summaryrefslogtreecommitdiff
path: root/arch/mips/pci/fixup-cobalt.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci/fixup-cobalt.c')
-rw-r--r--arch/mips/pci/fixup-cobalt.c61
1 files changed, 0 insertions, 61 deletions
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index acacd14..9553b14 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -51,67 +51,6 @@ static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
qube_raq_galileo_early_fixup);
-static void __devinit cobalt_legacy_ide_resource_fixup(struct pci_dev *dev,
- struct resource *res)
-{
- struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
- unsigned long offset = hose->io_offset;
- struct resource orig = *res;
-
- if (!(res->flags & IORESOURCE_IO) ||
- !(res->flags & IORESOURCE_PCI_FIXED))
- return;
-
- res->start -= offset;
- res->end -= offset;
- dev_printk(KERN_DEBUG, &dev->dev, "converted legacy %pR to bus %pR\n",
- &orig, res);
-}
-
-static void __devinit cobalt_legacy_ide_fixup(struct pci_dev *dev)
-{
- u32 class;
- u8 progif;
-
- /*
- * If the IDE controller is in legacy mode, pci_setup_device() fills in
- * the resources with the legacy addresses that normally appear on the
- * PCI bus, just as if we had read them from a BAR.
- *
- * However, with the GT-64111, those legacy addresses, e.g., 0x1f0,
- * will never appear on the PCI bus because it converts memory accesses
- * in the PCI I/O region (which is never at address zero) into I/O port
- * accesses with no address translation.
- *
- * For example, if GT_DEF_PCI0_IO_BASE is 0x10000000, a load or store
- * to physical address 0x100001f0 will become a PCI access to I/O port
- * 0x100001f0. There's no way to generate an access to I/O port 0x1f0,
- * but the VT82C586 IDE controller does respond at 0x100001f0 because
- * it only decodes the low 24 bits of the address.
- *
- * When this quirk runs, the pci_dev resources should contain bus
- * addresses, not Linux I/O port numbers, so convert legacy addresses
- * like 0x1f0 to bus addresses like 0x100001f0. Later, we'll convert
- * them back with pcibios_fixup_bus() or pcibios_bus_to_resource().
- */
- class = dev->class >> 8;
- if (class != PCI_CLASS_STORAGE_IDE)
- return;
-
- pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
- if ((progif & 1) == 0) {
- cobalt_legacy_ide_resource_fixup(dev, &dev->resource[0]);
- cobalt_legacy_ide_resource_fixup(dev, &dev->resource[1]);
- }
- if ((progif & 4) == 0) {
- cobalt_legacy_ide_resource_fixup(dev, &dev->resource[2]);
- cobalt_legacy_ide_resource_fixup(dev, &dev->resource[3]);
- }
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
- cobalt_legacy_ide_fixup);
-
static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
{
unsigned short cfgword;