t, 0)) /* diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index a3f3792..6ef8afd 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -104,11 +104,29 @@ */ #define L_PGD_SWAPPER (_AT(pgdval_t, 1) << 55) /* swapper_pg_dir entry */ +/* + * 2nd stage PTE definitions for LPAE. + */ +#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */ +#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */ +#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */ +#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */ +#define L_PTE_S2_RDWR (_AT(pteval_t, 2) << 6) /* HAP[2:1] */ + +/* + * Hyp-mode PL2 PTE definitions for LPAE. + */ +#define L_PTE_HYP L_PTE_USER + #ifndef __ASSEMBLY__ #define pud_none(pud) (!pud_val(pud)) #define pud_bad(pud) (!(pud_val(pud) & 2)) #define pud_present(pud) (pud_val(pud)) +#define pmd_table(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \ + PMD_TYPE_TABLE) +#define pmd_sect(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \ + PMD_TYPE_SECT) #define pud_clear(pudp) \ do { \ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 9c82f988..f30ac3b 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -70,6 +70,9 @@ extern void __pgd_error(const char *file, int line, pgd_t); extern pgprot_t pgprot_user; extern pgprot_t pgprot_kernel; +extern pgprot_t pgprot_hyp_device; +extern pgprot_t pgprot_s2; +extern pgprot_t pgprot_s2_device; #define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b)) @@ -82,6 +85,10 @@ extern pgprot_t pgprot_kernel; #define PAGE_READONLY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY) #define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN) #define PAGE_KERNEL_EXEC pgprot_kernel +#define PAGE_HYP _MOD_PROT(pgprot_kernel, L_PTE_HYP) +#define PAGE_HYP_DEVICE _MOD_PROT(pgprot_hyp_device, L_PTE_HYP) +#define PAGE_S2 _MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY) +#define PAGE_S2_DEVICE _MOD_PROT(pgprot_s2_device, L_PTE_USER | L_PTE_S2_RDONLY) #define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE) #define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN) diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h new file mode 100644 index 0000000..ce0dbe7 --- /dev/null +++ b/arch/arm/include/asm/psci.h @@ -0,0 +1,36 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#ifndef __ASM_ARM_PSCI_H +#define __ASM_ARM_PSCI_H + +#define PSCI_POWER_STATE_TYPE_STANDBY 0 +#define PSCI_POWER_STATE_TYPE_POWER_DOWN 1 + +struct psci_power_state { + u16 id; + u8 type; + u8 affinity_level; +}; + +struct psci_operations { + int (*cpu_suspend)(struct psci_power_state state, + unsigned long entry_point); + int (*cpu_off)(struct psci_power_state state); + int (*cpu_on)(unsigned long cpuid, unsigned long entry_point); + int (*migrate)(unsigned long cpuid); +}; + +extern struct psci_operations psci_ops; + +#endif /* __ASM_ARM_PSCI_H */ diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h index 9a0ea6a..c0eb412 100644 --- a/arch/arm/include/asm/signal.h +++ b/arch/arm/include/asm/signal.h @@ -16,23 +16,7 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; +#define __ARCH_HAS_SA_RESTORER #include <asm/sigcontext.h> #endif diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h index 86dff32..18d1693 100644 --- a/arch/arm/include/asm/smp_scu.h +++ b/arch/arm/include/asm/smp_scu.h @@ -6,6 +6,23 @@ #define SCU_PM_POWEROFF 3 #ifndef __ASSEMBLER__ + +#include <asm/cputype.h> + +static inline bool scu_a9_has_base(void) +{ + return read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; +} + +static inline unsigned long scu_a9_get_base(void) +{ + unsigned long pa; + + asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (pa)); + + return pa; +} + unsigned int scu_get_core_count(void __iomem *); int scu_power_mode(void __iomem *, unsigned int); diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index b4ca707..6220e9f 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -119,22 +119,8 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) static inline void arch_spin_unlock(arch_spinlock_t *lock) { - unsigned long tmp; - u32 slock; - smp_mb(); - - __asm__ __volatile__( -" mov %1, #1\n" -"1: ldrex %0, [%2]\n" -" uadd16 %0, %0, %1\n" -" strex %1, %0, [%2]\n" -" teq %1, #0\n" -" bne 1b" - : "=&r" (slock), "=&r" (tmp) - : "r" (&lock->slock) - : "cc"); - + lock->tickets.owner++; dsb_sev(); } diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 21a2700..e4ddfb3 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -26,8 +26,6 @@ #define __ARCH_WANT_SYS_NICE #define __ARCH_WANT_SYS_SIGPENDING #define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND #define __ARCH_WANT_SYS_OLD_MMAP #define __ARCH_WANT_SYS_OLD_SELECT diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index 86164df..50af92b 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -24,9 +24,9 @@ /* * Flag indicating that the kernel was not entered in the same mode on every * CPU. The zImage loader stashes this value in an SPSR, so we need an - * architecturally defined flag bit here (the N flag, as it happens) + * architecturally defined flag bit here. */ -#define BOOT_CPU_MODE_MISMATCH (1<<31) +#define BOOT_CPU_MODE_MISMATCH PSR_N_BIT #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h index 94b4e90..5c27696 100644 --- a/arch/arm/include/asm/xen/events.h +++ b/arch/arm/include/asm/xen/events.h @@ -15,4 +15,26 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return raw_irqs_disabled_flags(regs->ARM_cpsr); } +/* + * We cannot use xchg because it does not support 8-byte + * values. However it is safe to use {ldr,dtd}exd directly because all + * platforms which Xen can run on support those instructions. + */ +static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val) +{ + xen_ulong_t oldval; + unsigned int tmp; + + wmb(); + asm volatile("@ xchg_xen_ulong\n" + "1: ldrexd %0, %H0, [%3]\n" + " strexd %1, %2, %H2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (oldval), "=&r" (tmp) + : "r" (val), "r" (ptr) + : "memory", "cc"); + return oldval; +} + #endif /* _ASM_ARM_XEN_EVENTS_H */ diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index c6b9096..30cdacb 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -1,6 +1,7 @@ #ifndef _ASM_ARM_XEN_PAGE_H #define _ASM_ARM_XEN_PAGE_H +#include <asm/mach/map.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -86,4 +87,7 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) { return __set_phys_to_machine(pfn, mfn); } + +#define xen_remap(cookie, size) __arm_ioremap((cookie), (size), MT_MEMORY); + #endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h new file mode 100644 index 0000000..91d38e3 --- /dev/null +++ b/arch/arm/include/debug/imx-uart.h @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __DEBUG_IMX_UART_H +#define __DEBUG_IMX_UART_H + +#define IMX1_UART1_BASE_ADDR 0x00206000 +#define IMX1_UART2_BASE_ADDR 0x00207000 +#define IMX1_UART_BASE_ADDR(n) IMX1_UART##n##_BASE_ADDR +#define IMX1_UART_BASE(n) IMX1_UART_BASE_ADDR(n) + +#define IMX21_UART1_BASE_ADDR 0x1000a000 +#define IMX21_UART2_BASE_ADDR 0x1000b000 +#define IMX21_UART3_BASE_ADDR 0x1000c000 +#define IMX21_UART4_BASE_ADDR 0x1000d000 +#define IMX21_UART_BASE_ADDR(n) IMX21_UART##n##_BASE_ADDR +#define IMX21_UART_BASE(n) IMX21_UART_BASE_ADDR(n) + +#define IMX25_UART1_BASE_ADDR 0x43f90000 +#define IMX25_UART2_BASE_ADDR 0x43f94000 +#define IMX25_UART3_BASE_ADDR 0x5000c000 +#define IMX25_UART4_BASE_ADDR 0x50008000 +#define IMX25_UART5_BASE_ADDR 0x5002c000 +#define IMX25_UART_BASE_ADDR(n) IMX25_UART##n##_BASE_ADDR +#define IMX25_UART_BASE(n) IMX25_UART_BASE_ADDR(n) + +#define IMX31_UART1_BASE_ADDR 0x43f90000 +#define IMX31_UART2_BASE_ADDR 0x43f94000 +#define IMX31_UART3_BASE_ADDR 0x5000c000 +#define IMX31_UART4_BASE_ADDR 0x43fb0000 +#define IMX31_UART5_BASE_ADDR 0x43fb4000 +#define IMX31_UART_BASE_ADDR(n) IMX31_UART##n##_BASE_ADDR +#define IMX31_UART_BASE(n) IMX31_UART_BASE_ADDR(n) + +#define IMX35_UART1_BASE_ADDR 0x43f90000 +#define IMX35_UART2_BASE_ADDR 0x43f94000 +#define IMX35_UART3_BASE_ADDR 0x5000c000 +#define IMX35_UART_BASE_ADDR(n) IMX35_UART##n##_BASE_ADDR +#define IMX35_UART_BASE(n) IMX35_UART_BASE_ADDR(n) + +#define IMX51_UART1_BASE_ADDR 0x73fbc000 +#define IMX51_UART2_BASE_ADDR 0x73fc0000 +#define IMX51_UART3_BASE_ADDR 0x7000c000 +#define IMX51_UART_BASE_ADDR(n) IMX51_UART##n##_BASE_ADDR +#define IMX51_UART_BASE(n) IMX51_UART_BASE_ADDR(n) + +#define IMX53_UART1_BASE_ADDR 0x53fbc000 +#define IMX53_UART2_BASE_ADDR 0x53fc0000 +#define IMX53_UART3_BASE_ADDR 0x5000c000 +#define IMX53_UART4_BASE_ADDR 0x53ff0000 +#define IMX53_UART5_BASE_ADDR 0x63f90000 +#define IMX53_UART_BASE_ADDR(n) IMX53_UART##n##_BASE_ADDR +#define IMX53_UART_BASE(n) IMX53_UART_BASE_ADDR(n) + +#define IMX6Q_UART1_BASE_ADDR 0x02020000 +#define IMX6Q_UART2_BASE_ADDR 0x021e8000 +#define IMX6Q_UART3_BASE_ADDR 0x021ec000 +#define IMX6Q_UART4_BASE_ADDR 0x021f0000 +#define IMX6Q_UART5_BASE_ADDR 0x021f4000 +#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR +#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n) + +#define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT) + +#ifdef CONFIG_DEBUG_IMX1_UART +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX1) +#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX21) +#elif defined(CONFIG_DEBUG_IMX25_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX25) +#elif defined(CONFIG_DEBUG_IMX31_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX31) +#elif defined(CONFIG_DEBUG_IMX35_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX35) +#elif defined(CONFIG_DEBUG_IMX51_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX51) +#elif defined(CONFIG_DEBUG_IMX53_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX53) +#elif defined(CONFIG_DEBUG_IMX6Q_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q) +#endif + +#endif /* __DEBUG_IMX_UART_H */ diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S index 0c4e17d..619d8cc 100644 --- a/arch/arm/include/debug/imx.S +++ b/arch/arm/include/debug/imx.S @@ -10,35 +10,8 @@ * published by the Free Software Foundation. * */ -#define IMX6Q_UART1_BASE_ADDR 0x02020000 -#define IMX6Q_UART2_BASE_ADDR 0x021e8000 -#define IMX6Q_UART3_BASE_ADDR 0x021ec000 -#define IMX6Q_UART4_BASE_ADDR 0x021f0000 -#define IMX6Q_UART5_BASE_ADDR 0x021f4000 -/* - * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion - * of IMX6Q_UART##n##_BASE_ADDR. - */ -#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR -#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n) -#define IMX6Q_DEBUG_UART_BASE IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT) - -#ifdef CONFIG_DEBUG_IMX1_UART -#define UART_PADDR 0x00206000 -#elif defined (CONFIG_DEBUG_IMX25_UART) -#define UART_PADDR 0x43f90000 -#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART) -#define UART_PADDR 0x1000a000 -#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART) -#define UART_PADDR 0x43f90000 -#elif defined (CONFIG_DEBUG_IMX51_UART) -#define UART_PADDR 0x73fbc000 -#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) -#define UART_PADDR 0x53fbc000 -#elif defined (CONFIG_DEBUG_IMX6Q_UART) -#define UART_PADDR IMX6Q_DEBUG_UART_BASE -#endif +#include "imx-uart.h" /* * FIXME: This is a copy of IMX_IO_P2V in hardware.h, and needs to diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/include/debug/omap2plus.S index cfaed13..6d867ae 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/include/debug/omap2plus.S @@ -1,5 +1,4 @@ -/* arch/arm/mach-omap2/include/mach/debug-macro.S - * +/* * Debugging macro include header * * Copyright (C) 1994-1999 Russell King @@ -13,7 +12,49 @@ #include <linux/serial_reg.h> -#include <mach/serial.h> +/* OMAP2 serial ports */ +#define OMAP2_UART1_BASE 0x4806a000 +#define OMAP2_UART2_BASE 0x4806c000 +#define OMAP2_UART3_BASE 0x4806e000 + +/* OMAP3 serial ports */ +#define OMAP3_UART1_BASE OMAP2_UART1_BASE +#define OMAP3_UART2_BASE OMAP2_UART2_BASE +#define OMAP3_UART3_BASE 0x49020000 +#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ +#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ + +/* OMAP4 serial ports */ +#define OMAP4_UART1_BASE OMAP2_UART1_BASE +#define OMAP4_UART2_BASE OMAP2_UART2_BASE +#define OMAP4_UART3_BASE 0x48020000 +#define OMAP4_UART4_BASE 0x4806e000 + +/* TI81XX serial ports */ +#define TI81XX_UART1_BASE 0x48020000 +#define TI81XX_UART2_BASE 0x48022000 +#define TI81XX_UART3_BASE 0x48024000 + +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + +/* AM33XX serial port */ +#define AM33XX_UART1_BASE 0x44E09000 + +/* OMAP5 serial ports */ +#define OMAP5_UART1_BASE OMAP2_UART1_BASE +#define OMAP5_UART2_BASE OMAP2_UART2_BASE +#define OMAP5_UART3_BASE OMAP4_UART3_BASE +#define OMAP5_UART4_BASE OMAP4_UART4_BASE +#define OMAP5_UART5_BASE 0x48066000 +#define OMAP5_UART6_BASE 0x48068000 + +/* External port on Zoom2/3 */ +#define ZOOM_UART_BASE 0x10000000 +#define ZOOM_UART_VIRT 0xfa400000 + +#define OMAP_PORT_SHIFT 2 +#define ZOOM_PORT_SHIFT 1 #define UART_OFFSET(addr) ((addr) & 0x00ffffff) @@ -23,12 +64,6 @@ omap_uart_virt: .word 0 omap_uart_lsr: .word 0 .popsection - /* - * Note that this code won't work if the bootloader passes - * a wrong machine ID number in r1. To debug, just hardcode - * the desired UART phys and virt addresses temporarily into - * the omap_uart_phys and omap_uart_virt above. - */ .macro addruart, rp, rv, tmp /* Use omap_uart_phys/virt if already configured */ @@ -43,74 +78,64 @@ omap_uart_lsr: .word 0 cmpne \rv, #0 bne 100f @ already configured - /* Check the debug UART configuration set in uncompress.h */ - mov \rp, pc - ldr \rv, =OMAP_UART_INFO_OFS - and \rp, \rp, #0xff000000 - ldr \rp, [\rp, \rv] - - /* Select the UART to use based on the UART1 scratchpad value */ - cmp \rp, #0 @ no port configured? - beq 21f @ if none, try to use UART1 - cmp \rp, #OMAP2UART1 @ OMAP2/3/4UART1 - beq 21f @ configure OMAP2/3/4UART1 - cmp \rp, #OMAP2UART2 @ OMAP2/3/4UART2 - beq 22f @ configure OMAP2/3/4UART2 - cmp \rp, #OMAP2UART3 @ only on 24xx - beq 23f @ configure OMAP2UART3 - cmp \rp, #OMAP3UART3 @ only on 34xx - beq 33f @ configure OMAP3UART3 - cmp \rp, #OMAP4UART3 @ only on 44xx/54xx - beq 43f @ configure OMAP4/5UART3 - cmp \rp, #OMAP3UART4 @ only on 36xx - beq 34f @ configure OMAP3UART4 - cmp \rp, #OMAP4UART4 @ only on 44xx/54xx - beq 44f @ configure OMAP4/5UART4 - cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different - beq 81f @ configure UART1 - cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different - beq 82f @ configure UART2 - cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different - beq 83f @ configure UART3 - cmp \rp, #AM33XXUART1 @ AM33XX UART offsets different - beq 84f @ configure UART1 - cmp \rp, #ZOOM_UART @ only on zoom2/3 - beq 95f @ configure ZOOM_UART - /* Configure the UART offset from the phys/virt base */ -21: mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 +#ifdef CONFIG_DEBUG_OMAP2UART1 + mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 b 98f -22: mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 +#endif +#ifdef CONFIG_DEBUG_OMAP2UART2 + mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 b 98f -23: mov \rp, #UART_OFFSET(OMAP2_UART3_BASE) +#endif +#ifdef CONFIG_DEBUG_OMAP2UART3 + mov \rp, #UART_OFFSET(OMAP2_UART3_BASE) b 98f -33: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) +#endif +#ifdef CONFIG_DEBUG_OMAP3UART3 + mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) add \rp, \rp, #0x00fb0000 add \rp, \rp, #0x00006000 @ OMAP3_UART3_BASE b 98f -34: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) +#endif +#ifdef CONFIG_DEBUG_OMAP4UART3 + mov \rp, #UART_OFFSET(OMAP4_UART3_BASE) + b 98f +#endif +#ifdef CONFIG_DEBUG_OMAP3UART4 + mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) add \rp, \rp, #0x00fb0000 add \rp, \rp, #0x00028000 @ OMAP3_UART4_BASE b 98f -43: mov \rp, #UART_OFFSET(OMAP4_UART3_BASE) - b 98f -44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE) +#endif +#ifdef CONFIG_DEBUG_OMAP4UART4 + mov \rp, #UART_OFFSET(OMAP4_UART4_BASE) b 98f -81: mov \rp, #UART_OFFSET(TI81XX_UART1_BASE) +#endif +#ifdef CONFIG_DEBUG_TI81XXUART1 + mov \rp, #UART_OFFSET(TI81XX_UART1_BASE) b 98f -82: mov \rp, #UART_OFFSET(TI81XX_UART2_BASE) +#endif +#ifdef CONFIG_DEBUG_TI81XXUART2 + mov \rp, #UART_OFFSET(TI81XX_UART2_BASE) b 98f -83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE) +#endif +#ifdef CONFIG_DEBUG_TI81XXUART3 + mov \rp, #UART_OFFSET(TI81XX_UART3_BASE) b 98f -84: ldr \rp, =AM33XX_UART1_BASE +#endif +#ifdef CONFIG_DEBUG_AM33XXUART1 + ldr \rp, =AM33XX_UART1_BASE and \rp, \rp, #0x00ffffff b 97f -95: ldr \rp, =ZOOM_UART_BASE +#endif +#ifdef CONFIG_DEBUG_ZOOM_UART + ldr \rp, =ZOOM_UART_BASE str \rp, [\tmp, #0] @ omap_uart_phys ldr \rp, =ZOOM_UART_VIRT str \rp, [\tmp, #4] @ omap_uart_virt mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT) str \rp, [\tmp, #8] @ omap_uart_lsr +#endif b 10b /* AM33XX: Store both phys and virt address for the uart */ diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/include/debug/vt8500.S index ca292f2..0e0ca08 100644 --- a/arch/arm/mach-vt8500/include/mach/debug-macro.S +++ b/arch/arm/include/debug/vt8500.S @@ -1,20 +1,24 @@ -/* - * arch/arm/mach-vt8500/include/mach/debug-macro.S +/* + * Debugging macro include header * * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * Debugging macro include header + * Moved from arch/arm/mach-vt8500/include/mach/debug-macro.S + * Minor changes for readability. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * -*/ + */ + +#define DEBUG_LL_PHYS_BASE 0xD8000000 +#define DEBUG_LL_VIRT_BASE 0xF8000000 +#define DEBUG_LL_UART_OFFSET 0x00200000 +#if defined(CONFIG_DEBUG_VT8500_UART0) .macro addruart, rp, rv, tmp - mov \rp, #0x00200000 - orr \rv, \rp, #0xf8000000 - orr \rp, \rp, #0xd8000000 + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rv, \rp, #DEBUG_LL_VIRT_BASE + orr \rp, \rp, #DEBUG_LL_PHYS_BASE .endm .macro senduart,rd,rx @@ -29,3 +33,5 @@ .macro waituart,rd,rx .endm + +#endif diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h new file mode 100644 index 0000000..023bfeb --- /dev/null +++ b/arch/arm/include/uapi/asm/kvm.h @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ARM_KVM_H__ +#define __ARM_KVM_H__ + +#include <linux/types.h> +#include <asm/ptrace.h> + +#define __KVM_HAVE_GUEST_DEBUG +#define __KVM_HAVE_IRQ_LINE + +#define KVM_REG_SIZE(id) \ + (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) + +/* Valid for svc_regs, abt_regs, und_regs, irq_regs in struct kvm_regs */ +#define KVM_ARM_SVC_sp svc_regs[0] +#define KVM_ARM_SVC_lr svc_regs[1] +#define KVM_ARM_SVC_spsr svc_regs[2] +#define KVM_ARM_ABT_sp abt_regs[0] +#define KVM_ARM_ABT_lr abt_regs[1] +#define KVM_ARM_ABT_spsr abt_regs[2] +#define KVM_ARM_UND_sp und_regs[0] +#define KVM_ARM_UND_lr und_regs[1] +#define KVM_ARM_UND_spsr und_regs[2] +#define KVM_ARM_IRQ_sp irq_regs[0] +#define KVM_ARM_IRQ_lr irq_regs[1] +#define KVM_ARM_IRQ_spsr irq_regs[2] + +/* Valid only for fiq_regs in struct kvm_regs */ +#define KVM_ARM_FIQ_r8 fiq_regs[0] +#define KVM_ARM_FIQ_r9 fiq_regs[1] +#define KVM_ARM_FIQ_r10 fiq_regs[2] +#define KVM_ARM_FIQ_fp fiq_regs[3] +#define KVM_ARM_FIQ_ip fiq_regs[4] +#define KVM_ARM_FIQ_sp fiq_regs[5] +#define KVM_ARM_FIQ_lr fiq_regs[6] +#define KVM_ARM_FIQ_spsr fiq_regs[7] + +struct kvm_regs { + struct pt_regs usr_regs;/* R0_usr - R14_usr, PC, CPSR */ + __u32 svc_regs[3]; /* SP_svc, LR_svc, SPSR_svc */ + __u32 abt_regs[3]; /* SP_abt, LR_abt, SPSR_abt */ + __u32 und_regs[3]; /* SP_und, LR_und, SPSR_und */ + __u32 irq_regs[3]; /* SP_irq, LR_irq, SPSR_irq */ + __u32 fiq_regs[8]; /* R8_fiq - R14_fiq, SPSR_fiq */ +}; + +/* Supported Processor Types */ +#define KVM_ARM_TARGET_CORTEX_A15 0 +#define KVM_ARM_NUM_TARGETS 1 + +/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */ +#define KVM_ARM_DEVICE_TYPE_SHIFT 0 +#define KVM_ARM_DEVICE_TYPE_MASK (0xffff << KVM_ARM_DEVICE_TYPE_SHIFT) +#define KVM_ARM_DEVICE_ID_SHIFT 16 +#define KVM_ARM_DEVICE_ID_MASK (0xffff << KVM_ARM_DEVICE_ID_SHIFT) + +/* Supported device IDs */ +#define KVM_ARM_DEVICE_VGIC_V2 0 + +/* Supported VGIC address types */ +#define KVM_VGIC_V2_ADDR_TYPE_DIST 0 +#define KVM_VGIC_V2_ADDR_TYPE_CPU 1 + +#define KVM_VGIC_V2_DIST_SIZE 0x1000 +#define KVM_VGIC_V2_CPU_SIZE 0x2000 + +#define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ + +struct kvm_vcpu_init { + __u32 target; + __u32 features[7]; +}; + +struct kvm_sregs { +}; + +struct kvm_fpu { +}; + +struct kvm_guest_debug_arch { +}; + +struct kvm_debug_exit_arch { +}; + +struct kvm_sync_regs { +}; + +struct kvm_arch_memory_slot { +}; + +/* If you need to interpret the index values, here is the key: */ +#define KVM_REG_ARM_COPROC_MASK 0x000000000FFF0000 +#define KVM_REG_ARM_COPROC_SHIFT 16 +#define KVM_REG_ARM_32_OPC2_MASK 0x0000000000000007 +#define KVM_REG_ARM_32_OPC2_SHIFT 0 +#define KVM_REG_ARM_OPC1_MASK 0x0000000000000078 +#define KVM_REG_ARM_OPC1_SHIFT 3 +#define KVM_REG_ARM_CRM_MASK 0x0000000000000780 +#define KVM_REG_ARM_CRM_SHIFT 7 +#define KVM_REG_ARM_32_CRN_MASK 0x0000000000007800 +#define KVM_REG_ARM_32_CRN_SHIFT 11 + +/* Normal registers are mapped as coprocessor 16. */ +#define KVM_REG_ARM_CORE (0x0010 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_CORE_REG(name) (offsetof(struct kvm_regs, name) / 4) + +/* Some registers need more space to represent values. */ +#define KVM_REG_ARM_DEMUX (0x0011 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_DEMUX_ID_MASK 0x000000000000FF00 +#define KVM_REG_ARM_DEMUX_ID_SHIFT 8 +#define KVM_REG_ARM_DEMUX_ID_CCSIDR (0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT) +#define KVM_REG_ARM_DEMUX_VAL_MASK 0x00000000000000FF +#define KVM_REG_ARM_DEMUX_VAL_SHIFT 0 + +/* VFP registers: we could overload CP10 like ARM does, but that's ugly. */ +#define KVM_REG_ARM_VFP (0x0012 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_VFP_MASK 0x000000000000FFFF +#define KVM_REG_ARM_VFP_BASE_REG 0x0 +#define KVM_REG_ARM_VFP_FPSID 0x1000 +#define KVM_REG_ARM_VFP_FPSCR 0x1001 +#define KVM_REG_ARM_VFP_MVFR1 0x1006 +#define KVM_REG_ARM_VFP_MVFR0 0x1007 +#define KVM_REG_ARM_VFP_FPEXC 0x1008 +#define KVM_REG_ARM_VFP_FPINST 0x1009 +#define KVM_REG_ARM_VFP_FPINST2 0x100A + + +/* KVM_IRQ_LINE irq field index values */ +#define KVM_ARM_IRQ_TYPE_SHIFT 24 +#define KVM_ARM_IRQ_TYPE_MASK 0xff +#define KVM_ARM_IRQ_VCPU_SHIFT 16 +#define KVM_ARM_IRQ_VCPU_MASK 0xff +#define KVM_ARM_IRQ_NUM_SHIFT 0 +#define KVM_ARM_IRQ_NUM_MASK 0xffff + +/* irq_type field */ +#define KVM_ARM_IRQ_TYPE_CPU 0 +#define KVM_ARM_IRQ_TYPE_SPI 1 +#define KVM_ARM_IRQ_TYPE_PPI 2 + +/* out-of-kernel GIC cpu interrupt injection irq_number field */ +#define KVM_ARM_IRQ_CPU_IRQ 0 +#define KVM_ARM_IRQ_CPU_FIQ 1 + +/* Highest supported SPI, from VGIC_NR_IRQS */ +#define KVM_ARM_IRQ_GIC_MAX 127 + +/* PSCI interface */ +#define KVM_PSCI_FN_BASE 0x95c1ba5e +#define KVM_PSCI_FN(n) (KVM_PSCI_FN_BASE + (n)) + +#define KVM_PSCI_FN_CPU_SUSPEND KVM_PSCI_FN(0) +#define KVM_PSCI_FN_CPU_OFF KVM_PSCI_FN(1) +#define KVM_PSCI_FN_CPU_ON KVM_PSCI_FN(2) +#define KVM_PSCI_FN_MIGRATE KVM_PSCI_FN(3) + +#define KVM_PSCI_RET_SUCCESS 0 +#define KVM_PSCI_RET_NI ((unsigned long)-1) +#define KVM_PSCI_RET_INVAL ((unsigned long)-2) +#define KVM_PSCI_RET_DENIED ((unsigned long)-3) + +#endif /* __ARM_KVM_H__ */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 5bbec7b..5f3338e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -82,5 +82,6 @@ obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o +obj-$(CONFIG_ARM_PSCI) += psci.o extra-y := $(head-y) vmlinux.lds diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index c8ef207..d957a51 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -9,516 +9,53 @@ * published by the Free Software Foundation. */ #include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/smp.h> -#include <linux/cpu.h> -#include <linux/jiffies.h> -#include <linux/clockchips.h> -#include <linux/interrupt.h> -#include <linux/of_irq.h> -#include <linux/io.h> +#include <linux/types.h> +#include <linux/errno.h> -#include <asm/cputype.h> #include <asm/delay.h> -#include <asm/localtimer.h> -#include <asm/arch_timer.h> -#include <asm/system_info.h> #include <asm/sched_clock.h> -static unsigned long arch_timer_rate; +#include <clocksource/arm_arch_timer.h> -enum ppi_nr { - PHYS_SECURE_PPI, - PHYS_NONSECURE_PPI, - VIRT_PPI, - HYP_PPI, - MAX_TIMER_PPI -}; - -static int arch_timer_ppi[MAX_TIMER_PPI]; - -static struct clock_event_device __percpu **arch_timer_evt; -static struct delay_timer arch_delay_timer; - -static bool arch_timer_use_virtual = true; - -/* - * Architected system timer support. - */ - -#define ARCH_TIMER_CTRL_ENABLE (1 << 0) -#define ARCH_TIMER_CTRL_IT_MASK (1 << 1) -#define ARCH_TIMER_CTRL_IT_STAT (1 << 2) - -#define ARCH_TIMER_REG_CTRL 0 -#define ARCH_TIMER_REG_FREQ 1 -#define ARCH_TIMER_REG_TVAL 2 - -#define ARCH_TIMER_PHYS_ACCESS 0 -#define ARCH_TIMER_VIRT_ACCESS 1 - -/* - * These register accessors are marked inline so the compiler can - * nicely work out which register we want, and chuck away the rest of - * the code. At least it does so with a recent GCC (4.6.3). - */ -static inline void arch_timer_reg_write(const int access, const int reg, u32 val) -{ - if (access == ARCH_TIMER_PHYS_ACCESS) { - switch (reg) { - case ARCH_TIMER_REG_CTRL: - asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val)); - break; - case ARCH_TIMER_REG_TVAL: - asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); - break; - } - } - - if (access == ARCH_TIMER_VIRT_ACCESS) { - switch (reg) { - case ARCH_TIMER_REG_CTRL: - asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val)); - break; - case ARCH_TIMER_REG_TVAL: - asm volatile("mcr p15, 0, %0, c14, c3, 0" : : "r" (val)); - break; - } - } - - isb(); -} - -static inline u32 arch_timer_reg_read(const int access, const int reg) -{ - u32 val = 0; - - if (access == ARCH_TIMER_PHYS_ACCESS) { - switch (reg) { - case ARCH_TIMER_REG_CTRL: - asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val)); - break; - case ARCH_TIMER_REG_TVAL: - asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); - break; - case ARCH_TIMER_REG_FREQ: - asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val)); - break; - } - } - - if (access == ARCH_TIMER_VIRT_ACCESS) { - switch (reg) { - case ARCH_TIMER_REG_CTRL: - asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val)); - break; - case ARCH_TIMER_REG_TVAL: - asm volatile("mrc p15, 0, %0, c14, c3, 0" : "=r" (val)); - break; - } - } - - return val; -} - -static inline cycle_t arch_timer_counter_read(const int access) -{ - cycle_t cval = 0; - - if (access == ARCH_TIMER_PHYS_ACCESS) - asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval)); - - if (access == ARCH_TIMER_VIRT_ACCESS) - asm volatile("mrrc p15, 1, %Q0, %R0, c14" : "=r" (cval)); - - return cval; -} - -static inline cycle_t arch_counter_get_cntpct(void) -{ - return arch_timer_counter_read(ARCH_TIMER_PHYS_ACCESS); -} - -static inline cycle_t arch_counter_get_cntvct(void) -{ - return arch_timer_counter_read(ARCH_TIMER_VIRT_ACCESS); -} - -static irqreturn_t inline timer_handler(const int access, - struct clock_event_device *evt) -{ - unsigned long ctrl; - ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); - if (ctrl & ARCH_TIMER_CTRL_IT_STAT) { - ctrl |= ARCH_TIMER_CTRL_IT_MASK; - arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); - evt->event_handler(evt); - return IRQ_HANDLED; - } - - return IRQ_NONE; -} - -static irqreturn_t arch_timer_handler_virt(int irq, void *dev_id) -{ - struct clock_event_device *evt = *(struct clock_event_device **)dev_id; - - return timer_handler(ARCH_TIMER_VIRT_ACCESS, evt); -} - -static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id) -{ - struct clock_event_device *evt = *(struct clock_event_device **)dev_id; - - return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt); -} - -static inline void timer_set_mode(const int access, int mode) -{ - unsigned long ctrl; - switch (mode) { - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); - ctrl &= ~ARCH_TIMER_CTRL_ENABLE; - arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); - break; - default: - break; - } -} - -static void arch_timer_set_mode_virt(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode); -} - -static void arch_timer_set_mode_phys(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode); -} - -static inline void set_next_event(const int access, unsigned long evt) -{ - unsigned long ctrl; - ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); - ctrl |= ARCH_TIMER_CTRL_ENABLE; - ctrl &= ~ARCH_TIMER_CTRL_IT_MASK; - arch_timer_reg_write(access, ARCH_TIMER_REG_TVAL, evt); - arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); -} - -static int arch_timer_set_next_event_virt(unsigned long evt, - struct clock_event_device *unused) -{ - set_next_event(ARCH_TIMER_VIRT_ACCESS, evt); - return 0; -} - -static int arch_timer_set_next_event_phys(unsigned long evt, - struct clock_event_device *unused) -{ - set_next_event(ARCH_TIMER_PHYS_ACCESS, evt); - return 0; -} - -static int __cpuinit arch_timer_setup(struct clock_event_device *clk) -{ - clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; - clk->name = "arch_sys_timer"; - clk->rating = 450; - if (arch_timer_use_virtual) { - clk->irq = arch_timer_ppi[VIRT_PPI]; - clk->set_mode = arch_timer_set_mode_virt; - clk->set_next_event = arch_timer_set_next_event_virt; - } else { - clk->irq = arch_timer_ppi[PHYS_SECURE_PPI]; - clk->set_mode = arch_timer_set_mode_phys; - clk->set_next_event = arch_timer_set_next_event_phys; - } - - clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, NULL); - - clockevents_config_and_register(clk, arch_timer_rate, - 0xf, 0x7fffffff); - - *__this_cpu_ptr(arch_timer_evt) = clk; - - if (arch_timer_use_virtual) - enable_percpu_irq(arch_timer_ppi[VIRT_PPI], 0); - else { - enable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], 0); - if (arch_timer_ppi[PHYS_NONSECURE_PPI]) - enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0); - } - - return 0; -} - -/* Is the optional system timer available? */ -static int local_timer_is_architected(void) -{ - return (cpu_architecture() >= CPU_ARCH_ARMv7) && - ((read_cpuid_ext(CPUID_EXT_PFR1) >> 16) & 0xf) == 1; -} - -static int arch_timer_available(void) -{ - unsigned long freq; - - if (!local_timer_is_architected()) - return -ENXIO; - - if (arch_timer_rate == 0) { - freq = arch_timer_reg_read(ARCH_TIMER_PHYS_ACCESS, - ARCH_TIMER_REG_FREQ); - - /* Check the timer frequency. */ - if (freq == 0) { - pr_warn("Architected timer frequency not available\n"); - return -EINVAL; - } - - arch_timer_rate = freq; - } - - pr_info_once("Architected local timer running at %lu.%02luMHz (%s).\n", - arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100, - arch_timer_use_virtual ? "virt" : "phys"); - return 0; -} - -static u32 notrace arch_counter_get_cntpct32(void) -{ - cycle_t cnt = arch_counter_get_cntpct(); - - /* - * The sched_clock infrastructure only knows about counters - * with at most 32bits. Forget about the upper 24 bits for the - * time being... - */ - return (u32)cnt; -} - -static u32 notrace arch_counter_get_cntvct32(void) -{ - cycle_t cnt = arch_counter_get_cntvct(); - - /* - * The sched_clock infrastructure only knows about counters - * with at most 32bits. Forget about the upper 24 bits for the - * time being... - */ - return (u32)cnt; -} - -static cycle_t arch_counter_read(struct clocksource *cs) -{ - /* - * Always use the physical counter for the clocksource. - * CNTHCTL.PL1PCTEN must be set to 1. - */ - return arch_counter_get_cntpct(); -} - -static unsigned long arch_timer_read_current_timer(void) +static unsigned long arch_timer_read_counter_long(void) { - return arch_counter_get_cntpct(); + return arch_timer_read_counter(); } -static cycle_t arch_counter_read_cc(const struct cyclecounter *cc) +static u32 arch_timer_read_counter_u32(void) { - /* - * Always use the physical counter for the clocksource. - * CNTHCTL.PL1PCTEN must be set to 1. - */ - return arch_counter_get_cntpct(); + return arch_timer_read_counter(); } -static struct clocksource clocksource_counter = { - .name = "arch_sys_counter", - .rating = 400, - .read = arch_counter_read, - .mask = CLOCKSOURCE_MASK(56), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static struct cyclecounter cyclecounter = { - .read = arch_counter_read_cc, - .mask = CLOCKSOURCE_MASK(56), -}; - -static struct timecounter timecounter; - -struct timecounter *arch_timer_get_timecounter(void) -{ - return &timecounter; -} - -static void __cpuinit arch_timer_stop(struct clock_event_device *clk) -{ - pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n", - clk->irq, smp_processor_id()); - - if (arch_timer_use_virtual) - disable_percpu_irq(arch_timer_ppi[VIRT_PPI]); - else { - disable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI]); - if (arch_timer_ppi[PHYS_NONSECURE_PPI]) - disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]); - } - - clk->set_mode(CLOCK_EVT_MODE_UNUSED, clk); -} - -static struct local_timer_ops arch_timer_ops __cpuinitdata = { - .setup = arch_timer_setup, - .stop = arch_timer_stop, -}; - -static struct clock_event_device arch_timer_global_evt; +static struct delay_timer arch_delay_timer; -static int __init arch_timer_register(void) +static void __init arch_timer_delay_timer_register(void) { - int err; - int ppi; - - err = arch_timer_available(); - if (err) - goto out; - - arch_timer_evt = alloc_percpu(struct clock_event_device *); - if (!arch_timer_evt) { - err = -ENOMEM; - goto out; - } - - clocksource_register_hz(&clocksource_counter, arch_timer_rate); - cyclecounter.mult = clocksource_counter.mult; - cyclecounter.shift = clocksource_counter.shift; - timecounter_init(&timecounter, &cyclecounter, - arch_counter_get_cntpct()); - - if (arch_timer_use_virtual) { - ppi = arch_timer_ppi[VIRT_PPI]; - err = request_percpu_irq(ppi, arch_timer_handler_virt, - "arch_timer", arch_timer_evt); - } else { - ppi = arch_timer_ppi[PHYS_SECURE_PPI]; - err = request_percpu_irq(ppi, arch_timer_handler_phys, - "arch_timer", arch_timer_evt); - if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) { - ppi = arch_timer_ppi[PHYS_NONSECURE_PPI]; - err = request_percpu_irq(ppi, arch_timer_handler_phys, - "arch_timer", arch_timer_evt); - if (err) - free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], - arch_timer_evt); - } - } - - if (err) { - pr_err("arch_timer: can't register interrupt %d (%d)\n", - ppi, err); - goto out_free; - } - - err = local_timer_register(&arch_timer_ops); - if (err) { - /* - * We couldn't register as a local timer (could be - * because we're on a UP platform, or because some - * other local timer is already present...). Try as a - * global timer instead. - */ - arch_timer_global_evt.cpumask = cpumask_of(0); - err = arch_timer_setup(&arch_timer_global_evt); - } - if (err) - goto out_free_irq; - /* Use the architected timer for the delay loop. */ - arch_delay_timer.read_current_timer = &arch_timer_read_current_timer; - arch_delay_timer.freq = arch_timer_rate; + arch_delay_timer.read_current_timer = arch_timer_read_counter_long; + arch_delay_timer.freq = arch_timer_get_rate(); register_current_timer_delay(&arch_delay_timer); - return 0; - -out_free_irq: - if (arch_timer_use_virtual) - free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt); - else { - free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], - arch_timer_evt); - if (arch_timer_ppi[PHYS_NONSECURE_PPI]) - free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], - arch_timer_evt); - } - -out_free: - free_percpu(arch_timer_evt); -out: - return err; } -static const struct of_device_id arch_timer_of_match[] __initconst = { - { .compatible = "arm,armv7-timer", }, - {}, -}; - int __init arch_timer_of_register(void) { - struct device_node *np; - u32 freq; - int i; - - np = of_find_matching_node(NULL, arch_timer_of_match); - if (!np) { - pr_err("arch_timer: can't find DT node\n"); - return -ENODEV; - } - - /* Try to determine the frequency from the device tree or CNTFRQ */ - if (!of_property_read_u32(np, "clock-frequency", &freq)) - arch_timer_rate = freq; - - for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) - arch_timer_ppi[i] = irq_of_parse_and_map(np, i); + int ret; - /* - * If no interrupt provided for virtual timer, we'll have to - * stick to the physical timer. It'd better be accessible... - */ - if (!arch_timer_ppi[VIRT_PPI]) { - arch_timer_use_virtual = false; + ret = arch_timer_init(); + if (ret) + return ret; - if (!arch_timer_ppi[PHYS_SECURE_PPI] || - !arch_timer_ppi[PHYS_NONSECURE_PPI]) { - pr_warn("arch_timer: No interrupt available, giving up\n"); - return -EINVAL; - } - } + arch_timer_delay_timer_register(); - return arch_timer_register(); + return 0; } int __init arch_timer_sched_clock_init(void) { - u32 (*cnt32)(void); - int err; - - err = arch_timer_available(); - if (err) - return err; - - if (arch_timer_use_virtual) - cnt32 = arch_counter_get_cntvct32; - else - cnt32 = arch_counter_get_cntpct32; + if (arch_timer_get_rate() == 0) + return -ENXIO; - setup_sched_clock(cnt32, 32, arch_timer_rate); + setup_sched_clock(arch_timer_read_counter_u32, + 32, arch_timer_get_rate()); return 0; } diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index c985b48..5ce738b 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -13,6 +13,9 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/dma-mapping.h> +#ifdef CONFIG_KVM_ARM_HOST +#include <linux/kvm_host.h> +#endif #include <asm/cacheflush.h> #include <asm/glue-df.h> #include <asm/glue-pf.h> @@ -146,5 +149,45 @@ int main(void) DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL); DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE); DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE); +#ifdef CONFIG_KVM_ARM_HOST + DEFINE(VCPU_KVM, offsetof(struct kvm_vcpu, kvm)); + DEFINE(VCPU_MIDR, offsetof(struct kvm_vcpu, arch.midr)); + DEFINE(VCPU_CP15, offsetof(struct kvm_vcpu, arch.cp15)); + DEFINE(VCPU_VFP_GUEST, offsetof(struct kvm_vcpu, arch.vfp_guest)); + DEFINE(VCPU_VFP_HOST, offsetof(struct kvm_vcpu, arch.vfp_host)); + DEFINE(VCPU_REGS, offsetof(struct kvm_vcpu, arch.regs)); + DEFINE(VCPU_USR_REGS, offsetof(struct kvm_vcpu, arch.regs.usr_regs)); + DEFINE(VCPU_SVC_REGS, offsetof(struct kvm_vcpu, arch.regs.svc_regs)); + DEFINE(VCPU_ABT_REGS, offsetof(struct kvm_vcpu, arch.regs.abt_regs)); + DEFINE(VCPU_UND_REGS, offsetof(struct kvm_vcpu, arch.regs.und_regs)); + DEFINE(VCPU_IRQ_REGS, offsetof(struct kvm_vcpu, arch.regs.irq_regs)); + DEFINE(VCPU_FIQ_REGS, offsetof(struct kvm_vcpu, arch.regs.fiq_regs)); + DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_pc)); + DEFINE(VCPU_CPSR, offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_cpsr)); + DEFINE(VCPU_IRQ_LINES, offsetof(struct kvm_vcpu, arch.irq_lines)); + DEFINE(VCPU_HSR, offsetof(struct kvm_vcpu, arch.hsr)); + DEFINE(VCPU_HxFAR, offsetof(struct kvm_vcpu, arch.hxfar)); + DEFINE(VCPU_HPFAR, offsetof(struct kvm_vcpu, arch.hpfar)); + DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.hyp_pc)); +#ifdef CONFIG_KVM_ARM_VGIC + DEFINE(VCPU_VGIC_CPU, offsetof(struct kvm_vcpu, arch.vgic_cpu)); + DEFINE(VGIC_CPU_HCR, offsetof(struct vgic_cpu, vgic_hcr)); + DEFINE(VGIC_CPU_VMCR, offsetof(struct vgic_cpu, vgic_vmcr)); + DEFINE(VGIC_CPU_MISR, offsetof(struct vgic_cpu, vgic_misr)); + DEFINE(VGIC_CPU_EISR, offsetof(struct vgic_cpu, vgic_eisr)); + DEFINE(VGIC_CPU_ELRSR, offsetof(struct vgic_cpu, vgic_elrsr)); + DEFINE(VGIC_CPU_APR, offsetof(struct vgic_cpu, vgic_apr)); + DEFINE(VGIC_CPU_LR, offsetof(struct vgic_cpu, vgic_lr)); + DEFINE(VGIC_CPU_NR_LR, offsetof(struct vgic_cpu, nr_lr)); +#ifdef CONFIG_KVM_ARM_TIMER + DEFINE(VCPU_TIMER_CNTV_CTL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_ctl)); + DEFINE(VCPU_TIMER_CNTV_CVAL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_cval)); + DEFINE(KVM_TIMER_CNTVOFF, offsetof(struct kvm, arch.timer.cntvoff)); + DEFINE(KVM_TIMER_ENABLED, offsetof(struct kvm, arch.timer.enabled)); +#endif + DEFINE(KVM_VGIC_VCTRL, offsetof(struct kvm, arch.vgic.vctrl_base)); +#endif + DEFINE(KVM_VTTBR, offsetof(struct kvm, arch.vttbr)); +#endif return 0; } diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 379cf32..a1f73b5 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -413,7 +413,7 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) return irq; } -static int __init pcibios_init_resources(int busnr, struct pci_sys_data *sys) +static int pcibios_init_resources(int busnr, struct pci_sys_data *sys) { int ret; struct pci_host_bridge_window *window; @@ -445,7 +445,7 @@ static int __init pcibios_init_resources(int busnr, struct pci_sys_data *sys) return 0; } -static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) +static void pcibios_init_hw(struct hw_pci *hw, struct list_head *head) { struct pci_sys_data *sys = NULL; int ret; @@ -464,6 +464,9 @@ static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) sys->map_irq = hw->map_irq; INIT_LIST_HEAD(&sys->resources); + if (hw->private_data) + sys->private_data = hw->private_data[nr]; + ret = hw->setup(nr, sys); if (ret > 0) { @@ -493,7 +496,7 @@ static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) } } -void __init pci_common_init(struct hw_pci *hw) +void pci_common_init(struct hw_pci *hw) { struct pci_sys_data *sys; LIST_HEAD(head); diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index a4fda4e..0cc5761 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -195,7 +195,7 @@ CALL(sys_getcwd) CALL(sys_capget) /* 185 */ CALL(sys_capset) - CALL(sys_sigaltstack_wrapper) + CALL(sys_sigaltstack) CALL(sys_sendfile) CALL(sys_ni_syscall) /* getpmsg */ CALL(sys_ni_syscall) /* putpmsg */ diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index a6c301e..3248cde 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -514,11 +514,6 @@ sys_rt_sigreturn_wrapper: b sys_rt_sigreturn ENDPROC(sys_rt_sigreturn_wrapper) -sys_sigaltstack_wrapper: - ldr r2, [sp, #S_OFF + S_SP] - b do_sigaltstack -ENDPROC(sys_sigaltstack_wrapper) - sys_statfs64_wrapper: teq r1, #88 moveq r1, #84 diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 5ff2e77..5eae53e 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -28,6 +28,7 @@ #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/smp.h> +#include <linux/cpu_pm.h> #include <asm/cacheflush.h> #include <asm/cputype.h> @@ -35,6 +36,7 @@ #include <asm/hw_breakpoint.h> #include <asm/kdebug.h> #include <asm/traps.h> +#include <asm/hardware/coresight.h> /* Breakpoint currently in use for each BRP. */ static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]); @@ -49,6 +51,9 @@ static int core_num_wrps; /* Debug architecture version. */ static u8 debug_arch; +/* Does debug architecture support OS Save and Restore? */ +static bool has_ossr; + /* Maximum supported watchpoint length. */ static u8 max_watchpoint_len; @@ -903,6 +908,23 @@ static struct undef_hook debug_reg_hook = { .fn = debug_reg_trap, }; +/* Does this core support OS Save and Restore? */ +static bool core_has_os_save_restore(void) +{ + u32 oslsr; + + switch (get_debug_arch()) { + case ARM_DEBUG_ARCH_V7_1: + return true; + case ARM_DEBUG_ARCH_V7_ECP14: + ARM_DBG_READ(c1, c1, 4, oslsr); + if (oslsr & ARM_OSLSR_OSLM0) + return true; + default: + return false; + } +} + static void reset_ctrl_regs(void *unused) { int i, raw_num_brps, err = 0, cpu = smp_processor_id(); @@ -930,11 +952,7 @@ static void reset_ctrl_regs(void *unused) if ((val & 0x1) == 0) err = -EPERM; - /* - * Check whether we implement OS save and restore. - */ - ARM_DBG_READ(c1, c1, 4, val); - if ((val & 0x9) == 0) + if (!has_ossr) goto clear_vcr; break; case ARM_DEBUG_ARCH_V7_1: @@ -955,9 +973,9 @@ static void reset_ctrl_regs(void *unused) /* * Unconditionally clear the OS lock by writing a value - * other than 0xC5ACCE55 to the access register. + * other than CS_LAR_KEY to the access register. */ - ARM_DBG_WRITE(c1, c0, 4, 0); + ARM_DBG_WRITE(c1, c0, 4, ~CS_LAR_KEY); isb(); /* @@ -1015,6 +1033,30 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = { .notifier_call = dbg_reset_notify, }; +#ifdef CONFIG_CPU_PM +static int dbg_cpu_pm_notify(struct notifier_block *self, unsigned long action, + void *v) +{ + if (action == CPU_PM_EXIT) + reset_ctrl_regs(NULL); + + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata dbg_cpu_pm_nb = { + .notifier_call = dbg_cpu_pm_notify, +}; + +static void __init pm_init(void) +{ + cpu_pm_register_notifier(&dbg_cpu_pm_nb); +} +#else +static inline void pm_init(void) +{ +} +#endif + static int __init arch_hw_breakpoint_init(void) { debug_arch = get_debug_arch(); @@ -1024,6 +1066,8 @@ static int __init arch_hw_breakpoint_init(void) return 0; } + has_ossr = core_has_os_save_restore(); + /* Determine how many BRPs/WRPs are available. */ core_num_brps = get_num_brps(); core_num_wrps = get_num_wrps(); @@ -1062,8 +1106,9 @@ static int __init arch_hw_breakpoint_init(void) hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT, "breakpoint debug exception"); - /* Register hotplug notifier. */ + /* Register hotplug and PM notifiers. */ register_cpu_notifier(&dbg_reset_nb); + pm_init(); return 0; } arch_initcall(arch_hw_breakpoint_init); diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 8961650..8e4ef4c 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -117,6 +117,16 @@ void __init init_IRQ(void) machine_desc->init_irq(); } +#ifdef CONFIG_MULTI_IRQ_HANDLER +void __init set_handle_irq(void (*handle_irq)(struct pt_regs *)) +{ + if (handle_arch_irq) + return; + + handle_arch_irq = handle_irq; +} +#endif + #ifdef CONFIG_SPARSE_IRQ int __init arch_probe_nr_irqs(void) { diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index f9e8657..31e0eb3 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -149,12 +149,6 @@ again: static void armpmu_read(struct perf_event *event) { - struct hw_perf_event *hwc = &event->hw; - - /* Don't read disabled counters! */ - if (hwc->idx < 0) - return; - armpmu_event_update(event); } @@ -207,8 +201,6 @@ armpmu_del(struct perf_event *event, int flags) struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; - WARN_ON(idx < 0); - armpmu_stop(event, PERF_EF_UPDATE); hw_events->events[idx] = NULL; clear_bit(idx, hw_events->used_mask); @@ -358,7 +350,7 @@ __hw_perf_event_init(struct perf_event *event) { struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct hw_perf_event *hwc = &event->hw; - int mapping, err; + int mapping; mapping = armpmu->map_event(event); @@ -407,14 +399,12 @@ __hw_perf_event_init(struct perf_event *event) local64_set(&hwc->period_left, hwc->sample_period); } - err = 0; if (event->group_leader != event) { - err = validate_group(event); - if (err) + if (validate_group(event) != 0); return -EINVAL; } - return err; + return 0; } static int armpmu_event_init(struct perf_event *event) diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 5f66206..1f2740e 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -147,7 +147,7 @@ static void cpu_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->free_irq = cpu_pmu_free_irq; /* Ensure the PMU has sane values out of reset. */ - if (cpu_pmu && cpu_pmu->reset) + if (cpu_pmu->reset) on_each_cpu(cpu_pmu->reset, cpu_pmu, 1); } @@ -201,48 +201,46 @@ static struct platform_device_id cpu_pmu_plat_device_ids[] = { static int probe_current_pmu(struct arm_pmu *pmu) { int cpu = get_cpu(); - unsigned long cpuid = read_cpuid_id(); - unsigned long implementor = (cpuid & 0xFF000000) >> 24; - unsigned long part_number = (cpuid & 0xFFF0); + unsigned long implementor = read_cpuid_implementor(); + unsigned long part_number = read_cpuid_part_number(); int ret = -ENODEV; pr_info("probing PMU on CPU %d\n", cpu); /* ARM Ltd CPUs. */ - if (0x41 == implementor) { + if (implementor == ARM_CPU_IMP_ARM) { switch (part_number) { - case 0xB360: /* ARM1136 */ - case 0xB560: /* ARM1156 */ - case 0xB760: /* ARM1176 */ + case ARM_CPU_PART_ARM1136: + case ARM_CPU_PART_ARM1156: + case ARM_CPU_PART_ARM1176: ret = armv6pmu_init(pmu); break; - case 0xB020: /* ARM11mpcore */ + case ARM_CPU_PART_ARM11MPCORE: ret = armv6mpcore_pmu_init(pmu); break; - case 0xC080: /* Cortex-A8 */ + case ARM_CPU_PART_CORTEX_A8: ret = armv7_a8_pmu_init(pmu); break; - case 0xC090: /* Cortex-A9 */ + case ARM_CPU_PART_CORTEX_A9: ret = armv7_a9_pmu_init(pmu); break; - case 0xC050: /* Cortex-A5 */ + case ARM_CPU_PART_CORTEX_A5: ret = armv7_a5_pmu_init(pmu); break; - case 0xC0F0: /* Cortex-A15 */ + case ARM_CPU_PART_CORTEX_A15: ret = armv7_a15_pmu_init(pmu); break; - case 0xC070: /* Cortex-A7 */ + case ARM_CPU_PART_CORTEX_A7: ret = armv7_a7_pmu_init(pmu); break; } /* Intel CPUs [xscale]. */ - } else if (0x69 == implementor) { - part_number = (cpuid >> 13) & 0x7; - switch (part_number) { - case 1: + } else if (implementor == ARM_CPU_IMP_INTEL) { + switch (xscale_cpu_arch_version()) { + case ARM_CPU_XSCALE_ARCH_V1: ret = xscale1pmu_init(pmu); break; - case 2: + case ARM_CPU_XSCALE_ARCH_V2: ret = xscale2pmu_init(pmu); break; } @@ -279,17 +277,22 @@ static int cpu_pmu_device_probe(struct platform_device *pdev) } if (ret) { - pr_info("failed to register PMU devices!"); - kfree(pmu); - return ret; + pr_info("failed to probe PMU!"); + goto out_free; } cpu_pmu = pmu; cpu_pmu->plat_device = pdev; cpu_pmu_init(cpu_pmu); - armpmu_register(cpu_pmu, PERF_TYPE_RAW); + ret = armpmu_register(cpu_pmu, PERF_TYPE_RAW); - return 0; + if (!ret) + return 0; + +out_free: + pr_info("failed to register PMU devices!"); + kfree(pmu); + return ret; } static struct platform_driver cpu_pmu_driver = { diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 041d052..03664b0 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -106,7 +106,7 @@ static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -259,7 +259,7 @@ static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 4fbc757..8c79a9e 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -157,8 +157,8 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -282,7 +282,7 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -399,8 +399,8 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, /* * The prefetch counters don't differentiate between the I @@ -527,8 +527,8 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, @@ -651,8 +651,8 @@ static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 2b0fe30..63990c4 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -83,7 +83,7 @@ static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, [C(OP_WRITE)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, [C(OP_PREFETCH)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index c6dec5f..047d3e4 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -172,14 +172,9 @@ static void default_idle(void) local_irq_enable(); } -void (*pm_idle)(void) = default_idle; -EXPORT_SYMBOL(pm_idle); - /* - * The idle thread, has rather strange semantics for calling pm_idle, - * but this is what x86 does and we need to do the same, so that - * things like cpuidle get called in the same way. The only difference - * is that we always respect 'hlt_counter' to prevent low power idle. + * The idle thread. + * We always respect 'hlt_counter' to prevent low power idle. */ void cpu_idle(void) { @@ -210,10 +205,10 @@ void cpu_idle(void) } else if (!need_resched()) { stop_critical_timings(); if (cpuidle_idle_call()) - pm_idle(); + default_idle(); start_critical_timings(); /* - * pm_idle functions must always + * default_idle functions must always * return with IRQs enabled. */ WARN_ON(irqs_disabled()); diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c new file mode 100644 index 0000000..3653164 --- /dev/null +++ b/arch/arm/kernel/psci.c @@ -0,0 +1,211 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +#define pr_fmt(fmt) "psci: " fmt + +#include <linux/init.h> +#include <linux/of.h> + +#include <asm/compiler.h> +#include <asm/errno.h> +#include <asm/opcodes-sec.h> +#include <asm/opcodes-virt.h> +#include <asm/psci.h> + +struct psci_operations psci_ops; + +static int (*invoke_psci_fn)(u32, u32, u32, u32); + +enum psci_function { + PSCI_FN_CPU_SUSPEND, + PSCI_FN_CPU_ON, + PSCI_FN_CPU_OFF, + PSCI_FN_MIGRATE, + PSCI_FN_MAX, +}; + +static u32 psci_function_id[PSCI_FN_MAX]; + +#define PSCI_RET_SUCCESS 0 +#define PSCI_RET_EOPNOTSUPP -1 +#define PSCI_RET_EINVAL -2 +#define PSCI_RET_EPERM -3 + +static int psci_to_linux_errno(int errno) +{ + switch (errno) { + case PSCI_RET_SUCCESS: + return 0; + case PSCI_RET_EOPNOTSUPP: + return -EOPNOTSUPP; + case PSCI_RET_EINVAL: + return -EINVAL; + case PSCI_RET_EPERM: + return -EPERM; + }; + + return -EINVAL; +} + +#define PSCI_POWER_STATE_ID_MASK 0xffff +#define PSCI_POWER_STATE_ID_SHIFT 0 +#define PSCI_POWER_STATE_TYPE_MASK 0x1 +#define PSCI_POWER_STATE_TYPE_SHIFT 16 +#define PSCI_POWER_STATE_AFFL_MASK 0x3 +#define PSCI_POWER_STATE_AFFL_SHIFT 24 + +static u32 psci_power_state_pack(struct psci_power_state state) +{ + return ((state.id & PSCI_POWER_STATE_ID_MASK) + << PSCI_POWER_STATE_ID_SHIFT) | + ((state.type & PSCI_POWER_STATE_TYPE_MASK) + << PSCI_POWER_STATE_TYPE_SHIFT) | + ((state.affinity_level & PSCI_POWER_STATE_AFFL_MASK) + << PSCI_POWER_STATE_AFFL_SHIFT); +} + +/* + * The following two functions are invoked via the invoke_psci_fn pointer + * and will not be inlined, allowing us to piggyback on the AAPCS. + */ +static noinline int __invoke_psci_fn_hvc(u32 function_id, u32 arg0, u32 arg1, + u32 arg2) +{ + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r1") + __asmeq("%2", "r2") + __asmeq("%3", "r3") + __HVC(0) + : "+r" (function_id) + : "r" (arg0), "r" (arg1), "r" (arg2)); + + return function_id; +} + +static noinline int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, + u32 arg2) +{ + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r1") + __asmeq("%2", "r2") + __asmeq("%3", "r3") + __SMC(0) + : "+r" (function_id) + : "r" (arg0), "r" (arg1), "r" (arg2)); + + return function_id; +} + +static int psci_cpu_suspend(struct psci_power_state state, + unsigned long entry_point) +{ + int err; + u32 fn, power_state; + + fn = psci_function_id[PSCI_FN_CPU_SUSPEND]; + power_state = psci_power_state_pack(state); + err = invoke_psci_fn(fn, power_state, entry_point, 0); + return psci_to_linux_errno(err); +} + +static int psci_cpu_off(struct psci_power_state state) +{ + int err; + u32 fn, power_state; + + fn = psci_function_id[PSCI_FN_CPU_OFF]; + power_state = psci_power_state_pack(state); + err = invoke_psci_fn(fn, power_state, 0, 0); + return psci_to_linux_errno(err); +} + +static int psci_cpu_on(unsigned long cpuid, unsigned long entry_point) +{ + int err; + u32 fn; + + fn = psci_function_id[PSCI_FN_CPU_ON]; + err = invoke_psci_fn(fn, cpuid, entry_point, 0); + return psci_to_linux_errno(err); +} + +static int psci_migrate(unsigned long cpuid) +{ + int err; + u32 fn; + + fn = psci_function_id[PSCI_FN_MIGRATE]; + err = invoke_psci_fn(fn, cpuid, 0, 0); + return psci_to_linux_errno(err); +} + +static const struct of_device_id psci_of_match[] __initconst = { + { .compatible = "arm,psci", }, + {}, +}; + +static int __init psci_init(void) +{ + struct device_node *np; + const char *method; + u32 id; + + np = of_find_matching_node(NULL, psci_of_match); + if (!np) + return 0; + + pr_info("probing function IDs from device-tree\n"); + + if (of_property_read_string(np, "method", &method)) { + pr_warning("missing \"method\" property\n"); + goto out_put_node; + } + + if (!strcmp("hvc", method)) { + invoke_psci_fn = __invoke_psci_fn_hvc; + } else if (!strcmp("smc", method)) { + invoke_psci_fn = __invoke_psci_fn_smc; + } else { + pr_warning("invalid \"method\" property: %s\n", method); + goto out_put_node; + } + + if (!of_property_read_u32(np, "cpu_suspend", &id)) { + psci_function_id[PSCI_FN_CPU_SUSPEND] = id; + psci_ops.cpu_suspend = psci_cpu_suspend; + } + + if (!of_property_read_u32(np, "cpu_off", &id)) { + psci_function_id[PSCI_FN_CPU_OFF] = id; + psci_ops.cpu_off = psci_cpu_off; + } + + if (!of_property_read_u32(np, "cpu_on", &id)) { + psci_function_id[PSCI_FN_CPU_ON] = id; + psci_ops.cpu_on = psci_cpu_on; + } + + if (!of_property_read_u32(np, "migrate", &id)) { + psci_function_id[PSCI_FN_MIGRATE] = id; + psci_ops.migrate = psci_migrate; + } + +out_put_node: + of_node_put(np); + return 0; +} +early_initcall(psci_init); diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index fc6692e..bd6f56b 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -93,11 +93,11 @@ static void notrace update_sched_clock(void) * detectable in cyc_to_fixed_sched_clock(). */ raw_local_irq_save(flags); - cd.epoch_cyc = cyc; + cd.epoch_cyc_copy = cyc; smp_wmb(); cd.epoch_ns = ns; smp_wmb(); - cd.epoch_cyc_copy = cyc; + cd.epoch_cyc = cyc; raw_local_irq_restore(flags); } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 56f72d2..296786b 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -45,48 +45,6 @@ const unsigned long sigreturn_codes[7] = { MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN, }; -/* - * atomically swap in the new signal mask, and wait for a signal. - */ -asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask) -{ - sigset_t blocked; - siginitset(&blocked, mask); - return sigsuspend(&blocked); -} - -asmlinkage int -sys_sigaction(int sig, const struct old_sigaction __user *act, - struct old_sigaction __user *oact) -{ - struct k_sigaction new_ka, old_ka; - int ret; - - if (act) { - old_sigset_t mask; - if (!access_ok(VERIFY_READ, act, sizeof(*act)) || - __get_user(new_ka.sa.sa_handler, &act->sa_handler) || - __get_user(new_ka.sa.sa_restorer, &act->sa_restorer) || - __get_user(new_ka.sa.sa_flags, &act->sa_flags) || - __get_user(mask, &act->sa_mask)) - return -EFAULT; - siginitset(&new_ka.sa.sa_mask, mask); - } - - ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); - - if (!ret && oact) { - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || - __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || - __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) || - __put_user(old_ka.sa.sa_flags, &oact->sa_flags) || - __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask)) - return -EFAULT; - } - - return ret; -} - #ifdef CONFIG_CRUNCH static int preserve_crunch_context(struct crunch_sigframe __user *frame) { @@ -300,7 +258,7 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) if (restore_sigframe(regs, &frame->sig)) goto badframe; - if (do_sigaltstack(&frame->sig.uc.uc_stack, NULL, regs->ARM_sp) == -EFAULT) + if (restore_altstack(&frame->sig.uc.uc_stack)) goto badframe; return regs->ARM_r0; @@ -360,18 +318,12 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set) } static inline void __user * -get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, int framesize) +get_sigframe(struct ksignal *ksig, struct pt_regs *regs, int framesize) { - unsigned long sp = regs->ARM_sp; + unsigned long sp = sigsp(regs->ARM_sp, ksig); void __user *frame; /* - * This is the X/Open sanctioned signal stack switching. - */ - if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp)) - sp = current->sas_ss_sp + current->sas_ss_size; - - /* * ATPCS B01 mandates 8-byte alignment */ frame = (void __user *)((sp - framesize) & ~7); @@ -385,11 +337,22 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, int framesize) return frame; } +/* + * translate the signal + */ +static inline int map_sig(int sig) +{ + struct thread_info *thread = current_thread_info(); + if (sig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap) + sig = thread->exec_domain->signal_invmap[sig]; + return sig; +} + static int -setup_return(struct pt_regs *regs, struct k_sigaction *ka, - unsigned long __user *rc, void __user *frame, int usig) +setup_return(struct pt_regs *regs, struct ksignal *ksig, + unsigned long __user *rc, void __user *frame) { - unsigned long handler = (unsigned long)ka->sa.sa_handler; + unsigned long handler = (unsigned long)ksig->ka.sa.sa_handler; unsigned long retcode; int thumb = 0; unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT); @@ -399,7 +362,7 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, /* * Maybe we need to deliver a 32-bit signal to a 26-bit task. */ - if (ka->sa.sa_flags & SA_THIRTYTWO) + if (ksig->ka.sa.sa_flags & SA_THIRTYTWO) cpsr = (cpsr & ~MODE_MASK) | USR_MODE; #ifdef CONFIG_ARM_THUMB @@ -421,12 +384,12 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, } #endif - if (ka->sa.sa_flags & SA_RESTORER) { - retcode = (unsigned long)ka->sa.sa_restorer; + if (ksig->ka.sa.sa_flags & SA_RESTORER) { + retcode = (unsigned long)ksig->ka.sa.sa_restorer; } else { unsigned int idx = thumb << 1; - if (ka->sa.sa_flags & SA_SIGINFO) + if (ksig->ka.sa.sa_flags & SA_SIGINFO) idx += 3; if (__put_user(sigreturn_codes[idx], rc) || @@ -451,7 +414,7 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, } } - regs->ARM_r0 = usig; + regs->ARM_r0 = map_sig(ksig->sig); regs->ARM_sp = (unsigned long)frame; regs->ARM_lr = retcode; regs->ARM_pc = handler; @@ -461,9 +424,9 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, } static int -setup_frame(int usig, struct k_sigaction *ka, sigset_t *set, struct pt_regs *regs) +setup_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) { - struct sigframe __user *frame = get_sigframe(ka, regs, sizeof(*frame)); + struct sigframe __user *frame = get_sigframe(ksig, regs, sizeof(*frame)); int err = 0; if (!frame) @@ -476,36 +439,29 @@ setup_frame(int usig, struct k_sigaction *ka, sigset_t *set, struct pt_regs *reg err |= setup_sigframe(frame, regs, set); if (err == 0) - err = setup_return(regs, ka, frame->retcode, frame, usig); + err = setup_return(regs, ksig, frame->retcode, frame); return err; } static int -setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs *regs) +setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) { - struct rt_sigframe __user *frame = get_sigframe(ka, regs, sizeof(*frame)); - stack_t stack; + struct rt_sigframe __user *frame = get_sigframe(ksig, regs, sizeof(*frame)); int err = 0; if (!frame) return 1; - err |= copy_siginfo_to_user(&frame->info, info); + err |= copy_siginfo_to_user(&frame->info, &ksig->info); __put_user_error(0, &frame->sig.uc.uc_flags, err); __put_user_error(NULL, &frame->sig.uc.uc_link, err); - memset(&stack, 0, sizeof(stack)); - stack.ss_sp = (void __user *)current->sas_ss_sp; - stack.ss_flags = sas_ss_flags(regs->ARM_sp); - stack.ss_size = current->sas_ss_size; - err |= __copy_to_user(&frame->sig.uc.uc_stack, &stack, sizeof(stack)); - + err |= __save_altstack(&frame->sig.uc.uc_stack, regs->ARM_sp); err |= setup_sigframe(&frame->sig, regs, set); if (err == 0) - err = setup_return(regs, ka, frame->sig.retcode, frame, usig); + err = setup_return(regs, ksig, frame->sig.retcode, frame); if (err == 0) { /* @@ -523,40 +479,25 @@ setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info, /* * OK, we're invoking a handler */ -static void -handle_signal(unsigned long sig, struct k_sigaction *ka, - siginfo_t *info, struct pt_regs *regs) +static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) { - struct thread_info *thread = current_thread_info(); - struct task_struct *tsk = current; sigset_t *oldset = sigmask_to_save(); - int usig = sig; int ret; /* - * translate the signal - */ - if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap) - usig = thread->exec_domain->signal_invmap[usig]; - - /* * Set up the stack frame */ - if (ka->sa.sa_flags & SA_SIGINFO) - ret = setup_rt_frame(usig, ka, info, oldset, regs); + if (ksig->ka.sa.sa_flags & SA_SIGINFO) + ret = setup_rt_frame(ksig, oldset, regs); else - ret = setup_frame(usig, ka, oldset, regs); + ret = setup_frame(ksig, oldset, regs); /* * Check that the resulting registers are actually sane. */ ret |= !valid_user_regs(regs); - if (ret != 0) { - force_sigsegv(sig, tsk); - return; - } - signal_delivered(sig, info, ka, regs, 0); + signal_setup_done(ret, ksig, 0); } /* @@ -571,9 +512,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, static int do_signal(struct pt_regs *regs, int syscall) { unsigned int retval = 0, continue_addr = 0, restart_addr = 0; - struct k_sigaction ka; - siginfo_t info; - int signr; + struct ksignal ksig; int restart = 0; /* @@ -605,33 +544,32 @@ static int do_signal(struct pt_regs *regs, int syscall) * Get the signal to deliver. When running under ptrace, at this * point the debugger may change all our registers ... */ - signr = get_signal_to_deliver(&info, &ka, regs, NULL); /* * Depending on the signal settings we may need to revert the * decision to restart the system call. But skip this if a * debugger has chosen to restart at a different PC. */ - if (regs->ARM_pc != restart_addr) - restart = 0; - if (signr > 0) { - if (unlikely(restart)) { + if (get_signal(&ksig)) { + /* handler */ + if (unlikely(restart) && regs->ARM_pc == restart_addr) { if (retval == -ERESTARTNOHAND || retval == -ERESTART_RESTARTBLOCK || (retval == -ERESTARTSYS - && !(ka.sa.sa_flags & SA_RESTART))) { + && !(ksig.ka.sa.sa_flags & SA_RESTART))) { regs->ARM_r0 = -EINTR; regs->ARM_pc = continue_addr; } } - - handle_signal(signr, &ka, &info, regs); - return 0; + handle_signal(&ksig, regs); + } else { + /* no handler */ + restore_saved_sigmask(); + if (unlikely(restart) && regs->ARM_pc == restart_addr) { + regs->ARM_pc = continue_addr; + return restart; + } } - - restore_saved_sigmask(); - if (unlikely(restart)) - regs->ARM_pc = continue_addr; - return restart; + return 0; } asmlinkage int diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 84f4cbf..5f73f70 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -125,18 +125,6 @@ void __init smp_init_cpus(void) smp_ops.smp_init_cpus(); } -static void __init platform_smp_prepare_cpus(unsigned int max_cpus) -{ - if (smp_ops.smp_prepare_cpus) - smp_ops.smp_prepare_cpus(max_cpus); -} - -static void __cpuinit platform_secondary_init(unsigned int cpu) -{ - if (smp_ops.smp_secondary_init) - smp_ops.smp_secondary_init(cpu); -} - int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { if (smp_ops.smp_boot_secondary) @@ -154,12 +142,6 @@ static int platform_cpu_kill(unsigned int cpu) return 1; } -static void platform_cpu_die(unsigned int cpu) -{ - if (smp_ops.cpu_die) - smp_ops.cpu_die(cpu); -} - static int platform_cpu_disable(unsigned int cpu) { if (smp_ops.cpu_disable) @@ -257,7 +239,8 @@ void __ref cpu_die(void) * actual CPU shutdown procedure is at least platform (if not * CPU) specific. */ - platform_cpu_die(cpu); + if (smp_ops.cpu_die) + smp_ops.cpu_die(cpu); /* * Do not return to the idle loop - jump back to the secondary @@ -324,7 +307,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void) /* * Give the platform a chance to do its own initialisation. */ - platform_secondary_init(cpu); + if (smp_ops.smp_secondary_init) + smp_ops.smp_secondary_init(cpu); notify_cpu_starting(cpu); @@ -399,8 +383,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. A platform should - * re-initialize the map in platform_smp_prepare_cpus() if - * present != possible (e.g. physical hotplug). + * re-initialize the map in the platforms smp_prepare_cpus() + * if present != possible (e.g. physical hotplug). */ init_cpu_present(cpu_possible_mask); @@ -408,7 +392,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * Initialise the SCU if there are more than one CPU * and let them know where to start. */ - platform_smp_prepare_cpus(max_cpus); + if (smp_ops.smp_prepare_cpus) + smp_ops.smp_prepare_cpus(max_cpus); } } @@ -416,7 +401,8 @@ static void (*smp_cross_call)(const struct cpumask *, unsigned int); void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int)) { - smp_cross_call = fn; + if (!smp_cross_call) + smp_cross_call = fn; } void arch_send_call_function_ipi_mask(const struct cpumask *mask) @@ -475,14 +461,8 @@ u64 smp_irq_stat_cpu(unsigned int cpu) */ static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent); -static void ipi_timer(void) -{ - struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent); - evt->event_handler(evt); -} - #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST -static void smp_timer_broadcast(const struct cpumask *mask) +void tick_broadcast(const struct cpumask *mask) { smp_cross_call(mask, IPI_TIMER); } @@ -530,7 +510,6 @@ static void __cpuinit percpu_timer_setup(void) struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); evt->cpumask = cpumask_of(cpu); - evt->broadcast = smp_timer_broadcast; if (!lt_ops || lt_ops->setup(evt)) broadcast_timer_setup(evt); @@ -596,11 +575,13 @@ void handle_IPI(int ipinr, struct pt_regs *regs) case IPI_WAKEUP: break; +#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST case IPI_TIMER: irq_enter(); - ipi_timer(); + tick_receive_broadcast(); irq_exit(); break; +#endif case IPI_RESCHEDULE: scheduler_ipi(); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 49f335d..c092115 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -24,14 +24,12 @@ #include <asm/smp_twd.h> #include <asm/localtimer.h> -#include <asm/hardware/gic.h> /* set up by the platform code */ static void __iomem *twd_base; static struct clk *twd_clk; static unsigned long twd_timer_rate; -static bool common_setup_called; static DEFINE_PER_CPU(bool, percpu_setup_called); static struct clock_event_device __percpu **twd_evt; @@ -239,25 +237,28 @@ static irqreturn_t twd_handler(int irq, void *dev_id) return IRQ_NONE; } -static struct clk *twd_get_clock(void) +static void twd_get_clock(struct device_node *np) { - struct clk *clk; int err; - clk = clk_get_sys("smp_twd", NULL); - if (IS_ERR(clk)) { - pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk)); - return clk; + if (np) + twd_clk = of_clk_get(np, 0); + else + twd_clk = clk_get_sys("smp_twd", NULL); + + if (IS_ERR(twd_clk)) { + pr_err("smp_twd: clock not found %d\n", (int) PTR_ERR(twd_clk)); + return; } - err = clk_prepare_enable(clk); + err = clk_prepare_enable(twd_clk); if (err) { pr_err("smp_twd: clock failed to prepare+enable: %d\n", err); - clk_put(clk); - return ERR_PTR(err); + clk_put(twd_clk); + return; } - return clk; + twd_timer_rate = clk_get_rate(twd_clk); } /* @@ -280,26 +281,7 @@ static int __cpuinit twd_timer_setup(struct clock_event_device *clk) } per_cpu(percpu_setup_called, cpu) = true; - /* - * This stuff only need to be done once for the entire TWD cluster - * during the runtime of the system. - */ - if (!common_setup_called) { - twd_clk = twd_get_clock(); - - /* - * We use IS_ERR_OR_NULL() here, because if the clock stubs - * are active we will get a valid clk reference which is - * however NULL and will return the rate 0. In that case we - * need to calibrate the rate instead. - */ - if (!IS_ERR_OR_NULL(twd_clk)) - twd_timer_rate = clk_get_rate(twd_clk); - else - twd_calibrate_rate(); - - common_setup_called = true; - } + twd_calibrate_rate(); /* * The following is done once per CPU the first time .setup() is @@ -330,7 +312,7 @@ static struct local_timer_ops twd_lt_ops __cpuinitdata = { .stop = twd_timer_stop, }; -static int __init twd_local_timer_common_register(void) +static int __init twd_local_timer_common_register(struct device_node *np) { int err; @@ -350,6 +332,8 @@ static int __init twd_local_timer_common_register(void) if (err) goto out_irq; + twd_get_clock(np); + return 0; out_irq: @@ -373,7 +357,7 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt) if (!twd_base) return -ENOMEM; - return twd_local_timer_common_register(); + return twd_local_timer_common_register(NULL); } #ifdef CONFIG_OF @@ -405,7 +389,7 @@ void __init twd_local_timer_of_register(void) goto out; } - err = twd_local_timer_common_register(); + err = twd_local_timer_common_register(np); out: WARN(err, "twd_local_timer_of_register failed (%d)\n", err); diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 09be0c3..955d92d 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -21,7 +21,6 @@ #include <linux/timex.h> #include <linux/errno.h> #include <linux/profile.h> -#include <linux/syscore_ops.h> #include <linux/timer.h> #include <linux/irq.h> @@ -31,11 +30,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -/* - * Our system timer. - */ -static struct sys_timer *system_timer; - #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \ defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) /* this needs a better home */ @@ -69,16 +63,6 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); #endif -#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET -u32 arch_gettimeoffset(void) -{ - if (system_timer->offset != NULL) - return system_timer->offset() * 1000; - - return 0; -} -#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */ - #ifndef CONFIG_GENERIC_CLOCKEVENTS /* * Kernel system timer support. @@ -129,43 +113,8 @@ int __init register_persistent_clock(clock_access_fn read_boot, return -EINVAL; } -#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS) -static int timer_suspend(void) -{ - if (system_timer->suspend) - system_timer->suspend(); - - return 0; -} - -static void timer_resume(void) -{ - if (system_timer->resume) - system_timer->resume(); -} -#else -#define timer_suspend NULL -#define timer_resume NULL -#endif - -static struct syscore_ops timer_syscore_ops = { - .suspend = timer_suspend, - .resume = timer_resume, -}; - -static int __init timer_init_syscore_ops(void) -{ - register_syscore_ops(&timer_syscore_ops); - - return 0; -} - -device_initcall(timer_init_syscore_ops); - void __init time_init(void) { - system_timer = machine_desc->timer; - system_timer->init(); + machine_desc->init_time(); sched_clock_postinit(); } - diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index b0179b8..1c08911 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -296,7 +296,7 @@ static void oops_end(unsigned long flags, struct pt_regs *regs, int signr) bust_spinlocks(0); die_owner = -1; - add_taint(TAINT_DIE); + add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE); die_nest_count--; if (!die_nest_count) /* Nest count reaches zero, release the lock. */ diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 11c1785..b571484 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -19,7 +19,11 @@ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__idmap_text_start) = .; \ *(.idmap.text) \ - VMLINUX_SYMBOL(__idmap_text_end) = .; + VMLINUX_SYMBOL(__idmap_text_end) = .; \ + ALIGN_FUNCTION(); \ + VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \ + *(.hyp.idmap.text) \ + VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; #ifdef CONFIG_HOTPLUG_CPU #define ARM_CPU_DISCARD(x) diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig new file mode 100644 index 0000000..49dd64e --- /dev/null +++ b/arch/arm/kvm/Kconfig @@ -0,0 +1,72 @@ +# +# KVM configuration +# + +source "virt/kvm/Kconfig" + +menuconfig VIRTUALIZATION + bool "Virtualization" + ---help--- + Say Y here to get to see options for using your Linux host to run + other operating systems inside virtual machines (guests). + This option alone does not add any kernel code. + + If you say N, all options in this submenu will be skipped and + disabled. + +if VIRTUALIZATION + +config KVM + bool "Kernel-based Virtual Machine (KVM) support" + select PREEMPT_NOTIFIERS + select ANON_INODES + select KVM_MMIO + select KVM_ARM_HOST + depends on ARM_VIRT_EXT && ARM_LPAE + ---help--- + Support hosting virtualized guest machines. You will also + need to select one or more of the processor modules below. + + This module provides access to the hardware capabilities through + a character device node named /dev/kvm. + + If unsure, say N. + +config KVM_ARM_HOST + bool "KVM host support for ARM cpus." + depends on KVM + depends on MMU + select MMU_NOTIFIER + ---help--- + Provides host support for ARM processors. + +config KVM_ARM_MAX_VCPUS + int "Number maximum supported virtual CPUs per VM" + depends on KVM_ARM_HOST + default 4 + help + Static number of max supported virtual CPUs per VM. + + If you choose a high number, the vcpu structures will be quite + large, so only choose a reasonable number that you expect to + actually use. + +config KVM_ARM_VGIC + bool "KVM support for Virtual GIC" + depends on KVM_ARM_HOST && OF + select HAVE_KVM_IRQCHIP + default y + ---help--- + Adds support for a hardware assisted, in-kernel GIC emulation. + +config KVM_ARM_TIMER + bool "KVM support for Architected Timers" + depends on KVM_ARM_VGIC && ARM_ARCH_TIMER + select HAVE_KVM_IRQCHIP + default y + ---help--- + Adds support for the Architected Timers in virtual machines + +source drivers/virtio/Kconfig + +endif # VIRTUALIZATION diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile new file mode 100644 index 0000000..fc96ce6 --- /dev/null +++ b/arch/arm/kvm/Makefile @@ -0,0 +1,23 @@ +# +# Makefile for Kernel-based Virtual Machine module +# + +plus_virt := $(call as-instr,.arch_extension virt,+virt) +ifeq ($(plus_virt),+virt) + plus_virt_def := -DREQUIRES_VIRT=1 +endif + +ccflags-y += -Ivirt/kvm -Iarch/arm/kvm +CFLAGS_arm.o := -I. $(plus_virt_def) +CFLAGS_mmu.o := -I. + +AFLAGS_init.o := -Wa,-march=armv7-a$(plus_virt) +AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt) + +kvm-arm-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o) + +obj-y += kvm-arm.o init.o interrupts.o +obj-y += arm.o guest.o mmu.o emulate.o reset.o +obj-y += coproc.o coproc_a15.o mmio.o psci.o +obj-$(CONFIG_KVM_ARM_VGIC) += vgic.o +obj-$(CONFIG_KVM_ARM_TIMER) += arch_timer.o diff --git a/arch/arm/kvm/arch_timer.c b/arch/arm/kvm/arch_timer.c new file mode 100644 index 0000000..6ac938d --- /dev/null +++ b/arch/arm/kvm/arch_timer.c @@ -0,0 +1,271 @@ +/* + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/cpu.h> +#include <linux/of_irq.h> +#include <linux/kvm.h> +#include <linux/kvm_host.h> +#include <linux/interrupt.h> + +#include <asm/arch_timer.h> + +#include <asm/kvm_vgic.h> +#include <asm/kvm_arch_timer.h> + +static struct timecounter *timecounter; +static struct workqueue_struct *wqueue; +static struct kvm_irq_level timer_irq = { + .level = 1, +}; + +static cycle_t kvm_phys_timer_read(void) +{ + return timecounter->cc->read(timecounter->cc); +} + +static bool timer_is_armed(struct arch_timer_cpu *timer) +{ + return timer->armed; +} + +/* timer_arm: as in "arm the timer", not as in ARM the company */ +static void timer_arm(struct arch_timer_cpu *timer, u64 ns) +{ + timer->armed = true; + hrtimer_start(&timer->timer, ktime_add_ns(ktime_get(), ns), + HRTIMER_MODE_ABS); +} + +static void timer_disarm(struct arch_timer_cpu *timer) +{ + if (timer_is_armed(timer)) { + hrtimer_cancel(&timer->timer); + cancel_work_sync(&timer->expired); + timer->armed = false; + } +} + +static void kvm_timer_inject_irq(struct kvm_vcpu *vcpu) +{ + struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu; + + timer->cntv_ctl |= 1 << 1; /* Mask the interrupt in the guest */ + kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id, + vcpu->arch.timer_cpu.irq->irq, + vcpu->arch.timer_cpu.irq->level); +} + +static irqreturn_t kvm_arch_timer_handler(int irq, void *dev_id) +{ + struct kvm_vcpu *vcpu = *(struct kvm_vcpu **)dev_id; + + /* + * We disable the timer in the world switch and let it be + * handled by kvm_timer_sync_hwstate(). Getting a timer + * interrupt at this point is a sure sign of some major + * breakage. + */ + pr_warn("Unexpected interrupt %d on vcpu %p\n", irq, vcpu); + return IRQ_HANDLED; +} + +static void kvm_timer_inject_irq_work(struct work_struct *work) +{ + struct kvm_vcpu *vcpu; + + vcpu = container_of(work, struct kvm_vcpu, arch.timer_cpu.expired); + vcpu->arch.timer_cpu.armed = false; + kvm_timer_inject_irq(vcpu); +} + +static enum hrtimer_restart kvm_timer_expire(struct hrtimer *hrt) +{ + struct arch_timer_cpu *timer; + timer = container_of(hrt, struct arch_timer_cpu, timer); + queue_work(wqueue, &timer->expired); + return HRTIMER_NORESTART; +} + +/** + * kvm_timer_flush_hwstate - prepare to move the virt timer to the cpu + * @vcpu: The vcpu pointer + * + * Disarm any pending soft timers, since the world-switch code will write the + * virtual timer state back to the physical CPU. + */ +void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu) +{ + struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu; + + /* + * We're about to run this vcpu again, so there is no need to + * keep the background timer running, as we're about to + * populate the CPU timer again. + */ + timer_disarm(timer); +} + +/** + * kvm_timer_sync_hwstate - sync timer state from cpu + * @vcpu: The vcpu pointer + * + * Check if the virtual timer was armed and either schedule a corresponding + * soft timer or inject directly if already expired. + */ +void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu) +{ + struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu; + cycle_t cval, now; + u64 ns; + + /* Check if the timer is enabled and unmasked first */ + if ((timer->cntv_ctl & 3) != 1) + return; + + cval = timer->cntv_cval; + now = kvm_phys_timer_read() - vcpu->kvm->arch.timer.cntvoff; + + BUG_ON(timer_is_armed(timer)); + + if (cval <= now) { + /* + * Timer has already expired while we were not + * looking. Inject the interrupt and carry on. + */ + kvm_timer_inject_irq(vcpu); + return; + } + + ns = cyclecounter_cyc2ns(timecounter->cc, cval - now); + timer_arm(timer, ns); +} + +void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu) +{ + struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu; + + INIT_WORK(&timer->expired, kvm_timer_inject_irq_work); + hrtimer_init(&timer->timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); + timer->timer.function = kvm_timer_expire; + timer->irq = &timer_irq; +} + +static void kvm_timer_init_interrupt(void *info) +{ + enable_percpu_irq(timer_irq.irq, 0); +} + + +static int kvm_timer_cpu_notify(struct notifier_block *self, + unsigned long action, void *cpu) +{ + switch (action) { + case CPU_STARTING: + case CPU_STARTING_FROZEN: + kvm_timer_init_interrupt(NULL); + break; + case CPU_DYING: + case CPU_DYING_FROZEN: + disable_percpu_irq(timer_irq.irq); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block kvm_timer_cpu_nb = { + .notifier_call = kvm_timer_cpu_notify, +}; + +static const struct of_device_id arch_timer_of_match[] = { + { .compatible = "arm,armv7-timer", }, + {}, +}; + +int kvm_timer_hyp_init(void) +{ + struct device_node *np; + unsigned int ppi; + int err; + + timecounter = arch_timer_get_timecounter(); + if (!timecounter) + return -ENODEV; + + np = of_find_matching_node(NULL, arch_timer_of_match); + if (!np) { + kvm_err("kvm_arch_timer: can't find DT node\n"); + return -ENODEV; + } + + ppi = irq_of_parse_and_map(np, 2); + if (!ppi) { + kvm_err("kvm_arch_timer: no virtual timer interrupt\n"); + err = -EINVAL; + goto out; + } + + err = request_percpu_irq(ppi, kvm_arch_timer_handler, + "kvm guest timer", kvm_get_running_vcpus()); + if (err) { + kvm_err("kvm_arch_timer: can't request interrupt %d (%d)\n", + ppi, err); + goto out; + } + + timer_irq.irq = ppi; + + err = register_cpu_notifier(&kvm_timer_cpu_nb); + if (err) { + kvm_err("Cannot register timer CPU notifier\n"); + goto out_free; + } + + wqueue = create_singlethread_workqueue("kvm_arch_timer"); + if (!wqueue) { + err = -ENOMEM; + goto out_free; + } + + kvm_info("%s IRQ%d\n", np->name, ppi); + on_each_cpu(kvm_timer_init_interrupt, NULL, 1); + + goto out; +out_free: + free_percpu_irq(ppi, kvm_get_running_vcpus()); +out: + of_node_put(np); + return err; +} + +void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu) +{ + struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu; + + timer_disarm(timer); +} + +int kvm_timer_init(struct kvm *kvm) +{ + if (timecounter && wqueue) { + kvm->arch.timer.cntvoff = kvm_phys_timer_read(); + kvm->arch.timer.enabled = 1; + } + + return 0; +} diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c new file mode 100644 index 0000000..5a93698 --- /dev/null +++ b/arch/arm/kvm/arm.c @@ -0,0 +1,1169 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/kvm_host.h> +#include <linux/module.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <linux/mman.h> +#include <linux/sched.h> +#include <linux/kvm.h> +#include <trace/events/kvm.h> + +#define CREATE_TRACE_POINTS +#include "trace.h" + +#include <asm/unified.h> +#include <asm/uaccess.h> +#include <asm/ptrace.h> +#include <asm/mman.h> +#include <asm/cputype.h> +#include <asm/tlbflush.h> +#include <asm/cacheflush.h> +#include <asm/virt.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_mmu.h> +#include <asm/kvm_emulate.h> +#include <asm/kvm_coproc.h> +#include <asm/kvm_psci.h> +#include <asm/opcodes.h> + +#ifdef REQUIRES_VIRT +__asm__(".arch_extension virt"); +#endif + +static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page); +static struct vfp_hard_struct __percpu *kvm_host_vfp_state; +static unsigned long hyp_default_vectors; + +/* Per-CPU variable containing the currently running vcpu. */ +static DEFINE_PER_CPU(struct kvm_vcpu *, kvm_arm_running_vcpu); + +/* The VMID used in the VTTBR */ +static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1); +static u8 kvm_next_vmid; +static DEFINE_SPINLOCK(kvm_vmid_lock); + +static bool vgic_present; + +static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu) +{ + BUG_ON(preemptible()); + __get_cpu_var(kvm_arm_running_vcpu) = vcpu; +} + +/** + * kvm_arm_get_running_vcpu - get the vcpu running on the current CPU. + * Must be called from non-preemptible context + */ +struct kvm_vcpu *kvm_arm_get_running_vcpu(void) +{ + BUG_ON(preemptible()); + return __get_cpu_var(kvm_arm_running_vcpu); +} + +/** + * kvm_arm_get_running_vcpus - get the per-CPU array of currently running vcpus. + */ +struct kvm_vcpu __percpu **kvm_get_running_vcpus(void) +{ + return &kvm_arm_running_vcpu; +} + +int kvm_arch_hardware_enable(void *garbage) +{ + return 0; +} + +int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_exiting_guest_mode(vcpu) == IN_GUEST_MODE; +} + +void kvm_arch_hardware_disable(void *garbage) +{ +} + +int kvm_arch_hardware_setup(void) +{ + return 0; +} + +void kvm_arch_hardware_unsetup(void) +{ +} + +void kvm_arch_check_processor_compat(void *rtn) +{ + *(int *)rtn = 0; +} + +void kvm_arch_sync_events(struct kvm *kvm) +{ +} + +/** + * kvm_arch_init_vm - initializes a VM data structure + * @kvm: pointer to the KVM struct + */ +int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) +{ + int ret = 0; + + if (type) + return -EINVAL; + + ret = kvm_alloc_stage2_pgd(kvm); + if (ret) + goto out_fail_alloc; + + ret = create_hyp_mappings(kvm, kvm + 1); + if (ret) + goto out_free_stage2_pgd; + + /* Mark the initial VMID generation invalid */ + kvm->arch.vmid_gen = 0; + + return ret; +out_free_stage2_pgd: + kvm_free_stage2_pgd(kvm); +out_fail_alloc: + return ret; +} + +int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) +{ + return VM_FAULT_SIGBUS; +} + +void kvm_arch_free_memslot(struct kvm_memory_slot *free, + struct kvm_memory_slot *dont) +{ +} + +int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages) +{ + return 0; +} + +/** + * kvm_arch_destroy_vm - destroy the VM data structure + * @kvm: pointer to the KVM struct + */ +void kvm_arch_destroy_vm(struct kvm *kvm) +{ + int i; + + kvm_free_stage2_pgd(kvm); + + for (i = 0; i < KVM_MAX_VCPUS; ++i) { + if (kvm->vcpus[i]) { + kvm_arch_vcpu_free(kvm->vcpus[i]); + kvm->vcpus[i] = NULL; + } + } +} + +int kvm_dev_ioctl_check_extension(long ext) +{ + int r; + switch (ext) { + case KVM_CAP_IRQCHIP: + r = vgic_present; + break; + case KVM_CAP_USER_MEMORY: + case KVM_CAP_SYNC_MMU: + case KVM_CAP_DESTROY_MEMORY_REGION_WORKS: + case KVM_CAP_ONE_REG: + case KVM_CAP_ARM_PSCI: + r = 1; + break; + case KVM_CAP_COALESCED_MMIO: + r = KVM_COALESCED_MMIO_PAGE_OFFSET; + break; + case KVM_CAP_ARM_SET_DEVICE_ADDR: + r = 1; + case KVM_CAP_NR_VCPUS: + r = num_online_cpus(); + break; + case KVM_CAP_MAX_VCPUS: + r = KVM_MAX_VCPUS; + break; + default: + r = 0; + break; + } + return r; +} + +long kvm_arch_dev_ioctl(struct file *filp, + unsigned int ioctl, unsigned long arg) +{ + return -EINVAL; +} + +int kvm_arch_set_memory_region(struct kvm *kvm, + struct kvm_userspace_memory_region *mem, + struct kvm_memory_slot old, + int user_alloc) +{ + return 0; +} + +int kvm_arch_prepare_memory_region(struct kvm *kvm, + struct kvm_memory_slot *memslot, + struct kvm_memory_slot old, + struct kvm_userspace_memory_region *mem, + bool user_alloc) +{ + return 0; +} + +void kvm_arch_commit_memory_region(struct kvm *kvm, + struct kvm_userspace_memory_region *mem, + struct kvm_memory_slot old, + bool user_alloc) +{ +} + +void kvm_arch_flush_shadow_all(struct kvm *kvm) +{ +} + +void kvm_arch_flush_shadow_memslot(struct kvm *kvm, + struct kvm_memory_slot *slot) +{ +} + +struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) +{ + int err; + struct kvm_vcpu *vcpu; + + vcpu = kmem_cache_zalloc(kvm_vcpu_cache, GFP_KERNEL); + if (!vcpu) { + err = -ENOMEM; + goto out; + } + + err = kvm_vcpu_init(vcpu, kvm, id); + if (err) + goto free_vcpu; + + err = create_hyp_mappings(vcpu, vcpu + 1); + if (err) + goto vcpu_uninit; + + return vcpu; +vcpu_uninit: + kvm_vcpu_uninit(vcpu); +free_vcpu: + kmem_cache_free(kvm_vcpu_cache, vcpu); +out: + return ERR_PTR(err); +} + +int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu) +{ + return 0; +} + +void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) +{ + kvm_mmu_free_memory_caches(vcpu); + kvm_timer_vcpu_terminate(vcpu); + kmem_cache_free(kvm_vcpu_cache, vcpu); +} + +void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) +{ + kvm_arch_vcpu_free(vcpu); +} + +int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) +{ + return 0; +} + +int __attribute_const__ kvm_target_cpu(void) +{ + unsigned long implementor = read_cpuid_implementor(); + unsigned long part_number = read_cpuid_part_number(); + + if (implementor != ARM_CPU_IMP_ARM) + return -EINVAL; + + switch (part_number) { + case ARM_CPU_PART_CORTEX_A15: + return KVM_ARM_TARGET_CORTEX_A15; + default: + return -EINVAL; + } +} + +int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) +{ + int ret; + + /* Force users to call KVM_ARM_VCPU_INIT */ + vcpu->arch.target = -1; + + /* Set up VGIC */ + ret = kvm_vgic_vcpu_init(vcpu); + if (ret) + return ret; + + /* Set up the timer */ + kvm_timer_vcpu_init(vcpu); + + return 0; +} + +void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) +{ +} + +void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) +{ + vcpu->cpu = cpu; + vcpu->arch.vfp_host = this_cpu_ptr(kvm_host_vfp_state); + + /* + * Check whether this vcpu requires the cache to be flushed on + * this physical CPU. This is a consequence of doing dcache + * operations by set/way on this vcpu. We do it here to be in + * a non-preemptible section. + */ + if (cpumask_test_and_clear_cpu(cpu, &vcpu->arch.require_dcache_flush)) + flush_cache_all(); /* We'd really want v7_flush_dcache_all() */ + + kvm_arm_set_running_vcpu(vcpu); +} + +void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) +{ + kvm_arm_set_running_vcpu(NULL); +} + +int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, + struct kvm_guest_debug *dbg) +{ + return -EINVAL; +} + + +int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, + struct kvm_mp_state *mp_state) +{ + return -EINVAL; +} + +int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, + struct kvm_mp_state *mp_state) +{ + return -EINVAL; +} + +/** + * kvm_arch_vcpu_runnable - determine if the vcpu can be scheduled + * @v: The VCPU pointer + * + * If the guest CPU is not waiting for interrupts or an interrupt line is + * asserted, the CPU is by definition runnable. + */ +int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) +{ + return !!v->arch.irq_lines || kvm_vgic_vcpu_pending_irq(v); +} + +/* Just ensure a guest exit from a particular CPU */ +static void exit_vm_noop(void *info) +{ +} + +void force_vm_exit(const cpumask_t *mask) +{ + smp_call_function_many(mask, exit_vm_noop, NULL, true); +} + +/** + * need_new_vmid_gen - check that the VMID is still valid + * @kvm: The VM's VMID to checkt + * + * return true if there is a new generation of VMIDs being used + * + * The hardware supports only 256 values with the value zero reserved for the + * host, so we check if an assigned value belongs to a previous generation, + * which which requires us to assign a new value. If we're the first to use a + * VMID for the new generation, we must flush necessary caches and TLBs on all + * CPUs. + */ +static bool need_new_vmid_gen(struct kvm *kvm) +{ + return unlikely(kvm->arch.vmid_gen != atomic64_read(&kvm_vmid_gen)); +} + +/** + * update_vttbr - Update the VTTBR with a valid VMID before the guest runs + * @kvm The guest that we are about to run + * + * Called from kvm_arch_vcpu_ioctl_run before entering the guest to ensure the + * VM has a valid VMID, otherwise assigns a new one and flushes corresponding + * caches and TLBs. + */ +static void update_vttbr(struct kvm *kvm) +{ + phys_addr_t pgd_phys; + u64 vmid; + + if (!need_new_vmid_gen(kvm)) + return; + + spin_lock(&kvm_vmid_lock); + + /* + * We need to re-check the vmid_gen here to ensure that if another vcpu + * already allocated a valid vmid for this vm, then this vcpu should + * use the same vmid. + */ + if (!need_new_vmid_gen(kvm)) { + spin_unlock(&kvm_vmid_lock); + return; + } + + /* First user of a new VMID generation? */ + if (unlikely(kvm_next_vmid == 0)) { + atomic64_inc(&kvm_vmid_gen); + kvm_next_vmid = 1; + + /* + * On SMP we know no other CPUs can use this CPU's or each + * other's VMID after force_vm_exit returns since the + * kvm_vmid_lock blocks them from reentry to the guest. + */ + force_vm_exit(cpu_all_mask); + /* + * Now broadcast TLB + ICACHE invalidation over the inner + * shareable domain to make sure all data structures are + * clean. + */ + kvm_call_hyp(__kvm_flush_vm_context); + } + + kvm->arch.vmid_gen = atomic64_read(&kvm_vmid_gen); + kvm->arch.vmid = kvm_next_vmid; + kvm_next_vmid++; + + /* update vttbr to be used with the new vmid */ + pgd_phys = virt_to_phys(kvm->arch.pgd); + vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK; + kvm->arch.vttbr = pgd_phys & VTTBR_BADDR_MASK; + kvm->arch.vttbr |= vmid; + + spin_unlock(&kvm_vmid_lock); +} + +static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + /* SVC called from Hyp mode should never get here */ + kvm_debug("SVC called from Hyp mode shouldn't go here\n"); + BUG(); + return -EINVAL; /* Squash warning */ +} + +static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0), + vcpu->arch.hsr & HSR_HVC_IMM_MASK); + + if (kvm_psci_call(vcpu)) + return 1; + + kvm_inject_undefined(vcpu); + return 1; +} + +static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + if (kvm_psci_call(vcpu)) + return 1; + + kvm_inject_undefined(vcpu); + return 1; +} + +static int handle_pabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + /* The hypervisor should never cause aborts */ + kvm_err("Prefetch Abort taken from Hyp mode at %#08x (HSR: %#08x)\n", + vcpu->arch.hxfar, vcpu->arch.hsr); + return -EFAULT; +} + +static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + /* This is either an error in the ws. code or an external abort */ + kvm_err("Data Abort taken from Hyp mode at %#08x (HSR: %#08x)\n", + vcpu->arch.hxfar, vcpu->arch.hsr); + return -EFAULT; +} + +typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *); +static exit_handle_fn arm_exit_handlers[] = { + [HSR_EC_WFI] = kvm_handle_wfi, + [HSR_EC_CP15_32] = kvm_handle_cp15_32, + [HSR_EC_CP15_64] = kvm_handle_cp15_64, + [HSR_EC_CP14_MR] = kvm_handle_cp14_access, + [HSR_EC_CP14_LS] = kvm_handle_cp14_load_store, + [HSR_EC_CP14_64] = kvm_handle_cp14_access, + [HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access, + [HSR_EC_CP10_ID] = kvm_handle_cp10_id, + [HSR_EC_SVC_HYP] = handle_svc_hyp, + [HSR_EC_HVC] = handle_hvc, + [HSR_EC_SMC] = handle_smc, + [HSR_EC_IABT] = kvm_handle_guest_abort, + [HSR_EC_IABT_HYP] = handle_pabt_hyp, + [HSR_EC_DABT] = kvm_handle_guest_abort, + [HSR_EC_DABT_HYP] = handle_dabt_hyp, +}; + +/* + * A conditional instruction is allowed to trap, even though it + * wouldn't be executed. So let's re-implement the hardware, in + * software! + */ +static bool kvm_condition_valid(struct kvm_vcpu *vcpu) +{ + unsigned long cpsr, cond, insn; + + /* + * Exception Code 0 can only happen if we set HCR.TGE to 1, to + * catch undefined instructions, and then we won't get past + * the arm_exit_handlers test anyway. + */ + BUG_ON(((vcpu->arch.hsr & HSR_EC) >> HSR_EC_SHIFT) == 0); + + /* Top two bits non-zero? Unconditional. */ + if (vcpu->arch.hsr >> 30) + return true; + + cpsr = *vcpu_cpsr(vcpu); + + /* Is condition field valid? */ + if ((vcpu->arch.hsr & HSR_CV) >> HSR_CV_SHIFT) + cond = (vcpu->arch.hsr & HSR_COND) >> HSR_COND_SHIFT; + else { + /* This can happen in Thumb mode: examine IT state. */ + unsigned long it; + + it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3); + + /* it == 0 => unconditional. */ + if (it == 0) + return true; + + /* The cond for this insn works out as the top 4 bits. */ + cond = (it >> 4); + } + + /* Shift makes it look like an ARM-mode instruction */ + insn = cond << 28; + return arm_check_condition(insn, cpsr) != ARM_OPCODE_CONDTEST_FAIL; +} + +/* + * Return > 0 to return to guest, < 0 on error, 0 (and set exit_reason) on + * proper exit to QEMU. + */ +static int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, + int exception_index) +{ + unsigned long hsr_ec; + + switch (exception_index) { + case ARM_EXCEPTION_IRQ: + return 1; + case ARM_EXCEPTION_UNDEFINED: + kvm_err("Undefined exception in Hyp mode at: %#08x\n", + vcpu->arch.hyp_pc); + BUG(); + panic("KVM: Hypervisor undefined exception!\n"); + case ARM_EXCEPTION_DATA_ABORT: + case ARM_EXCEPTION_PREF_ABORT: + case ARM_EXCEPTION_HVC: + hsr_ec = (vcpu->arch.hsr & HSR_EC) >> HSR_EC_SHIFT; + + if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) + || !arm_exit_handlers[hsr_ec]) { + kvm_err("Unkown exception class: %#08lx, " + "hsr: %#08x\n", hsr_ec, + (unsigned int)vcpu->arch.hsr); + BUG(); + } + + /* + * See ARM ARM B1.14.1: "Hyp traps on instructions + * that fail their condition code check" + */ + if (!kvm_condition_valid(vcpu)) { + bool is_wide = vcpu->arch.hsr & HSR_IL; + kvm_skip_instr(vcpu, is_wide); + return 1; + } + + return arm_exit_handlers[hsr_ec](vcpu, run); + default: + kvm_pr_unimpl("Unsupported exception type: %d", + exception_index); + run->exit_reason = KVM_EXIT_INTERNAL_ERROR; + return 0; + } +} + +static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu) +{ + if (likely(vcpu->arch.has_run_once)) + return 0; + + vcpu->arch.has_run_once = true; + + /* + * Initialize the VGIC before running a vcpu the first time on + * this VM. + */ + if (irqchip_in_kernel(vcpu->kvm) && + unlikely(!vgic_initialized(vcpu->kvm))) { + int ret = kvm_vgic_init(vcpu->kvm); + if (ret) + return ret; + } + + /* + * Handle the "start in power-off" case by calling into the + * PSCI code. + */ + if (test_and_clear_bit(KVM_ARM_VCPU_POWER_OFF, vcpu->arch.features)) { + *vcpu_reg(vcpu, 0) = KVM_PSCI_FN_CPU_OFF; + kvm_psci_call(vcpu); + } + + return 0; +} + +static void vcpu_pause(struct kvm_vcpu *vcpu) +{ + wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + + wait_event_interruptible(*wq, !vcpu->arch.pause); +} + +/** + * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code + * @vcpu: The VCPU pointer + * @run: The kvm_run structure pointer used for userspace state exchange + * + * This function is called through the VCPU_RUN ioctl called from user space. It + * will execute VM code in a loop until the time slice for the process is used + * or some emulation is needed from user space in which case the function will + * return with return value 0 and with the kvm_run structure filled in with the + * required data for the requested emulation. + */ +int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + int ret; + sigset_t sigsaved; + + /* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */ + if (unlikely(vcpu->arch.target < 0)) + return -ENOEXEC; + + ret = kvm_vcpu_first_run_init(vcpu); + if (ret) + return ret; + + if (run->exit_reason == KVM_EXIT_MMIO) { + ret = kvm_handle_mmio_return(vcpu, vcpu->run); + if (ret) + return ret; + } + + if (vcpu->sigset_active) + sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); + + ret = 1; + run->exit_reason = KVM_EXIT_UNKNOWN; + while (ret > 0) { + /* + * Check conditions before entering the guest + */ + cond_resched(); + + update_vttbr(vcpu->kvm); + + if (vcpu->arch.pause) + vcpu_pause(vcpu); + + kvm_vgic_flush_hwstate(vcpu); + kvm_timer_flush_hwstate(vcpu); + + local_irq_disable(); + + /* + * Re-check atomic conditions + */ + if (signal_pending(current)) { + ret = -EINTR; + run->exit_reason = KVM_EXIT_INTR; + } + + if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { + local_irq_enable(); + kvm_timer_sync_hwstate(vcpu); + kvm_vgic_sync_hwstate(vcpu); + continue; + } + + /************************************************************** + * Enter the guest + */ + trace_kvm_entry(*vcpu_pc(vcpu)); + kvm_guest_enter(); + vcpu->mode = IN_GUEST_MODE; + + ret = kvm_call_hyp(__kvm_vcpu_run, vcpu); + + vcpu->mode = OUTSIDE_GUEST_MODE; + vcpu->arch.last_pcpu = smp_processor_id(); + kvm_guest_exit(); + trace_kvm_exit(*vcpu_pc(vcpu)); + /* + * We may have taken a host interrupt in HYP mode (ie + * while executing the guest). This interrupt is still + * pending, as we haven't serviced it yet! + * + * We're now back in SVC mode, with interrupts + * disabled. Enabling the interrupts now will have + * the effect of taking the interrupt again, in SVC + * mode this time. + */ + local_irq_enable(); + + /* + * Back from guest + *************************************************************/ + + kvm_timer_sync_hwstate(vcpu); + kvm_vgic_sync_hwstate(vcpu); + + ret = handle_exit(vcpu, run, ret); + } + + if (vcpu->sigset_active) + sigprocmask(SIG_SETMASK, &sigsaved, NULL); + return ret; +} + +static int vcpu_interrupt_line(struct kvm_vcpu *vcpu, int number, bool level) +{ + int bit_index; + bool set; + unsigned long *ptr; + + if (number == KVM_ARM_IRQ_CPU_IRQ) + bit_index = __ffs(HCR_VI); + else /* KVM_ARM_IRQ_CPU_FIQ */ + bit_index = __ffs(HCR_VF); + + ptr = (unsigned long *)&vcpu->arch.irq_lines; + if (level) + set = test_and_set_bit(bit_index, ptr); + else + set = test_and_clear_bit(bit_index, ptr); + + /* + * If we didn't change anything, no need to wake up or kick other CPUs + */ + if (set == level) + return 0; + + /* + * The vcpu irq_lines field was updated, wake up sleeping VCPUs and + * trigger a world-switch round on the running physical CPU to set the + * virtual IRQ/FIQ fields in the HCR appropriately. + */ + kvm_vcpu_kick(vcpu); + + return 0; +} + +int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level) +{ + u32 irq = irq_level->irq; + unsigned int irq_type, vcpu_idx, irq_num; + int nrcpus = atomic_read(&kvm->online_vcpus); + struct kvm_vcpu *vcpu = NULL; + bool level = irq_level->level; + + irq_type = (irq >> KVM_ARM_IRQ_TYPE_SHIFT) & KVM_ARM_IRQ_TYPE_MASK; + vcpu_idx = (irq >> KVM_ARM_IRQ_VCPU_SHIFT) & KVM_ARM_IRQ_VCPU_MASK; + irq_num = (irq >> KVM_ARM_IRQ_NUM_SHIFT) & KVM_ARM_IRQ_NUM_MASK; + + trace_kvm_irq_line(irq_type, vcpu_idx, irq_num, irq_level->level); + + switch (irq_type) { + case KVM_ARM_IRQ_TYPE_CPU: + if (irqchip_in_kernel(kvm)) + return -ENXIO; + + if (vcpu_idx >= nrcpus) + return -EINVAL; + + vcpu = kvm_get_vcpu(kvm, vcpu_idx); + if (!vcpu) + return -EINVAL; + + if (irq_num > KVM_ARM_IRQ_CPU_FIQ) + return -EINVAL; + + return vcpu_interrupt_line(vcpu, irq_num, level); + case KVM_ARM_IRQ_TYPE_PPI: + if (!irqchip_in_kernel(kvm)) + return -ENXIO; + + if (vcpu_idx >= nrcpus) + return -EINVAL; + + vcpu = kvm_get_vcpu(kvm, vcpu_idx); + if (!vcpu) + return -EINVAL; + + if (irq_num < VGIC_NR_SGIS || irq_num >= VGIC_NR_PRIVATE_IRQS) + return -EINVAL; + + return kvm_vgic_inject_irq(kvm, vcpu->vcpu_id, irq_num, level); + case KVM_ARM_IRQ_TYPE_SPI: + if (!irqchip_in_kernel(kvm)) + return -ENXIO; + + if (irq_num < VGIC_NR_PRIVATE_IRQS || + irq_num > KVM_ARM_IRQ_GIC_MAX) + return -EINVAL; + + return kvm_vgic_inject_irq(kvm, 0, irq_num, level); + } + + return -EINVAL; +} + +long kvm_arch_vcpu_ioctl(struct file *filp, + unsigned int ioctl, unsigned long arg) +{ + struct kvm_vcpu *vcpu = filp->private_data; + void __user *argp = (void __user *)arg; + + switch (ioctl) { + case KVM_ARM_VCPU_INIT: { + struct kvm_vcpu_init init; + + if (copy_from_user(&init, argp, sizeof(init))) + return -EFAULT; + + return kvm_vcpu_set_target(vcpu, &init); + + } + case KVM_SET_ONE_REG: + case KVM_GET_ONE_REG: { + struct kvm_one_reg reg; + if (copy_from_user(®, argp, sizeof(reg))) + return -EFAULT; + if (ioctl == KVM_SET_ONE_REG) + return kvm_arm_set_reg(vcpu, ®); + else + return kvm_arm_get_reg(vcpu, ®); + } + case KVM_GET_REG_LIST: { + struct kvm_reg_list __user *user_list = argp; + struct kvm_reg_list reg_list; + unsigned n; + + if (copy_from_user(®_list, user_list, sizeof(reg_list))) + return -EFAULT; + n = reg_list.n; + reg_list.n = kvm_arm_num_regs(vcpu); + if (copy_to_user(user_list, ®_list, sizeof(reg_list))) + return -EFAULT; + if (n < reg_list.n) + return -E2BIG; + return kvm_arm_copy_reg_indices(vcpu, user_list->reg); + } + default: + return -EINVAL; + } +} + +int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log) +{ + return -EINVAL; +} + +static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm, + struct kvm_arm_device_addr *dev_addr) +{ + unsigned long dev_id, type; + + dev_id = (dev_addr->id & KVM_ARM_DEVICE_ID_MASK) >> + KVM_ARM_DEVICE_ID_SHIFT; + type = (dev_addr->id & KVM_ARM_DEVICE_TYPE_MASK) >> + KVM_ARM_DEVICE_TYPE_SHIFT; + + switch (dev_id) { + case KVM_ARM_DEVICE_VGIC_V2: + if (!vgic_present) + return -ENXIO; + return kvm_vgic_set_addr(kvm, type, dev_addr->addr); + default: + return -ENODEV; + } +} + +long kvm_arch_vm_ioctl(struct file *filp, + unsigned int ioctl, unsigned long arg) +{ + struct kvm *kvm = filp->private_data; + void __user *argp = (void __user *)arg; + + switch (ioctl) { + case KVM_CREATE_IRQCHIP: { + if (vgic_present) + return kvm_vgic_create(kvm); + else + return -ENXIO; + } + case KVM_ARM_SET_DEVICE_ADDR: { + struct kvm_arm_device_addr dev_addr; + + if (copy_from_user(&dev_addr, argp, sizeof(dev_addr))) + return -EFAULT; + return kvm_vm_ioctl_set_device_addr(kvm, &dev_addr); + } + default: + return -EINVAL; + } +} + +static void cpu_init_hyp_mode(void *vector) +{ + unsigned long long pgd_ptr; + unsigned long pgd_low, pgd_high; + unsigned long hyp_stack_ptr; + unsigned long stack_page; + unsigned long vector_ptr; + + /* Switch from the HYP stub to our own HYP init vector */ + __hyp_set_vectors((unsigned long)vector); + + pgd_ptr = (unsigned long long)kvm_mmu_get_httbr(); + pgd_low = (pgd_ptr & ((1ULL << 32) - 1)); + pgd_high = (pgd_ptr >> 32ULL); + stack_page = __get_cpu_var(kvm_arm_hyp_stack_page); + hyp_stack_ptr = stack_page + PAGE_SIZE; + vector_ptr = (unsigned long)__kvm_hyp_vector; + + /* + * Call initialization code, and switch to the full blown + * HYP code. The init code doesn't need to preserve these registers as + * r1-r3 and r12 are already callee save according to the AAPCS. + * Note that we slightly misuse the prototype by casing the pgd_low to + * a void *. + */ + kvm_call_hyp((void *)pgd_low, pgd_high, hyp_stack_ptr, vector_ptr); +} + +/** + * Inits Hyp-mode on all online CPUs + */ +static int init_hyp_mode(void) +{ + phys_addr_t init_phys_addr; + int cpu; + int err = 0; + + /* + * Allocate Hyp PGD and setup Hyp identity mapping + */ + err = kvm_mmu_init(); + if (err) + goto out_err; + + /* + * It is probably enough to obtain the default on one + * CPU. It's unlikely to be different on the others. + */ + hyp_default_vectors = __hyp_get_vectors(); + + /* + * Allocate stack pages for Hypervisor-mode + */ + for_each_possible_cpu(cpu) { + unsigned long stack_page; + + stack_page = __get_free_page(GFP_KERNEL); + if (!stack_page) { + err = -ENOMEM; + goto out_free_stack_pages; + } + + per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page; + } + + /* + * Execute the init code on each CPU. + * + * Note: The stack is not mapped yet, so don't do anything else than + * initializing the hypervisor mode on each CPU using a local stack + * space for temporary storage. + */ + init_phys_addr = virt_to_phys(__kvm_hyp_init); + for_each_online_cpu(cpu) { + smp_call_function_single(cpu, cpu_init_hyp_mode, + (void *)(long)init_phys_addr, 1); + } + + /* + * Unmap the identity mapping + */ + kvm_clear_hyp_idmap(); + + /* + * Map the Hyp-code called directly from the host + */ + err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end); + if (err) { + kvm_err("Cannot map world-switch code\n"); + goto out_free_mappings; + } + + /* + * Map the Hyp stack pages + */ + for_each_possible_cpu(cpu) { + char *stack_page = (char *)per_cpu(kvm_arm_hyp_stack_page, cpu); + err = create_hyp_mappings(stack_page, stack_page + PAGE_SIZE); + + if (err) { + kvm_err("Cannot map hyp stack\n"); + goto out_free_mappings; + } + } + + /* + * Map the host VFP structures + */ + kvm_host_vfp_state = alloc_percpu(struct vfp_hard_struct); + if (!kvm_host_vfp_state) { + err = -ENOMEM; + kvm_err("Cannot allocate host VFP state\n"); + goto out_free_mappings; + } + + for_each_possible_cpu(cpu) { + struct vfp_hard_struct *vfp; + + vfp = per_cpu_ptr(kvm_host_vfp_state, cpu); + err = create_hyp_mappings(vfp, vfp + 1); + + if (err) { + kvm_err("Cannot map host VFP state: %d\n", err); + goto out_free_vfp; + } + } + + /* + * Init HYP view of VGIC + */ + err = kvm_vgic_hyp_init(); + if (err) + goto out_free_vfp; + +#ifdef CONFIG_KVM_ARM_VGIC + vgic_present = true; +#endif + + /* + * Init HYP architected timer support + */ + err = kvm_timer_hyp_init(); + if (err) + goto out_free_mappings; + + kvm_info("Hyp mode initialized successfully\n"); + return 0; +out_free_vfp: + free_percpu(kvm_host_vfp_state); +out_free_mappings: + free_hyp_pmds(); +out_free_stack_pages: + for_each_possible_cpu(cpu) + free_page(per_cpu(kvm_arm_hyp_stack_page, cpu)); +out_err: + kvm_err("error initializing Hyp mode: %d\n", err); + return err; +} + +/** + * Initialize Hyp-mode and memory mappings on all CPUs. + */ +int kvm_arch_init(void *opaque) +{ + int err; + + if (!is_hyp_mode_available()) { + kvm_err("HYP mode not available\n"); + return -ENODEV; + } + + if (kvm_target_cpu() < 0) { + kvm_err("Target CPU not supported!\n"); + return -ENODEV; + } + + err = init_hyp_mode(); + if (err) + goto out_err; + + kvm_coproc_table_init(); + return 0; +out_err: + return err; +} + +/* NOP: Compiling as a module not supported */ +void kvm_arch_exit(void) +{ +} + +static int arm_init(void) +{ + int rc = kvm_init(NULL, sizeof(struct kvm_vcpu), 0, THIS_MODULE); + return rc; +} + +module_init(arm_init); diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c new file mode 100644 index 0000000..4ea9a98 --- /dev/null +++ b/arch/arm/kvm/coproc.c @@ -0,0 +1,1050 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Authors: Rusty Russell <rusty@rustcorp.com.au> + * Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ +#include <linux/mm.h> +#include <linux/kvm_host.h> +#include <linux/uaccess.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_host.h> +#include <asm/kvm_emulate.h> +#include <asm/kvm_coproc.h> +#include <asm/cacheflush.h> +#include <asm/cputype.h> +#include <trace/events/kvm.h> +#include <asm/vfp.h> +#include "../vfp/vfpinstr.h" + +#include "trace.h" +#include "coproc.h" + + +/****************************************************************************** + * Co-processor emulation + *****************************************************************************/ + +/* 3 bits per cache level, as per CLIDR, but non-existent caches always 0 */ +static u32 cache_levels; + +/* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */ +#define CSSELR_MAX 12 + +int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + kvm_inject_undefined(vcpu); + return 1; +} + +int kvm_handle_cp_0_13_access(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + /* + * We can get here, if the host has been built without VFPv3 support, + * but the guest attempted a floating point operation. + */ + kvm_inject_undefined(vcpu); + return 1; +} + +int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + kvm_inject_undefined(vcpu); + return 1; +} + +int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + kvm_inject_undefined(vcpu); + return 1; +} + +/* See note at ARM ARM B1.14.4 */ +static bool access_dcsw(struct kvm_vcpu *vcpu, + const struct coproc_params *p, + const struct coproc_reg *r) +{ + u32 val; + int cpu; + + cpu = get_cpu(); + + if (!p->is_write) + return read_from_write_only(vcpu, p); + + cpumask_setall(&vcpu->arch.require_dcache_flush); + cpumask_clear_cpu(cpu, &vcpu->arch.require_dcache_flush); + + /* If we were already preempted, take the long way around */ + if (cpu != vcpu->arch.last_pcpu) { + flush_cache_all(); + goto done; + } + + val = *vcpu_reg(vcpu, p->Rt1); + + switch (p->CRm) { + case 6: /* Upgrade DCISW to DCCISW, as per HCR.SWIO */ + case 14: /* DCCISW */ + asm volatile("mcr p15, 0, %0, c7, c14, 2" : : "r" (val)); + break; + + case 10: /* DCCSW */ + asm volatile("mcr p15, 0, %0, c7, c10, 2" : : "r" (val)); + break; + } + +done: + put_cpu(); + + return true; +} + +/* + * We could trap ID_DFR0 and tell the guest we don't support performance + * monitoring. Unfortunately the patch to make the kernel check ID_DFR0 was + * NAKed, so it will read the PMCR anyway. + * + * Therefore we tell the guest we have 0 counters. Unfortunately, we + * must always support PMCCNTR (the cycle counter): we just RAZ/WI for + * all PM registers, which doesn't crash the guest kernel at least. + */ +static bool pm_fake(struct kvm_vcpu *vcpu, + const struct coproc_params *p, + const struct coproc_reg *r) +{ + if (p->is_write) + return ignore_write(vcpu, p); + else + return read_zero(vcpu, p); +} + +#define access_pmcr pm_fake +#define access_pmcntenset pm_fake +#define access_pmcntenclr pm_fake +#define access_pmovsr pm_fake +#define access_pmselr pm_fake +#define access_pmceid0 pm_fake +#define access_pmceid1 pm_fake +#define access_pmccntr pm_fake +#define access_pmxevtyper pm_fake +#define access_pmxevcntr pm_fake +#define access_pmuserenr pm_fake +#define access_pmintenset pm_fake +#define access_pmintenclr pm_fake + +/* Architected CP15 registers. + * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 + */ +static const struct coproc_reg cp15_regs[] = { + /* CSSELR: swapped by interrupt.S. */ + { CRn( 0), CRm( 0), Op1( 2), Op2( 0), is32, + NULL, reset_unknown, c0_CSSELR }, + + /* TTBR0/TTBR1: swapped by interrupt.S. */ + { CRm( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 }, + { CRm( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 }, + + /* TTBCR: swapped by interrupt.S. */ + { CRn( 2), CRm( 0), Op1( 0), Op2( 2), is32, + NULL, reset_val, c2_TTBCR, 0x00000000 }, + + /* DACR: swapped by interrupt.S. */ + { CRn( 3), CRm( 0), Op1( 0), Op2( 0), is32, + NULL, reset_unknown, c3_DACR }, + + /* DFSR/IFSR/ADFSR/AIFSR: swapped by interrupt.S. */ + { CRn( 5), CRm( 0), Op1( 0), Op2( 0), is32, + NULL, reset_unknown, c5_DFSR }, + { CRn( 5), CRm( 0), Op1( 0), Op2( 1), is32, + NULL, reset_unknown, c5_IFSR }, + { CRn( 5), CRm( 1), Op1( 0), Op2( 0), is32, + NULL, reset_unknown, c5_ADFSR }, + { CRn( 5), CRm( 1), Op1( 0), Op2( 1), is32, + NULL, reset_unknown, c5_AIFSR }, + + /* DFAR/IFAR: swapped by interrupt.S. */ + { CRn( 6), CRm( 0), Op1( 0), Op2( 0), is32, + NULL, reset_unknown, c6_DFAR }, + { CRn( 6), CRm( 0), Op1( 0), Op2( 2), is32, + NULL, reset_unknown, c6_IFAR }, + /* + * DC{C,I,CI}SW operations: + */ + { CRn( 7), CRm( 6), Op1( 0), Op2( 2), is32, access_dcsw}, + { CRn( 7), CRm(10), Op1( 0), Op2( 2), is32, access_dcsw}, + { CRn( 7), CRm(14), Op1( 0), Op2( 2), is32, access_dcsw}, + /* + * Dummy performance monitor implementation. + */ + { CRn( 9), CRm(12), Op1( 0), Op2( 0), is32, access_pmcr}, + { CRn( 9), CRm(12), Op1( 0), Op2( 1), is32, access_pmcntenset}, + { CRn( 9), CRm(12), Op1( 0), Op2( 2), is32, access_pmcntenclr}, + { CRn( 9), CRm(12), Op1( 0), Op2( 3), is32, access_pmovsr}, + { CRn( 9), CRm(12), Op1( 0), Op2( 5), is32, access_pmselr}, + { CRn( 9), CRm(12), Op1( 0), Op2( 6), is32, access_pmceid0}, + { CRn( 9), CRm(12), Op1( 0), Op2( 7), is32, access_pmceid1}, + { CRn( 9), CRm(13), Op1( 0), Op2( 0), is32, access_pmccntr}, + { CRn( 9), CRm(13), Op1( 0), Op2( 1), is32, access_pmxevtyper}, + { CRn( 9), CRm(13), Op1( 0), Op2( 2), is32, access_pmxevcntr}, + { CRn( 9), CRm(14), Op1( 0), Op2( 0), is32, access_pmuserenr}, + { CRn( 9), CRm(14), Op1( 0), Op2( 1), is32, access_pmintenset}, + { CRn( 9), CRm(14), Op1( 0), Op2( 2), is32, access_pmintenclr}, + + /* PRRR/NMRR (aka MAIR0/MAIR1): swapped by interrupt.S. */ + { CRn(10), CRm( 2), Op1( 0), Op2( 0), is32, + NULL, reset_unknown, c10_PRRR}, + { CRn(10), CRm( 2), Op1( 0), Op2( 1), is32, + NULL, reset_unknown, c10_NMRR}, + + /* VBAR: swapped by interrupt.S. */ + { CRn(12), CRm( 0), Op1( 0), Op2( 0), is32, + NULL, reset_val, c12_VBAR, 0x00000000 }, + + /* CONTEXTIDR/TPIDRURW/TPIDRURO/TPIDRPRW: swapped by interrupt.S. */ + { CRn(13), CRm( 0), Op1( 0), Op2( 1), is32, + NULL, reset_val, c13_CID, 0x00000000 }, + { CRn(13), CRm( 0), Op1( 0), Op2( 2), is32, + NULL, reset_unknown, c13_TID_URW }, + { CRn(13), CRm( 0), Op1( 0), Op2( 3), is32, + NULL, reset_unknown, c13_TID_URO }, + { CRn(13), CRm( 0), Op1( 0), Op2( 4), is32, + NULL, reset_unknown, c13_TID_PRIV }, + + /* CNTKCTL: swapped by interrupt.S. */ + { CRn(14), CRm( 1), Op1( 0), Op2( 0), is32, + NULL, reset_val, c14_CNTKCTL, 0x00000000 }, +}; + +/* Target specific emulation tables */ +static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS]; + +void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table) +{ + target_tables[table->target] = table; +} + +/* Get specific register table for this target. */ +static const struct coproc_reg *get_target_table(unsigned target, size_t *num) +{ + struct kvm_coproc_target_table *table; + + table = target_tables[target]; + *num = table->num; + return table->table; +} + +static const struct coproc_reg *find_reg(const struct coproc_params *params, + const struct coproc_reg table[], + unsigned int num) +{ + unsigned int i; + + for (i = 0; i < num; i++) { + const struct coproc_reg *r = &table[i]; + + if (params->is_64bit != r->is_64) + continue; + if (params->CRn != r->CRn) + continue; + if (params->CRm != r->CRm) + continue; + if (params->Op1 != r->Op1) + continue; + if (params->Op2 != r->Op2) + continue; + + return r; + } + return NULL; +} + +static int emulate_cp15(struct kvm_vcpu *vcpu, + const struct coproc_params *params) +{ + size_t num; + const struct coproc_reg *table, *r; + + trace_kvm_emulate_cp15_imp(params->Op1, params->Rt1, params->CRn, + params->CRm, params->Op2, params->is_write); + + table = get_target_table(vcpu->arch.target, &num); + + /* Search target-specific then generic table. */ + r = find_reg(params, table, num); + if (!r) + r = find_reg(params, cp15_regs, ARRAY_SIZE(cp15_regs)); + + if (likely(r)) { + /* If we don't have an accessor, we should never get here! */ + BUG_ON(!r->access); + + if (likely(r->access(vcpu, params, r))) { + /* Skip instruction, since it was emulated */ + kvm_skip_instr(vcpu, (vcpu->arch.hsr >> 25) & 1); + return 1; + } + /* If access function fails, it should complain. */ + } else { + kvm_err("Unsupported guest CP15 access at: %08x\n", + *vcpu_pc(vcpu)); + print_cp_instr(params); + } + kvm_inject_undefined(vcpu); + return 1; +} + +/** + * kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access + * @vcpu: The VCPU pointer + * @run: The kvm_run struct + */ +int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + struct coproc_params params; + + params.CRm = (vcpu->arch.hsr >> 1) & 0xf; + params.Rt1 = (vcpu->arch.hsr >> 5) & 0xf; + params.is_write = ((vcpu->arch.hsr & 1) == 0); + params.is_64bit = true; + + params.Op1 = (vcpu->arch.hsr >> 16) & 0xf; + params.Op2 = 0; + params.Rt2 = (vcpu->arch.hsr >> 10) & 0xf; + params.CRn = 0; + + return emulate_cp15(vcpu, ¶ms); +} + +static void reset_coproc_regs(struct kvm_vcpu *vcpu, + const struct coproc_reg *table, size_t num) +{ + unsigned long i; + + for (i = 0; i < num; i++) + if (table[i].reset) + table[i].reset(vcpu, &table[i]); +} + +/** + * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access + * @vcpu: The VCPU pointer + * @run: The kvm_run struct + */ +int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + struct coproc_params params; + + params.CRm = (vcpu->arch.hsr >> 1) & 0xf; + params.Rt1 = (vcpu->arch.hsr >> 5) & 0xf; + params.is_write = ((vcpu->arch.hsr & 1) == 0); + params.is_64bit = false; + + params.CRn = (vcpu->arch.hsr >> 10) & 0xf; + params.Op1 = (vcpu->arch.hsr >> 14) & 0x7; + params.Op2 = (vcpu->arch.hsr >> 17) & 0x7; + params.Rt2 = 0; + + return emulate_cp15(vcpu, ¶ms); +} + +/****************************************************************************** + * Userspace API + *****************************************************************************/ + +static bool index_to_params(u64 id, struct coproc_params *params) +{ + switch (id & KVM_REG_SIZE_MASK) { + case KVM_REG_SIZE_U32: + /* Any unused index bits means it's not valid. */ + if (id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK + | KVM_REG_ARM_COPROC_MASK + | KVM_REG_ARM_32_CRN_MASK + | KVM_REG_ARM_CRM_MASK + | KVM_REG_ARM_OPC1_MASK + | KVM_REG_ARM_32_OPC2_MASK)) + return false; + + params->is_64bit = false; + params->CRn = ((id & KVM_REG_ARM_32_CRN_MASK) + >> KVM_REG_ARM_32_CRN_SHIFT); + params->CRm = ((id & KVM_REG_ARM_CRM_MASK) + >> KVM_REG_ARM_CRM_SHIFT); + params->Op1 = ((id & KVM_REG_ARM_OPC1_MASK) + >> KVM_REG_ARM_OPC1_SHIFT); + params->Op2 = ((id & KVM_REG_ARM_32_OPC2_MASK) + >> KVM_REG_ARM_32_OPC2_SHIFT); + return true; + case KVM_REG_SIZE_U64: + /* Any unused index bits means it's not valid. */ + if (id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK + | KVM_REG_ARM_COPROC_MASK + | KVM_REG_ARM_CRM_MASK + | KVM_REG_ARM_OPC1_MASK)) + return false; + params->is_64bit = true; + params->CRm = ((id & KVM_REG_ARM_CRM_MASK) + >> KVM_REG_ARM_CRM_SHIFT); + params->Op1 = ((id & KVM_REG_ARM_OPC1_MASK) + >> KVM_REG_ARM_OPC1_SHIFT); + params->Op2 = 0; + params->CRn = 0; + return true; + default: + return false; + } +} + +/* Decode an index value, and find the cp15 coproc_reg entry. */ +static const struct coproc_reg *index_to_coproc_reg(struct kvm_vcpu *vcpu, + u64 id) +{ + size_t num; + const struct coproc_reg *table, *r; + struct coproc_params params; + + /* We only do cp15 for now. */ + if ((id & KVM_REG_ARM_COPROC_MASK) >> KVM_REG_ARM_COPROC_SHIFT != 15) + return NULL; + + if (!index_to_params(id, ¶ms)) + return NULL; + + table = get_target_table(vcpu->arch.target, &num); + r = find_reg(¶ms, table, num); + if (!r) + r = find_reg(¶ms, cp15_regs, ARRAY_SIZE(cp15_regs)); + + /* Not saved in the cp15 array? */ + if (r && !r->reg) + r = NULL; + + return r; +} + +/* + * These are the invariant cp15 registers: we let the guest see the host + * versions of these, so they're part of the guest state. + * + * A future CPU may provide a mechanism to present different values to + * the guest, or a future kvm may trap them. + */ +/* Unfortunately, there's no register-argument for mrc, so generate. */ +#define FUNCTION_FOR32(crn, crm, op1, op2, name) \ + static void get_##name(struct kvm_vcpu *v, \ + const struct coproc_reg *r) \ + { \ + u32 val; \ + \ + asm volatile("mrc p15, " __stringify(op1) \ + ", %0, c" __stringify(crn) \ + ", c" __stringify(crm) \ + ", " __stringify(op2) "\n" : "=r" (val)); \ + ((struct coproc_reg *)r)->val = val; \ + } + +FUNCTION_FOR32(0, 0, 0, 0, MIDR) +FUNCTION_FOR32(0, 0, 0, 1, CTR) +FUNCTION_FOR32(0, 0, 0, 2, TCMTR) +FUNCTION_FOR32(0, 0, 0, 3, TLBTR) +FUNCTION_FOR32(0, 0, 0, 6, REVIDR) +FUNCTION_FOR32(0, 1, 0, 0, ID_PFR0) +FUNCTION_FOR32(0, 1, 0, 1, ID_PFR1) +FUNCTION_FOR32(0, 1, 0, 2, ID_DFR0) +FUNCTION_FOR32(0, 1, 0, 3, ID_AFR0) +FUNCTION_FOR32(0, 1, 0, 4, ID_MMFR0) +FUNCTION_FOR32(0, 1, 0, 5, ID_MMFR1) +FUNCTION_FOR32(0, 1, 0, 6, ID_MMFR2) +FUNCTION_FOR32(0, 1, 0, 7, ID_MMFR3) +FUNCTION_FOR32(0, 2, 0, 0, ID_ISAR0) +FUNCTION_FOR32(0, 2, 0, 1, ID_ISAR1) +FUNCTION_FOR32(0, 2, 0, 2, ID_ISAR2) +FUNCTION_FOR32(0, 2, 0, 3, ID_ISAR3) +FUNCTION_FOR32(0, 2, 0, 4, ID_ISAR4) +FUNCTION_FOR32(0, 2, 0, 5, ID_ISAR5) +FUNCTION_FOR32(0, 0, 1, 1, CLIDR) +FUNCTION_FOR32(0, 0, 1, 7, AIDR) + +/* ->val is filled in by kvm_invariant_coproc_table_init() */ +static struct coproc_reg invariant_cp15[] = { + { CRn( 0), CRm( 0), Op1( 0), Op2( 0), is32, NULL, get_MIDR }, + { CRn( 0), CRm( 0), Op1( 0), Op2( 1), is32, NULL, get_CTR }, + { CRn( 0), CRm( 0), Op1( 0), Op2( 2), is32, NULL, get_TCMTR }, + { CRn( 0), CRm( 0), Op1( 0), Op2( 3), is32, NULL, get_TLBTR }, + { CRn( 0), CRm( 0), Op1( 0), Op2( 6), is32, NULL, get_REVIDR }, + + { CRn( 0), CRm( 1), Op1( 0), Op2( 0), is32, NULL, get_ID_PFR0 }, + { CRn( 0), CRm( 1), Op1( 0), Op2( 1), is32, NULL, get_ID_PFR1 }, + { CRn( 0), CRm( 1), Op1( 0), Op2( 2), is32, NULL, get_ID_DFR0 }, + { CRn( 0), CRm( 1), Op1( 0), Op2( 3), is32, NULL, get_ID_AFR0 }, + { CRn( 0), CRm( 1), Op1( 0), Op2( 4), is32, NULL, get_ID_MMFR0 }, + { CRn( 0), CRm( 1), Op1( 0), Op2( 5), is32, NULL, get_ID_MMFR1 }, + { CRn( 0), CRm( 1), Op1( 0), Op2( 6), is32, NULL, get_ID_MMFR2 }, + { CRn( 0), CRm( 1), Op1( 0), Op2( 7), is32, NULL, get_ID_MMFR3 }, + + { CRn( 0), CRm( 2), Op1( 0), Op2( 0), is32, NULL, get_ID_ISAR0 }, + { CRn( 0), CRm( 2), Op1( 0), Op2( 1), is32, NULL, get_ID_ISAR1 }, + { CRn( 0), CRm( 2), Op1( 0), Op2( 2), is32, NULL, get_ID_ISAR2 }, + { CRn( 0), CRm( 2), Op1( 0), Op2( 3), is32, NULL, get_ID_ISAR3 }, + { CRn( 0), CRm( 2), Op1( 0), Op2( 4), is32, NULL, get_ID_ISAR4 }, + { CRn( 0), CRm( 2), Op1( 0), Op2( 5), is32, NULL, get_ID_ISAR5 }, + + { CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR }, + { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, +}; + +static int reg_from_user(void *val, const void __user *uaddr, u64 id) +{ + /* This Just Works because we are little endian. */ + if (copy_from_user(val, uaddr, KVM_REG_SIZE(id)) != 0) + return -EFAULT; + return 0; +} + +static int reg_to_user(void __user *uaddr, const void *val, u64 id) +{ + /* This Just Works because we are little endian. */ + if (copy_to_user(uaddr, val, KVM_REG_SIZE(id)) != 0) + return -EFAULT; + return 0; +} + +static int get_invariant_cp15(u64 id, void __user *uaddr) +{ + struct coproc_params params; + const struct coproc_reg *r; + + if (!index_to_params(id, ¶ms)) + return -ENOENT; + + r = find_reg(¶ms, invariant_cp15, ARRAY_SIZE(invariant_cp15)); + if (!r) + return -ENOENT; + + return reg_to_user(uaddr, &r->val, id); +} + +static int set_invariant_cp15(u64 id, void __user *uaddr) +{ + struct coproc_params params; + const struct coproc_reg *r; + int err; + u64 val = 0; /* Make sure high bits are 0 for 32-bit regs */ + + if (!index_to_params(id, ¶ms)) + return -ENOENT; + r = find_reg(¶ms, invariant_cp15, ARRAY_SIZE(invariant_cp15)); + if (!r) + return -ENOENT; + + err = reg_from_user(&val, uaddr, id); + if (err) + return err; + + /* This is what we mean by invariant: you can't change it. */ + if (r->val != val) + return -EINVAL; + + return 0; +} + +static bool is_valid_cache(u32 val) +{ + u32 level, ctype; + + if (val >= CSSELR_MAX) + return -ENOENT; + + /* Bottom bit is Instruction or Data bit. Next 3 bits are level. */ + level = (val >> 1); + ctype = (cache_levels >> (level * 3)) & 7; + + switch (ctype) { + case 0: /* No cache */ + return false; + case 1: /* Instruction cache only */ + return (val & 1); + case 2: /* Data cache only */ + case 4: /* Unified cache */ + return !(val & 1); + case 3: /* Separate instruction and data caches */ + return true; + default: /* Reserved: we can't know instruction or data. */ + return false; + } +} + +/* Which cache CCSIDR represents depends on CSSELR value. */ +static u32 get_ccsidr(u32 csselr) +{ + u32 ccsidr; + + /* Make sure noone else changes CSSELR during this! */ + local_irq_disable(); + /* Put value into CSSELR */ + asm volatile("mcr p15, 2, %0, c0, c0, 0" : : "r" (csselr)); + isb(); + /* Read result out of CCSIDR */ + asm volatile("mrc p15, 1, %0, c0, c0, 0" : "=r" (ccsidr)); + local_irq_enable(); + + return ccsidr; +} + +static int demux_c15_get(u64 id, void __user *uaddr) +{ + u32 val; + u32 __user *uval = uaddr; + + /* Fail if we have unknown bits set. */ + if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK + | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1))) + return -ENOENT; + + switch (id & KVM_REG_ARM_DEMUX_ID_MASK) { + case KVM_REG_ARM_DEMUX_ID_CCSIDR: + if (KVM_REG_SIZE(id) != 4) + return -ENOENT; + val = (id & KVM_REG_ARM_DEMUX_VAL_MASK) + >> KVM_REG_ARM_DEMUX_VAL_SHIFT; + if (!is_valid_cache(val)) + return -ENOENT; + + return put_user(get_ccsidr(val), uval); + default: + return -ENOENT; + } +} + +static int demux_c15_set(u64 id, void __user *uaddr) +{ + u32 val, newval; + u32 __user *uval = uaddr; + + /* Fail if we have unknown bits set. */ + if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK + | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1))) + return -ENOENT; + + switch (id & KVM_REG_ARM_DEMUX_ID_MASK) { + case KVM_REG_ARM_DEMUX_ID_CCSIDR: + if (KVM_REG_SIZE(id) != 4) + return -ENOENT; + val = (id & KVM_REG_ARM_DEMUX_VAL_MASK) + >> KVM_REG_ARM_DEMUX_VAL_SHIFT; + if (!is_valid_cache(val)) + return -ENOENT; + + if (get_user(newval, uval)) + return -EFAULT; + + /* This is also invariant: you can't change it. */ + if (newval != get_ccsidr(val)) + return -EINVAL; + return 0; + default: + return -ENOENT; + } +} + +#ifdef CONFIG_VFPv3 +static const int vfp_sysregs[] = { KVM_REG_ARM_VFP_FPEXC, + KVM_REG_ARM_VFP_FPSCR, + KVM_REG_ARM_VFP_FPINST, + KVM_REG_ARM_VFP_FPINST2, + KVM_REG_ARM_VFP_MVFR0, + KVM_REG_ARM_VFP_MVFR1, + KVM_REG_ARM_VFP_FPSID }; + +static unsigned int num_fp_regs(void) +{ + if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK) >> MVFR0_A_SIMD_BIT) == 2) + return 32; + else + return 16; +} + +static unsigned int num_vfp_regs(void) +{ + /* Normal FP regs + control regs. */ + return num_fp_regs() + ARRAY_SIZE(vfp_sysregs); +} + +static int copy_vfp_regids(u64 __user *uindices) +{ + unsigned int i; + const u64 u32reg = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP; + const u64 u64reg = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP; + + for (i = 0; i < num_fp_regs(); i++) { + if (put_user((u64reg | KVM_REG_ARM_VFP_BASE_REG) + i, + uindices)) + return -EFAULT; + uindices++; + } + + for (i = 0; i < ARRAY_SIZE(vfp_sysregs); i++) { + if (put_user(u32reg | vfp_sysregs[i], uindices)) + return -EFAULT; + uindices++; + } + + return num_vfp_regs(); +} + +static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) +{ + u32 vfpid = (id & KVM_REG_ARM_VFP_MASK); + u32 val; + + /* Fail if we have unknown bits set. */ + if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK + | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1))) + return -ENOENT; + + if (vfpid < num_fp_regs()) { + if (KVM_REG_SIZE(id) != 8) + return -ENOENT; + return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid], + id); + } + + /* FP control registers are all 32 bit. */ + if (KVM_REG_SIZE(id) != 4) + return -ENOENT; + + switch (vfpid) { + case KVM_REG_ARM_VFP_FPEXC: + return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpexc, id); + case KVM_REG_ARM_VFP_FPSCR: + return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpscr, id); + case KVM_REG_ARM_VFP_FPINST: + return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst, id); + case KVM_REG_ARM_VFP_FPINST2: + return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst2, id); + case KVM_REG_ARM_VFP_MVFR0: + val = fmrx(MVFR0); + return reg_to_user(uaddr, &val, id); + case KVM_REG_ARM_VFP_MVFR1: + val = fmrx(MVFR1); + return reg_to_user(uaddr, &val, id); + case KVM_REG_ARM_VFP_FPSID: + val = fmrx(FPSID); + return reg_to_user(uaddr, &val, id); + default: + return -ENOENT; + } +} + +static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) +{ + u32 vfpid = (id & KVM_REG_ARM_VFP_MASK); + u32 val; + + /* Fail if we have unknown bits set. */ + if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK + | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1))) + return -ENOENT; + + if (vfpid < num_fp_regs()) { + if (KVM_REG_SIZE(id) != 8) + return -ENOENT; + return reg_from_user(&vcpu->arch.vfp_guest.fpregs[vfpid], + uaddr, id); + } + + /* FP control registers are all 32 bit. */ + if (KVM_REG_SIZE(id) != 4) + return -ENOENT; + + switch (vfpid) { + case KVM_REG_ARM_VFP_FPEXC: + return reg_from_user(&vcpu->arch.vfp_guest.fpexc, uaddr, id); + case KVM_REG_ARM_VFP_FPSCR: + return reg_from_user(&vcpu->arch.vfp_guest.fpscr, uaddr, id); + case KVM_REG_ARM_VFP_FPINST: + return reg_from_user(&vcpu->arch.vfp_guest.fpinst, uaddr, id); + case KVM_REG_ARM_VFP_FPINST2: + return reg_from_user(&vcpu->arch.vfp_guest.fpinst2, uaddr, id); + /* These are invariant. */ + case KVM_REG_ARM_VFP_MVFR0: + if (reg_from_user(&val, uaddr, id)) + return -EFAULT; + if (val != fmrx(MVFR0)) + return -EINVAL; + return 0; + case KVM_REG_ARM_VFP_MVFR1: + if (reg_from_user(&val, uaddr, id)) + return -EFAULT; + if (val != fmrx(MVFR1)) + return -EINVAL; + return 0; + case KVM_REG_ARM_VFP_FPSID: + if (reg_from_user(&val, uaddr, id)) + return -EFAULT; + if (val != fmrx(FPSID)) + return -EINVAL; + return 0; + default: + return -ENOENT; + } +} +#else /* !CONFIG_VFPv3 */ +static unsigned int num_vfp_regs(void) +{ + return 0; +} + +static int copy_vfp_regids(u64 __user *uindices) +{ + return 0; +} + +static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr) +{ + return -ENOENT; +} + +static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr) +{ + return -ENOENT; +} +#endif /* !CONFIG_VFPv3 */ + +int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) +{ + const struct coproc_reg *r; + void __user *uaddr = (void __user *)(long)reg->addr; + + if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX) + return demux_c15_get(reg->id, uaddr); + + if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_VFP) + return vfp_get_reg(vcpu, reg->id, uaddr); + + r = index_to_coproc_reg(vcpu, reg->id); + if (!r) + return get_invariant_cp15(reg->id, uaddr); + + /* Note: copies two regs if size is 64 bit. */ + return reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id); +} + +int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) +{ + const struct coproc_reg *r; + void __user *uaddr = (void __user *)(long)reg->addr; + + if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX) + return demux_c15_set(reg->id, uaddr); + + if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_VFP) + return vfp_set_reg(vcpu, reg->id, uaddr); + + r = index_to_coproc_reg(vcpu, reg->id); + if (!r) + return set_invariant_cp15(reg->id, uaddr); + + /* Note: copies two regs if size is 64 bit */ + return reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id); +} + +static unsigned int num_demux_regs(void) +{ + unsigned int i, count = 0; + + for (i = 0; i < CSSELR_MAX; i++) + if (is_valid_cache(i)) + count++; + + return count; +} + +static int write_demux_regids(u64 __user *uindices) +{ + u64 val = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_DEMUX; + unsigned int i; + + val |= KVM_REG_ARM_DEMUX_ID_CCSIDR; + for (i = 0; i < CSSELR_MAX; i++) { + if (!is_valid_cache(i)) + continue; + if (put_user(val | i, uindices)) + return -EFAULT; + uindices++; + } + return 0; +} + +static u64 cp15_to_index(const struct coproc_reg *reg) +{ + u64 val = KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT); + if (reg->is_64) { + val |= KVM_REG_SIZE_U64; + val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); + val |= (reg->CRm << KVM_REG_ARM_CRM_SHIFT); + } else { + val |= KVM_REG_SIZE_U32; + val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT); + val |= (reg->Op2 << KVM_REG_ARM_32_OPC2_SHIFT); + val |= (reg->CRm << KVM_REG_ARM_CRM_SHIFT); + val |= (reg->CRn << KVM_REG_ARM_32_CRN_SHIFT); + } + return val; +} + +static bool copy_reg_to_user(const struct coproc_reg *reg, u64 __user **uind) +{ + if (!*uind) + return true; + + if (put_user(cp15_to_index(reg), *uind)) + return false; + + (*uind)++; + return true; +} + +/* Assumed ordered tables, see kvm_coproc_table_init. */ +static int walk_cp15(struct kvm_vcpu *vcpu, u64 __user *uind) +{ + const struct coproc_reg *i1, *i2, *end1, *end2; + unsigned int total = 0; + size_t num; + + /* We check for duplicates here, to allow arch-specific overrides. */ + i1 = get_target_table(vcpu->arch.target, &num); + end1 = i1 + num; + i2 = cp15_regs; + end2 = cp15_regs + ARRAY_SIZE(cp15_regs); + + BUG_ON(i1 == end1 || i2 == end2); + + /* Walk carefully, as both tables may refer to the same register. */ + while (i1 || i2) { + int cmp = cmp_reg(i1, i2); + /* target-specific overrides generic entry. */ + if (cmp <= 0) { + /* Ignore registers we trap but don't save. */ + if (i1->reg) { + if (!copy_reg_to_user(i1, &uind)) + return -EFAULT; + total++; + } + } else { + /* Ignore registers we trap but don't save. */ + if (i2->reg) { + if (!copy_reg_to_user(i2, &uind)) + return -EFAULT; + total++; + } + } + + if (cmp <= 0 && ++i1 == end1) + i1 = NULL; + if (cmp >= 0 && ++i2 == end2) + i2 = NULL; + } + return total; +} + +unsigned long kvm_arm_num_coproc_regs(struct kvm_vcpu *vcpu) +{ + return ARRAY_SIZE(invariant_cp15) + + num_demux_regs() + + num_vfp_regs() + + walk_cp15(vcpu, (u64 __user *)NULL); +} + +int kvm_arm_copy_coproc_indices(struct kvm_vcpu *vcpu, u64 __user *uindices) +{ + unsigned int i; + int err; + + /* Then give them all the invariant registers' indices. */ + for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++) { + if (put_user(cp15_to_index(&invariant_cp15[i]), uindices)) + return -EFAULT; + uindices++; + } + + err = walk_cp15(vcpu, uindices); + if (err < 0) + return err; + uindices += err; + + err = copy_vfp_regids(uindices); + if (err < 0) + return err; + uindices += err; + + return write_demux_regids(uindices); +} + +void kvm_coproc_table_init(void) +{ + unsigned int i; + + /* Make sure tables are unique and in order. */ + for (i = 1; i < ARRAY_SIZE(cp15_regs); i++) + BUG_ON(cmp_reg(&cp15_regs[i-1], &cp15_regs[i]) >= 0); + + /* We abuse the reset function to overwrite the table itself. */ + for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++) + invariant_cp15[i].reset(NULL, &invariant_cp15[i]); + + /* + * CLIDR format is awkward, so clean it up. See ARM B4.1.20: + * + * If software reads the Cache Type fields from Ctype1 + * upwards, once it has seen a value of 0b000, no caches + * exist at further-out levels of the hierarchy. So, for + * example, if Ctype3 is the first Cache Type field with a + * value of 0b000, the values of Ctype4 to Ctype7 must be + * ignored. + */ + asm volatile("mrc p15, 1, %0, c0, c0, 1" : "=r" (cache_levels)); + for (i = 0; i < 7; i++) + if (((cache_levels >> (i*3)) & 7) == 0) + break; + /* Clear all higher bits. */ + cache_levels &= (1 << (i*3))-1; +} + +/** + * kvm_reset_coprocs - sets cp15 registers to reset value + * @vcpu: The VCPU pointer + * + * This function finds the right table above and sets the registers on the + * virtual CPU struct to their architecturally defined reset values. + */ +void kvm_reset_coprocs(struct kvm_vcpu *vcpu) +{ + size_t num; + const struct coproc_reg *table; + + /* Catch someone adding a register without putting in reset entry. */ + memset(vcpu->arch.cp15, 0x42, sizeof(vcpu->arch.cp15)); + + /* Generic chip reset first (so target could override). */ + reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs)); + + table = get_target_table(vcpu->arch.target, &num); + reset_coproc_regs(vcpu, table, num); + + for (num = 1; num < NR_CP15_REGS; num++) + if (vcpu->arch.cp15[num] == 0x42424242) + panic("Didn't reset vcpu->arch.cp15[%zi]", num); +} diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h new file mode 100644 index 0000000..992adfa --- /dev/null +++ b/arch/arm/kvm/coproc.h @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Authors: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ARM_KVM_COPROC_LOCAL_H__ +#define __ARM_KVM_COPROC_LOCAL_H__ + +struct coproc_params { + unsigned long CRn; + unsigned long CRm; + unsigned long Op1; + unsigned long Op2; + unsigned long Rt1; + unsigned long Rt2; + bool is_64bit; + bool is_write; +}; + +struct coproc_reg { + /* MRC/MCR/MRRC/MCRR instruction which accesses it. */ + unsigned long CRn; + unsigned long CRm; + unsigned long Op1; + unsigned long Op2; + + bool is_64; + + /* Trapped access from guest, if non-NULL. */ + bool (*access)(struct kvm_vcpu *, + const struct coproc_params *, + const struct coproc_reg *); + + /* Initialization for vcpu. */ + void (*reset)(struct kvm_vcpu *, const struct coproc_reg *); + + /* Index into vcpu->arch.cp15[], or 0 if we don't need to save it. */ + unsigned long reg; + + /* Value (usually reset value) */ + u64 val; +}; + +static inline void print_cp_instr(const struct coproc_params *p) +{ + /* Look, we even formatted it for you to paste into the table! */ + if (p->is_64bit) { + kvm_pr_unimpl(" { CRm(%2lu), Op1(%2lu), is64, func_%s },\n", + p->CRm, p->Op1, p->is_write ? "write" : "read"); + } else { + kvm_pr_unimpl(" { CRn(%2lu), CRm(%2lu), Op1(%2lu), Op2(%2lu), is32," + " func_%s },\n", + p->CRn, p->CRm, p->Op1, p->Op2, + p->is_write ? "write" : "read"); + } +} + +static inline bool ignore_write(struct kvm_vcpu *vcpu, + const struct coproc_params *p) +{ + return true; +} + +static inline bool read_zero(struct kvm_vcpu *vcpu, + const struct coproc_params *p) +{ + *vcpu_reg(vcpu, p->Rt1) = 0; + return true; +} + +static inline bool write_to_read_only(struct kvm_vcpu *vcpu, + const struct coproc_params *params) +{ + kvm_debug("CP15 write to read-only register at: %08x\n", + *vcpu_pc(vcpu)); + print_cp_instr(params); + return false; +} + +static inline bool read_from_write_only(struct kvm_vcpu *vcpu, + const struct coproc_params *params) +{ + kvm_debug("CP15 read to write-only register at: %08x\n", + *vcpu_pc(vcpu)); + print_cp_instr(params); + return false; +} + +/* Reset functions */ +static inline void reset_unknown(struct kvm_vcpu *vcpu, + const struct coproc_reg *r) +{ + BUG_ON(!r->reg); + BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15)); + vcpu->arch.cp15[r->reg] = 0xdecafbad; +} + +static inline void reset_val(struct kvm_vcpu *vcpu, const struct coproc_reg *r) +{ + BUG_ON(!r->reg); + BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15)); + vcpu->arch.cp15[r->reg] = r->val; +} + +static inline void reset_unknown64(struct kvm_vcpu *vcpu, + const struct coproc_reg *r) +{ + BUG_ON(!r->reg); + BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.cp15)); + + vcpu->arch.cp15[r->reg] = 0xdecafbad; + vcpu->arch.cp15[r->reg+1] = 0xd0c0ffee; +} + +static inline int cmp_reg(const struct coproc_reg *i1, + const struct coproc_reg *i2) +{ + BUG_ON(i1 == i2); + if (!i1) + return 1; + else if (!i2) + return -1; + if (i1->CRn != i2->CRn) + return i1->CRn - i2->CRn; + if (i1->CRm != i2->CRm) + return i1->CRm - i2->CRm; + if (i1->Op1 != i2->Op1) + return i1->Op1 - i2->Op1; + return i1->Op2 - i2->Op2; +} + + +#define CRn(_x) .CRn = _x +#define CRm(_x) .CRm = _x +#define Op1(_x) .Op1 = _x +#define Op2(_x) .Op2 = _x +#define is64 .is_64 = true +#define is32 .is_64 = false + +#endif /* __ARM_KVM_COPROC_LOCAL_H__ */ diff --git a/arch/arm/kvm/coproc_a15.c b/arch/arm/kvm/coproc_a15.c new file mode 100644 index 0000000..685063a --- /dev/null +++ b/arch/arm/kvm/coproc_a15.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Authors: Rusty Russell <rusty@rustcorp.au> + * Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ +#include <linux/kvm_host.h> +#include <asm/cputype.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_host.h> +#include <asm/kvm_emulate.h> +#include <asm/kvm_coproc.h> +#include <linux/init.h> + +static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) +{ + /* + * Compute guest MPIDR: + * (Even if we present only one VCPU to the guest on an SMP + * host we don't set the U bit in the MPIDR, or vice versa, as + * revealing the underlying hardware properties is likely to + * be the best choice). + */ + vcpu->arch.cp15[c0_MPIDR] = (read_cpuid_mpidr() & ~MPIDR_LEVEL_MASK) + | (vcpu->vcpu_id & MPIDR_LEVEL_MASK); +} + +#include "coproc.h" + +/* A15 TRM 4.3.28: RO WI */ +static bool access_actlr(struct kvm_vcpu *vcpu, + const struct coproc_params *p, + const struct coproc_reg *r) +{ + if (p->is_write) + return ignore_write(vcpu, p); + + *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR]; + return true; +} + +/* A15 TRM 4.3.60: R/O. */ +static bool access_cbar(struct kvm_vcpu *vcpu, + const struct coproc_params *p, + const struct coproc_reg *r) +{ + if (p->is_write) + return write_to_read_only(vcpu, p); + return read_zero(vcpu, p); +} + +/* A15 TRM 4.3.48: R/O WI. */ +static bool access_l2ctlr(struct kvm_vcpu *vcpu, + const struct coproc_params *p, + const struct coproc_reg *r) +{ + if (p->is_write) + return ignore_write(vcpu, p); + + *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR]; + return true; +} + +static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) +{ + u32 l2ctlr, ncores; + + asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr)); + l2ctlr &= ~(3 << 24); + ncores = atomic_read(&vcpu->kvm->online_vcpus) - 1; + l2ctlr |= (ncores & 3) << 24; + + vcpu->arch.cp15[c9_L2CTLR] = l2ctlr; +} + +static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r) +{ + u32 actlr; + + /* ACTLR contains SMP bit: make sure you create all cpus first! */ + asm volatile("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr)); + /* Make the SMP bit consistent with the guest configuration */ + if (atomic_read(&vcpu->kvm->online_vcpus) > 1) + actlr |= 1U << 6; + else + actlr &= ~(1U << 6); + + vcpu->arch.cp15[c1_ACTLR] = actlr; +} + +/* A15 TRM 4.3.49: R/O WI (even if NSACR.NS_L2ERR, a write of 1 is ignored). */ +static bool access_l2ectlr(struct kvm_vcpu *vcpu, + const struct coproc_params *p, + const struct coproc_reg *r) +{ + if (p->is_write) + return ignore_write(vcpu, p); + + *vcpu_reg(vcpu, p->Rt1) = 0; + return true; +} + +/* + * A15-specific CP15 registers. + * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 + */ +static const struct coproc_reg a15_regs[] = { + /* MPIDR: we use VMPIDR for guest access. */ + { CRn( 0), CRm( 0), Op1( 0), Op2( 5), is32, + NULL, reset_mpidr, c0_MPIDR }, + + /* SCTLR: swapped by interrupt.S. */ + { CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32, + NULL, reset_val, c1_SCTLR, 0x00C50078 }, + /* ACTLR: trapped by HCR.TAC bit. */ + { CRn( 1), CRm( 0), Op1( 0), Op2( 1), is32, + access_actlr, reset_actlr, c1_ACTLR }, + /* CPACR: swapped by interrupt.S. */ + { CRn( 1), CRm( 0), Op1( 0), Op2( 2), is32, + NULL, reset_val, c1_CPACR, 0x00000000 }, + + /* + * L2CTLR access (guest wants to know #CPUs). + */ + { CRn( 9), CRm( 0), Op1( 1), Op2( 2), is32, + access_l2ctlr, reset_l2ctlr, c9_L2CTLR }, + { CRn( 9), CRm( 0), Op1( 1), Op2( 3), is32, access_l2ectlr}, + + /* The Configuration Base Address Register. */ + { CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar}, +}; + +static struct kvm_coproc_target_table a15_target_table = { + .target = KVM_ARM_TARGET_CORTEX_A15, + .table = a15_regs, + .num = ARRAY_SIZE(a15_regs), +}; + +static int __init coproc_a15_init(void) +{ + unsigned int i; + + for (i = 1; i < ARRAY_SIZE(a15_regs); i++) + BUG_ON(cmp_reg(&a15_regs[i-1], + &a15_regs[i]) >= 0); + + kvm_register_target_coproc_table(&a15_target_table); + return 0; +} +late_initcall(coproc_a15_init); diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c new file mode 100644 index 0000000..d61450a --- /dev/null +++ b/arch/arm/kvm/emulate.c @@ -0,0 +1,373 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/mm.h> +#include <linux/kvm_host.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_emulate.h> +#include <trace/events/kvm.h> + +#include "trace.h" + +#define VCPU_NR_MODES 6 +#define VCPU_REG_OFFSET_USR 0 +#define VCPU_REG_OFFSET_FIQ 1 +#define VCPU_REG_OFFSET_IRQ 2 +#define VCPU_REG_OFFSET_SVC 3 +#define VCPU_REG_OFFSET_ABT 4 +#define VCPU_REG_OFFSET_UND 5 +#define REG_OFFSET(_reg) \ + (offsetof(struct kvm_regs, _reg) / sizeof(u32)) + +#define USR_REG_OFFSET(_num) REG_OFFSET(usr_regs.uregs[_num]) + +static const unsigned long vcpu_reg_offsets[VCPU_NR_MODES][15] = { + /* USR/SYS Registers */ + [VCPU_REG_OFFSET_USR] = { + USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), + USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), + USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8), + USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11), + USR_REG_OFFSET(12), USR_REG_OFFSET(13), USR_REG_OFFSET(14), + }, + + /* FIQ Registers */ + [VCPU_REG_OFFSET_FIQ] = { + USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), + USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), + USR_REG_OFFSET(6), USR_REG_OFFSET(7), + REG_OFFSET(fiq_regs[0]), /* r8 */ + REG_OFFSET(fiq_regs[1]), /* r9 */ + REG_OFFSET(fiq_regs[2]), /* r10 */ + REG_OFFSET(fiq_regs[3]), /* r11 */ + REG_OFFSET(fiq_regs[4]), /* r12 */ + REG_OFFSET(fiq_regs[5]), /* r13 */ + REG_OFFSET(fiq_regs[6]), /* r14 */ + }, + + /* IRQ Registers */ + [VCPU_REG_OFFSET_IRQ] = { + USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), + USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), + USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8), + USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11), + USR_REG_OFFSET(12), + REG_OFFSET(irq_regs[0]), /* r13 */ + REG_OFFSET(irq_regs[1]), /* r14 */ + }, + + /* SVC Registers */ + [VCPU_REG_OFFSET_SVC] = { + USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), + USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), + USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8), + USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11), + USR_REG_OFFSET(12), + REG_OFFSET(svc_regs[0]), /* r13 */ + REG_OFFSET(svc_regs[1]), /* r14 */ + }, + + /* ABT Registers */ + [VCPU_REG_OFFSET_ABT] = { + USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), + USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), + USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8), + USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11), + USR_REG_OFFSET(12), + REG_OFFSET(abt_regs[0]), /* r13 */ + REG_OFFSET(abt_regs[1]), /* r14 */ + }, + + /* UND Registers */ + [VCPU_REG_OFFSET_UND] = { + USR_REG_OFFSET(0), USR_REG_OFFSET(1), USR_REG_OFFSET(2), + USR_REG_OFFSET(3), USR_REG_OFFSET(4), USR_REG_OFFSET(5), + USR_REG_OFFSET(6), USR_REG_OFFSET(7), USR_REG_OFFSET(8), + USR_REG_OFFSET(9), USR_REG_OFFSET(10), USR_REG_OFFSET(11), + USR_REG_OFFSET(12), + REG_OFFSET(und_regs[0]), /* r13 */ + REG_OFFSET(und_regs[1]), /* r14 */ + }, +}; + +/* + * Return a pointer to the register number valid in the current mode of + * the virtual CPU. + */ +u32 *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num) +{ + u32 *reg_array = (u32 *)&vcpu->arch.regs; + u32 mode = *vcpu_cpsr(vcpu) & MODE_MASK; + + switch (mode) { + case USR_MODE...SVC_MODE: + mode &= ~MODE32_BIT; /* 0 ... 3 */ + break; + + case ABT_MODE: + mode = VCPU_REG_OFFSET_ABT; + break; + + case UND_MODE: + mode = VCPU_REG_OFFSET_UND; + break; + + case SYSTEM_MODE: + mode = VCPU_REG_OFFSET_USR; + break; + + default: + BUG(); + } + + return reg_array + vcpu_reg_offsets[mode][reg_num]; +} + +/* + * Return the SPSR for the current mode of the virtual CPU. + */ +u32 *vcpu_spsr(struct kvm_vcpu *vcpu) +{ + u32 mode = *vcpu_cpsr(vcpu) & MODE_MASK; + switch (mode) { + case SVC_MODE: + return &vcpu->arch.regs.KVM_ARM_SVC_spsr; + case ABT_MODE: + return &vcpu->arch.regs.KVM_ARM_ABT_spsr; + case UND_MODE: + return &vcpu->arch.regs.KVM_ARM_UND_spsr; + case IRQ_MODE: + return &vcpu->arch.regs.KVM_ARM_IRQ_spsr; + case FIQ_MODE: + return &vcpu->arch.regs.KVM_ARM_FIQ_spsr; + default: + BUG(); + } +} + +/** + * kvm_handle_wfi - handle a wait-for-interrupts instruction executed by a guest + * @vcpu: the vcpu pointer + * @run: the kvm_run structure pointer + * + * Simply sets the wait_for_interrupts flag on the vcpu structure, which will + * halt execution of world-switches and schedule other host processes until + * there is an incoming IRQ or FIQ to the VM. + */ +int kvm_handle_wfi(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + trace_kvm_wfi(*vcpu_pc(vcpu)); + kvm_vcpu_block(vcpu); + return 1; +} + +/** + * adjust_itstate - adjust ITSTATE when emulating instructions in IT-block + * @vcpu: The VCPU pointer + * + * When exceptions occur while instructions are executed in Thumb IF-THEN + * blocks, the ITSTATE field of the CPSR is not advanved (updated), so we have + * to do this little bit of work manually. The fields map like this: + * + * IT[7:0] -> CPSR[26:25],CPSR[15:10] + */ +static void kvm_adjust_itstate(struct kvm_vcpu *vcpu) +{ + unsigned long itbits, cond; + unsigned long cpsr = *vcpu_cpsr(vcpu); + bool is_arm = !(cpsr & PSR_T_BIT); + + BUG_ON(is_arm && (cpsr & PSR_IT_MASK)); + + if (!(cpsr & PSR_IT_MASK)) + return; + + cond = (cpsr & 0xe000) >> 13; + itbits = (cpsr & 0x1c00) >> (10 - 2); + itbits |= (cpsr & (0x3 << 25)) >> 25; + + /* Perform ITAdvance (see page A-52 in ARM DDI 0406C) */ + if ((itbits & 0x7) == 0) + itbits = cond = 0; + else + itbits = (itbits << 1) & 0x1f; + + cpsr &= ~PSR_IT_MASK; + cpsr |= cond << 13; + cpsr |= (itbits & 0x1c) << (10 - 2); + cpsr |= (itbits & 0x3) << 25; + *vcpu_cpsr(vcpu) = cpsr; +} + +/** + * kvm_skip_instr - skip a trapped instruction and proceed to the next + * @vcpu: The vcpu pointer + */ +void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr) +{ + bool is_thumb; + + is_thumb = !!(*vcpu_cpsr(vcpu) & PSR_T_BIT); + if (is_thumb && !is_wide_instr) + *vcpu_pc(vcpu) += 2; + else + *vcpu_pc(vcpu) += 4; + kvm_adjust_itstate(vcpu); +} + + +/****************************************************************************** + * Inject exceptions into the guest + */ + +static u32 exc_vector_base(struct kvm_vcpu *vcpu) +{ + u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; + u32 vbar = vcpu->arch.cp15[c12_VBAR]; + + if (sctlr & SCTLR_V) + return 0xffff0000; + else /* always have security exceptions */ + return vbar; +} + +/** + * kvm_inject_undefined - inject an undefined exception into the guest + * @vcpu: The VCPU to receive the undefined exception + * + * It is assumed that this code is called from the VCPU thread and that the + * VCPU therefore is not currently executing guest code. + * + * Modelled after TakeUndefInstrException() pseudocode. + */ +void kvm_inject_undefined(struct kvm_vcpu *vcpu) +{ + u32 new_lr_value; + u32 new_spsr_value; + u32 cpsr = *vcpu_cpsr(vcpu); + u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; + bool is_thumb = (cpsr & PSR_T_BIT); + u32 vect_offset = 4; + u32 return_offset = (is_thumb) ? 2 : 4; + + new_spsr_value = cpsr; + new_lr_value = *vcpu_pc(vcpu) - return_offset; + + *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | UND_MODE; + *vcpu_cpsr(vcpu) |= PSR_I_BIT; + *vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT); + + if (sctlr & SCTLR_TE) + *vcpu_cpsr(vcpu) |= PSR_T_BIT; + if (sctlr & SCTLR_EE) + *vcpu_cpsr(vcpu) |= PSR_E_BIT; + + /* Note: These now point to UND banked copies */ + *vcpu_spsr(vcpu) = cpsr; + *vcpu_reg(vcpu, 14) = new_lr_value; + + /* Branch to exception vector */ + *vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset; +} + +/* + * Modelled after TakeDataAbortException() and TakePrefetchAbortException + * pseudocode. + */ +static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr) +{ + u32 new_lr_value; + u32 new_spsr_value; + u32 cpsr = *vcpu_cpsr(vcpu); + u32 sctlr = vcpu->arch.cp15[c1_SCTLR]; + bool is_thumb = (cpsr & PSR_T_BIT); + u32 vect_offset; + u32 return_offset = (is_thumb) ? 4 : 0; + bool is_lpae; + + new_spsr_value = cpsr; + new_lr_value = *vcpu_pc(vcpu) + return_offset; + + *vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | ABT_MODE; + *vcpu_cpsr(vcpu) |= PSR_I_BIT | PSR_A_BIT; + *vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT); + + if (sctlr & SCTLR_TE) + *vcpu_cpsr(vcpu) |= PSR_T_BIT; + if (sctlr & SCTLR_EE) + *vcpu_cpsr(vcpu) |= PSR_E_BIT; + + /* Note: These now point to ABT banked copies */ + *vcpu_spsr(vcpu) = cpsr; + *vcpu_reg(vcpu, 14) = new_lr_value; + + if (is_pabt) + vect_offset = 12; + else + vect_offset = 16; + + /* Branch to exception vector */ + *vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset; + + if (is_pabt) { + /* Set DFAR and DFSR */ + vcpu->arch.cp15[c6_IFAR] = addr; + is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31); + /* Always give debug fault for now - should give guest a clue */ + if (is_lpae) + vcpu->arch.cp15[c5_IFSR] = 1 << 9 | 0x22; + else + vcpu->arch.cp15[c5_IFSR] = 2; + } else { /* !iabt */ + /* Set DFAR and DFSR */ + vcpu->arch.cp15[c6_DFAR] = addr; + is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31); + /* Always give debug fault for now - should give guest a clue */ + if (is_lpae) + vcpu->arch.cp15[c5_DFSR] = 1 << 9 | 0x22; + else + vcpu->arch.cp15[c5_DFSR] = 2; + } + +} + +/** + * kvm_inject_dabt - inject a data abort into the guest + * @vcpu: The VCPU to receive the undefined exception + * @addr: The address to report in the DFAR + * + * It is assumed that this code is called from the VCPU thread and that the + * VCPU therefore is not currently executing guest code. + */ +void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr) +{ + inject_abt(vcpu, false, addr); +} + +/** + * kvm_inject_pabt - inject a prefetch abort into the guest + * @vcpu: The VCPU to receive the undefined exception + * @addr: The address to report in the DFAR + * + * It is assumed that this code is called from the VCPU thread and that the + * VCPU therefore is not currently executing guest code. + */ +void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr) +{ + inject_abt(vcpu, true, addr); +} diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c new file mode 100644 index 0000000..2339d96 --- /dev/null +++ b/arch/arm/kvm/guest.c @@ -0,0 +1,222 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/kvm_host.h> +#include <linux/module.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <asm/uaccess.h> +#include <asm/kvm.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_emulate.h> +#include <asm/kvm_coproc.h> + +#define VM_STAT(x) { #x, offsetof(struct kvm, stat.x), KVM_STAT_VM } +#define VCPU_STAT(x) { #x, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU } + +struct kvm_stats_debugfs_item debugfs_entries[] = { + { NULL } +}; + +int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) +{ + return 0; +} + +static u64 core_reg_offset_from_id(u64 id) +{ + return id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK | KVM_REG_ARM_CORE); +} + +static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) +{ + u32 __user *uaddr = (u32 __user *)(long)reg->addr; + struct kvm_regs *regs = &vcpu->arch.regs; + u64 off; + + if (KVM_REG_SIZE(reg->id) != 4) + return -ENOENT; + + /* Our ID is an index into the kvm_regs struct. */ + off = core_reg_offset_from_id(reg->id); + if (off >= sizeof(*regs) / KVM_REG_SIZE(reg->id)) + return -ENOENT; + + return put_user(((u32 *)regs)[off], uaddr); +} + +static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) +{ + u32 __user *uaddr = (u32 __user *)(long)reg->addr; + struct kvm_regs *regs = &vcpu->arch.regs; + u64 off, val; + + if (KVM_REG_SIZE(reg->id) != 4) + return -ENOENT; + + /* Our ID is an index into the kvm_regs struct. */ + off = core_reg_offset_from_id(reg->id); + if (off >= sizeof(*regs) / KVM_REG_SIZE(reg->id)) + return -ENOENT; + + if (get_user(val, uaddr) != 0) + return -EFAULT; + + if (off == KVM_REG_ARM_CORE_REG(usr_regs.ARM_cpsr)) { + unsigned long mode = val & MODE_MASK; + switch (mode) { + case USR_MODE: + case FIQ_MODE: + case IRQ_MODE: + case SVC_MODE: + case ABT_MODE: + case UND_MODE: + break; + default: + return -EINVAL; + } + } + + ((u32 *)regs)[off] = val; + return 0; +} + +int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) +{ + return -EINVAL; +} + +int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) +{ + return -EINVAL; +} + +static unsigned long num_core_regs(void) +{ + return sizeof(struct kvm_regs) / sizeof(u32); +} + +/** + * kvm_arm_num_regs - how many registers do we present via KVM_GET_ONE_REG + * + * This is for all registers. + */ +unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu) +{ + return num_core_regs() + kvm_arm_num_coproc_regs(vcpu); +} + +/** + * kvm_arm_copy_reg_indices - get indices of all registers. + * + * We do core registers right here, then we apppend coproc regs. + */ +int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices) +{ + unsigned int i; + const u64 core_reg = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_CORE; + + for (i = 0; i < sizeof(struct kvm_regs)/sizeof(u32); i++) { + if (put_user(core_reg | i, uindices)) + return -EFAULT; + uindices++; + } + + return kvm_arm_copy_coproc_indices(vcpu, uindices); +} + +int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) +{ + /* We currently use nothing arch-specific in upper 32 bits */ + if ((reg->id & ~KVM_REG_SIZE_MASK) >> 32 != KVM_REG_ARM >> 32) + return -EINVAL; + + /* Register group 16 means we want a core register. */ + if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_CORE) + return get_core_reg(vcpu, reg); + + return kvm_arm_coproc_get_reg(vcpu, reg); +} + +int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) +{ + /* We currently use nothing arch-specific in upper 32 bits */ + if ((reg->id & ~KVM_REG_SIZE_MASK) >> 32 != KVM_REG_ARM >> 32) + return -EINVAL; + + /* Register group 16 means we set a core register. */ + if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_CORE) + return set_core_reg(vcpu, reg); + + return kvm_arm_coproc_set_reg(vcpu, reg); +} + +int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu, + struct kvm_sregs *sregs) +{ + return -EINVAL; +} + +int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, + struct kvm_sregs *sregs) +{ + return -EINVAL; +} + +int kvm_vcpu_set_target(struct kvm_vcpu *vcpu, + const struct kvm_vcpu_init *init) +{ + unsigned int i; + + /* We can only do a cortex A15 for now. */ + if (init->target != kvm_target_cpu()) + return -EINVAL; + + vcpu->arch.target = init->target; + bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES); + + /* -ENOENT for unknown features, -EINVAL for invalid combinations. */ + for (i = 0; i < sizeof(init->features) * 8; i++) { + if (test_bit(i, (void *)init->features)) { + if (i >= KVM_VCPU_MAX_FEATURES) + return -ENOENT; + set_bit(i, vcpu->arch.features); + } + } + + /* Now we know what it is, we can reset it. */ + return kvm_reset_vcpu(vcpu); +} + +int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) +{ + return -EINVAL; +} + +int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) +{ + return -EINVAL; +} + +int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu, + struct kvm_translation *tr) +{ + return -EINVAL; +} diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S new file mode 100644 index 0000000..9f37a79 --- /dev/null +++ b/arch/arm/kvm/init.S @@ -0,0 +1,114 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/linkage.h> +#include <asm/unified.h> +#include <asm/asm-offsets.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_arm.h> + +/******************************************************************** + * Hypervisor initialization + * - should be called with: + * r0,r1 = Hypervisor pgd pointer + * r2 = top of Hyp stack (kernel VA) + * r3 = pointer to hyp vectors + */ + + .text + .pushsection .hyp.idmap.text,"ax" + .align 5 +__kvm_hyp_init: + .globl __kvm_hyp_init + + @ Hyp-mode exception vector + W(b) . + W(b) . + W(b) . + W(b) . + W(b) . + W(b) __do_hyp_init + W(b) . + W(b) . + +__do_hyp_init: + @ Set the HTTBR to point to the hypervisor PGD pointer passed + mcrr p15, 4, r0, r1, c2 + + @ Set the HTCR and VTCR to the same shareability and cacheability + @ settings as the non-secure TTBCR and with T0SZ == 0. + mrc p15, 4, r0, c2, c0, 2 @ HTCR + ldr r12, =HTCR_MASK + bic r0, r0, r12 + mrc p15, 0, r1, c2, c0, 2 @ TTBCR + and r1, r1, #(HTCR_MASK & ~TTBCR_T0SZ) + orr r0, r0, r1 + mcr p15, 4, r0, c2, c0, 2 @ HTCR + + mrc p15, 4, r1, c2, c1, 2 @ VTCR + ldr r12, =VTCR_MASK + bic r1, r1, r12 + bic r0, r0, #(~VTCR_HTCR_SH) @ clear non-reusable HTCR bits + orr r1, r0, r1 + orr r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S) + mcr p15, 4, r1, c2, c1, 2 @ VTCR + + @ Use the same memory attributes for hyp. accesses as the kernel + @ (copy MAIRx ro HMAIRx). + mrc p15, 0, r0, c10, c2, 0 + mcr p15, 4, r0, c10, c2, 0 + mrc p15, 0, r0, c10, c2, 1 + mcr p15, 4, r0, c10, c2, 1 + + @ Set the HSCTLR to: + @ - ARM/THUMB exceptions: Kernel config (Thumb-2 kernel) + @ - Endianness: Kernel config + @ - Fast Interrupt Features: Kernel config + @ - Write permission implies XN: disabled + @ - Instruction cache: enabled + @ - Data/Unified cache: enabled + @ - Memory alignment checks: enabled + @ - MMU: enabled (this code must be run from an identity mapping) + mrc p15, 4, r0, c1, c0, 0 @ HSCR + ldr r12, =HSCTLR_MASK + bic r0, r0, r12 + mrc p15, 0, r1, c1, c0, 0 @ SCTLR + ldr r12, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C) + and r1, r1, r12 + ARM( ldr r12, =(HSCTLR_M | HSCTLR_A) ) + THUMB( ldr r12, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) ) + orr r1, r1, r12 + orr r0, r0, r1 + isb + mcr p15, 4, r0, c1, c0, 0 @ HSCR + isb + + @ Set stack pointer and return to the kernel + mov sp, r2 + + @ Set HVBAR to point to the HYP vectors + mcr p15, 4, r3, c12, c0, 0 @ HVBAR + + eret + + .ltorg + + .globl __kvm_hyp_init_end +__kvm_hyp_init_end: + + .popsection diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S new file mode 100644 index 0000000..8ca87ab --- /dev/null +++ b/arch/arm/kvm/interrupts.S @@ -0,0 +1,484 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/linkage.h> +#include <linux/const.h> +#include <asm/unified.h> +#include <asm/page.h> +#include <asm/ptrace.h> +#include <asm/asm-offsets.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_arm.h> +#include <asm/vfpmacros.h> +#include "interrupts_head.S" + + .text + +__kvm_hyp_code_start: + .globl __kvm_hyp_code_start + +/******************************************************************** + * Flush per-VMID TLBs + * + * void __kvm_tlb_flush_vmid(struct kvm *kvm); + * + * We rely on the hardware to broadcast the TLB invalidation to all CPUs + * inside the inner-shareable domain (which is the case for all v7 + * implementations). If we come across a non-IS SMP implementation, we'll + * have to use an IPI based mechanism. Until then, we stick to the simple + * hardware assisted version. + */ +ENTRY(__kvm_tlb_flush_vmid) + push {r2, r3} + + add r0, r0, #KVM_VTTBR + ldrd r2, r3, [r0] + mcrr p15, 6, r2, r3, c2 @ Write VTTBR + isb + mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored) + dsb + isb + mov r2, #0 + mov r3, #0 + mcrr p15, 6, r2, r3, c2 @ Back to VMID #0 + isb @ Not necessary if followed by eret + + pop {r2, r3} + bx lr +ENDPROC(__kvm_tlb_flush_vmid) + +/******************************************************************** + * Flush TLBs and instruction caches of all CPUs inside the inner-shareable + * domain, for all VMIDs + * + * void __kvm_flush_vm_context(void); + */ +ENTRY(__kvm_flush_vm_context) + mov r0, #0 @ rn parameter for c15 flushes is SBZ + + /* Invalidate NS Non-Hyp TLB Inner Shareable (TLBIALLNSNHIS) */ + mcr p15, 4, r0, c8, c3, 4 + /* Invalidate instruction caches Inner Shareable (ICIALLUIS) */ + mcr p15, 0, r0, c7, c1, 0 + dsb + isb @ Not necessary if followed by eret + + bx lr +ENDPROC(__kvm_flush_vm_context) + + +/******************************************************************** + * Hypervisor world-switch code + * + * + * int __kvm_vcpu_run(struct kvm_vcpu *vcpu) + */ +ENTRY(__kvm_vcpu_run) + @ Save the vcpu pointer + mcr p15, 4, vcpu, c13, c0, 2 @ HTPIDR + + save_host_regs + + restore_vgic_state + restore_timer_state + + @ Store hardware CP15 state and load guest state + read_cp15_state store_to_vcpu = 0 + write_cp15_state read_from_vcpu = 1 + + @ If the host kernel has not been configured with VFPv3 support, + @ then it is safer if we deny guests from using it as well. +#ifdef CONFIG_VFPv3 + @ Set FPEXC_EN so the guest doesn't trap floating point instructions + VFPFMRX r2, FPEXC @ VMRS + push {r2} + orr r2, r2, #FPEXC_EN + VFPFMXR FPEXC, r2 @ VMSR +#endif + + @ Configure Hyp-role + configure_hyp_role vmentry + + @ Trap coprocessor CRx accesses + set_hstr vmentry + set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) + set_hdcr vmentry + + @ Write configured ID register into MIDR alias + ldr r1, [vcpu, #VCPU_MIDR] + mcr p15, 4, r1, c0, c0, 0 + + @ Write guest view of MPIDR into VMPIDR + ldr r1, [vcpu, #CP15_OFFSET(c0_MPIDR)] + mcr p15, 4, r1, c0, c0, 5 + + @ Set up guest memory translation + ldr r1, [vcpu, #VCPU_KVM] + add r1, r1, #KVM_VTTBR + ldrd r2, r3, [r1] + mcrr p15, 6, r2, r3, c2 @ Write VTTBR + + @ We're all done, just restore the GPRs and go to the guest + restore_guest_regs + clrex @ Clear exclusive monitor + eret + +__kvm_vcpu_return: + /* + * return convention: + * guest r0, r1, r2 saved on the stack + * r0: vcpu pointer + * r1: exception code + */ + save_guest_regs + + @ Set VMID == 0 + mov r2, #0 + mov r3, #0 + mcrr p15, 6, r2, r3, c2 @ Write VTTBR + + @ Don't trap coprocessor accesses for host kernel + set_hstr vmexit + set_hdcr vmexit + set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) + +#ifdef CONFIG_VFPv3 + @ Save floating point registers we if let guest use them. + tst r2, #(HCPTR_TCP(10) | HCPTR_TCP(11)) + bne after_vfp_restore + + @ Switch VFP/NEON hardware state to the host's + add r7, vcpu, #VCPU_VFP_GUEST + store_vfp_state r7 + add r7, vcpu, #VCPU_VFP_HOST + ldr r7, [r7] + restore_vfp_state r7 + +after_vfp_restore: + @ Restore FPEXC_EN which we clobbered on entry + pop {r2} + VFPFMXR FPEXC, r2 +#endif + + @ Reset Hyp-role + configure_hyp_role vmexit + + @ Let host read hardware MIDR + mrc p15, 0, r2, c0, c0, 0 + mcr p15, 4, r2, c0, c0, 0 + + @ Back to hardware MPIDR + mrc p15, 0, r2, c0, c0, 5 + mcr p15, 4, r2, c0, c0, 5 + + @ Store guest CP15 state and restore host state + read_cp15_state store_to_vcpu = 1 + write_cp15_state read_from_vcpu = 0 + + save_timer_state + save_vgic_state + + restore_host_regs + clrex @ Clear exclusive monitor + mov r0, r1 @ Return the return code + mov r1, #0 @ Clear upper bits in return value + bx lr @ return to IOCTL + +/******************************************************************** + * Call function in Hyp mode + * + * + * u64 kvm_call_hyp(void *hypfn, ...); + * + * This is not really a variadic function in the classic C-way and care must + * be taken when calling this to ensure parameters are passed in registers + * only, since the stack will change between the caller and the callee. + * + * Call the function with the first argument containing a pointer to the + * function you wish to call in Hyp mode, and subsequent arguments will be + * passed as r0, r1, and r2 (a maximum of 3 arguments in addition to the + * function pointer can be passed). The function being called must be mapped + * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are + * passed in r0 and r1. + * + * The calling convention follows the standard AAPCS: + * r0 - r3: caller save + * r12: caller save + * rest: callee save + */ +ENTRY(kvm_call_hyp) + hvc #0 + bx lr + +/******************************************************************** + * Hypervisor exception vector and handlers + * + * + * The KVM/ARM Hypervisor ABI is defined as follows: + * + * Entry to Hyp mode from the host kernel will happen _only_ when an HVC + * instruction is issued since all traps are disabled when running the host + * kernel as per the Hyp-mode initialization at boot time. + * + * HVC instructions cause a trap to the vector page + offset 0x18 (see hyp_hvc + * below) when the HVC instruction is called from SVC mode (i.e. a guest or the + * host kernel) and they cause a trap to the vector page + offset 0xc when HVC + * instructions are called from within Hyp-mode. + * + * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): + * Switching to Hyp mode is done through a simple HVC #0 instruction. The + * exception vector code will check that the HVC comes from VMID==0 and if + * so will push the necessary state (SPSR, lr_usr) on the Hyp stack. + * - r0 contains a pointer to a HYP function + * - r1, r2, and r3 contain arguments to the above function. + * - The HYP function will be called with its arguments in r0, r1 and r2. + * On HYP function return, we return directly to SVC. + * + * Note that the above is used to execute code in Hyp-mode from a host-kernel + * point of view, and is a different concept from performing a world-switch and + * executing guest code SVC mode (with a VMID != 0). + */ + +/* Handle undef, svc, pabt, or dabt by crashing with a user notice */ +.macro bad_exception exception_code, panic_str + push {r0-r2} + mrrc p15, 6, r0, r1, c2 @ Read VTTBR + lsr r1, r1, #16 + ands r1, r1, #0xff + beq 99f + + load_vcpu @ Load VCPU pointer + .if \exception_code == ARM_EXCEPTION_DATA_ABORT + mrc p15, 4, r2, c5, c2, 0 @ HSR + mrc p15, 4, r1, c6, c0, 0 @ HDFAR + str r2, [vcpu, #VCPU_HSR] + str r1, [vcpu, #VCPU_HxFAR] + .endif + .if \exception_code == ARM_EXCEPTION_PREF_ABORT + mrc p15, 4, r2, c5, c2, 0 @ HSR + mrc p15, 4, r1, c6, c0, 2 @ HIFAR + str r2, [vcpu, #VCPU_HSR] + str r1, [vcpu, #VCPU_HxFAR] + .endif + mov r1, #\exception_code + b __kvm_vcpu_return + + @ We were in the host already. Let's craft a panic-ing return to SVC. +99: mrs r2, cpsr + bic r2, r2, #MODE_MASK + orr r2, r2, #SVC_MODE +THUMB( orr r2, r2, #PSR_T_BIT ) + msr spsr_cxsf, r2 + mrs r1, ELR_hyp + ldr r2, =BSYM(panic) + msr ELR_hyp, r2 + ldr r0, =\panic_str + eret +.endm + + .text + + .align 5 +__kvm_hyp_vector: + .globl __kvm_hyp_vector + + @ Hyp-mode exception vector + W(b) hyp_reset + W(b) hyp_undef + W(b) hyp_svc + W(b) hyp_pabt + W(b) hyp_dabt + W(b) hyp_hvc + W(b) hyp_irq + W(b) hyp_fiq + + .align +hyp_reset: + b hyp_reset + + .align +hyp_undef: + bad_exception ARM_EXCEPTION_UNDEFINED, und_die_str + + .align +hyp_svc: + bad_exception ARM_EXCEPTION_HVC, svc_die_str + + .align +hyp_pabt: + bad_exception ARM_EXCEPTION_PREF_ABORT, pabt_die_str + + .align +hyp_dabt: + bad_exception ARM_EXCEPTION_DATA_ABORT, dabt_die_str + + .align +hyp_hvc: + /* + * Getting here is either becuase of a trap from a guest or from calling + * HVC from the host kernel, which means "switch to Hyp mode". + */ + push {r0, r1, r2} + + @ Check syndrome register + mrc p15, 4, r1, c5, c2, 0 @ HSR + lsr r0, r1, #HSR_EC_SHIFT +#ifdef CONFIG_VFPv3 + cmp r0, #HSR_EC_CP_0_13 + beq switch_to_guest_vfp +#endif + cmp r0, #HSR_EC_HVC + bne guest_trap @ Not HVC instr. + + /* + * Let's check if the HVC came from VMID 0 and allow simple + * switch to Hyp mode + */ + mrrc p15, 6, r0, r2, c2 + lsr r2, r2, #16 + and r2, r2, #0xff + cmp r2, #0 + bne guest_trap @ Guest called HVC + +host_switch_to_hyp: + pop {r0, r1, r2} + + push {lr} + mrs lr, SPSR + push {lr} + + mov lr, r0 + mov r0, r1 + mov r1, r2 + mov r2, r3 + +THUMB( orr lr, #1) + blx lr @ Call the HYP function + + pop {lr} + msr SPSR_csxf, lr + pop {lr} + eret + +guest_trap: + load_vcpu @ Load VCPU pointer to r0 + str r1, [vcpu, #VCPU_HSR] + + @ Check if we need the fault information + lsr r1, r1, #HSR_EC_SHIFT + cmp r1, #HSR_EC_IABT + mrceq p15, 4, r2, c6, c0, 2 @ HIFAR + beq 2f + cmp r1, #HSR_EC_DABT + bne 1f + mrc p15, 4, r2, c6, c0, 0 @ HDFAR + +2: str r2, [vcpu, #VCPU_HxFAR] + + /* + * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode: + * + * Abort on the stage 2 translation for a memory access from a + * Non-secure PL1 or PL0 mode: + * + * For any Access flag fault or Translation fault, and also for any + * Permission fault on the stage 2 translation of a memory access + * made as part of a translation table walk for a stage 1 translation, + * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR + * is UNKNOWN. + */ + + /* Check for permission fault, and S1PTW */ + mrc p15, 4, r1, c5, c2, 0 @ HSR + and r0, r1, #HSR_FSC_TYPE + cmp r0, #FSC_PERM + tsteq r1, #(1 << 7) @ S1PTW + mrcne p15, 4, r2, c6, c0, 4 @ HPFAR + bne 3f + + /* Resolve IPA using the xFAR */ + mcr p15, 0, r2, c7, c8, 0 @ ATS1CPR + isb + mrrc p15, 0, r0, r1, c7 @ PAR + tst r0, #1 + bne 4f @ Failed translation + ubfx r2, r0, #12, #20 + lsl r2, r2, #4 + orr r2, r2, r1, lsl #24 + +3: load_vcpu @ Load VCPU pointer to r0 + str r2, [r0, #VCPU_HPFAR] + +1: mov r1, #ARM_EXCEPTION_HVC + b __kvm_vcpu_return + +4: pop {r0, r1, r2} @ Failed translation, return to guest + eret + +/* + * If VFPv3 support is not available, then we will not switch the VFP + * registers; however cp10 and cp11 accesses will still trap and fallback + * to the regular coprocessor emulation code, which currently will + * inject an undefined exception to the guest. + */ +#ifdef CONFIG_VFPv3 +switch_to_guest_vfp: + load_vcpu @ Load VCPU pointer to r0 + push {r3-r7} + + @ NEON/VFP used. Turn on VFP access. + set_hcptr vmexit, (HCPTR_TCP(10) | HCPTR_TCP(11)) + + @ Switch VFP/NEON hardware state to the guest's + add r7, r0, #VCPU_VFP_HOST + ldr r7, [r7] + store_vfp_state r7 + add r7, r0, #VCPU_VFP_GUEST + restore_vfp_state r7 + + pop {r3-r7} + pop {r0-r2} + eret +#endif + + .align +hyp_irq: + push {r0, r1, r2} + mov r1, #ARM_EXCEPTION_IRQ + load_vcpu @ Load VCPU pointer to r0 + b __kvm_vcpu_return + + .align +hyp_fiq: + b hyp_fiq + + .ltorg + +__kvm_hyp_code_end: + .globl __kvm_hyp_code_end + + .section ".rodata" + +und_die_str: + .ascii "unexpected undefined exception in Hyp mode at: %#08x" +pabt_die_str: + .ascii "unexpected prefetch abort in Hyp mode at: %#08x" +dabt_die_str: + .ascii "unexpected data abort in Hyp mode at: %#08x" +svc_die_str: + .ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x" diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S new file mode 100644 index 0000000..3c8f2f0 --- /dev/null +++ b/arch/arm/kvm/interrupts_head.S @@ -0,0 +1,605 @@ +#include <linux/irqchip/arm-gic.h> + +#define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4)) +#define VCPU_USR_SP (VCPU_USR_REG(13)) +#define VCPU_USR_LR (VCPU_USR_REG(14)) +#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15 + (_cp15_reg_idx * 4)) + +/* + * Many of these macros need to access the VCPU structure, which is always + * held in r0. These macros should never clobber r1, as it is used to hold the + * exception code on the return path (except of course the macro that switches + * all the registers before the final jump to the VM). + */ +vcpu .req r0 @ vcpu pointer always in r0 + +/* Clobbers {r2-r6} */ +.macro store_vfp_state vfp_base + @ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions + VFPFMRX r2, FPEXC + @ Make sure VFP is enabled so we can touch the registers. + orr r6, r2, #FPEXC_EN + VFPFMXR FPEXC, r6 + + VFPFMRX r3, FPSCR + tst r2, #FPEXC_EX @ Check for VFP Subarchitecture + beq 1f + @ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so + @ we only need to save them if FPEXC_EX is set. + VFPFMRX r4, FPINST + tst r2, #FPEXC_FP2V + VFPFMRX r5, FPINST2, ne @ vmrsne + bic r6, r2, #FPEXC_EX @ FPEXC_EX disable + VFPFMXR FPEXC, r6 +1: + VFPFSTMIA \vfp_base, r6 @ Save VFP registers + stm \vfp_base, {r2-r5} @ Save FPEXC, FPSCR, FPINST, FPINST2 +.endm + +/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */ +.macro restore_vfp_state vfp_base + VFPFLDMIA \vfp_base, r6 @ Load VFP registers + ldm \vfp_base, {r2-r5} @ Load FPEXC, FPSCR, FPINST, FPINST2 + + VFPFMXR FPSCR, r3 + tst r2, #FPEXC_EX @ Check for VFP Subarchitecture + beq 1f + VFPFMXR FPINST, r4 + tst r2, #FPEXC_FP2V + VFPFMXR FPINST2, r5, ne +1: + VFPFMXR FPEXC, r2 @ FPEXC (last, in case !EN) +.endm + +/* These are simply for the macros to work - value don't have meaning */ +.equ usr, 0 +.equ svc, 1 +.equ abt, 2 +.equ und, 3 +.equ irq, 4 +.equ fiq, 5 + +.macro push_host_regs_mode mode + mrs r2, SP_\mode + mrs r3, LR_\mode + mrs r4, SPSR_\mode + push {r2, r3, r4} +.endm + +/* + * Store all host persistent registers on the stack. + * Clobbers all registers, in all modes, except r0 and r1. + */ +.macro save_host_regs + /* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */ + mrs r2, ELR_hyp + push {r2} + + /* usr regs */ + push {r4-r12} @ r0-r3 are always clobbered + mrs r2, SP_usr + mov r3, lr + push {r2, r3} + + push_host_regs_mode svc + push_host_regs_mode abt + push_host_regs_mode und + push_host_regs_mode irq + + /* fiq regs */ + mrs r2, r8_fiq + mrs r3, r9_fiq + mrs r4, r10_fiq + mrs r5, r11_fiq + mrs r6, r12_fiq + mrs r7, SP_fiq + mrs r8, LR_fiq + mrs r9, SPSR_fiq + push {r2-r9} +.endm + +.macro pop_host_regs_mode mode + pop {r2, r3, r4} + msr SP_\mode, r2 + msr LR_\mode, r3 + msr SPSR_\mode, r4 +.endm + +/* + * Restore all host registers from the stack. + * Clobbers all registers, in all modes, except r0 and r1. + */ +.macro restore_host_regs + pop {r2-r9} + msr r8_fiq, r2 + msr r9_fiq, r3 + msr r10_fiq, r4 + msr r11_fiq, r5 + msr r12_fiq, r6 + msr SP_fiq, r7 + msr LR_fiq, r8 + msr SPSR_fiq, r9 + + pop_host_regs_mode irq + pop_host_regs_mode und + pop_host_regs_mode abt + pop_host_regs_mode svc + + pop {r2, r3} + msr SP_usr, r2 + mov lr, r3 + pop {r4-r12} + + pop {r2} + msr ELR_hyp, r2 +.endm + +/* + * Restore SP, LR and SPSR for a given mode. offset is the offset of + * this mode's registers from the VCPU base. + * + * Assumes vcpu pointer in vcpu reg + * + * Clobbers r1, r2, r3, r4. + */ +.macro restore_guest_regs_mode mode, offset + add r1, vcpu, \offset + ldm r1, {r2, r3, r4} + msr SP_\mode, r2 + msr LR_\mode, r3 + msr SPSR_\mode, r4 +.endm + +/* + * Restore all guest registers from the vcpu struct. + * + * Assumes vcpu pointer in vcpu reg + * + * Clobbers *all* registers. + */ +.macro restore_guest_regs + restore_guest_regs_mode svc, #VCPU_SVC_REGS + restore_guest_regs_mode abt, #VCPU_ABT_REGS + restore_guest_regs_mode und, #VCPU_UND_REGS + restore_guest_regs_mode irq, #VCPU_IRQ_REGS + + add r1, vcpu, #VCPU_FIQ_REGS + ldm r1, {r2-r9} + msr r8_fiq, r2 + msr r9_fiq, r3 + msr r10_fiq, r4 + msr r11_fiq, r5 + msr r12_fiq, r6 + msr SP_fiq, r7 + msr LR_fiq, r8 + msr SPSR_fiq, r9 + + @ Load return state + ldr r2, [vcpu, #VCPU_PC] + ldr r3, [vcpu, #VCPU_CPSR] + msr ELR_hyp, r2 + msr SPSR_cxsf, r3 + + @ Load user registers + ldr r2, [vcpu, #VCPU_USR_SP] + ldr r3, [vcpu, #VCPU_USR_LR] + msr SP_usr, r2 + mov lr, r3 + add vcpu, vcpu, #(VCPU_USR_REGS) + ldm vcpu, {r0-r12} +.endm + +/* + * Save SP, LR and SPSR for a given mode. offset is the offset of + * this mode's registers from the VCPU base. + * + * Assumes vcpu pointer in vcpu reg + * + * Clobbers r2, r3, r4, r5. + */ +.macro save_guest_regs_mode mode, offset + add r2, vcpu, \offset + mrs r3, SP_\mode + mrs r4, LR_\mode + mrs r5, SPSR_\mode + stm r2, {r3, r4, r5} +.endm + +/* + * Save all guest registers to the vcpu struct + * Expects guest's r0, r1, r2 on the stack. + * + * Assumes vcpu pointer in vcpu reg + * + * Clobbers r2, r3, r4, r5. + */ +.macro save_guest_regs + @ Store usr registers + add r2, vcpu, #VCPU_USR_REG(3) + stm r2, {r3-r12} + add r2, vcpu, #VCPU_USR_REG(0) + pop {r3, r4, r5} @ r0, r1, r2 + stm r2, {r3, r4, r5} + mrs r2, SP_usr + mov r3, lr + str r2, [vcpu, #VCPU_USR_SP] + str r3, [vcpu, #VCPU_USR_LR] + + @ Store return state + mrs r2, ELR_hyp + mrs r3, spsr + str r2, [vcpu, #VCPU_PC] + str r3, [vcpu, #VCPU_CPSR] + + @ Store other guest registers + save_guest_regs_mode svc, #VCPU_SVC_REGS + save_guest_regs_mode abt, #VCPU_ABT_REGS + save_guest_regs_mode und, #VCPU_UND_REGS + save_guest_regs_mode irq, #VCPU_IRQ_REGS +.endm + +/* Reads cp15 registers from hardware and stores them in memory + * @store_to_vcpu: If 0, registers are written in-order to the stack, + * otherwise to the VCPU struct pointed to by vcpup + * + * Assumes vcpu pointer in vcpu reg + * + * Clobbers r2 - r12 + */ +.macro read_cp15_state store_to_vcpu + mrc p15, 0, r2, c1, c0, 0 @ SCTLR + mrc p15, 0, r3, c1, c0, 2 @ CPACR + mrc p15, 0, r4, c2, c0, 2 @ TTBCR + mrc p15, 0, r5, c3, c0, 0 @ DACR + mrrc p15, 0, r6, r7, c2 @ TTBR 0 + mrrc p15, 1, r8, r9, c2 @ TTBR 1 + mrc p15, 0, r10, c10, c2, 0 @ PRRR + mrc p15, 0, r11, c10, c2, 1 @ NMRR + mrc p15, 2, r12, c0, c0, 0 @ CSSELR + + .if \store_to_vcpu == 0 + push {r2-r12} @ Push CP15 registers + .else + str r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] + str r3, [vcpu, #CP15_OFFSET(c1_CPACR)] + str r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] + str r5, [vcpu, #CP15_OFFSET(c3_DACR)] + add r2, vcpu, #CP15_OFFSET(c2_TTBR0) + strd r6, r7, [r2] + add r2, vcpu, #CP15_OFFSET(c2_TTBR1) + strd r8, r9, [r2] + str r10, [vcpu, #CP15_OFFSET(c10_PRRR)] + str r11, [vcpu, #CP15_OFFSET(c10_NMRR)] + str r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] + .endif + + mrc p15, 0, r2, c13, c0, 1 @ CID + mrc p15, 0, r3, c13, c0, 2 @ TID_URW + mrc p15, 0, r4, c13, c0, 3 @ TID_URO + mrc p15, 0, r5, c13, c0, 4 @ TID_PRIV + mrc p15, 0, r6, c5, c0, 0 @ DFSR + mrc p15, 0, r7, c5, c0, 1 @ IFSR + mrc p15, 0, r8, c5, c1, 0 @ ADFSR + mrc p15, 0, r9, c5, c1, 1 @ AIFSR + mrc p15, 0, r10, c6, c0, 0 @ DFAR + mrc p15, 0, r11, c6, c0, 2 @ IFAR + mrc p15, 0, r12, c12, c0, 0 @ VBAR + + .if \store_to_vcpu == 0 + push {r2-r12} @ Push CP15 registers + .else + str r2, [vcpu, #CP15_OFFSET(c13_CID)] + str r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] + str r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] + str r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] + str r6, [vcpu, #CP15_OFFSET(c5_DFSR)] + str r7, [vcpu, #CP15_OFFSET(c5_IFSR)] + str r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] + str r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] + str r10, [vcpu, #CP15_OFFSET(c6_DFAR)] + str r11, [vcpu, #CP15_OFFSET(c6_IFAR)] + str r12, [vcpu, #CP15_OFFSET(c12_VBAR)] + .endif + + mrc p15, 0, r2, c14, c1, 0 @ CNTKCTL + + .if \store_to_vcpu == 0 + push {r2} + .else + str r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] + .endif +.endm + +/* + * Reads cp15 registers from memory and writes them to hardware + * @read_from_vcpu: If 0, registers are read in-order from the stack, + * otherwise from the VCPU struct pointed to by vcpup + * + * Assumes vcpu pointer in vcpu reg + */ +.macro write_cp15_state read_from_vcpu + .if \read_from_vcpu == 0 + pop {r2} + .else + ldr r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)] + .endif + + mcr p15, 0, r2, c14, c1, 0 @ CNTKCTL + + .if \read_from_vcpu == 0 + pop {r2-r12} + .else + ldr r2, [vcpu, #CP15_OFFSET(c13_CID)] + ldr r3, [vcpu, #CP15_OFFSET(c13_TID_URW)] + ldr r4, [vcpu, #CP15_OFFSET(c13_TID_URO)] + ldr r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)] + ldr r6, [vcpu, #CP15_OFFSET(c5_DFSR)] + ldr r7, [vcpu, #CP15_OFFSET(c5_IFSR)] + ldr r8, [vcpu, #CP15_OFFSET(c5_ADFSR)] + ldr r9, [vcpu, #CP15_OFFSET(c5_AIFSR)] + ldr r10, [vcpu, #CP15_OFFSET(c6_DFAR)] + ldr r11, [vcpu, #CP15_OFFSET(c6_IFAR)] + ldr r12, [vcpu, #CP15_OFFSET(c12_VBAR)] + .endif + + mcr p15, 0, r2, c13, c0, 1 @ CID + mcr p15, 0, r3, c13, c0, 2 @ TID_URW + mcr p15, 0, r4, c13, c0, 3 @ TID_URO + mcr p15, 0, r5, c13, c0, 4 @ TID_PRIV + mcr p15, 0, r6, c5, c0, 0 @ DFSR + mcr p15, 0, r7, c5, c0, 1 @ IFSR + mcr p15, 0, r8, c5, c1, 0 @ ADFSR + mcr p15, 0, r9, c5, c1, 1 @ AIFSR + mcr p15, 0, r10, c6, c0, 0 @ DFAR + mcr p15, 0, r11, c6, c0, 2 @ IFAR + mcr p15, 0, r12, c12, c0, 0 @ VBAR + + .if \read_from_vcpu == 0 + pop {r2-r12} + .else + ldr r2, [vcpu, #CP15_OFFSET(c1_SCTLR)] + ldr r3, [vcpu, #CP15_OFFSET(c1_CPACR)] + ldr r4, [vcpu, #CP15_OFFSET(c2_TTBCR)] + ldr r5, [vcpu, #CP15_OFFSET(c3_DACR)] + add r12, vcpu, #CP15_OFFSET(c2_TTBR0) + ldrd r6, r7, [r12] + add r12, vcpu, #CP15_OFFSET(c2_TTBR1) + ldrd r8, r9, [r12] + ldr r10, [vcpu, #CP15_OFFSET(c10_PRRR)] + ldr r11, [vcpu, #CP15_OFFSET(c10_NMRR)] + ldr r12, [vcpu, #CP15_OFFSET(c0_CSSELR)] + .endif + + mcr p15, 0, r2, c1, c0, 0 @ SCTLR + mcr p15, 0, r3, c1, c0, 2 @ CPACR + mcr p15, 0, r4, c2, c0, 2 @ TTBCR + mcr p15, 0, r5, c3, c0, 0 @ DACR + mcrr p15, 0, r6, r7, c2 @ TTBR 0 + mcrr p15, 1, r8, r9, c2 @ TTBR 1 + mcr p15, 0, r10, c10, c2, 0 @ PRRR + mcr p15, 0, r11, c10, c2, 1 @ NMRR + mcr p15, 2, r12, c0, c0, 0 @ CSSELR +.endm + +/* + * Save the VGIC CPU state into memory + * + * Assumes vcpu pointer in vcpu reg + */ +.macro save_vgic_state +#ifdef CONFIG_KVM_ARM_VGIC + /* Get VGIC VCTRL base into r2 */ + ldr r2, [vcpu, #VCPU_KVM] + ldr r2, [r2, #KVM_VGIC_VCTRL] + cmp r2, #0 + beq 2f + + /* Compute the address of struct vgic_cpu */ + add r11, vcpu, #VCPU_VGIC_CPU + + /* Save all interesting registers */ + ldr r3, [r2, #GICH_HCR] + ldr r4, [r2, #GICH_VMCR] + ldr r5, [r2, #GICH_MISR] + ldr r6, [r2, #GICH_EISR0] + ldr r7, [r2, #GICH_EISR1] + ldr r8, [r2, #GICH_ELRSR0] + ldr r9, [r2, #GICH_ELRSR1] + ldr r10, [r2, #GICH_APR] + + str r3, [r11, #VGIC_CPU_HCR] + str r4, [r11, #VGIC_CPU_VMCR] + str r5, [r11, #VGIC_CPU_MISR] + str r6, [r11, #VGIC_CPU_EISR] + str r7, [r11, #(VGIC_CPU_EISR + 4)] + str r8, [r11, #VGIC_CPU_ELRSR] + str r9, [r11, #(VGIC_CPU_ELRSR + 4)] + str r10, [r11, #VGIC_CPU_APR] + + /* Clear GICH_HCR */ + mov r5, #0 + str r5, [r2, #GICH_HCR] + + /* Save list registers */ + add r2, r2, #GICH_LR0 + add r3, r11, #VGIC_CPU_LR + ldr r4, [r11, #VGIC_CPU_NR_LR] +1: ldr r6, [r2], #4 + str r6, [r3], #4 + subs r4, r4, #1 + bne 1b +2: +#endif +.endm + +/* + * Restore the VGIC CPU state from memory + * + * Assumes vcpu pointer in vcpu reg + */ +.macro restore_vgic_state +#ifdef CONFIG_KVM_ARM_VGIC + /* Get VGIC VCTRL base into r2 */ + ldr r2, [vcpu, #VCPU_KVM] + ldr r2, [r2, #KVM_VGIC_VCTRL] + cmp r2, #0 + beq 2f + + /* Compute the address of struct vgic_cpu */ + add r11, vcpu, #VCPU_VGIC_CPU + + /* We only restore a minimal set of registers */ + ldr r3, [r11, #VGIC_CPU_HCR] + ldr r4, [r11, #VGIC_CPU_VMCR] + ldr r8, [r11, #VGIC_CPU_APR] + + str r3, [r2, #GICH_HCR] + str r4, [r2, #GICH_VMCR] + str r8, [r2, #GICH_APR] + + /* Restore list registers */ + add r2, r2, #GICH_LR0 + add r3, r11, #VGIC_CPU_LR + ldr r4, [r11, #VGIC_CPU_NR_LR] +1: ldr r6, [r3], #4 + str r6, [r2], #4 + subs r4, r4, #1 + bne 1b +2: +#endif +.endm + +#define CNTHCTL_PL1PCTEN (1 << 0) +#define CNTHCTL_PL1PCEN (1 << 1) + +/* + * Save the timer state onto the VCPU and allow physical timer/counter access + * for the host. + * + * Assumes vcpu pointer in vcpu reg + * Clobbers r2-r5 + */ +.macro save_timer_state +#ifdef CONFIG_KVM_ARM_TIMER + ldr r4, [vcpu, #VCPU_KVM] + ldr r2, [r4, #KVM_TIMER_ENABLED] + cmp r2, #0 + beq 1f + + mrc p15, 0, r2, c14, c3, 1 @ CNTV_CTL + str r2, [vcpu, #VCPU_TIMER_CNTV_CTL] + bic r2, #1 @ Clear ENABLE + mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL + isb + + mrrc p15, 3, r2, r3, c14 @ CNTV_CVAL + ldr r4, =VCPU_TIMER_CNTV_CVAL + add r5, vcpu, r4 + strd r2, r3, [r5] + +1: +#endif + @ Allow physical timer/counter access for the host + mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL + orr r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN) + mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL +.endm + +/* + * Load the timer state from the VCPU and deny physical timer/counter access + * for the host. + * + * Assumes vcpu pointer in vcpu reg + * Clobbers r2-r5 + */ +.macro restore_timer_state + @ Disallow physical timer access for the guest + @ Physical counter access is allowed + mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL + orr r2, r2, #CNTHCTL_PL1PCTEN + bic r2, r2, #CNTHCTL_PL1PCEN + mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL + +#ifdef CONFIG_KVM_ARM_TIMER + ldr r4, [vcpu, #VCPU_KVM] + ldr r2, [r4, #KVM_TIMER_ENABLED] + cmp r2, #0 + beq 1f + + ldr r2, [r4, #KVM_TIMER_CNTVOFF] + ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)] + mcrr p15, 4, r2, r3, c14 @ CNTVOFF + + ldr r4, =VCPU_TIMER_CNTV_CVAL + add r5, vcpu, r4 + ldrd r2, r3, [r5] + mcrr p15, 3, r2, r3, c14 @ CNTV_CVAL + isb + + ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL] + and r2, r2, #3 + mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL +1: +#endif +.endm + +.equ vmentry, 0 +.equ vmexit, 1 + +/* Configures the HSTR (Hyp System Trap Register) on entry/return + * (hardware reset value is 0) */ +.macro set_hstr operation + mrc p15, 4, r2, c1, c1, 3 + ldr r3, =HSTR_T(15) + .if \operation == vmentry + orr r2, r2, r3 @ Trap CR{15} + .else + bic r2, r2, r3 @ Don't trap any CRx accesses + .endif + mcr p15, 4, r2, c1, c1, 3 +.endm + +/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return + * (hardware reset value is 0). Keep previous value in r2. */ +.macro set_hcptr operation, mask + mrc p15, 4, r2, c1, c1, 2 + ldr r3, =\mask + .if \operation == vmentry + orr r3, r2, r3 @ Trap coproc-accesses defined in mask + .else + bic r3, r2, r3 @ Don't trap defined coproc-accesses + .endif + mcr p15, 4, r3, c1, c1, 2 +.endm + +/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return + * (hardware reset value is 0) */ +.macro set_hdcr operation + mrc p15, 4, r2, c1, c1, 1 + ldr r3, =(HDCR_TPM|HDCR_TPMCR) + .if \operation == vmentry + orr r2, r2, r3 @ Trap some perfmon accesses + .else + bic r2, r2, r3 @ Don't trap any perfmon accesses + .endif + mcr p15, 4, r2, c1, c1, 1 +.endm + +/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */ +.macro configure_hyp_role operation + mrc p15, 4, r2, c1, c1, 0 @ HCR + bic r2, r2, #HCR_VIRT_EXCP_MASK + ldr r3, =HCR_GUEST_MASK + .if \operation == vmentry + orr r2, r2, r3 + ldr r3, [vcpu, #VCPU_IRQ_LINES] + orr r2, r2, r3 + .else + bic r2, r2, r3 + .endif + mcr p15, 4, r2, c1, c1, 0 +.endm + +.macro load_vcpu + mrc p15, 4, vcpu, c13, c0, 2 @ HTPIDR +.endm diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c new file mode 100644 index 0000000..98a870f --- /dev/null +++ b/arch/arm/kvm/mmio.c @@ -0,0 +1,156 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/kvm_host.h> +#include <asm/kvm_mmio.h> +#include <asm/kvm_emulate.h> +#include <trace/events/kvm.h> + +#include "trace.h" + +/** + * kvm_handle_mmio_return -- Handle MMIO loads after user space emulation + * @vcpu: The VCPU pointer + * @run: The VCPU run struct containing the mmio data + * + * This should only be called after returning from userspace for MMIO load + * emulation. + */ +int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + __u32 *dest; + unsigned int len; + int mask; + + if (!run->mmio.is_write) { + dest = vcpu_reg(vcpu, vcpu->arch.mmio_decode.rt); + memset(dest, 0, sizeof(int)); + + len = run->mmio.len; + if (len > 4) + return -EINVAL; + + memcpy(dest, run->mmio.data, len); + + trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr, + *((u64 *)run->mmio.data)); + + if (vcpu->arch.mmio_decode.sign_extend && len < 4) { + mask = 1U << ((len * 8) - 1); + *dest = (*dest ^ mask) - mask; + } + } + + return 0; +} + +static int decode_hsr(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, + struct kvm_exit_mmio *mmio) +{ + unsigned long rt, len; + bool is_write, sign_extend; + + if ((vcpu->arch.hsr >> 8) & 1) { + /* cache operation on I/O addr, tell guest unsupported */ + kvm_inject_dabt(vcpu, vcpu->arch.hxfar); + return 1; + } + + if ((vcpu->arch.hsr >> 7) & 1) { + /* page table accesses IO mem: tell guest to fix its TTBR */ + kvm_inject_dabt(vcpu, vcpu->arch.hxfar); + return 1; + } + + switch ((vcpu->arch.hsr >> 22) & 0x3) { + case 0: + len = 1; + break; + case 1: + len = 2; + break; + case 2: + len = 4; + break; + default: + kvm_err("Hardware is weird: SAS 0b11 is reserved\n"); + return -EFAULT; + } + + is_write = vcpu->arch.hsr & HSR_WNR; + sign_extend = vcpu->arch.hsr & HSR_SSE; + rt = (vcpu->arch.hsr & HSR_SRT_MASK) >> HSR_SRT_SHIFT; + + if (kvm_vcpu_reg_is_pc(vcpu, rt)) { + /* IO memory trying to read/write pc */ + kvm_inject_pabt(vcpu, vcpu->arch.hxfar); + return 1; + } + + mmio->is_write = is_write; + mmio->phys_addr = fault_ipa; + mmio->len = len; + vcpu->arch.mmio_decode.sign_extend = sign_extend; + vcpu->arch.mmio_decode.rt = rt; + + /* + * The MMIO instruction is emulated and should not be re-executed + * in the guest. + */ + kvm_skip_instr(vcpu, (vcpu->arch.hsr >> 25) & 1); + return 0; +} + +int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, + phys_addr_t fault_ipa) +{ + struct kvm_exit_mmio mmio; + unsigned long rt; + int ret; + + /* + * Prepare MMIO operation. First stash it in a private + * structure that we can use for in-kernel emulation. If the + * kernel can't handle it, copy it into run->mmio and let user + * space do its magic. + */ + + if (vcpu->arch.hsr & HSR_ISV) { + ret = decode_hsr(vcpu, fault_ipa, &mmio); + if (ret) + return ret; + } else { + kvm_err("load/store instruction decoding not implemented\n"); + return -ENOSYS; + } + + rt = vcpu->arch.mmio_decode.rt; + trace_kvm_mmio((mmio.is_write) ? KVM_TRACE_MMIO_WRITE : + KVM_TRACE_MMIO_READ_UNSATISFIED, + mmio.len, fault_ipa, + (mmio.is_write) ? *vcpu_reg(vcpu, rt) : 0); + + if (mmio.is_write) + memcpy(mmio.data, vcpu_reg(vcpu, rt), mmio.len); + + if (vgic_handle_mmio(vcpu, run, &mmio)) + return 1; + + kvm_prepare_mmio(run, &mmio); + return 0; +} diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c new file mode 100644 index 0000000..99e07c7 --- /dev/null +++ b/arch/arm/kvm/mmu.c @@ -0,0 +1,782 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/mman.h> +#include <linux/kvm_host.h> +#include <linux/io.h> +#include <trace/events/kvm.h> +#include <asm/idmap.h> +#include <asm/pgalloc.h> +#include <asm/cacheflush.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_mmu.h> +#include <asm/kvm_mmio.h> +#include <asm/kvm_asm.h> +#include <asm/kvm_emulate.h> +#include <asm/mach/map.h> +#include <trace/events/kvm.h> + +#include "trace.h" + +extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; + +static DEFINE_MUTEX(kvm_hyp_pgd_mutex); + +static void kvm_tlb_flush_vmid(struct kvm *kvm) +{ + kvm_call_hyp(__kvm_tlb_flush_vmid, kvm); +} + +static void kvm_set_pte(pte_t *pte, pte_t new_pte) +{ + pte_val(*pte) = new_pte; + /* + * flush_pmd_entry just takes a void pointer and cleans the necessary + * cache entries, so we can reuse the function for ptes. + */ + flush_pmd_entry(pte); +} + +static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache, + int min, int max) +{ + void *page; + + BUG_ON(max > KVM_NR_MEM_OBJS); + if (cache->nobjs >= min) + return 0; + while (cache->nobjs < max) { + page = (void *)__get_free_page(PGALLOC_GFP); + if (!page) + return -ENOMEM; + cache->objects[cache->nobjs++] = page; + } + return 0; +} + +static void mmu_free_memory_cache(struct kvm_mmu_memory_cache *mc) +{ + while (mc->nobjs) + free_page((unsigned long)mc->objects[--mc->nobjs]); +} + +static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) +{ + void *p; + + BUG_ON(!mc || !mc->nobjs); + p = mc->objects[--mc->nobjs]; + return p; +} + +static void free_ptes(pmd_t *pmd, unsigned long addr) +{ + pte_t *pte; + unsigned int i; + + for (i = 0; i < PTRS_PER_PMD; i++, addr += PMD_SIZE) { + if (!pmd_none(*pmd) && pmd_table(*pmd)) { + pte = pte_offset_kernel(pmd, addr); + pte_free_kernel(NULL, pte); + } + pmd++; + } +} + +/** + * free_hyp_pmds - free a Hyp-mode level-2 tables and child level-3 tables + * + * Assumes this is a page table used strictly in Hyp-mode and therefore contains + * only mappings in the kernel memory area, which is above PAGE_OFFSET. + */ +void free_hyp_pmds(void) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + unsigned long addr; + + mutex_lock(&kvm_hyp_pgd_mutex); + for (addr = PAGE_OFFSET; addr != 0; addr += PGDIR_SIZE) { + pgd = hyp_pgd + pgd_index(addr); + pud = pud_offset(pgd, addr); + + if (pud_none(*pud)) + continue; + BUG_ON(pud_bad(*pud)); + + pmd = pmd_offset(pud, addr); + free_ptes(pmd, addr); + pmd_free(NULL, pmd); + pud_clear(pud); + } + mutex_unlock(&kvm_hyp_pgd_mutex); +} + +static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start, + unsigned long end) +{ + pte_t *pte; + unsigned long addr; + struct page *page; + + for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) { + pte = pte_offset_kernel(pmd, addr); + BUG_ON(!virt_addr_valid(addr)); + page = virt_to_page(addr); + kvm_set_pte(pte, mk_pte(page, PAGE_HYP)); + } +} + +static void create_hyp_io_pte_mappings(pmd_t *pmd, unsigned long start, + unsigned long end, + unsigned long *pfn_base) +{ + pte_t *pte; + unsigned long addr; + + for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) { + pte = pte_offset_kernel(pmd, addr); + BUG_ON(pfn_valid(*pfn_base)); + kvm_set_pte(pte, pfn_pte(*pfn_base, PAGE_HYP_DEVICE)); + (*pfn_base)++; + } +} + +static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start, + unsigned long end, unsigned long *pfn_base) +{ + pmd_t *pmd; + pte_t *pte; + unsigned long addr, next; + + for (addr = start; addr < end; addr = next) { + pmd = pmd_offset(pud, addr); + + BUG_ON(pmd_sect(*pmd)); + + if (pmd_none(*pmd)) { + pte = pte_alloc_one_kernel(NULL, addr); + if (!pte) { + kvm_err("Cannot allocate Hyp pte\n"); + return -ENOMEM; + } + pmd_populate_kernel(NULL, pmd, pte); + } + + next = pmd_addr_end(addr, end); + + /* + * If pfn_base is NULL, we map kernel pages into HYP with the + * virtual address. Otherwise, this is considered an I/O + * mapping and we map the physical region starting at + * *pfn_base to [start, end[. + */ + if (!pfn_base) + create_hyp_pte_mappings(pmd, addr, next); + else + create_hyp_io_pte_mappings(pmd, addr, next, pfn_base); + } + + return 0; +} + +static int __create_hyp_mappings(void *from, void *to, unsigned long *pfn_base) +{ + unsigned long start = (unsigned long)from; + unsigned long end = (unsigned long)to; + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + unsigned long addr, next; + int err = 0; + + BUG_ON(start > end); + if (start < PAGE_OFFSET) + return -EINVAL; + + mutex_lock(&kvm_hyp_pgd_mutex); + for (addr = start; addr < end; addr = next) { + pgd = hyp_pgd + pgd_index(addr); + pud = pud_offset(pgd, addr); + + if (pud_none_or_clear_bad(pud)) { + pmd = pmd_alloc_one(NULL, addr); + if (!pmd) { + kvm_err("Cannot allocate Hyp pmd\n"); + err = -ENOMEM; + goto out; + } + pud_populate(NULL, pud, pmd); + } + + next = pgd_addr_end(addr, end); + err = create_hyp_pmd_mappings(pud, addr, next, pfn_base); + if (err) + goto out; + } +out: + mutex_unlock(&kvm_hyp_pgd_mutex); + return err; +} + +/** + * create_hyp_mappings - map a kernel virtual address range in Hyp mode + * @from: The virtual kernel start address of the range + * @to: The virtual kernel end address of the range (exclusive) + * + * The same virtual address as the kernel virtual address is also used in + * Hyp-mode mapping to the same underlying physical pages. + * + * Note: Wrapping around zero in the "to" address is not supported. + */ +int create_hyp_mappings(void *from, void *to) +{ + return __create_hyp_mappings(from, to, NULL); +} + +/** + * create_hyp_io_mappings - map a physical IO range in Hyp mode + * @from: The virtual HYP start address of the range + * @to: The virtual HYP end address of the range (exclusive) + * @addr: The physical start address which gets mapped + */ +int create_hyp_io_mappings(void *from, void *to, phys_addr_t addr) +{ + unsigned long pfn = __phys_to_pfn(addr); + return __create_hyp_mappings(from, to, &pfn); +} + +/** + * kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation. + * @kvm: The KVM struct pointer for the VM. + * + * Allocates the 1st level table only of size defined by S2_PGD_ORDER (can + * support either full 40-bit input addresses or limited to 32-bit input + * addresses). Clears the allocated pages. + * + * Note we don't need locking here as this is only called when the VM is + * created, which can only be done once. + */ +int kvm_alloc_stage2_pgd(struct kvm *kvm) +{ + pgd_t *pgd; + + if (kvm->arch.pgd != NULL) { + kvm_err("kvm_arch already initialized?\n"); + return -EINVAL; + } + + pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, S2_PGD_ORDER); + if (!pgd) + return -ENOMEM; + + /* stage-2 pgd must be aligned to its size */ + VM_BUG_ON((unsigned long)pgd & (S2_PGD_SIZE - 1)); + + memset(pgd, 0, PTRS_PER_S2_PGD * sizeof(pgd_t)); + clean_dcache_area(pgd, PTRS_PER_S2_PGD * sizeof(pgd_t)); + kvm->arch.pgd = pgd; + + return 0; +} + +static void clear_pud_entry(pud_t *pud) +{ + pmd_t *pmd_table = pmd_offset(pud, 0); + pud_clear(pud); + pmd_free(NULL, pmd_table); + put_page(virt_to_page(pud)); +} + +static void clear_pmd_entry(pmd_t *pmd) +{ + pte_t *pte_table = pte_offset_kernel(pmd, 0); + pmd_clear(pmd); + pte_free_kernel(NULL, pte_table); + put_page(virt_to_page(pmd)); +} + +static bool pmd_empty(pmd_t *pmd) +{ + struct page *pmd_page = virt_to_page(pmd); + return page_count(pmd_page) == 1; +} + +static void clear_pte_entry(pte_t *pte) +{ + if (pte_present(*pte)) { + kvm_set_pte(pte, __pte(0)); + put_page(virt_to_page(pte)); + } +} + +static bool pte_empty(pte_t *pte) +{ + struct page *pte_page = virt_to_page(pte); + return page_count(pte_page) == 1; +} + +/** + * unmap_stage2_range -- Clear stage2 page table entries to unmap a range + * @kvm: The VM pointer + * @start: The intermediate physical base address of the range to unmap + * @size: The size of the area to unmap + * + * Clear a range of stage-2 mappings, lowering the various ref-counts. Must + * be called while holding mmu_lock (unless for freeing the stage2 pgd before + * destroying the VM), otherwise another faulting VCPU may come in and mess + * with things behind our backs. + */ +static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + phys_addr_t addr = start, end = start + size; + u64 range; + + while (addr < end) { + pgd = kvm->arch.pgd + pgd_index(addr); + pud = pud_offset(pgd, addr); + if (pud_none(*pud)) { + addr += PUD_SIZE; + continue; + } + + pmd = pmd_offset(pud, addr); + if (pmd_none(*pmd)) { + addr += PMD_SIZE; + continue; + } + + pte = pte_offset_kernel(pmd, addr); + clear_pte_entry(pte); + range = PAGE_SIZE; + + /* If we emptied the pte, walk back up the ladder */ + if (pte_empty(pte)) { + clear_pmd_entry(pmd); + range = PMD_SIZE; + if (pmd_empty(pmd)) { + clear_pud_entry(pud); + range = PUD_SIZE; + } + } + + addr += range; + } +} + +/** + * kvm_free_stage2_pgd - free all stage-2 tables + * @kvm: The KVM struct pointer for the VM. + * + * Walks the level-1 page table pointed to by kvm->arch.pgd and frees all + * underlying level-2 and level-3 tables before freeing the actual level-1 table + * and setting the struct pointer to NULL. + * + * Note we don't need locking here as this is only called when the VM is + * destroyed, which can only be done once. + */ +void kvm_free_stage2_pgd(struct kvm *kvm) +{ + if (kvm->arch.pgd == NULL) + return; + + unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE); + free_pages((unsigned long)kvm->arch.pgd, S2_PGD_ORDER); + kvm->arch.pgd = NULL; +} + + +static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache, + phys_addr_t addr, const pte_t *new_pte, bool iomap) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte, old_pte; + + /* Create 2nd stage page table mapping - Level 1 */ + pgd = kvm->arch.pgd + pgd_index(addr); + pud = pud_offset(pgd, addr); + if (pud_none(*pud)) { + if (!cache) + return 0; /* ignore calls from kvm_set_spte_hva */ + pmd = mmu_memory_cache_alloc(cache); + pud_populate(NULL, pud, pmd); + pmd += pmd_index(addr); + get_page(virt_to_page(pud)); + } else + pmd = pmd_offset(pud, addr); + + /* Create 2nd stage page table mapping - Level 2 */ + if (pmd_none(*pmd)) { + if (!cache) + return 0; /* ignore calls from kvm_set_spte_hva */ + pte = mmu_memory_cache_alloc(cache); + clean_pte_table(pte); + pmd_populate_kernel(NULL, pmd, pte); + pte += pte_index(addr); + get_page(virt_to_page(pmd)); + } else + pte = pte_offset_kernel(pmd, addr); + + if (iomap && pte_present(*pte)) + return -EFAULT; + + /* Create 2nd stage page table mapping - Level 3 */ + old_pte = *pte; + kvm_set_pte(pte, *new_pte); + if (pte_present(old_pte)) + kvm_tlb_flush_vmid(kvm); + else + get_page(virt_to_page(pte)); + + return 0; +} + +/** + * kvm_phys_addr_ioremap - map a device range to guest IPA + * + * @kvm: The KVM pointer + * @guest_ipa: The IPA at which to insert the mapping + * @pa: The physical address of the device + * @size: The size of the mapping + */ +int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa, + phys_addr_t pa, unsigned long size) +{ + phys_addr_t addr, end; + int ret = 0; + unsigned long pfn; + struct kvm_mmu_memory_cache cache = { 0, }; + + end = (guest_ipa + size + PAGE_SIZE - 1) & PAGE_MASK; + pfn = __phys_to_pfn(pa); + + for (addr = guest_ipa; addr < end; addr += PAGE_SIZE) { + pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE | L_PTE_S2_RDWR); + + ret = mmu_topup_memory_cache(&cache, 2, 2); + if (ret) + goto out; + spin_lock(&kvm->mmu_lock); + ret = stage2_set_pte(kvm, &cache, addr, &pte, true); + spin_unlock(&kvm->mmu_lock); + if (ret) + goto out; + + pfn++; + } + +out: + mmu_free_memory_cache(&cache); + return ret; +} + +static void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn) +{ + /* + * If we are going to insert an instruction page and the icache is + * either VIPT or PIPT, there is a potential problem where the host + * (or another VM) may have used the same page as this guest, and we + * read incorrect data from the icache. If we're using a PIPT cache, + * we can invalidate just that page, but if we are using a VIPT cache + * we need to invalidate the entire icache - damn shame - as written + * in the ARM ARM (DDI 0406C.b - Page B3-1393). + * + * VIVT caches are tagged using both the ASID and the VMID and doesn't + * need any kind of flushing (DDI 0406C.b - Page B3-1392). + */ + if (icache_is_pipt()) { + unsigned long hva = gfn_to_hva(kvm, gfn); + __cpuc_coherent_user_range(hva, hva + PAGE_SIZE); + } else if (!icache_is_vivt_asid_tagged()) { + /* any kind of VIPT cache */ + __flush_icache_all(); + } +} + +static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, + gfn_t gfn, struct kvm_memory_slot *memslot, + unsigned long fault_status) +{ + pte_t new_pte; + pfn_t pfn; + int ret; + bool write_fault, writable; + unsigned long mmu_seq; + struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache; + + write_fault = kvm_is_write_fault(vcpu->arch.hsr); + if (fault_status == FSC_PERM && !write_fault) { + kvm_err("Unexpected L2 read permission error\n"); + return -EFAULT; + } + + /* We need minimum second+third level pages */ + ret = mmu_topup_memory_cache(memcache, 2, KVM_NR_MEM_OBJS); + if (ret) + return ret; + + mmu_seq = vcpu->kvm->mmu_notifier_seq; + /* + * Ensure the read of mmu_notifier_seq happens before we call + * gfn_to_pfn_prot (which calls get_user_pages), so that we don't risk + * the page we just got a reference to gets unmapped before we have a + * chance to grab the mmu_lock, which ensure that if the page gets + * unmapped afterwards, the call to kvm_unmap_hva will take it away + * from us again properly. This smp_rmb() interacts with the smp_wmb() + * in kvm_mmu_notifier_invalidate_<page|range_end>. + */ + smp_rmb(); + + pfn = gfn_to_pfn_prot(vcpu->kvm, gfn, write_fault, &writable); + if (is_error_pfn(pfn)) + return -EFAULT; + + new_pte = pfn_pte(pfn, PAGE_S2); + coherent_icache_guest_page(vcpu->kvm, gfn); + + spin_lock(&vcpu->kvm->mmu_lock); + if (mmu_notifier_retry(vcpu->kvm, mmu_seq)) + goto out_unlock; + if (writable) { + pte_val(new_pte) |= L_PTE_S2_RDWR; + kvm_set_pfn_dirty(pfn); + } + stage2_set_pte(vcpu->kvm, memcache, fault_ipa, &new_pte, false); + +out_unlock: + spin_unlock(&vcpu->kvm->mmu_lock); + kvm_release_pfn_clean(pfn); + return 0; +} + +/** + * kvm_handle_guest_abort - handles all 2nd stage aborts + * @vcpu: the VCPU pointer + * @run: the kvm_run structure + * + * Any abort that gets to the host is almost guaranteed to be caused by a + * missing second stage translation table entry, which can mean that either the + * guest simply needs more memory and we must allocate an appropriate page or it + * can mean that the guest tried to access I/O memory, which is emulated by user + * space. The distinction is based on the IPA causing the fault and whether this + * memory region has been registered as standard RAM by user space. + */ +int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + unsigned long hsr_ec; + unsigned long fault_status; + phys_addr_t fault_ipa; + struct kvm_memory_slot *memslot; + bool is_iabt; + gfn_t gfn; + int ret, idx; + + hsr_ec = vcpu->arch.hsr >> HSR_EC_SHIFT; + is_iabt = (hsr_ec == HSR_EC_IABT); + fault_ipa = ((phys_addr_t)vcpu->arch.hpfar & HPFAR_MASK) << 8; + + trace_kvm_guest_fault(*vcpu_pc(vcpu), vcpu->arch.hsr, + vcpu->arch.hxfar, fault_ipa); + + /* Check the stage-2 fault is trans. fault or write fault */ + fault_status = (vcpu->arch.hsr & HSR_FSC_TYPE); + if (fault_status != FSC_FAULT && fault_status != FSC_PERM) { + kvm_err("Unsupported fault status: EC=%#lx DFCS=%#lx\n", + hsr_ec, fault_status); + return -EFAULT; + } + + idx = srcu_read_lock(&vcpu->kvm->srcu); + + gfn = fault_ipa >> PAGE_SHIFT; + if (!kvm_is_visible_gfn(vcpu->kvm, gfn)) { + if (is_iabt) { + /* Prefetch Abort on I/O address */ + kvm_inject_pabt(vcpu, vcpu->arch.hxfar); + ret = 1; + goto out_unlock; + } + + if (fault_status != FSC_FAULT) { + kvm_err("Unsupported fault status on io memory: %#lx\n", + fault_status); + ret = -EFAULT; + goto out_unlock; + } + + /* Adjust page offset */ + fault_ipa |= vcpu->arch.hxfar & ~PAGE_MASK; + ret = io_mem_abort(vcpu, run, fault_ipa); + goto out_unlock; + } + + memslot = gfn_to_memslot(vcpu->kvm, gfn); + + ret = user_mem_abort(vcpu, fault_ipa, gfn, memslot, fault_status); + if (ret == 0) + ret = 1; +out_unlock: + srcu_read_unlock(&vcpu->kvm->srcu, idx); + return ret; +} + +static void handle_hva_to_gpa(struct kvm *kvm, + unsigned long start, + unsigned long end, + void (*handler)(struct kvm *kvm, + gpa_t gpa, void *data), + void *data) +{ + struct kvm_memslots *slots; + struct kvm_memory_slot *memslot; + + slots = kvm_memslots(kvm); + + /* we only care about the pages that the guest sees */ + kvm_for_each_memslot(memslot, slots) { + unsigned long hva_start, hva_end; + gfn_t gfn, gfn_end; + + hva_start = max(start, memslot->userspace_addr); + hva_end = min(end, memslot->userspace_addr + + (memslot->npages << PAGE_SHIFT)); + if (hva_start >= hva_end) + continue; + + /* + * {gfn(page) | page intersects with [hva_start, hva_end)} = + * {gfn_start, gfn_start+1, ..., gfn_end-1}. + */ + gfn = hva_to_gfn_memslot(hva_start, memslot); + gfn_end = hva_to_gfn_memslot(hva_end + PAGE_SIZE - 1, memslot); + + for (; gfn < gfn_end; ++gfn) { + gpa_t gpa = gfn << PAGE_SHIFT; + handler(kvm, gpa, data); + } + } +} + +static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) +{ + unmap_stage2_range(kvm, gpa, PAGE_SIZE); + kvm_tlb_flush_vmid(kvm); +} + +int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) +{ + unsigned long end = hva + PAGE_SIZE; + + if (!kvm->arch.pgd) + return 0; + + trace_kvm_unmap_hva(hva); + handle_hva_to_gpa(kvm, hva, end, &kvm_unmap_hva_handler, NULL); + return 0; +} + +int kvm_unmap_hva_range(struct kvm *kvm, + unsigned long start, unsigned long end) +{ + if (!kvm->arch.pgd) + return 0; + + trace_kvm_unmap_hva_range(start, end); + handle_hva_to_gpa(kvm, start, end, &kvm_unmap_hva_handler, NULL); + return 0; +} + +static void kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data) +{ + pte_t *pte = (pte_t *)data; + + stage2_set_pte(kvm, NULL, gpa, pte, false); +} + + +void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte) +{ + unsigned long end = hva + PAGE_SIZE; + pte_t stage2_pte; + + if (!kvm->arch.pgd) + return; + + trace_kvm_set_spte_hva(hva); + stage2_pte = pfn_pte(pte_pfn(pte), PAGE_S2); + handle_hva_to_gpa(kvm, hva, end, &kvm_set_spte_handler, &stage2_pte); +} + +void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu) +{ + mmu_free_memory_cache(&vcpu->arch.mmu_page_cache); +} + +phys_addr_t kvm_mmu_get_httbr(void) +{ + VM_BUG_ON(!virt_addr_valid(hyp_pgd)); + return virt_to_phys(hyp_pgd); +} + +int kvm_mmu_init(void) +{ + if (!hyp_pgd) { + kvm_err("Hyp mode PGD not allocated\n"); + return -ENOMEM; + } + + return 0; +} + +/** + * kvm_clear_idmap - remove all idmaps from the hyp pgd + * + * Free the underlying pmds for all pgds in range and clear the pgds (but + * don't free them) afterwards. + */ +void kvm_clear_hyp_idmap(void) +{ + unsigned long addr, end; + unsigned long next; + pgd_t *pgd = hyp_pgd; + pud_t *pud; + pmd_t *pmd; + + addr = virt_to_phys(__hyp_idmap_text_start); + end = virt_to_phys(__hyp_idmap_text_end); + + pgd += pgd_index(addr); + do { + next = pgd_addr_end(addr, end); + if (pgd_none_or_clear_bad(pgd)) + continue; + pud = pud_offset(pgd, addr); + pmd = pmd_offset(pud, addr); + + pud_clear(pud); + clean_pmd_entry(pmd); + pmd_free(NULL, (pmd_t *)((unsigned long)pmd & PAGE_MASK)); + } while (pgd++, addr = next, addr < end); +} diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c new file mode 100644 index 0000000..7ee5bb7 --- /dev/null +++ b/arch/arm/kvm/psci.c @@ -0,0 +1,108 @@ +/* + * Copyright (C) 2012 - ARM Ltd + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kvm_host.h> +#include <linux/wait.h> + +#include <asm/kvm_emulate.h> +#include <asm/kvm_psci.h> + +/* + * This is an implementation of the Power State Coordination Interface + * as described in ARM document number ARM DEN 0022A. + */ + +static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu) +{ + vcpu->arch.pause = true; +} + +static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) +{ + struct kvm *kvm = source_vcpu->kvm; + struct kvm_vcpu *vcpu; + wait_queue_head_t *wq; + unsigned long cpu_id; + phys_addr_t target_pc; + + cpu_id = *vcpu_reg(source_vcpu, 1); + if (vcpu_mode_is_32bit(source_vcpu)) + cpu_id &= ~((u32) 0); + + if (cpu_id >= atomic_read(&kvm->online_vcpus)) + return KVM_PSCI_RET_INVAL; + + target_pc = *vcpu_reg(source_vcpu, 2); + + vcpu = kvm_get_vcpu(kvm, cpu_id); + + wq = kvm_arch_vcpu_wq(vcpu); + if (!waitqueue_active(wq)) + return KVM_PSCI_RET_INVAL; + + kvm_reset_vcpu(vcpu); + + /* Gracefully handle Thumb2 entry point */ + if (vcpu_mode_is_32bit(vcpu) && (target_pc & 1)) { + target_pc &= ~((phys_addr_t) 1); + vcpu_set_thumb(vcpu); + } + + *vcpu_pc(vcpu) = target_pc; + vcpu->arch.pause = false; + smp_mb(); /* Make sure the above is visible */ + + wake_up_interruptible(wq); + + return KVM_PSCI_RET_SUCCESS; +} + +/** + * kvm_psci_call - handle PSCI call if r0 value is in range + * @vcpu: Pointer to the VCPU struct + * + * Handle PSCI calls from guests through traps from HVC or SMC instructions. + * The calling convention is similar to SMC calls to the secure world where + * the function number is placed in r0 and this function returns true if the + * function number specified in r0 is withing the PSCI range, and false + * otherwise. + */ +bool kvm_psci_call(struct kvm_vcpu *vcpu) +{ + unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0); + unsigned long val; + + switch (psci_fn) { + case KVM_PSCI_FN_CPU_OFF: + kvm_psci_vcpu_off(vcpu); + val = KVM_PSCI_RET_SUCCESS; + break; + case KVM_PSCI_FN_CPU_ON: + val = kvm_psci_vcpu_on(vcpu); + break; + case KVM_PSCI_FN_CPU_SUSPEND: + case KVM_PSCI_FN_MIGRATE: + val = KVM_PSCI_RET_NI; + break; + + default: + return false; + } + + *vcpu_reg(vcpu, 0) = val; + return true; +} diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c new file mode 100644 index 0000000..b80256b --- /dev/null +++ b/arch/arm/kvm/reset.c @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall <c.dall@virtualopensystems.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ +#include <linux/compiler.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kvm_host.h> +#include <linux/kvm.h> + +#include <asm/unified.h> +#include <asm/ptrace.h> +#include <asm/cputype.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_coproc.h> + +/****************************************************************************** + * Cortex-A15 Reset Values + */ + +static const int a15_max_cpu_idx = 3; + +static struct kvm_regs a15_regs_reset = { + .usr_regs.ARM_cpsr = SVC_MODE | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT, +}; + + +/******************************************************************************* + * Exported reset function + */ + +/** + * kvm_reset_vcpu - sets core registers and cp15 registers to reset value + * @vcpu: The VCPU pointer + * + * This function finds the right table above and sets the registers on the + * virtual CPU struct to their architectually defined reset values. + */ +int kvm_reset_vcpu(struct kvm_vcpu *vcpu) +{ + struct kvm_regs *cpu_reset; + + switch (vcpu->arch.target) { + case KVM_ARM_TARGET_CORTEX_A15: + if (vcpu->vcpu_id > a15_max_cpu_idx) + return -EINVAL; + cpu_reset = &a15_regs_reset; + vcpu->arch.midr = read_cpuid_id(); + break; + default: + return -ENODEV; + } + + /* Reset core registers */ + memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs)); + + /* Reset CP15 registers */ + kvm_reset_coprocs(vcpu); + + return 0; +} diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h new file mode 100644 index 0000000..a8e73ed --- /dev/null +++ b/arch/arm/kvm/trace.h @@ -0,0 +1,235 @@ +#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_KVM_H + +#include <linux/tracepoint.h> + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM kvm + +/* + * Tracepoints for entry/exit to guest + */ +TRACE_EVENT(kvm_entry, + TP_PROTO(unsigned long vcpu_pc), + TP_ARGS(vcpu_pc), + + TP_STRUCT__entry( + __field( unsigned long, vcpu_pc ) + ), + + TP_fast_assign( + __entry->vcpu_pc = vcpu_pc; + ), + + TP_printk("PC: 0x%08lx", __entry->vcpu_pc) +); + +TRACE_EVENT(kvm_exit, + TP_PROTO(unsigned long vcpu_pc), + TP_ARGS(vcpu_pc), + + TP_STRUCT__entry( + __field( unsigned long, vcpu_pc ) + ), + + TP_fast_assign( + __entry->vcpu_pc = vcpu_pc; + ), + + TP_printk("PC: 0x%08lx", __entry->vcpu_pc) +); + +TRACE_EVENT(kvm_guest_fault, + TP_PROTO(unsigned long vcpu_pc, unsigned long hsr, + unsigned long hxfar, + unsigned long long ipa), + TP_ARGS(vcpu_pc, hsr, hxfar, ipa), + + TP_STRUCT__entry( + __field( unsigned long, vcpu_pc ) + __field( unsigned long, hsr ) + __field( unsigned long, hxfar ) + __field( unsigned long long, ipa ) + ), + + TP_fast_assign( + __entry->vcpu_pc = vcpu_pc; + __entry->hsr = hsr; + __entry->hxfar = hxfar; + __entry->ipa = ipa; + ), + + TP_printk("guest fault at PC %#08lx (hxfar %#08lx, " + "ipa %#16llx, hsr %#08lx", + __entry->vcpu_pc, __entry->hxfar, + __entry->ipa, __entry->hsr) +); + +TRACE_EVENT(kvm_irq_line, + TP_PROTO(unsigned int type, int vcpu_idx, int irq_num, int level), + TP_ARGS(type, vcpu_idx, irq_num, level), + + TP_STRUCT__entry( + __field( unsigned int, type ) + __field( int, vcpu_idx ) + __field( int, irq_num ) + __field( int, level ) + ), + + TP_fast_assign( + __entry->type = type; + __entry->vcpu_idx = vcpu_idx; + __entry->irq_num = irq_num; + __entry->level = level; + ), + + TP_printk("Inject %s interrupt (%d), vcpu->idx: %d, num: %d, level: %d", + (__entry->type == KVM_ARM_IRQ_TYPE_CPU) ? "CPU" : + (__entry->type == KVM_ARM_IRQ_TYPE_PPI) ? "VGIC PPI" : + (__entry->type == KVM_ARM_IRQ_TYPE_SPI) ? "VGIC SPI" : "UNKNOWN", + __entry->type, __entry->vcpu_idx, __entry->irq_num, __entry->level) +); + +TRACE_EVENT(kvm_mmio_emulate, + TP_PROTO(unsigned long vcpu_pc, unsigned long instr, + unsigned long cpsr), + TP_ARGS(vcpu_pc, instr, cpsr), + + TP_STRUCT__entry( + __field( unsigned long, vcpu_pc ) + __field( unsigned long, instr ) + __field( unsigned long, cpsr ) + ), + + TP_fast_assign( + __entry->vcpu_pc = vcpu_pc; + __entry->instr = instr; + __entry->cpsr = cpsr; + ), + + TP_printk("Emulate MMIO at: 0x%08lx (instr: %08lx, cpsr: %08lx)", + __entry->vcpu_pc, __entry->instr, __entry->cpsr) +); + +/* Architecturally implementation defined CP15 register access */ +TRACE_EVENT(kvm_emulate_cp15_imp, + TP_PROTO(unsigned long Op1, unsigned long Rt1, unsigned long CRn, + unsigned long CRm, unsigned long Op2, bool is_write), + TP_ARGS(Op1, Rt1, CRn, CRm, Op2, is_write), + + TP_STRUCT__entry( + __field( unsigned int, Op1 ) + __field( unsigned int, Rt1 ) + __field( unsigned int, CRn ) + __field( unsigned int, CRm ) + __field( unsigned int, Op2 ) + __field( bool, is_write ) + ), + + TP_fast_assign( + __entry->is_write = is_write; + __entry->Op1 = Op1; + __entry->Rt1 = Rt1; + __entry->CRn = CRn; + __entry->CRm = CRm; + __entry->Op2 = Op2; + ), + + TP_printk("Implementation defined CP15: %s\tp15, %u, r%u, c%u, c%u, %u", + (__entry->is_write) ? "mcr" : "mrc", + __entry->Op1, __entry->Rt1, __entry->CRn, + __entry->CRm, __entry->Op2) +); + +TRACE_EVENT(kvm_wfi, + TP_PROTO(unsigned long vcpu_pc), + TP_ARGS(vcpu_pc), + + TP_STRUCT__entry( + __field( unsigned long, vcpu_pc ) + ), + + TP_fast_assign( + __entry->vcpu_pc = vcpu_pc; + ), + + TP_printk("guest executed wfi at: 0x%08lx", __entry->vcpu_pc) +); + +TRACE_EVENT(kvm_unmap_hva, + TP_PROTO(unsigned long hva), + TP_ARGS(hva), + + TP_STRUCT__entry( + __field( unsigned long, hva ) + ), + + TP_fast_assign( + __entry->hva = hva; + ), + + TP_printk("mmu notifier unmap hva: %#08lx", __entry->hva) +); + +TRACE_EVENT(kvm_unmap_hva_range, + TP_PROTO(unsigned long start, unsigned long end), + TP_ARGS(start, end), + + TP_STRUCT__entry( + __field( unsigned long, start ) + __field( unsigned long, end ) + ), + + TP_fast_assign( + __entry->start = start; + __entry->end = end; + ), + + TP_printk("mmu notifier unmap range: %#08lx -- %#08lx", + __entry->start, __entry->end) +); + +TRACE_EVENT(kvm_set_spte_hva, + TP_PROTO(unsigned long hva), + TP_ARGS(hva), + + TP_STRUCT__entry( + __field( unsigned long, hva ) + ), + + TP_fast_assign( + __entry->hva = hva; + ), + + TP_printk("mmu notifier set pte hva: %#08lx", __entry->hva) +); + +TRACE_EVENT(kvm_hvc, + TP_PROTO(unsigned long vcpu_pc, unsigned long r0, unsigned long imm), + TP_ARGS(vcpu_pc, r0, imm), + + TP_STRUCT__entry( + __field( unsigned long, vcpu_pc ) + __field( unsigned long, r0 ) + __field( unsigned long, imm ) + ), + + TP_fast_assign( + __entry->vcpu_pc = vcpu_pc; + __entry->r0 = r0; + __entry->imm = imm; + ), + + TP_printk("HVC at 0x%08lx (r0: 0x%08lx, imm: 0x%lx", + __entry->vcpu_pc, __entry->r0, __entry->imm) +); + +#endif /* _TRACE_KVM_H */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH arch/arm/kvm +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +/* This part must be outside protection */ +#include <trace/define_trace.h> diff --git a/arch/arm/kvm/vgic.c b/arch/arm/kvm/vgic.c new file mode 100644 index 0000000..c9a1731 --- /dev/null +++ b/arch/arm/kvm/vgic.c @@ -0,0 +1,1506 @@ +/* + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/cpu.h> +#include <linux/kvm.h> +#include <linux/kvm_host.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#include <linux/irqchip/arm-gic.h> + +#include <asm/kvm_emulate.h> +#include <asm/kvm_arm.h> +#include <asm/kvm_mmu.h> + +/* + * How the whole thing works (courtesy of Christoffer Dall): + * + * - At any time, the dist->irq_pending_on_cpu is the oracle that knows if + * something is pending + * - VGIC pending interrupts are stored on the vgic.irq_state vgic + * bitmap (this bitmap is updated by both user land ioctls and guest + * mmio ops, and other in-kernel peripherals such as the + * arch. timers) and indicate the 'wire' state. + * - Every time the bitmap changes, the irq_pending_on_cpu oracle is + * recalculated + * - To calculate the oracle, we need info for each cpu from + * compute_pending_for_cpu, which considers: + * - PPI: dist->irq_state & dist->irq_enable + * - SPI: dist->irq_state & dist->irq_enable & dist->irq_spi_target + * - irq_spi_target is a 'formatted' version of the GICD_ICFGR + * registers, stored on each vcpu. We only keep one bit of + * information per interrupt, making sure that only one vcpu can + * accept the interrupt. + * - The same is true when injecting an interrupt, except that we only + * consider a single interrupt at a time. The irq_spi_cpu array + * contains the target CPU for each SPI. + * + * The handling of level interrupts adds some extra complexity. We + * need to track when the interrupt has been EOIed, so we can sample + * the 'line' again. This is achieved as such: + * + * - When a level interrupt is moved onto a vcpu, the corresponding + * bit in irq_active is set. As long as this bit is set, the line + * will be ignored for further interrupts. The interrupt is injected + * into the vcpu with the GICH_LR_EOI bit set (generate a + * maintenance interrupt on EOI). + * - When the interrupt is EOIed, the maintenance interrupt fires, + * and clears the corresponding bit in irq_active. This allow the + * interrupt line to be sampled again. + */ + +#define VGIC_ADDR_UNDEF (-1) +#define IS_VGIC_ADDR_UNDEF(_x) ((_x) == VGIC_ADDR_UNDEF) + +/* Physical address of vgic virtual cpu interface */ +static phys_addr_t vgic_vcpu_base; + +/* Virtual control interface base address */ +static void __iomem *vgic_vctrl_base; + +static struct device_node *vgic_node; + +#define ACCESS_READ_VALUE (1 << 0) +#define ACCESS_READ_RAZ (0 << 0) +#define ACCESS_READ_MASK(x) ((x) & (1 << 0)) +#define ACCESS_WRITE_IGNORED (0 << 1) +#define ACCESS_WRITE_SETBIT (1 << 1) +#define ACCESS_WRITE_CLEARBIT (2 << 1) +#define ACCESS_WRITE_VALUE (3 << 1) +#define ACCESS_WRITE_MASK(x) ((x) & (3 << 1)) + +static void vgic_retire_disabled_irqs(struct kvm_vcpu *vcpu); +static void vgic_update_state(struct kvm *kvm); +static void vgic_kick_vcpus(struct kvm *kvm); +static void vgic_dispatch_sgi(struct kvm_vcpu *vcpu, u32 reg); +static u32 vgic_nr_lr; + +static unsigned int vgic_maint_irq; + +static u32 *vgic_bitmap_get_reg(struct vgic_bitmap *x, + int cpuid, u32 offset) +{ + offset >>= 2; + if (!offset) + return x->percpu[cpuid].reg; + else + return x->shared.reg + offset - 1; +} + +static int vgic_bitmap_get_irq_val(struct vgic_bitmap *x, + int cpuid, int irq) +{ + if (irq < VGIC_NR_PRIVATE_IRQS) + return test_bit(irq, x->percpu[cpuid].reg_ul); + + return test_bit(irq - VGIC_NR_PRIVATE_IRQS, x->shared.reg_ul); +} + +static void vgic_bitmap_set_irq_val(struct vgic_bitmap *x, int cpuid, + int irq, int val) +{ + unsigned long *reg; + + if (irq < VGIC_NR_PRIVATE_IRQS) { + reg = x->percpu[cpuid].reg_ul; + } else { + reg = x->shared.reg_ul; + irq -= VGIC_NR_PRIVATE_IRQS; + } + + if (val) + set_bit(irq, reg); + else + clear_bit(irq, reg); +} + +static unsigned long *vgic_bitmap_get_cpu_map(struct vgic_bitmap *x, int cpuid) +{ + if (unlikely(cpuid >= VGIC_MAX_CPUS)) + return NULL; + return x->percpu[cpuid].reg_ul; +} + +static unsigned long *vgic_bitmap_get_shared_map(struct vgic_bitmap *x) +{ + return x->shared.reg_ul; +} + +static u32 *vgic_bytemap_get_reg(struct vgic_bytemap *x, int cpuid, u32 offset) +{ + offset >>= 2; + BUG_ON(offset > (VGIC_NR_IRQS / 4)); + if (offset < 4) + return x->percpu[cpuid] + offset; + else + return x->shared + offset - 8; +} + +#define VGIC_CFG_LEVEL 0 +#define VGIC_CFG_EDGE 1 + +static bool vgic_irq_is_edge(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + int irq_val; + + irq_val = vgic_bitmap_get_irq_val(&dist->irq_cfg, vcpu->vcpu_id, irq); + return irq_val == VGIC_CFG_EDGE; +} + +static int vgic_irq_is_enabled(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + return vgic_bitmap_get_irq_val(&dist->irq_enabled, vcpu->vcpu_id, irq); +} + +static int vgic_irq_is_active(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + return vgic_bitmap_get_irq_val(&dist->irq_active, vcpu->vcpu_id, irq); +} + +static void vgic_irq_set_active(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + vgic_bitmap_set_irq_val(&dist->irq_active, vcpu->vcpu_id, irq, 1); +} + +static void vgic_irq_clear_active(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + vgic_bitmap_set_irq_val(&dist->irq_active, vcpu->vcpu_id, irq, 0); +} + +static int vgic_dist_irq_is_pending(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + return vgic_bitmap_get_irq_val(&dist->irq_state, vcpu->vcpu_id, irq); +} + +static void vgic_dist_irq_set(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + vgic_bitmap_set_irq_val(&dist->irq_state, vcpu->vcpu_id, irq, 1); +} + +static void vgic_dist_irq_clear(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + vgic_bitmap_set_irq_val(&dist->irq_state, vcpu->vcpu_id, irq, 0); +} + +static void vgic_cpu_irq_set(struct kvm_vcpu *vcpu, int irq) +{ + if (irq < VGIC_NR_PRIVATE_IRQS) + set_bit(irq, vcpu->arch.vgic_cpu.pending_percpu); + else + set_bit(irq - VGIC_NR_PRIVATE_IRQS, + vcpu->arch.vgic_cpu.pending_shared); +} + +static void vgic_cpu_irq_clear(struct kvm_vcpu *vcpu, int irq) +{ + if (irq < VGIC_NR_PRIVATE_IRQS) + clear_bit(irq, vcpu->arch.vgic_cpu.pending_percpu); + else + clear_bit(irq - VGIC_NR_PRIVATE_IRQS, + vcpu->arch.vgic_cpu.pending_shared); +} + +static u32 mmio_data_read(struct kvm_exit_mmio *mmio, u32 mask) +{ + return *((u32 *)mmio->data) & mask; +} + +static void mmio_data_write(struct kvm_exit_mmio *mmio, u32 mask, u32 value) +{ + *((u32 *)mmio->data) = value & mask; +} + +/** + * vgic_reg_access - access vgic register + * @mmio: pointer to the data describing the mmio access + * @reg: pointer to the virtual backing of vgic distributor data + * @offset: least significant 2 bits used for word offset + * @mode: ACCESS_ mode (see defines above) + * + * Helper to make vgic register access easier using one of the access + * modes defined for vgic register access + * (read,raz,write-ignored,setbit,clearbit,write) + */ +static void vgic_reg_access(struct kvm_exit_mmio *mmio, u32 *reg, + phys_addr_t offset, int mode) +{ + int word_offset = (offset & 3) * 8; + u32 mask = (1UL << (mmio->len * 8)) - 1; + u32 regval; + + /* + * Any alignment fault should have been delivered to the guest + * directly (ARM ARM B3.12.7 "Prioritization of aborts"). + */ + + if (reg) { + regval = *reg; + } else { + BUG_ON(mode != (ACCESS_READ_RAZ | ACCESS_WRITE_IGNORED)); + regval = 0; + } + + if (mmio->is_write) { + u32 data = mmio_data_read(mmio, mask) << word_offset; + switch (ACCESS_WRITE_MASK(mode)) { + case ACCESS_WRITE_IGNORED: + return; + + case ACCESS_WRITE_SETBIT: + regval |= data; + break; + + case ACCESS_WRITE_CLEARBIT: + regval &= ~data; + break; + + case ACCESS_WRITE_VALUE: + regval = (regval & ~(mask << word_offset)) | data; + break; + } + *reg = regval; + } else { + switch (ACCESS_READ_MASK(mode)) { + case ACCESS_READ_RAZ: + regval = 0; + /* fall through */ + + case ACCESS_READ_VALUE: + mmio_data_write(mmio, mask, regval >> word_offset); + } + } +} + +static bool handle_mmio_misc(struct kvm_vcpu *vcpu, + struct kvm_exit_mmio *mmio, phys_addr_t offset) +{ + u32 reg; + u32 word_offset = offset & 3; + + switch (offset & ~3) { + case 0: /* CTLR */ + reg = vcpu->kvm->arch.vgic.enabled; + vgic_reg_access(mmio, ®, word_offset, + ACCESS_READ_VALUE | ACCESS_WRITE_VALUE); + if (mmio->is_write) { + vcpu->kvm->arch.vgic.enabled = reg & 1; + vgic_update_state(vcpu->kvm); + return true; + } + break; + + case 4: /* TYPER */ + reg = (atomic_read(&vcpu->kvm->online_vcpus) - 1) << 5; + reg |= (VGIC_NR_IRQS >> 5) - 1; + vgic_reg_access(mmio, ®, word_offset, + ACCESS_READ_VALUE | ACCESS_WRITE_IGNORED); + break; + + case 8: /* IIDR */ + reg = 0x4B00043B; + vgic_reg_access(mmio, ®, word_offset, + ACCESS_READ_VALUE | ACCESS_WRITE_IGNORED); + break; + } + + return false; +} + +static bool handle_mmio_raz_wi(struct kvm_vcpu *vcpu, + struct kvm_exit_mmio *mmio, phys_addr_t offset) +{ + vgic_reg_access(mmio, NULL, offset, + ACCESS_READ_RAZ | ACCESS_WRITE_IGNORED); + return false; +} + +static bool handle_mmio_set_enable_reg(struct kvm_vcpu *vcpu, + struct kvm_exit_mmio *mmio, + phys_addr_t offset) +{ + u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_enabled, + vcpu->vcpu_id, offset); + vgic_reg_access(mmio, reg, offset, + ACCESS_READ_VALUE | ACCESS_WRITE_SETBIT); + if (mmio->is_write) { + vgic_update_state(vcpu->kvm); + return true; + } + + return false; +} + +static bool handle_mmio_clear_enable_reg(struct kvm_vcpu *vcpu, + struct kvm_exit_mmio *mmio, + phys_addr_t offset) +{ + u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_enabled, + vcpu->vcpu_id, offset); + vgic_reg_access(mmio, reg, offset, + ACCESS_READ_VALUE | ACCESS_WRITE_CLEARBIT); + if (mmio->is_write) { + if (offset < 4) /* Force SGI enabled */ + *reg |= 0xffff; + vgic_retire_disabled_irqs(vcpu); + vgic_update_state(vcpu->kvm); + return true; + } + + return false; +} + +static bool handle_mmio_set_pending_reg(struct kvm_vcpu *vcpu, + struct kvm_exit_mmio *mmio, + phys_addr_t offset) +{ + u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_state, + vcpu->vcpu_id, offset); + vgic_reg_access(mmio, reg, offset, + ACCESS_READ_VALUE | ACCESS_WRITE_SETBIT); + if (mmio->is_write) { + vgic_update_state(vcpu->kvm); + return true; + } + + return false; +} + +static bool handle_mmio_clear_pending_reg(struct kvm_vcpu *vcpu, + struct kvm_exit_mmio *mmio, + phys_addr_t offset) +{ + u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_state, + vcpu->vcpu_id, offset); + vgic_reg_access(mmio, reg, offset, + ACCESS_READ_VALUE | ACCESS_WRITE_CLEARBIT); + if (mmio->is_write) { + vgic_update_state(vcpu->kvm); + return true; + } + + return false; +} + +static bool handle_mmio_priority_reg(struct kvm_vcpu *vcpu, + struct kvm_exit_mmio *mmio, + phys_addr_t offset) +{ + u32 *reg = vgic_bytemap_get_reg(&vcpu->kvm->arch.vgic.irq_priority, + vcpu->vcpu_id, offset); + vgic_reg_access(mmio, reg, offset, + ACCESS_READ_VALUE | ACCESS_WRITE_VALUE); + return false; +} + +#define GICD_ITARGETSR_SIZE 32 +#define GICD_CPUTARGETS_BITS 8 +#define GICD_IRQS_PER_ITARGETSR (GICD_ITARGETSR_SIZE / GICD_CPUTARGETS_BITS) +static u32 vgic_get_target_reg(struct kvm *kvm, int irq) +{ + struct vgic_dist *dist = &kvm->arch.vgic; + struct kvm_vcpu *vcpu; + int i, c; + unsigned long *bmap; + u32 val = 0; + + irq -= VGIC_NR_PRIVATE_IRQS; + + kvm_for_each_vcpu(c, vcpu, kvm) { + bmap = vgic_bitmap_get_shared_map(&dist->irq_spi_target[c]); + for (i = 0; i < GICD_IRQS_PER_ITARGETSR; i++) + if (test_bit(irq + i, bmap)) + val |= 1 << (c + i * 8); + } + + return val; +} + +static void vgic_set_target_reg(struct kvm *kvm, u32 val, int irq) +{ + struct vgic_dist *dist = &kvm->arch.vgic; + struct kvm_vcpu *vcpu; + int i, c; + unsigned long *bmap; + u32 target; + + irq -= VGIC_NR_PRIVATE_IRQS; + + /* + * Pick the LSB in each byte. This ensures we target exactly + * one vcpu per IRQ. If the byte is null, assume we target + * CPU0. + */ + for (i = 0; i < GICD_IRQS_PER_ITARGETSR; i++) { + int shift = i * GICD_CPUTARGETS_BITS; + target = ffs((val >> shift) & 0xffU); + target = target ? (target - 1) : 0; + dist->irq_spi_cpu[irq + i] = target; + kvm_for_each_vcpu(c, vcpu, kvm) { + bmap = vgic_bitmap_get_shared_map(&dist->irq_spi_target[c]); + if (c == target) + set_bit(irq + i, bmap); + else + clear_bit(irq + i, bmap); + } + } +} + +static bool handle_mmio_target_reg(struct kvm_vcpu *vcpu, + struct kvm_exit_mmio *mmio, + phys_addr_t offset) +{ + u32 reg; + + /* We treat the banked interrupts targets as read-only */ + if (offset < 32) { + u32 roreg = 1 << vcpu->vcpu_id; + roreg |= roreg << 8; + roreg |= roreg << 16; + + vgic_reg_access(mmio, &roreg, offset, + ACCESS_READ_VALUE | ACCESS_WRITE_IGNORED); + return false; + } + + reg = vgic_get_target_reg(vcpu->kvm, offset & ~3U); + vgic_reg_access(mmio, ®, offset, + ACCESS_READ_VALUE | ACCESS_WRITE_VALUE); + if (mmio->is_write) { + vgic_set_target_reg(vcpu->kvm, reg, offset & ~3U); + vgic_update_state(vcpu->kvm); + return true; + } + + return false; +} + +static u32 vgic_cfg_expand(u16 val) +{ + u32 res = 0; + int i; + + /* + * Turn a 16bit value like abcd...mnop into a 32bit word + * a0b0c0d0...m0n0o0p0, which is what the HW cfg register is. + */ + for (i = 0; i < 16; i++) + res |= ((val >> i) & VGIC_CFG_EDGE) << (2 * i + 1); + + return res; +} + +static u16 vgic_cfg_compress(u32 val) +{ + u16 res = 0; + int i; + + /* + * Turn a 32bit word a0b0c0d0...m0n0o0p0 into 16bit value like + * abcd...mnop which is what we really care about. + */ + for (i = 0; i < 16; i++) + res |= ((val >> (i * 2 + 1)) & VGIC_CFG_EDGE) << i; + + return res; +} + +/* + * The distributor uses 2 bits per IRQ for the CFG register, but the + * LSB is always 0. As such, we only keep the upper bit, and use the + * two above functions to compress/expand the bits + */ +static bool handle_mmio_cfg_reg(struct kvm_vcpu *vcpu, + struct kvm_exit_mmio *mmio, phys_addr_t offset) +{ + u32 val; + u32 *reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_cfg, + vcpu->vcpu_id, offset >> 1); + if (offset & 2) + val = *reg >> 16; + else + val = *reg & 0xffff; + + val = vgic_cfg_expand(val); + vgic_reg_access(mmio, &val, offset, + ACCESS_READ_VALUE | ACCESS_WRITE_VALUE); + if (mmio->is_write) { + if (offset < 4) { + *reg = ~0U; /* Force PPIs/SGIs to 1 */ + return false; + } + + val = vgic_cfg_compress(val); + if (offset & 2) { + *reg &= 0xffff; + *reg |= val << 16; + } else { + *reg &= 0xffff << 16; + *reg |= val; + } + } + + return false; +} + +static bool handle_mmio_sgi_reg(struct kvm_vcpu *vcpu, + struct kvm_exit_mmio *mmio, phys_addr_t offset) +{ + u32 reg; + vgic_reg_access(mmio, ®, offset, + ACCESS_READ_RAZ | ACCESS_WRITE_VALUE); + if (mmio->is_write) { + vgic_dispatch_sgi(vcpu, reg); + vgic_update_state(vcpu->kvm); + return true; + } + + return false; +} + +/* + * I would have liked to use the kvm_bus_io_*() API instead, but it + * cannot cope with banked registers (only the VM pointer is passed + * around, and we need the vcpu). One of these days, someone please + * fix it! + */ +struct mmio_range { + phys_addr_t base; + unsigned long len; + bool (*handle_mmio)(struct kvm_vcpu *vcpu, struct kvm_exit_mmio *mmio, + phys_addr_t offset); +}; + +static const struct mmio_range vgic_ranges[] = { + { + .base = GIC_DIST_CTRL, + .len = 12, + .handle_mmio = handle_mmio_misc, + }, + { + .base = GIC_DIST_IGROUP, + .len = VGIC_NR_IRQS / 8, + .handle_mmio = handle_mmio_raz_wi, + }, + { + .base = GIC_DIST_ENABLE_SET, + .len = VGIC_NR_IRQS / 8, + .handle_mmio = handle_mmio_set_enable_reg, + }, + { + .base = GIC_DIST_ENABLE_CLEAR, + .len = VGIC_NR_IRQS / 8, + .handle_mmio = handle_mmio_clear_enable_reg, + }, + { + .base = GIC_DIST_PENDING_SET, + .len = VGIC_NR_IRQS / 8, + .handle_mmio = handle_mmio_set_pending_reg, + }, + { + .base = GIC_DIST_PENDING_CLEAR, + .len = VGIC_NR_IRQS / 8, + .handle_mmio = handle_mmio_clear_pending_reg, + }, + { + .base = GIC_DIST_ACTIVE_SET, + .len = VGIC_NR_IRQS / 8, + .handle_mmio = handle_mmio_raz_wi, + }, + { + .base = GIC_DIST_ACTIVE_CLEAR, + .len = VGIC_NR_IRQS / 8, + .handle_mmio = handle_mmio_raz_wi, + }, + { + .base = GIC_DIST_PRI, + .len = VGIC_NR_IRQS, + .handle_mmio = handle_mmio_priority_reg, + }, + { + .base = GIC_DIST_TARGET, + .len = VGIC_NR_IRQS, + .handle_mmio = handle_mmio_target_reg, + }, + { + .base = GIC_DIST_CONFIG, + .len = VGIC_NR_IRQS / 4, + .handle_mmio = handle_mmio_cfg_reg, + }, + { + .base = GIC_DIST_SOFTINT, + .len = 4, + .handle_mmio = handle_mmio_sgi_reg, + }, + {} +}; + +static const +struct mmio_range *find_matching_range(const struct mmio_range *ranges, + struct kvm_exit_mmio *mmio, + phys_addr_t base) +{ + const struct mmio_range *r = ranges; + phys_addr_t addr = mmio->phys_addr - base; + + while (r->len) { + if (addr >= r->base && + (addr + mmio->len) <= (r->base + r->len)) + return r; + r++; + } + + return NULL; +} + +/** + * vgic_handle_mmio - handle an in-kernel MMIO access + * @vcpu: pointer to the vcpu performing the access + * @run: pointer to the kvm_run structure + * @mmio: pointer to the data describing the access + * + * returns true if the MMIO access has been performed in kernel space, + * and false if it needs to be emulated in user space. + */ +bool vgic_handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *run, + struct kvm_exit_mmio *mmio) +{ + const struct mmio_range *range; + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + unsigned long base = dist->vgic_dist_base; + bool updated_state; + unsigned long offset; + + if (!irqchip_in_kernel(vcpu->kvm) || + mmio->phys_addr < base || + (mmio->phys_addr + mmio->len) > (base + KVM_VGIC_V2_DIST_SIZE)) + return false; + + /* We don't support ldrd / strd or ldm / stm to the emulated vgic */ + if (mmio->len > 4) { + kvm_inject_dabt(vcpu, mmio->phys_addr); + return true; + } + + range = find_matching_range(vgic_ranges, mmio, base); + if (unlikely(!range || !range->handle_mmio)) { + pr_warn("Unhandled access %d %08llx %d\n", + mmio->is_write, mmio->phys_addr, mmio->len); + return false; + } + + spin_lock(&vcpu->kvm->arch.vgic.lock); + offset = mmio->phys_addr - range->base - base; + updated_state = range->handle_mmio(vcpu, mmio, offset); + spin_unlock(&vcpu->kvm->arch.vgic.lock); + kvm_prepare_mmio(run, mmio); + kvm_handle_mmio_return(vcpu, run); + + if (updated_state) + vgic_kick_vcpus(vcpu->kvm); + + return true; +} + +static void vgic_dispatch_sgi(struct kvm_vcpu *vcpu, u32 reg) +{ + struct kvm *kvm = vcpu->kvm; + struct vgic_dist *dist = &kvm->arch.vgic; + int nrcpus = atomic_read(&kvm->online_vcpus); + u8 target_cpus; + int sgi, mode, c, vcpu_id; + + vcpu_id = vcpu->vcpu_id; + + sgi = reg & 0xf; + target_cpus = (reg >> 16) & 0xff; + mode = (reg >> 24) & 3; + + switch (mode) { + case 0: + if (!target_cpus) + return; + + case 1: + target_cpus = ((1 << nrcpus) - 1) & ~(1 << vcpu_id) & 0xff; + break; + + case 2: + target_cpus = 1 << vcpu_id; + break; + } + + kvm_for_each_vcpu(c, vcpu, kvm) { + if (target_cpus & 1) { + /* Flag the SGI as pending */ + vgic_dist_irq_set(vcpu, sgi); + dist->irq_sgi_sources[c][sgi] |= 1 << vcpu_id; + kvm_debug("SGI%d from CPU%d to CPU%d\n", sgi, vcpu_id, c); + } + + target_cpus >>= 1; + } +} + +static int compute_pending_for_cpu(struct kvm_vcpu *vcpu) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + unsigned long *pending, *enabled, *pend_percpu, *pend_shared; + unsigned long pending_private, pending_shared; + int vcpu_id; + + vcpu_id = vcpu->vcpu_id; + pend_percpu = vcpu->arch.vgic_cpu.pending_percpu; + pend_shared = vcpu->arch.vgic_cpu.pending_shared; + + pending = vgic_bitmap_get_cpu_map(&dist->irq_state, vcpu_id); + enabled = vgic_bitmap_get_cpu_map(&dist->irq_enabled, vcpu_id); + bitmap_and(pend_percpu, pending, enabled, VGIC_NR_PRIVATE_IRQS); + + pending = vgic_bitmap_get_shared_map(&dist->irq_state); + enabled = vgic_bitmap_get_shared_map(&dist->irq_enabled); + bitmap_and(pend_shared, pending, enabled, VGIC_NR_SHARED_IRQS); + bitmap_and(pend_shared, pend_shared, + vgic_bitmap_get_shared_map(&dist->irq_spi_target[vcpu_id]), + VGIC_NR_SHARED_IRQS); + + pending_private = find_first_bit(pend_percpu, VGIC_NR_PRIVATE_IRQS); + pending_shared = find_first_bit(pend_shared, VGIC_NR_SHARED_IRQS); + return (pending_private < VGIC_NR_PRIVATE_IRQS || + pending_shared < VGIC_NR_SHARED_IRQS); +} + +/* + * Update the interrupt state and determine which CPUs have pending + * interrupts. Must be called with distributor lock held. + */ +static void vgic_update_state(struct kvm *kvm) +{ + struct vgic_dist *dist = &kvm->arch.vgic; + struct kvm_vcpu *vcpu; + int c; + + if (!dist->enabled) { + set_bit(0, &dist->irq_pending_on_cpu); + return; + } + + kvm_for_each_vcpu(c, vcpu, kvm) { + if (compute_pending_for_cpu(vcpu)) { + pr_debug("CPU%d has pending interrupts\n", c); + set_bit(c, &dist->irq_pending_on_cpu); + } + } +} + +#define LR_CPUID(lr) \ + (((lr) & GICH_LR_PHYSID_CPUID) >> GICH_LR_PHYSID_CPUID_SHIFT) +#define MK_LR_PEND(src, irq) \ + (GICH_LR_PENDING_BIT | ((src) << GICH_LR_PHYSID_CPUID_SHIFT) | (irq)) + +/* + * An interrupt may have been disabled after being made pending on the + * CPU interface (the classic case is a timer running while we're + * rebooting the guest - the interrupt would kick as soon as the CPU + * interface gets enabled, with deadly consequences). + * + * The solution is to examine already active LRs, and check the + * interrupt is still enabled. If not, just retire it. + */ +static void vgic_retire_disabled_irqs(struct kvm_vcpu *vcpu) +{ + struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu; + int lr; + + for_each_set_bit(lr, vgic_cpu->lr_used, vgic_cpu->nr_lr) { + int irq = vgic_cpu->vgic_lr[lr] & GICH_LR_VIRTUALID; + + if (!vgic_irq_is_enabled(vcpu, irq)) { + vgic_cpu->vgic_irq_lr_map[irq] = LR_EMPTY; + clear_bit(lr, vgic_cpu->lr_used); + vgic_cpu->vgic_lr[lr] &= ~GICH_LR_STATE; + if (vgic_irq_is_active(vcpu, irq)) + vgic_irq_clear_active(vcpu, irq); + } + } +} + +/* + * Queue an interrupt to a CPU virtual interface. Return true on success, + * or false if it wasn't possible to queue it. + */ +static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) +{ + struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu; + int lr; + + /* Sanitize the input... */ + BUG_ON(sgi_source_id & ~7); + BUG_ON(sgi_source_id && irq >= VGIC_NR_SGIS); + BUG_ON(irq >= VGIC_NR_IRQS); + + kvm_debug("Queue IRQ%d\n", irq); + + lr = vgic_cpu->vgic_irq_lr_map[irq]; + + /* Do we have an active interrupt for the same CPUID? */ + if (lr != LR_EMPTY && + (LR_CPUID(vgic_cpu->vgic_lr[lr]) == sgi_source_id)) { + kvm_debug("LR%d piggyback for IRQ%d %x\n", + lr, irq, vgic_cpu->vgic_lr[lr]); + BUG_ON(!test_bit(lr, vgic_cpu->lr_used)); + vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT; + + goto out; + } + + /* Try to use another LR for this interrupt */ + lr = find_first_zero_bit((unsigned long *)vgic_cpu->lr_used, + vgic_cpu->nr_lr); + if (lr >= vgic_cpu->nr_lr) + return false; + + kvm_debug("LR%d allocated for IRQ%d %x\n", lr, irq, sgi_source_id); + vgic_cpu->vgic_lr[lr] = MK_LR_PEND(sgi_source_id, irq); + vgic_cpu->vgic_irq_lr_map[irq] = lr; + set_bit(lr, vgic_cpu->lr_used); + +out: + if (!vgic_irq_is_edge(vcpu, irq)) + vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI; + + return true; +} + +static bool vgic_queue_sgi(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + unsigned long sources; + int vcpu_id = vcpu->vcpu_id; + int c; + + sources = dist->irq_sgi_sources[vcpu_id][irq]; + + for_each_set_bit(c, &sources, VGIC_MAX_CPUS) { + if (vgic_queue_irq(vcpu, c, irq)) + clear_bit(c, &sources); + } + + dist->irq_sgi_sources[vcpu_id][irq] = sources; + + /* + * If the sources bitmap has been cleared it means that we + * could queue all the SGIs onto link registers (see the + * clear_bit above), and therefore we are done with them in + * our emulated gic and can get rid of them. + */ + if (!sources) { + vgic_dist_irq_clear(vcpu, irq); + vgic_cpu_irq_clear(vcpu, irq); + return true; + } + + return false; +} + +static bool vgic_queue_hwirq(struct kvm_vcpu *vcpu, int irq) +{ + if (vgic_irq_is_active(vcpu, irq)) + return true; /* level interrupt, already queued */ + + if (vgic_queue_irq(vcpu, 0, irq)) { + if (vgic_irq_is_edge(vcpu, irq)) { + vgic_dist_irq_clear(vcpu, irq); + vgic_cpu_irq_clear(vcpu, irq); + } else { + vgic_irq_set_active(vcpu, irq); + } + + return true; + } + + return false; +} + +/* + * Fill the list registers with pending interrupts before running the + * guest. + */ +static void __kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu) +{ + struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu; + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + int i, vcpu_id; + int overflow = 0; + + vcpu_id = vcpu->vcpu_id; + + /* + * We may not have any pending interrupt, or the interrupts + * may have been serviced from another vcpu. In all cases, + * move along. + */ + if (!kvm_vgic_vcpu_pending_irq(vcpu)) { + pr_debug("CPU%d has no pending interrupt\n", vcpu_id); + goto epilog; + } + + /* SGIs */ + for_each_set_bit(i, vgic_cpu->pending_percpu, VGIC_NR_SGIS) { + if (!vgic_queue_sgi(vcpu, i)) + overflow = 1; + } + + /* PPIs */ + for_each_set_bit_from(i, vgic_cpu->pending_percpu, VGIC_NR_PRIVATE_IRQS) { + if (!vgic_queue_hwirq(vcpu, i)) + overflow = 1; + } + + /* SPIs */ + for_each_set_bit(i, vgic_cpu->pending_shared, VGIC_NR_SHARED_IRQS) { + if (!vgic_queue_hwirq(vcpu, i + VGIC_NR_PRIVATE_IRQS)) + overflow = 1; + } + +epilog: + if (overflow) { + vgic_cpu->vgic_hcr |= GICH_HCR_UIE; + } else { + vgic_cpu->vgic_hcr &= ~GICH_HCR_UIE; + /* + * We're about to run this VCPU, and we've consumed + * everything the distributor had in store for + * us. Claim we don't have anything pending. We'll + * adjust that if needed while exiting. + */ + clear_bit(vcpu_id, &dist->irq_pending_on_cpu); + } +} + +static bool vgic_process_maintenance(struct kvm_vcpu *vcpu) +{ + struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu; + bool level_pending = false; + + kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr); + + /* + * We do not need to take the distributor lock here, since the only + * action we perform is clearing the irq_active_bit for an EOIed + * level interrupt. There is a potential race with + * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we + * check if the interrupt is already active. Two possibilities: + * + * - The queuing is occurring on the same vcpu: cannot happen, + * as we're already in the context of this vcpu, and + * executing the handler + * - The interrupt has been migrated to another vcpu, and we + * ignore this interrupt for this run. Big deal. It is still + * pending though, and will get considered when this vcpu + * exits. + */ + if (vgic_cpu->vgic_misr & GICH_MISR_EOI) { + /* + * Some level interrupts have been EOIed. Clear their + * active bit. + */ + int lr, irq; + + for_each_set_bit(lr, (unsigned long *)vgic_cpu->vgic_eisr, + vgic_cpu->nr_lr) { + irq = vgic_cpu->vgic_lr[lr] & GICH_LR_VIRTUALID; + + vgic_irq_clear_active(vcpu, irq); + vgic_cpu->vgic_lr[lr] &= ~GICH_LR_EOI; + + /* Any additional pending interrupt? */ + if (vgic_dist_irq_is_pending(vcpu, irq)) { + vgic_cpu_irq_set(vcpu, irq); + level_pending = true; + } else { + vgic_cpu_irq_clear(vcpu, irq); + } + } + } + + if (vgic_cpu->vgic_misr & GICH_MISR_U) + vgic_cpu->vgic_hcr &= ~GICH_HCR_UIE; + + return level_pending; +} + +/* + * Sync back the VGIC state after a guest run. We do not really touch + * the distributor here (the irq_pending_on_cpu bit is safe to set), + * so there is no need for taking its lock. + */ +static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu) +{ + struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu; + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + int lr, pending; + bool level_pending; + + level_pending = vgic_process_maintenance(vcpu); + + /* Clear mappings for empty LRs */ + for_each_set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr, + vgic_cpu->nr_lr) { + int irq; + + if (!test_and_clear_bit(lr, vgic_cpu->lr_used)) + continue; + + irq = vgic_cpu->vgic_lr[lr] & GICH_LR_VIRTUALID; + + BUG_ON(irq >= VGIC_NR_IRQS); + vgic_cpu->vgic_irq_lr_map[irq] = LR_EMPTY; + } + + /* Check if we still have something up our sleeve... */ + pending = find_first_zero_bit((unsigned long *)vgic_cpu->vgic_elrsr, + vgic_cpu->nr_lr); + if (level_pending || pending < vgic_cpu->nr_lr) + set_bit(vcpu->vcpu_id, &dist->irq_pending_on_cpu); +} + +void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + if (!irqchip_in_kernel(vcpu->kvm)) + return; + + spin_lock(&dist->lock); + __kvm_vgic_flush_hwstate(vcpu); + spin_unlock(&dist->lock); +} + +void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu) +{ + if (!irqchip_in_kernel(vcpu->kvm)) + return; + + __kvm_vgic_sync_hwstate(vcpu); +} + +int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + if (!irqchip_in_kernel(vcpu->kvm)) + return 0; + + return test_bit(vcpu->vcpu_id, &dist->irq_pending_on_cpu); +} + +static void vgic_kick_vcpus(struct kvm *kvm) +{ + struct kvm_vcpu *vcpu; + int c; + + /* + * We've injected an interrupt, time to find out who deserves + * a good kick... + */ + kvm_for_each_vcpu(c, vcpu, kvm) { + if (kvm_vgic_vcpu_pending_irq(vcpu)) + kvm_vcpu_kick(vcpu); + } +} + +static int vgic_validate_injection(struct kvm_vcpu *vcpu, int irq, int level) +{ + int is_edge = vgic_irq_is_edge(vcpu, irq); + int state = vgic_dist_irq_is_pending(vcpu, irq); + + /* + * Only inject an interrupt if: + * - edge triggered and we have a rising edge + * - level triggered and we change level + */ + if (is_edge) + return level > state; + else + return level != state; +} + +static bool vgic_update_irq_state(struct kvm *kvm, int cpuid, + unsigned int irq_num, bool level) +{ + struct vgic_dist *dist = &kvm->arch.vgic; + struct kvm_vcpu *vcpu; + int is_edge, is_level; + int enabled; + bool ret = true; + + spin_lock(&dist->lock); + + vcpu = kvm_get_vcpu(kvm, cpuid); + is_edge = vgic_irq_is_edge(vcpu, irq_num); + is_level = !is_edge; + + if (!vgic_validate_injection(vcpu, irq_num, level)) { + ret = false; + goto out; + } + + if (irq_num >= VGIC_NR_PRIVATE_IRQS) { + cpuid = dist->irq_spi_cpu[irq_num - VGIC_NR_PRIVATE_IRQS]; + vcpu = kvm_get_vcpu(kvm, cpuid); + } + + kvm_debug("Inject IRQ%d level %d CPU%d\n", irq_num, level, cpuid); + + if (level) + vgic_dist_irq_set(vcpu, irq_num); + else + vgic_dist_irq_clear(vcpu, irq_num); + + enabled = vgic_irq_is_enabled(vcpu, irq_num); + + if (!enabled) { + ret = false; + goto out; + } + + if (is_level && vgic_irq_is_active(vcpu, irq_num)) { + /* + * Level interrupt in progress, will be picked up + * when EOId. + */ + ret = false; + goto out; + } + + if (level) { + vgic_cpu_irq_set(vcpu, irq_num); + set_bit(cpuid, &dist->irq_pending_on_cpu); + } + +out: + spin_unlock(&dist->lock); + + return ret; +} + +/** + * kvm_vgic_inject_irq - Inject an IRQ from a device to the vgic + * @kvm: The VM structure pointer + * @cpuid: The CPU for PPIs + * @irq_num: The IRQ number that is assigned to the device + * @level: Edge-triggered: true: to trigger the interrupt + * false: to ignore the call + * Level-sensitive true: activates an interrupt + * false: deactivates an interrupt + * + * The GIC is not concerned with devices being active-LOW or active-HIGH for + * level-sensitive interrupts. You can think of the level parameter as 1 + * being HIGH and 0 being LOW and all devices being active-HIGH. + */ +int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int irq_num, + bool level) +{ + if (vgic_update_irq_state(kvm, cpuid, irq_num, level)) + vgic_kick_vcpus(kvm); + + return 0; +} + +static irqreturn_t vgic_maintenance_handler(int irq, void *data) +{ + /* + * We cannot rely on the vgic maintenance interrupt to be + * delivered synchronously. This means we can only use it to + * exit the VM, and we perform the handling of EOIed + * interrupts on the exit path (see vgic_process_maintenance). + */ + return IRQ_HANDLED; +} + +int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu) +{ + struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu; + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + int i; + + if (!irqchip_in_kernel(vcpu->kvm)) + return 0; + + if (vcpu->vcpu_id >= VGIC_MAX_CPUS) + return -EBUSY; + + for (i = 0; i < VGIC_NR_IRQS; i++) { + if (i < VGIC_NR_PPIS) + vgic_bitmap_set_irq_val(&dist->irq_enabled, + vcpu->vcpu_id, i, 1); + if (i < VGIC_NR_PRIVATE_IRQS) + vgic_bitmap_set_irq_val(&dist->irq_cfg, + vcpu->vcpu_id, i, VGIC_CFG_EDGE); + + vgic_cpu->vgic_irq_lr_map[i] = LR_EMPTY; + } + + /* + * By forcing VMCR to zero, the GIC will restore the binary + * points to their reset values. Anything else resets to zero + * anyway. + */ + vgic_cpu->vgic_vmcr = 0; + + vgic_cpu->nr_lr = vgic_nr_lr; + vgic_cpu->vgic_hcr = GICH_HCR_EN; /* Get the show on the road... */ + + return 0; +} + +static void vgic_init_maintenance_interrupt(void *info) +{ + enable_percpu_irq(vgic_maint_irq, 0); +} + +static int vgic_cpu_notify(struct notifier_block *self, + unsigned long action, void *cpu) +{ + switch (action) { + case CPU_STARTING: + case CPU_STARTING_FROZEN: + vgic_init_maintenance_interrupt(NULL); + break; + case CPU_DYING: + case CPU_DYING_FROZEN: + disable_percpu_irq(vgic_maint_irq); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block vgic_cpu_nb = { + .notifier_call = vgic_cpu_notify, +}; + +int kvm_vgic_hyp_init(void) +{ + int ret; + struct resource vctrl_res; + struct resource vcpu_res; + + vgic_node = of_find_compatible_node(NULL, NULL, "arm,cortex-a15-gic"); + if (!vgic_node) { + kvm_err("error: no compatible vgic node in DT\n"); + return -ENODEV; + } + + vgic_maint_irq = irq_of_parse_and_map(vgic_node, 0); + if (!vgic_maint_irq) { + kvm_err("error getting vgic maintenance irq from DT\n"); + ret = -ENXIO; + goto out; + } + + ret = request_percpu_irq(vgic_maint_irq, vgic_maintenance_handler, + "vgic", kvm_get_running_vcpus()); + if (ret) { + kvm_err("Cannot register interrupt %d\n", vgic_maint_irq); + goto out; + } + + ret = register_cpu_notifier(&vgic_cpu_nb); + if (ret) { + kvm_err("Cannot register vgic CPU notifier\n"); + goto out_free_irq; + } + + ret = of_address_to_resource(vgic_node, 2, &vctrl_res); + if (ret) { + kvm_err("Cannot obtain VCTRL resource\n"); + goto out_free_irq; + } + + vgic_vctrl_base = of_iomap(vgic_node, 2); + if (!vgic_vctrl_base) { + kvm_err("Cannot ioremap VCTRL\n"); + ret = -ENOMEM; + goto out_free_irq; + } + + vgic_nr_lr = readl_relaxed(vgic_vctrl_base + GICH_VTR); + vgic_nr_lr = (vgic_nr_lr & 0x3f) + 1; + + ret = create_hyp_io_mappings(vgic_vctrl_base, + vgic_vctrl_base + resource_size(&vctrl_res), + vctrl_res.start); + if (ret) { + kvm_err("Cannot map VCTRL into hyp\n"); + goto out_unmap; + } + + kvm_info("%s@%llx IRQ%d\n", vgic_node->name, + vctrl_res.start, vgic_maint_irq); + on_each_cpu(vgic_init_maintenance_interrupt, NULL, 1); + + if (of_address_to_resource(vgic_node, 3, &vcpu_res)) { + kvm_err("Cannot obtain VCPU resource\n"); + ret = -ENXIO; + goto out_unmap; + } + vgic_vcpu_base = vcpu_res.start; + + goto out; + +out_unmap: + iounmap(vgic_vctrl_base); +out_free_irq: + free_percpu_irq(vgic_maint_irq, kvm_get_running_vcpus()); +out: + of_node_put(vgic_node); + return ret; +} + +int kvm_vgic_init(struct kvm *kvm) +{ + int ret = 0, i; + + mutex_lock(&kvm->lock); + + if (vgic_initialized(kvm)) + goto out; + + if (IS_VGIC_ADDR_UNDEF(kvm->arch.vgic.vgic_dist_base) || + IS_VGIC_ADDR_UNDEF(kvm->arch.vgic.vgic_cpu_base)) { + kvm_err("Need to set vgic cpu and dist addresses first\n"); + ret = -ENXIO; + goto out; + } + + ret = kvm_phys_addr_ioremap(kvm, kvm->arch.vgic.vgic_cpu_base, + vgic_vcpu_base, KVM_VGIC_V2_CPU_SIZE); + if (ret) { + kvm_err("Unable to remap VGIC CPU to VCPU\n"); + goto out; + } + + for (i = VGIC_NR_PRIVATE_IRQS; i < VGIC_NR_IRQS; i += 4) + vgic_set_target_reg(kvm, 0, i); + + kvm_timer_init(kvm); + kvm->arch.vgic.ready = true; +out: + mutex_unlock(&kvm->lock); + return ret; +} + +int kvm_vgic_create(struct kvm *kvm) +{ + int ret = 0; + + mutex_lock(&kvm->lock); + + if (atomic_read(&kvm->online_vcpus) || kvm->arch.vgic.vctrl_base) { + ret = -EEXIST; + goto out; + } + + spin_lock_init(&kvm->arch.vgic.lock); + kvm->arch.vgic.vctrl_base = vgic_vctrl_base; + kvm->arch.vgic.vgic_dist_base = VGIC_ADDR_UNDEF; + kvm->arch.vgic.vgic_cpu_base = VGIC_ADDR_UNDEF; + +out: + mutex_unlock(&kvm->lock); + return ret; +} + +static bool vgic_ioaddr_overlap(struct kvm *kvm) +{ + phys_addr_t dist = kvm->arch.vgic.vgic_dist_base; + phys_addr_t cpu = kvm->arch.vgic.vgic_cpu_base; + + if (IS_VGIC_ADDR_UNDEF(dist) || IS_VGIC_ADDR_UNDEF(cpu)) + return 0; + if ((dist <= cpu && dist + KVM_VGIC_V2_DIST_SIZE > cpu) || + (cpu <= dist && cpu + KVM_VGIC_V2_CPU_SIZE > dist)) + return -EBUSY; + return 0; +} + +static int vgic_ioaddr_assign(struct kvm *kvm, phys_addr_t *ioaddr, + phys_addr_t addr, phys_addr_t size) +{ + int ret; + + if (!IS_VGIC_ADDR_UNDEF(*ioaddr)) + return -EEXIST; + if (addr + size < addr) + return -EINVAL; + + ret = vgic_ioaddr_overlap(kvm); + if (ret) + return ret; + *ioaddr = addr; + return ret; +} + +int kvm_vgic_set_addr(struct kvm *kvm, unsigned long type, u64 addr) +{ + int r = 0; + struct vgic_dist *vgic = &kvm->arch.vgic; + + if (addr & ~KVM_PHYS_MASK) + return -E2BIG; + + if (addr & ~PAGE_MASK) + return -EINVAL; + + mutex_lock(&kvm->lock); + switch (type) { + case KVM_VGIC_V2_ADDR_TYPE_DIST: + r = vgic_ioaddr_assign(kvm, &vgic->vgic_dist_base, + addr, KVM_VGIC_V2_DIST_SIZE); + break; + case KVM_VGIC_V2_ADDR_TYPE_CPU: + r = vgic_ioaddr_assign(kvm, &vgic->vgic_cpu_base, + addr, KVM_VGIC_V2_CPU_SIZE); + break; + default: + r = -ENODEV; + } + + mutex_unlock(&kvm->lock); + return r; +} diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 958358c..6071f4c 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -352,12 +352,6 @@ config MACH_USB_A9263 Select this if you are using a Calao Systems USB-A9263. <http://www.calao-systems.com> -config MACH_NEOCORE926 - bool "Adeneo NEOCORE926" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using the Adeneo Neocore 926 board. - endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index b38a1dc..39218ca 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -66,7 +66,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o # AT91SAM9263 board-specific support obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o -obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o # AT91SAM9RL board-specific support obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 7aeb473..9706c00 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -210,6 +210,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk), CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffb4000.mmc", &mmc_clk), + CLKDEV_CON_DEV_ID("emac_clk", "fffbc000.ethernet", ðer_clk), CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index cafe988..2acdff4 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -265,17 +264,10 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ - clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); - clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); - clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt); + clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + 2, AT91_ST_ALMV); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); } - -struct sys_timer at91rm9200_timer = { - .init = at91rm9200_timer_init, -}; - diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 358412f..3a4bc2e 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -104,12 +104,38 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) } } +static void at91sam926x_pit_suspend(struct clock_event_device *cedev) +{ + /* Disable timer */ + pit_write(AT91_PIT_MR, 0); +} + +static void at91sam926x_pit_reset(void) +{ + /* Disable timer and irqs */ + pit_write(AT91_PIT_MR, 0); + + /* Clear any pending interrupts, wait for PIT to stop counting */ + while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0) + cpu_relax(); + + /* Start PIT but don't enable IRQ */ + pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); +} + +static void at91sam926x_pit_resume(struct clock_event_device *cedev) +{ + at91sam926x_pit_reset(); +} + static struct clock_event_device pit_clkevt = { .name = "pit", .features = CLOCK_EVT_FEAT_PERIODIC, .shift = 32, .rating = 100, .set_mode = pit_clkevt_mode, + .suspend = at91sam926x_pit_suspend, + .resume = at91sam926x_pit_resume, }; @@ -150,19 +176,6 @@ static struct irqaction at91sam926x_pit_irq = { .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; -static void at91sam926x_pit_reset(void) -{ - /* Disable timer and irqs */ - pit_write(AT91_PIT_MR, 0); - - /* Clear any pending interrupts, wait for PIT to stop counting */ - while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0) - cpu_relax(); - - /* Start PIT but don't enable IRQ */ - pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN); -} - #ifdef CONFIG_OF static struct of_device_id pit_timer_ids[] = { { .compatible = "atmel,at91sam9260-pit" }, @@ -211,7 +224,7 @@ static int __init of_at91sam926x_pit_init(void) /* * Set up both clocksource and clockevent support. */ -static void __init at91sam926x_pit_init(void) +void __init at91sam926x_pit_init(void) { unsigned long pit_rate; unsigned bits; @@ -250,12 +263,6 @@ static void __init at91sam926x_pit_init(void) clockevents_register_device(&pit_clkevt); } -static void at91sam926x_pit_suspend(void) -{ - /* Disable timer */ - pit_write(AT91_PIT_MR, 0); -} - void __init at91sam926x_ioremap_pit(u32 addr) { #if defined(CONFIG_OF) @@ -272,9 +279,3 @@ void __init at91sam926x_ioremap_pit(u32 addr) if (!pit_base_addr) panic("Impossible to ioremap PIT\n"); } - -struct sys_timer at91sam926x_timer = { - .init = at91sam926x_pit_init, - .suspend = at91sam926x_pit_suspend, - .resume = at91sam926x_pit_reset, -}; diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index 0e57e44..0c07a44 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -42,9 +42,10 @@ #define AT91_TC_CLK1BASE 0x40 #define AT91_TC_CLK2BASE 0x80 -static unsigned long at91x40_gettimeoffset(void) +static u32 at91x40_gettimeoffset(void) { - return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128)); + return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / + (AT91X40_MASTER_CLOCK / 128)) * 1000; } static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id) @@ -64,6 +65,8 @@ void __init at91x40_timer_init(void) { unsigned int v; + arch_gettimeoffset = at91x40_gettimeoffset; + at91_tc_write(AT91_TC_BCR, 0); v = at91_tc_read(AT91_TC_BMR); v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE; @@ -79,9 +82,3 @@ void __init at91x40_timer_init(void) at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN)); } - -struct sys_timer at91x40_timer = { - .init = at91x40_timer_init, - .offset = at91x40_gettimeoffset, -}; - diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index b99b575..35ab632 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -90,7 +90,7 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = onearm_init_early, diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 854b979..f95e31c 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -210,7 +210,7 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = afeb9260_init_early, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 28a18ce..ade948b 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -187,7 +187,7 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = cam60_init_early, diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index c17bb53..9298305 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -157,7 +157,7 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = carmeva_init_early, diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 8474324..008527e 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -374,7 +374,7 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260") MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = cpu9krea_init_early, diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2a7af78..42f1353 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -178,7 +178,7 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = cpuat91_init_early, diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 48a531e..e5fde215 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -251,7 +251,7 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = csb337_init_early, diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index ec0f3ab..fdf1106 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -132,7 +132,7 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = csb637_init_early, diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index 881170c..8db3013 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -49,7 +49,7 @@ static const char *at91_dt_board_compat[] __initdata = { DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index b489388..becf0a6 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -44,7 +44,7 @@ static void __init at91eb01_init_early(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ - .timer = &at91x40_timer, + .init_time = at91x40_timer_init, .handle_irq = at91_aic_handle_irq, .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 9f5e71c..f9be816 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -116,7 +116,7 @@ static void __init eb9200_board_init(void) } MACHINE_START(ATEB9200, "Embest ATEB9200") - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = eb9200_init_early, diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index ef69e0e..b2fcd71 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -181,7 +181,7 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ecb_at91init_early, diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 50f3d37..77de410 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -149,7 +149,7 @@ static void __init eco920_board_init(void) MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = eco920_init_early, diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 5d44eba..737c085 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -159,7 +159,7 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = flexibity_init_early, diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 191d37c..2ea7059 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -261,7 +261,7 @@ static void __init foxg20_board_init(void) MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = foxg20_init_early, diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 23a2fa1..c1d61d2 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -574,7 +574,7 @@ static void __init gsia18s_board_init(void) } MACHINE_START(GSIA18S, "GS_IA18_S") - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = gsia18s_init_early, diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 9a43d1e..88e2f5d 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -103,7 +103,7 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = kafa_init_early, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index f168bec..0c519d9 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -149,7 +149,7 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = kb9202_init_early, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c deleted file mode 100644 index bc7a1c4..0000000 --- a/arch/arm/mach-at91/board-neocore926.c +++ /dev/null @@ -1,387 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-neocore926.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation - * Copyright (C) 2008 ADENEO. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/fb.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> - -#include <video/atmel_lcdc.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -#include <asm/sizes.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" - - -static void __init neocore926_init_early(void) -{ - /* Initialize processor: 20 MHz crystal */ - at91_initialize(20000000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata neocore926_usbh_data = { - .ports = 2, - .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata neocore926_udc_data = { - .vbus_pin = AT91_PIN_PA25, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * ADS7846 Touchscreen - */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */ -} - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, - .x_plate_ohms = 450, - .y_plate_ohms = 250, - .pressure_max = 15000, - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; - -static void __init neocore926_add_device_ts(void) -{ - at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */ - at91_set_gpio_input(AT91_PIN_PC13, 1); /* Touchscreen BUSY signal */ -} -#else -static void __init neocore926_add_device_ts(void) {} -#endif - -/* - * SPI devices. - */ -static struct spi_board_info neocore926_spi_devices[] = { -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .chip_select = 1, - .max_speed_hz = 125000 * 16, - .bus_num = 0, - .platform_data = &ads_info, - .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, - }, -#endif -}; - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata neocore926_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PE18, - .wp_pin = AT91_PIN_PE19, - }, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata neocore926_macb_data = { - .phy_irq_pin = AT91_PIN_PE31, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata neocore926_nand_partition[] = { - { - .name = "Linux Kernel", /* "Partition 1", */ - .offset = 0, - .size = SZ_8M, - }, - { - .name = "Filesystem", /* "Partition 2", */ - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_32M, - }, - { - .name = "Free", /* "Partition 3", */ - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata neocore926_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PB19, - .rdy_pin_active_low = 1, - .enable_pin = AT91_PIN_PD15, - .ecc_mode = NAND_ECC_SOFT, - .parts = neocore926_nand_partition, - .num_parts = ARRAY_SIZE(neocore926_nand_partition), - .det_pin = -EINVAL, -}; - -static struct sam9_smc_config __initdata neocore926_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 6, - .write_cycle = 6, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static void __init neocore926_add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &neocore926_nand_smc_config); - - at91_add_device_nand(&neocore926_nand_data); -} - - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", - .refresh = 60, - .xres = 240, .yres = 320, - .pixclock = KHZ2PICOS(5000), - - .left_margin = 1, .right_margin = 33, - .upper_margin = 1, .lower_margin = 0, - .hsync_len = 5, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D70VM1CCA", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -static void at91_lcdc_power_control(int on) -{ - at91_set_gpio_value(AT91_PIN_PA30, on); -} - -/* Driver datas */ -static struct atmel_lcdfb_info __initdata neocore926_lcdc_data = { - .lcdcon_is_backlight = true, - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, - .guard_time = 1, - .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB555, -}; - -#else -static struct atmel_lcdfb_info __initdata neocore926_lcdc_data; -#endif - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button neocore926_buttons[] = { - { /* BP1, "leftclic" */ - .code = BTN_LEFT, - .gpio = AT91_PIN_PC5, - .active_low = 1, - .desc = "left_click", - .wakeup = 1, - }, - { /* BP2, "rightclic" */ - .code = BTN_RIGHT, - .gpio = AT91_PIN_PC4, - .active_low = 1, - .desc = "right_click", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data neocore926_button_data = { - .buttons = neocore926_buttons, - .nbuttons = ARRAY_SIZE(neocore926_buttons), -}; - -static struct platform_device neocore926_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &neocore926_button_data, - } -}; - -static void __init neocore926_add_device_buttons(void) -{ - at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */ - at91_set_deglitch(AT91_PIN_PC5, 1); - at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */ - at91_set_deglitch(AT91_PIN_PC4, 1); - - platform_device_register(&neocore926_button_device); -} -#else -static void __init neocore926_add_device_buttons(void) {} -#endif - - -/* - * AC97 - */ -static struct ac97c_platform_data neocore926_ac97_data = { - .reset_pin = AT91_PIN_PA13, -}; - - -static void __init neocore926_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - - /* USB Host */ - at91_add_device_usbh(&neocore926_usbh_data); - - /* USB Device */ - at91_add_device_udc(&neocore926_udc_data); - - /* SPI */ - at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */ - at91_add_device_spi(neocore926_spi_devices, ARRAY_SIZE(neocore926_spi_devices)); - - /* Touchscreen */ - neocore926_add_device_ts(); - - /* MMC */ - at91_add_device_mci(0, &neocore926_mci0_data); - - /* Ethernet */ - at91_add_device_eth(&neocore926_macb_data); - - /* NAND */ - neocore926_add_device_nand(); - - /* I2C */ - at91_add_device_i2c(NULL, 0); - - /* LCD Controller */ - at91_add_device_lcdc(&neocore926_lcdc_data); - - /* Push Buttons */ - neocore926_add_device_buttons(); - - /* AC97 */ - at91_add_device_ac97(&neocore926_ac97_data); -} - -MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") - /* Maintainer: ADENEO */ - .timer = &at91sam926x_timer, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = neocore926_init_early, - .init_irq = at91_init_irq_default, - .init_machine = neocore926_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 0299554..65c0d6b 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -217,7 +217,7 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = pcontrol_g20_init_early, diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 4938f1c..ab2b2ec 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -119,7 +119,7 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = picotux200_init_early, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 33b1628..aa3bc9b 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -257,7 +257,7 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c index 5f9ce3d..3fcb662 100644 --- a/arch/arm/mach-at91/board-rm9200-dt.c +++ b/arch/arm/mach-at91/board-rm9200-dt.c @@ -47,7 +47,7 @@ static const char *at91rm9200_dt_board_compat[] __initdata = { }; DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = at91rm9200_dt_initialize, diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 9e5061b..690541b 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -219,7 +219,7 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = dk_init_early, diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 58277db..8b17dad 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -186,7 +186,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index 2e8b833..f6d7f19 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -222,7 +222,7 @@ static void __init rsi_ews_board_init(void) MACHINE_START(RSI_EWS, "RSI EWS") /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = rsi_ews_init_early, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index b75fbf6..43ee4dc 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -218,7 +218,7 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index f0135cd..0b153c8 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -343,7 +343,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 13ebaa8..b446645 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -612,7 +612,7 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 89b9608..3284df0 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -443,7 +443,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 1b7dd9f..f9cd1f2 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -409,7 +409,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, @@ -419,7 +419,7 @@ MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index e4cc375..2a94896 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -502,7 +502,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 377a109..aa265dc 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -320,7 +320,7 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 9877150..3aaa978 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -177,7 +177,7 @@ static void __init snapper9260_board_init(void) } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = snapper9260_init_early, diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 48a962b..a033b8d 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -272,7 +272,7 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, @@ -282,7 +282,7 @@ MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index c1060f9..2487d94 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -355,7 +355,7 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, @@ -365,7 +365,7 @@ MACHINE_END MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, @@ -375,7 +375,7 @@ MACHINE_END MACHINE_START(USB_A9G20, "CALAO USB_A92G0") /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */ - .timer = &at91sam926x_timer, + .init_time = at91sam926x_pit_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 8673aeb..be08377 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -587,7 +587,7 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ - .timer = &at91rm9200_timer, + .init_time = at91rm9200_timer_init, .map_io = at91_map_io, .handle_irq = at91_aic_handle_irq, .init_early = yl9200_init_early, diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index fc593d6..78ab065 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -36,12 +36,11 @@ extern int __init at91_aic5_of_init(struct device_node *node, /* Timer */ -struct sys_timer; extern void at91rm9200_ioremap_st(u32 addr); -extern struct sys_timer at91rm9200_timer; +extern void at91rm9200_timer_init(void); extern void at91sam926x_ioremap_pit(u32 addr); -extern struct sys_timer at91sam926x_timer; -extern struct sys_timer at91x40_timer; +extern void at91sam926x_pit_init(void); +extern void at91x40_timer_init(void); /* Clocks */ #ifdef CONFIG_AT91_PMC_UNIT diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h index 97ad68a..5659f7c 100644 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ b/arch/arm/mach-at91/include/mach/uncompress.h @@ -196,6 +196,4 @@ static inline void flush(void) barrier(); } -#define arch_decomp_wdog() - #endif diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 48705c1..bf02471 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -7,7 +7,6 @@ config ARCH_BCM select ARM_GIC select CPU_V7 select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select GENERIC_TIME select GPIO_BCM select SPARSE_IRQ diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c index 3a62f1b..f0f9aba 100644 --- a/arch/arm/mach-bcm/board_bcm.c +++ b/arch/arm/mach-bcm/board_bcm.c @@ -11,34 +11,19 @@ * GNU General Public License for more details. */ -#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/init.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/irqchip.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> - #include <asm/mach/time.h> -static const struct of_device_id irq_match[] = { - {.compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - {} -}; - static void timer_init(void) { } -static struct sys_timer timer = { - .init = timer_init, -}; - -static void __init init_irq(void) -{ - of_irq_init(irq_match); -} static void __init board_init(void) { @@ -49,9 +34,8 @@ static void __init board_init(void) static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, }; DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor") - .init_irq = init_irq, - .timer = &timer, + .init_irq = irqchip_init, + .init_time = timer_init, .init_machine = board_init, .dt_compat = bcm11351_dt_compat, - .handle_irq = gic_handle_irq, MACHINE_END diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c index f0d739f..6f57859 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -17,8 +17,8 @@ #include <linux/irqchip/bcm2835.h> #include <linux/of_address.h> #include <linux/of_platform.h> -#include <linux/bcm2835_timer.h> #include <linux/clk/bcm2835.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -26,11 +26,13 @@ #include <mach/bcm2835_soc.h> #define PM_RSTC 0x1c +#define PM_RSTS 0x20 #define PM_WDOG 0x24 #define PM_PASSWORD 0x5a000000 #define PM_RSTC_WRCFG_MASK 0x00000030 #define PM_RSTC_WRCFG_FULL_RESET 0x00000020 +#define PM_RSTS_HADWRH_SET 0x00000040 static void __iomem *wdt_regs; @@ -67,6 +69,29 @@ static void bcm2835_restart(char mode, const char *cmd) mdelay(1); } +/* + * We can't really power off, but if we do the normal reset scheme, and + * indicate to bootcode.bin not to reboot, then most of the chip will be + * powered off. + */ +static void bcm2835_power_off(void) +{ + u32 val; + + /* + * We set the watchdog hard reset bit here to distinguish this reset + * from the normal (full) reset. bootcode.bin will not reboot after a + * hard reset. + */ + val = readl_relaxed(wdt_regs + PM_RSTS); + val &= ~PM_RSTC_WRCFG_MASK; + val |= PM_PASSWORD | PM_RSTS_HADWRH_SET; + writel_relaxed(val, wdt_regs + PM_RSTS); + + /* Continue with normal reset mechanism */ + bcm2835_restart(0, ""); +} + static struct map_desc io_map __initdata = { .virtual = BCM2835_PERIPH_VIRT, .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS), @@ -84,6 +109,9 @@ static void __init bcm2835_init(void) int ret; bcm2835_setup_restart(); + if (wdt_regs) + pm_power_off = bcm2835_power_off; + bcm2835_init_clocks(); ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, @@ -104,7 +132,7 @@ DT_MACHINE_START(BCM2835, "BCM2835") .init_irq = bcm2835_init_irq, .handle_irq = bcm2835_handle_irq, .init_machine = bcm2835_init, - .timer = &bcm2835_timer, + .init_time = clocksource_of_init, .restart = bcm2835_restart, .dt_compat = bcm2835_compat MACHINE_END diff --git a/arch/arm/mach-bcm2835/include/mach/uncompress.h b/arch/arm/mach-bcm2835/include/mach/uncompress.h index cc46dcc..bf86dca 100644 --- a/arch/arm/mach-bcm2835/include/mach/uncompress.h +++ b/arch/arm/mach-bcm2835/include/mach/uncompress.h @@ -42,4 +42,3 @@ static inline void flush(void) } #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c index 3fbf43f..f385847 100644 --- a/arch/arm/mach-clps711x/board-autcpu12.c +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -170,7 +170,7 @@ MACHINE_START(AUTCPU12, "autronix autcpu12") .nr_irqs = CLPS711X_NR_IRQS, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, + .init_time = clps711x_timer_init, .init_machine = autcpu12_init, .init_late = autcpu12_init_late, .handle_irq = clps711x_handle_irq, diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c index 60900dd..baab7da 100644 --- a/arch/arm/mach-clps711x/board-cdb89712.c +++ b/arch/arm/mach-clps711x/board-cdb89712.c @@ -140,7 +140,7 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712") .nr_irqs = CLPS711X_NR_IRQS, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, + .init_time = clps711x_timer_init, .init_machine = cdb89712_init, .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c index 0b32a48..014aa3c 100644 --- a/arch/arm/mach-clps711x/board-clep7312.c +++ b/arch/arm/mach-clps711x/board-clep7312.c @@ -40,7 +40,7 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") .fixup = fixup_clep7312, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, + .init_time = clps711x_timer_init, .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c index 71aa5cf..5f928e9 100644 --- a/arch/arm/mach-clps711x/board-edb7211.c +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -173,7 +173,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") .reserve = edb7211_reserve, .map_io = edb7211_map_io, .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, + .init_time = clps711x_timer_init, .init_machine = edb7211_init, .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c index 7d01255..c5675ef 100644 --- a/arch/arm/mach-clps711x/board-fortunet.c +++ b/arch/arm/mach-clps711x/board-fortunet.c @@ -78,7 +78,7 @@ MACHINE_START(FORTUNET, "ARM-FortuNet") .fixup = fortunet_fixup, .map_io = clps711x_map_io, .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, + .init_time = clps711x_timer_init, .handle_irq = clps711x_handle_irq, .restart = clps711x_restart, MACHINE_END diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c index 1518fc8..8d3ee67 100644 --- a/arch/arm/mach-clps711x/board-p720t.c +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -224,7 +224,7 @@ MACHINE_START(P720T, "ARM-Prospector720T") .map_io = p720t_map_io, .init_early = p720t_init_early, .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, + .init_time = clps711x_timer_init, .init_machine = p720t_init, .init_late = p720t_init_late, .handle_irq = clps711x_handle_irq, diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index e046439..20ff50f 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -282,7 +282,7 @@ static void add_fixed_clk(struct clk *clk, const char *name, int rate) clk_register_clkdev(clk, name, NULL); } -static void __init clps711x_timer_init(void) +void __init clps711x_timer_init(void) { int osc, ext, pll, cpu, bus, timl, timh, uart, spi; u32 tmp; @@ -345,10 +345,6 @@ static void __init clps711x_timer_init(void) setup_irq(IRQ_TC2OI, &clps711x_timer_irq); } -struct sys_timer clps711x_timer = { - .init = clps711x_timer_init, -}; - void clps711x_restart(char mode, const char *cmd) { soft_restart(0); diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index b7c0c75..f84a729 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -8,10 +8,8 @@ #define CLPS711X_NR_GPIO (4 * 8 + 3) #define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit)) -struct sys_timer; - extern void clps711x_map_io(void); extern void clps711x_init_irq(void); +extern void clps711x_timer_init(void); extern void clps711x_handle_irq(struct pt_regs *regs); extern void clps711x_restart(char mode, const char *cmd); -extern struct sys_timer clps711x_timer; diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h index 7b28d6a..5f02d06 100644 --- a/arch/arm/mach-clps711x/include/mach/uncompress.h +++ b/arch/arm/mach-clps711x/include/mach/uncompress.h @@ -53,5 +53,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index ae30539..a71867e 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -28,7 +28,6 @@ #include <linux/usb/ohci_pdriver.h> #include <asm/setup.h> #include <asm/mach-types.h> -#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -250,8 +249,7 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") .atag_offset = 0x100, .map_io = cns3420_map_io, .init_irq = cns3xxx_init_irq, - .timer = &cns3xxx_timer, - .handle_irq = gic_handle_irq, + .init_time = cns3xxx_timer_init, .init_machine = cns3420_init, .restart = cns3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 031805b..e698f26 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -12,10 +12,10 @@ #include <linux/interrupt.h> #include <linux/clockchips.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> -#include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <mach/cns3xxx.h> #include "core.h" @@ -134,7 +134,6 @@ static int cns3xxx_timer_set_next_event(unsigned long evt, static struct clock_event_device cns3xxx_tmr1_clockevent = { .name = "cns3xxx timer1", - .shift = 8, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = cns3xxx_timer_set_mode, .set_next_event = cns3xxx_timer_set_next_event, @@ -145,15 +144,9 @@ static struct clock_event_device cns3xxx_tmr1_clockevent = { static void __init cns3xxx_clockevents_init(unsigned int timer_irq) { cns3xxx_tmr1_clockevent.irq = timer_irq; - cns3xxx_tmr1_clockevent.mult = - div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC, - cns3xxx_tmr1_clockevent.shift); - cns3xxx_tmr1_clockevent.max_delta_ns = - clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent); - cns3xxx_tmr1_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent); - - clockevents_register_device(&cns3xxx_tmr1_clockevent); + clockevents_config_and_register(&cns3xxx_tmr1_clockevent, + (cns3xxx_cpu_clock() >> 3) * 1000000, + 0xf, 0xffffffff); } /* @@ -235,17 +228,13 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq) cns3xxx_clockevents_init(timer_irq); } -static void __init cns3xxx_timer_init(void) +void __init cns3xxx_timer_init(void) { cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT); __cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0); } -struct sys_timer cns3xxx_timer = { - .init = cns3xxx_timer_init, -}; - #ifdef CONFIG_CACHE_L2X0 void __init cns3xxx_l2x0_init(void) diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h index 4894b8c..b23b17b 100644 --- a/arch/arm/mach-cns3xxx/core.h +++ b/arch/arm/mach-cns3xxx/core.h @@ -11,7 +11,7 @@ #ifndef __CNS3XXX_CORE_H #define __CNS3XXX_CORE_H -extern struct sys_timer cns3xxx_timer; +extern void cns3xxx_timer_init(void); #ifdef CONFIG_CACHE_L2X0 void __init cns3xxx_l2x0_init(void); diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h index a91b605..7a030b9 100644 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -51,4 +51,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 0153950..a075b3e 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -62,6 +62,7 @@ config MACH_DA8XX_DT bool "Support DA8XX platforms using device tree" default y depends on ARCH_DAVINCI_DA8XX + select PINCTRL help Say y here to include support for TI DaVinci DA850 based using Flattened Device Tree. More information at Documentation/devicetree diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 95b5e10..6da25ee 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -652,8 +652,13 @@ static __init void da830_evm_init(void) if (ret) pr_warning("da830_evm_init: rtc setup failed: %d\n", ret); - ret = da8xx_register_spi(0, da830evm_spi_info, - ARRAY_SIZE(da830evm_spi_info)); + ret = spi_register_board_info(da830evm_spi_info, + ARRAY_SIZE(da830evm_spi_info)); + if (ret) + pr_warn("%s: spi info registration failed: %d\n", __func__, + ret); + + ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info)); if (ret) pr_warning("da830_evm_init: spi 0 registration failed: %d\n", ret); @@ -679,7 +684,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM") .atag_offset = 0x100, .map_io = da830_evm_map_io, .init_irq = cp_intc_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = da830_evm_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 0299915..c2dfe06 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -349,13 +349,13 @@ static inline void da850_evm_setup_nor_nand(void) if (!HAS_MMC) { ret = davinci_cfg_reg_list(da850_evm_nand_pins); if (ret) - pr_warning("da850_evm_init: nand mux setup failed: " - "%d\n", ret); + pr_warn("%s: NAND mux setup failed: %d\n", + __func__, ret); ret = davinci_cfg_reg_list(da850_evm_nor_pins); if (ret) - pr_warning("da850_evm_init: nor mux setup failed: %d\n", - ret); + pr_warn("%s: NOR mux setup failed: %d\n", + __func__, ret); da850_evm_init_nor(); @@ -477,19 +477,19 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]); if (ret) { - pr_warning("Cannot open UI expander pin %d\n", sel_a); + pr_warn("Cannot open UI expander pin %d\n", sel_a); goto exp_setup_sela_fail; } ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]); if (ret) { - pr_warning("Cannot open UI expander pin %d\n", sel_b); + pr_warn("Cannot open UI expander pin %d\n", sel_b); goto exp_setup_selb_fail; } ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]); if (ret) { - pr_warning("Cannot open UI expander pin %d\n", sel_c); + pr_warn("Cannot open UI expander pin %d\n", sel_c); goto exp_setup_selc_fail; } @@ -501,7 +501,7 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, da850_evm_ui_keys_init(gpio); ret = platform_device_register(&da850_evm_ui_keys_device); if (ret) { - pr_warning("Could not register UI GPIO expander push-buttons"); + pr_warn("Could not register UI GPIO expander push-buttons"); goto exp_setup_keys_fail; } @@ -690,14 +690,14 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client, da850_evm_bb_keys_init(gpio); ret = platform_device_register(&da850_evm_bb_keys_device); if (ret) { - pr_warning("Could not register baseboard GPIO expander keys"); + pr_warn("Could not register baseboard GPIO expander keys"); goto io_exp_setup_sw_fail; } da850_evm_bb_leds_init(gpio); ret = platform_device_register(&da850_evm_bb_leds_device); if (ret) { - pr_warning("Could not register baseboard GPIO expander LEDS"); + pr_warn("Could not register baseboard GPIO expander LEDs"); goto io_exp_setup_leds_fail; } @@ -1065,21 +1065,19 @@ static int __init da850_evm_config_emac(void) } if (ret) - pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n", - ret); + pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n", + __func__, ret); /* configure the CFGCHIP3 register for RMII or MII */ __raw_writel(val, cfg_chip3_base); ret = davinci_cfg_reg(DA850_GPIO2_6); if (ret) - pr_warning("da850_evm_init:GPIO(2,6) mux setup " - "failed\n"); + pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__); ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en"); if (ret) { - pr_warning("Cannot open GPIO %d\n", - DA850_MII_MDIO_CLKEN_PIN); + pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN); return ret; } @@ -1090,8 +1088,7 @@ static int __init da850_evm_config_emac(void) ret = da8xx_register_emac(); if (ret) - pr_warning("da850_evm_init: emac registration failed: %d\n", - ret); + pr_warn("%s: EMAC registration failed: %d\n", __func__, ret); return 0; } @@ -1256,11 +1253,24 @@ static struct vpif_capture_config da850_vpif_capture_config = { }; /* VPIF display configuration */ + +static struct adv7343_platform_data adv7343_pdata = { + .mode_config = { + .dac_3 = 1, + .dac_2 = 1, + .dac_1 = 1, + }, + .sd_config = { + .sd_dac_out1 = 1, + }, +}; + static struct vpif_subdev_info da850_vpif_subdev[] = { { .name = "adv7343", .board_info = { I2C_BOARD_INFO("adv7343", 0x2a), + .platform_data = &adv7343_pdata, }, }, }; @@ -1443,57 +1453,53 @@ static __init void da850_evm_init(void) ret = pmic_tps65070_init(); if (ret) - pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n", - ret); + pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret); ret = da850_register_edma(da850_edma_rsv); if (ret) - pr_warning("da850_evm_init: edma registration failed: %d\n", - ret); + pr_warn("%s: EDMA registration failed: %d\n", __func__, ret); ret = davinci_cfg_reg_list(da850_i2c0_pins); if (ret) - pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n", - ret); + pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret); ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata); if (ret) - pr_warning("da850_evm_init: i2c0 registration failed: %d\n", - ret); + pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret); ret = da8xx_register_watchdog(); if (ret) - pr_warning("da830_evm_init: watchdog registration failed: %d\n", - ret); + pr_warn("%s: watchdog registration failed: %d\n", + __func__, ret); if (HAS_MMC) { ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins); if (ret) - pr_warning("da850_evm_init: mmcsd0 mux setup failed:" - " %d\n", ret); + pr_warn("%s: MMCSD0 mux setup failed: %d\n", + __func__, ret); ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n"); if (ret) - pr_warning("da850_evm_init: can not open GPIO %d\n", - DA850_MMCSD_CD_PIN); + pr_warn("%s: can not open GPIO %d\n", + __func__, DA850_MMCSD_CD_PIN); gpio_direction_input(DA850_MMCSD_CD_PIN); ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n"); if (ret) - pr_warning("da850_evm_init: can not open GPIO %d\n", - DA850_MMCSD_WP_PIN); + pr_warn("%s: can not open GPIO %d\n", + __func__, DA850_MMCSD_WP_PIN); gpio_direction_input(DA850_MMCSD_WP_PIN); ret = da8xx_register_mmcsd0(&da850_mmc_config); if (ret) - pr_warning("da850_evm_init: mmcsd0 registration failed:" - " %d\n", ret); + pr_warn("%s: MMCSD0 registration failed: %d\n", + __func__, ret); ret = da850_wl12xx_init(); if (ret) - pr_warning("da850_evm_init: wl12xx initialization" - " failed: %d\n", ret); + pr_warn("%s: WL12xx initialization failed: %d\n", + __func__, ret); } davinci_serial_init(&da850_evm_uart_config); @@ -1511,16 +1517,14 @@ static __init void da850_evm_init(void) ret = davinci_cfg_reg_list(da850_evm_mcasp_pins); if (ret) - pr_warning("da850_evm_init: mcasp mux setup failed: %d\n", - ret); + pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret); da850_evm_snd_data.sram_pool = sram_get_gen_pool(); da8xx_register_mcasp(0, &da850_evm_snd_data); ret = davinci_cfg_reg_list(da850_lcdcntl_pins); if (ret) - pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", - ret); + pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret); ret = da8xx_register_uio_pruss(); if (ret) @@ -1530,51 +1534,49 @@ static __init void da850_evm_init(void) /* Handle board specific muxing for LCD here */ ret = davinci_cfg_reg_list(da850_evm_lcdc_pins); if (ret) - pr_warning("da850_evm_init: evm specific lcd mux setup " - "failed: %d\n", ret); + pr_warn("%s: EVM specific LCD mux setup failed: %d\n", + __func__, ret); ret = da850_lcd_hw_init(); if (ret) - pr_warning("da850_evm_init: lcd initialization failed: %d\n", - ret); + pr_warn("%s: LCD initialization failed: %d\n", __func__, ret); sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl, ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata); if (ret) - pr_warning("da850_evm_init: lcdc registration failed: %d\n", - ret); + pr_warn("%s: LCDC registration failed: %d\n", __func__, ret); ret = da8xx_register_rtc(); if (ret) - pr_warning("da850_evm_init: rtc setup failed: %d\n", ret); + pr_warn("%s: RTC setup failed: %d\n", __func__, ret); ret = da850_evm_init_cpufreq(); if (ret) - pr_warning("da850_evm_init: cpufreq registration failed: %d\n", - ret); + pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret); ret = da8xx_register_cpuidle(); if (ret) - pr_warning("da850_evm_init: cpuidle registration failed: %d\n", - ret); + pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret); ret = da850_register_pm(&da850_pm_device); if (ret) - pr_warning("da850_evm_init: suspend registration failed: %d\n", - ret); + pr_warn("%s: suspend registration failed: %d\n", __func__, ret); da850_vpif_init(); - ret = da8xx_register_spi(1, da850evm_spi_info, - ARRAY_SIZE(da850evm_spi_info)); + ret = spi_register_board_info(da850evm_spi_info, + ARRAY_SIZE(da850evm_spi_info)); if (ret) - pr_warning("da850_evm_init: spi 1 registration failed: %d\n", - ret); + pr_warn("%s: spi info registration failed: %d\n", __func__, + ret); + + ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info)); + if (ret) + pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret); ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE); if (ret) - pr_warning("da850_evm_init: sata registration failed: %d\n", - ret); + pr_warn("%s: SATA registration failed: %d\n", __func__, ret); da850_evm_setup_mac_addr(); } @@ -1599,7 +1601,7 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") .atag_offset = 0x100, .map_io = da850_evm_map_io, .init_irq = cp_intc_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = da850_evm_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index cdf8d07..147b8e1 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -355,7 +355,7 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") .atag_offset = 0x100, .map_io = dm355_evm_map_io, .init_irq = davinci_irq_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = dm355_evm_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index d419545..dff4ddc 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -274,7 +274,7 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") .atag_offset = 0x100, .map_io = dm355_leopard_map_io, .init_irq = davinci_irq_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = dm355_leopard_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 5d49c75..c2d4958 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -616,7 +616,7 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") .atag_offset = 0x100, .map_io = dm365_evm_map_io, .init_irq = davinci_irq_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = dm365_evm_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index f5e018d..71735e7 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -690,7 +690,7 @@ static struct vpbe_output dm644xevm_vpbe_outputs[] = { .std = VENC_STD_ALL, .capabilities = V4L2_OUT_CAP_STD, }, - .subdev_name = VPBE_VENC_SUBDEV_NAME, + .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME, .default_mode = "ntsc", .num_modes = ARRAY_SIZE(dm644xevm_enc_std_timing), .modes = dm644xevm_enc_std_timing, @@ -702,7 +702,7 @@ static struct vpbe_output dm644xevm_vpbe_outputs[] = { .type = V4L2_OUTPUT_TYPE_ANALOG, .capabilities = V4L2_OUT_CAP_DV_TIMINGS, }, - .subdev_name = VPBE_VENC_SUBDEV_NAME, + .subdev_name = DM644X_VPBE_VENC_SUBDEV_NAME, .default_mode = "480p59_94", .num_modes = ARRAY_SIZE(dm644xevm_enc_preset_timing), .modes = dm644xevm_enc_preset_timing, @@ -713,10 +713,10 @@ static struct vpbe_config dm644xevm_display_cfg = { .module_name = "dm644x-vpbe-display", .i2c_adapter_id = 1, .osd = { - .module_name = VPBE_OSD_SUBDEV_NAME, + .module_name = DM644X_VPBE_OSD_SUBDEV_NAME, }, .venc = { - .module_name = VPBE_VENC_SUBDEV_NAME, + .module_name = DM644X_VPBE_VENC_SUBDEV_NAME, }, .num_outputs = ARRAY_SIZE(dm644xevm_vpbe_outputs), .outputs = dm644xevm_vpbe_outputs, @@ -825,7 +825,7 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") .atag_offset = 0x100, .map_io = davinci_evm_map_io, .init_irq = davinci_irq_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = davinci_evm_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 6e2f163..de7adff 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -818,7 +818,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") .atag_offset = 0x100, .map_io = davinci_map_io, .init_irq = davinci_irq_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = evm_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, @@ -829,7 +829,7 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") .atag_offset = 0x100, .map_io = davinci_map_io, .init_irq = davinci_irq_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = evm_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 43e4a0d..9549d53 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -529,8 +529,13 @@ static void __init mityomapl138_init(void) mityomapl138_setup_nand(); - ret = da8xx_register_spi(1, mityomapl138_spi_flash_info, - ARRAY_SIZE(mityomapl138_spi_flash_info)); + ret = spi_register_board_info(mityomapl138_spi_flash_info, + ARRAY_SIZE(mityomapl138_spi_flash_info)); + if (ret) + pr_warn("spi info registration failed: %d\n", ret); + + ret = da8xx_register_spi_bus(1, + ARRAY_SIZE(mityomapl138_spi_flash_info)); if (ret) pr_warning("spi 1 registration failed: %d\n", ret); @@ -570,7 +575,7 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808") .atag_offset = 0x100, .map_io = mityomapl138_map_io, .init_irq = cp_intc_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = mityomapl138_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 3e3e3af..1c98107 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -237,7 +237,7 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2") .atag_offset = 0x100, .map_io = davinci_ntosd2_map_io, .init_irq = davinci_irq_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = davinci_ntosd2_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index dc1208e..5a2bd44 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -48,8 +48,7 @@ static __init void omapl138_hawk_config_emac(void) val &= ~BIT(8); ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins); if (ret) { - pr_warning("%s: cpgmac/mii mux setup failed: %d\n", - __func__, ret); + pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret); return; } @@ -61,8 +60,7 @@ static __init void omapl138_hawk_config_emac(void) ret = da8xx_register_emac(); if (ret) - pr_warning("%s: emac registration failed: %d\n", - __func__, ret); + pr_warn("%s: EMAC registration failed: %d\n", __func__, ret); } /* @@ -147,15 +145,14 @@ static __init void omapl138_hawk_mmc_init(void) ret = davinci_cfg_reg_list(hawk_mmcsd0_pins); if (ret) { - pr_warning("%s: MMC/SD0 mux setup failed: %d\n", - __func__, ret); + pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret); return; } ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN, GPIOF_DIR_IN, "MMC CD"); if (ret < 0) { - pr_warning("%s: can not open GPIO %d\n", + pr_warn("%s: can not open GPIO %d\n", __func__, DA850_HAWK_MMCSD_CD_PIN); return; } @@ -163,15 +160,14 @@ static __init void omapl138_hawk_mmc_init(void) ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN, GPIOF_DIR_IN, "MMC WP"); if (ret < 0) { - pr_warning("%s: can not open GPIO %d\n", + pr_warn("%s: can not open GPIO %d\n", __func__, DA850_HAWK_MMCSD_WP_PIN); goto mmc_setup_wp_fail; } ret = da8xx_register_mmcsd0(&da850_mmc_config); if (ret) { - pr_warning("%s: MMC/SD0 registration failed: %d\n", - __func__, ret); + pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret); goto mmc_setup_mmcsd_fail; } @@ -250,8 +246,7 @@ static __init void omapl138_hawk_usb_init(void) ret = davinci_cfg_reg_list(da850_hawk_usb11_pins); if (ret) { - pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", - __func__, ret); + pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret); return; } @@ -280,8 +275,7 @@ static __init void omapl138_hawk_usb_init(void) ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); if (ret) { - pr_warning("%s: USB 1.1 registration failed: %d\n", - __func__, ret); + pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret); goto usb11_setup_fail; } @@ -307,8 +301,7 @@ static __init void omapl138_hawk_init(void) ret = da850_register_edma(da850_edma_rsv); if (ret) - pr_warning("%s: EDMA registration failed: %d\n", - __func__, ret); + pr_warn("%s: EDMA registration failed: %d\n", __func__, ret); omapl138_hawk_mmc_init(); @@ -316,9 +309,8 @@ static __init void omapl138_hawk_init(void) ret = da8xx_register_watchdog(); if (ret) - pr_warning("omapl138_hawk_init: " - "watchdog registration failed: %d\n", - ret); + pr_warn("%s: watchdog registration failed: %d\n", + __func__, ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -341,7 +333,7 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") .atag_offset = 0x100, .map_io = omapl138_hawk_map_io, .init_irq = cp_intc_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = omapl138_hawk_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 6957787..739be7e 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -155,7 +155,7 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR") .atag_offset = 0x100, .map_io = davinci_sffsdr_map_io, .init_irq = davinci_irq_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = davinci_sffsdr_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index be30997..4f41602 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -280,7 +280,7 @@ MACHINE_START(TNETV107X, "TNETV107X EVM") .atag_offset = 0x100, .map_io = tnetv107x_init, .init_irq = cp_intc_init, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = tnetv107x_evm_board_init, .init_late = davinci_init_late, .dma_zone_size = SZ_128M, diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 34668ea..d458558 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -52,6 +52,40 @@ static void __clk_disable(struct clk *clk) __clk_disable(clk->parent); } +int davinci_clk_reset(struct clk *clk, bool reset) +{ + unsigned long flags; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + spin_lock_irqsave(&clockfw_lock, flags); + if (clk->flags & CLK_PSC) + davinci_psc_reset(clk->gpsc, clk->lpsc, reset); + spin_unlock_irqrestore(&clockfw_lock, flags); + + return 0; +} +EXPORT_SYMBOL(davinci_clk_reset); + +int davinci_clk_reset_assert(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk) || !clk->reset) + return -EINVAL; + + return clk->reset(clk, true); +} +EXPORT_SYMBOL(davinci_clk_reset_assert); + +int davinci_clk_reset_deassert(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk) || !clk->reset) + return -EINVAL; + + return clk->reset(clk, false); +} +EXPORT_SYMBOL(davinci_clk_reset_deassert); + int clk_enable(struct clk *clk) { unsigned long flags; @@ -535,7 +569,7 @@ int davinci_set_refclk_rate(unsigned long rate) } int __init davinci_clk_init(struct clk_lookup *clocks) - { +{ struct clk_lookup *c; struct clk *clk; size_t num_clocks = 0; @@ -576,6 +610,9 @@ int __init davinci_clk_init(struct clk_lookup *clocks) if (clk->lpsc) clk->flags |= CLK_PSC; + if (clk->flags & PSC_LRST) + clk->reset = davinci_clk_reset; + clk_register(clk); num_clocks++; diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 46f0f1b..8694b39 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -103,6 +103,7 @@ struct clk { unsigned long (*recalc) (struct clk *); int (*set_rate) (struct clk *clk, unsigned long rate); int (*round_rate) (struct clk *clk, unsigned long rate); + int (*reset) (struct clk *clk, bool reset); }; /* Clock flags: SoC-specific flags start at BIT(16) */ @@ -112,6 +113,7 @@ struct clk { #define PRE_PLL BIT(4) /* source is before PLL mult/div */ #define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */ #define PSC_FORCE BIT(6) /* Force module state transtition */ +#define PSC_LRST BIT(8) /* Use local reset on enable/disable */ #define CLK(dev, con, ck) \ { \ @@ -126,6 +128,7 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate); int davinci_set_refclk_rate(unsigned long rate); int davinci_simple_set_rate(struct clk *clk, unsigned long rate); +int davinci_clk_reset(struct clk *clk, bool reset); extern struct platform_device davinci_wdt_device; extern void davinci_watchdog_reset(struct platform_device *); diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index 9107691..5ac9e93 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -25,35 +25,44 @@ #define DAVINCI_CPUIDLE_MAX_STATES 2 -struct davinci_ops { - void (*enter) (u32 flags); - void (*exit) (u32 flags); - u32 flags; -}; +static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); +static void __iomem *ddr2_reg_base; +static bool ddr2_pdown; + +static void davinci_save_ddr_power(int enter, bool pdown) +{ + u32 val; + + val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET); + + if (enter) { + if (pdown) + val |= DDR2_SRPD_BIT; + else + val &= ~DDR2_SRPD_BIT; + val |= DDR2_LPMODEN_BIT; + } else { + val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT); + } + + __raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET); +} /* Actual code that puts the SoC in different idle states */ static int davinci_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; - struct davinci_ops *ops = cpuidle_get_statedata(state_usage); - - if (ops && ops->enter) - ops->enter(ops->flags); + davinci_save_ddr_power(1, ddr2_pdown); index = cpuidle_wrap_enter(dev, drv, index, arm_cpuidle_simple_enter); - if (ops && ops->exit) - ops->exit(ops->flags); + davinci_save_ddr_power(0, ddr2_pdown); return index; } -/* fields in davinci_ops.flags */ -#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0) - static struct cpuidle_driver davinci_idle_driver = { .name = "cpuidle-davinci", .owner = THIS_MODULE, @@ -70,45 +79,6 @@ static struct cpuidle_driver davinci_idle_driver = { .state_count = DAVINCI_CPUIDLE_MAX_STATES, }; -static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); -static void __iomem *ddr2_reg_base; - -static void davinci_save_ddr_power(int enter, bool pdown) -{ - u32 val; - - val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET); - - if (enter) { - if (pdown) - val |= DDR2_SRPD_BIT; - else - val &= ~DDR2_SRPD_BIT; - val |= DDR2_LPMODEN_BIT; - } else { - val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT); - } - - __raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET); -} - -static void davinci_c2state_enter(u32 flags) -{ - davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN)); -} - -static void davinci_c2state_exit(u32 flags) -{ - davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN)); -} - -static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = { - [1] = { - .enter = davinci_c2state_enter, - .exit = davinci_c2state_exit, - }, -}; - static int __init davinci_cpuidle_probe(struct platform_device *pdev) { int ret; @@ -124,11 +94,7 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) ddr2_reg_base = pdata->ddr2_ctlr_base; - if (pdata->ddr2_pdown) - davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN; - cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]); - - device->state_count = DAVINCI_CPUIDLE_MAX_STATES; + ddr2_pdown = pdata->ddr2_pdown; ret = cpuidle_register_driver(&davinci_idle_driver); if (ret) { diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 6b9154e..0c4a26d 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -76,6 +76,13 @@ static struct clk pll0_aux_clk = { .flags = CLK_PLL | PRE_PLL, }; +static struct clk pll0_sysclk1 = { + .name = "pll0_sysclk1", + .parent = &pll0_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + static struct clk pll0_sysclk2 = { .name = "pll0_sysclk2", .parent = &pll0_clk, @@ -368,10 +375,19 @@ static struct clk sata_clk = { .flags = PSC_FORCE, }; +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll0_sysclk1, + .domain = DAVINCI_GPSC_DSPDOMAIN, + .lpsc = DA8XX_LPSC0_GEM, + .flags = PSC_LRST | PSC_FORCE, +}; + static struct clk_lookup da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), CLK(NULL, "pll0_aux", &pll0_aux_clk), + CLK(NULL, "pll0_sysclk1", &pll0_sysclk1), CLK(NULL, "pll0_sysclk2", &pll0_sysclk2), CLK(NULL, "pll0_sysclk3", &pll0_sysclk3), CLK(NULL, "pll0_sysclk4", &pll0_sysclk4), @@ -413,6 +429,7 @@ static struct clk_lookup da850_clks[] = { CLK("spi_davinci.1", NULL, &spi1_clk), CLK("vpif", NULL, &vpif_clk), CLK("ahci", NULL, &sata_clk), + CLK("davinci-rproc.0", NULL, &dsp_clk), CLK(NULL, NULL, NULL), }; diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index 37c27af..6b7a0a2 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -37,11 +37,18 @@ static void __init da8xx_init_irq(void) of_irq_init(da8xx_irq_match); } +struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL), + OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL), + {} +}; + #ifdef CONFIG_ARCH_DAVINCI_DA850 static void __init da850_init_machine(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, + da850_auxdata_lookup, NULL); da8xx_uart_clk_enable(); } @@ -56,7 +63,7 @@ static const char *da850_boards_compat[] __initdata = { DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x") .map_io = da850_init, .init_irq = da8xx_init_irq, - .timer = &davinci_timer, + .init_time = davinci_timer_init, .init_machine = da850_init_machine, .dt_compat = da850_boards_compat, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 2d5502d..fc50243 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -359,7 +359,7 @@ static struct resource da8xx_watchdog_resources[] = { }, }; -struct platform_device da8xx_wdt_device = { +static struct platform_device da8xx_wdt_device = { .name = "watchdog", .id = -1, .num_resources = ARRAY_SIZE(da8xx_watchdog_resources), @@ -368,7 +368,15 @@ struct platform_device da8xx_wdt_device = { void da8xx_restart(char mode, const char *cmd) { - davinci_watchdog_reset(&da8xx_wdt_device); + struct device *dev; + + dev = bus_find_device_by_name(&platform_bus_type, NULL, "watchdog"); + if (!dev) { + pr_err("%s: failed to find watchdog device\n", __func__); + return; + } + + davinci_watchdog_reset(to_platform_device(dev)); } int __init da8xx_register_watchdog(void) @@ -751,7 +759,7 @@ void __iomem * __init da8xx_get_mem_ctlr(void) da8xx_ddr2_ctlr_base = ioremap(DA8XX_DDR2_CTL_BASE, SZ_32K); if (!da8xx_ddr2_ctlr_base) - pr_warning("%s: Unable to map DDR2 controller", __func__); + pr_warn("%s: Unable to map DDR2 controller", __func__); return da8xx_ddr2_ctlr_base; } @@ -832,7 +840,7 @@ static struct resource da8xx_spi1_resources[] = { }, }; -struct davinci_spi_platform_data da8xx_spi_pdata[] = { +static struct davinci_spi_platform_data da8xx_spi_pdata[] = { [0] = { .version = SPI_VERSION_2, .intr_line = 1, @@ -866,20 +874,12 @@ static struct platform_device da8xx_spi_device[] = { }, }; -int __init da8xx_register_spi(int instance, const struct spi_board_info *info, - unsigned len) +int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect) { - int ret; - if (instance < 0 || instance > 1) return -EINVAL; - ret = spi_register_board_info(info, len); - if (ret) - pr_warning("%s: failed to register board info for spi %d :" - " %d\n", __func__, instance, ret); - - da8xx_spi_pdata[instance].num_chipselect = len; + da8xx_spi_pdata[instance].num_chipselect = num_chipselect; if (instance == 1 && cpu_is_davinci_da850()) { da8xx_spi1_resources[0].start = DA850_SPI1_BASE; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 11c79a3..db1dd92 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -669,19 +669,14 @@ static struct resource dm644x_osd_resources[] = { }, }; -static struct osd_platform_data dm644x_osd_data = { - .vpbe_type = VPBE_VERSION_1, -}; - static struct platform_device dm644x_osd_dev = { - .name = VPBE_OSD_SUBDEV_NAME, + .name = DM644X_VPBE_OSD_SUBDEV_NAME, .id = -1, .num_resources = ARRAY_SIZE(dm644x_osd_resources), .resource = dm644x_osd_resources, .dev = { .dma_mask = &dm644x_video_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dm644x_osd_data, }, }; @@ -751,12 +746,11 @@ static struct platform_device dm644x_vpbe_display = { }; static struct venc_platform_data dm644x_venc_pdata = { - .venc_type = VPBE_VERSION_1, .setup_clock = dm644x_venc_setup_clock, }; static struct platform_device dm644x_venc_dev = { - .name = VPBE_VENC_SUBDEV_NAME, + .name = DM644X_VPBE_VENC_SUBDEV_NAME, .id = -1, .num_resources = ARRAY_SIZE(dm644x_venc_resources), .resource = dm644x_venc_resources, diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h index a3b0402..3e8af6a 100644 --- a/arch/arm/mach-davinci/include/mach/clock.h +++ b/arch/arm/mach-davinci/include/mach/clock.h @@ -18,4 +18,7 @@ struct clk; extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); +int davinci_clk_reset_assert(struct clk *c); +int davinci_clk_reset_deassert(struct clk *c); + #endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 046c723..b124b77 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -15,9 +15,7 @@ #include <linux/compiler.h> #include <linux/types.h> -struct sys_timer; - -extern struct sys_timer davinci_timer; +extern void davinci_timer_init(void); extern void davinci_irq_init(void); extern void __iomem *davinci_intc_base; diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 700d311..de439b7 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -82,8 +82,7 @@ void __init da850_init(void); int da830_register_edma(struct edma_rsv_info *rsv); int da850_register_edma(struct edma_rsv_info *rsv[2]); int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); -int da8xx_register_spi(int instance, - const struct spi_board_info *info, unsigned len); +int da8xx_register_spi_bus(int instance, unsigned num_chipselect); int da8xx_register_watchdog(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); @@ -110,9 +109,7 @@ extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata; extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata; -extern struct davinci_spi_platform_data da8xx_spi_pdata[]; -extern struct platform_device da8xx_wdt_device; extern const short da830_emif25_pins[]; extern const short da830_spi0_pins[]; diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 40a0027..0a22710 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -246,6 +246,7 @@ #define MDSTAT_STATE_MASK 0x3f #define PDSTAT_STATE_MASK 0x1f +#define MDCTL_LRST BIT(8) #define MDCTL_FORCE BIT(31) #define PDCTL_NEXT BIT(0) #define PDCTL_EPCGOOD BIT(8) @@ -253,6 +254,8 @@ #ifndef __ASSEMBLER__ extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); +extern void davinci_psc_reset(unsigned int ctlr, unsigned int id, + bool reset); extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, bool enable, u32 flags); diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 3a0ff90..f49c2916 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -101,4 +101,3 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } #define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index d7e210f..82fdc69 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -35,7 +35,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) struct davinci_soc_info *soc_info = &davinci_soc_info; if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { - pr_warning("PSC: Bad psc data: 0x%x[%d]\n", + pr_warn("PSC: Bad psc data: 0x%x[%d]\n", (int)soc_info->psc_bases, ctlr); return 0; } @@ -48,6 +48,31 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) return mdstat & BIT(12); } +/* Control "reset" line associated with PSC domain */ +void davinci_psc_reset(unsigned int ctlr, unsigned int id, bool reset) +{ + u32 mdctl; + void __iomem *psc_base; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { + pr_warn("PSC: Bad psc data: 0x%x[%d]\n", + (int)soc_info->psc_bases, ctlr); + return; + } + + psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K); + + mdctl = readl(psc_base + MDCTL + 4 * id); + if (reset) + mdctl &= ~MDCTL_LRST; + else + mdctl |= MDCTL_LRST; + writel(mdctl, psc_base + MDCTL + 4 * id); + + iounmap(psc_base); +} + /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, bool enable, u32 flags) @@ -58,7 +83,7 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, u32 next_state = PSC_STATE_ENABLE; if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { - pr_warning("PSC: Bad psc data: 0x%x[%d]\n", + pr_warn("PSC: Bad psc data: 0x%x[%d]\n", (int)soc_info->psc_bases, ctlr); return; } diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 9847938..bad361e 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -337,7 +337,7 @@ static struct clock_event_device clockevent_davinci = { }; -static void __init davinci_timer_init(void) +void __init davinci_timer_init(void) { struct clk *timer_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; @@ -410,11 +410,6 @@ static void __init davinci_timer_init(void) timer32_config(&timers[i]); } -struct sys_timer davinci_timer = { - .init = davinci_timer_init, -}; - - /* reset board using watchdog timer */ void davinci_watchdog_reset(struct platform_device *pdev) { diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c index 792b4e2..0dc39cf 100644 --- a/arch/arm/mach-dove/cm-a510.c +++ b/arch/arm/mach-dove/cm-a510.c @@ -92,6 +92,6 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board") .map_io = dove_map_io, .init_early = dove_init_early, .init_irq = dove_init_irq, - .timer = &dove_timer, + .init_time = dove_timer_init, .restart = dove_restart, MACHINE_END diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 89f4f99..ea84c535 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -8,35 +8,24 @@ * warranty of any kind, whether express or implied. */ -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> #include <linux/clk-provider.h> #include <linux/clk/mvebu.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> #include <linux/of.h> #include <linux/of_platform.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/timex.h> +#include <linux/platform_data/dma-mv_xor.h> +#include <linux/platform_data/usb-ehci-orion.h> +#include <linux/platform_device.h> #include <asm/hardware/cache-tauros2.h> +#include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/mach/pci.h> -#include <mach/dove.h> -#include <mach/pm.h> #include <mach/bridge-regs.h> -#include <asm/mach/arch.h> -#include <linux/irq.h> -#include <plat/time.h> -#include <linux/platform_data/usb-ehci-orion.h> -#include <linux/platform_data/dma-mv_xor.h> -#include <plat/irq.h> +#include <mach/pm.h> #include <plat/common.h> -#include <plat/addr-map.h> +#include <plat/irq.h> +#include <plat/time.h> #include "common.h" /***************************************************************************** @@ -242,17 +231,13 @@ static int __init dove_find_tclk(void) return 166666667; } -static void __init dove_timer_init(void) +void __init dove_timer_init(void) { dove_tclk = dove_find_tclk(); orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_DOVE_BRIDGE, dove_tclk); } -struct sys_timer dove_timer = { - .init = dove_timer_init, -}; - /***************************************************************************** * Cryptographic Engines and Security Accelerator (CESA) ****************************************************************************/ @@ -454,7 +439,7 @@ DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") .map_io = dove_map_io, .init_early = dove_init_early, .init_irq = orion_dt_init_irq, - .timer = &dove_timer, + .init_time = dove_timer_init, .init_machine = dove_dt_init, .restart = dove_restart, .dt_compat = dove_dt_board_compat, diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index 1a23340..ee59fba 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -14,7 +14,7 @@ struct mv643xx_eth_platform_data; struct mv_sata_platform_data; -extern struct sys_timer dove_timer; +extern void dove_timer_init(void); /* * Basic Dove init functions used early by machine-setup. diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c index bc2867f..76e26f9 100644 --- a/arch/arm/mach-dove/dove-db-setup.c +++ b/arch/arm/mach-dove/dove-db-setup.c @@ -98,6 +98,6 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board") .map_io = dove_map_io, .init_early = dove_init_early, .init_irq = dove_init_irq, - .timer = &dove_timer, + .init_time = dove_timer_init, .restart = dove_restart, MACHINE_END diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h index 2c5cdd7..5c8ae9b 100644 --- a/arch/arm/mach-dove/include/mach/uncompress.h +++ b/arch/arm/mach-dove/include/mach/uncompress.h @@ -34,4 +34,3 @@ static void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index f0fe6b5..b13cc74 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -158,7 +158,7 @@ static void __init ebsa110_init_early(void) * interrupt, then the PIT counter will roll over (ie, be negative). * This actually works out to be convenient. */ -static unsigned long ebsa110_gettimeoffset(void) +static u32 ebsa110_gettimeoffset(void) { unsigned long offset, count; @@ -181,7 +181,7 @@ static unsigned long ebsa110_gettimeoffset(void) */ offset = offset * (1000000 / HZ) / COUNT; - return offset; + return offset * 1000; } static irqreturn_t @@ -213,8 +213,10 @@ static struct irqaction ebsa110_timer_irq = { /* * Set up timer interrupt. */ -static void __init ebsa110_timer_init(void) +void __init ebsa110_timer_init(void) { + arch_gettimeoffset = ebsa110_gettimeoffset; + /* * Timer 1, mode 2, LSB/MSB */ @@ -225,11 +227,6 @@ static void __init ebsa110_timer_init(void) setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq); } -static struct sys_timer ebsa110_timer = { - .init = ebsa110_timer_init, - .offset = ebsa110_gettimeoffset, -}; - static struct plat_serial8250_port serial_platform_data[] = { { .iobase = 0x3f8, @@ -328,6 +325,6 @@ MACHINE_START(EBSA110, "EBSA110") .map_io = ebsa110_map_io, .init_early = ebsa110_init_early, .init_irq = ebsa110_init_irq, - .timer = &ebsa110_timer, + .init_time = ebsa110_timer_init, .restart = ebsa110_restart, MACHINE_END diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h index 3204150..ab64bea 100644 --- a/arch/arm/mach-ebsa110/include/mach/uncompress.h +++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h @@ -42,4 +42,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 41383bf..bda6c3a 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -17,7 +17,6 @@ #include <mach/hardware.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,8 +38,7 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = adssphere_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index e85bf17..c49ed3d 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -34,6 +34,7 @@ #include <linux/i2c-gpio.h> #include <linux/spi/spi.h> #include <linux/export.h> +#include <linux/irqchip/arm-vic.h> #include <mach/hardware.h> #include <linux/platform_data/video-ep93xx.h> @@ -44,8 +45,6 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/hardware/vic.h> - #include "soc.h" /************************************************************************* @@ -140,11 +139,29 @@ static struct irqaction ep93xx_timer_irq = { .handler = ep93xx_timer_interrupt, }; -static void __init ep93xx_timer_init(void) +static u32 ep93xx_gettimeoffset(void) +{ + int offset; + + offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time; + + /* + * Timer 4 is based on a 983.04 kHz reference clock, + * so dividing by 983040 gives the fraction of a second, + * so dividing by 0.983040 converts to uS. + * Refactor the calculation to avoid overflow. + * Finally, multiply by 1000 to give nS. + */ + return (offset + (53 * offset / 3072)) * 1000; +} + +void __init ep93xx_timer_init(void) { u32 tmode = EP93XX_TIMER123_CONTROL_MODE | EP93XX_TIMER123_CONTROL_CLKSEL; + arch_gettimeoffset = ep93xx_gettimeoffset; + /* Enable periodic HZ timer. */ __raw_writel(tmode, EP93XX_TIMER1_CONTROL); __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD); @@ -158,21 +175,6 @@ static void __init ep93xx_timer_init(void) setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq); } -static unsigned long ep93xx_gettimeoffset(void) -{ - int offset; - - offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time; - - /* Calculate (1000000 / 983040) * offset. */ - return offset + (53 * offset / 3072); -} - -struct sys_timer ep93xx_timer = { - .init = ep93xx_timer_init, - .offset = ep93xx_gettimeoffset, -}; - /************************************************************************* * EP93xx IRQ handling diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index b8f53d5..27b14ae 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -39,7 +39,6 @@ #include <linux/platform_data/spi-ep93xx.h> #include <mach/gpio-ep93xx.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -276,8 +275,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, @@ -290,8 +288,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, @@ -304,8 +301,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, @@ -318,8 +314,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, @@ -332,8 +327,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, @@ -346,8 +340,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, @@ -360,8 +353,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, @@ -374,8 +366,7 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = edb93xx_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 7fd705b..0cca5b1 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -17,7 +17,6 @@ #include <mach/hardware.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,8 +38,7 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = gesbc9312_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 33a5122..a14e1b3 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -53,7 +53,7 @@ int ep93xx_ide_acquire_gpio(struct platform_device *pdev); void ep93xx_ide_release_gpio(struct platform_device *pdev); void ep93xx_init_devices(void); -extern struct sys_timer ep93xx_timer; +extern void ep93xx_timer_init(void); void ep93xx_restart(char, const char *); void ep93xx_init_late(void); diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index d64274f..d2afb4d 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -86,5 +86,3 @@ static void arch_decomp_setup(void) { ethernet_reset(); } - -#define arch_decomp_wdog() diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 3d7cdab..373583c 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -18,7 +18,6 @@ #include <mach/hardware.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -82,8 +81,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, @@ -96,8 +94,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, @@ -110,8 +107,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, @@ -124,8 +120,7 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = micro9_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 0eb3f17..36f22c1 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -25,7 +25,6 @@ #include <linux/platform_data/video-ep93xx.h> #include <mach/gpio-ep93xx.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -83,8 +82,7 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = simone_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 50043ee..aa86f86 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -31,7 +31,6 @@ #include <linux/platform_data/video-ep93xx.h> #include <mach/gpio-ep93xx.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -176,8 +175,7 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = snappercl15_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 3c4c233..61f4b5d 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -22,7 +22,6 @@ #include <mach/hardware.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> @@ -246,8 +245,7 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") .atag_offset = 0x100, .map_io = ts72xx_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = ts72xx_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index ba92e25..605956f 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -34,7 +34,6 @@ #include <linux/platform_data/spi-ep93xx.h> #include <mach/gpio-ep93xx.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> @@ -364,8 +363,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") .atag_offset = 0x100, .map_io = vision_map_io, .init_irq = ep93xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &ep93xx_timer, + .init_time = ep93xx_timer_init, .init_machine = vision_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 1a89824..d63d399 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/io.h> #include <linux/device.h> #include <linux/gpio.h> @@ -22,12 +23,13 @@ #include <linux/of_irq.h> #include <linux/export.h> #include <linux/irqdomain.h> +#include <linux/irqchip.h> #include <linux/of_address.h> +#include <linux/irqchip/arm-gic.h> #include <asm/proc-fns.h> #include <asm/exception.h> #include <asm/hardware/cache-l2x0.h> -#include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/cacheflush.h> @@ -35,7 +37,6 @@ #include <mach/regs-irq.h> #include <mach/regs-pmu.h> #include <mach/regs-gpio.h> -#include <mach/pmu.h> #include <plat/cpu.h> #include <plat/clock.h> @@ -299,6 +300,7 @@ void exynos4_restart(char mode, const char *cmd) void exynos5_restart(char mode, const char *cmd) { + struct device_node *np; u32 val; void __iomem *addr; @@ -306,8 +308,9 @@ void exynos5_restart(char mode, const char *cmd) val = 0x1; addr = EXYNOS_SWRESET; } else if (of_machine_is_compatible("samsung,exynos5440")) { - val = (0x10 << 20) | (0x1 << 16); - addr = EXYNOS5440_SWRESET; + np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); + addr = of_iomap(np, 0) + 0xcc; + val = (0xfff << 20) | (0x1 << 16); } else { pr_err("%s: cannot support non-DT\n", __func__); return; @@ -438,220 +441,6 @@ static void __init exynos5_init_clocks(int xtal) #endif } -#define COMBINER_ENABLE_SET 0x0 -#define COMBINER_ENABLE_CLEAR 0x4 -#define COMBINER_INT_STATUS 0xC - -static DEFINE_SPINLOCK(irq_controller_lock); - -struct combiner_chip_data { - unsigned int irq_offset; - unsigned int irq_mask; - void __iomem *base; -}; - -static struct irq_domain *combiner_irq_domain; -static struct combiner_chip_data combiner_data[MAX_COMBINER_NR]; - -static inline void __iomem *combiner_base(struct irq_data *data) -{ - struct combiner_chip_data *combiner_data = - irq_data_get_irq_chip_data(data); - - return combiner_data->base; -} - -static void combiner_mask_irq(struct irq_data *data) -{ - u32 mask = 1 << (data->hwirq % 32); - - __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR); -} - -static void combiner_unmask_irq(struct irq_data *data) -{ - u32 mask = 1 << (data->hwirq % 32); - - __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET); -} - -static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) -{ - struct combiner_chip_data *chip_data = irq_get_handler_data(irq); - struct irq_chip *chip = irq_get_chip(irq); - unsigned int cascade_irq, combiner_irq; - unsigned long status; - - chained_irq_enter(chip, desc); - - spin_lock(&irq_controller_lock); - status = __raw_readl(chip_data->base + COMBINER_INT_STATUS); - spin_unlock(&irq_controller_lock); - status &= chip_data->irq_mask; - - if (status == 0) - goto out; - - combiner_irq = __ffs(status); - - cascade_irq = combiner_irq + (chip_data->irq_offset & ~31); - if (unlikely(cascade_irq >= NR_IRQS)) - do_bad_IRQ(cascade_irq, desc); - else - generic_handle_irq(cascade_irq); - - out: - chained_irq_exit(chip, desc); -} - -static struct irq_chip combiner_chip = { - .name = "COMBINER", - .irq_mask = combiner_mask_irq, - .irq_unmask = combiner_unmask_irq, -}; - -static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) -{ - unsigned int max_nr; - - if (soc_is_exynos5250()) - max_nr = EXYNOS5_MAX_COMBINER_NR; - else - max_nr = EXYNOS4_MAX_COMBINER_NR; - - if (combiner_nr >= max_nr) - BUG(); - if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0) - BUG(); - irq_set_chained_handler(irq, combiner_handle_cascade_irq); -} - -static void __init combiner_init_one(unsigned int combiner_nr, - void __iomem *base) -{ - combiner_data[combiner_nr].base = base; - combiner_data[combiner_nr].irq_offset = irq_find_mapping( - combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER); - combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3); - - /* Disable all interrupts */ - __raw_writel(combiner_data[combiner_nr].irq_mask, - base + COMBINER_ENABLE_CLEAR); -} - -#ifdef CONFIG_OF -static int combiner_irq_domain_xlate(struct irq_domain *d, - struct device_node *controller, - const u32 *intspec, unsigned int intsize, - unsigned long *out_hwirq, - unsigned int *out_type) -{ - if (d->of_node != controller) - return -EINVAL; - - if (intsize < 2) - return -EINVAL; - - *out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1]; - *out_type = 0; - - return 0; -} -#else -static int combiner_irq_domain_xlate(struct irq_domain *d, - struct device_node *controller, - const u32 *intspec, unsigned int intsize, - unsigned long *out_hwirq, - unsigned int *out_type) -{ - return -EINVAL; -} -#endif - -static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq); - irq_set_chip_data(irq, &combiner_data[hw >> 3]); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - - return 0; -} - -static struct irq_domain_ops combiner_irq_domain_ops = { - .xlate = combiner_irq_domain_xlate, - .map = combiner_irq_domain_map, -}; - -static void __init combiner_init(void __iomem *combiner_base, - struct device_node *np) -{ - int i, irq, irq_base; - unsigned int max_nr, nr_irq; - - if (np) { - if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) { - pr_warning("%s: number of combiners not specified, " - "setting default as %d.\n", - __func__, EXYNOS4_MAX_COMBINER_NR); - max_nr = EXYNOS4_MAX_COMBINER_NR; - } - } else { - max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR : - EXYNOS4_MAX_COMBINER_NR; - } - nr_irq = max_nr * MAX_IRQ_IN_COMBINER; - - irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0); - if (IS_ERR_VALUE(irq_base)) { - irq_base = COMBINER_IRQ(0, 0); - pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base); - } - - combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0, - &combiner_irq_domain_ops, &combiner_data); - if (WARN_ON(!combiner_irq_domain)) { - pr_warning("%s: irq domain init failed\n", __func__); - return; - } - - for (i = 0; i < max_nr; i++) { - combiner_init_one(i, combiner_base + (i >> 2) * 0x10); - irq = IRQ_SPI(i); -#ifdef CONFIG_OF - if (np) - irq = irq_of_parse_and_map(np, i); -#endif - combiner_cascade_irq(i, irq); - } -} - -#ifdef CONFIG_OF -static int __init combiner_of_init(struct device_node *np, - struct device_node *parent) -{ - void __iomem *combiner_base; - - combiner_base = of_iomap(np, 0); - if (!combiner_base) { - pr_err("%s: failed to map combiner registers\n", __func__); - return -ENXIO; - } - - combiner_init(combiner_base, np); - - return 0; -} - -static const struct of_device_id exynos_dt_irq_match[] = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, - { .compatible = "samsung,exynos4210-combiner", - .data = combiner_of_init, }, - {}, -}; -#endif - void __init exynos4_init_irq(void) { unsigned int gic_bank_offset; @@ -662,7 +451,7 @@ void __init exynos4_init_irq(void) gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL); #ifdef CONFIG_OF else - of_irq_init(exynos_dt_irq_match); + irqchip_init(); #endif if (!of_have_populated_dt()) @@ -679,7 +468,7 @@ void __init exynos4_init_irq(void) void __init exynos5_init_irq(void) { #ifdef CONFIG_OF - of_irq_init(exynos_dt_irq_match); + irqchip_init(); #endif /* * The parameters of s5p_init_irq() are for VIC init. @@ -1031,8 +820,8 @@ static int __init exynos_init_irq_eint(void) * interrupt support code here can be completely removed. */ static const struct of_device_id exynos_pinctrl_ids[] = { - { .compatible = "samsung,pinctrl-exynos4210", }, - { .compatible = "samsung,pinctrl-exynos4x12", }, + { .compatible = "samsung,exynos4210-pinctrl", }, + { .compatible = "samsung,exynos4x12-pinctrl", }, }; struct device_node *pctrl_np, *wkup_np; const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 04744f9..9339bb8 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -12,7 +12,7 @@ #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H #define __ARCH_ARM_MACH_EXYNOS_COMMON_H -extern struct sys_timer exynos4_timer; +extern void exynos4_timer_init(void); struct map_desc; void exynos_init_io(struct map_desc *mach_desc, int size); @@ -60,8 +60,31 @@ void exynos4212_register_clocks(void); #define exynos4212_register_clocks() #endif +struct device_node; +void combiner_init(void __iomem *combiner_base, struct device_node *np); + extern struct smp_operations exynos_smp_ops; extern void exynos_cpu_die(unsigned int cpu); +/* PMU(Power Management Unit) support */ + +#define PMU_TABLE_END NULL + +enum sys_powerdown { + SYS_AFTR, + SYS_LPA, + SYS_SLEEP, + NUM_SYS_POWERDOWN, +}; + +extern unsigned long l2x0_regs_phys; +struct exynos_pmu_conf { + void __iomem *reg; + unsigned int val[NUM_SYS_POWERDOWN]; +}; + +extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); +extern void s3c_cpu_resume(void); + #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index 0509241..fcfe025 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -23,10 +23,11 @@ #include <asm/cpuidle.h> #include <mach/regs-clock.h> #include <mach/regs-pmu.h> -#include <mach/pmu.h> #include <plat/cpu.h> +#include "common.h" + #define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0)) diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c index 9d1a609..c662c89 100644 --- a/arch/arm/mach-exynos/dev-audio.c +++ b/arch/arm/mach-exynos/dev-audio.c @@ -21,7 +21,8 @@ #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> -#include <mach/regs-audss.h> + +#define EXYNOS4_AUDSS_INT_MEM (0x03000000) static int exynos4_cfg_i2s(struct platform_device *pdev) { diff --git a/arch/arm/mach-exynos/include/mach/cpufreq.h b/arch/arm/mach-exynos/include/mach/cpufreq.h deleted file mode 100644 index 7517c3f..0000000 --- a/arch/arm/mach-exynos/include/mach/cpufreq.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/mach-exynos/include/mach/cpufreq.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - CPUFreq support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -enum cpufreq_level_index { - L0, L1, L2, L3, L4, - L5, L6, L7, L8, L9, - L10, L11, L12, L13, L14, - L15, L16, L17, L18, L19, - L20, -}; - -struct exynos_dvfs_info { - unsigned long mpll_freq_khz; - unsigned int pll_safe_idx; - unsigned int pm_lock_idx; - unsigned int max_support_idx; - unsigned int min_support_idx; - struct clk *cpu_clk; - unsigned int *volt_table; - struct cpufreq_frequency_table *freq_table; - void (*set_freq)(unsigned int, unsigned int); - bool (*need_apll_change)(unsigned int, unsigned int); -}; - -extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *); -extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *); -extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *); diff --git a/arch/arm/mach-exynos/include/mach/pmu.h b/arch/arm/mach-exynos/include/mach/pmu.h deleted file mode 100644 index 7c27c2d..0000000 --- a/arch/arm/mach-exynos/include/mach/pmu.h +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/pmu.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * EXYNOS4210 - PMU(Power Management Unit) support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PMU_H -#define __ASM_ARCH_PMU_H __FILE__ - -#define PMU_TABLE_END NULL - -enum sys_powerdown { - SYS_AFTR, - SYS_LPA, - SYS_SLEEP, - NUM_SYS_POWERDOWN, -}; - -extern unsigned long l2x0_regs_phys; -struct exynos_pmu_conf { - void __iomem *reg; - unsigned int val[NUM_SYS_POWERDOWN]; -}; - -extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); -extern void s3c_cpu_resume(void); - -#endif /* __ASM_ARCH_PMU_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-audss.h b/arch/arm/mach-exynos/include/mach/regs-audss.h deleted file mode 100644 index ca5a8b6..0000000 --- a/arch/arm/mach-exynos/include/mach/regs-audss.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-exynos4/include/mach/regs-audss.h - * - * Copyright (c) 2011 Samsung Electronics - * http://www.samsung.com - * - * Exynos4 Audio SubSystem clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_AUDSS_H -#define __PLAT_REGS_AUDSS_H __FILE__ - -#define EXYNOS4_AUDSS_INT_MEM (0x03000000) - -#endif /* _PLAT_REGS_AUDSS_H */ diff --git a/arch/arm/mach-exynos/include/mach/regs-irq.h b/arch/arm/mach-exynos/include/mach/regs-irq.h index 9c7b4bf..f2b5050 100644 --- a/arch/arm/mach-exynos/include/mach/regs-irq.h +++ b/arch/arm/mach-exynos/include/mach/regs-irq.h @@ -13,7 +13,7 @@ #ifndef __ASM_ARCH_REGS_IRQ_H #define __ASM_ARCH_REGS_IRQ_H __FILE__ -#include <asm/hardware/gic.h> +#include <linux/irqchip/arm-gic.h> #include <mach/map.h> #endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c index b938f9f..685f291 100644 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ b/arch/arm/mach-exynos/mach-armlex4210.c @@ -16,7 +16,6 @@ #include <linux/smsc911x.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <plat/cpu.h> @@ -201,9 +200,8 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = armlex4210_map_io, - .handle_irq = gic_handle_irq, .init_machine = armlex4210_machine_init, .init_late = exynos_init_late, - .timer = &exynos4_timer, + .init_time = exynos4_timer_init, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index ac09af8..3358088 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -15,7 +15,6 @@ #include <linux/serial_core.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <mach/map.h> #include <plat/cpu.h> @@ -141,10 +140,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = exynos4_dt_map_io, - .handle_irq = gic_handle_irq, .init_machine = exynos4_dt_machine_init, .init_late = exynos_init_late, - .timer = &exynos4_timer, + .init_time = exynos4_timer_init, .dt_compat = exynos4_dt_compat, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 2671075..acaeb14 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -16,7 +16,6 @@ #include <linux/io.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <mach/map.h> #include <mach/regs-pmu.h> @@ -104,6 +103,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL), OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000, "exynos-tmu", NULL), + OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000, + "samsung-i2s.0", NULL), + OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000, + "samsung-i2s.1", NULL), + OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000, + "samsung-i2s.2", NULL), OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11210000, "exynos-sysmmu.0", "mfc"), /* MFC_L */ OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11200000, @@ -209,10 +214,9 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") .init_irq = exynos5_init_irq, .smp = smp_ops(exynos_smp_ops), .map_io = exynos5_dt_map_io, - .handle_irq = gic_handle_irq, .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, - .timer = &exynos4_timer, + .init_time = exynos4_timer_init, .dt_compat = exynos5_dt_compat, .restart = exynos5_restart, .reserve = exynos5_reserve, diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 27d4ed8..1ea7973 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -39,7 +39,6 @@ #include <media/v4l2-mediabus.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <plat/adc.h> @@ -1209,25 +1208,25 @@ static struct i2c_board_info m5mols_board_info = { .platform_data = &m5mols_platdata, }; -static struct s5p_fimc_isp_info nuri_camera_sensors[] = { +static struct fimc_source_info nuri_camera_sensors[] = { { .flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_ITU_601, + .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, .board_info = &s5k6aa_board_info, .clk_frequency = 24000000UL, .i2c_bus_num = 6, }, { .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_MIPI_CSI2, + .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2, .board_info = &m5mols_board_info, .clk_frequency = 24000000UL, }, }; static struct s5p_platform_fimc fimc_md_platdata = { - .isp_info = nuri_camera_sensors, + .source_info = nuri_camera_sensors, .num_clients = ARRAY_SIZE(nuri_camera_sensors), }; @@ -1379,10 +1378,9 @@ MACHINE_START(NURI, "NURI") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = nuri_map_io, - .handle_irq = gic_handle_irq, .init_machine = nuri_machine_init, .init_late = exynos_init_late, - .timer = &exynos4_timer, + .init_time = exynos4_timer_init, .reserve = &nuri_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5e34b9c..579d2d1 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -29,7 +29,6 @@ #include <linux/platform_data/usb-exynos.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <video/platform_lcd.h> @@ -814,10 +813,9 @@ MACHINE_START(ORIGEN, "ORIGEN") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = origen_map_io, - .handle_irq = gic_handle_irq, .init_machine = origen_machine_init, .init_late = exynos_init_late, - .timer = &exynos4_timer, + .init_time = exynos4_timer_init, .reserve = &origen_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index ae6da40..fe61496 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -25,7 +25,6 @@ #include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <video/samsung_fimd.h> @@ -376,9 +375,8 @@ MACHINE_START(SMDK4212, "SMDK4212") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = smdk4x12_map_io, - .handle_irq = gic_handle_irq, .init_machine = smdk4x12_machine_init, - .timer = &exynos4_timer, + .init_time = exynos4_timer_init, .restart = exynos4_restart, .reserve = &smdk4x12_reserve, MACHINE_END @@ -390,10 +388,9 @@ MACHINE_START(SMDK4412, "SMDK4412") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = smdk4x12_map_io, - .handle_irq = gic_handle_irq, .init_machine = smdk4x12_machine_init, .init_late = exynos_init_late, - .timer = &exynos4_timer, + .init_time = exynos4_timer_init, .restart = exynos4_restart, .reserve = &smdk4x12_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 35548e3..d716729 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -26,7 +26,6 @@ #include <linux/platform_data/usb-exynos.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <video/platform_lcd.h> @@ -423,9 +422,8 @@ MACHINE_START(SMDKV310, "SMDKV310") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, - .handle_irq = gic_handle_irq, .init_machine = smdkv310_machine_init, - .timer = &exynos4_timer, + .init_time = exynos4_timer_init, .reserve = &smdkv310_reserve, .restart = exynos4_restart, MACHINE_END @@ -436,10 +434,9 @@ MACHINE_START(SMDKC210, "SMDKC210") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, - .handle_irq = gic_handle_irq, .init_machine = smdkv310_machine_init, .init_late = exynos_init_late, - .timer = &exynos4_timer, + .init_time = exynos4_timer_init, .reserve = &smdkv310_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 9e3340f..497fcb7 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -29,7 +29,6 @@ #include <drm/exynos_drm.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <video/samsung_fimd.h> @@ -988,12 +987,12 @@ static struct i2c_board_info m5mols_board_info = { .platform_data = &m5mols_platdata, }; -static struct s5p_fimc_isp_info universal_camera_sensors[] = { +static struct fimc_source_info universal_camera_sensors[] = { { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_ITU_601, + .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, .board_info = &s5k6aa_board_info, .i2c_bus_num = 0, .clk_frequency = 24000000UL, @@ -1001,7 +1000,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_MIPI_CSI2, + .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2, .board_info = &m5mols_board_info, .i2c_bus_num = 0, .clk_frequency = 24000000UL, @@ -1009,7 +1008,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { }; static struct s5p_platform_fimc fimc_md_platdata = { - .isp_info = universal_camera_sensors, + .source_info = universal_camera_sensors, .num_clients = ARRAY_SIZE(universal_camera_sensors), }; @@ -1151,10 +1150,9 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = universal_map_io, - .handle_irq = gic_handle_irq, .init_machine = universal_machine_init, .init_late = exynos_init_late, - .timer = &s5p_timer, + .init_time = s5p_timer_init, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 57668eb..c9d6650 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -22,7 +22,6 @@ #include <linux/of.h> #include <asm/arch_timer.h> -#include <asm/hardware/gic.h> #include <asm/localtimer.h> #include <plat/cpu.h> @@ -255,13 +254,9 @@ static struct irqaction mct_comp_event_irq = { static void exynos4_clockevent_init(void) { - clockevents_calc_mult_shift(&mct_comp_device, clk_rate, 5); - mct_comp_device.max_delta_ns = - clockevent_delta2ns(0xffffffff, &mct_comp_device); - mct_comp_device.min_delta_ns = - clockevent_delta2ns(0xf, &mct_comp_device); mct_comp_device.cpumask = cpumask_of(0); - clockevents_register_device(&mct_comp_device); + clockevents_config_and_register(&mct_comp_device, clk_rate, + 0xf, 0xffffffff); if (soc_is_exynos5250()) setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq); @@ -404,14 +399,8 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) evt->set_mode = exynos4_tick_set_mode; evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; evt->rating = 450; - - clockevents_calc_mult_shift(evt, clk_rate / (TICK_BASE_CNT + 1), 5); - evt->max_delta_ns = - clockevent_delta2ns(0x7fffffff, evt); - evt->min_delta_ns = - clockevent_delta2ns(0xf, evt); - - clockevents_register_device(evt); + clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1), + 0xf, 0x7fffffff); exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET); @@ -478,7 +467,7 @@ static void __init exynos4_timer_resources(void) #endif /* CONFIG_LOCAL_TIMERS */ } -static void __init exynos_timer_init(void) +void __init exynos4_timer_init(void) { if (soc_is_exynos5440()) { arch_timer_of_register(); @@ -494,7 +483,3 @@ static void __init exynos_timer_init(void) exynos4_clocksource_init(); exynos4_clockevent_init(); } - -struct sys_timer exynos4_timer = { - .init = exynos_timer_init, -}; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index c5c840e..60f7c5b 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,9 +20,9 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> -#include <asm/hardware/gic.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> @@ -149,7 +149,7 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct __raw_writel(virt_to_phys(exynos4_secondary_startup), cpu_boot_reg(phys_cpu)); - gic_raise_softirq(cpumask_of(cpu), 0); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); if (pen_release == -1) break; @@ -190,8 +190,6 @@ static void __init exynos_smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index b9b539c..e3faaa81 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -34,7 +34,8 @@ #include <mach/regs-clock.h> #include <mach/regs-pmu.h> #include <mach/pm-core.h> -#include <mach/pmu.h> + +#include "common.h" static struct sleep_save exynos4_set_clksrc[] = { { .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, }, @@ -91,8 +92,8 @@ static int exynos_cpu_suspend(unsigned long arg) /* issue the standby signal into the pm unit. */ cpu_do_idle(); - /* we should never get past here */ - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } static void exynos_pm_prepare(void) @@ -282,6 +283,8 @@ static void exynos_pm_resume(void) if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { tmp |= S5P_CENTRAL_LOWPWR_CFG; __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + /* clear the wakeup state register */ + __raw_writel(0x0, S5P_WAKEUP_STAT); /* No need to perform below restore code */ goto early_wakeup; } diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index 3a48c85..daebc1a 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -14,7 +14,8 @@ #include <linux/bug.h> #include <mach/regs-clock.h> -#include <mach/pmu.h> + +#include "common.h" static struct exynos_pmu_conf *exynos_pmu_config; diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index 25b4536..6987a09 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -90,6 +90,6 @@ MACHINE_START(CATS, "Chalice-CATS") .fixup = fixup_cats, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, - .timer = &isa_timer, + .init_time = isa_timer_init, .restart = footbridge_restart, MACHINE_END diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h index c9767b8..a846e50 100644 --- a/arch/arm/mach-footbridge/common.h +++ b/arch/arm/mach-footbridge/common.h @@ -1,6 +1,6 @@ -extern struct sys_timer footbridge_timer; -extern struct sys_timer isa_timer; +extern void footbridge_timer_init(void); +extern void isa_timer_init(void); extern void isa_rtc_init(void); diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 3b54196..9ee78f7 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -93,7 +93,7 @@ static struct irqaction footbridge_timer_irq = { /* * Set up timer interrupt. */ -static void __init footbridge_timer_init(void) +void __init footbridge_timer_init(void) { struct clock_event_device *ce = &ckevt_dc21285; @@ -101,14 +101,6 @@ static void __init footbridge_timer_init(void) setup_irq(ce->irq, &footbridge_timer_irq); - clockevents_calc_mult_shift(ce, mem_fclk_21285, 5); - ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce); - ce->min_delta_ns = clockevent_delta2ns(0x000004, ce); ce->cpumask = cpumask_of(smp_processor_id()); - - clockevents_register_device(ce); + clockevents_config_and_register(ce, mem_fclk_21285, 0x4, 0xffffff); } - -struct sys_timer footbridge_timer = { - .init = footbridge_timer_init, -}; diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index b09551e..b082435 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -101,7 +101,7 @@ MACHINE_START(EBSA285, "EBSA285") .video_end = 0x000bffff, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, - .timer = &footbridge_timer, + .init_time = footbridge_timer_init, .restart = footbridge_restart, MACHINE_END diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h index 5dfa442..a69398c 100644 --- a/arch/arm/mach-footbridge/include/mach/uncompress.h +++ b/arch/arm/mach-footbridge/include/mach/uncompress.h @@ -35,4 +35,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index c40bb41..d9301dd 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -31,14 +31,10 @@ static struct irqaction pit_timer_irq = { .dev_id = &i8253_clockevent, }; -static void __init isa_timer_init(void) +void __init isa_timer_init(void) { clocksource_i8253_init(); setup_irq(i8253_clockevent.irq, &pit_timer_irq); clockevent_i8253_init(false); } - -struct sys_timer isa_timer = { - .init = isa_timer_init, -}; diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index d2d1433..90ea23f 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -766,6 +766,6 @@ MACHINE_START(NETWINDER, "Rebel-NetWinder") .fixup = fixup_netwinder, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, - .timer = &isa_timer, + .init_time = isa_timer_init, .restart = netwinder_restart, MACHINE_END diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c index e1e9990..7bdeabd 100644 --- a/arch/arm/mach-footbridge/personal.c +++ b/arch/arm/mach-footbridge/personal.c @@ -18,7 +18,7 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") .atag_offset = 0x100, .map_io = footbridge_map_io, .init_irq = footbridge_init_irq, - .timer = &footbridge_timer, + .init_time = footbridge_timer_init, .restart = footbridge_restart, MACHINE_END diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c index 5927d3c..08bd650 100644 --- a/arch/arm/mach-gemini/board-nas4220b.c +++ b/arch/arm/mach-gemini/board-nas4220b.c @@ -31,10 +31,6 @@ #include "common.h" -static struct sys_timer ib4220b_timer = { - .init = gemini_timer_init, -}; - static struct gpio_led ib4220b_leds[] = { { .name = "nas4220b:orange:hdd", @@ -105,6 +101,6 @@ MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B") .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, - .timer = &ib4220b_timer, + .init_time = gemini_timer_init, .init_machine = ib4220b_init, MACHINE_END diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c index cd7437a..fa0a363 100644 --- a/arch/arm/mach-gemini/board-rut1xx.c +++ b/arch/arm/mach-gemini/board-rut1xx.c @@ -71,10 +71,6 @@ static struct platform_device rut1xx_leds = { }, }; -static struct sys_timer rut1xx_timer = { - .init = gemini_timer_init, -}; - static void __init rut1xx_init(void) { gemini_gpio_init(); @@ -89,6 +85,6 @@ MACHINE_START(RUT100, "Teltonika RUT100") .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, - .timer = &rut1xx_timer, + .init_time = gemini_timer_init, .init_machine = rut1xx_init, MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index a367880..3321cd6 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -80,10 +80,6 @@ static struct platform_device wbd111_leds_device = { }, }; -static struct sys_timer wbd111_timer = { - .init = gemini_timer_init, -}; - static struct mtd_partition wbd111_partitions[] = { { .name = "RedBoot", @@ -132,6 +128,6 @@ MACHINE_START(WBD111, "Wiliboard WBD-111") .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, - .timer = &wbd111_timer, + .init_time = gemini_timer_init, .init_machine = wbd111_init, MACHINE_END diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index f382811..fe33c82 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -80,10 +80,6 @@ static struct platform_device wbd222_leds_device = { }, }; -static struct sys_timer wbd222_timer = { - .init = gemini_timer_init, -}; - static struct mtd_partition wbd222_partitions[] = { { .name = "RedBoot", @@ -132,6 +128,6 @@ MACHINE_START(WBD222, "Wiliboard WBD-222") .atag_offset = 0x100, .map_io = gemini_map_io, .init_irq = gemini_init_irq, - .timer = &wbd222_timer, + .init_time = gemini_timer_init, .init_machine = wbd222_init, MACHINE_END diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h index 0efa262..02e2256 100644 --- a/arch/arm/mach-gemini/include/mach/uncompress.h +++ b/arch/arm/mach-gemini/include/mach/uncompress.h @@ -39,6 +39,4 @@ static inline void flush(void) */ #define arch_decomp_setup() -#define arch_decomp_wdog() - #endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index aa1331e..17ef91f 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -42,12 +42,12 @@ void __init arch_dma_init(dma_t *dma) } /* - * Return usecs since last timer reload + * Return nsecs since last timer reload * (timercount * (usecs perjiffie)) / (ticks per jiffie) */ -unsigned long h720x_gettimeoffset(void) +u32 h720x_gettimeoffset(void) { - return (CPU_REG (TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH; + return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000; } /* diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h index 2489537..7e73841 100644 --- a/arch/arm/mach-h720x/common.h +++ b/arch/arm/mach-h720x/common.h @@ -13,18 +13,18 @@ * */ -extern unsigned long h720x_gettimeoffset(void); +extern u32 h720x_gettimeoffset(void); extern void __init h720x_init_irq(void); extern void __init h720x_map_io(void); extern void h720x_restart(char, const char *); #ifdef CONFIG_ARCH_H7202 -extern struct sys_timer h7202_timer; +extern void h7202_timer_init(void); extern void __init init_hw_h7202(void); extern void __init h7202_init_irq(void); extern void __init h7202_init_time(void); #endif #ifdef CONFIG_ARCH_H7201 -extern struct sys_timer h7201_timer; +extern void h7201_timer_init(void); #endif diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c index 24df2a3..13c7412 100644 --- a/arch/arm/mach-h720x/cpu-h7201.c +++ b/arch/arm/mach-h720x/cpu-h7201.c @@ -44,8 +44,10 @@ static struct irqaction h7201_timer_irq = { /* * Setup TIMER0 as system timer */ -void __init h7201_init_time(void) +void __init h7201_timer_init(void) { + arch_gettimeoffset = h720x_gettimeoffset; + CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH; CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET; CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START; @@ -53,8 +55,3 @@ void __init h7201_init_time(void) setup_irq(IRQ_TIMER0, &h7201_timer_irq); } - -struct sys_timer h7201_timer = { - .init = h7201_init_time, - .offset = h720x_gettimeoffset, -}; diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index c37d570..e2ae7e8 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -178,8 +178,10 @@ static struct irqaction h7202_timer_irq = { /* * Setup TIMER0 as system timer */ -void __init h7202_init_time(void) +void __init h7202_timer_init(void) { + arch_gettimeoffset = h720x_gettimeoffset; + CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH; CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET; CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START; @@ -188,11 +190,6 @@ void __init h7202_init_time(void) setup_irq(IRQ_TIMER0, &h7202_timer_irq); } -struct sys_timer h7202_timer = { - .init = h7202_init_time, - .offset = h720x_gettimeoffset, -}; - void __init h7202_init_irq (void) { int irq; diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c index 5fdb20c..4fdeb68 100644 --- a/arch/arm/mach-h720x/h7201-eval.c +++ b/arch/arm/mach-h720x/h7201-eval.c @@ -32,7 +32,7 @@ MACHINE_START(H7201, "Hynix GMS30C7201") .atag_offset = 0x1000, .map_io = h720x_map_io, .init_irq = h720x_init_irq, - .timer = &h7201_timer, + .init_time = h7201_timer_init, .dma_zone_size = SZ_256M, .restart = h720x_restart, MACHINE_END diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c index 1696730..f68e967 100644 --- a/arch/arm/mach-h720x/h7202-eval.c +++ b/arch/arm/mach-h720x/h7202-eval.c @@ -74,7 +74,7 @@ MACHINE_START(H7202, "Hynix HMS30C7202") .atag_offset = 0x100, .map_io = h720x_map_io, .init_irq = h7202_init_irq, - .timer = &h7202_timer, + .init_time = h7202_timer_init, .init_machine = init_eval_h7202, .dma_zone_size = SZ_256M, .restart = h720x_restart, diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h index d662323..43e343c 100644 --- a/arch/arm/mach-h720x/include/mach/uncompress.h +++ b/arch/arm/mach-h720x/include/mach/uncompress.h @@ -32,6 +32,5 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() #endif diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 551c97e..44b12f9 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,5 +1,7 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7 + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC @@ -11,5 +13,7 @@ config ARCH_HIGHBANK select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select HAVE_SMP + select MAILBOX + select PL320_MBOX select SPARSE_IRQ select USE_OF diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index 80235b4..3f65206 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -2,7 +2,6 @@ #define __HIGHBANK_CORE_H extern void highbank_set_cpu_jump(int cpu, void *jump_addr); -extern void highbank_clocks_init(void); extern void highbank_restart(char, const char *); extern void __iomem *scu_base_addr; diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index e6c0612..a4f9f50 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -18,6 +18,7 @@ #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_irq.h> @@ -25,6 +26,7 @@ #include <linux/of_address.h> #include <linux/smp.h> #include <linux/amba/bus.h> +#include <linux/clk-provider.h> #include <asm/arch_timer.h> #include <asm/cacheflush.h> @@ -33,7 +35,6 @@ #include <asm/smp_twd.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> -#include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -67,12 +68,6 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr) HB_JUMP_TABLE_PHYS(cpu) + 15); } -const static struct of_device_id irq_match[] = { - { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - {} -}; - #ifdef CONFIG_CACHE_L2X0 static void highbank_l2x0_disable(void) { @@ -83,7 +78,7 @@ static void highbank_l2x0_disable(void) static void __init highbank_init_irq(void) { - of_irq_init(irq_match); + irqchip_init(); if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) highbank_scu_map_io(); @@ -117,7 +112,7 @@ static void __init highbank_timer_init(void) WARN_ON(!timer_base); irq = irq_of_parse_and_map(np, 0); - highbank_clocks_init(); + of_clk_init(NULL); lookup.clk = of_clk_get(np, 0); clkdev_add(&lookup); @@ -130,10 +125,6 @@ static void __init highbank_timer_init(void) arch_timer_sched_clock_init(); } -static struct sys_timer highbank_timer = { - .init = highbank_timer_init, -}; - static void highbank_power_off(void) { highbank_set_pwr_shutdown(); @@ -210,8 +201,7 @@ DT_MACHINE_START(HIGHBANK, "Highbank") .smp = smp_ops(highbank_smp_ops), .map_io = debug_ll_io_init, .init_irq = highbank_init_irq, - .timer = &highbank_timer, - .handle_irq = gic_handle_irq, + .init_time = highbank_timer_init, .init_machine = highbank_init, .dt_compat = highbank_match, .restart = highbank_restart, diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index 4ecc864..8797a70 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -17,9 +17,9 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <asm/smp_scu.h> -#include <asm/hardware/gic.h> #include "core.h" @@ -33,7 +33,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu) static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { highbank_set_cpu_jump(cpu, secondary_startup); - gic_raise_softirq(cpumask_of(cpu), 0); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); return 0; } @@ -56,8 +56,6 @@ static void __init highbank_smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0a2349d..4c9c6f9 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -95,9 +95,6 @@ config MACH_MX27 config ARCH_MX5 bool -config ARCH_MX50 - bool - config ARCH_MX51 bool @@ -164,11 +161,6 @@ config SOC_IMX5 select CPU_V7 select MXC_TZIC -config SOC_IMX50 - bool - select ARCH_MX50 - select SOC_IMX5 - config SOC_IMX51 bool select ARCH_MX5 @@ -488,7 +480,7 @@ config MACH_MX31ADS_WM1133_EV1 bool "Support Wolfson Microelectronics 1133-EV1 module" depends on MACH_MX31ADS depends on MFD_WM8350_I2C - depends on REGULATOR_WM8350 + depends on REGULATOR_WM8350 = y select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8352_CONFIG_MODE_0 help @@ -738,25 +730,10 @@ endif if ARCH_MULTI_V7 -comment "i.MX5 platforms:" - -config MACH_MX50_RDP - bool "Support MX50 reference design platform" - depends on BROKEN - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select SOC_IMX50 - help - Include support for MX50 reference design platform (RDP) board. This - includes specific configurations for the board and its peripherals. - comment "i.MX51 machines:" config MACH_IMX51_DT bool "Support i.MX51 platforms from device tree" - select MACH_MX51_BABBAGE select SOC_IMX51 help Include support for Freescale i.MX51 based platforms @@ -777,19 +754,6 @@ config MACH_MX51_BABBAGE u-boot. This includes specific configurations for the board and its peripherals. -config MACH_MX51_3DS - bool "Support MX51PDK (3DS)" - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_DEBUG_BOARD - select SOC_IMX51 - help - Include support for MX51PDK (3DS) platform. This includes specific - configurations for the board and its peripherals. - config MACH_EUKREA_CPUIMX51SD bool "Support Eukrea CPUIMX51SD module" select IMX_HAVE_PLATFORM_FSL_USB2_UDC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 0634b31..c4ce090 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -28,7 +28,11 @@ obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o + +ifeq ($(CONFIG_CPU_IDLE),y) +obj-y += cpuidle.o +obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o +endif ifdef CONFIG_SND_IMX_SOC obj-y += ssi-fiq.o @@ -88,7 +92,6 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o -obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o @@ -103,10 +106,8 @@ endif # i.MX5 based machines obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o -obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o -obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index b27815d..41ba1bb 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -22,10 +22,6 @@ zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 -zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000 -params_phys-$(CONFIG_SOC_IMX50) := 0x70000100 -initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000 - zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000 params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000 diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 2c570cd..69858c7 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -224,6 +224,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate) clk_prepare_enable(clk[emi_ahb]); + /* Clock source for gpt must be derived from AHB */ + clk_set_parent(clk[per5_sel], clk[ahb]); + clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 1ffe3b534..30b3242 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -62,7 +62,7 @@ static const char *clko_sel_clks[] = { "32k", "usb_div", "dptc", }; -static const char *ssi_sel_clks[] = { "spll", "mpll", }; +static const char *ssi_sel_clks[] = { "spll_gate", "mpll", }; enum mx27_clks { dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div, @@ -82,7 +82,7 @@ enum mx27_clks { csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate, uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate, uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel, - mpll_sel, clk_max + mpll_sel, spll_gate, clk_max }; static struct clk *clk[clk_max]; @@ -104,6 +104,7 @@ int __init mx27_clocks_init(unsigned long fref) ARRAY_SIZE(mpll_sel_clks)); clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0); clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0); + clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1); clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3); if (mx27_revision() >= IMX_CHIP_REVISION_2_0) { @@ -121,7 +122,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6); clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks)); clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6); - clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3); + clk[usb_div] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3); clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks)); clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); if (mx27_revision() >= IMX_CHIP_REVISION_2_0) @@ -228,9 +229,12 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2"); clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2"); - clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0"); - clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1"); - clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2"); + clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.0"); + clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx27-cspi.0"); + clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.1"); + clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx27-cspi.1"); + clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.2"); + clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx27-cspi.2"); clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0"); clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0"); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 16ccbd4..b5b65f3 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -34,8 +34,8 @@ static const char *csi_sel[] = { "upll", "spll", }; static const char *fir_sel[] = { "mcu_main", "upll", "spll" }; enum mx31_clks { - ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg, per_div, - per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre, + dummy, ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg, + per_div, per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre, fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate, iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate, uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate, @@ -46,12 +46,15 @@ enum mx31_clks { }; static struct clk *clk[clk_max]; +static struct clk_onecell_data clk_data; int __init mx31_clocks_init(unsigned long fref) { void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR); int i; + struct device_node *np; + clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckih] = imx_clk_fixed("ckih", fref); clk[ckil] = imx_clk_fixed("ckil", 32768); clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MXC_CCM_MPCTL); @@ -116,6 +119,14 @@ int __init mx31_clocks_init(unsigned long fref) pr_err("imx31 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm"); + + if (np) { + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + } + clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index f0727e8..74e3a34 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -67,13 +67,13 @@ enum mx35_clks { static struct clk *clk[clk_max]; -int __init mx35_clocks_init() +int __init mx35_clocks_init(void) { void __iomem *base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR); u32 pdr0, consumer_sel, hsp_sel; struct arm_ahb_div *aad; unsigned char *hsp_div; - int i; + u32 i; pdr0 = __raw_readl(base + MXC_CCM_PDR0); consumer_sel = (pdr0 >> 16) & 0xf; diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index c0c4e72..540138c 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -54,9 +54,18 @@ #define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) #define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) +#define CGPR 0x64 +#define BM_CGPR_CHICKEN_BIT (0x1 << 17) + static void __iomem *ccm_base; -void __init imx6q_clock_map_io(void) { } +void imx6q_set_chicken_bit(void) +{ + u32 val = readl_relaxed(ccm_base + CGPR); + + val |= BM_CGPR_CHICKEN_BIT; + writel_relaxed(val, ccm_base + CGPR); +} int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) { @@ -68,6 +77,7 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) break; case WAIT_UNCLOCKED: val |= 0x1 << BP_CLPCR_LPM; + val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; break; case STOP_POWER_ON: val |= 0x2 << BP_CLPCR_LPM; diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index fa36fb8..5a800bf 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -21,7 +21,6 @@ extern void mx25_map_io(void); extern void mx27_map_io(void); extern void mx31_map_io(void); extern void mx35_map_io(void); -extern void mx50_map_io(void); extern void mx51_map_io(void); extern void mx53_map_io(void); extern void imx1_init_early(void); @@ -30,7 +29,6 @@ extern void imx25_init_early(void); extern void imx27_init_early(void); extern void imx31_init_early(void); extern void imx35_init_early(void); -extern void imx50_init_early(void); extern void imx51_init_early(void); extern void imx53_init_early(void); extern void mxc_init_irq(void __iomem *); @@ -41,7 +39,6 @@ extern void mx25_init_irq(void); extern void mx27_init_irq(void); extern void mx31_init_irq(void); extern void mx35_init_irq(void); -extern void mx50_init_irq(void); extern void mx51_init_irq(void); extern void mx53_init_irq(void); extern void imx1_soc_init(void); @@ -50,7 +47,6 @@ extern void imx25_soc_init(void); extern void imx27_soc_init(void); extern void imx31_soc_init(void); extern void imx35_soc_init(void); -extern void imx50_soc_init(void); extern void imx51_soc_init(void); extern void imx51_init_late(void); extern void imx53_init_late(void); @@ -109,27 +105,22 @@ void tzic_handle_irq(struct pt_regs *); #define imx27_handle_irq avic_handle_irq #define imx31_handle_irq avic_handle_irq #define imx35_handle_irq avic_handle_irq -#define imx50_handle_irq tzic_handle_irq #define imx51_handle_irq tzic_handle_irq #define imx53_handle_irq tzic_handle_irq -#define imx6q_handle_irq gic_handle_irq extern void imx_enable_cpu(int cpu, bool enable); extern void imx_set_cpu_jump(int cpu, void *jump_addr); -#ifdef CONFIG_DEBUG_LL -extern void imx_lluart_map_io(void); -#else -static inline void imx_lluart_map_io(void) {} -#endif extern void v7_cpu_resume(void); extern u32 *pl310_get_save_ptr(void); #ifdef CONFIG_SMP extern void v7_secondary_startup(void); extern void imx_scu_map_io(void); extern void imx_smp_prepare(void); +extern void imx_scu_standby_enable(void); #else static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} +static inline void imx_scu_standby_enable(void) {} #endif extern void imx_enable_cpu(int cpu, bool enable); extern void imx_set_cpu_jump(int cpu, void *jump_addr); @@ -139,7 +130,7 @@ extern void imx_gpc_init(void); extern void imx_gpc_pre_suspend(void); extern void imx_gpc_post_resume(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); -extern void imx6q_clock_map_io(void); +extern void imx6q_set_chicken_bit(void); extern void imx_cpu_die(unsigned int cpu); extern int imx_cpu_kill(unsigned int cpu); diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index d887600..d7ce722 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -22,7 +22,6 @@ static int mx5_cpu_rev = -1; #define IIM_SREV 0x24 -#define MX50_HW_ADADIG_DIGPROG 0xB0 static int get_mx51_srev(void) { @@ -108,41 +107,3 @@ int mx53_revision(void) return mx5_cpu_rev; } EXPORT_SYMBOL(mx53_revision); - -static int get_mx50_srev(void) -{ - void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K); - u32 rev; - - if (!anatop) { - mx5_cpu_rev = -EINVAL; - return 0; - } - - rev = readl(anatop + MX50_HW_ADADIG_DIGPROG); - rev &= 0xff; - - iounmap(anatop); - if (rev == 0x0) - return IMX_CHIP_REVISION_1_0; - else if (rev == 0x1) - return IMX_CHIP_REVISION_1_1; - return 0; -} - -/* - * Returns: - * the silicon revision of the cpu - * -EINVAL - not a mx50 - */ -int mx50_revision(void) -{ - if (!cpu_is_mx50()) - return -EINVAL; - - if (mx5_cpu_rev == -1) - mx5_cpu_rev = get_mx50_srev(); - - return mx5_cpu_rev; -} -EXPORT_SYMBOL(mx50_revision); diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c new file mode 100644 index 0000000..d533e26 --- /dev/null +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clockchips.h> +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> + +#include "common.h" +#include "cpuidle.h" + +static atomic_t master = ATOMIC_INIT(0); +static DEFINE_SPINLOCK(master_lock); + +static int imx6q_enter_wait(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + int cpu = dev->cpu; + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); + + if (atomic_inc_return(&master) == num_online_cpus()) { + /* + * With this lock, we prevent other cpu to exit and enter + * this function again and become the master. + */ + if (!spin_trylock(&master_lock)) + goto idle; + imx6q_set_lpm(WAIT_UNCLOCKED); + cpu_do_idle(); + imx6q_set_lpm(WAIT_CLOCKED); + spin_unlock(&master_lock); + goto done; + } + +idle: + cpu_do_idle(); +done: + atomic_dec(&master); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); + + return index; +} + +/* + * For each cpu, setup the broadcast timer because local timer + * stops for the states other than WFI. + */ +static void imx6q_setup_broadcast_timer(void *arg) +{ + int cpu = smp_processor_id(); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); +} + +static struct cpuidle_driver imx6q_cpuidle_driver = { + .name = "imx6q_cpuidle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states = { + /* WFI */ + ARM_CPUIDLE_WFI_STATE, + /* WAIT */ + { + .exit_latency = 50, + .target_residency = 75, + .flags = CPUIDLE_FLAG_TIME_VALID, + .enter = imx6q_enter_wait, + .name = "WAIT", + .desc = "Clock off", + }, + }, + .state_count = 2, + .safe_state_index = 0, +}; + +int __init imx6q_cpuidle_init(void) +{ + /* Need to enable SCU standby for entering WAIT modes */ + imx_scu_standby_enable(); + + /* Set chicken bit to get a reliable WAIT mode support */ + imx6q_set_chicken_bit(); + + /* Configure the broadcast timer on each cpu */ + on_each_cpu(imx6q_setup_broadcast_timer, NULL, 1); + + return imx_cpuidle_init(&imx6q_cpuidle_driver); +} diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index bc932d1..e092d13 100644 --- a/arch/arm/mach-imx/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h @@ -14,9 +14,14 @@ #ifdef CONFIG_CPU_IDLE extern int imx_cpuidle_init(struct cpuidle_driver *drv); +extern int imx6q_cpuidle_init(void); #else static inline int imx_cpuidle_init(struct cpuidle_driver *drv) { return -ENODEV; } +static inline int imx6q_cpuidle_init(void) +{ + return -ENODEV; +} #endif diff --git a/arch/arm/mach-imx/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h deleted file mode 100644 index 2c29039..0000000 --- a/arch/arm/mach-imx/devices-imx50.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include "devices/devices-common.h" - -extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[]; -#define imx50_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata) - -extern const struct imx_fec_data imx50_fec_data; -#define imx50_add_fec(pdata) \ - imx_add_fec(&imx50_fec_data, pdata) - -extern const struct imx_imx_i2c_data imx50_imx_i2c_data[]; -#define imx50_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata) diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 9a8f1ca..9b9ba1f 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -1,6 +1,6 @@ config IMX_HAVE_PLATFORM_FEC bool - default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53 + default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 config IMX_HAVE_PLATFORM_FLEXCAN bool diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c index 2cb188a..63eba08 100644 --- a/arch/arm/mach-imx/devices/platform-fec.c +++ b/arch/arm/mach-imx/devices/platform-fec.c @@ -35,12 +35,6 @@ const struct imx_fec_data imx35_fec_data __initconst = imx_fec_data_entry_single(MX35, "imx27-fec"); #endif -#ifdef CONFIG_SOC_IMX50 -/* i.mx50 has the i.mx25 type fec */ -const struct imx_fec_data imx50_fec_data __initconst = - imx_fec_data_entry_single(MX50, "imx25-fec"); -#endif - #ifdef CONFIG_SOC_IMX51 /* i.mx51 has the i.mx27 type fec */ const struct imx_fec_data imx51_fec_data __initconst = diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c index 8e30e57..57d342e 100644 --- a/arch/arm/mach-imx/devices/platform-imx-i2c.c +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -70,16 +70,6 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX35 */ -#ifdef CONFIG_SOC_IMX50 -const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = { -#define imx50_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K) - imx50_imx_i2c_data_entry(0, 1), - imx50_imx_i2c_data_entry(1, 2), - imx50_imx_i2c_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX51 */ - #ifdef CONFIG_SOC_IMX51 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { #define imx51_imx_i2c_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c index 67bf866..faac4aa 100644 --- a/arch/arm/mach-imx/devices/platform-imx-uart.c +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -94,18 +94,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX35 */ -#ifdef CONFIG_SOC_IMX50 -const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst = { -#define imx50_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_1irq_data_entry(MX50, _id, _hwid, SZ_4K) - imx50_imx_uart_data_entry(0, 1), - imx50_imx_uart_data_entry(1, 2), - imx50_imx_uart_data_entry(2, 3), - imx50_imx_uart_data_entry(3, 4), - imx50_imx_uart_data_entry(4, 5), -}; -#endif /* ifdef CONFIG_SOC_IMX50 */ - #ifdef CONFIG_SOC_IMX51 const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = { #define imx51_imx_uart_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c index 04a5961..e02de18 100644 --- a/arch/arm/mach-imx/epit.c +++ b/arch/arm/mach-imx/epit.c @@ -178,7 +178,6 @@ static struct irqaction epit_timer_irq = { static struct clock_event_device clockevent_epit = { .name = "epit", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .set_mode = epit_set_mode, .set_next_event = epit_set_next_event, .rating = 200, @@ -186,18 +185,10 @@ static struct clock_event_device clockevent_epit = { static int __init epit_clockevent_init(struct clk *timer_clk) { - unsigned int c = clk_get_rate(timer_clk); - - clockevent_epit.mult = div_sc(c, NSEC_PER_SEC, - clockevent_epit.shift); - clockevent_epit.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_epit); - clockevent_epit.min_delta_ns = - clockevent_delta2ns(0x800, &clockevent_epit); - clockevent_epit.cpumask = cpumask_of(0); - - clockevents_register_device(&clockevent_epit); + clockevents_config_and_register(&clockevent_epit, + clk_get_rate(timer_clk), + 0x800, 0xfffffffe); return 0; } diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index e1537f9..a96ccc7 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -15,7 +15,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <asm/hardware/gic.h> +#include <linux/irqchip/arm-gic.h> #define GPC_IMR1 0x008 #define GPC_PGC_CPU_PDN 0x2a0 @@ -101,11 +101,16 @@ static void imx_gpc_irq_mask(struct irq_data *d) void __init imx_gpc_init(void) { struct device_node *np; + int i; np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc"); gpc_base = of_iomap(np, 0); WARN_ON(!gpc_base); + /* Initially mask all interrupts */ + for (i = 0; i < IMR_NUM; i++) + writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4); + /* Register GPC as the secondary interrupt controller behind GIC */ gic_arch_extn.irq_mask = imx_gpc_irq_mask; gic_arch_extn.irq_unmask = imx_gpc_irq_unmask; diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 3ce7fa3..911e9b3 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -72,11 +72,6 @@ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000 * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 - * mx50: - * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 - * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000 - * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 - * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000 * mx51: * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 * IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000 @@ -108,7 +103,6 @@ #include "mxc.h" #include "mx6q.h" -#include "mx50.h" #include "mx51.h" #include "mx53.h" #include "mx3x.h" diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 7e49deb..921fc15 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -17,53 +17,6 @@ .section ".text.head", "ax" -/* - * The secondary kernel init calls v7_flush_dcache_all before it enables - * the L1; however, the L1 comes out of reset in an undefined state, so - * the clean + invalidate performed by v7_flush_dcache_all causes a bunch - * of cache lines with uninitialized data and uninitialized tags to get - * written out to memory, which does really unpleasant things to the main - * processor. We fix this by performing an invalidate, rather than a - * clean + invalidate, before jumping into the kernel. - * - * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs - * to be called for both secondary cores startup and primary core resume - * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S. - */ -ENTRY(v7_invalidate_l1) - mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mcr p15, 2, r0, c0, c0, 0 - mrc p15, 1, r0, c0, c0, 0 - - ldr r1, =0x7fff - and r2, r1, r0, lsr #13 - - ldr r1, =0x3ff - - and r3, r1, r0, lsr #3 @ NumWays - 1 - add r2, r2, #1 @ NumSets - - and r0, r0, #0x7 - add r0, r0, #4 @ SetShift - - clz r1, r3 @ WayShift - add r4, r3, #1 @ NumWays -1: sub r2, r2, #1 @ NumSets-- - mov r3, r4 @ Temp = NumWays -2: subs r3, r3, #1 @ Temp-- - mov r5, r3, lsl r1 - mov r6, r2, lsl r0 - orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) - mcr p15, 0, r5, c7, c6, 2 - bgt 2b - cmp r2, #0 - bgt 1b - dsb - isb - mov pc, lr -ENDPROC(v7_invalidate_l1) - #ifdef CONFIG_SMP ENTRY(v7_secondary_startup) bl v7_invalidate_l1 diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index e17dfbc..03b65e5 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -22,15 +22,6 @@ static void __init imx25_dt_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init imx25_timer_init(void) -{ - mx25_clocks_init_dt(); -} - -static struct sys_timer imx25_timer = { - .init = imx25_timer_init, -}; - static const char * const imx25_dt_board_compat[] __initconst = { "fsl,imx25", NULL @@ -41,7 +32,7 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .init_early = imx25_init_early, .init_irq = mx25_init_irq, .handle_irq = imx25_handle_irq, - .timer = &imx25_timer, + .init_time = imx25_timer_init, .init_machine = imx25_dt_init, .dt_compat = imx25_dt_board_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index ebfae96..c915a49 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -39,26 +39,22 @@ static void __init imx27_dt_init(void) imx27_auxdata_lookup, NULL); } -static void __init imx27_timer_init(void) -{ - mx27_clocks_init_dt(); -} - -static struct sys_timer imx27_timer = { - .init = imx27_timer_init, -}; - static const char * const imx27_dt_board_compat[] __initconst = { "fsl,imx27", NULL }; +static void __init imx27_timer_init(void) +{ + mx27_clocks_init_dt(); +} + DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, .handle_irq = imx27_handle_irq, - .timer = &imx27_timer, + .init_time = imx27_timer_init, .init_machine = imx27_dt_init, .dt_compat = imx27_dt_board_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index af476de..67de611 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -18,46 +18,27 @@ #include "common.h" #include "mx31.h" -static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR, - "imx21-uart.0", NULL), - OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR, - "imx21-uart.1", NULL), - OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR, - "imx21-uart.2", NULL), - OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR, - "imx21-uart.3", NULL), - OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR, - "imx21-uart.4", NULL), - { /* sentinel */ } -}; - static void __init imx31_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - imx31_auxdata_lookup, NULL); -} - -static void __init imx31_timer_init(void) -{ - mx31_clocks_init_dt(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static struct sys_timer imx31_timer = { - .init = imx31_timer_init, -}; - static const char *imx31_dt_board_compat[] __initdata = { "fsl,imx31", NULL }; +static void __init imx31_dt_timer_init(void) +{ + mx31_clocks_init_dt(); +} + DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, - .timer = &imx31_timer, + .init_time = imx31_dt_timer_init, .init_machine = imx31_dt_init, .dt_compat = imx31_dt_board_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 5ffa40c..e2926a8 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -24,26 +24,22 @@ static void __init imx51_dt_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init imx51_timer_init(void) -{ - mx51_clocks_init_dt(); -} - -static struct sys_timer imx51_timer = { - .init = imx51_timer_init, -}; - static const char *imx51_dt_board_compat[] __initdata = { "fsl,imx51", NULL }; +static void __init imx51_timer_init(void) +{ + mx51_clocks_init_dt(); +} + DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, .handle_irq = imx51_handle_irq, - .timer = &imx51_timer, + .init_time = imx51_timer_init, .init_machine = imx51_dt_init, .init_late = imx51_init_late, .dt_compat = imx51_dt_board_compat, diff --git a/arch/arm/mach-imx/iomux-mx50.h b/arch/arm/mach-imx/iomux-mx50.h deleted file mode 100644 index 00f56e0..0000000 --- a/arch/arm/mach-imx/iomux-mx50.h +++ /dev/null @@ -1,977 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_IOMUX_MX50_H__ -#define __MACH_IOMUX_MX50_H__ - -#include "iomux-v3.h" - -#define MX50_ELCDIF_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH) - -#define MX50_SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH) - -#define MX50_UART_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE) - -#define MX50_I2C_PAD_CTRL (PAD_CTL_ODE | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_HYS) - -#define MX50_USB_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP) - -#define MX50_FEC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | \ - PAD_CTL_DSE_HIGH) - -#define MX50_OWIRE_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_ODE | \ - PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST) - -#define MX50_KEYPAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_HIGH) - -#define MX50_CSPI_SS_PAD (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_HIGH) - -#define MX50_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x2CC, 0x20, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_COL0__GPIO_4_0 IOMUX_PAD(0x2CC, 0x20, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_COL0__NANDF_CLE IOMUX_PAD(0x2CC, 0x20, 2, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x2D0, 0x24, 0, 0x0, 0, MX50_KEYPAD_CTRL) -#define MX50_PAD_KEY_ROW0__GPIO_4_1 IOMUX_PAD(0x2D0, 0x24, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_ROW0__NANDF_ALE IOMUX_PAD(0x2D0, 0x24, 2, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x2D4, 0x28, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_COL1__GPIO_4_2 IOMUX_PAD(0x2D4, 0x28, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_COL1__NANDF_CE0 IOMUX_PAD(0x2D4, 0x28, 2, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x2D8, 0x2C, 0, 0x0, 0, MX50_KEYPAD_CTRL) -#define MX50_PAD_KEY_ROW1__GPIO_4_3 IOMUX_PAD(0x2D8, 0x2C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_ROW1__NANDF_CE1 IOMUX_PAD(0x2D8, 0x2C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x2DC, 0x30, 0, 0x0, 0, MX50_KEYPAD_CTRL) -#define MX50_PAD_KEY_COL2__GPIO_4_4 IOMUX_PAD(0x2DC, 0x30, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_COL2__NANDF_CE2 IOMUX_PAD(0x2DC, 0x30, 2, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x2E0, 0x34, 0, 0x0, 0, MX50_KEYPAD_CTRL) -#define MX50_PAD_KEY_ROW2__GPIO_4_5 IOMUX_PAD(0x2E0, 0x34, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_ROW2__NANDF_CE3 IOMUX_PAD(0x2E0, 0x34, 2, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x2E4, 0x38, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_COL3__GPIO_4_6 IOMUX_PAD(0x2E4, 0x38, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_COL3__NANDF_READY IOMUX_PAD(0x2E4, 0x38, 2, 0x7b4, 0, PAD_CTL_PKE | \ - PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) -#define MX50_PAD_KEY_COL3__SDMA_EXT0 IOMUX_PAD(0x2E4, 0x38, 6, 0x7b8, 0, NO_PAD_CTRL) - -#define MX50_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x2E8, 0x3C, 0, 0x0, 0, MX50_KEYPAD_CTRL) -#define MX50_PAD_KEY_ROW3__GPIO_4_7 IOMUX_PAD(0x2E8, 0x3C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_KEY_ROW3__NANDF_DQS IOMUX_PAD(0x2E8, 0x3C, 2, 0x7b0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_KEY_ROW3__SDMA_EXT1 IOMUX_PAD(0x2E8, 0x3C, 6, 0x7bc, 0, NO_PAD_CTRL) - -#define MX50_PAD_I2C1_SCL__I2C1_SCL IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \ - MX50_I2C_PAD_CTRL) -#define MX50_PAD_I2C1_SCL__GPIO_6_18 IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C1_SCL__UART2_TXD IOMUX_PAD(0x2EC, 0x40, 2, 0x0, 0, MX50_UART_PAD_CTRL) - -#define MX50_PAD_I2C1_SDA__I2C1_SDA IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \ - MX50_I2C_PAD_CTRL) -#define MX50_PAD_I2C1_SDA__GPIO_6_19 IOMUX_PAD(0x2F0, 0x44, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C1_SDA__UART2_RXD IOMUX_PAD(0x2F0, 0x44, 2, 0x7cc, 1, MX50_UART_PAD_CTRL) - -#define MX50_PAD_I2C2_SCL__I2C2_SCL IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \ - MX50_I2C_PAD_CTRL) -#define MX50_PAD_I2C2_SCL__GPIO_6_20 IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C2_SCL__UART2_CTS IOMUX_PAD(0x2F4, 0x48, 2, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_I2C2_SCL__DCDC_OK IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_I2C2_SDA__I2C2_SDA IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \ - MX50_I2C_PAD_CTRL) -#define MX50_PAD_I2C2_SDA__GPIO_6_21 IOMUX_PAD(0x2F8, 0x4C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C2_SDA__UART2_RTS IOMUX_PAD(0x2F8, 0x4C, 2, 0x7c8, 1, MX50_UART_PAD_CTRL) -#define MX50_PAD_I2C2_SDA__PWRSTABLE IOMUX_PAD(0x2F8, 0x4C, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_I2C3_SCL__I2C3_SCL IOMUX_PAD(0x2FC, 0x50, IOMUX_CONFIG_SION, 0x0, 0, \ - MX50_I2C_PAD_CTRL) -#define MX50_PAD_I2C3_SCL__GPIO_6_22 IOMUX_PAD(0x2FC, 0x50, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C3_SCL__FEC_MDC IOMUX_PAD(0x2FC, 0x50, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_I2C3_SCL__PMIC_RDY IOMUX_PAD(0x2FC, 0x50, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C3_SCL__GPT_CAPIN1 IOMUX_PAD(0x2FC, 0x50, 5, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C3_SCL__USBOTG_OC IOMUX_PAD(0x2FC, 0x50, 7, 0x7E8, 0, MX50_USB_PAD_CTRL) - -#define MX50_PAD_I2C3_SDA__I2C3_SDA IOMUX_PAD(0x300, 0x54, IOMUX_CONFIG_SION, 0x0, 0, \ - MX50_I2C_PAD_CTRL) -#define MX50_PAD_I2C3_SDA__GPIO_6_23 IOMUX_PAD(0x300, 0x54, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C3_SDA__FEC_MDIO IOMUX_PAD(0x300, 0x54, 2, 0x774, 0, MX50_FEC_PAD_CTRL) -#define MX50_PAD_I2C3_SDA__PWRFAIL_INT IOMUX_PAD(0x300, 0x54, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C3_SDA__ALARM_DEB IOMUX_PAD(0x300, 0x54, 4, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C3_SDA__GPT_CAPIN1 IOMUX_PAD(0x300, 0x54, 5, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_I2C3_SDA__USBOTG_PWR IOMUX_PAD(0x300, 0x54, 7, 0x0, 0, \ - PAD_CTL_PKE | PAD_CTL_DSE_HIGH) - -#define MX50_PAD_PWM1__PWM1_PWMO IOMUX_PAD(0x304, 0x58, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_PWM1__GPIO_6_24 IOMUX_PAD(0x304, 0x58, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_PWM1__USBOTG_OC IOMUX_PAD(0x304, 0x58, 2, 0x7E8, 1, MX50_USB_PAD_CTRL) -#define MX50_PAD_PWM1__GPT_CMPOUT1 IOMUX_PAD(0x304, 0x58, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PWM2__PWM2_PWMO IOMUX_PAD(0x308, 0x5C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_PWM2__GPIO_6_25 IOMUX_PAD(0x308, 0x5C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_PWM2__USBOTG_PWR IOMUX_PAD(0x308, 0x5C, 2, 0x0, 0, \ - PAD_CTL_PKE | PAD_CTL_DSE_HIGH) -#define MX50_PAD_PWM2__DCDC_PWM IOMUX_PAD(0x308, 0x5C, 4, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_PWM2__GPT_CMPOUT2 IOMUX_PAD(0x308, 0x5C, 5, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_PWM2__ANY_PU_RST IOMUX_PAD(0x308, 0x5C, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_OWIRE__OWIRE IOMUX_PAD(0x30C, 0x60, 0, 0x0, 0, MX50_OWIRE_PAD_CTRL) -#define MX50_PAD_OWIRE__GPIO_6_26 IOMUX_PAD(0x30C, 0x60, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_OWIRE__USBH1_OC IOMUX_PAD(0x30C, 0x60, 2, 0x0, 0, MX50_USB_PAD_CTRL) -#define MX50_PAD_OWIRE__SSI_EXT1_CLK IOMUX_PAD(0x30C, 0x60, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_OWIRE__EPDC_PWRIRQ IOMUX_PAD(0x30C, 0x60, 4, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_OWIRE__GPT_CMPOUT3 IOMUX_PAD(0x30C, 0x60, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPITO__EPITO IOMUX_PAD(0x310, 0x64, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPITO__GPIO_6_27 IOMUX_PAD(0x310, 0x64, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPITO__USBH1_PWR IOMUX_PAD(0x310, 0x64, 2, 0x0, 0, \ - PAD_CTL_PKE | PAD_CTL_DSE_HIGH) -#define MX50_PAD_EPITO__SSI_EXT2_CLK IOMUX_PAD(0x310, 0x64, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPITO__TOG_EN IOMUX_PAD(0x310, 0x64, 4, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPITO__GPT_CLKIN IOMUX_PAD(0x310, 0x64, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_WDOG__WDOG IOMUX_PAD(0x314, 0x68, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_WDOG__GPIO_6_28 IOMUX_PAD(0x314, 0x68, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_WDOG__WDOG_RST IOMUX_PAD(0x314, 0x68, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_WDOG__XTAL32K IOMUX_PAD(0x314, 0x68, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SSI_TXFS__SSI_TXFS IOMUX_PAD(0x318, 0x6C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_TXFS__GPIO_6_0 IOMUX_PAD(0x318, 0x6C, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SSI_TXC__SSI_TXC IOMUX_PAD(0x31C, 0x70, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_TXC__GPIO_6_1 IOMUX_PAD(0x31C, 0x70, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SSI_TXD__SSI_TXD IOMUX_PAD(0x320, 0x74, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_TXD__GPIO_6_2 IOMUX_PAD(0x320, 0x74, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_TXD__CSPI_RDY IOMUX_PAD(0x320, 0x74, 4, 0x6e8, 0, NO_PAD_CTRL) - -#define MX50_PAD_SSI_RXD__SSI_RXD IOMUX_PAD(0x324, 0x78, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXD__GPIO_6_3 IOMUX_PAD(0x324, 0x78, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXD__CSPI_SS3 IOMUX_PAD(0x324, 0x78, 4, 0x6f4, 0, MX50_CSPI_SS_PAD) - -#define MX50_PAD_SSI_RXFS__AUD3_RXFS IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXFS__GPIO_6_4 IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXFS__UART5_TXD IOMUX_PAD(0x328, 0x7C, 2, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_SSI_RXFS__WEIM_D6 IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXFS__CSPI_SS2 IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_SSI_RXFS__FEC_COL IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SSI_RXFS__FEC_MDC IOMUX_PAD(0x328, 0x7C, 6, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_SSI_RXC__AUD3_RXC IOMUX_PAD(0x32C, 0x80, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXC__GPIO_6_5 IOMUX_PAD(0x32C, 0x80, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXC__UART5_RXD IOMUX_PAD(0x32C, 0x80, 2, 0x7e4, 1, MX50_UART_PAD_CTRL) -#define MX50_PAD_SSI_RXC__WEIM_D7 IOMUX_PAD(0x32C, 0x80, 3, 0x808, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXC__CSPI_SS1 IOMUX_PAD(0x32C, 0x80, 4, 0x6ec, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_SSI_RXC__FEC_RX_CLK IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL) -#define MX50_PAD_SSI_RXC__FEC_MDIO IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL) - -#define MX50_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x330, 0x84, 0, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART1_TXD__GPIO_6_6 IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART1_RXD__GPIO_6_7 IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x338, 0x8C, 0, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART1_CTS__GPIO_6_8 IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART1_CTS__UART5_TXD IOMUX_PAD(0x338, 0x8C, 2, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART1_CTS__SD4_D4 IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART1_CTS__SD4_CMD IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL) - -#define MX50_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART1_RTS__GPIO_6_9 IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART1_RTS__UART5_RXD IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART1_RTS__SD4_D5 IOMUX_PAD(0x33C, 0x90, 4, 0x764, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART1_RTS__SD4_CLK IOMUX_PAD(0x33C, 0x90, 5, 0x748, 0, MX50_SD_PAD_CTRL) - -#define MX50_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x340, 0x94, 0, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART2_TXD__GPIO_6_10 IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART2_TXD__SD4_D6 IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART2_TXD__SD4_D4 IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL) - -#define MX50_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x344, 0x98, 0, 0x7cc, 3, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART2_RXD__GPIO_6_11 IOMUX_PAD(0x344, 0x98, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART2_RXD__SD4_D7 IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART2_RXD__SD4_D5 IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL) - -#define MX50_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x348, 0x9C, 0, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART2_CTS__GPIO_6_12 IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART2_CTS__SD4_CMD IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART2_CTS__SD4_D6 IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL) - -#define MX50_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x34C, 0xA0, 0, 0x7c8, 3, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART2_RTS__GPIO_6_13 IOMUX_PAD(0x34C, 0xA0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART2_RTS__SD4_CLK IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART2_RTS__SD4_D7 IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL) - -#define MX50_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x350, 0xA4, 0, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART3_TXD__GPIO_6_14 IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART3_TXD__SD1_D4 IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART3_TXD__SD4_D0 IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART3_TXD__SD2_WP IOMUX_PAD(0x350, 0xA4, 5, 0x744, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART3_TXD__WEIM_D12 IOMUX_PAD(0x350, 0xA4, 6, 0x81c, 0, NO_PAD_CTRL) - -#define MX50_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x354, 0xA8, 0, 0x7d4, 1, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART3_RXD__GPIO_6_15 IOMUX_PAD(0x354, 0xA8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART3_RXD__SD1_D5 IOMUX_PAD(0x354, 0xA8, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART3_RXD__SD4_D1 IOMUX_PAD(0x354, 0xA8, 4, 0x754, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART3_RXD__SD2_CD IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART3_RXD__WEIM_D13 IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL) - -#define MX50_PAD_UART4_TXD__UART4_TXD IOMUX_PAD(0x358, 0xAC, 0, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART4_TXD__GPIO_6_16 IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART4_TXD__UART3_CTS IOMUX_PAD(0x358, 0xAC, 2, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART4_TXD__SD1_D6 IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART4_TXD__SD4_D2 IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART4_TXD__SD2_LCTL IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART4_TXD__WEIM_D14 IOMUX_PAD(0x358, 0xAC, 6, 0x824, 0, NO_PAD_CTRL) - -#define MX50_PAD_UART4_RXD__UART4_RXD IOMUX_PAD(0x35C, 0xB0, 0, 0x7dc, 1, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART4_RXD__GPIO_6_17 IOMUX_PAD(0x35C, 0xB0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_UART4_RXD__UART3_RTS IOMUX_PAD(0x35C, 0xB0, 2, 0x7d0, 1, MX50_UART_PAD_CTRL) -#define MX50_PAD_UART4_RXD__SD1_D7 IOMUX_PAD(0x35C, 0xB0, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART4_RXD__SD4_D3 IOMUX_PAD(0x35C, 0xB0, 4, 0x75c, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART4_RXD__SD1_LCTL IOMUX_PAD(0x35C, 0xB0, 5, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_UART4_RXD__WEIM_D15 IOMUX_PAD(0x35C, 0xB0, 6, 0x828, 0, NO_PAD_CTRL) - -#define MX50_PAD_CSPI_SCLK__CSPI_SCLK IOMUX_PAD(0x360, 0xB4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_CSPI_SCLK__GPIO_4_8 IOMUX_PAD(0x360, 0xB4, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_CSPI_MOSI__CSPI_MOSI IOMUX_PAD(0x364, 0xB8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_CSPI_MOSI__GPIO_4_9 IOMUX_PAD(0x364, 0xB8, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_CSPI_MISO__CSPI_MISO IOMUX_PAD(0x368, 0xBC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_CSPI_MISO__GPIO_4_10 IOMUX_PAD(0x368, 0xBC, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_CSPI_SS0__CSPI_SS0 IOMUX_PAD(0x36C, 0xC0, 0, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_CSPI_SS0__GPIO_4_11 IOMUX_PAD(0x36C, 0xC0, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x370, 0xC4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_SCLK__GPIO_4_12 IOMUX_PAD(0x370, 0xC4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY IOMUX_PAD(0x370, 0xC4, 2, 0x6e8, 1, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY IOMUX_PAD(0x370, 0xC4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_SCLK__UART3_RTS IOMUX_PAD(0x370, 0xC4, 4, 0x7d0, 2, MX50_UART_PAD_CTRL) -#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE6 IOMUX_PAD(0x370, 0xC4, 5, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_SCLK__WEIM_D8 IOMUX_PAD(0x370, 0xC4, 7, 0x80c, 0, NO_PAD_CTRL) - -#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x374, 0xC8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_MOSI__GPIO_4_13 IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1 IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1 IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_MOSI__UART3_CTS IOMUX_PAD(0x374, 0xC8, 4, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7 IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_MOSI__WEIM_D9 IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL) - -#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x378, 0xCC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_MISO__GPIO_4_14 IOMUX_PAD(0x378, 0xCC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_MISO__CSPI_SS2 IOMUX_PAD(0x378, 0xCC, 2, 0x6f0, 1, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2 IOMUX_PAD(0x378, 0xCC, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_MISO__UART4_RTS IOMUX_PAD(0x378, 0xCC, 4, 0x7d8, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE8 IOMUX_PAD(0x378, 0xCC, 5, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_MISO__WEIM_D10 IOMUX_PAD(0x378, 0xCC, 7, 0x814, 0, NO_PAD_CTRL) - -#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x37C, 0xD0, 0, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_SS0__GPIO_4_15 IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX50_PAD_ECSPI1_SS0__CSPI_SS3 IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3 IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI1_SS0__UART4_CTS IOMUX_PAD(0x37C, 0xD0, 4, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9 IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI1_SS0__WEIM_D11 IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL) - -#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK IOMUX_PAD(0x380, 0xD4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_SCLK__GPIO_4_16 IOMUX_PAD(0x380, 0xD4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR IOMUX_PAD(0x380, 0xD4, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY IOMUX_PAD(0x380, 0xD4, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_SCLK__UART5_RTS IOMUX_PAD(0x380, 0xD4, 4, 0x7e0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK IOMUX_PAD(0x380, 0xD4, 5, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_SCLK__NANDF_CEN4 IOMUX_PAD(0x380, 0xD4, 6, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_SCLK__WEIM_D8 IOMUX_PAD(0x380, 0xD4, 7, 0x80c, 1, NO_PAD_CTRL) - -#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI IOMUX_PAD(0x384, 0xD8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MOSI__GPIO_4_17 IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1 IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI2_MOSI__UART5_CTS IOMUX_PAD(0x384, 0xD8, 4, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5 IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MOSI__WEIM_D9 IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL) - -#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO IOMUX_PAD(0x388, 0xDC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MISO__GPIO_4_18 IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2 IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI2_MISO__UART5_TXD IOMUX_PAD(0x388, 0xDC, 4, 0x0, 0, MX50_UART_PAD_CTRL) -#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC IOMUX_PAD(0x388, 0xDC, 5, 0x73c, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MISO__NANDF_CEN6 IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_MISO__WEIM_D10 IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL) - -#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0 IOMUX_PAD(0x38C, 0xE0, 0, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI2_SS0__GPIO_4_19 IOMUX_PAD(0x38C, 0xE0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS IOMUX_PAD(0x38C, 0xE0, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_SS0__ECSPI1_SS3 IOMUX_PAD(0x38C, 0xE0, 3, 0x0, 0, MX50_CSPI_SS_PAD) -#define MX50_PAD_ECSPI2_SS0__UART5_RXD IOMUX_PAD(0x38C, 0xE0, 4, 0x7e4, 5, MX50_UART_PAD_CTRL) -#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC IOMUX_PAD(0x38C, 0xE0, 5, 0x6f8, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_SS0__NANDF_CEN7 IOMUX_PAD(0x38C, 0xE0, 6, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_ECSPI2_SS0__WEIM_D11 IOMUX_PAD(0x38C, 0xE0, 7, 0x818, 1, NO_PAD_CTRL) - -#define MX50_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x390, 0xE4, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD1_CLK__GPIO_5_0 IOMUX_PAD(0x390, 0xE4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD1_CLK__CLKO IOMUX_PAD(0x390, 0xE4, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x394, 0xE8, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD1_CMD__GPIO_5_1 IOMUX_PAD(0x394, 0xE8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD1_CMD__CLKO2 IOMUX_PAD(0x394, 0xE8, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD1_D0__SD1_D0 IOMUX_PAD(0x398, 0xEC, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD1_D0__GPIO_5_2 IOMUX_PAD(0x398, 0xEC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD1_D0__PLL1_BYP IOMUX_PAD(0x398, 0xEC, 7, 0x6dc, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD1_D1__SD1_D1 IOMUX_PAD(0x39C, 0xF0, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD1_D1__GPIO_5_3 IOMUX_PAD(0x39C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD1_D1__PLL2_BYP IOMUX_PAD(0x39C, 0xF0, 7, 0x6e0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD1_D2__SD1_D2 IOMUX_PAD(0x3A0, 0xF4, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD1_D2__GPIO_5_4 IOMUX_PAD(0x3A0, 0xF4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD1_D2__PLL3_BYP IOMUX_PAD(0x3A0, 0xF4, 7, 0x6e4, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD1_D3__SD1_D3 IOMUX_PAD(0x3A4, 0xF8, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD1_D3__GPIO_5_5 IOMUX_PAD(0x3A4, 0xF8, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x3A8, 0xFC, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_CLK__GPIO_5_6 IOMUX_PAD(0x3A8, 0xFC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_CLK__MSHC_SCLK IOMUX_PAD(0x3A8, 0xFC, 2, 0x0, 0, MX50_SD_PAD_CTRL) - -#define MX50_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x3AC, 0x100, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_CMD__GPIO_5_7 IOMUX_PAD(0x3AC, 0x100, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_CMD__MSHC_BS IOMUX_PAD(0x3AC, 0x100, 2, 0x0, 0, MX50_SD_PAD_CTRL) - -#define MX50_PAD_SD2_D0__SD2_D0 IOMUX_PAD(0x3B0, 0x104, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D0__GPIO_5_8 IOMUX_PAD(0x3B0, 0x104, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D0__MSHC_D0 IOMUX_PAD(0x3B0, 0x104, 2, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D0__KEY_COL4 IOMUX_PAD(0x3B0, 0x104, 3, 0x790, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD2_D1__SD2_D1 IOMUX_PAD(0x3B4, 0x108, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D1__GPIO_5_9 IOMUX_PAD(0x3B4, 0x108, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D1__MSHC_D1 IOMUX_PAD(0x3B4, 0x108, 2, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D1__KEY_ROW4 IOMUX_PAD(0x3B4, 0x108, 3, 0x7a0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD2_D2__SD2_D2 IOMUX_PAD(0x3B8, 0x10C, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D2__GPIO_5_10 IOMUX_PAD(0x3B8, 0x10C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D2__MSHC_D2 IOMUX_PAD(0x3B8, 0x10C, 2, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D2__KEY_COL5 IOMUX_PAD(0x3B8, 0x10C, 3, 0x794, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD2_D3__SD2_D3 IOMUX_PAD(0x3BC, 0x110, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D3__GPIO_5_11 IOMUX_PAD(0x3BC, 0x110, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D3__MSHC_D3 IOMUX_PAD(0x3BC, 0x110, 2, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D3__KEY_ROW5 IOMUX_PAD(0x3BC, 0x110, 3, 0x7a4, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD2_D4__SD2_D4 IOMUX_PAD(0x3C0, 0x114, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D4__GPIO_5_12 IOMUX_PAD(0x3C0, 0x114, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D4__AUD4_RXFS IOMUX_PAD(0x3C0, 0x114, 2, 0x6d0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D4__KEY_COL6 IOMUX_PAD(0x3C0, 0x114, 3, 0x798, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D4__WEIM_D0 IOMUX_PAD(0x3C0, 0x114, 4, 0x7ec, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D4__CCM_OUT0 IOMUX_PAD(0x3C0, 0x114, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD2_D5__SD2_D5 IOMUX_PAD(0x3C4, 0x118, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D5__GPIO_5_13 IOMUX_PAD(0x3C4, 0x118, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D5__AUD4_RXC IOMUX_PAD(0x3C4, 0x118, 2, 0x6cc, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D5__KEY_ROW6 IOMUX_PAD(0x3C4, 0x118, 3, 0x7a8, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D5__WEIM_D1 IOMUX_PAD(0x3C4, 0x118, 4, 0x7f0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D5__CCM_OUT1 IOMUX_PAD(0x3C4, 0x118, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD2_D6__SD2_D6 IOMUX_PAD(0x3C8, 0x11C, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D6__GPIO_5_14 IOMUX_PAD(0x3C8, 0x11C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D6__AUD4_RXD IOMUX_PAD(0x3C8, 0x11C, 2, 0x6c4, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D6__KEY_COL7 IOMUX_PAD(0x3C8, 0x11C, 3, 0x79c, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D6__WEIM_D2 IOMUX_PAD(0x3C8, 0x11C, 4, 0x7f4, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D6__CCM_OUT2 IOMUX_PAD(0x3C8, 0x11C, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD2_D7__SD2_D7 IOMUX_PAD(0x3CC, 0x120, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_D7__GPIO_5_15 IOMUX_PAD(0x3CC, 0x120, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D7__AUD4_TXFS IOMUX_PAD(0x3CC, 0x120, 2, 0x6d8, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D7__KEY_ROW7 IOMUX_PAD(0x3CC, 0x120, 3, 0x7ac, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D7__WEIM_D3 IOMUX_PAD(0x3CC, 0x120, 4, 0x7f8, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_D7__CCM_STOP IOMUX_PAD(0x3CC, 0x120, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD2_WP__SD2_WP IOMUX_PAD(0x3D0, 0x124, 0, 0x744, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_WP__GPIO_5_16 IOMUX_PAD(0x3D0, 0x124, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_WP__AUD4_TXD IOMUX_PAD(0x3D0, 0x124, 2, 0x6c8, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_WP__WEIM_D4 IOMUX_PAD(0x3D0, 0x124, 4, 0x7fc, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_WP__CCM_WAIT IOMUX_PAD(0x3D0, 0x124, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD2_CD__SD2_CD IOMUX_PAD(0x3D4, 0x128, 0, 0x740, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD2_CD__GPIO_5_17 IOMUX_PAD(0x3D4, 0x128, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_CD__AUD4_TXC IOMUX_PAD(0x3D4, 0x128, 2, 0x6d4, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_CD__WEIM_D5 IOMUX_PAD(0x3D4, 0x128, 4, 0x800, 0, NO_PAD_CTRL) -#define MX50_PAD_SD2_CD__CCM_REF_EN IOMUX_PAD(0x3D4, 0x128, 7, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x3D8, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x3DC, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_PORT_B__PMIC_PORT_B IOMUX_PAD(0x3E0, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_BOOT_MODE1__PMIC_BOOT_MODE1 IOMUX_PAD(0x3E4, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_RESET_IN_B__PMIC_RESET_IN_B IOMUX_PAD(0x3E8, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_BOOT_MODE0__PMIC_BOOT_MODE0 IOMUX_PAD(0x3EC, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_TEST_MODE__PMIC_TEST_MODE IOMUX_PAD(0x3F0, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_JTAG_TMS__PMIC_JTAG_TMS IOMUX_PAD(0x3F4, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_JTAG_MOD__PMIC_JTAG_MOD IOMUX_PAD(0x3F8, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_JTAG_TRSTB__PMIC_JTAG_TRSTB IOMUX_PAD(0x3FC, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_JTAG_TDI__PMIC_JTAG_TDI IOMUX_PAD(0x400, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_JTAG_TCK__PMIC_JTAG_TCK IOMUX_PAD(0x404, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_PMIC_JTAG_TDO__PMIC_JTAG_TDO IOMUX_PAD(0x408, 0, 0, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D0__DISP_D0 IOMUX_PAD(0x40C, 0x12C, 0, 0x6fc, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D0__GPIO_2_0 IOMUX_PAD(0x40C, 0x12C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D0__FEC_TXCLK IOMUX_PAD(0x40C, 0x12C, 2, 0x78c, 0, PAD_CTL_HYS | PAD_CTL_PKE) - -#define MX50_PAD_DISP_D1__DISP_D1 IOMUX_PAD(0x410, 0x130, 0, 0x700, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D1__GPIO_2_1 IOMUX_PAD(0x410, 0x130, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D1__FEC_RX_ER IOMUX_PAD(0x410, 0x130, 2, 0x788, 0, PAD_CTL_HYS | PAD_CTL_PKE) -#define MX50_PAD_DISP_D1__WEIM_A17 IOMUX_PAD(0x410, 0x130, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D2__DISP_D2 IOMUX_PAD(0x414, 0x134, 0, 0x704, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D2__GPIO_2_2 IOMUX_PAD(0x414, 0x134, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D2__FEC_RX_DV IOMUX_PAD(0x414, 0x134, 2, 0x784, 0, PAD_CTL_HYS | PAD_CTL_PKE) -#define MX50_PAD_DISP_D2__WEIM_A18 IOMUX_PAD(0x414, 0x134, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D3__DISP_D3 IOMUX_PAD(0x418, 0x138, 0, 0x708, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D3__GPIO_2_3 IOMUX_PAD(0x418, 0x138, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D3__FEC_RXD1 IOMUX_PAD(0x418, 0x138, 2, 0x77C, 0, PAD_CTL_HYS | PAD_CTL_PKE) -#define MX50_PAD_DISP_D3__WEIM_A19 IOMUX_PAD(0x418, 0x138, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D3__FEC_COL IOMUX_PAD(0x418, 0x138, 4, 0x770, 1, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D4__DISP_D4 IOMUX_PAD(0x41C, 0x13C, 0, 0x70c, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D4__GPIO_2_4 IOMUX_PAD(0x41C, 0x13C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D4__FEC_RXD0 IOMUX_PAD(0x41C, 0x13C, 2, 0x778, 0, PAD_CTL_HYS | PAD_CTL_PKE) -#define MX50_PAD_DISP_D4__WEIM_A20 IOMUX_PAD(0x41C, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D5__DISP_D5 IOMUX_PAD(0x420, 0x140, 0, 0x710, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D5__GPIO_2_5 IOMUX_PAD(0x420, 0x140, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D5__FEC_TX_EN IOMUX_PAD(0x420, 0x140, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_DISP_D5__WEIM_A21 IOMUX_PAD(0x420, 0x140, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D6__DISP_D6 IOMUX_PAD(0x424, 0x144, 0, 0x714, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D6__GPIO_2_6 IOMUX_PAD(0x424, 0x144, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D6__FEC_TXD1 IOMUX_PAD(0x424, 0x144, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_DISP_D6__WEIM_A22 IOMUX_PAD(0x424, 0x144, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D6__FEC_RX_CLK IOMUX_PAD(0x424, 0x144, 4, 0x780, 1, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D7__DISP_D7 IOMUX_PAD(0x428, 0x148, 0, 0x718, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D7__GPIO_2_7 IOMUX_PAD(0x428, 0x148, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D7__FEC_TXD0 IOMUX_PAD(0x428, 0x148, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_DISP_D7__WEIM_A23 IOMUX_PAD(0x428, 0x148, 3, 0x0, 0, NO_PAD_CTRL) - - -#define MX50_PAD_DISP_WR__ELCDIF_WR IOMUX_PAD(0x42C, 0x14C, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_WR__GPIO_2_16 IOMUX_PAD(0x42C, 0x14C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_WR__ELCDIF_PIXCLK IOMUX_PAD(0x42C, 0x14C, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_WR__WEIM_A24 IOMUX_PAD(0x42C, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_RD__ELCDIF_RD IOMUX_PAD(0x430, 0x150, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_RD__GPIO_2_19 IOMUX_PAD(0x430, 0x150, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_RD__ELCDIF_EN IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_RD__WEIM_A25 IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_RS__ELCDIF_RS IOMUX_PAD(0x434, 0x154, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_RS__GPIO_2_17 IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_RS__ELCDIF_VSYNC IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_RS__WEIM_A26 IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_CS__ELCDIF_CS IOMUX_PAD(0x438, 0x158, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_CS__GPIO_2_21 IOMUX_PAD(0x438, 0x158, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_CS__ELCDIF_HSYNC IOMUX_PAD(0x438, 0x158, 2, 0x6f8, 1, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_CS__WEIM_A27 IOMUX_PAD(0x438, 0x158, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_CS__WEIM_CS3 IOMUX_PAD(0x438, 0x158, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_BUSY__ELCDIF_HSYNC IOMUX_PAD(0x43C, 0x15C, 0, 0x6f8, 2, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_BUSY__GPIO_2_18 IOMUX_PAD(0x43C, 0x15C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_BUSY__WEIM_CS3 IOMUX_PAD(0x43C, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_RESET__ELCDIF_RST IOMUX_PAD(0x440, 0x160, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_RESET__GPIO_2_20 IOMUX_PAD(0x440, 0x160, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_RESET__WEIM_CS3 IOMUX_PAD(0x440, 0x160, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD3_CMD__SD3_CMD IOMUX_PAD(0x444, 0x164, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_CMD__GPIO_5_18 IOMUX_PAD(0x444, 0x164, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_CMD__NANDF_WRN IOMUX_PAD(0x444, 0x164, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_CMD__SSP_CMD IOMUX_PAD(0x444, 0x164, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD3_CLK__SD3_CLK IOMUX_PAD(0x448, 0x168, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_CLK__GPIO_5_19 IOMUX_PAD(0x448, 0x168, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_CLK__NANDF_RDN IOMUX_PAD(0x448, 0x168, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_CLK__SSP_CLK IOMUX_PAD(0x448, 0x168, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD3_D0__SD3_D0 IOMUX_PAD(0x44C, 0x16C, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_D0__GPIO_5_20 IOMUX_PAD(0x44C, 0x16C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_D0__NANDF_D4 IOMUX_PAD(0x44C, 0x16C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_D0__SSP_D0 IOMUX_PAD(0x44C, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD3_D0__PLL1_BYP IOMUX_PAD(0x44C, 0x16C, 7, 0x6dc, 1, NO_PAD_CTRL) - -#define MX50_PAD_SD3_D1__SD3_D1 IOMUX_PAD(0x450, 0x170, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_D1__GPIO_5_21 IOMUX_PAD(0x450, 0x170, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_D1__NANDF_D5 IOMUX_PAD(0x450, 0x170, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_D1__PLL2_BYP IOMUX_PAD(0x450, 0x170, 7, 0x6e0, 1, NO_PAD_CTRL) - -#define MX50_PAD_SD3_D2__SD3_D2 IOMUX_PAD(0x454, 0x174, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_D2__GPIO_5_22 IOMUX_PAD(0x454, 0x174, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_D2__NANDF_D6 IOMUX_PAD(0x454, 0x174, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_D2__SSP_D2 IOMUX_PAD(0x454, 0x174, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD3_D2__PLL3_BYP IOMUX_PAD(0x454, 0x174, 7, 0x6e4, 1, NO_PAD_CTRL) - -#define MX50_PAD_SD3_D3__SD3_D3 IOMUX_PAD(0x458, 0x178, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_D3__GPIO_5_23 IOMUX_PAD(0x458, 0x178, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_D3__NANDF_D7 IOMUX_PAD(0x458, 0x178, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_D3__SSP_D3 IOMUX_PAD(0x458, 0x178, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD3_D4__SD3_D4 IOMUX_PAD(0x45C, 0x17C, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_D4__GPIO_5_24 IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_D4__NANDF_D0 IOMUX_PAD(0x45C, 0x17C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_D4__SSP_D4 IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD3_D5__SD3_D5 IOMUX_PAD(0x460, 0x180, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_D5__GPIO_5_25 IOMUX_PAD(0x460, 0x180, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_D5__NANDF_D1 IOMUX_PAD(0x460, 0x180, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_D5__SSP_D5 IOMUX_PAD(0x460, 0x180, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD3_D6__SD3_D6 IOMUX_PAD(0x464, 0x184, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_D6__GPIO_5_26 IOMUX_PAD(0x464, 0x184, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_D6__NANDF_D2 IOMUX_PAD(0x464, 0x184, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_D6__SSP_D6 IOMUX_PAD(0x464, 0x184, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD3_D7__SD3_D7 IOMUX_PAD(0x468, 0x188, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_D7__GPIO_5_27 IOMUX_PAD(0x468, 0x188, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_D7__NANDF_D3 IOMUX_PAD(0x468, 0x188, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_D7__SSP_D7 IOMUX_PAD(0x468, 0x188, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_SD3_WP__SD3_WP IOMUX_PAD(0x46C, 0x18C, 0, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_WP__GPIO_5_28 IOMUX_PAD(0x46C, 0x18C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_SD3_WP__NANDF_RESETN IOMUX_PAD(0x46C, 0x18C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_SD3_WP__SSP_CD IOMUX_PAD(0x46C, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_SD3_WP__SD4_LCTL IOMUX_PAD(0x46C, 0x18C, 4, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_SD3_WP__WEIM_CS3 IOMUX_PAD(0x46C, 0x18C, 5, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D8__DISP_D8 IOMUX_PAD(0x470, 0x190, 0, 0x71c, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D8__GPIO_2_8 IOMUX_PAD(0x470, 0x190, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D8__NANDF_CLE IOMUX_PAD(0x470, 0x190, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D8__SD1_LCTL IOMUX_PAD(0x470, 0x190, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D8__SD4_CMD IOMUX_PAD(0x470, 0x190, 4, 0x74c, 2, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D8__KEY_COL4 IOMUX_PAD(0x470, 0x190, 5, 0x790, 1, NO_PAD_CTRL) -#define MX50_PAD_DISP_D8__FEC_TX_CLK IOMUX_PAD(0x470, 0x190, 6, 0x78c, 1, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D9__DISP_D9 IOMUX_PAD(0x474, 0x194, 0, 0x720, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D9__GPIO_2_9 IOMUX_PAD(0x474, 0x194, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D9__NANDF_ALE IOMUX_PAD(0x474, 0x194, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D9__SD2_LCTL IOMUX_PAD(0x474, 0x194, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D9__SD4_CLK IOMUX_PAD(0x474, 0x194, 4, 0x748, 2, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D9__KEY_ROW4 IOMUX_PAD(0x474, 0x194, 5, 0x7a0, 1, NO_PAD_CTRL) -#define MX50_PAD_DISP_D9__FEC_RX_ER IOMUX_PAD(0x474, 0x194, 6, 0x788, 1, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D10__DISP_D10 IOMUX_PAD(0x478, 0x198, 0, 0x724, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D10__GPIO_2_10 IOMUX_PAD(0x478, 0x198, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D10__NANDF_CEN0 IOMUX_PAD(0x478, 0x198, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D10__SD3_LCTL IOMUX_PAD(0x478, 0x198, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D10__SD4_D0 IOMUX_PAD(0x478, 0x198, 4, 0x750, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D10__KEY_COL5 IOMUX_PAD(0x478, 0x198, 5, 0x794, 1, NO_PAD_CTRL) -#define MX50_PAD_DISP_D10__FEC_RX_DV IOMUX_PAD(0x478, 0x198, 6, 0x784, 1, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D11__DISP_D11 IOMUX_PAD(0x47C, 0x19C, 0, 0x728, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D11__GPIO_2_11 IOMUX_PAD(0x47C, 0x19C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D11__NANDF_CEN1 IOMUX_PAD(0x47C, 0x19C, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D11__SD4_D1 IOMUX_PAD(0x47C, 0x19C, 4, 0x754, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D11__KEY_ROW5 IOMUX_PAD(0x47C, 0x19C, 5, 0x7a4, 1, NO_PAD_CTRL) -#define MX50_PAD_DISP_D11__FEC_RDAT1 IOMUX_PAD(0x47C, 0x19C, 6, 0x77c, 1, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D12__DISP_D12 IOMUX_PAD(0x480, 0x1A0, 0, 0x72c, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D12__GPIO_2_12 IOMUX_PAD(0x480, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D12__NANDF_CEN2 IOMUX_PAD(0x480, 0x1A0, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D12__SD1_CD IOMUX_PAD(0x480, 0x1A0, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D12__SD4_D2 IOMUX_PAD(0x480, 0x1A0, 4, 0x758, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D12__KEY_COL6 IOMUX_PAD(0x480, 0x1A0, 5, 0x798, 1, NO_PAD_CTRL) -#define MX50_PAD_DISP_D12__FEC_RDAT0 IOMUX_PAD(0x480, 0x1A0, 6, 0x778, 1, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D13__DISP_D13 IOMUX_PAD(0x484, 0x1A4, 0, 0x730, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D13__GPIO_2_13 IOMUX_PAD(0x484, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D13__NANDF_CEN3 IOMUX_PAD(0x484, 0x1A4, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D13__SD3_CD IOMUX_PAD(0x484, 0x1A4, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D13__SD4_D3 IOMUX_PAD(0x484, 0x1A4, 4, 0x75c, 1, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D13__KEY_ROW6 IOMUX_PAD(0x484, 0x1A4, 5, 0x7a8, 1, NO_PAD_CTRL) -#define MX50_PAD_DISP_D13__FEC_TX_EN IOMUX_PAD(0x484, 0x1A4, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D14__DISP_D14 IOMUX_PAD(0x488, 0x1A8, 0, 0x734, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D14__GPIO_2_14 IOMUX_PAD(0x488, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D14__NANDF_RDY0 IOMUX_PAD(0x488, 0x1A8, 2, 0x7b4, 1, NO_PAD_CTRL) -#define MX50_PAD_DISP_D14__SD1_WP IOMUX_PAD(0x488, 0x1A8, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D14__SD4_WP IOMUX_PAD(0x488, 0x1A8, 4, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D14__KEY_COL7 IOMUX_PAD(0x488, 0x1A8, 5, 0x79c, 1, NO_PAD_CTRL) -#define MX50_PAD_DISP_D14__FEC_TDAT1 IOMUX_PAD(0x488, 0x1A8, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_DISP_D15__DISP_D15 IOMUX_PAD(0x48C, 0x1AC, 0, 0x738, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_DISP_D15__GPIO_2_15 IOMUX_PAD(0x48C, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_DISP_D15__NANDF_DQS IOMUX_PAD(0x48C, 0x1AC, 2, 0x7b0, 1, NO_PAD_CTRL) -#define MX50_PAD_DISP_D15__SD3_RST IOMUX_PAD(0x48C, 0x1AC, 3, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D15__SD4_CD IOMUX_PAD(0x48C, 0x1AC, 4, 0x0, 0, MX50_SD_PAD_CTRL) -#define MX50_PAD_DISP_D15__KEY_ROW7 IOMUX_PAD(0x48C, 0x1AC, 5, 0x7ac, 1, NO_PAD_CTRL) -#define MX50_PAD_DISP_D15__FEC_TDAT0 IOMUX_PAD(0x48C, 0x1AC, 6, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_D0__EPDC_D0 IOMUX_PAD(0x54C, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D0__GPIO_3_0 IOMUX_PAD(0x54C, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D0__WEIM_D0 IOMUX_PAD(0x54C, 0x1B0, 2, 0x7ec, 1, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D0__ELCDIF_RS IOMUX_PAD(0x54C, 0x1B0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_D0__ELCDIF_PIXCLK IOMUX_PAD(0x54C, 0x1B0, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_D1__EPDC_D1 IOMUX_PAD(0x550, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D1__GPIO_3_1 IOMUX_PAD(0x550, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D1__WEIM_D1 IOMUX_PAD(0x550, 0x1B4, 2, 0x7f0, 1, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D1__ELCDIF_CS IOMUX_PAD(0x550, 0x1B4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_D1__ELCDIF_EN IOMUX_PAD(0x550, 0x1B4, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_D2__EPDC_D2 IOMUX_PAD(0x554, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D2__GPIO_3_2 IOMUX_PAD(0x554, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D2__WEIM_D2 IOMUX_PAD(0x554, 0x1B8, 2, 0x7f4, 1, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D2__ELCDIF_WR IOMUX_PAD(0x554, 0x1B8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC IOMUX_PAD(0x554, 0x1B8, 4, 0x73c, 2, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_D3__EPDC_D3 IOMUX_PAD(0x558, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D3__GPIO_3_3 IOMUX_PAD(0x558, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D3__WEIM_D3 IOMUX_PAD(0x558, 0x1BC, 2, 0x7f8, 1, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D3__ELCDIF_RD IOMUX_PAD(0x558, 0x1BC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC IOMUX_PAD(0x558, 0x1BC, 4, 0x6f8, 3, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_D4__EPDC_D4 IOMUX_PAD(0x55C, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D4__GPIO_3_4 IOMUX_PAD(0x55C, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D4__WEIM_D4 IOMUX_PAD(0x55C, 0x1C0, 2, 0x7fc, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_D5__EPDC_D5 IOMUX_PAD(0x560, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D5__GPIO_3_5 IOMUX_PAD(0x560, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D5__WEIM_D5 IOMUX_PAD(0x560, 0x1C4, 2, 0x800, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_D6__EPDC_D6 IOMUX_PAD(0x564, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D6__GPIO_3_6 IOMUX_PAD(0x564, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D6__WEIM_D6 IOMUX_PAD(0x564, 0x1C8, 2, 0x804, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_D7__EPDC_D7 IOMUX_PAD(0x568, 0x1CC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D7__GPIO_3_7 IOMUX_PAD(0x568, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D7__WEIM_D7 IOMUX_PAD(0x568, 0x1CC, 2, 0x808, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_D8__EPDC_D8 IOMUX_PAD(0x56C, 0x1D0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D8__GPIO_3_8 IOMUX_PAD(0x56C, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D8__WEIM_D8 IOMUX_PAD(0x56C, 0x1D0, 2, 0x80c, 2, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D8__ELCDIF_D24 IOMUX_PAD(0x56C, 0x1D0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_D9__EPDC_D9 IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D9__GPIO_3_9 IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D9__WEIM_D9 IOMUX_PAD(0x570, 0x1D4, 2, 0x810, 2, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D9__ELCDIF_D25 IOMUX_PAD(0x570, 0x1D4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_D10__EPDC_D10 IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D10__GPIO_3_10 IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D10__WEIM_D10 IOMUX_PAD(0x574, 0x1D8, 2, 0x814, 2, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D10__ELCDIF_D26 IOMUX_PAD(0x574, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_D11__EPDC_D11 IOMUX_PAD(0x578, 0x1DC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D11__GPIO_3_11 IOMUX_PAD(0x578, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D11__WEIM_D11 IOMUX_PAD(0x578, 0x1DC, 2, 0x818, 2, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D11__ELCDIF_D27 IOMUX_PAD(0x578, 0x1DC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_D12__EPDC_D12 IOMUX_PAD(0x57C, 0x1E0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D12__GPIO_3_12 IOMUX_PAD(0x57C, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D12__WEIM_D12 IOMUX_PAD(0x57C, 0x1E0, 2, 0x81c, 1, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D12__ELCDIF_D28 IOMUX_PAD(0x57C, 0x1E0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_D13__EPDC_D13 IOMUX_PAD(0x580, 0x1E4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D13__GPIO_3_13 IOMUX_PAD(0x580, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D13__WEIM_D13 IOMUX_PAD(0x580, 0x1E4, 2, 0x820, 1, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D13__ELCDIF_D29 IOMUX_PAD(0x580, 0x1E4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_D14__EPDC_D14 IOMUX_PAD(0x584, 0x1E8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D14__GPIO_3_14 IOMUX_PAD(0x584, 0x1E8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D14__WEIM_D14 IOMUX_PAD(0x584, 0x1E8, 2, 0x824, 1, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D14__ELCDIF_D30 IOMUX_PAD(0x584, 0x1E8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_D14__AUD6_TXD IOMUX_PAD(0x584, 0x1E8, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_D15__EPDC_D15 IOMUX_PAD(0x588, 0x1EC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D15__GPIO_3_15 IOMUX_PAD(0x588, 0x1EC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D15__WEIM_D15 IOMUX_PAD(0x588, 0x1EC, 2, 0x828, 1, NO_PAD_CTRL) -#define MX50_PAD_EPDC_D15__ELCDIF_D31 IOMUX_PAD(0x588, 0x1EC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_D15__AUD6_TXC IOMUX_PAD(0x588, 0x1EC, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK IOMUX_PAD(0x58C, 0x1F0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDCLK__GPIO_3_16 IOMUX_PAD(0x58C, 0x1F0, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDCLK__WEIM_D16 IOMUX_PAD(0x58C, 0x1F0, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDCLK__ELCDIF_D16 IOMUX_PAD(0x58C, 0x1F0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_GDCLK__AUD6_TXFS IOMUX_PAD(0x58C, 0x1F0, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_GDSP__EPDC_GDSP IOMUX_PAD(0x590, 0x1F4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDSP__GPIO_3_17 IOMUX_PAD(0x590, 0x1F4, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDSP__WEIM_D17 IOMUX_PAD(0x590, 0x1F4, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDSP__ELCDIF_D17 IOMUX_PAD(0x590, 0x1F4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_GDSP__AUD6_RXD IOMUX_PAD(0x590, 0x1F4, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_GDOE__EPDC_GDOE IOMUX_PAD(0x594, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDOE__GPIO_3_18 IOMUX_PAD(0x594, 0x1F8, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDOE__WEIM_D18 IOMUX_PAD(0x594, 0x1F8, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDOE__ELCDIF_D18 IOMUX_PAD(0x594, 0x1F8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_GDOE__AUD6_RXC IOMUX_PAD(0x594, 0x1F8, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_GDRL__EPDC_GDRL IOMUX_PAD(0x598, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDRL__GPIO_3_19 IOMUX_PAD(0x598, 0x1FC, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDRL__WEIM_D19 IOMUX_PAD(0x598, 0x1FC, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_GDRL__ELCDIF_D19 IOMUX_PAD(0x598, 0x1FC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_GDRL__AUD6_RXFS IOMUX_PAD(0x598, 0x1FC, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_SDCLK__EPDC_SDCLK IOMUX_PAD(0x59C, 0x200, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCLK__GPIO_3_20 IOMUX_PAD(0x59C, 0x200, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCLK__WEIM_D20 IOMUX_PAD(0x59C, 0x200, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCLK__ELCDIF_D20 IOMUX_PAD(0x59C, 0x200, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_SDCLK__AUD5_TXD IOMUX_PAD(0x59C, 0x200, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_SDOEZ__EPDC_SDOEZ IOMUX_PAD(0x5A0, 0x204, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDOEZ__GPIO_3_21 IOMUX_PAD(0x5A0, 0x204, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDOEZ__WEIM_D21 IOMUX_PAD(0x5A0, 0x204, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDOEZ__ELCDIF_D21 IOMUX_PAD(0x5A0, 0x204, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_SDOEZ__AUD5_TXC IOMUX_PAD(0x5A0, 0x204, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_SDOED__EPDC_SDOED IOMUX_PAD(0x5A4, 0x208, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDOED__GPIO_3_22 IOMUX_PAD(0x5A4, 0x208, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDOED__WEIM_D22 IOMUX_PAD(0x5A4, 0x208, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDOED__ELCDIF_D22 IOMUX_PAD(0x5A4, 0x208, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_SDOED__AUD5_TXFS IOMUX_PAD(0x5A4, 0x208, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_SDOE__EPDC_SDOE IOMUX_PAD(0x5A8, 0x20C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDOE__GPIO_3_23 IOMUX_PAD(0x5A8, 0x20C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDOE__WEIM_D23 IOMUX_PAD(0x5A8, 0x20C, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDOE__ELCDIF_D23 IOMUX_PAD(0x5A8, 0x20C, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_SDOE__AUD5_RXD IOMUX_PAD(0x5A8, 0x20C, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_SDLE__EPDC_SDLE IOMUX_PAD(0x5AC, 0x210, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDLE__GPIO_3_24 IOMUX_PAD(0x5AC, 0x210, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDLE__WEIM_D24 IOMUX_PAD(0x5AC, 0x210, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDLE__ELCDIF_D8 IOMUX_PAD(0x5AC, 0x210, 3, 0x71c, 1, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_SDLE__AUD5_RXC IOMUX_PAD(0x5AC, 0x210, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_SDCLKN__EPDC_SDCLKN IOMUX_PAD(0x5B0, 0x214, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCLKN__GPIO_3_25 IOMUX_PAD(0x5B0, 0x214, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCLKN__WEIM_D25 IOMUX_PAD(0x5B0, 0x214, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCLKN__ELCDIF_D9 IOMUX_PAD(0x5B0, 0x214, 3, 0x720, 1, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_SDCLKN__AUD5_RXFS IOMUX_PAD(0x5B0, 0x214, 4, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_SDSHR__EPDC_SDSHR IOMUX_PAD(0x5B4, 0x218, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDSHR__GPIO_3_26 IOMUX_PAD(0x5B4, 0x218, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDSHR__WEIM_D26 IOMUX_PAD(0x5B4, 0x218, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDSHR__ELCDIF_D10 IOMUX_PAD(0x5B4, 0x218, 3, 0x724, 1, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_SDSHR__AUD4_TXD IOMUX_PAD(0x5B4, 0x218, 4, 0x6c8, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_PWRCOM__EPDC_PWRCOM IOMUX_PAD(0x5B8, 0x21C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCOM__GPIO_3_27 IOMUX_PAD(0x5B8, 0x21C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCOM__WEIM_D27 IOMUX_PAD(0x5B8, 0x21C, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCOM__ELCDIF_D11 IOMUX_PAD(0x5B8, 0x21C, 3, 0x728, 1, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCOM__AUD4_TXC IOMUX_PAD(0x5B8, 0x21C, 4, 0x6d4, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_PWRSTAT__EPDC_PWRSTAT IOMUX_PAD(0x5BC, 0x220, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRSTAT__GPIO_3_28 IOMUX_PAD(0x5BC, 0x220, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRSTAT__WEIM_D28 IOMUX_PAD(0x5BC, 0x220, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_D12 IOMUX_PAD(0x5BC, 0x220, 3, 0x72c, 1, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_PWRSTAT__AUD4_TXFS IOMUX_PAD(0x5BC, 0x220, 4, 0x6d8, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_PWRCTRL0__EPDC_PWRCTRL0 IOMUX_PAD(0x5C0, 0x224, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL0__GPIO_3_29 IOMUX_PAD(0x5C0, 0x224, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL0__WEIM_D29 IOMUX_PAD(0x5C0, 0x224, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_D13 IOMUX_PAD(0x5C0, 0x224, 3, 0x730, 1, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL0__AUD4_RXD IOMUX_PAD(0x5C0, 0x224, 4, 0x6c4, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_PWRCTRL1__EPDC_PWRCTRL1 IOMUX_PAD(0x5C4, 0x228, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL1__GPIO_3_30 IOMUX_PAD(0x5C4, 0x228, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL1__WEIM_D30 IOMUX_PAD(0x5C4, 0x228, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_D14 IOMUX_PAD(0x5C4, 0x228, 3, 0x734, 1, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL1__AUD4_RXC IOMUX_PAD(0x5C4, 0x228, 4, 0x6cc, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_PWRCTRL2__EPDC_PWRCTRL2 IOMUX_PAD(0x5C8, 0x22C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL2__GPIO_3_31 IOMUX_PAD(0x5C8, 0x22C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL2__WEIM_D31 IOMUX_PAD(0x5C8, 0x22C, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_D15 IOMUX_PAD(0x5C8, 0x22C, 3, 0x738, 1, MX50_ELCDIF_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL2__AUD4_RXFS IOMUX_PAD(0x5C8, 0x22C, 4, 0x6d0, 1, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT0 IOMUX_PAD(0x5C8, 0x22C, 6, 0x7b8, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_PWRCTRL3__PWRCTRL3 IOMUX_PAD(0x5CC, 0x230, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL3__GPIO_4_20 IOMUX_PAD(0x5CC, 0x230, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL3__WEIM_EB2 IOMUX_PAD(0x5CC, 0x230, 2, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT1 IOMUX_PAD(0x5CC, 0x230, 6, 0x7bc, 1, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_VCOM0__EPDC_VCOM0 IOMUX_PAD(0x5D0, 0x234, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_VCOM0__GPIO_4_21 IOMUX_PAD(0x5D0, 0x234, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_VCOM0__WEIM_EB3 IOMUX_PAD(0x5D0, 0x234, 2, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_VCOM1__EPDC_VCOM1 IOMUX_PAD(0x5D4, 0x238, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_VCOM1__GPIO_4_22 IOMUX_PAD(0x5D4, 0x238, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_VCOM1__WEIM_CS3 IOMUX_PAD(0x5D4, 0x238, 2, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EPDC_BDR0__EPDC_BDR0 IOMUX_PAD(0x5D8, 0x23C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_BDR0__GPIO_4_23 IOMUX_PAD(0x5D8, 0x23C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_BDR0__ELCDIF_D7 IOMUX_PAD(0x5D8, 0x23C, 3, 0x718, 1, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_BDR1__EPDC_BDR1 IOMUX_PAD(0x5DC, 0x240, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_BDR1__GPIO_4_24 IOMUX_PAD(0x5DC, 0x240, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_BDR1__ELCDIF_D6 IOMUX_PAD(0x5DC, 0x240, 3, 0x714, 1, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_SDCE0__EPDC_SDCE0 IOMUX_PAD(0x5E0, 0x244, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE0__GPIO_4_25 IOMUX_PAD(0x5E0, 0x244, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE0__ELCDIF_D5 IOMUX_PAD(0x5E0, 0x244, 3, 0x710, 1, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_SDCE1__EPDC_SDCE1 IOMUX_PAD(0x5E4, 0x248, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE1__GPIO_4_26 IOMUX_PAD(0x5E4, 0x248, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE1__ELCDIF_D4 IOMUX_PAD(0x5E4, 0x248, 2, 0x70c, 1, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_SDCE2__EPDC_SDCE2 IOMUX_PAD(0x5E8, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE2__GPIO_4_27 IOMUX_PAD(0x5E8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT3 IOMUX_PAD(0x5E8, 0x24C, 3, 0x708, 1, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_SDCE3__EPDC_SDCE3 IOMUX_PAD(0x5EC, 0x250, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE3__GPIO_4_28 IOMUX_PAD(0x5EC, 0x250, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE3__ELCDIF_D2 IOMUX_PAD(0x5EC, 0x250, 3, 0x704, 1, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_SDCE4__EPDC_SDCE4 IOMUX_PAD(0x5F0, 0x254, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE4__GPIO_4_29 IOMUX_PAD(0x5F0, 0x254, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE4__ELCDIF_D1 IOMUX_PAD(0x5F0, 0x254, 3, 0x700, 1, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EPDC_SDCE5__EPDC_SDCE5 IOMUX_PAD(0x5F4, 0x258, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE5__GPIO_4_30 IOMUX_PAD(0x5F4, 0x258, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EPDC_SDCE5__ELCDIF_D0 IOMUX_PAD(0x5F4, 0x258, 3, 0x6fc, 1, MX50_ELCDIF_PAD_CTRL) - -#define MX50_PAD_EIM_DA0__WEIM_A0 IOMUX_PAD(0x5F8, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA0__GPIO_1_0 IOMUX_PAD(0x5F8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA0__KEY_COL4 IOMUX_PAD(0x5f8, 0x25C, 3, 0x790, 2, NO_PAD_CTRL) - -#define MX50_PAD_EIM_DA1__WEIM_A1 IOMUX_PAD(0x5FC, 0x260, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA1__GPIO_1_1 IOMUX_PAD(0x5FC, 0x260, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA1__KEY_ROW4 IOMUX_PAD(0x5fc, 0x260, 3, 0x7a0, 2, MX50_KEYPAD_CTRL) - -#define MX50_PAD_EIM_DA2__WEIM_A2 IOMUX_PAD(0x600, 0x264, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA2__GPIO_1_2 IOMUX_PAD(0x600, 0x264, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA2__KEY_COL5 IOMUX_PAD(0x600, 0x264, 3, 0x794, 2, NO_PAD_CTRL) - -#define MX50_PAD_EIM_DA3__WEIM_A3 IOMUX_PAD(0x604, 0x268, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA3__GPIO_1_3 IOMUX_PAD(0x604, 0x268, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA3__KEY_ROW5 IOMUX_PAD(0x604, 0x268, 3, 0x7a4, 2, MX50_KEYPAD_CTRL) - -#define MX50_PAD_EIM_DA4__WEIM_A4 IOMUX_PAD(0x608, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA4__GPIO_1_4 IOMUX_PAD(0x608, 0x26C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA4__KEY_COL6 IOMUX_PAD(0x608, 0x26C, 3, 0x798, 2, NO_PAD_CTRL) - -#define MX50_PAD_EIM_DA5__WEIM_A5 IOMUX_PAD(0x60C, 0x270, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA5__GPIO_1_5 IOMUX_PAD(0x60C, 0x270, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA5__KEY_ROW6 IOMUX_PAD(0x60C, 0x270, 3, 0x7a8, 2, MX50_KEYPAD_CTRL) - -#define MX50_PAD_EIM_DA6__WEIM_A6 IOMUX_PAD(0x610, 0x274, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA6__GPIO_1_6 IOMUX_PAD(0x610, 0x274, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA6__KEY_COL7 IOMUX_PAD(0x610, 0x274, 3, 0x79c, 2, NO_PAD_CTRL) - -#define MX50_PAD_EIM_DA7__WEIM_A7 IOMUX_PAD(0x614, 0x278, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA7__GPIO_1_7 IOMUX_PAD(0x614, 0x278, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA7__KEY_ROW7 IOMUX_PAD(0x614, 0x278, 3, 0x7ac, 2, MX50_KEYPAD_CTRL) - -#define MX50_PAD_EIM_DA8__WEIM_A8 IOMUX_PAD(0x618, 0x27C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA8__GPIO_1_8 IOMUX_PAD(0x618, 0x27C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_EIM_DA8__NANDF_CLE IOMUX_PAD(0x618, 0x27C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_EIM_DA9__WEIM_A9 IOMUX_PAD(0x61C, 0x280, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA9__GPIO_1_9 IOMUX_PAD(0x61C, 0x280, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_EIM_DA9__NANDF_ALE IOMUX_PAD(0x61C, 0x280, 2, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_EIM_DA10__WEIM_A10 IOMUX_PAD(0x620, 0x284, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA10__GPIO_1_10 IOMUX_PAD(0x620, 0x284, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_EIM_DA10__NANDF_CE0 IOMUX_PAD(0x620, 0x284, 2, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_EIM_DA11__WEIM_A11 IOMUX_PAD(0x624, 0x288, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA11__GPIO_1_11 IOMUX_PAD(0x624, 0x288, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_EIM_DA11__NANDF_CE1 IOMUX_PAD(0x624, 0x288, 2, 0x0, 0, PAD_CTL_DSE_HIGH) - -#define MX50_PAD_EIM_DA12__WEIM_A12 IOMUX_PAD(0x628, 0x28C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA12__GPIO_1_12 IOMUX_PAD(0x628, 0x28C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_EIM_DA12__NANDF_CE2 IOMUX_PAD(0x628, 0x28C, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PAD_EIM_DA12__EPDC_SDCE6 IOMUX_PAD(0x628, 0x28C, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_DA13__WEIM_A13 IOMUX_PAD(0x62C, 0x290, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA13__GPIO_1_13 IOMUX_PAD(0x62C, 0x290, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_EIM_DA13__NANDF_CE3 IOMUX_PAD(0x62C, 0x290, 2, 0x0, 0, PAD_CTL_DSE_HIGH) -#define MX50_PIN_EIM_DA13__EPDC_SDCE7 IOMUX_PAD(0x62C, 0x290, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_DA14__WEIM_A14 IOMUX_PAD(0x630, 0x294, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA14__GPIO_1_14 IOMUX_PAD(0x630, 0x294, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA14__NANDF_READY IOMUX_PAD(0x630, 0x294, 2, 0x7B4, 2, PAD_CTL_PKE | \ - PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) -#define MX50_PAD_EIM_DA14__EPDC_SDCE8 IOMUX_PAD(0x630, 0x294, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_DA15__WEIM_A15 IOMUX_PAD(0x634, 0x298, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_DA15__GPIO_1_15 IOMUX_PAD(0x634, 0x298, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PIN_EIM_DA15__NANDF_DQS IOMUX_PAD(0x634, 0x298, 2, 0x7B0, 2, PAD_CTL_DSE_HIGH) -#define MX50_PAD_EIM_DA15__EPDC_SDCE9 IOMUX_PAD(0x634, 0x298, 3, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_CS2__WEIM_CS2 IOMUX_PAD(0x638, 0x29C, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_CS2__GPIO_1_16 IOMUX_PAD(0x638, 0x29C, 1, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_CS2__WEIM_A27 IOMUX_PAD(0x638, 0x29C, 2, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_CS1__WEIM_CS1 IOMUX_PAD(0x63C, 0x2A0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_CS1__GPIO_1_17 IOMUX_PAD(0x63C, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_CS0__WEIM_CS0 IOMUX_PAD(0x640, 0x2A4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_CS0__GPIO_1_18 IOMUX_PAD(0x640, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_EB0__WEIM_EB0 IOMUX_PAD(0x644, 0x2A8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_EB0__GPIO_1_19 IOMUX_PAD(0x644, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_EB1__WEIM_EB1 IOMUX_PAD(0x648, 0x2AC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_EB1__GPIO_1_20 IOMUX_PAD(0x648, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_WAIT__WEIM_WAIT IOMUX_PAD(0x64C, 0x2B0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_WAIT__GPIO_1_21 IOMUX_PAD(0x64C, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_BCLK__WEIM_BCLK IOMUX_PAD(0x650, 0x2B4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_BCLK__GPIO_1_22 IOMUX_PAD(0x650, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_RDY__WEIM_RDY IOMUX_PAD(0x654, 0x2B8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_RDY__GPIO_1_23 IOMUX_PAD(0x654, 0x2B8, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_OE__WEIM_OE IOMUX_PAD(0x658, 0x2BC, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_OE__GPIO_1_24 IOMUX_PAD(0x658, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_RW__WEIM_RW IOMUX_PAD(0x65C, 0x2C0, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_RW__GPIO_1_25 IOMUX_PAD(0x65C, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_LBA__WEIM_LBA IOMUX_PAD(0x660, 0x2C4, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_LBA__GPIO_1_26 IOMUX_PAD(0x660, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL) - -#define MX50_PAD_EIM_CRE__WEIM_CRE IOMUX_PAD(0x664, 0x2C8, 0, 0x0, 0, NO_PAD_CTRL) -#define MX50_PAD_EIM_CRE__GPIO_1_27 IOMUX_PAD(0x664, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL) - -#endif /* __MACH_IOMUX_MX50_H__ */ diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c deleted file mode 100644 index 2fdc9bf..0000000 --- a/arch/arm/mach-imx/lluart.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <asm/page.h> -#include <asm/sizes.h> -#include <asm/mach/map.h> - -#include "hardware.h" - -#define IMX6Q_UART1_BASE_ADDR 0x02020000 -#define IMX6Q_UART2_BASE_ADDR 0x021e8000 -#define IMX6Q_UART3_BASE_ADDR 0x021ec000 -#define IMX6Q_UART4_BASE_ADDR 0x021f0000 -#define IMX6Q_UART5_BASE_ADDR 0x021f4000 - -/* - * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion - * of IMX6Q_UART##n##_BASE_ADDR. - */ -#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR -#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n) -#define IMX6Q_DEBUG_UART_BASE IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT) - -static struct map_desc imx_lluart_desc = { -#ifdef CONFIG_DEBUG_IMX6Q_UART - .virtual = IMX_IO_P2V(IMX6Q_DEBUG_UART_BASE), - .pfn = __phys_to_pfn(IMX6Q_DEBUG_UART_BASE), - .length = 0x4000, - .type = MT_DEVICE, -#endif -}; - -void __init imx_lluart_map_io(void) -{ - if (imx_lluart_desc.virtual) - iotable_init(&imx_lluart_desc, 1); -} diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 5c9bd2c..067580b 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -137,17 +137,13 @@ static void __init apf9328_timer_init(void) mx1_clocks_init(32768); } -static struct sys_timer apf9328_timer = { - .init = apf9328_timer_init, -}; - MACHINE_START(APF9328, "Armadeus APF9328") /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */ .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, .handle_irq = imx1_handle_irq, - .timer = &apf9328_timer, + .init_time = apf9328_timer_init, .init_machine = apf9328_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 59bd6b0..368a6e3 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -557,10 +557,6 @@ static void __init armadillo5x0_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer armadillo5x0_timer = { - .init = armadillo5x0_timer_init, -}; - MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ .atag_offset = 0x100, @@ -568,7 +564,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, - .timer = &armadillo5x0_timer, + .init_time = armadillo5x0_timer_init, .init_machine = armadillo5x0_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 3a39d5a..2d00476 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -53,16 +53,12 @@ static void __init bug_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer bug_timer = { - .init = bug_timer_init, -}; - MACHINE_START(BUG, "BugLabs BUGBase") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, - .timer = &bug_timer, + .init_time = bug_timer_init, .init_machine = bug_board_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 12a3706..1465593 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -309,17 +309,13 @@ static void __init eukrea_cpuimx27_timer_init(void) mx27_clocks_init(26000000); } -static struct sys_timer eukrea_cpuimx27_timer = { - .init = eukrea_cpuimx27_timer_init, -}; - MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, .handle_irq = imx27_handle_irq, - .timer = &eukrea_cpuimx27_timer, + .init_time = eukrea_cpuimx27_timer_init, .init_machine = eukrea_cpuimx27_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 5a31bf8..771362d 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -193,10 +193,6 @@ static void __init eukrea_cpuimx35_timer_init(void) mx35_clocks_init(); } -static struct sys_timer eukrea_cpuimx35_timer = { - .init = eukrea_cpuimx35_timer_init, -}; - MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ .atag_offset = 0x100, @@ -204,7 +200,7 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") .init_early = imx35_init_early, .init_irq = mx35_init_irq, .handle_irq = imx35_handle_irq, - .timer = &eukrea_cpuimx35_timer, + .init_time = eukrea_cpuimx35_timer_init, .init_machine = eukrea_cpuimx35_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index b727de0..9b73932 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -355,10 +355,6 @@ static void __init eukrea_cpuimx51sd_timer_init(void) mx51_clocks_init(32768, 24000000, 22579200, 0); } -static struct sys_timer mxc_timer = { - .init = eukrea_cpuimx51sd_timer_init, -}; - MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") /* Maintainer: Eric Bénard <eric@eukrea.com> */ .atag_offset = 0x100, @@ -366,7 +362,7 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") .init_early = imx51_init_early, .init_irq = mx51_init_irq, .handle_irq = imx51_handle_irq, - .timer = &mxc_timer, + .init_time = eukrea_cpuimx51sd_timer_init, .init_machine = eukrea_cpuimx51sd_init, .init_late = imx51_init_late, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 75027a5..4bf4544 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -159,10 +159,6 @@ static void __init eukrea_cpuimx25_timer_init(void) mx25_clocks_init(); } -static struct sys_timer eukrea_cpuimx25_timer = { - .init = eukrea_cpuimx25_timer_init, -}; - MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ .atag_offset = 0x100, @@ -170,7 +166,7 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") .init_early = imx25_init_early, .init_irq = mx25_init_irq, .handle_irq = imx25_handle_irq, - .timer = &eukrea_cpuimx25_timer, + .init_time = eukrea_cpuimx25_timer_init, .init_machine = eukrea_cpuimx25_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 318bd8d..29ac8ee6 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -598,10 +598,6 @@ static void __init visstrim_m10_timer_init(void) mx27_clocks_init((unsigned long)25000000); } -static struct sys_timer visstrim_m10_timer = { - .init = visstrim_m10_timer_init, -}; - MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .atag_offset = 0x100, .reserve = visstrim_reserve, @@ -609,7 +605,7 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .init_early = imx27_init_early, .init_irq = mx27_init_irq, .handle_irq = imx27_handle_irq, - .timer = &visstrim_m10_timer, + .init_time = visstrim_m10_timer_init, .init_machine = visstrim_m10_board_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 53a8601..1a851ae 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -65,10 +65,6 @@ static void __init mx27ipcam_timer_init(void) mx27_clocks_init(25000000); } -static struct sys_timer mx27ipcam_timer = { - .init = mx27ipcam_timer_init, -}; - MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") /* maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, @@ -76,7 +72,7 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") .init_early = imx27_init_early, .init_irq = mx27_init_irq, .handle_irq = imx27_handle_irq, - .timer = &mx27ipcam_timer, + .init_time = mx27ipcam_timer_init, .init_machine = mx27ipcam_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index fc8dce9..3da2e3e 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -72,17 +72,13 @@ static void __init mx27lite_timer_init(void) mx27_clocks_init(26000000); } -static struct sys_timer mx27lite_timer = { - .init = mx27lite_timer_init, -}; - MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, .handle_irq = imx27_handle_irq, - .timer = &mx27lite_timer, + .init_time = mx27lite_timer_init, .init_machine = mx27lite_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 860284d..f579c61 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -44,26 +44,22 @@ static void __init imx53_dt_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init imx53_timer_init(void) -{ - mx53_clocks_init_dt(); -} - -static struct sys_timer imx53_timer = { - .init = imx53_timer_init, -}; - static const char *imx53_dt_board_compat[] __initdata = { "fsl,imx53", NULL }; +static void __init imx53_timer_init(void) +{ + mx53_clocks_init_dt(); +} + DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, .handle_irq = imx53_handle_irq, - .timer = &imx53_timer, + .init_time = imx53_timer_init, .init_machine = imx53_dt_init, .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 4eb1b3a..1786b2d 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -12,12 +12,12 @@ #include <linux/clk.h> #include <linux/clkdev.h> -#include <linux/cpuidle.h> #include <linux/delay.h> #include <linux/export.h> #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -26,11 +26,10 @@ #include <linux/regmap.h> #include <linux/micrel_phy.h> #include <linux/mfd/syscon.h> -#include <asm/cpuidle.h> #include <asm/smp_twd.h> #include <asm/hardware/cache-l2x0.h> -#include <asm/hardware/gic.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/system_misc.h> @@ -201,37 +200,28 @@ static void __init imx6q_init_machine(void) imx6q_1588_init(); } -static struct cpuidle_driver imx6q_cpuidle_driver = { - .name = "imx6q_cpuidle", - .owner = THIS_MODULE, - .en_core_tk_irqen = 1, - .states[0] = ARM_CPUIDLE_WFI_STATE, - .state_count = 1, -}; - static void __init imx6q_init_late(void) { - imx_cpuidle_init(&imx6q_cpuidle_driver); + /* + * WAIT mode is broken on TO 1.0 and 1.1, so there is no point + * to run cpuidle on them. + */ + if (imx6q_revision() > IMX_CHIP_REVISION_1_1) + imx6q_cpuidle_init(); } static void __init imx6q_map_io(void) { - imx_lluart_map_io(); + debug_ll_io_init(); imx_scu_map_io(); - imx6q_clock_map_io(); } -static const struct of_device_id imx6q_irq_match[] __initconst = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - { /* sentinel */ } -}; - static void __init imx6q_init_irq(void) { l2x0_of_init(0, ~0UL); imx_src_init(); imx_gpc_init(); - of_irq_init(imx6q_irq_match); + irqchip_init(); } static void __init imx6q_timer_init(void) @@ -241,10 +231,6 @@ static void __init imx6q_timer_init(void) imx_print_silicon_rev("i.MX6Q", imx6q_revision()); } -static struct sys_timer imx6q_timer = { - .init = imx6q_timer_init, -}; - static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6q", NULL, @@ -254,8 +240,7 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)") .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, - .handle_irq = imx6q_handle_irq, - .timer = &imx6q_timer, + .init_time = imx6q_timer_init, .init_machine = imx6q_init_machine, .init_late = imx6q_init_late, .dt_compat = imx6q_dt_compat, diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 2e536ea5..c7bc41d 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -284,17 +284,13 @@ static void __init kzm_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer kzm_timer = { - .init = kzm_timer_init, -}; - MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") .atag_offset = 0x100, .map_io = kzm_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, - .timer = &kzm_timer, + .init_time = kzm_timer_init, .init_machine = kzm_board_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 06b4837..9f883e4 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -132,10 +132,6 @@ static void __init mx1ads_timer_init(void) mx1_clocks_init(32000); } -static struct sys_timer mx1ads_timer = { - .init = mx1ads_timer_init, -}; - MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ .atag_offset = 0x100, @@ -143,7 +139,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") .init_early = imx1_init_early, .init_irq = mx1_init_irq, .handle_irq = imx1_handle_irq, - .timer = &mx1ads_timer, + .init_time = mx1ads_timer_init, .init_machine = mx1ads_init, .restart = mxc_restart, MACHINE_END @@ -154,7 +150,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS") .init_early = imx1_init_early, .init_irq = mx1_init_irq, .handle_irq = imx1_handle_irq, - .timer = &mx1ads_timer, + .init_time = mx1ads_timer_init, .init_machine = mx1ads_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 6adb313..a06aa4d 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -318,10 +318,6 @@ static void __init mx21ads_timer_init(void) mx21_clocks_init(32768, 26000000); } -static struct sys_timer mx21ads_timer = { - .init = mx21ads_timer_init, -}; - MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, @@ -329,7 +325,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS") .init_early = imx21_init_early, .init_irq = mx21_init_irq, .handle_irq = imx21_handle_irq, - .timer = &mx21ads_timer, + .init_time = mx21ads_timer_init, .init_machine = mx21ads_board_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index b1b03aa..8bcda68 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -257,10 +257,6 @@ static void __init mx25pdk_timer_init(void) mx25_clocks_init(); } -static struct sys_timer mx25pdk_timer = { - .init = mx25pdk_timer_init, -}; - MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, @@ -268,7 +264,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") .init_early = imx25_init_early, .init_irq = mx25_init_irq, .handle_irq = imx25_handle_irq, - .timer = &mx25pdk_timer, + .init_time = mx25pdk_timer_init, .init_machine = mx25pdk_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index d0e547f..25b3e4c 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -538,10 +538,6 @@ static void __init mx27pdk_timer_init(void) mx27_clocks_init(26000000); } -static struct sys_timer mx27pdk_timer = { - .init = mx27pdk_timer_init, -}; - MACHINE_START(MX27_3DS, "Freescale MX27PDK") /* maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, @@ -549,7 +545,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK") .init_early = imx27_init_early, .init_irq = mx27_init_irq, .handle_irq = imx27_handle_irq, - .timer = &mx27pdk_timer, + .init_time = mx27pdk_timer_init, .init_machine = mx27pdk_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 3d036f5..9821b824 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -323,10 +323,6 @@ static void __init mx27ads_timer_init(void) mx27_clocks_init(fref); } -static struct sys_timer mx27ads_timer = { - .init = mx27ads_timer_init, -}; - static struct map_desc mx27ads_io_desc[] __initdata = { { .virtual = PBC_BASE_ADDRESS, @@ -349,7 +345,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .init_early = imx27_init_early, .init_irq = mx27_init_irq, .handle_irq = imx27_handle_irq, - .timer = &mx27ads_timer, + .init_time = mx27ads_timer_init, .init_machine = mx27ads_board_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index bc301be..1ed9161 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -762,10 +762,6 @@ static void __init mx31_3ds_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer mx31_3ds_timer = { - .init = mx31_3ds_timer_init, -}; - static void __init mx31_3ds_reserve(void) { /* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ @@ -780,7 +776,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, - .timer = &mx31_3ds_timer, + .init_time = mx31_3ds_timer_init, .init_machine = mx31_3ds_init, .reserve = mx31_3ds_reserve, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 8b56f88..daf8889 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -576,10 +576,6 @@ static void __init mx31ads_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer mx31ads_timer = { - .init = mx31ads_timer_init, -}; - MACHINE_START(MX31ADS, "Freescale MX31ADS") /* Maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, @@ -587,7 +583,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .init_early = imx31_init_early, .init_irq = mx31ads_init_irq, .handle_irq = imx31_handle_irq, - .timer = &mx31ads_timer, + .init_time = mx31ads_timer_init, .init_machine = mx31ads_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 08b9965..832b1e2 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -303,17 +303,13 @@ static void __init mx31lilly_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer mx31lilly_timer = { - .init = mx31lilly_timer_init, -}; - MACHINE_START(LILLY1131, "INCO startec LILLY-1131") .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, - .timer = &mx31lilly_timer, + .init_time = mx31lilly_timer_init, .init_machine = mx31lilly_board_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index bdcd92e..bea0729 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -285,10 +285,6 @@ static void __init mx31lite_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer mx31lite_timer = { - .init = mx31lite_timer_init, -}; - MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") /* Maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, @@ -296,7 +292,7 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, - .timer = &mx31lite_timer, + .init_time = mx31lite_timer_init, .init_machine = mx31lite_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 2517cfa..dae4cd7 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -596,10 +596,6 @@ static void __init mx31moboard_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer mx31moboard_timer = { - .init = mx31moboard_timer_init, -}; - static void __init mx31moboard_reserve(void) { /* reserve 4 MiB for mx3-camera */ @@ -615,7 +611,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, - .timer = &mx31moboard_timer, + .init_time = mx31moboard_timer_init, .init_machine = mx31moboard_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 5277da4..a42f4f0 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -602,10 +602,6 @@ static void __init mx35pdk_timer_init(void) mx35_clocks_init(); } -static struct sys_timer mx35pdk_timer = { - .init = mx35pdk_timer_init, -}; - static void __init mx35_3ds_reserve(void) { /* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ @@ -620,7 +616,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .init_early = imx35_init_early, .init_irq = mx35_init_irq, .handle_irq = imx35_handle_irq, - .timer = &mx35pdk_timer, + .init_time = mx35pdk_timer_init, .init_machine = mx35_3ds_init, .reserve = mx35_3ds_reserve, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c deleted file mode 100644 index 0c1f88a..0000000 --- a/arch/arm/mach-imx/mach-mx50_rdp.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx50.h" -#include "hardware.h" -#include "iomux-mx50.h" - -#define FEC_EN IMX_GPIO_NR(6, 23) -#define FEC_RESET_B IMX_GPIO_NR(4, 12) - -static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = { - /* SD1 */ - MX50_PAD_ECSPI2_SS0__GPIO_4_19, - MX50_PAD_EIM_CRE__GPIO_1_27, - MX50_PAD_SD1_CMD__SD1_CMD, - - MX50_PAD_SD1_CLK__SD1_CLK, - MX50_PAD_SD1_D0__SD1_D0, - MX50_PAD_SD1_D1__SD1_D1, - MX50_PAD_SD1_D2__SD1_D2, - MX50_PAD_SD1_D3__SD1_D3, - - /* SD2 */ - MX50_PAD_SD2_CD__GPIO_5_17, - MX50_PAD_SD2_WP__GPIO_5_16, - MX50_PAD_SD2_CMD__SD2_CMD, - MX50_PAD_SD2_CLK__SD2_CLK, - MX50_PAD_SD2_D0__SD2_D0, - MX50_PAD_SD2_D1__SD2_D1, - MX50_PAD_SD2_D2__SD2_D2, - MX50_PAD_SD2_D3__SD2_D3, - MX50_PAD_SD2_D4__SD2_D4, - MX50_PAD_SD2_D5__SD2_D5, - MX50_PAD_SD2_D6__SD2_D6, - MX50_PAD_SD2_D7__SD2_D7, - - /* SD3 */ - MX50_PAD_SD3_CMD__SD3_CMD, - MX50_PAD_SD3_CLK__SD3_CLK, - MX50_PAD_SD3_D0__SD3_D0, - MX50_PAD_SD3_D1__SD3_D1, - MX50_PAD_SD3_D2__SD3_D2, - MX50_PAD_SD3_D3__SD3_D3, - MX50_PAD_SD3_D4__SD3_D4, - MX50_PAD_SD3_D5__SD3_D5, - MX50_PAD_SD3_D6__SD3_D6, - MX50_PAD_SD3_D7__SD3_D7, - - /* PWR_INT */ - MX50_PAD_ECSPI2_MISO__GPIO_4_18, - - /* UART pad setting */ - MX50_PAD_UART1_TXD__UART1_TXD, - MX50_PAD_UART1_RXD__UART1_RXD, - MX50_PAD_UART1_RTS__UART1_RTS, - MX50_PAD_UART2_TXD__UART2_TXD, - MX50_PAD_UART2_RXD__UART2_RXD, - MX50_PAD_UART2_CTS__UART2_CTS, - MX50_PAD_UART2_RTS__UART2_RTS, - - MX50_PAD_I2C1_SCL__I2C1_SCL, - MX50_PAD_I2C1_SDA__I2C1_SDA, - MX50_PAD_I2C2_SCL__I2C2_SCL, - MX50_PAD_I2C2_SDA__I2C2_SDA, - - MX50_PAD_EPITO__USBH1_PWR, - /* Need to comment below line if - * one needs to debug owire. - */ - MX50_PAD_OWIRE__USBH1_OC, - /* using gpio to control otg pwr */ - MX50_PAD_PWM2__GPIO_6_25, - MX50_PAD_I2C3_SCL__USBOTG_OC, - - MX50_PAD_SSI_RXC__FEC_MDIO, - MX50_PAD_SSI_RXFS__FEC_MDC, - MX50_PAD_DISP_D0__FEC_TXCLK, - MX50_PAD_DISP_D1__FEC_RX_ER, - MX50_PAD_DISP_D2__FEC_RX_DV, - MX50_PAD_DISP_D3__FEC_RXD1, - MX50_PAD_DISP_D4__FEC_RXD0, - MX50_PAD_DISP_D5__FEC_TX_EN, - MX50_PAD_DISP_D6__FEC_TXD1, - MX50_PAD_DISP_D7__FEC_TXD0, - MX50_PAD_I2C3_SDA__GPIO_6_23, - MX50_PAD_ECSPI1_SCLK__GPIO_4_12, - - MX50_PAD_CSPI_SS0__CSPI_SS0, - MX50_PAD_ECSPI1_MOSI__CSPI_SS1, - MX50_PAD_CSPI_MOSI__CSPI_MOSI, - MX50_PAD_CSPI_MISO__CSPI_MISO, - - /* SGTL500_OSC_EN */ - MX50_PAD_UART1_CTS__GPIO_6_8, - - /* SGTL_AMP_SHDN */ - MX50_PAD_UART3_RXD__GPIO_6_15, - - /* Keypad */ - MX50_PAD_KEY_COL0__KEY_COL0, - MX50_PAD_KEY_ROW0__KEY_ROW0, - MX50_PAD_KEY_COL1__KEY_COL1, - MX50_PAD_KEY_ROW1__KEY_ROW1, - MX50_PAD_KEY_COL2__KEY_COL2, - MX50_PAD_KEY_ROW2__KEY_ROW2, - MX50_PAD_KEY_COL3__KEY_COL3, - MX50_PAD_KEY_ROW3__KEY_ROW3, - MX50_PAD_EIM_DA0__KEY_COL4, - MX50_PAD_EIM_DA1__KEY_ROW4, - MX50_PAD_EIM_DA2__KEY_COL5, - MX50_PAD_EIM_DA3__KEY_ROW5, - MX50_PAD_EIM_DA4__KEY_COL6, - MX50_PAD_EIM_DA5__KEY_ROW6, - MX50_PAD_EIM_DA6__KEY_COL7, - MX50_PAD_EIM_DA7__KEY_ROW7, - /*EIM pads */ - MX50_PAD_EIM_DA8__GPIO_1_8, - MX50_PAD_EIM_DA9__GPIO_1_9, - MX50_PAD_EIM_DA10__GPIO_1_10, - MX50_PAD_EIM_DA11__GPIO_1_11, - MX50_PAD_EIM_DA12__GPIO_1_12, - MX50_PAD_EIM_DA13__GPIO_1_13, - MX50_PAD_EIM_DA14__GPIO_1_14, - MX50_PAD_EIM_DA15__GPIO_1_15, - MX50_PAD_EIM_CS2__GPIO_1_16, - MX50_PAD_EIM_CS1__GPIO_1_17, - MX50_PAD_EIM_CS0__GPIO_1_18, - MX50_PAD_EIM_EB0__GPIO_1_19, - MX50_PAD_EIM_EB1__GPIO_1_20, - MX50_PAD_EIM_WAIT__GPIO_1_21, - MX50_PAD_EIM_BCLK__GPIO_1_22, - MX50_PAD_EIM_RDY__GPIO_1_23, - MX50_PAD_EIM_OE__GPIO_1_24, -}; - -/* Serial ports */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct fec_platform_data fec_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static inline void mx50_rdp_fec_reset(void) -{ - gpio_request(FEC_EN, "fec-en"); - gpio_direction_output(FEC_EN, 0); - gpio_request(FEC_RESET_B, "fec-reset_b"); - gpio_direction_output(FEC_RESET_B, 0); - msleep(1); - gpio_set_value(FEC_RESET_B, 1); -} - -static const struct imxi2c_platform_data i2c_data __initconst = { - .bitrate = 100000, -}; - -/* - * Board specific initialization. - */ -static void __init mx50_rdp_board_init(void) -{ - imx50_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads, - ARRAY_SIZE(mx50_rdp_pads)); - - imx50_add_imx_uart(0, &uart_pdata); - imx50_add_imx_uart(1, &uart_pdata); - mx50_rdp_fec_reset(); - imx50_add_fec(&fec_data); - imx50_add_imx_i2c(0, &i2c_data); - imx50_add_imx_i2c(1, &i2c_data); - imx50_add_imx_i2c(2, &i2c_data); -} - -static void __init mx50_rdp_timer_init(void) -{ - mx50_clocks_init(32768, 24000000, 22579200); -} - -static struct sys_timer mx50_rdp_timer = { - .init = mx50_rdp_timer_init, -}; - -MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform") - .map_io = mx50_map_io, - .init_early = imx50_init_early, - .init_irq = mx50_init_irq, - .handle_irq = imx50_handle_irq, - .timer = &mx50_rdp_timer, - .init_machine = mx50_rdp_board_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c deleted file mode 100644 index abc25bd..0000000 --- a/arch/arm/mach-imx/mach-mx51_3ds.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "3ds_debugboard.h" -#include "common.h" -#include "devices-imx51.h" -#include "hardware.h" -#include "iomux-mx51.h" - -#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) - -static iomux_v3_cfg_t mx51_3ds_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* UART2 */ - MX51_PAD_UART2_RXD__UART2_RXD, - MX51_PAD_UART2_TXD__UART2_TXD, - MX51_PAD_EIM_D25__UART2_CTS, - MX51_PAD_EIM_D26__UART2_RTS, - - /* UART3 */ - MX51_PAD_UART3_RXD__UART3_RXD, - MX51_PAD_UART3_TXD__UART3_TXD, - MX51_PAD_EIM_D24__UART3_CTS, - MX51_PAD_EIM_D27__UART3_RTS, - - /* CPLD PARENT IRQ PIN */ - MX51_PAD_GPIO1_6__GPIO1_6, - - /* KPP */ - MX51_PAD_KEY_ROW0__KEY_ROW0, - MX51_PAD_KEY_ROW1__KEY_ROW1, - MX51_PAD_KEY_ROW2__KEY_ROW2, - MX51_PAD_KEY_ROW3__KEY_ROW3, - MX51_PAD_KEY_COL0__KEY_COL0, - MX51_PAD_KEY_COL1__KEY_COL1, - MX51_PAD_KEY_COL2__KEY_COL2, - MX51_PAD_KEY_COL3__KEY_COL3, - MX51_PAD_KEY_COL4__KEY_COL4, - MX51_PAD_KEY_COL5__KEY_COL5, - - /* eCSPI2 */ - MX51_PAD_NANDF_RB2__ECSPI2_SCLK, - MX51_PAD_NANDF_RB3__ECSPI2_MISO, - MX51_PAD_NANDF_D15__ECSPI2_MOSI, - MX51_PAD_NANDF_D12__GPIO3_28, -}; - -/* Serial ports */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static int mx51_3ds_board_keymap[] = { - KEY(0, 0, KEY_1), - KEY(0, 1, KEY_2), - KEY(0, 2, KEY_3), - KEY(0, 3, KEY_F1), - KEY(0, 4, KEY_UP), - KEY(0, 5, KEY_F2), - - KEY(1, 0, KEY_4), - KEY(1, 1, KEY_5), - KEY(1, 2, KEY_6), - KEY(1, 3, KEY_LEFT), - KEY(1, 4, KEY_SELECT), - KEY(1, 5, KEY_RIGHT), - - KEY(2, 0, KEY_7), - KEY(2, 1, KEY_8), - KEY(2, 2, KEY_9), - KEY(2, 3, KEY_F3), - KEY(2, 4, KEY_DOWN), - KEY(2, 5, KEY_F4), - - KEY(3, 0, KEY_0), - KEY(3, 1, KEY_OK), - KEY(3, 2, KEY_ESC), - KEY(3, 3, KEY_ENTER), - KEY(3, 4, KEY_MENU), - KEY(3, 5, KEY_BACK) -}; - -static const struct matrix_keymap_data mx51_3ds_map_data __initconst = { - .keymap = mx51_3ds_board_keymap, - .keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap), -}; - -static int mx51_3ds_spi2_cs[] = { - MXC_SPI_CS(0), - MX51_3DS_ECSPI2_CS, -}; - -static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = { - .chipselect = mx51_3ds_spi2_cs, - .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs), -}; - -static struct spi_board_info mx51_3ds_spi_nor_device[] = { - { - .modalias = "m25p80", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 1, - .mode = SPI_MODE_0, - .platform_data = NULL,}, -}; - -/* - * Board specific initialization. - */ -static void __init mx51_3ds_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, - ARRAY_SIZE(mx51_3ds_pads)); - - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); - imx51_add_imx_uart(2, &uart_pdata); - - imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata); - spi_register_board_info(mx51_3ds_spi_nor_device, - ARRAY_SIZE(mx51_3ds_spi_nor_device)); - - if (mxc_expio_init(MX51_CS5_BASE_ADDR, IMX_GPIO_NR(1, 6))) - printk(KERN_WARNING "Init of the debugboard failed, all " - "devices on the board are unusable.\n"); - - imx51_add_sdhci_esdhc_imx(0, NULL); - imx51_add_imx_keypad(&mx51_3ds_map_data); - imx51_add_imx2_wdt(0); -} - -static void __init mx51_3ds_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx51_3ds_timer = { - .init = mx51_3ds_timer_init, -}; - -MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") - /* Maintainer: Freescale Semiconductor, Inc. */ - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .timer = &mx51_3ds_timer, - .init_machine = mx51_3ds_init, - .init_late = imx51_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index d9a84ca..6c4d7fe 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -418,10 +418,6 @@ static void __init mx51_babbage_timer_init(void) mx51_clocks_init(32768, 24000000, 22579200, 0); } -static struct sys_timer mx51_babbage_timer = { - .init = mx51_babbage_timer_init, -}; - MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ .atag_offset = 0x100, @@ -429,7 +425,7 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") .init_early = imx51_init_early, .init_irq = mx51_init_irq, .handle_irq = imx51_handle_irq, - .timer = &mx51_babbage_timer, + .init_time = mx51_babbage_timer_init, .init_machine = mx51_babbage_init, .init_late = imx51_init_late, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index f4a8c7e..a27faab 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -261,10 +261,6 @@ static void __init mxt_td60_timer_init(void) mx27_clocks_init(26000000); } -static struct sys_timer mxt_td60_timer = { - .init = mxt_td60_timer_init, -}; - MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") /* maintainer: Maxtrack Industrial */ .atag_offset = 0x100, @@ -272,7 +268,7 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") .init_early = imx27_init_early, .init_irq = mx27_init_irq, .handle_irq = imx27_handle_irq, - .timer = &mxt_td60_timer, + .init_time = mxt_td60_timer_init, .init_machine = mxt_td60_board_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index eee369f..b8b15bb 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -416,10 +416,6 @@ static void __init pca100_timer_init(void) mx27_clocks_init(26000000); } -static struct sys_timer pca100_timer = { - .init = pca100_timer_init, -}; - MACHINE_START(PCA100, "phyCARD-i.MX27") .atag_offset = 0x100, .map_io = mx27_map_io, @@ -427,6 +423,6 @@ MACHINE_START(PCA100, "phyCARD-i.MX27") .init_irq = mx27_init_irq, .handle_irq = imx27_handle_irq, .init_machine = pca100_init, - .timer = &pca100_timer, + .init_time = pca100_timer_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 547fef1..bc0261e 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -685,10 +685,6 @@ static void __init pcm037_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer pcm037_timer = { - .init = pcm037_timer_init, -}; - static void __init pcm037_reserve(void) { /* reserve 4 MiB for mx3-camera */ @@ -709,7 +705,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, - .timer = &pcm037_timer, + .init_time = pcm037_timer_init, .init_machine = pcm037_init, .init_late = pcm037_init_late, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 4aa0d07..e805ac2 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -346,17 +346,13 @@ static void __init pcm038_timer_init(void) mx27_clocks_init(26000000); } -static struct sys_timer pcm038_timer = { - .init = pcm038_timer_init, -}; - MACHINE_START(PCM038, "phyCORE-i.MX27") .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, .handle_irq = imx27_handle_irq, - .timer = &pcm038_timer, + .init_time = pcm038_timer_init, .init_machine = pcm038_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 9244544..8ed533f 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -394,10 +394,6 @@ static void __init pcm043_timer_init(void) mx35_clocks_init(); } -static struct sys_timer pcm043_timer = { - .init = pcm043_timer_init, -}; - MACHINE_START(PCM043, "Phytec Phycore pcm043") /* Maintainer: Pengutronix */ .atag_offset = 0x100, @@ -405,7 +401,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") .init_early = imx35_init_early, .init_irq = mx35_init_irq, .handle_irq = imx35_handle_irq, - .timer = &pcm043_timer, + .init_time = pcm043_timer_init, .init_machine = pcm043_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 96d9a91..22af27e 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -260,10 +260,6 @@ static void __init qong_timer_init(void) mx31_clocks_init(26000000); } -static struct sys_timer qong_timer = { - .init = qong_timer_init, -}; - MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ .atag_offset = 0x100, @@ -271,7 +267,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .handle_irq = imx31_handle_irq, - .timer = &qong_timer, + .init_time = qong_timer_init, .init_machine = qong_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index fc97040..b0fa10d 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -131,10 +131,6 @@ static void __init scb9328_timer_init(void) mx1_clocks_init(32000); } -static struct sys_timer scb9328_timer = { - .init = scb9328_timer_init, -}; - MACHINE_START(SCB9328, "Synertronixx scb9328") /* Sascha Hauer */ .atag_offset = 100, @@ -142,7 +138,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328") .init_early = imx1_init_early, .init_irq = mx1_init_irq, .handle_irq = imx1_handle_irq, - .timer = &scb9328_timer, + .init_time = scb9328_timer_init, .init_machine = scb9328_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 3aecf91..0910761e 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -305,17 +305,13 @@ static void __init vpr200_timer_init(void) mx35_clocks_init(); } -static struct sys_timer vpr200_timer = { - .init = vpr200_timer_init, -}; - MACHINE_START(VPR200, "VPR200") /* Maintainer: Creative Product Design */ .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, .handle_irq = imx35_handle_irq, - .timer = &vpr200_timer, + .init_time = vpr200_timer_init, .init_machine = vpr200_board_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 79d71cf..cf34994 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -24,16 +24,6 @@ #include "iomux-v3.h" /* - * Define the MX50 memory map. - */ -static struct map_desc mx50_io_desc[] __initdata = { - imx_map_entry(MX50, TZIC, MT_DEVICE), - imx_map_entry(MX50, SPBA0, MT_DEVICE), - imx_map_entry(MX50, AIPS1, MT_DEVICE), - imx_map_entry(MX50, AIPS2, MT_DEVICE), -}; - -/* * Define the MX51 memory map. */ static struct map_desc mx51_io_desc[] __initdata = { @@ -59,11 +49,6 @@ static struct map_desc mx53_io_desc[] __initdata = { * system startup to create static physical to virtual memory mappings * for the IO modules. */ -void __init mx50_map_io(void) -{ - iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc)); -} - void __init mx51_map_io(void) { iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc)); @@ -74,13 +59,6 @@ void __init mx53_map_io(void) iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc)); } -void __init imx50_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX50); - mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); -} - /* * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by * the Freescale marketing division. However this did not remove the @@ -115,11 +93,6 @@ void __init imx53_init_early(void) mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); } -void __init mx50_init_irq(void) -{ - tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR)); -} - void __init mx51_init_irq(void) { tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR)); @@ -148,31 +121,10 @@ static struct sdma_platform_data imx51_sdma_pdata __initdata = { .script_addrs = &imx51_sdma_script, }; -static const struct resource imx50_audmux_res[] __initconst = { - DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K), -}; - static const struct resource imx51_audmux_res[] __initconst = { DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K), }; -void __init imx50_soc_init(void) -{ - mxc_device_init(); - - /* i.mx50 has the i.mx35 type gpio */ - mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); - mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); - mxc_register_gpio("imx35-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); - mxc_register_gpio("imx35-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); - mxc_register_gpio("imx35-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); - mxc_register_gpio("imx35-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); - - /* i.mx50 has the i.mx31 type audmux */ - platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res, - ARRAY_SIZE(imx50_audmux_res)); -} - void __init imx51_soc_init(void) { mxc_device_init(); diff --git a/arch/arm/mach-imx/mx50.h b/arch/arm/mach-imx/mx50.h deleted file mode 100644 index 09ac19c..0000000 --- a/arch/arm/mach-imx/mx50.h +++ /dev/null @@ -1,290 +0,0 @@ -#ifndef __MACH_MX50_H__ -#define __MACH_MX50_H__ - -/* - * IROM - */ -#define MX50_IROM_BASE_ADDR 0x0 -#define MX50_IROM_SIZE SZ_64K - -/* TZIC */ -#define MX50_TZIC_BASE_ADDR 0x0fffc000 -#define MX50_TZIC_SIZE SZ_16K - -/* - * IRAM - */ -#define MX50_IRAM_BASE_ADDR 0xf8000000 /* internal ram */ -#define MX50_IRAM_PARTITIONS 16 -#define MX50_IRAM_SIZE (MX50_IRAM_PARTITIONS * SZ_8K) /* 128KB */ - -/* - * Databahn - */ -#define MX50_DATABAHN_BASE_ADDR 0x14000000 - -/* - * Graphics Memory of GPU - */ -#define MX50_GPU2D_BASE_ADDR 0x20000000 - -#define MX50_DEBUG_BASE_ADDR 0x40000000 -#define MX50_DEBUG_SIZE SZ_1M -#define MX50_ETB_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00001000) -#define MX50_ETM_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00002000) -#define MX50_TPIU_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00003000) -#define MX50_CTI0_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00004000) -#define MX50_CTI1_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00005000) -#define MX50_CTI2_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00006000) -#define MX50_CTI3_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00007000) -#define MX50_CORTEX_DBG_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00008000) - -#define MX50_APBHDMA_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01000000) -#define MX50_OCOTP_CTRL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01002000) -#define MX50_DIGCTL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01004000) -#define MX50_GPMI_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01006000) -#define MX50_BCH_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01008000) -#define MX50_ELCDIF_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100a000) -#define MX50_EPXP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100c000) -#define MX50_DCP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100e000) -#define MX50_EPDC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01010000) -#define MX50_QOSC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01012000) -#define MX50_PERFMON_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01014000) -#define MX50_SSP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01016000) -#define MX50_ANATOP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01018000) -#define MX50_NIC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x08000000) - -/* - * SPBA global module enabled #0 - */ -#define MX50_SPBA0_BASE_ADDR 0x50000000 -#define MX50_SPBA0_SIZE SZ_1M - -#define MX50_MMC_SDHC1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00004000) -#define MX50_MMC_SDHC2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00008000) -#define MX50_UART3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x0000c000) -#define MX50_CSPI1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00010000) -#define MX50_SSI2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00014000) -#define MX50_MMC_SDHC3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00020000) -#define MX50_MMC_SDHC4_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00024000) - -/* - * AIPS 1 - */ -#define MX50_AIPS1_BASE_ADDR 0x53f00000 -#define MX50_AIPS1_SIZE SZ_1M - -#define MX50_OTG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00080000) -#define MX50_GPIO1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00084000) -#define MX50_GPIO2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00088000) -#define MX50_GPIO3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x0008c000) -#define MX50_GPIO4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00090000) -#define MX50_KPP_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00094000) -#define MX50_WDOG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00098000) -#define MX50_GPT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a0000) -#define MX50_SRTC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a4000) -#define MX50_IOMUXC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a8000) -#define MX50_EPIT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ac000) -#define MX50_PWM1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b4000) -#define MX50_PWM2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b8000) -#define MX50_UART1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000bc000) -#define MX50_UART2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000c0000) -#define MX50_SRC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d0000) -#define MX50_CCM_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d4000) -#define MX50_GPC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d8000) -#define MX50_GPIO5_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000dc000) -#define MX50_GPIO6_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000e0000) -#define MX50_I2C3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ec000) -#define MX50_UART4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f0000) - -#define MX50_MSHC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f4000) -#define MX50_RNGB_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f8000) - -/* - * AIPS 2 - */ -#define MX50_AIPS2_BASE_ADDR 0x63f00000 -#define MX50_AIPS2_SIZE SZ_1M - -#define MX50_PLL1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00080000) -#define MX50_PLL2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00084000) -#define MX50_PLL3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00088000) -#define MX50_UART5_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00090000) -#define MX50_AHBMAX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00094000) -#define MX50_ARM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a0000) -#define MX50_OWIRE_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a4000) -#define MX50_CSPI2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ac000) -#define MX50_SDMA_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b0000) -#define MX50_ROMCP_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b8000) -#define MX50_CSPI3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c0000) -#define MX50_I2C2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c4000) -#define MX50_I2C1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c8000) -#define MX50_SSI1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000cc000) -#define MX50_AUDMUX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d0000) -#define MX50_WEIM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d8000) -#define MX50_FEC_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ec000) - -/* - * Memory regions and CS - */ -#define MX50_CSD0_BASE_ADDR 0x70000000 -#define MX50_CSD1_BASE_ADDR 0xb0000000 -#define MX50_CS0_BASE_ADDR 0xf0000000 - -#define MX50_IO_P2V(x) IMX_IO_P2V(x) -#define MX50_IO_ADDRESS(x) IOMEM(MX50_IO_P2V(x)) - -/* - * defines for SPBA modules - */ -#define MX50_SPBA_SDHC1 0x04 -#define MX50_SPBA_SDHC2 0x08 -#define MX50_SPBA_UART3 0x0c -#define MX50_SPBA_CSPI1 0x10 -#define MX50_SPBA_SSI2 0x14 -#define MX50_SPBA_SDHC3 0x20 -#define MX50_SPBA_SDHC4 0x24 -#define MX50_SPBA_SPDIF 0x28 -#define MX50_SPBA_ATA 0x30 -#define MX50_SPBA_SLIM 0x34 -#define MX50_SPBA_HSI2C 0x38 -#define MX50_SPBA_CTRL 0x3c - -/* - * DMA request assignments - */ -#define MX50_DMA_REQ_GPC 1 -#define MX50_DMA_REQ_ATA_UART4_RX 2 -#define MX50_DMA_REQ_ATA_UART4_TX 3 -#define MX50_DMA_REQ_CSPI1_RX 6 -#define MX50_DMA_REQ_CSPI1_TX 7 -#define MX50_DMA_REQ_CSPI2_RX 8 -#define MX50_DMA_REQ_CSPI2_TX 9 -#define MX50_DMA_REQ_I2C3_SDHC3 10 -#define MX50_DMA_REQ_SDHC4 11 -#define MX50_DMA_REQ_UART2_FIRI_RX 12 -#define MX50_DMA_REQ_UART2_FIRI_TX 13 -#define MX50_DMA_REQ_EXT0 14 -#define MX50_DMA_REQ_EXT1 15 -#define MX50_DMA_REQ_UART5_RX 16 -#define MX50_DMA_REQ_UART5_TX 17 -#define MX50_DMA_REQ_UART1_RX 18 -#define MX50_DMA_REQ_UART1_TX 19 -#define MX50_DMA_REQ_I2C1_SDHC1 20 -#define MX50_DMA_REQ_I2C2_SDHC2 21 -#define MX50_DMA_REQ_SSI2_RX2 22 -#define MX50_DMA_REQ_SSI2_TX2 23 -#define MX50_DMA_REQ_SSI2_RX1 24 -#define MX50_DMA_REQ_SSI2_TX1 25 -#define MX50_DMA_REQ_SSI1_RX2 26 -#define MX50_DMA_REQ_SSI1_TX2 27 -#define MX50_DMA_REQ_SSI1_RX1 28 -#define MX50_DMA_REQ_SSI1_TX1 29 -#define MX50_DMA_REQ_CSPI_RX 38 -#define MX50_DMA_REQ_CSPI_TX 39 -#define MX50_DMA_REQ_UART3_RX 42 -#define MX50_DMA_REQ_UART3_TX 43 - -/* - * Interrupt numbers - */ -#include <asm/irq.h> -#define MX50_INT_MMC_SDHC1 (NR_IRQS_LEGACY + 1) -#define MX50_INT_MMC_SDHC2 (NR_IRQS_LEGACY + 2) -#define MX50_INT_MMC_SDHC3 (NR_IRQS_LEGACY + 3) -#define MX50_INT_MMC_SDHC4 (NR_IRQS_LEGACY + 4) -#define MX50_INT_DAP (NR_IRQS_LEGACY + 5) -#define MX50_INT_SDMA (NR_IRQS_LEGACY + 6) -#define MX50_INT_IOMUX (NR_IRQS_LEGACY + 7) -#define MX50_INT_UART4 (NR_IRQS_LEGACY + 13) -#define MX50_INT_USB_H1 (NR_IRQS_LEGACY + 14) -#define MX50_INT_USB_OTG (NR_IRQS_LEGACY + 18) -#define MX50_INT_DATABAHN (NR_IRQS_LEGACY + 19) -#define MX50_INT_ELCDIF (NR_IRQS_LEGACY + 20) -#define MX50_INT_EPXP (NR_IRQS_LEGACY + 21) -#define MX50_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24) -#define MX50_INT_SRTC_TZ (NR_IRQS_LEGACY + 25) -#define MX50_INT_EPDC (NR_IRQS_LEGACY + 27) -#define MX50_INT_NIC (NR_IRQS_LEGACY + 28) -#define MX50_INT_SSI1 (NR_IRQS_LEGACY + 29) -#define MX50_INT_SSI2 (NR_IRQS_LEGACY + 30) -#define MX50_INT_UART1 (NR_IRQS_LEGACY + 31) -#define MX50_INT_UART2 (NR_IRQS_LEGACY + 32) -#define MX50_INT_UART3 (NR_IRQS_LEGACY + 33) -#define MX50_INT_RESV34 (NR_IRQS_LEGACY + 34) -#define MX50_INT_RESV35 (NR_IRQS_LEGACY + 35) -#define MX50_INT_CSPI1 (NR_IRQS_LEGACY + 36) -#define MX50_INT_CSPI2 (NR_IRQS_LEGACY + 37) -#define MX50_INT_CSPI (NR_IRQS_LEGACY + 38) -#define MX50_INT_GPT (NR_IRQS_LEGACY + 39) -#define MX50_INT_EPIT1 (NR_IRQS_LEGACY + 40) -#define MX50_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42) -#define MX50_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43) -#define MX50_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44) -#define MX50_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45) -#define MX50_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46) -#define MX50_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47) -#define MX50_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48) -#define MX50_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49) -#define MX50_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50) -#define MX50_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51) -#define MX50_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52) -#define MX50_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53) -#define MX50_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54) -#define MX50_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55) -#define MX50_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56) -#define MX50_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57) -#define MX50_INT_WDOG1 (NR_IRQS_LEGACY + 58) -#define MX50_INT_KPP (NR_IRQS_LEGACY + 60) -#define MX50_INT_PWM1 (NR_IRQS_LEGACY + 61) -#define MX50_INT_I2C1 (NR_IRQS_LEGACY + 62) -#define MX50_INT_I2C2 (NR_IRQS_LEGACY + 63) -#define MX50_INT_I2C3 (NR_IRQS_LEGACY + 64) -#define MX50_INT_RESV65 (NR_IRQS_LEGACY + 65) -#define MX50_INT_DCDC (NR_IRQS_LEGACY + 66) -#define MX50_INT_THERMAL_ALARM (NR_IRQS_LEGACY + 67) -#define MX50_INT_ANA3 (NR_IRQS_LEGACY + 68) -#define MX50_INT_ANA4 (NR_IRQS_LEGACY + 69) -#define MX50_INT_CCM1 (NR_IRQS_LEGACY + 71) -#define MX50_INT_CCM2 (NR_IRQS_LEGACY + 72) -#define MX50_INT_GPC1 (NR_IRQS_LEGACY + 73) -#define MX50_INT_GPC2 (NR_IRQS_LEGACY + 74) -#define MX50_INT_SRC (NR_IRQS_LEGACY + 75) -#define MX50_INT_NM (NR_IRQS_LEGACY + 76) -#define MX50_INT_PMU (NR_IRQS_LEGACY + 77) -#define MX50_INT_CTI_IRQ (NR_IRQS_LEGACY + 78) -#define MX50_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79) -#define MX50_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80) -#define MX50_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84) -#define MX50_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85) -#define MX50_INT_UART5 (NR_IRQS_LEGACY + 86) -#define MX50_INT_FEC (NR_IRQS_LEGACY + 87) -#define MX50_INT_OWIRE (NR_IRQS_LEGACY + 88) -#define MX50_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89) -#define MX50_INT_SJC (NR_IRQS_LEGACY + 90) -#define MX50_INT_DCP_CHAN1_3 (NR_IRQS_LEGACY + 91) -#define MX50_INT_DCP_CHAN0 (NR_IRQS_LEGACY + 92) -#define MX50_INT_PWM2 (NR_IRQS_LEGACY + 94) -#define MX50_INT_RNGB (NR_IRQS_LEGACY + 97) -#define MX50_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98) -#define MX50_INT_RAWNAND_BCH (NR_IRQS_LEGACY + 100) -#define MX50_INT_RAWNAND_GPMI (NR_IRQS_LEGACY + 102) -#define MX50_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103) -#define MX50_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104) -#define MX50_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105) -#define MX50_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106) -#define MX50_INT_MSHC (NR_IRQS_LEGACY + 109) -#define MX50_INT_APBHDMA_CHAN0 (NR_IRQS_LEGACY + 110) -#define MX50_INT_APBHDMA_CHAN1 (NR_IRQS_LEGACY + 111) -#define MX50_INT_APBHDMA_CHAN2 (NR_IRQS_LEGACY + 112) -#define MX50_INT_APBHDMA_CHAN3 (NR_IRQS_LEGACY + 113) -#define MX50_INT_APBHDMA_CHAN4 (NR_IRQS_LEGACY + 114) -#define MX50_INT_APBHDMA_CHAN5 (NR_IRQS_LEGACY + 115) -#define MX50_INT_APBHDMA_CHAN6 (NR_IRQS_LEGACY + 116) -#define MX50_INT_APBHDMA_CHAN7 (NR_IRQS_LEGACY + 117) - -#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) -extern int mx50_revision(void); -#endif - -#endif /* ifndef __MACH_MX50_H__ */ diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index d782983..7dce17a 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -32,7 +32,6 @@ #define MXC_CPU_MX27 27 #define MXC_CPU_MX31 31 #define MXC_CPU_MX35 35 -#define MXC_CPU_MX50 50 #define MXC_CPU_MX51 51 #define MXC_CPU_MX53 53 @@ -126,18 +125,6 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx35() (0) #endif -#ifdef CONFIG_SOC_IMX50 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX50 -# endif -# define cpu_is_mx50() (mxc_cpu_type == MXC_CPU_MX50) -#else -# define cpu_is_mx50() (0) -#endif - #ifdef CONFIG_SOC_IMX51 # ifdef mxc_cpu_type # undef mxc_cpu_type diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 66fae88..7c0b03f 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,14 +12,16 @@ #include <linux/init.h> #include <linux/smp.h> +#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/smp_scu.h> -#include <asm/hardware/gic.h> #include <asm/mach/map.h> #include "common.h" #include "hardware.h" +#define SCU_STANDBY_ENABLE (1 << 5) + static void __iomem *scu_base; static struct map_desc scu_io_desc __initdata = { @@ -42,6 +44,14 @@ void __init imx_scu_map_io(void) scu_base = IMX_IO_ADDRESS(base); } +void imx_scu_standby_enable(void) +{ + u32 val = readl_relaxed(scu_base); + + val |= SCU_STANDBY_ENABLE; + writel_relaxed(val, scu_base); +} + static void __cpuinit imx_secondary_init(unsigned int cpu) { /* @@ -71,8 +81,6 @@ static void __init imx_smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } void imx_smp_prepare(void) diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 2e063c2..f67fd7e 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -34,7 +34,7 @@ /* * set cpu low power mode before WFI instruction. This function is called - * mx5 because it can be used for mx50, mx51, and mx53. + * mx5 because it can be used for mx51, and mx53. */ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) { @@ -85,10 +85,7 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC); __raw_writel(ccm_clpcr, MXC_CCM_CLPCR); __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR); - - /* Enable NEON SRPG for all but MX50TO1.0. */ - if (mx50_revision() != IMX_CHIP_REVISION_1_0) - __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR); + __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR); if (stop_mode) { empgc0 |= MXC_SRPGCR_PCR; diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index f017302..fea9131 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -152,7 +152,8 @@ static int v2_set_next_event(unsigned long evt, __raw_writel(tcmp, timer_base + V2_TCMP); - return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ? + return evt < 0x7fffffff && + (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ? -ETIME : 0; } @@ -256,7 +257,6 @@ static struct irqaction mxc_timer_irq = { static struct clock_event_device clockevent_mxc = { .name = "mxc_timer1", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .set_mode = mxc_set_mode, .set_next_event = mx1_2_set_next_event, .rating = 200, @@ -264,21 +264,13 @@ static struct clock_event_device clockevent_mxc = { static int __init mxc_clockevent_init(struct clk *timer_clk) { - unsigned int c = clk_get_rate(timer_clk); - if (timer_is_v2()) clockevent_mxc.set_next_event = v2_set_next_event; - clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC, - clockevent_mxc.shift); - clockevent_mxc.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_mxc); - clockevent_mxc.min_delta_ns = - clockevent_delta2ns(0xff, &clockevent_mxc); - clockevent_mxc.cpumask = cpumask_of(0); - - clockevents_register_device(&clockevent_mxc); + clockevents_config_and_register(&clockevent_mxc, + clk_get_rate(timer_clk), + 0xff, 0xfffffffe); return 0; } diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index 79197d8..72516658b 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1,10 +1,5 @@ #include <linux/amba/serial.h> -#ifdef CONFIG_ARCH_INTEGRATOR_AP extern struct amba_pl010_data ap_uart_data; -#else -/* Not used without Integrator/AP support anyway */ -struct amba_pl010_data ap_uart_data {}; -#endif void integrator_init_early(void); int integrator_init(bool is_cp); void integrator_reserve(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 39c060f..81461d2 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -71,7 +71,7 @@ int __init integrator_init(bool is_cp) * hard-code them. The Integator/CP and forward have proper cell IDs. * Else we leave them undefined to the bus driver can autoprobe them. */ - if (!is_cp) { + if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) { rtc_device.periphid = 0x00041030; uart0_device.periphid = 0x00041010; uart1_device.periphid = 0x00041010; diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h index 30452f0..8f3cc99 100644 --- a/arch/arm/mach-integrator/include/mach/uncompress.h +++ b/arch/arm/mach-integrator/include/mach/uncompress.h @@ -46,5 +46,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 11e2a41..ea96144 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -94,7 +94,7 @@ void __iomem *ap_syscon_base; * f1b00000 1b000000 GPIO */ -static struct map_desc ap_io_desc[] __initdata = { +static struct map_desc ap_io_desc[] __initdata __maybe_unused = { { .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), @@ -425,7 +425,7 @@ void __init ap_init_early(void) #ifdef CONFIG_OF -static void __init ap_init_timer_of(void) +static void __init ap_of_timer_init(void) { struct device_node *node; const char *path; @@ -464,10 +464,6 @@ static void __init ap_init_timer_of(void) integrator_clockevent_init(rate, base, irq); } -static struct sys_timer ap_of_timer = { - .init = ap_init_timer_of, -}; - static const struct of_device_id fpga_irq_of_match[] __initconst = { { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, { /* Sentinel */ } @@ -586,7 +582,7 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") .init_early = ap_init_early, .init_irq = ap_init_irq_of, .handle_irq = fpga_handle_irq, - .timer = &ap_of_timer, + .init_time = ap_of_timer_init, .init_machine = ap_init_of, .restart = integrator_restart, .dt_compat = ap_dt_board_compat, @@ -613,7 +609,6 @@ static struct map_desc ap_io_desc_atag[] __initdata = { static void __init ap_map_io_atag(void) { iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag)); - ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); ap_map_io(); } @@ -638,7 +633,7 @@ static struct platform_device cfi_flash_device = { .resource = &cfi_flash_resource, }; -static void __init ap_init_timer(void) +static void __init ap_timer_init(void) { struct clk *clk; unsigned long rate; @@ -657,10 +652,6 @@ static void __init ap_init_timer(void) IRQ_TIMERINT1); } -static struct sys_timer ap_timer = { - .init = ap_init_timer, -}; - #define INTEGRATOR_SC_VALID_INT 0x003fffff static void __init ap_init_irq(void) @@ -685,6 +676,7 @@ static void __init ap_init(void) platform_device_register(&cfi_flash_device); + ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; @@ -716,7 +708,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") .init_early = ap_init_early, .init_irq = ap_init_irq, .handle_irq = fpga_handle_irq, - .timer = &ap_timer, + .init_time = ap_timer_init, .init_machine = ap_init, .restart = integrator_restart, MACHINE_END diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 7322838..2b0db82 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -78,7 +78,7 @@ static void __iomem *intcp_con_base; * fcb00000 cb000000 CP system control */ -static struct map_desc intcp_io_desc[] __initdata = { +static struct map_desc intcp_io_desc[] __initdata __maybe_unused = { { .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), @@ -251,7 +251,7 @@ static void __init intcp_init_early(void) #ifdef CONFIG_OF -static void __init intcp_timer_init_of(void) +static void __init cp_of_timer_init(void) { struct device_node *node; const char *path; @@ -283,10 +283,6 @@ static void __init intcp_timer_init_of(void) sp804_clockevents_init(base, irq, node->name); } -static struct sys_timer cp_of_timer = { - .init = intcp_timer_init_of, -}; - static const struct of_device_id fpga_irq_of_match[] __initconst = { { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, { /* Sentinel */ } @@ -390,7 +386,7 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .init_early = intcp_init_early, .init_irq = intcp_init_irq_of, .handle_irq = fpga_handle_irq, - .timer = &cp_of_timer, + .init_time = cp_of_timer_init, .init_machine = intcp_init_of, .restart = integrator_restart, .dt_compat = intcp_dt_board_compat, @@ -512,7 +508,7 @@ static void __init intcp_init_irq(void) #define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE) #define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE) -static void __init intcp_timer_init(void) +static void __init cp_timer_init(void) { writel(0, TIMER0_VA_BASE + TIMER_CTRL); writel(0, TIMER1_VA_BASE + TIMER_CTRL); @@ -522,10 +518,6 @@ static void __init intcp_timer_init(void) sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1"); } -static struct sys_timer cp_timer = { - .init = intcp_timer_init, -}; - #define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } #define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } @@ -565,7 +557,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") .init_early = intcp_init_early, .init_irq = intcp_init_irq, .handle_irq = fpga_handle_irq, - .timer = &cp_timer, + .init_time = cp_timer_init, .init_machine = intcp_init, .restart = integrator_restart, MACHINE_END diff --git a/arch/arm/mach-iop13xx/include/mach/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h index fa4f805..d3791ec 100644 --- a/arch/arm/mach-iop13xx/include/mach/uncompress.h +++ b/arch/arm/mach-iop13xx/include/mach/uncompress.h @@ -20,4 +20,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index e3f3e7d..02a8228 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -84,17 +84,13 @@ static void __init iq81340mc_timer_init(void) iop_init_time(bus_freq); } -static struct sys_timer iq81340mc_timer = { - .init = iq81340mc_timer_init, -}; - MACHINE_START(IQ81340MC, "Intel IQ81340MC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ .atag_offset = 0x100, .init_early = iop13xx_init_early, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, - .timer = &iq81340mc_timer, + .init_time = iq81340mc_timer_init, .init_machine = iq81340mc_init, .restart = iop13xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index e947441..1b80f10 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -86,17 +86,13 @@ static void __init iq81340sc_timer_init(void) iop_init_time(bus_freq); } -static struct sys_timer iq81340sc_timer = { - .init = iq81340sc_timer_init, -}; - MACHINE_START(IQ81340SC, "Intel IQ81340SC") /* Maintainer: Dan Williams <dan.j.williams@intel.com> */ .atag_offset = 0x100, .init_early = iop13xx_init_early, .map_io = iop13xx_map_io, .init_irq = iop13xx_init_irq, - .timer = &iq81340sc_timer, + .init_time = iq81340sc_timer_init, .init_machine = iq81340sc_init, .restart = iop13xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 9f369f0..31fbb6c 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -40,10 +40,6 @@ static void __init em7210_timer_init(void) iop_init_time(200000000); } -static struct sys_timer em7210_timer = { - .init = em7210_timer_init, -}; - /* * EM7210 RTC */ @@ -205,7 +201,7 @@ MACHINE_START(EM7210, "Lanner EM7210") .atag_offset = 0x100, .map_io = em7210_map_io, .init_irq = iop32x_init_irq, - .timer = &em7210_timer, + .init_time = em7210_timer_init, .init_machine = em7210_init_machine, .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 02e20c3..ac30470 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -44,10 +44,6 @@ static void __init glantank_timer_init(void) iop_init_time(200000000); } -static struct sys_timer glantank_timer = { - .init = glantank_timer_init, -}; - /* * GLAN Tank I/O. @@ -209,7 +205,7 @@ MACHINE_START(GLANTANK, "GLAN Tank") .atag_offset = 0x100, .map_io = glantank_map_io, .init_irq = iop32x_init_irq, - .timer = &glantank_timer, + .init_time = glantank_timer_init, .init_machine = glantank_init_machine, .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h index 4fd7154..b3d45fd 100644 --- a/arch/arm/mach-iop32x/include/mach/uncompress.h +++ b/arch/arm/mach-iop32x/include/mach/uncompress.h @@ -36,4 +36,3 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) * nothing to do */ #define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index ddd1c7e..f2cd296 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -75,10 +75,6 @@ static void __init iq31244_timer_init(void) } } -static struct sys_timer iq31244_timer = { - .init = iq31244_timer_init, -}; - /* * IQ31244 I/O. @@ -314,7 +310,7 @@ MACHINE_START(IQ31244, "Intel IQ31244") .atag_offset = 0x100, .map_io = iq31244_map_io, .init_irq = iop32x_init_irq, - .timer = &iq31244_timer, + .init_time = iq31244_timer_init, .init_machine = iq31244_init_machine, .restart = iop3xx_restart, MACHINE_END @@ -329,7 +325,7 @@ MACHINE_START(EP80219, "Intel EP80219") .atag_offset = 0x100, .map_io = iq31244_map_io, .init_irq = iop32x_init_irq, - .timer = &iq31244_timer, + .init_time = iq31244_timer_init, .init_machine = iq31244_init_machine, .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index bf155e6..015435d 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -43,10 +43,6 @@ static void __init iq80321_timer_init(void) iop_init_time(200000000); } -static struct sys_timer iq80321_timer = { - .init = iq80321_timer_init, -}; - /* * IQ80321 I/O. @@ -188,7 +184,7 @@ MACHINE_START(IQ80321, "Intel IQ80321") .atag_offset = 0x100, .map_io = iq80321_map_io, .init_irq = iop32x_init_irq, - .timer = &iq80321_timer, + .init_time = iq80321_timer_init, .init_machine = iq80321_init_machine, .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 5a7ae91..ea0984a 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -50,10 +50,6 @@ static void __init n2100_timer_init(void) iop_init_time(198000000); } -static struct sys_timer n2100_timer = { - .init = n2100_timer_init, -}; - /* * N2100 I/O. @@ -337,7 +333,7 @@ MACHINE_START(N2100, "Thecus N2100") .atag_offset = 0x100, .map_io = n2100_map_io, .init_irq = iop32x_init_irq, - .timer = &n2100_timer, + .init_time = n2100_timer_init, .init_machine = n2100_init_machine, .restart = n2100_restart, MACHINE_END diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h index f99bb84..ed282e1 100644 --- a/arch/arm/mach-iop33x/include/mach/uncompress.h +++ b/arch/arm/mach-iop33x/include/mach/uncompress.h @@ -34,4 +34,3 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) * nothing to do */ #define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index e74a7de..c43304a 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -45,10 +45,6 @@ static void __init iq80331_timer_init(void) iop_init_time(266000000); } -static struct sys_timer iq80331_timer = { - .init = iq80331_timer_init, -}; - /* * IQ80331 PCI. @@ -143,7 +139,7 @@ MACHINE_START(IQ80331, "Intel IQ80331") .atag_offset = 0x100, .map_io = iop3xx_map_io, .init_irq = iop33x_init_irq, - .timer = &iq80331_timer, + .init_time = iq80331_timer_init, .init_machine = iq80331_init_machine, .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index e2f5bee..8192987 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -45,10 +45,6 @@ static void __init iq80332_timer_init(void) iop_init_time(266000000); } -static struct sys_timer iq80332_timer = { - .init = iq80332_timer_init, -}; - /* * IQ80332 PCI. @@ -143,7 +139,7 @@ MACHINE_START(IQ80332, "Intel IQ80332") .atag_offset = 0x100, .map_io = iop3xx_map_io, .init_irq = iop33x_init_irq, - .timer = &iq80332_timer, + .init_time = iq80332_timer_init, .init_machine = iq80332_init_machine, .restart = iop3xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 90e42e9..6beec15 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -167,7 +167,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = avila_init, #if defined(CONFIG_PCI) @@ -187,7 +187,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = avila_init, #if defined(CONFIG_PCI) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 8c0c0e2..1dbeb7c 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -307,10 +307,6 @@ void __init ixp4xx_timer_init(void) ixp4xx_clockevent_init(); } -struct sys_timer ixp4xx_timer = { - .init = ixp4xx_timer_init, -}; - static struct pxa2xx_udc_mach_info ixp4xx_udc_info; void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info) @@ -523,22 +519,15 @@ static struct clock_event_device clockevent_ixp4xx = { .name = "ixp4xx timer1", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 200, - .shift = 24, .set_mode = ixp4xx_set_mode, .set_next_event = ixp4xx_set_next_event, }; static void __init ixp4xx_clockevent_init(void) { - clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC, - clockevent_ixp4xx.shift); - clockevent_ixp4xx.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx); - clockevent_ixp4xx.min_delta_ns = - clockevent_delta2ns(0xf, &clockevent_ixp4xx); clockevent_ixp4xx.cpumask = cpumask_of(0); - - clockevents_register_device(&clockevent_ixp4xx); + clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ, + 0xf, 0xfffffffe); } void ixp4xx_restart(char mode, const char *cmd) diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 1b83110..820cae8 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -112,7 +112,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = coyote_init, #if defined(CONFIG_PCI) @@ -132,7 +132,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = coyote_init, .restart = ixp4xx_restart, diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 97a0af8..5d413f8 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -226,10 +226,6 @@ static void __init dsmg600_timer_init(void) ixp4xx_timer_init(); } -static struct sys_timer dsmg600_timer = { - .init = dsmg600_timer_init, -}; - static void __init dsmg600_init(void) { ixp4xx_sys_init(); @@ -282,7 +278,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &dsmg600_timer, + .init_time = dsmg600_timer_init, .init_machine = dsmg600_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 9175a25..429966b7 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -272,7 +272,7 @@ MACHINE_START(FSG, "Freecom FSG-3") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = fsg_init, #if defined(CONFIG_PCI) diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index 033c717..3d24b3f 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -99,7 +99,7 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = gateway7001_init, #if defined(CONFIG_PCI) diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index 53b8348..e54ff49 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -498,7 +498,7 @@ MACHINE_START(GORAMO_MLR, "MultiLink") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = gmlr_init, #if defined(CONFIG_PCI) diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 18ebc6b..16a1299 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -167,7 +167,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = gtwx5715_init, #if defined(CONFIG_PCI) diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h index 5bce94a..db5afb6 100644 --- a/arch/arm/mach-ixp4xx/include/mach/platform.h +++ b/arch/arm/mach-ixp4xx/include/mach/platform.h @@ -89,8 +89,6 @@ struct ixp4xx_pata_data { void __iomem *cs1; }; -struct sys_timer; - #define IXP4XX_ETH_NPEA 0x00 #define IXP4XX_ETH_NPEB 0x10 #define IXP4XX_ETH_NPEC 0x20 @@ -125,7 +123,6 @@ extern void ixp4xx_init_early(void); extern void ixp4xx_init_irq(void); extern void ixp4xx_sys_init(void); extern void ixp4xx_timer_init(void); -extern struct sys_timer ixp4xx_timer; extern void ixp4xx_restart(char, const char *); extern void ixp4xx_pci_preinit(void); struct pci_sys_data; diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h index eb945a9..7b25c02 100644 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h @@ -53,6 +53,4 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) */ #define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() - #endif diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 108a9d3..22d688b 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -252,7 +252,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) @@ -268,7 +268,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) @@ -283,7 +283,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) @@ -298,7 +298,7 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = ixdp425_init, #if defined(CONFIG_PCI) diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 33cb095..ed667ce 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -317,7 +317,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .init_machine = nas100d_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index e2903fa..7e55236 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -232,10 +232,6 @@ static void __init nslu2_timer_init(void) ixp4xx_timer_init(); } -static struct sys_timer nslu2_timer = { - .init = nslu2_timer_init, -}; - static void __init nslu2_init(void) { uint8_t __iomem *f; @@ -303,7 +299,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &nslu2_timer, + .init_time = nslu2_timer_init, .init_machine = nslu2_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c index 158ddb7..46a89f5 100644 --- a/arch/arm/mach-ixp4xx/omixp-setup.c +++ b/arch/arm/mach-ixp4xx/omixp-setup.c @@ -245,7 +245,7 @@ MACHINE_START(DEVIXP, "Omicron DEVIXP") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .init_machine = omixp_init, .restart = ixp4xx_restart, MACHINE_END @@ -257,7 +257,7 @@ MACHINE_START(MICCPT, "Omicron MICCPT") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .init_machine = omixp_init, #if defined(CONFIG_PCI) .dma_zone_size = SZ_64M, @@ -272,7 +272,7 @@ MACHINE_START(MIC256, "Omicron MIC256") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .init_machine = omixp_init, .restart = ixp4xx_restart, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index 2798f43..d42730a 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -239,7 +239,7 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = vulcan_init, #if defined(CONFIG_PCI) diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index a785175..8f9ea2f 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -100,7 +100,7 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") .map_io = ixp4xx_map_io, .init_early = ixp4xx_init_early, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .init_time = ixp4xx_timer_init, .atag_offset = 0x100, .init_machine = wg302v2_init, #if defined(CONFIG_PCI) diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 8d2e5a9..d665309 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index de4fd2b..95cc04d 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -98,6 +98,8 @@ static void __init kirkwood_dt_init(void) /* Setup root of clk tree */ kirkwood_of_clk_init(); + kirkwood_cpuidle_init(); + #ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; #endif @@ -183,7 +185,7 @@ DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = orion_dt_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .init_machine = kirkwood_dt_init, .restart = kirkwood_restart, .dt_compat = kirkwood_dt_board_compat, diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index 9f6f496..9a857ae 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/mv643xx_eth.h> -#include <linux/input.h> #include "common.h" static struct mv643xx_eth_platform_data ib62x0_ge00_data = { diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c index 56bfe5a..3264925 100644 --- a/arch/arm/mach-kirkwood/board-mplcec4.c +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -14,7 +14,6 @@ #include <linux/mv643xx_eth.h> #include <linux/platform_data/mmc-mvsdio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data mplcec4_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(1), diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c index f58d2e1..970174a 100644 --- a/arch/arm/mach-kirkwood/board-nsa310.c +++ b/arch/arm/mach-kirkwood/board-nsa310.c @@ -10,12 +10,10 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/i2c.h> #include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> +#include <linux/i2c.h> #include <mach/kirkwood.h> +#include <linux/of.h> #include "common.h" #include "mpp.h" @@ -79,14 +77,10 @@ static void __init nsa310_gpio_init(void) void __init nsa310_init(void) { - u32 dev, rev; - kirkwood_mpp_conf(nsa310_mpp_config); nsa310_gpio_init(); - kirkwood_pcie_id(&dev, &rev); - i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info)); } diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index bac21a5..49792a0 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -499,6 +499,28 @@ void __init kirkwood_wdt_init(void) orion_wdt_init(); } +/***************************************************************************** + * CPU idle + ****************************************************************************/ +static struct resource kirkwood_cpuidle_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = DDR_OPERATION_BASE, + .end = DDR_OPERATION_BASE + 3, + }, +}; + +static struct platform_device kirkwood_cpuidle = { + .name = "kirkwood_cpuidle", + .id = -1, + .resource = kirkwood_cpuidle_resource, + .num_resources = 1, +}; + +void __init kirkwood_cpuidle_init(void) +{ + platform_device_register(&kirkwood_cpuidle); +} /***************************************************************************** * Time handling @@ -530,7 +552,7 @@ static int __init kirkwood_find_tclk(void) return 166666667; } -static void __init kirkwood_timer_init(void) +void __init kirkwood_timer_init(void) { kirkwood_tclk = kirkwood_find_tclk(); @@ -538,10 +560,6 @@ static void __init kirkwood_timer_init(void) IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); } -struct sys_timer kirkwood_timer = { - .init = kirkwood_timer_init, -}; - /***************************************************************************** * Audio ****************************************************************************/ @@ -671,6 +689,7 @@ void __init kirkwood_init(void) kirkwood_xor1_init(); kirkwood_crypto_init(); + kirkwood_cpuidle_init(); #ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; #endif diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 5ffa57f..e956d02 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -50,6 +50,7 @@ void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *)); void kirkwood_audio_init(void); +void kirkwood_cpuidle_init(void); void kirkwood_restart(char, const char *); void kirkwood_clk_init(void); @@ -156,7 +157,7 @@ void kirkwood_xor1_init(void); void kirkwood_crypto_init(void); extern int kirkwood_tclk; -extern struct sys_timer kirkwood_timer; +extern void kirkwood_timer_init(void); #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c deleted file mode 100644 index f730467..0000000 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * arch/arm/mach-kirkwood/cpuidle.c - * - * CPU idle Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * - * The cpu idle uses wait-for-interrupt and DDR self refresh in order - * to implement two idle states - - * #1 wait-for-interrupt - * #2 wait-for-interrupt and DDR self refresh - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/cpuidle.h> -#include <linux/io.h> -#include <linux/export.h> -#include <asm/proc-fns.h> -#include <asm/cpuidle.h> -#include <mach/kirkwood.h> - -#define KIRKWOOD_MAX_STATES 2 - -/* Actual code that puts the SoC in different idle states */ -static int kirkwood_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - writel(0x7, DDR_OPERATION_BASE); - cpu_do_idle(); - - return index; -} - -static struct cpuidle_driver kirkwood_idle_driver = { - .name = "kirkwood_idle", - .owner = THIS_MODULE, - .en_core_tk_irqen = 1, - .states[0] = ARM_CPUIDLE_WFI_STATE, - .states[1] = { - .enter = kirkwood_enter_idle, - .exit_latency = 10, - .target_residency = 100000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "DDR SR", - .desc = "WFI and DDR Self Refresh", - }, - .state_count = KIRKWOOD_MAX_STATES, -}; - -static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); - -/* Initialize CPU idle by registering the idle states */ -static int kirkwood_init_cpuidle(void) -{ - struct cpuidle_device *device; - - device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); - device->state_count = KIRKWOOD_MAX_STATES; - - cpuidle_register_driver(&kirkwood_idle_driver); - if (cpuidle_register_device(device)) { - pr_err("kirkwood_init_cpuidle: Failed registering\n"); - return -EIO; - } - return 0; -} - -device_initcall(kirkwood_init_cpuidle); diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c index 2c1a453..4534180 100644 --- a/arch/arm/mach-kirkwood/d2net_v2-setup.c +++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c @@ -226,6 +226,6 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index c49b177..5a369fe 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -103,6 +103,6 @@ MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c index 791a98f..060ccf9 100644 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -19,7 +19,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" #include "mpp.h" @@ -107,6 +106,6 @@ MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c index 7cb55f9..1c6e736 100644 --- a/arch/arm/mach-kirkwood/guruplug-setup.c +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -126,6 +126,6 @@ MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 041653a..a05563a 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -60,8 +60,9 @@ * Register Map */ #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) +#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) #define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500) -#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418) +#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) #define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) #define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000) diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h index 75d5497..5bca553 100644 --- a/arch/arm/mach-kirkwood/include/mach/uncompress.h +++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h @@ -44,4 +44,3 @@ static void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index 6d8364a..ba384b9 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -167,6 +167,6 @@ MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 728e86d..3b70661 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -263,7 +263,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END #endif @@ -275,7 +275,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END #endif @@ -287,7 +287,7 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c index a3b0914..913d032 100644 --- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -404,7 +404,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END #endif @@ -416,7 +416,7 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 7e81e9b..8ddd69f 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -221,7 +221,7 @@ MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END #endif @@ -234,7 +234,7 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END #endif @@ -247,7 +247,7 @@ MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index a1c3ab6..d96ad4c 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -247,13 +247,9 @@ static struct hw_pci kirkwood_pci __initdata = { static void __init add_pcie_port(int index, void __iomem *base) { - pr_info("Kirkwood PCIe port %d: ", index); - - if (orion_pcie_link_up(base)) { - pr_info("link up\n"); - pcie_port_map[num_pcie_ports++] = index; - } else - pr_info("link down, ignoring\n"); + pcie_port_map[num_pcie_ports++] = index; + pr_info("Kirkwood PCIe port %d: link %s\n", index, + orion_pcie_link_up(base) ? "up" : "down"); } void __init kirkwood_pcie_init(unsigned int portmask) diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 19072c8..e4fd312 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -84,6 +84,6 @@ MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index 9717101..c7d93b4 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -120,6 +120,6 @@ MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 8a17594..55b68fa 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -143,7 +143,7 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END #endif @@ -155,7 +155,7 @@ MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index f2daf71..8736f8c 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -211,6 +211,6 @@ MACHINE_START(T5325, "HP t5325 Thin Client") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 73e2b6c..283abff 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -137,6 +137,6 @@ MACHINE_START(TS219, "QNAP TS-119/TS-219") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index e4c6127..81d5858 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -181,6 +181,6 @@ MACHINE_START(TS41X, "QNAP TS-41x") .map_io = kirkwood_map_io, .init_early = kirkwood_init_early, .init_irq = kirkwood_init_irq, - .timer = &kirkwood_timer, + .init_time = kirkwood_timer_init, .restart = kirkwood_restart, MACHINE_END diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c index b0c306c..456d638 100644 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ b/arch/arm/mach-ks8695/board-acs5k.c @@ -227,6 +227,6 @@ MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = acs5k_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index e0d36ce..d37c218 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -125,6 +125,6 @@ MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = dsm320_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index a827072..3acbdfd 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -57,6 +57,6 @@ MACHINE_START(KS8695, "KS8695 Centaur Development Board") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = micrel_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c index 1623ba4..002bc61 100644 --- a/arch/arm/mach-ks8695/board-og.c +++ b/arch/arm/mach-ks8695/board-og.c @@ -145,7 +145,7 @@ MACHINE_START(CM4002, "OpenGear/CM4002") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = og_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END #endif @@ -157,7 +157,7 @@ MACHINE_START(CM4008, "OpenGear/CM4008") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = og_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END #endif @@ -169,7 +169,7 @@ MACHINE_START(CM41XX, "OpenGear/CM41xx") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = og_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END #endif @@ -181,7 +181,7 @@ MACHINE_START(IM4004, "OpenGear/IM4004") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = og_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END #endif @@ -193,7 +193,7 @@ MACHINE_START(IM42XX, "OpenGear/IM42xx") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = og_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c index f35b98b..fdf2352 100644 --- a/arch/arm/mach-ks8695/board-sg.c +++ b/arch/arm/mach-ks8695/board-sg.c @@ -91,7 +91,7 @@ MACHINE_START(LITE300, "SecureComputing/SG300") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = sg_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END #endif @@ -103,7 +103,7 @@ MACHINE_START(SG310, "McAfee/SG310") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = sg_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END #endif @@ -115,7 +115,7 @@ MACHINE_START(SE4200, "SecureComputing/SE4200") .map_io = ks8695_map_io, .init_irq = ks8695_init_irq, .init_machine = sg_init, - .timer = &ks8695_timer, + .init_time = ks8695_timer_init, .restart = ks8695_restart, MACHINE_END #endif diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h index f8bdb11..6e97ce4 100644 --- a/arch/arm/mach-ks8695/generic.h +++ b/arch/arm/mach-ks8695/generic.h @@ -13,4 +13,4 @@ extern __init void ks8695_map_io(void); extern __init void ks8695_init_irq(void); extern void ks8695_restart(char, const char *); -extern struct sys_timer ks8695_timer; +extern void ks8695_timer_init(void); diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h index 8879d61..c089a1a 100644 --- a/arch/arm/mach-ks8695/include/mach/uncompress.h +++ b/arch/arm/mach-ks8695/include/mach/uncompress.h @@ -32,6 +32,5 @@ static inline void flush(void) } #define arch_decomp_setup() -#define arch_decomp_wdog() #endif diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index 46c84bc..c272a386 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -146,7 +146,7 @@ static void ks8695_timer_setup(void) 0xFFFFFFFFU); } -static void __init ks8695_timer_init (void) +void __init ks8695_timer_init(void) { ks8695_timer_setup(); @@ -154,10 +154,6 @@ static void __init ks8695_timer_init (void) setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq); } -struct sys_timer ks8695_timer = { - .init = ks8695_timer_init, -}; - void ks8695_restart(char mode, const char *cmd) { unsigned int reg; diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index afeac3b..e0b2606 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -25,7 +25,7 @@ /* * Other arch specific structures and functions */ -extern struct sys_timer lpc32xx_timer; +extern void lpc32xx_timer_init(void); extern void __init lpc32xx_init_irq(void); extern void __init lpc32xx_map_io(void); extern void __init lpc32xx_serial_init(void); diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h index c142487..1198a89 100644 --- a/arch/arm/mach-lpc32xx/include/mach/uncompress.h +++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h @@ -55,6 +55,5 @@ static inline void flush(void) /* NULL functions; we don't presently need them */ #define arch_decomp_setup() -#define arch_decomp_wdog() #endif diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index e8ff4c3..c1cd5a9 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -263,7 +263,7 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)") .atag_offset = 0x100, .map_io = lpc32xx_map_io, .init_irq = lpc32xx_init_irq, - .timer = &lpc32xx_timer, + .init_time = lpc32xx_timer_init, .init_machine = lpc3250_machine_init, .dt_compat = lpc32xx_dt_compat, .restart = lpc23xx_restart, diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c index c40667c..20eab63 100644 --- a/arch/arm/mach-lpc32xx/timer.c +++ b/arch/arm/mach-lpc32xx/timer.c @@ -70,7 +70,6 @@ static void lpc32xx_clkevt_mode(enum clock_event_mode mode, static struct clock_event_device lpc32xx_clkevt = { .name = "lpc32xx_clkevt", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 300, .set_next_event = lpc32xx_clkevt_next_event, .set_mode = lpc32xx_clkevt_mode, @@ -100,7 +99,7 @@ static struct irqaction lpc32xx_timer_irq = { * clocks need to be enabled here manually and then tagged as used in * the clock driver initialization */ -static void __init lpc32xx_timer_init(void) +void __init lpc32xx_timer_init(void) { u32 clkrate, pllreg; @@ -141,14 +140,8 @@ static void __init lpc32xx_timer_init(void) setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq); /* Setup the clockevent structure. */ - lpc32xx_clkevt.mult = div_sc(clkrate, NSEC_PER_SEC, - lpc32xx_clkevt.shift); - lpc32xx_clkevt.max_delta_ns = clockevent_delta2ns(-1, - &lpc32xx_clkevt); - lpc32xx_clkevt.min_delta_ns = clockevent_delta2ns(1, - &lpc32xx_clkevt) + 1; lpc32xx_clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&lpc32xx_clkevt); + clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1); /* Use timer1 as clock source. */ __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, @@ -161,8 +154,3 @@ static void __init lpc32xx_timer_init(void) clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE), "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up); } - -struct sys_timer lpc32xx_timer = { - .init = &lpc32xx_timer_init, -}; - diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index e5dba9c..9f64d56 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -262,7 +262,7 @@ MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, - .timer = &pxa168_timer, + .init_time = pxa168_timer_init, .init_machine = common_init, .restart = pxa168_restart, MACHINE_END @@ -271,7 +271,7 @@ MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, - .timer = &pxa168_timer, + .init_time = pxa168_timer_init, .init_machine = common_init, .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 603542a..1f94957 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -45,7 +45,7 @@ MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, - .timer = &pxa168_timer, + .init_time = pxa168_timer_init, .init_machine = avengers_lite_init, .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index 5cb769c..2358011 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -218,7 +218,7 @@ MACHINE_START(BROWNSTONE, "Brownstone Development Platform") .map_io = mmp_map_io, .nr_irqs = BROWNSTONE_NR_IRQS, .init_irq = mmp2_init_irq, - .timer = &mmp2_timer, + .init_time = mmp2_timer_init, .init_machine = brownstone_init, .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index bd45327..0bdc50b 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -1,7 +1,5 @@ #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) -struct sys_timer; - extern void timer_init(int irq); extern void __init icu_init_irq(void); diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 8059cc0..754c352 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -121,7 +121,7 @@ MACHINE_START(FLINT, "Flint Development Platform") .map_io = mmp_map_io, .nr_irqs = FLINT_NR_IRQS, .init_irq = mmp2_init_irq, - .timer = &mmp2_timer, + .init_time = mmp2_timer_init, .init_machine = flint_init, .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index 5c3d61e..d1e2d59 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -194,7 +194,7 @@ MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, - .timer = &pxa168_timer, + .init_time = pxa168_timer_init, .init_machine = gplugd_init, .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index c4ca4d1..0764f4e 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -3,9 +3,7 @@ #include <linux/platform_data/pxa_sdhci.h> -struct sys_timer; - -extern struct sys_timer mmp2_timer; +extern void mmp2_timer_init(void); extern void __init mmp2_init_icu(void); extern void __init mmp2_init_irq(void); extern void mmp2_clear_pmic_int(void); diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 37632d9..7ed1df2 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -1,9 +1,7 @@ #ifndef __ASM_MACH_PXA168_H #define __ASM_MACH_PXA168_H -struct sys_timer; - -extern struct sys_timer pxa168_timer; +extern void pxa168_timer_init(void); extern void __init pxa168_init_irq(void); extern void pxa168_restart(char, const char *); extern void pxa168_clear_keypad_wakeup(void); diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index 3b58a3b..b914afa 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -1,15 +1,14 @@ #ifndef __ASM_MACH_PXA910_H #define __ASM_MACH_PXA910_H -struct sys_timer; - -extern struct sys_timer pxa910_timer; +extern void pxa910_timer_init(void); extern void __init pxa910_init_irq(void); #include <linux/i2c.h> #include <linux/i2c/pxa-i2c.h> #include <mach/devices.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> +#include <video/mmp_disp.h> extern struct pxa_device_desc pxa910_device_uart1; extern struct pxa_device_desc pxa910_device_uart2; @@ -23,7 +22,9 @@ extern struct pxa_device_desc pxa910_device_nand; extern struct platform_device pxa168_device_u2o; extern struct platform_device pxa168_device_u2ootg; extern struct platform_device pxa168_device_u2oehci; - +extern struct pxa_device_desc pxa910_device_disp; +extern struct pxa_device_desc pxa910_device_fb; +extern struct pxa_device_desc pxa910_device_panel; extern struct platform_device pxa910_device_gpio; extern struct platform_device pxa910_device_rtc; diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h index d6daeb7..8890fa8 100644 --- a/arch/arm/mach-mmp/include/mach/uncompress.h +++ b/arch/arm/mach-mmp/include/mach/uncompress.h @@ -43,9 +43,3 @@ static inline void arch_decomp_setup(void) if (machine_is_avengers_lite()) UART = (unsigned long *)UART3_BASE; } - -/* - * nothing to do - */ - -#define arch_decomp_wdog() diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index ff73249..66634fd 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -174,7 +174,7 @@ MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") .map_io = mmp_map_io, .nr_irqs = JASPER_NR_IRQS, .init_irq = mmp2_init_irq, - .timer = &mmp2_timer, + .init_time = mmp2_timer_init, .init_machine = jasper_init, .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index 033cc31..d063efa 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -22,10 +22,6 @@ extern void __init mmp_dt_irq_init(void); extern void __init mmp_dt_init_timer(void); -static struct sys_timer mmp_dt_timer = { - .init = mmp_dt_init_timer, -}; - static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL), @@ -69,7 +65,7 @@ static const char *mmp_dt_board_compat[] __initdata = { DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)") .map_io = mmp_map_io, .init_irq = mmp_dt_irq_init, - .timer = &mmp_dt_timer, + .init_time = mmp_dt_init_timer, .init_machine = pxa168_dt_init, .dt_compat = mmp_dt_board_compat, MACHINE_END @@ -77,7 +73,7 @@ MACHINE_END DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)") .map_io = mmp_map_io, .init_irq = mmp_dt_irq_init, - .timer = &mmp_dt_timer, + .init_time = mmp_dt_init_timer, .init_machine = pxa910_dt_init, .dt_compat = mmp_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index 535a5ed..fad431a 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -24,10 +24,6 @@ extern void __init mmp_dt_irq_init(void); extern void __init mmp_dt_init_timer(void); -static struct sys_timer mmp_dt_timer = { - .init = mmp_dt_init_timer, -}; - static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL), @@ -54,7 +50,7 @@ static const char *mmp2_dt_board_compat[] __initdata = { DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)") .map_io = mmp_map_io, .init_irq = mmp_dt_irq_init, - .timer = &mmp_dt_timer, + .init_time = mmp_dt_init_timer, .init_machine = mmp2_dt_init, .dt_compat = mmp2_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 3a3768c..d94d114 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -114,7 +114,7 @@ postcore_initcall(mmp2_init); #define APBC_TIMERS APBC_REG(0x024) -static void __init mmp2_timer_init(void) +void __init mmp2_timer_init(void) { unsigned long clk_rst; @@ -130,10 +130,6 @@ static void __init mmp2_timer_init(void) timer_init(IRQ_MMP2_TIMER1); } -struct sys_timer mmp2_timer = { - .init = mmp2_timer_init, -}; - /* on-chip devices */ MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5); MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21); diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index b7f074f..9bc7b86 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -67,7 +67,7 @@ postcore_initcall(pxa168_init); #define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) #define APBC_TIMERS APBC_REG(0x34) -static void __init pxa168_timer_init(void) +void __init pxa168_timer_init(void) { /* this is early, we have to initialize the CCU registers by * ourselves instead of using clk_* API. Clock rate is defined @@ -81,10 +81,6 @@ static void __init pxa168_timer_init(void) timer_init(IRQ_PXA168_TIMER1); } -struct sys_timer pxa168_timer = { - .init = pxa168_timer_init, -}; - void pxa168_clear_keypad_wakeup(void) { uint32_t val; diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 8b1e16f..36cb321 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -101,7 +101,7 @@ postcore_initcall(pxa910_init); #define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) #define APBC_TIMERS APBC_REG(0x34) -static void __init pxa910_timer_init(void) +void __init pxa910_timer_init(void) { /* reset and configure */ __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); @@ -110,10 +110,6 @@ static void __init pxa910_timer_init(void) timer_init(IRQ_PXA910_AP1_TIMER1); } -struct sys_timer pxa910_timer = { - .init = pxa910_timer_init, -}; - /* on-chip devices */ /* NOTE: there are totally 3 UARTs on PXA910: @@ -138,6 +134,9 @@ PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10); PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10); PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10); PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); +PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec); +PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0); +PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0); struct resource pxa910_resource_gpio[] = { { diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index b28f908..4c127d2 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -103,7 +103,7 @@ MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa910_init_irq, - .timer = &pxa910_timer, + .init_time = pxa910_timer_init, .init_machine = tavorevb_init, .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index dd30ea7..8609967 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -86,7 +86,7 @@ MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform") .map_io = mmp_map_io, .nr_irqs = MMP_NR_IRQS, .init_irq = pxa168_init_irq, - .timer = &pxa168_timer, + .init_time = pxa168_timer_init, .init_machine = teton_bga_init, .restart = pxa168_restart, MACHINE_END diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 936447c..86a18b3 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -141,7 +141,6 @@ static void timer_set_mode(enum clock_event_mode mode, static struct clock_event_device ckevt = { .name = "clockevent", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 200, .set_next_event = timer_set_next_event, .set_mode = timer_set_mode, @@ -198,15 +197,13 @@ void __init timer_init(int irq) setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE); - ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift); - ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt); - ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt); ckevt.cpumask = cpumask_of(0); setup_irq(irq, &timer_irq); clocksource_register_hz(&cksrc, CLOCK_TICK_RATE); - clockevents_register_device(&ckevt); + clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE, + MIN_DELTA, MAX_DELTA); } #ifdef CONFIG_OF diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index ce55fd8..22a9058 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/mfd/88pm860x.h> #include <linux/platform_data/mv_usb.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -184,6 +186,92 @@ static struct pxa3xx_nand_platform_data dkb_nand_info = { }; #endif +#ifdef CONFIG_MMP_DISP +/* path config */ +#define CFG_IOPADMODE(iopad) (iopad) /* 0x0 ~ 0xd */ +#define SCLK_SOURCE_SELECT(x) (x << 30) /* 0x0 ~ 0x3 */ +/* link config */ +#define CFG_DUMBMODE(mode) (mode << 28) /* 0x0 ~ 0x6*/ +#define CFG_GRA_SWAPRB(x) (x << 0) /* 1: rbswap enabled */ +static struct mmp_mach_path_config dkb_disp_config[] = { + [0] = { + .name = "mmp-parallel", + .overlay_num = 2, + .output_type = PATH_OUT_PARALLEL, + .path_config = CFG_IOPADMODE(0x1) + | SCLK_SOURCE_SELECT(0x1), + .link_config = CFG_DUMBMODE(0x2) + | CFG_GRA_SWAPRB(0x1), + }, +}; + +static struct mmp_mach_plat_info dkb_disp_info = { + .name = "mmp-disp", + .clk_name = "disp0", + .path_num = 1, + .paths = dkb_disp_config, +}; + +static struct mmp_buffer_driver_mach_info dkb_fb_info = { + .name = "mmp-fb", + .path_name = "mmp-parallel", + .overlay_id = 0, + .dmafetch_id = 1, + .default_pixfmt = PIXFMT_RGB565, +}; + +static void dkb_tpo_panel_power(int on) +{ + int err; + u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106); + + if (on) { + err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET"); + if (err) { + pr_err("failed to request GPIO for TPO LCD RESET\n"); + return; + } + gpio_direction_output(spi_reset, 0); + udelay(100); + gpio_set_value(spi_reset, 1); + gpio_free(spi_reset); + } else { + err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET"); + if (err) { + pr_err("failed to request LCD RESET gpio\n"); + return; + } + gpio_set_value(spi_reset, 0); + gpio_free(spi_reset); + } +} + +static struct mmp_mach_panel_info dkb_tpo_panel_info = { + .name = "tpo-hvga", + .plat_path_name = "mmp-parallel", + .plat_set_onoff = dkb_tpo_panel_power, +}; + +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "tpo-hvga", + .platform_data = &dkb_tpo_panel_info, + .bus_num = 5, + } +}; + +static void __init add_disp(void) +{ + pxa_register_device(&pxa910_device_disp, + &dkb_disp_info, sizeof(dkb_disp_info)); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + pxa_register_device(&pxa910_device_fb, + &dkb_fb_info, sizeof(dkb_fb_info)); + pxa_register_device(&pxa910_device_panel, + &dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info)); +} +#endif + static void __init ttc_dkb_init(void) { mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config)); @@ -212,13 +300,17 @@ static void __init ttc_dkb_init(void) pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata; platform_device_register(&pxa168_device_u2ootg); #endif + +#ifdef CONFIG_MMP_DISP + add_disp(); +#endif } MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform") .map_io = mmp_map_io, .nr_irqs = TTCDKB_NR_IRQS, .init_irq = pxa910_init_irq, - .timer = &pxa910_timer, + .init_time = pxa910_timer_init, .init_machine = ttc_dkb_init, .restart = mmp_restart, MACHINE_END diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c index b5b4de2..7dcfc53 100644 --- a/arch/arm/mach-msm/board-dt-8660.c +++ b/arch/arm/mach-msm/board-dt-8660.c @@ -11,26 +11,15 @@ */ #include <linux/init.h> +#include <linux/irqchip.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <mach/board.h> #include "common.h" -static const struct of_device_id msm_dt_gic_match[] __initconst = { - { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, - {} -}; - -static void __init msm8x60_init_irq(void) -{ - of_irq_init(msm_dt_gic_match); -} - static void __init msm8x60_init_late(void) { smd_debugfs_init(); @@ -55,10 +44,9 @@ static const char *msm8x60_fluid_match[] __initdata = { DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") .smp = smp_ops(msm_smp_ops), .map_io = msm_map_msm8x60_io, - .init_irq = msm8x60_init_irq, - .handle_irq = gic_handle_irq, + .init_irq = irqchip_init, .init_machine = msm8x60_dt_init, .init_late = msm8x60_init_late, - .timer = &msm_dt_timer, + .init_time = msm_dt_timer_init, .dt_compat = msm8x60_fluid_match, MACHINE_END diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c index 4490edb..7301936 100644 --- a/arch/arm/mach-msm/board-dt-8960.c +++ b/arch/arm/mach-msm/board-dt-8960.c @@ -11,24 +11,13 @@ */ #include <linux/init.h> -#include <linux/of_irq.h> +#include <linux/irqchip.h> #include <linux/of_platform.h> -#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include "common.h" -static const struct of_device_id msm_dt_gic_match[] __initconst = { - { .compatible = "qcom,msm-qgic2", .data = gic_of_init }, - { } -}; - -static void __init msm_dt_init_irq(void) -{ - of_irq_init(msm_dt_gic_match); -} - static void __init msm_dt_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -42,9 +31,8 @@ static const char * const msm8960_dt_match[] __initconst = { DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)") .smp = smp_ops(msm_smp_ops), .map_io = msm_map_msm8960_io, - .init_irq = msm_dt_init_irq, - .timer = &msm_dt_timer, + .init_irq = irqchip_init, + .init_time = msm_dt_timer_init, .init_machine = msm_dt_init, .dt_compat = msm8960_dt_match, - .handle_irq = gic_handle_irq, MACHINE_END diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 6ce542e..84d720a 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -106,5 +106,5 @@ MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") .init_irq = halibut_init_irq, .init_machine = halibut_init, .init_late = halibut_init_late, - .timer = &msm7x01_timer, + .init_time = msm7x01_timer_init, MACHINE_END diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index df00bc0..30c3496 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -75,7 +75,7 @@ static void __init mahimahi_init_late(void) smd_debugfs_init(); } -extern struct sys_timer msm_timer; +void msm_timer_init(void); MACHINE_START(MAHIMAHI, "mahimahi") .atag_offset = 0x100, @@ -84,5 +84,5 @@ MACHINE_START(MAHIMAHI, "mahimahi") .init_irq = msm_init_irq, .init_machine = mahimahi_init, .init_late = mahimahi_init_late, - .timer = &msm_timer, + .init_time = msm_timer_init, MACHINE_END diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index effa6f4..7bc3f82 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -131,7 +131,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, .init_late = msm7x30_init_late, - .timer = &msm7x30_timer, + .init_time = msm7x30_timer_init, MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") @@ -142,7 +142,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, .init_late = msm7x30_init_late, - .timer = &msm7x30_timer, + .init_time = msm7x30_timer_init, MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") @@ -153,5 +153,5 @@ MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, .init_late = msm7x30_init_late, - .timer = &msm7x30_timer, + .init_time = msm7x30_timer_init, MACHINE_END diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 2448fcf..686e794 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -200,7 +200,7 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, .init_late = qsd8x50_init_late, - .timer = &qsd8x50_timer, + .init_time = qsd8x50_timer_init, MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") @@ -209,5 +209,5 @@ MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, .init_late = qsd8x50_init_late, - .timer = &qsd8x50_timer, + .init_time = qsd8x50_timer_init, MACHINE_END diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index b7b0fc7..7073011 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -53,7 +53,7 @@ static struct platform_device *devices[] __initdata = { &msm_device_uart3, }; -extern struct sys_timer msm_timer; +void msm_timer_init(void); static void __init sapphire_init_irq(void) { @@ -113,5 +113,5 @@ MACHINE_START(SAPPHIRE, "sapphire") .init_irq = sapphire_init_irq, .init_machine = sapphire_init, .init_late = sapphire_init_late, - .timer = &msm_timer, + .init_time = msm_timer_init, MACHINE_END diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 4ba0800..919bfa3 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -110,5 +110,5 @@ MACHINE_START(TROUT, "HTC Dream") .init_irq = trout_init_irq, .init_machine = trout_init, .init_late = trout_init_late, - .timer = &msm7x01_timer, + .init_time = msm7x01_timer_init, MACHINE_END diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index 633a7159..ce8215a 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -12,10 +12,10 @@ #ifndef __MACH_COMMON_H #define __MACH_COMMON_H -extern struct sys_timer msm7x01_timer; -extern struct sys_timer msm7x30_timer; -extern struct sys_timer msm_dt_timer; -extern struct sys_timer qsd8x50_timer; +extern void msm7x01_timer_init(void); +extern void msm7x30_timer_init(void); +extern void msm_dt_timer_init(void); +extern void qsd8x50_timer_init(void); extern void msm_map_common_io(void); extern void msm_map_msm7x30_io(void); diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h index c14011f..fa97a10 100644 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ b/arch/arm/mach-msm/include/mach/uncompress.h @@ -60,8 +60,4 @@ static inline void arch_decomp_setup(void) { } -static inline void arch_decomp_wdog(void) -{ -} - #endif diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 7ed69b69..42932865 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -15,8 +15,8 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> -#include <asm/hardware/gic.h> #include <asm/cacheflush.h> #include <asm/cputype.h> #include <asm/mach-types.h> @@ -115,7 +115,7 @@ static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *id * the boot monitor to read the system wide flags register, * and branch to the address found there. */ - gic_raise_softirq(cpumask_of(cpu), 0); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { @@ -153,8 +153,6 @@ static void __init msm_smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init msm_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h index 12da4ca..e8d043a 100644 --- a/arch/arm/mach-msm/proc_comm.h +++ b/arch/arm/mach-msm/proc_comm.h @@ -253,6 +253,6 @@ enum { (((drvstr) & 0xF) << 17)) int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2); -void __init proc_comm_boot_wait(void); +void proc_comm_boot_wait(void); #endif diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 476549a..2969027 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -25,7 +25,6 @@ #include <linux/of_irq.h> #include <asm/mach/time.h> -#include <asm/hardware/gic.h> #include <asm/localtimer.h> #include <asm/sched_clock.h> @@ -144,13 +143,9 @@ static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt) evt->rating = msm_clockevent.rating; evt->set_mode = msm_timer_set_mode; evt->set_next_event = msm_timer_set_next_event; - evt->shift = msm_clockevent.shift; - evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift); - evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt); - evt->min_delta_ns = clockevent_delta2ns(4, evt); *__this_cpu_ptr(msm_evt.percpu_evt) = evt; - clockevents_register_device(evt); + clockevents_config_and_register(evt, GPT_HZ, 4, 0xf0000000); enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING); return 0; } @@ -229,7 +224,7 @@ static const struct of_device_id msm_gpt_match[] __initconst = { { }, }; -static void __init msm_dt_timer_init(void) +void __init msm_dt_timer_init(void) { struct device_node *np; u32 freq; @@ -296,10 +291,6 @@ static void __init msm_dt_timer_init(void) msm_timer_init(freq, 32, irq, !!percpu_offset); } - -struct sys_timer msm_dt_timer = { - .init = msm_dt_timer_init -}; #endif static int __init msm_timer_map(phys_addr_t event, phys_addr_t source) @@ -317,7 +308,7 @@ static int __init msm_timer_map(phys_addr_t event, phys_addr_t source) return 0; } -static void __init msm7x01_timer_init(void) +void __init msm7x01_timer_init(void) { struct clocksource *cs = &msm_clocksource; @@ -330,28 +321,16 @@ static void __init msm7x01_timer_init(void) false); } -struct sys_timer msm7x01_timer = { - .init = msm7x01_timer_init -}; - -static void __init msm7x30_timer_init(void) +void __init msm7x30_timer_init(void) { if (msm_timer_map(0xc0100004, 0xc0100024)) return; msm_timer_init(24576000 / 4, 32, 1, false); } -struct sys_timer msm7x30_timer = { - .init = msm7x30_timer_init -}; - -static void __init qsd8x50_timer_init(void) +void __init qsd8x50_timer_init(void) { if (msm_timer_map(0xAC100000, 0xAC100010)) return; msm_timer_init(19200000 / 4, 32, 7, false); } - -struct sys_timer qsd8x50_timer = { - .init = qsd8x50_timer_init -}; diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c index ee74ec9..1f2ef98 100644 --- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c +++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c @@ -150,6 +150,6 @@ MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL") .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, .init_irq = mv78xx0_init_irq, - .timer = &mv78xx0_timer, + .init_time = mv78xx0_timer_init, .restart = mv78xx0_restart, MACHINE_END diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index d0cb485..0efa144 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -336,16 +336,12 @@ void __init mv78xx0_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); } -static void __init_refok mv78xx0_timer_init(void) +void __init_refok mv78xx0_timer_init(void) { orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_MV78XX0_TIMER_1, get_tclk()); } -struct sys_timer mv78xx0_timer = { - .init = mv78xx0_timer_init, -}; - /***************************************************************************** * General diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h index 507c767..5e9485b 100644 --- a/arch/arm/mach-mv78xx0/common.h +++ b/arch/arm/mach-mv78xx0/common.h @@ -47,7 +47,7 @@ void mv78xx0_uart3_init(void); void mv78xx0_i2c_init(void); void mv78xx0_restart(char, const char *); -extern struct sys_timer mv78xx0_timer; +extern void mv78xx0_timer_init(void); #endif diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index 4d6d48b..4e0f22b 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -98,6 +98,6 @@ MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board") .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, .init_irq = mv78xx0_init_irq, - .timer = &mv78xx0_timer, + .init_time = mv78xx0_timer_init, .restart = mv78xx0_restart, MACHINE_END diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h index 3652642..6a761c4 100644 --- a/arch/arm/mach-mv78xx0/include/mach/uncompress.h +++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h @@ -44,4 +44,3 @@ static void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c index 9a88270..d2d06f3 100644 --- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c +++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c @@ -83,6 +83,6 @@ MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board") .map_io = mv78xx0_map_io, .init_early = mv78xx0_init_early, .init_irq = mv78xx0_init_irq, - .timer = &mv78xx0_timer, + .init_time = mv78xx0_timer_init, .restart = mv78xx0_restart, MACHINE_END diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 99df4df..da93bcb 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -3,7 +3,8 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a -obj-y += system-controller.o -obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o +obj-y += system-controller.o +obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o +obj-$(CONFIG_ARCH_MVEBU) += addr-map.o coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 7434b5e..a5ea616d 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -56,10 +56,6 @@ void __init armada_370_xp_init_early(void) init_dma_coherent_pool_size(SZ_1M); } -struct sys_timer armada_370_xp_timer = { - .init = armada_370_xp_timer_and_clk_init, -}; - static void __init armada_370_xp_dt_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -78,7 +74,7 @@ DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)") .init_early = armada_370_xp_init_early, .init_irq = armada_370_xp_init_irq, .handle_irq = armada_370_xp_handle_irq, - .timer = &armada_370_xp_timer, + .init_time = armada_370_xp_timer_and_clk_init, .restart = mvebu_restart, .dt_compat = armada_370_xp_dt_compat, MACHINE_END diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h index ef28114..533f518 100644 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -72,6 +72,5 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } #define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() #endif /* __MACH_MXS_UNCOMPRESS_H__ */ diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index c66129b..0521867 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -119,6 +119,23 @@ static struct fb_videomode apf28dev_video_modes[] = { }, }; +static struct fb_videomode cfa10049_video_modes[] = { + { + .name = "Himax HX8357-B", + .refresh = 60, + .xres = 320, + .yres = 480, + .pixclock = 108506, /* picosecond (9.216 MHz) */ + .left_margin = 2, + .right_margin = 2, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 15, + .vsync_len = 15, + .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT + }, +}; + static struct mxsfb_platform_data mxsfb_pdata __initdata; /* @@ -163,19 +180,11 @@ static void __init imx23_timer_init(void) mx23_clocks_init(); } -static struct sys_timer imx23_timer = { - .init = imx23_timer_init, -}; - static void __init imx28_timer_init(void) { mx28_clocks_init(); } -static struct sys_timer imx28_timer = { - .init = imx28_timer_init, -}; - enum mac_oui { OUI_FSL, OUI_DENX, @@ -395,6 +404,17 @@ static void __init cfa10049_init(void) update_fec_mac_prop(OUI_CRYSTALFONTZ); } +static void __init cfa10037_init(void) +{ + enable_clk_enet_out(); + update_fec_mac_prop(OUI_CRYSTALFONTZ); + + mxsfb_pdata.mode_list = cfa10049_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes); + mxsfb_pdata.default_bpp = 32; + mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; +} + static void __init apf28_init(void) { enable_clk_enet_out(); @@ -415,6 +435,8 @@ static void __init mxs_machine_init(void) m28evk_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); + else if (of_machine_is_compatible("crystalfontz,cfa10037")) + cfa10037_init(); else if (of_machine_is_compatible("crystalfontz,cfa10049")) cfa10049_init(); else if (of_machine_is_compatible("armadeus,imx28-apf28")) @@ -446,7 +468,7 @@ DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)") .map_io = mx23_map_io, .init_irq = icoll_init_irq, .handle_irq = icoll_handle_irq, - .timer = &imx23_timer, + .init_time = imx23_timer_init, .init_machine = mxs_machine_init, .dt_compat = imx23_dt_compat, .restart = mxs_restart, @@ -456,7 +478,7 @@ DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)") .map_io = mx28_map_io, .init_irq = icoll_init_irq, .handle_irq = icoll_handle_irq, - .timer = &imx28_timer, + .init_time = imx28_timer_init, .init_machine = mxs_machine_init, .dt_compat = imx28_dt_compat, .restart = mxs_restart, diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c index 856f4c7..4210204 100644 --- a/arch/arm/mach-mxs/timer.c +++ b/arch/arm/mach-mxs/timer.c @@ -72,8 +72,9 @@ #define BM_TIMROT_TIMCTRLn_IRQ_EN (1 << 14) #define BM_TIMROT_TIMCTRLn_IRQ (1 << 15) #define BP_TIMROT_TIMCTRLn_SELECT 0 -#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 -#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb +#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL 0x8 +#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL 0xb +#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS 0xf static struct clock_event_device mxs_clockevent_device; static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED; @@ -195,7 +196,6 @@ static void mxs_set_mode(enum clock_event_mode mode, static struct clock_event_device mxs_clockevent_device = { .name = "mxs_timrot", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .set_mode = mxs_set_mode, .set_next_event = timrotv2_set_next_event, .rating = 200, @@ -203,25 +203,13 @@ static struct clock_event_device mxs_clockevent_device = { static int __init mxs_clockevent_init(struct clk *timer_clk) { - unsigned int c = clk_get_rate(timer_clk); - - mxs_clockevent_device.mult = - div_sc(c, NSEC_PER_SEC, mxs_clockevent_device.shift); - mxs_clockevent_device.cpumask = cpumask_of(0); - if (timrot_is_v1()) { + if (timrot_is_v1()) mxs_clockevent_device.set_next_event = timrotv1_set_next_event; - mxs_clockevent_device.max_delta_ns = - clockevent_delta2ns(0xfffe, &mxs_clockevent_device); - mxs_clockevent_device.min_delta_ns = - clockevent_delta2ns(0xf, &mxs_clockevent_device); - } else { - mxs_clockevent_device.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &mxs_clockevent_device); - mxs_clockevent_device.min_delta_ns = - clockevent_delta2ns(0xf, &mxs_clockevent_device); - } - - clockevents_register_device(&mxs_clockevent_device); + mxs_clockevent_device.cpumask = cpumask_of(0); + clockevents_config_and_register(&mxs_clockevent_device, + clk_get_rate(timer_clk), + timrot_is_v1() ? 0xf : 0x2, + timrot_is_v1() ? 0xfffe : 0xfffffffe); return 0; } @@ -288,7 +276,7 @@ void __init mxs_timer_init(void) /* one for clock_event */ __raw_writel((timrot_is_v1() ? BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : - BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) | + BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | BM_TIMROT_TIMCTRLn_UPDATE | BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base + HW_TIMROT_TIMCTRLn(0)); @@ -296,7 +284,7 @@ void __init mxs_timer_init(void) /* another for clocksource */ __raw_writel((timrot_is_v1() ? BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL : - BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) | + BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) | BM_TIMROT_TIMCTRLn_RELOAD, mxs_timrot_base + HW_TIMROT_TIMCTRLn(1)); diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index aa62746..27c2cb7 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -23,9 +23,9 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/irqchip/arm-vic.h> #include <mach/hardware.h> #include <asm/mach/map.h> -#include <asm/hardware/vic.h> #include <mach/netx-regs.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h index 9b91511..768b26b 100644 --- a/arch/arm/mach-netx/generic.h +++ b/arch/arm/mach-netx/generic.h @@ -21,5 +21,4 @@ extern void __init netx_map_io(void); extern void __init netx_init_irq(void); extern void netx_restart(char, const char *); -struct sys_timer; -extern struct sys_timer netx_timer; +extern void netx_timer_init(void); diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h index 84f9128..5cb1051b 100644 --- a/arch/arm/mach-netx/include/mach/uncompress.h +++ b/arch/arm/mach-netx/include/mach/uncompress.h @@ -73,4 +73,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c index 8b781ff..9b558eb 100644 --- a/arch/arm/mach-netx/nxdb500.c +++ b/arch/arm/mach-netx/nxdb500.c @@ -28,7 +28,6 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware/vic.h> #include <mach/netx-regs.h> #include <linux/platform_data/eth-netx.h> @@ -204,8 +203,7 @@ MACHINE_START(NXDB500, "Hilscher nxdb500") .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &netx_timer, + .init_time = netx_timer_init, .init_machine = nxdb500_init, .restart = netx_restart, MACHINE_END diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c index b26dbce..a5e86cd 100644 --- a/arch/arm/mach-netx/nxdkn.c +++ b/arch/arm/mach-netx/nxdkn.c @@ -28,7 +28,6 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware/vic.h> #include <mach/netx-regs.h> #include <linux/platform_data/eth-netx.h> @@ -97,8 +96,7 @@ MACHINE_START(NXDKN, "Hilscher nxdkn") .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &netx_timer, + .init_time = netx_timer_init, .init_machine = nxdkn_init, .restart = netx_restart, MACHINE_END diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c index 257382e..ad17885 100644 --- a/arch/arm/mach-netx/nxeb500hmi.c +++ b/arch/arm/mach-netx/nxeb500hmi.c @@ -28,7 +28,6 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware/vic.h> #include <mach/netx-regs.h> #include <linux/platform_data/eth-netx.h> @@ -181,8 +180,7 @@ MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi") .atag_offset = 0x100, .map_io = netx_map_io, .init_irq = netx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &netx_timer, + .init_time = netx_timer_init, .init_machine = nxeb500hmi_init, .restart = netx_restart, MACHINE_END diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index e24c141..6df42e6 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -76,7 +76,6 @@ static int netx_set_next_event(unsigned long evt, static struct clock_event_device netx_clockevent = { .name = "netx-timer" __stringify(TIMER_CLOCKEVENT), - .shift = 32, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_next_event = netx_set_next_event, .set_mode = netx_set_mode, @@ -107,7 +106,7 @@ static struct irqaction netx_timer_irq = { /* * Set up timer interrupt */ -static void __init netx_timer_init(void) +void __init netx_timer_init(void) { /* disable timer initially */ writel(0, NETX_GPIO_COUNTER_CTRL(0)); @@ -140,18 +139,9 @@ static void __init netx_timer_init(void) clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE), "netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up); - netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, - netx_clockevent.shift); - netx_clockevent.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &netx_clockevent); /* with max_delta_ns >= delta2ns(0x800) the system currently runs fine. * Adding some safety ... */ - netx_clockevent.min_delta_ns = - clockevent_delta2ns(0xa00, &netx_clockevent); netx_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&netx_clockevent); + clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE, + 0xa00, 0xfffffffe); } - -struct sys_timer netx_timer = { - .init = netx_timer_init, -}; diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 706dc57..82226a5 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -4,19 +4,13 @@ menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" - select CLKSRC_NOMADIK_MTU select NOMADIK_8815 + select I2C + select I2C_ALGOBIT endmenu config NOMADIK_8815 bool -config I2C_BITBANG_8815NHK - tristate "Driver for bit-bang busses found on the 8815 NHK" - depends on I2C && MACH_NOMADIK_8815NHK - depends on PINCTRL_NOMADIK - default y - select I2C_ALGOBIT - endif diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index a42c9a3..1071c3b 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -9,9 +9,3 @@ # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o - -# Specific board support -obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o - -# Nomadik extra devices -obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c deleted file mode 100644 index 9f19069..0000000 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ /dev/null @@ -1,359 +0,0 @@ -/* - * linux/arch/arm/mach-nomadik/board-8815nhk.c - * - * Copyright (C) STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * - * NHK15 board specifc driver definition - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/amba/mmci.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/fsmc.h> -#include <linux/mtd/onenand.h> -#include <linux/mtd/partitions.h> -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/pinctrl/machine.h> -#include <linux/platform_data/pinctrl-nomadik.h> -#include <linux/platform_data/clocksource-nomadik-mtu.h> -#include <asm/hardware/vic.h> -#include <asm/sizes.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> -#include <asm/mach/time.h> -#include <mach/irqs.h> - -#include "cpu-8815.h" - -/* Initial value for SRC control register: all timers use MXTAL/8 source */ -#define SRC_CR_INIT_MASK 0x00007fff -#define SRC_CR_INIT_VAL 0x2aaa8000 - -#define ALE_OFF 0x1000000 -#define CLE_OFF 0x800000 - -/* These addresses span 16MB, so use three individual pages */ -static struct resource nhk8815_nand_resources[] = { - { - .name = "nand_data", - .start = 0x40000000, - .end = 0x40000000 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "nand_addr", - .start = 0x40000000 + ALE_OFF, - .end = 0x40000000 +ALE_OFF + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "nand_cmd", - .start = 0x40000000 + CLE_OFF, - .end = 0x40000000 + CLE_OFF + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "fsmc_regs", - .start = NOMADIK_FSMC_BASE, - .end = NOMADIK_FSMC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -/* - * These partitions are the same as those used in the 2.6.20 release - * shipped by the vendor; the first two partitions are mandated - * by the boot ROM, and the bootloader area is somehow oversized... - */ -static struct mtd_partition nhk8815_partitions[] = { - { - .name = "X-Loader(NAND)", - .offset = 0, - .size = SZ_256K, - }, { - .name = "MemInit(NAND)", - .offset = MTDPART_OFS_APPEND, - .size = SZ_256K, - }, { - .name = "BootLoader(NAND)", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - }, { - .name = "Kernel zImage(NAND)", - .offset = MTDPART_OFS_APPEND, - .size = 3 * SZ_1M, - }, { - .name = "Root Filesystem(NAND)", - .offset = MTDPART_OFS_APPEND, - .size = 22 * SZ_1M, - }, { - .name = "User Filesystem(NAND)", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct fsmc_nand_timings nhk8815_nand_timings = { - .thiz = 0, - .thold = 0x10, - .twait = 0x0A, - .tset = 0, -}; - -static struct fsmc_nand_platform_data nhk8815_nand_platform_data = { - .nand_timings = &nhk8815_nand_timings, - .partitions = nhk8815_partitions, - .nr_partitions = ARRAY_SIZE(nhk8815_partitions), - .width = FSMC_NAND_BW8, -}; - -static struct platform_device nhk8815_nand_device = { - .name = "fsmc-nand", - .id = -1, - .resource = nhk8815_nand_resources, - .num_resources = ARRAY_SIZE(nhk8815_nand_resources), - .dev = { - .platform_data = &nhk8815_nand_platform_data, - }, -}; - -/* These are the partitions for the OneNand device, different from above */ -static struct mtd_partition nhk8815_onenand_partitions[] = { - { - .name = "X-Loader(OneNAND)", - .offset = 0, - .size = SZ_256K, - }, { - .name = "MemInit(OneNAND)", - .offset = MTDPART_OFS_APPEND, - .size = SZ_256K, - }, { - .name = "BootLoader(OneNAND)", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M-SZ_256K, - }, { - .name = "SysImage(OneNAND)", - .offset = MTDPART_OFS_APPEND, - .size = 4 * SZ_1M, - }, { - .name = "Root Filesystem(OneNAND)", - .offset = MTDPART_OFS_APPEND, - .size = 22 * SZ_1M, - }, { - .name = "User Filesystem(OneNAND)", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct onenand_platform_data nhk8815_onenand_data = { - .parts = nhk8815_onenand_partitions, - .nr_parts = ARRAY_SIZE(nhk8815_onenand_partitions), -}; - -static struct resource nhk8815_onenand_resource[] = { - { - .start = 0x30000000, - .end = 0x30000000 + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nhk8815_onenand_device = { - .name = "onenand-flash", - .id = -1, - .dev = { - .platform_data = &nhk8815_onenand_data, - }, - .resource = nhk8815_onenand_resource, - .num_resources = ARRAY_SIZE(nhk8815_onenand_resource), -}; - -/* bus control reg. and bus timing reg. for CS0..CS3 */ -#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3)) -#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04) - -static void __init nhk8815_onenand_init(void) -{ -#ifdef CONFIG_MTD_ONENAND - /* Set up SMCS0 for OneNand */ - writel(0x000030db, FSMC_BCR(0)); - writel(0x02100551, FSMC_BTR(0)); -#endif -} - -static struct mmci_platform_data mmcsd_plat_data = { - .ocr_mask = MMC_VDD_29_30, - .f_max = 48000000, - .gpio_wp = -1, - .gpio_cd = 111, - .cd_invert = true, - .capabilities = MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA, -}; - -static int __init nhk8815_mmcsd_init(void) -{ - int ret; - - ret = gpio_request(112, "card detect bias"); - if (ret) - return ret; - gpio_direction_output(112, 0); - amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180); - return 0; -} -module_init(nhk8815_mmcsd_init); - -static struct resource nhk8815_eth_resources[] = { - { - .name = "smc91x-regs", - .start = 0x34000000 + 0x300, - .end = 0x34000000 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = NOMADIK_GPIO_TO_IRQ(115), - .end = NOMADIK_GPIO_TO_IRQ(115), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, - } -}; - -static struct platform_device nhk8815_eth_device = { - .name = "smc91x", - .resource = nhk8815_eth_resources, - .num_resources = ARRAY_SIZE(nhk8815_eth_resources), -}; - -static int __init nhk8815_eth_init(void) -{ - int gpio_nr = 115; /* hardwired in the board */ - int err; - - err = gpio_request(gpio_nr, "eth_irq"); - if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO); - if (!err) err = gpio_direction_input(gpio_nr); - if (err) - pr_err("Error %i in %s\n", err, __func__); - return err; -} -device_initcall(nhk8815_eth_init); - -static struct platform_device *nhk8815_platform_devices[] __initdata = { - &nhk8815_nand_device, - &nhk8815_onenand_device, - &nhk8815_eth_device, - /* will add more devices */ -}; - -static void __init nomadik_timer_init(void) -{ - u32 src_cr; - - /* Configure timer sources in "system reset controller" ctrl reg */ - src_cr = readl(io_p2v(NOMADIK_SRC_BASE)); - src_cr &= SRC_CR_INIT_MASK; - src_cr |= SRC_CR_INIT_VAL; - writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); - - nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0); -} - -static struct sys_timer nomadik_timer = { - .init = nomadik_timer_init, -}; - -static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = { - { - I2C_BOARD_INFO("stw4811", 0x2d), - }, -}; - -static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = { - { - I2C_BOARD_INFO("camera", 0x10), - }, - { - I2C_BOARD_INFO("stw5095", 0x1a), - }, - { - I2C_BOARD_INFO("lis3lv02dl", 0x1d), - }, -}; - -static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = { - { - I2C_BOARD_INFO("stw4811-usb", 0x2d), - }, -}; - -static unsigned long out_low[] = { PIN_OUTPUT_LOW }; -static unsigned long out_high[] = { PIN_OUTPUT_HIGH }; -static unsigned long in_nopull[] = { PIN_INPUT_NOPULL }; -static unsigned long in_pullup[] = { PIN_INPUT_PULLUP }; - -static struct pinctrl_map __initdata nhk8815_pinmap[] = { - PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"), - PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"), - /* Hog in MMC/SD card mux */ - PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"), - /* MCCLK */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low), - /* MCCMD */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup), - /* MCCMDDIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high), - /* MCDAT3-0 */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup), - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup), - /* MCDAT0DIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high), - /* MCDAT31DIR */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high), - /* MCMSFBCLK */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup), - /* CD input GPIO */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull), - /* CD bias drive */ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low), -}; - -static void __init nhk8815_platform_init(void) -{ - pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap)); - cpu8815_platform_init(); - nhk8815_onenand_init(); - platform_add_devices(nhk8815_platform_devices, - ARRAY_SIZE(nhk8815_platform_devices)); - - amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0); - amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0); - - i2c_register_board_info(0, nhk8815_i2c0_devices, - ARRAY_SIZE(nhk8815_i2c0_devices)); - i2c_register_board_info(1, nhk8815_i2c1_devices, - ARRAY_SIZE(nhk8815_i2c1_devices)); - i2c_register_board_info(2, nhk8815_i2c2_devices, - ARRAY_SIZE(nhk8815_i2c2_devices)); -} - -MACHINE_START(NOMADIK, "NHK8815") - /* Maintainer: ST MicroElectronics */ - .atag_offset = 0x100, - .map_io = cpu8815_map_io, - .init_irq = cpu8815_init_irq, - .handle_irq = vic_handle_irq, - .timer = &nomadik_timer, - .init_machine = nhk8815_platform_init, - .restart = cpu8815_restart, -MACHINE_END diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 1273931..21c1aa5 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -25,138 +25,308 @@ #include <linux/slab.h> #include <linux/irq.h> #include <linux/dma-mapping.h> +#include <linux/irqchip.h> #include <linux/platform_data/clk-nomadik.h> #include <linux/platform_data/pinctrl-nomadik.h> +#include <linux/pinctrl/machine.h> +#include <linux/platform_data/clocksource-nomadik-mtu.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/mtd/fsmc.h> +#include <linux/gpio.h> +#include <linux/amba/mmci.h> -#include <mach/hardware.h> #include <mach/irqs.h> +#include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/hardware/vic.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> -#include "cpu-8815.h" +/* + * These are the only hard-coded address offsets we still have to use. + */ +#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */ +#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */ +#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */ +#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */ +#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */ +#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */ +#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */ +#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */ +#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */ +#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */ +#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */ +#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */ +#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */ +#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */ +#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */ +#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */ +#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */ +#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */ +#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */ +#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */ +#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */ +#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ +#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */ +#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */ +#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */ +#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */ +#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */ +#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */ +#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */ +#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */ +#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */ +#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ +#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ +#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */ +#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */ +#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */ +#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */ +#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */ +#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */ +#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ +#define NOMADIK_UART1_VBASE 0xF01FB000 -/* The 8815 has 4 GPIO blocks, let's register them immediately */ -static resource_size_t __initdata cpu8815_gpio_base[] = { - NOMADIK_GPIO0_BASE, - NOMADIK_GPIO1_BASE, - NOMADIK_GPIO2_BASE, - NOMADIK_GPIO3_BASE, +static unsigned long out_low[] = { PIN_OUTPUT_LOW }; +static unsigned long out_high[] = { PIN_OUTPUT_HIGH }; +static unsigned long in_nopull[] = { PIN_INPUT_NOPULL }; +static unsigned long in_pullup[] = { PIN_INPUT_PULLUP }; + +static struct pinctrl_map __initdata nhk8815_pinmap[] = { + PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"), + PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"), + /* Hog in MMC/SD card mux */ + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"), + /* MCCLK */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low), + /* MCCMD */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup), + /* MCCMDDIR */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high), + /* MCDAT3-0 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup), + /* MCDAT0DIR */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high), + /* MCDAT31DIR */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high), + /* MCMSFBCLK */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup), + /* CD input GPIO */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull), + /* CD bias drive */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low), + /* I2C0 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup), + /* I2C1 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup), + /* I2C2 */ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup), + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup), }; -static struct platform_device * -cpu8815_add_gpio(int id, resource_size_t addr, int irq, - struct nmk_gpio_platform_data *pdata) +/* This is needed for LL-debug/earlyprintk/debug-macro.S */ +static struct map_desc cpu8815_io_desc[] __initdata = { + { + .virtual = NOMADIK_UART1_VBASE, + .pfn = __phys_to_pfn(NOMADIK_UART1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init cpu8815_map_io(void) { - struct resource resources[] = { - { - .start = addr, - .end = addr + 127, - .flags = IORESOURCE_MEM, - }, - { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - } - }; - - return platform_device_register_resndata(NULL, "gpio", id, - resources, ARRAY_SIZE(resources), - pdata, sizeof(*pdata)); + iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc)); } -void cpu8815_add_gpios(resource_size_t *base, int num, int irq, - struct nmk_gpio_platform_data *pdata) +static void cpu8815_restart(char mode, const char *cmd) { - int first = 0; - int i; + void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K); - for (i = 0; i < num; i++, first += 32, irq++) { - pdata->first_gpio = first; - pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); - pdata->num_gpio = 32; + /* FIXME: use egpio when implemented */ - cpu8815_add_gpio(i, base[i], irq, pdata); - } + /* Write anything to Reset status register */ + writel(1, srcbase + 0x18); } -static inline void -cpu8815_add_pinctrl(struct device *parent, const char *name) +/* Initial value for SRC control register: all timers use MXTAL/8 source */ +#define SRC_CR_INIT_MASK 0x00007fff +#define SRC_CR_INIT_VAL 0x2aaa8000 + +static void __init cpu8815_timer_init_of(void) { - struct platform_device_info pdevinfo = { - .parent = parent, - .name = name, - .id = -1, - }; + struct device_node *mtu; + void __iomem *base; + int irq; + u32 src_cr; + + /* We need this to be up now */ + nomadik_clk_init(); + + mtu = of_find_node_by_path("/mtu0"); + if (!mtu) + return; + base = of_iomap(mtu, 0); + if (WARN_ON(!base)) + return; + irq = irq_of_parse_and_map(mtu, 0); - platform_device_register_full(&pdevinfo); + pr_info("Remapped MTU @ %p, irq: %d\n", base, irq); + + /* Configure timer sources in "system reset controller" ctrl reg */ + src_cr = readl(base); + src_cr &= SRC_CR_INIT_MASK; + src_cr |= SRC_CR_INIT_VAL; + writel(src_cr, base); + + nmdk_timer_init(base, irq); } -static int __init cpu8815_init(void) +static struct fsmc_nand_timings cpu8815_nand_timings = { + .thiz = 0, + .thold = 0x10, + .twait = 0x0A, + .tset = 0, +}; + +static struct fsmc_nand_platform_data cpu8815_nand_data = { + .nand_timings = &cpu8815_nand_timings, +}; + +/* + * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects + * to simply request an IRQ passed as a resource. So the GPIO pin needs + * to be requested by this hog and set as input. + */ +static int __init cpu8815_eth_init(void) { - struct nmk_gpio_platform_data pdata = { - /* No custom data yet */ - }; - - cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base), - IRQ_GPIO0, &pdata); - cpu8815_add_pinctrl(NULL, "pinctrl-stn8815"); - amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0); - amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0); + struct device_node *eth; + int gpio, irq, err; + + eth = of_find_node_by_path("/usb-s8815/ethernet-gpio"); + if (!eth) { + pr_info("could not find any ethernet GPIO\n"); + return 0; + } + gpio = of_get_gpio(eth, 0); + err = gpio_request(gpio, "eth_irq"); + if (err) { + pr_info("failed to request ethernet GPIO\n"); + return -ENODEV; + } + err = gpio_direction_input(gpio); + if (err) { + pr_info("failed to set ethernet GPIO as input\n"); + return -ENODEV; + } + irq = gpio_to_irq(gpio); + pr_info("enabled USB-S8815 ethernet GPIO %d, IRQ %d\n", gpio, irq); return 0; } -arch_initcall(cpu8815_init); +device_initcall(cpu8815_eth_init); -/* All SoC devices live in the same area (see hardware.h) */ -static struct map_desc nomadik_io_desc[] __initdata = { - { - .virtual = NOMADIK_IO_VIRTUAL, - .pfn = __phys_to_pfn(NOMADIK_IO_PHYSICAL), - .length = NOMADIK_IO_SIZE, - .type = MT_DEVICE, - } - /* static ram and secured ram may be added later */ +/* + * TODO: + * cannot be set from device tree, convert to a proper DT + * binding. + */ +static struct mmci_platform_data mmcsd_plat_data = { + .ocr_mask = MMC_VDD_29_30, }; -void __init cpu8815_map_io(void) +/* + * This GPIO pin turns on a line that is used to detect card insertion + * on this board. + */ +static int __init cpu8815_mmcsd_init(void) { - iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc)); -} + struct device_node *cdbias; + int gpio, err; -void __init cpu8815_init_irq(void) -{ - /* This modified VIC cell has two register blocks, at 0 and 0x20 */ - vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0); - vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0); - - /* - * Init clocks here so that they are available for system timer - * initialization. - */ - nomadik_clk_init(); + cdbias = of_find_node_by_path("/usb-s8815/mmcsd-gpio"); + if (!cdbias) { + pr_info("could not find MMC/SD card detect bias node\n"); + return 0; + } + gpio = of_get_gpio(cdbias, 0); + if (gpio < 0) { + pr_info("could not obtain MMC/SD card detect bias GPIO\n"); + return 0; + } + err = gpio_request(gpio, "card detect bias"); + if (err) { + pr_info("failed to request card detect bias GPIO %d\n", gpio); + return -ENODEV; + } + err = gpio_direction_output(gpio, 0); + if (err){ + pr_info("failed to set GPIO %d as output, low\n", gpio); + return err; + } + pr_info("enabled USB-S8815 CD bias GPIO %d, low\n", gpio); + return 0; } +device_initcall(cpu8815_mmcsd_init); -/* - * This function is called from the board init ("init_machine"). - */ - void __init cpu8815_platform_init(void) + +/* These are mostly to get the right device names for the clock lookups */ +static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE, + "gpio.0", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE, + "gpio.1", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE, + "gpio.2", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE, + "gpio.3", NULL), + OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0, + "pinctrl-stn8815", NULL), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE, + "uart0", NULL), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE, + "uart1", NULL), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE, + "rng", NULL), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE, + "rtc-pl031", NULL), + OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE, + "fsmc-nand", &cpu8815_nand_data), + OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE, + "mmci", &mmcsd_plat_data), + { /* sentinel */ }, +}; + +static void __init cpu8815_init_of(void) { #ifdef CONFIG_CACHE_L2X0 /* At full speed latency must be >=2, so 0x249 in low bits */ - l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff); + l2x0_of_init(0x00730249, 0xfe000fff); #endif - return; + pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap)); + of_platform_populate(NULL, of_default_bus_match_table, + cpu8815_auxdata_lookup, NULL); } -void cpu8815_restart(char mode, const char *cmd) -{ - void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18); - - /* FIXME: use egpio when implemented */ +static const char * cpu8815_board_compat[] = { + "calaosystems,usb-s8815", + NULL, +}; - /* Write anything to Reset status register */ - writel(1, src_rstsr); -} +DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") + .map_io = cpu8815_map_io, + .init_irq = irqchip_init, + .init_time = cpu8815_timer_init_of, + .init_machine = cpu8815_init_of, + .restart = cpu8815_restart, + .dt_compat = cpu8815_board_compat, +MACHINE_END diff --git a/arch/arm/mach-nomadik/cpu-8815.h b/arch/arm/mach-nomadik/cpu-8815.h deleted file mode 100644 index 71c21e8..0000000 --- a/arch/arm/mach-nomadik/cpu-8815.h +++ /dev/null @@ -1,4 +0,0 @@ -extern void cpu8815_map_io(void); -extern void cpu8815_platform_init(void); -extern void cpu8815_init_irq(void); -extern void cpu8815_restart(char, const char *); diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c deleted file mode 100644 index 0c2f662..0000000 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ /dev/null @@ -1,88 +0,0 @@ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_device.h> -#include <linux/platform_data/pinctrl-nomadik.h> - -/* - * There are two busses in the 8815NHK. - * They could, in theory, be driven by the hardware component, but we - * use bit-bang through GPIO by now, to keep things simple - */ - -/* I2C0 connected to the STw4811 power management chip */ -static struct i2c_gpio_platform_data nhk8815_i2c_data0 = { - /* keep defaults for timeouts; pins are push-pull bidirectional */ - .scl_pin = 62, - .sda_pin = 63, -}; - -/* I2C1 connected to various sensors */ -static struct i2c_gpio_platform_data nhk8815_i2c_data1 = { - /* keep defaults for timeouts; pins are push-pull bidirectional */ - .scl_pin = 53, - .sda_pin = 54, -}; - -/* I2C2 connected to the USB portions of the STw4811 only */ -static struct i2c_gpio_platform_data nhk8815_i2c_data2 = { - /* keep defaults for timeouts; pins are push-pull bidirectional */ - .scl_pin = 73, - .sda_pin = 74, -}; - -static struct platform_device nhk8815_i2c_dev0 = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &nhk8815_i2c_data0, - }, -}; - -static struct platform_device nhk8815_i2c_dev1 = { - .name = "i2c-gpio", - .id = 1, - .dev = { - .platform_data = &nhk8815_i2c_data1, - }, -}; - -static struct platform_device nhk8815_i2c_dev2 = { - .name = "i2c-gpio", - .id = 2, - .dev = { - .platform_data = &nhk8815_i2c_data2, - }, -}; - -static pin_cfg_t cpu8815_pins_i2c[] = { - PIN_CFG_INPUT(62, GPIO, PULLUP), - PIN_CFG_INPUT(63, GPIO, PULLUP), - PIN_CFG_INPUT(53, GPIO, PULLUP), - PIN_CFG_INPUT(54, GPIO, PULLUP), - PIN_CFG_INPUT(73, GPIO, PULLUP), - PIN_CFG_INPUT(74, GPIO, PULLUP), -}; - -static int __init nhk8815_i2c_init(void) -{ - nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c)); - platform_device_register(&nhk8815_i2c_dev0); - platform_device_register(&nhk8815_i2c_dev1); - platform_device_register(&nhk8815_i2c_dev2); - - return 0; -} - -static void __exit nhk8815_i2c_exit(void) -{ - platform_device_unregister(&nhk8815_i2c_dev0); - platform_device_unregister(&nhk8815_i2c_dev1); - platform_device_unregister(&nhk8815_i2c_dev2); - return; -} - -module_init(nhk8815_i2c_init); -module_exit(nhk8815_i2c_exit); diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h deleted file mode 100644 index 02035e4..0000000 --- a/arch/arm/mach-nomadik/include/mach/hardware.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * This file contains the hardware definitions of the Nomadik. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * YOU should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */ -#define NOMADIK_IO_VIRTUAL 0xF0000000 /* VA of IO */ -#define NOMADIK_IO_PHYSICAL 0x10000000 /* PA of IO */ -#define NOMADIK_IO_SIZE 0x00300000 /* 3MB for all regs */ - -/* used in C code, so cast to proper type */ -#define io_p2v(x) ((void __iomem *)(x) \ - - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL) -#define io_v2p(x) ((unsigned long)(x) \ - - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL) - -/* used in asm code, so no casts */ -#define IO_ADDRESS(x) IOMEM((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL) - -/* - * Base address defination for Nomadik Onchip Logic Block - */ -#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */ -#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */ -#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */ -#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */ -#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */ -#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */ -#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */ -#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */ -#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */ -#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */ -#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */ -#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */ -#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */ -#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */ -#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */ -#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */ -#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */ -#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */ -#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */ -#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */ -#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */ -#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ -#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */ -#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */ -#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */ -#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */ -#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */ -#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */ -#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */ -#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */ -#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */ -#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ -#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ -#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */ -#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */ -#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */ -#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */ -#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */ -#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */ -#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ - -/* Other ranges, not for p2v/v2p */ -#define NOMADIK_BACKUP_RAM 0x80010000 -#define NOMADIK_EBROM 0x80000000 /* Embedded boot ROM */ -#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000 /* HAMACV Data Memory Start */ -#define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF /* HAMACV Data Memory End */ -#define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */ - -#define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE) -#define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE) -#define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE) - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h index 215f8cd..90ac965 100644 --- a/arch/arm/mach-nomadik/include/mach/irqs.h +++ b/arch/arm/mach-nomadik/include/mach/irqs.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H -#include <mach/hardware.h> - #define IRQ_VIC_START 32 /* first VIC interrupt is 1 */ /* diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h index 7d4687e..106fccc 100644 --- a/arch/arm/mach-nomadik/include/mach/uncompress.h +++ b/arch/arm/mach-nomadik/include/mach/uncompress.h @@ -21,7 +21,6 @@ #include <asm/setup.h> #include <asm/io.h> -#include <mach/hardware.h> /* we need the constants in amba/serial.h, but it refers to amba_device */ struct amba_device; @@ -58,6 +57,4 @@ static inline void arch_decomp_setup(void) { } -#define arch_decomp_wdog() /* nothing to do here */ - #endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 2e98a3a..2aab761 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -628,6 +628,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .init_late = ams_delta_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 560a7dc..702d580 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -364,6 +364,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 608e7d2..e1d9171 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -84,6 +84,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 2274bd6..0dac3d2 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -461,6 +461,6 @@ MACHINE_START(OMAP_H2, "TI-H2") .init_irq = omap1_init_irq, .init_machine = h2_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 1051935..816ecd1 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -454,6 +454,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .init_irq = omap1_init_irq, .init_machine = h3_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 356f816..35a2379 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -603,6 +603,6 @@ MACHINE_START(HERALD, "HTC Herald") .init_irq = omap1_init_irq, .init_machine = htcherald_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index f8033fa..bd5f02e 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -458,6 +458,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .init_irq = omap1_init_irq, .init_machine = innovator_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 24d2f2d..62a15e2 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/irq.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> @@ -23,6 +24,8 @@ #include <linux/platform_data/keypad-omap.h> #include <linux/platform_data/lcd-mipid.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/i2c-cbus-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -212,6 +215,45 @@ static inline void nokia770_mmc_init(void) } #endif +#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE) +static struct i2c_cbus_platform_data nokia770_cbus_data = { + .clk_gpio = OMAP_MPUIO(9), + .dat_gpio = OMAP_MPUIO(10), + .sel_gpio = OMAP_MPUIO(11), +}; + +static struct platform_device nokia770_cbus_device = { + .name = "i2c-cbus-gpio", + .id = 2, + .dev = { + .platform_data = &nokia770_cbus_data, + }, +}; + +static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { + { + I2C_BOARD_INFO("retu-mfd", 0x01), + }, +}; + +static void __init nokia770_cbus_init(void) +{ + const int retu_irq_gpio = 62; + + if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ")) + return; + irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING); + nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio); + i2c_register_board_info(2, nokia770_i2c_board_info_2, + ARRAY_SIZE(nokia770_i2c_board_info_2)); + platform_device_register(&nokia770_cbus_device); +} +#else /* CONFIG_I2C_CBUS_GPIO */ +static void __init nokia770_cbus_init(void) +{ +} +#endif /* CONFIG_I2C_CBUS_GPIO */ + static void __init omap_nokia770_init(void) { /* On Nokia 770, the SleepX signal is masked with an @@ -233,6 +275,7 @@ static void __init omap_nokia770_init(void) mipid_dev_init(); omap1_usb_init(&nokia770_usb_config); nokia770_mmc_init(); + nokia770_cbus_init(); } MACHINE_START(NOKIA770, "Nokia 770") @@ -242,6 +285,6 @@ MACHINE_START(NOKIA770, "Nokia 770") .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 872ea47..a7ce692 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -609,6 +609,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .init_irq = omap1_init_irq, .init_machine = osk_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index c33dceb..845a1a7 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -268,6 +268,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 2948b0e..65a4a3e 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -314,6 +314,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 7a05895..01c9700 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -330,6 +330,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 27f8d12..8b2f712 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -326,6 +326,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 20ed52a..9732a98 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -407,6 +407,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index abf705f..6c116e1 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -289,6 +289,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .init_late = omap1_init_late, - .timer = &omap1_timer, + .init_time = omap1_timer_init, .restart = voiceblue_restart, MACHINE_END diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index b53e085..fb18831 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -75,7 +75,7 @@ extern void __init omap_check_revision(void); extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl); -extern struct sys_timer omap1_timer; +extern void omap1_timer_init(void); #ifdef CONFIG_OMAP_32K_TIMER extern int omap_32k_timer_init(void); #else diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index e190611..1a4e887 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -24,7 +24,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/io.h> - +#include <linux/dma-mapping.h> #include <linux/omap-dma.h> #include <mach/tc.h> @@ -270,11 +270,17 @@ static u32 configure_dma_errata(void) return errata; } +static const struct platform_device_info omap_dma_dev_info = { + .name = "omap-dma-engine", + .id = -1, + .dma_mask = DMA_BIT_MASK(32), +}; + static int __init omap1_system_dma_init(void) { struct omap_system_dma_plat_info *p; struct omap_dma_dev_attr *d; - struct platform_device *pdev; + struct platform_device *pdev, *dma_pdev; int ret; pdev = platform_device_alloc("omap_dma_system", 0); @@ -380,8 +386,16 @@ static int __init omap1_system_dma_init(void) dma_common_ch_start = CPC; dma_common_ch_end = COLOR; + dma_pdev = platform_device_register_full(&omap_dma_dev_info); + if (IS_ERR(dma_pdev)) { + ret = PTR_ERR(dma_pdev); + goto exit_release_pdev; + } + return ret; +exit_release_pdev: + platform_device_del(pdev); exit_release_chan: kfree(d->chan); exit_release_d: diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index faca808..7f5761c 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -91,3 +91,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, return platform_device_register(pdev); } + +static int __init omap_i2c_cmdline(void) +{ + return omap_register_i2c_bus_cmdline(); +} +subsys_initcall(omap_i2c_cmdline); diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h index ad6fbe7..4869633 100644 --- a/arch/arm/mach-omap1/include/mach/uncompress.h +++ b/arch/arm/mach-omap1/include/mach/uncompress.h @@ -115,8 +115,3 @@ static inline void arch_decomp_setup(void) DEBUG_LL_OMAP1(3, sx1); } while (0); } - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 4d4816f..726ec23 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -145,7 +145,6 @@ static void omap_mpu_set_mode(enum clock_event_mode mode, static struct clock_event_device clockevent_mpu_timer1 = { .name = "mpu_timer1", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .set_next_event = omap_mpu_set_next_event, .set_mode = omap_mpu_set_mode, }; @@ -170,15 +169,9 @@ static __init void omap_init_mpu_timer(unsigned long rate) setup_irq(INT_TIMER1, &omap_mpu_timer1_irq); omap_mpu_timer_start(0, (rate / HZ) - 1, 1); - clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC, - clockevent_mpu_timer1.shift); - clockevent_mpu_timer1.max_delta_ns = - clockevent_delta2ns(-1, &clockevent_mpu_timer1); - clockevent_mpu_timer1.min_delta_ns = - clockevent_delta2ns(1, &clockevent_mpu_timer1); - clockevent_mpu_timer1.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_mpu_timer1); + clockevents_config_and_register(&clockevent_mpu_timer1, rate, + 1, -1); } @@ -236,12 +229,8 @@ static inline void omap_mpu_timer_init(void) * Timer initialization * --------------------------------------------------------------------------- */ -static void __init omap1_timer_init(void) +void __init omap1_timer_init(void) { if (omap_32k_timer_init() != 0) omap_mpu_timer_init(); } - -struct sys_timer omap1_timer = { - .init = omap1_timer_init, -}; diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 41152fa..0b74246 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -140,7 +140,6 @@ static void omap_32k_timer_set_mode(enum clock_event_mode mode, static struct clock_event_device clockevent_32k_timer = { .name = "32k-timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .set_next_event = omap_32k_timer_set_next_event, .set_mode = omap_32k_timer_set_mode, }; @@ -165,16 +164,9 @@ static __init void omap_init_32k_timer(void) { setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); - clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC, - NSEC_PER_SEC, - clockevent_32k_timer.shift); - clockevent_32k_timer.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &clockevent_32k_timer); - clockevent_32k_timer.min_delta_ns = - clockevent_delta2ns(1, &clockevent_32k_timer); - clockevent_32k_timer.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_32k_timer); + clockevents_config_and_register(&clockevent_32k_timer, + OMAP_32K_TICKS_PER_SEC, 1, 0xfffffffe); } /* diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 41b581f..49ac3df 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -1,3 +1,26 @@ +config ARCH_OMAP + bool + +config ARCH_OMAP2PLUS + bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7) + select ARCH_HAS_CPUFREQ + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_OMAP + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select HAVE_CLK + select OMAP_DM_TIMER + select PINCTRL + select PROC_DEVICETREE if PROC_FS + select SPARSE_IRQ + select USE_OF + help + Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 + + if ARCH_OMAP2PLUS menu "TI OMAP2/3/4 Specific Features" @@ -76,12 +99,12 @@ config ARCH_OMAP4 config SOC_OMAP5 bool "TI OMAP5" - select ARM_ARCH_TIMER select ARM_CPU_SUSPEND if PM select ARM_GIC select CPU_V7 select HAVE_SMP select COMMON_CLK + select HAVE_ARM_ARCH_TIMER comment "OMAP Core Type" depends on ARCH_OMAP2 @@ -165,12 +188,6 @@ config MACH_OMAP_H4 select OMAP_DEBUG_DEVICES select OMAP_PACKAGE_ZAF -config MACH_OMAP_APOLLON - bool "OMAP 2420 Apollon board" - depends on SOC_OMAP2420 - default y - select OMAP_PACKAGE_ZAC - config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" depends on SOC_OMAP2430 @@ -397,7 +414,7 @@ config OMAP3_SDRC_AC_TIMING config OMAP4_ERRATA_I688 bool "OMAP4 errata: Async Bridge Corruption" - depends on ARCH_OMAP4 + depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 947cafe..ff528df 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -2,6 +2,9 @@ # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ + -I$(srctree)/arch/arm/plat-omap/include + # Common support obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ @@ -220,7 +223,6 @@ endif obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o -obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index af11dcd..a00d391 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -63,7 +63,7 @@ static int __init omap_davinci_emac_dev_init(struct omap_hwmod *oh, struct platform_device *pdev; pdev = omap_device_build(oh->class->name, 0, oh, pdata, pdata_len, - NULL, 0, false); + false); if (IS_ERR(pdev)) { WARN(1, "Can't build omap_device for %s:%s.\n", oh->class->name, oh->name); diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 4815ea6..a3e0aaa 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -27,6 +27,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/usb/phy.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -263,6 +264,7 @@ static void __init omap_2430sdp_init(void) omap_hsmmc_init(mmc); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); board_smc91x_init(); @@ -284,6 +286,6 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .handle_irq = omap2_intc_handle_irq, .init_machine = omap_2430sdp_init, .init_late = omap2430_init_late, - .timer = &omap2_timer, + .init_time = omap2_sync32k_timer_init, .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index bb73afc..ce812de 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -25,6 +25,8 @@ #include <linux/gpio.h> #include <linux/mmc/host.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include <linux/platform_data/omap-twl4030.h> +#include <linux/usb/phy.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -209,6 +211,19 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct omap_tw4030_pdata omap_twl4030_audio_data = { + .voice_connected = true, + .custom_routing = true, + + .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, + .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, + + .has_mainmic = true, + .has_submic = true, + .has_hsmic = true, + .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, +}; + static int sdp3430_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -225,6 +240,9 @@ static int sdp3430_twl_gpio_setup(struct device *dev, /* gpio + 15 is "sub_lcd_nRST" (output) */ gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST"); + omap_twl4030_audio_data.jack_detect = gpio + 2; + omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data); + return 0; } @@ -382,6 +400,9 @@ static int __init omap3430_i2c_init(void) sdp3430_twldata.vpll2->constraints.apply_uV = true; sdp3430_twldata.vpll2->constraints.name = "VDVI"; + sdp3430_twldata.audio->codec->hs_extmute = 1; + sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL; + omap3_pmic_init("twl4030", &sdp3430_twldata); /* i2c2 on camera connector (for sensor control) and optional isp1301 */ @@ -424,7 +445,7 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, @@ -579,6 +600,7 @@ static void __init omap_3430sdp_init(void) omap_ads7846_init(1, gpio_pendown, 310, NULL); omap_serial_init(); omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); @@ -597,6 +619,6 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_3430sdp_init, .init_late = omap3430_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 050aaa7..67447bd 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -53,7 +53,7 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, @@ -211,6 +211,6 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_sdp_init, .init_late = omap3630_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 1cc6696..35f3ad0 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -24,12 +24,15 @@ #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/pwm.h> #include <linux/leds.h> #include <linux/leds_pwm.h> +#include <linux/pwm_backlight.h> +#include <linux/irqchip/arm-gic.h> #include <linux/platform_data/omap4-keypad.h> #include <linux/usb/musb.h> +#include <linux/usb/phy.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -256,10 +259,20 @@ static struct gpio_led_platform_data sdp4430_led_data = { .num_leds = ARRAY_SIZE(sdp4430_gpio_leds), }; +static struct pwm_lookup sdp4430_pwm_lookup[] = { + PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "omap4::keypad"), + PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", NULL), + PWM_LOOKUP("twl-pwmled", 0, "leds_pwm", "omap4:green:chrg"), +}; + static struct led_pwm sdp4430_pwm_leds[] = { { + .name = "omap4::keypad", + .max_brightness = 127, + .pwm_period_ns = 7812500, + }, + { .name = "omap4:green:chrg", - .pwm_id = 1, .max_brightness = 255, .pwm_period_ns = 7812500, }, @@ -278,6 +291,20 @@ static struct platform_device sdp4430_leds_pwm = { }, }; +static struct platform_pwm_backlight_data sdp4430_backlight_data = { + .max_brightness = 127, + .dft_brightness = 127, + .pwm_period_ns = 7812500, +}; + +static struct platform_device sdp4430_backlight_pwm = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .platform_data = &sdp4430_backlight_data, + }, +}; + static int omap_prox_activate(struct device *dev) { gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1); @@ -412,6 +439,7 @@ static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, + &sdp4430_backlight_pwm, &sdp4430_vbat, &sdp4430_dmic_codec, &sdp4430_abe_audio, @@ -696,6 +724,7 @@ static void __init omap_4430sdp_init(void) omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); + usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); @@ -707,6 +736,7 @@ static void __init omap_4430sdp_init(void) ARRAY_SIZE(sdp4430_spi_board_info)); } + pwm_add_table(sdp4430_pwm_lookup, ARRAY_SIZE(sdp4430_pwm_lookup)); status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); @@ -722,9 +752,8 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, - .handle_irq = gic_handle_irq, .init_machine = omap_4430sdp_init, .init_late = omap4430_init_late, - .timer = &omap4_timer, + .init_time = omap4_local_timer_init, .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 51b96a1..7d3358b 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -20,12 +20,18 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/mfd/tps65910.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" +#include "common-board-devices.h" +#include "board-flash.h" #include "am35xx-emac.h" #include "mux.h" @@ -36,11 +42,12 @@ #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif -static struct usbhs_omap_board_data usbhs_bdata __initdata = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -51,6 +58,54 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +static struct mtd_partition crane_nand_partitions[] = { + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, + .size = 14 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, + .size = 2 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = 40 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct tps65910_board tps65910_pdata = { + .irq = 7 + OMAP_INTC_START, + .en_ck32k_xtal = true, +}; + +static struct i2c_board_info __initdata tps65910_board_info[] = { + { + I2C_BOARD_INFO("tps65910", 0x2d), + .platform_data = &tps65910_pdata, + }, +}; + +static void __init am3517_crane_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, tps65910_board_info, + ARRAY_SIZE(tps65910_board_info)); +} + static void __init am3517_crane_init(void) { int ret; @@ -58,6 +113,10 @@ static void __init am3517_crane_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); omap_sdrc_init(NULL, NULL); + board_nand_init(crane_nand_partitions, + ARRAY_SIZE(crane_nand_partitions), 0, + NAND_BUSWIDTH_16, NULL); + am3517_crane_i2c_init(); /* Configure GPIO for EHCI port */ if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) { @@ -92,6 +151,6 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .handle_irq = omap3_intc_handle_irq, .init_machine = am3517_crane_init, .init_late = am35xx_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index f81a303..9fb8590 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -274,7 +274,7 @@ static __init void am3517_evm_mcbsp1_init(void) omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); } -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) @@ -393,6 +393,6 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .handle_irq = omap3_intc_handle_irq, .init_machine = am3517_evm_init, .init_late = am35xx_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c deleted file mode 100644 index 5d0a61f..0000000 --- a/arch/arm/mach-omap2/board-apollon.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-apollon.c - * - * Copyright (C) 2005,2006 Samsung Electronics - * Author: Kyungmin Park <kyungmin.park@samsung.com> - * - * Modified from mach-omap/omap2/board-h4.c - * - * Code for apollon OMAP2 board. Should work on many OMAP2 systems where - * the bootloader passes the board-specific data to the kernel. - * Do not put any board specific code to this file; create a new machine - * type if you need custom low-level initializations. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/onenand.h> -#include <linux/delay.h> -#include <linux/leds.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/smc91x.h> -#include <linux/gpio.h> -#include <linux/platform_data/leds-omap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -#include "common.h" -#include "gpmc.h" - -#include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> - -#include "mux.h" -#include "control.h" - -/* LED & Switch macros */ -#define LED0_GPIO13 13 -#define LED1_GPIO14 14 -#define LED2_GPIO15 15 -#define SW_ENTER_GPIO16 16 -#define SW_UP_GPIO17 17 -#define SW_DOWN_GPIO58 58 - -#define APOLLON_FLASH_CS 0 -#define APOLLON_ETH_CS 1 -#define APOLLON_ETHR_GPIO_IRQ 74 - -static struct mtd_partition apollon_partitions[] = { - { - .name = "X-Loader + U-Boot", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = SZ_16M, - }, - { - .name = "filesystem00", - .offset = MTDPART_OFS_APPEND, - .size = SZ_32M, - }, - { - .name = "filesystem01", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct onenand_platform_data apollon_flash_data = { - .parts = apollon_partitions, - .nr_parts = ARRAY_SIZE(apollon_partitions), -}; - -static struct resource apollon_flash_resource[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device apollon_onenand_device = { - .name = "onenand-flash", - .id = -1, - .dev = { - .platform_data = &apollon_flash_data, - }, - .num_resources = ARRAY_SIZE(apollon_flash_resource), - .resource = apollon_flash_resource, -}; - -static void __init apollon_flash_init(void) -{ - unsigned long base; - - if (gpmc_cs_request(APOLLON_FLASH_CS, SZ_128K, &base) < 0) { - printk(KERN_ERR "Cannot request OneNAND GPMC CS\n"); - return; - } - apollon_flash_resource[0].start = base; - apollon_flash_resource[0].end = base + SZ_128K - 1; -} - -static struct smc91x_platdata appolon_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource apollon_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device apollon_smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &appolon_smc91x_info, - }, - .num_resources = ARRAY_SIZE(apollon_smc91x_resources), - .resource = apollon_smc91x_resources, -}; - -static struct omap_led_config apollon_led_config[] = { - { - .cdev = { - .name = "apollon:led0", - }, - .gpio = LED0_GPIO13, - }, - { - .cdev = { - .name = "apollon:led1", - }, - .gpio = LED1_GPIO14, - }, - { - .cdev = { - .name = "apollon:led2", - }, - .gpio = LED2_GPIO15, - }, -}; - -static struct omap_led_platform_data apollon_led_data = { - .nr_leds = ARRAY_SIZE(apollon_led_config), - .leds = apollon_led_config, -}; - -static struct platform_device apollon_led_device = { - .name = "omap-led", - .id = -1, - .dev = { - .platform_data = &apollon_led_data, - }, -}; - -static struct platform_device *apollon_devices[] __initdata = { - &apollon_onenand_device, - &apollon_smc91x_device, - &apollon_led_device, -}; - -static inline void __init apollon_init_smc91x(void) -{ - unsigned long base; - - unsigned int rate; - struct clk *gpmc_fck; - int eth_cs; - int err; - - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } - - clk_prepare_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - - eth_cs = APOLLON_ETH_CS; - - /* Make sure CS1 timings are correct */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else {/* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } - - if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) { - printk(KERN_ERR "Failed to request GPMC CS for smc91x\n"); - goto out; - } - apollon_smc91x_resources[0].start = base + 0x300; - apollon_smc91x_resources[0].end = base + 0x30f; - udelay(100); - - omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0); - err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq"); - if (err) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - APOLLON_ETHR_GPIO_IRQ); - gpmc_cs_free(APOLLON_ETH_CS); - } -out: - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); -} - -static struct panel_generic_dpi_data apollon_panel_data = { - .name = "apollon", -}; - -static struct omap_dss_device apollon_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 18, - .data = &apollon_panel_data, -}; - -static struct omap_dss_device *apollon_dss_devices[] = { - &apollon_lcd_device, -}; - -static struct omap_dss_board_info apollon_dss_data = { - .num_devices = ARRAY_SIZE(apollon_dss_devices), - .devices = apollon_dss_devices, - .default_device = &apollon_lcd_device, -}; - -static struct gpio apollon_gpio_leds[] __initdata = { - { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */ - { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */ - { LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */ -}; - -static void __init apollon_led_init(void) -{ - omap_mux_init_signal("vlynq_clk.gpio_13", 0); - omap_mux_init_signal("vlynq_rx1.gpio_14", 0); - omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - - gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init omap_apollon_init(void) -{ - u32 v; - - omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); - - apollon_init_smc91x(); - apollon_led_init(); - apollon_flash_init(); - - /* REVISIT: where's the correct place */ - omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP); - - /* LCD PWR_EN */ - omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); - - /* Use Internal loop-back in MMC/SDIO Module Input Clock selection */ - v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - v |= (1 << 24); - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - - /* - * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. - */ - apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ); - apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ); - platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices)); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - omap_display_init(&apollon_dss_data); -} - -MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") - /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap242x_map_io, - .init_early = omap2420_init_early, - .init_irq = omap2_init_irq, - .handle_irq = omap2_intc_handle_irq, - .init_machine = omap_apollon_init, - .init_late = omap2420_init_late, - .timer = &omap2_timer, - .restart = omap2xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index b3102c2..af2bb21 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -30,6 +30,7 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/mmc/host.h> +#include <linux/usb/phy.h> #include <linux/spi/spi.h> #include <linux/spi/tdo24m.h> @@ -418,7 +419,7 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct usbhs_omap_board_data usbhs_bdata __initdata = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -722,8 +723,9 @@ static void __init cm_t3x_common_init(void) cm_t35_init_ethernet(); cm_t35_init_led(); cm_t35_init_display(); - omap_twl4030_audio_init("cm-t3x"); + omap_twl4030_audio_init("cm-t3x", NULL); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); cm_t35_init_usbh(); cm_t35_init_camera(); @@ -751,7 +753,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t35_init, .init_late = omap35xx_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END @@ -764,6 +766,6 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3730_init, .init_late = omap3630_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index ebbc2ad..a66da80 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -32,6 +32,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mmc/host.h> #include <linux/can/platform/ti_hecc.h> #include <asm/mach-types.h> @@ -46,6 +47,7 @@ #include "mux.h" #include "control.h" +#include "hsmmc.h" #include "common-board-devices.h" #include "am35xx-emac.h" #include "gpmc-nand.h" @@ -121,6 +123,26 @@ static void cm_t3517_init_hecc(void) static inline void cm_t3517_init_hecc(void) {} #endif +#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +static struct omap2_hsmmc_info cm_t3517_mmc[] = { + { + .mmc = 1, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = 144, + .gpio_wp = 59, + }, + { + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; +#else +#define cm_t3517_mmc NULL +#endif + #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) #define RTC_IO_GPIO (153) #define RTC_WR_GPIO (154) @@ -166,7 +188,7 @@ static inline void cm_t3517_init_rtc(void) {} #define HSUSB2_RESET_GPIO (147) #define USB_HUB_RESET_GPIO (152) -static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = { +static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -271,6 +293,10 @@ static struct omap_board_mux board_mux[] __initdata = { /* CM-T3517 USB HUB nRESET */ OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* CD - GPIO144 and WP - GPIO59 for MMC1 - SB-T35 */ + OMAP3_MUX(UART2_CTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(GPMC_CLK, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -286,6 +312,7 @@ static void __init cm_t3517_init(void) cm_t3517_init_usbh(); cm_t3517_init_hecc(); am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); + omap_hsmmc_init(cm_t3517_mmc); } MACHINE_START(CM_T3517, "Compulab CM-T3517") @@ -297,6 +324,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, - .timer = &omap3_gp_timer, + .init_time = omap3_gp_gptimer_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 12865af..53056c3 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -29,6 +29,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/mmc/host.h> +#include <linux/usb/phy.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -435,7 +436,7 @@ static struct platform_device *devkit8000_devices[] __initdata = { &omap_dm9000_dev, }; -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -622,12 +623,13 @@ static void __init devkit8000_init(void) omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); board_nand_init(devkit8000_nand_partitions, ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle"); + omap_twl4030_audio_init("omap3beagle", NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); @@ -643,6 +645,6 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .handle_irq = omap3_intc_handle_irq, .init_machine = devkit8000_init, .init_late = omap35xx_init_late, - .timer = &omap3_secure_timer, + .init_time = omap3_secure_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 53cb380b..2590463 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -16,7 +16,6 @@ #include <linux/of_platform.h> #include <linux/irqdomain.h> -#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include "common.h" @@ -65,7 +64,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, - .timer = &omap2_timer, + .init_time = omap2_sync32k_timer_init, .dt_compat = omap242x_boards_compat, .restart = omap2xxx_restart, MACHINE_END @@ -84,7 +83,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, - .timer = &omap2_timer, + .init_time = omap2_sync32k_timer_init, .dt_compat = omap243x_boards_compat, .restart = omap2xxx_restart, MACHINE_END @@ -103,7 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -120,7 +119,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, - .timer = &omap3_secure_timer, + .init_time = omap3_secure_sync32k_timer_init, .dt_compat = omap3_gp_boards_compat, .restart = omap3xxx_restart, MACHINE_END @@ -139,7 +138,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, - .timer = &omap3_am33xx_timer, + .init_time = omap3_am33xx_gptimer_timer_init, .dt_compat = am33xx_boards_compat, MACHINE_END #endif @@ -156,10 +155,9 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = omap_gic_of_init, - .handle_irq = gic_handle_irq, .init_machine = omap_generic_init, .init_late = omap4430_init_late, - .timer = &omap4_timer, + .init_time = omap4_local_timer_init, .dt_compat = omap4_boards_compat, .restart = omap44xx_restart, MACHINE_END @@ -177,9 +175,8 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") .map_io = omap5_map_io, .init_early = omap5_init_early, .init_irq = omap_gic_of_init, - .handle_irq = gic_handle_irq, .init_machine = omap_generic_init, - .timer = &omap5_timer, + .init_time = omap5_realtime_timer_init, .dt_compat = omap5_boards_compat, .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 3be1311..812c829 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -342,6 +342,6 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .handle_irq = omap2_intc_handle_irq, .init_machine = omap_h4_init, .init_late = omap2420_init_late, - .timer = &omap2_timer, + .init_time = omap2_sync32k_timer_init, .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 0f24cb8..bf92678 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -18,6 +18,7 @@ #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/input.h> +#include <linux/usb/phy.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -300,20 +301,20 @@ static struct omap2_hsmmc_info mmc[] = { static struct gpio_led igep_gpio_leds[] = { [0] = { - .name = "gpio-led:red:d0", - .default_trigger = "default-off" + .name = "omap3:red:user0", + .default_state = 0, }, [1] = { - .name = "gpio-led:green:d0", - .default_trigger = "default-off", + .name = "omap3:green:boot", + .default_state = 1, }, [2] = { - .name = "gpio-led:red:d1", - .default_trigger = "default-off", + .name = "omap3:red:user1", + .default_state = 0, }, [3] = { - .name = "gpio-led:green:d1", - .default_trigger = "heartbeat", + .name = "omap3:green:user1", + .default_state = 0, .gpio = -EINVAL, /* gets replaced */ .active_low = 1, }, @@ -526,7 +527,7 @@ static void __init igep_i2c_init(void) omap3_pmic_init("twl4030", &igep_twldata); } -static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -537,7 +538,7 @@ static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL, }; -static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -625,11 +626,12 @@ static void __init igep_init(void) omap_serial_init(); omap_sdrc_init(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); igep_flash_init(); igep_leds_init(); - omap_twl4030_audio_init("igep2"); + omap_twl4030_audio_init("igep2", NULL); /* * WLAN-BT combo module from MuRata which has a Marvell WLAN @@ -655,7 +657,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .handle_irq = omap3_intc_handle_irq, .init_machine = igep_init, .init_late = omap35xx_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END @@ -668,6 +670,6 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .handle_irq = omap3_intc_handle_irq, .init_machine = igep_init, .init_late = omap35xx_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 0869f4f..b12fe96 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -28,6 +28,7 @@ #include <linux/io.h> #include <linux/smsc911x.h> #include <linux/mmc/host.h> +#include <linux/usb/phy.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <asm/mach-types.h> @@ -418,6 +419,7 @@ static void __init omap_ldp_init(void) omap_ads7846_init(1, 54, 310, NULL); omap_serial_init(); omap_sdrc_init(NULL, NULL); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0, nand_default_timings); @@ -435,6 +437,6 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_ldp_init, .init_late = omap3430_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 0abb30f..f6eeb87 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -731,7 +731,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .handle_irq = omap2_intc_handle_irq, .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, - .timer = &omap2_timer, + .init_time = omap2_sync32k_timer_init, .restart = omap2xxx_restart, MACHINE_END @@ -744,7 +744,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .handle_irq = omap2_intc_handle_irq, .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, - .timer = &omap2_timer, + .init_time = omap2_sync32k_timer_init, .restart = omap2xxx_restart, MACHINE_END @@ -757,6 +757,6 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .handle_irq = omap2_intc_handle_irq, .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, - .timer = &omap2_timer, + .init_time = omap2_sync32k_timer_init, .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 22c483d..c3558f9 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -20,6 +20,8 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/leds.h> +#include <linux/pwm.h> +#include <linux/leds_pwm.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/gpio_keys.h> @@ -30,6 +32,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/mmc/host.h> +#include <linux/usb/phy.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -55,6 +58,32 @@ #define NAND_CS 0 +static struct pwm_lookup pwm_lookup[] = { + /* LEDB -> PMU_STAT */ + PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat"), +}; + +static struct led_pwm pwm_leds[] = { + { + .name = "beagleboard::pmu_stat", + .max_brightness = 127, + .pwm_period_ns = 7812500, + }, +}; + +static struct led_pwm_platform_data pwm_data = { + .num_leds = ARRAY_SIZE(pwm_leds), + .leds = pwm_leds, +}; + +static struct platform_device leds_pwm = { + .name = "leds_pwm", + .id = -1, + .dev = { + .platform_data = &pwm_data, + }, +}; + /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -292,9 +321,6 @@ static int beagle_twl_gpio_setup(struct device *dev, gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - return 0; } @@ -376,11 +402,6 @@ static struct gpio_led gpio_leds[] = { .default_trigger = "mmc0", .gpio = 149, }, - { - .name = "beagleboard::pmu_stat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, }; static struct gpio_led_platform_data gpio_led_info = { @@ -428,9 +449,10 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { &leds_gpio, &keys_gpio, &madc_hwmon, + &leds_pwm, }; -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, @@ -494,7 +516,7 @@ static int __init beagle_opp_init(void) } return 0; } -device_initcall(beagle_opp_init); +omap_device_initcall(beagle_opp_init); static void __init omap3_beagle_init(void) { @@ -519,12 +541,13 @@ static void __init omap3_beagle_init(void) omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); board_nand_init(omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle"); + omap_twl4030_audio_init("omap3beagle", NULL); /* Ensure msecure is mux'd to be able to set the RTC. */ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); @@ -532,6 +555,8 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); + + pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); } MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") @@ -544,6 +569,6 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_beagle_init, .init_late = omap3_init_late, - .timer = &omap3_secure_timer, + .init_time = omap3_secure_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3985f35..48789e0 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -41,6 +41,7 @@ #include <linux/regulator/machine.h> #include <linux/mmc/host.h> #include <linux/export.h> +#include <linux/usb/phy.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -309,7 +310,7 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_wp = 63, .deferred = true, }, -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA { .name = "wl1271", .mmc = 2, @@ -450,7 +451,7 @@ static struct regulator_init_data omap3evm_vio = { .consumer_supplies = omap3evm_vio_supply, }; -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA #define OMAP3EVM_WLAN_PMENA_GPIO (150) #define OMAP3EVM_WLAN_IRQ_GPIO (149) @@ -538,7 +539,7 @@ static int __init omap3_evm_i2c_init(void) return 0; } -static struct usbhs_omap_board_data usbhs_bdata __initdata = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, @@ -563,7 +564,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = { OMAP_PIN_OFF_NONE), OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), @@ -601,7 +602,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = { OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), @@ -637,7 +638,7 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { static void __init omap3_evm_wl12xx_init(void) { -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA int ret; /* WL12xx WLAN Init */ @@ -734,6 +735,7 @@ static void __init omap3_evm_init(void) omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); usbhs_bdata.reset_gpio_port[1] = 135; } + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); board_nand_init(omap3evm_nand_partitions, @@ -744,7 +746,7 @@ static void __init omap3_evm_init(void) omap3evm_init_smsc911x(); omap3_evm_display_init(); omap3_evm_wl12xx_init(); - omap_twl4030_audio_init("omap3evm"); + omap_twl4030_audio_init("omap3evm", NULL); } MACHINE_START(OMAP3EVM, "OMAP3 EVM") @@ -757,6 +759,6 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_evm_init, .init_late = omap35xx_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 2a065ba..bab51e6 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -29,6 +29,7 @@ #include <linux/i2c/twl.h> #include <linux/mmc/host.h> +#include <linux/usb/phy.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -215,6 +216,7 @@ static void __init omap3logic_init(void) board_mmc_init(); board_smsc911x_init(); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); /* Ensure SDRC pins are mux'd for self-refresh */ @@ -231,7 +233,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3logic_init, .init_late = omap35xx_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END @@ -244,6 +246,6 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3logic_init, .init_late = omap35xx_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index a53a668..2bba362 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -35,6 +35,7 @@ #include <linux/mmc/host.h> #include <linux/mmc/card.h> #include <linux/regulator/fixed.h> +#include <linux/usb/phy.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <asm/mach-types.h> @@ -567,7 +568,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_backlight, }; -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, @@ -601,6 +602,7 @@ static void __init omap3pandora_init(void) ARRAY_SIZE(omap3pandora_spi_board_info)); omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data, NULL); @@ -618,6 +620,6 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3pandora_init, .init_late = omap35xx_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 53a6cbc..95c10b3 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -33,6 +33,7 @@ #include <linux/interrupt.h> #include <linux/smsc911x.h> #include <linux/i2c/at24.h> +#include <linux/usb/phy.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -361,7 +362,7 @@ static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; -static struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -404,6 +405,7 @@ static void __init omap3_stalker_init(void) omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); @@ -427,6 +429,6 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_stalker_init, .init_late = omap35xx_init_late, - .timer = &omap3_secure_timer, + .init_time = omap3_secure_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 263cb9c..bcd44fb 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -28,6 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/mmc/host.h> +#include <linux/usb/phy.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/spi/spi.h> @@ -309,7 +310,7 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = { &keys_gpio, }; -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, @@ -365,6 +366,7 @@ static void __init omap3_touchbook_init(void) /* Touchscreen and accelerometer */ omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); board_nand_init(omap3touchbook_nand_partitions, @@ -386,6 +388,6 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_touchbook_init, .init_late = omap3430_init_late, - .timer = &omap3_secure_timer, + .init_time = omap3_secure_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 769c1fe..b02c2f0 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -30,10 +30,11 @@ #include <linux/regulator/fixed.h> #include <linux/ti_wilink_st.h> #include <linux/usb/musb.h> +#include <linux/usb/phy.h> #include <linux/wl12xx.h> +#include <linux/irqchip/arm-gic.h> #include <linux/platform_data/omap-abe-twl6040.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -139,7 +140,7 @@ static struct platform_device *panda_devices[] __initdata = { &btwilink_device, }; -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -447,6 +448,7 @@ static void __init omap4_panda_init(void) omap_sdrc_init(NULL, NULL); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); + usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); usb_musb_init(&musb_board_data); omap4_panda_display_init(); } @@ -459,9 +461,8 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, - .handle_irq = gic_handle_irq, .init_machine = omap4_panda_init, .init_late = omap4430_init_late, - .timer = &omap4_timer, + .init_time = omap4_local_timer_init, .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index c8fde3e..86bab51 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -36,6 +36,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mmc/host.h> +#include <linux/usb/phy.h> #include <linux/platform_data/mtd-nand-omap2.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -457,7 +458,7 @@ static int __init overo_spi_init(void) return 0; } -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -499,6 +500,7 @@ static void __init overo_init(void) mt46h32m32lf6_sdrc_params); board_nand_init(overo_nand_partitions, ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); @@ -506,7 +508,7 @@ static void __init overo_init(void) overo_display_init(); overo_init_led(); overo_init_keys(); - omap_twl4030_audio_init("overo"); + omap_twl4030_audio_init("overo", NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); @@ -551,6 +553,6 @@ MACHINE_START(OVERO, "Gumstix Overo") .handle_irq = omap3_intc_handle_irq, .init_machine = overo_init, .init_late = omap35xx_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 0c777b7..345e8c4 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -18,6 +18,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/consumer.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/usb/phy.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -134,6 +135,7 @@ static void __init rm680_init(void) sdrc_params = nokia_get_sdram_timings(); omap_sdrc_init(sdrc_params, sdrc_params); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); rm680_peripherals_init(); } @@ -147,7 +149,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .handle_irq = omap3_intc_handle_irq, .init_machine = rm680_init, .init_late = omap3630_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END @@ -160,6 +162,6 @@ MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") .handle_irq = omap3_intc_handle_irq, .init_machine = rm680_init, .init_late = omap3630_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index cf07e28..3a077df 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -40,9 +40,9 @@ #include <sound/tpa6130a2-plat.h> #include <media/radio-si4713.h> #include <media/si4713.h> -#include <linux/leds-lp5523.h> +#include <linux/platform_data/leds-lp55xx.h> -#include <../drivers/staging/iio/light/tsl2563.h> +#include <linux/platform_data/tsl2563.h> #include <linux/lis3lv02d.h> #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) @@ -160,32 +160,41 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { #endif #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) -static struct lp5523_led_config rx51_lp5523_led_config[] = { +static struct lp55xx_led_config rx51_lp5523_led_config[] = { { + .name = "lp5523:kb1", .chan_nr = 0, .led_current = 50, }, { + .name = "lp5523:kb2", .chan_nr = 1, .led_current = 50, }, { + .name = "lp5523:kb3", .chan_nr = 2, .led_current = 50, }, { + .name = "lp5523:kb4", .chan_nr = 3, .led_current = 50, }, { + .name = "lp5523:b", .chan_nr = 4, .led_current = 50, }, { + .name = "lp5523:g", .chan_nr = 5, .led_current = 50, }, { + .name = "lp5523:r", .chan_nr = 6, .led_current = 50, }, { + .name = "lp5523:kb5", .chan_nr = 7, .led_current = 50, }, { + .name = "lp5523:kb6", .chan_nr = 8, .led_current = 50, } @@ -207,10 +216,10 @@ static void rx51_lp5523_enable(bool state) gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); } -static struct lp5523_platform_data rx51_lp5523_platform_data = { +static struct lp55xx_platform_data rx51_lp5523_platform_data = { .led_config = rx51_lp5523_led_config, .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), - .clock_mode = LP5523_CLOCK_AUTO, + .clock_mode = LP55XX_CLOCK_AUTO, .setup_resources = rx51_lp5523_setup, .release_resources = rx51_lp5523_release, .enable = rx51_lp5523_enable, @@ -1253,6 +1262,16 @@ static void __init rx51_init_lirc(void) } #endif +static struct platform_device madc_hwmon = { + .name = "twl4030_madc_hwmon", + .id = -1, +}; + +static void __init rx51_init_twl4030_hwmon(void) +{ + platform_device_register(&madc_hwmon); +} + void __init rx51_peripherals_init(void) { rx51_i2c_init(); @@ -1272,5 +1291,6 @@ void __init rx51_peripherals_init(void) omap_hsmmc_init(mmc); rx51_charger_init(); + rx51_init_twl4030_hwmon(); } diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 46f4fc9..eb66726 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -18,6 +18,7 @@ #include <video/omapdss.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include "soc.h" #include "board-rx51.h" #include "mux.h" @@ -85,5 +86,5 @@ static int __init rx51_video_init(void) return 0; } -subsys_initcall(rx51_video_init); +omap_subsys_initcall(rx51_video_init); #endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */ diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index d0374ea..f7c4616 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -123,6 +123,6 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .handle_irq = omap3_intc_handle_irq, .init_machine = rx51_init, .init_late = omap3430_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index 1a3e056..6273c28 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -43,7 +43,7 @@ MACHINE_START(TI8168EVM, "ti8168evm") .map_io = ti81xx_map_io, .init_early = ti81xx_init_early, .init_irq = ti81xx_init_irq, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .init_machine = ti81xx_evm_init, .init_late = ti81xx_init_late, .restart = omap44xx_restart, @@ -55,7 +55,7 @@ MACHINE_START(TI8148EVM, "ti8148evm") .map_io = ti81xx_map_io, .init_early = ti81xx_init_early, .init_irq = ti81xx_init_irq, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .init_machine = ti81xx_evm_init, .init_late = ti81xx_init_late, .restart = omap44xx_restart, diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 1c7c834..8cef477 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -49,13 +49,13 @@ static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) { } -/* - * PWMA/B register offsets (TWL4030_MODULE_PWMA) - */ +/* Register offsets in TWL4030_MODULE_INTBR */ #define TWL_INTBR_PMBR1 0xD #define TWL_INTBR_GPBR1 0xC -#define TWL_LED_PWMON 0x0 -#define TWL_LED_PWMOFF 0x1 + +/* Register offsets in TWL_MODULE_PWM */ +#define TWL_LED_PWMON 0x3 +#define TWL_LED_PWMOFF 0x4 static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) { @@ -93,8 +93,8 @@ static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) } c = ((50 * (100 - level)) / 100) + 1; - twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF); - twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON); + twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, TWL_LED_PWMOFF); + twl_i2c_write_u8(TWL_MODULE_PWM, c, TWL_LED_PWMON); #else pr_warn("Backlight not enabled\n"); #endif diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 26e07ad..cdc0c10 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -20,6 +20,8 @@ #include <linux/wl12xx.h> #include <linux/mmc/host.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/omap-twl4030.h> +#include <linux/usb/phy.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -34,11 +36,9 @@ #include "common-board-devices.h" #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) -#define ZOOM2_HEADSET_EXTMUTE_GPIO (153) +#define OMAP_ZOOM_TSC2004_IRQ_GPIO (153) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) -#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) - /* Zoom2 has Qwerty keyboard*/ static uint32_t board_keymap[] = { KEY(0, 0, KEY_E), @@ -226,22 +226,31 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct omap_tw4030_pdata omap_twl4030_audio_data = { + .voice_connected = true, + .custom_routing = true, + + .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, + .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, + + .has_mainmic = true, + .has_submic = true, + .has_hsmic = true, + .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, +}; + static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int ret; - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap_hsmmc_late_init(mmc); - ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, - "lcd enable"); - if (ret) - pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", - LCD_PANEL_ENABLE_GPIO); + /* Audio setup */ + omap_twl4030_audio_data.jack_detect = gpio + 2; + omap_twl4030_audio_init("Zoom2", &omap_twl4030_audio_data); - return ret; + return 0; } static struct twl4030_gpio_platform_data zoom_gpio_data = { @@ -264,14 +273,9 @@ static int __init omap_i2c_init(void) TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - if (machine_is_omap_zoom2()) { - struct twl4030_codec_data *codec_data; - codec_data = zoom_twldata.audio->codec; + if (machine_is_omap_zoom2()) + zoom_twldata.audio->codec->ramp_delay_value = 3; /* 161 ms */ - codec_data->ramp_delay_value = 3; /* 161 ms */ - codec_data->hs_extmute = 1; - codec_data->hs_extmute_gpio = ZOOM2_HEADSET_EXTMUTE_GPIO; - } omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); @@ -298,6 +302,7 @@ void __init zoom_peripherals_init(void) omap_hsmmc_init(mmc); omap_i2c_init(); platform_device_register(&omap_vwlan_device); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); enable_board_wakeup_source(); omap_serial_init(); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index d7fa31e..5e4d4c9 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -92,7 +92,7 @@ static struct mtd_partition zoom_nand_partitions[] = { }, }; -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -137,7 +137,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_zoom_init, .init_late = omap3430_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END @@ -150,6 +150,6 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .handle_irq = omap3_intc_handle_irq, .init_machine = omap_zoom_init, .init_late = omap3630_init_late, - .timer = &omap3_timer, + .init_time = omap3_sync32k_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c index ab7e952..0f0a97c 100644 --- a/arch/arm/mach-omap2/cclock2420_data.c +++ b/arch/arm/mach-omap2/cclock2420_data.c @@ -622,15 +622,10 @@ static struct clk_hw_omap gpios_fck_hw = { DEFINE_STRUCT_CLK(gpios_fck, gpios_fck_parent_names, aes_ick_ops); -static struct clk wu_l4_ick; - -DEFINE_STRUCT_CLK_HW_OMAP(wu_l4_ick, "wkup_clkdm"); -DEFINE_STRUCT_CLK(wu_l4_ick, dpll_ck_parent_names, core_ck_ops); - static struct clk gpios_ick; static const char *gpios_ick_parent_names[] = { - "wu_l4_ick", + "sys_ck", }; static struct clk_hw_omap gpios_ick_hw = { @@ -1682,13 +1677,6 @@ static struct clk_hw_omap wdt1_ick_hw = { DEFINE_STRUCT_CLK(wdt1_ick, gpios_ick_parent_names, aes_ick_ops); -static struct clk wdt1_osc_ck; - -static const struct clk_ops wdt1_osc_ck_ops = {}; - -DEFINE_STRUCT_CLK_HW_OMAP(wdt1_osc_ck, NULL); -DEFINE_STRUCT_CLK(wdt1_osc_ck, sys_ck_parent_names, wdt1_osc_ck_ops); - static struct clk wdt3_fck; static struct clk_hw_omap wdt3_fck_hw = { @@ -1767,7 +1755,6 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "func_96m_ck", &func_96m_ck, CK_242X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_242X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_242X), - CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_242X), CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_242X), CLK(NULL, "sys_clkout", &sys_clkout, CK_242X), CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), @@ -1797,7 +1784,6 @@ static struct omap_clk omap2420_clks[] = { /* L4 domain clocks */ CLK(NULL, "l4_ck", &l4_ck, CK_242X), CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_242X), - CLK(NULL, "wu_l4_ick", &wu_l4_ick, CK_242X), /* virtual meta-group clock */ CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_242X), /* general l4 interface ck, multi-parent functional clk */ diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c index eb3dab6..aed8f74 100644 --- a/arch/arm/mach-omap2/cclock2430_data.c +++ b/arch/arm/mach-omap2/cclock2430_data.c @@ -601,15 +601,10 @@ static struct clk_hw_omap gpios_fck_hw = { DEFINE_STRUCT_CLK(gpios_fck, gpio5_fck_parent_names, aes_ick_ops); -static struct clk wu_l4_ick; - -DEFINE_STRUCT_CLK_HW_OMAP(wu_l4_ick, "wkup_clkdm"); -DEFINE_STRUCT_CLK(wu_l4_ick, dpll_ck_parent_names, core_ck_ops); - static struct clk gpios_ick; static const char *gpios_ick_parent_names[] = { - "wu_l4_ick", + "sys_ck", }; static struct clk_hw_omap gpios_ick_hw = { @@ -1811,13 +1806,6 @@ static struct clk_hw_omap wdt1_ick_hw = { DEFINE_STRUCT_CLK(wdt1_ick, gpios_ick_parent_names, aes_ick_ops); -static struct clk wdt1_osc_ck; - -static const struct clk_ops wdt1_osc_ck_ops = {}; - -DEFINE_STRUCT_CLK_HW_OMAP(wdt1_osc_ck, NULL); -DEFINE_STRUCT_CLK(wdt1_osc_ck, sys_ck_parent_names, wdt1_osc_ck_ops); - static struct clk wdt4_fck; static struct clk_hw_omap wdt4_fck_hw = { @@ -1869,7 +1857,6 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X), CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X), CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X), - CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X), CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X), CLK(NULL, "sys_clkout", &sys_clkout, CK_243X), CLK(NULL, "emul_ck", &emul_ck, CK_243X), @@ -1898,7 +1885,6 @@ static struct omap_clk omap2430_clks[] = { /* L4 domain clocks */ CLK(NULL, "l4_ck", &l4_ck, CK_243X), CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X), - CLK(NULL, "wu_l4_ick", &wu_l4_ick, CK_243X), /* virtual meta-group clock */ CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X), /* general l4 interface ck, multi-parent functional clk */ diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index a2cc046..cebe2b3 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -16,6 +16,10 @@ * XXX Some of the ES1 clocks have been removed/changed; once support * is added for discriminating clocks by ES level, these should be added back * in. + * + * XXX All of the remaining MODULEMODE clock nodes should be removed + * once the drivers are updated to use pm_runtime or to use the appropriate + * upstream clock node for rate/parent selection. */ #include <linux/kernel.h> @@ -315,7 +319,7 @@ DEFINE_CLK_DIVIDER(dpll_abe_m2_ck, "dpll_abe_ck", &dpll_abe_ck, 0x0, OMAP4430_CM_DIV_M2_DPLL_ABE, OMAP4430_DPLL_CLKOUT_DIV_SHIFT, OMAP4430_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL); -static const struct clk_ops dmic_fck_ops = { +static const struct clk_ops dpll_hsd_ops = { .enable = &omap2_dflt_clk_enable, .disable = &omap2_dflt_clk_disable, .is_enabled = &omap2_dflt_clk_is_enabled, @@ -325,6 +329,12 @@ static const struct clk_ops dmic_fck_ops = { .init = &omap2_init_clk_clkdm, }; +static const struct clk_ops func_dmic_abe_gfclk_ops = { + .recalc_rate = &omap2_clksel_recalc, + .get_parent = &omap2_clksel_find_parent_index, + .set_parent = &omap2_clksel_set_parent, +}; + static const char *dpll_core_m3x2_ck_parents[] = { "dpll_core_x2_ck", }; @@ -340,7 +350,7 @@ DEFINE_CLK_OMAP_MUX_GATE(dpll_core_m3x2_ck, NULL, dpll_core_m3x2_div, OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, OMAP4430_CM_DIV_M3_DPLL_CORE, OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, NULL, - dpll_core_m3x2_ck_parents, dmic_fck_ops); + dpll_core_m3x2_ck_parents, dpll_hsd_ops); DEFINE_CLK_OMAP_HSDIVIDER(dpll_core_m7x2_ck, "dpll_core_x2_ck", &dpll_core_x2_ck, 0x0, OMAP4430_CM_DIV_M7_DPLL_CORE, @@ -547,7 +557,7 @@ DEFINE_CLK_OMAP_MUX_GATE(dpll_per_m3x2_ck, NULL, dpll_per_m3x2_div, OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, OMAP4430_CM_DIV_M3_DPLL_PER, OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, NULL, - dpll_per_m3x2_ck_parents, dmic_fck_ops); + dpll_per_m3x2_ck_parents, dpll_hsd_ops); DEFINE_CLK_OMAP_HSDIVIDER(dpll_per_m4x2_ck, "dpll_per_x2_ck", &dpll_per_x2_ck, 0x0, OMAP4430_CM_DIV_M4_DPLL_PER, @@ -749,10 +759,6 @@ DEFINE_CLK_GATE(aes2_fck, "l3_div_ck", &l3_div_ck, 0x0, OMAP4430_CM_L4SEC_AES2_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(aess_fck, "aess_fclk", &aess_fclk, 0x0, - OMAP4430_CM1_ABE_AESS_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); - DEFINE_CLK_GATE(bandgap_fclk, "sys_32k_ck", &sys_32k_ck, 0x0, OMAP4430_CM_WKUP_BANDGAP_CLKCTRL, OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT, 0x0, NULL); @@ -774,11 +780,6 @@ DEFINE_CLK_GATE(bandgap_ts_fclk, "div_ts_ck", &div_ts_ck, 0x0, OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(des3des_fck, "l4_div_ck", &l4_div_ck, 0x0, - OMAP4430_CM_L4SEC_DES3DES_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); - static const char *dmic_sync_mux_ck_parents[] = { "abe_24m_fclk", "syc_clk_div_ck", "func_24m_clk", }; @@ -795,23 +796,13 @@ static const struct clksel func_dmic_abe_gfclk_sel[] = { { .parent = NULL }, }; -static const char *dmic_fck_parents[] = { +static const char *func_dmic_abe_gfclk_parents[] = { "dmic_sync_mux_ck", "pad_clks_ck", "slimbus_clk", }; -/* Merged func_dmic_abe_gfclk into dmic */ -static struct clk dmic_fck; - -DEFINE_CLK_OMAP_MUX_GATE(dmic_fck, "abe_clkdm", func_dmic_abe_gfclk_sel, - OMAP4430_CM1_ABE_DMIC_CLKCTRL, - OMAP4430_CLKSEL_SOURCE_MASK, - OMAP4430_CM1_ABE_DMIC_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - dmic_fck_parents, dmic_fck_ops); - -DEFINE_CLK_GATE(dsp_fck, "dpll_iva_m4x2_ck", &dpll_iva_m4x2_ck, 0x0, - OMAP4430_CM_TESLA_TESLA_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); +DEFINE_CLK_OMAP_MUX(func_dmic_abe_gfclk, "abe_clkdm", func_dmic_abe_gfclk_sel, + OMAP4430_CM1_ABE_DMIC_CLKCTRL, OMAP4430_CLKSEL_SOURCE_MASK, + func_dmic_abe_gfclk_parents, func_dmic_abe_gfclk_ops); DEFINE_CLK_GATE(dss_sys_clk, "syc_clk_div_ck", &syc_clk_div_ck, 0x0, OMAP4430_CM_DSS_DSS_CLKCTRL, @@ -833,177 +824,57 @@ DEFINE_CLK_GATE(dss_fck, "l3_div_ck", &l3_div_ck, 0x0, OMAP4430_CM_DSS_DSS_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(efuse_ctrl_cust_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0, - OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(emif1_fck, "ddrphy_ck", &ddrphy_ck, 0x0, - OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(emif2_fck, "ddrphy_ck", &ddrphy_ck, 0x0, - OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - DEFINE_CLK_DIVIDER(fdif_fck, "dpll_per_m4x2_ck", &dpll_per_m4x2_ck, 0x0, OMAP4430_CM_CAM_FDIF_CLKCTRL, OMAP4430_CLKSEL_FCLK_SHIFT, OMAP4430_CLKSEL_FCLK_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL); -DEFINE_CLK_GATE(fpka_fck, "l4_div_ck", &l4_div_ck, 0x0, - OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - DEFINE_CLK_GATE(gpio1_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0, OMAP4430_CM_WKUP_GPIO1_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(gpio1_ick, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, 0x0, - OMAP4430_CM_WKUP_GPIO1_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - DEFINE_CLK_GATE(gpio2_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0, OMAP4430_CM_L4PER_GPIO2_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(gpio2_ick, "l4_div_ck", &l4_div_ck, 0x0, - OMAP4430_CM_L4PER_GPIO2_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - DEFINE_CLK_GATE(gpio3_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0, OMAP4430_CM_L4PER_GPIO3_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(gpio3_ick, "l4_div_ck", &l4_div_ck, 0x0, - OMAP4430_CM_L4PER_GPIO3_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - DEFINE_CLK_GATE(gpio4_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0, OMAP4430_CM_L4PER_GPIO4_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(gpio4_ick, "l4_div_ck", &l4_div_ck, 0x0, - OMAP4430_CM_L4PER_GPIO4_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - DEFINE_CLK_GATE(gpio5_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0, OMAP4430_CM_L4PER_GPIO5_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(gpio5_ick, "l4_div_ck", &l4_div_ck, 0x0, - OMAP4430_CM_L4PER_GPIO5_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - DEFINE_CLK_GATE(gpio6_dbclk, "sys_32k_ck", &sys_32k_ck, 0x0, OMAP4430_CM_L4PER_GPIO6_CLKCTRL, OMAP4430_OPTFCLKEN_DBCLK_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(gpio6_ick, "l4_div_ck", &l4_div_ck, 0x0, - OMAP4430_CM_L4PER_GPIO6_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(gpmc_ick, "l3_div_ck", &l3_div_ck, 0x0, - OMAP4430_CM_L3_2_GPMC_CLKCTRL, OMAP4430_MODULEMODE_HWCTRL_SHIFT, - 0x0, NULL); - static const struct clksel sgx_clk_mux_sel[] = { { .parent = &dpll_core_m7x2_ck, .rates = div_1_0_rates }, { .parent = &dpll_per_m7x2_ck, .rates = div_1_1_rates }, { .parent = NULL }, }; -static const char *gpu_fck_parents[] = { +static const char *sgx_clk_mux_parents[] = { "dpll_core_m7x2_ck", "dpll_per_m7x2_ck", }; -/* Merged sgx_clk_mux into gpu */ -DEFINE_CLK_OMAP_MUX_GATE(gpu_fck, "l3_gfx_clkdm", sgx_clk_mux_sel, - OMAP4430_CM_GFX_GFX_CLKCTRL, - OMAP4430_CLKSEL_SGX_FCLK_MASK, - OMAP4430_CM_GFX_GFX_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - gpu_fck_parents, dmic_fck_ops); - -DEFINE_CLK_GATE(hdq1w_fck, "func_12m_fclk", &func_12m_fclk, 0x0, - OMAP4430_CM_L4PER_HDQ1W_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); +DEFINE_CLK_OMAP_MUX(sgx_clk_mux, "l3_gfx_clkdm", sgx_clk_mux_sel, + OMAP4430_CM_GFX_GFX_CLKCTRL, OMAP4430_CLKSEL_SGX_FCLK_MASK, + sgx_clk_mux_parents, func_dmic_abe_gfclk_ops); DEFINE_CLK_DIVIDER(hsi_fck, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, 0x0, OMAP4430_CM_L3INIT_HSI_CLKCTRL, OMAP4430_CLKSEL_24_25_SHIFT, OMAP4430_CLKSEL_24_25_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL); -DEFINE_CLK_GATE(i2c1_fck, "func_96m_fclk", &func_96m_fclk, 0x0, - OMAP4430_CM_L4PER_I2C1_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(i2c2_fck, "func_96m_fclk", &func_96m_fclk, 0x0, - OMAP4430_CM_L4PER_I2C2_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(i2c3_fck, "func_96m_fclk", &func_96m_fclk, 0x0, - OMAP4430_CM_L4PER_I2C3_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(i2c4_fck, "func_96m_fclk", &func_96m_fclk, 0x0, - OMAP4430_CM_L4PER_I2C4_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(ipu_fck, "ducati_clk_mux_ck", &ducati_clk_mux_ck, 0x0, - OMAP4430_CM_DUCATI_DUCATI_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - DEFINE_CLK_GATE(iss_ctrlclk, "func_96m_fclk", &func_96m_fclk, 0x0, OMAP4430_CM_CAM_ISS_CLKCTRL, OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(iss_fck, "ducati_clk_mux_ck", &ducati_clk_mux_ck, 0x0, - OMAP4430_CM_CAM_ISS_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); - -DEFINE_CLK_GATE(iva_fck, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck, 0x0, - OMAP4430_CM_IVAHD_IVAHD_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(kbd_fck, "sys_32k_ck", &sys_32k_ck, 0x0, - OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -static struct clk l3_instr_ick; - -static const char *l3_instr_ick_parent_names[] = { - "l3_div_ck", -}; - -static const struct clk_ops l3_instr_ick_ops = { - .enable = &omap2_dflt_clk_enable, - .disable = &omap2_dflt_clk_disable, - .is_enabled = &omap2_dflt_clk_is_enabled, - .init = &omap2_init_clk_clkdm, -}; - -static struct clk_hw_omap l3_instr_ick_hw = { - .hw = { - .clk = &l3_instr_ick, - }, - .enable_reg = OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_HWCTRL_SHIFT, - .clkdm_name = "l3_instr_clkdm", -}; - -DEFINE_STRUCT_CLK(l3_instr_ick, l3_instr_ick_parent_names, l3_instr_ick_ops); - -static struct clk l3_main_3_ick; -static struct clk_hw_omap l3_main_3_ick_hw = { - .hw = { - .clk = &l3_main_3_ick, - }, - .enable_reg = OMAP4430_CM_L3INSTR_L3_3_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_HWCTRL_SHIFT, - .clkdm_name = "l3_instr_clkdm", -}; - -DEFINE_STRUCT_CLK(l3_main_3_ick, l3_instr_ick_parent_names, l3_instr_ick_ops); - DEFINE_CLK_MUX(mcasp_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0, OMAP4430_CM1_ABE_MCASP_CLKCTRL, OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT, @@ -1016,17 +887,13 @@ static const struct clksel func_mcasp_abe_gfclk_sel[] = { { .parent = NULL }, }; -static const char *mcasp_fck_parents[] = { +static const char *func_mcasp_abe_gfclk_parents[] = { "mcasp_sync_mux_ck", "pad_clks_ck", "slimbus_clk", }; -/* Merged func_mcasp_abe_gfclk into mcasp */ -DEFINE_CLK_OMAP_MUX_GATE(mcasp_fck, "abe_clkdm", func_mcasp_abe_gfclk_sel, - OMAP4430_CM1_ABE_MCASP_CLKCTRL, - OMAP4430_CLKSEL_SOURCE_MASK, - OMAP4430_CM1_ABE_MCASP_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - mcasp_fck_parents, dmic_fck_ops); +DEFINE_CLK_OMAP_MUX(func_mcasp_abe_gfclk, "abe_clkdm", func_mcasp_abe_gfclk_sel, + OMAP4430_CM1_ABE_MCASP_CLKCTRL, OMAP4430_CLKSEL_SOURCE_MASK, + func_mcasp_abe_gfclk_parents, func_dmic_abe_gfclk_ops); DEFINE_CLK_MUX(mcbsp1_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0, OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, @@ -1040,17 +907,14 @@ static const struct clksel func_mcbsp1_gfclk_sel[] = { { .parent = NULL }, }; -static const char *mcbsp1_fck_parents[] = { +static const char *func_mcbsp1_gfclk_parents[] = { "mcbsp1_sync_mux_ck", "pad_clks_ck", "slimbus_clk", }; -/* Merged func_mcbsp1_gfclk into mcbsp1 */ -DEFINE_CLK_OMAP_MUX_GATE(mcbsp1_fck, "abe_clkdm", func_mcbsp1_gfclk_sel, - OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, - OMAP4430_CLKSEL_SOURCE_MASK, - OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - mcbsp1_fck_parents, dmic_fck_ops); +DEFINE_CLK_OMAP_MUX(func_mcbsp1_gfclk, "abe_clkdm", func_mcbsp1_gfclk_sel, + OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp1_gfclk_parents, + func_dmic_abe_gfclk_ops); DEFINE_CLK_MUX(mcbsp2_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0, OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, @@ -1064,17 +928,14 @@ static const struct clksel func_mcbsp2_gfclk_sel[] = { { .parent = NULL }, }; -static const char *mcbsp2_fck_parents[] = { +static const char *func_mcbsp2_gfclk_parents[] = { "mcbsp2_sync_mux_ck", "pad_clks_ck", "slimbus_clk", }; -/* Merged func_mcbsp2_gfclk into mcbsp2 */ -DEFINE_CLK_OMAP_MUX_GATE(mcbsp2_fck, "abe_clkdm", func_mcbsp2_gfclk_sel, - OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, - OMAP4430_CLKSEL_SOURCE_MASK, - OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - mcbsp2_fck_parents, dmic_fck_ops); +DEFINE_CLK_OMAP_MUX(func_mcbsp2_gfclk, "abe_clkdm", func_mcbsp2_gfclk_sel, + OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp2_gfclk_parents, + func_dmic_abe_gfclk_ops); DEFINE_CLK_MUX(mcbsp3_sync_mux_ck, dmic_sync_mux_ck_parents, NULL, 0x0, OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, @@ -1088,17 +949,14 @@ static const struct clksel func_mcbsp3_gfclk_sel[] = { { .parent = NULL }, }; -static const char *mcbsp3_fck_parents[] = { +static const char *func_mcbsp3_gfclk_parents[] = { "mcbsp3_sync_mux_ck", "pad_clks_ck", "slimbus_clk", }; -/* Merged func_mcbsp3_gfclk into mcbsp3 */ -DEFINE_CLK_OMAP_MUX_GATE(mcbsp3_fck, "abe_clkdm", func_mcbsp3_gfclk_sel, - OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, - OMAP4430_CLKSEL_SOURCE_MASK, - OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - mcbsp3_fck_parents, dmic_fck_ops); +DEFINE_CLK_OMAP_MUX(func_mcbsp3_gfclk, "abe_clkdm", func_mcbsp3_gfclk_sel, + OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + OMAP4430_CLKSEL_SOURCE_MASK, func_mcbsp3_gfclk_parents, + func_dmic_abe_gfclk_ops); static const char *mcbsp4_sync_mux_ck_parents[] = { "func_96m_fclk", "per_abe_nc_fclk", @@ -1115,37 +973,14 @@ static const struct clksel per_mcbsp4_gfclk_sel[] = { { .parent = NULL }, }; -static const char *mcbsp4_fck_parents[] = { +static const char *per_mcbsp4_gfclk_parents[] = { "mcbsp4_sync_mux_ck", "pad_clks_ck", }; -/* Merged per_mcbsp4_gfclk into mcbsp4 */ -DEFINE_CLK_OMAP_MUX_GATE(mcbsp4_fck, "l4_per_clkdm", per_mcbsp4_gfclk_sel, - OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, - OMAP4430_CLKSEL_SOURCE_24_24_MASK, - OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - mcbsp4_fck_parents, dmic_fck_ops); - -DEFINE_CLK_GATE(mcpdm_fck, "pad_clks_ck", &pad_clks_ck, 0x0, - OMAP4430_CM1_ABE_PDM_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); - -DEFINE_CLK_GATE(mcspi1_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_MCSPI1_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(mcspi2_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_MCSPI2_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(mcspi3_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_MCSPI3_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(mcspi4_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_MCSPI4_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); +DEFINE_CLK_OMAP_MUX(per_mcbsp4_gfclk, "l4_per_clkdm", per_mcbsp4_gfclk_sel, + OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + OMAP4430_CLKSEL_SOURCE_24_24_MASK, per_mcbsp4_gfclk_parents, + func_dmic_abe_gfclk_ops); static const struct clksel hsmmc1_fclk_sel[] = { { .parent = &func_64m_fclk, .rates = div_1_0_rates }, @@ -1153,69 +988,22 @@ static const struct clksel hsmmc1_fclk_sel[] = { { .parent = NULL }, }; -static const char *mmc1_fck_parents[] = { +static const char *hsmmc1_fclk_parents[] = { "func_64m_fclk", "func_96m_fclk", }; -/* Merged hsmmc1_fclk into mmc1 */ -DEFINE_CLK_OMAP_MUX_GATE(mmc1_fck, "l3_init_clkdm", hsmmc1_fclk_sel, - OMAP4430_CM_L3INIT_MMC1_CLKCTRL, OMAP4430_CLKSEL_MASK, - OMAP4430_CM_L3INIT_MMC1_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - mmc1_fck_parents, dmic_fck_ops); - -/* Merged hsmmc2_fclk into mmc2 */ -DEFINE_CLK_OMAP_MUX_GATE(mmc2_fck, "l3_init_clkdm", hsmmc1_fclk_sel, - OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK, - OMAP4430_CM_L3INIT_MMC2_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - mmc1_fck_parents, dmic_fck_ops); - -DEFINE_CLK_GATE(mmc3_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_MMCSD3_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(mmc4_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_MMCSD4_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(mmc5_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_MMCSD5_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, - OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL); - -DEFINE_CLK_GATE(ocp2scp_usb_phy_ick, "l4_div_ck", &l4_div_ck, 0x0, - OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, - OMAP4430_MODULEMODE_HWCTRL_SHIFT, 0x0, NULL); - -static struct clk ocp_wp_noc_ick; - -static struct clk_hw_omap ocp_wp_noc_ick_hw = { - .hw = { - .clk = &ocp_wp_noc_ick, - }, - .enable_reg = OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL, - .enable_bit = OMAP4430_MODULEMODE_HWCTRL_SHIFT, - .clkdm_name = "l3_instr_clkdm", -}; - -DEFINE_STRUCT_CLK(ocp_wp_noc_ick, l3_instr_ick_parent_names, l3_instr_ick_ops); +DEFINE_CLK_OMAP_MUX(hsmmc1_fclk, "l3_init_clkdm", hsmmc1_fclk_sel, + OMAP4430_CM_L3INIT_MMC1_CLKCTRL, OMAP4430_CLKSEL_MASK, + hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops); -DEFINE_CLK_GATE(rng_ick, "l4_div_ck", &l4_div_ck, 0x0, - OMAP4430_CM_L4SEC_RNG_CLKCTRL, OMAP4430_MODULEMODE_HWCTRL_SHIFT, - 0x0, NULL); +DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel, + OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK, + hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops); DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0, OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(sl2if_ick, "dpll_iva_m5x2_ck", &dpll_iva_m5x2_ck, 0x0, - OMAP4430_CM_IVAHD_SL2_CLKCTRL, OMAP4430_MODULEMODE_HWCTRL_SHIFT, - 0x0, NULL); - DEFINE_CLK_GATE(slimbus1_fclk_1, "func_24m_clk", &func_24m_clk, 0x0, OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL, OMAP4430_OPTFCLKEN_FCLK1_SHIFT, 0x0, NULL); @@ -1232,10 +1020,6 @@ DEFINE_CLK_GATE(slimbus1_slimbus_clk, "slimbus_clk", &slimbus_clk, 0x0, OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL, OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(slimbus1_fck, "ocp_abe_iclk", &ocp_abe_iclk, 0x0, - OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - DEFINE_CLK_GATE(slimbus2_fclk_1, "per_abe_24m_fclk", &per_abe_24m_fclk, 0x0, OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL, OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT, 0x0, NULL); @@ -1249,10 +1033,6 @@ DEFINE_CLK_GATE(slimbus2_slimbus_clk, "pad_slimbus_core_clks_ck", OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL, OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(slimbus2_fck, "l4_div_ck", &l4_div_ck, 0x0, - OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); - DEFINE_CLK_GATE(smartreflex_core_fck, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, 0x0, OMAP4430_CM_ALWON_SR_CORE_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); @@ -1271,52 +1051,35 @@ static const struct clksel dmt1_clk_mux_sel[] = { { .parent = NULL }, }; -/* Merged dmt1_clk_mux into timer1 */ -DEFINE_CLK_OMAP_MUX_GATE(timer1_fck, "l4_wkup_clkdm", dmt1_clk_mux_sel, - OMAP4430_CM_WKUP_TIMER1_CLKCTRL, OMAP4430_CLKSEL_MASK, - OMAP4430_CM_WKUP_TIMER1_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops); - -/* Merged cm2_dm10_mux into timer10 */ -DEFINE_CLK_OMAP_MUX_GATE(timer10_fck, "l4_per_clkdm", dmt1_clk_mux_sel, - OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, - OMAP4430_CLKSEL_MASK, - OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops); - -/* Merged cm2_dm11_mux into timer11 */ -DEFINE_CLK_OMAP_MUX_GATE(timer11_fck, "l4_per_clkdm", dmt1_clk_mux_sel, - OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, - OMAP4430_CLKSEL_MASK, - OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops); - -/* Merged cm2_dm2_mux into timer2 */ -DEFINE_CLK_OMAP_MUX_GATE(timer2_fck, "l4_per_clkdm", dmt1_clk_mux_sel, - OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, - OMAP4430_CLKSEL_MASK, - OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops); - -/* Merged cm2_dm3_mux into timer3 */ -DEFINE_CLK_OMAP_MUX_GATE(timer3_fck, "l4_per_clkdm", dmt1_clk_mux_sel, - OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, - OMAP4430_CLKSEL_MASK, - OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops); - -/* Merged cm2_dm4_mux into timer4 */ -DEFINE_CLK_OMAP_MUX_GATE(timer4_fck, "l4_per_clkdm", dmt1_clk_mux_sel, - OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, - OMAP4430_CLKSEL_MASK, - OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops); +DEFINE_CLK_OMAP_MUX(dmt1_clk_mux, "l4_wkup_clkdm", dmt1_clk_mux_sel, + OMAP4430_CM_WKUP_TIMER1_CLKCTRL, OMAP4430_CLKSEL_MASK, + abe_dpll_bypass_clk_mux_ck_parents, + func_dmic_abe_gfclk_ops); + +DEFINE_CLK_OMAP_MUX(cm2_dm10_mux, "l4_per_clkdm", dmt1_clk_mux_sel, + OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, OMAP4430_CLKSEL_MASK, + abe_dpll_bypass_clk_mux_ck_parents, + func_dmic_abe_gfclk_ops); + +DEFINE_CLK_OMAP_MUX(cm2_dm11_mux, "l4_per_clkdm", dmt1_clk_mux_sel, + OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, OMAP4430_CLKSEL_MASK, + abe_dpll_bypass_clk_mux_ck_parents, + func_dmic_abe_gfclk_ops); + +DEFINE_CLK_OMAP_MUX(cm2_dm2_mux, "l4_per_clkdm", dmt1_clk_mux_sel, + OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, OMAP4430_CLKSEL_MASK, + abe_dpll_bypass_clk_mux_ck_parents, + func_dmic_abe_gfclk_ops); + +DEFINE_CLK_OMAP_MUX(cm2_dm3_mux, "l4_per_clkdm", dmt1_clk_mux_sel, + OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, OMAP4430_CLKSEL_MASK, + abe_dpll_bypass_clk_mux_ck_parents, + func_dmic_abe_gfclk_ops); + +DEFINE_CLK_OMAP_MUX(cm2_dm4_mux, "l4_per_clkdm", dmt1_clk_mux_sel, + OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, OMAP4430_CLKSEL_MASK, + abe_dpll_bypass_clk_mux_ck_parents, + func_dmic_abe_gfclk_ops); static const struct clksel timer5_sync_mux_sel[] = { { .parent = &syc_clk_div_ck, .rates = div_1_0_rates }, @@ -1324,61 +1087,30 @@ static const struct clksel timer5_sync_mux_sel[] = { { .parent = NULL }, }; -static const char *timer5_fck_parents[] = { +static const char *timer5_sync_mux_parents[] = { "syc_clk_div_ck", "sys_32k_ck", }; -/* Merged timer5_sync_mux into timer5 */ -DEFINE_CLK_OMAP_MUX_GATE(timer5_fck, "abe_clkdm", timer5_sync_mux_sel, - OMAP4430_CM1_ABE_TIMER5_CLKCTRL, OMAP4430_CLKSEL_MASK, - OMAP4430_CM1_ABE_TIMER5_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - timer5_fck_parents, dmic_fck_ops); - -/* Merged timer6_sync_mux into timer6 */ -DEFINE_CLK_OMAP_MUX_GATE(timer6_fck, "abe_clkdm", timer5_sync_mux_sel, - OMAP4430_CM1_ABE_TIMER6_CLKCTRL, OMAP4430_CLKSEL_MASK, - OMAP4430_CM1_ABE_TIMER6_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - timer5_fck_parents, dmic_fck_ops); - -/* Merged timer7_sync_mux into timer7 */ -DEFINE_CLK_OMAP_MUX_GATE(timer7_fck, "abe_clkdm", timer5_sync_mux_sel, - OMAP4430_CM1_ABE_TIMER7_CLKCTRL, OMAP4430_CLKSEL_MASK, - OMAP4430_CM1_ABE_TIMER7_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - timer5_fck_parents, dmic_fck_ops); - -/* Merged timer8_sync_mux into timer8 */ -DEFINE_CLK_OMAP_MUX_GATE(timer8_fck, "abe_clkdm", timer5_sync_mux_sel, - OMAP4430_CM1_ABE_TIMER8_CLKCTRL, OMAP4430_CLKSEL_MASK, - OMAP4430_CM1_ABE_TIMER8_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - timer5_fck_parents, dmic_fck_ops); - -/* Merged cm2_dm9_mux into timer9 */ -DEFINE_CLK_OMAP_MUX_GATE(timer9_fck, "l4_per_clkdm", dmt1_clk_mux_sel, - OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, - OMAP4430_CLKSEL_MASK, - OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, NULL, - abe_dpll_bypass_clk_mux_ck_parents, dmic_fck_ops); - -DEFINE_CLK_GATE(uart1_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_UART1_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); +DEFINE_CLK_OMAP_MUX(timer5_sync_mux, "abe_clkdm", timer5_sync_mux_sel, + OMAP4430_CM1_ABE_TIMER5_CLKCTRL, OMAP4430_CLKSEL_MASK, + timer5_sync_mux_parents, func_dmic_abe_gfclk_ops); -DEFINE_CLK_GATE(uart2_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_UART2_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); +DEFINE_CLK_OMAP_MUX(timer6_sync_mux, "abe_clkdm", timer5_sync_mux_sel, + OMAP4430_CM1_ABE_TIMER6_CLKCTRL, OMAP4430_CLKSEL_MASK, + timer5_sync_mux_parents, func_dmic_abe_gfclk_ops); -DEFINE_CLK_GATE(uart3_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_UART3_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); +DEFINE_CLK_OMAP_MUX(timer7_sync_mux, "abe_clkdm", timer5_sync_mux_sel, + OMAP4430_CM1_ABE_TIMER7_CLKCTRL, OMAP4430_CLKSEL_MASK, + timer5_sync_mux_parents, func_dmic_abe_gfclk_ops); -DEFINE_CLK_GATE(uart4_fck, "func_48m_fclk", &func_48m_fclk, 0x0, - OMAP4430_CM_L4PER_UART4_CLKCTRL, - OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); +DEFINE_CLK_OMAP_MUX(timer8_sync_mux, "abe_clkdm", timer5_sync_mux_sel, + OMAP4430_CM1_ABE_TIMER8_CLKCTRL, OMAP4430_CLKSEL_MASK, + timer5_sync_mux_parents, func_dmic_abe_gfclk_ops); + +DEFINE_CLK_OMAP_MUX(cm2_dm9_mux, "l4_per_clkdm", dmt1_clk_mux_sel, + OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, OMAP4430_CLKSEL_MASK, + abe_dpll_bypass_clk_mux_ck_parents, + func_dmic_abe_gfclk_ops); static struct clk usb_host_fs_fck; @@ -1512,18 +1244,6 @@ DEFINE_CLK_GATE(usim_fclk, "usim_ck", &usim_ck, 0x0, OMAP4430_CM_WKUP_USIM_CLKCTRL, OMAP4430_OPTFCLKEN_FCLK_SHIFT, 0x0, NULL); -DEFINE_CLK_GATE(usim_fck, "sys_32k_ck", &sys_32k_ck, 0x0, - OMAP4430_CM_WKUP_USIM_CLKCTRL, OMAP4430_MODULEMODE_HWCTRL_SHIFT, - 0x0, NULL); - -DEFINE_CLK_GATE(wd_timer2_fck, "sys_32k_ck", &sys_32k_ck, 0x0, - OMAP4430_CM_WKUP_WDT2_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); - -DEFINE_CLK_GATE(wd_timer3_fck, "sys_32k_ck", &sys_32k_ck, 0x0, - OMAP4430_CM1_ABE_WDT3_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); - /* Remaining optional clocks */ static const char *pmd_stm_clock_mux_ck_parents[] = { "sys_clkin_ck", "dpll_core_m6x2_ck", "tie_low_clock_ck", @@ -1774,106 +1494,61 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X), CLK(NULL, "aes1_fck", &aes1_fck, CK_443X), CLK(NULL, "aes2_fck", &aes2_fck, CK_443X), - CLK(NULL, "aess_fck", &aess_fck, CK_443X), CLK(NULL, "bandgap_fclk", &bandgap_fclk, CK_443X), CLK(NULL, "div_ts_ck", &div_ts_ck, CK_446X), CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk, CK_446X), - CLK(NULL, "des3des_fck", &des3des_fck, CK_443X), CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), - CLK(NULL, "dmic_fck", &dmic_fck, CK_443X), - CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), + CLK(NULL, "func_dmic_abe_gfclk", &func_dmic_abe_gfclk, CK_443X), CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X), CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X), CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X), CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X), CLK(NULL, "dss_fck", &dss_fck, CK_443X), CLK("omapdss_dss", "ick", &dss_fck, CK_443X), - CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), - CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), - CLK(NULL, "emif2_fck", &emif2_fck, CK_443X), CLK(NULL, "fdif_fck", &fdif_fck, CK_443X), - CLK(NULL, "fpka_fck", &fpka_fck, CK_443X), CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_443X), - CLK(NULL, "gpio1_ick", &gpio1_ick, CK_443X), CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_443X), - CLK(NULL, "gpio2_ick", &gpio2_ick, CK_443X), CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_443X), - CLK(NULL, "gpio3_ick", &gpio3_ick, CK_443X), CLK(NULL, "gpio4_dbclk", &gpio4_dbclk, CK_443X), - CLK(NULL, "gpio4_ick", &gpio4_ick, CK_443X), CLK(NULL, "gpio5_dbclk", &gpio5_dbclk, CK_443X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_443X), CLK(NULL, "gpio6_dbclk", &gpio6_dbclk, CK_443X), - CLK(NULL, "gpio6_ick", &gpio6_ick, CK_443X), - CLK(NULL, "gpmc_ick", &gpmc_ick, CK_443X), - CLK(NULL, "gpu_fck", &gpu_fck, CK_443X), - CLK(NULL, "hdq1w_fck", &hdq1w_fck, CK_443X), + CLK(NULL, "sgx_clk_mux", &sgx_clk_mux, CK_443X), CLK(NULL, "hsi_fck", &hsi_fck, CK_443X), - CLK(NULL, "i2c1_fck", &i2c1_fck, CK_443X), - CLK(NULL, "i2c2_fck", &i2c2_fck, CK_443X), - CLK(NULL, "i2c3_fck", &i2c3_fck, CK_443X), - CLK(NULL, "i2c4_fck", &i2c4_fck, CK_443X), - CLK(NULL, "ipu_fck", &ipu_fck, CK_443X), CLK(NULL, "iss_ctrlclk", &iss_ctrlclk, CK_443X), - CLK(NULL, "iss_fck", &iss_fck, CK_443X), - CLK(NULL, "iva_fck", &iva_fck, CK_443X), - CLK(NULL, "kbd_fck", &kbd_fck, CK_443X), - CLK(NULL, "l3_instr_ick", &l3_instr_ick, CK_443X), - CLK(NULL, "l3_main_3_ick", &l3_main_3_ick, CK_443X), CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X), - CLK(NULL, "mcasp_fck", &mcasp_fck, CK_443X), + CLK(NULL, "func_mcasp_abe_gfclk", &func_mcasp_abe_gfclk, CK_443X), CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X), - CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_443X), + CLK(NULL, "func_mcbsp1_gfclk", &func_mcbsp1_gfclk, CK_443X), CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X), - CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_443X), + CLK(NULL, "func_mcbsp2_gfclk", &func_mcbsp2_gfclk, CK_443X), CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X), - CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_443X), + CLK(NULL, "func_mcbsp3_gfclk", &func_mcbsp3_gfclk, CK_443X), CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X), - CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_443X), - CLK(NULL, "mcpdm_fck", &mcpdm_fck, CK_443X), - CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_443X), - CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_443X), - CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_443X), - CLK(NULL, "mcspi4_fck", &mcspi4_fck, CK_443X), - CLK(NULL, "mmc1_fck", &mmc1_fck, CK_443X), - CLK(NULL, "mmc2_fck", &mmc2_fck, CK_443X), - CLK(NULL, "mmc3_fck", &mmc3_fck, CK_443X), - CLK(NULL, "mmc4_fck", &mmc4_fck, CK_443X), - CLK(NULL, "mmc5_fck", &mmc5_fck, CK_443X), - CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), - CLK(NULL, "ocp2scp_usb_phy_ick", &ocp2scp_usb_phy_ick, CK_443X), - CLK(NULL, "ocp_wp_noc_ick", &ocp_wp_noc_ick, CK_443X), - CLK(NULL, "rng_ick", &rng_ick, CK_443X), - CLK("omap_rng", "ick", &rng_ick, CK_443X), + CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X), + CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X), + CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X), CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X), - CLK(NULL, "sl2if_ick", &sl2if_ick, CK_443X), CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X), CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X), CLK(NULL, "slimbus1_fclk_2", &slimbus1_fclk_2, CK_443X), CLK(NULL, "slimbus1_slimbus_clk", &slimbus1_slimbus_clk, CK_443X), - CLK(NULL, "slimbus1_fck", &slimbus1_fck, CK_443X), CLK(NULL, "slimbus2_fclk_1", &slimbus2_fclk_1, CK_443X), CLK(NULL, "slimbus2_fclk_0", &slimbus2_fclk_0, CK_443X), CLK(NULL, "slimbus2_slimbus_clk", &slimbus2_slimbus_clk, CK_443X), - CLK(NULL, "slimbus2_fck", &slimbus2_fck, CK_443X), CLK(NULL, "smartreflex_core_fck", &smartreflex_core_fck, CK_443X), CLK(NULL, "smartreflex_iva_fck", &smartreflex_iva_fck, CK_443X), CLK(NULL, "smartreflex_mpu_fck", &smartreflex_mpu_fck, CK_443X), - CLK(NULL, "timer1_fck", &timer1_fck, CK_443X), - CLK(NULL, "timer10_fck", &timer10_fck, CK_443X), - CLK(NULL, "timer11_fck", &timer11_fck, CK_443X), - CLK(NULL, "timer2_fck", &timer2_fck, CK_443X), - CLK(NULL, "timer3_fck", &timer3_fck, CK_443X), - CLK(NULL, "timer4_fck", &timer4_fck, CK_443X), - CLK(NULL, "timer5_fck", &timer5_fck, CK_443X), - CLK(NULL, "timer6_fck", &timer6_fck, CK_443X), - CLK(NULL, "timer7_fck", &timer7_fck, CK_443X), - CLK(NULL, "timer8_fck", &timer8_fck, CK_443X), - CLK(NULL, "timer9_fck", &timer9_fck, CK_443X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_443X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_443X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), - CLK(NULL, "uart4_fck", &uart4_fck, CK_443X), + CLK(NULL, "dmt1_clk_mux", &dmt1_clk_mux, CK_443X), + CLK(NULL, "cm2_dm10_mux", &cm2_dm10_mux, CK_443X), + CLK(NULL, "cm2_dm11_mux", &cm2_dm11_mux, CK_443X), + CLK(NULL, "cm2_dm2_mux", &cm2_dm2_mux, CK_443X), + CLK(NULL, "cm2_dm3_mux", &cm2_dm3_mux, CK_443X), + CLK(NULL, "cm2_dm4_mux", &cm2_dm4_mux, CK_443X), + CLK(NULL, "timer5_sync_mux", &timer5_sync_mux, CK_443X), + CLK(NULL, "timer6_sync_mux", &timer6_sync_mux, CK_443X), + CLK(NULL, "timer7_sync_mux", &timer7_sync_mux, CK_443X), + CLK(NULL, "timer8_sync_mux", &timer8_sync_mux, CK_443X), + CLK(NULL, "cm2_dm9_mux", &cm2_dm9_mux, CK_443X), CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X), CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X), CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), @@ -1901,9 +1576,6 @@ static struct omap_clk omap44xx_clks[] = { CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick, CK_443X), CLK(NULL, "usim_ck", &usim_ck, CK_443X), CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), - CLK(NULL, "usim_fck", &usim_fck, CK_443X), - CLK(NULL, "wd_timer2_fck", &wd_timer2_fck, CK_443X), - CLK(NULL, "wd_timer3_fck", &wd_timer3_fck, CK_443X), CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X), CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X), CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X), @@ -1980,15 +1652,6 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X), }; -static const char *enable_init_clks[] = { - "emif1_fck", - "emif2_fck", - "gpmc_ick", - "l3_instr_ick", - "l3_main_3_ick", - "ocp_wp_noc_ick", -}; - int __init omap4xxx_clk_init(void) { u32 cpu_clkflg; @@ -2019,9 +1682,6 @@ int __init omap4xxx_clk_init(void) omap2_clk_disable_autoidle_all(); - omap2_clk_enable_init_clocks(enable_init_clks, - ARRAY_SIZE(enable_init_clks)); - /* * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power * state when turning the ABE clock domain. Workaround this by diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index 1ff6469..b870f6a 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -52,6 +52,6 @@ static int __init omap2xxx_clk_arch_init(void) return ret; } -arch_initcall(omap2xxx_clk_arch_init); +omap_arch_initcall(omap2xxx_clk_arch_init); diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 4eacab8..0b02b41 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -94,6 +94,6 @@ static int __init omap3xxx_clk_arch_init(void) return ret; } -arch_initcall(omap3xxx_clk_arch_init); +omap_arch_initcall(omap3xxx_clk_arch_init); diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 7faf82d..2da3b5e 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -92,8 +92,6 @@ static int _clkdm_register(struct clockdomain *clkdm) pwrdm_add_clkdm(pwrdm, clkdm); - spin_lock_init(&clkdm->lock); - pr_debug("clockdomain: registered %s\n", clkdm->name); return 0; @@ -122,7 +120,7 @@ static struct clkdm_dep *_clkdm_deps_lookup(struct clockdomain *clkdm, return cd; } -/* +/** * _autodep_lookup - resolve autodep clkdm names to clkdm pointers; store * @autodep: struct clkdm_autodep * to resolve * @@ -154,88 +152,206 @@ static void _autodep_lookup(struct clkdm_autodep *autodep) autodep->clkdm.ptr = clkdm; } -/* - * _clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable - * @clkdm: struct clockdomain * +/** + * _resolve_clkdm_deps() - resolve clkdm_names in @clkdm_deps to clkdms + * @clkdm: clockdomain that we are resolving dependencies for + * @clkdm_deps: ptr to array of struct clkdm_deps to resolve * - * Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm' - * in hardware-supervised mode. Meant to be called from clock framework - * when a clock inside clockdomain 'clkdm' is enabled. No return value. + * Iterates through @clkdm_deps, looking up the struct clockdomain named by + * clkdm_name and storing the clockdomain pointer in the struct clkdm_dep. + * No return value. + */ +static void _resolve_clkdm_deps(struct clockdomain *clkdm, + struct clkdm_dep *clkdm_deps) +{ + struct clkdm_dep *cd; + + for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) { + if (cd->clkdm) + continue; + cd->clkdm = _clkdm_lookup(cd->clkdm_name); + + WARN(!cd->clkdm, "clockdomain: %s: could not find clkdm %s while resolving dependencies - should never happen", + clkdm->name, cd->clkdm_name); + } +} + +/** + * _clkdm_add_wkdep - add a wakeup dependency from clkdm2 to clkdm1 (lockless) + * @clkdm1: wake this struct clockdomain * up (dependent) + * @clkdm2: when this struct clockdomain * wakes up (source) * - * XXX autodeps are deprecated and should be removed at the earliest - * opportunity + * When the clockdomain represented by @clkdm2 wakes up, wake up + * @clkdm1. Implemented in hardware on the OMAP, this feature is + * designed to reduce wakeup latency of the dependent clockdomain @clkdm1. + * Returns -EINVAL if presented with invalid clockdomain pointers, + * -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or 0 upon + * success. */ -void _clkdm_add_autodeps(struct clockdomain *clkdm) +static int _clkdm_add_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) { - struct clkdm_autodep *autodep; + struct clkdm_dep *cd; + int ret = 0; - if (!autodeps || clkdm->flags & CLKDM_NO_AUTODEPS) - return; + if (!clkdm1 || !clkdm2) + return -EINVAL; - for (autodep = autodeps; autodep->clkdm.ptr; autodep++) { - if (IS_ERR(autodep->clkdm.ptr)) - continue; + cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); + if (IS_ERR(cd)) + ret = PTR_ERR(cd); - pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n", - clkdm->name, autodep->clkdm.ptr->name); + if (!arch_clkdm || !arch_clkdm->clkdm_add_wkdep) + ret = -EINVAL; + + if (ret) { + pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n", + clkdm1->name, clkdm2->name); + return ret; + } + + cd->wkdep_usecount++; + if (cd->wkdep_usecount == 1) { + pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n", + clkdm1->name, clkdm2->name); - clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr); - clkdm_add_wkdep(clkdm, autodep->clkdm.ptr); + ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2); } + + return ret; } -/* - * _clkdm_add_autodeps - remove auto sleepdeps/wkdeps from clkdm - * @clkdm: struct clockdomain * +/** + * _clkdm_del_wkdep - remove a wakeup dep from clkdm2 to clkdm1 (lockless) + * @clkdm1: wake this struct clockdomain * up (dependent) + * @clkdm2: when this struct clockdomain * wakes up (source) * - * Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm' - * in hardware-supervised mode. Meant to be called from clock framework - * when a clock inside clockdomain 'clkdm' is disabled. No return value. + * Remove a wakeup dependency causing @clkdm1 to wake up when @clkdm2 + * wakes up. Returns -EINVAL if presented with invalid clockdomain + * pointers, -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or + * 0 upon success. + */ +static int _clkdm_del_wkdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) +{ + struct clkdm_dep *cd; + int ret = 0; + + if (!clkdm1 || !clkdm2) + return -EINVAL; + + cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); + if (IS_ERR(cd)) + ret = PTR_ERR(cd); + + if (!arch_clkdm || !arch_clkdm->clkdm_del_wkdep) + ret = -EINVAL; + + if (ret) { + pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n", + clkdm1->name, clkdm2->name); + return ret; + } + + cd->wkdep_usecount--; + if (cd->wkdep_usecount == 0) { + pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n", + clkdm1->name, clkdm2->name); + + ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2); + } + + return ret; +} + +/** + * _clkdm_add_sleepdep - add a sleep dependency from clkdm2 to clkdm1 (lockless) + * @clkdm1: prevent this struct clockdomain * from sleeping (dependent) + * @clkdm2: when this struct clockdomain * is active (source) * - * XXX autodeps are deprecated and should be removed at the earliest - * opportunity + * Prevent @clkdm1 from automatically going inactive (and then to + * retention or off) if @clkdm2 is active. Returns -EINVAL if + * presented with invalid clockdomain pointers or called on a machine + * that does not support software-configurable hardware sleep + * dependencies, -ENOENT if the specified dependency cannot be set in + * hardware, or 0 upon success. */ -void _clkdm_del_autodeps(struct clockdomain *clkdm) +static int _clkdm_add_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) { - struct clkdm_autodep *autodep; + struct clkdm_dep *cd; + int ret = 0; - if (!autodeps || clkdm->flags & CLKDM_NO_AUTODEPS) - return; + if (!clkdm1 || !clkdm2) + return -EINVAL; - for (autodep = autodeps; autodep->clkdm.ptr; autodep++) { - if (IS_ERR(autodep->clkdm.ptr)) - continue; + cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs); + if (IS_ERR(cd)) + ret = PTR_ERR(cd); - pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n", - clkdm->name, autodep->clkdm.ptr->name); + if (!arch_clkdm || !arch_clkdm->clkdm_add_sleepdep) + ret = -EINVAL; - clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr); - clkdm_del_wkdep(clkdm, autodep->clkdm.ptr); + if (ret) { + pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n", + clkdm1->name, clkdm2->name); + return ret; + } + + cd->sleepdep_usecount++; + if (cd->sleepdep_usecount == 1) { + pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n", + clkdm1->name, clkdm2->name); + + ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2); } + + return ret; } /** - * _resolve_clkdm_deps() - resolve clkdm_names in @clkdm_deps to clkdms - * @clkdm: clockdomain that we are resolving dependencies for - * @clkdm_deps: ptr to array of struct clkdm_deps to resolve + * _clkdm_del_sleepdep - remove a sleep dep from clkdm2 to clkdm1 (lockless) + * @clkdm1: prevent this struct clockdomain * from sleeping (dependent) + * @clkdm2: when this struct clockdomain * is active (source) * - * Iterates through @clkdm_deps, looking up the struct clockdomain named by - * clkdm_name and storing the clockdomain pointer in the struct clkdm_dep. - * No return value. + * Allow @clkdm1 to automatically go inactive (and then to retention or + * off), independent of the activity state of @clkdm2. Returns -EINVAL + * if presented with invalid clockdomain pointers or called on a machine + * that does not support software-configurable hardware sleep dependencies, + * -ENOENT if the specified dependency cannot be cleared in hardware, or + * 0 upon success. */ -static void _resolve_clkdm_deps(struct clockdomain *clkdm, - struct clkdm_dep *clkdm_deps) +static int _clkdm_del_sleepdep(struct clockdomain *clkdm1, + struct clockdomain *clkdm2) { struct clkdm_dep *cd; + int ret = 0; - for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) { - if (cd->clkdm) - continue; - cd->clkdm = _clkdm_lookup(cd->clkdm_name); + if (!clkdm1 || !clkdm2) + return -EINVAL; - WARN(!cd->clkdm, "clockdomain: %s: could not find clkdm %s while resolving dependencies - should never happen", - clkdm->name, cd->clkdm_name); + cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs); + if (IS_ERR(cd)) + ret = PTR_ERR(cd); + + if (!arch_clkdm || !arch_clkdm->clkdm_del_sleepdep) + ret = -EINVAL; + + if (ret) { + pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n", + clkdm1->name, clkdm2->name); + return ret; } + + cd->sleepdep_usecount--; + if (cd->sleepdep_usecount == 0) { + pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n", + clkdm1->name, clkdm2->name); + + ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2); + } + + return ret; } /* Public functions */ @@ -456,30 +572,18 @@ struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm) int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; - int ret = 0; + int ret; if (!clkdm1 || !clkdm2) return -EINVAL; cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); if (IS_ERR(cd)) - ret = PTR_ERR(cd); + return PTR_ERR(cd); - if (!arch_clkdm || !arch_clkdm->clkdm_add_wkdep) - ret = -EINVAL; - - if (ret) { - pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n", - clkdm1->name, clkdm2->name); - return ret; - } - - if (atomic_inc_return(&cd->wkdep_usecount) == 1) { - pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n", - clkdm1->name, clkdm2->name); - - ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2); - } + pwrdm_lock(cd->clkdm->pwrdm.ptr); + ret = _clkdm_add_wkdep(clkdm1, clkdm2); + pwrdm_unlock(cd->clkdm->pwrdm.ptr); return ret; } @@ -497,30 +601,18 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; - int ret = 0; + int ret; if (!clkdm1 || !clkdm2) return -EINVAL; cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); if (IS_ERR(cd)) - ret = PTR_ERR(cd); + return PTR_ERR(cd); - if (!arch_clkdm || !arch_clkdm->clkdm_del_wkdep) - ret = -EINVAL; - - if (ret) { - pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n", - clkdm1->name, clkdm2->name); - return ret; - } - - if (atomic_dec_return(&cd->wkdep_usecount) == 0) { - pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n", - clkdm1->name, clkdm2->name); - - ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2); - } + pwrdm_lock(cd->clkdm->pwrdm.ptr); + ret = _clkdm_del_wkdep(clkdm1, clkdm2); + pwrdm_unlock(cd->clkdm->pwrdm.ptr); return ret; } @@ -560,7 +652,7 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) return ret; } - /* XXX It's faster to return the atomic wkdep_usecount */ + /* XXX It's faster to return the wkdep_usecount */ return arch_clkdm->clkdm_read_wkdep(clkdm1, clkdm2); } @@ -600,30 +692,18 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; - int ret = 0; + int ret; if (!clkdm1 || !clkdm2) return -EINVAL; - cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs); + cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); if (IS_ERR(cd)) - ret = PTR_ERR(cd); + return PTR_ERR(cd); - if (!arch_clkdm || !arch_clkdm->clkdm_add_sleepdep) - ret = -EINVAL; - - if (ret) { - pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n", - clkdm1->name, clkdm2->name); - return ret; - } - - if (atomic_inc_return(&cd->sleepdep_usecount) == 1) { - pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n", - clkdm1->name, clkdm2->name); - - ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2); - } + pwrdm_lock(cd->clkdm->pwrdm.ptr); + ret = _clkdm_add_sleepdep(clkdm1, clkdm2); + pwrdm_unlock(cd->clkdm->pwrdm.ptr); return ret; } @@ -643,30 +723,18 @@ int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; - int ret = 0; + int ret; if (!clkdm1 || !clkdm2) return -EINVAL; - cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs); + cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); if (IS_ERR(cd)) - ret = PTR_ERR(cd); + return PTR_ERR(cd); - if (!arch_clkdm || !arch_clkdm->clkdm_del_sleepdep) - ret = -EINVAL; - - if (ret) { - pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n", - clkdm1->name, clkdm2->name); - return ret; - } - - if (atomic_dec_return(&cd->sleepdep_usecount) == 0) { - pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n", - clkdm1->name, clkdm2->name); - - ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2); - } + pwrdm_lock(cd->clkdm->pwrdm.ptr); + ret = _clkdm_del_sleepdep(clkdm1, clkdm2); + pwrdm_unlock(cd->clkdm->pwrdm.ptr); return ret; } @@ -708,7 +776,7 @@ int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) return ret; } - /* XXX It's faster to return the atomic sleepdep_usecount */ + /* XXX It's faster to return the sleepdep_usecount */ return arch_clkdm->clkdm_read_sleepdep(clkdm1, clkdm2); } @@ -734,18 +802,17 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) } /** - * clkdm_sleep - force clockdomain sleep transition + * clkdm_sleep_nolock - force clockdomain sleep transition (lockless) * @clkdm: struct clockdomain * * * Instruct the CM to force a sleep transition on the specified - * clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if - * clockdomain does not support software-initiated sleep; 0 upon - * success. + * clockdomain @clkdm. Only for use by the powerdomain code. Returns + * -EINVAL if @clkdm is NULL or if clockdomain does not support + * software-initiated sleep; 0 upon success. */ -int clkdm_sleep(struct clockdomain *clkdm) +int clkdm_sleep_nolock(struct clockdomain *clkdm) { int ret; - unsigned long flags; if (!clkdm) return -EINVAL; @@ -761,26 +828,45 @@ int clkdm_sleep(struct clockdomain *clkdm) pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name); - spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; ret = arch_clkdm->clkdm_sleep(clkdm); - spin_unlock_irqrestore(&clkdm->lock, flags); + ret |= pwrdm_state_switch_nolock(clkdm->pwrdm.ptr); + return ret; } /** - * clkdm_wakeup - force clockdomain wakeup transition + * clkdm_sleep - force clockdomain sleep transition * @clkdm: struct clockdomain * * - * Instruct the CM to force a wakeup transition on the specified - * clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if the - * clockdomain does not support software-controlled wakeup; 0 upon + * Instruct the CM to force a sleep transition on the specified + * clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if + * clockdomain does not support software-initiated sleep; 0 upon * success. */ -int clkdm_wakeup(struct clockdomain *clkdm) +int clkdm_sleep(struct clockdomain *clkdm) +{ + int ret; + + pwrdm_lock(clkdm->pwrdm.ptr); + ret = clkdm_sleep_nolock(clkdm); + pwrdm_unlock(clkdm->pwrdm.ptr); + + return ret; +} + +/** + * clkdm_wakeup_nolock - force clockdomain wakeup transition (lockless) + * @clkdm: struct clockdomain * + * + * Instruct the CM to force a wakeup transition on the specified + * clockdomain @clkdm. Only for use by the powerdomain code. Returns + * -EINVAL if @clkdm is NULL or if the clockdomain does not support + * software-controlled wakeup; 0 upon success. + */ +int clkdm_wakeup_nolock(struct clockdomain *clkdm) { int ret; - unsigned long flags; if (!clkdm) return -EINVAL; @@ -796,28 +882,46 @@ int clkdm_wakeup(struct clockdomain *clkdm) pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name); - spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; ret = arch_clkdm->clkdm_wakeup(clkdm); - ret |= pwrdm_state_switch(clkdm->pwrdm.ptr); - spin_unlock_irqrestore(&clkdm->lock, flags); + ret |= pwrdm_state_switch_nolock(clkdm->pwrdm.ptr); + return ret; } /** - * clkdm_allow_idle - enable hwsup idle transitions for clkdm + * clkdm_wakeup - force clockdomain wakeup transition * @clkdm: struct clockdomain * * - * Allow the hardware to automatically switch the clockdomain @clkdm into - * active or idle states, as needed by downstream clocks. If the + * Instruct the CM to force a wakeup transition on the specified + * clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if the + * clockdomain does not support software-controlled wakeup; 0 upon + * success. + */ +int clkdm_wakeup(struct clockdomain *clkdm) +{ + int ret; + + pwrdm_lock(clkdm->pwrdm.ptr); + ret = clkdm_wakeup_nolock(clkdm); + pwrdm_unlock(clkdm->pwrdm.ptr); + + return ret; +} + +/** + * clkdm_allow_idle_nolock - enable hwsup idle transitions for clkdm + * @clkdm: struct clockdomain * + * + * Allow the hardware to automatically switch the clockdomain @clkdm + * into active or idle states, as needed by downstream clocks. If the * clockdomain has any downstream clocks enabled in the clock * framework, wkdep/sleepdep autodependencies are added; this is so - * device drivers can read and write to the device. No return value. + * device drivers can read and write to the device. Only for use by + * the powerdomain code. No return value. */ -void clkdm_allow_idle(struct clockdomain *clkdm) +void clkdm_allow_idle_nolock(struct clockdomain *clkdm) { - unsigned long flags; - if (!clkdm) return; @@ -833,11 +937,26 @@ void clkdm_allow_idle(struct clockdomain *clkdm) pr_debug("clockdomain: enabling automatic idle transitions for %s\n", clkdm->name); - spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags |= _CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_allow_idle(clkdm); - pwrdm_state_switch(clkdm->pwrdm.ptr); - spin_unlock_irqrestore(&clkdm->lock, flags); + pwrdm_state_switch_nolock(clkdm->pwrdm.ptr); +} + +/** + * clkdm_allow_idle - enable hwsup idle transitions for clkdm + * @clkdm: struct clockdomain * + * + * Allow the hardware to automatically switch the clockdomain @clkdm into + * active or idle states, as needed by downstream clocks. If the + * clockdomain has any downstream clocks enabled in the clock + * framework, wkdep/sleepdep autodependencies are added; this is so + * device drivers can read and write to the device. No return value. + */ +void clkdm_allow_idle(struct clockdomain *clkdm) +{ + pwrdm_lock(clkdm->pwrdm.ptr); + clkdm_allow_idle_nolock(clkdm); + pwrdm_unlock(clkdm->pwrdm.ptr); } /** @@ -847,12 +966,11 @@ void clkdm_allow_idle(struct clockdomain *clkdm) * Prevent the hardware from automatically switching the clockdomain * @clkdm into inactive or idle states. If the clockdomain has * downstream clocks enabled in the clock framework, wkdep/sleepdep - * autodependencies are removed. No return value. + * autodependencies are removed. Only for use by the powerdomain + * code. No return value. */ -void clkdm_deny_idle(struct clockdomain *clkdm) +void clkdm_deny_idle_nolock(struct clockdomain *clkdm) { - unsigned long flags; - if (!clkdm) return; @@ -868,11 +986,25 @@ void clkdm_deny_idle(struct clockdomain *clkdm) pr_debug("clockdomain: disabling automatic idle transitions for %s\n", clkdm->name); - spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_deny_idle(clkdm); - pwrdm_state_switch(clkdm->pwrdm.ptr); - spin_unlock_irqrestore(&clkdm->lock, flags); + pwrdm_state_switch_nolock(clkdm->pwrdm.ptr); +} + +/** + * clkdm_deny_idle - disable hwsup idle transitions for clkdm + * @clkdm: struct clockdomain * + * + * Prevent the hardware from automatically switching the clockdomain + * @clkdm into inactive or idle states. If the clockdomain has + * downstream clocks enabled in the clock framework, wkdep/sleepdep + * autodependencies are removed. No return value. + */ +void clkdm_deny_idle(struct clockdomain *clkdm) +{ + pwrdm_lock(clkdm->pwrdm.ptr); + clkdm_deny_idle_nolock(clkdm); + pwrdm_unlock(clkdm->pwrdm.ptr); } /** @@ -889,14 +1021,11 @@ void clkdm_deny_idle(struct clockdomain *clkdm) bool clkdm_in_hwsup(struct clockdomain *clkdm) { bool ret; - unsigned long flags; if (!clkdm) return false; - spin_lock_irqsave(&clkdm->lock, flags); ret = (clkdm->_flags & _CLKDM_FLAG_HWSUP_ENABLED) ? true : false; - spin_unlock_irqrestore(&clkdm->lock, flags); return ret; } @@ -918,30 +1047,91 @@ bool clkdm_missing_idle_reporting(struct clockdomain *clkdm) return (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) ? true : false; } +/* Public autodep handling functions (deprecated) */ + +/** + * clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable + * @clkdm: struct clockdomain * + * + * Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm' + * in hardware-supervised mode. Meant to be called from clock framework + * when a clock inside clockdomain 'clkdm' is enabled. No return value. + * + * XXX autodeps are deprecated and should be removed at the earliest + * opportunity + */ +void clkdm_add_autodeps(struct clockdomain *clkdm) +{ + struct clkdm_autodep *autodep; + + if (!autodeps || clkdm->flags & CLKDM_NO_AUTODEPS) + return; + + for (autodep = autodeps; autodep->clkdm.ptr; autodep++) { + if (IS_ERR(autodep->clkdm.ptr)) + continue; + + pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n", + clkdm->name, autodep->clkdm.ptr->name); + + _clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr); + _clkdm_add_wkdep(clkdm, autodep->clkdm.ptr); + } +} + +/** + * clkdm_del_autodeps - remove auto sleepdeps/wkdeps from clkdm + * @clkdm: struct clockdomain * + * + * Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm' + * in hardware-supervised mode. Meant to be called from clock framework + * when a clock inside clockdomain 'clkdm' is disabled. No return value. + * + * XXX autodeps are deprecated and should be removed at the earliest + * opportunity + */ +void clkdm_del_autodeps(struct clockdomain *clkdm) +{ + struct clkdm_autodep *autodep; + + if (!autodeps || clkdm->flags & CLKDM_NO_AUTODEPS) + return; + + for (autodep = autodeps; autodep->clkdm.ptr; autodep++) { + if (IS_ERR(autodep->clkdm.ptr)) + continue; + + pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n", + clkdm->name, autodep->clkdm.ptr->name); + + _clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr); + _clkdm_del_wkdep(clkdm, autodep->clkdm.ptr); + } +} + /* Clockdomain-to-clock/hwmod framework interface code */ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) { - unsigned long flags; - if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable) return -EINVAL; - spin_lock_irqsave(&clkdm->lock, flags); + pwrdm_lock(clkdm->pwrdm.ptr); /* * For arch's with no autodeps, clkcm_clk_enable * should be called for every clock instance or hwmod that is * enabled, so the clkdm can be force woken up. */ - if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) { - spin_unlock_irqrestore(&clkdm->lock, flags); + clkdm->usecount++; + if (clkdm->usecount > 1 && autodeps) { + pwrdm_unlock(clkdm->pwrdm.ptr); return 0; } arch_clkdm->clkdm_clk_enable(clkdm); - pwrdm_state_switch(clkdm->pwrdm.ptr); - spin_unlock_irqrestore(&clkdm->lock, flags); + pwrdm_state_switch_nolock(clkdm->pwrdm.ptr); + pwrdm_unlock(clkdm->pwrdm.ptr); pr_debug("clockdomain: %s: enabled\n", clkdm->name); @@ -990,36 +1180,34 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) */ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) { - unsigned long flags; - if (!clkdm || !clk || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) return -EINVAL; - spin_lock_irqsave(&clkdm->lock, flags); + pwrdm_lock(clkdm->pwrdm.ptr); /* corner case: disabling unused clocks */ - if ((__clk_get_enable_count(clk) == 0) && - (atomic_read(&clkdm->usecount) == 0)) + if ((__clk_get_enable_count(clk) == 0) && clkdm->usecount == 0) goto ccd_exit; - if (atomic_read(&clkdm->usecount) == 0) { - spin_unlock_irqrestore(&clkdm->lock, flags); + if (clkdm->usecount == 0) { + pwrdm_unlock(clkdm->pwrdm.ptr); WARN_ON(1); /* underflow */ return -ERANGE; } - if (atomic_dec_return(&clkdm->usecount) > 0) { - spin_unlock_irqrestore(&clkdm->lock, flags); + clkdm->usecount--; + if (clkdm->usecount > 0) { + pwrdm_unlock(clkdm->pwrdm.ptr); return 0; } arch_clkdm->clkdm_clk_disable(clkdm); - pwrdm_state_switch(clkdm->pwrdm.ptr); + pwrdm_state_switch_nolock(clkdm->pwrdm.ptr); pr_debug("clockdomain: %s: disabled\n", clkdm->name); ccd_exit: - spin_unlock_irqrestore(&clkdm->lock, flags); + pwrdm_unlock(clkdm->pwrdm.ptr); return 0; } @@ -1072,8 +1260,6 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh) */ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh) { - unsigned long flags; - /* The clkdm attribute does not exist yet prior OMAP4 */ if (cpu_is_omap24xx() || cpu_is_omap34xx()) return 0; @@ -1086,22 +1272,23 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh) if (!clkdm || !oh || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) return -EINVAL; - spin_lock_irqsave(&clkdm->lock, flags); + pwrdm_lock(clkdm->pwrdm.ptr); - if (atomic_read(&clkdm->usecount) == 0) { - spin_unlock_irqrestore(&clkdm->lock, flags); + if (clkdm->usecount == 0) { + pwrdm_unlock(clkdm->pwrdm.ptr); WARN_ON(1); /* underflow */ return -ERANGE; } - if (atomic_dec_return(&clkdm->usecount) > 0) { - spin_unlock_irqrestore(&clkdm->lock, flags); + clkdm->usecount--; + if (clkdm->usecount > 0) { + pwrdm_unlock(clkdm->pwrdm.ptr); return 0; } arch_clkdm->clkdm_clk_disable(clkdm); - pwrdm_state_switch(clkdm->pwrdm.ptr); - spin_unlock_irqrestore(&clkdm->lock, flags); + pwrdm_state_switch_nolock(clkdm->pwrdm.ptr); + pwrdm_unlock(clkdm->pwrdm.ptr); pr_debug("clockdomain: %s: disabled\n", clkdm->name); diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index bc42446..2da3765 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -15,7 +15,6 @@ #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H #include <linux/init.h> -#include <linux/spinlock.h> #include "powerdomain.h" #include "clock.h" @@ -92,8 +91,8 @@ struct clkdm_autodep { struct clkdm_dep { const char *clkdm_name; struct clockdomain *clkdm; - atomic_t wkdep_usecount; - atomic_t sleepdep_usecount; + s16 wkdep_usecount; + s16 sleepdep_usecount; }; /* Possible flags for struct clockdomain._flags */ @@ -137,9 +136,8 @@ struct clockdomain { const u16 clkdm_offs; struct clkdm_dep *wkdep_srcs; struct clkdm_dep *sleepdep_srcs; - atomic_t usecount; + int usecount; struct list_head node; - spinlock_t lock; }; /** @@ -196,12 +194,16 @@ int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2); int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2); int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm); +void clkdm_allow_idle_nolock(struct clockdomain *clkdm); void clkdm_allow_idle(struct clockdomain *clkdm); +void clkdm_deny_idle_nolock(struct clockdomain *clkdm); void clkdm_deny_idle(struct clockdomain *clkdm); bool clkdm_in_hwsup(struct clockdomain *clkdm); bool clkdm_missing_idle_reporting(struct clockdomain *clkdm); +int clkdm_wakeup_nolock(struct clockdomain *clkdm); int clkdm_wakeup(struct clockdomain *clkdm); +int clkdm_sleep_nolock(struct clockdomain *clkdm); int clkdm_sleep(struct clockdomain *clkdm); int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); @@ -214,8 +216,9 @@ extern void __init omap243x_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); extern void __init am33xx_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); -extern void _clkdm_add_autodeps(struct clockdomain *clkdm); -extern void _clkdm_del_autodeps(struct clockdomain *clkdm); + +extern void clkdm_add_autodeps(struct clockdomain *clkdm); +extern void clkdm_del_autodeps(struct clockdomain *clkdm); extern struct clkdm_ops omap2_clkdm_operations; extern struct clkdm_ops omap3_clkdm_operations; diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index db65069..6774a53 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -273,9 +273,6 @@ int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm) { - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_add_autodeps(clkdm); - omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); } @@ -284,9 +281,6 @@ static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm) { omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); - - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_del_autodeps(clkdm); } static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm) @@ -298,18 +292,8 @@ static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm) hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); - - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - _clkdm_add_autodeps(clkdm); - omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - } else { - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - omap2xxx_clkdm_wakeup(clkdm); - } + if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap2xxx_clkdm_wakeup(clkdm); return 0; } @@ -324,17 +308,8 @@ static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm) hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); - if (hwsup) { - /* Disable HW transitions when we are changing deps */ - omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - _clkdm_del_autodeps(clkdm); - omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, - clkdm->clktrctrl_mask); - } else { - if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) - omap2xxx_clkdm_sleep(clkdm); - } + if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap2xxx_clkdm_sleep(clkdm); return 0; } diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index c2086f2..9061c30 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -186,7 +186,7 @@ static int omap3xxx_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) continue; /* only happens if data is erroneous */ mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->sleepdep_usecount, 0); + cd->sleepdep_usecount = 0; } omap2_cm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, OMAP3430_CM_SLEEPDEP); @@ -209,8 +209,8 @@ static int omap3xxx_clkdm_wakeup(struct clockdomain *clkdm) static void omap3xxx_clkdm_allow_idle(struct clockdomain *clkdm) { - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_add_autodeps(clkdm); + if (clkdm->usecount > 0) + clkdm_add_autodeps(clkdm); omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -221,8 +221,8 @@ static void omap3xxx_clkdm_deny_idle(struct clockdomain *clkdm) omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); - if (atomic_read(&clkdm->usecount) > 0) - _clkdm_del_autodeps(clkdm); + if (clkdm->usecount > 0) + clkdm_del_autodeps(clkdm); } static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) @@ -250,7 +250,7 @@ static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) /* Disable HW transitions when we are changing deps */ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); - _clkdm_add_autodeps(clkdm); + clkdm_add_autodeps(clkdm); omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); } else { @@ -287,7 +287,7 @@ static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) /* Disable HW transitions when we are changing deps */ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); - _clkdm_del_autodeps(clkdm); + clkdm_del_autodeps(clkdm); omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); } else { diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 7f9a464..f0290f5 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -393,7 +393,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm) continue; /* only happens if data is erroneous */ mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->wkdep_usecount, 0); + cd->wkdep_usecount = 0; } omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition, diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 948bcaa..b435027 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -79,13 +79,13 @@ static inline int omap_mux_late_init(void) extern void omap2_init_common_infrastructure(void); -extern struct sys_timer omap2_timer; -extern struct sys_timer omap3_timer; -extern struct sys_timer omap3_secure_timer; -extern struct sys_timer omap3_gp_timer; -extern struct sys_timer omap3_am33xx_timer; -extern struct sys_timer omap4_timer; -extern struct sys_timer omap5_timer; +extern void omap2_sync32k_timer_init(void); +extern void omap3_sync32k_timer_init(void); +extern void omap3_secure_sync32k_timer_init(void); +extern void omap3_gp_gptimer_timer_init(void); +extern void omap3_am33xx_gptimer_timer_init(void); +extern void omap4_local_timer_init(void); +extern void omap5_realtime_timer_init(void); void omap2420_init_early(void); void omap2430_init_early(void); diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 22590db..80392fc 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -36,40 +36,66 @@ /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { - u32 mpu_state; - u32 core_state; + u8 mpu_state; + u8 core_state; + u8 per_min_state; + u8 flags; }; static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; +/* + * Possible flag bits for struct omap3_idle_statedata.flags: + * + * OMAP_CPUIDLE_CX_NO_CLKDM_IDLE: don't allow the MPU clockdomain to go + * inactive. This in turn prevents the MPU DPLL from entering autoidle + * mode, so wakeup latency is greatly reduced, at the cost of additional + * energy consumption. This also prevents the CORE clockdomain from + * entering idle. + */ +#define OMAP_CPUIDLE_CX_NO_CLKDM_IDLE BIT(0) + +/* + * Prevent PER OFF if CORE is not in RETention or OFF as this would + * disable PER wakeups completely. + */ static struct omap3_idle_statedata omap3_idle_data[] = { { .mpu_state = PWRDM_POWER_ON, .core_state = PWRDM_POWER_ON, + /* In C1 do not allow PER state lower than CORE state */ + .per_min_state = PWRDM_POWER_ON, + .flags = OMAP_CPUIDLE_CX_NO_CLKDM_IDLE, }, { .mpu_state = PWRDM_POWER_ON, .core_state = PWRDM_POWER_ON, + .per_min_state = PWRDM_POWER_RET, }, { .mpu_state = PWRDM_POWER_RET, .core_state = PWRDM_POWER_ON, + .per_min_state = PWRDM_POWER_RET, }, { .mpu_state = PWRDM_POWER_OFF, .core_state = PWRDM_POWER_ON, + .per_min_state = PWRDM_POWER_RET, }, { .mpu_state = PWRDM_POWER_RET, .core_state = PWRDM_POWER_RET, + .per_min_state = PWRDM_POWER_OFF, }, { .mpu_state = PWRDM_POWER_OFF, .core_state = PWRDM_POWER_RET, + .per_min_state = PWRDM_POWER_OFF, }, { .mpu_state = PWRDM_POWER_OFF, .core_state = PWRDM_POWER_OFF, + .per_min_state = PWRDM_POWER_OFF, }, }; @@ -80,27 +106,25 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, int index) { struct omap3_idle_statedata *cx = &omap3_idle_data[index]; - u32 mpu_state = cx->mpu_state, core_state = cx->core_state; local_fiq_disable(); - pwrdm_set_next_pwrst(mpu_pd, mpu_state); - pwrdm_set_next_pwrst(core_pd, core_state); - if (omap_irq_pending() || need_resched()) goto return_sleep_time; /* Deny idle for C1 */ - if (index == 0) { + if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE) { clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]); - clkdm_deny_idle(core_pd->pwrdm_clkdms[0]); + } else { + pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state); + pwrdm_set_next_pwrst(core_pd, cx->core_state); } /* * Call idle CPU PM enter notifier chain so that * VFP context is saved. */ - if (mpu_state == PWRDM_POWER_OFF) + if (cx->mpu_state == PWRDM_POWER_OFF) cpu_pm_enter(); /* Execute ARM wfi */ @@ -110,17 +134,15 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, * Call idle CPU PM enter notifier chain to restore * VFP context. */ - if (pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF) + if (cx->mpu_state == PWRDM_POWER_OFF && + pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF) cpu_pm_exit(); /* Re-allow idle for C1 */ - if (index == 0) { + if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE) clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]); - clkdm_allow_idle(core_pd->pwrdm_clkdms[0]); - } return_sleep_time: - local_fiq_enable(); return index; @@ -185,7 +207,7 @@ static int next_valid_state(struct cpuidle_device *dev, * Start search from the next (lower) state. */ for (idx = index - 1; idx >= 0; idx--) { - cx = &omap3_idle_data[idx]; + cx = &omap3_idle_data[idx]; if ((cx->mpu_state >= mpu_deepest_state) && (cx->core_state >= core_deepest_state)) { next_index = idx; @@ -209,10 +231,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - int new_state_idx; - u32 core_next_state, per_next_state = 0, per_saved_state = 0; + int new_state_idx, ret; + u8 per_next_state, per_saved_state; struct omap3_idle_statedata *cx; - int ret; /* * Use only C1 if CAM is active. @@ -233,25 +254,13 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, /* Program PER state */ cx = &omap3_idle_data[new_state_idx]; - core_next_state = cx->core_state; - per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); - if (new_state_idx == 0) { - /* In C1 do not allow PER state lower than CORE state */ - if (per_next_state < core_next_state) - per_next_state = core_next_state; - } else { - /* - * Prevent PER OFF if CORE is not in RETention or OFF as this - * would disable PER wakeups completely. - */ - if ((per_next_state == PWRDM_POWER_OFF) && - (core_next_state > PWRDM_POWER_RET)) - per_next_state = PWRDM_POWER_RET; - } - /* Are we changing PER target state? */ - if (per_next_state != per_saved_state) + per_next_state = pwrdm_read_next_pwrst(per_pd); + per_saved_state = per_next_state; + if (per_next_state < cx->per_min_state) { + per_next_state = cx->per_min_state; pwrdm_set_next_pwrst(per_pd, per_next_state); + } ret = omap3_enter_idle(dev, drv, new_state_idx); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 626f3ea..142d9c6 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -20,6 +20,7 @@ #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> #include <linux/platform_data/omap_ocp2scp.h> +#include <linux/usb/omap_control_usb.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -61,14 +62,13 @@ static int __init omap3_l3_init(void) if (!oh) pr_err("could not look up %s\n", oh_name); - pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0, - NULL, 0, 0); + pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0); WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); return IS_ERR(pdev) ? PTR_ERR(pdev) : 0; } -postcore_initcall(omap3_l3_init); +omap_postcore_initcall(omap3_l3_init); static int __init omap4_l3_init(void) { @@ -96,14 +96,13 @@ static int __init omap4_l3_init(void) pr_err("could not look up %s\n", oh_name); } - pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, - 0, NULL, 0, 0); + pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, 0); WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); return IS_ERR(pdev) ? PTR_ERR(pdev) : 0; } -postcore_initcall(omap4_l3_init); +omap_postcore_initcall(omap4_l3_init); #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -254,6 +253,49 @@ static inline void omap_init_camera(void) #endif } +#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB) +static struct omap_control_usb_platform_data omap4_control_usb_pdata = { + .type = 1, +}; + +struct resource omap4_control_usb_res[] = { + { + .name = "control_dev_conf", + .start = 0x4a002300, + .end = 0x4a002303, + .flags = IORESOURCE_MEM, + }, + { + .name = "otghs_control", + .start = 0x4a00233c, + .end = 0x4a00233f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap4_control_usb = { + .name = "omap-control-usb", + .id = -1, + .dev = { + .platform_data = &omap4_control_usb_pdata, + }, + .num_resources = 2, + .resource = omap4_control_usb_res, +}; + +static inline void __init omap_init_control_usb(void) +{ + if (!cpu_is_omap44xx()) + return; + + if (platform_device_register(&omap4_control_usb)) + pr_err("Error registering omap_control_usb device\n"); +} + +#else +static inline void omap_init_control_usb(void) { } +#endif /* CONFIG_OMAP_CONTROL_USB */ + int __init omap4_keyboard_init(struct omap4_keypad_platform_data *sdp4430_keypad_data, struct omap_board_data *bdata) { @@ -273,7 +315,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data keypad_data = sdp4430_keypad_data; pdev = omap_device_build(name, id, oh, keypad_data, - sizeof(struct omap4_keypad_platform_data), NULL, 0, 0); + sizeof(struct omap4_keypad_platform_data)); if (IS_ERR(pdev)) { WARN(1, "Can't build omap_device for %s:%s.\n", @@ -297,7 +339,7 @@ static inline void __init omap_init_mbox(void) return; } - pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0); + pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0); WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", __func__, PTR_ERR(pdev)); } @@ -337,7 +379,7 @@ static void __init omap_init_mcpdm(void) return; } - pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, NULL, 0, 0); + pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0); WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n"); } #else @@ -358,7 +400,7 @@ static void __init omap_init_dmic(void) return; } - pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0, NULL, 0, 0); + pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0); WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n"); } #else @@ -384,8 +426,7 @@ static void __init omap_init_hdmi_audio(void) return; } - pdev = omap_device_build("omap-hdmi-audio-dai", - -1, oh, NULL, 0, NULL, 0, 0); + pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0, 0); WARN(IS_ERR(pdev), "Can't build omap_device for omap-hdmi-audio-dai.\n"); @@ -429,8 +470,7 @@ static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused) } spi_num++; - pdev = omap_device_build(name, spi_num, oh, pdata, - sizeof(*pdata), NULL, 0, 0); + pdev = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata)); WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n", name, oh->name); kfree(pdata); @@ -460,7 +500,7 @@ static void omap_init_rng(void) if (!oh) return; - pdev = omap_device_build("omap_rng", -1, oh, NULL, 0, NULL, 0, 0); + pdev = omap_device_build("omap_rng", -1, oh, NULL, 0); WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n"); } @@ -689,8 +729,7 @@ static void __init omap_init_ocp2scp(void) pdata->dev_cnt = dev_cnt; - pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL, - 0, false); + pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata)); if (IS_ERR(pdev)) { pr_err("Could not build omap_device for %s %s\n", name, oh_name); @@ -721,6 +760,7 @@ static int __init omap2_init_devices(void) omap_init_mbox(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { + omap_init_control_usb(); omap_init_dmic(); omap_init_mcpdm(); omap_init_mcspi(); @@ -734,4 +774,4 @@ static int __init omap2_init_devices(void) return 0; } -arch_initcall(omap2_init_devices); +omap_arch_initcall(omap2_init_devices); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index cc75aaf..ff37be1 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -226,7 +226,7 @@ static struct platform_device *create_dss_pdev(const char *pdev_name, dev_set_name(&pdev->dev, "%s", pdev->name); ohs[0] = oh; - od = omap_device_alloc(pdev, ohs, 1, NULL, 0); + od = omap_device_alloc(pdev, ohs, 1); if (IS_ERR(od)) { pr_err("Could not alloc omap_device for %s\n", pdev_name); r = -ENOMEM; diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 612b982..dab9fc0 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -27,7 +27,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/device.h> - +#include <linux/dma-mapping.h> #include <linux/omap-dma.h> #include "soc.h" @@ -248,7 +248,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) p->errata = configure_dma_errata(); - pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0); + pdev = omap_device_build(name, 0, oh, p, sizeof(*p)); kfree(p); if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s:%s.\n", @@ -288,9 +288,26 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) return 0; } +static const struct platform_device_info omap_dma_dev_info = { + .name = "omap-dma-engine", + .id = -1, + .dma_mask = DMA_BIT_MASK(32), +}; + static int __init omap2_system_dma_init(void) { - return omap_hwmod_for_each_by_class("dma", + struct platform_device *pdev; + int res; + + res = omap_hwmod_for_each_by_class("dma", omap2_system_dma_init_dev, NULL); + if (res) + return res; + + pdev = platform_device_register_full(&omap_dma_dev_info); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return res; } -arch_initcall(omap2_system_dma_init); +omap_arch_initcall(omap2_system_dma_init); diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 2a2cfa8..59a4af7 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -51,8 +51,7 @@ static int __init omap_init_drm(void) oh = omap_hwmod_lookup("dmm"); if (oh) { - pdev = omap_device_build(oh->name, -1, oh, NULL, 0, NULL, 0, - false); + pdev = omap_device_build(oh->name, -1, oh, NULL, 0); WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", oh->name); } @@ -63,6 +62,6 @@ static int __init omap_init_drm(void) } -arch_initcall(omap_init_drm); +omap_arch_initcall(omap_init_drm); #endif diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c index b3566f6..cbeaca2 100644 --- a/arch/arm/mach-omap2/emu.c +++ b/arch/arm/mach-omap2/emu.c @@ -47,4 +47,4 @@ static int __init emu_init(void) return 0; } -subsys_initcall(emu_init); +omap_subsys_initcall(emu_init); diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c index d9bd965..190ae49 100644 --- a/arch/arm/mach-omap2/fb.c +++ b/arch/arm/mach-omap2/fb.c @@ -89,7 +89,7 @@ static int __init omap_init_vrfb(void) return 0; } -arch_initcall(omap_init_vrfb); +omap_arch_initcall(omap_init_vrfb); #endif #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) @@ -113,6 +113,6 @@ static int __init omap_init_fb(void) return platform_device_register(&omap_fb_device); } -arch_initcall(omap_init_fb); +omap_arch_initcall(omap_init_fb); #endif diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 399acab..7a57714 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -23,6 +23,7 @@ #include <linux/of.h> #include <linux/platform_data/gpio-omap.h> +#include "soc.h" #include "omap_hwmod.h" #include "omap_device.h" #include "omap-pm.h" @@ -131,8 +132,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pwrdm = omap_hwmod_get_pwrdm(oh); pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); - pdev = omap_device_build(name, id - 1, oh, pdata, - sizeof(*pdata), NULL, 0, false); + pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata)); kfree(pdata); if (IS_ERR(pdev)) { @@ -147,7 +147,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) /* * gpio_init needs to be done before * machine_init functions access gpio APIs. - * Hence gpio_init is a postcore_initcall. + * Hence gpio_init is a omap_postcore_initcall. */ static int __init omap2_gpio_init(void) { @@ -157,4 +157,4 @@ static int __init omap2_gpio_init(void) return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL); } -postcore_initcall(omap2_gpio_init); +omap_postcore_initcall(omap2_gpio_init); diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index db969a5..afc1e8c 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -89,20 +89,21 @@ static int omap2_nand_gpmc_retime( return 0; } -static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) +static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) { /* support only OMAP3 class */ - if (!cpu_is_omap34xx()) { + if (!cpu_is_omap34xx() && !soc_is_am33xx()) { pr_err("BCH ecc is not supported on this CPU\n"); return 0; } /* - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. - * Other chips may be added if confirmed to work. + * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1 + * and AM33xx derivates. Other chips may be added if confirmed to work. */ if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) && - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { + (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)) && + (!soc_is_am33xx())) { pr_err("BCH 4-bit mode is not supported on this CPU\n"); return 0; } @@ -110,8 +111,8 @@ static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) return 1; } -int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, - struct gpmc_timings *gpmc_t) +int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { int err = 0; struct device *dev = &gpmc_nand_device.dev; diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 94a349e..fadd8743 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -356,7 +356,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) return ret; } -void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) +void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) { int err; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8033cb7..e4b16c8 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -25,6 +25,10 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_mtd.h> +#include <linux/of_device.h> +#include <linux/mtd/nand.h> #include <linux/platform_data/mtd-nand-omap2.h> @@ -34,6 +38,8 @@ #include "common.h" #include "omap_device.h" #include "gpmc.h" +#include "gpmc-nand.h" +#include "gpmc-onenand.h" #define DEVICE_NAME "omap-gpmc" @@ -145,7 +151,8 @@ static unsigned gpmc_irq_start; static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); -static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ +/* Define chip-selects as reserved by default until probe completes */ +static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1); static struct device *gpmc_dev; static int gpmc_irq; static resource_size_t phys_base, mem_size; @@ -783,9 +790,6 @@ static int gpmc_mem_init(void) * even if we didn't boot from ROM. */ boot_rom_space = BOOT_ROM_SPACE; - /* In apollon the CS0 is mapped as 0x0000 0000 */ - if (machine_is_omap_apollon()) - boot_rom_space = 0; gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space; gpmc_mem_root.end = GPMC_MEM_END; @@ -1118,8 +1122,215 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, /* TODO: remove, see function definition */ gpmc_convert_ps_to_ns(gpmc_t); + /* Now the GPMC is initialised, unreserve the chip-selects */ + gpmc_cs_map = 0; + + return 0; +} + +#ifdef CONFIG_OF +static struct of_device_id gpmc_dt_ids[] = { + { .compatible = "ti,omap2420-gpmc" }, + { .compatible = "ti,omap2430-gpmc" }, + { .compatible = "ti,omap3430-gpmc" }, /* omap3430 & omap3630 */ + { .compatible = "ti,omap4430-gpmc" }, /* omap4430 & omap4460 & omap543x */ + { .compatible = "ti,am3352-gpmc" }, /* am335x devices */ + { } +}; +MODULE_DEVICE_TABLE(of, gpmc_dt_ids); + +static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, + struct gpmc_timings *gpmc_t) +{ + u32 val; + + memset(gpmc_t, 0, sizeof(*gpmc_t)); + + /* minimum clock period for syncronous mode */ + if (!of_property_read_u32(np, "gpmc,sync-clk", &val)) + gpmc_t->sync_clk = val; + + /* chip select timtings */ + if (!of_property_read_u32(np, "gpmc,cs-on", &val)) + gpmc_t->cs_on = val; + + if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val)) + gpmc_t->cs_rd_off = val; + + if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val)) + gpmc_t->cs_wr_off = val; + + /* ADV signal timings */ + if (!of_property_read_u32(np, "gpmc,adv-on", &val)) + gpmc_t->adv_on = val; + + if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val)) + gpmc_t->adv_rd_off = val; + + if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val)) + gpmc_t->adv_wr_off = val; + + /* WE signal timings */ + if (!of_property_read_u32(np, "gpmc,we-on", &val)) + gpmc_t->we_on = val; + + if (!of_property_read_u32(np, "gpmc,we-off", &val)) + gpmc_t->we_off = val; + + /* OE signal timings */ + if (!of_property_read_u32(np, "gpmc,oe-on", &val)) + gpmc_t->oe_on = val; + + if (!of_property_read_u32(np, "gpmc,oe-off", &val)) + gpmc_t->oe_off = val; + + /* access and cycle timings */ + if (!of_property_read_u32(np, "gpmc,page-burst-access", &val)) + gpmc_t->page_burst_access = val; + + if (!of_property_read_u32(np, "gpmc,access", &val)) + gpmc_t->access = val; + + if (!of_property_read_u32(np, "gpmc,rd-cycle", &val)) + gpmc_t->rd_cycle = val; + + if (!of_property_read_u32(np, "gpmc,wr-cycle", &val)) + gpmc_t->wr_cycle = val; + + /* only for OMAP3430 */ + if (!of_property_read_u32(np, "gpmc,wr-access", &val)) + gpmc_t->wr_access = val; + + if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val)) + gpmc_t->wr_data_mux_bus = val; +} + +#ifdef CONFIG_MTD_NAND + +static const char * const nand_ecc_opts[] = { + [OMAP_ECC_HAMMING_CODE_DEFAULT] = "sw", + [OMAP_ECC_HAMMING_CODE_HW] = "hw", + [OMAP_ECC_HAMMING_CODE_HW_ROMCODE] = "hw-romcode", + [OMAP_ECC_BCH4_CODE_HW] = "bch4", + [OMAP_ECC_BCH8_CODE_HW] = "bch8", +}; + +static int gpmc_probe_nand_child(struct platform_device *pdev, + struct device_node *child) +{ + u32 val; + const char *s; + struct gpmc_timings gpmc_t; + struct omap_nand_platform_data *gpmc_nand_data; + + if (of_property_read_u32(child, "reg", &val) < 0) { + dev_err(&pdev->dev, "%s has no 'reg' property\n", + child->full_name); + return -ENODEV; + } + + gpmc_nand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_nand_data), + GFP_KERNEL); + if (!gpmc_nand_data) + return -ENOMEM; + + gpmc_nand_data->cs = val; + gpmc_nand_data->of_node = child; + + if (!of_property_read_string(child, "ti,nand-ecc-opt", &s)) + for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++) + if (!strcasecmp(s, nand_ecc_opts[val])) { + gpmc_nand_data->ecc_opt = val; + break; + } + + val = of_get_nand_bus_width(child); + if (val == 16) + gpmc_nand_data->devsize = NAND_BUSWIDTH_16; + + gpmc_read_timings_dt(child, &gpmc_t); + gpmc_nand_init(gpmc_nand_data, &gpmc_t); + + return 0; +} +#else +static int gpmc_probe_nand_child(struct platform_device *pdev, + struct device_node *child) +{ return 0; } +#endif + +#ifdef CONFIG_MTD_ONENAND +static int gpmc_probe_onenand_child(struct platform_device *pdev, + struct device_node *child) +{ + u32 val; + struct omap_onenand_platform_data *gpmc_onenand_data; + + if (of_property_read_u32(child, "reg", &val) < 0) { + dev_err(&pdev->dev, "%s has no 'reg' property\n", + child->full_name); + return -ENODEV; + } + + gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data), + GFP_KERNEL); + if (!gpmc_onenand_data) + return -ENOMEM; + + gpmc_onenand_data->cs = val; + gpmc_onenand_data->of_node = child; + gpmc_onenand_data->dma_channel = -1; + + if (!of_property_read_u32(child, "dma-channel", &val)) + gpmc_onenand_data->dma_channel = val; + + gpmc_onenand_init(gpmc_onenand_data); + + return 0; +} +#else +static int gpmc_probe_onenand_child(struct platform_device *pdev, + struct device_node *child) +{ + return 0; +} +#endif + +static int gpmc_probe_dt(struct platform_device *pdev) +{ + int ret; + struct device_node *child; + const struct of_device_id *of_id = + of_match_device(gpmc_dt_ids, &pdev->dev); + + if (!of_id) + return 0; + + for_each_node_by_name(child, "nand") { + ret = gpmc_probe_nand_child(pdev, child); + if (ret < 0) { + of_node_put(child); + return ret; + } + } + + for_each_node_by_name(child, "onenand") { + ret = gpmc_probe_onenand_child(pdev, child); + if (ret < 0) { + of_node_put(child); + return ret; + } + } + return 0; +} +#else +static int gpmc_probe_dt(struct platform_device *pdev) +{ + return 0; +} +#endif static int gpmc_probe(struct platform_device *pdev) { @@ -1134,11 +1345,9 @@ static int gpmc_probe(struct platform_device *pdev) phys_base = res->start; mem_size = resource_size(res); - gpmc_base = devm_request_and_ioremap(&pdev->dev, res); - if (!gpmc_base) { - dev_err(&pdev->dev, "error: request memory / ioremap\n"); - return -EADDRNOTAVAIL; - } + gpmc_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(gpmc_base)) + return PTR_ERR(gpmc_base); res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) @@ -1174,6 +1383,14 @@ static int gpmc_probe(struct platform_device *pdev) if (IS_ERR_VALUE(gpmc_setup_irq())) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); + rc = gpmc_probe_dt(pdev); + if (rc < 0) { + clk_disable_unprepare(gpmc_l3_clk); + clk_put(gpmc_l3_clk); + dev_err(gpmc_dev, "failed to probe DT parameters\n"); + return rc; + } + return 0; } @@ -1191,6 +1408,7 @@ static struct platform_driver gpmc_driver = { .driver = { .name = DEVICE_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(gpmc_dt_ids), }, }; @@ -1205,7 +1423,7 @@ static __exit void gpmc_exit(void) } -postcore_initcall(gpmc_init); +omap_postcore_initcall(gpmc_init); module_exit(gpmc_exit); static int __init omap_gpmc_init(void) @@ -1214,18 +1432,25 @@ static int __init omap_gpmc_init(void) struct platform_device *pdev; char *oh_name = "gpmc"; + /* + * if the board boots up with a populated DT, do not + * manually add the device from this initcall + */ + if (of_have_populated_dt()) + return -ENODEV; + oh = omap_hwmod_lookup(oh_name); if (!oh) { pr_err("Could not look up %s\n", oh_name); return -ENODEV; } - pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0, NULL, 0, 0); + pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0); WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); return IS_ERR(pdev) ? PTR_ERR(pdev) : 0; } -postcore_initcall(omap_gpmc_init); +omap_postcore_initcall(omap_gpmc_init); static irqreturn_t gpmc_handle_irq(int irq, void *dev) { diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index ab7bf18..cbc8e3c 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -27,6 +27,7 @@ #include <linux/err.h> #include <linux/platform_device.h> +#include "soc.h" #include "omap_hwmod.h" #include "omap_device.h" #include "hdq1w.h" @@ -87,10 +88,10 @@ static int __init omap_init_hdq(void) if (!oh) return 0; - pdev = omap_device_build(devname, id, oh, NULL, 0, NULL, 0, 0); + pdev = omap_device_build(devname, id, oh, NULL, 0); WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", devname, oh->name); return 0; } -arch_initcall(omap_init_hdq); +omap_arch_initcall(omap_init_hdq); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 4a96433..2ef1f87 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -522,7 +522,7 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, } dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); - od = omap_device_alloc(pdev, ohs, 1, NULL, 0); + od = omap_device_alloc(pdev, ohs, 1); if (IS_ERR(od)) { pr_err("Could not allocate od for %s\n", name); goto put_pdev; diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c index 1df9b5f..ef175ac 100644 --- a/arch/arm/mach-omap2/hwspinlock.c +++ b/arch/arm/mach-omap2/hwspinlock.c @@ -21,6 +21,7 @@ #include <linux/err.h> #include <linux/hwspinlock.h> +#include "soc.h" #include "omap_hwmod.h" #include "omap_device.h" @@ -46,8 +47,7 @@ static int __init hwspinlocks_init(void) return -EINVAL; pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata, - sizeof(struct hwspinlock_pdata), - NULL, 0, false); + sizeof(struct hwspinlock_pdata)); if (IS_ERR(pdev)) { pr_err("Can't build omap_device for %s:%s\n", dev_name, oh_name); @@ -57,4 +57,4 @@ static int __init hwspinlocks_init(void) return retval; } /* early board code might need to reserve specific hwspinlock instances */ -postcore_initcall(hwspinlocks_init); +omap_postcore_initcall(hwspinlocks_init); diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index b9074dd..d940e53 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -178,10 +178,14 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, if (cpu_is_omap34xx()) pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; pdev = omap_device_build(name, bus_id, oh, pdata, - sizeof(struct omap_i2c_bus_platform_data), - NULL, 0, 0); + sizeof(struct omap_i2c_bus_platform_data)); WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); return PTR_RET(pdev); } +static int __init omap_i2c_cmdline(void) +{ + return omap_register_i2c_bus_cmdline(); +} +omap_subsys_initcall(omap_i2c_cmdline); diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h index 70eda00..7ca1fcf 100644 --- a/arch/arm/mach-omap2/include/mach/serial.h +++ b/arch/arm/mach-omap2/include/mach/serial.h @@ -8,20 +8,6 @@ * GNU General Public License for more details. */ -/* - * Memory entry used for the DEBUG_LL UART configuration, relative to - * start of RAM. See also uncompress.h and debug-macro.S. - * - * Note that using a memory location for storing the UART configuration - * has at least two limitations: - * - * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the - * uncompress code could then partially overwrite itself - * 2. We assume printascii is called at least once before paging_init, - * and addruart has a chance to read OMAP_UART_INFO - */ -#define OMAP_UART_INFO_OFS 0x3ffc - /* OMAP2 serial ports */ #define OMAP2_UART1_BASE 0x4806a000 #define OMAP2_UART2_BASE 0x4806c000 @@ -68,29 +54,6 @@ #define OMAP24XX_BASE_BAUD (48000000/16) -/* - * DEBUG_LL port encoding stored into the UART1 scratchpad register by - * decomp_setup in uncompress.h - */ -#define OMAP2UART1 21 -#define OMAP2UART2 22 -#define OMAP2UART3 23 -#define OMAP3UART1 OMAP2UART1 -#define OMAP3UART2 OMAP2UART2 -#define OMAP3UART3 33 -#define OMAP3UART4 34 /* Only on 36xx */ -#define OMAP4UART1 OMAP2UART1 -#define OMAP4UART2 OMAP2UART2 -#define OMAP4UART3 43 -#define OMAP4UART4 44 -#define TI81XXUART1 81 -#define TI81XXUART2 82 -#define TI81XXUART3 83 -#define AM33XXUART1 84 -#define OMAP5UART3 OMAP4UART3 -#define OMAP5UART4 OMAP4UART4 -#define ZOOM_UART 95 /* Only on zoom2/3 */ - #ifndef __ASSEMBLER__ struct omap_board_data; diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h deleted file mode 100644 index 8e3546d..0000000 --- a/arch/arm/mach-omap2/include/mach/uncompress.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Rewritten by: - * Author: <source@mvista.com> - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include <asm/memory.h> -#include <asm/mach-types.h> - -#include <mach/serial.h> - -#define MDR1_MODE_MASK 0x07 - -volatile u8 *uart_base; -int uart_shift; - -/* - * Store the DEBUG_LL uart number into memory. - * See also debug-macro.S, and serial.c for related code. - */ -static void set_omap_uart_info(unsigned char port) -{ - /* - * Get address of some.bss variable and round it down - * a la CONFIG_AUTO_ZRELADDR. - */ - u32 ram_start = (u32)&uart_shift & 0xf8000000; - u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS); - *uart_info = port; -} - -static void putc(int c) -{ - if (!uart_base) - return; - - /* Check for UART 16x mode */ - if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) - return; - - while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) - barrier(); - uart_base[UART_TX << uart_shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * Macros to configure UART1 and debug UART - */ -#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \ - if (machine_is_##mach()) { \ - uart_base = (volatile u8 *)(dbg_uart); \ - uart_shift = (dbg_shft); \ - port = (dbg_id); \ - set_omap_uart_info(port); \ - break; \ - } - -#define DEBUG_LL_OMAP2(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP2UART##p) - -#define DEBUG_LL_OMAP3(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP3UART##p) - -#define DEBUG_LL_OMAP4(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP4UART##p) - -#define DEBUG_LL_OMAP5(p, mach) \ - _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \ - OMAP5UART##p) -/* Zoom2/3 shift is different for UART1 and external port */ -#define DEBUG_LL_ZOOM(mach) \ - _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART) - -#define DEBUG_LL_TI81XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - TI81XXUART##p) - -#define DEBUG_LL_AM33XX(p, mach) \ - _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ - AM33XXUART##p) - -static inline void arch_decomp_setup(void) -{ - int port = 0; - - /* - * Initialize the port based on the machine ID from the bootloader. - * Note that we're using macros here instead of switch statement - * as machine_is functions are optimized out for the boards that - * are not selected. - */ - do { - /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap_2430sdp); - DEBUG_LL_OMAP2(1, omap_apollon); - DEBUG_LL_OMAP2(1, omap_h4); - - /* omap2 based boards using UART3 */ - DEBUG_LL_OMAP2(3, nokia_n800); - DEBUG_LL_OMAP2(3, nokia_n810); - DEBUG_LL_OMAP2(3, nokia_n810_wimax); - - /* omap3 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap3evm); - DEBUG_LL_OMAP3(1, omap_3430sdp); - DEBUG_LL_OMAP3(1, omap_3630sdp); - DEBUG_LL_OMAP3(1, omap3530_lv_som); - DEBUG_LL_OMAP3(1, omap3_torpedo); - - /* omap3 based boards using UART3 */ - DEBUG_LL_OMAP3(3, cm_t35); - DEBUG_LL_OMAP3(3, cm_t3517); - DEBUG_LL_OMAP3(3, cm_t3730); - DEBUG_LL_OMAP3(3, craneboard); - DEBUG_LL_OMAP3(3, devkit8000); - DEBUG_LL_OMAP3(3, igep0020); - DEBUG_LL_OMAP3(3, igep0030); - DEBUG_LL_OMAP3(3, nokia_rm680); - DEBUG_LL_OMAP3(3, nokia_rm696); - DEBUG_LL_OMAP3(3, nokia_rx51); - DEBUG_LL_OMAP3(3, omap3517evm); - DEBUG_LL_OMAP3(3, omap3_beagle); - DEBUG_LL_OMAP3(3, omap3_pandora); - DEBUG_LL_OMAP3(3, omap_ldp); - DEBUG_LL_OMAP3(3, overo); - DEBUG_LL_OMAP3(3, touchbook); - - /* omap4 based boards using UART3 */ - DEBUG_LL_OMAP4(3, omap_4430sdp); - DEBUG_LL_OMAP4(3, omap4_panda); - - /* omap5 based boards using UART3 */ - DEBUG_LL_OMAP5(3, omap5_sevm); - - /* zoom2/3 external uart */ - DEBUG_LL_ZOOM(omap_zoom2); - DEBUG_LL_ZOOM(omap_zoom3); - - /* TI8168 base boards using UART3 */ - DEBUG_LL_TI81XX(3, ti8168evm); - - /* TI8148 base boards using UART1 */ - DEBUG_LL_TI81XX(1, ti8148evm); - - /* AM33XX base boards using UART1 */ - DEBUG_LL_AM33XX(1, am335xevm); - } while (0); -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index df49f2a..5d87680 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -23,6 +23,7 @@ #include <linux/omap-dma.h> +#include "soc.h" #include "omap_device.h" /* @@ -101,7 +102,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) count++; } pdev = omap_device_build_ss(name, id, oh_device, count, pdata, - sizeof(*pdata), NULL, 0, false); + sizeof(*pdata)); kfree(pdata); if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, @@ -118,4 +119,4 @@ static int __init omap2_mcbsp_init(void) return 0; } -arch_initcall(omap2_mcbsp_init); +omap_arch_initcall(omap2_mcbsp_init); diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index aafdd4c..c52d8b4 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -150,7 +150,7 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) return; } pdev = omap_device_build(dev_name, id, oh, mmc_data[0], - sizeof(struct omap_mmc_platform_data), NULL, 0, 0); + sizeof(struct omap_mmc_platform_data)); if (IS_ERR(pdev)) WARN(1, "Can'd build omap_device for %s:%s.\n", dev_name, oh->name); diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index 6da4f7a..f6daae8 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/platform_data/iommu-omap.h> +#include "soc.h" #include "omap_hwmod.h" #include "omap_device.h" @@ -41,8 +42,7 @@ static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused) pdata->deassert_reset = omap_device_deassert_hardreset; } - pdev = omap_device_build("omap-iommu", i, oh, pdata, sizeof(*pdata), - NULL, 0, 0); + pdev = omap_device_build("omap-iommu", i, oh, pdata, sizeof(*pdata)); kfree(pdata); @@ -61,7 +61,7 @@ static int __init omap_iommu_init(void) return omap_hwmod_for_each_by_class("mmu", omap_iommu_dev_init, NULL); } /* must be ready before omap3isp is probed */ -subsys_initcall(omap_iommu_init); +omap_subsys_initcall(omap_iommu_init); static void __exit omap_iommu_exit(void) { diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index aac46bf..8bcb64b 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -87,37 +87,6 @@ static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr) } /* - * Set the CPUx powerdomain's previous power state - */ -static inline void set_cpu_next_pwrst(unsigned int cpu_id, - unsigned int power_state) -{ - struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - - pwrdm_set_next_pwrst(pm_info->pwrdm, power_state); -} - -/* - * Read CPU's previous power state - */ -static inline unsigned int read_cpu_prev_pwrst(unsigned int cpu_id) -{ - struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - - return pwrdm_read_prev_pwrst(pm_info->pwrdm); -} - -/* - * Clear the CPUx powerdomain's previous power state - */ -static inline void clear_cpu_prev_pwrst(unsigned int cpu_id) -{ - struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - - pwrdm_clear_all_prev_pwrst(pm_info->pwrdm); -} - -/* * Store the SCU power status value to scratchpad memory */ static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state) @@ -230,6 +199,7 @@ static void save_l2x0_context(void) */ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) { + struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); unsigned int save_state = 0; unsigned int wakeup_cpu; @@ -268,7 +238,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) save_state = 2; cpu_clear_prev_logic_pwrst(cpu); - set_cpu_next_pwrst(cpu, power_state); + pwrdm_set_next_pwrst(pm_info->pwrdm, power_state); set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume)); scu_pwrst_prepare(cpu, power_state); l2x0_pwrst_prepare(cpu, save_state); @@ -286,7 +256,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * domain transition */ wakeup_cpu = smp_processor_id(); - set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON); + pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); pwrdm_post_transition(NULL); @@ -300,8 +270,8 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) */ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { - unsigned int cpu_state = 0; struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); + unsigned int cpu_state = 0; if (omap_rev() == OMAP4430_REV_ES1_0) return -ENXIO; @@ -309,8 +279,8 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) if (power_state == PWRDM_POWER_OFF) cpu_state = 1; - clear_cpu_prev_pwrst(cpu); - set_cpu_next_pwrst(cpu, power_state); + pwrdm_clear_all_prev_pwrst(pm_info->pwrdm); + pwrdm_set_next_pwrst(pm_info->pwrdm, power_state); set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup)); scu_pwrst_prepare(cpu, power_state); @@ -321,7 +291,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) */ omap4_finish_suspend(cpu_state); - set_cpu_next_pwrst(cpu, PWRDM_POWER_ON); + pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON); return 0; } diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index cd42d92..d972721 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -19,9 +19,9 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> -#include <asm/hardware/gic.h> #include <asm/smp_scu.h> #include "omap-secure.h" @@ -157,7 +157,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct * booted = true; } - gic_raise_softirq(cpumask_of(cpu), 0); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); /* * Now the secondary core is starting up let it run its @@ -215,7 +215,7 @@ static void __init omap4_smp_init_cpus(void) * Currently we can't call ioremap here because * SoC detection won't work until after init_early. */ - scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE); + scu_base = OMAP2_L4_IO_ADDRESS(scu_a9_get_base()); BUG_ON(!scu_base); ncores = scu_get_core_count(scu_base); } else if (cpu_id == CPU_CORTEX_A15) { @@ -231,8 +231,6 @@ static void __init omap4_smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 5d3b4f4..f8bb3b9 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -24,8 +24,7 @@ #include <linux/cpu.h> #include <linux/notifier.h> #include <linux/cpu_pm.h> - -#include <asm/hardware/gic.h> +#include <linux/irqchip/arm-gic.h> #include "omap-wakeupgen.h" #include "omap-secure.h" @@ -46,7 +45,7 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; -static DEFINE_SPINLOCK(wakeupgen_lock); +static DEFINE_RAW_SPINLOCK(wakeupgen_lock); static unsigned int irq_target_cpu[MAX_IRQS]; static unsigned int irq_banks = MAX_NR_REG_BANKS; static unsigned int max_irqs = MAX_IRQS; @@ -134,9 +133,9 @@ static void wakeupgen_mask(struct irq_data *d) { unsigned long flags; - spin_lock_irqsave(&wakeupgen_lock, flags); + raw_spin_lock_irqsave(&wakeupgen_lock, flags); _wakeupgen_clear(d->irq, irq_target_cpu[d->irq]); - spin_unlock_irqrestore(&wakeupgen_lock, flags); + raw_spin_unlock_irqrestore(&wakeupgen_lock, flags); } /* @@ -146,9 +145,9 @@ static void wakeupgen_unmask(struct irq_data *d) { unsigned long flags; - spin_lock_irqsave(&wakeupgen_lock, flags); + raw_spin_lock_irqsave(&wakeupgen_lock, flags); _wakeupgen_set(d->irq, irq_target_cpu[d->irq]); - spin_unlock_irqrestore(&wakeupgen_lock, flags); + raw_spin_unlock_irqrestore(&wakeupgen_lock, flags); } #ifdef CONFIG_HOTPLUG_CPU @@ -189,7 +188,7 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set) { unsigned long flags; - spin_lock_irqsave(&wakeupgen_lock, flags); + raw_spin_lock_irqsave(&wakeupgen_lock, flags); if (set) { _wakeupgen_save_masks(cpu); _wakeupgen_set_all(cpu, WKG_MASK_ALL); @@ -197,7 +196,7 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set) _wakeupgen_set_all(cpu, WKG_UNMASK_ALL); _wakeupgen_restore_masks(cpu); } - spin_unlock_irqrestore(&wakeupgen_lock, flags); + raw_spin_unlock_irqrestore(&wakeupgen_lock, flags); } #endif diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c index be6bc89..719b716 100644 --- a/arch/arm/mach-omap2/omap2-restart.c +++ b/arch/arm/mach-omap2/omap2-restart.c @@ -13,6 +13,7 @@ #include <linux/clk.h> #include <linux/io.h> +#include "soc.h" #include "common.h" #include "prm2xxx.h" @@ -62,4 +63,4 @@ static int __init omap2xxx_common_look_up_clks_for_reset(void) return 0; } -core_initcall(omap2xxx_common_look_up_clks_for_reset); +omap_core_initcall(omap2xxx_common_look_up_clks_for_reset); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 6897ae2..708bb11 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -15,13 +15,14 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/platform_device.h> #include <linux/memblock.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/export.h> +#include <linux/irqchip/arm-gic.h> -#include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> #include <asm/memblock.h> @@ -225,7 +226,7 @@ static int __init omap_l2_cache_init(void) return 0; } -early_initcall(omap_l2_cache_init); +omap_early_initcall(omap_l2_cache_init); #endif void __iomem *omap4_get_sar_ram_base(void) @@ -253,18 +254,12 @@ static int __init omap4_sar_ram_init(void) return 0; } -early_initcall(omap4_sar_ram_init); - -static struct of_device_id irq_match[] __initdata = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, }, - { } -}; +omap_early_initcall(omap4_sar_ram_init); void __init omap_gic_of_init(void) { omap_wakeupgen_init(); - of_irq_init(irq_match); + irqchip_init(); } #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) diff --git a/arch/arm/mach-omap2/omap44xx.h b/arch/arm/mach-omap2/omap44xx.h index 43b927b..8a515bb 100644 --- a/arch/arm/mach-omap2/omap44xx.h +++ b/arch/arm/mach-omap2/omap44xx.h @@ -40,7 +40,6 @@ #define OMAP44XX_GIC_DIST_BASE 0x48241000 #define OMAP44XX_GIC_CPU_BASE 0x48240100 #define OMAP44XX_IRQ_GIC_START 32 -#define OMAP44XX_SCU_BASE 0x48240000 #define OMAP44XX_LOCAL_TWD_BASE 0x48240600 #define OMAP44XX_L2CACHE_BASE 0x48242000 #define OMAP44XX_WKUPGEN_BASE 0x48281000 diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index e065daa..381be7a 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -17,68 +17,15 @@ * to control power management and interconnect properties of their * devices. * - * In the medium- to long-term, this code should either be - * a) implemented via arch-specific pointers in platform_data - * or - * b) implemented as a proper omap_bus/omap_device in Linux, no more - * platform_data func pointers + * In the medium- to long-term, this code should be implemented as a + * proper omap_bus/omap_device in Linux, no more platform_data func + * pointers * * - * Guidelines for usage by driver authors: - * - * 1. These functions are intended to be used by device drivers via - * function pointers in struct platform_data. As an example, - * omap_device_enable() should be passed to the driver as - * - * struct foo_driver_platform_data { - * ... - * int (*device_enable)(struct platform_device *pdev); - * ... - * } - * - * Note that the generic "device_enable" name is used, rather than - * "omap_device_enable". This is so other architectures can pass in their - * own enable/disable functions here. - * - * This should be populated during device setup: - * - * ... - * pdata->device_enable = omap_device_enable; - * ... - * - * 2. Drivers should first check to ensure the function pointer is not null - * before calling it, as in: - * - * if (pdata->device_enable) - * pdata->device_enable(pdev); - * - * This allows other architectures that don't use similar device_enable()/ - * device_shutdown() functions to execute normally. - * - * ... - * - * Suggested usage by device drivers: - * - * During device initialization: - * device_enable() - * - * During device idle: - * (save remaining device context if necessary) - * device_idle(); - * - * During device resume: - * device_enable(); - * (restore context if necessary) - * - * During device shutdown: - * device_shutdown() - * (device must be reinitialized at this point to use it again) - * */ #undef DEBUG #include <linux/kernel.h> -#include <linux/export.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/err.h> @@ -89,158 +36,12 @@ #include <linux/of.h> #include <linux/notifier.h> +#include "soc.h" #include "omap_device.h" #include "omap_hwmod.h" -/* These parameters are passed to _omap_device_{de,}activate() */ -#define USE_WAKEUP_LAT 0 -#define IGNORE_WAKEUP_LAT 1 - -static int omap_early_device_register(struct platform_device *pdev); - -static struct omap_device_pm_latency omap_default_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - } -}; - /* Private functions */ -/** - * _omap_device_activate - increase device readiness - * @od: struct omap_device * - * @ignore_lat: increase to latency target (0) or full readiness (1)? - * - * Increase readiness of omap_device @od (thus decreasing device - * wakeup latency, but consuming more power). If @ignore_lat is - * IGNORE_WAKEUP_LAT, make the omap_device fully active. Otherwise, - * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup - * latency is greater than the requested maximum wakeup latency, step - * backwards in the omap_device_pm_latency table to ensure the - * device's maximum wakeup latency is less than or equal to the - * requested maximum wakeup latency. Returns 0. - */ -static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) -{ - struct timespec a, b, c; - - dev_dbg(&od->pdev->dev, "omap_device: activating\n"); - - while (od->pm_lat_level > 0) { - struct omap_device_pm_latency *odpl; - unsigned long long act_lat = 0; - - od->pm_lat_level--; - - odpl = od->pm_lats + od->pm_lat_level; - - if (!ignore_lat && - (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) - break; - - read_persistent_clock(&a); - - /* XXX check return code */ - odpl->activate_func(od); - - read_persistent_clock(&b); - - c = timespec_sub(b, a); - act_lat = timespec_to_ns(&c); - - dev_dbg(&od->pdev->dev, - "omap_device: pm_lat %d: activate: elapsed time %llu nsec\n", - od->pm_lat_level, act_lat); - - if (act_lat > odpl->activate_lat) { - odpl->activate_lat_worst = act_lat; - if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { - odpl->activate_lat = act_lat; - dev_dbg(&od->pdev->dev, - "new worst case activate latency %d: %llu\n", - od->pm_lat_level, act_lat); - } else - dev_warn(&od->pdev->dev, - "activate latency %d higher than expected. (%llu > %d)\n", - od->pm_lat_level, act_lat, - odpl->activate_lat); - } - - od->dev_wakeup_lat -= odpl->activate_lat; - } - - return 0; -} - -/** - * _omap_device_deactivate - decrease device readiness - * @od: struct omap_device * - * @ignore_lat: decrease to latency target (0) or full inactivity (1)? - * - * Decrease readiness of omap_device @od (thus increasing device - * wakeup latency, but conserving power). If @ignore_lat is - * IGNORE_WAKEUP_LAT, make the omap_device fully inactive. Otherwise, - * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup - * latency is less than the requested maximum wakeup latency, step - * forwards in the omap_device_pm_latency table to ensure the device's - * maximum wakeup latency is less than or equal to the requested - * maximum wakeup latency. Returns 0. - */ -static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) -{ - struct timespec a, b, c; - - dev_dbg(&od->pdev->dev, "omap_device: deactivating\n"); - - while (od->pm_lat_level < od->pm_lats_cnt) { - struct omap_device_pm_latency *odpl; - unsigned long long deact_lat = 0; - - odpl = od->pm_lats + od->pm_lat_level; - - if (!ignore_lat && - ((od->dev_wakeup_lat + odpl->activate_lat) > - od->_dev_wakeup_lat_limit)) - break; - - read_persistent_clock(&a); - - /* XXX check return code */ - odpl->deactivate_func(od); - - read_persistent_clock(&b); - - c = timespec_sub(b, a); - deact_lat = timespec_to_ns(&c); - - dev_dbg(&od->pdev->dev, - "omap_device: pm_lat %d: deactivate: elapsed time %llu nsec\n", - od->pm_lat_level, deact_lat); - - if (deact_lat > odpl->deactivate_lat) { - odpl->deactivate_lat_worst = deact_lat; - if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { - odpl->deactivate_lat = deact_lat; - dev_dbg(&od->pdev->dev, - "new worst case deactivate latency %d: %llu\n", - od->pm_lat_level, deact_lat); - } else - dev_warn(&od->pdev->dev, - "deactivate latency %d higher than expected. (%llu > %d)\n", - od->pm_lat_level, deact_lat, - odpl->deactivate_lat); - } - - od->dev_wakeup_lat += odpl->activate_lat; - - od->pm_lat_level++; - } - - return 0; -} - static void _add_clkdev(struct omap_device *od, const char *clk_alias, const char *clk_name) { @@ -315,9 +116,6 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od, * @oh: ptr to the single omap_hwmod that backs this omap_device * @pdata: platform_data ptr to associate with the platform_device * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * @is_early_device: should the device be registered as an early device or not * * Function for building an omap_device already registered from device-tree * @@ -356,7 +154,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) hwmods[i] = oh; } - od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0); + od = omap_device_alloc(pdev, hwmods, oh_cnt); if (!od) { dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n", oh_name); @@ -407,6 +205,39 @@ static int _omap_device_notifier_call(struct notifier_block *nb, return NOTIFY_DONE; } +/** + * _omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods + * @od: struct omap_device *od + * + * Enable all underlying hwmods. Returns 0. + */ +static int _omap_device_enable_hwmods(struct omap_device *od) +{ + int i; + + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_enable(od->hwmods[i]); + + /* XXX pass along return value here? */ + return 0; +} + +/** + * _omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods + * @od: struct omap_device *od + * + * Idle all underlying hwmods. Returns 0. + */ +static int _omap_device_idle_hwmods(struct omap_device *od) +{ + int i; + + for (i = 0; i < od->hwmods_cnt; i++) + omap_hwmod_idle(od->hwmods[i]); + + /* XXX pass along return value here? */ + return 0; +} /* Public functions for use by core code */ @@ -526,18 +357,14 @@ static int _od_fill_dma_resources(struct omap_device *od, * @oh: ptr to the single omap_hwmod that backs this omap_device * @pdata: platform_data ptr to associate with the platform_device * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats * * Convenience function for allocating an omap_device structure and filling - * hwmods, resources and pm_latency attributes. + * hwmods, and resources. * * Returns an struct omap_device pointer or ERR_PTR() on error; */ struct omap_device *omap_device_alloc(struct platform_device *pdev, - struct omap_hwmod **ohs, int oh_cnt, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt) + struct omap_hwmod **ohs, int oh_cnt) { int ret = -ENOMEM; struct omap_device *od; @@ -626,18 +453,6 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev, goto oda_exit3; have_everything: - if (!pm_lats) { - pm_lats = omap_default_latency; - pm_lats_cnt = ARRAY_SIZE(omap_default_latency); - } - - od->pm_lats_cnt = pm_lats_cnt; - od->pm_lats = kmemdup(pm_lats, - sizeof(struct omap_device_pm_latency) * pm_lats_cnt, - GFP_KERNEL); - if (!od->pm_lats) - goto oda_exit3; - pdev->archdata.od = od; for (i = 0; i < oh_cnt; i++) { @@ -663,7 +478,6 @@ void omap_device_delete(struct omap_device *od) return; od->pdev->archdata.od = NULL; - kfree(od->pm_lats); kfree(od->hwmods); kfree(od); } @@ -675,9 +489,6 @@ void omap_device_delete(struct omap_device *od) * @oh: ptr to the single omap_hwmod that backs this omap_device * @pdata: platform_data ptr to associate with the platform_device * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * @is_early_device: should the device be registered as an early device or not * * Convenience function for building and registering a single * omap_device record, which in turn builds and registers a @@ -685,11 +496,10 @@ void omap_device_delete(struct omap_device *od) * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise, * passes along the return value of omap_device_build_ss(). */ -struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id, - struct omap_hwmod *oh, void *pdata, - int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device) +struct platform_device __init *omap_device_build(const char *pdev_name, + int pdev_id, + struct omap_hwmod *oh, + void *pdata, int pdata_len) { struct omap_hwmod *ohs[] = { oh }; @@ -697,8 +507,7 @@ struct platform_device __init *omap_device_build(const char *pdev_name, int pdev return ERR_PTR(-EINVAL); return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata, - pdata_len, pm_lats, pm_lats_cnt, - is_early_device); + pdata_len); } /** @@ -708,9 +517,6 @@ struct platform_device __init *omap_device_build(const char *pdev_name, int pdev * @oh: ptr to the single omap_hwmod that backs this omap_device * @pdata: platform_data ptr to associate with the platform_device * @pdata_len: amount of memory pointed to by @pdata - * @pm_lats: pointer to a omap_device_pm_latency array for this device - * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats - * @is_early_device: should the device be registered as an early device or not * * Convenience function for building and registering an omap_device * subsystem record. Subsystem records consist of multiple @@ -718,11 +524,11 @@ struct platform_device __init *omap_device_build(const char *pdev_name, int pdev * platform_device record. Returns an ERR_PTR() on error, or passes * along the return value of omap_device_register(). */ -struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id, - struct omap_hwmod **ohs, int oh_cnt, - void *pdata, int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device) +struct platform_device __init *omap_device_build_ss(const char *pdev_name, + int pdev_id, + struct omap_hwmod **ohs, + int oh_cnt, void *pdata, + int pdata_len) { int ret = -ENOMEM; struct platform_device *pdev; @@ -746,7 +552,7 @@ struct platform_device __init *omap_device_build_ss(const char *pdev_name, int p else dev_set_name(&pdev->dev, "%s", pdev->name); - od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt); + od = omap_device_alloc(pdev, ohs, oh_cnt); if (IS_ERR(od)) goto odbs_exit1; @@ -754,10 +560,7 @@ struct platform_device __init *omap_device_build_ss(const char *pdev_name, int p if (ret) goto odbs_exit2; - if (is_early_device) - ret = omap_early_device_register(pdev); - else - ret = omap_device_register(pdev); + ret = omap_device_register(pdev); if (ret) goto odbs_exit2; @@ -774,24 +577,6 @@ odbs_exit: return ERR_PTR(ret); } -/** - * omap_early_device_register - register an omap_device as an early platform - * device. - * @od: struct omap_device * to register - * - * Register the omap_device structure. This currently just calls - * platform_early_add_device() on the underlying platform_device. - * Returns 0 by default. - */ -static int __init omap_early_device_register(struct platform_device *pdev) -{ - struct platform_device *devices[1]; - - devices[0] = pdev; - early_platform_add_devices(devices, 1); - return 0; -} - #ifdef CONFIG_PM_RUNTIME static int _od_runtime_suspend(struct device *dev) { @@ -902,10 +687,9 @@ int omap_device_register(struct platform_device *pdev) * to be accessible and ready to operate. This generally involves * enabling clocks, setting SYSCONFIG registers; and in the future may * involve remuxing pins. Device drivers should call this function - * (through platform_data function pointers) where they would normally - * enable clocks, etc. Returns -EINVAL if called when the omap_device - * is already enabled, or passes along the return value of - * _omap_device_activate(). + * indirectly via pm_runtime_get*(). Returns -EINVAL if called when + * the omap_device is already enabled, or passes along the return + * value of _omap_device_enable_hwmods(). */ int omap_device_enable(struct platform_device *pdev) { @@ -921,14 +705,8 @@ int omap_device_enable(struct platform_device *pdev) return -EINVAL; } - /* Enable everything if we're enabling this device from scratch */ - if (od->_state == OMAP_DEVICE_STATE_UNKNOWN) - od->pm_lat_level = od->pm_lats_cnt; - - ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT); + ret = _omap_device_enable_hwmods(od); - od->dev_wakeup_lat = 0; - od->_dev_wakeup_lat_limit = UINT_MAX; od->_state = OMAP_DEVICE_STATE_ENABLED; return ret; @@ -938,14 +716,10 @@ int omap_device_enable(struct platform_device *pdev) * omap_device_idle - idle an omap_device * @od: struct omap_device * to idle * - * Idle omap_device @od by calling as many .deactivate_func() entries - * in the omap_device's pm_lats table as is possible without exceeding - * the device's maximum wakeup latency limit, pm_lat_limit. Device - * drivers should call this function (through platform_data function - * pointers) where they would normally disable clocks after operations - * complete, etc.. Returns -EINVAL if the omap_device is not + * Idle omap_device @od. Device drivers call this function indirectly + * via pm_runtime_put*(). Returns -EINVAL if the omap_device is not * currently enabled, or passes along the return value of - * _omap_device_deactivate(). + * _omap_device_idle_hwmods(). */ int omap_device_idle(struct platform_device *pdev) { @@ -961,7 +735,7 @@ int omap_device_idle(struct platform_device *pdev) return -EINVAL; } - ret = _omap_device_deactivate(od, USE_WAKEUP_LAT); + ret = _omap_device_idle_hwmods(od); od->_state = OMAP_DEVICE_STATE_IDLE; @@ -969,42 +743,6 @@ int omap_device_idle(struct platform_device *pdev) } /** - * omap_device_shutdown - shut down an omap_device - * @od: struct omap_device * to shut down - * - * Shut down omap_device @od by calling all .deactivate_func() entries - * in the omap_device's pm_lats table and then shutting down all of - * the underlying omap_hwmods. Used when a device is being "removed" - * or a device driver is being unloaded. Returns -EINVAL if the - * omap_device is not currently enabled or idle, or passes along the - * return value of _omap_device_deactivate(). - */ -int omap_device_shutdown(struct platform_device *pdev) -{ - int ret, i; - struct omap_device *od; - - od = to_omap_device(pdev); - - if (od->_state != OMAP_DEVICE_STATE_ENABLED && - od->_state != OMAP_DEVICE_STATE_IDLE) { - dev_warn(&pdev->dev, - "omap_device: %s() called from invalid state %d\n", - __func__, od->_state); - return -EINVAL; - } - - ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT); - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_shutdown(od->hwmods[i]); - - od->_state = OMAP_DEVICE_STATE_SHUTDOWN; - - return ret; -} - -/** * omap_device_assert_hardreset - set a device's hardreset line * @pdev: struct platform_device * to reset * @name: const char * name of the reset line @@ -1060,86 +798,6 @@ int omap_device_deassert_hardreset(struct platform_device *pdev, } /** - * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim - * @od: struct omap_device * - * - * When a device's maximum wakeup latency limit changes, call some of - * the .activate_func or .deactivate_func function pointers in the - * omap_device's pm_lats array to ensure that the device's maximum - * wakeup latency is less than or equal to the new latency limit. - * Intended to be called by OMAP PM code whenever a device's maximum - * wakeup latency limit changes (e.g., via - * omap_pm_set_dev_wakeup_lat()). Returns 0 if nothing needs to be - * done (e.g., if the omap_device is not currently idle, or if the - * wakeup latency is already current with the new limit) or passes - * along the return value of _omap_device_deactivate() or - * _omap_device_activate(). - */ -int omap_device_align_pm_lat(struct platform_device *pdev, - u32 new_wakeup_lat_limit) -{ - int ret = -EINVAL; - struct omap_device *od; - - od = to_omap_device(pdev); - - if (new_wakeup_lat_limit == od->dev_wakeup_lat) - return 0; - - od->_dev_wakeup_lat_limit = new_wakeup_lat_limit; - - if (od->_state != OMAP_DEVICE_STATE_IDLE) - return 0; - else if (new_wakeup_lat_limit > od->dev_wakeup_lat) - ret = _omap_device_deactivate(od, USE_WAKEUP_LAT); - else if (new_wakeup_lat_limit < od->dev_wakeup_lat) - ret = _omap_device_activate(od, USE_WAKEUP_LAT); - - return ret; -} - -/** - * omap_device_get_pwrdm - return the powerdomain * associated with @od - * @od: struct omap_device * - * - * Return the powerdomain associated with the first underlying - * omap_hwmod for this omap_device. Intended for use by core OMAP PM - * code. Returns NULL on error or a struct powerdomain * upon - * success. - */ -struct powerdomain *omap_device_get_pwrdm(struct omap_device *od) -{ - /* - * XXX Assumes that all omap_hwmod powerdomains are identical. - * This may not necessarily be true. There should be a sanity - * check in here to WARN() if any difference appears. - */ - if (!od->hwmods_cnt) - return NULL; - - return omap_hwmod_get_pwrdm(od->hwmods[0]); -} - -/** - * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base - * @od: struct omap_device * - * - * Return the MPU's virtual address for the base of the hwmod, from - * the ioremap() that the hwmod code does. Only valid if there is one - * hwmod associated with this device. Returns NULL if there are zero - * or more than one hwmods associated with this omap_device; - * otherwise, passes along the return value from - * omap_hwmod_get_mpu_rt_va(). - */ -void __iomem *omap_device_get_rt_va(struct omap_device *od) -{ - if (od->hwmods_cnt != 1) - return NULL; - - return omap_hwmod_get_mpu_rt_va(od->hwmods[0]); -} - -/** * omap_device_get_by_hwmod_name() - convert a hwmod name to * device pointer. * @oh_name: name of the hwmod device @@ -1173,82 +831,6 @@ struct device *omap_device_get_by_hwmod_name(const char *oh_name) return &oh->od->pdev->dev; } -EXPORT_SYMBOL(omap_device_get_by_hwmod_name); - -/* - * Public functions intended for use in omap_device_pm_latency - * .activate_func and .deactivate_func function pointers - */ - -/** - * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods - * @od: struct omap_device *od - * - * Enable all underlying hwmods. Returns 0. - */ -int omap_device_enable_hwmods(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_enable(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -/** - * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods - * @od: struct omap_device *od - * - * Idle all underlying hwmods. Returns 0. - */ -int omap_device_idle_hwmods(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_idle(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -/** - * omap_device_disable_clocks - disable all main and interface clocks - * @od: struct omap_device *od - * - * Disable the main functional clock and interface clock for all of the - * omap_hwmods associated with the omap_device. Returns 0. - */ -int omap_device_disable_clocks(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_disable_clocks(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} - -/** - * omap_device_enable_clocks - enable all main and interface clocks - * @od: struct omap_device *od - * - * Enable the main functional clock and interface clock for all of the - * omap_hwmods associated with the omap_device. Returns 0. - */ -int omap_device_enable_clocks(struct omap_device *od) -{ - int i; - - for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_enable_clocks(od->hwmods[i]); - - /* XXX pass along return value here? */ - return 0; -} static struct notifier_block platform_nb = { .notifier_call = _omap_device_notifier_call, @@ -1259,7 +841,7 @@ static int __init omap_device_init(void) bus_register_notifier(&platform_bus_type, &platform_nb); return 0; } -core_initcall(omap_device_init); +omap_core_initcall(omap_device_init); /** * omap_device_late_idle - idle devices without drivers @@ -1297,4 +879,4 @@ static int __init omap_device_late_init(void) bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle); return 0; } -late_initcall(omap_device_late_init); +omap_late_initcall(omap_device_late_init); diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h index 0933c59..044c31d 100644 --- a/arch/arm/mach-omap2/omap_device.h +++ b/arch/arm/mach-omap2/omap_device.h @@ -13,20 +13,12 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Eventually this type of functionality should either be - * a) implemented via arch-specific pointers in platform_device - * or - * b) implemented as a proper omap_bus/omap_device in Linux, no more - * platform_device + * This type of functionality should be implemented as a proper + * omap_bus/omap_device in Linux. * * omap_device differs from omap_hwmod in that it includes external * (e.g., board- and system-level) integration details. omap_hwmod * stores hardware data that is invariant for a given OMAP chip. - * - * To do: - * - GPIO integration - * - regulator integration - * */ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H @@ -45,19 +37,14 @@ extern struct dev_pm_domain omap_device_pm_domain; #define OMAP_DEVICE_STATE_SHUTDOWN 3 /* omap_device.flags values */ -#define OMAP_DEVICE_SUSPENDED BIT(0) -#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1) +#define OMAP_DEVICE_SUSPENDED BIT(0) +#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1) /** * struct omap_device - omap_device wrapper for platform_devices * @pdev: platform_device * @hwmods: (one .. many per omap_device) * @hwmods_cnt: ARRAY_SIZE() of @hwmods - * @pm_lats: ptr to an omap_device_pm_latency table - * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats - * @pm_lat_level: array index of the last odpl entry executed - -1 if never - * @dev_wakeup_lat: dev wakeup latency in nanoseconds - * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM * @_state: one of OMAP_DEVICE_STATE_* (see above) * @flags: device flags * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h> @@ -71,12 +58,7 @@ extern struct dev_pm_domain omap_device_pm_domain; struct omap_device { struct platform_device *pdev; struct omap_hwmod **hwmods; - struct omap_device_pm_latency *pm_lats; - u32 dev_wakeup_lat; - u32 _dev_wakeup_lat_limit; unsigned long _driver_status; - u8 pm_lats_cnt; - s8 pm_lat_level; u8 hwmods_cnt; u8 _state; u8 flags; @@ -86,36 +68,25 @@ struct omap_device { int omap_device_enable(struct platform_device *pdev); int omap_device_idle(struct platform_device *pdev); -int omap_device_shutdown(struct platform_device *pdev); /* Core code interface */ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, - struct omap_hwmod *oh, void *pdata, - int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device); + struct omap_hwmod *oh, void *pdata, + int pdata_len); struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_hwmod **oh, int oh_cnt, - void *pdata, int pdata_len, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt, int is_early_device); + void *pdata, int pdata_len); struct omap_device *omap_device_alloc(struct platform_device *pdev, - struct omap_hwmod **ohs, int oh_cnt, - struct omap_device_pm_latency *pm_lats, - int pm_lats_cnt); + struct omap_hwmod **ohs, int oh_cnt); void omap_device_delete(struct omap_device *od); int omap_device_register(struct platform_device *pdev); -void __iomem *omap_device_get_rt_va(struct omap_device *od); struct device *omap_device_get_by_hwmod_name(const char *oh_name); /* OMAP PM interface */ -int omap_device_align_pm_lat(struct platform_device *pdev, - u32 new_wakeup_lat_limit); -struct powerdomain *omap_device_get_pwrdm(struct omap_device *od); int omap_device_get_context_loss_count(struct platform_device *pdev); /* Other */ @@ -124,40 +95,6 @@ int omap_device_assert_hardreset(struct platform_device *pdev, const char *name); int omap_device_deassert_hardreset(struct platform_device *pdev, const char *name); -int omap_device_idle_hwmods(struct omap_device *od); -int omap_device_enable_hwmods(struct omap_device *od); - -int omap_device_disable_clocks(struct omap_device *od); -int omap_device_enable_clocks(struct omap_device *od); - -/* - * Entries should be kept in latency order ascending - * - * deact_lat is the maximum number of microseconds required to complete - * deactivate_func() at the device's slowest OPP. - * - * act_lat is the maximum number of microseconds required to complete - * activate_func() at the device's slowest OPP. - * - * This will result in some suboptimal power management decisions at fast - * OPPs, but avoids having to recompute all device power management decisions - * if the system shifts from a fast OPP to a slow OPP (in order to meet - * latency requirements). - * - * XXX should deactivate_func/activate_func() take platform_device pointers - * rather than omap_device pointers? - */ -struct omap_device_pm_latency { - u32 deactivate_lat; - u32 deactivate_lat_worst; - int (*deactivate_func)(struct omap_device *od); - u32 activate_lat; - u32 activate_lat_worst; - int (*activate_func)(struct omap_device *od); - u32 flags; -}; - -#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1) /* Get omap_device pointer from platform_device pointer */ static inline struct omap_device *to_omap_device(struct platform_device *pdev) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 4653efb..a898498 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -139,6 +139,8 @@ #include <linux/slab.h> #include <linux/bootmem.h> +#include <asm/system_misc.h> + #include "clock.h" #include "omap_hwmod.h" @@ -2134,6 +2136,8 @@ static int _enable(struct omap_hwmod *oh) _enable_clocks(oh); if (soc_ops.enable_module) soc_ops.enable_module(oh); + if (oh->flags & HWMOD_BLOCK_WFI) + disable_hlt(); if (soc_ops.update_context_lost) soc_ops.update_context_lost(oh); @@ -2195,6 +2199,8 @@ static int _idle(struct omap_hwmod *oh) _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); + if (oh->flags & HWMOD_BLOCK_WFI) + enable_hlt(); if (soc_ops.disable_module) soc_ops.disable_module(oh); @@ -2303,6 +2309,8 @@ static int _shutdown(struct omap_hwmod *oh) if (oh->_state == _HWMOD_STATE_ENABLED) { _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ + if (oh->flags & HWMOD_BLOCK_WFI) + enable_hlt(); if (soc_ops.disable_module) soc_ops.disable_module(oh); _disable_clocks(oh); @@ -3303,7 +3311,7 @@ static int __init omap_hwmod_setup_all(void) return 0; } -core_initcall(omap_hwmod_setup_all); +omap_core_initcall(omap_hwmod_setup_all); /** * omap_hwmod_enable - enable an omap_hwmod diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 3ae852a..80c00e7 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -451,6 +451,14 @@ struct omap_hwmod_omap4_prcm { * enabled. This prevents the hwmod code from being able to * enable and reset the IP block early. XXX Eventually it should * be possible to query the clock framework for this information. + * HWMOD_BLOCK_WFI: Some OMAP peripherals apparently don't work + * correctly if the MPU is allowed to go idle while the + * peripherals are active. This is apparently true for the I2C on + * OMAP2420, and also the EMAC on AM3517/3505. It's unlikely that + * this is really true -- we're probably not configuring something + * correctly, or this is being abused to deal with some PM latency + * issues -- but we're currently suffering from a shortage of + * folks who are able to track these issues down properly. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -462,6 +470,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) #define HWMOD_16BIT_REG (1 << 8) #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) +#define HWMOD_BLOCK_WFI (1 << 10) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index b5efe58..6a764af 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -121,7 +121,12 @@ static struct omap_hwmod omap2420_i2c1_hwmod = { }, .class = &i2c_class, .dev_attr = &i2c_dev_attr, - .flags = HWMOD_16BIT_REG, + /* + * From mach-omap2/pm24xx.c: "Putting MPU into the WFI state + * while a transfer is active seems to cause the I2C block to + * timeout. Why? Good question." + */ + .flags = (HWMOD_16BIT_REG | HWMOD_BLOCK_WFI), }; /* I2C2 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 793f54a..7ec1083 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -616,7 +616,7 @@ static struct omap_hwmod omap44xx_dmic_hwmod = { .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_dmic_irqs, .sdma_reqs = omap44xx_dmic_sdma_reqs, - .main_clk = "dmic_fck", + .main_clk = "func_dmic_abe_gfclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET, @@ -1161,7 +1161,7 @@ static struct omap_hwmod omap44xx_gpio1_hwmod = { .class = &omap44xx_gpio_hwmod_class, .clkdm_name = "l4_wkup_clkdm", .mpu_irqs = omap44xx_gpio1_irqs, - .main_clk = "gpio1_ick", + .main_clk = "l4_wkup_clk_mux_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET, @@ -1190,7 +1190,7 @@ static struct omap_hwmod omap44xx_gpio2_hwmod = { .clkdm_name = "l4_per_clkdm", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap44xx_gpio2_irqs, - .main_clk = "gpio2_ick", + .main_clk = "l4_div_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET, @@ -1219,7 +1219,7 @@ static struct omap_hwmod omap44xx_gpio3_hwmod = { .clkdm_name = "l4_per_clkdm", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap44xx_gpio3_irqs, - .main_clk = "gpio3_ick", + .main_clk = "l4_div_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET, @@ -1248,7 +1248,7 @@ static struct omap_hwmod omap44xx_gpio4_hwmod = { .clkdm_name = "l4_per_clkdm", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap44xx_gpio4_irqs, - .main_clk = "gpio4_ick", + .main_clk = "l4_div_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET, @@ -1277,7 +1277,7 @@ static struct omap_hwmod omap44xx_gpio5_hwmod = { .clkdm_name = "l4_per_clkdm", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap44xx_gpio5_irqs, - .main_clk = "gpio5_ick", + .main_clk = "l4_div_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET, @@ -1306,7 +1306,7 @@ static struct omap_hwmod omap44xx_gpio6_hwmod = { .clkdm_name = "l4_per_clkdm", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap44xx_gpio6_irqs, - .main_clk = "gpio6_ick", + .main_clk = "l4_div_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET, @@ -1405,7 +1405,7 @@ static struct omap_hwmod omap44xx_gpu_hwmod = { .class = &omap44xx_gpu_hwmod_class, .clkdm_name = "l3_gfx_clkdm", .mpu_irqs = omap44xx_gpu_irqs, - .main_clk = "gpu_fck", + .main_clk = "sgx_clk_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET, @@ -1446,7 +1446,7 @@ static struct omap_hwmod omap44xx_hdq1w_hwmod = { .clkdm_name = "l4_per_clkdm", .flags = HWMOD_INIT_NO_RESET, /* XXX temporary */ .mpu_irqs = omap44xx_hdq1w_irqs, - .main_clk = "hdq1w_fck", + .main_clk = "func_12m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET, @@ -1550,7 +1550,7 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = { .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c1_irqs, .sdma_reqs = omap44xx_i2c1_sdma_reqs, - .main_clk = "i2c1_fck", + .main_clk = "func_96m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET, @@ -1580,7 +1580,7 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = { .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c2_irqs, .sdma_reqs = omap44xx_i2c2_sdma_reqs, - .main_clk = "i2c2_fck", + .main_clk = "func_96m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET, @@ -1610,7 +1610,7 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = { .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c3_irqs, .sdma_reqs = omap44xx_i2c3_sdma_reqs, - .main_clk = "i2c3_fck", + .main_clk = "func_96m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET, @@ -1640,7 +1640,7 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = { .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_i2c4_irqs, .sdma_reqs = omap44xx_i2c4_sdma_reqs, - .main_clk = "i2c4_fck", + .main_clk = "func_96m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET, @@ -1743,7 +1743,7 @@ static struct omap_hwmod omap44xx_iss_hwmod = { .clkdm_name = "iss_clkdm", .mpu_irqs = omap44xx_iss_irqs, .sdma_reqs = omap44xx_iss_sdma_reqs, - .main_clk = "iss_fck", + .main_clk = "ducati_clk_mux_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET, @@ -1785,7 +1785,7 @@ static struct omap_hwmod omap44xx_iva_hwmod = { .mpu_irqs = omap44xx_iva_irqs, .rst_lines = omap44xx_iva_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_resets), - .main_clk = "iva_fck", + .main_clk = "dpll_iva_m5x2_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET, @@ -1829,7 +1829,7 @@ static struct omap_hwmod omap44xx_kbd_hwmod = { .class = &omap44xx_kbd_hwmod_class, .clkdm_name = "l4_wkup_clkdm", .mpu_irqs = omap44xx_kbd_irqs, - .main_clk = "kbd_fck", + .main_clk = "sys_32k_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET, @@ -1920,7 +1920,7 @@ static struct omap_hwmod omap44xx_mcasp_hwmod = { .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_mcasp_irqs, .sdma_reqs = omap44xx_mcasp_sdma_reqs, - .main_clk = "mcasp_fck", + .main_clk = "func_mcasp_abe_gfclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET, @@ -1972,7 +1972,7 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = { .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_mcbsp1_irqs, .sdma_reqs = omap44xx_mcbsp1_sdma_reqs, - .main_clk = "mcbsp1_fck", + .main_clk = "func_mcbsp1_gfclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET, @@ -2007,7 +2007,7 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = { .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_mcbsp2_irqs, .sdma_reqs = omap44xx_mcbsp2_sdma_reqs, - .main_clk = "mcbsp2_fck", + .main_clk = "func_mcbsp2_gfclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET, @@ -2042,7 +2042,7 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = { .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_mcbsp3_irqs, .sdma_reqs = omap44xx_mcbsp3_sdma_reqs, - .main_clk = "mcbsp3_fck", + .main_clk = "func_mcbsp3_gfclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET, @@ -2077,7 +2077,7 @@ static struct omap_hwmod omap44xx_mcbsp4_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mcbsp4_irqs, .sdma_reqs = omap44xx_mcbsp4_sdma_reqs, - .main_clk = "mcbsp4_fck", + .main_clk = "per_mcbsp4_gfclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET, @@ -2140,7 +2140,7 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, - .main_clk = "mcpdm_fck", + .main_clk = "pad_clks_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET, @@ -2201,7 +2201,7 @@ static struct omap_hwmod omap44xx_mcspi1_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mcspi1_irqs, .sdma_reqs = omap44xx_mcspi1_sdma_reqs, - .main_clk = "mcspi1_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET, @@ -2237,7 +2237,7 @@ static struct omap_hwmod omap44xx_mcspi2_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mcspi2_irqs, .sdma_reqs = omap44xx_mcspi2_sdma_reqs, - .main_clk = "mcspi2_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET, @@ -2273,7 +2273,7 @@ static struct omap_hwmod omap44xx_mcspi3_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mcspi3_irqs, .sdma_reqs = omap44xx_mcspi3_sdma_reqs, - .main_clk = "mcspi3_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET, @@ -2307,7 +2307,7 @@ static struct omap_hwmod omap44xx_mcspi4_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mcspi4_irqs, .sdma_reqs = omap44xx_mcspi4_sdma_reqs, - .main_clk = "mcspi4_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET, @@ -2363,7 +2363,7 @@ static struct omap_hwmod omap44xx_mmc1_hwmod = { .clkdm_name = "l3_init_clkdm", .mpu_irqs = omap44xx_mmc1_irqs, .sdma_reqs = omap44xx_mmc1_sdma_reqs, - .main_clk = "mmc1_fck", + .main_clk = "hsmmc1_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET, @@ -2392,7 +2392,7 @@ static struct omap_hwmod omap44xx_mmc2_hwmod = { .clkdm_name = "l3_init_clkdm", .mpu_irqs = omap44xx_mmc2_irqs, .sdma_reqs = omap44xx_mmc2_sdma_reqs, - .main_clk = "mmc2_fck", + .main_clk = "hsmmc2_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET, @@ -2420,7 +2420,7 @@ static struct omap_hwmod omap44xx_mmc3_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mmc3_irqs, .sdma_reqs = omap44xx_mmc3_sdma_reqs, - .main_clk = "mmc3_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET, @@ -2448,7 +2448,7 @@ static struct omap_hwmod omap44xx_mmc4_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mmc4_irqs, .sdma_reqs = omap44xx_mmc4_sdma_reqs, - .main_clk = "mmc4_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET, @@ -2476,7 +2476,7 @@ static struct omap_hwmod omap44xx_mmc5_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mmc5_irqs, .sdma_reqs = omap44xx_mmc5_sdma_reqs, - .main_clk = "mmc5_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET, @@ -2702,13 +2702,6 @@ static struct resource omap44xx_usb_phy_and_pll_addrs[] = { .end = 0x4a0ae000, .flags = IORESOURCE_MEM, }, - { - /* XXX: Remove this once control module driver is in place */ - .name = "ctrl_dev", - .start = 0x4a002300, - .end = 0x4a002303, - .flags = IORESOURCE_MEM, - }, { } }; @@ -2725,7 +2718,7 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", .class = &omap44xx_ocp2scp_hwmod_class, .clkdm_name = "l3_init_clkdm", - .main_clk = "ocp2scp_usb_phy_phy_48m", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET, @@ -3162,7 +3155,7 @@ static struct omap_hwmod omap44xx_timer1_hwmod = { .clkdm_name = "l4_wkup_clkdm", .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer1_irqs, - .main_clk = "timer1_fck", + .main_clk = "dmt1_clk_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET, @@ -3185,7 +3178,7 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { .clkdm_name = "l4_per_clkdm", .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer2_irqs, - .main_clk = "timer2_fck", + .main_clk = "cm2_dm2_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET, @@ -3206,7 +3199,7 @@ static struct omap_hwmod omap44xx_timer3_hwmod = { .class = &omap44xx_timer_hwmod_class, .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_timer3_irqs, - .main_clk = "timer3_fck", + .main_clk = "cm2_dm3_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET, @@ -3227,7 +3220,7 @@ static struct omap_hwmod omap44xx_timer4_hwmod = { .class = &omap44xx_timer_hwmod_class, .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_timer4_irqs, - .main_clk = "timer4_fck", + .main_clk = "cm2_dm4_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET, @@ -3248,7 +3241,7 @@ static struct omap_hwmod omap44xx_timer5_hwmod = { .class = &omap44xx_timer_hwmod_class, .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_timer5_irqs, - .main_clk = "timer5_fck", + .main_clk = "timer5_sync_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET, @@ -3270,8 +3263,7 @@ static struct omap_hwmod omap44xx_timer6_hwmod = { .class = &omap44xx_timer_hwmod_class, .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_timer6_irqs, - - .main_clk = "timer6_fck", + .main_clk = "timer6_sync_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET, @@ -3293,7 +3285,7 @@ static struct omap_hwmod omap44xx_timer7_hwmod = { .class = &omap44xx_timer_hwmod_class, .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_timer7_irqs, - .main_clk = "timer7_fck", + .main_clk = "timer7_sync_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET, @@ -3315,7 +3307,7 @@ static struct omap_hwmod omap44xx_timer8_hwmod = { .class = &omap44xx_timer_hwmod_class, .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_timer8_irqs, - .main_clk = "timer8_fck", + .main_clk = "timer8_sync_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET, @@ -3337,7 +3329,7 @@ static struct omap_hwmod omap44xx_timer9_hwmod = { .class = &omap44xx_timer_hwmod_class, .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_timer9_irqs, - .main_clk = "timer9_fck", + .main_clk = "cm2_dm9_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET, @@ -3360,7 +3352,7 @@ static struct omap_hwmod omap44xx_timer10_hwmod = { .clkdm_name = "l4_per_clkdm", .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer10_irqs, - .main_clk = "timer10_fck", + .main_clk = "cm2_dm10_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET, @@ -3382,7 +3374,7 @@ static struct omap_hwmod omap44xx_timer11_hwmod = { .class = &omap44xx_timer_hwmod_class, .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_timer11_irqs, - .main_clk = "timer11_fck", + .main_clk = "cm2_dm11_mux", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET, @@ -3433,7 +3425,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_uart1_irqs, .sdma_reqs = omap44xx_uart1_sdma_reqs, - .main_clk = "uart1_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET, @@ -3461,7 +3453,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_uart2_irqs, .sdma_reqs = omap44xx_uart2_sdma_reqs, - .main_clk = "uart2_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET, @@ -3490,7 +3482,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, .mpu_irqs = omap44xx_uart3_irqs, .sdma_reqs = omap44xx_uart3_sdma_reqs, - .main_clk = "uart3_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET, @@ -3518,7 +3510,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_uart4_irqs, .sdma_reqs = omap44xx_uart4_sdma_reqs, - .main_clk = "uart4_fck", + .main_clk = "func_48m_fclk", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET, @@ -3797,7 +3789,7 @@ static struct omap_hwmod omap44xx_wd_timer2_hwmod = { .class = &omap44xx_wd_timer_hwmod_class, .clkdm_name = "l4_wkup_clkdm", .mpu_irqs = omap44xx_wd_timer2_irqs, - .main_clk = "wd_timer2_fck", + .main_clk = "sys_32k_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET, @@ -3818,7 +3810,7 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = { .class = &omap44xx_wd_timer_hwmod_class, .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_wd_timer3_irqs, - .main_clk = "wd_timer3_fck", + .main_clk = "sys_32k_ck", .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET, @@ -6156,12 +6148,6 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { .pa_end = 0x4a0ab7ff, .flags = ADDR_TYPE_RT }, - { - /* XXX: Remove this once control module driver is in place */ - .pa_start = 0x4a00233c, - .pa_end = 0x4a00233f, - .flags = ADDR_TYPE_RT - }, { } }; diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index e237602..eb8a25d 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -63,7 +63,7 @@ static int __init omap4430_phy_power_down(void) return 0; } -early_initcall(omap4430_phy_power_down); +omap_early_initcall(omap4430_phy_power_down); void am35x_musb_reset(void) { diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c index 62772e0..fc67add 100644 --- a/arch/arm/mach-omap2/opp3xxx_data.c +++ b/arch/arm/mach-omap2/opp3xxx_data.c @@ -168,4 +168,4 @@ int __init omap3_opp_init(void) return r; } -device_initcall(omap3_opp_init); +omap_device_initcall(omap3_opp_init); diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index d470b72..1ef7a3e 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -177,4 +177,4 @@ int __init omap4_opp_init(void) ARRAY_SIZE(omap446x_opp_def_list)); return r; } -device_initcall(omap4_opp_init); +omap_device_initcall(omap4_opp_init); diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index e2c291f..1edd000 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -83,10 +83,8 @@ static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user) strncmp(clkdm->name, "dpll", 4) == 0) return 0; - seq_printf(s, "%s->%s (%d)", clkdm->name, - clkdm->pwrdm.ptr->name, - atomic_read(&clkdm->usecount)); - seq_printf(s, "\n"); + seq_printf(s, "%s->%s (%d)\n", clkdm->name, clkdm->pwrdm.ptr->name, + clkdm->usecount); return 0; } @@ -279,6 +277,6 @@ static int __init pm_dbg_init(void) return 0; } -arch_initcall(pm_dbg_init); +omap_arch_initcall(pm_dbg_init); #endif diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index f4b3143..cd6682d 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -32,8 +32,6 @@ #include "pm.h" #include "twl-common.h" -static struct omap_device_pm_latency *pm_lats; - /* * omap_pm_suspend: points to a function that does the SoC-specific * suspend work @@ -82,7 +80,7 @@ static int __init _init_omap_device(char *name) __func__, name)) return -ENODEV; - pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false); + pdev = omap_device_build(oh->name, 0, oh, NULL, 0); if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n", __func__, name)) return -ENODEV; @@ -108,80 +106,19 @@ static void __init omap2_init_processor_devices(void) } } -/* Types of sleep_switch used in omap_set_pwrdm_state */ -#define FORCEWAKEUP_SWITCH 0 -#define LOWPOWERSTATE_SWITCH 1 - int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) { + /* XXX The usecount test is racy */ if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) && !(clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)) clkdm_allow_idle(clkdm); else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && - atomic_read(&clkdm->usecount) == 0) + clkdm->usecount == 0) clkdm_sleep(clkdm); return 0; } /* - * This sets pwrdm state (other than mpu & core. Currently only ON & - * RET are supported. - */ -int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst) -{ - u8 curr_pwrst, next_pwrst; - int sleep_switch = -1, ret = 0, hwsup = 0; - - if (!pwrdm || IS_ERR(pwrdm)) - return -EINVAL; - - while (!(pwrdm->pwrsts & (1 << pwrst))) { - if (pwrst == PWRDM_POWER_OFF) - return ret; - pwrst--; - } - - next_pwrst = pwrdm_read_next_pwrst(pwrdm); - if (next_pwrst == pwrst) - return ret; - - curr_pwrst = pwrdm_read_pwrst(pwrdm); - if (curr_pwrst < PWRDM_POWER_ON) { - if ((curr_pwrst > pwrst) && - (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) { - sleep_switch = LOWPOWERSTATE_SWITCH; - } else { - hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); - clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - sleep_switch = FORCEWAKEUP_SWITCH; - } - } - - ret = pwrdm_set_next_pwrst(pwrdm, pwrst); - if (ret) - pr_err("%s: unable to set power state of powerdomain: %s\n", - __func__, pwrdm->name); - - switch (sleep_switch) { - case FORCEWAKEUP_SWITCH: - if (hwsup) - clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); - else - clkdm_sleep(pwrdm->pwrdm_clkdms[0]); - break; - case LOWPOWERSTATE_SWITCH: - pwrdm_set_lowpwrstchange(pwrdm); - pwrdm_wait_transition(pwrdm); - pwrdm_state_switch(pwrdm); - break; - } - - return ret; -} - - - -/* * This API is to be called during init to set the various voltage * domains to the voltage as per the opp table. Typically we boot up * at the nominal voltage. So this function finds out the rate of @@ -336,7 +273,7 @@ static int __init omap2_common_pm_init(void) return 0; } -postcore_initcall(omap2_common_pm_init); +omap_postcore_initcall(omap2_common_pm_init); int __init omap2_common_pm_late_init(void) { diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index c22503b..7bdd22a 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -33,7 +33,6 @@ static inline int omap4_idle_init(void) extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); -extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state); extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); extern int (*omap_pm_suspend)(void); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index c333fa6..b2a4df6 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -90,11 +90,7 @@ static int omap2_enter_full_retention(void) omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2); omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); - /* - * Set MPU powerdomain's next power state to RETENTION; - * preserve logic state during retention - */ - pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET); + pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET); pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); /* Workaround to kill USB */ @@ -137,15 +133,10 @@ no_sleep: /* Mask future PRCM-to-MPU interrupts */ omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); - return 0; -} - -static int omap2_i2c_active(void) -{ - u32 l; + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); + pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON); - l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1); - return l & (OMAP2420_EN_I2C2_MASK | OMAP2420_EN_I2C1_MASK); + return 0; } static int sti_console_enabled; @@ -172,11 +163,6 @@ static int omap2_allow_mpu_retention(void) static void omap2_enter_mpu_retention(void) { - /* Putting MPU into the WFI state while a transfer is active - * seems to cause the I2C block to timeout. Why? Good question. */ - if (omap2_i2c_active()) - return; - /* The peripherals seem not to be able to wake up the MPU when * it is in retention mode. */ if (omap2_allow_mpu_retention()) { @@ -186,17 +172,16 @@ static void omap2_enter_mpu_retention(void) omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST); /* Try to enter MPU retention */ - omap2_prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) | - OMAP_LOGICRETSTATE_MASK, - MPU_MOD, OMAP2_PM_PWSTCTRL); + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); + } else { /* Block MPU retention */ - - omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD, - OMAP2_PM_PWSTCTRL); + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); } omap2_sram_idle(); + + pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); } static int omap2_can_sleep(void) @@ -251,25 +236,17 @@ static void __init prcm_setup_regs(void) for (i = 0; i < num_mem_banks; i++) pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET); - /* Set CORE powerdomain's next power state to RETENTION */ - pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET); + pwrdm_set_logic_retst(core_pwrdm, PWRDM_POWER_RET); - /* - * Set MPU powerdomain's next power state to RETENTION; - * preserve logic state during retention - */ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET); - pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET); /* Force-power down DSP, GFX powerdomains */ pwrdm = clkdm_get_pwrdm(dsp_clkdm); pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); - clkdm_sleep(dsp_clkdm); pwrdm = clkdm_get_pwrdm(gfx_clkdm); pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF); - clkdm_sleep(gfx_clkdm); /* Enable hardware-supervised idle for all clkdms */ clkdm_for_each(omap_pm_clkdms_setup, NULL); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 7be3622..2d93d8b 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -351,12 +351,10 @@ static void omap3_pm_idle(void) if (omap_irq_pending()) goto out; - trace_power_start(POWER_CSTATE, 1, smp_processor_id()); trace_cpu_idle(1, smp_processor_id()); omap_sram_idle(); - trace_power_end(smp_processor_id()); trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); out: diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index eb78ae7..9debf82 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -48,8 +48,7 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) } } - omap_pmu_dev = omap_device_build_ss(dev_name, -1, oh, oh_num, NULL, 0, - NULL, 0, 0); + omap_pmu_dev = omap_device_build_ss(dev_name, -1, oh, oh_num, NULL, 0); WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n", dev_name); @@ -89,4 +88,4 @@ static int __init omap_init_pmu(void) return omap2_init_pmu(oh_num, oh_names); } -subsys_initcall(omap_init_pmu); +omap_subsys_initcall(omap_init_pmu); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index dea62a9..8e61d80 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -19,6 +19,7 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/string.h> +#include <linux/spinlock.h> #include <trace/events/power.h> #include "cm2xxx_3xxx.h" @@ -42,6 +43,16 @@ enum { PWRDM_STATE_PREV, }; +/* + * Types of sleep_switch used internally in omap_set_pwrdm_state() + * and its associated static functions + * + * XXX Better documentation is needed here + */ +#define ALREADYACTIVE_SWITCH 0 +#define FORCEWAKEUP_SWITCH 1 +#define LOWPOWERSTATE_SWITCH 2 +#define ERROR_SWITCH 3 /* pwrdm_list contains all registered struct powerdomains */ static LIST_HEAD(pwrdm_list); @@ -101,6 +112,7 @@ static int _pwrdm_register(struct powerdomain *pwrdm) pwrdm->voltdm.ptr = voltdm; INIT_LIST_HEAD(&pwrdm->voltdm_node); voltdm_add_pwrdm(voltdm, pwrdm); + spin_lock_init(&pwrdm->_lock); list_add(&pwrdm->node, &pwrdm_list); @@ -112,7 +124,7 @@ static int _pwrdm_register(struct powerdomain *pwrdm) for (i = 0; i < pwrdm->banks; i++) pwrdm->ret_mem_off_counter[i] = 0; - pwrdm_wait_transition(pwrdm); + arch_pwrdm->pwrdm_wait_transition(pwrdm); pwrdm->state = pwrdm_read_pwrst(pwrdm); pwrdm->state_counter[pwrdm->state] = 1; @@ -143,7 +155,7 @@ static void _update_logic_membank_counters(struct powerdomain *pwrdm) static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) { - int prev, state, trace_state = 0; + int prev, next, state, trace_state = 0; if (pwrdm == NULL) return -EINVAL; @@ -164,9 +176,10 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) * If the power domain did not hit the desired state, * generate a trace event with both the desired and hit states */ - if (state != prev) { + next = pwrdm_read_next_pwrst(pwrdm); + if (next != prev) { trace_state = (PWRDM_TRACE_STATES_FLAG | - ((state & OMAP_POWERSTATE_MASK) << 8) | + ((next & OMAP_POWERSTATE_MASK) << 8) | ((prev & OMAP_POWERSTATE_MASK) << 0)); trace_power_domain_target(pwrdm->name, trace_state, smp_processor_id()); @@ -199,6 +212,80 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) return 0; } +/** + * _pwrdm_save_clkdm_state_and_activate - prepare for power state change + * @pwrdm: struct powerdomain * to operate on + * @curr_pwrst: current power state of @pwrdm + * @pwrst: power state to switch to + * @hwsup: ptr to a bool to return whether the clkdm is hardware-supervised + * + * Determine whether the powerdomain needs to be turned on before + * attempting to switch power states. Called by + * omap_set_pwrdm_state(). NOTE that if the powerdomain contains + * multiple clockdomains, this code assumes that the first clockdomain + * supports software-supervised wakeup mode - potentially a problem. + * Returns the power state switch mode currently in use (see the + * "Types of sleep_switch" comment above). + */ +static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, + u8 curr_pwrst, u8 pwrst, + bool *hwsup) +{ + u8 sleep_switch; + + if (curr_pwrst < 0) { + WARN_ON(1); + sleep_switch = ERROR_SWITCH; + } else if (curr_pwrst < PWRDM_POWER_ON) { + if (curr_pwrst > pwrst && + pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && + arch_pwrdm->pwrdm_set_lowpwrstchange) { + sleep_switch = LOWPOWERSTATE_SWITCH; + } else { + *hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); + clkdm_wakeup_nolock(pwrdm->pwrdm_clkdms[0]); + sleep_switch = FORCEWAKEUP_SWITCH; + } + } else { + sleep_switch = ALREADYACTIVE_SWITCH; + } + + return sleep_switch; +} + +/** + * _pwrdm_restore_clkdm_state - restore the clkdm hwsup state after pwrst change + * @pwrdm: struct powerdomain * to operate on + * @sleep_switch: return value from _pwrdm_save_clkdm_state_and_activate() + * @hwsup: should @pwrdm's first clockdomain be set to hardware-supervised mode? + * + * Restore the clockdomain state perturbed by + * _pwrdm_save_clkdm_state_and_activate(), and call the power state + * bookkeeping code. Called by omap_set_pwrdm_state(). NOTE that if + * the powerdomain contains multiple clockdomains, this assumes that + * the first associated clockdomain supports either + * hardware-supervised idle control in the register, or + * software-supervised sleep. No return value. + */ +static void _pwrdm_restore_clkdm_state(struct powerdomain *pwrdm, + u8 sleep_switch, bool hwsup) +{ + switch (sleep_switch) { + case FORCEWAKEUP_SWITCH: + if (hwsup) + clkdm_allow_idle_nolock(pwrdm->pwrdm_clkdms[0]); + else + clkdm_sleep_nolock(pwrdm->pwrdm_clkdms[0]); + break; + case LOWPOWERSTATE_SWITCH: + if (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && + arch_pwrdm->pwrdm_set_lowpwrstchange) + arch_pwrdm->pwrdm_set_lowpwrstchange(pwrdm); + pwrdm_state_switch_nolock(pwrdm); + break; + } +} + /* Public functions */ /** @@ -275,6 +362,30 @@ int pwrdm_complete_init(void) } /** + * pwrdm_lock - acquire a Linux spinlock on a powerdomain + * @pwrdm: struct powerdomain * to lock + * + * Acquire the powerdomain spinlock on @pwrdm. No return value. + */ +void pwrdm_lock(struct powerdomain *pwrdm) + __acquires(&pwrdm->_lock) +{ + spin_lock_irqsave(&pwrdm->_lock, pwrdm->_lock_flags); +} + +/** + * pwrdm_unlock - release a Linux spinlock on a powerdomain + * @pwrdm: struct powerdomain * to unlock + * + * Release the powerdomain spinlock on @pwrdm. No return value. + */ +void pwrdm_unlock(struct powerdomain *pwrdm) + __releases(&pwrdm->_lock) +{ + spin_unlock_irqrestore(&pwrdm->_lock, pwrdm->_lock_flags); +} + +/** * pwrdm_lookup - look up a powerdomain by name, return a pointer * @name: name of powerdomain * @@ -920,65 +1031,27 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm) return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0; } -/** - * pwrdm_set_lowpwrstchange - Request a low power state change - * @pwrdm: struct powerdomain * - * - * Allows a powerdomain to transtion to a lower power sleep state - * from an existing sleep state without waking up the powerdomain. - * Returns -EINVAL if the powerdomain pointer is null or if the - * powerdomain does not support LOWPOWERSTATECHANGE, or returns 0 - * upon success. - */ -int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm) -{ - int ret = -EINVAL; - - if (!pwrdm) - return -EINVAL; - - if (!(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) - return -EINVAL; - - pr_debug("powerdomain: %s: setting LOWPOWERSTATECHANGE bit\n", - pwrdm->name); - - if (arch_pwrdm && arch_pwrdm->pwrdm_set_lowpwrstchange) - ret = arch_pwrdm->pwrdm_set_lowpwrstchange(pwrdm); - - return ret; -} - -/** - * pwrdm_wait_transition - wait for powerdomain power transition to finish - * @pwrdm: struct powerdomain * to wait for - * - * If the powerdomain @pwrdm is in the process of a state transition, - * spin until it completes the power transition, or until an iteration - * bailout value is reached. Returns -EINVAL if the powerdomain - * pointer is null, -EAGAIN if the bailout value was reached, or - * returns 0 upon success. - */ -int pwrdm_wait_transition(struct powerdomain *pwrdm) +int pwrdm_state_switch_nolock(struct powerdomain *pwrdm) { - int ret = -EINVAL; + int ret; - if (!pwrdm) + if (!pwrdm || !arch_pwrdm) return -EINVAL; - if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition) - ret = arch_pwrdm->pwrdm_wait_transition(pwrdm); + ret = arch_pwrdm->pwrdm_wait_transition(pwrdm); + if (!ret) + ret = _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW); return ret; } -int pwrdm_state_switch(struct powerdomain *pwrdm) +int __deprecated pwrdm_state_switch(struct powerdomain *pwrdm) { int ret; - ret = pwrdm_wait_transition(pwrdm); - if (!ret) - ret = _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW); + pwrdm_lock(pwrdm); + ret = pwrdm_state_switch_nolock(pwrdm); + pwrdm_unlock(pwrdm); return ret; } @@ -1004,6 +1077,61 @@ int pwrdm_post_transition(struct powerdomain *pwrdm) } /** + * omap_set_pwrdm_state - change a powerdomain's current power state + * @pwrdm: struct powerdomain * to change the power state of + * @pwrst: power state to change to + * + * Change the current hardware power state of the powerdomain + * represented by @pwrdm to the power state represented by @pwrst. + * Returns -EINVAL if @pwrdm is null or invalid or if the + * powerdomain's current power state could not be read, or returns 0 + * upon success or if @pwrdm does not support @pwrst or any + * lower-power state. XXX Should not return 0 if the @pwrdm does not + * support @pwrst or any lower-power state: this should be an error. + */ +int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) +{ + u8 curr_pwrst, next_pwrst, sleep_switch; + int ret = 0; + bool hwsup = false; + + if (!pwrdm || IS_ERR(pwrdm)) + return -EINVAL; + + while (!(pwrdm->pwrsts & (1 << pwrst))) { + if (pwrst == PWRDM_POWER_OFF) + return ret; + pwrst--; + } + + pwrdm_lock(pwrdm); + + curr_pwrst = pwrdm_read_pwrst(pwrdm); + next_pwrst = pwrdm_read_next_pwrst(pwrdm); + if (curr_pwrst == pwrst && next_pwrst == pwrst) + goto osps_out; + + sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst, + pwrst, &hwsup); + if (sleep_switch == ERROR_SWITCH) { + ret = -EINVAL; + goto osps_out; + } + + ret = pwrdm_set_next_pwrst(pwrdm, pwrst); + if (ret) + pr_err("%s: unable to set power state of powerdomain: %s\n", + __func__, pwrdm->name); + + _pwrdm_restore_clkdm_state(pwrdm, sleep_switch, hwsup); + +osps_out: + pwrdm_unlock(pwrdm); + + return ret; +} + +/** * pwrdm_get_context_loss_count - get powerdomain's context loss count * @pwrdm: struct powerdomain * to wait for * diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 5277d56eb..140c360 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -19,8 +19,7 @@ #include <linux/types.h> #include <linux/list.h> - -#include <linux/atomic.h> +#include <linux/spinlock.h> #include "voltage.h" @@ -44,18 +43,20 @@ #define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | PWRSTS_ON) -/* Powerdomain flags */ -#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */ -#define PWRDM_HAS_MPU_QUIRK (1 << 1) /* MPU pwr domain has MEM bank 0 bits - * in MEM bank 1 position. This is - * true for OMAP3430 - */ -#define PWRDM_HAS_LOWPOWERSTATECHANGE (1 << 2) /* - * support to transition from a - * sleep state to a lower sleep - * state without waking up the - * powerdomain - */ +/* + * Powerdomain flags (struct powerdomain.flags) + * + * PWRDM_HAS_HDWR_SAR - powerdomain has hardware save-and-restore support + * + * PWRDM_HAS_MPU_QUIRK - MPU pwr domain has MEM bank 0 bits in MEM + * bank 1 position. This is true for OMAP3430 + * + * PWRDM_HAS_LOWPOWERSTATECHANGE - can transition from a sleep state + * to a lower sleep state without waking up the powerdomain + */ +#define PWRDM_HAS_HDWR_SAR BIT(0) +#define PWRDM_HAS_MPU_QUIRK BIT(1) +#define PWRDM_HAS_LOWPOWERSTATECHANGE BIT(2) /* * Number of memory banks that are power-controllable. On OMAP4430, the @@ -103,6 +104,8 @@ struct powerdomain; * @state_counter: * @timer: * @state_timer: + * @_lock: spinlock used to serialize powerdomain and some clockdomain ops + * @_lock_flags: stored flags when @_lock is taken * * @prcm_partition possible values are defined in mach-omap2/prcm44xx.h. */ @@ -127,7 +130,8 @@ struct powerdomain { unsigned state_counter[PWRDM_MAX_PWRSTS]; unsigned ret_logic_off_counter; unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS]; - + spinlock_t _lock; + unsigned long _lock_flags; const u8 pwrstctrl_offs; const u8 pwrstst_offs; const u32 logicretstate_mask; @@ -162,6 +166,16 @@ struct powerdomain { * @pwrdm_disable_hdwr_sar: Disable Hardware Save-Restore feature for a pd * @pwrdm_set_lowpwrstchange: Enable pd transitions from a shallow to deep sleep * @pwrdm_wait_transition: Wait for a pd state transition to complete + * + * Regarding @pwrdm_set_lowpwrstchange: On the OMAP2 and 3-family + * chips, a powerdomain's power state is not allowed to directly + * transition from one low-power state (e.g., CSWR) to another + * low-power state (e.g., OFF) without first waking up the + * powerdomain. This wastes energy. So OMAP4 chips support the + * ability to transition a powerdomain power state directly from one + * low-power state to another. The function pointed to by + * @pwrdm_set_lowpwrstchange is intended to configure the OMAP4 + * hardware powerdomain state machine to enable this feature. */ struct pwrdm_ops { int (*pwrdm_set_next_pwrst)(struct powerdomain *pwrdm, u8 pwrst); @@ -225,15 +239,15 @@ int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm); int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm); bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm); -int pwrdm_wait_transition(struct powerdomain *pwrdm); - +int pwrdm_state_switch_nolock(struct powerdomain *pwrdm); int pwrdm_state_switch(struct powerdomain *pwrdm); int pwrdm_pre_transition(struct powerdomain *pwrdm); int pwrdm_post_transition(struct powerdomain *pwrdm); -int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); int pwrdm_get_context_loss_count(struct powerdomain *pwrdm); bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); +extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state); + extern void omap242x_powerdomains_init(void); extern void omap243x_powerdomains_init(void); extern void omap3xxx_powerdomains_init(void); @@ -253,5 +267,7 @@ extern u32 omap2_pwrdm_get_mem_bank_stst_mask(u8 bank); extern struct powerdomain wkup_omap2_pwrdm; extern struct powerdomain gfx_omap2_pwrdm; +extern void pwrdm_lock(struct powerdomain *pwrdm); +extern void pwrdm_unlock(struct powerdomain *pwrdm); #endif diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c index d3a5399..7b946f1 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c @@ -54,12 +54,12 @@ struct powerdomain gfx_omap2_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; struct powerdomain wkup_omap2_pwrdm = { .name = "wkup_pwrdm", .prcm_offs = WKUP_MOD, .pwrsts = PWRSTS_ON, - .voltdm = { .name = "wakeup" }, + .voltdm = { .name = "wakeup" }, }; diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c index ba520d4..578eef8 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c @@ -38,7 +38,7 @@ static struct powerdomain dsp_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain mpu_24xx_pwrdm = { @@ -53,13 +53,14 @@ static struct powerdomain mpu_24xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain core_24xx_pwrdm = { .name = "core_pwrdm", .prcm_offs = CORE_MOD, .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts_logic_ret = PWRSTS_RET, .banks = 3, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */ @@ -71,7 +72,7 @@ static struct powerdomain core_24xx_pwrdm = { [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ [2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; @@ -93,7 +94,7 @@ static struct powerdomain mdm_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; /* diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 8b23d23..f0e14e9 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -50,7 +50,7 @@ static struct powerdomain iva2_pwrdm = { [2] = PWRSTS_OFF_ON, [3] = PWRSTS_ON, }, - .voltdm = { .name = "mpu_iva" }, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain mpu_3xxx_pwrdm = { @@ -66,7 +66,7 @@ static struct powerdomain mpu_3xxx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_OFF_ON, }, - .voltdm = { .name = "mpu_iva" }, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain mpu_am35x_pwrdm = { @@ -82,7 +82,7 @@ static struct powerdomain mpu_am35x_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, }, - .voltdm = { .name = "mpu_iva" }, + .voltdm = { .name = "mpu_iva" }, }; /* @@ -109,7 +109,7 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = { [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain core_3xxx_es3_1_pwrdm = { @@ -131,7 +131,7 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = { [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain core_am35x_pwrdm = { @@ -148,7 +148,7 @@ static struct powerdomain core_am35x_pwrdm = { [0] = PWRSTS_ON, /* MEM1ONSTATE */ [1] = PWRSTS_ON, /* MEM2ONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain dss_pwrdm = { @@ -163,7 +163,7 @@ static struct powerdomain dss_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain dss_am35x_pwrdm = { @@ -178,7 +178,7 @@ static struct powerdomain dss_am35x_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; /* @@ -199,7 +199,7 @@ static struct powerdomain sgx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain sgx_am35x_pwrdm = { @@ -214,7 +214,7 @@ static struct powerdomain sgx_am35x_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain cam_pwrdm = { @@ -229,7 +229,7 @@ static struct powerdomain cam_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain per_pwrdm = { @@ -244,7 +244,7 @@ static struct powerdomain per_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain per_am35x_pwrdm = { @@ -259,13 +259,13 @@ static struct powerdomain per_am35x_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain emu_pwrdm = { .name = "emu_pwrdm", .prcm_offs = OMAP3430_EMU_MOD, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain neon_pwrdm = { @@ -273,7 +273,7 @@ static struct powerdomain neon_pwrdm = { .prcm_offs = OMAP3430_NEON_MOD, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_RET, - .voltdm = { .name = "mpu_iva" }, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain neon_am35x_pwrdm = { @@ -281,7 +281,7 @@ static struct powerdomain neon_am35x_pwrdm = { .prcm_offs = OMAP3430_NEON_MOD, .pwrsts = PWRSTS_ON, .pwrsts_logic_ret = PWRSTS_ON, - .voltdm = { .name = "mpu_iva" }, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain usbhost_pwrdm = { @@ -303,37 +303,37 @@ static struct powerdomain usbhost_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain dpll1_pwrdm = { .name = "dpll1_pwrdm", .prcm_offs = MPU_MOD, - .voltdm = { .name = "mpu_iva" }, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain dpll2_pwrdm = { .name = "dpll2_pwrdm", .prcm_offs = OMAP3430_IVA2_MOD, - .voltdm = { .name = "mpu_iva" }, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain dpll3_pwrdm = { .name = "dpll3_pwrdm", .prcm_offs = PLL_MOD, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain dpll4_pwrdm = { .name = "dpll4_pwrdm", .prcm_offs = PLL_MOD, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; static struct powerdomain dpll5_pwrdm = { .name = "dpll5_pwrdm", .prcm_offs = PLL_MOD, - .voltdm = { .name = "core" }, + .voltdm = { .name = "core" }, }; /* As powerdomains are added or removed above, this list must also be changed */ diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index a3e121f..947f6ad 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -210,6 +210,7 @@ int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, PM_WKDEP, (1 << clkdm2->dep_bit)); } +/* XXX Caller must hold the clkdm's powerdomain lock */ int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm) { struct clkdm_dep *cd; @@ -221,7 +222,7 @@ int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm) /* PRM accesses are slow, so minimize them */ mask |= 1 << cd->clkdm->dep_bit; - atomic_set(&cd->wkdep_usecount, 0); + cd->wkdep_usecount = 0; } omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index e648bd5..7721990 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -427,7 +427,7 @@ static int __init omap3xxx_prm_late_init(void) return ret; } -subsys_initcall(omap3xxx_prm_late_init); +omap_subsys_initcall(omap3xxx_prm_late_init); static void __exit omap3xxx_prm_exit(void) { diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index c05a343..d35f98a 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -665,7 +665,7 @@ static int __init omap44xx_prm_late_init(void) return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); } -subsys_initcall(omap44xx_prm_late_init); +omap_subsys_initcall(omap44xx_prm_late_init); static void __exit omap44xx_prm_exit(void) { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 04fdbc4..8396b5b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -254,7 +254,7 @@ static int __init omap_serial_early_init(void) return 0; } -core_initcall(omap_serial_early_init); +omap_core_initcall(omap_serial_early_init); /** * omap_serial_init_port() - initialize single serial port @@ -316,8 +316,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, if (WARN_ON(!oh)) return; - pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size, - NULL, 0, false); + pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size); if (IS_ERR(pdev)) { WARN(1, "Could not build omap_device for %s: %s.\n", name, oh->name); diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index 1da8f03..aee3c89 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -12,6 +12,7 @@ */ #include <linux/power/smartreflex.h> +#include "soc.h" #include "voltage.h" static int sr_class3_enable(struct omap_sr *sr) @@ -58,4 +59,4 @@ static int __init sr_class3_init(void) pr_info("SmartReflex Class3 initialized\n"); return sr_register_class(&class3_data); } -late_initcall(sr_class3_init); +omap_late_initcall(sr_class3_init); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index f31d907..092aedd 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -42,6 +42,9 @@ #undef MULTI_OMAP2 #undef OMAP_NAME +#ifdef CONFIG_ARCH_MULTIPLATFORM +#define MULTI_OMAP2 +#endif #ifdef CONFIG_SOC_OMAP2420 # ifdef OMAP_NAME # undef MULTI_OMAP2 @@ -112,6 +115,11 @@ int omap_type(void); */ unsigned int omap_rev(void); +static inline int soc_is_omap(void) +{ + return omap_rev() != 0; +} + /* * Get the CPU revision for OMAP devices */ @@ -465,5 +473,26 @@ static inline unsigned int omap4_has_ ##feat(void) \ OMAP4_HAS_FEATURE(perf_silicon, PERF_SILICON) +/* + * We need to make sure omap initcalls don't run when + * multiplatform kernels are booted on other SoCs. + */ +#define omap_initcall(level, fn) \ +static int __init __used __##fn(void) \ +{ \ + if (!soc_is_omap()) \ + return 0; \ + return fn(); \ +} \ +level(__##fn); + +#define omap_early_initcall(fn) omap_initcall(early_initcall, fn) +#define omap_core_initcall(fn) omap_initcall(core_initcall, fn) +#define omap_postcore_initcall(fn) omap_initcall(postcore_initcall, fn) +#define omap_arch_initcall(fn) omap_initcall(arch_initcall, fn) +#define omap_subsys_initcall(fn) omap_initcall(subsys_initcall, fn) +#define omap_device_initcall(fn) omap_initcall(device_initcall, fn) +#define omap_late_initcall(fn) omap_initcall(late_initcall, fn) + #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index b9753fe..bb829e0 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -152,8 +152,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->enable_on_init = sr_enable_on_init; - pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data), - NULL, 0, 0); + pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data), 0); if (IS_ERR(pdev)) pr_warning("%s: Could not build omap_device for %s: %s.\n\n", __func__, name, oh->name); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index b8ad6e6..2bdd4cf 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -131,7 +131,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, static struct clock_event_device clockevent_gpt = { .name = "gp_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 300, .set_next_event = omap2_gp_timer_set_next_event, .set_mode = omap2_gp_timer_set_mode, @@ -228,7 +227,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, int r = 0; if (of_have_populated_dt()) { - np = omap_get_timer_dt(omap_timer_match, NULL); + np = omap_get_timer_dt(omap_timer_match, property); if (!np) return -ENODEV; @@ -336,17 +335,11 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW); - clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC, - clockevent_gpt.shift); - clockevent_gpt.max_delta_ns = - clockevent_delta2ns(0xffffffff, &clockevent_gpt); - clockevent_gpt.min_delta_ns = - clockevent_delta2ns(3, &clockevent_gpt); - /* Timer internal resynch latency. */ - clockevent_gpt.cpumask = cpu_possible_mask; clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev); - clockevents_register_device(&clockevent_gpt); + clockevents_config_and_register(&clockevent_gpt, clkev.rate, + 3, /* Timer internal resynch latency */ + 0xffffffff); pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", gptimer_id, clkev.rate); @@ -552,7 +545,7 @@ static inline void __init realtime_counter_init(void) #define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ clksrc_nr, clksrc_src) \ -static void __init omap##name##_gptimer_timer_init(void) \ +void __init omap##name##_gptimer_timer_init(void) \ { \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ @@ -561,7 +554,7 @@ static void __init omap##name##_gptimer_timer_init(void) \ #define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ clksrc_nr, clksrc_src) \ -static void __init omap##name##_sync32k_timer_init(void) \ +void __init omap##name##_sync32k_timer_init(void) \ { \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ @@ -572,33 +565,23 @@ static void __init omap##name##_sync32k_timer_init(void) \ omap2_sync32k_clocksource_init(); \ } -#define OMAP_SYS_TIMER(name, clksrc) \ -struct sys_timer omap##name##_timer = { \ - .init = omap##name##_##clksrc##_timer_init, \ -}; - #ifdef CONFIG_ARCH_OMAP2 OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon", 2, OMAP2_MPU_SOURCE); -OMAP_SYS_TIMER(2, sync32k); #endif /* CONFIG_ARCH_OMAP2 */ #ifdef CONFIG_ARCH_OMAP3 OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon", 2, OMAP3_MPU_SOURCE); -OMAP_SYS_TIMER(3, sync32k); OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure", 2, OMAP3_MPU_SOURCE); -OMAP_SYS_TIMER(3_secure, sync32k); OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon", 2, OMAP3_MPU_SOURCE); -OMAP_SYS_TIMER(3_gp, gptimer); #endif /* CONFIG_ARCH_OMAP3 */ #ifdef CONFIG_SOC_AM33XX OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", 2, OMAP4_MPU_SOURCE); -OMAP_SYS_TIMER(3_am33xx, gptimer); #endif /* CONFIG_SOC_AM33XX */ #ifdef CONFIG_ARCH_OMAP4 @@ -606,7 +589,7 @@ OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", 2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); -static void __init omap4_local_timer_init(void) +void __init omap4_local_timer_init(void) { omap4_sync32k_timer_init(); /* Local timers are not supprted on OMAP4430 ES1.0 */ @@ -624,18 +607,17 @@ static void __init omap4_local_timer_init(void) } } #else /* CONFIG_LOCAL_TIMERS */ -static void __init omap4_local_timer_init(void) +void __init omap4_local_timer_init(void) { omap4_sync32k_timer_init(); } #endif /* CONFIG_LOCAL_TIMERS */ -OMAP_SYS_TIMER(4, local); #endif /* CONFIG_ARCH_OMAP4 */ #ifdef CONFIG_SOC_OMAP5 OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", 2, OMAP4_MPU_SOURCE); -static void __init omap5_realtime_timer_init(void) +void __init omap5_realtime_timer_init(void) { int err; @@ -646,7 +628,6 @@ static void __init omap5_realtime_timer_init(void) if (err) pr_err("%s: arch_timer_register failed %d\n", __func__, err); } -OMAP_SYS_TIMER(5, realtime); #endif /* CONFIG_SOC_OMAP5 */ /** @@ -702,8 +683,7 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) pdata->timer_errata = omap_dm_timer_get_errata(); pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; - pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), - NULL, 0, 0); + pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata)); if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s: %s.\n", @@ -738,7 +718,7 @@ static int __init omap2_dm_timer_init(void) return 0; } -arch_initcall(omap2_dm_timer_init); +omap_arch_initcall(omap2_dm_timer_init); /** * omap2_override_clocksource - clocksource override with user configuration diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index e49b40b..51e138c 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -23,6 +23,7 @@ #include <linux/i2c.h> #include <linux/i2c/twl.h> #include <linux/gpio.h> +#include <linux/string.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -56,7 +57,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, struct twl4030_platform_data *pmic_data) { omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); - strncpy(pmic_i2c_board_info.type, pmic_type, + strlcpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; pmic_i2c_board_info.platform_data = pmic_data; @@ -528,24 +529,29 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE) #include <linux/platform_data/omap-twl4030.h> +/* Commonly used configuration */ static struct omap_tw4030_pdata omap_twl4030_audio_data; static struct platform_device audio_device = { .name = "omap-twl4030", .id = -1, - .dev = { - .platform_data = &omap_twl4030_audio_data, - }, }; -void __init omap_twl4030_audio_init(char *card_name) +void omap_twl4030_audio_init(char *card_name, + struct omap_tw4030_pdata *pdata) { - omap_twl4030_audio_data.card_name = card_name; + if (!pdata) + pdata = &omap_twl4030_audio_data; + + pdata->card_name = card_name; + + audio_device.dev.platform_data = pdata; platform_device_register(&audio_device); } #else /* SOC_OMAP_TWL4030 */ -void __init omap_twl4030_audio_init(char *card_name) +void omap_twl4030_audio_init(char *card_name, + struct omap_tw4030_pdata *pdata) { return; } diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index dcfbad5..24b65d0 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -32,6 +32,7 @@ struct twl4030_platform_data; struct twl6040_platform_data; +struct omap_tw4030_pdata; struct i2c_board_info; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, @@ -60,6 +61,6 @@ void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); -void omap_twl4030_audio_init(char *card_name); +void omap_twl4030_audio_init(char *card_name, struct omap_tw4030_pdata *pdata); #endif /* __OMAP_PMIC_COMMON__ */ diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 2e44e8a..5706bdc 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -37,19 +37,6 @@ #define USBHS_UHH_HWMODNAME "usb_host_hs" #define USBHS_TLL_HWMODNAME "usb_tll_hs" -static struct usbhs_omap_platform_data usbhs_data; -static struct usbtll_omap_platform_data usbtll_data; -static struct ehci_hcd_omap_platform_data ehci_data; -static struct ohci_hcd_omap_platform_data ohci_data; - -static struct omap_device_pm_latency omap_uhhtll_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - /* MUX settings for EHCI pins */ /* * setup_ehci_io_mux - initialize IO pad mux for USBHOST @@ -485,32 +472,18 @@ void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +void __init usbhs_init(struct usbhs_omap_platform_data *pdata) { struct omap_hwmod *uhh_hwm, *tll_hwm; struct platform_device *pdev; int bus_id = -1; - int i; - - for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { - usbhs_data.port_mode[i] = pdata->port_mode[i]; - usbtll_data.port_mode[i] = pdata->port_mode[i]; - ohci_data.port_mode[i] = pdata->port_mode[i]; - ehci_data.port_mode[i] = pdata->port_mode[i]; - ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i]; - ehci_data.regulator[i] = pdata->regulator[i]; - } - ehci_data.phy_reset = pdata->phy_reset; - ohci_data.es2_compatibility = pdata->es2_compatibility; - usbhs_data.ehci_data = &ehci_data; - usbhs_data.ohci_data = &ohci_data; if (cpu_is_omap34xx()) { setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); if (omap_rev() <= OMAP3430_REV_ES2_1) - usbhs_data.single_ulpi_bypass = true; + pdata->single_ulpi_bypass = true; } else if (cpu_is_omap44xx()) { setup_4430ehci_io_mux(pdata->port_mode); @@ -530,9 +503,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) } pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm, - &usbtll_data, sizeof(usbtll_data), - omap_uhhtll_latency, - ARRAY_SIZE(omap_uhhtll_latency), false); + pdata, sizeof(*pdata)); if (IS_ERR(pdev)) { pr_err("Could not build hwmod device %s\n", USBHS_TLL_HWMODNAME); @@ -540,9 +511,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) } pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm, - &usbhs_data, sizeof(usbhs_data), - omap_uhhtll_latency, - ARRAY_SIZE(omap_uhhtll_latency), false); + pdata, sizeof(*pdata)); if (IS_ERR(pdev)) { pr_err("Could not build hwmod devices %s\n", USBHS_UHH_HWMODNAME); @@ -552,7 +521,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) #else -void __init usbhs_init(const struct usbhs_omap_board_data *pdata) +void __init usbhs_init(struct usbhs_omap_platform_data *pdata) { } diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 7b33b37..3242a55 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; + if (cpu_is_omap44xx()) + musb_plat.has_mailbox = true; + if (soc_is_am35xx()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; @@ -102,7 +105,7 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) return; pdev = omap_device_build(name, bus_id, oh, &musb_plat, - sizeof(musb_plat), NULL, 0, false); + sizeof(musb_plat)); if (IS_ERR(pdev)) { pr_err("Could not build omap_device for %s %s\n", name, oh_name); diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index 9b986ea..3319f5c 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -53,26 +53,8 @@ #define USBPHY_OTGSESSEND_EN (1 << 20) #define USBPHY_DATA_POLARITY (1 << 23) -struct usbhs_omap_board_data { - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - /* have to be valid if phy_reset is true and portx is in phy mode */ - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - - /* Set this to true for ES2.x silicon */ - unsigned es2_compatibility:1; - - unsigned phy_reset:1; - - /* - * Regulators for USB PHYs. - * Each PHY can have a separate regulator. - */ - struct regulator *regulator[OMAP3_HS_USB_PORTS]; -}; - extern void usb_musb_init(struct omap_musb_board_data *board_data); -extern void usbhs_init(const struct usbhs_omap_board_data *pdata); +extern void usbhs_init(struct usbhs_omap_platform_data *pdata); extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index 7c2b4ed..d15c7bb 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -124,10 +124,9 @@ static int __init omap_init_wdt(void) pdata.read_reset_sources = prm_read_reset_sources; pdev = omap_device_build(dev_name, id, oh, &pdata, - sizeof(struct omap_wd_timer_platform_data), - NULL, 0, 0); + sizeof(struct omap_wd_timer_platform_data)); WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", dev_name, oh->name); return 0; } -subsys_initcall(omap_init_wdt); +omap_subsys_initcall(omap_init_wdt); diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 32e5c21..35a8014 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -72,7 +72,7 @@ DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion_dt_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .init_machine = orion5x_dt_init, .restart = orion5x_restart, .dt_compat = orion5x_dt_compat, diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 550f923..d068f14 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -217,7 +217,7 @@ int __init orion5x_find_tclk(void) return 166666667; } -static void __init orion5x_timer_init(void) +void __init orion5x_timer_init(void) { orion5x_tclk = orion5x_find_tclk(); @@ -225,10 +225,6 @@ static void __init orion5x_timer_init(void) IRQ_ORION5X_BRIDGE, orion5x_tclk); } -struct sys_timer orion5x_timer = { - .init = orion5x_timer_init, -}; - /***************************************************************************** * General diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 7db5cdd..e603457 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -15,7 +15,7 @@ void orion5x_init(void); void orion5x_id(u32 *dev, u32 *rev, char **dev_name); void clk_init(void); extern int orion5x_tclk; -extern struct sys_timer orion5x_timer; +extern void orion5x_timer_init(void); /* * Enumerations and functions for Orion windows mapping. Used by Orion core diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index e3629c0..57d0af7 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -342,7 +342,7 @@ MACHINE_START(D2NET, "LaCie d2 Network") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END @@ -355,7 +355,7 @@ MACHINE_START(BIGDISK, "LaCie Big Disk Network") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 41fe2b1..7666564 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -362,6 +362,6 @@ MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index e533588..6eb1732 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -714,7 +714,7 @@ MACHINE_START(DNS323, "D-Link DNS-323") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h index 4322dba..abd26b5 100644 --- a/arch/arm/mach-orion5x/include/mach/uncompress.h +++ b/arch/arm/mach-orion5x/include/mach/uncompress.h @@ -46,4 +46,3 @@ static void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index f1ae10a..b984035 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -383,7 +383,7 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END @@ -397,7 +397,7 @@ MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 0c9e413..044da5b 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -322,7 +322,7 @@ MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index c1b5d8a..d49f934 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -269,7 +269,7 @@ MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index 949eaa8..8e3965c 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -271,7 +271,7 @@ MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 1c16d04..0ec94a1 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -265,7 +265,7 @@ MACHINE_START(MSS2, "Maxtor Shared Storage II") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index c87fde4..18143f2 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -233,7 +233,7 @@ MACHINE_START(MV2120, "HP Media Vault mv2120") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index 3506f16..282e503 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -425,7 +425,7 @@ MACHINE_START(NET2BIG, "LaCie 2Big Network") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 9b1c953..d6e72f67 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -171,7 +171,7 @@ MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 51ba2b8..c8b7913 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -183,7 +183,7 @@ MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 0a56b94..f9e1567 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -281,6 +281,6 @@ MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index ed50910..78a1e6a 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -123,7 +123,7 @@ MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 90e571d..acc0877 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -361,7 +361,7 @@ MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index b184f68..9c17f0c 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -326,7 +326,7 @@ MACHINE_START(TS209, "QNAP TS-109/TS-209") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index a5c2e64..8cc5ab6 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -315,7 +315,7 @@ MACHINE_START(TS409, "QNAP TS-409") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index b0727dc..e960855 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -619,6 +619,6 @@ MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC") .map_io = ts78xx_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 754c12b..66552ca 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -176,7 +176,7 @@ MACHINE_START(WNR854T, "Netgear WNR854T") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 45c2125..2c5408e 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -264,7 +264,7 @@ MACHINE_START(WRT350N_V2, "Linksys WRT350N v2") .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, + .init_time = orion5x_timer_init, .fixup = tag_fixup_mem32, .restart = orion5x_restart, MACHINE_END diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index 868796f..13bae78 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -7,7 +7,6 @@ config ARCH_PICOXCELL select DW_APB_TIMER select DW_APB_TIMER_OF select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_TCM select NO_IOPORT select SPARSE_IRQ diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c index f6c0849..70b441a 100644 --- a/arch/arm/mach-picoxcell/common.c +++ b/arch/arm/mach-picoxcell/common.c @@ -9,6 +9,7 @@ */ #include <linux/delay.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> @@ -17,7 +18,6 @@ #include <linux/dw_apb_timer.h> #include <asm/mach/arch.h> -#include <asm/hardware/vic.h> #include <asm/mach/map.h> #include "common.h" @@ -70,16 +70,6 @@ static const char *picoxcell_dt_match[] = { NULL }; -static const struct of_device_id vic_of_match[] __initconst = { - { .compatible = "arm,pl192-vic", .data = vic_of_init, }, - { /* Sentinel */ } -}; - -static void __init picoxcell_init_irq(void) -{ - of_irq_init(vic_of_match); -} - static void picoxcell_wdt_restart(char mode, const char *cmd) { /* @@ -97,9 +87,8 @@ static void picoxcell_wdt_restart(char mode, const char *cmd) DT_MACHINE_START(PICOXCELL, "Picochip picoXcell") .map_io = picoxcell_map_io, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = picoxcell_init_irq, - .handle_irq = vic_handle_irq, - .timer = &dw_apb_timer, + .init_irq = irqchip_init, + .init_time = dw_apb_timer_init, .init_machine = picoxcell_init_machine, .dt_compat = picoxcell_dt_match, .restart = picoxcell_wdt_restart, diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h index a65cb02..481b42a 100644 --- a/arch/arm/mach-picoxcell/common.h +++ b/arch/arm/mach-picoxcell/common.h @@ -12,6 +12,6 @@ #include <asm/mach/time.h> -extern struct sys_timer dw_apb_timer; +extern void dw_apb_timer_init(void); #endif /* __PICOXCELL_COMMON_H__ */ diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 558ccfb..4f7379f 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -11,6 +11,16 @@ config ARCH_PRIMA2 help Support for CSR SiRFSoC ARM Cortex A9 Platform +config ARCH_MARCO + bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform" + default y + select ARM_GIC + select CPU_V7 + select HAVE_SMP + select SMP_ON_UP + help + Support for CSR SiRFSoC ARM Cortex A9 Platform + endmenu config SIRF_IRQ diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index fc9ce22..bfe360c 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -1,4 +1,3 @@ -obj-y := timer.o obj-y += rstc.o obj-y += common.o obj-y += rtciobrg.o @@ -6,3 +5,7 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_CACHE_L2X0) += l2x0.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o obj-$(CONFIG_SIRF_IRQ) += irq.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o +obj-$(CONFIG_ARCH_MARCO) += timer-marco.o diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index f25a541..2d57aa4 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/irqchip.h> #include <asm/sizes.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -30,6 +31,12 @@ void __init sirfsoc_init_late(void) sirfsoc_pm_init(); } +static __init void sirfsoc_map_io(void) +{ + sirfsoc_map_lluart(); + sirfsoc_map_scu(); +} + #ifdef CONFIG_ARCH_PRIMA2 static const char *prima2_dt_match[] __initdata = { "sirf,prima2", @@ -38,9 +45,12 @@ static const char *prima2_dt_match[] __initdata = { DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") /* Maintainer: Barry Song <baohua.song@csr.com> */ - .map_io = sirfsoc_map_lluart, + .map_io = sirfsoc_map_io, .init_irq = sirfsoc_of_irq_init, - .timer = &sirfsoc_timer, + .init_time = sirfsoc_prima2_timer_init, +#ifdef CONFIG_MULTI_IRQ_HANDLER + .handle_irq = sirfsoc_handle_irq, +#endif .dma_zone_size = SZ_256M, .init_machine = sirfsoc_mach_init, .init_late = sirfsoc_init_late, @@ -48,3 +58,22 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") .restart = sirfsoc_restart, MACHINE_END #endif + +#ifdef CONFIG_ARCH_MARCO +static const char *marco_dt_match[] __initdata = { + "sirf,marco", + NULL +}; + +DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)") + /* Maintainer: Barry Song <baohua.song@csr.com> */ + .smp = smp_ops(sirfsoc_smp_ops), + .map_io = sirfsoc_map_io, + .init_irq = irqchip_init, + .init_time = sirfsoc_marco_timer_init, + .init_machine = sirfsoc_mach_init, + .init_late = sirfsoc_init_late, + .dt_compat = marco_dt_match, + .restart = sirfsoc_restart, +MACHINE_END +#endif diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h index 60d826f..b7c26b6 100644 --- a/arch/arm/mach-prima2/common.h +++ b/arch/arm/mach-prima2/common.h @@ -11,12 +11,19 @@ #include <linux/init.h> #include <asm/mach/time.h> +#include <asm/exception.h> -extern struct sys_timer sirfsoc_timer; +extern void sirfsoc_prima2_timer_init(void); +extern void sirfsoc_marco_timer_init(void); + +extern struct smp_operations sirfsoc_smp_ops; +extern void sirfsoc_secondary_startup(void); +extern void sirfsoc_cpu_die(unsigned int cpu); extern void __init sirfsoc_of_irq_init(void); extern void __init sirfsoc_of_clk_init(void); extern void sirfsoc_restart(char, const char *); +extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs); #ifndef CONFIG_DEBUG_LL static inline void sirfsoc_map_lluart(void) {} @@ -24,6 +31,12 @@ static inline void sirfsoc_map_lluart(void) {} extern void __init sirfsoc_map_lluart(void); #endif +#ifndef CONFIG_SMP +static inline void sirfsoc_map_scu(void) {} +#else +extern void sirfsoc_map_scu(void); +#endif + #ifdef CONFIG_SUSPEND extern int sirfsoc_pm_init(void); #else diff --git a/arch/arm/mach-prima2/headsmp.S b/arch/arm/mach-prima2/headsmp.S new file mode 100644 index 0000000..5b8a408d --- /dev/null +++ b/arch/arm/mach-prima2/headsmp.S @@ -0,0 +1,40 @@ +/* + * Entry of the second core for CSR Marco dual-core SMP SoCs + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + + __CPUINIT + +/* + * SIRFSOC specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(sirfsoc_secondary_startup) + bl v7_invalidate_l1 + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup +ENDPROC(sirfsoc_secondary_startup) + + .align +1: .long . + .long pen_release diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c new file mode 100644 index 0000000..f4b17cb --- /dev/null +++ b/arch/arm/mach-prima2/hotplug.c @@ -0,0 +1,41 @@ +/* + * CPU hotplug support for CSR Marco dual-core SMP SoCs + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/smp_plat.h> + +static inline void platform_do_lowpower(unsigned int cpu) +{ + flush_cache_all(); + + /* we put the platform to just WFI */ + for (;;) { + __asm__ __volatile__("dsb\n\t" "wfi\n\t" + : : : "memory"); + if (pen_release == cpu_logical_map(cpu)) { + /* + * OK, proper wakeup, we're done + */ + break; + } + } +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void __ref sirfsoc_cpu_die(unsigned int cpu) +{ + platform_do_lowpower(cpu); +} diff --git a/arch/arm/mach-prima2/include/mach/irqs.h b/arch/arm/mach-prima2/include/mach/irqs.h index f6014a0..b778a0f 100644 --- a/arch/arm/mach-prima2/include/mach/irqs.h +++ b/arch/arm/mach-prima2/include/mach/irqs.h @@ -10,8 +10,8 @@ #define __ASM_ARCH_IRQS_H #define SIRFSOC_INTENAL_IRQ_START 0 -#define SIRFSOC_INTENAL_IRQ_END 59 +#define SIRFSOC_INTENAL_IRQ_END 127 #define SIRFSOC_GPIO_IRQ_START (SIRFSOC_INTENAL_IRQ_END + 1) -#define NR_IRQS 220 +#define NR_IRQS 288 #endif diff --git a/arch/arm/mach-prima2/include/mach/uart.h b/arch/arm/mach-prima2/include/mach/uart.h index c98b4d5..c10510d 100644 --- a/arch/arm/mach-prima2/include/mach/uart.h +++ b/arch/arm/mach-prima2/include/mach/uart.h @@ -10,7 +10,13 @@ #define __MACH_PRIMA2_SIRFSOC_UART_H /* UART-1: used as serial debug port */ +#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1) #define SIRFSOC_UART1_PA_BASE 0xb0060000 +#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1) +#define SIRFSOC_UART1_PA_BASE 0xcc060000 +#else +#define SIRFSOC_UART1_PA_BASE 0 +#endif #define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000) #define SIRFSOC_UART1_SIZE SZ_4K diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h index 0c898fc..d1513a3 100644 --- a/arch/arm/mach-prima2/include/mach/uncompress.h +++ b/arch/arm/mach-prima2/include/mach/uncompress.h @@ -17,14 +17,15 @@ void arch_decomp_setup(void) { } -#define arch_decomp_wdog() - static __inline__ void putc(char c) { /* * during kernel decompression, all mappings are flat: * virt_addr == phys_addr */ + if (!SIRFSOC_UART1_PA_BASE) + return; + while (__raw_readl((void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS) & SIRFSOC_UART1_TXFIFO_FULL) barrier(); diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index 7dee917..6c0f3e9 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -9,17 +9,19 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> -#include <mach/hardware.h> -#include <asm/mach/irq.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/irqdomain.h> #include <linux/syscore_ops.h> +#include <asm/mach/irq.h> +#include <asm/exception.h> +#include <mach/hardware.h> #define SIRFSOC_INT_RISC_MASK0 0x0018 #define SIRFSOC_INT_RISC_MASK1 0x001C #define SIRFSOC_INT_RISC_LEVEL0 0x0020 #define SIRFSOC_INT_RISC_LEVEL1 0x0024 +#define SIRFSOC_INIT_IRQ_ID 0x0038 void __iomem *sirfsoc_intc_base; @@ -52,6 +54,16 @@ static __init void sirfsoc_irq_init(void) writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); } +asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs) +{ + u32 irqstat, irqnr; + + irqstat = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INIT_IRQ_ID); + irqnr = irqstat & 0xff; + + handle_IRQ(irqnr, regs); +} + static struct of_device_id intc_ids[] = { { .compatible = "sirf,prima2-intc" }, {}, diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c index c998377..cbcbe9c 100644 --- a/arch/arm/mach-prima2/l2x0.c +++ b/arch/arm/mach-prima2/l2x0.c @@ -11,19 +11,38 @@ #include <linux/of.h> #include <asm/hardware/cache-l2x0.h> -static struct of_device_id prima2_l2x0_ids[] = { - { .compatible = "sirf,prima2-pl310-cache" }, +struct l2x0_aux +{ + u32 val; + u32 mask; +}; + +static struct l2x0_aux prima2_l2x0_aux __initconst = { + .val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT, + .mask = 0, +}; + +static struct l2x0_aux marco_l2x0_aux __initconst = { + .val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) | + (1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT), + .mask = L2X0_AUX_CTRL_MASK, +}; + +static struct of_device_id sirf_l2x0_ids[] __initconst = { + { .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, }, + { .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, }, {}, }; static int __init sirfsoc_l2x0_init(void) { struct device_node *np; + const struct l2x0_aux *aux; - np = of_find_matching_node(NULL, prima2_l2x0_ids); + np = of_find_matching_node(NULL, sirf_l2x0_ids); if (np) { - pr_info("Initializing prima2 L2 cache\n"); - return l2x0_of_init(0x40000, 0); + aux = of_match_node(sirf_l2x0_ids, np)->data; + return l2x0_of_init(aux->val, aux->mask); } return 0; diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c new file mode 100644 index 0000000..4b78831 --- /dev/null +++ b/arch/arm/mach-prima2/platsmp.c @@ -0,0 +1,157 @@ +/* + * plat smp support for CSR Marco dual-core SMP SoCs + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/irqchip/arm-gic.h> +#include <asm/page.h> +#include <asm/mach/map.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> +#include <asm/cacheflush.h> +#include <asm/cputype.h> +#include <mach/map.h> + +#include "common.h" + +static void __iomem *scu_base; +static void __iomem *rsc_base; + +static DEFINE_SPINLOCK(boot_lock); + +static struct map_desc scu_io_desc __initdata = { + .length = SZ_4K, + .type = MT_DEVICE, +}; + +void __init sirfsoc_map_scu(void) +{ + unsigned long base; + + /* Get SCU base */ + asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base)); + + scu_io_desc.virtual = SIRFSOC_VA(base); + scu_io_desc.pfn = __phys_to_pfn(base); + iotable_init(&scu_io_desc, 1); + + scu_base = (void __iomem *)SIRFSOC_VA(base); +} + +static void __cpuinit sirfsoc_secondary_init(unsigned int cpu) +{ + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_secondary_init(0); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + smp_wmb(); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +static struct of_device_id rsc_ids[] = { + { .compatible = "sirf,marco-rsc" }, + {}, +}; + +static int __cpuinit sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + struct device_node *np; + + np = of_find_matching_node(NULL, rsc_ids); + if (!np) + return -ENODEV; + + rsc_base = of_iomap(np, 0); + if (!rsc_base) + return -ENOMEM; + + /* + * write the address of secondary startup into the sram register + * at offset 0x2C, then write the magic number 0x3CAF5D62 to the + * RSC register at offset 0x28, which is what boot rom code is + * waiting for. This would wake up the secondary core from WFE + */ +#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2C + __raw_writel(virt_to_phys(sirfsoc_secondary_startup), + rsc_base + SIRFSOC_CPU1_JUMPADDR_OFFSET); + +#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x28 + __raw_writel(0x3CAF5D62, + rsc_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET); + + /* make sure write buffer is drained */ + mb(); + + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + pen_release = cpu_logical_map(cpu); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); + + /* + * Send the secondary CPU SEV, thereby causing the boot monitor to read + * the JUMPADDR and WAKEMAGIC, and branch to the address found there. + */ + dsb_sev(); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus) +{ + scu_enable(scu_base); +} + +struct smp_operations sirfsoc_smp_ops __initdata = { + .smp_prepare_cpus = sirfsoc_smp_prepare_cpus, + .smp_secondary_init = sirfsoc_secondary_init, + .smp_boot_secondary = sirfsoc_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = sirfsoc_cpu_die, +#endif +}; diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index 762adb7..435019c 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock); static struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, + { .compatible = "sirf,marco-rstc" }, {}, }; @@ -42,27 +43,37 @@ early_initcall(sirfsoc_of_rstc_init); int sirfsoc_reset_device(struct device *dev) { - const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL); - unsigned int reset_bit; + u32 reset_bit; - if (!prop) - return -ENODEV; - - reset_bit = be32_to_cpup(prop); + if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit)) + return -EINVAL; mutex_lock(&rstc_lock); - /* - * Writing 1 to this bit resets corresponding block. Writing 0 to this - * bit de-asserts reset signal of the corresponding block. - * datasheet doesn't require explicit delay between the set and clear - * of reset bit. it could be shorter if tests pass. - */ - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit, - sirfsoc_rstc_base + (reset_bit / 32) * 4); - msleep(10); - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit, - sirfsoc_rstc_base + (reset_bit / 32) * 4); + if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) { + /* + * Writing 1 to this bit resets corresponding block. Writing 0 to this + * bit de-asserts reset signal of the corresponding block. + * datasheet doesn't require explicit delay between the set and clear + * of reset bit. it could be shorter if tests pass. + */ + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 4); + msleep(10); + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 4); + } else { + /* + * For MARCO and POLO + * Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR + * register de-asserts reset signal of the corresponding block. + * datasheet doesn't require explicit delay between the set and clear + * of reset bit. it could be shorter if tests pass. + */ + writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); + msleep(10); + writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); + } mutex_unlock(&rstc_lock); diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c index 5573536..9f2da2e 100644 --- a/arch/arm/mach-prima2/rtciobrg.c +++ b/arch/arm/mach-prima2/rtciobrg.c @@ -104,6 +104,7 @@ EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel); static const struct of_device_id rtciobrg_ids[] = { { .compatible = "sirf,prima2-rtciobg" }, + { .compatible = "sirf,marco-rtciobg" }, {} }; diff --git a/arch/arm/mach-prima2/timer-marco.c b/arch/arm/mach-prima2/timer-marco.c new file mode 100644 index 0000000..f4eea2e --- /dev/null +++ b/arch/arm/mach-prima2/timer-marco.c @@ -0,0 +1,316 @@ +/* + * System timer for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/bitops.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <asm/sched_clock.h> +#include <asm/localtimer.h> +#include <asm/mach/time.h> + +#include "common.h" + +#define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000 +#define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004 +#define SIRFSOC_TIMER_MATCH_0 0x0018 +#define SIRFSOC_TIMER_MATCH_1 0x001c +#define SIRFSOC_TIMER_COUNTER_0 0x0048 +#define SIRFSOC_TIMER_COUNTER_1 0x004c +#define SIRFSOC_TIMER_INTR_STATUS 0x0060 +#define SIRFSOC_TIMER_WATCHDOG_EN 0x0064 +#define SIRFSOC_TIMER_64COUNTER_CTRL 0x0068 +#define SIRFSOC_TIMER_64COUNTER_LO 0x006c +#define SIRFSOC_TIMER_64COUNTER_HI 0x0070 +#define SIRFSOC_TIMER_64COUNTER_LOAD_LO 0x0074 +#define SIRFSOC_TIMER_64COUNTER_LOAD_HI 0x0078 +#define SIRFSOC_TIMER_64COUNTER_RLATCHED_LO 0x007c +#define SIRFSOC_TIMER_64COUNTER_RLATCHED_HI 0x0080 + +#define SIRFSOC_TIMER_REG_CNT 6 + +static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = { + SIRFSOC_TIMER_WATCHDOG_EN, + SIRFSOC_TIMER_32COUNTER_0_CTRL, + SIRFSOC_TIMER_32COUNTER_1_CTRL, + SIRFSOC_TIMER_64COUNTER_CTRL, + SIRFSOC_TIMER_64COUNTER_RLATCHED_LO, + SIRFSOC_TIMER_64COUNTER_RLATCHED_HI, +}; + +static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT]; + +static void __iomem *sirfsoc_timer_base; +static void __init sirfsoc_of_timer_map(void); + +/* disable count and interrupt */ +static inline void sirfsoc_timer_count_disable(int idx) +{ + writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) & ~0x7, + sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx); +} + +/* enable count and interrupt */ +static inline void sirfsoc_timer_count_enable(int idx) +{ + writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) | 0x7, + sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx); +} + +/* timer interrupt handler */ +static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *ce = dev_id; + int cpu = smp_processor_id(); + + /* clear timer interrupt */ + writel_relaxed(BIT(cpu), sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); + + if (ce->mode == CLOCK_EVT_MODE_ONESHOT) + sirfsoc_timer_count_disable(cpu); + + ce->event_handler(ce); + + return IRQ_HANDLED; +} + +/* read 64-bit timer counter */ +static cycle_t sirfsoc_timer_read(struct clocksource *cs) +{ + u64 cycles; + + writel_relaxed((readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | + BIT(0)) & ~BIT(1), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); + + cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_HI); + cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_LO); + + return cycles; +} + +static int sirfsoc_timer_set_next_event(unsigned long delta, + struct clock_event_device *ce) +{ + int cpu = smp_processor_id(); + + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0 + + 4 * cpu); + writel_relaxed(delta, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0 + + 4 * cpu); + + /* enable the tick */ + sirfsoc_timer_count_enable(cpu); + + return 0; +} + +static void sirfsoc_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *ce) +{ + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + /* enable in set_next_event */ + break; + default: + break; + } + + sirfsoc_timer_count_disable(smp_processor_id()); +} + +static void sirfsoc_clocksource_suspend(struct clocksource *cs) +{ + int i; + + for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) + sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); +} + +static void sirfsoc_clocksource_resume(struct clocksource *cs) +{ + int i; + + for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) + writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); + + writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], + sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO); + writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], + sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI); + + writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | + BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); +} + +static struct clock_event_device sirfsoc_clockevent = { + .name = "sirfsoc_clockevent", + .rating = 200, + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_mode = sirfsoc_timer_set_mode, + .set_next_event = sirfsoc_timer_set_next_event, +}; + +static struct clocksource sirfsoc_clocksource = { + .name = "sirfsoc_clocksource", + .rating = 200, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .read = sirfsoc_timer_read, + .suspend = sirfsoc_clocksource_suspend, + .resume = sirfsoc_clocksource_resume, +}; + +static struct irqaction sirfsoc_timer_irq = { + .name = "sirfsoc_timer0", + .flags = IRQF_TIMER | IRQF_NOBALANCING, + .handler = sirfsoc_timer_interrupt, + .dev_id = &sirfsoc_clockevent, +}; + +#ifdef CONFIG_LOCAL_TIMERS + +static struct irqaction sirfsoc_timer1_irq = { + .name = "sirfsoc_timer1", + .flags = IRQF_TIMER | IRQF_NOBALANCING, + .handler = sirfsoc_timer_interrupt, +}; + +static int __cpuinit sirfsoc_local_timer_setup(struct clock_event_device *ce) +{ + /* Use existing clock_event for cpu 0 */ + if (!smp_processor_id()) + return 0; + + ce->irq = sirfsoc_timer1_irq.irq; + ce->name = "local_timer"; + ce->features = sirfsoc_clockevent.features; + ce->rating = sirfsoc_clockevent.rating; + ce->set_mode = sirfsoc_timer_set_mode; + ce->set_next_event = sirfsoc_timer_set_next_event; + ce->shift = sirfsoc_clockevent.shift; + ce->mult = sirfsoc_clockevent.mult; + ce->max_delta_ns = sirfsoc_clockevent.max_delta_ns; + ce->min_delta_ns = sirfsoc_clockevent.min_delta_ns; + + sirfsoc_timer1_irq.dev_id = ce; + BUG_ON(setup_irq(ce->irq, &sirfsoc_timer1_irq)); + irq_set_affinity(sirfsoc_timer1_irq.irq, cpumask_of(1)); + + clockevents_register_device(ce); + return 0; +} + +static void sirfsoc_local_timer_stop(struct clock_event_device *ce) +{ + sirfsoc_timer_count_disable(1); + + remove_irq(sirfsoc_timer1_irq.irq, &sirfsoc_timer1_irq); +} + +static struct local_timer_ops sirfsoc_local_timer_ops __cpuinitdata = { + .setup = sirfsoc_local_timer_setup, + .stop = sirfsoc_local_timer_stop, +}; +#endif /* CONFIG_LOCAL_TIMERS */ + +static void __init sirfsoc_clockevent_init(void) +{ + clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60); + + sirfsoc_clockevent.max_delta_ns = + clockevent_delta2ns(-2, &sirfsoc_clockevent); + sirfsoc_clockevent.min_delta_ns = + clockevent_delta2ns(2, &sirfsoc_clockevent); + + sirfsoc_clockevent.cpumask = cpumask_of(0); + clockevents_register_device(&sirfsoc_clockevent); +#ifdef CONFIG_LOCAL_TIMERS + local_timer_register(&sirfsoc_local_timer_ops); +#endif +} + +/* initialize the kernel jiffy timer source */ +void __init sirfsoc_marco_timer_init(void) +{ + unsigned long rate; + u32 timer_div; + struct clk *clk; + + /* initialize clocking early, we want to set the OS timer */ + sirfsoc_of_clk_init(); + + /* timer's input clock is io clock */ + clk = clk_get_sys("io", NULL); + + BUG_ON(IS_ERR(clk)); + rate = clk_get_rate(clk); + + BUG_ON(rate < CLOCK_TICK_RATE); + BUG_ON(rate % CLOCK_TICK_RATE); + + sirfsoc_of_timer_map(); + + /* Initialize the timer dividers */ + timer_div = rate / CLOCK_TICK_RATE - 1; + writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); + writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL); + writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL); + + /* Initialize timer counters to 0 */ + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO); + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI); + writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | + BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0); + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_1); + + /* Clear all interrupts */ + writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); + + BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); + + BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); + + sirfsoc_clockevent_init(); +} + +static struct of_device_id timer_ids[] = { + { .compatible = "sirf,marco-tick" }, + {}, +}; + +static void __init sirfsoc_of_timer_map(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, timer_ids); + if (!np) + return; + sirfsoc_timer_base = of_iomap(np, 0); + if (!sirfsoc_timer_base) + panic("unable to map timer cpu registers\n"); + + sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0); + if (!sirfsoc_timer_irq.irq) + panic("No irq passed for timer0 via DT\n"); + +#ifdef CONFIG_LOCAL_TIMERS + sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1); + if (!sirfsoc_timer1_irq.irq) + panic("No irq passed for timer1 via DT\n"); +#endif + + of_node_put(np); +} diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer-prima2.c index d95bf25..6da584f 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer-prima2.c @@ -175,19 +175,13 @@ static u32 notrace sirfsoc_read_sched_clock(void) static void __init sirfsoc_clockevent_init(void) { - clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60); - - sirfsoc_clockevent.max_delta_ns = - clockevent_delta2ns(-2, &sirfsoc_clockevent); - sirfsoc_clockevent.min_delta_ns = - clockevent_delta2ns(2, &sirfsoc_clockevent); - sirfsoc_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&sirfsoc_clockevent); + clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE, + 2, -2); } /* initialize the kernel jiffy timer source */ -static void __init sirfsoc_timer_init(void) +void __init sirfsoc_prima2_timer_init(void) { unsigned long rate; struct clk *clk; @@ -233,7 +227,7 @@ static void __init sirfsoc_of_timer_map(void) np = of_find_matching_node(NULL, timer_ids); if (!np) - panic("unable to find compatible timer node in dtb\n"); + return; sirfsoc_timer_base = of_iomap(np, 0); if (!sirfsoc_timer_base) panic("unable to map timer cpu registers\n"); @@ -245,7 +239,3 @@ static void __init sirfsoc_of_timer_map(void) of_node_put(np); } - -struct sys_timer sirfsoc_timer = { - .init = sirfsoc_timer_init, -}; diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 2082293..2f71b3f 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -822,7 +822,7 @@ MACHINE_START(BALLOON3, "Balloon3") .nr_irqs = BALLOON3_NR_IRQS, .init_irq = balloon3_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = balloon3_init, .atag_offset = 0x100, .restart = pxa_restart, diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index 9a8760b..c092730 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -153,7 +153,7 @@ MACHINE_START(CAPC7117, .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = capc7117_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index a103c8f..bb99f59 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -520,7 +520,7 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX") .init_irq = cmx2xx_init_irq, /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */ .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = cmx2xx_init, #ifdef CONFIG_PCI .dma_zone_size = SZ_64M, diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index cc2b23a..8091aac 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -854,7 +854,7 @@ MACHINE_START(CM_X300, "CM-X300 module") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = cm_x300_init, .fixup = cm_x300_fixup, .restart = pxa_restart, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index b2f227d..5f9d930 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -313,7 +313,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END @@ -324,7 +324,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index a9c9c16..f1a1ac1 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -189,7 +189,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 25515cd..f6cc8b0 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -259,7 +259,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 7c83f52..a5b8fead 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -733,7 +733,7 @@ MACHINE_START(CORGI, "SHARP Corgi") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = corgi_restart, MACHINE_END #endif @@ -746,7 +746,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = corgi_restart, MACHINE_END #endif @@ -759,7 +759,7 @@ MACHINE_START(HUSKY, "SHARP Husky") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = corgi_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 7039f44..fadfff8 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -278,6 +278,6 @@ MACHINE_START(CSB726, "Cogent CSB726") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = csb726_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 1b64114..446563a 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1298,7 +1298,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = em_x270_init, .restart = pxa_restart, MACHINE_END @@ -1309,7 +1309,7 @@ MACHINE_START(EXEDA, "Compulab eXeda") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = em_x270_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index be2ee9b..8280ebc 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -195,7 +195,7 @@ MACHINE_START(E330, "Toshiba e330") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e330_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -246,7 +246,7 @@ MACHINE_START(E350, "Toshiba e350") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e350_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -370,7 +370,7 @@ MACHINE_START(E400, "Toshiba e400") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e400_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -566,7 +566,7 @@ MACHINE_START(E740, "Toshiba e740") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e740_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -765,7 +765,7 @@ MACHINE_START(E750, "Toshiba e750") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e750_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -977,7 +977,7 @@ MACHINE_START(E800, "Toshiba e800") .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e800_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index dc58fa0..dca1070 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -802,7 +802,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = a780_init, .restart = pxa_restart, MACHINE_END @@ -869,7 +869,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = e680_init, .restart = pxa_restart, MACHINE_END @@ -936,7 +936,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = a1200_init, .restart = pxa_restart, MACHINE_END @@ -1128,7 +1128,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = a910_init, .restart = pxa_restart, MACHINE_END @@ -1195,7 +1195,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = e6_init, .restart = pxa_restart, MACHINE_END @@ -1236,7 +1236,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2") .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = e2_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 42d5cca..fd7ea39 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -10,9 +10,8 @@ */ struct irq_data; -struct sys_timer; -extern struct sys_timer pxa_timer; +extern void pxa_timer_init(void); extern void __init pxa_map_io(void); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 60755a6..00b92da 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -238,7 +238,7 @@ MACHINE_START(GUMSTIX, "Gumstix") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = gumstix_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index e7dec58..875ec33 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -208,7 +208,7 @@ MACHINE_START(H5400, "HP iPAQ H5000") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = h5000_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index 2962de8..7a8d749 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -164,6 +164,6 @@ MACHINE_START(HIMALAYA, "HTC Himalaya") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = himalaya_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index e2c6391..133109e 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -900,6 +900,6 @@ MACHINE_START(H4700, "HP iPAQ HX4700") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = hx4700_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 1d02eab..fe31bfc 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -196,7 +196,7 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = icontrol_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 64507cd..343c4e3 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -279,7 +279,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = idp_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h index 2d3f14e..714b657 100644 --- a/arch/arm/mach-pxa/include/mach/palmtreo.h +++ b/arch/arm/mach-pxa/include/mach/palmtreo.h @@ -38,13 +38,14 @@ #define GPIO_NR_TREO_LCD_POWER 25 /* Treo680 specific GPIOs */ -#ifdef CONFIG_MACH_TREO680 #define GPIO_NR_TREO680_SD_READONLY 33 #define GPIO_NR_TREO680_SD_POWER 42 #define GPIO_NR_TREO680_VIBRATE_EN 44 #define GPIO_NR_TREO680_KEYB_BL 24 #define GPIO_NR_TREO680_BT_EN 43 -#endif /* CONFIG_MACH_TREO680 */ +#define GPIO_NR_TREO680_LCD_POWER 77 +#define GPIO_NR_TREO680_LCD_EN 86 +#define GPIO_NR_TREO680_LCD_EN_N 25 /* Centro685 specific GPIOs */ #define GPIO_NR_CENTRO_SD_POWER 21 diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h index b7de471..b802f285 100644 --- a/arch/arm/mach-pxa/include/mach/smemc.h +++ b/arch/arm/mach-pxa/include/mach/smemc.h @@ -37,6 +37,7 @@ #define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */ #define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */ #define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */ +#define CSMSADRCFG (SMEMC_VIRT + 0xA0) /* Chip Select Configuration Register */ /* * More handy macros for PCMCIA diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 5519a34..8c27757 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -72,8 +72,3 @@ static inline void arch_decomp_setup(void) uart_is_pxa = 0; } } - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 402874f..e848c46 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -443,7 +443,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto .nr_irqs = LITTLETON_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = littleton_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 1a63eaa..1255ee0 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -503,7 +503,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") .nr_irqs = LPD270_NR_IRQS, .init_irq = lpd270_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = lpd270_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 553056d..d8a1be6 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -650,7 +650,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") .nr_irqs = LUBBOCK_NR_IRQS, .init_irq = lubbock_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = lubbock_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index f792240..f44532f 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -774,6 +774,6 @@ MACHINE_START(MAGICIAN, "HTC Magician") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = magician_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index f27a61e..7a12c1b 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -714,7 +714,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") .nr_irqs = MAINSTONE_NR_IRQS, .init_irq = mainstone_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = mainstone_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 2831308..f8979b94 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -762,6 +762,6 @@ MACHINE_START(MIOA701, "MIO A701") .init_irq = &pxa27x_init_irq, .handle_irq = &pxa27x_handle_irq, .init_machine = mioa701_machine_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = mioa701_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 152efbf..854f1f5 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -93,7 +93,7 @@ static void __init mp900c_init(void) /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */ MACHINE_START(NEC_MP900, "MobilePro900/C") .atag_offset = 0x220100, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .map_io = pxa25x_map_io, .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 8bcc96e..909b713 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -347,7 +347,7 @@ MACHINE_START(PALMLD, "Palm LifeDrive") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmld_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 5ca7b90..5033fd0 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -208,7 +208,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmt5_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index ca924cf..100b176f 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -542,7 +542,7 @@ MACHINE_START(PALMTC, "Palm Tungsten|C") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmtc_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 32e0d79..0742721 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -363,7 +363,7 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmte2_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 3f3c48f..d82a50b 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -98,9 +98,6 @@ static unsigned long treo_pin_config[] __initdata = { GPIO96_KP_MKOUT_6, GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */ - /* LCD */ - GPIOxx_LCD_TFT_16BPP, - /* Quick Capture Interface */ GPIO84_CIF_FV, GPIO85_CIF_LV, @@ -140,6 +137,12 @@ static unsigned long treo680_pin_config[] __initdata = { /* MATRIX KEYPAD - different wake up source */ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, GPIO99_KP_MKIN_5, + + /* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */ + GPIOxx_LCD_16BPP, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, }; #endif /* CONFIG_MACH_TREO680 */ @@ -155,13 +158,16 @@ static unsigned long centro685_pin_config[] __initdata = { /* MATRIX KEYPAD - different wake up source */ GPIO100_KP_MKIN_0, GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, + + /* LCD */ + GPIOxx_LCD_TFT_16BPP, }; #endif /* CONFIG_MACH_CENTRO */ /****************************************************************************** * GPIO keyboard ******************************************************************************/ -#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_PXA27x) static unsigned int treo680_matrix_keys[] = { KEY(0, 0, KEY_F8), /* Red/Off/Power */ KEY(0, 1, KEY_LEFT), @@ -309,7 +315,7 @@ static inline void palmtreo_kpc_init(void) {} /****************************************************************************** * USB host ******************************************************************************/ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_OHCI_HCD) static struct pxaohci_platform_data treo680_ohci_info = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT1 | ENABLE_PORT3, @@ -328,7 +334,6 @@ static inline void palmtreo_uhc_init(void) {} /****************************************************************************** * Vibra and LEDs ******************************************************************************/ -#ifdef CONFIG_MACH_TREO680 static struct gpio_led treo680_gpio_leds[] = { { .name = "treo680:vibra:vibra", @@ -379,20 +384,46 @@ static struct gpio_led_platform_data centro_gpio_led_info = { static struct platform_device palmtreo_leds = { .name = "leds-gpio", .id = -1, - .dev = { - .platform_data = &treo680_gpio_led_info, - } }; static void __init palmtreo_leds_init(void) { if (machine_is_centro()) palmtreo_leds.dev.platform_data = ¢ro_gpio_led_info; + else if (machine_is_treo680()) + palmtreo_leds.dev.platform_data = &treo680_gpio_led_info; platform_device_register(&palmtreo_leds); } + +/****************************************************************************** + * diskonchip docg4 flash + ******************************************************************************/ +#if defined(CONFIG_MACH_TREO680) +/* REVISIT: does the centro have this device also? */ +#if IS_ENABLED(CONFIG_MTD_NAND_DOCG4) +static struct resource docg4_resources[] = { + { + .start = 0x00000000, + .end = 0x00001FFF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device treo680_docg4_flash = { + .name = "docg4", + .id = -1, + .resource = docg4_resources, + .num_resources = ARRAY_SIZE(docg4_resources), +}; + +static void __init treo680_docg4_flash_init(void) +{ + platform_device_register(&treo680_docg4_flash); +} #else -static inline void palmtreo_leds_init(void) {} +static inline void treo680_docg4_flash_init(void) {} +#endif #endif /****************************************************************************** @@ -424,12 +455,62 @@ static void __init palmphone_common_init(void) } #ifdef CONFIG_MACH_TREO680 +void __init treo680_gpio_init(void) +{ + unsigned int gpio; + + /* drive all three lcd gpios high initially */ + const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT; + + /* + * LCD GPIO initialization... + */ + + /* + * This is likely the power to the lcd. Toggling it low/high appears to + * turn the lcd off/on. Can be toggled after lcd is initialized without + * any apparent adverse effects to the lcd operation. Note that this + * gpio line is used by the lcd controller as the L_BIAS signal, but + * treo680 configures it as gpio. + */ + gpio = GPIO_NR_TREO680_LCD_POWER; + if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0) + goto fail; + + /* + * These two are called "enables", for lack of a better understanding. + * If either of these are toggled after the lcd is initialized, the + * image becomes degraded. N.B. The IPL shipped with the treo + * configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high. If + * the IPL is ever reprogrammed, this initialization may be need to be + * revisited. + */ + gpio = GPIO_NR_TREO680_LCD_EN; + if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0) + goto fail; + gpio = GPIO_NR_TREO680_LCD_EN_N; + if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0) + goto fail; + + /* driving this low turns LCD on */ + gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0); + + return; + fail: + pr_err("gpio %d initialization failed\n", gpio); + gpio_free(GPIO_NR_TREO680_LCD_POWER); + gpio_free(GPIO_NR_TREO680_LCD_EN); + gpio_free(GPIO_NR_TREO680_LCD_EN_N); +} + static void __init treo680_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config)); palmphone_common_init(); + treo680_gpio_init(); palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY, GPIO_NR_TREO680_SD_POWER, 0); + treo680_docg4_flash_init(); } #endif @@ -451,7 +532,7 @@ MACHINE_START(TREO680, "Palm Treo 680") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = treo680_init, .restart = pxa_restart, MACHINE_END @@ -465,7 +546,7 @@ MACHINE_START(CENTRO, "Palm Centro 685") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = centro_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 8b43666..627c93a 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -366,7 +366,7 @@ MACHINE_START(PALMTX, "Palm T|X") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmtx_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 8cdd4f5..18b7fcd 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -404,7 +404,7 @@ MACHINE_START(PALMZ72, "Palm Zire72") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = palmz72_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index fe90544..69918c7 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -263,7 +263,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") .nr_irqs = PCM027_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = pcm027_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 2910bb9..50ccd5f 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -469,7 +469,7 @@ MACHINE_START(POODLE, "SHARP Poodle") .nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */ .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = poodle_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c index c9192ce..3835979 100644 --- a/arch/arm/mach-pxa/pxa-dt.c +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -55,7 +55,7 @@ DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)") .map_io = pxa3xx_map_io, .init_irq = pxa3xx_dt_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, .init_machine = pxa3xx_dt_init, .dt_compat = pxa3xx_dt_board_compat, diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 616cb87..3203a9f 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -53,17 +53,25 @@ static unsigned long ac97_reset_config[] = { GPIO95_AC97_nRESET, }; -void pxa27x_assert_ac97reset(int reset_gpio, int on) +void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio) { + /* + * This helper function is used to work around a bug in the pxa27x's + * ac97 controller during a warm reset. The configuration of the + * reset_gpio is changed as follows: + * to_gpio == true: configured to generic output gpio and driven high + * to_gpio == false: configured to ac97 controller alt fn AC97_nRESET + */ + if (reset_gpio == 113) - pxa2xx_mfp_config(on ? &ac97_reset_config[0] : - &ac97_reset_config[1], 1); + pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[0] : + &ac97_reset_config[1], 1); if (reset_gpio == 95) - pxa2xx_mfp_config(on ? &ac97_reset_config[2] : - &ac97_reset_config[3], 1); + pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[2] : + &ac97_reset_config[3], 1); } -EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset); +EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset); /* Crystal clock: 13MHz */ #define BASE_CLK 13000000 @@ -230,6 +238,7 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 25b08bfa..af41888 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -1095,7 +1095,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -1108,7 +1108,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif @@ -1121,7 +1121,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 08d87a5..710c493 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -601,7 +601,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = saar_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index 7992305..f38aa89 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -40,6 +40,8 @@ static void pxa3xx_smemc_resume(void) __raw_writel(csadrcfg[1], CSADRCFG1); __raw_writel(csadrcfg[2], CSADRCFG2); __raw_writel(csadrcfg[3], CSADRCFG3); + /* CSMSADRCFG wakes up in its default state (0), so we need to set it */ + __raw_writel(0x2, CSMSADRCFG); } static struct syscore_ops smemc_syscore_ops = { @@ -49,8 +51,19 @@ static struct syscore_ops smemc_syscore_ops = { static int __init smemc_init(void) { - if (cpu_is_pxa3xx()) + if (cpu_is_pxa3xx()) { + /* + * The only documentation we have on the + * Chip Select Configuration Register (CSMSADRCFG) is that + * it must be programmed to 0x2. + * Moreover, in the bit definitions, the second bit + * (CSMSADRCFG[1]) is called "SETALWAYS". + * Other bits are reserved in this register. + */ + __raw_writel(0x2, CSMSADRCFG); + register_syscore_ops(&smemc_syscore_ops); + } return 0; } diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 2073f0e..362726c 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -732,7 +732,7 @@ static inline void spitz_lcd_init(void) {} #endif /****************************************************************************** - * Framebuffer + * NAND Flash ******************************************************************************/ #if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE) static struct mtd_partition spitz_nand_partitions[] = { @@ -858,7 +858,7 @@ static inline void spitz_nor_init(void) {} #endif /****************************************************************************** - * GPIO expander + * I2C devices ******************************************************************************/ #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) static struct pca953x_platform_data akita_pca953x_pdata = { @@ -986,7 +986,7 @@ MACHINE_START(SPITZ, "SHARP Spitz") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = spitz_restart, MACHINE_END #endif @@ -1000,7 +1000,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = spitz_restart, MACHINE_END #endif @@ -1014,7 +1014,7 @@ MACHINE_START(AKITA, "SHARP Akita") .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = spitz_restart, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 456560b..88fde43 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -1006,7 +1006,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = imote2_init, .atag_offset = 0x100, .restart = pxa_restart, @@ -1019,7 +1019,7 @@ MACHINE_START(STARGATE2, "Stargate 2") .nr_irqs = STARGATE_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = stargate2_init, .atag_offset = 0x100, .restart = pxa_restart, diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 1a25f8a..f55979c 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -494,7 +494,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = tavorevb_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 4bc47d6..8f1ee92 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -89,48 +89,10 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) } } -static struct clock_event_device ckevt_pxa_osmr0 = { - .name = "osmr0", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = pxa_osmr0_set_next_event, - .set_mode = pxa_osmr0_set_mode, -}; - -static struct irqaction pxa_ost0_irq = { - .name = "ost0", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = pxa_ost0_interrupt, - .dev_id = &ckevt_pxa_osmr0, -}; - -static void __init pxa_timer_init(void) -{ - unsigned long clock_tick_rate = get_clock_tick_rate(); - - writel_relaxed(0, OIER); - writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); - - setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate); - - clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4); - ckevt_pxa_osmr0.max_delta_ns = - clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); - ckevt_pxa_osmr0.min_delta_ns = - clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1; - ckevt_pxa_osmr0.cpumask = cpumask_of(0); - - setup_irq(IRQ_OST0, &pxa_ost0_irq); - - clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32, - clocksource_mmio_readl_up); - clockevents_register_device(&ckevt_pxa_osmr0); -} - #ifdef CONFIG_PM static unsigned long osmr[4], oier, oscr; -static void pxa_timer_suspend(void) +static void pxa_timer_suspend(struct clock_event_device *cedev) { osmr[0] = readl_relaxed(OSMR0); osmr[1] = readl_relaxed(OSMR1); @@ -140,7 +102,7 @@ static void pxa_timer_suspend(void) oscr = readl_relaxed(OSCR); } -static void pxa_timer_resume(void) +static void pxa_timer_resume(struct clock_event_device *cedev) { /* * Ensure that we have at least MIN_OSCR_DELTA between match @@ -163,8 +125,38 @@ static void pxa_timer_resume(void) #define pxa_timer_resume NULL #endif -struct sys_timer pxa_timer = { - .init = pxa_timer_init, +static struct clock_event_device ckevt_pxa_osmr0 = { + .name = "osmr0", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_next_event = pxa_osmr0_set_next_event, + .set_mode = pxa_osmr0_set_mode, .suspend = pxa_timer_suspend, .resume = pxa_timer_resume, }; + +static struct irqaction pxa_ost0_irq = { + .name = "ost0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = pxa_ost0_interrupt, + .dev_id = &ckevt_pxa_osmr0, +}; + +void __init pxa_timer_init(void) +{ + unsigned long clock_tick_rate = get_clock_tick_rate(); + + writel_relaxed(0, OIER); + writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); + + setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate); + + ckevt_pxa_osmr0.cpumask = cpumask_of(0); + + setup_irq(IRQ_OST0, &pxa_ost0_irq); + + clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32, + clocksource_mmio_readl_up); + clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate, + MIN_OSCR_DELTA * 2, 0x7fffffff); +} diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 233629e..3d91d2e 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -927,8 +927,6 @@ static void tosa_restart(char mode, const char *cmd) static void __init tosa_init(void) { - int dummy; - pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config)); pxa_set_ffuart_info(NULL); @@ -947,10 +945,6 @@ static void __init tosa_init(void) /* enable batt_fault */ PMCR = 0x01; - dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12); - dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12); - dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); - pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_ficp_info(&tosa_ficp_platform_data); pxa_set_i2c_info(NULL); @@ -982,6 +976,6 @@ MACHINE_START(TOSA, "SHARP Tosa") .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_machine = tosa_init, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = tosa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index fbbcbed..c580434 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -561,7 +561,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END @@ -573,6 +573,6 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index c773e4d..9c363c0 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -997,7 +997,7 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") .nr_irqs = PXA_NR_IRQS, .init_irq = viper_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = viper_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 491b6c9..aa89488 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -719,7 +719,7 @@ MACHINE_START(VPAC270, "Voipac PXA270") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = vpac270_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 4275713..13b1d45 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -185,7 +185,7 @@ MACHINE_START(XCEP, "Iskratel XCEP") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 97529fa..989903a 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -722,7 +722,7 @@ MACHINE_START(ZIPIT2, "Zipit Z2") .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = z2_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index abd3aa1..f5d4364 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -910,7 +910,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") .nr_irqs = ZEUS_NR_IRQS, .init_irq = zeus_init_irq, .handle_irq = pxa27x_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = zeus_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 226279f..1f00d65 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -428,7 +428,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") .nr_irqs = ZYLONITE_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, + .init_time = pxa_timer_init, .init_machine = zylonite_init, .restart = pxa_restart, MACHINE_END diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 6824674..1d5ee5c 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -42,7 +42,6 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <asm/hardware/gic.h> #include <mach/platform.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h index 8305037..cfa30d2 100644 --- a/arch/arm/mach-realview/include/mach/uncompress.h +++ b/arch/arm/mach-realview/include/mach/uncompress.h @@ -75,4 +75,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 300f706..98e3052 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -14,7 +14,6 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/smp_scu.h> @@ -59,8 +58,6 @@ static void __init realview_smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init realview_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 28511d4..5b1c8bf 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -27,13 +27,13 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-realview.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/pgtable.h> -#include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/smp_twd.h> @@ -418,10 +418,6 @@ static void __init realview_eb_timer_init(void) realview_eb_twd_init(); } -static struct sys_timer realview_eb_timer = { - .init = realview_eb_timer_init, -}; - static void realview_eb_restart(char mode, const char *cmd) { void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); @@ -472,8 +468,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .map_io = realview_eb_map_io, .init_early = realview_init_early, .init_irq = gic_init_irq, - .timer = &realview_eb_timer, - .handle_irq = gic_handle_irq, + .init_time = realview_eb_timer_init, .init_machine = realview_eb_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 07d6672..d5e83a1 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -29,13 +29,13 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-realview.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/pgtable.h> -#include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> @@ -329,10 +329,6 @@ static void __init realview_pb1176_timer_init(void) realview_timer_init(IRQ_DC1176_TIMER0); } -static struct sys_timer realview_pb1176_timer = { - .init = realview_pb1176_timer_init, -}; - static void realview_pb1176_restart(char mode, const char *cmd) { void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); @@ -384,8 +380,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .map_io = realview_pb1176_map_io, .init_early = realview_init_early, .init_irq = gic_init_irq, - .timer = &realview_pb1176_timer, - .handle_irq = gic_handle_irq, + .init_time = realview_pb1176_timer_init, .init_machine = realview_pb1176_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 7ed53d7..c3cfe21 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -27,13 +27,13 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-realview.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/pgtable.h> -#include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/smp_twd.h> @@ -316,10 +316,6 @@ static void __init realview_pb11mp_timer_init(void) realview_pb11mp_twd_init(); } -static struct sys_timer realview_pb11mp_timer = { - .init = realview_pb11mp_timer_init, -}; - static void realview_pb11mp_restart(char mode, const char *cmd) { void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); @@ -367,8 +363,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .map_io = realview_pb11mp_map_io, .init_early = realview_init_early, .init_irq = gic_init_irq, - .timer = &realview_pb11mp_timer, - .handle_irq = gic_handle_irq, + .init_time = realview_pb11mp_timer_init, .init_machine = realview_pb11mp_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 9992431..dde652a 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -27,12 +27,12 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-realview.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/pgtable.h> -#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -264,10 +264,6 @@ static void __init realview_pba8_timer_init(void) realview_timer_init(IRQ_PBA8_TIMER0_1); } -static struct sys_timer realview_pba8_timer = { - .init = realview_pba8_timer_init, -}; - static void realview_pba8_restart(char mode, const char *cmd) { void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); @@ -308,8 +304,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .map_io = realview_pba8_map_io, .init_early = realview_init_early, .init_irq = gic_init_irq, - .timer = &realview_pba8_timer, - .handle_irq = gic_handle_irq, + .init_time = realview_pba8_timer_init, .init_machine = realview_pba8_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 4f486f0..54f0185 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -26,13 +26,13 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-realview.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <asm/smp_twd.h> #include <asm/pgtable.h> -#include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> @@ -324,10 +324,6 @@ static void __init realview_pbx_timer_init(void) realview_pbx_twd_init(); } -static struct sys_timer realview_pbx_timer = { - .init = realview_pbx_timer_init, -}; - static void realview_pbx_fixup(struct tag *tags, char **from, struct meminfo *meminfo) { @@ -404,8 +400,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .map_io = realview_pbx_map_io, .init_early = realview_init_early, .init_irq = gic_init_irq, - .timer = &realview_pbx_timer, - .handle_irq = gic_handle_irq, + .init_time = realview_pbx_timer_init, .init_machine = realview_pbx_init, #ifdef CONFIG_ZONE_DMA .dma_zone_size = SZ_256M, diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h index 9cd9bcd..0fd4b0b 100644 --- a/arch/arm/mach-rpc/include/mach/uncompress.h +++ b/arch/arm/mach-rpc/include/mach/uncompress.h @@ -189,8 +189,3 @@ static void arch_decomp_setup(void) if (nr_pages * page_size < 4096*1024) error("<4M of mem\n"); } #endif - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index f3fa259c..a302cf5 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -211,7 +211,7 @@ static void rpc_restart(char mode, const char *cmd) soft_restart(0); } -extern struct sys_timer ioc_timer; +void ioc_timer_init(void); MACHINE_START(RISCPC, "Acorn-RiscPC") /* Maintainer: Russell King */ @@ -220,6 +220,6 @@ MACHINE_START(RISCPC, "Acorn-RiscPC") .reserve_lp1 = 1, .map_io = rpc_map_io, .init_irq = rpc_init_irq, - .timer = &ioc_timer, + .init_time = ioc_timer_init, .restart = rpc_restart, MACHINE_END diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c index 581fca9..9a6def1 100644 --- a/arch/arm/mach-rpc/time.c +++ b/arch/arm/mach-rpc/time.c @@ -24,7 +24,7 @@ #include <asm/mach/time.h> -unsigned long ioc_timer_gettimeoffset(void) +static u32 ioc_timer_gettimeoffset(void) { unsigned int count1, count2, status; long offset; @@ -56,7 +56,7 @@ unsigned long ioc_timer_gettimeoffset(void) } offset = (LATCH - offset) * (tick_nsec / 1000); - return (offset + LATCH/2) / LATCH; + return ((offset + LATCH/2) / LATCH) * 1000; } void __init ioctime_init(void) @@ -82,14 +82,9 @@ static struct irqaction ioc_timer_irq = { /* * Set up timer interrupt. */ -static void __init ioc_timer_init(void) +void __init ioc_timer_init(void) { + arch_gettimeoffset = ioc_timer_gettimeoffset; ioctime_init(); setup_irq(IRQ_TIMER0, &ioc_timer_irq); } - -struct sys_timer ioc_timer = { - .init = ioc_timer_init, - .offset = ioc_timer_gettimeoffset, -}; - diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig deleted file mode 100644 index 68d89cb..0000000 --- a/arch/arm/mach-s3c2410/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -# cpu frequency scaling support - -config S3C2410_CPUFREQ - bool - depends on CPU_FREQ_S3C24XX && CPU_S3C2410 - select S3C2410_CPUFREQ_UTILS - help - CPU Frequency scaling support for S3C2410 - -config S3C2410_PLLTABLE - bool - depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL - default y - help - Select the PLL table for the S3C2410 - diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile deleted file mode 100644 index 6b9a316..0000000 --- a/arch/arm/mach-s3c2410/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# arch/arm/mach-s3c2410/Makefile -# -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o -obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o - diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig deleted file mode 100644 index 495f692..0000000 --- a/arch/arm/mach-s3c2412/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -# Note, the S3C2412 IOtiming support is in plat-s3c24xx - -config S3C2412_CPUFREQ - bool - depends on CPU_FREQ_S3C24XX && CPU_S3C2412 - default y - select S3C2412_IOTIMING - help - CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile deleted file mode 100644 index 41a6c27..0000000 --- a/arch/arm/mach-s3c2412/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# arch/arm/mach-s3c2412/Makefile -# -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c deleted file mode 100644 index 4526f6b..0000000 --- a/arch/arm/mach-s3c2412/gpio.c +++ /dev/null @@ -1,62 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/gpio.c - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * http://armlinux.simtec.co.uk/. - * - * S3C2412/S3C2413 specific GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/regs-gpio.h> -#include <mach/hardware.h> - -#include <plat/gpio-core.h> - -int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) -{ - struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); - unsigned long offs = pin - chip->chip.base; - unsigned long flags; - unsigned long slpcon; - - offs *= 2; - - if (pin < S3C2410_GPB(0)) - return -EINVAL; - - if (pin >= S3C2410_GPF(0) && - pin <= S3C2410_GPG(16)) - return -EINVAL; - - if (pin > S3C2410_GPH(16)) - return -EINVAL; - - local_irq_save(flags); - - slpcon = __raw_readl(chip->base + 0x0C); - - slpcon &= ~(3 << offs); - slpcon |= state << offs; - - __raw_writel(slpcon, chip->base + 0x0C); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg); diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig deleted file mode 100644 index a4d7fd2..0000000 --- a/arch/arm/mach-s3c2440/Kconfig +++ /dev/null @@ -1,37 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -config S3C2440_CPUFREQ - bool "S3C2440/S3C2442 CPU Frequency scaling support" - depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) - default y - select S3C2410_CPUFREQ_UTILS - help - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. - -config S3C2440_XTAL_12000000 - bool - help - Indicate that the build needs to support 12MHz system - crystal. - -config S3C2440_XTAL_16934400 - bool - help - Indicate that the build needs to support 16.9344MHz system - crystal. - -config S3C2440_PLL_12000000 - bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 - default y if CPU_FREQ_S3C24XX_PLL - help - PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. - -config S3C2440_PLL_16934400 - bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 - default y if CPU_FREQ_S3C24XX_PLL - help - PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile deleted file mode 100644 index c460924..0000000 --- a/arch/arm/mach-s3c2440/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# arch/arm/mach-s3c2440/Makefile -# -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_CPU_S3C2440) += dsc.o - -obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o - -obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o -obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c deleted file mode 100644 index 9ea66e3..0000000 --- a/arch/arm/mach-s3c2440/dsc.c +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/dsc.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Samsung S3C2440 Drive Strength Control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/io.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> -#include <mach/regs-dsc.h> - -#include <plat/cpu.h> -#include <plat/s3c244x.h> - -int s3c2440_set_dsc(unsigned int pin, unsigned int value) -{ - void __iomem *base; - unsigned long val; - unsigned long flags; - unsigned long mask; - - base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0; - mask = 3 << S3C2440_DSC_GETSHIFT(pin); - - local_irq_save(flags); - - val = __raw_readl(base); - val &= ~mask; - val |= value & mask; - __raw_writel(val, base); - - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(s3c2440_set_dsc); diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 25df14a..37f513d 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -9,6 +9,15 @@ if ARCH_S3C24XX +config PLAT_S3C24XX + def_bool y + select ARCH_REQUIRE_GPIOLIB + select NO_IOPORT + select S3C_DEV_NAND + select IRQ_DOMAIN + help + Base platform code for any Samsung S3C24XX device + menu "SAMSUNG S3C24XX SoCs Support" comment "S3C24XX SoCs" @@ -83,6 +92,17 @@ config CPU_S3C2443 # common code +config S3C2410_CLOCK + bool + help + Clock code for the S3C2410, and similar processors which + is currently includes the S3C2410, S3C2440, S3C2442. + +config S3C24XX_DCLK + bool + help + Clock code for supporting DCLK/CLKOUT on S3C24XX architectures + config S3C24XX_SMDK bool help @@ -111,6 +131,22 @@ config S3C24XX_SETUP_TS help Compile in platform device definition for Samsung TouchScreen. +config S3C24XX_DMA + bool "S3C2410 DMA support" + depends on ARCH_S3C24XX + select S3C_DMA + help + S3C2410 DMA support. This is needed for drivers like sound which + use the S3C2410's DMA system to move data to and from the + peripheral blocks. + +config S3C2410_DMA_DEBUG + bool "S3C2410 DMA support debug" + depends on ARCH_S3C24XX && S3C2410_DMA + help + Enable debugging output for the DMA code. This option sends info + to the kernel log, at priority KERN_DEBUG. + config S3C2410_DMA bool depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) @@ -123,10 +159,92 @@ config S3C2410_PM help Power Management code common to S3C2410 and better +# low-level serial option nodes + +config CPU_LLSERIAL_S3C2410_ONLY + bool + default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 + +config CPU_LLSERIAL_S3C2440_ONLY + bool + default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 + +config CPU_LLSERIAL_S3C2410 + bool + help + Selected if there is an S3C2410 (or register compatible) serial + low-level implementation needed + +config CPU_LLSERIAL_S3C2440 + bool + help + Selected if there is an S3C2440 (or register compatible) serial + low-level implementation needed + +# gpio configurations + +config S3C24XX_GPIO_EXTRA + int + default 128 if S3C24XX_GPIO_EXTRA128 + default 64 if S3C24XX_GPIO_EXTRA64 + default 16 if ARCH_H1940 + default 0 + +config S3C24XX_GPIO_EXTRA64 + bool + help + Add an extra 64 gpio numbers to the available GPIO pool. This is + available for boards that need extra gpios for external devices. + +config S3C24XX_GPIO_EXTRA128 + bool + help + Add an extra 128 gpio numbers to the available GPIO pool. This is + available for boards that need extra gpios for external devices. + +# cpu frequency items common between s3c2410 and s3c2440/s3c2442 + +config S3C2410_IOTIMING + bool + depends on CPU_FREQ_S3C24XX + help + Internal node to select io timing code that is common to the s3c2410 + and s3c2440/s3c2442 cpu frequency support. + +config S3C2410_CPUFREQ_UTILS + bool + depends on CPU_FREQ_S3C24XX + help + Internal node to select timing code that is common to the s3c2410 + and s3c2440/s3c244 cpu frequency support. + +# cpu frequency support common to s3c2412, s3c2413 and s3c2442 + +config S3C2412_IOTIMING + bool + depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443) + help + Intel node to select io timing code that is common to the s3c2412 + and the s3c2443. + # cpu-specific sections if CPU_S3C2410 +config S3C2410_CPUFREQ + bool + depends on CPU_FREQ_S3C24XX && CPU_S3C2410 + select S3C2410_CPUFREQ_UTILS + help + CPU Frequency scaling support for S3C2410 + +config S3C2410_PLL + bool + depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL + default y + help + Select the PLL table for the S3C2410 + config S3C24XX_SIMTEC_NOR bool help @@ -226,6 +344,7 @@ config MACH_QT2410 config ARCH_SMDK2410 bool "SMDK2410/A9M2410" select S3C24XX_SMDK + select S3C_DEV_USB_HOST help Say Y here if you are using the SMDK2410 or the derived module A9M2410 <http://www.fsforth.de> @@ -266,6 +385,14 @@ config CPU_S3C2412_ONLY !CPU_S3C2443 && CPU_S3C2412 default y +config S3C2412_CPUFREQ + bool + depends on CPU_FREQ_S3C24XX && CPU_S3C2412 + default y + select S3C2412_IOTIMING + help + CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. + config S3C2412_DMA bool help @@ -273,6 +400,7 @@ config S3C2412_DMA config S3C2412_PM bool + select S3C2412_PM_SLEEP help Internal config node to apply S3C2412 power management @@ -291,8 +419,8 @@ config MACH_JIVE Say Y here if you are using the Logitech Jive. config MACH_JIVE_SHOW_BOOTLOADER - bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)" - depends on MACH_JIVE && EXPERIMENTAL + bool "Allow access to bootloader partitions in MTD" + depends on MACH_JIVE config MACH_S3C2413 bool @@ -365,11 +493,45 @@ endif # CPU_S3C2416 if CPU_S3C2440 +config S3C2440_CPUFREQ + bool "S3C2440/S3C2442 CPU Frequency scaling support" + depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) + default y + select S3C2410_CPUFREQ_UTILS + help + CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. + config S3C2440_DMA bool help Support for S3C2440 specific DMA code5A +config S3C2440_XTAL_12000000 + bool + help + Indicate that the build needs to support 12MHz system + crystal. + +config S3C2440_XTAL_16934400 + bool + help + Indicate that the build needs to support 16.9344MHz system + crystal. + +config S3C2440_PLL_12000000 + bool + depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 + default y if CPU_FREQ_S3C24XX_PLL + help + PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. + +config S3C2440_PLL_16934400 + bool + depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 + default y if CPU_FREQ_S3C24XX_PLL + help + PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. + comment "S3C2440 Boards" # diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 0ab6ab1..af53d27 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -14,26 +14,32 @@ obj- := # core -obj-y += common.o +obj-y += common.o irq.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o +obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o +obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o +obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o +obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o +obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o +obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o clock-s3c2443.o # PM @@ -41,9 +47,21 @@ obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o # common code +obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o +obj-$(CONFIG_S3C24XX_DMA) += dma.o + +obj-$(CONFIG_S3C2410_CLOCK) += clock-s3c2410.o +obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o + +obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o +obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o + obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o +obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpufreq.o +obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o + # # machine support # following is ordered alphabetically by option text. diff --git a/arch/arm/mach-s3c24xx/anubis.h b/arch/arm/mach-s3c24xx/anubis.h new file mode 100644 index 0000000..2691665 --- /dev/null +++ b/arch/arm/mach-s3c24xx/anubis.h @@ -0,0 +1,53 @@ +/* + * Copyright (c) 2005 Simtec Electronics + * http://www.simtec.co.uk/products/ + * Ben Dooks <ben@simtec.co.uk> + * + * ANUBIS - CPLD control constants + * ANUBIS - IRQ Number definitions + * ANUBIS - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_S3C24XX_ANUBIS_H +#define __MACH_S3C24XX_ANUBIS_H __FILE__ + +/* CTRL2 - NAND WP control, IDE Reset assert/check */ + +#define ANUBIS_CTRL1_NANDSEL (0x3) + +/* IDREG - revision */ + +#define ANUBIS_IDREG_REVMASK (0x7) + +/* irq */ + +#define ANUBIS_IRQ_IDE0 IRQ_EINT2 +#define ANUBIS_IRQ_IDE1 IRQ_EINT3 +#define ANUBIS_IRQ_ASIX IRQ_EINT1 + +/* map */ + +/* start peripherals off after the S3C2410 */ + +#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000)) + +#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) +#define ANUBIS_PA_CTRL1 ANUBIS_PA_CPLD + +#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) +#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3 << 23)) + +#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000) +#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000) +#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000) +#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000) + +#endif /* __MACH_S3C24XX_ANUBIS_H */ diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c index ba02cf8..3f0288f 100644 --- a/arch/arm/mach-s3c24xx/bast-ide.c +++ b/arch/arm/mach-s3c24xx/bast-ide.c @@ -25,8 +25,8 @@ #include <asm/mach/irq.h> #include <mach/map.h> -#include <mach/bast-map.h> -#include <mach/bast-irq.h> + +#include "bast.h" /* IDE ports */ @@ -34,12 +34,10 @@ static struct pata_platform_info bast_ide_platdata = { .ioport_shift = 5, }; -#define IDE_CS S3C2410_CS5 - static struct resource bast_ide0_resource[] = { - [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRI, 8 * 0x20), - [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20), - [2] = DEFINE_RES_IRQ(IRQ_IDE0), + [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20), + [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20), + [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0), }; static struct platform_device bast_device_ide0 = { @@ -55,9 +53,9 @@ static struct platform_device bast_device_ide0 = { }; static struct resource bast_ide1_resource[] = { - [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESEC, 8 * 0x20), - [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20), - [2] = DEFINE_RES_IRQ(IRQ_IDE1), + [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20), + [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20), + [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1), }; static struct platform_device bast_device_ide1 = { diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c index ac7b2ad..c0daa95 100644 --- a/arch/arm/mach-s3c24xx/bast-irq.c +++ b/arch/arm/mach-s3c24xx/bast-irq.c @@ -27,27 +27,20 @@ #include <linux/device.h> #include <linux/io.h> -#include <asm/mach-types.h> - -#include <mach/hardware.h> #include <asm/irq.h> - +#include <asm/mach-types.h> #include <asm/mach/irq.h> +#include <mach/hardware.h> #include <mach/regs-irq.h> -#include <mach/bast-map.h> -#include <mach/bast-irq.h> #include <plat/irq.h> -#if 0 -#include <asm/debug-ll.h> -#endif +#include "bast.h" #define irqdbf(x...) #define irqdbf2(x...) - /* handle PC104 ISA interrupts from the system CPLD */ /* table of ISA irq nos to the relevant mask... zero means @@ -87,7 +80,7 @@ bast_pc104_mask(struct irq_data *data) static void bast_pc104_maskack(struct irq_data *data) { - struct irq_desc *desc = irq_desc + IRQ_ISA; + struct irq_desc *desc = irq_desc + BAST_IRQ_ISA; bast_pc104_mask(data); desc->irq_data.chip->irq_ack(&desc->irq_data); @@ -122,7 +115,7 @@ bast_irq_pc104_demux(unsigned int irq, if (unlikely(stat == 0)) { /* ack if we get an irq with nothing (ie, startup) */ - desc = irq_desc + IRQ_ISA; + desc = irq_desc + BAST_IRQ_ISA; desc->irq_data.chip->irq_ack(&desc->irq_data); } else { /* handle the IRQ */ @@ -147,7 +140,7 @@ static __init int bast_irq_init(void) __raw_writeb(0x0, BAST_VA_PC104_IRQMASK); - irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux); + irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux); /* register our IRQs */ diff --git a/arch/arm/mach-s3c24xx/bast.h b/arch/arm/mach-s3c24xx/bast.h new file mode 100644 index 0000000..5c7534b --- /dev/null +++ b/arch/arm/mach-s3c24xx/bast.h @@ -0,0 +1,197 @@ +/* + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * BAST - CPLD control constants + * BAST - IRQ Number definitions + * BAST - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_S3C24XX_BAST_H +#define __MACH_S3C24XX_BAST_H __FILE__ + +/* CTRL1 - Audio LR routing */ + +#define BAST_CPLD_CTRL1_LRCOFF (0x00) +#define BAST_CPLD_CTRL1_LRCADC (0x01) +#define BAST_CPLD_CTRL1_LRCDAC (0x02) +#define BAST_CPLD_CTRL1_LRCARM (0x03) +#define BAST_CPLD_CTRL1_LRMASK (0x03) + +/* CTRL2 - NAND WP control, IDE Reset assert/check */ + +#define BAST_CPLD_CTRL2_WNAND (0x04) +#define BAST_CPLD_CTLR2_IDERST (0x08) + +/* CTRL3 - rom write control, CPLD identity */ + +#define BAST_CPLD_CTRL3_IDMASK (0x0e) +#define BAST_CPLD_CTRL3_ROMWEN (0x01) + +/* CTRL4 - 8bit LCD interface control/status */ + +#define BAST_CPLD_CTRL4_LLAT (0x01) +#define BAST_CPLD_CTRL4_LCDRW (0x02) +#define BAST_CPLD_CTRL4_LCDCMD (0x04) +#define BAST_CPLD_CTRL4_LCDE2 (0x01) + +/* CTRL5 - DMA routing */ + +#define BAST_CPLD_DMA0_PRIIDE (0) +#define BAST_CPLD_DMA0_SECIDE (1) +#define BAST_CPLD_DMA0_ISA15 (2) +#define BAST_CPLD_DMA0_ISA36 (3) + +#define BAST_CPLD_DMA1_PRIIDE (0 << 2) +#define BAST_CPLD_DMA1_SECIDE (1 << 2) +#define BAST_CPLD_DMA1_ISA15 (2 << 2) +#define BAST_CPLD_DMA1_ISA36 (3 << 2) + +/* irq numbers to onboard peripherals */ + +#define BAST_IRQ_USBOC IRQ_EINT18 +#define BAST_IRQ_IDE0 IRQ_EINT16 +#define BAST_IRQ_IDE1 IRQ_EINT17 +#define BAST_IRQ_PCSERIAL1 IRQ_EINT15 +#define BAST_IRQ_PCSERIAL2 IRQ_EINT14 +#define BAST_IRQ_PCPARALLEL IRQ_EINT13 +#define BAST_IRQ_ASIX IRQ_EINT11 +#define BAST_IRQ_DM9000 IRQ_EINT10 +#define BAST_IRQ_ISA IRQ_EINT9 +#define BAST_IRQ_SMALERT IRQ_EINT8 + +/* map */ + +/* + * ok, we've used up to 0x13000000, now we need to find space for the + * peripherals that live in the nGCS[x] areas, which are quite numerous + * in their space. We also have the board's CPLD to find register space + * for. + */ + +#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) +#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000) + +#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) +#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000) + +#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) +#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000) + +#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) +#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000) + +/* next, we have the PC104 ISA interrupt registers */ + +#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) +#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000) + +#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) +#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000) + +#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) +#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000) + +#define BAST_PA_LCD_RCMD1 (0x8800000) +#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000) + +#define BAST_PA_LCD_WCMD1 (0x8000000) +#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000) + +#define BAST_PA_LCD_RDATA1 (0x9800000) +#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000) + +#define BAST_PA_LCD_WDATA1 (0x9000000) +#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000) + +#define BAST_PA_LCD_RCMD2 (0xA800000) +#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000) + +#define BAST_PA_LCD_WCMD2 (0xA000000) +#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000) + +#define BAST_PA_LCD_RDATA2 (0xB800000) +#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000) + +#define BAST_PA_LCD_WDATA2 (0xB000000) +#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000) + + +/* + * 0xE0000000 contains the IO space that is split by speed and + * whether the access is for 8 or 16bit IO... this ensures that + * the correct access is made + * + * 0x10000000 of space, partitioned as so: + * + * 0x00000000 to 0x04000000 8bit, slow + * 0x04000000 to 0x08000000 16bit, slow + * 0x08000000 to 0x0C000000 16bit, net + * 0x0C000000 to 0x10000000 16bit, fast + * + * each of these spaces has the following in: + * + * 0x00000000 to 0x01000000 16MB ISA IO space + * 0x01000000 to 0x02000000 16MB ISA memory space + * 0x02000000 to 0x02100000 1MB IDE primary channel + * 0x02100000 to 0x02200000 1MB IDE primary channel aux + * 0x02200000 to 0x02400000 1MB IDE secondary channel + * 0x02300000 to 0x02400000 1MB IDE secondary channel aux + * 0x02400000 to 0x02500000 1MB ASIX ethernet controller + * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller + * 0x02600000 to 0x02700000 1MB PC SuperIO controller + * + * the phyiscal layout of the zones are: + * nGCS2 - 8bit, slow + * nGCS3 - 16bit, slow + * nGCS4 - 16bit, net + * nGCS5 - 16bit, fast + */ + +#define BAST_VA_MULTISPACE (0xE0000000) + +#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000) +#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000) +#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000) +#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000) +#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000) +#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000) +#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000) +#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000) +#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000) + +#define BAST_VAM_CS2 (0x00000000) +#define BAST_VAM_CS3 (0x04000000) +#define BAST_VAM_CS4 (0x08000000) +#define BAST_VAM_CS5 (0x0C000000) + +/* physical offset addresses for the peripherals */ + +#define BAST_PA_ISAIO (0x00000000) +#define BAST_PA_ASIXNET (0x01000000) +#define BAST_PA_SUPERIO (0x01800000) +#define BAST_PA_IDEPRI (0x02000000) +#define BAST_PA_IDEPRIAUX (0x02800000) +#define BAST_PA_IDESEC (0x03000000) +#define BAST_PA_IDESECAUX (0x03800000) +#define BAST_PA_ISAMEM (0x04000000) +#define BAST_PA_DM9000 (0x05000000) + +/* some configurations for the peripherals */ + +#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2) + +#define BAST_ASIXNET_CS BAST_VAM_CS5 +#define BAST_DM9000_CS BAST_VAM_CS4 + +#define BAST_IDE_CS S3C2410_CS5 + +#endif /* __MACH_S3C24XX_BAST_H */ diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c index f95d326..1edd9b2 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/mach-s3c24xx/clock-dclk.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/clock-dclk.c - * +/* * Copyright (c) 2004-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c index 25dc4d4..641266f3 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-clock.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/clock.c - * +/* * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c index aeb4a24..f6b9f2e 100644 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ b/arch/arm/mach-s3c24xx/common-s3c2443.c @@ -132,7 +132,7 @@ static struct clk *clk_msysclk_sources[] = { [3] = &clk_mpllref, }; -struct clksrc_clk clk_msysclk = { +static struct clksrc_clk clk_msysclk = { .clk = { .name = "msysclk", .parent = &clk_xtal, diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 0c9e9a7..6bcf87f 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -197,7 +197,7 @@ static unsigned long s3c24xx_read_idcode_v4(void) static void s3c24xx_default_idle(void) { - unsigned long tmp; + unsigned long tmp = 0; int i; /* idle the system by using the idle mode which will wait for an diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index c2f596e..ed6276f 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -15,4 +15,6 @@ void s3c2410_restart(char mode, const char *cmd); void s3c244x_restart(char mode, const char *cmd); +extern struct syscore_ops s3c24xx_irq_syscore_ops; + #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c index c7adad0..9b7b428 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c +++ b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c - * +/* * Copyright (c) 2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c index 5404535..cfa0dd8 100644 --- a/arch/arm/mach-s3c2410/cpu-freq.c +++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/cpu-freq.c - * +/* * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -81,7 +80,7 @@ static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) cfg->divs.p_divisor = pdiv; cfg->divs.h_divisor = hdiv; - return 0 ; + return 0; } static struct s3c_cpufreq_info s3c2410_cpufreq_info = { @@ -131,7 +130,6 @@ static int __init s3c2410_cpufreq_init(void) { return subsys_interface_register(&s3c2410_cpufreq_interface); } - arch_initcall(s3c2410_cpufreq_init); static int s3c2410a_cpufreq_add(struct device *dev, @@ -159,5 +157,4 @@ static int __init s3c2410a_cpufreq_init(void) { return subsys_interface_register(&s3c2410a_cpufreq_interface); } - arch_initcall(s3c2410a_cpufreq_init); diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c index 125be7d..8bf0f3a 100644 --- a/arch/arm/mach-s3c2412/cpu-freq.c +++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2412/cpu-freq.c - * +/* * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -26,12 +25,13 @@ #include <asm/mach/map.h> #include <mach/regs-clock.h> -#include <mach/regs-s3c2412-mem.h> #include <plat/cpu.h> #include <plat/clock.h> #include <plat/cpu-freq-core.h> +#include "s3c2412.h" + /* our clock resources. */ static struct clk *xtal; static struct clk *fclk; @@ -111,7 +111,7 @@ static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) return 0; - invalid: +invalid: return -EINVAL; } @@ -255,5 +255,4 @@ static int s3c2412_cpufreq_init(void) { return subsys_interface_register(&s3c2412_cpufreq_interface); } - arch_initcall(s3c2412_cpufreq_init); diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c index 6177676..72b2cc8 100644 --- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c +++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c - * +/* * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -310,5 +309,4 @@ static int s3c2442_cpufreq_init(void) { return subsys_interface_register(&s3c2442_cpufreq_interface); } - subsys_initcall(s3c2442_cpufreq_init); diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index 43ea801..ddd8280 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c - * +/* * Copyright (c) 2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -17,11 +16,12 @@ #include <linux/io.h> #include <mach/map.h> -#include <mach/regs-mem.h> #include <mach/regs-clock.h> #include <plat/cpu-freq-core.h> +#include "regs-mem.h" + /** * s3c2410_cpufreq_setrefresh - set SDRAM refresh value * @cfg: The frequency configuration diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq.c index 4680799..5f181e7 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/mach-s3c24xx/cpufreq.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/cpu-freq.c - * +/* * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c index 4803338..25d085a 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2410.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c @@ -27,7 +27,6 @@ #include <mach/regs-gpio.h> #include <plat/regs-ac97.h> #include <plat/regs-dma.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> #include <plat/regs-iis.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c index 38472ac..d2408ba 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2412.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c @@ -27,7 +27,6 @@ #include <mach/regs-gpio.h> #include <plat/regs-ac97.h> #include <plat/regs-dma.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> #include <plat/regs-iis.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c index 5f0a0c8..0b86e74 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2440.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c @@ -27,7 +27,6 @@ #include <mach/regs-gpio.h> #include <plat/regs-ac97.h> #include <plat/regs-dma.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> #include <plat/regs-iis.h> diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c index 2d94228..0553625 100644 --- a/arch/arm/mach-s3c24xx/dma-s3c2443.c +++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c @@ -27,7 +27,6 @@ #include <mach/regs-gpio.h> #include <plat/regs-ac97.h> #include <plat/regs-dma.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> #include <plat/regs-iis.h> diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c index ba3e76c..aab6490 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/mach-s3c24xx/dma.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/dma.c - * +/* * Copyright 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/gta02.h index 2173934..9430a71 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gta02.h +++ b/arch/arm/mach-s3c24xx/gta02.h @@ -1,5 +1,13 @@ -#ifndef _GTA02_H -#define _GTA02_H +/* + * GTA02 header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_S3C24XX_GTA02_H +#define __MACH_S3C24XX_GTA02_H __FILE__ #include <mach/regs-gpio.h> @@ -12,4 +20,4 @@ #define GTA02_IRQ_PCF50633 IRQ_EINT9 -#endif /* _GTA02_H */ +#endif /* __MACH_S3C24XX_GTA02_H */ diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c index 3f40c61..5b98bfd 100644 --- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c +++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c @@ -19,10 +19,10 @@ #include <linux/gpio.h> #include <linux/rfkill.h> -#include <mach/regs-gpio.h> #include <mach/hardware.h> -#include <mach/h1940-latch.h> -#include <mach/h1940.h> +#include <mach/regs-gpio.h> + +#include "h1940.h" #define DRV_NAME "h1940-bt" diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h b/arch/arm/mach-s3c24xx/h1940.h index fc897d3..2950cc4 100644 --- a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h +++ b/arch/arm/mach-s3c24xx/h1940.h @@ -1,20 +1,30 @@ -/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h +/* + * Copyright 2006 Ben Dooks <ben-linux@fluff.org> * * Copyright (c) 2005 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * iPAQ H1940 series - latch definitions + * iPAQ H1940 series definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_H1940_LATCH_H -#define __ASM_ARCH_H1940_LATCH_H +#ifndef __MACH_S3C24XX_H1940_H +#define __MACH_S3C24XX_H1940_H __FILE__ -#include <asm/gpio.h> +#define H1940_SUSPEND_CHECKSUM (0x30003ff8) +#define H1940_SUSPEND_RESUMEAT (0x30081000) +#define H1940_SUSPEND_CHECK (0x30080000) + +extern void h1940_pm_return(void); +extern int h1940_led_blink_set(unsigned gpio, int state, + unsigned long *delay_on, + unsigned long *delay_off); + +#include <linux/gpio.h> #define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x)) @@ -40,4 +50,4 @@ #define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14) #define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15) -#endif /* __ASM_ARCH_H1940_LATCH_H */ +#endif /* __MACH_S3C24XX_H1940_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h deleted file mode 100644 index 1b614d5..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h +++ /dev/null @@ -1,25 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks <ben@simtec.co.uk> - * - * ANUBIS - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ANUBISCPLD_H -#define __ASM_ARCH_ANUBISCPLD_H - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define ANUBIS_CTRL1_NANDSEL (0x3) - -/* IDREG - revision */ - -#define ANUBIS_IDREG_REVMASK (0x7) - -#endif /* __ASM_ARCH_ANUBISCPLD_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h deleted file mode 100644 index a2a3281..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks <ben@simtec.co.uk> - * - * ANUBIS - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ANUBISIRQ_H -#define __ASM_ARCH_ANUBISIRQ_H - -#define IRQ_IDE0 IRQ_EINT2 -#define IRQ_IDE1 IRQ_EINT3 -#define IRQ_ASIX IRQ_EINT1 - -#endif /* __ASM_ARCH_ANUBISIRQ_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h deleted file mode 100644 index c9deb3a..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/anubis-map.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks <ben@simtec.co.uk> - * - * ANUBIS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -#ifndef __ASM_ARCH_ANUBISMAP_H -#define __ASM_ARCH_ANUBISMAP_H - -/* start peripherals off after the S3C2410 */ - -#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000)) - -#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */ -#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD) - -#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */ -#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23)) - -#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000) -#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000) -#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000) -#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000) - -#endif /* __ASM_ARCH_ANUBISMAP_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h deleted file mode 100644 index bee2a7a..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h +++ /dev/null @@ -1,53 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * BAST - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTCPLD_H -#define __ASM_ARCH_BASTCPLD_H - -/* CTRL1 - Audio LR routing */ - -#define BAST_CPLD_CTRL1_LRCOFF (0x00) -#define BAST_CPLD_CTRL1_LRCADC (0x01) -#define BAST_CPLD_CTRL1_LRCDAC (0x02) -#define BAST_CPLD_CTRL1_LRCARM (0x03) -#define BAST_CPLD_CTRL1_LRMASK (0x03) - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define BAST_CPLD_CTRL2_WNAND (0x04) -#define BAST_CPLD_CTLR2_IDERST (0x08) - -/* CTRL3 - rom write control, CPLD identity */ - -#define BAST_CPLD_CTRL3_IDMASK (0x0e) -#define BAST_CPLD_CTRL3_ROMWEN (0x01) - -/* CTRL4 - 8bit LCD interface control/status */ - -#define BAST_CPLD_CTRL4_LLAT (0x01) -#define BAST_CPLD_CTRL4_LCDRW (0x02) -#define BAST_CPLD_CTRL4_LCDCMD (0x04) -#define BAST_CPLD_CTRL4_LCDE2 (0x01) - -/* CTRL5 - DMA routing */ - -#define BAST_CPLD_DMA0_PRIIDE (0<<0) -#define BAST_CPLD_DMA0_SECIDE (1<<0) -#define BAST_CPLD_DMA0_ISA15 (2<<0) -#define BAST_CPLD_DMA0_ISA36 (3<<0) - -#define BAST_CPLD_DMA1_PRIIDE (0<<2) -#define BAST_CPLD_DMA1_SECIDE (1<<2) -#define BAST_CPLD_DMA1_ISA15 (2<<2) -#define BAST_CPLD_DMA1_ISA36 (3<<2) - -#endif /* __ASM_ARCH_BASTCPLD_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h deleted file mode 100644 index cac428c..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h +++ /dev/null @@ -1,29 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-irq.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Machine BAST - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTIRQ_H -#define __ASM_ARCH_BASTIRQ_H - -/* irq numbers to onboard peripherals */ - -#define IRQ_USBOC IRQ_EINT18 -#define IRQ_IDE0 IRQ_EINT16 -#define IRQ_IDE1 IRQ_EINT17 -#define IRQ_PCSERIAL1 IRQ_EINT15 -#define IRQ_PCSERIAL2 IRQ_EINT14 -#define IRQ_PCPARALLEL IRQ_EINT13 -#define IRQ_ASIX IRQ_EINT11 -#define IRQ_DM9000 IRQ_EINT10 -#define IRQ_ISA IRQ_EINT9 -#define IRQ_SMALERT IRQ_EINT8 - -#endif /* __ASM_ARCH_BASTIRQ_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h deleted file mode 100644 index eecea2a..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/bast-map.h +++ /dev/null @@ -1,146 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-map.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Machine BAST - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#ifndef __ASM_ARCH_BASTMAP_H -#define __ASM_ARCH_BASTMAP_H - -#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */ -#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */ -#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */ -#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */ -#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000) - -#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000) - -#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000) - -#define BAST_PA_LCD_RCMD1 (0x8800000) -#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000) - -#define BAST_PA_LCD_WCMD1 (0x8000000) -#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000) - -#define BAST_PA_LCD_RDATA1 (0x9800000) -#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000) - -#define BAST_PA_LCD_WDATA1 (0x9000000) -#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000) - -#define BAST_PA_LCD_RCMD2 (0xA800000) -#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000) - -#define BAST_PA_LCD_WCMD2 (0xA000000) -#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000) - -#define BAST_PA_LCD_RDATA2 (0xB800000) -#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000) - -#define BAST_PA_LCD_WDATA2 (0xB000000) -#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000) - - -/* 0xE0000000 contains the IO space that is split by speed and - * whether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x00000000 to 0x01000000 16MB ISA IO space - * 0x01000000 to 0x02000000 16MB ISA memory space - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02400000 to 0x02500000 1MB ASIX ethernet controller - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller - * 0x02600000 to 0x02700000 1MB PC SuperIO controller - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000) -#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000) -#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000) -#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000) -#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000) -#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000) -#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000) -#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000) -#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000) - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VAM_CS2 (0x00000000) -#define BAST_VAM_CS3 (0x04000000) -#define BAST_VAM_CS4 (0x08000000) -#define BAST_VAM_CS5 (0x0C000000) - -/* physical offset addresses for the peripherals */ - -#define BAST_PA_ISAIO (0x00000000) -#define BAST_PA_ASIXNET (0x01000000) -#define BAST_PA_SUPERIO (0x01800000) -#define BAST_PA_IDEPRI (0x02000000) -#define BAST_PA_IDEPRIAUX (0x02800000) -#define BAST_PA_IDESEC (0x03000000) -#define BAST_PA_IDESECAUX (0x03800000) -#define BAST_PA_ISAMEM (0x04000000) -#define BAST_PA_DM9000 (0x05000000) - -/* some configurations for the peripherals */ - -#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2) -/* */ - -#define BAST_ASIXNET_CS BAST_VAM_CS5 -#define BAST_IDE_CS BAST_VAM_CS5 -#define BAST_DM9000_CS BAST_VAM_CS4 - -#endif /* __ASM_ARCH_BASTMAP_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 4135de8..13ed33c 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -40,17 +40,17 @@ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] + ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? 1004: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] moveq \rd, \rd, lsr #SHIFT_2440TXF tst \rd, #S3C2410_UFSTAT_TXFULL .endm .macro fifo_full_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] tst \rd, #S3C2410_UFSTAT_TXFULL .endm @@ -68,18 +68,18 @@ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] + ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? 10000: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] andne \rd, \rd, #S3C2410_UFSTAT_TXMASK andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK .endm .macro fifo_level_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] and \rd, \rd, #S3C2410_UFSTAT_TXMASK .endm diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S index 7615a14..6a21bee 100644 --- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S @@ -31,10 +31,10 @@ @@ try the interrupt offset register, since it is there - ldr \irqstat, [ \base, #INTPND ] + ldr \irqstat, [\base, #INTPND ] teq \irqstat, #0 beq 1002f - ldr \irqnr, [ \base, #INTOFFSET ] + ldr \irqnr, [\base, #INTOFFSET ] mov \tmp, #1 tst \irqstat, \tmp, lsl \irqnr bne 1001f diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h deleted file mode 100644 index c53ad34..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h +++ /dev/null @@ -1 +0,0 @@ -#include <plat/gpio-fns.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h deleted file mode 100644 index 3890a05..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h +++ /dev/null @@ -1,97 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - GPIO bank numbering - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __MACH_GPIONRS_H -#define __MACH_GPIONRS_H - -#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) - -#define S3C2410_GPIO_BANKG (32*6) -#define S3C2410_GPIO_BANKH (32*7) - -/* GPIO sizes for various SoCs: - * - * 2442 - * 2410 2412 2440 2443 2416 - * ---- ---- ---- ---- ---- - * A 23 22 25 16 25 - * B 11 11 11 11 9 - * C 16 15 16 16 16 - * D 16 16 16 16 16 - * E 16 16 16 16 16 - * F 8 8 8 8 8 - * G 16 16 16 16 8 - * H 11 11 9 15 15 - * J -- -- 13 16 -- - * K -- -- -- -- 16 - * L -- -- -- 15 7 - * M -- -- -- 2 2 - */ - -/* GPIO bank sizes */ -#define S3C2410_GPIO_A_NR (32) -#define S3C2410_GPIO_B_NR (32) -#define S3C2410_GPIO_C_NR (32) -#define S3C2410_GPIO_D_NR (32) -#define S3C2410_GPIO_E_NR (32) -#define S3C2410_GPIO_F_NR (32) -#define S3C2410_GPIO_G_NR (32) -#define S3C2410_GPIO_H_NR (32) -#define S3C2410_GPIO_J_NR (32) /* technically 16. */ -#define S3C2410_GPIO_K_NR (32) /* technically 16. */ -#define S3C2410_GPIO_L_NR (32) /* technically 15. */ -#define S3C2410_GPIO_M_NR (32) /* technically 2. */ - -#if CONFIG_S3C_GPIO_SPACE != 0 -#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment -#endif - -#define S3C2410_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0) - -#ifndef __ASSEMBLY__ - -enum s3c_gpio_number { - S3C2410_GPIO_A_START = 0, - S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A), - S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B), - S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C), - S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D), - S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E), - S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F), - S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G), - S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H), - S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J), - S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K), - S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L), -}; - -#endif /* __ASSEMBLY__ */ - -/* S3C2410 GPIO number definitions. */ - -#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr)) -#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr)) -#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr)) -#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr)) -#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr)) -#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr)) -#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr)) -#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr)) -#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr)) -#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr)) -#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) -#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) - -#endif /* __MACH_GPIONRS_H */ - diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h deleted file mode 100644 index c410a07..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/mach-s3c24100/include/mach/gpio-core.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C2410 - GPIO core support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_CORE_H -#define __ASM_ARCH_GPIO_CORE_H __FILE__ - -#include <mach/regs-gpio.h> - -extern struct samsung_gpio_chip s3c24xx_gpios[]; - -static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin) -{ - struct samsung_gpio_chip *chip; - - if (pin > S3C_GPIO_END) - return NULL; - - chip = &s3c24xx_gpios[pin/32]; - return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL; -} - -#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio.h b/arch/arm/mach-s3c24xx/include/mach/gpio.h index 6fac70f..1459156 100644 --- a/arch/arm/mach-s3c24xx/include/mach/gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/gpio.h @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/gpio.h - * +/* * Copyright (c) 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -15,6 +14,9 @@ * devices that need GPIO. */ +#ifndef __MACH_GPIO_H +#define __MACH_GPIO_H __FILE__ + #ifdef CONFIG_CPU_S3C244X #define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA) #elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) @@ -23,8 +25,83 @@ #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) #endif -#include <mach/gpio-nrs.h> -#include <mach/gpio-fns.h> +/* + * GPIO sizes for various SoCs: + * + * 2410 2412 2440 2443 2416 + * 2442 + * ---- ---- ---- ---- ---- + * A 23 22 25 16 25 + * B 11 11 11 11 9 + * C 16 15 16 16 16 + * D 16 16 16 16 16 + * E 16 16 16 16 16 + * F 8 8 8 8 8 + * G 16 16 16 16 8 + * H 11 11 9 15 15 + * J -- -- 13 16 -- + * K -- -- -- -- 16 + * L -- -- -- 15 7 + * M -- -- -- 2 2 + */ + +/* GPIO bank sizes */ + +#define S3C2410_GPIO_A_NR (32) +#define S3C2410_GPIO_B_NR (32) +#define S3C2410_GPIO_C_NR (32) +#define S3C2410_GPIO_D_NR (32) +#define S3C2410_GPIO_E_NR (32) +#define S3C2410_GPIO_F_NR (32) +#define S3C2410_GPIO_G_NR (32) +#define S3C2410_GPIO_H_NR (32) +#define S3C2410_GPIO_J_NR (32) /* technically 16. */ +#define S3C2410_GPIO_K_NR (32) /* technically 16. */ +#define S3C2410_GPIO_L_NR (32) /* technically 15. */ +#define S3C2410_GPIO_M_NR (32) /* technically 2. */ + +#if CONFIG_S3C_GPIO_SPACE != 0 +#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment +#endif + +#define S3C2410_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0) + +#ifndef __ASSEMBLY__ + +enum s3c_gpio_number { + S3C2410_GPIO_A_START = 0, + S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A), + S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B), + S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C), + S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D), + S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E), + S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F), + S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G), + S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H), + S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J), + S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K), + S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L), +}; + +#endif /* __ASSEMBLY__ */ + +/* S3C2410 GPIO number definitions. */ + +#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr)) +#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr)) +#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr)) +#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr)) +#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr)) +#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr)) +#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr)) +#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr)) +#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr)) +#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr)) +#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) +#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) + +#include <plat/gpio-cfg.h> #ifdef CONFIG_CPU_S3C244X #define S3C_GPIO_END (S3C2410_GPJ(0) + 32) @@ -33,3 +110,5 @@ #else #define S3C_GPIO_END (S3C2410_GPH(0) + 32) #endif + +#endif /* __MACH_GPIO_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940.h b/arch/arm/mach-s3c24xx/include/mach/h1940.h deleted file mode 100644 index 2aa683c..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/h1940.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/h1940.h - * - * Copyright 2006 Ben Dooks <ben-linux@fluff.org> - * - * H1940 definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_H1940_H -#define __ASM_ARCH_H1940_H - -#define H1940_SUSPEND_CHECKSUM (0x30003ff8) -#define H1940_SUSPEND_RESUMEAT (0x30081000) -#define H1940_SUSPEND_CHECK (0x30080000) - -extern void h1940_pm_return(void); -extern int h1940_led_blink_set(unsigned gpio, int state, - unsigned long *delay_on, unsigned long *delay_off); - - -#endif /* __ASM_ARCH_H1940_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h index aef5631..a6cc14a 100644 --- a/arch/arm/mach-s3c24xx/include/mach/hardware.h +++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h @@ -23,12 +23,6 @@ extern int s3c2440_set_dsc(unsigned int pin, unsigned int value); #endif /* CONFIG_CPU_S3C2440 */ -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state); - -#endif /* CONFIG_CPU_S3C2412 */ - #endif /* __ASSEMBLY__ */ #include <asm/sizes.h> diff --git a/arch/arm/mach-s3c24xx/include/mach/idle.h b/arch/arm/mach-s3c24xx/include/mach/idle.h deleted file mode 100644 index e9ddd70..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/idle.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/idle.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 CPU Idle controls -*/ - -#ifndef __ASM_ARCH_IDLE_H -#define __ASM_ARCH_IDLE_H __FILE__ - -/* This allows the over-ride of the default idle code, in case there - * is any other things to be done over idle (like DVS) -*/ - -extern void (*s3c24xx_idle)(void); - -extern void s3c24xx_default_idle(void); - -#endif /* __ASM_ARCH_IDLE_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h deleted file mode 100644 index e9e36b0..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h - * - * Copyright 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks <ben@simtec.co.uk> - * - * OSIRIS - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_OSIRISCPLD_H -#define __ASM_ARCH_OSIRISCPLD_H - -/* CTRL0 - NAND WP control */ - -#define OSIRIS_CTRL0_NANDSEL (0x3) -#define OSIRIS_CTRL0_BOOT_INT (1<<3) -#define OSIRIS_CTRL0_PCMCIA (1<<4) -#define OSIRIS_CTRL0_FIX8 (1<<5) -#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6) -#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7) - -#define OSIRIS_CTRL1_FIX8 (1<<0) - -#define OSIRIS_ID_REVMASK (0x7) - -#endif /* __ASM_ARCH_OSIRISCPLD_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index a11a638..c2ef016 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -14,8 +14,6 @@ #ifndef __ASM_ARCH_REGS_GPIO_H #define __ASM_ARCH_REGS_GPIO_H -#include <mach/gpio-nrs.h> - #define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) /* general configuration options */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h deleted file mode 100644 index e0c67b0..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h +++ /dev/null @@ -1,202 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-mem.h - * - * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Memory Control register definitions -*/ - -#ifndef __ASM_ARM_MEMREGS_H -#define __ASM_ARM_MEMREGS_H - -#ifndef S3C2410_MEMREG -#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif - -/* bus width, and wait state control */ -#define S3C2410_BWSCON S3C2410_MEMREG(0x0000) - -/* bank zero config - note, pinstrapped from OM pins! */ -#define S3C2410_BWSCON_DW0_16 (1<<1) -#define S3C2410_BWSCON_DW0_32 (2<<1) - -/* bank one configs */ -#define S3C2410_BWSCON_DW1_8 (0<<4) -#define S3C2410_BWSCON_DW1_16 (1<<4) -#define S3C2410_BWSCON_DW1_32 (2<<4) -#define S3C2410_BWSCON_WS1 (1<<6) -#define S3C2410_BWSCON_ST1 (1<<7) - -/* bank 2 configurations */ -#define S3C2410_BWSCON_DW2_8 (0<<8) -#define S3C2410_BWSCON_DW2_16 (1<<8) -#define S3C2410_BWSCON_DW2_32 (2<<8) -#define S3C2410_BWSCON_WS2 (1<<10) -#define S3C2410_BWSCON_ST2 (1<<11) - -/* bank 3 configurations */ -#define S3C2410_BWSCON_DW3_8 (0<<12) -#define S3C2410_BWSCON_DW3_16 (1<<12) -#define S3C2410_BWSCON_DW3_32 (2<<12) -#define S3C2410_BWSCON_WS3 (1<<14) -#define S3C2410_BWSCON_ST3 (1<<15) - -/* bank 4 configurations */ -#define S3C2410_BWSCON_DW4_8 (0<<16) -#define S3C2410_BWSCON_DW4_16 (1<<16) -#define S3C2410_BWSCON_DW4_32 (2<<16) -#define S3C2410_BWSCON_WS4 (1<<18) -#define S3C2410_BWSCON_ST4 (1<<19) - -/* bank 5 configurations */ -#define S3C2410_BWSCON_DW5_8 (0<<20) -#define S3C2410_BWSCON_DW5_16 (1<<20) -#define S3C2410_BWSCON_DW5_32 (2<<20) -#define S3C2410_BWSCON_WS5 (1<<22) -#define S3C2410_BWSCON_ST5 (1<<23) - -/* bank 6 configurations */ -#define S3C2410_BWSCON_DW6_8 (0<<24) -#define S3C2410_BWSCON_DW6_16 (1<<24) -#define S3C2410_BWSCON_DW6_32 (2<<24) -#define S3C2410_BWSCON_WS6 (1<<26) -#define S3C2410_BWSCON_ST6 (1<<27) - -/* bank 7 configurations */ -#define S3C2410_BWSCON_DW7_8 (0<<28) -#define S3C2410_BWSCON_DW7_16 (1<<28) -#define S3C2410_BWSCON_DW7_32 (2<<28) -#define S3C2410_BWSCON_WS7 (1<<30) -#define S3C2410_BWSCON_ST7 (1<<31) - -/* accesor functions for getting BANK(n) configuration. (n != 0) */ - -#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf) - -#define S3C2410_BWSCON_DW8 (0) -#define S3C2410_BWSCON_DW16 (1) -#define S3C2410_BWSCON_DW32 (2) -#define S3C2410_BWSCON_WS (1 << 2) -#define S3C2410_BWSCON_ST (1 << 3) - -/* memory set (rom, ram) */ -#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004) -#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008) -#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C) -#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010) -#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014) -#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018) -#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C) -#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020) - -/* bank configuration registers */ - -#define S3C2410_BANKCON_PMCnorm (0x00) -#define S3C2410_BANKCON_PMC4 (0x01) -#define S3C2410_BANKCON_PMC8 (0x02) -#define S3C2410_BANKCON_PMC16 (0x03) - -/* bank configurations for banks 0..7, note banks - * 6 and 7 have different configurations depending on - * the memory type bits */ - -#define S3C2410_BANKCON_Tacp2 (0x0 << 2) -#define S3C2410_BANKCON_Tacp3 (0x1 << 2) -#define S3C2410_BANKCON_Tacp4 (0x2 << 2) -#define S3C2410_BANKCON_Tacp6 (0x3 << 2) -#define S3C2410_BANKCON_Tacp_SHIFT (2) - -#define S3C2410_BANKCON_Tcah0 (0x0 << 4) -#define S3C2410_BANKCON_Tcah1 (0x1 << 4) -#define S3C2410_BANKCON_Tcah2 (0x2 << 4) -#define S3C2410_BANKCON_Tcah4 (0x3 << 4) -#define S3C2410_BANKCON_Tcah_SHIFT (4) - -#define S3C2410_BANKCON_Tcoh0 (0x0 << 6) -#define S3C2410_BANKCON_Tcoh1 (0x1 << 6) -#define S3C2410_BANKCON_Tcoh2 (0x2 << 6) -#define S3C2410_BANKCON_Tcoh4 (0x3 << 6) -#define S3C2410_BANKCON_Tcoh_SHIFT (6) - -#define S3C2410_BANKCON_Tacc1 (0x0 << 8) -#define S3C2410_BANKCON_Tacc2 (0x1 << 8) -#define S3C2410_BANKCON_Tacc3 (0x2 << 8) -#define S3C2410_BANKCON_Tacc4 (0x3 << 8) -#define S3C2410_BANKCON_Tacc6 (0x4 << 8) -#define S3C2410_BANKCON_Tacc8 (0x5 << 8) -#define S3C2410_BANKCON_Tacc10 (0x6 << 8) -#define S3C2410_BANKCON_Tacc14 (0x7 << 8) -#define S3C2410_BANKCON_Tacc_SHIFT (8) - -#define S3C2410_BANKCON_Tcos0 (0x0 << 11) -#define S3C2410_BANKCON_Tcos1 (0x1 << 11) -#define S3C2410_BANKCON_Tcos2 (0x2 << 11) -#define S3C2410_BANKCON_Tcos4 (0x3 << 11) -#define S3C2410_BANKCON_Tcos_SHIFT (11) - -#define S3C2410_BANKCON_Tacs0 (0x0 << 13) -#define S3C2410_BANKCON_Tacs1 (0x1 << 13) -#define S3C2410_BANKCON_Tacs2 (0x2 << 13) -#define S3C2410_BANKCON_Tacs4 (0x3 << 13) -#define S3C2410_BANKCON_Tacs_SHIFT (13) - -#define S3C2410_BANKCON_SRAM (0x0 << 15) -#define S3C2410_BANKCON_SDRAM (0x3 << 15) - -/* next bits only for SDRAM in 6,7 */ -#define S3C2410_BANKCON_Trcd2 (0x00 << 2) -#define S3C2410_BANKCON_Trcd3 (0x01 << 2) -#define S3C2410_BANKCON_Trcd4 (0x02 << 2) - -/* control column address select */ -#define S3C2410_BANKCON_SCANb8 (0x00 << 0) -#define S3C2410_BANKCON_SCANb9 (0x01 << 0) -#define S3C2410_BANKCON_SCANb10 (0x02 << 0) - -#define S3C2410_REFRESH S3C2410_MEMREG(0x0024) -#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028) -#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C) -#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030) - -/* refresh control */ - -#define S3C2410_REFRESH_REFEN (1<<23) -#define S3C2410_REFRESH_SELF (1<<22) -#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1) - -#define S3C2410_REFRESH_TRP_MASK (3<<20) -#define S3C2410_REFRESH_TRP_2clk (0<<20) -#define S3C2410_REFRESH_TRP_3clk (1<<20) -#define S3C2410_REFRESH_TRP_4clk (2<<20) - -#define S3C2410_REFRESH_TSRC_MASK (3<<18) -#define S3C2410_REFRESH_TSRC_4clk (0<<18) -#define S3C2410_REFRESH_TSRC_5clk (1<<18) -#define S3C2410_REFRESH_TSRC_6clk (2<<18) -#define S3C2410_REFRESH_TSRC_7clk (3<<18) - - -/* mode select register(s) */ - -#define S3C2410_MRSRB_CL1 (0x00 << 4) -#define S3C2410_MRSRB_CL2 (0x02 << 4) -#define S3C2410_MRSRB_CL3 (0x03 << 4) - -/* bank size register */ -#define S3C2410_BANKSIZE_128M (0x2 << 0) -#define S3C2410_BANKSIZE_64M (0x1 << 0) -#define S3C2410_BANKSIZE_32M (0x0 << 0) -#define S3C2410_BANKSIZE_16M (0x7 << 0) -#define S3C2410_BANKSIZE_8M (0x6 << 0) -#define S3C2410_BANKSIZE_4M (0x5 << 0) -#define S3C2410_BANKSIZE_2M (0x4 << 0) -#define S3C2410_BANKSIZE_MASK (0x7 << 0) -#define S3C2410_BANKSIZE_SCLK_EN (1<<4) -#define S3C2410_BANKSIZE_SCKE_EN (1<<5) -#define S3C2410_BANKSIZE_BURST (1<<7) - -#endif /* __ASM_ARM_MEMREGS_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-power.h b/arch/arm/mach-s3c24xx/include/mach/regs-power.h deleted file mode 100644 index 4932b87..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-power.h +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-power.h - * - * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX power control register definitions -*/ - -#ifndef __ASM_ARM_REGS_PWR -#define __ASM_ARM_REGS_PWR __FILE__ - -#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20) -#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24) - -#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70) -#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74) -#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78) -#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C) - -#define S3C2412_PWRCFG_BATF_IRQ (1<<0) -#define S3C2412_PWRCFG_BATF_IGNORE (2<<0) -#define S3C2412_PWRCFG_BATF_SLEEP (3<<0) -#define S3C2412_PWRCFG_BATF_MASK (3<<0) - -#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6) -#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6) -#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6) -#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6) -#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6) - -#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8) -#define S3C2412_PWRCFG_NAND_NORST (1<<9) - -#endif /* __ASM_ARM_REGS_PWR */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h deleted file mode 100644 index fb63525..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h +++ /dev/null @@ -1,48 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 memory register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2412_MEM -#define __ASM_ARM_REGS_S3C2412_MEM - -#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) - -#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x)) -#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o))) - -#define S3C2412_BANKCFG S3C2412_MEMREG(0x00) -#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04) -#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08) -#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C) - -#define S3C2412_REFRESH S3C2412_MEMREG(0x10) -#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14) - -/* EBI control registers */ - -#define S3C2412_EBI_PR S3C2412_EBIREG(0x00) -#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x04) - -/* SSMC control registers */ - -#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x00) -#define S3C2412_SMIDCYR(x) S3C2412_SSMC(x, 0x00) -#define S3C2412_SMBWSTRD(x) S3C2412_SSMC(x, 0x04) -#define S3C2412_SMBWSTWRR(x) S3C2412_SSMC(x, 0x08) -#define S3C2412_SMBWSTOENR(x) S3C2412_SSMC(x, 0x0C) -#define S3C2412_SMBWSTWENR(x) S3C2412_SSMC(x, 0x10) -#define S3C2412_SMBCR(x) S3C2412_SSMC(x, 0x14) -#define S3C2412_SMBSR(x) S3C2412_SSMC(x, 0x18) -#define S3C2412_SMBWSTBRDR(x) S3C2412_SSMC(x, 0x1C) - -#endif /* __ASM_ARM_REGS_S3C2412_MEM */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h deleted file mode 100644 index aa69dc7..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h +++ /dev/null @@ -1,23 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 specific register definitions -*/ - -#ifndef __ASM_ARCH_REGS_S3C2412_H -#define __ASM_ARCH_REGS_S3C2412_H "s3c2412" - -#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) -#define S3C2412_SWRST_RESET (0x533C2412) - -/* see regs-power.h for the other registers in the power block. */ - -#endif /* __ASM_ARCH_REGS_S3C2412_H */ - diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h deleted file mode 100644 index 2f31b74..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, - * as part of OpenInkpot project - * Copyright (c) 2009 Promwad Innovation Company - * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2416 memory register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2416_MEM -#define __ASM_ARM_REGS_S3C2416_MEM - -#ifndef S3C2416_MEMREG -#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif - -#define S3C2416_BANKCFG S3C2416_MEMREG(0x00) -#define S3C2416_BANKCON1 S3C2416_MEMREG(0x04) -#define S3C2416_BANKCON2 S3C2416_MEMREG(0x08) -#define S3C2416_BANKCON3 S3C2416_MEMREG(0x0C) - -#define S3C2416_REFRESH S3C2416_MEMREG(0x10) -#define S3C2416_TIMEOUT S3C2416_MEMREG(0x14) - -#endif /* __ASM_ARM_REGS_S3C2416_MEM */ diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h deleted file mode 100644 index e443167..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, - * as part of OpenInkpot project - * Copyright (c) 2009 Promwad Innovation Company - * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2416 specific register definitions -*/ - -#ifndef __ASM_ARCH_REGS_S3C2416_H -#define __ASM_ARCH_REGS_S3C2416_H "s3c2416" - -#define S3C2416_SWRST (S3C24XX_VA_CLKPWR + 0x44) -#define S3C2416_SWRST_RESET (0x533C2416) - -/* see regs-power.h for the other registers in the power block. */ - -#endif /* __ASM_ARCH_REGS_S3C2416_H */ - diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h deleted file mode 100644 index e411991..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * VR1000 - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VR1000CPLD_H -#define __ASM_ARCH_VR1000CPLD_H - -#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ - -#endif /* __ASM_ARCH_VR1000CPLD_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h deleted file mode 100644 index 47add13..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h +++ /dev/null @@ -1,26 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Machine VR1000 - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VR1000IRQ_H -#define __ASM_ARCH_VR1000IRQ_H - -/* irq numbers to onboard peripherals */ - -#define IRQ_USBOC IRQ_EINT19 -#define IRQ_IDE0 IRQ_EINT16 -#define IRQ_IDE1 IRQ_EINT17 -#define IRQ_VR1000_SERIAL IRQ_EINT12 -#define IRQ_VR1000_DM9000A IRQ_EINT10 -#define IRQ_VR1000_DM9000N IRQ_EINT9 -#define IRQ_SMALERT IRQ_EINT8 - -#endif /* __ASM_ARCH_VR1000IRQ_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h deleted file mode 100644 index 28376e5..0000000 --- a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h +++ /dev/null @@ -1,110 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Machine VR1000 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#ifndef __ASM_ARCH_VR1000MAP_H -#define __ASM_ARCH_VR1000MAP_H - -#include <mach/bast-map.h> - -#define VR1000_IOADDR(x) BAST_IOADDR(x) - -/* we put the CPLD registers next, to get them out of the way */ - -#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ -#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ -#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ -#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ -#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) - -#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) - -#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) - -/* 0xE0000000 contains the IO space that is split by speed and - * whether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers - * 0x02600000 to 0x02700000 1MB - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define VR1000_VA_MULTISPACE (0xE0000000) - -#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) -#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) -#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) -#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) -#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) -#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) -#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) -#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) -#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) - -/* physical offset addresses for the peripherals */ - -#define VR1000_PA_IDEPRI (0x02000000) -#define VR1000_PA_IDEPRIAUX (0x02800000) -#define VR1000_PA_IDESEC (0x03000000) -#define VR1000_PA_IDESECAUX (0x03800000) -#define VR1000_PA_DM9000 (0x05000000) - -#define VR1000_PA_SERIAL (0x11800000) -#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) - -/* VR1000 ram is in CS1, with A26..A24 = 2_101 */ -#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) - -/* some configurations for the peripherals */ - -#define VR1000_DM9000_CS VR1000_VAM_CS4 - -#endif /* __ASM_ARCH_VR1000MAP_H */ diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c index b1908e5..4cd13ab 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c - * +/* * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -20,11 +19,12 @@ #include <linux/slab.h> #include <mach/map.h> -#include <mach/regs-mem.h> #include <mach/regs-clock.h> #include <plat/cpu-freq-core.h> +#include "regs-mem.h" + #define print_ns(x) ((x) / 10), ((x) % 10) /** diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c index 48eee39..663436d 100644 --- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c - * +/* * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -28,12 +27,12 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-s3c2412-mem.h> - #include <plat/cpu.h> #include <plat/cpu-freq-core.h> #include <plat/clock.h> +#include "s3c2412.h" + #define print_ns(x) ((x) / 10), ((x) % 10) /** diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c index 0efb2e2..e119959 100644 --- a/arch/arm/mach-s3c24xx/irq-pm.c +++ b/arch/arm/mach-s3c24xx/irq-pm.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/syscore_ops.h> #include <plat/cpu.h> #include <plat/pm.h> @@ -29,18 +30,18 @@ * set bit to 1 in allow bitfield to enable the wakeup settings on it */ -unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; +unsigned long s3c_irqwake_intallow = 1L << 30 | 0xfL; unsigned long s3c_irqwake_eintallow = 0x0000fff0L; int s3c_irq_wake(struct irq_data *data, unsigned int state) { - unsigned long irqbit = 1 << (data->irq - IRQ_EINT0); + unsigned long irqbit = 1 << data->hwirq; if (!(s3c_irqwake_intallow & irqbit)) return -ENOENT; - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", data->irq); + pr_info("wake %s for hwirq %lu\n", + state ? "enabled" : "disabled", data->hwirq); if (!state) s3c_irqwake_intmask |= irqbit; @@ -64,7 +65,7 @@ static unsigned long save_extint[3]; static unsigned long save_eintflt[4]; static unsigned long save_eintmask; -int s3c24xx_irq_suspend(void) +static int s3c24xx_irq_suspend(void) { unsigned int i; @@ -80,7 +81,7 @@ int s3c24xx_irq_suspend(void) return 0; } -void s3c24xx_irq_resume(void) +static void s3c24xx_irq_resume(void) { unsigned int i; @@ -93,3 +94,31 @@ void s3c24xx_irq_resume(void) s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); __raw_writel(save_eintmask, S3C24XX_EINTMASK); } + +struct syscore_ops s3c24xx_irq_syscore_ops = { + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, +}; + +#ifdef CONFIG_CPU_S3C2416 +static struct sleep_save s3c2416_irq_save[] = { + SAVE_ITEM(S3C2416_INTMSK2), +}; + +static int s3c2416_irq_suspend(void) +{ + s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save)); + + return 0; +} + +static void s3c2416_irq_resume(void) +{ + s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save)); +} + +struct syscore_ops s3c2416_irq_syscore_ops = { + .suspend = s3c2416_irq_suspend, + .resume = s3c2416_irq_resume, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c index e65619d..67d7631 100644 --- a/arch/arm/mach-s3c24xx/irq-s3c2412.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2412.c @@ -33,12 +33,13 @@ #include <mach/regs-irq.h> #include <mach/regs-gpio.h> -#include <mach/regs-power.h> #include <plat/cpu.h> #include <plat/irq.h> #include <plat/pm.h> +#include "s3c2412-power.h" + #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) #define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0)))) diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c deleted file mode 100644 index ff141b0..0000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2416.c +++ /dev/null @@ -1,348 +0,0 @@ -/* linux/arch/arm/mach-s3c2416/irq.c - * - * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, - * as part of OpenInkpot project - * Copyright (c) 2009 Promwad Innovation Company - * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) - -static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len) -{ - unsigned int subsrc, submsk; - unsigned int end; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= (irq - S3C2410_IRQSUB(0)); - subsrc &= (1 << len)-1; - - end = len + irq; - - for (; irq < end && subsrc; irq++) { - if (subsrc & 1) - generic_handle_irq(irq); - - subsrc >>= 1; - } -} - -/* WDT/AC97 sub interrupts */ - -static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc) -{ - s3c2416_irq_demux(IRQ_S3C2443_WDT, 4); -} - -#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0)) -#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97) - -static void s3c2416_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97); -} - -static void s3c2416_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97); -} - -static void s3c2416_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97); -} - -static struct irq_chip s3c2416_irq_wdtac97 = { - .irq_mask = s3c2416_irq_wdtac97_mask, - .irq_unmask = s3c2416_irq_wdtac97_unmask, - .irq_ack = s3c2416_irq_wdtac97_ack, -}; - -/* LCD sub interrupts */ - -static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc) -{ - s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4); -} - -#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) -#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4) - -static void s3c2416_irq_lcd_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD); -} - -static void s3c2416_irq_lcd_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_LCD); -} - -static void s3c2416_irq_lcd_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD); -} - -static struct irq_chip s3c2416_irq_lcd = { - .irq_mask = s3c2416_irq_lcd_mask, - .irq_unmask = s3c2416_irq_lcd_unmask, - .irq_ack = s3c2416_irq_lcd_ack, -}; - -/* DMA sub interrupts */ - -static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc) -{ - s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6); -} - -#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0)) -#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5) - - -static void s3c2416_irq_dma_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA); -} - -static void s3c2416_irq_dma_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_DMA); -} - -static void s3c2416_irq_dma_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA); -} - -static struct irq_chip s3c2416_irq_dma = { - .irq_mask = s3c2416_irq_dma_mask, - .irq_unmask = s3c2416_irq_dma_unmask, - .irq_ack = s3c2416_irq_dma_ack, -}; - -/* UART3 sub interrupts */ - -static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) -{ - s3c2416_irq_demux(IRQ_S3C2443_RX3, 3); -} - -#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) -#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) - -static void s3c2416_irq_uart3_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3); -} - -static void s3c2416_irq_uart3_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_UART3); -} - -static void s3c2416_irq_uart3_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3); -} - -static struct irq_chip s3c2416_irq_uart3 = { - .irq_mask = s3c2416_irq_uart3_mask, - .irq_unmask = s3c2416_irq_uart3_unmask, - .irq_ack = s3c2416_irq_uart3_ack, -}; - -/* second interrupt register */ - -static inline void s3c2416_irq_ack_second(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D); - - __raw_writel(bitval, S3C2416_SRCPND2); - __raw_writel(bitval, S3C2416_INTPND2); -} - -static void s3c2416_irq_mask_second(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D); - unsigned long mask; - - mask = __raw_readl(S3C2416_INTMSK2); - mask |= bitval; - __raw_writel(mask, S3C2416_INTMSK2); -} - -static void s3c2416_irq_unmask_second(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D); - unsigned long mask; - - mask = __raw_readl(S3C2416_INTMSK2); - mask &= ~bitval; - __raw_writel(mask, S3C2416_INTMSK2); -} - -struct irq_chip s3c2416_irq_second = { - .irq_ack = s3c2416_irq_ack_second, - .irq_mask = s3c2416_irq_mask_second, - .irq_unmask = s3c2416_irq_unmask_second, -}; - - -/* IRQ initialisation code */ - -static int s3c2416_add_sub(unsigned int base, - void (*demux)(unsigned int, - struct irq_desc *), - struct irq_chip *chip, - unsigned int start, unsigned int end) -{ - unsigned int irqno; - - irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq); - irq_set_chained_handler(base, demux); - - for (irqno = start; irqno <= end; irqno++) { - irq_set_chip_and_handler(irqno, chip, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static void s3c2416_irq_add_second(void) -{ - unsigned long pend; - unsigned long last; - int irqno; - int i; - - /* first, clear all interrupts pending... */ - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2416_INTPND2); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, S3C2416_SRCPND2); - __raw_writel(pend, S3C2416_INTPND2); - printk(KERN_INFO "irq: clearing pending status %08x\n", - (int)pend); - last = pend; - } - - for (irqno = IRQ_S3C2416_2D; irqno <= IRQ_S3C2416_I2S1; irqno++) { - switch (irqno) { - case IRQ_S3C2416_RESERVED2: - case IRQ_S3C2416_RESERVED3: - /* no IRQ here */ - break; - default: - irq_set_chip_and_handler(irqno, &s3c2416_irq_second, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - } -} - -static int s3c2416_irq_add(struct device *dev, - struct subsys_interface *sif) -{ - printk(KERN_INFO "S3C2416: IRQ Support\n"); - - s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd, - IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4); - - s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma, - &s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5); - - s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3, - &s3c2416_irq_uart3, - IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3); - - s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97, - &s3c2416_irq_wdtac97, - IRQ_S3C2443_WDT, IRQ_S3C2443_AC97); - - s3c2416_irq_add_second(); - - return 0; -} - -static struct subsys_interface s3c2416_irq_interface = { - .name = "s3c2416_irq", - .subsys = &s3c2416_subsys, - .add_dev = s3c2416_irq_add, -}; - -static int __init s3c2416_irq_init(void) -{ - return subsys_interface_register(&s3c2416_irq_interface); -} - -arch_initcall(s3c2416_irq_init); - -#ifdef CONFIG_PM -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2416_INTMSK2), -}; - -int s3c2416_irq_suspend(void) -{ - s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - - return 0; -} - -void s3c2416_irq_resume(void) -{ - s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); -} - -struct syscore_ops s3c2416_irq_syscore_ops = { - .suspend = s3c2416_irq_suspend, - .resume = s3c2416_irq_resume, -}; -#endif diff --git a/arch/arm/mach-s3c24xx/irq-s3c2443.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c deleted file mode 100644 index 5e69109..0000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2443.c +++ /dev/null @@ -1,281 +0,0 @@ -/* linux/arch/arm/mach-s3c2443/irq.c - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) - -static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len) -{ - unsigned int subsrc, submsk; - unsigned int end; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= (irq - S3C2410_IRQSUB(0)); - subsrc &= (1 << len)-1; - - end = len + irq; - - for (; irq < end && subsrc; irq++) { - if (subsrc & 1) - generic_handle_irq(irq); - - subsrc >>= 1; - } -} - -/* WDT/AC97 sub interrupts */ - -static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc) -{ - s3c2443_irq_demux(IRQ_S3C2443_WDT, 4); -} - -#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0)) -#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97) - -static void s3c2443_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97); -} - -static void s3c2443_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97); -} - -static void s3c2443_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97); -} - -static struct irq_chip s3c2443_irq_wdtac97 = { - .irq_mask = s3c2443_irq_wdtac97_mask, - .irq_unmask = s3c2443_irq_wdtac97_unmask, - .irq_ack = s3c2443_irq_wdtac97_ack, -}; - -/* LCD sub interrupts */ - -static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc) -{ - s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4); -} - -#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) -#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4) - -static void s3c2443_irq_lcd_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD); -} - -static void s3c2443_irq_lcd_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_LCD); -} - -static void s3c2443_irq_lcd_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD); -} - -static struct irq_chip s3c2443_irq_lcd = { - .irq_mask = s3c2443_irq_lcd_mask, - .irq_unmask = s3c2443_irq_lcd_unmask, - .irq_ack = s3c2443_irq_lcd_ack, -}; - -/* DMA sub interrupts */ - -static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc) -{ - s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6); -} - -#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0)) -#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5) - -static void s3c2443_irq_dma_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA); -} - -static void s3c2443_irq_dma_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_DMA); -} - -static void s3c2443_irq_dma_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA); -} - -static struct irq_chip s3c2443_irq_dma = { - .irq_mask = s3c2443_irq_dma_mask, - .irq_unmask = s3c2443_irq_dma_unmask, - .irq_ack = s3c2443_irq_dma_ack, -}; - -/* UART3 sub interrupts */ - -static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) -{ - s3c2443_irq_demux(IRQ_S3C2443_RX3, 3); -} - -#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) -#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) - -static void s3c2443_irq_uart3_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3); -} - -static void s3c2443_irq_uart3_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_UART3); -} - -static void s3c2443_irq_uart3_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3); -} - -static struct irq_chip s3c2443_irq_uart3 = { - .irq_mask = s3c2443_irq_uart3_mask, - .irq_unmask = s3c2443_irq_uart3_unmask, - .irq_ack = s3c2443_irq_uart3_ack, -}; - -/* CAM sub interrupts */ - -static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc) -{ - s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4); -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) -#define SUBMSK_CAM INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P) - -static void s3c2443_irq_cam_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CAM, SUBMSK_CAM); -} - -static void s3c2443_irq_cam_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CAM); -} - -static void s3c2443_irq_cam_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CAM, SUBMSK_CAM); -} - -static struct irq_chip s3c2443_irq_cam = { - .irq_mask = s3c2443_irq_cam_mask, - .irq_unmask = s3c2443_irq_cam_unmask, - .irq_ack = s3c2443_irq_cam_ack, -}; - -/* IRQ initialisation code */ - -static int s3c2443_add_sub(unsigned int base, - void (*demux)(unsigned int, - struct irq_desc *), - struct irq_chip *chip, - unsigned int start, unsigned int end) -{ - unsigned int irqno; - - irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq); - irq_set_chained_handler(base, demux); - - for (irqno = start; irqno <= end; irqno++) { - irq_set_chip_and_handler(irqno, chip, handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static int s3c2443_irq_add(struct device *dev, - struct subsys_interface *sif) -{ - printk("S3C2443: IRQ Support\n"); - - s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam, - IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P); - - s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd, - IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4); - - s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma, - &s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5); - - s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3, - &s3c2443_irq_uart3, - IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3); - - s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97, - &s3c2443_irq_wdtac97, - IRQ_S3C2443_WDT, IRQ_S3C2443_AC97); - - return 0; -} - -static struct subsys_interface s3c2443_irq_interface = { - .name = "s3c2443_irq", - .subsys = &s3c2443_subsys, - .add_dev = s3c2443_irq_add, -}; - -static int __init s3c2443_irq_init(void) -{ - return subsys_interface_register(&s3c2443_irq_interface); -} - -arch_initcall(s3c2443_irq_init); - diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c new file mode 100644 index 0000000..cb9f5e0 --- /dev/null +++ b/arch/arm/mach-s3c24xx/irq.c @@ -0,0 +1,822 @@ +/* + * S3C24XX IRQ handling + * + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/irqdomain.h> + +#include <asm/mach/irq.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> + +#include <plat/cpu.h> +#include <plat/regs-irqtype.h> +#include <plat/pm.h> +#include <plat/irq.h> + +#define S3C_IRQTYPE_NONE 0 +#define S3C_IRQTYPE_EINT 1 +#define S3C_IRQTYPE_EDGE 2 +#define S3C_IRQTYPE_LEVEL 3 + +struct s3c_irq_data { + unsigned int type; + unsigned long parent_irq; + + /* data gets filled during init */ + struct s3c_irq_intc *intc; + unsigned long sub_bits; + struct s3c_irq_intc *sub_intc; +}; + +/* + * Sructure holding the controller data + * @reg_pending register holding pending irqs + * @reg_intpnd special register intpnd in main intc + * @reg_mask mask register + * @domain irq_domain of the controller + * @parent parent controller for ext and sub irqs + * @irqs irq-data, always s3c_irq_data[32] + */ +struct s3c_irq_intc { + void __iomem *reg_pending; + void __iomem *reg_intpnd; + void __iomem *reg_mask; + struct irq_domain *domain; + struct s3c_irq_intc *parent; + struct s3c_irq_data *irqs; +}; + +static void s3c_irq_mask(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; + struct s3c_irq_data *parent_data; + unsigned long mask; + unsigned int irqno; + + mask = __raw_readl(intc->reg_mask); + mask |= (1UL << data->hwirq); + __raw_writel(mask, intc->reg_mask); + + if (parent_intc && irq_data->parent_irq) { + parent_data = &parent_intc->irqs[irq_data->parent_irq]; + + /* check to see if we need to mask the parent IRQ */ + if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + s3c_irq_mask(irq_get_irq_data(irqno)); + } + } +} + +static void s3c_irq_unmask(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; + unsigned long mask; + unsigned int irqno; + + mask = __raw_readl(intc->reg_mask); + mask &= ~(1UL << data->hwirq); + __raw_writel(mask, intc->reg_mask); + + if (parent_intc && irq_data->parent_irq) { + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + s3c_irq_unmask(irq_get_irq_data(irqno)); + } +} + +static inline void s3c_irq_ack(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + unsigned long bitval = 1UL << data->hwirq; + + __raw_writel(bitval, intc->reg_pending); + if (intc->reg_intpnd) + __raw_writel(bitval, intc->reg_intpnd); +} + +static int s3c_irqext_type_set(void __iomem *gpcon_reg, + void __iomem *extint_reg, + unsigned long gpcon_offset, + unsigned long extint_offset, + unsigned int type) +{ + unsigned long newvalue = 0, value; + + /* Set the GPIO to external interrupt mode */ + value = __raw_readl(gpcon_reg); + value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); + __raw_writel(value, gpcon_reg); + + /* Set the external interrupt to pointed trigger type */ + switch (type) + { + case IRQ_TYPE_NONE: + pr_warn("No edge setting!\n"); + break; + + case IRQ_TYPE_EDGE_RISING: + newvalue = S3C2410_EXTINT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S3C2410_EXTINT_FALLEDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S3C2410_EXTINT_BOTHEDGE; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S3C2410_EXTINT_LOWLEV; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S3C2410_EXTINT_HILEV; + break; + + default: + pr_err("No such irq type %d", type); + return -EINVAL; + } + + value = __raw_readl(extint_reg); + value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); + __raw_writel(value, extint_reg); + + return 0; +} + +/* FIXME: make static when it's out of plat-samsung/irq.h */ +int s3c_irqext_type(struct irq_data *data, unsigned int type) +{ + void __iomem *extint_reg; + void __iomem *gpcon_reg; + unsigned long gpcon_offset, extint_offset; + + if ((data->hwirq >= 4) && (data->hwirq <= 7)) { + gpcon_reg = S3C2410_GPFCON; + extint_reg = S3C24XX_EXTINT0; + gpcon_offset = (data->hwirq) * 2; + extint_offset = (data->hwirq) * 4; + } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) { + gpcon_reg = S3C2410_GPGCON; + extint_reg = S3C24XX_EXTINT1; + gpcon_offset = (data->hwirq - 8) * 2; + extint_offset = (data->hwirq - 8) * 4; + } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) { + gpcon_reg = S3C2410_GPGCON; + extint_reg = S3C24XX_EXTINT2; + gpcon_offset = (data->hwirq - 8) * 2; + extint_offset = (data->hwirq - 16) * 4; + } else { + return -EINVAL; + } + + return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, + extint_offset, type); +} + +static int s3c_irqext0_type(struct irq_data *data, unsigned int type) +{ + void __iomem *extint_reg; + void __iomem *gpcon_reg; + unsigned long gpcon_offset, extint_offset; + + if ((data->hwirq >= 0) && (data->hwirq <= 3)) { + gpcon_reg = S3C2410_GPFCON; + extint_reg = S3C24XX_EXTINT0; + gpcon_offset = (data->hwirq) * 2; + extint_offset = (data->hwirq) * 4; + } else { + return -EINVAL; + } + + return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, + extint_offset, type); +} + +struct irq_chip s3c_irq_chip = { + .name = "s3c", + .irq_ack = s3c_irq_ack, + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_set_wake = s3c_irq_wake +}; + +struct irq_chip s3c_irq_level_chip = { + .name = "s3c-level", + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_ack = s3c_irq_ack, +}; + +static struct irq_chip s3c_irqext_chip = { + .name = "s3c-ext", + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_ack = s3c_irq_ack, + .irq_set_type = s3c_irqext_type, + .irq_set_wake = s3c_irqext_wake +}; + +static struct irq_chip s3c_irq_eint0t4 = { + .name = "s3c-ext0", + .irq_ack = s3c_irq_ack, + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_set_wake = s3c_irq_wake, + .irq_set_type = s3c_irqext0_type, +}; + +static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; + struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; + struct s3c_irq_intc *sub_intc = irq_data->sub_intc; + unsigned long src; + unsigned long msk; + unsigned int n; + + chained_irq_enter(chip, desc); + + src = __raw_readl(sub_intc->reg_pending); + msk = __raw_readl(sub_intc->reg_mask); + + src &= ~msk; + src &= irq_data->sub_bits; + + while (src) { + n = __ffs(src); + src &= ~(1 << n); + generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); + } + + chained_irq_exit(chip, desc); +} + +#ifdef CONFIG_FIQ +/** + * s3c24xx_set_fiq - set the FIQ routing + * @irq: IRQ number to route to FIQ on processor. + * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. + * + * Change the state of the IRQ to FIQ routing depending on @irq and @on. If + * @on is true, the @irq is checked to see if it can be routed and the + * interrupt controller updated to route the IRQ. If @on is false, the FIQ + * routing is cleared, regardless of which @irq is specified. + */ +int s3c24xx_set_fiq(unsigned int irq, bool on) +{ + u32 intmod; + unsigned offs; + + if (on) { + offs = irq - FIQ_START; + if (offs > 31) + return -EINVAL; + + intmod = 1 << offs; + } else { + intmod = 0; + } + + __raw_writel(intmod, S3C2410_INTMOD); + return 0; +} + +EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); +#endif + +static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct s3c_irq_intc *intc = h->host_data; + struct s3c_irq_data *irq_data = &intc->irqs[hw]; + struct s3c_irq_intc *parent_intc; + struct s3c_irq_data *parent_irq_data; + unsigned int irqno; + + if (!intc) { + pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw); + return -EINVAL; + } + + if (!irq_data) { + pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw); + return -EINVAL; + } + + /* attach controller pointer to irq_data */ + irq_data->intc = intc; + + /* set handler and flags */ + switch (irq_data->type) { + case S3C_IRQTYPE_NONE: + return 0; + case S3C_IRQTYPE_EINT: + if (irq_data->parent_irq) + irq_set_chip_and_handler(virq, &s3c_irqext_chip, + handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_eint0t4, + handle_edge_irq); + break; + case S3C_IRQTYPE_EDGE: + if (irq_data->parent_irq || + intc->reg_pending == S3C2416_SRCPND2) + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_chip, + handle_edge_irq); + break; + case S3C_IRQTYPE_LEVEL: + if (irq_data->parent_irq) + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_level_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_chip, + handle_level_irq); + break; + default: + pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); + return -EINVAL; + } + set_irq_flags(virq, IRQF_VALID); + + if (irq_data->parent_irq) { + parent_intc = intc->parent; + if (!parent_intc) { + pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n", + hw); + goto err; + } + + parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; + if (!irq_data) { + pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", + hw); + goto err; + } + + parent_irq_data->sub_intc = intc; + parent_irq_data->sub_bits |= (1UL << hw); + + /* attach the demuxer to the parent irq */ + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + if (!irqno) { + pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", + irq_data->parent_irq); + goto err; + } + irq_set_chained_handler(irqno, s3c_irq_demux); + } + + return 0; + +err: + set_irq_flags(virq, 0); + + /* the only error can result from bad mapping data*/ + return -EINVAL; +} + +static struct irq_domain_ops s3c24xx_irq_ops = { + .map = s3c24xx_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) +{ + void __iomem *reg_source; + unsigned long pend; + unsigned long last; + int i; + + /* if intpnd is set, read the next pending irq from there */ + reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending; + + last = 0; + for (i = 0; i < 4; i++) { + pend = __raw_readl(reg_source); + + if (pend == 0 || pend == last) + break; + + __raw_writel(pend, intc->reg_pending); + if (intc->reg_intpnd) + __raw_writel(pend, intc->reg_intpnd); + + pr_info("irq: clearing pending status %08x\n", (int)pend); + last = pend; + } +} + +struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, + struct s3c_irq_data *irq_data, + struct s3c_irq_intc *parent, + unsigned long address) +{ + struct s3c_irq_intc *intc; + void __iomem *base = (void *)0xf6000000; /* static mapping */ + int irq_num; + int irq_start; + int irq_offset; + int ret; + + intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); + if (!intc) + return ERR_PTR(-ENOMEM); + + intc->irqs = irq_data; + + if (parent) + intc->parent = parent; + + /* select the correct data for the controller. + * Need to hard code the irq num start and offset + * to preserve the static mapping for now + */ + switch (address) { + case 0x4a000000: + pr_debug("irq: found main intc\n"); + intc->reg_pending = base; + intc->reg_mask = base + 0x08; + intc->reg_intpnd = base + 0x10; + irq_num = 32; + irq_start = S3C2410_IRQ(0); + irq_offset = 0; + break; + case 0x4a000018: + pr_debug("irq: found subintc\n"); + intc->reg_pending = base + 0x18; + intc->reg_mask = base + 0x1c; + irq_num = 29; + irq_start = S3C2410_IRQSUB(0); + irq_offset = 0; + break; + case 0x4a000040: + pr_debug("irq: found intc2\n"); + intc->reg_pending = base + 0x40; + intc->reg_mask = base + 0x48; + intc->reg_intpnd = base + 0x50; + irq_num = 8; + irq_start = S3C2416_IRQ(0); + irq_offset = 0; + break; + case 0x560000a4: + pr_debug("irq: found eintc\n"); + base = (void *)0xfd000000; + + intc->reg_mask = base + 0xa4; + intc->reg_pending = base + 0x08; + irq_num = 20; + irq_start = S3C2410_IRQ(32); + irq_offset = 4; + break; + default: + pr_err("irq: unsupported controller address\n"); + ret = -EINVAL; + goto err; + } + + /* now that all the data is complete, init the irq-domain */ + s3c24xx_clear_intc(intc); + intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, + irq_offset, &s3c24xx_irq_ops, + intc); + if (!intc->domain) { + pr_err("irq: could not create irq-domain\n"); + ret = -EINVAL; + goto err; + } + + return intc; + +err: + kfree(intc); + return ERR_PTR(ret); +} + +/* s3c24xx_init_irq + * + * Initialise S3C2410 IRQ system +*/ + +static struct s3c_irq_data init_base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_eint[32] = { + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ +}; + +static struct s3c_irq_data init_subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ +}; + +void __init s3c24xx_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); +} + +#ifdef CONFIG_CPU_S3C2416 +static struct s3c_irq_data init_s3c2416base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ + { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2416subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +static struct s3c_irq_data init_s3c2416_second[32] = { + { .type = S3C_IRQTYPE_EDGE }, /* 2D */ + { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ + { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ + { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ + { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ +}; + +void __init s3c2416_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2416: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); + + s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); +} + +#endif + +#ifdef CONFIG_CPU_S3C2443 +static struct s3c_irq_data init_s3c2443base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ + { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* CFON */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + + +static struct s3c_irq_data init_s3c2443subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +void __init s3c2443_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2443: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); +} +#endif diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index f4ad99c..0e0279e 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -237,6 +237,6 @@ MACHINE_START(AML_M5900, "AML_M5900") .map_io = amlm5900_map_io, .init_irq = s3c24xx_init_irq, .init_machine = amlm5900_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 1ee8c46..bb595f1 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -28,17 +28,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/anubis-map.h> -#include <mach/anubis-irq.h> -#include <mach/anubis-cpld.h> - #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -55,8 +50,9 @@ #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> -#include "simtec.h" +#include "anubis.h" #include "common.h" +#include "simtec.h" #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics" @@ -237,7 +233,7 @@ static struct pata_platform_info anubis_ide_platdata = { static struct resource anubis_ide0_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32), [2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32), - [3] = DEFINE_RES_IRQ(IRQ_IDE0), + [3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0), }; static struct platform_device anubis_device_ide0 = { @@ -254,7 +250,7 @@ static struct platform_device anubis_device_ide0 = { static struct resource anubis_ide1_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32), [1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32), - [2] = DEFINE_RES_IRQ(IRQ_IDE0), + [2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0), }; static struct platform_device anubis_device_ide1 = { @@ -279,7 +275,7 @@ static struct ax_plat_data anubis_asix_platdata = { static struct resource anubis_asix_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20), - [1] = DEFINE_RES_IRQ(IRQ_ASIX), + [1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX), }; static struct platform_device anubis_device_asix = { @@ -448,6 +444,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .map_io = anubis_map_io, .init_machine = anubis_init, .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index 00381fe..b4bc60c 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/list.h> #include <linux/timer.h> @@ -34,7 +35,6 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -210,6 +210,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .map_io = at2440evb_map_io, .init_machine = at2440evb_init, .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index 6a30ce7..ca66180 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -24,48 +24,41 @@ #include <linux/ata_platform.h> #include <linux/i2c.h> #include <linux/io.h> +#include <linux/serial_8250.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <linux/platform_data/hwmon-s3c.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> #include <net/ax88796.h> +#include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> - -#include <mach/bast-map.h> -#include <mach/bast-irq.h> -#include <mach/bast-cpld.h> - -#include <mach/hardware.h> -#include <asm/irq.h> #include <asm/mach-types.h> -//#include <asm/debug-ll.h> -#include <plat/regs-serial.h> +#include <mach/fb.h> +#include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <linux/platform_data/hwmon-s3c.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <mach/fb.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include <linux/serial_8250.h> - #include <plat/clock.h> -#include <plat/devs.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> +#include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <plat/regs-serial.h> -#include "simtec.h" +#include "bast.h" #include "common.h" +#include "simtec.h" #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics" @@ -312,7 +305,7 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = { static struct resource bast_dm9k_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4), [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40), - [2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \ + [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \ | IORESOURCE_IRQ_HIGHLEVEL), }; @@ -343,7 +336,7 @@ static struct platform_device bast_device_dm9k = { static struct plat_serial8250_port bast_sio_data[] = { [0] = { .mapbase = SERIAL_BASE + 0x2f8, - .irq = IRQ_PCSERIAL1, + .irq = BAST_IRQ_PCSERIAL1, .flags = SERIAL_FLAGS, .iotype = UPIO_MEM, .regshift = 0, @@ -351,7 +344,7 @@ static struct plat_serial8250_port bast_sio_data[] = { }, [1] = { .mapbase = SERIAL_BASE + 0x3f8, - .irq = IRQ_PCSERIAL2, + .irq = BAST_IRQ_PCSERIAL2, .flags = SERIAL_FLAGS, .iotype = UPIO_MEM, .regshift = 0, @@ -390,7 +383,7 @@ static struct ax_plat_data bast_asix_platdata = { static struct resource bast_asix_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20), [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1), - [2] = DEFINE_RES_IRQ(IRQ_ASIX), + [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX), }; static struct platform_device bast_device_asix = { @@ -612,6 +605,6 @@ MACHINE_START(BAST, "Simtec-BAST") .map_io = bast_map_io, .init_irq = s3c24xx_init_irq, .init_machine = bast_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index 973b87c..a25e8c5 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-s3c2442/mach-gta02.c - * * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner. * * Copyright (C) 2006-2009 by Openmoko, Inc. @@ -23,7 +21,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * */ #include <linux/kernel.h> @@ -34,62 +31,59 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/gpio_keys.h> #include <linux/workqueue.h> #include <linux/platform_device.h> #include <linux/serial_core.h> -#include <linux/spi/spi.h> -#include <linux/spi/s3c24xx.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/i2c.h> #include <linux/mmc/host.h> +#include <linux/mfd/pcf50633/adc.h> +#include <linux/mfd/pcf50633/backlight.h> +#include <linux/mfd/pcf50633/core.h> +#include <linux/mfd/pcf50633/gpio.h> +#include <linux/mfd/pcf50633/mbc.h> +#include <linux/mfd/pcf50633/pmic.h> + #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <linux/io.h> -#include <linux/i2c.h> #include <linux/regulator/machine.h> -#include <linux/mfd/pcf50633/core.h> -#include <linux/mfd/pcf50633/mbc.h> -#include <linux/mfd/pcf50633/adc.h> -#include <linux/mfd/pcf50633/gpio.h> -#include <linux/mfd/pcf50633/pmic.h> -#include <linux/mfd/pcf50633/backlight.h> - -#include <linux/input.h> -#include <linux/gpio_keys.h> +#include <linux/spi/spi.h> +#include <linux/spi/s3c24xx.h> +#include <asm/irq.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <asm/irq.h> -#include <asm/mach-types.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/usb-ohci-s3c2410.h> +#include <linux/platform_data/usb-s3c2410_udc.h> -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> #include <mach/fb.h> - -#include <linux/platform_data/usb-ohci-s3c2410.h> -#include <mach/regs-mem.h> #include <mach/hardware.h> +#include <mach/regs-gpio.h> +#include <mach/regs-irq.h> -#include <mach/gta02.h> - -#include <plat/regs-serial.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <plat/devs.h> #include <plat/cpu.h> -#include <plat/pm.h> -#include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/devs.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/touchscreen-s3c2410.h> +#include <plat/pm.h> +#include <plat/regs-serial.h> #include "common.h" +#include "gta02.h" static struct pcf50633 *gta02_pcf; @@ -595,6 +589,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .map_io = gta02_map_io, .init_irq = s3c24xx_init_irq, .init_machine = gta02_machine_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index b23dd1b..79bc083 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-h1940.c - * +/* * Copyright (c) 2003-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -37,40 +36,36 @@ #include <linux/mmc/host.h> #include <linux/export.h> +#include <asm/irq.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <plat/regs-serial.h> -#include <mach/regs-lcd.h> -#include <mach/regs-clock.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mmc-s3cmci.h> +#include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/usb-s3c2410_udc.h> -#include <mach/regs-gpio.h> -#include <mach/gpio-fns.h> -#include <mach/gpio-nrs.h> +#include <sound/uda1380.h> -#include <mach/h1940.h> -#include <mach/h1940-latch.h> #include <mach/fb.h> -#include <linux/platform_data/usb-s3c2410_udc.h> -#include <linux/platform_data/i2c-s3c2410.h> +#include <mach/hardware.h> +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> +#include <mach/regs-lcd.h> -#include <plat/gpio-cfg.h> #include <plat/clock.h> -#include <plat/devs.h> #include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/gpio-cfg.h> #include <plat/pll.h> #include <plat/pm.h> -#include <linux/platform_data/mmc-s3cmci.h> -#include <linux/platform_data/touchscreen-s3c2410.h> +#include <plat/regs-serial.h> -#include <sound/uda1380.h> #include "common.h" +#include "h1940.h" #define H1940_LATCH ((void __force __iomem *)0xF8000000) @@ -746,6 +741,6 @@ MACHINE_START(H1940, "IPAQ-H1940") .reserve = h1940_reserve, .init_irq = h1940_init_irq, .init_machine = h1940_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index c9954e2..54e83c1 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -35,9 +35,7 @@ #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <mach/regs-power.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/fb.h> @@ -56,6 +54,8 @@ #include <plat/pm.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include "s3c2412-power.h" + static struct map_desc jive_iodesc[] __initdata = { }; @@ -661,6 +661,6 @@ MACHINE_START(JIVE, "JIVE") .init_irq = s3c24xx_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index a31d5b8..2865e59 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -40,7 +40,6 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> #include <linux/platform_data/leds-s3c24xx.h> -#include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/irqs.h> #include <linux/platform_data/mtd-nand-s3c2410.h> @@ -688,6 +687,6 @@ MACHINE_START(MINI2440, "MINI2440") .map_io = mini2440_map_io, .init_machine = mini2440_init, .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index c53a9bf..d9d04b2 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -589,7 +589,7 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .init_machine = n30_init, .init_irq = s3c24xx_init_irq, .map_io = n30_map_io, @@ -600,7 +600,7 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .init_machine = n30_init, .init_irq = s3c24xx_init_irq, .map_io = n30_map_io, diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index a2b92b0..a454e24 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -153,6 +153,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .map_io = nexcoder_map_io, .init_machine = nexcoder_init, .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index bb36d83..ae2cbdf 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2440/mach-osiris.c - * +/* * Copyright (c) 2005-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -22,25 +21,16 @@ #include <linux/clk.h> #include <linux/i2c.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <linux/i2c/tps65010.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> - -#include <mach/osiris-map.h> -#include <mach/osiris-cpld.h> - -#include <mach/hardware.h> #include <asm/irq.h> -#include <asm/mach-types.h> -#include <plat/cpu-freq.h> -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> -#include <mach/regs-mem.h> -#include <mach/regs-lcd.h> #include <linux/platform_data/mtd-nand-s3c2410.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -49,12 +39,20 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/gpio-cfg.h> #include <plat/clock.h> -#include <plat/devs.h> #include <plat/cpu.h> +#include <plat/cpu-freq.h> +#include <plat/devs.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-serial.h> + +#include <mach/hardware.h> +#include <mach/regs-gpio.h> +#include <mach/regs-lcd.h> #include "common.h" +#include "osiris.h" +#include "regs-mem.h" /* onboard perihperal map */ @@ -428,6 +426,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .map_io = osiris_map_io, .init_irq = s3c24xx_init_irq, .init_machine = osiris_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index bca39f0..40a47d6 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-otom.c +/* * * Copyright (c) 2004 Nex Vision * Guillaume GOURAT <guillaume.gourat@nexvision.fr> @@ -6,7 +6,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * */ #include <linux/kernel.h> @@ -19,26 +18,25 @@ #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/platform_data/i2c-s3c2410.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/otom-map.h> - #include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <plat/s3c2410.h> #include <plat/clock.h> -#include <plat/devs.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/regs-serial.h> +#include <plat/s3c2410.h> #include "common.h" +#include "otom.h" static struct map_desc otom11_iodesc[] __initdata = { /* Device area */ @@ -118,6 +116,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .map_io = otom11_map_io, .init_machine = otom11_init, .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 7b6ba13..56175f0 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -343,6 +343,6 @@ MACHINE_START(QT2410, "QT2410") .map_io = qt2410_map_io, .init_irq = s3c24xx_init_irq, .init_machine = qt2410_machine_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 0606f2f..1f9ba2a 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2440/mach-rx1950.c - * +/* * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev, * Copyright (c) 2007-2010 Vasily Khoruzhick * @@ -37,31 +36,31 @@ #include <linux/mmc/host.h> +#include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach-types.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mmc-s3cmci.h> +#include <linux/platform_data/mtd-nand-s3c2410.h> +#include <linux/platform_data/touchscreen-s3c2410.h> +#include <linux/platform_data/usb-s3c2410_udc.h> + +#include <sound/uda1380.h> + +#include <mach/fb.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> -#include <mach/h1940.h> -#include <mach/fb.h> #include <plat/clock.h> -#include <plat/regs-serial.h> -#include <plat/regs-iic.h> -#include <linux/platform_data/mmc-s3cmci.h> -#include <linux/platform_data/usb-s3c2410_udc.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <plat/devs.h> #include <plat/cpu.h> +#include <plat/devs.h> #include <plat/pm.h> -#include <plat/irq.h> -#include <linux/platform_data/touchscreen-s3c2410.h> - -#include <sound/uda1380.h> +#include <plat/regs-iic.h> +#include <plat/regs-serial.h> #include "common.h" +#include "h1940.h" #define LCD_PWM_PERIOD 192960 #define LCD_PWM_DUTY 127353 @@ -814,6 +813,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .reserve = rx1950_reserve, .init_irq = s3c24xx_init_irq, .init_machine = rx1950_init_machine, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index dacbb9a..f20418a 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -31,27 +31,27 @@ #include <linux/mtd/partitions.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/mach/map.h> + +#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> +#include <mach/fb.h> +#include <mach/hardware.h> #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> -#include <mach/h1940.h> -#include <linux/platform_data/mtd-nand-s3c2410.h> -#include <mach/fb.h> - #include <plat/clock.h> -#include <plat/devs.h> #include <plat/cpu.h> +#include <plat/devs.h> #include <plat/pm.h> +#include <plat/regs-serial.h> #include "common.h" +#include "h1940.h" static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ @@ -212,6 +212,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .reserve = rx3715_reserve, .init_irq = rx3715_init_irq, .init_machine = rx3715_init_machine, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index 82796b9..e184bfa 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -117,6 +117,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc .map_io = smdk2410_map_io, .init_irq = s3c24xx_init_irq, .init_machine = smdk2410_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index ce99fd8..86d7847 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -37,7 +37,6 @@ #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> -#include <mach/idle.h> #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/i2c-s3c2410.h> #include <mach/fb.h> @@ -133,7 +132,7 @@ MACHINE_START(S3C2413, "S3C2413") .init_irq = s3c24xx_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -145,7 +144,7 @@ MACHINE_START(SMDK2412, "SMDK2412") .init_irq = s3c24xx_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -157,6 +156,6 @@ MACHINE_START(SMDK2413, "SMDK2413") .init_irq = s3c24xx_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index f30d7fc..ebb2e61 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -39,7 +39,6 @@ #include <mach/regs-lcd.h> #include <mach/regs-s3c2443-clock.h> -#include <mach/idle.h> #include <linux/platform_data/leds-s3c24xx.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -251,9 +250,9 @@ MACHINE_START(SMDK2416, "SMDK2416") /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index b7ff882..08cc38c 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -35,7 +35,6 @@ #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> -#include <mach/idle.h> #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -182,6 +181,6 @@ MACHINE_START(S3C2440, "SMDK2440") .init_irq = s3c24xx_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 2568656..fc65d74 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -35,7 +35,6 @@ #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> -#include <mach/idle.h> #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -141,9 +140,9 @@ MACHINE_START(SMDK2443, "SMDK2443") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 495bf5c..24b3d79 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -149,6 +149,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .map_io = tct_hammer_map_io, .init_irq = s3c24xx_init_irq, .init_machine = tct_hammer_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 14d5b12..ec42d1e 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/mach-vr1000.c - * +/* * Copyright (c) 2003-2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -32,27 +31,25 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/bast-map.h> -#include <mach/vr1000-map.h> -#include <mach/vr1000-irq.h> -#include <mach/vr1000-cpld.h> - -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> #include <linux/platform_data/leds-s3c24xx.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/asoc-s3c24xx_simtec.h> + +#include <mach/hardware.h> +#include <mach/regs-gpio.h> #include <plat/clock.h> -#include <plat/devs.h> #include <plat/cpu.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <plat/devs.h> +#include <plat/regs-serial.h> -#include "simtec.h" +#include "bast.h" #include "common.h" +#include "simtec.h" +#include "vr1000.h" /* macros for virtual address mods for the io space entries */ #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5) @@ -143,7 +140,7 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = { static struct plat_serial8250_port serial_platform_data[] = { [0] = { .mapbase = VR1000_SERIAL_MAPBASE(0), - .irq = IRQ_VR1000_SERIAL + 0, + .irq = VR1000_IRQ_SERIAL + 0, .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 0, @@ -151,7 +148,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, [1] = { .mapbase = VR1000_SERIAL_MAPBASE(1), - .irq = IRQ_VR1000_SERIAL + 1, + .irq = VR1000_IRQ_SERIAL + 1, .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 0, @@ -159,7 +156,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, [2] = { .mapbase = VR1000_SERIAL_MAPBASE(2), - .irq = IRQ_VR1000_SERIAL + 2, + .irq = VR1000_IRQ_SERIAL + 2, .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 0, @@ -167,7 +164,7 @@ static struct plat_serial8250_port serial_platform_data[] = { }, [3] = { .mapbase = VR1000_SERIAL_MAPBASE(3), - .irq = IRQ_VR1000_SERIAL + 3, + .irq = VR1000_IRQ_SERIAL + 3, .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 0, @@ -189,14 +186,14 @@ static struct platform_device serial_device = { static struct resource vr1000_dm9k0_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4), [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40), - [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000A, 1, NULL, IORESOURCE_IRQ \ + [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \ | IORESOURCE_IRQ_HIGHLEVEL), }; static struct resource vr1000_dm9k1_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4), [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40), - [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000N, 1, NULL, IORESOURCE_IRQ \ + [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \ | IORESOURCE_IRQ_HIGHLEVEL), }; @@ -357,6 +354,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .map_io = vr1000_map_io, .init_machine = vr1000_init, .init_irq = s3c24xx_init_irq, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index f1d44ae..3e2bfdd 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -36,7 +36,6 @@ #include <mach/regs-gpio.h> #include <mach/regs-lcd.h> -#include <mach/idle.h> #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> @@ -161,6 +160,6 @@ MACHINE_START(VSTMS, "VSTMS") .init_irq = s3c24xx_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h b/arch/arm/mach-s3c24xx/osiris.h index 17380f8..b8d5607 100644 --- a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h +++ b/arch/arm/mach-s3c24xx/osiris.h @@ -1,9 +1,9 @@ -/* arch/arm/mach-s3c2410/include/mach/osiris-map.h - * +/* * Copyright 2005 Simtec Electronics * http://www.simtec.co.uk/products/ * Ben Dooks <ben@simtec.co.uk> * + * OSIRIS - CPLD control constants * OSIRIS - Memory map definitions * * This program is free software; you can redistribute it and/or modify @@ -11,10 +11,21 @@ * published by the Free Software Foundation. */ -/* needs arch/map.h including with this */ +#ifndef __MACH_S3C24XX_OSIRIS_H +#define __MACH_S3C24XX_OSIRIS_H __FILE__ + +/* CTRL0 - NAND WP control */ + +#define OSIRIS_CTRL0_NANDSEL (0x3) +#define OSIRIS_CTRL0_BOOT_INT (1<<3) +#define OSIRIS_CTRL0_PCMCIA (1<<4) +#define OSIRIS_CTRL0_FIX8 (1<<5) +#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6) +#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7) + +#define OSIRIS_CTRL1_FIX8 (1<<0) -#ifndef __ASM_ARCH_OSIRISMAP_H -#define __ASM_ARCH_OSIRISMAP_H +#define OSIRIS_ID_REVMASK (0x7) /* start peripherals off after the S3C2410 */ @@ -39,4 +50,4 @@ #define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000) #define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23)) -#endif /* __ASM_ARCH_OSIRISMAP_H */ +#endif /* __MACH_S3C24XX_OSIRIS_H */ diff --git a/arch/arm/mach-s3c24xx/include/mach/otom-map.h b/arch/arm/mach-s3c24xx/otom.h index f9277a5..321b7be 100644 --- a/arch/arm/mach-s3c24xx/include/mach/otom-map.h +++ b/arch/arm/mach-s3c24xx/otom.h @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/otom-map.h - * +/* * (c) 2005 Guillaume GOURAT / NexVision * guillaume.gourat@nexvision.fr * @@ -10,21 +9,20 @@ * published by the Free Software Foundation. */ -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x01300000, now we need to find space for the +/* + * ok, we've used up to 0x01300000, now we need to find space for the * peripherals that live in the nGCS[x] areas, which are quite numerous * in their space. */ -#ifndef __ASM_ARCH_OTOMMAP_H -#define __ASM_ARCH_OTOMMAP_H +#ifndef __MACH_S3C24XX_OTOM_H +#define __MACH_S3C24XX_OTOM_H __FILE__ -#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */ -#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */ +#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */ +#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */ /* physical offset addresses for the peripherals */ -#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */ +#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) -#endif /* __ASM_ARCH_OTOMMAP_H */ +#endif /* __MACH_S3C24XX_OTOM_H */ diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c index e0b3b34..dcf3420 100644 --- a/arch/arm/mach-s3c2410/pll.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c2410/pll.c - * +/* * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -82,7 +81,6 @@ static int __init s3c2410_pll_init(void) return subsys_interface_register(&s3c2410_plls_interface); } - arch_initcall(s3c2410_pll_init); static struct subsys_interface s3c2410a_plls_interface = { @@ -95,5 +93,4 @@ static int __init s3c2410a_pll_init(void) { return subsys_interface_register(&s3c2410a_plls_interface); } - arch_initcall(s3c2410a_pll_init); diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c index 551fb43..6737817 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c - * +/* * Copyright (c) 2006-2007 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -83,7 +82,6 @@ static int __init s3c2440_pll_12mhz(void) return subsys_interface_register(&s3c2440_plls12_interface); } - arch_initcall(s3c2440_pll_12mhz); static struct subsys_interface s3c2442_plls12_interface = { @@ -97,5 +95,4 @@ static int __init s3c2442_pll_12mhz(void) return subsys_interface_register(&s3c2442_plls12_interface); } - arch_initcall(s3c2442_pll_12mhz); diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c index 3f15bcf..debfa10 100644 --- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c @@ -1,5 +1,4 @@ -/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c - * +/* * Copyright (c) 2006-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> @@ -111,7 +110,6 @@ static int __init s3c2440_pll_16934400(void) { return subsys_interface_register(&s3c2440_plls169344_interface); } - arch_initcall(s3c2440_pll_16934400); static struct subsys_interface s3c2442_plls169344_interface = { @@ -124,5 +122,4 @@ static int __init s3c2442_pll_16934400(void) { return subsys_interface_register(&s3c2442_plls169344_interface); } - arch_initcall(s3c2442_pll_16934400); diff --git a/arch/arm/mach-s3c24xx/pm-h1940.S b/arch/arm/mach-s3c24xx/pm-h1940.S index c93bf2d..6183a68 100644 --- a/arch/arm/mach-s3c24xx/pm-h1940.S +++ b/arch/arm/mach-s3c24xx/pm-h1940.S @@ -30,4 +30,4 @@ h1940_pm_return: mov r0, #S3C2410_PA_GPIO - ldr pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ] + ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO] diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c index 949ae05..2d82c4f 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c @@ -29,16 +29,16 @@ #include <linux/gpio.h> #include <linux/io.h> -#include <mach/hardware.h> - #include <asm/mach-types.h> +#include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <mach/h1940.h> #include <plat/cpu.h> #include <plat/pm.h> +#include "h1940.h" + static void s3c2410_pm_prepare(void) { /* ensure at least GSTATUS3 has the resume address */ diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index c60f67a..668a78a 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -21,19 +21,19 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/cacheflush.h> #include <asm/irq.h> -#include <mach/regs-power.h> +#include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <mach/regs-dsc.h> #include <plat/cpu.h> #include <plat/pm.h> - #include <plat/s3c2412.h> +#include "regs-dsc.h" +#include "s3c2412-power.h" + extern void s3c2412_sleep_enter(void); static int s3c2412_cpu_suspend(unsigned long arg) @@ -48,7 +48,8 @@ static int s3c2412_cpu_suspend(unsigned long arg) s3c2412_sleep_enter(); - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } static void s3c2412_pm_prepare(void) diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c index 1bd4817..4492389 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2416.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c @@ -16,12 +16,13 @@ #include <asm/cacheflush.h> -#include <mach/regs-power.h> #include <mach/regs-s3c2443-clock.h> #include <plat/cpu.h> #include <plat/pm.h> +#include "s3c2412-power.h" + extern void s3c2412_sleep_enter(void); static int s3c2416_cpu_suspend(unsigned long arg) @@ -34,7 +35,8 @@ static int s3c2416_cpu_suspend(unsigned long arg) s3c2412_sleep_enter(); - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } static void s3c2416_pm_prepare(void) diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 724755f..caa5b72 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -38,7 +38,6 @@ #include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <mach/regs-irq.h> #include <asm/mach/time.h> @@ -46,6 +45,8 @@ #include <plat/gpio-cfg.h> #include <plat/pm.h> +#include "regs-mem.h" + #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h index 98fd4a0..98fd4a0 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h +++ b/arch/arm/mach-s3c24xx/regs-dsc.h diff --git a/arch/arm/mach-s3c24xx/regs-mem.h b/arch/arm/mach-s3c24xx/regs-mem.h new file mode 100644 index 0000000..86b1258 --- /dev/null +++ b/arch/arm/mach-s3c24xx/regs-mem.h @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 Memory Control register definitions + */ + +#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H +#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__ + +#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) + +#define S3C2410_BWSCON S3C2410_MEMREG(0x00) +#define S3C2410_BANKCON0 S3C2410_MEMREG(0x04) +#define S3C2410_BANKCON1 S3C2410_MEMREG(0x08) +#define S3C2410_BANKCON2 S3C2410_MEMREG(0x0C) +#define S3C2410_BANKCON3 S3C2410_MEMREG(0x10) +#define S3C2410_BANKCON4 S3C2410_MEMREG(0x14) +#define S3C2410_BANKCON5 S3C2410_MEMREG(0x18) +#define S3C2410_BANKCON6 S3C2410_MEMREG(0x1C) +#define S3C2410_BANKCON7 S3C2410_MEMREG(0x20) +#define S3C2410_REFRESH S3C2410_MEMREG(0x24) +#define S3C2410_BANKSIZE S3C2410_MEMREG(0x28) + +#define S3C2410_BWSCON_ST1 (1 << 7) +#define S3C2410_BWSCON_ST2 (1 << 11) +#define S3C2410_BWSCON_ST3 (1 << 15) +#define S3C2410_BWSCON_ST4 (1 << 19) +#define S3C2410_BWSCON_ST5 (1 << 23) + +#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf) + +#define S3C2410_BWSCON_WS (1 << 2) + +#define S3C2410_BANKCON_PMC16 (0x3) + +#define S3C2410_BANKCON_Tacp_SHIFT (2) +#define S3C2410_BANKCON_Tcah_SHIFT (4) +#define S3C2410_BANKCON_Tcoh_SHIFT (6) +#define S3C2410_BANKCON_Tacc_SHIFT (8) +#define S3C2410_BANKCON_Tcos_SHIFT (11) +#define S3C2410_BANKCON_Tacs_SHIFT (13) + +#define S3C2410_BANKCON_SDRAM (0x3 << 15) + +#define S3C2410_REFRESH_SELF (1 << 22) + +#define S3C2410_BANKSIZE_MASK (0x7 << 0) + +#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */ diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index a3c5cb0..9ebef95 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -49,6 +49,8 @@ #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> +#include "common.h" + /* Initial IO mappings */ static struct map_desc s3c2410_iodesc[] __initdata = { @@ -182,8 +184,8 @@ int __init s3c2410_init(void) #ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); -#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); +#endif return device_register(&s3c2410_dev); } diff --git a/arch/arm/mach-s3c24xx/s3c2412-power.h b/arch/arm/mach-s3c24xx/s3c2412-power.h new file mode 100644 index 0000000..1b02c5d --- /dev/null +++ b/arch/arm/mach-s3c24xx/s3c2412-power.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H +#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__ + +#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR) + +#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20) +#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24) + +#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70) +#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74) +#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78) +#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C) + +#define S3C2412_PWRCFG_BATF_IRQ (1 << 0) +#define S3C2412_PWRCFG_BATF_IGNORE (2 << 0) +#define S3C2412_PWRCFG_BATF_SLEEP (3 << 0) +#define S3C2412_PWRCFG_BATF_MASK (3 << 0) + +#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0 << 6) +#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1 << 6) +#define S3C2412_PWRCFG_STANDBYWFI_STOP (2 << 6) +#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3 << 6) +#define S3C2412_PWRCFG_STANDBYWFI_MASK (3 << 6) + +#define S3C2412_PWRCFG_RTC_MASKIRQ (1 << 8) +#define S3C2412_PWRCFG_NAND_NORST (1 << 9) + +#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */ diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 6c5f403..0d59215 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s3c2412/s3c2412.c - * +/* * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -28,28 +27,31 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/hardware.h> #include <asm/proc-fns.h> #include <asm/irq.h> #include <asm/system_misc.h> -#include <plat/cpu-freq.h> - +#include <mach/hardware.h> #include <mach/regs-clock.h> -#include <plat/regs-serial.h> -#include <mach/regs-power.h> #include <mach/regs-gpio.h> -#include <mach/regs-dsc.h> -#include <plat/regs-spi.h> -#include <mach/regs-s3c2412.h> -#include <plat/s3c2412.h> +#include <plat/clock.h> #include <plat/cpu.h> +#include <plat/cpu-freq.h> #include <plat/devs.h> -#include <plat/clock.h> -#include <plat/pm.h> -#include <plat/pll.h> #include <plat/nand-core.h> +#include <plat/pll.h> +#include <plat/pm.h> +#include <plat/regs-serial.h> +#include <plat/regs-spi.h> +#include <plat/s3c2412.h> + +#include "common.h" +#include "regs-dsc.h" +#include "s3c2412-power.h" + +#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) +#define S3C2412_SWRST_RESET (0x533C2412) #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; @@ -244,8 +246,8 @@ int __init s3c2412_init(void) #ifdef CONFIG_PM register_syscore_ops(&s3c2412_pm_syscore_ops); -#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); +#endif return device_register(&s3c2412_dev); } diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/s3c2412.h new file mode 100644 index 0000000..548ced4 --- /dev/null +++ b/arch/arm/mach-s3c24xx/s3c2412.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H +#define __ARCH_ARM_REGS_S3C24XX_S3C2412_H __FILE__ + +#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) + +#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x)) +#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o))) + +#define S3C2412_REFRESH S3C2412_MEMREG(0x10) + +#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x4) + +#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x0) + +#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */ diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index 77ee0b7..e30476d 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -63,6 +63,8 @@ #include <plat/rtc-core.h> #include <plat/spi-core.h> +#include "common.h" + static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), IODESC_ENT(CLKPWR), @@ -105,9 +107,9 @@ int __init s3c2416_init(void) #ifdef CONFIG_PM register_syscore_ops(&s3c2416_pm_syscore_ops); -#endif register_syscore_ops(&s3c24xx_irq_syscore_ops); register_syscore_ops(&s3c2416_irq_syscore_ops); +#endif return device_register(&s3c2416_dev); } diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c index 2b3dddb..559e394 100644 --- a/arch/arm/mach-s3c24xx/s3c2440.c +++ b/arch/arm/mach-s3c24xx/s3c2440.c @@ -40,6 +40,8 @@ #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> +#include "common.h" + static struct device s3c2440_dev = { .bus = &s3c2440_subsys, }; @@ -57,9 +59,9 @@ int __init s3c2440_init(void) #ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); #endif register_syscore_ops(&s3c244x_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); /* register our system device for everything else */ diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 22cb7c9..f732826 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -51,6 +51,8 @@ #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> +#include "common.h" + /* S3C2442 extended clock support */ static unsigned long s3c2442_camif_upll_round(struct clk *clk, @@ -172,9 +174,9 @@ int __init s3c2442_init(void) #ifdef CONFIG_PM register_syscore_ops(&s3c2410_pm_syscore_ops); + register_syscore_ops(&s3c24xx_irq_syscore_ops); #endif register_syscore_ops(&s3c244x_pm_syscore_ops); - register_syscore_ops(&s3c24xx_irq_syscore_ops); return device_register(&s3c2442_dev); } diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index b0b60a1..ad2671b 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -36,7 +36,6 @@ #include <mach/regs-clock.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <mach/regs-dsc.h> #include <plat/s3c2410.h> #include <plat/s3c244x.h> @@ -48,6 +47,8 @@ #include <plat/nand-core.h> #include <plat/watchdog-reset.h> +#include "regs-dsc.h" + static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), IODESC_ENT(TIMER), diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c index fd0ef05..67cb512 100644 --- a/arch/arm/mach-s3c24xx/simtec-audio.c +++ b/arch/arm/mach-s3c24xx/simtec-audio.c @@ -17,16 +17,13 @@ #include <linux/device.h> #include <linux/io.h> -#include <mach/bast-map.h> -#include <mach/bast-irq.h> -#include <mach/bast-cpld.h> - #include <mach/hardware.h> #include <mach/regs-gpio.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> #include <plat/devs.h> +#include "bast.h" #include "simtec.h" /* platform ops for audio */ diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c24xx/simtec-nor.c index 029744fc..8884bff 100644 --- a/arch/arm/mach-s3c24xx/simtec-nor.c +++ b/arch/arm/mach-s3c24xx/simtec-nor.c @@ -27,9 +27,8 @@ #include <asm/mach/irq.h> #include <mach/map.h> -#include <mach/bast-map.h> -#include <mach/bast-cpld.h> +#include "bast.h" #include "simtec.h" static void simtec_nor_vpp(struct platform_device *pdev, int vpp) diff --git a/arch/arm/mach-s3c24xx/simtec-pm.c b/arch/arm/mach-s3c24xx/simtec-pm.c index 699f931..38a2f1f 100644 --- a/arch/arm/mach-s3c24xx/simtec-pm.c +++ b/arch/arm/mach-s3c24xx/simtec-pm.c @@ -28,12 +28,13 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/regs-mem.h> #include <asm/mach-types.h> #include <plat/pm.h> +#include "regs-mem.h" + #define COPYRIGHT ", Copyright 2005 Simtec Electronics" /* pm_simtec_init diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c index ddf7a3c..2ed2e32 100644 --- a/arch/arm/mach-s3c24xx/simtec-usb.c +++ b/arch/arm/mach-s3c24xx/simtec-usb.c @@ -28,15 +28,13 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/bast-map.h> -#include <mach/bast-irq.h> - #include <mach/hardware.h> #include <asm/irq.h> #include <linux/platform_data/usb-ohci-s3c2410.h> #include <plat/devs.h> +#include "bast.h" #include "simtec.h" /* control power and monitor over-current events on various Simtec @@ -79,7 +77,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on) int ret; if (on) { - ret = request_irq(IRQ_USBOC, usb_simtec_ocirq, + ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "USB Over-current", info); @@ -87,7 +85,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on) printk(KERN_ERR "failed to request usb oc irq\n"); } } else { - free_irq(IRQ_USBOC, info); + free_irq(BAST_IRQ_USBOC, info); } } diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index dd5b638..dd47c8f 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S @@ -31,9 +31,10 @@ #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <mach/regs-mem.h> #include <plat/regs-serial.h> +#include "regs-mem.h" + /* s3c2410_cpu_suspend * * put the cpu into sleep mode @@ -45,9 +46,9 @@ ENTRY(s3c2410_cpu_suspend) ldr r4, =S3C2410_REFRESH ldr r5, =S3C24XX_MISCCR ldr r6, =S3C2410_CLKCON - ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) - ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) - ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) + ldr r7, [r4] @ get REFRESH (and ensure in TLB) + ldr r8, [r5] @ get MISCCR (and ensure in TLB) + ldr r9, [r6] @ get CLKCON (and ensure in TLB) orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals @@ -61,8 +62,8 @@ ENTRY(s3c2410_cpu_suspend) @@ align next bit of code to cache line .align 5 s3c2410_do_sleep: - streq r7, [ r4 ] @ SDRAM sleep command - streq r8, [ r5 ] @ SDRAM power-down config - streq r9, [ r6 ] @ CPU sleep + streq r7, [r4] @ SDRAM sleep command + streq r8, [r5] @ SDRAM power-down config + streq r9, [r6] @ CPU sleep 1: beq 1b mov pc, r14 diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S index c82418e..5adaceb 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S @@ -57,12 +57,12 @@ s3c2412_sleep_enter1: * retry, as simply returning causes the system to lock. */ - ldrne r9, [ r1 ] - strne r9, [ r1 ] - ldrne r9, [ r2 ] - strne r9, [ r2 ] - ldrne r9, [ r3 ] - strne r9, [ r3 ] + ldrne r9, [r1] + strne r9, [r1] + ldrne r9, [r2] + strne r9, [r2] + ldrne r9, [r3] + strne r9, [r3] bne s3c2412_sleep_enter1 mov pc, r14 diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S index c5661256..7f378b6 100644 --- a/arch/arm/mach-s3c24xx/sleep.S +++ b/arch/arm/mach-s3c24xx/sleep.S @@ -31,7 +31,6 @@ #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <mach/regs-mem.h> #include <plat/regs-serial.h> /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not diff --git a/arch/arm/mach-s3c24xx/vr1000.h b/arch/arm/mach-s3c24xx/vr1000.h new file mode 100644 index 0000000..7fcd2c2f --- /dev/null +++ b/arch/arm/mach-s3c24xx/vr1000.h @@ -0,0 +1,118 @@ + +/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h + * + * Copyright (c) 2003 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * VR1000 - CPLD control constants + * Machine VR1000 - IRQ Number definitions + * Machine VR1000 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_S3C24XX_VR1000_H +#define __MACH_S3C24XX_VR1000_H __FILE__ + +#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ + +/* irq numbers to onboard peripherals */ + +#define VR1000_IRQ_USBOC IRQ_EINT19 +#define VR1000_IRQ_IDE0 IRQ_EINT16 +#define VR1000_IRQ_IDE1 IRQ_EINT17 +#define VR1000_IRQ_SERIAL IRQ_EINT12 +#define VR1000_IRQ_DM9000A IRQ_EINT10 +#define VR1000_IRQ_DM9000N IRQ_EINT9 +#define VR1000_IRQ_SMALERT IRQ_EINT8 + +/* map */ + +#define VR1000_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) + +/* we put the CPLD registers next, to get them out of the way */ + +#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ +#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) + +#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ +#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) + +#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ +#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) + +#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ +#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) + +/* next, we have the PC104 ISA interrupt registers */ + +#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ +#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) + +#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ +#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) + +#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ +#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) + +/* + * 0xE0000000 contains the IO space that is split by speed and + * whether the access is for 8 or 16bit IO... this ensures that + * the correct access is made + * + * 0x10000000 of space, partitioned as so: + * + * 0x00000000 to 0x04000000 8bit, slow + * 0x04000000 to 0x08000000 16bit, slow + * 0x08000000 to 0x0C000000 16bit, net + * 0x0C000000 to 0x10000000 16bit, fast + * + * each of these spaces has the following in: + * + * 0x02000000 to 0x02100000 1MB IDE primary channel + * 0x02100000 to 0x02200000 1MB IDE primary channel aux + * 0x02200000 to 0x02400000 1MB IDE secondary channel + * 0x02300000 to 0x02400000 1MB IDE secondary channel aux + * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers + * 0x02600000 to 0x02700000 1MB + * + * the phyiscal layout of the zones are: + * nGCS2 - 8bit, slow + * nGCS3 - 16bit, slow + * nGCS4 - 16bit, net + * nGCS5 - 16bit, fast + */ + +#define VR1000_VA_MULTISPACE (0xE0000000) + +#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) +#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) +#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) +#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) +#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) +#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) +#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) +#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) +#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) + +/* physical offset addresses for the peripherals */ + +#define VR1000_PA_IDEPRI (0x02000000) +#define VR1000_PA_IDEPRIAUX (0x02800000) +#define VR1000_PA_IDESEC (0x03000000) +#define VR1000_PA_IDESECAUX (0x03800000) +#define VR1000_PA_DM9000 (0x05000000) + +#define VR1000_PA_SERIAL (0x11800000) +#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) + +/* VR1000 ram is in CS1, with A26..A24 = 2_101 */ +#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) + +/* some configurations for the peripherals */ + +#define VR1000_DM9000_CS VR1000_VAM_CS4 + +#endif /* __MACH_S3C24XX_VR1000_H */ diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 803711e..8499415 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -23,7 +23,6 @@ #include <mach/hardware.h> #include <mach/map.h> -#include <mach/regs-sys.h> #include <mach/regs-clock.h> #include <plat/cpu.h> @@ -33,6 +32,8 @@ #include <plat/clock-clksrc.h> #include <plat/pll.h> +#include "regs-sys.h" + /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call * ext_xtal_mux for want of an actual name from the manual. */ diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index aef303b..0b9c0ba 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -25,10 +25,10 @@ #include <linux/dma-mapping.h> #include <linux/irq.h> #include <linux/gpio.h> +#include <linux/irqchip/arm-vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/hardware/vic.h> #include <asm/system_misc.h> #include <mach/map.h> diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c index acb197c..ead5fab 100644 --- a/arch/arm/mach-s3c64xx/cpuidle.c +++ b/arch/arm/mach-s3c64xx/cpuidle.c @@ -20,8 +20,8 @@ #include <mach/map.h> -#include <mach/regs-sys.h> -#include <mach/regs-syscon-power.h> +#include "regs-sys.h" +#include "regs-syscon-power.h" static int s3c64xx_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h index 4c3c999..4c3c999 100644 --- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ b/arch/arm/mach-s3c64xx/crag6410.h diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index f2a7a17..6af1aa1 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -23,14 +23,13 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/amba/pl080.h> #include <mach/dma.h> #include <mach/map.h> #include <mach/irqs.h> -#include <mach/regs-sys.h> - -#include <asm/hardware/pl080.h> +#include "regs-sys.h" /* dma channel state information */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h index bcce68a..6a11278 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h @@ -15,6 +15,5 @@ #ifndef __ASM_ARCH_REGS_IRQ_H #define __ASM_ARCH_REGS_IRQ_H __FILE__ -#include <asm/hardware/vic.h> #endif /* __ASM_ARCH_6400_REGS_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h deleted file mode 100644 index b91e020..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h +++ /dev/null @@ -1,31 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX system register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_SYS_H -#define __PLAT_REGS_SYS_H __FILE__ - -#define S3C_SYSREG(x) (S3C_VA_SYS + (x)) - -#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100) -#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104) -#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108) - -#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110) - -#define S3C64XX_OTHERS S3C_SYSREG(0x900) - -#define S3C64XX_OTHERS_USBMASK (1 << 16) -#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6) - -#endif /* _PLAT_REGS_SYS_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h index ebe18a9..db9c1b1 100644 --- a/arch/arm/mach-s3c64xx/include/mach/tick.h +++ b/arch/arm/mach-s3c64xx/include/mach/tick.h @@ -15,6 +15,8 @@ #ifndef __ASM_ARCH_TICK_H #define __ASM_ARCH_TICK_H __FILE__ +#include <linux/irqchip/arm-vic.h> + /* note, the timer interrutps turn up in 2 places, the vic and then * the timer block. We take the VIC as the base at the moment. */ diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 99e82ac..728eef3 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -31,7 +31,6 @@ #include <video/platform_lcd.h> #include <video/samsung_fimd.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -50,9 +49,9 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <mach/regs-gpio.h> -#include <mach/regs-modem.h> #include "common.h" +#include "regs-modem.h" /* DM9000 */ #define ANW6410_PA_DM9000 (0x18000000) @@ -230,10 +229,9 @@ MACHINE_START(ANW6410, "A&W6410") .atag_offset = 0x100, .init_irq = s3c6410_init_irq, - .handle_irq = vic_handle_irq, .map_io = anw6410_map_io, .init_machine = anw6410_machine_init, .init_late = s3c64xx_init_late, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 755c0bb..bf3d1c0 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -29,7 +29,7 @@ #include <linux/platform_data/spi-s3c64xx.h> -#include <mach/crag6410.h> +#include "crag6410.h" static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = { .line = S3C64XX_GPC(3), diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index bf6311a..1acf02b 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -42,7 +42,6 @@ #include <sound/wm1250-ev1.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -50,12 +49,7 @@ #include <mach/hardware.h> #include <mach/map.h> -#include <mach/regs-sys.h> #include <mach/regs-gpio.h> -#include <mach/regs-modem.h> -#include <mach/crag6410.h> - -#include <mach/regs-gpio-memport.h> #include <plat/regs-serial.h> #include <plat/fb.h> @@ -72,6 +66,10 @@ #include <plat/pm.h> #include "common.h" +#include "crag6410.h" +#include "regs-gpio-memport.h" +#include "regs-modem.h" +#include "regs-sys.h" /* serial port setup */ @@ -867,10 +865,9 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410") /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, - .handle_irq = vic_handle_irq, .map_io = crag6410_map_io, .init_machine = crag6410_machine_init, .init_late = s3c64xx_init_late, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 2b14489..7212eb9 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -30,7 +30,6 @@ #include <mach/hardware.h> #include <mach/map.h> -#include <asm/hardware/vic.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -273,10 +272,9 @@ MACHINE_START(HMT, "Airgoo-HMT") /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, - .handle_irq = vic_handle_irq, .map_io = hmt_map_io, .init_machine = hmt_machine_init, .init_late = s3c64xx_init_late, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 07c349c..4b41fcd 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -24,15 +24,12 @@ #include <linux/serial_core.h> #include <linux/types.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/regs-modem.h> -#include <mach/regs-srom.h> #include <plat/adc.h> #include <plat/cpu.h> @@ -46,6 +43,8 @@ #include <video/samsung_fimd.h> #include "common.h" +#include "regs-modem.h" +#include "regs-srom.h" #define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) @@ -352,10 +351,9 @@ MACHINE_START(MINI6410, "MINI6410") /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, - .handle_irq = vic_handle_irq, .map_io = mini6410_map_io, .init_machine = mini6410_machine_init, .init_late = s3c64xx_init_late, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index e5f9a79..8d3cedd 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -26,7 +26,6 @@ #include <video/platform_lcd.h> #include <video/samsung_fimd.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -101,10 +100,9 @@ MACHINE_START(NCP, "NCP") /* Maintainer: Samsung Electronics */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, - .handle_irq = vic_handle_irq, .map_io = ncp_map_io, .init_machine = ncp_machine_init, .init_late = s3c64xx_init_late, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 7476f7c..fa12bd2 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -25,15 +25,12 @@ #include <linux/serial_core.h> #include <linux/types.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/regs-modem.h> -#include <mach/regs-srom.h> #include <plat/adc.h> #include <plat/cpu.h> @@ -47,6 +44,8 @@ #include <video/samsung_fimd.h> #include "common.h" +#include "regs-modem.h" +#include "regs-srom.h" #define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) @@ -331,10 +330,9 @@ MACHINE_START(REAL6410, "REAL6410") .atag_offset = 0x100, .init_irq = s3c6410_init_irq, - .handle_irq = vic_handle_irq, .map_io = real6410_map_io, .init_machine = real6410_machine_init, .init_late = s3c64xx_init_late, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index c6d7390..fc3e9b3 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -25,7 +25,6 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/regs-modem.h> #include <plat/clock.h> #include <plat/cpu.h> @@ -41,6 +40,7 @@ #include <video/platform_lcd.h> #include "common.h" +#include "regs-modem.h" #define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index 96d6da2..ca2afcf 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -17,7 +17,6 @@ #include <linux/leds.h> #include <linux/platform_device.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -153,10 +152,9 @@ MACHINE_START(SMARTQ5, "SmartQ 5") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, - .handle_irq = vic_handle_irq, .map_io = smartq_map_io, .init_machine = smartq5_machine_init, .init_late = s3c64xx_init_late, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index 7d1167b..37bb0c6 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -17,7 +17,6 @@ #include <linux/leds.h> #include <linux/platform_device.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -169,10 +168,9 @@ MACHINE_START(SMARTQ7, "SmartQ 7") /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */ .atag_offset = 0x100, .init_irq = s3c6410_init_irq, - .handle_irq = vic_handle_irq, .map_io = smartq_map_io, .init_machine = smartq7_machine_init, .init_late = s3c64xx_init_late, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index a928fae..a392869 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -22,7 +22,6 @@ #include <asm/mach-types.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -90,10 +89,9 @@ MACHINE_START(SMDK6400, "SMDK6400") .atag_offset = 0x100, .init_irq = s3c6400_init_irq, - .handle_irq = vic_handle_irq, .map_io = smdk6400_map_io, .init_machine = smdk6400_machine_init, .init_late = s3c64xx_init_late, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 574a9ee..ba7544e 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -45,7 +45,6 @@ #include <video/platform_lcd.h> #include <video/samsung_fimd.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -57,10 +56,7 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> -#include <mach/regs-modem.h> #include <mach/regs-gpio.h> -#include <mach/regs-sys.h> -#include <mach/regs-srom.h> #include <linux/platform_data/ata-samsung_cf.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/fb.h> @@ -75,6 +71,9 @@ #include <plat/backlight.h> #include "common.h" +#include "regs-modem.h" +#include "regs-srom.h" +#include "regs-sys.h" #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB @@ -700,10 +699,9 @@ MACHINE_START(SMDK6410, "SMDK6410") .atag_offset = 0x100, .init_irq = s3c6410_init_irq, - .handle_irq = vic_handle_irq, .map_io = smdk6410_map_io, .init_machine = smdk6410_machine_init, .init_late = s3c64xx_init_late, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index d2e1a16..6a1f91f 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -26,12 +26,13 @@ #include <plat/pm.h> #include <plat/wakeup-mask.h> -#include <mach/regs-sys.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> -#include <mach/regs-syscon-power.h> -#include <mach/regs-gpio-memport.h> -#include <mach/regs-modem.h> + +#include "regs-gpio-memport.h" +#include "regs-modem.h" +#include "regs-sys.h" +#include "regs-syscon-power.h" struct s3c64xx_pm_domain { char *const name; @@ -296,7 +297,8 @@ static int s3c64xx_cpu_suspend(unsigned long arg) /* we should never get past here */ - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } /* mapping of interrupts to parts of the wakeup mask */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/regs-gpio-memport.h index 82342f6..b927593 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h +++ b/arch/arm/mach-s3c64xx/regs-gpio-memport.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h - * +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -8,8 +7,8 @@ * S3C64XX - GPIO memory port register definitions */ -#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H -#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__ +#ifndef __MACH_S3C64XX_REGS_GPIO_MEMPORT_H +#define __MACH_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__ #define S3C64XX_MEM0CONSTOP S3C64XX_GPIOREG(0x1B0) #define S3C64XX_MEM1CONSTOP S3C64XX_GPIOREG(0x1B4) @@ -21,5 +20,5 @@ #define S3C64XX_MEM0DRVCON S3C64XX_GPIOREG(0x1D0) #define S3C64XX_MEM1DRVCON S3C64XX_GPIOREG(0x1D4) -#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */ +#endif /* __MACH_S3C64XX_REGS_GPIO_MEMPORT_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-modem.h b/arch/arm/mach-s3c64xx/regs-modem.h index 49f7759..073cdd3 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-modem.h +++ b/arch/arm/mach-s3c64xx/regs-modem.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h - * +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -12,10 +11,10 @@ * published by the Free Software Foundation. */ -#ifndef __PLAT_S3C64XX_REGS_MODEM_H -#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__ +#ifndef __MACH_S3C64XX_REGS_MODEM_H +#define __MACH_S3C64XX_REGS_MODEM_H __FILE__ -#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x)) +#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x)) #define S3C64XX_MODEM_INT2AP S3C64XX_MODEMREG(0x0) #define S3C64XX_MODEM_INT2MODEM S3C64XX_MODEMREG(0x4) @@ -28,4 +27,4 @@ #define MIFPCON_INT2M_LEVEL (1 << 4) #define MIFPCON_LCD_BYPASS (1 << 3) -#endif /* __PLAT_S3C64XX_REGS_MODEM_H */ +#endif /* __MACH_S3C64XX_REGS_MODEM_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/regs-srom.h index 756731b..d56f338 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h +++ b/arch/arm/mach-s3c64xx/regs-srom.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h - * +/* * Copyright 2009 Andy Green <andy@warmcat.com> * * S3C64XX SROM definitions @@ -9,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef __PLAT_REGS_SROM_H -#define __PLAT_REGS_SROM_H __FILE__ +#ifndef __MACH_S3C64XX_REGS_SROM_H +#define __MACH_S3C64XX_REGS_SROM_H __FILE__ #define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x)) @@ -29,7 +28,7 @@ #define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0 #define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2 #define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3 -#define S3C64XX_SROM_BW__CS_MASK 0xf +#define S3C64XX_SROM_BW__CS_MASK 0xf #define S3C64XX_SROM_BW__NCS0__SHIFT 0 #define S3C64XX_SROM_BW__NCS1__SHIFT 4 @@ -56,4 +55,4 @@ #define S3C64XX_SROM_BCX__TACS__SHIFT 28 #define S3C64XX_SROM_BCX__TACS__MASK 0xf -#endif /* _PLAT_REGS_SROM_H */ +#endif /* __MACH_S3C64XX_REGS_SROM_H */ diff --git a/arch/arm/mach-s3c64xx/regs-sys.h b/arch/arm/mach-s3c64xx/regs-sys.h new file mode 100644 index 0000000..8c411fb --- /dev/null +++ b/arch/arm/mach-s3c64xx/regs-sys.h @@ -0,0 +1,30 @@ +/* + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX system register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_S3C64XX_REGS_SYS_H +#define __MACH_S3C64XX_REGS_SYS_H __FILE__ + +#define S3C_SYSREG(x) (S3C_VA_SYS + (x)) + +#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100) +#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104) +#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108) + +#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110) + +#define S3C64XX_OTHERS S3C_SYSREG(0x900) + +#define S3C64XX_OTHERS_USBMASK (1 << 16) +#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6) + +#endif /* __MACH_S3C64XX_REGS_SYS_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h b/arch/arm/mach-s3c64xx/regs-syscon-power.h index 270d96a..6e16b34 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h +++ b/arch/arm/mach-s3c64xx/regs-syscon-power.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h - * +/* * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -12,8 +11,8 @@ * published by the Free Software Foundation. */ -#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H -#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__ +#ifndef __MACH_S3C64XX_REGS_SYSCON_POWER_H +#define __MACH_S3C64XX_REGS_SYSCON_POWER_H __FILE__ #define S3C64XX_PWR_CFG S3C_SYSREG(0x804) @@ -113,4 +112,4 @@ #define S3C64XX_INFORM2 S3C_SYSREG(0xA08) #define S3C64XX_INFORM3 S3C_SYSREG(0xA0C) -#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */ +#endif /* __MACH_S3C64XX_REGS_SYSCON_POWER_H */ diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c index f6757e0..c8174d9 100644 --- a/arch/arm/mach-s3c64xx/setup-usb-phy.c +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -15,11 +15,12 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <mach/map.h> -#include <mach/regs-sys.h> #include <plat/cpu.h> #include <plat/regs-usb-hsotg-phy.h> #include <plat/usb-phy.h> +#include "regs-sys.h" + static int s3c_usb_otgphy_init(struct platform_device *pdev) { struct clk *xusbxti; diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index 5112371..35378152 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -23,7 +23,6 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/s5p64x0-clock.h> #include <plat/cpu-freq.h> #include <plat/clock.h> @@ -32,6 +31,7 @@ #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> +#include "clock.h" #include "common.h" static u32 epll_div[][5] = { diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index 154dea7..af384dd 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -23,7 +23,6 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/s5p64x0-clock.h> #include <plat/cpu-freq.h> #include <plat/clock.h> @@ -32,6 +31,7 @@ #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> +#include "clock.h" #include "common.h" static struct clksrc_clk clk_mout_dpll = { diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/clock.h index 0ef47d1..28b8e3c 100644 --- a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h +++ b/arch/arm/mach-s5p64x0/clock.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h - * +/* * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com * @@ -10,8 +9,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H __FILE__ +#ifndef __MACH_S5P64X0_CLOCK_H +#define __MACH_S5P64X0_CLOCK_H __FILE__ #include <linux/clk.h> @@ -36,4 +35,4 @@ extern int s5p64x0_mem_ctrl(struct clk *clk, int enable); extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable); -#endif /* __ASM_ARCH_CLOCK_H */ +#endif /* __MACH_S5P64X0_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c deleted file mode 100644 index 700dac6..0000000 --- a/arch/arm/mach-s5p64x0/gpiolib.c +++ /dev/null @@ -1,508 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/gpiolib.c - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P64X0 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <mach/regs-gpio.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -/* - * S5P6440 GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 6 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * F 2 2Bit Yes 4 [1] - * G 7 4Bit Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * N 16 2Bit No IRQ_EINT - * P 8 2Bit Yes 8 - * R 15 4Bit[2] Yes 8 - * - * S5P6450 GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 6 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * D 8 4Bit Yes None - * F 2 2Bit Yes None - * G 14 4Bit[2] Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * K 5 4Bit Yes None - * N 16 2Bit No IRQ_EINT - * P 11 2Bit Yes 8 - * Q 14 2Bit Yes None - * R 15 4Bit[2] Yes None - * S 8 2Bit Yes None - * - * [1] BANKF pins 14,15 do not form part of the external interrupt sources - * [2] BANK has two control registers, GPxCON0 and GPxCON1 - */ - -static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long flags; - - switch (offset) { - case 6: - offset += 1; - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - regcon -= 4; - break; - default: - offset -= 7; - break; - } - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - s3c_gpio_unlock(ourchip, flags); - - return 0; -} - -static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned long flags; - unsigned con_offset = offset; - - switch (con_offset) { - case 6: - con_offset += 1; - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - regcon -= 4; - break; - default: - con_offset -= 7; - break; - } - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - s3c_gpio_unlock(ourchip, flags); - - return 0; -} - -int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift; - u32 con; - - switch (off) { - case 0: - case 1: - case 2: - case 3: - case 4: - case 5: - shift = (off & 7) * 4; - reg -= 4; - break; - case 6: - shift = ((off + 1) & 7) * 4; - reg -= 4; - default: - shift = ((off + 1) & 7) * 4; - break; - } - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0xf << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = { - { - .cfg_eint = 0, - }, { - .cfg_eint = 7, - }, { - .cfg_eint = 3, - .set_config = s5p64x0_gpio_setcfg_4bit_rbank, - }, { - .cfg_eint = 0, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, { - .cfg_eint = 2, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, { - .cfg_eint = 3, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { - { - .base = S5P64X0_GPA_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPA(0), - .ngpio = S5P6440_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S5P64X0_GPB_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPB(0), - .ngpio = S5P6440_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S5P64X0_GPC_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPC(0), - .ngpio = S5P6440_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S5P64X0_GPG_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPG(0), - .ngpio = S5P6440_GPIO_G_NR, - .label = "GPG", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { - { - .base = S5P64X0_GPH_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6440_GPH(0), - .ngpio = S5P6440_GPIO_H_NR, - .label = "GPH", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = { - { - .base = S5P64X0_GPR_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[2], - .chip = { - .base = S5P6440_GPR(0), - .ngpio = S5P6440_GPIO_R_NR, - .label = "GPR", - }, - }, -}; - -static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { - { - .base = S5P64X0_GPF_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6440_GPF(0), - .ngpio = S5P6440_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S5P64X0_GPI_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6440_GPI(0), - .ngpio = S5P6440_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S5P64X0_GPJ_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6440_GPJ(0), - .ngpio = S5P6440_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S5P64X0_GPN_BASE, - .config = &s5p64x0_gpio_cfgs[4], - .chip = { - .base = S5P6440_GPN(0), - .ngpio = S5P6440_GPIO_N_NR, - .label = "GPN", - }, - }, { - .base = S5P64X0_GPP_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6440_GPP(0), - .ngpio = S5P6440_GPIO_P_NR, - .label = "GPP", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_4bit[] = { - { - .base = S5P64X0_GPA_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPA(0), - .ngpio = S5P6450_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S5P64X0_GPB_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPB(0), - .ngpio = S5P6450_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S5P64X0_GPC_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPC(0), - .ngpio = S5P6450_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S5P6450_GPD_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPD(0), - .ngpio = S5P6450_GPIO_D_NR, - .label = "GPD", - }, - }, { - .base = S5P6450_GPK_BASE, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPK(0), - .ngpio = S5P6450_GPIO_K_NR, - .label = "GPK", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = { - { - .base = S5P64X0_GPG_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPG(0), - .ngpio = S5P6450_GPIO_G_NR, - .label = "GPG", - }, - }, { - .base = S5P64X0_GPH_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[1], - .chip = { - .base = S5P6450_GPH(0), - .ngpio = S5P6450_GPIO_H_NR, - .label = "GPH", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = { - { - .base = S5P64X0_GPR_BASE + 0x4, - .config = &s5p64x0_gpio_cfgs[2], - .chip = { - .base = S5P6450_GPR(0), - .ngpio = S5P6450_GPIO_R_NR, - .label = "GPR", - }, - }, -}; - -static struct s3c_gpio_chip s5p6450_gpio_2bit[] = { - { - .base = S5P64X0_GPF_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6450_GPF(0), - .ngpio = S5P6450_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S5P64X0_GPI_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6450_GPI(0), - .ngpio = S5P6450_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S5P64X0_GPJ_BASE, - .config = &s5p64x0_gpio_cfgs[3], - .chip = { - .base = S5P6450_GPJ(0), - .ngpio = S5P6450_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S5P64X0_GPN_BASE, - .config = &s5p64x0_gpio_cfgs[4], - .chip = { - .base = S5P6450_GPN(0), - .ngpio = S5P6450_GPIO_N_NR, - .label = "GPN", - }, - }, { - .base = S5P64X0_GPP_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6450_GPP(0), - .ngpio = S5P6450_GPIO_P_NR, - .label = "GPP", - }, - }, { - .base = S5P6450_GPQ_BASE, - .config = &s5p64x0_gpio_cfgs[4], - .chip = { - .base = S5P6450_GPQ(0), - .ngpio = S5P6450_GPIO_Q_NR, - .label = "GPQ", - }, - }, { - .base = S5P6450_GPS_BASE, - .config = &s5p64x0_gpio_cfgs[5], - .chip = { - .base = S5P6450_GPS(0), - .ngpio = S5P6450_GPIO_S_NR, - .label = "GPS", - }, - }, -}; - -void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chipcfg++) { - if (!chipcfg->set_config) - chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; - if (!chipcfg->get_config) - chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; - if (!chipcfg->set_pull) - chipcfg->set_pull = s3c_gpio_setpull_updown; - if (!chipcfg->get_pull) - chipcfg->get_pull = s3c_gpio_getpull_updown; - } -} - -static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input; - chip->chip.direction_output = - s5p64x0_gpiolib_rbank_4bit2_output; - s3c_gpiolib_add(chip); - } -} - -static int __init s5p64x0_gpiolib_init(void) -{ - s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, - ARRAY_SIZE(s5p64x0_gpio_cfgs)); - - if (soc_is_s5p6450()) { - samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit, - ARRAY_SIZE(s5p6450_gpio_2bit)); - - samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit, - ARRAY_SIZE(s5p6450_gpio_4bit)); - - samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2, - ARRAY_SIZE(s5p6450_gpio_4bit2)); - - s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2, - ARRAY_SIZE(s5p6450_gpio_rbank_4bit2)); - } else { - samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit, - ARRAY_SIZE(s5p6440_gpio_2bit)); - - samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, - ARRAY_SIZE(s5p6440_gpio_4bit)); - - samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, - ARRAY_SIZE(s5p6440_gpio_4bit2)); - - s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2, - ARRAY_SIZE(s5p6440_gpio_rbank_4bit2)); - } - - return 0; -} -core_initcall(s5p64x0_gpiolib_init); diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/i2c.h index 887d252..1e5bb4e 100644 --- a/arch/arm/mach-s5p64x0/include/mach/i2c.h +++ b/arch/arm/mach-s5p64x0/i2c.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h - * +/* * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com * diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h index 4aaebda..d60397d 100644 --- a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h @@ -13,7 +13,6 @@ #ifndef __ASM_ARCH_REGS_IRQ_H #define __ASM_ARCH_REGS_IRQ_H __FILE__ -#include <asm/hardware/vic.h> #include <mach/map.h> #endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h deleted file mode 100644 index 00aa7f1..0000000 --- a/arch/arm/mach-s5p64x0/include/mach/tick.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S5P64X0 - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h index 1608faf..19e0d64 100644 --- a/arch/arm/mach-s5p64x0/include/mach/uncompress.h +++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h @@ -116,33 +116,6 @@ static inline void flush(void) *((volatile unsigned int __force *)(ad)) = (d); \ } while (0) -/* - * CONFIG_S3C_BOOT_WATCHDOG - * - * Simple boot-time watchdog setup, to reboot the system if there is - * any problem with the boot process - */ - -#ifdef CONFIG_S3C_BOOT_WATCHDOG - -#define WDOG_COUNT (0xff00) - -static inline void arch_decomp_wdog(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); -} - -static void arch_decomp_wdog_start(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTDAT); - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); -} - -#else -#define arch_decomp_wdog_start() -#define arch_decomp_wdog() -#endif #ifdef CONFIG_S3C_BOOT_ERROR_RESET @@ -192,7 +165,6 @@ static void arch_decomp_setup(void) */ arch_detect_cpu(); - arch_decomp_wdog_start(); /* * Enable the UART FIFOs if they where not enabled and our diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 1af8235..e23723a 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -29,7 +29,6 @@ #include <video/platform_lcd.h> #include <video/samsung_fimd.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/irq.h> @@ -38,7 +37,6 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/i2c.h> #include <mach/regs-gpio.h> #include <plat/regs-serial.h> @@ -56,6 +54,7 @@ #include <plat/sdhci.h> #include "common.h" +#include "i2c.h" #define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -272,9 +271,8 @@ MACHINE_START(SMDK6440, "SMDK6440") .atag_offset = 0x100, .init_irq = s5p6440_init_irq, - .handle_irq = vic_handle_irq, .map_io = smdk6440_map_io, .init_machine = smdk6440_machine_init, - .timer = &s5p_timer, + .init_time = s5p_timer_init, .restart = s5p64x0_restart, MACHINE_END diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index 62526cc..ca10963 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -29,7 +29,6 @@ #include <video/platform_lcd.h> #include <video/samsung_fimd.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/irq.h> @@ -38,7 +37,6 @@ #include <mach/hardware.h> #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/i2c.h> #include <mach/regs-gpio.h> #include <plat/regs-serial.h> @@ -56,6 +54,7 @@ #include <plat/sdhci.h> #include "common.h" +#include "i2c.h" #define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -291,9 +290,8 @@ MACHINE_START(SMDK6450, "SMDK6450") .atag_offset = 0x100, .init_irq = s5p6450_init_irq, - .handle_irq = vic_handle_irq, .map_io = smdk6450_map_io, .init_machine = smdk6450_machine_init, - .timer = &s5p_timer, + .init_time = s5p_timer_init, .restart = s5p64x0_restart, MACHINE_END diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c index 9cba18b..97c2a08a 100644 --- a/arch/arm/mach-s5p64x0/pm.c +++ b/arch/arm/mach-s5p64x0/pm.c @@ -103,8 +103,8 @@ static int s5p64x0_cpu_suspend(unsigned long arg) "mcr p15, 0, %0, c7, c10, 4\n\t" "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp)); - /* we should never get past here */ - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } /* mapping of interrupts to parts of the wakeup mask */ diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c index a32edc5..569b76a 100644 --- a/arch/arm/mach-s5p64x0/setup-i2c0.c +++ b/arch/arm/mach-s5p64x0/setup-i2c0.c @@ -21,7 +21,7 @@ struct platform_device; /* don't need the contents */ #include <plat/gpio-cfg.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <mach/i2c.h> +#include "i2c.h" void s5p6440_i2c0_cfg_gpio(struct platform_device *dev) { diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c index ca2c5c7..867374e 100644 --- a/arch/arm/mach-s5p64x0/setup-i2c1.c +++ b/arch/arm/mach-s5p64x0/setup-i2c1.c @@ -21,7 +21,7 @@ struct platform_device; /* don't need the contents */ #include <plat/gpio-cfg.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <mach/i2c.h> +#include "i2c.h" void s5p6440_i2c1_cfg_gpio(struct platform_device *dev) { diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h index 4d9036d..7616278 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h @@ -14,6 +14,5 @@ #define __ASM_ARCH_REGS_IRQ_H __FILE__ #include <mach/map.h> -#include <asm/hardware/vic.h> #endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h index 20f6873..0af8e41 100644 --- a/arch/arm/mach-s5pc100/include/mach/tick.h +++ b/arch/arm/mach-s5pc100/include/mach/tick.h @@ -15,6 +15,8 @@ #ifndef __ASM_ARCH_TICK_H #define __ASM_ARCH_TICK_H __FILE__ +#include <linux/irqchip/arm-vic.h> + /* note, the timer interrutps turn up in 2 places, the vic and then * the timer block. We take the VIC as the base at the moment. */ diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 9abe95e..185a195 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -25,7 +25,6 @@ #include <linux/input.h> #include <linux/pwm_backlight.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -254,9 +253,8 @@ MACHINE_START(SMDKC100, "SMDKC100") /* Maintainer: Byungho Min <bhmin@samsung.com> */ .atag_offset = 0x100, .init_irq = s5pc100_init_irq, - .handle_irq = vic_handle_irq, .map_io = smdkc100_map_io, .init_machine = smdkc100_machine_init, - .timer = &s3c24xx_timer, + .init_time = s3c24xx_timer_init, .restart = s5pc100_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index addfb16..2d67361 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -18,7 +18,8 @@ #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> -#include <mach/regs-audss.h> + +#define S5PV210_AUDSS_INT_MEM (0xC0000000) static int s5pv210_cfg_i2s(struct platform_device *pdev) { diff --git a/arch/arm/mach-s5pv210/include/mach/regs-audss.h b/arch/arm/mach-s5pv210/include/mach/regs-audss.h deleted file mode 100644 index eacc1f7..0000000 --- a/arch/arm/mach-s5pv210/include/mach/regs-audss.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s5pv210/include/mach/regs-audss.h - * - * Copyright (c) 2011 Samsung Electronics - * http://www.samsung.com - * - * S5PV210 Audio SubSystem clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_AUDSS_H -#define __PLAT_REGS_AUDSS_H __FILE__ - -#define S5PV210_AUDSS_INT_MEM (0xC0000000) - -#endif /* _PLAT_REGS_AUDSS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h index 5c3b104..d8bc1e6 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-irq.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h @@ -13,7 +13,6 @@ #ifndef __ASM_ARCH_REGS_IRQ_H #define __ASM_ARCH_REGS_IRQ_H __FILE__ -#include <asm/hardware/vic.h> #include <mach/map.h> #endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h deleted file mode 100644 index cccb1ed..0000000 --- a/arch/arm/mach-s5pv210/include/mach/regs-sys.h +++ /dev/null @@ -1,15 +0,0 @@ -/* arch/arm/mach-s5pv210/include/mach/regs-sys.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - System registers definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) -#define S5PV210_USB_PHY0_EN (1 << 0) -#define S5PV210_USB_PHY1_EN (1 << 1) diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h deleted file mode 100644 index 7993b36..0000000 --- a/arch/arm/mach-s5pv210/include/mach/tick.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/tick.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/tick.h - * - * S5PV210 - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h index 08ff2fd..ef977ea 100644 --- a/arch/arm/mach-s5pv210/include/mach/uncompress.h +++ b/arch/arm/mach-s5pv210/include/mach/uncompress.h @@ -19,6 +19,8 @@ static void arch_detect_cpu(void) { /* we do not need to do any cpu detection here at the moment. */ + fifo_mask = S5PV210_UFSTAT_TXMASK; + fifo_max = 63 << S5PV210_UFSTAT_TXSHIFT; } #endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index ee9fa5c..11900a8 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -22,7 +22,6 @@ #include <linux/input.h> #include <linux/gpio.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> @@ -685,9 +684,8 @@ MACHINE_START(AQUILA, "Aquila") Kyungmin Park <kyungmin.park@samsung.com> */ .atag_offset = 0x100, .init_irq = s5pv210_init_irq, - .handle_irq = vic_handle_irq, .map_io = aquila_map_io, .init_machine = aquila_machine_init, - .timer = &s5p_timer, + .init_time = s5p_timer_init, .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index c72b310..3a38f7b 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -29,7 +29,6 @@ #include <linux/interrupt.h> #include <linux/platform_data/s3c-hsotg.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> @@ -841,12 +840,12 @@ static struct i2c_board_info noon010pc30_board_info = { .platform_data = &noon010pc30_pldata, }; -static struct s5p_fimc_isp_info goni_camera_sensors[] = { +static struct fimc_source_info goni_camera_sensors[] = { { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, - .bus_type = FIMC_ITU_601, + .bus_type = FIMC_BUS_TYPE_ITU_601, .board_info = &noon010pc30_board_info, .i2c_bus_num = 0, .clk_frequency = 16000000UL, @@ -854,7 +853,7 @@ static struct s5p_fimc_isp_info goni_camera_sensors[] = { }; static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { - .isp_info = goni_camera_sensors, + .source_info = goni_camera_sensors, .num_clients = ARRAY_SIZE(goni_camera_sensors), }; @@ -972,10 +971,9 @@ MACHINE_START(GONI, "GONI") /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */ .atag_offset = 0x100, .init_irq = s5pv210_init_irq, - .handle_irq = vic_handle_irq, .map_io = goni_map_io, .init_machine = goni_machine_init, - .timer = &s5p_timer, + .init_time = s5p_timer_init, .reserve = &goni_reserve, .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index f1f3bd3..28bd024 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -15,7 +15,6 @@ #include <linux/i2c.h> #include <linux/device.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> @@ -152,10 +151,9 @@ MACHINE_START(SMDKC110, "SMDKC110") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .atag_offset = 0x100, .init_irq = s5pv210_init_irq, - .handle_irq = vic_handle_irq, .map_io = smdkc110_map_io, .init_machine = smdkc110_machine_init, - .timer = &s5p_timer, + .init_time = s5p_timer_init, .restart = s5pv210_restart, .reserve = &smdkc110_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 6bc8404..3c73f36 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -21,7 +21,6 @@ #include <linux/pwm_backlight.h> #include <linux/platform_data/s3c-hsotg.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> @@ -328,10 +327,9 @@ MACHINE_START(SMDKV210, "SMDKV210") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .atag_offset = 0x100, .init_irq = s5pv210_init_irq, - .handle_irq = vic_handle_irq, .map_io = smdkv210_map_io, .init_machine = smdkv210_machine_init, - .timer = &s5p_timer, + .init_time = s5p_timer_init, .restart = s5pv210_restart, .reserve = &smdkv210_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 18785cb..2d4c553 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -14,7 +14,6 @@ #include <linux/init.h> #include <linux/serial_core.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> @@ -129,9 +128,8 @@ MACHINE_START(TORBRECK, "TORBRECK") /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ .atag_offset = 0x100, .init_irq = s5pv210_init_irq, - .handle_irq = vic_handle_irq, .map_io = torbreck_map_io, .init_machine = torbreck_machine_init, - .timer = &s5p_timer, + .init_time = s5p_timer_init, .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 736bfb1..2b68a67 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -104,8 +104,8 @@ static int s5pv210_cpu_suspend(unsigned long arg) "mcr p15, 0, %0, c7, c10, 4\n\t" "wfi" : : "r" (tmp)); - /* we should never get past here */ - panic("sleep resumed to originator?"); + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ } static void s5pv210_pm_prepare(void) diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c index be39cf4..356a090 100644 --- a/arch/arm/mach-s5pv210/setup-usb-phy.c +++ b/arch/arm/mach-s5pv210/setup-usb-phy.c @@ -12,12 +12,17 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> + #include <mach/map.h> -#include <mach/regs-sys.h> + #include <plat/cpu.h> #include <plat/regs-usb-hsotg-phy.h> #include <plat/usb-phy.h> +#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) +#define S5PV210_USB_PHY0_EN (1 << 0) +#define S5PV210_USB_PHY1_EN (1 << 1) + static int s5pv210_usb_otgphy_init(struct platform_device *pdev) { struct clk *xusbxti; diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 9a23739..e838ba2 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -16,6 +16,7 @@ #include <linux/ioport.h> #include <linux/platform_data/sa11x0-serial.h> #include <linux/serial_core.h> +#include <linux/platform_device.h> #include <linux/mfd/ucb1x00.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -621,7 +622,7 @@ MACHINE_START(ASSABET, "Intel-Assabet") .map_io = assabet_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .init_machine = assabet_init, .init_late = sa11x0_init_late, #ifdef CONFIG_SA1111 diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index b2dadf3..63361b6 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -336,7 +336,7 @@ MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .init_late = sa11x0_init_late, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, #ifdef CONFIG_SA1111 .dma_zone_size = SZ_1M, #endif diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 304bca4..2d25ece 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -174,7 +174,7 @@ MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") .map_io = cerf_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = cerf_init_irq, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .init_machine = cerf_init, .init_late = sa11x0_init_late, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 45f424f..612a456 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -399,7 +399,7 @@ MACHINE_START(COLLIE, "Sharp-Collie") .map_io = collie_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .init_machine = collie_init, .init_late = sa11x0_init_late, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index a5b7c13..2abc6a1 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -4,9 +4,7 @@ * Author: Nicolas Pitre */ -struct sys_timer; - -extern struct sys_timer sa1100_timer; +extern void sa1100_timer_init(void); extern void __init sa1100_map_io(void); extern void __init sa1100_init_irq(void); extern void __init sa1100_init_gpio(void); diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index e1571ea..b8f2b15 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -108,7 +108,7 @@ MACHINE_START(H3100, "Compaq iPAQ H3100") .map_io = h3100_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .init_machine = h3100_mach_init, .init_late = sa11x0_init_late, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index ba7a290..b8dc5bd 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -158,7 +158,7 @@ MACHINE_START(H3600, "Compaq iPAQ H3600") .map_io = h3600_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .init_machine = h3600_mach_init, .init_late = sa11x0_init_late, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index d005939..643d5f2 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -229,7 +229,7 @@ MACHINE_START(HACKKIT, "HackKit Cpu Board") .map_io = hackkit_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .init_machine = hackkit_init, .init_late = sa11x0_init_late, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h index 5cf71da..73093dc 100644 --- a/arch/arm/mach-sa1100/include/mach/uncompress.h +++ b/arch/arm/mach-sa1100/include/mach/uncompress.h @@ -49,4 +49,3 @@ static inline void flush(void) * Nothing to do for these */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 35cfc42..c0b1f5b 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -346,7 +346,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720") .map_io = jornada720_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .init_machine = jornada720_mach_init, .init_late = sa11x0_init_late, #ifdef CONFIG_SA1111 diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index f69f78f..51b0eb5 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -24,9 +24,6 @@ #include "generic.h" - -#warning "include/asm/arch-sa1100/ide.h needs fixing for lart" - static struct mcp_plat_data lart_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, @@ -174,6 +171,6 @@ MACHINE_START(LART, "LART") .init_irq = sa1100_init_irq, .init_machine = lart_init, .init_late = sa11x0_init_late, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c index 102e08f..f1cb378 100644 --- a/arch/arm/mach-sa1100/nanoengine.c +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -110,7 +110,7 @@ MACHINE_START(NANOENGINE, "BSE nanoEngine") .map_io = nanoengine_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .init_machine = nanoengine_init, .init_late = sa11x0_init_late, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index c51bb63..0912618 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -133,7 +133,7 @@ MACHINE_START(PLEB, "PLEB") .map_io = pleb_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .init_machine = pleb_init, .init_late = sa11x0_init_late, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 6460d25..c8866bc 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -102,7 +102,7 @@ MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") .map_io = shannon_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .init_machine = shannon_init, .init_late = sa11x0_init_late, .restart = sa11x0_restart, diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 6d65f65..bcbc945 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -396,6 +396,6 @@ MACHINE_START(SIMPAD, "Simpad") .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .init_late = sa11x0_init_late, - .timer = &sa1100_timer, + .init_time = sa1100_timer_init, .restart = sa11x0_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 80702c9..a59a13a 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -69,46 +69,10 @@ sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c) } } -static struct clock_event_device ckevt_sa1100_osmr0 = { - .name = "osmr0", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = sa1100_osmr0_set_next_event, - .set_mode = sa1100_osmr0_set_mode, -}; - -static struct irqaction sa1100_timer_irq = { - .name = "ost0", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = sa1100_ost0_interrupt, - .dev_id = &ckevt_sa1100_osmr0, -}; - -static void __init sa1100_timer_init(void) -{ - writel_relaxed(0, OIER); - writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); - - setup_sched_clock(sa1100_read_sched_clock, 32, 3686400); - - clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4); - ckevt_sa1100_osmr0.max_delta_ns = - clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0); - ckevt_sa1100_osmr0.min_delta_ns = - clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1; - ckevt_sa1100_osmr0.cpumask = cpumask_of(0); - - setup_irq(IRQ_OST0, &sa1100_timer_irq); - - clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32, - clocksource_mmio_readl_up); - clockevents_register_device(&ckevt_sa1100_osmr0); -} - #ifdef CONFIG_PM unsigned long osmr[4], oier; -static void sa1100_timer_suspend(void) +static void sa1100_timer_suspend(struct clock_event_device *cedev) { osmr[0] = readl_relaxed(OSMR0); osmr[1] = readl_relaxed(OSMR1); @@ -117,7 +81,7 @@ static void sa1100_timer_suspend(void) oier = readl_relaxed(OIER); } -static void sa1100_timer_resume(void) +static void sa1100_timer_resume(struct clock_event_device *cedev) { writel_relaxed(0x0f, OSSR); writel_relaxed(osmr[0], OSMR0); @@ -136,8 +100,36 @@ static void sa1100_timer_resume(void) #define sa1100_timer_resume NULL #endif -struct sys_timer sa1100_timer = { - .init = sa1100_timer_init, +static struct clock_event_device ckevt_sa1100_osmr0 = { + .name = "osmr0", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_next_event = sa1100_osmr0_set_next_event, + .set_mode = sa1100_osmr0_set_mode, .suspend = sa1100_timer_suspend, .resume = sa1100_timer_resume, }; + +static struct irqaction sa1100_timer_irq = { + .name = "ost0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = sa1100_ost0_interrupt, + .dev_id = &ckevt_sa1100_osmr0, +}; + +void __init sa1100_timer_init(void) +{ + writel_relaxed(0, OIER); + writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); + + setup_sched_clock(sa1100_read_sched_clock, 32, 3686400); + + ckevt_sa1100_osmr0.cpumask = cpumask_of(0); + + setup_irq(IRQ_OST0, &sa1100_timer_irq); + + clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32, + clocksource_mmio_readl_up); + clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400, + MIN_OSCR_DELTA * 2, 0x7fffffff); +} diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index 9ad2e97..b63dec8 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -128,10 +128,6 @@ static void __init shark_timer_init(void) setup_irq(IRQ_TIMER, &shark_timer_irq); } -static struct sys_timer shark_timer = { - .init = shark_timer_init, -}; - static void shark_init_early(void) { disable_hlt(); @@ -142,7 +138,7 @@ MACHINE_START(SHARK, "Shark") .atag_offset = 0x3000, .init_early = shark_init_early, .init_irq = shark_init_irq, - .timer = &shark_timer, + .init_time = shark_timer_init, .dma_zone_size = SZ_4M, .restart = shark_restart, MACHINE_END diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h index 22ccab4..a168435 100644 --- a/arch/arm/mach-shark/include/mach/uncompress.h +++ b/arch/arm/mach-shark/include/mach/uncompress.h @@ -48,4 +48,3 @@ static void putr() * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 0b71479..e1fac57 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -15,17 +15,10 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o # SMP objects smp-y := platsmp.o headsmp.o smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o -smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o +smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-sh73a0.o smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o -# Pinmux setup -pfc-y := -pfc-$(CONFIG_ARCH_SH7372) += pfc-sh7372.o -pfc-$(CONFIG_ARCH_SH73A0) += pfc-sh73a0.o -pfc-$(CONFIG_ARCH_R8A7740) += pfc-r8a7740.o -pfc-$(CONFIG_ARCH_R8A7779) += pfc-r8a7779.o - # IRQ objects obj-$(CONFIG_ARCH_SH7372) += entry-intc.o obj-$(CONFIG_ARCH_R8A7740) += entry-intc.o @@ -37,6 +30,7 @@ obj-$(CONFIG_ARCH_SHMOBILE) += pm-rmobile.o obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o +obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o # Board objects obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o @@ -51,4 +45,3 @@ obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o # Framework support obj-$(CONFIG_SMP) += $(smp-y) -obj-$(CONFIG_GENERIC_GPIO) += $(pfc-y) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 032d108..8ff53a1 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -40,6 +40,7 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> +#include <linux/irqchip/arm-gic.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> @@ -49,7 +50,6 @@ #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/traps.h> @@ -479,11 +479,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) static int power_gpio = -EINVAL; if (power_gpio < 0) { - int ret = gpio_request(GPIO_PORT114, "sdhi1_power"); - if (!ret) { + int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW, + "sdhi1_power"); + if (!ret) power_gpio = GPIO_PORT114; - gpio_direction_output(power_gpio, 0); - } } /* @@ -604,14 +603,11 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_MMCD0_5_PU, NULL); gpio_request(GPIO_FN_MMCD0_6_PU, NULL); gpio_request(GPIO_FN_MMCD0_7_PU, NULL); - gpio_request(GPIO_PORT208, NULL); /* Reset */ - gpio_direction_output(GPIO_PORT208, 1); + gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ /* enable SMSC911X */ - gpio_request(GPIO_PORT144, NULL); /* PINTA2 */ - gpio_direction_input(GPIO_PORT144); - gpio_request(GPIO_PORT145, NULL); /* RESET */ - gpio_direction_output(GPIO_PORT145, 1); + gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */ + gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ /* FSI A */ gpio_request(GPIO_FN_FSIACK, NULL); @@ -626,15 +622,13 @@ static void __init ag5evm_init(void) gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL); /* LCD panel */ - gpio_request(GPIO_PORT217, NULL); /* RESET */ - gpio_direction_output(GPIO_PORT217, 0); + gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ mdelay(1); gpio_set_value(GPIO_PORT217, 1); mdelay(100); /* LCD backlight controller */ - gpio_request(GPIO_PORT235, NULL); /* RESET */ - gpio_direction_output(GPIO_PORT235, 0); + gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ lcd_backlight_set_brightness(0); /* enable SDHI0 on CN15 [SD I/F] */ @@ -668,8 +662,7 @@ MACHINE_START(AG5EVM, "ag5evm") .init_early = sh73a0_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, - .handle_irq = gic_handle_irq, .init_machine = ag5evm_init, .init_late = shmobile_init_late, - .timer = &shmobile_timer, + .init_time = sh73a0_earlytimer_init, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 99ef190..38f1259 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -143,6 +143,10 @@ * * SW41 : ON : SH-Mobile AP4 Audio Mode * : OFF : Bluetooth Audio Mode + * + * it needs amixer settings for playing + * + * amixer set "Headphone Enable" on */ /* @@ -657,14 +661,8 @@ static struct platform_device lcdc_device = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) static struct sh_fsi_platform_info fsi_info = { - .port_a = { - .flags = SH_FSI_BRS_INV, - }, .port_b = { - .flags = SH_FSI_BRS_INV | - SH_FSI_BRM_INV | - SH_FSI_LRS_INV | - SH_FSI_CLK_CPG | + .flags = SH_FSI_CLK_CPG | SH_FSI_FMT_SPDIF, }, }; @@ -692,21 +690,21 @@ static struct platform_device fsi_device = { }, }; -static struct asoc_simple_dai_init_info fsi2_ak4643_init_info = { - .fmt = SND_SOC_DAIFMT_LEFT_J, - .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, - .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, - .sysclk = 11289600, -}; - static struct asoc_simple_card_info fsi2_ak4643_info = { .name = "AK4643", .card = "FSI2A-AK4643", - .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0013", .platform = "sh_fsi2", - .codec_dai = "ak4642-hifi", - .init = &fsi2_ak4643_init_info, + .daifmt = SND_SOC_DAIFMT_LEFT_J, + .cpu_dai = { + .name = "fsia-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS, + }, + .codec_dai = { + .name = "ak4642-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + .sysclk = 11289600, + }, }; static struct platform_device fsi_ak4643_device = { @@ -815,18 +813,18 @@ static struct platform_device lcdc1_device = { }, }; -static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = { - .cpu_daifmt = SND_SOC_DAIFMT_CBM_CFM, -}; - static struct asoc_simple_card_info fsi2_hdmi_info = { .name = "HDMI", .card = "FSI2B-HDMI", - .cpu_dai = "fsib-dai", .codec = "sh-mobile-hdmi", .platform = "sh_fsi2", - .codec_dai = "sh_mobile_hdmi-hifi", - .init = &fsi2_hdmi_init_info, + .cpu_dai = { + .name = "fsib-dai", + .fmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF, + }, + .codec_dai = { + .name = "sh_mobile_hdmi-hifi", + }, }; static struct platform_device fsi_hdmi_device = { @@ -1042,9 +1040,7 @@ static int ts_get_pendown_state(void) gpio_free(GPIO_TSC_IRQ); - gpio_request(GPIO_TSC_PORT, NULL); - - gpio_direction_input(GPIO_TSC_PORT); + gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL); val = gpio_get_value(GPIO_TSC_PORT); @@ -1125,18 +1121,10 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_IRQ6_39, NULL); /* enable Debug switch (S6) */ - gpio_request(GPIO_PORT32, NULL); - gpio_request(GPIO_PORT33, NULL); - gpio_request(GPIO_PORT34, NULL); - gpio_request(GPIO_PORT35, NULL); - gpio_direction_input(GPIO_PORT32); - gpio_direction_input(GPIO_PORT33); - gpio_direction_input(GPIO_PORT34); - gpio_direction_input(GPIO_PORT35); - gpio_export(GPIO_PORT32, 0); - gpio_export(GPIO_PORT33, 0); - gpio_export(GPIO_PORT34, 0); - gpio_export(GPIO_PORT35, 0); + gpio_request_one(GPIO_PORT32, GPIOF_IN | GPIOF_EXPORT, NULL); + gpio_request_one(GPIO_PORT33, GPIOF_IN | GPIOF_EXPORT, NULL); + gpio_request_one(GPIO_PORT34, GPIOF_IN | GPIOF_EXPORT, NULL); + gpio_request_one(GPIO_PORT35, GPIOF_IN | GPIOF_EXPORT, NULL); /* SDHI0 */ gpio_request(GPIO_FN_SDHICD0, NULL); @@ -1184,8 +1172,7 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); gpio_request(GPIO_FN_FSIAOSLD, NULL); - gpio_request(GPIO_PORT161, NULL); - gpio_direction_output(GPIO_PORT161, 0); /* slave */ + gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ gpio_request(GPIO_PORT9, NULL); gpio_request(GPIO_PORT10, NULL); @@ -1193,8 +1180,7 @@ static void __init ap4evb_init(void) gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */ /* card detect pin for MMC slot (CN7) */ - gpio_request(GPIO_PORT41, NULL); - gpio_direction_input(GPIO_PORT41); + gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL); /* setup FSI2 port B (HDMI) */ gpio_request(GPIO_FN_FSIBCK, NULL); @@ -1282,11 +1268,8 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_LCDDISP, NULL); gpio_request(GPIO_FN_LCDDCK, NULL); - gpio_request(GPIO_PORT189, NULL); /* backlight */ - gpio_direction_output(GPIO_PORT189, 1); - - gpio_request(GPIO_PORT151, NULL); /* LCDDON */ - gpio_direction_output(GPIO_PORT151, 1); + gpio_request_one(GPIO_PORT189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */ + gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ lcdc_info.clock_source = LCDC_CLK_BUS; lcdc_info.ch[0].interface_type = RGB18; @@ -1350,5 +1333,5 @@ MACHINE_START(AP4EVB, "ap4evb") .handle_irq = shmobile_handle_irq_intc, .init_machine = ap4evb_init, .init_late = sh7372_pm_init_late, - .timer = &shmobile_timer, + .init_time = sh7372_earlytimer_init, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 5353adf..f2ec077 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -124,6 +124,14 @@ * this command is required when playback. * * # amixer set "Headphone" 50 + * + * this command is required when capture. + * + * # amixer set "Input PGA" 15 + * # amixer set "Left Input Mixer MicP" on + * # amixer set "Left Input Mixer MicN" on + * # amixer set "Right Input Mixer MicN" on + * # amixer set "Right Input Mixer MicP" on */ /* @@ -700,9 +708,9 @@ static int mt9t111_power(struct device *dev, int mode) /* video1 (= CON1 camera) expect 24MHz */ clk_set_rate(mclk, clk_round_rate(mclk, 24000000)); clk_enable(mclk); - gpio_direction_output(GPIO_PORT158, 1); + gpio_set_value(GPIO_PORT158, 1); } else { - gpio_direction_output(GPIO_PORT158, 0); + gpio_set_value(GPIO_PORT158, 0); clk_disable(mclk); } @@ -806,21 +814,21 @@ static struct platform_device fsi_device = { }; /* FSI-WM8978 */ -static struct asoc_simple_dai_init_info fsi_wm8978_init_info = { - .fmt = SND_SOC_DAIFMT_I2S, - .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF, - .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, - .sysclk = 12288000, -}; - static struct asoc_simple_card_info fsi_wm8978_info = { .name = "wm8978", .card = "FSI2A-WM8978", - .cpu_dai = "fsia-dai", .codec = "wm8978.0-001a", .platform = "sh_fsi2", - .codec_dai = "wm8978-hifi", - .init = &fsi_wm8978_init_info, + .daifmt = SND_SOC_DAIFMT_I2S, + .cpu_dai = { + .name = "fsia-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_IB_NF, + }, + .codec_dai = { + .name = "wm8978-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF, + .sysclk = 12288000, + }, }; static struct platform_device fsi_wm8978_device = { @@ -832,18 +840,18 @@ static struct platform_device fsi_wm8978_device = { }; /* FSI-HDMI */ -static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = { - .cpu_daifmt = SND_SOC_DAIFMT_CBM_CFM, -}; - static struct asoc_simple_card_info fsi2_hdmi_info = { .name = "HDMI", .card = "FSI2B-HDMI", - .cpu_dai = "fsib-dai", .codec = "sh-mobile-hdmi", .platform = "sh_fsi2", - .codec_dai = "sh_mobile_hdmi-hifi", - .init = &fsi2_hdmi_init_info, + .cpu_dai = { + .name = "fsib-dai", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + }, + .codec_dai = { + .name = "sh_mobile_hdmi-hifi", + }, }; static struct platform_device fsi_hdmi_device = { @@ -992,16 +1000,12 @@ static void __init eva_init(void) gpio_request(GPIO_FN_LCD0_DISP, NULL); gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL); - gpio_request(GPIO_PORT61, NULL); /* LCDDON */ - gpio_direction_output(GPIO_PORT61, 1); - - gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */ - gpio_direction_output(GPIO_PORT202, 0); + gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ + gpio_request_one(GPIO_PORT202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ /* Touchscreen */ gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */ - gpio_request(GPIO_PORT166, NULL); /* TP_RST_B */ - gpio_direction_output(GPIO_PORT166, 1); + gpio_request_one(GPIO_PORT166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ /* GETHER */ gpio_request(GPIO_FN_ET_CRS, NULL); @@ -1024,12 +1028,10 @@ static void __init eva_init(void) gpio_request(GPIO_FN_ET_RX_DV, NULL); gpio_request(GPIO_FN_ET_RX_CLK, NULL); - gpio_request(GPIO_PORT18, NULL); /* PHY_RST */ - gpio_direction_output(GPIO_PORT18, 1); + gpio_request_one(GPIO_PORT18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ /* USB */ - gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */ - gpio_direction_input(GPIO_PORT159); + gpio_request_one(GPIO_PORT159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */ if (gpio_get_value(GPIO_PORT159)) { /* USB Host */ @@ -1043,8 +1045,7 @@ static void __init eva_init(void) * and select GPIO_PORT209 here */ gpio_request(GPIO_FN_IRQ7_PORT209, NULL); - gpio_request(GPIO_PORT209, NULL); - gpio_direction_input(GPIO_PORT209); + gpio_request_one(GPIO_PORT209, GPIOF_IN, NULL); platform_device_register(&usbhsf_device); usb = &usbhsf_device; @@ -1059,12 +1060,9 @@ static void __init eva_init(void) gpio_request(GPIO_FN_SDHI0_D3, NULL); gpio_request(GPIO_FN_SDHI0_WP, NULL); - gpio_request(GPIO_PORT17, NULL); /* SDHI0_18/33_B */ - gpio_request(GPIO_PORT74, NULL); /* SDHI0_PON */ - gpio_request(GPIO_PORT75, NULL); /* SDSLOT1_PON */ - gpio_direction_output(GPIO_PORT17, 0); - gpio_direction_output(GPIO_PORT74, 1); - gpio_direction_output(GPIO_PORT75, 1); + gpio_request_one(GPIO_PORT17, GPIOF_OUT_INIT_LOW, NULL); /* SDHI0_18/33_B */ + gpio_request_one(GPIO_PORT74, GPIOF_OUT_INIT_HIGH, NULL); /* SDHI0_PON */ + gpio_request_one(GPIO_PORT75, GPIOF_OUT_INIT_HIGH, NULL); /* SDSLOT1_PON */ /* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */ @@ -1101,12 +1099,10 @@ static void __init eva_init(void) gpio_request(GPIO_FN_VIO_CKO, NULL); /* CON1/CON15 Camera */ - gpio_request(GPIO_PORT173, NULL); /* STANDBY */ - gpio_request(GPIO_PORT172, NULL); /* RST */ - gpio_request(GPIO_PORT158, NULL); /* CAM_PON */ - gpio_direction_output(GPIO_PORT173, 0); - gpio_direction_output(GPIO_PORT172, 1); - gpio_direction_output(GPIO_PORT158, 0); /* see mt9t111_power() */ + gpio_request_one(GPIO_PORT173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */ + gpio_request_one(GPIO_PORT172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */ + /* see mt9t111_power() */ + gpio_request_one(GPIO_PORT158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */ /* FSI-WM8978 */ gpio_request(GPIO_FN_FSIAIBT, NULL); @@ -1133,15 +1129,13 @@ static void __init eva_init(void) * DBGMD/LCDC0/FSIA MUX * DBGMD_SELECT_B should be set after setting PFC Function. */ - gpio_request(GPIO_PORT176, NULL); - gpio_direction_output(GPIO_PORT176, 1); + gpio_request_one(GPIO_PORT176, GPIOF_OUT_INIT_HIGH, NULL); /* * We can switch CON8/CON14 by SW1.5, * but it needs after DBGMD_SELECT_B */ - gpio_request(GPIO_PORT6, NULL); - gpio_direction_input(GPIO_PORT6); + gpio_request_one(GPIO_PORT6, GPIOF_IN, NULL); if (gpio_get_value(GPIO_PORT6)) { /* CON14 enable */ } else { @@ -1155,8 +1149,8 @@ static void __init eva_init(void) gpio_request(GPIO_FN_SDHI1_CD, NULL); gpio_request(GPIO_FN_SDHI1_WP, NULL); - gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */ - gpio_direction_output(GPIO_PORT16, 1); + /* SDSLOT2_PON */ + gpio_request_one(GPIO_PORT16, GPIOF_OUT_INIT_HIGH, NULL); platform_device_register(&sdhi1_device); } @@ -1175,26 +1169,26 @@ static void __init eva_init(void) platform_add_devices(eva_devices, ARRAY_SIZE(eva_devices)); - eva_clock_init(); - rmobile_add_device_to_domain("A4LC", &lcdc0_device); rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device); if (usb) rmobile_add_device_to_domain("A3SP", usb); + + r8a7740_pm_init(); } static void __init eva_earlytimer_init(void) { r8a7740_clock_init(MD_CK0 | MD_CK2); shmobile_earlytimer_init(); + + /* the rate of extal1 clock must be set before late_time_init */ + eva_clock_init(); } static void __init eva_add_early_devices(void) { r8a7740_add_early_devices(); - - /* override timer setup with board-specific code */ - shmobile_timer.init = eva_earlytimer_init; } #define RESCNT2 IOMEM(0xe6188020) @@ -1216,7 +1210,7 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .handle_irq = shmobile_handle_irq_intc, .init_machine = eva_init, .init_late = shmobile_init_late, - .timer = &shmobile_timer, + .init_time = eva_earlytimer_init, .dt_compat = eva_boards_compat_dt, .restart = eva_restart, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c index cb8c994..e50f866 100644 --- a/arch/arm/mach-shmobile/board-bonito.c +++ b/arch/arm/mach-shmobile/board-bonito.c @@ -392,8 +392,7 @@ static void __init bonito_init(void) /* * base board settings */ - gpio_request(GPIO_PORT176, NULL); - gpio_direction_input(GPIO_PORT176); + gpio_request_one(GPIO_PORT176, GPIOF_IN, NULL); if (!gpio_get_value(GPIO_PORT176)) { u16 bsw2; u16 bsw3; @@ -462,8 +461,8 @@ static void __init bonito_init(void) gpio_request(GPIO_FN_LCD0_DISP, NULL); gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL); - gpio_request(GPIO_PORT61, NULL); /* LCDDON */ - gpio_direction_output(GPIO_PORT61, 1); + gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, + NULL); /* LCDDON */ /* backlight on */ bonito_fpga_write(LCDCR, 1); @@ -499,9 +498,6 @@ static void __init bonito_earlytimer_init(void) static void __init bonito_add_early_devices(void) { r8a7740_add_early_devices(); - - /* override timer setup with board-specific code */ - shmobile_timer.init = bonito_earlytimer_init; } MACHINE_START(BONITO, "bonito") @@ -511,5 +507,5 @@ MACHINE_START(BONITO, "bonito") .handle_irq = shmobile_handle_irq_intc, .init_machine = bonito_init, .init_late = shmobile_init_late, - .timer = &shmobile_timer, + .init_time = bonito_earlytimer_init, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index bf88f9a..2ccc860 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -35,6 +35,7 @@ #include <linux/input/sh_keysc.h> #include <linux/gpio_keys.h> #include <linux/leds.h> +#include <linux/irqchip/arm-gic.h> #include <linux/platform_data/leds-renesas-tpu.h> #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> @@ -47,7 +48,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <asm/traps.h> @@ -474,10 +474,8 @@ static void __init kota2_init(void) gpio_request(GPIO_FN_D15_NAF15, NULL); gpio_request(GPIO_FN_CS5A_, NULL); gpio_request(GPIO_FN_WE0__FWE, NULL); - gpio_request(GPIO_PORT144, NULL); /* PINTA2 */ - gpio_direction_input(GPIO_PORT144); - gpio_request(GPIO_PORT145, NULL); /* RESET */ - gpio_direction_output(GPIO_PORT145, 1); + gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */ + gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ /* KEYSC */ gpio_request(GPIO_FN_KEYIN0_PU, NULL); @@ -509,8 +507,7 @@ static void __init kota2_init(void) gpio_request(GPIO_FN_MMCD0_6, NULL); gpio_request(GPIO_FN_MMCD0_7, NULL); gpio_request(GPIO_FN_MMCCMD0, NULL); - gpio_request(GPIO_PORT208, NULL); /* Reset */ - gpio_direction_output(GPIO_PORT208, 1); + gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ /* SDHI0 (microSD) */ gpio_request(GPIO_FN_SDHICD0_PU, NULL); @@ -550,8 +547,7 @@ MACHINE_START(KOTA2, "kota2") .init_early = sh73a0_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, - .handle_irq = gic_handle_irq, .init_machine = kota2_init, .init_late = shmobile_init_late, - .timer = &shmobile_timer, + .init_time = sh73a0_earlytimer_init, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index b52bc0d..c254782 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -28,7 +28,6 @@ #include <mach/emev2.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> /* Dummy supplies, where voltage doesn't matter */ static struct regulator_consumer_supply dummy_supplies[] = { @@ -89,9 +88,8 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d") .init_early = emev2_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = emev2_init_irq, - .handle_irq = gic_handle_irq, .init_machine = kzm9d_add_standard_devices, .init_late = shmobile_init_late, - .timer = &shmobile_timer, + .init_time = shmobile_timer_init, .dt_compat = kzm9d_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index c02448d..7f3a6b7 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -25,6 +25,7 @@ #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/input.h> +#include <linux/irqchip/arm-gic.h> #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> #include <linux/mmc/sh_mobile_sdhi.h> @@ -42,7 +43,6 @@ #include <mach/sh73a0.h> #include <mach/common.h> #include <asm/hardware/cache-l2x0.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <video/sh_mobile_lcdc.h> @@ -525,21 +525,21 @@ static struct platform_device fsi_device = { }, }; -static struct asoc_simple_dai_init_info fsi2_ak4648_init_info = { - .fmt = SND_SOC_DAIFMT_LEFT_J, - .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, - .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, - .sysclk = 11289600, -}; - static struct asoc_simple_card_info fsi2_ak4648_info = { .name = "AK4648", .card = "FSI2A-AK4648", - .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0012", .platform = "sh_fsi2", - .codec_dai = "ak4642-hifi", - .init = &fsi2_ak4648_init_info, + .daifmt = SND_SOC_DAIFMT_LEFT_J, + .cpu_dai = { + .name = "fsia-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS, + }, + .codec_dai = { + .name = "ak4642-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + .sysclk = 11289600, + }, }; static struct platform_device fsi_ak4648_device = { @@ -623,7 +623,7 @@ static int __init as3711_enable_lcdc_backlight(void) 0x45, 0xf0, }; - if (!machine_is_kzm9g()) + if (!of_machine_is_compatible("renesas,kzm9g")) return 0; if (!a) @@ -672,8 +672,7 @@ static void __init kzm_init(void) gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */ /* SMSC */ - gpio_request(GPIO_PORT224, NULL); /* IRQ3 */ - gpio_direction_input(GPIO_PORT224); + gpio_request_one(GPIO_PORT224, GPIOF_IN, NULL); /* IRQ3 */ /* LCDC */ gpio_request(GPIO_FN_LCDD23, NULL); @@ -703,14 +702,11 @@ static void __init kzm_init(void) gpio_request(GPIO_FN_LCDDISP, NULL); gpio_request(GPIO_FN_LCDDCK, NULL); - gpio_request(GPIO_PORT222, NULL); /* LCDCDON */ - gpio_request(GPIO_PORT226, NULL); /* SC */ - gpio_direction_output(GPIO_PORT222, 1); - gpio_direction_output(GPIO_PORT226, 1); + gpio_request_one(GPIO_PORT222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */ + gpio_request_one(GPIO_PORT226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */ /* Touchscreen */ - gpio_request(GPIO_PORT223, NULL); /* IRQ8 */ - gpio_direction_input(GPIO_PORT223); + gpio_request_one(GPIO_PORT223, GPIOF_IN, NULL); /* IRQ8 */ /* enable MMCIF */ gpio_request(GPIO_FN_MMCCLK0, NULL); @@ -734,8 +730,7 @@ static void __init kzm_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); - gpio_request(GPIO_PORT15, NULL); - gpio_direction_output(GPIO_PORT15, 1); /* power */ + gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ /* enable Micro SD */ gpio_request(GPIO_FN_SDHID2_0, NULL); @@ -744,8 +739,7 @@ static void __init kzm_init(void) gpio_request(GPIO_FN_SDHID2_3, NULL); gpio_request(GPIO_FN_SDHICMD2, NULL); gpio_request(GPIO_FN_SDHICLK2, NULL); - gpio_request(GPIO_PORT14, NULL); - gpio_direction_output(GPIO_PORT14, 1); /* power */ + gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ /* I2C 3 */ gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL); @@ -772,6 +766,8 @@ static void __init kzm_init(void) sh73a0_add_standard_devices(); platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices)); + + sh73a0_pm_init(); } static void kzm9g_restart(char mode, const char *cmd) @@ -792,10 +788,9 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g") .init_early = sh73a0_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, - .handle_irq = gic_handle_irq, .init_machine = kzm_init, .init_late = shmobile_init_late, - .timer = &shmobile_timer, + .init_time = sh73a0_earlytimer_init, .restart = kzm9g_restart, .dt_compat = kzm9g_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 2fed62f..db968a5 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -202,9 +202,7 @@ * * it needs amixer settings for playing * - * amixer set "Headphone" on - * amixer set "HPOUTL Mixer DACH" on - * amixer set "HPOUTR Mixer DACH" on + * amixer set "Headphone Enable" on */ /* Fixed 3.3V and 1.8V regulators to be used by multiple devices */ @@ -502,18 +500,18 @@ static struct platform_device hdmi_lcdc_device = { }, }; -static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = { - .cpu_daifmt = SND_SOC_DAIFMT_CBM_CFM, -}; - static struct asoc_simple_card_info fsi2_hdmi_info = { .name = "HDMI", .card = "FSI2B-HDMI", - .cpu_dai = "fsib-dai", .codec = "sh-mobile-hdmi", .platform = "sh_fsi2", - .codec_dai = "sh_mobile_hdmi-hifi", - .init = &fsi2_hdmi_init_info, + .cpu_dai = { + .name = "fsib-dai", + .fmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF, + }, + .codec_dai = { + .name = "sh_mobile_hdmi-hifi", + }, }; static struct platform_device fsi_hdmi_device = { @@ -858,16 +856,12 @@ static struct platform_device leds_device = { #define IRQ_FSI evt2irq(0x1840) static struct sh_fsi_platform_info fsi_info = { .port_a = { - .flags = SH_FSI_BRS_INV, .tx_id = SHDMA_SLAVE_FSIA_TX, .rx_id = SHDMA_SLAVE_FSIA_RX, }, .port_b = { - .flags = SH_FSI_BRS_INV | - SH_FSI_BRM_INV | - SH_FSI_LRS_INV | - SH_FSI_CLK_CPG | - SH_FSI_FMT_SPDIF, + .flags = SH_FSI_CLK_CPG | + SH_FSI_FMT_SPDIF, } }; @@ -896,21 +890,21 @@ static struct platform_device fsi_device = { }, }; -static struct asoc_simple_dai_init_info fsi2_ak4643_init_info = { - .fmt = SND_SOC_DAIFMT_LEFT_J, - .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, - .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, - .sysclk = 11289600, -}; - static struct asoc_simple_card_info fsi2_ak4643_info = { .name = "AK4643", .card = "FSI2A-AK4643", - .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0013", .platform = "sh_fsi2", - .codec_dai = "ak4642-hifi", - .init = &fsi2_ak4643_init_info, + .daifmt = SND_SOC_DAIFMT_LEFT_J, + .cpu_dai = { + .name = "fsia-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS, + }, + .codec_dai = { + .name = "ak4642-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + .sysclk = 11289600, + }, }; static struct platform_device fsi_ak4643_device = { @@ -1408,11 +1402,10 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_LCDDISP, NULL); gpio_request(GPIO_FN_LCDDCK, NULL); - gpio_request(GPIO_PORT31, NULL); /* backlight */ - gpio_direction_output(GPIO_PORT31, 0); /* off by default */ + /* backlight, off by default */ + gpio_request_one(GPIO_PORT31, GPIOF_OUT_INIT_LOW, NULL); - gpio_request(GPIO_PORT151, NULL); /* LCDDON */ - gpio_direction_output(GPIO_PORT151, 1); + gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ /* USBHS0 */ gpio_request(GPIO_FN_VBUS0_0, NULL); @@ -1428,8 +1421,7 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); gpio_request(GPIO_FN_FSIAOSLD, NULL); - gpio_request(GPIO_PORT161, NULL); - gpio_direction_output(GPIO_PORT161, 0); /* slave */ + gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */ gpio_request(GPIO_PORT9, NULL); gpio_request(GPIO_PORT10, NULL); @@ -1483,8 +1475,7 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID1_0, NULL); #endif /* card detect pin for MMC slot (CN7) */ - gpio_request(GPIO_PORT41, NULL); - gpio_direction_input(GPIO_PORT41); + gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL); /* enable SDHI2 */ gpio_request(GPIO_FN_SDHICMD2, NULL); @@ -1495,8 +1486,7 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID2_0, NULL); /* card detect pin for microSD slot (CN23) */ - gpio_request(GPIO_PORT162, NULL); - gpio_direction_input(GPIO_PORT162); + gpio_request_one(GPIO_PORT162, GPIOF_IN, NULL); /* MMCIF */ gpio_request(GPIO_FN_MMCD0_0, NULL); @@ -1593,6 +1583,6 @@ DT_MACHINE_START(MACKEREL_DT, "mackerel") .handle_irq = shmobile_handle_irq_intc, .init_machine = mackerel_init, .init_late = sh7372_pm_init_late, - .timer = &shmobile_timer, + .init_time = sh7372_earlytimer_init, .dt_compat = mackerel_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 449f928..cdcb799 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -44,7 +44,6 @@ #include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <asm/traps.h> /* Fixed 3.3V regulator to be used by SDHI0 */ @@ -382,8 +381,7 @@ MACHINE_START(MARZEN, "marzen") .init_early = r8a7779_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = r8a7779_init_irq, - .handle_irq = gic_handle_irq, .init_machine = marzen_init, .init_late = marzen_init_late, - .timer = &shmobile_timer, + .init_time = r8a7779_earlytimer_init, MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index eac49d5..19ce885 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -581,10 +581,14 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP111]), + CLKDEV_DEV_ID("sh_tmu.3", &mstp_clks[MSTP111]), + CLKDEV_DEV_ID("sh_tmu.4", &mstp_clks[MSTP111]), + CLKDEV_DEV_ID("sh_tmu.5", &mstp_clks[MSTP111]), CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), + CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), + CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP125]), CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]), diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index c019609..1db3653 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -162,6 +162,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */ + CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP016]), /* TMU02 */ CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */ diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 3ca6757b..45d21fe 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -544,6 +544,7 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ + CLKDEV_DEV_ID("fff30000.i2c", &mstp_clks[MSTP001]), /* IIC2 */ CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */ CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ @@ -556,6 +557,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ + CLKDEV_DEV_ID("fff20000.i2c", &mstp_clks[MSTP116]), /* IIC0 */ CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[MSTP113]), /* MERAM */ CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */ CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */ @@ -577,18 +579,25 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ + CLKDEV_DEV_ID("e6c20000.i2c", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("sh_flctl.0", &mstp_clks[MSTP315]), /* FLCTL */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ + CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ + CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */ + CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMC */ CLKDEV_DEV_ID("sh-mipi-dsi.1", &mstp_clks[MSTP423]), /* DSITX1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */ + CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), /* SDHI2 */ CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */ + CLKDEV_DEV_ID("e6d20000.i2c", &mstp_clks[MSTP411]), /* IIC3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */ + CLKDEV_DEV_ID("e6d30000.i2c", &mstp_clks[MSTP410]), /* IIC4 */ CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */ CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 516ff7f..afa5423 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -264,17 +264,17 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2, SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags) static struct clk div4_clks[DIV4_NR] = { - [DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT), - [DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT), - [DIV4_M3] = DIV4(FRQCRA, 12, 0xfff, CLK_ENABLE_ON_INIT), - [DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT), - [DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0), - [DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0), - [DIV4_Z] = DIV4(FRQCRB, 24, 0xbff, 0), - [DIV4_ZTR] = DIV4(FRQCRB, 20, 0xfff, 0), - [DIV4_ZT] = DIV4(FRQCRB, 16, 0xfff, 0), - [DIV4_ZX] = DIV4(FRQCRB, 12, 0xfff, 0), - [DIV4_HP] = DIV4(FRQCRB, 4, 0xfff, 0), + [DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT), + [DIV4_ZG] = DIV4(FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT), + [DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT), + [DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT), + [DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0), + [DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0), + [DIV4_Z] = DIV4(FRQCRB, 24, 0x97f, 0), + [DIV4_ZTR] = DIV4(FRQCRB, 20, 0xdff, 0), + [DIV4_ZT] = DIV4(FRQCRB, 16, 0xdff, 0), + [DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0), + [DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0), }; enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1, @@ -525,6 +525,13 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ }; +/* The lookups structure below includes duplicate entries for some clocks + * with alternate names. + * - The traditional name used when a device is initialised with platform data + * - The name used when a device is initialised using device tree + * The longer-term aim is to remove these duplicates, and indeed the + * lookups table entirely, by describing clocks using device tree. + */ static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("r_clk", &r_clk), @@ -545,6 +552,7 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ + CLKDEV_DEV_ID("e6824000.i2c", &mstp_clks[MSTP001]), /* I2C2 */ CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */ CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */ @@ -553,6 +561,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */ CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ + CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */ @@ -569,17 +578,21 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ + CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */ CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ + CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */ CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */ CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */ CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ + CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */ + CLKDEV_DEV_ID("e6828000.i2c", &mstp_clks[MSTP410]), /* I2C4 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ }; diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-sh73a0.S new file mode 100644 index 0000000..bec4c0d --- /dev/null +++ b/arch/arm/mach-shmobile/headsmp-sh73a0.S @@ -0,0 +1,50 @@ +/* + * SMP support for SoC sh73a0 + * + * Copyright (C) 2012 Bastian Hecht + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/memory.h> + + __CPUINIT +/* + * Reset vector for secondary CPUs. + * + * First we turn on L1 cache coherency for our CPU. Then we jump to + * shmobile_invalidate_start that invalidates the cache and hands over control + * to the common ARM startup code. + * This function will be mapped to address 0 by the SBAR register. + * A normal branch is out of range here so we need a long jump. We jump to + * the physical address as the MMU is still turned off. + */ + .align 12 +ENTRY(sh73a0_secondary_vector) + mrc p15, 0, r0, c0, c0, 5 @ read MIPDR + and r0, r0, #3 @ mask out cpu ID + lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits + mov r1, #0xf0000000 @ SCU base address + ldr r2, [r1, #8] @ SCU Power Status Register + mov r3, #3 + bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode) + str r2, [r1, #8] @ write back + + ldr pc, 1f +1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET +ENDPROC(sh73a0_secondary_vector) diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index b202c12..96001fd 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -16,54 +16,6 @@ __CPUINIT -/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks! - * - * The secondary kernel init calls v7_flush_dcache_all before it enables - * the L1; however, the L1 comes out of reset in an undefined state, so - * the clean + invalidate performed by v7_flush_dcache_all causes a bunch - * of cache lines with uninitialized data and uninitialized tags to get - * written out to memory, which does really unpleasant things to the main - * processor. We fix this by performing an invalidate, rather than a - * clean + invalidate, before jumping into the kernel. - * - * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs - * to be called for both secondary cores startup and primary core resume - * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S. - */ -ENTRY(v7_invalidate_l1) - mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mcr p15, 2, r0, c0, c0, 0 - mrc p15, 1, r0, c0, c0, 0 - - ldr r1, =0x7fff - and r2, r1, r0, lsr #13 - - ldr r1, =0x3ff - - and r3, r1, r0, lsr #3 @ NumWays - 1 - add r2, r2, #1 @ NumSets - - and r0, r0, #0x7 - add r0, r0, #4 @ SetShift - - clz r1, r3 @ WayShift - add r4, r3, #1 @ NumWays -1: sub r2, r2, #1 @ NumSets-- - mov r3, r4 @ Temp = NumWays -2: subs r3, r3, #1 @ Temp-- - mov r5, r3, lsl r1 - mov r6, r2, lsl r0 - orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) - mcr p15, 0, r5, c7, c6, 2 - bgt 2b - cmp r2, #0 - bgt 1b - dsb - isb - mov pc, lr -ENDPROC(v7_invalidate_l1) - ENTRY(shmobile_invalidate_start) bl v7_invalidate_l1 b secondary_startup diff --git a/arch/arm/mach-shmobile/hotplug.c b/arch/arm/mach-shmobile/hotplug.c index b09a0bd..a1524e3 100644 --- a/arch/arm/mach-shmobile/hotplug.c +++ b/arch/arm/mach-shmobile/hotplug.c @@ -56,6 +56,12 @@ int shmobile_cpu_disable(unsigned int cpu) return cpu == 0 ? -EPERM : 0; } +int shmobile_cpu_disable_any(unsigned int cpu) +{ + cpumask_clear_cpu(cpu, &dead_cpus); + return 0; +} + int shmobile_cpu_is_dead(unsigned int cpu) { return cpumask_test_cpu(cpu, &dead_cpus); diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index dfeca79..e48606d 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -2,7 +2,7 @@ #define __ARCH_MACH_COMMON_H extern void shmobile_earlytimer_init(void); -extern struct sys_timer shmobile_timer; +extern void shmobile_timer_init(void); extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div); struct twd_local_timer; @@ -20,8 +20,11 @@ extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv); extern void sh7372_init_irq(void); extern void sh7372_map_io(void); +extern void sh7372_earlytimer_init(void); extern void sh7372_add_early_devices(void); extern void sh7372_add_standard_devices(void); +extern void sh7372_add_early_devices_dt(void); +extern void sh7372_add_standard_devices_dt(void); extern void sh7372_clock_init(void); extern void sh7372_pinmux_init(void); extern void sh7372_pm_init(void); @@ -31,11 +34,17 @@ extern struct clk sh7372_extal1_clk; extern struct clk sh7372_extal2_clk; extern void sh73a0_init_irq(void); +extern void sh73a0_init_irq_dt(void); extern void sh73a0_map_io(void); +extern void sh73a0_earlytimer_init(void); extern void sh73a0_add_early_devices(void); +extern void sh73a0_add_early_devices_dt(void); extern void sh73a0_add_standard_devices(void); +extern void sh73a0_add_standard_devices_dt(void); extern void sh73a0_clock_init(void); extern void sh73a0_pinmux_init(void); +extern void sh73a0_pm_init(void); +extern void sh73a0_secondary_vector(void); extern struct clk sh73a0_extal1_clk; extern struct clk sh73a0_extal2_clk; extern struct clk sh73a0_extcki_clk; @@ -47,9 +56,11 @@ extern void r8a7740_add_early_devices(void); extern void r8a7740_add_standard_devices(void); extern void r8a7740_clock_init(u8 md_ck); extern void r8a7740_pinmux_init(void); +extern void r8a7740_pm_init(void); extern void r8a7779_init_irq(void); extern void r8a7779_map_io(void); +extern void r8a7779_earlytimer_init(void); extern void r8a7779_add_early_devices(void); extern void r8a7779_add_standard_devices(void); extern void r8a7779_clock_init(void); @@ -73,6 +84,7 @@ static inline int shmobile_cpuidle_init(void) { return 0; } extern void shmobile_cpu_die(unsigned int cpu); extern int shmobile_cpu_disable(unsigned int cpu); +extern int shmobile_cpu_disable_any(unsigned int cpu); #ifdef CONFIG_HOTPLUG_CPU extern int shmobile_cpu_is_dead(unsigned int cpu); diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h index 0bd7556..f1aee567 100644 --- a/arch/arm/mach-shmobile/include/mach/uncompress.h +++ b/arch/arm/mach-shmobile/include/mach/uncompress.h @@ -16,6 +16,4 @@ static void arch_decomp_setup(void) { } -#define arch_decomp_wdog() - #endif /* __ASM_MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c index ef66f1a..8807c27 100644 --- a/arch/arm/mach-shmobile/intc-r8a7779.c +++ b/arch/arm/mach-shmobile/intc-r8a7779.c @@ -22,10 +22,10 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/intc.h> #include <mach/r8a7779.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index f0c5e51..91faba6 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -23,10 +23,11 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/sh_intc.h> +#include <linux/irqchip.h> +#include <linux/irqchip/arm-gic.h> #include <mach/intc.h> #include <mach/irqs.h> #include <mach/sh73a0.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -315,11 +316,6 @@ static int intca_gic_set_type(struct irq_data *data, unsigned int type) return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type); } -static int intca_gic_set_wake(struct irq_data *data, unsigned int on) -{ - return irq_cbp(irq_set_wake, to_intca_reloc_irq(data), on); -} - #ifdef CONFIG_SMP static int intca_gic_set_affinity(struct irq_data *data, const struct cpumask *cpumask, @@ -339,7 +335,7 @@ struct irq_chip intca_gic_irq_chip = { .irq_disable = intca_gic_disable, .irq_shutdown = intca_gic_disable, .irq_set_type = intca_gic_set_type, - .irq_set_wake = intca_gic_set_wake, + .irq_set_wake = sh73a0_set_wake, #ifdef CONFIG_SMP .irq_set_affinity = intca_gic_set_affinity, #endif @@ -464,3 +460,11 @@ void __init sh73a0_init_irq(void) sh73a0_pint1_cascade.handler = sh73a0_pint1_demux; setup_irq(gic_spi(34), &sh73a0_pint1_cascade); } + +#ifdef CONFIG_OF +void __init sh73a0_init_irq_dt(void) +{ + irqchip_init(); + gic_arch_extn.irq_set_wake = sh73a0_set_wake; +} +#endif diff --git a/arch/arm/mach-shmobile/pfc-r8a7740.c b/arch/arm/mach-shmobile/pfc-r8a7740.c deleted file mode 100644 index 134d1b9..0000000 --- a/arch/arm/mach-shmobile/pfc-r8a7740.c +++ /dev/null @@ -1,2617 +0,0 @@ -/* - * R8A7740 processor support - * - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the - * License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sh_pfc.h> -#include <mach/r8a7740.h> -#include <mach/irqs.h> - -#define CPU_ALL_PORT(fn, pfx, sfx) \ - PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \ - PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \ - PORT_10(fn, pfx##20, sfx), \ - PORT_1(fn, pfx##210, sfx), PORT_1(fn, pfx##211, sfx) - -enum { - PINMUX_RESERVED = 0, - - /* PORT0_DATA -> PORT211_DATA */ - PINMUX_DATA_BEGIN, - PORT_ALL(DATA), - PINMUX_DATA_END, - - /* PORT0_IN -> PORT211_IN */ - PINMUX_INPUT_BEGIN, - PORT_ALL(IN), - PINMUX_INPUT_END, - - /* PORT0_IN_PU -> PORT211_IN_PU */ - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), - PINMUX_INPUT_PULLUP_END, - - /* PORT0_IN_PD -> PORT211_IN_PD */ - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), - PINMUX_INPUT_PULLDOWN_END, - - /* PORT0_OUT -> PORT211_OUT */ - PINMUX_OUTPUT_BEGIN, - PORT_ALL(OUT), - PINMUX_OUTPUT_END, - - PINMUX_FUNCTION_BEGIN, - PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT211_FN_IN */ - PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT211_FN_OUT */ - PORT_ALL(FN0), /* PORT0_FN0 -> PORT211_FN0 */ - PORT_ALL(FN1), /* PORT0_FN1 -> PORT211_FN1 */ - PORT_ALL(FN2), /* PORT0_FN2 -> PORT211_FN2 */ - PORT_ALL(FN3), /* PORT0_FN3 -> PORT211_FN3 */ - PORT_ALL(FN4), /* PORT0_FN4 -> PORT211_FN4 */ - PORT_ALL(FN5), /* PORT0_FN5 -> PORT211_FN5 */ - PORT_ALL(FN6), /* PORT0_FN6 -> PORT211_FN6 */ - PORT_ALL(FN7), /* PORT0_FN7 -> PORT211_FN7 */ - - MSEL1CR_31_0, MSEL1CR_31_1, - MSEL1CR_30_0, MSEL1CR_30_1, - MSEL1CR_29_0, MSEL1CR_29_1, - MSEL1CR_28_0, MSEL1CR_28_1, - MSEL1CR_27_0, MSEL1CR_27_1, - MSEL1CR_26_0, MSEL1CR_26_1, - MSEL1CR_16_0, MSEL1CR_16_1, - MSEL1CR_15_0, MSEL1CR_15_1, - MSEL1CR_14_0, MSEL1CR_14_1, - MSEL1CR_13_0, MSEL1CR_13_1, - MSEL1CR_12_0, MSEL1CR_12_1, - MSEL1CR_9_0, MSEL1CR_9_1, - MSEL1CR_7_0, MSEL1CR_7_1, - MSEL1CR_6_0, MSEL1CR_6_1, - MSEL1CR_5_0, MSEL1CR_5_1, - MSEL1CR_4_0, MSEL1CR_4_1, - MSEL1CR_3_0, MSEL1CR_3_1, - MSEL1CR_2_0, MSEL1CR_2_1, - MSEL1CR_0_0, MSEL1CR_0_1, - - MSEL3CR_15_0, MSEL3CR_15_1, /* Trace / Debug ? */ - MSEL3CR_6_0, MSEL3CR_6_1, - - MSEL4CR_19_0, MSEL4CR_19_1, - MSEL4CR_18_0, MSEL4CR_18_1, - MSEL4CR_15_0, MSEL4CR_15_1, - MSEL4CR_10_0, MSEL4CR_10_1, - MSEL4CR_6_0, MSEL4CR_6_1, - MSEL4CR_4_0, MSEL4CR_4_1, - MSEL4CR_1_0, MSEL4CR_1_1, - - MSEL5CR_31_0, MSEL5CR_31_1, /* irq/fiq output */ - MSEL5CR_30_0, MSEL5CR_30_1, - MSEL5CR_29_0, MSEL5CR_29_1, - MSEL5CR_27_0, MSEL5CR_27_1, - MSEL5CR_25_0, MSEL5CR_25_1, - MSEL5CR_23_0, MSEL5CR_23_1, - MSEL5CR_21_0, MSEL5CR_21_1, - MSEL5CR_19_0, MSEL5CR_19_1, - MSEL5CR_17_0, MSEL5CR_17_1, - MSEL5CR_15_0, MSEL5CR_15_1, - MSEL5CR_14_0, MSEL5CR_14_1, - MSEL5CR_13_0, MSEL5CR_13_1, - MSEL5CR_12_0, MSEL5CR_12_1, - MSEL5CR_11_0, MSEL5CR_11_1, - MSEL5CR_10_0, MSEL5CR_10_1, - MSEL5CR_8_0, MSEL5CR_8_1, - MSEL5CR_7_0, MSEL5CR_7_1, - MSEL5CR_6_0, MSEL5CR_6_1, - MSEL5CR_5_0, MSEL5CR_5_1, - MSEL5CR_4_0, MSEL5CR_4_1, - MSEL5CR_3_0, MSEL5CR_3_1, - MSEL5CR_2_0, MSEL5CR_2_1, - MSEL5CR_0_0, MSEL5CR_0_1, - PINMUX_FUNCTION_END, - - PINMUX_MARK_BEGIN, - - /* IRQ */ - IRQ0_PORT2_MARK, IRQ0_PORT13_MARK, - IRQ1_MARK, - IRQ2_PORT11_MARK, IRQ2_PORT12_MARK, - IRQ3_PORT10_MARK, IRQ3_PORT14_MARK, - IRQ4_PORT15_MARK, IRQ4_PORT172_MARK, - IRQ5_PORT0_MARK, IRQ5_PORT1_MARK, - IRQ6_PORT121_MARK, IRQ6_PORT173_MARK, - IRQ7_PORT120_MARK, IRQ7_PORT209_MARK, - IRQ8_MARK, - IRQ9_PORT118_MARK, IRQ9_PORT210_MARK, - IRQ10_MARK, - IRQ11_MARK, - IRQ12_PORT42_MARK, IRQ12_PORT97_MARK, - IRQ13_PORT64_MARK, IRQ13_PORT98_MARK, - IRQ14_PORT63_MARK, IRQ14_PORT99_MARK, - IRQ15_PORT62_MARK, IRQ15_PORT100_MARK, - IRQ16_PORT68_MARK, IRQ16_PORT211_MARK, - IRQ17_MARK, - IRQ18_MARK, - IRQ19_MARK, - IRQ20_MARK, - IRQ21_MARK, - IRQ22_MARK, - IRQ23_MARK, - IRQ24_MARK, - IRQ25_MARK, - IRQ26_PORT58_MARK, IRQ26_PORT81_MARK, - IRQ27_PORT57_MARK, IRQ27_PORT168_MARK, - IRQ28_PORT56_MARK, IRQ28_PORT169_MARK, - IRQ29_PORT50_MARK, IRQ29_PORT170_MARK, - IRQ30_PORT49_MARK, IRQ30_PORT171_MARK, - IRQ31_PORT41_MARK, IRQ31_PORT167_MARK, - - /* Function */ - - /* DBGT */ - DBGMDT2_MARK, DBGMDT1_MARK, DBGMDT0_MARK, - DBGMD10_MARK, DBGMD11_MARK, DBGMD20_MARK, - DBGMD21_MARK, - - /* FSI-A */ - FSIAISLD_PORT0_MARK, /* FSIAISLD Port 0/5 */ - FSIAISLD_PORT5_MARK, - FSIASPDIF_PORT9_MARK, /* FSIASPDIF Port 9/18 */ - FSIASPDIF_PORT18_MARK, - FSIAOSLD1_MARK, FSIAOSLD2_MARK, FSIAOLR_MARK, - FSIAOBT_MARK, FSIAOSLD_MARK, FSIAOMC_MARK, - FSIACK_MARK, FSIAILR_MARK, FSIAIBT_MARK, - - /* FSI-B */ - FSIBCK_MARK, - - /* FMSI */ - FMSISLD_PORT1_MARK, /* FMSISLD Port 1/6 */ - FMSISLD_PORT6_MARK, - FMSIILR_MARK, FMSIIBT_MARK, FMSIOLR_MARK, FMSIOBT_MARK, - FMSICK_MARK, FMSOILR_MARK, FMSOIBT_MARK, FMSOOLR_MARK, - FMSOOBT_MARK, FMSOSLD_MARK, FMSOCK_MARK, - - /* SCIFA0 */ - SCIFA0_SCK_MARK, SCIFA0_CTS_MARK, SCIFA0_RTS_MARK, - SCIFA0_RXD_MARK, SCIFA0_TXD_MARK, - - /* SCIFA1 */ - SCIFA1_CTS_MARK, SCIFA1_SCK_MARK, SCIFA1_RXD_MARK, - SCIFA1_TXD_MARK, SCIFA1_RTS_MARK, - - /* SCIFA2 */ - SCIFA2_SCK_PORT22_MARK, /* SCIFA2_SCK Port 22/199 */ - SCIFA2_SCK_PORT199_MARK, - SCIFA2_RXD_MARK, SCIFA2_TXD_MARK, - SCIFA2_CTS_MARK, SCIFA2_RTS_MARK, - - /* SCIFA3 */ - SCIFA3_RTS_PORT105_MARK, /* MSEL5CR_8_0 */ - SCIFA3_SCK_PORT116_MARK, - SCIFA3_CTS_PORT117_MARK, - SCIFA3_RXD_PORT174_MARK, - SCIFA3_TXD_PORT175_MARK, - - SCIFA3_RTS_PORT161_MARK, /* MSEL5CR_8_1 */ - SCIFA3_SCK_PORT158_MARK, - SCIFA3_CTS_PORT162_MARK, - SCIFA3_RXD_PORT159_MARK, - SCIFA3_TXD_PORT160_MARK, - - /* SCIFA4 */ - SCIFA4_RXD_PORT12_MARK, /* MSEL5CR[12:11] = 00 */ - SCIFA4_TXD_PORT13_MARK, - - SCIFA4_RXD_PORT204_MARK, /* MSEL5CR[12:11] = 01 */ - SCIFA4_TXD_PORT203_MARK, - - SCIFA4_RXD_PORT94_MARK, /* MSEL5CR[12:11] = 10 */ - SCIFA4_TXD_PORT93_MARK, - - SCIFA4_SCK_PORT21_MARK, /* SCIFA4_SCK Port 21/205 */ - SCIFA4_SCK_PORT205_MARK, - - /* SCIFA5 */ - SCIFA5_TXD_PORT20_MARK, /* MSEL5CR[15:14] = 00 */ - SCIFA5_RXD_PORT10_MARK, - - SCIFA5_RXD_PORT207_MARK, /* MSEL5CR[15:14] = 01 */ - SCIFA5_TXD_PORT208_MARK, - - SCIFA5_TXD_PORT91_MARK, /* MSEL5CR[15:14] = 10 */ - SCIFA5_RXD_PORT92_MARK, - - SCIFA5_SCK_PORT23_MARK, /* SCIFA5_SCK Port 23/206 */ - SCIFA5_SCK_PORT206_MARK, - - /* SCIFA6 */ - SCIFA6_SCK_MARK, SCIFA6_RXD_MARK, SCIFA6_TXD_MARK, - - /* SCIFA7 */ - SCIFA7_TXD_MARK, SCIFA7_RXD_MARK, - - /* SCIFAB */ - SCIFB_SCK_PORT190_MARK, /* MSEL5CR_17_0 */ - SCIFB_RXD_PORT191_MARK, - SCIFB_TXD_PORT192_MARK, - SCIFB_RTS_PORT186_MARK, - SCIFB_CTS_PORT187_MARK, - - SCIFB_SCK_PORT2_MARK, /* MSEL5CR_17_1 */ - SCIFB_RXD_PORT3_MARK, - SCIFB_TXD_PORT4_MARK, - SCIFB_RTS_PORT172_MARK, - SCIFB_CTS_PORT173_MARK, - - /* LCD0 */ - LCDC0_SELECT_MARK, - - LCD0_D0_MARK, LCD0_D1_MARK, LCD0_D2_MARK, LCD0_D3_MARK, - LCD0_D4_MARK, LCD0_D5_MARK, LCD0_D6_MARK, LCD0_D7_MARK, - LCD0_D8_MARK, LCD0_D9_MARK, LCD0_D10_MARK, LCD0_D11_MARK, - LCD0_D12_MARK, LCD0_D13_MARK, LCD0_D14_MARK, LCD0_D15_MARK, - LCD0_D16_MARK, LCD0_D17_MARK, - LCD0_DON_MARK, LCD0_VCPWC_MARK, LCD0_VEPWC_MARK, - LCD0_DCK_MARK, LCD0_VSYN_MARK, /* for RGB */ - LCD0_HSYN_MARK, LCD0_DISP_MARK, /* for RGB */ - LCD0_WR_MARK, LCD0_RD_MARK, /* for SYS */ - LCD0_CS_MARK, LCD0_RS_MARK, /* for SYS */ - - LCD0_D21_PORT158_MARK, LCD0_D23_PORT159_MARK, /* MSEL5CR_6_1 */ - LCD0_D22_PORT160_MARK, LCD0_D20_PORT161_MARK, - LCD0_D19_PORT162_MARK, LCD0_D18_PORT163_MARK, - LCD0_LCLK_PORT165_MARK, - - LCD0_D18_PORT40_MARK, LCD0_D22_PORT0_MARK, /* MSEL5CR_6_0 */ - LCD0_D23_PORT1_MARK, LCD0_D21_PORT2_MARK, - LCD0_D20_PORT3_MARK, LCD0_D19_PORT4_MARK, - LCD0_LCLK_PORT102_MARK, - - /* LCD1 */ - LCDC1_SELECT_MARK, - - LCD1_D0_MARK, LCD1_D1_MARK, LCD1_D2_MARK, LCD1_D3_MARK, - LCD1_D4_MARK, LCD1_D5_MARK, LCD1_D6_MARK, LCD1_D7_MARK, - LCD1_D8_MARK, LCD1_D9_MARK, LCD1_D10_MARK, LCD1_D11_MARK, - LCD1_D12_MARK, LCD1_D13_MARK, LCD1_D14_MARK, LCD1_D15_MARK, - LCD1_D16_MARK, LCD1_D17_MARK, LCD1_D18_MARK, LCD1_D19_MARK, - LCD1_D20_MARK, LCD1_D21_MARK, LCD1_D22_MARK, LCD1_D23_MARK, - LCD1_DON_MARK, LCD1_VCPWC_MARK, - LCD1_LCLK_MARK, LCD1_VEPWC_MARK, - - LCD1_DCK_MARK, LCD1_VSYN_MARK, /* for RGB */ - LCD1_HSYN_MARK, LCD1_DISP_MARK, /* for RGB */ - LCD1_RS_MARK, LCD1_CS_MARK, /* for SYS */ - LCD1_RD_MARK, LCD1_WR_MARK, /* for SYS */ - - /* RSPI */ - RSPI_SSL0_A_MARK, RSPI_SSL1_A_MARK, RSPI_SSL2_A_MARK, - RSPI_SSL3_A_MARK, RSPI_CK_A_MARK, RSPI_MOSI_A_MARK, - RSPI_MISO_A_MARK, - - /* VIO CKO */ - VIO_CKO1_MARK, /* needs fixup */ - VIO_CKO2_MARK, - VIO_CKO_1_MARK, - VIO_CKO_MARK, - - /* VIO0 */ - VIO0_D0_MARK, VIO0_D1_MARK, VIO0_D2_MARK, VIO0_D3_MARK, - VIO0_D4_MARK, VIO0_D5_MARK, VIO0_D6_MARK, VIO0_D7_MARK, - VIO0_D8_MARK, VIO0_D9_MARK, VIO0_D10_MARK, VIO0_D11_MARK, - VIO0_D12_MARK, VIO0_VD_MARK, VIO0_HD_MARK, VIO0_CLK_MARK, - VIO0_FIELD_MARK, - - VIO0_D13_PORT26_MARK, /* MSEL5CR_27_0 */ - VIO0_D14_PORT25_MARK, - VIO0_D15_PORT24_MARK, - - VIO0_D13_PORT22_MARK, /* MSEL5CR_27_1 */ - VIO0_D14_PORT95_MARK, - VIO0_D15_PORT96_MARK, - - /* VIO1 */ - VIO1_D0_MARK, VIO1_D1_MARK, VIO1_D2_MARK, VIO1_D3_MARK, - VIO1_D4_MARK, VIO1_D5_MARK, VIO1_D6_MARK, VIO1_D7_MARK, - VIO1_VD_MARK, VIO1_HD_MARK, VIO1_CLK_MARK, VIO1_FIELD_MARK, - - /* TPU0 */ - TPU0TO0_MARK, TPU0TO1_MARK, TPU0TO3_MARK, - TPU0TO2_PORT66_MARK, /* TPU0TO2 Port 66/202 */ - TPU0TO2_PORT202_MARK, - - /* SSP1 0 */ - STP0_IPD0_MARK, STP0_IPD1_MARK, STP0_IPD2_MARK, STP0_IPD3_MARK, - STP0_IPD4_MARK, STP0_IPD5_MARK, STP0_IPD6_MARK, STP0_IPD7_MARK, - STP0_IPEN_MARK, STP0_IPCLK_MARK, STP0_IPSYNC_MARK, - - /* SSP1 1 */ - STP1_IPD1_MARK, STP1_IPD2_MARK, STP1_IPD3_MARK, STP1_IPD4_MARK, - STP1_IPD5_MARK, STP1_IPD6_MARK, STP1_IPD7_MARK, STP1_IPCLK_MARK, - STP1_IPSYNC_MARK, - - STP1_IPD0_PORT186_MARK, /* MSEL5CR_23_0 */ - STP1_IPEN_PORT187_MARK, - - STP1_IPD0_PORT194_MARK, /* MSEL5CR_23_1 */ - STP1_IPEN_PORT193_MARK, - - /* SIM */ - SIM_RST_MARK, SIM_CLK_MARK, - SIM_D_PORT22_MARK, /* SIM_D Port 22/199 */ - SIM_D_PORT199_MARK, - - /* SDHI0 */ - SDHI0_D0_MARK, SDHI0_D1_MARK, SDHI0_D2_MARK, SDHI0_D3_MARK, - SDHI0_CD_MARK, SDHI0_WP_MARK, SDHI0_CMD_MARK, SDHI0_CLK_MARK, - - /* SDHI1 */ - SDHI1_D0_MARK, SDHI1_D1_MARK, SDHI1_D2_MARK, SDHI1_D3_MARK, - SDHI1_CD_MARK, SDHI1_WP_MARK, SDHI1_CMD_MARK, SDHI1_CLK_MARK, - - /* SDHI2 */ - SDHI2_D0_MARK, SDHI2_D1_MARK, SDHI2_D2_MARK, SDHI2_D3_MARK, - SDHI2_CLK_MARK, SDHI2_CMD_MARK, - - SDHI2_CD_PORT24_MARK, /* MSEL5CR_19_0 */ - SDHI2_WP_PORT25_MARK, - - SDHI2_WP_PORT177_MARK, /* MSEL5CR_19_1 */ - SDHI2_CD_PORT202_MARK, - - /* MSIOF2 */ - MSIOF2_TXD_MARK, MSIOF2_RXD_MARK, MSIOF2_TSCK_MARK, - MSIOF2_SS2_MARK, MSIOF2_TSYNC_MARK, MSIOF2_SS1_MARK, - MSIOF2_MCK1_MARK, MSIOF2_MCK0_MARK, MSIOF2_RSYNC_MARK, - MSIOF2_RSCK_MARK, - - /* KEYSC */ - KEYIN4_MARK, KEYIN5_MARK, KEYIN6_MARK, KEYIN7_MARK, - KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK, - KEYOUT4_MARK, KEYOUT5_MARK, KEYOUT6_MARK, KEYOUT7_MARK, - - KEYIN0_PORT43_MARK, /* MSEL4CR_18_0 */ - KEYIN1_PORT44_MARK, - KEYIN2_PORT45_MARK, - KEYIN3_PORT46_MARK, - - KEYIN0_PORT58_MARK, /* MSEL4CR_18_1 */ - KEYIN1_PORT57_MARK, - KEYIN2_PORT56_MARK, - KEYIN3_PORT55_MARK, - - /* VOU */ - DV_D0_MARK, DV_D1_MARK, DV_D2_MARK, DV_D3_MARK, - DV_D4_MARK, DV_D5_MARK, DV_D6_MARK, DV_D7_MARK, - DV_D8_MARK, DV_D9_MARK, DV_D10_MARK, DV_D11_MARK, - DV_D12_MARK, DV_D13_MARK, DV_D14_MARK, DV_D15_MARK, - DV_CLK_MARK, DV_VSYNC_MARK, DV_HSYNC_MARK, - - /* MEMC */ - MEMC_AD0_MARK, MEMC_AD1_MARK, MEMC_AD2_MARK, MEMC_AD3_MARK, - MEMC_AD4_MARK, MEMC_AD5_MARK, MEMC_AD6_MARK, MEMC_AD7_MARK, - MEMC_AD8_MARK, MEMC_AD9_MARK, MEMC_AD10_MARK, MEMC_AD11_MARK, - MEMC_AD12_MARK, MEMC_AD13_MARK, MEMC_AD14_MARK, MEMC_AD15_MARK, - MEMC_CS0_MARK, MEMC_INT_MARK, MEMC_NWE_MARK, MEMC_NOE_MARK, - - MEMC_CS1_MARK, /* MSEL4CR_6_0 */ - MEMC_ADV_MARK, - MEMC_WAIT_MARK, - MEMC_BUSCLK_MARK, - - MEMC_A1_MARK, /* MSEL4CR_6_1 */ - MEMC_DREQ0_MARK, - MEMC_DREQ1_MARK, - MEMC_A0_MARK, - - /* MMC */ - MMC0_D0_PORT68_MARK, MMC0_D1_PORT69_MARK, MMC0_D2_PORT70_MARK, - MMC0_D3_PORT71_MARK, MMC0_D4_PORT72_MARK, MMC0_D5_PORT73_MARK, - MMC0_D6_PORT74_MARK, MMC0_D7_PORT75_MARK, MMC0_CLK_PORT66_MARK, - MMC0_CMD_PORT67_MARK, /* MSEL4CR_15_0 */ - - MMC1_D0_PORT149_MARK, MMC1_D1_PORT148_MARK, MMC1_D2_PORT147_MARK, - MMC1_D3_PORT146_MARK, MMC1_D4_PORT145_MARK, MMC1_D5_PORT144_MARK, - MMC1_D6_PORT143_MARK, MMC1_D7_PORT142_MARK, MMC1_CLK_PORT103_MARK, - MMC1_CMD_PORT104_MARK, /* MSEL4CR_15_1 */ - - /* MSIOF0 */ - MSIOF0_SS1_MARK, MSIOF0_SS2_MARK, MSIOF0_RXD_MARK, - MSIOF0_TXD_MARK, MSIOF0_MCK0_MARK, MSIOF0_MCK1_MARK, - MSIOF0_RSYNC_MARK, MSIOF0_RSCK_MARK, MSIOF0_TSCK_MARK, - MSIOF0_TSYNC_MARK, - - /* MSIOF1 */ - MSIOF1_RSCK_MARK, MSIOF1_RSYNC_MARK, - MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK, - - MSIOF1_SS2_PORT116_MARK, MSIOF1_SS1_PORT117_MARK, - MSIOF1_RXD_PORT118_MARK, MSIOF1_TXD_PORT119_MARK, - MSIOF1_TSYNC_PORT120_MARK, - MSIOF1_TSCK_PORT121_MARK, /* MSEL4CR_10_0 */ - - MSIOF1_SS1_PORT67_MARK, MSIOF1_TSCK_PORT72_MARK, - MSIOF1_TSYNC_PORT73_MARK, MSIOF1_TXD_PORT74_MARK, - MSIOF1_RXD_PORT75_MARK, - MSIOF1_SS2_PORT202_MARK, /* MSEL4CR_10_1 */ - - /* GPIO */ - GPO0_MARK, GPI0_MARK, GPO1_MARK, GPI1_MARK, - - /* USB0 */ - USB0_OCI_MARK, USB0_PPON_MARK, VBUS_MARK, - - /* USB1 */ - USB1_OCI_MARK, USB1_PPON_MARK, - - /* BBIF1 */ - BBIF1_RXD_MARK, BBIF1_TXD_MARK, BBIF1_TSYNC_MARK, - BBIF1_TSCK_MARK, BBIF1_RSCK_MARK, BBIF1_RSYNC_MARK, - BBIF1_FLOW_MARK, BBIF1_RX_FLOW_N_MARK, - - /* BBIF2 */ - BBIF2_TXD2_PORT5_MARK, /* MSEL5CR_0_0 */ - BBIF2_RXD2_PORT60_MARK, - BBIF2_TSYNC2_PORT6_MARK, - BBIF2_TSCK2_PORT59_MARK, - - BBIF2_RXD2_PORT90_MARK, /* MSEL5CR_0_1 */ - BBIF2_TXD2_PORT183_MARK, - BBIF2_TSCK2_PORT89_MARK, - BBIF2_TSYNC2_PORT184_MARK, - - /* BSC / FLCTL / PCMCIA */ - CS0_MARK, CS2_MARK, CS4_MARK, - CS5B_MARK, CS6A_MARK, - CS5A_PORT105_MARK, /* CS5A PORT 19/105 */ - CS5A_PORT19_MARK, - IOIS16_MARK, /* ? */ - - A0_MARK, A1_MARK, A2_MARK, A3_MARK, - A4_FOE_MARK, /* share with FLCTL */ - A5_FCDE_MARK, /* share with FLCTL */ - A6_MARK, A7_MARK, A8_MARK, A9_MARK, - A10_MARK, A11_MARK, A12_MARK, A13_MARK, - A14_MARK, A15_MARK, A16_MARK, A17_MARK, - A18_MARK, A19_MARK, A20_MARK, A21_MARK, - A22_MARK, A23_MARK, A24_MARK, A25_MARK, - A26_MARK, - - D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, /* share with FLCTL */ - D3_NAF3_MARK, D4_NAF4_MARK, D5_NAF5_MARK, /* share with FLCTL */ - D6_NAF6_MARK, D7_NAF7_MARK, D8_NAF8_MARK, /* share with FLCTL */ - D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK, /* share with FLCTL */ - D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, /* share with FLCTL */ - D15_NAF15_MARK, /* share with FLCTL */ - D16_MARK, D17_MARK, D18_MARK, D19_MARK, - D20_MARK, D21_MARK, D22_MARK, D23_MARK, - D24_MARK, D25_MARK, D26_MARK, D27_MARK, - D28_MARK, D29_MARK, D30_MARK, D31_MARK, - - WE0_FWE_MARK, /* share with FLCTL */ - WE1_MARK, - WE2_ICIORD_MARK, /* share with PCMCIA */ - WE3_ICIOWR_MARK, /* share with PCMCIA */ - CKO_MARK, BS_MARK, RDWR_MARK, - RD_FSC_MARK, /* share with FLCTL */ - WAIT_PORT177_MARK, /* WAIT Port 90/177 */ - WAIT_PORT90_MARK, - - FCE0_MARK, FCE1_MARK, FRB_MARK, /* FLCTL */ - - /* IRDA */ - IRDA_FIRSEL_MARK, IRDA_IN_MARK, IRDA_OUT_MARK, - - /* ATAPI */ - IDE_D0_MARK, IDE_D1_MARK, IDE_D2_MARK, IDE_D3_MARK, - IDE_D4_MARK, IDE_D5_MARK, IDE_D6_MARK, IDE_D7_MARK, - IDE_D8_MARK, IDE_D9_MARK, IDE_D10_MARK, IDE_D11_MARK, - IDE_D12_MARK, IDE_D13_MARK, IDE_D14_MARK, IDE_D15_MARK, - IDE_A0_MARK, IDE_A1_MARK, IDE_A2_MARK, IDE_CS0_MARK, - IDE_CS1_MARK, IDE_IOWR_MARK, IDE_IORD_MARK, IDE_IORDY_MARK, - IDE_INT_MARK, IDE_RST_MARK, IDE_DIRECTION_MARK, - IDE_EXBUF_ENB_MARK, IDE_IODACK_MARK, IDE_IODREQ_MARK, - - /* RMII */ - RMII_CRS_DV_MARK, RMII_RX_ER_MARK, RMII_RXD0_MARK, - RMII_RXD1_MARK, RMII_TX_EN_MARK, RMII_TXD0_MARK, - RMII_MDC_MARK, RMII_TXD1_MARK, RMII_MDIO_MARK, - RMII_REF50CK_MARK, /* for RMII */ - RMII_REF125CK_MARK, /* for GMII */ - - /* GEther */ - ET_TX_CLK_MARK, ET_TX_EN_MARK, ET_ETXD0_MARK, ET_ETXD1_MARK, - ET_ETXD2_MARK, ET_ETXD3_MARK, - ET_ETXD4_MARK, ET_ETXD5_MARK, /* for GEther */ - ET_ETXD6_MARK, ET_ETXD7_MARK, /* for GEther */ - ET_COL_MARK, ET_TX_ER_MARK, ET_RX_CLK_MARK, ET_RX_DV_MARK, - ET_ERXD0_MARK, ET_ERXD1_MARK, ET_ERXD2_MARK, ET_ERXD3_MARK, - ET_ERXD4_MARK, ET_ERXD5_MARK, /* for GEther */ - ET_ERXD6_MARK, ET_ERXD7_MARK, /* for GEther */ - ET_RX_ER_MARK, ET_CRS_MARK, ET_MDC_MARK, ET_MDIO_MARK, - ET_LINK_MARK, ET_PHY_INT_MARK, ET_WOL_MARK, ET_GTX_CLK_MARK, - - /* DMA0 */ - DREQ0_MARK, DACK0_MARK, - - /* DMA1 */ - DREQ1_MARK, DACK1_MARK, - - /* SYSC */ - RESETOUTS_MARK, RESETP_PULLUP_MARK, RESETP_PLAIN_MARK, - - /* IRREM */ - IROUT_MARK, - - /* SDENC */ - SDENC_CPG_MARK, SDENC_DV_CLKI_MARK, - - /* HDMI */ - HDMI_HPD_MARK, HDMI_CEC_MARK, - - /* DEBUG */ - EDEBGREQ_PULLUP_MARK, /* for JTAG */ - EDEBGREQ_PULLDOWN_MARK, - - TRACEAUD_FROM_VIO_MARK, /* for TRACE/AUD */ - TRACEAUD_FROM_LCDC0_MARK, - TRACEAUD_FROM_MEMC_MARK, - - PINMUX_MARK_END, -}; - -static pinmux_enum_t pinmux_data[] = { - /* specify valid pin states for each pin in GPIO mode */ - - /* I/O and Pull U/D */ - PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1), - PORT_DATA_IO_PD(2), PORT_DATA_IO_PD(3), - PORT_DATA_IO_PD(4), PORT_DATA_IO_PD(5), - PORT_DATA_IO_PD(6), PORT_DATA_IO(7), - PORT_DATA_IO(8), PORT_DATA_IO(9), - - PORT_DATA_IO_PD(10), PORT_DATA_IO_PD(11), - PORT_DATA_IO_PD(12), PORT_DATA_IO_PU_PD(13), - PORT_DATA_IO_PD(14), PORT_DATA_IO_PD(15), - PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17), - PORT_DATA_IO(18), PORT_DATA_IO_PU(19), - - PORT_DATA_IO_PU_PD(20), PORT_DATA_IO_PD(21), - PORT_DATA_IO_PU_PD(22), PORT_DATA_IO(23), - PORT_DATA_IO_PU(24), PORT_DATA_IO_PU(25), - PORT_DATA_IO_PU(26), PORT_DATA_IO_PU(27), - PORT_DATA_IO_PU(28), PORT_DATA_IO_PU(29), - - PORT_DATA_IO_PU(30), PORT_DATA_IO_PD(31), - PORT_DATA_IO_PD(32), PORT_DATA_IO_PD(33), - PORT_DATA_IO_PD(34), PORT_DATA_IO_PU(35), - PORT_DATA_IO_PU(36), PORT_DATA_IO_PD(37), - PORT_DATA_IO_PU(38), PORT_DATA_IO_PD(39), - - PORT_DATA_IO_PU_PD(40), PORT_DATA_IO_PD(41), - PORT_DATA_IO_PD(42), PORT_DATA_IO_PU_PD(43), - PORT_DATA_IO_PU_PD(44), PORT_DATA_IO_PU_PD(45), - PORT_DATA_IO_PU_PD(46), PORT_DATA_IO_PU_PD(47), - PORT_DATA_IO_PU_PD(48), PORT_DATA_IO_PU_PD(49), - - PORT_DATA_IO_PU_PD(50), PORT_DATA_IO_PD(51), - PORT_DATA_IO_PD(52), PORT_DATA_IO_PD(53), - PORT_DATA_IO_PD(54), PORT_DATA_IO_PU_PD(55), - PORT_DATA_IO_PU_PD(56), PORT_DATA_IO_PU_PD(57), - PORT_DATA_IO_PU_PD(58), PORT_DATA_IO_PU_PD(59), - - PORT_DATA_IO_PU_PD(60), PORT_DATA_IO_PD(61), - PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63), - PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65), - PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67), - PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69), - - PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71), - PORT_DATA_IO_PU_PD(72), PORT_DATA_IO_PU_PD(73), - PORT_DATA_IO_PU_PD(74), PORT_DATA_IO_PU_PD(75), - PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77), - PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79), - - PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81), - PORT_DATA_IO(82), PORT_DATA_IO_PU_PD(83), - PORT_DATA_IO(84), PORT_DATA_IO_PD(85), - PORT_DATA_IO_PD(86), PORT_DATA_IO_PD(87), - PORT_DATA_IO_PD(88), PORT_DATA_IO_PD(89), - - PORT_DATA_IO_PD(90), PORT_DATA_IO_PU_PD(91), - PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93), - PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95), - PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), - PORT_DATA_IO_PU_PD(98), PORT_DATA_IO_PU_PD(99), - - PORT_DATA_IO_PU_PD(100), PORT_DATA_IO(101), - PORT_DATA_IO_PU(102), PORT_DATA_IO_PU_PD(103), - PORT_DATA_IO_PU(104), PORT_DATA_IO_PU(105), - PORT_DATA_IO_PU_PD(106), PORT_DATA_IO(107), - PORT_DATA_IO(108), PORT_DATA_IO(109), - - PORT_DATA_IO(110), PORT_DATA_IO(111), - PORT_DATA_IO(112), PORT_DATA_IO(113), - PORT_DATA_IO_PU_PD(114), PORT_DATA_IO(115), - PORT_DATA_IO_PD(116), PORT_DATA_IO_PD(117), - PORT_DATA_IO_PD(118), PORT_DATA_IO_PD(119), - - PORT_DATA_IO_PD(120), PORT_DATA_IO_PD(121), - PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123), - PORT_DATA_IO_PD(124), PORT_DATA_IO(125), - PORT_DATA_IO(126), PORT_DATA_IO(127), - PORT_DATA_IO(128), PORT_DATA_IO(129), - - PORT_DATA_IO(130), PORT_DATA_IO(131), - PORT_DATA_IO(132), PORT_DATA_IO(133), - PORT_DATA_IO(134), PORT_DATA_IO(135), - PORT_DATA_IO(136), PORT_DATA_IO(137), - PORT_DATA_IO(138), PORT_DATA_IO(139), - - PORT_DATA_IO(140), PORT_DATA_IO(141), - PORT_DATA_IO_PU(142), PORT_DATA_IO_PU(143), - PORT_DATA_IO_PU(144), PORT_DATA_IO_PU(145), - PORT_DATA_IO_PU(146), PORT_DATA_IO_PU(147), - PORT_DATA_IO_PU(148), PORT_DATA_IO_PU(149), - - PORT_DATA_IO_PU(150), PORT_DATA_IO_PU(151), - PORT_DATA_IO_PU(152), PORT_DATA_IO_PU(153), - PORT_DATA_IO_PU(154), PORT_DATA_IO_PU(155), - PORT_DATA_IO_PU(156), PORT_DATA_IO_PU(157), - PORT_DATA_IO_PD(158), PORT_DATA_IO_PD(159), - - PORT_DATA_IO_PU_PD(160), PORT_DATA_IO_PD(161), - PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), - PORT_DATA_IO_PD(164), PORT_DATA_IO_PD(165), - PORT_DATA_IO_PU(166), PORT_DATA_IO_PU(167), - PORT_DATA_IO_PU(168), PORT_DATA_IO_PU(169), - - PORT_DATA_IO_PU(170), PORT_DATA_IO_PU(171), - PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173), - PORT_DATA_IO_PD(174), PORT_DATA_IO_PD(175), - PORT_DATA_IO_PU(176), PORT_DATA_IO_PU_PD(177), - PORT_DATA_IO_PU(178), PORT_DATA_IO_PD(179), - - PORT_DATA_IO_PD(180), PORT_DATA_IO_PU(181), - PORT_DATA_IO_PU(182), PORT_DATA_IO(183), - PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), - PORT_DATA_IO_PD(186), PORT_DATA_IO_PD(187), - PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189), - - PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), - PORT_DATA_IO_PD(192), PORT_DATA_IO_PU_PD(193), - PORT_DATA_IO_PU_PD(194), PORT_DATA_IO_PD(195), - PORT_DATA_IO_PU_PD(196), PORT_DATA_IO_PD(197), - PORT_DATA_IO_PU_PD(198), PORT_DATA_IO_PU_PD(199), - - PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU(201), - PORT_DATA_IO_PU_PD(202), PORT_DATA_IO(203), - PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205), - PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PU_PD(207), - PORT_DATA_IO_PU_PD(208), PORT_DATA_IO_PD(209), - - PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), - - /* Port0 */ - PINMUX_DATA(DBGMDT2_MARK, PORT0_FN1), - PINMUX_DATA(FSIAISLD_PORT0_MARK, PORT0_FN2, MSEL5CR_3_0), - PINMUX_DATA(FSIAOSLD1_MARK, PORT0_FN3), - PINMUX_DATA(LCD0_D22_PORT0_MARK, PORT0_FN4, MSEL5CR_6_0), - PINMUX_DATA(SCIFA7_RXD_MARK, PORT0_FN6), - PINMUX_DATA(LCD1_D4_MARK, PORT0_FN7), - PINMUX_DATA(IRQ5_PORT0_MARK, PORT0_FN0, MSEL1CR_5_0), - - /* Port1 */ - PINMUX_DATA(DBGMDT1_MARK, PORT1_FN1), - PINMUX_DATA(FMSISLD_PORT1_MARK, PORT1_FN2, MSEL5CR_5_0), - PINMUX_DATA(FSIAOSLD2_MARK, PORT1_FN3), - PINMUX_DATA(LCD0_D23_PORT1_MARK, PORT1_FN4, MSEL5CR_6_0), - PINMUX_DATA(SCIFA7_TXD_MARK, PORT1_FN6), - PINMUX_DATA(LCD1_D3_MARK, PORT1_FN7), - PINMUX_DATA(IRQ5_PORT1_MARK, PORT1_FN0, MSEL1CR_5_1), - - /* Port2 */ - PINMUX_DATA(DBGMDT0_MARK, PORT2_FN1), - PINMUX_DATA(SCIFB_SCK_PORT2_MARK, PORT2_FN2, MSEL5CR_17_1), - PINMUX_DATA(LCD0_D21_PORT2_MARK, PORT2_FN4, MSEL5CR_6_0), - PINMUX_DATA(LCD1_D2_MARK, PORT2_FN7), - PINMUX_DATA(IRQ0_PORT2_MARK, PORT2_FN0, MSEL1CR_0_1), - - /* Port3 */ - PINMUX_DATA(DBGMD21_MARK, PORT3_FN1), - PINMUX_DATA(SCIFB_RXD_PORT3_MARK, PORT3_FN2, MSEL5CR_17_1), - PINMUX_DATA(LCD0_D20_PORT3_MARK, PORT3_FN4, MSEL5CR_6_0), - PINMUX_DATA(LCD1_D1_MARK, PORT3_FN7), - - /* Port4 */ - PINMUX_DATA(DBGMD20_MARK, PORT4_FN1), - PINMUX_DATA(SCIFB_TXD_PORT4_MARK, PORT4_FN2, MSEL5CR_17_1), - PINMUX_DATA(LCD0_D19_PORT4_MARK, PORT4_FN4, MSEL5CR_6_0), - PINMUX_DATA(LCD1_D0_MARK, PORT4_FN7), - - /* Port5 */ - PINMUX_DATA(DBGMD11_MARK, PORT5_FN1), - PINMUX_DATA(BBIF2_TXD2_PORT5_MARK, PORT5_FN2, MSEL5CR_0_0), - PINMUX_DATA(FSIAISLD_PORT5_MARK, PORT5_FN4, MSEL5CR_3_1), - PINMUX_DATA(RSPI_SSL0_A_MARK, PORT5_FN6), - PINMUX_DATA(LCD1_VCPWC_MARK, PORT5_FN7), - - /* Port6 */ - PINMUX_DATA(DBGMD10_MARK, PORT6_FN1), - PINMUX_DATA(BBIF2_TSYNC2_PORT6_MARK, PORT6_FN2, MSEL5CR_0_0), - PINMUX_DATA(FMSISLD_PORT6_MARK, PORT6_FN4, MSEL5CR_5_1), - PINMUX_DATA(RSPI_SSL1_A_MARK, PORT6_FN6), - PINMUX_DATA(LCD1_VEPWC_MARK, PORT6_FN7), - - /* Port7 */ - PINMUX_DATA(FSIAOLR_MARK, PORT7_FN1), - - /* Port8 */ - PINMUX_DATA(FSIAOBT_MARK, PORT8_FN1), - - /* Port9 */ - PINMUX_DATA(FSIAOSLD_MARK, PORT9_FN1), - PINMUX_DATA(FSIASPDIF_PORT9_MARK, PORT9_FN2, MSEL5CR_4_0), - - /* Port10 */ - PINMUX_DATA(FSIAOMC_MARK, PORT10_FN1), - PINMUX_DATA(SCIFA5_RXD_PORT10_MARK, PORT10_FN3, MSEL5CR_14_0, MSEL5CR_15_0), - PINMUX_DATA(IRQ3_PORT10_MARK, PORT10_FN0, MSEL1CR_3_0), - - /* Port11 */ - PINMUX_DATA(FSIACK_MARK, PORT11_FN1), - PINMUX_DATA(FSIBCK_MARK, PORT11_FN2), - PINMUX_DATA(IRQ2_PORT11_MARK, PORT11_FN0, MSEL1CR_2_0), - - /* Port12 */ - PINMUX_DATA(FSIAILR_MARK, PORT12_FN1), - PINMUX_DATA(SCIFA4_RXD_PORT12_MARK, PORT12_FN2, MSEL5CR_12_0, MSEL5CR_11_0), - PINMUX_DATA(LCD1_RS_MARK, PORT12_FN6), - PINMUX_DATA(LCD1_DISP_MARK, PORT12_FN7), - PINMUX_DATA(IRQ2_PORT12_MARK, PORT12_FN0, MSEL1CR_2_1), - - /* Port13 */ - PINMUX_DATA(FSIAIBT_MARK, PORT13_FN1), - PINMUX_DATA(SCIFA4_TXD_PORT13_MARK, PORT13_FN2, MSEL5CR_12_0, MSEL5CR_11_0), - PINMUX_DATA(LCD1_RD_MARK, PORT13_FN7), - PINMUX_DATA(IRQ0_PORT13_MARK, PORT13_FN0, MSEL1CR_0_0), - - /* Port14 */ - PINMUX_DATA(FMSOILR_MARK, PORT14_FN1), - PINMUX_DATA(FMSIILR_MARK, PORT14_FN2), - PINMUX_DATA(VIO_CKO1_MARK, PORT14_FN3), - PINMUX_DATA(LCD1_D23_MARK, PORT14_FN7), - PINMUX_DATA(IRQ3_PORT14_MARK, PORT14_FN0, MSEL1CR_3_1), - - /* Port15 */ - PINMUX_DATA(FMSOIBT_MARK, PORT15_FN1), - PINMUX_DATA(FMSIIBT_MARK, PORT15_FN2), - PINMUX_DATA(VIO_CKO2_MARK, PORT15_FN3), - PINMUX_DATA(LCD1_D22_MARK, PORT15_FN7), - PINMUX_DATA(IRQ4_PORT15_MARK, PORT15_FN0, MSEL1CR_4_0), - - /* Port16 */ - PINMUX_DATA(FMSOOLR_MARK, PORT16_FN1), - PINMUX_DATA(FMSIOLR_MARK, PORT16_FN2), - - /* Port17 */ - PINMUX_DATA(FMSOOBT_MARK, PORT17_FN1), - PINMUX_DATA(FMSIOBT_MARK, PORT17_FN2), - - /* Port18 */ - PINMUX_DATA(FMSOSLD_MARK, PORT18_FN1), - PINMUX_DATA(FSIASPDIF_PORT18_MARK, PORT18_FN2, MSEL5CR_4_1), - - /* Port19 */ - PINMUX_DATA(FMSICK_MARK, PORT19_FN1), - PINMUX_DATA(CS5A_PORT19_MARK, PORT19_FN7, MSEL5CR_2_1), - PINMUX_DATA(IRQ10_MARK, PORT19_FN0), - - /* Port20 */ - PINMUX_DATA(FMSOCK_MARK, PORT20_FN1), - PINMUX_DATA(SCIFA5_TXD_PORT20_MARK, PORT20_FN3, MSEL5CR_15_0, MSEL5CR_14_0), - PINMUX_DATA(IRQ1_MARK, PORT20_FN0), - - /* Port21 */ - PINMUX_DATA(SCIFA1_CTS_MARK, PORT21_FN1), - PINMUX_DATA(SCIFA4_SCK_PORT21_MARK, PORT21_FN2, MSEL5CR_10_0), - PINMUX_DATA(TPU0TO1_MARK, PORT21_FN4), - PINMUX_DATA(VIO1_FIELD_MARK, PORT21_FN5), - PINMUX_DATA(STP0_IPD5_MARK, PORT21_FN6), - PINMUX_DATA(LCD1_D10_MARK, PORT21_FN7), - - /* Port22 */ - PINMUX_DATA(SCIFA2_SCK_PORT22_MARK, PORT22_FN1, MSEL5CR_7_0), - PINMUX_DATA(SIM_D_PORT22_MARK, PORT22_FN4, MSEL5CR_21_0), - PINMUX_DATA(VIO0_D13_PORT22_MARK, PORT22_FN7, MSEL5CR_27_1), - - /* Port23 */ - PINMUX_DATA(SCIFA1_RTS_MARK, PORT23_FN1), - PINMUX_DATA(SCIFA5_SCK_PORT23_MARK, PORT23_FN3, MSEL5CR_13_0), - PINMUX_DATA(TPU0TO0_MARK, PORT23_FN4), - PINMUX_DATA(VIO_CKO_1_MARK, PORT23_FN5), - PINMUX_DATA(STP0_IPD2_MARK, PORT23_FN6), - PINMUX_DATA(LCD1_D7_MARK, PORT23_FN7), - - /* Port24 */ - PINMUX_DATA(VIO0_D15_PORT24_MARK, PORT24_FN1, MSEL5CR_27_0), - PINMUX_DATA(VIO1_D7_MARK, PORT24_FN5), - PINMUX_DATA(SCIFA6_SCK_MARK, PORT24_FN6), - PINMUX_DATA(SDHI2_CD_PORT24_MARK, PORT24_FN7, MSEL5CR_19_0), - - /* Port25 */ - PINMUX_DATA(VIO0_D14_PORT25_MARK, PORT25_FN1, MSEL5CR_27_0), - PINMUX_DATA(VIO1_D6_MARK, PORT25_FN5), - PINMUX_DATA(SCIFA6_RXD_MARK, PORT25_FN6), - PINMUX_DATA(SDHI2_WP_PORT25_MARK, PORT25_FN7, MSEL5CR_19_0), - - /* Port26 */ - PINMUX_DATA(VIO0_D13_PORT26_MARK, PORT26_FN1, MSEL5CR_27_0), - PINMUX_DATA(VIO1_D5_MARK, PORT26_FN5), - PINMUX_DATA(SCIFA6_TXD_MARK, PORT26_FN6), - - /* Port27 - Port39 Function */ - PINMUX_DATA(VIO0_D7_MARK, PORT27_FN1), - PINMUX_DATA(VIO0_D6_MARK, PORT28_FN1), - PINMUX_DATA(VIO0_D5_MARK, PORT29_FN1), - PINMUX_DATA(VIO0_D4_MARK, PORT30_FN1), - PINMUX_DATA(VIO0_D3_MARK, PORT31_FN1), - PINMUX_DATA(VIO0_D2_MARK, PORT32_FN1), - PINMUX_DATA(VIO0_D1_MARK, PORT33_FN1), - PINMUX_DATA(VIO0_D0_MARK, PORT34_FN1), - PINMUX_DATA(VIO0_CLK_MARK, PORT35_FN1), - PINMUX_DATA(VIO_CKO_MARK, PORT36_FN1), - PINMUX_DATA(VIO0_HD_MARK, PORT37_FN1), - PINMUX_DATA(VIO0_FIELD_MARK, PORT38_FN1), - PINMUX_DATA(VIO0_VD_MARK, PORT39_FN1), - - /* Port38 IRQ */ - PINMUX_DATA(IRQ25_MARK, PORT38_FN0), - - /* Port40 */ - PINMUX_DATA(LCD0_D18_PORT40_MARK, PORT40_FN4, MSEL5CR_6_0), - PINMUX_DATA(RSPI_CK_A_MARK, PORT40_FN6), - PINMUX_DATA(LCD1_LCLK_MARK, PORT40_FN7), - - /* Port41 */ - PINMUX_DATA(LCD0_D17_MARK, PORT41_FN1), - PINMUX_DATA(MSIOF2_SS1_MARK, PORT41_FN2), - PINMUX_DATA(IRQ31_PORT41_MARK, PORT41_FN0, MSEL1CR_31_1), - - /* Port42 */ - PINMUX_DATA(LCD0_D16_MARK, PORT42_FN1), - PINMUX_DATA(MSIOF2_MCK1_MARK, PORT42_FN2), - PINMUX_DATA(IRQ12_PORT42_MARK, PORT42_FN0, MSEL1CR_12_1), - - /* Port43 */ - PINMUX_DATA(LCD0_D15_MARK, PORT43_FN1), - PINMUX_DATA(MSIOF2_MCK0_MARK, PORT43_FN2), - PINMUX_DATA(KEYIN0_PORT43_MARK, PORT43_FN3, MSEL4CR_18_0), - PINMUX_DATA(DV_D15_MARK, PORT43_FN6), - - /* Port44 */ - PINMUX_DATA(LCD0_D14_MARK, PORT44_FN1), - PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT44_FN2), - PINMUX_DATA(KEYIN1_PORT44_MARK, PORT44_FN3, MSEL4CR_18_0), - PINMUX_DATA(DV_D14_MARK, PORT44_FN6), - - /* Port45 */ - PINMUX_DATA(LCD0_D13_MARK, PORT45_FN1), - PINMUX_DATA(MSIOF2_RSCK_MARK, PORT45_FN2), - PINMUX_DATA(KEYIN2_PORT45_MARK, PORT45_FN3, MSEL4CR_18_0), - PINMUX_DATA(DV_D13_MARK, PORT45_FN6), - - /* Port46 */ - PINMUX_DATA(LCD0_D12_MARK, PORT46_FN1), - PINMUX_DATA(KEYIN3_PORT46_MARK, PORT46_FN3, MSEL4CR_18_0), - PINMUX_DATA(DV_D12_MARK, PORT46_FN6), - - /* Port47 */ - PINMUX_DATA(LCD0_D11_MARK, PORT47_FN1), - PINMUX_DATA(KEYIN4_MARK, PORT47_FN3), - PINMUX_DATA(DV_D11_MARK, PORT47_FN6), - - /* Port48 */ - PINMUX_DATA(LCD0_D10_MARK, PORT48_FN1), - PINMUX_DATA(KEYIN5_MARK, PORT48_FN3), - PINMUX_DATA(DV_D10_MARK, PORT48_FN6), - - /* Port49 */ - PINMUX_DATA(LCD0_D9_MARK, PORT49_FN1), - PINMUX_DATA(KEYIN6_MARK, PORT49_FN3), - PINMUX_DATA(DV_D9_MARK, PORT49_FN6), - PINMUX_DATA(IRQ30_PORT49_MARK, PORT49_FN0, MSEL1CR_30_1), - - /* Port50 */ - PINMUX_DATA(LCD0_D8_MARK, PORT50_FN1), - PINMUX_DATA(KEYIN7_MARK, PORT50_FN3), - PINMUX_DATA(DV_D8_MARK, PORT50_FN6), - PINMUX_DATA(IRQ29_PORT50_MARK, PORT50_FN0, MSEL1CR_29_1), - - /* Port51 */ - PINMUX_DATA(LCD0_D7_MARK, PORT51_FN1), - PINMUX_DATA(KEYOUT0_MARK, PORT51_FN3), - PINMUX_DATA(DV_D7_MARK, PORT51_FN6), - - /* Port52 */ - PINMUX_DATA(LCD0_D6_MARK, PORT52_FN1), - PINMUX_DATA(KEYOUT1_MARK, PORT52_FN3), - PINMUX_DATA(DV_D6_MARK, PORT52_FN6), - - /* Port53 */ - PINMUX_DATA(LCD0_D5_MARK, PORT53_FN1), - PINMUX_DATA(KEYOUT2_MARK, PORT53_FN3), - PINMUX_DATA(DV_D5_MARK, PORT53_FN6), - - /* Port54 */ - PINMUX_DATA(LCD0_D4_MARK, PORT54_FN1), - PINMUX_DATA(KEYOUT3_MARK, PORT54_FN3), - PINMUX_DATA(DV_D4_MARK, PORT54_FN6), - - /* Port55 */ - PINMUX_DATA(LCD0_D3_MARK, PORT55_FN1), - PINMUX_DATA(KEYOUT4_MARK, PORT55_FN3), - PINMUX_DATA(KEYIN3_PORT55_MARK, PORT55_FN4, MSEL4CR_18_1), - PINMUX_DATA(DV_D3_MARK, PORT55_FN6), - - /* Port56 */ - PINMUX_DATA(LCD0_D2_MARK, PORT56_FN1), - PINMUX_DATA(KEYOUT5_MARK, PORT56_FN3), - PINMUX_DATA(KEYIN2_PORT56_MARK, PORT56_FN4, MSEL4CR_18_1), - PINMUX_DATA(DV_D2_MARK, PORT56_FN6), - PINMUX_DATA(IRQ28_PORT56_MARK, PORT56_FN0, MSEL1CR_28_1), - - /* Port57 */ - PINMUX_DATA(LCD0_D1_MARK, PORT57_FN1), - PINMUX_DATA(KEYOUT6_MARK, PORT57_FN3), - PINMUX_DATA(KEYIN1_PORT57_MARK, PORT57_FN4, MSEL4CR_18_1), - PINMUX_DATA(DV_D1_MARK, PORT57_FN6), - PINMUX_DATA(IRQ27_PORT57_MARK, PORT57_FN0, MSEL1CR_27_1), - - /* Port58 */ - PINMUX_DATA(LCD0_D0_MARK, PORT58_FN1), - PINMUX_DATA(KEYOUT7_MARK, PORT58_FN3), - PINMUX_DATA(KEYIN0_PORT58_MARK, PORT58_FN4, MSEL4CR_18_1), - PINMUX_DATA(DV_D0_MARK, PORT58_FN6), - PINMUX_DATA(IRQ26_PORT58_MARK, PORT58_FN0, MSEL1CR_26_1), - - /* Port59 */ - PINMUX_DATA(LCD0_VCPWC_MARK, PORT59_FN1), - PINMUX_DATA(BBIF2_TSCK2_PORT59_MARK, PORT59_FN2, MSEL5CR_0_0), - PINMUX_DATA(RSPI_MOSI_A_MARK, PORT59_FN6), - - /* Port60 */ - PINMUX_DATA(LCD0_VEPWC_MARK, PORT60_FN1), - PINMUX_DATA(BBIF2_RXD2_PORT60_MARK, PORT60_FN2, MSEL5CR_0_0), - PINMUX_DATA(RSPI_MISO_A_MARK, PORT60_FN6), - - /* Port61 */ - PINMUX_DATA(LCD0_DON_MARK, PORT61_FN1), - PINMUX_DATA(MSIOF2_TXD_MARK, PORT61_FN2), - - /* Port62 */ - PINMUX_DATA(LCD0_DCK_MARK, PORT62_FN1), - PINMUX_DATA(LCD0_WR_MARK, PORT62_FN4), - PINMUX_DATA(DV_CLK_MARK, PORT62_FN6), - PINMUX_DATA(IRQ15_PORT62_MARK, PORT62_FN0, MSEL1CR_15_1), - - /* Port63 */ - PINMUX_DATA(LCD0_VSYN_MARK, PORT63_FN1), - PINMUX_DATA(DV_VSYNC_MARK, PORT63_FN6), - PINMUX_DATA(IRQ14_PORT63_MARK, PORT63_FN0, MSEL1CR_14_1), - - /* Port64 */ - PINMUX_DATA(LCD0_HSYN_MARK, PORT64_FN1), - PINMUX_DATA(LCD0_CS_MARK, PORT64_FN4), - PINMUX_DATA(DV_HSYNC_MARK, PORT64_FN6), - PINMUX_DATA(IRQ13_PORT64_MARK, PORT64_FN0, MSEL1CR_13_1), - - /* Port65 */ - PINMUX_DATA(LCD0_DISP_MARK, PORT65_FN1), - PINMUX_DATA(MSIOF2_TSCK_MARK, PORT65_FN2), - PINMUX_DATA(LCD0_RS_MARK, PORT65_FN4), - - /* Port66 */ - PINMUX_DATA(MEMC_INT_MARK, PORT66_FN1), - PINMUX_DATA(TPU0TO2_PORT66_MARK, PORT66_FN3, MSEL5CR_25_0), - PINMUX_DATA(MMC0_CLK_PORT66_MARK, PORT66_FN4, MSEL4CR_15_0), - PINMUX_DATA(SDHI1_CLK_MARK, PORT66_FN6), - - /* Port67 - Port73 Function1 */ - PINMUX_DATA(MEMC_CS0_MARK, PORT67_FN1), - PINMUX_DATA(MEMC_AD8_MARK, PORT68_FN1), - PINMUX_DATA(MEMC_AD9_MARK, PORT69_FN1), - PINMUX_DATA(MEMC_AD10_MARK, PORT70_FN1), - PINMUX_DATA(MEMC_AD11_MARK, PORT71_FN1), - PINMUX_DATA(MEMC_AD12_MARK, PORT72_FN1), - PINMUX_DATA(MEMC_AD13_MARK, PORT73_FN1), - - /* Port67 - Port73 Function2 */ - PINMUX_DATA(MSIOF1_SS1_PORT67_MARK, PORT67_FN2, MSEL4CR_10_1), - PINMUX_DATA(MSIOF1_RSCK_MARK, PORT68_FN2), - PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT69_FN2), - PINMUX_DATA(MSIOF1_MCK0_MARK, PORT70_FN2), - PINMUX_DATA(MSIOF1_MCK1_MARK, PORT71_FN2), - PINMUX_DATA(MSIOF1_TSCK_PORT72_MARK, PORT72_FN2, MSEL4CR_10_1), - PINMUX_DATA(MSIOF1_TSYNC_PORT73_MARK, PORT73_FN2, MSEL4CR_10_1), - - /* Port67 - Port73 Function4 */ - PINMUX_DATA(MMC0_CMD_PORT67_MARK, PORT67_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMC0_D0_PORT68_MARK, PORT68_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMC0_D1_PORT69_MARK, PORT69_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMC0_D2_PORT70_MARK, PORT70_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMC0_D3_PORT71_MARK, PORT71_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMC0_D4_PORT72_MARK, PORT72_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMC0_D5_PORT73_MARK, PORT73_FN4, MSEL4CR_15_0), - - /* Port67 - Port73 Function6 */ - PINMUX_DATA(SDHI1_CMD_MARK, PORT67_FN6), - PINMUX_DATA(SDHI1_D0_MARK, PORT68_FN6), - PINMUX_DATA(SDHI1_D1_MARK, PORT69_FN6), - PINMUX_DATA(SDHI1_D2_MARK, PORT70_FN6), - PINMUX_DATA(SDHI1_D3_MARK, PORT71_FN6), - PINMUX_DATA(SDHI1_CD_MARK, PORT72_FN6), - PINMUX_DATA(SDHI1_WP_MARK, PORT73_FN6), - - /* Port67 - Port71 IRQ */ - PINMUX_DATA(IRQ20_MARK, PORT67_FN0), - PINMUX_DATA(IRQ16_PORT68_MARK, PORT68_FN0, MSEL1CR_16_0), - PINMUX_DATA(IRQ17_MARK, PORT69_FN0), - PINMUX_DATA(IRQ18_MARK, PORT70_FN0), - PINMUX_DATA(IRQ19_MARK, PORT71_FN0), - - /* Port74 */ - PINMUX_DATA(MEMC_AD14_MARK, PORT74_FN1), - PINMUX_DATA(MSIOF1_TXD_PORT74_MARK, PORT74_FN2, MSEL4CR_10_1), - PINMUX_DATA(MMC0_D6_PORT74_MARK, PORT74_FN4, MSEL4CR_15_0), - PINMUX_DATA(STP1_IPD7_MARK, PORT74_FN6), - PINMUX_DATA(LCD1_D21_MARK, PORT74_FN7), - - /* Port75 */ - PINMUX_DATA(MEMC_AD15_MARK, PORT75_FN1), - PINMUX_DATA(MSIOF1_RXD_PORT75_MARK, PORT75_FN2, MSEL4CR_10_1), - PINMUX_DATA(MMC0_D7_PORT75_MARK, PORT75_FN4, MSEL4CR_15_0), - PINMUX_DATA(STP1_IPD6_MARK, PORT75_FN6), - PINMUX_DATA(LCD1_D20_MARK, PORT75_FN7), - - /* Port76 - Port80 Function */ - PINMUX_DATA(SDHI0_CMD_MARK, PORT76_FN1), - PINMUX_DATA(SDHI0_D0_MARK, PORT77_FN1), - PINMUX_DATA(SDHI0_D1_MARK, PORT78_FN1), - PINMUX_DATA(SDHI0_D2_MARK, PORT79_FN1), - PINMUX_DATA(SDHI0_D3_MARK, PORT80_FN1), - - /* Port81 */ - PINMUX_DATA(SDHI0_CD_MARK, PORT81_FN1), - PINMUX_DATA(IRQ26_PORT81_MARK, PORT81_FN0, MSEL1CR_26_0), - - /* Port82 - Port88 Function */ - PINMUX_DATA(SDHI0_CLK_MARK, PORT82_FN1), - PINMUX_DATA(SDHI0_WP_MARK, PORT83_FN1), - PINMUX_DATA(RESETOUTS_MARK, PORT84_FN1), - PINMUX_DATA(USB0_PPON_MARK, PORT85_FN1), - PINMUX_DATA(USB0_OCI_MARK, PORT86_FN1), - PINMUX_DATA(USB1_PPON_MARK, PORT87_FN1), - PINMUX_DATA(USB1_OCI_MARK, PORT88_FN1), - - /* Port89 */ - PINMUX_DATA(DREQ0_MARK, PORT89_FN1), - PINMUX_DATA(BBIF2_TSCK2_PORT89_MARK, PORT89_FN2, MSEL5CR_0_1), - PINMUX_DATA(RSPI_SSL3_A_MARK, PORT89_FN6), - - /* Port90 */ - PINMUX_DATA(DACK0_MARK, PORT90_FN1), - PINMUX_DATA(BBIF2_RXD2_PORT90_MARK, PORT90_FN2, MSEL5CR_0_1), - PINMUX_DATA(RSPI_SSL2_A_MARK, PORT90_FN6), - PINMUX_DATA(WAIT_PORT90_MARK, PORT90_FN7, MSEL5CR_2_1), - - /* Port91 */ - PINMUX_DATA(MEMC_AD0_MARK, PORT91_FN1), - PINMUX_DATA(BBIF1_RXD_MARK, PORT91_FN2), - PINMUX_DATA(SCIFA5_TXD_PORT91_MARK, PORT91_FN3, MSEL5CR_15_1, MSEL5CR_14_0), - PINMUX_DATA(LCD1_D5_MARK, PORT91_FN7), - - /* Port92 */ - PINMUX_DATA(MEMC_AD1_MARK, PORT92_FN1), - PINMUX_DATA(BBIF1_TSYNC_MARK, PORT92_FN2), - PINMUX_DATA(SCIFA5_RXD_PORT92_MARK, PORT92_FN3, MSEL5CR_15_1, MSEL5CR_14_0), - PINMUX_DATA(STP0_IPD1_MARK, PORT92_FN6), - PINMUX_DATA(LCD1_D6_MARK, PORT92_FN7), - - /* Port93 */ - PINMUX_DATA(MEMC_AD2_MARK, PORT93_FN1), - PINMUX_DATA(BBIF1_TSCK_MARK, PORT93_FN2), - PINMUX_DATA(SCIFA4_TXD_PORT93_MARK, PORT93_FN3, MSEL5CR_12_1, MSEL5CR_11_0), - PINMUX_DATA(STP0_IPD3_MARK, PORT93_FN6), - PINMUX_DATA(LCD1_D8_MARK, PORT93_FN7), - - /* Port94 */ - PINMUX_DATA(MEMC_AD3_MARK, PORT94_FN1), - PINMUX_DATA(BBIF1_TXD_MARK, PORT94_FN2), - PINMUX_DATA(SCIFA4_RXD_PORT94_MARK, PORT94_FN3, MSEL5CR_12_1, MSEL5CR_11_0), - PINMUX_DATA(STP0_IPD4_MARK, PORT94_FN6), - PINMUX_DATA(LCD1_D9_MARK, PORT94_FN7), - - /* Port95 */ - PINMUX_DATA(MEMC_CS1_MARK, PORT95_FN1, MSEL4CR_6_0), - PINMUX_DATA(MEMC_A1_MARK, PORT95_FN1, MSEL4CR_6_1), - - PINMUX_DATA(SCIFA2_CTS_MARK, PORT95_FN2), - PINMUX_DATA(SIM_RST_MARK, PORT95_FN4), - PINMUX_DATA(VIO0_D14_PORT95_MARK, PORT95_FN7, MSEL5CR_27_1), - PINMUX_DATA(IRQ22_MARK, PORT95_FN0), - - /* Port96 */ - PINMUX_DATA(MEMC_ADV_MARK, PORT96_FN1, MSEL4CR_6_0), - PINMUX_DATA(MEMC_DREQ0_MARK, PORT96_FN1, MSEL4CR_6_1), - - PINMUX_DATA(SCIFA2_RTS_MARK, PORT96_FN2), - PINMUX_DATA(SIM_CLK_MARK, PORT96_FN4), - PINMUX_DATA(VIO0_D15_PORT96_MARK, PORT96_FN7, MSEL5CR_27_1), - PINMUX_DATA(IRQ23_MARK, PORT96_FN0), - - /* Port97 */ - PINMUX_DATA(MEMC_AD4_MARK, PORT97_FN1), - PINMUX_DATA(BBIF1_RSCK_MARK, PORT97_FN2), - PINMUX_DATA(LCD1_CS_MARK, PORT97_FN6), - PINMUX_DATA(LCD1_HSYN_MARK, PORT97_FN7), - PINMUX_DATA(IRQ12_PORT97_MARK, PORT97_FN0, MSEL1CR_12_0), - - /* Port98 */ - PINMUX_DATA(MEMC_AD5_MARK, PORT98_FN1), - PINMUX_DATA(BBIF1_RSYNC_MARK, PORT98_FN2), - PINMUX_DATA(LCD1_VSYN_MARK, PORT98_FN7), - PINMUX_DATA(IRQ13_PORT98_MARK, PORT98_FN0, MSEL1CR_13_0), - - /* Port99 */ - PINMUX_DATA(MEMC_AD6_MARK, PORT99_FN1), - PINMUX_DATA(BBIF1_FLOW_MARK, PORT99_FN2), - PINMUX_DATA(LCD1_WR_MARK, PORT99_FN6), - PINMUX_DATA(LCD1_DCK_MARK, PORT99_FN7), - PINMUX_DATA(IRQ14_PORT99_MARK, PORT99_FN0, MSEL1CR_14_0), - - /* Port100 */ - PINMUX_DATA(MEMC_AD7_MARK, PORT100_FN1), - PINMUX_DATA(BBIF1_RX_FLOW_N_MARK, PORT100_FN2), - PINMUX_DATA(LCD1_DON_MARK, PORT100_FN7), - PINMUX_DATA(IRQ15_PORT100_MARK, PORT100_FN0, MSEL1CR_15_0), - - /* Port101 */ - PINMUX_DATA(FCE0_MARK, PORT101_FN1), - - /* Port102 */ - PINMUX_DATA(FRB_MARK, PORT102_FN1), - PINMUX_DATA(LCD0_LCLK_PORT102_MARK, PORT102_FN4, MSEL5CR_6_0), - - /* Port103 */ - PINMUX_DATA(CS5B_MARK, PORT103_FN1), - PINMUX_DATA(FCE1_MARK, PORT103_FN2), - PINMUX_DATA(MMC1_CLK_PORT103_MARK, PORT103_FN3, MSEL4CR_15_1), - - /* Port104 */ - PINMUX_DATA(CS6A_MARK, PORT104_FN1), - PINMUX_DATA(MMC1_CMD_PORT104_MARK, PORT104_FN3, MSEL4CR_15_1), - PINMUX_DATA(IRQ11_MARK, PORT104_FN0), - - /* Port105 */ - PINMUX_DATA(CS5A_PORT105_MARK, PORT105_FN1, MSEL5CR_2_0), - PINMUX_DATA(SCIFA3_RTS_PORT105_MARK, PORT105_FN4, MSEL5CR_8_0), - - /* Port106 */ - PINMUX_DATA(IOIS16_MARK, PORT106_FN1), - PINMUX_DATA(IDE_EXBUF_ENB_MARK, PORT106_FN6), - - /* Port107 - Port115 Function */ - PINMUX_DATA(WE3_ICIOWR_MARK, PORT107_FN1), - PINMUX_DATA(WE2_ICIORD_MARK, PORT108_FN1), - PINMUX_DATA(CS0_MARK, PORT109_FN1), - PINMUX_DATA(CS2_MARK, PORT110_FN1), - PINMUX_DATA(CS4_MARK, PORT111_FN1), - PINMUX_DATA(WE1_MARK, PORT112_FN1), - PINMUX_DATA(WE0_FWE_MARK, PORT113_FN1), - PINMUX_DATA(RDWR_MARK, PORT114_FN1), - PINMUX_DATA(RD_FSC_MARK, PORT115_FN1), - - /* Port116 */ - PINMUX_DATA(A25_MARK, PORT116_FN1), - PINMUX_DATA(MSIOF0_SS2_MARK, PORT116_FN2), - PINMUX_DATA(MSIOF1_SS2_PORT116_MARK, PORT116_FN3, MSEL4CR_10_0), - PINMUX_DATA(SCIFA3_SCK_PORT116_MARK, PORT116_FN4, MSEL5CR_8_0), - PINMUX_DATA(GPO1_MARK, PORT116_FN5), - - /* Port117 */ - PINMUX_DATA(A24_MARK, PORT117_FN1), - PINMUX_DATA(MSIOF0_SS1_MARK, PORT117_FN2), - PINMUX_DATA(MSIOF1_SS1_PORT117_MARK, PORT117_FN3, MSEL4CR_10_0), - PINMUX_DATA(SCIFA3_CTS_PORT117_MARK, PORT117_FN4, MSEL5CR_8_0), - PINMUX_DATA(GPO0_MARK, PORT117_FN5), - - /* Port118 */ - PINMUX_DATA(A23_MARK, PORT118_FN1), - PINMUX_DATA(MSIOF0_MCK1_MARK, PORT118_FN2), - PINMUX_DATA(MSIOF1_RXD_PORT118_MARK, PORT118_FN3, MSEL4CR_10_0), - PINMUX_DATA(GPI1_MARK, PORT118_FN5), - PINMUX_DATA(IRQ9_PORT118_MARK, PORT118_FN0, MSEL1CR_9_0), - - /* Port119 */ - PINMUX_DATA(A22_MARK, PORT119_FN1), - PINMUX_DATA(MSIOF0_MCK0_MARK, PORT119_FN2), - PINMUX_DATA(MSIOF1_TXD_PORT119_MARK, PORT119_FN3, MSEL4CR_10_0), - PINMUX_DATA(GPI0_MARK, PORT119_FN5), - PINMUX_DATA(IRQ8_MARK, PORT119_FN0), - - /* Port120 */ - PINMUX_DATA(A21_MARK, PORT120_FN1), - PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT120_FN2), - PINMUX_DATA(MSIOF1_TSYNC_PORT120_MARK, PORT120_FN3, MSEL4CR_10_0), - PINMUX_DATA(IRQ7_PORT120_MARK, PORT120_FN0, MSEL1CR_7_1), - - /* Port121 */ - PINMUX_DATA(A20_MARK, PORT121_FN1), - PINMUX_DATA(MSIOF0_RSCK_MARK, PORT121_FN2), - PINMUX_DATA(MSIOF1_TSCK_PORT121_MARK, PORT121_FN3, MSEL4CR_10_0), - PINMUX_DATA(IRQ6_PORT121_MARK, PORT121_FN0, MSEL1CR_6_0), - - /* Port122 */ - PINMUX_DATA(A19_MARK, PORT122_FN1), - PINMUX_DATA(MSIOF0_RXD_MARK, PORT122_FN2), - - /* Port123 */ - PINMUX_DATA(A18_MARK, PORT123_FN1), - PINMUX_DATA(MSIOF0_TSCK_MARK, PORT123_FN2), - - /* Port124 */ - PINMUX_DATA(A17_MARK, PORT124_FN1), - PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT124_FN2), - - /* Port125 - Port141 Function */ - PINMUX_DATA(A16_MARK, PORT125_FN1), - PINMUX_DATA(A15_MARK, PORT126_FN1), - PINMUX_DATA(A14_MARK, PORT127_FN1), - PINMUX_DATA(A13_MARK, PORT128_FN1), - PINMUX_DATA(A12_MARK, PORT129_FN1), - PINMUX_DATA(A11_MARK, PORT130_FN1), - PINMUX_DATA(A10_MARK, PORT131_FN1), - PINMUX_DATA(A9_MARK, PORT132_FN1), - PINMUX_DATA(A8_MARK, PORT133_FN1), - PINMUX_DATA(A7_MARK, PORT134_FN1), - PINMUX_DATA(A6_MARK, PORT135_FN1), - PINMUX_DATA(A5_FCDE_MARK, PORT136_FN1), - PINMUX_DATA(A4_FOE_MARK, PORT137_FN1), - PINMUX_DATA(A3_MARK, PORT138_FN1), - PINMUX_DATA(A2_MARK, PORT139_FN1), - PINMUX_DATA(A1_MARK, PORT140_FN1), - PINMUX_DATA(CKO_MARK, PORT141_FN1), - - /* Port142 - Port157 Function1 */ - PINMUX_DATA(D15_NAF15_MARK, PORT142_FN1), - PINMUX_DATA(D14_NAF14_MARK, PORT143_FN1), - PINMUX_DATA(D13_NAF13_MARK, PORT144_FN1), - PINMUX_DATA(D12_NAF12_MARK, PORT145_FN1), - PINMUX_DATA(D11_NAF11_MARK, PORT146_FN1), - PINMUX_DATA(D10_NAF10_MARK, PORT147_FN1), - PINMUX_DATA(D9_NAF9_MARK, PORT148_FN1), - PINMUX_DATA(D8_NAF8_MARK, PORT149_FN1), - PINMUX_DATA(D7_NAF7_MARK, PORT150_FN1), - PINMUX_DATA(D6_NAF6_MARK, PORT151_FN1), - PINMUX_DATA(D5_NAF5_MARK, PORT152_FN1), - PINMUX_DATA(D4_NAF4_MARK, PORT153_FN1), - PINMUX_DATA(D3_NAF3_MARK, PORT154_FN1), - PINMUX_DATA(D2_NAF2_MARK, PORT155_FN1), - PINMUX_DATA(D1_NAF1_MARK, PORT156_FN1), - PINMUX_DATA(D0_NAF0_MARK, PORT157_FN1), - - /* Port142 - Port149 Function3 */ - PINMUX_DATA(MMC1_D7_PORT142_MARK, PORT142_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMC1_D6_PORT143_MARK, PORT143_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMC1_D5_PORT144_MARK, PORT144_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMC1_D4_PORT145_MARK, PORT145_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMC1_D3_PORT146_MARK, PORT146_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMC1_D2_PORT147_MARK, PORT147_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMC1_D1_PORT148_MARK, PORT148_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMC1_D0_PORT149_MARK, PORT149_FN3, MSEL4CR_15_1), - - /* Port158 */ - PINMUX_DATA(D31_MARK, PORT158_FN1), - PINMUX_DATA(SCIFA3_SCK_PORT158_MARK, PORT158_FN2, MSEL5CR_8_1), - PINMUX_DATA(RMII_REF125CK_MARK, PORT158_FN3), - PINMUX_DATA(LCD0_D21_PORT158_MARK, PORT158_FN4, MSEL5CR_6_1), - PINMUX_DATA(IRDA_FIRSEL_MARK, PORT158_FN5), - PINMUX_DATA(IDE_D15_MARK, PORT158_FN6), - - /* Port159 */ - PINMUX_DATA(D30_MARK, PORT159_FN1), - PINMUX_DATA(SCIFA3_RXD_PORT159_MARK, PORT159_FN2, MSEL5CR_8_1), - PINMUX_DATA(RMII_REF50CK_MARK, PORT159_FN3), - PINMUX_DATA(LCD0_D23_PORT159_MARK, PORT159_FN4, MSEL5CR_6_1), - PINMUX_DATA(IDE_D14_MARK, PORT159_FN6), - - /* Port160 */ - PINMUX_DATA(D29_MARK, PORT160_FN1), - PINMUX_DATA(SCIFA3_TXD_PORT160_MARK, PORT160_FN2, MSEL5CR_8_1), - PINMUX_DATA(LCD0_D22_PORT160_MARK, PORT160_FN4, MSEL5CR_6_1), - PINMUX_DATA(VIO1_HD_MARK, PORT160_FN5), - PINMUX_DATA(IDE_D13_MARK, PORT160_FN6), - - /* Port161 */ - PINMUX_DATA(D28_MARK, PORT161_FN1), - PINMUX_DATA(SCIFA3_RTS_PORT161_MARK, PORT161_FN2, MSEL5CR_8_1), - PINMUX_DATA(ET_RX_DV_MARK, PORT161_FN3), - PINMUX_DATA(LCD0_D20_PORT161_MARK, PORT161_FN4, MSEL5CR_6_1), - PINMUX_DATA(IRDA_IN_MARK, PORT161_FN5), - PINMUX_DATA(IDE_D12_MARK, PORT161_FN6), - - /* Port162 */ - PINMUX_DATA(D27_MARK, PORT162_FN1), - PINMUX_DATA(SCIFA3_CTS_PORT162_MARK, PORT162_FN2, MSEL5CR_8_1), - PINMUX_DATA(LCD0_D19_PORT162_MARK, PORT162_FN4, MSEL5CR_6_1), - PINMUX_DATA(IRDA_OUT_MARK, PORT162_FN5), - PINMUX_DATA(IDE_D11_MARK, PORT162_FN6), - - /* Port163 */ - PINMUX_DATA(D26_MARK, PORT163_FN1), - PINMUX_DATA(MSIOF2_SS2_MARK, PORT163_FN2), - PINMUX_DATA(ET_COL_MARK, PORT163_FN3), - PINMUX_DATA(LCD0_D18_PORT163_MARK, PORT163_FN4, MSEL5CR_6_1), - PINMUX_DATA(IROUT_MARK, PORT163_FN5), - PINMUX_DATA(IDE_D10_MARK, PORT163_FN6), - - /* Port164 */ - PINMUX_DATA(D25_MARK, PORT164_FN1), - PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT164_FN2), - PINMUX_DATA(ET_PHY_INT_MARK, PORT164_FN3), - PINMUX_DATA(LCD0_RD_MARK, PORT164_FN4), - PINMUX_DATA(IDE_D9_MARK, PORT164_FN6), - - /* Port165 */ - PINMUX_DATA(D24_MARK, PORT165_FN1), - PINMUX_DATA(MSIOF2_RXD_MARK, PORT165_FN2), - PINMUX_DATA(LCD0_LCLK_PORT165_MARK, PORT165_FN4, MSEL5CR_6_1), - PINMUX_DATA(IDE_D8_MARK, PORT165_FN6), - - /* Port166 - Port171 Function1 */ - PINMUX_DATA(D21_MARK, PORT166_FN1), - PINMUX_DATA(D20_MARK, PORT167_FN1), - PINMUX_DATA(D19_MARK, PORT168_FN1), - PINMUX_DATA(D18_MARK, PORT169_FN1), - PINMUX_DATA(D17_MARK, PORT170_FN1), - PINMUX_DATA(D16_MARK, PORT171_FN1), - - /* Port166 - Port171 Function3 */ - PINMUX_DATA(ET_ETXD5_MARK, PORT166_FN3), - PINMUX_DATA(ET_ETXD4_MARK, PORT167_FN3), - PINMUX_DATA(ET_ETXD3_MARK, PORT168_FN3), - PINMUX_DATA(ET_ETXD2_MARK, PORT169_FN3), - PINMUX_DATA(ET_ETXD1_MARK, PORT170_FN3), - PINMUX_DATA(ET_ETXD0_MARK, PORT171_FN3), - - /* Port166 - Port171 Function6 */ - PINMUX_DATA(IDE_D5_MARK, PORT166_FN6), - PINMUX_DATA(IDE_D4_MARK, PORT167_FN6), - PINMUX_DATA(IDE_D3_MARK, PORT168_FN6), - PINMUX_DATA(IDE_D2_MARK, PORT169_FN6), - PINMUX_DATA(IDE_D1_MARK, PORT170_FN6), - PINMUX_DATA(IDE_D0_MARK, PORT171_FN6), - - /* Port167 - Port171 IRQ */ - PINMUX_DATA(IRQ31_PORT167_MARK, PORT167_FN0, MSEL1CR_31_0), - PINMUX_DATA(IRQ27_PORT168_MARK, PORT168_FN0, MSEL1CR_27_0), - PINMUX_DATA(IRQ28_PORT169_MARK, PORT169_FN0, MSEL1CR_28_0), - PINMUX_DATA(IRQ29_PORT170_MARK, PORT170_FN0, MSEL1CR_29_0), - PINMUX_DATA(IRQ30_PORT171_MARK, PORT171_FN0, MSEL1CR_30_0), - - /* Port172 */ - PINMUX_DATA(D23_MARK, PORT172_FN1), - PINMUX_DATA(SCIFB_RTS_PORT172_MARK, PORT172_FN2, MSEL5CR_17_1), - PINMUX_DATA(ET_ETXD7_MARK, PORT172_FN3), - PINMUX_DATA(IDE_D7_MARK, PORT172_FN6), - PINMUX_DATA(IRQ4_PORT172_MARK, PORT172_FN0, MSEL1CR_4_1), - - /* Port173 */ - PINMUX_DATA(D22_MARK, PORT173_FN1), - PINMUX_DATA(SCIFB_CTS_PORT173_MARK, PORT173_FN2, MSEL5CR_17_1), - PINMUX_DATA(ET_ETXD6_MARK, PORT173_FN3), - PINMUX_DATA(IDE_D6_MARK, PORT173_FN6), - PINMUX_DATA(IRQ6_PORT173_MARK, PORT173_FN0, MSEL1CR_6_1), - - /* Port174 */ - PINMUX_DATA(A26_MARK, PORT174_FN1), - PINMUX_DATA(MSIOF0_TXD_MARK, PORT174_FN2), - PINMUX_DATA(ET_RX_CLK_MARK, PORT174_FN3), - PINMUX_DATA(SCIFA3_RXD_PORT174_MARK, PORT174_FN4, MSEL5CR_8_0), - - /* Port175 */ - PINMUX_DATA(A0_MARK, PORT175_FN1), - PINMUX_DATA(BS_MARK, PORT175_FN2), - PINMUX_DATA(ET_WOL_MARK, PORT175_FN3), - PINMUX_DATA(SCIFA3_TXD_PORT175_MARK, PORT175_FN4, MSEL5CR_8_0), - - /* Port176 */ - PINMUX_DATA(ET_GTX_CLK_MARK, PORT176_FN3), - - /* Port177 */ - PINMUX_DATA(WAIT_PORT177_MARK, PORT177_FN1, MSEL5CR_2_0), - PINMUX_DATA(ET_LINK_MARK, PORT177_FN3), - PINMUX_DATA(IDE_IOWR_MARK, PORT177_FN6), - PINMUX_DATA(SDHI2_WP_PORT177_MARK, PORT177_FN7, MSEL5CR_19_1), - - /* Port178 */ - PINMUX_DATA(VIO0_D12_MARK, PORT178_FN1), - PINMUX_DATA(VIO1_D4_MARK, PORT178_FN5), - PINMUX_DATA(IDE_IORD_MARK, PORT178_FN6), - - /* Port179 */ - PINMUX_DATA(VIO0_D11_MARK, PORT179_FN1), - PINMUX_DATA(VIO1_D3_MARK, PORT179_FN5), - PINMUX_DATA(IDE_IORDY_MARK, PORT179_FN6), - - /* Port180 */ - PINMUX_DATA(VIO0_D10_MARK, PORT180_FN1), - PINMUX_DATA(TPU0TO3_MARK, PORT180_FN4), - PINMUX_DATA(VIO1_D2_MARK, PORT180_FN5), - PINMUX_DATA(IDE_INT_MARK, PORT180_FN6), - PINMUX_DATA(IRQ24_MARK, PORT180_FN0), - - /* Port181 */ - PINMUX_DATA(VIO0_D9_MARK, PORT181_FN1), - PINMUX_DATA(VIO1_D1_MARK, PORT181_FN5), - PINMUX_DATA(IDE_RST_MARK, PORT181_FN6), - - /* Port182 */ - PINMUX_DATA(VIO0_D8_MARK, PORT182_FN1), - PINMUX_DATA(VIO1_D0_MARK, PORT182_FN5), - PINMUX_DATA(IDE_DIRECTION_MARK, PORT182_FN6), - - /* Port183 */ - PINMUX_DATA(DREQ1_MARK, PORT183_FN1), - PINMUX_DATA(BBIF2_TXD2_PORT183_MARK, PORT183_FN2, MSEL5CR_0_1), - PINMUX_DATA(ET_TX_EN_MARK, PORT183_FN3), - - /* Port184 */ - PINMUX_DATA(DACK1_MARK, PORT184_FN1), - PINMUX_DATA(BBIF2_TSYNC2_PORT184_MARK, PORT184_FN2, MSEL5CR_0_1), - PINMUX_DATA(ET_TX_CLK_MARK, PORT184_FN3), - - /* Port185 - Port192 Function1 */ - PINMUX_DATA(SCIFA1_SCK_MARK, PORT185_FN1), - PINMUX_DATA(SCIFB_RTS_PORT186_MARK, PORT186_FN1, MSEL5CR_17_0), - PINMUX_DATA(SCIFB_CTS_PORT187_MARK, PORT187_FN1, MSEL5CR_17_0), - PINMUX_DATA(SCIFA0_SCK_MARK, PORT188_FN1), - PINMUX_DATA(SCIFB_SCK_PORT190_MARK, PORT190_FN1, MSEL5CR_17_0), - PINMUX_DATA(SCIFB_RXD_PORT191_MARK, PORT191_FN1, MSEL5CR_17_0), - PINMUX_DATA(SCIFB_TXD_PORT192_MARK, PORT192_FN1, MSEL5CR_17_0), - - /* Port185 - Port192 Function3 */ - PINMUX_DATA(ET_ERXD0_MARK, PORT185_FN3), - PINMUX_DATA(ET_ERXD1_MARK, PORT186_FN3), - PINMUX_DATA(ET_ERXD2_MARK, PORT187_FN3), - PINMUX_DATA(ET_ERXD3_MARK, PORT188_FN3), - PINMUX_DATA(ET_ERXD4_MARK, PORT189_FN3), - PINMUX_DATA(ET_ERXD5_MARK, PORT190_FN3), - PINMUX_DATA(ET_ERXD6_MARK, PORT191_FN3), - PINMUX_DATA(ET_ERXD7_MARK, PORT192_FN3), - - /* Port185 - Port192 Function6 */ - PINMUX_DATA(STP1_IPCLK_MARK, PORT185_FN6), - PINMUX_DATA(STP1_IPD0_PORT186_MARK, PORT186_FN6, MSEL5CR_23_0), - PINMUX_DATA(STP1_IPEN_PORT187_MARK, PORT187_FN6, MSEL5CR_23_0), - PINMUX_DATA(STP1_IPSYNC_MARK, PORT188_FN6), - PINMUX_DATA(STP0_IPCLK_MARK, PORT189_FN6), - PINMUX_DATA(STP0_IPD0_MARK, PORT190_FN6), - PINMUX_DATA(STP0_IPEN_MARK, PORT191_FN6), - PINMUX_DATA(STP0_IPSYNC_MARK, PORT192_FN6), - - /* Port193 */ - PINMUX_DATA(SCIFA0_CTS_MARK, PORT193_FN1), - PINMUX_DATA(RMII_CRS_DV_MARK, PORT193_FN3), - PINMUX_DATA(STP1_IPEN_PORT193_MARK, PORT193_FN6, MSEL5CR_23_1), /* ? */ - PINMUX_DATA(LCD1_D17_MARK, PORT193_FN7), - - /* Port194 */ - PINMUX_DATA(SCIFA0_RTS_MARK, PORT194_FN1), - PINMUX_DATA(RMII_RX_ER_MARK, PORT194_FN3), - PINMUX_DATA(STP1_IPD0_PORT194_MARK, PORT194_FN6, MSEL5CR_23_1), /* ? */ - PINMUX_DATA(LCD1_D16_MARK, PORT194_FN7), - - /* Port195 */ - PINMUX_DATA(SCIFA1_RXD_MARK, PORT195_FN1), - PINMUX_DATA(RMII_RXD0_MARK, PORT195_FN3), - PINMUX_DATA(STP1_IPD3_MARK, PORT195_FN6), - PINMUX_DATA(LCD1_D15_MARK, PORT195_FN7), - - /* Port196 */ - PINMUX_DATA(SCIFA1_TXD_MARK, PORT196_FN1), - PINMUX_DATA(RMII_RXD1_MARK, PORT196_FN3), - PINMUX_DATA(STP1_IPD2_MARK, PORT196_FN6), - PINMUX_DATA(LCD1_D14_MARK, PORT196_FN7), - - /* Port197 */ - PINMUX_DATA(SCIFA0_RXD_MARK, PORT197_FN1), - PINMUX_DATA(VIO1_CLK_MARK, PORT197_FN5), - PINMUX_DATA(STP1_IPD5_MARK, PORT197_FN6), - PINMUX_DATA(LCD1_D19_MARK, PORT197_FN7), - - /* Port198 */ - PINMUX_DATA(SCIFA0_TXD_MARK, PORT198_FN1), - PINMUX_DATA(VIO1_VD_MARK, PORT198_FN5), - PINMUX_DATA(STP1_IPD4_MARK, PORT198_FN6), - PINMUX_DATA(LCD1_D18_MARK, PORT198_FN7), - - /* Port199 */ - PINMUX_DATA(MEMC_NWE_MARK, PORT199_FN1), - PINMUX_DATA(SCIFA2_SCK_PORT199_MARK, PORT199_FN2, MSEL5CR_7_1), - PINMUX_DATA(RMII_TX_EN_MARK, PORT199_FN3), - PINMUX_DATA(SIM_D_PORT199_MARK, PORT199_FN4, MSEL5CR_21_1), - PINMUX_DATA(STP1_IPD1_MARK, PORT199_FN6), - PINMUX_DATA(LCD1_D13_MARK, PORT199_FN7), - - /* Port200 */ - PINMUX_DATA(MEMC_NOE_MARK, PORT200_FN1), - PINMUX_DATA(SCIFA2_RXD_MARK, PORT200_FN2), - PINMUX_DATA(RMII_TXD0_MARK, PORT200_FN3), - PINMUX_DATA(STP0_IPD7_MARK, PORT200_FN6), - PINMUX_DATA(LCD1_D12_MARK, PORT200_FN7), - - /* Port201 */ - PINMUX_DATA(MEMC_WAIT_MARK, PORT201_FN1, MSEL4CR_6_0), - PINMUX_DATA(MEMC_DREQ1_MARK, PORT201_FN1, MSEL4CR_6_1), - - PINMUX_DATA(SCIFA2_TXD_MARK, PORT201_FN2), - PINMUX_DATA(RMII_TXD1_MARK, PORT201_FN3), - PINMUX_DATA(STP0_IPD6_MARK, PORT201_FN6), - PINMUX_DATA(LCD1_D11_MARK, PORT201_FN7), - - /* Port202 */ - PINMUX_DATA(MEMC_BUSCLK_MARK, PORT202_FN1, MSEL4CR_6_0), - PINMUX_DATA(MEMC_A0_MARK, PORT202_FN1, MSEL4CR_6_1), - - PINMUX_DATA(MSIOF1_SS2_PORT202_MARK, PORT202_FN2, MSEL4CR_10_1), - PINMUX_DATA(RMII_MDC_MARK, PORT202_FN3), - PINMUX_DATA(TPU0TO2_PORT202_MARK, PORT202_FN4, MSEL5CR_25_1), - PINMUX_DATA(IDE_CS0_MARK, PORT202_FN6), - PINMUX_DATA(SDHI2_CD_PORT202_MARK, PORT202_FN7, MSEL5CR_19_1), - PINMUX_DATA(IRQ21_MARK, PORT202_FN0), - - /* Port203 - Port208 Function1 */ - PINMUX_DATA(SDHI2_CLK_MARK, PORT203_FN1), - PINMUX_DATA(SDHI2_CMD_MARK, PORT204_FN1), - PINMUX_DATA(SDHI2_D0_MARK, PORT205_FN1), - PINMUX_DATA(SDHI2_D1_MARK, PORT206_FN1), - PINMUX_DATA(SDHI2_D2_MARK, PORT207_FN1), - PINMUX_DATA(SDHI2_D3_MARK, PORT208_FN1), - - /* Port203 - Port208 Function3 */ - PINMUX_DATA(ET_TX_ER_MARK, PORT203_FN3), - PINMUX_DATA(ET_RX_ER_MARK, PORT204_FN3), - PINMUX_DATA(ET_CRS_MARK, PORT205_FN3), - PINMUX_DATA(ET_MDC_MARK, PORT206_FN3), - PINMUX_DATA(ET_MDIO_MARK, PORT207_FN3), - PINMUX_DATA(RMII_MDIO_MARK, PORT208_FN3), - - /* Port203 - Port208 Function6 */ - PINMUX_DATA(IDE_A2_MARK, PORT203_FN6), - PINMUX_DATA(IDE_A1_MARK, PORT204_FN6), - PINMUX_DATA(IDE_A0_MARK, PORT205_FN6), - PINMUX_DATA(IDE_IODACK_MARK, PORT206_FN6), - PINMUX_DATA(IDE_IODREQ_MARK, PORT207_FN6), - PINMUX_DATA(IDE_CS1_MARK, PORT208_FN6), - - /* Port203 - Port208 Function7 */ - PINMUX_DATA(SCIFA4_TXD_PORT203_MARK, PORT203_FN7, MSEL5CR_12_0, MSEL5CR_11_1), - PINMUX_DATA(SCIFA4_RXD_PORT204_MARK, PORT204_FN7, MSEL5CR_12_0, MSEL5CR_11_1), - PINMUX_DATA(SCIFA4_SCK_PORT205_MARK, PORT205_FN7, MSEL5CR_10_1), - PINMUX_DATA(SCIFA5_SCK_PORT206_MARK, PORT206_FN7, MSEL5CR_13_1), - PINMUX_DATA(SCIFA5_RXD_PORT207_MARK, PORT207_FN7, MSEL5CR_15_0, MSEL5CR_14_1), - PINMUX_DATA(SCIFA5_TXD_PORT208_MARK, PORT208_FN7, MSEL5CR_15_0, MSEL5CR_14_1), - - /* Port209 */ - PINMUX_DATA(VBUS_MARK, PORT209_FN1), - PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_0), - - /* Port210 */ - PINMUX_DATA(IRQ9_PORT210_MARK, PORT210_FN0, MSEL1CR_9_1), - PINMUX_DATA(HDMI_HPD_MARK, PORT210_FN1), - - /* Port211 */ - PINMUX_DATA(IRQ16_PORT211_MARK, PORT211_FN0, MSEL1CR_16_1), - PINMUX_DATA(HDMI_CEC_MARK, PORT211_FN1), - - /* LCDC select */ - PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0), - PINMUX_DATA(LCDC1_SELECT_MARK, MSEL3CR_6_1), - - /* SDENC */ - PINMUX_DATA(SDENC_CPG_MARK, MSEL4CR_19_0), - PINMUX_DATA(SDENC_DV_CLKI_MARK, MSEL4CR_19_1), - - /* SYSC */ - PINMUX_DATA(RESETP_PULLUP_MARK, MSEL4CR_4_0), - PINMUX_DATA(RESETP_PLAIN_MARK, MSEL4CR_4_1), - - /* DEBUG */ - PINMUX_DATA(EDEBGREQ_PULLDOWN_MARK, MSEL4CR_1_0), - PINMUX_DATA(EDEBGREQ_PULLUP_MARK, MSEL4CR_1_1), - - PINMUX_DATA(TRACEAUD_FROM_VIO_MARK, MSEL5CR_30_0, MSEL5CR_29_0), - PINMUX_DATA(TRACEAUD_FROM_LCDC0_MARK, MSEL5CR_30_0, MSEL5CR_29_1), - PINMUX_DATA(TRACEAUD_FROM_MEMC_MARK, MSEL5CR_30_1, MSEL5CR_29_0), -}; - -static struct pinmux_gpio pinmux_gpios[] = { - - /* PORT */ - GPIO_PORT_ALL(), - - /* IRQ */ - GPIO_FN(IRQ0_PORT2), GPIO_FN(IRQ0_PORT13), - GPIO_FN(IRQ1), - GPIO_FN(IRQ2_PORT11), GPIO_FN(IRQ2_PORT12), - GPIO_FN(IRQ3_PORT10), GPIO_FN(IRQ3_PORT14), - GPIO_FN(IRQ4_PORT15), GPIO_FN(IRQ4_PORT172), - GPIO_FN(IRQ5_PORT0), GPIO_FN(IRQ5_PORT1), - GPIO_FN(IRQ6_PORT121), GPIO_FN(IRQ6_PORT173), - GPIO_FN(IRQ7_PORT120), GPIO_FN(IRQ7_PORT209), - GPIO_FN(IRQ8), - GPIO_FN(IRQ9_PORT118), GPIO_FN(IRQ9_PORT210), - GPIO_FN(IRQ10), - GPIO_FN(IRQ11), - GPIO_FN(IRQ12_PORT42), GPIO_FN(IRQ12_PORT97), - GPIO_FN(IRQ13_PORT64), GPIO_FN(IRQ13_PORT98), - GPIO_FN(IRQ14_PORT63), GPIO_FN(IRQ14_PORT99), - GPIO_FN(IRQ15_PORT62), GPIO_FN(IRQ15_PORT100), - GPIO_FN(IRQ16_PORT68), GPIO_FN(IRQ16_PORT211), - GPIO_FN(IRQ17), - GPIO_FN(IRQ18), - GPIO_FN(IRQ19), - GPIO_FN(IRQ20), - GPIO_FN(IRQ21), - GPIO_FN(IRQ22), - GPIO_FN(IRQ23), - GPIO_FN(IRQ24), - GPIO_FN(IRQ25), - GPIO_FN(IRQ26_PORT58), GPIO_FN(IRQ26_PORT81), - GPIO_FN(IRQ27_PORT57), GPIO_FN(IRQ27_PORT168), - GPIO_FN(IRQ28_PORT56), GPIO_FN(IRQ28_PORT169), - GPIO_FN(IRQ29_PORT50), GPIO_FN(IRQ29_PORT170), - GPIO_FN(IRQ30_PORT49), GPIO_FN(IRQ30_PORT171), - GPIO_FN(IRQ31_PORT41), GPIO_FN(IRQ31_PORT167), - - /* Function */ - - /* DBGT */ - GPIO_FN(DBGMDT2), GPIO_FN(DBGMDT1), GPIO_FN(DBGMDT0), - GPIO_FN(DBGMD10), GPIO_FN(DBGMD11), GPIO_FN(DBGMD20), - GPIO_FN(DBGMD21), - - /* FSI-A */ - GPIO_FN(FSIAISLD_PORT0), /* FSIAISLD Port 0/5 */ - GPIO_FN(FSIAISLD_PORT5), - GPIO_FN(FSIASPDIF_PORT9), /* FSIASPDIF Port 9/18 */ - GPIO_FN(FSIASPDIF_PORT18), - GPIO_FN(FSIAOSLD1), GPIO_FN(FSIAOSLD2), GPIO_FN(FSIAOLR), - GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), GPIO_FN(FSIAOMC), - GPIO_FN(FSIACK), GPIO_FN(FSIAILR), GPIO_FN(FSIAIBT), - - /* FSI-B */ - GPIO_FN(FSIBCK), - - /* FMSI */ - GPIO_FN(FMSISLD_PORT1), /* FMSISLD Port 1/6 */ - GPIO_FN(FMSISLD_PORT6), - GPIO_FN(FMSIILR), GPIO_FN(FMSIIBT), GPIO_FN(FMSIOLR), - GPIO_FN(FMSIOBT), GPIO_FN(FMSICK), GPIO_FN(FMSOILR), - GPIO_FN(FMSOIBT), GPIO_FN(FMSOOLR), GPIO_FN(FMSOOBT), - GPIO_FN(FMSOSLD), GPIO_FN(FMSOCK), - - /* SCIFA0 */ - GPIO_FN(SCIFA0_SCK), GPIO_FN(SCIFA0_CTS), GPIO_FN(SCIFA0_RTS), - GPIO_FN(SCIFA0_RXD), GPIO_FN(SCIFA0_TXD), - - /* SCIFA1 */ - GPIO_FN(SCIFA1_CTS), GPIO_FN(SCIFA1_SCK), - GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_TXD), GPIO_FN(SCIFA1_RTS), - - /* SCIFA2 */ - GPIO_FN(SCIFA2_SCK_PORT22), /* SCIFA2_SCK Port 22/199 */ - GPIO_FN(SCIFA2_SCK_PORT199), - GPIO_FN(SCIFA2_RXD), GPIO_FN(SCIFA2_TXD), - GPIO_FN(SCIFA2_CTS), GPIO_FN(SCIFA2_RTS), - - /* SCIFA3 */ - GPIO_FN(SCIFA3_RTS_PORT105), /* MSEL5CR_8_0 */ - GPIO_FN(SCIFA3_SCK_PORT116), - GPIO_FN(SCIFA3_CTS_PORT117), - GPIO_FN(SCIFA3_RXD_PORT174), - GPIO_FN(SCIFA3_TXD_PORT175), - - GPIO_FN(SCIFA3_RTS_PORT161), /* MSEL5CR_8_1 */ - GPIO_FN(SCIFA3_SCK_PORT158), - GPIO_FN(SCIFA3_CTS_PORT162), - GPIO_FN(SCIFA3_RXD_PORT159), - GPIO_FN(SCIFA3_TXD_PORT160), - - /* SCIFA4 */ - GPIO_FN(SCIFA4_RXD_PORT12), /* MSEL5CR[12:11] = 00 */ - GPIO_FN(SCIFA4_TXD_PORT13), - - GPIO_FN(SCIFA4_RXD_PORT204), /* MSEL5CR[12:11] = 01 */ - GPIO_FN(SCIFA4_TXD_PORT203), - - GPIO_FN(SCIFA4_RXD_PORT94), /* MSEL5CR[12:11] = 10 */ - GPIO_FN(SCIFA4_TXD_PORT93), - - GPIO_FN(SCIFA4_SCK_PORT21), /* SCIFA4_SCK Port 21/205 */ - GPIO_FN(SCIFA4_SCK_PORT205), - - /* SCIFA5 */ - GPIO_FN(SCIFA5_TXD_PORT20), /* MSEL5CR[15:14] = 00 */ - GPIO_FN(SCIFA5_RXD_PORT10), - - GPIO_FN(SCIFA5_RXD_PORT207), /* MSEL5CR[15:14] = 01 */ - GPIO_FN(SCIFA5_TXD_PORT208), - - GPIO_FN(SCIFA5_TXD_PORT91), /* MSEL5CR[15:14] = 10 */ - GPIO_FN(SCIFA5_RXD_PORT92), - - GPIO_FN(SCIFA5_SCK_PORT23), /* SCIFA5_SCK Port 23/206 */ - GPIO_FN(SCIFA5_SCK_PORT206), - - /* SCIFA6 */ - GPIO_FN(SCIFA6_SCK), GPIO_FN(SCIFA6_RXD), GPIO_FN(SCIFA6_TXD), - - /* SCIFA7 */ - GPIO_FN(SCIFA7_TXD), GPIO_FN(SCIFA7_RXD), - - /* SCIFAB */ - GPIO_FN(SCIFB_SCK_PORT190), /* MSEL5CR_17_0 */ - GPIO_FN(SCIFB_RXD_PORT191), - GPIO_FN(SCIFB_TXD_PORT192), - GPIO_FN(SCIFB_RTS_PORT186), - GPIO_FN(SCIFB_CTS_PORT187), - - GPIO_FN(SCIFB_SCK_PORT2), /* MSEL5CR_17_1 */ - GPIO_FN(SCIFB_RXD_PORT3), - GPIO_FN(SCIFB_TXD_PORT4), - GPIO_FN(SCIFB_RTS_PORT172), - GPIO_FN(SCIFB_CTS_PORT173), - - /* LCD0 */ - GPIO_FN(LCD0_D0), GPIO_FN(LCD0_D1), GPIO_FN(LCD0_D2), - GPIO_FN(LCD0_D3), GPIO_FN(LCD0_D4), GPIO_FN(LCD0_D5), - GPIO_FN(LCD0_D6), GPIO_FN(LCD0_D7), GPIO_FN(LCD0_D8), - GPIO_FN(LCD0_D9), GPIO_FN(LCD0_D10), GPIO_FN(LCD0_D11), - GPIO_FN(LCD0_D12), GPIO_FN(LCD0_D13), GPIO_FN(LCD0_D14), - GPIO_FN(LCD0_D15), GPIO_FN(LCD0_D16), GPIO_FN(LCD0_D17), - GPIO_FN(LCD0_DON), GPIO_FN(LCD0_VCPWC), GPIO_FN(LCD0_VEPWC), - GPIO_FN(LCD0_DCK), GPIO_FN(LCD0_VSYN), - GPIO_FN(LCD0_HSYN), GPIO_FN(LCD0_DISP), - GPIO_FN(LCD0_WR), GPIO_FN(LCD0_RD), - GPIO_FN(LCD0_CS), GPIO_FN(LCD0_RS), - - GPIO_FN(LCD0_D18_PORT163), GPIO_FN(LCD0_D19_PORT162), - GPIO_FN(LCD0_D20_PORT161), GPIO_FN(LCD0_D21_PORT158), - GPIO_FN(LCD0_D22_PORT160), GPIO_FN(LCD0_D23_PORT159), - GPIO_FN(LCD0_LCLK_PORT165), /* MSEL5CR_6_1 */ - - GPIO_FN(LCD0_D18_PORT40), GPIO_FN(LCD0_D19_PORT4), - GPIO_FN(LCD0_D20_PORT3), GPIO_FN(LCD0_D21_PORT2), - GPIO_FN(LCD0_D22_PORT0), GPIO_FN(LCD0_D23_PORT1), - GPIO_FN(LCD0_LCLK_PORT102), /* MSEL5CR_6_0 */ - - /* LCD1 */ - GPIO_FN(LCD1_D0), GPIO_FN(LCD1_D1), GPIO_FN(LCD1_D2), - GPIO_FN(LCD1_D3), GPIO_FN(LCD1_D4), GPIO_FN(LCD1_D5), - GPIO_FN(LCD1_D6), GPIO_FN(LCD1_D7), GPIO_FN(LCD1_D8), - GPIO_FN(LCD1_D9), GPIO_FN(LCD1_D10), GPIO_FN(LCD1_D11), - GPIO_FN(LCD1_D12), GPIO_FN(LCD1_D13), GPIO_FN(LCD1_D14), - GPIO_FN(LCD1_D15), GPIO_FN(LCD1_D16), GPIO_FN(LCD1_D17), - GPIO_FN(LCD1_D18), GPIO_FN(LCD1_D19), GPIO_FN(LCD1_D20), - GPIO_FN(LCD1_D21), GPIO_FN(LCD1_D22), GPIO_FN(LCD1_D23), - GPIO_FN(LCD1_RS), GPIO_FN(LCD1_RD), GPIO_FN(LCD1_CS), - GPIO_FN(LCD1_WR), GPIO_FN(LCD1_DCK), GPIO_FN(LCD1_DON), - GPIO_FN(LCD1_VCPWC), GPIO_FN(LCD1_LCLK), GPIO_FN(LCD1_HSYN), - GPIO_FN(LCD1_VSYN), GPIO_FN(LCD1_VEPWC), GPIO_FN(LCD1_DISP), - - /* RSPI */ - GPIO_FN(RSPI_SSL0_A), GPIO_FN(RSPI_SSL1_A), GPIO_FN(RSPI_SSL2_A), - GPIO_FN(RSPI_SSL3_A), GPIO_FN(RSPI_CK_A), GPIO_FN(RSPI_MOSI_A), - GPIO_FN(RSPI_MISO_A), - - /* VIO CKO */ - GPIO_FN(VIO_CKO1), - GPIO_FN(VIO_CKO2), - GPIO_FN(VIO_CKO_1), - GPIO_FN(VIO_CKO), - - /* VIO0 */ - GPIO_FN(VIO0_D0), GPIO_FN(VIO0_D1), GPIO_FN(VIO0_D2), - GPIO_FN(VIO0_D3), GPIO_FN(VIO0_D4), GPIO_FN(VIO0_D5), - GPIO_FN(VIO0_D6), GPIO_FN(VIO0_D7), GPIO_FN(VIO0_D8), - GPIO_FN(VIO0_D9), GPIO_FN(VIO0_D10), GPIO_FN(VIO0_D11), - GPIO_FN(VIO0_D12), GPIO_FN(VIO0_VD), GPIO_FN(VIO0_HD), - GPIO_FN(VIO0_CLK), GPIO_FN(VIO0_FIELD), - - GPIO_FN(VIO0_D13_PORT26), /* MSEL5CR_27_0 */ - GPIO_FN(VIO0_D14_PORT25), - GPIO_FN(VIO0_D15_PORT24), - - GPIO_FN(VIO0_D13_PORT22), /* MSEL5CR_27_1 */ - GPIO_FN(VIO0_D14_PORT95), - GPIO_FN(VIO0_D15_PORT96), - - /* VIO1 */ - GPIO_FN(VIO1_D0), GPIO_FN(VIO1_D1), GPIO_FN(VIO1_D2), - GPIO_FN(VIO1_D3), GPIO_FN(VIO1_D4), GPIO_FN(VIO1_D5), - GPIO_FN(VIO1_D6), GPIO_FN(VIO1_D7), GPIO_FN(VIO1_VD), - GPIO_FN(VIO1_HD), GPIO_FN(VIO1_CLK), GPIO_FN(VIO1_FIELD), - - /* TPU0 */ - GPIO_FN(TPU0TO0), GPIO_FN(TPU0TO1), GPIO_FN(TPU0TO3), - GPIO_FN(TPU0TO2_PORT66), /* TPU0TO2 Port 66/202 */ - GPIO_FN(TPU0TO2_PORT202), - - /* SSP1 0 */ - GPIO_FN(STP0_IPD0), GPIO_FN(STP0_IPD1), GPIO_FN(STP0_IPD2), - GPIO_FN(STP0_IPD3), GPIO_FN(STP0_IPD4), GPIO_FN(STP0_IPD5), - GPIO_FN(STP0_IPD6), GPIO_FN(STP0_IPD7), GPIO_FN(STP0_IPEN), - GPIO_FN(STP0_IPCLK), GPIO_FN(STP0_IPSYNC), - - /* SSP1 1 */ - GPIO_FN(STP1_IPD1), GPIO_FN(STP1_IPD2), GPIO_FN(STP1_IPD3), - GPIO_FN(STP1_IPD4), GPIO_FN(STP1_IPD5), GPIO_FN(STP1_IPD6), - GPIO_FN(STP1_IPD7), GPIO_FN(STP1_IPCLK), GPIO_FN(STP1_IPSYNC), - - GPIO_FN(STP1_IPD0_PORT186), /* MSEL5CR_23_0 */ - GPIO_FN(STP1_IPEN_PORT187), - - GPIO_FN(STP1_IPD0_PORT194), /* MSEL5CR_23_1 */ - GPIO_FN(STP1_IPEN_PORT193), - - /* SIM */ - GPIO_FN(SIM_RST), GPIO_FN(SIM_CLK), - GPIO_FN(SIM_D_PORT22), /* SIM_D Port 22/199 */ - GPIO_FN(SIM_D_PORT199), - - /* SDHI0 */ - GPIO_FN(SDHI0_D0), GPIO_FN(SDHI0_D1), GPIO_FN(SDHI0_D2), - GPIO_FN(SDHI0_D3), GPIO_FN(SDHI0_CD), GPIO_FN(SDHI0_WP), - GPIO_FN(SDHI0_CMD), GPIO_FN(SDHI0_CLK), - - /* SDHI1 */ - GPIO_FN(SDHI1_D0), GPIO_FN(SDHI1_D1), GPIO_FN(SDHI1_D2), - GPIO_FN(SDHI1_D3), GPIO_FN(SDHI1_CD), GPIO_FN(SDHI1_WP), - GPIO_FN(SDHI1_CMD), GPIO_FN(SDHI1_CLK), - - /* SDHI2 */ - GPIO_FN(SDHI2_D0), GPIO_FN(SDHI2_D1), GPIO_FN(SDHI2_D2), - GPIO_FN(SDHI2_D3), GPIO_FN(SDHI2_CLK), GPIO_FN(SDHI2_CMD), - - GPIO_FN(SDHI2_CD_PORT24), /* MSEL5CR_19_0 */ - GPIO_FN(SDHI2_WP_PORT25), - - GPIO_FN(SDHI2_WP_PORT177), /* MSEL5CR_19_1 */ - GPIO_FN(SDHI2_CD_PORT202), - - /* MSIOF2 */ - GPIO_FN(MSIOF2_TXD), GPIO_FN(MSIOF2_RXD), GPIO_FN(MSIOF2_TSCK), - GPIO_FN(MSIOF2_SS2), GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_SS1), - GPIO_FN(MSIOF2_MCK1), GPIO_FN(MSIOF2_MCK0), GPIO_FN(MSIOF2_RSYNC), - GPIO_FN(MSIOF2_RSCK), - - /* KEYSC */ - GPIO_FN(KEYIN4), GPIO_FN(KEYIN5), - GPIO_FN(KEYIN6), GPIO_FN(KEYIN7), - GPIO_FN(KEYOUT0), GPIO_FN(KEYOUT1), GPIO_FN(KEYOUT2), - GPIO_FN(KEYOUT3), GPIO_FN(KEYOUT4), GPIO_FN(KEYOUT5), - GPIO_FN(KEYOUT6), GPIO_FN(KEYOUT7), - - GPIO_FN(KEYIN0_PORT43), /* MSEL4CR_18_0 */ - GPIO_FN(KEYIN1_PORT44), - GPIO_FN(KEYIN2_PORT45), - GPIO_FN(KEYIN3_PORT46), - - GPIO_FN(KEYIN0_PORT58), /* MSEL4CR_18_1 */ - GPIO_FN(KEYIN1_PORT57), - GPIO_FN(KEYIN2_PORT56), - GPIO_FN(KEYIN3_PORT55), - - /* VOU */ - GPIO_FN(DV_D0), GPIO_FN(DV_D1), GPIO_FN(DV_D2), - GPIO_FN(DV_D3), GPIO_FN(DV_D4), GPIO_FN(DV_D5), - GPIO_FN(DV_D6), GPIO_FN(DV_D7), GPIO_FN(DV_D8), - GPIO_FN(DV_D9), GPIO_FN(DV_D10), GPIO_FN(DV_D11), - GPIO_FN(DV_D12), GPIO_FN(DV_D13), GPIO_FN(DV_D14), - GPIO_FN(DV_D15), GPIO_FN(DV_CLK), - GPIO_FN(DV_VSYNC), GPIO_FN(DV_HSYNC), - - /* MEMC */ - GPIO_FN(MEMC_AD0), GPIO_FN(MEMC_AD1), GPIO_FN(MEMC_AD2), - GPIO_FN(MEMC_AD3), GPIO_FN(MEMC_AD4), GPIO_FN(MEMC_AD5), - GPIO_FN(MEMC_AD6), GPIO_FN(MEMC_AD7), GPIO_FN(MEMC_AD8), - GPIO_FN(MEMC_AD9), GPIO_FN(MEMC_AD10), GPIO_FN(MEMC_AD11), - GPIO_FN(MEMC_AD12), GPIO_FN(MEMC_AD13), GPIO_FN(MEMC_AD14), - GPIO_FN(MEMC_AD15), GPIO_FN(MEMC_CS0), GPIO_FN(MEMC_INT), - GPIO_FN(MEMC_NWE), GPIO_FN(MEMC_NOE), GPIO_FN(MEMC_CS1), - GPIO_FN(MEMC_A1), GPIO_FN(MEMC_ADV), GPIO_FN(MEMC_DREQ0), - GPIO_FN(MEMC_WAIT), GPIO_FN(MEMC_DREQ1), GPIO_FN(MEMC_BUSCLK), - GPIO_FN(MEMC_A0), - - /* MMC */ - GPIO_FN(MMC0_D0_PORT68), GPIO_FN(MMC0_D1_PORT69), - GPIO_FN(MMC0_D2_PORT70), GPIO_FN(MMC0_D3_PORT71), - GPIO_FN(MMC0_D4_PORT72), GPIO_FN(MMC0_D5_PORT73), - GPIO_FN(MMC0_D6_PORT74), GPIO_FN(MMC0_D7_PORT75), - GPIO_FN(MMC0_CLK_PORT66), - GPIO_FN(MMC0_CMD_PORT67), /* MSEL4CR_15_0 */ - - GPIO_FN(MMC1_D0_PORT149), GPIO_FN(MMC1_D1_PORT148), - GPIO_FN(MMC1_D2_PORT147), GPIO_FN(MMC1_D3_PORT146), - GPIO_FN(MMC1_D4_PORT145), GPIO_FN(MMC1_D5_PORT144), - GPIO_FN(MMC1_D6_PORT143), GPIO_FN(MMC1_D7_PORT142), - GPIO_FN(MMC1_CLK_PORT103), - GPIO_FN(MMC1_CMD_PORT104), /* MSEL4CR_15_1 */ - - /* MSIOF0 */ - GPIO_FN(MSIOF0_SS1), GPIO_FN(MSIOF0_SS2), GPIO_FN(MSIOF0_RXD), - GPIO_FN(MSIOF0_TXD), GPIO_FN(MSIOF0_MCK0), GPIO_FN(MSIOF0_MCK1), - GPIO_FN(MSIOF0_RSYNC), GPIO_FN(MSIOF0_RSCK), GPIO_FN(MSIOF0_TSCK), - GPIO_FN(MSIOF0_TSYNC), - - /* MSIOF1 */ - GPIO_FN(MSIOF1_RSCK), GPIO_FN(MSIOF1_RSYNC), - GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1), - - GPIO_FN(MSIOF1_SS2_PORT116), GPIO_FN(MSIOF1_SS1_PORT117), - GPIO_FN(MSIOF1_RXD_PORT118), GPIO_FN(MSIOF1_TXD_PORT119), - GPIO_FN(MSIOF1_TSYNC_PORT120), - GPIO_FN(MSIOF1_TSCK_PORT121), /* MSEL4CR_10_0 */ - - GPIO_FN(MSIOF1_SS1_PORT67), GPIO_FN(MSIOF1_TSCK_PORT72), - GPIO_FN(MSIOF1_TSYNC_PORT73), GPIO_FN(MSIOF1_TXD_PORT74), - GPIO_FN(MSIOF1_RXD_PORT75), - GPIO_FN(MSIOF1_SS2_PORT202), /* MSEL4CR_10_1 */ - - /* GPIO */ - GPIO_FN(GPO0), GPIO_FN(GPI0), - GPIO_FN(GPO1), GPIO_FN(GPI1), - - /* USB0 */ - GPIO_FN(USB0_OCI), GPIO_FN(USB0_PPON), GPIO_FN(VBUS), - - /* USB1 */ - GPIO_FN(USB1_OCI), GPIO_FN(USB1_PPON), - - /* BBIF1 */ - GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_TSYNC), - GPIO_FN(BBIF1_TSCK), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC), - GPIO_FN(BBIF1_FLOW), GPIO_FN(BBIF1_RX_FLOW_N), - - /* BBIF2 */ - GPIO_FN(BBIF2_TXD2_PORT5), /* MSEL5CR_0_0 */ - GPIO_FN(BBIF2_RXD2_PORT60), - GPIO_FN(BBIF2_TSYNC2_PORT6), - GPIO_FN(BBIF2_TSCK2_PORT59), - - GPIO_FN(BBIF2_RXD2_PORT90), /* MSEL5CR_0_1 */ - GPIO_FN(BBIF2_TXD2_PORT183), - GPIO_FN(BBIF2_TSCK2_PORT89), - GPIO_FN(BBIF2_TSYNC2_PORT184), - - /* BSC / FLCTL / PCMCIA */ - GPIO_FN(CS0), GPIO_FN(CS2), GPIO_FN(CS4), - GPIO_FN(CS5B), GPIO_FN(CS6A), - GPIO_FN(CS5A_PORT105), /* CS5A PORT 19/105 */ - GPIO_FN(CS5A_PORT19), - GPIO_FN(IOIS16), /* ? */ - - GPIO_FN(A0), GPIO_FN(A1), GPIO_FN(A2), GPIO_FN(A3), - GPIO_FN(A4_FOE), GPIO_FN(A5_FCDE), /* share with FLCTL */ - GPIO_FN(A6), GPIO_FN(A7), GPIO_FN(A8), GPIO_FN(A9), - GPIO_FN(A10), GPIO_FN(A11), GPIO_FN(A12), GPIO_FN(A13), - GPIO_FN(A14), GPIO_FN(A15), GPIO_FN(A16), GPIO_FN(A17), - GPIO_FN(A18), GPIO_FN(A19), GPIO_FN(A20), GPIO_FN(A21), - GPIO_FN(A22), GPIO_FN(A23), GPIO_FN(A24), GPIO_FN(A25), - GPIO_FN(A26), - - GPIO_FN(D0_NAF0), GPIO_FN(D1_NAF1), /* share with FLCTL */ - GPIO_FN(D2_NAF2), GPIO_FN(D3_NAF3), /* share with FLCTL */ - GPIO_FN(D4_NAF4), GPIO_FN(D5_NAF5), /* share with FLCTL */ - GPIO_FN(D6_NAF6), GPIO_FN(D7_NAF7), /* share with FLCTL */ - GPIO_FN(D8_NAF8), GPIO_FN(D9_NAF9), /* share with FLCTL */ - GPIO_FN(D10_NAF10), GPIO_FN(D11_NAF11), /* share with FLCTL */ - GPIO_FN(D12_NAF12), GPIO_FN(D13_NAF13), /* share with FLCTL */ - GPIO_FN(D14_NAF14), GPIO_FN(D15_NAF15), /* share with FLCTL */ - GPIO_FN(D16), GPIO_FN(D17), GPIO_FN(D18), GPIO_FN(D19), - GPIO_FN(D20), GPIO_FN(D21), GPIO_FN(D22), GPIO_FN(D23), - GPIO_FN(D24), GPIO_FN(D25), GPIO_FN(D26), GPIO_FN(D27), - GPIO_FN(D28), GPIO_FN(D29), GPIO_FN(D30), GPIO_FN(D31), - - GPIO_FN(WE0_FWE), /* share with FLCTL */ - GPIO_FN(WE1), - GPIO_FN(WE2_ICIORD), /* share with PCMCIA */ - GPIO_FN(WE3_ICIOWR), /* share with PCMCIA */ - GPIO_FN(CKO), GPIO_FN(BS), GPIO_FN(RDWR), - GPIO_FN(RD_FSC), /* share with FLCTL */ - GPIO_FN(WAIT_PORT177), /* WAIT Port 90/177 */ - GPIO_FN(WAIT_PORT90), - - GPIO_FN(FCE0), GPIO_FN(FCE1), GPIO_FN(FRB), /* FLCTL */ - - /* IRDA */ - GPIO_FN(IRDA_FIRSEL), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_OUT), - - /* ATAPI */ - GPIO_FN(IDE_D0), GPIO_FN(IDE_D1), GPIO_FN(IDE_D2), - GPIO_FN(IDE_D3), GPIO_FN(IDE_D4), GPIO_FN(IDE_D5), - GPIO_FN(IDE_D6), GPIO_FN(IDE_D7), GPIO_FN(IDE_D8), - GPIO_FN(IDE_D9), GPIO_FN(IDE_D10), GPIO_FN(IDE_D11), - GPIO_FN(IDE_D12), GPIO_FN(IDE_D13), GPIO_FN(IDE_D14), - GPIO_FN(IDE_D15), GPIO_FN(IDE_A0), GPIO_FN(IDE_A1), - GPIO_FN(IDE_A2), GPIO_FN(IDE_CS0), GPIO_FN(IDE_CS1), - GPIO_FN(IDE_IOWR), GPIO_FN(IDE_IORD), GPIO_FN(IDE_IORDY), - GPIO_FN(IDE_INT), GPIO_FN(IDE_RST), GPIO_FN(IDE_DIRECTION), - GPIO_FN(IDE_EXBUF_ENB), GPIO_FN(IDE_IODACK), GPIO_FN(IDE_IODREQ), - - /* RMII */ - GPIO_FN(RMII_CRS_DV), GPIO_FN(RMII_RX_ER), GPIO_FN(RMII_RXD0), - GPIO_FN(RMII_RXD1), GPIO_FN(RMII_TX_EN), GPIO_FN(RMII_TXD0), - GPIO_FN(RMII_MDC), GPIO_FN(RMII_TXD1), GPIO_FN(RMII_MDIO), - GPIO_FN(RMII_REF50CK), GPIO_FN(RMII_REF125CK), /* for GMII */ - - /* GEther */ - GPIO_FN(ET_TX_CLK), GPIO_FN(ET_TX_EN), GPIO_FN(ET_ETXD0), - GPIO_FN(ET_ETXD1), GPIO_FN(ET_ETXD2), GPIO_FN(ET_ETXD3), - GPIO_FN(ET_ETXD4), GPIO_FN(ET_ETXD5), /* for GEther */ - GPIO_FN(ET_ETXD6), GPIO_FN(ET_ETXD7), /* for GEther */ - GPIO_FN(ET_COL), GPIO_FN(ET_TX_ER), GPIO_FN(ET_RX_CLK), - GPIO_FN(ET_RX_DV), GPIO_FN(ET_ERXD0), GPIO_FN(ET_ERXD1), - GPIO_FN(ET_ERXD2), GPIO_FN(ET_ERXD3), - GPIO_FN(ET_ERXD4), GPIO_FN(ET_ERXD5), /* for GEther */ - GPIO_FN(ET_ERXD6), GPIO_FN(ET_ERXD7), /* for GEther */ - GPIO_FN(ET_RX_ER), GPIO_FN(ET_CRS), GPIO_FN(ET_MDC), - GPIO_FN(ET_MDIO), GPIO_FN(ET_LINK), GPIO_FN(ET_PHY_INT), - GPIO_FN(ET_WOL), GPIO_FN(ET_GTX_CLK), - - /* DMA0 */ - GPIO_FN(DREQ0), GPIO_FN(DACK0), - - /* DMA1 */ - GPIO_FN(DREQ1), GPIO_FN(DACK1), - - /* SYSC */ - GPIO_FN(RESETOUTS), - - /* IRREM */ - GPIO_FN(IROUT), - - /* LCDC */ - GPIO_FN(LCDC0_SELECT), - GPIO_FN(LCDC1_SELECT), - - /* SDENC */ - GPIO_FN(SDENC_CPG), - GPIO_FN(SDENC_DV_CLKI), - - /* HDMI */ - GPIO_FN(HDMI_HPD), - GPIO_FN(HDMI_CEC), - - /* SYSC */ - GPIO_FN(RESETP_PULLUP), - GPIO_FN(RESETP_PLAIN), - - /* DEBUG */ - GPIO_FN(EDEBGREQ_PULLDOWN), - GPIO_FN(EDEBGREQ_PULLUP), - - GPIO_FN(TRACEAUD_FROM_VIO), - GPIO_FN(TRACEAUD_FROM_LCDC0), - GPIO_FN(TRACEAUD_FROM_MEMC), -}; - -static struct pinmux_cfg_reg pinmux_config_regs[] = { - PORTCR(0, 0xe6050000), /* PORT0CR */ - PORTCR(1, 0xe6050001), /* PORT1CR */ - PORTCR(2, 0xe6050002), /* PORT2CR */ - PORTCR(3, 0xe6050003), /* PORT3CR */ - PORTCR(4, 0xe6050004), /* PORT4CR */ - PORTCR(5, 0xe6050005), /* PORT5CR */ - PORTCR(6, 0xe6050006), /* PORT6CR */ - PORTCR(7, 0xe6050007), /* PORT7CR */ - PORTCR(8, 0xe6050008), /* PORT8CR */ - PORTCR(9, 0xe6050009), /* PORT9CR */ - PORTCR(10, 0xe605000a), /* PORT10CR */ - PORTCR(11, 0xe605000b), /* PORT11CR */ - PORTCR(12, 0xe605000c), /* PORT12CR */ - PORTCR(13, 0xe605000d), /* PORT13CR */ - PORTCR(14, 0xe605000e), /* PORT14CR */ - PORTCR(15, 0xe605000f), /* PORT15CR */ - PORTCR(16, 0xe6050010), /* PORT16CR */ - PORTCR(17, 0xe6050011), /* PORT17CR */ - PORTCR(18, 0xe6050012), /* PORT18CR */ - PORTCR(19, 0xe6050013), /* PORT19CR */ - PORTCR(20, 0xe6050014), /* PORT20CR */ - PORTCR(21, 0xe6050015), /* PORT21CR */ - PORTCR(22, 0xe6050016), /* PORT22CR */ - PORTCR(23, 0xe6050017), /* PORT23CR */ - PORTCR(24, 0xe6050018), /* PORT24CR */ - PORTCR(25, 0xe6050019), /* PORT25CR */ - PORTCR(26, 0xe605001a), /* PORT26CR */ - PORTCR(27, 0xe605001b), /* PORT27CR */ - PORTCR(28, 0xe605001c), /* PORT28CR */ - PORTCR(29, 0xe605001d), /* PORT29CR */ - PORTCR(30, 0xe605001e), /* PORT30CR */ - PORTCR(31, 0xe605001f), /* PORT31CR */ - PORTCR(32, 0xe6050020), /* PORT32CR */ - PORTCR(33, 0xe6050021), /* PORT33CR */ - PORTCR(34, 0xe6050022), /* PORT34CR */ - PORTCR(35, 0xe6050023), /* PORT35CR */ - PORTCR(36, 0xe6050024), /* PORT36CR */ - PORTCR(37, 0xe6050025), /* PORT37CR */ - PORTCR(38, 0xe6050026), /* PORT38CR */ - PORTCR(39, 0xe6050027), /* PORT39CR */ - PORTCR(40, 0xe6050028), /* PORT40CR */ - PORTCR(41, 0xe6050029), /* PORT41CR */ - PORTCR(42, 0xe605002a), /* PORT42CR */ - PORTCR(43, 0xe605002b), /* PORT43CR */ - PORTCR(44, 0xe605002c), /* PORT44CR */ - PORTCR(45, 0xe605002d), /* PORT45CR */ - PORTCR(46, 0xe605002e), /* PORT46CR */ - PORTCR(47, 0xe605002f), /* PORT47CR */ - PORTCR(48, 0xe6050030), /* PORT48CR */ - PORTCR(49, 0xe6050031), /* PORT49CR */ - PORTCR(50, 0xe6050032), /* PORT50CR */ - PORTCR(51, 0xe6050033), /* PORT51CR */ - PORTCR(52, 0xe6050034), /* PORT52CR */ - PORTCR(53, 0xe6050035), /* PORT53CR */ - PORTCR(54, 0xe6050036), /* PORT54CR */ - PORTCR(55, 0xe6050037), /* PORT55CR */ - PORTCR(56, 0xe6050038), /* PORT56CR */ - PORTCR(57, 0xe6050039), /* PORT57CR */ - PORTCR(58, 0xe605003a), /* PORT58CR */ - PORTCR(59, 0xe605003b), /* PORT59CR */ - PORTCR(60, 0xe605003c), /* PORT60CR */ - PORTCR(61, 0xe605003d), /* PORT61CR */ - PORTCR(62, 0xe605003e), /* PORT62CR */ - PORTCR(63, 0xe605003f), /* PORT63CR */ - PORTCR(64, 0xe6050040), /* PORT64CR */ - PORTCR(65, 0xe6050041), /* PORT65CR */ - PORTCR(66, 0xe6050042), /* PORT66CR */ - PORTCR(67, 0xe6050043), /* PORT67CR */ - PORTCR(68, 0xe6050044), /* PORT68CR */ - PORTCR(69, 0xe6050045), /* PORT69CR */ - PORTCR(70, 0xe6050046), /* PORT70CR */ - PORTCR(71, 0xe6050047), /* PORT71CR */ - PORTCR(72, 0xe6050048), /* PORT72CR */ - PORTCR(73, 0xe6050049), /* PORT73CR */ - PORTCR(74, 0xe605004a), /* PORT74CR */ - PORTCR(75, 0xe605004b), /* PORT75CR */ - PORTCR(76, 0xe605004c), /* PORT76CR */ - PORTCR(77, 0xe605004d), /* PORT77CR */ - PORTCR(78, 0xe605004e), /* PORT78CR */ - PORTCR(79, 0xe605004f), /* PORT79CR */ - PORTCR(80, 0xe6050050), /* PORT80CR */ - PORTCR(81, 0xe6050051), /* PORT81CR */ - PORTCR(82, 0xe6050052), /* PORT82CR */ - PORTCR(83, 0xe6050053), /* PORT83CR */ - - PORTCR(84, 0xe6051054), /* PORT84CR */ - PORTCR(85, 0xe6051055), /* PORT85CR */ - PORTCR(86, 0xe6051056), /* PORT86CR */ - PORTCR(87, 0xe6051057), /* PORT87CR */ - PORTCR(88, 0xe6051058), /* PORT88CR */ - PORTCR(89, 0xe6051059), /* PORT89CR */ - PORTCR(90, 0xe605105a), /* PORT90CR */ - PORTCR(91, 0xe605105b), /* PORT91CR */ - PORTCR(92, 0xe605105c), /* PORT92CR */ - PORTCR(93, 0xe605105d), /* PORT93CR */ - PORTCR(94, 0xe605105e), /* PORT94CR */ - PORTCR(95, 0xe605105f), /* PORT95CR */ - PORTCR(96, 0xe6051060), /* PORT96CR */ - PORTCR(97, 0xe6051061), /* PORT97CR */ - PORTCR(98, 0xe6051062), /* PORT98CR */ - PORTCR(99, 0xe6051063), /* PORT99CR */ - PORTCR(100, 0xe6051064), /* PORT100CR */ - PORTCR(101, 0xe6051065), /* PORT101CR */ - PORTCR(102, 0xe6051066), /* PORT102CR */ - PORTCR(103, 0xe6051067), /* PORT103CR */ - PORTCR(104, 0xe6051068), /* PORT104CR */ - PORTCR(105, 0xe6051069), /* PORT105CR */ - PORTCR(106, 0xe605106a), /* PORT106CR */ - PORTCR(107, 0xe605106b), /* PORT107CR */ - PORTCR(108, 0xe605106c), /* PORT108CR */ - PORTCR(109, 0xe605106d), /* PORT109CR */ - PORTCR(110, 0xe605106e), /* PORT110CR */ - PORTCR(111, 0xe605106f), /* PORT111CR */ - PORTCR(112, 0xe6051070), /* PORT112CR */ - PORTCR(113, 0xe6051071), /* PORT113CR */ - PORTCR(114, 0xe6051072), /* PORT114CR */ - - PORTCR(115, 0xe6052073), /* PORT115CR */ - PORTCR(116, 0xe6052074), /* PORT116CR */ - PORTCR(117, 0xe6052075), /* PORT117CR */ - PORTCR(118, 0xe6052076), /* PORT118CR */ - PORTCR(119, 0xe6052077), /* PORT119CR */ - PORTCR(120, 0xe6052078), /* PORT120CR */ - PORTCR(121, 0xe6052079), /* PORT121CR */ - PORTCR(122, 0xe605207a), /* PORT122CR */ - PORTCR(123, 0xe605207b), /* PORT123CR */ - PORTCR(124, 0xe605207c), /* PORT124CR */ - PORTCR(125, 0xe605207d), /* PORT125CR */ - PORTCR(126, 0xe605207e), /* PORT126CR */ - PORTCR(127, 0xe605207f), /* PORT127CR */ - PORTCR(128, 0xe6052080), /* PORT128CR */ - PORTCR(129, 0xe6052081), /* PORT129CR */ - PORTCR(130, 0xe6052082), /* PORT130CR */ - PORTCR(131, 0xe6052083), /* PORT131CR */ - PORTCR(132, 0xe6052084), /* PORT132CR */ - PORTCR(133, 0xe6052085), /* PORT133CR */ - PORTCR(134, 0xe6052086), /* PORT134CR */ - PORTCR(135, 0xe6052087), /* PORT135CR */ - PORTCR(136, 0xe6052088), /* PORT136CR */ - PORTCR(137, 0xe6052089), /* PORT137CR */ - PORTCR(138, 0xe605208a), /* PORT138CR */ - PORTCR(139, 0xe605208b), /* PORT139CR */ - PORTCR(140, 0xe605208c), /* PORT140CR */ - PORTCR(141, 0xe605208d), /* PORT141CR */ - PORTCR(142, 0xe605208e), /* PORT142CR */ - PORTCR(143, 0xe605208f), /* PORT143CR */ - PORTCR(144, 0xe6052090), /* PORT144CR */ - PORTCR(145, 0xe6052091), /* PORT145CR */ - PORTCR(146, 0xe6052092), /* PORT146CR */ - PORTCR(147, 0xe6052093), /* PORT147CR */ - PORTCR(148, 0xe6052094), /* PORT148CR */ - PORTCR(149, 0xe6052095), /* PORT149CR */ - PORTCR(150, 0xe6052096), /* PORT150CR */ - PORTCR(151, 0xe6052097), /* PORT151CR */ - PORTCR(152, 0xe6052098), /* PORT152CR */ - PORTCR(153, 0xe6052099), /* PORT153CR */ - PORTCR(154, 0xe605209a), /* PORT154CR */ - PORTCR(155, 0xe605209b), /* PORT155CR */ - PORTCR(156, 0xe605209c), /* PORT156CR */ - PORTCR(157, 0xe605209d), /* PORT157CR */ - PORTCR(158, 0xe605209e), /* PORT158CR */ - PORTCR(159, 0xe605209f), /* PORT159CR */ - PORTCR(160, 0xe60520a0), /* PORT160CR */ - PORTCR(161, 0xe60520a1), /* PORT161CR */ - PORTCR(162, 0xe60520a2), /* PORT162CR */ - PORTCR(163, 0xe60520a3), /* PORT163CR */ - PORTCR(164, 0xe60520a4), /* PORT164CR */ - PORTCR(165, 0xe60520a5), /* PORT165CR */ - PORTCR(166, 0xe60520a6), /* PORT166CR */ - PORTCR(167, 0xe60520a7), /* PORT167CR */ - PORTCR(168, 0xe60520a8), /* PORT168CR */ - PORTCR(169, 0xe60520a9), /* PORT169CR */ - PORTCR(170, 0xe60520aa), /* PORT170CR */ - PORTCR(171, 0xe60520ab), /* PORT171CR */ - PORTCR(172, 0xe60520ac), /* PORT172CR */ - PORTCR(173, 0xe60520ad), /* PORT173CR */ - PORTCR(174, 0xe60520ae), /* PORT174CR */ - PORTCR(175, 0xe60520af), /* PORT175CR */ - PORTCR(176, 0xe60520b0), /* PORT176CR */ - PORTCR(177, 0xe60520b1), /* PORT177CR */ - PORTCR(178, 0xe60520b2), /* PORT178CR */ - PORTCR(179, 0xe60520b3), /* PORT179CR */ - PORTCR(180, 0xe60520b4), /* PORT180CR */ - PORTCR(181, 0xe60520b5), /* PORT181CR */ - PORTCR(182, 0xe60520b6), /* PORT182CR */ - PORTCR(183, 0xe60520b7), /* PORT183CR */ - PORTCR(184, 0xe60520b8), /* PORT184CR */ - PORTCR(185, 0xe60520b9), /* PORT185CR */ - PORTCR(186, 0xe60520ba), /* PORT186CR */ - PORTCR(187, 0xe60520bb), /* PORT187CR */ - PORTCR(188, 0xe60520bc), /* PORT188CR */ - PORTCR(189, 0xe60520bd), /* PORT189CR */ - PORTCR(190, 0xe60520be), /* PORT190CR */ - PORTCR(191, 0xe60520bf), /* PORT191CR */ - PORTCR(192, 0xe60520c0), /* PORT192CR */ - PORTCR(193, 0xe60520c1), /* PORT193CR */ - PORTCR(194, 0xe60520c2), /* PORT194CR */ - PORTCR(195, 0xe60520c3), /* PORT195CR */ - PORTCR(196, 0xe60520c4), /* PORT196CR */ - PORTCR(197, 0xe60520c5), /* PORT197CR */ - PORTCR(198, 0xe60520c6), /* PORT198CR */ - PORTCR(199, 0xe60520c7), /* PORT199CR */ - PORTCR(200, 0xe60520c8), /* PORT200CR */ - PORTCR(201, 0xe60520c9), /* PORT201CR */ - PORTCR(202, 0xe60520ca), /* PORT202CR */ - PORTCR(203, 0xe60520cb), /* PORT203CR */ - PORTCR(204, 0xe60520cc), /* PORT204CR */ - PORTCR(205, 0xe60520cd), /* PORT205CR */ - PORTCR(206, 0xe60520ce), /* PORT206CR */ - PORTCR(207, 0xe60520cf), /* PORT207CR */ - PORTCR(208, 0xe60520d0), /* PORT208CR */ - PORTCR(209, 0xe60520d1), /* PORT209CR */ - - PORTCR(210, 0xe60530d2), /* PORT210CR */ - PORTCR(211, 0xe60530d3), /* PORT211CR */ - - { PINMUX_CFG_REG("MSEL1CR", 0xe605800c, 32, 1) { - MSEL1CR_31_0, MSEL1CR_31_1, - MSEL1CR_30_0, MSEL1CR_30_1, - MSEL1CR_29_0, MSEL1CR_29_1, - MSEL1CR_28_0, MSEL1CR_28_1, - MSEL1CR_27_0, MSEL1CR_27_1, - MSEL1CR_26_0, MSEL1CR_26_1, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - MSEL1CR_16_0, MSEL1CR_16_1, - MSEL1CR_15_0, MSEL1CR_15_1, - MSEL1CR_14_0, MSEL1CR_14_1, - MSEL1CR_13_0, MSEL1CR_13_1, - MSEL1CR_12_0, MSEL1CR_12_1, - 0, 0, 0, 0, - MSEL1CR_9_0, MSEL1CR_9_1, - 0, 0, - MSEL1CR_7_0, MSEL1CR_7_1, - MSEL1CR_6_0, MSEL1CR_6_1, - MSEL1CR_5_0, MSEL1CR_5_1, - MSEL1CR_4_0, MSEL1CR_4_1, - MSEL1CR_3_0, MSEL1CR_3_1, - MSEL1CR_2_0, MSEL1CR_2_1, - 0, 0, - MSEL1CR_0_0, MSEL1CR_0_1, - } - }, - { PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) { - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - MSEL3CR_15_0, MSEL3CR_15_1, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - MSEL3CR_6_0, MSEL3CR_6_1, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, - } - }, - { PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) { - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - MSEL4CR_19_0, MSEL4CR_19_1, - MSEL4CR_18_0, MSEL4CR_18_1, - 0, 0, 0, 0, - MSEL4CR_15_0, MSEL4CR_15_1, - 0, 0, 0, 0, 0, 0, 0, 0, - MSEL4CR_10_0, MSEL4CR_10_1, - 0, 0, 0, 0, 0, 0, - MSEL4CR_6_0, MSEL4CR_6_1, - 0, 0, - MSEL4CR_4_0, MSEL4CR_4_1, - 0, 0, 0, 0, - MSEL4CR_1_0, MSEL4CR_1_1, - 0, 0, - } - }, - { PINMUX_CFG_REG("MSEL5CR", 0xE6058028, 32, 1) { - MSEL5CR_31_0, MSEL5CR_31_1, - MSEL5CR_30_0, MSEL5CR_30_1, - MSEL5CR_29_0, MSEL5CR_29_1, - 0, 0, - MSEL5CR_27_0, MSEL5CR_27_1, - 0, 0, - MSEL5CR_25_0, MSEL5CR_25_1, - 0, 0, - MSEL5CR_23_0, MSEL5CR_23_1, - 0, 0, - MSEL5CR_21_0, MSEL5CR_21_1, - 0, 0, - MSEL5CR_19_0, MSEL5CR_19_1, - 0, 0, - MSEL5CR_17_0, MSEL5CR_17_1, - 0, 0, - MSEL5CR_15_0, MSEL5CR_15_1, - MSEL5CR_14_0, MSEL5CR_14_1, - MSEL5CR_13_0, MSEL5CR_13_1, - MSEL5CR_12_0, MSEL5CR_12_1, - MSEL5CR_11_0, MSEL5CR_11_1, - MSEL5CR_10_0, MSEL5CR_10_1, - 0, 0, - MSEL5CR_8_0, MSEL5CR_8_1, - MSEL5CR_7_0, MSEL5CR_7_1, - MSEL5CR_6_0, MSEL5CR_6_1, - MSEL5CR_5_0, MSEL5CR_5_1, - MSEL5CR_4_0, MSEL5CR_4_1, - MSEL5CR_3_0, MSEL5CR_3_1, - MSEL5CR_2_0, MSEL5CR_2_1, - 0, 0, - MSEL5CR_0_0, MSEL5CR_0_1, - } - }, - { }, -}; - -static struct pinmux_data_reg pinmux_data_regs[] = { - { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054800, 32) { - PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, - PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, - PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, - PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, - PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, - PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, - PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, - PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } - }, - { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054804, 32) { - PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, - PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, - PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, - PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, - PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, - PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, - PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, - PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } - }, - { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054808, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, - PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, - PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, - PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, - PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } - }, - { PINMUX_DATA_REG("PORTD095_064DR", 0xe6055808, 32) { - PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, - PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, - PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0 } - }, - { PINMUX_DATA_REG("PORTD127_096DR", 0xe605580c, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, PORT114_DATA, PORT113_DATA, PORT112_DATA, - PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, - PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, - PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, - PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } - }, - { PINMUX_DATA_REG("PORTR127_096DR", 0xe605680C, 32) { - PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA, - PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA, - PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA, - PORT115_DATA, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0 } - }, - { PINMUX_DATA_REG("PORTR159_128DR", 0xe6056810, 32) { - PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, - PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, - PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, - PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, - PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, - PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, - PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, - PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } - }, - { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056814, 32) { - PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA, - PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA, - PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA, - PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA, - PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA, - PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA, - PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA, - PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } - }, - { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056818, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, PORT209_DATA, PORT208_DATA, - PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, - PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, - PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, - PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } - }, - { PINMUX_DATA_REG("PORTU223_192DR", 0xe6057818, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - PORT211_DATA, PORT210_DATA, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0 } - }, - { }, -}; - -static struct pinmux_irq pinmux_irqs[] = { - PINMUX_IRQ(evt2irq(0x0200), PORT2_FN0, PORT13_FN0), /* IRQ0A */ - PINMUX_IRQ(evt2irq(0x0220), PORT20_FN0), /* IRQ1A */ - PINMUX_IRQ(evt2irq(0x0240), PORT11_FN0, PORT12_FN0), /* IRQ2A */ - PINMUX_IRQ(evt2irq(0x0260), PORT10_FN0, PORT14_FN0), /* IRQ3A */ - PINMUX_IRQ(evt2irq(0x0280), PORT15_FN0, PORT172_FN0), /* IRQ4A */ - PINMUX_IRQ(evt2irq(0x02A0), PORT0_FN0, PORT1_FN0), /* IRQ5A */ - PINMUX_IRQ(evt2irq(0x02C0), PORT121_FN0, PORT173_FN0), /* IRQ6A */ - PINMUX_IRQ(evt2irq(0x02E0), PORT120_FN0, PORT209_FN0), /* IRQ7A */ - PINMUX_IRQ(evt2irq(0x0300), PORT119_FN0), /* IRQ8A */ - PINMUX_IRQ(evt2irq(0x0320), PORT118_FN0, PORT210_FN0), /* IRQ9A */ - PINMUX_IRQ(evt2irq(0x0340), PORT19_FN0), /* IRQ10A */ - PINMUX_IRQ(evt2irq(0x0360), PORT104_FN0), /* IRQ11A */ - PINMUX_IRQ(evt2irq(0x0380), PORT42_FN0, PORT97_FN0), /* IRQ12A */ - PINMUX_IRQ(evt2irq(0x03A0), PORT64_FN0, PORT98_FN0), /* IRQ13A */ - PINMUX_IRQ(evt2irq(0x03C0), PORT63_FN0, PORT99_FN0), /* IRQ14A */ - PINMUX_IRQ(evt2irq(0x03E0), PORT62_FN0, PORT100_FN0), /* IRQ15A */ - PINMUX_IRQ(evt2irq(0x3200), PORT68_FN0, PORT211_FN0), /* IRQ16A */ - PINMUX_IRQ(evt2irq(0x3220), PORT69_FN0), /* IRQ17A */ - PINMUX_IRQ(evt2irq(0x3240), PORT70_FN0), /* IRQ18A */ - PINMUX_IRQ(evt2irq(0x3260), PORT71_FN0), /* IRQ19A */ - PINMUX_IRQ(evt2irq(0x3280), PORT67_FN0), /* IRQ20A */ - PINMUX_IRQ(evt2irq(0x32A0), PORT202_FN0), /* IRQ21A */ - PINMUX_IRQ(evt2irq(0x32C0), PORT95_FN0), /* IRQ22A */ - PINMUX_IRQ(evt2irq(0x32E0), PORT96_FN0), /* IRQ23A */ - PINMUX_IRQ(evt2irq(0x3300), PORT180_FN0), /* IRQ24A */ - PINMUX_IRQ(evt2irq(0x3320), PORT38_FN0), /* IRQ25A */ - PINMUX_IRQ(evt2irq(0x3340), PORT58_FN0, PORT81_FN0), /* IRQ26A */ - PINMUX_IRQ(evt2irq(0x3360), PORT57_FN0, PORT168_FN0), /* IRQ27A */ - PINMUX_IRQ(evt2irq(0x3380), PORT56_FN0, PORT169_FN0), /* IRQ28A */ - PINMUX_IRQ(evt2irq(0x33A0), PORT50_FN0, PORT170_FN0), /* IRQ29A */ - PINMUX_IRQ(evt2irq(0x33C0), PORT49_FN0, PORT171_FN0), /* IRQ30A */ - PINMUX_IRQ(evt2irq(0x33E0), PORT41_FN0, PORT167_FN0), /* IRQ31A */ -}; - -static struct pinmux_info r8a7740_pinmux_info = { - .name = "r8a7740_pfc", - .reserved_id = PINMUX_RESERVED, - .data = { PINMUX_DATA_BEGIN, - PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, - PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, - PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, - PINMUX_INPUT_PULLDOWN_END }, - .output = { PINMUX_OUTPUT_BEGIN, - PINMUX_OUTPUT_END }, - .mark = { PINMUX_MARK_BEGIN, - PINMUX_MARK_END }, - .function = { PINMUX_FUNCTION_BEGIN, - PINMUX_FUNCTION_END }, - - .first_gpio = GPIO_PORT0, - .last_gpio = GPIO_FN_TRACEAUD_FROM_MEMC, - - .gpios = pinmux_gpios, - .cfg_regs = pinmux_config_regs, - .data_regs = pinmux_data_regs, - - .gpio_data = pinmux_data, - .gpio_data_size = ARRAY_SIZE(pinmux_data), - - .gpio_irq = pinmux_irqs, - .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), -}; - -void r8a7740_pinmux_init(void) -{ - register_pinmux(&r8a7740_pinmux_info); -} diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c deleted file mode 100644 index 9513234..0000000 --- a/arch/arm/mach-shmobile/pfc-r8a7779.c +++ /dev/null @@ -1,2645 +0,0 @@ -/* - * r8a7779 processor support - PFC hardware block - * - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sh_pfc.h> -#include <linux/ioport.h> -#include <mach/r8a7779.h> - -#define CPU_32_PORT(fn, pfx, sfx) \ - PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \ - PORT_10(fn, pfx##2, sfx), PORT_1(fn, pfx##30, sfx), \ - PORT_1(fn, pfx##31, sfx) - -#define CPU_32_PORT6(fn, pfx, sfx) \ - PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx), \ - PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx), \ - PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx), \ - PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx), \ - PORT_1(fn, pfx##8, sfx) - -#define CPU_ALL_PORT(fn, pfx, sfx) \ - CPU_32_PORT(fn, pfx##_0_, sfx), \ - CPU_32_PORT(fn, pfx##_1_, sfx), \ - CPU_32_PORT(fn, pfx##_2_, sfx), \ - CPU_32_PORT(fn, pfx##_3_, sfx), \ - CPU_32_PORT(fn, pfx##_4_, sfx), \ - CPU_32_PORT(fn, pfx##_5_, sfx), \ - CPU_32_PORT6(fn, pfx##_6_, sfx) - -#define _GP_GPIO(pfx, sfx) PINMUX_GPIO(GPIO_GP##pfx, GP##pfx##_DATA) -#define _GP_DATA(pfx, sfx) PINMUX_DATA(GP##pfx##_DATA, GP##pfx##_FN, \ - GP##pfx##_IN, GP##pfx##_OUT) - -#define _GP_INOUTSEL(pfx, sfx) GP##pfx##_IN, GP##pfx##_OUT -#define _GP_INDT(pfx, sfx) GP##pfx##_DATA - -#define GP_ALL(str) CPU_ALL_PORT(_PORT_ALL, GP, str) -#define PINMUX_GPIO_GP_ALL() CPU_ALL_PORT(_GP_GPIO, , unused) -#define PINMUX_DATA_GP_ALL() CPU_ALL_PORT(_GP_DATA, , unused) - - -#define PORT_10_REV(fn, pfx, sfx) \ - PORT_1(fn, pfx##9, sfx), PORT_1(fn, pfx##8, sfx), \ - PORT_1(fn, pfx##7, sfx), PORT_1(fn, pfx##6, sfx), \ - PORT_1(fn, pfx##5, sfx), PORT_1(fn, pfx##4, sfx), \ - PORT_1(fn, pfx##3, sfx), PORT_1(fn, pfx##2, sfx), \ - PORT_1(fn, pfx##1, sfx), PORT_1(fn, pfx##0, sfx) - -#define CPU_32_PORT_REV(fn, pfx, sfx) \ - PORT_1(fn, pfx##31, sfx), PORT_1(fn, pfx##30, sfx), \ - PORT_10_REV(fn, pfx##2, sfx), PORT_10_REV(fn, pfx##1, sfx), \ - PORT_10_REV(fn, pfx, sfx) - -#define GP_INOUTSEL(bank) CPU_32_PORT_REV(_GP_INOUTSEL, _##bank##_, unused) -#define GP_INDT(bank) CPU_32_PORT_REV(_GP_INDT, _##bank##_, unused) - -#define PINMUX_IPSR_DATA(ipsr, fn) PINMUX_DATA(fn##_MARK, FN_##ipsr, FN_##fn) -#define PINMUX_IPSR_MODSEL_DATA(ipsr, fn, ms) PINMUX_DATA(fn##_MARK, FN_##ms, \ - FN_##ipsr, FN_##fn) - -enum { - PINMUX_RESERVED = 0, - - PINMUX_DATA_BEGIN, - GP_ALL(DATA), /* GP_0_0_DATA -> GP_6_8_DATA */ - PINMUX_DATA_END, - - PINMUX_INPUT_BEGIN, - GP_ALL(IN), /* GP_0_0_IN -> GP_6_8_IN */ - PINMUX_INPUT_END, - - PINMUX_OUTPUT_BEGIN, - GP_ALL(OUT), /* GP_0_0_OUT -> GP_6_8_OUT */ - PINMUX_OUTPUT_END, - - PINMUX_FUNCTION_BEGIN, - GP_ALL(FN), /* GP_0_0_FN -> GP_6_8_FN */ - - /* GPSR0 */ - FN_AVS1, FN_AVS2, FN_IP0_7_6, FN_A17, - FN_A18, FN_A19, FN_IP0_9_8, FN_IP0_11_10, - FN_IP0_13_12, FN_IP0_15_14, FN_IP0_18_16, FN_IP0_22_19, - FN_IP0_24_23, FN_IP0_25, FN_IP0_27_26, FN_IP1_1_0, - FN_IP1_3_2, FN_IP1_6_4, FN_IP1_10_7, FN_IP1_14_11, - FN_IP1_18_15, FN_IP0_5_3, FN_IP0_30_28, FN_IP2_18_16, - FN_IP2_21_19, FN_IP2_30_28, FN_IP3_2_0, FN_IP3_11_9, - FN_IP3_14_12, FN_IP3_22_21, FN_IP3_26_24, FN_IP3_31_29, - - /* GPSR1 */ - FN_IP4_1_0, FN_IP4_4_2, FN_IP4_7_5, FN_IP4_10_8, - FN_IP4_11, FN_IP4_12, FN_IP4_13, FN_IP4_14, - FN_IP4_15, FN_IP4_16, FN_IP4_19_17, FN_IP4_22_20, - FN_IP4_23, FN_IP4_24, FN_IP4_25, FN_IP4_26, - FN_IP4_27, FN_IP4_28, FN_IP4_31_29, FN_IP5_2_0, - FN_IP5_3, FN_IP5_4, FN_IP5_5, FN_IP5_6, - FN_IP5_7, FN_IP5_8, FN_IP5_10_9, FN_IP5_12_11, - FN_IP5_14_13, FN_IP5_16_15, FN_IP5_20_17, FN_IP5_23_21, - - /* GPSR2 */ - FN_IP5_27_24, FN_IP8_20, FN_IP8_22_21, FN_IP8_24_23, - FN_IP8_27_25, FN_IP8_30_28, FN_IP9_1_0, FN_IP9_3_2, - FN_IP9_4, FN_IP9_5, FN_IP9_6, FN_IP9_7, - FN_IP9_9_8, FN_IP9_11_10, FN_IP9_13_12, FN_IP9_15_14, - FN_IP9_18_16, FN_IP9_21_19, FN_IP9_23_22, FN_IP9_25_24, - FN_IP9_27_26, FN_IP9_29_28, FN_IP10_2_0, FN_IP10_5_3, - FN_IP10_8_6, FN_IP10_11_9, FN_IP10_14_12, FN_IP10_17_15, - FN_IP10_20_18, FN_IP10_23_21, FN_IP10_25_24, FN_IP10_28_26, - - /* GPSR3 */ - FN_IP10_31_29, FN_IP11_2_0, FN_IP11_5_3, FN_IP11_8_6, - FN_IP11_11_9, FN_IP11_14_12, FN_IP11_17_15, FN_IP11_20_18, - FN_IP11_23_21, FN_IP11_26_24, FN_IP11_29_27, FN_IP12_2_0, - FN_IP12_5_3, FN_IP12_8_6, FN_IP12_11_9, FN_IP12_14_12, - FN_IP12_17_15, FN_IP7_16_15, FN_IP7_18_17, FN_IP7_28_27, - FN_IP7_30_29, FN_IP7_20_19, FN_IP7_22_21, FN_IP7_24_23, - FN_IP7_26_25, FN_IP1_20_19, FN_IP1_22_21, FN_IP1_24_23, - FN_IP5_28, FN_IP5_30_29, FN_IP6_1_0, FN_IP6_3_2, - - /* GPSR4 */ - FN_IP6_5_4, FN_IP6_7_6, FN_IP6_8, FN_IP6_11_9, - FN_IP6_14_12, FN_IP6_17_15, FN_IP6_19_18, FN_IP6_22_20, - FN_IP6_24_23, FN_IP6_26_25, FN_IP6_30_29, FN_IP7_1_0, - FN_IP7_3_2, FN_IP7_6_4, FN_IP7_9_7, FN_IP7_12_10, - FN_IP7_14_13, FN_IP2_7_4, FN_IP2_11_8, FN_IP2_15_12, - FN_IP1_28_25, FN_IP2_3_0, FN_IP8_3_0, FN_IP8_7_4, - FN_IP8_11_8, FN_IP8_15_12, FN_USB_PENC0, FN_USB_PENC1, - FN_IP0_2_0, FN_IP8_17_16, FN_IP8_18, FN_IP8_19, - - /* GPSR5 */ - FN_A1, FN_A2, FN_A3, FN_A4, - FN_A5, FN_A6, FN_A7, FN_A8, - FN_A9, FN_A10, FN_A11, FN_A12, - FN_A13, FN_A14, FN_A15, FN_A16, - FN_RD, FN_WE0, FN_WE1, FN_EX_WAIT0, - FN_IP3_23, FN_IP3_27, FN_IP3_28, FN_IP2_22, - FN_IP2_23, FN_IP2_24, FN_IP2_25, FN_IP2_26, - FN_IP2_27, FN_IP3_3, FN_IP3_4, FN_IP3_5, - - /* GPSR6 */ - FN_IP3_6, FN_IP3_7, FN_IP3_8, FN_IP3_15, - FN_IP3_16, FN_IP3_17, FN_IP3_18, FN_IP3_19, - FN_IP3_20, - - /* IPSR0 */ - FN_RD_WR, FN_FWE, FN_ATAG0, FN_VI1_R7, - FN_HRTS1, FN_RX4_C, - FN_CS1_A26, FN_HSPI_TX2, FN_SDSELF_B, - FN_CS0, FN_HSPI_CS2_B, - FN_CLKOUT, FN_TX3C_IRDA_TX_C, FN_PWM0_B, - FN_A25, FN_SD1_WP, FN_MMC0_D5, FN_FD5, - FN_HSPI_RX2, FN_VI1_R3, FN_TX5_B, FN_SSI_SDATA7_B, - FN_CTS0_B, - FN_A24, FN_SD1_CD, FN_MMC0_D4, FN_FD4, - FN_HSPI_CS2, FN_VI1_R2, FN_SSI_WS78_B, - FN_A23, FN_FCLE, FN_HSPI_CLK2, FN_VI1_R1, - FN_A22, FN_RX5_D, FN_HSPI_RX2_B, FN_VI1_R0, - FN_A21, FN_SCK5_D, FN_HSPI_CLK2_B, - FN_A20, FN_TX5_D, FN_HSPI_TX2_B, - FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3, - FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2, - FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C, - FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, - FN_SCIF_CLK, FN_TCLK0_C, - - /* IPSR1 */ - FN_EX_CS0, FN_RX3_C_IRDA_RX_C, FN_MMC0_D6, - FN_FD6, FN_EX_CS1, FN_MMC0_D7, FN_FD7, - FN_EX_CS2, FN_SD1_CLK, FN_MMC0_CLK, FN_FALE, - FN_ATACS00, FN_EX_CS3, FN_SD1_CMD, FN_MMC0_CMD, - FN_FRE, FN_ATACS10, FN_VI1_R4, FN_RX5_B, - FN_HSCK1, FN_SSI_SDATA8_B, FN_RTS0_B_TANS_B, FN_SSI_SDATA9, - FN_EX_CS4, FN_SD1_DAT0, FN_MMC0_D0, FN_FD0, - FN_ATARD0, FN_VI1_R5, FN_SCK5_B, FN_HTX1, - FN_TX2_E, FN_TX0_B, FN_SSI_SCK9, FN_EX_CS5, - FN_SD1_DAT1, FN_MMC0_D1, FN_FD1, FN_ATAWR0, - FN_VI1_R6, FN_HRX1, FN_RX2_E, FN_RX0_B, - FN_SSI_WS9, FN_MLB_CLK, FN_PWM2, FN_SCK4, - FN_MLB_SIG, FN_PWM3, FN_TX4, FN_MLB_DAT, - FN_PWM4, FN_RX4, FN_HTX0, FN_TX1, - FN_SDATA, FN_CTS0_C, FN_SUB_TCK, FN_CC5_STATE2, - FN_CC5_STATE10, FN_CC5_STATE18, FN_CC5_STATE26, FN_CC5_STATE34, - - /* IPSR2 */ - FN_HRX0, FN_RX1, FN_SCKZ, FN_RTS0_C_TANS_C, - FN_SUB_TDI, FN_CC5_STATE3, FN_CC5_STATE11, FN_CC5_STATE19, - FN_CC5_STATE27, FN_CC5_STATE35, FN_HSCK0, FN_SCK1, - FN_MTS, FN_PWM5, FN_SCK0_C, FN_SSI_SDATA9_B, - FN_SUB_TDO, FN_CC5_STATE0, FN_CC5_STATE8, FN_CC5_STATE16, - FN_CC5_STATE24, FN_CC5_STATE32, FN_HCTS0, FN_CTS1, - FN_STM, FN_PWM0_D, FN_RX0_C, FN_SCIF_CLK_C, - FN_SUB_TRST, FN_TCLK1_B, FN_CC5_OSCOUT, FN_HRTS0, - FN_RTS1_TANS, FN_MDATA, FN_TX0_C, FN_SUB_TMS, - FN_CC5_STATE1, FN_CC5_STATE9, FN_CC5_STATE17, FN_CC5_STATE25, - FN_CC5_STATE33, FN_DU0_DR0, FN_LCDOUT0, FN_DREQ0, - FN_GPS_CLK_B, FN_AUDATA0, FN_TX5_C, FN_DU0_DR1, - FN_LCDOUT1, FN_DACK0, FN_DRACK0, FN_GPS_SIGN_B, - FN_AUDATA1, FN_RX5_C, FN_DU0_DR2, FN_LCDOUT2, - FN_DU0_DR3, FN_LCDOUT3, FN_DU0_DR4, FN_LCDOUT4, - FN_DU0_DR5, FN_LCDOUT5, FN_DU0_DR6, FN_LCDOUT6, - FN_DU0_DR7, FN_LCDOUT7, FN_DU0_DG0, FN_LCDOUT8, - FN_DREQ1, FN_SCL2, FN_AUDATA2, - - /* IPSR3 */ - FN_DU0_DG1, FN_LCDOUT9, FN_DACK1, FN_SDA2, - FN_AUDATA3, FN_DU0_DG2, FN_LCDOUT10, FN_DU0_DG3, - FN_LCDOUT11, FN_DU0_DG4, FN_LCDOUT12, FN_DU0_DG5, - FN_LCDOUT13, FN_DU0_DG6, FN_LCDOUT14, FN_DU0_DG7, - FN_LCDOUT15, FN_DU0_DB0, FN_LCDOUT16, FN_EX_WAIT1, - FN_SCL1, FN_TCLK1, FN_AUDATA4, FN_DU0_DB1, - FN_LCDOUT17, FN_EX_WAIT2, FN_SDA1, FN_GPS_MAG_B, - FN_AUDATA5, FN_SCK5_C, FN_DU0_DB2, FN_LCDOUT18, - FN_DU0_DB3, FN_LCDOUT19, FN_DU0_DB4, FN_LCDOUT20, - FN_DU0_DB5, FN_LCDOUT21, FN_DU0_DB6, FN_LCDOUT22, - FN_DU0_DB7, FN_LCDOUT23, FN_DU0_DOTCLKIN, FN_QSTVA_QVS, - FN_TX3_D_IRDA_TX_D, FN_SCL3_B, FN_DU0_DOTCLKOUT0, FN_QCLK, - FN_DU0_DOTCLKOUT1, FN_QSTVB_QVE, FN_RX3_D_IRDA_RX_D, FN_SDA3_B, - FN_SDA2_C, FN_DACK0_B, FN_DRACK0_B, FN_DU0_EXHSYNC_DU0_HSYNC, - FN_QSTH_QHS, FN_DU0_EXVSYNC_DU0_VSYNC, FN_QSTB_QHE, - FN_DU0_EXODDF_DU0_ODDF_DISP_CDE, FN_QCPV_QDE, FN_CAN1_TX, - FN_TX2_C, FN_SCL2_C, FN_REMOCON, - - /* IPSR4 */ - FN_DU0_DISP, FN_QPOLA, FN_CAN_CLK_C, FN_SCK2_C, - FN_DU0_CDE, FN_QPOLB, FN_CAN1_RX, FN_RX2_C, - FN_DREQ0_B, FN_SSI_SCK78_B, FN_SCK0_B, FN_DU1_DR0, - FN_VI2_DATA0_VI2_B0, FN_PWM6, FN_SD3_CLK, FN_TX3_E_IRDA_TX_E, - FN_AUDCK, FN_PWMFSW0_B, FN_DU1_DR1, FN_VI2_DATA1_VI2_B1, - FN_PWM0, FN_SD3_CMD, FN_RX3_E_IRDA_RX_E, FN_AUDSYNC, - FN_CTS0_D, FN_DU1_DR2, FN_VI2_G0, FN_DU1_DR3, - FN_VI2_G1, FN_DU1_DR4, FN_VI2_G2, FN_DU1_DR5, - FN_VI2_G3, FN_DU1_DR6, FN_VI2_G4, FN_DU1_DR7, - FN_VI2_G5, FN_DU1_DG0, FN_VI2_DATA2_VI2_B2, FN_SCL1_B, - FN_SD3_DAT2, FN_SCK3_E, FN_AUDATA6, FN_TX0_D, - FN_DU1_DG1, FN_VI2_DATA3_VI2_B3, FN_SDA1_B, FN_SD3_DAT3, - FN_SCK5, FN_AUDATA7, FN_RX0_D, FN_DU1_DG2, - FN_VI2_G6, FN_DU1_DG3, FN_VI2_G7, FN_DU1_DG4, - FN_VI2_R0, FN_DU1_DG5, FN_VI2_R1, FN_DU1_DG6, - FN_VI2_R2, FN_DU1_DG7, FN_VI2_R3, FN_DU1_DB0, - FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, FN_TX5, - FN_SCK0_D, - - /* IPSR5 */ - FN_DU1_DB1, FN_VI2_DATA5_VI2_B5, FN_SDA2_B, FN_SD3_DAT1, - FN_RX5, FN_RTS0_D_TANS_D, FN_DU1_DB2, FN_VI2_R4, - FN_DU1_DB3, FN_VI2_R5, FN_DU1_DB4, FN_VI2_R6, - FN_DU1_DB5, FN_VI2_R7, FN_DU1_DB6, FN_SCL2_D, - FN_DU1_DB7, FN_SDA2_D, FN_DU1_DOTCLKIN, FN_VI2_CLKENB, - FN_HSPI_CS1, FN_SCL1_D, FN_DU1_DOTCLKOUT, FN_VI2_FIELD, - FN_SDA1_D, FN_DU1_EXHSYNC_DU1_HSYNC, FN_VI2_HSYNC, - FN_VI3_HSYNC, FN_DU1_EXVSYNC_DU1_VSYNC, FN_VI2_VSYNC, FN_VI3_VSYNC, - FN_DU1_EXODDF_DU1_ODDF_DISP_CDE, FN_VI2_CLK, FN_TX3_B_IRDA_TX_B, - FN_SD3_CD, FN_HSPI_TX1, FN_VI1_CLKENB, FN_VI3_CLKENB, - FN_AUDIO_CLKC, FN_TX2_D, FN_SPEEDIN, FN_GPS_SIGN_D, - FN_DU1_DISP, FN_VI2_DATA6_VI2_B6, FN_TCLK0, FN_QSTVA_B_QVS_B, - FN_HSPI_CLK1, FN_SCK2_D, FN_AUDIO_CLKOUT_B, FN_GPS_MAG_D, - FN_DU1_CDE, FN_VI2_DATA7_VI2_B7, FN_RX3_B_IRDA_RX_B, - FN_SD3_WP, FN_HSPI_RX1, FN_VI1_FIELD, FN_VI3_FIELD, - FN_AUDIO_CLKOUT, FN_RX2_D, FN_GPS_CLK_C, FN_GPS_CLK_D, - FN_AUDIO_CLKA, FN_CAN_TXCLK, FN_AUDIO_CLKB, FN_USB_OVC2, - FN_CAN_DEBUGOUT0, FN_MOUT0, - - /* IPSR6 */ - FN_SSI_SCK0129, FN_CAN_DEBUGOUT1, FN_MOUT1, FN_SSI_WS0129, - FN_CAN_DEBUGOUT2, FN_MOUT2, FN_SSI_SDATA0, FN_CAN_DEBUGOUT3, - FN_MOUT5, FN_SSI_SDATA1, FN_CAN_DEBUGOUT4, FN_MOUT6, - FN_SSI_SDATA2, FN_CAN_DEBUGOUT5, FN_SSI_SCK34, FN_CAN_DEBUGOUT6, - FN_CAN0_TX_B, FN_IERX, FN_SSI_SCK9_C, FN_SSI_WS34, - FN_CAN_DEBUGOUT7, FN_CAN0_RX_B, FN_IETX, FN_SSI_WS9_C, - FN_SSI_SDATA3, FN_PWM0_C, FN_CAN_DEBUGOUT8, FN_CAN_CLK_B, - FN_IECLK, FN_SCIF_CLK_B, FN_TCLK0_B, FN_SSI_SDATA4, - FN_CAN_DEBUGOUT9, FN_SSI_SDATA9_C, FN_SSI_SCK5, FN_ADICLK, - FN_CAN_DEBUGOUT10, FN_SCK3, FN_TCLK0_D, FN_SSI_WS5, - FN_ADICS_SAMP, FN_CAN_DEBUGOUT11, FN_TX3_IRDA_TX, FN_SSI_SDATA5, - FN_ADIDATA, FN_CAN_DEBUGOUT12, FN_RX3_IRDA_RX, FN_SSI_SCK6, - FN_ADICHS0, FN_CAN0_TX, FN_IERX_B, - - /* IPSR7 */ - FN_SSI_WS6, FN_ADICHS1, FN_CAN0_RX, FN_IETX_B, - FN_SSI_SDATA6, FN_ADICHS2, FN_CAN_CLK, FN_IECLK_B, - FN_SSI_SCK78, FN_CAN_DEBUGOUT13, FN_IRQ0_B, FN_SSI_SCK9_B, - FN_HSPI_CLK1_C, FN_SSI_WS78, FN_CAN_DEBUGOUT14, FN_IRQ1_B, - FN_SSI_WS9_B, FN_HSPI_CS1_C, FN_SSI_SDATA7, FN_CAN_DEBUGOUT15, - FN_IRQ2_B, FN_TCLK1_C, FN_HSPI_TX1_C, FN_SSI_SDATA8, - FN_VSP, FN_IRQ3_B, FN_HSPI_RX1_C, FN_SD0_CLK, - FN_ATACS01, FN_SCK1_B, FN_SD0_CMD, FN_ATACS11, - FN_TX1_B, FN_CC5_TDO, FN_SD0_DAT0, FN_ATADIR1, - FN_RX1_B, FN_CC5_TRST, FN_SD0_DAT1, FN_ATAG1, - FN_SCK2_B, FN_CC5_TMS, FN_SD0_DAT2, FN_ATARD1, - FN_TX2_B, FN_CC5_TCK, FN_SD0_DAT3, FN_ATAWR1, - FN_RX2_B, FN_CC5_TDI, FN_SD0_CD, FN_DREQ2, - FN_RTS1_B_TANS_B, FN_SD0_WP, FN_DACK2, FN_CTS1_B, - - /* IPSR8 */ - FN_HSPI_CLK0, FN_CTS0, FN_USB_OVC0, FN_AD_CLK, - FN_CC5_STATE4, FN_CC5_STATE12, FN_CC5_STATE20, FN_CC5_STATE28, - FN_CC5_STATE36, FN_HSPI_CS0, FN_RTS0_TANS, FN_USB_OVC1, - FN_AD_DI, FN_CC5_STATE5, FN_CC5_STATE13, FN_CC5_STATE21, - FN_CC5_STATE29, FN_CC5_STATE37, FN_HSPI_TX0, FN_TX0, - FN_CAN_DEBUG_HW_TRIGGER, FN_AD_DO, FN_CC5_STATE6, FN_CC5_STATE14, - FN_CC5_STATE22, FN_CC5_STATE30, FN_CC5_STATE38, FN_HSPI_RX0, - FN_RX0, FN_CAN_STEP0, FN_AD_NCS, FN_CC5_STATE7, - FN_CC5_STATE15, FN_CC5_STATE23, FN_CC5_STATE31, FN_CC5_STATE39, - FN_FMCLK, FN_RDS_CLK, FN_PCMOE, FN_BPFCLK, - FN_PCMWE, FN_FMIN, FN_RDS_DATA, FN_VI0_CLK, - FN_MMC1_CLK, FN_VI0_CLKENB, FN_TX1_C, FN_HTX1_B, - FN_MT1_SYNC, FN_VI0_FIELD, FN_RX1_C, FN_HRX1_B, - FN_VI0_HSYNC, FN_VI0_DATA0_B_VI0_B0_B, FN_CTS1_C, FN_TX4_D, - FN_MMC1_CMD, FN_HSCK1_B, FN_VI0_VSYNC, FN_VI0_DATA1_B_VI0_B1_B, - FN_RTS1_C_TANS_C, FN_RX4_D, FN_PWMFSW0_C, - - /* IPSR9 */ - FN_VI0_DATA0_VI0_B0, FN_HRTS1_B, FN_MT1_VCXO, FN_VI0_DATA1_VI0_B1, - FN_HCTS1_B, FN_MT1_PWM, FN_VI0_DATA2_VI0_B2, FN_MMC1_D0, - FN_VI0_DATA3_VI0_B3, FN_MMC1_D1, FN_VI0_DATA4_VI0_B4, FN_MMC1_D2, - FN_VI0_DATA5_VI0_B5, FN_MMC1_D3, FN_VI0_DATA6_VI0_B6, FN_MMC1_D4, - FN_ARM_TRACEDATA_0, FN_VI0_DATA7_VI0_B7, FN_MMC1_D5, - FN_ARM_TRACEDATA_1, FN_VI0_G0, FN_SSI_SCK78_C, FN_IRQ0, - FN_ARM_TRACEDATA_2, FN_VI0_G1, FN_SSI_WS78_C, FN_IRQ1, - FN_ARM_TRACEDATA_3, FN_VI0_G2, FN_ETH_TXD1, FN_MMC1_D6, - FN_ARM_TRACEDATA_4, FN_TS_SPSYNC0, FN_VI0_G3, FN_ETH_CRS_DV, - FN_MMC1_D7, FN_ARM_TRACEDATA_5, FN_TS_SDAT0, FN_VI0_G4, - FN_ETH_TX_EN, FN_SD2_DAT0_B, FN_ARM_TRACEDATA_6, FN_VI0_G5, - FN_ETH_RX_ER, FN_SD2_DAT1_B, FN_ARM_TRACEDATA_7, FN_VI0_G6, - FN_ETH_RXD0, FN_SD2_DAT2_B, FN_ARM_TRACEDATA_8, FN_VI0_G7, - FN_ETH_RXD1, FN_SD2_DAT3_B, FN_ARM_TRACEDATA_9, - - /* IPSR10 */ - FN_VI0_R0, FN_SSI_SDATA7_C, FN_SCK1_C, FN_DREQ1_B, - FN_ARM_TRACEDATA_10, FN_DREQ0_C, FN_VI0_R1, FN_SSI_SDATA8_C, - FN_DACK1_B, FN_ARM_TRACEDATA_11, FN_DACK0_C, FN_DRACK0_C, - FN_VI0_R2, FN_ETH_LINK, FN_SD2_CLK_B, FN_IRQ2, - FN_ARM_TRACEDATA_12, FN_VI0_R3, FN_ETH_MAGIC, FN_SD2_CMD_B, - FN_IRQ3, FN_ARM_TRACEDATA_13, FN_VI0_R4, FN_ETH_REFCLK, - FN_SD2_CD_B, FN_HSPI_CLK1_B, FN_ARM_TRACEDATA_14, FN_MT1_CLK, - FN_TS_SCK0, FN_VI0_R5, FN_ETH_TXD0, FN_SD2_WP_B, FN_HSPI_CS1_B, - FN_ARM_TRACEDATA_15, FN_MT1_D, FN_TS_SDEN0, FN_VI0_R6, - FN_ETH_MDC, FN_DREQ2_C, FN_HSPI_TX1_B, FN_TRACECLK, - FN_MT1_BEN, FN_PWMFSW0_D, FN_VI0_R7, FN_ETH_MDIO, - FN_DACK2_C, FN_HSPI_RX1_B, FN_SCIF_CLK_D, FN_TRACECTL, - FN_MT1_PEN, FN_VI1_CLK, FN_SIM_D, FN_SDA3, - FN_VI1_HSYNC, FN_VI3_CLK, FN_SSI_SCK4, FN_GPS_SIGN_C, - FN_PWMFSW0_E, FN_VI1_VSYNC, FN_AUDIO_CLKOUT_C, FN_SSI_WS4, - FN_SIM_CLK, FN_GPS_MAG_C, FN_SPV_TRST, FN_SCL3, - - /* IPSR11 */ - FN_VI1_DATA0_VI1_B0, FN_SD2_DAT0, FN_SIM_RST, FN_SPV_TCK, - FN_ADICLK_B, FN_VI1_DATA1_VI1_B1, FN_SD2_DAT1, FN_MT0_CLK, - FN_SPV_TMS, FN_ADICS_B_SAMP_B, FN_VI1_DATA2_VI1_B2, FN_SD2_DAT2, - FN_MT0_D, FN_SPVTDI, FN_ADIDATA_B, FN_VI1_DATA3_VI1_B3, - FN_SD2_DAT3, FN_MT0_BEN, FN_SPV_TDO, FN_ADICHS0_B, - FN_VI1_DATA4_VI1_B4, FN_SD2_CLK, FN_MT0_PEN, FN_SPA_TRST, - FN_HSPI_CLK1_D, FN_ADICHS1_B, FN_VI1_DATA5_VI1_B5, FN_SD2_CMD, - FN_MT0_SYNC, FN_SPA_TCK, FN_HSPI_CS1_D, FN_ADICHS2_B, - FN_VI1_DATA6_VI1_B6, FN_SD2_CD, FN_MT0_VCXO, FN_SPA_TMS, - FN_HSPI_TX1_D, FN_VI1_DATA7_VI1_B7, FN_SD2_WP, FN_MT0_PWM, - FN_SPA_TDI, FN_HSPI_RX1_D, FN_VI1_G0, FN_VI3_DATA0, - FN_DU1_DOTCLKOUT1, FN_TS_SCK1, FN_DREQ2_B, FN_TX2, - FN_SPA_TDO, FN_HCTS0_B, FN_VI1_G1, FN_VI3_DATA1, - FN_SSI_SCK1, FN_TS_SDEN1, FN_DACK2_B, FN_RX2, FN_HRTS0_B, - - /* IPSR12 */ - FN_VI1_G2, FN_VI3_DATA2, FN_SSI_WS1, FN_TS_SPSYNC1, - FN_SCK2, FN_HSCK0_B, FN_VI1_G3, FN_VI3_DATA3, - FN_SSI_SCK2, FN_TS_SDAT1, FN_SCL1_C, FN_HTX0_B, - FN_VI1_G4, FN_VI3_DATA4, FN_SSI_WS2, FN_SDA1_C, - FN_SIM_RST_B, FN_HRX0_B, FN_VI1_G5, FN_VI3_DATA5, - FN_GPS_CLK, FN_FSE, FN_TX4_B, FN_SIM_D_B, - FN_VI1_G6, FN_VI3_DATA6, FN_GPS_SIGN, FN_FRB, - FN_RX4_B, FN_SIM_CLK_B, FN_VI1_G7, FN_VI3_DATA7, - FN_GPS_MAG, FN_FCE, FN_SCK4_B, - - FN_SEL_SCIF5_0, FN_SEL_SCIF5_1, FN_SEL_SCIF5_2, FN_SEL_SCIF5_3, - FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2, FN_SEL_SCIF4_3, - FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, - FN_SEL_SCIF3_3, FN_SEL_SCIF3_4, - FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2, - FN_SEL_SCIF2_3, FN_SEL_SCIF2_4, - FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, - FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2, FN_SEL_SCIF0_3, - FN_SEL_SSI9_0, FN_SEL_SSI9_1, FN_SEL_SSI9_2, - FN_SEL_SSI8_0, FN_SEL_SSI8_1, FN_SEL_SSI8_2, - FN_SEL_SSI7_0, FN_SEL_SSI7_1, FN_SEL_SSI7_2, - FN_SEL_VI0_0, FN_SEL_VI0_1, - FN_SEL_SD2_0, FN_SEL_SD2_1, - FN_SEL_INT3_0, FN_SEL_INT3_1, - FN_SEL_INT2_0, FN_SEL_INT2_1, - FN_SEL_INT1_0, FN_SEL_INT1_1, - FN_SEL_INT0_0, FN_SEL_INT0_1, - FN_SEL_IE_0, FN_SEL_IE_1, - FN_SEL_EXBUS2_0, FN_SEL_EXBUS2_1, FN_SEL_EXBUS2_2, - FN_SEL_EXBUS1_0, FN_SEL_EXBUS1_1, - FN_SEL_EXBUS0_0, FN_SEL_EXBUS0_1, FN_SEL_EXBUS0_2, - - FN_SEL_TMU1_0, FN_SEL_TMU1_1, FN_SEL_TMU1_2, - FN_SEL_TMU0_0, FN_SEL_TMU0_1, FN_SEL_TMU0_2, FN_SEL_TMU0_3, - FN_SEL_SCIF_0, FN_SEL_SCIF_1, FN_SEL_SCIF_2, FN_SEL_SCIF_3, - FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, FN_SEL_CANCLK_2, - FN_SEL_CAN0_0, FN_SEL_CAN0_1, - FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, - FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, - FN_SEL_PWMFSW_0, FN_SEL_PWMFSW_1, FN_SEL_PWMFSW_2, - FN_SEL_PWMFSW_3, FN_SEL_PWMFSW_4, - FN_SEL_ADI_0, FN_SEL_ADI_1, - FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, FN_SEL_GPS_3, - FN_SEL_SIM_0, FN_SEL_SIM_1, - FN_SEL_HSPI2_0, FN_SEL_HSPI2_1, - FN_SEL_HSPI1_0, FN_SEL_HSPI1_1, FN_SEL_HSPI1_2, FN_SEL_HSPI1_3, - FN_SEL_I2C3_0, FN_SEL_I2C3_1, - FN_SEL_I2C2_0, FN_SEL_I2C2_1, FN_SEL_I2C2_2, FN_SEL_I2C2_3, - FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2, FN_SEL_I2C1_3, - PINMUX_FUNCTION_END, - - PINMUX_MARK_BEGIN, - AVS1_MARK, AVS2_MARK, A17_MARK, A18_MARK, - A19_MARK, - - RD_WR_MARK, FWE_MARK, ATAG0_MARK, VI1_R7_MARK, - HRTS1_MARK, RX4_C_MARK, - CS1_A26_MARK, HSPI_TX2_MARK, SDSELF_B_MARK, - CS0_MARK, HSPI_CS2_B_MARK, - CLKOUT_MARK, TX3C_IRDA_TX_C_MARK, PWM0_B_MARK, - A25_MARK, SD1_WP_MARK, MMC0_D5_MARK, FD5_MARK, - HSPI_RX2_MARK, VI1_R3_MARK, TX5_B_MARK, SSI_SDATA7_B_MARK, CTS0_B_MARK, - A24_MARK, SD1_CD_MARK, MMC0_D4_MARK, FD4_MARK, - HSPI_CS2_MARK, VI1_R2_MARK, SSI_WS78_B_MARK, - A23_MARK, FCLE_MARK, HSPI_CLK2_MARK, VI1_R1_MARK, - A22_MARK, RX5_D_MARK, HSPI_RX2_B_MARK, VI1_R0_MARK, - A21_MARK, SCK5_D_MARK, HSPI_CLK2_B_MARK, - A20_MARK, TX5_D_MARK, HSPI_TX2_B_MARK, - A0_MARK, SD1_DAT3_MARK, MMC0_D3_MARK, FD3_MARK, - BS_MARK, SD1_DAT2_MARK, MMC0_D2_MARK, FD2_MARK, - ATADIR0_MARK, SDSELF_MARK, HCTS1_MARK, TX4_C_MARK, - USB_PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK, - SCIF_CLK_MARK, TCLK0_C_MARK, - - EX_CS0_MARK, RX3_C_IRDA_RX_C_MARK, MMC0_D6_MARK, - FD6_MARK, EX_CS1_MARK, MMC0_D7_MARK, FD7_MARK, - EX_CS2_MARK, SD1_CLK_MARK, MMC0_CLK_MARK, FALE_MARK, - ATACS00_MARK, EX_CS3_MARK, SD1_CMD_MARK, MMC0_CMD_MARK, - FRE_MARK, ATACS10_MARK, VI1_R4_MARK, RX5_B_MARK, - HSCK1_MARK, SSI_SDATA8_B_MARK, RTS0_B_TANS_B_MARK, SSI_SDATA9_MARK, - EX_CS4_MARK, SD1_DAT0_MARK, MMC0_D0_MARK, FD0_MARK, - ATARD0_MARK, VI1_R5_MARK, SCK5_B_MARK, HTX1_MARK, - TX2_E_MARK, TX0_B_MARK, SSI_SCK9_MARK, EX_CS5_MARK, - SD1_DAT1_MARK, MMC0_D1_MARK, FD1_MARK, ATAWR0_MARK, - VI1_R6_MARK, HRX1_MARK, RX2_E_MARK, RX0_B_MARK, - SSI_WS9_MARK, MLB_CLK_MARK, PWM2_MARK, SCK4_MARK, - MLB_SIG_MARK, PWM3_MARK, TX4_MARK, MLB_DAT_MARK, - PWM4_MARK, RX4_MARK, HTX0_MARK, TX1_MARK, - SDATA_MARK, CTS0_C_MARK, SUB_TCK_MARK, CC5_STATE2_MARK, - CC5_STATE10_MARK, CC5_STATE18_MARK, CC5_STATE26_MARK, CC5_STATE34_MARK, - - HRX0_MARK, RX1_MARK, SCKZ_MARK, RTS0_C_TANS_C_MARK, - SUB_TDI_MARK, CC5_STATE3_MARK, CC5_STATE11_MARK, CC5_STATE19_MARK, - CC5_STATE27_MARK, CC5_STATE35_MARK, HSCK0_MARK, SCK1_MARK, - MTS_MARK, PWM5_MARK, SCK0_C_MARK, SSI_SDATA9_B_MARK, - SUB_TDO_MARK, CC5_STATE0_MARK, CC5_STATE8_MARK, CC5_STATE16_MARK, - CC5_STATE24_MARK, CC5_STATE32_MARK, HCTS0_MARK, CTS1_MARK, - STM_MARK, PWM0_D_MARK, RX0_C_MARK, SCIF_CLK_C_MARK, - SUB_TRST_MARK, TCLK1_B_MARK, CC5_OSCOUT_MARK, HRTS0_MARK, - RTS1_TANS_MARK, MDATA_MARK, TX0_C_MARK, SUB_TMS_MARK, - CC5_STATE1_MARK, CC5_STATE9_MARK, CC5_STATE17_MARK, CC5_STATE25_MARK, - CC5_STATE33_MARK, DU0_DR0_MARK, LCDOUT0_MARK, DREQ0_MARK, - GPS_CLK_B_MARK, AUDATA0_MARK, TX5_C_MARK, DU0_DR1_MARK, - LCDOUT1_MARK, DACK0_MARK, DRACK0_MARK, GPS_SIGN_B_MARK, - AUDATA1_MARK, RX5_C_MARK, DU0_DR2_MARK, LCDOUT2_MARK, - DU0_DR3_MARK, LCDOUT3_MARK, DU0_DR4_MARK, LCDOUT4_MARK, - DU0_DR5_MARK, LCDOUT5_MARK, DU0_DR6_MARK, LCDOUT6_MARK, - DU0_DR7_MARK, LCDOUT7_MARK, DU0_DG0_MARK, LCDOUT8_MARK, - DREQ1_MARK, SCL2_MARK, AUDATA2_MARK, - - DU0_DG1_MARK, LCDOUT9_MARK, DACK1_MARK, SDA2_MARK, - AUDATA3_MARK, DU0_DG2_MARK, LCDOUT10_MARK, DU0_DG3_MARK, - LCDOUT11_MARK, DU0_DG4_MARK, LCDOUT12_MARK, DU0_DG5_MARK, - LCDOUT13_MARK, DU0_DG6_MARK, LCDOUT14_MARK, DU0_DG7_MARK, - LCDOUT15_MARK, DU0_DB0_MARK, LCDOUT16_MARK, EX_WAIT1_MARK, - SCL1_MARK, TCLK1_MARK, AUDATA4_MARK, DU0_DB1_MARK, - LCDOUT17_MARK, EX_WAIT2_MARK, SDA1_MARK, GPS_MAG_B_MARK, - AUDATA5_MARK, SCK5_C_MARK, DU0_DB2_MARK, LCDOUT18_MARK, - DU0_DB3_MARK, LCDOUT19_MARK, DU0_DB4_MARK, LCDOUT20_MARK, - DU0_DB5_MARK, LCDOUT21_MARK, DU0_DB6_MARK, LCDOUT22_MARK, - DU0_DB7_MARK, LCDOUT23_MARK, DU0_DOTCLKIN_MARK, QSTVA_QVS_MARK, - TX3_D_IRDA_TX_D_MARK, SCL3_B_MARK, DU0_DOTCLKOUT0_MARK, QCLK_MARK, - DU0_DOTCLKOUT1_MARK, QSTVB_QVE_MARK, RX3_D_IRDA_RX_D_MARK, SDA3_B_MARK, - SDA2_C_MARK, DACK0_B_MARK, DRACK0_B_MARK, DU0_EXHSYNC_DU0_HSYNC_MARK, - QSTH_QHS_MARK, DU0_EXVSYNC_DU0_VSYNC_MARK, QSTB_QHE_MARK, - DU0_EXODDF_DU0_ODDF_DISP_CDE_MARK, QCPV_QDE_MARK, CAN1_TX_MARK, - TX2_C_MARK, SCL2_C_MARK, REMOCON_MARK, - - DU0_DISP_MARK, QPOLA_MARK, CAN_CLK_C_MARK, SCK2_C_MARK, - DU0_CDE_MARK, QPOLB_MARK, CAN1_RX_MARK, RX2_C_MARK, - DREQ0_B_MARK, SSI_SCK78_B_MARK, SCK0_B_MARK, DU1_DR0_MARK, - VI2_DATA0_VI2_B0_MARK, PWM6_MARK, SD3_CLK_MARK, TX3_E_IRDA_TX_E_MARK, - AUDCK_MARK, PWMFSW0_B_MARK, DU1_DR1_MARK, VI2_DATA1_VI2_B1_MARK, - PWM0_MARK, SD3_CMD_MARK, RX3_E_IRDA_RX_E_MARK, AUDSYNC_MARK, - CTS0_D_MARK, DU1_DR2_MARK, VI2_G0_MARK, DU1_DR3_MARK, - VI2_G1_MARK, DU1_DR4_MARK, VI2_G2_MARK, DU1_DR5_MARK, - VI2_G3_MARK, DU1_DR6_MARK, VI2_G4_MARK, DU1_DR7_MARK, - VI2_G5_MARK, DU1_DG0_MARK, VI2_DATA2_VI2_B2_MARK, SCL1_B_MARK, - SD3_DAT2_MARK, SCK3_E_MARK, AUDATA6_MARK, TX0_D_MARK, - DU1_DG1_MARK, VI2_DATA3_VI2_B3_MARK, SDA1_B_MARK, SD3_DAT3_MARK, - SCK5_MARK, AUDATA7_MARK, RX0_D_MARK, DU1_DG2_MARK, - VI2_G6_MARK, DU1_DG3_MARK, VI2_G7_MARK, DU1_DG4_MARK, - VI2_R0_MARK, DU1_DG5_MARK, VI2_R1_MARK, DU1_DG6_MARK, - VI2_R2_MARK, DU1_DG7_MARK, VI2_R3_MARK, DU1_DB0_MARK, - VI2_DATA4_VI2_B4_MARK, SCL2_B_MARK, SD3_DAT0_MARK, TX5_MARK, - SCK0_D_MARK, - - DU1_DB1_MARK, VI2_DATA5_VI2_B5_MARK, SDA2_B_MARK, SD3_DAT1_MARK, - RX5_MARK, RTS0_D_TANS_D_MARK, DU1_DB2_MARK, VI2_R4_MARK, - DU1_DB3_MARK, VI2_R5_MARK, DU1_DB4_MARK, VI2_R6_MARK, - DU1_DB5_MARK, VI2_R7_MARK, DU1_DB6_MARK, SCL2_D_MARK, - DU1_DB7_MARK, SDA2_D_MARK, DU1_DOTCLKIN_MARK, VI2_CLKENB_MARK, - HSPI_CS1_MARK, SCL1_D_MARK, DU1_DOTCLKOUT_MARK, VI2_FIELD_MARK, - SDA1_D_MARK, DU1_EXHSYNC_DU1_HSYNC_MARK, VI2_HSYNC_MARK, - VI3_HSYNC_MARK, DU1_EXVSYNC_DU1_VSYNC_MARK, VI2_VSYNC_MARK, - VI3_VSYNC_MARK, DU1_EXODDF_DU1_ODDF_DISP_CDE_MARK, VI2_CLK_MARK, - TX3_B_IRDA_TX_B_MARK, SD3_CD_MARK, HSPI_TX1_MARK, VI1_CLKENB_MARK, - VI3_CLKENB_MARK, AUDIO_CLKC_MARK, TX2_D_MARK, SPEEDIN_MARK, - GPS_SIGN_D_MARK, DU1_DISP_MARK, VI2_DATA6_VI2_B6_MARK, TCLK0_MARK, - QSTVA_B_QVS_B_MARK, HSPI_CLK1_MARK, SCK2_D_MARK, AUDIO_CLKOUT_B_MARK, - GPS_MAG_D_MARK, DU1_CDE_MARK, VI2_DATA7_VI2_B7_MARK, - RX3_B_IRDA_RX_B_MARK, SD3_WP_MARK, HSPI_RX1_MARK, VI1_FIELD_MARK, - VI3_FIELD_MARK, AUDIO_CLKOUT_MARK, RX2_D_MARK, GPS_CLK_C_MARK, - GPS_CLK_D_MARK, AUDIO_CLKA_MARK, CAN_TXCLK_MARK, AUDIO_CLKB_MARK, - USB_OVC2_MARK, CAN_DEBUGOUT0_MARK, MOUT0_MARK, - - SSI_SCK0129_MARK, CAN_DEBUGOUT1_MARK, MOUT1_MARK, SSI_WS0129_MARK, - CAN_DEBUGOUT2_MARK, MOUT2_MARK, SSI_SDATA0_MARK, CAN_DEBUGOUT3_MARK, - MOUT5_MARK, SSI_SDATA1_MARK, CAN_DEBUGOUT4_MARK, MOUT6_MARK, - SSI_SDATA2_MARK, CAN_DEBUGOUT5_MARK, SSI_SCK34_MARK, - CAN_DEBUGOUT6_MARK, CAN0_TX_B_MARK, IERX_MARK, SSI_SCK9_C_MARK, - SSI_WS34_MARK, CAN_DEBUGOUT7_MARK, CAN0_RX_B_MARK, IETX_MARK, - SSI_WS9_C_MARK, SSI_SDATA3_MARK, PWM0_C_MARK, CAN_DEBUGOUT8_MARK, - CAN_CLK_B_MARK, IECLK_MARK, SCIF_CLK_B_MARK, TCLK0_B_MARK, - SSI_SDATA4_MARK, CAN_DEBUGOUT9_MARK, SSI_SDATA9_C_MARK, SSI_SCK5_MARK, - ADICLK_MARK, CAN_DEBUGOUT10_MARK, SCK3_MARK, TCLK0_D_MARK, - SSI_WS5_MARK, ADICS_SAMP_MARK, CAN_DEBUGOUT11_MARK, TX3_IRDA_TX_MARK, - SSI_SDATA5_MARK, ADIDATA_MARK, CAN_DEBUGOUT12_MARK, RX3_IRDA_RX_MARK, - SSI_SCK6_MARK, ADICHS0_MARK, CAN0_TX_MARK, IERX_B_MARK, - - SSI_WS6_MARK, ADICHS1_MARK, CAN0_RX_MARK, IETX_B_MARK, - SSI_SDATA6_MARK, ADICHS2_MARK, CAN_CLK_MARK, IECLK_B_MARK, - SSI_SCK78_MARK, CAN_DEBUGOUT13_MARK, IRQ0_B_MARK, SSI_SCK9_B_MARK, - HSPI_CLK1_C_MARK, SSI_WS78_MARK, CAN_DEBUGOUT14_MARK, IRQ1_B_MARK, - SSI_WS9_B_MARK, HSPI_CS1_C_MARK, SSI_SDATA7_MARK, CAN_DEBUGOUT15_MARK, - IRQ2_B_MARK, TCLK1_C_MARK, HSPI_TX1_C_MARK, SSI_SDATA8_MARK, - VSP_MARK, IRQ3_B_MARK, HSPI_RX1_C_MARK, SD0_CLK_MARK, - ATACS01_MARK, SCK1_B_MARK, SD0_CMD_MARK, ATACS11_MARK, - TX1_B_MARK, CC5_TDO_MARK, SD0_DAT0_MARK, ATADIR1_MARK, - RX1_B_MARK, CC5_TRST_MARK, SD0_DAT1_MARK, ATAG1_MARK, - SCK2_B_MARK, CC5_TMS_MARK, SD0_DAT2_MARK, ATARD1_MARK, - TX2_B_MARK, CC5_TCK_MARK, SD0_DAT3_MARK, ATAWR1_MARK, - RX2_B_MARK, CC5_TDI_MARK, SD0_CD_MARK, DREQ2_MARK, - RTS1_B_TANS_B_MARK, SD0_WP_MARK, DACK2_MARK, CTS1_B_MARK, - - HSPI_CLK0_MARK, CTS0_MARK, USB_OVC0_MARK, AD_CLK_MARK, - CC5_STATE4_MARK, CC5_STATE12_MARK, CC5_STATE20_MARK, CC5_STATE28_MARK, - CC5_STATE36_MARK, HSPI_CS0_MARK, RTS0_TANS_MARK, USB_OVC1_MARK, - AD_DI_MARK, CC5_STATE5_MARK, CC5_STATE13_MARK, CC5_STATE21_MARK, - CC5_STATE29_MARK, CC5_STATE37_MARK, HSPI_TX0_MARK, TX0_MARK, - CAN_DEBUG_HW_TRIGGER_MARK, AD_DO_MARK, CC5_STATE6_MARK, - CC5_STATE14_MARK, CC5_STATE22_MARK, CC5_STATE30_MARK, - CC5_STATE38_MARK, HSPI_RX0_MARK, RX0_MARK, CAN_STEP0_MARK, - AD_NCS_MARK, CC5_STATE7_MARK, CC5_STATE15_MARK, CC5_STATE23_MARK, - CC5_STATE31_MARK, CC5_STATE39_MARK, FMCLK_MARK, RDS_CLK_MARK, - PCMOE_MARK, BPFCLK_MARK, PCMWE_MARK, FMIN_MARK, RDS_DATA_MARK, - VI0_CLK_MARK, MMC1_CLK_MARK, VI0_CLKENB_MARK, TX1_C_MARK, HTX1_B_MARK, - MT1_SYNC_MARK, VI0_FIELD_MARK, RX1_C_MARK, HRX1_B_MARK, - VI0_HSYNC_MARK, VI0_DATA0_B_VI0_B0_B_MARK, CTS1_C_MARK, TX4_D_MARK, - MMC1_CMD_MARK, HSCK1_B_MARK, VI0_VSYNC_MARK, VI0_DATA1_B_VI0_B1_B_MARK, - RTS1_C_TANS_C_MARK, RX4_D_MARK, PWMFSW0_C_MARK, - - VI0_DATA0_VI0_B0_MARK, HRTS1_B_MARK, MT1_VCXO_MARK, - VI0_DATA1_VI0_B1_MARK, HCTS1_B_MARK, MT1_PWM_MARK, - VI0_DATA2_VI0_B2_MARK, MMC1_D0_MARK, VI0_DATA3_VI0_B3_MARK, - MMC1_D1_MARK, VI0_DATA4_VI0_B4_MARK, MMC1_D2_MARK, - VI0_DATA5_VI0_B5_MARK, MMC1_D3_MARK, VI0_DATA6_VI0_B6_MARK, - MMC1_D4_MARK, ARM_TRACEDATA_0_MARK, VI0_DATA7_VI0_B7_MARK, - MMC1_D5_MARK, ARM_TRACEDATA_1_MARK, VI0_G0_MARK, SSI_SCK78_C_MARK, - IRQ0_MARK, ARM_TRACEDATA_2_MARK, VI0_G1_MARK, SSI_WS78_C_MARK, - IRQ1_MARK, ARM_TRACEDATA_3_MARK, VI0_G2_MARK, ETH_TXD1_MARK, - MMC1_D6_MARK, ARM_TRACEDATA_4_MARK, TS_SPSYNC0_MARK, VI0_G3_MARK, - ETH_CRS_DV_MARK, MMC1_D7_MARK, ARM_TRACEDATA_5_MARK, TS_SDAT0_MARK, - VI0_G4_MARK, ETH_TX_EN_MARK, SD2_DAT0_B_MARK, ARM_TRACEDATA_6_MARK, - VI0_G5_MARK, ETH_RX_ER_MARK, SD2_DAT1_B_MARK, ARM_TRACEDATA_7_MARK, - VI0_G6_MARK, ETH_RXD0_MARK, SD2_DAT2_B_MARK, ARM_TRACEDATA_8_MARK, - VI0_G7_MARK, ETH_RXD1_MARK, SD2_DAT3_B_MARK, ARM_TRACEDATA_9_MARK, - - VI0_R0_MARK, SSI_SDATA7_C_MARK, SCK1_C_MARK, DREQ1_B_MARK, - ARM_TRACEDATA_10_MARK, DREQ0_C_MARK, VI0_R1_MARK, SSI_SDATA8_C_MARK, - DACK1_B_MARK, ARM_TRACEDATA_11_MARK, DACK0_C_MARK, DRACK0_C_MARK, - VI0_R2_MARK, ETH_LINK_MARK, SD2_CLK_B_MARK, IRQ2_MARK, - ARM_TRACEDATA_12_MARK, VI0_R3_MARK, ETH_MAGIC_MARK, SD2_CMD_B_MARK, - IRQ3_MARK, ARM_TRACEDATA_13_MARK, VI0_R4_MARK, ETH_REFCLK_MARK, - SD2_CD_B_MARK, HSPI_CLK1_B_MARK, ARM_TRACEDATA_14_MARK, MT1_CLK_MARK, - TS_SCK0_MARK, VI0_R5_MARK, ETH_TXD0_MARK, SD2_WP_B_MARK, - HSPI_CS1_B_MARK, ARM_TRACEDATA_15_MARK, MT1_D_MARK, TS_SDEN0_MARK, - VI0_R6_MARK, ETH_MDC_MARK, DREQ2_C_MARK, HSPI_TX1_B_MARK, - TRACECLK_MARK, MT1_BEN_MARK, PWMFSW0_D_MARK, VI0_R7_MARK, - ETH_MDIO_MARK, DACK2_C_MARK, HSPI_RX1_B_MARK, SCIF_CLK_D_MARK, - TRACECTL_MARK, MT1_PEN_MARK, VI1_CLK_MARK, SIM_D_MARK, SDA3_MARK, - VI1_HSYNC_MARK, VI3_CLK_MARK, SSI_SCK4_MARK, GPS_SIGN_C_MARK, - PWMFSW0_E_MARK, VI1_VSYNC_MARK, AUDIO_CLKOUT_C_MARK, SSI_WS4_MARK, - SIM_CLK_MARK, GPS_MAG_C_MARK, SPV_TRST_MARK, SCL3_MARK, - - VI1_DATA0_VI1_B0_MARK, SD2_DAT0_MARK, SIM_RST_MARK, SPV_TCK_MARK, - ADICLK_B_MARK, VI1_DATA1_VI1_B1_MARK, SD2_DAT1_MARK, MT0_CLK_MARK, - SPV_TMS_MARK, ADICS_B_SAMP_B_MARK, VI1_DATA2_VI1_B2_MARK, - SD2_DAT2_MARK, MT0_D_MARK, SPVTDI_MARK, ADIDATA_B_MARK, - VI1_DATA3_VI1_B3_MARK, SD2_DAT3_MARK, MT0_BEN_MARK, SPV_TDO_MARK, - ADICHS0_B_MARK, VI1_DATA4_VI1_B4_MARK, SD2_CLK_MARK, MT0_PEN_MARK, - SPA_TRST_MARK, HSPI_CLK1_D_MARK, ADICHS1_B_MARK, - VI1_DATA5_VI1_B5_MARK, SD2_CMD_MARK, MT0_SYNC_MARK, SPA_TCK_MARK, - HSPI_CS1_D_MARK, ADICHS2_B_MARK, VI1_DATA6_VI1_B6_MARK, SD2_CD_MARK, - MT0_VCXO_MARK, SPA_TMS_MARK, HSPI_TX1_D_MARK, VI1_DATA7_VI1_B7_MARK, - SD2_WP_MARK, MT0_PWM_MARK, SPA_TDI_MARK, HSPI_RX1_D_MARK, - VI1_G0_MARK, VI3_DATA0_MARK, DU1_DOTCLKOUT1_MARK, TS_SCK1_MARK, - DREQ2_B_MARK, TX2_MARK, SPA_TDO_MARK, HCTS0_B_MARK, - VI1_G1_MARK, VI3_DATA1_MARK, SSI_SCK1_MARK, TS_SDEN1_MARK, - DACK2_B_MARK, RX2_MARK, HRTS0_B_MARK, - - VI1_G2_MARK, VI3_DATA2_MARK, SSI_WS1_MARK, TS_SPSYNC1_MARK, - SCK2_MARK, HSCK0_B_MARK, VI1_G3_MARK, VI3_DATA3_MARK, - SSI_SCK2_MARK, TS_SDAT1_MARK, SCL1_C_MARK, HTX0_B_MARK, - VI1_G4_MARK, VI3_DATA4_MARK, SSI_WS2_MARK, SDA1_C_MARK, - SIM_RST_B_MARK, HRX0_B_MARK, VI1_G5_MARK, VI3_DATA5_MARK, - GPS_CLK_MARK, FSE_MARK, TX4_B_MARK, SIM_D_B_MARK, - VI1_G6_MARK, VI3_DATA6_MARK, GPS_SIGN_MARK, FRB_MARK, - RX4_B_MARK, SIM_CLK_B_MARK, VI1_G7_MARK, VI3_DATA7_MARK, - GPS_MAG_MARK, FCE_MARK, SCK4_B_MARK, - PINMUX_MARK_END, -}; - -static pinmux_enum_t pinmux_data[] = { - PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */ - - PINMUX_DATA(AVS1_MARK, FN_AVS1), - PINMUX_DATA(AVS1_MARK, FN_AVS1), - PINMUX_DATA(A17_MARK, FN_A17), - PINMUX_DATA(A18_MARK, FN_A18), - PINMUX_DATA(A19_MARK, FN_A19), - - PINMUX_IPSR_DATA(IP0_2_0, USB_PENC2), - PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCK0, SEL_SCIF0_0), - PINMUX_IPSR_DATA(IP0_2_0, PWM1), - PINMUX_IPSR_MODSEL_DATA(IP0_2_0, PWMFSW0, SEL_PWMFSW_0), - PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCIF_CLK, SEL_SCIF_0), - PINMUX_IPSR_MODSEL_DATA(IP0_2_0, TCLK0_C, SEL_TMU0_2), - PINMUX_IPSR_DATA(IP0_5_3, BS), - PINMUX_IPSR_DATA(IP0_5_3, SD1_DAT2), - PINMUX_IPSR_DATA(IP0_5_3, MMC0_D2), - PINMUX_IPSR_DATA(IP0_5_3, FD2), - PINMUX_IPSR_DATA(IP0_5_3, ATADIR0), - PINMUX_IPSR_DATA(IP0_5_3, SDSELF), - PINMUX_IPSR_MODSEL_DATA(IP0_5_3, HCTS1, SEL_HSCIF1_0), - PINMUX_IPSR_DATA(IP0_5_3, TX4_C), - PINMUX_IPSR_DATA(IP0_7_6, A0), - PINMUX_IPSR_DATA(IP0_7_6, SD1_DAT3), - PINMUX_IPSR_DATA(IP0_7_6, MMC0_D3), - PINMUX_IPSR_DATA(IP0_7_6, FD3), - PINMUX_IPSR_DATA(IP0_9_8, A20), - PINMUX_IPSR_DATA(IP0_9_8, TX5_D), - PINMUX_IPSR_DATA(IP0_9_8, HSPI_TX2_B), - PINMUX_IPSR_DATA(IP0_11_10, A21), - PINMUX_IPSR_MODSEL_DATA(IP0_11_10, SCK5_D, SEL_SCIF5_3), - PINMUX_IPSR_MODSEL_DATA(IP0_11_10, HSPI_CLK2_B, SEL_HSPI2_1), - PINMUX_IPSR_DATA(IP0_13_12, A22), - PINMUX_IPSR_MODSEL_DATA(IP0_13_12, RX5_D, SEL_SCIF5_3), - PINMUX_IPSR_MODSEL_DATA(IP0_13_12, HSPI_RX2_B, SEL_HSPI2_1), - PINMUX_IPSR_DATA(IP0_13_12, VI1_R0), - PINMUX_IPSR_DATA(IP0_15_14, A23), - PINMUX_IPSR_DATA(IP0_15_14, FCLE), - PINMUX_IPSR_MODSEL_DATA(IP0_15_14, HSPI_CLK2, SEL_HSPI2_0), - PINMUX_IPSR_DATA(IP0_15_14, VI1_R1), - PINMUX_IPSR_DATA(IP0_18_16, A24), - PINMUX_IPSR_DATA(IP0_18_16, SD1_CD), - PINMUX_IPSR_DATA(IP0_18_16, MMC0_D4), - PINMUX_IPSR_DATA(IP0_18_16, FD4), - PINMUX_IPSR_MODSEL_DATA(IP0_18_16, HSPI_CS2, SEL_HSPI2_0), - PINMUX_IPSR_DATA(IP0_18_16, VI1_R2), - PINMUX_IPSR_MODSEL_DATA(IP0_18_16, SSI_WS78_B, SEL_SSI7_1), - PINMUX_IPSR_DATA(IP0_22_19, A25), - PINMUX_IPSR_DATA(IP0_22_19, SD1_WP), - PINMUX_IPSR_DATA(IP0_22_19, MMC0_D5), - PINMUX_IPSR_DATA(IP0_22_19, FD5), - PINMUX_IPSR_MODSEL_DATA(IP0_22_19, HSPI_RX2, SEL_HSPI2_0), - PINMUX_IPSR_DATA(IP0_22_19, VI1_R3), - PINMUX_IPSR_DATA(IP0_22_19, TX5_B), - PINMUX_IPSR_MODSEL_DATA(IP0_22_19, SSI_SDATA7_B, SEL_SSI7_1), - PINMUX_IPSR_MODSEL_DATA(IP0_22_19, CTS0_B, SEL_SCIF0_1), - PINMUX_IPSR_DATA(IP0_24_23, CLKOUT), - PINMUX_IPSR_DATA(IP0_24_23, TX3C_IRDA_TX_C), - PINMUX_IPSR_DATA(IP0_24_23, PWM0_B), - PINMUX_IPSR_DATA(IP0_25, CS0), - PINMUX_IPSR_MODSEL_DATA(IP0_25, HSPI_CS2_B, SEL_HSPI2_1), - PINMUX_IPSR_DATA(IP0_27_26, CS1_A26), - PINMUX_IPSR_DATA(IP0_27_26, HSPI_TX2), - PINMUX_IPSR_DATA(IP0_27_26, SDSELF_B), - PINMUX_IPSR_DATA(IP0_30_28, RD_WR), - PINMUX_IPSR_DATA(IP0_30_28, FWE), - PINMUX_IPSR_DATA(IP0_30_28, ATAG0), - PINMUX_IPSR_DATA(IP0_30_28, VI1_R7), - PINMUX_IPSR_MODSEL_DATA(IP0_30_28, HRTS1, SEL_HSCIF1_0), - PINMUX_IPSR_MODSEL_DATA(IP0_30_28, RX4_C, SEL_SCIF4_2), - - PINMUX_IPSR_DATA(IP1_1_0, EX_CS0), - PINMUX_IPSR_MODSEL_DATA(IP1_1_0, RX3_C_IRDA_RX_C, SEL_SCIF3_2), - PINMUX_IPSR_DATA(IP1_1_0, MMC0_D6), - PINMUX_IPSR_DATA(IP1_1_0, FD6), - PINMUX_IPSR_DATA(IP1_3_2, EX_CS1), - PINMUX_IPSR_DATA(IP1_3_2, MMC0_D7), - PINMUX_IPSR_DATA(IP1_3_2, FD7), - PINMUX_IPSR_DATA(IP1_6_4, EX_CS2), - PINMUX_IPSR_DATA(IP1_6_4, SD1_CLK), - PINMUX_IPSR_DATA(IP1_6_4, MMC0_CLK), - PINMUX_IPSR_DATA(IP1_6_4, FALE), - PINMUX_IPSR_DATA(IP1_6_4, ATACS00), - PINMUX_IPSR_DATA(IP1_10_7, EX_CS3), - PINMUX_IPSR_DATA(IP1_10_7, SD1_CMD), - PINMUX_IPSR_DATA(IP1_10_7, MMC0_CMD), - PINMUX_IPSR_DATA(IP1_10_7, FRE), - PINMUX_IPSR_DATA(IP1_10_7, ATACS10), - PINMUX_IPSR_DATA(IP1_10_7, VI1_R4), - PINMUX_IPSR_MODSEL_DATA(IP1_10_7, RX5_B, SEL_SCIF5_1), - PINMUX_IPSR_MODSEL_DATA(IP1_10_7, HSCK1, SEL_HSCIF1_0), - PINMUX_IPSR_MODSEL_DATA(IP1_10_7, SSI_SDATA8_B, SEL_SSI8_1), - PINMUX_IPSR_MODSEL_DATA(IP1_10_7, RTS0_B_TANS_B, SEL_SCIF0_1), - PINMUX_IPSR_MODSEL_DATA(IP1_10_7, SSI_SDATA9, SEL_SSI9_0), - PINMUX_IPSR_DATA(IP1_14_11, EX_CS4), - PINMUX_IPSR_DATA(IP1_14_11, SD1_DAT0), - PINMUX_IPSR_DATA(IP1_14_11, MMC0_D0), - PINMUX_IPSR_DATA(IP1_14_11, FD0), - PINMUX_IPSR_DATA(IP1_14_11, ATARD0), - PINMUX_IPSR_DATA(IP1_14_11, VI1_R5), - PINMUX_IPSR_MODSEL_DATA(IP1_14_11, SCK5_B, SEL_SCIF5_1), - PINMUX_IPSR_DATA(IP1_14_11, HTX1), - PINMUX_IPSR_DATA(IP1_14_11, TX2_E), - PINMUX_IPSR_DATA(IP1_14_11, TX0_B), - PINMUX_IPSR_MODSEL_DATA(IP1_14_11, SSI_SCK9, SEL_SSI9_0), - PINMUX_IPSR_DATA(IP1_18_15, EX_CS5), - PINMUX_IPSR_DATA(IP1_18_15, SD1_DAT1), - PINMUX_IPSR_DATA(IP1_18_15, MMC0_D1), - PINMUX_IPSR_DATA(IP1_18_15, FD1), - PINMUX_IPSR_DATA(IP1_18_15, ATAWR0), - PINMUX_IPSR_DATA(IP1_18_15, VI1_R6), - PINMUX_IPSR_MODSEL_DATA(IP1_18_15, HRX1, SEL_HSCIF1_0), - PINMUX_IPSR_MODSEL_DATA(IP1_18_15, RX2_E, SEL_SCIF2_4), - PINMUX_IPSR_MODSEL_DATA(IP1_18_15, RX0_B, SEL_SCIF0_1), - PINMUX_IPSR_MODSEL_DATA(IP1_18_15, SSI_WS9, SEL_SSI9_0), - PINMUX_IPSR_DATA(IP1_20_19, MLB_CLK), - PINMUX_IPSR_DATA(IP1_20_19, PWM2), - PINMUX_IPSR_MODSEL_DATA(IP1_20_19, SCK4, SEL_SCIF4_0), - PINMUX_IPSR_DATA(IP1_22_21, MLB_SIG), - PINMUX_IPSR_DATA(IP1_22_21, PWM3), - PINMUX_IPSR_DATA(IP1_22_21, TX4), - PINMUX_IPSR_DATA(IP1_24_23, MLB_DAT), - PINMUX_IPSR_DATA(IP1_24_23, PWM4), - PINMUX_IPSR_MODSEL_DATA(IP1_24_23, RX4, SEL_SCIF4_0), - PINMUX_IPSR_DATA(IP1_28_25, HTX0), - PINMUX_IPSR_DATA(IP1_28_25, TX1), - PINMUX_IPSR_DATA(IP1_28_25, SDATA), - PINMUX_IPSR_MODSEL_DATA(IP1_28_25, CTS0_C, SEL_SCIF0_2), - PINMUX_IPSR_DATA(IP1_28_25, SUB_TCK), - PINMUX_IPSR_DATA(IP1_28_25, CC5_STATE2), - PINMUX_IPSR_DATA(IP1_28_25, CC5_STATE10), - PINMUX_IPSR_DATA(IP1_28_25, CC5_STATE18), - PINMUX_IPSR_DATA(IP1_28_25, CC5_STATE26), - PINMUX_IPSR_DATA(IP1_28_25, CC5_STATE34), - - PINMUX_IPSR_MODSEL_DATA(IP2_3_0, HRX0, SEL_HSCIF0_0), - PINMUX_IPSR_MODSEL_DATA(IP2_3_0, RX1, SEL_SCIF1_0), - PINMUX_IPSR_DATA(IP2_3_0, SCKZ), - PINMUX_IPSR_MODSEL_DATA(IP2_3_0, RTS0_C_TANS_C, SEL_SCIF0_2), - PINMUX_IPSR_DATA(IP2_3_0, SUB_TDI), - PINMUX_IPSR_DATA(IP2_3_0, CC5_STATE3), - PINMUX_IPSR_DATA(IP2_3_0, CC5_STATE11), - PINMUX_IPSR_DATA(IP2_3_0, CC5_STATE19), - PINMUX_IPSR_DATA(IP2_3_0, CC5_STATE27), - PINMUX_IPSR_DATA(IP2_3_0, CC5_STATE35), - PINMUX_IPSR_MODSEL_DATA(IP2_7_4, HSCK0, SEL_HSCIF0_0), - PINMUX_IPSR_MODSEL_DATA(IP2_7_4, SCK1, SEL_SCIF1_0), - PINMUX_IPSR_DATA(IP2_7_4, MTS), - PINMUX_IPSR_DATA(IP2_7_4, PWM5), - PINMUX_IPSR_MODSEL_DATA(IP2_7_4, SCK0_C, SEL_SCIF0_2), - PINMUX_IPSR_MODSEL_DATA(IP2_7_4, SSI_SDATA9_B, SEL_SSI9_1), - PINMUX_IPSR_DATA(IP2_7_4, SUB_TDO), - PINMUX_IPSR_DATA(IP2_7_4, CC5_STATE0), - PINMUX_IPSR_DATA(IP2_7_4, CC5_STATE8), - PINMUX_IPSR_DATA(IP2_7_4, CC5_STATE16), - PINMUX_IPSR_DATA(IP2_7_4, CC5_STATE24), - PINMUX_IPSR_DATA(IP2_7_4, CC5_STATE32), - PINMUX_IPSR_MODSEL_DATA(IP2_11_8, HCTS0, SEL_HSCIF0_0), - PINMUX_IPSR_MODSEL_DATA(IP2_11_8, CTS1, SEL_SCIF1_0), - PINMUX_IPSR_DATA(IP2_11_8, STM), - PINMUX_IPSR_DATA(IP2_11_8, PWM0_D), - PINMUX_IPSR_MODSEL_DATA(IP2_11_8, RX0_C, SEL_SCIF0_2), - PINMUX_IPSR_MODSEL_DATA(IP2_11_8, SCIF_CLK_C, SEL_SCIF_2), - PINMUX_IPSR_DATA(IP2_11_8, SUB_TRST), - PINMUX_IPSR_MODSEL_DATA(IP2_11_8, TCLK1_B, SEL_TMU1_1), - PINMUX_IPSR_DATA(IP2_11_8, CC5_OSCOUT), - PINMUX_IPSR_MODSEL_DATA(IP2_15_12, HRTS0, SEL_HSCIF0_0), - PINMUX_IPSR_MODSEL_DATA(IP2_15_12, RTS1_TANS, SEL_SCIF1_0), - PINMUX_IPSR_DATA(IP2_15_12, MDATA), - PINMUX_IPSR_DATA(IP2_15_12, TX0_C), - PINMUX_IPSR_DATA(IP2_15_12, SUB_TMS), - PINMUX_IPSR_DATA(IP2_15_12, CC5_STATE1), - PINMUX_IPSR_DATA(IP2_15_12, CC5_STATE9), - PINMUX_IPSR_DATA(IP2_15_12, CC5_STATE17), - PINMUX_IPSR_DATA(IP2_15_12, CC5_STATE25), - PINMUX_IPSR_DATA(IP2_15_12, CC5_STATE33), - PINMUX_IPSR_DATA(IP2_18_16, DU0_DR0), - PINMUX_IPSR_DATA(IP2_18_16, LCDOUT0), - PINMUX_IPSR_MODSEL_DATA(IP2_18_16, DREQ0, SEL_EXBUS0_0), - PINMUX_IPSR_MODSEL_DATA(IP2_18_16, GPS_CLK_B, SEL_GPS_1), - PINMUX_IPSR_DATA(IP2_18_16, AUDATA0), - PINMUX_IPSR_DATA(IP2_18_16, TX5_C), - PINMUX_IPSR_DATA(IP2_21_19, DU0_DR1), - PINMUX_IPSR_DATA(IP2_21_19, LCDOUT1), - PINMUX_IPSR_DATA(IP2_21_19, DACK0), - PINMUX_IPSR_DATA(IP2_21_19, DRACK0), - PINMUX_IPSR_MODSEL_DATA(IP2_21_19, GPS_SIGN_B, SEL_GPS_1), - PINMUX_IPSR_DATA(IP2_21_19, AUDATA1), - PINMUX_IPSR_MODSEL_DATA(IP2_21_19, RX5_C, SEL_SCIF5_2), - PINMUX_IPSR_DATA(IP2_22, DU0_DR2), - PINMUX_IPSR_DATA(IP2_22, LCDOUT2), - PINMUX_IPSR_DATA(IP2_23, DU0_DR3), - PINMUX_IPSR_DATA(IP2_23, LCDOUT3), - PINMUX_IPSR_DATA(IP2_24, DU0_DR4), - PINMUX_IPSR_DATA(IP2_24, LCDOUT4), - PINMUX_IPSR_DATA(IP2_25, DU0_DR5), - PINMUX_IPSR_DATA(IP2_25, LCDOUT5), - PINMUX_IPSR_DATA(IP2_26, DU0_DR6), - PINMUX_IPSR_DATA(IP2_26, LCDOUT6), - PINMUX_IPSR_DATA(IP2_27, DU0_DR7), - PINMUX_IPSR_DATA(IP2_27, LCDOUT7), - PINMUX_IPSR_DATA(IP2_30_28, DU0_DG0), - PINMUX_IPSR_DATA(IP2_30_28, LCDOUT8), - PINMUX_IPSR_MODSEL_DATA(IP2_30_28, DREQ1, SEL_EXBUS1_0), - PINMUX_IPSR_MODSEL_DATA(IP2_30_28, SCL2, SEL_I2C2_0), - PINMUX_IPSR_DATA(IP2_30_28, AUDATA2), - - PINMUX_IPSR_DATA(IP3_2_0, DU0_DG1), - PINMUX_IPSR_DATA(IP3_2_0, LCDOUT9), - PINMUX_IPSR_DATA(IP3_2_0, DACK1), - PINMUX_IPSR_MODSEL_DATA(IP3_2_0, SDA2, SEL_I2C2_0), - PINMUX_IPSR_DATA(IP3_2_0, AUDATA3), - PINMUX_IPSR_DATA(IP3_3, DU0_DG2), - PINMUX_IPSR_DATA(IP3_3, LCDOUT10), - PINMUX_IPSR_DATA(IP3_4, DU0_DG3), - PINMUX_IPSR_DATA(IP3_4, LCDOUT11), - PINMUX_IPSR_DATA(IP3_5, DU0_DG4), - PINMUX_IPSR_DATA(IP3_5, LCDOUT12), - PINMUX_IPSR_DATA(IP3_6, DU0_DG5), - PINMUX_IPSR_DATA(IP3_6, LCDOUT13), - PINMUX_IPSR_DATA(IP3_7, DU0_DG6), - PINMUX_IPSR_DATA(IP3_7, LCDOUT14), - PINMUX_IPSR_DATA(IP3_8, DU0_DG7), - PINMUX_IPSR_DATA(IP3_8, LCDOUT15), - PINMUX_IPSR_DATA(IP3_11_9, DU0_DB0), - PINMUX_IPSR_DATA(IP3_11_9, LCDOUT16), - PINMUX_IPSR_DATA(IP3_11_9, EX_WAIT1), - PINMUX_IPSR_MODSEL_DATA(IP3_11_9, SCL1, SEL_I2C1_0), - PINMUX_IPSR_MODSEL_DATA(IP3_11_9, TCLK1, SEL_TMU1_0), - PINMUX_IPSR_DATA(IP3_11_9, AUDATA4), - PINMUX_IPSR_DATA(IP3_14_12, DU0_DB1), - PINMUX_IPSR_DATA(IP3_14_12, LCDOUT17), - PINMUX_IPSR_DATA(IP3_14_12, EX_WAIT2), - PINMUX_IPSR_MODSEL_DATA(IP3_14_12, SDA1, SEL_I2C1_0), - PINMUX_IPSR_MODSEL_DATA(IP3_14_12, GPS_MAG_B, SEL_GPS_1), - PINMUX_IPSR_DATA(IP3_14_12, AUDATA5), - PINMUX_IPSR_MODSEL_DATA(IP3_14_12, SCK5_C, SEL_SCIF5_2), - PINMUX_IPSR_DATA(IP3_15, DU0_DB2), - PINMUX_IPSR_DATA(IP3_15, LCDOUT18), - PINMUX_IPSR_DATA(IP3_16, DU0_DB3), - PINMUX_IPSR_DATA(IP3_16, LCDOUT19), - PINMUX_IPSR_DATA(IP3_17, DU0_DB4), - PINMUX_IPSR_DATA(IP3_17, LCDOUT20), - PINMUX_IPSR_DATA(IP3_18, DU0_DB5), - PINMUX_IPSR_DATA(IP3_18, LCDOUT21), - PINMUX_IPSR_DATA(IP3_19, DU0_DB6), - PINMUX_IPSR_DATA(IP3_19, LCDOUT22), - PINMUX_IPSR_DATA(IP3_20, DU0_DB7), - PINMUX_IPSR_DATA(IP3_20, LCDOUT23), - PINMUX_IPSR_DATA(IP3_22_21, DU0_DOTCLKIN), - PINMUX_IPSR_DATA(IP3_22_21, QSTVA_QVS), - PINMUX_IPSR_DATA(IP3_22_21, TX3_D_IRDA_TX_D), - PINMUX_IPSR_MODSEL_DATA(IP3_22_21, SCL3_B, SEL_I2C3_1), - PINMUX_IPSR_DATA(IP3_23, DU0_DOTCLKOUT0), - PINMUX_IPSR_DATA(IP3_23, QCLK), - PINMUX_IPSR_DATA(IP3_26_24, DU0_DOTCLKOUT1), - PINMUX_IPSR_DATA(IP3_26_24, QSTVB_QVE), - PINMUX_IPSR_MODSEL_DATA(IP3_26_24, RX3_D_IRDA_RX_D, SEL_SCIF3_3), - PINMUX_IPSR_MODSEL_DATA(IP3_26_24, SDA3_B, SEL_I2C3_1), - PINMUX_IPSR_MODSEL_DATA(IP3_26_24, SDA2_C, SEL_I2C2_2), - PINMUX_IPSR_DATA(IP3_26_24, DACK0_B), - PINMUX_IPSR_DATA(IP3_26_24, DRACK0_B), - PINMUX_IPSR_DATA(IP3_27, DU0_EXHSYNC_DU0_HSYNC), - PINMUX_IPSR_DATA(IP3_27, QSTH_QHS), - PINMUX_IPSR_DATA(IP3_28, DU0_EXVSYNC_DU0_VSYNC), - PINMUX_IPSR_DATA(IP3_28, QSTB_QHE), - PINMUX_IPSR_DATA(IP3_31_29, DU0_EXODDF_DU0_ODDF_DISP_CDE), - PINMUX_IPSR_DATA(IP3_31_29, QCPV_QDE), - PINMUX_IPSR_DATA(IP3_31_29, CAN1_TX), - PINMUX_IPSR_DATA(IP3_31_29, TX2_C), - PINMUX_IPSR_MODSEL_DATA(IP3_31_29, SCL2_C, SEL_I2C2_2), - PINMUX_IPSR_DATA(IP3_31_29, REMOCON), - - PINMUX_IPSR_DATA(IP4_1_0, DU0_DISP), - PINMUX_IPSR_DATA(IP4_1_0, QPOLA), - PINMUX_IPSR_MODSEL_DATA(IP4_1_0, CAN_CLK_C, SEL_CANCLK_2), - PINMUX_IPSR_MODSEL_DATA(IP4_1_0, SCK2_C, SEL_SCIF2_2), - PINMUX_IPSR_DATA(IP4_4_2, DU0_CDE), - PINMUX_IPSR_DATA(IP4_4_2, QPOLB), - PINMUX_IPSR_DATA(IP4_4_2, CAN1_RX), - PINMUX_IPSR_MODSEL_DATA(IP4_4_2, RX2_C, SEL_SCIF2_2), - PINMUX_IPSR_MODSEL_DATA(IP4_4_2, DREQ0_B, SEL_EXBUS0_1), - PINMUX_IPSR_MODSEL_DATA(IP4_4_2, SSI_SCK78_B, SEL_SSI7_1), - PINMUX_IPSR_MODSEL_DATA(IP4_4_2, SCK0_B, SEL_SCIF0_1), - PINMUX_IPSR_DATA(IP4_7_5, DU1_DR0), - PINMUX_IPSR_DATA(IP4_7_5, VI2_DATA0_VI2_B0), - PINMUX_IPSR_DATA(IP4_7_5, PWM6), - PINMUX_IPSR_DATA(IP4_7_5, SD3_CLK), - PINMUX_IPSR_DATA(IP4_7_5, TX3_E_IRDA_TX_E), - PINMUX_IPSR_DATA(IP4_7_5, AUDCK), - PINMUX_IPSR_MODSEL_DATA(IP4_7_5, PWMFSW0_B, SEL_PWMFSW_1), - PINMUX_IPSR_DATA(IP4_10_8, DU1_DR1), - PINMUX_IPSR_DATA(IP4_10_8, VI2_DATA1_VI2_B1), - PINMUX_IPSR_DATA(IP4_10_8, PWM0), - PINMUX_IPSR_DATA(IP4_10_8, SD3_CMD), - PINMUX_IPSR_MODSEL_DATA(IP4_10_8, RX3_E_IRDA_RX_E, SEL_SCIF3_4), - PINMUX_IPSR_DATA(IP4_10_8, AUDSYNC), - PINMUX_IPSR_MODSEL_DATA(IP4_10_8, CTS0_D, SEL_SCIF0_3), - PINMUX_IPSR_DATA(IP4_11, DU1_DR2), - PINMUX_IPSR_DATA(IP4_11, VI2_G0), - PINMUX_IPSR_DATA(IP4_12, DU1_DR3), - PINMUX_IPSR_DATA(IP4_12, VI2_G1), - PINMUX_IPSR_DATA(IP4_13, DU1_DR4), - PINMUX_IPSR_DATA(IP4_13, VI2_G2), - PINMUX_IPSR_DATA(IP4_14, DU1_DR5), - PINMUX_IPSR_DATA(IP4_14, VI2_G3), - PINMUX_IPSR_DATA(IP4_15, DU1_DR6), - PINMUX_IPSR_DATA(IP4_15, VI2_G4), - PINMUX_IPSR_DATA(IP4_16, DU1_DR7), - PINMUX_IPSR_DATA(IP4_16, VI2_G5), - PINMUX_IPSR_DATA(IP4_19_17, DU1_DG0), - PINMUX_IPSR_DATA(IP4_19_17, VI2_DATA2_VI2_B2), - PINMUX_IPSR_MODSEL_DATA(IP4_19_17, SCL1_B, SEL_I2C1_1), - PINMUX_IPSR_DATA(IP4_19_17, SD3_DAT2), - PINMUX_IPSR_MODSEL_DATA(IP4_19_17, SCK3_E, SEL_SCIF3_4), - PINMUX_IPSR_DATA(IP4_19_17, AUDATA6), - PINMUX_IPSR_DATA(IP4_19_17, TX0_D), - PINMUX_IPSR_DATA(IP4_22_20, DU1_DG1), - PINMUX_IPSR_DATA(IP4_22_20, VI2_DATA3_VI2_B3), - PINMUX_IPSR_MODSEL_DATA(IP4_22_20, SDA1_B, SEL_I2C1_1), - PINMUX_IPSR_DATA(IP4_22_20, SD3_DAT3), - PINMUX_IPSR_MODSEL_DATA(IP4_22_20, SCK5, SEL_SCIF5_0), - PINMUX_IPSR_DATA(IP4_22_20, AUDATA7), - PINMUX_IPSR_MODSEL_DATA(IP4_22_20, RX0_D, SEL_SCIF0_3), - PINMUX_IPSR_DATA(IP4_23, DU1_DG2), - PINMUX_IPSR_DATA(IP4_23, VI2_G6), - PINMUX_IPSR_DATA(IP4_24, DU1_DG3), - PINMUX_IPSR_DATA(IP4_24, VI2_G7), - PINMUX_IPSR_DATA(IP4_25, DU1_DG4), - PINMUX_IPSR_DATA(IP4_25, VI2_R0), - PINMUX_IPSR_DATA(IP4_26, DU1_DG5), - PINMUX_IPSR_DATA(IP4_26, VI2_R1), - PINMUX_IPSR_DATA(IP4_27, DU1_DG6), - PINMUX_IPSR_DATA(IP4_27, VI2_R2), - PINMUX_IPSR_DATA(IP4_28, DU1_DG7), - PINMUX_IPSR_DATA(IP4_28, VI2_R3), - PINMUX_IPSR_DATA(IP4_31_29, DU1_DB0), - PINMUX_IPSR_DATA(IP4_31_29, VI2_DATA4_VI2_B4), - PINMUX_IPSR_MODSEL_DATA(IP4_31_29, SCL2_B, SEL_I2C2_1), - PINMUX_IPSR_DATA(IP4_31_29, SD3_DAT0), - PINMUX_IPSR_DATA(IP4_31_29, TX5), - PINMUX_IPSR_MODSEL_DATA(IP4_31_29, SCK0_D, SEL_SCIF0_3), - - PINMUX_IPSR_DATA(IP5_2_0, DU1_DB1), - PINMUX_IPSR_DATA(IP5_2_0, VI2_DATA5_VI2_B5), - PINMUX_IPSR_MODSEL_DATA(IP5_2_0, SDA2_B, SEL_I2C2_1), - PINMUX_IPSR_DATA(IP5_2_0, SD3_DAT1), - PINMUX_IPSR_MODSEL_DATA(IP5_2_0, RX5, SEL_SCIF5_0), - PINMUX_IPSR_MODSEL_DATA(IP5_2_0, RTS0_D_TANS_D, SEL_SCIF0_3), - PINMUX_IPSR_DATA(IP5_3, DU1_DB2), - PINMUX_IPSR_DATA(IP5_3, VI2_R4), - PINMUX_IPSR_DATA(IP5_4, DU1_DB3), - PINMUX_IPSR_DATA(IP5_4, VI2_R5), - PINMUX_IPSR_DATA(IP5_5, DU1_DB4), - PINMUX_IPSR_DATA(IP5_5, VI2_R6), - PINMUX_IPSR_DATA(IP5_6, DU1_DB5), - PINMUX_IPSR_DATA(IP5_6, VI2_R7), - PINMUX_IPSR_DATA(IP5_7, DU1_DB6), - PINMUX_IPSR_MODSEL_DATA(IP5_7, SCL2_D, SEL_I2C2_3), - PINMUX_IPSR_DATA(IP5_8, DU1_DB7), - PINMUX_IPSR_MODSEL_DATA(IP5_8, SDA2_D, SEL_I2C2_3), - PINMUX_IPSR_DATA(IP5_10_9, DU1_DOTCLKIN), - PINMUX_IPSR_DATA(IP5_10_9, VI2_CLKENB), - PINMUX_IPSR_MODSEL_DATA(IP5_10_9, HSPI_CS1, SEL_HSPI1_0), - PINMUX_IPSR_MODSEL_DATA(IP5_10_9, SCL1_D, SEL_I2C1_3), - PINMUX_IPSR_DATA(IP5_12_11, DU1_DOTCLKOUT), - PINMUX_IPSR_DATA(IP5_12_11, VI2_FIELD), - PINMUX_IPSR_MODSEL_DATA(IP5_12_11, SDA1_D, SEL_I2C1_3), - PINMUX_IPSR_DATA(IP5_14_13, DU1_EXHSYNC_DU1_HSYNC), - PINMUX_IPSR_DATA(IP5_14_13, VI2_HSYNC), - PINMUX_IPSR_DATA(IP5_14_13, VI3_HSYNC), - PINMUX_IPSR_DATA(IP5_16_15, DU1_EXVSYNC_DU1_VSYNC), - PINMUX_IPSR_DATA(IP5_16_15, VI2_VSYNC), - PINMUX_IPSR_DATA(IP5_16_15, VI3_VSYNC), - PINMUX_IPSR_DATA(IP5_20_17, DU1_EXODDF_DU1_ODDF_DISP_CDE), - PINMUX_IPSR_DATA(IP5_20_17, VI2_CLK), - PINMUX_IPSR_DATA(IP5_20_17, TX3_B_IRDA_TX_B), - PINMUX_IPSR_DATA(IP5_20_17, SD3_CD), - PINMUX_IPSR_DATA(IP5_20_17, HSPI_TX1), - PINMUX_IPSR_DATA(IP5_20_17, VI1_CLKENB), - PINMUX_IPSR_DATA(IP5_20_17, VI3_CLKENB), - PINMUX_IPSR_DATA(IP5_20_17, AUDIO_CLKC), - PINMUX_IPSR_DATA(IP5_20_17, TX2_D), - PINMUX_IPSR_DATA(IP5_20_17, SPEEDIN), - PINMUX_IPSR_MODSEL_DATA(IP5_20_17, GPS_SIGN_D, SEL_GPS_3), - PINMUX_IPSR_DATA(IP5_23_21, DU1_DISP), - PINMUX_IPSR_DATA(IP5_23_21, VI2_DATA6_VI2_B6), - PINMUX_IPSR_MODSEL_DATA(IP5_23_21, TCLK0, SEL_TMU0_0), - PINMUX_IPSR_DATA(IP5_23_21, QSTVA_B_QVS_B), - PINMUX_IPSR_MODSEL_DATA(IP5_23_21, HSPI_CLK1, SEL_HSPI1_0), - PINMUX_IPSR_MODSEL_DATA(IP5_23_21, SCK2_D, SEL_SCIF2_3), - PINMUX_IPSR_DATA(IP5_23_21, AUDIO_CLKOUT_B), - PINMUX_IPSR_MODSEL_DATA(IP5_23_21, GPS_MAG_D, SEL_GPS_3), - PINMUX_IPSR_DATA(IP5_27_24, DU1_CDE), - PINMUX_IPSR_DATA(IP5_27_24, VI2_DATA7_VI2_B7), - PINMUX_IPSR_MODSEL_DATA(IP5_27_24, RX3_B_IRDA_RX_B, SEL_SCIF3_1), - PINMUX_IPSR_DATA(IP5_27_24, SD3_WP), - PINMUX_IPSR_MODSEL_DATA(IP5_27_24, HSPI_RX1, SEL_HSPI1_0), - PINMUX_IPSR_DATA(IP5_27_24, VI1_FIELD), - PINMUX_IPSR_DATA(IP5_27_24, VI3_FIELD), - PINMUX_IPSR_DATA(IP5_27_24, AUDIO_CLKOUT), - PINMUX_IPSR_MODSEL_DATA(IP5_27_24, RX2_D, SEL_SCIF2_3), - PINMUX_IPSR_MODSEL_DATA(IP5_27_24, GPS_CLK_C, SEL_GPS_2), - PINMUX_IPSR_MODSEL_DATA(IP5_27_24, GPS_CLK_D, SEL_GPS_3), - PINMUX_IPSR_DATA(IP5_28, AUDIO_CLKA), - PINMUX_IPSR_DATA(IP5_28, CAN_TXCLK), - PINMUX_IPSR_DATA(IP5_30_29, AUDIO_CLKB), - PINMUX_IPSR_DATA(IP5_30_29, USB_OVC2), - PINMUX_IPSR_DATA(IP5_30_29, CAN_DEBUGOUT0), - PINMUX_IPSR_DATA(IP5_30_29, MOUT0), - - PINMUX_IPSR_DATA(IP6_1_0, SSI_SCK0129), - PINMUX_IPSR_DATA(IP6_1_0, CAN_DEBUGOUT1), - PINMUX_IPSR_DATA(IP6_1_0, MOUT1), - PINMUX_IPSR_DATA(IP6_3_2, SSI_WS0129), - PINMUX_IPSR_DATA(IP6_3_2, CAN_DEBUGOUT2), - PINMUX_IPSR_DATA(IP6_3_2, MOUT2), - PINMUX_IPSR_DATA(IP6_5_4, SSI_SDATA0), - PINMUX_IPSR_DATA(IP6_5_4, CAN_DEBUGOUT3), - PINMUX_IPSR_DATA(IP6_5_4, MOUT5), - PINMUX_IPSR_DATA(IP6_7_6, SSI_SDATA1), - PINMUX_IPSR_DATA(IP6_7_6, CAN_DEBUGOUT4), - PINMUX_IPSR_DATA(IP6_7_6, MOUT6), - PINMUX_IPSR_DATA(IP6_8, SSI_SDATA2), - PINMUX_IPSR_DATA(IP6_8, CAN_DEBUGOUT5), - PINMUX_IPSR_DATA(IP6_11_9, SSI_SCK34), - PINMUX_IPSR_DATA(IP6_11_9, CAN_DEBUGOUT6), - PINMUX_IPSR_DATA(IP6_11_9, CAN0_TX_B), - PINMUX_IPSR_MODSEL_DATA(IP6_11_9, IERX, SEL_IE_0), - PINMUX_IPSR_MODSEL_DATA(IP6_11_9, SSI_SCK9_C, SEL_SSI9_2), - PINMUX_IPSR_DATA(IP6_14_12, SSI_WS34), - PINMUX_IPSR_DATA(IP6_14_12, CAN_DEBUGOUT7), - PINMUX_IPSR_MODSEL_DATA(IP6_14_12, CAN0_RX_B, SEL_CAN0_1), - PINMUX_IPSR_DATA(IP6_14_12, IETX), - PINMUX_IPSR_MODSEL_DATA(IP6_14_12, SSI_WS9_C, SEL_SSI9_2), - PINMUX_IPSR_DATA(IP6_17_15, SSI_SDATA3), - PINMUX_IPSR_DATA(IP6_17_15, PWM0_C), - PINMUX_IPSR_DATA(IP6_17_15, CAN_DEBUGOUT8), - PINMUX_IPSR_MODSEL_DATA(IP6_17_15, CAN_CLK_B, SEL_CANCLK_1), - PINMUX_IPSR_MODSEL_DATA(IP6_17_15, IECLK, SEL_IE_0), - PINMUX_IPSR_MODSEL_DATA(IP6_17_15, SCIF_CLK_B, SEL_SCIF_1), - PINMUX_IPSR_MODSEL_DATA(IP6_17_15, TCLK0_B, SEL_TMU0_1), - PINMUX_IPSR_DATA(IP6_19_18, SSI_SDATA4), - PINMUX_IPSR_DATA(IP6_19_18, CAN_DEBUGOUT9), - PINMUX_IPSR_MODSEL_DATA(IP6_19_18, SSI_SDATA9_C, SEL_SSI9_2), - PINMUX_IPSR_DATA(IP6_22_20, SSI_SCK5), - PINMUX_IPSR_DATA(IP6_22_20, ADICLK), - PINMUX_IPSR_DATA(IP6_22_20, CAN_DEBUGOUT10), - PINMUX_IPSR_MODSEL_DATA(IP6_22_20, SCK3, SEL_SCIF3_0), - PINMUX_IPSR_MODSEL_DATA(IP6_22_20, TCLK0_D, SEL_TMU0_3), - PINMUX_IPSR_DATA(IP6_24_23, SSI_WS5), - PINMUX_IPSR_MODSEL_DATA(IP6_24_23, ADICS_SAMP, SEL_ADI_0), - PINMUX_IPSR_DATA(IP6_24_23, CAN_DEBUGOUT11), - PINMUX_IPSR_DATA(IP6_24_23, TX3_IRDA_TX), - PINMUX_IPSR_DATA(IP6_26_25, SSI_SDATA5), - PINMUX_IPSR_MODSEL_DATA(IP6_26_25, ADIDATA, SEL_ADI_0), - PINMUX_IPSR_DATA(IP6_26_25, CAN_DEBUGOUT12), - PINMUX_IPSR_MODSEL_DATA(IP6_26_25, RX3_IRDA_RX, SEL_SCIF3_0), - PINMUX_IPSR_DATA(IP6_30_29, SSI_SCK6), - PINMUX_IPSR_DATA(IP6_30_29, ADICHS0), - PINMUX_IPSR_DATA(IP6_30_29, CAN0_TX), - PINMUX_IPSR_MODSEL_DATA(IP6_30_29, IERX_B, SEL_IE_1), - - PINMUX_IPSR_DATA(IP7_1_0, SSI_WS6), - PINMUX_IPSR_DATA(IP7_1_0, ADICHS1), - PINMUX_IPSR_MODSEL_DATA(IP7_1_0, CAN0_RX, SEL_CAN0_0), - PINMUX_IPSR_DATA(IP7_1_0, IETX_B), - PINMUX_IPSR_DATA(IP7_3_2, SSI_SDATA6), - PINMUX_IPSR_DATA(IP7_3_2, ADICHS2), - PINMUX_IPSR_MODSEL_DATA(IP7_3_2, CAN_CLK, SEL_CANCLK_0), - PINMUX_IPSR_MODSEL_DATA(IP7_3_2, IECLK_B, SEL_IE_1), - PINMUX_IPSR_MODSEL_DATA(IP7_6_4, SSI_SCK78, SEL_SSI7_0), - PINMUX_IPSR_DATA(IP7_6_4, CAN_DEBUGOUT13), - PINMUX_IPSR_MODSEL_DATA(IP7_6_4, IRQ0_B, SEL_INT0_1), - PINMUX_IPSR_MODSEL_DATA(IP7_6_4, SSI_SCK9_B, SEL_SSI9_1), - PINMUX_IPSR_MODSEL_DATA(IP7_6_4, HSPI_CLK1_C, SEL_HSPI1_2), - PINMUX_IPSR_MODSEL_DATA(IP7_9_7, SSI_WS78, SEL_SSI7_0), - PINMUX_IPSR_DATA(IP7_9_7, CAN_DEBUGOUT14), - PINMUX_IPSR_MODSEL_DATA(IP7_9_7, IRQ1_B, SEL_INT1_1), - PINMUX_IPSR_MODSEL_DATA(IP7_9_7, SSI_WS9_B, SEL_SSI9_1), - PINMUX_IPSR_MODSEL_DATA(IP7_9_7, HSPI_CS1_C, SEL_HSPI1_2), - PINMUX_IPSR_MODSEL_DATA(IP7_12_10, SSI_SDATA7, SEL_SSI7_0), - PINMUX_IPSR_DATA(IP7_12_10, CAN_DEBUGOUT15), - PINMUX_IPSR_MODSEL_DATA(IP7_12_10, IRQ2_B, SEL_INT2_1), - PINMUX_IPSR_MODSEL_DATA(IP7_12_10, TCLK1_C, SEL_TMU1_2), - PINMUX_IPSR_DATA(IP7_12_10, HSPI_TX1_C), - PINMUX_IPSR_MODSEL_DATA(IP7_14_13, SSI_SDATA8, SEL_SSI8_0), - PINMUX_IPSR_DATA(IP7_14_13, VSP), - PINMUX_IPSR_MODSEL_DATA(IP7_14_13, IRQ3_B, SEL_INT3_1), - PINMUX_IPSR_MODSEL_DATA(IP7_14_13, HSPI_RX1_C, SEL_HSPI1_2), - PINMUX_IPSR_DATA(IP7_16_15, SD0_CLK), - PINMUX_IPSR_DATA(IP7_16_15, ATACS01), - PINMUX_IPSR_MODSEL_DATA(IP7_16_15, SCK1_B, SEL_SCIF1_1), - PINMUX_IPSR_DATA(IP7_18_17, SD0_CMD), - PINMUX_IPSR_DATA(IP7_18_17, ATACS11), - PINMUX_IPSR_DATA(IP7_18_17, TX1_B), - PINMUX_IPSR_DATA(IP7_18_17, CC5_TDO), - PINMUX_IPSR_DATA(IP7_20_19, SD0_DAT0), - PINMUX_IPSR_DATA(IP7_20_19, ATADIR1), - PINMUX_IPSR_MODSEL_DATA(IP7_20_19, RX1_B, SEL_SCIF1_1), - PINMUX_IPSR_DATA(IP7_20_19, CC5_TRST), - PINMUX_IPSR_DATA(IP7_22_21, SD0_DAT1), - PINMUX_IPSR_DATA(IP7_22_21, ATAG1), - PINMUX_IPSR_MODSEL_DATA(IP7_22_21, SCK2_B, SEL_SCIF2_1), - PINMUX_IPSR_DATA(IP7_22_21, CC5_TMS), - PINMUX_IPSR_DATA(IP7_24_23, SD0_DAT2), - PINMUX_IPSR_DATA(IP7_24_23, ATARD1), - PINMUX_IPSR_DATA(IP7_24_23, TX2_B), - PINMUX_IPSR_DATA(IP7_24_23, CC5_TCK), - PINMUX_IPSR_DATA(IP7_26_25, SD0_DAT3), - PINMUX_IPSR_DATA(IP7_26_25, ATAWR1), - PINMUX_IPSR_MODSEL_DATA(IP7_26_25, RX2_B, SEL_SCIF2_1), - PINMUX_IPSR_DATA(IP7_26_25, CC5_TDI), - PINMUX_IPSR_DATA(IP7_28_27, SD0_CD), - PINMUX_IPSR_MODSEL_DATA(IP7_28_27, DREQ2, SEL_EXBUS2_0), - PINMUX_IPSR_MODSEL_DATA(IP7_28_27, RTS1_B_TANS_B, SEL_SCIF1_1), - PINMUX_IPSR_DATA(IP7_30_29, SD0_WP), - PINMUX_IPSR_DATA(IP7_30_29, DACK2), - PINMUX_IPSR_MODSEL_DATA(IP7_30_29, CTS1_B, SEL_SCIF1_1), - - PINMUX_IPSR_DATA(IP8_3_0, HSPI_CLK0), - PINMUX_IPSR_MODSEL_DATA(IP8_3_0, CTS0, SEL_SCIF0_0), - PINMUX_IPSR_DATA(IP8_3_0, USB_OVC0), - PINMUX_IPSR_DATA(IP8_3_0, AD_CLK), - PINMUX_IPSR_DATA(IP8_3_0, CC5_STATE4), - PINMUX_IPSR_DATA(IP8_3_0, CC5_STATE12), - PINMUX_IPSR_DATA(IP8_3_0, CC5_STATE20), - PINMUX_IPSR_DATA(IP8_3_0, CC5_STATE28), - PINMUX_IPSR_DATA(IP8_3_0, CC5_STATE36), - PINMUX_IPSR_DATA(IP8_7_4, HSPI_CS0), - PINMUX_IPSR_MODSEL_DATA(IP8_7_4, RTS0_TANS, SEL_SCIF0_0), - PINMUX_IPSR_DATA(IP8_7_4, USB_OVC1), - PINMUX_IPSR_DATA(IP8_7_4, AD_DI), - PINMUX_IPSR_DATA(IP8_7_4, CC5_STATE5), - PINMUX_IPSR_DATA(IP8_7_4, CC5_STATE13), - PINMUX_IPSR_DATA(IP8_7_4, CC5_STATE21), - PINMUX_IPSR_DATA(IP8_7_4, CC5_STATE29), - PINMUX_IPSR_DATA(IP8_7_4, CC5_STATE37), - PINMUX_IPSR_DATA(IP8_11_8, HSPI_TX0), - PINMUX_IPSR_DATA(IP8_11_8, TX0), - PINMUX_IPSR_DATA(IP8_11_8, CAN_DEBUG_HW_TRIGGER), - PINMUX_IPSR_DATA(IP8_11_8, AD_DO), - PINMUX_IPSR_DATA(IP8_11_8, CC5_STATE6), - PINMUX_IPSR_DATA(IP8_11_8, CC5_STATE14), - PINMUX_IPSR_DATA(IP8_11_8, CC5_STATE22), - PINMUX_IPSR_DATA(IP8_11_8, CC5_STATE30), - PINMUX_IPSR_DATA(IP8_11_8, CC5_STATE38), - PINMUX_IPSR_DATA(IP8_15_12, HSPI_RX0), - PINMUX_IPSR_MODSEL_DATA(IP8_15_12, RX0, SEL_SCIF0_0), - PINMUX_IPSR_DATA(IP8_15_12, CAN_STEP0), - PINMUX_IPSR_DATA(IP8_15_12, AD_NCS), - PINMUX_IPSR_DATA(IP8_15_12, CC5_STATE7), - PINMUX_IPSR_DATA(IP8_15_12, CC5_STATE15), - PINMUX_IPSR_DATA(IP8_15_12, CC5_STATE23), - PINMUX_IPSR_DATA(IP8_15_12, CC5_STATE31), - PINMUX_IPSR_DATA(IP8_15_12, CC5_STATE39), - PINMUX_IPSR_DATA(IP8_17_16, FMCLK), - PINMUX_IPSR_DATA(IP8_17_16, RDS_CLK), - PINMUX_IPSR_DATA(IP8_17_16, PCMOE), - PINMUX_IPSR_DATA(IP8_18, BPFCLK), - PINMUX_IPSR_DATA(IP8_18, PCMWE), - PINMUX_IPSR_DATA(IP8_19, FMIN), - PINMUX_IPSR_DATA(IP8_19, RDS_DATA), - PINMUX_IPSR_DATA(IP8_20, VI0_CLK), - PINMUX_IPSR_DATA(IP8_20, MMC1_CLK), - PINMUX_IPSR_DATA(IP8_22_21, VI0_CLKENB), - PINMUX_IPSR_DATA(IP8_22_21, TX1_C), - PINMUX_IPSR_DATA(IP8_22_21, HTX1_B), - PINMUX_IPSR_DATA(IP8_22_21, MT1_SYNC), - PINMUX_IPSR_DATA(IP8_24_23, VI0_FIELD), - PINMUX_IPSR_MODSEL_DATA(IP8_24_23, RX1_C, SEL_SCIF1_2), - PINMUX_IPSR_MODSEL_DATA(IP8_24_23, HRX1_B, SEL_HSCIF1_1), - PINMUX_IPSR_DATA(IP8_27_25, VI0_HSYNC), - PINMUX_IPSR_MODSEL_DATA(IP8_27_25, VI0_DATA0_B_VI0_B0_B, SEL_VI0_1), - PINMUX_IPSR_MODSEL_DATA(IP8_27_25, CTS1_C, SEL_SCIF1_2), - PINMUX_IPSR_DATA(IP8_27_25, TX4_D), - PINMUX_IPSR_DATA(IP8_27_25, MMC1_CMD), - PINMUX_IPSR_MODSEL_DATA(IP8_27_25, HSCK1_B, SEL_HSCIF1_1), - PINMUX_IPSR_DATA(IP8_30_28, VI0_VSYNC), - PINMUX_IPSR_MODSEL_DATA(IP8_30_28, VI0_DATA1_B_VI0_B1_B, SEL_VI0_1), - PINMUX_IPSR_MODSEL_DATA(IP8_30_28, RTS1_C_TANS_C, SEL_SCIF1_2), - PINMUX_IPSR_MODSEL_DATA(IP8_30_28, RX4_D, SEL_SCIF4_3), - PINMUX_IPSR_MODSEL_DATA(IP8_30_28, PWMFSW0_C, SEL_PWMFSW_2), - - PINMUX_IPSR_MODSEL_DATA(IP9_1_0, VI0_DATA0_VI0_B0, SEL_VI0_0), - PINMUX_IPSR_MODSEL_DATA(IP9_1_0, HRTS1_B, SEL_HSCIF1_1), - PINMUX_IPSR_DATA(IP9_1_0, MT1_VCXO), - PINMUX_IPSR_MODSEL_DATA(IP9_3_2, VI0_DATA1_VI0_B1, SEL_VI0_0), - PINMUX_IPSR_MODSEL_DATA(IP9_3_2, HCTS1_B, SEL_HSCIF1_1), - PINMUX_IPSR_DATA(IP9_3_2, MT1_PWM), - PINMUX_IPSR_DATA(IP9_4, VI0_DATA2_VI0_B2), - PINMUX_IPSR_DATA(IP9_4, MMC1_D0), - PINMUX_IPSR_DATA(IP9_5, VI0_DATA3_VI0_B3), - PINMUX_IPSR_DATA(IP9_5, MMC1_D1), - PINMUX_IPSR_DATA(IP9_6, VI0_DATA4_VI0_B4), - PINMUX_IPSR_DATA(IP9_6, MMC1_D2), - PINMUX_IPSR_DATA(IP9_7, VI0_DATA5_VI0_B5), - PINMUX_IPSR_DATA(IP9_7, MMC1_D3), - PINMUX_IPSR_DATA(IP9_9_8, VI0_DATA6_VI0_B6), - PINMUX_IPSR_DATA(IP9_9_8, MMC1_D4), - PINMUX_IPSR_DATA(IP9_9_8, ARM_TRACEDATA_0), - PINMUX_IPSR_DATA(IP9_11_10, VI0_DATA7_VI0_B7), - PINMUX_IPSR_DATA(IP9_11_10, MMC1_D5), - PINMUX_IPSR_DATA(IP9_11_10, ARM_TRACEDATA_1), - PINMUX_IPSR_DATA(IP9_13_12, VI0_G0), - PINMUX_IPSR_MODSEL_DATA(IP9_13_12, SSI_SCK78_C, SEL_SSI7_2), - PINMUX_IPSR_MODSEL_DATA(IP9_13_12, IRQ0, SEL_INT0_0), - PINMUX_IPSR_DATA(IP9_13_12, ARM_TRACEDATA_2), - PINMUX_IPSR_DATA(IP9_15_14, VI0_G1), - PINMUX_IPSR_MODSEL_DATA(IP9_15_14, SSI_WS78_C, SEL_SSI7_2), - PINMUX_IPSR_MODSEL_DATA(IP9_15_14, IRQ1, SEL_INT1_0), - PINMUX_IPSR_DATA(IP9_15_14, ARM_TRACEDATA_3), - PINMUX_IPSR_DATA(IP9_18_16, VI0_G2), - PINMUX_IPSR_DATA(IP9_18_16, ETH_TXD1), - PINMUX_IPSR_DATA(IP9_18_16, MMC1_D6), - PINMUX_IPSR_DATA(IP9_18_16, ARM_TRACEDATA_4), - PINMUX_IPSR_DATA(IP9_18_16, TS_SPSYNC0), - PINMUX_IPSR_DATA(IP9_21_19, VI0_G3), - PINMUX_IPSR_DATA(IP9_21_19, ETH_CRS_DV), - PINMUX_IPSR_DATA(IP9_21_19, MMC1_D7), - PINMUX_IPSR_DATA(IP9_21_19, ARM_TRACEDATA_5), - PINMUX_IPSR_DATA(IP9_21_19, TS_SDAT0), - PINMUX_IPSR_DATA(IP9_23_22, VI0_G4), - PINMUX_IPSR_DATA(IP9_23_22, ETH_TX_EN), - PINMUX_IPSR_MODSEL_DATA(IP9_23_22, SD2_DAT0_B, SEL_SD2_1), - PINMUX_IPSR_DATA(IP9_23_22, ARM_TRACEDATA_6), - PINMUX_IPSR_DATA(IP9_25_24, VI0_G5), - PINMUX_IPSR_DATA(IP9_25_24, ETH_RX_ER), - PINMUX_IPSR_MODSEL_DATA(IP9_25_24, SD2_DAT1_B, SEL_SD2_1), - PINMUX_IPSR_DATA(IP9_25_24, ARM_TRACEDATA_7), - PINMUX_IPSR_DATA(IP9_27_26, VI0_G6), - PINMUX_IPSR_DATA(IP9_27_26, ETH_RXD0), - PINMUX_IPSR_MODSEL_DATA(IP9_27_26, SD2_DAT2_B, SEL_SD2_1), - PINMUX_IPSR_DATA(IP9_27_26, ARM_TRACEDATA_8), - PINMUX_IPSR_DATA(IP9_29_28, VI0_G7), - PINMUX_IPSR_DATA(IP9_29_28, ETH_RXD1), - PINMUX_IPSR_MODSEL_DATA(IP9_29_28, SD2_DAT3_B, SEL_SD2_1), - PINMUX_IPSR_DATA(IP9_29_28, ARM_TRACEDATA_9), - - PINMUX_IPSR_DATA(IP10_2_0, VI0_R0), - PINMUX_IPSR_MODSEL_DATA(IP10_2_0, SSI_SDATA7_C, SEL_SSI7_2), - PINMUX_IPSR_MODSEL_DATA(IP10_2_0, SCK1_C, SEL_SCIF1_2), - PINMUX_IPSR_MODSEL_DATA(IP10_2_0, DREQ1_B, SEL_EXBUS1_0), - PINMUX_IPSR_DATA(IP10_2_0, ARM_TRACEDATA_10), - PINMUX_IPSR_MODSEL_DATA(IP10_2_0, DREQ0_C, SEL_EXBUS0_2), - PINMUX_IPSR_DATA(IP10_5_3, VI0_R1), - PINMUX_IPSR_MODSEL_DATA(IP10_5_3, SSI_SDATA8_C, SEL_SSI8_2), - PINMUX_IPSR_DATA(IP10_5_3, DACK1_B), - PINMUX_IPSR_DATA(IP10_5_3, ARM_TRACEDATA_11), - PINMUX_IPSR_DATA(IP10_5_3, DACK0_C), - PINMUX_IPSR_DATA(IP10_5_3, DRACK0_C), - PINMUX_IPSR_DATA(IP10_8_6, VI0_R2), - PINMUX_IPSR_DATA(IP10_8_6, ETH_LINK), - PINMUX_IPSR_DATA(IP10_8_6, SD2_CLK_B), - PINMUX_IPSR_MODSEL_DATA(IP10_8_6, IRQ2, SEL_INT2_0), - PINMUX_IPSR_DATA(IP10_8_6, ARM_TRACEDATA_12), - PINMUX_IPSR_DATA(IP10_11_9, VI0_R3), - PINMUX_IPSR_DATA(IP10_11_9, ETH_MAGIC), - PINMUX_IPSR_MODSEL_DATA(IP10_11_9, SD2_CMD_B, SEL_SD2_1), - PINMUX_IPSR_MODSEL_DATA(IP10_11_9, IRQ3, SEL_INT3_0), - PINMUX_IPSR_DATA(IP10_11_9, ARM_TRACEDATA_13), - PINMUX_IPSR_DATA(IP10_14_12, VI0_R4), - PINMUX_IPSR_DATA(IP10_14_12, ETH_REFCLK), - PINMUX_IPSR_MODSEL_DATA(IP10_14_12, SD2_CD_B, SEL_SD2_1), - PINMUX_IPSR_MODSEL_DATA(IP10_14_12, HSPI_CLK1_B, SEL_HSPI1_1), - PINMUX_IPSR_DATA(IP10_14_12, ARM_TRACEDATA_14), - PINMUX_IPSR_DATA(IP10_14_12, MT1_CLK), - PINMUX_IPSR_DATA(IP10_14_12, TS_SCK0), - PINMUX_IPSR_DATA(IP10_17_15, VI0_R5), - PINMUX_IPSR_DATA(IP10_17_15, ETH_TXD0), - PINMUX_IPSR_MODSEL_DATA(IP10_17_15, SD2_WP_B, SEL_SD2_1), - PINMUX_IPSR_MODSEL_DATA(IP10_17_15, HSPI_CS1_B, SEL_HSPI1_1), - PINMUX_IPSR_DATA(IP10_17_15, ARM_TRACEDATA_15), - PINMUX_IPSR_DATA(IP10_17_15, MT1_D), - PINMUX_IPSR_DATA(IP10_17_15, TS_SDEN0), - PINMUX_IPSR_DATA(IP10_20_18, VI0_R6), - PINMUX_IPSR_DATA(IP10_20_18, ETH_MDC), - PINMUX_IPSR_MODSEL_DATA(IP10_20_18, DREQ2_C, SEL_EXBUS2_2), - PINMUX_IPSR_DATA(IP10_20_18, HSPI_TX1_B), - PINMUX_IPSR_DATA(IP10_20_18, TRACECLK), - PINMUX_IPSR_DATA(IP10_20_18, MT1_BEN), - PINMUX_IPSR_MODSEL_DATA(IP10_20_18, PWMFSW0_D, SEL_PWMFSW_3), - PINMUX_IPSR_DATA(IP10_23_21, VI0_R7), - PINMUX_IPSR_DATA(IP10_23_21, ETH_MDIO), - PINMUX_IPSR_DATA(IP10_23_21, DACK2_C), - PINMUX_IPSR_MODSEL_DATA(IP10_23_21, HSPI_RX1_B, SEL_HSPI1_1), - PINMUX_IPSR_MODSEL_DATA(IP10_23_21, SCIF_CLK_D, SEL_SCIF_3), - PINMUX_IPSR_DATA(IP10_23_21, TRACECTL), - PINMUX_IPSR_DATA(IP10_23_21, MT1_PEN), - PINMUX_IPSR_DATA(IP10_25_24, VI1_CLK), - PINMUX_IPSR_MODSEL_DATA(IP10_25_24, SIM_D, SEL_SIM_0), - PINMUX_IPSR_MODSEL_DATA(IP10_25_24, SDA3, SEL_I2C3_0), - PINMUX_IPSR_DATA(IP10_28_26, VI1_HSYNC), - PINMUX_IPSR_DATA(IP10_28_26, VI3_CLK), - PINMUX_IPSR_DATA(IP10_28_26, SSI_SCK4), - PINMUX_IPSR_MODSEL_DATA(IP10_28_26, GPS_SIGN_C, SEL_GPS_2), - PINMUX_IPSR_MODSEL_DATA(IP10_28_26, PWMFSW0_E, SEL_PWMFSW_4), - PINMUX_IPSR_DATA(IP10_31_29, VI1_VSYNC), - PINMUX_IPSR_DATA(IP10_31_29, AUDIO_CLKOUT_C), - PINMUX_IPSR_DATA(IP10_31_29, SSI_WS4), - PINMUX_IPSR_DATA(IP10_31_29, SIM_CLK), - PINMUX_IPSR_MODSEL_DATA(IP10_31_29, GPS_MAG_C, SEL_GPS_2), - PINMUX_IPSR_DATA(IP10_31_29, SPV_TRST), - PINMUX_IPSR_MODSEL_DATA(IP10_31_29, SCL3, SEL_I2C3_0), - - PINMUX_IPSR_DATA(IP11_2_0, VI1_DATA0_VI1_B0), - PINMUX_IPSR_MODSEL_DATA(IP11_2_0, SD2_DAT0, SEL_SD2_0), - PINMUX_IPSR_DATA(IP11_2_0, SIM_RST), - PINMUX_IPSR_DATA(IP11_2_0, SPV_TCK), - PINMUX_IPSR_DATA(IP11_2_0, ADICLK_B), - PINMUX_IPSR_DATA(IP11_5_3, VI1_DATA1_VI1_B1), - PINMUX_IPSR_MODSEL_DATA(IP11_5_3, SD2_DAT1, SEL_SD2_0), - PINMUX_IPSR_DATA(IP11_5_3, MT0_CLK), - PINMUX_IPSR_DATA(IP11_5_3, SPV_TMS), - PINMUX_IPSR_MODSEL_DATA(IP11_5_3, ADICS_B_SAMP_B, SEL_ADI_1), - PINMUX_IPSR_DATA(IP11_8_6, VI1_DATA2_VI1_B2), - PINMUX_IPSR_MODSEL_DATA(IP11_8_6, SD2_DAT2, SEL_SD2_0), - PINMUX_IPSR_DATA(IP11_8_6, MT0_D), - PINMUX_IPSR_DATA(IP11_8_6, SPVTDI), - PINMUX_IPSR_MODSEL_DATA(IP11_8_6, ADIDATA_B, SEL_ADI_1), - PINMUX_IPSR_DATA(IP11_11_9, VI1_DATA3_VI1_B3), - PINMUX_IPSR_MODSEL_DATA(IP11_11_9, SD2_DAT3, SEL_SD2_0), - PINMUX_IPSR_DATA(IP11_11_9, MT0_BEN), - PINMUX_IPSR_DATA(IP11_11_9, SPV_TDO), - PINMUX_IPSR_DATA(IP11_11_9, ADICHS0_B), - PINMUX_IPSR_DATA(IP11_14_12, VI1_DATA4_VI1_B4), - PINMUX_IPSR_DATA(IP11_14_12, SD2_CLK), - PINMUX_IPSR_DATA(IP11_14_12, MT0_PEN), - PINMUX_IPSR_DATA(IP11_14_12, SPA_TRST), - PINMUX_IPSR_MODSEL_DATA(IP11_14_12, HSPI_CLK1_D, SEL_HSPI1_3), - PINMUX_IPSR_DATA(IP11_14_12, ADICHS1_B), - PINMUX_IPSR_DATA(IP11_17_15, VI1_DATA5_VI1_B5), - PINMUX_IPSR_MODSEL_DATA(IP11_17_15, SD2_CMD, SEL_SD2_0), - PINMUX_IPSR_DATA(IP11_17_15, MT0_SYNC), - PINMUX_IPSR_DATA(IP11_17_15, SPA_TCK), - PINMUX_IPSR_MODSEL_DATA(IP11_17_15, HSPI_CS1_D, SEL_HSPI1_3), - PINMUX_IPSR_DATA(IP11_17_15, ADICHS2_B), - PINMUX_IPSR_DATA(IP11_20_18, VI1_DATA6_VI1_B6), - PINMUX_IPSR_MODSEL_DATA(IP11_20_18, SD2_CD, SEL_SD2_0), - PINMUX_IPSR_DATA(IP11_20_18, MT0_VCXO), - PINMUX_IPSR_DATA(IP11_20_18, SPA_TMS), - PINMUX_IPSR_DATA(IP11_20_18, HSPI_TX1_D), - PINMUX_IPSR_DATA(IP11_23_21, VI1_DATA7_VI1_B7), - PINMUX_IPSR_MODSEL_DATA(IP11_23_21, SD2_WP, SEL_SD2_0), - PINMUX_IPSR_DATA(IP11_23_21, MT0_PWM), - PINMUX_IPSR_DATA(IP11_23_21, SPA_TDI), - PINMUX_IPSR_MODSEL_DATA(IP11_23_21, HSPI_RX1_D, SEL_HSPI1_3), - PINMUX_IPSR_DATA(IP11_26_24, VI1_G0), - PINMUX_IPSR_DATA(IP11_26_24, VI3_DATA0), - PINMUX_IPSR_DATA(IP11_26_24, DU1_DOTCLKOUT1), - PINMUX_IPSR_DATA(IP11_26_24, TS_SCK1), - PINMUX_IPSR_MODSEL_DATA(IP11_26_24, DREQ2_B, SEL_EXBUS2_1), - PINMUX_IPSR_DATA(IP11_26_24, TX2), - PINMUX_IPSR_DATA(IP11_26_24, SPA_TDO), - PINMUX_IPSR_MODSEL_DATA(IP11_26_24, HCTS0_B, SEL_HSCIF0_1), - PINMUX_IPSR_DATA(IP11_29_27, VI1_G1), - PINMUX_IPSR_DATA(IP11_29_27, VI3_DATA1), - PINMUX_IPSR_DATA(IP11_29_27, SSI_SCK1), - PINMUX_IPSR_DATA(IP11_29_27, TS_SDEN1), - PINMUX_IPSR_DATA(IP11_29_27, DACK2_B), - PINMUX_IPSR_MODSEL_DATA(IP11_29_27, RX2, SEL_SCIF2_0), - PINMUX_IPSR_MODSEL_DATA(IP11_29_27, HRTS0_B, SEL_HSCIF0_1), - - PINMUX_IPSR_DATA(IP12_2_0, VI1_G2), - PINMUX_IPSR_DATA(IP12_2_0, VI3_DATA2), - PINMUX_IPSR_DATA(IP12_2_0, SSI_WS1), - PINMUX_IPSR_DATA(IP12_2_0, TS_SPSYNC1), - PINMUX_IPSR_MODSEL_DATA(IP12_2_0, SCK2, SEL_SCIF2_0), - PINMUX_IPSR_MODSEL_DATA(IP12_2_0, HSCK0_B, SEL_HSCIF0_1), - PINMUX_IPSR_DATA(IP12_5_3, VI1_G3), - PINMUX_IPSR_DATA(IP12_5_3, VI3_DATA3), - PINMUX_IPSR_DATA(IP12_5_3, SSI_SCK2), - PINMUX_IPSR_DATA(IP12_5_3, TS_SDAT1), - PINMUX_IPSR_MODSEL_DATA(IP12_5_3, SCL1_C, SEL_I2C1_2), - PINMUX_IPSR_DATA(IP12_5_3, HTX0_B), - PINMUX_IPSR_DATA(IP12_8_6, VI1_G4), - PINMUX_IPSR_DATA(IP12_8_6, VI3_DATA4), - PINMUX_IPSR_DATA(IP12_8_6, SSI_WS2), - PINMUX_IPSR_MODSEL_DATA(IP12_8_6, SDA1_C, SEL_I2C1_2), - PINMUX_IPSR_DATA(IP12_8_6, SIM_RST_B), - PINMUX_IPSR_MODSEL_DATA(IP12_8_6, HRX0_B, SEL_HSCIF0_1), - PINMUX_IPSR_DATA(IP12_11_9, VI1_G5), - PINMUX_IPSR_DATA(IP12_11_9, VI3_DATA5), - PINMUX_IPSR_MODSEL_DATA(IP12_11_9, GPS_CLK, SEL_GPS_0), - PINMUX_IPSR_DATA(IP12_11_9, FSE), - PINMUX_IPSR_DATA(IP12_11_9, TX4_B), - PINMUX_IPSR_MODSEL_DATA(IP12_11_9, SIM_D_B, SEL_SIM_1), - PINMUX_IPSR_DATA(IP12_14_12, VI1_G6), - PINMUX_IPSR_DATA(IP12_14_12, VI3_DATA6), - PINMUX_IPSR_MODSEL_DATA(IP12_14_12, GPS_SIGN, SEL_GPS_0), - PINMUX_IPSR_DATA(IP12_14_12, FRB), - PINMUX_IPSR_MODSEL_DATA(IP12_14_12, RX4_B, SEL_SCIF4_1), - PINMUX_IPSR_DATA(IP12_14_12, SIM_CLK_B), - PINMUX_IPSR_DATA(IP12_17_15, VI1_G7), - PINMUX_IPSR_DATA(IP12_17_15, VI3_DATA7), - PINMUX_IPSR_MODSEL_DATA(IP12_17_15, GPS_MAG, SEL_GPS_0), - PINMUX_IPSR_DATA(IP12_17_15, FCE), - PINMUX_IPSR_MODSEL_DATA(IP12_17_15, SCK4_B, SEL_SCIF4_1), -}; - -static struct pinmux_gpio pinmux_gpios[] = { - PINMUX_GPIO_GP_ALL(), - GPIO_FN(AVS1), GPIO_FN(AVS2), GPIO_FN(A17), GPIO_FN(A18), - GPIO_FN(A19), - - /* IPSR0 */ - GPIO_FN(USB_PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0), - GPIO_FN(SCIF_CLK), GPIO_FN(TCLK0_C), GPIO_FN(BS), GPIO_FN(SD1_DAT2), - GPIO_FN(MMC0_D2), GPIO_FN(FD2), GPIO_FN(ATADIR0), GPIO_FN(SDSELF), - GPIO_FN(HCTS1), GPIO_FN(TX4_C), GPIO_FN(A0), GPIO_FN(SD1_DAT3), - GPIO_FN(MMC0_D3), GPIO_FN(FD3), GPIO_FN(A20), GPIO_FN(TX5_D), - GPIO_FN(HSPI_TX2_B), GPIO_FN(A21), GPIO_FN(SCK5_D), - GPIO_FN(HSPI_CLK2_B), GPIO_FN(A22), GPIO_FN(RX5_D), - GPIO_FN(HSPI_RX2_B), GPIO_FN(VI1_R0), GPIO_FN(A23), GPIO_FN(FCLE), - GPIO_FN(HSPI_CLK2), GPIO_FN(VI1_R1), GPIO_FN(A24), GPIO_FN(SD1_CD), - GPIO_FN(MMC0_D4), GPIO_FN(FD4), GPIO_FN(HSPI_CS2), GPIO_FN(VI1_R2), - GPIO_FN(SSI_WS78_B), GPIO_FN(A25), GPIO_FN(SD1_WP), GPIO_FN(MMC0_D5), - GPIO_FN(FD5), GPIO_FN(HSPI_RX2), GPIO_FN(VI1_R3), GPIO_FN(TX5_B), - GPIO_FN(SSI_SDATA7_B), GPIO_FN(CTS0_B), GPIO_FN(CLKOUT), - GPIO_FN(TX3C_IRDA_TX_C), GPIO_FN(PWM0_B), GPIO_FN(CS0), - GPIO_FN(HSPI_CS2_B), GPIO_FN(CS1_A26), GPIO_FN(HSPI_TX2), - GPIO_FN(SDSELF_B), GPIO_FN(RD_WR), GPIO_FN(FWE), GPIO_FN(ATAG0), - GPIO_FN(VI1_R7), GPIO_FN(HRTS1), GPIO_FN(RX4_C), - - /* IPSR1 */ - GPIO_FN(EX_CS0), GPIO_FN(RX3_C_IRDA_RX_C), GPIO_FN(MMC0_D6), - GPIO_FN(FD6), GPIO_FN(EX_CS1), GPIO_FN(MMC0_D7), GPIO_FN(FD7), - GPIO_FN(EX_CS2), GPIO_FN(SD1_CLK), GPIO_FN(MMC0_CLK), GPIO_FN(FALE), - GPIO_FN(ATACS00), GPIO_FN(EX_CS3), GPIO_FN(SD1_CMD), GPIO_FN(MMC0_CMD), - GPIO_FN(FRE), GPIO_FN(ATACS10), GPIO_FN(VI1_R4), GPIO_FN(RX5_B), - GPIO_FN(HSCK1), GPIO_FN(SSI_SDATA8_B), GPIO_FN(RTS0_B_TANS_B), - GPIO_FN(SSI_SDATA9), GPIO_FN(EX_CS4), GPIO_FN(SD1_DAT0), - GPIO_FN(MMC0_D0), GPIO_FN(FD0), GPIO_FN(ATARD0), GPIO_FN(VI1_R5), - GPIO_FN(SCK5_B), GPIO_FN(HTX1), GPIO_FN(TX2_E), GPIO_FN(TX0_B), - GPIO_FN(SSI_SCK9), GPIO_FN(EX_CS5), GPIO_FN(SD1_DAT1), - GPIO_FN(MMC0_D1), GPIO_FN(FD1), GPIO_FN(ATAWR0), GPIO_FN(VI1_R6), - GPIO_FN(HRX1), GPIO_FN(RX2_E), GPIO_FN(RX0_B), GPIO_FN(SSI_WS9), - GPIO_FN(MLB_CLK), GPIO_FN(PWM2), GPIO_FN(SCK4), GPIO_FN(MLB_SIG), - GPIO_FN(PWM3), GPIO_FN(TX4), GPIO_FN(MLB_DAT), GPIO_FN(PWM4), - GPIO_FN(RX4), GPIO_FN(HTX0), GPIO_FN(TX1), GPIO_FN(SDATA), - GPIO_FN(CTS0_C), GPIO_FN(SUB_TCK), GPIO_FN(CC5_STATE2), - GPIO_FN(CC5_STATE10), GPIO_FN(CC5_STATE18), GPIO_FN(CC5_STATE26), - GPIO_FN(CC5_STATE34), - - /* IPSR2 */ - GPIO_FN(HRX0), GPIO_FN(RX1), GPIO_FN(SCKZ), GPIO_FN(RTS0_C_TANS_C), - GPIO_FN(SUB_TDI), GPIO_FN(CC5_STATE3), GPIO_FN(CC5_STATE11), - GPIO_FN(CC5_STATE19), GPIO_FN(CC5_STATE27), GPIO_FN(CC5_STATE35), - GPIO_FN(HSCK0), GPIO_FN(SCK1), GPIO_FN(MTS), GPIO_FN(PWM5), - GPIO_FN(SCK0_C), GPIO_FN(SSI_SDATA9_B), GPIO_FN(SUB_TDO), - GPIO_FN(CC5_STATE0), GPIO_FN(CC5_STATE8), GPIO_FN(CC5_STATE16), - GPIO_FN(CC5_STATE24), GPIO_FN(CC5_STATE32), GPIO_FN(HCTS0), - GPIO_FN(CTS1), GPIO_FN(STM), GPIO_FN(PWM0_D), GPIO_FN(RX0_C), - GPIO_FN(SCIF_CLK_C), GPIO_FN(SUB_TRST), GPIO_FN(TCLK1_B), - GPIO_FN(CC5_OSCOUT), GPIO_FN(HRTS0), GPIO_FN(RTS1_TANS), - GPIO_FN(MDATA), GPIO_FN(TX0_C), GPIO_FN(SUB_TMS), GPIO_FN(CC5_STATE1), - GPIO_FN(CC5_STATE9), GPIO_FN(CC5_STATE17), GPIO_FN(CC5_STATE25), - GPIO_FN(CC5_STATE33), GPIO_FN(DU0_DR0), GPIO_FN(LCDOUT0), - GPIO_FN(DREQ0), GPIO_FN(GPS_CLK_B), GPIO_FN(AUDATA0), - GPIO_FN(TX5_C), GPIO_FN(DU0_DR1), GPIO_FN(LCDOUT1), GPIO_FN(DACK0), - GPIO_FN(DRACK0), GPIO_FN(GPS_SIGN_B), GPIO_FN(AUDATA1), GPIO_FN(RX5_C), - GPIO_FN(DU0_DR2), GPIO_FN(LCDOUT2), GPIO_FN(DU0_DR3), GPIO_FN(LCDOUT3), - GPIO_FN(DU0_DR4), GPIO_FN(LCDOUT4), GPIO_FN(DU0_DR5), GPIO_FN(LCDOUT5), - GPIO_FN(DU0_DR6), GPIO_FN(LCDOUT6), GPIO_FN(DU0_DR7), GPIO_FN(LCDOUT7), - GPIO_FN(DU0_DG0), GPIO_FN(LCDOUT8), GPIO_FN(DREQ1), GPIO_FN(SCL2), - GPIO_FN(AUDATA2), - - /* IPSR3 */ - GPIO_FN(DU0_DG1), GPIO_FN(LCDOUT9), GPIO_FN(DACK1), GPIO_FN(SDA2), - GPIO_FN(AUDATA3), GPIO_FN(DU0_DG2), GPIO_FN(LCDOUT10), - GPIO_FN(DU0_DG3), GPIO_FN(LCDOUT11), GPIO_FN(DU0_DG4), - GPIO_FN(LCDOUT12), GPIO_FN(DU0_DG5), GPIO_FN(LCDOUT13), - GPIO_FN(DU0_DG6), GPIO_FN(LCDOUT14), GPIO_FN(DU0_DG7), - GPIO_FN(LCDOUT15), GPIO_FN(DU0_DB0), GPIO_FN(LCDOUT16), - GPIO_FN(EX_WAIT1), GPIO_FN(SCL1), GPIO_FN(TCLK1), GPIO_FN(AUDATA4), - GPIO_FN(DU0_DB1), GPIO_FN(LCDOUT17), GPIO_FN(EX_WAIT2), GPIO_FN(SDA1), - GPIO_FN(GPS_MAG_B), GPIO_FN(AUDATA5), GPIO_FN(SCK5_C), - GPIO_FN(DU0_DB2), GPIO_FN(LCDOUT18), GPIO_FN(DU0_DB3), - GPIO_FN(LCDOUT19), GPIO_FN(DU0_DB4), GPIO_FN(LCDOUT20), - GPIO_FN(DU0_DB5), GPIO_FN(LCDOUT21), GPIO_FN(DU0_DB6), - GPIO_FN(LCDOUT22), GPIO_FN(DU0_DB7), GPIO_FN(LCDOUT23), - GPIO_FN(DU0_DOTCLKIN), GPIO_FN(QSTVA_QVS), GPIO_FN(TX3_D_IRDA_TX_D), - GPIO_FN(SCL3_B), GPIO_FN(DU0_DOTCLKOUT0), GPIO_FN(QCLK), - GPIO_FN(DU0_DOTCLKOUT1), GPIO_FN(QSTVB_QVE), GPIO_FN(RX3_D_IRDA_RX_D), - GPIO_FN(SDA3_B), GPIO_FN(SDA2_C), GPIO_FN(DACK0_B), GPIO_FN(DRACK0_B), - GPIO_FN(DU0_EXHSYNC_DU0_HSYNC), GPIO_FN(QSTH_QHS), - GPIO_FN(DU0_EXVSYNC_DU0_VSYNC), GPIO_FN(QSTB_QHE), - GPIO_FN(DU0_EXODDF_DU0_ODDF_DISP_CDE), GPIO_FN(QCPV_QDE), - GPIO_FN(CAN1_TX), GPIO_FN(TX2_C), GPIO_FN(SCL2_C), GPIO_FN(REMOCON), - - /* IPSR4 */ - GPIO_FN(DU0_DISP), GPIO_FN(QPOLA), GPIO_FN(CAN_CLK_C), GPIO_FN(SCK2_C), - GPIO_FN(DU0_CDE), GPIO_FN(QPOLB), GPIO_FN(CAN1_RX), GPIO_FN(RX2_C), - GPIO_FN(DREQ0_B), GPIO_FN(SSI_SCK78_B), GPIO_FN(SCK0_B), - GPIO_FN(DU1_DR0), GPIO_FN(VI2_DATA0_VI2_B0), GPIO_FN(PWM6), - GPIO_FN(SD3_CLK), GPIO_FN(TX3_E_IRDA_TX_E), GPIO_FN(AUDCK), - GPIO_FN(PWMFSW0_B), GPIO_FN(DU1_DR1), GPIO_FN(VI2_DATA1_VI2_B1), - GPIO_FN(PWM0), GPIO_FN(SD3_CMD), GPIO_FN(RX3_E_IRDA_RX_E), - GPIO_FN(AUDSYNC), GPIO_FN(CTS0_D), GPIO_FN(DU1_DR2), GPIO_FN(VI2_G0), - GPIO_FN(DU1_DR3), GPIO_FN(VI2_G1), GPIO_FN(DU1_DR4), GPIO_FN(VI2_G2), - GPIO_FN(DU1_DR5), GPIO_FN(VI2_G3), GPIO_FN(DU1_DR6), GPIO_FN(VI2_G4), - GPIO_FN(DU1_DR7), GPIO_FN(VI2_G5), GPIO_FN(DU1_DG0), - GPIO_FN(VI2_DATA2_VI2_B2), GPIO_FN(SCL1_B), GPIO_FN(SD3_DAT2), - GPIO_FN(SCK3_E), GPIO_FN(AUDATA6), GPIO_FN(TX0_D), GPIO_FN(DU1_DG1), - GPIO_FN(VI2_DATA3_VI2_B3), GPIO_FN(SDA1_B), GPIO_FN(SD3_DAT3), - GPIO_FN(SCK5), GPIO_FN(AUDATA7), GPIO_FN(RX0_D), GPIO_FN(DU1_DG2), - GPIO_FN(VI2_G6), GPIO_FN(DU1_DG3), GPIO_FN(VI2_G7), GPIO_FN(DU1_DG4), - GPIO_FN(VI2_R0), GPIO_FN(DU1_DG5), GPIO_FN(VI2_R1), GPIO_FN(DU1_DG6), - GPIO_FN(VI2_R2), GPIO_FN(DU1_DG7), GPIO_FN(VI2_R3), GPIO_FN(DU1_DB0), - GPIO_FN(VI2_DATA4_VI2_B4), GPIO_FN(SCL2_B), GPIO_FN(SD3_DAT0), - GPIO_FN(TX5), GPIO_FN(SCK0_D), - - /* IPSR5 */ - GPIO_FN(DU1_DB1), GPIO_FN(VI2_DATA5_VI2_B5), GPIO_FN(SDA2_B), - GPIO_FN(SD3_DAT1), GPIO_FN(RX5), GPIO_FN(RTS0_D_TANS_D), - GPIO_FN(DU1_DB2), GPIO_FN(VI2_R4), GPIO_FN(DU1_DB3), GPIO_FN(VI2_R5), - GPIO_FN(DU1_DB4), GPIO_FN(VI2_R6), GPIO_FN(DU1_DB5), GPIO_FN(VI2_R7), - GPIO_FN(DU1_DB6), GPIO_FN(SCL2_D), GPIO_FN(DU1_DB7), GPIO_FN(SDA2_D), - GPIO_FN(DU1_DOTCLKIN), GPIO_FN(VI2_CLKENB), GPIO_FN(HSPI_CS1), - GPIO_FN(SCL1_D), GPIO_FN(DU1_DOTCLKOUT), GPIO_FN(VI2_FIELD), - GPIO_FN(SDA1_D), GPIO_FN(DU1_EXHSYNC_DU1_HSYNC), GPIO_FN(VI2_HSYNC), - GPIO_FN(VI3_HSYNC), GPIO_FN(DU1_EXVSYNC_DU1_VSYNC), GPIO_FN(VI2_VSYNC), - GPIO_FN(VI3_VSYNC), GPIO_FN(DU1_EXODDF_DU1_ODDF_DISP_CDE), - GPIO_FN(VI2_CLK), GPIO_FN(TX3_B_IRDA_TX_B), GPIO_FN(SD3_CD), - GPIO_FN(HSPI_TX1), GPIO_FN(VI1_CLKENB), GPIO_FN(VI3_CLKENB), - GPIO_FN(AUDIO_CLKC), GPIO_FN(TX2_D), GPIO_FN(SPEEDIN), - GPIO_FN(GPS_SIGN_D), GPIO_FN(DU1_DISP), GPIO_FN(VI2_DATA6_VI2_B6), - GPIO_FN(TCLK0), GPIO_FN(QSTVA_B_QVS_B), GPIO_FN(HSPI_CLK1), - GPIO_FN(SCK2_D), GPIO_FN(AUDIO_CLKOUT_B), GPIO_FN(GPS_MAG_D), - GPIO_FN(DU1_CDE), GPIO_FN(VI2_DATA7_VI2_B7), GPIO_FN(RX3_B_IRDA_RX_B), - GPIO_FN(SD3_WP), GPIO_FN(HSPI_RX1), GPIO_FN(VI1_FIELD), - GPIO_FN(VI3_FIELD), GPIO_FN(AUDIO_CLKOUT), GPIO_FN(RX2_D), - GPIO_FN(GPS_CLK_C), GPIO_FN(GPS_CLK_D), GPIO_FN(AUDIO_CLKA), - GPIO_FN(CAN_TXCLK), GPIO_FN(AUDIO_CLKB), GPIO_FN(USB_OVC2), - GPIO_FN(CAN_DEBUGOUT0), GPIO_FN(MOUT0), - - /* IPSR6 */ - GPIO_FN(SSI_SCK0129), GPIO_FN(CAN_DEBUGOUT1), GPIO_FN(MOUT1), - GPIO_FN(SSI_WS0129), GPIO_FN(CAN_DEBUGOUT2), GPIO_FN(MOUT2), - GPIO_FN(SSI_SDATA0), GPIO_FN(CAN_DEBUGOUT3), GPIO_FN(MOUT5), - GPIO_FN(SSI_SDATA1), GPIO_FN(CAN_DEBUGOUT4), GPIO_FN(MOUT6), - GPIO_FN(SSI_SDATA2), GPIO_FN(CAN_DEBUGOUT5), GPIO_FN(SSI_SCK34), - GPIO_FN(CAN_DEBUGOUT6), GPIO_FN(CAN0_TX_B), GPIO_FN(IERX), - GPIO_FN(SSI_SCK9_C), GPIO_FN(SSI_WS34), GPIO_FN(CAN_DEBUGOUT7), - GPIO_FN(CAN0_RX_B), GPIO_FN(IETX), GPIO_FN(SSI_WS9_C), - GPIO_FN(SSI_SDATA3), GPIO_FN(PWM0_C), GPIO_FN(CAN_DEBUGOUT8), - GPIO_FN(CAN_CLK_B), GPIO_FN(IECLK), GPIO_FN(SCIF_CLK_B), - GPIO_FN(TCLK0_B), GPIO_FN(SSI_SDATA4), GPIO_FN(CAN_DEBUGOUT9), - GPIO_FN(SSI_SDATA9_C), GPIO_FN(SSI_SCK5), GPIO_FN(ADICLK), - GPIO_FN(CAN_DEBUGOUT10), GPIO_FN(SCK3), GPIO_FN(TCLK0_D), - GPIO_FN(SSI_WS5), GPIO_FN(ADICS_SAMP), GPIO_FN(CAN_DEBUGOUT11), - GPIO_FN(TX3_IRDA_TX), GPIO_FN(SSI_SDATA5), GPIO_FN(ADIDATA), - GPIO_FN(CAN_DEBUGOUT12), GPIO_FN(RX3_IRDA_RX), GPIO_FN(SSI_SCK6), - GPIO_FN(ADICHS0), GPIO_FN(CAN0_TX), GPIO_FN(IERX_B), - - /* IPSR7 */ - GPIO_FN(SSI_WS6), GPIO_FN(ADICHS1), GPIO_FN(CAN0_RX), GPIO_FN(IETX_B), - GPIO_FN(SSI_SDATA6), GPIO_FN(ADICHS2), GPIO_FN(CAN_CLK), - GPIO_FN(IECLK_B), GPIO_FN(SSI_SCK78), GPIO_FN(CAN_DEBUGOUT13), - GPIO_FN(IRQ0_B), GPIO_FN(SSI_SCK9_B), GPIO_FN(HSPI_CLK1_C), - GPIO_FN(SSI_WS78), GPIO_FN(CAN_DEBUGOUT14), GPIO_FN(IRQ1_B), - GPIO_FN(SSI_WS9_B), GPIO_FN(HSPI_CS1_C), GPIO_FN(SSI_SDATA7), - GPIO_FN(CAN_DEBUGOUT15), GPIO_FN(IRQ2_B), GPIO_FN(TCLK1_C), - GPIO_FN(HSPI_TX1_C), GPIO_FN(SSI_SDATA8), GPIO_FN(VSP), - GPIO_FN(IRQ3_B), GPIO_FN(HSPI_RX1_C), GPIO_FN(SD0_CLK), - GPIO_FN(ATACS01), GPIO_FN(SCK1_B), GPIO_FN(SD0_CMD), GPIO_FN(ATACS11), - GPIO_FN(TX1_B), GPIO_FN(CC5_TDO), GPIO_FN(SD0_DAT0), GPIO_FN(ATADIR1), - GPIO_FN(RX1_B), GPIO_FN(CC5_TRST), GPIO_FN(SD0_DAT1), GPIO_FN(ATAG1), - GPIO_FN(SCK2_B), GPIO_FN(CC5_TMS), GPIO_FN(SD0_DAT2), GPIO_FN(ATARD1), - GPIO_FN(TX2_B), GPIO_FN(CC5_TCK), GPIO_FN(SD0_DAT3), GPIO_FN(ATAWR1), - GPIO_FN(RX2_B), GPIO_FN(CC5_TDI), GPIO_FN(SD0_CD), GPIO_FN(DREQ2), - GPIO_FN(RTS1_B_TANS_B), GPIO_FN(SD0_WP), GPIO_FN(DACK2), - GPIO_FN(CTS1_B), - - /* IPSR8 */ - GPIO_FN(HSPI_CLK0), GPIO_FN(CTS0), GPIO_FN(USB_OVC0), GPIO_FN(AD_CLK), - GPIO_FN(CC5_STATE4), GPIO_FN(CC5_STATE12), GPIO_FN(CC5_STATE20), - GPIO_FN(CC5_STATE28), GPIO_FN(CC5_STATE36), GPIO_FN(HSPI_CS0), - GPIO_FN(RTS0_TANS), GPIO_FN(USB_OVC1), GPIO_FN(AD_DI), - GPIO_FN(CC5_STATE5), GPIO_FN(CC5_STATE13), GPIO_FN(CC5_STATE21), - GPIO_FN(CC5_STATE29), GPIO_FN(CC5_STATE37), GPIO_FN(HSPI_TX0), - GPIO_FN(TX0), GPIO_FN(CAN_DEBUG_HW_TRIGGER), GPIO_FN(AD_DO), - GPIO_FN(CC5_STATE6), GPIO_FN(CC5_STATE14), GPIO_FN(CC5_STATE22), - GPIO_FN(CC5_STATE30), GPIO_FN(CC5_STATE38), GPIO_FN(HSPI_RX0), - GPIO_FN(RX0), GPIO_FN(CAN_STEP0), GPIO_FN(AD_NCS), GPIO_FN(CC5_STATE7), - GPIO_FN(CC5_STATE15), GPIO_FN(CC5_STATE23), GPIO_FN(CC5_STATE31), - GPIO_FN(CC5_STATE39), GPIO_FN(FMCLK), GPIO_FN(RDS_CLK), GPIO_FN(PCMOE), - GPIO_FN(BPFCLK), GPIO_FN(PCMWE), GPIO_FN(FMIN), GPIO_FN(RDS_DATA), - GPIO_FN(VI0_CLK), GPIO_FN(MMC1_CLK), GPIO_FN(VI0_CLKENB), - GPIO_FN(TX1_C), GPIO_FN(HTX1_B), GPIO_FN(MT1_SYNC), - GPIO_FN(VI0_FIELD), GPIO_FN(RX1_C), GPIO_FN(HRX1_B), - GPIO_FN(VI0_HSYNC), GPIO_FN(VI0_DATA0_B_VI0_B0_B), GPIO_FN(CTS1_C), - GPIO_FN(TX4_D), GPIO_FN(MMC1_CMD), GPIO_FN(HSCK1_B), - GPIO_FN(VI0_VSYNC), GPIO_FN(VI0_DATA1_B_VI0_B1_B), - GPIO_FN(RTS1_C_TANS_C), GPIO_FN(RX4_D), GPIO_FN(PWMFSW0_C), - - /* IPSR9 */ - GPIO_FN(VI0_DATA0_VI0_B0), GPIO_FN(HRTS1_B), GPIO_FN(MT1_VCXO), - GPIO_FN(VI0_DATA1_VI0_B1), GPIO_FN(HCTS1_B), GPIO_FN(MT1_PWM), - GPIO_FN(VI0_DATA2_VI0_B2), GPIO_FN(MMC1_D0), GPIO_FN(VI0_DATA3_VI0_B3), - GPIO_FN(MMC1_D1), GPIO_FN(VI0_DATA4_VI0_B4), GPIO_FN(MMC1_D2), - GPIO_FN(VI0_DATA5_VI0_B5), GPIO_FN(MMC1_D3), GPIO_FN(VI0_DATA6_VI0_B6), - GPIO_FN(MMC1_D4), GPIO_FN(ARM_TRACEDATA_0), GPIO_FN(VI0_DATA7_VI0_B7), - GPIO_FN(MMC1_D5), GPIO_FN(ARM_TRACEDATA_1), GPIO_FN(VI0_G0), - GPIO_FN(SSI_SCK78_C), GPIO_FN(IRQ0), GPIO_FN(ARM_TRACEDATA_2), - GPIO_FN(VI0_G1), GPIO_FN(SSI_WS78_C), GPIO_FN(IRQ1), - GPIO_FN(ARM_TRACEDATA_3), GPIO_FN(VI0_G2), GPIO_FN(ETH_TXD1), - GPIO_FN(MMC1_D6), GPIO_FN(ARM_TRACEDATA_4), GPIO_FN(TS_SPSYNC0), - GPIO_FN(VI0_G3), GPIO_FN(ETH_CRS_DV), GPIO_FN(MMC1_D7), - GPIO_FN(ARM_TRACEDATA_5), GPIO_FN(TS_SDAT0), GPIO_FN(VI0_G4), - GPIO_FN(ETH_TX_EN), GPIO_FN(SD2_DAT0_B), GPIO_FN(ARM_TRACEDATA_6), - GPIO_FN(VI0_G5), GPIO_FN(ETH_RX_ER), GPIO_FN(SD2_DAT1_B), - GPIO_FN(ARM_TRACEDATA_7), GPIO_FN(VI0_G6), GPIO_FN(ETH_RXD0), - GPIO_FN(SD2_DAT2_B), GPIO_FN(ARM_TRACEDATA_8), GPIO_FN(VI0_G7), - GPIO_FN(ETH_RXD1), GPIO_FN(SD2_DAT3_B), GPIO_FN(ARM_TRACEDATA_9), - - /* IPSR10 */ - GPIO_FN(VI0_R0), GPIO_FN(SSI_SDATA7_C), GPIO_FN(SCK1_C), - GPIO_FN(DREQ1_B), GPIO_FN(ARM_TRACEDATA_10), GPIO_FN(DREQ0_C), - GPIO_FN(VI0_R1), GPIO_FN(SSI_SDATA8_C), GPIO_FN(DACK1_B), - GPIO_FN(ARM_TRACEDATA_11), GPIO_FN(DACK0_C), GPIO_FN(DRACK0_C), - GPIO_FN(VI0_R2), GPIO_FN(ETH_LINK), GPIO_FN(SD2_CLK_B), GPIO_FN(IRQ2), - GPIO_FN(ARM_TRACEDATA_12), GPIO_FN(VI0_R3), GPIO_FN(ETH_MAGIC), - GPIO_FN(SD2_CMD_B), GPIO_FN(IRQ3), GPIO_FN(ARM_TRACEDATA_13), - GPIO_FN(VI0_R4), GPIO_FN(ETH_REFCLK), GPIO_FN(SD2_CD_B), - GPIO_FN(HSPI_CLK1_B), GPIO_FN(ARM_TRACEDATA_14), GPIO_FN(MT1_CLK), - GPIO_FN(TS_SCK0), GPIO_FN(VI0_R5), GPIO_FN(ETH_TXD0), - GPIO_FN(SD2_WP_B), GPIO_FN(HSPI_CS1_B), GPIO_FN(ARM_TRACEDATA_15), - GPIO_FN(MT1_D), GPIO_FN(TS_SDEN0), GPIO_FN(VI0_R6), GPIO_FN(ETH_MDC), - GPIO_FN(DREQ2_C), GPIO_FN(HSPI_TX1_B), GPIO_FN(TRACECLK), - GPIO_FN(MT1_BEN), GPIO_FN(PWMFSW0_D), GPIO_FN(VI0_R7), - GPIO_FN(ETH_MDIO), GPIO_FN(DACK2_C), GPIO_FN(HSPI_RX1_B), - GPIO_FN(SCIF_CLK_D), GPIO_FN(TRACECTL), GPIO_FN(MT1_PEN), - GPIO_FN(VI1_CLK), GPIO_FN(SIM_D), GPIO_FN(SDA3), GPIO_FN(VI1_HSYNC), - GPIO_FN(VI3_CLK), GPIO_FN(SSI_SCK4), GPIO_FN(GPS_SIGN_C), - GPIO_FN(PWMFSW0_E), GPIO_FN(VI1_VSYNC), GPIO_FN(AUDIO_CLKOUT_C), - GPIO_FN(SSI_WS4), GPIO_FN(SIM_CLK), GPIO_FN(GPS_MAG_C), - GPIO_FN(SPV_TRST), GPIO_FN(SCL3), - - /* IPSR11 */ - GPIO_FN(VI1_DATA0_VI1_B0), GPIO_FN(SD2_DAT0), GPIO_FN(SIM_RST), - GPIO_FN(SPV_TCK), GPIO_FN(ADICLK_B), GPIO_FN(VI1_DATA1_VI1_B1), - GPIO_FN(SD2_DAT1), GPIO_FN(MT0_CLK), GPIO_FN(SPV_TMS), - GPIO_FN(ADICS_B_SAMP_B), GPIO_FN(VI1_DATA2_VI1_B2), GPIO_FN(SD2_DAT2), - GPIO_FN(MT0_D), GPIO_FN(SPVTDI), GPIO_FN(ADIDATA_B), - GPIO_FN(VI1_DATA3_VI1_B3), GPIO_FN(SD2_DAT3), GPIO_FN(MT0_BEN), - GPIO_FN(SPV_TDO), GPIO_FN(ADICHS0_B), GPIO_FN(VI1_DATA4_VI1_B4), - GPIO_FN(SD2_CLK), GPIO_FN(MT0_PEN), GPIO_FN(SPA_TRST), - GPIO_FN(HSPI_CLK1_D), GPIO_FN(ADICHS1_B), GPIO_FN(VI1_DATA5_VI1_B5), - GPIO_FN(SD2_CMD), GPIO_FN(MT0_SYNC), GPIO_FN(SPA_TCK), - GPIO_FN(HSPI_CS1_D), GPIO_FN(ADICHS2_B), GPIO_FN(VI1_DATA6_VI1_B6), - GPIO_FN(SD2_CD), GPIO_FN(MT0_VCXO), GPIO_FN(SPA_TMS), - GPIO_FN(HSPI_TX1_D), GPIO_FN(VI1_DATA7_VI1_B7), GPIO_FN(SD2_WP), - GPIO_FN(MT0_PWM), GPIO_FN(SPA_TDI), GPIO_FN(HSPI_RX1_D), - GPIO_FN(VI1_G0), GPIO_FN(VI3_DATA0), GPIO_FN(DU1_DOTCLKOUT1), - GPIO_FN(TS_SCK1), GPIO_FN(DREQ2_B), GPIO_FN(TX2), GPIO_FN(SPA_TDO), - GPIO_FN(HCTS0_B), GPIO_FN(VI1_G1), GPIO_FN(VI3_DATA1), - GPIO_FN(SSI_SCK1), GPIO_FN(TS_SDEN1), GPIO_FN(DACK2_B), GPIO_FN(RX2), - GPIO_FN(HRTS0_B), - - /* IPSR12 */ - GPIO_FN(VI1_G2), GPIO_FN(VI3_DATA2), GPIO_FN(SSI_WS1), - GPIO_FN(TS_SPSYNC1), GPIO_FN(SCK2), GPIO_FN(HSCK0_B), GPIO_FN(VI1_G3), - GPIO_FN(VI3_DATA3), GPIO_FN(SSI_SCK2), GPIO_FN(TS_SDAT1), - GPIO_FN(SCL1_C), GPIO_FN(HTX0_B), GPIO_FN(VI1_G4), GPIO_FN(VI3_DATA4), - GPIO_FN(SSI_WS2), GPIO_FN(SDA1_C), GPIO_FN(SIM_RST_B), - GPIO_FN(HRX0_B), GPIO_FN(VI1_G5), GPIO_FN(VI3_DATA5), - GPIO_FN(GPS_CLK), GPIO_FN(FSE), GPIO_FN(TX4_B), GPIO_FN(SIM_D_B), - GPIO_FN(VI1_G6), GPIO_FN(VI3_DATA6), GPIO_FN(GPS_SIGN), GPIO_FN(FRB), - GPIO_FN(RX4_B), GPIO_FN(SIM_CLK_B), GPIO_FN(VI1_G7), - GPIO_FN(VI3_DATA7), GPIO_FN(GPS_MAG), GPIO_FN(FCE), GPIO_FN(SCK4_B), -}; - -static struct pinmux_cfg_reg pinmux_config_regs[] = { - { PINMUX_CFG_REG("GPSR0", 0xfffc0004, 32, 1) { - GP_0_31_FN, FN_IP3_31_29, - GP_0_30_FN, FN_IP3_26_24, - GP_0_29_FN, FN_IP3_22_21, - GP_0_28_FN, FN_IP3_14_12, - GP_0_27_FN, FN_IP3_11_9, - GP_0_26_FN, FN_IP3_2_0, - GP_0_25_FN, FN_IP2_30_28, - GP_0_24_FN, FN_IP2_21_19, - GP_0_23_FN, FN_IP2_18_16, - GP_0_22_FN, FN_IP0_30_28, - GP_0_21_FN, FN_IP0_5_3, - GP_0_20_FN, FN_IP1_18_15, - GP_0_19_FN, FN_IP1_14_11, - GP_0_18_FN, FN_IP1_10_7, - GP_0_17_FN, FN_IP1_6_4, - GP_0_16_FN, FN_IP1_3_2, - GP_0_15_FN, FN_IP1_1_0, - GP_0_14_FN, FN_IP0_27_26, - GP_0_13_FN, FN_IP0_25, - GP_0_12_FN, FN_IP0_24_23, - GP_0_11_FN, FN_IP0_22_19, - GP_0_10_FN, FN_IP0_18_16, - GP_0_9_FN, FN_IP0_15_14, - GP_0_8_FN, FN_IP0_13_12, - GP_0_7_FN, FN_IP0_11_10, - GP_0_6_FN, FN_IP0_9_8, - GP_0_5_FN, FN_A19, - GP_0_4_FN, FN_A18, - GP_0_3_FN, FN_A17, - GP_0_2_FN, FN_IP0_7_6, - GP_0_1_FN, FN_AVS2, - GP_0_0_FN, FN_AVS1 } - }, - { PINMUX_CFG_REG("GPSR1", 0xfffc0008, 32, 1) { - GP_1_31_FN, FN_IP5_23_21, - GP_1_30_FN, FN_IP5_20_17, - GP_1_29_FN, FN_IP5_16_15, - GP_1_28_FN, FN_IP5_14_13, - GP_1_27_FN, FN_IP5_12_11, - GP_1_26_FN, FN_IP5_10_9, - GP_1_25_FN, FN_IP5_8, - GP_1_24_FN, FN_IP5_7, - GP_1_23_FN, FN_IP5_6, - GP_1_22_FN, FN_IP5_5, - GP_1_21_FN, FN_IP5_4, - GP_1_20_FN, FN_IP5_3, - GP_1_19_FN, FN_IP5_2_0, - GP_1_18_FN, FN_IP4_31_29, - GP_1_17_FN, FN_IP4_28, - GP_1_16_FN, FN_IP4_27, - GP_1_15_FN, FN_IP4_26, - GP_1_14_FN, FN_IP4_25, - GP_1_13_FN, FN_IP4_24, - GP_1_12_FN, FN_IP4_23, - GP_1_11_FN, FN_IP4_22_20, - GP_1_10_FN, FN_IP4_19_17, - GP_1_9_FN, FN_IP4_16, - GP_1_8_FN, FN_IP4_15, - GP_1_7_FN, FN_IP4_14, - GP_1_6_FN, FN_IP4_13, - GP_1_5_FN, FN_IP4_12, - GP_1_4_FN, FN_IP4_11, - GP_1_3_FN, FN_IP4_10_8, - GP_1_2_FN, FN_IP4_7_5, - GP_1_1_FN, FN_IP4_4_2, - GP_1_0_FN, FN_IP4_1_0 } - }, - { PINMUX_CFG_REG("GPSR2", 0xfffc000c, 32, 1) { - GP_2_31_FN, FN_IP10_28_26, - GP_2_30_FN, FN_IP10_25_24, - GP_2_29_FN, FN_IP10_23_21, - GP_2_28_FN, FN_IP10_20_18, - GP_2_27_FN, FN_IP10_17_15, - GP_2_26_FN, FN_IP10_14_12, - GP_2_25_FN, FN_IP10_11_9, - GP_2_24_FN, FN_IP10_8_6, - GP_2_23_FN, FN_IP10_5_3, - GP_2_22_FN, FN_IP10_2_0, - GP_2_21_FN, FN_IP9_29_28, - GP_2_20_FN, FN_IP9_27_26, - GP_2_19_FN, FN_IP9_25_24, - GP_2_18_FN, FN_IP9_23_22, - GP_2_17_FN, FN_IP9_21_19, - GP_2_16_FN, FN_IP9_18_16, - GP_2_15_FN, FN_IP9_15_14, - GP_2_14_FN, FN_IP9_13_12, - GP_2_13_FN, FN_IP9_11_10, - GP_2_12_FN, FN_IP9_9_8, - GP_2_11_FN, FN_IP9_7, - GP_2_10_FN, FN_IP9_6, - GP_2_9_FN, FN_IP9_5, - GP_2_8_FN, FN_IP9_4, - GP_2_7_FN, FN_IP9_3_2, - GP_2_6_FN, FN_IP9_1_0, - GP_2_5_FN, FN_IP8_30_28, - GP_2_4_FN, FN_IP8_27_25, - GP_2_3_FN, FN_IP8_24_23, - GP_2_2_FN, FN_IP8_22_21, - GP_2_1_FN, FN_IP8_20, - GP_2_0_FN, FN_IP5_27_24 } - }, - { PINMUX_CFG_REG("GPSR3", 0xfffc0010, 32, 1) { - GP_3_31_FN, FN_IP6_3_2, - GP_3_30_FN, FN_IP6_1_0, - GP_3_29_FN, FN_IP5_30_29, - GP_3_28_FN, FN_IP5_28, - GP_3_27_FN, FN_IP1_24_23, - GP_3_26_FN, FN_IP1_22_21, - GP_3_25_FN, FN_IP1_20_19, - GP_3_24_FN, FN_IP7_26_25, - GP_3_23_FN, FN_IP7_24_23, - GP_3_22_FN, FN_IP7_22_21, - GP_3_21_FN, FN_IP7_20_19, - GP_3_20_FN, FN_IP7_30_29, - GP_3_19_FN, FN_IP7_28_27, - GP_3_18_FN, FN_IP7_18_17, - GP_3_17_FN, FN_IP7_16_15, - GP_3_16_FN, FN_IP12_17_15, - GP_3_15_FN, FN_IP12_14_12, - GP_3_14_FN, FN_IP12_11_9, - GP_3_13_FN, FN_IP12_8_6, - GP_3_12_FN, FN_IP12_5_3, - GP_3_11_FN, FN_IP12_2_0, - GP_3_10_FN, FN_IP11_29_27, - GP_3_9_FN, FN_IP11_26_24, - GP_3_8_FN, FN_IP11_23_21, - GP_3_7_FN, FN_IP11_20_18, - GP_3_6_FN, FN_IP11_17_15, - GP_3_5_FN, FN_IP11_14_12, - GP_3_4_FN, FN_IP11_11_9, - GP_3_3_FN, FN_IP11_8_6, - GP_3_2_FN, FN_IP11_5_3, - GP_3_1_FN, FN_IP11_2_0, - GP_3_0_FN, FN_IP10_31_29 } - }, - { PINMUX_CFG_REG("GPSR4", 0xfffc0014, 32, 1) { - GP_4_31_FN, FN_IP8_19, - GP_4_30_FN, FN_IP8_18, - GP_4_29_FN, FN_IP8_17_16, - GP_4_28_FN, FN_IP0_2_0, - GP_4_27_FN, FN_USB_PENC1, - GP_4_26_FN, FN_USB_PENC0, - GP_4_25_FN, FN_IP8_15_12, - GP_4_24_FN, FN_IP8_11_8, - GP_4_23_FN, FN_IP8_7_4, - GP_4_22_FN, FN_IP8_3_0, - GP_4_21_FN, FN_IP2_3_0, - GP_4_20_FN, FN_IP1_28_25, - GP_4_19_FN, FN_IP2_15_12, - GP_4_18_FN, FN_IP2_11_8, - GP_4_17_FN, FN_IP2_7_4, - GP_4_16_FN, FN_IP7_14_13, - GP_4_15_FN, FN_IP7_12_10, - GP_4_14_FN, FN_IP7_9_7, - GP_4_13_FN, FN_IP7_6_4, - GP_4_12_FN, FN_IP7_3_2, - GP_4_11_FN, FN_IP7_1_0, - GP_4_10_FN, FN_IP6_30_29, - GP_4_9_FN, FN_IP6_26_25, - GP_4_8_FN, FN_IP6_24_23, - GP_4_7_FN, FN_IP6_22_20, - GP_4_6_FN, FN_IP6_19_18, - GP_4_5_FN, FN_IP6_17_15, - GP_4_4_FN, FN_IP6_14_12, - GP_4_3_FN, FN_IP6_11_9, - GP_4_2_FN, FN_IP6_8, - GP_4_1_FN, FN_IP6_7_6, - GP_4_0_FN, FN_IP6_5_4 } - }, - { PINMUX_CFG_REG("GPSR5", 0xfffc0018, 32, 1) { - GP_5_31_FN, FN_IP3_5, - GP_5_30_FN, FN_IP3_4, - GP_5_29_FN, FN_IP3_3, - GP_5_28_FN, FN_IP2_27, - GP_5_27_FN, FN_IP2_26, - GP_5_26_FN, FN_IP2_25, - GP_5_25_FN, FN_IP2_24, - GP_5_24_FN, FN_IP2_23, - GP_5_23_FN, FN_IP2_22, - GP_5_22_FN, FN_IP3_28, - GP_5_21_FN, FN_IP3_27, - GP_5_20_FN, FN_IP3_23, - GP_5_19_FN, FN_EX_WAIT0, - GP_5_18_FN, FN_WE1, - GP_5_17_FN, FN_WE0, - GP_5_16_FN, FN_RD, - GP_5_15_FN, FN_A16, - GP_5_14_FN, FN_A15, - GP_5_13_FN, FN_A14, - GP_5_12_FN, FN_A13, - GP_5_11_FN, FN_A12, - GP_5_10_FN, FN_A11, - GP_5_9_FN, FN_A10, - GP_5_8_FN, FN_A9, - GP_5_7_FN, FN_A8, - GP_5_6_FN, FN_A7, - GP_5_5_FN, FN_A6, - GP_5_4_FN, FN_A5, - GP_5_3_FN, FN_A4, - GP_5_2_FN, FN_A3, - GP_5_1_FN, FN_A2, - GP_5_0_FN, FN_A1 } - }, - { PINMUX_CFG_REG("GPSR6", 0xfffc001c, 32, 1) { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, - 0, 0, - 0, 0, - GP_6_8_FN, FN_IP3_20, - GP_6_7_FN, FN_IP3_19, - GP_6_6_FN, FN_IP3_18, - GP_6_5_FN, FN_IP3_17, - GP_6_4_FN, FN_IP3_16, - GP_6_3_FN, FN_IP3_15, - GP_6_2_FN, FN_IP3_8, - GP_6_1_FN, FN_IP3_7, - GP_6_0_FN, FN_IP3_6 } - }, - - { PINMUX_CFG_REG_VAR("IPSR0", 0xfffc0020, 32, - 1, 3, 2, 1, 2, 4, 3, 2, 2, 2, 2, 2, 3, 3) { - /* IP0_31 [1] */ - 0, 0, - /* IP0_30_28 [3] */ - FN_RD_WR, FN_FWE, FN_ATAG0, FN_VI1_R7, - FN_HRTS1, FN_RX4_C, 0, 0, - /* IP0_27_26 [2] */ - FN_CS1_A26, FN_HSPI_TX2, FN_SDSELF_B, 0, - /* IP0_25 [1] */ - FN_CS0, FN_HSPI_CS2_B, - /* IP0_24_23 [2] */ - FN_CLKOUT, FN_TX3C_IRDA_TX_C, FN_PWM0_B, 0, - /* IP0_22_19 [4] */ - FN_A25, FN_SD1_WP, FN_MMC0_D5, FN_FD5, - FN_HSPI_RX2, FN_VI1_R3, FN_TX5_B, FN_SSI_SDATA7_B, - FN_CTS0_B, 0, 0, 0, - 0, 0, 0, 0, - /* IP0_18_16 [3] */ - FN_A24, FN_SD1_CD, FN_MMC0_D4, FN_FD4, - FN_HSPI_CS2, FN_VI1_R2, FN_SSI_WS78_B, 0, - /* IP0_15_14 [2] */ - FN_A23, FN_FCLE, FN_HSPI_CLK2, FN_VI1_R1, - /* IP0_13_12 [2] */ - FN_A22, FN_RX5_D, FN_HSPI_RX2_B, FN_VI1_R0, - /* IP0_11_10 [2] */ - FN_A21, FN_SCK5_D, FN_HSPI_CLK2_B, 0, - /* IP0_9_8 [2] */ - FN_A20, FN_TX5_D, FN_HSPI_TX2_B, 0, - /* IP0_7_6 [2] */ - FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3, - /* IP0_5_3 [3] */ - FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2, - FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C, - /* IP0_2_0 [3] */ - FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0, - FN_SCIF_CLK, FN_TCLK0_C, 0, 0 } - }, - { PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32, - 3, 4, 2, 2, 2, 4, 4, 4, 3, 2, 2) { - /* IP1_31_29 [3] */ - 0, 0, 0, 0, 0, 0, 0, 0, - /* IP1_28_25 [4] */ - FN_HTX0, FN_TX1, FN_SDATA, FN_CTS0_C, - FN_SUB_TCK, FN_CC5_STATE2, FN_CC5_STATE10, FN_CC5_STATE18, - FN_CC5_STATE26, FN_CC5_STATE34, 0, 0, - 0, 0, 0, 0, - /* IP1_24_23 [2] */ - FN_MLB_DAT, FN_PWM4, FN_RX4, 0, - /* IP1_22_21 [2] */ - FN_MLB_SIG, FN_PWM3, FN_TX4, 0, - /* IP1_20_19 [2] */ - FN_MLB_CLK, FN_PWM2, FN_SCK4, 0, - /* IP1_18_15 [4] */ - FN_EX_CS5, FN_SD1_DAT1, FN_MMC0_D1, FN_FD1, - FN_ATAWR0, FN_VI1_R6, FN_HRX1, FN_RX2_E, - FN_RX0_B, FN_SSI_WS9, 0, 0, - 0, 0, 0, 0, - /* IP1_14_11 [4] */ - FN_EX_CS4, FN_SD1_DAT0, FN_MMC0_D0, FN_FD0, - FN_ATARD0, FN_VI1_R5, FN_SCK5_B, FN_HTX1, - FN_TX2_E, FN_TX0_B, FN_SSI_SCK9, 0, - 0, 0, 0, 0, - /* IP1_10_7 [4] */ - FN_EX_CS3, FN_SD1_CMD, FN_MMC0_CMD, FN_FRE, - FN_ATACS10, FN_VI1_R4, FN_RX5_B, FN_HSCK1, - FN_SSI_SDATA8_B, FN_RTS0_B_TANS_B, FN_SSI_SDATA9, 0, - 0, 0, 0, 0, - /* IP1_6_4 [3] */ - FN_EX_CS2, FN_SD1_CLK, FN_MMC0_CLK, FN_FALE, - FN_ATACS00, 0, 0, 0, - /* IP1_3_2 [2] */ - FN_EX_CS1, FN_MMC0_D7, FN_FD7, 0, - /* IP1_1_0 [2] */ - FN_EX_CS0, FN_RX3_C_IRDA_RX_C, FN_MMC0_D6, FN_FD6 } - }, - { PINMUX_CFG_REG_VAR("IPSR2", 0xfffc0028, 32, - 1, 3, 1, 1, 1, 1, 1, 1, 3, 3, 4, 4, 4, 4) { - /* IP2_31 [1] */ - 0, 0, - /* IP2_30_28 [3] */ - FN_DU0_DG0, FN_LCDOUT8, FN_DREQ1, FN_SCL2, - FN_AUDATA2, 0, 0, 0, - /* IP2_27 [1] */ - FN_DU0_DR7, FN_LCDOUT7, - /* IP2_26 [1] */ - FN_DU0_DR6, FN_LCDOUT6, - /* IP2_25 [1] */ - FN_DU0_DR5, FN_LCDOUT5, - /* IP2_24 [1] */ - FN_DU0_DR4, FN_LCDOUT4, - /* IP2_23 [1] */ - FN_DU0_DR3, FN_LCDOUT3, - /* IP2_22 [1] */ - FN_DU0_DR2, FN_LCDOUT2, - /* IP2_21_19 [3] */ - FN_DU0_DR1, FN_LCDOUT1, FN_DACK0, FN_DRACK0, - FN_GPS_SIGN_B, FN_AUDATA1, FN_RX5_C, 0, - /* IP2_18_16 [3] */ - FN_DU0_DR0, FN_LCDOUT0, FN_DREQ0, FN_GPS_CLK_B, - FN_AUDATA0, FN_TX5_C, 0, 0, - /* IP2_15_12 [4] */ - FN_HRTS0, FN_RTS1_TANS, FN_MDATA, FN_TX0_C, - FN_SUB_TMS, FN_CC5_STATE1, FN_CC5_STATE9, FN_CC5_STATE17, - FN_CC5_STATE25, FN_CC5_STATE33, 0, 0, - 0, 0, 0, 0, - /* IP2_11_8 [4] */ - FN_HCTS0, FN_CTS1, FN_STM, FN_PWM0_D, - FN_RX0_C, FN_SCIF_CLK_C, FN_SUB_TRST, FN_TCLK1_B, - FN_CC5_OSCOUT, 0, 0, 0, - 0, 0, 0, 0, - /* IP2_7_4 [4] */ - FN_HSCK0, FN_SCK1, FN_MTS, FN_PWM5, - FN_SCK0_C, FN_SSI_SDATA9_B, FN_SUB_TDO, FN_CC5_STATE0, - FN_CC5_STATE8, FN_CC5_STATE16, FN_CC5_STATE24, FN_CC5_STATE32, - 0, 0, 0, 0, - /* IP2_3_0 [4] */ - FN_HRX0, FN_RX1, FN_SCKZ, FN_RTS0_C_TANS_C, - FN_SUB_TDI, FN_CC5_STATE3, FN_CC5_STATE11, FN_CC5_STATE19, - FN_CC5_STATE27, FN_CC5_STATE35, 0, 0, - 0, 0, 0, 0 } - }, - { PINMUX_CFG_REG_VAR("IPSR3", 0xfffc002c, 32, - 3, 1, 1, 3, 1, 2, 1, 1, 1, 1, 1, - 1, 3, 3, 1, 1, 1, 1, 1, 1, 3) { - /* IP3_31_29 [3] */ - FN_DU0_EXODDF_DU0_ODDF_DISP_CDE, FN_QCPV_QDE, FN_CAN1_TX, FN_TX2_C, - FN_SCL2_C, FN_REMOCON, 0, 0, - /* IP3_28 [1] */ - FN_DU0_EXVSYNC_DU0_VSYNC, FN_QSTB_QHE, - /* IP3_27 [1] */ - FN_DU0_EXHSYNC_DU0_HSYNC, FN_QSTH_QHS, - /* IP3_26_24 [3] */ - FN_DU0_DOTCLKOUT1, FN_QSTVB_QVE, FN_RX3_D_IRDA_RX_D, FN_SDA3_B, - FN_SDA2_C, FN_DACK0_B, FN_DRACK0_B, 0, - /* IP3_23 [1] */ - FN_DU0_DOTCLKOUT0, FN_QCLK, - /* IP3_22_21 [2] */ - FN_DU0_DOTCLKIN, FN_QSTVA_QVS, FN_TX3_D_IRDA_TX_D, FN_SCL3_B, - /* IP3_20 [1] */ - FN_DU0_DB7, FN_LCDOUT23, - /* IP3_19 [1] */ - FN_DU0_DB6, FN_LCDOUT22, - /* IP3_18 [1] */ - FN_DU0_DB5, FN_LCDOUT21, - /* IP3_17 [1] */ - FN_DU0_DB4, FN_LCDOUT20, - /* IP3_16 [1] */ - FN_DU0_DB3, FN_LCDOUT19, - /* IP3_15 [1] */ - FN_DU0_DB2, FN_LCDOUT18, - /* IP3_14_12 [3] */ - FN_DU0_DB1, FN_LCDOUT17, FN_EX_WAIT2, FN_SDA1, - FN_GPS_MAG_B, FN_AUDATA5, FN_SCK5_C, 0, - /* IP3_11_9 [3] */ - FN_DU0_DB0, FN_LCDOUT16, FN_EX_WAIT1, FN_SCL1, - FN_TCLK1, FN_AUDATA4, 0, 0, - /* IP3_8 [1] */ - FN_DU0_DG7, FN_LCDOUT15, - /* IP3_7 [1] */ - FN_DU0_DG6, FN_LCDOUT14, - /* IP3_6 [1] */ - FN_DU0_DG5, FN_LCDOUT13, - /* IP3_5 [1] */ - FN_DU0_DG4, FN_LCDOUT12, - /* IP3_4 [1] */ - FN_DU0_DG3, FN_LCDOUT11, - /* IP3_3 [1] */ - FN_DU0_DG2, FN_LCDOUT10, - /* IP3_2_0 [3] */ - FN_DU0_DG1, FN_LCDOUT9, FN_DACK1, FN_SDA2, - FN_AUDATA3, 0, 0, 0 } - }, - { PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32, - 3, 1, 1, 1, 1, 1, 1, 3, 3, - 1, 1, 1, 1, 1, 1, 3, 3, 3, 2) { - /* IP4_31_29 [3] */ - FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, - FN_TX5, FN_SCK0_D, 0, 0, - /* IP4_28 [1] */ - FN_DU1_DG7, FN_VI2_R3, - /* IP4_27 [1] */ - FN_DU1_DG6, FN_VI2_R2, - /* IP4_26 [1] */ - FN_DU1_DG5, FN_VI2_R1, - /* IP4_25 [1] */ - FN_DU1_DG4, FN_VI2_R0, - /* IP4_24 [1] */ - FN_DU1_DG3, FN_VI2_G7, - /* IP4_23 [1] */ - FN_DU1_DG2, FN_VI2_G6, - /* IP4_22_20 [3] */ - FN_DU1_DG1, FN_VI2_DATA3_VI2_B3, FN_SDA1_B, FN_SD3_DAT3, - FN_SCK5, FN_AUDATA7, FN_RX0_D, 0, - /* IP4_19_17 [3] */ - FN_DU1_DG0, FN_VI2_DATA2_VI2_B2, FN_SCL1_B, FN_SD3_DAT2, - FN_SCK3_E, FN_AUDATA6, FN_TX0_D, 0, - /* IP4_16 [1] */ - FN_DU1_DR7, FN_VI2_G5, - /* IP4_15 [1] */ - FN_DU1_DR6, FN_VI2_G4, - /* IP4_14 [1] */ - FN_DU1_DR5, FN_VI2_G3, - /* IP4_13 [1] */ - FN_DU1_DR4, FN_VI2_G2, - /* IP4_12 [1] */ - FN_DU1_DR3, FN_VI2_G1, - /* IP4_11 [1] */ - FN_DU1_DR2, FN_VI2_G0, - /* IP4_10_8 [3] */ - FN_DU1_DR1, FN_VI2_DATA1_VI2_B1, FN_PWM0, FN_SD3_CMD, - FN_RX3_E_IRDA_RX_E, FN_AUDSYNC, FN_CTS0_D, 0, - /* IP4_7_5 [3] */ - FN_DU1_DR0, FN_VI2_DATA0_VI2_B0, FN_PWM6, FN_SD3_CLK, - FN_TX3_E_IRDA_TX_E, FN_AUDCK, FN_PWMFSW0_B, 0, - /* IP4_4_2 [3] */ - FN_DU0_CDE, FN_QPOLB, FN_CAN1_RX, FN_RX2_C, - FN_DREQ0_B, FN_SSI_SCK78_B, FN_SCK0_B, 0, - /* IP4_1_0 [2] */ - FN_DU0_DISP, FN_QPOLA, FN_CAN_CLK_C, FN_SCK2_C } - }, - { PINMUX_CFG_REG_VAR("IPSR5", 0xfffc0034, 32, - 1, 2, 1, 4, 3, 4, 2, 2, - 2, 2, 1, 1, 1, 1, 1, 1, 3) { - /* IP5_31 [1] */ - 0, 0, - /* IP5_30_29 [2] */ - FN_AUDIO_CLKB, FN_USB_OVC2, FN_CAN_DEBUGOUT0, FN_MOUT0, - /* IP5_28 [1] */ - FN_AUDIO_CLKA, FN_CAN_TXCLK, - /* IP5_27_24 [4] */ - FN_DU1_CDE, FN_VI2_DATA7_VI2_B7, FN_RX3_B_IRDA_RX_B, FN_SD3_WP, - FN_HSPI_RX1, FN_VI1_FIELD, FN_VI3_FIELD, FN_AUDIO_CLKOUT, - FN_RX2_D, FN_GPS_CLK_C, FN_GPS_CLK_D, 0, - 0, 0, 0, 0, - /* IP5_23_21 [3] */ - FN_DU1_DISP, FN_VI2_DATA6_VI2_B6, FN_TCLK0, FN_QSTVA_B_QVS_B, - FN_HSPI_CLK1, FN_SCK2_D, FN_AUDIO_CLKOUT_B, FN_GPS_MAG_D, - /* IP5_20_17 [4] */ - FN_DU1_EXODDF_DU1_ODDF_DISP_CDE, FN_VI2_CLK, FN_TX3_B_IRDA_TX_B, - FN_SD3_CD, FN_HSPI_TX1, FN_VI1_CLKENB, FN_VI3_CLKENB, - FN_AUDIO_CLKC, FN_TX2_D, FN_SPEEDIN, FN_GPS_SIGN_D, 0, - 0, 0, 0, 0, - /* IP5_16_15 [2] */ - FN_DU1_EXVSYNC_DU1_VSYNC, FN_VI2_VSYNC, FN_VI3_VSYNC, 0, - /* IP5_14_13 [2] */ - FN_DU1_EXHSYNC_DU1_HSYNC, FN_VI2_HSYNC, FN_VI3_HSYNC, 0, - /* IP5_12_11 [2] */ - FN_DU1_DOTCLKOUT, FN_VI2_FIELD, FN_SDA1_D, 0, - /* IP5_10_9 [2] */ - FN_DU1_DOTCLKIN, FN_VI2_CLKENB, FN_HSPI_CS1, FN_SCL1_D, - /* IP5_8 [1] */ - FN_DU1_DB7, FN_SDA2_D, - /* IP5_7 [1] */ - FN_DU1_DB6, FN_SCL2_D, - /* IP5_6 [1] */ - FN_DU1_DB5, FN_VI2_R7, - /* IP5_5 [1] */ - FN_DU1_DB4, FN_VI2_R6, - /* IP5_4 [1] */ - FN_DU1_DB3, FN_VI2_R5, - /* IP5_3 [1] */ - FN_DU1_DB2, FN_VI2_R4, - /* IP5_2_0 [3] */ - FN_DU1_DB1, FN_VI2_DATA5_VI2_B5, FN_SDA2_B, FN_SD3_DAT1, - FN_RX5, FN_RTS0_D_TANS_D, 0, 0 } - }, - { PINMUX_CFG_REG_VAR("IPSR6", 0xfffc0038, 32, - 1, 2, 2, 2, 2, 3, 2, 3, 3, 3, 1, 2, 2, 2, 2) { - /* IP6_31 [1] */ - 0, 0, - /* IP6_30_29 [2] */ - FN_SSI_SCK6, FN_ADICHS0, FN_CAN0_TX, FN_IERX_B, - /* IP_28_27 [2] */ - 0, 0, 0, 0, - /* IP6_26_25 [2] */ - FN_SSI_SDATA5, FN_ADIDATA, FN_CAN_DEBUGOUT12, FN_RX3_IRDA_RX, - /* IP6_24_23 [2] */ - FN_SSI_WS5, FN_ADICS_SAMP, FN_CAN_DEBUGOUT11, FN_TX3_IRDA_TX, - /* IP6_22_20 [3] */ - FN_SSI_SCK5, FN_ADICLK, FN_CAN_DEBUGOUT10, FN_SCK3, - FN_TCLK0_D, 0, 0, 0, - /* IP6_19_18 [2] */ - FN_SSI_SDATA4, FN_CAN_DEBUGOUT9, FN_SSI_SDATA9_C, 0, - /* IP6_17_15 [3] */ - FN_SSI_SDATA3, FN_PWM0_C, FN_CAN_DEBUGOUT8, FN_CAN_CLK_B, - FN_IECLK, FN_SCIF_CLK_B, FN_TCLK0_B, 0, - /* IP6_14_12 [3] */ - FN_SSI_WS34, FN_CAN_DEBUGOUT7, FN_CAN0_RX_B, FN_IETX, - FN_SSI_WS9_C, 0, 0, 0, - /* IP6_11_9 [3] */ - FN_SSI_SCK34, FN_CAN_DEBUGOUT6, FN_CAN0_TX_B, FN_IERX, - FN_SSI_SCK9_C, 0, 0, 0, - /* IP6_8 [1] */ - FN_SSI_SDATA2, FN_CAN_DEBUGOUT5, - /* IP6_7_6 [2] */ - FN_SSI_SDATA1, FN_CAN_DEBUGOUT4, FN_MOUT6, 0, - /* IP6_5_4 [2] */ - FN_SSI_SDATA0, FN_CAN_DEBUGOUT3, FN_MOUT5, 0, - /* IP6_3_2 [2] */ - FN_SSI_WS0129, FN_CAN_DEBUGOUT2, FN_MOUT2, 0, - /* IP6_1_0 [2] */ - FN_SSI_SCK0129, FN_CAN_DEBUGOUT1, FN_MOUT1, 0 } - }, - { PINMUX_CFG_REG_VAR("IPSR7", 0xfffc003c, 32, - 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 2, 2) { - /* IP7_31 [1] */ - 0, 0, - /* IP7_30_29 [2] */ - FN_SD0_WP, FN_DACK2, FN_CTS1_B, 0, - /* IP7_28_27 [2] */ - FN_SD0_CD, FN_DREQ2, FN_RTS1_B_TANS_B, 0, - /* IP7_26_25 [2] */ - FN_SD0_DAT3, FN_ATAWR1, FN_RX2_B, FN_CC5_TDI, - /* IP7_24_23 [2] */ - FN_SD0_DAT2, FN_ATARD1, FN_TX2_B, FN_CC5_TCK, - /* IP7_22_21 [2] */ - FN_SD0_DAT1, FN_ATAG1, FN_SCK2_B, FN_CC5_TMS, - /* IP7_20_19 [2] */ - FN_SD0_DAT0, FN_ATADIR1, FN_RX1_B, FN_CC5_TRST, - /* IP7_18_17 [2] */ - FN_SD0_CMD, FN_ATACS11, FN_TX1_B, FN_CC5_TDO, - /* IP7_16_15 [2] */ - FN_SD0_CLK, FN_ATACS01, FN_SCK1_B, 0, - /* IP7_14_13 [2] */ - FN_SSI_SDATA8, FN_VSP, FN_IRQ3_B, FN_HSPI_RX1_C, - /* IP7_12_10 [3] */ - FN_SSI_SDATA7, FN_CAN_DEBUGOUT15, FN_IRQ2_B, FN_TCLK1_C, - FN_HSPI_TX1_C, 0, 0, 0, - /* IP7_9_7 [3] */ - FN_SSI_WS78, FN_CAN_DEBUGOUT14, FN_IRQ1_B, FN_SSI_WS9_B, - FN_HSPI_CS1_C, 0, 0, 0, - /* IP7_6_4 [3] */ - FN_SSI_SCK78, FN_CAN_DEBUGOUT13, FN_IRQ0_B, FN_SSI_SCK9_B, - FN_HSPI_CLK1_C, 0, 0, 0, - /* IP7_3_2 [2] */ - FN_SSI_SDATA6, FN_ADICHS2, FN_CAN_CLK, FN_IECLK_B, - /* IP7_1_0 [2] */ - FN_SSI_WS6, FN_ADICHS1, FN_CAN0_RX, FN_IETX_B } - }, - { PINMUX_CFG_REG_VAR("IPSR8", 0xfffc0040, 32, - 1, 3, 3, 2, 2, 1, 1, 1, 2, 4, 4, 4, 4) { - /* IP8_31 [1] */ - 0, 0, - /* IP8_30_28 [3] */ - FN_VI0_VSYNC, FN_VI0_DATA1_B_VI0_B1_B, FN_RTS1_C_TANS_C, FN_RX4_D, - FN_PWMFSW0_C, 0, 0, 0, - /* IP8_27_25 [3] */ - FN_VI0_HSYNC, FN_VI0_DATA0_B_VI0_B0_B, FN_CTS1_C, FN_TX4_D, - FN_MMC1_CMD, FN_HSCK1_B, 0, 0, - /* IP8_24_23 [2] */ - FN_VI0_FIELD, FN_RX1_C, FN_HRX1_B, 0, - /* IP8_22_21 [2] */ - FN_VI0_CLKENB, FN_TX1_C, FN_HTX1_B, FN_MT1_SYNC, - /* IP8_20 [1] */ - FN_VI0_CLK, FN_MMC1_CLK, - /* IP8_19 [1] */ - FN_FMIN, FN_RDS_DATA, - /* IP8_18 [1] */ - FN_BPFCLK, FN_PCMWE, - /* IP8_17_16 [2] */ - FN_FMCLK, FN_RDS_CLK, FN_PCMOE, 0, - /* IP8_15_12 [4] */ - FN_HSPI_RX0, FN_RX0, FN_CAN_STEP0, FN_AD_NCS, - FN_CC5_STATE7, FN_CC5_STATE15, FN_CC5_STATE23, FN_CC5_STATE31, - FN_CC5_STATE39, 0, 0, 0, - 0, 0, 0, 0, - /* IP8_11_8 [4] */ - FN_HSPI_TX0, FN_TX0, FN_CAN_DEBUG_HW_TRIGGER, FN_AD_DO, - FN_CC5_STATE6, FN_CC5_STATE14, FN_CC5_STATE22, FN_CC5_STATE30, - FN_CC5_STATE38, 0, 0, 0, - 0, 0, 0, 0, - /* IP8_7_4 [4] */ - FN_HSPI_CS0, FN_RTS0_TANS, FN_USB_OVC1, FN_AD_DI, - FN_CC5_STATE5, FN_CC5_STATE13, FN_CC5_STATE21, FN_CC5_STATE29, - FN_CC5_STATE37, 0, 0, 0, - 0, 0, 0, 0, - /* IP8_3_0 [4] */ - FN_HSPI_CLK0, FN_CTS0, FN_USB_OVC0, FN_AD_CLK, - FN_CC5_STATE4, FN_CC5_STATE12, FN_CC5_STATE20, FN_CC5_STATE28, - FN_CC5_STATE36, 0, 0, 0, - 0, 0, 0, 0 } - }, - { PINMUX_CFG_REG_VAR("IPSR9", 0xfffc0044, 32, - 2, 2, 2, 2, 2, 3, 3, 2, 2, - 2, 2, 1, 1, 1, 1, 2, 2) { - /* IP9_31_30 [2] */ - 0, 0, 0, 0, - /* IP9_29_28 [2] */ - FN_VI0_G7, FN_ETH_RXD1, FN_SD2_DAT3_B, FN_ARM_TRACEDATA_9, - /* IP9_27_26 [2] */ - FN_VI0_G6, FN_ETH_RXD0, FN_SD2_DAT2_B, FN_ARM_TRACEDATA_8, - /* IP9_25_24 [2] */ - FN_VI0_G5, FN_ETH_RX_ER, FN_SD2_DAT1_B, FN_ARM_TRACEDATA_7, - /* IP9_23_22 [2] */ - FN_VI0_G4, FN_ETH_TX_EN, FN_SD2_DAT0_B, FN_ARM_TRACEDATA_6, - /* IP9_21_19 [3] */ - FN_VI0_G3, FN_ETH_CRS_DV, FN_MMC1_D7, FN_ARM_TRACEDATA_5, - FN_TS_SDAT0, 0, 0, 0, - /* IP9_18_16 [3] */ - FN_VI0_G2, FN_ETH_TXD1, FN_MMC1_D6, FN_ARM_TRACEDATA_4, - FN_TS_SPSYNC0, 0, 0, 0, - /* IP9_15_14 [2] */ - FN_VI0_G1, FN_SSI_WS78_C, FN_IRQ1, FN_ARM_TRACEDATA_3, - /* IP9_13_12 [2] */ - FN_VI0_G0, FN_SSI_SCK78_C, FN_IRQ0, FN_ARM_TRACEDATA_2, - /* IP9_11_10 [2] */ - FN_VI0_DATA7_VI0_B7, FN_MMC1_D5, FN_ARM_TRACEDATA_1, 0, - /* IP9_9_8 [2] */ - FN_VI0_DATA6_VI0_B6, FN_MMC1_D4, FN_ARM_TRACEDATA_0, 0, - /* IP9_7 [1] */ - FN_VI0_DATA5_VI0_B5, FN_MMC1_D3, - /* IP9_6 [1] */ - FN_VI0_DATA4_VI0_B4, FN_MMC1_D2, - /* IP9_5 [1] */ - FN_VI0_DATA3_VI0_B3, FN_MMC1_D1, - /* IP9_4 [1] */ - FN_VI0_DATA2_VI0_B2, FN_MMC1_D0, - /* IP9_3_2 [2] */ - FN_VI0_DATA1_VI0_B1, FN_HCTS1_B, FN_MT1_PWM, 0, - /* IP9_1_0 [2] */ - FN_VI0_DATA0_VI0_B0, FN_HRTS1_B, FN_MT1_VCXO, 0 } - }, - { PINMUX_CFG_REG_VAR("IPSR10", 0xfffc0048, 32, - 3, 3, 2, 3, 3, 3, 3, 3, 3, 3, 3) { - /* IP10_31_29 [3] */ - FN_VI1_VSYNC, FN_AUDIO_CLKOUT_C, FN_SSI_WS4, FN_SIM_CLK, - FN_GPS_MAG_C, FN_SPV_TRST, FN_SCL3, 0, - /* IP10_28_26 [3] */ - FN_VI1_HSYNC, FN_VI3_CLK, FN_SSI_SCK4, FN_GPS_SIGN_C, - FN_PWMFSW0_E, 0, 0, 0, - /* IP10_25_24 [2] */ - FN_VI1_CLK, FN_SIM_D, FN_SDA3, 0, - /* IP10_23_21 [3] */ - FN_VI0_R7, FN_ETH_MDIO, FN_DACK2_C, FN_HSPI_RX1_B, - FN_SCIF_CLK_D, FN_TRACECTL, FN_MT1_PEN, 0, - /* IP10_20_18 [3] */ - FN_VI0_R6, FN_ETH_MDC, FN_DREQ2_C, FN_HSPI_TX1_B, - FN_TRACECLK, FN_MT1_BEN, FN_PWMFSW0_D, 0, - /* IP10_17_15 [3] */ - FN_VI0_R5, FN_ETH_TXD0, FN_SD2_WP_B, FN_HSPI_CS1_B, - FN_ARM_TRACEDATA_15, FN_MT1_D, FN_TS_SDEN0, 0, - /* IP10_14_12 [3] */ - FN_VI0_R4, FN_ETH_REFCLK, FN_SD2_CD_B, FN_HSPI_CLK1_B, - FN_ARM_TRACEDATA_14, FN_MT1_CLK, FN_TS_SCK0, 0, - /* IP10_11_9 [3] */ - FN_VI0_R3, FN_ETH_MAGIC, FN_SD2_CMD_B, FN_IRQ3, - FN_ARM_TRACEDATA_13, 0, 0, 0, - /* IP10_8_6 [3] */ - FN_VI0_R2, FN_ETH_LINK, FN_SD2_CLK_B, FN_IRQ2, - FN_ARM_TRACEDATA_12, 0, 0, 0, - /* IP10_5_3 [3] */ - FN_VI0_R1, FN_SSI_SDATA8_C, FN_DACK1_B, FN_ARM_TRACEDATA_11, - FN_DACK0_C, FN_DRACK0_C, 0, 0, - /* IP10_2_0 [3] */ - FN_VI0_R0, FN_SSI_SDATA7_C, FN_SCK1_C, FN_DREQ1_B, - FN_ARM_TRACEDATA_10, FN_DREQ0_C, 0, 0 } - }, - { PINMUX_CFG_REG_VAR("IPSR11", 0xfffc004c, 32, - 2, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3) { - /* IP11_31_30 [2] */ - 0, 0, 0, 0, - /* IP11_29_27 [3] */ - FN_VI1_G1, FN_VI3_DATA1, FN_SSI_SCK1, FN_TS_SDEN1, - FN_DACK2_B, FN_RX2, FN_HRTS0_B, 0, - /* IP11_26_24 [3] */ - FN_VI1_G0, FN_VI3_DATA0, FN_DU1_DOTCLKOUT1, FN_TS_SCK1, - FN_DREQ2_B, FN_TX2, FN_SPA_TDO, FN_HCTS0_B, - /* IP11_23_21 [3] */ - FN_VI1_DATA7_VI1_B7, FN_SD2_WP, FN_MT0_PWM, FN_SPA_TDI, - FN_HSPI_RX1_D, 0, 0, 0, - /* IP11_20_18 [3] */ - FN_VI1_DATA6_VI1_B6, FN_SD2_CD, FN_MT0_VCXO, FN_SPA_TMS, - FN_HSPI_TX1_D, 0, 0, 0, - /* IP11_17_15 [3] */ - FN_VI1_DATA5_VI1_B5, FN_SD2_CMD, FN_MT0_SYNC, FN_SPA_TCK, - FN_HSPI_CS1_D, FN_ADICHS2_B, 0, 0, - /* IP11_14_12 [3] */ - FN_VI1_DATA4_VI1_B4, FN_SD2_CLK, FN_MT0_PEN, FN_SPA_TRST, - FN_HSPI_CLK1_D, FN_ADICHS1_B, 0, 0, - /* IP11_11_9 [3] */ - FN_VI1_DATA3_VI1_B3, FN_SD2_DAT3, FN_MT0_BEN, FN_SPV_TDO, - FN_ADICHS0_B, 0, 0, 0, - /* IP11_8_6 [3] */ - FN_VI1_DATA2_VI1_B2, FN_SD2_DAT2, FN_MT0_D, FN_SPVTDI, - FN_ADIDATA_B, 0, 0, 0, - /* IP11_5_3 [3] */ - FN_VI1_DATA1_VI1_B1, FN_SD2_DAT1, FN_MT0_CLK, FN_SPV_TMS, - FN_ADICS_B_SAMP_B, 0, 0, 0, - /* IP11_2_0 [3] */ - FN_VI1_DATA0_VI1_B0, FN_SD2_DAT0, FN_SIM_RST, FN_SPV_TCK, - FN_ADICLK_B, 0, 0, 0 } - }, - { PINMUX_CFG_REG_VAR("IPSR12", 0xfffc0050, 32, - 4, 4, 4, 2, 3, 3, 3, 3, 3, 3) { - /* IP12_31_28 [4] */ - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - /* IP12_27_24 [4] */ - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - /* IP12_23_20 [4] */ - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - /* IP12_19_18 [2] */ - 0, 0, 0, 0, - /* IP12_17_15 [3] */ - FN_VI1_G7, FN_VI3_DATA7, FN_GPS_MAG, FN_FCE, - FN_SCK4_B, 0, 0, 0, - /* IP12_14_12 [3] */ - FN_VI1_G6, FN_VI3_DATA6, FN_GPS_SIGN, FN_FRB, - FN_RX4_B, FN_SIM_CLK_B, 0, 0, - /* IP12_11_9 [3] */ - FN_VI1_G5, FN_VI3_DATA5, FN_GPS_CLK, FN_FSE, - FN_TX4_B, FN_SIM_D_B, 0, 0, - /* IP12_8_6 [3] */ - FN_VI1_G4, FN_VI3_DATA4, FN_SSI_WS2, FN_SDA1_C, - FN_SIM_RST_B, FN_HRX0_B, 0, 0, - /* IP12_5_3 [3] */ - FN_VI1_G3, FN_VI3_DATA3, FN_SSI_SCK2, FN_TS_SDAT1, - FN_SCL1_C, FN_HTX0_B, 0, 0, - /* IP12_2_0 [3] */ - FN_VI1_G2, FN_VI3_DATA2, FN_SSI_WS1, FN_TS_SPSYNC1, - FN_SCK2, FN_HSCK0_B, 0, 0 } - }, - { PINMUX_CFG_REG_VAR("MOD_SEL", 0xfffc0090, 32, - 2, 2, 3, 3, 2, 2, 2, 2, 2, - 1, 1, 1, 1, 1, 1, 1, 2, 1, 2) { - /* SEL_SCIF5 [2] */ - FN_SEL_SCIF5_0, FN_SEL_SCIF5_1, FN_SEL_SCIF5_2, FN_SEL_SCIF5_3, - /* SEL_SCIF4 [2] */ - FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2, FN_SEL_SCIF4_3, - /* SEL_SCIF3 [3] */ - FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3, - FN_SEL_SCIF3_4, 0, 0, 0, - /* SEL_SCIF2 [3] */ - FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2, FN_SEL_SCIF2_3, - FN_SEL_SCIF2_4, 0, 0, 0, - /* SEL_SCIF1 [2] */ - FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, 0, - /* SEL_SCIF0 [2] */ - FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2, FN_SEL_SCIF0_3, - /* SEL_SSI9 [2] */ - FN_SEL_SSI9_0, FN_SEL_SSI9_1, FN_SEL_SSI9_2, 0, - /* SEL_SSI8 [2] */ - FN_SEL_SSI8_0, FN_SEL_SSI8_1, FN_SEL_SSI8_2, 0, - /* SEL_SSI7 [2] */ - FN_SEL_SSI7_0, FN_SEL_SSI7_1, FN_SEL_SSI7_2, 0, - /* SEL_VI0 [1] */ - FN_SEL_VI0_0, FN_SEL_VI0_1, - /* SEL_SD2 [1] */ - FN_SEL_SD2_0, FN_SEL_SD2_1, - /* SEL_INT3 [1] */ - FN_SEL_INT3_0, FN_SEL_INT3_1, - /* SEL_INT2 [1] */ - FN_SEL_INT2_0, FN_SEL_INT2_1, - /* SEL_INT1 [1] */ - FN_SEL_INT1_0, FN_SEL_INT1_1, - /* SEL_INT0 [1] */ - FN_SEL_INT0_0, FN_SEL_INT0_1, - /* SEL_IE [1] */ - FN_SEL_IE_0, FN_SEL_IE_1, - /* SEL_EXBUS2 [2] */ - FN_SEL_EXBUS2_0, FN_SEL_EXBUS2_1, FN_SEL_EXBUS2_2, 0, - /* SEL_EXBUS1 [1] */ - FN_SEL_EXBUS1_0, FN_SEL_EXBUS1_1, - /* SEL_EXBUS0 [2] */ - FN_SEL_EXBUS0_0, FN_SEL_EXBUS0_1, FN_SEL_EXBUS0_2, 0 } - }, - { PINMUX_CFG_REG_VAR("MOD_SEL2", 0xfffc0094, 32, - 2, 2, 2, 2, 1, 1, 1, 3, 1, - 2, 2, 2, 2, 1, 1, 2, 1, 2, 2) { - /* SEL_TMU1 [2] */ - FN_SEL_TMU1_0, FN_SEL_TMU1_1, FN_SEL_TMU1_2, 0, - /* SEL_TMU0 [2] */ - FN_SEL_TMU0_0, FN_SEL_TMU0_1, FN_SEL_TMU0_2, FN_SEL_TMU0_3, - /* SEL_SCIF [2] */ - FN_SEL_SCIF_0, FN_SEL_SCIF_1, FN_SEL_SCIF_2, FN_SEL_SCIF_3, - /* SEL_CANCLK [2] */ - FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, FN_SEL_CANCLK_2, - /* SEL_CAN0 [1] */ - FN_SEL_CAN0_0, FN_SEL_CAN0_1, - /* SEL_HSCIF1 [1] */ - FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1, - /* SEL_HSCIF0 [1] */ - FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1, - /* SEL_PWMFSW [3] */ - FN_SEL_PWMFSW_0, FN_SEL_PWMFSW_1, FN_SEL_PWMFSW_2, - FN_SEL_PWMFSW_3, FN_SEL_PWMFSW_4, 0, 0, 0, - /* SEL_ADI [1] */ - FN_SEL_ADI_0, FN_SEL_ADI_1, - /* [2] */ - 0, 0, 0, 0, - /* [2] */ - 0, 0, 0, 0, - /* [2] */ - 0, 0, 0, 0, - /* SEL_GPS [2] */ - FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, FN_SEL_GPS_3, - /* SEL_SIM [1] */ - FN_SEL_SIM_0, FN_SEL_SIM_1, - /* SEL_HSPI2 [1] */ - FN_SEL_HSPI2_0, FN_SEL_HSPI2_1, - /* SEL_HSPI1 [2] */ - FN_SEL_HSPI1_0, FN_SEL_HSPI1_1, FN_SEL_HSPI1_2, FN_SEL_HSPI1_3, - /* SEL_I2C3 [1] */ - FN_SEL_I2C3_0, FN_SEL_I2C3_1, - /* SEL_I2C2 [2] */ - FN_SEL_I2C2_0, FN_SEL_I2C2_1, FN_SEL_I2C2_2, FN_SEL_I2C2_3, - /* SEL_I2C1 [2] */ - FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2, FN_SEL_I2C1_3 } - }, - { PINMUX_CFG_REG("INOUTSEL0", 0xffc40004, 32, 1) { GP_INOUTSEL(0) } }, - { PINMUX_CFG_REG("INOUTSEL1", 0xffc41004, 32, 1) { GP_INOUTSEL(1) } }, - { PINMUX_CFG_REG("INOUTSEL2", 0xffc42004, 32, 1) { GP_INOUTSEL(2) } }, - { PINMUX_CFG_REG("INOUTSEL3", 0xffc43004, 32, 1) { GP_INOUTSEL(3) } }, - { PINMUX_CFG_REG("INOUTSEL4", 0xffc44004, 32, 1) { GP_INOUTSEL(4) } }, - { PINMUX_CFG_REG("INOUTSEL5", 0xffc45004, 32, 1) { GP_INOUTSEL(5) } }, - { PINMUX_CFG_REG("INOUTSEL6", 0xffc46004, 32, 1) { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, - 0, 0, - 0, 0, - GP_6_8_IN, GP_6_8_OUT, - GP_6_7_IN, GP_6_7_OUT, - GP_6_6_IN, GP_6_6_OUT, - GP_6_5_IN, GP_6_5_OUT, - GP_6_4_IN, GP_6_4_OUT, - GP_6_3_IN, GP_6_3_OUT, - GP_6_2_IN, GP_6_2_OUT, - GP_6_1_IN, GP_6_1_OUT, - GP_6_0_IN, GP_6_0_OUT, } - }, - { }, -}; - -static struct pinmux_data_reg pinmux_data_regs[] = { - { PINMUX_DATA_REG("INDT0", 0xffc40008, 32) { GP_INDT(0) } }, - { PINMUX_DATA_REG("INDT1", 0xffc41008, 32) { GP_INDT(1) } }, - { PINMUX_DATA_REG("INDT2", 0xffc42008, 32) { GP_INDT(2) } }, - { PINMUX_DATA_REG("INDT3", 0xffc43008, 32) { GP_INDT(3) } }, - { PINMUX_DATA_REG("INDT4", 0xffc44008, 32) { GP_INDT(4) } }, - { PINMUX_DATA_REG("INDT5", 0xffc45008, 32) { GP_INDT(5) } }, - { PINMUX_DATA_REG("INDT6", 0xffc46008, 32) { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, GP_6_8_DATA, - GP_6_7_DATA, GP_6_6_DATA, GP_6_5_DATA, GP_6_4_DATA, - GP_6_3_DATA, GP_6_2_DATA, GP_6_1_DATA, GP_6_0_DATA } - }, - { }, -}; - -static struct resource r8a7779_pfc_resources[] = { - [0] = { - .start = 0xfffc0000, - .end = 0xfffc023b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0xffc40000, - .end = 0xffc46fff, - .flags = IORESOURCE_MEM, - } -}; - -static struct pinmux_info r8a7779_pinmux_info = { - .name = "r8a7779_pfc", - - .resource = r8a7779_pfc_resources, - .num_resources = ARRAY_SIZE(r8a7779_pfc_resources), - - .unlock_reg = 0xfffc0000, /* PMMR */ - - .reserved_id = PINMUX_RESERVED, - .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, - .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, - .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, - - .first_gpio = GPIO_GP_0_0, - .last_gpio = GPIO_FN_SCK4_B, - - .gpios = pinmux_gpios, - .cfg_regs = pinmux_config_regs, - .data_regs = pinmux_data_regs, - - .gpio_data = pinmux_data, - .gpio_data_size = ARRAY_SIZE(pinmux_data), -}; - -void r8a7779_pinmux_init(void) -{ - register_pinmux(&r8a7779_pinmux_info); -} diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c deleted file mode 100644 index 7a1525f..0000000 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ /dev/null @@ -1,1663 +0,0 @@ -/* - * sh7372 processor support - PFC hardware block - * - * Copyright (C) 2010 Kuninori Morimoto <morimoto.kuninori@renesas.com> - * - * Based on - * sh7367 processor support - PFC hardware block - * Copyright (C) 2010 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sh_pfc.h> -#include <mach/irqs.h> -#include <mach/sh7372.h> - -#define CPU_ALL_PORT(fn, pfx, sfx) \ - PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \ - PORT_10(fn, pfx##10, sfx), PORT_10(fn, pfx##11, sfx), \ - PORT_10(fn, pfx##12, sfx), PORT_10(fn, pfx##13, sfx), \ - PORT_10(fn, pfx##14, sfx), PORT_10(fn, pfx##15, sfx), \ - PORT_10(fn, pfx##16, sfx), PORT_10(fn, pfx##17, sfx), \ - PORT_10(fn, pfx##18, sfx), PORT_1(fn, pfx##190, sfx) - -enum { - PINMUX_RESERVED = 0, - - /* PORT0_DATA -> PORT190_DATA */ - PINMUX_DATA_BEGIN, - PORT_ALL(DATA), - PINMUX_DATA_END, - - /* PORT0_IN -> PORT190_IN */ - PINMUX_INPUT_BEGIN, - PORT_ALL(IN), - PINMUX_INPUT_END, - - /* PORT0_IN_PU -> PORT190_IN_PU */ - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), - PINMUX_INPUT_PULLUP_END, - - /* PORT0_IN_PD -> PORT190_IN_PD */ - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), - PINMUX_INPUT_PULLDOWN_END, - - /* PORT0_OUT -> PORT190_OUT */ - PINMUX_OUTPUT_BEGIN, - PORT_ALL(OUT), - PINMUX_OUTPUT_END, - - PINMUX_FUNCTION_BEGIN, - PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT190_FN_IN */ - PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT190_FN_OUT */ - PORT_ALL(FN0), /* PORT0_FN0 -> PORT190_FN0 */ - PORT_ALL(FN1), /* PORT0_FN1 -> PORT190_FN1 */ - PORT_ALL(FN2), /* PORT0_FN2 -> PORT190_FN2 */ - PORT_ALL(FN3), /* PORT0_FN3 -> PORT190_FN3 */ - PORT_ALL(FN4), /* PORT0_FN4 -> PORT190_FN4 */ - PORT_ALL(FN5), /* PORT0_FN5 -> PORT190_FN5 */ - PORT_ALL(FN6), /* PORT0_FN6 -> PORT190_FN6 */ - PORT_ALL(FN7), /* PORT0_FN7 -> PORT190_FN7 */ - - MSEL1CR_31_0, MSEL1CR_31_1, - MSEL1CR_30_0, MSEL1CR_30_1, - MSEL1CR_29_0, MSEL1CR_29_1, - MSEL1CR_28_0, MSEL1CR_28_1, - MSEL1CR_27_0, MSEL1CR_27_1, - MSEL1CR_26_0, MSEL1CR_26_1, - MSEL1CR_16_0, MSEL1CR_16_1, - MSEL1CR_15_0, MSEL1CR_15_1, - MSEL1CR_14_0, MSEL1CR_14_1, - MSEL1CR_13_0, MSEL1CR_13_1, - MSEL1CR_12_0, MSEL1CR_12_1, - MSEL1CR_9_0, MSEL1CR_9_1, - MSEL1CR_8_0, MSEL1CR_8_1, - MSEL1CR_7_0, MSEL1CR_7_1, - MSEL1CR_6_0, MSEL1CR_6_1, - MSEL1CR_4_0, MSEL1CR_4_1, - MSEL1CR_3_0, MSEL1CR_3_1, - MSEL1CR_2_0, MSEL1CR_2_1, - MSEL1CR_0_0, MSEL1CR_0_1, - - MSEL3CR_27_0, MSEL3CR_27_1, - MSEL3CR_26_0, MSEL3CR_26_1, - MSEL3CR_21_0, MSEL3CR_21_1, - MSEL3CR_20_0, MSEL3CR_20_1, - MSEL3CR_15_0, MSEL3CR_15_1, - MSEL3CR_9_0, MSEL3CR_9_1, - MSEL3CR_6_0, MSEL3CR_6_1, - - MSEL4CR_19_0, MSEL4CR_19_1, - MSEL4CR_18_0, MSEL4CR_18_1, - MSEL4CR_17_0, MSEL4CR_17_1, - MSEL4CR_16_0, MSEL4CR_16_1, - MSEL4CR_15_0, MSEL4CR_15_1, - MSEL4CR_14_0, MSEL4CR_14_1, - MSEL4CR_10_0, MSEL4CR_10_1, - MSEL4CR_6_0, MSEL4CR_6_1, - MSEL4CR_4_0, MSEL4CR_4_1, - MSEL4CR_1_0, MSEL4CR_1_1, - PINMUX_FUNCTION_END, - - PINMUX_MARK_BEGIN, - - /* IRQ */ - IRQ0_6_MARK, IRQ0_162_MARK, IRQ1_MARK, IRQ2_4_MARK, - IRQ2_5_MARK, IRQ3_8_MARK, IRQ3_16_MARK, IRQ4_17_MARK, - IRQ4_163_MARK, IRQ5_MARK, IRQ6_39_MARK, IRQ6_164_MARK, - IRQ7_40_MARK, IRQ7_167_MARK, IRQ8_41_MARK, IRQ8_168_MARK, - IRQ9_42_MARK, IRQ9_169_MARK, IRQ10_MARK, IRQ11_MARK, - IRQ12_80_MARK, IRQ12_137_MARK, IRQ13_81_MARK, IRQ13_145_MARK, - IRQ14_82_MARK, IRQ14_146_MARK, IRQ15_83_MARK, IRQ15_147_MARK, - IRQ16_84_MARK, IRQ16_170_MARK, IRQ17_MARK, IRQ18_MARK, - IRQ19_MARK, IRQ20_MARK, IRQ21_MARK, IRQ22_MARK, - IRQ23_MARK, IRQ24_MARK, IRQ25_MARK, IRQ26_121_MARK, - IRQ26_172_MARK, IRQ27_122_MARK, IRQ27_180_MARK, IRQ28_123_MARK, - IRQ28_181_MARK, IRQ29_129_MARK, IRQ29_182_MARK, IRQ30_130_MARK, - IRQ30_183_MARK, IRQ31_138_MARK, IRQ31_184_MARK, - - /* MSIOF0 */ - MSIOF0_TSYNC_MARK, MSIOF0_TSCK_MARK, MSIOF0_RXD_MARK, - MSIOF0_RSCK_MARK, MSIOF0_RSYNC_MARK, MSIOF0_MCK0_MARK, - MSIOF0_MCK1_MARK, MSIOF0_SS1_MARK, MSIOF0_SS2_MARK, - MSIOF0_TXD_MARK, - - /* MSIOF1 */ - MSIOF1_TSCK_39_MARK, MSIOF1_TSYNC_40_MARK, - MSIOF1_TSCK_88_MARK, MSIOF1_TSYNC_89_MARK, - MSIOF1_TXD_41_MARK, MSIOF1_RXD_42_MARK, - MSIOF1_TXD_90_MARK, MSIOF1_RXD_91_MARK, - MSIOF1_SS1_43_MARK, MSIOF1_SS2_44_MARK, - MSIOF1_SS1_92_MARK, MSIOF1_SS2_93_MARK, - MSIOF1_RSCK_MARK, MSIOF1_RSYNC_MARK, - MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK, - - /* MSIOF2 */ - MSIOF2_RSCK_MARK, MSIOF2_RSYNC_MARK, MSIOF2_MCK0_MARK, - MSIOF2_MCK1_MARK, MSIOF2_SS1_MARK, MSIOF2_SS2_MARK, - MSIOF2_TSYNC_MARK, MSIOF2_TSCK_MARK, MSIOF2_RXD_MARK, - MSIOF2_TXD_MARK, - - /* BBIF1 */ - BBIF1_RXD_MARK, BBIF1_TSYNC_MARK, BBIF1_TSCK_MARK, - BBIF1_TXD_MARK, BBIF1_RSCK_MARK, BBIF1_RSYNC_MARK, - BBIF1_FLOW_MARK, BB_RX_FLOW_N_MARK, - - /* BBIF2 */ - BBIF2_TSCK1_MARK, BBIF2_TSYNC1_MARK, - BBIF2_TXD1_MARK, BBIF2_RXD_MARK, - - /* FSI */ - FSIACK_MARK, FSIBCK_MARK, FSIAILR_MARK, FSIAIBT_MARK, - FSIAISLD_MARK, FSIAOMC_MARK, FSIAOLR_MARK, FSIAOBT_MARK, - FSIAOSLD_MARK, FSIASPDIF_11_MARK, FSIASPDIF_15_MARK, - - /* FMSI */ - FMSOCK_MARK, FMSOOLR_MARK, FMSIOLR_MARK, FMSOOBT_MARK, - FMSIOBT_MARK, FMSOSLD_MARK, FMSOILR_MARK, FMSIILR_MARK, - FMSOIBT_MARK, FMSIIBT_MARK, FMSISLD_MARK, FMSICK_MARK, - - /* SCIFA0 */ - SCIFA0_TXD_MARK, SCIFA0_RXD_MARK, SCIFA0_SCK_MARK, - SCIFA0_RTS_MARK, SCIFA0_CTS_MARK, - - /* SCIFA1 */ - SCIFA1_TXD_MARK, SCIFA1_RXD_MARK, SCIFA1_SCK_MARK, - SCIFA1_RTS_MARK, SCIFA1_CTS_MARK, - - /* SCIFA2 */ - SCIFA2_CTS1_MARK, SCIFA2_RTS1_MARK, SCIFA2_TXD1_MARK, - SCIFA2_RXD1_MARK, SCIFA2_SCK1_MARK, - - /* SCIFA3 */ - SCIFA3_CTS_43_MARK, SCIFA3_CTS_140_MARK, SCIFA3_RTS_44_MARK, - SCIFA3_RTS_141_MARK, SCIFA3_SCK_MARK, SCIFA3_TXD_MARK, - SCIFA3_RXD_MARK, - - /* SCIFA4 */ - SCIFA4_RXD_MARK, SCIFA4_TXD_MARK, - - /* SCIFA5 */ - SCIFA5_RXD_MARK, SCIFA5_TXD_MARK, - - /* SCIFB */ - SCIFB_SCK_MARK, SCIFB_RTS_MARK, SCIFB_CTS_MARK, - SCIFB_TXD_MARK, SCIFB_RXD_MARK, - - /* CEU */ - VIO_HD_MARK, VIO_CKO1_MARK, VIO_CKO2_MARK, VIO_VD_MARK, - VIO_CLK_MARK, VIO_FIELD_MARK, VIO_CKO_MARK, - VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK, VIO_D3_MARK, - VIO_D4_MARK, VIO_D5_MARK, VIO_D6_MARK, VIO_D7_MARK, - VIO_D8_MARK, VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK, - VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK, VIO_D15_MARK, - - /* USB0 */ - IDIN_0_MARK, EXTLP_0_MARK, OVCN2_0_MARK, PWEN_0_MARK, - OVCN_0_MARK, VBUS0_0_MARK, - - /* USB1 */ - IDIN_1_18_MARK, IDIN_1_113_MARK, - PWEN_1_115_MARK, PWEN_1_138_MARK, - OVCN_1_114_MARK, OVCN_1_162_MARK, - EXTLP_1_MARK, OVCN2_1_MARK, - VBUS0_1_MARK, - - /* GPIO */ - GPI0_MARK, GPI1_MARK, GPO0_MARK, GPO1_MARK, - - /* BSC */ - BS_MARK, WE1_MARK, - CKO_MARK, WAIT_MARK, RDWR_MARK, - - A0_MARK, A1_MARK, A2_MARK, A3_MARK, - A6_MARK, A7_MARK, A8_MARK, A9_MARK, - A10_MARK, A11_MARK, A12_MARK, A13_MARK, - A14_MARK, A15_MARK, A16_MARK, A17_MARK, - A18_MARK, A19_MARK, A20_MARK, A21_MARK, - A22_MARK, A23_MARK, A24_MARK, A25_MARK, - A26_MARK, - - CS0_MARK, CS2_MARK, CS4_MARK, - CS5A_MARK, CS5B_MARK, CS6A_MARK, - - /* BSC/FLCTL */ - RD_FSC_MARK, WE0_FWE_MARK, A4_FOE_MARK, A5_FCDE_MARK, - D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, D3_NAF3_MARK, - D4_NAF4_MARK, D5_NAF5_MARK, D6_NAF6_MARK, D7_NAF7_MARK, - D8_NAF8_MARK, D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK, - D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, D15_NAF15_MARK, - - /* MMCIF(1) */ - MMCD0_0_MARK, MMCD0_1_MARK, MMCD0_2_MARK, MMCD0_3_MARK, - MMCD0_4_MARK, MMCD0_5_MARK, MMCD0_6_MARK, MMCD0_7_MARK, - MMCCMD0_MARK, MMCCLK0_MARK, - - /* MMCIF(2) */ - MMCD1_0_MARK, MMCD1_1_MARK, MMCD1_2_MARK, MMCD1_3_MARK, - MMCD1_4_MARK, MMCD1_5_MARK, MMCD1_6_MARK, MMCD1_7_MARK, - MMCCLK1_MARK, MMCCMD1_MARK, - - /* SPU2 */ - VINT_I_MARK, - - /* FLCTL */ - FCE1_MARK, FCE0_MARK, FRB_MARK, - - /* HSI */ - GP_RX_FLAG_MARK, GP_RX_DATA_MARK, GP_TX_READY_MARK, - GP_RX_WAKE_MARK, MP_TX_FLAG_MARK, MP_TX_DATA_MARK, - MP_RX_READY_MARK, MP_TX_WAKE_MARK, - - /* MFI */ - MFIv6_MARK, - MFIv4_MARK, - - MEMC_CS0_MARK, MEMC_BUSCLK_MEMC_A0_MARK, - MEMC_CS1_MEMC_A1_MARK, MEMC_ADV_MEMC_DREQ0_MARK, - MEMC_WAIT_MEMC_DREQ1_MARK, MEMC_NOE_MARK, - MEMC_NWE_MARK, MEMC_INT_MARK, - - MEMC_AD0_MARK, MEMC_AD1_MARK, MEMC_AD2_MARK, - MEMC_AD3_MARK, MEMC_AD4_MARK, MEMC_AD5_MARK, - MEMC_AD6_MARK, MEMC_AD7_MARK, MEMC_AD8_MARK, - MEMC_AD9_MARK, MEMC_AD10_MARK, MEMC_AD11_MARK, - MEMC_AD12_MARK, MEMC_AD13_MARK, MEMC_AD14_MARK, - MEMC_AD15_MARK, - - /* SIM */ - SIM_RST_MARK, SIM_CLK_MARK, SIM_D_MARK, - - /* TPU */ - TPU0TO0_MARK, TPU0TO1_MARK, - TPU0TO2_93_MARK, TPU0TO2_99_MARK, - TPU0TO3_MARK, - - /* I2C2 */ - I2C_SCL2_MARK, I2C_SDA2_MARK, - - /* I2C3(1) */ - I2C_SCL3_MARK, I2C_SDA3_MARK, - - /* I2C3(2) */ - I2C_SCL3S_MARK, I2C_SDA3S_MARK, - - /* I2C4(2) */ - I2C_SCL4_MARK, I2C_SDA4_MARK, - - /* I2C4(2) */ - I2C_SCL4S_MARK, I2C_SDA4S_MARK, - - /* KEYSC */ - KEYOUT0_MARK, KEYIN0_121_MARK, KEYIN0_136_MARK, - KEYOUT1_MARK, KEYIN1_122_MARK, KEYIN1_135_MARK, - KEYOUT2_MARK, KEYIN2_123_MARK, KEYIN2_134_MARK, - KEYOUT3_MARK, KEYIN3_124_MARK, KEYIN3_133_MARK, - KEYOUT4_MARK, KEYIN4_MARK, - KEYOUT5_MARK, KEYIN5_MARK, - KEYOUT6_MARK, KEYIN6_MARK, - KEYOUT7_MARK, KEYIN7_MARK, - - /* LCDC */ - LCDC0_SELECT_MARK, - LCDC1_SELECT_MARK, - LCDHSYN_MARK, LCDCS_MARK, LCDVSYN_MARK, LCDDCK_MARK, - LCDWR_MARK, LCDRD_MARK, LCDDISP_MARK, LCDRS_MARK, - LCDLCLK_MARK, LCDDON_MARK, - - LCDD0_MARK, LCDD1_MARK, LCDD2_MARK, LCDD3_MARK, - LCDD4_MARK, LCDD5_MARK, LCDD6_MARK, LCDD7_MARK, - LCDD8_MARK, LCDD9_MARK, LCDD10_MARK, LCDD11_MARK, - LCDD12_MARK, LCDD13_MARK, LCDD14_MARK, LCDD15_MARK, - LCDD16_MARK, LCDD17_MARK, LCDD18_MARK, LCDD19_MARK, - LCDD20_MARK, LCDD21_MARK, LCDD22_MARK, LCDD23_MARK, - - /* IRDA */ - IRDA_OUT_MARK, IRDA_IN_MARK, IRDA_FIRSEL_MARK, - IROUT_139_MARK, IROUT_140_MARK, - - /* TSIF1 */ - TS0_1SELECT_MARK, - TS0_2SELECT_MARK, - TS1_1SELECT_MARK, - TS1_2SELECT_MARK, - - TS_SPSYNC1_MARK, TS_SDAT1_MARK, - TS_SDEN1_MARK, TS_SCK1_MARK, - - /* TSIF2 */ - TS_SPSYNC2_MARK, TS_SDAT2_MARK, - TS_SDEN2_MARK, TS_SCK2_MARK, - - /* HDMI */ - HDMI_HPD_MARK, HDMI_CEC_MARK, - - /* SDHI0 */ - SDHICLK0_MARK, SDHICD0_MARK, - SDHICMD0_MARK, SDHIWP0_MARK, - SDHID0_0_MARK, SDHID0_1_MARK, - SDHID0_2_MARK, SDHID0_3_MARK, - - /* SDHI1 */ - SDHICLK1_MARK, SDHICMD1_MARK, SDHID1_0_MARK, - SDHID1_1_MARK, SDHID1_2_MARK, SDHID1_3_MARK, - - /* SDHI2 */ - SDHICLK2_MARK, SDHICMD2_MARK, SDHID2_0_MARK, - SDHID2_1_MARK, SDHID2_2_MARK, SDHID2_3_MARK, - - /* SDENC */ - SDENC_CPG_MARK, - SDENC_DV_CLKI_MARK, - - PINMUX_MARK_END, -}; - -static pinmux_enum_t pinmux_data[] = { - - /* specify valid pin states for each pin in GPIO mode */ - PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1), - PORT_DATA_O(2), PORT_DATA_I_PD(3), - PORT_DATA_I_PD(4), PORT_DATA_I_PD(5), - PORT_DATA_IO_PU_PD(6), PORT_DATA_I_PD(7), - PORT_DATA_IO_PD(8), PORT_DATA_O(9), - - PORT_DATA_O(10), PORT_DATA_O(11), - PORT_DATA_IO_PU_PD(12), PORT_DATA_IO_PD(13), - PORT_DATA_IO_PD(14), PORT_DATA_O(15), - PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17), - PORT_DATA_I_PD(18), PORT_DATA_IO(19), - - PORT_DATA_IO(20), PORT_DATA_IO(21), - PORT_DATA_IO(22), PORT_DATA_IO(23), - PORT_DATA_IO(24), PORT_DATA_IO(25), - PORT_DATA_IO(26), PORT_DATA_IO(27), - PORT_DATA_IO(28), PORT_DATA_IO(29), - - PORT_DATA_IO(30), PORT_DATA_IO(31), - PORT_DATA_IO(32), PORT_DATA_IO(33), - PORT_DATA_IO(34), PORT_DATA_IO(35), - PORT_DATA_IO(36), PORT_DATA_IO(37), - PORT_DATA_IO(38), PORT_DATA_IO(39), - - PORT_DATA_IO(40), PORT_DATA_IO(41), - PORT_DATA_IO(42), PORT_DATA_IO(43), - PORT_DATA_IO(44), PORT_DATA_IO(45), - PORT_DATA_IO_PU(46), PORT_DATA_IO_PU(47), - PORT_DATA_IO_PU(48), PORT_DATA_IO_PU(49), - - PORT_DATA_IO_PU(50), PORT_DATA_IO_PU(51), - PORT_DATA_IO_PU(52), PORT_DATA_IO_PU(53), - PORT_DATA_IO_PU(54), PORT_DATA_IO_PU(55), - PORT_DATA_IO_PU(56), PORT_DATA_IO_PU(57), - PORT_DATA_IO_PU(58), PORT_DATA_IO_PU(59), - - PORT_DATA_IO_PU(60), PORT_DATA_IO_PU(61), - PORT_DATA_IO(62), PORT_DATA_O(63), - PORT_DATA_O(64), PORT_DATA_IO_PU(65), - PORT_DATA_O(66), PORT_DATA_IO_PU(67), /*66?*/ - PORT_DATA_O(68), PORT_DATA_IO(69), - - PORT_DATA_IO(70), PORT_DATA_IO(71), - PORT_DATA_O(72), PORT_DATA_I_PU(73), - PORT_DATA_I_PU_PD(74), PORT_DATA_IO_PU_PD(75), - PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77), - PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79), - - PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81), - PORT_DATA_IO_PU_PD(82), PORT_DATA_IO_PU_PD(83), - PORT_DATA_IO_PU_PD(84), PORT_DATA_IO_PU_PD(85), - PORT_DATA_IO_PU_PD(86), PORT_DATA_IO_PU_PD(87), - PORT_DATA_IO_PU_PD(88), PORT_DATA_IO_PU_PD(89), - - PORT_DATA_IO_PU_PD(90), PORT_DATA_IO_PU_PD(91), - PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93), - PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95), - PORT_DATA_IO_PU(96), PORT_DATA_IO_PU_PD(97), - PORT_DATA_IO_PU_PD(98), PORT_DATA_O(99), /*99?*/ - - PORT_DATA_IO_PD(100), PORT_DATA_IO_PD(101), - PORT_DATA_IO_PD(102), PORT_DATA_IO_PD(103), - PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), - PORT_DATA_IO_PU(106), PORT_DATA_IO_PU(107), - PORT_DATA_IO_PU(108), PORT_DATA_IO_PU(109), - - PORT_DATA_IO_PU(110), PORT_DATA_IO_PU(111), - PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113), - PORT_DATA_IO_PU(114), PORT_DATA_IO_PU(115), - PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117), - PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), - - PORT_DATA_IO_PU(120), PORT_DATA_IO_PD(121), - PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123), - PORT_DATA_IO_PD(124), PORT_DATA_IO_PD(125), - PORT_DATA_IO_PD(126), PORT_DATA_IO_PD(127), - PORT_DATA_IO_PD(128), PORT_DATA_IO_PU_PD(129), - - PORT_DATA_IO_PU_PD(130), PORT_DATA_IO_PU_PD(131), - PORT_DATA_IO_PU_PD(132), PORT_DATA_IO_PU_PD(133), - PORT_DATA_IO_PU_PD(134), PORT_DATA_IO_PU_PD(135), - PORT_DATA_IO_PD(136), PORT_DATA_IO_PD(137), - PORT_DATA_IO_PD(138), PORT_DATA_IO_PD(139), - - PORT_DATA_IO_PD(140), PORT_DATA_IO_PD(141), - PORT_DATA_IO_PD(142), PORT_DATA_IO_PU_PD(143), - PORT_DATA_IO_PD(144), PORT_DATA_IO_PD(145), - PORT_DATA_IO_PD(146), PORT_DATA_IO_PD(147), - PORT_DATA_IO_PD(148), PORT_DATA_IO_PD(149), - - PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), - PORT_DATA_IO_PU_PD(152), PORT_DATA_I_PD(153), - PORT_DATA_IO_PU_PD(154), PORT_DATA_I_PD(155), - PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), - PORT_DATA_I_PD(158), PORT_DATA_IO_PD(159), - - PORT_DATA_O(160), PORT_DATA_IO_PD(161), - PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), - PORT_DATA_I_PD(164), PORT_DATA_IO_PD(165), - PORT_DATA_I_PD(166), PORT_DATA_I_PD(167), - PORT_DATA_I_PD(168), PORT_DATA_I_PD(169), - - PORT_DATA_I_PD(170), PORT_DATA_O(171), - PORT_DATA_IO_PU_PD(172), PORT_DATA_IO_PU_PD(173), - PORT_DATA_IO_PU_PD(174), PORT_DATA_IO_PU_PD(175), - PORT_DATA_IO_PU_PD(176), PORT_DATA_IO_PU_PD(177), - PORT_DATA_IO_PU_PD(178), PORT_DATA_O(179), - - PORT_DATA_IO_PU_PD(180), PORT_DATA_IO_PU_PD(181), - PORT_DATA_IO_PU_PD(182), PORT_DATA_IO_PU_PD(183), - PORT_DATA_IO_PU_PD(184), PORT_DATA_O(185), - PORT_DATA_IO_PU_PD(186), PORT_DATA_IO_PU_PD(187), - PORT_DATA_IO_PU_PD(188), PORT_DATA_IO_PU_PD(189), - - PORT_DATA_IO_PU_PD(190), - - /* IRQ */ - PINMUX_DATA(IRQ0_6_MARK, PORT6_FN0, MSEL1CR_0_0), - PINMUX_DATA(IRQ0_162_MARK, PORT162_FN0, MSEL1CR_0_1), - PINMUX_DATA(IRQ1_MARK, PORT12_FN0), - PINMUX_DATA(IRQ2_4_MARK, PORT4_FN0, MSEL1CR_2_0), - PINMUX_DATA(IRQ2_5_MARK, PORT5_FN0, MSEL1CR_2_1), - PINMUX_DATA(IRQ3_8_MARK, PORT8_FN0, MSEL1CR_3_0), - PINMUX_DATA(IRQ3_16_MARK, PORT16_FN0, MSEL1CR_3_1), - PINMUX_DATA(IRQ4_17_MARK, PORT17_FN0, MSEL1CR_4_0), - PINMUX_DATA(IRQ4_163_MARK, PORT163_FN0, MSEL1CR_4_1), - PINMUX_DATA(IRQ5_MARK, PORT18_FN0), - PINMUX_DATA(IRQ6_39_MARK, PORT39_FN0, MSEL1CR_6_0), - PINMUX_DATA(IRQ6_164_MARK, PORT164_FN0, MSEL1CR_6_1), - PINMUX_DATA(IRQ7_40_MARK, PORT40_FN0, MSEL1CR_7_1), - PINMUX_DATA(IRQ7_167_MARK, PORT167_FN0, MSEL1CR_7_0), - PINMUX_DATA(IRQ8_41_MARK, PORT41_FN0, MSEL1CR_8_1), - PINMUX_DATA(IRQ8_168_MARK, PORT168_FN0, MSEL1CR_8_0), - PINMUX_DATA(IRQ9_42_MARK, PORT42_FN0, MSEL1CR_9_0), - PINMUX_DATA(IRQ9_169_MARK, PORT169_FN0, MSEL1CR_9_1), - PINMUX_DATA(IRQ10_MARK, PORT65_FN0, MSEL1CR_9_1), - PINMUX_DATA(IRQ11_MARK, PORT67_FN0), - PINMUX_DATA(IRQ12_80_MARK, PORT80_FN0, MSEL1CR_12_0), - PINMUX_DATA(IRQ12_137_MARK, PORT137_FN0, MSEL1CR_12_1), - PINMUX_DATA(IRQ13_81_MARK, PORT81_FN0, MSEL1CR_13_0), - PINMUX_DATA(IRQ13_145_MARK, PORT145_FN0, MSEL1CR_13_1), - PINMUX_DATA(IRQ14_82_MARK, PORT82_FN0, MSEL1CR_14_0), - PINMUX_DATA(IRQ14_146_MARK, PORT146_FN0, MSEL1CR_14_1), - PINMUX_DATA(IRQ15_83_MARK, PORT83_FN0, MSEL1CR_15_0), - PINMUX_DATA(IRQ15_147_MARK, PORT147_FN0, MSEL1CR_15_1), - PINMUX_DATA(IRQ16_84_MARK, PORT84_FN0, MSEL1CR_16_0), - PINMUX_DATA(IRQ16_170_MARK, PORT170_FN0, MSEL1CR_16_1), - PINMUX_DATA(IRQ17_MARK, PORT85_FN0), - PINMUX_DATA(IRQ18_MARK, PORT86_FN0), - PINMUX_DATA(IRQ19_MARK, PORT87_FN0), - PINMUX_DATA(IRQ20_MARK, PORT92_FN0), - PINMUX_DATA(IRQ21_MARK, PORT93_FN0), - PINMUX_DATA(IRQ22_MARK, PORT94_FN0), - PINMUX_DATA(IRQ23_MARK, PORT95_FN0), - PINMUX_DATA(IRQ24_MARK, PORT112_FN0), - PINMUX_DATA(IRQ25_MARK, PORT119_FN0), - PINMUX_DATA(IRQ26_121_MARK, PORT121_FN0, MSEL1CR_26_1), - PINMUX_DATA(IRQ26_172_MARK, PORT172_FN0, MSEL1CR_26_0), - PINMUX_DATA(IRQ27_122_MARK, PORT122_FN0, MSEL1CR_27_1), - PINMUX_DATA(IRQ27_180_MARK, PORT180_FN0, MSEL1CR_27_0), - PINMUX_DATA(IRQ28_123_MARK, PORT123_FN0, MSEL1CR_28_1), - PINMUX_DATA(IRQ28_181_MARK, PORT181_FN0, MSEL1CR_28_0), - PINMUX_DATA(IRQ29_129_MARK, PORT129_FN0, MSEL1CR_29_1), - PINMUX_DATA(IRQ29_182_MARK, PORT182_FN0, MSEL1CR_29_0), - PINMUX_DATA(IRQ30_130_MARK, PORT130_FN0, MSEL1CR_30_1), - PINMUX_DATA(IRQ30_183_MARK, PORT183_FN0, MSEL1CR_30_0), - PINMUX_DATA(IRQ31_138_MARK, PORT138_FN0, MSEL1CR_31_1), - PINMUX_DATA(IRQ31_184_MARK, PORT184_FN0, MSEL1CR_31_0), - - /* Function 1 */ - PINMUX_DATA(BBIF2_TSCK1_MARK, PORT0_FN1), - PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT1_FN1), - PINMUX_DATA(BBIF2_TXD1_MARK, PORT2_FN1), - PINMUX_DATA(BBIF2_RXD_MARK, PORT3_FN1), - PINMUX_DATA(FSIACK_MARK, PORT4_FN1), - PINMUX_DATA(FSIAILR_MARK, PORT5_FN1), - PINMUX_DATA(FSIAIBT_MARK, PORT6_FN1), - PINMUX_DATA(FSIAISLD_MARK, PORT7_FN1), - PINMUX_DATA(FSIAOMC_MARK, PORT8_FN1), - PINMUX_DATA(FSIAOLR_MARK, PORT9_FN1), - PINMUX_DATA(FSIAOBT_MARK, PORT10_FN1), - PINMUX_DATA(FSIAOSLD_MARK, PORT11_FN1), - PINMUX_DATA(FMSOCK_MARK, PORT12_FN1), - PINMUX_DATA(FMSOOLR_MARK, PORT13_FN1), - PINMUX_DATA(FMSOOBT_MARK, PORT14_FN1), - PINMUX_DATA(FMSOSLD_MARK, PORT15_FN1), - PINMUX_DATA(FMSOILR_MARK, PORT16_FN1), - PINMUX_DATA(FMSOIBT_MARK, PORT17_FN1), - PINMUX_DATA(FMSISLD_MARK, PORT18_FN1), - PINMUX_DATA(A0_MARK, PORT19_FN1), - PINMUX_DATA(A1_MARK, PORT20_FN1), - PINMUX_DATA(A2_MARK, PORT21_FN1), - PINMUX_DATA(A3_MARK, PORT22_FN1), - PINMUX_DATA(A4_FOE_MARK, PORT23_FN1), - PINMUX_DATA(A5_FCDE_MARK, PORT24_FN1), - PINMUX_DATA(A6_MARK, PORT25_FN1), - PINMUX_DATA(A7_MARK, PORT26_FN1), - PINMUX_DATA(A8_MARK, PORT27_FN1), - PINMUX_DATA(A9_MARK, PORT28_FN1), - PINMUX_DATA(A10_MARK, PORT29_FN1), - PINMUX_DATA(A11_MARK, PORT30_FN1), - PINMUX_DATA(A12_MARK, PORT31_FN1), - PINMUX_DATA(A13_MARK, PORT32_FN1), - PINMUX_DATA(A14_MARK, PORT33_FN1), - PINMUX_DATA(A15_MARK, PORT34_FN1), - PINMUX_DATA(A16_MARK, PORT35_FN1), - PINMUX_DATA(A17_MARK, PORT36_FN1), - PINMUX_DATA(A18_MARK, PORT37_FN1), - PINMUX_DATA(A19_MARK, PORT38_FN1), - PINMUX_DATA(A20_MARK, PORT39_FN1), - PINMUX_DATA(A21_MARK, PORT40_FN1), - PINMUX_DATA(A22_MARK, PORT41_FN1), - PINMUX_DATA(A23_MARK, PORT42_FN1), - PINMUX_DATA(A24_MARK, PORT43_FN1), - PINMUX_DATA(A25_MARK, PORT44_FN1), - PINMUX_DATA(A26_MARK, PORT45_FN1), - PINMUX_DATA(D0_NAF0_MARK, PORT46_FN1), - PINMUX_DATA(D1_NAF1_MARK, PORT47_FN1), - PINMUX_DATA(D2_NAF2_MARK, PORT48_FN1), - PINMUX_DATA(D3_NAF3_MARK, PORT49_FN1), - PINMUX_DATA(D4_NAF4_MARK, PORT50_FN1), - PINMUX_DATA(D5_NAF5_MARK, PORT51_FN1), - PINMUX_DATA(D6_NAF6_MARK, PORT52_FN1), - PINMUX_DATA(D7_NAF7_MARK, PORT53_FN1), - PINMUX_DATA(D8_NAF8_MARK, PORT54_FN1), - PINMUX_DATA(D9_NAF9_MARK, PORT55_FN1), - PINMUX_DATA(D10_NAF10_MARK, PORT56_FN1), - PINMUX_DATA(D11_NAF11_MARK, PORT57_FN1), - PINMUX_DATA(D12_NAF12_MARK, PORT58_FN1), - PINMUX_DATA(D13_NAF13_MARK, PORT59_FN1), - PINMUX_DATA(D14_NAF14_MARK, PORT60_FN1), - PINMUX_DATA(D15_NAF15_MARK, PORT61_FN1), - PINMUX_DATA(CS0_MARK, PORT62_FN1), - PINMUX_DATA(CS2_MARK, PORT63_FN1), - PINMUX_DATA(CS4_MARK, PORT64_FN1), - PINMUX_DATA(CS5A_MARK, PORT65_FN1), - PINMUX_DATA(CS5B_MARK, PORT66_FN1), - PINMUX_DATA(CS6A_MARK, PORT67_FN1), - PINMUX_DATA(FCE0_MARK, PORT68_FN1), - PINMUX_DATA(RD_FSC_MARK, PORT69_FN1), - PINMUX_DATA(WE0_FWE_MARK, PORT70_FN1), - PINMUX_DATA(WE1_MARK, PORT71_FN1), - PINMUX_DATA(CKO_MARK, PORT72_FN1), - PINMUX_DATA(FRB_MARK, PORT73_FN1), - PINMUX_DATA(WAIT_MARK, PORT74_FN1), - PINMUX_DATA(RDWR_MARK, PORT75_FN1), - PINMUX_DATA(MEMC_AD0_MARK, PORT76_FN1), - PINMUX_DATA(MEMC_AD1_MARK, PORT77_FN1), - PINMUX_DATA(MEMC_AD2_MARK, PORT78_FN1), - PINMUX_DATA(MEMC_AD3_MARK, PORT79_FN1), - PINMUX_DATA(MEMC_AD4_MARK, PORT80_FN1), - PINMUX_DATA(MEMC_AD5_MARK, PORT81_FN1), - PINMUX_DATA(MEMC_AD6_MARK, PORT82_FN1), - PINMUX_DATA(MEMC_AD7_MARK, PORT83_FN1), - PINMUX_DATA(MEMC_AD8_MARK, PORT84_FN1), - PINMUX_DATA(MEMC_AD9_MARK, PORT85_FN1), - PINMUX_DATA(MEMC_AD10_MARK, PORT86_FN1), - PINMUX_DATA(MEMC_AD11_MARK, PORT87_FN1), - PINMUX_DATA(MEMC_AD12_MARK, PORT88_FN1), - PINMUX_DATA(MEMC_AD13_MARK, PORT89_FN1), - PINMUX_DATA(MEMC_AD14_MARK, PORT90_FN1), - PINMUX_DATA(MEMC_AD15_MARK, PORT91_FN1), - PINMUX_DATA(MEMC_CS0_MARK, PORT92_FN1), - PINMUX_DATA(MEMC_BUSCLK_MEMC_A0_MARK, PORT93_FN1), - PINMUX_DATA(MEMC_CS1_MEMC_A1_MARK, PORT94_FN1), - PINMUX_DATA(MEMC_ADV_MEMC_DREQ0_MARK, PORT95_FN1), - PINMUX_DATA(MEMC_WAIT_MEMC_DREQ1_MARK, PORT96_FN1), - PINMUX_DATA(MEMC_NOE_MARK, PORT97_FN1), - PINMUX_DATA(MEMC_NWE_MARK, PORT98_FN1), - PINMUX_DATA(MEMC_INT_MARK, PORT99_FN1), - PINMUX_DATA(VIO_VD_MARK, PORT100_FN1), - PINMUX_DATA(VIO_HD_MARK, PORT101_FN1), - PINMUX_DATA(VIO_D0_MARK, PORT102_FN1), - PINMUX_DATA(VIO_D1_MARK, PORT103_FN1), - PINMUX_DATA(VIO_D2_MARK, PORT104_FN1), - PINMUX_DATA(VIO_D3_MARK, PORT105_FN1), - PINMUX_DATA(VIO_D4_MARK, PORT106_FN1), - PINMUX_DATA(VIO_D5_MARK, PORT107_FN1), - PINMUX_DATA(VIO_D6_MARK, PORT108_FN1), - PINMUX_DATA(VIO_D7_MARK, PORT109_FN1), - PINMUX_DATA(VIO_D8_MARK, PORT110_FN1), - PINMUX_DATA(VIO_D9_MARK, PORT111_FN1), - PINMUX_DATA(VIO_D10_MARK, PORT112_FN1), - PINMUX_DATA(VIO_D11_MARK, PORT113_FN1), - PINMUX_DATA(VIO_D12_MARK, PORT114_FN1), - PINMUX_DATA(VIO_D13_MARK, PORT115_FN1), - PINMUX_DATA(VIO_D14_MARK, PORT116_FN1), - PINMUX_DATA(VIO_D15_MARK, PORT117_FN1), - PINMUX_DATA(VIO_CLK_MARK, PORT118_FN1), - PINMUX_DATA(VIO_FIELD_MARK, PORT119_FN1), - PINMUX_DATA(VIO_CKO_MARK, PORT120_FN1), - PINMUX_DATA(LCDD0_MARK, PORT121_FN1), - PINMUX_DATA(LCDD1_MARK, PORT122_FN1), - PINMUX_DATA(LCDD2_MARK, PORT123_FN1), - PINMUX_DATA(LCDD3_MARK, PORT124_FN1), - PINMUX_DATA(LCDD4_MARK, PORT125_FN1), - PINMUX_DATA(LCDD5_MARK, PORT126_FN1), - PINMUX_DATA(LCDD6_MARK, PORT127_FN1), - PINMUX_DATA(LCDD7_MARK, PORT128_FN1), - PINMUX_DATA(LCDD8_MARK, PORT129_FN1), - PINMUX_DATA(LCDD9_MARK, PORT130_FN1), - PINMUX_DATA(LCDD10_MARK, PORT131_FN1), - PINMUX_DATA(LCDD11_MARK, PORT132_FN1), - PINMUX_DATA(LCDD12_MARK, PORT133_FN1), - PINMUX_DATA(LCDD13_MARK, PORT134_FN1), - PINMUX_DATA(LCDD14_MARK, PORT135_FN1), - PINMUX_DATA(LCDD15_MARK, PORT136_FN1), - PINMUX_DATA(LCDD16_MARK, PORT137_FN1), - PINMUX_DATA(LCDD17_MARK, PORT138_FN1), - PINMUX_DATA(LCDD18_MARK, PORT139_FN1), - PINMUX_DATA(LCDD19_MARK, PORT140_FN1), - PINMUX_DATA(LCDD20_MARK, PORT141_FN1), - PINMUX_DATA(LCDD21_MARK, PORT142_FN1), - PINMUX_DATA(LCDD22_MARK, PORT143_FN1), - PINMUX_DATA(LCDD23_MARK, PORT144_FN1), - PINMUX_DATA(LCDHSYN_MARK, PORT145_FN1), - PINMUX_DATA(LCDVSYN_MARK, PORT146_FN1), - PINMUX_DATA(LCDDCK_MARK, PORT147_FN1), - PINMUX_DATA(LCDRD_MARK, PORT148_FN1), - PINMUX_DATA(LCDDISP_MARK, PORT149_FN1), - PINMUX_DATA(LCDLCLK_MARK, PORT150_FN1), - PINMUX_DATA(LCDDON_MARK, PORT151_FN1), - PINMUX_DATA(SCIFA0_TXD_MARK, PORT152_FN1), - PINMUX_DATA(SCIFA0_RXD_MARK, PORT153_FN1), - PINMUX_DATA(SCIFA1_TXD_MARK, PORT154_FN1), - PINMUX_DATA(SCIFA1_RXD_MARK, PORT155_FN1), - PINMUX_DATA(TS_SPSYNC1_MARK, PORT156_FN1), - PINMUX_DATA(TS_SDAT1_MARK, PORT157_FN1), - PINMUX_DATA(TS_SDEN1_MARK, PORT158_FN1), - PINMUX_DATA(TS_SCK1_MARK, PORT159_FN1), - PINMUX_DATA(TPU0TO0_MARK, PORT160_FN1), - PINMUX_DATA(TPU0TO1_MARK, PORT161_FN1), - PINMUX_DATA(SCIFB_SCK_MARK, PORT162_FN1), - PINMUX_DATA(SCIFB_RTS_MARK, PORT163_FN1), - PINMUX_DATA(SCIFB_CTS_MARK, PORT164_FN1), - PINMUX_DATA(SCIFB_TXD_MARK, PORT165_FN1), - PINMUX_DATA(SCIFB_RXD_MARK, PORT166_FN1), - PINMUX_DATA(VBUS0_0_MARK, PORT167_FN1), - PINMUX_DATA(VBUS0_1_MARK, PORT168_FN1), - PINMUX_DATA(HDMI_HPD_MARK, PORT169_FN1), - PINMUX_DATA(HDMI_CEC_MARK, PORT170_FN1), - PINMUX_DATA(SDHICLK0_MARK, PORT171_FN1), - PINMUX_DATA(SDHICD0_MARK, PORT172_FN1), - PINMUX_DATA(SDHID0_0_MARK, PORT173_FN1), - PINMUX_DATA(SDHID0_1_MARK, PORT174_FN1), - PINMUX_DATA(SDHID0_2_MARK, PORT175_FN1), - PINMUX_DATA(SDHID0_3_MARK, PORT176_FN1), - PINMUX_DATA(SDHICMD0_MARK, PORT177_FN1), - PINMUX_DATA(SDHIWP0_MARK, PORT178_FN1), - PINMUX_DATA(SDHICLK1_MARK, PORT179_FN1), - PINMUX_DATA(SDHID1_0_MARK, PORT180_FN1), - PINMUX_DATA(SDHID1_1_MARK, PORT181_FN1), - PINMUX_DATA(SDHID1_2_MARK, PORT182_FN1), - PINMUX_DATA(SDHID1_3_MARK, PORT183_FN1), - PINMUX_DATA(SDHICMD1_MARK, PORT184_FN1), - PINMUX_DATA(SDHICLK2_MARK, PORT185_FN1), - PINMUX_DATA(SDHID2_0_MARK, PORT186_FN1), - PINMUX_DATA(SDHID2_1_MARK, PORT187_FN1), - PINMUX_DATA(SDHID2_2_MARK, PORT188_FN1), - PINMUX_DATA(SDHID2_3_MARK, PORT189_FN1), - PINMUX_DATA(SDHICMD2_MARK, PORT190_FN1), - - /* Function 2 */ - PINMUX_DATA(FSIBCK_MARK, PORT4_FN2), - PINMUX_DATA(SCIFA4_RXD_MARK, PORT5_FN2), - PINMUX_DATA(SCIFA4_TXD_MARK, PORT6_FN2), - PINMUX_DATA(SCIFA5_RXD_MARK, PORT8_FN2), - PINMUX_DATA(FSIASPDIF_11_MARK, PORT11_FN2), - PINMUX_DATA(SCIFA5_TXD_MARK, PORT12_FN2), - PINMUX_DATA(FMSIOLR_MARK, PORT13_FN2), - PINMUX_DATA(FMSIOBT_MARK, PORT14_FN2), - PINMUX_DATA(FSIASPDIF_15_MARK, PORT15_FN2), - PINMUX_DATA(FMSIILR_MARK, PORT16_FN2), - PINMUX_DATA(FMSIIBT_MARK, PORT17_FN2), - PINMUX_DATA(BS_MARK, PORT19_FN2), - PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT36_FN2), - PINMUX_DATA(MSIOF0_TSCK_MARK, PORT37_FN2), - PINMUX_DATA(MSIOF0_RXD_MARK, PORT38_FN2), - PINMUX_DATA(MSIOF0_RSCK_MARK, PORT39_FN2), - PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT40_FN2), - PINMUX_DATA(MSIOF0_MCK0_MARK, PORT41_FN2), - PINMUX_DATA(MSIOF0_MCK1_MARK, PORT42_FN2), - PINMUX_DATA(MSIOF0_SS1_MARK, PORT43_FN2), - PINMUX_DATA(MSIOF0_SS2_MARK, PORT44_FN2), - PINMUX_DATA(MSIOF0_TXD_MARK, PORT45_FN2), - PINMUX_DATA(FMSICK_MARK, PORT65_FN2), - PINMUX_DATA(FCE1_MARK, PORT66_FN2), - PINMUX_DATA(BBIF1_RXD_MARK, PORT76_FN2), - PINMUX_DATA(BBIF1_TSYNC_MARK, PORT77_FN2), - PINMUX_DATA(BBIF1_TSCK_MARK, PORT78_FN2), - PINMUX_DATA(BBIF1_TXD_MARK, PORT79_FN2), - PINMUX_DATA(BBIF1_RSCK_MARK, PORT80_FN2), - PINMUX_DATA(BBIF1_RSYNC_MARK, PORT81_FN2), - PINMUX_DATA(BBIF1_FLOW_MARK, PORT82_FN2), - PINMUX_DATA(BB_RX_FLOW_N_MARK, PORT83_FN2), - PINMUX_DATA(MSIOF1_RSCK_MARK, PORT84_FN2), - PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT85_FN2), - PINMUX_DATA(MSIOF1_MCK0_MARK, PORT86_FN2), - PINMUX_DATA(MSIOF1_MCK1_MARK, PORT87_FN2), - PINMUX_DATA(MSIOF1_TSCK_88_MARK, PORT88_FN2, MSEL4CR_10_1), - PINMUX_DATA(MSIOF1_TSYNC_89_MARK, PORT89_FN2, MSEL4CR_10_1), - PINMUX_DATA(MSIOF1_TXD_90_MARK, PORT90_FN2, MSEL4CR_10_1), - PINMUX_DATA(MSIOF1_RXD_91_MARK, PORT91_FN2, MSEL4CR_10_1), - PINMUX_DATA(MSIOF1_SS1_92_MARK, PORT92_FN2, MSEL4CR_10_1), - PINMUX_DATA(MSIOF1_SS2_93_MARK, PORT93_FN2, MSEL4CR_10_1), - PINMUX_DATA(SCIFA2_CTS1_MARK, PORT94_FN2), - PINMUX_DATA(SCIFA2_RTS1_MARK, PORT95_FN2), - PINMUX_DATA(SCIFA2_TXD1_MARK, PORT96_FN2), - PINMUX_DATA(SCIFA2_RXD1_MARK, PORT97_FN2), - PINMUX_DATA(SCIFA2_SCK1_MARK, PORT98_FN2), - PINMUX_DATA(I2C_SCL2_MARK, PORT110_FN2), - PINMUX_DATA(I2C_SDA2_MARK, PORT111_FN2), - PINMUX_DATA(I2C_SCL3_MARK, PORT114_FN2, MSEL4CR_16_1), - PINMUX_DATA(I2C_SDA3_MARK, PORT115_FN2, MSEL4CR_16_1), - PINMUX_DATA(I2C_SCL4_MARK, PORT116_FN2, MSEL4CR_17_1), - PINMUX_DATA(I2C_SDA4_MARK, PORT117_FN2, MSEL4CR_17_1), - PINMUX_DATA(MSIOF2_RSCK_MARK, PORT134_FN2), - PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT135_FN2), - PINMUX_DATA(MSIOF2_MCK0_MARK, PORT136_FN2), - PINMUX_DATA(MSIOF2_MCK1_MARK, PORT137_FN2), - PINMUX_DATA(MSIOF2_SS1_MARK, PORT138_FN2), - PINMUX_DATA(MSIOF2_SS2_MARK, PORT139_FN2), - PINMUX_DATA(SCIFA3_CTS_140_MARK, PORT140_FN2, MSEL3CR_9_1), - PINMUX_DATA(SCIFA3_RTS_141_MARK, PORT141_FN2), - PINMUX_DATA(SCIFA3_SCK_MARK, PORT142_FN2), - PINMUX_DATA(SCIFA3_TXD_MARK, PORT143_FN2), - PINMUX_DATA(SCIFA3_RXD_MARK, PORT144_FN2), - PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT148_FN2), - PINMUX_DATA(MSIOF2_TSCK_MARK, PORT149_FN2), - PINMUX_DATA(MSIOF2_RXD_MARK, PORT150_FN2), - PINMUX_DATA(MSIOF2_TXD_MARK, PORT151_FN2), - PINMUX_DATA(SCIFA0_SCK_MARK, PORT156_FN2), - PINMUX_DATA(SCIFA0_RTS_MARK, PORT157_FN2), - PINMUX_DATA(SCIFA0_CTS_MARK, PORT158_FN2), - PINMUX_DATA(SCIFA1_SCK_MARK, PORT159_FN2), - PINMUX_DATA(SCIFA1_RTS_MARK, PORT160_FN2), - PINMUX_DATA(SCIFA1_CTS_MARK, PORT161_FN2), - - /* Function 3 */ - PINMUX_DATA(VIO_CKO1_MARK, PORT16_FN3), - PINMUX_DATA(VIO_CKO2_MARK, PORT17_FN3), - PINMUX_DATA(IDIN_1_18_MARK, PORT18_FN3, MSEL4CR_14_1), - PINMUX_DATA(MSIOF1_TSCK_39_MARK, PORT39_FN3, MSEL4CR_10_0), - PINMUX_DATA(MSIOF1_TSYNC_40_MARK, PORT40_FN3, MSEL4CR_10_0), - PINMUX_DATA(MSIOF1_TXD_41_MARK, PORT41_FN3, MSEL4CR_10_0), - PINMUX_DATA(MSIOF1_RXD_42_MARK, PORT42_FN3, MSEL4CR_10_0), - PINMUX_DATA(MSIOF1_SS1_43_MARK, PORT43_FN3, MSEL4CR_10_0), - PINMUX_DATA(MSIOF1_SS2_44_MARK, PORT44_FN3, MSEL4CR_10_0), - PINMUX_DATA(MMCD1_0_MARK, PORT54_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMCD1_1_MARK, PORT55_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMCD1_2_MARK, PORT56_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMCD1_3_MARK, PORT57_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMCD1_4_MARK, PORT58_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMCD1_5_MARK, PORT59_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMCD1_6_MARK, PORT60_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMCD1_7_MARK, PORT61_FN3, MSEL4CR_15_1), - PINMUX_DATA(VINT_I_MARK, PORT65_FN3), - PINMUX_DATA(MMCCLK1_MARK, PORT66_FN3, MSEL4CR_15_1), - PINMUX_DATA(MMCCMD1_MARK, PORT67_FN3, MSEL4CR_15_1), - PINMUX_DATA(TPU0TO2_93_MARK, PORT93_FN3), - PINMUX_DATA(TPU0TO2_99_MARK, PORT99_FN3), - PINMUX_DATA(TPU0TO3_MARK, PORT112_FN3), - PINMUX_DATA(IDIN_0_MARK, PORT113_FN3), - PINMUX_DATA(EXTLP_0_MARK, PORT114_FN3), - PINMUX_DATA(OVCN2_0_MARK, PORT115_FN3), - PINMUX_DATA(PWEN_0_MARK, PORT116_FN3), - PINMUX_DATA(OVCN_0_MARK, PORT117_FN3), - PINMUX_DATA(KEYOUT7_MARK, PORT121_FN3), - PINMUX_DATA(KEYOUT6_MARK, PORT122_FN3), - PINMUX_DATA(KEYOUT5_MARK, PORT123_FN3), - PINMUX_DATA(KEYOUT4_MARK, PORT124_FN3), - PINMUX_DATA(KEYOUT3_MARK, PORT125_FN3), - PINMUX_DATA(KEYOUT2_MARK, PORT126_FN3), - PINMUX_DATA(KEYOUT1_MARK, PORT127_FN3), - PINMUX_DATA(KEYOUT0_MARK, PORT128_FN3), - PINMUX_DATA(KEYIN7_MARK, PORT129_FN3), - PINMUX_DATA(KEYIN6_MARK, PORT130_FN3), - PINMUX_DATA(KEYIN5_MARK, PORT131_FN3), - PINMUX_DATA(KEYIN4_MARK, PORT132_FN3), - PINMUX_DATA(KEYIN3_133_MARK, PORT133_FN3, MSEL4CR_18_0), - PINMUX_DATA(KEYIN2_134_MARK, PORT134_FN3, MSEL4CR_18_0), - PINMUX_DATA(KEYIN1_135_MARK, PORT135_FN3, MSEL4CR_18_0), - PINMUX_DATA(KEYIN0_136_MARK, PORT136_FN3, MSEL4CR_18_0), - PINMUX_DATA(TS_SPSYNC2_MARK, PORT137_FN3), - PINMUX_DATA(IROUT_139_MARK, PORT139_FN3), - PINMUX_DATA(IRDA_OUT_MARK, PORT140_FN3), - PINMUX_DATA(IRDA_IN_MARK, PORT141_FN3), - PINMUX_DATA(IRDA_FIRSEL_MARK, PORT142_FN3), - PINMUX_DATA(TS_SDAT2_MARK, PORT145_FN3), - PINMUX_DATA(TS_SDEN2_MARK, PORT146_FN3), - PINMUX_DATA(TS_SCK2_MARK, PORT147_FN3), - - /* Function 4 */ - PINMUX_DATA(SCIFA3_CTS_43_MARK, PORT43_FN4, MSEL3CR_9_0), - PINMUX_DATA(SCIFA3_RTS_44_MARK, PORT44_FN4), - PINMUX_DATA(GP_RX_FLAG_MARK, PORT76_FN4), - PINMUX_DATA(GP_RX_DATA_MARK, PORT77_FN4), - PINMUX_DATA(GP_TX_READY_MARK, PORT78_FN4), - PINMUX_DATA(GP_RX_WAKE_MARK, PORT79_FN4), - PINMUX_DATA(MP_TX_FLAG_MARK, PORT80_FN4), - PINMUX_DATA(MP_TX_DATA_MARK, PORT81_FN4), - PINMUX_DATA(MP_RX_READY_MARK, PORT82_FN4), - PINMUX_DATA(MP_TX_WAKE_MARK, PORT83_FN4), - PINMUX_DATA(MMCD0_0_MARK, PORT84_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMCD0_1_MARK, PORT85_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMCD0_2_MARK, PORT86_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMCD0_3_MARK, PORT87_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMCD0_4_MARK, PORT88_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMCD0_5_MARK, PORT89_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMCD0_6_MARK, PORT90_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMCD0_7_MARK, PORT91_FN4, MSEL4CR_15_0), - PINMUX_DATA(MMCCMD0_MARK, PORT92_FN4, MSEL4CR_15_0), - PINMUX_DATA(SIM_RST_MARK, PORT94_FN4), - PINMUX_DATA(SIM_CLK_MARK, PORT95_FN4), - PINMUX_DATA(SIM_D_MARK, PORT98_FN4), - PINMUX_DATA(MMCCLK0_MARK, PORT99_FN4, MSEL4CR_15_0), - PINMUX_DATA(IDIN_1_113_MARK, PORT113_FN4, MSEL4CR_14_0), - PINMUX_DATA(OVCN_1_114_MARK, PORT114_FN4, MSEL4CR_14_0), - PINMUX_DATA(PWEN_1_115_MARK, PORT115_FN4), - PINMUX_DATA(EXTLP_1_MARK, PORT116_FN4), - PINMUX_DATA(OVCN2_1_MARK, PORT117_FN4), - PINMUX_DATA(KEYIN0_121_MARK, PORT121_FN4, MSEL4CR_18_1), - PINMUX_DATA(KEYIN1_122_MARK, PORT122_FN4, MSEL4CR_18_1), - PINMUX_DATA(KEYIN2_123_MARK, PORT123_FN4, MSEL4CR_18_1), - PINMUX_DATA(KEYIN3_124_MARK, PORT124_FN4, MSEL4CR_18_1), - PINMUX_DATA(PWEN_1_138_MARK, PORT138_FN4), - PINMUX_DATA(IROUT_140_MARK, PORT140_FN4), - PINMUX_DATA(LCDCS_MARK, PORT145_FN4), - PINMUX_DATA(LCDWR_MARK, PORT147_FN4), - PINMUX_DATA(LCDRS_MARK, PORT149_FN4), - PINMUX_DATA(OVCN_1_162_MARK, PORT162_FN4, MSEL4CR_14_1), - - /* Function 5 */ - PINMUX_DATA(GPI0_MARK, PORT41_FN5), - PINMUX_DATA(GPI1_MARK, PORT42_FN5), - PINMUX_DATA(GPO0_MARK, PORT43_FN5), - PINMUX_DATA(GPO1_MARK, PORT44_FN5), - PINMUX_DATA(I2C_SCL3S_MARK, PORT137_FN5, MSEL4CR_16_0), - PINMUX_DATA(I2C_SDA3S_MARK, PORT145_FN5, MSEL4CR_16_0), - PINMUX_DATA(I2C_SCL4S_MARK, PORT146_FN5, MSEL4CR_17_0), - PINMUX_DATA(I2C_SDA4S_MARK, PORT147_FN5, MSEL4CR_17_0), - - /* Function select */ - PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0), - PINMUX_DATA(LCDC1_SELECT_MARK, MSEL3CR_6_1), - - PINMUX_DATA(TS0_1SELECT_MARK, MSEL3CR_21_0, MSEL3CR_20_0), - PINMUX_DATA(TS0_2SELECT_MARK, MSEL3CR_21_0, MSEL3CR_20_1), - PINMUX_DATA(TS1_1SELECT_MARK, MSEL3CR_27_0, MSEL3CR_26_0), - PINMUX_DATA(TS1_2SELECT_MARK, MSEL3CR_27_0, MSEL3CR_26_1), - - PINMUX_DATA(SDENC_CPG_MARK, MSEL4CR_19_0), - PINMUX_DATA(SDENC_DV_CLKI_MARK, MSEL4CR_19_1), - - PINMUX_DATA(MFIv6_MARK, MSEL4CR_6_0), - PINMUX_DATA(MFIv4_MARK, MSEL4CR_6_1), -}; - -static struct pinmux_gpio pinmux_gpios[] = { - - /* PORT */ - GPIO_PORT_ALL(), - - /* IRQ */ - GPIO_FN(IRQ0_6), GPIO_FN(IRQ0_162), GPIO_FN(IRQ1), - GPIO_FN(IRQ2_4), GPIO_FN(IRQ2_5), GPIO_FN(IRQ3_8), - GPIO_FN(IRQ3_16), GPIO_FN(IRQ4_17), GPIO_FN(IRQ4_163), - GPIO_FN(IRQ5), GPIO_FN(IRQ6_39), GPIO_FN(IRQ6_164), - GPIO_FN(IRQ7_40), GPIO_FN(IRQ7_167), GPIO_FN(IRQ8_41), - GPIO_FN(IRQ8_168), GPIO_FN(IRQ9_42), GPIO_FN(IRQ9_169), - GPIO_FN(IRQ10), GPIO_FN(IRQ11), GPIO_FN(IRQ12_80), - GPIO_FN(IRQ12_137), GPIO_FN(IRQ13_81), GPIO_FN(IRQ13_145), - GPIO_FN(IRQ14_82), GPIO_FN(IRQ14_146), GPIO_FN(IRQ15_83), - GPIO_FN(IRQ15_147), GPIO_FN(IRQ16_84), GPIO_FN(IRQ16_170), - GPIO_FN(IRQ17), GPIO_FN(IRQ18), GPIO_FN(IRQ19), - GPIO_FN(IRQ20), GPIO_FN(IRQ21), GPIO_FN(IRQ22), - GPIO_FN(IRQ23), GPIO_FN(IRQ24), GPIO_FN(IRQ25), - GPIO_FN(IRQ26_121), GPIO_FN(IRQ26_172), GPIO_FN(IRQ27_122), - GPIO_FN(IRQ27_180), GPIO_FN(IRQ28_123), GPIO_FN(IRQ28_181), - GPIO_FN(IRQ29_129), GPIO_FN(IRQ29_182), GPIO_FN(IRQ30_130), - GPIO_FN(IRQ30_183), GPIO_FN(IRQ31_138), GPIO_FN(IRQ31_184), - - /* MSIOF0 */ - GPIO_FN(MSIOF0_TSYNC), GPIO_FN(MSIOF0_TSCK), GPIO_FN(MSIOF0_RXD), - GPIO_FN(MSIOF0_RSCK), GPIO_FN(MSIOF0_RSYNC), GPIO_FN(MSIOF0_MCK0), - GPIO_FN(MSIOF0_MCK1), GPIO_FN(MSIOF0_SS1), GPIO_FN(MSIOF0_SS2), - GPIO_FN(MSIOF0_TXD), - - /* MSIOF1 */ - GPIO_FN(MSIOF1_TSCK_39), GPIO_FN(MSIOF1_TSCK_88), - GPIO_FN(MSIOF1_TSYNC_40), GPIO_FN(MSIOF1_TSYNC_89), - GPIO_FN(MSIOF1_TXD_41), GPIO_FN(MSIOF1_TXD_90), - GPIO_FN(MSIOF1_RXD_42), GPIO_FN(MSIOF1_RXD_91), - GPIO_FN(MSIOF1_SS1_43), GPIO_FN(MSIOF1_SS1_92), - GPIO_FN(MSIOF1_SS2_44), GPIO_FN(MSIOF1_SS2_93), - GPIO_FN(MSIOF1_RSCK), GPIO_FN(MSIOF1_RSYNC), - GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1), - - /* MSIOF2 */ - GPIO_FN(MSIOF2_RSCK), GPIO_FN(MSIOF2_RSYNC), GPIO_FN(MSIOF2_MCK0), - GPIO_FN(MSIOF2_MCK1), GPIO_FN(MSIOF2_SS1), GPIO_FN(MSIOF2_SS2), - GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_TSCK), GPIO_FN(MSIOF2_RXD), - GPIO_FN(MSIOF2_TXD), - - /* BBIF1 */ - GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TSYNC), GPIO_FN(BBIF1_TSCK), - GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC), - GPIO_FN(BBIF1_FLOW), GPIO_FN(BB_RX_FLOW_N), - - /* BBIF2 */ - GPIO_FN(BBIF2_TSCK1), GPIO_FN(BBIF2_TSYNC1), - GPIO_FN(BBIF2_TXD1), GPIO_FN(BBIF2_RXD), - - /* FSI */ - GPIO_FN(FSIACK), GPIO_FN(FSIBCK), GPIO_FN(FSIAILR), - GPIO_FN(FSIAIBT), GPIO_FN(FSIAISLD), GPIO_FN(FSIAOMC), - GPIO_FN(FSIAOLR), GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), - GPIO_FN(FSIASPDIF_11), GPIO_FN(FSIASPDIF_15), - - /* FMSI */ - GPIO_FN(FMSOCK), GPIO_FN(FMSOOLR), GPIO_FN(FMSIOLR), - GPIO_FN(FMSOOBT), GPIO_FN(FMSIOBT), GPIO_FN(FMSOSLD), - GPIO_FN(FMSOILR), GPIO_FN(FMSIILR), GPIO_FN(FMSOIBT), - GPIO_FN(FMSIIBT), GPIO_FN(FMSISLD), GPIO_FN(FMSICK), - - /* SCIFA0 */ - GPIO_FN(SCIFA0_TXD), GPIO_FN(SCIFA0_RXD), GPIO_FN(SCIFA0_SCK), - GPIO_FN(SCIFA0_RTS), GPIO_FN(SCIFA0_CTS), - - /* SCIFA1 */ - GPIO_FN(SCIFA1_TXD), GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_SCK), - GPIO_FN(SCIFA1_RTS), GPIO_FN(SCIFA1_CTS), - - /* SCIFA2 */ - GPIO_FN(SCIFA2_CTS1), GPIO_FN(SCIFA2_RTS1), GPIO_FN(SCIFA2_TXD1), - GPIO_FN(SCIFA2_RXD1), GPIO_FN(SCIFA2_SCK1), - - /* SCIFA3 */ - GPIO_FN(SCIFA3_CTS_43), GPIO_FN(SCIFA3_CTS_140), - GPIO_FN(SCIFA3_RTS_44), GPIO_FN(SCIFA3_RTS_141), - GPIO_FN(SCIFA3_SCK), GPIO_FN(SCIFA3_TXD), - GPIO_FN(SCIFA3_RXD), - - /* SCIFA4 */ - GPIO_FN(SCIFA4_RXD), GPIO_FN(SCIFA4_TXD), - - /* SCIFA5 */ - GPIO_FN(SCIFA5_RXD), GPIO_FN(SCIFA5_TXD), - - /* SCIFB */ - GPIO_FN(SCIFB_SCK), GPIO_FN(SCIFB_RTS), GPIO_FN(SCIFB_CTS), - GPIO_FN(SCIFB_TXD), GPIO_FN(SCIFB_RXD), - - /* CEU */ - GPIO_FN(VIO_HD), GPIO_FN(VIO_CKO1), GPIO_FN(VIO_CKO2), - GPIO_FN(VIO_VD), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD), - GPIO_FN(VIO_CKO), GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), - GPIO_FN(VIO_D2), GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), - GPIO_FN(VIO_D5), GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), - GPIO_FN(VIO_D8), GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), - GPIO_FN(VIO_D11), GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), - GPIO_FN(VIO_D14), GPIO_FN(VIO_D15), - - /* USB0 */ - GPIO_FN(IDIN_0), GPIO_FN(EXTLP_0), GPIO_FN(OVCN2_0), - GPIO_FN(PWEN_0), GPIO_FN(OVCN_0), GPIO_FN(VBUS0_0), - - /* USB1 */ - GPIO_FN(IDIN_1_18), GPIO_FN(IDIN_1_113), - GPIO_FN(OVCN_1_114), GPIO_FN(OVCN_1_162), - GPIO_FN(PWEN_1_115), GPIO_FN(PWEN_1_138), - GPIO_FN(EXTLP_1), GPIO_FN(OVCN2_1), - GPIO_FN(VBUS0_1), - - /* GPIO */ - GPIO_FN(GPI0), GPIO_FN(GPI1), GPIO_FN(GPO0), GPIO_FN(GPO1), - - /* BSC */ - GPIO_FN(BS), GPIO_FN(WE1), GPIO_FN(CKO), - GPIO_FN(WAIT), GPIO_FN(RDWR), - - GPIO_FN(A0), GPIO_FN(A1), GPIO_FN(A2), - GPIO_FN(A3), GPIO_FN(A6), GPIO_FN(A7), - GPIO_FN(A8), GPIO_FN(A9), GPIO_FN(A10), - GPIO_FN(A11), GPIO_FN(A12), GPIO_FN(A13), - GPIO_FN(A14), GPIO_FN(A15), GPIO_FN(A16), - GPIO_FN(A17), GPIO_FN(A18), GPIO_FN(A19), - GPIO_FN(A20), GPIO_FN(A21), GPIO_FN(A22), - GPIO_FN(A23), GPIO_FN(A24), GPIO_FN(A25), - GPIO_FN(A26), - - GPIO_FN(CS0), GPIO_FN(CS2), GPIO_FN(CS4), - GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(CS6A), - - /* BSC/FLCTL */ - GPIO_FN(RD_FSC), GPIO_FN(WE0_FWE), GPIO_FN(A4_FOE), - GPIO_FN(A5_FCDE), GPIO_FN(D0_NAF0), GPIO_FN(D1_NAF1), - GPIO_FN(D2_NAF2), GPIO_FN(D3_NAF3), GPIO_FN(D4_NAF4), - GPIO_FN(D5_NAF5), GPIO_FN(D6_NAF6), GPIO_FN(D7_NAF7), - GPIO_FN(D8_NAF8), GPIO_FN(D9_NAF9), GPIO_FN(D10_NAF10), - GPIO_FN(D11_NAF11), GPIO_FN(D12_NAF12), GPIO_FN(D13_NAF13), - GPIO_FN(D14_NAF14), GPIO_FN(D15_NAF15), - - /* MMCIF(1) */ - GPIO_FN(MMCD0_0), GPIO_FN(MMCD0_1), GPIO_FN(MMCD0_2), - GPIO_FN(MMCD0_3), GPIO_FN(MMCD0_4), GPIO_FN(MMCD0_5), - GPIO_FN(MMCD0_6), GPIO_FN(MMCD0_7), GPIO_FN(MMCCMD0), - GPIO_FN(MMCCLK0), - - /* MMCIF(2) */ - GPIO_FN(MMCD1_0), GPIO_FN(MMCD1_1), GPIO_FN(MMCD1_2), - GPIO_FN(MMCD1_3), GPIO_FN(MMCD1_4), GPIO_FN(MMCD1_5), - GPIO_FN(MMCD1_6), GPIO_FN(MMCD1_7), GPIO_FN(MMCCLK1), - GPIO_FN(MMCCMD1), - - /* SPU2 */ - GPIO_FN(VINT_I), - - /* FLCTL */ - GPIO_FN(FCE1), GPIO_FN(FCE0), GPIO_FN(FRB), - - /* HSI */ - GPIO_FN(GP_RX_FLAG), GPIO_FN(GP_RX_DATA), GPIO_FN(GP_TX_READY), - GPIO_FN(GP_RX_WAKE), GPIO_FN(MP_TX_FLAG), GPIO_FN(MP_TX_DATA), - GPIO_FN(MP_RX_READY), GPIO_FN(MP_TX_WAKE), - - /* MFI */ - GPIO_FN(MFIv6), - GPIO_FN(MFIv4), - - GPIO_FN(MEMC_BUSCLK_MEMC_A0), GPIO_FN(MEMC_ADV_MEMC_DREQ0), - GPIO_FN(MEMC_WAIT_MEMC_DREQ1), GPIO_FN(MEMC_CS1_MEMC_A1), - GPIO_FN(MEMC_CS0), GPIO_FN(MEMC_NOE), - GPIO_FN(MEMC_NWE), GPIO_FN(MEMC_INT), - - GPIO_FN(MEMC_AD0), GPIO_FN(MEMC_AD1), GPIO_FN(MEMC_AD2), - GPIO_FN(MEMC_AD3), GPIO_FN(MEMC_AD4), GPIO_FN(MEMC_AD5), - GPIO_FN(MEMC_AD6), GPIO_FN(MEMC_AD7), GPIO_FN(MEMC_AD8), - GPIO_FN(MEMC_AD9), GPIO_FN(MEMC_AD10), GPIO_FN(MEMC_AD11), - GPIO_FN(MEMC_AD12), GPIO_FN(MEMC_AD13), GPIO_FN(MEMC_AD14), - GPIO_FN(MEMC_AD15), - - /* SIM */ - GPIO_FN(SIM_RST), GPIO_FN(SIM_CLK), GPIO_FN(SIM_D), - - /* TPU */ - GPIO_FN(TPU0TO0), GPIO_FN(TPU0TO1), GPIO_FN(TPU0TO2_93), - GPIO_FN(TPU0TO2_99), GPIO_FN(TPU0TO3), - - /* I2C2 */ - GPIO_FN(I2C_SCL2), GPIO_FN(I2C_SDA2), - - /* I2C3(1) */ - GPIO_FN(I2C_SCL3), GPIO_FN(I2C_SDA3), - - /* I2C3(2) */ - GPIO_FN(I2C_SCL3S), GPIO_FN(I2C_SDA3S), - - /* I2C4(2) */ - GPIO_FN(I2C_SCL4), GPIO_FN(I2C_SDA4), - - /* I2C4(2) */ - GPIO_FN(I2C_SCL4S), GPIO_FN(I2C_SDA4S), - - /* KEYSC */ - GPIO_FN(KEYOUT0), GPIO_FN(KEYIN0_121), GPIO_FN(KEYIN0_136), - GPIO_FN(KEYOUT1), GPIO_FN(KEYIN1_122), GPIO_FN(KEYIN1_135), - GPIO_FN(KEYOUT2), GPIO_FN(KEYIN2_123), GPIO_FN(KEYIN2_134), - GPIO_FN(KEYOUT3), GPIO_FN(KEYIN3_124), GPIO_FN(KEYIN3_133), - GPIO_FN(KEYOUT4), GPIO_FN(KEYIN4), GPIO_FN(KEYOUT5), - GPIO_FN(KEYIN5), GPIO_FN(KEYOUT6), GPIO_FN(KEYIN6), - GPIO_FN(KEYOUT7), GPIO_FN(KEYIN7), - - /* LCDC */ - GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDVSYN), - GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(LCDRD), - GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(LCDLCLK), - GPIO_FN(LCDDON), - - GPIO_FN(LCDD0), GPIO_FN(LCDD1), GPIO_FN(LCDD2), - GPIO_FN(LCDD3), GPIO_FN(LCDD4), GPIO_FN(LCDD5), - GPIO_FN(LCDD6), GPIO_FN(LCDD7), GPIO_FN(LCDD8), - GPIO_FN(LCDD9), GPIO_FN(LCDD10), GPIO_FN(LCDD11), - GPIO_FN(LCDD12), GPIO_FN(LCDD13), GPIO_FN(LCDD14), - GPIO_FN(LCDD15), GPIO_FN(LCDD16), GPIO_FN(LCDD17), - GPIO_FN(LCDD18), GPIO_FN(LCDD19), GPIO_FN(LCDD20), - GPIO_FN(LCDD21), GPIO_FN(LCDD22), GPIO_FN(LCDD23), - - GPIO_FN(LCDC0_SELECT), - GPIO_FN(LCDC1_SELECT), - - /* IRDA */ - GPIO_FN(IRDA_OUT), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL), - GPIO_FN(IROUT_139), GPIO_FN(IROUT_140), - - /* TSIF1 */ - GPIO_FN(TS0_1SELECT), - GPIO_FN(TS0_2SELECT), - GPIO_FN(TS1_1SELECT), - GPIO_FN(TS1_2SELECT), - - GPIO_FN(TS_SPSYNC1), GPIO_FN(TS_SDAT1), - GPIO_FN(TS_SDEN1), GPIO_FN(TS_SCK1), - - /* TSIF2 */ - GPIO_FN(TS_SPSYNC2), GPIO_FN(TS_SDAT2), - GPIO_FN(TS_SDEN2), GPIO_FN(TS_SCK2), - - /* HDMI */ - GPIO_FN(HDMI_HPD), GPIO_FN(HDMI_CEC), - - /* SDHI0 */ - GPIO_FN(SDHICLK0), GPIO_FN(SDHICD0), GPIO_FN(SDHICMD0), - GPIO_FN(SDHIWP0), GPIO_FN(SDHID0_0), GPIO_FN(SDHID0_1), - GPIO_FN(SDHID0_2), GPIO_FN(SDHID0_3), - - /* SDHI1 */ - GPIO_FN(SDHICLK1), GPIO_FN(SDHICMD1), GPIO_FN(SDHID1_0), - GPIO_FN(SDHID1_1), GPIO_FN(SDHID1_2), GPIO_FN(SDHID1_3), - - /* SDHI2 */ - GPIO_FN(SDHICLK2), GPIO_FN(SDHICMD2), GPIO_FN(SDHID2_0), - GPIO_FN(SDHID2_1), GPIO_FN(SDHID2_2), GPIO_FN(SDHID2_3), - - /* SDENC */ - GPIO_FN(SDENC_CPG), - GPIO_FN(SDENC_DV_CLKI), -}; - -static struct pinmux_cfg_reg pinmux_config_regs[] = { - PORTCR(0, 0xE6051000), /* PORT0CR */ - PORTCR(1, 0xE6051001), /* PORT1CR */ - PORTCR(2, 0xE6051002), /* PORT2CR */ - PORTCR(3, 0xE6051003), /* PORT3CR */ - PORTCR(4, 0xE6051004), /* PORT4CR */ - PORTCR(5, 0xE6051005), /* PORT5CR */ - PORTCR(6, 0xE6051006), /* PORT6CR */ - PORTCR(7, 0xE6051007), /* PORT7CR */ - PORTCR(8, 0xE6051008), /* PORT8CR */ - PORTCR(9, 0xE6051009), /* PORT9CR */ - PORTCR(10, 0xE605100A), /* PORT10CR */ - PORTCR(11, 0xE605100B), /* PORT11CR */ - PORTCR(12, 0xE605100C), /* PORT12CR */ - PORTCR(13, 0xE605100D), /* PORT13CR */ - PORTCR(14, 0xE605100E), /* PORT14CR */ - PORTCR(15, 0xE605100F), /* PORT15CR */ - PORTCR(16, 0xE6051010), /* PORT16CR */ - PORTCR(17, 0xE6051011), /* PORT17CR */ - PORTCR(18, 0xE6051012), /* PORT18CR */ - PORTCR(19, 0xE6051013), /* PORT19CR */ - PORTCR(20, 0xE6051014), /* PORT20CR */ - PORTCR(21, 0xE6051015), /* PORT21CR */ - PORTCR(22, 0xE6051016), /* PORT22CR */ - PORTCR(23, 0xE6051017), /* PORT23CR */ - PORTCR(24, 0xE6051018), /* PORT24CR */ - PORTCR(25, 0xE6051019), /* PORT25CR */ - PORTCR(26, 0xE605101A), /* PORT26CR */ - PORTCR(27, 0xE605101B), /* PORT27CR */ - PORTCR(28, 0xE605101C), /* PORT28CR */ - PORTCR(29, 0xE605101D), /* PORT29CR */ - PORTCR(30, 0xE605101E), /* PORT30CR */ - PORTCR(31, 0xE605101F), /* PORT31CR */ - PORTCR(32, 0xE6051020), /* PORT32CR */ - PORTCR(33, 0xE6051021), /* PORT33CR */ - PORTCR(34, 0xE6051022), /* PORT34CR */ - PORTCR(35, 0xE6051023), /* PORT35CR */ - PORTCR(36, 0xE6051024), /* PORT36CR */ - PORTCR(37, 0xE6051025), /* PORT37CR */ - PORTCR(38, 0xE6051026), /* PORT38CR */ - PORTCR(39, 0xE6051027), /* PORT39CR */ - PORTCR(40, 0xE6051028), /* PORT40CR */ - PORTCR(41, 0xE6051029), /* PORT41CR */ - PORTCR(42, 0xE605102A), /* PORT42CR */ - PORTCR(43, 0xE605102B), /* PORT43CR */ - PORTCR(44, 0xE605102C), /* PORT44CR */ - PORTCR(45, 0xE605102D), /* PORT45CR */ - PORTCR(46, 0xE605202E), /* PORT46CR */ - PORTCR(47, 0xE605202F), /* PORT47CR */ - PORTCR(48, 0xE6052030), /* PORT48CR */ - PORTCR(49, 0xE6052031), /* PORT49CR */ - PORTCR(50, 0xE6052032), /* PORT50CR */ - PORTCR(51, 0xE6052033), /* PORT51CR */ - PORTCR(52, 0xE6052034), /* PORT52CR */ - PORTCR(53, 0xE6052035), /* PORT53CR */ - PORTCR(54, 0xE6052036), /* PORT54CR */ - PORTCR(55, 0xE6052037), /* PORT55CR */ - PORTCR(56, 0xE6052038), /* PORT56CR */ - PORTCR(57, 0xE6052039), /* PORT57CR */ - PORTCR(58, 0xE605203A), /* PORT58CR */ - PORTCR(59, 0xE605203B), /* PORT59CR */ - PORTCR(60, 0xE605203C), /* PORT60CR */ - PORTCR(61, 0xE605203D), /* PORT61CR */ - PORTCR(62, 0xE605203E), /* PORT62CR */ - PORTCR(63, 0xE605203F), /* PORT63CR */ - PORTCR(64, 0xE6052040), /* PORT64CR */ - PORTCR(65, 0xE6052041), /* PORT65CR */ - PORTCR(66, 0xE6052042), /* PORT66CR */ - PORTCR(67, 0xE6052043), /* PORT67CR */ - PORTCR(68, 0xE6052044), /* PORT68CR */ - PORTCR(69, 0xE6052045), /* PORT69CR */ - PORTCR(70, 0xE6052046), /* PORT70CR */ - PORTCR(71, 0xE6052047), /* PORT71CR */ - PORTCR(72, 0xE6052048), /* PORT72CR */ - PORTCR(73, 0xE6052049), /* PORT73CR */ - PORTCR(74, 0xE605204A), /* PORT74CR */ - PORTCR(75, 0xE605204B), /* PORT75CR */ - PORTCR(76, 0xE605004C), /* PORT76CR */ - PORTCR(77, 0xE605004D), /* PORT77CR */ - PORTCR(78, 0xE605004E), /* PORT78CR */ - PORTCR(79, 0xE605004F), /* PORT79CR */ - PORTCR(80, 0xE6050050), /* PORT80CR */ - PORTCR(81, 0xE6050051), /* PORT81CR */ - PORTCR(82, 0xE6050052), /* PORT82CR */ - PORTCR(83, 0xE6050053), /* PORT83CR */ - PORTCR(84, 0xE6050054), /* PORT84CR */ - PORTCR(85, 0xE6050055), /* PORT85CR */ - PORTCR(86, 0xE6050056), /* PORT86CR */ - PORTCR(87, 0xE6050057), /* PORT87CR */ - PORTCR(88, 0xE6050058), /* PORT88CR */ - PORTCR(89, 0xE6050059), /* PORT89CR */ - PORTCR(90, 0xE605005A), /* PORT90CR */ - PORTCR(91, 0xE605005B), /* PORT91CR */ - PORTCR(92, 0xE605005C), /* PORT92CR */ - PORTCR(93, 0xE605005D), /* PORT93CR */ - PORTCR(94, 0xE605005E), /* PORT94CR */ - PORTCR(95, 0xE605005F), /* PORT95CR */ - PORTCR(96, 0xE6050060), /* PORT96CR */ - PORTCR(97, 0xE6050061), /* PORT97CR */ - PORTCR(98, 0xE6050062), /* PORT98CR */ - PORTCR(99, 0xE6050063), /* PORT99CR */ - PORTCR(100, 0xE6053064), /* PORT100CR */ - PORTCR(101, 0xE6053065), /* PORT101CR */ - PORTCR(102, 0xE6053066), /* PORT102CR */ - PORTCR(103, 0xE6053067), /* PORT103CR */ - PORTCR(104, 0xE6053068), /* PORT104CR */ - PORTCR(105, 0xE6053069), /* PORT105CR */ - PORTCR(106, 0xE605306A), /* PORT106CR */ - PORTCR(107, 0xE605306B), /* PORT107CR */ - PORTCR(108, 0xE605306C), /* PORT108CR */ - PORTCR(109, 0xE605306D), /* PORT109CR */ - PORTCR(110, 0xE605306E), /* PORT110CR */ - PORTCR(111, 0xE605306F), /* PORT111CR */ - PORTCR(112, 0xE6053070), /* PORT112CR */ - PORTCR(113, 0xE6053071), /* PORT113CR */ - PORTCR(114, 0xE6053072), /* PORT114CR */ - PORTCR(115, 0xE6053073), /* PORT115CR */ - PORTCR(116, 0xE6053074), /* PORT116CR */ - PORTCR(117, 0xE6053075), /* PORT117CR */ - PORTCR(118, 0xE6053076), /* PORT118CR */ - PORTCR(119, 0xE6053077), /* PORT119CR */ - PORTCR(120, 0xE6053078), /* PORT120CR */ - PORTCR(121, 0xE6050079), /* PORT121CR */ - PORTCR(122, 0xE605007A), /* PORT122CR */ - PORTCR(123, 0xE605007B), /* PORT123CR */ - PORTCR(124, 0xE605007C), /* PORT124CR */ - PORTCR(125, 0xE605007D), /* PORT125CR */ - PORTCR(126, 0xE605007E), /* PORT126CR */ - PORTCR(127, 0xE605007F), /* PORT127CR */ - PORTCR(128, 0xE6050080), /* PORT128CR */ - PORTCR(129, 0xE6050081), /* PORT129CR */ - PORTCR(130, 0xE6050082), /* PORT130CR */ - PORTCR(131, 0xE6050083), /* PORT131CR */ - PORTCR(132, 0xE6050084), /* PORT132CR */ - PORTCR(133, 0xE6050085), /* PORT133CR */ - PORTCR(134, 0xE6050086), /* PORT134CR */ - PORTCR(135, 0xE6050087), /* PORT135CR */ - PORTCR(136, 0xE6050088), /* PORT136CR */ - PORTCR(137, 0xE6050089), /* PORT137CR */ - PORTCR(138, 0xE605008A), /* PORT138CR */ - PORTCR(139, 0xE605008B), /* PORT139CR */ - PORTCR(140, 0xE605008C), /* PORT140CR */ - PORTCR(141, 0xE605008D), /* PORT141CR */ - PORTCR(142, 0xE605008E), /* PORT142CR */ - PORTCR(143, 0xE605008F), /* PORT143CR */ - PORTCR(144, 0xE6050090), /* PORT144CR */ - PORTCR(145, 0xE6050091), /* PORT145CR */ - PORTCR(146, 0xE6050092), /* PORT146CR */ - PORTCR(147, 0xE6050093), /* PORT147CR */ - PORTCR(148, 0xE6050094), /* PORT148CR */ - PORTCR(149, 0xE6050095), /* PORT149CR */ - PORTCR(150, 0xE6050096), /* PORT150CR */ - PORTCR(151, 0xE6050097), /* PORT151CR */ - PORTCR(152, 0xE6053098), /* PORT152CR */ - PORTCR(153, 0xE6053099), /* PORT153CR */ - PORTCR(154, 0xE605309A), /* PORT154CR */ - PORTCR(155, 0xE605309B), /* PORT155CR */ - PORTCR(156, 0xE605009C), /* PORT156CR */ - PORTCR(157, 0xE605009D), /* PORT157CR */ - PORTCR(158, 0xE605009E), /* PORT158CR */ - PORTCR(159, 0xE605009F), /* PORT159CR */ - PORTCR(160, 0xE60500A0), /* PORT160CR */ - PORTCR(161, 0xE60500A1), /* PORT161CR */ - PORTCR(162, 0xE60500A2), /* PORT162CR */ - PORTCR(163, 0xE60500A3), /* PORT163CR */ - PORTCR(164, 0xE60500A4), /* PORT164CR */ - PORTCR(165, 0xE60500A5), /* PORT165CR */ - PORTCR(166, 0xE60500A6), /* PORT166CR */ - PORTCR(167, 0xE60520A7), /* PORT167CR */ - PORTCR(168, 0xE60520A8), /* PORT168CR */ - PORTCR(169, 0xE60520A9), /* PORT169CR */ - PORTCR(170, 0xE60520AA), /* PORT170CR */ - PORTCR(171, 0xE60520AB), /* PORT171CR */ - PORTCR(172, 0xE60520AC), /* PORT172CR */ - PORTCR(173, 0xE60520AD), /* PORT173CR */ - PORTCR(174, 0xE60520AE), /* PORT174CR */ - PORTCR(175, 0xE60520AF), /* PORT175CR */ - PORTCR(176, 0xE60520B0), /* PORT176CR */ - PORTCR(177, 0xE60520B1), /* PORT177CR */ - PORTCR(178, 0xE60520B2), /* PORT178CR */ - PORTCR(179, 0xE60520B3), /* PORT179CR */ - PORTCR(180, 0xE60520B4), /* PORT180CR */ - PORTCR(181, 0xE60520B5), /* PORT181CR */ - PORTCR(182, 0xE60520B6), /* PORT182CR */ - PORTCR(183, 0xE60520B7), /* PORT183CR */ - PORTCR(184, 0xE60520B8), /* PORT184CR */ - PORTCR(185, 0xE60520B9), /* PORT185CR */ - PORTCR(186, 0xE60520BA), /* PORT186CR */ - PORTCR(187, 0xE60520BB), /* PORT187CR */ - PORTCR(188, 0xE60520BC), /* PORT188CR */ - PORTCR(189, 0xE60520BD), /* PORT189CR */ - PORTCR(190, 0xE60520BE), /* PORT190CR */ - - { PINMUX_CFG_REG("MSEL1CR", 0xE605800C, 32, 1) { - MSEL1CR_31_0, MSEL1CR_31_1, - MSEL1CR_30_0, MSEL1CR_30_1, - MSEL1CR_29_0, MSEL1CR_29_1, - MSEL1CR_28_0, MSEL1CR_28_1, - MSEL1CR_27_0, MSEL1CR_27_1, - MSEL1CR_26_0, MSEL1CR_26_1, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - MSEL1CR_16_0, MSEL1CR_16_1, - MSEL1CR_15_0, MSEL1CR_15_1, - MSEL1CR_14_0, MSEL1CR_14_1, - MSEL1CR_13_0, MSEL1CR_13_1, - MSEL1CR_12_0, MSEL1CR_12_1, - 0, 0, 0, 0, - MSEL1CR_9_0, MSEL1CR_9_1, - MSEL1CR_8_0, MSEL1CR_8_1, - MSEL1CR_7_0, MSEL1CR_7_1, - MSEL1CR_6_0, MSEL1CR_6_1, - 0, 0, - MSEL1CR_4_0, MSEL1CR_4_1, - MSEL1CR_3_0, MSEL1CR_3_1, - MSEL1CR_2_0, MSEL1CR_2_1, - 0, 0, - MSEL1CR_0_0, MSEL1CR_0_1, - } - }, - { PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) { - 0, 0, 0, 0, - 0, 0, 0, 0, - MSEL3CR_27_0, MSEL3CR_27_1, - MSEL3CR_26_0, MSEL3CR_26_1, - 0, 0, 0, 0, - 0, 0, 0, 0, - MSEL3CR_21_0, MSEL3CR_21_1, - MSEL3CR_20_0, MSEL3CR_20_1, - 0, 0, 0, 0, - 0, 0, 0, 0, - MSEL3CR_15_0, MSEL3CR_15_1, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, - MSEL3CR_9_0, MSEL3CR_9_1, - 0, 0, 0, 0, - MSEL3CR_6_0, MSEL3CR_6_1, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - } - }, - { PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - MSEL4CR_19_0, MSEL4CR_19_1, - MSEL4CR_18_0, MSEL4CR_18_1, - MSEL4CR_17_0, MSEL4CR_17_1, - MSEL4CR_16_0, MSEL4CR_16_1, - MSEL4CR_15_0, MSEL4CR_15_1, - MSEL4CR_14_0, MSEL4CR_14_1, - 0, 0, 0, 0, - 0, 0, - MSEL4CR_10_0, MSEL4CR_10_1, - 0, 0, 0, 0, - 0, 0, - MSEL4CR_6_0, MSEL4CR_6_1, - 0, 0, - MSEL4CR_4_0, MSEL4CR_4_1, - 0, 0, 0, 0, - MSEL4CR_1_0, MSEL4CR_1_1, - 0, 0, - } - }, - { }, -}; - -static struct pinmux_data_reg pinmux_data_regs[] = { - { PINMUX_DATA_REG("PORTL095_064DR", 0xE6054008, 32) { - PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, - PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, - PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, - PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, - PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - } - }, - { PINMUX_DATA_REG("PORTL127_096DR", 0xE605400C, 32) { - PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA, - PORT123_DATA, PORT122_DATA, PORT121_DATA, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA, - } - }, - { PINMUX_DATA_REG("PORTL159_128DR", 0xE6054010, 32) { - PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, - 0, 0, 0, 0, - PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, - PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, - PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, - PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, - PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, - PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA, - } - }, - { PINMUX_DATA_REG("PORTL191_160DR", 0xE6054014, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, PORT166_DATA, PORT165_DATA, PORT164_DATA, - PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA, - } - }, - { PINMUX_DATA_REG("PORTD031_000DR", 0xE6055000, 32) { - PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, - PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, - PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, - PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, - PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, - PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, - PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, - PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA, - } - }, - { PINMUX_DATA_REG("PORTD063_032DR", 0xE6055004, 32) { - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, PORT45_DATA, PORT44_DATA, - PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, - PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, - PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA, - } - }, - { PINMUX_DATA_REG("PORTR063_032DR", 0xE6056004, 32) { - PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, - PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, - PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, - PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, - PORT47_DATA, PORT46_DATA, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - } - }, - { PINMUX_DATA_REG("PORTR095_064DR", 0xE6056008, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, - PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, - PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA, - } - }, - { PINMUX_DATA_REG("PORTR191_160DR", 0xE6056014, 32) { - 0, PORT190_DATA, PORT189_DATA, PORT188_DATA, - PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA, - PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA, - PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA, - PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA, - PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA, - PORT167_DATA, 0, 0, 0, - 0, 0, 0, 0, - } - }, - { PINMUX_DATA_REG("PORTU127_096DR", 0xE605700C, 32) { - 0, 0, 0, 0, - 0, 0, 0, PORT120_DATA, - PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA, - PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, - PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, - PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, - PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, - 0, 0, 0, 0, - } - }, - { PINMUX_DATA_REG("PORTU159_128DR", 0xE6057010, 32) { - 0, 0, 0, 0, - PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - } - }, - { }, -}; - -#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) -#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) -static struct pinmux_irq pinmux_irqs[] = { - PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), - PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), - PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), - PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), - PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), - PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), - PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), - PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), - PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), - PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), - PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), - PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), - PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), - PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), - PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), - PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), - PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), - PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), - PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), - PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), - PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), - PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), - PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), - PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), - PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), - PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), - PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), - PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), - PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), - PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), - PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), - PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), -}; - -static struct pinmux_info sh7372_pinmux_info = { - .name = "sh7372_pfc", - .reserved_id = PINMUX_RESERVED, - .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, - .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, - .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, - .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, - - .first_gpio = GPIO_PORT0, - .last_gpio = GPIO_FN_SDENC_DV_CLKI, - - .gpios = pinmux_gpios, - .cfg_regs = pinmux_config_regs, - .data_regs = pinmux_data_regs, - - .gpio_data = pinmux_data, - .gpio_data_size = ARRAY_SIZE(pinmux_data), - - .gpio_irq = pinmux_irqs, - .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), -}; - -void sh7372_pinmux_init(void) -{ - register_pinmux(&sh7372_pinmux_info); -} diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c deleted file mode 100644 index b442f9d..0000000 --- a/arch/arm/mach-shmobile/pfc-sh73a0.c +++ /dev/null @@ -1,2803 +0,0 @@ -/* - * sh73a0 processor support - PFC hardware block - * - * Copyright (C) 2010 Renesas Solutions Corp. - * Copyright (C) 2010 NISHIMOTO Hiroki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the - * License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sh_pfc.h> -#include <mach/sh73a0.h> -#include <mach/irqs.h> - -#define CPU_ALL_PORT(fn, pfx, sfx) \ - PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \ - PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx), \ - PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx), \ - PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx), \ - PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx), \ - PORT_10(fn, pfx##10, sfx), \ - PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \ - PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \ - PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \ - PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \ - PORT_1(fn, pfx##118, sfx), \ - PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \ - PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \ - PORT_10(fn, pfx##15, sfx), \ - PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \ - PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \ - PORT_1(fn, pfx##164, sfx), \ - PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \ - PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \ - PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \ - PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \ - PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \ - PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \ - PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \ - PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx), \ - PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx), \ - PORT_1(fn, pfx##282, sfx), \ - PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx), \ - PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx) - -enum { - PINMUX_RESERVED = 0, - - PINMUX_DATA_BEGIN, - PORT_ALL(DATA), /* PORT0_DATA -> PORT309_DATA */ - PINMUX_DATA_END, - - PINMUX_INPUT_BEGIN, - PORT_ALL(IN), /* PORT0_IN -> PORT309_IN */ - PINMUX_INPUT_END, - - PINMUX_INPUT_PULLUP_BEGIN, - PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */ - PINMUX_INPUT_PULLUP_END, - - PINMUX_INPUT_PULLDOWN_BEGIN, - PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */ - PINMUX_INPUT_PULLDOWN_END, - - PINMUX_OUTPUT_BEGIN, - PORT_ALL(OUT), /* PORT0_OUT -> PORT309_OUT */ - PINMUX_OUTPUT_END, - - PINMUX_FUNCTION_BEGIN, - PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */ - PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */ - PORT_ALL(FN0), /* PORT0_FN0 -> PORT309_FN0 */ - PORT_ALL(FN1), /* PORT0_FN1 -> PORT309_FN1 */ - PORT_ALL(FN2), /* PORT0_FN2 -> PORT309_FN2 */ - PORT_ALL(FN3), /* PORT0_FN3 -> PORT309_FN3 */ - PORT_ALL(FN4), /* PORT0_FN4 -> PORT309_FN4 */ - PORT_ALL(FN5), /* PORT0_FN5 -> PORT309_FN5 */ - PORT_ALL(FN6), /* PORT0_FN6 -> PORT309_FN6 */ - PORT_ALL(FN7), /* PORT0_FN7 -> PORT309_FN7 */ - - MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1, - MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1, - MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1, - MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1, - MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1, - MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1, - MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1, - MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1, - MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1, - MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1, - MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1, - MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1, - MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1, - MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1, - MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1, - MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1, - MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1, - MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1, - MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1, - MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1, - MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1, - MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1, - MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1, - MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1, - MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1, - MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1, - MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1, - MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1, - MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1, - MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1, - MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1, - MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1, - MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1, - MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1, - MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1, - MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1, - MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1, - MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1, - MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1, - MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1, - MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1, - MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1, - PINMUX_FUNCTION_END, - - PINMUX_MARK_BEGIN, - /* Hardware manual Table 25-1 (Function 0-7) */ - VBUS_0_MARK, - GPI0_MARK, - GPI1_MARK, - GPI2_MARK, - GPI3_MARK, - GPI4_MARK, - GPI5_MARK, - GPI6_MARK, - GPI7_MARK, - SCIFA7_RXD_MARK, - SCIFA7_CTS__MARK, - GPO7_MARK, MFG0_OUT2_MARK, - GPO6_MARK, MFG1_OUT2_MARK, - GPO5_MARK, SCIFA0_SCK_MARK, FSICOSLDT3_MARK, PORT16_VIO_CKOR_MARK, - SCIFA0_TXD_MARK, - SCIFA7_TXD_MARK, - SCIFA7_RTS__MARK, PORT19_VIO_CKO2_MARK, - GPO0_MARK, - GPO1_MARK, - GPO2_MARK, STATUS0_MARK, - GPO3_MARK, STATUS1_MARK, - GPO4_MARK, STATUS2_MARK, - VINT_MARK, - TCKON_MARK, - XDVFS1_MARK, PORT27_I2C_SCL2_MARK, PORT27_I2C_SCL3_MARK, \ - MFG0_OUT1_MARK, PORT27_IROUT_MARK, - XDVFS2_MARK, PORT28_I2C_SDA2_MARK, PORT28_I2C_SDA3_MARK, \ - PORT28_TPU1TO1_MARK, - SIM_RST_MARK, PORT29_TPU1TO1_MARK, - SIM_CLK_MARK, PORT30_VIO_CKOR_MARK, - SIM_D_MARK, PORT31_IROUT_MARK, - SCIFA4_TXD_MARK, - SCIFA4_RXD_MARK, XWUP_MARK, - SCIFA4_RTS__MARK, - SCIFA4_CTS__MARK, - FSIBOBT_MARK, FSIBIBT_MARK, - FSIBOLR_MARK, FSIBILR_MARK, - FSIBOSLD_MARK, - FSIBISLD_MARK, - VACK_MARK, - XTAL1L_MARK, - SCIFA0_RTS__MARK, FSICOSLDT2_MARK, - SCIFA0_RXD_MARK, - SCIFA0_CTS__MARK, FSICOSLDT1_MARK, - FSICOBT_MARK, FSICIBT_MARK, FSIDOBT_MARK, FSIDIBT_MARK, - FSICOLR_MARK, FSICILR_MARK, FSIDOLR_MARK, FSIDILR_MARK, - FSICOSLD_MARK, PORT47_FSICSPDIF_MARK, - FSICISLD_MARK, FSIDISLD_MARK, - FSIACK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, FSIAOMC_MARK, - FSIAOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, FSIAILR_MARK, - - FSIAOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, FSIAIBT_MARK, - FSIAOSLD_MARK, BBIF2_TXD2_MARK, - FSIASPDIF_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, FSIBSPDIF_MARK, \ - PORT53_FSICSPDIF_MARK, - FSIBCK_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FSIBOMC_MARK, \ - FSICCK_MARK, FSICOMC_MARK, - FSIAISLD_MARK, TPU0TO0_MARK, - A0_MARK, BS__MARK, - A12_MARK, PORT58_KEYOUT7_MARK, TPU4TO2_MARK, - A13_MARK, PORT59_KEYOUT6_MARK, TPU0TO1_MARK, - A14_MARK, KEYOUT5_MARK, - A15_MARK, KEYOUT4_MARK, - A16_MARK, KEYOUT3_MARK, MSIOF0_SS1_MARK, - A17_MARK, KEYOUT2_MARK, MSIOF0_TSYNC_MARK, - A18_MARK, KEYOUT1_MARK, MSIOF0_TSCK_MARK, - A19_MARK, KEYOUT0_MARK, MSIOF0_TXD_MARK, - A20_MARK, KEYIN0_MARK, MSIOF0_RSCK_MARK, - A21_MARK, KEYIN1_MARK, MSIOF0_RSYNC_MARK, - A22_MARK, KEYIN2_MARK, MSIOF0_MCK0_MARK, - A23_MARK, KEYIN3_MARK, MSIOF0_MCK1_MARK, - A24_MARK, KEYIN4_MARK, MSIOF0_RXD_MARK, - A25_MARK, KEYIN5_MARK, MSIOF0_SS2_MARK, - A26_MARK, KEYIN6_MARK, - KEYIN7_MARK, - D0_NAF0_MARK, - D1_NAF1_MARK, - D2_NAF2_MARK, - D3_NAF3_MARK, - D4_NAF4_MARK, - D5_NAF5_MARK, - D6_NAF6_MARK, - D7_NAF7_MARK, - D8_NAF8_MARK, - D9_NAF9_MARK, - D10_NAF10_MARK, - D11_NAF11_MARK, - D12_NAF12_MARK, - D13_NAF13_MARK, - D14_NAF14_MARK, - D15_NAF15_MARK, - CS4__MARK, - CS5A__MARK, PORT91_RDWR_MARK, - CS5B__MARK, FCE1__MARK, - CS6B__MARK, DACK0_MARK, - FCE0__MARK, CS6A__MARK, - WAIT__MARK, DREQ0_MARK, - RD__FSC_MARK, - WE0__FWE_MARK, RDWR_FWE_MARK, - WE1__MARK, - FRB_MARK, - CKO_MARK, - NBRSTOUT__MARK, - NBRST__MARK, - BBIF2_TXD_MARK, - BBIF2_RXD_MARK, - BBIF2_SYNC_MARK, - BBIF2_SCK_MARK, - SCIFA3_CTS__MARK, MFG3_IN2_MARK, - SCIFA3_RXD_MARK, MFG3_IN1_MARK, - BBIF1_SS2_MARK, SCIFA3_RTS__MARK, MFG3_OUT1_MARK, - SCIFA3_TXD_MARK, - HSI_RX_DATA_MARK, BBIF1_RXD_MARK, - HSI_TX_WAKE_MARK, BBIF1_TSCK_MARK, - HSI_TX_DATA_MARK, BBIF1_TSYNC_MARK, - HSI_TX_READY_MARK, BBIF1_TXD_MARK, - HSI_RX_READY_MARK, BBIF1_RSCK_MARK, PORT115_I2C_SCL2_MARK, \ - PORT115_I2C_SCL3_MARK, - HSI_RX_WAKE_MARK, BBIF1_RSYNC_MARK, PORT116_I2C_SDA2_MARK, \ - PORT116_I2C_SDA3_MARK, - HSI_RX_FLAG_MARK, BBIF1_SS1_MARK, BBIF1_FLOW_MARK, - HSI_TX_FLAG_MARK, - VIO_VD_MARK, PORT128_LCD2VSYN_MARK, VIO2_VD_MARK, LCD2D0_MARK, - - VIO_HD_MARK, PORT129_LCD2HSYN_MARK, PORT129_LCD2CS__MARK, \ - VIO2_HD_MARK, LCD2D1_MARK, - VIO_D0_MARK, PORT130_MSIOF2_RXD_MARK, LCD2D10_MARK, - VIO_D1_MARK, PORT131_KEYOUT6_MARK, PORT131_MSIOF2_SS1_MARK, \ - PORT131_KEYOUT11_MARK, LCD2D11_MARK, - VIO_D2_MARK, PORT132_KEYOUT7_MARK, PORT132_MSIOF2_SS2_MARK, \ - PORT132_KEYOUT10_MARK, LCD2D12_MARK, - VIO_D3_MARK, MSIOF2_TSYNC_MARK, LCD2D13_MARK, - VIO_D4_MARK, MSIOF2_TXD_MARK, LCD2D14_MARK, - VIO_D5_MARK, MSIOF2_TSCK_MARK, LCD2D15_MARK, - VIO_D6_MARK, PORT136_KEYOUT8_MARK, LCD2D16_MARK, - VIO_D7_MARK, PORT137_KEYOUT9_MARK, LCD2D17_MARK, - VIO_D8_MARK, PORT138_KEYOUT8_MARK, VIO2_D0_MARK, LCD2D6_MARK, - VIO_D9_MARK, PORT139_KEYOUT9_MARK, VIO2_D1_MARK, LCD2D7_MARK, - VIO_D10_MARK, TPU0TO2_MARK, VIO2_D2_MARK, LCD2D8_MARK, - VIO_D11_MARK, TPU0TO3_MARK, VIO2_D3_MARK, LCD2D9_MARK, - VIO_D12_MARK, PORT142_KEYOUT10_MARK, VIO2_D4_MARK, LCD2D2_MARK, - VIO_D13_MARK, PORT143_KEYOUT11_MARK, PORT143_KEYOUT6_MARK, \ - VIO2_D5_MARK, LCD2D3_MARK, - VIO_D14_MARK, PORT144_KEYOUT7_MARK, VIO2_D6_MARK, LCD2D4_MARK, - VIO_D15_MARK, TPU1TO3_MARK, PORT145_LCD2DISP_MARK, \ - PORT145_LCD2RS_MARK, VIO2_D7_MARK, LCD2D5_MARK, - VIO_CLK_MARK, LCD2DCK_MARK, PORT146_LCD2WR__MARK, VIO2_CLK_MARK, \ - LCD2D18_MARK, - VIO_FIELD_MARK, LCD2RD__MARK, VIO2_FIELD_MARK, LCD2D19_MARK, - VIO_CKO_MARK, - A27_MARK, PORT149_RDWR_MARK, MFG0_IN1_MARK, PORT149_KEYOUT9_MARK, - MFG0_IN2_MARK, - TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK, - TS_SDAT3_MARK, MSIOF2_RSYNC_MARK, - TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK, - SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK, - SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK, - SCIFA2_RTS1__MARK, PORT156_MSIOF2_SS2_MARK, - SCIFA2_CTS1__MARK, PORT157_MSIOF2_RXD_MARK, - DINT__MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK, - PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK, - PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, - PORT161_SCIFB_CTS__MARK, PORT161_SCIFA5_CTS__MARK, - PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, - PORT163_SCIFB_RTS__MARK, PORT163_SCIFA5_RTS__MARK, TPU3TO0_MARK, - LCDD0_MARK, - LCDD1_MARK, PORT193_SCIFA5_CTS__MARK, BBIF2_TSYNC1_MARK, - LCDD2_MARK, PORT194_SCIFA5_RTS__MARK, BBIF2_TSCK1_MARK, - LCDD3_MARK, PORT195_SCIFA5_RXD_MARK, BBIF2_TXD1_MARK, - LCDD4_MARK, PORT196_SCIFA5_TXD_MARK, - LCDD5_MARK, PORT197_SCIFA5_SCK_MARK, MFG2_OUT2_MARK, TPU2TO1_MARK, - LCDD6_MARK, - LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, - LCDD8_MARK, D16_MARK, - LCDD9_MARK, D17_MARK, - LCDD10_MARK, D18_MARK, - LCDD11_MARK, D19_MARK, - LCDD12_MARK, D20_MARK, - LCDD13_MARK, D21_MARK, - LCDD14_MARK, D22_MARK, - LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, D23_MARK, - LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, D24_MARK, - LCDD17_MARK, D25_MARK, - LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, - LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, - LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, - LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, - LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, - LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, - LCDDCK_MARK, LCDWR__MARK, - LCDRD__MARK, DACK2_MARK, PORT217_LCD2RS_MARK, MSIOF0L_TSYNC_MARK, \ - VIO2_FIELD3_MARK, PORT217_LCD2DISP_MARK, - LCDHSYN_MARK, LCDCS__MARK, LCDCS2__MARK, DACK3_MARK, \ - PORT218_VIO_CKOR_MARK, - LCDDISP_MARK, LCDRS_MARK, PORT219_LCD2WR__MARK, DREQ3_MARK, \ - MSIOF0L_TSCK_MARK, VIO2_CLK3_MARK, LCD2DCK_2_MARK, - LCDVSYN_MARK, LCDVSYN2_MARK, - LCDLCLK_MARK, DREQ1_MARK, PORT221_LCD2CS__MARK, PWEN_MARK, \ - MSIOF0L_RXD_MARK, VIO2_HD3_MARK, PORT221_LCD2HSYN_MARK, - LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, \ - VIO2_VD3_MARK, PORT222_LCD2VSYN_MARK, - - SCIFA1_TXD_MARK, OVCN2_MARK, - EXTLP_MARK, SCIFA1_SCK_MARK, PORT226_VIO_CKO2_MARK, - SCIFA1_RTS__MARK, IDIN_MARK, - SCIFA1_RXD_MARK, - SCIFA1_CTS__MARK, MFG1_IN1_MARK, - MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, - MSIOF1_TSYNC_MARK, SCIFA2_CTS2__MARK, - MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, - MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, - MSIOF1_RSCK_MARK, SCIFA2_RTS2__MARK, VIO2_CLK2_MARK, LCD2D20_MARK, - MSIOF1_RSYNC_MARK, MFG1_IN2_MARK, VIO2_VD2_MARK, LCD2D21_MARK, - MSIOF1_MCK0_MARK, PORT236_I2C_SDA2_MARK, - MSIOF1_MCK1_MARK, PORT237_I2C_SCL2_MARK, - MSIOF1_SS1_MARK, VIO2_FIELD2_MARK, LCD2D22_MARK, - MSIOF1_SS2_MARK, VIO2_HD2_MARK, LCD2D23_MARK, - SCIFA6_TXD_MARK, - PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, TPU4TO0_MARK, - PORT242_IRDA_IN_MARK, MFG4_IN2_MARK, - PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK, - PORT244_SCIFA5_CTS__MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS__MARK, \ - MSIOF2R_RXD_MARK, - PORT245_SCIFA5_RTS__MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS__MARK, \ - MSIOF2R_TXD_MARK, - PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, \ - TPU1TO0_MARK, - PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, \ - TPU3TO1_MARK, - PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, \ - TPU2TO0_MARK, PORT248_I2C_SCL3_MARK, MSIOF2R_TSCK_MARK, - PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_I2C_SDA3_MARK, \ - MSIOF2R_TSYNC_MARK, - SDHICLK0_MARK, - SDHICD0_MARK, - SDHID0_0_MARK, - SDHID0_1_MARK, - SDHID0_2_MARK, - SDHID0_3_MARK, - SDHICMD0_MARK, - SDHIWP0_MARK, - SDHICLK1_MARK, - SDHID1_0_MARK, TS_SPSYNC2_MARK, - SDHID1_1_MARK, TS_SDAT2_MARK, - SDHID1_2_MARK, TS_SDEN2_MARK, - SDHID1_3_MARK, TS_SCK2_MARK, - SDHICMD1_MARK, - SDHICLK2_MARK, - SDHID2_0_MARK, TS_SPSYNC4_MARK, - SDHID2_1_MARK, TS_SDAT4_MARK, - SDHID2_2_MARK, TS_SDEN4_MARK, - SDHID2_3_MARK, TS_SCK4_MARK, - SDHICMD2_MARK, - MMCCLK0_MARK, - MMCD0_0_MARK, - MMCD0_1_MARK, - MMCD0_2_MARK, - MMCD0_3_MARK, - MMCD0_4_MARK, TS_SPSYNC5_MARK, - MMCD0_5_MARK, TS_SDAT5_MARK, - MMCD0_6_MARK, TS_SDEN5_MARK, - MMCD0_7_MARK, TS_SCK5_MARK, - MMCCMD0_MARK, - RESETOUTS__MARK, EXTAL2OUT_MARK, - MCP_WAIT__MCP_FRB_MARK, - MCP_CKO_MARK, MMCCLK1_MARK, - MCP_D15_MCP_NAF15_MARK, - MCP_D14_MCP_NAF14_MARK, - MCP_D13_MCP_NAF13_MARK, - MCP_D12_MCP_NAF12_MARK, - MCP_D11_MCP_NAF11_MARK, - MCP_D10_MCP_NAF10_MARK, - MCP_D9_MCP_NAF9_MARK, - MCP_D8_MCP_NAF8_MARK, MMCCMD1_MARK, - MCP_D7_MCP_NAF7_MARK, MMCD1_7_MARK, - - MCP_D6_MCP_NAF6_MARK, MMCD1_6_MARK, - MCP_D5_MCP_NAF5_MARK, MMCD1_5_MARK, - MCP_D4_MCP_NAF4_MARK, MMCD1_4_MARK, - MCP_D3_MCP_NAF3_MARK, MMCD1_3_MARK, - MCP_D2_MCP_NAF2_MARK, MMCD1_2_MARK, - MCP_D1_MCP_NAF1_MARK, MMCD1_1_MARK, - MCP_D0_MCP_NAF0_MARK, MMCD1_0_MARK, - MCP_NBRSTOUT__MARK, - MCP_WE0__MCP_FWE_MARK, MCP_RDWR_MCP_FWE_MARK, - - /* MSEL2 special cases */ - TSIF2_TS_XX1_MARK, - TSIF2_TS_XX2_MARK, - TSIF2_TS_XX3_MARK, - TSIF2_TS_XX4_MARK, - TSIF2_TS_XX5_MARK, - TSIF1_TS_XX1_MARK, - TSIF1_TS_XX2_MARK, - TSIF1_TS_XX3_MARK, - TSIF1_TS_XX4_MARK, - TSIF1_TS_XX5_MARK, - TSIF0_TS_XX1_MARK, - TSIF0_TS_XX2_MARK, - TSIF0_TS_XX3_MARK, - TSIF0_TS_XX4_MARK, - TSIF0_TS_XX5_MARK, - MST1_TS_XX1_MARK, - MST1_TS_XX2_MARK, - MST1_TS_XX3_MARK, - MST1_TS_XX4_MARK, - MST1_TS_XX5_MARK, - MST0_TS_XX1_MARK, - MST0_TS_XX2_MARK, - MST0_TS_XX3_MARK, - MST0_TS_XX4_MARK, - MST0_TS_XX5_MARK, - - /* MSEL3 special cases */ - SDHI0_VCCQ_MC0_ON_MARK, - SDHI0_VCCQ_MC0_OFF_MARK, - DEBUG_MON_VIO_MARK, - DEBUG_MON_LCDD_MARK, - LCDC_LCDC0_MARK, - LCDC_LCDC1_MARK, - - /* MSEL4 special cases */ - IRQ9_MEM_INT_MARK, - IRQ9_MCP_INT_MARK, - A11_MARK, - KEYOUT8_MARK, - TPU4TO3_MARK, - RESETA_N_PU_ON_MARK, - RESETA_N_PU_OFF_MARK, - EDBGREQ_PD_MARK, - EDBGREQ_PU_MARK, - - /* Functions with pull-ups */ - KEYIN0_PU_MARK, - KEYIN1_PU_MARK, - KEYIN2_PU_MARK, - KEYIN3_PU_MARK, - KEYIN4_PU_MARK, - KEYIN5_PU_MARK, - KEYIN6_PU_MARK, - KEYIN7_PU_MARK, - SDHICD0_PU_MARK, - SDHID0_0_PU_MARK, - SDHID0_1_PU_MARK, - SDHID0_2_PU_MARK, - SDHID0_3_PU_MARK, - SDHICMD0_PU_MARK, - SDHIWP0_PU_MARK, - SDHID1_0_PU_MARK, - SDHID1_1_PU_MARK, - SDHID1_2_PU_MARK, - SDHID1_3_PU_MARK, - SDHICMD1_PU_MARK, - SDHID2_0_PU_MARK, - SDHID2_1_PU_MARK, - SDHID2_2_PU_MARK, - SDHID2_3_PU_MARK, - SDHICMD2_PU_MARK, - MMCCMD0_PU_MARK, - MMCCMD1_PU_MARK, - MMCD0_0_PU_MARK, - MMCD0_1_PU_MARK, - MMCD0_2_PU_MARK, - MMCD0_3_PU_MARK, - MMCD0_4_PU_MARK, - MMCD0_5_PU_MARK, - MMCD0_6_PU_MARK, - MMCD0_7_PU_MARK, - FSIBISLD_PU_MARK, - FSIACK_PU_MARK, - FSIAILR_PU_MARK, - FSIAIBT_PU_MARK, - FSIAISLD_PU_MARK, - - PINMUX_MARK_END, -}; - -static pinmux_enum_t pinmux_data[] = { - /* specify valid pin states for each pin in GPIO mode */ - - /* Table 25-1 (I/O and Pull U/D) */ - PORT_DATA_I_PD(0), - PORT_DATA_I_PU(1), - PORT_DATA_I_PU(2), - PORT_DATA_I_PU(3), - PORT_DATA_I_PU(4), - PORT_DATA_I_PU(5), - PORT_DATA_I_PU(6), - PORT_DATA_I_PU(7), - PORT_DATA_I_PU(8), - PORT_DATA_I_PD(9), - PORT_DATA_I_PD(10), - PORT_DATA_I_PU_PD(11), - PORT_DATA_IO_PU_PD(12), - PORT_DATA_IO_PU_PD(13), - PORT_DATA_IO_PU_PD(14), - PORT_DATA_IO_PU_PD(15), - PORT_DATA_IO_PD(16), - PORT_DATA_IO_PD(17), - PORT_DATA_IO_PU(18), - PORT_DATA_IO_PU(19), - PORT_DATA_O(20), - PORT_DATA_O(21), - PORT_DATA_O(22), - PORT_DATA_O(23), - PORT_DATA_O(24), - PORT_DATA_I_PD(25), - PORT_DATA_I_PD(26), - PORT_DATA_IO_PU(27), - PORT_DATA_IO_PU(28), - PORT_DATA_IO_PD(29), - PORT_DATA_IO_PD(30), - PORT_DATA_IO_PU(31), - PORT_DATA_IO_PD(32), - PORT_DATA_I_PU_PD(33), - PORT_DATA_IO_PD(34), - PORT_DATA_I_PU_PD(35), - PORT_DATA_IO_PD(36), - PORT_DATA_IO(37), - PORT_DATA_O(38), - PORT_DATA_I_PU(39), - PORT_DATA_I_PU_PD(40), - PORT_DATA_O(41), - PORT_DATA_IO_PD(42), - PORT_DATA_IO_PU_PD(43), - PORT_DATA_IO_PU_PD(44), - PORT_DATA_IO_PD(45), - PORT_DATA_IO_PD(46), - PORT_DATA_IO_PD(47), - PORT_DATA_I_PD(48), - PORT_DATA_IO_PU_PD(49), - PORT_DATA_IO_PD(50), - - PORT_DATA_IO_PD(51), - PORT_DATA_O(52), - PORT_DATA_IO_PU_PD(53), - PORT_DATA_IO_PU_PD(54), - PORT_DATA_IO_PD(55), - PORT_DATA_I_PU_PD(56), - PORT_DATA_IO(57), - PORT_DATA_IO(58), - PORT_DATA_IO(59), - PORT_DATA_IO(60), - PORT_DATA_IO(61), - PORT_DATA_IO_PD(62), - PORT_DATA_IO_PD(63), - PORT_DATA_IO_PU_PD(64), - PORT_DATA_IO_PD(65), - PORT_DATA_IO_PU_PD(66), - PORT_DATA_IO_PU_PD(67), - PORT_DATA_IO_PU_PD(68), - PORT_DATA_IO_PU_PD(69), - PORT_DATA_IO_PU_PD(70), - PORT_DATA_IO_PU_PD(71), - PORT_DATA_IO_PU_PD(72), - PORT_DATA_I_PU_PD(73), - PORT_DATA_IO_PU(74), - PORT_DATA_IO_PU(75), - PORT_DATA_IO_PU(76), - PORT_DATA_IO_PU(77), - PORT_DATA_IO_PU(78), - PORT_DATA_IO_PU(79), - PORT_DATA_IO_PU(80), - PORT_DATA_IO_PU(81), - PORT_DATA_IO_PU(82), - PORT_DATA_IO_PU(83), - PORT_DATA_IO_PU(84), - PORT_DATA_IO_PU(85), - PORT_DATA_IO_PU(86), - PORT_DATA_IO_PU(87), - PORT_DATA_IO_PU(88), - PORT_DATA_IO_PU(89), - PORT_DATA_O(90), - PORT_DATA_IO_PU(91), - PORT_DATA_O(92), - PORT_DATA_IO_PU(93), - PORT_DATA_O(94), - PORT_DATA_I_PU_PD(95), - PORT_DATA_IO(96), - PORT_DATA_IO(97), - PORT_DATA_IO(98), - PORT_DATA_I_PU(99), - PORT_DATA_O(100), - PORT_DATA_O(101), - PORT_DATA_I_PU(102), - PORT_DATA_IO_PD(103), - PORT_DATA_I_PU_PD(104), - PORT_DATA_I_PD(105), - PORT_DATA_I_PD(106), - PORT_DATA_I_PU_PD(107), - PORT_DATA_I_PU_PD(108), - PORT_DATA_IO_PD(109), - PORT_DATA_IO_PD(110), - PORT_DATA_IO_PU_PD(111), - PORT_DATA_IO_PU_PD(112), - PORT_DATA_IO_PU_PD(113), - PORT_DATA_IO_PD(114), - PORT_DATA_IO_PU(115), - PORT_DATA_IO_PU(116), - PORT_DATA_IO_PU_PD(117), - PORT_DATA_IO_PU_PD(118), - PORT_DATA_IO_PD(128), - - PORT_DATA_IO_PD(129), - PORT_DATA_IO_PU_PD(130), - PORT_DATA_IO_PD(131), - PORT_DATA_IO_PD(132), - PORT_DATA_IO_PD(133), - PORT_DATA_IO_PU_PD(134), - PORT_DATA_IO_PU_PD(135), - PORT_DATA_IO_PU_PD(136), - PORT_DATA_IO_PU_PD(137), - PORT_DATA_IO_PD(138), - PORT_DATA_IO_PD(139), - PORT_DATA_IO_PD(140), - PORT_DATA_IO_PD(141), - PORT_DATA_IO_PD(142), - PORT_DATA_IO_PD(143), - PORT_DATA_IO_PU_PD(144), - PORT_DATA_IO_PD(145), - PORT_DATA_IO_PU_PD(146), - PORT_DATA_IO_PU_PD(147), - PORT_DATA_IO_PU_PD(148), - PORT_DATA_IO_PU_PD(149), - PORT_DATA_I_PU_PD(150), - PORT_DATA_IO_PU_PD(151), - PORT_DATA_IO_PU_PD(152), - PORT_DATA_IO_PD(153), - PORT_DATA_IO_PD(154), - PORT_DATA_I_PU_PD(155), - PORT_DATA_IO_PU_PD(156), - PORT_DATA_I_PD(157), - PORT_DATA_IO_PD(158), - PORT_DATA_IO_PU_PD(159), - PORT_DATA_IO_PU_PD(160), - PORT_DATA_I_PU_PD(161), - PORT_DATA_I_PU_PD(162), - PORT_DATA_IO_PU_PD(163), - PORT_DATA_I_PU_PD(164), - PORT_DATA_IO_PD(192), - PORT_DATA_IO_PU_PD(193), - PORT_DATA_IO_PD(194), - PORT_DATA_IO_PU_PD(195), - PORT_DATA_IO_PD(196), - PORT_DATA_IO_PD(197), - PORT_DATA_IO_PD(198), - PORT_DATA_IO_PD(199), - PORT_DATA_IO_PU_PD(200), - PORT_DATA_IO_PU_PD(201), - PORT_DATA_IO_PU_PD(202), - PORT_DATA_IO_PU_PD(203), - PORT_DATA_IO_PU_PD(204), - PORT_DATA_IO_PU_PD(205), - PORT_DATA_IO_PU_PD(206), - PORT_DATA_IO_PD(207), - PORT_DATA_IO_PD(208), - PORT_DATA_IO_PD(209), - PORT_DATA_IO_PD(210), - PORT_DATA_IO_PD(211), - PORT_DATA_IO_PD(212), - PORT_DATA_IO_PD(213), - PORT_DATA_IO_PU_PD(214), - PORT_DATA_IO_PU_PD(215), - PORT_DATA_IO_PD(216), - PORT_DATA_IO_PD(217), - PORT_DATA_O(218), - PORT_DATA_IO_PD(219), - PORT_DATA_IO_PD(220), - PORT_DATA_IO_PU_PD(221), - PORT_DATA_IO_PU_PD(222), - PORT_DATA_I_PU_PD(223), - PORT_DATA_I_PU_PD(224), - - PORT_DATA_IO_PU_PD(225), - PORT_DATA_O(226), - PORT_DATA_IO_PU_PD(227), - PORT_DATA_I_PU_PD(228), - PORT_DATA_I_PD(229), - PORT_DATA_IO(230), - PORT_DATA_IO_PU_PD(231), - PORT_DATA_IO_PU_PD(232), - PORT_DATA_I_PU_PD(233), - PORT_DATA_IO_PU_PD(234), - PORT_DATA_IO_PU_PD(235), - PORT_DATA_IO_PU_PD(236), - PORT_DATA_IO_PD(237), - PORT_DATA_IO_PU_PD(238), - PORT_DATA_IO_PU_PD(239), - PORT_DATA_IO_PU_PD(240), - PORT_DATA_O(241), - PORT_DATA_I_PD(242), - PORT_DATA_IO_PU_PD(243), - PORT_DATA_IO_PU_PD(244), - PORT_DATA_IO_PU_PD(245), - PORT_DATA_IO_PU_PD(246), - PORT_DATA_IO_PU_PD(247), - PORT_DATA_IO_PU_PD(248), - PORT_DATA_IO_PU_PD(249), - PORT_DATA_IO_PU_PD(250), - PORT_DATA_IO_PU_PD(251), - PORT_DATA_IO_PU_PD(252), - PORT_DATA_IO_PU_PD(253), - PORT_DATA_IO_PU_PD(254), - PORT_DATA_IO_PU_PD(255), - PORT_DATA_IO_PU_PD(256), - PORT_DATA_IO_PU_PD(257), - PORT_DATA_IO_PU_PD(258), - PORT_DATA_IO_PU_PD(259), - PORT_DATA_IO_PU_PD(260), - PORT_DATA_IO_PU_PD(261), - PORT_DATA_IO_PU_PD(262), - PORT_DATA_IO_PU_PD(263), - PORT_DATA_IO_PU_PD(264), - PORT_DATA_IO_PU_PD(265), - PORT_DATA_IO_PU_PD(266), - PORT_DATA_IO_PU_PD(267), - PORT_DATA_IO_PU_PD(268), - PORT_DATA_IO_PU_PD(269), - PORT_DATA_IO_PU_PD(270), - PORT_DATA_IO_PU_PD(271), - PORT_DATA_IO_PU_PD(272), - PORT_DATA_IO_PU_PD(273), - PORT_DATA_IO_PU_PD(274), - PORT_DATA_IO_PU_PD(275), - PORT_DATA_IO_PU_PD(276), - PORT_DATA_IO_PU_PD(277), - PORT_DATA_IO_PU_PD(278), - PORT_DATA_IO_PU_PD(279), - PORT_DATA_IO_PU_PD(280), - PORT_DATA_O(281), - PORT_DATA_O(282), - PORT_DATA_I_PU(288), - PORT_DATA_IO_PU_PD(289), - PORT_DATA_IO_PU_PD(290), - PORT_DATA_IO_PU_PD(291), - PORT_DATA_IO_PU_PD(292), - PORT_DATA_IO_PU_PD(293), - PORT_DATA_IO_PU_PD(294), - PORT_DATA_IO_PU_PD(295), - PORT_DATA_IO_PU_PD(296), - PORT_DATA_IO_PU_PD(297), - PORT_DATA_IO_PU_PD(298), - - PORT_DATA_IO_PU_PD(299), - PORT_DATA_IO_PU_PD(300), - PORT_DATA_IO_PU_PD(301), - PORT_DATA_IO_PU_PD(302), - PORT_DATA_IO_PU_PD(303), - PORT_DATA_IO_PU_PD(304), - PORT_DATA_IO_PU_PD(305), - PORT_DATA_O(306), - PORT_DATA_O(307), - PORT_DATA_I_PU(308), - PORT_DATA_O(309), - - /* Table 25-1 (Function 0-7) */ - PINMUX_DATA(VBUS_0_MARK, PORT0_FN1), - PINMUX_DATA(GPI0_MARK, PORT1_FN1), - PINMUX_DATA(GPI1_MARK, PORT2_FN1), - PINMUX_DATA(GPI2_MARK, PORT3_FN1), - PINMUX_DATA(GPI3_MARK, PORT4_FN1), - PINMUX_DATA(GPI4_MARK, PORT5_FN1), - PINMUX_DATA(GPI5_MARK, PORT6_FN1), - PINMUX_DATA(GPI6_MARK, PORT7_FN1), - PINMUX_DATA(GPI7_MARK, PORT8_FN1), - PINMUX_DATA(SCIFA7_RXD_MARK, PORT12_FN2), - PINMUX_DATA(SCIFA7_CTS__MARK, PORT13_FN2), - PINMUX_DATA(GPO7_MARK, PORT14_FN1), \ - PINMUX_DATA(MFG0_OUT2_MARK, PORT14_FN4), - PINMUX_DATA(GPO6_MARK, PORT15_FN1), \ - PINMUX_DATA(MFG1_OUT2_MARK, PORT15_FN4), - PINMUX_DATA(GPO5_MARK, PORT16_FN1), \ - PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), \ - PINMUX_DATA(FSICOSLDT3_MARK, PORT16_FN3), \ - PINMUX_DATA(PORT16_VIO_CKOR_MARK, PORT16_FN4), - PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2), - PINMUX_DATA(SCIFA7_TXD_MARK, PORT18_FN2), - PINMUX_DATA(SCIFA7_RTS__MARK, PORT19_FN2), \ - PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3), - PINMUX_DATA(GPO0_MARK, PORT20_FN1), - PINMUX_DATA(GPO1_MARK, PORT21_FN1), - PINMUX_DATA(GPO2_MARK, PORT22_FN1), \ - PINMUX_DATA(STATUS0_MARK, PORT22_FN2), - PINMUX_DATA(GPO3_MARK, PORT23_FN1), \ - PINMUX_DATA(STATUS1_MARK, PORT23_FN2), - PINMUX_DATA(GPO4_MARK, PORT24_FN1), \ - PINMUX_DATA(STATUS2_MARK, PORT24_FN2), - PINMUX_DATA(VINT_MARK, PORT25_FN1), - PINMUX_DATA(TCKON_MARK, PORT26_FN1), - PINMUX_DATA(XDVFS1_MARK, PORT27_FN1), \ - PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0, - MSEL2CR_MSEL16_1), \ - PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0, - MSEL2CR_MSEL18_1), \ - PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \ - PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7), - PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \ - PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0, - MSEL2CR_MSEL16_1), \ - PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0, - MSEL2CR_MSEL18_1), \ - PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7), - PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \ - PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4), - PINMUX_DATA(SIM_CLK_MARK, PORT30_FN1), \ - PINMUX_DATA(PORT30_VIO_CKOR_MARK, PORT30_FN4), - PINMUX_DATA(SIM_D_MARK, PORT31_FN1), \ - PINMUX_DATA(PORT31_IROUT_MARK, PORT31_FN4), - PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2), - PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), \ - PINMUX_DATA(XWUP_MARK, PORT33_FN3), - PINMUX_DATA(SCIFA4_RTS__MARK, PORT34_FN2), - PINMUX_DATA(SCIFA4_CTS__MARK, PORT35_FN2), - PINMUX_DATA(FSIBOBT_MARK, PORT36_FN1), \ - PINMUX_DATA(FSIBIBT_MARK, PORT36_FN2), - PINMUX_DATA(FSIBOLR_MARK, PORT37_FN1), \ - PINMUX_DATA(FSIBILR_MARK, PORT37_FN2), - PINMUX_DATA(FSIBOSLD_MARK, PORT38_FN1), - PINMUX_DATA(FSIBISLD_MARK, PORT39_FN1), - PINMUX_DATA(VACK_MARK, PORT40_FN1), - PINMUX_DATA(XTAL1L_MARK, PORT41_FN1), - PINMUX_DATA(SCIFA0_RTS__MARK, PORT42_FN2), \ - PINMUX_DATA(FSICOSLDT2_MARK, PORT42_FN3), - PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2), - PINMUX_DATA(SCIFA0_CTS__MARK, PORT44_FN2), \ - PINMUX_DATA(FSICOSLDT1_MARK, PORT44_FN3), - PINMUX_DATA(FSICOBT_MARK, PORT45_FN1), \ - PINMUX_DATA(FSICIBT_MARK, PORT45_FN2), \ - PINMUX_DATA(FSIDOBT_MARK, PORT45_FN3), \ - PINMUX_DATA(FSIDIBT_MARK, PORT45_FN4), - PINMUX_DATA(FSICOLR_MARK, PORT46_FN1), \ - PINMUX_DATA(FSICILR_MARK, PORT46_FN2), \ - PINMUX_DATA(FSIDOLR_MARK, PORT46_FN3), \ - PINMUX_DATA(FSIDILR_MARK, PORT46_FN4), - PINMUX_DATA(FSICOSLD_MARK, PORT47_FN1), \ - PINMUX_DATA(PORT47_FSICSPDIF_MARK, PORT47_FN2), - PINMUX_DATA(FSICISLD_MARK, PORT48_FN1), \ - PINMUX_DATA(FSIDISLD_MARK, PORT48_FN3), - PINMUX_DATA(FSIACK_MARK, PORT49_FN1), \ - PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2, MSEL4CR_MSEL19_1), \ - PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN4), \ - PINMUX_DATA(FSIAOMC_MARK, PORT49_FN5), - PINMUX_DATA(FSIAOLR_MARK, PORT50_FN1), \ - PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), \ - PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), \ - PINMUX_DATA(FSIAILR_MARK, PORT50_FN5), - - PINMUX_DATA(FSIAOBT_MARK, PORT51_FN1), \ - PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), \ - PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), \ - PINMUX_DATA(FSIAIBT_MARK, PORT51_FN5), - PINMUX_DATA(FSIAOSLD_MARK, PORT52_FN1), \ - PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2), - PINMUX_DATA(FSIASPDIF_MARK, PORT53_FN1), \ - PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2, MSEL4CR_MSEL19_1), \ - PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), \ - PINMUX_DATA(FSIBSPDIF_MARK, PORT53_FN5), \ - PINMUX_DATA(PORT53_FSICSPDIF_MARK, PORT53_FN6), - PINMUX_DATA(FSIBCK_MARK, PORT54_FN1), \ - PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2, MSEL4CR_MSEL19_1), \ - PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), \ - PINMUX_DATA(FSIBOMC_MARK, PORT54_FN5), \ - PINMUX_DATA(FSICCK_MARK, PORT54_FN6), \ - PINMUX_DATA(FSICOMC_MARK, PORT54_FN7), - PINMUX_DATA(FSIAISLD_MARK, PORT55_FN1), \ - PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3), - PINMUX_DATA(A0_MARK, PORT57_FN1), \ - PINMUX_DATA(BS__MARK, PORT57_FN2), - PINMUX_DATA(A12_MARK, PORT58_FN1), \ - PINMUX_DATA(PORT58_KEYOUT7_MARK, PORT58_FN2), \ - PINMUX_DATA(TPU4TO2_MARK, PORT58_FN4), - PINMUX_DATA(A13_MARK, PORT59_FN1), \ - PINMUX_DATA(PORT59_KEYOUT6_MARK, PORT59_FN2), \ - PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4), - PINMUX_DATA(A14_MARK, PORT60_FN1), \ - PINMUX_DATA(KEYOUT5_MARK, PORT60_FN2), - PINMUX_DATA(A15_MARK, PORT61_FN1), \ - PINMUX_DATA(KEYOUT4_MARK, PORT61_FN2), - PINMUX_DATA(A16_MARK, PORT62_FN1), \ - PINMUX_DATA(KEYOUT3_MARK, PORT62_FN2), \ - PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN4, MSEL3CR_MSEL11_0), - PINMUX_DATA(A17_MARK, PORT63_FN1), \ - PINMUX_DATA(KEYOUT2_MARK, PORT63_FN2), \ - PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN4, MSEL3CR_MSEL11_0), - PINMUX_DATA(A18_MARK, PORT64_FN1), \ - PINMUX_DATA(KEYOUT1_MARK, PORT64_FN2), \ - PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN4, MSEL3CR_MSEL11_0), - PINMUX_DATA(A19_MARK, PORT65_FN1), \ - PINMUX_DATA(KEYOUT0_MARK, PORT65_FN2), \ - PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN4, MSEL3CR_MSEL11_0), - PINMUX_DATA(A20_MARK, PORT66_FN1), \ - PINMUX_DATA(KEYIN0_MARK, PORT66_FN2), \ - PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN4, MSEL3CR_MSEL11_0), - PINMUX_DATA(A21_MARK, PORT67_FN1), \ - PINMUX_DATA(KEYIN1_MARK, PORT67_FN2), \ - PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN4, MSEL3CR_MSEL11_0), - PINMUX_DATA(A22_MARK, PORT68_FN1), \ - PINMUX_DATA(KEYIN2_MARK, PORT68_FN2), \ - PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN4, MSEL3CR_MSEL11_0), - PINMUX_DATA(A23_MARK, PORT69_FN1), \ - PINMUX_DATA(KEYIN3_MARK, PORT69_FN2), \ - PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN4, MSEL3CR_MSEL11_0), - PINMUX_DATA(A24_MARK, PORT70_FN1), \ - PINMUX_DATA(KEYIN4_MARK, PORT70_FN2), \ - PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN4, MSEL3CR_MSEL11_0), - PINMUX_DATA(A25_MARK, PORT71_FN1), \ - PINMUX_DATA(KEYIN5_MARK, PORT71_FN2), \ - PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN4, MSEL3CR_MSEL11_0), - PINMUX_DATA(A26_MARK, PORT72_FN1), \ - PINMUX_DATA(KEYIN6_MARK, PORT72_FN2), - PINMUX_DATA(KEYIN7_MARK, PORT73_FN2), - PINMUX_DATA(D0_NAF0_MARK, PORT74_FN1), - PINMUX_DATA(D1_NAF1_MARK, PORT75_FN1), - PINMUX_DATA(D2_NAF2_MARK, PORT76_FN1), - PINMUX_DATA(D3_NAF3_MARK, PORT77_FN1), - PINMUX_DATA(D4_NAF4_MARK, PORT78_FN1), - PINMUX_DATA(D5_NAF5_MARK, PORT79_FN1), - PINMUX_DATA(D6_NAF6_MARK, PORT80_FN1), - PINMUX_DATA(D7_NAF7_MARK, PORT81_FN1), - PINMUX_DATA(D8_NAF8_MARK, PORT82_FN1), - PINMUX_DATA(D9_NAF9_MARK, PORT83_FN1), - PINMUX_DATA(D10_NAF10_MARK, PORT84_FN1), - PINMUX_DATA(D11_NAF11_MARK, PORT85_FN1), - PINMUX_DATA(D12_NAF12_MARK, PORT86_FN1), - PINMUX_DATA(D13_NAF13_MARK, PORT87_FN1), - PINMUX_DATA(D14_NAF14_MARK, PORT88_FN1), - PINMUX_DATA(D15_NAF15_MARK, PORT89_FN1), - PINMUX_DATA(CS4__MARK, PORT90_FN1), - PINMUX_DATA(CS5A__MARK, PORT91_FN1), \ - PINMUX_DATA(PORT91_RDWR_MARK, PORT91_FN2), - PINMUX_DATA(CS5B__MARK, PORT92_FN1), \ - PINMUX_DATA(FCE1__MARK, PORT92_FN2), - PINMUX_DATA(CS6B__MARK, PORT93_FN1), \ - PINMUX_DATA(DACK0_MARK, PORT93_FN4), - PINMUX_DATA(FCE0__MARK, PORT94_FN1), \ - PINMUX_DATA(CS6A__MARK, PORT94_FN2), - PINMUX_DATA(WAIT__MARK, PORT95_FN1), \ - PINMUX_DATA(DREQ0_MARK, PORT95_FN2), - PINMUX_DATA(RD__FSC_MARK, PORT96_FN1), - PINMUX_DATA(WE0__FWE_MARK, PORT97_FN1), \ - PINMUX_DATA(RDWR_FWE_MARK, PORT97_FN2), - PINMUX_DATA(WE1__MARK, PORT98_FN1), - PINMUX_DATA(FRB_MARK, PORT99_FN1), - PINMUX_DATA(CKO_MARK, PORT100_FN1), - PINMUX_DATA(NBRSTOUT__MARK, PORT101_FN1), - PINMUX_DATA(NBRST__MARK, PORT102_FN1), - PINMUX_DATA(BBIF2_TXD_MARK, PORT103_FN3), - PINMUX_DATA(BBIF2_RXD_MARK, PORT104_FN3), - PINMUX_DATA(BBIF2_SYNC_MARK, PORT105_FN3), - PINMUX_DATA(BBIF2_SCK_MARK, PORT106_FN3), - PINMUX_DATA(SCIFA3_CTS__MARK, PORT107_FN3), \ - PINMUX_DATA(MFG3_IN2_MARK, PORT107_FN4), - PINMUX_DATA(SCIFA3_RXD_MARK, PORT108_FN3), \ - PINMUX_DATA(MFG3_IN1_MARK, PORT108_FN4), - PINMUX_DATA(BBIF1_SS2_MARK, PORT109_FN2), \ - PINMUX_DATA(SCIFA3_RTS__MARK, PORT109_FN3), \ - PINMUX_DATA(MFG3_OUT1_MARK, PORT109_FN4), - PINMUX_DATA(SCIFA3_TXD_MARK, PORT110_FN3), - PINMUX_DATA(HSI_RX_DATA_MARK, PORT111_FN1), \ - PINMUX_DATA(BBIF1_RXD_MARK, PORT111_FN3), - PINMUX_DATA(HSI_TX_WAKE_MARK, PORT112_FN1), \ - PINMUX_DATA(BBIF1_TSCK_MARK, PORT112_FN3), - PINMUX_DATA(HSI_TX_DATA_MARK, PORT113_FN1), \ - PINMUX_DATA(BBIF1_TSYNC_MARK, PORT113_FN3), - PINMUX_DATA(HSI_TX_READY_MARK, PORT114_FN1), \ - PINMUX_DATA(BBIF1_TXD_MARK, PORT114_FN3), - PINMUX_DATA(HSI_RX_READY_MARK, PORT115_FN1), \ - PINMUX_DATA(BBIF1_RSCK_MARK, PORT115_FN3), \ - PINMUX_DATA(PORT115_I2C_SCL2_MARK, PORT115_FN5, MSEL2CR_MSEL17_1), \ - PINMUX_DATA(PORT115_I2C_SCL3_MARK, PORT115_FN6, MSEL2CR_MSEL19_1), - PINMUX_DATA(HSI_RX_WAKE_MARK, PORT116_FN1), \ - PINMUX_DATA(BBIF1_RSYNC_MARK, PORT116_FN3), \ - PINMUX_DATA(PORT116_I2C_SDA2_MARK, PORT116_FN5, MSEL2CR_MSEL17_1), \ - PINMUX_DATA(PORT116_I2C_SDA3_MARK, PORT116_FN6, MSEL2CR_MSEL19_1), - PINMUX_DATA(HSI_RX_FLAG_MARK, PORT117_FN1), \ - PINMUX_DATA(BBIF1_SS1_MARK, PORT117_FN2), \ - PINMUX_DATA(BBIF1_FLOW_MARK, PORT117_FN3), - PINMUX_DATA(HSI_TX_FLAG_MARK, PORT118_FN1), - PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), \ - PINMUX_DATA(PORT128_LCD2VSYN_MARK, PORT128_FN4, MSEL3CR_MSEL2_0), \ - PINMUX_DATA(VIO2_VD_MARK, PORT128_FN6, MSEL4CR_MSEL27_0), \ - PINMUX_DATA(LCD2D0_MARK, PORT128_FN7), - - PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), \ - PINMUX_DATA(PORT129_LCD2HSYN_MARK, PORT129_FN4), \ - PINMUX_DATA(PORT129_LCD2CS__MARK, PORT129_FN5), \ - PINMUX_DATA(VIO2_HD_MARK, PORT129_FN6, MSEL4CR_MSEL27_0), \ - PINMUX_DATA(LCD2D1_MARK, PORT129_FN7), - PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), \ - PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3, MSEL4CR_MSEL11_0, - MSEL4CR_MSEL10_1), \ - PINMUX_DATA(LCD2D10_MARK, PORT130_FN7), - PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), \ - PINMUX_DATA(PORT131_KEYOUT6_MARK, PORT131_FN2), \ - PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), \ - PINMUX_DATA(PORT131_KEYOUT11_MARK, PORT131_FN4), \ - PINMUX_DATA(LCD2D11_MARK, PORT131_FN7), - PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), \ - PINMUX_DATA(PORT132_KEYOUT7_MARK, PORT132_FN2), \ - PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), \ - PINMUX_DATA(PORT132_KEYOUT10_MARK, PORT132_FN4), \ - PINMUX_DATA(LCD2D12_MARK, PORT132_FN7), - PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), \ - PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT133_FN3, MSEL4CR_MSEL11_0), \ - PINMUX_DATA(LCD2D13_MARK, PORT133_FN7), - PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), \ - PINMUX_DATA(MSIOF2_TXD_MARK, PORT134_FN3, MSEL4CR_MSEL11_0), \ - PINMUX_DATA(LCD2D14_MARK, PORT134_FN7), - PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), \ - PINMUX_DATA(MSIOF2_TSCK_MARK, PORT135_FN3, MSEL4CR_MSEL11_0), \ - PINMUX_DATA(LCD2D15_MARK, PORT135_FN7), - PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), \ - PINMUX_DATA(PORT136_KEYOUT8_MARK, PORT136_FN2), \ - PINMUX_DATA(LCD2D16_MARK, PORT136_FN7), - PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), \ - PINMUX_DATA(PORT137_KEYOUT9_MARK, PORT137_FN2), \ - PINMUX_DATA(LCD2D17_MARK, PORT137_FN7), - PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), \ - PINMUX_DATA(PORT138_KEYOUT8_MARK, PORT138_FN2), \ - PINMUX_DATA(VIO2_D0_MARK, PORT138_FN6), \ - PINMUX_DATA(LCD2D6_MARK, PORT138_FN7), - PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), \ - PINMUX_DATA(PORT139_KEYOUT9_MARK, PORT139_FN2), \ - PINMUX_DATA(VIO2_D1_MARK, PORT139_FN6), \ - PINMUX_DATA(LCD2D7_MARK, PORT139_FN7), - PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), \ - PINMUX_DATA(TPU0TO2_MARK, PORT140_FN4), \ - PINMUX_DATA(VIO2_D2_MARK, PORT140_FN6), \ - PINMUX_DATA(LCD2D8_MARK, PORT140_FN7), - PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), \ - PINMUX_DATA(TPU0TO3_MARK, PORT141_FN4), \ - PINMUX_DATA(VIO2_D3_MARK, PORT141_FN6), \ - PINMUX_DATA(LCD2D9_MARK, PORT141_FN7), - PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), \ - PINMUX_DATA(PORT142_KEYOUT10_MARK, PORT142_FN2), \ - PINMUX_DATA(VIO2_D4_MARK, PORT142_FN6), \ - PINMUX_DATA(LCD2D2_MARK, PORT142_FN7), - PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), \ - PINMUX_DATA(PORT143_KEYOUT11_MARK, PORT143_FN2), \ - PINMUX_DATA(PORT143_KEYOUT6_MARK, PORT143_FN3), \ - PINMUX_DATA(VIO2_D5_MARK, PORT143_FN6), \ - PINMUX_DATA(LCD2D3_MARK, PORT143_FN7), - PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), \ - PINMUX_DATA(PORT144_KEYOUT7_MARK, PORT144_FN2), \ - PINMUX_DATA(VIO2_D6_MARK, PORT144_FN6), \ - PINMUX_DATA(LCD2D4_MARK, PORT144_FN7), - PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), \ - PINMUX_DATA(TPU1TO3_MARK, PORT145_FN3), \ - PINMUX_DATA(PORT145_LCD2DISP_MARK, PORT145_FN4), \ - PINMUX_DATA(PORT145_LCD2RS_MARK, PORT145_FN5), \ - PINMUX_DATA(VIO2_D7_MARK, PORT145_FN6), \ - PINMUX_DATA(LCD2D5_MARK, PORT145_FN7), - PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), \ - PINMUX_DATA(LCD2DCK_MARK, PORT146_FN4), \ - PINMUX_DATA(PORT146_LCD2WR__MARK, PORT146_FN5), \ - PINMUX_DATA(VIO2_CLK_MARK, PORT146_FN6, MSEL4CR_MSEL27_0), \ - PINMUX_DATA(LCD2D18_MARK, PORT146_FN7), - PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), \ - PINMUX_DATA(LCD2RD__MARK, PORT147_FN4), \ - PINMUX_DATA(VIO2_FIELD_MARK, PORT147_FN6, MSEL4CR_MSEL27_0), \ - PINMUX_DATA(LCD2D19_MARK, PORT147_FN7), - PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1), - PINMUX_DATA(A27_MARK, PORT149_FN1), \ - PINMUX_DATA(PORT149_RDWR_MARK, PORT149_FN2), \ - PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), \ - PINMUX_DATA(PORT149_KEYOUT9_MARK, PORT149_FN4), - PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN3), - PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN4), \ - PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN5), - PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN4), \ - PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN5), - PINMUX_DATA(TPU1TO2_MARK, PORT153_FN3), \ - PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN4), \ - PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN5), - PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2, MSEL3CR_MSEL9_0), \ - PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN5), - PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2, MSEL3CR_MSEL9_0), \ - PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN5), - PINMUX_DATA(SCIFA2_RTS1__MARK, PORT156_FN2, MSEL3CR_MSEL9_0), \ - PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN5), - PINMUX_DATA(SCIFA2_CTS1__MARK, PORT157_FN2, MSEL3CR_MSEL9_0), \ - PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN5, MSEL4CR_MSEL11_0, - MSEL4CR_MSEL10_0), - PINMUX_DATA(DINT__MARK, PORT158_FN1), \ - PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2, MSEL3CR_MSEL9_0), \ - PINMUX_DATA(TS_SCK3_MARK, PORT158_FN4), - PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1, MSEL4CR_MSEL22_0), \ - PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2, MSEL4CR_MSEL21_1), \ - PINMUX_DATA(NMI_MARK, PORT159_FN3), - PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1, MSEL4CR_MSEL22_0), \ - PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2, MSEL4CR_MSEL21_1), - PINMUX_DATA(PORT161_SCIFB_CTS__MARK, PORT161_FN1, MSEL4CR_MSEL22_0), \ - PINMUX_DATA(PORT161_SCIFA5_CTS__MARK, PORT161_FN2, MSEL4CR_MSEL21_1), - PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1, MSEL4CR_MSEL22_0), \ - PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2, MSEL4CR_MSEL21_1), - PINMUX_DATA(PORT163_SCIFB_RTS__MARK, PORT163_FN1, MSEL4CR_MSEL22_0), \ - PINMUX_DATA(PORT163_SCIFA5_RTS__MARK, PORT163_FN2, MSEL4CR_MSEL21_1), \ - PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5), - PINMUX_DATA(LCDD0_MARK, PORT192_FN1), - PINMUX_DATA(LCDD1_MARK, PORT193_FN1), \ - PINMUX_DATA(PORT193_SCIFA5_CTS__MARK, PORT193_FN3, MSEL4CR_MSEL21_0, - MSEL4CR_MSEL20_1), \ - PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN5), - PINMUX_DATA(LCDD2_MARK, PORT194_FN1), \ - PINMUX_DATA(PORT194_SCIFA5_RTS__MARK, PORT194_FN3, MSEL4CR_MSEL21_0, - MSEL4CR_MSEL20_1), \ - PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN5), - PINMUX_DATA(LCDD3_MARK, PORT195_FN1), \ - PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3, MSEL4CR_MSEL21_0, - MSEL4CR_MSEL20_1), \ - PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN5), - PINMUX_DATA(LCDD4_MARK, PORT196_FN1), \ - PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3, MSEL4CR_MSEL21_0, - MSEL4CR_MSEL20_1), - PINMUX_DATA(LCDD5_MARK, PORT197_FN1), \ - PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3, MSEL4CR_MSEL21_0, - MSEL4CR_MSEL20_1), \ - PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN5), \ - PINMUX_DATA(TPU2TO1_MARK, PORT197_FN7), - PINMUX_DATA(LCDD6_MARK, PORT198_FN1), - PINMUX_DATA(LCDD7_MARK, PORT199_FN1), \ - PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), \ - PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN5), - PINMUX_DATA(LCDD8_MARK, PORT200_FN1), \ - PINMUX_DATA(D16_MARK, PORT200_FN6), - PINMUX_DATA(LCDD9_MARK, PORT201_FN1), \ - PINMUX_DATA(D17_MARK, PORT201_FN6), - PINMUX_DATA(LCDD10_MARK, PORT202_FN1), \ - PINMUX_DATA(D18_MARK, PORT202_FN6), - PINMUX_DATA(LCDD11_MARK, PORT203_FN1), \ - PINMUX_DATA(D19_MARK, PORT203_FN6), - PINMUX_DATA(LCDD12_MARK, PORT204_FN1), \ - PINMUX_DATA(D20_MARK, PORT204_FN6), - PINMUX_DATA(LCDD13_MARK, PORT205_FN1), \ - PINMUX_DATA(D21_MARK, PORT205_FN6), - PINMUX_DATA(LCDD14_MARK, PORT206_FN1), \ - PINMUX_DATA(D22_MARK, PORT206_FN6), - PINMUX_DATA(LCDD15_MARK, PORT207_FN1), \ - PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(D23_MARK, PORT207_FN6), - PINMUX_DATA(LCDD16_MARK, PORT208_FN1), \ - PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(D24_MARK, PORT208_FN6), - PINMUX_DATA(LCDD17_MARK, PORT209_FN1), \ - PINMUX_DATA(D25_MARK, PORT209_FN6), - PINMUX_DATA(LCDD18_MARK, PORT210_FN1), \ - PINMUX_DATA(DREQ2_MARK, PORT210_FN2), \ - PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN5, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(D26_MARK, PORT210_FN6), - PINMUX_DATA(LCDD19_MARK, PORT211_FN1), \ - PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN5, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(D27_MARK, PORT211_FN6), - PINMUX_DATA(LCDD20_MARK, PORT212_FN1), \ - PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), \ - PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN5, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(D28_MARK, PORT212_FN6), - PINMUX_DATA(LCDD21_MARK, PORT213_FN1), \ - PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), \ - PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN5, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(D29_MARK, PORT213_FN6), - PINMUX_DATA(LCDD22_MARK, PORT214_FN1), \ - PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), \ - PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN5, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(D30_MARK, PORT214_FN6), - PINMUX_DATA(LCDD23_MARK, PORT215_FN1), \ - PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), \ - PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN5, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(D31_MARK, PORT215_FN6), - PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), \ - PINMUX_DATA(LCDWR__MARK, PORT216_FN2), - PINMUX_DATA(LCDRD__MARK, PORT217_FN1), \ - PINMUX_DATA(DACK2_MARK, PORT217_FN2), \ - PINMUX_DATA(PORT217_LCD2RS_MARK, PORT217_FN3), \ - PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN5, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(VIO2_FIELD3_MARK, PORT217_FN6, MSEL4CR_MSEL27_1, - MSEL4CR_MSEL26_1), \ - PINMUX_DATA(PORT217_LCD2DISP_MARK, PORT217_FN7), - PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), \ - PINMUX_DATA(LCDCS__MARK, PORT218_FN2), \ - PINMUX_DATA(LCDCS2__MARK, PORT218_FN3), \ - PINMUX_DATA(DACK3_MARK, PORT218_FN4), \ - PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5), - PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), \ - PINMUX_DATA(LCDRS_MARK, PORT219_FN2), \ - PINMUX_DATA(PORT219_LCD2WR__MARK, PORT219_FN3), \ - PINMUX_DATA(DREQ3_MARK, PORT219_FN4), \ - PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN5, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(VIO2_CLK3_MARK, PORT219_FN6, MSEL4CR_MSEL27_1, - MSEL4CR_MSEL26_1), \ - PINMUX_DATA(LCD2DCK_2_MARK, PORT219_FN7), - PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), \ - PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2), - PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), \ - PINMUX_DATA(DREQ1_MARK, PORT221_FN2), \ - PINMUX_DATA(PORT221_LCD2CS__MARK, PORT221_FN3), \ - PINMUX_DATA(PWEN_MARK, PORT221_FN4), \ - PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN5, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(VIO2_HD3_MARK, PORT221_FN6, MSEL4CR_MSEL27_1, - MSEL4CR_MSEL26_1), \ - PINMUX_DATA(PORT221_LCD2HSYN_MARK, PORT221_FN7), - PINMUX_DATA(LCDDON_MARK, PORT222_FN1), \ - PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), \ - PINMUX_DATA(DACK1_MARK, PORT222_FN3), \ - PINMUX_DATA(OVCN_MARK, PORT222_FN4), \ - PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5, MSEL3CR_MSEL11_1), \ - PINMUX_DATA(VIO2_VD3_MARK, PORT222_FN6, MSEL4CR_MSEL27_1, - MSEL4CR_MSEL26_1), \ - PINMUX_DATA(PORT222_LCD2VSYN_MARK, PORT222_FN7, MSEL3CR_MSEL2_1), - - PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN2), \ - PINMUX_DATA(OVCN2_MARK, PORT225_FN4), - PINMUX_DATA(EXTLP_MARK, PORT226_FN1), \ - PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), \ - PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN5), - PINMUX_DATA(SCIFA1_RTS__MARK, PORT227_FN2), \ - PINMUX_DATA(IDIN_MARK, PORT227_FN4), - PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN2), - PINMUX_DATA(SCIFA1_CTS__MARK, PORT229_FN2), \ - PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN3), - PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), \ - PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2, MSEL3CR_MSEL9_1), - PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), \ - PINMUX_DATA(SCIFA2_CTS2__MARK, PORT231_FN2, MSEL3CR_MSEL9_1), - PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), \ - PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2, MSEL3CR_MSEL9_1), - PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), \ - PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2, MSEL3CR_MSEL9_1), - PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), \ - PINMUX_DATA(SCIFA2_RTS2__MARK, PORT234_FN2, MSEL3CR_MSEL9_1), \ - PINMUX_DATA(VIO2_CLK2_MARK, PORT234_FN6, MSEL4CR_MSEL27_1, - MSEL4CR_MSEL26_0), \ - PINMUX_DATA(LCD2D20_MARK, PORT234_FN7), - PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), \ - PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), \ - PINMUX_DATA(VIO2_VD2_MARK, PORT235_FN6, MSEL4CR_MSEL27_1, - MSEL4CR_MSEL26_0), \ - PINMUX_DATA(LCD2D21_MARK, PORT235_FN7), - PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), \ - PINMUX_DATA(PORT236_I2C_SDA2_MARK, PORT236_FN2, MSEL2CR_MSEL17_0, - MSEL2CR_MSEL16_0), - PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), \ - PINMUX_DATA(PORT237_I2C_SCL2_MARK, PORT237_FN2, MSEL2CR_MSEL17_0, - MSEL2CR_MSEL16_0), - PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), \ - PINMUX_DATA(VIO2_FIELD2_MARK, PORT238_FN6, MSEL4CR_MSEL27_1, - MSEL4CR_MSEL26_0), \ - PINMUX_DATA(LCD2D22_MARK, PORT238_FN7), - PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), \ - PINMUX_DATA(VIO2_HD2_MARK, PORT239_FN6, MSEL4CR_MSEL27_1, - MSEL4CR_MSEL26_0), \ - PINMUX_DATA(LCD2D23_MARK, PORT239_FN7), - PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1), - PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1, MSEL4CR_MSEL19_0), \ - PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), \ - PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), \ - PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4), - PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1, MSEL4CR_MSEL19_0), \ - PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN3), - PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1, MSEL4CR_MSEL19_0), \ - PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2), - PINMUX_DATA(PORT244_SCIFA5_CTS__MARK, PORT244_FN1, MSEL4CR_MSEL21_0, - MSEL4CR_MSEL20_0), \ - PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), \ - PINMUX_DATA(PORT244_SCIFB_CTS__MARK, PORT244_FN3, MSEL4CR_MSEL22_1), \ - PINMUX_DATA(MSIOF2R_RXD_MARK, PORT244_FN7, MSEL4CR_MSEL11_1), - PINMUX_DATA(PORT245_SCIFA5_RTS__MARK, PORT245_FN1, MSEL4CR_MSEL21_0, - MSEL4CR_MSEL20_0), \ - PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), \ - PINMUX_DATA(PORT245_SCIFB_RTS__MARK, PORT245_FN3, MSEL4CR_MSEL22_1), \ - PINMUX_DATA(MSIOF2R_TXD_MARK, PORT245_FN7, MSEL4CR_MSEL11_1), - PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1, MSEL4CR_MSEL21_0, - MSEL4CR_MSEL20_0), \ - PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), \ - PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3, MSEL4CR_MSEL22_1), \ - PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4), - PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1, MSEL4CR_MSEL21_0, - MSEL4CR_MSEL20_0), \ - PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), \ - PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3, MSEL4CR_MSEL22_1), \ - PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4), - PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1, MSEL4CR_MSEL21_0, - MSEL4CR_MSEL20_0), \ - PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), \ - PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3, MSEL4CR_MSEL22_1), \ - PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), \ - PINMUX_DATA(PORT248_I2C_SCL3_MARK, PORT248_FN5, MSEL2CR_MSEL19_0, - MSEL2CR_MSEL18_0), \ - PINMUX_DATA(MSIOF2R_TSCK_MARK, PORT248_FN7, MSEL4CR_MSEL11_1), - PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), \ - PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), \ - PINMUX_DATA(PORT249_I2C_SDA3_MARK, PORT249_FN5, MSEL2CR_MSEL19_0, - MSEL2CR_MSEL18_0), \ - PINMUX_DATA(MSIOF2R_TSYNC_MARK, PORT249_FN7, MSEL4CR_MSEL11_1), - PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1), - PINMUX_DATA(SDHICD0_MARK, PORT251_FN1), - PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1), - PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1), - PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1), - PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1), - PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1), - PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1), - PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1), - PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), \ - PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3), - PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), \ - PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3), - PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), \ - PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3), - PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), \ - PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3), - PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1), - PINMUX_DATA(SDHICLK2_MARK, PORT264_FN1), - PINMUX_DATA(SDHID2_0_MARK, PORT265_FN1), \ - PINMUX_DATA(TS_SPSYNC4_MARK, PORT265_FN3), - PINMUX_DATA(SDHID2_1_MARK, PORT266_FN1), \ - PINMUX_DATA(TS_SDAT4_MARK, PORT266_FN3), - PINMUX_DATA(SDHID2_2_MARK, PORT267_FN1), \ - PINMUX_DATA(TS_SDEN4_MARK, PORT267_FN3), - PINMUX_DATA(SDHID2_3_MARK, PORT268_FN1), \ - PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3), - PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1), - PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU, - MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU, - MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU, - MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU, - MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU, - MSEL4CR_MSEL15_0), \ - PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3), - PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU, - MSEL4CR_MSEL15_0), \ - PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3), - PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU, - MSEL4CR_MSEL15_0), \ - PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3), - PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU, - MSEL4CR_MSEL15_0), \ - PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3), - PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU, - MSEL4CR_MSEL15_0), - PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \ - PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2), - PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1), - PINMUX_DATA(MCP_CKO_MARK, PORT289_FN1), \ - PINMUX_DATA(MMCCLK1_MARK, PORT289_FN2, MSEL4CR_MSEL15_1), - PINMUX_DATA(MCP_D15_MCP_NAF15_MARK, PORT290_FN1), - PINMUX_DATA(MCP_D14_MCP_NAF14_MARK, PORT291_FN1), - PINMUX_DATA(MCP_D13_MCP_NAF13_MARK, PORT292_FN1), - PINMUX_DATA(MCP_D12_MCP_NAF12_MARK, PORT293_FN1), - PINMUX_DATA(MCP_D11_MCP_NAF11_MARK, PORT294_FN1), - PINMUX_DATA(MCP_D10_MCP_NAF10_MARK, PORT295_FN1), - PINMUX_DATA(MCP_D9_MCP_NAF9_MARK, PORT296_FN1), - PINMUX_DATA(MCP_D8_MCP_NAF8_MARK, PORT297_FN1), \ - PINMUX_DATA(MMCCMD1_MARK, PORT297_FN2, MSEL4CR_MSEL15_1), - PINMUX_DATA(MCP_D7_MCP_NAF7_MARK, PORT298_FN1), \ - PINMUX_DATA(MMCD1_7_MARK, PORT298_FN2, MSEL4CR_MSEL15_1), - - PINMUX_DATA(MCP_D6_MCP_NAF6_MARK, PORT299_FN1), \ - PINMUX_DATA(MMCD1_6_MARK, PORT299_FN2, MSEL4CR_MSEL15_1), - PINMUX_DATA(MCP_D5_MCP_NAF5_MARK, PORT300_FN1), \ - PINMUX_DATA(MMCD1_5_MARK, PORT300_FN2, MSEL4CR_MSEL15_1), - PINMUX_DATA(MCP_D4_MCP_NAF4_MARK, PORT301_FN1), \ - PINMUX_DATA(MMCD1_4_MARK, PORT301_FN2, MSEL4CR_MSEL15_1), - PINMUX_DATA(MCP_D3_MCP_NAF3_MARK, PORT302_FN1), \ - PINMUX_DATA(MMCD1_3_MARK, PORT302_FN2, MSEL4CR_MSEL15_1), - PINMUX_DATA(MCP_D2_MCP_NAF2_MARK, PORT303_FN1), \ - PINMUX_DATA(MMCD1_2_MARK, PORT303_FN2, MSEL4CR_MSEL15_1), - PINMUX_DATA(MCP_D1_MCP_NAF1_MARK, PORT304_FN1), \ - PINMUX_DATA(MMCD1_1_MARK, PORT304_FN2, MSEL4CR_MSEL15_1), - PINMUX_DATA(MCP_D0_MCP_NAF0_MARK, PORT305_FN1), \ - PINMUX_DATA(MMCD1_0_MARK, PORT305_FN2, MSEL4CR_MSEL15_1), - PINMUX_DATA(MCP_NBRSTOUT__MARK, PORT306_FN1), - PINMUX_DATA(MCP_WE0__MCP_FWE_MARK, PORT309_FN1), \ - PINMUX_DATA(MCP_RDWR_MCP_FWE_MARK, PORT309_FN2), - - /* MSEL2 special cases */ - PINMUX_DATA(TSIF2_TS_XX1_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0, - MSEL2CR_MSEL12_0), - PINMUX_DATA(TSIF2_TS_XX2_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0, - MSEL2CR_MSEL12_1), - PINMUX_DATA(TSIF2_TS_XX3_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1, - MSEL2CR_MSEL12_0), - PINMUX_DATA(TSIF2_TS_XX4_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1, - MSEL2CR_MSEL12_1), - PINMUX_DATA(TSIF2_TS_XX5_MARK, MSEL2CR_MSEL14_1, MSEL2CR_MSEL13_0, - MSEL2CR_MSEL12_0), - PINMUX_DATA(TSIF1_TS_XX1_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0, - MSEL2CR_MSEL9_0), - PINMUX_DATA(TSIF1_TS_XX2_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0, - MSEL2CR_MSEL9_1), - PINMUX_DATA(TSIF1_TS_XX3_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1, - MSEL2CR_MSEL9_0), - PINMUX_DATA(TSIF1_TS_XX4_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1, - MSEL2CR_MSEL9_1), - PINMUX_DATA(TSIF1_TS_XX5_MARK, MSEL2CR_MSEL11_1, MSEL2CR_MSEL10_0, - MSEL2CR_MSEL9_0), - PINMUX_DATA(TSIF0_TS_XX1_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0, - MSEL2CR_MSEL6_0), - PINMUX_DATA(TSIF0_TS_XX2_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0, - MSEL2CR_MSEL6_1), - PINMUX_DATA(TSIF0_TS_XX3_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1, - MSEL2CR_MSEL6_0), - PINMUX_DATA(TSIF0_TS_XX4_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1, - MSEL2CR_MSEL6_1), - PINMUX_DATA(TSIF0_TS_XX5_MARK, MSEL2CR_MSEL8_1, MSEL2CR_MSEL7_0, - MSEL2CR_MSEL6_0), - PINMUX_DATA(MST1_TS_XX1_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0, - MSEL2CR_MSEL3_0), - PINMUX_DATA(MST1_TS_XX2_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0, - MSEL2CR_MSEL3_1), - PINMUX_DATA(MST1_TS_XX3_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1, - MSEL2CR_MSEL3_0), - PINMUX_DATA(MST1_TS_XX4_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1, - MSEL2CR_MSEL3_1), - PINMUX_DATA(MST1_TS_XX5_MARK, MSEL2CR_MSEL5_1, MSEL2CR_MSEL4_0, - MSEL2CR_MSEL3_0), - PINMUX_DATA(MST0_TS_XX1_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0, - MSEL2CR_MSEL0_0), - PINMUX_DATA(MST0_TS_XX2_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0, - MSEL2CR_MSEL0_1), - PINMUX_DATA(MST0_TS_XX3_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1, - MSEL2CR_MSEL0_0), - PINMUX_DATA(MST0_TS_XX4_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1, - MSEL2CR_MSEL0_1), - PINMUX_DATA(MST0_TS_XX5_MARK, MSEL2CR_MSEL2_1, MSEL2CR_MSEL1_0, - MSEL2CR_MSEL0_0), - - /* MSEL3 special cases */ - PINMUX_DATA(SDHI0_VCCQ_MC0_ON_MARK, MSEL3CR_MSEL28_1), - PINMUX_DATA(SDHI0_VCCQ_MC0_OFF_MARK, MSEL3CR_MSEL28_0), - PINMUX_DATA(DEBUG_MON_VIO_MARK, MSEL3CR_MSEL15_0), - PINMUX_DATA(DEBUG_MON_LCDD_MARK, MSEL3CR_MSEL15_1), - PINMUX_DATA(LCDC_LCDC0_MARK, MSEL3CR_MSEL6_0), - PINMUX_DATA(LCDC_LCDC1_MARK, MSEL3CR_MSEL6_1), - - /* MSEL4 special cases */ - PINMUX_DATA(IRQ9_MEM_INT_MARK, MSEL4CR_MSEL29_0), - PINMUX_DATA(IRQ9_MCP_INT_MARK, MSEL4CR_MSEL29_1), - PINMUX_DATA(A11_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_0), - PINMUX_DATA(KEYOUT8_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_1), - PINMUX_DATA(TPU4TO3_MARK, MSEL4CR_MSEL13_1, MSEL4CR_MSEL12_0), - PINMUX_DATA(RESETA_N_PU_ON_MARK, MSEL4CR_MSEL4_0), - PINMUX_DATA(RESETA_N_PU_OFF_MARK, MSEL4CR_MSEL4_1), - PINMUX_DATA(EDBGREQ_PD_MARK, MSEL4CR_MSEL1_0), - PINMUX_DATA(EDBGREQ_PU_MARK, MSEL4CR_MSEL1_1), - - /* Functions with pull-ups */ - PINMUX_DATA(KEYIN0_PU_MARK, PORT66_FN2, PORT66_IN_PU), - PINMUX_DATA(KEYIN1_PU_MARK, PORT67_FN2, PORT67_IN_PU), - PINMUX_DATA(KEYIN2_PU_MARK, PORT68_FN2, PORT68_IN_PU), - PINMUX_DATA(KEYIN3_PU_MARK, PORT69_FN2, PORT69_IN_PU), - PINMUX_DATA(KEYIN4_PU_MARK, PORT70_FN2, PORT70_IN_PU), - PINMUX_DATA(KEYIN5_PU_MARK, PORT71_FN2, PORT71_IN_PU), - PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU), - PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU), - - PINMUX_DATA(SDHICD0_PU_MARK, PORT251_FN1, PORT251_IN_PU), - PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU), - PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU), - PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU), - PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU), - PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU), - PINMUX_DATA(SDHIWP0_PU_MARK, PORT257_FN1, PORT256_IN_PU), - PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU), - PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU), - PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU), - PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU), - PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU), - PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU), - PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU), - PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU), - PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU), - PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU), - - PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU, - MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU, - MSEL4CR_MSEL15_1), - - PINMUX_DATA(MMCD0_0_PU_MARK, - PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_1_PU_MARK, - PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_2_PU_MARK, - PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_3_PU_MARK, - PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_4_PU_MARK, - PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_5_PU_MARK, - PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_6_PU_MARK, - PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0), - PINMUX_DATA(MMCD0_7_PU_MARK, - PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0), - - PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU), - PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU), - PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU), - PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU), - PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU), -}; - -static struct pinmux_gpio pinmux_gpios[] = { - GPIO_PORT_ALL(), - - /* Table 25-1 (Functions 0-7) */ - GPIO_FN(VBUS_0), - GPIO_FN(GPI0), - GPIO_FN(GPI1), - GPIO_FN(GPI2), - GPIO_FN(GPI3), - GPIO_FN(GPI4), - GPIO_FN(GPI5), - GPIO_FN(GPI6), - GPIO_FN(GPI7), - GPIO_FN(SCIFA7_RXD), - GPIO_FN(SCIFA7_CTS_), - GPIO_FN(GPO7), \ - GPIO_FN(MFG0_OUT2), - GPIO_FN(GPO6), \ - GPIO_FN(MFG1_OUT2), - GPIO_FN(GPO5), \ - GPIO_FN(SCIFA0_SCK), \ - GPIO_FN(FSICOSLDT3), \ - GPIO_FN(PORT16_VIO_CKOR), - GPIO_FN(SCIFA0_TXD), - GPIO_FN(SCIFA7_TXD), - GPIO_FN(SCIFA7_RTS_), \ - GPIO_FN(PORT19_VIO_CKO2), - GPIO_FN(GPO0), - GPIO_FN(GPO1), - GPIO_FN(GPO2), \ - GPIO_FN(STATUS0), - GPIO_FN(GPO3), \ - GPIO_FN(STATUS1), - GPIO_FN(GPO4), \ - GPIO_FN(STATUS2), - GPIO_FN(VINT), - GPIO_FN(TCKON), - GPIO_FN(XDVFS1), \ - GPIO_FN(PORT27_I2C_SCL2), \ - GPIO_FN(PORT27_I2C_SCL3), \ - GPIO_FN(MFG0_OUT1), \ - GPIO_FN(PORT27_IROUT), - GPIO_FN(XDVFS2), \ - GPIO_FN(PORT28_I2C_SDA2), \ - GPIO_FN(PORT28_I2C_SDA3), \ - GPIO_FN(PORT28_TPU1TO1), - GPIO_FN(SIM_RST), \ - GPIO_FN(PORT29_TPU1TO1), - GPIO_FN(SIM_CLK), \ - GPIO_FN(PORT30_VIO_CKOR), - GPIO_FN(SIM_D), \ - GPIO_FN(PORT31_IROUT), - GPIO_FN(SCIFA4_TXD), - GPIO_FN(SCIFA4_RXD), \ - GPIO_FN(XWUP), - GPIO_FN(SCIFA4_RTS_), - GPIO_FN(SCIFA4_CTS_), - GPIO_FN(FSIBOBT), \ - GPIO_FN(FSIBIBT), - GPIO_FN(FSIBOLR), \ - GPIO_FN(FSIBILR), - GPIO_FN(FSIBOSLD), - GPIO_FN(FSIBISLD), - GPIO_FN(VACK), - GPIO_FN(XTAL1L), - GPIO_FN(SCIFA0_RTS_), \ - GPIO_FN(FSICOSLDT2), - GPIO_FN(SCIFA0_RXD), - GPIO_FN(SCIFA0_CTS_), \ - GPIO_FN(FSICOSLDT1), - GPIO_FN(FSICOBT), \ - GPIO_FN(FSICIBT), \ - GPIO_FN(FSIDOBT), \ - GPIO_FN(FSIDIBT), - GPIO_FN(FSICOLR), \ - GPIO_FN(FSICILR), \ - GPIO_FN(FSIDOLR), \ - GPIO_FN(FSIDILR), - GPIO_FN(FSICOSLD), \ - GPIO_FN(PORT47_FSICSPDIF), - GPIO_FN(FSICISLD), \ - GPIO_FN(FSIDISLD), - GPIO_FN(FSIACK), \ - GPIO_FN(PORT49_IRDA_OUT), \ - GPIO_FN(PORT49_IROUT), \ - GPIO_FN(FSIAOMC), - GPIO_FN(FSIAOLR), \ - GPIO_FN(BBIF2_TSYNC2), \ - GPIO_FN(TPU2TO2), \ - GPIO_FN(FSIAILR), - - GPIO_FN(FSIAOBT), \ - GPIO_FN(BBIF2_TSCK2), \ - GPIO_FN(TPU2TO3), \ - GPIO_FN(FSIAIBT), - GPIO_FN(FSIAOSLD), \ - GPIO_FN(BBIF2_TXD2), - GPIO_FN(FSIASPDIF), \ - GPIO_FN(PORT53_IRDA_IN), \ - GPIO_FN(TPU3TO3), \ - GPIO_FN(FSIBSPDIF), \ - GPIO_FN(PORT53_FSICSPDIF), - GPIO_FN(FSIBCK), \ - GPIO_FN(PORT54_IRDA_FIRSEL), \ - GPIO_FN(TPU3TO2), \ - GPIO_FN(FSIBOMC), \ - GPIO_FN(FSICCK), \ - GPIO_FN(FSICOMC), - GPIO_FN(FSIAISLD), \ - GPIO_FN(TPU0TO0), - GPIO_FN(A0), \ - GPIO_FN(BS_), - GPIO_FN(A12), \ - GPIO_FN(PORT58_KEYOUT7), \ - GPIO_FN(TPU4TO2), - GPIO_FN(A13), \ - GPIO_FN(PORT59_KEYOUT6), \ - GPIO_FN(TPU0TO1), - GPIO_FN(A14), \ - GPIO_FN(KEYOUT5), - GPIO_FN(A15), \ - GPIO_FN(KEYOUT4), - GPIO_FN(A16), \ - GPIO_FN(KEYOUT3), \ - GPIO_FN(MSIOF0_SS1), - GPIO_FN(A17), \ - GPIO_FN(KEYOUT2), \ - GPIO_FN(MSIOF0_TSYNC), - GPIO_FN(A18), \ - GPIO_FN(KEYOUT1), \ - GPIO_FN(MSIOF0_TSCK), - GPIO_FN(A19), \ - GPIO_FN(KEYOUT0), \ - GPIO_FN(MSIOF0_TXD), - GPIO_FN(A20), \ - GPIO_FN(KEYIN0), \ - GPIO_FN(MSIOF0_RSCK), - GPIO_FN(A21), \ - GPIO_FN(KEYIN1), \ - GPIO_FN(MSIOF0_RSYNC), - GPIO_FN(A22), \ - GPIO_FN(KEYIN2), \ - GPIO_FN(MSIOF0_MCK0), - GPIO_FN(A23), \ - GPIO_FN(KEYIN3), \ - GPIO_FN(MSIOF0_MCK1), - GPIO_FN(A24), \ - GPIO_FN(KEYIN4), \ - GPIO_FN(MSIOF0_RXD), - GPIO_FN(A25), \ - GPIO_FN(KEYIN5), \ - GPIO_FN(MSIOF0_SS2), - GPIO_FN(A26), \ - GPIO_FN(KEYIN6), - GPIO_FN(KEYIN7), - GPIO_FN(D0_NAF0), - GPIO_FN(D1_NAF1), - GPIO_FN(D2_NAF2), - GPIO_FN(D3_NAF3), - GPIO_FN(D4_NAF4), - GPIO_FN(D5_NAF5), - GPIO_FN(D6_NAF6), - GPIO_FN(D7_NAF7), - GPIO_FN(D8_NAF8), - GPIO_FN(D9_NAF9), - GPIO_FN(D10_NAF10), - GPIO_FN(D11_NAF11), - GPIO_FN(D12_NAF12), - GPIO_FN(D13_NAF13), - GPIO_FN(D14_NAF14), - GPIO_FN(D15_NAF15), - GPIO_FN(CS4_), - GPIO_FN(CS5A_), \ - GPIO_FN(PORT91_RDWR), - GPIO_FN(CS5B_), \ - GPIO_FN(FCE1_), - GPIO_FN(CS6B_), \ - GPIO_FN(DACK0), - GPIO_FN(FCE0_), \ - GPIO_FN(CS6A_), - GPIO_FN(WAIT_), \ - GPIO_FN(DREQ0), - GPIO_FN(RD__FSC), - GPIO_FN(WE0__FWE), \ - GPIO_FN(RDWR_FWE), - GPIO_FN(WE1_), - GPIO_FN(FRB), - GPIO_FN(CKO), - GPIO_FN(NBRSTOUT_), - GPIO_FN(NBRST_), - GPIO_FN(BBIF2_TXD), - GPIO_FN(BBIF2_RXD), - GPIO_FN(BBIF2_SYNC), - GPIO_FN(BBIF2_SCK), - GPIO_FN(SCIFA3_CTS_), \ - GPIO_FN(MFG3_IN2), - GPIO_FN(SCIFA3_RXD), \ - GPIO_FN(MFG3_IN1), - GPIO_FN(BBIF1_SS2), \ - GPIO_FN(SCIFA3_RTS_), \ - GPIO_FN(MFG3_OUT1), - GPIO_FN(SCIFA3_TXD), - GPIO_FN(HSI_RX_DATA), \ - GPIO_FN(BBIF1_RXD), - GPIO_FN(HSI_TX_WAKE), \ - GPIO_FN(BBIF1_TSCK), - GPIO_FN(HSI_TX_DATA), \ - GPIO_FN(BBIF1_TSYNC), - GPIO_FN(HSI_TX_READY), \ - GPIO_FN(BBIF1_TXD), - GPIO_FN(HSI_RX_READY), \ - GPIO_FN(BBIF1_RSCK), \ - GPIO_FN(PORT115_I2C_SCL2), \ - GPIO_FN(PORT115_I2C_SCL3), - GPIO_FN(HSI_RX_WAKE), \ - GPIO_FN(BBIF1_RSYNC), \ - GPIO_FN(PORT116_I2C_SDA2), \ - GPIO_FN(PORT116_I2C_SDA3), - GPIO_FN(HSI_RX_FLAG), \ - GPIO_FN(BBIF1_SS1), \ - GPIO_FN(BBIF1_FLOW), - GPIO_FN(HSI_TX_FLAG), - GPIO_FN(VIO_VD), \ - GPIO_FN(PORT128_LCD2VSYN), \ - GPIO_FN(VIO2_VD), \ - GPIO_FN(LCD2D0), - - GPIO_FN(VIO_HD), \ - GPIO_FN(PORT129_LCD2HSYN), \ - GPIO_FN(PORT129_LCD2CS_), \ - GPIO_FN(VIO2_HD), \ - GPIO_FN(LCD2D1), - GPIO_FN(VIO_D0), \ - GPIO_FN(PORT130_MSIOF2_RXD), \ - GPIO_FN(LCD2D10), - GPIO_FN(VIO_D1), \ - GPIO_FN(PORT131_KEYOUT6), \ - GPIO_FN(PORT131_MSIOF2_SS1), \ - GPIO_FN(PORT131_KEYOUT11), \ - GPIO_FN(LCD2D11), - GPIO_FN(VIO_D2), \ - GPIO_FN(PORT132_KEYOUT7), \ - GPIO_FN(PORT132_MSIOF2_SS2), \ - GPIO_FN(PORT132_KEYOUT10), \ - GPIO_FN(LCD2D12), - GPIO_FN(VIO_D3), \ - GPIO_FN(MSIOF2_TSYNC), \ - GPIO_FN(LCD2D13), - GPIO_FN(VIO_D4), \ - GPIO_FN(MSIOF2_TXD), \ - GPIO_FN(LCD2D14), - GPIO_FN(VIO_D5), \ - GPIO_FN(MSIOF2_TSCK), \ - GPIO_FN(LCD2D15), - GPIO_FN(VIO_D6), \ - GPIO_FN(PORT136_KEYOUT8), \ - GPIO_FN(LCD2D16), - GPIO_FN(VIO_D7), \ - GPIO_FN(PORT137_KEYOUT9), \ - GPIO_FN(LCD2D17), - GPIO_FN(VIO_D8), \ - GPIO_FN(PORT138_KEYOUT8), \ - GPIO_FN(VIO2_D0), \ - GPIO_FN(LCD2D6), - GPIO_FN(VIO_D9), \ - GPIO_FN(PORT139_KEYOUT9), \ - GPIO_FN(VIO2_D1), \ - GPIO_FN(LCD2D7), - GPIO_FN(VIO_D10), \ - GPIO_FN(TPU0TO2), \ - GPIO_FN(VIO2_D2), \ - GPIO_FN(LCD2D8), - GPIO_FN(VIO_D11), \ - GPIO_FN(TPU0TO3), \ - GPIO_FN(VIO2_D3), \ - GPIO_FN(LCD2D9), - GPIO_FN(VIO_D12), \ - GPIO_FN(PORT142_KEYOUT10), \ - GPIO_FN(VIO2_D4), \ - GPIO_FN(LCD2D2), - GPIO_FN(VIO_D13), \ - GPIO_FN(PORT143_KEYOUT11), \ - GPIO_FN(PORT143_KEYOUT6), \ - GPIO_FN(VIO2_D5), \ - GPIO_FN(LCD2D3), - GPIO_FN(VIO_D14), \ - GPIO_FN(PORT144_KEYOUT7), \ - GPIO_FN(VIO2_D6), \ - GPIO_FN(LCD2D4), - GPIO_FN(VIO_D15), \ - GPIO_FN(TPU1TO3), \ - GPIO_FN(PORT145_LCD2DISP), \ - GPIO_FN(PORT145_LCD2RS), \ - GPIO_FN(VIO2_D7), \ - GPIO_FN(LCD2D5), - GPIO_FN(VIO_CLK), \ - GPIO_FN(LCD2DCK), \ - GPIO_FN(PORT146_LCD2WR_), \ - GPIO_FN(VIO2_CLK), \ - GPIO_FN(LCD2D18), - GPIO_FN(VIO_FIELD), \ - GPIO_FN(LCD2RD_), \ - GPIO_FN(VIO2_FIELD), \ - GPIO_FN(LCD2D19), - GPIO_FN(VIO_CKO), - GPIO_FN(A27), \ - GPIO_FN(PORT149_RDWR), \ - GPIO_FN(MFG0_IN1), \ - GPIO_FN(PORT149_KEYOUT9), - GPIO_FN(MFG0_IN2), - GPIO_FN(TS_SPSYNC3), \ - GPIO_FN(MSIOF2_RSCK), - GPIO_FN(TS_SDAT3), \ - GPIO_FN(MSIOF2_RSYNC), - GPIO_FN(TPU1TO2), \ - GPIO_FN(TS_SDEN3), \ - GPIO_FN(PORT153_MSIOF2_SS1), - GPIO_FN(SCIFA2_TXD1), \ - GPIO_FN(MSIOF2_MCK0), - GPIO_FN(SCIFA2_RXD1), \ - GPIO_FN(MSIOF2_MCK1), - GPIO_FN(SCIFA2_RTS1_), \ - GPIO_FN(PORT156_MSIOF2_SS2), - GPIO_FN(SCIFA2_CTS1_), \ - GPIO_FN(PORT157_MSIOF2_RXD), - GPIO_FN(DINT_), \ - GPIO_FN(SCIFA2_SCK1), \ - GPIO_FN(TS_SCK3), - GPIO_FN(PORT159_SCIFB_SCK), \ - GPIO_FN(PORT159_SCIFA5_SCK), \ - GPIO_FN(NMI), - GPIO_FN(PORT160_SCIFB_TXD), \ - GPIO_FN(PORT160_SCIFA5_TXD), - GPIO_FN(PORT161_SCIFB_CTS_), \ - GPIO_FN(PORT161_SCIFA5_CTS_), - GPIO_FN(PORT162_SCIFB_RXD), \ - GPIO_FN(PORT162_SCIFA5_RXD), - GPIO_FN(PORT163_SCIFB_RTS_), \ - GPIO_FN(PORT163_SCIFA5_RTS_), \ - GPIO_FN(TPU3TO0), - GPIO_FN(LCDD0), - GPIO_FN(LCDD1), \ - GPIO_FN(PORT193_SCIFA5_CTS_), \ - GPIO_FN(BBIF2_TSYNC1), - GPIO_FN(LCDD2), \ - GPIO_FN(PORT194_SCIFA5_RTS_), \ - GPIO_FN(BBIF2_TSCK1), - GPIO_FN(LCDD3), \ - GPIO_FN(PORT195_SCIFA5_RXD), \ - GPIO_FN(BBIF2_TXD1), - GPIO_FN(LCDD4), \ - GPIO_FN(PORT196_SCIFA5_TXD), - GPIO_FN(LCDD5), \ - GPIO_FN(PORT197_SCIFA5_SCK), \ - GPIO_FN(MFG2_OUT2), \ - GPIO_FN(TPU2TO1), - GPIO_FN(LCDD6), - GPIO_FN(LCDD7), \ - GPIO_FN(TPU4TO1), \ - GPIO_FN(MFG4_OUT2), - GPIO_FN(LCDD8), \ - GPIO_FN(D16), - GPIO_FN(LCDD9), \ - GPIO_FN(D17), - GPIO_FN(LCDD10), \ - GPIO_FN(D18), - GPIO_FN(LCDD11), \ - GPIO_FN(D19), - GPIO_FN(LCDD12), \ - GPIO_FN(D20), - GPIO_FN(LCDD13), \ - GPIO_FN(D21), - GPIO_FN(LCDD14), \ - GPIO_FN(D22), - GPIO_FN(LCDD15), \ - GPIO_FN(PORT207_MSIOF0L_SS1), \ - GPIO_FN(D23), - GPIO_FN(LCDD16), \ - GPIO_FN(PORT208_MSIOF0L_SS2), \ - GPIO_FN(D24), - GPIO_FN(LCDD17), \ - GPIO_FN(D25), - GPIO_FN(LCDD18), \ - GPIO_FN(DREQ2), \ - GPIO_FN(PORT210_MSIOF0L_SS1), \ - GPIO_FN(D26), - GPIO_FN(LCDD19), \ - GPIO_FN(PORT211_MSIOF0L_SS2), \ - GPIO_FN(D27), - GPIO_FN(LCDD20), \ - GPIO_FN(TS_SPSYNC1), \ - GPIO_FN(MSIOF0L_MCK0), \ - GPIO_FN(D28), - GPIO_FN(LCDD21), \ - GPIO_FN(TS_SDAT1), \ - GPIO_FN(MSIOF0L_MCK1), \ - GPIO_FN(D29), - GPIO_FN(LCDD22), \ - GPIO_FN(TS_SDEN1), \ - GPIO_FN(MSIOF0L_RSCK), \ - GPIO_FN(D30), - GPIO_FN(LCDD23), \ - GPIO_FN(TS_SCK1), \ - GPIO_FN(MSIOF0L_RSYNC), \ - GPIO_FN(D31), - GPIO_FN(LCDDCK), \ - GPIO_FN(LCDWR_), - GPIO_FN(LCDRD_), \ - GPIO_FN(DACK2), \ - GPIO_FN(PORT217_LCD2RS), \ - GPIO_FN(MSIOF0L_TSYNC), \ - GPIO_FN(VIO2_FIELD3), \ - GPIO_FN(PORT217_LCD2DISP), - GPIO_FN(LCDHSYN), \ - GPIO_FN(LCDCS_), \ - GPIO_FN(LCDCS2_), \ - GPIO_FN(DACK3), \ - GPIO_FN(PORT218_VIO_CKOR), - GPIO_FN(LCDDISP), \ - GPIO_FN(LCDRS), \ - GPIO_FN(PORT219_LCD2WR_), \ - GPIO_FN(DREQ3), \ - GPIO_FN(MSIOF0L_TSCK), \ - GPIO_FN(VIO2_CLK3), \ - GPIO_FN(LCD2DCK_2), - GPIO_FN(LCDVSYN), \ - GPIO_FN(LCDVSYN2), - GPIO_FN(LCDLCLK), \ - GPIO_FN(DREQ1), \ - GPIO_FN(PORT221_LCD2CS_), \ - GPIO_FN(PWEN), \ - GPIO_FN(MSIOF0L_RXD), \ - GPIO_FN(VIO2_HD3), \ - GPIO_FN(PORT221_LCD2HSYN), - GPIO_FN(LCDDON), \ - GPIO_FN(LCDDON2), \ - GPIO_FN(DACK1), \ - GPIO_FN(OVCN), \ - GPIO_FN(MSIOF0L_TXD), \ - GPIO_FN(VIO2_VD3), \ - GPIO_FN(PORT222_LCD2VSYN), - - GPIO_FN(SCIFA1_TXD), \ - GPIO_FN(OVCN2), - GPIO_FN(EXTLP), \ - GPIO_FN(SCIFA1_SCK), \ - GPIO_FN(PORT226_VIO_CKO2), - GPIO_FN(SCIFA1_RTS_), \ - GPIO_FN(IDIN), - GPIO_FN(SCIFA1_RXD), - GPIO_FN(SCIFA1_CTS_), \ - GPIO_FN(MFG1_IN1), - GPIO_FN(MSIOF1_TXD), \ - GPIO_FN(SCIFA2_TXD2), - GPIO_FN(MSIOF1_TSYNC), \ - GPIO_FN(SCIFA2_CTS2_), - GPIO_FN(MSIOF1_TSCK), \ - GPIO_FN(SCIFA2_SCK2), - GPIO_FN(MSIOF1_RXD), \ - GPIO_FN(SCIFA2_RXD2), - GPIO_FN(MSIOF1_RSCK), \ - GPIO_FN(SCIFA2_RTS2_), \ - GPIO_FN(VIO2_CLK2), \ - GPIO_FN(LCD2D20), - GPIO_FN(MSIOF1_RSYNC), \ - GPIO_FN(MFG1_IN2), \ - GPIO_FN(VIO2_VD2), \ - GPIO_FN(LCD2D21), - GPIO_FN(MSIOF1_MCK0), \ - GPIO_FN(PORT236_I2C_SDA2), - GPIO_FN(MSIOF1_MCK1), \ - GPIO_FN(PORT237_I2C_SCL2), - GPIO_FN(MSIOF1_SS1), \ - GPIO_FN(VIO2_FIELD2), \ - GPIO_FN(LCD2D22), - GPIO_FN(MSIOF1_SS2), \ - GPIO_FN(VIO2_HD2), \ - GPIO_FN(LCD2D23), - GPIO_FN(SCIFA6_TXD), - GPIO_FN(PORT241_IRDA_OUT), \ - GPIO_FN(PORT241_IROUT), \ - GPIO_FN(MFG4_OUT1), \ - GPIO_FN(TPU4TO0), - GPIO_FN(PORT242_IRDA_IN), \ - GPIO_FN(MFG4_IN2), - GPIO_FN(PORT243_IRDA_FIRSEL), \ - GPIO_FN(PORT243_VIO_CKO2), - GPIO_FN(PORT244_SCIFA5_CTS_), \ - GPIO_FN(MFG2_IN1), \ - GPIO_FN(PORT244_SCIFB_CTS_), \ - GPIO_FN(MSIOF2R_RXD), - GPIO_FN(PORT245_SCIFA5_RTS_), \ - GPIO_FN(MFG2_IN2), \ - GPIO_FN(PORT245_SCIFB_RTS_), \ - GPIO_FN(MSIOF2R_TXD), - GPIO_FN(PORT246_SCIFA5_RXD), \ - GPIO_FN(MFG1_OUT1), \ - GPIO_FN(PORT246_SCIFB_RXD), \ - GPIO_FN(TPU1TO0), - GPIO_FN(PORT247_SCIFA5_TXD), \ - GPIO_FN(MFG3_OUT2), \ - GPIO_FN(PORT247_SCIFB_TXD), \ - GPIO_FN(TPU3TO1), - GPIO_FN(PORT248_SCIFA5_SCK), \ - GPIO_FN(MFG2_OUT1), \ - GPIO_FN(PORT248_SCIFB_SCK), \ - GPIO_FN(TPU2TO0), \ - GPIO_FN(PORT248_I2C_SCL3), \ - GPIO_FN(MSIOF2R_TSCK), - GPIO_FN(PORT249_IROUT), \ - GPIO_FN(MFG4_IN1), \ - GPIO_FN(PORT249_I2C_SDA3), \ - GPIO_FN(MSIOF2R_TSYNC), - GPIO_FN(SDHICLK0), - GPIO_FN(SDHICD0), - GPIO_FN(SDHID0_0), - GPIO_FN(SDHID0_1), - GPIO_FN(SDHID0_2), - GPIO_FN(SDHID0_3), - GPIO_FN(SDHICMD0), - GPIO_FN(SDHIWP0), - GPIO_FN(SDHICLK1), - GPIO_FN(SDHID1_0), \ - GPIO_FN(TS_SPSYNC2), - GPIO_FN(SDHID1_1), \ - GPIO_FN(TS_SDAT2), - GPIO_FN(SDHID1_2), \ - GPIO_FN(TS_SDEN2), - GPIO_FN(SDHID1_3), \ - GPIO_FN(TS_SCK2), - GPIO_FN(SDHICMD1), - GPIO_FN(SDHICLK2), - GPIO_FN(SDHID2_0), \ - GPIO_FN(TS_SPSYNC4), - GPIO_FN(SDHID2_1), \ - GPIO_FN(TS_SDAT4), - GPIO_FN(SDHID2_2), \ - GPIO_FN(TS_SDEN4), - GPIO_FN(SDHID2_3), \ - GPIO_FN(TS_SCK4), - GPIO_FN(SDHICMD2), - GPIO_FN(MMCCLK0), - GPIO_FN(MMCD0_0), - GPIO_FN(MMCD0_1), - GPIO_FN(MMCD0_2), - GPIO_FN(MMCD0_3), - GPIO_FN(MMCD0_4), \ - GPIO_FN(TS_SPSYNC5), - GPIO_FN(MMCD0_5), \ - GPIO_FN(TS_SDAT5), - GPIO_FN(MMCD0_6), \ - GPIO_FN(TS_SDEN5), - GPIO_FN(MMCD0_7), \ - GPIO_FN(TS_SCK5), - GPIO_FN(MMCCMD0), - GPIO_FN(RESETOUTS_), \ - GPIO_FN(EXTAL2OUT), - GPIO_FN(MCP_WAIT__MCP_FRB), - GPIO_FN(MCP_CKO), \ - GPIO_FN(MMCCLK1), - GPIO_FN(MCP_D15_MCP_NAF15), - GPIO_FN(MCP_D14_MCP_NAF14), - GPIO_FN(MCP_D13_MCP_NAF13), - GPIO_FN(MCP_D12_MCP_NAF12), - GPIO_FN(MCP_D11_MCP_NAF11), - GPIO_FN(MCP_D10_MCP_NAF10), - GPIO_FN(MCP_D9_MCP_NAF9), - GPIO_FN(MCP_D8_MCP_NAF8), \ - GPIO_FN(MMCCMD1), - GPIO_FN(MCP_D7_MCP_NAF7), \ - GPIO_FN(MMCD1_7), - - GPIO_FN(MCP_D6_MCP_NAF6), \ - GPIO_FN(MMCD1_6), - GPIO_FN(MCP_D5_MCP_NAF5), \ - GPIO_FN(MMCD1_5), - GPIO_FN(MCP_D4_MCP_NAF4), \ - GPIO_FN(MMCD1_4), - GPIO_FN(MCP_D3_MCP_NAF3), \ - GPIO_FN(MMCD1_3), - GPIO_FN(MCP_D2_MCP_NAF2), \ - GPIO_FN(MMCD1_2), - GPIO_FN(MCP_D1_MCP_NAF1), \ - GPIO_FN(MMCD1_1), - GPIO_FN(MCP_D0_MCP_NAF0), \ - GPIO_FN(MMCD1_0), - GPIO_FN(MCP_NBRSTOUT_), - GPIO_FN(MCP_WE0__MCP_FWE), \ - GPIO_FN(MCP_RDWR_MCP_FWE), - - /* MSEL2 special cases */ - GPIO_FN(TSIF2_TS_XX1), - GPIO_FN(TSIF2_TS_XX2), - GPIO_FN(TSIF2_TS_XX3), - GPIO_FN(TSIF2_TS_XX4), - GPIO_FN(TSIF2_TS_XX5), - GPIO_FN(TSIF1_TS_XX1), - GPIO_FN(TSIF1_TS_XX2), - GPIO_FN(TSIF1_TS_XX3), - GPIO_FN(TSIF1_TS_XX4), - GPIO_FN(TSIF1_TS_XX5), - GPIO_FN(TSIF0_TS_XX1), - GPIO_FN(TSIF0_TS_XX2), - GPIO_FN(TSIF0_TS_XX3), - GPIO_FN(TSIF0_TS_XX4), - GPIO_FN(TSIF0_TS_XX5), - GPIO_FN(MST1_TS_XX1), - GPIO_FN(MST1_TS_XX2), - GPIO_FN(MST1_TS_XX3), - GPIO_FN(MST1_TS_XX4), - GPIO_FN(MST1_TS_XX5), - GPIO_FN(MST0_TS_XX1), - GPIO_FN(MST0_TS_XX2), - GPIO_FN(MST0_TS_XX3), - GPIO_FN(MST0_TS_XX4), - GPIO_FN(MST0_TS_XX5), - - /* MSEL3 special cases */ - GPIO_FN(SDHI0_VCCQ_MC0_ON), - GPIO_FN(SDHI0_VCCQ_MC0_OFF), - GPIO_FN(DEBUG_MON_VIO), - GPIO_FN(DEBUG_MON_LCDD), - GPIO_FN(LCDC_LCDC0), - GPIO_FN(LCDC_LCDC1), - - /* MSEL4 special cases */ - GPIO_FN(IRQ9_MEM_INT), - GPIO_FN(IRQ9_MCP_INT), - GPIO_FN(A11), - GPIO_FN(KEYOUT8), - GPIO_FN(TPU4TO3), - GPIO_FN(RESETA_N_PU_ON), - GPIO_FN(RESETA_N_PU_OFF), - GPIO_FN(EDBGREQ_PD), - GPIO_FN(EDBGREQ_PU), - - /* Functions with pull-ups */ - GPIO_FN(KEYIN0_PU), - GPIO_FN(KEYIN1_PU), - GPIO_FN(KEYIN2_PU), - GPIO_FN(KEYIN3_PU), - GPIO_FN(KEYIN4_PU), - GPIO_FN(KEYIN5_PU), - GPIO_FN(KEYIN6_PU), - GPIO_FN(KEYIN7_PU), - GPIO_FN(SDHICD0_PU), - GPIO_FN(SDHID0_0_PU), - GPIO_FN(SDHID0_1_PU), - GPIO_FN(SDHID0_2_PU), - GPIO_FN(SDHID0_3_PU), - GPIO_FN(SDHICMD0_PU), - GPIO_FN(SDHIWP0_PU), - GPIO_FN(SDHID1_0_PU), - GPIO_FN(SDHID1_1_PU), - GPIO_FN(SDHID1_2_PU), - GPIO_FN(SDHID1_3_PU), - GPIO_FN(SDHICMD1_PU), - GPIO_FN(SDHID2_0_PU), - GPIO_FN(SDHID2_1_PU), - GPIO_FN(SDHID2_2_PU), - GPIO_FN(SDHID2_3_PU), - GPIO_FN(SDHICMD2_PU), - GPIO_FN(MMCCMD0_PU), - GPIO_FN(MMCCMD1_PU), - GPIO_FN(MMCD0_0_PU), - GPIO_FN(MMCD0_1_PU), - GPIO_FN(MMCD0_2_PU), - GPIO_FN(MMCD0_3_PU), - GPIO_FN(MMCD0_4_PU), - GPIO_FN(MMCD0_5_PU), - GPIO_FN(MMCD0_6_PU), - GPIO_FN(MMCD0_7_PU), - GPIO_FN(FSIACK_PU), - GPIO_FN(FSIAILR_PU), - GPIO_FN(FSIAIBT_PU), - GPIO_FN(FSIAISLD_PU), -}; - -static struct pinmux_cfg_reg pinmux_config_regs[] = { - PORTCR(0, 0xe6050000), /* PORT0CR */ - PORTCR(1, 0xe6050001), /* PORT1CR */ - PORTCR(2, 0xe6050002), /* PORT2CR */ - PORTCR(3, 0xe6050003), /* PORT3CR */ - PORTCR(4, 0xe6050004), /* PORT4CR */ - PORTCR(5, 0xe6050005), /* PORT5CR */ - PORTCR(6, 0xe6050006), /* PORT6CR */ - PORTCR(7, 0xe6050007), /* PORT7CR */ - PORTCR(8, 0xe6050008), /* PORT8CR */ - PORTCR(9, 0xe6050009), /* PORT9CR */ - - PORTCR(10, 0xe605000a), /* PORT10CR */ - PORTCR(11, 0xe605000b), /* PORT11CR */ - PORTCR(12, 0xe605000c), /* PORT12CR */ - PORTCR(13, 0xe605000d), /* PORT13CR */ - PORTCR(14, 0xe605000e), /* PORT14CR */ - PORTCR(15, 0xe605000f), /* PORT15CR */ - PORTCR(16, 0xe6050010), /* PORT16CR */ - PORTCR(17, 0xe6050011), /* PORT17CR */ - PORTCR(18, 0xe6050012), /* PORT18CR */ - PORTCR(19, 0xe6050013), /* PORT19CR */ - - PORTCR(20, 0xe6050014), /* PORT20CR */ - PORTCR(21, 0xe6050015), /* PORT21CR */ - PORTCR(22, 0xe6050016), /* PORT22CR */ - PORTCR(23, 0xe6050017), /* PORT23CR */ - PORTCR(24, 0xe6050018), /* PORT24CR */ - PORTCR(25, 0xe6050019), /* PORT25CR */ - PORTCR(26, 0xe605001a), /* PORT26CR */ - PORTCR(27, 0xe605001b), /* PORT27CR */ - PORTCR(28, 0xe605001c), /* PORT28CR */ - PORTCR(29, 0xe605001d), /* PORT29CR */ - - PORTCR(30, 0xe605001e), /* PORT30CR */ - PORTCR(31, 0xe605001f), /* PORT31CR */ - PORTCR(32, 0xe6051020), /* PORT32CR */ - PORTCR(33, 0xe6051021), /* PORT33CR */ - PORTCR(34, 0xe6051022), /* PORT34CR */ - PORTCR(35, 0xe6051023), /* PORT35CR */ - PORTCR(36, 0xe6051024), /* PORT36CR */ - PORTCR(37, 0xe6051025), /* PORT37CR */ - PORTCR(38, 0xe6051026), /* PORT38CR */ - PORTCR(39, 0xe6051027), /* PORT39CR */ - - PORTCR(40, 0xe6051028), /* PORT40CR */ - PORTCR(41, 0xe6051029), /* PORT41CR */ - PORTCR(42, 0xe605102a), /* PORT42CR */ - PORTCR(43, 0xe605102b), /* PORT43CR */ - PORTCR(44, 0xe605102c), /* PORT44CR */ - PORTCR(45, 0xe605102d), /* PORT45CR */ - PORTCR(46, 0xe605102e), /* PORT46CR */ - PORTCR(47, 0xe605102f), /* PORT47CR */ - PORTCR(48, 0xe6051030), /* PORT48CR */ - PORTCR(49, 0xe6051031), /* PORT49CR */ - - PORTCR(50, 0xe6051032), /* PORT50CR */ - PORTCR(51, 0xe6051033), /* PORT51CR */ - PORTCR(52, 0xe6051034), /* PORT52CR */ - PORTCR(53, 0xe6051035), /* PORT53CR */ - PORTCR(54, 0xe6051036), /* PORT54CR */ - PORTCR(55, 0xe6051037), /* PORT55CR */ - PORTCR(56, 0xe6051038), /* PORT56CR */ - PORTCR(57, 0xe6051039), /* PORT57CR */ - PORTCR(58, 0xe605103a), /* PORT58CR */ - PORTCR(59, 0xe605103b), /* PORT59CR */ - - PORTCR(60, 0xe605103c), /* PORT60CR */ - PORTCR(61, 0xe605103d), /* PORT61CR */ - PORTCR(62, 0xe605103e), /* PORT62CR */ - PORTCR(63, 0xe605103f), /* PORT63CR */ - PORTCR(64, 0xe6051040), /* PORT64CR */ - PORTCR(65, 0xe6051041), /* PORT65CR */ - PORTCR(66, 0xe6051042), /* PORT66CR */ - PORTCR(67, 0xe6051043), /* PORT67CR */ - PORTCR(68, 0xe6051044), /* PORT68CR */ - PORTCR(69, 0xe6051045), /* PORT69CR */ - - PORTCR(70, 0xe6051046), /* PORT70CR */ - PORTCR(71, 0xe6051047), /* PORT71CR */ - PORTCR(72, 0xe6051048), /* PORT72CR */ - PORTCR(73, 0xe6051049), /* PORT73CR */ - PORTCR(74, 0xe605104a), /* PORT74CR */ - PORTCR(75, 0xe605104b), /* PORT75CR */ - PORTCR(76, 0xe605104c), /* PORT76CR */ - PORTCR(77, 0xe605104d), /* PORT77CR */ - PORTCR(78, 0xe605104e), /* PORT78CR */ - PORTCR(79, 0xe605104f), /* PORT79CR */ - - PORTCR(80, 0xe6051050), /* PORT80CR */ - PORTCR(81, 0xe6051051), /* PORT81CR */ - PORTCR(82, 0xe6051052), /* PORT82CR */ - PORTCR(83, 0xe6051053), /* PORT83CR */ - PORTCR(84, 0xe6051054), /* PORT84CR */ - PORTCR(85, 0xe6051055), /* PORT85CR */ - PORTCR(86, 0xe6051056), /* PORT86CR */ - PORTCR(87, 0xe6051057), /* PORT87CR */ - PORTCR(88, 0xe6051058), /* PORT88CR */ - PORTCR(89, 0xe6051059), /* PORT89CR */ - - PORTCR(90, 0xe605105a), /* PORT90CR */ - PORTCR(91, 0xe605105b), /* PORT91CR */ - PORTCR(92, 0xe605105c), /* PORT92CR */ - PORTCR(93, 0xe605105d), /* PORT93CR */ - PORTCR(94, 0xe605105e), /* PORT94CR */ - PORTCR(95, 0xe605105f), /* PORT95CR */ - PORTCR(96, 0xe6052060), /* PORT96CR */ - PORTCR(97, 0xe6052061), /* PORT97CR */ - PORTCR(98, 0xe6052062), /* PORT98CR */ - PORTCR(99, 0xe6052063), /* PORT99CR */ - - PORTCR(100, 0xe6052064), /* PORT100CR */ - PORTCR(101, 0xe6052065), /* PORT101CR */ - PORTCR(102, 0xe6052066), /* PORT102CR */ - PORTCR(103, 0xe6052067), /* PORT103CR */ - PORTCR(104, 0xe6052068), /* PORT104CR */ - PORTCR(105, 0xe6052069), /* PORT105CR */ - PORTCR(106, 0xe605206a), /* PORT106CR */ - PORTCR(107, 0xe605206b), /* PORT107CR */ - PORTCR(108, 0xe605206c), /* PORT108CR */ - PORTCR(109, 0xe605206d), /* PORT109CR */ - - PORTCR(110, 0xe605206e), /* PORT110CR */ - PORTCR(111, 0xe605206f), /* PORT111CR */ - PORTCR(112, 0xe6052070), /* PORT112CR */ - PORTCR(113, 0xe6052071), /* PORT113CR */ - PORTCR(114, 0xe6052072), /* PORT114CR */ - PORTCR(115, 0xe6052073), /* PORT115CR */ - PORTCR(116, 0xe6052074), /* PORT116CR */ - PORTCR(117, 0xe6052075), /* PORT117CR */ - PORTCR(118, 0xe6052076), /* PORT118CR */ - - PORTCR(128, 0xe6052080), /* PORT128CR */ - PORTCR(129, 0xe6052081), /* PORT129CR */ - - PORTCR(130, 0xe6052082), /* PORT130CR */ - PORTCR(131, 0xe6052083), /* PORT131CR */ - PORTCR(132, 0xe6052084), /* PORT132CR */ - PORTCR(133, 0xe6052085), /* PORT133CR */ - PORTCR(134, 0xe6052086), /* PORT134CR */ - PORTCR(135, 0xe6052087), /* PORT135CR */ - PORTCR(136, 0xe6052088), /* PORT136CR */ - PORTCR(137, 0xe6052089), /* PORT137CR */ - PORTCR(138, 0xe605208a), /* PORT138CR */ - PORTCR(139, 0xe605208b), /* PORT139CR */ - - PORTCR(140, 0xe605208c), /* PORT140CR */ - PORTCR(141, 0xe605208d), /* PORT141CR */ - PORTCR(142, 0xe605208e), /* PORT142CR */ - PORTCR(143, 0xe605208f), /* PORT143CR */ - PORTCR(144, 0xe6052090), /* PORT144CR */ - PORTCR(145, 0xe6052091), /* PORT145CR */ - PORTCR(146, 0xe6052092), /* PORT146CR */ - PORTCR(147, 0xe6052093), /* PORT147CR */ - PORTCR(148, 0xe6052094), /* PORT148CR */ - PORTCR(149, 0xe6052095), /* PORT149CR */ - - PORTCR(150, 0xe6052096), /* PORT150CR */ - PORTCR(151, 0xe6052097), /* PORT151CR */ - PORTCR(152, 0xe6052098), /* PORT152CR */ - PORTCR(153, 0xe6052099), /* PORT153CR */ - PORTCR(154, 0xe605209a), /* PORT154CR */ - PORTCR(155, 0xe605209b), /* PORT155CR */ - PORTCR(156, 0xe605209c), /* PORT156CR */ - PORTCR(157, 0xe605209d), /* PORT157CR */ - PORTCR(158, 0xe605209e), /* PORT158CR */ - PORTCR(159, 0xe605209f), /* PORT159CR */ - - PORTCR(160, 0xe60520a0), /* PORT160CR */ - PORTCR(161, 0xe60520a1), /* PORT161CR */ - PORTCR(162, 0xe60520a2), /* PORT162CR */ - PORTCR(163, 0xe60520a3), /* PORT163CR */ - PORTCR(164, 0xe60520a4), /* PORT164CR */ - - PORTCR(192, 0xe60520c0), /* PORT192CR */ - PORTCR(193, 0xe60520c1), /* PORT193CR */ - PORTCR(194, 0xe60520c2), /* PORT194CR */ - PORTCR(195, 0xe60520c3), /* PORT195CR */ - PORTCR(196, 0xe60520c4), /* PORT196CR */ - PORTCR(197, 0xe60520c5), /* PORT197CR */ - PORTCR(198, 0xe60520c6), /* PORT198CR */ - PORTCR(199, 0xe60520c7), /* PORT199CR */ - - PORTCR(200, 0xe60520c8), /* PORT200CR */ - PORTCR(201, 0xe60520c9), /* PORT201CR */ - PORTCR(202, 0xe60520ca), /* PORT202CR */ - PORTCR(203, 0xe60520cb), /* PORT203CR */ - PORTCR(204, 0xe60520cc), /* PORT204CR */ - PORTCR(205, 0xe60520cd), /* PORT205CR */ - PORTCR(206, 0xe60520ce), /* PORT206CR */ - PORTCR(207, 0xe60520cf), /* PORT207CR */ - PORTCR(208, 0xe60520d0), /* PORT208CR */ - PORTCR(209, 0xe60520d1), /* PORT209CR */ - - PORTCR(210, 0xe60520d2), /* PORT210CR */ - PORTCR(211, 0xe60520d3), /* PORT211CR */ - PORTCR(212, 0xe60520d4), /* PORT212CR */ - PORTCR(213, 0xe60520d5), /* PORT213CR */ - PORTCR(214, 0xe60520d6), /* PORT214CR */ - PORTCR(215, 0xe60520d7), /* PORT215CR */ - PORTCR(216, 0xe60520d8), /* PORT216CR */ - PORTCR(217, 0xe60520d9), /* PORT217CR */ - PORTCR(218, 0xe60520da), /* PORT218CR */ - PORTCR(219, 0xe60520db), /* PORT219CR */ - - PORTCR(220, 0xe60520dc), /* PORT220CR */ - PORTCR(221, 0xe60520dd), /* PORT221CR */ - PORTCR(222, 0xe60520de), /* PORT222CR */ - PORTCR(223, 0xe60520df), /* PORT223CR */ - PORTCR(224, 0xe60530e0), /* PORT224CR */ - PORTCR(225, 0xe60530e1), /* PORT225CR */ - PORTCR(226, 0xe60530e2), /* PORT226CR */ - PORTCR(227, 0xe60530e3), /* PORT227CR */ - PORTCR(228, 0xe60530e4), /* PORT228CR */ - PORTCR(229, 0xe60530e5), /* PORT229CR */ - - PORTCR(230, 0xe60530e6), /* PORT230CR */ - PORTCR(231, 0xe60530e7), /* PORT231CR */ - PORTCR(232, 0xe60530e8), /* PORT232CR */ - PORTCR(233, 0xe60530e9), /* PORT233CR */ - PORTCR(234, 0xe60530ea), /* PORT234CR */ - PORTCR(235, 0xe60530eb), /* PORT235CR */ - PORTCR(236, 0xe60530ec), /* PORT236CR */ - PORTCR(237, 0xe60530ed), /* PORT237CR */ - PORTCR(238, 0xe60530ee), /* PORT238CR */ - PORTCR(239, 0xe60530ef), /* PORT239CR */ - - PORTCR(240, 0xe60530f0), /* PORT240CR */ - PORTCR(241, 0xe60530f1), /* PORT241CR */ - PORTCR(242, 0xe60530f2), /* PORT242CR */ - PORTCR(243, 0xe60530f3), /* PORT243CR */ - PORTCR(244, 0xe60530f4), /* PORT244CR */ - PORTCR(245, 0xe60530f5), /* PORT245CR */ - PORTCR(246, 0xe60530f6), /* PORT246CR */ - PORTCR(247, 0xe60530f7), /* PORT247CR */ - PORTCR(248, 0xe60530f8), /* PORT248CR */ - PORTCR(249, 0xe60530f9), /* PORT249CR */ - - PORTCR(250, 0xe60530fa), /* PORT250CR */ - PORTCR(251, 0xe60530fb), /* PORT251CR */ - PORTCR(252, 0xe60530fc), /* PORT252CR */ - PORTCR(253, 0xe60530fd), /* PORT253CR */ - PORTCR(254, 0xe60530fe), /* PORT254CR */ - PORTCR(255, 0xe60530ff), /* PORT255CR */ - PORTCR(256, 0xe6053100), /* PORT256CR */ - PORTCR(257, 0xe6053101), /* PORT257CR */ - PORTCR(258, 0xe6053102), /* PORT258CR */ - PORTCR(259, 0xe6053103), /* PORT259CR */ - - PORTCR(260, 0xe6053104), /* PORT260CR */ - PORTCR(261, 0xe6053105), /* PORT261CR */ - PORTCR(262, 0xe6053106), /* PORT262CR */ - PORTCR(263, 0xe6053107), /* PORT263CR */ - PORTCR(264, 0xe6053108), /* PORT264CR */ - PORTCR(265, 0xe6053109), /* PORT265CR */ - PORTCR(266, 0xe605310a), /* PORT266CR */ - PORTCR(267, 0xe605310b), /* PORT267CR */ - PORTCR(268, 0xe605310c), /* PORT268CR */ - PORTCR(269, 0xe605310d), /* PORT269CR */ - - PORTCR(270, 0xe605310e), /* PORT270CR */ - PORTCR(271, 0xe605310f), /* PORT271CR */ - PORTCR(272, 0xe6053110), /* PORT272CR */ - PORTCR(273, 0xe6053111), /* PORT273CR */ - PORTCR(274, 0xe6053112), /* PORT274CR */ - PORTCR(275, 0xe6053113), /* PORT275CR */ - PORTCR(276, 0xe6053114), /* PORT276CR */ - PORTCR(277, 0xe6053115), /* PORT277CR */ - PORTCR(278, 0xe6053116), /* PORT278CR */ - PORTCR(279, 0xe6053117), /* PORT279CR */ - - PORTCR(280, 0xe6053118), /* PORT280CR */ - PORTCR(281, 0xe6053119), /* PORT281CR */ - PORTCR(282, 0xe605311a), /* PORT282CR */ - - PORTCR(288, 0xe6052120), /* PORT288CR */ - PORTCR(289, 0xe6052121), /* PORT289CR */ - - PORTCR(290, 0xe6052122), /* PORT290CR */ - PORTCR(291, 0xe6052123), /* PORT291CR */ - PORTCR(292, 0xe6052124), /* PORT292CR */ - PORTCR(293, 0xe6052125), /* PORT293CR */ - PORTCR(294, 0xe6052126), /* PORT294CR */ - PORTCR(295, 0xe6052127), /* PORT295CR */ - PORTCR(296, 0xe6052128), /* PORT296CR */ - PORTCR(297, 0xe6052129), /* PORT297CR */ - PORTCR(298, 0xe605212a), /* PORT298CR */ - PORTCR(299, 0xe605212b), /* PORT299CR */ - - PORTCR(300, 0xe605212c), /* PORT300CR */ - PORTCR(301, 0xe605212d), /* PORT301CR */ - PORTCR(302, 0xe605212e), /* PORT302CR */ - PORTCR(303, 0xe605212f), /* PORT303CR */ - PORTCR(304, 0xe6052130), /* PORT304CR */ - PORTCR(305, 0xe6052131), /* PORT305CR */ - PORTCR(306, 0xe6052132), /* PORT306CR */ - PORTCR(307, 0xe6052133), /* PORT307CR */ - PORTCR(308, 0xe6052134), /* PORT308CR */ - PORTCR(309, 0xe6052135), /* PORT309CR */ - - { PINMUX_CFG_REG("MSEL2CR", 0xe605801c, 32, 1) { - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1, - MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1, - MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1, - MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1, - 0, 0, - MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1, - MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1, - MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1, - MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1, - MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1, - MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1, - MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1, - MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1, - MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1, - MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1, - MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1, - MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1, - MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1, - MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1, - MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1, - } - }, - { PINMUX_CFG_REG("MSEL3CR", 0xe6058020, 32, 1) { - 0, 0, - 0, 0, - 0, 0, - MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - 0, 0, - MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1, - 0, 0, - 0, 0, - 0, 0, - MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1, - 0, 0, - MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1, - 0, 0, - 0, 0, - MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1, - 0, 0, - 0, 0, - 0, 0, - MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1, - 0, 0, - 0, 0, - } - }, - { PINMUX_CFG_REG("MSEL4CR", 0xe6058024, 32, 1) { - 0, 0, - 0, 0, - MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1, - 0, 0, - MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1, - MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1, - 0, 0, - 0, 0, - 0, 0, - MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1, - MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1, - MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1, - MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1, - 0, 0, - 0, 0, - 0, 0, - MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1, - 0, 0, - MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1, - MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1, - MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1, - MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1, - MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1, - MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1, - MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1, - 0, 0, - 0, 0, - MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1, - 0, 0, - 0, 0, - MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1, - 0, 0, - } - }, - { }, -}; - -static struct pinmux_data_reg pinmux_data_regs[] = { - { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) { - PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, - PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, - PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, - PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, - PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, - PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, - PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, - PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } - }, - { PINMUX_DATA_REG("PORTD063_032DR", 0xe6055000, 32) { - PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, - PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, - PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, - PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, - PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, - PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, - PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, - PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } - }, - { PINMUX_DATA_REG("PORTD095_064DR", 0xe6055004, 32) { - PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, - PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, - PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, - PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, - PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, - PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, - PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, - PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } - }, - { PINMUX_DATA_REG("PORTR127_096DR", 0xe6056000, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, PORT118_DATA, PORT117_DATA, PORT116_DATA, - PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, - PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, - PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, - PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, - PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } - }, - { PINMUX_DATA_REG("PORTR159_128DR", 0xe6056004, 32) { - PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, - PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, - PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, - PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, - PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, - PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, - PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, - PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } - }, - { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056008, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, PORT164_DATA, - PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } - }, - { PINMUX_DATA_REG("PORTR223_192DR", 0xe605600C, 32) { - PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA, - PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA, - PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA, - PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA, - PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, - PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, - PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, - PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } - }, - { PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) { - PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA, - PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA, - PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA, - PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA, - PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA, - PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA, - PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA, - PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA } - }, - { PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) { - 0, 0, 0, 0, - 0, PORT282_DATA, PORT281_DATA, PORT280_DATA, - PORT279_DATA, PORT278_DATA, PORT277_DATA, PORT276_DATA, - PORT275_DATA, PORT274_DATA, PORT273_DATA, PORT272_DATA, - PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA, - PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA, - PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA, - PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA } - }, - { PINMUX_DATA_REG("PORTR319_288DR", 0xe6056010, 32) { - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, PORT309_DATA, PORT308_DATA, - PORT307_DATA, PORT306_DATA, PORT305_DATA, PORT304_DATA, - PORT303_DATA, PORT302_DATA, PORT301_DATA, PORT300_DATA, - PORT299_DATA, PORT298_DATA, PORT297_DATA, PORT296_DATA, - PORT295_DATA, PORT294_DATA, PORT293_DATA, PORT292_DATA, - PORT291_DATA, PORT290_DATA, PORT289_DATA, PORT288_DATA } - }, - { }, -}; - -/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */ -#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5)) -#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5)) - -static struct pinmux_irq pinmux_irqs[] = { - PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0), - PINMUX_IRQ(EXT_IRQ16L(1), PORT10_FN0), - PINMUX_IRQ(EXT_IRQ16L(0), PORT11_FN0), - PINMUX_IRQ(EXT_IRQ16H(18), PORT13_FN0), - PINMUX_IRQ(EXT_IRQ16H(20), PORT14_FN0), - PINMUX_IRQ(EXT_IRQ16H(21), PORT15_FN0), - PINMUX_IRQ(EXT_IRQ16H(31), PORT26_FN0), - PINMUX_IRQ(EXT_IRQ16H(30), PORT27_FN0), - PINMUX_IRQ(EXT_IRQ16H(29), PORT28_FN0), - PINMUX_IRQ(EXT_IRQ16H(22), PORT40_FN0), - PINMUX_IRQ(EXT_IRQ16H(23), PORT53_FN0), - PINMUX_IRQ(EXT_IRQ16L(10), PORT54_FN0), - PINMUX_IRQ(EXT_IRQ16L(9), PORT56_FN0), - PINMUX_IRQ(EXT_IRQ16H(26), PORT115_FN0), - PINMUX_IRQ(EXT_IRQ16H(27), PORT116_FN0), - PINMUX_IRQ(EXT_IRQ16H(28), PORT117_FN0), - PINMUX_IRQ(EXT_IRQ16H(24), PORT118_FN0), - PINMUX_IRQ(EXT_IRQ16L(6), PORT147_FN0), - PINMUX_IRQ(EXT_IRQ16L(2), PORT149_FN0), - PINMUX_IRQ(EXT_IRQ16L(7), PORT150_FN0), - PINMUX_IRQ(EXT_IRQ16L(12), PORT156_FN0), - PINMUX_IRQ(EXT_IRQ16L(4), PORT159_FN0), - PINMUX_IRQ(EXT_IRQ16H(25), PORT164_FN0), - PINMUX_IRQ(EXT_IRQ16L(8), PORT223_FN0), - PINMUX_IRQ(EXT_IRQ16L(3), PORT224_FN0), - PINMUX_IRQ(EXT_IRQ16L(5), PORT227_FN0), - PINMUX_IRQ(EXT_IRQ16H(17), PORT234_FN0), - PINMUX_IRQ(EXT_IRQ16L(11), PORT238_FN0), - PINMUX_IRQ(EXT_IRQ16L(13), PORT239_FN0), - PINMUX_IRQ(EXT_IRQ16H(16), PORT249_FN0), - PINMUX_IRQ(EXT_IRQ16L(14), PORT251_FN0), - PINMUX_IRQ(EXT_IRQ16L(9), PORT308_FN0), -}; - -static struct pinmux_info sh73a0_pinmux_info = { - .name = "sh73a0_pfc", - .reserved_id = PINMUX_RESERVED, - .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, - .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, - .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, - .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, - .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, - - .first_gpio = GPIO_PORT0, - .last_gpio = GPIO_FN_FSIAISLD_PU, - - .gpios = pinmux_gpios, - .cfg_regs = pinmux_config_regs, - .data_regs = pinmux_data_regs, - - .gpio_data = pinmux_data, - .gpio_data_size = ARRAY_SIZE(pinmux_data), - - .gpio_irq = pinmux_irqs, - .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), -}; - -void sh73a0_pinmux_init(void) -{ - register_pinmux(&sh73a0_pinmux_info); -} diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index ed8d235..1f958d7 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -12,7 +12,6 @@ */ #include <linux/init.h> #include <linux/smp.h> -#include <asm/hardware/gic.h> void __init shmobile_smp_init_cpus(unsigned int ncores) { @@ -26,6 +25,4 @@ void __init shmobile_smp_init_cpus(unsigned int ncores) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c index 21e5316d..40b87aa 100644 --- a/arch/arm/mach-shmobile/pm-r8a7740.c +++ b/arch/arm/mach-shmobile/pm-r8a7740.c @@ -9,7 +9,9 @@ * for more details. */ #include <linux/console.h> +#include <linux/suspend.h> #include <mach/pm-rmobile.h> +#include <mach/common.h> #ifdef CONFIG_PM static int r8a7740_pd_a4s_suspend(void) @@ -58,3 +60,23 @@ void __init r8a7740_init_pm_domains(void) } #endif /* CONFIG_PM */ + +#ifdef CONFIG_SUSPEND +static int r8a7740_enter_suspend(suspend_state_t suspend_state) +{ + cpu_do_idle(); + return 0; +} + +static void r8a7740_suspend_init(void) +{ + shmobile_suspend_ops.enter = r8a7740_enter_suspend; +} +#else +static void r8a7740_suspend_init(void) {} +#endif + +void __init r8a7740_pm_init(void) +{ + r8a7740_suspend_init(); +} diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c new file mode 100644 index 0000000..99086e9 --- /dev/null +++ b/arch/arm/mach-shmobile/pm-sh73a0.c @@ -0,0 +1,32 @@ +/* + * sh73a0 Power management support + * + * Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/suspend.h> +#include <mach/common.h> + +#ifdef CONFIG_SUSPEND +static int sh73a0_enter_suspend(suspend_state_t suspend_state) +{ + cpu_do_idle(); + return 0; +} + +static void sh73a0_suspend_init(void) +{ + shmobile_suspend_ops.enter = sh73a0_enter_suspend; +} +#else +static void sh73a0_suspend_init(void) {} +#endif + +void __init sh73a0_pm_init(void) +{ + sh73a0_suspend_init(); +} diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index a47beeb..47662a5 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -20,13 +20,14 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip.h> #include <linux/platform_device.h> #include <linux/platform_data/gpio-em.h> #include <linux/of_platform.h> #include <linux/delay.h> #include <linux/input.h> #include <linux/io.h> -#include <linux/of_irq.h> +#include <linux/irqchip/arm-gic.h> #include <mach/hardware.h> #include <mach/common.h> #include <mach/emev2.h> @@ -35,7 +36,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <asm/hardware/gic.h> static struct map_desc emev2_io_desc[] __initdata = { #ifdef CONFIG_SMP @@ -445,29 +445,18 @@ void __init emev2_add_standard_devices_dt(void) emev2_auxdata_lookup, NULL); } -static const struct of_device_id emev2_dt_irq_match[] = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - {}, -}; - static const char *emev2_boards_compat_dt[] __initdata = { "renesas,emev2", NULL, }; -void __init emev2_init_irq_dt(void) -{ - of_irq_init(emev2_dt_irq_match); -} - DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .init_early = emev2_init_delay, .nr_irqs = NR_IRQS_LEGACY, - .init_irq = emev2_init_irq_dt, - .handle_irq = gic_handle_irq, + .init_irq = irqchip_init, .init_machine = emev2_add_standard_devices_dt, - .timer = &shmobile_timer, + .init_time = shmobile_timer_init, .dt_compat = emev2_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index b85bea5..8b85d4d 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -27,7 +27,6 @@ #include <linux/serial_sci.h> #include <linux/sh_dma.h> #include <linux/sh_timer.h> -#include <linux/dma-mapping.h> #include <linux/platform_data/sh_ipmmu.h> #include <mach/dma-register.h> #include <mach/r8a7740.h> @@ -69,6 +68,32 @@ void __init r8a7740_map_io(void) iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc)); } +/* PFC */ +static struct resource r8a7740_pfc_resources[] = { + [0] = { + .start = 0xe6050000, + .end = 0xe6057fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0xe605800c, + .end = 0xe605802b, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device r8a7740_pfc_device = { + .name = "pfc-r8a7740", + .id = -1, + .resource = r8a7740_pfc_resources, + .num_resources = ARRAY_SIZE(r8a7740_pfc_resources), +}; + +void __init r8a7740_pinmux_init(void) +{ + platform_device_register(&r8a7740_pfc_device); +} + /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xe6c40000, @@ -263,6 +288,97 @@ static struct platform_device cmt10_device = { .num_resources = ARRAY_SIZE(cmt10_resources), }; +/* TMU */ +static struct sh_timer_config tmu00_platform_data = { + .name = "TMU00", + .channel_offset = 0x4, + .timer_bit = 0, + .clockevent_rating = 200, +}; + +static struct resource tmu00_resources[] = { + [0] = { + .name = "TMU00", + .start = 0xfff80008, + .end = 0xfff80014 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0xe80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu00_device = { + .name = "sh_tmu", + .id = 0, + .dev = { + .platform_data = &tmu00_platform_data, + }, + .resource = tmu00_resources, + .num_resources = ARRAY_SIZE(tmu00_resources), +}; + +static struct sh_timer_config tmu01_platform_data = { + .name = "TMU01", + .channel_offset = 0x10, + .timer_bit = 1, + .clocksource_rating = 200, +}; + +static struct resource tmu01_resources[] = { + [0] = { + .name = "TMU01", + .start = 0xfff80014, + .end = 0xfff80020 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0xea0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu01_device = { + .name = "sh_tmu", + .id = 1, + .dev = { + .platform_data = &tmu01_platform_data, + }, + .resource = tmu01_resources, + .num_resources = ARRAY_SIZE(tmu01_resources), +}; + +static struct sh_timer_config tmu02_platform_data = { + .name = "TMU02", + .channel_offset = 0x1C, + .timer_bit = 2, + .clocksource_rating = 200, +}; + +static struct resource tmu02_resources[] = { + [0] = { + .name = "TMU02", + .start = 0xfff80020, + .end = 0xfff8002C - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0xec0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device tmu02_device = { + .name = "sh_tmu", + .id = 2, + .dev = { + .platform_data = &tmu02_platform_data, + }, + .resource = tmu02_resources, + .num_resources = ARRAY_SIZE(tmu02_resources), +}; + /* IPMMUI (an IPMMU module for ICB/LMB) */ static struct resource ipmmu_resources[] = { [0] = { @@ -305,6 +421,9 @@ static struct platform_device *r8a7740_early_devices[] __initdata = { &scif7_device, &scifb_device, &cmt10_device, + &tmu00_device, + &tmu01_device, + &tmu02_device, &ipmmu_device, }; @@ -738,12 +857,6 @@ void __init r8a7740_add_standard_devices(void) rmobile_add_device_to_domain("A3SP", &i2c1_device); } -static void __init r8a7740_earlytimer_init(void) -{ - r8a7740_clock_init(0); - shmobile_earlytimer_init(); -} - void __init r8a7740_add_early_devices(void) { early_platform_add_devices(r8a7740_early_devices, @@ -751,9 +864,6 @@ void __init r8a7740_add_early_devices(void) /* setup early console here as well */ shmobile_setup_console(); - - /* override timer setup with soc-specific code */ - shmobile_timer.init = r8a7740_earlytimer_init; } #ifdef CONFIG_USE_OF @@ -796,7 +906,7 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .init_irq = r8a7740_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = r8a7740_add_standard_devices_dt, - .timer = &shmobile_timer, + .init_time = shmobile_timer_init, .dt_compat = r8a7740_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 7a1ad4f..c54ff9b 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -60,14 +60,38 @@ void __init r8a7779_map_io(void) iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc)); } +static struct resource r8a7779_pfc_resources[] = { + [0] = { + .start = 0xfffc0000, + .end = 0xfffc023b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0xffc40000, + .end = 0xffc46fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device r8a7779_pfc_device = { + .name = "pfc-r8a7779", + .id = -1, + .resource = r8a7779_pfc_resources, + .num_resources = ARRAY_SIZE(r8a7779_pfc_resources), +}; + +void __init r8a7779_pinmux_init(void) +{ + platform_device_register(&r8a7779_pfc_device); +} + static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe40000, .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = { gic_spi(88), gic_spi(88), - gic_spi(88), gic_spi(88) }, + .irqs = SCIx_IRQ_MUXED(gic_spi(88)), }; static struct platform_device scif0_device = { @@ -84,8 +108,7 @@ static struct plat_sci_port scif1_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = { gic_spi(89), gic_spi(89), - gic_spi(89), gic_spi(89) }, + .irqs = SCIx_IRQ_MUXED(gic_spi(89)), }; static struct platform_device scif1_device = { @@ -102,8 +125,7 @@ static struct plat_sci_port scif2_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = { gic_spi(90), gic_spi(90), - gic_spi(90), gic_spi(90) }, + .irqs = SCIx_IRQ_MUXED(gic_spi(90)), }; static struct platform_device scif2_device = { @@ -120,8 +142,7 @@ static struct plat_sci_port scif3_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = { gic_spi(91), gic_spi(91), - gic_spi(91), gic_spi(91) }, + .irqs = SCIx_IRQ_MUXED(gic_spi(91)), }; static struct platform_device scif3_device = { @@ -138,8 +159,7 @@ static struct plat_sci_port scif4_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = { gic_spi(92), gic_spi(92), - gic_spi(92), gic_spi(92) }, + .irqs = SCIx_IRQ_MUXED(gic_spi(92)), }; static struct platform_device scif4_device = { @@ -156,8 +176,7 @@ static struct plat_sci_port scif5_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, - .irqs = { gic_spi(93), gic_spi(93), - gic_spi(93), gic_spi(93) }, + .irqs = SCIx_IRQ_MUXED(gic_spi(93)), }; static struct platform_device scif5_device = { @@ -339,7 +358,7 @@ void __init r8a7779_add_standard_devices(void) /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ void __init __weak r8a7779_register_twd(void) { } -static void __init r8a7779_earlytimer_init(void) +void __init r8a7779_earlytimer_init(void) { r8a7779_clock_init(); shmobile_earlytimer_init(); @@ -366,7 +385,4 @@ void __init r8a7779_add_early_devices(void) * As a final step pass earlyprint=sh-sci.2,115200 on the kernel * command line in case of the marzen board. */ - - /* override timer setup with soc-specific code */ - shmobile_timer.init = r8a7779_earlytimer_init; } diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 04ad98e..59c7146 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -61,6 +61,32 @@ void __init sh7372_map_io(void) iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc)); } +/* PFC */ +static struct resource sh7372_pfc_resources[] = { + [0] = { + .start = 0xe6050000, + .end = 0xe6057fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0xe605800c, + .end = 0xe6058027, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device sh7372_pfc_device = { + .name = "pfc-sh7372", + .id = -1, + .resource = sh7372_pfc_resources, + .num_resources = ARRAY_SIZE(sh7372_pfc_resources), +}; + +void __init sh7372_pinmux_init(void) +{ + platform_device_register(&sh7372_pfc_device); +} + /* SCIFA0 */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xe6c40000, @@ -1093,7 +1119,7 @@ void __init sh7372_add_standard_devices(void) ARRAY_SIZE(domain_devices)); } -static void __init sh7372_earlytimer_init(void) +void __init sh7372_earlytimer_init(void) { sh7372_clock_init(); shmobile_earlytimer_init(); @@ -1106,9 +1132,6 @@ void __init sh7372_add_early_devices(void) /* setup early console here as well */ shmobile_setup_console(); - - /* override timer setup with soc-specific code */ - shmobile_timer.init = sh7372_earlytimer_init; } #ifdef CONFIG_USE_OF @@ -1152,7 +1175,7 @@ DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)") .init_irq = sh7372_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = sh7372_add_standard_devices_dt, - .timer = &shmobile_timer, + .init_time = shmobile_timer_init, .dt_compat = sh7372_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 36c2b2e..bdab575 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/delay.h> #include <linux/input.h> #include <linux/io.h> @@ -58,6 +59,31 @@ void __init sh73a0_map_io(void) iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc)); } +static struct resource sh73a0_pfc_resources[] = { + [0] = { + .start = 0xe6050000, + .end = 0xe6057fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0xe605801c, + .end = 0xe6058027, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device sh73a0_pfc_device = { + .name = "pfc-sh73a0", + .id = -1, + .resource = sh73a0_pfc_resources, + .num_resources = ARRAY_SIZE(sh73a0_pfc_resources), +}; + +void __init sh73a0_pinmux_init(void) +{ + platform_device_register(&sh73a0_pfc_device); +} + static struct plat_sci_port scif0_platform_data = { .mapbase = 0xe6c40000, .flags = UPF_BOOT_AUTOCONF, @@ -784,7 +810,7 @@ static struct platform_device ipmmu_device = { .num_resources = ARRAY_SIZE(ipmmu_resources), }; -static struct platform_device *sh73a0_early_devices[] __initdata = { +static struct platform_device *sh73a0_early_devices_dt[] __initdata = { &scif0_device, &scif1_device, &scif2_device, @@ -795,6 +821,9 @@ static struct platform_device *sh73a0_early_devices[] __initdata = { &scif7_device, &scif8_device, &cmt10_device, +}; + +static struct platform_device *sh73a0_early_devices[] __initdata = { &tmu00_device, &tmu01_device, &ipmmu_device, @@ -818,6 +847,8 @@ void __init sh73a0_add_standard_devices(void) /* Clear software reset bit on SY-DMAC module */ __raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2); + platform_add_devices(sh73a0_early_devices_dt, + ARRAY_SIZE(sh73a0_early_devices_dt)); platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); platform_add_devices(sh73a0_late_devices, @@ -827,7 +858,7 @@ void __init sh73a0_add_standard_devices(void) /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */ void __init __weak sh73a0_register_twd(void) { } -static void __init sh73a0_earlytimer_init(void) +void __init sh73a0_earlytimer_init(void) { sh73a0_clock_init(); shmobile_earlytimer_init(); @@ -836,12 +867,63 @@ static void __init sh73a0_earlytimer_init(void) void __init sh73a0_add_early_devices(void) { + early_platform_add_devices(sh73a0_early_devices_dt, + ARRAY_SIZE(sh73a0_early_devices_dt)); early_platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); /* setup early console here as well */ shmobile_setup_console(); +} + +#ifdef CONFIG_USE_OF + +/* Please note that the clock initialisation shcheme used in + * sh73a0_add_early_devices_dt() and sh73a0_add_standard_devices_dt() + * does not work with SMP as there is a yet to be resolved lock-up in + * workqueue initialisation. + * + * CONFIG_SMP should be disabled when using this code. + */ + +void __init sh73a0_add_early_devices_dt(void) +{ + shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */ + + early_platform_add_devices(sh73a0_early_devices_dt, + ARRAY_SIZE(sh73a0_early_devices_dt)); + + /* setup early console here as well */ + shmobile_setup_console(); +} + +static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = { + {}, +}; - /* override timer setup with soc-specific code */ - shmobile_timer.init = sh73a0_earlytimer_init; +void __init sh73a0_add_standard_devices_dt(void) +{ + /* clocks are setup late during boot in the case of DT */ + sh73a0_clock_init(); + + platform_add_devices(sh73a0_early_devices_dt, + ARRAY_SIZE(sh73a0_early_devices_dt)); + of_platform_populate(NULL, of_default_bus_match_table, + sh73a0_auxdata_lookup, NULL); } + +static const char *sh73a0_boards_compat_dt[] __initdata = { + "renesas,sh73a0", + NULL, +}; + +DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)") + .map_io = sh73a0_map_io, + .init_early = sh73a0_add_early_devices_dt, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = sh73a0_init_irq_dt, + .init_machine = sh73a0_add_standard_devices_dt, + .init_time = shmobile_timer_init, + .dt_compat = sh73a0_boards_compat_dt, +MACHINE_END +#endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S index 1d56467..a9df53b 100644 --- a/arch/arm/mach-shmobile/sleep-sh7372.S +++ b/arch/arm/mach-shmobile/sleep-sh7372.S @@ -59,17 +59,19 @@ sh7372_do_idle_sysc: mcr p15, 0, r0, c1, c0, 0 isb + /* + * Clean and invalidate data cache again. + */ + ldr r1, kernel_flush + blx r1 + /* disable L2 cache in the aux control register */ mrc p15, 0, r10, c1, c0, 1 bic r10, r10, #2 mcr p15, 0, r10, c1, c0, 1 + isb /* - * Invalidate data cache again. - */ - ldr r1, kernel_flush - blx r1 - /* * The kernel doesn't interwork: v7_flush_dcache_all in particluar will * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled. * This sequence switches back to ARM. Note that .align may insert a diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index f674562..953eb1f 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -23,11 +23,11 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/emev2.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> -#include <asm/hardware/gic.h> #include <asm/cacheflush.h> #define EMEV2_SCU_BASE 0x1e000000 @@ -100,7 +100,7 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct * /* Tell ROM loader about our vector (in headsmp.S) */ emev2_set_boot_vector(__pa(shmobile_secondary_vector)); - gic_raise_softirq(cpumask_of(cpu), 0); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); return 0; } diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 2ce6af9..3a4acf2 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -23,12 +23,12 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/r8a7779.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> -#include <asm/hardware/gic.h> #define AVECR IOMEM(0xfe700040) diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index 624f00f..acb46a9 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -23,12 +23,13 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/irqchip/arm-gic.h> #include <mach/common.h> +#include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <mach/sh73a0.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> -#include <asm/hardware/gic.h> #define WUPCR IOMEM(0xe6151010) #define SRESCR IOMEM(0xe6151018) @@ -36,14 +37,13 @@ #define SBAR IOMEM(0xe6180020) #define APARMBAREA IOMEM(0xe6f10020) +#define PSTR_SHUTDOWN_MODE 3 + static void __iomem *scu_base_addr(void) { return (void __iomem *)0xf0000000; } -static DEFINE_SPINLOCK(scu_lock); -static unsigned long tmp; - #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29); void __init sh73a0_register_twd(void) @@ -52,20 +52,6 @@ void __init sh73a0_register_twd(void) } #endif -static void modify_scu_cpu_psr(unsigned long set, unsigned long clr) -{ - void __iomem *scu_base = scu_base_addr(); - - spin_lock(&scu_lock); - tmp = __raw_readl(scu_base + 8); - tmp &= ~clr; - tmp |= set; - spin_unlock(&scu_lock); - - /* disable cache coherency after releasing the lock */ - __raw_writel(tmp, scu_base + 8); -} - static unsigned int __init sh73a0_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); @@ -82,9 +68,6 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct { cpu = cpu_logical_map(cpu); - /* enable cache coherency */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); - if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3) __raw_writel(1 << cpu, WUPCR); /* wake up */ else @@ -95,16 +78,14 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) { - int cpu = cpu_logical_map(0); - scu_enable(scu_base_addr()); - /* Map the reset vector (in headsmp.S) */ + /* Map the reset vector (in headsmp-sh73a0.S) */ __raw_writel(0, APARMBAREA); /* 4k */ - __raw_writel(__pa(shmobile_secondary_vector), SBAR); + __raw_writel(__pa(sh73a0_secondary_vector), SBAR); - /* enable cache coherency on CPU0 */ - modify_scu_cpu_psr(0, 3 << (cpu * 8)); + /* enable cache coherency on booting CPU */ + scu_power_mode(scu_base_addr(), SCU_PM_NORMAL); } static void __init sh73a0_smp_init_cpus(void) @@ -114,16 +95,20 @@ static void __init sh73a0_smp_init_cpus(void) shmobile_smp_init_cpus(ncores); } -static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu) +#ifdef CONFIG_HOTPLUG_CPU +static int sh73a0_cpu_kill(unsigned int cpu) { + int k; + u32 pstr; - /* this function is running on another CPU than the offline target, - * here we need wait for shutdown code in platform_cpu_die() to - * finish before asking SoC-specific code to power off the CPU core. + /* + * wait until the power status register confirms the shutdown of the + * offline target */ for (k = 0; k < 1000; k++) { - if (shmobile_cpu_is_dead(cpu)) + pstr = (__raw_readl(PSTR) >> (4 * cpu)) & 3; + if (pstr == PSTR_SHUTDOWN_MODE) return 1; mdelay(1); @@ -132,6 +117,23 @@ static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu) return 0; } +static void sh73a0_cpu_die(unsigned int cpu) +{ + /* + * The ARM MPcore does not issue a cache coherency request for the L1 + * cache when powering off single CPUs. We must take care of this and + * further caches. + */ + dsb(); + flush_cache_all(); + + /* Set power off mode. This takes the CPU out of the MP cluster */ + scu_power_mode(scu_base_addr(), SCU_PM_POWEROFF); + + /* Enter shutdown mode */ + cpu_do_idle(); +} +#endif /* CONFIG_HOTPLUG_CPU */ struct smp_operations sh73a0_smp_ops __initdata = { .smp_init_cpus = sh73a0_smp_init_cpus, @@ -140,7 +142,7 @@ struct smp_operations sh73a0_smp_ops __initdata = { .smp_boot_secondary = sh73a0_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = sh73a0_cpu_kill, - .cpu_die = shmobile_cpu_die, - .cpu_disable = shmobile_cpu_disable, + .cpu_die = sh73a0_cpu_die, + .cpu_disable = shmobile_cpu_disable_any, #endif }; diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index a689197..3d16d4d 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -20,6 +20,7 @@ */ #include <linux/platform_device.h> #include <linux/delay.h> +#include <asm/arch_timer.h> #include <asm/mach/time.h> #include <asm/smp_twd.h> @@ -60,10 +61,8 @@ void __init shmobile_earlytimer_init(void) late_time_init = shmobile_late_time_init; } -static void __init shmobile_timer_init(void) +void __init shmobile_timer_init(void) { + arch_timer_of_register(); + arch_timer_sched_clock_init(); } - -struct sys_timer shmobile_timer = { - .init = shmobile_timer_init, -}; diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 9941caa..315edff 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -20,7 +20,7 @@ #ifndef __MACH_CORE_H #define __MACH_CORE_H -extern void secondary_startup(void); +extern void socfpga_secondary_startup(void); extern void __iomem *socfpga_scu_base_addr; extern void socfpga_init_clocks(void); @@ -29,6 +29,8 @@ extern void socfpga_sysmgr_init(void); extern struct smp_operations socfpga_smp_ops; extern char secondary_trampoline, secondary_trampoline_end; +extern unsigned long cpu1start_addr; + #define SOCFPGA_SCU_VIRT_BASE 0xfffec000 #endif diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index f09b128..9004bfb 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S @@ -13,13 +13,21 @@ __CPUINIT .arch armv7-a -#define CPU1_START_ADDR 0xffd08010 - ENTRY(secondary_trampoline) - movw r0, #:lower16:CPU1_START_ADDR - movt r0, #:upper16:CPU1_START_ADDR + movw r2, #:lower16:cpu1start_addr + movt r2, #:upper16:cpu1start_addr + + /* The socfpga VT cannot handle a 0xC0000000 page offset when loading + the cpu1start_addr, we bit clear it. Tested on HW and VT. */ + bic r2, r2, #0x40000000 + ldr r0, [r2] ldr r1, [r0] bx r1 ENTRY(secondary_trampoline_end) + +ENTRY(socfpga_secondary_startup) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(socfpga_secondary_startup) diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 68dd1b6..84c60fa 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -22,9 +22,9 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> -#include <asm/hardware/gic.h> #include <asm/smp_scu.h> #include <asm/smp_plat.h> @@ -47,16 +47,19 @@ static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; - memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); + if (cpu1start_addr) { + memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); - __raw_writel(virt_to_phys(secondary_startup), (sys_manager_base_addr+0x10)); + __raw_writel(virt_to_phys(socfpga_secondary_startup), + (sys_manager_base_addr + (cpu1start_addr & 0x000000ff))); - flush_cache_all(); - smp_wmb(); - outer_clean_range(0, trampoline_size); + flush_cache_all(); + smp_wmb(); + outer_clean_range(0, trampoline_size); - /* This will release CPU #1 out of reset.*/ - __raw_writel(0, rst_manager_base_addr + 0x10); + /* This will release CPU #1 out of reset.*/ + __raw_writel(0, rst_manager_base_addr + 0x10); + } return 0; } @@ -83,8 +86,6 @@ static void __init socfpga_smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 6732924..1042c02 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -15,12 +15,12 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/dw_apb_timer.h> +#include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/hardware/cache-l2x0.h> -#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -29,6 +29,7 @@ void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE)); void __iomem *sys_manager_base_addr; void __iomem *rst_manager_base_addr; +unsigned long cpu1start_addr; static struct map_desc scu_io_desc __initdata = { .virtual = SOCFPGA_SCU_VIRT_BASE, @@ -62,25 +63,25 @@ static void __init socfpga_map_io(void) early_printk("Early printk initialized\n"); } -const static struct of_device_id irq_match[] = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - {} -}; - void __init socfpga_sysmgr_init(void) { struct device_node *np; np = of_find_compatible_node(NULL, NULL, "altr,sys-mgr"); + + if (of_property_read_u32(np, "cpu1-start-addr", + (u32 *) &cpu1start_addr)) + pr_err("SMP: Need cpu1-start-addr in device tree.\n"); + sys_manager_base_addr = of_iomap(np, 0); np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr"); rst_manager_base_addr = of_iomap(np, 0); } -static void __init gic_init_irq(void) +static void __init socfpga_init_irq(void) { - of_irq_init(irq_match); + irqchip_init(); socfpga_sysmgr_init(); } @@ -98,16 +99,14 @@ static void __init socfpga_cyclone5_init(void) static const char *altera_dt_match[] = { "altr,socfpga", - "altr,socfpga-cyclone5", NULL }; DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA") .smp = smp_ops(socfpga_smp_ops), .map_io = socfpga_map_io, - .init_irq = gic_init_irq, - .handle_irq = gic_handle_irq, - .timer = &dw_apb_timer, + .init_irq = socfpga_init_irq, + .init_time = dw_apb_timer_init, .init_machine = socfpga_cyclone5_init, .restart = socfpga_cyclone5_restart, .dt_compat = altera_dt_match, diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h index c33f4d9..633e678 100644 --- a/arch/arm/mach-spear13xx/include/mach/generic.h +++ b/arch/arm/mach-spear13xx/include/mach/generic.h @@ -18,7 +18,7 @@ #include <asm/mach/time.h> /* Add spear13xx structure declarations here */ -extern struct sys_timer spear13xx_timer; +extern void spear13xx_timer_init(void); extern struct pl022_ssp_controller pl022_plat_data; extern struct dw_dma_platform_data dmac_plat_data; extern struct dw_dma_slave cf_dma_priv; @@ -28,7 +28,6 @@ extern struct dw_dma_slave nand_write_dma_priv; /* Add spear13xx family function declarations here */ void __init spear_setup_of_timer(void); void __init spear13xx_map_io(void); -void __init spear13xx_dt_init_irq(void); void __init spear13xx_l2x0_init(void); bool dw_dma_filter(struct dma_chan *chan, void *slave); void spear_restart(char, const char *); diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c index 2eaa3fa..af4ade6 100644 --- a/arch/arm/mach-spear13xx/platsmp.c +++ b/arch/arm/mach-spear13xx/platsmp.c @@ -15,8 +15,8 @@ #include <linux/jiffies.h> #include <linux/io.h> #include <linux/smp.h> +#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> -#include <asm/hardware/gic.h> #include <asm/smp_scu.h> #include <mach/spear.h> #include <mach/generic.h> @@ -104,8 +104,6 @@ static void __init spear13xx_smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c index 02f4724..56214d1 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear13xx/spear1310.c @@ -14,9 +14,9 @@ #define pr_fmt(fmt) "SPEAr1310: " fmt #include <linux/amba/pl022.h> +#include <linux/irqchip.h> #include <linux/of_platform.h> #include <linux/pata_arasan_cf_data.h> -#include <asm/hardware/gic.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/generic.h> @@ -90,9 +90,8 @@ static void __init spear1310_map_io(void) DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree") .smp = smp_ops(spear13xx_smp_ops), .map_io = spear1310_map_io, - .init_irq = spear13xx_dt_init_irq, - .handle_irq = gic_handle_irq, - .timer = &spear13xx_timer, + .init_irq = irqchip_init, + .init_time = spear13xx_timer_init, .init_machine = spear1310_dt_init, .restart = spear_restart, .dt_compat = spear1310_dt_board_compat, diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c index 081014f..9a28beb 100644 --- a/arch/arm/mach-spear13xx/spear1340.c +++ b/arch/arm/mach-spear13xx/spear1340.c @@ -18,7 +18,7 @@ #include <linux/delay.h> #include <linux/dw_dmac.h> #include <linux/of_platform.h> -#include <asm/hardware/gic.h> +#include <linux/irqchip.h> #include <asm/mach/arch.h> #include <mach/dma.h> #include <mach/generic.h> @@ -184,9 +184,8 @@ static const char * const spear1340_dt_board_compat[] = { DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree") .smp = smp_ops(spear13xx_smp_ops), .map_io = spear13xx_map_io, - .init_irq = spear13xx_dt_init_irq, - .handle_irq = gic_handle_irq, - .timer = &spear13xx_timer, + .init_irq = irqchip_init, + .init_time = spear13xx_timer_init, .init_machine = spear1340_dt_init, .restart = spear_restart, .dt_compat = spear1340_dt_board_compat, diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index c4af775..c7d2b4a 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -17,9 +17,8 @@ #include <linux/clk.h> #include <linux/dw_dmac.h> #include <linux/err.h> -#include <linux/of_irq.h> +#include <linux/of.h> #include <asm/hardware/cache-l2x0.h> -#include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <asm/smp_twd.h> #include <mach/dma.h> @@ -153,7 +152,7 @@ static void __init spear13xx_clk_init(void) pr_err("%s: Unknown machine\n", __func__); } -static void __init spear13xx_timer_init(void) +void __init spear13xx_timer_init(void) { char pclk_name[] = "osc_24m_clk"; struct clk *gpt_clk, *pclk; @@ -182,17 +181,3 @@ static void __init spear13xx_timer_init(void) spear_setup_of_timer(); twd_local_timer_of_register(); } - -struct sys_timer spear13xx_timer = { - .init = spear13xx_timer_init, -}; - -static const struct of_device_id gic_of_match[] __initconst = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init }, - { /* Sentinel */ } -}; - -void __init spear13xx_dt_init_irq(void) -{ - of_irq_init(gic_of_match); -} diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index ce19113..df31079 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -22,7 +22,7 @@ #include <asm/mach/map.h> /* Add spear3xx family device structure declarations here */ -extern struct sys_timer spear3xx_timer; +extern void spear3xx_timer_init(void); extern struct pl022_ssp_controller pl022_plat_data; extern struct pl08x_platform_data pl080_plat_data; @@ -30,7 +30,6 @@ extern struct pl08x_platform_data pl080_plat_data; void __init spear_setup_of_timer(void); void __init spear3xx_clk_init(void); void __init spear3xx_map_io(void); -void __init spear3xx_dt_init_irq(void); void spear_restart(char, const char *); diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index a69cbfd..bbc9b7e 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -14,8 +14,8 @@ #define pr_fmt(fmt) "SPEAr300: " fmt #include <linux/amba/pl08x.h> +#include <linux/irqchip.h> #include <linux/of_platform.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <mach/generic.h> #include <mach/spear.h> @@ -212,9 +212,8 @@ static void __init spear300_map_io(void) DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree") .map_io = spear300_map_io, - .init_irq = spear3xx_dt_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, + .init_irq = irqchip_init, + .init_time = spear3xx_timer_init, .init_machine = spear300_dt_init, .restart = spear_restart, .dt_compat = spear300_dt_board_compat, diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index b963ebb..c13a434 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -15,8 +15,8 @@ #include <linux/amba/pl08x.h> #include <linux/amba/serial.h> +#include <linux/irqchip.h> #include <linux/of_platform.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <mach/generic.h> #include <mach/spear.h> @@ -254,9 +254,8 @@ static void __init spear310_map_io(void) DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree") .map_io = spear310_map_io, - .init_irq = spear3xx_dt_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, + .init_irq = irqchip_init, + .init_time = spear3xx_timer_init, .init_machine = spear310_dt_init, .restart = spear_restart, .dt_compat = spear310_dt_board_compat, diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 66e3a0c..e1c7707 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -16,8 +16,8 @@ #include <linux/amba/pl022.h> #include <linux/amba/pl08x.h> #include <linux/amba/serial.h> +#include <linux/irqchip.h> #include <linux/of_platform.h> -#include <asm/hardware/vic.h> #include <asm/mach/arch.h> #include <mach/generic.h> #include <mach/spear.h> @@ -268,9 +268,8 @@ static void __init spear320_map_io(void) DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree") .map_io = spear320_map_io, - .init_irq = spear3xx_dt_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, + .init_irq = irqchip_init, + .init_time = spear3xx_timer_init, .init_machine = spear320_dt_init, .restart = spear_restart, .dt_compat = spear320_dt_board_compat, diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 38fe95d..f9d754f 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -15,11 +15,7 @@ #include <linux/amba/pl022.h> #include <linux/amba/pl08x.h> -#include <linux/irqchip/spear-shirq.h> -#include <linux/of_irq.h> #include <linux/io.h> -#include <asm/hardware/pl080.h> -#include <asm/hardware/vic.h> #include <plat/pl080.h> #include <mach/generic.h> #include <mach/spear.h> @@ -87,7 +83,7 @@ void __init spear3xx_map_io(void) iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); } -static void __init spear3xx_timer_init(void) +void __init spear3xx_timer_init(void) { char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; @@ -115,20 +111,3 @@ static void __init spear3xx_timer_init(void) spear_setup_of_timer(); } - -struct sys_timer spear3xx_timer = { - .init = spear3xx_timer_init, -}; - -static const struct of_device_id vic_of_match[] __initconst = { - { .compatible = "arm,pl190-vic", .data = vic_of_init, }, - { .compatible = "st,spear300-shirq", .data = spear300_shirq_of_init, }, - { .compatible = "st,spear310-shirq", .data = spear310_shirq_of_init, }, - { .compatible = "st,spear320-shirq", .data = spear320_shirq_of_init, }, - { /* Sentinel */ } -}; - -void __init spear3xx_dt_init_irq(void) -{ - of_irq_init(vic_of_match); -} diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 5a5a52d..8904d8a 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -16,12 +16,11 @@ #include <linux/amba/pl08x.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/irqchip.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <asm/hardware/pl080.h> -#include <asm/hardware/vic.h> +#include <linux/amba/pl080.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> @@ -374,7 +373,7 @@ void __init spear6xx_map_io(void) iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc)); } -static void __init spear6xx_timer_init(void) +void __init spear6xx_timer_init(void) { char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; @@ -403,10 +402,6 @@ static void __init spear6xx_timer_init(void) spear_setup_of_timer(); } -struct sys_timer spear6xx_timer = { - .init = spear6xx_timer_init, -}; - /* Add auxdata to pass platform data */ struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL, @@ -425,21 +420,10 @@ static const char *spear600_dt_board_compat[] = { NULL }; -static const struct of_device_id vic_of_match[] __initconst = { - { .compatible = "arm,pl190-vic", .data = vic_of_init, }, - { /* Sentinel */ } -}; - -static void __init spear6xx_dt_init_irq(void) -{ - of_irq_init(vic_of_match); -} - DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)") .map_io = spear6xx_map_io, - .init_irq = spear6xx_dt_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear6xx_timer, + .init_irq = irqchip_init, + .init_time = spear6xx_timer_init, .init_machine = spear600_dt_init, .restart = spear_restart, .dt_compat = spear600_dt_board_compat, diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 3fdd008..8709a39 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -7,3 +7,4 @@ config ARCH_SUNXI select PINCTRL select SPARSE_IRQ select SUNXI_TIMER + select PINCTRL_SUNXI
\ No newline at end of file diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 1dc8a92..23afb73 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -21,15 +21,16 @@ #include <linux/irqchip/sunxi.h> -#include <asm/hardware/vic.h> - #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "sunxi.h" #define WATCHDOG_CTRL_REG 0x00 +#define WATCHDOG_CTRL_RESTART (1 << 0) #define WATCHDOG_MODE_REG 0x04 +#define WATCHDOG_MODE_ENABLE (1 << 0) +#define WATCHDOG_MODE_RESET_ENABLE (1 << 1) static void __iomem *wdt_base; @@ -50,11 +51,19 @@ static void sunxi_restart(char mode, const char *cmd) return; /* Enable timer and set reset bit in the watchdog */ - writel(3, wdt_base + WATCHDOG_MODE_REG); - writel(0xa57 << 1 | 1, wdt_base + WATCHDOG_CTRL_REG); - while(1) { + writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE, + wdt_base + WATCHDOG_MODE_REG); + + /* + * Restart the watchdog. The default (and lowest) interval + * value for the watchdog is 0.5s. + */ + writel(WATCHDOG_CTRL_RESTART, wdt_base + WATCHDOG_CTRL_REG); + + while (1) { mdelay(5); - writel(3, wdt_base + WATCHDOG_MODE_REG); + writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE, + wdt_base + WATCHDOG_MODE_REG); } } @@ -91,6 +100,6 @@ DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") .init_irq = sunxi_init_irq, .handle_irq = sunxi_handle_irq, .restart = sunxi_restart, - .timer = &sunxi_timer, + .init_time = &sunxi_timer_init, .dt_compat = sunxi_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index b442f15..d1c4893 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -4,11 +4,11 @@ comment "NVIDIA Tegra options" config ARCH_TEGRA_2x_SOC bool "Enable support for Tegra20 family" - select ARCH_REQUIRE_GPIOLIB + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP select ARM_ERRATA_720789 - select ARM_ERRATA_742230 + select ARM_ERRATA_742230 if SMP select ARM_ERRATA_751472 - select ARM_ERRATA_754327 + select ARM_ERRATA_754327 if SMP select ARM_ERRATA_764369 if SMP select ARM_GIC select CPU_FREQ_TABLE if CPU_FREQ @@ -26,7 +26,6 @@ config ARCH_TEGRA_2x_SOC config ARCH_TEGRA_3x_SOC bool "Enable support for Tegra30 family" - select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_743622 select ARM_ERRATA_751472 select ARM_ERRATA_754322 @@ -44,6 +43,18 @@ config ARCH_TEGRA_3x_SOC Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller +config ARCH_TEGRA_114_SOC + bool "Enable support for Tegra114 family" + select ARM_ARCH_TIMER + select ARM_GIC + select ARM_L1_CACHE_SHIFT_6 + select CPU_V7 + select PINCTRL + select PINCTRL_TEGRA114 + help + Support for NVIDIA Tegra T114 processor family, based on the + ARM CortexA15MP CPU + config TEGRA_PCI bool "PCI Express support" depends on ARCH_TEGRA_2x_SOC diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 0979e8b..f6b46ae 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -1,39 +1,38 @@ obj-y += common.o obj-y += io.o obj-y += irq.o -obj-y += clock.o -obj-y += timer.o obj-y += fuse.o obj-y += pmc.o obj-y += flowctrl.o obj-y += powergate.o obj-y += apbio.o obj-y += pm.o +obj-y += reset.o +obj-y += reset-handler.o +obj-y += sleep.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o -obj-$(CONFIG_CPU_IDLE) += sleep.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o endif -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o -obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks_data.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o endif obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_SMP) += reset.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o +obj-$(CONFIG_ARCH_TEGRA_114_SOC) += board-dt-tegra114.o +ifeq ($(CONFIG_CPU_IDLE),y) +obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o +endif obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-harmony-pcie.o diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c index d091675..d7aa52e 100644 --- a/arch/arm/mach-tegra/apbio.c +++ b/arch/arm/mach-tegra/apbio.c @@ -38,7 +38,7 @@ static void tegra_apb_writel_direct(u32 value, unsigned long offset); static struct dma_chan *tegra_apb_dma_chan; static struct dma_slave_config dma_sconfig; -bool tegra_apb_dma_init(void) +static bool tegra_apb_dma_init(void) { dma_cap_mask_t mask; diff --git a/arch/arm/mach-tegra/board-dt-tegra114.c b/arch/arm/mach-tegra/board-dt-tegra114.c new file mode 100644 index 0000000..085d636 --- /dev/null +++ b/arch/arm/mach-tegra/board-dt-tegra114.c @@ -0,0 +1,46 @@ +/* + * NVIDIA Tegra114 device tree board support + * + * Copyright (C) 2013 NVIDIA Corporation + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/clocksource.h> + +#include <asm/mach/arch.h> + +#include "board.h" +#include "common.h" + +static void __init tegra114_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const tegra114_dt_board_compat[] = { + "nvidia,tegra114", + NULL, +}; + +DT_MACHINE_START(TEGRA114_DT, "NVIDIA Tegra114 (Flattened Device Tree)") + .smp = smp_ops(tegra_smp_ops), + .map_io = tegra_map_common_io, + .init_early = tegra114_init_early, + .init_irq = tegra_dt_init_irq, + .init_time = clocksource_of_init, + .init_machine = tegra114_dt_init, + .init_late = tegra_init_late, + .restart = tegra_assert_system_reset, + .dt_compat = tegra114_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 734d9cc..a0edf25 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -15,6 +15,7 @@ * */ +#include <linux/clocksource.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -25,7 +26,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_fdt.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/pda_power.h> #include <linux/platform_data/tegra_usb.h> @@ -34,106 +34,51 @@ #include <linux/i2c-tegra.h> #include <linux/usb/tegra_usb_phy.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/setup.h> #include "board.h" -#include "clock.h" #include "common.h" #include "iomap.h" -struct tegra_ehci_platform_data tegra_ehci1_pdata = { +static struct tegra_ehci_platform_data tegra_ehci1_pdata = { .operating_mode = TEGRA_USB_OTG, .power_down_on_bus_suspend = 1, .vbus_gpio = -1, }; -struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = { +static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = { .reset_gpio = -1, .clk = "cdev2", }; -struct tegra_ehci_platform_data tegra_ehci2_pdata = { +static struct tegra_ehci_platform_data tegra_ehci2_pdata = { .phy_config = &tegra_ehci2_ulpi_phy_config, .operating_mode = TEGRA_USB_HOST, .power_down_on_bus_suspend = 1, .vbus_gpio = -1, }; -struct tegra_ehci_platform_data tegra_ehci3_pdata = { +static struct tegra_ehci_platform_data tegra_ehci3_pdata = { .operating_mode = TEGRA_USB_HOST, .power_down_on_bus_suspend = 1, .vbus_gpio = -1, }; -struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC4_BASE, "sdhci-tegra.3", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C_BASE, "tegra-i2c.0", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C2_BASE, "tegra-i2c.1", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C3_BASE, "tegra-i2c.2", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2c-dvc", TEGRA_DVC_BASE, "tegra-i2c.3", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra20-i2s.0", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S2_BASE, "tegra20-i2s.1", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra20-das", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB_BASE, "tegra-ehci.0", +static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5000000, "tegra-ehci.0", &tegra_ehci1_pdata), - OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB2_BASE, "tegra-ehci.1", + OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5004000, "tegra-ehci.1", &tegra_ehci2_pdata), - OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2", + OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5008000, "tegra-ehci.2", &tegra_ehci3_pdata), - OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-sflash", 0x7000c380, "spi", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D400, "spi_tegra.0", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D600, "spi_tegra.1", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D800, "spi_tegra.2", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000DA00, "spi_tegra.3", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-host1x", 0x50000000, "host1x", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54200000, "tegradc.0", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54240000, "tegradc.1", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-hdmi", 0x54280000, "hdmi", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-dsi", 0x54300000, "dsi", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-tvo", 0x542c0000, "tvo", NULL), {} }; -static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { - /* name parent rate enabled */ - { "uarta", "pll_p", 216000000, true }, - { "uartd", "pll_p", 216000000, true }, - { "usbd", "clk_m", 12000000, false }, - { "usb2", "clk_m", 12000000, false }, - { "usb3", "clk_m", 12000000, false }, - { "pll_a", "pll_p_out1", 56448000, true }, - { "pll_a_out0", "pll_a", 11289600, true }, - { "cdev1", NULL, 0, true }, - { "blink", "clk_32k", 32768, true }, - { "i2s1", "pll_a_out0", 11289600, false}, - { "i2s2", "pll_a_out0", 11289600, false}, - { "sdmmc1", "pll_p", 48000000, false}, - { "sdmmc3", "pll_p", 48000000, false}, - { "sdmmc4", "pll_p", 48000000, false}, - { "spi", "pll_p", 20000000, false }, - { "sbc1", "pll_p", 100000000, false }, - { "sbc2", "pll_p", 100000000, false }, - { "sbc3", "pll_p", 100000000, false }, - { "sbc4", "pll_p", 100000000, false }, - { "host1x", "pll_c", 150000000, false }, - { "disp1", "pll_p", 600000000, false }, - { "disp2", "pll_p", 600000000, false }, - { NULL, NULL, 0, 0}, -}; - static void __init tegra_dt_init(void) { - tegra_clk_init_from_table(tegra_dt_clk_init_table); - /* * Finished with the static registrations now; fill in the missing * devices @@ -202,8 +147,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") .smp = smp_ops(tegra_smp_ops), .init_early = tegra20_init_early, .init_irq = tegra_dt_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_sys_timer, + .init_time = clocksource_of_init, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index 6497d12..bf68567 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -23,6 +23,7 @@ * */ +#include <linux/clocksource.h> #include <linux/kernel.h> #include <linux/of.h> #include <linux/of_address.h> @@ -31,75 +32,14 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include "board.h" -#include "clock.h" #include "common.h" #include "iomap.h" -struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000400, "sdhci-tegra.2", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000600, "sdhci-tegra.3", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C000, "tegra-i2c.0", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C400, "tegra-i2c.1", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL), - OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D400, "spi_tegra.0", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D600, "spi_tegra.1", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D800, "spi_tegra.2", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DA00, "spi_tegra.3", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DC00, "spi_tegra.4", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DE00, "spi_tegra.5", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-host1x", 0x50000000, "host1x", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54200000, "tegradc.0", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54240000, "tegradc.1", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-hdmi", 0x54280000, "hdmi", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-dsi", 0x54300000, "dsi", NULL), - OF_DEV_AUXDATA("nvidia,tegra30-tvo", 0x542c0000, "tvo", NULL), - {} -}; - -static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { - /* name parent rate enabled */ - { "uarta", "pll_p", 408000000, true }, - { "pll_a", "pll_p_out1", 564480000, true }, - { "pll_a_out0", "pll_a", 11289600, true }, - { "extern1", "pll_a_out0", 0, true }, - { "clk_out_1", "extern1", 0, true }, - { "blink", "clk_32k", 32768, true }, - { "i2s0", "pll_a_out0", 11289600, false}, - { "i2s1", "pll_a_out0", 11289600, false}, - { "i2s2", "pll_a_out0", 11289600, false}, - { "i2s3", "pll_a_out0", 11289600, false}, - { "i2s4", "pll_a_out0", 11289600, false}, - { "sdmmc1", "pll_p", 48000000, false}, - { "sdmmc3", "pll_p", 48000000, false}, - { "sdmmc4", "pll_p", 48000000, false}, - { "sbc1", "pll_p", 100000000, false}, - { "sbc2", "pll_p", 100000000, false}, - { "sbc3", "pll_p", 100000000, false}, - { "sbc4", "pll_p", 100000000, false}, - { "sbc5", "pll_p", 100000000, false}, - { "sbc6", "pll_p", 100000000, false}, - { "host1x", "pll_c", 150000000, false}, - { "disp1", "pll_p", 600000000, false}, - { "disp2", "pll_p", 600000000, false}, - { NULL, NULL, 0, 0}, -}; - static void __init tegra30_dt_init(void) { - tegra_clk_init_from_table(tegra_dt_clk_init_table); - - of_platform_populate(NULL, of_default_bus_match_table, - tegra30_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *tegra30_dt_board_compat[] = { @@ -112,8 +52,7 @@ DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)") .map_io = tegra_map_common_io, .init_early = tegra30_init_early, .init_irq = tegra_dt_init_irq, - .handle_irq = gic_handle_irq, - .timer = &tegra_sys_timer, + .init_time = clocksource_of_init, .init_machine = tegra30_dt_init, .init_late = tegra_init_late, .restart = tegra_assert_system_reset, diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 91fbe73..86851c8 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -1,6 +1,7 @@ /* * arch/arm/mach-tegra/board.h * + * Copyright (c) 2013 NVIDIA Corporation. All rights reserved. * Copyright (C) 2010 Google, Inc. * * Author: @@ -27,6 +28,7 @@ void tegra_assert_system_reset(char mode, const char *cmd); void __init tegra20_init_early(void); void __init tegra30_init_early(void); +void __init tegra114_init_early(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); void __init tegra_dt_init_irq(void); @@ -55,5 +57,4 @@ static inline int harmony_pcie_init(void) { return 0; } void __init tegra_paz00_wifikill_init(void); -extern struct sys_timer tegra_sys_timer; #endif diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c deleted file mode 100644 index 867bf8b..0000000 --- a/arch/arm/mach-tegra/clock.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * - * Copyright (C) 2010 Google, Inc. - * Copyright (c) 2012 NVIDIA CORPORATION. All rights reserved. - * - * Author: - * Colin Cross <ccross@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/seq_file.h> -#include <linux/slab.h> - -#include "board.h" -#include "clock.h" -#include "tegra_cpu_car.h" - -/* Global data of Tegra CPU CAR ops */ -struct tegra_cpu_car_ops *tegra_cpu_car_ops; - -/* - * Locking: - * - * An additional mutex, clock_list_lock, is used to protect the list of all - * clocks. - * - */ -static DEFINE_MUTEX(clock_list_lock); -static LIST_HEAD(clocks); - -void tegra_clk_add(struct clk *clk) -{ - struct clk_tegra *c = to_clk_tegra(__clk_get_hw(clk)); - - mutex_lock(&clock_list_lock); - list_add(&c->node, &clocks); - mutex_unlock(&clock_list_lock); -} - -struct clk *tegra_get_clock_by_name(const char *name) -{ - struct clk_tegra *c; - struct clk *ret = NULL; - mutex_lock(&clock_list_lock); - list_for_each_entry(c, &clocks, node) { - if (strcmp(__clk_get_name(c->hw.clk), name) == 0) { - ret = c->hw.clk; - break; - } - } - mutex_unlock(&clock_list_lock); - return ret; -} - -static int tegra_clk_init_one_from_table(struct tegra_clk_init_table *table) -{ - struct clk *c; - struct clk *p; - struct clk *parent; - - int ret = 0; - - c = tegra_get_clock_by_name(table->name); - - if (!c) { - pr_warn("Unable to initialize clock %s\n", - table->name); - return -ENODEV; - } - - parent = clk_get_parent(c); - - if (table->parent) { - p = tegra_get_clock_by_name(table->parent); - if (!p) { - pr_warn("Unable to find parent %s of clock %s\n", - table->parent, table->name); - return -ENODEV; - } - - if (parent != p) { - ret = clk_set_parent(c, p); - if (ret) { - pr_warn("Unable to set parent %s of clock %s: %d\n", - table->parent, table->name, ret); - return -EINVAL; - } - } - } - - if (table->rate && table->rate != clk_get_rate(c)) { - ret = clk_set_rate(c, table->rate); - if (ret) { - pr_warn("Unable to set clock %s to rate %lu: %d\n", - table->name, table->rate, ret); - return -EINVAL; - } - } - - if (table->enabled) { - ret = clk_prepare_enable(c); - if (ret) { - pr_warn("Unable to enable clock %s: %d\n", - table->name, ret); - return -EINVAL; - } - } - - return 0; -} - -void tegra_clk_init_from_table(struct tegra_clk_init_table *table) -{ - for (; table->name; table++) - tegra_clk_init_one_from_table(table); -} - -void tegra_periph_reset_deassert(struct clk *c) -{ - struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c)); - BUG_ON(!clk->reset); - clk->reset(__clk_get_hw(c), false); -} -EXPORT_SYMBOL(tegra_periph_reset_deassert); - -void tegra_periph_reset_assert(struct clk *c) -{ - struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c)); - BUG_ON(!clk->reset); - clk->reset(__clk_get_hw(c), true); -} -EXPORT_SYMBOL(tegra_periph_reset_assert); - -/* Several extended clock configuration bits (e.g., clock routing, clock - * phase control) are included in PLL and peripheral clock source - * registers. */ -int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting) -{ - int ret = 0; - struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c)); - - if (!clk->clk_cfg_ex) { - ret = -ENOSYS; - goto out; - } - ret = clk->clk_cfg_ex(__clk_get_hw(c), p, setting); - -out: - return ret; -} diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h deleted file mode 100644 index 2aa37f5..0000000 --- a/arch/arm/mach-tegra/clock.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/clock.h - * - * Copyright (C) 2010 Google, Inc. - * Copyright (c) 2012 NVIDIA CORPORATION. All rights reserved. - * - * Author: - * Colin Cross <ccross@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_TEGRA_CLOCK_H -#define __MACH_TEGRA_CLOCK_H - -#include <linux/clk-provider.h> -#include <linux/clkdev.h> -#include <linux/list.h> - -#include <mach/clk.h> - -#define DIV_BUS (1 << 0) -#define DIV_U71 (1 << 1) -#define DIV_U71_FIXED (1 << 2) -#define DIV_2 (1 << 3) -#define DIV_U16 (1 << 4) -#define PLL_FIXED (1 << 5) -#define PLL_HAS_CPCON (1 << 6) -#define MUX (1 << 7) -#define PLLD (1 << 8) -#define PERIPH_NO_RESET (1 << 9) -#define PERIPH_NO_ENB (1 << 10) -#define PERIPH_EMC_ENB (1 << 11) -#define PERIPH_MANUAL_RESET (1 << 12) -#define PLL_ALT_MISC_REG (1 << 13) -#define PLLU (1 << 14) -#define PLLX (1 << 15) -#define MUX_PWM (1 << 16) -#define MUX8 (1 << 17) -#define DIV_U71_UART (1 << 18) -#define MUX_CLK_OUT (1 << 19) -#define PLLM (1 << 20) -#define DIV_U71_INT (1 << 21) -#define DIV_U71_IDLE (1 << 22) -#define ENABLE_ON_INIT (1 << 28) -#define PERIPH_ON_APB (1 << 29) - -struct clk_tegra; -#define to_clk_tegra(_hw) container_of(_hw, struct clk_tegra, hw) - -struct clk_mux_sel { - struct clk *input; - u32 value; -}; - -struct clk_pll_freq_table { - unsigned long input_rate; - unsigned long output_rate; - u16 n; - u16 m; - u8 p; - u8 cpcon; -}; - -enum clk_state { - UNINITIALIZED = 0, - ON, - OFF, -}; - -struct clk_tegra { - /* node for master clocks list */ - struct list_head node; /* node for list of all clocks */ - struct clk_lookup lookup; - struct clk_hw hw; - - bool set; - unsigned long fixed_rate; - unsigned long max_rate; - unsigned long min_rate; - u32 flags; - const char *name; - - enum clk_state state; - u32 div; - u32 mul; - - u32 reg; - u32 reg_shift; - - struct list_head shared_bus_list; - - union { - struct { - unsigned int clk_num; - } periph; - struct { - unsigned long input_min; - unsigned long input_max; - unsigned long cf_min; - unsigned long cf_max; - unsigned long vco_min; - unsigned long vco_max; - const struct clk_pll_freq_table *freq_table; - int lock_delay; - unsigned long fixed_rate; - } pll; - struct { - u32 sel; - u32 reg_mask; - } mux; - struct { - struct clk *main; - struct clk *backup; - } cpu; - struct { - struct list_head node; - bool enabled; - unsigned long rate; - } shared_bus_user; - } u; - - void (*reset)(struct clk_hw *, bool); - int (*clk_cfg_ex)(struct clk_hw *, enum tegra_clk_ex_param, u32); -}; - -struct clk_duplicate { - const char *name; - struct clk_lookup lookup; -}; - -struct tegra_clk_init_table { - const char *name; - const char *parent; - unsigned long rate; - bool enabled; -}; - -void tegra_clk_add(struct clk *c); -void tegra2_init_clocks(void); -void tegra30_init_clocks(void); -struct clk *tegra_get_clock_by_name(const char *name); -void tegra_clk_init_from_table(struct tegra_clk_init_table *table); - -#endif diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index d54cfc5..5449a3f 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -1,6 +1,7 @@ /* * arch/arm/mach-tegra/common.c * + * Copyright (c) 2013 NVIDIA Corporation. All rights reserved. * Copyright (C) 2010 Google, Inc. * * Author: @@ -21,15 +22,14 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/delay.h> -#include <linux/of_irq.h> +#include <linux/irqchip.h> +#include <linux/clk/tegra.h> #include <asm/hardware/cache-l2x0.h> -#include <asm/hardware/gic.h> #include <mach/powergate.h> #include "board.h" -#include "clock.h" #include "common.h" #include "fuse.h" #include "iomap.h" @@ -37,6 +37,7 @@ #include "apbio.h" #include "sleep.h" #include "pm.h" +#include "reset.h" /* * Storage for debug-macro.S's state. @@ -57,15 +58,11 @@ u32 tegra_uart_config[4] = { }; #ifdef CONFIG_OF -static const struct of_device_id tegra_dt_irq_match[] __initconst = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init }, - { } -}; - void __init tegra_dt_init_irq(void) { + tegra_clocks_init(); tegra_init_irq(); - of_irq_init(tegra_dt_irq_match); + irqchip_init(); } #endif @@ -79,43 +76,6 @@ void tegra_assert_system_reset(char mode, const char *cmd) writel_relaxed(reg, reset); } -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = { - /* name parent rate enabled */ - { "clk_m", NULL, 0, true }, - { "pll_p", "clk_m", 216000000, true }, - { "pll_p_out1", "pll_p", 28800000, true }, - { "pll_p_out2", "pll_p", 48000000, true }, - { "pll_p_out3", "pll_p", 72000000, true }, - { "pll_p_out4", "pll_p", 24000000, true }, - { "pll_c", "clk_m", 600000000, true }, - { "pll_c_out1", "pll_c", 120000000, true }, - { "sclk", "pll_c_out1", 120000000, true }, - { "hclk", "sclk", 120000000, true }, - { "pclk", "hclk", 60000000, true }, - { "csite", NULL, 0, true }, - { "emc", NULL, 0, true }, - { "cpu", NULL, 0, true }, - { NULL, NULL, 0, 0}, -}; -#endif - -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { - /* name parent rate enabled */ - { "clk_m", NULL, 0, true }, - { "pll_p", "pll_ref", 408000000, true }, - { "pll_p_out1", "pll_p", 9600000, true }, - { "pll_p_out4", "pll_p", 102000000, true }, - { "sclk", "pll_p_out4", 102000000, true }, - { "hclk", "sclk", 102000000, true }, - { "pclk", "hclk", 51000000, true }, - { "csite", NULL, 0, true }, - { NULL, NULL, 0, 0}, -}; -#endif - - static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 @@ -134,33 +94,39 @@ static void __init tegra_init_cache(void) } -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -void __init tegra20_init_early(void) +static void __init tegra_init_early(void) { + tegra_cpu_reset_handler_init(); tegra_apb_io_init(); tegra_init_fuse(); - tegra2_init_clocks(); - tegra_clk_init_from_table(tegra20_clk_init_table); tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); +} + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +void __init tegra20_init_early(void) +{ + tegra_init_early(); tegra20_hotplug_init(); } #endif + #ifdef CONFIG_ARCH_TEGRA_3x_SOC void __init tegra30_init_early(void) { - tegra_apb_io_init(); - tegra_init_fuse(); - tegra30_init_clocks(); - tegra_clk_init_from_table(tegra30_clk_init_table); - tegra_init_cache(); - tegra_pmc_init(); - tegra_powergate_init(); + tegra_init_early(); tegra30_hotplug_init(); } #endif +#ifdef CONFIG_ARCH_TEGRA_114_SOC +void __init tegra114_init_early(void) +{ + tegra_init_early(); +} +#endif + void __init tegra_init_late(void) { tegra_powergate_debugfs_init(); diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h index 02f71b4..32f8eb3 100644 --- a/arch/arm/mach-tegra/common.h +++ b/arch/arm/mach-tegra/common.h @@ -1,4 +1,5 @@ extern struct smp_operations tegra_smp_ops; +extern int tegra_cpu_kill(unsigned int cpu); extern void tegra_cpu_die(unsigned int cpu); extern int tegra_cpu_disable(unsigned int cpu); diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index a74d3c7..e3d6e15 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -214,24 +214,6 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) if (policy->cpu >= NUM_CPUS) return -EINVAL; - cpu_clk = clk_get_sys(NULL, "cpu"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - pll_x_clk = clk_get_sys(NULL, "pll_x"); - if (IS_ERR(pll_x_clk)) - return PTR_ERR(pll_x_clk); - - pll_p_clk = clk_get_sys(NULL, "pll_p"); - if (IS_ERR(pll_p_clk)) - return PTR_ERR(pll_p_clk); - - emc_clk = clk_get_sys("cpu", "emc"); - if (IS_ERR(emc_clk)) { - clk_put(cpu_clk); - return PTR_ERR(emc_clk); - } - clk_prepare_enable(emc_clk); clk_prepare_enable(cpu_clk); @@ -243,8 +225,7 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) /* FIXME: what's the actual transition time? */ policy->cpuinfo.transition_latency = 300 * 1000; - policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; - cpumask_copy(policy->related_cpus, cpu_possible_mask); + cpumask_copy(policy->cpus, cpu_possible_mask); if (policy->cpu == 0) register_pm_notifier(&tegra_cpu_pm_notifier); @@ -256,8 +237,6 @@ static int tegra_cpu_exit(struct cpufreq_policy *policy) { cpufreq_frequency_table_cpuinfo(policy, freq_table); clk_disable_unprepare(emc_clk); - clk_put(emc_clk); - clk_put(cpu_clk); return 0; } @@ -278,12 +257,32 @@ static struct cpufreq_driver tegra_cpufreq_driver = { static int __init tegra_cpufreq_init(void) { + cpu_clk = clk_get_sys(NULL, "cpu"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + pll_x_clk = clk_get_sys(NULL, "pll_x"); + if (IS_ERR(pll_x_clk)) + return PTR_ERR(pll_x_clk); + + pll_p_clk = clk_get_sys(NULL, "pll_p_cclk"); + if (IS_ERR(pll_p_clk)) + return PTR_ERR(pll_p_clk); + + emc_clk = clk_get_sys("cpu", "emc"); + if (IS_ERR(emc_clk)) { + clk_put(cpu_clk); + return PTR_ERR(emc_clk); + } + return cpufreq_register_driver(&tegra_cpufreq_driver); } static void __exit tegra_cpufreq_exit(void) { cpufreq_unregister_driver(&tegra_cpufreq_driver); + clk_put(emc_clk); + clk_put(cpu_clk); } diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c new file mode 100644 index 0000000..0f4e8c4 --- /dev/null +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -0,0 +1,61 @@ +/* + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/cpuidle.h> + +#include <asm/cpuidle.h> + +static struct cpuidle_driver tegra_idle_driver = { + .name = "tegra_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .state_count = 1, + .states = { + [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); + +int __init tegra114_cpuidle_init(void) +{ + int ret; + unsigned int cpu; + struct cpuidle_device *dev; + struct cpuidle_driver *drv = &tegra_idle_driver; + + ret = cpuidle_register_driver(&tegra_idle_driver); + if (ret) { + pr_err("CPUidle driver registration failed\n"); + return ret; + } + + for_each_possible_cpu(cpu) { + dev = &per_cpu(tegra_idle_device, cpu); + dev->cpu = cpu; + + dev->state_count = drv->state_count; + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("CPU%u: CPUidle device registration failed\n", + cpu); + return ret; + } + } + return 0; +} diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index d32e8b0..825ced4 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -22,21 +22,199 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/clockchips.h> +#include <linux/clk/tegra.h> #include <asm/cpuidle.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> +#include <asm/smp_plat.h> + +#include "pm.h" +#include "sleep.h" +#include "iomap.h" +#include "irq.h" +#include "flowctrl.h" + +#ifdef CONFIG_PM_SLEEP +static bool abort_flag; +static atomic_t abort_barrier; +static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index); +#endif + +static struct cpuidle_state tegra_idle_states[] = { + [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), +#ifdef CONFIG_PM_SLEEP + [1] = { + .enter = tegra20_idle_lp2_coupled, + .exit_latency = 5000, + .target_residency = 10000, + .power_usage = 0, + .flags = CPUIDLE_FLAG_TIME_VALID | + CPUIDLE_FLAG_COUPLED, + .name = "powered-down", + .desc = "CPU power gated", + }, +#endif +}; static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, .en_core_tk_irqen = 1, - .state_count = 1, - .states = { - [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), - }, }; static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device); +#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_SMP +static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE); + +static int tegra20_reset_sleeping_cpu_1(void) +{ + int ret = 0; + + tegra_pen_lock(); + + if (readl(pmc + PMC_SCRATCH41) == CPU_RESETTABLE) + tegra20_cpu_shutdown(1); + else + ret = -EINVAL; + + tegra_pen_unlock(); + + return ret; +} + +static void tegra20_wake_cpu1_from_reset(void) +{ + tegra_pen_lock(); + + tegra20_cpu_clear_resettable(); + + /* enable cpu clock on cpu */ + tegra_enable_cpu_clock(1); + + /* take the CPU out of reset */ + tegra_cpu_out_of_reset(1); + + /* unhalt the cpu */ + flowctrl_write_cpu_halt(1, 0); + + tegra_pen_unlock(); +} + +static int tegra20_reset_cpu_1(void) +{ + if (!cpu_online(1) || !tegra20_reset_sleeping_cpu_1()) + return 0; + + tegra20_wake_cpu1_from_reset(); + return -EBUSY; +} +#else +static inline void tegra20_wake_cpu1_from_reset(void) +{ +} + +static inline int tegra20_reset_cpu_1(void) +{ + return 0; +} +#endif + +static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + struct cpuidle_state *state = &drv->states[index]; + u32 cpu_on_time = state->exit_latency; + u32 cpu_off_time = state->target_residency - state->exit_latency; + + while (tegra20_cpu_is_resettable_soon()) + cpu_relax(); + + if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready()) + return false; + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + tegra_idle_lp2_last(cpu_on_time, cpu_off_time); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + if (cpu_online(1)) + tegra20_wake_cpu1_from_reset(); + + return true; +} + +#ifdef CONFIG_SMP +static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + cpu_suspend(0, tegra20_sleep_cpu_secondary_finish); + + tegra20_cpu_clear_resettable(); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + return true; +} +#else +static inline bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + return true; +} +#endif + +static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu; + bool entered_lp2 = false; + + if (tegra_pending_sgi()) + ACCESS_ONCE(abort_flag) = true; + + cpuidle_coupled_parallel_barrier(dev, &abort_barrier); + + if (abort_flag) { + cpuidle_coupled_parallel_barrier(dev, &abort_barrier); + abort_flag = false; /* clean flag for next coming */ + return -EINTR; + } + + local_fiq_disable(); + + tegra_set_cpu_in_lp2(cpu); + cpu_pm_enter(); + + if (cpu == 0) + entered_lp2 = tegra20_cpu_cluster_power_down(dev, drv, index); + else + entered_lp2 = tegra20_idle_enter_lp2_cpu_1(dev, drv, index); + + cpu_pm_exit(); + tegra_clear_cpu_in_lp2(cpu); + + local_fiq_enable(); + + smp_rmb(); + + return entered_lp2 ? index : 0; +} +#endif + int __init tegra20_cpuidle_init(void) { int ret; @@ -44,6 +222,14 @@ int __init tegra20_cpuidle_init(void) struct cpuidle_device *dev; struct cpuidle_driver *drv = &tegra_idle_driver; +#ifdef CONFIG_PM_SLEEP + tegra_tear_down_cpu = tegra20_tear_down_cpu; +#endif + + drv->state_count = ARRAY_SIZE(tegra_idle_states); + memcpy(drv->states, tegra_idle_states, + drv->state_count * sizeof(drv->states[0])); + ret = cpuidle_register_driver(&tegra_idle_driver); if (ret) { pr_err("CPUidle driver registration failed\n"); @@ -53,6 +239,9 @@ int __init tegra20_cpuidle_init(void) for_each_possible_cpu(cpu) { dev = &per_cpu(tegra_idle_device, cpu); dev->cpu = cpu; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED + dev->coupled_cpus = *cpu_possible_mask; +#endif dev->state_count = drv->state_count; ret = cpuidle_register_device(dev); diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index 5e8cbf5..8b50cf4 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -24,6 +24,7 @@ #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/clockchips.h> +#include <linux/clk/tegra.h> #include <asm/cpuidle.h> #include <asm/proc-fns.h> @@ -32,7 +33,6 @@ #include "pm.h" #include "sleep.h" -#include "tegra_cpu_car.h" #ifdef CONFIG_PM_SLEEP static int tegra30_idle_lp2(struct cpuidle_device *dev, @@ -121,9 +121,9 @@ static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, } #endif -static int __cpuinit tegra30_idle_lp2(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) +static int tegra30_idle_lp2(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) { u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu; bool entered_lp2 = false; diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index d065139..4b744c4 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -38,6 +38,9 @@ static int __init tegra_cpuidle_init(void) case TEGRA30: ret = tegra30_cpuidle_init(); break; + case TEGRA114: + ret = tegra114_cpuidle_init(); + break; default: ret = -ENODEV; break; diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h index 496204d..d733f75d 100644 --- a/arch/arm/mach-tegra/cpuidle.h +++ b/arch/arm/mach-tegra/cpuidle.h @@ -29,4 +29,10 @@ int tegra30_cpuidle_init(void); static inline int tegra30_cpuidle_init(void) { return -ENODEV; } #endif +#ifdef CONFIG_ARCH_TEGRA_114_SOC +int tegra114_cpuidle_init(void); +#else +static inline int tegra114_cpuidle_init(void) { return -ENODEV; } +#endif + #endif diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index a2250dd..b477ef3 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c @@ -25,15 +25,16 @@ #include "flowctrl.h" #include "iomap.h" +#include "fuse.h" -u8 flowctrl_offset_halt_cpu[] = { +static u8 flowctrl_offset_halt_cpu[] = { FLOW_CTRL_HALT_CPU0_EVENTS, FLOW_CTRL_HALT_CPU1_EVENTS, FLOW_CTRL_HALT_CPU1_EVENTS + 8, FLOW_CTRL_HALT_CPU1_EVENTS + 16, }; -u8 flowctrl_offset_cpu_csr[] = { +static u8 flowctrl_offset_cpu_csr[] = { FLOW_CTRL_CPU0_CSR, FLOW_CTRL_CPU1_CSR, FLOW_CTRL_CPU1_CSR + 8, @@ -75,11 +76,26 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid) int i; reg = flowctrl_read_cpu_csr(cpuid); - reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */ - reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */ + switch (tegra_chip_id) { + case TEGRA20: + /* clear wfe bitmap */ + reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP; + /* clear wfi bitmap */ + reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP; + /* pwr gating on wfe */ + reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid; + break; + case TEGRA30: + /* clear wfe bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; + /* clear wfi bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; + /* pwr gating on wfi */ + reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; + break; + } reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr flag */ reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event flag */ - reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; /* pwr gating on wfi */ reg |= FLOW_CTRL_CSR_ENABLE; /* pwr gating */ flowctrl_write_cpu_csr(cpuid, reg); @@ -99,8 +115,20 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid) /* Disable powergating via flow controller for CPU0 */ reg = flowctrl_read_cpu_csr(cpuid); - reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfe bitmap */ - reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; /* clear wfi bitmap */ + switch (tegra_chip_id) { + case TEGRA20: + /* clear wfe bitmap */ + reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP; + /* clear wfi bitmap */ + reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP; + break; + case TEGRA30: + /* clear wfe bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; + /* clear wfi bitmap */ + reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; + break; + } reg &= ~FLOW_CTRL_CSR_ENABLE; /* clear enable */ reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr */ reg |= FLOW_CTRL_CSR_EVENT_FLAG; /* clear event */ diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index 0798dec..67eab56 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -34,6 +34,10 @@ #define FLOW_CTRL_HALT_CPU1_EVENTS 0x14 #define FLOW_CTRL_CPU1_CSR 0x18 +#define TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 (1 << 4) +#define TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP (3 << 4) +#define TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP 0 + #define TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 (1 << 8) #define TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP (0xF << 4) #define TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP (0xF << 8) diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index 8121742..f7db078 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -20,6 +20,7 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/export.h> +#include <linux/tegra-soc.h> #include "fuse.h" #include "iomap.h" @@ -105,6 +106,11 @@ static void tegra_get_process_id(void) tegra_core_process_id = (reg >> 12) & 3; } +u32 tegra_read_chipid(void) +{ + return readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804); +} + void tegra_init_fuse(void) { u32 id; @@ -119,7 +125,7 @@ void tegra_init_fuse(void) reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT); tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT; - id = readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804); + id = tegra_read_chipid(); tegra_chip_id = (id >> 8) & 0xff; switch (tegra_chip_id) { diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index ff1383d..da78434 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -37,6 +37,7 @@ enum tegra_revision { #define TEGRA20 0x20 #define TEGRA30 0x30 +#define TEGRA114 0x35 extern int tegra_sku_id; extern int tegra_cpu_process_id; diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index 4a317fa..fd473f2 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -1,66 +1,9 @@ #include <linux/linkage.h> #include <linux/init.h> -#include <asm/cache.h> -#include <asm/asm-offsets.h> -#include <asm/hardware/cache-l2x0.h> - -#include "flowctrl.h" -#include "iomap.h" -#include "reset.h" #include "sleep.h" -#define APB_MISC_GP_HIDREV 0x804 -#define PMC_SCRATCH41 0x140 - -#define RESET_DATA(x) ((TEGRA_RESET_##x)*4) - .section ".text.head", "ax" - __CPUINIT - -/* - * Tegra specific entry point for secondary CPUs. - * The secondary kernel init calls v7_flush_dcache_all before it enables - * the L1; however, the L1 comes out of reset in an undefined state, so - * the clean + invalidate performed by v7_flush_dcache_all causes a bunch - * of cache lines with uninitialized data and uninitialized tags to get - * written out to memory, which does really unpleasant things to the main - * processor. We fix this by performing an invalidate, rather than a - * clean + invalidate, before jumping into the kernel. - */ -ENTRY(v7_invalidate_l1) - mov r0, #0 - mcr p15, 2, r0, c0, c0, 0 - mrc p15, 1, r0, c0, c0, 0 - - ldr r1, =0x7fff - and r2, r1, r0, lsr #13 - - ldr r1, =0x3ff - - and r3, r1, r0, lsr #3 @ NumWays - 1 - add r2, r2, #1 @ NumSets - - and r0, r0, #0x7 - add r0, r0, #4 @ SetShift - - clz r1, r3 @ WayShift - add r4, r3, #1 @ NumWays -1: sub r2, r2, #1 @ NumSets-- - mov r3, r4 @ Temp = NumWays -2: subs r3, r3, #1 @ Temp-- - mov r5, r3, lsl r1 - mov r6, r2, lsl r0 - orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) - mcr p15, 0, r5, c7, c6, 2 - bgt 2b - cmp r2, #0 - bgt 1b - dsb - isb - mov pc, lr -ENDPROC(v7_invalidate_l1) - ENTRY(tegra_secondary_startup) bl v7_invalidate_l1 @@ -69,210 +12,3 @@ ENTRY(tegra_secondary_startup) mcr p14, 0, r0, c7, c12, 6 b secondary_startup ENDPROC(tegra_secondary_startup) - -#ifdef CONFIG_PM_SLEEP -/* - * tegra_resume - * - * CPU boot vector when restarting the a CPU following - * an LP2 transition. Also branched to by LP0 and LP1 resume after - * re-enabling sdram. - */ -ENTRY(tegra_resume) - bl v7_invalidate_l1 - /* Enable coresight */ - mov32 r0, 0xC5ACCE55 - mcr p14, 0, r0, c7, c12, 6 - - cpu_id r0 - cmp r0, #0 @ CPU0? - bne cpu_resume @ no - -#ifdef CONFIG_ARCH_TEGRA_3x_SOC - /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) - beq 1f @ Yes - /* Clear the flow controller flags for this CPU. */ - mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR - ldr r1, [r2] - /* Clear event & intr flag */ - orr r1, r1, \ - #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - movw r0, #0x0FFD @ enable, cluster_switch, immed, & bitmaps - bic r1, r1, r0 - str r1, [r2] -1: -#endif - -#ifdef CONFIG_HAVE_ARM_SCU - /* enable SCU */ - mov32 r0, TEGRA_ARM_PERIF_BASE - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] -#endif - - /* L2 cache resume & re-enable */ - l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr - - b cpu_resume -ENDPROC(tegra_resume) -#endif - -#ifdef CONFIG_CACHE_L2X0 - .globl l2x0_saved_regs_addr -l2x0_saved_regs_addr: - .long 0 -#endif - - .align L1_CACHE_SHIFT -ENTRY(__tegra_cpu_reset_handler_start) - -/* - * __tegra_cpu_reset_handler: - * - * Common handler for all CPU reset events. - * - * Register usage within the reset handler: - * - * R7 = CPU present (to the OS) mask - * R8 = CPU in LP1 state mask - * R9 = CPU in LP2 state mask - * R10 = CPU number - * R11 = CPU mask - * R12 = pointer to reset handler data - * - * NOTE: This code is copied to IRAM. All code and data accesses - * must be position-independent. - */ - - .align L1_CACHE_SHIFT -ENTRY(__tegra_cpu_reset_handler) - - cpsid aif, 0x13 @ SVC mode, interrupts disabled - mrc p15, 0, r10, c0, c0, 5 @ MPIDR - and r10, r10, #0x3 @ R10 = CPU number - mov r11, #1 - mov r11, r11, lsl r10 @ R11 = CPU mask - adr r12, __tegra_cpu_reset_handler_data - -#ifdef CONFIG_SMP - /* Does the OS know about this CPU? */ - ldr r7, [r12, #RESET_DATA(MASK_PRESENT)] - tst r7, r11 @ if !present - bleq __die @ CPU not present (to OS) -#endif - -#ifdef CONFIG_ARCH_TEGRA_2x_SOC - /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) - bne 1f - /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov32 r6, TEGRA_PMC_BASE - mov r0, #0 - cmp r10, #0 - strne r0, [r6, #PMC_SCRATCH41] -1: -#endif - - /* Waking up from LP2? */ - ldr r9, [r12, #RESET_DATA(MASK_LP2)] - tst r9, r11 @ if in_lp2 - beq __is_not_lp2 - ldr lr, [r12, #RESET_DATA(STARTUP_LP2)] - cmp lr, #0 - bleq __die @ no LP2 startup handler - bx lr - -__is_not_lp2: - -#ifdef CONFIG_SMP - /* - * Can only be secondary boot (initial or hotplug) but CPU 0 - * cannot be here. - */ - cmp r10, #0 - bleq __die @ CPU0 cannot be here - ldr lr, [r12, #RESET_DATA(STARTUP_SECONDARY)] - cmp lr, #0 - bleq __die @ no secondary startup handler - bx lr -#endif - -/* - * We don't know why the CPU reset. Just kill it. - * The LR register will contain the address we died at + 4. - */ - -__die: - sub lr, lr, #4 - mov32 r7, TEGRA_PMC_BASE - str lr, [r7, #PMC_SCRATCH41] - - mov32 r7, TEGRA_CLK_RESET_BASE - - /* Are we on Tegra20? */ - mov32 r6, TEGRA_APB_MISC_BASE - ldr r0, [r6, #APB_MISC_GP_HIDREV] - and r0, r0, #0xff00 - cmp r0, #(0x20 << 8) - bne 1f - -#ifdef CONFIG_ARCH_TEGRA_2x_SOC - mov32 r0, 0x1111 - mov r1, r0, lsl r10 - str r1, [r7, #0x340] @ CLK_RST_CPU_CMPLX_SET -#endif -1: -#ifdef CONFIG_ARCH_TEGRA_3x_SOC - mov32 r6, TEGRA_FLOW_CTRL_BASE - - cmp r10, #0 - moveq r1, #FLOW_CTRL_HALT_CPU0_EVENTS - moveq r2, #FLOW_CTRL_CPU0_CSR - movne r1, r10, lsl #3 - addne r2, r1, #(FLOW_CTRL_CPU1_CSR-8) - addne r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8) - - /* Clear CPU "event" and "interrupt" flags and power gate - it when halting but not before it is in the "WFI" state. */ - ldr r0, [r6, +r2] - orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG - orr r0, r0, #FLOW_CTRL_CSR_ENABLE - str r0, [r6, +r2] - - /* Unconditionally halt this CPU */ - mov r0, #FLOW_CTRL_WAITEVENT - str r0, [r6, +r1] - ldr r0, [r6, +r1] @ memory barrier - - dsb - isb - wfi @ CPU should be power gated here - - /* If the CPU didn't power gate above just kill it's clock. */ - - mov r0, r11, lsl #8 - str r0, [r7, #348] @ CLK_CPU_CMPLX_SET -#endif - - /* If the CPU still isn't dead, just spin here. */ - b . -ENDPROC(__tegra_cpu_reset_handler) - - .align L1_CACHE_SHIFT - .type __tegra_cpu_reset_handler_data, %object - .globl __tegra_cpu_reset_handler_data -__tegra_cpu_reset_handler_data: - .rept TEGRA_RESET_DATA_SIZE - .long 0 - .endr - .align L1_CACHE_SHIFT - -ENTRY(__tegra_cpu_reset_handler_end) diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index dca5141..a599f6e 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -10,15 +10,26 @@ */ #include <linux/kernel.h> #include <linux/smp.h> +#include <linux/clk/tegra.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include "sleep.h" -#include "tegra_cpu_car.h" static void (*tegra_hotplug_shutdown)(void); +int tegra_cpu_kill(unsigned cpu) +{ + cpu = cpu_logical_map(cpu); + + /* Clock gate the CPU */ + tegra_wait_cpu_in_reset(cpu); + tegra_disable_cpu_clock(cpu); + + return 1; +} + /* * platform-specific code to shutdown a CPU * @@ -26,18 +37,12 @@ static void (*tegra_hotplug_shutdown)(void); */ void __ref tegra_cpu_die(unsigned int cpu) { - cpu = cpu_logical_map(cpu); - - /* Flush the L1 data cache. */ - flush_cache_all(); + /* Clean L1 data cache */ + tegra_disable_clean_inv_dcache(); /* Shut down the current CPU. */ tegra_hotplug_shutdown(); - /* Clock gate the CPU */ - tegra_wait_cpu_in_reset(cpu); - tegra_disable_cpu_clock(cpu); - /* Should never return here. */ BUG(); } diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h deleted file mode 100644 index 95f3a54..0000000 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/clk.h - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_CLK_H -#define __MACH_CLK_H - -struct clk; - -enum tegra_clk_ex_param { - TEGRA_CLK_VI_INP_SEL, - TEGRA_CLK_DTV_INVERT, - TEGRA_CLK_NAND_PAD_DIV2_ENB, - TEGRA_CLK_PLLD_CSI_OUT_ENB, - TEGRA_CLK_PLLD_DSI_OUT_ENB, - TEGRA_CLK_PLLD_MIPI_MUX_SEL, -}; - -void tegra_periph_reset_deassert(struct clk *c); -void tegra_periph_reset_assert(struct clk *c); - -#ifndef CONFIG_COMMON_CLK -unsigned long clk_get_rate_all_locked(struct clk *c); -#endif - -void tegra2_sdmmc_tap_delay(struct clk *c, int delay); -int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting); - -#endif diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h index 485003f..0838641 100644 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ b/arch/arm/mach-tegra/include/mach/uncompress.h @@ -172,8 +172,4 @@ static inline void arch_decomp_setup(void) uart[UART_LCR << DEBUG_UART_SHIFT] = 3; } -static inline void arch_decomp_wdog(void) -{ -} - #endif diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index db8be51..399fbca 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -240,15 +240,6 @@ #define TEGRA_CSITE_BASE 0x70040000 #define TEGRA_CSITE_SIZE SZ_256K -#define TEGRA_USB_BASE 0xC5000000 -#define TEGRA_USB_SIZE SZ_16K - -#define TEGRA_USB2_BASE 0xC5004000 -#define TEGRA_USB2_SIZE SZ_16K - -#define TEGRA_USB3_BASE 0xC5008000 -#define TEGRA_USB3_SIZE SZ_16K - #define TEGRA_SDMMC1_BASE 0xC8000000 #define TEGRA_SDMMC1_SIZE SZ_512 diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index b7886f1..1952e82 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -22,8 +22,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/of.h> - -#include <asm/hardware/gic.h> +#include <linux/irqchip/arm-gic.h> #include "board.h" #include "iomap.h" @@ -45,6 +44,8 @@ #define FIRST_LEGACY_IRQ 32 +#define SGI_MASK 0xFFFF + static int num_ictlrs; static void __iomem *ictlr_reg_base[] = { @@ -55,6 +56,19 @@ static void __iomem *ictlr_reg_base[] = { IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE), }; +bool tegra_pending_sgi(void) +{ + u32 pending_set; + void __iomem *distbase = IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE); + + pending_set = readl_relaxed(distbase + GIC_DIST_PENDING_SET); + + if (pending_set & SGI_MASK) + return true; + + return false; +} + static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg) { void __iomem *base; diff --git a/arch/arm/mach-tegra/irq.h b/arch/arm/mach-tegra/irq.h new file mode 100644 index 0000000..5142649 --- /dev/null +++ b/arch/arm/mach-tegra/irq.h @@ -0,0 +1,22 @@ +/* + * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __TEGRA_IRQ_H +#define __TEGRA_IRQ_H + +bool tegra_pending_sgi(void); + +#endif diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index bffcd64..b60165f 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -33,11 +33,11 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/export.h> +#include <linux/clk/tegra.h> #include <asm/sizes.h> #include <asm/mach/pci.h> -#include <mach/clk.h> #include <mach/powergate.h> #include "board.h" diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 1b926df..2c6b3d5 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -18,25 +18,26 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/clk/tegra.h> #include <asm/cacheflush.h> -#include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/smp_scu.h> +#include <asm/smp_plat.h> #include <mach/powergate.h> #include "fuse.h" #include "flowctrl.h" #include "reset.h" -#include "tegra_cpu_car.h" #include "common.h" #include "iomap.h" extern void tegra_secondary_startup(void); -static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE); +static cpumask_t tegra_cpu_init_mask; #define EVP_CPU_RESET_VECTOR \ (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100) @@ -50,6 +51,7 @@ static void __cpuinit tegra_secondary_init(unsigned int cpu) */ gic_secondary_init(0); + cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } static int tegra20_power_up_cpu(unsigned int cpu) @@ -72,14 +74,42 @@ static int tegra30_power_up_cpu(unsigned int cpu) if (pwrgateid < 0) return pwrgateid; - /* If this is the first boot, toggle powergates directly. */ + /* + * The power up sequence of cold boot CPU and warm boot CPU + * was different. + * + * For warm boot CPU that was resumed from CPU hotplug, the + * power will be resumed automatically after un-halting the + * flow controller of the warm boot CPU. We need to wait for + * the confirmaiton that the CPU is powered then removing + * the IO clamps. + * For cold boot CPU, do not wait. After the cold boot CPU be + * booted, it will run to tegra_secondary_init() and set + * tegra_cpu_init_mask which influences what tegra30_power_up_cpu() + * next time around. + */ + if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) { + timeout = jiffies + msecs_to_jiffies(50); + do { + if (!tegra_powergate_is_powered(pwrgateid)) + goto remove_clamps; + udelay(10); + } while (time_before(jiffies, timeout)); + } + + /* + * The power status of the cold boot CPU is power gated as + * default. To power up the cold boot CPU, the power should + * be un-gated by un-toggling the power gate register + * manually. + */ if (!tegra_powergate_is_powered(pwrgateid)) { ret = tegra_powergate_power_on(pwrgateid); if (ret) return ret; /* Wait for the power to come up. */ - timeout = jiffies + 10*HZ; + timeout = jiffies + msecs_to_jiffies(100); while (tegra_powergate_is_powered(pwrgateid)) { if (time_after(jiffies, timeout)) return -ETIMEDOUT; @@ -87,6 +117,7 @@ static int tegra30_power_up_cpu(unsigned int cpu) } } +remove_clamps: /* CPU partition is powered. Enable the CPU clock. */ tegra_enable_cpu_clock(cpu); udelay(10); @@ -105,6 +136,8 @@ static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct * { int status; + cpu = cpu_logical_map(cpu); + /* * Force the CPU into reset. The CPU must remain in reset when the * flow controller state is cleared (which will cause the flow @@ -143,38 +176,21 @@ done: return status; } -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ -static void __init tegra_smp_init_cpus(void) -{ - unsigned int i, ncores = scu_get_core_count(scu_base); - - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); -} - static void __init tegra_smp_prepare_cpus(unsigned int max_cpus) { - tegra_cpu_reset_handler_init(); - scu_enable(scu_base); + /* Always mark the boot CPU (CPU0) as initialized. */ + cpumask_set_cpu(0, &tegra_cpu_init_mask); + + if (scu_a9_has_base()) + scu_enable(IO_ADDRESS(scu_a9_get_base())); } struct smp_operations tegra_smp_ops __initdata = { - .smp_init_cpus = tegra_smp_init_cpus, .smp_prepare_cpus = tegra_smp_prepare_cpus, .smp_secondary_init = tegra_secondary_init, .smp_boot_secondary = tegra_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU + .cpu_kill = tegra_cpu_kill, .cpu_die = tegra_cpu_die, .cpu_disable = tegra_cpu_disable, #endif diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 1b11707..523604d 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -24,6 +24,7 @@ #include <linux/cpu_pm.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/clk/tegra.h> #include <asm/smp_plat.h> #include <asm/cacheflush.h> @@ -35,8 +36,8 @@ #include "iomap.h" #include "reset.h" #include "flowctrl.h" +#include "fuse.h" #include "sleep.h" -#include "tegra_cpu_car.h" #define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ @@ -148,7 +149,7 @@ static void suspend_cpu_complex(void) save_cpu_arch_register(); } -void __cpuinit tegra_clear_cpu_in_lp2(int phy_cpu_id) +void tegra_clear_cpu_in_lp2(int phy_cpu_id) { u32 *cpu_in_lp2 = tegra_cpu_lp2_mask; @@ -160,7 +161,7 @@ void __cpuinit tegra_clear_cpu_in_lp2(int phy_cpu_id) spin_unlock(&tegra_lp2_lock); } -bool __cpuinit tegra_set_cpu_in_lp2(int phy_cpu_id) +bool tegra_set_cpu_in_lp2(int phy_cpu_id) { bool last_cpu = false; cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask; @@ -173,6 +174,8 @@ bool __cpuinit tegra_set_cpu_in_lp2(int phy_cpu_id) if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask)) last_cpu = true; + else if (tegra_chip_id == TEGRA20 && phy_cpu_id == 1) + tegra20_cpu_set_resettable_soon(); spin_unlock(&tegra_lp2_lock); return last_cpu; diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index 2cc1185..c6bc8f8 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -26,8 +26,8 @@ #include <linux/io.h> #include <linux/seq_file.h> #include <linux/spinlock.h> +#include <linux/clk/tegra.h> -#include <mach/clk.h> #include <mach/powergate.h> #include "fuse.h" diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S new file mode 100644 index 0000000..54382ce --- /dev/null +++ b/arch/arm/mach-tegra/reset-handler.S @@ -0,0 +1,239 @@ +/* + * Copyright (c) 2012, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + +#include <asm/cache.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> + +#include "flowctrl.h" +#include "iomap.h" +#include "reset.h" +#include "sleep.h" + +#define APB_MISC_GP_HIDREV 0x804 +#define PMC_SCRATCH41 0x140 + +#define RESET_DATA(x) ((TEGRA_RESET_##x)*4) + +#ifdef CONFIG_PM_SLEEP +/* + * tegra_resume + * + * CPU boot vector when restarting the a CPU following + * an LP2 transition. Also branched to by LP0 and LP1 resume after + * re-enabling sdram. + */ +ENTRY(tegra_resume) + bl v7_invalidate_l1 + /* Enable coresight */ + mov32 r0, 0xC5ACCE55 + mcr p14, 0, r0, c7, c12, 6 + + cpu_id r0 + cmp r0, #0 @ CPU0? + bne cpu_resume @ no + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC + /* Are we on Tegra20? */ + mov32 r6, TEGRA_APB_MISC_BASE + ldr r0, [r6, #APB_MISC_GP_HIDREV] + and r0, r0, #0xff00 + cmp r0, #(0x20 << 8) + beq 1f @ Yes + /* Clear the flow controller flags for this CPU. */ + mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR + ldr r1, [r2] + /* Clear event & intr flag */ + orr r1, r1, \ + #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + movw r0, #0x0FFD @ enable, cluster_switch, immed, & bitmaps + bic r1, r1, r0 + str r1, [r2] +1: +#endif + +#ifdef CONFIG_HAVE_ARM_SCU + /* enable SCU */ + mov32 r0, TEGRA_ARM_PERIF_BASE + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] +#endif + + /* L2 cache resume & re-enable */ + l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr + + b cpu_resume +ENDPROC(tegra_resume) +#endif + +#ifdef CONFIG_CACHE_L2X0 + .globl l2x0_saved_regs_addr +l2x0_saved_regs_addr: + .long 0 +#endif + + .align L1_CACHE_SHIFT +ENTRY(__tegra_cpu_reset_handler_start) + +/* + * __tegra_cpu_reset_handler: + * + * Common handler for all CPU reset events. + * + * Register usage within the reset handler: + * + * R7 = CPU present (to the OS) mask + * R8 = CPU in LP1 state mask + * R9 = CPU in LP2 state mask + * R10 = CPU number + * R11 = CPU mask + * R12 = pointer to reset handler data + * + * NOTE: This code is copied to IRAM. All code and data accesses + * must be position-independent. + */ + + .align L1_CACHE_SHIFT +ENTRY(__tegra_cpu_reset_handler) + + cpsid aif, 0x13 @ SVC mode, interrupts disabled + mrc p15, 0, r10, c0, c0, 5 @ MPIDR + and r10, r10, #0x3 @ R10 = CPU number + mov r11, #1 + mov r11, r11, lsl r10 @ R11 = CPU mask + adr r12, __tegra_cpu_reset_handler_data + +#ifdef CONFIG_SMP + /* Does the OS know about this CPU? */ + ldr r7, [r12, #RESET_DATA(MASK_PRESENT)] + tst r7, r11 @ if !present + bleq __die @ CPU not present (to OS) +#endif + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC + /* Are we on Tegra20? */ + mov32 r6, TEGRA_APB_MISC_BASE + ldr r0, [r6, #APB_MISC_GP_HIDREV] + and r0, r0, #0xff00 + cmp r0, #(0x20 << 8) + bne 1f + /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ + mov32 r6, TEGRA_PMC_BASE + mov r0, #0 + cmp r10, #0 + strne r0, [r6, #PMC_SCRATCH41] +1: +#endif + + /* Waking up from LP2? */ + ldr r9, [r12, #RESET_DATA(MASK_LP2)] + tst r9, r11 @ if in_lp2 + beq __is_not_lp2 + ldr lr, [r12, #RESET_DATA(STARTUP_LP2)] + cmp lr, #0 + bleq __die @ no LP2 startup handler + bx lr + +__is_not_lp2: + +#ifdef CONFIG_SMP + /* + * Can only be secondary boot (initial or hotplug) but CPU 0 + * cannot be here. + */ + cmp r10, #0 + bleq __die @ CPU0 cannot be here + ldr lr, [r12, #RESET_DATA(STARTUP_SECONDARY)] + cmp lr, #0 + bleq __die @ no secondary startup handler + bx lr +#endif + +/* + * We don't know why the CPU reset. Just kill it. + * The LR register will contain the address we died at + 4. + */ + +__die: + sub lr, lr, #4 + mov32 r7, TEGRA_PMC_BASE + str lr, [r7, #PMC_SCRATCH41] + + mov32 r7, TEGRA_CLK_RESET_BASE + + /* Are we on Tegra20? */ + mov32 r6, TEGRA_APB_MISC_BASE + ldr r0, [r6, #APB_MISC_GP_HIDREV] + and r0, r0, #0xff00 + cmp r0, #(0x20 << 8) + bne 1f + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC + mov32 r0, 0x1111 + mov r1, r0, lsl r10 + str r1, [r7, #0x340] @ CLK_RST_CPU_CMPLX_SET +#endif +1: +#ifdef CONFIG_ARCH_TEGRA_3x_SOC + mov32 r6, TEGRA_FLOW_CTRL_BASE + + cmp r10, #0 + moveq r1, #FLOW_CTRL_HALT_CPU0_EVENTS + moveq r2, #FLOW_CTRL_CPU0_CSR + movne r1, r10, lsl #3 + addne r2, r1, #(FLOW_CTRL_CPU1_CSR-8) + addne r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8) + + /* Clear CPU "event" and "interrupt" flags and power gate + it when halting but not before it is in the "WFI" state. */ + ldr r0, [r6, +r2] + orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG + orr r0, r0, #FLOW_CTRL_CSR_ENABLE + str r0, [r6, +r2] + + /* Unconditionally halt this CPU */ + mov r0, #FLOW_CTRL_WAITEVENT + str r0, [r6, +r1] + ldr r0, [r6, +r1] @ memory barrier + + dsb + isb + wfi @ CPU should be power gated here + + /* If the CPU didn't power gate above just kill it's clock. */ + + mov r0, r11, lsl #8 + str r0, [r7, #348] @ CLK_CPU_CMPLX_SET +#endif + + /* If the CPU still isn't dead, just spin here. */ + b . +ENDPROC(__tegra_cpu_reset_handler) + + .align L1_CACHE_SHIFT + .type __tegra_cpu_reset_handler_data, %object + .globl __tegra_cpu_reset_handler_data +__tegra_cpu_reset_handler_data: + .rept TEGRA_RESET_DATA_SIZE + .long 0 + .endr + .align L1_CACHE_SHIFT + +ENTRY(__tegra_cpu_reset_handler_end) diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 3fd89ec..1ac434e 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -75,7 +75,7 @@ void __init tegra_cpu_reset_handler_init(void) #ifdef CONFIG_SMP __tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] = - *((u32 *)cpu_present_mask); + *((u32 *)cpu_possible_mask); __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] = virt_to_phys((void *)tegra_secondary_startup); #endif diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 72ce709..9f6bfaf 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -21,6 +21,8 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/proc-fns.h> +#include <asm/cp15.h> #include "sleep.h" #include "flowctrl.h" @@ -33,9 +35,6 @@ * should never return */ ENTRY(tegra20_hotplug_shutdown) - /* Turn off SMP coherency */ - exit_smp r4, r5 - /* Put this CPU down */ cpu_id r0 bl tegra20_cpu_shutdown @@ -58,6 +57,9 @@ ENDPROC(tegra20_hotplug_shutdown) ENTRY(tegra20_cpu_shutdown) cmp r0, #0 moveq pc, lr @ must not be called for CPU 0 + mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov r12, #CPU_RESETTABLE + str r12, [r1] cpu_to_halt_reg r1, r0 ldr r3, =TEGRA_FLOW_CTRL_VIRT @@ -78,3 +80,198 @@ ENTRY(tegra20_cpu_shutdown) mov pc, lr ENDPROC(tegra20_cpu_shutdown) #endif + +#ifdef CONFIG_PM_SLEEP +/* + * tegra_pen_lock + * + * spinlock implementation with no atomic test-and-set and no coherence + * using Peterson's algorithm on strongly-ordered registers + * used to synchronize a cpu waking up from wfi with entering lp2 on idle + * + * The reference link of Peterson's algorithm: + * http://en.wikipedia.org/wiki/Peterson's_algorithm + * + * SCRATCH37 = r1 = !turn (inverted from Peterson's algorithm) + * on cpu 0: + * r2 = flag[0] (in SCRATCH38) + * r3 = flag[1] (in SCRATCH39) + * on cpu1: + * r2 = flag[1] (in SCRATCH39) + * r3 = flag[0] (in SCRATCH38) + * + * must be called with MMU on + * corrupts r0-r3, r12 + */ +ENTRY(tegra_pen_lock) + mov32 r3, TEGRA_PMC_VIRT + cpu_id r0 + add r1, r3, #PMC_SCRATCH37 + cmp r0, #0 + addeq r2, r3, #PMC_SCRATCH38 + addeq r3, r3, #PMC_SCRATCH39 + addne r2, r3, #PMC_SCRATCH39 + addne r3, r3, #PMC_SCRATCH38 + + mov r12, #1 + str r12, [r2] @ flag[cpu] = 1 + dsb + str r12, [r1] @ !turn = cpu +1: dsb + ldr r12, [r3] + cmp r12, #1 @ flag[!cpu] == 1? + ldreq r12, [r1] + cmpeq r12, r0 @ !turn == cpu? + beq 1b @ while !turn == cpu && flag[!cpu] == 1 + + mov pc, lr @ locked +ENDPROC(tegra_pen_lock) + +ENTRY(tegra_pen_unlock) + dsb + mov32 r3, TEGRA_PMC_VIRT + cpu_id r0 + cmp r0, #0 + addeq r2, r3, #PMC_SCRATCH38 + addne r2, r3, #PMC_SCRATCH39 + mov r12, #0 + str r12, [r2] + mov pc, lr +ENDPROC(tegra_pen_unlock) + +/* + * tegra20_cpu_clear_resettable(void) + * + * Called to clear the "resettable soon" flag in PMC_SCRATCH41 when + * it is expected that the secondary CPU will be idle soon. + */ +ENTRY(tegra20_cpu_clear_resettable) + mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov r12, #CPU_NOT_RESETTABLE + str r12, [r1] + mov pc, lr +ENDPROC(tegra20_cpu_clear_resettable) + +/* + * tegra20_cpu_set_resettable_soon(void) + * + * Called to set the "resettable soon" flag in PMC_SCRATCH41 when + * it is expected that the secondary CPU will be idle soon. + */ +ENTRY(tegra20_cpu_set_resettable_soon) + mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov r12, #CPU_RESETTABLE_SOON + str r12, [r1] + mov pc, lr +ENDPROC(tegra20_cpu_set_resettable_soon) + +/* + * tegra20_cpu_is_resettable_soon(void) + * + * Returns true if the "resettable soon" flag in PMC_SCRATCH41 has been + * set because it is expected that the secondary CPU will be idle soon. + */ +ENTRY(tegra20_cpu_is_resettable_soon) + mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41 + ldr r12, [r1] + cmp r12, #CPU_RESETTABLE_SOON + moveq r0, #1 + movne r0, #0 + mov pc, lr +ENDPROC(tegra20_cpu_is_resettable_soon) + +/* + * tegra20_sleep_cpu_secondary_finish(unsigned long v2p) + * + * Enters WFI on secondary CPU by exiting coherency. + */ +ENTRY(tegra20_sleep_cpu_secondary_finish) + stmfd sp!, {r4-r11, lr} + + mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency + + /* Flush and disable the L1 data cache */ + bl tegra_disable_clean_inv_dcache + + mov32 r0, TEGRA_PMC_VIRT + PMC_SCRATCH41 + mov r3, #CPU_RESETTABLE + str r3, [r0] + + bl cpu_do_idle + + /* + * cpu may be reset while in wfi, which will return through + * tegra_resume to cpu_resume + * or interrupt may wake wfi, which will return here + * cpu state is unchanged - MMU is on, cache is on, coherency + * is off, and the data cache is off + * + * r11 contains the original actlr + */ + + bl tegra_pen_lock + + mov32 r3, TEGRA_PMC_VIRT + add r0, r3, #PMC_SCRATCH41 + mov r3, #CPU_NOT_RESETTABLE + str r3, [r0] + + bl tegra_pen_unlock + + /* Re-enable the data cache */ + mrc p15, 0, r10, c1, c0, 0 + orr r10, r10, #CR_C + mcr p15, 0, r10, c1, c0, 0 + isb + + mcr p15, 0, r11, c1, c0, 1 @ reenable coherency + + /* Invalidate the TLBs & BTAC */ + mov r1, #0 + mcr p15, 0, r1, c8, c3, 0 @ invalidate shared TLBs + mcr p15, 0, r1, c7, c1, 6 @ invalidate shared BTAC + dsb + isb + + /* the cpu was running with coherency disabled, + * caches may be out of date */ + bl v7_flush_kern_cache_louis + + ldmfd sp!, {r4 - r11, pc} +ENDPROC(tegra20_sleep_cpu_secondary_finish) + +/* + * tegra20_tear_down_cpu + * + * Switches the CPU cluster to PLL-P and enters sleep. + */ +ENTRY(tegra20_tear_down_cpu) + bl tegra_switch_cpu_to_pllp + b tegra20_enter_sleep +ENDPROC(tegra20_tear_down_cpu) + +/* + * tegra20_enter_sleep + * + * uses flow controller to enter sleep state + * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1 + * executes from SDRAM with target state is LP2 + */ +tegra20_enter_sleep: + mov32 r6, TEGRA_FLOW_CTRL_BASE + + mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT + orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ + cpu_id r1 + cpu_to_halt_reg r1, r1 + str r0, [r6, r1] + dsb + ldr r0, [r6, r1] /* memory barrier */ + +halted: + dsb + wfe /* CPU should be power gated here */ + isb + b halted + +#endif diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 562a8e7..63a15bd 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -32,9 +32,6 @@ * Should never return. */ ENTRY(tegra30_hotplug_shutdown) - /* Turn off SMP coherency */ - exit_smp r4, r5 - /* Powergate this CPU */ mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN bl tegra30_cpu_shutdown diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 26afa7c..364d845 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -34,7 +34,10 @@ #include "flowctrl.h" #include "sleep.h" -#ifdef CONFIG_PM_SLEEP +#define CLK_RESET_CCLK_BURST 0x20 +#define CLK_RESET_CCLK_DIVIDER 0x24 + +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) /* * tegra_disable_clean_inv_dcache * @@ -60,7 +63,9 @@ ENTRY(tegra_disable_clean_inv_dcache) ldmfd sp!, {r0, r4-r5, r7, r9-r11, pc} ENDPROC(tegra_disable_clean_inv_dcache) +#endif +#ifdef CONFIG_PM_SLEEP /* * tegra_sleep_cpu_finish(unsigned long v2p) * @@ -108,4 +113,20 @@ ENTRY(tegra_shut_off_mmu) mov pc, r0 ENDPROC(tegra_shut_off_mmu) .popsection + +/* + * tegra_switch_cpu_to_pllp + * + * In LP2 the normal cpu clock pllx will be turned off. Switch the CPU to pllp + */ +ENTRY(tegra_switch_cpu_to_pllp) + /* in LP2 idle (SDRAM active), set the CPU burst policy to PLLP */ + mov32 r5, TEGRA_CLK_RESET_BASE + mov r0, #(2 << 28) @ burst policy = run mode + orr r0, r0, #(4 << 4) @ use PLLP in run mode burst + str r0, [r5, #CLK_RESET_CCLK_BURST] + mov r0, #0 + str r0, [r5, #CLK_RESET_CCLK_DIVIDER] + mov pc, lr +ENDPROC(tegra_switch_cpu_to_pllp) #endif diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 9821ee7..4ffae54 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -25,6 +25,19 @@ + IO_PPSB_VIRT) #define TEGRA_CLK_RESET_VIRT (TEGRA_CLK_RESET_BASE - IO_PPSB_PHYS \ + IO_PPSB_VIRT) +#define TEGRA_PMC_VIRT (TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT) + +/* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */ +#define PMC_SCRATCH37 0x130 +#define PMC_SCRATCH38 0x134 +#define PMC_SCRATCH39 0x138 +#define PMC_SCRATCH41 0x140 + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +#define CPU_RESETTABLE 2 +#define CPU_RESETTABLE_SOON 1 +#define CPU_NOT_RESETTABLE 0 +#endif #ifdef __ASSEMBLY__ /* returns the offset of the flow controller halt register for a cpu */ @@ -104,8 +117,11 @@ exit_l2_resume: .endm #endif /* CONFIG_CACHE_L2X0 */ #else +void tegra_pen_lock(void); +void tegra_pen_unlock(void); void tegra_resume(void); int tegra_sleep_cpu_finish(unsigned long); +void tegra_disable_clean_inv_dcache(void); #ifdef CONFIG_HOTPLUG_CPU void tegra20_hotplug_init(void); @@ -115,6 +131,17 @@ static inline void tegra20_hotplug_init(void) {} static inline void tegra30_hotplug_init(void) {} #endif +void tegra20_cpu_shutdown(int cpu); +int tegra20_cpu_is_resettable_soon(void); +void tegra20_cpu_clear_resettable(void); +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +void tegra20_cpu_set_resettable_soon(void); +#else +static inline void tegra20_cpu_set_resettable_soon(void) {} +#endif + +int tegra20_sleep_cpu_secondary_finish(unsigned long); +void tegra20_tear_down_cpu(void); int tegra30_sleep_cpu_secondary_finish(unsigned long); void tegra30_tear_down_cpu(void); diff --git a/arch/arm/mach-tegra/tegra20_clocks.c b/arch/arm/mach-tegra/tegra20_clocks.c deleted file mode 100644 index 4eb6bc8..0000000 --- a/arch/arm/mach-tegra/tegra20_clocks.c +++ /dev/null @@ -1,1623 +0,0 @@ -/* - * arch/arm/mach-tegra/tegra20_clocks.c - * - * Copyright (C) 2010 Google, Inc. - * Copyright (c) 2010-2012 NVIDIA CORPORATION. All rights reserved. - * - * Author: - * Colin Cross <ccross@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/list.h> -#include <linux/spinlock.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/clkdev.h> -#include <linux/clk.h> - -#include "clock.h" -#include "fuse.h" -#include "iomap.h" -#include "tegra2_emc.h" -#include "tegra_cpu_car.h" - -#define RST_DEVICES 0x004 -#define RST_DEVICES_SET 0x300 -#define RST_DEVICES_CLR 0x304 -#define RST_DEVICES_NUM 3 - -#define CLK_OUT_ENB 0x010 -#define CLK_OUT_ENB_SET 0x320 -#define CLK_OUT_ENB_CLR 0x324 -#define CLK_OUT_ENB_NUM 3 - -#define CLK_MASK_ARM 0x44 -#define MISC_CLK_ENB 0x48 - -#define OSC_CTRL 0x50 -#define OSC_CTRL_OSC_FREQ_MASK (3<<30) -#define OSC_CTRL_OSC_FREQ_13MHZ (0<<30) -#define OSC_CTRL_OSC_FREQ_19_2MHZ (1<<30) -#define OSC_CTRL_OSC_FREQ_12MHZ (2<<30) -#define OSC_CTRL_OSC_FREQ_26MHZ (3<<30) -#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK) - -#define OSC_FREQ_DET 0x58 -#define OSC_FREQ_DET_TRIG (1<<31) - -#define OSC_FREQ_DET_STATUS 0x5C -#define OSC_FREQ_DET_BUSY (1<<31) -#define OSC_FREQ_DET_CNT_MASK 0xFFFF - -#define PERIPH_CLK_SOURCE_I2S1 0x100 -#define PERIPH_CLK_SOURCE_EMC 0x19c -#define PERIPH_CLK_SOURCE_OSC 0x1fc -#define PERIPH_CLK_SOURCE_NUM \ - ((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4) - -#define PERIPH_CLK_SOURCE_MASK (3<<30) -#define PERIPH_CLK_SOURCE_SHIFT 30 -#define PERIPH_CLK_SOURCE_PWM_MASK (7<<28) -#define PERIPH_CLK_SOURCE_PWM_SHIFT 28 -#define PERIPH_CLK_SOURCE_ENABLE (1<<28) -#define PERIPH_CLK_SOURCE_DIVU71_MASK 0xFF -#define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF -#define PERIPH_CLK_SOURCE_DIV_SHIFT 0 - -#define SDMMC_CLK_INT_FB_SEL (1 << 23) -#define SDMMC_CLK_INT_FB_DLY_SHIFT 16 -#define SDMMC_CLK_INT_FB_DLY_MASK (0xF << SDMMC_CLK_INT_FB_DLY_SHIFT) - -#define PLL_BASE 0x0 -#define PLL_BASE_BYPASS (1<<31) -#define PLL_BASE_ENABLE (1<<30) -#define PLL_BASE_REF_ENABLE (1<<29) -#define PLL_BASE_OVERRIDE (1<<28) -#define PLL_BASE_DIVP_MASK (0x7<<20) -#define PLL_BASE_DIVP_SHIFT 20 -#define PLL_BASE_DIVN_MASK (0x3FF<<8) -#define PLL_BASE_DIVN_SHIFT 8 -#define PLL_BASE_DIVM_MASK (0x1F) -#define PLL_BASE_DIVM_SHIFT 0 - -#define PLL_OUT_RATIO_MASK (0xFF<<8) -#define PLL_OUT_RATIO_SHIFT 8 -#define PLL_OUT_OVERRIDE (1<<2) -#define PLL_OUT_CLKEN (1<<1) -#define PLL_OUT_RESET_DISABLE (1<<0) - -#define PLL_MISC(c) (((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc) - -#define PLL_MISC_DCCON_SHIFT 20 -#define PLL_MISC_CPCON_SHIFT 8 -#define PLL_MISC_CPCON_MASK (0xF<<PLL_MISC_CPCON_SHIFT) -#define PLL_MISC_LFCON_SHIFT 4 -#define PLL_MISC_LFCON_MASK (0xF<<PLL_MISC_LFCON_SHIFT) -#define PLL_MISC_VCOCON_SHIFT 0 -#define PLL_MISC_VCOCON_MASK (0xF<<PLL_MISC_VCOCON_SHIFT) - -#define PLLU_BASE_POST_DIV (1<<20) - -#define PLLD_MISC_CLKENABLE (1<<30) -#define PLLD_MISC_DIV_RST (1<<23) -#define PLLD_MISC_DCCON_SHIFT 12 - -#define PLLE_MISC_READY (1 << 15) - -#define PERIPH_CLK_TO_ENB_REG(c) ((c->u.periph.clk_num / 32) * 4) -#define PERIPH_CLK_TO_ENB_SET_REG(c) ((c->u.periph.clk_num / 32) * 8) -#define PERIPH_CLK_TO_ENB_BIT(c) (1 << (c->u.periph.clk_num % 32)) - -#define SUPER_CLK_MUX 0x00 -#define SUPER_STATE_SHIFT 28 -#define SUPER_STATE_MASK (0xF << SUPER_STATE_SHIFT) -#define SUPER_STATE_STANDBY (0x0 << SUPER_STATE_SHIFT) -#define SUPER_STATE_IDLE (0x1 << SUPER_STATE_SHIFT) -#define SUPER_STATE_RUN (0x2 << SUPER_STATE_SHIFT) -#define SUPER_STATE_IRQ (0x3 << SUPER_STATE_SHIFT) -#define SUPER_STATE_FIQ (0x4 << SUPER_STATE_SHIFT) -#define SUPER_SOURCE_MASK 0xF -#define SUPER_FIQ_SOURCE_SHIFT 12 -#define SUPER_IRQ_SOURCE_SHIFT 8 -#define SUPER_RUN_SOURCE_SHIFT 4 -#define SUPER_IDLE_SOURCE_SHIFT 0 - -#define SUPER_CLK_DIVIDER 0x04 - -#define BUS_CLK_DISABLE (1<<3) -#define BUS_CLK_DIV_MASK 0x3 - -#define PMC_CTRL 0x0 - #define PMC_CTRL_BLINK_ENB (1 << 7) - -#define PMC_DPD_PADS_ORIDE 0x1c - #define PMC_DPD_PADS_ORIDE_BLINK_ENB (1 << 20) - -#define PMC_BLINK_TIMER_DATA_ON_SHIFT 0 -#define PMC_BLINK_TIMER_DATA_ON_MASK 0x7fff -#define PMC_BLINK_TIMER_ENB (1 << 15) -#define PMC_BLINK_TIMER_DATA_OFF_SHIFT 16 -#define PMC_BLINK_TIMER_DATA_OFF_MASK 0xffff - -/* Tegra CPU clock and reset control regs */ -#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c -#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340 -#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR 0x344 - -#define CPU_CLOCK(cpu) (0x1 << (8 + cpu)) -#define CPU_RESET(cpu) (0x1111ul << (cpu)) - -static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE); -static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); - -/* - * Some clocks share a register with other clocks. Any clock op that - * non-atomically modifies a register used by another clock must lock - * clock_register_lock first. - */ -static DEFINE_SPINLOCK(clock_register_lock); - -/* - * Some peripheral clocks share an enable bit, so refcount the enable bits - * in registers CLK_ENABLE_L, CLK_ENABLE_H, and CLK_ENABLE_U - */ -static int tegra_periph_clk_enable_refcount[3 * 32]; - -#define clk_writel(value, reg) \ - __raw_writel(value, reg_clk_base + (reg)) -#define clk_readl(reg) \ - __raw_readl(reg_clk_base + (reg)) -#define pmc_writel(value, reg) \ - __raw_writel(value, reg_pmc_base + (reg)) -#define pmc_readl(reg) \ - __raw_readl(reg_pmc_base + (reg)) - -static unsigned long clk_measure_input_freq(void) -{ - u32 clock_autodetect; - clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET); - do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY); - clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS); - if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) { - return 12000000; - } else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) { - return 13000000; - } else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) { - return 19200000; - } else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) { - return 26000000; - } else { - pr_err("%s: Unexpected clock autodetect value %d", - __func__, clock_autodetect); - BUG(); - return 0; - } -} - -static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate) -{ - s64 divider_u71 = parent_rate * 2; - divider_u71 += rate - 1; - do_div(divider_u71, rate); - - if (divider_u71 - 2 < 0) - return 0; - - if (divider_u71 - 2 > 255) - return -EINVAL; - - return divider_u71 - 2; -} - -static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate) -{ - s64 divider_u16; - - divider_u16 = parent_rate; - divider_u16 += rate - 1; - do_div(divider_u16, rate); - - if (divider_u16 - 1 < 0) - return 0; - - if (divider_u16 - 1 > 0xFFFF) - return -EINVAL; - - return divider_u16 - 1; -} - -static unsigned long tegra_clk_fixed_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - return to_clk_tegra(hw)->fixed_rate; -} - -struct clk_ops tegra_clk_32k_ops = { - .recalc_rate = tegra_clk_fixed_recalc_rate, -}; - -/* clk_m functions */ -static unsigned long tegra20_clk_m_recalc_rate(struct clk_hw *hw, - unsigned long prate) -{ - if (!to_clk_tegra(hw)->fixed_rate) - to_clk_tegra(hw)->fixed_rate = clk_measure_input_freq(); - return to_clk_tegra(hw)->fixed_rate; -} - -static void tegra20_clk_m_init(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 osc_ctrl = clk_readl(OSC_CTRL); - u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK; - - switch (c->fixed_rate) { - case 12000000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ; - break; - case 13000000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ; - break; - case 19200000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ; - break; - case 26000000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ; - break; - default: - BUG(); - } - clk_writel(auto_clock_control, OSC_CTRL); -} - -struct clk_ops tegra_clk_m_ops = { - .init = tegra20_clk_m_init, - .recalc_rate = tegra20_clk_m_recalc_rate, -}; - -/* super clock functions */ -/* "super clocks" on tegra have two-stage muxes and a clock skipping - * super divider. We will ignore the clock skipping divider, since we - * can't lower the voltage when using the clock skip, but we can if we - * lower the PLL frequency. - */ -static int tegra20_super_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - val = clk_readl(c->reg + SUPER_CLK_MUX); - BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) && - ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE)); - c->state = ON; - return c->state; -} - -static int tegra20_super_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - clk_writel(0, c->reg + SUPER_CLK_DIVIDER); - return 0; -} - -static void tegra20_super_clk_disable(struct clk_hw *hw) -{ - pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk)); - - /* oops - don't disable the CPU clock! */ - BUG(); -} - -static u8 tegra20_super_clk_get_parent(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - int val = clk_readl(c->reg + SUPER_CLK_MUX); - int source; - int shift; - - BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) && - ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE)); - shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ? - SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT; - source = (val >> shift) & SUPER_SOURCE_MASK; - return source; -} - -static int tegra20_super_clk_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg + SUPER_CLK_MUX); - int shift; - - BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) && - ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE)); - shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ? - SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT; - val &= ~(SUPER_SOURCE_MASK << shift); - val |= index << shift; - - clk_writel(val, c->reg); - - return 0; -} - -/* FIX ME: Need to switch parents to change the source PLL rate */ -static unsigned long tegra20_super_clk_recalc_rate(struct clk_hw *hw, - unsigned long prate) -{ - return prate; -} - -static long tegra20_super_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - return *prate; -} - -static int tegra20_super_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - return 0; -} - -struct clk_ops tegra_super_ops = { - .is_enabled = tegra20_super_clk_is_enabled, - .enable = tegra20_super_clk_enable, - .disable = tegra20_super_clk_disable, - .set_parent = tegra20_super_clk_set_parent, - .get_parent = tegra20_super_clk_get_parent, - .set_rate = tegra20_super_clk_set_rate, - .round_rate = tegra20_super_clk_round_rate, - .recalc_rate = tegra20_super_clk_recalc_rate, -}; - -static unsigned long tegra20_twd_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = parent_rate; - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - - return rate; -} - -struct clk_ops tegra_twd_ops = { - .recalc_rate = tegra20_twd_clk_recalc_rate, -}; - -static u8 tegra20_cop_clk_get_parent(struct clk_hw *hw) -{ - return 0; -} - -struct clk_ops tegra_cop_ops = { - .get_parent = tegra20_cop_clk_get_parent, -}; - -/* virtual cop clock functions. Used to acquire the fake 'cop' clock to - * reset the COP block (i.e. AVP) */ -void tegra2_cop_clk_reset(struct clk_hw *hw, bool assert) -{ - unsigned long reg = assert ? RST_DEVICES_SET : RST_DEVICES_CLR; - - pr_debug("%s %s\n", __func__, assert ? "assert" : "deassert"); - clk_writel(1 << 1, reg); -} - -/* bus clock functions */ -static int tegra20_bus_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - - c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON; - return c->state; -} - -static int tegra20_bus_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long flags; - u32 val; - - spin_lock_irqsave(&clock_register_lock, flags); - - val = clk_readl(c->reg); - val &= ~(BUS_CLK_DISABLE << c->reg_shift); - clk_writel(val, c->reg); - - spin_unlock_irqrestore(&clock_register_lock, flags); - - return 0; -} - -static void tegra20_bus_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long flags; - u32 val; - - spin_lock_irqsave(&clock_register_lock, flags); - - val = clk_readl(c->reg); - val |= BUS_CLK_DISABLE << c->reg_shift; - clk_writel(val, c->reg); - - spin_unlock_irqrestore(&clock_register_lock, flags); -} - -static unsigned long tegra20_bus_clk_recalc_rate(struct clk_hw *hw, - unsigned long prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - u64 rate = prate; - - c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1; - c->mul = 1; - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - return rate; -} - -static int tegra20_bus_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - int ret = -EINVAL; - unsigned long flags; - u32 val; - int i; - - spin_lock_irqsave(&clock_register_lock, flags); - - val = clk_readl(c->reg); - for (i = 1; i <= 4; i++) { - if (rate == parent_rate / i) { - val &= ~(BUS_CLK_DIV_MASK << c->reg_shift); - val |= (i - 1) << c->reg_shift; - clk_writel(val, c->reg); - c->div = i; - c->mul = 1; - ret = 0; - break; - } - } - - spin_unlock_irqrestore(&clock_register_lock, flags); - - return ret; -} - -static long tegra20_bus_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - unsigned long parent_rate = *prate; - s64 divider; - - if (rate >= parent_rate) - return rate; - - divider = parent_rate; - divider += rate - 1; - do_div(divider, rate); - - if (divider < 0) - return divider; - - if (divider > 4) - divider = 4; - do_div(parent_rate, divider); - - return parent_rate; -} - -struct clk_ops tegra_bus_ops = { - .is_enabled = tegra20_bus_clk_is_enabled, - .enable = tegra20_bus_clk_enable, - .disable = tegra20_bus_clk_disable, - .set_rate = tegra20_bus_clk_set_rate, - .round_rate = tegra20_bus_clk_round_rate, - .recalc_rate = tegra20_bus_clk_recalc_rate, -}; - -/* Blink output functions */ -static int tegra20_blink_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - val = pmc_readl(PMC_CTRL); - c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF; - return c->state; -} - -static unsigned long tegra20_blink_clk_recalc_rate(struct clk_hw *hw, - unsigned long prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = prate; - u32 val; - - c->mul = 1; - val = pmc_readl(c->reg); - - if (val & PMC_BLINK_TIMER_ENB) { - unsigned int on_off; - - on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) & - PMC_BLINK_TIMER_DATA_ON_MASK; - val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT; - val &= PMC_BLINK_TIMER_DATA_OFF_MASK; - on_off += val; - /* each tick in the blink timer is 4 32KHz clocks */ - c->div = on_off * 4; - } else { - c->div = 1; - } - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - return rate; -} - -static int tegra20_blink_clk_enable(struct clk_hw *hw) -{ - u32 val; - - val = pmc_readl(PMC_DPD_PADS_ORIDE); - pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE); - - val = pmc_readl(PMC_CTRL); - pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL); - - return 0; -} - -static void tegra20_blink_clk_disable(struct clk_hw *hw) -{ - u32 val; - - val = pmc_readl(PMC_CTRL); - pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL); - - val = pmc_readl(PMC_DPD_PADS_ORIDE); - pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE); -} - -static int tegra20_blink_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - if (rate >= parent_rate) { - c->div = 1; - pmc_writel(0, c->reg); - } else { - unsigned int on_off; - u32 val; - - on_off = DIV_ROUND_UP(parent_rate / 8, rate); - c->div = on_off * 8; - - val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) << - PMC_BLINK_TIMER_DATA_ON_SHIFT; - on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK; - on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT; - val |= on_off; - val |= PMC_BLINK_TIMER_ENB; - pmc_writel(val, c->reg); - } - - return 0; -} - -static long tegra20_blink_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - int div; - int mul; - long round_rate = *prate; - - mul = 1; - - if (rate >= *prate) { - div = 1; - } else { - div = DIV_ROUND_UP(*prate / 8, rate); - div *= 8; - } - - round_rate *= mul; - round_rate += div - 1; - do_div(round_rate, div); - - return round_rate; -} - -struct clk_ops tegra_blink_clk_ops = { - .is_enabled = tegra20_blink_clk_is_enabled, - .enable = tegra20_blink_clk_enable, - .disable = tegra20_blink_clk_disable, - .set_rate = tegra20_blink_clk_set_rate, - .round_rate = tegra20_blink_clk_round_rate, - .recalc_rate = tegra20_blink_clk_recalc_rate, -}; - -/* PLL Functions */ -static int tegra20_pll_clk_wait_for_lock(struct clk_tegra *c) -{ - udelay(c->u.pll.lock_delay); - return 0; -} - -static int tegra20_pll_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg + PLL_BASE); - - c->state = (val & PLL_BASE_ENABLE) ? ON : OFF; - return c->state; -} - -static unsigned long tegra20_pll_clk_recalc_rate(struct clk_hw *hw, - unsigned long prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg + PLL_BASE); - u64 rate = prate; - - if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) { - const struct clk_pll_freq_table *sel; - for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { - if (sel->input_rate == prate && - sel->output_rate == c->u.pll.fixed_rate) { - c->mul = sel->n; - c->div = sel->m * sel->p; - break; - } - } - pr_err("Clock %s has unknown fixed frequency\n", - __clk_get_name(hw->clk)); - BUG(); - } else if (val & PLL_BASE_BYPASS) { - c->mul = 1; - c->div = 1; - } else { - c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT; - c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT; - if (c->flags & PLLU) - c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2; - else - c->div *= (val & PLL_BASE_DIVP_MASK) ? 2 : 1; - } - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - return rate; -} - -static int tegra20_pll_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk)); - - val = clk_readl(c->reg + PLL_BASE); - val &= ~PLL_BASE_BYPASS; - val |= PLL_BASE_ENABLE; - clk_writel(val, c->reg + PLL_BASE); - - tegra20_pll_clk_wait_for_lock(c); - - return 0; -} - -static void tegra20_pll_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk)); - - val = clk_readl(c->reg); - val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE); - clk_writel(val, c->reg); -} - -static int tegra20_pll_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long input_rate = parent_rate; - const struct clk_pll_freq_table *sel; - u32 val; - - pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate); - - if (c->flags & PLL_FIXED) { - int ret = 0; - if (rate != c->u.pll.fixed_rate) { - pr_err("%s: Can not change %s fixed rate %lu to %lu\n", - __func__, __clk_get_name(hw->clk), - c->u.pll.fixed_rate, rate); - ret = -EINVAL; - } - return ret; - } - - for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { - if (sel->input_rate == input_rate && sel->output_rate == rate) { - c->mul = sel->n; - c->div = sel->m * sel->p; - - val = clk_readl(c->reg + PLL_BASE); - if (c->flags & PLL_FIXED) - val |= PLL_BASE_OVERRIDE; - val &= ~(PLL_BASE_DIVP_MASK | PLL_BASE_DIVN_MASK | - PLL_BASE_DIVM_MASK); - val |= (sel->m << PLL_BASE_DIVM_SHIFT) | - (sel->n << PLL_BASE_DIVN_SHIFT); - BUG_ON(sel->p < 1 || sel->p > 2); - if (c->flags & PLLU) { - if (sel->p == 1) - val |= PLLU_BASE_POST_DIV; - } else { - if (sel->p == 2) - val |= 1 << PLL_BASE_DIVP_SHIFT; - } - clk_writel(val, c->reg + PLL_BASE); - - if (c->flags & PLL_HAS_CPCON) { - val = clk_readl(c->reg + PLL_MISC(c)); - val &= ~PLL_MISC_CPCON_MASK; - val |= sel->cpcon << PLL_MISC_CPCON_SHIFT; - clk_writel(val, c->reg + PLL_MISC(c)); - } - - if (c->state == ON) - tegra20_pll_clk_enable(hw); - return 0; - } - } - return -EINVAL; -} - -static long tegra20_pll_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - const struct clk_pll_freq_table *sel; - unsigned long input_rate = *prate; - u64 output_rate = *prate; - int mul; - int div; - - if (c->flags & PLL_FIXED) - return c->u.pll.fixed_rate; - - for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) - if (sel->input_rate == input_rate && sel->output_rate == rate) { - mul = sel->n; - div = sel->m * sel->p; - break; - } - - if (sel->input_rate == 0) - return -EINVAL; - - output_rate *= mul; - output_rate += div - 1; /* round up */ - do_div(output_rate, div); - - return output_rate; -} - -struct clk_ops tegra_pll_ops = { - .is_enabled = tegra20_pll_clk_is_enabled, - .enable = tegra20_pll_clk_enable, - .disable = tegra20_pll_clk_disable, - .set_rate = tegra20_pll_clk_set_rate, - .recalc_rate = tegra20_pll_clk_recalc_rate, - .round_rate = tegra20_pll_clk_round_rate, -}; - -static void tegra20_pllx_clk_init(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - if (tegra_sku_id == 7) - c->max_rate = 750000000; -} - -struct clk_ops tegra_pllx_ops = { - .init = tegra20_pllx_clk_init, - .is_enabled = tegra20_pll_clk_is_enabled, - .enable = tegra20_pll_clk_enable, - .disable = tegra20_pll_clk_disable, - .set_rate = tegra20_pll_clk_set_rate, - .recalc_rate = tegra20_pll_clk_recalc_rate, - .round_rate = tegra20_pll_clk_round_rate, -}; - -static int tegra20_plle_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk)); - - mdelay(1); - - val = clk_readl(c->reg + PLL_BASE); - if (!(val & PLLE_MISC_READY)) - return -EBUSY; - - val = clk_readl(c->reg + PLL_BASE); - val |= PLL_BASE_ENABLE | PLL_BASE_BYPASS; - clk_writel(val, c->reg + PLL_BASE); - - return 0; -} - -struct clk_ops tegra_plle_ops = { - .is_enabled = tegra20_pll_clk_is_enabled, - .enable = tegra20_plle_clk_enable, - .set_rate = tegra20_pll_clk_set_rate, - .recalc_rate = tegra20_pll_clk_recalc_rate, - .round_rate = tegra20_pll_clk_round_rate, -}; - -/* Clock divider ops */ -static int tegra20_pll_div_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - - val >>= c->reg_shift; - c->state = (val & PLL_OUT_CLKEN) ? ON : OFF; - if (!(val & PLL_OUT_RESET_DISABLE)) - c->state = OFF; - return c->state; -} - -static unsigned long tegra20_pll_div_clk_recalc_rate(struct clk_hw *hw, - unsigned long prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = prate; - u32 val = clk_readl(c->reg); - u32 divu71; - - val >>= c->reg_shift; - - if (c->flags & DIV_U71) { - divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT; - c->div = (divu71 + 2); - c->mul = 2; - } else if (c->flags & DIV_2) { - c->div = 2; - c->mul = 1; - } else { - c->div = 1; - c->mul = 1; - } - - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - - return rate; -} - -static int tegra20_pll_div_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long flags; - u32 new_val; - u32 val; - - pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk)); - - if (c->flags & DIV_U71) { - spin_lock_irqsave(&clock_register_lock, flags); - val = clk_readl(c->reg); - new_val = val >> c->reg_shift; - new_val &= 0xFFFF; - - new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE; - - val &= ~(0xFFFF << c->reg_shift); - val |= new_val << c->reg_shift; - clk_writel(val, c->reg); - spin_unlock_irqrestore(&clock_register_lock, flags); - return 0; - } else if (c->flags & DIV_2) { - BUG_ON(!(c->flags & PLLD)); - spin_lock_irqsave(&clock_register_lock, flags); - val = clk_readl(c->reg); - val &= ~PLLD_MISC_DIV_RST; - clk_writel(val, c->reg); - spin_unlock_irqrestore(&clock_register_lock, flags); - return 0; - } - return -EINVAL; -} - -static void tegra20_pll_div_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long flags; - u32 new_val; - u32 val; - - pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk)); - - if (c->flags & DIV_U71) { - spin_lock_irqsave(&clock_register_lock, flags); - val = clk_readl(c->reg); - new_val = val >> c->reg_shift; - new_val &= 0xFFFF; - - new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE); - - val &= ~(0xFFFF << c->reg_shift); - val |= new_val << c->reg_shift; - clk_writel(val, c->reg); - spin_unlock_irqrestore(&clock_register_lock, flags); - } else if (c->flags & DIV_2) { - BUG_ON(!(c->flags & PLLD)); - spin_lock_irqsave(&clock_register_lock, flags); - val = clk_readl(c->reg); - val |= PLLD_MISC_DIV_RST; - clk_writel(val, c->reg); - spin_unlock_irqrestore(&clock_register_lock, flags); - } -} - -static int tegra20_pll_div_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long flags; - int divider_u71; - u32 new_val; - u32 val; - - pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate); - - if (c->flags & DIV_U71) { - divider_u71 = clk_div71_get_divider(parent_rate, rate); - if (divider_u71 >= 0) { - spin_lock_irqsave(&clock_register_lock, flags); - val = clk_readl(c->reg); - new_val = val >> c->reg_shift; - new_val &= 0xFFFF; - if (c->flags & DIV_U71_FIXED) - new_val |= PLL_OUT_OVERRIDE; - new_val &= ~PLL_OUT_RATIO_MASK; - new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT; - - val &= ~(0xFFFF << c->reg_shift); - val |= new_val << c->reg_shift; - clk_writel(val, c->reg); - c->div = divider_u71 + 2; - c->mul = 2; - spin_unlock_irqrestore(&clock_register_lock, flags); - return 0; - } - } else if (c->flags & DIV_2) { - if (parent_rate == rate * 2) - return 0; - } - return -EINVAL; -} - -static long tegra20_pll_div_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long parent_rate = *prate; - int divider; - - pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate); - - if (c->flags & DIV_U71) { - divider = clk_div71_get_divider(parent_rate, rate); - if (divider < 0) - return divider; - return DIV_ROUND_UP(parent_rate * 2, divider + 2); - } else if (c->flags & DIV_2) { - return DIV_ROUND_UP(parent_rate, 2); - } - return -EINVAL; -} - -struct clk_ops tegra_pll_div_ops = { - .is_enabled = tegra20_pll_div_clk_is_enabled, - .enable = tegra20_pll_div_clk_enable, - .disable = tegra20_pll_div_clk_disable, - .set_rate = tegra20_pll_div_clk_set_rate, - .round_rate = tegra20_pll_div_clk_round_rate, - .recalc_rate = tegra20_pll_div_clk_recalc_rate, -}; - -/* Periph clk ops */ - -static int tegra20_periph_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - c->state = ON; - - if (!c->u.periph.clk_num) - goto out; - - if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) & - PERIPH_CLK_TO_ENB_BIT(c))) - c->state = OFF; - - if (!(c->flags & PERIPH_NO_RESET)) - if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) & - PERIPH_CLK_TO_ENB_BIT(c)) - c->state = OFF; - -out: - return c->state; -} - -static int tegra20_periph_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long flags; - u32 val; - - pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk)); - - if (!c->u.periph.clk_num) - return 0; - - tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++; - if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1) - return 0; - - spin_lock_irqsave(&clock_register_lock, flags); - - clk_writel(PERIPH_CLK_TO_ENB_BIT(c), - CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c)); - if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET)) - clk_writel(PERIPH_CLK_TO_ENB_BIT(c), - RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c)); - if (c->flags & PERIPH_EMC_ENB) { - /* The EMC peripheral clock has 2 extra enable bits */ - /* FIXME: Do they need to be disabled? */ - val = clk_readl(c->reg); - val |= 0x3 << 24; - clk_writel(val, c->reg); - } - - spin_unlock_irqrestore(&clock_register_lock, flags); - - return 0; -} - -static void tegra20_periph_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long flags; - - pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk)); - - if (!c->u.periph.clk_num) - return; - - tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--; - - if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 0) - return; - - spin_lock_irqsave(&clock_register_lock, flags); - - clk_writel(PERIPH_CLK_TO_ENB_BIT(c), - CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c)); - - spin_unlock_irqrestore(&clock_register_lock, flags); -} - -void tegra2_periph_clk_reset(struct clk_hw *hw, bool assert) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long base = assert ? RST_DEVICES_SET : RST_DEVICES_CLR; - - pr_debug("%s %s on clock %s\n", __func__, - assert ? "assert" : "deassert", __clk_get_name(hw->clk)); - - BUG_ON(!c->u.periph.clk_num); - - if (!(c->flags & PERIPH_NO_RESET)) - clk_writel(PERIPH_CLK_TO_ENB_BIT(c), - base + PERIPH_CLK_TO_ENB_SET_REG(c)); -} - -static int tegra20_periph_clk_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - u32 mask; - u32 shift; - - pr_debug("%s: %s %d\n", __func__, __clk_get_name(hw->clk), index); - - if (c->flags & MUX_PWM) { - shift = PERIPH_CLK_SOURCE_PWM_SHIFT; - mask = PERIPH_CLK_SOURCE_PWM_MASK; - } else { - shift = PERIPH_CLK_SOURCE_SHIFT; - mask = PERIPH_CLK_SOURCE_MASK; - } - - val = clk_readl(c->reg); - val &= ~mask; - val |= (index) << shift; - - clk_writel(val, c->reg); - - return 0; -} - -static u8 tegra20_periph_clk_get_parent(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - u32 mask; - u32 shift; - - if (c->flags & MUX_PWM) { - shift = PERIPH_CLK_SOURCE_PWM_SHIFT; - mask = PERIPH_CLK_SOURCE_PWM_MASK; - } else { - shift = PERIPH_CLK_SOURCE_SHIFT; - mask = PERIPH_CLK_SOURCE_MASK; - } - - if (c->flags & MUX) - return (val & mask) >> shift; - else - return 0; -} - -static unsigned long tegra20_periph_clk_recalc_rate(struct clk_hw *hw, - unsigned long prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long rate = prate; - u32 val = clk_readl(c->reg); - - if (c->flags & DIV_U71) { - u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK; - c->div = divu71 + 2; - c->mul = 2; - } else if (c->flags & DIV_U16) { - u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK; - c->div = divu16 + 1; - c->mul = 1; - } else { - c->div = 1; - c->mul = 1; - return rate; - } - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - - return rate; -} - -static int tegra20_periph_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - int divider; - - val = clk_readl(c->reg); - - if (c->flags & DIV_U71) { - divider = clk_div71_get_divider(parent_rate, rate); - - if (divider >= 0) { - val = clk_readl(c->reg); - val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK; - val |= divider; - clk_writel(val, c->reg); - c->div = divider + 2; - c->mul = 2; - return 0; - } - } else if (c->flags & DIV_U16) { - divider = clk_div16_get_divider(parent_rate, rate); - if (divider >= 0) { - val = clk_readl(c->reg); - val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK; - val |= divider; - clk_writel(val, c->reg); - c->div = divider + 1; - c->mul = 1; - return 0; - } - } else if (parent_rate <= rate) { - c->div = 1; - c->mul = 1; - return 0; - } - - return -EINVAL; -} - -static long tegra20_periph_clk_round_rate(struct clk_hw *hw, - unsigned long rate, unsigned long *prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk)); - int divider; - - pr_debug("%s: %s %lu\n", __func__, __clk_get_name(hw->clk), rate); - - if (prate) - parent_rate = *prate; - - if (c->flags & DIV_U71) { - divider = clk_div71_get_divider(parent_rate, rate); - if (divider < 0) - return divider; - - return DIV_ROUND_UP(parent_rate * 2, divider + 2); - } else if (c->flags & DIV_U16) { - divider = clk_div16_get_divider(parent_rate, rate); - if (divider < 0) - return divider; - return DIV_ROUND_UP(parent_rate, divider + 1); - } - return -EINVAL; -} - -struct clk_ops tegra_periph_clk_ops = { - .is_enabled = tegra20_periph_clk_is_enabled, - .enable = tegra20_periph_clk_enable, - .disable = tegra20_periph_clk_disable, - .set_parent = tegra20_periph_clk_set_parent, - .get_parent = tegra20_periph_clk_get_parent, - .set_rate = tegra20_periph_clk_set_rate, - .round_rate = tegra20_periph_clk_round_rate, - .recalc_rate = tegra20_periph_clk_recalc_rate, -}; - -/* External memory controller clock ops */ -static void tegra20_emc_clk_init(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - c->max_rate = __clk_get_rate(hw->clk); -} - -static long tegra20_emc_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - long emc_rate; - long clk_rate; - - /* - * The slowest entry in the EMC clock table that is at least as - * fast as rate. - */ - emc_rate = tegra_emc_round_rate(rate); - if (emc_rate < 0) - return c->max_rate; - - /* - * The fastest rate the PLL will generate that is at most the - * requested rate. - */ - clk_rate = tegra20_periph_clk_round_rate(hw, emc_rate, NULL); - - /* - * If this fails, and emc_rate > clk_rate, it's because the maximum - * rate in the EMC tables is larger than the maximum rate of the EMC - * clock. The EMC clock's max rate is the rate it was running when the - * kernel booted. Such a mismatch is probably due to using the wrong - * BCT, i.e. using a Tegra20 BCT with an EMC table written for Tegra25. - */ - WARN_ONCE(emc_rate != clk_rate, - "emc_rate %ld != clk_rate %ld", - emc_rate, clk_rate); - - return emc_rate; -} - -static int tegra20_emc_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - int ret; - - /* - * The Tegra2 memory controller has an interlock with the clock - * block that allows memory shadowed registers to be updated, - * and then transfer them to the main registers at the same - * time as the clock update without glitches. - */ - ret = tegra_emc_set_rate(rate); - if (ret < 0) - return ret; - - ret = tegra20_periph_clk_set_rate(hw, rate, parent_rate); - udelay(1); - - return ret; -} - -struct clk_ops tegra_emc_clk_ops = { - .init = tegra20_emc_clk_init, - .is_enabled = tegra20_periph_clk_is_enabled, - .enable = tegra20_periph_clk_enable, - .disable = tegra20_periph_clk_disable, - .set_parent = tegra20_periph_clk_set_parent, - .get_parent = tegra20_periph_clk_get_parent, - .set_rate = tegra20_emc_clk_set_rate, - .round_rate = tegra20_emc_clk_round_rate, - .recalc_rate = tegra20_periph_clk_recalc_rate, -}; - -/* Clock doubler ops */ -static int tegra20_clk_double_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - c->state = ON; - - if (!c->u.periph.clk_num) - goto out; - - if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) & - PERIPH_CLK_TO_ENB_BIT(c))) - c->state = OFF; - -out: - return c->state; -}; - -static unsigned long tegra20_clk_double_recalc_rate(struct clk_hw *hw, - unsigned long prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = prate; - - c->mul = 2; - c->div = 1; - - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - - return rate; -} - -static long tegra20_clk_double_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - unsigned long output_rate = *prate; - - do_div(output_rate, 2); - return output_rate; -} - -static int tegra20_clk_double_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - if (rate != 2 * parent_rate) - return -EINVAL; - return 0; -} - -struct clk_ops tegra_clk_double_ops = { - .is_enabled = tegra20_clk_double_is_enabled, - .enable = tegra20_periph_clk_enable, - .disable = tegra20_periph_clk_disable, - .set_rate = tegra20_clk_double_set_rate, - .recalc_rate = tegra20_clk_double_recalc_rate, - .round_rate = tegra20_clk_double_round_rate, -}; - -/* Audio sync clock ops */ -static int tegra20_audio_sync_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - - c->state = (val & (1<<4)) ? OFF : ON; - return c->state; -} - -static int tegra20_audio_sync_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - clk_writel(0, c->reg); - return 0; -} - -static void tegra20_audio_sync_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - clk_writel(1, c->reg); -} - -static u8 tegra20_audio_sync_clk_get_parent(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - int source; - - source = val & 0xf; - return source; -} - -static int tegra20_audio_sync_clk_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - val = clk_readl(c->reg); - val &= ~0xf; - val |= index; - - clk_writel(val, c->reg); - - return 0; -} - -struct clk_ops tegra_audio_sync_clk_ops = { - .is_enabled = tegra20_audio_sync_clk_is_enabled, - .enable = tegra20_audio_sync_clk_enable, - .disable = tegra20_audio_sync_clk_disable, - .set_parent = tegra20_audio_sync_clk_set_parent, - .get_parent = tegra20_audio_sync_clk_get_parent, -}; - -/* cdev1 and cdev2 (dap_mclk1 and dap_mclk2) ops */ - -static int tegra20_cdev_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - /* We could un-tristate the cdev1 or cdev2 pingroup here; this is - * currently done in the pinmux code. */ - c->state = ON; - - BUG_ON(!c->u.periph.clk_num); - - if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) & - PERIPH_CLK_TO_ENB_BIT(c))) - c->state = OFF; - return c->state; -} - -static int tegra20_cdev_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - BUG_ON(!c->u.periph.clk_num); - - clk_writel(PERIPH_CLK_TO_ENB_BIT(c), - CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c)); - return 0; -} - -static void tegra20_cdev_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - BUG_ON(!c->u.periph.clk_num); - - clk_writel(PERIPH_CLK_TO_ENB_BIT(c), - CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c)); -} - -static unsigned long tegra20_cdev_recalc_rate(struct clk_hw *hw, - unsigned long prate) -{ - return to_clk_tegra(hw)->fixed_rate; -} - -struct clk_ops tegra_cdev_clk_ops = { - .is_enabled = tegra20_cdev_clk_is_enabled, - .enable = tegra20_cdev_clk_enable, - .disable = tegra20_cdev_clk_disable, - .recalc_rate = tegra20_cdev_recalc_rate, -}; - -/* Tegra20 CPU clock and reset control functions */ -static void tegra20_wait_cpu_in_reset(u32 cpu) -{ - unsigned int reg; - - do { - reg = readl(reg_clk_base + - TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET); - cpu_relax(); - } while (!(reg & (1 << cpu))); /* check CPU been reset or not */ - - return; -} - -static void tegra20_put_cpu_in_reset(u32 cpu) -{ - writel(CPU_RESET(cpu), - reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET); - dmb(); -} - -static void tegra20_cpu_out_of_reset(u32 cpu) -{ - writel(CPU_RESET(cpu), - reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR); - wmb(); -} - -static void tegra20_enable_cpu_clock(u32 cpu) -{ - unsigned int reg; - - reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX); - writel(reg & ~CPU_CLOCK(cpu), - reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX); - barrier(); - reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX); -} - -static void tegra20_disable_cpu_clock(u32 cpu) -{ - unsigned int reg; - - reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX); - writel(reg | CPU_CLOCK(cpu), - reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX); -} - -static struct tegra_cpu_car_ops tegra20_cpu_car_ops = { - .wait_for_reset = tegra20_wait_cpu_in_reset, - .put_in_reset = tegra20_put_cpu_in_reset, - .out_of_reset = tegra20_cpu_out_of_reset, - .enable_clock = tegra20_enable_cpu_clock, - .disable_clock = tegra20_disable_cpu_clock, -}; - -void __init tegra20_cpu_car_ops_init(void) -{ - tegra_cpu_car_ops = &tegra20_cpu_car_ops; -} diff --git a/arch/arm/mach-tegra/tegra20_clocks.h b/arch/arm/mach-tegra/tegra20_clocks.h deleted file mode 100644 index 8bfd31b..0000000 --- a/arch/arm/mach-tegra/tegra20_clocks.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __MACH_TEGRA20_CLOCK_H -#define __MACH_TEGRA20_CLOCK_H - -extern struct clk_ops tegra_clk_32k_ops; -extern struct clk_ops tegra_pll_ops; -extern struct clk_ops tegra_clk_m_ops; -extern struct clk_ops tegra_pll_div_ops; -extern struct clk_ops tegra_pllx_ops; -extern struct clk_ops tegra_plle_ops; -extern struct clk_ops tegra_clk_double_ops; -extern struct clk_ops tegra_cdev_clk_ops; -extern struct clk_ops tegra_audio_sync_clk_ops; -extern struct clk_ops tegra_super_ops; -extern struct clk_ops tegra_cpu_ops; -extern struct clk_ops tegra_twd_ops; -extern struct clk_ops tegra_cop_ops; -extern struct clk_ops tegra_bus_ops; -extern struct clk_ops tegra_blink_clk_ops; -extern struct clk_ops tegra_emc_clk_ops; -extern struct clk_ops tegra_periph_clk_ops; -extern struct clk_ops tegra_clk_shared_bus_ops; - -void tegra2_periph_clk_reset(struct clk_hw *hw, bool assert); -void tegra2_cop_clk_reset(struct clk_hw *hw, bool assert); - -#endif diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c deleted file mode 100644 index a23a073..0000000 --- a/arch/arm/mach-tegra/tegra20_clocks_data.c +++ /dev/null @@ -1,1143 +0,0 @@ -/* - * arch/arm/mach-tegra/tegra2_clocks.c - * - * Copyright (C) 2010 Google, Inc. - * Copyright (c) 2012 NVIDIA CORPORATION. All rights reserved. - * - * Author: - * Colin Cross <ccross@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clk-private.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/list.h> -#include <linux/spinlock.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/clk.h> - -#include "clock.h" -#include "fuse.h" -#include "tegra2_emc.h" -#include "tegra20_clocks.h" -#include "tegra_cpu_car.h" - -/* Clock definitions */ - -#define DEFINE_CLK_TEGRA(_name, _rate, _ops, _flags, \ - _parent_names, _parents, _parent) \ - static struct clk tegra_##_name = { \ - .hw = &tegra_##_name##_hw.hw, \ - .name = #_name, \ - .rate = _rate, \ - .ops = _ops, \ - .flags = _flags, \ - .parent_names = _parent_names, \ - .parents = _parents, \ - .num_parents = ARRAY_SIZE(_parent_names), \ - .parent = _parent, \ - }; - -static struct clk tegra_clk_32k; -static struct clk_tegra tegra_clk_32k_hw = { - .hw = { - .clk = &tegra_clk_32k, - }, - .fixed_rate = 32768, -}; - -static struct clk tegra_clk_32k = { - .name = "clk_32k", - .rate = 32768, - .ops = &tegra_clk_32k_ops, - .hw = &tegra_clk_32k_hw.hw, - .flags = CLK_IS_ROOT, -}; - -static struct clk tegra_clk_m; -static struct clk_tegra tegra_clk_m_hw = { - .hw = { - .clk = &tegra_clk_m, - }, - .flags = ENABLE_ON_INIT, - .reg = 0x1fc, - .reg_shift = 28, - .max_rate = 26000000, - .fixed_rate = 0, -}; - -static struct clk tegra_clk_m = { - .name = "clk_m", - .ops = &tegra_clk_m_ops, - .hw = &tegra_clk_m_hw.hw, - .flags = CLK_IS_ROOT, -}; - -#define DEFINE_PLL(_name, _flags, _reg, _max_rate, _input_min, \ - _input_max, _cf_min, _cf_max, _vco_min, \ - _vco_max, _freq_table, _lock_delay, _ops, \ - _fixed_rate, _parent) \ - static const char *tegra_##_name##_parent_names[] = { \ - #_parent, \ - }; \ - static struct clk *tegra_##_name##_parents[] = { \ - &tegra_##_parent, \ - }; \ - static struct clk tegra_##_name; \ - static struct clk_tegra tegra_##_name##_hw = { \ - .hw = { \ - .clk = &tegra_##_name, \ - }, \ - .flags = _flags, \ - .reg = _reg, \ - .max_rate = _max_rate, \ - .u.pll = { \ - .input_min = _input_min, \ - .input_max = _input_max, \ - .cf_min = _cf_min, \ - .cf_max = _cf_max, \ - .vco_min = _vco_min, \ - .vco_max = _vco_max, \ - .freq_table = _freq_table, \ - .lock_delay = _lock_delay, \ - .fixed_rate = _fixed_rate, \ - }, \ - }; \ - static struct clk tegra_##_name = { \ - .name = #_name, \ - .ops = &_ops, \ - .hw = &tegra_##_name##_hw.hw, \ - .parent = &tegra_##_parent, \ - .parent_names = tegra_##_name##_parent_names, \ - .parents = tegra_##_name##_parents, \ - .num_parents = 1, \ - }; - -#define DEFINE_PLL_OUT(_name, _flags, _reg, _reg_shift, \ - _max_rate, _ops, _parent, _clk_flags) \ - static const char *tegra_##_name##_parent_names[] = { \ - #_parent, \ - }; \ - static struct clk *tegra_##_name##_parents[] = { \ - &tegra_##_parent, \ - }; \ - static struct clk tegra_##_name; \ - static struct clk_tegra tegra_##_name##_hw = { \ - .hw = { \ - .clk = &tegra_##_name, \ - }, \ - .flags = _flags, \ - .reg = _reg, \ - .max_rate = _max_rate, \ - .reg_shift = _reg_shift, \ - }; \ - static struct clk tegra_##_name = { \ - .name = #_name, \ - .ops = &tegra_pll_div_ops, \ - .hw = &tegra_##_name##_hw.hw, \ - .parent = &tegra_##_parent, \ - .parent_names = tegra_##_name##_parent_names, \ - .parents = tegra_##_name##_parents, \ - .num_parents = 1, \ - .flags = _clk_flags, \ - }; - - -static struct clk_pll_freq_table tegra_pll_s_freq_table[] = { - {32768, 12000000, 366, 1, 1, 0}, - {32768, 13000000, 397, 1, 1, 0}, - {32768, 19200000, 586, 1, 1, 0}, - {32768, 26000000, 793, 1, 1, 0}, - {0, 0, 0, 0, 0, 0}, -}; - -DEFINE_PLL(pll_s, PLL_ALT_MISC_REG, 0xf0, 26000000, 32768, 32768, 0, - 0, 12000000, 26000000, tegra_pll_s_freq_table, 300, - tegra_pll_ops, 0, clk_32k); - -static struct clk_pll_freq_table tegra_pll_c_freq_table[] = { - { 12000000, 600000000, 600, 12, 1, 8 }, - { 13000000, 600000000, 600, 13, 1, 8 }, - { 19200000, 600000000, 500, 16, 1, 6 }, - { 26000000, 600000000, 600, 26, 1, 8 }, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_c, PLL_HAS_CPCON, 0x80, 600000000, 2000000, 31000000, 1000000, - 6000000, 20000000, 1400000000, tegra_pll_c_freq_table, 300, - tegra_pll_ops, 0, clk_m); - -DEFINE_PLL_OUT(pll_c_out1, DIV_U71, 0x84, 0, 600000000, - tegra_pll_div_ops, pll_c, 0); - -static struct clk_pll_freq_table tegra_pll_m_freq_table[] = { - { 12000000, 666000000, 666, 12, 1, 8}, - { 13000000, 666000000, 666, 13, 1, 8}, - { 19200000, 666000000, 555, 16, 1, 8}, - { 26000000, 666000000, 666, 26, 1, 8}, - { 12000000, 600000000, 600, 12, 1, 8}, - { 13000000, 600000000, 600, 13, 1, 8}, - { 19200000, 600000000, 375, 12, 1, 6}, - { 26000000, 600000000, 600, 26, 1, 8}, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_m, PLL_HAS_CPCON, 0x90, 800000000, 2000000, 31000000, 1000000, - 6000000, 20000000, 1200000000, tegra_pll_m_freq_table, 300, - tegra_pll_ops, 0, clk_m); - -DEFINE_PLL_OUT(pll_m_out1, DIV_U71, 0x94, 0, 600000000, - tegra_pll_div_ops, pll_m, 0); - -static struct clk_pll_freq_table tegra_pll_p_freq_table[] = { - { 12000000, 216000000, 432, 12, 2, 8}, - { 13000000, 216000000, 432, 13, 2, 8}, - { 19200000, 216000000, 90, 4, 2, 1}, - { 26000000, 216000000, 432, 26, 2, 8}, - { 12000000, 432000000, 432, 12, 1, 8}, - { 13000000, 432000000, 432, 13, 1, 8}, - { 19200000, 432000000, 90, 4, 1, 1}, - { 26000000, 432000000, 432, 26, 1, 8}, - { 0, 0, 0, 0, 0, 0 }, -}; - - -DEFINE_PLL(pll_p, ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON, 0xa0, 432000000, - 2000000, 31000000, 1000000, 6000000, 20000000, 1400000000, - tegra_pll_p_freq_table, 300, tegra_pll_ops, 216000000, clk_m); - -DEFINE_PLL_OUT(pll_p_out1, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4, 0, - 432000000, tegra_pll_div_ops, pll_p, 0); -DEFINE_PLL_OUT(pll_p_out2, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4, 16, - 432000000, tegra_pll_div_ops, pll_p, 0); -DEFINE_PLL_OUT(pll_p_out3, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8, 0, - 432000000, tegra_pll_div_ops, pll_p, 0); -DEFINE_PLL_OUT(pll_p_out4, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8, 16, - 432000000, tegra_pll_div_ops, pll_p, 0); - -static struct clk_pll_freq_table tegra_pll_a_freq_table[] = { - { 28800000, 56448000, 49, 25, 1, 1}, - { 28800000, 73728000, 64, 25, 1, 1}, - { 28800000, 24000000, 5, 6, 1, 1}, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_a, PLL_HAS_CPCON, 0xb0, 73728000, 2000000, 31000000, 1000000, - 6000000, 20000000, 1400000000, tegra_pll_a_freq_table, 300, - tegra_pll_ops, 0, pll_p_out1); - -DEFINE_PLL_OUT(pll_a_out0, DIV_U71, 0xb4, 0, 73728000, - tegra_pll_div_ops, pll_a, 0); - -static struct clk_pll_freq_table tegra_pll_d_freq_table[] = { - { 12000000, 216000000, 216, 12, 1, 4}, - { 13000000, 216000000, 216, 13, 1, 4}, - { 19200000, 216000000, 135, 12, 1, 3}, - { 26000000, 216000000, 216, 26, 1, 4}, - - { 12000000, 297000000, 99, 4, 1, 4 }, - { 12000000, 339000000, 113, 4, 1, 4 }, - - { 12000000, 594000000, 594, 12, 1, 8}, - { 13000000, 594000000, 594, 13, 1, 8}, - { 19200000, 594000000, 495, 16, 1, 8}, - { 26000000, 594000000, 594, 26, 1, 8}, - - { 12000000, 616000000, 616, 12, 1, 8}, - - { 12000000, 1000000000, 1000, 12, 1, 12}, - { 13000000, 1000000000, 1000, 13, 1, 12}, - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 12}, - - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_d, PLL_HAS_CPCON | PLLD, 0xd0, 1000000000, 2000000, 40000000, - 1000000, 6000000, 40000000, 1000000000, tegra_pll_d_freq_table, - 1000, tegra_pll_ops, 0, clk_m); - -DEFINE_PLL_OUT(pll_d_out0, DIV_2 | PLLD, 0, 0, 500000000, - tegra_pll_div_ops, pll_d, CLK_SET_RATE_PARENT); - -static struct clk_pll_freq_table tegra_pll_u_freq_table[] = { - { 12000000, 480000000, 960, 12, 2, 0}, - { 13000000, 480000000, 960, 13, 2, 0}, - { 19200000, 480000000, 200, 4, 2, 0}, - { 26000000, 480000000, 960, 26, 2, 0}, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_u, PLLU, 0xc0, 480000000, 2000000, 40000000, 1000000, 6000000, - 48000000, 960000000, tegra_pll_u_freq_table, 1000, - tegra_pll_ops, 0, clk_m); - -static struct clk_pll_freq_table tegra_pll_x_freq_table[] = { - /* 1 GHz */ - { 12000000, 1000000000, 1000, 12, 1, 12}, - { 13000000, 1000000000, 1000, 13, 1, 12}, - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 12}, - - /* 912 MHz */ - { 12000000, 912000000, 912, 12, 1, 12}, - { 13000000, 912000000, 912, 13, 1, 12}, - { 19200000, 912000000, 760, 16, 1, 8}, - { 26000000, 912000000, 912, 26, 1, 12}, - - /* 816 MHz */ - { 12000000, 816000000, 816, 12, 1, 12}, - { 13000000, 816000000, 816, 13, 1, 12}, - { 19200000, 816000000, 680, 16, 1, 8}, - { 26000000, 816000000, 816, 26, 1, 12}, - - /* 760 MHz */ - { 12000000, 760000000, 760, 12, 1, 12}, - { 13000000, 760000000, 760, 13, 1, 12}, - { 19200000, 760000000, 950, 24, 1, 8}, - { 26000000, 760000000, 760, 26, 1, 12}, - - /* 750 MHz */ - { 12000000, 750000000, 750, 12, 1, 12}, - { 13000000, 750000000, 750, 13, 1, 12}, - { 19200000, 750000000, 625, 16, 1, 8}, - { 26000000, 750000000, 750, 26, 1, 12}, - - /* 608 MHz */ - { 12000000, 608000000, 608, 12, 1, 12}, - { 13000000, 608000000, 608, 13, 1, 12}, - { 19200000, 608000000, 380, 12, 1, 8}, - { 26000000, 608000000, 608, 26, 1, 12}, - - /* 456 MHz */ - { 12000000, 456000000, 456, 12, 1, 12}, - { 13000000, 456000000, 456, 13, 1, 12}, - { 19200000, 456000000, 380, 16, 1, 8}, - { 26000000, 456000000, 456, 26, 1, 12}, - - /* 312 MHz */ - { 12000000, 312000000, 312, 12, 1, 12}, - { 13000000, 312000000, 312, 13, 1, 12}, - { 19200000, 312000000, 260, 16, 1, 8}, - { 26000000, 312000000, 312, 26, 1, 12}, - - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_x, PLL_HAS_CPCON | PLL_ALT_MISC_REG, 0xe0, 1000000000, 2000000, - 31000000, 1000000, 6000000, 20000000, 1200000000, - tegra_pll_x_freq_table, 300, tegra_pllx_ops, 0, clk_m); - -static struct clk_pll_freq_table tegra_pll_e_freq_table[] = { - { 12000000, 100000000, 200, 24, 1, 0 }, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_e, PLL_ALT_MISC_REG, 0xe8, 100000000, 12000000, 12000000, 0, 0, - 0, 0, tegra_pll_e_freq_table, 0, tegra_plle_ops, 0, clk_m); - -static const char *tegra_common_parent_names[] = { - "clk_m", -}; - -static struct clk *tegra_common_parents[] = { - &tegra_clk_m, -}; - -static struct clk tegra_clk_d; -static struct clk_tegra tegra_clk_d_hw = { - .hw = { - .clk = &tegra_clk_d, - }, - .flags = PERIPH_NO_RESET, - .reg = 0x34, - .reg_shift = 12, - .max_rate = 52000000, - .u.periph = { - .clk_num = 90, - }, -}; - -static struct clk tegra_clk_d = { - .name = "clk_d", - .hw = &tegra_clk_d_hw.hw, - .ops = &tegra_clk_double_ops, - .parent = &tegra_clk_m, - .parent_names = tegra_common_parent_names, - .parents = tegra_common_parents, - .num_parents = ARRAY_SIZE(tegra_common_parent_names), -}; - -static struct clk tegra_cdev1; -static struct clk_tegra tegra_cdev1_hw = { - .hw = { - .clk = &tegra_cdev1, - }, - .fixed_rate = 26000000, - .u.periph = { - .clk_num = 94, - }, -}; -static struct clk tegra_cdev1 = { - .name = "cdev1", - .hw = &tegra_cdev1_hw.hw, - .ops = &tegra_cdev_clk_ops, - .flags = CLK_IS_ROOT, -}; - -/* dap_mclk2, belongs to the cdev2 pingroup. */ -static struct clk tegra_cdev2; -static struct clk_tegra tegra_cdev2_hw = { - .hw = { - .clk = &tegra_cdev2, - }, - .fixed_rate = 26000000, - .u.periph = { - .clk_num = 93, - }, -}; -static struct clk tegra_cdev2 = { - .name = "cdev2", - .hw = &tegra_cdev2_hw.hw, - .ops = &tegra_cdev_clk_ops, - .flags = CLK_IS_ROOT, -}; - -/* initialized before peripheral clocks */ -static struct clk_mux_sel mux_audio_sync_clk[8+1]; -static const struct audio_sources { - const char *name; - int value; -} mux_audio_sync_clk_sources[] = { - { .name = "spdif_in", .value = 0 }, - { .name = "i2s1", .value = 1 }, - { .name = "i2s2", .value = 2 }, - { .name = "pll_a_out0", .value = 4 }, -#if 0 /* FIXME: not implemented */ - { .name = "ac97", .value = 3 }, - { .name = "ext_audio_clk2", .value = 5 }, - { .name = "ext_audio_clk1", .value = 6 }, - { .name = "ext_vimclk", .value = 7 }, -#endif - { NULL, 0 } -}; - -static const char *audio_parent_names[] = { - "spdif_in", - "i2s1", - "i2s2", - "dummy", - "pll_a_out0", - "dummy", - "dummy", - "dummy", -}; - -static struct clk *audio_parents[] = { - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, -}; - -static struct clk tegra_audio; -static struct clk_tegra tegra_audio_hw = { - .hw = { - .clk = &tegra_audio, - }, - .reg = 0x38, - .max_rate = 73728000, -}; -DEFINE_CLK_TEGRA(audio, 0, &tegra_audio_sync_clk_ops, 0, audio_parent_names, - audio_parents, NULL); - -static const char *audio_2x_parent_names[] = { - "audio", -}; - -static struct clk *audio_2x_parents[] = { - &tegra_audio, -}; - -static struct clk tegra_audio_2x; -static struct clk_tegra tegra_audio_2x_hw = { - .hw = { - .clk = &tegra_audio_2x, - }, - .flags = PERIPH_NO_RESET, - .max_rate = 48000000, - .reg = 0x34, - .reg_shift = 8, - .u.periph = { - .clk_num = 89, - }, -}; -DEFINE_CLK_TEGRA(audio_2x, 0, &tegra_clk_double_ops, 0, audio_2x_parent_names, - audio_2x_parents, &tegra_audio); - -static struct clk_lookup tegra_audio_clk_lookups[] = { - { .con_id = "audio", .clk = &tegra_audio }, - { .con_id = "audio_2x", .clk = &tegra_audio_2x } -}; - -/* This is called after peripheral clocks are initialized, as the - * audio_sync clock depends on some of the peripheral clocks. - */ - -static void init_audio_sync_clock_mux(void) -{ - int i; - struct clk_mux_sel *sel = mux_audio_sync_clk; - const struct audio_sources *src = mux_audio_sync_clk_sources; - struct clk_lookup *lookup; - - for (i = 0; src->name; i++, sel++, src++) { - sel->input = tegra_get_clock_by_name(src->name); - if (!sel->input) - pr_err("%s: could not find clk %s\n", __func__, - src->name); - audio_parents[src->value] = sel->input; - sel->value = src->value; - } - - lookup = tegra_audio_clk_lookups; - for (i = 0; i < ARRAY_SIZE(tegra_audio_clk_lookups); i++, lookup++) { - struct clk *c = lookup->clk; - struct clk_tegra *clk = to_clk_tegra(c->hw); - __clk_init(NULL, c); - INIT_LIST_HEAD(&clk->shared_bus_list); - clk->lookup.con_id = lookup->con_id; - clk->lookup.clk = c; - clkdev_add(&clk->lookup); - tegra_clk_add(c); - } -} - -static const char *mux_cclk[] = { - "clk_m", - "pll_c", - "clk_32k", - "pll_m", - "pll_p", - "pll_p_out4", - "pll_p_out3", - "clk_d", - "pll_x", -}; - - -static struct clk *mux_cclk_p[] = { - &tegra_clk_m, - &tegra_pll_c, - &tegra_clk_32k, - &tegra_pll_m, - &tegra_pll_p, - &tegra_pll_p_out4, - &tegra_pll_p_out3, - &tegra_clk_d, - &tegra_pll_x, -}; - -static const char *mux_sclk[] = { - "clk_m", - "pll_c_out1", - "pll_p_out4", - "pllp_p_out3", - "pll_p_out2", - "clk_d", - "clk_32k", - "pll_m_out1", -}; - -static struct clk *mux_sclk_p[] = { - &tegra_clk_m, - &tegra_pll_c_out1, - &tegra_pll_p_out4, - &tegra_pll_p_out3, - &tegra_pll_p_out2, - &tegra_clk_d, - &tegra_clk_32k, - &tegra_pll_m_out1, -}; - -static struct clk tegra_cclk; -static struct clk_tegra tegra_cclk_hw = { - .hw = { - .clk = &tegra_cclk, - }, - .reg = 0x20, - .max_rate = 1000000000, -}; -DEFINE_CLK_TEGRA(cclk, 0, &tegra_super_ops, 0, mux_cclk, - mux_cclk_p, NULL); - -static const char *mux_twd[] = { - "cclk", -}; - -static struct clk *mux_twd_p[] = { - &tegra_cclk, -}; - -static struct clk tegra_clk_twd; -static struct clk_tegra tegra_clk_twd_hw = { - .hw = { - .clk = &tegra_clk_twd, - }, - .max_rate = 1000000000, - .mul = 1, - .div = 4, -}; - -static struct clk tegra_clk_twd = { - .name = "twd", - .ops = &tegra_twd_ops, - .hw = &tegra_clk_twd_hw.hw, - .parent = &tegra_cclk, - .parent_names = mux_twd, - .parents = mux_twd_p, - .num_parents = ARRAY_SIZE(mux_twd), -}; - -static struct clk tegra_sclk; -static struct clk_tegra tegra_sclk_hw = { - .hw = { - .clk = &tegra_sclk, - }, - .reg = 0x28, - .max_rate = 240000000, - .min_rate = 120000000, -}; -DEFINE_CLK_TEGRA(sclk, 0, &tegra_super_ops, 0, mux_sclk, - mux_sclk_p, NULL); - -static const char *tegra_cop_parent_names[] = { - "tegra_sclk", -}; - -static struct clk *tegra_cop_parents[] = { - &tegra_sclk, -}; - -static struct clk tegra_cop; -static struct clk_tegra tegra_cop_hw = { - .hw = { - .clk = &tegra_cop, - }, - .max_rate = 240000000, - .reset = &tegra2_cop_clk_reset, -}; -DEFINE_CLK_TEGRA(cop, 0, &tegra_cop_ops, CLK_SET_RATE_PARENT, - tegra_cop_parent_names, tegra_cop_parents, &tegra_sclk); - -static const char *tegra_hclk_parent_names[] = { - "tegra_sclk", -}; - -static struct clk *tegra_hclk_parents[] = { - &tegra_sclk, -}; - -static struct clk tegra_hclk; -static struct clk_tegra tegra_hclk_hw = { - .hw = { - .clk = &tegra_hclk, - }, - .flags = DIV_BUS, - .reg = 0x30, - .reg_shift = 4, - .max_rate = 240000000, -}; -DEFINE_CLK_TEGRA(hclk, 0, &tegra_bus_ops, 0, tegra_hclk_parent_names, - tegra_hclk_parents, &tegra_sclk); - -static const char *tegra_pclk_parent_names[] = { - "tegra_hclk", -}; - -static struct clk *tegra_pclk_parents[] = { - &tegra_hclk, -}; - -static struct clk tegra_pclk; -static struct clk_tegra tegra_pclk_hw = { - .hw = { - .clk = &tegra_pclk, - }, - .flags = DIV_BUS, - .reg = 0x30, - .reg_shift = 0, - .max_rate = 120000000, -}; -DEFINE_CLK_TEGRA(pclk, 0, &tegra_bus_ops, 0, tegra_pclk_parent_names, - tegra_pclk_parents, &tegra_hclk); - -static const char *tegra_blink_parent_names[] = { - "clk_32k", -}; - -static struct clk *tegra_blink_parents[] = { - &tegra_clk_32k, -}; - -static struct clk tegra_blink; -static struct clk_tegra tegra_blink_hw = { - .hw = { - .clk = &tegra_blink, - }, - .reg = 0x40, - .max_rate = 32768, -}; -DEFINE_CLK_TEGRA(blink, 0, &tegra_blink_clk_ops, 0, tegra_blink_parent_names, - tegra_blink_parents, &tegra_clk_32k); - -static const char *mux_pllm_pllc_pllp_plla[] = { - "pll_m", - "pll_c", - "pll_p", - "pll_a_out0", -}; - -static struct clk *mux_pllm_pllc_pllp_plla_p[] = { - &tegra_pll_m, - &tegra_pll_c, - &tegra_pll_p, - &tegra_pll_a_out0, -}; - -static const char *mux_pllm_pllc_pllp_clkm[] = { - "pll_m", - "pll_c", - "pll_p", - "clk_m", -}; - -static struct clk *mux_pllm_pllc_pllp_clkm_p[] = { - &tegra_pll_m, - &tegra_pll_c, - &tegra_pll_p, - &tegra_clk_m, -}; - -static const char *mux_pllp_pllc_pllm_clkm[] = { - "pll_p", - "pll_c", - "pll_m", - "clk_m", -}; - -static struct clk *mux_pllp_pllc_pllm_clkm_p[] = { - &tegra_pll_p, - &tegra_pll_c, - &tegra_pll_m, - &tegra_clk_m, -}; - -static const char *mux_pllaout0_audio2x_pllp_clkm[] = { - "pll_a_out0", - "audio_2x", - "pll_p", - "clk_m", -}; - -static struct clk *mux_pllaout0_audio2x_pllp_clkm_p[] = { - &tegra_pll_a_out0, - &tegra_audio_2x, - &tegra_pll_p, - &tegra_clk_m, -}; - -static const char *mux_pllp_plld_pllc_clkm[] = { - "pllp", - "pll_d_out0", - "pll_c", - "clk_m", -}; - -static struct clk *mux_pllp_plld_pllc_clkm_p[] = { - &tegra_pll_p, - &tegra_pll_d_out0, - &tegra_pll_c, - &tegra_clk_m, -}; - -static const char *mux_pllp_pllc_audio_clkm_clk32[] = { - "pll_p", - "pll_c", - "audio", - "clk_m", - "clk_32k", -}; - -static struct clk *mux_pllp_pllc_audio_clkm_clk32_p[] = { - &tegra_pll_p, - &tegra_pll_c, - &tegra_audio, - &tegra_clk_m, - &tegra_clk_32k, -}; - -static const char *mux_pllp_pllc_pllm[] = { - "pll_p", - "pll_c", - "pll_m" -}; - -static struct clk *mux_pllp_pllc_pllm_p[] = { - &tegra_pll_p, - &tegra_pll_c, - &tegra_pll_m, -}; - -static const char *mux_clk_m[] = { - "clk_m", -}; - -static struct clk *mux_clk_m_p[] = { - &tegra_clk_m, -}; - -static const char *mux_pllp_out3[] = { - "pll_p_out3", -}; - -static struct clk *mux_pllp_out3_p[] = { - &tegra_pll_p_out3, -}; - -static const char *mux_plld[] = { - "pll_d", -}; - -static struct clk *mux_plld_p[] = { - &tegra_pll_d, -}; - -static const char *mux_clk_32k[] = { - "clk_32k", -}; - -static struct clk *mux_clk_32k_p[] = { - &tegra_clk_32k, -}; - -static const char *mux_pclk[] = { - "pclk", -}; - -static struct clk *mux_pclk_p[] = { - &tegra_pclk, -}; - -static struct clk tegra_emc; -static struct clk_tegra tegra_emc_hw = { - .hw = { - .clk = &tegra_emc, - }, - .reg = 0x19c, - .max_rate = 800000000, - .flags = MUX | DIV_U71 | PERIPH_EMC_ENB, - .reset = &tegra2_periph_clk_reset, - .u.periph = { - .clk_num = 57, - }, -}; -DEFINE_CLK_TEGRA(emc, 0, &tegra_emc_clk_ops, 0, mux_pllm_pllc_pllp_clkm, - mux_pllm_pllc_pllp_clkm_p, NULL); - -#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, \ - _max, _inputs, _flags) \ - static struct clk tegra_##_name; \ - static struct clk_tegra tegra_##_name##_hw = { \ - .hw = { \ - .clk = &tegra_##_name, \ - }, \ - .lookup = { \ - .dev_id = _dev, \ - .con_id = _con, \ - }, \ - .reg = _reg, \ - .flags = _flags, \ - .max_rate = _max, \ - .u.periph = { \ - .clk_num = _clk_num, \ - }, \ - .reset = tegra2_periph_clk_reset, \ - }; \ - static struct clk tegra_##_name = { \ - .name = #_name, \ - .ops = &tegra_periph_clk_ops, \ - .hw = &tegra_##_name##_hw.hw, \ - .parent_names = _inputs, \ - .parents = _inputs##_p, \ - .num_parents = ARRAY_SIZE(_inputs), \ - }; - -PERIPH_CLK(apbdma, "tegra-apbdma", NULL, 34, 0, 108000000, mux_pclk, 0); -PERIPH_CLK(rtc, "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET); -PERIPH_CLK(timer, "timer", NULL, 5, 0, 26000000, mux_clk_m, 0); -PERIPH_CLK(i2s1, "tegra20-i2s.0", NULL, 11, 0x100, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71); -PERIPH_CLK(i2s2, "tegra20-i2s.1", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71); -PERIPH_CLK(spdif_out, "spdif_out", NULL, 10, 0x108, 100000000, mux_pllaout0_audio2x_pllp_clkm, MUX | DIV_U71); -PERIPH_CLK(spdif_in, "spdif_in", NULL, 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71); -PERIPH_CLK(pwm, "tegra-pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_audio_clkm_clk32, MUX | DIV_U71 | MUX_PWM); -PERIPH_CLK(spi, "spi", NULL, 43, 0x114, 40000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(xio, "xio", NULL, 45, 0x120, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(twc, "twc", NULL, 16, 0x12c, 150000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(sbc1, "spi_tegra.0", NULL, 41, 0x134, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(sbc2, "spi_tegra.1", NULL, 44, 0x118, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(sbc3, "spi_tegra.2", NULL, 46, 0x11c, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(sbc4, "spi_tegra.3", NULL, 68, 0x1b4, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(ide, "ide", NULL, 25, 0x144, 100000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* requires min voltage */ -PERIPH_CLK(ndflash, "tegra_nand", NULL, 13, 0x160, 164000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */ -PERIPH_CLK(vfir, "vfir", NULL, 7, 0x168, 72000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(sdmmc1, "sdhci-tegra.0", NULL, 14, 0x150, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */ -PERIPH_CLK(sdmmc2, "sdhci-tegra.1", NULL, 9, 0x154, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */ -PERIPH_CLK(sdmmc3, "sdhci-tegra.2", NULL, 69, 0x1bc, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */ -PERIPH_CLK(sdmmc4, "sdhci-tegra.3", NULL, 15, 0x164, 52000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */ -PERIPH_CLK(vcp, "tegra-avp", "vcp", 29, 0, 250000000, mux_clk_m, 0); -PERIPH_CLK(bsea, "tegra-avp", "bsea", 62, 0, 250000000, mux_clk_m, 0); -PERIPH_CLK(bsev, "tegra-aes", "bsev", 63, 0, 250000000, mux_clk_m, 0); -PERIPH_CLK(vde, "tegra-avp", "vde", 61, 0x1c8, 250000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage and process_id */ -PERIPH_CLK(csite, "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* max rate ??? */ -/* FIXME: what is la? */ -PERIPH_CLK(la, "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(owr, "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(nor, "nor", NULL, 42, 0x1d0, 92000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* requires min voltage */ -PERIPH_CLK(mipi, "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */ -PERIPH_CLK(i2c1, "tegra-i2c.0", "div-clk", 12, 0x124, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16); -PERIPH_CLK(i2c2, "tegra-i2c.1", "div-clk", 54, 0x198, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16); -PERIPH_CLK(i2c3, "tegra-i2c.2", "div-clk", 67, 0x1b8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16); -PERIPH_CLK(dvc, "tegra-i2c.3", "div-clk", 47, 0x128, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16); -PERIPH_CLK(uarta, "tegra-uart.0", NULL, 6, 0x178, 600000000, mux_pllp_pllc_pllm_clkm, MUX); -PERIPH_CLK(uartb, "tegra-uart.1", NULL, 7, 0x17c, 600000000, mux_pllp_pllc_pllm_clkm, MUX); -PERIPH_CLK(uartc, "tegra-uart.2", NULL, 55, 0x1a0, 600000000, mux_pllp_pllc_pllm_clkm, MUX); -PERIPH_CLK(uartd, "tegra-uart.3", NULL, 65, 0x1c0, 600000000, mux_pllp_pllc_pllm_clkm, MUX); -PERIPH_CLK(uarte, "tegra-uart.4", NULL, 66, 0x1c4, 600000000, mux_pllp_pllc_pllm_clkm, MUX); -PERIPH_CLK(3d, "3d", NULL, 24, 0x158, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET); /* scales with voltage and process_id */ -PERIPH_CLK(2d, "2d", NULL, 21, 0x15c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */ -PERIPH_CLK(vi, "tegra_camera", "vi", 20, 0x148, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */ -PERIPH_CLK(vi_sensor, "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET); /* scales with voltage and process_id */ -PERIPH_CLK(epp, "epp", NULL, 19, 0x16c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */ -PERIPH_CLK(mpe, "mpe", NULL, 60, 0x170, 250000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */ -PERIPH_CLK(host1x, "host1x", NULL, 28, 0x180, 166000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */ -PERIPH_CLK(cve, "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */ -PERIPH_CLK(tvo, "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */ -PERIPH_CLK(hdmi, "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */ -PERIPH_CLK(tvdac, "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */ -PERIPH_CLK(disp1, "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX); /* scales with voltage and process_id */ -PERIPH_CLK(disp2, "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX); /* scales with voltage and process_id */ -PERIPH_CLK(usbd, "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0); /* requires min voltage */ -PERIPH_CLK(usb2, "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0); /* requires min voltage */ -PERIPH_CLK(usb3, "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0); /* requires min voltage */ -PERIPH_CLK(dsi, "dsi", NULL, 48, 0, 500000000, mux_plld, 0); /* scales with voltage */ -PERIPH_CLK(csi, "tegra_camera", "csi", 52, 0, 72000000, mux_pllp_out3, 0); -PERIPH_CLK(isp, "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0); /* same frequency as VI */ -PERIPH_CLK(csus, "tegra_camera", "csus", 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET); -PERIPH_CLK(pex, NULL, "pex", 70, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET); -PERIPH_CLK(afi, NULL, "afi", 72, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET); -PERIPH_CLK(pcie_xclk, NULL, "pcie_xclk", 74, 0, 26000000, mux_clk_m, PERIPH_MANUAL_RESET); - -static struct clk *tegra_list_clks[] = { - &tegra_apbdma, - &tegra_rtc, - &tegra_timer, - &tegra_i2s1, - &tegra_i2s2, - &tegra_spdif_out, - &tegra_spdif_in, - &tegra_pwm, - &tegra_spi, - &tegra_xio, - &tegra_twc, - &tegra_sbc1, - &tegra_sbc2, - &tegra_sbc3, - &tegra_sbc4, - &tegra_ide, - &tegra_ndflash, - &tegra_vfir, - &tegra_sdmmc1, - &tegra_sdmmc2, - &tegra_sdmmc3, - &tegra_sdmmc4, - &tegra_vcp, - &tegra_bsea, - &tegra_bsev, - &tegra_vde, - &tegra_csite, - &tegra_la, - &tegra_owr, - &tegra_nor, - &tegra_mipi, - &tegra_i2c1, - &tegra_i2c2, - &tegra_i2c3, - &tegra_dvc, - &tegra_uarta, - &tegra_uartb, - &tegra_uartc, - &tegra_uartd, - &tegra_uarte, - &tegra_3d, - &tegra_2d, - &tegra_vi, - &tegra_vi_sensor, - &tegra_epp, - &tegra_mpe, - &tegra_host1x, - &tegra_cve, - &tegra_tvo, - &tegra_hdmi, - &tegra_tvdac, - &tegra_disp1, - &tegra_disp2, - &tegra_usbd, - &tegra_usb2, - &tegra_usb3, - &tegra_dsi, - &tegra_csi, - &tegra_isp, - &tegra_csus, - &tegra_pex, - &tegra_afi, - &tegra_pcie_xclk, -}; - -#define CLK_DUPLICATE(_name, _dev, _con) \ - { \ - .name = _name, \ - .lookup = { \ - .dev_id = _dev, \ - .con_id = _con, \ - }, \ - } - -/* Some clocks may be used by different drivers depending on the board - * configuration. List those here to register them twice in the clock lookup - * table under two names. - */ -static struct clk_duplicate tegra_clk_duplicates[] = { - CLK_DUPLICATE("uarta", "serial8250.0", NULL), - CLK_DUPLICATE("uartb", "serial8250.1", NULL), - CLK_DUPLICATE("uartc", "serial8250.2", NULL), - CLK_DUPLICATE("uartd", "serial8250.3", NULL), - CLK_DUPLICATE("uarte", "serial8250.4", NULL), - CLK_DUPLICATE("usbd", "utmip-pad", NULL), - CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), - CLK_DUPLICATE("usbd", "tegra-otg", NULL), - CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"), - CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"), - CLK_DUPLICATE("epp", "tegra_grhost", "epp"), - CLK_DUPLICATE("mpe", "tegra_grhost", "mpe"), - CLK_DUPLICATE("cop", "tegra-avp", "cop"), - CLK_DUPLICATE("vde", "tegra-aes", "vde"), - CLK_DUPLICATE("cclk", NULL, "cpu"), - CLK_DUPLICATE("twd", "smp_twd", NULL), - CLK_DUPLICATE("pll_p_out3", "tegra-i2c.0", "fast-clk"), - CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"), - CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"), - CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"), - CLK_DUPLICATE("pll_p", "tegradc.0", "parent"), - CLK_DUPLICATE("pll_p", "tegradc.1", "parent"), - CLK_DUPLICATE("pll_d_out0", "hdmi", "parent"), -}; - -#define CLK(dev, con, ck) \ - { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - } - -static struct clk *tegra_ptr_clks[] = { - &tegra_clk_32k, - &tegra_pll_s, - &tegra_clk_m, - &tegra_pll_m, - &tegra_pll_m_out1, - &tegra_pll_c, - &tegra_pll_c_out1, - &tegra_pll_p, - &tegra_pll_p_out1, - &tegra_pll_p_out2, - &tegra_pll_p_out3, - &tegra_pll_p_out4, - &tegra_pll_a, - &tegra_pll_a_out0, - &tegra_pll_d, - &tegra_pll_d_out0, - &tegra_pll_u, - &tegra_pll_x, - &tegra_pll_e, - &tegra_cclk, - &tegra_clk_twd, - &tegra_sclk, - &tegra_hclk, - &tegra_pclk, - &tegra_clk_d, - &tegra_cdev1, - &tegra_cdev2, - &tegra_blink, - &tegra_cop, - &tegra_emc, -}; - -static void tegra2_init_one_clock(struct clk *c) -{ - struct clk_tegra *clk = to_clk_tegra(c->hw); - int ret; - - ret = __clk_init(NULL, c); - if (ret) - pr_err("clk init failed %s\n", __clk_get_name(c)); - - INIT_LIST_HEAD(&clk->shared_bus_list); - if (!clk->lookup.dev_id && !clk->lookup.con_id) - clk->lookup.con_id = c->name; - clk->lookup.clk = c; - clkdev_add(&clk->lookup); - tegra_clk_add(c); -} - -void __init tegra2_init_clocks(void) -{ - int i; - struct clk *c; - - for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++) - tegra2_init_one_clock(tegra_ptr_clks[i]); - - for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++) - tegra2_init_one_clock(tegra_list_clks[i]); - - for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) { - c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name); - if (!c) { - pr_err("%s: Unknown duplicate clock %s\n", __func__, - tegra_clk_duplicates[i].name); - continue; - } - - tegra_clk_duplicates[i].lookup.clk = c; - clkdev_add(&tegra_clk_duplicates[i].lookup); - } - - init_audio_sync_clock_mux(); - tegra20_cpu_car_ops_init(); -} diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index e18aa2f..ce7ce42 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -312,11 +312,9 @@ static int tegra_emc_probe(struct platform_device *pdev) return -ENOMEM; } - emc_regbase = devm_request_and_ioremap(&pdev->dev, res); - if (!emc_regbase) { - dev_err(&pdev->dev, "failed to remap registers\n"); - return -ENOMEM; - } + emc_regbase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(emc_regbase)) + return PTR_ERR(emc_regbase); pdata = pdev->dev.platform_data; diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c deleted file mode 100644 index d714777..0000000 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ /dev/null @@ -1,2506 +0,0 @@ -/* - * arch/arm/mach-tegra/tegra30_clocks.c - * - * Copyright (c) 2010-2012 NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/list.h> -#include <linux/spinlock.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/cpufreq.h> -#include <linux/syscore_ops.h> - -#include <asm/clkdev.h> - -#include <mach/powergate.h> - -#include "clock.h" -#include "fuse.h" -#include "iomap.h" -#include "tegra_cpu_car.h" - -#define USE_PLL_LOCK_BITS 0 - -#define RST_DEVICES_L 0x004 -#define RST_DEVICES_H 0x008 -#define RST_DEVICES_U 0x00C -#define RST_DEVICES_V 0x358 -#define RST_DEVICES_W 0x35C -#define RST_DEVICES_SET_L 0x300 -#define RST_DEVICES_CLR_L 0x304 -#define RST_DEVICES_SET_V 0x430 -#define RST_DEVICES_CLR_V 0x434 -#define RST_DEVICES_NUM 5 - -#define CLK_OUT_ENB_L 0x010 -#define CLK_OUT_ENB_H 0x014 -#define CLK_OUT_ENB_U 0x018 -#define CLK_OUT_ENB_V 0x360 -#define CLK_OUT_ENB_W 0x364 -#define CLK_OUT_ENB_SET_L 0x320 -#define CLK_OUT_ENB_CLR_L 0x324 -#define CLK_OUT_ENB_SET_V 0x440 -#define CLK_OUT_ENB_CLR_V 0x444 -#define CLK_OUT_ENB_NUM 5 - -#define RST_DEVICES_V_SWR_CPULP_RST_DIS (0x1 << 1) -#define CLK_OUT_ENB_V_CLK_ENB_CPULP_EN (0x1 << 1) - -#define PERIPH_CLK_TO_BIT(c) (1 << (c->u.periph.clk_num % 32)) -#define PERIPH_CLK_TO_RST_REG(c) \ - periph_clk_to_reg((c), RST_DEVICES_L, RST_DEVICES_V, 4) -#define PERIPH_CLK_TO_RST_SET_REG(c) \ - periph_clk_to_reg((c), RST_DEVICES_SET_L, RST_DEVICES_SET_V, 8) -#define PERIPH_CLK_TO_RST_CLR_REG(c) \ - periph_clk_to_reg((c), RST_DEVICES_CLR_L, RST_DEVICES_CLR_V, 8) - -#define PERIPH_CLK_TO_ENB_REG(c) \ - periph_clk_to_reg((c), CLK_OUT_ENB_L, CLK_OUT_ENB_V, 4) -#define PERIPH_CLK_TO_ENB_SET_REG(c) \ - periph_clk_to_reg((c), CLK_OUT_ENB_SET_L, CLK_OUT_ENB_SET_V, 8) -#define PERIPH_CLK_TO_ENB_CLR_REG(c) \ - periph_clk_to_reg((c), CLK_OUT_ENB_CLR_L, CLK_OUT_ENB_CLR_V, 8) - -#define CLK_MASK_ARM 0x44 -#define MISC_CLK_ENB 0x48 - -#define OSC_CTRL 0x50 -#define OSC_CTRL_OSC_FREQ_MASK (0xF<<28) -#define OSC_CTRL_OSC_FREQ_13MHZ (0x0<<28) -#define OSC_CTRL_OSC_FREQ_19_2MHZ (0x4<<28) -#define OSC_CTRL_OSC_FREQ_12MHZ (0x8<<28) -#define OSC_CTRL_OSC_FREQ_26MHZ (0xC<<28) -#define OSC_CTRL_OSC_FREQ_16_8MHZ (0x1<<28) -#define OSC_CTRL_OSC_FREQ_38_4MHZ (0x5<<28) -#define OSC_CTRL_OSC_FREQ_48MHZ (0x9<<28) -#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK) - -#define OSC_CTRL_PLL_REF_DIV_MASK (3<<26) -#define OSC_CTRL_PLL_REF_DIV_1 (0<<26) -#define OSC_CTRL_PLL_REF_DIV_2 (1<<26) -#define OSC_CTRL_PLL_REF_DIV_4 (2<<26) - -#define OSC_FREQ_DET 0x58 -#define OSC_FREQ_DET_TRIG (1<<31) - -#define OSC_FREQ_DET_STATUS 0x5C -#define OSC_FREQ_DET_BUSY (1<<31) -#define OSC_FREQ_DET_CNT_MASK 0xFFFF - -#define PERIPH_CLK_SOURCE_I2S1 0x100 -#define PERIPH_CLK_SOURCE_EMC 0x19c -#define PERIPH_CLK_SOURCE_OSC 0x1fc -#define PERIPH_CLK_SOURCE_NUM1 \ - ((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4) - -#define PERIPH_CLK_SOURCE_G3D2 0x3b0 -#define PERIPH_CLK_SOURCE_SE 0x42c -#define PERIPH_CLK_SOURCE_NUM2 \ - ((PERIPH_CLK_SOURCE_SE - PERIPH_CLK_SOURCE_G3D2) / 4 + 1) - -#define AUDIO_DLY_CLK 0x49c -#define AUDIO_SYNC_CLK_SPDIF 0x4b4 -#define PERIPH_CLK_SOURCE_NUM3 \ - ((AUDIO_SYNC_CLK_SPDIF - AUDIO_DLY_CLK) / 4 + 1) - -#define PERIPH_CLK_SOURCE_NUM (PERIPH_CLK_SOURCE_NUM1 + \ - PERIPH_CLK_SOURCE_NUM2 + \ - PERIPH_CLK_SOURCE_NUM3) - -#define CPU_SOFTRST_CTRL 0x380 - -#define PERIPH_CLK_SOURCE_DIVU71_MASK 0xFF -#define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF -#define PERIPH_CLK_SOURCE_DIV_SHIFT 0 -#define PERIPH_CLK_SOURCE_DIVIDLE_SHIFT 8 -#define PERIPH_CLK_SOURCE_DIVIDLE_VAL 50 -#define PERIPH_CLK_UART_DIV_ENB (1<<24) -#define PERIPH_CLK_VI_SEL_EX_SHIFT 24 -#define PERIPH_CLK_VI_SEL_EX_MASK (0x3<<PERIPH_CLK_VI_SEL_EX_SHIFT) -#define PERIPH_CLK_NAND_DIV_EX_ENB (1<<8) -#define PERIPH_CLK_DTV_POLARITY_INV (1<<25) - -#define AUDIO_SYNC_SOURCE_MASK 0x0F -#define AUDIO_SYNC_DISABLE_BIT 0x10 -#define AUDIO_SYNC_TAP_NIBBLE_SHIFT(c) ((c->reg_shift - 24) * 4) - -#define PLL_BASE 0x0 -#define PLL_BASE_BYPASS (1<<31) -#define PLL_BASE_ENABLE (1<<30) -#define PLL_BASE_REF_ENABLE (1<<29) -#define PLL_BASE_OVERRIDE (1<<28) -#define PLL_BASE_LOCK (1<<27) -#define PLL_BASE_DIVP_MASK (0x7<<20) -#define PLL_BASE_DIVP_SHIFT 20 -#define PLL_BASE_DIVN_MASK (0x3FF<<8) -#define PLL_BASE_DIVN_SHIFT 8 -#define PLL_BASE_DIVM_MASK (0x1F) -#define PLL_BASE_DIVM_SHIFT 0 - -#define PLL_OUT_RATIO_MASK (0xFF<<8) -#define PLL_OUT_RATIO_SHIFT 8 -#define PLL_OUT_OVERRIDE (1<<2) -#define PLL_OUT_CLKEN (1<<1) -#define PLL_OUT_RESET_DISABLE (1<<0) - -#define PLL_MISC(c) \ - (((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc) -#define PLL_MISC_LOCK_ENABLE(c) \ - (((c)->flags & (PLLU | PLLD)) ? (1<<22) : (1<<18)) - -#define PLL_MISC_DCCON_SHIFT 20 -#define PLL_MISC_CPCON_SHIFT 8 -#define PLL_MISC_CPCON_MASK (0xF<<PLL_MISC_CPCON_SHIFT) -#define PLL_MISC_LFCON_SHIFT 4 -#define PLL_MISC_LFCON_MASK (0xF<<PLL_MISC_LFCON_SHIFT) -#define PLL_MISC_VCOCON_SHIFT 0 -#define PLL_MISC_VCOCON_MASK (0xF<<PLL_MISC_VCOCON_SHIFT) -#define PLLD_MISC_CLKENABLE (1<<30) - -#define PLLU_BASE_POST_DIV (1<<20) - -#define PLLD_BASE_DSIB_MUX_SHIFT 25 -#define PLLD_BASE_DSIB_MUX_MASK (1<<PLLD_BASE_DSIB_MUX_SHIFT) -#define PLLD_BASE_CSI_CLKENABLE (1<<26) -#define PLLD_MISC_DSI_CLKENABLE (1<<30) -#define PLLD_MISC_DIV_RST (1<<23) -#define PLLD_MISC_DCCON_SHIFT 12 - -#define PLLDU_LFCON_SET_DIVN 600 - -/* FIXME: OUT_OF_TABLE_CPCON per pll */ -#define OUT_OF_TABLE_CPCON 0x8 - -#define SUPER_CLK_MUX 0x00 -#define SUPER_STATE_SHIFT 28 -#define SUPER_STATE_MASK (0xF << SUPER_STATE_SHIFT) -#define SUPER_STATE_STANDBY (0x0 << SUPER_STATE_SHIFT) -#define SUPER_STATE_IDLE (0x1 << SUPER_STATE_SHIFT) -#define SUPER_STATE_RUN (0x2 << SUPER_STATE_SHIFT) -#define SUPER_STATE_IRQ (0x3 << SUPER_STATE_SHIFT) -#define SUPER_STATE_FIQ (0x4 << SUPER_STATE_SHIFT) -#define SUPER_LP_DIV2_BYPASS (0x1 << 16) -#define SUPER_SOURCE_MASK 0xF -#define SUPER_FIQ_SOURCE_SHIFT 12 -#define SUPER_IRQ_SOURCE_SHIFT 8 -#define SUPER_RUN_SOURCE_SHIFT 4 -#define SUPER_IDLE_SOURCE_SHIFT 0 - -#define SUPER_CLK_DIVIDER 0x04 -#define SUPER_CLOCK_DIV_U71_SHIFT 16 -#define SUPER_CLOCK_DIV_U71_MASK (0xff << SUPER_CLOCK_DIV_U71_SHIFT) -/* guarantees safe cpu backup */ -#define SUPER_CLOCK_DIV_U71_MIN 0x2 - -#define BUS_CLK_DISABLE (1<<3) -#define BUS_CLK_DIV_MASK 0x3 - -#define PMC_CTRL 0x0 - #define PMC_CTRL_BLINK_ENB (1 << 7) - -#define PMC_DPD_PADS_ORIDE 0x1c - #define PMC_DPD_PADS_ORIDE_BLINK_ENB (1 << 20) - -#define PMC_BLINK_TIMER_DATA_ON_SHIFT 0 -#define PMC_BLINK_TIMER_DATA_ON_MASK 0x7fff -#define PMC_BLINK_TIMER_ENB (1 << 15) -#define PMC_BLINK_TIMER_DATA_OFF_SHIFT 16 -#define PMC_BLINK_TIMER_DATA_OFF_MASK 0xffff - -#define PMC_PLLP_WB0_OVERRIDE 0xf8 -#define PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE (1 << 12) - -#define UTMIP_PLL_CFG2 0x488 -#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6) -#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN (1 << 0) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN (1 << 2) -#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN (1 << 4) - -#define UTMIP_PLL_CFG1 0x484 -#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) -#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) -#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN (1 << 14) -#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN (1 << 12) -#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN (1 << 16) - -#define PLLE_BASE_CML_ENABLE (1<<31) -#define PLLE_BASE_ENABLE (1<<30) -#define PLLE_BASE_DIVCML_SHIFT 24 -#define PLLE_BASE_DIVCML_MASK (0xf<<PLLE_BASE_DIVCML_SHIFT) -#define PLLE_BASE_DIVP_SHIFT 16 -#define PLLE_BASE_DIVP_MASK (0x3f<<PLLE_BASE_DIVP_SHIFT) -#define PLLE_BASE_DIVN_SHIFT 8 -#define PLLE_BASE_DIVN_MASK (0xFF<<PLLE_BASE_DIVN_SHIFT) -#define PLLE_BASE_DIVM_SHIFT 0 -#define PLLE_BASE_DIVM_MASK (0xFF<<PLLE_BASE_DIVM_SHIFT) -#define PLLE_BASE_DIV_MASK \ - (PLLE_BASE_DIVCML_MASK | PLLE_BASE_DIVP_MASK | \ - PLLE_BASE_DIVN_MASK | PLLE_BASE_DIVM_MASK) -#define PLLE_BASE_DIV(m, n, p, cml) \ - (((cml)<<PLLE_BASE_DIVCML_SHIFT) | ((p)<<PLLE_BASE_DIVP_SHIFT) | \ - ((n)<<PLLE_BASE_DIVN_SHIFT) | ((m)<<PLLE_BASE_DIVM_SHIFT)) - -#define PLLE_MISC_SETUP_BASE_SHIFT 16 -#define PLLE_MISC_SETUP_BASE_MASK (0xFFFF<<PLLE_MISC_SETUP_BASE_SHIFT) -#define PLLE_MISC_READY (1<<15) -#define PLLE_MISC_LOCK (1<<11) -#define PLLE_MISC_LOCK_ENABLE (1<<9) -#define PLLE_MISC_SETUP_EX_SHIFT 2 -#define PLLE_MISC_SETUP_EX_MASK (0x3<<PLLE_MISC_SETUP_EX_SHIFT) -#define PLLE_MISC_SETUP_MASK \ - (PLLE_MISC_SETUP_BASE_MASK | PLLE_MISC_SETUP_EX_MASK) -#define PLLE_MISC_SETUP_VALUE \ - ((0x7<<PLLE_MISC_SETUP_BASE_SHIFT) | (0x0<<PLLE_MISC_SETUP_EX_SHIFT)) - -#define PLLE_SS_CTRL 0x68 -#define PLLE_SS_INCINTRV_SHIFT 24 -#define PLLE_SS_INCINTRV_MASK (0x3f<<PLLE_SS_INCINTRV_SHIFT) -#define PLLE_SS_INC_SHIFT 16 -#define PLLE_SS_INC_MASK (0xff<<PLLE_SS_INC_SHIFT) -#define PLLE_SS_MAX_SHIFT 0 -#define PLLE_SS_MAX_MASK (0x1ff<<PLLE_SS_MAX_SHIFT) -#define PLLE_SS_COEFFICIENTS_MASK \ - (PLLE_SS_INCINTRV_MASK | PLLE_SS_INC_MASK | PLLE_SS_MAX_MASK) -#define PLLE_SS_COEFFICIENTS_12MHZ \ - ((0x18<<PLLE_SS_INCINTRV_SHIFT) | (0x1<<PLLE_SS_INC_SHIFT) | \ - (0x24<<PLLE_SS_MAX_SHIFT)) -#define PLLE_SS_DISABLE ((1<<12) | (1<<11) | (1<<10)) - -#define PLLE_AUX 0x48c -#define PLLE_AUX_PLLP_SEL (1<<2) -#define PLLE_AUX_CML_SATA_ENABLE (1<<1) -#define PLLE_AUX_CML_PCIE_ENABLE (1<<0) - -#define PMC_SATA_PWRGT 0x1ac -#define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE (1<<5) -#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1<<4) - -#define ROUND_DIVIDER_UP 0 -#define ROUND_DIVIDER_DOWN 1 - -/* FIXME: recommended safety delay after lock is detected */ -#define PLL_POST_LOCK_DELAY 100 - -/* Tegra CPU clock and reset control regs */ -#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c -#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340 -#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR 0x344 -#define TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR 0x34c -#define TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470 - -#define CPU_CLOCK(cpu) (0x1 << (8 + cpu)) -#define CPU_RESET(cpu) (0x1111ul << (cpu)) - -#define CLK_RESET_CCLK_BURST 0x20 -#define CLK_RESET_CCLK_DIVIDER 0x24 -#define CLK_RESET_PLLX_BASE 0xe0 -#define CLK_RESET_PLLX_MISC 0xe4 - -#define CLK_RESET_SOURCE_CSITE 0x1d4 - -#define CLK_RESET_CCLK_BURST_POLICY_SHIFT 28 -#define CLK_RESET_CCLK_RUN_POLICY_SHIFT 4 -#define CLK_RESET_CCLK_IDLE_POLICY_SHIFT 0 -#define CLK_RESET_CCLK_IDLE_POLICY 1 -#define CLK_RESET_CCLK_RUN_POLICY 2 -#define CLK_RESET_CCLK_BURST_POLICY_PLLX 8 - -#ifdef CONFIG_PM_SLEEP -static struct cpu_clk_suspend_context { - u32 pllx_misc; - u32 pllx_base; - - u32 cpu_burst; - u32 clk_csite_src; - u32 cclk_divider; -} tegra30_cpu_clk_sctx; -#endif - -/** -* Structure defining the fields for USB UTMI clocks Parameters. -*/ -struct utmi_clk_param { - /* Oscillator Frequency in KHz */ - u32 osc_frequency; - /* UTMIP PLL Enable Delay Count */ - u8 enable_delay_count; - /* UTMIP PLL Stable count */ - u8 stable_count; - /* UTMIP PLL Active delay count */ - u8 active_delay_count; - /* UTMIP PLL Xtal frequency count */ - u8 xtal_freq_count; -}; - -static const struct utmi_clk_param utmi_parameters[] = { - { - .osc_frequency = 13000000, - .enable_delay_count = 0x02, - .stable_count = 0x33, - .active_delay_count = 0x05, - .xtal_freq_count = 0x7F - }, - { - .osc_frequency = 19200000, - .enable_delay_count = 0x03, - .stable_count = 0x4B, - .active_delay_count = 0x06, - .xtal_freq_count = 0xBB}, - { - .osc_frequency = 12000000, - .enable_delay_count = 0x02, - .stable_count = 0x2F, - .active_delay_count = 0x04, - .xtal_freq_count = 0x76 - }, - { - .osc_frequency = 26000000, - .enable_delay_count = 0x04, - .stable_count = 0x66, - .active_delay_count = 0x09, - .xtal_freq_count = 0xFE - }, - { - .osc_frequency = 16800000, - .enable_delay_count = 0x03, - .stable_count = 0x41, - .active_delay_count = 0x0A, - .xtal_freq_count = 0xA4 - }, -}; - -static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE); -static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); -static void __iomem *misc_gp_hidrev_base = IO_ADDRESS(TEGRA_APB_MISC_BASE); - -#define MISC_GP_HIDREV 0x804 - -/* - * Some peripheral clocks share an enable bit, so refcount the enable bits - * in registers CLK_ENABLE_L, ... CLK_ENABLE_W - */ -static int tegra_periph_clk_enable_refcount[CLK_OUT_ENB_NUM * 32]; - -#define clk_writel(value, reg) \ - __raw_writel(value, reg_clk_base + (reg)) -#define clk_readl(reg) \ - __raw_readl(reg_clk_base + (reg)) -#define pmc_writel(value, reg) \ - __raw_writel(value, reg_pmc_base + (reg)) -#define pmc_readl(reg) \ - __raw_readl(reg_pmc_base + (reg)) -#define chipid_readl() \ - __raw_readl(misc_gp_hidrev_base + MISC_GP_HIDREV) - -#define clk_writel_delay(value, reg) \ - do { \ - __raw_writel((value), reg_clk_base + (reg)); \ - udelay(2); \ - } while (0) - -static inline int clk_set_div(struct clk_tegra *c, u32 n) -{ - struct clk *clk = c->hw.clk; - - return clk_set_rate(clk, - (__clk_get_rate(__clk_get_parent(clk)) + n - 1) / n); -} - -static inline u32 periph_clk_to_reg( - struct clk_tegra *c, u32 reg_L, u32 reg_V, int offs) -{ - u32 reg = c->u.periph.clk_num / 32; - BUG_ON(reg >= RST_DEVICES_NUM); - if (reg < 3) - reg = reg_L + (reg * offs); - else - reg = reg_V + ((reg - 3) * offs); - return reg; -} - -static unsigned long clk_measure_input_freq(void) -{ - u32 clock_autodetect; - clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET); - do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY); - clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS); - if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) { - return 12000000; - } else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) { - return 13000000; - } else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) { - return 19200000; - } else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) { - return 26000000; - } else if (clock_autodetect >= 1025 - 3 && clock_autodetect <= 1025 + 3) { - return 16800000; - } else if (clock_autodetect >= 2344 - 3 && clock_autodetect <= 2344 + 3) { - return 38400000; - } else if (clock_autodetect >= 2928 - 3 && clock_autodetect <= 2928 + 3) { - return 48000000; - } else { - pr_err("%s: Unexpected clock autodetect value %d", __func__, - clock_autodetect); - BUG(); - return 0; - } -} - -static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate, - u32 flags, u32 round_mode) -{ - s64 divider_u71 = parent_rate; - if (!rate) - return -EINVAL; - - if (!(flags & DIV_U71_INT)) - divider_u71 *= 2; - if (round_mode == ROUND_DIVIDER_UP) - divider_u71 += rate - 1; - do_div(divider_u71, rate); - if (flags & DIV_U71_INT) - divider_u71 *= 2; - - if (divider_u71 - 2 < 0) - return 0; - - if (divider_u71 - 2 > 255) - return -EINVAL; - - return divider_u71 - 2; -} - -static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate) -{ - s64 divider_u16; - - divider_u16 = parent_rate; - if (!rate) - return -EINVAL; - divider_u16 += rate - 1; - do_div(divider_u16, rate); - - if (divider_u16 - 1 < 0) - return 0; - - if (divider_u16 - 1 > 0xFFFF) - return -EINVAL; - - return divider_u16 - 1; -} - -static unsigned long tegra30_clk_fixed_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - return to_clk_tegra(hw)->fixed_rate; -} - -struct clk_ops tegra30_clk_32k_ops = { - .recalc_rate = tegra30_clk_fixed_recalc_rate, -}; - -/* clk_m functions */ -static unsigned long tegra30_clk_m_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - if (!to_clk_tegra(hw)->fixed_rate) - to_clk_tegra(hw)->fixed_rate = clk_measure_input_freq(); - return to_clk_tegra(hw)->fixed_rate; -} - -static void tegra30_clk_m_init(struct clk_hw *hw) -{ - u32 osc_ctrl = clk_readl(OSC_CTRL); - u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK; - u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK; - - switch (to_clk_tegra(hw)->fixed_rate) { - case 12000000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ; - BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1); - break; - case 13000000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ; - BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1); - break; - case 19200000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ; - BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1); - break; - case 26000000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ; - BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1); - break; - case 16800000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_16_8MHZ; - BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1); - break; - case 38400000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_38_4MHZ; - BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_2); - break; - case 48000000: - auto_clock_control |= OSC_CTRL_OSC_FREQ_48MHZ; - BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_4); - break; - default: - pr_err("%s: Unexpected clock rate %ld", __func__, - to_clk_tegra(hw)->fixed_rate); - BUG(); - } - clk_writel(auto_clock_control, OSC_CTRL); -} - -struct clk_ops tegra30_clk_m_ops = { - .init = tegra30_clk_m_init, - .recalc_rate = tegra30_clk_m_recalc_rate, -}; - -static unsigned long tegra30_clk_m_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = parent_rate; - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - - return rate; -} - -struct clk_ops tegra_clk_m_div_ops = { - .recalc_rate = tegra30_clk_m_div_recalc_rate, -}; - -/* PLL reference divider functions */ -static unsigned long tegra30_pll_ref_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long rate = parent_rate; - u32 pll_ref_div = clk_readl(OSC_CTRL) & OSC_CTRL_PLL_REF_DIV_MASK; - - switch (pll_ref_div) { - case OSC_CTRL_PLL_REF_DIV_1: - c->div = 1; - break; - case OSC_CTRL_PLL_REF_DIV_2: - c->div = 2; - break; - case OSC_CTRL_PLL_REF_DIV_4: - c->div = 4; - break; - default: - pr_err("%s: Invalid pll ref divider %d", __func__, pll_ref_div); - BUG(); - } - c->mul = 1; - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - - return rate; -} - -struct clk_ops tegra_pll_ref_ops = { - .recalc_rate = tegra30_pll_ref_recalc_rate, -}; - -/* super clock functions */ -/* "super clocks" on tegra30 have two-stage muxes, fractional 7.1 divider and - * clock skipping super divider. We will ignore the clock skipping divider, - * since we can't lower the voltage when using the clock skip, but we can if - * we lower the PLL frequency. We will use 7.1 divider for CPU super-clock - * only when its parent is a fixed rate PLL, since we can't change PLL rate - * in this case. - */ -static void tegra30_super_clk_init(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - struct clk_tegra *p = - to_clk_tegra(__clk_get_hw(__clk_get_parent(hw->clk))); - - c->state = ON; - if (c->flags & DIV_U71) { - /* Init safe 7.1 divider value (does not affect PLLX path) */ - clk_writel(SUPER_CLOCK_DIV_U71_MIN << SUPER_CLOCK_DIV_U71_SHIFT, - c->reg + SUPER_CLK_DIVIDER); - c->mul = 2; - c->div = 2; - if (!(p->flags & PLLX)) - c->div += SUPER_CLOCK_DIV_U71_MIN; - } else - clk_writel(0, c->reg + SUPER_CLK_DIVIDER); -} - -static u8 tegra30_super_clk_get_parent(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - int source; - int shift; - - val = clk_readl(c->reg + SUPER_CLK_MUX); - BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) && - ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE)); - shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ? - SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT; - source = (val >> shift) & SUPER_SOURCE_MASK; - if (c->flags & DIV_2) - source |= val & SUPER_LP_DIV2_BYPASS; - - return source; -} - -static int tegra30_super_clk_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_tegra *c = to_clk_tegra(hw); - struct clk_tegra *p = - to_clk_tegra(__clk_get_hw(clk_get_parent(hw->clk))); - u32 val; - int shift; - - val = clk_readl(c->reg + SUPER_CLK_MUX); - BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) && - ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE)); - shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ? - SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT; - - /* For LP mode super-clock switch between PLLX direct - and divided-by-2 outputs is allowed only when other - than PLLX clock source is current parent */ - if ((c->flags & DIV_2) && (p->flags & PLLX) && - ((index ^ val) & SUPER_LP_DIV2_BYPASS)) { - if (p->flags & PLLX) - return -EINVAL; - val ^= SUPER_LP_DIV2_BYPASS; - clk_writel_delay(val, c->reg); - } - val &= ~(SUPER_SOURCE_MASK << shift); - val |= (index & SUPER_SOURCE_MASK) << shift; - - /* 7.1 divider for CPU super-clock does not affect - PLLX path */ - if (c->flags & DIV_U71) { - u32 div = 0; - if (!(p->flags & PLLX)) { - div = clk_readl(c->reg + - SUPER_CLK_DIVIDER); - div &= SUPER_CLOCK_DIV_U71_MASK; - div >>= SUPER_CLOCK_DIV_U71_SHIFT; - } - c->div = div + 2; - c->mul = 2; - } - clk_writel_delay(val, c->reg); - - return 0; -} - -/* - * Do not use super clocks "skippers", since dividing using a clock skipper - * does not allow the voltage to be scaled down. Instead adjust the rate of - * the parent clock. This requires that the parent of a super clock have no - * other children, otherwise the rate will change underneath the other - * children. Special case: if fixed rate PLL is CPU super clock parent the - * rate of this PLL can't be changed, and it has many other children. In - * this case use 7.1 fractional divider to adjust the super clock rate. - */ -static int tegra30_super_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - struct clk *parent = __clk_get_parent(hw->clk); - struct clk_tegra *cparent = to_clk_tegra(__clk_get_hw(parent)); - - if ((c->flags & DIV_U71) && (cparent->flags & PLL_FIXED)) { - int div = clk_div71_get_divider(parent_rate, - rate, c->flags, ROUND_DIVIDER_DOWN); - div = max(div, SUPER_CLOCK_DIV_U71_MIN); - - clk_writel(div << SUPER_CLOCK_DIV_U71_SHIFT, - c->reg + SUPER_CLK_DIVIDER); - c->div = div + 2; - c->mul = 2; - return 0; - } - return 0; -} - -static unsigned long tegra30_super_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = parent_rate; - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - - return rate; -} - -static long tegra30_super_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - struct clk *parent = __clk_get_parent(hw->clk); - struct clk_tegra *cparent = to_clk_tegra(__clk_get_hw(parent)); - int mul = 2; - int div; - - if ((c->flags & DIV_U71) && (cparent->flags & PLL_FIXED)) { - div = clk_div71_get_divider(*prate, - rate, c->flags, ROUND_DIVIDER_DOWN); - div = max(div, SUPER_CLOCK_DIV_U71_MIN) + 2; - rate = *prate * mul; - rate += div - 1; /* round up */ - do_div(rate, c->div); - - return rate; - } - return *prate; -} - -struct clk_ops tegra30_super_ops = { - .init = tegra30_super_clk_init, - .set_parent = tegra30_super_clk_set_parent, - .get_parent = tegra30_super_clk_get_parent, - .recalc_rate = tegra30_super_clk_recalc_rate, - .round_rate = tegra30_super_clk_round_rate, - .set_rate = tegra30_super_clk_set_rate, -}; - -static unsigned long tegra30_twd_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = parent_rate; - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - - return rate; -} - -struct clk_ops tegra30_twd_ops = { - .recalc_rate = tegra30_twd_clk_recalc_rate, -}; - -/* bus clock functions */ -static int tegra30_bus_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - - c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON; - return c->state; -} - -static int tegra30_bus_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - val = clk_readl(c->reg); - val &= ~(BUS_CLK_DISABLE << c->reg_shift); - clk_writel(val, c->reg); - - return 0; -} - -static void tegra30_bus_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - val = clk_readl(c->reg); - val |= BUS_CLK_DISABLE << c->reg_shift; - clk_writel(val, c->reg); -} - -static unsigned long tegra30_bus_clk_recalc_rate(struct clk_hw *hw, - unsigned long prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - u64 rate = prate; - - c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1; - c->mul = 1; - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - return rate; -} - -static int tegra30_bus_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - int ret = -EINVAL; - u32 val; - int i; - - val = clk_readl(c->reg); - for (i = 1; i <= 4; i++) { - if (rate == parent_rate / i) { - val &= ~(BUS_CLK_DIV_MASK << c->reg_shift); - val |= (i - 1) << c->reg_shift; - clk_writel(val, c->reg); - c->div = i; - c->mul = 1; - ret = 0; - break; - } - } - - return ret; -} - -static long tegra30_bus_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - unsigned long parent_rate = *prate; - s64 divider; - - if (rate >= parent_rate) - return parent_rate; - - divider = parent_rate; - divider += rate - 1; - do_div(divider, rate); - - if (divider < 0) - return divider; - - if (divider > 4) - divider = 4; - do_div(parent_rate, divider); - - return parent_rate; -} - -struct clk_ops tegra30_bus_ops = { - .is_enabled = tegra30_bus_clk_is_enabled, - .enable = tegra30_bus_clk_enable, - .disable = tegra30_bus_clk_disable, - .set_rate = tegra30_bus_clk_set_rate, - .round_rate = tegra30_bus_clk_round_rate, - .recalc_rate = tegra30_bus_clk_recalc_rate, -}; - -/* Blink output functions */ -static int tegra30_blink_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - val = pmc_readl(PMC_CTRL); - c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF; - return c->state; -} - -static int tegra30_blink_clk_enable(struct clk_hw *hw) -{ - u32 val; - - val = pmc_readl(PMC_DPD_PADS_ORIDE); - pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE); - - val = pmc_readl(PMC_CTRL); - pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL); - - return 0; -} - -static void tegra30_blink_clk_disable(struct clk_hw *hw) -{ - u32 val; - - val = pmc_readl(PMC_CTRL); - pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL); - - val = pmc_readl(PMC_DPD_PADS_ORIDE); - pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE); -} - -static int tegra30_blink_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - if (rate >= parent_rate) { - c->div = 1; - pmc_writel(0, c->reg); - } else { - unsigned int on_off; - u32 val; - - on_off = DIV_ROUND_UP(parent_rate / 8, rate); - c->div = on_off * 8; - - val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) << - PMC_BLINK_TIMER_DATA_ON_SHIFT; - on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK; - on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT; - val |= on_off; - val |= PMC_BLINK_TIMER_ENB; - pmc_writel(val, c->reg); - } - - return 0; -} - -static unsigned long tegra30_blink_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = parent_rate; - u32 val; - u32 mul; - u32 div; - u32 on_off; - - mul = 1; - val = pmc_readl(c->reg); - - if (val & PMC_BLINK_TIMER_ENB) { - on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) & - PMC_BLINK_TIMER_DATA_ON_MASK; - val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT; - val &= PMC_BLINK_TIMER_DATA_OFF_MASK; - on_off += val; - /* each tick in the blink timer is 4 32KHz clocks */ - div = on_off * 4; - } else { - div = 1; - } - - if (mul != 0 && div != 0) { - rate *= mul; - rate += div - 1; /* round up */ - do_div(rate, div); - } - return rate; -} - -static long tegra30_blink_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - int div; - int mul; - long round_rate = *prate; - - mul = 1; - - if (rate >= *prate) { - div = 1; - } else { - div = DIV_ROUND_UP(*prate / 8, rate); - div *= 8; - } - - round_rate *= mul; - round_rate += div - 1; - do_div(round_rate, div); - - return round_rate; -} - -struct clk_ops tegra30_blink_clk_ops = { - .is_enabled = tegra30_blink_clk_is_enabled, - .enable = tegra30_blink_clk_enable, - .disable = tegra30_blink_clk_disable, - .recalc_rate = tegra30_blink_clk_recalc_rate, - .round_rate = tegra30_blink_clk_round_rate, - .set_rate = tegra30_blink_clk_set_rate, -}; - -static void tegra30_utmi_param_configure(struct clk_hw *hw) -{ - unsigned long main_rate = - __clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk))); - u32 reg; - int i; - - for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { - if (main_rate == utmi_parameters[i].osc_frequency) - break; - } - - if (i >= ARRAY_SIZE(utmi_parameters)) { - pr_err("%s: Unexpected main rate %lu\n", __func__, main_rate); - return; - } - - reg = clk_readl(UTMIP_PLL_CFG2); - - /* Program UTMIP PLL stable and active counts */ - /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ - reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); - reg |= UTMIP_PLL_CFG2_STABLE_COUNT( - utmi_parameters[i].stable_count); - - reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT( - utmi_parameters[i].active_delay_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; - reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; - - clk_writel(reg, UTMIP_PLL_CFG2); - - /* Program UTMIP PLL delay and oscillator frequency counts */ - reg = clk_readl(UTMIP_PLL_CFG1); - reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); - - reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT( - utmi_parameters[i].enable_delay_count); - - reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); - reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT( - utmi_parameters[i].xtal_freq_count); - - /* Remove power downs from UTMIP PLL control bits */ - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; - reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; - - clk_writel(reg, UTMIP_PLL_CFG1); -} - -/* PLL Functions */ -static int tegra30_pll_clk_wait_for_lock(struct clk_tegra *c, u32 lock_reg, - u32 lock_bit) -{ - int ret = 0; - -#if USE_PLL_LOCK_BITS - int i; - for (i = 0; i < c->u.pll.lock_delay; i++) { - if (clk_readl(lock_reg) & lock_bit) { - udelay(PLL_POST_LOCK_DELAY); - return 0; - } - udelay(2); /* timeout = 2 * lock time */ - } - pr_err("Timed out waiting for lock bit on pll %s", - __clk_get_name(hw->clk)); - ret = -1; -#else - udelay(c->u.pll.lock_delay); -#endif - return ret; -} - -static int tegra30_pll_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg + PLL_BASE); - - c->state = (val & PLL_BASE_ENABLE) ? ON : OFF; - return c->state; -} - -static void tegra30_pll_clk_init(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - if (c->flags & PLLU) - tegra30_utmi_param_configure(hw); -} - -static int tegra30_pll_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk)); - -#if USE_PLL_LOCK_BITS - val = clk_readl(c->reg + PLL_MISC(c)); - val |= PLL_MISC_LOCK_ENABLE(c); - clk_writel(val, c->reg + PLL_MISC(c)); -#endif - val = clk_readl(c->reg + PLL_BASE); - val &= ~PLL_BASE_BYPASS; - val |= PLL_BASE_ENABLE; - clk_writel(val, c->reg + PLL_BASE); - - if (c->flags & PLLM) { - val = pmc_readl(PMC_PLLP_WB0_OVERRIDE); - val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE; - pmc_writel(val, PMC_PLLP_WB0_OVERRIDE); - } - - tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_BASE, PLL_BASE_LOCK); - - return 0; -} - -static void tegra30_pll_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - pr_debug("%s on clock %s\n", __func__, __clk_get_name(hw->clk)); - - val = clk_readl(c->reg); - val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE); - clk_writel(val, c->reg); - - if (c->flags & PLLM) { - val = pmc_readl(PMC_PLLP_WB0_OVERRIDE); - val &= ~PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE; - pmc_writel(val, PMC_PLLP_WB0_OVERRIDE); - } -} - -static int tegra30_pll_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val, p_div, old_base; - unsigned long input_rate; - const struct clk_pll_freq_table *sel; - struct clk_pll_freq_table cfg; - - if (c->flags & PLL_FIXED) { - int ret = 0; - if (rate != c->u.pll.fixed_rate) { - pr_err("%s: Can not change %s fixed rate %lu to %lu\n", - __func__, __clk_get_name(hw->clk), - c->u.pll.fixed_rate, rate); - ret = -EINVAL; - } - return ret; - } - - if (c->flags & PLLM) { - if (rate != __clk_get_rate(hw->clk)) { - pr_err("%s: Can not change memory %s rate in flight\n", - __func__, __clk_get_name(hw->clk)); - return -EINVAL; - } - } - - p_div = 0; - input_rate = parent_rate; - - /* Check if the target rate is tabulated */ - for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { - if (sel->input_rate == input_rate && sel->output_rate == rate) { - if (c->flags & PLLU) { - BUG_ON(sel->p < 1 || sel->p > 2); - if (sel->p == 1) - p_div = PLLU_BASE_POST_DIV; - } else { - BUG_ON(sel->p < 1); - for (val = sel->p; val > 1; val >>= 1) - p_div++; - p_div <<= PLL_BASE_DIVP_SHIFT; - } - break; - } - } - - /* Configure out-of-table rate */ - if (sel->input_rate == 0) { - unsigned long cfreq; - BUG_ON(c->flags & PLLU); - sel = &cfg; - - switch (input_rate) { - case 12000000: - case 26000000: - cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000; - break; - case 13000000: - cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000; - break; - case 16800000: - case 19200000: - cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000; - break; - default: - pr_err("%s: Unexpected reference rate %lu\n", - __func__, input_rate); - BUG(); - } - - /* Raise VCO to guarantee 0.5% accuracy */ - for (cfg.output_rate = rate; cfg.output_rate < 200 * cfreq; - cfg.output_rate <<= 1) - p_div++; - - cfg.p = 0x1 << p_div; - cfg.m = input_rate / cfreq; - cfg.n = cfg.output_rate / cfreq; - cfg.cpcon = OUT_OF_TABLE_CPCON; - - if ((cfg.m > (PLL_BASE_DIVM_MASK >> PLL_BASE_DIVM_SHIFT)) || - (cfg.n > (PLL_BASE_DIVN_MASK >> PLL_BASE_DIVN_SHIFT)) || - (p_div > (PLL_BASE_DIVP_MASK >> PLL_BASE_DIVP_SHIFT)) || - (cfg.output_rate > c->u.pll.vco_max)) { - pr_err("%s: Failed to set %s out-of-table rate %lu\n", - __func__, __clk_get_name(hw->clk), rate); - return -EINVAL; - } - p_div <<= PLL_BASE_DIVP_SHIFT; - } - - c->mul = sel->n; - c->div = sel->m * sel->p; - - old_base = val = clk_readl(c->reg + PLL_BASE); - val &= ~(PLL_BASE_DIVM_MASK | PLL_BASE_DIVN_MASK | - ((c->flags & PLLU) ? PLLU_BASE_POST_DIV : PLL_BASE_DIVP_MASK)); - val |= (sel->m << PLL_BASE_DIVM_SHIFT) | - (sel->n << PLL_BASE_DIVN_SHIFT) | p_div; - if (val == old_base) - return 0; - - if (c->state == ON) { - tegra30_pll_clk_disable(hw); - val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE); - } - clk_writel(val, c->reg + PLL_BASE); - - if (c->flags & PLL_HAS_CPCON) { - val = clk_readl(c->reg + PLL_MISC(c)); - val &= ~PLL_MISC_CPCON_MASK; - val |= sel->cpcon << PLL_MISC_CPCON_SHIFT; - if (c->flags & (PLLU | PLLD)) { - val &= ~PLL_MISC_LFCON_MASK; - if (sel->n >= PLLDU_LFCON_SET_DIVN) - val |= 0x1 << PLL_MISC_LFCON_SHIFT; - } else if (c->flags & (PLLX | PLLM)) { - val &= ~(0x1 << PLL_MISC_DCCON_SHIFT); - if (rate >= (c->u.pll.vco_max >> 1)) - val |= 0x1 << PLL_MISC_DCCON_SHIFT; - } - clk_writel(val, c->reg + PLL_MISC(c)); - } - - if (c->state == ON) - tegra30_pll_clk_enable(hw); - - c->u.pll.fixed_rate = rate; - - return 0; -} - -static long tegra30_pll_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long input_rate = *prate; - u64 output_rate = *prate; - const struct clk_pll_freq_table *sel; - struct clk_pll_freq_table cfg; - int mul; - int div; - u32 p_div; - u32 val; - - if (c->flags & PLL_FIXED) - return c->u.pll.fixed_rate; - - if (c->flags & PLLM) - return __clk_get_rate(hw->clk); - - p_div = 0; - /* Check if the target rate is tabulated */ - for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { - if (sel->input_rate == input_rate && sel->output_rate == rate) { - if (c->flags & PLLU) { - BUG_ON(sel->p < 1 || sel->p > 2); - if (sel->p == 1) - p_div = PLLU_BASE_POST_DIV; - } else { - BUG_ON(sel->p < 1); - for (val = sel->p; val > 1; val >>= 1) - p_div++; - p_div <<= PLL_BASE_DIVP_SHIFT; - } - break; - } - } - - if (sel->input_rate == 0) { - unsigned long cfreq; - BUG_ON(c->flags & PLLU); - sel = &cfg; - - switch (input_rate) { - case 12000000: - case 26000000: - cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000; - break; - case 13000000: - cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000; - break; - case 16800000: - case 19200000: - cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000; - break; - default: - pr_err("%s: Unexpected reference rate %lu\n", - __func__, input_rate); - BUG(); - } - - /* Raise VCO to guarantee 0.5% accuracy */ - for (cfg.output_rate = rate; cfg.output_rate < 200 * cfreq; - cfg.output_rate <<= 1) - p_div++; - - cfg.p = 0x1 << p_div; - cfg.m = input_rate / cfreq; - cfg.n = cfg.output_rate / cfreq; - } - - mul = sel->n; - div = sel->m * sel->p; - - output_rate *= mul; - output_rate += div - 1; /* round up */ - do_div(output_rate, div); - - return output_rate; -} - -static unsigned long tegra30_pll_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = parent_rate; - u32 val = clk_readl(c->reg + PLL_BASE); - - if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) { - const struct clk_pll_freq_table *sel; - for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { - if (sel->input_rate == parent_rate && - sel->output_rate == c->u.pll.fixed_rate) { - c->mul = sel->n; - c->div = sel->m * sel->p; - break; - } - } - pr_err("Clock %s has unknown fixed frequency\n", - __clk_get_name(hw->clk)); - BUG(); - } else if (val & PLL_BASE_BYPASS) { - c->mul = 1; - c->div = 1; - } else { - c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT; - c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT; - if (c->flags & PLLU) - c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2; - else - c->div *= (0x1 << ((val & PLL_BASE_DIVP_MASK) >> - PLL_BASE_DIVP_SHIFT)); - } - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - - return rate; -} - -struct clk_ops tegra30_pll_ops = { - .is_enabled = tegra30_pll_clk_is_enabled, - .init = tegra30_pll_clk_init, - .enable = tegra30_pll_clk_enable, - .disable = tegra30_pll_clk_disable, - .recalc_rate = tegra30_pll_recalc_rate, - .round_rate = tegra30_pll_round_rate, - .set_rate = tegra30_pll_clk_set_rate, -}; - -int tegra30_plld_clk_cfg_ex(struct clk_hw *hw, - enum tegra_clk_ex_param p, u32 setting) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val, mask, reg; - - switch (p) { - case TEGRA_CLK_PLLD_CSI_OUT_ENB: - mask = PLLD_BASE_CSI_CLKENABLE; - reg = c->reg + PLL_BASE; - break; - case TEGRA_CLK_PLLD_DSI_OUT_ENB: - mask = PLLD_MISC_DSI_CLKENABLE; - reg = c->reg + PLL_MISC(c); - break; - case TEGRA_CLK_PLLD_MIPI_MUX_SEL: - if (!(c->flags & PLL_ALT_MISC_REG)) { - mask = PLLD_BASE_DSIB_MUX_MASK; - reg = c->reg + PLL_BASE; - break; - } - /* fall through - error since PLLD2 does not have MUX_SEL control */ - default: - return -EINVAL; - } - - val = clk_readl(reg); - if (setting) - val |= mask; - else - val &= ~mask; - clk_writel(val, reg); - return 0; -} - -static int tegra30_plle_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - val = clk_readl(c->reg + PLL_BASE); - c->state = (val & PLLE_BASE_ENABLE) ? ON : OFF; - return c->state; -} - -static void tegra30_plle_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - val = clk_readl(c->reg + PLL_BASE); - val &= ~(PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE); - clk_writel(val, c->reg + PLL_BASE); -} - -static void tegra30_plle_training(struct clk_tegra *c) -{ - u32 val; - - /* PLLE is already disabled, and setup cleared; - * create falling edge on PLLE IDDQ input */ - val = pmc_readl(PMC_SATA_PWRGT); - val |= PMC_SATA_PWRGT_PLLE_IDDQ_VALUE; - pmc_writel(val, PMC_SATA_PWRGT); - - val = pmc_readl(PMC_SATA_PWRGT); - val |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL; - pmc_writel(val, PMC_SATA_PWRGT); - - val = pmc_readl(PMC_SATA_PWRGT); - val &= ~PMC_SATA_PWRGT_PLLE_IDDQ_VALUE; - pmc_writel(val, PMC_SATA_PWRGT); - - do { - val = clk_readl(c->reg + PLL_MISC(c)); - } while (!(val & PLLE_MISC_READY)); -} - -static int tegra30_plle_configure(struct clk_hw *hw, bool force_training) -{ - struct clk_tegra *c = to_clk_tegra(hw); - struct clk *parent = __clk_get_parent(hw->clk); - const struct clk_pll_freq_table *sel; - u32 val; - - unsigned long rate = c->u.pll.fixed_rate; - unsigned long input_rate = __clk_get_rate(parent); - - for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) { - if (sel->input_rate == input_rate && sel->output_rate == rate) - break; - } - - if (sel->input_rate == 0) - return -ENOSYS; - - /* disable PLLE, clear setup fiels */ - tegra30_plle_clk_disable(hw); - - val = clk_readl(c->reg + PLL_MISC(c)); - val &= ~(PLLE_MISC_LOCK_ENABLE | PLLE_MISC_SETUP_MASK); - clk_writel(val, c->reg + PLL_MISC(c)); - - /* training */ - val = clk_readl(c->reg + PLL_MISC(c)); - if (force_training || (!(val & PLLE_MISC_READY))) - tegra30_plle_training(c); - - /* configure dividers, setup, disable SS */ - val = clk_readl(c->reg + PLL_BASE); - val &= ~PLLE_BASE_DIV_MASK; - val |= PLLE_BASE_DIV(sel->m, sel->n, sel->p, sel->cpcon); - clk_writel(val, c->reg + PLL_BASE); - c->mul = sel->n; - c->div = sel->m * sel->p; - - val = clk_readl(c->reg + PLL_MISC(c)); - val |= PLLE_MISC_SETUP_VALUE; - val |= PLLE_MISC_LOCK_ENABLE; - clk_writel(val, c->reg + PLL_MISC(c)); - - val = clk_readl(PLLE_SS_CTRL); - val |= PLLE_SS_DISABLE; - clk_writel(val, PLLE_SS_CTRL); - - /* enable and lock PLLE*/ - val = clk_readl(c->reg + PLL_BASE); - val |= (PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE); - clk_writel(val, c->reg + PLL_BASE); - - tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_MISC(c), PLLE_MISC_LOCK); - - return 0; -} - -static int tegra30_plle_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - return tegra30_plle_configure(hw, !c->set); -} - -static unsigned long tegra30_plle_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long rate = parent_rate; - u32 val; - - val = clk_readl(c->reg + PLL_BASE); - c->mul = (val & PLLE_BASE_DIVN_MASK) >> PLLE_BASE_DIVN_SHIFT; - c->div = (val & PLLE_BASE_DIVM_MASK) >> PLLE_BASE_DIVM_SHIFT; - c->div *= (val & PLLE_BASE_DIVP_MASK) >> PLLE_BASE_DIVP_SHIFT; - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - return rate; -} - -struct clk_ops tegra30_plle_ops = { - .is_enabled = tegra30_plle_clk_is_enabled, - .enable = tegra30_plle_clk_enable, - .disable = tegra30_plle_clk_disable, - .recalc_rate = tegra30_plle_clk_recalc_rate, -}; - -/* Clock divider ops */ -static int tegra30_pll_div_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - if (c->flags & DIV_U71) { - u32 val = clk_readl(c->reg); - val >>= c->reg_shift; - c->state = (val & PLL_OUT_CLKEN) ? ON : OFF; - if (!(val & PLL_OUT_RESET_DISABLE)) - c->state = OFF; - } else { - c->state = ON; - } - return c->state; -} - -static int tegra30_pll_div_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - u32 new_val; - - pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk)); - if (c->flags & DIV_U71) { - val = clk_readl(c->reg); - new_val = val >> c->reg_shift; - new_val &= 0xFFFF; - - new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE; - - val &= ~(0xFFFF << c->reg_shift); - val |= new_val << c->reg_shift; - clk_writel_delay(val, c->reg); - return 0; - } else if (c->flags & DIV_2) { - return 0; - } - return -EINVAL; -} - -static void tegra30_pll_div_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - u32 new_val; - - pr_debug("%s: %s\n", __func__, __clk_get_name(hw->clk)); - if (c->flags & DIV_U71) { - val = clk_readl(c->reg); - new_val = val >> c->reg_shift; - new_val &= 0xFFFF; - - new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE); - - val &= ~(0xFFFF << c->reg_shift); - val |= new_val << c->reg_shift; - clk_writel_delay(val, c->reg); - } -} - -static int tegra30_pll_div_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - u32 new_val; - int divider_u71; - - if (c->flags & DIV_U71) { - divider_u71 = clk_div71_get_divider( - parent_rate, rate, c->flags, ROUND_DIVIDER_UP); - if (divider_u71 >= 0) { - val = clk_readl(c->reg); - new_val = val >> c->reg_shift; - new_val &= 0xFFFF; - if (c->flags & DIV_U71_FIXED) - new_val |= PLL_OUT_OVERRIDE; - new_val &= ~PLL_OUT_RATIO_MASK; - new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT; - - val &= ~(0xFFFF << c->reg_shift); - val |= new_val << c->reg_shift; - clk_writel_delay(val, c->reg); - c->div = divider_u71 + 2; - c->mul = 2; - c->fixed_rate = rate; - return 0; - } - } else if (c->flags & DIV_2) { - c->fixed_rate = rate; - return 0; - } - - return -EINVAL; -} - -static unsigned long tegra30_pll_div_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = parent_rate; - - if (c->flags & DIV_U71) { - u32 divu71; - u32 val = clk_readl(c->reg); - val >>= c->reg_shift; - - divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT; - c->div = (divu71 + 2); - c->mul = 2; - } else if (c->flags & DIV_2) { - if (c->flags & (PLLD | PLLX)) { - c->div = 2; - c->mul = 1; - } else - BUG(); - } else { - c->div = 1; - c->mul = 1; - } - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - - return rate; -} - -static long tegra30_pll_div_clk_round_rate(struct clk_hw *hw, - unsigned long rate, unsigned long *prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk)); - int divider; - - if (prate) - parent_rate = *prate; - - if (c->flags & DIV_U71) { - divider = clk_div71_get_divider( - parent_rate, rate, c->flags, ROUND_DIVIDER_UP); - if (divider < 0) - return divider; - return DIV_ROUND_UP(parent_rate * 2, divider + 2); - } else if (c->flags & DIV_2) { - *prate = rate * 2; - return rate; - } - - return -EINVAL; -} - -struct clk_ops tegra30_pll_div_ops = { - .is_enabled = tegra30_pll_div_clk_is_enabled, - .enable = tegra30_pll_div_clk_enable, - .disable = tegra30_pll_div_clk_disable, - .set_rate = tegra30_pll_div_clk_set_rate, - .recalc_rate = tegra30_pll_div_clk_recalc_rate, - .round_rate = tegra30_pll_div_clk_round_rate, -}; - -/* Periph clk ops */ -static inline u32 periph_clk_source_mask(struct clk_tegra *c) -{ - if (c->flags & MUX8) - return 7 << 29; - else if (c->flags & MUX_PWM) - return 3 << 28; - else if (c->flags & MUX_CLK_OUT) - return 3 << (c->u.periph.clk_num + 4); - else if (c->flags & PLLD) - return PLLD_BASE_DSIB_MUX_MASK; - else - return 3 << 30; -} - -static inline u32 periph_clk_source_shift(struct clk_tegra *c) -{ - if (c->flags & MUX8) - return 29; - else if (c->flags & MUX_PWM) - return 28; - else if (c->flags & MUX_CLK_OUT) - return c->u.periph.clk_num + 4; - else if (c->flags & PLLD) - return PLLD_BASE_DSIB_MUX_SHIFT; - else - return 30; -} - -static int tegra30_periph_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - c->state = ON; - if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c))) - c->state = OFF; - if (!(c->flags & PERIPH_NO_RESET)) - if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) & PERIPH_CLK_TO_BIT(c)) - c->state = OFF; - return c->state; -} - -static int tegra30_periph_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++; - if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1) - return 0; - - clk_writel_delay(PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_SET_REG(c)); - if (!(c->flags & PERIPH_NO_RESET) && - !(c->flags & PERIPH_MANUAL_RESET)) { - if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) & - PERIPH_CLK_TO_BIT(c)) { - udelay(5); /* reset propagation delay */ - clk_writel(PERIPH_CLK_TO_BIT(c), - PERIPH_CLK_TO_RST_CLR_REG(c)); - } - } - return 0; -} - -static void tegra30_periph_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long val; - - tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--; - - if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 0) - return; - - /* If peripheral is in the APB bus then read the APB bus to - * flush the write operation in apb bus. This will avoid the - * peripheral access after disabling clock*/ - if (c->flags & PERIPH_ON_APB) - val = chipid_readl(); - - clk_writel_delay(PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_CLR_REG(c)); -} - -void tegra30_periph_clk_reset(struct clk_hw *hw, bool assert) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long val; - - if (!(c->flags & PERIPH_NO_RESET)) { - if (assert) { - /* If peripheral is in the APB bus then read the APB - * bus to flush the write operation in apb bus. This - * will avoid the peripheral access after disabling - * clock */ - if (c->flags & PERIPH_ON_APB) - val = chipid_readl(); - - clk_writel(PERIPH_CLK_TO_BIT(c), - PERIPH_CLK_TO_RST_SET_REG(c)); - } else - clk_writel(PERIPH_CLK_TO_BIT(c), - PERIPH_CLK_TO_RST_CLR_REG(c)); - } -} - -static int tegra30_periph_clk_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - if (!(c->flags & MUX)) - return (index == 0) ? 0 : (-EINVAL); - - val = clk_readl(c->reg); - val &= ~periph_clk_source_mask(c); - val |= (index << periph_clk_source_shift(c)); - clk_writel_delay(val, c->reg); - return 0; -} - -static u8 tegra30_periph_clk_get_parent(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - int source = (val & periph_clk_source_mask(c)) >> - periph_clk_source_shift(c); - - if (!(c->flags & MUX)) - return 0; - - return source; -} - -static int tegra30_periph_clk_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - int divider; - - if (c->flags & DIV_U71) { - divider = clk_div71_get_divider( - parent_rate, rate, c->flags, ROUND_DIVIDER_UP); - if (divider >= 0) { - val = clk_readl(c->reg); - val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK; - val |= divider; - if (c->flags & DIV_U71_UART) { - if (divider) - val |= PERIPH_CLK_UART_DIV_ENB; - else - val &= ~PERIPH_CLK_UART_DIV_ENB; - } - clk_writel_delay(val, c->reg); - c->div = divider + 2; - c->mul = 2; - return 0; - } - } else if (c->flags & DIV_U16) { - divider = clk_div16_get_divider(parent_rate, rate); - if (divider >= 0) { - val = clk_readl(c->reg); - val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK; - val |= divider; - clk_writel_delay(val, c->reg); - c->div = divider + 1; - c->mul = 1; - return 0; - } - } else if (parent_rate <= rate) { - c->div = 1; - c->mul = 1; - return 0; - } - return -EINVAL; -} - -static long tegra30_periph_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk)); - int divider; - - if (prate) - parent_rate = *prate; - - if (c->flags & DIV_U71) { - divider = clk_div71_get_divider( - parent_rate, rate, c->flags, ROUND_DIVIDER_UP); - if (divider < 0) - return divider; - - return DIV_ROUND_UP(parent_rate * 2, divider + 2); - } else if (c->flags & DIV_U16) { - divider = clk_div16_get_divider(parent_rate, rate); - if (divider < 0) - return divider; - return DIV_ROUND_UP(parent_rate, divider + 1); - } - return -EINVAL; -} - -static unsigned long tegra30_periph_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = parent_rate; - u32 val = clk_readl(c->reg); - - if (c->flags & DIV_U71) { - u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK; - if ((c->flags & DIV_U71_UART) && - (!(val & PERIPH_CLK_UART_DIV_ENB))) { - divu71 = 0; - } - if (c->flags & DIV_U71_IDLE) { - val &= ~(PERIPH_CLK_SOURCE_DIVU71_MASK << - PERIPH_CLK_SOURCE_DIVIDLE_SHIFT); - val |= (PERIPH_CLK_SOURCE_DIVIDLE_VAL << - PERIPH_CLK_SOURCE_DIVIDLE_SHIFT); - clk_writel(val, c->reg); - } - c->div = divu71 + 2; - c->mul = 2; - } else if (c->flags & DIV_U16) { - u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK; - c->div = divu16 + 1; - c->mul = 1; - } else { - c->div = 1; - c->mul = 1; - } - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - return rate; -} - -struct clk_ops tegra30_periph_clk_ops = { - .is_enabled = tegra30_periph_clk_is_enabled, - .enable = tegra30_periph_clk_enable, - .disable = tegra30_periph_clk_disable, - .set_parent = tegra30_periph_clk_set_parent, - .get_parent = tegra30_periph_clk_get_parent, - .set_rate = tegra30_periph_clk_set_rate, - .round_rate = tegra30_periph_clk_round_rate, - .recalc_rate = tegra30_periph_clk_recalc_rate, -}; - -static int tegra30_dsib_clk_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk *d = clk_get_sys(NULL, "pll_d"); - /* The DSIB parent selection bit is in PLLD base register */ - tegra_clk_cfg_ex( - d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, index); - - return 0; -} - -struct clk_ops tegra30_dsib_clk_ops = { - .is_enabled = tegra30_periph_clk_is_enabled, - .enable = &tegra30_periph_clk_enable, - .disable = &tegra30_periph_clk_disable, - .set_parent = &tegra30_dsib_clk_set_parent, - .get_parent = &tegra30_periph_clk_get_parent, - .set_rate = &tegra30_periph_clk_set_rate, - .round_rate = &tegra30_periph_clk_round_rate, - .recalc_rate = &tegra30_periph_clk_recalc_rate, -}; - -/* Periph extended clock configuration ops */ -int tegra30_vi_clk_cfg_ex(struct clk_hw *hw, - enum tegra_clk_ex_param p, u32 setting) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - if (p == TEGRA_CLK_VI_INP_SEL) { - u32 val = clk_readl(c->reg); - val &= ~PERIPH_CLK_VI_SEL_EX_MASK; - val |= (setting << PERIPH_CLK_VI_SEL_EX_SHIFT) & - PERIPH_CLK_VI_SEL_EX_MASK; - clk_writel(val, c->reg); - return 0; - } - return -EINVAL; -} - -int tegra30_nand_clk_cfg_ex(struct clk_hw *hw, - enum tegra_clk_ex_param p, u32 setting) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - if (p == TEGRA_CLK_NAND_PAD_DIV2_ENB) { - u32 val = clk_readl(c->reg); - if (setting) - val |= PERIPH_CLK_NAND_DIV_EX_ENB; - else - val &= ~PERIPH_CLK_NAND_DIV_EX_ENB; - clk_writel(val, c->reg); - return 0; - } - return -EINVAL; -} - -int tegra30_dtv_clk_cfg_ex(struct clk_hw *hw, - enum tegra_clk_ex_param p, u32 setting) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - if (p == TEGRA_CLK_DTV_INVERT) { - u32 val = clk_readl(c->reg); - if (setting) - val |= PERIPH_CLK_DTV_POLARITY_INV; - else - val &= ~PERIPH_CLK_DTV_POLARITY_INV; - clk_writel(val, c->reg); - return 0; - } - return -EINVAL; -} - -/* Output clock ops */ - -static DEFINE_SPINLOCK(clk_out_lock); - -static int tegra30_clk_out_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = pmc_readl(c->reg); - - c->state = (val & (0x1 << c->u.periph.clk_num)) ? ON : OFF; - c->mul = 1; - c->div = 1; - return c->state; -} - -static int tegra30_clk_out_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - unsigned long flags; - - spin_lock_irqsave(&clk_out_lock, flags); - val = pmc_readl(c->reg); - val |= (0x1 << c->u.periph.clk_num); - pmc_writel(val, c->reg); - spin_unlock_irqrestore(&clk_out_lock, flags); - - return 0; -} - -static void tegra30_clk_out_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - unsigned long flags; - - spin_lock_irqsave(&clk_out_lock, flags); - val = pmc_readl(c->reg); - val &= ~(0x1 << c->u.periph.clk_num); - pmc_writel(val, c->reg); - spin_unlock_irqrestore(&clk_out_lock, flags); -} - -static int tegra30_clk_out_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - unsigned long flags; - - spin_lock_irqsave(&clk_out_lock, flags); - val = pmc_readl(c->reg); - val &= ~periph_clk_source_mask(c); - val |= (index << periph_clk_source_shift(c)); - pmc_writel(val, c->reg); - spin_unlock_irqrestore(&clk_out_lock, flags); - - return 0; -} - -static u8 tegra30_clk_out_get_parent(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = pmc_readl(c->reg); - int source; - - source = (val & periph_clk_source_mask(c)) >> - periph_clk_source_shift(c); - return source; -} - -struct clk_ops tegra_clk_out_ops = { - .is_enabled = tegra30_clk_out_is_enabled, - .enable = tegra30_clk_out_enable, - .disable = tegra30_clk_out_disable, - .set_parent = tegra30_clk_out_set_parent, - .get_parent = tegra30_clk_out_get_parent, - .recalc_rate = tegra30_clk_fixed_recalc_rate, -}; - -/* Clock doubler ops */ -static int tegra30_clk_double_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - c->state = ON; - if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c))) - c->state = OFF; - return c->state; -}; - -static int tegra30_clk_double_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - if (rate == parent_rate) { - val = clk_readl(c->reg) | (0x1 << c->reg_shift); - clk_writel(val, c->reg); - c->mul = 1; - c->div = 1; - return 0; - } else if (rate == 2 * parent_rate) { - val = clk_readl(c->reg) & (~(0x1 << c->reg_shift)); - clk_writel(val, c->reg); - c->mul = 2; - c->div = 1; - return 0; - } - return -EINVAL; -} - -static unsigned long tegra30_clk_double_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u64 rate = parent_rate; - - u32 val = clk_readl(c->reg); - c->mul = val & (0x1 << c->reg_shift) ? 1 : 2; - c->div = 1; - - if (c->mul != 0 && c->div != 0) { - rate *= c->mul; - rate += c->div - 1; /* round up */ - do_div(rate, c->div); - } - - return rate; -} - -static long tegra30_clk_double_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - unsigned long output_rate = *prate; - - do_div(output_rate, 2); - return output_rate; -} - -struct clk_ops tegra30_clk_double_ops = { - .is_enabled = tegra30_clk_double_is_enabled, - .enable = tegra30_periph_clk_enable, - .disable = tegra30_periph_clk_disable, - .recalc_rate = tegra30_clk_double_recalc_rate, - .round_rate = tegra30_clk_double_round_rate, - .set_rate = tegra30_clk_double_set_rate, -}; - -/* Audio sync clock ops */ -struct clk_ops tegra_sync_source_ops = { - .recalc_rate = tegra30_clk_fixed_recalc_rate, -}; - -static int tegra30_audio_sync_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - c->state = (val & AUDIO_SYNC_DISABLE_BIT) ? OFF : ON; - return c->state; -} - -static int tegra30_audio_sync_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - clk_writel((val & (~AUDIO_SYNC_DISABLE_BIT)), c->reg); - return 0; -} - -static void tegra30_audio_sync_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - clk_writel((val | AUDIO_SYNC_DISABLE_BIT), c->reg); -} - -static int tegra30_audio_sync_clk_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val; - - val = clk_readl(c->reg); - val &= ~AUDIO_SYNC_SOURCE_MASK; - val |= index; - - clk_writel(val, c->reg); - return 0; -} - -static u8 tegra30_audio_sync_clk_get_parent(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - int source; - - source = val & AUDIO_SYNC_SOURCE_MASK; - return source; -} - -struct clk_ops tegra30_audio_sync_clk_ops = { - .is_enabled = tegra30_audio_sync_clk_is_enabled, - .enable = tegra30_audio_sync_clk_enable, - .disable = tegra30_audio_sync_clk_disable, - .set_parent = tegra30_audio_sync_clk_set_parent, - .get_parent = tegra30_audio_sync_clk_get_parent, - .recalc_rate = tegra30_clk_fixed_recalc_rate, -}; - -/* cml0 (pcie), and cml1 (sata) clock ops */ -static int tegra30_cml_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - u32 val = clk_readl(c->reg); - c->state = val & (0x1 << c->u.periph.clk_num) ? ON : OFF; - return c->state; -} - -static int tegra30_cml_clk_enable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - u32 val = clk_readl(c->reg); - val |= (0x1 << c->u.periph.clk_num); - clk_writel(val, c->reg); - - return 0; -} - -static void tegra30_cml_clk_disable(struct clk_hw *hw) -{ - struct clk_tegra *c = to_clk_tegra(hw); - - u32 val = clk_readl(c->reg); - val &= ~(0x1 << c->u.periph.clk_num); - clk_writel(val, c->reg); -} - -struct clk_ops tegra_cml_clk_ops = { - .is_enabled = tegra30_cml_clk_is_enabled, - .enable = tegra30_cml_clk_enable, - .disable = tegra30_cml_clk_disable, - .recalc_rate = tegra30_clk_fixed_recalc_rate, -}; - -struct clk_ops tegra_pciex_clk_ops = { - .recalc_rate = tegra30_clk_fixed_recalc_rate, -}; - -/* Tegra30 CPU clock and reset control functions */ -static void tegra30_wait_cpu_in_reset(u32 cpu) -{ - unsigned int reg; - - do { - reg = readl(reg_clk_base + - TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS); - cpu_relax(); - } while (!(reg & (1 << cpu))); /* check CPU been reset or not */ - - return; -} - -static void tegra30_put_cpu_in_reset(u32 cpu) -{ - writel(CPU_RESET(cpu), - reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET); - dmb(); -} - -static void tegra30_cpu_out_of_reset(u32 cpu) -{ - writel(CPU_RESET(cpu), - reg_clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR); - wmb(); -} - -static void tegra30_enable_cpu_clock(u32 cpu) -{ - unsigned int reg; - - writel(CPU_CLOCK(cpu), - reg_clk_base + TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR); - reg = readl(reg_clk_base + - TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR); -} - -static void tegra30_disable_cpu_clock(u32 cpu) -{ - - unsigned int reg; - - reg = readl(reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX); - writel(reg | CPU_CLOCK(cpu), - reg_clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX); -} - -#ifdef CONFIG_PM_SLEEP -static bool tegra30_cpu_rail_off_ready(void) -{ - unsigned int cpu_rst_status; - int cpu_pwr_status; - - cpu_rst_status = readl(reg_clk_base + - TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS); - cpu_pwr_status = tegra_powergate_is_powered(TEGRA_POWERGATE_CPU1) || - tegra_powergate_is_powered(TEGRA_POWERGATE_CPU2) || - tegra_powergate_is_powered(TEGRA_POWERGATE_CPU3); - - if (((cpu_rst_status & 0xE) != 0xE) || cpu_pwr_status) - return false; - - return true; -} - -static void tegra30_cpu_clock_suspend(void) -{ - /* switch coresite to clk_m, save off original source */ - tegra30_cpu_clk_sctx.clk_csite_src = - readl(reg_clk_base + CLK_RESET_SOURCE_CSITE); - writel(3<<30, reg_clk_base + CLK_RESET_SOURCE_CSITE); - - tegra30_cpu_clk_sctx.cpu_burst = - readl(reg_clk_base + CLK_RESET_CCLK_BURST); - tegra30_cpu_clk_sctx.pllx_base = - readl(reg_clk_base + CLK_RESET_PLLX_BASE); - tegra30_cpu_clk_sctx.pllx_misc = - readl(reg_clk_base + CLK_RESET_PLLX_MISC); - tegra30_cpu_clk_sctx.cclk_divider = - readl(reg_clk_base + CLK_RESET_CCLK_DIVIDER); -} - -static void tegra30_cpu_clock_resume(void) -{ - unsigned int reg, policy; - - /* Is CPU complex already running on PLLX? */ - reg = readl(reg_clk_base + CLK_RESET_CCLK_BURST); - policy = (reg >> CLK_RESET_CCLK_BURST_POLICY_SHIFT) & 0xF; - - if (policy == CLK_RESET_CCLK_IDLE_POLICY) - reg = (reg >> CLK_RESET_CCLK_IDLE_POLICY_SHIFT) & 0xF; - else if (policy == CLK_RESET_CCLK_RUN_POLICY) - reg = (reg >> CLK_RESET_CCLK_RUN_POLICY_SHIFT) & 0xF; - else - BUG(); - - if (reg != CLK_RESET_CCLK_BURST_POLICY_PLLX) { - /* restore PLLX settings if CPU is on different PLL */ - writel(tegra30_cpu_clk_sctx.pllx_misc, - reg_clk_base + CLK_RESET_PLLX_MISC); - writel(tegra30_cpu_clk_sctx.pllx_base, - reg_clk_base + CLK_RESET_PLLX_BASE); - - /* wait for PLL stabilization if PLLX was enabled */ - if (tegra30_cpu_clk_sctx.pllx_base & (1 << 30)) - udelay(300); - } - - /* - * Restore original burst policy setting for calls resulting from CPU - * LP2 in idle or system suspend. - */ - writel(tegra30_cpu_clk_sctx.cclk_divider, - reg_clk_base + CLK_RESET_CCLK_DIVIDER); - writel(tegra30_cpu_clk_sctx.cpu_burst, - reg_clk_base + CLK_RESET_CCLK_BURST); - - writel(tegra30_cpu_clk_sctx.clk_csite_src, - reg_clk_base + CLK_RESET_SOURCE_CSITE); -} -#endif - -static struct tegra_cpu_car_ops tegra30_cpu_car_ops = { - .wait_for_reset = tegra30_wait_cpu_in_reset, - .put_in_reset = tegra30_put_cpu_in_reset, - .out_of_reset = tegra30_cpu_out_of_reset, - .enable_clock = tegra30_enable_cpu_clock, - .disable_clock = tegra30_disable_cpu_clock, -#ifdef CONFIG_PM_SLEEP - .rail_off_ready = tegra30_cpu_rail_off_ready, - .suspend = tegra30_cpu_clock_suspend, - .resume = tegra30_cpu_clock_resume, -#endif -}; - -void __init tegra30_cpu_car_ops_init(void) -{ - tegra_cpu_car_ops = &tegra30_cpu_car_ops; -} diff --git a/arch/arm/mach-tegra/tegra30_clocks.h b/arch/arm/mach-tegra/tegra30_clocks.h deleted file mode 100644 index 7a34adb..0000000 --- a/arch/arm/mach-tegra/tegra30_clocks.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __MACH_TEGRA30_CLOCK_H -#define __MACH_TEGRA30_CLOCK_H - -extern struct clk_ops tegra30_clk_32k_ops; -extern struct clk_ops tegra30_clk_m_ops; -extern struct clk_ops tegra_clk_m_div_ops; -extern struct clk_ops tegra_pll_ref_ops; -extern struct clk_ops tegra30_pll_ops; -extern struct clk_ops tegra30_pll_div_ops; -extern struct clk_ops tegra_plld_ops; -extern struct clk_ops tegra30_plle_ops; -extern struct clk_ops tegra_cml_clk_ops; -extern struct clk_ops tegra_pciex_clk_ops; -extern struct clk_ops tegra_sync_source_ops; -extern struct clk_ops tegra30_audio_sync_clk_ops; -extern struct clk_ops tegra30_clk_double_ops; -extern struct clk_ops tegra_clk_out_ops; -extern struct clk_ops tegra30_super_ops; -extern struct clk_ops tegra30_blink_clk_ops; -extern struct clk_ops tegra30_twd_ops; -extern struct clk_ops tegra30_bus_ops; -extern struct clk_ops tegra30_periph_clk_ops; -extern struct clk_ops tegra30_dsib_clk_ops; -extern struct clk_ops tegra_nand_clk_ops; -extern struct clk_ops tegra_vi_clk_ops; -extern struct clk_ops tegra_dtv_clk_ops; -extern struct clk_ops tegra_clk_shared_bus_ops; - -int tegra30_plld_clk_cfg_ex(struct clk_hw *hw, - enum tegra_clk_ex_param p, u32 setting); -void tegra30_periph_clk_reset(struct clk_hw *hw, bool assert); -int tegra30_vi_clk_cfg_ex(struct clk_hw *hw, - enum tegra_clk_ex_param p, u32 setting); -int tegra30_nand_clk_cfg_ex(struct clk_hw *hw, - enum tegra_clk_ex_param p, u32 setting); -int tegra30_dtv_clk_cfg_ex(struct clk_hw *hw, - enum tegra_clk_ex_param p, u32 setting); -#endif diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c deleted file mode 100644 index 6942c7a..0000000 --- a/arch/arm/mach-tegra/tegra30_clocks_data.c +++ /dev/null @@ -1,1425 +0,0 @@ -/* - * arch/arm/mach-tegra/tegra30_clocks.c - * - * Copyright (c) 2010-2012 NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - */ - -#include <linux/clk-private.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/list.h> -#include <linux/spinlock.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/cpufreq.h> - -#include "clock.h" -#include "fuse.h" -#include "tegra30_clocks.h" -#include "tegra_cpu_car.h" - -#define DEFINE_CLK_TEGRA(_name, _rate, _ops, _flags, \ - _parent_names, _parents, _parent) \ - static struct clk tegra_##_name = { \ - .hw = &tegra_##_name##_hw.hw, \ - .name = #_name, \ - .rate = _rate, \ - .ops = _ops, \ - .flags = _flags, \ - .parent_names = _parent_names, \ - .parents = _parents, \ - .num_parents = ARRAY_SIZE(_parent_names), \ - .parent = _parent, \ - }; - -static struct clk tegra_clk_32k; -static struct clk_tegra tegra_clk_32k_hw = { - .hw = { - .clk = &tegra_clk_32k, - }, - .fixed_rate = 32768, -}; -static struct clk tegra_clk_32k = { - .name = "clk_32k", - .hw = &tegra_clk_32k_hw.hw, - .ops = &tegra30_clk_32k_ops, - .flags = CLK_IS_ROOT, -}; - -static struct clk tegra_clk_m; -static struct clk_tegra tegra_clk_m_hw = { - .hw = { - .clk = &tegra_clk_m, - }, - .flags = ENABLE_ON_INIT, - .reg = 0x1fc, - .reg_shift = 28, - .max_rate = 48000000, -}; -static struct clk tegra_clk_m = { - .name = "clk_m", - .hw = &tegra_clk_m_hw.hw, - .ops = &tegra30_clk_m_ops, - .flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED, -}; - -static const char *clk_m_div_parent_names[] = { - "clk_m", -}; - -static struct clk *clk_m_div_parents[] = { - &tegra_clk_m, -}; - -static struct clk tegra_clk_m_div2; -static struct clk_tegra tegra_clk_m_div2_hw = { - .hw = { - .clk = &tegra_clk_m_div2, - }, - .mul = 1, - .div = 2, - .max_rate = 24000000, -}; -DEFINE_CLK_TEGRA(clk_m_div2, 0, &tegra_clk_m_div_ops, 0, - clk_m_div_parent_names, clk_m_div_parents, &tegra_clk_m); - -static struct clk tegra_clk_m_div4; -static struct clk_tegra tegra_clk_m_div4_hw = { - .hw = { - .clk = &tegra_clk_m_div4, - }, - .mul = 1, - .div = 4, - .max_rate = 12000000, -}; -DEFINE_CLK_TEGRA(clk_m_div4, 0, &tegra_clk_m_div_ops, 0, - clk_m_div_parent_names, clk_m_div_parents, &tegra_clk_m); - -static struct clk tegra_pll_ref; -static struct clk_tegra tegra_pll_ref_hw = { - .hw = { - .clk = &tegra_pll_ref, - }, - .flags = ENABLE_ON_INIT, - .max_rate = 26000000, -}; -DEFINE_CLK_TEGRA(pll_ref, 0, &tegra_pll_ref_ops, 0, clk_m_div_parent_names, - clk_m_div_parents, &tegra_clk_m); - -#define DEFINE_PLL(_name, _flags, _reg, _max_rate, _input_min, \ - _input_max, _cf_min, _cf_max, _vco_min, \ - _vco_max, _freq_table, _lock_delay, _ops, \ - _fixed_rate, _clk_cfg_ex, _parent) \ - static struct clk tegra_##_name; \ - static const char *_name##_parent_names[] = { \ - #_parent, \ - }; \ - static struct clk *_name##_parents[] = { \ - &tegra_##_parent, \ - }; \ - static struct clk_tegra tegra_##_name##_hw = { \ - .hw = { \ - .clk = &tegra_##_name, \ - }, \ - .flags = _flags, \ - .reg = _reg, \ - .max_rate = _max_rate, \ - .u.pll = { \ - .input_min = _input_min, \ - .input_max = _input_max, \ - .cf_min = _cf_min, \ - .cf_max = _cf_max, \ - .vco_min = _vco_min, \ - .vco_max = _vco_max, \ - .freq_table = _freq_table, \ - .lock_delay = _lock_delay, \ - .fixed_rate = _fixed_rate, \ - }, \ - .clk_cfg_ex = _clk_cfg_ex, \ - }; \ - DEFINE_CLK_TEGRA(_name, 0, &_ops, CLK_IGNORE_UNUSED, \ - _name##_parent_names, _name##_parents, \ - &tegra_##_parent); - -#define DEFINE_PLL_OUT(_name, _flags, _reg, _reg_shift, \ - _max_rate, _ops, _parent, _clk_flags) \ - static const char *_name##_parent_names[] = { \ - #_parent, \ - }; \ - static struct clk *_name##_parents[] = { \ - &tegra_##_parent, \ - }; \ - static struct clk tegra_##_name; \ - static struct clk_tegra tegra_##_name##_hw = { \ - .hw = { \ - .clk = &tegra_##_name, \ - }, \ - .flags = _flags, \ - .reg = _reg, \ - .max_rate = _max_rate, \ - .reg_shift = _reg_shift, \ - }; \ - DEFINE_CLK_TEGRA(_name, 0, &tegra30_pll_div_ops, \ - _clk_flags, _name##_parent_names, \ - _name##_parents, &tegra_##_parent); - -static struct clk_pll_freq_table tegra_pll_c_freq_table[] = { - { 12000000, 1040000000, 520, 6, 1, 8}, - { 13000000, 1040000000, 480, 6, 1, 8}, - { 16800000, 1040000000, 495, 8, 1, 8}, /* actual: 1039.5 MHz */ - { 19200000, 1040000000, 325, 6, 1, 6}, - { 26000000, 1040000000, 520, 13, 1, 8}, - - { 12000000, 832000000, 416, 6, 1, 8}, - { 13000000, 832000000, 832, 13, 1, 8}, - { 16800000, 832000000, 396, 8, 1, 8}, /* actual: 831.6 MHz */ - { 19200000, 832000000, 260, 6, 1, 8}, - { 26000000, 832000000, 416, 13, 1, 8}, - - { 12000000, 624000000, 624, 12, 1, 8}, - { 13000000, 624000000, 624, 13, 1, 8}, - { 16800000, 600000000, 520, 14, 1, 8}, - { 19200000, 624000000, 520, 16, 1, 8}, - { 26000000, 624000000, 624, 26, 1, 8}, - - { 12000000, 600000000, 600, 12, 1, 8}, - { 13000000, 600000000, 600, 13, 1, 8}, - { 16800000, 600000000, 500, 14, 1, 8}, - { 19200000, 600000000, 375, 12, 1, 6}, - { 26000000, 600000000, 600, 26, 1, 8}, - - { 12000000, 520000000, 520, 12, 1, 8}, - { 13000000, 520000000, 520, 13, 1, 8}, - { 16800000, 520000000, 495, 16, 1, 8}, /* actual: 519.75 MHz */ - { 19200000, 520000000, 325, 12, 1, 6}, - { 26000000, 520000000, 520, 26, 1, 8}, - - { 12000000, 416000000, 416, 12, 1, 8}, - { 13000000, 416000000, 416, 13, 1, 8}, - { 16800000, 416000000, 396, 16, 1, 8}, /* actual: 415.8 MHz */ - { 19200000, 416000000, 260, 12, 1, 6}, - { 26000000, 416000000, 416, 26, 1, 8}, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_c, PLL_HAS_CPCON, 0x80, 1400000000, 2000000, 31000000, 1000000, - 6000000, 20000000, 1400000000, tegra_pll_c_freq_table, 300, - tegra30_pll_ops, 0, NULL, pll_ref); - -DEFINE_PLL_OUT(pll_c_out1, DIV_U71, 0x84, 0, 700000000, - tegra30_pll_div_ops, pll_c, CLK_IGNORE_UNUSED); - -static struct clk_pll_freq_table tegra_pll_m_freq_table[] = { - { 12000000, 666000000, 666, 12, 1, 8}, - { 13000000, 666000000, 666, 13, 1, 8}, - { 16800000, 666000000, 555, 14, 1, 8}, - { 19200000, 666000000, 555, 16, 1, 8}, - { 26000000, 666000000, 666, 26, 1, 8}, - { 12000000, 600000000, 600, 12, 1, 8}, - { 13000000, 600000000, 600, 13, 1, 8}, - { 16800000, 600000000, 500, 14, 1, 8}, - { 19200000, 600000000, 375, 12, 1, 6}, - { 26000000, 600000000, 600, 26, 1, 8}, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_m, PLL_HAS_CPCON | PLLM, 0x90, 800000000, 2000000, 31000000, - 1000000, 6000000, 20000000, 1200000000, tegra_pll_m_freq_table, - 300, tegra30_pll_ops, 0, NULL, pll_ref); - -DEFINE_PLL_OUT(pll_m_out1, DIV_U71, 0x94, 0, 600000000, - tegra30_pll_div_ops, pll_m, CLK_IGNORE_UNUSED); - -static struct clk_pll_freq_table tegra_pll_p_freq_table[] = { - { 12000000, 216000000, 432, 12, 2, 8}, - { 13000000, 216000000, 432, 13, 2, 8}, - { 16800000, 216000000, 360, 14, 2, 8}, - { 19200000, 216000000, 360, 16, 2, 8}, - { 26000000, 216000000, 432, 26, 2, 8}, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_p, ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON, 0xa0, 432000000, - 2000000, 31000000, 1000000, 6000000, 20000000, 1400000000, - tegra_pll_p_freq_table, 300, tegra30_pll_ops, 408000000, NULL, - pll_ref); - -DEFINE_PLL_OUT(pll_p_out1, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4, - 0, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED); -DEFINE_PLL_OUT(pll_p_out2, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa4, - 16, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED); -DEFINE_PLL_OUT(pll_p_out3, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8, - 0, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED); -DEFINE_PLL_OUT(pll_p_out4, ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED, 0xa8, - 16, 432000000, tegra30_pll_div_ops, pll_p, CLK_IGNORE_UNUSED); - -static struct clk_pll_freq_table tegra_pll_a_freq_table[] = { - { 9600000, 564480000, 294, 5, 1, 4}, - { 9600000, 552960000, 288, 5, 1, 4}, - { 9600000, 24000000, 5, 2, 1, 1}, - - { 28800000, 56448000, 49, 25, 1, 1}, - { 28800000, 73728000, 64, 25, 1, 1}, - { 28800000, 24000000, 5, 6, 1, 1}, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_a, PLL_HAS_CPCON, 0xb0, 700000000, 2000000, 31000000, 1000000, - 6000000, 20000000, 1400000000, tegra_pll_a_freq_table, - 300, tegra30_pll_ops, 0, NULL, pll_p_out1); - -DEFINE_PLL_OUT(pll_a_out0, DIV_U71, 0xb4, 0, 100000000, tegra30_pll_div_ops, - pll_a, CLK_IGNORE_UNUSED); - -static struct clk_pll_freq_table tegra_pll_d_freq_table[] = { - { 12000000, 216000000, 216, 12, 1, 4}, - { 13000000, 216000000, 216, 13, 1, 4}, - { 16800000, 216000000, 180, 14, 1, 4}, - { 19200000, 216000000, 180, 16, 1, 4}, - { 26000000, 216000000, 216, 26, 1, 4}, - - { 12000000, 594000000, 594, 12, 1, 8}, - { 13000000, 594000000, 594, 13, 1, 8}, - { 16800000, 594000000, 495, 14, 1, 8}, - { 19200000, 594000000, 495, 16, 1, 8}, - { 26000000, 594000000, 594, 26, 1, 8}, - - { 12000000, 1000000000, 1000, 12, 1, 12}, - { 13000000, 1000000000, 1000, 13, 1, 12}, - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 12}, - - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_d, PLL_HAS_CPCON | PLLD, 0xd0, 1000000000, 2000000, 40000000, - 1000000, 6000000, 40000000, 1000000000, tegra_pll_d_freq_table, - 1000, tegra30_pll_ops, 0, tegra30_plld_clk_cfg_ex, pll_ref); - -DEFINE_PLL_OUT(pll_d_out0, DIV_2 | PLLD, 0, 0, 500000000, tegra30_pll_div_ops, - pll_d, CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED); - -DEFINE_PLL(pll_d2, PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLD, 0x4b8, 1000000000, - 2000000, 40000000, 1000000, 6000000, 40000000, 1000000000, - tegra_pll_d_freq_table, 1000, tegra30_pll_ops, 0, NULL, - pll_ref); - -DEFINE_PLL_OUT(pll_d2_out0, DIV_2 | PLLD, 0, 0, 500000000, tegra30_pll_div_ops, - pll_d2, CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED); - -static struct clk_pll_freq_table tegra_pll_u_freq_table[] = { - { 12000000, 480000000, 960, 12, 2, 12}, - { 13000000, 480000000, 960, 13, 2, 12}, - { 16800000, 480000000, 400, 7, 2, 5}, - { 19200000, 480000000, 200, 4, 2, 3}, - { 26000000, 480000000, 960, 26, 2, 12}, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_u, PLL_HAS_CPCON | PLLU, 0xc0, 480000000, 2000000, 40000000, - 1000000, 6000000, 48000000, 960000000, tegra_pll_u_freq_table, - 1000, tegra30_pll_ops, 0, NULL, pll_ref); - -static struct clk_pll_freq_table tegra_pll_x_freq_table[] = { - /* 1.7 GHz */ - { 12000000, 1700000000, 850, 6, 1, 8}, - { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */ - { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */ - { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */ - { 26000000, 1700000000, 850, 13, 1, 8}, - - /* 1.6 GHz */ - { 12000000, 1600000000, 800, 6, 1, 8}, - { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */ - { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */ - { 19200000, 1600000000, 500, 6, 1, 8}, - { 26000000, 1600000000, 800, 13, 1, 8}, - - /* 1.5 GHz */ - { 12000000, 1500000000, 750, 6, 1, 8}, - { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */ - { 16800000, 1500000000, 625, 7, 1, 8}, - { 19200000, 1500000000, 625, 8, 1, 8}, - { 26000000, 1500000000, 750, 13, 1, 8}, - - /* 1.4 GHz */ - { 12000000, 1400000000, 700, 6, 1, 8}, - { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */ - { 16800000, 1400000000, 1000, 12, 1, 8}, - { 19200000, 1400000000, 875, 12, 1, 8}, - { 26000000, 1400000000, 700, 13, 1, 8}, - - /* 1.3 GHz */ - { 12000000, 1300000000, 975, 9, 1, 8}, - { 13000000, 1300000000, 1000, 10, 1, 8}, - { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */ - { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */ - { 26000000, 1300000000, 650, 13, 1, 8}, - - /* 1.2 GHz */ - { 12000000, 1200000000, 1000, 10, 1, 8}, - { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */ - { 16800000, 1200000000, 1000, 14, 1, 8}, - { 19200000, 1200000000, 1000, 16, 1, 8}, - { 26000000, 1200000000, 600, 13, 1, 8}, - - /* 1.1 GHz */ - { 12000000, 1100000000, 825, 9, 1, 8}, - { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */ - { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */ - { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */ - { 26000000, 1100000000, 550, 13, 1, 8}, - - /* 1 GHz */ - { 12000000, 1000000000, 1000, 12, 1, 8}, - { 13000000, 1000000000, 1000, 13, 1, 8}, - { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */ - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 8}, - - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_x, PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLX, 0xe0, 1700000000, - 2000000, 31000000, 1000000, 6000000, 20000000, 1700000000, - tegra_pll_x_freq_table, 300, tegra30_pll_ops, 0, NULL, pll_ref); - -DEFINE_PLL_OUT(pll_x_out0, DIV_2 | PLLX, 0, 0, 850000000, tegra30_pll_div_ops, - pll_x, CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED); - -static struct clk_pll_freq_table tegra_pll_e_freq_table[] = { - /* PLLE special case: use cpcon field to store cml divider value */ - { 12000000, 100000000, 150, 1, 18, 11}, - { 216000000, 100000000, 200, 18, 24, 13}, - { 0, 0, 0, 0, 0, 0 }, -}; - -DEFINE_PLL(pll_e, PLL_ALT_MISC_REG, 0xe8, 100000000, 2000000, 216000000, - 12000000, 12000000, 1200000000, 2400000000U, - tegra_pll_e_freq_table, 300, tegra30_plle_ops, 100000000, NULL, - pll_ref); - -static const char *mux_plle[] = { - "pll_e", -}; - -static struct clk *mux_plle_p[] = { - &tegra_pll_e, -}; - -static struct clk tegra_cml0; -static struct clk_tegra tegra_cml0_hw = { - .hw = { - .clk = &tegra_cml0, - }, - .reg = 0x48c, - .fixed_rate = 100000000, - .u.periph = { - .clk_num = 0, - }, -}; -DEFINE_CLK_TEGRA(cml0, 0, &tegra_cml_clk_ops, 0, mux_plle, - mux_plle_p, &tegra_pll_e); - -static struct clk tegra_cml1; -static struct clk_tegra tegra_cml1_hw = { - .hw = { - .clk = &tegra_cml1, - }, - .reg = 0x48c, - .fixed_rate = 100000000, - .u.periph = { - .clk_num = 1, - }, -}; -DEFINE_CLK_TEGRA(cml1, 0, &tegra_cml_clk_ops, 0, mux_plle, - mux_plle_p, &tegra_pll_e); - -static struct clk tegra_pciex; -static struct clk_tegra tegra_pciex_hw = { - .hw = { - .clk = &tegra_pciex, - }, - .reg = 0x48c, - .fixed_rate = 100000000, - .reset = tegra30_periph_clk_reset, - .u.periph = { - .clk_num = 74, - }, -}; -DEFINE_CLK_TEGRA(pciex, 0, &tegra_pciex_clk_ops, 0, mux_plle, - mux_plle_p, &tegra_pll_e); - -#define SYNC_SOURCE(_name) \ - static struct clk tegra_##_name##_sync; \ - static struct clk_tegra tegra_##_name##_sync_hw = { \ - .hw = { \ - .clk = &tegra_##_name##_sync, \ - }, \ - .max_rate = 24000000, \ - .fixed_rate = 24000000, \ - }; \ - static struct clk tegra_##_name##_sync = { \ - .name = #_name "_sync", \ - .hw = &tegra_##_name##_sync_hw.hw, \ - .ops = &tegra_sync_source_ops, \ - .flags = CLK_IS_ROOT, \ - }; - -SYNC_SOURCE(spdif_in); -SYNC_SOURCE(i2s0); -SYNC_SOURCE(i2s1); -SYNC_SOURCE(i2s2); -SYNC_SOURCE(i2s3); -SYNC_SOURCE(i2s4); -SYNC_SOURCE(vimclk); - -static struct clk *tegra_sync_source_list[] = { - &tegra_spdif_in_sync, - &tegra_i2s0_sync, - &tegra_i2s1_sync, - &tegra_i2s2_sync, - &tegra_i2s3_sync, - &tegra_i2s4_sync, - &tegra_vimclk_sync, -}; - -static const char *mux_audio_sync_clk[] = { - "spdif_in_sync", - "i2s0_sync", - "i2s1_sync", - "i2s2_sync", - "i2s3_sync", - "i2s4_sync", - "vimclk_sync", -}; - -#define AUDIO_SYNC_CLK(_name, _index) \ - static struct clk tegra_##_name; \ - static struct clk_tegra tegra_##_name##_hw = { \ - .hw = { \ - .clk = &tegra_##_name, \ - }, \ - .max_rate = 24000000, \ - .reg = 0x4A0 + (_index) * 4, \ - }; \ - static struct clk tegra_##_name = { \ - .name = #_name, \ - .ops = &tegra30_audio_sync_clk_ops, \ - .hw = &tegra_##_name##_hw.hw, \ - .parent_names = mux_audio_sync_clk, \ - .parents = tegra_sync_source_list, \ - .num_parents = ARRAY_SIZE(mux_audio_sync_clk), \ - }; - -AUDIO_SYNC_CLK(audio0, 0); -AUDIO_SYNC_CLK(audio1, 1); -AUDIO_SYNC_CLK(audio2, 2); -AUDIO_SYNC_CLK(audio3, 3); -AUDIO_SYNC_CLK(audio4, 4); -AUDIO_SYNC_CLK(audio5, 5); - -static struct clk *tegra_clk_audio_list[] = { - &tegra_audio0, - &tegra_audio1, - &tegra_audio2, - &tegra_audio3, - &tegra_audio4, - &tegra_audio5, /* SPDIF */ -}; - -#define AUDIO_SYNC_2X_CLK(_name, _index) \ - static const char *_name##_parent_names[] = { \ - "tegra_" #_name, \ - }; \ - static struct clk *_name##_parents[] = { \ - &tegra_##_name, \ - }; \ - static struct clk tegra_##_name##_2x; \ - static struct clk_tegra tegra_##_name##_2x_hw = { \ - .hw = { \ - .clk = &tegra_##_name##_2x, \ - }, \ - .flags = PERIPH_NO_RESET, \ - .max_rate = 48000000, \ - .reg = 0x49C, \ - .reg_shift = 24 + (_index), \ - .u.periph = { \ - .clk_num = 113 + (_index), \ - }, \ - }; \ - static struct clk tegra_##_name##_2x = { \ - .name = #_name "_2x", \ - .ops = &tegra30_clk_double_ops, \ - .hw = &tegra_##_name##_2x_hw.hw, \ - .parent_names = _name##_parent_names, \ - .parents = _name##_parents, \ - .parent = &tegra_##_name, \ - .num_parents = 1, \ - }; - -AUDIO_SYNC_2X_CLK(audio0, 0); -AUDIO_SYNC_2X_CLK(audio1, 1); -AUDIO_SYNC_2X_CLK(audio2, 2); -AUDIO_SYNC_2X_CLK(audio3, 3); -AUDIO_SYNC_2X_CLK(audio4, 4); -AUDIO_SYNC_2X_CLK(audio5, 5); /* SPDIF */ - -static struct clk *tegra_clk_audio_2x_list[] = { - &tegra_audio0_2x, - &tegra_audio1_2x, - &tegra_audio2_2x, - &tegra_audio3_2x, - &tegra_audio4_2x, - &tegra_audio5_2x, /* SPDIF */ -}; - -#define MUX_I2S_SPDIF(_id) \ -static const char *mux_pllaout0_##_id##_2x_pllp_clkm[] = { \ - "pll_a_out0", \ - #_id "_2x", \ - "pll_p", \ - "clk_m", \ -}; \ -static struct clk *mux_pllaout0_##_id##_2x_pllp_clkm_p[] = { \ - &tegra_pll_a_out0, \ - &tegra_##_id##_2x, \ - &tegra_pll_p, \ - &tegra_clk_m, \ -}; - -MUX_I2S_SPDIF(audio0); -MUX_I2S_SPDIF(audio1); -MUX_I2S_SPDIF(audio2); -MUX_I2S_SPDIF(audio3); -MUX_I2S_SPDIF(audio4); -MUX_I2S_SPDIF(audio5); /* SPDIF */ - -static struct clk tegra_extern1; -static struct clk tegra_extern2; -static struct clk tegra_extern3; - -/* External clock outputs (through PMC) */ -#define MUX_EXTERN_OUT(_id) \ -static const char *mux_clkm_clkm2_clkm4_extern##_id[] = { \ - "clk_m", \ - "clk_m_div2", \ - "clk_m_div4", \ - "extern" #_id, \ -}; \ -static struct clk *mux_clkm_clkm2_clkm4_extern##_id##_p[] = { \ - &tegra_clk_m, \ - &tegra_clk_m_div2, \ - &tegra_clk_m_div4, \ - &tegra_extern##_id, \ -}; - -MUX_EXTERN_OUT(1); -MUX_EXTERN_OUT(2); -MUX_EXTERN_OUT(3); - -#define CLK_OUT_CLK(_name, _index) \ - static struct clk tegra_##_name; \ - static struct clk_tegra tegra_##_name##_hw = { \ - .hw = { \ - .clk = &tegra_##_name, \ - }, \ - .lookup = { \ - .dev_id = #_name, \ - .con_id = "extern" #_index, \ - }, \ - .flags = MUX_CLK_OUT, \ - .fixed_rate = 216000000, \ - .reg = 0x1a8, \ - .u.periph = { \ - .clk_num = (_index - 1) * 8 + 2, \ - }, \ - }; \ - static struct clk tegra_##_name = { \ - .name = #_name, \ - .ops = &tegra_clk_out_ops, \ - .hw = &tegra_##_name##_hw.hw, \ - .parent_names = mux_clkm_clkm2_clkm4_extern##_index, \ - .parents = mux_clkm_clkm2_clkm4_extern##_index##_p, \ - .num_parents = ARRAY_SIZE(mux_clkm_clkm2_clkm4_extern##_index),\ - }; - -CLK_OUT_CLK(clk_out_1, 1); -CLK_OUT_CLK(clk_out_2, 2); -CLK_OUT_CLK(clk_out_3, 3); - -static struct clk *tegra_clk_out_list[] = { - &tegra_clk_out_1, - &tegra_clk_out_2, - &tegra_clk_out_3, -}; - -static const char *mux_sclk[] = { - "clk_m", - "pll_c_out1", - "pll_p_out4", - "pll_p_out3", - "pll_p_out2", - "dummy", - "clk_32k", - "pll_m_out1", -}; - -static struct clk *mux_sclk_p[] = { - &tegra_clk_m, - &tegra_pll_c_out1, - &tegra_pll_p_out4, - &tegra_pll_p_out3, - &tegra_pll_p_out2, - NULL, - &tegra_clk_32k, - &tegra_pll_m_out1, -}; - -static struct clk tegra_clk_sclk; -static struct clk_tegra tegra_clk_sclk_hw = { - .hw = { - .clk = &tegra_clk_sclk, - }, - .reg = 0x28, - .max_rate = 334000000, - .min_rate = 40000000, -}; - -static struct clk tegra_clk_sclk = { - .name = "sclk", - .ops = &tegra30_super_ops, - .hw = &tegra_clk_sclk_hw.hw, - .parent_names = mux_sclk, - .parents = mux_sclk_p, - .num_parents = ARRAY_SIZE(mux_sclk), -}; - -static const char *tegra_hclk_parent_names[] = { - "tegra_sclk", -}; - -static struct clk *tegra_hclk_parents[] = { - &tegra_clk_sclk, -}; - -static struct clk tegra_hclk; -static struct clk_tegra tegra_hclk_hw = { - .hw = { - .clk = &tegra_hclk, - }, - .flags = DIV_BUS, - .reg = 0x30, - .reg_shift = 4, - .max_rate = 378000000, - .min_rate = 12000000, -}; -DEFINE_CLK_TEGRA(hclk, 0, &tegra30_bus_ops, 0, tegra_hclk_parent_names, - tegra_hclk_parents, &tegra_clk_sclk); - -static const char *tegra_pclk_parent_names[] = { - "tegra_hclk", -}; - -static struct clk *tegra_pclk_parents[] = { - &tegra_hclk, -}; - -static struct clk tegra_pclk; -static struct clk_tegra tegra_pclk_hw = { - .hw = { - .clk = &tegra_pclk, - }, - .flags = DIV_BUS, - .reg = 0x30, - .reg_shift = 0, - .max_rate = 167000000, - .min_rate = 12000000, -}; -DEFINE_CLK_TEGRA(pclk, 0, &tegra30_bus_ops, 0, tegra_pclk_parent_names, - tegra_pclk_parents, &tegra_hclk); - -static const char *mux_blink[] = { - "clk_32k", -}; - -static struct clk *mux_blink_p[] = { - &tegra_clk_32k, -}; - -static struct clk tegra_clk_blink; -static struct clk_tegra tegra_clk_blink_hw = { - .hw = { - .clk = &tegra_clk_blink, - }, - .reg = 0x40, - .max_rate = 32768, -}; -static struct clk tegra_clk_blink = { - .name = "blink", - .ops = &tegra30_blink_clk_ops, - .hw = &tegra_clk_blink_hw.hw, - .parent = &tegra_clk_32k, - .parent_names = mux_blink, - .parents = mux_blink_p, - .num_parents = ARRAY_SIZE(mux_blink), -}; - -static const char *mux_pllm_pllc_pllp_plla[] = { - "pll_m", - "pll_c", - "pll_p", - "pll_a_out0", -}; - -static const char *mux_pllp_pllc_pllm_clkm[] = { - "pll_p", - "pll_c", - "pll_m", - "clk_m", -}; - -static const char *mux_pllp_clkm[] = { - "pll_p", - "dummy", - "dummy", - "clk_m", -}; - -static const char *mux_pllp_plld_pllc_clkm[] = { - "pll_p", - "pll_d_out0", - "pll_c", - "clk_m", -}; - -static const char *mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = { - "pll_p", - "pll_m", - "pll_d_out0", - "pll_a_out0", - "pll_c", - "pll_d2_out0", - "clk_m", -}; - -static const char *mux_plla_pllc_pllp_clkm[] = { - "pll_a_out0", - "dummy", - "pll_p", - "clk_m" -}; - -static const char *mux_pllp_pllc_clk32_clkm[] = { - "pll_p", - "pll_c", - "clk_32k", - "clk_m", -}; - -static const char *mux_pllp_pllc_clkm_clk32[] = { - "pll_p", - "pll_c", - "clk_m", - "clk_32k", -}; - -static const char *mux_pllp_pllc_pllm[] = { - "pll_p", - "pll_c", - "pll_m", -}; - -static const char *mux_clk_m[] = { - "clk_m", -}; - -static const char *mux_pllp_out3[] = { - "pll_p_out3", -}; - -static const char *mux_plld_out0[] = { - "pll_d_out0", -}; - -static const char *mux_plld_out0_plld2_out0[] = { - "pll_d_out0", - "pll_d2_out0", -}; - -static const char *mux_clk_32k[] = { - "clk_32k", -}; - -static const char *mux_plla_clk32_pllp_clkm_plle[] = { - "pll_a_out0", - "clk_32k", - "pll_p", - "clk_m", - "pll_e", -}; - -static const char *mux_cclk_g[] = { - "clk_m", - "pll_c", - "clk_32k", - "pll_m", - "pll_p", - "pll_p_out4", - "pll_p_out3", - "dummy", - "pll_x", -}; - -static struct clk *mux_pllm_pllc_pllp_plla_p[] = { - &tegra_pll_m, - &tegra_pll_c, - &tegra_pll_p, - &tegra_pll_a_out0, -}; - -static struct clk *mux_pllp_pllc_pllm_clkm_p[] = { - &tegra_pll_p, - &tegra_pll_c, - &tegra_pll_m, - &tegra_clk_m, -}; - -static struct clk *mux_pllp_clkm_p[] = { - &tegra_pll_p, - NULL, - NULL, - &tegra_clk_m, -}; - -static struct clk *mux_pllp_plld_pllc_clkm_p[] = { - &tegra_pll_p, - &tegra_pll_d_out0, - &tegra_pll_c, - &tegra_clk_m, -}; - -static struct clk *mux_pllp_pllm_plld_plla_pllc_plld2_clkm_p[] = { - &tegra_pll_p, - &tegra_pll_m, - &tegra_pll_d_out0, - &tegra_pll_a_out0, - &tegra_pll_c, - &tegra_pll_d2_out0, - &tegra_clk_m, -}; - -static struct clk *mux_plla_pllc_pllp_clkm_p[] = { - &tegra_pll_a_out0, - NULL, - &tegra_pll_p, - &tegra_clk_m, -}; - -static struct clk *mux_pllp_pllc_clk32_clkm_p[] = { - &tegra_pll_p, - &tegra_pll_c, - &tegra_clk_32k, - &tegra_clk_m, -}; - -static struct clk *mux_pllp_pllc_clkm_clk32_p[] = { - &tegra_pll_p, - &tegra_pll_c, - &tegra_clk_m, - &tegra_clk_32k, -}; - -static struct clk *mux_pllp_pllc_pllm_p[] = { - &tegra_pll_p, - &tegra_pll_c, - &tegra_pll_m, -}; - -static struct clk *mux_clk_m_p[] = { - &tegra_clk_m, -}; - -static struct clk *mux_pllp_out3_p[] = { - &tegra_pll_p_out3, -}; - -static struct clk *mux_plld_out0_p[] = { - &tegra_pll_d_out0, -}; - -static struct clk *mux_plld_out0_plld2_out0_p[] = { - &tegra_pll_d_out0, - &tegra_pll_d2_out0, -}; - -static struct clk *mux_clk_32k_p[] = { - &tegra_clk_32k, -}; - -static struct clk *mux_plla_clk32_pllp_clkm_plle_p[] = { - &tegra_pll_a_out0, - &tegra_clk_32k, - &tegra_pll_p, - &tegra_clk_m, - &tegra_pll_e, -}; - -static struct clk *mux_cclk_g_p[] = { - &tegra_clk_m, - &tegra_pll_c, - &tegra_clk_32k, - &tegra_pll_m, - &tegra_pll_p, - &tegra_pll_p_out4, - &tegra_pll_p_out3, - NULL, - &tegra_pll_x, -}; - -static struct clk tegra_clk_cclk_g; -static struct clk_tegra tegra_clk_cclk_g_hw = { - .hw = { - .clk = &tegra_clk_cclk_g, - }, - .flags = DIV_U71 | DIV_U71_INT, - .reg = 0x368, - .max_rate = 1700000000, -}; -static struct clk tegra_clk_cclk_g = { - .name = "cclk_g", - .ops = &tegra30_super_ops, - .hw = &tegra_clk_cclk_g_hw.hw, - .parent_names = mux_cclk_g, - .parents = mux_cclk_g_p, - .num_parents = ARRAY_SIZE(mux_cclk_g), -}; - -static const char *mux_twd[] = { - "cclk_g", -}; - -static struct clk *mux_twd_p[] = { - &tegra_clk_cclk_g, -}; - -static struct clk tegra30_clk_twd; -static struct clk_tegra tegra30_clk_twd_hw = { - .hw = { - .clk = &tegra30_clk_twd, - }, - .max_rate = 1400000000, - .mul = 1, - .div = 2, -}; - -static struct clk tegra30_clk_twd = { - .name = "twd", - .ops = &tegra30_twd_ops, - .hw = &tegra30_clk_twd_hw.hw, - .parent = &tegra_clk_cclk_g, - .parent_names = mux_twd, - .parents = mux_twd_p, - .num_parents = ARRAY_SIZE(mux_twd), -}; - -#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, \ - _max, _inputs, _flags) \ - static struct clk tegra_##_name; \ - static struct clk_tegra tegra_##_name##_hw = { \ - .hw = { \ - .clk = &tegra_##_name, \ - }, \ - .lookup = { \ - .dev_id = _dev, \ - .con_id = _con, \ - }, \ - .reg = _reg, \ - .flags = _flags, \ - .max_rate = _max, \ - .u.periph = { \ - .clk_num = _clk_num, \ - }, \ - .reset = &tegra30_periph_clk_reset, \ - }; \ - static struct clk tegra_##_name = { \ - .name = #_name, \ - .ops = &tegra30_periph_clk_ops, \ - .hw = &tegra_##_name##_hw.hw, \ - .parent_names = _inputs, \ - .parents = _inputs##_p, \ - .num_parents = ARRAY_SIZE(_inputs), \ - }; - -PERIPH_CLK(apbdma, "tegra-apbdma", NULL, 34, 0, 26000000, mux_clk_m, 0); -PERIPH_CLK(rtc, "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB); -PERIPH_CLK(kbc, "tegra-kbc", NULL, 36, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB); -PERIPH_CLK(timer, "timer", NULL, 5, 0, 26000000, mux_clk_m, 0); -PERIPH_CLK(kfuse, "kfuse-tegra", NULL, 40, 0, 26000000, mux_clk_m, 0); -PERIPH_CLK(fuse, "fuse-tegra", "fuse", 39, 0, 26000000, mux_clk_m, PERIPH_ON_APB); -PERIPH_CLK(fuse_burn, "fuse-tegra", "fuse_burn", 39, 0, 26000000, mux_clk_m, PERIPH_ON_APB); -PERIPH_CLK(apbif, "tegra30-ahub", "apbif", 107, 0, 26000000, mux_clk_m, 0); -PERIPH_CLK(i2s0, "tegra30-i2s.0", NULL, 30, 0x1d8, 26000000, mux_pllaout0_audio0_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(i2s1, "tegra30-i2s.1", NULL, 11, 0x100, 26000000, mux_pllaout0_audio1_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(i2s2, "tegra30-i2s.2", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(i2s3, "tegra30-i2s.3", NULL, 101, 0x3bc, 26000000, mux_pllaout0_audio3_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(i2s4, "tegra30-i2s.4", NULL, 102, 0x3c0, 26000000, mux_pllaout0_audio4_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(spdif_out, "tegra30-spdif", "spdif_out", 10, 0x108, 100000000, mux_pllaout0_audio5_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(spdif_in, "tegra30-spdif", "spdif_in", 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(pwm, "tegra-pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_clk32_clkm, MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(d_audio, "tegra30-ahub", "d_audio", 106, 0x3d0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71); -PERIPH_CLK(dam0, "tegra30-dam.0", NULL, 108, 0x3d8, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71); -PERIPH_CLK(dam1, "tegra30-dam.1", NULL, 109, 0x3dc, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71); -PERIPH_CLK(dam2, "tegra30-dam.2", NULL, 110, 0x3e0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71); -PERIPH_CLK(hda, "tegra30-hda", "hda", 125, 0x428, 108000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(hda2codec_2x, "tegra30-hda", "hda2codec", 111, 0x3e4, 48000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(hda2hdmi, "tegra30-hda", "hda2hdmi", 128, 0, 48000000, mux_clk_m, 0); -PERIPH_CLK(sbc1, "spi_tegra.0", NULL, 41, 0x134, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(sbc2, "spi_tegra.1", NULL, 44, 0x118, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(sbc3, "spi_tegra.2", NULL, 46, 0x11c, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(sbc4, "spi_tegra.3", NULL, 68, 0x1b4, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(sbc5, "spi_tegra.4", NULL, 104, 0x3c8, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(sbc6, "spi_tegra.5", NULL, 105, 0x3cc, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(sata_oob, "tegra_sata_oob", NULL, 123, 0x420, 216000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(sata, "tegra_sata", NULL, 124, 0x424, 216000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(sata_cold, "tegra_sata_cold", NULL, 129, 0, 48000000, mux_clk_m, 0); -PERIPH_CLK(ndflash, "tegra_nand", NULL, 13, 0x160, 240000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(ndspeed, "tegra_nand_speed", NULL, 80, 0x3f8, 240000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(vfir, "vfir", NULL, 7, 0x168, 72000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(sdmmc1, "sdhci-tegra.0", NULL, 14, 0x150, 208000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */ -PERIPH_CLK(sdmmc2, "sdhci-tegra.1", NULL, 9, 0x154, 104000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */ -PERIPH_CLK(sdmmc3, "sdhci-tegra.2", NULL, 69, 0x1bc, 208000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */ -PERIPH_CLK(sdmmc4, "sdhci-tegra.3", NULL, 15, 0x164, 104000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */ -PERIPH_CLK(vcp, "tegra-avp", "vcp", 29, 0, 250000000, mux_clk_m, 0); -PERIPH_CLK(bsea, "tegra-avp", "bsea", 62, 0, 250000000, mux_clk_m, 0); -PERIPH_CLK(bsev, "tegra-aes", "bsev", 63, 0, 250000000, mux_clk_m, 0); -PERIPH_CLK(vde, "vde", NULL, 61, 0x1c8, 520000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_INT); -PERIPH_CLK(csite, "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* max rate ??? */ -PERIPH_CLK(la, "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); -PERIPH_CLK(owr, "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(nor, "nor", NULL, 42, 0x1d0, 127000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* requires min voltage */ -PERIPH_CLK(mipi, "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); /* scales with voltage */ -PERIPH_CLK(i2c1, "tegra-i2c.0", "div-clk", 12, 0x124, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB); -PERIPH_CLK(i2c2, "tegra-i2c.1", "div-clk", 54, 0x198, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB); -PERIPH_CLK(i2c3, "tegra-i2c.2", "div-clk", 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB); -PERIPH_CLK(i2c4, "tegra-i2c.3", "div-clk", 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB); -PERIPH_CLK(i2c5, "tegra-i2c.4", "div-clk", 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB); -PERIPH_CLK(uarta, "tegra-uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB); -PERIPH_CLK(uartb, "tegra-uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB); -PERIPH_CLK(uartc, "tegra-uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB); -PERIPH_CLK(uartd, "tegra-uart.3", NULL, 65, 0x1c0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB); -PERIPH_CLK(uarte, "tegra-uart.4", NULL, 66, 0x1c4, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB); -PERIPH_CLK(vi, "tegra_camera", "vi", 20, 0x148, 425000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT); -PERIPH_CLK(3d, "3d", NULL, 24, 0x158, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET); -PERIPH_CLK(3d2, "3d2", NULL, 98, 0x3b0, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET); -PERIPH_CLK(2d, "2d", NULL, 21, 0x15c, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE); -PERIPH_CLK(vi_sensor, "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET); -PERIPH_CLK(epp, "epp", NULL, 19, 0x16c, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT); -PERIPH_CLK(mpe, "mpe", NULL, 60, 0x170, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT); -PERIPH_CLK(host1x, "host1x", NULL, 28, 0x180, 260000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT); -PERIPH_CLK(cve, "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */ -PERIPH_CLK(tvo, "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */ -PERIPH_CLK(dtv, "dtv", NULL, 79, 0x1dc, 250000000, mux_clk_m, 0); -PERIPH_CLK(hdmi, "hdmi", NULL, 51, 0x18c, 148500000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8 | DIV_U71); -PERIPH_CLK(tvdac, "tvdac", NULL, 53, 0x194, 220000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */ -PERIPH_CLK(disp1, "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8); -PERIPH_CLK(disp2, "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8); -PERIPH_CLK(usbd, "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0); /* requires min voltage */ -PERIPH_CLK(usb2, "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0); /* requires min voltage */ -PERIPH_CLK(usb3, "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0); /* requires min voltage */ -PERIPH_CLK(dsia, "tegradc.0", "dsia", 48, 0, 500000000, mux_plld_out0, 0); -PERIPH_CLK(csi, "tegra_camera", "csi", 52, 0, 102000000, mux_pllp_out3, 0); -PERIPH_CLK(isp, "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0); /* same frequency as VI */ -PERIPH_CLK(csus, "tegra_camera", "csus", 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET); -PERIPH_CLK(tsensor, "tegra-tsensor", NULL, 100, 0x3b8, 216000000, mux_pllp_pllc_clkm_clk32, MUX | DIV_U71); -PERIPH_CLK(actmon, "actmon", NULL, 119, 0x3e8, 216000000, mux_pllp_pllc_clk32_clkm, MUX | DIV_U71); -PERIPH_CLK(extern1, "extern1", NULL, 120, 0x3ec, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71); -PERIPH_CLK(extern2, "extern2", NULL, 121, 0x3f0, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71); -PERIPH_CLK(extern3, "extern3", NULL, 122, 0x3f4, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71); -PERIPH_CLK(i2cslow, "i2cslow", NULL, 81, 0x3fc, 26000000, mux_pllp_pllc_clk32_clkm, MUX | DIV_U71 | PERIPH_ON_APB); -PERIPH_CLK(pcie, "tegra-pcie", "pcie", 70, 0, 250000000, mux_clk_m, 0); -PERIPH_CLK(afi, "tegra-pcie", "afi", 72, 0, 250000000, mux_clk_m, 0); -PERIPH_CLK(se, "se", NULL, 127, 0x42c, 520000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_INT); - -static struct clk tegra_dsib; -static struct clk_tegra tegra_dsib_hw = { - .hw = { - .clk = &tegra_dsib, - }, - .lookup = { - .dev_id = "tegradc.1", - .con_id = "dsib", - }, - .reg = 0xd0, - .flags = MUX | PLLD, - .max_rate = 500000000, - .u.periph = { - .clk_num = 82, - }, - .reset = &tegra30_periph_clk_reset, -}; -static struct clk tegra_dsib = { - .name = "dsib", - .ops = &tegra30_dsib_clk_ops, - .hw = &tegra_dsib_hw.hw, - .parent_names = mux_plld_out0_plld2_out0, - .parents = mux_plld_out0_plld2_out0_p, - .num_parents = ARRAY_SIZE(mux_plld_out0_plld2_out0), -}; - -struct clk *tegra_list_clks[] = { - &tegra_apbdma, - &tegra_rtc, - &tegra_kbc, - &tegra_timer, - &tegra_kfuse, - &tegra_fuse, - &tegra_fuse_burn, - &tegra_apbif, - &tegra_i2s0, - &tegra_i2s1, - &tegra_i2s2, - &tegra_i2s3, - &tegra_i2s4, - &tegra_spdif_out, - &tegra_spdif_in, - &tegra_pwm, - &tegra_d_audio, - &tegra_dam0, - &tegra_dam1, - &tegra_dam2, - &tegra_hda, - &tegra_hda2codec_2x, - &tegra_hda2hdmi, - &tegra_sbc1, - &tegra_sbc2, - &tegra_sbc3, - &tegra_sbc4, - &tegra_sbc5, - &tegra_sbc6, - &tegra_sata_oob, - &tegra_sata, - &tegra_sata_cold, - &tegra_ndflash, - &tegra_ndspeed, - &tegra_vfir, - &tegra_sdmmc1, - &tegra_sdmmc2, - &tegra_sdmmc3, - &tegra_sdmmc4, - &tegra_vcp, - &tegra_bsea, - &tegra_bsev, - &tegra_vde, - &tegra_csite, - &tegra_la, - &tegra_owr, - &tegra_nor, - &tegra_mipi, - &tegra_i2c1, - &tegra_i2c2, - &tegra_i2c3, - &tegra_i2c4, - &tegra_i2c5, - &tegra_uarta, - &tegra_uartb, - &tegra_uartc, - &tegra_uartd, - &tegra_uarte, - &tegra_vi, - &tegra_3d, - &tegra_3d2, - &tegra_2d, - &tegra_vi_sensor, - &tegra_epp, - &tegra_mpe, - &tegra_host1x, - &tegra_cve, - &tegra_tvo, - &tegra_dtv, - &tegra_hdmi, - &tegra_tvdac, - &tegra_disp1, - &tegra_disp2, - &tegra_usbd, - &tegra_usb2, - &tegra_usb3, - &tegra_dsia, - &tegra_dsib, - &tegra_csi, - &tegra_isp, - &tegra_csus, - &tegra_tsensor, - &tegra_actmon, - &tegra_extern1, - &tegra_extern2, - &tegra_extern3, - &tegra_i2cslow, - &tegra_pcie, - &tegra_afi, - &tegra_se, -}; - -#define CLK_DUPLICATE(_name, _dev, _con) \ - { \ - .name = _name, \ - .lookup = { \ - .dev_id = _dev, \ - .con_id = _con, \ - }, \ - } - -/* Some clocks may be used by different drivers depending on the board - * configuration. List those here to register them twice in the clock lookup - * table under two names. - */ -struct clk_duplicate tegra_clk_duplicates[] = { - CLK_DUPLICATE("uarta", "serial8250.0", NULL), - CLK_DUPLICATE("uartb", "serial8250.1", NULL), - CLK_DUPLICATE("uartc", "serial8250.2", NULL), - CLK_DUPLICATE("uartd", "serial8250.3", NULL), - CLK_DUPLICATE("uarte", "serial8250.4", NULL), - CLK_DUPLICATE("usbd", "utmip-pad", NULL), - CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), - CLK_DUPLICATE("usbd", "tegra-otg", NULL), - CLK_DUPLICATE("dsib", "tegradc.0", "dsib"), - CLK_DUPLICATE("dsia", "tegradc.1", "dsia"), - CLK_DUPLICATE("bsev", "tegra-avp", "bsev"), - CLK_DUPLICATE("bsev", "nvavp", "bsev"), - CLK_DUPLICATE("vde", "tegra-aes", "vde"), - CLK_DUPLICATE("bsea", "tegra-aes", "bsea"), - CLK_DUPLICATE("bsea", "nvavp", "bsea"), - CLK_DUPLICATE("cml1", "tegra_sata_cml", NULL), - CLK_DUPLICATE("cml0", "tegra_pcie", "cml"), - CLK_DUPLICATE("pciex", "tegra_pcie", "pciex"), - CLK_DUPLICATE("i2c1", "tegra-i2c-slave.0", NULL), - CLK_DUPLICATE("i2c2", "tegra-i2c-slave.1", NULL), - CLK_DUPLICATE("i2c3", "tegra-i2c-slave.2", NULL), - CLK_DUPLICATE("i2c4", "tegra-i2c-slave.3", NULL), - CLK_DUPLICATE("i2c5", "tegra-i2c-slave.4", NULL), - CLK_DUPLICATE("sbc1", "spi_slave_tegra.0", NULL), - CLK_DUPLICATE("sbc2", "spi_slave_tegra.1", NULL), - CLK_DUPLICATE("sbc3", "spi_slave_tegra.2", NULL), - CLK_DUPLICATE("sbc4", "spi_slave_tegra.3", NULL), - CLK_DUPLICATE("sbc5", "spi_slave_tegra.4", NULL), - CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL), - CLK_DUPLICATE("twd", "smp_twd", NULL), - CLK_DUPLICATE("vcp", "nvavp", "vcp"), - CLK_DUPLICATE("i2s0", NULL, "i2s0"), - CLK_DUPLICATE("i2s1", NULL, "i2s1"), - CLK_DUPLICATE("i2s2", NULL, "i2s2"), - CLK_DUPLICATE("i2s3", NULL, "i2s3"), - CLK_DUPLICATE("i2s4", NULL, "i2s4"), - CLK_DUPLICATE("dam0", NULL, "dam0"), - CLK_DUPLICATE("dam1", NULL, "dam1"), - CLK_DUPLICATE("dam2", NULL, "dam2"), - CLK_DUPLICATE("spdif_in", NULL, "spdif_in"), - CLK_DUPLICATE("pll_p_out3", "tegra-i2c.0", "fast-clk"), - CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"), - CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"), - CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"), - CLK_DUPLICATE("pll_p_out3", "tegra-i2c.4", "fast-clk"), - CLK_DUPLICATE("pll_p", "tegradc.0", "parent"), - CLK_DUPLICATE("pll_p", "tegradc.1", "parent"), - CLK_DUPLICATE("pll_d2_out0", "hdmi", "parent"), -}; - -struct clk *tegra_ptr_clks[] = { - &tegra_clk_32k, - &tegra_clk_m, - &tegra_clk_m_div2, - &tegra_clk_m_div4, - &tegra_pll_ref, - &tegra_pll_m, - &tegra_pll_m_out1, - &tegra_pll_c, - &tegra_pll_c_out1, - &tegra_pll_p, - &tegra_pll_p_out1, - &tegra_pll_p_out2, - &tegra_pll_p_out3, - &tegra_pll_p_out4, - &tegra_pll_a, - &tegra_pll_a_out0, - &tegra_pll_d, - &tegra_pll_d_out0, - &tegra_pll_d2, - &tegra_pll_d2_out0, - &tegra_pll_u, - &tegra_pll_x, - &tegra_pll_x_out0, - &tegra_pll_e, - &tegra_clk_cclk_g, - &tegra_cml0, - &tegra_cml1, - &tegra_pciex, - &tegra_clk_sclk, - &tegra_hclk, - &tegra_pclk, - &tegra_clk_blink, - &tegra30_clk_twd, -}; - -static void tegra30_init_one_clock(struct clk *c) -{ - struct clk_tegra *clk = to_clk_tegra(c->hw); - __clk_init(NULL, c); - INIT_LIST_HEAD(&clk->shared_bus_list); - if (!clk->lookup.dev_id && !clk->lookup.con_id) - clk->lookup.con_id = c->name; - clk->lookup.clk = c; - clkdev_add(&clk->lookup); - tegra_clk_add(c); -} - -void __init tegra30_init_clocks(void) -{ - int i; - struct clk *c; - - for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++) - tegra30_init_one_clock(tegra_ptr_clks[i]); - - for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++) - tegra30_init_one_clock(tegra_list_clks[i]); - - for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) { - c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name); - if (!c) { - pr_err("%s: Unknown duplicate clock %s\n", __func__, - tegra_clk_duplicates[i].name); - continue; - } - - tegra_clk_duplicates[i].lookup.clk = c; - clkdev_add(&tegra_clk_duplicates[i].lookup); - } - - for (i = 0; i < ARRAY_SIZE(tegra_sync_source_list); i++) - tegra30_init_one_clock(tegra_sync_source_list[i]); - for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_list); i++) - tegra30_init_one_clock(tegra_clk_audio_list[i]); - for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_2x_list); i++) - tegra30_init_one_clock(tegra_clk_audio_2x_list[i]); - - for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++) - tegra30_init_one_clock(tegra_clk_out_list[i]); - - tegra30_cpu_car_ops_init(); -} diff --git a/arch/arm/mach-tegra/tegra_cpu_car.h b/arch/arm/mach-tegra/tegra_cpu_car.h deleted file mode 100644 index 9764d31..0000000 --- a/arch/arm/mach-tegra/tegra_cpu_car.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __MACH_TEGRA_CPU_CAR_H -#define __MACH_TEGRA_CPU_CAR_H - -/* - * Tegra CPU clock and reset control ops - * - * wait_for_reset: - * keep waiting until the CPU in reset state - * put_in_reset: - * put the CPU in reset state - * out_of_reset: - * release the CPU from reset state - * enable_clock: - * CPU clock un-gate - * disable_clock: - * CPU clock gate - * rail_off_ready: - * CPU is ready for rail off - * suspend: - * save the clock settings when CPU go into low-power state - * resume: - * restore the clock settings when CPU exit low-power state - */ -struct tegra_cpu_car_ops { - void (*wait_for_reset)(u32 cpu); - void (*put_in_reset)(u32 cpu); - void (*out_of_reset)(u32 cpu); - void (*enable_clock)(u32 cpu); - void (*disable_clock)(u32 cpu); -#ifdef CONFIG_PM_SLEEP - bool (*rail_off_ready)(void); - void (*suspend)(void); - void (*resume)(void); -#endif -}; - -extern struct tegra_cpu_car_ops *tegra_cpu_car_ops; - -static inline void tegra_wait_cpu_in_reset(u32 cpu) -{ - if (WARN_ON(!tegra_cpu_car_ops->wait_for_reset)) - return; - - tegra_cpu_car_ops->wait_for_reset(cpu); -} - -static inline void tegra_put_cpu_in_reset(u32 cpu) -{ - if (WARN_ON(!tegra_cpu_car_ops->put_in_reset)) - return; - - tegra_cpu_car_ops->put_in_reset(cpu); -} - -static inline void tegra_cpu_out_of_reset(u32 cpu) -{ - if (WARN_ON(!tegra_cpu_car_ops->out_of_reset)) - return; - - tegra_cpu_car_ops->out_of_reset(cpu); -} - -static inline void tegra_enable_cpu_clock(u32 cpu) -{ - if (WARN_ON(!tegra_cpu_car_ops->enable_clock)) - return; - - tegra_cpu_car_ops->enable_clock(cpu); -} - -static inline void tegra_disable_cpu_clock(u32 cpu) -{ - if (WARN_ON(!tegra_cpu_car_ops->disable_clock)) - return; - - tegra_cpu_car_ops->disable_clock(cpu); -} - -#ifdef CONFIG_PM_SLEEP -static inline bool tegra_cpu_rail_off_ready(void) -{ - if (WARN_ON(!tegra_cpu_car_ops->rail_off_ready)) - return false; - - return tegra_cpu_car_ops->rail_off_ready(); -} - -static inline void tegra_cpu_clock_suspend(void) -{ - if (WARN_ON(!tegra_cpu_car_ops->suspend)) - return; - - tegra_cpu_car_ops->suspend(); -} - -static inline void tegra_cpu_clock_resume(void) -{ - if (WARN_ON(!tegra_cpu_car_ops->resume)) - return; - - tegra_cpu_car_ops->resume(); -} -#endif - -void tegra20_cpu_car_ops_init(void); -void tegra30_cpu_car_ops_init(void); - -#endif /* __MACH_TEGRA_CPU_CAR_H */ diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c deleted file mode 100644 index e4863f3..0000000 --- a/arch/arm/mach-tegra/timer.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * arch/arch/mach-tegra/timer.c - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/err.h> -#include <linux/time.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clockchips.h> -#include <linux/clocksource.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> -#include <asm/smp_twd.h> -#include <asm/sched_clock.h> - -#include "board.h" - -#define RTC_SECONDS 0x08 -#define RTC_SHADOW_SECONDS 0x0c -#define RTC_MILLISECONDS 0x10 - -#define TIMERUS_CNTR_1US 0x10 -#define TIMERUS_USEC_CFG 0x14 -#define TIMERUS_CNTR_FREEZE 0x4c - -#define TIMER1_BASE 0x0 -#define TIMER2_BASE 0x8 -#define TIMER3_BASE 0x50 -#define TIMER4_BASE 0x58 - -#define TIMER_PTV 0x0 -#define TIMER_PCR 0x4 - -static void __iomem *timer_reg_base; -static void __iomem *rtc_base; - -static struct timespec persistent_ts; -static u64 persistent_ms, last_persistent_ms; - -#define timer_writel(value, reg) \ - __raw_writel(value, timer_reg_base + (reg)) -#define timer_readl(reg) \ - __raw_readl(timer_reg_base + (reg)) - -static int tegra_timer_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - u32 reg; - - reg = 0x80000000 | ((cycles > 1) ? (cycles-1) : 0); - timer_writel(reg, TIMER3_BASE + TIMER_PTV); - - return 0; -} - -static void tegra_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - u32 reg; - - timer_writel(0, TIMER3_BASE + TIMER_PTV); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - reg = 0xC0000000 | ((1000000/HZ)-1); - timer_writel(reg, TIMER3_BASE + TIMER_PTV); - break; - case CLOCK_EVT_MODE_ONESHOT: - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device tegra_clockevent = { - .name = "timer0", - .rating = 300, - .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, - .set_next_event = tegra_timer_set_next_event, - .set_mode = tegra_timer_set_mode, -}; - -static u32 notrace tegra_read_sched_clock(void) -{ - return timer_readl(TIMERUS_CNTR_1US); -} - -/* - * tegra_rtc_read - Reads the Tegra RTC registers - * Care must be taken that this funciton is not called while the - * tegra_rtc driver could be executing to avoid race conditions - * on the RTC shadow register - */ -static u64 tegra_rtc_read_ms(void) -{ - u32 ms = readl(rtc_base + RTC_MILLISECONDS); - u32 s = readl(rtc_base + RTC_SHADOW_SECONDS); - return (u64)s * MSEC_PER_SEC + ms; -} - -/* - * tegra_read_persistent_clock - Return time from a persistent clock. - * - * Reads the time from a source which isn't disabled during PM, the - * 32k sync timer. Convert the cycles elapsed since last read into - * nsecs and adds to a monotonically increasing timespec. - * Care must be taken that this funciton is not called while the - * tegra_rtc driver could be executing to avoid race conditions - * on the RTC shadow register - */ -static void tegra_read_persistent_clock(struct timespec *ts) -{ - u64 delta; - struct timespec *tsp = &persistent_ts; - - last_persistent_ms = persistent_ms; - persistent_ms = tegra_rtc_read_ms(); - delta = persistent_ms - last_persistent_ms; - - timespec_add_ns(tsp, delta * NSEC_PER_MSEC); - *ts = *tsp; -} - -static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = (struct clock_event_device *)dev_id; - timer_writel(1<<30, TIMER3_BASE + TIMER_PCR); - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static struct irqaction tegra_timer_irq = { - .name = "timer0", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_HIGH, - .handler = tegra_timer_interrupt, - .dev_id = &tegra_clockevent, -}; - -static const struct of_device_id timer_match[] __initconst = { - { .compatible = "nvidia,tegra20-timer" }, - {} -}; - -static const struct of_device_id rtc_match[] __initconst = { - { .compatible = "nvidia,tegra20-rtc" }, - {} -}; - -static void __init tegra_init_timer(void) -{ - struct device_node *np; - struct clk *clk; - unsigned long rate; - int ret; - - np = of_find_matching_node(NULL, timer_match); - if (!np) { - pr_err("Failed to find timer DT node\n"); - BUG(); - } - - timer_reg_base = of_iomap(np, 0); - if (!timer_reg_base) { - pr_err("Can't map timer registers"); - BUG(); - } - - tegra_timer_irq.irq = irq_of_parse_and_map(np, 2); - if (tegra_timer_irq.irq <= 0) { - pr_err("Failed to map timer IRQ\n"); - BUG(); - } - - clk = clk_get_sys("timer", NULL); - if (IS_ERR(clk)) { - pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n"); - rate = 12000000; - } else { - clk_prepare_enable(clk); - rate = clk_get_rate(clk); - } - - of_node_put(np); - - np = of_find_matching_node(NULL, rtc_match); - if (!np) { - pr_err("Failed to find RTC DT node\n"); - BUG(); - } - - rtc_base = of_iomap(np, 0); - if (!rtc_base) { - pr_err("Can't map RTC registers"); - BUG(); - } - - /* - * rtc registers are used by read_persistent_clock, keep the rtc clock - * enabled - */ - clk = clk_get_sys("rtc-tegra", NULL); - if (IS_ERR(clk)) - pr_warn("Unable to get rtc-tegra clock\n"); - else - clk_prepare_enable(clk); - - of_node_put(np); - - switch (rate) { - case 12000000: - timer_writel(0x000b, TIMERUS_USEC_CFG); - break; - case 13000000: - timer_writel(0x000c, TIMERUS_USEC_CFG); - break; - case 19200000: - timer_writel(0x045f, TIMERUS_USEC_CFG); - break; - case 26000000: - timer_writel(0x0019, TIMERUS_USEC_CFG); - break; - default: - WARN(1, "Unknown clock rate"); - } - - setup_sched_clock(tegra_read_sched_clock, 32, 1000000); - - if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US, - "timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) { - pr_err("Failed to register clocksource\n"); - BUG(); - } - - ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq); - if (ret) { - pr_err("Failed to register timer IRQ: %d\n", ret); - BUG(); - } - - clockevents_calc_mult_shift(&tegra_clockevent, 1000000, 5); - tegra_clockevent.max_delta_ns = - clockevent_delta2ns(0x1fffffff, &tegra_clockevent); - tegra_clockevent.min_delta_ns = - clockevent_delta2ns(0x1, &tegra_clockevent); - tegra_clockevent.cpumask = cpu_all_mask; - tegra_clockevent.irq = tegra_timer_irq.irq; - clockevents_register_device(&tegra_clockevent); -#ifdef CONFIG_HAVE_ARM_TWD - twd_local_timer_of_register(); -#endif - register_persistent_clock(NULL, tegra_read_persistent_clock); -} - -struct sys_timer tegra_sys_timer = { - .init = tegra_init_timer, -}; - -#ifdef CONFIG_PM -static u32 usec_config; - -void tegra_timer_suspend(void) -{ - usec_config = timer_readl(TIMERUS_USEC_CFG); -} - -void tegra_timer_resume(void) -{ - timer_writel(usec_config, TIMERUS_USEC_CFG); -} -#endif diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 4ce77cd..a683d17 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -31,16 +31,16 @@ #include <linux/dma-mapping.h> #include <linux/platform_data/clk-u300.h> #include <linux/platform_data/pinctrl-coh901.h> +#include <linux/platform_data/dma-coh901318.h> +#include <linux/irqchip/arm-vic.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> -#include <asm/hardware/vic.h> #include <asm/mach/map.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/coh901318.h> #include <mach/hardware.h> #include <mach/syscon.h> #include <mach/irqs.h> @@ -49,7 +49,6 @@ #include "spi.h" #include "i2c.h" #include "u300-gpio.h" -#include "dma_channels.h" /* * Static I/O mappings that are needed for booting the U300 platforms. The @@ -327,1089 +326,6 @@ static struct resource dma_resource[] = { } }; -/* points out all dma slave channels. - * Syntax is [A1, B1, A2, B2, .... ,-1,-1] - * Select all channels from A to B, end of list is marked with -1,-1 - */ -static int dma_slave_channels[] = { - U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, - U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1}; - -/* points out all dma memcpy channels. */ -static int dma_memcpy_channels[] = { - U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1}; - -/** register dma for memory access - * - * active 1 means dma intends to access memory - * 0 means dma wont access memory - */ -static void coh901318_access_memory_state(struct device *dev, bool active) -{ -} - -#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \ - COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \ - COH901318_CX_CFG_LCR_DISABLE | \ - COH901318_CX_CFG_TC_IRQ_ENABLE | \ - COH901318_CX_CFG_BE_IRQ_ENABLE) -#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \ - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \ - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_MASTER_MODE_M1RW | \ - COH901318_CX_CTRL_TCP_DISABLE | \ - COH901318_CX_CTRL_TC_IRQ_DISABLE | \ - COH901318_CX_CTRL_HSP_DISABLE | \ - COH901318_CX_CTRL_HSS_DISABLE | \ - COH901318_CX_CTRL_DDMA_LEGACY | \ - COH901318_CX_CTRL_PRDD_SOURCE) -#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \ - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \ - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_MASTER_MODE_M1RW | \ - COH901318_CX_CTRL_TCP_DISABLE | \ - COH901318_CX_CTRL_TC_IRQ_DISABLE | \ - COH901318_CX_CTRL_HSP_DISABLE | \ - COH901318_CX_CTRL_HSS_DISABLE | \ - COH901318_CX_CTRL_DDMA_LEGACY | \ - COH901318_CX_CTRL_PRDD_SOURCE) -#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \ - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \ - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \ - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \ - COH901318_CX_CTRL_MASTER_MODE_M1RW | \ - COH901318_CX_CTRL_TCP_DISABLE | \ - COH901318_CX_CTRL_TC_IRQ_ENABLE | \ - COH901318_CX_CTRL_HSP_DISABLE | \ - COH901318_CX_CTRL_HSS_DISABLE | \ - COH901318_CX_CTRL_DDMA_LEGACY | \ - COH901318_CX_CTRL_PRDD_SOURCE) - -const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = { - { - .number = U300_DMA_MSL_TX_0, - .name = "MSL TX 0", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20, - }, - { - .number = U300_DMA_MSL_TX_1, - .name = "MSL TX 1", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - }, - { - .number = U300_DMA_MSL_TX_2, - .name = "MSL TX 2", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .desc_nbr_max = 10, - }, - { - .number = U300_DMA_MSL_TX_3, - .name = "MSL TX 3", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - }, - { - .number = U300_DMA_MSL_TX_4, - .name = "MSL TX 4", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1R_M2W | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - }, - { - .number = U300_DMA_MSL_TX_5, - .name = "MSL TX 5", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20, - }, - { - .number = U300_DMA_MSL_TX_6, - .name = "MSL TX 6", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20, - }, - { - .number = U300_DMA_MSL_RX_0, - .name = "MSL RX 0", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220, - }, - { - .number = U300_DMA_MSL_RX_1, - .name = "MSL RX 1", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_MSL_RX_2, - .name = "MSL RX 2", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_MSL_RX_3, - .name = "MSL RX 3", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_MSL_RX_4, - .name = "MSL RX 4", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_MSL_RX_5, - .name = "MSL RX 5", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_32_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M2R_M1W | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_DEMAND_DMA1 | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_MSL_RX_6, - .name = "MSL RX 6", - .priority_high = 0, - .dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220, - }, - /* - * Don't set up device address, burst count or size of src - * or dst bus for this peripheral - handled by PrimeCell - * DMA extension. - */ - { - .number = U300_DMA_MMCSD_RX_TX, - .name = "MMCSD RX TX", - .priority_high = 0, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - - }, - { - .number = U300_DMA_MSPRO_TX, - .name = "MSPRO TX", - .priority_high = 0, - }, - { - .number = U300_DMA_MSPRO_RX, - .name = "MSPRO RX", - .priority_high = 0, - }, - /* - * Don't set up device address, burst count or size of src - * or dst bus for this peripheral - handled by PrimeCell - * DMA extension. - */ - { - .number = U300_DMA_UART0_TX, - .name = "UART0 TX", - .priority_high = 0, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - }, - { - .number = U300_DMA_UART0_RX, - .name = "UART0 RX", - .priority_high = 0, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - }, - { - .number = U300_DMA_APEX_TX, - .name = "APEX TX", - .priority_high = 0, - }, - { - .number = U300_DMA_APEX_RX, - .name = "APEX RX", - .priority_high = 0, - }, - { - .number = U300_DMA_PCM_I2S0_TX, - .name = "PCM I2S0 TX", - .priority_high = 1, - .dev_addr = U300_PCM_I2S0_BASE + 0x14, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - }, - { - .number = U300_DMA_PCM_I2S0_RX, - .name = "PCM I2S0 RX", - .priority_high = 1, - .dev_addr = U300_PCM_I2S0_BASE + 0x10, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_PCM_I2S1_TX, - .name = "PCM I2S1 TX", - .priority_high = 1, - .dev_addr = U300_PCM_I2S1_BASE + 0x14, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_DISABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_SOURCE, - }, - { - .number = U300_DMA_PCM_I2S1_RX, - .name = "PCM I2S1 RX", - .priority_high = 1, - .dev_addr = U300_PCM_I2S1_BASE + 0x10, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_BURST_COUNT_16_BYTES | - COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE | - COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | - COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_ENABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY | - COH901318_CX_CTRL_PRDD_DEST, - }, - { - .number = U300_DMA_XGAM_CDI, - .name = "XGAM CDI", - .priority_high = 0, - }, - { - .number = U300_DMA_XGAM_PDI, - .name = "XGAM PDI", - .priority_high = 0, - }, - /* - * Don't set up device address, burst count or size of src - * or dst bus for this peripheral - handled by PrimeCell - * DMA extension. - */ - { - .number = U300_DMA_SPI_TX, - .name = "SPI TX", - .priority_high = 0, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - }, - { - .number = U300_DMA_SPI_RX, - .name = "SPI RX", - .priority_high = 0, - .param.config = COH901318_CX_CFG_CH_DISABLE | - COH901318_CX_CFG_LCR_DISABLE | - COH901318_CX_CFG_TC_IRQ_ENABLE | - COH901318_CX_CFG_BE_IRQ_ENABLE, - .param.ctrl_lli_chained = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_DISABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - .param.ctrl_lli_last = 0 | - COH901318_CX_CTRL_TC_ENABLE | - COH901318_CX_CTRL_MASTER_MODE_M1RW | - COH901318_CX_CTRL_TCP_DISABLE | - COH901318_CX_CTRL_TC_IRQ_ENABLE | - COH901318_CX_CTRL_HSP_ENABLE | - COH901318_CX_CTRL_HSS_DISABLE | - COH901318_CX_CTRL_DDMA_LEGACY, - - }, - { - .number = U300_DMA_GENERAL_PURPOSE_0, - .name = "GENERAL 00", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_1, - .name = "GENERAL 01", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_2, - .name = "GENERAL 02", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_3, - .name = "GENERAL 03", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_4, - .name = "GENERAL 04", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_5, - .name = "GENERAL 05", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_6, - .name = "GENERAL 06", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_7, - .name = "GENERAL 07", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_GENERAL_PURPOSE_8, - .name = "GENERAL 08", - .priority_high = 0, - - .param.config = flags_memcpy_config, - .param.ctrl_lli_chained = flags_memcpy_lli_chained, - .param.ctrl_lli = flags_memcpy_lli, - .param.ctrl_lli_last = flags_memcpy_lli_last, - }, - { - .number = U300_DMA_UART1_TX, - .name = "UART1 TX", - .priority_high = 0, - }, - { - .number = U300_DMA_UART1_RX, - .name = "UART1 RX", - .priority_high = 0, - } -}; - - -static struct coh901318_platform coh901318_platform = { - .chans_slave = dma_slave_channels, - .chans_memcpy = dma_memcpy_channels, - .access_memory_state = coh901318_access_memory_state, - .chan_conf = chan_config, - .max_channels = U300_DMA_CHANNELS, -}; static struct resource pinctrl_resources[] = { { @@ -1521,7 +437,6 @@ static struct platform_device dma_device = { .resource = dma_resource, .num_resources = ARRAY_SIZE(dma_resource), .dev = { - .platform_data = &coh901318_platform, .coherent_dma_mask = ~0, }, }; @@ -1779,8 +694,7 @@ MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") .map_io = u300_map_io, .nr_irqs = 0, .init_irq = u300_init_irq, - .handle_irq = vic_handle_irq, - .timer = &u300_timer, + .init_time = u300_timer_init, .init_machine = u300_init_machine, .restart = u300_restart, MACHINE_END diff --git a/arch/arm/mach-u300/dma_channels.h b/arch/arm/mach-u300/dma_channels.h deleted file mode 100644 index 4e8a88f..0000000 --- a/arch/arm/mach-u300/dma_channels.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * - * arch/arm/mach-u300/include/mach/dma_channels.h - * - * - * Copyright (C) 2007-2012 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Map file for the U300 dma driver. - * Author: Per Friden <per.friden@stericsson.com> - */ - -#ifndef DMA_CHANNELS_H -#define DMA_CHANNELS_H - -#define U300_DMA_MSL_TX_0 0 -#define U300_DMA_MSL_TX_1 1 -#define U300_DMA_MSL_TX_2 2 -#define U300_DMA_MSL_TX_3 3 -#define U300_DMA_MSL_TX_4 4 -#define U300_DMA_MSL_TX_5 5 -#define U300_DMA_MSL_TX_6 6 -#define U300_DMA_MSL_RX_0 7 -#define U300_DMA_MSL_RX_1 8 -#define U300_DMA_MSL_RX_2 9 -#define U300_DMA_MSL_RX_3 10 -#define U300_DMA_MSL_RX_4 11 -#define U300_DMA_MSL_RX_5 12 -#define U300_DMA_MSL_RX_6 13 -#define U300_DMA_MMCSD_RX_TX 14 -#define U300_DMA_MSPRO_TX 15 -#define U300_DMA_MSPRO_RX 16 -#define U300_DMA_UART0_TX 17 -#define U300_DMA_UART0_RX 18 -#define U300_DMA_APEX_TX 19 -#define U300_DMA_APEX_RX 20 -#define U300_DMA_PCM_I2S0_TX 21 -#define U300_DMA_PCM_I2S0_RX 22 -#define U300_DMA_PCM_I2S1_TX 23 -#define U300_DMA_PCM_I2S1_RX 24 -#define U300_DMA_XGAM_CDI 25 -#define U300_DMA_XGAM_PDI 26 -#define U300_DMA_SPI_TX 27 -#define U300_DMA_SPI_RX 28 -#define U300_DMA_GENERAL_PURPOSE_0 29 -#define U300_DMA_GENERAL_PURPOSE_1 30 -#define U300_DMA_GENERAL_PURPOSE_2 31 -#define U300_DMA_GENERAL_PURPOSE_3 32 -#define U300_DMA_GENERAL_PURPOSE_4 33 -#define U300_DMA_GENERAL_PURPOSE_5 34 -#define U300_DMA_GENERAL_PURPOSE_6 35 -#define U300_DMA_GENERAL_PURPOSE_7 36 -#define U300_DMA_GENERAL_PURPOSE_8 37 -#define U300_DMA_UART1_TX 38 -#define U300_DMA_UART1_RX 39 - -#define U300_DMA_DEVICE_CHANNELS 32 -#define U300_DMA_CHANNELS 40 - - -#endif /* DMA_CHANNELS_H */ diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h deleted file mode 100644 index 7c3b2b2..0000000 --- a/arch/arm/mach-u300/include/mach/coh901318.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * - * include/linux/coh901318.h - * - * - * Copyright (C) 2007-2009 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * DMA driver for COH 901 318 - * Author: Per Friden <per.friden@stericsson.com> - */ - -#ifndef COH901318_H -#define COH901318_H - -#include <linux/device.h> -#include <linux/dmaengine.h> - -#define MAX_DMA_PACKET_SIZE_SHIFT 11 -#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT) - -/** - * struct coh901318_lli - linked list item for DMAC - * @control: control settings for DMAC - * @src_addr: transfer source address - * @dst_addr: transfer destination address - * @link_addr: physical address to next lli - * @virt_link_addr: virtual address of next lli (only used by pool_free) - * @phy_this: physical address of current lli (only used by pool_free) - */ -struct coh901318_lli { - u32 control; - dma_addr_t src_addr; - dma_addr_t dst_addr; - dma_addr_t link_addr; - - void *virt_link_addr; - dma_addr_t phy_this; -}; -/** - * struct coh901318_params - parameters for DMAC configuration - * @config: DMA config register - * @ctrl_lli_last: DMA control register for the last lli in the list - * @ctrl_lli: DMA control register for an lli - * @ctrl_lli_chained: DMA control register for a chained lli - */ -struct coh901318_params { - u32 config; - u32 ctrl_lli_last; - u32 ctrl_lli; - u32 ctrl_lli_chained; -}; -/** - * struct coh_dma_channel - dma channel base - * @name: ascii name of dma channel - * @number: channel id number - * @desc_nbr_max: number of preallocated descriptors - * @priority_high: prio of channel, 0 low otherwise high. - * @param: configuration parameters - * @dev_addr: physical address of periphal connected to channel - */ -struct coh_dma_channel { - const char name[32]; - const int number; - const int desc_nbr_max; - const int priority_high; - const struct coh901318_params param; - const dma_addr_t dev_addr; -}; - -/** - * dma_access_memory_state_t - register dma for memory access - * - * @dev: The dma device - * @active: 1 means dma intends to access memory - * 0 means dma wont access memory - */ -typedef void (*dma_access_memory_state_t)(struct device *dev, - bool active); - -/** - * struct powersave - DMA power save structure - * @lock: lock protecting data in this struct - * @started_channels: bit mask indicating active dma channels - */ -struct powersave { - spinlock_t lock; - u64 started_channels; -}; -/** - * struct coh901318_platform - platform arch structure - * @chans_slave: specifying dma slave channels - * @chans_memcpy: specifying dma memcpy channels - * @access_memory_state: requesting DMA memory access (on / off) - * @chan_conf: dma channel configurations - * @max_channels: max number of dma chanenls - */ -struct coh901318_platform { - const int *chans_slave; - const int *chans_memcpy; - const dma_access_memory_state_t access_memory_state; - const struct coh_dma_channel *chan_conf; - const int max_channels; -}; - -#ifdef CONFIG_COH901318 -/** - * coh901318_filter_id() - DMA channel filter function - * @chan: dma channel handle - * @chan_id: id of dma channel to be filter out - * - * In dma_request_channel() it specifies what channel id to be requested - */ -bool coh901318_filter_id(struct dma_chan *chan, void *chan_id); -#else -static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id) -{ - return false; -} -#endif - -/* - * DMA Controller - this access the static mappings of the coh901318 dma. - * - */ - -#define COH901318_MOD32_MASK (0x1F) -#define COH901318_WORD_MASK (0xFFFFFFFF) -/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */ -#define COH901318_INT_STATUS1 (0x0000) -#define COH901318_INT_STATUS2 (0x0004) -/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */ -#define COH901318_TC_INT_STATUS1 (0x0008) -#define COH901318_TC_INT_STATUS2 (0x000C) -/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */ -#define COH901318_TC_INT_CLEAR1 (0x0010) -#define COH901318_TC_INT_CLEAR2 (0x0014) -/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */ -#define COH901318_RAW_TC_INT_STATUS1 (0x0018) -#define COH901318_RAW_TC_INT_STATUS2 (0x001C) -/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */ -#define COH901318_BE_INT_STATUS1 (0x0020) -#define COH901318_BE_INT_STATUS2 (0x0024) -/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */ -#define COH901318_BE_INT_CLEAR1 (0x0028) -#define COH901318_BE_INT_CLEAR2 (0x002C) -/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */ -#define COH901318_RAW_BE_INT_STATUS1 (0x0030) -#define COH901318_RAW_BE_INT_STATUS2 (0x0034) - -/* - * CX_CFG - Channel Configuration Registers 32bit (R/W) - */ -#define COH901318_CX_CFG (0x0100) -#define COH901318_CX_CFG_SPACING (0x04) -/* Channel enable activates tha dma job */ -#define COH901318_CX_CFG_CH_ENABLE (0x00000001) -#define COH901318_CX_CFG_CH_DISABLE (0x00000000) -/* Request Mode */ -#define COH901318_CX_CFG_RM_MASK (0x00000006) -#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY (0x0 << 1) -#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY (0x1 << 1) -#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY (0x1 << 1) -#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY (0x3 << 1) -#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY (0x3 << 1) -/* Linked channel request field. RM must == 11 */ -#define COH901318_CX_CFG_LCRF_SHIFT 3 -#define COH901318_CX_CFG_LCRF_MASK (0x000001F8) -#define COH901318_CX_CFG_LCR_DISABLE (0x00000000) -/* Terminal Counter Interrupt Request Mask */ -#define COH901318_CX_CFG_TC_IRQ_ENABLE (0x00000200) -#define COH901318_CX_CFG_TC_IRQ_DISABLE (0x00000000) -/* Bus Error interrupt Mask */ -#define COH901318_CX_CFG_BE_IRQ_ENABLE (0x00000400) -#define COH901318_CX_CFG_BE_IRQ_DISABLE (0x00000000) - -/* - * CX_STAT - Channel Status Registers 32bit (R/-) - */ -#define COH901318_CX_STAT (0x0200) -#define COH901318_CX_STAT_SPACING (0x04) -#define COH901318_CX_STAT_RBE_IRQ_IND (0x00000008) -#define COH901318_CX_STAT_RTC_IRQ_IND (0x00000004) -#define COH901318_CX_STAT_ACTIVE (0x00000002) -#define COH901318_CX_STAT_ENABLED (0x00000001) - -/* - * CX_CTRL - Channel Control Registers 32bit (R/W) - */ -#define COH901318_CX_CTRL (0x0400) -#define COH901318_CX_CTRL_SPACING (0x10) -/* Transfer Count Enable */ -#define COH901318_CX_CTRL_TC_ENABLE (0x00001000) -#define COH901318_CX_CTRL_TC_DISABLE (0x00000000) -/* Transfer Count Value 0 - 4095 */ -#define COH901318_CX_CTRL_TC_VALUE_MASK (0x00000FFF) -/* Burst count */ -#define COH901318_CX_CTRL_BURST_COUNT_MASK (0x0000E000) -#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES (0x7 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES (0x6 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES (0x5 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES (0x4 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES (0x3 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES (0x2 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES (0x1 << 13) -#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE (0x0 << 13) -/* Source bus size */ -#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK (0x00030000) -#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS (0x2 << 16) -#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS (0x1 << 16) -#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS (0x0 << 16) -/* Source address increment */ -#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE (0x00040000) -#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE (0x00000000) -/* Destination Bus Size */ -#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK (0x00180000) -#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS (0x2 << 19) -#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS (0x1 << 19) -#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS (0x0 << 19) -/* Destination address increment */ -#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE (0x00200000) -#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE (0x00000000) -/* Master Mode (Master2 is only connected to MSL) */ -#define COH901318_CX_CTRL_MASTER_MODE_MASK (0x00C00000) -#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W (0x3 << 22) -#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W (0x2 << 22) -#define COH901318_CX_CTRL_MASTER_MODE_M2RW (0x1 << 22) -#define COH901318_CX_CTRL_MASTER_MODE_M1RW (0x0 << 22) -/* Terminal Count flag to PER enable */ -#define COH901318_CX_CTRL_TCP_ENABLE (0x01000000) -#define COH901318_CX_CTRL_TCP_DISABLE (0x00000000) -/* Terminal Count flags to CPU enable */ -#define COH901318_CX_CTRL_TC_IRQ_ENABLE (0x02000000) -#define COH901318_CX_CTRL_TC_IRQ_DISABLE (0x00000000) -/* Hand shake to peripheral */ -#define COH901318_CX_CTRL_HSP_ENABLE (0x04000000) -#define COH901318_CX_CTRL_HSP_DISABLE (0x00000000) -#define COH901318_CX_CTRL_HSS_ENABLE (0x08000000) -#define COH901318_CX_CTRL_HSS_DISABLE (0x00000000) -/* DMA mode */ -#define COH901318_CX_CTRL_DDMA_MASK (0x30000000) -#define COH901318_CX_CTRL_DDMA_LEGACY (0x0 << 28) -#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1 (0x1 << 28) -#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2 (0x2 << 28) -/* Primary Request Data Destination */ -#define COH901318_CX_CTRL_PRDD_MASK (0x40000000) -#define COH901318_CX_CTRL_PRDD_DEST (0x1 << 30) -#define COH901318_CX_CTRL_PRDD_SOURCE (0x0 << 30) - -/* - * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W) - */ -#define COH901318_CX_SRC_ADDR (0x0404) -#define COH901318_CX_SRC_ADDR_SPACING (0x10) - -/* - * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W - */ -#define COH901318_CX_DST_ADDR (0x0408) -#define COH901318_CX_DST_ADDR_SPACING (0x10) - -/* - * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W) - */ -#define COH901318_CX_LNK_ADDR (0x040C) -#define COH901318_CX_LNK_ADDR_SPACING (0x10) -#define COH901318_CX_LNK_LINK_IMMEDIATE (0x00000001) -#endif /* COH901318_H */ diff --git a/arch/arm/mach-u300/include/mach/uncompress.h b/arch/arm/mach-u300/include/mach/uncompress.h index 29acb71..783e7e6 100644 --- a/arch/arm/mach-u300/include/mach/uncompress.h +++ b/arch/arm/mach-u300/include/mach/uncompress.h @@ -43,4 +43,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index 02e6659..9106982 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -10,9 +10,8 @@ #include <linux/amba/bus.h> #include <linux/spi/spi.h> #include <linux/amba/pl022.h> +#include <linux/platform_data/dma-coh901318.h> #include <linux/err.h> -#include <mach/coh901318.h> -#include "dma_channels.h" /* * The following is for the actual devices on the SSP/SPI bus diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 1da10e2..d9e7320 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -349,7 +349,7 @@ static u32 notrace u300_read_sched_clock(void) /* * This sets up the system timers, clock source and clock event. */ -static void __init u300_timer_init(void) +void __init u300_timer_init(void) { struct clk *clk; unsigned long rate; @@ -413,11 +413,3 @@ static void __init u300_timer_init(void) * used by hrtimers! */ } - -/* - * Very simple system timer that only register the clock event and - * clock source. - */ -struct sys_timer u300_timer = { - .init = u300_timer_init, -}; diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h index b5e9791..d34287b 100644 --- a/arch/arm/mach-u300/timer.h +++ b/arch/arm/mach-u300/timer.h @@ -1 +1 @@ -extern struct sys_timer u300_timer; +extern void u300_timer_init(void); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 5dea906..3e5bbd0 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -11,6 +11,7 @@ config UX500_SOC_COMMON select COMMON_CLK select PINCTRL select PINCTRL_NOMADIK + select PINCTRL_ABX500 select PL310_ERRATA_753970 if CACHE_PL310 config UX500_SOC_DB8500 @@ -18,6 +19,11 @@ config UX500_SOC_DB8500 select CPU_FREQ_TABLE if CPU_FREQ select MFD_DB8500_PRCMU select PINCTRL_DB8500 + select PINCTRL_DB8540 + select PINCTRL_AB8500 + select PINCTRL_AB8505 + select PINCTRL_AB9540 + select PINCTRL_AB8540 select REGULATOR select REGULATOR_DB8500_PRCMU diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 1f47d96..7037d36 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -13,6 +13,7 @@ #include <mach/hardware.h> #include "board-mop500.h" +#include "id.h" enum mop500_uib { STUIB, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index d453522..b034578 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -28,7 +28,7 @@ #include <linux/mfd/tps6105x.h> #include <linux/mfd/abx500/ab8500-gpio.h> #include <linux/mfd/abx500/ab8500-codec.h> -#include <linux/leds-lp5521.h> +#include <linux/platform_data/leds-lp55xx.h> #include <linux/input.h> #include <linux/smsc911x.h> #include <linux/gpio_keys.h> @@ -40,7 +40,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -90,26 +89,8 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = { }, }; -static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { +static struct abx500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_PIN_GPIO(1), - .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, - /* config_reg is the initial configuration of ab8500 pins. - * The pins can be configured as GPIO or alt functions based - * on value present in GpioSel1 to GpioSel6 and AlternatFunction - * register. This is the array of 7 configuration settings. - * One has to compile time decide these settings. Below is the - * explanation of these setting - * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO - * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO - * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO - * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO - * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO - * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO - * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured - * as GPIO then this register selectes the alternate fucntions - */ - .config_reg = {0x00, 0x1E, 0x80, 0x01, - 0x7A, 0x00, 0x00}, }; /* ab8500-codec */ @@ -215,7 +196,7 @@ static struct platform_device snowball_sbnet_dev = { }, }; -static struct ab8500_platform_data ab8500_platdata = { +struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator_reg_init = ab8500_regulator_reg_init, .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), @@ -320,7 +301,7 @@ static struct tc3589x_platform_data mop500_tc35892_data = { .irq_base = MOP500_EGPIO_IRQ_BASE, }; -static struct lp5521_led_config lp5521_pri_led[] = { +static struct lp55xx_led_config lp5521_pri_led[] = { [0] = { .chan_nr = 0, .led_current = 0x2f, @@ -338,14 +319,14 @@ static struct lp5521_led_config lp5521_pri_led[] = { }, }; -static struct lp5521_platform_data __initdata lp5521_pri_data = { +static struct lp55xx_platform_data __initdata lp5521_pri_data = { .label = "lp5521_pri", .led_config = &lp5521_pri_led[0], .num_channels = 3, - .clock_mode = LP5521_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, }; -static struct lp5521_led_config lp5521_sec_led[] = { +static struct lp55xx_led_config lp5521_sec_led[] = { [0] = { .chan_nr = 0, .led_current = 0x2f, @@ -363,11 +344,11 @@ static struct lp5521_led_config lp5521_sec_led[] = { }, }; -static struct lp5521_platform_data __initdata lp5521_sec_data = { +static struct lp55xx_platform_data __initdata lp5521_sec_data = { .label = "lp5521_sec", .led_config = &lp5521_sec_led[0], .num_channels = 3, - .clock_mode = LP5521_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, }; static struct i2c_board_info __initdata mop500_i2c0_devices[] = { @@ -651,6 +632,7 @@ static void __init mop500_init_machine(void) int i2c0_devs; int i; + platform_device_register(&db8500_prcmu_device); mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; mop500_pinmaps_init(); @@ -685,6 +667,7 @@ static void __init snowball_init_machine(void) struct device *parent = NULL; int i; + platform_device_register(&db8500_prcmu_device); snowball_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); @@ -710,6 +693,7 @@ static void __init hrefv60_init_machine(void) int i2c0_devs; int i; + platform_device_register(&db8500_prcmu_device); /* * The HREFv60 board removed a GPIO expander and routed * all these GPIO pins to the internal GPIO controller @@ -751,8 +735,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, + .init_time = ux500_timer_init, .init_machine = mop500_init_machine, .init_late = ux500_init_late, MACHINE_END @@ -761,8 +744,7 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520") .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, + .init_time = ux500_timer_init, .init_machine = mop500_init_machine, .init_late = ux500_init_late, MACHINE_END @@ -772,8 +754,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .smp = smp_ops(ux500_smp_ops), .map_io = u8500_map_io, .init_irq = ux500_init_irq, - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, + .init_time = ux500_timer_init, .init_machine = hrefv60_init_machine, .init_late = ux500_init_late, MACHINE_END @@ -784,8 +765,7 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, + .init_time = ux500_timer_init, .init_machine = snowball_init_machine, .init_late = NULL, MACHINE_END diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 75d5b51..1c1609d 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -10,7 +10,8 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <mach/hardware.h> -#include <mach/id.h> + +#include "id.h" static void __iomem *l2x0_base; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 5b286e0..19235cf 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -27,7 +27,6 @@ #include <asm/pmu.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -37,7 +36,9 @@ #include "devices-db8500.h" #include "ste-dma40-db8500.h" + #include "board-mop500.h" +#include "id.h" /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { @@ -137,14 +138,9 @@ static struct platform_device db8500_pmu_device = { .dev.platform_data = &db8500_pmu_platdata, }; -static struct platform_device db8500_prcmu_device = { - .name = "db8500-prcmu", -}; - static struct platform_device *platform_devs[] __initdata = { &u8500_dma40_device, &db8500_pmu_device, - &db8500_prcmu_device, }; static resource_size_t __initdata db8500_gpio_base[] = { @@ -284,8 +280,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", + &db8500_prcmu_pdata), /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,nmk_pinctrl", U8500_PRCMU_BASE, + OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), /* Requires clock name and DMA bindings. */ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, @@ -341,8 +339,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, + .init_time = ux500_timer_init, .init_machine = u8500_init_machine, .init_late = NULL, .dt_compat = stericsson_dt_platform_compat, diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 721e7b4..537870d 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -17,9 +17,10 @@ #include <linux/of.h> #include <linux/of_irq.h> #include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-ux500.h> -#include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -27,6 +28,7 @@ #include <mach/devices.h> #include "board-mop500.h" +#include "id.h" void __iomem *_PRCMU_BASE; @@ -42,11 +44,6 @@ void __iomem *_PRCMU_BASE; * This feels fragile because it depends on the gpio device getting probed * _before_ any device uses the gpio interrupts. */ -static const struct of_device_id ux500_dt_irq_match[] = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - {}, -}; - void __init ux500_init_irq(void) { void __iomem *dist_base; @@ -62,7 +59,7 @@ void __init ux500_init_irq(void) #ifdef CONFIG_OF if (of_have_populated_dt()) - of_irq_init(ux500_dt_irq_match); + irqchip_init(); else #endif gic_init(0, 29, dist_base, cpu_base); @@ -71,13 +68,11 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - if (cpu_is_u8500_family()) + if (cpu_is_u8500_family() || cpu_is_u9540()) db8500_prcmu_early_init(); - if (cpu_is_u8500_family()) + if (cpu_is_u8500_family() || cpu_is_u9540()) u8500_clk_init(); - else if (cpu_is_u9540()) - u9540_clk_init(); else if (cpu_is_u8540()) u8540_clk_init(); } diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index b54884bd..ce91493 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -40,8 +40,10 @@ static inline int ux500_enter_idle(struct cpuidle_device *dev, goto wfi; /* decouple the gic from the A9 cores */ - if (prcmu_gic_decouple()) + if (prcmu_gic_decouple()) { + spin_unlock(&master_lock); goto out; + } /* If an error occur, we will have to recouple the gic * manually */ diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 318d490..f3d9419 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -13,11 +13,13 @@ #include <linux/amba/bus.h> #include <linux/amba/pl022.h> #include <linux/platform_data/dma-ste-dma40.h> +#include <linux/mfd/dbx500-prcmu.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/irqs.h> +#include "devices-db8500.h" #include "ste-dma40-db8500.h" static struct resource dma40_resources[] = { @@ -194,3 +196,45 @@ struct platform_device u8500_ske_keypad_device = { .num_resources = ARRAY_SIZE(keypad_resources), .resource = keypad_resources, }; + +struct prcmu_pdata db8500_prcmu_pdata = { + .ab_platdata = &ab8500_platdata, + .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, + .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, +}; + +static struct resource db8500_prcmu_res[] = { + { + .name = "prcmu", + .start = U8500_PRCMU_BASE, + .end = U8500_PRCMU_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "prcmu-tcdm", + .start = U8500_PRCMU_TCDM_BASE, + .end = U8500_PRCMU_TCDM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "irq", + .start = IRQ_DB8500_PRCMU1, + .end = IRQ_DB8500_PRCMU1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "prcmu-tcpm", + .start = U8500_PRCMU_TCPM_BASE, + .end = U8500_PRCMU_TCPM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device db8500_prcmu_device = { + .name = "db8500-prcmu", + .resource = db8500_prcmu_res, + .num_resources = ARRAY_SIZE(db8500_prcmu_res), + .dev = { + .platform_data = &db8500_prcmu_pdata, + }, +}; diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index a5e05f6..dbcb35c 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -14,6 +14,11 @@ struct ske_keypad_platform_data; struct pl022_ssp_controller; +struct platform_device; + +extern struct ab8500_platform_data ab8500_platdata; +extern struct prcmu_pdata db8500_prcmu_pdata; +extern struct platform_device db8500_prcmu_device; static inline struct platform_device * db8500_add_ske_keypad(struct device *parent, diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index d157992..9f95184 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -17,6 +17,8 @@ #include <mach/hardware.h> #include <mach/setup.h> +#include "id.h" + struct dbx500_asic_id dbx500_id; static unsigned int ux500_read_asicid(phys_addr_t addr) diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/id.h index 9c42642..bcc58a8 100644 --- a/arch/arm/mach-ux500/include/mach/id.h +++ b/arch/arm/mach-ux500/id.h @@ -61,9 +61,14 @@ static inline bool __attribute_const__ cpu_is_u8540(void) return dbx500_partnumber() == 0x8540; } +static inline bool __attribute_const__ cpu_is_u8580(void) +{ + return dbx500_partnumber() == 0x8580; +} + static inline bool cpu_is_ux540_family(void) { - return cpu_is_u9540() || cpu_is_u8540(); + return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580(); } /* @@ -115,6 +120,20 @@ static inline bool cpu_is_u8500v20_or_later(void) return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11()); } +/* + * 8540 revisions + */ + +static inline bool __attribute_const__ cpu_is_u8540v10(void) +{ + return cpu_is_u8540() && dbx500_revision() == 0xA0; +} + +static inline bool __attribute_const__ cpu_is_u8580v10(void) +{ + return cpu_is_u8580() && dbx500_revision() == 0xA0; +} + static inline bool ux500_is_svp(void) { return false; diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 28d16e7..5201dda 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -39,7 +39,6 @@ #ifndef __ASSEMBLY__ -#include <mach/id.h> extern void __iomem *_PRCMU_BASE; #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 7d34c52..d526dd8 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -38,15 +38,7 @@ #define MOP500_STMPE1601_IRQ_END \ MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) -/* AB8500 virtual gpio IRQ */ -#define AB8500_VIR_GPIO_NR_IRQS 16 - -#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \ - MOP500_STMPE1601_IRQ_END -#define MOP500_AB8500_VIR_GPIO_IRQ_END \ - (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS) - -#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END +#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ_END #define MOP500_IRQ_END MOP500_NR_IRQS diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 6be4c4d..bddce2b 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -28,8 +28,7 @@ extern struct device *ux500_soc_device_init(const char *soc_id); struct amba_device; extern void __init amba_add_devices(struct amba_device *devs[], int num); -struct sys_timer; -extern struct sys_timer ux500_timer; +extern void ux500_timer_init(void); #define __IO_DEV_DESC(x, sz) { \ .virtual = IO_ADDRESS(x), \ diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index d60ecd1..36969d5 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -54,6 +54,4 @@ static inline void arch_decomp_setup(void) ux500_uart_base = (void __iomem *)U8500_UART2_BASE; } -#define arch_decomp_wdog() /* nothing to do here */ - #endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 3db7782..18f7af3 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -16,14 +16,17 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> -#include <asm/hardware/gic.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> + #include <mach/hardware.h> #include <mach/setup.h> +#include "id.h" + /* This is called from headsmp.S to wakeup the secondary core */ extern void u8500_secondary_startup(void); @@ -91,7 +94,7 @@ static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct * */ write_pen_release(cpu_logical_map(cpu)); - smp_send_reschedule(cpu); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { @@ -155,8 +158,6 @@ static void __init ux500_smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 875309a..a6af0b8 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -17,6 +17,8 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#include "id.h" + #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer, U8500_TWD_BASE, IRQ_LOCALTIMER); @@ -46,7 +48,7 @@ const static struct of_device_id prcmu_timer_of_match[] __initconst = { { }, }; -static void __init ux500_timer_init(void) +void __init ux500_timer_init(void) { void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; @@ -99,14 +101,3 @@ dt_fail: clksrc_dbx500_prcmu_init(prcmu_timer_base); ux500_twd_init(); } - -static void ux500_timer_reset(void) -{ - nmdk_clkevt_reset(); - nmdk_clksrc_reset(); -} - -struct sys_timer ux500_timer = { - .init = ux500_timer_init, - .resume = ux500_timer_reset, -}; diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index 63d8e9f..1dba368 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -25,4 +25,9 @@ config MACH_VERSATILE_DT Include support for the ARM(R) Versatile/PB platform, using the device tree for discovery +config MACH_VERSATILE_AUTO + def_bool y + depends on !ARCH_VERSATILE_PB && !MACH_VERSATILE_AB + select MACH_VERSATILE_DT + endmenu diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 5d59294..25160ae 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -32,15 +32,16 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/irqchip/arm-vic.h> #include <linux/irqchip/versatile-fpga.h> #include <linux/gfp.h> #include <linux/clkdev.h> #include <linux/mtd/physmap.h> +#include <linux/bitops.h> #include <asm/irq.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/icst.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -65,16 +66,28 @@ #define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE) #define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE) +/* These PIC IRQs are valid in each configuration */ +#define PIC_VALID_ALL BIT(SIC_INT_KMI0) | BIT(SIC_INT_KMI1) | \ + BIT(SIC_INT_SCI3) | BIT(SIC_INT_UART3) | \ + BIT(SIC_INT_CLCD) | BIT(SIC_INT_TOUCH) | \ + BIT(SIC_INT_KEYPAD) | BIT(SIC_INT_DoC) | \ + BIT(SIC_INT_USB) | BIT(SIC_INT_PCI0) | \ + BIT(SIC_INT_PCI1) | BIT(SIC_INT_PCI2) | \ + BIT(SIC_INT_PCI3) #if 1 #define IRQ_MMCI0A IRQ_VICSOURCE22 #define IRQ_AACI IRQ_VICSOURCE24 #define IRQ_ETH IRQ_VICSOURCE25 #define PIC_MASK 0xFFD00000 +#define PIC_VALID PIC_VALID_ALL #else #define IRQ_MMCI0A IRQ_SIC_MMCI0A #define IRQ_AACI IRQ_SIC_AACI #define IRQ_ETH IRQ_SIC_ETH #define PIC_MASK 0 +#define PIC_VALID PIC_VALID_ALL | BIT(SIC_INT_MMCI0A) | \ + BIT(SIC_INT_MMCI1A) | BIT(SIC_INT_AACI) | \ + BIT(SIC_INT_ETH) #endif /* Lookup table for finding a DT node that represents the vic instance */ @@ -102,7 +115,7 @@ void __init versatile_init_irq(void) VERSATILE_SIC_BASE); fpga_irq_init(VA_SIC_BASE, "SIC", IRQ_SIC_START, - IRQ_VICSOURCE31, ~PIC_MASK, np); + IRQ_VICSOURCE31, PIC_VALID, np); /* * Interrupts on secondary controller from 0 to 8 are routed to @@ -114,7 +127,7 @@ void __init versatile_init_irq(void) writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE); } -static struct map_desc versatile_io_desc[] __initdata = { +static struct map_desc versatile_io_desc[] __initdata __maybe_unused = { { .virtual = IO_ADDRESS(VERSATILE_SYS_BASE), .pfn = __phys_to_pfn(VERSATILE_SYS_BASE), @@ -770,7 +783,7 @@ void __init versatile_init(void) /* * Set up timer interrupt, and return the current time in seconds. */ -static void __init versatile_timer_init(void) +void __init versatile_timer_init(void) { u32 val; @@ -797,8 +810,3 @@ static void __init versatile_timer_init(void) sp804_clocksource_init(TIMER3_VA_BASE, "timer3"); sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0"); } - -struct sys_timer versatile_timer = { - .init = versatile_timer_init, -}; - diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index 683e607..5c1b87d 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -29,7 +29,7 @@ extern void __init versatile_init(void); extern void __init versatile_init_early(void); extern void __init versatile_init_irq(void); extern void __init versatile_map_io(void); -extern struct sys_timer versatile_timer; +extern void versatile_timer_init(void); extern void versatile_restart(char, const char *); extern unsigned int mmc_status(struct device *dev); #ifdef CONFIG_OF diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h index 3dd0048..986e3d3 100644 --- a/arch/arm/mach-versatile/include/mach/uncompress.h +++ b/arch/arm/mach-versatile/include/mach/uncompress.h @@ -43,4 +43,3 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 2f84f40..e92e5e0 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/irq.h> #include <asm/mach/pci.h> @@ -327,12 +328,12 @@ static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) int irq; /* slot, pin, irq - * 24 1 27 - * 25 1 28 - * 26 1 29 - * 27 1 30 + * 24 1 IRQ_SIC_PCI0 + * 25 1 IRQ_SIC_PCI1 + * 26 1 IRQ_SIC_PCI2 + * 27 1 IRQ_SIC_PCI3 */ - irq = 27 + ((slot - 24 + pin - 1) & 3); + irq = IRQ_SIC_PCI0 + ((slot - 24 + pin - 1) & 3); return irq; } diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index 98f6549..1caef10 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -26,7 +26,6 @@ #include <mach/hardware.h> #include <asm/irq.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,8 +38,7 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, - .handle_irq = vic_handle_irq, - .timer = &versatile_timer, + .init_time = versatile_timer_init, .init_machine = versatile_init, .restart = versatile_restart, MACHINE_END diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index ae5ad3c..2558f2e 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -24,7 +24,6 @@ #include <linux/init.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <asm/hardware/vic.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -46,8 +45,7 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)") .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, - .handle_irq = vic_handle_irq, - .timer = &versatile_timer, + .init_time = versatile_timer_init, .init_machine = versatile_dt_init, .dt_compat = versatile_dt_match, .restart = versatile_restart, diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 1973833..611d140 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -27,7 +27,6 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <asm/hardware/vic.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -107,8 +106,7 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") .map_io = versatile_map_io, .init_early = versatile_init_early, .init_irq = versatile_init_irq, - .handle_irq = vic_handle_irq, - .timer = &versatile_timer, + .init_time = versatile_timer_init, .init_machine = versatile_pb_init, .restart = versatile_restart, MACHINE_END diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 60838dd..6f34497 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -10,10 +10,10 @@ #include <linux/amba/clcd.h> #include <linux/clkdev.h> #include <linux/vexpress.h> +#include <linux/irqchip/arm-gic.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/cache-l2x0.h> -#include <asm/hardware/gic.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> @@ -182,8 +182,6 @@ static void __init ct_ca9x4_init_cpu_map(void) for (i = 0; i < ncores; ++i) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init ct_ca9x4_smp_enable(unsigned int max_cpus) diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index c5d70de..dc1ace5 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -16,7 +16,6 @@ #include <linux/vexpress.h> #include <asm/smp_scu.h> -#include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <mach/motherboard.h> @@ -128,8 +127,6 @@ static void __init vexpress_dt_smp_init_cpus(void) for (i = 0; i < ncores; ++i) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 011661a..915683c 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -7,6 +7,7 @@ #include <linux/io.h> #include <linux/smp.h> #include <linux/init.h> +#include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/of_fdt.h> #include <linux/of_irq.h> @@ -30,7 +31,6 @@ #include <asm/mach/time.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/cache-l2x0.h> -#include <asm/hardware/gic.h> #include <asm/hardware/timer-sp.h> #include <mach/ct-ca9x4.h> @@ -291,10 +291,6 @@ static void __init v2m_timer_init(void) v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0); } -static struct sys_timer v2m_timer = { - .init = v2m_timer_init, -}; - static void __init v2m_init_early(void) { if (ct_desc->init_early) @@ -376,8 +372,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .map_io = v2m_map_io, .init_early = v2m_init_early, .init_irq = v2m_init_irq, - .timer = &v2m_timer, - .handle_irq = gic_handle_irq, + .init_time = v2m_timer_init, .init_machine = v2m_init, .restart = vexpress_restart, MACHINE_END @@ -434,16 +429,6 @@ void __init v2m_dt_init_early(void) } } -static struct of_device_id vexpress_irq_match[] __initdata = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - {} -}; - -static void __init v2m_dt_init_irq(void) -{ - of_irq_init(vexpress_irq_match); -} - static void __init v2m_dt_timer_init(void) { struct device_node *node = NULL; @@ -468,10 +453,6 @@ static void __init v2m_dt_timer_init(void) 24000000); } -static struct sys_timer v2m_dt_timer = { - .init = v2m_dt_timer_init, -}; - static const struct of_device_id v2m_dt_bus_match[] __initconst = { { .compatible = "simple-bus", }, { .compatible = "arm,amba-bus", }, @@ -497,9 +478,8 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .smp = smp_ops(vexpress_smp_ops), .map_io = v2m_dt_map_io, .init_early = v2m_dt_init_early, - .init_irq = v2m_dt_init_irq, - .timer = &v2m_dt_timer, + .init_irq = irqchip_init, + .init_time = v2m_dt_timer_init, .init_machine = v2m_dt_init, - .handle_irq = gic_handle_irq, .restart = vexpress_restart, MACHINE_END diff --git a/arch/arm/mach-virt/Kconfig b/arch/arm/mach-virt/Kconfig new file mode 100644 index 0000000..8958f0d --- /dev/null +++ b/arch/arm/mach-virt/Kconfig @@ -0,0 +1,10 @@ +config ARCH_VIRT + bool "Dummy Virtual Machine" if ARCH_MULTI_V7 + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_GIC + select ARM_ARCH_TIMER + select ARM_PSCI + select HAVE_SMP + select CPU_V7 + select SPARSE_IRQ + select USE_OF diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile new file mode 100644 index 0000000..042afc1 --- /dev/null +++ b/arch/arm/mach-virt/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel. +# + +obj-y := virt.o +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-virt/platsmp.c b/arch/arm/mach-virt/platsmp.c new file mode 100644 index 0000000..8badaab --- /dev/null +++ b/arch/arm/mach-virt/platsmp.c @@ -0,0 +1,58 @@ +/* + * Dummy Virtual Machine - does what it says on the tin. + * + * Copyright (C) 2012 ARM Ltd + * Author: Will Deacon <will.deacon@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/of.h> + +#include <linux/irqchip/arm-gic.h> + +#include <asm/psci.h> +#include <asm/smp_plat.h> + +extern void secondary_startup(void); + +static void __init virt_smp_init_cpus(void) +{ +} + +static void __init virt_smp_prepare_cpus(unsigned int max_cpus) +{ +} + +static int __cpuinit virt_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + if (psci_ops.cpu_on) + return psci_ops.cpu_on(cpu_logical_map(cpu), + __pa(secondary_startup)); + return -ENODEV; +} + +static void __cpuinit virt_secondary_init(unsigned int cpu) +{ + gic_secondary_init(0); +} + +struct smp_operations __initdata virt_smp_ops = { + .smp_init_cpus = virt_smp_init_cpus, + .smp_prepare_cpus = virt_smp_prepare_cpus, + .smp_secondary_init = virt_secondary_init, + .smp_boot_secondary = virt_boot_secondary, +}; diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c new file mode 100644 index 0000000..31666f6 --- /dev/null +++ b/arch/arm/mach-virt/virt.c @@ -0,0 +1,54 @@ +/* + * Dummy Virtual Machine - does what it says on the tin. + * + * Copyright (C) 2012 ARM Ltd + * Authors: Will Deacon <will.deacon@arm.com>, + * Marc Zyngier <marc.zyngier@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/irqchip.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/smp.h> + +#include <asm/arch_timer.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +static void __init virt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void __init virt_timer_init(void) +{ + WARN_ON(arch_timer_of_register() != 0); + WARN_ON(arch_timer_sched_clock_init() != 0); +} + +static const char *virt_dt_match[] = { + "linux,dummy-virt", + NULL +}; + +extern struct smp_operations virt_smp_ops; + +DT_MACHINE_START(VIRT, "Dummy Virtual Machine") + .init_irq = irqchip_init, + .init_time = virt_timer_init, + .init_machine = virt_init, + .smp = smp_ops(virt_smp_ops), + .dt_compat = virt_dt_match, +MACHINE_END diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index 2ed0b7d..e3e94b2 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -1,12 +1,34 @@ config ARCH_VT8500 - bool "VIA/WonderMedia 85xx" if ARCH_MULTI_V5 - default ARCH_VT8500_SINGLE + bool select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select CPU_ARM926T + select CLKSRC_OF select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select HAVE_CLK + select VT8500_TIMER help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. + +config ARCH_WM8505 + bool "VIA/Wondermedia 85xx and WM8650" + depends on ARCH_MULTI_V5 + select ARCH_VT8500 + select CPU_ARM926T + help + +config ARCH_WM8750 + bool "WonderMedia WM8750" + depends on ARCH_MULTI_V6 + select ARCH_VT8500 + select CPU_V6 + help + Support for WonderMedia WM8750 System-on-Chip. + +config ARCH_WM8850 + bool "WonderMedia WM8850" + depends on ARCH_MULTI_V7 + select ARCH_VT8500 + select CPU_V7 + help + Support for WonderMedia WM8850 System-on-Chip. diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile index e035251..92ceb24 100644 --- a/arch/arm/mach-vt8500/Makefile +++ b/arch/arm/mach-vt8500/Makefile @@ -1 +1 @@ -obj-$(CONFIG_ARCH_VT8500) += irq.o timer.o vt8500.o +obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h index 6f2b843..77611a6 100644 --- a/arch/arm/mach-vt8500/common.h +++ b/arch/arm/mach-vt8500/common.h @@ -18,7 +18,6 @@ #include <linux/of.h> -void __init vt8500_timer_init(void); int __init vt8500_irq_init(struct device_node *node, struct device_node *parent); diff --git a/arch/arm/mach-vt8500/include/mach/timex.h b/arch/arm/mach-vt8500/include/mach/timex.h deleted file mode 100644 index 8487e4c..0000000 --- a/arch/arm/mach-vt8500/include/mach/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/timex.h - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef MACH_TIMEX_H -#define MACH_TIMEX_H - -#define CLOCK_TICK_RATE (3000000) - -#endif /* MACH_TIMEX_H */ diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h deleted file mode 100644 index e6e81fd..0000000 --- a/arch/arm/mach-vt8500/include/mach/uncompress.h +++ /dev/null @@ -1,37 +0,0 @@ -/* arch/arm/mach-vt8500/include/mach/uncompress.h - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * Based on arch/arm/mach-dove/include/mach/uncompress.h - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#define UART0_PHYS 0xd8200000 -#define UART0_ADDR(x) *(volatile unsigned char *)(UART0_PHYS + x) - -static void putc(const char c) -{ - while (UART0_ADDR(0x1c) & 0x2) - /* Tx busy, wait and poll */; - - UART0_ADDR(0) = c; -} - -static void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c deleted file mode 100644 index 3dd21a4..0000000 --- a/arch/arm/mach-vt8500/timer.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * arch/arm/mach-vt8500/timer.c - * - * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * This file is copied and modified from the original timer.c provided by - * Alexey Charkov. Minor changes have been made for Device Tree Support. - */ - -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/delay.h> -#include <asm/mach/time.h> - -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#define VT8500_TIMER_OFFSET 0x0100 -#define VT8500_TIMER_HZ 3000000 -#define TIMER_MATCH_VAL 0x0000 -#define TIMER_COUNT_VAL 0x0010 -#define TIMER_STATUS_VAL 0x0014 -#define TIMER_IER_VAL 0x001c /* interrupt enable */ -#define TIMER_CTRL_VAL 0x0020 -#define TIMER_AS_VAL 0x0024 /* access status */ -#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */ -#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */ -#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */ - -#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) - -static void __iomem *regbase; - -static cycle_t vt8500_timer_read(struct clocksource *cs) -{ - int loops = msecs_to_loops(10); - writel(3, regbase + TIMER_CTRL_VAL); - while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE) - && --loops) - cpu_relax(); - return readl(regbase + TIMER_COUNT_VAL); -} - -static struct clocksource clocksource = { - .name = "vt8500_timer", - .rating = 200, - .read = vt8500_timer_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int vt8500_timer_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - int loops = msecs_to_loops(10); - cycle_t alarm = clocksource.read(&clocksource) + cycles; - while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE) - && --loops) - cpu_relax(); - writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL); - - if ((signed)(alarm - clocksource.read(&clocksource)) <= 16) - return -ETIME; - - writel(1, regbase + TIMER_IER_VAL); - - return 0; -} - -static void vt8500_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - switch (mode) { - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - break; - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - writel(readl(regbase + TIMER_CTRL_VAL) | 1, - regbase + TIMER_CTRL_VAL); - writel(0, regbase + TIMER_IER_VAL); - break; - } -} - -static struct clock_event_device clockevent = { - .name = "vt8500_timer", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = vt8500_timer_set_next_event, - .set_mode = vt8500_timer_set_mode, -}; - -static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - writel(0xf, regbase + TIMER_STATUS_VAL); - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction irq = { - .name = "vt8500_timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = vt8500_timer_interrupt, - .dev_id = &clockevent, -}; - -static struct of_device_id vt8500_timer_ids[] = { - { .compatible = "via,vt8500-timer" }, - { } -}; - -void __init vt8500_timer_init(void) -{ - struct device_node *np; - int timer_irq; - - np = of_find_matching_node(NULL, vt8500_timer_ids); - if (!np) { - pr_err("%s: Timer description missing from Device Tree\n", - __func__); - return; - } - regbase = of_iomap(np, 0); - if (!regbase) { - pr_err("%s: Missing iobase description in Device Tree\n", - __func__); - of_node_put(np); - return; - } - timer_irq = irq_of_parse_and_map(np, 0); - if (!timer_irq) { - pr_err("%s: Missing irq description in Device Tree\n", - __func__); - of_node_put(np); - return; - } - - writel(1, regbase + TIMER_CTRL_VAL); - writel(0xf, regbase + TIMER_STATUS_VAL); - writel(~0, regbase + TIMER_MATCH_VAL); - - if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ)) - pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n", - __func__, clocksource.name); - - clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4); - - /* copy-pasted from mach-msm; no idea */ - clockevent.max_delta_ns = - clockevent_delta2ns(0xf0000000, &clockevent); - clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent); - clockevent.cpumask = cpumask_of(0); - - if (setup_irq(timer_irq, &irq)) - pr_err("%s: setup_irq failed for %s\n", __func__, - clockevent.name); - clockevents_register_device(&clockevent); -} - diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 3c66d48..49e8005 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -18,6 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/clocksource.h> #include <linux/io.h> #include <linux/pm.h> @@ -175,22 +176,20 @@ static void __init vt8500_init_irq(void) of_irq_init(vt8500_irq_match); }; -static struct sys_timer vt8500_timer = { - .init = vt8500_timer_init, -}; - static const char * const vt8500_dt_compat[] = { "via,vt8500", "wm,wm8650", "wm,wm8505", + "wm,wm8750", + "wm,wm8850", }; DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") .dt_compat = vt8500_dt_compat, .map_io = vt8500_map_io, .init_irq = vt8500_init_irq, - .timer = &vt8500_timer, .init_machine = vt8500_init, + .init_time = clocksource_of_init, .restart = vt8500_restart, .handle_irq = vt8500_handle_irq, MACHINE_END diff --git a/arch/arm/mach-w90x900/include/mach/entry-macro.S b/arch/arm/mach-w90x900/include/mach/entry-macro.S index e286dac..0ff612a 100644 --- a/arch/arm/mach-w90x900/include/mach/entry-macro.S +++ b/arch/arm/mach-w90x900/include/mach/entry-macro.S @@ -19,8 +19,8 @@ mov \base, #AIC_BA - ldr \irqnr, [ \base, #AIC_IPER] - ldr \irqnr, [ \base, #AIC_ISNR] + ldr \irqnr, [\base, #AIC_IPER] + ldr \irqnr, [\base, #AIC_ISNR] cmp \irqnr, #0 .endm diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h index 0313021..4b7c324 100644 --- a/arch/arm/mach-w90x900/include/mach/uncompress.h +++ b/arch/arm/mach-w90x900/include/mach/uncompress.h @@ -24,8 +24,6 @@ #include <mach/map.h> #include <linux/serial_reg.h> -#define arch_decomp_wdog() - #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) static volatile u32 * const uart_base = (u32 *)UART0_PA; diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c index b4243e4..92f1c97 100644 --- a/arch/arm/mach-w90x900/mach-nuc910evb.c +++ b/arch/arm/mach-w90x900/mach-nuc910evb.c @@ -37,6 +37,6 @@ MACHINE_START(W90P910EVB, "W90P910EVB") .map_io = nuc910evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc910evb_init, - .timer = &nuc900_timer, + .init_time = nuc900_timer_init, .restart = nuc9xx_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c index 500fe59..26f7189 100644 --- a/arch/arm/mach-w90x900/mach-nuc950evb.c +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -40,6 +40,6 @@ MACHINE_START(W90P950EVB, "W90P950EVB") .map_io = nuc950evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc950evb_init, - .timer = &nuc900_timer, + .init_time = nuc900_timer_init, .restart = nuc9xx_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c index cbb3adc..9b4e73f 100644 --- a/arch/arm/mach-w90x900/mach-nuc960evb.c +++ b/arch/arm/mach-w90x900/mach-nuc960evb.c @@ -37,6 +37,6 @@ MACHINE_START(W90N960EVB, "W90N960EVB") .map_io = nuc960evb_map_io, .init_irq = nuc900_init_irq, .init_machine = nuc960evb_init, - .timer = &nuc900_timer, + .init_time = nuc900_timer_init, .restart = nuc9xx_restart, MACHINE_END diff --git a/arch/arm/mach-w90x900/nuc9xx.h b/arch/arm/mach-w90x900/nuc9xx.h index 91acb40..88ef4b2 100644 --- a/arch/arm/mach-w90x900/nuc9xx.h +++ b/arch/arm/mach-w90x900/nuc9xx.h @@ -15,10 +15,9 @@ * */ struct map_desc; -struct sys_timer; /* core initialisation functions */ extern void nuc900_init_irq(void); -extern struct sys_timer nuc900_timer; +extern void nuc900_timer_init(void); extern void nuc9xx_restart(char, const char *); diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c index fa27c49..30fbca8 100644 --- a/arch/arm/mach-w90x900/time.c +++ b/arch/arm/mach-w90x900/time.c @@ -91,7 +91,6 @@ static int nuc900_clockevent_setnextevent(unsigned long evt, static struct clock_event_device nuc900_clockevent_device = { .name = "nuc900-timer0", - .shift = 32, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = nuc900_clockevent_setmode, .set_next_event = nuc900_clockevent_setnextevent, @@ -133,15 +132,10 @@ static void __init nuc900_clockevents_init(void) __raw_writel(RESETINT, REG_TISR); setup_irq(IRQ_TIMER0, &nuc900_timer0_irq); - nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC, - nuc900_clockevent_device.shift); - nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff, - &nuc900_clockevent_device); - nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf, - &nuc900_clockevent_device); nuc900_clockevent_device.cpumask = cpumask_of(0); - clockevents_register_device(&nuc900_clockevent_device); + clockevents_config_and_register(&nuc900_clockevent_device, rate, + 0xf, 0xffffffff); } static void __init nuc900_clocksource_init(void) @@ -167,12 +161,8 @@ static void __init nuc900_clocksource_init(void) TDR_SHIFT, clocksource_mmio_readl_down); } -static void __init nuc900_timer_init(void) +void __init nuc900_timer_init(void) { nuc900_clocksource_init(); nuc900_clockevents_init(); } - -struct sys_timer nuc900_timer = { - .init = nuc900_timer_init, -}; diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index e16d4be..5c89832 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -24,6 +24,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/of.h> +#include <linux/irqchip.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -31,7 +32,6 @@ #include <asm/mach-types.h> #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include "common.h" @@ -55,19 +55,6 @@ static void __init xilinx_init_machine(void) of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL); } -static struct of_device_id irq_match[] __initdata = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - { } -}; - -/** - * xilinx_irq_init() - Interrupt controller initialization for the GIC. - */ -static void __init xilinx_irq_init(void) -{ - of_irq_init(irq_match); -} - #define SCU_PERIPH_PHYS 0xF8F00000 #define SCU_PERIPH_SIZE SZ_8K #define SCU_PERIPH_VIRT (VMALLOC_END - SCU_PERIPH_SIZE) @@ -90,16 +77,9 @@ static void __init xilinx_zynq_timer_init(void) xilinx_zynq_clocks_init(slcr); - xttcpss_timer_init(); + xttcps_timer_init(); } -/* - * Instantiate and initialize the system timer structure - */ -static struct sys_timer xttcpss_sys_timer = { - .init = xilinx_zynq_timer_init, -}; - /** * xilinx_map_io() - Create memory mappings needed for early I/O. */ @@ -117,9 +97,8 @@ static const char *xilinx_dt_match[] = { MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") .map_io = xilinx_map_io, - .init_irq = xilinx_irq_init, - .handle_irq = gic_handle_irq, + .init_irq = irqchip_init, .init_machine = xilinx_init_machine, - .timer = &xttcpss_sys_timer, + .init_time = xilinx_zynq_timer_init, .dt_compat = xilinx_dt_match, MACHINE_END diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index 954b91c..8b4dbba 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -17,6 +17,6 @@ #ifndef __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__ -void __init xttcpss_timer_init(void); +void __init xttcps_timer_init(void); #endif diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c index de3df28..f9fbc9c 100644 --- a/arch/arm/mach-zynq/timer.c +++ b/arch/arm/mach-zynq/timer.c @@ -15,39 +15,29 @@ * GNU General Public License for more details. */ -#include <linux/kernel.h> -#include <linux/init.h> #include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/types.h> -#include <linux/clocksource.h> #include <linux/clockchips.h> -#include <linux/io.h> -#include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/slab.h> #include <linux/clk-provider.h> - #include "common.h" /* * Timer Register Offset Definitions of Timer 1, Increment base address by 4 * and use same offsets for Timer 2 */ -#define XTTCPSS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ -#define XTTCPSS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ -#define XTTCPSS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ -#define XTTCPSS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ -#define XTTCPSS_MATCH_1_OFFSET 0x30 /* Match 1 Value Reg, RW */ -#define XTTCPSS_MATCH_2_OFFSET 0x3C /* Match 2 Value Reg, RW */ -#define XTTCPSS_MATCH_3_OFFSET 0x48 /* Match 3 Value Reg, RW */ -#define XTTCPSS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ -#define XTTCPSS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ - -#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1 - -/* Setup the timers to use pre-scaling, using a fixed value for now that will +#define XTTCPS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ +#define XTTCPS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ +#define XTTCPS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ +#define XTTCPS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ +#define XTTCPS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ +#define XTTCPS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ + +#define XTTCPS_CNT_CNTRL_DISABLE_MASK 0x1 + +/* + * Setup the timers to use pre-scaling, using a fixed value for now that will * work across most input frequency, but it may need to be more dynamic */ #define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ @@ -57,72 +47,73 @@ #define CNT_CNTRL_RESET (1<<4) /** - * struct xttcpss_timer - This definition defines local timer structure + * struct xttcps_timer - This definition defines local timer structure * * @base_addr: Base address of timer **/ -struct xttcpss_timer { +struct xttcps_timer { void __iomem *base_addr; }; -struct xttcpss_timer_clocksource { - struct xttcpss_timer xttc; +struct xttcps_timer_clocksource { + struct xttcps_timer xttc; struct clocksource cs; }; -#define to_xttcpss_timer_clksrc(x) \ - container_of(x, struct xttcpss_timer_clocksource, cs) +#define to_xttcps_timer_clksrc(x) \ + container_of(x, struct xttcps_timer_clocksource, cs) -struct xttcpss_timer_clockevent { - struct xttcpss_timer xttc; +struct xttcps_timer_clockevent { + struct xttcps_timer xttc; struct clock_event_device ce; struct clk *clk; }; -#define to_xttcpss_timer_clkevent(x) \ - container_of(x, struct xttcpss_timer_clockevent, ce) +#define to_xttcps_timer_clkevent(x) \ + container_of(x, struct xttcps_timer_clockevent, ce) /** - * xttcpss_set_interval - Set the timer interval value + * xttcps_set_interval - Set the timer interval value * * @timer: Pointer to the timer instance * @cycles: Timer interval ticks **/ -static void xttcpss_set_interval(struct xttcpss_timer *timer, +static void xttcps_set_interval(struct xttcps_timer *timer, unsigned long cycles) { u32 ctrl_reg; /* Disable the counter, set the counter value and re-enable counter */ - ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); + ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - __raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET); + __raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET); - /* Reset the counter (0x10) so that it starts from 0, one-shot - mode makes this needed for timing to be right. */ + /* + * Reset the counter (0x10) so that it starts from 0, one-shot + * mode makes this needed for timing to be right. + */ ctrl_reg |= CNT_CNTRL_RESET; - ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); } /** - * xttcpss_clock_event_interrupt - Clock event timer interrupt handler + * xttcps_clock_event_interrupt - Clock event timer interrupt handler * * @irq: IRQ number of the Timer - * @dev_id: void pointer to the xttcpss_timer instance + * @dev_id: void pointer to the xttcps_timer instance * * returns: Always IRQ_HANDLED - success **/ -static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id) +static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id) { - struct xttcpss_timer_clockevent *xttce = dev_id; - struct xttcpss_timer *timer = &xttce->xttc; + struct xttcps_timer_clockevent *xttce = dev_id; + struct xttcps_timer *timer = &xttce->xttc; /* Acknowledge the interrupt and call event handler */ - __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET), - timer->base_addr + XTTCPSS_ISR_OFFSET); + __raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET); xttce->ce.event_handler(&xttce->ce); @@ -136,46 +127,46 @@ static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id) **/ static cycle_t __xttc_clocksource_read(struct clocksource *cs) { - struct xttcpss_timer *timer = &to_xttcpss_timer_clksrc(cs)->xttc; + struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc; return (cycle_t)__raw_readl(timer->base_addr + - XTTCPSS_COUNT_VAL_OFFSET); + XTTCPS_COUNT_VAL_OFFSET); } /** - * xttcpss_set_next_event - Sets the time interval for next event + * xttcps_set_next_event - Sets the time interval for next event * * @cycles: Timer interval ticks * @evt: Address of clock event instance * * returns: Always 0 - success **/ -static int xttcpss_set_next_event(unsigned long cycles, +static int xttcps_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt); - struct xttcpss_timer *timer = &xttce->xttc; + struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt); + struct xttcps_timer *timer = &xttce->xttc; - xttcpss_set_interval(timer, cycles); + xttcps_set_interval(timer, cycles); return 0; } /** - * xttcpss_set_mode - Sets the mode of timer + * xttcps_set_mode - Sets the mode of timer * * @mode: Mode to be set * @evt: Address of clock event instance **/ -static void xttcpss_set_mode(enum clock_event_mode mode, +static void xttcps_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt); - struct xttcpss_timer *timer = &xttce->xttc; + struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt); + struct xttcps_timer *timer = &xttce->xttc; u32 ctrl_reg; switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - xttcpss_set_interval(timer, + xttcps_set_interval(timer, DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk), PRESCALE * HZ)); break; @@ -183,17 +174,17 @@ static void xttcpss_set_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: ctrl_reg = __raw_readl(timer->base_addr + - XTTCPSS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK; + XTTCPS_CNT_CNTRL_OFFSET); + ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK; __raw_writel(ctrl_reg, - timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); break; case CLOCK_EVT_MODE_RESUME: ctrl_reg = __raw_readl(timer->base_addr + - XTTCPSS_CNT_CNTRL_OFFSET); - ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; + XTTCPS_CNT_CNTRL_OFFSET); + ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; __raw_writel(ctrl_reg, - timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); break; } } @@ -201,7 +192,7 @@ static void xttcpss_set_mode(enum clock_event_mode mode, static void __init zynq_ttc_setup_clocksource(struct device_node *np, void __iomem *base) { - struct xttcpss_timer_clocksource *ttccs; + struct xttcps_timer_clocksource *ttccs; struct clk *clk; int err; u32 reg; @@ -230,11 +221,11 @@ static void __init zynq_ttc_setup_clocksource(struct device_node *np, ttccs->cs.mask = CLOCKSOURCE_MASK(16); ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS; - __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPSS_IER_OFFSET); + __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPS_IER_OFFSET); __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, - ttccs->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET); + ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET); __raw_writel(CNT_CNTRL_RESET, - ttccs->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET); err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE); if (WARN_ON(err)) @@ -244,7 +235,7 @@ static void __init zynq_ttc_setup_clocksource(struct device_node *np, static void __init zynq_ttc_setup_clockevent(struct device_node *np, void __iomem *base) { - struct xttcpss_timer_clockevent *ttcce; + struct xttcps_timer_clockevent *ttcce; int err, irq; u32 reg; @@ -272,17 +263,18 @@ static void __init zynq_ttc_setup_clockevent(struct device_node *np, ttcce->ce.name = np->name; ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - ttcce->ce.set_next_event = xttcpss_set_next_event; - ttcce->ce.set_mode = xttcpss_set_mode; + ttcce->ce.set_next_event = xttcps_set_next_event; + ttcce->ce.set_mode = xttcps_set_mode; ttcce->ce.rating = 200; ttcce->ce.irq = irq; + ttcce->ce.cpumask = cpu_possible_mask; - __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET); __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, - ttcce->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET); - __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPSS_IER_OFFSET); + ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET); + __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPS_IER_OFFSET); - err = request_irq(irq, xttcpss_clock_event_interrupt, IRQF_TIMER, + err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER, np->name, ttcce); if (WARN_ON(err)) return; @@ -301,12 +293,12 @@ static const __initconst struct of_device_id zynq_ttc_match[] = { }; /** - * xttcpss_timer_init - Initialize the timer + * xttcps_timer_init - Initialize the timer * * Initializes the timer hardware and register the clock source and clock event * timers with Linux kernal timer framework **/ -void __init xttcpss_timer_init(void) +void __init xttcps_timer_init(void) { struct device_node *np; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 3fd629d..025d173 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -629,8 +629,9 @@ config ARM_THUMBEE make use of it. Say N for code that can run on CPUs without ThumbEE. config ARM_VIRT_EXT - bool "Native support for the ARM Virtualization Extensions" - depends on MMU && CPU_V7 + bool + depends on MMU + default y if CPU_V7 help Enable the kernel to make use of the ARM Virtualization Extensions to install hypervisors without run-time firmware @@ -640,11 +641,6 @@ config ARM_VIRT_EXT use of this feature. Refer to Documentation/arm/Booting for details. - It is safe to enable this option even if the kernel may not be - booted in HYP mode, may not have support for the - virtualization extensions, or may be booted with a - non-compliant bootloader. - config SWP_EMULATE bool "Emulate SWP/SWPB instructions" depends on !CPU_USE_DOMAINS && CPU_V7 diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 8a9c4cb..4e333fa 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -6,7 +6,7 @@ obj-y := dma-mapping.o extable.o fault.o init.o \ iomap.o obj-$(CONFIG_MMU) += fault-armv.o flush.o idmap.o ioremap.o \ - mmap.o pgd.o mmu.o vmregion.o + mmap.o pgd.o mmu.o ifneq ($(CONFIG_MMU),y) obj-y += nommu.o diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 7539ec2..15451ee 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -19,6 +19,52 @@ #include "proc-macros.S" /* + * The secondary kernel init calls v7_flush_dcache_all before it enables + * the L1; however, the L1 comes out of reset in an undefined state, so + * the clean + invalidate performed by v7_flush_dcache_all causes a bunch + * of cache lines with uninitialized data and uninitialized tags to get + * written out to memory, which does really unpleasant things to the main + * processor. We fix this by performing an invalidate, rather than a + * clean + invalidate, before jumping into the kernel. + * + * This function is cloned from arch/arm/mach-tegra/headsmp.S, and needs + * to be called for both secondary cores startup and primary core resume + * procedures. + */ +ENTRY(v7_invalidate_l1) + mov r0, #0 + mcr p15, 2, r0, c0, c0, 0 + mrc p15, 1, r0, c0, c0, 0 + + ldr r1, =0x7fff + and r2, r1, r0, lsr #13 + + ldr r1, =0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) + mcr p15, 0, r5, c7, c6, 2 + bgt 2b + cmp r2, #0 + bgt 1b + dsb + isb + mov pc, lr +ENDPROC(v7_invalidate_l1) + +/* * v7_flush_icache_all() * * Flush the whole I-cache. diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index bc4a5e9..7a05111 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -34,6 +34,9 @@ * The ASID is used to tag entries in the CPU caches and TLBs. * The context ID is used by debuggers and trace logic, and * should be unique within all running processes. + * + * In big endian operation, the two 32 bit words are swapped if accesed by + * non 64-bit operations. */ #define ASID_FIRST_VERSION (1ULL << ASID_BITS) #define NUM_USER_ASIDS (ASID_FIRST_VERSION - 1) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index dda3904..c7e3759 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -186,13 +186,24 @@ static u64 get_coherent_dma_mask(struct device *dev) static void __dma_clear_buffer(struct page *page, size_t size) { - void *ptr; /* * Ensure that the allocated pages are zeroed, and that any data * lurking in the kernel direct-mapped region is invalidated. */ - ptr = page_address(page); - if (ptr) { + if (PageHighMem(page)) { + phys_addr_t base = __pfn_to_phys(page_to_pfn(page)); + phys_addr_t end = base + size; + while (size > 0) { + void *ptr = kmap_atomic(page); + memset(ptr, 0, PAGE_SIZE); + dmac_flush_range(ptr, ptr + PAGE_SIZE); + kunmap_atomic(ptr); + page++; + size -= PAGE_SIZE; + } + outer_flush_range(base, end); + } else { + void *ptr = page_address(page); memset(ptr, 0, size); dmac_flush_range(ptr, ptr + size); outer_flush_range(__pa(ptr), __pa(ptr) + size); @@ -243,7 +254,8 @@ static void __dma_free_buffer(struct page *page, size_t size) #endif static void *__alloc_from_contiguous(struct device *dev, size_t size, - pgprot_t prot, struct page **ret_page); + pgprot_t prot, struct page **ret_page, + const void *caller); static void *__alloc_remap_buffer(struct device *dev, size_t size, gfp_t gfp, pgprot_t prot, struct page **ret_page, @@ -346,10 +358,11 @@ static int __init atomic_pool_init(void) goto no_pages; if (IS_ENABLED(CONFIG_CMA)) - ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); + ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, + atomic_pool_init); else ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, - &page, NULL); + &page, atomic_pool_init); if (ptr) { int i; @@ -542,27 +555,41 @@ static int __free_from_pool(void *start, size_t size) } static void *__alloc_from_contiguous(struct device *dev, size_t size, - pgprot_t prot, struct page **ret_page) + pgprot_t prot, struct page **ret_page, + const void *caller) { unsigned long order = get_order(size); size_t count = size >> PAGE_SHIFT; struct page *page; + void *ptr; page = dma_alloc_from_contiguous(dev, count, order); if (!page) return NULL; __dma_clear_buffer(page, size); - __dma_remap(page, size, prot); + if (PageHighMem(page)) { + ptr = __dma_alloc_remap(page, size, GFP_KERNEL, prot, caller); + if (!ptr) { + dma_release_from_contiguous(dev, page, count); + return NULL; + } + } else { + __dma_remap(page, size, prot); + ptr = page_address(page); + } *ret_page = page; - return page_address(page); + return ptr; } static void __free_from_contiguous(struct device *dev, struct page *page, - size_t size) + void *cpu_addr, size_t size) { - __dma_remap(page, size, pgprot_kernel); + if (PageHighMem(page)) + __dma_free_remap(cpu_addr, size); + else + __dma_remap(page, size, pgprot_kernel); dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT); } @@ -583,9 +610,9 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot) #define __get_dma_pgprot(attrs, prot) __pgprot(0) #define __alloc_remap_buffer(dev, size, gfp, prot, ret, c) NULL #define __alloc_from_pool(size, ret_page) NULL -#define __alloc_from_contiguous(dev, size, prot, ret) NULL +#define __alloc_from_contiguous(dev, size, prot, ret, c) NULL #define __free_from_pool(cpu_addr, size) 0 -#define __free_from_contiguous(dev, page, size) do { } while (0) +#define __free_from_contiguous(dev, page, cpu_addr, size) do { } while (0) #define __dma_free_remap(cpu_addr, size) do { } while (0) #endif /* CONFIG_MMU */ @@ -645,7 +672,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, else if (!IS_ENABLED(CONFIG_CMA)) addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); else - addr = __alloc_from_contiguous(dev, size, prot, &page); + addr = __alloc_from_contiguous(dev, size, prot, &page, caller); if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); @@ -739,7 +766,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, * Non-atomic allocations cannot be freed with IRQs disabled */ WARN_ON(irqs_disabled()); - __free_from_contiguous(dev, page, size); + __free_from_contiguous(dev, page, cpu_addr, size); } } @@ -1002,6 +1029,9 @@ static inline dma_addr_t __alloc_iova(struct dma_iommu_mapping *mapping, unsigned int count, start; unsigned long flags; + if (order > CONFIG_ARM_DMA_IOMMU_ALIGNMENT) + order = CONFIG_ARM_DMA_IOMMU_ALIGNMENT; + count = ((PAGE_ALIGN(size) >> PAGE_SHIFT) + (1 << mapping->order) - 1) >> mapping->order; @@ -1068,12 +1098,17 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, return pages; } + /* + * IOMMU can map any pages, so himem can also be used here + */ + gfp |= __GFP_NOWARN | __GFP_HIGHMEM; + while (count) { int j, order = __fls(count); - pages[i] = alloc_pages(gfp | __GFP_NOWARN, order); + pages[i] = alloc_pages(gfp, order); while (!pages[i] && order) - pages[i] = alloc_pages(gfp | __GFP_NOWARN, --order); + pages[i] = alloc_pages(gfp, --order); if (!pages[i]) goto error; @@ -1257,11 +1292,11 @@ err_mapping: return NULL; } -static void __iommu_free_atomic(struct device *dev, struct page **pages, +static void __iommu_free_atomic(struct device *dev, void *cpu_addr, dma_addr_t handle, size_t size) { __iommu_remove_mapping(dev, handle, size); - __free_from_pool(page_address(pages[0]), size); + __free_from_pool(cpu_addr, size); } static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, @@ -1344,7 +1379,7 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, } if (__in_atomic_pool(cpu_addr, size)) { - __iommu_free_atomic(dev, pages, handle, size); + __iommu_free_atomic(dev, cpu_addr, handle, size); return; } @@ -1732,6 +1767,8 @@ struct dma_map_ops iommu_ops = { .unmap_sg = arm_iommu_unmap_sg, .sync_sg_for_cpu = arm_iommu_sync_sg_for_cpu, .sync_sg_for_device = arm_iommu_sync_sg_for_device, + + .set_dma_mask = arm_dma_set_mask, }; struct dma_map_ops iommu_coherent_ops = { @@ -1745,6 +1782,8 @@ struct dma_map_ops iommu_coherent_ops = { .map_sg = arm_coherent_iommu_map_sg, .unmap_sg = arm_coherent_iommu_unmap_sg, + + .set_dma_mask = arm_dma_set_mask, }; /** @@ -1799,6 +1838,7 @@ err2: err: return ERR_PTR(err); } +EXPORT_SYMBOL_GPL(arm_iommu_create_mapping); static void release_iommu_mapping(struct kref *kref) { @@ -1815,6 +1855,7 @@ void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping) if (mapping) kref_put(&mapping->kref, release_iommu_mapping); } +EXPORT_SYMBOL_GPL(arm_iommu_release_mapping); /** * arm_iommu_attach_device @@ -1843,5 +1884,32 @@ int arm_iommu_attach_device(struct device *dev, pr_debug("Attached IOMMU controller to %s device.\n", dev_name(dev)); return 0; } +EXPORT_SYMBOL_GPL(arm_iommu_attach_device); + +/** + * arm_iommu_detach_device + * @dev: valid struct device pointer + * + * Detaches the provided device from a previously attached map. + * This voids the dma operations (dma_map_ops pointer) + */ +void arm_iommu_detach_device(struct device *dev) +{ + struct dma_iommu_mapping *mapping; + + mapping = to_dma_iommu_mapping(dev); + if (!mapping) { + dev_warn(dev, "Not attached\n"); + return; + } + + iommu_detach_device(mapping->domain, dev); + kref_put(&mapping->kref, release_iommu_mapping); + mapping = NULL; + set_dma_ops(dev, NULL); + + pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev)); +} +EXPORT_SYMBOL_GPL(arm_iommu_detach_device); #endif diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c index 99db769..2dffc01 100644 --- a/arch/arm/mm/idmap.c +++ b/arch/arm/mm/idmap.c @@ -1,4 +1,6 @@ +#include <linux/module.h> #include <linux/kernel.h> +#include <linux/slab.h> #include <asm/cputype.h> #include <asm/idmap.h> @@ -6,6 +8,7 @@ #include <asm/pgtable.h> #include <asm/sections.h> #include <asm/system_info.h> +#include <asm/virt.h> pgd_t *idmap_pgd; @@ -59,11 +62,17 @@ static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end, } while (pud++, addr = next, addr != end); } -static void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end) +static void identity_mapping_add(pgd_t *pgd, const char *text_start, + const char *text_end, unsigned long prot) { - unsigned long prot, next; + unsigned long addr, end; + unsigned long next; + + addr = virt_to_phys(text_start); + end = virt_to_phys(text_end); + + prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF; - prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF; if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) prot |= PMD_BIT4; @@ -74,28 +83,52 @@ static void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long e } while (pgd++, addr = next, addr != end); } +#if defined(CONFIG_ARM_VIRT_EXT) && defined(CONFIG_ARM_LPAE) +pgd_t *hyp_pgd; + +extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; + +static int __init init_static_idmap_hyp(void) +{ + hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); + if (!hyp_pgd) + return -ENOMEM; + + pr_info("Setting up static HYP identity map for 0x%p - 0x%p\n", + __hyp_idmap_text_start, __hyp_idmap_text_end); + identity_mapping_add(hyp_pgd, __hyp_idmap_text_start, + __hyp_idmap_text_end, PMD_SECT_AP1); + + return 0; +} +#else +static int __init init_static_idmap_hyp(void) +{ + return 0; +} +#endif + extern char __idmap_text_start[], __idmap_text_end[]; static int __init init_static_idmap(void) { - phys_addr_t idmap_start, idmap_end; + int ret; idmap_pgd = pgd_alloc(&init_mm); if (!idmap_pgd) return -ENOMEM; - /* Add an identity mapping for the physical address of the section. */ - idmap_start = virt_to_phys((void *)__idmap_text_start); - idmap_end = virt_to_phys((void *)__idmap_text_end); + pr_info("Setting up static identity map for 0x%p - 0x%p\n", + __idmap_text_start, __idmap_text_end); + identity_mapping_add(idmap_pgd, __idmap_text_start, + __idmap_text_end, 0); - pr_info("Setting up static identity map for 0x%llx - 0x%llx\n", - (long long)idmap_start, (long long)idmap_end); - identity_mapping_add(idmap_pgd, idmap_start, idmap_end); + ret = init_static_idmap_hyp(); /* Flush L1 for the hardware to see this page table content */ flush_cache_louis(); - return 0; + return ret; } early_initcall(init_static_idmap); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 88fd86c..04d9006 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -39,6 +39,70 @@ #include <asm/mach/pci.h> #include "mm.h" + +LIST_HEAD(static_vmlist); + +static struct static_vm *find_static_vm_paddr(phys_addr_t paddr, + size_t size, unsigned int mtype) +{ + struct static_vm *svm; + struct vm_struct *vm; + + list_for_each_entry(svm, &static_vmlist, list) { + vm = &svm->vm; + if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + continue; + if ((vm->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype)) + continue; + + if (vm->phys_addr > paddr || + paddr + size - 1 > vm->phys_addr + vm->size - 1) + continue; + + return svm; + } + + return NULL; +} + +struct static_vm *find_static_vm_vaddr(void *vaddr) +{ + struct static_vm *svm; + struct vm_struct *vm; + + list_for_each_entry(svm, &static_vmlist, list) { + vm = &svm->vm; + + /* static_vmlist is ascending order */ + if (vm->addr > vaddr) + break; + + if (vm->addr <= vaddr && vm->addr + vm->size > vaddr) + return svm; + } + + return NULL; +} + +void __init add_static_vm_early(struct static_vm *svm) +{ + struct static_vm *curr_svm; + struct vm_struct *vm; + void *vaddr; + + vm = &svm->vm; + vm_area_add_early(vm); + vaddr = vm->addr; + + list_for_each_entry(curr_svm, &static_vmlist, list) { + vm = &curr_svm->vm; + + if (vm->addr > vaddr) + break; + } + list_add_tail(&svm->list, &curr_svm->list); +} + int ioremap_page(unsigned long virt, unsigned long phys, const struct mem_type *mtype) { @@ -197,13 +261,14 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, const struct mem_type *type; int err; unsigned long addr; - struct vm_struct * area; + struct vm_struct *area; + phys_addr_t paddr = __pfn_to_phys(pfn); #ifndef CONFIG_ARM_LPAE /* * High mappings must be supersection aligned */ - if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK)) + if (pfn >= 0x100000 && (paddr & ~SUPERSECTION_MASK)) return NULL; #endif @@ -219,24 +284,16 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, /* * Try to reuse one of the static mapping whenever possible. */ - read_lock(&vmlist_lock); - for (area = vmlist; area; area = area->next) { - if (!size || (sizeof(phys_addr_t) == 4 && pfn >= 0x100000)) - break; - if (!(area->flags & VM_ARM_STATIC_MAPPING)) - continue; - if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype)) - continue; - if (__phys_to_pfn(area->phys_addr) > pfn || - __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1) - continue; - /* we can drop the lock here as we know *area is static */ - read_unlock(&vmlist_lock); - addr = (unsigned long)area->addr; - addr += __pfn_to_phys(pfn) - area->phys_addr; - return (void __iomem *) (offset + addr); + if (size && !(sizeof(phys_addr_t) == 4 && pfn >= 0x100000)) { + struct static_vm *svm; + + svm = find_static_vm_paddr(paddr, size, mtype); + if (svm) { + addr = (unsigned long)svm->vm.addr; + addr += paddr - svm->vm.phys_addr; + return (void __iomem *) (offset + addr); + } } - read_unlock(&vmlist_lock); /* * Don't allow RAM to be mapped - this causes problems with ARMv6+ @@ -248,21 +305,21 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, if (!area) return NULL; addr = (unsigned long)area->addr; - area->phys_addr = __pfn_to_phys(pfn); + area->phys_addr = paddr; #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) if (DOMAIN_IO == 0 && (((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) || cpu_is_xsc3()) && pfn >= 0x100000 && - !((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) { + !((paddr | size | addr) & ~SUPERSECTION_MASK)) { area->flags |= VM_ARM_SECTION_MAPPING; err = remap_area_supersections(addr, pfn, size, type); - } else if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) { + } else if (!((paddr | size | addr) & ~PMD_MASK)) { area->flags |= VM_ARM_SECTION_MAPPING; err = remap_area_sections(addr, pfn, size, type); } else #endif - err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn), + err = ioremap_page_range(addr, addr + size, paddr, __pgprot(type->prot_pte)); if (err) { @@ -346,34 +403,28 @@ __arm_ioremap_exec(unsigned long phys_addr, size_t size, bool cached) void __iounmap(volatile void __iomem *io_addr) { void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr); - struct vm_struct *vm; + struct static_vm *svm; + + /* If this is a static mapping, we must leave it alone */ + svm = find_static_vm_vaddr(addr); + if (svm) + return; - read_lock(&vmlist_lock); - for (vm = vmlist; vm; vm = vm->next) { - if (vm->addr > addr) - break; - if (!(vm->flags & VM_IOREMAP)) - continue; - /* If this is a static mapping we must leave it alone */ - if ((vm->flags & VM_ARM_STATIC_MAPPING) && - (vm->addr <= addr) && (vm->addr + vm->size > addr)) { - read_unlock(&vmlist_lock); - return; - } #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) + { + struct vm_struct *vm; + + vm = find_vm_area(addr); + /* * If this is a section based mapping we need to handle it * specially as the VM subsystem does not know how to handle * such a beast. */ - if ((vm->addr == addr) && - (vm->flags & VM_ARM_SECTION_MAPPING)) { + if (vm && (vm->flags & VM_ARM_SECTION_MAPPING)) unmap_area_sections((unsigned long)vm->addr, vm->size); - break; - } -#endif } - read_unlock(&vmlist_lock); +#endif vunmap(addr); } diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index a8ee92d..d5a4e9a 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -1,4 +1,6 @@ #ifdef CONFIG_MMU +#include <linux/list.h> +#include <linux/vmalloc.h> /* the upper-most page table pointer */ extern pmd_t *top_pmd; @@ -65,6 +67,16 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page /* consistent regions used by dma_alloc_attrs() */ #define VM_ARM_DMA_CONSISTENT 0x20000000 + +struct static_vm { + struct vm_struct vm; + struct list_head list; +}; + +extern struct list_head static_vmlist; +extern struct static_vm *find_static_vm_vaddr(void *vaddr); +extern __init void add_static_vm_early(struct static_vm *svm); + #endif #ifdef CONFIG_ZONE_DMA diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index ce328c7..e95a996 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -57,6 +57,9 @@ static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK; static unsigned int ecc_mask __initdata = 0; pgprot_t pgprot_user; pgprot_t pgprot_kernel; +pgprot_t pgprot_hyp_device; +pgprot_t pgprot_s2; +pgprot_t pgprot_s2_device; EXPORT_SYMBOL(pgprot_user); EXPORT_SYMBOL(pgprot_kernel); @@ -66,34 +69,46 @@ struct cachepolicy { unsigned int cr_mask; pmdval_t pmd; pteval_t pte; + pteval_t pte_s2; }; +#ifdef CONFIG_ARM_LPAE +#define s2_policy(policy) policy +#else +#define s2_policy(policy) 0 +#endif + static struct cachepolicy cache_policies[] __initdata = { { .policy = "uncached", .cr_mask = CR_W|CR_C, .pmd = PMD_SECT_UNCACHED, .pte = L_PTE_MT_UNCACHED, + .pte_s2 = s2_policy(L_PTE_S2_MT_UNCACHED), }, { .policy = "buffered", .cr_mask = CR_C, .pmd = PMD_SECT_BUFFERED, .pte = L_PTE_MT_BUFFERABLE, + .pte_s2 = s2_policy(L_PTE_S2_MT_UNCACHED), }, { .policy = "writethrough", .cr_mask = 0, .pmd = PMD_SECT_WT, .pte = L_PTE_MT_WRITETHROUGH, + .pte_s2 = s2_policy(L_PTE_S2_MT_WRITETHROUGH), }, { .policy = "writeback", .cr_mask = 0, .pmd = PMD_SECT_WB, .pte = L_PTE_MT_WRITEBACK, + .pte_s2 = s2_policy(L_PTE_S2_MT_WRITEBACK), }, { .policy = "writealloc", .cr_mask = 0, .pmd = PMD_SECT_WBWA, .pte = L_PTE_MT_WRITEALLOC, + .pte_s2 = s2_policy(L_PTE_S2_MT_WRITEBACK), } }; @@ -310,6 +325,7 @@ static void __init build_mem_type_table(void) struct cachepolicy *cp; unsigned int cr = get_cr(); pteval_t user_pgprot, kern_pgprot, vecs_pgprot; + pteval_t hyp_device_pgprot, s2_pgprot, s2_device_pgprot; int cpu_arch = cpu_architecture(); int i; @@ -421,6 +437,8 @@ static void __init build_mem_type_table(void) */ cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; + s2_pgprot = cp->pte_s2; + hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte; /* * ARMv6 and above have extended page tables. @@ -444,6 +462,7 @@ static void __init build_mem_type_table(void) user_pgprot |= L_PTE_SHARED; kern_pgprot |= L_PTE_SHARED; vecs_pgprot |= L_PTE_SHARED; + s2_pgprot |= L_PTE_SHARED; mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S; mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; @@ -498,6 +517,9 @@ static void __init build_mem_type_table(void) pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot); pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | kern_pgprot); + pgprot_s2 = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | s2_pgprot); + pgprot_s2_device = __pgprot(s2_device_pgprot); + pgprot_hyp_device = __pgprot(hyp_device_pgprot); mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; @@ -757,21 +779,24 @@ void __init iotable_init(struct map_desc *io_desc, int nr) { struct map_desc *md; struct vm_struct *vm; + struct static_vm *svm; if (!nr) return; - vm = early_alloc_aligned(sizeof(*vm) * nr, __alignof__(*vm)); + svm = early_alloc_aligned(sizeof(*svm) * nr, __alignof__(*svm)); for (md = io_desc; nr; md++, nr--) { create_mapping(md); + + vm = &svm->vm; vm->addr = (void *)(md->virtual & PAGE_MASK); vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK)); vm->phys_addr = __pfn_to_phys(md->pfn); vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; vm->flags |= VM_ARM_MTYPE(md->type); vm->caller = iotable_init; - vm_area_add_early(vm++); + add_static_vm_early(svm++); } } @@ -779,13 +804,16 @@ void __init vm_reserve_area_early(unsigned long addr, unsigned long size, void *caller) { struct vm_struct *vm; + struct static_vm *svm; + + svm = early_alloc_aligned(sizeof(*svm), __alignof__(*svm)); - vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); + vm = &svm->vm; vm->addr = (void *)addr; vm->size = size; vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; vm->caller = caller; - vm_area_add_early(vm); + add_static_vm_early(svm); } #ifndef CONFIG_ARM_LPAE @@ -810,14 +838,13 @@ static void __init pmd_empty_section_gap(unsigned long addr) static void __init fill_pmd_gaps(void) { + struct static_vm *svm; struct vm_struct *vm; unsigned long addr, next = 0; pmd_t *pmd; - /* we're still single threaded hence no lock needed here */ - for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING))) - continue; + list_for_each_entry(svm, &static_vmlist, list) { + vm = &svm->vm; addr = (unsigned long)vm->addr; if (addr < next) continue; @@ -857,19 +884,12 @@ static void __init fill_pmd_gaps(void) #if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H) static void __init pci_reserve_io(void) { - struct vm_struct *vm; - unsigned long addr; + struct static_vm *svm; - /* we're still single threaded hence no lock needed here */ - for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & VM_ARM_STATIC_MAPPING)) - continue; - addr = (unsigned long)vm->addr; - addr &= ~(SZ_2M - 1); - if (addr == PCI_IO_VIRT_BASE) - return; + svm = find_static_vm_vaddr((void *)PCI_IO_VIRT_BASE); + if (svm) + return; - } vm_reserve_area_early(PCI_IO_VIRT_BASE, SZ_2M, pci_reserve_io); } #else diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index eb6aa73..f9a0aa7 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -38,9 +38,14 @@ /* * mmid - get context id from mm pointer (mm->context.id) + * note, this field is 64bit, so in big-endian the two words are swapped too. */ .macro mmid, rd, rn +#ifdef __ARMEB__ + ldr \rd, [\rn, #MM_CONTEXT_ID + 4 ] +#else ldr \rd, [\rn, #MM_CONTEXT_ID] +#endif .endm /* diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 09c5233..bcaaa8d 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -101,7 +101,7 @@ ENTRY(cpu_v6_dcache_clean_area) ENTRY(cpu_v6_switch_mm) #ifdef CONFIG_MMU mov r2, #0 - ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id + mmid r1, r1 @ get mm->context.id ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) ALT_UP(orr r0, r0, #TTB_FLAGS_UP) mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 6d98c13..78f520b 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -40,7 +40,7 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_MMU mov r2, #0 - ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id + mmid r1, r1 @ get mm->context.id ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) ALT_UP(orr r0, r0, #TTB_FLAGS_UP) #ifdef CONFIG_ARM_ERRATA_430973 diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 7b56386..50bf1da 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -47,7 +47,7 @@ */ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_MMU - ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id + mmid r1, r1 @ get mm->context.id and r3, r1, #0xff mov r3, r3, lsl #(48 - 32) @ ASID mcrr p15, 0, r0, r3, c2 @ set TTB 0 diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c deleted file mode 100644 index a631016..0000000 --- a/arch/arm/mm/vmregion.c +++ /dev/null @@ -1,205 +0,0 @@ -#include <linux/fs.h> -#include <linux/spinlock.h> -#include <linux/list.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/slab.h> - -#include "vmregion.h" - -/* - * VM region handling support. - * - * This should become something generic, handling VM region allocations for - * vmalloc and similar (ioremap, module space, etc). - * - * I envisage vmalloc()'s supporting vm_struct becoming: - * - * struct vm_struct { - * struct vmregion region; - * unsigned long flags; - * struct page **pages; - * unsigned int nr_pages; - * unsigned long phys_addr; - * }; - * - * get_vm_area() would then call vmregion_alloc with an appropriate - * struct vmregion head (eg): - * - * struct vmregion vmalloc_head = { - * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), - * .vm_start = VMALLOC_START, - * .vm_end = VMALLOC_END, - * }; - * - * However, vmalloc_head.vm_start is variable (typically, it is dependent on - * the amount of RAM found at boot time.) I would imagine that get_vm_area() - * would have to initialise this each time prior to calling vmregion_alloc(). - */ - -struct arm_vmregion * -arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align, - size_t size, gfp_t gfp, const void *caller) -{ - unsigned long start = head->vm_start, addr = head->vm_end; - unsigned long flags; - struct arm_vmregion *c, *new; - - if (head->vm_end - head->vm_start < size) { - printk(KERN_WARNING "%s: allocation too big (requested %#x)\n", - __func__, size); - goto out; - } - - new = kmalloc(sizeof(struct arm_vmregion), gfp); - if (!new) - goto out; - - new->caller = caller; - - spin_lock_irqsave(&head->vm_lock, flags); - - addr = rounddown(addr - size, align); - list_for_each_entry_reverse(c, &head->vm_list, vm_list) { - if (addr >= c->vm_end) - goto found; - addr = rounddown(c->vm_start - size, align); - if (addr < start) - goto nospc; - } - - found: - /* - * Insert this entry after the one we found. - */ - list_add(&new->vm_list, &c->vm_list); - new->vm_start = addr; - new->vm_end = addr + size; - new->vm_active = 1; - - spin_unlock_irqrestore(&head->vm_lock, flags); - return new; - - nospc: - spin_unlock_irqrestore(&head->vm_lock, flags); - kfree(new); - out: - return NULL; -} - -static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr) -{ - struct arm_vmregion *c; - - list_for_each_entry(c, &head->vm_list, vm_list) { - if (c->vm_active && c->vm_start == addr) - goto out; - } - c = NULL; - out: - return c; -} - -struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr) -{ - struct arm_vmregion *c; - unsigned long flags; - - spin_lock_irqsave(&head->vm_lock, flags); - c = __arm_vmregion_find(head, addr); - spin_unlock_irqrestore(&head->vm_lock, flags); - return c; -} - -struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr) -{ - struct arm_vmregion *c; - unsigned long flags; - - spin_lock_irqsave(&head->vm_lock, flags); - c = __arm_vmregion_find(head, addr); - if (c) - c->vm_active = 0; - spin_unlock_irqrestore(&head->vm_lock, flags); - return c; -} - -void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c) -{ - unsigned long flags; - - spin_lock_irqsave(&head->vm_lock, flags); - list_del(&c->vm_list); - spin_unlock_irqrestore(&head->vm_lock, flags); - - kfree(c); -} - -#ifdef CONFIG_PROC_FS -static int arm_vmregion_show(struct seq_file *m, void *p) -{ - struct arm_vmregion *c = list_entry(p, struct arm_vmregion, vm_list); - - seq_printf(m, "0x%08lx-0x%08lx %7lu", c->vm_start, c->vm_end, - c->vm_end - c->vm_start); - if (c->caller) - seq_printf(m, " %pS", (void *)c->caller); - seq_putc(m, '\n'); - return 0; -} - -static void *arm_vmregion_start(struct seq_file *m, loff_t *pos) -{ - struct arm_vmregion_head *h = m->private; - spin_lock_irq(&h->vm_lock); - return seq_list_start(&h->vm_list, *pos); -} - -static void *arm_vmregion_next(struct seq_file *m, void *p, loff_t *pos) -{ - struct arm_vmregion_head *h = m->private; - return seq_list_next(p, &h->vm_list, pos); -} - -static void arm_vmregion_stop(struct seq_file *m, void *p) -{ - struct arm_vmregion_head *h = m->private; - spin_unlock_irq(&h->vm_lock); -} - -static const struct seq_operations arm_vmregion_ops = { - .start = arm_vmregion_start, - .stop = arm_vmregion_stop, - .next = arm_vmregion_next, - .show = arm_vmregion_show, -}; - -static int arm_vmregion_open(struct inode *inode, struct file *file) -{ - struct arm_vmregion_head *h = PDE(inode)->data; - int ret = seq_open(file, &arm_vmregion_ops); - if (!ret) { - struct seq_file *m = file->private_data; - m->private = h; - } - return ret; -} - -static const struct file_operations arm_vmregion_fops = { - .open = arm_vmregion_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h) -{ - proc_create_data(path, S_IRUSR, NULL, &arm_vmregion_fops, h); - return 0; -} -#else -int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h) -{ - return 0; -} -#endif diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h deleted file mode 100644 index 0f5a5f2..0000000 --- a/arch/arm/mm/vmregion.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef VMREGION_H -#define VMREGION_H - -#include <linux/spinlock.h> -#include <linux/list.h> - -struct page; - -struct arm_vmregion_head { - spinlock_t vm_lock; - struct list_head vm_list; - unsigned long vm_start; - unsigned long vm_end; -}; - -struct arm_vmregion { - struct list_head vm_list; - unsigned long vm_start; - unsigned long vm_end; - int vm_active; - const void *caller; -}; - -struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t, const void *); -struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long); -struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long); -void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *); - -int arm_vmregion_create_proc(const char *, struct arm_vmregion_head *); - -#endif diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index a34f1e2..6828ef6 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -341,10 +341,17 @@ static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx) static inline void emit_swap16(u8 r_dst, u8 r_src, struct jit_ctx *ctx) { - emit(ARM_LSL_R(ARM_R1, r_src, 8), ctx); - emit(ARM_ORR_S(r_dst, ARM_R1, r_src, SRTYPE_LSL, 8), ctx); - emit(ARM_LSL_I(r_dst, r_dst, 8), ctx); - emit(ARM_LSL_R(r_dst, r_dst, 8), ctx); + /* r_dst = (r_src << 8) | (r_src >> 8) */ + emit(ARM_LSL_I(ARM_R1, r_src, 8), ctx); + emit(ARM_ORR_S(r_dst, ARM_R1, r_src, SRTYPE_LSR, 8), ctx); + + /* + * we need to mask out the bits set in r_dst[23:16] due to + * the first shift instruction. + * + * note that 0x8ff is the encoded immediate 0x00ff0000. + */ + emit(ARM_BIC_I(r_dst, r_dst, 0x8ff), ctx); } #else /* ARMv6+ */ diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index cbfbbe4..837a2d5 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -156,14 +156,9 @@ void __init iop_init_time(unsigned long tick_rate) write_tmr0(timer_ctl & ~IOP_TMR_EN); write_tisr(1); setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq); - clockevents_calc_mult_shift(&iop_clockevent, - tick_rate, IOP_MIN_RANGE); - iop_clockevent.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &iop_clockevent); - iop_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &iop_clockevent); iop_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&iop_clockevent); + clockevents_config_and_register(&iop_clockevent, tick_rate, + 0xf, 0xfffffffe); /* * Set up free-running clocksource timer 1. diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 665870d..67c859c 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -5,36 +5,6 @@ menu "TI OMAP Common Features" config ARCH_OMAP_OTG bool -choice - prompt "OMAP System Type" - default ARCH_OMAP2PLUS - -config ARCH_OMAP1 - bool "TI OMAP1" - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select GENERIC_IRQ_CHIP - select HAVE_IDE - select IRQ_DOMAIN - select NEED_MACH_IO_H if PCCARD - select NEED_MACH_MEMORY_H - help - "Systems based on omap7xx, omap15xx or omap16xx" - -config ARCH_OMAP2PLUS - bool "TI OMAP2/3/4" - select CLKDEV_LOOKUP - select GENERIC_IRQ_CHIP - select OMAP_DM_TIMER - select PINCTRL - select PROC_DEVICETREE if PROC_FS - select SPARSE_IRQ - select USE_OF - help - "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5" - -endchoice - comment "OMAP Feature Selections" config OMAP_DEBUG_DEVICES @@ -118,7 +88,7 @@ config OMAP_MUX_WARNINGS config OMAP_MBOX_FWK tristate "Mailbox framework support" - depends on ARCH_OMAP + depends on ARCH_OMAP && !ARCH_MULTIPLATFORM help Say Y here if you want to use OMAP Mailbox framework support for DSP, IVA1.0 and IVA2 in OMAP1/2/3. diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index a14a78a..3119941 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -2,6 +2,8 @@ # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include + # Common support obj-y := sram.o dma.o counter_32k.o obj-m := diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 4136b20..e06c34b 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2019,7 +2019,7 @@ static int omap_system_dma_probe(struct platform_device *pdev) errata = p->errata; if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels - && (omap_dma_reserve_channels <= dma_lch_count)) + && (omap_dma_reserve_channels < d->lch_count)) d->lch_count = omap_dma_reserve_channels; dma_lch_count = d->lch_count; diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 7b433f3..a0daa2f 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -808,11 +808,9 @@ static int omap_dm_timer_probe(struct platform_device *pdev) return -ENOMEM; } - timer->io_base = devm_request_and_ioremap(dev, mem); - if (!timer->io_base) { - dev_err(dev, "%s: region already claimed.\n", __func__); - return -ENOMEM; - } + timer->io_base = devm_ioremap_resource(dev, mem); + if (IS_ERR(timer->io_base)) + return PTR_ERR(timer->io_base); if (dev->of_node) { if (of_find_property(dev->of_node, "ti,timer-alwon", NULL)) diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index f9df624..58213d9 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -68,7 +68,7 @@ __setup("i2c_bus=", omap_i2c_bus_setup); * Register busses defined in command line but that are not registered with * omap_register_i2c_bus from board initialization code. */ -static int __init omap_register_i2c_bus_cmdline(void) +int __init omap_register_i2c_bus_cmdline(void) { int i, err = 0; @@ -83,7 +83,6 @@ static int __init omap_register_i2c_bus_cmdline(void) out: return err; } -subsys_initcall(omap_register_i2c_bus_cmdline); /** * omap_register_i2c_bus - register I2C bus with device descriptors diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 7a9028c..810629d 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -32,6 +32,7 @@ int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len); +extern int omap_register_i2c_bus_cmdline(void); #else static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, @@ -39,6 +40,11 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, { return 0; } + +static inline int omap_register_i2c_bus_cmdline(void) +{ + return 0; +} #endif struct omap_hwmod; diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c index e686fe7..7310bcf 100644 --- a/arch/arm/plat-orion/mpp.c +++ b/arch/arm/plat-orion/mpp.c @@ -49,7 +49,7 @@ void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask, "number (%u)\n", num); continue; } - if (variant_mask & !(*mpp_list & variant_mask)) { + if (variant_mask && !(*mpp_list & variant_mask)) { printk(KERN_WARNING "orion_mpp_conf: requested MPP%u config " "unavailable on this hardware\n", num); diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 0f4fa86..5d5ac0f 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -156,7 +156,6 @@ orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) static struct clock_event_device orion_clkevt = { .name = "orion_tick", .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, - .shift = 32, .rating = 300, .set_next_event = orion_clkevt_next_event, .set_mode = orion_clkevt_mode, @@ -221,9 +220,6 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask, * Setup clockevent timer (interrupt-driven). */ setup_irq(irq, &orion_timer_irq); - orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift); - orion_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe, &orion_clkevt); - orion_clkevt.min_delta_ns = clockevent_delta2ns(1, &orion_clkevt); orion_clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&orion_clkevt); + clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe); } diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig deleted file mode 100644 index eef3b6a..0000000 --- a/arch/arm/plat-s3c24xx/Kconfig +++ /dev/null @@ -1,116 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -config PLAT_S3C24XX - bool - depends on ARCH_S3C24XX - default y - select ARCH_REQUIRE_GPIOLIB - select NO_IOPORT - select S3C_DEV_NAND - help - Base platform code for any Samsung S3C24XX device - -if PLAT_S3C24XX - -# low-level serial option nodes - -config CPU_LLSERIAL_S3C2410_ONLY - bool - default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 - -config CPU_LLSERIAL_S3C2440_ONLY - bool - default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 - -config CPU_LLSERIAL_S3C2410 - bool - help - Selected if there is an S3C2410 (or register compatible) serial - low-level implementation needed - -config CPU_LLSERIAL_S3C2440 - bool - help - Selected if there is an S3C2440 (or register compatible) serial - low-level implementation needed - -# code that is shared between a number of the s3c24xx implementations - -config S3C2410_CLOCK - bool - help - Clock code for the S3C2410, and similar processors which - is currently includes the S3C2410, S3C2440, S3C2442. - -config S3C24XX_DCLK - bool - help - Clock code for supporting DCLK/CLKOUT on S3C24XX architectures - -# gpio configurations - -config S3C24XX_GPIO_EXTRA - int - default 128 if S3C24XX_GPIO_EXTRA128 - default 64 if S3C24XX_GPIO_EXTRA64 - default 16 if ARCH_H1940 - default 0 - -config S3C24XX_GPIO_EXTRA64 - bool - help - Add an extra 64 gpio numbers to the available GPIO pool. This is - available for boards that need extra gpios for external devices. - -config S3C24XX_GPIO_EXTRA128 - bool - help - Add an extra 128 gpio numbers to the available GPIO pool. This is - available for boards that need extra gpios for external devices. - -config S3C24XX_DMA - bool "S3C2410 DMA support" - depends on ARCH_S3C24XX - select S3C_DMA - help - S3C2410 DMA support. This is needed for drivers like sound which - use the S3C2410's DMA system to move data to and from the - peripheral blocks. - -config S3C2410_DMA_DEBUG - bool "S3C2410 DMA support debug" - depends on ARCH_S3C24XX && S3C2410_DMA - help - Enable debugging output for the DMA code. This option sends info - to the kernel log, at priority KERN_DEBUG. - -# common code for s3c24xx based machines, such as the SMDKs. - -# cpu frequency items common between s3c2410 and s3c2440/s3c2442 - -config S3C2410_IOTIMING - bool - depends on CPU_FREQ_S3C24XX - help - Internal node to select io timing code that is common to the s3c2410 - and s3c2440/s3c2442 cpu frequency support. - -config S3C2410_CPUFREQ_UTILS - bool - depends on CPU_FREQ_S3C24XX - help - Internal node to select timing code that is common to the s3c2410 - and s3c2440/s3c244 cpu frequency support. - -# cpu frequency support common to s3c2412, s3c2413 and s3c2442 - -config S3C2412_IOTIMING - bool - depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443) - help - Intel node to select io timing code that is common to the s3c2412 - and the s3c2443. - -endif diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile deleted file mode 100644 index 9f60549c..0000000 --- a/arch/arm/plat-s3c24xx/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# arch/arm/plat-s3c24xx/Makefile -# -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - - -# Core files - -obj-y += irq.o -obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o - -obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o -obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o - -# Architecture dependent builds - -obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o -obj-$(CONFIG_S3C24XX_DMA) += dma.o -obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o -obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o -obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c deleted file mode 100644 index fe57bbb..0000000 --- a/arch/arm/plat-s3c24xx/irq.c +++ /dev/null @@ -1,676 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/syscore_ops.h> - -#include <asm/irq.h> -#include <asm/mach/irq.h> - -#include <plat/regs-irqtype.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -static void -s3c_irq_mask(struct irq_data *data) -{ - unsigned int irqno = data->irq - IRQ_EINT0; - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - mask |= 1UL << irqno; - __raw_writel(mask, S3C2410_INTMSK); -} - -static inline void -s3c_irq_ack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static inline void -s3c_irq_maskack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); - - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - - -static void -s3c_irq_unmask(struct irq_data *data) -{ - unsigned int irqno = data->irq; - unsigned long mask; - - if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23) - irqdbf2("s3c_irq_unmask %d\n", irqno); - - irqno -= IRQ_EINT0; - - mask = __raw_readl(S3C2410_INTMSK); - mask &= ~(1UL << irqno); - __raw_writel(mask, S3C2410_INTMSK); -} - -struct irq_chip s3c_irq_level_chip = { - .name = "s3c-level", - .irq_ack = s3c_irq_maskack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake -}; - -struct irq_chip s3c_irq_chip = { - .name = "s3c", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake -}; - -static void -s3c_irqext_mask(struct irq_data *data) -{ - unsigned int irqno = data->irq - EXTINT_OFF; - unsigned long mask; - - mask = __raw_readl(S3C24XX_EINTMASK); - mask |= ( 1UL << irqno); - __raw_writel(mask, S3C24XX_EINTMASK); -} - -static void -s3c_irqext_ack(struct irq_data *data) -{ - unsigned long req; - unsigned long bit; - unsigned long mask; - - bit = 1UL << (data->irq - EXTINT_OFF); - - mask = __raw_readl(S3C24XX_EINTMASK); - - __raw_writel(bit, S3C24XX_EINTPEND); - - req = __raw_readl(S3C24XX_EINTPEND); - req &= ~mask; - - /* not sure if we should be acking the parent irq... */ - - if (data->irq <= IRQ_EINT7) { - if ((req & 0xf0) == 0) - s3c_irq_ack(irq_get_irq_data(IRQ_EINT4t7)); - } else { - if ((req >> 8) == 0) - s3c_irq_ack(irq_get_irq_data(IRQ_EINT8t23)); - } -} - -static void -s3c_irqext_unmask(struct irq_data *data) -{ - unsigned int irqno = data->irq - EXTINT_OFF; - unsigned long mask; - - mask = __raw_readl(S3C24XX_EINTMASK); - mask &= ~(1UL << irqno); - __raw_writel(mask, S3C24XX_EINTMASK); -} - -int -s3c_irqext_type(struct irq_data *data, unsigned int type) -{ - void __iomem *extint_reg; - void __iomem *gpcon_reg; - unsigned long gpcon_offset, extint_offset; - unsigned long newvalue = 0, value; - - if ((data->irq >= IRQ_EINT0) && (data->irq <= IRQ_EINT3)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->irq - IRQ_EINT0) * 2; - extint_offset = (data->irq - IRQ_EINT0) * 4; - } else if ((data->irq >= IRQ_EINT4) && (data->irq <= IRQ_EINT7)) { - gpcon_reg = S3C2410_GPFCON; - extint_reg = S3C24XX_EXTINT0; - gpcon_offset = (data->irq - (EXTINT_OFF)) * 2; - extint_offset = (data->irq - (EXTINT_OFF)) * 4; - } else if ((data->irq >= IRQ_EINT8) && (data->irq <= IRQ_EINT15)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT1; - gpcon_offset = (data->irq - IRQ_EINT8) * 2; - extint_offset = (data->irq - IRQ_EINT8) * 4; - } else if ((data->irq >= IRQ_EINT16) && (data->irq <= IRQ_EINT23)) { - gpcon_reg = S3C2410_GPGCON; - extint_reg = S3C24XX_EXTINT2; - gpcon_offset = (data->irq - IRQ_EINT8) * 2; - extint_offset = (data->irq - IRQ_EINT16) * 4; - } else { - return -1; - } - - /* Set the GPIO to external interrupt mode */ - value = __raw_readl(gpcon_reg); - value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); - __raw_writel(value, gpcon_reg); - - /* Set the external interrupt to pointed trigger type */ - switch (type) - { - case IRQ_TYPE_NONE: - printk(KERN_WARNING "No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -1; - } - - value = __raw_readl(extint_reg); - value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); - __raw_writel(value, extint_reg); - - return 0; -} - -static struct irq_chip s3c_irqext_chip = { - .name = "s3c-ext", - .irq_mask = s3c_irqext_mask, - .irq_unmask = s3c_irqext_unmask, - .irq_ack = s3c_irqext_ack, - .irq_set_type = s3c_irqext_type, - .irq_set_wake = s3c_irqext_wake -}; - -static struct irq_chip s3c_irq_eint0t4 = { - .name = "s3c-ext0", - .irq_ack = s3c_irq_ack, - .irq_mask = s3c_irq_mask, - .irq_unmask = s3c_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext_type, -}; - -/* mask values for the parent registers for each of the interrupt types */ - -#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0)) -#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0)) -#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0)) -#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0)) - - -/* UART0 */ - -static void -s3c_irq_uart0_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_UART0, 7); -} - -static void -s3c_irq_uart0_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_UART0); -} - -static void -s3c_irq_uart0_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_UART0, 7); -} - -static struct irq_chip s3c_irq_uart0 = { - .name = "s3c-uart0", - .irq_mask = s3c_irq_uart0_mask, - .irq_unmask = s3c_irq_uart0_unmask, - .irq_ack = s3c_irq_uart0_ack, -}; - -/* UART1 */ - -static void -s3c_irq_uart1_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_UART1, 7 << 3); -} - -static void -s3c_irq_uart1_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_UART1); -} - -static void -s3c_irq_uart1_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_UART1, 7 << 3); -} - -static struct irq_chip s3c_irq_uart1 = { - .name = "s3c-uart1", - .irq_mask = s3c_irq_uart1_mask, - .irq_unmask = s3c_irq_uart1_unmask, - .irq_ack = s3c_irq_uart1_ack, -}; - -/* UART2 */ - -static void -s3c_irq_uart2_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_UART2, 7 << 6); -} - -static void -s3c_irq_uart2_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_UART2); -} - -static void -s3c_irq_uart2_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_UART2, 7 << 6); -} - -static struct irq_chip s3c_irq_uart2 = { - .name = "s3c-uart2", - .irq_mask = s3c_irq_uart2_mask, - .irq_unmask = s3c_irq_uart2_unmask, - .irq_ack = s3c_irq_uart2_ack, -}; - -/* ADC and Touchscreen */ - -static void -s3c_irq_adc_mask(struct irq_data *d) -{ - s3c_irqsub_mask(d->irq, INTMSK_ADCPARENT, 3 << 9); -} - -static void -s3c_irq_adc_unmask(struct irq_data *d) -{ - s3c_irqsub_unmask(d->irq, INTMSK_ADCPARENT); -} - -static void -s3c_irq_adc_ack(struct irq_data *d) -{ - s3c_irqsub_ack(d->irq, INTMSK_ADCPARENT, 3 << 9); -} - -static struct irq_chip s3c_irq_adc = { - .name = "s3c-adc", - .irq_mask = s3c_irq_adc_mask, - .irq_unmask = s3c_irq_adc_unmask, - .irq_ack = s3c_irq_adc_ack, -}; - -/* irq demux for adc */ -static void s3c_irq_demux_adc(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - unsigned int offset = 9; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= offset; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_TC); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_ADC); - } - } -} - -static void s3c_irq_demux_uart(unsigned int start) -{ - unsigned int subsrc, submsk; - unsigned int offset = start - IRQ_S3CUART_RX0; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n", - start, offset, subsrc, submsk); - - subsrc &= ~submsk; - subsrc >>= offset; - subsrc &= 7; - - if (subsrc != 0) { - if (subsrc & 1) - generic_handle_irq(start); - - if (subsrc & 2) - generic_handle_irq(start+1); - - if (subsrc & 4) - generic_handle_irq(start+2); - } -} - -/* uart demux entry points */ - -static void -s3c_irq_demux_uart0(unsigned int irq, - struct irq_desc *desc) -{ - irq = irq; - s3c_irq_demux_uart(IRQ_S3CUART_RX0); -} - -static void -s3c_irq_demux_uart1(unsigned int irq, - struct irq_desc *desc) -{ - irq = irq; - s3c_irq_demux_uart(IRQ_S3CUART_RX1); -} - -static void -s3c_irq_demux_uart2(unsigned int irq, - struct irq_desc *desc) -{ - irq = irq; - s3c_irq_demux_uart(IRQ_S3CUART_RX2); -} - -static void -s3c_irq_demux_extint8(unsigned int irq, - struct irq_desc *desc) -{ - unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); - unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); - - eintpnd &= ~eintmsk; - eintpnd &= ~0xff; /* ignore lower irqs */ - - /* we may as well handle all the pending IRQs here */ - - while (eintpnd) { - irq = __ffs(eintpnd); - eintpnd &= ~(1<<irq); - - irq += (IRQ_EINT4 - 4); - generic_handle_irq(irq); - } - -} - -static void -s3c_irq_demux_extint4t7(unsigned int irq, - struct irq_desc *desc) -{ - unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND); - unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK); - - eintpnd &= ~eintmsk; - eintpnd &= 0xff; /* only lower irqs */ - - /* we may as well handle all the pending IRQs here */ - - while (eintpnd) { - irq = __ffs(eintpnd); - eintpnd &= ~(1<<irq); - - irq += (IRQ_EINT4 - 4); - - generic_handle_irq(irq); - } -} - -#ifdef CONFIG_FIQ -/** - * s3c24xx_set_fiq - set the FIQ routing - * @irq: IRQ number to route to FIQ on processor. - * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. - * - * Change the state of the IRQ to FIQ routing depending on @irq and @on. If - * @on is true, the @irq is checked to see if it can be routed and the - * interrupt controller updated to route the IRQ. If @on is false, the FIQ - * routing is cleared, regardless of which @irq is specified. - */ -int s3c24xx_set_fiq(unsigned int irq, bool on) -{ - u32 intmod; - unsigned offs; - - if (on) { - offs = irq - FIQ_START; - if (offs > 31) - return -EINVAL; - - intmod = 1 << offs; - } else { - intmod = 0; - } - - __raw_writel(intmod, S3C2410_INTMOD); - return 0; -} - -EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); -#endif - - -/* s3c24xx_init_irq - * - * Initialise S3C2410 IRQ system -*/ - -void __init s3c24xx_init_irq(void) -{ - unsigned long pend; - unsigned long last; - int irqno; - int i; - -#ifdef CONFIG_FIQ - init_FIQ(FIQ_START); -#endif - - irqdbf("s3c2410_init_irq: clearing interrupt status flags\n"); - - /* first, clear all interrupts pending... */ - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C24XX_EINTPEND); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, S3C24XX_EINTPEND); - printk("irq: clearing pending ext status %08x\n", (int)pend); - last = pend; - } - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2410_INTPND); - - if (pend == 0 || pend == last) - break; - - __raw_writel(pend, S3C2410_SRCPND); - __raw_writel(pend, S3C2410_INTPND); - printk("irq: clearing pending status %08x\n", (int)pend); - last = pend; - } - - last = 0; - for (i = 0; i < 4; i++) { - pend = __raw_readl(S3C2410_SUBSRCPND); - - if (pend == 0 || pend == last) - break; - - printk("irq: clearing subpending status %08x\n", (int)pend); - __raw_writel(pend, S3C2410_SUBSRCPND); - last = pend; - } - - /* register the main interrupts */ - - irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n"); - - for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) { - /* set all the s3c2410 internal irqs */ - - switch (irqno) { - /* deal with the special IRQs (cascaded) */ - - case IRQ_EINT4t7: - case IRQ_EINT8t23: - case IRQ_UART0: - case IRQ_UART1: - case IRQ_UART2: - case IRQ_ADCPARENT: - irq_set_chip_and_handler(irqno, &s3c_irq_level_chip, - handle_level_irq); - break; - - case IRQ_RESERVED6: - case IRQ_RESERVED24: - /* no IRQ here */ - break; - - default: - //irqdbf("registering irq %d (s3c irq)\n", irqno); - irq_set_chip_and_handler(irqno, &s3c_irq_chip, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - } - - /* setup the cascade irq handlers */ - - irq_set_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7); - irq_set_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8); - - irq_set_chained_handler(IRQ_UART0, s3c_irq_demux_uart0); - irq_set_chained_handler(IRQ_UART1, s3c_irq_demux_uart1); - irq_set_chained_handler(IRQ_UART2, s3c_irq_demux_uart2); - irq_set_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc); - - /* external interrupts */ - - for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - irqdbf("registering irq %d (ext int)\n", irqno); - irq_set_chip_and_handler(irqno, &s3c_irq_eint0t4, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) { - irqdbf("registering irq %d (extended s3c irq)\n", irqno); - irq_set_chip_and_handler(irqno, &s3c_irqext_chip, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* register the uart interrupts */ - - irqdbf("s3c2410: registering external interrupts\n"); - - for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) { - irqdbf("registering irq %d (s3c uart0 irq)\n", irqno); - irq_set_chip_and_handler(irqno, &s3c_irq_uart0, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) { - irqdbf("registering irq %d (s3c uart1 irq)\n", irqno); - irq_set_chip_and_handler(irqno, &s3c_irq_uart1, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) { - irqdbf("registering irq %d (s3c uart2 irq)\n", irqno); - irq_set_chip_and_handler(irqno, &s3c_irq_uart2, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) { - irqdbf("registering irq %d (s3c adc irq)\n", irqno); - irq_set_chip_and_handler(irqno, &s3c_irq_adc, handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - irqdbf("s3c2410: registered interrupt handlers\n"); -} - -struct syscore_ops s3c24xx_irq_syscore_ops = { - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 2d676ab..ca07cb1 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -386,11 +386,9 @@ static int s3c_adc_probe(struct platform_device *pdev) return -ENXIO; } - adc->regs = devm_request_and_ioremap(dev, regs); - if (!adc->regs) { - dev_err(dev, "failed to map registers\n"); - return -ENXIO; - } + adc->regs = devm_ioremap_resource(dev, regs); + if (IS_ERR(adc->regs)) + return PTR_ERR(adc->regs); ret = regulator_enable(adc->vdd); if (ret) diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index d088afa..71d58dd 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -19,7 +19,8 @@ #include <mach/dma.h> static unsigned samsung_dmadev_request(enum dma_ch dma_ch, - struct samsung_dma_req *param) + struct samsung_dma_req *param, + struct device *dev, char *ch_name) { dma_cap_mask_t mask; void *filter_param; @@ -33,7 +34,12 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch, */ filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)param->dt_dmach_prop : (void *)dma_ch; - return (unsigned)dma_request_channel(mask, pl330_filter, filter_param); + + if (dev->of_node) + return (unsigned)dma_request_slave_channel(dev, ch_name); + else + return (unsigned)dma_request_channel(mask, pl330_filter, + filter_param); } static int samsung_dmadev_release(unsigned ch, void *param) diff --git a/arch/arm/plat-samsung/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h index b258a08..2fc8931 100644 --- a/arch/arm/plat-samsung/include/plat/adc.h +++ b/arch/arm/plat-samsung/include/plat/adc.h @@ -15,6 +15,7 @@ #define __ASM_PLAT_ADC_H __FILE__ struct s3c_adc_client; +struct platform_device; extern int s3c_adc_start(struct s3c_adc_client *client, unsigned int channel, unsigned int nr_samples); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index b69e11d..37703ef 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -194,8 +194,7 @@ extern void s3c24xx_init_uartdevs(char *name, /* timer for 2410/2440 */ -struct sys_timer; -extern struct sys_timer s3c24xx_timer; +extern void s3c24xx_timer_init(void); extern struct syscore_ops s3c2410_pm_syscore_ops; extern struct syscore_ops s3c2412_pm_syscore_ops; diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S index 207e275..f3a9cff 100644 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ b/arch/arm/plat-samsung/include/plat/debug-macro.S @@ -14,12 +14,12 @@ /* The S5PV210/S5PC110 implementations are as belows. */ .macro fifo_level_s5pv210 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] and \rd, \rd, #S5PV210_UFSTAT_TXMASK .endm .macro fifo_full_s5pv210 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] tst \rd, #S5PV210_UFSTAT_TXFULL .endm @@ -27,7 +27,7 @@ * most widely re-used */ .macro fifo_level_s3c2440 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] and \rd, \rd, #S3C2440_UFSTAT_TXMASK .endm @@ -36,7 +36,7 @@ #endif .macro fifo_full_s3c2440 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] tst \rd, #S3C2440_UFSTAT_TXFULL .endm @@ -45,11 +45,11 @@ #endif .macro senduart,rd,rx - strb \rd, [\rx, # S3C2410_UTXH ] + strb \rd, [\rx, # S3C2410_UTXH] .endm .macro busyuart, rd, rx - ldr \rd, [ \rx, # S3C2410_UFCON ] + ldr \rd, [\rx, # S3C2410_UFCON] tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? beq 1001f @ @ FIFO enabled... @@ -60,7 +60,7 @@ 1001: @ busy waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + ldr \rd, [\rx, # S3C2410_UTRSTAT] tst \rd, #S3C2410_UTRSTAT_TXFE beq 1001b @@ -68,7 +68,7 @@ .endm .macro waituart,rd,rx - ldr \rd, [ \rx, # S3C2410_UFCON ] + ldr \rd, [\rx, # S3C2410_UFCON] tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? beq 1001f @ @ FIFO enabled... @@ -79,7 +79,7 @@ b 1002f 1001: @ idle waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + ldr \rd, [\rx, # S3C2410_UTRSTAT] tst \rd, #S3C2410_UTRSTAT_TXFE beq 1001b diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index f5144cd..1141782 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -39,7 +39,8 @@ struct samsung_dma_config { }; struct samsung_dma_ops { - unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param); + unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param, + struct device *dev, char *ch_name); int (*release)(unsigned ch, void *param); int (*config)(unsigned ch, struct samsung_dma_config *param); int (*prepare)(unsigned ch, struct samsung_dma_prep *param); diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h index 945a99d..1d6cb2b 100644 --- a/arch/arm/plat-samsung/include/plat/fimc-core.h +++ b/arch/arm/plat-samsung/include/plat/fimc-core.h @@ -43,6 +43,8 @@ static inline void s3c_fimc_setname(int id, char *name) s5p_device_fimc3.name = name; break; #endif + default: + break; } } diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index f7a3ea2..cf5aae5 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -106,7 +106,18 @@ static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chi #else /* machine specific code should provide samsung_gpiolib_getchip */ -#include <mach/gpio-track.h> +extern struct samsung_gpio_chip s3c24xx_gpios[]; + +static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin) +{ + struct samsung_gpio_chip *chip; + + if (pin > S3C_GPIO_END) + return NULL; + + chip = &s3c24xx_gpios[pin/32]; + return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL; +} static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { } #endif diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h deleted file mode 100644 index d1ecef0..0000000 --- a/arch/arm/plat-samsung/include/plat/gpio-fns.h +++ /dev/null @@ -1 +0,0 @@ -#include <plat/gpio-cfg.h> diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 887a0c9..f6fcade 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -109,17 +109,11 @@ extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count); #ifdef CONFIG_PM extern int s3c_irq_wake(struct irq_data *data, unsigned int state); extern int s3c_irqext_wake(struct irq_data *data, unsigned int state); -extern int s3c24xx_irq_suspend(void); -extern void s3c24xx_irq_resume(void); #else #define s3c_irq_wake NULL #define s3c_irqext_wake NULL -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL #endif -extern struct syscore_ops s3c24xx_irq_syscore_ops; - /* PM debug functions */ #ifdef CONFIG_SAMSUNG_PM_DEBUG diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h index 7178e33..f27399a 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2416.h +++ b/arch/arm/plat-samsung/include/plat/s3c2416.h @@ -25,6 +25,7 @@ extern int s3c2416_baseclk_add(void); extern void s3c2416_restart(char mode, const char *cmd); +extern void s3c2416_init_irq(void); extern struct syscore_ops s3c2416_irq_syscore_ops; #else diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h index a5b794f..71b88ec 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2443.h +++ b/arch/arm/plat-samsung/include/plat/s3c2443.h @@ -25,6 +25,8 @@ extern void s3c2443_init_clocks(int xtal); extern int s3c2443_baseclk_add(void); extern void s3c2443_restart(char mode, const char *cmd); + +extern void s3c2443_init_irq(void); #else #define s3c2443_init_clocks NULL #define s3c2443_init_uarts NULL diff --git a/arch/arm/plat-samsung/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h index 3a70aeb..9c96f35 100644 --- a/arch/arm/plat-samsung/include/plat/s5p-time.h +++ b/arch/arm/plat-samsung/include/plat/s5p-time.h @@ -36,5 +36,5 @@ struct s5p_timer_source { extern void __init s5p_set_timer_source(enum s5p_timer_mode event, enum s5p_timer_mode source); -extern struct sys_timer s5p_timer; +extern void s5p_timer_init(void); #endif /* __ASM_PLAT_S5P_TIME_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 151cc91..9b87f38 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -374,6 +374,8 @@ static inline void s3c_sdhci_setname(int id, char *name) s3c_device_hsmmc3.name = name; break; #endif + default: + break; } } diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index 7e068d1..438b248 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -97,33 +97,6 @@ static inline void flush(void) *((volatile unsigned int __force *)(ad)) = (d); \ } while (0) -/* CONFIG_S3C_BOOT_WATCHDOG - * - * Simple boot-time watchdog setup, to reboot the system if there is - * any problem with the boot process -*/ - -#ifdef CONFIG_S3C_BOOT_WATCHDOG - -#define WDOG_COUNT (0xff00) - -static inline void arch_decomp_wdog(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); -} - -static void arch_decomp_wdog_start(void) -{ - __raw_writel(WDOG_COUNT, S3C2410_WTDAT); - __raw_writel(WDOG_COUNT, S3C2410_WTCNT); - __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON); -} - -#else -#define arch_decomp_wdog_start() -#define arch_decomp_wdog() -#endif - #ifdef CONFIG_S3C_BOOT_ERROR_RESET static void arch_decomp_error(const char *x) @@ -173,7 +146,6 @@ arch_decomp_setup(void) */ arch_detect_cpu(); - arch_decomp_wdog_start(); /* Enable the UART FIFOs if they where not enabled and our * configuration says we should turn them on. diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 1507028..002b147 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -51,7 +51,7 @@ void s3c_pm_dbg(const char *fmt, ...) char buff[256]; va_start(va, fmt); - vsprintf(buff, fmt, va); + vsnprintf(buff, sizeof(buff), fmt, va); va_end(va); printascii(buff); @@ -243,6 +243,7 @@ int (*pm_cpu_sleep)(unsigned long); static int s3c_pm_enter(suspend_state_t state) { + int ret; /* ensure the debug is initialised (if enabled) */ s3c_pm_debug_init(); @@ -300,7 +301,9 @@ static int s3c_pm_enter(suspend_state_t state) * we resume as it saves its own register state and restores it * during the resume. */ - cpu_suspend(0, pm_cpu_sleep); + ret = cpu_suspend(0, pm_cpu_sleep); + if (ret) + return ret; /* restore the system state */ diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c index f99448c..0cc40ae 100644 --- a/arch/arm/plat-samsung/s3c-dma-ops.c +++ b/arch/arm/plat-samsung/s3c-dma-ops.c @@ -36,7 +36,8 @@ static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param, } static unsigned s3c_dma_request(enum dma_ch dma_ch, - struct samsung_dma_req *param) + struct samsung_dma_req *param, + struct device *dev, char *ch_name) { struct cb_data *data; diff --git a/arch/arm/plat-samsung/s5p-irq-eint.c b/arch/arm/plat-samsung/s5p-irq-eint.c index 33bd3f3..faa6516 100644 --- a/arch/arm/plat-samsung/s5p-irq-eint.c +++ b/arch/arm/plat-samsung/s5p-irq-eint.c @@ -15,8 +15,7 @@ #include <linux/io.h> #include <linux/device.h> #include <linux/gpio.h> - -#include <asm/hardware/vic.h> +#include <linux/irqchip/arm-vic.h> #include <plat/regs-irqtype.h> diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c index dfb47d6..103e371 100644 --- a/arch/arm/plat-samsung/s5p-irq.c +++ b/arch/arm/plat-samsung/s5p-irq.c @@ -13,8 +13,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> - -#include <asm/hardware/vic.h> +#include <linux/irqchip/arm-vic.h> #include <mach/map.h> #include <plat/regs-timer.h> diff --git a/arch/arm/plat-samsung/s5p-time.c b/arch/arm/plat-samsung/s5p-time.c index 028b6e8..e92510c 100644 --- a/arch/arm/plat-samsung/s5p-time.c +++ b/arch/arm/plat-samsung/s5p-time.c @@ -274,15 +274,8 @@ static void __init s5p_clockevent_init(void) clock_rate = clk_get_rate(tin_event); clock_count_per_tick = clock_rate / HZ; - clockevents_calc_mult_shift(&time_event_device, - clock_rate, S5PTIMER_MIN_RANGE); - time_event_device.max_delta_ns = - clockevent_delta2ns(-1, &time_event_device); - time_event_device.min_delta_ns = - clockevent_delta2ns(1, &time_event_device); - time_event_device.cpumask = cpumask_of(0); - clockevents_register_device(&time_event_device); + clockevents_config_and_register(&time_event_device, clock_rate, 1, -1); irq_number = timer_source.event_id + IRQ_TIMER0; setup_irq(irq_number, &s5p_clock_event_irq); @@ -393,13 +386,9 @@ static void __init s5p_timer_resources(void) clk_enable(tin_source); } -static void __init s5p_timer_init(void) +void __init s5p_timer_init(void) { s5p_timer_resources(); s5p_clockevent_init(); s5p_clocksource_init(); } - -struct sys_timer s5p_timer = { - .init = s5p_timer_init, -}; diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c index 60552e2..73defd0 100644 --- a/arch/arm/plat-samsung/time.c +++ b/arch/arm/plat-samsung/time.c @@ -27,6 +27,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/syscore_ops.h> #include <asm/mach-types.h> @@ -95,7 +96,7 @@ static inline unsigned long timer_ticks_to_usec(unsigned long ticks) * IRQs are disabled before entering here from do_gettimeofday() */ -static unsigned long s3c2410_gettimeoffset (void) +static u32 s3c2410_gettimeoffset(void) { unsigned long tdone; unsigned long tval; @@ -120,7 +121,7 @@ static unsigned long s3c2410_gettimeoffset (void) tdone += timer_startval; } - return timer_ticks_to_usec(tdone); + return timer_ticks_to_usec(tdone) * 1000; } @@ -271,15 +272,16 @@ static void __init s3c2410_timer_resources(void) clk_enable(tin); } -static void __init s3c2410_timer_init(void) +static struct syscore_ops s3c24xx_syscore_ops = { + .resume = s3c2410_timer_setup, +}; + +void __init s3c24xx_timer_init(void) { + arch_gettimeoffset = s3c2410_gettimeoffset; + s3c2410_timer_resources(); s3c2410_timer_setup(); setup_irq(IRQ_TIMER4, &s3c2410_timer_irq); + register_syscore_ops(&s3c24xx_syscore_ops); } - -struct sys_timer s3c24xx_timer = { - .init = s3c2410_timer_init, - .offset = s3c2410_gettimeoffset, - .resume = s3c2410_timer_setup -}; diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 87dbd81..739d016 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -10,6 +10,7 @@ choice config ARCH_SPEAR13XX bool "ST SPEAr13xx with Device Tree" + select ARCH_HAVE_CPUFREQ select ARM_GIC select CPU_V7 select GPIO_SPEAR_SPICS diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 2ce6cb1..51b2dc9 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -38,6 +38,5 @@ static inline void flush(void) * nothing to do */ #define arch_decomp_setup() -#define arch_decomp_wdog() #endif /* __PLAT_UNCOMPRESS_H */ diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index 4f99011..7d4616d5 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -11,8 +11,8 @@ * warranty of any kind, whether express or implied. */ #include <linux/io.h> +#include <linux/amba/sp810.h> #include <asm/system_misc.h> -#include <asm/hardware/sp810.h> #include <mach/spear.h> #include <mach/generic.h> diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index 03321af..bd5c53c 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -186,15 +186,9 @@ static void __init spear_clockevent_init(int irq) tick_rate = clk_get_rate(gpt_clk); tick_rate >>= CTRL_PRESCALER16; - clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE); - - clkevt.max_delta_ns = clockevent_delta2ns(0xfff0, - &clkevt); - clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt); - clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt); + clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0); setup_irq(irq, &spear_timer_irq); } diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 04ca493..f2ac155 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -14,10 +14,10 @@ #include <linux/device.h> #include <linux/jiffies.h> #include <linux/smp.h> +#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> -#include <asm/hardware/gic.h> /* * Write pen_release in a way that is guaranteed to be visible to all @@ -79,7 +79,7 @@ int __cpuinit versatile_boot_secondary(unsigned int cpu, struct task_struct *idl * the boot monitor to read the system wide flags register, * and branch to the address found there. */ - gic_raise_softirq(cpumask_of(cpu), 0); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 7a32976..8dc0605 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -59,14 +59,16 @@ static int map_foreign_page(unsigned long lpfn, unsigned long fgmfn, }; xen_ulong_t idx = fgmfn; xen_pfn_t gpfn = lpfn; + int err = 0; set_xen_guest_handle(xatp.idxs, &idx); set_xen_guest_handle(xatp.gpfns, &gpfn); + set_xen_guest_handle(xatp.errs, &err); rc = HYPERVISOR_memory_op(XENMEM_add_to_physmap_range, &xatp); - if (rc) { - pr_warn("Failed to map pfn to mfn rc:%d pfn:%lx mfn:%lx\n", - rc, lpfn, fgmfn); + if (rc || err) { + pr_warn("Failed to map pfn to mfn rc:%d:%d pfn:%lx mfn:%lx\n", + rc, err, lpfn, fgmfn); return 1; } return 0; |