diff options
Diffstat (limited to 'arch/cris')
-rw-r--r-- | arch/cris/Kconfig | 34 | ||||
-rw-r--r-- | arch/cris/arch-v10/kernel/kgdb.c | 870 | ||||
-rw-r--r-- | arch/cris/arch-v32/drivers/Kconfig | 8 | ||||
-rw-r--r-- | arch/cris/include/arch-v10/arch/bitops.h | 2 | ||||
-rw-r--r-- | arch/cris/include/asm/Kbuild | 4 | ||||
-rw-r--r-- | arch/cris/include/asm/io.h | 3 | ||||
-rw-r--r-- | arch/cris/include/asm/linkage.h | 6 | ||||
-rw-r--r-- | arch/cris/include/asm/page.h | 1 | ||||
-rw-r--r-- | arch/cris/include/asm/pgtable.h | 3 | ||||
-rw-r--r-- | arch/cris/mm/init.c | 37 |
10 files changed, 281 insertions, 687 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 8769a90..3201ddb 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -134,11 +134,13 @@ config SVINTO_SIM config ETRAXFS bool "ETRAX-FS-V32" + select CPU_FREQ_TABLE if CPU_FREQ help Support CRIS V32. config CRIS_MACH_ARTPEC3 bool "ARTPEC-3" + select CPU_FREQ_TABLE if CPU_FREQ help Support Axis ARTPEC-3. @@ -637,40 +639,10 @@ endchoice endmenu -source "drivers/base/Kconfig" - -# standard linux drivers -source "drivers/mtd/Kconfig" - -source "drivers/parport/Kconfig" - -source "drivers/pnp/Kconfig" - -source "drivers/block/Kconfig" - -source "drivers/ide/Kconfig" - -source "drivers/net/Kconfig" - -source "drivers/i2c/Kconfig" - -source "drivers/rtc/Kconfig" - -# -# input before char - char/joystick depends on it. As does USB. -# -source "drivers/input/Kconfig" - -source "drivers/char/Kconfig" +source "drivers/Kconfig" source "fs/Kconfig" -source "drivers/usb/Kconfig" - -source "drivers/uwb/Kconfig" - -source "drivers/staging/Kconfig" - source "arch/cris/Kconfig.debug" source "security/Kconfig" diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 37e6d2c..22d846b 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -230,46 +230,6 @@ struct register_image unsigned int usp; /* 0x66 User mode stack pointer */ } registers; -/************** Prototypes for local library functions ***********************/ - -/* Copy of strcpy from libc. */ -static char *gdb_cris_strcpy (char *s1, const char *s2); - -/* Copy of strlen from libc. */ -static int gdb_cris_strlen (const char *s); - -/* Copy of memchr from libc. */ -static void *gdb_cris_memchr (const void *s, int c, int n); - -/* Copy of strtol from libc. Does only support base 16. */ -static int gdb_cris_strtol (const char *s, char **endptr, int base); - -/********************** Prototypes for local functions. **********************/ -/* Copy the content of a register image into another. The size n is - the size of the register image. Due to struct assignment generation of - memcpy in libc. */ -static void copy_registers (registers *dptr, registers *sptr, int n); - -/* Copy the stored registers from the stack. Put the register contents - of thread thread_id in the struct reg. */ -static void copy_registers_from_stack (int thread_id, registers *reg); - -/* Copy the registers to the stack. Put the register contents of thread - thread_id from struct reg to the stack. */ -static void copy_registers_to_stack (int thread_id, registers *reg); - -/* Write a value to a specified register regno in the register image - of the current thread. */ -static int write_register (int regno, char *val); - -/* Write a value to a specified register in the stack of a thread other - than the current thread. */ -static int write_stack_register(int thread_id, int regno, char *valptr); - -/* Read a value from a specified register in the register image. Returns the - status of the read operation. The register value is returned in valptr. */ -static int read_register (char regno, unsigned int *valptr); - /* Serial port, reads one character. ETRAX 100 specific. from debugport.c */ int getDebugChar (void); @@ -278,42 +238,6 @@ void putDebugChar (int val); void enableDebugIRQ (void); -/* Returns the integer equivalent of a hexadecimal character. */ -static int hex (char ch); - -/* Convert the memory, pointed to by mem into hexadecimal representation. - Put the result in buf, and return a pointer to the last character - in buf (null). */ -static char *mem2hex (char *buf, unsigned char *mem, int count); - -/* Convert the array, in hexadecimal representation, pointed to by buf into - binary representation. Put the result in mem, and return a pointer to - the character after the last byte written. */ -static unsigned char *hex2mem (unsigned char *mem, char *buf, int count); - -/* Put the content of the array, in binary representation, pointed to by buf - into memory pointed to by mem, and return a pointer to - the character after the last byte written. */ -static unsigned char *bin2mem (unsigned char *mem, unsigned char *buf, int count); - -/* Await the sequence $<data>#<checksum> and store <data> in the array buffer - returned. */ -static void getpacket (char *buffer); - -/* Send $<data>#<checksum> from the <data> in the array buffer. */ -static void putpacket (char *buffer); - -/* Build and send a response packet in order to inform the host the - stub is stopped. */ -static void stub_is_stopped (int sigval); - -/* All expected commands are sent from remote.c. Send a response according - to the description in remote.c. */ -static void handle_exception (int sigval); - -/* Performs a complete re-start from scratch. ETRAX specific. */ -static void kill_restart (void); - /******************** Prototypes for global functions. ***********************/ /* The string str is prepended with the GDB printout token and sent. */ @@ -336,10 +260,6 @@ extern unsigned char executing_task; /* The number of characters used for a 64 bit thread identifier. */ #define HEXCHARS_IN_THREAD_ID 16 -/* Avoid warning as the internal_stack is not used in the C-code. */ -#define USEDVAR(name) { if (name) { ; } } -#define USEDFUN(name) { void (*pf)(void) = (void *)name; USEDVAR(pf) } - /********************************** Packet I/O ******************************/ /* BUFMAX defines the maximum number of characters in inbound/outbound buffers */ @@ -405,7 +325,7 @@ static int register_size[] = /* Contains the register image of the executing thread in the assembler part of the code in order to avoid horrible addressing modes. */ -static registers reg; +registers cris_reg; /* FIXME: Should this be used? Delete otherwise. */ /* Contains the assumed consistency state of the register image. Uses the @@ -413,7 +333,7 @@ static registers reg; static int consistency_status = SUCCESS; /********************************** Handle exceptions ************************/ -/* The variable reg contains the register image associated with the +/* The variable cris_reg contains the register image associated with the current_thread_c variable. It is a complete register image created at entry. The reg_g contains a register image of a task where the general registers are taken from the stack and all special registers are taken @@ -421,18 +341,10 @@ static int consistency_status = SUCCESS; in order to provide access mainly for 'g', 'G' and 'P'. */ -/* Need two task id pointers in order to handle Hct and Hgt commands. */ -static int current_thread_c = 0; -static int current_thread_g = 0; - -/* Need two register images in order to handle Hct and Hgt commands. The - variable reg_g is in addition to reg above. */ -static registers reg_g; - /********************************** Breakpoint *******************************/ /* Use an internal stack in the breakpoint and interrupt response routines */ #define INTERNAL_STACK_SIZE 1024 -static char internal_stack[INTERNAL_STACK_SIZE]; +char internal_stack[INTERNAL_STACK_SIZE]; /* Due to the breakpoint return pointer, a state variable is needed to keep track of whether it is a static (compiled) or dynamic (gdb-invoked) @@ -500,164 +412,6 @@ gdb_cris_strtol (const char *s, char **endptr, int base) return x; } -/********************************* Register image ****************************/ -/* Copy the content of a register image into another. The size n is - the size of the register image. Due to struct assignment generation of - memcpy in libc. */ -static void -copy_registers (registers *dptr, registers *sptr, int n) -{ - unsigned char *dreg; - unsigned char *sreg; - - for (dreg = (unsigned char*)dptr, sreg = (unsigned char*)sptr; n > 0; n--) - *dreg++ = *sreg++; -} - -#ifdef PROCESS_SUPPORT -/* Copy the stored registers from the stack. Put the register contents - of thread thread_id in the struct reg. */ -static void -copy_registers_from_stack (int thread_id, registers *regptr) -{ - int j; - stack_registers *s = (stack_registers *)stack_list[thread_id]; - unsigned int *d = (unsigned int *)regptr; - - for (j = 13; j >= 0; j--) - *d++ = s->r[j]; - regptr->sp = (unsigned int)stack_list[thread_id]; - regptr->pc = s->pc; - regptr->dccr = s->dccr; - regptr->srp = s->srp; -} - -/* Copy the registers to the stack. Put the register contents of thread - thread_id from struct reg to the stack. */ -static void -copy_registers_to_stack (int thread_id, registers *regptr) -{ - int i; - stack_registers *d = (stack_registers *)stack_list[thread_id]; - unsigned int *s = (unsigned int *)regptr; - - for (i = 0; i < 14; i++) { - d->r[i] = *s++; - } - d->pc = regptr->pc; - d->dccr = regptr->dccr; - d->srp = regptr->srp; -} -#endif - -/* Write a value to a specified register in the register image of the current - thread. Returns status code SUCCESS, E02 or E05. */ -static int -write_register (int regno, char *val) -{ - int status = SUCCESS; - registers *current_reg = ® - - if (regno >= R0 && regno <= PC) { - /* 32-bit register with simple offset. */ - hex2mem ((unsigned char *)current_reg + regno * sizeof(unsigned int), - val, sizeof(unsigned int)); - } - else if (regno == P0 || regno == VR || regno == P4 || regno == P8) { - /* Do not support read-only registers. */ - status = E02; - } - else if (regno == CCR) { - /* 16 bit register with complex offset. (P4 is read-only, P6 is not implemented, - and P7 (MOF) is 32 bits in ETRAX 100LX. */ - hex2mem ((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short), - val, sizeof(unsigned short)); - } - else if (regno >= MOF && regno <= USP) { - /* 32 bit register with complex offset. (P8 has been taken care of.) */ - hex2mem ((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int), - val, sizeof(unsigned int)); - } - else { - /* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */ - status = E05; - } - return status; -} - -#ifdef PROCESS_SUPPORT -/* Write a value to a specified register in the stack of a thread other - than the current thread. Returns status code SUCCESS or E07. */ -static int -write_stack_register (int thread_id, int regno, char *valptr) -{ - int status = SUCCESS; - stack_registers *d = (stack_registers *)stack_list[thread_id]; - unsigned int val; - - hex2mem ((unsigned char *)&val, valptr, sizeof(unsigned int)); - if (regno >= R0 && regno < SP) { - d->r[regno] = val; - } - else if (regno == SP) { - stack_list[thread_id] = val; - } - else if (regno == PC) { - d->pc = val; - } - else if (regno == SRP) { - d->srp = val; - } - else if (regno == DCCR) { - d->dccr = val; - } - else { - /* Do not support registers in the current thread. */ - status = E07; - } - return status; -} -#endif - -/* Read a value from a specified register in the register image. Returns the - value in the register or -1 for non-implemented registers. - Should check consistency_status after a call which may be E05 after changes - in the implementation. */ -static int -read_register (char regno, unsigned int *valptr) -{ - registers *current_reg = ® - - if (regno >= R0 && regno <= PC) { - /* 32-bit register with simple offset. */ - *valptr = *(unsigned int *)((char *)current_reg + regno * sizeof(unsigned int)); - return SUCCESS; - } - else if (regno == P0 || regno == VR) { - /* 8 bit register with complex offset. */ - *valptr = (unsigned int)(*(unsigned char *) - ((char *)&(current_reg->p0) + (regno-P0) * sizeof(char))); - return SUCCESS; - } - else if (regno == P4 || regno == CCR) { - /* 16 bit register with complex offset. */ - *valptr = (unsigned int)(*(unsigned short *) - ((char *)&(current_reg->p4) + (regno-P4) * sizeof(unsigned short))); - return SUCCESS; - } - else if (regno >= MOF && regno <= USP) { - /* 32 bit register with complex offset. */ - *valptr = *(unsigned int *)((char *)&(current_reg->p8) - + (regno-P8) * sizeof(unsigned int)); - return SUCCESS; - } - else { - /* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */ - consistency_status = E05; - return E05; - } -} - /********************************** Packet I/O ******************************/ /* Returns the integer equivalent of a hexadecimal character. */ static int @@ -676,8 +430,6 @@ hex (char ch) Put the result in buf, and return a pointer to the last character in buf (null). */ -static int do_printk = 0; - static char * mem2hex(char *buf, unsigned char *mem, int count) { @@ -761,7 +513,7 @@ getpacket (char *buffer) xmitcsum = -1; count = 0; /* Read until a # or the end of the buffer is reached */ - while (count < BUFMAX) { + while (count < BUFMAX - 1) { ch = getDebugChar (); if (ch == '#') break; @@ -845,6 +597,81 @@ putDebugString (const unsigned char *str, int length) putpacket(remcomOutBuffer); } +/********************************* Register image ****************************/ +/* Write a value to a specified register in the register image of the current + thread. Returns status code SUCCESS, E02 or E05. */ +static int +write_register (int regno, char *val) +{ + int status = SUCCESS; + registers *current_reg = &cris_reg; + + if (regno >= R0 && regno <= PC) { + /* 32-bit register with simple offset. */ + hex2mem ((unsigned char *)current_reg + regno * sizeof(unsigned int), + val, sizeof(unsigned int)); + } + else if (regno == P0 || regno == VR || regno == P4 || regno == P8) { + /* Do not support read-only registers. */ + status = E02; + } + else if (regno == CCR) { + /* 16 bit register with complex offset. (P4 is read-only, P6 is not implemented, + and P7 (MOF) is 32 bits in ETRAX 100LX. */ + hex2mem ((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short), + val, sizeof(unsigned short)); + } + else if (regno >= MOF && regno <= USP) { + /* 32 bit register with complex offset. (P8 has been taken care of.) */ + hex2mem ((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int), + val, sizeof(unsigned int)); + } + else { + /* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */ + status = E05; + } + return status; +} + +/* Read a value from a specified register in the register image. Returns the + value in the register or -1 for non-implemented registers. + Should check consistency_status after a call which may be E05 after changes + in the implementation. */ +static int +read_register (char regno, unsigned int *valptr) +{ + registers *current_reg = &cris_reg; + + if (regno >= R0 && regno <= PC) { + /* 32-bit register with simple offset. */ + *valptr = *(unsigned int *)((char *)current_reg + regno * sizeof(unsigned int)); + return SUCCESS; + } + else if (regno == P0 || regno == VR) { + /* 8 bit register with complex offset. */ + *valptr = (unsigned int)(*(unsigned char *) + ((char *)&(current_reg->p0) + (regno-P0) * sizeof(char))); + return SUCCESS; + } + else if (regno == P4 || regno == CCR) { + /* 16 bit register with complex offset. */ + *valptr = (unsigned int)(*(unsigned short *) + ((char *)&(current_reg->p4) + (regno-P4) * sizeof(unsigned short))); + return SUCCESS; + } + else if (regno >= MOF && regno <= USP) { + /* 32 bit register with complex offset. */ + *valptr = *(unsigned int *)((char *)&(current_reg->p8) + + (regno-P8) * sizeof(unsigned int)); + return SUCCESS; + } + else { + /* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */ + consistency_status = E05; + return E05; + } +} + /********************************** Handle exceptions ************************/ /* Build and send a response packet in order to inform the host the stub is stopped. TAAn...:r...;n...:r...;n...:r...; @@ -891,26 +718,6 @@ stub_is_stopped(int sigval) } -#ifdef PROCESS_SUPPORT - /* Store the registers of the executing thread. Assume that both step, - continue, and register content requests are with respect to this - thread. The executing task is from the operating system scheduler. */ - - current_thread_c = executing_task; - current_thread_g = executing_task; - - /* A struct assignment translates into a libc memcpy call. Avoid - all libc functions in order to prevent recursive break points. */ - copy_registers (®_g, ®, sizeof(registers)); - - /* Store thread:r...; with the executing task TID. */ - gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:"); - pos += gdb_cris_strlen ("thread:"); - remcomOutBuffer[pos++] = hex_asc_hi(executing_task); - remcomOutBuffer[pos++] = hex_asc_lo(executing_task); - gdb_cris_strcpy (&remcomOutBuffer[pos], ";"); -#endif - /* null-terminate and send it off */ *ptr = 0; @@ -918,16 +725,18 @@ stub_is_stopped(int sigval) putpacket (remcomOutBuffer); } +/* Performs a complete re-start from scratch. */ +static void +kill_restart (void) +{ + machine_restart(""); +} + /* All expected commands are sent from remote.c. Send a response according to the description in remote.c. */ -static void +void handle_exception (int sigval) { - /* Avoid warning of not used. */ - - USEDFUN(handle_exception); - USEDVAR(internal_stack[0]); - /* Send response. */ stub_is_stopped (sigval); @@ -943,19 +752,7 @@ handle_exception (int sigval) in a register are in the same order the machine uses. Failure: void. */ - { -#ifdef PROCESS_SUPPORT - /* Use the special register content in the executing thread. */ - copy_registers (®_g, ®, sizeof(registers)); - /* Replace the content available on the stack. */ - if (current_thread_g != executing_task) { - copy_registers_from_stack (current_thread_g, ®_g); - } - mem2hex ((unsigned char *)remcomOutBuffer, (unsigned char *)®_g, sizeof(registers)); -#else - mem2hex(remcomOutBuffer, (char *)®, sizeof(registers)); -#endif - } + mem2hex(remcomOutBuffer, (char *)&cris_reg, sizeof(registers)); break; case 'G': @@ -963,17 +760,7 @@ handle_exception (int sigval) Each byte of register data is described by two hex digits. Success: OK Failure: void. */ -#ifdef PROCESS_SUPPORT - hex2mem ((unsigned char *)®_g, &remcomInBuffer[1], sizeof(registers)); - if (current_thread_g == executing_task) { - copy_registers (®, ®_g, sizeof(registers)); - } - else { - copy_registers_to_stack(current_thread_g, ®_g); - } -#else - hex2mem((char *)®, &remcomInBuffer[1], sizeof(registers)); -#endif + hex2mem((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers)); gdb_cris_strcpy (remcomOutBuffer, "OK"); break; @@ -989,12 +776,7 @@ handle_exception (int sigval) char *suffix; int regno = gdb_cris_strtol (&remcomInBuffer[1], &suffix, 16); int status; -#ifdef PROCESS_SUPPORT - if (current_thread_g != executing_task) - status = write_stack_register (current_thread_g, regno, suffix+1); - else -#endif - status = write_register (regno, suffix+1); + status = write_register (regno, suffix+1); switch (status) { case E02: @@ -1073,7 +855,7 @@ handle_exception (int sigval) Success: return to the executing thread. Failure: will never know. */ if (remcomInBuffer[1] != '\0') { - reg.pc = gdb_cris_strtol (&remcomInBuffer[1], 0, 16); + cris_reg.pc = gdb_cris_strtol (&remcomInBuffer[1], 0, 16); } enableDebugIRQ(); return; @@ -1129,119 +911,6 @@ handle_exception (int sigval) Not supported: E04 */ gdb_cris_strcpy (remcomOutBuffer, error_message[E04]); break; -#ifdef PROCESS_SUPPORT - - case 'T': - /* Thread alive. TXX - Is thread XX alive? - Success: OK, thread XX is alive. - Failure: E03, thread XX is dead. */ - { - int thread_id = (int)gdb_cris_strtol (&remcomInBuffer[1], 0, 16); - /* Cannot tell whether it is alive or not. */ - if (thread_id >= 0 && thread_id < number_of_tasks) - gdb_cris_strcpy (remcomOutBuffer, "OK"); - } - break; - - case 'H': - /* Set thread for subsequent operations: Hct - c = 'c' for thread used in step and continue; - t can be -1 for all threads. - c = 'g' for thread used in other operations. - t = 0 means pick any thread. - Success: OK - Failure: E01 */ - { - int thread_id = gdb_cris_strtol (&remcomInBuffer[2], 0, 16); - if (remcomInBuffer[1] == 'c') { - /* c = 'c' for thread used in step and continue */ - /* Do not change current_thread_c here. It would create a mess in - the scheduler. */ - gdb_cris_strcpy (remcomOutBuffer, "OK"); - } - else if (remcomInBuffer[1] == 'g') { - /* c = 'g' for thread used in other operations. - t = 0 means pick any thread. Impossible since the scheduler does - not allow that. */ - if (thread_id >= 0 && thread_id < number_of_tasks) { - current_thread_g = thread_id; - gdb_cris_strcpy (remcomOutBuffer, "OK"); - } - else { - /* Not expected - send an error message. */ - gdb_cris_strcpy (remcomOutBuffer, error_message[E01]); - } - } - else { - /* Not expected - send an error message. */ - gdb_cris_strcpy (remcomOutBuffer, error_message[E01]); - } - } - break; - - case 'q': - case 'Q': - /* Query of general interest. qXXXX - Set general value XXXX. QXXXX=yyyy */ - { - int pos; - int nextpos; - int thread_id; - - switch (remcomInBuffer[1]) { - case 'C': - /* Identify the remote current thread. */ - gdb_cris_strcpy (&remcomOutBuffer[0], "QC"); - remcomOutBuffer[2] = hex_asc_hi(current_thread_c); - remcomOutBuffer[3] = hex_asc_lo(current_thread_c); - remcomOutBuffer[4] = '\0'; - break; - case 'L': - gdb_cris_strcpy (&remcomOutBuffer[0], "QM"); - /* Reply with number of threads. */ - if (os_is_started()) { - remcomOutBuffer[2] = hex_asc_hi(number_of_tasks); - remcomOutBuffer[3] = hex_asc_lo(number_of_tasks); - } - else { - remcomOutBuffer[2] = hex_asc_hi(0); - remcomOutBuffer[3] = hex_asc_lo(1); - } - /* Done with the reply. */ - remcomOutBuffer[4] = hex_asc_lo(1); - pos = 5; - /* Expects the argument thread id. */ - for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++) - remcomOutBuffer[pos] = remcomInBuffer[pos]; - /* Reply with the thread identifiers. */ - if (os_is_started()) { - /* Store the thread identifiers of all tasks. */ - for (thread_id = 0; thread_id < number_of_tasks; thread_id++) { - nextpos = pos + HEXCHARS_IN_THREAD_ID - 1; - for (; pos < nextpos; pos ++) - remcomOutBuffer[pos] = hex_asc_lo(0); - remcomOutBuffer[pos++] = hex_asc_lo(thread_id); - } - } - else { - /* Store the thread identifier of the boot task. */ - nextpos = pos + HEXCHARS_IN_THREAD_ID - 1; - for (; pos < nextpos; pos ++) - remcomOutBuffer[pos] = hex_asc_lo(0); - remcomOutBuffer[pos++] = hex_asc_lo(current_thread_c); - } - remcomOutBuffer[pos] = '\0'; - break; - default: - /* Not supported: "" */ - /* Request information about section offsets: qOffsets. */ - remcomOutBuffer[0] = 0; - break; - } - } - break; -#endif /* PROCESS_SUPPORT */ default: /* The stub should ignore other request and send an empty @@ -1254,13 +923,6 @@ handle_exception (int sigval) } } -/* Performs a complete re-start from scratch. */ -static void -kill_restart () -{ - machine_restart(""); -} - /********************************** Breakpoint *******************************/ /* The hook for both a static (compiled) and a dynamic breakpoint set by GDB. An internal stack is used by the stub. The register image of the caller is @@ -1270,93 +932,93 @@ kill_restart () void kgdb_handle_breakpoint(void); -asm (" - .global kgdb_handle_breakpoint -kgdb_handle_breakpoint: -;; -;; Response to the break-instruction -;; -;; Create a register image of the caller -;; - move $dccr,[reg+0x5E] ; Save the flags in DCCR before disable interrupts - di ; Disable interrupts - move.d $r0,[reg] ; Save R0 - move.d $r1,[reg+0x04] ; Save R1 - move.d $r2,[reg+0x08] ; Save R2 - move.d $r3,[reg+0x0C] ; Save R3 - move.d $r4,[reg+0x10] ; Save R4 - move.d $r5,[reg+0x14] ; Save R5 - move.d $r6,[reg+0x18] ; Save R6 - move.d $r7,[reg+0x1C] ; Save R7 - move.d $r8,[reg+0x20] ; Save R8 - move.d $r9,[reg+0x24] ; Save R9 - move.d $r10,[reg+0x28] ; Save R10 - move.d $r11,[reg+0x2C] ; Save R11 - move.d $r12,[reg+0x30] ; Save R12 - move.d $r13,[reg+0x34] ; Save R13 - move.d $sp,[reg+0x38] ; Save SP (R14) -;; Due to the old assembler-versions BRP might not be recognized - .word 0xE670 ; move brp,$r0 - subq 2,$r0 ; Set to address of previous instruction. - move.d $r0,[reg+0x3c] ; Save the address in PC (R15) - clear.b [reg+0x40] ; Clear P0 - move $vr,[reg+0x41] ; Save special register P1 - clear.w [reg+0x42] ; Clear P4 - move $ccr,[reg+0x44] ; Save special register CCR - move $mof,[reg+0x46] ; P7 - clear.d [reg+0x4A] ; Clear P8 - move $ibr,[reg+0x4E] ; P9, - move $irp,[reg+0x52] ; P10, - move $srp,[reg+0x56] ; P11, - move $dtp0,[reg+0x5A] ; P12, register BAR, assembler might not know BAR - ; P13, register DCCR already saved -;; Due to the old assembler-versions BRP might not be recognized - .word 0xE670 ; move brp,r0 -;; Static (compiled) breakpoints must return to the next instruction in order -;; to avoid infinite loops. Dynamic (gdb-invoked) must restore the instruction -;; in order to execute it when execution is continued. - test.b [is_dyn_brkp] ; Is this a dynamic breakpoint? - beq is_static ; No, a static breakpoint - nop - subq 2,$r0 ; rerun the instruction the break replaced -is_static: - moveq 1,$r1 - move.b $r1,[is_dyn_brkp] ; Set the state variable to dynamic breakpoint - move.d $r0,[reg+0x62] ; Save the return address in BRP - move $usp,[reg+0x66] ; USP -;; -;; Handle the communication -;; - move.d internal_stack+1020,$sp ; Use the internal stack which grows upward - moveq 5,$r10 ; SIGTRAP - jsr handle_exception ; Interactive routine -;; -;; Return to the caller -;; - move.d [reg],$r0 ; Restore R0 - move.d [reg+0x04],$r1 ; Restore R1 - move.d [reg+0x08],$r2 ; Restore R2 - move.d [reg+0x0C],$r3 ; Restore R3 - move.d [reg+0x10],$r4 ; Restore R4 - move.d [reg+0x14],$r5 ; Restore R5 - move.d [reg+0x18],$r6 ; Restore R6 - move.d [reg+0x1C],$r7 ; Restore R7 - move.d [reg+0x20],$r8 ; Restore R8 - move.d [reg+0x24],$r9 ; Restore R9 - move.d [reg+0x28],$r10 ; Restore R10 - move.d [reg+0x2C],$r11 ; Restore R11 - move.d [reg+0x30],$r12 ; Restore R12 - move.d [reg+0x34],$r13 ; Restore R13 -;; -;; FIXME: Which registers should be restored? -;; - move.d [reg+0x38],$sp ; Restore SP (R14) - move [reg+0x56],$srp ; Restore the subroutine return pointer. - move [reg+0x5E],$dccr ; Restore DCCR - move [reg+0x66],$usp ; Restore USP - jump [reg+0x62] ; A jump to the content in register BRP works. - nop ; -"); +asm ("\n" +" .global kgdb_handle_breakpoint\n" +"kgdb_handle_breakpoint:\n" +";;\n" +";; Response to the break-instruction\n" +";;\n" +";; Create a register image of the caller\n" +";;\n" +" move $dccr,[cris_reg+0x5E] ; Save the flags in DCCR before disable interrupts\n" +" di ; Disable interrupts\n" +" move.d $r0,[cris_reg] ; Save R0\n" +" move.d $r1,[cris_reg+0x04] ; Save R1\n" +" move.d $r2,[cris_reg+0x08] ; Save R2\n" +" move.d $r3,[cris_reg+0x0C] ; Save R3\n" +" move.d $r4,[cris_reg+0x10] ; Save R4\n" +" move.d $r5,[cris_reg+0x14] ; Save R5\n" +" move.d $r6,[cris_reg+0x18] ; Save R6\n" +" move.d $r7,[cris_reg+0x1C] ; Save R7\n" +" move.d $r8,[cris_reg+0x20] ; Save R8\n" +" move.d $r9,[cris_reg+0x24] ; Save R9\n" +" move.d $r10,[cris_reg+0x28] ; Save R10\n" +" move.d $r11,[cris_reg+0x2C] ; Save R11\n" +" move.d $r12,[cris_reg+0x30] ; Save R12\n" +" move.d $r13,[cris_reg+0x34] ; Save R13\n" +" move.d $sp,[cris_reg+0x38] ; Save SP (R14)\n" +";; Due to the old assembler-versions BRP might not be recognized\n" +" .word 0xE670 ; move brp,$r0\n" +" subq 2,$r0 ; Set to address of previous instruction.\n" +" move.d $r0,[cris_reg+0x3c] ; Save the address in PC (R15)\n" +" clear.b [cris_reg+0x40] ; Clear P0\n" +" move $vr,[cris_reg+0x41] ; Save special register P1\n" +" clear.w [cris_reg+0x42] ; Clear P4\n" +" move $ccr,[cris_reg+0x44] ; Save special register CCR\n" +" move $mof,[cris_reg+0x46] ; P7\n" +" clear.d [cris_reg+0x4A] ; Clear P8\n" +" move $ibr,[cris_reg+0x4E] ; P9,\n" +" move $irp,[cris_reg+0x52] ; P10,\n" +" move $srp,[cris_reg+0x56] ; P11,\n" +" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n" +" ; P13, register DCCR already saved\n" +";; Due to the old assembler-versions BRP might not be recognized\n" +" .word 0xE670 ; move brp,r0\n" +";; Static (compiled) breakpoints must return to the next instruction in order\n" +";; to avoid infinite loops. Dynamic (gdb-invoked) must restore the instruction\n" +";; in order to execute it when execution is continued.\n" +" test.b [is_dyn_brkp] ; Is this a dynamic breakpoint?\n" +" beq is_static ; No, a static breakpoint\n" +" nop\n" +" subq 2,$r0 ; rerun the instruction the break replaced\n" +"is_static:\n" +" moveq 1,$r1\n" +" move.b $r1,[is_dyn_brkp] ; Set the state variable to dynamic breakpoint\n" +" move.d $r0,[cris_reg+0x62] ; Save the return address in BRP\n" +" move $usp,[cris_reg+0x66] ; USP\n" +";;\n" +";; Handle the communication\n" +";;\n" +" move.d internal_stack+1020,$sp ; Use the internal stack which grows upward\n" +" moveq 5,$r10 ; SIGTRAP\n" +" jsr handle_exception ; Interactive routine\n" +";;\n" +";; Return to the caller\n" +";;\n" +" move.d [cris_reg],$r0 ; Restore R0\n" +" move.d [cris_reg+0x04],$r1 ; Restore R1\n" +" move.d [cris_reg+0x08],$r2 ; Restore R2\n" +" move.d [cris_reg+0x0C],$r3 ; Restore R3\n" +" move.d [cris_reg+0x10],$r4 ; Restore R4\n" +" move.d [cris_reg+0x14],$r5 ; Restore R5\n" +" move.d [cris_reg+0x18],$r6 ; Restore R6\n" +" move.d [cris_reg+0x1C],$r7 ; Restore R7\n" +" move.d [cris_reg+0x20],$r8 ; Restore R8\n" +" move.d [cris_reg+0x24],$r9 ; Restore R9\n" +" move.d [cris_reg+0x28],$r10 ; Restore R10\n" +" move.d [cris_reg+0x2C],$r11 ; Restore R11\n" +" move.d [cris_reg+0x30],$r12 ; Restore R12\n" +" move.d [cris_reg+0x34],$r13 ; Restore R13\n" +";;\n" +";; FIXME: Which registers should be restored?\n" +";;\n" +" move.d [cris_reg+0x38],$sp ; Restore SP (R14)\n" +" move [cris_reg+0x56],$srp ; Restore the subroutine return pointer.\n" +" move [cris_reg+0x5E],$dccr ; Restore DCCR\n" +" move [cris_reg+0x66],$usp ; Restore USP\n" +" jump [cris_reg+0x62] ; A jump to the content in register BRP works.\n" +" nop ;\n" +"\n"); /* The hook for an interrupt generated by GDB. An internal stack is used by the stub. The register image of the caller is stored in the structure @@ -1367,94 +1029,94 @@ is_static: void kgdb_handle_serial(void); -asm (" - .global kgdb_handle_serial -kgdb_handle_serial: -;; -;; Response to a serial interrupt -;; - - move $dccr,[reg+0x5E] ; Save the flags in DCCR - di ; Disable interrupts - move.d $r0,[reg] ; Save R0 - move.d $r1,[reg+0x04] ; Save R1 - move.d $r2,[reg+0x08] ; Save R2 - move.d $r3,[reg+0x0C] ; Save R3 - move.d $r4,[reg+0x10] ; Save R4 - move.d $r5,[reg+0x14] ; Save R5 - move.d $r6,[reg+0x18] ; Save R6 - move.d $r7,[reg+0x1C] ; Save R7 - move.d $r8,[reg+0x20] ; Save R8 - move.d $r9,[reg+0x24] ; Save R9 - move.d $r10,[reg+0x28] ; Save R10 - move.d $r11,[reg+0x2C] ; Save R11 - move.d $r12,[reg+0x30] ; Save R12 - move.d $r13,[reg+0x34] ; Save R13 - move.d $sp,[reg+0x38] ; Save SP (R14) - move $irp,[reg+0x3c] ; Save the address in PC (R15) - clear.b [reg+0x40] ; Clear P0 - move $vr,[reg+0x41] ; Save special register P1, - clear.w [reg+0x42] ; Clear P4 - move $ccr,[reg+0x44] ; Save special register CCR - move $mof,[reg+0x46] ; P7 - clear.d [reg+0x4A] ; Clear P8 - move $ibr,[reg+0x4E] ; P9, - move $irp,[reg+0x52] ; P10, - move $srp,[reg+0x56] ; P11, - move $dtp0,[reg+0x5A] ; P12, register BAR, assembler might not know BAR - ; P13, register DCCR already saved -;; Due to the old assembler-versions BRP might not be recognized - .word 0xE670 ; move brp,r0 - move.d $r0,[reg+0x62] ; Save the return address in BRP - move $usp,[reg+0x66] ; USP - -;; get the serial character (from debugport.c) and check if it is a ctrl-c - - jsr getDebugChar - cmp.b 3, $r10 - bne goback - nop - - move.d [reg+0x5E], $r10 ; Get DCCR - btstq 8, $r10 ; Test the U-flag. - bmi goback - nop - -;; -;; Handle the communication -;; - move.d internal_stack+1020,$sp ; Use the internal stack - moveq 2,$r10 ; SIGINT - jsr handle_exception ; Interactive routine - -goback: -;; -;; Return to the caller -;; - move.d [reg],$r0 ; Restore R0 - move.d [reg+0x04],$r1 ; Restore R1 - move.d [reg+0x08],$r2 ; Restore R2 - move.d [reg+0x0C],$r3 ; Restore R3 - move.d [reg+0x10],$r4 ; Restore R4 - move.d [reg+0x14],$r5 ; Restore R5 - move.d [reg+0x18],$r6 ; Restore R6 - move.d [reg+0x1C],$r7 ; Restore R7 - move.d [reg+0x20],$r8 ; Restore R8 - move.d [reg+0x24],$r9 ; Restore R9 - move.d [reg+0x28],$r10 ; Restore R10 - move.d [reg+0x2C],$r11 ; Restore R11 - move.d [reg+0x30],$r12 ; Restore R12 - move.d [reg+0x34],$r13 ; Restore R13 -;; -;; FIXME: Which registers should be restored? -;; - move.d [reg+0x38],$sp ; Restore SP (R14) - move [reg+0x56],$srp ; Restore the subroutine return pointer. - move [reg+0x5E],$dccr ; Restore DCCR - move [reg+0x66],$usp ; Restore USP - reti ; Return from the interrupt routine - nop -"); +asm ("\n" +" .global kgdb_handle_serial\n" +"kgdb_handle_serial:\n" +";;\n" +";; Response to a serial interrupt\n" +";;\n" +"\n" +" move $dccr,[cris_reg+0x5E] ; Save the flags in DCCR\n" +" di ; Disable interrupts\n" +" move.d $r0,[cris_reg] ; Save R0\n" +" move.d $r1,[cris_reg+0x04] ; Save R1\n" +" move.d $r2,[cris_reg+0x08] ; Save R2\n" +" move.d $r3,[cris_reg+0x0C] ; Save R3\n" +" move.d $r4,[cris_reg+0x10] ; Save R4\n" +" move.d $r5,[cris_reg+0x14] ; Save R5\n" +" move.d $r6,[cris_reg+0x18] ; Save R6\n" +" move.d $r7,[cris_reg+0x1C] ; Save R7\n" +" move.d $r8,[cris_reg+0x20] ; Save R8\n" +" move.d $r9,[cris_reg+0x24] ; Save R9\n" +" move.d $r10,[cris_reg+0x28] ; Save R10\n" +" move.d $r11,[cris_reg+0x2C] ; Save R11\n" +" move.d $r12,[cris_reg+0x30] ; Save R12\n" +" move.d $r13,[cris_reg+0x34] ; Save R13\n" +" move.d $sp,[cris_reg+0x38] ; Save SP (R14)\n" +" move $irp,[cris_reg+0x3c] ; Save the address in PC (R15)\n" +" clear.b [cris_reg+0x40] ; Clear P0\n" +" move $vr,[cris_reg+0x41] ; Save special register P1,\n" +" clear.w [cris_reg+0x42] ; Clear P4\n" +" move $ccr,[cris_reg+0x44] ; Save special register CCR\n" +" move $mof,[cris_reg+0x46] ; P7\n" +" clear.d [cris_reg+0x4A] ; Clear P8\n" +" move $ibr,[cris_reg+0x4E] ; P9,\n" +" move $irp,[cris_reg+0x52] ; P10,\n" +" move $srp,[cris_reg+0x56] ; P11,\n" +" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n" +" ; P13, register DCCR already saved\n" +";; Due to the old assembler-versions BRP might not be recognized\n" +" .word 0xE670 ; move brp,r0\n" +" move.d $r0,[cris_reg+0x62] ; Save the return address in BRP\n" +" move $usp,[cris_reg+0x66] ; USP\n" +"\n" +";; get the serial character (from debugport.c) and check if it is a ctrl-c\n" +"\n" +" jsr getDebugChar\n" +" cmp.b 3, $r10\n" +" bne goback\n" +" nop\n" +"\n" +" move.d [cris_reg+0x5E], $r10 ; Get DCCR\n" +" btstq 8, $r10 ; Test the U-flag.\n" +" bmi goback\n" +" nop\n" +"\n" +";;\n" +";; Handle the communication\n" +";;\n" +" move.d internal_stack+1020,$sp ; Use the internal stack\n" +" moveq 2,$r10 ; SIGINT\n" +" jsr handle_exception ; Interactive routine\n" +"\n" +"goback:\n" +";;\n" +";; Return to the caller\n" +";;\n" +" move.d [cris_reg],$r0 ; Restore R0\n" +" move.d [cris_reg+0x04],$r1 ; Restore R1\n" +" move.d [cris_reg+0x08],$r2 ; Restore R2\n" +" move.d [cris_reg+0x0C],$r3 ; Restore R3\n" +" move.d [cris_reg+0x10],$r4 ; Restore R4\n" +" move.d [cris_reg+0x14],$r5 ; Restore R5\n" +" move.d [cris_reg+0x18],$r6 ; Restore R6\n" +" move.d [cris_reg+0x1C],$r7 ; Restore R7\n" +" move.d [cris_reg+0x20],$r8 ; Restore R8\n" +" move.d [cris_reg+0x24],$r9 ; Restore R9\n" +" move.d [cris_reg+0x28],$r10 ; Restore R10\n" +" move.d [cris_reg+0x2C],$r11 ; Restore R11\n" +" move.d [cris_reg+0x30],$r12 ; Restore R12\n" +" move.d [cris_reg+0x34],$r13 ; Restore R13\n" +";;\n" +";; FIXME: Which registers should be restored?\n" +";;\n" +" move.d [cris_reg+0x38],$sp ; Restore SP (R14)\n" +" move [cris_reg+0x56],$srp ; Restore the subroutine return pointer.\n" +" move [cris_reg+0x5E],$dccr ; Restore DCCR\n" +" move [cris_reg+0x66],$usp ; Restore USP\n" +" reti ; Return from the interrupt routine\n" +" nop\n" +"\n"); /* Use this static breakpoint in the start-up only. */ diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index c55971a..acff3df 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -617,7 +617,6 @@ config ETRAX_PV_CHANGEABLE_BITS config ETRAX_CARDBUS bool "Cardbus support" depends on ETRAX_ARCH_V32 - select HOTPLUG help Enabled the ETRAX Cardbus driver. @@ -641,8 +640,6 @@ config ETRAX_STREAMCOPROC This option enables a driver for the stream co-processor for cryptographic operations. -source drivers/mmc/Kconfig - config ETRAX_MMC_IOP tristate "MMC/SD host driver using IO-processor" depends on ETRAX_ARCH_V32 && MMC @@ -834,9 +831,4 @@ config ETRAX_SPI_MMC_WP_GPIO_PIN The pin to use for the SD/MMC write-protect signal for a memory card. If defined as " " (space), the card is considered writable. -# Avoid choices causing non-working configs by conditionalizing the inclusion. -if ETRAX_SPI_MMC -source drivers/spi/Kconfig -endif - endif diff --git a/arch/cris/include/arch-v10/arch/bitops.h b/arch/cris/include/arch-v10/arch/bitops.h index be85f6d..03d9cfd 100644 --- a/arch/cris/include/arch-v10/arch/bitops.h +++ b/arch/cris/include/arch-v10/arch/bitops.h @@ -17,7 +17,7 @@ static inline unsigned long cris_swapnwbrlz(unsigned long w) in another register: ! __asm__ ("swapnwbr %2\n\tlz %2,%0" ! : "=r,r" (res), "=r,X" (dummy) : "1,0" (w)); - confuses gcc (sched.c, gcc from cris-dist-1.14). */ + confuses gcc (core.c, gcc from cris-dist-1.14). */ unsigned long res; __asm__ ("swapnwbr %0 \n\t" diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild index f1e79ed..c832545 100644 --- a/arch/cris/include/asm/Kbuild +++ b/arch/cris/include/asm/Kbuild @@ -5,5 +5,9 @@ header-y += arch-v32/ generic-y += clkdev.h generic-y += exec.h +generic-y += kvm_para.h +generic-y += linkage.h generic-y += module.h generic-y += trace_clock.h +generic-y += vga.h +generic-y += xor.h diff --git a/arch/cris/include/asm/io.h b/arch/cris/include/asm/io.h index ac12ae2..5d3047e 100644 --- a/arch/cris/include/asm/io.h +++ b/arch/cris/include/asm/io.h @@ -167,6 +167,9 @@ static inline void outsl(unsigned int port, const void *addr, cris_iops->write_io(port, (void *)addr, 4, count); } +#define inb_p(port) inb(port) +#define outb_p(val, port) outb((val), (port)) + /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem * access diff --git a/arch/cris/include/asm/linkage.h b/arch/cris/include/asm/linkage.h deleted file mode 100644 index 291c2d0..0000000 --- a/arch/cris/include/asm/linkage.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -/* Nothing to see here... */ - -#endif diff --git a/arch/cris/include/asm/page.h b/arch/cris/include/asm/page.h index be45ee3..dfc53f9 100644 --- a/arch/cris/include/asm/page.h +++ b/arch/cris/include/asm/page.h @@ -51,7 +51,6 @@ typedef struct page *pgtable_t; */ #define virt_to_page(kaddr) (mem_map + (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT)) -#define VALID_PAGE(page) (((page) - mem_map) < max_mapnr) #define virt_addr_valid(kaddr) pfn_valid((unsigned)(kaddr) >> PAGE_SHIFT) /* convert a page (based on mem_map and forward) to a physical address diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h index 7df4301..8b8c867 100644 --- a/arch/cris/include/asm/pgtable.h +++ b/arch/cris/include/asm/pgtable.h @@ -258,9 +258,6 @@ static inline pgd_t * pgd_offset(const struct mm_struct *mm, unsigned long addre #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %p(%08lx).\n", __FILE__, __LINE__, &(e), pgd_val(e)) -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* defined in head.S */ diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c index 9ac8094..c81af5b 100644 --- a/arch/cris/mm/init.c +++ b/arch/cris/mm/init.c @@ -19,9 +19,6 @@ unsigned long empty_zero_page; void __init mem_init(void) { - int codesize, reservedpages, datasize, initsize; - unsigned long tmp; - BUG_ON(!mem_map); /* max/min_low_pfn was set by setup.c @@ -29,35 +26,9 @@ mem_init(void) * * high_memory was also set in setup.c */ - - max_mapnr = num_physpages = max_low_pfn - min_low_pfn; - - /* this will put all memory onto the freelists */ - totalram_pages = free_all_bootmem(); - - reservedpages = 0; - for (tmp = 0; tmp < max_mapnr; tmp++) { - /* - * Only count reserved RAM pages - */ - if (PageReserved(mem_map + tmp)) - reservedpages++; - } - - codesize = (unsigned long) &_etext - (unsigned long) &_stext; - datasize = (unsigned long) &_edata - (unsigned long) &_etext; - initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; - - printk(KERN_INFO - "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, " - "%dk init)\n" , - nr_free_pages() << (PAGE_SHIFT-10), - max_mapnr << (PAGE_SHIFT-10), - codesize >> 10, - reservedpages << (PAGE_SHIFT-10), - datasize >> 10, - initsize >> 10 - ); + max_mapnr = max_low_pfn - min_low_pfn; + free_all_bootmem(); + mem_init_print_info(NULL); } /* free the pages occupied by initialization code */ @@ -65,5 +36,5 @@ mem_init(void) void free_initmem(void) { - free_initmem_default(0); + free_initmem_default(-1); } |