diff options
Diffstat (limited to 'arch/mips')
877 files changed, 16061 insertions, 15915 deletions
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index 91b9d69..4b597d9 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -18,10 +18,10 @@ platforms += loongson1 platforms += mti-malta platforms += mti-sead3 platforms += netlogic -platforms += pmc-sierra +platforms += pmcs-msp71xx platforms += pnx833x -platforms += pnx8550 platforms += powertv +platforms += ralink platforms += rb532 platforms += sgi-ip22 platforms += sgi-ip27 diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 1eabe57..ae9c716 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -108,12 +108,14 @@ config ATH79 config BCM47XX bool "Broadcom BCM47XX based boards" select ARCH_WANT_OPTIONAL_GPIOLIB + select BOOT_RAW select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT select FW_CFE select HW_HAS_PCI select IRQ_CPU + select NO_EXCEPT_FILL select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -295,6 +297,7 @@ config MIPS_MALTA select BOOT_RAW select CEVT_R4K select CSRC_R4K + select CSRC_GIC select DMA_NONCOHERENT select GENERIC_ISA_DMA select HAVE_PCSPKR_PLATFORM @@ -354,6 +357,7 @@ config MIPS_SEAD3 select USB_ARCH_HAS_EHCI select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO + select USE_OF help This enables support for the MIPS Technologies SEAD3 evaluation board. @@ -385,16 +389,6 @@ config NXP_STB225 help Support for NXP Semiconductors STB225 Development Board. -config PNX8550_JBS - bool "NXP PNX8550 based JBS board" - select PNX8550 - select SYS_SUPPORTS_LITTLE_ENDIAN - -config PNX8550_STB810 - bool "NXP PNX8550 based STB810 board" - select PNX8550 - select SYS_SUPPORTS_LITTLE_ENDIAN - config PMC_MSP bool "PMC-Sierra MSP chipsets" select CEVT_R4K @@ -434,6 +428,22 @@ config POWERTV help This enables support for the Cisco PowerTV Platform. +config RALINK + bool "Ralink based machines" + select CEVT_R4K + select CSRC_R4K + select BOOT_RAW + select DMA_NONCOHERENT + select IRQ_CPU + select USE_OF + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + select HAVE_MACH_CLKDEV + select CLKDEV_LOOKUP + config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" select FW_ARC @@ -835,8 +845,9 @@ source "arch/mips/jazz/Kconfig" source "arch/mips/jz4740/Kconfig" source "arch/mips/lantiq/Kconfig" source "arch/mips/lasat/Kconfig" -source "arch/mips/pmc-sierra/Kconfig" +source "arch/mips/pmcs-msp71xx/Kconfig" source "arch/mips/powertv/Kconfig" +source "arch/mips/ralink/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" source "arch/mips/txx9/Kconfig" @@ -917,6 +928,9 @@ config CSRC_POWERTV config CSRC_R4K bool +config CSRC_GIC + bool + config CSRC_SB1250 bool @@ -1103,19 +1117,6 @@ config SOC_PNX8335 bool select SOC_PNX833X -config PNX8550 - bool - select SOC_PNX8550 - -config SOC_PNX8550 - bool - select DMA_NONCOHERENT - select HW_HAS_PCI - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL - select GENERIC_GPIO - config SWAP_IO_SPACE bool diff --git a/arch/mips/Makefile b/arch/mips/Makefile index f2dfd40..6f7978f 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -191,7 +191,7 @@ endif include $(srctree)/arch/mips/Kbuild.platforms ifdef CONFIG_PHYSICAL_START -load-y = $(CONFIG_PHYSICAL_START) +load-y = $(CONFIG_PHYSICAL_START) endif cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform index 942c580..fa1bdd1 100644 --- a/arch/mips/alchemy/Platform +++ b/arch/mips/alchemy/Platform @@ -1,7 +1,7 @@ # # Core Alchemy code # -platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/ +platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/ # @@ -45,7 +45,7 @@ load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000 # # MyCable eval board # -platform-$(CONFIG_MIPS_XXS1500) += alchemy/ +platform-$(CONFIG_MIPS_XXS1500) += alchemy/ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 # @@ -56,7 +56,7 @@ load-$(CONFIG_MIPS_GPR) += 0xffffffff80100000 # boards can specify their own <gpio.h> in one of their include dirs. # If they do, placing this line here at the end will make sure the -# compiler picks the board one. If they don't, it will make sure +# compiler picks the board one. If they don't, it will make sure # the alchemy generic gpio header is picked up. cflags-$(CONFIG_MIPS_ALCHEMY) += -I$(srctree)/arch/mips/include/asm/mach-au1x00 diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c index ba32590..cb0f6af 100644 --- a/arch/mips/alchemy/board-gpr.c +++ b/arch/mips/alchemy/board-gpr.c @@ -135,33 +135,33 @@ static struct mtd_partition gpr_mtd_partitions[] = { { .name = "kernel", .size = 0x00200000, - .offset = 0, + .offset = 0, }, { .name = "rootfs", .size = 0x00800000, - .offset = MTDPART_OFS_APPEND, + .offset = MTDPART_OFS_APPEND, .mask_flags = MTD_WRITEABLE, }, { .name = "config", .size = 0x00200000, - .offset = 0x01d00000, + .offset = 0x01d00000, }, { .name = "yamon", .size = 0x00100000, - .offset = 0x01c00000, + .offset = 0x01c00000, }, { .name = "yamon env vars", .size = 0x00040000, - .offset = MTDPART_OFS_APPEND, + .offset = MTDPART_OFS_APPEND, }, { .name = "kernel+rootfs", .size = 0x00a00000, - .offset = 0, + .offset = 0, }, }; diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index a124c25..4a9baa9 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -173,23 +173,23 @@ static struct mtd_partition mtx1_mtd_partitions[] = { { .name = "filesystem", .size = 0x01C00000, - .offset = 0, + .offset = 0, }, { .name = "yamon", .size = 0x00100000, - .offset = MTDPART_OFS_APPEND, + .offset = MTDPART_OFS_APPEND, .mask_flags = MTD_WRITEABLE, }, { .name = "kernel", .size = 0x002c0000, - .offset = MTDPART_OFS_APPEND, + .offset = MTDPART_OFS_APPEND, }, { .name = "yamon env", .size = 0x00040000, - .offset = MTDPART_OFS_APPEND, + .offset = MTDPART_OFS_APPEND, }, }; diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index cf02d7d..19d5642 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -252,7 +252,7 @@ EXPORT_SYMBOL(au1xxx_ddma_del_device); u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, void (*callback)(int, void *), void *callparam) { - unsigned long flags; + unsigned long flags; u32 used, chan; u32 dcp; int i; @@ -512,7 +512,7 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries) break; } - /* If source input is FIFO, set static address. */ + /* If source input is FIFO, set static address. */ if (stp->dev_flags & DEV_FLAGS_IN) { if (stp->dev_flags & DEV_FLAGS_BURSTABLE) src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST); @@ -635,7 +635,7 @@ u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); ctp->chan_ptr->ddma_dbell = 0; - /* Get next descriptor pointer. */ + /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); /* Return something non-zero. */ @@ -697,7 +697,7 @@ u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); ctp->chan_ptr->ddma_dbell = 0; - /* Get next descriptor pointer. */ + /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); /* Return something non-zero. */ @@ -742,7 +742,7 @@ u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes) *nbytes = dp->dscr_cmd1; rv = dp->dscr_stat; - /* Get next descriptor pointer. */ + /* Get next descriptor pointer. */ ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); /* Return something non-zero. */ @@ -891,7 +891,7 @@ void au1xxx_dbdma_dump(u32 chanid) chan_tab_t *ctp; au1x_ddma_desc_t *dp; dbdev_tab_t *stp, *dtp; - au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; u32 i = 0; ctp = *((chan_tab_t **)chanid); @@ -969,7 +969,7 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V; ctp->chan_ptr->ddma_dbell = 0; - /* Get next descriptor pointer. */ + /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); /* Return something non-zero. */ diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c index f1b50f0..f9bc4f5 100644 --- a/arch/mips/alchemy/common/gpiolib.c +++ b/arch/mips/alchemy/common/gpiolib.c @@ -106,14 +106,14 @@ struct gpio_chip alchemy_gpio_chip[] = { .ngpio = ALCHEMY_GPIO1_NUM, }, [1] = { - .label = "alchemy-gpio2", - .direction_input = gpio2_direction_input, - .direction_output = gpio2_direction_output, - .get = gpio2_get, - .set = gpio2_set, + .label = "alchemy-gpio2", + .direction_input = gpio2_direction_input, + .direction_output = gpio2_direction_output, + .get = gpio2_get, + .set = gpio2_set, .to_irq = gpio2_to_irq, - .base = ALCHEMY_GPIO2_BASE, - .ngpio = ALCHEMY_GPIO2_NUM, + .base = ALCHEMY_GPIO2_BASE, + .ngpio = ALCHEMY_GPIO2_NUM, }, }; diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index 94fbcd1..63a7181 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -84,20 +84,20 @@ static int au1300_gpic_settype(struct irq_data *d, unsigned int type); * needs the highest priority. */ struct alchemy_irqmap au1000_irqmap[] __initdata = { - { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, @@ -106,33 +106,33 @@ struct alchemy_irqmap au1000_irqmap[] __initdata = { { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, - { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, - { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, - { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; struct alchemy_irqmap au1500_irqmap[] __initdata = { - { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, - { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, - { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, - { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, - { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, @@ -141,31 +141,31 @@ struct alchemy_irqmap au1500_irqmap[] __initdata = { { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, - { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, - { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, - { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; struct alchemy_irqmap au1100_irqmap[] __initdata = { - { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, @@ -174,33 +174,33 @@ struct alchemy_irqmap au1100_irqmap[] __initdata = { { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, - { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, - { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, - { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; struct alchemy_irqmap au1550_irqmap[] __initdata = { - { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, - { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, - { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, - { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, - { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, - { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, @@ -210,26 +210,26 @@ struct alchemy_irqmap au1550_irqmap[] __initdata = { { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, - { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, - { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, - { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { -1, }, }; struct alchemy_irqmap au1200_irqmap[] __initdata = { - { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, - { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, @@ -239,9 +239,9 @@ struct alchemy_irqmap au1200_irqmap[] __initdata = { { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, - { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, - { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { -1, }, }; diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 7af941d..9837a13 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -53,7 +53,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, .irq = _irq, \ .regshift = 2, \ .iotype = UPIO_AU, \ - .flags = UPF_SKIP_TEST | UPF_IOREMAP | \ + .flags = UPF_SKIP_TEST | UPF_IOREMAP | \ UPF_FIXED_TYPE, \ .type = PORT_16550A, \ .pm = alchemy_8250_pm, \ @@ -137,7 +137,7 @@ static void alchemy_ehci_power_off(struct platform_device *pdev) } static struct usb_ehci_pdata alchemy_ehci_pdata = { - .no_io_watchdog = 1, + .no_io_watchdog = 1, .power_on = alchemy_ehci_power_on, .power_off = alchemy_ehci_power_off, .power_suspend = alchemy_ehci_power_off, diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 37ffd99..62b4e7b 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -59,7 +59,7 @@ void __init plat_mem_setup(void) /* Clear to obtain best system bus performance */ clear_c0_config(1 << 19); /* Clear Config[OD] */ - board_setup(); /* board specific setup */ + board_setup(); /* board specific setup */ /* IO/MEM resources. */ set_io_port_base(0); diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S index c7bcc7e..706d933 100644 --- a/arch/mips/alchemy/common/sleeper.S +++ b/arch/mips/alchemy/common/sleeper.S @@ -102,12 +102,12 @@ LEAF(alchemy_sleep_au1000) cache 0x14, 96(t0) .set mips0 -1: lui a0, 0xb400 /* mem_xxx */ - sw zero, 0x001c(a0) /* Precharge */ +1: lui a0, 0xb400 /* mem_xxx */ + sw zero, 0x001c(a0) /* Precharge */ sync sw zero, 0x0020(a0) /* Auto Refresh */ sync - sw zero, 0x0030(a0) /* Sleep */ + sw zero, 0x0030(a0) /* Sleep */ sync DO_SLEEP @@ -128,15 +128,15 @@ LEAF(alchemy_sleep_au1550) cache 0x14, 96(t0) .set mips0 -1: lui a0, 0xb400 /* mem_xxx */ - sw zero, 0x08c0(a0) /* Precharge */ +1: lui a0, 0xb400 /* mem_xxx */ + sw zero, 0x08c0(a0) /* Precharge */ sync sw zero, 0x08d0(a0) /* Self Refresh */ sync /* wait for sdram to enter self-refresh mode */ - lui t0, 0x0100 -2: lw t1, 0x0850(a0) /* mem_sdstat */ + lui t0, 0x0100 +2: lw t1, 0x0850(a0) /* mem_sdstat */ and t2, t1, t0 beq t2, zero, 2b nop @@ -144,9 +144,9 @@ LEAF(alchemy_sleep_au1550) /* disable SDRAM clocks */ lui t0, 0xcfff ori t0, t0, 0xffff - lw t1, 0x0840(a0) /* mem_sdconfiga */ - and t1, t0, t1 /* clear CE[1:0] */ - sw t1, 0x0840(a0) /* mem_sdconfiga */ + lw t1, 0x0840(a0) /* mem_sdconfiga */ + and t1, t0, t1 /* clear CE[1:0] */ + sw t1, 0x0840(a0) /* mem_sdconfiga */ sync DO_SLEEP diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index b67930d..38afb11 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -85,7 +85,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = { .name = "rtcmatch2", .features = CLOCK_EVT_FEAT_ONESHOT, .rating = 1500, - .set_next_event = au1x_rtcmatch2_set_next_event, + .set_next_event = au1x_rtcmatch2_set_next_event, .set_mode = au1x_rtcmatch2_set_mode, .cpumask = cpu_all_mask, }; diff --git a/arch/mips/alchemy/common/usb.c b/arch/mips/alchemy/common/usb.c index 936af83..fcc6956 100644 --- a/arch/mips/alchemy/common/usb.c +++ b/arch/mips/alchemy/common/usb.c @@ -122,7 +122,7 @@ static inline void __au1300_ohci_control(void __iomem *base, int enable, int id) unsigned long r; if (enable) { - __raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */ + __raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */ wmb(); r = __raw_readl(base + USB_DWC_CTRL3); /* enable OHCI block */ diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c index f2039ef..c98c9ea 100644 --- a/arch/mips/alchemy/devboards/bcsr.c +++ b/arch/mips/alchemy/devboards/bcsr.c @@ -20,7 +20,7 @@ static struct bcsr_reg { spinlock_t lock; } bcsr_regs[BCSR_CNT]; -static void __iomem *bcsr_virt; /* KSEG1 addr of BCSR base */ +static void __iomem *bcsr_virt; /* KSEG1 addr of BCSR base */ static int bcsr_csc_base; /* linux-irq of first cascaded irq */ void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys) diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c index 8187845..11f3ad2 100644 --- a/arch/mips/alchemy/devboards/db1000.c +++ b/arch/mips/alchemy/devboards/db1000.c @@ -276,7 +276,7 @@ static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b) } static struct led_classdev db1100_mmc_led = { - .brightness_set = db1100_mmcled_set, + .brightness_set = db1100_mmcled_set, }; static int db1100_mmc1_card_readonly(void *mmc_host) @@ -314,7 +314,7 @@ static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b) } static struct led_classdev db1100_mmc1_led = { - .brightness_set = db1100_mmc1led_set, + .brightness_set = db1100_mmc1led_set, }; static struct au1xmmc_platform_data db1100_mmc_platdata[2] = { @@ -357,7 +357,7 @@ static struct resource au1100_mmc0_resources[] = { } }; -static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); +static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); static struct platform_device db1100_mmc0_dev = { .name = "au1xxx-mmc", @@ -482,7 +482,7 @@ static struct spi_board_info db1100_spi_info[] __initdata = { .mode = 0, .irq = AU1100_GPIO21_INT, .platform_data = &db1100_touch_pd, - .controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */ + .controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */ }, }; @@ -572,7 +572,7 @@ static int __init db1000_dev_init(void) irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_LOW); irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW); /* EPSON S1D13806 0x1b000000 - * SRAM 1MB/2MB 0x1a000000 + * SRAM 1MB/2MB 0x1a000000 * DS1693 RTC 0x0c000000 */ } else if (board == BCSR_WHOAMI_PB1100) { @@ -586,7 +586,7 @@ static int __init db1000_dev_init(void) irq_set_irq_type(AU1100_GPIO12_INT, IRQ_TYPE_LEVEL_LOW); irq_set_irq_type(AU1100_GPIO13_INT, IRQ_TYPE_LEVEL_LOW); /* EPSON S1D13806 0x1b000000 - * SRAM 1MB/2MB 0x1a000000 + * SRAM 1MB/2MB 0x1a000000 * DiskOnChip 0x0d000000 * DS1693 RTC 0x0c000000 */ @@ -605,7 +605,7 @@ static int __init db1000_dev_init(void) AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, AU1000_PCMCIA_IO_PHYS_ADDR, AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - c0, d0, /*s0*/0, 0, 0); + c0, d0, /*s0*/0, 0, 0); if (twosocks) { irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH); @@ -619,7 +619,7 @@ static int __init db1000_dev_init(void) AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, - c1, d1, /*s1*/0, 0, 1); + c1, d1, /*s1*/0, 0, 1); } platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs)); diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index 299b7d2..a84d98b 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -90,14 +90,14 @@ int __init db1200_board_setup(void) whoami = bcsr_read(BCSR_WHOAMI); printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d" - " Board-ID %d Daughtercard ID %d\n", get_system_type(), + " Board-ID %d Daughtercard ID %d\n", get_system_type(), (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); /* SMBus/SPI on PSC0, Audio on PSC1 */ pfc = __raw_readl((void __iomem *)SYS_PINFUNC); pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); - pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ + pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); wmb(); @@ -129,7 +129,7 @@ int __init db1200_board_setup(void) static struct mtd_partition db1200_spiflash_parts[] = { { .name = "spi_flash", - .offset = 0, + .offset = 0, .size = MTDPART_SIZ_FULL, }, }; @@ -200,12 +200,12 @@ static int au1200_nand_device_ready(struct mtd_info *mtd) static struct mtd_partition db1200_nand_parts[] = { { .name = "NAND FS 0", - .offset = 0, + .offset = 0, .size = 8 * 1024 * 1024, }, { .name = "NAND FS 1", - .offset = MTDPART_OFS_APPEND, + .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL }, }; @@ -395,7 +395,7 @@ static void db1200_mmcled_set(struct led_classdev *led, } static struct led_classdev db1200_mmc_led = { - .brightness_set = db1200_mmcled_set, + .brightness_set = db1200_mmcled_set, }; /* -- */ @@ -463,7 +463,7 @@ static void pb1200_mmc1led_set(struct led_classdev *led, } static struct led_classdev pb1200_mmc1_led = { - .brightness_set = pb1200_mmc1led_set, + .brightness_set = pb1200_mmc1led_set, }; static void pb1200_mmc1_set_power(void *mmc_host, int state) @@ -526,7 +526,7 @@ static struct resource au1200_mmc0_resources[] = { } }; -static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); +static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); static struct platform_device db1200_mmc0_dev = { .name = "au1xxx-mmc", @@ -601,7 +601,7 @@ static int db1200fb_panel_shutdown(void) static struct au1200fb_platdata db1200fb_pd = { .panel_index = db1200fb_panel_index, .panel_init = db1200fb_panel_init, - .panel_shutdown = db1200fb_panel_shutdown, + .panel_shutdown = db1200fb_panel_shutdown, }; static struct resource au1200_lcd_res[] = { @@ -772,11 +772,11 @@ static int __init pb1200_res_fixup(void) } db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR; - db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff; + db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff; db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR; - db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1; + db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1; db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR; - db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff; + db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff; return 0; } @@ -797,7 +797,7 @@ int __init db1200_dev_setup(void) irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW); bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); - /* insert/eject pairs: one of both is always screaming. To avoid + /* insert/eject pairs: one of both is always screaming. To avoid * issues they must not be automatically enabled when initially * requested. */ @@ -813,7 +813,7 @@ int __init db1200_dev_setup(void) spi_register_board_info(db1200_spi_devs, ARRAY_SIZE(db1200_i2c_devs)); - /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) + /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) * or S12 on the PB1200. */ diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c index cdf37cb..6167e73 100644 --- a/arch/mips/alchemy/devboards/db1300.c +++ b/arch/mips/alchemy/devboards/db1300.c @@ -80,7 +80,7 @@ static int db1300_dev_pins[] __initdata = { AU1300_PIN_PSC0D1, AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, AU1300_PIN_PSC1D1, - AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0, + AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0, AU1300_PIN_PSC2D1, AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, AU1300_PIN_PSC3D1, @@ -143,12 +143,12 @@ static int au1300_nand_device_ready(struct mtd_info *mtd) static struct mtd_partition db1300_nand_parts[] = { { .name = "NAND FS 0", - .offset = 0, + .offset = 0, .size = 8 * 1024 * 1024, }, { .name = "NAND FS 1", - .offset = MTDPART_OFS_APPEND, + .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL }, }; @@ -487,7 +487,7 @@ static void db1300_mmcled_set(struct led_classdev *led, } static struct led_classdev db1300_mmc_led = { - .brightness_set = db1300_mmcled_set, + .brightness_set = db1300_mmcled_set, }; struct au1xmmc_platform_data db1300_sd1_platdata = { @@ -646,7 +646,7 @@ static int db1300fb_panel_shutdown(void) static struct au1200fb_platdata db1300fb_pd = { .panel_index = db1300fb_panel_index, .panel_init = db1300fb_panel_init, - .panel_shutdown = db1300fb_panel_shutdown, + .panel_shutdown = db1300fb_panel_shutdown, }; static struct resource au1300_lcd_res[] = { diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c index 5a9ae60..016cdda 100644 --- a/arch/mips/alchemy/devboards/db1550.c +++ b/arch/mips/alchemy/devboards/db1550.c @@ -67,7 +67,7 @@ int __init db1550_board_setup(void) bcsr_init(PB1550_BCSR_PHYS_ADDR, PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); - pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d " \ + pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d " \ "Daughtercard ID %d\n", get_system_type(), (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); @@ -80,7 +80,7 @@ int __init db1550_board_setup(void) static struct mtd_partition db1550_spiflash_parts[] = { { .name = "spi_flash", - .offset = 0, + .offset = 0, .size = MTDPART_SIZ_FULL, }, }; @@ -151,12 +151,12 @@ static int au1550_nand_device_ready(struct mtd_info *mtd) static struct mtd_partition db1550_nand_parts[] = { { .name = "NAND FS 0", - .offset = 0, + .offset = 0, .size = 8 * 1024 * 1024, }, { .name = "NAND FS 1", - .offset = MTDPART_OFS_APPEND, + .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL }, }; @@ -495,10 +495,10 @@ static void __init db1550_devices(void) { alchemy_gpio_direction_output(203, 0); /* red led on */ - irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH); /* CD0# */ - irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH); /* CD1# */ - irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW); /* CARD0# */ - irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW); /* CARD1# */ + irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH); /* CD0# */ + irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH); /* CD1# */ + irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW); /* CARD0# */ + irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW); /* CARD1# */ irq_set_irq_type(AU1550_GPIO21_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG0# */ irq_set_irq_type(AU1550_GPIO22_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG1# */ @@ -539,7 +539,7 @@ static void __init pb1550_devices(void) /* Pb1550, like all others, also has statuschange irqs; however they're * wired up on one of the Au1550's shared GPIO201_205 line, which also - * services the PCMCIA card interrupts. So we ignore statuschange and + * services the PCMCIA card interrupts. So we ignore statuschange and * use the GPIO201_205 exclusively for card interrupts, since a) pcmcia * drivers are used to shared irqs and b) statuschange isn't really use- * ful anyway. diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c index acaf91b..b86bff3 100644 --- a/arch/mips/alchemy/devboards/pm.c +++ b/arch/mips/alchemy/devboards/pm.c @@ -194,7 +194,7 @@ static ssize_t db1x_pmattr_store(struct kobject *kobj, } #define ATTR(x) \ - static struct kobj_attribute x##_attribute = \ + static struct kobj_attribute x##_attribute = \ __ATTR(x, 0664, db1x_pmattr_show, \ db1x_pmattr_store); diff --git a/arch/mips/ar7/Platform b/arch/mips/ar7/Platform index 0bf85c4..21f9102 100644 --- a/arch/mips/ar7/Platform +++ b/arch/mips/ar7/Platform @@ -1,6 +1,6 @@ # # Texas Instruments AR7 # -platform-$(CONFIG_AR7) += ar7/ -cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7 -load-$(CONFIG_AR7) += 0xffffffff94100000 +platform-$(CONFIG_AR7) += ar7/ +cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7 +load-$(CONFIG_AR7) += 0xffffffff94100000 diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 7477fd21..7e2356f 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -492,11 +492,11 @@ static struct gpio_led gt701_leds[] = { .active_low = 1, .default_trigger = "default-on", }, - { - .name = "ethernet", - .gpio = 10, - .active_low = 1, - }, + { + .name = "ethernet", + .gpio = 10, + .active_low = 1, + }, }; static struct gpio_led_platform_data ar7_led_data; @@ -512,7 +512,7 @@ static void __init detect_leds(void) { char *prid, *usb_prod; - /* Default LEDs */ + /* Default LEDs */ ar7_led_data.num_leds = ARRAY_SIZE(default_leds); ar7_led_data.leds = default_leds; diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig index f44feee..3995e31 100644 --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -14,6 +14,18 @@ config ATH79_MACH_AP121 Say 'Y' here if you want your kernel to support the Atheros AP121 reference board. +config ATH79_MACH_AP136 + bool "Atheros AP136 reference board" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Atheros AP136 reference board. + config ATH79_MACH_AP81 bool "Atheros AP81 reference board" select SOC_AR913X @@ -88,6 +100,12 @@ config SOC_AR934X select PCI_AR724X if PCI def_bool n +config SOC_QCA955X + select USB_ARCH_HAS_EHCI + select HW_HAS_PCI + select PCI_AR724X if PCI + def_bool n + config PCI_AR724X def_bool n @@ -104,7 +122,7 @@ config ATH79_DEV_USB def_bool n config ATH79_DEV_WMAC - depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X) + depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) def_bool n endif diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile index 2b54d98..5c9ff69 100644 --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o # Machines # obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o +obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c index 579f452..765ef30 100644 --- a/arch/mips/ath79/clock.c +++ b/arch/mips/ath79/clock.c @@ -198,7 +198,7 @@ static void __init ar934x_clocks_init(void) dpll_base = ioremap(AR934X_SRIF_BASE, AR934X_SRIF_SIZE); bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); - if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40) + if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40) ath79_ref_clk.rate = 40 * 1000 * 1000; else ath79_ref_clk.rate = 25 * 1000 * 1000; @@ -295,6 +295,82 @@ static void __init ar934x_clocks_init(void) iounmap(dpll_base); } +static void __init qca955x_clocks_init(void) +{ + u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; + u32 cpu_pll, ddr_pll; + u32 bootstrap; + + bootstrap = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP); + if (bootstrap & QCA955X_BOOTSTRAP_REF_CLK_40) + ath79_ref_clk.rate = 40 * 1000 * 1000; + else + ath79_ref_clk.rate = 25 * 1000 * 1000; + + pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG); + out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK; + ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) & + QCA955X_PLL_CPU_CONFIG_REFDIV_MASK; + nint = (pll >> QCA955X_PLL_CPU_CONFIG_NINT_SHIFT) & + QCA955X_PLL_CPU_CONFIG_NINT_MASK; + frac = (pll >> QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT) & + QCA955X_PLL_CPU_CONFIG_NFRAC_MASK; + + cpu_pll = nint * ath79_ref_clk.rate / ref_div; + cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6)); + cpu_pll /= (1 << out_div); + + pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG); + out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & + QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK; + ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) & + QCA955X_PLL_DDR_CONFIG_REFDIV_MASK; + nint = (pll >> QCA955X_PLL_DDR_CONFIG_NINT_SHIFT) & + QCA955X_PLL_DDR_CONFIG_NINT_MASK; + frac = (pll >> QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT) & + QCA955X_PLL_DDR_CONFIG_NFRAC_MASK; + + ddr_pll = nint * ath79_ref_clk.rate / ref_div; + ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10)); + ddr_pll /= (1 << out_div); + + clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG); + + postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & + QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; + + if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS) + ath79_cpu_clk.rate = ath79_ref_clk.rate; + else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL) + ath79_cpu_clk.rate = ddr_pll / (postdiv + 1); + else + ath79_cpu_clk.rate = cpu_pll / (postdiv + 1); + + postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & + QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; + + if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS) + ath79_ddr_clk.rate = ath79_ref_clk.rate; + else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL) + ath79_ddr_clk.rate = cpu_pll / (postdiv + 1); + else + ath79_ddr_clk.rate = ddr_pll / (postdiv + 1); + + postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & + QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; + + if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS) + ath79_ahb_clk.rate = ath79_ref_clk.rate; + else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) + ath79_ahb_clk.rate = ddr_pll / (postdiv + 1); + else + ath79_ahb_clk.rate = cpu_pll / (postdiv + 1); + + ath79_wdt_clk.rate = ath79_ref_clk.rate; + ath79_uart_clk.rate = ath79_ref_clk.rate; +} + void __init ath79_clocks_init(void) { if (soc_is_ar71xx()) @@ -307,6 +383,8 @@ void __init ath79_clocks_init(void) ar933x_clocks_init(); else if (soc_is_ar934x()) ar934x_clocks_init(); + else if (soc_is_qca955x()) + qca955x_clocks_init(); else BUG(); diff --git a/arch/mips/ath79/common.c b/arch/mips/ath79/common.c index 5a4adfc..eb3966c 100644 --- a/arch/mips/ath79/common.c +++ b/arch/mips/ath79/common.c @@ -72,6 +72,8 @@ void ath79_device_reset_set(u32 mask) reg = AR933X_RESET_REG_RESET_MODULE; else if (soc_is_ar934x()) reg = AR934X_RESET_REG_RESET_MODULE; + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; else BUG(); @@ -98,6 +100,8 @@ void ath79_device_reset_clear(u32 mask) reg = AR933X_RESET_REG_RESET_MODULE; else if (soc_is_ar934x()) reg = AR934X_RESET_REG_RESET_MODULE; + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; else BUG(); diff --git a/arch/mips/ath79/dev-common.c b/arch/mips/ath79/dev-common.c index ea3a814..a3a2741 100644 --- a/arch/mips/ath79/dev-common.c +++ b/arch/mips/ath79/dev-common.c @@ -36,7 +36,7 @@ static struct resource ath79_uart_resources[] = { static struct plat_serial8250_port ath79_uart_data[] = { { .mapbase = AR71XX_UART_BASE, - .irq = ATH79_MISC_IRQ_UART, + .irq = ATH79_MISC_IRQ(3), .flags = AR71XX_UART_FLAGS, .iotype = UPIO_MEM32, .regshift = 2, @@ -62,8 +62,8 @@ static struct resource ar933x_uart_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = ATH79_MISC_IRQ_UART, - .end = ATH79_MISC_IRQ_UART, + .start = ATH79_MISC_IRQ(3), + .end = ATH79_MISC_IRQ(3), .flags = IORESOURCE_IRQ, }, }; @@ -90,7 +90,8 @@ void __init ath79_register_uart(void) if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x() || - soc_is_ar934x()) { + soc_is_ar934x() || + soc_is_qca955x()) { ath79_uart_data[0].uartclk = clk_get_rate(clk); platform_device_register(&ath79_uart_device); } else if (soc_is_ar933x()) { diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c index bd2bc10..8227265 100644 --- a/arch/mips/ath79/dev-usb.c +++ b/arch/mips/ath79/dev-usb.c @@ -25,29 +25,11 @@ #include "common.h" #include "dev-usb.h" -static struct resource ath79_ohci_resources[2]; - -static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32); +static u64 ath79_usb_dmamask = DMA_BIT_MASK(32); static struct usb_ohci_pdata ath79_ohci_pdata = { }; -static struct platform_device ath79_ohci_device = { - .name = "ohci-platform", - .id = -1, - .resource = ath79_ohci_resources, - .num_resources = ARRAY_SIZE(ath79_ohci_resources), - .dev = { - .dma_mask = &ath79_ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ath79_ohci_pdata, - }, -}; - -static struct resource ath79_ehci_resources[2]; - -static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32); - static struct usb_ehci_pdata ath79_ehci_pdata_v1 = { .has_synopsys_hc_bug = 1, }; @@ -57,22 +39,16 @@ static struct usb_ehci_pdata ath79_ehci_pdata_v2 = { .has_tt = 1, }; -static struct platform_device ath79_ehci_device = { - .name = "ehci-platform", - .id = -1, - .resource = ath79_ehci_resources, - .num_resources = ARRAY_SIZE(ath79_ehci_resources), - .dev = { - .dma_mask = &ath79_ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static void __init ath79_usb_init_resource(struct resource res[2], - unsigned long base, - unsigned long size, - int irq) +static void __init ath79_usb_register(const char *name, int id, + unsigned long base, unsigned long size, + int irq, const void *data, + size_t data_size) { + struct resource res[2]; + struct platform_device *pdev; + + memset(res, 0, sizeof(res)); + res[0].flags = IORESOURCE_MEM; res[0].start = base; res[0].end = base + size - 1; @@ -80,6 +56,19 @@ static void __init ath79_usb_init_resource(struct resource res[2], res[1].flags = IORESOURCE_IRQ; res[1].start = irq; res[1].end = irq; + + pdev = platform_device_register_resndata(NULL, name, id, + res, ARRAY_SIZE(res), + data, data_size); + + if (IS_ERR(pdev)) { + pr_err("ath79: unable to register USB at %08lx, err=%d\n", + base, (int) PTR_ERR(pdev)); + return; + } + + pdev->dev.dma_mask = &ath79_usb_dmamask; + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); } #define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \ @@ -106,14 +95,15 @@ static void __init ath79_usb_setup(void) mdelay(900); - ath79_usb_init_resource(ath79_ohci_resources, AR71XX_OHCI_BASE, - AR71XX_OHCI_SIZE, ATH79_MISC_IRQ_OHCI); - platform_device_register(&ath79_ohci_device); + ath79_usb_register("ohci-platform", -1, + AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE, + ATH79_MISC_IRQ(6), + &ath79_ohci_pdata, sizeof(ath79_ohci_pdata)); - ath79_usb_init_resource(ath79_ehci_resources, AR71XX_EHCI_BASE, - AR71XX_EHCI_SIZE, ATH79_CPU_IRQ_USB); - ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1; - platform_device_register(&ath79_ehci_device); + ath79_usb_register("ehci-platform", -1, + AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE, + ATH79_CPU_IRQ(3), + &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1)); } static void __init ar7240_usb_setup(void) @@ -135,9 +125,10 @@ static void __init ar7240_usb_setup(void) iounmap(usb_ctrl_base); - ath79_usb_init_resource(ath79_ohci_resources, AR7240_OHCI_BASE, - AR7240_OHCI_SIZE, ATH79_CPU_IRQ_USB); - platform_device_register(&ath79_ohci_device); + ath79_usb_register("ohci-platform", -1, + AR7240_OHCI_BASE, AR7240_OHCI_SIZE, + ATH79_CPU_IRQ(3), + &ath79_ohci_pdata, sizeof(ath79_ohci_pdata)); } static void __init ar724x_usb_setup(void) @@ -151,10 +142,10 @@ static void __init ar724x_usb_setup(void) ath79_device_reset_clear(AR724X_RESET_USB_PHY); mdelay(10); - ath79_usb_init_resource(ath79_ehci_resources, AR724X_EHCI_BASE, - AR724X_EHCI_SIZE, ATH79_CPU_IRQ_USB); - ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; - platform_device_register(&ath79_ehci_device); + ath79_usb_register("ehci-platform", -1, + AR724X_EHCI_BASE, AR724X_EHCI_SIZE, + ATH79_CPU_IRQ(3), + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); } static void __init ar913x_usb_setup(void) @@ -168,10 +159,10 @@ static void __init ar913x_usb_setup(void) ath79_device_reset_clear(AR913X_RESET_USB_PHY); mdelay(10); - ath79_usb_init_resource(ath79_ehci_resources, AR913X_EHCI_BASE, - AR913X_EHCI_SIZE, ATH79_CPU_IRQ_USB); - ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; - platform_device_register(&ath79_ehci_device); + ath79_usb_register("ehci-platform", -1, + AR913X_EHCI_BASE, AR913X_EHCI_SIZE, + ATH79_CPU_IRQ(3), + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); } static void __init ar933x_usb_setup(void) @@ -185,10 +176,10 @@ static void __init ar933x_usb_setup(void) ath79_device_reset_clear(AR933X_RESET_USB_PHY); mdelay(10); - ath79_usb_init_resource(ath79_ehci_resources, AR933X_EHCI_BASE, - AR933X_EHCI_SIZE, ATH79_CPU_IRQ_USB); - ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; - platform_device_register(&ath79_ehci_device); + ath79_usb_register("ehci-platform", -1, + AR933X_EHCI_BASE, AR933X_EHCI_SIZE, + ATH79_CPU_IRQ(3), + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); } static void __init ar934x_usb_setup(void) @@ -211,10 +202,23 @@ static void __init ar934x_usb_setup(void) ath79_device_reset_clear(AR934X_RESET_USB_HOST); udelay(1000); - ath79_usb_init_resource(ath79_ehci_resources, AR934X_EHCI_BASE, - AR934X_EHCI_SIZE, ATH79_CPU_IRQ_USB); - ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2; - platform_device_register(&ath79_ehci_device); + ath79_usb_register("ehci-platform", -1, + AR934X_EHCI_BASE, AR934X_EHCI_SIZE, + ATH79_CPU_IRQ(3), + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); +} + +static void __init qca955x_usb_setup(void) +{ + ath79_usb_register("ehci-platform", 0, + QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, + ATH79_IP3_IRQ(0), + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); + + ath79_usb_register("ehci-platform", 1, + QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE, + ATH79_IP3_IRQ(1), + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); } void __init ath79_register_usb(void) @@ -231,6 +235,8 @@ void __init ath79_register_usb(void) ar933x_usb_setup(); else if (soc_is_ar934x()) ar934x_usb_setup(); + else if (soc_is_qca955x()) + qca955x_usb_setup(); else BUG(); } diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c index d6d893c..da190b1 100644 --- a/arch/mips/ath79/dev-wmac.c +++ b/arch/mips/ath79/dev-wmac.c @@ -55,8 +55,8 @@ static void __init ar913x_wmac_setup(void) ath79_wmac_resources[0].start = AR913X_WMAC_BASE; ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; - ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2; - ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2; + ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); + ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); } @@ -83,8 +83,8 @@ static void __init ar933x_wmac_setup(void) ath79_wmac_resources[0].start = AR933X_WMAC_BASE; ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; - ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2; - ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2; + ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); + ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); if (t & AR933X_BOOTSTRAP_REF_CLK_40) @@ -107,7 +107,7 @@ static void ar934x_wmac_setup(void) ath79_wmac_resources[0].start = AR934X_WMAC_BASE; ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1; ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); - ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); + ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); if (t & AR934X_BOOTSTRAP_REF_CLK_40) @@ -116,6 +116,24 @@ static void ar934x_wmac_setup(void) ath79_wmac_data.is_clk_25mhz = true; } +static void qca955x_wmac_setup(void) +{ + u32 t; + + ath79_wmac_device.name = "qca955x_wmac"; + + ath79_wmac_resources[0].start = QCA955X_WMAC_BASE; + ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1; + ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); + ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); + + t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP); + if (t & QCA955X_BOOTSTRAP_REF_CLK_40) + ath79_wmac_data.is_clk_25mhz = false; + else + ath79_wmac_data.is_clk_25mhz = true; +} + void __init ath79_register_wmac(u8 *cal_data) { if (soc_is_ar913x()) @@ -124,6 +142,8 @@ void __init ath79_register_wmac(u8 *cal_data) ar933x_wmac_setup(); else if (soc_is_ar934x()) ar934x_wmac_setup(); + else if (soc_is_qca955x()) + qca955x_wmac_setup(); else BUG(); diff --git a/arch/mips/ath79/early_printk.c b/arch/mips/ath79/early_printk.c index dc938cb..b955faf 100644 --- a/arch/mips/ath79/early_printk.c +++ b/arch/mips/ath79/early_printk.c @@ -74,6 +74,8 @@ static void prom_putchar_init(void) case REV_ID_MAJOR_AR9341: case REV_ID_MAJOR_AR9342: case REV_ID_MAJOR_AR9344: + case REV_ID_MAJOR_QCA9556: + case REV_ID_MAJOR_QCA9558: _prom_putchar = prom_putchar_ar71xx; break; diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c index 48fe762..8d025b0 100644 --- a/arch/mips/ath79/gpio.c +++ b/arch/mips/ath79/gpio.c @@ -137,49 +137,45 @@ static struct gpio_chip ath79_gpio_chip = { .base = 0, }; -void ath79_gpio_function_enable(u32 mask) +static void __iomem *ath79_gpio_get_function_reg(void) { - void __iomem *base = ath79_gpio_base; - unsigned long flags; + u32 reg = 0; - spin_lock_irqsave(&ath79_gpio_lock, flags); - - __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) | mask, - base + AR71XX_GPIO_REG_FUNC); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_FUNC); + if (soc_is_ar71xx() || + soc_is_ar724x() || + soc_is_ar913x() || + soc_is_ar933x()) + reg = AR71XX_GPIO_REG_FUNC; + else if (soc_is_ar934x()) + reg = AR934X_GPIO_REG_FUNC; + else + BUG(); - spin_unlock_irqrestore(&ath79_gpio_lock, flags); + return ath79_gpio_base + reg; } -void ath79_gpio_function_disable(u32 mask) +void ath79_gpio_function_setup(u32 set, u32 clear) { - void __iomem *base = ath79_gpio_base; + void __iomem *reg = ath79_gpio_get_function_reg(); unsigned long flags; spin_lock_irqsave(&ath79_gpio_lock, flags); - __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~mask, - base + AR71XX_GPIO_REG_FUNC); + __raw_writel((__raw_readl(reg) & ~clear) | set, reg); /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_FUNC); + __raw_readl(reg); spin_unlock_irqrestore(&ath79_gpio_lock, flags); } -void ath79_gpio_function_setup(u32 set, u32 clear) +void ath79_gpio_function_enable(u32 mask) { - void __iomem *base = ath79_gpio_base; - unsigned long flags; - - spin_lock_irqsave(&ath79_gpio_lock, flags); - - __raw_writel((__raw_readl(base + AR71XX_GPIO_REG_FUNC) & ~clear) | set, - base + AR71XX_GPIO_REG_FUNC); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_FUNC); + ath79_gpio_function_setup(mask, 0); +} - spin_unlock_irqrestore(&ath79_gpio_lock, flags); +void ath79_gpio_function_disable(u32 mask) +{ + ath79_gpio_function_setup(0, mask); } void __init ath79_gpio_init(void) @@ -198,12 +194,14 @@ void __init ath79_gpio_init(void) ath79_gpio_count = AR933X_GPIO_COUNT; else if (soc_is_ar934x()) ath79_gpio_count = AR934X_GPIO_COUNT; + else if (soc_is_qca955x()) + ath79_gpio_count = QCA955X_GPIO_COUNT; else BUG(); ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); ath79_gpio_chip.ngpio = ath79_gpio_count; - if (soc_is_ar934x()) { + if (soc_is_ar934x() || soc_is_qca955x()) { ath79_gpio_chip.direction_input = ar934x_gpio_direction_input; ath79_gpio_chip.direction_output = ar934x_gpio_direction_output; } diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c index 90d09fc..9c0e176 100644 --- a/arch/mips/ath79/irq.c +++ b/arch/mips/ath79/irq.c @@ -35,44 +35,17 @@ static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc) pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) & __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); - if (pending & MISC_INT_UART) - generic_handle_irq(ATH79_MISC_IRQ_UART); - - else if (pending & MISC_INT_DMA) - generic_handle_irq(ATH79_MISC_IRQ_DMA); - - else if (pending & MISC_INT_PERFC) - generic_handle_irq(ATH79_MISC_IRQ_PERFC); - - else if (pending & MISC_INT_TIMER) - generic_handle_irq(ATH79_MISC_IRQ_TIMER); - - else if (pending & MISC_INT_TIMER2) - generic_handle_irq(ATH79_MISC_IRQ_TIMER2); - - else if (pending & MISC_INT_TIMER3) - generic_handle_irq(ATH79_MISC_IRQ_TIMER3); - - else if (pending & MISC_INT_TIMER4) - generic_handle_irq(ATH79_MISC_IRQ_TIMER4); - - else if (pending & MISC_INT_OHCI) - generic_handle_irq(ATH79_MISC_IRQ_OHCI); - - else if (pending & MISC_INT_ERROR) - generic_handle_irq(ATH79_MISC_IRQ_ERROR); - - else if (pending & MISC_INT_GPIO) - generic_handle_irq(ATH79_MISC_IRQ_GPIO); - - else if (pending & MISC_INT_WDOG) - generic_handle_irq(ATH79_MISC_IRQ_WDOG); + if (!pending) { + spurious_interrupt(); + return; + } - else if (pending & MISC_INT_ETHSW) - generic_handle_irq(ATH79_MISC_IRQ_ETHSW); + while (pending) { + int bit = __ffs(pending); - else - spurious_interrupt(); + generic_handle_irq(ATH79_MISC_IRQ(bit)); + pending &= ~BIT(bit); + } } static void ar71xx_misc_irq_unmask(struct irq_data *d) @@ -130,7 +103,10 @@ static void __init ath79_misc_irq_init(void) if (soc_is_ar71xx() || soc_is_ar913x()) ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask; - else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x()) + else if (soc_is_ar724x() || + soc_is_ar933x() || + soc_is_ar934x() || + soc_is_qca955x()) ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; else BUG(); @@ -141,7 +117,7 @@ static void __init ath79_misc_irq_init(void) handle_level_irq); } - irq_set_chained_handler(ATH79_CPU_IRQ_MISC, ath79_misc_irq_handler); + irq_set_chained_handler(ATH79_CPU_IRQ(6), ath79_misc_irq_handler); } static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc) @@ -174,7 +150,89 @@ static void ar934x_ip2_irq_init(void) irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); - irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch); + irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); +} + +static void qca955x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc) +{ + u32 status; + + disable_irq_nosync(irq); + + status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); + status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL; + + if (status == 0) { + spurious_interrupt(); + goto enable; + } + + if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) { + /* TODO: flush DDR? */ + generic_handle_irq(ATH79_IP2_IRQ(0)); + } + + if (status & QCA955X_EXT_INT_WMAC_ALL) { + /* TODO: flush DDR? */ + generic_handle_irq(ATH79_IP2_IRQ(1)); + } + +enable: + enable_irq(irq); +} + +static void qca955x_ip3_irq_dispatch(unsigned int irq, struct irq_desc *desc) +{ + u32 status; + + disable_irq_nosync(irq); + + status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); + status &= QCA955X_EXT_INT_PCIE_RC2_ALL | + QCA955X_EXT_INT_USB1 | + QCA955X_EXT_INT_USB2; + + if (status == 0) { + spurious_interrupt(); + goto enable; + } + + if (status & QCA955X_EXT_INT_USB1) { + /* TODO: flush DDR? */ + generic_handle_irq(ATH79_IP3_IRQ(0)); + } + + if (status & QCA955X_EXT_INT_USB2) { + /* TODO: flush DDR? */ + generic_handle_irq(ATH79_IP3_IRQ(1)); + } + + if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) { + /* TODO: flush DDR? */ + generic_handle_irq(ATH79_IP3_IRQ(2)); + } + +enable: + enable_irq(irq); +} + +static void qca955x_irq_init(void) +{ + int i; + + for (i = ATH79_IP2_IRQ_BASE; + i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &dummy_irq_chip, + handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch); + + for (i = ATH79_IP3_IRQ_BASE; + i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &dummy_irq_chip, + handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); } asmlinkage void plat_irq_dispatch(void) @@ -184,22 +242,22 @@ asmlinkage void plat_irq_dispatch(void) pending = read_c0_status() & read_c0_cause() & ST0_IM; if (pending & STATUSF_IP7) - do_IRQ(ATH79_CPU_IRQ_TIMER); + do_IRQ(ATH79_CPU_IRQ(7)); else if (pending & STATUSF_IP2) ath79_ip2_handler(); else if (pending & STATUSF_IP4) - do_IRQ(ATH79_CPU_IRQ_GE0); + do_IRQ(ATH79_CPU_IRQ(4)); else if (pending & STATUSF_IP5) - do_IRQ(ATH79_CPU_IRQ_GE1); + do_IRQ(ATH79_CPU_IRQ(5)); else if (pending & STATUSF_IP3) ath79_ip3_handler(); else if (pending & STATUSF_IP6) - do_IRQ(ATH79_CPU_IRQ_MISC); + do_IRQ(ATH79_CPU_IRQ(6)); else spurious_interrupt(); @@ -212,63 +270,69 @@ asmlinkage void plat_irq_dispatch(void) * Issue a flush in the handlers to ensure that the driver sees * the update. */ + +static void ath79_default_ip2_handler(void) +{ + do_IRQ(ATH79_CPU_IRQ(2)); +} + +static void ath79_default_ip3_handler(void) +{ + do_IRQ(ATH79_CPU_IRQ(3)); +} + static void ar71xx_ip2_handler(void) { ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI); - do_IRQ(ATH79_CPU_IRQ_IP2); + do_IRQ(ATH79_CPU_IRQ(2)); } static void ar724x_ip2_handler(void) { ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE); - do_IRQ(ATH79_CPU_IRQ_IP2); + do_IRQ(ATH79_CPU_IRQ(2)); } static void ar913x_ip2_handler(void) { ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC); - do_IRQ(ATH79_CPU_IRQ_IP2); + do_IRQ(ATH79_CPU_IRQ(2)); } static void ar933x_ip2_handler(void) { ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC); - do_IRQ(ATH79_CPU_IRQ_IP2); -} - -static void ar934x_ip2_handler(void) -{ - do_IRQ(ATH79_CPU_IRQ_IP2); + do_IRQ(ATH79_CPU_IRQ(2)); } static void ar71xx_ip3_handler(void) { ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB); - do_IRQ(ATH79_CPU_IRQ_USB); + do_IRQ(ATH79_CPU_IRQ(3)); } static void ar724x_ip3_handler(void) { ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB); - do_IRQ(ATH79_CPU_IRQ_USB); + do_IRQ(ATH79_CPU_IRQ(3)); } static void ar913x_ip3_handler(void) { ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB); - do_IRQ(ATH79_CPU_IRQ_USB); + do_IRQ(ATH79_CPU_IRQ(3)); } static void ar933x_ip3_handler(void) { ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB); - do_IRQ(ATH79_CPU_IRQ_USB); + do_IRQ(ATH79_CPU_IRQ(3)); } static void ar934x_ip3_handler(void) { ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB); - do_IRQ(ATH79_CPU_IRQ_USB); + do_IRQ(ATH79_CPU_IRQ(3)); } void __init arch_init_irq(void) @@ -286,16 +350,21 @@ void __init arch_init_irq(void) ath79_ip2_handler = ar933x_ip2_handler; ath79_ip3_handler = ar933x_ip3_handler; } else if (soc_is_ar934x()) { - ath79_ip2_handler = ar934x_ip2_handler; + ath79_ip2_handler = ath79_default_ip2_handler; ath79_ip3_handler = ar934x_ip3_handler; + } else if (soc_is_qca955x()) { + ath79_ip2_handler = ath79_default_ip2_handler; + ath79_ip3_handler = ath79_default_ip3_handler; } else { BUG(); } - cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC; + cp0_perfcount_irq = ATH79_MISC_IRQ(5); mips_cpu_irq_init(); ath79_misc_irq_init(); if (soc_is_ar934x()) ar934x_ip2_irq_init(); + else if (soc_is_qca955x()) + qca955x_irq_init(); } diff --git a/arch/mips/ath79/mach-ap121.c b/arch/mips/ath79/mach-ap121.c index 4c20200..1bf73f2 100644 --- a/arch/mips/ath79/mach-ap121.c +++ b/arch/mips/ath79/mach-ap121.c @@ -69,7 +69,7 @@ static struct spi_board_info ap121_spi_info[] = { static struct ath79_spi_platform_data ap121_spi_data = { .bus_num = 0, - .num_chipselect = 1, + .num_chipselect = 1, }; static void __init ap121_setup(void) diff --git a/arch/mips/ath79/mach-ap136.c b/arch/mips/ath79/mach-ap136.c new file mode 100644 index 0000000..479dd4b --- /dev/null +++ b/arch/mips/ath79/mach-ap136.c @@ -0,0 +1,156 @@ +/* + * Qualcomm Atheros AP136 reference board support + * + * Copyright (c) 2012 Qualcomm Atheros + * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/pci.h> +#include <linux/ath9k_platform.h> + +#include "machtypes.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "pci.h" + +#define AP136_GPIO_LED_STATUS_RED 14 +#define AP136_GPIO_LED_STATUS_GREEN 19 +#define AP136_GPIO_LED_USB 4 +#define AP136_GPIO_LED_WLAN_2G 13 +#define AP136_GPIO_LED_WLAN_5G 12 +#define AP136_GPIO_LED_WPS_RED 15 +#define AP136_GPIO_LED_WPS_GREEN 20 + +#define AP136_GPIO_BTN_WPS 16 +#define AP136_GPIO_BTN_RFKILL 21 + +#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) + +#define AP136_WMAC_CALDATA_OFFSET 0x1000 +#define AP136_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led ap136_leds_gpio[] __initdata = { + { + .name = "qca:green:status", + .gpio = AP136_GPIO_LED_STATUS_GREEN, + .active_low = 1, + }, + { + .name = "qca:red:status", + .gpio = AP136_GPIO_LED_STATUS_RED, + .active_low = 1, + }, + { + .name = "qca:green:wps", + .gpio = AP136_GPIO_LED_WPS_GREEN, + .active_low = 1, + }, + { + .name = "qca:red:wps", + .gpio = AP136_GPIO_LED_WPS_RED, + .active_low = 1, + }, + { + .name = "qca:red:wlan-2g", + .gpio = AP136_GPIO_LED_WLAN_2G, + .active_low = 1, + }, + { + .name = "qca:red:usb", + .gpio = AP136_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_keys_button ap136_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP136_GPIO_BTN_WPS, + .active_low = 1, + }, + { + .desc = "RFKILL button", + .type = EV_KEY, + .code = KEY_RFKILL, + .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP136_GPIO_BTN_RFKILL, + .active_low = 1, + }, +}; + +static struct spi_board_info ap136_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "mx25l6405d", + } +}; + +static struct ath79_spi_platform_data ap136_spi_data = { + .bus_num = 0, + .num_chipselect = 1, +}; + +#ifdef CONFIG_PCI +static struct ath9k_platform_data ap136_ath9k_data; + +static int ap136_pci_plat_dev_init(struct pci_dev *dev) +{ + if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) + dev->dev.platform_data = &ap136_ath9k_data; + + return 0; +} + +static void __init ap136_pci_init(u8 *eeprom) +{ + memcpy(ap136_ath9k_data.eeprom_data, eeprom, + sizeof(ap136_ath9k_data.eeprom_data)); + + ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); + ath79_register_pci(); +} +#else +static inline void ap136_pci_init(void) {} +#endif /* CONFIG_PCI */ + +static void __init ap136_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), + ap136_leds_gpio); + ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap136_gpio_keys), + ap136_gpio_keys); + ath79_register_spi(&ap136_spi_data, ap136_spi_info, + ARRAY_SIZE(ap136_spi_info)); + ath79_register_usb(); + ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); + ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); +} + +MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", + "Atheros AP136-010 reference board", + ap136_setup); diff --git a/arch/mips/ath79/mach-ap81.c b/arch/mips/ath79/mach-ap81.c index abe1983..1c78d49 100644 --- a/arch/mips/ath79/mach-ap81.c +++ b/arch/mips/ath79/mach-ap81.c @@ -78,7 +78,7 @@ static struct spi_board_info ap81_spi_info[] = { static struct ath79_spi_platform_data ap81_spi_data = { .bus_num = 0, - .num_chipselect = 1, + .num_chipselect = 1, }; static void __init ap81_setup(void) diff --git a/arch/mips/ath79/mach-db120.c b/arch/mips/ath79/mach-db120.c index 42f540a..4d661a1 100644 --- a/arch/mips/ath79/mach-db120.c +++ b/arch/mips/ath79/mach-db120.c @@ -87,7 +87,7 @@ static struct spi_board_info db120_spi_info[] = { static struct ath79_spi_platform_data db120_spi_data = { .bus_num = 0, - .num_chipselect = 1, + .num_chipselect = 1, }; #ifdef CONFIG_PCI diff --git a/arch/mips/ath79/mach-pb44.c b/arch/mips/ath79/mach-pb44.c index c5f0ea5..67b980d 100644 --- a/arch/mips/ath79/mach-pb44.c +++ b/arch/mips/ath79/mach-pb44.c @@ -34,8 +34,8 @@ #define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL) static struct i2c_gpio_platform_data pb44_i2c_gpio_data = { - .sda_pin = PB44_GPIO_I2C_SDA, - .scl_pin = PB44_GPIO_I2C_SCL, + .sda_pin = PB44_GPIO_I2C_SDA, + .scl_pin = PB44_GPIO_I2C_SCL, }; static struct platform_device pb44_i2c_gpio_device = { @@ -53,7 +53,7 @@ static struct pcf857x_platform_data pb44_pcf857x_data = { static struct i2c_board_info pb44_i2c_board_info[] __initdata = { { I2C_BOARD_INFO("pcf8575", 0x20), - .platform_data = &pb44_pcf857x_data, + .platform_data = &pb44_pcf857x_data, }, }; diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h index af92e5c..2625405 100644 --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h @@ -17,6 +17,7 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, ATH79_MACH_AP121, /* Atheros AP121 reference board */ + ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ ATH79_MACH_AP81, /* Atheros AP81 reference board */ ATH79_MACH_DB120, /* Atheros DB120 reference board */ ATH79_MACH_PB44, /* Atheros PB44 reference board */ diff --git a/arch/mips/ath79/pci.c b/arch/mips/ath79/pci.c index ca83abd..730c0b0 100644 --- a/arch/mips/ath79/pci.c +++ b/arch/mips/ath79/pci.c @@ -14,10 +14,11 @@ #include <linux/init.h> #include <linux/pci.h> +#include <linux/resource.h> +#include <linux/platform_device.h> #include <asm/mach-ath79/ar71xx_regs.h> #include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/irq.h> -#include <asm/mach-ath79/pci.h> #include "pci.h" static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev); @@ -48,6 +49,21 @@ static const struct ath79_pci_irq ar724x_pci_irq_map[] __initconst = { } }; +static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = { + { + .bus = 0, + .slot = 0, + .pin = 1, + .irq = ATH79_PCI_IRQ(0), + }, + { + .bus = 1, + .slot = 0, + .pin = 1, + .irq = ATH79_PCI_IRQ(1), + }, +}; + int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) { int irq = -1; @@ -63,6 +79,9 @@ int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) soc_is_ar9344()) { ath79_pci_irq_map = ar724x_pci_irq_map; ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map); + } else if (soc_is_qca955x()) { + ath79_pci_irq_map = qca955x_pci_irq_map; + ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); } else { pr_crit("pci %s: invalid irq map\n", pci_name((struct pci_dev *) dev)); @@ -74,7 +93,9 @@ int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) const struct ath79_pci_irq *entry; entry = &ath79_pci_irq_map[i]; - if (entry->slot == slot && entry->pin == pin) { + if (entry->bus == dev->bus->number && + entry->slot == slot && + entry->pin == pin) { irq = entry->irq; break; } @@ -110,21 +131,143 @@ void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)) ath79_pci_plat_dev_init = func; } -int __init ath79_register_pci(void) +static struct platform_device * +ath79_register_pci_ar71xx(void) +{ + struct platform_device *pdev; + struct resource res[4]; + + memset(res, 0, sizeof(res)); + + res[0].name = "cfg_base"; + res[0].flags = IORESOURCE_MEM; + res[0].start = AR71XX_PCI_CFG_BASE; + res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1; + + res[1].flags = IORESOURCE_IRQ; + res[1].start = ATH79_CPU_IRQ(2); + res[1].end = ATH79_CPU_IRQ(2); + + res[2].name = "io_base"; + res[2].flags = IORESOURCE_IO; + res[2].start = 0; + res[2].end = 0; + + res[3].name = "mem_base"; + res[3].flags = IORESOURCE_MEM; + res[3].start = AR71XX_PCI_MEM_BASE; + res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1; + + pdev = platform_device_register_simple("ar71xx-pci", -1, + res, ARRAY_SIZE(res)); + return pdev; +} + +static struct platform_device * +ath79_register_pci_ar724x(int id, + unsigned long cfg_base, + unsigned long ctrl_base, + unsigned long crp_base, + unsigned long mem_base, + unsigned long mem_size, + unsigned long io_base, + int irq) { - if (soc_is_ar71xx()) - return ar71xx_pcibios_init(); + struct platform_device *pdev; + struct resource res[6]; + + memset(res, 0, sizeof(res)); + + res[0].name = "cfg_base"; + res[0].flags = IORESOURCE_MEM; + res[0].start = cfg_base; + res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1; + + res[1].name = "ctrl_base"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ctrl_base; + res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1; + + res[2].flags = IORESOURCE_IRQ; + res[2].start = irq; + res[2].end = irq; + + res[3].name = "mem_base"; + res[3].flags = IORESOURCE_MEM; + res[3].start = mem_base; + res[3].end = mem_base + mem_size - 1; + + res[4].name = "io_base"; + res[4].flags = IORESOURCE_IO; + res[4].start = io_base; + res[4].end = io_base; - if (soc_is_ar724x()) - return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2); + res[5].name = "crp_base"; + res[5].flags = IORESOURCE_MEM; + res[5].start = crp_base; + res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1; - if (soc_is_ar9342() || soc_is_ar9344()) { + pdev = platform_device_register_simple("ar724x-pci", id, + res, ARRAY_SIZE(res)); + return pdev; +} + +int __init ath79_register_pci(void) +{ + struct platform_device *pdev = NULL; + + if (soc_is_ar71xx()) { + pdev = ath79_register_pci_ar71xx(); + } else if (soc_is_ar724x()) { + pdev = ath79_register_pci_ar724x(-1, + AR724X_PCI_CFG_BASE, + AR724X_PCI_CTRL_BASE, + AR724X_PCI_CRP_BASE, + AR724X_PCI_MEM_BASE, + AR724X_PCI_MEM_SIZE, + 0, + ATH79_CPU_IRQ(2)); + } else if (soc_is_ar9342() || + soc_is_ar9344()) { u32 bootstrap; bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); - if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC) - return ar724x_pcibios_init(ATH79_IP2_IRQ(0)); + if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0) + return -ENODEV; + + pdev = ath79_register_pci_ar724x(-1, + AR724X_PCI_CFG_BASE, + AR724X_PCI_CTRL_BASE, + AR724X_PCI_CRP_BASE, + AR724X_PCI_MEM_BASE, + AR724X_PCI_MEM_SIZE, + 0, + ATH79_IP2_IRQ(0)); + } else if (soc_is_qca9558()) { + pdev = ath79_register_pci_ar724x(0, + QCA955X_PCI_CFG_BASE0, + QCA955X_PCI_CTRL_BASE0, + QCA955X_PCI_CRP_BASE0, + QCA955X_PCI_MEM_BASE0, + QCA955X_PCI_MEM_SIZE, + 0, + ATH79_IP2_IRQ(0)); + + pdev = ath79_register_pci_ar724x(1, + QCA955X_PCI_CFG_BASE1, + QCA955X_PCI_CTRL_BASE1, + QCA955X_PCI_CRP_BASE1, + QCA955X_PCI_MEM_BASE1, + QCA955X_PCI_MEM_SIZE, + 1, + ATH79_IP3_IRQ(2)); + } else { + /* No PCI support */ + return -ENODEV; } - return -ENODEV; + if (!pdev) + pr_err("unable to register PCI controller device\n"); + + return pdev ? 0 : -ENODEV; } diff --git a/arch/mips/ath79/pci.h b/arch/mips/ath79/pci.h index 51c6625..1d00a38 100644 --- a/arch/mips/ath79/pci.h +++ b/arch/mips/ath79/pci.h @@ -14,6 +14,7 @@ #define _ATH79_PCI_H struct ath79_pci_irq { + int bus; u8 slot; u8 pin; int irq; diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index 60d212e..d5b3c90 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -164,13 +164,29 @@ static void __init ath79_detect_sys_type(void) rev = id & AR934X_REV_ID_REVISION_MASK; break; + case REV_ID_MAJOR_QCA9556: + ath79_soc = ATH79_SOC_QCA9556; + chip = "9556"; + rev = id & QCA955X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_QCA9558: + ath79_soc = ATH79_SOC_QCA9558; + chip = "9558"; + rev = id & QCA955X_REV_ID_REVISION_MASK; + break; + default: panic("ath79: unknown SoC, id:0x%08x", id); } ath79_soc_rev = rev; - sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); + if (soc_is_qca955x()) + sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u", + chip, rev); + else + sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); pr_info("SoC: %s\n", ath79_sys_type); } diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile index 1a3567f..f3bf6d5 100644 --- a/arch/mips/bcm47xx/Makefile +++ b/arch/mips/bcm47xx/Makefile @@ -3,5 +3,5 @@ # under Linux. # -obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o +obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c index 48a4c70..cc40b74 100644 --- a/arch/mips/bcm47xx/nvram.c +++ b/arch/mips/bcm47xx/nvram.c @@ -3,10 +3,10 @@ * * Copyright (C) 2005 Broadcom Corporation * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -18,83 +18,160 @@ #include <linux/kernel.h> #include <linux/string.h> #include <asm/addrspace.h> -#include <asm/mach-bcm47xx/nvram.h> +#include <bcm47xx_nvram.h> #include <asm/mach-bcm47xx/bcm47xx.h> static char nvram_buf[NVRAM_SPACE]; +static u32 find_nvram_size(u32 end) +{ + struct nvram_header *header; + u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000}; + int i; + + for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) { + header = (struct nvram_header *)KSEG1ADDR(end - nvram_sizes[i]); + if (header->magic == NVRAM_HEADER) + return nvram_sizes[i]; + } + + return 0; +} + /* Probe for NVRAM header */ -static void early_nvram_init(void) +static int nvram_find_and_copy(u32 base, u32 lim) { -#ifdef CONFIG_BCM47XX_SSB - struct ssb_mipscore *mcore_ssb; -#endif -#ifdef CONFIG_BCM47XX_BCMA - struct bcma_drv_cc *bcma_cc; -#endif struct nvram_header *header; int i; - u32 base = 0; - u32 lim = 0; u32 off; u32 *src, *dst; + u32 size; - switch (bcm47xx_bus_type) { -#ifdef CONFIG_BCM47XX_SSB - case BCM47XX_BUS_TYPE_SSB: - mcore_ssb = &bcm47xx_bus.ssb.mipscore; - base = mcore_ssb->pflash.window; - lim = mcore_ssb->pflash.window_size; - break; -#endif -#ifdef CONFIG_BCM47XX_BCMA - case BCM47XX_BUS_TYPE_BCMA: - bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc; - base = bcma_cc->pflash.window; - lim = bcma_cc->pflash.window_size; - break; -#endif - } - + /* TODO: when nvram is on nand flash check for bad blocks first. */ off = FLASH_MIN; while (off <= lim) { /* Windowed flash access */ - header = (struct nvram_header *) - KSEG1ADDR(base + off - NVRAM_SPACE); - if (header->magic == NVRAM_HEADER) + size = find_nvram_size(base + off); + if (size) { + header = (struct nvram_header *)KSEG1ADDR(base + off - + size); goto found; + } off <<= 1; } /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ header = (struct nvram_header *) KSEG1ADDR(base + 4096); - if (header->magic == NVRAM_HEADER) + if (header->magic == NVRAM_HEADER) { + size = NVRAM_SPACE; goto found; + } header = (struct nvram_header *) KSEG1ADDR(base + 1024); - if (header->magic == NVRAM_HEADER) + if (header->magic == NVRAM_HEADER) { + size = NVRAM_SPACE; goto found; + } - return; + pr_err("no nvram found\n"); + return -ENXIO; found: + + if (header->len > size) + pr_err("The nvram size accoridng to the header seems to be bigger than the partition on flash\n"); + if (header->len > NVRAM_SPACE) + pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n", + header->len, NVRAM_SPACE); + src = (u32 *) header; dst = (u32 *) nvram_buf; for (i = 0; i < sizeof(struct nvram_header); i += 4) *dst++ = *src++; - for (; i < header->len && i < NVRAM_SPACE; i += 4) + for (; i < header->len && i < NVRAM_SPACE && i < size; i += 4) *dst++ = le32_to_cpu(*src++); + memset(dst, 0x0, NVRAM_SPACE - i); + + return 0; } -int nvram_getenv(char *name, char *val, size_t val_len) +#ifdef CONFIG_BCM47XX_SSB +static int nvram_init_ssb(void) +{ + struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore; + u32 base; + u32 lim; + + if (mcore->pflash.present) { + base = mcore->pflash.window; + lim = mcore->pflash.window_size; + } else { + pr_err("Couldn't find supported flash memory\n"); + return -ENXIO; + } + + return nvram_find_and_copy(base, lim); +} +#endif + +#ifdef CONFIG_BCM47XX_BCMA +static int nvram_init_bcma(void) +{ + struct bcma_drv_cc *cc = &bcm47xx_bus.bcma.bus.drv_cc; + u32 base; + u32 lim; + +#ifdef CONFIG_BCMA_NFLASH + if (cc->nflash.boot) { + base = BCMA_SOC_FLASH1; + lim = BCMA_SOC_FLASH1_SZ; + } else +#endif + if (cc->pflash.present) { + base = cc->pflash.window; + lim = cc->pflash.window_size; +#ifdef CONFIG_BCMA_SFLASH + } else if (cc->sflash.present) { + base = cc->sflash.window; + lim = cc->sflash.size; +#endif + } else { + pr_err("Couldn't find supported flash memory\n"); + return -ENXIO; + } + + return nvram_find_and_copy(base, lim); +} +#endif + +static int nvram_init(void) +{ + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + return nvram_init_ssb(); +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + return nvram_init_bcma(); +#endif + } + return -ENXIO; +} + +int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len) { char *var, *value, *end, *eq; + int err; if (!name) - return NVRAM_ERR_INV_PARAM; + return -EINVAL; - if (!nvram_buf[0]) - early_nvram_init(); + if (!nvram_buf[0]) { + err = nvram_init(); + if (err) + return err; + } /* Look for name=value and return value */ var = &nvram_buf[sizeof(struct nvram_header)]; @@ -110,6 +187,6 @@ int nvram_getenv(char *name, char *val, size_t val_len) return snprintf(val, val_len, "%s", value); } } - return NVRAM_ERR_ENVNOTFOUND; + return -ENOENT; } -EXPORT_SYMBOL(nvram_getenv); +EXPORT_SYMBOL(bcm47xx_nvram_getenv); diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 4d54b58..b2246cd 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -35,7 +35,7 @@ #include <asm/reboot.h> #include <asm/time.h> #include <bcm47xx.h> -#include <asm/mach-bcm47xx/nvram.h> +#include <bcm47xx_nvram.h> union bcm47xx_bus bcm47xx_bus; EXPORT_SYMBOL(bcm47xx_bus); @@ -115,7 +115,7 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus, memset(&iv->sprom, 0, sizeof(struct ssb_sprom)); bcm47xx_fill_sprom(&iv->sprom, NULL, false); - if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) + if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); return 0; @@ -138,7 +138,7 @@ static void __init bcm47xx_register_ssb(void) panic("Failed to initialize SSB bus (err %d)", err); mcore = &bcm47xx_bus.ssb.mipscore; - if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { + if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { if (strstr(buf, "console=ttyS1")) { struct ssb_serial_port port; diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c index 289cc0a..ad03c93 100644 --- a/arch/mips/bcm47xx/sprom.c +++ b/arch/mips/bcm47xx/sprom.c @@ -27,7 +27,7 @@ */ #include <bcm47xx.h> -#include <nvram.h> +#include <bcm47xx_nvram.h> static void create_key(const char *prefix, const char *postfix, const char *name, char *buf, int len) @@ -50,18 +50,18 @@ static int get_nvram_var(const char *prefix, const char *postfix, create_key(prefix, postfix, name, key, sizeof(key)); - err = nvram_getenv(key, buf, len); - if (fallback && err == NVRAM_ERR_ENVNOTFOUND && prefix) { + err = bcm47xx_nvram_getenv(key, buf, len); + if (fallback && err == -ENOENT && prefix) { create_key(NULL, postfix, name, key, sizeof(key)); - err = nvram_getenv(key, buf, len); + err = bcm47xx_nvram_getenv(key, buf, len); } return err; } #define NVRAM_READ_VAL(type) \ static void nvram_read_ ## type (const char *prefix, \ - const char *postfix, const char *name, \ - type *val, type allset, bool fallback) \ + const char *postfix, const char *name, \ + type *val, type allset, bool fallback) \ { \ char buf[100]; \ int err; \ @@ -71,7 +71,7 @@ static void nvram_read_ ## type (const char *prefix, \ fallback); \ if (err < 0) \ return; \ - err = kstrto ## type (buf, 0, &var); \ + err = kstrto ## type(strim(buf), 0, &var); \ if (err) { \ pr_warn("can not parse nvram name %s%s%s with value %s got %i\n", \ prefix, name, postfix, buf, err); \ @@ -99,7 +99,7 @@ static void nvram_read_u32_2(const char *prefix, const char *name, err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback); if (err < 0) return; - err = kstrtou32(buf, 0, &val); + err = kstrtou32(strim(buf), 0, &val); if (err) { pr_warn("can not parse nvram name %s%s with value %s got %i\n", prefix, name, buf, err); @@ -120,7 +120,7 @@ static void nvram_read_leddc(const char *prefix, const char *name, err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback); if (err < 0) return; - err = kstrtou32(buf, 0, &val); + err = kstrtou32(strim(buf), 0, &val); if (err) { pr_warn("can not parse nvram name %s%s with value %s got %i\n", prefix, name, buf, err); @@ -144,7 +144,7 @@ static void nvram_read_macaddr(const char *prefix, const char *name, if (err < 0) return; - nvram_parse_macaddr(buf, *val); + bcm47xx_nvram_parse_macaddr(buf, *val); } static void nvram_read_alpha2(const char *prefix, const char *name, @@ -652,12 +652,10 @@ static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom, static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix, bool fallback) { - nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0, - fallback); + nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0, true); nvram_read_u16(prefix, NULL, "boardnum", &sprom->board_num, 0, fallback); - nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0, - fallback); + nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0, true); nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo, &sprom->boardflags_hi, fallback); nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo, diff --git a/arch/mips/bcm47xx/wgt634u.c b/arch/mips/bcm47xx/wgt634u.c index 9d111e8..c63a4c2 100644 --- a/arch/mips/bcm47xx/wgt634u.c +++ b/arch/mips/bcm47xx/wgt634u.c @@ -36,13 +36,13 @@ static struct gpio_led wgt634u_leds[] = { }; static struct gpio_led_platform_data wgt634u_led_data = { - .num_leds = ARRAY_SIZE(wgt634u_leds), - .leds = wgt634u_leds, + .num_leds = ARRAY_SIZE(wgt634u_leds), + .leds = wgt634u_leds, }; static struct platform_device wgt634u_gpio_leds = { - .name = "leds-gpio", - .id = -1, + .name = "leds-gpio", + .id = -1, .dev = { .platform_data = &wgt634u_led_data, } @@ -53,35 +53,35 @@ static struct platform_device wgt634u_gpio_leds = { firmware. */ static struct mtd_partition wgt634u_partitions[] = { { - .name = "cfe", - .offset = 0, - .size = 0x60000, /* 384k */ - .mask_flags = MTD_WRITEABLE /* force read-only */ + .name = "cfe", + .offset = 0, + .size = 0x60000, /* 384k */ + .mask_flags = MTD_WRITEABLE /* force read-only */ }, { - .name = "config", + .name = "config", .offset = 0x60000, - .size = 0x20000 /* 128k */ + .size = 0x20000 /* 128k */ }, { - .name = "linux", + .name = "linux", .offset = 0x80000, - .size = 0x140000 /* 1280k */ + .size = 0x140000 /* 1280k */ }, { - .name = "jffs", + .name = "jffs", .offset = 0x1c0000, - .size = 0x620000 /* 6272k */ + .size = 0x620000 /* 6272k */ }, { - .name = "nvram", + .name = "nvram", .offset = 0x7e0000, - .size = 0x20000 /* 128k */ + .size = 0x20000 /* 128k */ }, }; static struct physmap_flash_data wgt634u_flash_data = { - .parts = wgt634u_partitions, + .parts = wgt634u_partitions, .nr_parts = ARRAY_SIZE(wgt634u_partitions) }; @@ -90,9 +90,9 @@ static struct resource wgt634u_flash_resource = { }; static struct platform_device wgt634u_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { .platform_data = &wgt634u_flash_data, }, + .name = "physmap-flash", + .id = 0, + .dev = { .platform_data = &wgt634u_flash_data, }, .resource = &wgt634u_flash_resource, .num_resources = 1, }; diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 73be9b3..ed1949c 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -406,9 +406,9 @@ static struct board_info __initdata board_FAST2404 = { .expected_cpu_id = 0x6348, .has_uart0 = 1, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, .enet0 = { .has_phy = 1, @@ -591,22 +591,22 @@ static struct board_info __initdata board_96358vw2 = { }; static struct board_info __initdata board_AGPFS0 = { - .name = "AGPF-S0", - .expected_cpu_id = 0x6358, + .name = "AGPF-S0", + .expected_cpu_id = 0x6358, .has_uart0 = 1, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, + .has_phy = 1, + .use_internal_phy = 1, }, .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, + .force_speed_100 = 1, + .force_duplex_full = 1, }, .has_ohci0 = 1, @@ -677,7 +677,7 @@ static struct ssb_sprom bcm63xx_sprom = { .revision = 0x02, .board_rev = 0x17, .country_code = 0x0, - .ant_available_bg = 0x3, + .ant_available_bg = 0x3, .pa0b0 = 0x15ae, .pa0b1 = 0xfa85, .pa0b2 = 0xfe8d, diff --git a/arch/mips/bcm63xx/early_printk.c b/arch/mips/bcm63xx/early_printk.c index bf353c9..aa8f7f9 100644 --- a/arch/mips/bcm63xx/early_printk.c +++ b/arch/mips/bcm63xx/early_printk.c @@ -10,7 +10,7 @@ #include <bcm63xx_io.h> #include <bcm63xx_regs.h> -static void __init wait_xfered(void) +static void wait_xfered(void) { unsigned int val; @@ -22,7 +22,7 @@ static void __init wait_xfered(void) } while (1); } -void __init prom_putchar(char c) +void prom_putchar(char c) { wait_xfered(); bcm_uart0_writel(c, UART_FIFO_REG); diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile index 85bcb5a..851261e 100644 --- a/arch/mips/boot/Makefile +++ b/arch/mips/boot/Makefile @@ -24,7 +24,7 @@ strip-flags := $(addprefix --remove-section=,$(drop-sections)) hostprogs-y := elf2ecoff targets := vmlinux.ecoff -quiet_cmd_ecoff = ECOFF $@ +quiet_cmd_ecoff = ECOFF $@ cmd_ecoff = $(obj)/elf2ecoff $(VMLINUX) $@ $(e2eflag) $(obj)/vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) FORCE $(call if_changed,ecoff) diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index c2a3fb0..bbaa1d4 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -51,7 +51,7 @@ $(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE targets += piggy.o OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \ - --set-section-flags=.image=contents,alloc,load,readonly,data + --set-section-flags=.image=contents,alloc,load,readonly,data $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE $(call if_changed,objcopy) @@ -67,9 +67,9 @@ endif vmlinuzobjs-y += $(obj)/piggy.o -quiet_cmd_zld = LD $@ +quiet_cmd_zld = LD $@ cmd_zld = $(LD) $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T $< $(vmlinuzobjs-y) -o $@ -quiet_cmd_strip = STRIP $@ +quiet_cmd_strip = STRIP $@ cmd_strip = $(STRIP) -s $@ vmlinuz: $(src)/ld.script $(vmlinuzobjs-y) $(obj)/calc_vmlinuz_load_addr $(call cmd,zld) @@ -96,7 +96,7 @@ quiet_cmd_32 = OBJCOPY $@ vmlinuz.32: vmlinuz $(call cmd,32) -quiet_cmd_ecoff = ECOFF $@ +quiet_cmd_ecoff = ECOFF $@ cmd_ecoff = $< $(VMLINUZ) $@ $(e2eflag) vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ) $(call cmd,ecoff) diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c index 9a62436..37fe58c 100644 --- a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c +++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c @@ -1,8 +1,8 @@ /* * Copyright (C) 2010 "Wu Zhangjin" <wuzhangjin@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c index 5cad0fa..2c95730 100644 --- a/arch/mips/boot/compressed/decompress.c +++ b/arch/mips/boot/compressed/decompress.c @@ -5,8 +5,8 @@ * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin <wuzhangjin@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/boot/compressed/head.S b/arch/mips/boot/compressed/head.S index 4e65a84..409cb48 100644 --- a/arch/mips/boot/compressed/head.S +++ b/arch/mips/boot/compressed/head.S @@ -32,8 +32,8 @@ start: bne a2, a0, 1b addiu a0, a0, 4 - PTR_LA a0, (.heap) /* heap address */ - PTR_LA sp, (.stack + 8192) /* stack address */ + PTR_LA a0, (.heap) /* heap address */ + PTR_LA sp, (.stack + 8192) /* stack address */ PTR_LA ra, 2f PTR_LA k0, decompress_kernel diff --git a/arch/mips/boot/ecoff.h b/arch/mips/boot/ecoff.h index 8c3eed2..83e5c38 100644 --- a/arch/mips/boot/ecoff.h +++ b/arch/mips/boot/ecoff.h @@ -2,48 +2,48 @@ * Some ECOFF definitions. */ typedef struct filehdr { - unsigned short f_magic; /* magic number */ - unsigned short f_nscns; /* number of sections */ - long f_timdat; /* time & date stamp */ - long f_symptr; /* file pointer to symbolic header */ - long f_nsyms; /* sizeof(symbolic hdr) */ - unsigned short f_opthdr; /* sizeof(optional hdr) */ - unsigned short f_flags; /* flags */ + unsigned short f_magic; /* magic number */ + unsigned short f_nscns; /* number of sections */ + long f_timdat; /* time & date stamp */ + long f_symptr; /* file pointer to symbolic header */ + long f_nsyms; /* sizeof(symbolic hdr) */ + unsigned short f_opthdr; /* sizeof(optional hdr) */ + unsigned short f_flags; /* flags */ } FILHDR; -#define FILHSZ sizeof(FILHDR) +#define FILHSZ sizeof(FILHDR) #define OMAGIC 0407 #define MIPSEBMAGIC 0x160 #define MIPSELMAGIC 0x162 typedef struct scnhdr { - char s_name[8]; /* section name */ - long s_paddr; /* physical address, aliased s_nlib */ - long s_vaddr; /* virtual address */ - long s_size; /* section size */ - long s_scnptr; /* file ptr to raw data for section */ - long s_relptr; /* file ptr to relocation */ - long s_lnnoptr; /* file ptr to gp histogram */ - unsigned short s_nreloc; /* number of relocation entries */ - unsigned short s_nlnno; /* number of gp histogram entries */ - long s_flags; /* flags */ + char s_name[8]; /* section name */ + long s_paddr; /* physical address, aliased s_nlib */ + long s_vaddr; /* virtual address */ + long s_size; /* section size */ + long s_scnptr; /* file ptr to raw data for section */ + long s_relptr; /* file ptr to relocation */ + long s_lnnoptr; /* file ptr to gp histogram */ + unsigned short s_nreloc; /* number of relocation entries */ + unsigned short s_nlnno; /* number of gp histogram entries */ + long s_flags; /* flags */ } SCNHDR; #define SCNHSZ sizeof(SCNHDR) #define SCNROUND ((long)16) typedef struct aouthdr { - short magic; /* see above */ - short vstamp; /* version stamp */ - long tsize; /* text size in bytes, padded to DW bdry*/ - long dsize; /* initialized data " " */ - long bsize; /* uninitialized data " " */ - long entry; /* entry pt. */ - long text_start; /* base of text used for this file */ - long data_start; /* base of data used for this file */ - long bss_start; /* base of bss used for this file */ - long gprmask; /* general purpose register mask */ - long cprmask[4]; /* co-processor register masks */ - long gp_value; /* the gp value used for this object */ + short magic; /* see above */ + short vstamp; /* version stamp */ + long tsize; /* text size in bytes, padded to DW bdry*/ + long dsize; /* initialized data " " */ + long bsize; /* uninitialized data " " */ + long entry; /* entry pt. */ + long text_start; /* base of text used for this file */ + long data_start; /* base of data used for this file */ + long bss_start; /* base of bss used for this file */ + long gprmask; /* general purpose register mask */ + long cprmask[4]; /* co-processor register masks */ + long gp_value; /* the gp value used for this object */ } AOUTHDR; #define AOUTHSZ sizeof(AOUTHDR) @@ -51,7 +51,7 @@ typedef struct aouthdr { #define NMAGIC 0410 #define ZMAGIC 0413 #define SMAGIC 0411 -#define LIBMAGIC 0443 +#define LIBMAGIC 0443 #define N_TXTOFF(f, a) \ ((a).magic == ZMAGIC || (a).magic == LIBMAGIC ? 0 : \ diff --git a/arch/mips/boot/elf2ecoff.c b/arch/mips/boot/elf2ecoff.c index e19d906..8585078 100644 --- a/arch/mips/boot/elf2ecoff.c +++ b/arch/mips/boot/elf2ecoff.c @@ -29,7 +29,7 @@ /* elf2ecoff.c This program converts an elf executable to an ECOFF executable. - No symbol table is retained. This is useful primarily in building + No symbol table is retained. This is useful primarily in building net-bootable kernels for machines (e.g., DECstation and Alpha) which only support the ECOFF object file format. */ @@ -341,7 +341,7 @@ int main(int argc, char *argv[]) /* Figure out if we can cram the program header into an ECOFF header... Basically, we can't handle anything but loadable - segments, but we can ignore some kinds of segments. We can't + segments, but we can ignore some kinds of segments. We can't handle holes in the address space. Segments may be out of order, so we sort them first. */ @@ -514,7 +514,7 @@ int main(int argc, char *argv[]) for (i = 0; i < nosecs; i++) { printf - ("Section %d: %s phys %lx size %lx file offset %lx\n", + ("Section %d: %s phys %lx size %lx file offset %lx\n", i, esecs[i].s_name, esecs[i].s_paddr, esecs[i].s_size, esecs[i].s_scnptr); } @@ -551,7 +551,7 @@ int main(int argc, char *argv[]) } /* - * Copy the loadable sections. Zero-fill any gaps less than 64k; + * Copy the loadable sections. Zero-fill any gaps less than 64k; * complain about any zero-filling, and die if we're asked to zero-fill * more than 64k. */ diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig index 2f4f6d5..75a6df7 100644 --- a/arch/mips/cavium-octeon/Kconfig +++ b/arch/mips/cavium-octeon/Kconfig @@ -94,4 +94,13 @@ config SWIOTLB select NEED_SG_DMA_LENGTH +config OCTEON_ILM + tristate "Module to measure interrupt latency using Octeon CIU Timer" + help + This driver is a module to measure interrupt latency using the + the CIU Timers on Octeon. + + To compile this driver as a module, choose M here. The module + will be called octeon-ilm + endif # CPU_CAVIUM_OCTEON diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index 6e927cf..3595aff 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -17,7 +17,8 @@ obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o obj-y += executive/ -obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_OCTEON_ILM) += oct_ilm.o DTS_FILES = octeon_3xxx.dts octeon_68xx.dts DTB_FILES = $(patsubst %.dts, %.dtb, $(DTS_FILES)) diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c index 6d5ddbc..504ed61 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c +++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c @@ -155,8 +155,8 @@ int cvmx_bootmem_init(void *mem_desc_ptr) * * Linux 64 bit: Set XKPHYS bit * Linux 32 bit: use mmap to create mapping, use virtual address - * CVMX 64 bit: use physical address directly - * CVMX 32 bit: use physical address directly + * CVMX 64 bit: use physical address directly + * CVMX 32 bit: use physical address directly * * Note that the CVMX environment assumes the use of 1-1 TLB * mappings so that the physical addresses can be used @@ -398,7 +398,7 @@ error_out: int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags) { uint64_t cur_addr; - uint64_t prev_addr = 0; /* zero is invalid */ + uint64_t prev_addr = 0; /* zero is invalid */ int retval = 0; #ifdef DEBUG @@ -424,7 +424,7 @@ int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags) if (cur_addr == 0 || phy_addr < cur_addr) { /* add at front of list - special case with changing head ptr */ if (cur_addr && phy_addr + size > cur_addr) - goto bootmem_free_done; /* error, overlapping section */ + goto bootmem_free_done; /* error, overlapping section */ else if (phy_addr + size == cur_addr) { /* Add to front of existing first block */ cvmx_bootmem_phy_set_next(phy_addr, @@ -611,7 +611,7 @@ int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags) } cvmx_bootmem_unlock(); - return named_block_ptr != NULL; /* 0 on failure, 1 on success */ + return named_block_ptr != NULL; /* 0 on failure, 1 on success */ } int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr, diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c index fd20153..7c64977 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c @@ -203,10 +203,10 @@ int cvmx_helper_board_get_mii_address(int ipd_port) * enumeration from the bootloader. * * @ipd_port: IPD input port associated with the port we want to get link - * status for. + * status for. * * Returns The ports link status. If the link isn't fully resolved, this must - * return zero. + * return zero. */ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) { @@ -357,16 +357,16 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) result.s.link_up = 1; result.s.full_duplex = ((phy_status >> 13) & 1); switch ((phy_status >> 14) & 3) { - case 0: /* 10 Mbps */ + case 0: /* 10 Mbps */ result.s.speed = 10; break; - case 1: /* 100 Mbps */ + case 1: /* 100 Mbps */ result.s.speed = 100; break; - case 2: /* 1 Gbps */ + case 2: /* 1 Gbps */ result.s.speed = 1000; break; - case 3: /* Illegal */ + case 3: /* Illegal */ result.u64 = 0; break; } @@ -391,16 +391,16 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) result.s.link_up = inband_status.s.status; result.s.full_duplex = inband_status.s.duplex; switch (inband_status.s.speed) { - case 0: /* 10 Mbps */ + case 0: /* 10 Mbps */ result.s.speed = 10; break; - case 1: /* 100 Mbps */ + case 1: /* 100 Mbps */ result.s.speed = 100; break; - case 2: /* 1 Gbps */ + case 2: /* 1 Gbps */ result.s.speed = 1000; break; - case 3: /* Illegal */ + case 3: /* Illegal */ result.u64 = 0; break; } @@ -429,9 +429,9 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) * * @phy_addr: The address of the PHY to program * @enable_autoneg: - * Non zero if you want to enable auto-negotiation. + * Non zero if you want to enable auto-negotiation. * @link_info: Link speed to program. If the speed is zero and auto-negotiation - * is enabled, all possible negotiation speeds are advertised. + * is enabled, all possible negotiation speeds are advertised. * * Returns Zero on success, negative on failure */ @@ -607,10 +607,10 @@ int cvmx_helper_board_link_set_phy(int phy_addr, * * @interface: Interface to probe * @supported_ports: - * Number of ports Octeon supports. + * Number of ports Octeon supports. * * Returns Number of ports the actual board supports. Many times this will - * simple be "support_ports". + * simple be "support_ports". */ int __cvmx_helper_board_interface_probe(int interface, int supported_ports) { diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c index c1c5489..607b4e6 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c @@ -79,10 +79,10 @@ void cvmx_helper_qlm_jtag_init(void) * @qlm: QLM to shift value into * @bits: Number of bits to shift in (1-32). * @data: Data to shift in. Bit 0 enters the chain first, followed by - * bit 1, etc. + * bit 1, etc. * * Returns The low order bits of the JTAG chain that shifted out of the - * circle. + * circle. */ uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data) { diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c index 82b2184..f59c88e 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c @@ -131,7 +131,7 @@ void cvmx_helper_rgmii_internal_loopback(int port) * @interface: Interface to setup * @port: Port to setup (0..3) * @cpu_clock_hz: - * Chip frequency in Hertz + * Chip frequency in Hertz * * Returns Zero on success, negative on failure */ @@ -409,14 +409,14 @@ int __cvmx_helper_rgmii_link_set(int ipd_port, mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); /* - * Port .en .type .p0mii Configuration - * ---- --- ----- ------ ----------------------------------------- - * X 0 X X All links are disabled. - * 0 1 X 0 Port 0 is RGMII - * 0 1 X 1 Port 0 is MII - * 1 1 0 X Ports 1 and 2 are configured as RGMII ports. - * 1 1 1 X Port 1: GMII/MII; Port 2: disabled. GMII or - * MII port is selected by GMX_PRT1_CFG[SPEED]. + * Port .en .type .p0mii Configuration + * ---- --- ----- ------ ----------------------------------------- + * X 0 X X All links are disabled. + * 0 1 X 0 Port 0 is RGMII + * 0 1 X 1 Port 0 is MII + * 1 1 0 X Ports 1 and 2 are configured as RGMII ports. + * 1 1 1 X Port 1: GMII/MII; Port 2: disabled. GMII or + * MII port is selected by GMX_PRT1_CFG[SPEED]. */ /* In MII mode, CLK_CNT = 1. */ @@ -464,9 +464,9 @@ int __cvmx_helper_rgmii_link_set(int ipd_port, * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c index 0c0bf5d..45f18cc 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c @@ -523,9 +523,9 @@ int __cvmx_helper_sgmii_link_set(int ipd_port, * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c index 2830e4b..1f3030c 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c @@ -160,16 +160,16 @@ cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port) result.s.link_up = inband.s.status; result.s.full_duplex = inband.s.duplex; switch (inband.s.speed) { - case 0: /* 10 Mbps */ + case 0: /* 10 Mbps */ result.s.speed = 10; break; - case 1: /* 100 Mbps */ + case 1: /* 100 Mbps */ result.s.speed = 100; break; - case 2: /* 1 Gbps */ + case 2: /* 1 Gbps */ result.s.speed = 1000; break; - case 3: /* Illegal */ + case 3: /* Illegal */ result.s.speed = 0; result.s.link_up = 0; break; diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c index dfdfe8b..65d2bc9 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c @@ -96,9 +96,9 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) uint8_t *end_of_data; cvmx_dprintf("Packet Length: %u\n", work->len); - cvmx_dprintf(" Input Port: %u\n", work->ipprt); - cvmx_dprintf(" QoS: %u\n", work->qos); - cvmx_dprintf(" Buffers: %u\n", work->word2.s.bufs); + cvmx_dprintf(" Input Port: %u\n", work->ipprt); + cvmx_dprintf(" QoS: %u\n", work->qos); + cvmx_dprintf(" Buffers: %u\n", work->word2.s.bufs); if (work->word2.s.bufs == 0) { union cvmx_ipd_wqe_fpa_queue wqe_pool; @@ -132,14 +132,14 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) while (remaining_bytes) { start_of_buffer = ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7; - cvmx_dprintf(" Buffer Start:%llx\n", + cvmx_dprintf(" Buffer Start:%llx\n", (unsigned long long)start_of_buffer); - cvmx_dprintf(" Buffer I : %u\n", buffer_ptr.s.i); - cvmx_dprintf(" Buffer Back: %u\n", buffer_ptr.s.back); - cvmx_dprintf(" Buffer Pool: %u\n", buffer_ptr.s.pool); - cvmx_dprintf(" Buffer Data: %llx\n", + cvmx_dprintf(" Buffer I : %u\n", buffer_ptr.s.i); + cvmx_dprintf(" Buffer Back: %u\n", buffer_ptr.s.back); + cvmx_dprintf(" Buffer Pool: %u\n", buffer_ptr.s.pool); + cvmx_dprintf(" Buffer Data: %llx\n", (unsigned long long)buffer_ptr.s.addr); - cvmx_dprintf(" Buffer Size: %u\n", buffer_ptr.s.size); + cvmx_dprintf(" Buffer Size: %u\n", buffer_ptr.s.size); cvmx_dprintf("\t\t"); data_address = (uint8_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr); @@ -172,11 +172,11 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) * * @queue: Input queue to setup RED on (0-7) * @pass_thresh: - * Packets will begin slowly dropping when there are less than - * this many packet buffers free in FPA 0. + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. * @drop_thresh: - * All incoming packets will be dropped when there are less - * than this many free packet buffers in FPA 0. + * All incoming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh) @@ -207,11 +207,11 @@ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh) * Setup Random Early Drop to automatically begin dropping packets. * * @pass_thresh: - * Packets will begin slowly dropping when there are less than - * this many packet buffers free in FPA 0. + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. * @drop_thresh: - * All incoming packets will be dropped when there are less - * than this many free packet buffers in FPA 0. + * All incoming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ int cvmx_helper_setup_red(int pass_thresh, int drop_thresh) diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c index 1723248e..7653b7e 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c @@ -321,9 +321,9 @@ int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info) * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c index fa49638..d63d20d 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c @@ -111,7 +111,7 @@ int cvmx_helper_ports_on_interface(int interface) * @interface: Interface to probe * * Returns Mode of the interface. Unknown or unsupported interfaces return - * DISABLED. + * DISABLED. */ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface) { @@ -187,7 +187,7 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface) * the defines in executive-config.h. * * @ipd_port: Port to configure. This follows the IPD numbering, not the - * per interface numbering + * per interface numbering * * Returns Zero on success, negative on failure */ @@ -591,7 +591,7 @@ static int __cvmx_helper_packet_hardware_enable(int interface) * Function to adjust internal IPD pointer alignments * * Returns 0 on success - * !0 on failure + * !0 on failure */ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void) { @@ -1068,9 +1068,9 @@ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info) * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c index 560e034..fa327ec 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c +++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c @@ -85,11 +85,11 @@ void __cvmx_interrupt_gmxx_enable(int interface) if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { if (mode.s.en) { switch (mode.cn56xx.mode) { - case 1: /* XAUI */ + case 1: /* XAUI */ num_ports = 1; break; - case 2: /* SGMII */ - case 3: /* PICMG */ + case 2: /* SGMII */ + case 3: /* PICMG */ num_ports = 4; break; default: /* Disabled */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c index 33b7214..42e38c3 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c +++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c @@ -147,7 +147,7 @@ int cvmx_l2c_set_hw_way_partition(uint32_t mask) mask &= valid_mask; /* A UMSK setting which blocks all L2C Ways is an error on some chips */ - if (mask == valid_mask && !OCTEON_IS_MODEL(OCTEON_CN63XX)) + if (mask == valid_mask && !OCTEON_IS_MODEL(OCTEON_CN63XX)) return -1; if (OCTEON_IS_MODEL(OCTEON_CN63XX)) @@ -438,7 +438,7 @@ void cvmx_l2c_flush(void) for (set = 0; set < n_set; set++) { for (assoc = 0; assoc < n_assoc; assoc++) { address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, - (assoc << assoc_shift) | (set << set_shift)); + (assoc << assoc_shift) | (set << set_shift)); CVMX_CACHE_WBIL2I(address, 0); } } @@ -573,8 +573,8 @@ union __cvmx_l2c_tag { * @index: Index of the cacheline * * Returns The Octeon model specific tag structure. This is - * translated by a wrapper function to a generic form that is - * easier for applications to use. + * translated by a wrapper function to a generic form that is + * easier for applications to use. */ static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index) { @@ -618,12 +618,12 @@ static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index) ".set push\n\t" ".set mips64\n\t" ".set noreorder\n\t" - "sd %[dbg_val], 0(%[dbg_addr])\n\t" /* Enter debug mode, wait for store */ + "sd %[dbg_val], 0(%[dbg_addr])\n\t" /* Enter debug mode, wait for store */ "ld $0, 0(%[dbg_addr])\n\t" - "ld %[tag_val], 0(%[tag_addr])\n\t" /* Read L2C tag data */ - "sd $0, 0(%[dbg_addr])\n\t" /* Exit debug mode, wait for store */ + "ld %[tag_val], 0(%[tag_addr])\n\t" /* Read L2C tag data */ + "sd $0, 0(%[dbg_addr])\n\t" /* Exit debug mode, wait for store */ "ld $0, 0(%[dbg_addr])\n\t" - "cache 9, 0($0)\n\t" /* Invalidate dcache to discard debug data */ + "cache 9, 0($0)\n\t" /* Invalidate dcache to discard debug data */ ".set pop" : [tag_val] "=r" (tag_val) : [dbg_addr] "r" (dbg_addr), [dbg_val] "r" (debug_val), [tag_addr] "r" (debug_tag_addr) @@ -664,10 +664,10 @@ union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index) CVMX_SYNC; /* make sure CVMX_L2C_TADX_TAG is updated */ l2c_tadx_tag.u64 = cvmx_read_csr(CVMX_L2C_TADX_TAG(0)); - tag.s.V = l2c_tadx_tag.s.valid; - tag.s.D = l2c_tadx_tag.s.dirty; - tag.s.L = l2c_tadx_tag.s.lock; - tag.s.U = l2c_tadx_tag.s.use; + tag.s.V = l2c_tadx_tag.s.valid; + tag.s.D = l2c_tadx_tag.s.dirty; + tag.s.L = l2c_tadx_tag.s.lock; + tag.s.U = l2c_tadx_tag.s.use; tag.s.addr = l2c_tadx_tag.s.tag; } else { union __cvmx_l2c_tag tmp_tag; @@ -679,34 +679,34 @@ union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index) * as it can represent all models. */ if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) { - tag.s.V = tmp_tag.cn58xx.V; - tag.s.D = tmp_tag.cn58xx.D; - tag.s.L = tmp_tag.cn58xx.L; - tag.s.U = tmp_tag.cn58xx.U; + tag.s.V = tmp_tag.cn58xx.V; + tag.s.D = tmp_tag.cn58xx.D; + tag.s.L = tmp_tag.cn58xx.L; + tag.s.U = tmp_tag.cn58xx.U; tag.s.addr = tmp_tag.cn58xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { - tag.s.V = tmp_tag.cn38xx.V; - tag.s.D = tmp_tag.cn38xx.D; - tag.s.L = tmp_tag.cn38xx.L; - tag.s.U = tmp_tag.cn38xx.U; + tag.s.V = tmp_tag.cn38xx.V; + tag.s.D = tmp_tag.cn38xx.D; + tag.s.L = tmp_tag.cn38xx.L; + tag.s.U = tmp_tag.cn38xx.U; tag.s.addr = tmp_tag.cn38xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { - tag.s.V = tmp_tag.cn31xx.V; - tag.s.D = tmp_tag.cn31xx.D; - tag.s.L = tmp_tag.cn31xx.L; - tag.s.U = tmp_tag.cn31xx.U; + tag.s.V = tmp_tag.cn31xx.V; + tag.s.D = tmp_tag.cn31xx.D; + tag.s.L = tmp_tag.cn31xx.L; + tag.s.U = tmp_tag.cn31xx.U; tag.s.addr = tmp_tag.cn31xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) { - tag.s.V = tmp_tag.cn30xx.V; - tag.s.D = tmp_tag.cn30xx.D; - tag.s.L = tmp_tag.cn30xx.L; - tag.s.U = tmp_tag.cn30xx.U; + tag.s.V = tmp_tag.cn30xx.V; + tag.s.D = tmp_tag.cn30xx.D; + tag.s.L = tmp_tag.cn30xx.L; + tag.s.U = tmp_tag.cn30xx.U; tag.s.addr = tmp_tag.cn30xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { - tag.s.V = tmp_tag.cn50xx.V; - tag.s.D = tmp_tag.cn50xx.D; - tag.s.L = tmp_tag.cn50xx.L; - tag.s.U = tmp_tag.cn50xx.U; + tag.s.V = tmp_tag.cn50xx.V; + tag.s.D = tmp_tag.cn50xx.D; + tag.s.L = tmp_tag.cn50xx.L; + tag.s.U = tmp_tag.cn50xx.U; tag.s.addr = tmp_tag.cn50xx.addr; } else { cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__); @@ -865,7 +865,7 @@ void cvmx_l2c_flush_line(uint32_t assoc, uint32_t index) uint64_t address; /* Create the address based on index and association. * Bits<20:17> select the way of the cache block involved in - * the operation + * the operation * Bits<16:7> of the effect address select the index */ address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c index f557084..f2c8775 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-pko.c +++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c @@ -99,7 +99,7 @@ void cvmx_pko_initialize_global(void) * be called after the FPA has been initialized and filled with pages. * * Returns 0 on success - * !0 on failure + * !0 on failure */ int cvmx_pko_initialize_local(void) { @@ -186,19 +186,19 @@ void cvmx_pko_shutdown(void) /** * Configure a output port and the associated queues for use. * - * @port: Port to configure. + * @port: Port to configure. * @base_queue: First queue number to associate with this port. * @num_queues: Number of queues to associate with this port - * @priority: Array of priority levels for each queue. Values are - * allowed to be 0-8. A value of 8 get 8 times the traffic - * of a value of 1. A value of 0 indicates that no rounds - * will be participated in. These priorities can be changed - * on the fly while the pko is enabled. A priority of 9 - * indicates that static priority should be used. If static - * priority is used all queues with static priority must be - * contiguous starting at the base_queue, and lower numbered - * queues have higher priority than higher numbered queues. - * There must be num_queues elements in the array. + * @priority: Array of priority levels for each queue. Values are + * allowed to be 0-8. A value of 8 get 8 times the traffic + * of a value of 1. A value of 0 indicates that no rounds + * will be participated in. These priorities can be changed + * on the fly while the pko is enabled. A priority of 9 + * indicates that static priority should be used. If static + * priority is used all queues with static priority must be + * contiguous starting at the base_queue, and lower numbered + * queues have higher priority than higher numbered queues. + * There must be num_queues elements in the array. */ cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, uint64_t num_queues, @@ -440,7 +440,7 @@ void cvmx_pko_show_queue_map() * @port: Port to rate limit * @packets_s: Maximum packet/sec * @burst: Maximum number of packets to burst in a row before rate - * limiting cuts in. + * limiting cuts in. * * Returns Zero on success, negative on failure */ @@ -473,7 +473,7 @@ int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst) * @port: Port to rate limit * @bits_s: PKO rate limit in bits/sec * @burst: Maximum number of bits to burst before rate - * limiting cuts in. + * limiting cuts in. * * Returns Zero on success, negative on failure */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c index 74afb17..ef5198d 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-spi.c +++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c @@ -69,7 +69,7 @@ static cvmx_spi_callbacks_t cvmx_spi_callbacks = { /** * Get current SPI4 initialization callbacks * - * @callbacks: Pointer to the callbacks structure.to fill + * @callbacks: Pointer to the callbacks structure.to fill * * Returns Pointer to cvmx_spi_callbacks_t structure. */ @@ -92,11 +92,11 @@ void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks) * Initialize and start the SPI interface. * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * @num_ports: Number of SPI ports to configure * @@ -138,11 +138,11 @@ int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, int timeout, * with its correspondent system. * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * * Returns Zero on success, negative of failure. @@ -160,7 +160,7 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout) INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode); /* NOTE: Calendar setup is not performed during restart */ - /* Refer to cvmx_spi_start_interface() for the full sequence */ + /* Refer to cvmx_spi_start_interface() for the full sequence */ /* Callback to perform clock detection */ INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout); @@ -182,11 +182,11 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to perform SPI4 reset * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * * Returns Zero on success, non-zero error code on failure (will cause * SPI initialization to abort) @@ -297,11 +297,11 @@ int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode) * Callback to setup calendar and miscellaneous settings before clock detection * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @num_ports: Number of ports to configure on SPI * * Returns Zero on success, non-zero error code on failure (will cause @@ -382,7 +382,7 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, stxx_spi4_dat.u64 = 0; /*Minimum needed by dynamic alignment */ stxx_spi4_dat.s.alpha = 32; - stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */ + stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */ cvmx_write_csr(CVMX_STXX_SPI4_DAT(interface), stxx_spi4_dat.u64); @@ -416,11 +416,11 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, * Callback to perform clock detection * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * * Returns Zero on success, non-zero error code on failure (will cause @@ -494,11 +494,11 @@ int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to perform link training * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for link to be trained (in seconds) * * Returns Zero on success, non-zero error code on failure (will cause @@ -563,11 +563,11 @@ int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to perform calendar data synchronization * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for calendar data in seconds * * Returns Zero on success, non-zero error code on failure (will cause @@ -620,11 +620,11 @@ int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to handle interface up * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * * Returns Zero on success, non-zero error code on failure (will cause * SPI initialization to abort) diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c index 8b18a20..3d17fac 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c +++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c @@ -74,26 +74,26 @@ EXPORT_SYMBOL(cvmx_sysinfo_get); /** * This function is used in non-simple executive environments (such as - * Linux kernel, u-boot, etc.) to configure the minimal fields that + * Linux kernel, u-boot, etc.) to configure the minimal fields that * are required to use simple executive files directly. * * Locking (if required) must be handled outside of this * function * * @phy_mem_desc_ptr: - * Pointer to global physical memory descriptor - * (bootmem descriptor) @board_type: Octeon board - * type enumeration + * Pointer to global physical memory descriptor + * (bootmem descriptor) @board_type: Octeon board + * type enumeration * * @board_rev_major: - * Board major revision + * Board major revision * @board_rev_minor: - * Board minor revision + * Board minor revision * @cpu_clock_hz: - * CPU clock freqency in hertz + * CPU clock freqency in hertz * * Returns 0: Failure - * 1: success + * 1: success */ int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr, uint16_t board_type, diff --git a/arch/mips/cavium-octeon/oct_ilm.c b/arch/mips/cavium-octeon/oct_ilm.c new file mode 100644 index 0000000..71b213d --- /dev/null +++ b/arch/mips/cavium-octeon/oct_ilm.c @@ -0,0 +1,206 @@ +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-ciu-defs.h> +#include <asm/octeon/cvmx.h> +#include <linux/debugfs.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/seq_file.h> + +#define TIMER_NUM 3 + +static bool reset_stats; + +struct latency_info { + u64 io_interval; + u64 cpu_interval; + u64 timer_start1; + u64 timer_start2; + u64 max_latency; + u64 min_latency; + u64 latency_sum; + u64 average_latency; + u64 interrupt_cnt; +}; + +static struct latency_info li; +static struct dentry *dir; + +static int show_latency(struct seq_file *m, void *v) +{ + u64 cpuclk, avg, max, min; + struct latency_info curr_li = li; + + cpuclk = octeon_get_clock_rate(); + + max = (curr_li.max_latency * 1000000000) / cpuclk; + min = (curr_li.min_latency * 1000000000) / cpuclk; + avg = (curr_li.latency_sum * 1000000000) / (cpuclk * curr_li.interrupt_cnt); + + seq_printf(m, "cnt: %10lld, avg: %7lld ns, max: %7lld ns, min: %7lld ns\n", + curr_li.interrupt_cnt, avg, max, min); + return 0; +} + +static int oct_ilm_open(struct inode *inode, struct file *file) +{ + return single_open(file, show_latency, NULL); +} + +static const struct file_operations oct_ilm_ops = { + .open = oct_ilm_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int reset_statistics(void *data, u64 value) +{ + reset_stats = true; + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(reset_statistics_ops, NULL, reset_statistics, "%llu\n"); + +static int init_debufs(void) +{ + struct dentry *show_dentry; + dir = debugfs_create_dir("oct_ilm", 0); + if (!dir) { + pr_err("oct_ilm: failed to create debugfs entry oct_ilm\n"); + return -1; + } + + show_dentry = debugfs_create_file("statistics", 0222, dir, NULL, + &oct_ilm_ops); + if (!show_dentry) { + pr_err("oct_ilm: failed to create debugfs entry oct_ilm/statistics\n"); + return -1; + } + + show_dentry = debugfs_create_file("reset", 0222, dir, NULL, + &reset_statistics_ops); + if (!show_dentry) { + pr_err("oct_ilm: failed to create debugfs entry oct_ilm/reset\n"); + return -1; + } + + return 0; + +} + +static void init_latency_info(struct latency_info *li, int startup) +{ + /* interval in milli seconds after which the interrupt will + * be triggered + */ + int interval = 1; + + if (startup) { + /* Calculating by the amounts io clock and cpu clock would + * increment in interval amount of ms + */ + li->io_interval = (octeon_get_io_clock_rate() * interval) / 1000; + li->cpu_interval = (octeon_get_clock_rate() * interval) / 1000; + } + li->timer_start1 = 0; + li->timer_start2 = 0; + li->max_latency = 0; + li->min_latency = (u64)-1; + li->latency_sum = 0; + li->interrupt_cnt = 0; +} + + +static void start_timer(int timer, u64 interval) +{ + union cvmx_ciu_timx timx; + unsigned long flags; + + timx.u64 = 0; + timx.s.one_shot = 1; + timx.s.len = interval; + raw_local_irq_save(flags); + li.timer_start1 = read_c0_cvmcount(); + cvmx_write_csr(CVMX_CIU_TIMX(timer), timx.u64); + /* Read it back to force wait until register is written. */ + timx.u64 = cvmx_read_csr(CVMX_CIU_TIMX(timer)); + li.timer_start2 = read_c0_cvmcount(); + raw_local_irq_restore(flags); +} + + +static irqreturn_t cvm_oct_ciu_timer_interrupt(int cpl, void *dev_id) +{ + u64 last_latency; + u64 last_int_cnt; + + if (reset_stats) { + init_latency_info(&li, 0); + reset_stats = false; + } else { + last_int_cnt = read_c0_cvmcount(); + last_latency = last_int_cnt - (li.timer_start1 + li.cpu_interval); + li.interrupt_cnt++; + li.latency_sum += last_latency; + if (last_latency > li.max_latency) + li.max_latency = last_latency; + if (last_latency < li.min_latency) + li.min_latency = last_latency; + } + start_timer(TIMER_NUM, li.io_interval); + return IRQ_HANDLED; +} + +static void disable_timer(int timer) +{ + union cvmx_ciu_timx timx; + + timx.s.one_shot = 0; + timx.s.len = 0; + cvmx_write_csr(CVMX_CIU_TIMX(timer), timx.u64); + /* Read it back to force immediate write of timer register*/ + timx.u64 = cvmx_read_csr(CVMX_CIU_TIMX(timer)); +} + +static __init int oct_ilm_module_init(void) +{ + int rc; + int irq = OCTEON_IRQ_TIMER0 + TIMER_NUM; + + rc = init_debufs(); + if (rc) { + WARN(1, "Could not create debugfs entries"); + return rc; + } + + rc = request_irq(irq, cvm_oct_ciu_timer_interrupt, IRQF_NO_THREAD, + "oct_ilm", 0); + if (rc) { + WARN(1, "Could not acquire IRQ %d", irq); + goto err_irq; + } + + init_latency_info(&li, 1); + start_timer(TIMER_NUM, li.io_interval); + + return 0; +err_irq: + debugfs_remove_recursive(dir); + return rc; +} + +static __exit void oct_ilm_module_exit(void) +{ + disable_timer(TIMER_NUM); + if (dir) + debugfs_remove_recursive(dir); + free_irq(OCTEON_IRQ_TIMER0 + TIMER_NUM, 0); +} + +module_exit(oct_ilm_module_exit); +module_init(oct_ilm_module_init); +MODULE_AUTHOR("Venkat Subbiah, Cavium"); +MODULE_DESCRIPTION("Measures interrupt latency on Octeon chips."); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 46f5dbc..156aa61 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -1542,7 +1542,7 @@ static bool octeon_irq_ciu2_is_edge(unsigned int line, unsigned int bit) if (line == 3) /* MIO */ switch (bit) { - case 2: /* IPD_DRP */ + case 2: /* IPD_DRP */ case 8 ... 11: /* Timers */ case 48: /* PTP */ edge = true; @@ -1553,7 +1553,7 @@ static bool octeon_irq_ciu2_is_edge(unsigned int line, unsigned int bit) else if (line == 6) /* PKT */ switch (bit) { case 52 ... 53: /* ILK_DRP */ - case 8 ... 12: /* GMX_DRP */ + case 8 ... 12: /* GMX_DRP */ edge = true; break; default: diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S index 0ba0eb9..64e08df 100644 --- a/arch/mips/cavium-octeon/octeon-memcpy.S +++ b/arch/mips/cavium-octeon/octeon-memcpy.S @@ -116,15 +116,15 @@ #ifdef CONFIG_CPU_LITTLE_ENDIAN #define LDFIRST LOADR -#define LDREST LOADL +#define LDREST LOADL #define STFIRST STORER -#define STREST STOREL +#define STREST STOREL #define SHIFT_DISCARD SLLV #else #define LDFIRST LOADL -#define LDREST LOADR +#define LDREST LOADR #define STFIRST STOREL -#define STREST STORER +#define STREST STORER #define SHIFT_DISCARD SRLV #endif @@ -316,9 +316,9 @@ EXC( STORE t0, -8(dst), s_exc_p1u) src_unaligned: #define rem t8 - SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter + SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter beqz t0, cleanup_src_unaligned - and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES + and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES 1: /* * Avoid consecutive LD*'s to the same register since some mips @@ -326,13 +326,13 @@ src_unaligned: * It's OK to load FIRST(N+1) before REST(N) because the two addresses * are to the same unit (unless src is aligned, but it's not). */ -EXC( LDFIRST t0, FIRST(0)(src), l_exc) -EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy) - SUB len, len, 4*NBYTES +EXC( LDFIRST t0, FIRST(0)(src), l_exc) +EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy) + SUB len, len, 4*NBYTES EXC( LDREST t0, REST(0)(src), l_exc_copy) EXC( LDREST t1, REST(1)(src), l_exc_copy) -EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy) -EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy) +EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy) +EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy) EXC( LDREST t2, REST(2)(src), l_exc_copy) EXC( LDREST t3, REST(3)(src), l_exc_copy) ADD src, src, 4*NBYTES diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index 3c1b625..389512e 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -410,7 +410,7 @@ int __init octeon_prune_device_tree(void) pip_path = fdt_getprop(initial_boot_params, aliases, "pip", NULL); if (pip_path) { int pip = fdt_path_offset(initial_boot_params, pip_path); - if (pip >= 0) + if (pip >= 0) for (i = 0; i <= 4; i++) octeon_fdt_pip_iface(pip, i, &mac_addr_base); } diff --git a/arch/mips/cavium-octeon/octeon_3xxx.dts b/arch/mips/cavium-octeon/octeon_3xxx.dts index f28b2d0..88cb42d 100644 --- a/arch/mips/cavium-octeon/octeon_3xxx.dts +++ b/arch/mips/cavium-octeon/octeon_3xxx.dts @@ -3,7 +3,7 @@ * OCTEON 3XXX, 5XXX, 63XX device tree skeleton. * * This device tree is pruned and patched by early boot code before - * use. Because of this, it contains a super-set of the available + * use. Because of this, it contains a super-set of the available * devices and properties. */ / { @@ -433,12 +433,12 @@ cavium,t-we = <45>; cavium,t-rd-hld = <35>; cavium,t-wr-hld = <45>; - cavium,t-pause = <0>; - cavium,t-wait = <0>; - cavium,t-page = <35>; + cavium,t-pause = <0>; + cavium,t-wait = <0>; + cavium,t-page = <35>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <8>; }; cavium,cs-config@4 { @@ -450,12 +450,12 @@ cavium,t-we = <320>; cavium,t-rd-hld = <320>; cavium,t-wr-hld = <320>; - cavium,t-pause = <320>; - cavium,t-wait = <320>; - cavium,t-page = <320>; + cavium,t-pause = <320>; + cavium,t-wait = <320>; + cavium,t-page = <320>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <8>; }; cavium,cs-config@5 { @@ -467,12 +467,12 @@ cavium,t-we = <150>; cavium,t-rd-hld = <100>; cavium,t-wr-hld = <30>; - cavium,t-pause = <0>; - cavium,t-wait = <30>; - cavium,t-page = <320>; + cavium,t-pause = <0>; + cavium,t-wait = <30>; + cavium,t-page = <320>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <16>; }; cavium,cs-config@6 { @@ -484,12 +484,12 @@ cavium,t-we = <150>; cavium,t-rd-hld = <100>; cavium,t-wr-hld = <70>; - cavium,t-pause = <0>; - cavium,t-wait = <0>; - cavium,t-page = <320>; + cavium,t-pause = <0>; + cavium,t-wait = <0>; + cavium,t-page = <320>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,wait-mode; cavium,bus-width = <16>; }; diff --git a/arch/mips/cavium-octeon/octeon_68xx.dts b/arch/mips/cavium-octeon/octeon_68xx.dts index 1839468..79b46fc 100644 --- a/arch/mips/cavium-octeon/octeon_68xx.dts +++ b/arch/mips/cavium-octeon/octeon_68xx.dts @@ -3,7 +3,7 @@ * OCTEON 68XX device tree skeleton. * * This device tree is pruned and patched by early boot code before - * use. Because of this, it contains a super-set of the available + * use. Because of this, it contains a super-set of the available * devices and properties. */ / { @@ -469,12 +469,12 @@ cavium,t-we = <35>; cavium,t-rd-hld = <25>; cavium,t-wr-hld = <35>; - cavium,t-pause = <0>; - cavium,t-wait = <300>; - cavium,t-page = <25>; + cavium,t-pause = <0>; + cavium,t-wait = <300>; + cavium,t-page = <25>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <8>; }; cavium,cs-config@4 { @@ -486,12 +486,12 @@ cavium,t-we = <320>; cavium,t-rd-hld = <320>; cavium,t-wr-hld = <320>; - cavium,t-pause = <320>; - cavium,t-wait = <320>; - cavium,t-page = <320>; + cavium,t-pause = <320>; + cavium,t-wait = <320>; + cavium,t-page = <320>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <8>; }; cavium,cs-config@5 { @@ -503,12 +503,12 @@ cavium,t-we = <150>; cavium,t-rd-hld = <100>; cavium,t-wr-hld = <300>; - cavium,t-pause = <0>; - cavium,t-wait = <300>; - cavium,t-page = <310>; + cavium,t-pause = <0>; + cavium,t-wait = <300>; + cavium,t-page = <310>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <16>; }; cavium,cs-config@6 { @@ -520,12 +520,12 @@ cavium,t-we = <150>; cavium,t-rd-hld = <100>; cavium,t-wr-hld = <30>; - cavium,t-pause = <0>; - cavium,t-wait = <30>; - cavium,t-page = <310>; + cavium,t-pause = <0>; + cavium,t-wait = <30>; + cavium,t-page = <310>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,wait-mode; cavium,bus-width = <16>; }; diff --git a/arch/mips/cavium-octeon/octeon_boot.h b/arch/mips/cavium-octeon/octeon_boot.h index 428864b..7b066bb 100644 --- a/arch/mips/cavium-octeon/octeon_boot.h +++ b/arch/mips/cavium-octeon/octeon_boot.h @@ -31,7 +31,7 @@ struct boot_init_vector { uint32_t k0_val; /* Address of boot info block structure */ uint64_t boot_info_addr; - uint32_t flags; /* flags */ + uint32_t flags; /* flags */ uint32_t pad; }; @@ -53,20 +53,20 @@ struct linux_app_boot_info { /* If not to copy a lot of bootloader's structures here is only offset of requested member */ -#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK 0x765c +#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK 0x765c /* hardcoded in bootloader */ -#define LABI_ADDR_IN_BOOTLOADER 0x700 +#define LABI_ADDR_IN_BOOTLOADER 0x700 #define LINUX_APP_BOOT_BLOCK_NAME "linux-app-boot" #define LABI_SIGNATURE 0xAABBCC01 /* from uboot-headers/octeon_mem_map.h */ -#define EXCEPTION_BASE_INCR (4 * 1024) +#define EXCEPTION_BASE_INCR (4 * 1024) /* Increment size for exception base addresses (4k minimum) */ -#define EXCEPTION_BASE_BASE 0 -#define BOOTLOADER_PRIV_DATA_BASE (EXCEPTION_BASE_BASE + 0x800) -#define BOOTLOADER_BOOT_VECTOR (BOOTLOADER_PRIV_DATA_BASE) +#define EXCEPTION_BASE_BASE 0 +#define BOOTLOADER_PRIV_DATA_BASE (EXCEPTION_BASE_BASE + 0x800) +#define BOOTLOADER_BOOT_VECTOR (BOOTLOADER_PRIV_DATA_BASE) #endif /* __OCTEON_BOOT_H__ */ diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index d7e0a09..c594a3d 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -319,7 +319,7 @@ EXPORT_SYMBOL(octeon_get_io_clock_rate); * exists on most Cavium evaluation boards. If it doesn't exist, then * this function doesn't do anything. * - * @s: String to write + * @s: String to write */ void octeon_write_lcd(const char *s) { @@ -341,7 +341,7 @@ void octeon_write_lcd(const char *s) /** * Return the console uart passed by the bootloader * - * Returns uart (0 or 1) + * Returns uart (0 or 1) */ int octeon_get_boot_uart(void) { @@ -805,7 +805,7 @@ void __init prom_init(void) /* * To do: switch parsing to new style, something like: * parse_crashkernel(arg, sysinfo->system_dram_size, - * &crashk_size, &crashk_base); + * &crashk_size, &crashk_base); */ #endif } else if (strlen(arcs_cmdline) + strlen(arg) + 1 < @@ -1013,7 +1013,7 @@ void __init plat_mem_setup(void) } /* - * Emit one character to the boot UART. Exported for use by the + * Emit one character to the boot UART. Exported for use by the * watchdog timer. */ int prom_putchar(char c) diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index ee1fb9f..295137d 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -55,7 +55,7 @@ static irqreturn_t mailbox_interrupt(int irq, void *dev_id) /** * Cause the function described by call_data to be executed on the passed - * cpu. When the function has finished, increment the finished field of + * cpu. When the function has finished, increment the finished field of * call_data. */ void octeon_send_ipi_single(int cpu, unsigned int action) @@ -126,8 +126,8 @@ static void octeon_smp_setup(void) #ifdef CONFIG_HOTPLUG_CPU /* - * The possible CPUs are all those present on the chip. We - * will assign CPU numbers for possible cores as well. Cores + * The possible CPUs are all those present on the chip. We + * will assign CPU numbers for possible cores as well. Cores * are always consecutively numberd from 0. */ for (id = 0; id < num_cores && id < NR_CPUS; id++) { @@ -332,7 +332,7 @@ extern void kernel_entry(unsigned long arg1, ...); static void start_after_reset(void) { - kernel_entry(0, 0, 0); /* set a2 = 0 for secondary core */ + kernel_entry(0, 0, 0); /* set a2 = 0 for secondary core */ } static int octeon_update_boot_vector(unsigned int cpu) @@ -401,7 +401,7 @@ static int __cpuinit register_cavium_notifier(void) } late_initcall(register_cavium_notifier); -#endif /* CONFIG_HOTPLUG_CPU */ +#endif /* CONFIG_HOTPLUG_CPU */ struct plat_smp_ops octeon_smp_ops = { .send_ipi_single = octeon_send_ipi_single, diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c index d3ce6fa..32265f5 100644 --- a/arch/mips/cobalt/led.c +++ b/arch/mips/cobalt/led.c @@ -1,7 +1,7 @@ /* * Registration of Cobalt LED platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c index 691d620..8db7b5d 100644 --- a/arch/mips/cobalt/mtd.c +++ b/arch/mips/cobalt/mtd.c @@ -25,7 +25,7 @@ static struct mtd_partition cobalt_mtd_partitions[] = { { .name = "firmware", - .offset = 0x0, + .offset = 0x0, .size = 0x80000, }, }; diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c index 3ab3989..a6bc75a 100644 --- a/arch/mips/cobalt/rtc.c +++ b/arch/mips/cobalt/rtc.c @@ -46,7 +46,7 @@ static __init int cobalt_rtc_add(void) return -ENOMEM; retval = platform_device_add_resources(pdev, cobalt_rtc_resource, - ARRAY_SIZE(cobalt_rtc_resource)); + ARRAY_SIZE(cobalt_rtc_resource)); if (retval) goto err_free_device; diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig index ea87d43..e3a3836 100644 --- a/arch/mips/configs/ath79_defconfig +++ b/arch/mips/configs/ath79_defconfig @@ -1,5 +1,6 @@ CONFIG_ATH79=y CONFIG_ATH79_MACH_AP121=y +CONFIG_ATH79_MACH_AP136=y CONFIG_ATH79_MACH_AP81=y CONFIG_ATH79_MACH_DB120=y CONFIG_ATH79_MACH_PB44=y diff --git a/arch/mips/configs/pnx8550_jbs_defconfig b/arch/mips/configs/pnx8550_jbs_defconfig deleted file mode 100644 index 1d1f206..0000000 --- a/arch/mips/configs/pnx8550_jbs_defconfig +++ /dev/null @@ -1,98 +0,0 @@ -CONFIG_PNX8550_JBS=y -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_PCI=y -CONFIG_PM=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SGI_IOC4=m -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=m -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_OFFBOARD=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_IT8213=m -CONFIG_BLK_DEV_TC86C001=m -CONFIG_SCSI=y -CONFIG_SCSI_TGT=m -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_FC_ATTRS=y -CONFIG_ISCSI_TCP=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set -CONFIG_8139TOO_TUNE_TWISTER=y -CONFIG_8139TOO_8129=y -CONFIG_CHELSIO_T3=m -CONFIG_NETXEN_NIC=m -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIAL_PNX8XXX=y -CONFIG_SERIAL_PNX8XXX_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_USBAT=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_DLM=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_SLAB=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRC_CCITT=m diff --git a/arch/mips/configs/pnx8550_stb810_defconfig b/arch/mips/configs/pnx8550_stb810_defconfig deleted file mode 100644 index 15c66a5..0000000 --- a/arch/mips/configs/pnx8550_stb810_defconfig +++ /dev/null @@ -1,92 +0,0 @@ -CONFIG_PNX8550_STB810=y -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_HOTPLUG is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_PCI=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=m -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_OFFBOARD=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_HPT366=y -CONFIG_BLK_DEV_IT8213=m -CONFIG_BLK_DEV_TC86C001=m -CONFIG_SCSI=y -CONFIG_SCSI_TGT=m -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_ISCSI_TCP=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_NET_PCI=y -CONFIG_NATSEMI=y -CONFIG_CHELSIO_T3=m -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_HW_RANDOM=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_USBAT=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_DLM=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_HEADERS_CHECK=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_SLAB=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRC_CCITT=m diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig new file mode 100644 index 0000000..d1741bc --- /dev/null +++ b/arch/mips/configs/rt305x_defconfig @@ -0,0 +1,167 @@ +CONFIG_RALINK=y +CONFIG_DTB_RT305X_EVAL=y +CONFIG_CPU_MIPS32_R2=y +# CONFIG_COMPACTION is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_HZ_100=y +# CONFIG_SECCOMP is not set +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INITRAMFS_ROOT_UID=1000 +CONFIG_INITRAMFS_ROOT_GID=1000 +# CONFIG_RD_GZIP is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_AIO is not set +CONFIG_EMBEDDED=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_COREDUMP is not set +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_BRIDGE_NETFILTER is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NF_CONNTRACK_IPV4=m +# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_RAW=m +CONFIG_BRIDGE=y +# CONFIG_BRIDGE_IGMP_SNOOPING is not set +CONFIG_VLAN_8021Q=y +CONFIG_NET_SCHED=y +CONFIG_HAMRADIO=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y +CONFIG_EEPROM_93CX6=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_PHYLIB=y +CONFIG_PPP=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m +CONFIG_PPP_ASYNC=m +CONFIG_ISDN=y +CONFIG_INPUT=m +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_MISC=y +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SPI=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_HID is not set +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_DEBUG=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_STAGING=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_XATTR=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +# CONFIG_JFFS2_FS_POSIX_ACL is not set +# CONFIG_JFFS2_FS_SECURITY is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +# CONFIG_JFFS2_ZLIB is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_ZLIB is not set +CONFIG_SQUASHFS_XZ=y +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_FTRACE is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRC_ITU_T=m +CONFIG_CRC32_SARWATE=y +# CONFIG_XZ_DEC_X86 is not set +# CONFIG_XZ_DEC_POWERPC is not set +# CONFIG_XZ_DEC_IA64 is not set +# CONFIG_XZ_DEC_ARM is not set +# CONFIG_XZ_DEC_ARMTHUMB is not set +# CONFIG_XZ_DEC_SPARC is not set +CONFIG_AVERAGE=y diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index 82c85281..22afed1 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -55,70 +55,70 @@ * DS2100/3100's, aka kn01, aka Pmax: * * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 SCSI - * 3 Lance Ethernet - * 4 DZ11 serial - * 5 RTC - * 6 Memory Controller & Video - * 7 FPU + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 SCSI + * 3 Lance Ethernet + * 4 DZ11 serial + * 5 RTC + * 6 Memory Controller & Video + * 7 FPU * * DS5000/200, aka kn02, aka 3max: * * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 TurboChannel - * 3 RTC - * 4 Reserved - * 5 Memory Controller - * 6 Reserved - * 7 FPU + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 TurboChannel + * 3 RTC + * 4 Reserved + * 5 Memory Controller + * 6 Reserved + * 7 FPU * * DS5000/1xx's, aka kn02ba, aka 3min: * * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 TurboChannel Slot 0 - * 3 TurboChannel Slot 1 - * 4 TurboChannel Slot 2 - * 5 TurboChannel Slot 3 (ASIC) - * 6 Halt button - * 7 FPU/R4k timer + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 TurboChannel Slot 0 + * 3 TurboChannel Slot 1 + * 4 TurboChannel Slot 2 + * 5 TurboChannel Slot 3 (ASIC) + * 6 Halt button + * 7 FPU/R4k timer * * DS5000/2x's, aka kn02ca, aka maxine: * * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Periodic Interrupt (100usec) - * 3 RTC - * 4 I/O write timeout - * 5 TurboChannel (ASIC) - * 6 Halt Keycode from Access.Bus keyboard (CTRL-ALT-ENTER) - * 7 FPU/R4k timer + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Periodic Interrupt (100usec) + * 3 RTC + * 4 I/O write timeout + * 5 TurboChannel (ASIC) + * 6 Halt Keycode from Access.Bus keyboard (CTRL-ALT-ENTER) + * 7 FPU/R4k timer * * DS5000/2xx's, aka kn03, aka 3maxplus: * * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 System Board (ASIC) - * 3 RTC - * 4 Reserved - * 5 Memory - * 6 Halt Button - * 7 FPU/R4k timer + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 System Board (ASIC) + * 3 RTC + * 4 Reserved + * 5 Memory + * 6 Halt Button + * 7 FPU/R4k timer * * We handle the IRQ according to _our_ priority (see setup.c), - * then we just return. If multiple IRQs are pending then we will + * then we just return. If multiple IRQs are pending then we will * just take another exception, big deal. */ .align 5 @@ -146,7 +146,7 @@ /* * Find irq with highest priority */ - PTR_LA t1,cpu_mask_nr_tbl + PTR_LA t1,cpu_mask_nr_tbl 1: lw t2,(t1) nop and t2,t0 @@ -195,7 +195,7 @@ /* * Find irq with highest priority */ - PTR_LA t1,asic_mask_nr_tbl + PTR_LA t1,asic_mask_nr_tbl 2: lw t2,(t1) nop and t2,t0 @@ -221,7 +221,7 @@ FEXPORT(cpu_all_int) # HALT, timers, software junk li a0,DEC_CPU_IRQ_BASE srl t0,CAUSEB_IP - li t1,CAUSEF_IP>>CAUSEB_IP # mask + li t1,CAUSEF_IP>>CAUSEB_IP # mask b 1f li t2,4 # nr of bits / 2 diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c index ebb73c5..f434b75 100644 --- a/arch/mips/dec/kn02xa-berr.c +++ b/arch/mips/dec/kn02xa-berr.c @@ -128,8 +128,8 @@ void __init dec_kn02xa_be_init(void) { volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR); - /* For KN04 we need to make sure EE (?) is enabled in the MB. */ - if (current_cpu_type() == CPU_R4000SC) + /* For KN04 we need to make sure EE (?) is enabled in the MB. */ + if (current_cpu_type() == CPU_R4000SC) *mbcs |= KN4K_MB_CSR_EE; fast_iob(); diff --git a/arch/mips/dec/prom/call_o32.S b/arch/mips/dec/prom/call_o32.S index 8c84981..c0d1522 100644 --- a/arch/mips/dec/prom/call_o32.S +++ b/arch/mips/dec/prom/call_o32.S @@ -14,7 +14,7 @@ /* Maximum number of arguments supported. Must be even! */ #define O32_ARGC 32 -/* Number of static registers we save. */ +/* Number of static registers we save. */ #define O32_STATC 11 /* Frame size for both of the above. */ #define O32_FRAMESZ (4 * O32_ARGC + SZREG * O32_STATC) diff --git a/arch/mips/dec/prom/dectypes.h b/arch/mips/dec/prom/dectypes.h index 707b6f1..69ea5b9 100644 --- a/arch/mips/dec/prom/dectypes.h +++ b/arch/mips/dec/prom/dectypes.h @@ -1,5 +1,5 @@ #ifndef DECTYPES -#define DECTYPES +#define DECTYPES #define DS2100_3100 1 /* DS2100/3100 Pmax */ #define DS5000_200 2 /* DS5000/200 3max */ diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c index 93f1239..ab16904 100644 --- a/arch/mips/dec/prom/init.c +++ b/arch/mips/dec/prom/init.c @@ -103,7 +103,7 @@ void __init prom_init(void) if (prom_is_rex(magic)) rex_clear_cache(); - /* Register the early console. */ + /* Register the early console. */ register_prom_console(); /* Were we compiled with the right CPU option? */ diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c index 8c62316..0aadac7 100644 --- a/arch/mips/dec/prom/memory.c +++ b/arch/mips/dec/prom/memory.c @@ -22,7 +22,7 @@ volatile unsigned long mem_err; /* So we know an error occurred */ /* * Probe memory in 4MB chunks, waiting for an error to tell us we've fallen - * off the end of real memory. Only suitable for the 2100/3100's (PMAX). + * off the end of real memory. Only suitable for the 2100/3100's (PMAX). */ #define CHUNK_SIZE 0x400000 diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index b874accd..741cb42 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -65,7 +65,7 @@ EXPORT_SYMBOL(ioasic_base); /* * IRQ routing and priority tables. Priorites are set as follows: * - * KN01 KN230 KN02 KN02-BA KN02-CA KN03 + * KN01 KN230 KN02 KN02-BA KN02-CA KN03 * * MEMORY CPU CPU CPU ASIC CPU CPU * RTC CPU CPU CPU ASIC CPU CPU @@ -413,7 +413,7 @@ static void __init dec_init_kn02(void) /* * Machine-specific initialisation for KN02-BA, aka DS5000/1xx - * (xx = 20, 25, 33), aka 3min. Also applies to KN04(-BA), aka + * (xx = 20, 25, 33), aka 3min. Also applies to KN04(-BA), aka * DS5000/150, aka 4min. */ static int kn02ba_interrupt[DEC_NR_INTS] __initdata = { diff --git a/arch/mips/dec/wbflush.c b/arch/mips/dec/wbflush.c index 43feddd..56bda4a 100644 --- a/arch/mips/dec/wbflush.c +++ b/arch/mips/dec/wbflush.c @@ -2,9 +2,9 @@ * Setup the right wbflush routine for the different DECstations. * * Created with information from: - * DECstation 3100 Desktop Workstation Functional Specification - * DECstation 5000/200 KN02 System Module Functional Specification - * mipsel-linux-objdump --disassemble vmunix | grep "wbflush" :-) + * DECstation 3100 Desktop Workstation Functional Specification + * DECstation 5000/200 KN02 System Module Functional Specification + * mipsel-linux-objdump --disassemble vmunix | grep "wbflush" :-) * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c index b5f0825..b880a83 100644 --- a/arch/mips/emma/markeins/irq.c +++ b/arch/mips/emma/markeins/irq.c @@ -292,7 +292,7 @@ void __init arch_init_irq(void) asmlinkage void plat_irq_dispatch(void) { - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; if (pending & STATUSF_IP7) do_IRQ(MIPS_CPU_IRQ_BASE + 7); diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c index b05b08b..99ea004 100644 --- a/arch/mips/emma/markeins/platform.c +++ b/arch/mips/emma/markeins/platform.c @@ -190,7 +190,7 @@ static struct platform_device markeins_flash_device = { .name = "physmap-flash", .id = 0, .dev = { - .platform_data = &markeins_flash_data, + .platform_data = &markeins_flash_data, }, .num_resources = 1, .resource = &markeins_flash_resource, diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c index feceebc..d710058 100644 --- a/arch/mips/emma/markeins/setup.c +++ b/arch/mips/emma/markeins/setup.c @@ -28,7 +28,7 @@ #include <asm/emma/emma2rh.h> -#define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */ +#define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */ extern void markeins_led(const char *); diff --git a/arch/mips/fw/arc/file.c b/arch/mips/fw/arc/file.c index 3033534..a8b0803 100644 --- a/arch/mips/fw/arc/file.c +++ b/arch/mips/fw/arc/file.c @@ -15,7 +15,7 @@ LONG ArcGetDirectoryEntry(ULONG FileID, struct linux_vdirent *Buffer, - ULONG N, ULONG *Count) + ULONG N, ULONG *Count) { return ARC_CALL4(get_vdirent, FileID, Buffer, N, Count); } @@ -69,7 +69,7 @@ ArcGetFileInformation(ULONG FileID, struct linux_finfo *Information) } LONG ArcSetFileInformation(ULONG FileID, ULONG AttributeFlags, - ULONG AttributeMask) + ULONG AttributeMask) { return ARC_CALL3(set_finfo, FileID, AttributeFlags, AttributeMask); } diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c index 54a33c7..f90266c 100644 --- a/arch/mips/fw/arc/identify.c +++ b/arch/mips/fw/arc/identify.c @@ -100,7 +100,7 @@ void __init prom_identify_arch(void) if (p == NULL) { #ifdef CONFIG_SGI_IP27 /* IP27 PROM misbehaves, seems to not implement ARC - GetChild(). So we just assume it's an IP27. */ + GetChild(). So we just assume it's an IP27. */ iname = "SGI-IP27"; #else iname = "Unknown"; diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c index 8b8eea2..5537b94 100644 --- a/arch/mips/fw/arc/memory.c +++ b/arch/mips/fw/arc/memory.c @@ -1,6 +1,6 @@ /* * memory.c: PROM library functions for acquiring/using memory descriptors - * given to us from the ARCS firmware. + * given to us from the ARCS firmware. * * Copyright (C) 1996 by David S. Miller * Copyright (C) 1999, 2000, 2001 by Ralf Baechle diff --git a/arch/mips/fw/arc/promlib.c b/arch/mips/fw/arc/promlib.c index b7f9dd3..7e8ba5c 100644 --- a/arch/mips/fw/arc/promlib.c +++ b/arch/mips/fw/arc/promlib.c @@ -11,7 +11,7 @@ #include <asm/bcache.h> /* - * IP22 boardcache is not compatible with board caches. Thus we disable it + * IP22 boardcache is not compatible with board caches. Thus we disable it * during romvec action. Since r4xx0.c is always compiled and linked with your * kernel, this shouldn't cause any harm regardless what MIPS processor you * have. diff --git a/arch/mips/fw/lib/call_o32.S b/arch/mips/fw/lib/call_o32.S index e0a68713..b308b2a 100644 --- a/arch/mips/fw/lib/call_o32.S +++ b/arch/mips/fw/lib/call_o32.S @@ -14,7 +14,7 @@ /* Maximum number of arguments supported. Must be even! */ #define O32_ARGC 32 -/* Number of static registers we save. */ +/* Number of static registers we save. */ #define O32_STATC 11 /* Frame size for static register */ #define O32_FRAMESZ (SZREG * O32_STATC) diff --git a/arch/mips/fw/sni/sniprom.c b/arch/mips/fw/sni/sniprom.c index 96ba992..2c2cb18 100644 --- a/arch/mips/fw/sni/sniprom.c +++ b/arch/mips/fw/sni/sniprom.c @@ -28,20 +28,20 @@ * registers */ #define PROM_GET_MEMCONF 58 -#define PROM_GET_HWCONF 61 +#define PROM_GET_HWCONF 61 #define PROM_VEC (u64 *)CKSEG1ADDR(0x1fc00000) #define PROM_ENTRY(x) (PROM_VEC + (x)) -#define ___prom_putchar ((int *(*)(int))PROM_ENTRY(PROM_PUTCHAR)) -#define ___prom_getenv ((char *(*)(char *))PROM_ENTRY(PROM_GETENV)) -#define ___prom_get_memconf ((void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF)) -#define ___prom_get_hwconf ((u32 (*)(void))PROM_ENTRY(PROM_GET_HWCONF)) +#define ___prom_putchar ((int *(*)(int))PROM_ENTRY(PROM_PUTCHAR)) +#define ___prom_getenv ((char *(*)(char *))PROM_ENTRY(PROM_GETENV)) +#define ___prom_get_memconf ((void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF)) +#define ___prom_get_hwconf ((u32 (*)(void))PROM_ENTRY(PROM_GET_HWCONF)) #ifdef CONFIG_64BIT static u8 o32_stk[16384]; -#define O32_STK &o32_stk[sizeof(o32_stk)] +#define O32_STK &o32_stk[sizeof(o32_stk)] #define __PROM_O32(fun, arg) fun arg __asm__(#fun); \ __asm__(#fun " = call_o32") @@ -52,13 +52,13 @@ void __PROM_O32(__prom_get_memconf, (void (*)(void *), void *, void *)); u32 __PROM_O32(__prom_get_hwconf, (u32 (*)(void), void *)); #define _prom_putchar(x) __prom_putchar(___prom_putchar, O32_STK, x) -#define _prom_getenv(x) __prom_getenv(___prom_getenv, O32_STK, x) +#define _prom_getenv(x) __prom_getenv(___prom_getenv, O32_STK, x) #define _prom_get_memconf(x) __prom_get_memconf(___prom_get_memconf, O32_STK, x) #define _prom_get_hwconf() __prom_get_hwconf(___prom_get_hwconf, O32_STK) #else #define _prom_putchar(x) ___prom_putchar(x) -#define _prom_getenv(x) ___prom_getenv(x) +#define _prom_getenv(x) ___prom_getenv(x) #define _prom_get_memconf(x) ___prom_get_memconf(x) #define _prom_get_hwconf(x) ___prom_get_hwconf(x) #endif diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h index 9252d9b..909bb69 100644 --- a/arch/mips/include/asm/abi.h +++ b/arch/mips/include/asm/abi.h @@ -14,12 +14,12 @@ struct mips_abi { int (* const setup_frame)(void *sig_return, struct k_sigaction *ka, - struct pt_regs *regs, int signr, - sigset_t *set); + struct pt_regs *regs, int signr, + sigset_t *set); const unsigned long signal_return_offset; int (* const setup_rt_frame)(void *sig_return, struct k_sigaction *ka, - struct pt_regs *regs, int signr, - sigset_t *set, siginfo_t *info); + struct pt_regs *regs, int signr, + sigset_t *set, siginfo_t *info); const unsigned long rt_signal_return_offset; const unsigned long restart; }; diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h index 569f80a..13d61c0 100644 --- a/arch/mips/include/asm/addrspace.h +++ b/arch/mips/include/asm/addrspace.h @@ -51,14 +51,14 @@ * Returns the physical address of a CKSEGx / XKPHYS address */ #define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) -#define XPHYSADDR(a) ((_ACAST64_(a)) & \ +#define XPHYSADDR(a) ((_ACAST64_(a)) & \ _CONST64_(0x000000ffffffffff)) #ifdef CONFIG_64BIT /* * Memory segments (64bit kernel mode addresses) - * The compatibility segments use the full 64-bit sign extended value. Note + * The compatibility segments use the full 64-bit sign extended value. Note * the R8000 doesn't have them so don't reference these in generic MIPS code. */ #define XKUSEG _CONST64_(0x0000000000000000) @@ -131,7 +131,7 @@ /* * The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting - * the region, 3 bits for the CCA mode. This leaves 59 bits of which the + * the region, 3 bits for the CCA mode. This leaves 59 bits of which the * R8000 implements most with its 48-bit physical address space. */ #define TO_PHYS_MASK _CONST64_(0x07ffffffffffffff) /* 2^^59 - 1 */ diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h index 608cfcf..164a21e 100644 --- a/arch/mips/include/asm/asm.h +++ b/arch/mips/include/asm/asm.h @@ -33,12 +33,12 @@ * Not used for the kernel but here seems to be the right place. */ #ifdef __PIC__ -#define CPRESTORE(register) \ +#define CPRESTORE(register) \ .cprestore register -#define CPADD(register) \ +#define CPADD(register) \ .cpadd register -#define CPLOAD(register) \ - .cpload register +#define CPLOAD(register) \ + .cpload register #else #define CPRESTORE(register) #define CPADD(register) @@ -48,35 +48,35 @@ /* * LEAF - declare leaf routine */ -#define LEAF(symbol) \ - .globl symbol; \ - .align 2; \ - .type symbol, @function; \ - .ent symbol, 0; \ +#define LEAF(symbol) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ symbol: .frame sp, 0, ra /* * NESTED - declare nested routine entry point */ -#define NESTED(symbol, framesize, rpc) \ - .globl symbol; \ - .align 2; \ - .type symbol, @function; \ - .ent symbol, 0; \ +#define NESTED(symbol, framesize, rpc) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ symbol: .frame sp, framesize, rpc /* * END - mark end of function */ -#define END(function) \ - .end function; \ +#define END(function) \ + .end function; \ .size function, .-function /* * EXPORT - export definition of symbol */ #define EXPORT(symbol) \ - .globl symbol; \ + .globl symbol; \ symbol: /* @@ -90,16 +90,16 @@ symbol: /* * ABS - export absolute symbol */ -#define ABS(symbol,value) \ - .globl symbol; \ +#define ABS(symbol,value) \ + .globl symbol; \ symbol = value -#define PANIC(msg) \ +#define PANIC(msg) \ .set push; \ - .set reorder; \ - PTR_LA a0, 8f; \ - jal panic; \ -9: b 9b; \ + .set reorder; \ + PTR_LA a0, 8f; \ + jal panic; \ +9: b 9b; \ .set pop; \ TEXT(msg) @@ -107,31 +107,31 @@ symbol = value * Print formatted string */ #ifdef CONFIG_PRINTK -#define PRINT(string) \ +#define PRINT(string) \ .set push; \ - .set reorder; \ - PTR_LA a0, 8f; \ - jal printk; \ + .set reorder; \ + PTR_LA a0, 8f; \ + jal printk; \ .set pop; \ TEXT(string) #else #define PRINT(string) #endif -#define TEXT(msg) \ +#define TEXT(msg) \ .pushsection .data; \ -8: .asciiz msg; \ +8: .asciiz msg; \ .popsection; /* * Build text tables */ -#define TTABLE(string) \ +#define TTABLE(string) \ .pushsection .text; \ - .word 1f; \ + .word 1f; \ .popsection \ .pushsection .data; \ -1: .asciiz string; \ +1: .asciiz string; \ .popsection /* @@ -143,13 +143,13 @@ symbol = value */ #ifdef CONFIG_CPU_HAS_PREFETCH -#define PREF(hint,addr) \ +#define PREF(hint,addr) \ .set push; \ .set mips4; \ pref hint, addr; \ .set pop -#define PREFX(hint,addr) \ +#define PREFX(hint,addr) \ .set push; \ .set mips4; \ prefx hint, addr; \ @@ -166,42 +166,42 @@ symbol = value * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs. */ #if (_MIPS_ISA == _MIPS_ISA_MIPS1) -#define MOVN(rd, rs, rt) \ +#define MOVN(rd, rs, rt) \ .set push; \ .set reorder; \ - beqz rt, 9f; \ - move rd, rs; \ + beqz rt, 9f; \ + move rd, rs; \ .set pop; \ 9: -#define MOVZ(rd, rs, rt) \ +#define MOVZ(rd, rs, rt) \ .set push; \ .set reorder; \ - bnez rt, 9f; \ - move rd, rs; \ + bnez rt, 9f; \ + move rd, rs; \ .set pop; \ 9: #endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */ #if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) -#define MOVN(rd, rs, rt) \ +#define MOVN(rd, rs, rt) \ .set push; \ .set noreorder; \ - bnezl rt, 9f; \ - move rd, rs; \ + bnezl rt, 9f; \ + move rd, rs; \ .set pop; \ 9: -#define MOVZ(rd, rs, rt) \ +#define MOVZ(rd, rs, rt) \ .set push; \ .set noreorder; \ - beqzl rt, 9f; \ - move rd, rs; \ + beqzl rt, 9f; \ + move rd, rs; \ .set pop; \ 9: #endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */ #if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \ (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64) -#define MOVN(rd, rs, rt) \ +#define MOVN(rd, rs, rt) \ movn rd, rs, rt -#define MOVZ(rd, rs, rt) \ +#define MOVZ(rd, rs, rt) \ movz rd, rs, rt #endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */ diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index 01cc6ba..08b6079 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -1,5 +1,5 @@ /* - * Atomic operations that C can't guarantee us. Useful for + * Atomic operations that C can't guarantee us. Useful for * resource counting etc.. * * But use these as seldom as possible since they are much more slower @@ -21,7 +21,7 @@ #include <asm/cmpxchg.h> #include <asm/war.h> -#define ATOMIC_INIT(i) { (i) } +#define ATOMIC_INIT(i) { (i) } /* * atomic_read - read atomic variable diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h index f7fdc24..314ab55 100644 --- a/arch/mips/include/asm/barrier.h +++ b/arch/mips/include/asm/barrier.h @@ -18,7 +18,7 @@ * over this barrier. All reads preceding this primitive are guaranteed * to access memory (but not necessarily other CPUs' caches) before any * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than + * any of the preceding reads. This primitive is much lighter weight than * rmb() on most CPUs, and is never heavier weight than is * rmb(). * @@ -43,7 +43,7 @@ * </programlisting> * * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, + * two reads are separated by a read_barrier_depends(). However, * the following code, with the same initial values for "a" and "b": * * <programlisting> @@ -57,7 +57,7 @@ * </programlisting> * * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such + * the read of "a" and the read of "b". Therefore, on some CPUs, such * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() * in cases like this where there are no data dependencies. */ @@ -92,7 +92,7 @@ : "memory") #ifdef CONFIG_CPU_CAVIUM_OCTEON # define OCTEON_SYNCW_STR ".set push\n.set arch=octeon\nsyncw\nsyncw\n.set pop\n" -# define __syncw() __asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory") +# define __syncw() __asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory") # define fast_wmb() __syncw() # define fast_rmb() barrier() @@ -158,7 +158,7 @@ #endif #if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP) -#define __WEAK_LLSC_MB " sync \n" +#define __WEAK_LLSC_MB " sync \n" #else #define __WEAK_LLSC_MB " \n" #endif diff --git a/arch/mips/include/asm/bcache.h b/arch/mips/include/asm/bcache.h index 0ba9d6e..8c34484 100644 --- a/arch/mips/include/asm/bcache.h +++ b/arch/mips/include/asm/bcache.h @@ -11,7 +11,7 @@ /* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent, - chipset implemented caches. On machines with other CPUs the CPU does the + chipset implemented caches. On machines with other CPUs the CPU does the cache thing itself. */ struct bcache_ops { void (*bc_enable)(void); diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index 46ac73a..71305a8 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -26,15 +26,15 @@ #define SZLONG_MASK 31UL #define __LL "ll " #define __SC "sc " -#define __INS "ins " -#define __EXT "ext " +#define __INS "ins " +#define __EXT "ext " #elif _MIPS_SZLONG == 64 #define SZLONG_LOG 6 #define SZLONG_MASK 63UL #define __LL "lld " #define __SC "scd " -#define __INS "dins " -#define __EXT "dext " +#define __INS "dins " +#define __EXT "dext " #endif /* @@ -357,7 +357,7 @@ static inline int test_and_clear_bit(unsigned long nr, "1: " __LL "%0, %1 # test_and_clear_bit \n" " or %2, %0, %3 \n" " xor %2, %3 \n" - " " __SC "%2, %1 \n" + " " __SC "%2, %1 \n" " beqzl %2, 1b \n" " and %2, %0, %3 \n" " .set mips0 \n" @@ -371,10 +371,10 @@ static inline int test_and_clear_bit(unsigned long nr, do { __asm__ __volatile__( - " " __LL "%0, %1 # test_and_clear_bit \n" + " " __LL "%0, %1 # test_and_clear_bit \n" " " __EXT "%2, %0, %3, 1 \n" - " " __INS "%0, $0, %3, 1 \n" - " " __SC "%0, %1 \n" + " " __INS "%0, $0, %3, 1 \n" + " " __SC "%0, %1 \n" : "=&r" (temp), "+m" (*m), "=&r" (res) : "ir" (bit) : "memory"); @@ -387,10 +387,10 @@ static inline int test_and_clear_bit(unsigned long nr, do { __asm__ __volatile__( " .set mips3 \n" - " " __LL "%0, %1 # test_and_clear_bit \n" + " " __LL "%0, %1 # test_and_clear_bit \n" " or %2, %0, %3 \n" " xor %2, %3 \n" - " " __SC "%2, %1 \n" + " " __SC "%2, %1 \n" " .set mips0 \n" : "=&r" (temp), "+m" (*m), "=&r" (res) : "r" (1UL << bit) @@ -444,7 +444,7 @@ static inline int test_and_change_bit(unsigned long nr, do { __asm__ __volatile__( " .set mips3 \n" - " " __LL "%0, %1 # test_and_change_bit \n" + " " __LL "%0, %1 # test_and_change_bit \n" " xor %2, %0, %3 \n" " " __SC "\t%2, %1 \n" " .set mips0 \n" diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 7a51d87..b71dd5b 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -44,19 +44,19 @@ /* * Valid machtype for group PMC-MSP */ -#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */ -#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */ -#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */ -#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */ -#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */ -#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ -#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ +#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */ +#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */ +#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */ +#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */ +#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */ +#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ +#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ /* * Valid machtype for group Mikrotik */ -#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ -#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ +#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ +#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ /* * Valid machtype for Loongson family @@ -67,7 +67,7 @@ #define MACH_LEMOTE_ML2F7 3 #define MACH_LEMOTE_YL2F89 4 #define MACH_DEXXON_GDIUM2F10 5 -#define MACH_LEMOTE_NAS 6 +#define MACH_LEMOTE_NAS 6 #define MACH_LEMOTE_LL2F 7 #define MACH_LOONGSON_END 8 diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h new file mode 100644 index 0000000..0ef1142 --- /dev/null +++ b/arch/mips/include/asm/break.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 2003 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + */ +#ifndef __ASM_BREAK_H +#define __ASM_BREAK_H + +#ifdef __UAPI_ASM_BREAK_H +#error "Error: Do not directly include <uapi/asm/break.h>" +#endif +#include <uapi/asm/break.h> + +/* + * Break codes used internally to the kernel. + */ +#define BRK_KDB 513 /* Used in KDB_ENTER() */ +#define BRK_MEMU 514 /* Used by FPU emulator */ +#define BRK_KPROBE_BP 515 /* Kprobe break */ +#define BRK_KPROBE_SSTEPBP 516 /* Kprobe single step software implementation */ +#define BRK_MULOVF 1023 /* Multiply overflow */ + +#endif /* __ASM_BREAK_H */ diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h index 8f99c11..68f37e3 100644 --- a/arch/mips/include/asm/cacheops.h +++ b/arch/mips/include/asm/cacheops.h @@ -8,20 +8,20 @@ * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle * (C) Copyright 1999 Silicon Graphics, Inc. */ -#ifndef __ASM_CACHEOPS_H -#define __ASM_CACHEOPS_H +#ifndef __ASM_CACHEOPS_H +#define __ASM_CACHEOPS_H /* * Cache Operations available on all MIPS processors with R4000-style caches */ -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 #define Index_Load_Tag_I 0x04 #define Index_Load_Tag_D 0x05 #define Index_Store_Tag_I 0x08 #define Index_Store_Tag_D 0x09 #if defined(CONFIG_CPU_LOONGSON2) -#define Hit_Invalidate_I 0x00 +#define Hit_Invalidate_I 0x00 #else #define Hit_Invalidate_I 0x10 #endif @@ -39,8 +39,8 @@ /* * R4000SC and R4400SC-specific cacheops */ -#define Index_Invalidate_SI 0x02 -#define Index_Writeback_Inv_SD 0x03 +#define Index_Invalidate_SI 0x02 +#define Index_Writeback_Inv_SD 0x03 #define Index_Load_Tag_SI 0x06 #define Index_Load_Tag_SD 0x07 #define Index_Store_Tag_SI 0x0A diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h index f2f7c6c..ac3d2b8 100644 --- a/arch/mips/include/asm/checksum.h +++ b/arch/mips/include/asm/checksum.h @@ -194,7 +194,7 @@ static inline __sum16 ip_compute_csum(const void *buff, int len) #define _HAVE_ARCH_IPV6_CSUM static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, + const struct in6_addr *daddr, __u32 len, unsigned short proto, __wsum sum) { diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index eee10dc..466069b 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -146,7 +146,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz " .set push \n" \ " .set noat \n" \ " .set mips3 \n" \ - "1: " ld " %0, %2 # __cmpxchg_asm \n" \ + "1: " ld " %0, %2 # __cmpxchg_asm \n" \ " bne %0, %z3, 2f \n" \ " .set mips0 \n" \ " move $1, %z4 \n" \ @@ -163,7 +163,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz " .set push \n" \ " .set noat \n" \ " .set mips3 \n" \ - "1: " ld " %0, %2 # __cmpxchg_asm \n" \ + "1: " ld " %0, %2 # __cmpxchg_asm \n" \ " bne %0, %z3, 2f \n" \ " .set mips0 \n" \ " move $1, %z4 \n" \ @@ -205,7 +205,7 @@ extern void __cmpxchg_called_with_bad_pointer(void); \ switch (sizeof(*(__ptr))) { \ case 4: \ - __res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new); \ + __res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new); \ break; \ case 8: \ if (sizeof(long) == 8) { \ diff --git a/arch/mips/include/asm/compat-signal.h b/arch/mips/include/asm/compat-signal.h index 6599a90..64e0b934 100644 --- a/arch/mips/include/asm/compat-signal.h +++ b/arch/mips/include/asm/compat-signal.h @@ -18,9 +18,9 @@ static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d, BUG_ON(sizeof(*d) != sizeof(*s)); BUG_ON(_NSIG_WORDS != 2); - err = __put_user(s->sig[0], &d->sig[0]); + err = __put_user(s->sig[0], &d->sig[0]); err |= __put_user(s->sig[0] >> 32, &d->sig[1]); - err |= __put_user(s->sig[1], &d->sig[2]); + err |= __put_user(s->sig[1], &d->sig[2]); err |= __put_user(s->sig[1] >> 32, &d->sig[3]); return err; diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h index ebaae96..c4bd54a 100644 --- a/arch/mips/include/asm/compat.h +++ b/arch/mips/include/asm/compat.h @@ -120,7 +120,7 @@ struct compat_statfs { typedef u32 compat_old_sigset_t; /* at least 32 bits */ -#define _COMPAT_NSIG 128 /* Don't ask !$@#% ... */ +#define _COMPAT_NSIG 128 /* Don't ask !$@#% ... */ #define _COMPAT_NSIG_BPW 32 typedef u32 compat_sigset_word; @@ -168,7 +168,7 @@ typedef struct compat_siginfo { s32 _addr; /* faulting insn/memory ref. */ } _sigfault; - /* SIGPOLL, SIGXFSZ (To do ...) */ + /* SIGPOLL, SIGXFSZ (To do ...) */ struct { int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ int _fd; @@ -179,7 +179,7 @@ typedef struct compat_siginfo { timer_t _tid; /* timer id */ int _overrun; /* overrun count */ compat_sigval_t _sigval;/* same as below */ - int _sys_private; /* not to be passed to user */ + int _sys_private; /* not to be passed to user */ } _timer; /* POSIX.1b signals */ diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index c507b93..1a57e8b 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -14,7 +14,7 @@ #include <cpu-feature-overrides.h> #ifndef current_cpu_type -#define current_cpu_type() current_cpu_data.cputype +#define current_cpu_type() current_cpu_data.cputype #endif /* @@ -87,10 +87,10 @@ #define cpu_has_mips16 (cpu_data[0].ases & MIPS_ASE_MIPS16) #endif #ifndef cpu_has_mdmx -#define cpu_has_mdmx (cpu_data[0].ases & MIPS_ASE_MDMX) +#define cpu_has_mdmx (cpu_data[0].ases & MIPS_ASE_MDMX) #endif #ifndef cpu_has_mips3d -#define cpu_has_mips3d (cpu_data[0].ases & MIPS_ASE_MIPS3D) +#define cpu_has_mips3d (cpu_data[0].ases & MIPS_ASE_MIPS3D) #endif #ifndef cpu_has_smartmips #define cpu_has_smartmips (cpu_data[0].ases & MIPS_ASE_SMARTMIPS) @@ -98,6 +98,9 @@ #ifndef cpu_has_rixi #define cpu_has_rixi (cpu_data[0].options & MIPS_CPU_RIXI) #endif +#ifndef cpu_has_mmips +#define cpu_has_mmips (cpu_data[0].options & MIPS_CPU_MICROMIPS) +#endif #ifndef cpu_has_vtag_icache #define cpu_has_vtag_icache (cpu_data[0].icache.flags & MIPS_CACHE_VTAG) #endif @@ -108,11 +111,11 @@ #define cpu_has_ic_fills_f_dc (cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC) #endif #ifndef cpu_has_pindexed_dcache -#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) +#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) #endif /* - * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors + * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors * such as the R10000 have I-Caches that snoop local stores; the embedded ones * don't. For maintaining I-cache coherency this means we need to flush the * D-cache all the way back to whever the I-cache does refills from, so the @@ -130,6 +133,19 @@ #endif #endif +# define cpu_has_mips_1 (cpu_data[0].isa_level & MIPS_CPU_ISA_I) +#ifndef cpu_has_mips_2 +# define cpu_has_mips_2 (cpu_data[0].isa_level & MIPS_CPU_ISA_II) +#endif +#ifndef cpu_has_mips_3 +# define cpu_has_mips_3 (cpu_data[0].isa_level & MIPS_CPU_ISA_III) +#endif +#ifndef cpu_has_mips_4 +# define cpu_has_mips_4 (cpu_data[0].isa_level & MIPS_CPU_ISA_IV) +#endif +#ifndef cpu_has_mips_5 +# define cpu_has_mips_5 (cpu_data[0].isa_level & MIPS_CPU_ISA_V) +#endif # ifndef cpu_has_mips32r1 # define cpu_has_mips32r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1) # endif @@ -148,8 +164,8 @@ */ #define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2) #define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2) -#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1) -#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2) +#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1) +#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2) #define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \ cpu_has_mips64r1 | cpu_has_mips64r2) @@ -159,7 +175,7 @@ /* * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other - * pre-MIPS32/MIPS53 processors have CLO, CLZ. The IDT RC64574 is 64-bit and + * pre-MIPS32/MIPS53 processors have CLO, CLZ. The IDT RC64574 is 64-bit and * has CLO and CLZ but not DCLO nor DCLZ. For 64-bit kernels * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ. */ @@ -191,7 +207,7 @@ # define cpu_has_64bits (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT) # endif # ifndef cpu_has_64bit_zero_reg -# define cpu_has_64bit_zero_reg (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT) +# define cpu_has_64bit_zero_reg (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT) # endif # ifndef cpu_has_64bit_gp_regs # define cpu_has_64bit_gp_regs 0 @@ -260,4 +276,8 @@ #define cpu_has_perf_cntr_intr_bit (cpu_data[0].options & MIPS_CPU_PCI) #endif +#ifndef cpu_has_vz +#define cpu_has_vz (cpu_data[0].ases & MIPS_ASE_VZ) +#endif + #endif /* __ASM_CPU_FEATURES_H */ diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h index c454550..41401d8 100644 --- a/arch/mips/include/asm/cpu-info.h +++ b/arch/mips/include/asm/cpu-info.h @@ -52,14 +52,14 @@ struct cpuinfo_mips { unsigned int cputype; int isa_level; int tlbsize; - struct cache_desc icache; /* Primary I-cache */ - struct cache_desc dcache; /* Primary D or combined I/D cache */ - struct cache_desc scache; /* Secondary cache */ - struct cache_desc tcache; /* Tertiary/split secondary cache */ - int srsets; /* Shadow register sets */ + struct cache_desc icache; /* Primary I-cache */ + struct cache_desc dcache; /* Primary D or combined I/D cache */ + struct cache_desc scache; /* Secondary cache */ + struct cache_desc tcache; /* Tertiary/split secondary cache */ + int srsets; /* Shadow register sets */ int core; /* physical core number */ #ifdef CONFIG_64BIT - int vmbits; /* Virtual memory size in bits */ + int vmbits; /* Virtual memory size in bits */ #endif #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) /* @@ -68,12 +68,12 @@ struct cpuinfo_mips { * exception resources, ASID spaces, etc, are common * to all TCs within the same VPE. */ - int vpe_id; /* Virtual Processor number */ + int vpe_id; /* Virtual Processor number */ #endif #ifdef CONFIG_MIPS_MT_SMTC - int tc_id; /* Thread Context number */ + int tc_id; /* Thread Context number */ #endif - void *data; /* Additional data */ + void *data; /* Additional data */ unsigned int watch_reg_count; /* Number that exist */ unsigned int watch_reg_use_cnt; /* Usable by ptrace */ #define NUM_WATCH_REGS 4 diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 90112ad..dd86ab2 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -1,6 +1,6 @@ /* * cpu.h: Values of the PRId register used to match up - * various MIPS cpu types. + * various MIPS cpu types. * * Copyright (C) 1996 David S. Miller (davem@davemloft.net) * Copyright (C) 2004 Maciej W. Rozycki @@ -9,14 +9,14 @@ #define _ASM_CPU_H /* Assigned Company values for bits 23:16 of the PRId Register - (CP0 register 15, select 0). As of the MIPS32 and MIPS64 specs from + (CP0 register 15, select 0). As of the MIPS32 and MIPS64 specs from MTI, the PRId register is defined in this (backwards compatible) way: +----------------+----------------+----------------+----------------+ - | Company Options| Company ID | Processor ID | Revision | + | Company Options| Company ID | Processor ID | Revision | +----------------+----------------+----------------+----------------+ - 31 24 23 16 15 8 7 + 31 24 23 16 15 8 7 I don't have docs for all the previous processors, but my impression is that bits 16-23 have been 0 for all MIPS processors before the MIPS32/64 @@ -29,7 +29,7 @@ #define PRID_COMP_ALCHEMY 0x030000 #define PRID_COMP_SIBYTE 0x040000 #define PRID_COMP_SANDCRAFT 0x050000 -#define PRID_COMP_NXP 0x060000 +#define PRID_COMP_NXP 0x060000 #define PRID_COMP_TOSHIBA 0x070000 #define PRID_COMP_LSI 0x080000 #define PRID_COMP_LEXRA 0x0b0000 @@ -38,9 +38,9 @@ #define PRID_COMP_INGENIC 0xd00000 /* - * Assigned values for the product ID register. In order to detect a + * Assigned values for the product ID register. In order to detect a * certain CPU type exactly eventually additional registers may need to - * be examined. These are valid when 23:16 == PRID_COMP_LEGACY + * be examined. These are valid when 23:16 == PRID_COMP_LEGACY */ #define PRID_IMP_R2000 0x0100 #define PRID_IMP_AU1_REV1 0x0100 @@ -96,19 +96,20 @@ #define PRID_IMP_1004K 0x9900 #define PRID_IMP_1074K 0x9a00 #define PRID_IMP_M14KC 0x9c00 +#define PRID_IMP_M14KEC 0x9e00 /* * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE */ -#define PRID_IMP_SB1 0x0100 -#define PRID_IMP_SB1A 0x1100 +#define PRID_IMP_SB1 0x0100 +#define PRID_IMP_SB1A 0x1100 /* * These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT */ -#define PRID_IMP_SR71000 0x0400 +#define PRID_IMP_SR71000 0x0400 /* * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM @@ -145,7 +146,7 @@ * These are the PRID's for when 23:16 == PRID_COMP_INGENIC */ -#define PRID_IMP_JZRISC 0x0200 +#define PRID_IMP_JZRISC 0x0200 /* * These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC @@ -188,9 +189,9 @@ #define PRID_REV_R3000A 0x0030 #define PRID_REV_R3000 0x0020 #define PRID_REV_R2000A 0x0010 -#define PRID_REV_TX3912 0x0010 -#define PRID_REV_TX3922 0x0030 -#define PRID_REV_TX3927 0x0040 +#define PRID_REV_TX3912 0x0010 +#define PRID_REV_TX3922 0x0030 +#define PRID_REV_TX3927 0x0040 #define PRID_REV_VR4111 0x0050 #define PRID_REV_VR4181 0x0050 /* Same as VR4111 */ #define PRID_REV_VR4121 0x0060 @@ -217,9 +218,9 @@ * FPU implementation/revision register (CP1 control register 0). * * +---------------------------------+----------------+----------------+ - * | 0 | Implementation | Revision | + * | 0 | Implementation | Revision | * +---------------------------------+----------------+----------------+ - * 31 16 15 8 7 0 + * 31 16 15 8 7 0 */ #define FPIR_IMP_NONE 0x0000 @@ -264,6 +265,7 @@ enum cpu_type_enum { CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350, CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_LOONGSON1, CPU_M14KC, + CPU_M14KEC, /* * MIPS64 class processors @@ -322,6 +324,7 @@ enum cpu_type_enum { #define MIPS_CPU_ULRI 0x00200000 /* CPU has ULRI feature */ #define MIPS_CPU_PCI 0x00400000 /* CPU has Perf Ctr Int indicator */ #define MIPS_CPU_RIXI 0x00800000 /* CPU has TLB Read/eXec Inhibit */ +#define MIPS_CPU_MICROMIPS 0x01000000 /* CPU has microMIPS capability */ /* * CPU ASE encodings @@ -333,6 +336,6 @@ enum cpu_type_enum { #define MIPS_ASE_DSP 0x00000010 /* Signal Processing ASE */ #define MIPS_ASE_MIPSMT 0x00000020 /* CPU supports MIPS MT */ #define MIPS_ASE_DSP2P 0x00000040 /* Signal Processing ASE Rev 2 */ - +#define MIPS_ASE_VZ 0x00000080 /* Virtualization ASE */ #endif /* _ASM_CPU_H */ diff --git a/arch/mips/include/asm/dec/ioasic_addrs.h b/arch/mips/include/asm/dec/ioasic_addrs.h index 4cbc1f8..a8665a7 100644 --- a/arch/mips/include/asm/dec/ioasic_addrs.h +++ b/arch/mips/include/asm/dec/ioasic_addrs.h @@ -25,22 +25,22 @@ */ #define IOASIC_SYS_ROM (0*IOASIC_SLOT_SIZE) /* system board ROM */ #define IOASIC_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */ -#define IOASIC_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */ -#define IOASIC_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */ -#define IOASIC_SCC0 (4*IOASIC_SLOT_SIZE) /* SCC #0 */ +#define IOASIC_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */ +#define IOASIC_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */ +#define IOASIC_SCC0 (4*IOASIC_SLOT_SIZE) /* SCC #0 */ #define IOASIC_VDAC_HI (5*IOASIC_SLOT_SIZE) /* VDAC (maxine) */ -#define IOASIC_SCC1 (6*IOASIC_SLOT_SIZE) /* SCC #1 (3min, 3max+) */ +#define IOASIC_SCC1 (6*IOASIC_SLOT_SIZE) /* SCC #1 (3min, 3max+) */ #define IOASIC_VDAC_LO (7*IOASIC_SLOT_SIZE) /* VDAC (maxine) */ -#define IOASIC_TOY (8*IOASIC_SLOT_SIZE) /* RTC */ -#define IOASIC_ISDN (9*IOASIC_SLOT_SIZE) /* ISDN (maxine) */ +#define IOASIC_TOY (8*IOASIC_SLOT_SIZE) /* RTC */ +#define IOASIC_ISDN (9*IOASIC_SLOT_SIZE) /* ISDN (maxine) */ #define IOASIC_ERRADDR (9*IOASIC_SLOT_SIZE) /* bus error address (3max+) */ -#define IOASIC_CHKSYN (10*IOASIC_SLOT_SIZE) /* ECC syndrome (3max+) */ +#define IOASIC_CHKSYN (10*IOASIC_SLOT_SIZE) /* ECC syndrome (3max+) */ #define IOASIC_ACC_BUS (10*IOASIC_SLOT_SIZE) /* ACCESS.bus (maxine) */ -#define IOASIC_MCR (11*IOASIC_SLOT_SIZE) /* memory control (3max+) */ -#define IOASIC_FLOPPY (11*IOASIC_SLOT_SIZE) /* FDC (maxine) */ -#define IOASIC_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */ +#define IOASIC_MCR (11*IOASIC_SLOT_SIZE) /* memory control (3max+) */ +#define IOASIC_FLOPPY (11*IOASIC_SLOT_SIZE) /* FDC (maxine) */ +#define IOASIC_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */ #define IOASIC_FDC_DMA (13*IOASIC_SLOT_SIZE) /* FDC DMA (maxine) */ -#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE) /* ??? */ +#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE) /* ??? */ #define IOASIC_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */ diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h index 88d9ffd..0eb3241 100644 --- a/arch/mips/include/asm/dec/kn01.h +++ b/arch/mips/include/asm/dec/kn01.h @@ -57,12 +57,12 @@ /* * System Control & Status Register bits. */ -#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */ -#define KN01_CSR_STATUS (1<<14) /* self-test result status output */ -#define KN01_CSR_PARDIS (1<<13) /* parity error disable */ -#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */ -#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */ -#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/ +#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */ +#define KN01_CSR_STATUS (1<<14) /* self-test result status output */ +#define KN01_CSR_PARDIS (1<<13) /* parity error disable */ +#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */ +#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */ +#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/ #define KN01_CSR_VINT (1<<9) /* PCC area detect #2 status & ack */ #define KN01_CSR_TXDIS (1<<8) /* DZ11 transmit disable */ #define KN01_CSR_VBGTRG (1<<2) /* blue DAC voltage over green (r/o) */ diff --git a/arch/mips/include/asm/dec/kn02ca.h b/arch/mips/include/asm/dec/kn02ca.h index 92c0fe2..69dc2a9 100644 --- a/arch/mips/include/asm/dec/kn02ca.h +++ b/arch/mips/include/asm/dec/kn02ca.h @@ -68,7 +68,7 @@ #define KN03CA_IO_SSR_ISDN_RST (1<<12) /* ~ISDN (Am79C30A) reset */ #define KN03CA_IO_SSR_FLOPPY_RST (1<<7) /* ~FDC (82077) reset */ -#define KN03CA_IO_SSR_VIDEO_RST (1<<6) /* ~framebuffer reset */ +#define KN03CA_IO_SSR_VIDEO_RST (1<<6) /* ~framebuffer reset */ #define KN03CA_IO_SSR_AB_RST (1<<5) /* ACCESS.bus reset */ #define KN03CA_IO_SSR_RES_4 (1<<4) /* unused */ #define KN03CA_IO_SSR_RES_3 (1<<4) /* unused */ diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h index c0ead63..4465777 100644 --- a/arch/mips/include/asm/dec/prom.h +++ b/arch/mips/include/asm/dec/prom.h @@ -49,7 +49,7 @@ #ifdef CONFIG_64BIT -#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */ +#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */ #else /* !CONFIG_64BIT */ diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index 006b43e..f8fc74b 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -5,7 +5,7 @@ #include <asm/cache.h> #include <asm-generic/dma-coherent.h> -#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */ +#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */ #include <dma-coherence.h> #endif diff --git a/arch/mips/include/asm/dma.h b/arch/mips/include/asm/dma.h index f5097f6..5b9ed1b 100644 --- a/arch/mips/include/asm/dma.h +++ b/arch/mips/include/asm/dma.h @@ -47,21 +47,21 @@ * * Address mapping for channels 0-3: * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) + * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * P7 ... P0 A7 ... A0 A7 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) * * Address mapping for channels 5-7: * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) + * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) + * | ... | \ \ ... \ \ \ ... \ \ + * | ... | \ \ ... \ \ \ ... \ (not used) + * | ... | \ \ ... \ \ \ ... \ + * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) * * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at @@ -102,55 +102,55 @@ /* DMA controller registers */ #define DMA1_CMD_REG 0x08 /* command register (w) */ #define DMA1_STAT_REG 0x08 /* status register (r) */ -#define DMA1_REQ_REG 0x09 /* request register (w) */ +#define DMA1_REQ_REG 0x09 /* request register (w) */ #define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ #define DMA1_MODE_REG 0x0B /* mode register (w) */ #define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ +#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ #define DMA1_RESET_REG 0x0D /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ -#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ +#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ +#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ #define DMA2_CMD_REG 0xD0 /* command register (w) */ #define DMA2_STAT_REG 0xD0 /* status register (r) */ -#define DMA2_REQ_REG 0xD2 /* request register (w) */ +#define DMA2_REQ_REG 0xD2 /* request register (w) */ #define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ #define DMA2_MODE_REG 0xD6 /* mode register (w) */ #define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ +#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ #define DMA2_RESET_REG 0xDA /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ -#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ - -#define DMA_ADDR_0 0x00 /* DMA address registers */ -#define DMA_ADDR_1 0x02 -#define DMA_ADDR_2 0x04 -#define DMA_ADDR_3 0x06 -#define DMA_ADDR_4 0xC0 -#define DMA_ADDR_5 0xC4 -#define DMA_ADDR_6 0xC8 -#define DMA_ADDR_7 0xCC - -#define DMA_CNT_0 0x01 /* DMA count registers */ -#define DMA_CNT_1 0x03 -#define DMA_CNT_2 0x05 -#define DMA_CNT_3 0x07 -#define DMA_CNT_4 0xC2 -#define DMA_CNT_5 0xC6 -#define DMA_CNT_6 0xCA -#define DMA_CNT_7 0xCE - -#define DMA_PAGE_0 0x87 /* DMA page registers */ -#define DMA_PAGE_1 0x83 -#define DMA_PAGE_2 0x81 -#define DMA_PAGE_3 0x82 -#define DMA_PAGE_5 0x8B -#define DMA_PAGE_6 0x89 -#define DMA_PAGE_7 0x8A +#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ +#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ + +#define DMA_ADDR_0 0x00 /* DMA address registers */ +#define DMA_ADDR_1 0x02 +#define DMA_ADDR_2 0x04 +#define DMA_ADDR_3 0x06 +#define DMA_ADDR_4 0xC0 +#define DMA_ADDR_5 0xC4 +#define DMA_ADDR_6 0xC8 +#define DMA_ADDR_7 0xCC + +#define DMA_CNT_0 0x01 /* DMA count registers */ +#define DMA_CNT_1 0x03 +#define DMA_CNT_2 0x05 +#define DMA_CNT_3 0x07 +#define DMA_CNT_4 0xC2 +#define DMA_CNT_5 0xC6 +#define DMA_CNT_6 0xCA +#define DMA_CNT_7 0xCE + +#define DMA_PAGE_0 0x87 /* DMA page registers */ +#define DMA_PAGE_1 0x83 +#define DMA_PAGE_2 0x81 +#define DMA_PAGE_3 0x82 +#define DMA_PAGE_5 0x8B +#define DMA_PAGE_6 0x89 +#define DMA_PAGE_7 0x8A #define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ #define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ +#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ #define DMA_AUTOINIT 0x10 @@ -172,7 +172,7 @@ static __inline__ void release_dma_lock(unsigned long flags) static __inline__ void enable_dma(unsigned int dmanr) { if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); + dma_outb(dmanr, DMA1_MASK_REG); else dma_outb(dmanr & 3, DMA2_MASK_REG); } @@ -204,7 +204,7 @@ static __inline__ void clear_dma_ff(unsigned int dmanr) static __inline__ void set_dma_mode(unsigned int dmanr, char mode) { if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); + dma_outb(mode | dmanr, DMA1_MODE_REG); else dma_outb(mode | (dmanr&3), DMA2_MODE_REG); } @@ -248,10 +248,10 @@ static __inline__ void set_dma_page(unsigned int dmanr, char pagenr) static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) { set_dma_page(dmanr, a>>16); - if (dmanr <= 3) { + if (dmanr <= 3) { dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { + dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); + } else { dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); } @@ -268,14 +268,14 @@ static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) */ static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) { - count--; - if (dmanr <= 3) { + count--; + if (dmanr <= 3) { dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { + } else { dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } + } } diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index 455c0ac..cf3ae24 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -11,13 +11,13 @@ /* ELF header e_flags defines. */ /* MIPS architecture level. */ -#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ -#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ -#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ -#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ -#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ -#define EF_MIPS_ARCH_32 0x50000000 /* MIPS32 code. */ -#define EF_MIPS_ARCH_64 0x60000000 /* MIPS64 code. */ +#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */ +#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */ +#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */ +#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */ +#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */ +#define EF_MIPS_ARCH_32 0x50000000 /* MIPS32 code. */ +#define EF_MIPS_ARCH_64 0x60000000 /* MIPS64 code. */ #define EF_MIPS_ARCH_32R2 0x70000000 /* MIPS32 R2 code. */ #define EF_MIPS_ARCH_64R2 0x80000000 /* MIPS64 R2 code. */ @@ -74,7 +74,7 @@ #define R_MIPS_CALL16 11 #define R_MIPS_GPREL32 12 /* The remaining relocs are defined on Irix, although they are not - in the MIPS ELF ABI. */ + in the MIPS ELF ABI. */ #define R_MIPS_UNUSED1 13 #define R_MIPS_UNUSED2 14 #define R_MIPS_UNUSED3 15 @@ -214,7 +214,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; \ if (__h->e_machine != EM_MIPS) \ __res = 0; \ - if (__h->e_ident[EI_CLASS] != ELFCLASS64) \ + if (__h->e_ident[EI_CLASS] != ELFCLASS64) \ __res = 0; \ \ __res; \ @@ -292,7 +292,7 @@ do { \ __SET_PERSONALITY32_O32(); \ } while (0) #else -#define __SET_PERSONALITY32(ex) do { } while (0) +#define __SET_PERSONALITY32(ex) do { } while (0) #endif #define SET_PERSONALITY(ex) \ @@ -337,11 +337,11 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); instruction set this cpu supports. This could be done in userspace, but it's not easy, and we've already done it here. */ -#define ELF_HWCAP (0) +#define ELF_HWCAP (0) /* * This yields a string that ld.so will use to load implementation - * specific libraries for optimization. This is more specific in + * specific libraries for optimization. This is more specific in * intent than poking at uname or /proc/cpuinfo. */ @@ -365,11 +365,11 @@ extern const char *__elf_platform; /* This is the location that an ET_DYN program is loaded if exec'ed. Typical use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ #ifndef ELF_ET_DYN_BASE -#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) +#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2) #endif #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 diff --git a/arch/mips/include/asm/emma/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h index c1449d2..ecf0596 100644 --- a/arch/mips/include/asm/emma/emma2rh.h +++ b/arch/mips/include/asm/emma/emma2rh.h @@ -2,7 +2,7 @@ * Copyright (C) NEC Electronics Corporation 2005-2006 * * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h - * Copyright 2001 MontaVista Software Inc. + * Copyright 2001 MontaVista Software Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -40,7 +40,7 @@ #define EMMA2RH_BHIF_INT1_EN_2 (0x000058+REGBASE) #define EMMA2RH_BHIF_SW_INT (0x000070+REGBASE) #define EMMA2RH_BHIF_SW_INT_EN (0x000080+REGBASE) -#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE) +#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE) #define EMMA2RH_BHIF_MAIN_CTRL (0x0000b4+REGBASE) #define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS (0x0000c0+REGBASE) #define EMMA2RH_GPIO_DIR (0x110d20+REGBASE) @@ -73,7 +73,7 @@ * Memory map (physical address) * * Note most of the following address must be properly aligned by the - * corresponding size. For example, if PCI_IO_SIZE is 16MB, then + * corresponding size. For example, if PCI_IO_SIZE is 16MB, then * PCI_IO_BASE must be aligned along 16MB boundary. */ @@ -96,8 +96,8 @@ #define EMMA2RH_ROM_BASE 0x1c000000 #define EMMA2RH_ROM_SIZE 0x04000000 /* 64 MB */ -#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE -#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE +#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE +#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE #define NUM_EMMA2RH_IRQ 96 @@ -169,51 +169,51 @@ static inline u8 emma2rh_in8(u32 offset) **/ /*---------------------------------------------------------------------------*/ -/* CNT - Control register (00H R/W) */ +/* CNT - Control register (00H R/W) */ /*---------------------------------------------------------------------------*/ -#define SPT 0x00000001 -#define STT 0x00000002 -#define ACKE 0x00000004 -#define WTIM 0x00000008 -#define SPIE 0x00000010 -#define WREL 0x00000020 -#define LREL 0x00000040 -#define IICE 0x00000080 -#define CNT_RESERVED 0x000000ff /* reserved bit 0 */ - -#define I2C_EMMA_START (IICE | STT) -#define I2C_EMMA_STOP (IICE | SPT) +#define SPT 0x00000001 +#define STT 0x00000002 +#define ACKE 0x00000004 +#define WTIM 0x00000008 +#define SPIE 0x00000010 +#define WREL 0x00000020 +#define LREL 0x00000040 +#define IICE 0x00000080 +#define CNT_RESERVED 0x000000ff /* reserved bit 0 */ + +#define I2C_EMMA_START (IICE | STT) +#define I2C_EMMA_STOP (IICE | SPT) #define I2C_EMMA_REPSTART I2C_EMMA_START /*---------------------------------------------------------------------------*/ -/* STA - Status register (10H Read) */ +/* STA - Status register (10H Read) */ /*---------------------------------------------------------------------------*/ -#define MSTS 0x00000080 -#define ALD 0x00000040 -#define EXC 0x00000020 -#define COI 0x00000010 -#define TRC 0x00000008 -#define ACKD 0x00000004 -#define STD 0x00000002 -#define SPD 0x00000001 +#define MSTS 0x00000080 +#define ALD 0x00000040 +#define EXC 0x00000020 +#define COI 0x00000010 +#define TRC 0x00000008 +#define ACKD 0x00000004 +#define STD 0x00000002 +#define SPD 0x00000001 /*---------------------------------------------------------------------------*/ -/* CSEL - Clock select register (20H R/W) */ +/* CSEL - Clock select register (20H R/W) */ /*---------------------------------------------------------------------------*/ -#define FCL 0x00000080 -#define ND50 0x00000040 -#define CLD 0x00000020 -#define DAD 0x00000010 -#define SMC 0x00000008 -#define DFC 0x00000004 -#define CL 0x00000003 -#define CSEL_RESERVED 0x000000ff /* reserved bit 0 */ - -#define FAST397 0x0000008b -#define FAST297 0x0000008a -#define FAST347 0x0000000b -#define FAST260 0x0000000a -#define FAST130 0x00000008 +#define FCL 0x00000080 +#define ND50 0x00000040 +#define CLD 0x00000020 +#define DAD 0x00000010 +#define SMC 0x00000008 +#define DFC 0x00000004 +#define CL 0x00000003 +#define CSEL_RESERVED 0x000000ff /* reserved bit 0 */ + +#define FAST397 0x0000008b +#define FAST297 0x0000008a +#define FAST347 0x0000000b +#define FAST260 0x0000000a +#define FAST130 0x00000008 #define STANDARD108 0x00000083 #define STANDARD83 0x00000082 #define STANDARD95 0x00000003 @@ -222,32 +222,32 @@ static inline u8 emma2rh_in8(u32 offset) #define STANDARD71 0x00000000 /*---------------------------------------------------------------------------*/ -/* SVA - Slave address register (30H R/W) */ +/* SVA - Slave address register (30H R/W) */ /*---------------------------------------------------------------------------*/ -#define SVA 0x000000fe +#define SVA 0x000000fe /*---------------------------------------------------------------------------*/ -/* SHR - Shift register (40H R/W) */ +/* SHR - Shift register (40H R/W) */ /*---------------------------------------------------------------------------*/ -#define SR 0x000000ff +#define SR 0x000000ff /*---------------------------------------------------------------------------*/ -/* INT - Interrupt register (50H R/W) */ -/* INTM - Interrupt mask register (60H R/W) */ +/* INT - Interrupt register (50H R/W) */ +/* INTM - Interrupt mask register (60H R/W) */ /*---------------------------------------------------------------------------*/ -#define INTE0 0x00000001 +#define INTE0 0x00000001 /*********************************************************************** * I2C registers *********************************************************************** */ -#define I2C_EMMA_CNT 0x00 -#define I2C_EMMA_STA 0x10 -#define I2C_EMMA_CSEL 0x20 -#define I2C_EMMA_SVA 0x30 -#define I2C_EMMA_SHR 0x40 -#define I2C_EMMA_INT 0x50 -#define I2C_EMMA_INTM 0x60 +#define I2C_EMMA_CNT 0x00 +#define I2C_EMMA_STA 0x10 +#define I2C_EMMA_CSEL 0x20 +#define I2C_EMMA_SVA 0x30 +#define I2C_EMMA_SHR 0x40 +#define I2C_EMMA_INT 0x50 +#define I2C_EMMA_INTM 0x60 /* * include the board dependent part diff --git a/arch/mips/include/asm/emma/markeins.h b/arch/mips/include/asm/emma/markeins.h index bf2d229..e55a674 100644 --- a/arch/mips/include/asm/emma/markeins.h +++ b/arch/mips/include/asm/emma/markeins.h @@ -2,7 +2,7 @@ * Copyright (C) NEC Electronics Corporation 2005-2006 * * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h - * Copyright 2001 MontaVista Software Inc. + * Copyright 2001 MontaVista Software Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h index 98bcc98..dfaaf49 100644 --- a/arch/mips/include/asm/fixmap.h +++ b/arch/mips/include/asm/fixmap.h @@ -95,7 +95,7 @@ static inline unsigned long fix_to_virt(const unsigned int idx) if (idx >= __end_of_fixed_addresses) __this_fixmap_does_not_exist(); - return __fix_to_virt(idx); + return __fix_to_virt(idx); } static inline unsigned long virt_to_fix(const unsigned long vaddr) @@ -111,7 +111,7 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr) * Called from pgtable_init() */ extern void fixrange_init(unsigned long start, unsigned long end, - pgd_t *pgd_base); + pgd_t *pgd_base); #endif diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h index 4456c9c..d75aed3 100644 --- a/arch/mips/include/asm/floppy.h +++ b/arch/mips/include/asm/floppy.h @@ -24,9 +24,9 @@ static inline void fd_cacheflush(char * addr, long size) * And on Mips's the CMOS info fails also ... * * FIXME: This information should come from the ARC configuration tree - * or wherever a particular machine has stored this ... + * or wherever a particular machine has stored this ... */ -#define FLOPPY0_TYPE fd_drive_type(0) +#define FLOPPY0_TYPE fd_drive_type(0) #define FLOPPY1_TYPE fd_drive_type(1) #define FDC1 fd_getfdaddr1() diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h index 2b5fddc..429481f 100644 --- a/arch/mips/include/asm/fpregdef.h +++ b/arch/mips/include/asm/fpregdef.h @@ -20,15 +20,15 @@ * These definitions only cover the R3000-ish 16/32 register model. * But we're trying to be R3000 friendly anyway ... */ -#define fv0 $f0 /* return value */ +#define fv0 $f0 /* return value */ #define fv0f $f1 #define fv1 $f2 #define fv1f $f3 -#define fa0 $f12 /* argument registers */ +#define fa0 $f12 /* argument registers */ #define fa0f $f13 #define fa1 $f14 #define fa1f $f15 -#define ft0 $f4 /* caller saved */ +#define ft0 $f4 /* caller saved */ #define ft0f $f5 #define ft1 $f6 #define ft1f $f7 @@ -40,7 +40,7 @@ #define ft4f $f17 #define ft5 $f18 #define ft5f $f19 -#define fs0 $f20 /* callee saved */ +#define fs0 $f20 /* callee saved */ #define fs0f $f21 #define fs1 $f22 #define fs1f $f23 @@ -53,7 +53,7 @@ #define fs5 $f30 #define fs5f $f31 -#define fcr31 $31 /* FPU status register */ +#define fcr31 $31 /* FPU status register */ #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h index 7fcef8e..d088e5d 100644 --- a/arch/mips/include/asm/fpu.h +++ b/arch/mips/include/asm/fpu.h @@ -35,14 +35,14 @@ extern void _restore_fp(struct task_struct *); #define __enable_fpu() \ do { \ - set_c0_status(ST0_CU1); \ - enable_fpu_hazard(); \ + set_c0_status(ST0_CU1); \ + enable_fpu_hazard(); \ } while (0) #define __disable_fpu() \ do { \ clear_c0_status(ST0_CU1); \ - disable_fpu_hazard(); \ + disable_fpu_hazard(); \ } while (0) #define enable_fpu() \ diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h index 6ebf173..6ea1581 100644 --- a/arch/mips/include/asm/futex.h +++ b/arch/mips/include/asm/futex.h @@ -92,24 +92,24 @@ futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("move $1, %z5", ret, oldval, uaddr, oparg); + __futex_atomic_op("move $1, %z5", ret, oldval, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("addu $1, %1, %z5", - ret, oldval, uaddr, oparg); + __futex_atomic_op("addu $1, %1, %z5", + ret, oldval, uaddr, oparg); break; case FUTEX_OP_OR: __futex_atomic_op("or $1, %1, %z5", - ret, oldval, uaddr, oparg); + ret, oldval, uaddr, oparg); break; case FUTEX_OP_ANDN: __futex_atomic_op("and $1, %1, %z5", - ret, oldval, uaddr, ~oparg); + ret, oldval, uaddr, ~oparg); break; case FUTEX_OP_XOR: __futex_atomic_op("xor $1, %1, %z5", - ret, oldval, uaddr, oparg); + ret, oldval, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/mips/include/asm/fw/arc/hinv.h b/arch/mips/include/asm/fw/arc/hinv.h index e6ff4ad..f8d37d1 100644 --- a/arch/mips/include/asm/fw/arc/hinv.h +++ b/arch/mips/include/asm/fw/arc/hinv.h @@ -12,7 +12,7 @@ typedef enum configclass { SystemClass, ProcessorClass, CacheClass, -#ifndef _NT_PROM +#ifndef _NT_PROM MemoryClass, AdapterClass, ControllerClass, @@ -34,7 +34,7 @@ typedef enum configtype { SecondaryICache, SecondaryDCache, SecondaryCache, -#ifndef _NT_PROM +#ifndef _NT_PROM Memory, #endif EISAAdapter, @@ -93,7 +93,7 @@ typedef enum { } IDENTIFIERFLAG; #ifndef NULL /* for GetChild(NULL); */ -#define NULL 0 +#define NULL 0 #endif union key_u { @@ -125,7 +125,7 @@ typedef struct component { IDENTIFIERFLAG Flags; USHORT Version; USHORT Revision; - ULONG Key; + ULONG Key; ULONG AffinityMask; ULONG ConfigurationDataSize; ULONG IdentifierLength; @@ -149,7 +149,7 @@ typedef struct systemid { typedef enum memorytype { ExceptionBlock, SPBPage, /* ARCS == SystemParameterBlock */ -#ifndef _NT_PROM +#ifndef _NT_PROM FreeContiguous, FreeMemory, BadMemory, diff --git a/arch/mips/include/asm/fw/arc/types.h b/arch/mips/include/asm/fw/arc/types.h index 2b11f87..ad16380 100644 --- a/arch/mips/include/asm/fw/arc/types.h +++ b/arch/mips/include/asm/fw/arc/types.h @@ -15,7 +15,7 @@ typedef char CHAR; typedef short SHORT; typedef long LARGE_INTEGER __attribute__ ((__mode__ (__DI__))); -typedef long LONG __attribute__ ((__mode__ (__SI__))); +typedef long LONG __attribute__ ((__mode__ (__SI__))); typedef unsigned char UCHAR; typedef unsigned short USHORT; typedef unsigned long ULONG __attribute__ ((__mode__ (__SI__))); @@ -23,11 +23,11 @@ typedef void VOID; /* The pointer types. Note that we're using a 64-bit compiler but all pointer in the ARC structures are only 32-bit, so we need some disgusting - workarounds. Keep your vomit bag handy. */ + workarounds. Keep your vomit bag handy. */ typedef LONG _PCHAR; typedef LONG _PSHORT; typedef LONG _PLARGE_INTEGER; -typedef LONG _PLONG; +typedef LONG _PLONG; typedef LONG _PUCHAR; typedef LONG _PUSHORT; typedef LONG _PULONG; @@ -40,7 +40,7 @@ typedef LONG _PVOID; typedef char CHAR; typedef short SHORT; typedef long LARGE_INTEGER __attribute__ ((__mode__ (__DI__))); -typedef long LONG __attribute__ ((__mode__ (__DI__))); +typedef long LONG __attribute__ ((__mode__ (__DI__))); typedef unsigned char UCHAR; typedef unsigned short USHORT; typedef unsigned long ULONG __attribute__ ((__mode__ (__DI__))); @@ -51,7 +51,7 @@ typedef void VOID; typedef CHAR *_PCHAR; typedef SHORT *_PSHORT; typedef LARGE_INTEGER *_PLARGE_INTEGER; -typedef LONG *_PLONG; +typedef LONG *_PLONG; typedef UCHAR *_PUCHAR; typedef USHORT *_PUSHORT; typedef ULONG *_PULONG; @@ -62,7 +62,7 @@ typedef VOID *_PVOID; typedef CHAR *PCHAR; typedef SHORT *PSHORT; typedef LARGE_INTEGER *PLARGE_INTEGER; -typedef LONG *PLONG; +typedef LONG *PLONG; typedef UCHAR *PUCHAR; typedef USHORT *PUSHORT; typedef ULONG *PULONG; diff --git a/arch/mips/include/asm/fw/cfe/cfe_api.h b/arch/mips/include/asm/fw/cfe/cfe_api.h index 0995575..1734755 100644 --- a/arch/mips/include/asm/fw/cfe/cfe_api.h +++ b/arch/mips/include/asm/fw/cfe/cfe_api.h @@ -40,7 +40,7 @@ typedef long intptr_t; /* Seal indicating CFE's presence, passed to user program. */ #define CFE_EPTSEAL 0x43464531 -#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */ +#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */ #define CFE_MI_AVAILABLE 1 /* memory is available */ #define CFE_FLG_WARMSTART 0x00000001 @@ -52,13 +52,13 @@ typedef long intptr_t; #define CFE_STDHANDLE_CONSOLE 0 -#define CFE_DEV_NETWORK 1 +#define CFE_DEV_NETWORK 1 #define CFE_DEV_DISK 2 #define CFE_DEV_FLASH 3 #define CFE_DEV_SERIAL 4 #define CFE_DEV_CPU 5 #define CFE_DEV_NVRAM 6 -#define CFE_DEV_CLOCK 7 +#define CFE_DEV_CLOCK 7 #define CFE_DEV_OTHER 8 #define CFE_DEV_MASK 0x0F diff --git a/arch/mips/include/asm/fw/cfe/cfe_error.h b/arch/mips/include/asm/fw/cfe/cfe_error.h index b803746..fc0e91f 100644 --- a/arch/mips/include/asm/fw/cfe/cfe_error.h +++ b/arch/mips/include/asm/fw/cfe/cfe_error.h @@ -25,7 +25,7 @@ */ #define CFE_OK 0 -#define CFE_ERR -1 /* generic error */ +#define CFE_ERR -1 /* generic error */ #define CFE_ERR_INV_COMMAND -2 #define CFE_ERR_EOF -3 #define CFE_ERR_IOERR -4 @@ -37,12 +37,12 @@ #define CFE_ERR_ENVREADONLY -10 #define CFE_ERR_NOTELF -11 -#define CFE_ERR_NOT32BIT -12 -#define CFE_ERR_WRONGENDIAN -13 -#define CFE_ERR_BADELFVERS -14 -#define CFE_ERR_NOTMIPS -15 -#define CFE_ERR_BADELFFMT -16 -#define CFE_ERR_BADADDR -17 +#define CFE_ERR_NOT32BIT -12 +#define CFE_ERR_WRONGENDIAN -13 +#define CFE_ERR_BADELFVERS -14 +#define CFE_ERR_NOTMIPS -15 +#define CFE_ERR_BADELFFMT -16 +#define CFE_ERR_BADADDR -17 #define CFE_ERR_FILENOTFOUND -18 #define CFE_ERR_UNSUPPORTED -19 @@ -73,8 +73,8 @@ #define CFE_ERR_NOTREADY -36 -#define CFE_ERR_GETMEM -37 -#define CFE_ERR_SETMEM -38 +#define CFE_ERR_GETMEM -37 +#define CFE_ERR_SETMEM -38 #define CFE_ERR_NOTCONN -39 #define CFE_ERR_ADDRINUSE -40 diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h index c0cf76a..a7359f7 100644 --- a/arch/mips/include/asm/gcmpregs.h +++ b/arch/mips/include/asm/gcmpregs.h @@ -32,7 +32,7 @@ /* GCMP register access */ #define GCMPGCB(reg) REGP(_gcmp_base, GCMPGCBOFS(reg)) -#define GCMPGCBn(reg, n) REGP(_gcmp_base, GCMPGCBOFSn(reg, n)) +#define GCMPGCBn(reg, n) REGP(_gcmp_base, GCMPGCBOFSn(reg, n)) #define GCMPCLCB(reg) REGP(_gcmp_base, GCMPCLCBOFS(reg)) #define GCMPCOCB(reg) REGP(_gcmp_base, GCMPCOCBOFS(reg)) #define GCMPGDB(reg) REGP(_gcmp_base, GCMPGDBOFS(reg)) @@ -45,76 +45,76 @@ /* GCB registers */ #define GCMP_GCB_GC_OFS 0x0000 /* Global Config Register */ -#define GCMP_GCB_GC_NUMIOCU_SHF 8 -#define GCMP_GCB_GC_NUMIOCU_MSK GCMPGCBMSK(GC_NUMIOCU, 4) -#define GCMP_GCB_GC_NUMCORES_SHF 0 -#define GCMP_GCB_GC_NUMCORES_MSK GCMPGCBMSK(GC_NUMCORES, 8) +#define GCMP_GCB_GC_NUMIOCU_SHF 8 +#define GCMP_GCB_GC_NUMIOCU_MSK GCMPGCBMSK(GC_NUMIOCU, 4) +#define GCMP_GCB_GC_NUMCORES_SHF 0 +#define GCMP_GCB_GC_NUMCORES_MSK GCMPGCBMSK(GC_NUMCORES, 8) #define GCMP_GCB_GCMPB_OFS 0x0008 /* Global GCMP Base */ -#define GCMP_GCB_GCMPB_GCMPBASE_SHF 15 -#define GCMP_GCB_GCMPB_GCMPBASE_MSK GCMPGCBMSK(GCMPB_GCMPBASE, 17) -#define GCMP_GCB_GCMPB_CMDEFTGT_SHF 0 -#define GCMP_GCB_GCMPB_CMDEFTGT_MSK GCMPGCBMSK(GCMPB_CMDEFTGT, 2) -#define GCMP_GCB_GCMPB_CMDEFTGT_DISABLED 0 -#define GCMP_GCB_GCMPB_CMDEFTGT_MEM 1 -#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2 -#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3 +#define GCMP_GCB_GCMPB_GCMPBASE_SHF 15 +#define GCMP_GCB_GCMPB_GCMPBASE_MSK GCMPGCBMSK(GCMPB_GCMPBASE, 17) +#define GCMP_GCB_GCMPB_CMDEFTGT_SHF 0 +#define GCMP_GCB_GCMPB_CMDEFTGT_MSK GCMPGCBMSK(GCMPB_CMDEFTGT, 2) +#define GCMP_GCB_GCMPB_CMDEFTGT_DISABLED 0 +#define GCMP_GCB_GCMPB_CMDEFTGT_MEM 1 +#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2 +#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3 #define GCMP_GCB_CCMC_OFS 0x0010 /* Global CM Control */ #define GCMP_GCB_GCSRAP_OFS 0x0020 /* Global CSR Access Privilege */ -#define GCMP_GCB_GCSRAP_CMACCESS_SHF 0 -#define GCMP_GCB_GCSRAP_CMACCESS_MSK GCMPGCBMSK(GCSRAP_CMACCESS, 8) +#define GCMP_GCB_GCSRAP_CMACCESS_SHF 0 +#define GCMP_GCB_GCSRAP_CMACCESS_MSK GCMPGCBMSK(GCSRAP_CMACCESS, 8) #define GCMP_GCB_GCMPREV_OFS 0x0030 /* GCMP Revision Register */ #define GCMP_GCB_GCMEM_OFS 0x0040 /* Global CM Error Mask */ #define GCMP_GCB_GCMEC_OFS 0x0048 /* Global CM Error Cause */ -#define GCMP_GCB_GMEC_ERROR_TYPE_SHF 27 -#define GCMP_GCB_GMEC_ERROR_TYPE_MSK GCMPGCBMSK(GMEC_ERROR_TYPE, 5) -#define GCMP_GCB_GMEC_ERROR_INFO_SHF 0 -#define GCMP_GCB_GMEC_ERROR_INFO_MSK GCMPGCBMSK(GMEC_ERROR_INFO, 27) +#define GCMP_GCB_GMEC_ERROR_TYPE_SHF 27 +#define GCMP_GCB_GMEC_ERROR_TYPE_MSK GCMPGCBMSK(GMEC_ERROR_TYPE, 5) +#define GCMP_GCB_GMEC_ERROR_INFO_SHF 0 +#define GCMP_GCB_GMEC_ERROR_INFO_MSK GCMPGCBMSK(GMEC_ERROR_INFO, 27) #define GCMP_GCB_GCMEA_OFS 0x0050 /* Global CM Error Address */ #define GCMP_GCB_GCMEO_OFS 0x0058 /* Global CM Error Multiple */ -#define GCMP_GCB_GMEO_ERROR_2ND_SHF 0 -#define GCMP_GCB_GMEO_ERROR_2ND_MSK GCMPGCBMSK(GMEO_ERROR_2ND, 5) +#define GCMP_GCB_GMEO_ERROR_2ND_SHF 0 +#define GCMP_GCB_GMEO_ERROR_2ND_MSK GCMPGCBMSK(GMEO_ERROR_2ND, 5) #define GCMP_GCB_GICBA_OFS 0x0080 /* Global Interrupt Controller Base Address */ -#define GCMP_GCB_GICBA_BASE_SHF 17 -#define GCMP_GCB_GICBA_BASE_MSK GCMPGCBMSK(GICBA_BASE, 15) -#define GCMP_GCB_GICBA_EN_SHF 0 -#define GCMP_GCB_GICBA_EN_MSK GCMPGCBMSK(GICBA_EN, 1) +#define GCMP_GCB_GICBA_BASE_SHF 17 +#define GCMP_GCB_GICBA_BASE_MSK GCMPGCBMSK(GICBA_BASE, 15) +#define GCMP_GCB_GICBA_EN_SHF 0 +#define GCMP_GCB_GICBA_EN_MSK GCMPGCBMSK(GICBA_EN, 1) /* GCB Regions */ #define GCMP_GCB_CMxBASE_OFS(n) (0x0090+16*(n)) /* Global Region[0-3] Base Address */ -#define GCMP_GCB_CMxBASE_BASE_SHF 16 -#define GCMP_GCB_CMxBASE_BASE_MSK GCMPGCBMSK(CMxBASE_BASE, 16) +#define GCMP_GCB_CMxBASE_BASE_SHF 16 +#define GCMP_GCB_CMxBASE_BASE_MSK GCMPGCBMSK(CMxBASE_BASE, 16) #define GCMP_GCB_CMxMASK_OFS(n) (0x0098+16*(n)) /* Global Region[0-3] Address Mask */ -#define GCMP_GCB_CMxMASK_MASK_SHF 16 -#define GCMP_GCB_CMxMASK_MASK_MSK GCMPGCBMSK(CMxMASK_MASK, 16) -#define GCMP_GCB_CMxMASK_CMREGTGT_SHF 0 -#define GCMP_GCB_CMxMASK_CMREGTGT_MSK GCMPGCBMSK(CMxMASK_CMREGTGT, 2) -#define GCMP_GCB_CMxMASK_CMREGTGT_MEM 0 -#define GCMP_GCB_CMxMASK_CMREGTGT_MEM1 1 -#define GCMP_GCB_CMxMASK_CMREGTGT_IOCU1 2 -#define GCMP_GCB_CMxMASK_CMREGTGT_IOCU2 3 +#define GCMP_GCB_CMxMASK_MASK_SHF 16 +#define GCMP_GCB_CMxMASK_MASK_MSK GCMPGCBMSK(CMxMASK_MASK, 16) +#define GCMP_GCB_CMxMASK_CMREGTGT_SHF 0 +#define GCMP_GCB_CMxMASK_CMREGTGT_MSK GCMPGCBMSK(CMxMASK_CMREGTGT, 2) +#define GCMP_GCB_CMxMASK_CMREGTGT_MEM 0 +#define GCMP_GCB_CMxMASK_CMREGTGT_MEM1 1 +#define GCMP_GCB_CMxMASK_CMREGTGT_IOCU1 2 +#define GCMP_GCB_CMxMASK_CMREGTGT_IOCU2 3 /* Core local/Core other control block registers */ #define GCMP_CCB_RESETR_OFS 0x0000 /* Reset Release */ -#define GCMP_CCB_RESETR_INRESET_SHF 0 -#define GCMP_CCB_RESETR_INRESET_MSK GCMPCCBMSK(RESETR_INRESET, 16) +#define GCMP_CCB_RESETR_INRESET_SHF 0 +#define GCMP_CCB_RESETR_INRESET_MSK GCMPCCBMSK(RESETR_INRESET, 16) #define GCMP_CCB_COHCTL_OFS 0x0008 /* Coherence Control */ -#define GCMP_CCB_COHCTL_DOMAIN_SHF 0 -#define GCMP_CCB_COHCTL_DOMAIN_MSK GCMPCCBMSK(COHCTL_DOMAIN, 8) +#define GCMP_CCB_COHCTL_DOMAIN_SHF 0 +#define GCMP_CCB_COHCTL_DOMAIN_MSK GCMPCCBMSK(COHCTL_DOMAIN, 8) #define GCMP_CCB_CFG_OFS 0x0010 /* Config */ -#define GCMP_CCB_CFG_IOCUTYPE_SHF 10 -#define GCMP_CCB_CFG_IOCUTYPE_MSK GCMPCCBMSK(CFG_IOCUTYPE, 2) -#define GCMP_CCB_CFG_IOCUTYPE_CPU 0 -#define GCMP_CCB_CFG_IOCUTYPE_NCIOCU 1 -#define GCMP_CCB_CFG_IOCUTYPE_CIOCU 2 -#define GCMP_CCB_CFG_NUMVPE_SHF 0 -#define GCMP_CCB_CFG_NUMVPE_MSK GCMPCCBMSK(CFG_NUMVPE, 10) +#define GCMP_CCB_CFG_IOCUTYPE_SHF 10 +#define GCMP_CCB_CFG_IOCUTYPE_MSK GCMPCCBMSK(CFG_IOCUTYPE, 2) +#define GCMP_CCB_CFG_IOCUTYPE_CPU 0 +#define GCMP_CCB_CFG_IOCUTYPE_NCIOCU 1 +#define GCMP_CCB_CFG_IOCUTYPE_CIOCU 2 +#define GCMP_CCB_CFG_NUMVPE_SHF 0 +#define GCMP_CCB_CFG_NUMVPE_MSK GCMPCCBMSK(CFG_NUMVPE, 10) #define GCMP_CCB_OTHER_OFS 0x0018 /* Other Address */ -#define GCMP_CCB_OTHER_CORENUM_SHF 16 -#define GCMP_CCB_OTHER_CORENUM_MSK GCMPCCBMSK(OTHER_CORENUM, 16) +#define GCMP_CCB_OTHER_CORENUM_SHF 16 +#define GCMP_CCB_OTHER_CORENUM_MSK GCMPCCBMSK(OTHER_CORENUM, 16) #define GCMP_CCB_RESETBASE_OFS 0x0020 /* Reset Exception Base */ -#define GCMP_CCB_RESETBASE_BEV_SHF 12 -#define GCMP_CCB_RESETBASE_BEV_MSK GCMPCCBMSK(RESETBASE_BEV, 20) +#define GCMP_CCB_RESETBASE_BEV_SHF 12 +#define GCMP_CCB_RESETBASE_BEV_MSK GCMPCCBMSK(RESETBASE_BEV, 20) #define GCMP_CCB_ID_OFS 0x0028 /* Identification */ #define GCMP_CCB_DINTGROUP_OFS 0x0030 /* DINT Group Participate */ #define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */ diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index 37620db..bdc9786 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -66,7 +66,7 @@ /* Register Map for Shared Section */ -#define GIC_SH_CONFIG_OFS 0x0000 +#define GIC_SH_CONFIG_OFS 0x0000 /* Shared Global Counter */ #define GIC_SH_COUNTER_31_00_OFS 0x0010 @@ -146,13 +146,13 @@ #define GIC_SH_PEND_223_192_OFS 0x0498 #define GIC_SH_PEND_255_224_OFS 0x049c -#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500 +#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500 /* Maps Interrupt X to a Pin */ #define GIC_SH_MAP_TO_PIN(intr) \ (GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr)) -#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2000 +#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2000 /* Maps Interrupt X to a VPE */ #define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \ @@ -326,7 +326,7 @@ struct gic_intr_map { unsigned int polarity; /* Polarity : +/- */ unsigned int trigtype; /* Trigger : Edge/Levl */ unsigned int flags; /* Misc flags */ -#define GIC_FLAG_IPI 0x01 +#define GIC_FLAG_IPI 0x01 #define GIC_FLAG_TRANSPARENT 0x02 }; @@ -343,10 +343,10 @@ struct gic_shared_intr_map { /* GIC nomenclature for Core Interrupt Pins. */ #define GIC_CPU_INT0 0 /* Core Interrupt 2 */ -#define GIC_CPU_INT1 1 /* . */ -#define GIC_CPU_INT2 2 /* . */ -#define GIC_CPU_INT3 3 /* . */ -#define GIC_CPU_INT4 4 /* . */ +#define GIC_CPU_INT1 1 /* . */ +#define GIC_CPU_INT2 2 /* . */ +#define GIC_CPU_INT3 3 /* . */ +#define GIC_CPU_INT4 4 /* . */ #define GIC_CPU_INT5 5 /* Core Interrupt 5 */ /* Local GIC interrupts. */ @@ -359,6 +359,7 @@ struct gic_shared_intr_map { /* Mapped interrupt to pin X, then GIC will generate the vector (X+1). */ #define GIC_PIN_TO_VEC_OFFSET (1) +extern int gic_present; extern unsigned long _gic_base; extern unsigned int gic_irq_base; extern unsigned int gic_irq_flags[]; diff --git a/arch/mips/include/asm/gio_device.h b/arch/mips/include/asm/gio_device.h index 5437c84..0878701 100644 --- a/arch/mips/include/asm/gio_device.h +++ b/arch/mips/include/asm/gio_device.h @@ -6,15 +6,15 @@ struct gio_device_id { }; struct gio_device { - struct device dev; + struct device dev; struct resource resource; - unsigned int irq; - unsigned int slotno; + unsigned int irq; + unsigned int slotno; - const char *name; + const char *name; struct gio_device_id id; - unsigned id32:1; - unsigned gio64:1; + unsigned id32:1; + unsigned gio64:1; }; #define to_gio_device(d) container_of(d, struct gio_device, dev) @@ -50,7 +50,7 @@ static inline void gio_device_free(struct gio_device *dev) extern int gio_register_driver(struct gio_driver *); extern void gio_unregister_driver(struct gio_driver *); -#define gio_get_drvdata(_dev) drv_get_drvdata(&(_dev)->dev) +#define gio_get_drvdata(_dev) drv_get_drvdata(&(_dev)->dev) #define gio_set_drvdata(_dev, data) drv_set_drvdata(&(_dev)->dev, (data)) extern void gio_set_master(struct gio_device *); diff --git a/arch/mips/include/asm/gt64120.h b/arch/mips/include/asm/gt64120.h index 0aa44ab..2e72abb 100644 --- a/arch/mips/include/asm/gt64120.h +++ b/arch/mips/include/asm/gt64120.h @@ -34,7 +34,7 @@ #define GT_MULTI_OFS 0x120 -/* CPU Address Decode. */ +/* CPU Address Decode. */ #define GT_SCS10LD_OFS 0x008 #define GT_SCS10HD_OFS 0x010 #define GT_SCS32LD_OFS 0x018 @@ -106,12 +106,12 @@ #define GT_ADERR_OFS 0x470 -/* SDRAM Configuration. */ +/* SDRAM Configuration. */ #define GT_SDRAM_CFG_OFS 0x448 #define GT_SDRAM_OPMODE_OFS 0x474 #define GT_SDRAM_BM_OFS 0x478 -#define GT_SDRAM_ADDRDECODE_OFS 0x47c +#define GT_SDRAM_ADDRDECODE_OFS 0x47c /* SDRAM Parameters. */ #define GT_SDRAM_B0_OFS 0x44c @@ -126,14 +126,14 @@ #define GT_DEV_B3_OFS 0x468 #define GT_DEV_BOOT_OFS 0x46c -/* ECC. */ +/* ECC. */ #define GT_ECC_ERRDATALO 0x480 /* GT-64120A only */ #define GT_ECC_ERRDATAHI 0x484 /* GT-64120A only */ #define GT_ECC_MEM 0x488 /* GT-64120A only */ #define GT_ECC_CALC 0x48c /* GT-64120A only */ #define GT_ECC_ERRADDR 0x490 /* GT-64120A only */ -/* DMA Record. */ +/* DMA Record. */ #define GT_DMA0_CNT_OFS 0x800 #define GT_DMA1_CNT_OFS 0x804 #define GT_DMA2_CNT_OFS 0x808 @@ -156,13 +156,13 @@ #define GT_DMA2_CUR_OFS 0x878 #define GT_DMA3_CUR_OFS 0x87c -/* DMA Channel Control. */ +/* DMA Channel Control. */ #define GT_DMA0_CTRL_OFS 0x840 #define GT_DMA1_CTRL_OFS 0x844 #define GT_DMA2_CTRL_OFS 0x848 #define GT_DMA3_CTRL_OFS 0x84c -/* DMA Arbiter. */ +/* DMA Arbiter. */ #define GT_DMA_ARB_OFS 0x860 /* Timer/Counter. */ @@ -220,7 +220,7 @@ #define GT_PCI0_CFGADDR_OFS 0xcf8 #define GT_PCI0_CFGDATA_OFS 0xcfc -/* Interrupts. */ +/* Interrupts. */ #define GT_INTRCAUSE_OFS 0xc18 #define GT_INTRMASK_OFS 0xc1c @@ -547,15 +547,15 @@ #define GT_DEF_BASE 0x14000000UL #define GT_MAX_BANKSIZE (256 * 1024 * 1024) /* Max 256MB bank */ -#define GT_LATTIM_MIN 6 /* Minimum lat */ +#define GT_LATTIM_MIN 6 /* Minimum lat */ /* * The gt64120_dep.h file must define the following macros * * GT_READ(ofs, data_pointer) - * GT_WRITE(ofs, data) - read/write GT64120 registers in 32bit + * GT_WRITE(ofs, data) - read/write GT64120 registers in 32bit * - * TIMER - gt64120 timer irq, temporary solution until + * TIMER - gt64120 timer irq, temporary solution until * full gt64120 cascade interrupt support is in place */ diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index f0324e9..44d6a5b 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -25,7 +25,7 @@ static inline void name(void) \ } /* - * MIPS R2 instruction hazard barrier. Needs to be called as a subroutine. + * MIPS R2 instruction hazard barrier. Needs to be called as a subroutine. */ extern void mips_ihb(void); @@ -68,7 +68,7 @@ ASMMACRO(back_to_back_c0_hazard, ) /* * gcc has a tradition of misscompiling the previous construct using the - * address of a label as argument to inline assembler. Gas otoh has the + * address of a label as argument to inline assembler. Gas otoh has the * annoying difference between la and dla which are only usable for 32-bit * rsp. 64-bit code, so can't be used without conditional compilation. * The alterantive is switching the assembler to 64-bit code which happens @@ -114,7 +114,7 @@ ASMMACRO(back_to_back_c0_hazard, ) /* * gcc has a tradition of misscompiling the previous construct using the - * address of a label as argument to inline assembler. Gas otoh has the + * address of a label as argument to inline assembler. Gas otoh has the * annoying difference between la and dla which are only usable for 32-bit * rsp. 64-bit code, so can't be used without conditional compilation. * The alterantive is switching the assembler to 64-bit code which happens @@ -141,7 +141,7 @@ do { \ #elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \ - defined(CONFIG_CPU_R5500) + defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_XLR) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h index 2d91888..b0dd0c8 100644 --- a/arch/mips/include/asm/highmem.h +++ b/arch/mips/include/asm/highmem.h @@ -39,8 +39,8 @@ extern pte_t *pkmap_page_table; */ #define LAST_PKMAP 1024 #define LAST_PKMAP_MASK (LAST_PKMAP-1) -#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) +#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) extern void * kmap_high(struct page *page); extern void kunmap_high(struct page *page); diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h index 33c34adb..f1eadf7 100644 --- a/arch/mips/include/asm/inst.h +++ b/arch/mips/include/asm/inst.h @@ -11,353 +11,7 @@ #ifndef _ASM_INST_H #define _ASM_INST_H -/* - * Major opcodes; before MIPS IV cop1x was called cop3. - */ -enum major_op { - spec_op, bcond_op, j_op, jal_op, - beq_op, bne_op, blez_op, bgtz_op, - addi_op, addiu_op, slti_op, sltiu_op, - andi_op, ori_op, xori_op, lui_op, - cop0_op, cop1_op, cop2_op, cop1x_op, - beql_op, bnel_op, blezl_op, bgtzl_op, - daddi_op, daddiu_op, ldl_op, ldr_op, - spec2_op, jalx_op, mdmx_op, spec3_op, - lb_op, lh_op, lwl_op, lw_op, - lbu_op, lhu_op, lwr_op, lwu_op, - sb_op, sh_op, swl_op, sw_op, - sdl_op, sdr_op, swr_op, cache_op, - ll_op, lwc1_op, lwc2_op, pref_op, - lld_op, ldc1_op, ldc2_op, ld_op, - sc_op, swc1_op, swc2_op, major_3b_op, - scd_op, sdc1_op, sdc2_op, sd_op -}; - -/* - * func field of spec opcode. - */ -enum spec_op { - sll_op, movc_op, srl_op, sra_op, - sllv_op, pmon_op, srlv_op, srav_op, - jr_op, jalr_op, movz_op, movn_op, - syscall_op, break_op, spim_op, sync_op, - mfhi_op, mthi_op, mflo_op, mtlo_op, - dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op, - mult_op, multu_op, div_op, divu_op, - dmult_op, dmultu_op, ddiv_op, ddivu_op, - add_op, addu_op, sub_op, subu_op, - and_op, or_op, xor_op, nor_op, - spec3_unused_op, spec4_unused_op, slt_op, sltu_op, - dadd_op, daddu_op, dsub_op, dsubu_op, - tge_op, tgeu_op, tlt_op, tltu_op, - teq_op, spec5_unused_op, tne_op, spec6_unused_op, - dsll_op, spec7_unused_op, dsrl_op, dsra_op, - dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op -}; - -/* - * func field of spec2 opcode. - */ -enum spec2_op { - madd_op, maddu_op, mul_op, spec2_3_unused_op, - msub_op, msubu_op, /* more unused ops */ - clz_op = 0x20, clo_op, - dclz_op = 0x24, dclo_op, - sdbpp_op = 0x3f -}; - -/* - * func field of spec3 opcode. - */ -enum spec3_op { - ext_op, dextm_op, dextu_op, dext_op, - ins_op, dinsm_op, dinsu_op, dins_op, - lx_op = 0x0a, - bshfl_op = 0x20, - dbshfl_op = 0x24, - rdhwr_op = 0x3b -}; - -/* - * rt field of bcond opcodes. - */ -enum rt_op { - bltz_op, bgez_op, bltzl_op, bgezl_op, - spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07, - tgei_op, tgeiu_op, tlti_op, tltiu_op, - teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op, - bltzal_op, bgezal_op, bltzall_op, bgezall_op, - rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17, - rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b, - bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f -}; - -/* - * rs field of cop opcodes. - */ -enum cop_op { - mfc_op = 0x00, dmfc_op = 0x01, - cfc_op = 0x02, mtc_op = 0x04, - dmtc_op = 0x05, ctc_op = 0x06, - bc_op = 0x08, cop_op = 0x10, - copm_op = 0x18 -}; - -/* - * rt field of cop.bc_op opcodes - */ -enum bcop_op { - bcf_op, bct_op, bcfl_op, bctl_op -}; - -/* - * func field of cop0 coi opcodes. - */ -enum cop0_coi_func { - tlbr_op = 0x01, tlbwi_op = 0x02, - tlbwr_op = 0x06, tlbp_op = 0x08, - rfe_op = 0x10, eret_op = 0x18 -}; - -/* - * func field of cop0 com opcodes. - */ -enum cop0_com_func { - tlbr1_op = 0x01, tlbw_op = 0x02, - tlbp1_op = 0x08, dctr_op = 0x09, - dctw_op = 0x0a -}; - -/* - * fmt field of cop1 opcodes. - */ -enum cop1_fmt { - s_fmt, d_fmt, e_fmt, q_fmt, - w_fmt, l_fmt -}; - -/* - * func field of cop1 instructions using d, s or w format. - */ -enum cop1_sdw_func { - fadd_op = 0x00, fsub_op = 0x01, - fmul_op = 0x02, fdiv_op = 0x03, - fsqrt_op = 0x04, fabs_op = 0x05, - fmov_op = 0x06, fneg_op = 0x07, - froundl_op = 0x08, ftruncl_op = 0x09, - fceill_op = 0x0a, ffloorl_op = 0x0b, - fround_op = 0x0c, ftrunc_op = 0x0d, - fceil_op = 0x0e, ffloor_op = 0x0f, - fmovc_op = 0x11, fmovz_op = 0x12, - fmovn_op = 0x13, frecip_op = 0x15, - frsqrt_op = 0x16, fcvts_op = 0x20, - fcvtd_op = 0x21, fcvte_op = 0x22, - fcvtw_op = 0x24, fcvtl_op = 0x25, - fcmp_op = 0x30 -}; - -/* - * func field of cop1x opcodes (MIPS IV). - */ -enum cop1x_func { - lwxc1_op = 0x00, ldxc1_op = 0x01, - pfetch_op = 0x07, swxc1_op = 0x08, - sdxc1_op = 0x09, madd_s_op = 0x20, - madd_d_op = 0x21, madd_e_op = 0x22, - msub_s_op = 0x28, msub_d_op = 0x29, - msub_e_op = 0x2a, nmadd_s_op = 0x30, - nmadd_d_op = 0x31, nmadd_e_op = 0x32, - nmsub_s_op = 0x38, nmsub_d_op = 0x39, - nmsub_e_op = 0x3a -}; - -/* - * func field for mad opcodes (MIPS IV). - */ -enum mad_func { - madd_fp_op = 0x08, msub_fp_op = 0x0a, - nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e -}; - -/* - * func field for special3 lx opcodes (Cavium Octeon). - */ -enum lx_func { - lwx_op = 0x00, - lhx_op = 0x04, - lbux_op = 0x06, - ldx_op = 0x08, - lwux_op = 0x10, - lhux_op = 0x14, - lbx_op = 0x16, -}; - -/* - * Damn ... bitfields depend from byteorder :-( - */ -#ifdef __MIPSEB__ -struct j_format { /* Jump format */ - unsigned int opcode : 6; - unsigned int target : 26; -}; - -struct i_format { /* Immediate format (addi, lw, ...) */ - unsigned int opcode : 6; - unsigned int rs : 5; - unsigned int rt : 5; - signed int simmediate : 16; -}; - -struct u_format { /* Unsigned immediate format (ori, xori, ...) */ - unsigned int opcode : 6; - unsigned int rs : 5; - unsigned int rt : 5; - unsigned int uimmediate : 16; -}; - -struct c_format { /* Cache (>= R6000) format */ - unsigned int opcode : 6; - unsigned int rs : 5; - unsigned int c_op : 3; - unsigned int cache : 2; - unsigned int simmediate : 16; -}; - -struct r_format { /* Register format */ - unsigned int opcode : 6; - unsigned int rs : 5; - unsigned int rt : 5; - unsigned int rd : 5; - unsigned int re : 5; - unsigned int func : 6; -}; - -struct p_format { /* Performance counter format (R10000) */ - unsigned int opcode : 6; - unsigned int rs : 5; - unsigned int rt : 5; - unsigned int rd : 5; - unsigned int re : 5; - unsigned int func : 6; -}; - -struct f_format { /* FPU register format */ - unsigned int opcode : 6; - unsigned int : 1; - unsigned int fmt : 4; - unsigned int rt : 5; - unsigned int rd : 5; - unsigned int re : 5; - unsigned int func : 6; -}; - -struct ma_format { /* FPU multiply and add format (MIPS IV) */ - unsigned int opcode : 6; - unsigned int fr : 5; - unsigned int ft : 5; - unsigned int fs : 5; - unsigned int fd : 5; - unsigned int func : 4; - unsigned int fmt : 2; -}; - -struct b_format { /* BREAK and SYSCALL */ - unsigned int opcode:6; - unsigned int code:20; - unsigned int func:6; -}; - -#elif defined(__MIPSEL__) - -struct j_format { /* Jump format */ - unsigned int target : 26; - unsigned int opcode : 6; -}; - -struct i_format { /* Immediate format */ - signed int simmediate : 16; - unsigned int rt : 5; - unsigned int rs : 5; - unsigned int opcode : 6; -}; - -struct u_format { /* Unsigned immediate format */ - unsigned int uimmediate : 16; - unsigned int rt : 5; - unsigned int rs : 5; - unsigned int opcode : 6; -}; - -struct c_format { /* Cache (>= R6000) format */ - unsigned int simmediate : 16; - unsigned int cache : 2; - unsigned int c_op : 3; - unsigned int rs : 5; - unsigned int opcode : 6; -}; - -struct r_format { /* Register format */ - unsigned int func : 6; - unsigned int re : 5; - unsigned int rd : 5; - unsigned int rt : 5; - unsigned int rs : 5; - unsigned int opcode : 6; -}; - -struct p_format { /* Performance counter format (R10000) */ - unsigned int func : 6; - unsigned int re : 5; - unsigned int rd : 5; - unsigned int rt : 5; - unsigned int rs : 5; - unsigned int opcode : 6; -}; - -struct f_format { /* FPU register format */ - unsigned int func : 6; - unsigned int re : 5; - unsigned int rd : 5; - unsigned int rt : 5; - unsigned int fmt : 4; - unsigned int : 1; - unsigned int opcode : 6; -}; - -struct ma_format { /* FPU multiply and add format (MIPS IV) */ - unsigned int fmt : 2; - unsigned int func : 4; - unsigned int fd : 5; - unsigned int fs : 5; - unsigned int ft : 5; - unsigned int fr : 5; - unsigned int opcode : 6; -}; - -struct b_format { /* BREAK and SYSCALL */ - unsigned int func:6; - unsigned int code:20; - unsigned int opcode:6; -}; - -#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */ -#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?" -#endif - -union mips_instruction { - unsigned int word; - unsigned short halfword[2]; - unsigned char byte[4]; - struct j_format j_format; - struct i_format i_format; - struct u_format u_format; - struct c_format c_format; - struct r_format r_format; - struct p_format p_format; - struct f_format f_format; - struct ma_format ma_format; - struct b_format b_format; -}; +#include <uapi/asm/inst.h> /* HACHACHAHCAHC ... */ diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index ff2e034..1be1372 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -7,7 +7,7 @@ * Copyright (C) 1994 - 2000, 06 Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. - * Author: Maciej W. Rozycki <macro@mips.com> + * Author: Maciej W. Rozycki <macro@mips.com> */ #ifndef _ASM_IO_H #define _ASM_IO_H @@ -253,9 +253,9 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, __ioremap_mode((offset), (size), _CACHE_UNCACHED) /* - * ioremap_cachable - map bus memory into CPU space - * @offset: bus address of the memory - * @size: size of the resource to map + * ioremap_cachable - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map * * ioremap_nocache performs a platform specific sequence of operations to * make bus memory CPU accessible via the readb/readw/readl/writeb/ @@ -264,14 +264,14 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, * address. * * This version of ioremap ensures that the memory is marked cachable by - * the CPU. Also enables full write-combining. Useful for some + * the CPU. Also enables full write-combining. Useful for some * memory-like regions on I/O busses. */ #define ioremap_cachable(offset, size) \ __ioremap_mode((offset), (size), _page_cachable_default) /* - * These two are MIPS specific ioremap variant. ioremap_cacheable_cow + * These two are MIPS specific ioremap variant. ioremap_cacheable_cow * requests a cachable mapping, ioremap_uncached_accelerated requests a * mapping using the uncached accelerated mode which isn't supported on * all processors. @@ -298,7 +298,7 @@ static inline void iounmap(const volatile void __iomem *addr) } #ifdef CONFIG_CPU_CAVIUM_OCTEON -#define war_octeon_io_reorder_wmb() wmb() +#define war_octeon_io_reorder_wmb() wmb() #else #define war_octeon_io_reorder_wmb() do { } while (0) #endif @@ -317,7 +317,7 @@ static inline void pfx##write##bwlq(type val, \ \ __val = pfx##ioswab##bwlq(__mem, val); \ \ - if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ + if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ *__mem = __val; \ else if (cpu_has_64bits) { \ unsigned long __flags; \ @@ -327,9 +327,9 @@ static inline void pfx##write##bwlq(type val, \ local_irq_save(__flags); \ __asm__ __volatile__( \ ".set mips3" "\t\t# __writeq""\n\t" \ - "dsll32 %L0, %L0, 0" "\n\t" \ - "dsrl32 %L0, %L0, 0" "\n\t" \ - "dsll32 %M0, %M0, 0" "\n\t" \ + "dsll32 %L0, %L0, 0" "\n\t" \ + "dsrl32 %L0, %L0, 0" "\n\t" \ + "dsll32 %M0, %M0, 0" "\n\t" \ "or %L0, %L0, %M0" "\n\t" \ "sd %L0, %2" "\n\t" \ ".set mips0" "\n" \ @@ -348,7 +348,7 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ \ __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ \ - if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ + if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ __val = *__mem; \ else if (cpu_has_64bits) { \ unsigned long __flags; \ @@ -356,9 +356,9 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ if (irq) \ local_irq_save(__flags); \ __asm__ __volatile__( \ - ".set mips3" "\t\t# __readq" "\n\t" \ + ".set mips3" "\t\t# __readq" "\n\t" \ "ld %L0, %1" "\n\t" \ - "dsra32 %M0, %L0, 0" "\n\t" \ + "dsra32 %M0, %L0, 0" "\n\t" \ "sll %L0, %L0, 0" "\n\t" \ ".set mips0" "\n" \ : "=r" (__val) \ @@ -586,7 +586,7 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); #else /* Sane hardware */ -#define dma_cache_wback_inv(start,size) \ +#define dma_cache_wback_inv(start,size) \ do { (void) (start); (void) (size); } while (0) #define dma_cache_wback(start,size) \ do { (void) (start); (void) (size); } while (0) diff --git a/arch/mips/include/asm/ip32/crime.h b/arch/mips/include/asm/ip32/crime.h index 7c36b0e..16c94a2 100644 --- a/arch/mips/include/asm/ip32/crime.h +++ b/arch/mips/include/asm/ip32/crime.h @@ -74,7 +74,7 @@ struct sgi_crime { #define CRIME_RE_IDLE_E_INT BIT(24) #define CRIME_RE_EMPTY_L_INT BIT(25) #define CRIME_RE_FULL_L_INT BIT(26) -#define CRIME_RE_IDLE_L_INT BIT(27) +#define CRIME_RE_IDLE_L_INT BIT(27) #define CRIME_SOFT0_INT BIT(28) #define CRIME_SOFT1_INT BIT(29) #define CRIME_SOFT2_INT BIT(30) @@ -118,7 +118,7 @@ struct sgi_crime { #define CRIME_MEM_REF_COUNTER_MASK 0x3ff /* 10bit */ volatile unsigned long mem_error_stat; -#define CRIME_MEM_ERROR_STAT_MASK 0x0ff7ffff /* 28-bit register */ +#define CRIME_MEM_ERROR_STAT_MASK 0x0ff7ffff /* 28-bit register */ #define CRIME_MEM_ERROR_MACE_ID 0x0000007f #define CRIME_MEM_ERROR_MACE_ACCESS 0x00000080 #define CRIME_MEM_ERROR_RE_ID 0x00007f00 @@ -134,8 +134,8 @@ struct sgi_crime { #define CRIME_MEM_ERROR_MEM_ECC_RD 0x00800000 #define CRIME_MEM_ERROR_MEM_ECC_RMW 0x01000000 #define CRIME_MEM_ERROR_INV 0x0e000000 -#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD 0x02000000 -#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR 0x04000000 +#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD 0x02000000 +#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR 0x04000000 #define CRIME_MEM_ERROR_INV_MEM_ADDR_RMW 0x08000000 volatile unsigned long mem_error_addr; diff --git a/arch/mips/include/asm/ip32/ip32_ints.h b/arch/mips/include/asm/ip32/ip32_ints.h index 85bc530..72e3368 100644 --- a/arch/mips/include/asm/ip32/ip32_ints.h +++ b/arch/mips/include/asm/ip32/ip32_ints.h @@ -13,7 +13,7 @@ /* * This list reflects the assignment of interrupt numbers to - * interrupting events. Order is fairly irrelevant to handling + * interrupting events. Order is fairly irrelevant to handling * priority. This differs from irix. */ diff --git a/arch/mips/include/asm/ip32/mace.h b/arch/mips/include/asm/ip32/mace.h index c523123..253ed7e 100644 --- a/arch/mips/include/asm/ip32/mace.h +++ b/arch/mips/include/asm/ip32/mace.h @@ -250,12 +250,12 @@ struct mace_ps2 { * -> drivers/i2c/algos/i2c-algo-sgi.c */ struct mace_i2c { volatile unsigned long config; -#define MACEI2C_RESET BIT(0) -#define MACEI2C_FAST BIT(1) -#define MACEI2C_DATA_OVERRIDE BIT(2) -#define MACEI2C_CLOCK_OVERRIDE BIT(3) -#define MACEI2C_DATA_STATUS BIT(4) -#define MACEI2C_CLOCK_STATUS BIT(5) +#define MACEI2C_RESET BIT(0) +#define MACEI2C_FAST BIT(1) +#define MACEI2C_DATA_OVERRIDE BIT(2) +#define MACEI2C_CLOCK_OVERRIDE BIT(3) +#define MACEI2C_DATA_STATUS BIT(4) +#define MACEI2C_CLOCK_STATUS BIT(5) volatile unsigned long control; volatile unsigned long data; }; diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index 78dbb8a..7bc2cdb 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -32,7 +32,7 @@ struct irqaction; extern unsigned long irq_hwmask[]; extern int setup_irq_smtc(unsigned int irq, struct irqaction * new, - unsigned long hwmask); + unsigned long hwmask); static inline void smtc_im_ack_irq(unsigned int irq) { @@ -60,7 +60,7 @@ extern void smtc_forward_irq(struct irq_data *d); * if option is enabled. * * Up through Linux 2.6.22 (at least) cpumask operations are very - * inefficient on MIPS. Initial prototypes of SMTC IRQ affinity + * inefficient on MIPS. Initial prototypes of SMTC IRQ affinity * used a "fast path" per-IRQ-descriptor cache of affinity information * to reduce latency. As there is a project afoot to optimize the * cpumask implementations, this version is optimistically assuming @@ -133,7 +133,7 @@ extern void free_irqno(unsigned int irq); /* * Before R2 the timer and performance counter interrupts were both fixed to - * IE7. Since R2 their number has to be read from the c0_intctl register. + * IE7. Since R2 their number has to be read from the c0_intctl register. */ #define CP0_LEGACY_COMPARE_IRQ 7 #define CP0_LEGACY_PERFCNT_IRQ 7 diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h index ef6a07c..3f11fdb 100644 --- a/arch/mips/include/asm/irq_cpu.h +++ b/arch/mips/include/asm/irq_cpu.h @@ -17,4 +17,10 @@ extern void mips_cpu_irq_init(void); extern void rm7k_cpu_irq_init(void); extern void rm9k_cpu_irq_init(void); +#ifdef CONFIG_IRQ_DOMAIN +struct device_node; +extern int mips_cpu_intc_init(struct device_node *of_node, + struct device_node *parent); +#endif + #endif /* _ASM_IRQ_CPU_H */ diff --git a/arch/mips/include/asm/isadep.h b/arch/mips/include/asm/isadep.h index 24c6cda..b4af6eb 100644 --- a/arch/mips/include/asm/isadep.h +++ b/arch/mips/include/asm/isadep.h @@ -18,7 +18,7 @@ * kernel or user mode? (CP0_STATUS) */ #define KU_MASK 0x08 -#define KU_USER 0x08 +#define KU_USER 0x08 #define KU_KERN 0x00 #else @@ -26,7 +26,7 @@ * kernel or user mode? */ #define KU_MASK 0x18 -#define KU_USER 0x10 +#define KU_USER 0x10 #define KU_KERN 0x00 #endif diff --git a/arch/mips/include/asm/jazz.h b/arch/mips/include/asm/jazz.h index 83f449d..a61970d 100644 --- a/arch/mips/include/asm/jazz.h +++ b/arch/mips/include/asm/jazz.h @@ -16,7 +16,7 @@ * instead of 0xe0000000. */ -#define JAZZ_LOCAL_IO_SPACE 0xe0000000 +#define JAZZ_LOCAL_IO_SPACE 0xe0000000 /* * Revision numbers in PICA_ASIC_REVISION @@ -25,24 +25,24 @@ * 0xf0000001 - Rev2 * 0xf0000002 - Rev3 */ -#define PICA_ASIC_REVISION 0xe0000008 +#define PICA_ASIC_REVISION 0xe0000008 /* * The segments of the seven segment LED are mapped * to the control bits as follows: * - * (7) - * --------- - * | | - * (2) | | (6) - * | (1) | - * --------- - * | | - * (3) | | (5) - * | (4) | - * --------- . (0) + * (7) + * --------- + * | | + * (2) | | (6) + * | (1) | + * --------- + * | | + * (3) | | (5) + * | (4) | + * --------- . (0) */ -#define PICA_LED 0xe000f000 +#define PICA_LED 0xe000f000 /* * Some characters for the LED control registers @@ -51,24 +51,24 @@ * control each of the seven segments and the dot independently. * It's only a toy, anyway... */ -#define LED_DOT 0x01 -#define LED_SPACE 0x00 -#define LED_0 0xfc -#define LED_1 0x60 -#define LED_2 0xda -#define LED_3 0xf2 -#define LED_4 0x66 -#define LED_5 0xb6 -#define LED_6 0xbe -#define LED_7 0xe0 -#define LED_8 0xfe -#define LED_9 0xf6 -#define LED_A 0xee -#define LED_b 0x3e -#define LED_C 0x9c -#define LED_d 0x7a -#define LED_E 0x9e -#define LED_F 0x8e +#define LED_DOT 0x01 +#define LED_SPACE 0x00 +#define LED_0 0xfc +#define LED_1 0x60 +#define LED_2 0xda +#define LED_3 0xf2 +#define LED_4 0x66 +#define LED_5 0xb6 +#define LED_6 0xbe +#define LED_7 0xe0 +#define LED_8 0xfe +#define LED_9 0xf6 +#define LED_A 0xee +#define LED_b 0x3e +#define LED_C 0x9c +#define LED_d 0x7a +#define LED_E 0x9e +#define LED_F 0x8e #ifndef __ASSEMBLY__ @@ -96,9 +96,9 @@ static __inline__ void pica_set_led(unsigned int bits) * This address is just a guess and seems to differ from * other mips machines such as RC3xxx... */ -#define JAZZ_KEYBOARD_ADDRESS 0xe0005000 -#define JAZZ_KEYBOARD_DATA 0xe0005000 -#define JAZZ_KEYBOARD_COMMAND 0xe0005001 +#define JAZZ_KEYBOARD_ADDRESS 0xe0005000 +#define JAZZ_KEYBOARD_DATA 0xe0005000 +#define JAZZ_KEYBOARD_COMMAND 0xe0005001 #ifndef __ASSEMBLY__ @@ -119,28 +119,28 @@ typedef struct { /* * For now. Needs to be changed for RC3xxx support. See below. */ -#define keyboard_hardware jazz_keyboard_hardware +#define keyboard_hardware jazz_keyboard_hardware #endif /* !__ASSEMBLY__ */ /* * i8042 keyboard controller for most other Mips machines. */ -#define MIPS_KEYBOARD_ADDRESS 0xb9005000 -#define MIPS_KEYBOARD_DATA 0xb9005003 -#define MIPS_KEYBOARD_COMMAND 0xb9005007 +#define MIPS_KEYBOARD_ADDRESS 0xb9005000 +#define MIPS_KEYBOARD_DATA 0xb9005003 +#define MIPS_KEYBOARD_COMMAND 0xb9005007 /* * Serial and parallel ports (WD 16C552) on the Mips JAZZ */ -#define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000 -#define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000 -#define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000 +#define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000 +#define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000 +#define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000 /* * Dummy Device Address. Used in jazzdma.c */ -#define JAZZ_DUMMY_DEVICE 0xe000d000 +#define JAZZ_DUMMY_DEVICE 0xe000d000 /* * JAZZ timer registers and interrupt no. @@ -148,8 +148,8 @@ typedef struct { * cpu level 6, but to keep compatibility with PC stuff * it is remapped to vector 0. See arch/mips/kernel/entry.S. */ -#define JAZZ_TIMER_INTERVAL 0xe0000228 -#define JAZZ_TIMER_REGISTER 0xe0000230 +#define JAZZ_TIMER_INTERVAL 0xe0000228 +#define JAZZ_TIMER_REGISTER 0xe0000230 /* * DRAM configuration register @@ -176,13 +176,13 @@ typedef struct { #endif #endif /* !__ASSEMBLY__ */ -#define PICA_DRAM_CONFIG 0xe00fffe0 +#define PICA_DRAM_CONFIG 0xe00fffe0 /* * JAZZ interrupt control registers */ -#define JAZZ_IO_IRQ_SOURCE 0xe0010000 -#define JAZZ_IO_IRQ_ENABLE 0xe0010002 +#define JAZZ_IO_IRQ_SOURCE 0xe0010000 +#define JAZZ_IO_IRQ_ENABLE 0xe0010002 /* * JAZZ Interrupt Level definitions @@ -190,20 +190,20 @@ typedef struct { * This is somewhat broken. For reasons which nobody can remember anymore * we remap the Jazz interrupts to the usual ISA style interrupt numbers. */ -#define JAZZ_IRQ_START 24 -#define JAZZ_IRQ_END (24 + 9) -#define JAZZ_PARALLEL_IRQ (JAZZ_IRQ_START + 0) -#define JAZZ_FLOPPY_IRQ (JAZZ_IRQ_START + 1) -#define JAZZ_SOUND_IRQ (JAZZ_IRQ_START + 2) -#define JAZZ_VIDEO_IRQ (JAZZ_IRQ_START + 3) -#define JAZZ_ETHERNET_IRQ (JAZZ_IRQ_START + 4) -#define JAZZ_SCSI_IRQ (JAZZ_IRQ_START + 5) -#define JAZZ_KEYBOARD_IRQ (JAZZ_IRQ_START + 6) -#define JAZZ_MOUSE_IRQ (JAZZ_IRQ_START + 7) -#define JAZZ_SERIAL1_IRQ (JAZZ_IRQ_START + 8) -#define JAZZ_SERIAL2_IRQ (JAZZ_IRQ_START + 9) - -#define JAZZ_TIMER_IRQ (MIPS_CPU_IRQ_BASE+6) +#define JAZZ_IRQ_START 24 +#define JAZZ_IRQ_END (24 + 9) +#define JAZZ_PARALLEL_IRQ (JAZZ_IRQ_START + 0) +#define JAZZ_FLOPPY_IRQ (JAZZ_IRQ_START + 1) +#define JAZZ_SOUND_IRQ (JAZZ_IRQ_START + 2) +#define JAZZ_VIDEO_IRQ (JAZZ_IRQ_START + 3) +#define JAZZ_ETHERNET_IRQ (JAZZ_IRQ_START + 4) +#define JAZZ_SCSI_IRQ (JAZZ_IRQ_START + 5) +#define JAZZ_KEYBOARD_IRQ (JAZZ_IRQ_START + 6) +#define JAZZ_MOUSE_IRQ (JAZZ_IRQ_START + 7) +#define JAZZ_SERIAL1_IRQ (JAZZ_IRQ_START + 8) +#define JAZZ_SERIAL2_IRQ (JAZZ_IRQ_START + 9) + +#define JAZZ_TIMER_IRQ (MIPS_CPU_IRQ_BASE+6) /* @@ -211,46 +211,46 @@ typedef struct { * Note: Channels 4...7 are not used with respect to the Acer PICA-61 * chipset which does not provide these DMA channels. */ -#define JAZZ_SCSI_DMA 0 /* SCSI */ -#define JAZZ_FLOPPY_DMA 1 /* FLOPPY */ -#define JAZZ_AUDIOL_DMA 2 /* AUDIO L */ -#define JAZZ_AUDIOR_DMA 3 /* AUDIO R */ +#define JAZZ_SCSI_DMA 0 /* SCSI */ +#define JAZZ_FLOPPY_DMA 1 /* FLOPPY */ +#define JAZZ_AUDIOL_DMA 2 /* AUDIO L */ +#define JAZZ_AUDIOR_DMA 3 /* AUDIO R */ /* * JAZZ R4030 MCT_ADR chip (DMA controller) * Note: Virtual Addresses ! */ #define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */ -#define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */ +#define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */ #define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */ -#define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */ -#define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */ -#define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */ +#define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */ +#define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */ +#define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */ -#define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */ -#define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */ -#define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */ +#define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */ +#define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */ +#define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */ -#define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */ -#define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */ -#define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */ -#define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */ +#define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */ +#define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */ +#define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */ +#define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */ /* * Remote Speed Registers. * - * 0: free, 1: Ethernet, 2: SCSI, 3: Floppy, - * 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2, - * 8: parallel, 9: NVRAM, 10: CPU, 11: PROM, + * 0: free, 1: Ethernet, 2: SCSI, 3: Floppy, + * 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2, + * 8: parallel, 9: NVRAM, 10: CPU, 11: PROM, * 12: reserved, 13: free, 14: 7seg LED, 15: ??? */ #define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */ /* 0xE0000070,78,80... 0xE00000E8 */ -#define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */ -#define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */ -#define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */ -#define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */ +#define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */ +#define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */ +#define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */ +#define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */ /* * Virtual (E)ISA controller address diff --git a/arch/mips/include/asm/jazzdma.h b/arch/mips/include/asm/jazzdma.h index 8bb37bb..2cefc3c 100644 --- a/arch/mips/include/asm/jazzdma.h +++ b/arch/mips/include/asm/jazzdma.h @@ -10,7 +10,7 @@ extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size); extern int vdma_free(unsigned long laddr); extern int vdma_remap(unsigned long laddr, unsigned long paddr, - unsigned long size); + unsigned long size); extern unsigned long vdma_phys2log(unsigned long paddr); extern unsigned long vdma_log2phys(unsigned long laddr); extern void vdma_stats(void); /* for debugging only */ @@ -35,14 +35,14 @@ extern int vdma_get_enable(int channel); * Macros to get page no. and offset of a given address * Note that VDMA_PAGE() works for physical addresses only */ -#define VDMA_PAGE(a) ((unsigned int)(a) >> 12) -#define VDMA_OFFSET(a) ((unsigned int)(a) & (VDMA_PAGESIZE-1)) +#define VDMA_PAGE(a) ((unsigned int)(a) >> 12) +#define VDMA_OFFSET(a) ((unsigned int)(a) & (VDMA_PAGESIZE-1)) /* * error code returned by vdma_alloc() * (See also arch/mips/kernel/jazzdma.c) */ -#define VDMA_ERROR 0xffffffff +#define VDMA_ERROR 0xffffffff /* * VDMA pagetable entry description @@ -59,37 +59,37 @@ typedef volatile struct VDMA_PGTBL_ENTRY { */ #define JAZZ_R4030_CHNL_MODE 0xE0000100 /* 8 DMA Channel Mode Registers, */ /* 0xE0000100,120,140... */ -#define JAZZ_R4030_CHNL_ENABLE 0xE0000108 /* 8 DMA Channel Enable Regs, */ +#define JAZZ_R4030_CHNL_ENABLE 0xE0000108 /* 8 DMA Channel Enable Regs, */ /* 0xE0000108,128,148... */ -#define JAZZ_R4030_CHNL_COUNT 0xE0000110 /* 8 DMA Channel Byte Cnt Regs, */ +#define JAZZ_R4030_CHNL_COUNT 0xE0000110 /* 8 DMA Channel Byte Cnt Regs, */ /* 0xE0000110,130,150... */ #define JAZZ_R4030_CHNL_ADDR 0xE0000118 /* 8 DMA Channel Address Regs, */ /* 0xE0000118,138,158... */ /* channel enable register bits */ -#define R4030_CHNL_ENABLE (1<<0) -#define R4030_CHNL_WRITE (1<<1) -#define R4030_TC_INTR (1<<8) -#define R4030_MEM_INTR (1<<9) -#define R4030_ADDR_INTR (1<<10) +#define R4030_CHNL_ENABLE (1<<0) +#define R4030_CHNL_WRITE (1<<1) +#define R4030_TC_INTR (1<<8) +#define R4030_MEM_INTR (1<<9) +#define R4030_ADDR_INTR (1<<10) /* * Channel mode register bits */ -#define R4030_MODE_ATIME_40 (0) /* device access time on remote bus */ -#define R4030_MODE_ATIME_80 (1) -#define R4030_MODE_ATIME_120 (2) -#define R4030_MODE_ATIME_160 (3) -#define R4030_MODE_ATIME_200 (4) -#define R4030_MODE_ATIME_240 (5) -#define R4030_MODE_ATIME_280 (6) -#define R4030_MODE_ATIME_320 (7) -#define R4030_MODE_WIDTH_8 (1<<3) /* device data bus width */ -#define R4030_MODE_WIDTH_16 (2<<3) -#define R4030_MODE_WIDTH_32 (3<<3) -#define R4030_MODE_INTR_EN (1<<5) -#define R4030_MODE_BURST (1<<6) /* Rev. 2 only */ -#define R4030_MODE_FAST_ACK (1<<7) /* Rev. 2 only */ +#define R4030_MODE_ATIME_40 (0) /* device access time on remote bus */ +#define R4030_MODE_ATIME_80 (1) +#define R4030_MODE_ATIME_120 (2) +#define R4030_MODE_ATIME_160 (3) +#define R4030_MODE_ATIME_200 (4) +#define R4030_MODE_ATIME_240 (5) +#define R4030_MODE_ATIME_280 (6) +#define R4030_MODE_ATIME_320 (7) +#define R4030_MODE_WIDTH_8 (1<<3) /* device data bus width */ +#define R4030_MODE_WIDTH_16 (2<<3) +#define R4030_MODE_WIDTH_32 (3<<3) +#define R4030_MODE_INTR_EN (1<<5) +#define R4030_MODE_BURST (1<<6) /* Rev. 2 only */ +#define R4030_MODE_FAST_ACK (1<<7) /* Rev. 2 only */ #endif /* _ASM_JAZZDMA_H */ diff --git a/arch/mips/include/asm/kmap_types.h b/arch/mips/include/asm/kmap_types.h index 58e91ed..c1909dc 100644 --- a/arch/mips/include/asm/kmap_types.h +++ b/arch/mips/include/asm/kmap_types.h @@ -2,7 +2,7 @@ #define _ASM_KMAP_TYPES_H #ifdef CONFIG_DEBUG_HIGHMEM -#define __WITH_KM_FENCE +#define __WITH_KM_FENCE #endif #include <asm-generic/kmap_types.h> diff --git a/arch/mips/include/asm/kprobes.h b/arch/mips/include/asm/kprobes.h index 1fbbca0..daba1f9 100644 --- a/arch/mips/include/asm/kprobes.h +++ b/arch/mips/include/asm/kprobes.h @@ -29,7 +29,7 @@ #include <asm/kdebug.h> #include <asm/inst.h> -#define __ARCH_WANT_KPROBES_INSN_SLOT +#define __ARCH_WANT_KPROBES_INSN_SLOT struct kprobe; struct pt_regs; diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h index 3dac2036..d918b82 100644 --- a/arch/mips/include/asm/lasat/eeprom.h +++ b/arch/mips/include/asm/lasat/eeprom.h @@ -1,12 +1,12 @@ #include <asm/addrspace.h> /* lasat 100 */ -#define AT93C_REG_100 KSEG1ADDR(0x1c810000) -#define AT93C_RDATA_REG_100 AT93C_REG_100 -#define AT93C_RDATA_SHIFT_100 4 -#define AT93C_WDATA_SHIFT_100 4 -#define AT93C_CS_M_100 (1 << 5) -#define AT93C_CLK_M_100 (1 << 3) +#define AT93C_REG_100 KSEG1ADDR(0x1c810000) +#define AT93C_RDATA_REG_100 AT93C_REG_100 +#define AT93C_RDATA_SHIFT_100 4 +#define AT93C_WDATA_SHIFT_100 4 +#define AT93C_CS_M_100 (1 << 5) +#define AT93C_CLK_M_100 (1 << 3) /* lasat 200 */ #define AT93C_REG_200 KSEG1ADDR(0x11000000) diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h index e8ff70f..9e32b4d 100644 --- a/arch/mips/include/asm/lasat/lasat.h +++ b/arch/mips/include/asm/lasat/lasat.h @@ -100,7 +100,7 @@ struct lasat_eeprom_struct_pre7 { /* Configuration descriptor encoding - see the doc for details */ -#define LASAT_W0_DSCTYPE(v) (((v)) & 0xf) +#define LASAT_W0_DSCTYPE(v) (((v)) & 0xf) #define LASAT_W0_BMID(v) (((v) >> 0x04) & 0xf) #define LASAT_W0_CPUTYPE(v) (((v) >> 0x08) & 0xf) #define LASAT_W0_BUSSPEED(v) (((v) >> 0x0c) & 0xf) @@ -109,7 +109,7 @@ struct lasat_eeprom_struct_pre7 { #define LASAT_W0_SDRAMBANKS(v) (((v) >> 0x18) & 0xf) #define LASAT_W0_L2CACHE(v) (((v) >> 0x1c) & 0xf) -#define LASAT_W1_EDHAC(v) (((v)) & 0xf) +#define LASAT_W1_EDHAC(v) (((v)) & 0xf) #define LASAT_W1_HIFN(v) (((v) >> 0x04) & 0x1) #define LASAT_W1_ISDN(v) (((v) >> 0x05) & 0x1) #define LASAT_W1_IDE(v) (((v) >> 0x06) & 0x1) @@ -239,7 +239,7 @@ static inline void lasat_ndelay(unsigned int ns) __delay(ns / lasat_ndelay_divider); } -#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000) +#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000) #endif /* !defined (_LANGUAGE_ASSEMBLY) */ @@ -247,11 +247,11 @@ static inline void lasat_ndelay(unsigned int ns) #define LASAT_SERVICEMODE_MAGIC_2 0xfedeabba /* Lasat 100 boards */ -#define LASAT_GT_BASE (KSEG1ADDR(0x14000000)) +#define LASAT_GT_BASE (KSEG1ADDR(0x14000000)) /* Lasat 200 boards */ -#define Vrc5074_PHYS_BASE 0x1fa00000 -#define Vrc5074_BASE (KSEG1ADDR(Vrc5074_PHYS_BASE)) -#define PCI_WINDOW1 0x1a000000 +#define Vrc5074_PHYS_BASE 0x1fa00000 +#define Vrc5074_BASE (KSEG1ADDR(Vrc5074_PHYS_BASE)) +#define PCI_WINDOW1 0x1a000000 #endif /* _LASAT_H */ diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h index 1c37d70..a2f6c7a 100644 --- a/arch/mips/include/asm/lasat/serial.h +++ b/arch/mips/include/asm/lasat/serial.h @@ -1,7 +1,7 @@ #include <asm/lasat/lasat.h> /* Lasat 100 boards serial configuration */ -#define LASAT_BASE_BAUD_100 (7372800 / 16) +#define LASAT_BASE_BAUD_100 (7372800 / 16) #define LASAT_UART_REGS_BASE_100 0x1c8b0000 #define LASAT_UART_REGS_SHIFT_100 2 #define LASATINT_UART_100 16 diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h index 94fde8d..d44622c 100644 --- a/arch/mips/include/asm/local.h +++ b/arch/mips/include/asm/local.h @@ -15,10 +15,10 @@ typedef struct #define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) } #define local_read(l) atomic_long_read(&(l)->a) -#define local_set(l, i) atomic_long_set(&(l)->a, (i)) +#define local_set(l, i) atomic_long_set(&(l)->a, (i)) -#define local_add(i, l) atomic_long_add((i), (&(l)->a)) -#define local_sub(i, l) atomic_long_sub((i), (&(l)->a)) +#define local_add(i, l) atomic_long_add((i), (&(l)->a)) +#define local_sub(i, l) atomic_long_sub((i), (&(l)->a)) #define local_inc(l) atomic_long_inc(&(l)->a) #define local_dec(l) atomic_long_dec(&(l)->a) diff --git a/arch/mips/include/asm/m48t37.h b/arch/mips/include/asm/m48t37.h index cabf862..e6eaf53 100644 --- a/arch/mips/include/asm/m48t37.h +++ b/arch/mips/include/asm/m48t37.h @@ -9,7 +9,7 @@ extern spinlock_t rtc_lock; struct m48t37_rtc { - volatile u8 pad[0x7ff0]; /* NVRAM */ + volatile u8 pad[0x7ff0]; /* NVRAM */ volatile u8 flags; volatile u8 century; volatile u8 alarm_sec; diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h index 07d3fad..a47ea0c 100644 --- a/arch/mips/include/asm/mach-ar7/ar7.h +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -40,9 +40,9 @@ #define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) #define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C) -#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) +#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) -#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) +#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) #define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) @@ -52,7 +52,7 @@ #define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) /* Titan registers */ -#define TITAN_REGS_ESWITCH_BASE (0x08640000) +#define TITAN_REGS_ESWITCH_BASE (0x08640000) #define TITAN_REGS_MAC0 (TITAN_REGS_ESWITCH_BASE) #define TITAN_REGS_MAC1 (TITAN_REGS_ESWITCH_BASE + 0x0800) #define TITAN_REGS_MDIO (TITAN_REGS_ESWITCH_BASE + 0x02000) @@ -72,9 +72,9 @@ /* GPIO control registers */ #define AR7_GPIO_INPUT 0x0 -#define AR7_GPIO_OUTPUT 0x4 +#define AR7_GPIO_OUTPUT 0x4 #define AR7_GPIO_DIR 0x8 -#define AR7_GPIO_ENABLE 0xc +#define AR7_GPIO_ENABLE 0xc #define TITAN_GPIO_INPUT_0 0x0 #define TITAN_GPIO_INPUT_1 0x4 #define TITAN_GPIO_OUTPUT_0 0x8 @@ -88,10 +88,10 @@ #define AR7_CHIP_7200 0x2b #define AR7_CHIP_7300 0x05 #define AR7_CHIP_TITAN 0x07 -#define TITAN_CHIP_1050 0x0f -#define TITAN_CHIP_1055 0x0e -#define TITAN_CHIP_1056 0x0d -#define TITAN_CHIP_1060 0x07 +#define TITAN_CHIP_1050 0x0f +#define TITAN_CHIP_1055 0x0e +#define TITAN_CHIP_1056 0x0d +#define TITAN_CHIP_1060 0x07 /* Interrupts */ #define AR7_IRQ_UART0 15 diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h index 39e9757..7ad10e3 100644 --- a/arch/mips/include/asm/mach-ar7/irq.h +++ b/arch/mips/include/asm/mach-ar7/irq.h @@ -9,7 +9,7 @@ #ifndef __ASM_AR7_IRQ_H #define __ASM_AR7_IRQ_H -#define NR_IRQS 256 +#define NR_IRQS 256 #include_next <irq.h> diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h index a5e0f17..b86a125 100644 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h @@ -34,18 +34,44 @@ #define AR71XX_UART_SIZE 0x100 #define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) #define AR71XX_USB_CTRL_SIZE 0x100 -#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) -#define AR71XX_GPIO_SIZE 0x100 +#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) +#define AR71XX_GPIO_SIZE 0x100 #define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) #define AR71XX_PLL_SIZE 0x100 #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) #define AR71XX_RESET_SIZE 0x100 +#define AR71XX_PCI_MEM_BASE 0x10000000 +#define AR71XX_PCI_MEM_SIZE 0x07000000 + +#define AR71XX_PCI_WIN0_OFFS 0x10000000 +#define AR71XX_PCI_WIN1_OFFS 0x11000000 +#define AR71XX_PCI_WIN2_OFFS 0x12000000 +#define AR71XX_PCI_WIN3_OFFS 0x13000000 +#define AR71XX_PCI_WIN4_OFFS 0x14000000 +#define AR71XX_PCI_WIN5_OFFS 0x15000000 +#define AR71XX_PCI_WIN6_OFFS 0x16000000 +#define AR71XX_PCI_WIN7_OFFS 0x07000000 + +#define AR71XX_PCI_CFG_BASE \ + (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000) +#define AR71XX_PCI_CFG_SIZE 0x100 + #define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) #define AR7240_USB_CTRL_SIZE 0x100 #define AR7240_OHCI_BASE 0x1b000000 #define AR7240_OHCI_SIZE 0x1000 +#define AR724X_PCI_MEM_BASE 0x10000000 +#define AR724X_PCI_MEM_SIZE 0x04000000 + +#define AR724X_PCI_CFG_BASE 0x14000000 +#define AR724X_PCI_CFG_SIZE 0x1000 +#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000) +#define AR724X_PCI_CRP_SIZE 0x1000 +#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000) +#define AR724X_PCI_CTRL_SIZE 0x100 + #define AR724X_EHCI_BASE 0x1b000000 #define AR724X_EHCI_SIZE 0x1000 @@ -68,6 +94,25 @@ #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) #define AR934X_SRIF_SIZE 0x1000 +#define QCA955X_PCI_MEM_BASE0 0x10000000 +#define QCA955X_PCI_MEM_BASE1 0x12000000 +#define QCA955X_PCI_MEM_SIZE 0x02000000 +#define QCA955X_PCI_CFG_BASE0 0x14000000 +#define QCA955X_PCI_CFG_BASE1 0x16000000 +#define QCA955X_PCI_CFG_SIZE 0x1000 +#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000) +#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000) +#define QCA955X_PCI_CRP_SIZE 0x1000 +#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000) +#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) +#define QCA955X_PCI_CTRL_SIZE 0x100 + +#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) +#define QCA955X_WMAC_SIZE 0x20000 +#define QCA955X_EHCI0_BASE 0x1b000000 +#define QCA955X_EHCI1_BASE 0x1b400000 +#define QCA955X_EHCI_SIZE 0x1000 + /* * DDR_CTRL block */ @@ -199,6 +244,41 @@ #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) +#define QCA955X_PLL_CPU_CONFIG_REG 0x00 +#define QCA955X_PLL_DDR_CONFIG_REG 0x04 +#define QCA955X_PLL_CLK_CTRL_REG 0x08 + +#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 +#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f +#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6 +#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f +#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 +#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f +#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 +#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 + +#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 +#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff +#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10 +#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f +#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 +#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f +#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 +#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 + +#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) +#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) +#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) +#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 +#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f +#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 +#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f +#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 +#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f +#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) +#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) +#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) + /* * USB_CONFIG block */ @@ -238,6 +318,10 @@ #define AR934X_RESET_REG_BOOTSTRAP 0xb0 #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac +#define QCA955X_RESET_REG_RESET_MODULE 0x1c +#define QCA955X_RESET_REG_BOOTSTRAP 0xb0 +#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac + #define MISC_INT_ETHSW BIT(12) #define MISC_INT_TIMER4 BIT(10) #define MISC_INT_TIMER3 BIT(9) @@ -312,9 +396,11 @@ #define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5) #define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4) #define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2) -#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) +#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) #define AR934X_BOOTSTRAP_DDR1 BIT(0) +#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) + #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) @@ -333,6 +419,37 @@ AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ AR934X_PCIE_WMAC_INT_PCIE_RC3) +#define QCA955X_EXT_INT_WMAC_MISC BIT(0) +#define QCA955X_EXT_INT_WMAC_TX BIT(1) +#define QCA955X_EXT_INT_WMAC_RXLP BIT(2) +#define QCA955X_EXT_INT_WMAC_RXHP BIT(3) +#define QCA955X_EXT_INT_PCIE_RC1 BIT(4) +#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5) +#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6) +#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7) +#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8) +#define QCA955X_EXT_INT_PCIE_RC2 BIT(12) +#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13) +#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14) +#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15) +#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16) +#define QCA955X_EXT_INT_USB1 BIT(24) +#define QCA955X_EXT_INT_USB2 BIT(28) + +#define QCA955X_EXT_INT_WMAC_ALL \ + (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \ + QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP) + +#define QCA955X_EXT_INT_PCIE_RC1_ALL \ + (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \ + QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \ + QCA955X_EXT_INT_PCIE_RC1_INT3) + +#define QCA955X_EXT_INT_PCIE_RC2_ALL \ + (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \ + QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \ + QCA955X_EXT_INT_PCIE_RC2_INT3) + #define REV_ID_MAJOR_MASK 0xfff0 #define REV_ID_MAJOR_AR71XX 0x00a0 #define REV_ID_MAJOR_AR913X 0x00b0 @@ -344,6 +461,8 @@ #define REV_ID_MAJOR_AR9341 0x0120 #define REV_ID_MAJOR_AR9342 0x1120 #define REV_ID_MAJOR_AR9344 0x2120 +#define REV_ID_MAJOR_QCA9556 0x0130 +#define REV_ID_MAJOR_QCA9558 0x1130 #define AR71XX_REV_ID_MINOR_MASK 0x3 #define AR71XX_REV_ID_MINOR_AR7130 0x0 @@ -362,7 +481,9 @@ #define AR724X_REV_ID_REVISION_MASK 0x3 -#define AR934X_REV_ID_REVISION_MASK 0xf +#define AR934X_REV_ID_REVISION_MASK 0xf + +#define QCA955X_REV_ID_REVISION_MASK 0xf /* * SPI block @@ -401,12 +522,15 @@ #define AR71XX_GPIO_REG_INT_ENABLE 0x24 #define AR71XX_GPIO_REG_FUNC 0x28 +#define AR934X_GPIO_REG_FUNC 0x6c + #define AR71XX_GPIO_COUNT 16 #define AR7240_GPIO_COUNT 18 #define AR7241_GPIO_COUNT 20 #define AR913X_GPIO_COUNT 22 #define AR933X_GPIO_COUNT 30 #define AR934X_GPIO_COUNT 23 +#define QCA955X_GPIO_COUNT 24 /* * SRIF block diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart.h b/arch/mips/include/asm/mach-ath79/ar933x_uart.h index 5273055..c2917b3 100644 --- a/arch/mips/include/asm/mach-ath79/ar933x_uart.h +++ b/arch/mips/include/asm/mach-ath79/ar933x_uart.h @@ -26,14 +26,14 @@ #define AR933X_UART_CS_PARITY_S 0 #define AR933X_UART_CS_PARITY_M 0x3 -#define AR933X_UART_CS_PARITY_NONE 0 -#define AR933X_UART_CS_PARITY_ODD 1 -#define AR933X_UART_CS_PARITY_EVEN 2 +#define AR933X_UART_CS_PARITY_NONE 0 +#define AR933X_UART_CS_PARITY_ODD 1 +#define AR933X_UART_CS_PARITY_EVEN 2 #define AR933X_UART_CS_IF_MODE_S 2 #define AR933X_UART_CS_IF_MODE_M 0x3 -#define AR933X_UART_CS_IF_MODE_NONE 0 -#define AR933X_UART_CS_IF_MODE_DTE 1 -#define AR933X_UART_CS_IF_MODE_DCE 2 +#define AR933X_UART_CS_IF_MODE_NONE 0 +#define AR933X_UART_CS_IF_MODE_DTE 1 +#define AR933X_UART_CS_IF_MODE_DCE 2 #define AR933X_UART_CS_FLOW_CTRL_S 4 #define AR933X_UART_CS_FLOW_CTRL_M 0x3 #define AR933X_UART_CS_DMA_EN BIT(6) diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h index 4f248c3..1557934 100644 --- a/arch/mips/include/asm/mach-ath79/ath79.h +++ b/arch/mips/include/asm/mach-ath79/ath79.h @@ -32,6 +32,8 @@ enum ath79_soc_type { ATH79_SOC_AR9341, ATH79_SOC_AR9342, ATH79_SOC_AR9344, + ATH79_SOC_QCA9556, + ATH79_SOC_QCA9558, }; extern enum ath79_soc_type ath79_soc; @@ -98,6 +100,21 @@ static inline int soc_is_ar934x(void) return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344(); } +static inline int soc_is_qca9556(void) +{ + return ath79_soc == ATH79_SOC_QCA9556; +} + +static inline int soc_is_qca9558(void) +{ + return ath79_soc == ATH79_SOC_QCA9558; +} + +static inline int soc_is_qca955x(void) +{ + return soc_is_qca9556() || soc_is_qca9558(); +} + extern void __iomem *ath79_ddr_base; extern void __iomem *ath79_pll_base; extern void __iomem *ath79_reset_base; diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h index ea4b66d..ddb947e 100644 --- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h @@ -49,7 +49,7 @@ #define cpu_has_64bits 0 #define cpu_has_64bit_zero_reg 0 #define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 +#define cpu_has_64bit_addresses 0 #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 diff --git a/arch/mips/include/asm/mach-ath79/irq.h b/arch/mips/include/asm/mach-ath79/irq.h index 0968f69..5c9ca76 100644 --- a/arch/mips/include/asm/mach-ath79/irq.h +++ b/arch/mips/include/asm/mach-ath79/irq.h @@ -10,10 +10,13 @@ #define __ASM_MACH_ATH79_IRQ_H #define MIPS_CPU_IRQ_BASE 0 -#define NR_IRQS 48 +#define NR_IRQS 51 + +#define ATH79_CPU_IRQ(_x) (MIPS_CPU_IRQ_BASE + (_x)) #define ATH79_MISC_IRQ_BASE 8 #define ATH79_MISC_IRQ_COUNT 32 +#define ATH79_MISC_IRQ(_x) (ATH79_MISC_IRQ_BASE + (_x)) #define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT) #define ATH79_PCI_IRQ_COUNT 6 @@ -23,25 +26,9 @@ #define ATH79_IP2_IRQ_COUNT 2 #define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x)) -#define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2) -#define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3) -#define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4) -#define ATH79_CPU_IRQ_GE1 (MIPS_CPU_IRQ_BASE + 5) -#define ATH79_CPU_IRQ_MISC (MIPS_CPU_IRQ_BASE + 6) -#define ATH79_CPU_IRQ_TIMER (MIPS_CPU_IRQ_BASE + 7) - -#define ATH79_MISC_IRQ_TIMER (ATH79_MISC_IRQ_BASE + 0) -#define ATH79_MISC_IRQ_ERROR (ATH79_MISC_IRQ_BASE + 1) -#define ATH79_MISC_IRQ_GPIO (ATH79_MISC_IRQ_BASE + 2) -#define ATH79_MISC_IRQ_UART (ATH79_MISC_IRQ_BASE + 3) -#define ATH79_MISC_IRQ_WDOG (ATH79_MISC_IRQ_BASE + 4) -#define ATH79_MISC_IRQ_PERFC (ATH79_MISC_IRQ_BASE + 5) -#define ATH79_MISC_IRQ_OHCI (ATH79_MISC_IRQ_BASE + 6) -#define ATH79_MISC_IRQ_DMA (ATH79_MISC_IRQ_BASE + 7) -#define ATH79_MISC_IRQ_TIMER2 (ATH79_MISC_IRQ_BASE + 8) -#define ATH79_MISC_IRQ_TIMER3 (ATH79_MISC_IRQ_BASE + 9) -#define ATH79_MISC_IRQ_TIMER4 (ATH79_MISC_IRQ_BASE + 10) -#define ATH79_MISC_IRQ_ETHSW (ATH79_MISC_IRQ_BASE + 12) +#define ATH79_IP3_IRQ_BASE (ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT) +#define ATH79_IP3_IRQ_COUNT 3 +#define ATH79_IP3_IRQ(_x) (ATH79_IP3_IRQ_BASE + (_x)) #include_next <irq.h> diff --git a/arch/mips/include/asm/mach-ath79/pci.h b/arch/mips/include/asm/mach-ath79/pci.h deleted file mode 100644 index 7868f7f..0000000 --- a/arch/mips/include/asm/mach-ath79/pci.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Atheros AR71XX/AR724X PCI support - * - * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_ATH79_PCI_H -#define __ASM_MACH_ATH79_PCI_H - -#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX) -int ar71xx_pcibios_init(void); -#else -static inline int ar71xx_pcibios_init(void) { return 0; } -#endif - -#if defined(CONFIG_PCI_AR724X) -int ar724x_pcibios_init(int irq); -#else -static inline int ar724x_pcibios_init(int irq) { return 0; } -#endif - -#endif /* __ASM_MACH_ATH79_PCI_H */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 569828d..3e11a46 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -349,7 +349,7 @@ extern void au1300_vss_block_control(int block, int enable); #define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) #define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1) #define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) -#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST +#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST /* Au1300-style (GPIC): 1 controller with up to 128 sources */ #define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8) @@ -589,7 +589,7 @@ enum soc_au1550_ints { AU1550_GPIO14_INT, AU1550_GPIO15_INT, AU1550_GPIO200_INT, - AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */ + AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */ AU1550_GPIO16_INT, AU1550_GPIO17_INT, AU1550_GPIO20_INT, @@ -603,7 +603,7 @@ enum soc_au1550_ints { AU1550_GPIO28_INT, AU1550_GPIO206_INT, AU1550_GPIO207_INT, - AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */ + AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */ }; enum soc_au1200_ints { @@ -636,7 +636,7 @@ enum soc_au1200_ints { AU1200_GPIO205_INT, AU1200_GPIO206_INT, AU1200_GPIO207_INT, - AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */ + AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */ AU1200_USB_INT, AU1200_LCD_INT, AU1200_MAE_BOTH_INT, @@ -823,7 +823,7 @@ enum soc_au1200_ints { #define GPIC_GPIO_TO_BIT(gpio) \ (1 << ((gpio) & 0x1f)) -#define GPIC_GPIO_BANKOFF(gpio) \ +#define GPIC_GPIO_BANKOFF(gpio) \ (((gpio) >> 5) * 4) /* Pin Control bits: who owns the pin, what does it do */ @@ -958,32 +958,32 @@ enum soc_au1200_ints { #define MEM_STSTAT 0xB4001104 #define MEM_STNAND_CMD 0x0 -#define MEM_STNAND_ADDR 0x4 -#define MEM_STNAND_DATA 0x20 +#define MEM_STNAND_ADDR 0x4 +#define MEM_STNAND_DATA 0x20 /* Programmable Counters 0 and 1 */ #define SYS_BASE 0xB1900000 #define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) -# define SYS_CNTRL_E1S (1 << 23) -# define SYS_CNTRL_T1S (1 << 20) -# define SYS_CNTRL_M21 (1 << 19) -# define SYS_CNTRL_M11 (1 << 18) -# define SYS_CNTRL_M01 (1 << 17) -# define SYS_CNTRL_C1S (1 << 16) +# define SYS_CNTRL_E1S (1 << 23) +# define SYS_CNTRL_T1S (1 << 20) +# define SYS_CNTRL_M21 (1 << 19) +# define SYS_CNTRL_M11 (1 << 18) +# define SYS_CNTRL_M01 (1 << 17) +# define SYS_CNTRL_C1S (1 << 16) # define SYS_CNTRL_BP (1 << 14) -# define SYS_CNTRL_EN1 (1 << 13) -# define SYS_CNTRL_BT1 (1 << 12) -# define SYS_CNTRL_EN0 (1 << 11) -# define SYS_CNTRL_BT0 (1 << 10) +# define SYS_CNTRL_EN1 (1 << 13) +# define SYS_CNTRL_BT1 (1 << 12) +# define SYS_CNTRL_EN0 (1 << 11) +# define SYS_CNTRL_BT0 (1 << 10) # define SYS_CNTRL_E0 (1 << 8) -# define SYS_CNTRL_E0S (1 << 7) -# define SYS_CNTRL_32S (1 << 5) -# define SYS_CNTRL_T0S (1 << 4) -# define SYS_CNTRL_M20 (1 << 3) -# define SYS_CNTRL_M10 (1 << 2) -# define SYS_CNTRL_M00 (1 << 1) -# define SYS_CNTRL_C0S (1 << 0) +# define SYS_CNTRL_E0S (1 << 7) +# define SYS_CNTRL_32S (1 << 5) +# define SYS_CNTRL_T0S (1 << 4) +# define SYS_CNTRL_M20 (1 << 3) +# define SYS_CNTRL_M10 (1 << 2) +# define SYS_CNTRL_M00 (1 << 1) +# define SYS_CNTRL_C0S (1 << 0) /* Programmable Counter 0 Registers */ #define SYS_TOYTRIM (SYS_BASE + 0) @@ -1003,33 +1003,33 @@ enum soc_au1200_ints { /* I2S Controller */ #define I2S_DATA 0xB1000000 -# define I2S_DATA_MASK 0xffffff +# define I2S_DATA_MASK 0xffffff #define I2S_CONFIG 0xB1000004 -# define I2S_CONFIG_XU (1 << 25) -# define I2S_CONFIG_XO (1 << 24) -# define I2S_CONFIG_RU (1 << 23) -# define I2S_CONFIG_RO (1 << 22) -# define I2S_CONFIG_TR (1 << 21) -# define I2S_CONFIG_TE (1 << 20) -# define I2S_CONFIG_TF (1 << 19) -# define I2S_CONFIG_RR (1 << 18) -# define I2S_CONFIG_RE (1 << 17) -# define I2S_CONFIG_RF (1 << 16) -# define I2S_CONFIG_PD (1 << 11) -# define I2S_CONFIG_LB (1 << 10) -# define I2S_CONFIG_IC (1 << 9) +# define I2S_CONFIG_XU (1 << 25) +# define I2S_CONFIG_XO (1 << 24) +# define I2S_CONFIG_RU (1 << 23) +# define I2S_CONFIG_RO (1 << 22) +# define I2S_CONFIG_TR (1 << 21) +# define I2S_CONFIG_TE (1 << 20) +# define I2S_CONFIG_TF (1 << 19) +# define I2S_CONFIG_RR (1 << 18) +# define I2S_CONFIG_RE (1 << 17) +# define I2S_CONFIG_RF (1 << 16) +# define I2S_CONFIG_PD (1 << 11) +# define I2S_CONFIG_LB (1 << 10) +# define I2S_CONFIG_IC (1 << 9) # define I2S_CONFIG_FM_BIT 7 # define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_TN (1 << 6) -# define I2S_CONFIG_RN (1 << 5) +# define I2S_CONFIG_TN (1 << 6) +# define I2S_CONFIG_RN (1 << 5) # define I2S_CONFIG_SZ_BIT 0 # define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) #define I2S_CONTROL 0xB1000008 -# define I2S_CONTROL_D (1 << 1) +# define I2S_CONTROL_D (1 << 1) # define I2S_CONTROL_CE (1 << 0) @@ -1037,16 +1037,16 @@ enum soc_au1200_ints { /* 4 byte offsets from AU1000_ETH_BASE */ #define MAC_CONTROL 0x0 -# define MAC_RX_ENABLE (1 << 2) -# define MAC_TX_ENABLE (1 << 3) -# define MAC_DEF_CHECK (1 << 5) -# define MAC_SET_BL(X) (((X) & 0x3) << 6) +# define MAC_RX_ENABLE (1 << 2) +# define MAC_TX_ENABLE (1 << 3) +# define MAC_DEF_CHECK (1 << 5) +# define MAC_SET_BL(X) (((X) & 0x3) << 6) # define MAC_AUTO_PAD (1 << 8) # define MAC_DISABLE_RETRY (1 << 10) # define MAC_DISABLE_BCAST (1 << 11) # define MAC_LATE_COL (1 << 12) -# define MAC_HASH_MODE (1 << 13) -# define MAC_HASH_ONLY (1 << 15) +# define MAC_HASH_MODE (1 << 13) +# define MAC_HASH_ONLY (1 << 15) # define MAC_PASS_ALL (1 << 16) # define MAC_INVERSE_FILTER (1 << 17) # define MAC_PROMISCUOUS (1 << 18) @@ -1083,9 +1083,9 @@ enum soc_au1200_ints { # define MAC_EN_RESET0 (1 << 1) # define MAC_EN_TOSS (0 << 2) # define MAC_EN_CACHEABLE (1 << 3) -# define MAC_EN_RESET1 (1 << 4) -# define MAC_EN_RESET2 (1 << 5) -# define MAC_DMA_RESET (1 << 6) +# define MAC_EN_RESET1 (1 << 4) +# define MAC_EN_RESET2 (1 << 5) +# define MAC_DMA_RESET (1 << 6) /* Ethernet Controller DMA Channels */ @@ -1095,7 +1095,7 @@ enum soc_au1200_ints { #define MAC_TX_BUFF0_STATUS 0x0 # define TX_FRAME_ABORTED (1 << 0) # define TX_JAB_TIMEOUT (1 << 1) -# define TX_NO_CARRIER (1 << 2) +# define TX_NO_CARRIER (1 << 2) # define TX_LOSS_CARRIER (1 << 3) # define TX_EXC_DEF (1 << 4) # define TX_LATE_COLL_ABORT (1 << 5) @@ -1106,7 +1106,7 @@ enum soc_au1200_ints { # define TX_COLL_CNT_MASK (0xF << 10) # define TX_PKT_RETRY (1 << 31) #define MAC_TX_BUFF0_ADDR 0x4 -# define TX_DMA_ENABLE (1 << 0) +# define TX_DMA_ENABLE (1 << 0) # define TX_T_DONE (1 << 1) # define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) #define MAC_TX_BUFF0_LEN 0x8 @@ -1125,7 +1125,7 @@ enum soc_au1200_ints { /* offsets from MAC_RX_RING_ADDR */ #define MAC_RX_BUFF0_STATUS 0x0 # define RX_FRAME_LEN_MASK 0x3fff -# define RX_WDOG_TIMER (1 << 14) +# define RX_WDOG_TIMER (1 << 14) # define RX_RUNT (1 << 15) # define RX_OVERLEN (1 << 16) # define RX_COLL (1 << 17) @@ -1148,7 +1148,7 @@ enum soc_au1200_ints { RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) #define MAC_RX_BUFF0_ADDR 0x4 -# define RX_DMA_ENABLE (1 << 0) +# define RX_DMA_ENABLE (1 << 0) # define RX_T_DONE (1 << 1) # define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) # define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) @@ -1173,34 +1173,34 @@ enum soc_au1200_ints { /* SSIO */ #define SSI0_STATUS 0xB1600000 -# define SSI_STATUS_BF (1 << 4) -# define SSI_STATUS_OF (1 << 3) -# define SSI_STATUS_UF (1 << 2) +# define SSI_STATUS_BF (1 << 4) +# define SSI_STATUS_OF (1 << 3) +# define SSI_STATUS_UF (1 << 2) # define SSI_STATUS_D (1 << 1) # define SSI_STATUS_B (1 << 0) #define SSI0_INT 0xB1600004 # define SSI_INT_OI (1 << 3) # define SSI_INT_UI (1 << 2) # define SSI_INT_DI (1 << 1) -#define SSI0_INT_ENABLE 0xB1600008 +#define SSI0_INT_ENABLE 0xB1600008 # define SSI_INTE_OIE (1 << 3) # define SSI_INTE_UIE (1 << 2) # define SSI_INTE_DIE (1 << 1) #define SSI0_CONFIG 0xB1600020 -# define SSI_CONFIG_AO (1 << 24) -# define SSI_CONFIG_DO (1 << 23) +# define SSI_CONFIG_AO (1 << 24) +# define SSI_CONFIG_DO (1 << 23) # define SSI_CONFIG_ALEN_BIT 20 # define SSI_CONFIG_ALEN_MASK (0x7 << 20) # define SSI_CONFIG_DLEN_BIT 16 # define SSI_CONFIG_DLEN_MASK (0x7 << 16) -# define SSI_CONFIG_DD (1 << 11) -# define SSI_CONFIG_AD (1 << 10) +# define SSI_CONFIG_DD (1 << 11) +# define SSI_CONFIG_AD (1 << 10) # define SSI_CONFIG_BM_BIT 8 # define SSI_CONFIG_BM_MASK (0x3 << 8) -# define SSI_CONFIG_CE (1 << 7) -# define SSI_CONFIG_DP (1 << 6) -# define SSI_CONFIG_DL (1 << 5) -# define SSI_CONFIG_EP (1 << 4) +# define SSI_CONFIG_CE (1 << 7) +# define SSI_CONFIG_DP (1 << 6) +# define SSI_CONFIG_DL (1 << 5) +# define SSI_CONFIG_EP (1 << 4) #define SSI0_ADATA 0xB1600024 # define SSI_AD_D (1 << 24) # define SSI_AD_ADDR_BIT 16 @@ -1210,12 +1210,12 @@ enum soc_au1200_ints { #define SSI0_CLKDIV 0xB1600028 #define SSI0_CONTROL 0xB1600100 # define SSI_CONTROL_CD (1 << 1) -# define SSI_CONTROL_E (1 << 0) +# define SSI_CONTROL_E (1 << 0) /* SSI1 */ #define SSI1_STATUS 0xB1680000 #define SSI1_INT 0xB1680004 -#define SSI1_INT_ENABLE 0xB1680008 +#define SSI1_INT_ENABLE 0xB1680008 #define SSI1_CONFIG 0xB1680020 #define SSI1_ADATA 0xB1680024 #define SSI1_CLKDIV 0xB1680028 @@ -1242,8 +1242,8 @@ enum soc_au1200_ints { #define SSI_CONFIG_AO (1 << 24) #define SSI_CONFIG_DO (1 << 23) -#define SSI_CONFIG_ALEN (7 << 20) -#define SSI_CONFIG_DLEN (15 << 16) +#define SSI_CONFIG_ALEN (7 << 20) +#define SSI_CONFIG_DLEN (15 << 16) #define SSI_CONFIG_DD (1 << 11) #define SSI_CONFIG_AD (1 << 10) #define SSI_CONFIG_BM (3 << 8) @@ -1305,7 +1305,7 @@ struct au1k_irda_platform_data { # define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */ # define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */ -/* Au1550 only. Redefines lots of pins */ +/* Au1550 only. Redefines lots of pins */ # define SYS_PF_PSC2_MASK (7 << 17) # define SYS_PF_PSC2_AC97 0 # define SYS_PF_PSC2_SPI 0 @@ -1322,33 +1322,33 @@ struct au1k_irda_platform_data { # define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) /* Au1200 only */ -#define SYS_PINFUNC_DMA (1 << 31) -#define SYS_PINFUNC_S0A (1 << 30) -#define SYS_PINFUNC_S1A (1 << 29) -#define SYS_PINFUNC_LP0 (1 << 28) -#define SYS_PINFUNC_LP1 (1 << 27) -#define SYS_PINFUNC_LD16 (1 << 26) -#define SYS_PINFUNC_LD8 (1 << 25) -#define SYS_PINFUNC_LD1 (1 << 24) -#define SYS_PINFUNC_LD0 (1 << 23) -#define SYS_PINFUNC_P1A (3 << 21) -#define SYS_PINFUNC_P1B (1 << 20) -#define SYS_PINFUNC_FS3 (1 << 19) -#define SYS_PINFUNC_P0A (3 << 17) +#define SYS_PINFUNC_DMA (1 << 31) +#define SYS_PINFUNC_S0A (1 << 30) +#define SYS_PINFUNC_S1A (1 << 29) +#define SYS_PINFUNC_LP0 (1 << 28) +#define SYS_PINFUNC_LP1 (1 << 27) +#define SYS_PINFUNC_LD16 (1 << 26) +#define SYS_PINFUNC_LD8 (1 << 25) +#define SYS_PINFUNC_LD1 (1 << 24) +#define SYS_PINFUNC_LD0 (1 << 23) +#define SYS_PINFUNC_P1A (3 << 21) +#define SYS_PINFUNC_P1B (1 << 20) +#define SYS_PINFUNC_FS3 (1 << 19) +#define SYS_PINFUNC_P0A (3 << 17) #define SYS_PINFUNC_CS (1 << 16) -#define SYS_PINFUNC_CIM (1 << 15) -#define SYS_PINFUNC_P1C (1 << 14) -#define SYS_PINFUNC_U1T (1 << 12) -#define SYS_PINFUNC_U1R (1 << 11) -#define SYS_PINFUNC_EX1 (1 << 10) -#define SYS_PINFUNC_EX0 (1 << 9) -#define SYS_PINFUNC_U0R (1 << 8) +#define SYS_PINFUNC_CIM (1 << 15) +#define SYS_PINFUNC_P1C (1 << 14) +#define SYS_PINFUNC_U1T (1 << 12) +#define SYS_PINFUNC_U1R (1 << 11) +#define SYS_PINFUNC_EX1 (1 << 10) +#define SYS_PINFUNC_EX0 (1 << 9) +#define SYS_PINFUNC_U0R (1 << 8) #define SYS_PINFUNC_MC (1 << 7) -#define SYS_PINFUNC_S0B (1 << 6) -#define SYS_PINFUNC_S0C (1 << 5) -#define SYS_PINFUNC_P0B (1 << 4) -#define SYS_PINFUNC_U0T (1 << 3) -#define SYS_PINFUNC_S1B (1 << 2) +#define SYS_PINFUNC_S0B (1 << 6) +#define SYS_PINFUNC_S0C (1 << 5) +#define SYS_PINFUNC_P0B (1 << 4) +#define SYS_PINFUNC_U0T (1 << 3) +#define SYS_PINFUNC_S1B (1 << 2) /* Power Management */ #define SYS_SCRATCH0 0xB1900018 @@ -1405,7 +1405,7 @@ struct au1k_irda_platform_data { # define SYS_CS_DI2 (1 << 16) # define SYS_CS_CI2 (1 << 15) -# define SYS_CS_ML_BIT 7 +# define SYS_CS_ML_BIT 7 # define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT) # define SYS_CS_DL (1 << 6) # define SYS_CS_CL (1 << 5) @@ -1554,8 +1554,8 @@ struct au1k_irda_platform_data { #define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16) #define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff) #define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16) -#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8) -#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff) +#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8) +#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff) #define PCI_ID_DID(x) (((x) & 0xffff) << 16) #define PCI_ID_VID(x) ((x) & 0xffff) #define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16) diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h index ba4cf0e..7cedca5 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h +++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h @@ -34,7 +34,7 @@ #include <linux/spinlock.h> /* And spinlocks */ #include <linux/delay.h> -#define NUM_AU1000_DMA_CHANNELS 8 +#define NUM_AU1000_DMA_CHANNELS 8 /* DMA Channel Register Offsets */ #define DMA_MODE_SET 0x00000000 @@ -47,7 +47,7 @@ #define DMA_DS (1 << 15) #define DMA_BE (1 << 13) #define DMA_DR (1 << 12) -#define DMA_TS8 (1 << 11) +#define DMA_TS8 (1 << 11) #define DMA_DW_BIT 9 #define DMA_DW_MASK (0x03 << DMA_DW_BIT) #define DMA_DW8 (0 << DMA_DW_BIT) @@ -59,9 +59,9 @@ #define DMA_GO (1 << 5) #define DMA_AB (1 << 4) #define DMA_D1 (1 << 3) -#define DMA_BE1 (1 << 2) +#define DMA_BE1 (1 << 2) #define DMA_D0 (1 << 1) -#define DMA_BE0 (1 << 0) +#define DMA_BE0 (1 << 0) #define DMA_PERIPHERAL_ADDR 0x00000008 #define DMA_BUFFER0_START 0x0000000C @@ -246,7 +246,7 @@ static inline void init_dma(unsigned int dmanr) mode |= DMA_IE; au_writel(~mode, chan->io + DMA_MODE_CLEAR); - au_writel(mode, chan->io + DMA_MODE_SET); + au_writel(mode, chan->io + DMA_MODE_SET); } /* diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h index e221659..cadab91 100644 --- a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h +++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h @@ -148,7 +148,7 @@ struct au1xmmc_platform_data { /* * SD_STATUS bit definitions. */ -#define SD_STATUS_DCRCW (0x00000007) +#define SD_STATUS_DCRCW (0x00000007) #define SD_STATUS_xx1 (0x00000008) #define SD_STATUS_CB (0x00000010) #define SD_STATUS_DB (0x00000020) diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index 217810e..ca8077a 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -103,7 +103,7 @@ typedef volatile struct au1xxx_ddma_desc { * Lets have some SW data following -- make sure it's 32 bytes. */ u32 sw_status; - u32 sw_context; + u32 sw_context; u32 sw_reserved[6]; } au1x_ddma_desc_t; @@ -123,7 +123,7 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ #define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ -#define SW_STATUS_INUSE (1 << 0) +#define SW_STATUS_INUSE (1 << 0) /* Command 0 device IDs. */ #define AU1550_DSCR_CMD0_UART0_TX 0 @@ -195,8 +195,8 @@ typedef volatile struct au1xxx_ddma_desc { #define AU1300_DSCR_CMD0_SDMS_RX0 9 #define AU1300_DSCR_CMD0_SDMS_TX1 10 #define AU1300_DSCR_CMD0_SDMS_RX1 11 -#define AU1300_DSCR_CMD0_AES_TX 12 -#define AU1300_DSCR_CMD0_AES_RX 13 +#define AU1300_DSCR_CMD0_AES_TX 12 +#define AU1300_DSCR_CMD0_AES_RX 13 #define AU1300_DSCR_CMD0_PSC0_TX 14 #define AU1300_DSCR_CMD0_PSC0_RX 15 #define AU1300_DSCR_CMD0_PSC1_TX 16 @@ -205,12 +205,12 @@ typedef volatile struct au1xxx_ddma_desc { #define AU1300_DSCR_CMD0_PSC2_RX 19 #define AU1300_DSCR_CMD0_PSC3_TX 20 #define AU1300_DSCR_CMD0_PSC3_RX 21 -#define AU1300_DSCR_CMD0_LCD 22 +#define AU1300_DSCR_CMD0_LCD 22 #define AU1300_DSCR_CMD0_NAND_FLASH 23 #define AU1300_DSCR_CMD0_SDMS_TX2 24 #define AU1300_DSCR_CMD0_SDMS_RX2 25 #define AU1300_DSCR_CMD0_CIM_SYNC 26 -#define AU1300_DSCR_CMD0_UDMA 27 +#define AU1300_DSCR_CMD0_UDMA 27 #define AU1300_DSCR_CMD0_DMA_REQ0 28 #define AU1300_DSCR_CMD0_DMA_REQ1 29 @@ -298,7 +298,7 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_NXTPTR_MS (1 << 27) /* The number of DBDMA channels. */ -#define NUM_DBDMA_CHANS 16 +#define NUM_DBDMA_CHANS 16 /* * DDMA API definitions @@ -316,7 +316,7 @@ typedef struct dbdma_device_table { typedef struct dbdma_chan_config { - spinlock_t lock; + spinlock_t lock; u32 chan_flags; u32 chan_index; diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h index e306384..bb91b89 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h @@ -1,5 +1,5 @@ /* - * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005 + * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005 * * BRIEF MODULE DESCRIPTION * AMD Alchemy Au1xxx IDE interface routines over the Static Bus @@ -27,14 +27,14 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. * * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE - * Interface and Linux Device Driver" Application Note. + * Interface and Linux Device Driver" Application Note. */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA #define DMA_WAIT_TIMEOUT 100 -#define NUM_DESCRIPTORS PRD_ENTRIES +#define NUM_DESCRIPTORS PRD_ENTRIES #else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ -#define NUM_DESCRIPTORS 2 +#define NUM_DESCRIPTORS 2 #endif #ifndef AU1XXX_ATA_RQSIZE @@ -84,8 +84,8 @@ typedef struct { #define TWP_MASK (0x3F << 14) #define TCSW_MASK (0x0F << 10) #define TPM_MASK (0x0F << 6) -#define TA_MASK (0x3F << 0) -#define TS_MASK (1 << 8) +#define TA_MASK (0x3F << 0) +#define TS_MASK (1 << 8) /* Timing parameters PIO mode 0 */ #define SBC_IDE_PIO0_TCSOE (0x04 << 29) @@ -96,7 +96,7 @@ typedef struct { #define SBC_IDE_PIO0_TWP (0x10 << 14) #define SBC_IDE_PIO0_TCSW (0x04 << 10) #define SBC_IDE_PIO0_TPM (0x00 << 6) -#define SBC_IDE_PIO0_TA (0x15 << 0) +#define SBC_IDE_PIO0_TA (0x15 << 0) /* Timing parameters PIO mode 1 */ #define SBC_IDE_PIO1_TCSOE (0x03 << 29) #define SBC_IDE_PIO1_TOECS (0x01 << 26) @@ -106,7 +106,7 @@ typedef struct { #define SBC_IDE_PIO1_TWP (0x08 << 14) #define SBC_IDE_PIO1_TCSW (0x03 << 10) #define SBC_IDE_PIO1_TPM (0x00 << 6) -#define SBC_IDE_PIO1_TA (0x0B << 0) +#define SBC_IDE_PIO1_TA (0x0B << 0) /* Timing parameters PIO mode 2 */ #define SBC_IDE_PIO2_TCSOE (0x05 << 29) #define SBC_IDE_PIO2_TOECS (0x01 << 26) @@ -116,7 +116,7 @@ typedef struct { #define SBC_IDE_PIO2_TWP (0x1F << 14) #define SBC_IDE_PIO2_TCSW (0x05 << 10) #define SBC_IDE_PIO2_TPM (0x00 << 6) -#define SBC_IDE_PIO2_TA (0x22 << 0) +#define SBC_IDE_PIO2_TA (0x22 << 0) /* Timing parameters PIO mode 3 */ #define SBC_IDE_PIO3_TCSOE (0x05 << 29) #define SBC_IDE_PIO3_TOECS (0x01 << 26) @@ -126,7 +126,7 @@ typedef struct { #define SBC_IDE_PIO3_TWP (0x15 << 14) #define SBC_IDE_PIO3_TCSW (0x05 << 10) #define SBC_IDE_PIO3_TPM (0x00 << 6) -#define SBC_IDE_PIO3_TA (0x1A << 0) +#define SBC_IDE_PIO3_TA (0x1A << 0) /* Timing parameters PIO mode 4 */ #define SBC_IDE_PIO4_TCSOE (0x04 << 29) #define SBC_IDE_PIO4_TOECS (0x01 << 26) @@ -136,7 +136,7 @@ typedef struct { #define SBC_IDE_PIO4_TWP (0x0D << 14) #define SBC_IDE_PIO4_TCSW (0x03 << 10) #define SBC_IDE_PIO4_TPM (0x00 << 6) -#define SBC_IDE_PIO4_TA (0x12 << 0) +#define SBC_IDE_PIO4_TA (0x12 << 0) /* Timing parameters MDMA mode 0 */ #define SBC_IDE_MDMA0_TCSOE (0x03 << 29) #define SBC_IDE_MDMA0_TOECS (0x01 << 26) diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h index 4e3f3bc..8a9cd75 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h @@ -53,7 +53,7 @@ #define PSC_CTRL_DISABLE 0 #define PSC_CTRL_SUSPEND 2 -#define PSC_CTRL_ENABLE 3 +#define PSC_CTRL_ENABLE 3 /* AC97 Registers. */ #define PSC_AC97CFG_OFFSET 0x00000008 @@ -85,8 +85,8 @@ #define PSC_AC97CFG_SE_ENABLE (1 << 25) #define PSC_AC97CFG_LEN_MASK (0xf << 21) -#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11) -#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1) +#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11) +#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1) #define PSC_AC97CFG_GE_ENABLE (1) /* Enable slots 3-12. */ @@ -95,7 +95,7 @@ /* * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately. - * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the + * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the * arithmetic in the macro. */ #define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21) diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index 73853b5a..796afd0 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -12,14 +12,14 @@ #include <asm/mach-au1x00/au1000.h> /* The default GPIO numberspace as documented in the Alchemy manuals. - * GPIO0-31 from GPIO1 block, GPIO200-215 from GPIO2 block. + * GPIO0-31 from GPIO1 block, GPIO200-215 from GPIO2 block. */ #define ALCHEMY_GPIO1_BASE 0 #define ALCHEMY_GPIO2_BASE 200 #define ALCHEMY_GPIO1_NUM 32 #define ALCHEMY_GPIO2_NUM 16 -#define ALCHEMY_GPIO1_MAX (ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1) +#define ALCHEMY_GPIO1_MAX (ALCHEMY_GPIO1_BASE + ALCHEMY_GPIO1_NUM - 1) #define ALCHEMY_GPIO2_MAX (ALCHEMY_GPIO2_BASE + ALCHEMY_GPIO2_NUM - 1) #define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off)) @@ -67,7 +67,7 @@ static inline int au1500_gpio1_to_irq(int gpio) switch (gpio) { case 0 ... 15: case 20: - case 23 ... 28: return MAKE_IRQ(1, gpio); + case 23 ... 28: return MAKE_IRQ(1, gpio); } return -ENXIO; @@ -139,8 +139,8 @@ static inline int au1550_gpio1_to_irq(int gpio) switch (gpio) { case 0 ... 15: - case 20 ... 28: return MAKE_IRQ(1, gpio); - case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16); + case 20 ... 28: return MAKE_IRQ(1, gpio); + case 16 ... 17: return MAKE_IRQ(1, 18 + gpio - 16); } return -ENXIO; @@ -152,9 +152,9 @@ static inline int au1550_gpio2_to_irq(int gpio) switch (gpio) { case 0: return MAKE_IRQ(1, 16); - case 1 ... 5: return MAKE_IRQ(1, 17); /* shared GPIO201_205 */ + case 1 ... 5: return MAKE_IRQ(1, 17); /* shared GPIO201_205 */ case 6 ... 7: return MAKE_IRQ(1, 29 + gpio - 6); - case 8 ... 15: return MAKE_IRQ(1, 31); /* shared GPIO208_215 */ + case 8 ... 15: return MAKE_IRQ(1, 31); /* shared GPIO208_215 */ } return -ENXIO; @@ -190,7 +190,7 @@ static inline int au1200_gpio2_to_irq(int gpio) case 0 ... 2: return MAKE_IRQ(0, 5 + gpio - 0); case 3: return MAKE_IRQ(0, 22); case 4 ... 7: return MAKE_IRQ(0, 24 + gpio - 4); - case 8 ... 15: return MAKE_IRQ(0, 28); /* shared GPIO208_215 */ + case 8 ... 15: return MAKE_IRQ(0, 28); /* shared GPIO208_215 */ } return -ENXIO; @@ -428,7 +428,7 @@ static inline void alchemy_gpio2_disable_int(int gpio2) /** * alchemy_gpio2_enable - Activate GPIO2 block. * - * The GPIO2 block must be enabled excplicitly to work. On systems + * The GPIO2 block must be enabled excplicitly to work. On systems * where this isn't done by the bootloader, this macro can be used. */ static inline void alchemy_gpio2_enable(void) @@ -533,7 +533,7 @@ static inline int alchemy_irq_to_gpio(int irq) * 2 (1 for Au1000) gpio_chips are registered. * *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: - * the boards' gpio.h must provide the linux gpio wrapper functions, + * the boards' gpio.h must provide the linux gpio wrapper functions, * *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: * inlinable gpio functions are provided which enable access to the diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h index fb9975c..ce02894 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h @@ -130,7 +130,7 @@ static inline int au1300_gpio_getinitlvl(unsigned int gpio) * A gpiochip for the 75 GPIOs is registered. * *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: -* the boards' gpio.h must provide the linux gpio wrapper functions, +* the boards' gpio.h must provide the linux gpio wrapper functions, * *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: * inlinable gpio functions are provided which enable access to the diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h index 69ef3ef..b8e7be8 100644 --- a/arch/mips/include/asm/mach-bcm47xx/nvram.h +++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h @@ -8,8 +8,8 @@ * option) any later version. */ -#ifndef __NVRAM_H -#define __NVRAM_H +#ifndef __BCM47XX_NVRAM_H +#define __BCM47XX_NVRAM_H #include <linux/types.h> #include <linux/kernel.h> @@ -32,12 +32,9 @@ struct nvram_header { #define NVRAM_MAX_VALUE_LEN 255 #define NVRAM_MAX_PARAM_LEN 64 -#define NVRAM_ERR_INV_PARAM -8 -#define NVRAM_ERR_ENVNOTFOUND -9 +extern int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len); -extern int nvram_getenv(char *name, char *val, size_t val_len); - -static inline void nvram_parse_macaddr(char *buf, u8 macaddr[6]) +static inline void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6]) { if (strchr(buf, ':')) sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], @@ -51,4 +48,4 @@ static inline void nvram_parse_macaddr(char *buf, u8 macaddr[6]) printk(KERN_WARNING "Can not parse mac address: %s\n", buf); } -#endif +#endif /* __BCM47XX_NVRAM_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h index dbd5b5a..cb922b9 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h @@ -182,7 +182,7 @@ enum bcm63xx_regs_set { #define BCM_6328_PERF_BASE (0xb0000000) #define BCM_6328_TIMER_BASE (0xb0000040) #define BCM_6328_WDT_BASE (0xb000005c) -#define BCM_6328_UART0_BASE (0xb0000100) +#define BCM_6328_UART0_BASE (0xb0000100) #define BCM_6328_UART1_BASE (0xb0000120) #define BCM_6328_GPIO_BASE (0xb0000080) #define BCM_6328_SPI_BASE (0xdeadbeef) diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h index 03a54df..7033144 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h @@ -88,7 +88,7 @@ #define bcm_mpi_readl(o) bcm_rset_readl(RSET_MPI, (o)) #define bcm_mpi_writel(v, o) bcm_rset_writel(RSET_MPI, (v), (o)) #define bcm_pcmcia_readl(o) bcm_rset_readl(RSET_PCMCIA, (o)) -#define bcm_pcmcia_writel(v, o) bcm_rset_writel(RSET_PCMCIA, (v), (o)) +#define bcm_pcmcia_writel(v, o) bcm_rset_writel(RSET_PCMCIA, (v), (o)) #define bcm_pcie_readl(o) bcm_rset_readl(RSET_PCIE, (o)) #define bcm_pcie_writel(v, o) bcm_rset_writel(RSET_PCIE, (v), (o)) #define bcm_sdram_readl(o) bcm_rset_readl(RSET_SDRAM, (o)) diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_iudma.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_iudma.h index a5bbff3..1e89df7 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_iudma.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_iudma.h @@ -19,7 +19,7 @@ struct bcm_enet_desc { #define DMADESC_SOP_MASK (1 << 13) #define DMADESC_ESOP_MASK (DMADESC_EOP_MASK | DMADESC_SOP_MASK) #define DMADESC_WRAP_MASK (1 << 12) -#define DMADESC_USB_NOZERO_MASK (1 << 1) +#define DMADESC_USB_NOZERO_MASK (1 << 1) #define DMADESC_USB_ZERO_MASK (1 << 0) /* status */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index c3eeb90..81b4702 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -143,7 +143,7 @@ CKCTL_6368_NAND_EN | \ CKCTL_6368_IPSEC_EN) -/* System PLL Control register */ +/* System PLL Control register */ #define PERF_SYS_PLL_CTL_REG 0x8 #define SYS_PLL_SOFT_RESET 0x1 @@ -219,7 +219,7 @@ #define SOFTRESET_6338_DMAMEM_MASK (1 << 6) #define SOFTRESET_6338_SAR_MASK (1 << 7) #define SOFTRESET_6338_ACLC_MASK (1 << 8) -#define SOFTRESET_6338_ADSLMIPSPLL_MASK (1 << 10) +#define SOFTRESET_6338_ADSLMIPSPLL_MASK (1 << 10) #define SOFTRESET_6338_ALL (SOFTRESET_6338_SPI_MASK | \ SOFTRESET_6338_ENET_MASK | \ SOFTRESET_6338_USBH_MASK | \ @@ -238,7 +238,7 @@ #define SOFTRESET_6348_DMAMEM_MASK (1 << 6) #define SOFTRESET_6348_SAR_MASK (1 << 7) #define SOFTRESET_6348_ACLC_MASK (1 << 8) -#define SOFTRESET_6348_ADSLMIPSPLL_MASK (1 << 10) +#define SOFTRESET_6348_ADSLMIPSPLL_MASK (1 << 10) #define SOFTRESET_6348_ALL (SOFTRESET_6348_SPI_MASK | \ SOFTRESET_6348_ENET_MASK | \ @@ -560,7 +560,7 @@ #define GPIO_PINMUX_OTHR_REG 0x24 -#define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12 +#define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12 #define GPIO_PINMUX_OTHR_6328_USB_MASK (3 << GPIO_PINMUX_OTHR_6328_USB_SHIFT) #define GPIO_PINMUX_OTHR_6328_USB_HOST (1 << GPIO_PINMUX_OTHR_6328_USB_SHIFT) #define GPIO_PINMUX_OTHR_6328_USB_DEV (2 << GPIO_PINMUX_OTHR_6328_USB_SHIFT) @@ -572,12 +572,12 @@ /* those bits must be kept as read in gpio basemode register*/ #define GPIO_STRAPBUS_REG 0x40 -#define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1) +#define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1) #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1) #define STRAPBUS_6368_BOOT_SEL_MASK 0x3 #define STRAPBUS_6368_BOOT_SEL_NAND 0 #define STRAPBUS_6368_BOOT_SEL_SERIAL 1 -#define STRAPBUS_6368_BOOT_SEL_PARALLEL 3 +#define STRAPBUS_6368_BOOT_SEL_PARALLEL 3 /************************************************************************* @@ -812,7 +812,7 @@ #define USBH_PRIV_SWAP_OHCI_DATA_MASK (1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT) #define USBH_PRIV_UTMI_CTL_6368_REG 0x10 -#define USBH_PRIV_UTMI_CTL_NODRIV_SHIFT 12 +#define USBH_PRIV_UTMI_CTL_NODRIV_SHIFT 12 #define USBH_PRIV_UTMI_CTL_NODRIV_MASK (0xf << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT) #define USBH_PRIV_UTMI_CTL_HOSTB_SHIFT 0 #define USBH_PRIV_UTMI_CTL_HOSTB_MASK (0xf << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT) @@ -841,7 +841,7 @@ #define USBD_CONTROL_INIT_SEL_MASK (0xf << USBD_CONTROL_INIT_SEL_SHIFT) #define USBD_CONTROL_FIFO_RESET_SHIFT 6 #define USBD_CONTROL_FIFO_RESET_MASK (3 << USBD_CONTROL_FIFO_RESET_SHIFT) -#define USBD_CONTROL_SETUPERRLOCK_SHIFT 5 +#define USBD_CONTROL_SETUPERRLOCK_SHIFT 5 #define USBD_CONTROL_SETUPERRLOCK_MASK (1 << USBD_CONTROL_SETUPERRLOCK_SHIFT) #define USBD_CONTROL_DONE_CSRS_SHIFT 0 #define USBD_CONTROL_DONE_CSRS_MASK (1 << USBD_CONTROL_DONE_CSRS_SHIFT) @@ -852,7 +852,7 @@ #define USBD_STRAPS_APP_SELF_PWR_MASK (1 << USBD_STRAPS_APP_SELF_PWR_SHIFT) #define USBD_STRAPS_APP_DISCON_SHIFT 9 #define USBD_STRAPS_APP_DISCON_MASK (1 << USBD_STRAPS_APP_DISCON_SHIFT) -#define USBD_STRAPS_APP_CSRPRGSUP_SHIFT 8 +#define USBD_STRAPS_APP_CSRPRGSUP_SHIFT 8 #define USBD_STRAPS_APP_CSRPRGSUP_MASK (1 << USBD_STRAPS_APP_CSRPRGSUP_SHIFT) #define USBD_STRAPS_APP_RMTWKUP_SHIFT 6 #define USBD_STRAPS_APP_RMTWKUP_MASK (1 << USBD_STRAPS_APP_RMTWKUP_SHIFT) @@ -943,7 +943,7 @@ #define USBD_EPNUM_TYPEMAP_REG 0x50 #define USBD_EPNUM_TYPEMAP_TYPE_SHIFT 8 #define USBD_EPNUM_TYPEMAP_TYPE_MASK (0x3 << USBD_EPNUM_TYPEMAP_TYPE_SHIFT) -#define USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT 0 +#define USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT 0 #define USBD_EPNUM_TYPEMAP_DMA_CH_MASK (0xf << USBD_EPNUM_TYPEMAP_DMACH_SHIFT) /* Misc per-endpoint settings */ @@ -1048,8 +1048,8 @@ #define MPI_L2PREMAP_IS_CARDBUS_MASK (1 << 2) #define MPI_PCIMODESEL_REG 0x144 -#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK (1 << 0) -#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK (1 << 1) +#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK (1 << 0) +#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK (1 << 1) #define MPI_PCIMODESEL_EXT_ARB_MASK (1 << 2) #define MPI_PCIMODESEL_PREFETCH_SHIFT 4 #define MPI_PCIMODESEL_PREFETCH_MASK (0xf << MPI_PCIMODESEL_PREFETCH_SHIFT) diff --git a/arch/mips/include/asm/mach-bcm63xx/irq.h b/arch/mips/include/asm/mach-bcm63xx/irq.h index 9332e78..2bbfc8d 100644 --- a/arch/mips/include/asm/mach-bcm63xx/irq.h +++ b/arch/mips/include/asm/mach-bcm63xx/irq.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_BCM63XX_IRQ_H #define __ASM_MACH_BCM63XX_IRQ_H -#define NR_IRQS 128 +#define NR_IRQS 128 #define MIPS_CPU_IRQ_BASE 0 #endif diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h index 502bb18..60fc4c3 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/irq.h +++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h @@ -51,8 +51,8 @@ enum octeon_irq { /* 256 - 511 represent the MSI interrupts 0-255 */ #define OCTEON_IRQ_MSI_BIT0 (256) -#define OCTEON_IRQ_MSI_LAST (OCTEON_IRQ_MSI_BIT0 + 255) -#define OCTEON_IRQ_LAST (OCTEON_IRQ_MSI_LAST + 1) +#define OCTEON_IRQ_MSI_LAST (OCTEON_IRQ_MSI_BIT0 + 255) +#define OCTEON_IRQ_LAST (OCTEON_IRQ_MSI_LAST + 1) #endif #endif diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h index dedef7d..1e7dbb1 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h +++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h @@ -16,7 +16,7 @@ #define CP0_PRID_OCTEON_PASS1 0x000d0000 #define CP0_PRID_OCTEON_CN30XX 0x000d0200 -.macro kernel_entry_setup +.macro kernel_entry_setup # Registers set by bootloader: # (only 32 bits set by bootloader, all addresses are physical # addresses, and need to have the appropriate memory region set @@ -28,12 +28,12 @@ .set push .set arch=octeon # Read the cavium mem control register - dmfc0 v0, CP0_CVMMEMCTL_REG + dmfc0 v0, CP0_CVMMEMCTL_REG # Clear the lower 6 bits, the CVMSEG size - dins v0, $0, 0, 6 - ori v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE - dmtc0 v0, CP0_CVMMEMCTL_REG # Write the cavium mem control register - dmfc0 v0, CP0_CVMCTL_REG # Read the cavium control register + dins v0, $0, 0, 6 + ori v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE + dmtc0 v0, CP0_CVMMEMCTL_REG # Write the cavium mem control register + dmfc0 v0, CP0_CVMCTL_REG # Read the cavium control register #ifdef CONFIG_CAVIUM_OCTEON_HW_FIX_UNALIGNED # Disable unaligned load/store support but leave HW fixup enabled or v0, v0, 0x5001 @@ -69,14 +69,14 @@ skip: and v0, v0, v1 ori v0, v0, (6 << 7) # Write the cavium control register - dmtc0 v0, CP0_CVMCTL_REG + dmtc0 v0, CP0_CVMCTL_REG sync # Flush dcache after config change - cache 9, 0($0) + cache 9, 0($0) # Get my core id - rdhwr v0, $0 + rdhwr v0, $0 # Jump the master to kernel_entry - bne a2, zero, octeon_main_processor + bne a2, zero, octeon_main_processor nop #ifdef CONFIG_SMP @@ -87,21 +87,21 @@ skip: # # This is the variable where the next core to boot os stored - PTR_LA t0, octeon_processor_boot + PTR_LA t0, octeon_processor_boot octeon_spin_wait_boot: # Get the core id of the next to be booted - LONG_L t1, (t0) + LONG_L t1, (t0) # Keep looping if it isn't me bne t1, v0, octeon_spin_wait_boot nop # Get my GP from the global variable - PTR_LA t0, octeon_processor_gp - LONG_L gp, (t0) + PTR_LA t0, octeon_processor_gp + LONG_L gp, (t0) # Get my SP from the global variable - PTR_LA t0, octeon_processor_sp - LONG_L sp, (t0) + PTR_LA t0, octeon_processor_sp + LONG_L sp, (t0) # Set the SP global variable to zero so the master knows we've started - LONG_S zero, (t0) + LONG_S zero, (t0) #ifdef __OCTEON__ syncw syncw @@ -130,7 +130,7 @@ octeon_main_processor: /* * Do SMP slave processor setup necessary before we can savely execute C code. */ - .macro smp_slave_setup + .macro smp_slave_setup .endm #endif /* __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H */ diff --git a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h index babc837..71d4bfa 100644 --- a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h @@ -32,9 +32,9 @@ #define cpu_scache_line_size() 0 #ifdef CONFIG_64BIT -#define cpu_has_llsc 0 +#define cpu_has_llsc 0 #else -#define cpu_has_llsc 1 +#define cpu_has_llsc 1 #endif #define cpu_has_mips16 0 diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h index f8afec3..6fe475b 100644 --- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h +++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2006 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/include/asm/mach-db1x00/bcsr.h b/arch/mips/include/asm/mach-db1x00/bcsr.h index 16f1cf5..3c3ed4a 100644 --- a/arch/mips/include/asm/mach-db1x00/bcsr.h +++ b/arch/mips/include/asm/mach-db1x00/bcsr.h @@ -110,7 +110,7 @@ enum bcsr_whoami_boards { BCSR_WHOAMI_DB1300, }; -/* STATUS reg. Unless otherwise noted, they're valid on all boards. +/* STATUS reg. Unless otherwise noted, they're valid on all boards. * PB1200 = DB1200. */ #define BCSR_STATUS_PC0VS 0x0003 @@ -190,7 +190,7 @@ enum bcsr_whoami_boards { #define BCSR_RESETS_OTPWRPROT 0x1000 /* DB1300 */ #define BCSR_RESETS_OTPCSB 0x2000 /* DB1300 */ #define BCSR_RESETS_OTGPWR 0x4000 /* DB1300 */ -#define BCSR_RESETS_USBHPWR 0x8000 /* DB1300 */ +#define BCSR_RESETS_USBHPWR 0x8000 /* DB1300 */ #define BCSR_BOARD_LCDVEE 0x0001 #define BCSR_BOARD_LCDVDD 0x0002 diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h index b2a8319..d3cce73 100644 --- a/arch/mips/include/asm/mach-db1x00/db1200.h +++ b/arch/mips/include/asm/mach-db1x00/db1200.h @@ -63,7 +63,7 @@ * the interrupt define and subtracting the DB1200_INT_BEGIN value. * * Example: IDE bis pos is = 64 - 64 - * ETH bit pos is = 65 - 64 + * ETH bit pos is = 65 - 64 */ enum external_db1200_ints { DB1200_INT_BEGIN = AU1000_MAX_INTR + 1, diff --git a/arch/mips/include/asm/mach-db1x00/db1300.h b/arch/mips/include/asm/mach-db1x00/db1300.h index 7fe5fb3..3d1ede4 100644 --- a/arch/mips/include/asm/mach-db1x00/db1300.h +++ b/arch/mips/include/asm/mach-db1x00/db1300.h @@ -21,7 +21,7 @@ #define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12) #define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13) #define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14) -#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15) +#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15) #define DB1300_LAST_INT (DB1300_FIRST_INT + 15) /* SMSC9210 CS */ diff --git a/arch/mips/include/asm/mach-emma2rh/irq.h b/arch/mips/include/asm/mach-emma2rh/irq.h index 5439eb8..2f7155d 100644 --- a/arch/mips/include/asm/mach-emma2rh/irq.h +++ b/arch/mips/include/asm/mach-emma2rh/irq.h @@ -8,7 +8,7 @@ #ifndef __ASM_MACH_EMMA2RH_IRQ_H #define __ASM_MACH_EMMA2RH_IRQ_H -#define NR_IRQS 256 +#define NR_IRQS 256 #include_next <irq.h> diff --git a/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h index 7c185bb..42be9e9 100644 --- a/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h @@ -8,6 +8,6 @@ #ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H #define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H -/* Intentionally empty file ... */ +/* Intentionally empty file ... */ #endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h index a38f4d4..5b5cd68 100644 --- a/arch/mips/include/asm/mach-generic/floppy.h +++ b/arch/mips/include/asm/mach-generic/floppy.h @@ -98,7 +98,7 @@ static inline void fd_disable_irq(void) static inline int fd_request_irq(void) { return request_irq(FLOPPY_IRQ, floppy_interrupt, - 0, "floppy", NULL); + 0, "floppy", NULL); } static inline void fd_free_irq(void) @@ -106,7 +106,7 @@ static inline void fd_free_irq(void) free_irq(FLOPPY_IRQ, NULL); } -#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); +#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); static inline unsigned long fd_getfdaddr1(void) diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h index 9c93a5b..affa66f 100644 --- a/arch/mips/include/asm/mach-generic/ide.h +++ b/arch/mips/include/asm/mach-generic/ide.h @@ -51,7 +51,7 @@ static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long si /* * insw() and gang might be called with interrupts disabled, so we can't * send IPIs for flushing due to the potencial of deadlocks, see the comment - * above smp_call_function() in arch/mips/kernel/smp.c. We work around the + * above smp_call_function() in arch/mips/kernel/smp.c. We work around the * problem by disabling preemption so we know we actually perform the flush * on the processor that actually has the lines to be flushed which hopefully * is even better for performance anyway. @@ -123,7 +123,7 @@ static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count) __ide_flush_epilogue(); } -/* ide_insw calls insw, not __ide_insw. Why? */ +/* ide_insw calls insw, not __ide_insw. Why? */ #undef insw #undef insl #undef outsw diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h index e014264..139cd20 100644 --- a/arch/mips/include/asm/mach-generic/irq.h +++ b/arch/mips/include/asm/mach-generic/irq.h @@ -9,12 +9,12 @@ #define __ASM_MACH_GENERIC_IRQ_H #ifndef NR_IRQS -#define NR_IRQS 128 +#define NR_IRQS 128 #endif #ifdef CONFIG_I8259 #ifndef I8259A_IRQ_BASE -#define I8259A_IRQ_BASE 0 +#define I8259A_IRQ_BASE 0 #endif #endif diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h index d7a9efd..73d717a 100644 --- a/arch/mips/include/asm/mach-generic/spaces.h +++ b/arch/mips/include/asm/mach-generic/spaces.h @@ -69,7 +69,7 @@ #define HIGHMEM_START (_AC(1, UL) << _AC(59, UL)) #endif -#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) +#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) #define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK)) #define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK)) diff --git a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h index 624d66c..a323efb 100644 --- a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h +++ b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h @@ -51,8 +51,8 @@ * We might not get launched at the address the kernel is linked to, * so we jump there. */ - PTR_LA t0, 0f - jr t0 + PTR_LA t0, 0f + jr t0 0: .endm diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h index 986a3b9..ebc9377 100644 --- a/arch/mips/include/asm/mach-ip27/mmzone.h +++ b/arch/mips/include/asm/mach-ip27/mmzone.h @@ -7,7 +7,7 @@ #define pa_to_nid(addr) NASID_TO_COMPACT_NODEID(NASID_GET(addr)) -#define LEVELS_PER_SLICE 128 +#define LEVELS_PER_SLICE 128 struct slice_data { unsigned long irq_enable_mask[2]; diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h index b2cf641..defd135 100644 --- a/arch/mips/include/asm/mach-ip27/topology.h +++ b/arch/mips/include/asm/mach-ip27/topology.h @@ -34,7 +34,7 @@ extern int pcibus_to_node(struct pci_bus *); extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; -#define node_distance(from, to) (__node_distances[(from)][(to)]) +#define node_distance(from, to) (__node_distances[(from)][(to)]) #include <asm-generic/topology.h> diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h index 50d344c..65e9c85 100644 --- a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h @@ -28,7 +28,7 @@ #define cpu_has_ic_fills_f_dc 0 #define cpu_has_dsp 0 #define cpu_has_dsp2 0 -#define cpu_icache_snoops_remote_store 1 +#define cpu_icache_snoops_remote_store 1 #define cpu_has_mipsmt 0 #define cpu_has_userlocal 0 diff --git a/arch/mips/include/asm/mach-ip28/spaces.h b/arch/mips/include/asm/mach-ip28/spaces.h index 05aabb2..5edf05d 100644 --- a/arch/mips/include/asm/mach-ip28/spaces.h +++ b/arch/mips/include/asm/mach-ip28/spaces.h @@ -6,7 +6,7 @@ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle * Copyright (C) 2000, 2002 Maciej W. Rozycki * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. - * 2004 pf + * 2004 pf */ #ifndef _ASM_MACH_IP28_SPACES_H #define _ASM_MACH_IP28_SPACES_H diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h index c8fb5aa..073f0c4 100644 --- a/arch/mips/include/asm/mach-ip32/dma-coherence.h +++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h @@ -50,7 +50,7 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, return pa; } -/* This is almost certainly wrong but it's what dma-ip32.c used to use */ +/* This is almost certainly wrong but it's what dma-ip32.c used to use */ static inline unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr) { diff --git a/arch/mips/include/asm/mach-ip32/war.h b/arch/mips/include/asm/mach-ip32/war.h index 7237a93..9807ecd 100644 --- a/arch/mips/include/asm/mach-ip32/war.h +++ b/arch/mips/include/asm/mach-ip32/war.h @@ -17,7 +17,7 @@ #define MIPS4K_ICACHE_REFILL_WAR 0 #define MIPS_CACHE_SYNC_WAR 0 #define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 #define R10000_LLSC_WAR 0 #define MIPS34K_MISSED_ITLB_WAR 0 diff --git a/arch/mips/include/asm/mach-jazz/floppy.h b/arch/mips/include/asm/mach-jazz/floppy.h index 88b5acb..62aa1e2 100644 --- a/arch/mips/include/asm/mach-jazz/floppy.h +++ b/arch/mips/include/asm/mach-jazz/floppy.h @@ -90,7 +90,7 @@ static inline void fd_disable_irq(void) static inline int fd_request_irq(void) { return request_irq(FLOPPY_IRQ, floppy_interrupt, - 0, "floppy", NULL); + 0, "floppy", NULL); } static inline void fd_free_irq(void) diff --git a/arch/mips/include/asm/mach-jz4740/clock.h b/arch/mips/include/asm/mach-jz4740/clock.h index 1b7408d..16659cd 100644 --- a/arch/mips/include/asm/mach-jz4740/clock.h +++ b/arch/mips/include/asm/mach-jz4740/clock.h @@ -2,7 +2,7 @@ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h index a3be121..98b4e7c 100644 --- a/arch/mips/include/asm/mach-jz4740/dma.h +++ b/arch/mips/include/asm/mach-jz4740/dma.h @@ -3,7 +3,7 @@ * JZ7420/JZ4740 DMA definitions * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * @@ -40,9 +40,9 @@ enum jz4740_dma_width { }; enum jz4740_dma_transfer_size { - JZ4740_DMA_TRANSFER_SIZE_4BYTE = 0, - JZ4740_DMA_TRANSFER_SIZE_1BYTE = 1, - JZ4740_DMA_TRANSFER_SIZE_2BYTE = 2, + JZ4740_DMA_TRANSFER_SIZE_4BYTE = 0, + JZ4740_DMA_TRANSFER_SIZE_1BYTE = 1, + JZ4740_DMA_TRANSFER_SIZE_2BYTE = 2, JZ4740_DMA_TRANSFER_SIZE_16BYTE = 3, JZ4740_DMA_TRANSFER_SIZE_32BYTE = 4, }; @@ -87,4 +87,4 @@ uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma); void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma, jz4740_dma_complete_callback_t cb); -#endif /* __ASM_JZ4740_DMA_H__ */ +#endif /* __ASM_JZ4740_DMA_H__ */ diff --git a/arch/mips/include/asm/mach-jz4740/gpio.h b/arch/mips/include/asm/mach-jz4740/gpio.h index 1a6482e..eaacba7 100644 --- a/arch/mips/include/asm/mach-jz4740/gpio.h +++ b/arch/mips/include/asm/mach-jz4740/gpio.h @@ -198,7 +198,7 @@ uint32_t jz_gpio_port_get_value(int port, uint32_t mask); #define JZ_GPIO_FUNC_MEM_ADDR14 JZ_GPIO_FUNC1 #define JZ_GPIO_FUNC_MEM_ADDR15 JZ_GPIO_FUNC1 #define JZ_GPIO_FUNC_MEM_ADDR16 JZ_GPIO_FUNC1 -#define JZ_GPIO_FUNC_LCD_CLS JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_CLS JZ_GPIO_FUNC1 #define JZ_GPIO_FUNC_LCD_SPL JZ_GPIO_FUNC1 #define JZ_GPIO_FUNC_MEM_DCS JZ_GPIO_FUNC1 #define JZ_GPIO_FUNC_MEM_RAS JZ_GPIO_FUNC1 diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h index 5ad1a9c..df50736 100644 --- a/arch/mips/include/asm/mach-jz4740/irq.h +++ b/arch/mips/include/asm/mach-jz4740/irq.h @@ -3,7 +3,7 @@ * JZ4740 IRQ definitions * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h index 163e81d..72cfebd 100644 --- a/arch/mips/include/asm/mach-jz4740/platform.h +++ b/arch/mips/include/asm/mach-jz4740/platform.h @@ -3,7 +3,7 @@ * JZ4740 platform device definitions * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/include/asm/mach-jz4740/timer.h b/arch/mips/include/asm/mach-jz4740/timer.h index a7759fb..8750a1d 100644 --- a/arch/mips/include/asm/mach-jz4740/timer.h +++ b/arch/mips/include/asm/mach-jz4740/timer.h @@ -3,7 +3,7 @@ * JZ4740 platform timer support * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h index fccac35..98d6a2f 100644 --- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h +++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h @@ -44,7 +44,7 @@ /* BOOT_SEL - find what boot media we have */ #define BS_FLASH 0x1 -#define BS_SPI 0x4 +#define BS_SPI 0x4 /* global register ranges */ extern __iomem void *ltq_ebu_membase; diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h index 5e8a6e9..f196cce 100644 --- a/arch/mips/include/asm/mach-lantiq/lantiq.h +++ b/arch/mips/include/asm/mach-lantiq/lantiq.h @@ -34,6 +34,7 @@ extern spinlock_t ebu_lock; extern void ltq_disable_irq(struct irq_data *data); extern void ltq_mask_and_ack_irq(struct irq_data *data); extern void ltq_enable_irq(struct irq_data *data); +extern int ltq_eiu_get_irq(int exin); /* clock handling */ extern int clk_activate(struct clk *clk); @@ -41,6 +42,7 @@ extern void clk_deactivate(struct clk *clk); extern struct clk *clk_get_cpu(void); extern struct clk *clk_get_fpi(void); extern struct clk *clk_get_io(void); +extern struct clk *clk_get_ppe(void); /* find out what bootsource we have */ extern unsigned char ltq_boot_select(void); diff --git a/arch/mips/include/asm/mach-lantiq/war.h b/arch/mips/include/asm/mach-lantiq/war.h index b6c568c..358ca97 100644 --- a/arch/mips/include/asm/mach-lantiq/war.h +++ b/arch/mips/include/asm/mach-lantiq/war.h @@ -7,17 +7,17 @@ #ifndef __ASM_MIPS_MACH_LANTIQ_WAR_H #define __ASM_MIPS_MACH_LANTIQ_WAR_H -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 #endif diff --git a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h index 872943a..5f8693d 100644 --- a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h +++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h @@ -21,7 +21,7 @@ #define LTQ_DESC_SIZE 0x08 /* each descriptor is 64bit */ #define LTQ_DESC_NUM 0x40 /* 64 descriptors / channel */ -#define LTQ_DMA_OWN BIT(31) /* owner bit */ +#define LTQ_DMA_OWN BIT(31) /* owner bit */ #define LTQ_DMA_C BIT(30) /* complete bit */ #define LTQ_DMA_SOP BIT(29) /* start of packet */ #define LTQ_DMA_EOP BIT(28) /* end of packet */ @@ -38,7 +38,7 @@ struct ltq_dma_channel { int nr; /* the channel number */ int irq; /* the mapped irq */ int desc; /* the current descriptor */ - struct ltq_dma_desc *desc_base; /* the descriptor base */ + struct ltq_dma_desc *desc_base; /* the descriptor base */ int phys; /* physical addr */ }; diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h index 1a9ad45..c253d3f 100644 --- a/arch/mips/include/asm/mach-lasat/mach-gt64120.h +++ b/arch/mips/include/asm/mach-lasat/mach-gt64120.h @@ -1,6 +1,6 @@ /* * This is a direct copy of the ev96100.h file, with a global - * search and replace. The numbers are the same. + * search and replace. The numbers are the same. * * The reason I'm duplicating this is so that the 64120/96100 * defines won't be confusing in the source code. @@ -18,8 +18,8 @@ * * (Guessing ...) */ -#define GT_PCI_MEM_BASE 0x12000000UL -#define GT_PCI_MEM_SIZE 0x02000000UL +#define GT_PCI_MEM_BASE 0x12000000UL +#define GT_PCI_MEM_SIZE 0x02000000UL #define GT_PCI_IO_BASE 0x10000000UL #define GT_PCI_IO_SIZE 0x02000000UL #define GT_ISA_IO_BASE PCI_IO_BASE diff --git a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h index 1a05d85..75fd8c0 100644 --- a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h @@ -8,9 +8,9 @@ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org> * * reference: /proc/cpuinfo, - * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy), - * arch/mips/kernel/proc.c(show_cpuinfo), - * loongson2f user manual. + * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy), + * arch/mips/kernel/proc.c(show_cpuinfo), + * loongson2f user manual. */ #ifndef __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H @@ -37,7 +37,7 @@ #define cpu_has_fpu 1 #define cpu_has_ic_fills_f_dc 0 #define cpu_has_inclusive_pcaches 1 -#define cpu_has_llsc 1 +#define cpu_has_llsc 1 #define cpu_has_mcheck 0 #define cpu_has_mdmx 0 #define cpu_has_mips16 0 diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h index 2a8e2bb..a0ee0cb 100644 --- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h @@ -5,8 +5,8 @@ * Author : jlliu <liujl@lemote.com> */ -#ifndef _CS5536_H -#define _CS5536_H +#ifndef _CS5536_H +#define _CS5536_H #include <linux/types.h> @@ -16,237 +16,237 @@ extern void _wrmsr(u32 msr, u32 hi, u32 lo); /* * MSR module base */ -#define CS5536_SB_MSR_BASE (0x00000000) -#define CS5536_GLIU_MSR_BASE (0x10000000) -#define CS5536_ILLEGAL_MSR_BASE (0x20000000) -#define CS5536_USB_MSR_BASE (0x40000000) -#define CS5536_IDE_MSR_BASE (0x60000000) -#define CS5536_DIVIL_MSR_BASE (0x80000000) -#define CS5536_ACC_MSR_BASE (0xa0000000) -#define CS5536_UNUSED_MSR_BASE (0xc0000000) -#define CS5536_GLCP_MSR_BASE (0xe0000000) +#define CS5536_SB_MSR_BASE (0x00000000) +#define CS5536_GLIU_MSR_BASE (0x10000000) +#define CS5536_ILLEGAL_MSR_BASE (0x20000000) +#define CS5536_USB_MSR_BASE (0x40000000) +#define CS5536_IDE_MSR_BASE (0x60000000) +#define CS5536_DIVIL_MSR_BASE (0x80000000) +#define CS5536_ACC_MSR_BASE (0xa0000000) +#define CS5536_UNUSED_MSR_BASE (0xc0000000) +#define CS5536_GLCP_MSR_BASE (0xe0000000) -#define SB_MSR_REG(offset) (CS5536_SB_MSR_BASE | (offset)) -#define GLIU_MSR_REG(offset) (CS5536_GLIU_MSR_BASE | (offset)) -#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset)) -#define USB_MSR_REG(offset) (CS5536_USB_MSR_BASE | (offset)) -#define IDE_MSR_REG(offset) (CS5536_IDE_MSR_BASE | (offset)) -#define DIVIL_MSR_REG(offset) (CS5536_DIVIL_MSR_BASE | (offset)) -#define ACC_MSR_REG(offset) (CS5536_ACC_MSR_BASE | (offset)) -#define UNUSED_MSR_REG(offset) (CS5536_UNUSED_MSR_BASE | (offset)) -#define GLCP_MSR_REG(offset) (CS5536_GLCP_MSR_BASE | (offset)) +#define SB_MSR_REG(offset) (CS5536_SB_MSR_BASE | (offset)) +#define GLIU_MSR_REG(offset) (CS5536_GLIU_MSR_BASE | (offset)) +#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset)) +#define USB_MSR_REG(offset) (CS5536_USB_MSR_BASE | (offset)) +#define IDE_MSR_REG(offset) (CS5536_IDE_MSR_BASE | (offset)) +#define DIVIL_MSR_REG(offset) (CS5536_DIVIL_MSR_BASE | (offset)) +#define ACC_MSR_REG(offset) (CS5536_ACC_MSR_BASE | (offset)) +#define UNUSED_MSR_REG(offset) (CS5536_UNUSED_MSR_BASE | (offset)) +#define GLCP_MSR_REG(offset) (CS5536_GLCP_MSR_BASE | (offset)) /* * BAR SPACE OF VIRTUAL PCI : * range for pci probe use, length is the actual size. */ /* IO space for all DIVIL modules */ -#define CS5536_IRQ_RANGE 0xffffffe0 /* USERD FOR PCI PROBE */ -#define CS5536_IRQ_LENGTH 0x20 /* THE REGS ACTUAL LENGTH */ -#define CS5536_SMB_RANGE 0xfffffff8 -#define CS5536_SMB_LENGTH 0x08 -#define CS5536_GPIO_RANGE 0xffffff00 -#define CS5536_GPIO_LENGTH 0x100 -#define CS5536_MFGPT_RANGE 0xffffffc0 -#define CS5536_MFGPT_LENGTH 0x40 -#define CS5536_ACPI_RANGE 0xffffffe0 -#define CS5536_ACPI_LENGTH 0x20 -#define CS5536_PMS_RANGE 0xffffff80 -#define CS5536_PMS_LENGTH 0x80 +#define CS5536_IRQ_RANGE 0xffffffe0 /* USERD FOR PCI PROBE */ +#define CS5536_IRQ_LENGTH 0x20 /* THE REGS ACTUAL LENGTH */ +#define CS5536_SMB_RANGE 0xfffffff8 +#define CS5536_SMB_LENGTH 0x08 +#define CS5536_GPIO_RANGE 0xffffff00 +#define CS5536_GPIO_LENGTH 0x100 +#define CS5536_MFGPT_RANGE 0xffffffc0 +#define CS5536_MFGPT_LENGTH 0x40 +#define CS5536_ACPI_RANGE 0xffffffe0 +#define CS5536_ACPI_LENGTH 0x20 +#define CS5536_PMS_RANGE 0xffffff80 +#define CS5536_PMS_LENGTH 0x80 /* IO space for IDE */ -#define CS5536_IDE_RANGE 0xfffffff0 -#define CS5536_IDE_LENGTH 0x10 +#define CS5536_IDE_RANGE 0xfffffff0 +#define CS5536_IDE_LENGTH 0x10 /* IO space for ACC */ -#define CS5536_ACC_RANGE 0xffffff80 -#define CS5536_ACC_LENGTH 0x80 +#define CS5536_ACC_RANGE 0xffffff80 +#define CS5536_ACC_LENGTH 0x80 /* MEM space for ALL USB modules */ -#define CS5536_OHCI_RANGE 0xfffff000 -#define CS5536_OHCI_LENGTH 0x1000 -#define CS5536_EHCI_RANGE 0xfffff000 -#define CS5536_EHCI_LENGTH 0x1000 +#define CS5536_OHCI_RANGE 0xfffff000 +#define CS5536_OHCI_LENGTH 0x1000 +#define CS5536_EHCI_RANGE 0xfffff000 +#define CS5536_EHCI_LENGTH 0x1000 /* * PCI MSR ACCESS */ -#define PCI_MSR_CTRL 0xF0 -#define PCI_MSR_ADDR 0xF4 -#define PCI_MSR_DATA_LO 0xF8 -#define PCI_MSR_DATA_HI 0xFC +#define PCI_MSR_CTRL 0xF0 +#define PCI_MSR_ADDR 0xF4 +#define PCI_MSR_DATA_LO 0xF8 +#define PCI_MSR_DATA_HI 0xFC /**************** MSR *****************************/ /* * GLIU STANDARD MSR */ -#define GLIU_CAP 0x00 -#define GLIU_CONFIG 0x01 -#define GLIU_SMI 0x02 -#define GLIU_ERROR 0x03 -#define GLIU_PM 0x04 -#define GLIU_DIAG 0x05 +#define GLIU_CAP 0x00 +#define GLIU_CONFIG 0x01 +#define GLIU_SMI 0x02 +#define GLIU_ERROR 0x03 +#define GLIU_PM 0x04 +#define GLIU_DIAG 0x05 /* * GLIU SPEC. MSR */ -#define GLIU_P2D_BM0 0x20 -#define GLIU_P2D_BM1 0x21 -#define GLIU_P2D_BM2 0x22 -#define GLIU_P2D_BMK0 0x23 -#define GLIU_P2D_BMK1 0x24 -#define GLIU_P2D_BM3 0x25 -#define GLIU_P2D_BM4 0x26 -#define GLIU_COH 0x80 -#define GLIU_PAE 0x81 -#define GLIU_ARB 0x82 -#define GLIU_ASMI 0x83 -#define GLIU_AERR 0x84 -#define GLIU_DEBUG 0x85 -#define GLIU_PHY_CAP 0x86 -#define GLIU_NOUT_RESP 0x87 -#define GLIU_NOUT_WDATA 0x88 -#define GLIU_WHOAMI 0x8B -#define GLIU_SLV_DIS 0x8C -#define GLIU_IOD_BM0 0xE0 -#define GLIU_IOD_BM1 0xE1 -#define GLIU_IOD_BM2 0xE2 -#define GLIU_IOD_BM3 0xE3 -#define GLIU_IOD_BM4 0xE4 -#define GLIU_IOD_BM5 0xE5 -#define GLIU_IOD_BM6 0xE6 -#define GLIU_IOD_BM7 0xE7 -#define GLIU_IOD_BM8 0xE8 -#define GLIU_IOD_BM9 0xE9 -#define GLIU_IOD_SC0 0xEA -#define GLIU_IOD_SC1 0xEB -#define GLIU_IOD_SC2 0xEC -#define GLIU_IOD_SC3 0xED -#define GLIU_IOD_SC4 0xEE -#define GLIU_IOD_SC5 0xEF -#define GLIU_IOD_SC6 0xF0 -#define GLIU_IOD_SC7 0xF1 +#define GLIU_P2D_BM0 0x20 +#define GLIU_P2D_BM1 0x21 +#define GLIU_P2D_BM2 0x22 +#define GLIU_P2D_BMK0 0x23 +#define GLIU_P2D_BMK1 0x24 +#define GLIU_P2D_BM3 0x25 +#define GLIU_P2D_BM4 0x26 +#define GLIU_COH 0x80 +#define GLIU_PAE 0x81 +#define GLIU_ARB 0x82 +#define GLIU_ASMI 0x83 +#define GLIU_AERR 0x84 +#define GLIU_DEBUG 0x85 +#define GLIU_PHY_CAP 0x86 +#define GLIU_NOUT_RESP 0x87 +#define GLIU_NOUT_WDATA 0x88 +#define GLIU_WHOAMI 0x8B +#define GLIU_SLV_DIS 0x8C +#define GLIU_IOD_BM0 0xE0 +#define GLIU_IOD_BM1 0xE1 +#define GLIU_IOD_BM2 0xE2 +#define GLIU_IOD_BM3 0xE3 +#define GLIU_IOD_BM4 0xE4 +#define GLIU_IOD_BM5 0xE5 +#define GLIU_IOD_BM6 0xE6 +#define GLIU_IOD_BM7 0xE7 +#define GLIU_IOD_BM8 0xE8 +#define GLIU_IOD_BM9 0xE9 +#define GLIU_IOD_SC0 0xEA +#define GLIU_IOD_SC1 0xEB +#define GLIU_IOD_SC2 0xEC +#define GLIU_IOD_SC3 0xED +#define GLIU_IOD_SC4 0xEE +#define GLIU_IOD_SC5 0xEF +#define GLIU_IOD_SC6 0xF0 +#define GLIU_IOD_SC7 0xF1 /* * SB STANDARD */ -#define SB_CAP 0x00 -#define SB_CONFIG 0x01 -#define SB_SMI 0x02 -#define SB_ERROR 0x03 -#define SB_MAR_ERR_EN 0x00000001 -#define SB_TAR_ERR_EN 0x00000002 -#define SB_RSVD_BIT1 0x00000004 -#define SB_EXCEP_ERR_EN 0x00000008 -#define SB_SYSE_ERR_EN 0x00000010 -#define SB_PARE_ERR_EN 0x00000020 -#define SB_TAS_ERR_EN 0x00000040 -#define SB_MAR_ERR_FLAG 0x00010000 -#define SB_TAR_ERR_FLAG 0x00020000 -#define SB_RSVD_BIT2 0x00040000 -#define SB_EXCEP_ERR_FLAG 0x00080000 -#define SB_SYSE_ERR_FLAG 0x00100000 -#define SB_PARE_ERR_FLAG 0x00200000 -#define SB_TAS_ERR_FLAG 0x00400000 -#define SB_PM 0x04 -#define SB_DIAG 0x05 +#define SB_CAP 0x00 +#define SB_CONFIG 0x01 +#define SB_SMI 0x02 +#define SB_ERROR 0x03 +#define SB_MAR_ERR_EN 0x00000001 +#define SB_TAR_ERR_EN 0x00000002 +#define SB_RSVD_BIT1 0x00000004 +#define SB_EXCEP_ERR_EN 0x00000008 +#define SB_SYSE_ERR_EN 0x00000010 +#define SB_PARE_ERR_EN 0x00000020 +#define SB_TAS_ERR_EN 0x00000040 +#define SB_MAR_ERR_FLAG 0x00010000 +#define SB_TAR_ERR_FLAG 0x00020000 +#define SB_RSVD_BIT2 0x00040000 +#define SB_EXCEP_ERR_FLAG 0x00080000 +#define SB_SYSE_ERR_FLAG 0x00100000 +#define SB_PARE_ERR_FLAG 0x00200000 +#define SB_TAS_ERR_FLAG 0x00400000 +#define SB_PM 0x04 +#define SB_DIAG 0x05 /* * SB SPEC. */ -#define SB_CTRL 0x10 -#define SB_R0 0x20 -#define SB_R1 0x21 -#define SB_R2 0x22 -#define SB_R3 0x23 -#define SB_R4 0x24 -#define SB_R5 0x25 -#define SB_R6 0x26 -#define SB_R7 0x27 -#define SB_R8 0x28 -#define SB_R9 0x29 -#define SB_R10 0x2A -#define SB_R11 0x2B -#define SB_R12 0x2C -#define SB_R13 0x2D -#define SB_R14 0x2E -#define SB_R15 0x2F +#define SB_CTRL 0x10 +#define SB_R0 0x20 +#define SB_R1 0x21 +#define SB_R2 0x22 +#define SB_R3 0x23 +#define SB_R4 0x24 +#define SB_R5 0x25 +#define SB_R6 0x26 +#define SB_R7 0x27 +#define SB_R8 0x28 +#define SB_R9 0x29 +#define SB_R10 0x2A +#define SB_R11 0x2B +#define SB_R12 0x2C +#define SB_R13 0x2D +#define SB_R14 0x2E +#define SB_R15 0x2F /* * GLCP STANDARD */ -#define GLCP_CAP 0x00 -#define GLCP_CONFIG 0x01 -#define GLCP_SMI 0x02 -#define GLCP_ERROR 0x03 -#define GLCP_PM 0x04 -#define GLCP_DIAG 0x05 +#define GLCP_CAP 0x00 +#define GLCP_CONFIG 0x01 +#define GLCP_SMI 0x02 +#define GLCP_ERROR 0x03 +#define GLCP_PM 0x04 +#define GLCP_DIAG 0x05 /* * GLCP SPEC. */ -#define GLCP_CLK_DIS_DELAY 0x08 -#define GLCP_PM_CLK_DISABLE 0x09 -#define GLCP_GLB_PM 0x0B -#define GLCP_DBG_OUT 0x0C -#define GLCP_RSVD1 0x0D -#define GLCP_SOFT_COM 0x0E -#define SOFT_BAR_SMB_FLAG 0x00000001 -#define SOFT_BAR_GPIO_FLAG 0x00000002 -#define SOFT_BAR_MFGPT_FLAG 0x00000004 -#define SOFT_BAR_IRQ_FLAG 0x00000008 -#define SOFT_BAR_PMS_FLAG 0x00000010 -#define SOFT_BAR_ACPI_FLAG 0x00000020 -#define SOFT_BAR_IDE_FLAG 0x00000400 -#define SOFT_BAR_ACC_FLAG 0x00000800 -#define SOFT_BAR_OHCI_FLAG 0x00001000 -#define SOFT_BAR_EHCI_FLAG 0x00002000 -#define GLCP_RSVD2 0x0F -#define GLCP_CLK_OFF 0x10 -#define GLCP_CLK_ACTIVE 0x11 -#define GLCP_CLK_DISABLE 0x12 -#define GLCP_CLK4ACK 0x13 -#define GLCP_SYS_RST 0x14 -#define GLCP_RSVD3 0x15 -#define GLCP_DBG_CLK_CTRL 0x16 -#define GLCP_CHIP_REV_ID 0x17 +#define GLCP_CLK_DIS_DELAY 0x08 +#define GLCP_PM_CLK_DISABLE 0x09 +#define GLCP_GLB_PM 0x0B +#define GLCP_DBG_OUT 0x0C +#define GLCP_RSVD1 0x0D +#define GLCP_SOFT_COM 0x0E +#define SOFT_BAR_SMB_FLAG 0x00000001 +#define SOFT_BAR_GPIO_FLAG 0x00000002 +#define SOFT_BAR_MFGPT_FLAG 0x00000004 +#define SOFT_BAR_IRQ_FLAG 0x00000008 +#define SOFT_BAR_PMS_FLAG 0x00000010 +#define SOFT_BAR_ACPI_FLAG 0x00000020 +#define SOFT_BAR_IDE_FLAG 0x00000400 +#define SOFT_BAR_ACC_FLAG 0x00000800 +#define SOFT_BAR_OHCI_FLAG 0x00001000 +#define SOFT_BAR_EHCI_FLAG 0x00002000 +#define GLCP_RSVD2 0x0F +#define GLCP_CLK_OFF 0x10 +#define GLCP_CLK_ACTIVE 0x11 +#define GLCP_CLK_DISABLE 0x12 +#define GLCP_CLK4ACK 0x13 +#define GLCP_SYS_RST 0x14 +#define GLCP_RSVD3 0x15 +#define GLCP_DBG_CLK_CTRL 0x16 +#define GLCP_CHIP_REV_ID 0x17 /* PIC */ -#define PIC_YSEL_LOW 0x20 -#define PIC_YSEL_LOW_USB_SHIFT 8 -#define PIC_YSEL_LOW_ACC_SHIFT 16 -#define PIC_YSEL_LOW_FLASH_SHIFT 24 -#define PIC_YSEL_HIGH 0x21 -#define PIC_ZSEL_LOW 0x22 -#define PIC_ZSEL_HIGH 0x23 -#define PIC_IRQM_PRIM 0x24 -#define PIC_IRQM_LPC 0x25 -#define PIC_XIRR_STS_LOW 0x26 -#define PIC_XIRR_STS_HIGH 0x27 -#define PCI_SHDW 0x34 +#define PIC_YSEL_LOW 0x20 +#define PIC_YSEL_LOW_USB_SHIFT 8 +#define PIC_YSEL_LOW_ACC_SHIFT 16 +#define PIC_YSEL_LOW_FLASH_SHIFT 24 +#define PIC_YSEL_HIGH 0x21 +#define PIC_ZSEL_LOW 0x22 +#define PIC_ZSEL_HIGH 0x23 +#define PIC_IRQM_PRIM 0x24 +#define PIC_IRQM_LPC 0x25 +#define PIC_XIRR_STS_LOW 0x26 +#define PIC_XIRR_STS_HIGH 0x27 +#define PCI_SHDW 0x34 /* * DIVIL STANDARD */ -#define DIVIL_CAP 0x00 -#define DIVIL_CONFIG 0x01 -#define DIVIL_SMI 0x02 -#define DIVIL_ERROR 0x03 -#define DIVIL_PM 0x04 -#define DIVIL_DIAG 0x05 +#define DIVIL_CAP 0x00 +#define DIVIL_CONFIG 0x01 +#define DIVIL_SMI 0x02 +#define DIVIL_ERROR 0x03 +#define DIVIL_PM 0x04 +#define DIVIL_DIAG 0x05 /* * DIVIL SPEC. */ -#define DIVIL_LBAR_IRQ 0x08 -#define DIVIL_LBAR_KEL 0x09 -#define DIVIL_LBAR_SMB 0x0B -#define DIVIL_LBAR_GPIO 0x0C -#define DIVIL_LBAR_MFGPT 0x0D -#define DIVIL_LBAR_ACPI 0x0E -#define DIVIL_LBAR_PMS 0x0F -#define DIVIL_LEG_IO 0x14 -#define DIVIL_BALL_OPTS 0x15 -#define DIVIL_SOFT_IRQ 0x16 -#define DIVIL_SOFT_RESET 0x17 +#define DIVIL_LBAR_IRQ 0x08 +#define DIVIL_LBAR_KEL 0x09 +#define DIVIL_LBAR_SMB 0x0B +#define DIVIL_LBAR_GPIO 0x0C +#define DIVIL_LBAR_MFGPT 0x0D +#define DIVIL_LBAR_ACPI 0x0E +#define DIVIL_LBAR_PMS 0x0F +#define DIVIL_LEG_IO 0x14 +#define DIVIL_BALL_OPTS 0x15 +#define DIVIL_SOFT_IRQ 0x16 +#define DIVIL_SOFT_RESET 0x17 /* MFGPT */ #define MFGPT_IRQ 0x28 @@ -254,52 +254,52 @@ extern void _wrmsr(u32 msr, u32 hi, u32 lo); /* * IDE STANDARD */ -#define IDE_CAP 0x00 -#define IDE_CONFIG 0x01 -#define IDE_SMI 0x02 -#define IDE_ERROR 0x03 -#define IDE_PM 0x04 -#define IDE_DIAG 0x05 +#define IDE_CAP 0x00 +#define IDE_CONFIG 0x01 +#define IDE_SMI 0x02 +#define IDE_ERROR 0x03 +#define IDE_PM 0x04 +#define IDE_DIAG 0x05 /* * IDE SPEC. */ -#define IDE_IO_BAR 0x08 -#define IDE_CFG 0x10 -#define IDE_DTC 0x12 -#define IDE_CAST 0x13 -#define IDE_ETC 0x14 -#define IDE_INTERNAL_PM 0x15 +#define IDE_IO_BAR 0x08 +#define IDE_CFG 0x10 +#define IDE_DTC 0x12 +#define IDE_CAST 0x13 +#define IDE_ETC 0x14 +#define IDE_INTERNAL_PM 0x15 /* * ACC STANDARD */ -#define ACC_CAP 0x00 -#define ACC_CONFIG 0x01 -#define ACC_SMI 0x02 -#define ACC_ERROR 0x03 -#define ACC_PM 0x04 -#define ACC_DIAG 0x05 +#define ACC_CAP 0x00 +#define ACC_CONFIG 0x01 +#define ACC_SMI 0x02 +#define ACC_ERROR 0x03 +#define ACC_PM 0x04 +#define ACC_DIAG 0x05 /* * USB STANDARD */ -#define USB_CAP 0x00 -#define USB_CONFIG 0x01 -#define USB_SMI 0x02 -#define USB_ERROR 0x03 -#define USB_PM 0x04 -#define USB_DIAG 0x05 +#define USB_CAP 0x00 +#define USB_CONFIG 0x01 +#define USB_SMI 0x02 +#define USB_ERROR 0x03 +#define USB_PM 0x04 +#define USB_DIAG 0x05 /* * USB SPEC. */ -#define USB_OHCI 0x08 -#define USB_EHCI 0x09 +#define USB_OHCI 0x08 +#define USB_EHCI 0x09 /****************** NATIVE ***************************/ /* GPIO : I/O SPACE; REG : 32BITS */ -#define GPIOL_OUT_VAL 0x00 -#define GPIOL_OUT_EN 0x04 +#define GPIOL_OUT_VAL 0x00 +#define GPIOL_OUT_EN 0x04 #endif /* _CS5536_H */ diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h index 4b493d6..021d017 100644 --- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h @@ -25,7 +25,7 @@ static inline void __maybe_unused enable_mfgpt0_counter(void) #endif #define MFGPT_TICK_RATE 14318000 -#define COMPARE ((MFGPT_TICK_RATE + HZ/2) / HZ) +#define COMPARE ((MFGPT_TICK_RATE + HZ/2) / HZ) #define MFGPT_BASE mfgpt_base #define MFGPT0_CMP2 (MFGPT_BASE + 2) diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h index 0dca9c8..8a7ecb4 100644 --- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h @@ -8,8 +8,8 @@ * Author : jlliu, liujl@lemote.com */ -#ifndef _CS5536_PCI_H -#define _CS5536_PCI_H +#ifndef _CS5536_PCI_H +#define _CS5536_PCI_H #include <linux/types.h> #include <linux/pci_regs.h> @@ -17,20 +17,20 @@ extern void cs5536_pci_conf_write4(int function, int reg, u32 value); extern u32 cs5536_pci_conf_read4(int function, int reg); -#define CS5536_ACC_INTR 9 -#define CS5536_IDE_INTR 14 -#define CS5536_USB_INTR 11 -#define CS5536_MFGPT_INTR 5 -#define CS5536_UART1_INTR 4 -#define CS5536_UART2_INTR 3 +#define CS5536_ACC_INTR 9 +#define CS5536_IDE_INTR 14 +#define CS5536_USB_INTR 11 +#define CS5536_MFGPT_INTR 5 +#define CS5536_UART1_INTR 4 +#define CS5536_UART2_INTR 3 /************** PCI BUS DEVICE FUNCTION ***************/ /* * PCI bus device function */ -#define PCI_BUS_CS5536 0 -#define PCI_IDSEL_CS5536 14 +#define PCI_BUS_CS5536 0 +#define PCI_IDSEL_CS5536 14 /********** STANDARD PCI-2.2 EXPANSION ****************/ @@ -45,21 +45,21 @@ extern u32 cs5536_pci_conf_read4(int function, int reg); (((mod_dev_id) << 16) | (sys_vendor_id)) /* VENDOR ID */ -#define CS5536_VENDOR_ID 0x1022 +#define CS5536_VENDOR_ID 0x1022 /* DEVICE ID */ -#define CS5536_ISA_DEVICE_ID 0x2090 -#define CS5536_IDE_DEVICE_ID 0x209a -#define CS5536_ACC_DEVICE_ID 0x2093 -#define CS5536_OHCI_DEVICE_ID 0x2094 -#define CS5536_EHCI_DEVICE_ID 0x2095 +#define CS5536_ISA_DEVICE_ID 0x2090 +#define CS5536_IDE_DEVICE_ID 0x209a +#define CS5536_ACC_DEVICE_ID 0x2093 +#define CS5536_OHCI_DEVICE_ID 0x2094 +#define CS5536_EHCI_DEVICE_ID 0x2095 /* CLASS CODE : CLASS SUB-CLASS INTERFACE */ -#define CS5536_ISA_CLASS_CODE 0x060100 +#define CS5536_ISA_CLASS_CODE 0x060100 #define CS5536_IDE_CLASS_CODE 0x010180 -#define CS5536_ACC_CLASS_CODE 0x040100 -#define CS5536_OHCI_CLASS_CODE 0x0C0310 -#define CS5536_EHCI_CLASS_CODE 0x0C0320 +#define CS5536_ACC_CLASS_CODE 0x040100 +#define CS5536_OHCI_CLASS_CODE 0x0C0310 +#define CS5536_EHCI_CLASS_CODE 0x0C0320 /* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */ @@ -67,40 +67,40 @@ extern u32 cs5536_pci_conf_read4(int function, int reg); ((PCI_NONE_BIST << 24) | ((header_type) << 16) \ | ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE); -#define PCI_NONE_BIST 0x00 /* RO not implemented yet. */ -#define PCI_BRIDGE_HEADER_TYPE 0x80 /* RO */ -#define PCI_NORMAL_HEADER_TYPE 0x00 -#define PCI_NORMAL_LATENCY_TIMER 0x00 -#define PCI_NORMAL_CACHE_LINE_SIZE 0x08 /* RW */ +#define PCI_NONE_BIST 0x00 /* RO not implemented yet. */ +#define PCI_BRIDGE_HEADER_TYPE 0x80 /* RO */ +#define PCI_NORMAL_HEADER_TYPE 0x00 +#define PCI_NORMAL_LATENCY_TIMER 0x00 +#define PCI_NORMAL_CACHE_LINE_SIZE 0x08 /* RW */ /* BAR */ -#define PCI_BAR0_REG 0x10 -#define PCI_BAR1_REG 0x14 -#define PCI_BAR2_REG 0x18 -#define PCI_BAR3_REG 0x1c -#define PCI_BAR4_REG 0x20 -#define PCI_BAR5_REG 0x24 -#define PCI_BAR_COUNT 6 -#define PCI_BAR_RANGE_MASK 0xFFFFFFFF +#define PCI_BAR0_REG 0x10 +#define PCI_BAR1_REG 0x14 +#define PCI_BAR2_REG 0x18 +#define PCI_BAR3_REG 0x1c +#define PCI_BAR4_REG 0x20 +#define PCI_BAR5_REG 0x24 +#define PCI_BAR_COUNT 6 +#define PCI_BAR_RANGE_MASK 0xFFFFFFFF /* CARDBUS CIS POINTER */ -#define PCI_CARDBUS_CIS_POINTER 0x00000000 +#define PCI_CARDBUS_CIS_POINTER 0x00000000 -/* SUBSYSTEM VENDOR ID */ -#define CS5536_SUB_VENDOR_ID CS5536_VENDOR_ID +/* SUBSYSTEM VENDOR ID */ +#define CS5536_SUB_VENDOR_ID CS5536_VENDOR_ID /* SUBSYSTEM ID */ -#define CS5536_ISA_SUB_ID CS5536_ISA_DEVICE_ID -#define CS5536_IDE_SUB_ID CS5536_IDE_DEVICE_ID -#define CS5536_ACC_SUB_ID CS5536_ACC_DEVICE_ID -#define CS5536_OHCI_SUB_ID CS5536_OHCI_DEVICE_ID -#define CS5536_EHCI_SUB_ID CS5536_EHCI_DEVICE_ID +#define CS5536_ISA_SUB_ID CS5536_ISA_DEVICE_ID +#define CS5536_IDE_SUB_ID CS5536_IDE_DEVICE_ID +#define CS5536_ACC_SUB_ID CS5536_ACC_DEVICE_ID +#define CS5536_OHCI_SUB_ID CS5536_OHCI_DEVICE_ID +#define CS5536_EHCI_SUB_ID CS5536_EHCI_DEVICE_ID /* EXPANSION ROM BAR */ -#define PCI_EXPANSION_ROM_BAR 0x00000000 +#define PCI_EXPANSION_ROM_BAR 0x00000000 /* CAPABILITIES POINTER */ -#define PCI_CAPLIST_POINTER 0x00000000 +#define PCI_CAPLIST_POINTER 0x00000000 #define PCI_CAPLIST_USB_POINTER 0x40 /* INTERRUPT */ @@ -108,46 +108,46 @@ extern u32 cs5536_pci_conf_read4(int function, int reg); ((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \ ((pin) << 8) | (mod_intr)) -#define PCI_MAX_LATENCY 0x40 -#define PCI_MIN_GRANT 0x00 -#define PCI_DEFAULT_PIN 0x01 +#define PCI_MAX_LATENCY 0x40 +#define PCI_MIN_GRANT 0x00 +#define PCI_DEFAULT_PIN 0x01 /*********** EXPANSION PCI REG ************************/ /* * ISA EXPANSION */ -#define PCI_UART1_INT_REG 0x50 +#define PCI_UART1_INT_REG 0x50 #define PCI_UART2_INT_REG 0x54 -#define PCI_ISA_FIXUP_REG 0x58 +#define PCI_ISA_FIXUP_REG 0x58 /* * IDE EXPANSION */ -#define PCI_IDE_CFG_REG 0x40 -#define CS5536_IDE_FLASH_SIGNATURE 0xDEADBEEF -#define PCI_IDE_DTC_REG 0x48 -#define PCI_IDE_CAST_REG 0x4C -#define PCI_IDE_ETC_REG 0x50 -#define PCI_IDE_PM_REG 0x54 -#define PCI_IDE_INT_REG 0x60 +#define PCI_IDE_CFG_REG 0x40 +#define CS5536_IDE_FLASH_SIGNATURE 0xDEADBEEF +#define PCI_IDE_DTC_REG 0x48 +#define PCI_IDE_CAST_REG 0x4C +#define PCI_IDE_ETC_REG 0x50 +#define PCI_IDE_PM_REG 0x54 +#define PCI_IDE_INT_REG 0x60 /* * ACC EXPANSION */ -#define PCI_ACC_INT_REG 0x50 +#define PCI_ACC_INT_REG 0x50 /* * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI */ -#define PCI_OHCI_PM_REG 0x40 -#define PCI_OHCI_INT_REG 0x50 +#define PCI_OHCI_PM_REG 0x40 +#define PCI_OHCI_INT_REG 0x50 /* * EHCI EXPANSION */ -#define PCI_EHCI_LEGSMIEN_REG 0x50 -#define PCI_EHCI_LEGSMISTS_REG 0x54 -#define PCI_EHCI_FLADJ_REG 0x60 +#define PCI_EHCI_LEGSMIEN_REG 0x50 +#define PCI_EHCI_LEGSMISTS_REG 0x54 +#define PCI_EHCI_FLADJ_REG 0x60 #endif /* _CS5536_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h index 21c4ece..1f17c18 100644 --- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h @@ -5,8 +5,8 @@ * Author: Wu Zhangjin <wuzhangjin@gmail.com> */ -#ifndef _CS5536_VSM_H -#define _CS5536_VSM_H +#ifndef _CS5536_VSM_H +#define _CS5536_VSM_H #include <linux/types.h> diff --git a/arch/mips/include/asm/mach-loongson/gpio.h b/arch/mips/include/asm/mach-loongson/gpio.h index e30e73d..211a7b7 100644 --- a/arch/mips/include/asm/mach-loongson/gpio.h +++ b/arch/mips/include/asm/mach-loongson/gpio.h @@ -10,8 +10,8 @@ * (at your option) any later version. */ -#ifndef __STLS2F_GPIO_H -#define __STLS2F_GPIO_H +#ifndef __STLS2F_GPIO_H +#define __STLS2F_GPIO_H #include <asm-generic/gpio.h> diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index 5222a00..b286534 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -2,8 +2,8 @@ * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin <wuzhangjin@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -52,7 +52,7 @@ extern void mach_irq_dispatch(unsigned int pending); extern int mach_i8259_irq(void); /* We need this in some places... */ -#define delay() ({ \ +#define delay() ({ \ int x; \ for (x = 0; x < 100000; x++) \ __asm__ __volatile__(""); \ @@ -82,13 +82,13 @@ static inline void do_perfcnt_IRQ(void) #define LOONGSON_BOOT_BASE 0x1fc00000 #define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */ -#define LOONGSON_BOOT_TOP (LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1) -#define LOONGSON_REG_BASE 0x1fe00000 -#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */ +#define LOONGSON_BOOT_TOP (LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1) +#define LOONGSON_REG_BASE 0x1fe00000 +#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */ #define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1) -#define LOONGSON_LIO1_BASE 0x1ff00000 -#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */ +#define LOONGSON_LIO1_BASE 0x1ff00000 +#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */ #define LOONGSON_LIO1_TOP (LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1) #define LOONGSON_PCILO0_BASE 0x10000000 @@ -115,13 +115,13 @@ static inline void do_perfcnt_IRQ(void) #define LOONGSON_PCI_REG(x) LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x)) #define LOONGSON_PCIDID LOONGSON_PCI_REG(0x00) #define LOONGSON_PCICMD LOONGSON_PCI_REG(0x04) -#define LOONGSON_PCICLASS LOONGSON_PCI_REG(0x08) +#define LOONGSON_PCICLASS LOONGSON_PCI_REG(0x08) #define LOONGSON_PCILTIMER LOONGSON_PCI_REG(0x0c) -#define LOONGSON_PCIBASE0 LOONGSON_PCI_REG(0x10) -#define LOONGSON_PCIBASE1 LOONGSON_PCI_REG(0x14) -#define LOONGSON_PCIBASE2 LOONGSON_PCI_REG(0x18) -#define LOONGSON_PCIBASE3 LOONGSON_PCI_REG(0x1c) -#define LOONGSON_PCIBASE4 LOONGSON_PCI_REG(0x20) +#define LOONGSON_PCIBASE0 LOONGSON_PCI_REG(0x10) +#define LOONGSON_PCIBASE1 LOONGSON_PCI_REG(0x14) +#define LOONGSON_PCIBASE2 LOONGSON_PCI_REG(0x18) +#define LOONGSON_PCIBASE3 LOONGSON_PCI_REG(0x1c) +#define LOONGSON_PCIBASE4 LOONGSON_PCI_REG(0x20) #define LOONGSON_PCIEXPRBASE LOONGSON_PCI_REG(0x30) #define LOONGSON_PCIINT LOONGSON_PCI_REG(0x3c) @@ -132,7 +132,7 @@ static inline void do_perfcnt_IRQ(void) #define LOONGSON_PCICMD_MABORT_CLR 0x20000000 #define LOONGSON_PCICMD_MTABORT_CLR 0x10000000 #define LOONGSON_PCICMD_TABORT_CLR 0x08000000 -#define LOONGSON_PCICMD_MPERR_CLR 0x01000000 +#define LOONGSON_PCICMD_MPERR_CLR 0x01000000 #define LOONGSON_PCICMD_PERRRESPEN 0x00000040 #define LOONGSON_PCICMD_ASTEPEN 0x00000080 #define LOONGSON_PCICMD_SERREN 0x00000100 @@ -142,7 +142,7 @@ static inline void do_perfcnt_IRQ(void) /* Loongson h/w Configuration */ #define LOONGSON_GENCFG_OFFSET 0x4 -#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET) +#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET) #define LOONGSON_GENCFG_DEBUGMODE 0x00000001 #define LOONGSON_GENCFG_SNOOPEN 0x00000002 @@ -173,25 +173,25 @@ static inline void do_perfcnt_IRQ(void) /* GPIO Regs - r/w */ -#define LOONGSON_GPIODATA LOONGSON_REG(LOONGSON_REGBASE + 0x1c) +#define LOONGSON_GPIODATA LOONGSON_REG(LOONGSON_REGBASE + 0x1c) #define LOONGSON_GPIOIE LOONGSON_REG(LOONGSON_REGBASE + 0x20) /* ICU Configuration Regs - r/w */ #define LOONGSON_INTEDGE LOONGSON_REG(LOONGSON_REGBASE + 0x24) -#define LOONGSON_INTSTEER LOONGSON_REG(LOONGSON_REGBASE + 0x28) +#define LOONGSON_INTSTEER LOONGSON_REG(LOONGSON_REGBASE + 0x28) #define LOONGSON_INTPOL LOONGSON_REG(LOONGSON_REGBASE + 0x2c) /* ICU Enable Regs - IntEn & IntISR are r/o. */ -#define LOONGSON_INTENSET LOONGSON_REG(LOONGSON_REGBASE + 0x30) -#define LOONGSON_INTENCLR LOONGSON_REG(LOONGSON_REGBASE + 0x34) +#define LOONGSON_INTENSET LOONGSON_REG(LOONGSON_REGBASE + 0x30) +#define LOONGSON_INTENCLR LOONGSON_REG(LOONGSON_REGBASE + 0x34) #define LOONGSON_INTEN LOONGSON_REG(LOONGSON_REGBASE + 0x38) #define LOONGSON_INTISR LOONGSON_REG(LOONGSON_REGBASE + 0x3c) /* ICU */ #define LOONGSON_ICU_MBOXES 0x0000000f -#define LOONGSON_ICU_MBOXES_SHIFT 0 +#define LOONGSON_ICU_MBOXES_SHIFT 0 #define LOONGSON_ICU_DMARDY 0x00000010 #define LOONGSON_ICU_DMAEMPTY 0x00000020 #define LOONGSON_ICU_COPYRDY 0x00000040 @@ -212,10 +212,10 @@ static inline void do_perfcnt_IRQ(void) /* PCI prefetch window base & mask */ -#define LOONGSON_MEM_WIN_BASE_L LOONGSON_REG(LOONGSON_REGBASE + 0x40) -#define LOONGSON_MEM_WIN_BASE_H LOONGSON_REG(LOONGSON_REGBASE + 0x44) -#define LOONGSON_MEM_WIN_MASK_L LOONGSON_REG(LOONGSON_REGBASE + 0x48) -#define LOONGSON_MEM_WIN_MASK_H LOONGSON_REG(LOONGSON_REGBASE + 0x4c) +#define LOONGSON_MEM_WIN_BASE_L LOONGSON_REG(LOONGSON_REGBASE + 0x40) +#define LOONGSON_MEM_WIN_BASE_H LOONGSON_REG(LOONGSON_REGBASE + 0x44) +#define LOONGSON_MEM_WIN_MASK_L LOONGSON_REG(LOONGSON_REGBASE + 0x48) +#define LOONGSON_MEM_WIN_MASK_H LOONGSON_REG(LOONGSON_REGBASE + 0x4c) /* PCI_Hit*_Sel_* */ diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h index 4321338..3810d5c 100644 --- a/arch/mips/include/asm/mach-loongson/machine.h +++ b/arch/mips/include/asm/mach-loongson/machine.h @@ -2,8 +2,8 @@ * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin <wuzhangjin@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h index 3b23ee8..f4a36d7 100644 --- a/arch/mips/include/asm/mach-loongson/mem.h +++ b/arch/mips/include/asm/mach-loongson/mem.h @@ -2,8 +2,8 @@ * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin <wuzhangjin@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/include/asm/mach-loongson1/irq.h b/arch/mips/include/asm/mach-loongson1/irq.h index da96ed4..96bfb1c 100644 --- a/arch/mips/include/asm/mach-loongson1/irq.h +++ b/arch/mips/include/asm/mach-loongson1/irq.h @@ -3,8 +3,8 @@ * * IRQ mappings for Loongson 1 * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h b/arch/mips/include/asm/mach-loongson1/loongson1.h index 4e18e88..5c437c2 100644 --- a/arch/mips/include/asm/mach-loongson1/loongson1.h +++ b/arch/mips/include/asm/mach-loongson1/loongson1.h @@ -3,8 +3,8 @@ * * Register mappings for Loongson 1 * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/include/asm/mach-loongson1/platform.h b/arch/mips/include/asm/mach-loongson1/platform.h index 718a122..30c13e5 100644 --- a/arch/mips/include/asm/mach-loongson1/platform.h +++ b/arch/mips/include/asm/mach-loongson1/platform.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/include/asm/mach-loongson1/prom.h b/arch/mips/include/asm/mach-loongson1/prom.h index b871dc4..34859a4 100644 --- a/arch/mips/include/asm/mach-loongson1/prom.h +++ b/arch/mips/include/asm/mach-loongson1/prom.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h b/arch/mips/include/asm/mach-loongson1/regs-clk.h index a81fa3d..fb6a3ff 100644 --- a/arch/mips/include/asm/mach-loongson1/regs-clk.h +++ b/arch/mips/include/asm/mach-loongson1/regs-clk.h @@ -3,8 +3,8 @@ * * Loongson 1 Clock Register Definitions. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h b/arch/mips/include/asm/mach-loongson1/regs-wdt.h index f897de6..6574568 100644 --- a/arch/mips/include/asm/mach-loongson1/regs-wdt.h +++ b/arch/mips/include/asm/mach-loongson1/regs-wdt.h @@ -3,8 +3,8 @@ * * Loongson 1 watchdog register definitions. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h index 37e3583..de3b66a 100644 --- a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h @@ -23,8 +23,8 @@ /* #define cpu_has_watch ? */ #define cpu_has_divec 1 #define cpu_has_vce 0 -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ /* #define cpu_has_prefetch ? */ #define cpu_has_mcheck 1 /* #define cpu_has_ejtag ? */ @@ -50,8 +50,8 @@ /* #define cpu_has_watch ? */ #define cpu_has_divec 1 #define cpu_has_vce 0 -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ /* #define cpu_has_prefetch ? */ #define cpu_has_mcheck 1 /* #define cpu_has_ejtag ? */ diff --git a/arch/mips/include/asm/mach-malta/irq.h b/arch/mips/include/asm/mach-malta/irq.h index 9b9da26..47cfe64 100644 --- a/arch/mips/include/asm/mach-malta/irq.h +++ b/arch/mips/include/asm/mach-malta/irq.h @@ -2,7 +2,7 @@ #define __ASM_MACH_MIPS_IRQ_H -#define NR_IRQS 256 +#define NR_IRQS 256 #include_next <irq.h> diff --git a/arch/mips/include/asm/mach-malta/mach-gt64120.h b/arch/mips/include/asm/mach-malta/mach-gt64120.h index 0f86314..62a4b288 100644 --- a/arch/mips/include/asm/mach-malta/mach-gt64120.h +++ b/arch/mips/include/asm/mach-malta/mach-gt64120.h @@ -1,6 +1,6 @@ /* * This is a direct copy of the ev96100.h file, with a global - * search and replace. The numbers are the same. + * search and replace. The numbers are the same. * * The reason I'm duplicating this is so that the 64120/96100 * defines won't be confusing in the source code. diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h index 016fa94..016fa94 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h b/arch/mips/include/asm/mach-pmcs-msp71xx/gpio.h index ebdbab9..ebdbab9 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/gpio.h diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h index c84bcf9..ac863e2 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h @@ -43,14 +43,14 @@ * IRQs directly forwarded to the CPU */ #define MSP_MIPS_INTBASE 0 -#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ -#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ -#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ -#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ -#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */ -#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */ -#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */ -#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */ +#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ +#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ +#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ +#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ +#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */ +#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */ +#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */ +#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */ /* * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) @@ -59,93 +59,93 @@ */ #define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8) #define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0) - /* External interrupt 0 */ + /* External interrupt 0 */ #define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1) - /* External interrupt 1 */ + /* External interrupt 1 */ #define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2) - /* External interrupt 2 */ + /* External interrupt 2 */ #define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3) - /* External interrupt 3 */ + /* External interrupt 3 */ #define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4) - /* CPU interface interrupt */ + /* CPU interface interrupt */ #define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5) - /* External interrupt 4 */ + /* External interrupt 4 */ #define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6) - /* Cascaded IRQ for USB */ + /* Cascaded IRQ for USB */ #define MSP_INT_MBOX (MSP_CIC_INTBASE + 7) - /* Sec engine mailbox IRQ */ + /* Sec engine mailbox IRQ */ #define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8) - /* External interrupt 5 */ + /* External interrupt 5 */ #define MSP_INT_TDM (MSP_CIC_INTBASE + 9) - /* TDM interrupt */ + /* TDM interrupt */ #define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10) - /* Cascaded IRQ for MAC 0 */ + /* Cascaded IRQ for MAC 0 */ #define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11) - /* Cascaded IRQ for MAC 1 */ + /* Cascaded IRQ for MAC 1 */ #define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12) - /* Cascaded IRQ for sec engine */ -#define MSP_INT_PER (MSP_CIC_INTBASE + 13) - /* Peripheral interrupt */ -#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14) - /* SLP timer 0 */ -#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15) - /* SLP timer 1 */ -#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16) - /* SLP timer 2 */ -#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17) - /* VPE0 MIPS timer */ + /* Cascaded IRQ for sec engine */ +#define MSP_INT_PER (MSP_CIC_INTBASE + 13) + /* Peripheral interrupt */ +#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14) + /* SLP timer 0 */ +#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15) + /* SLP timer 1 */ +#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16) + /* SLP timer 2 */ +#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17) + /* VPE0 MIPS timer */ #define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18) - /* Block Copy */ + /* Block Copy */ #define MSP_INT_UART0 (MSP_CIC_INTBASE + 19) - /* UART 0 */ + /* UART 0 */ #define MSP_INT_PCI (MSP_CIC_INTBASE + 20) - /* PCI subsystem */ + /* PCI subsystem */ #define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21) - /* External interrupt 5 */ + /* External interrupt 5 */ #define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22) - /* PCI Message Signal */ + /* PCI Message Signal */ #define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23) - /* Cascaded ADSL2+ SAR IRQ */ + /* Cascaded ADSL2+ SAR IRQ */ #define MSP_INT_DSL (MSP_CIC_INTBASE + 24) - /* ADSL2+ IRQ */ + /* ADSL2+ IRQ */ #define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25) - /* SLP error condition */ + /* SLP error condition */ #define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26) - /* VPE1 MIPS timer */ + /* VPE1 MIPS timer */ #define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27) - /* VPE0 Performance counter */ + /* VPE0 Performance counter */ #define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28) - /* VPE1 Performance counter */ + /* VPE1 Performance counter */ #define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29) - /* External interrupt 5 */ + /* External interrupt 5 */ #define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30) - /* VPE0 Software interrupt */ + /* VPE0 Software interrupt */ #define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31) - /* VPE0 Software interrupt */ + /* VPE0 Software interrupt */ /* * IRQs cascaded on CIC PER interrupt (MSP_INT_PER) */ #define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32) -/* Reserved 0-1 */ +/* Reserved 0-1 */ #define MSP_INT_UART1 (MSP_PER_INTBASE + 2) - /* UART 1 */ -/* Reserved 3-5 */ + /* UART 1 */ +/* Reserved 3-5 */ #define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) - /* 2-wire */ + /* 2-wire */ #define MSP_INT_TM0 (MSP_PER_INTBASE + 7) /* Peripheral timer block out 0 */ #define MSP_INT_TM1 (MSP_PER_INTBASE + 8) /* Peripheral timer block out 1 */ -/* Reserved 9 */ +/* Reserved 9 */ #define MSP_INT_SPRX (MSP_PER_INTBASE + 10) - /* SPI RX complete */ + /* SPI RX complete */ #define MSP_INT_SPTX (MSP_PER_INTBASE + 11) - /* SPI TX complete */ + /* SPI TX complete */ #define MSP_INT_GPIO (MSP_PER_INTBASE + 12) - /* GPIO */ + /* GPIO */ #define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) - /* Peripheral error */ -/* Reserved 14-31 */ + /* Peripheral error */ +/* Reserved 14-31 */ #endif /* !_MSP_CIC_INT_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h index 156f320..daacebb 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h @@ -54,7 +54,7 @@ enum msp_gpio_mode { MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */ MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */ MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */ - MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */ + MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */ }; /* -- Static Tables -- */ @@ -148,7 +148,7 @@ static unsigned int MSP_GPIO_MODE_ALLOWED[] = { BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio)) #define BASIC_MODE_SHIFT(gpio) \ BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio)) -#define BASIC_MODE_FROM_REG(data, gpio) \ +#define BASIC_MODE_FROM_REG(data, gpio) \ BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio)) /* diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h index 1d9f054..29f8bf7 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h @@ -1,7 +1,7 @@ /* * Defines for the MSP interrupt handlers. * - * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved. + * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved. * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com * * ######################################################################## @@ -28,7 +28,7 @@ /* * The PMC-Sierra MSP product line has at least two different interrupt * controllers, the SLP register based scheme and the CIC interrupt - * controller block mechanism. This file distinguishes between them + * controller block mechanism. This file distinguishes between them * so that devices see a uniform interface. */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h index 4156069..24948cc 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h @@ -26,7 +26,7 @@ #ifndef _MSP_PCI_H_ #define _MSP_PCI_H_ -#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) +#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) /* * It is convenient to program the OATRAN register so that @@ -96,24 +96,24 @@ enum config_status_command, /* 1 */ config_class_revision, /* 2 */ config_BIST_header_latency_cache, /* 3 */ - config_BAR0, /* 4 */ - config_BAR1, /* 5 */ - config_BAR2, /* 6 */ - config_not_used7, /* 7 */ - config_not_used8, /* 8 */ - config_not_used9, /* 9 */ - config_CIS, /* 10 */ - config_subsystem, /* 11 */ - config_not_used12, /* 12 */ + config_BAR0, /* 4 */ + config_BAR1, /* 5 */ + config_BAR2, /* 6 */ + config_not_used7, /* 7 */ + config_not_used8, /* 8 */ + config_not_used9, /* 9 */ + config_CIS, /* 10 */ + config_subsystem, /* 11 */ + config_not_used12, /* 12 */ config_capabilities, /* 13 */ - config_not_used14, /* 14 */ + config_not_used14, /* 14 */ config_lat_grant_irq, /* 15 */ config_message_control,/* 16 */ config_message_addr, /* 17 */ config_message_data, /* 18 */ - config_VPD_addr, /* 19 */ - config_VPD_data, /* 20 */ - config_maxregs /* 21 - number of registers */ + config_VPD_addr, /* 19 */ + config_VPD_data, /* 20 */ + config_maxregs /* 21 - number of registers */ }; struct msp_pci_regs @@ -132,15 +132,15 @@ struct msp_pci_regs pcireg hop_unused_2C; /* +0x2C */ pcireg hop_unused_30; /* +0x30 */ pcireg hop_unused_34; /* +0x34 */ - pcireg if_control; /* +0x38 */ - pcireg oatran; /* +0x3C */ - pcireg reset_ctl; /* +0x40 */ - pcireg config_addr; /* +0x44 */ + pcireg if_control; /* +0x38 */ + pcireg oatran; /* +0x3C */ + pcireg reset_ctl; /* +0x40 */ + pcireg config_addr; /* +0x44 */ pcireg hop_unused_48; /* +0x48 */ pcireg msg_signaled_int_status; /* +0x4C */ pcireg msg_signaled_int_mask; /* +0x50 */ - pcireg if_status; /* +0x54 */ - pcireg if_mask; /* +0x58 */ + pcireg if_status; /* +0x54 */ + pcireg if_mask; /* +0x58 */ pcireg hop_unused_5C; /* +0x5C */ pcireg hop_unused_60; /* +0x60 */ pcireg hop_unused_64; /* +0x64 */ @@ -190,9 +190,9 @@ struct msp_pci_regs #define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */ #define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */ -#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ -#define BPCI_RESETCTL_RT (1<<4) /* Release time */ -#define BPCI_RESETCTL_CT (1<<8) /* Config time */ +#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ +#define BPCI_RESETCTL_RT (1<<4) /* Release time */ +#define BPCI_RESETCTL_CT (1<<8) /* Config time */ #define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */ #define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */ #define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h index 786d82d..4d3052a 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h @@ -40,7 +40,7 @@ (((revision >= 0xb0) && (revision < 0xd0))) #define FPGA_IS_5000(revision) \ ((revision >= 0x80) && (revision <= 0x90)) -#define FPGA_IS_ZEUS(revision) ((revision < 0x7f)) +#define FPGA_IS_ZEUS(revision) ((revision < 0x7f)) #define FPGA_IS_DUET(revision) \ (((revision >= 0xa0) && (revision < 0xb0))) #define FPGA_IS_MSP4200(revision) ((revision >= 0xd0)) @@ -48,7 +48,7 @@ #define MACHINE_TYPE_POLO "POLO" #define MACHINE_TYPE_DUET "DUET" -#define MACHINE_TYPE_ZEUS "ZEUS" +#define MACHINE_TYPE_ZEUS "ZEUS" #define MACHINE_TYPE_MSP2000REVB "MSP2000REVB" #define MACHINE_TYPE_MSP5000 "MSP5000" #define MACHINE_TYPE_MSP4200 "MSP4200" @@ -58,7 +58,7 @@ #define MACHINE_TYPE_POLO_FPGA "POLO-FPGA" #define MACHINE_TYPE_DUET_FPGA "DUET-FPGA" -#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA" +#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA" #define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA" #define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA" #define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA" @@ -95,7 +95,7 @@ #define ENET_MII 'M' #define ENET_RMII 'R' -#define ENETTXD_FALLING 'F' +#define ENETTXD_FALLING 'F' #define ENETTXD_RISING 'R' #define PCI_HOST 'H' diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h index 7d41474..2dbc7a8 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h @@ -233,4 +233,4 @@ static inline u32 blocking_read_reg32(volatile u32 *const addr) : "=&r" (tmp), "=m" (*address) \ : "0" (tmp), "m" (*address)) -#endif /* __ASM_REGOPS_H__ */ +#endif /* __ASM_REGOPS_H__ */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h index 692c1b6..da3a8de 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h @@ -37,13 +37,13 @@ /* ######################################################################## - # Address space and device base definitions # + # Address space and device base definitions # ######################################################################## */ /* *************************************************************************** - * System Logic and Peripherals (ELB, UART0, etc) device address space * + * System Logic and Peripherals (ELB, UART0, etc) device address space * *************************************************************************** */ #define MSP_SLP_BASE 0x1c000000 @@ -53,69 +53,69 @@ #define MSP_RST_SIZE 0x0C /* System reset register space */ #define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C) - /* watchdog timer base */ + /* watchdog timer base */ #define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054) - /* internal timer base */ + /* internal timer base */ #define MSP_UART0_BASE (MSP_SLP_BASE + 0x100) - /* UART0 controller base */ + /* UART0 controller base */ #define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120) - /* Block Copy controller base */ + /* Block Copy controller base */ #define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160) - /* Block Copy descriptor base */ + /* Block Copy descriptor base */ /* *************************************************************************** - * PCI address space * + * PCI address space * *************************************************************************** */ #define MSP_PCI_BASE 0x19000000 /* *************************************************************************** - * MSbus device address space * + * MSbus device address space * *************************************************************************** */ #define MSP_MSB_BASE 0x18000000 - /* MSbus address start */ + /* MSbus address start */ #define MSP_PER_BASE (MSP_MSB_BASE + 0x400000) - /* Peripheral device registers */ + /* Peripheral device registers */ #define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000) - /* MAC A device registers */ + /* MAC A device registers */ #define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000) - /* MAC B device registers */ + /* MAC B device registers */ #define MSP_MAC_SIZE 0xE0 /* MAC register space */ #define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000) - /* Security Engine registers */ + /* Security Engine registers */ #define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000) - /* MAC C device registers */ + /* MAC C device registers */ #define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000) - /* ADSL2 device registers */ + /* ADSL2 device registers */ #define MSP_USB0_BASE (MSP_MSB_BASE + 0xB00000) - /* USB0 device registers */ + /* USB0 device registers */ #define MSP_USB1_BASE (MSP_MSB_BASE + 0x300000) /* USB1 device registers */ #define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000) - /* CPU interface registers */ + /* CPU interface registers */ /* Devices within the MSbus peripheral block */ #define MSP_UART1_BASE (MSP_PER_BASE + 0x030) - /* UART1 controller base */ + /* UART1 controller base */ #define MSP_SPI_BASE (MSP_PER_BASE + 0x058) - /* SPI/MPI control registers */ + /* SPI/MPI control registers */ #define MSP_TWI_BASE (MSP_PER_BASE + 0x090) - /* Two-wire control registers */ + /* Two-wire control registers */ #define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0) - /* Programmable timer control */ + /* Programmable timer control */ /* *************************************************************************** - * Physical Memory configuration address space * + * Physical Memory configuration address space * *************************************************************************** */ #define MSP_MEM_CFG_BASE 0x17f00000 -#define MSP_MEM_INDIRECT_CTL_10 0x10 +#define MSP_MEM_INDIRECT_CTL_10 0x10 /* * Notes: @@ -130,10 +130,10 @@ * 3) These constants are for physical addresses which means that they * work correctly with "ioremap" and friends. This means that device * drivers will need to remap these addresses using ioremap and perhaps - * the readw/writew macros. Or they could use the regptr() macro + * the readw/writew macros. Or they could use the regptr() macro * defined below, but the readw/writew calls are the correct thing. * 4) The UARTs have an additional status register offset from the base - * address. This register isn't used in the standard 8250 driver but + * address. This register isn't used in the standard 8250 driver but * may be used in other software. Consult the hardware datasheet for * offset details. * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers @@ -163,44 +163,44 @@ /* *************************************************************************** - * System Logic and Peripherals (RESET, ELB, etc) registers * + * System Logic and Peripherals (RESET, ELB, etc) registers * *************************************************************************** */ /* System Control register definitions */ -#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00) - /* Device-ID RO */ -#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04) - /* Firmware-ID Register RW */ -#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08) - /* System-ID Register-0 RW */ -#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C) - /* System-ID Register-1 RW */ +#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00) + /* Device-ID RO */ +#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04) + /* Firmware-ID Register RW */ +#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08) + /* System-ID Register-0 RW */ +#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C) + /* System-ID Register-1 RW */ /* System Reset register definitions */ -#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10) - /* System Reset Status RO */ -#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14) - /* System Set Reset WO */ -#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18) - /* System Clear Reset WO */ +#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10) + /* System Reset Status RO */ +#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14) + /* System Set Reset WO */ +#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18) + /* System Clear Reset WO */ /* System Clock Registers */ #define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C) - /* PCI clock generator RW */ + /* PCI clock generator RW */ #define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20) - /* UART clock generator RW */ -/* reserved (MSP_SLP_BASE + 0x24) */ -/* reserved (MSP_SLP_BASE + 0x28) */ + /* UART clock generator RW */ +/* reserved (MSP_SLP_BASE + 0x24) */ +/* reserved (MSP_SLP_BASE + 0x28) */ #define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C) - /* PLL1 clock generator RW */ + /* PLL1 clock generator RW */ #define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30) - /* PLL0 clock generator RW */ + /* PLL0 clock generator RW */ #define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34) - /* MIPS clock generator RW */ -#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38) + /* MIPS clock generator RW */ +#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38) /* Voice Eng clock generator RW */ -/* reserved (MSP_SLP_BASE + 0x3C) */ +/* reserved (MSP_SLP_BASE + 0x3C) */ #define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40) /* MS-Bus clock generator RW */ #define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44) @@ -216,108 +216,108 @@ #define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78) /* Security Engine mailbox RW */ #define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C) - /* Voice Engine mailbox RW */ + /* Voice Engine mailbox RW */ /* ELB Controller Registers */ #define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80) - /* ELB CS0 Configuration Reg */ + /* ELB CS0 Configuration Reg */ #define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84) - /* ELB CS0 Base Address Reg */ + /* ELB CS0 Base Address Reg */ #define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88) - /* ELB CS0 Mask Register */ + /* ELB CS0 Mask Register */ #define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C) - /* ELB CS0 access register */ + /* ELB CS0 access register */ #define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90) - /* ELB CS1 Configuration Reg */ + /* ELB CS1 Configuration Reg */ #define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94) - /* ELB CS1 Base Address Reg */ + /* ELB CS1 Base Address Reg */ #define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98) - /* ELB CS1 Mask Register */ + /* ELB CS1 Mask Register */ #define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C) - /* ELB CS1 access register */ + /* ELB CS1 access register */ #define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0) - /* ELB CS2 Configuration Reg */ + /* ELB CS2 Configuration Reg */ #define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4) - /* ELB CS2 Base Address Reg */ + /* ELB CS2 Base Address Reg */ #define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8) - /* ELB CS2 Mask Register */ + /* ELB CS2 Mask Register */ #define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC) - /* ELB CS2 access register */ + /* ELB CS2 access register */ #define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0) - /* ELB CS3 Configuration Reg */ + /* ELB CS3 Configuration Reg */ #define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4) - /* ELB CS3 Base Address Reg */ + /* ELB CS3 Base Address Reg */ #define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8) - /* ELB CS3 Mask Register */ + /* ELB CS3 Mask Register */ #define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC) - /* ELB CS3 access register */ + /* ELB CS3 access register */ #define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0) - /* ELB CS4 Configuration Reg */ + /* ELB CS4 Configuration Reg */ #define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4) - /* ELB CS4 Base Address Reg */ + /* ELB CS4 Base Address Reg */ #define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8) - /* ELB CS4 Mask Register */ + /* ELB CS4 Mask Register */ #define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC) - /* ELB CS4 access register */ + /* ELB CS4 access register */ #define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0) - /* ELB CS5 Configuration Reg */ + /* ELB CS5 Configuration Reg */ #define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4) - /* ELB CS5 Base Address Reg */ + /* ELB CS5 Base Address Reg */ #define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8) - /* ELB CS5 Mask Register */ + /* ELB CS5 Mask Register */ #define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC) - /* ELB CS5 access register */ + /* ELB CS5 access register */ -/* reserved 0xE0 - 0xE8 */ +/* reserved 0xE0 - 0xE8 */ #define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC) - /* ELB single PC card detect */ + /* ELB single PC card detect */ -/* reserved 0xF0 - 0xF8 */ -#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC) - /* SDRAM read/ELB timing Reg */ +/* reserved 0xF0 - 0xF8 */ +#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC) + /* SDRAM read/ELB timing Reg */ /* Extended UART status registers */ #define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0) - /* UART Status Register 0 */ + /* UART Status Register 0 */ #define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170) - /* UART Status Register 1 */ + /* UART Status Register 1 */ /* Performance monitoring registers */ #define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140) - /* Performance monitor control */ + /* Performance monitor control */ #define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144) - /* Performance monitor clear */ + /* Performance monitor clear */ #define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148) - /* Perf monitor counter high */ + /* Perf monitor counter high */ #define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C) - /* Perf monitor counter low */ + /* Perf monitor counter low */ /* System control registers */ #define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150) - /* System control register */ + /* System control register */ #define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154) - /* System Error status 1 */ + /* System Error status 1 */ #define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158) - /* System Error status 2 */ + /* System Error status 2 */ #define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C) - /* System Interrupt config */ + /* System Interrupt config */ /* Voice Engine Memory configuration */ #define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C) - /* Voice engine memory config */ + /* Voice engine memory config */ /* CPU/SLP Error Status registers */ #define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180) - /* CPU/SLP Error status 1 */ + /* CPU/SLP Error status 1 */ #define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184) - /* CPU/SLP Error status 1 */ + /* CPU/SLP Error status 1 */ -/* Extended GPIO registers */ +/* Extended GPIO registers */ #define EXTENDED_GPIO1_REG regptr(MSP_SLP_BASE + 0x188) #define EXTENDED_GPIO2_REG regptr(MSP_SLP_BASE + 0x18c) #define EXTENDED_GPIO_REG EXTENDED_GPIO1_REG @@ -325,182 +325,182 @@ /* System Error registers */ #define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190) - /* Int status for SLP errors */ + /* Int status for SLP errors */ #define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194) - /* Int mask for SLP errors */ + /* Int mask for SLP errors */ #define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198) - /* External ELB reset */ + /* External ELB reset */ #define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C) - /* Boot Status */ + /* Boot Status */ /* Extended ELB addressing */ #define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0) - /* CS0 Extended address */ + /* CS0 Extended address */ #define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4) - /* CS1 Extended address */ + /* CS1 Extended address */ #define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8) - /* CS2 Extended address */ + /* CS2 Extended address */ #define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC) - /* CS3 Extended address */ -/* reserved 0x1B0 */ + /* CS3 Extended address */ +/* reserved 0x1B0 */ #define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4) - /* CS5 Extended address */ + /* CS5 Extended address */ /* PLL Adjustment registers */ #define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200) - /* PLL0 lock status */ + /* PLL0 lock status */ #define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204) - /* PLL Analog reset status */ + /* PLL Analog reset status */ #define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208) - /* PLL0 Adjustment value */ + /* PLL0 Adjustment value */ #define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C) - /* PLL1 Adjustment value */ + /* PLL1 Adjustment value */ /* *************************************************************************** - * Peripheral Register definitions * + * Peripheral Register definitions * *************************************************************************** */ /* Peripheral status */ #define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50) - /* Peripheral control register */ + /* Peripheral control register */ #define PER_STS_REG regptr(MSP_PER_BASE + 0x54) - /* Peripheral status register */ + /* Peripheral status register */ /* SPI/MPI Registers */ #define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58) - /* SPI/MPI Tx Size register */ + /* SPI/MPI Tx Size register */ #define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C) - /* SPI/MPI Rx Size register */ + /* SPI/MPI Rx Size register */ #define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60) - /* SPI/MPI Control register */ + /* SPI/MPI Control register */ #define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64) - /* SPI/MPI Chip Select reg */ + /* SPI/MPI Chip Select reg */ #define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0) - /* SPI/MPI Core Data reg */ + /* SPI/MPI Core Data reg */ #define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4) - /* SPI/MPI Core Control reg */ + /* SPI/MPI Core Control reg */ #define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8) - /* SPI/MPI Core Status reg */ + /* SPI/MPI Core Status reg */ #define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC) - /* SPI/MPI Core Ssel reg */ + /* SPI/MPI Core Ssel reg */ #define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0) - /* SPI/MPI Data FIFO reg */ + /* SPI/MPI Data FIFO reg */ -/* Peripheral Block Error Registers */ +/* Peripheral Block Error Registers */ #define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70) - /* Error Bit Status Register */ + /* Error Bit Status Register */ #define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74) - /* Error Bit Mask Register */ + /* Error Bit Mask Register */ #define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78) - /* Error Header 1 Register */ + /* Error Header 1 Register */ #define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C) - /* Error Header 2 Register */ + /* Error Header 2 Register */ -/* Peripheral Block Interrupt Registers */ +/* Peripheral Block Interrupt Registers */ #define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80) - /* Interrupt status register */ + /* Interrupt status register */ #define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84) - /* Interrupt Mask Register */ + /* Interrupt Mask Register */ #define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88) - /* GPIO interrupt status reg */ + /* GPIO interrupt status reg */ #define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C) - /* GPIO interrupt MASK Reg */ + /* GPIO interrupt MASK Reg */ -/* POLO GPIO registers */ +/* POLO GPIO registers */ #define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0) - /* Polo GPIO[8:0] data reg */ + /* Polo GPIO[8:0] data reg */ #define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4) - /* Polo GPIO[7:0] config reg */ + /* Polo GPIO[7:0] config reg */ #define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8) - /* Polo GPIO[15:8] config reg */ + /* Polo GPIO[15:8] config reg */ #define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC) /* Polo GPIO[31:0] output drive */ #define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170) - /* Polo GPIO[23:16] config reg */ + /* Polo GPIO[23:16] config reg */ #define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174) - /* Polo GPIO[15:9] data reg */ + /* Polo GPIO[15:9] data reg */ #define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178) - /* Polo GPIO[23:16] data reg */ + /* Polo GPIO[23:16] data reg */ #define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C) - /* Polo GPIO[31:24] data reg */ + /* Polo GPIO[31:24] data reg */ #define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180) - /* Polo GPIO[39:32] data reg */ + /* Polo GPIO[39:32] data reg */ #define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184) - /* Polo GPIO[47:40] data reg */ + /* Polo GPIO[47:40] data reg */ #define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188) - /* Polo GPIO[54:48] data reg */ + /* Polo GPIO[54:48] data reg */ #define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) - /* Polo GPIO[31:24] config reg */ + /* Polo GPIO[31:24] config reg */ #define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190) - /* Polo GPIO[39:32] config reg */ + /* Polo GPIO[39:32] config reg */ #define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194) - /* Polo GPIO[47:40] config reg */ + /* Polo GPIO[47:40] config reg */ #define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198) - /* Polo GPIO[54:48] config reg */ + /* Polo GPIO[54:48] config reg */ #define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C) /* Polo GPIO[54:32] output drive */ -/* Generic GPIO registers */ +/* Generic GPIO registers */ #define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170) - /* GPIO[1:0] data register */ + /* GPIO[1:0] data register */ #define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174) - /* GPIO[5:2] data register */ + /* GPIO[5:2] data register */ #define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178) - /* GPIO[9:6] data register */ + /* GPIO[9:6] data register */ #define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C) - /* GPIO[15:10] data register */ + /* GPIO[15:10] data register */ #define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180) - /* GPIO[1:0] config register */ + /* GPIO[1:0] config register */ #define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184) - /* GPIO[5:2] config register */ + /* GPIO[5:2] config register */ #define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188) - /* GPIO[9:6] config register */ + /* GPIO[9:6] config register */ #define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) - /* GPIO[15:10] config register */ + /* GPIO[15:10] config register */ #define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190) - /* GPIO[15:0] output drive */ + /* GPIO[15:0] output drive */ /* *************************************************************************** - * CPU Interface register definitions * + * CPU Interface register definitions * *************************************************************************** */ #define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00) /* PCI-SDRAM queue flush trigger */ #define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04) - /* OCP Error Attribute 1 */ + /* OCP Error Attribute 1 */ #define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08) - /* OCP Error Attribute 2 */ + /* OCP Error Attribute 2 */ #define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C) - /* OCP Error Status */ + /* OCP Error Status */ #define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10) - /* CPU policy configuration */ + /* CPU policy configuration */ #define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10) - /* Misc configuration options */ + /* Misc configuration options */ /* Central Interrupt Controller Registers */ #define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000) - /* Central Interrupt registers */ + /* Central Interrupt registers */ #define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00) - /* External interrupt config */ + /* External interrupt config */ #define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04) - /* CIC Interrupt Status */ + /* CIC Interrupt Status */ #define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08) - /* VPE0 Interrupt Mask */ + /* VPE0 Interrupt Mask */ #define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C) - /* VPE1 Interrupt Mask */ + /* VPE1 Interrupt Mask */ #define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10) - /* Thread Context 0 Int Mask */ + /* Thread Context 0 Int Mask */ #define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14) - /* Thread Context 1 Int Mask */ + /* Thread Context 1 Int Mask */ #define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 2 Int Mask */ + /* Thread Context 2 Int Mask */ #define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 3 Int Mask */ + /* Thread Context 3 Int Mask */ #define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 4 Int Mask */ + /* Thread Context 4 Int Mask */ #define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18) #define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18) #define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18) @@ -509,7 +509,7 @@ /* *************************************************************************** - * Memory controller registers * + * Memory controller registers * *************************************************************************** */ #define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00) @@ -519,7 +519,7 @@ /* *************************************************************************** - * PCI controller registers * + * PCI controller registers * *************************************************************************** */ #define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00) @@ -528,25 +528,25 @@ /* ######################################################################## - # Register content & macro definitions # + # Register content & macro definitions # ######################################################################## */ /* *************************************************************************** - * DEV_ID defines * + * DEV_ID defines * *************************************************************************** */ -#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */ -#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */ -#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */ -#define DEV_ID_FAMILY (0xff << 8) /* family ID code */ -#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */ +#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */ +#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */ +#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */ +#define DEV_ID_FAMILY (0xff << 8) /* family ID code */ +#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */ -#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */ +#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */ #define MSP5000_ID (0x50 << 8) -#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */ -#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */ +#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */ +#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */ #define MSP4200_ID (0x42 << 8) #define MSP4000_ID (0x40 << 8) #define MSP2XXX_ID (0x20 << 8) @@ -563,27 +563,27 @@ /* *************************************************************************** - * RESET defines * + * RESET defines * *************************************************************************** */ -#define MSP_GR_RST (0x01 << 0) /* Global reset bit */ -#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */ -#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */ -#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */ -/* reserved */ -#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */ -#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */ -#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */ -#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */ -#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */ -#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */ -#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */ -#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */ -#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */ +#define MSP_GR_RST (0x01 << 0) /* Global reset bit */ +#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */ +#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */ +#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */ +/* reserved */ +#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */ +#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */ +#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */ +#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */ +#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */ +#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */ +#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */ +#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */ +#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */ /* *************************************************************************** - * UART defines * + * UART defines * *************************************************************************** */ #define MSP_BASE_BAUD 25000000 @@ -591,15 +591,15 @@ /* *************************************************************************** - * ELB defines * + * ELB defines * *************************************************************************** */ -#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */ -#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */ +#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */ +#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */ /* *************************************************************************** - * CIC defines * + * CIC defines * *************************************************************************** */ @@ -625,7 +625,7 @@ /* *************************************************************************** - * Memory Controller defines * + * Memory Controller defines * *************************************************************************** */ @@ -644,17 +644,17 @@ /* *************************************************************************** - * SPI/MPI Mode * + * SPI/MPI Mode * *************************************************************************** */ #define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */ -#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */ +#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */ #define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */ -#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */ +#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */ /* *************************************************************************** - * SPI/MPI Control Register * + * SPI/MPI Control Register * *************************************************************************** */ #define SPI_MPI_RX_START 0x00000004 /* Start receive command */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h index 96d4c8c..51a66dc 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h @@ -27,9 +27,9 @@ /* * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded - * hierarchical system. The first level are the direct MIPS interrupts + * hierarchical system. The first level are the direct MIPS interrupts * and are assigned the interrupt range 0-7. The second level is the SLM - * interrupt controller and is assigned the range 8-39. The third level + * interrupt controller and is assigned the range 8-39. The third level * comprises the Peripherial block, the PCI block, the PCI MSI block and * the SLP. The PCI interrupts and the SLP errors are handled by the * relevant subsystems so the core interrupt code needs only concern @@ -41,11 +41,11 @@ * IRQs directly connected to CPU */ #define MSP_MIPS_INTBASE 0 -#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ -#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ -#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ -#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ -#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */ +#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ +#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ +#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ +#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ +#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */ #define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */ #define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */ #define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */ @@ -57,85 +57,85 @@ */ #define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8) #define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0) - /* External interrupt 0 */ + /* External interrupt 0 */ #define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1) - /* External interrupt 1 */ + /* External interrupt 1 */ #define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2) - /* External interrupt 2 */ + /* External interrupt 2 */ #define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3) - /* External interrupt 3 */ -/* Reserved 4-7 */ + /* External interrupt 3 */ +/* Reserved 4-7 */ /* ************************************************************************* * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER * - * Some MSP produces have this interrupt labelled as Voice and some are * - * SEC mbox ... * + * Some MSP produces have this interrupt labelled as Voice and some are * + * SEC mbox ... * ************************************************************************* */ #define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8) /* Cascaded IRQ for Voice Engine*/ #define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9) - /* TDM interrupt */ + /* TDM interrupt */ #define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10) - /* Cascaded IRQ for MAC 0 */ + /* Cascaded IRQ for MAC 0 */ #define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11) - /* Cascaded IRQ for MAC 1 */ + /* Cascaded IRQ for MAC 1 */ #define MSP_INT_SEC (MSP_SLP_INTBASE + 12) - /* IRQ for security engine */ -#define MSP_INT_PER (MSP_SLP_INTBASE + 13) - /* Peripheral interrupt */ -#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14) - /* SLP timer 0 */ -#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15) - /* SLP timer 1 */ -#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16) - /* SLP timer 2 */ -#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17) - /* Cascaded MIPS timer */ + /* IRQ for security engine */ +#define MSP_INT_PER (MSP_SLP_INTBASE + 13) + /* Peripheral interrupt */ +#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14) + /* SLP timer 0 */ +#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15) + /* SLP timer 1 */ +#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16) + /* SLP timer 2 */ +#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17) + /* Cascaded MIPS timer */ #define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18) - /* Block Copy */ + /* Block Copy */ #define MSP_INT_UART0 (MSP_SLP_INTBASE + 19) - /* UART 0 */ + /* UART 0 */ #define MSP_INT_PCI (MSP_SLP_INTBASE + 20) - /* PCI subsystem */ + /* PCI subsystem */ #define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21) - /* PCI doorbell */ + /* PCI doorbell */ #define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22) - /* PCI Message Signal */ + /* PCI Message Signal */ #define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23) - /* PCI Block Copy 0 */ + /* PCI Block Copy 0 */ #define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24) - /* PCI Block Copy 1 */ + /* PCI Block Copy 1 */ #define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25) - /* SLP error condition */ + /* SLP error condition */ #define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26) - /* IRQ for MAC2 */ -/* Reserved 26-31 */ + /* IRQ for MAC2 */ +/* Reserved 26-31 */ /* * IRQs cascaded on SLP PER interrupt (MSP_INT_PER) */ #define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32) -/* Reserved 0-1 */ +/* Reserved 0-1 */ #define MSP_INT_UART1 (MSP_PER_INTBASE + 2) - /* UART 1 */ -/* Reserved 3-5 */ + /* UART 1 */ +/* Reserved 3-5 */ #define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) - /* 2-wire */ + /* 2-wire */ #define MSP_INT_TM0 (MSP_PER_INTBASE + 7) /* Peripheral timer block out 0 */ #define MSP_INT_TM1 (MSP_PER_INTBASE + 8) /* Peripheral timer block out 1 */ -/* Reserved 9 */ +/* Reserved 9 */ #define MSP_INT_SPRX (MSP_PER_INTBASE + 10) - /* SPI RX complete */ + /* SPI RX complete */ #define MSP_INT_SPTX (MSP_PER_INTBASE + 11) - /* SPI TX complete */ + /* SPI TX complete */ #define MSP_INT_GPIO (MSP_PER_INTBASE + 12) - /* GPIO */ + /* GPIO */ #define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) - /* Peripheral error */ -/* Reserved 14-31 */ + /* Peripheral error */ +/* Reserved 14-31 */ #endif /* !_MSP_SLP_INT_H */ diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h index 4c9348d..aa45e6a 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h @@ -40,7 +40,7 @@ #define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF) /* Register spaces for USB host 1 */ -#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0) +#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0) #define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17) #define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000) #define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f) diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/mach-pmcs-msp71xx/war.h index c74eb16..a60bf9d 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h +++ b/arch/mips/include/asm/mach-pmcs-msp71xx/war.h @@ -21,9 +21,9 @@ #define R10000_LLSC_WAR 0 #if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \ defined(CONFIG_PMC_MSP7120_FPGA) -#define MIPS34K_MISSED_ITLB_WAR 1 +#define MIPS34K_MISSED_ITLB_WAR 1 #else -#define MIPS34K_MISSED_ITLB_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 #endif #endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */ diff --git a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h index 6d70264..daa85ce 100644 --- a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h +++ b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h @@ -42,15 +42,15 @@ #define PNX833X_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* Interrupts supported by PIC */ -#define PNX833X_PIC_I2C0_INT (PNX833X_PIC_IRQ_BASE + 1) -#define PNX833X_PIC_I2C1_INT (PNX833X_PIC_IRQ_BASE + 2) -#define PNX833X_PIC_UART0_INT (PNX833X_PIC_IRQ_BASE + 3) -#define PNX833X_PIC_UART1_INT (PNX833X_PIC_IRQ_BASE + 4) -#define PNX833X_PIC_TS_IN0_DV_INT (PNX833X_PIC_IRQ_BASE + 5) -#define PNX833X_PIC_TS_IN0_DMA_INT (PNX833X_PIC_IRQ_BASE + 6) -#define PNX833X_PIC_GPIO_INT (PNX833X_PIC_IRQ_BASE + 7) -#define PNX833X_PIC_AUDIO_DEC_INT (PNX833X_PIC_IRQ_BASE + 8) -#define PNX833X_PIC_VIDEO_DEC_INT (PNX833X_PIC_IRQ_BASE + 9) +#define PNX833X_PIC_I2C0_INT (PNX833X_PIC_IRQ_BASE + 1) +#define PNX833X_PIC_I2C1_INT (PNX833X_PIC_IRQ_BASE + 2) +#define PNX833X_PIC_UART0_INT (PNX833X_PIC_IRQ_BASE + 3) +#define PNX833X_PIC_UART1_INT (PNX833X_PIC_IRQ_BASE + 4) +#define PNX833X_PIC_TS_IN0_DV_INT (PNX833X_PIC_IRQ_BASE + 5) +#define PNX833X_PIC_TS_IN0_DMA_INT (PNX833X_PIC_IRQ_BASE + 6) +#define PNX833X_PIC_GPIO_INT (PNX833X_PIC_IRQ_BASE + 7) +#define PNX833X_PIC_AUDIO_DEC_INT (PNX833X_PIC_IRQ_BASE + 8) +#define PNX833X_PIC_VIDEO_DEC_INT (PNX833X_PIC_IRQ_BASE + 9) #define PNX833X_PIC_CONFIG_INT (PNX833X_PIC_IRQ_BASE + 10) #define PNX833X_PIC_AOI_INT (PNX833X_PIC_IRQ_BASE + 11) #define PNX833X_PIC_SYNC_INT (PNX833X_PIC_IRQ_BASE + 12) diff --git a/arch/mips/include/asm/mach-pnx833x/pnx833x.h b/arch/mips/include/asm/mach-pnx833x/pnx833x.h index 100f528..e6fc3a9 100644 --- a/arch/mips/include/asm/mach-pnx833x/pnx833x.h +++ b/arch/mips/include/asm/mach-pnx833x/pnx833x.h @@ -73,7 +73,7 @@ #define PNX833X_RESET_CONTROL PNX833X_REG(0x8004) -#define PNX833X_RESET_CONTROL_2 PNX833X_REG(0x8014) +#define PNX833X_RESET_CONTROL_2 PNX833X_REG(0x8014) #define PNX833X_PIC_REG(offs) PNX833X_REG(0x01000 + (offs)) #define PNX833X_PIC_INT_PRIORITY PNX833X_PIC_REG(0x0) @@ -82,10 +82,10 @@ #define PNX833X_PIC_INT_SRC_INT_SRC_SHIFT 3 #define PNX833X_PIC_INT_REG(irq) PNX833X_PIC_REG(0x10 + 4*(irq)) -#define PNX833X_CLOCK_CPUCP_CTL PNX833X_REG(0x9228) +#define PNX833X_CLOCK_CPUCP_CTL PNX833X_REG(0x9228) #define PNX833X_CLOCK_CPUCP_CTL_EXIT_RESET 0x00000002ul /* bit 1 */ #define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_MASK 0x00000018ul /* bits 4:3 */ -#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT 3 +#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT 3 #define PNX8335_CLOCK_PLL_CPU_CTL PNX833X_REG(0x9020) #define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_MASK 0x1f @@ -149,7 +149,7 @@ #define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_MASK (1 << 14) #define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_SHIFT 14 -#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK (1 << 7) +#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK (1 << 7) #define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_SHIFT 7 #define PNX833X_MIU_SEL0_BURST_PAGE_LEN_MASK (0xF << 9) @@ -160,10 +160,10 @@ #define PNX833X_MIU_CONFIG_SPI_OPCODE_MASK (0xFF << 3) #define PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT 3 -#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK (1 << 2) +#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK (1 << 2) #define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT 2 -#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK (1 << 1) +#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK (1 << 1) #define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT 1 #define PNX833X_MIU_CONFIG_SPI_SYNC_MASK (1 << 0) diff --git a/arch/mips/include/asm/mach-pnx8550/cm.h b/arch/mips/include/asm/mach-pnx8550/cm.h deleted file mode 100644 index bb0a56c..0000000 --- a/arch/mips/include/asm/mach-pnx8550/cm.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Clock module specific definitions - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -#ifndef __PNX8550_CM_H -#define __PNX8550_CM_H - -#define PNX8550_CM_BASE 0xBBE47000 - -#define PNX8550_CM_PLL0_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000) -#define PNX8550_CM_PLL1_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004) -#define PNX8550_CM_PLL2_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008) -#define PNX8550_CM_PLL3_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C) - -// Table not complete..... - -#define PNX8550_CM_PLL_BLOCKED_MASK 0x80000000 -#define PNX8550_CM_PLL_LOCK_MASK 0x40000000 -#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000 -#define PNX8550_CM_PLL_N_MASK 0x01ff0000 -#define PNX8550_CM_PLL_M_MASK 0x00003f00 -#define PNX8550_CM_PLL_P_MASK 0x0000000c -#define PNX8550_CM_PLL_PD_MASK 0x00000002 - - -#endif diff --git a/arch/mips/include/asm/mach-pnx8550/glb.h b/arch/mips/include/asm/mach-pnx8550/glb.h deleted file mode 100644 index 07aa85e..0000000 --- a/arch/mips/include/asm/mach-pnx8550/glb.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * PNX8550 global definitions - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -#ifndef __PNX8550_GLB_H -#define __PNX8550_GLB_H - -#define PNX8550_GLB1_BASE 0xBBE63000 -#define PNX8550_GLB2_BASE 0xBBE4d000 -#define PNX8550_RESET_BASE 0xBBE60000 - -/* PCI Inta Output Enable Registers */ -#define PNX8550_GLB2_ENAB_INTA_O *(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050) - -/* Bit 1:Enable DAC Powerdown - 0:DACs are enabled and are working normally - 1:DACs are powerdown -*/ -#define PNX8550_GLB_DAC_PD 0x2 -/* Bit 0:Enable of PCI inta output - 0 = Disable PCI inta output - 1 = Enable PCI inta output -*/ -#define PNX8550_GLB_ENABLE_INTA_O 0x1 - -/* PCI Direct Mappings */ -#define PNX8550_PCIMEM 0x12000000 -#define PNX8550_PCIMEM_SIZE 0x08000000 -#define PNX8550_PCIIO 0x1c000000 -#define PNX8550_PCIIO_SIZE 0x02000000 /* 32M */ - -#define PNX8550_PORT_BASE KSEG1 - -// GPIO def -#define PNX8550_GPIO_BASE 0x1Be00000 - -#define PNX8550_GPIO_DIRQ0 (PNX8550_GPIO_BASE + 0x104500) -#define PNX8550_GPIO_MC1 (PNX8550_GPIO_BASE + 0x104004) -#define PNX8550_GPIO_MC_31_BIT 30 -#define PNX8550_GPIO_MC_30_BIT 28 -#define PNX8550_GPIO_MC_29_BIT 26 -#define PNX8550_GPIO_MC_28_BIT 24 -#define PNX8550_GPIO_MC_27_BIT 22 -#define PNX8550_GPIO_MC_26_BIT 20 -#define PNX8550_GPIO_MC_25_BIT 18 -#define PNX8550_GPIO_MC_24_BIT 16 -#define PNX8550_GPIO_MC_23_BIT 14 -#define PNX8550_GPIO_MC_22_BIT 12 -#define PNX8550_GPIO_MC_21_BIT 10 -#define PNX8550_GPIO_MC_20_BIT 8 -#define PNX8550_GPIO_MC_19_BIT 6 -#define PNX8550_GPIO_MC_18_BIT 4 -#define PNX8550_GPIO_MC_17_BIT 2 -#define PNX8550_GPIO_MC_16_BIT 0 - -#define PNX8550_GPIO_MODE_PRIMOP 0x1 -#define PNX8550_GPIO_MODE_NO_OPENDR 0x2 -#define PNX8550_GPIO_MODE_OPENDR 0x3 - -// RESET module -#define PNX8550_RST_CTL *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0) -#define PNX8550_RST_CAUSE *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4) -#define PNX8550_RST_EN_WATCHDOG *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8) - -#define PNX8550_RST_REL_MIPS_RST_N 0x8 -#define PNX8550_RST_DO_SW_RST 0x4 -#define PNX8550_RST_REL_SYS_RST_OUT 0x2 -#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1 -#endif diff --git a/arch/mips/include/asm/mach-pnx8550/int.h b/arch/mips/include/asm/mach-pnx8550/int.h deleted file mode 100644 index 0e0668b..0000000 --- a/arch/mips/include/asm/mach-pnx8550/int.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Interrupt specific definitions - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -#ifndef __PNX8550_INT_H -#define __PNX8550_INT_H - -#define PNX8550_GIC_BASE 0xBBE3E000 - -#define PNX8550_GIC_PRIMASK_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000) -#define PNX8550_GIC_PRIMASK_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004) -#define PNX8550_GIC_VECTOR_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100) -#define PNX8550_GIC_VECTOR_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104) -#define PNX8550_GIC_PEND_1_31 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200) -#define PNX8550_GIC_PEND_32_63 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204) -#define PNX8550_GIC_PEND_64_70 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208) -#define PNX8550_GIC_FEATURES *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300) -#define PNX8550_GIC_REQ(x) *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4) -#define PNX8550_GIC_MOD_ID *(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC) - -// cp0 is two software + six hw exceptions -#define PNX8550_INT_CP0_TOTINT 8 -#define PNX8550_INT_CP0_MIN 0 -#define PNX8550_INT_CP0_MAX (PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1) - -#define MIPS_CPU_GIC_IRQ 2 -#define MIPS_CPU_TIMER_IRQ 7 - -// GIC are 71 exceptions connected to cp0's first hardware exception -#define PNX8550_INT_GIC_TOTINT 71 -#define PNX8550_INT_GIC_MIN (PNX8550_INT_CP0_MAX+1) -#define PNX8550_INT_GIC_MAX (PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1) - -#define PNX8550_INT_UNDEF (PNX8550_INT_GIC_MIN+0) -#define PNX8550_INT_IPC_TARGET0_MIPS (PNX8550_INT_GIC_MIN+1) -#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2) -#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3) -#define PNX8550_INT_RESERVED_4 (PNX8550_INT_GIC_MIN+4) -#define PNX8550_INT_USB (PNX8550_INT_GIC_MIN+5) -#define PNX8550_INT_GPIO_EQ1 (PNX8550_INT_GIC_MIN+6) -#define PNX8550_INT_GPIO_EQ2 (PNX8550_INT_GIC_MIN+7) -#define PNX8550_INT_GPIO_EQ3 (PNX8550_INT_GIC_MIN+8) -#define PNX8550_INT_GPIO_EQ4 (PNX8550_INT_GIC_MIN+9) - -#define PNX8550_INT_GPIO_EQ5 (PNX8550_INT_GIC_MIN+10) -#define PNX8550_INT_GPIO_EQ6 (PNX8550_INT_GIC_MIN+11) -#define PNX8550_INT_RESERVED_12 (PNX8550_INT_GIC_MIN+12) -#define PNX8550_INT_QVCP1 (PNX8550_INT_GIC_MIN+13) -#define PNX8550_INT_QVCP2 (PNX8550_INT_GIC_MIN+14) -#define PNX8550_INT_I2C1 (PNX8550_INT_GIC_MIN+15) -#define PNX8550_INT_I2C2 (PNX8550_INT_GIC_MIN+16) -#define PNX8550_INT_ISO_UART1 (PNX8550_INT_GIC_MIN+17) -#define PNX8550_INT_ISO_UART2 (PNX8550_INT_GIC_MIN+18) -#define PNX8550_INT_UART1 (PNX8550_INT_GIC_MIN+19) - -#define PNX8550_INT_UART2 (PNX8550_INT_GIC_MIN+20) -#define PNX8550_INT_QNTR (PNX8550_INT_GIC_MIN+21) -#define PNX8550_INT_RESERVED22 (PNX8550_INT_GIC_MIN+22) -#define PNX8550_INT_T_DSC (PNX8550_INT_GIC_MIN+23) -#define PNX8550_INT_M_DSC (PNX8550_INT_GIC_MIN+24) -#define PNX8550_INT_RESERVED25 (PNX8550_INT_GIC_MIN+25) -#define PNX8550_INT_2D_DRAW_ENG (PNX8550_INT_GIC_MIN+26) -#define PNX8550_INT_MEM_BASED_SCALAR1 (PNX8550_INT_GIC_MIN+27) -#define PNX8550_INT_VIDEO_MPEG (PNX8550_INT_GIC_MIN+28) -#define PNX8550_INT_VIDEO_INPUT_P1 (PNX8550_INT_GIC_MIN+29) - -#define PNX8550_INT_VIDEO_INPUT_P2 (PNX8550_INT_GIC_MIN+30) -#define PNX8550_INT_SPDI1 (PNX8550_INT_GIC_MIN+31) -#define PNX8550_INT_SPDO (PNX8550_INT_GIC_MIN+32) -#define PNX8550_INT_AUDIO_INPUT1 (PNX8550_INT_GIC_MIN+33) -#define PNX8550_INT_AUDIO_OUTPUT1 (PNX8550_INT_GIC_MIN+34) -#define PNX8550_INT_AUDIO_INPUT2 (PNX8550_INT_GIC_MIN+35) -#define PNX8550_INT_AUDIO_OUTPUT2 (PNX8550_INT_GIC_MIN+36) -#define PNX8550_INT_MEMBASED_SCALAR2 (PNX8550_INT_GIC_MIN+37) -#define PNX8550_INT_VPK (PNX8550_INT_GIC_MIN+38) -#define PNX8550_INT_MPEG1_MIPS (PNX8550_INT_GIC_MIN+39) - -#define PNX8550_INT_MPEG1_TM (PNX8550_INT_GIC_MIN+40) -#define PNX8550_INT_MPEG2_MIPS (PNX8550_INT_GIC_MIN+41) -#define PNX8550_INT_MPEG2_TM (PNX8550_INT_GIC_MIN+42) -#define PNX8550_INT_TS_DMA (PNX8550_INT_GIC_MIN+43) -#define PNX8550_INT_EDMA (PNX8550_INT_GIC_MIN+44) -#define PNX8550_INT_TM_DEBUG1 (PNX8550_INT_GIC_MIN+45) -#define PNX8550_INT_TM_DEBUG2 (PNX8550_INT_GIC_MIN+46) -#define PNX8550_INT_PCI_INTA (PNX8550_INT_GIC_MIN+47) -#define PNX8550_INT_CLOCK_MODULE (PNX8550_INT_GIC_MIN+48) -#define PNX8550_INT_PCI_XIO_INTA_PCI (PNX8550_INT_GIC_MIN+49) - -#define PNX8550_INT_PCI_XIO_INTB_DMA (PNX8550_INT_GIC_MIN+50) -#define PNX8550_INT_PCI_XIO_INTC_GPPM (PNX8550_INT_GIC_MIN+51) -#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52) -#define PNX8550_INT_DVD_CSS (PNX8550_INT_GIC_MIN+53) -#define PNX8550_INT_VLD (PNX8550_INT_GIC_MIN+54) -#define PNX8550_INT_GPIO_TSU_7_0 (PNX8550_INT_GIC_MIN+55) -#define PNX8550_INT_GPIO_TSU_15_8 (PNX8550_INT_GIC_MIN+56) -#define PNX8550_INT_GPIO_CTU_IR (PNX8550_INT_GIC_MIN+57) -#define PNX8550_INT_GPIO0 (PNX8550_INT_GIC_MIN+58) -#define PNX8550_INT_GPIO1 (PNX8550_INT_GIC_MIN+59) - -#define PNX8550_INT_GPIO2 (PNX8550_INT_GIC_MIN+60) -#define PNX8550_INT_GPIO3 (PNX8550_INT_GIC_MIN+61) -#define PNX8550_INT_GPIO4 (PNX8550_INT_GIC_MIN+62) -#define PNX8550_INT_GPIO5 (PNX8550_INT_GIC_MIN+63) -#define PNX8550_INT_GPIO6 (PNX8550_INT_GIC_MIN+64) -#define PNX8550_INT_GPIO7 (PNX8550_INT_GIC_MIN+65) -#define PNX8550_INT_PMAN_SECURITY (PNX8550_INT_GIC_MIN+66) -#define PNX8550_INT_I2C3 (PNX8550_INT_GIC_MIN+67) -#define PNX8550_INT_RESERVED_68 (PNX8550_INT_GIC_MIN+68) -#define PNX8550_INT_SPDI2 (PNX8550_INT_GIC_MIN+69) - -#define PNX8550_INT_I2C4 (PNX8550_INT_GIC_MIN+70) - -// Timer are 3 exceptions connected to cp0's 7th hardware exception -#define PNX8550_INT_TIMER_TOTINT 3 -#define PNX8550_INT_TIMER_MIN (PNX8550_INT_GIC_MAX+1) -#define PNX8550_INT_TIMER_MAX (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1) - -#define PNX8550_INT_TIMER1 (PNX8550_INT_TIMER_MIN+0) -#define PNX8550_INT_TIMER2 (PNX8550_INT_TIMER_MIN+1) -#define PNX8550_INT_TIMER3 (PNX8550_INT_TIMER_MIN+2) -#define PNX8550_INT_WATCHDOG PNX8550_INT_TIMER3 - -#endif diff --git a/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h deleted file mode 100644 index bdde00c..0000000 --- a/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h +++ /dev/null @@ -1,262 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Embedded Alley Solutions, Inc - */ -#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H -#define __ASM_MACH_KERNEL_ENTRY_INIT_H - -#include <asm/cacheops.h> -#include <asm/addrspace.h> - -#define CO_CONFIGPR_VALID 0x3F1F41FF /* valid bits to write to ConfigPR */ -#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; -#define CACHE_OPC 0xBC000000 /* MIPS cache instruction opcode */ -#define ICACHE_LINE_SIZE 32 /* Instruction cache line size bytes */ -#define DCACHE_LINE_SIZE 32 /* Data cache line size in bytes */ - -#define ICACHE_SET_COUNT 256 /* Instruction cache set count */ -#define DCACHE_SET_COUNT 128 /* Data cache set count */ - -#define ICACHE_SET_SIZE (ICACHE_SET_COUNT * ICACHE_LINE_SIZE) -#define DCACHE_SET_SIZE (DCACHE_SET_COUNT * DCACHE_LINE_SIZE) - - .macro kernel_entry_setup - .set push - .set noreorder - /* - * PNX8550 entry point, when running a non compressed - * kernel. When loading a zImage, the head.S code in - * arch/mips/zboot/pnx8550 will init the caches and, - * decompress the kernel, and branch to kernel_entry. - */ -cache_begin: li t0, (1<<28) - mtc0 t0, CP0_STATUS /* cp0 usable */ - HAZARD_CP0 - - mtc0 zero, CP0_CAUSE - HAZARD_CP0 - - - /* Set static virtual to phys address translation and TLB disabled */ - mfc0 t0, CP0_CONFIG, 7 - HAZARD_CP0 - - and t0, ~((1<<19) | (1<<20)) /* TLB/MAP cleared */ - mtc0 t0, CP0_CONFIG, 7 - HAZARD_CP0 - - /* CPU boots with kseg0 cache algo set to 0x2 -- uncached */ - - init_icache - nop - init_dcache - nop - - cachePr4450ICReset - nop - - cachePr4450DCReset - nop - - /* read ConfigPR into t0 */ - mfc0 t0, CP0_CONFIG, 7 - HAZARD_CP0 - - /* enable the TLB */ - or t0, (1<<19) - - /* disable the ICACHE: at least 10x slower */ - /* or t0, (1<<26) */ - - /* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set */ - /* or t0, (1<<27) */ - - and t0, CO_CONFIGPR_VALID - - /* enable TLB. */ - mtc0 t0, CP0_CONFIG, 7 - HAZARD_CP0 -cache_end: - /* Setup CMEM_0 to MMIO address space, 2MB */ - lui t0, 0x1BE0 - addi t0, t0, 0x3 - mtc0 $8, $22, 4 - nop - - /* Setup CMEM_1, 128MB */ - lui t0, 0x1000 - addi t0, t0, 0xf - mtc0 $8, $22, 5 - nop - - - /* Setup CMEM_2, 32MB */ - lui t0, 0x1C00 - addi t0, t0, 0xb - mtc0 $8, $22, 6 - nop - - /* Setup CMEM_3, 0MB */ - lui t0, 0x0 - addi t0, t0, 0x0 - mtc0 $8, $22, 7 - nop - - /* Enable cache */ - mfc0 t0, CP0_CONFIG - HAZARD_CP0 - and t0, t0, 0xFFFFFFF8 - or t0, t0, 3 - mtc0 t0, CP0_CONFIG - HAZARD_CP0 - .set pop - .endm - - .macro init_icache - .set push - .set noreorder - - /* Get Cache Configuration */ - mfc0 t3, CP0_CONFIG, 1 - HAZARD_CP0 - - /* get cache Line size */ - - srl t1, t3, 19 /* C0_CONFIGPR_IL_SHIFT */ - andi t1, t1, 0x7 /* C0_CONFIGPR_IL_MASK */ - beq t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */ - nop - addiu t0, t1, 1 - ori t1, zero, 1 - sllv t1, t1, t0 - - /* get max cache Index */ - srl t2, t3, 22 /* C0_CONFIGPR_IS_SHIFT */ - andi t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */ - addiu t0, t2, 6 - ori t2, zero, 1 - sllv t2, t2, t0 - - /* get max cache way */ - srl t3, t3, 16 /* C0_CONFIGPR_IA_SHIFT */ - andi t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */ - addiu t3, t3, 1 - - /* total no of cache lines */ - multu t2, t3 /* max index * max way */ - mflo t2 - addiu t2, t2, -1 - - move t0, zero -pr4450_next_instruction_cache_set: - cache Index_Invalidate_I, 0(t0) - addu t0, t0, t1 /* add bytes in a line */ - bne t2, zero, pr4450_next_instruction_cache_set - addiu t2, t2, -1 /* reduce no of lines to invalidate by one */ -pr4450_instr_cache_invalidated: - .set pop - .endm - - .macro init_dcache - .set push - .set noreorder - move t1, zero - - /* Store Tag Information */ - mtc0 zero, CP0_TAGLO, 0 - HAZARD_CP0 - - mtc0 zero, CP0_TAGHI, 0 - HAZARD_CP0 - - /* Cache size is 16384 = 512 lines x 32 bytes per line */ - or t2, zero, (128*4)-1 /* 512 lines */ - /* Invalidate all lines */ -2: - cache Index_Store_Tag_D, 0(t1) - addiu t2, t2, -1 - bne t2, zero, 2b - addiu t1, t1, 32 /* 32 bytes in a line */ - .set pop - .endm - - .macro cachePr4450ICReset - .set push - .set noreorder - - /* Save CP0 status reg on entry; */ - /* disable interrupts during cache reset */ - mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */ - HAZARD_CP0 - - mtc0 zero, CP0_STATUS /* disable CPU interrupts */ - HAZARD_CP0 - - or t1, zero, zero /* T1 = starting cache index (0) */ - ori t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */ - - icache_invd_loop: - /* 9 == register t1 */ - .word CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \ - (0 * ICACHE_SET_SIZE) /* invalidate inst cache WAY0 */ - .word CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \ - (1 * ICACHE_SET_SIZE) /* invalidate inst cache WAY1 */ - - addiu t1, t1, ICACHE_LINE_SIZE /* T1 = next cache line index */ - bne t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */ - addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */ - - /* Initialize the latches in the instruction cache tag */ - /* that drive the way selection tri-state bus drivers, by doing a */ - /* dummy load while the instruction cache is still disabled. */ - /* TODO: Is this needed ? */ - la t1, KSEG0 /* T1 = cached memory base address */ - lw zero, 0x0000(t1) /* (dummy read of first memory word) */ - - mtc0 t0, CP0_STATUS /* restore interrupt status on entry */ - HAZARD_CP0 - .set pop - .endm - - .macro cachePr4450DCReset - .set push - .set noreorder - mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */ - HAZARD_CP0 - mtc0 zero, CP0_STATUS /* disable CPU interrupts */ - HAZARD_CP0 - - /* Writeback/invalidate entire data cache sets/ways/lines */ - or t1, zero, zero /* T1 = starting cache index (0) */ - ori t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */ - - dcache_wbinvd_loop: - /* 9 == register t1 */ - .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ - (0 * DCACHE_SET_SIZE) /* writeback/invalidate WAY0 */ - .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ - (1 * DCACHE_SET_SIZE) /* writeback/invalidate WAY1 */ - .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ - (2 * DCACHE_SET_SIZE) /* writeback/invalidate WAY2 */ - .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \ - (3 * DCACHE_SET_SIZE) /* writeback/invalidate WAY3 */ - - addiu t1, t1, DCACHE_LINE_SIZE /* T1 = next data cache line index */ - bne t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */ - addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */ - - /* Initialize the latches in the data cache tag that drive the way - selection tri-state bus drivers, by doing a dummy load while the - data cache is still in the disabled mode. TODO: Is this needed ? */ - la t1, KSEG0 /* T1 = cached memory base address */ - lw zero, 0x0000(t1) /* (dummy read of first memory word) */ - - mtc0 t0, CP0_STATUS /* restore interrupt status on entry */ - HAZARD_CP0 - .set pop - .endm - -#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */ diff --git a/arch/mips/include/asm/mach-pnx8550/nand.h b/arch/mips/include/asm/mach-pnx8550/nand.h deleted file mode 100644 index aefbc51..0000000 --- a/arch/mips/include/asm/mach-pnx8550/nand.h +++ /dev/null @@ -1,121 +0,0 @@ -#ifndef __PNX8550_NAND_H -#define __PNX8550_NAND_H - -#define PNX8550_NAND_BASE_ADDR 0x10000000 -#define PNX8550_PCIXIO_BASE 0xBBE40000 - -#define PNX8550_DMA_EXT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800) -#define PNX8550_DMA_INT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804) -#define PNX8550_DMA_TRANS_SIZE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808) -#define PNX8550_DMA_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c) -#define PNX8550_XIO_SEL0 *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814) -#define PNX8550_GPXIO_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820) -#define PNX8550_GPXIO_WR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824) -#define PNX8550_GPXIO_RD *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828) -#define PNX8550_GPXIO_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C) -#define PNX8550_XIO_FLASH_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830) -#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0) -#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4) -#define PNX8550_GPXIO_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8) -#define PNX8550_DMA_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0) -#define PNX8550_DMA_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4) -#define PNX8550_DMA_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8) - -#define PNX8550_XIO_SEL0_EN_16BIT 0x00800000 -#define PNX8550_XIO_SEL0_USE_ACK 0x00400000 -#define PNX8550_XIO_SEL0_REN_HIGH 0x00100000 -#define PNX8550_XIO_SEL0_REN_LOW 0x00040000 -#define PNX8550_XIO_SEL0_WEN_HIGH 0x00010000 -#define PNX8550_XIO_SEL0_WEN_LOW 0x00004000 -#define PNX8550_XIO_SEL0_WAIT 0x00000200 -#define PNX8550_XIO_SEL0_OFFSET 0x00000020 -#define PNX8550_XIO_SEL0_TYPE_68360 0x00000000 -#define PNX8550_XIO_SEL0_TYPE_NOR 0x00000008 -#define PNX8550_XIO_SEL0_TYPE_NAND 0x00000010 -#define PNX8550_XIO_SEL0_TYPE_IDE 0x00000018 -#define PNX8550_XIO_SEL0_SIZE_8MB 0x00000000 -#define PNX8550_XIO_SEL0_SIZE_16MB 0x00000002 -#define PNX8550_XIO_SEL0_SIZE_32MB 0x00000004 -#define PNX8550_XIO_SEL0_SIZE_64MB 0x00000006 -#define PNX8550_XIO_SEL0_ENAB 0x00000001 - -#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT) | \ - (PNX8550_XIO_SEL0_REN_HIGH*0)| \ - (PNX8550_XIO_SEL0_REN_LOW*2) | \ - (PNX8550_XIO_SEL0_WEN_HIGH*0)| \ - (PNX8550_XIO_SEL0_WEN_LOW*2) | \ - (PNX8550_XIO_SEL0_WAIT*4) | \ - (PNX8550_XIO_SEL0_OFFSET*0) | \ - (PNX8550_XIO_SEL0_TYPE_NAND) | \ - (PNX8550_XIO_SEL0_SIZE_32MB) | \ - (PNX8550_XIO_SEL0_ENAB)) - -#define PNX8550_GPXIO_PENDING 0x00000200 -#define PNX8550_GPXIO_DONE 0x00000100 -#define PNX8550_GPXIO_CLR_DONE 0x00000080 -#define PNX8550_GPXIO_INIT 0x00000040 -#define PNX8550_GPXIO_READ_CMD 0x00000010 -#define PNX8550_GPXIO_BEN 0x0000000F - -#define PNX8550_XIO_FLASH_64MB 0x00200000 -#define PNX8550_XIO_FLASH_INC_DATA 0x00100000 -#define PNX8550_XIO_FLASH_CMD_PH 0x000C0000 -#define PNX8550_XIO_FLASH_CMD_PH2 0x00080000 -#define PNX8550_XIO_FLASH_CMD_PH1 0x00040000 -#define PNX8550_XIO_FLASH_CMD_PH0 0x00000000 -#define PNX8550_XIO_FLASH_ADR_PH 0x00030000 -#define PNX8550_XIO_FLASH_ADR_PH3 0x00030000 -#define PNX8550_XIO_FLASH_ADR_PH2 0x00020000 -#define PNX8550_XIO_FLASH_ADR_PH1 0x00010000 -#define PNX8550_XIO_FLASH_ADR_PH0 0x00000000 -#define PNX8550_XIO_FLASH_CMD_B(x) ((x<<8) & 0x0000FF00) -#define PNX8550_XIO_FLASH_CMD_A(x) (x & 0x000000FF) - -#define PNX8550_XIO_INT_ACK 0x00004000 -#define PNX8550_XIO_INT_COMPL 0x00002000 -#define PNX8550_XIO_INT_NONSUP 0x00000200 -#define PNX8550_XIO_INT_ABORT 0x00000004 - -#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400 -#define PNX8550_DMA_CTRL_SND2XIO 0x00000200 -#define PNX8550_DMA_CTRL_FIX_ADDR 0x00000100 -#define PNX8550_DMA_CTRL_BURST_8 0x00000000 -#define PNX8550_DMA_CTRL_BURST_16 0x00000020 -#define PNX8550_DMA_CTRL_BURST_32 0x00000040 -#define PNX8550_DMA_CTRL_BURST_64 0x00000060 -#define PNX8550_DMA_CTRL_BURST_128 0x00000080 -#define PNX8550_DMA_CTRL_BURST_256 0x000000A0 -#define PNX8550_DMA_CTRL_BURST_512 0x000000C0 -#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0 -#define PNX8550_DMA_CTRL_INIT_DMA 0x00000010 -#define PNX8550_DMA_CTRL_CMD_TYPE 0x0000000F - -/* see PCI system arch, page 100 for the full list: */ -#define PNX8550_DMA_CTRL_PCI_CMD_READ 0x00000006 -#define PNX8550_DMA_CTRL_PCI_CMD_WRITE 0x00000007 - -#define PNX8550_DMA_INT_STAT_ACK_DONE (1<<14) -#define PNX8550_DMA_INT_STAT_DMA_DONE (1<<12) -#define PNX8550_DMA_INT_STAT_DMA_ERR (1<<9) -#define PNX8550_DMA_INT_STAT_PERR5 (1<<5) -#define PNX8550_DMA_INT_STAT_PERR4 (1<<4) -#define PNX8550_DMA_INT_STAT_M_ABORT (1<<2) -#define PNX8550_DMA_INT_STAT_T_ABORT (1<<1) - -#define PNX8550_DMA_INT_EN_ACK_DONE (1<<14) -#define PNX8550_DMA_INT_EN_DMA_DONE (1<<12) -#define PNX8550_DMA_INT_EN_DMA_ERR (1<<9) -#define PNX8550_DMA_INT_EN_PERR5 (1<<5) -#define PNX8550_DMA_INT_EN_PERR4 (1<<4) -#define PNX8550_DMA_INT_EN_M_ABORT (1<<2) -#define PNX8550_DMA_INT_EN_T_ABORT (1<<1) - -#define PNX8550_DMA_INT_CLR_ACK_DONE (1<<14) -#define PNX8550_DMA_INT_CLR_DMA_DONE (1<<12) -#define PNX8550_DMA_INT_CLR_DMA_ERR (1<<9) -#define PNX8550_DMA_INT_CLR_PERR5 (1<<5) -#define PNX8550_DMA_INT_CLR_PERR4 (1<<4) -#define PNX8550_DMA_INT_CLR_M_ABORT (1<<2) -#define PNX8550_DMA_INT_CLR_T_ABORT (1<<1) - -#endif diff --git a/arch/mips/include/asm/mach-pnx8550/pci.h b/arch/mips/include/asm/mach-pnx8550/pci.h deleted file mode 100644 index b921508..0000000 --- a/arch/mips/include/asm/mach-pnx8550/pci.h +++ /dev/null @@ -1,185 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * PCI specific definitions - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -#ifndef __PNX8550_PCI_H -#define __PNX8550_PCI_H - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -#define PCI_CMD_IOR 0x20 -#define PCI_CMD_IOW 0x30 -#define PCI_CMD_CONFIG_READ 0xa0 -#define PCI_CMD_CONFIG_WRITE 0xb0 - -#define PCI_IO_TIMEOUT 1000 -#define PCI_IO_RETRY 5 -/* Timeout for IO and CFG accesses. - This is in 1/1024 th of a jiffie(=10ms) - i.e. approx 10us */ -#define PCI_IO_JIFFIES_TIMEOUT 40 -#define PCI_IO_JIFFIES_SHIFT 10 - -#define PCI_BYTE_ENABLE_MASK 0x0000000f -#define PCI_CFG_BUS_SHIFT 16 -#define PCI_CFG_FUNC_SHIFT 8 -#define PCI_CFG_REG_SHIFT 2 - -#define PCI_BASE 0x1be00000 -#define PCI_SETUP 0x00040010 -#define PCI_DIS_REQGNT (1<<30) -#define PCI_DIS_REQGNTA (1<<29) -#define PCI_DIS_REQGNTB (1<<28) -#define PCI_D2_SUPPORT (1<<27) -#define PCI_D1_SUPPORT (1<<26) -#define PCI_EN_TA (1<<24) -#define PCI_EN_PCI2MMI (1<<23) -#define PCI_EN_XIO (1<<22) -#define PCI_BASE18_PREF (1<<21) -#define SIZE_16M 0x3 -#define SIZE_32M 0x4 -#define SIZE_64M 0x5 -#define SIZE_128M 0x6 -#define PCI_SETUP_BASE18_SIZE(X) (X<<18) -#define PCI_SETUP_BASE18_EN (1<<17) -#define PCI_SETUP_BASE14_PREF (1<<16) -#define PCI_SETUP_BASE14_SIZE(X) (X<<12) -#define PCI_SETUP_BASE14_EN (1<<11) -#define PCI_SETUP_BASE10_PREF (1<<10) -#define PCI_SETUP_BASE10_SIZE(X) (X<<7) -#define PCI_SETUP_CFGMANAGE_EN (1<<1) -#define PCI_SETUP_PCIARB_EN (1<<0) - -#define PCI_CTRL 0x040014 -#define PCI_SWPB_DCS_PCI (1<<16) -#define PCI_SWPB_PCI_PCI (1<<15) -#define PCI_SWPB_PCI_DCS (1<<14) -#define PCI_REG_WR_POST (1<<13) -#define PCI_XIO_WR_POST (1<<12) -#define PCI_PCI2_WR_POST (1<<13) -#define PCI_PCI1_WR_POST (1<<12) -#define PCI_SERR_SEEN (1<<11) -#define PCI_B10_SPEC_RD (1<<6) -#define PCI_B14_SPEC_RD (1<<5) -#define PCI_B18_SPEC_RD (1<<4) -#define PCI_B10_NOSUBWORD (1<<3) -#define PCI_B14_NOSUBWORD (1<<2) -#define PCI_B18_NOSUBWORD (1<<1) -#define PCI_RETRY_TMREN (1<<0) - -#define PCI_BASE1_LO 0x040018 -#define PCI_BASE1_HI 0x04001C -#define PCI_BASE2_LO 0x040020 -#define PCI_BASE2_HI 0x040024 -#define PCI_RDLIFETIM 0x040028 -#define PCI_GPPM_ADDR 0x04002C -#define PCI_GPPM_WDAT 0x040030 -#define PCI_GPPM_RDAT 0x040034 -#define PCI_GPPM_CTRL 0x040038 -#define GPPM_DONE (1<<10) -#define INIT_PCI_CYCLE (1<<9) -#define GPPM_CMD(X) (((X)&0xf)<<4) -#define GPPM_BYTEEN(X) ((X)&0xf) -#define PCI_UNLOCKREG 0x04003C -#define UNLOCK_SSID(X) (((X)&0xff)<<8) -#define UNLOCK_SETUP(X) (((X)&0xff)<<0) -#define UNLOCK_MAGIC 0xCA -#define PCI_DEV_VEND_ID 0x040040 -#define DEVICE_ID(X) (((X)>>16)&0xffff) -#define VENDOR_ID(X) (((X)&0xffff)) -#define PCI_CFG_CMDSTAT 0x040044 -#define PCI_CFG_STATUS(X) (((X)>>16)&0xffff) -#define PCI_CFG_COMMAND(X) ((X)&0xffff) -#define PCI_CLASS_REV 0x040048 -#define PCI_CLASSCODE(X) (((X)>>8)&0xffffff) -#define PCI_REVID(X) ((X)&0xff) -#define PCI_LAT_TMR 0x04004c -#define PCI_BASE10 0x040050 -#define PCI_BASE14 0x040054 -#define PCI_BASE18 0x040058 -#define PCI_SUBSYS_ID 0x04006c -#define PCI_CAP_PTR 0x040074 -#define PCI_CFG_MISC 0x04007c -#define PCI_PMC 0x040080 -#define PCI_PWR_STATE 0x040084 -#define PCI_IO 0x040088 -#define PCI_SLVTUNING 0x04008C -#define PCI_DMATUNING 0x040090 -#define PCI_DMAEADDR 0x040800 -#define PCI_DMAIADDR 0x040804 -#define PCI_DMALEN 0x040808 -#define PCI_DMACTRL 0x04080C -#define PCI_XIOCTRL 0x040810 -#define PCI_SEL0PROF 0x040814 -#define PCI_SEL1PROF 0x040818 -#define PCI_SEL2PROF 0x04081C -#define PCI_GPXIOADDR 0x040820 -#define PCI_NANDCTRLS 0x400830 -#define PCI_SEL3PROF 0x040834 -#define PCI_SEL4PROF 0x040838 -#define PCI_GPXIO_STAT 0x040FB0 -#define PCI_GPXIO_IMASK 0x040FB4 -#define PCI_GPXIO_ICLR 0x040FB8 -#define PCI_GPXIO_ISET 0x040FBC -#define PCI_GPPM_STATUS 0x040FC0 -#define GPPM_DONE (1<<10) -#define GPPM_ERR (1<<9) -#define GPPM_MPAR_ERR (1<<8) -#define GPPM_PAR_ERR (1<<7) -#define GPPM_R_MABORT (1<<2) -#define GPPM_R_TABORT (1<<1) -#define PCI_GPPM_IMASK 0x040FC4 -#define PCI_GPPM_ICLR 0x040FC8 -#define PCI_GPPM_ISET 0x040FCC -#define PCI_DMA_STATUS 0x040FD0 -#define PCI_DMA_IMASK 0x040FD4 -#define PCI_DMA_ICLR 0x040FD8 -#define PCI_DMA_ISET 0x040FDC -#define PCI_ISTATUS 0x040FE0 -#define PCI_IMASK 0x040FE4 -#define PCI_ICLR 0x040FE8 -#define PCI_ISET 0x040FEC -#define PCI_MOD_ID 0x040FFC - -/* - * PCI configuration cycle AD bus definition - */ -/* Type 0 */ -#define PCI_CFG_TYPE0_REG_SHF 0 -#define PCI_CFG_TYPE0_FUNC_SHF 8 - -/* Type 1 */ -#define PCI_CFG_TYPE1_REG_SHF 0 -#define PCI_CFG_TYPE1_FUNC_SHF 8 -#define PCI_CFG_TYPE1_DEV_SHF 11 -#define PCI_CFG_TYPE1_BUS_SHF 16 - -/* - * Ethernet device DP83816 definition - */ -#define DP83816_IRQ_ETHER 66 - -#endif diff --git a/arch/mips/include/asm/mach-pnx8550/uart.h b/arch/mips/include/asm/mach-pnx8550/uart.h deleted file mode 100644 index ad7608d..0000000 --- a/arch/mips/include/asm/mach-pnx8550/uart.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __IP3106_UART_H -#define __IP3106_UART_H - -#include <int.h> - -/* early macros for kgdb use. fixme: clean this up */ - -#define UART_BASE 0xbbe4a000 /* PNX8550 */ - -#define PNX8550_UART_PORT0 (UART_BASE) -#define PNX8550_UART_PORT1 (UART_BASE + 0x1000) - -#define PNX8550_UART_INT(x) (PNX8550_INT_GIC_MIN+19+x) -#define IRQ_TO_UART(x) (x-PNX8550_INT_GIC_MIN-19) - -/* early macros needed for prom/kgdb */ - -#define ip3106_lcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x000) -#define ip3106_mcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x004) -#define ip3106_baud(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x008) -#define ip3106_cfg(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x00C) -#define ip3106_fifo(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x028) -#define ip3106_istat(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE0) -#define ip3106_ien(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE4) -#define ip3106_iclr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE8) -#define ip3106_iset(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFEC) -#define ip3106_pd(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFF4) -#define ip3106_mid(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFFC) - -#endif diff --git a/arch/mips/include/asm/mach-pnx8550/usb.h b/arch/mips/include/asm/mach-pnx8550/usb.h deleted file mode 100644 index 483b7fc..0000000 --- a/arch/mips/include/asm/mach-pnx8550/usb.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * USB specific definitions - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -#ifndef __PNX8550_USB_H -#define __PNX8550_USB_H - -/* - * USB Host controller - */ - -#define PNX8550_USB_OHCI_OP_BASE 0x1be48000 -#define PNX8550_USB_OHCI_OP_LEN 0x1000 - -#endif diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h index c7077a6..b341108 100644 --- a/arch/mips/include/asm/mach-powertv/asic.h +++ b/arch/mips/include/asm/mach-powertv/asic.h @@ -23,9 +23,9 @@ #include <linux/platform_device.h> #include <asm/mach-powertv/asic_regs.h> -#define DVR_CAPABLE (1<<0) -#define PCIE_CAPABLE (1<<1) -#define FFS_CAPABLE (1<<2) +#define DVR_CAPABLE (1<<0) +#define PCIE_CAPABLE (1<<1) +#define FFS_CAPABLE (1<<2) #define DISPLAY_CAPABLE (1<<3) /* Platform Family types @@ -111,7 +111,7 @@ enum sys_reboot_type { * Older drivers may report as * userReboot. */ sys_hardware_reset = 0x09, /* HW watchdog or front-panel - * reset button reset. Older + * reset button reset. Older * drivers may report as * userReboot. */ sys_watchdogInterrupt = 0x0A /* Pre-watchdog interrupt */ diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h index deecb26..06712ab 100644 --- a/arch/mips/include/asm/mach-powertv/asic_regs.h +++ b/arch/mips/include/asm/mach-powertv/asic_regs.h @@ -49,8 +49,8 @@ enum asic_type { #define UART1_INTEN uart1_inten #define UART1_CONFIG1 uart1_config1 #define UART1_CONFIG2 uart1_config2 -#define UART1_DIVISORHI uart1_divisorhi -#define UART1_DIVISORLO uart1_divisorlo +#define UART1_DIVISORHI uart1_divisorhi +#define UART1_DIVISORLO uart1_divisorlo #define UART1_DATA uart1_data #define UART1_STATUS uart1_status diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h index 3537164..f831672 100644 --- a/arch/mips/include/asm/mach-powertv/dma-coherence.h +++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h @@ -4,7 +4,7 @@ * for more details. * * Version from mach-generic modified to support PowerTV port - * Portions Copyright (C) 2009 Cisco Systems, Inc. + * Portions Copyright (C) 2009 Cisco Systems, Inc. * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> * */ diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h index 4fd652c..6c463be 100644 --- a/arch/mips/include/asm/mach-powertv/interrupts.h +++ b/arch/mips/include/asm/mach-powertv/interrupts.h @@ -16,7 +16,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_ +#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_ #define _ASM_MACH_POWERTV_INTERRUPTS_H_ /* @@ -49,9 +49,9 @@ * glue logic inside SPARC ILC * (see INT_SBAG_STAT, below, * for individual interrupts) */ -#define irq_qam_b_fec (ibase+116) /* QAM B FEC Interrupt */ +#define irq_qam_b_fec (ibase+116) /* QAM B FEC Interrupt */ #define irq_qam_a_fec (ibase+115) /* QAM A FEC Interrupt */ -/* 114 unused (bit 18) */ +/* 114 unused (bit 18) */ #define irq_mailbox (ibase+113) /* Mailbox Debug Interrupt -- * Ored by glue logic inside * SPARC ILC (see @@ -99,9 +99,9 @@ #define irq_sata1 (ibase+87) /* SATA 1 Interrupt */ #define irq_dtcp (ibase+86) /* DTCP Interrupt */ #define irq_pciexp1 (ibase+85) /* PCI Express 1 Interrupt */ -/* 84 unused (bit 20) */ -/* 83 unused (bit 19) */ -/* 82 unused (bit 18) */ +/* 84 unused (bit 20) */ +/* 83 unused (bit 19) */ +/* 82 unused (bit 18) */ #define irq_sata2 (ibase+81) /* SATA2 Interrupt */ #define irq_uart2 (ibase+80) /* UART2 Interrupt */ #define irq_legacy_usb (ibase+79) /* Legacy USB Host ISR (1.1 @@ -117,22 +117,22 @@ #define irq_mod_dma (ibase+70) /* Modulator DMA Interrupt */ #define irq_byte_eng1 (ibase+69) /* Byte Engine Interrupt [1] */ #define irq_byte_eng0 (ibase+68) /* Byte Engine Interrupt [0] */ -/* 67 unused (bit 03) */ -/* 66 unused (bit 02) */ -/* 65 unused (bit 01) */ -/* 64 unused (bit 00) */ +/* 67 unused (bit 03) */ +/* 66 unused (bit 02) */ +/* 65 unused (bit 01) */ +/* 64 unused (bit 00) */ /*------------- Register: int_stat_1 */ -/* 63 unused (bit 31) */ -/* 62 unused (bit 30) */ -/* 61 unused (bit 29) */ -/* 60 unused (bit 28) */ -/* 59 unused (bit 27) */ -/* 58 unused (bit 26) */ -/* 57 unused (bit 25) */ -/* 56 unused (bit 24) */ +/* 63 unused (bit 31) */ +/* 62 unused (bit 30) */ +/* 61 unused (bit 29) */ +/* 60 unused (bit 28) */ +/* 59 unused (bit 27) */ +/* 58 unused (bit 26) */ +/* 57 unused (bit 25) */ +/* 56 unused (bit 24) */ #define irq_buf_dma_mem2mem (ibase+55) /* BufDMA Memory to Memory * Interrupt */ -#define irq_buf_dma_usbtransmit (ibase+54) /* BufDMA USB Transmit +#define irq_buf_dma_usbtransmit (ibase+54) /* BufDMA USB Transmit * Interrupt */ #define irq_buf_dma_qpskpodtransmit (ibase+53) /* BufDMA QPSK/POD Tramsit * Interrupt */ @@ -140,7 +140,7 @@ * Interrupt */ #define irq_buf_dma_usbrecv (ibase+51) /* BufDMA USB Receive * Interrupt */ -#define irq_buf_dma_qpskpodrecv (ibase+50) /* BufDMA QPSK/POD Receive +#define irq_buf_dma_qpskpodrecv (ibase+50) /* BufDMA QPSK/POD Receive * Interrupt */ #define irq_buf_dma_recv_error (ibase+49) /* BufDMA Receive Error * Interrupt */ @@ -166,7 +166,7 @@ * Module */ #define irq_gpio2 (ibase+37) /* GP I/O IRQ 2 - From GP I/O * Module (ABE_intN) */ -#define irq_pcrcmplt1 (ibase+36) /* PCR Capture Complete or +#define irq_pcrcmplt1 (ibase+36) /* PCR Capture Complete or * Discontinuity 1 */ #define irq_pcrcmplt2 (ibase+35) /* PCR Capture Complete or * Discontinuity 2 */ @@ -217,18 +217,18 @@ #define irq_qpsk_hecerr (ibase+11) /* QPSK HEC Error Interrupt */ #define irq_qpsk_crcerr (ibase+10) /* QPSK AAL-5 CRC Error * Interrupt */ -/* 9 unused (bit 09) */ -/* 8 unused (bit 08) */ -#define irq_psicrcerr (ibase+7) /* QAM PSI CRC Error +/* 9 unused (bit 09) */ +/* 8 unused (bit 08) */ +#define irq_psicrcerr (ibase+7) /* QAM PSI CRC Error * Interrupt */ -#define irq_psilength_err (ibase+6) /* QAM PSI Length Error +#define irq_psilength_err (ibase+6) /* QAM PSI Length Error * Interrupt */ -#define irq_esfforward (ibase+5) /* ESF Interrupt Mark From +#define irq_esfforward (ibase+5) /* ESF Interrupt Mark From * Forward Path Reference - * every 3ms when forward Mbits * and forward slot control * bytes are updated. */ -#define irq_esfreverse (ibase+4) /* ESF Interrupt Mark from +#define irq_esfreverse (ibase+4) /* ESF Interrupt Mark from * Reverse Path Reference - * delayed from forward mark by * the ranging delay plus a @@ -239,15 +239,15 @@ * 1.554 M upstream rates and * every 6 ms for 256K upstream * rate. */ -#define irq_aloha_timeout (ibase+3) /* Slotted-Aloha timeout on +#define irq_aloha_timeout (ibase+3) /* Slotted-Aloha timeout on * Channel 1. */ -#define irq_reservation (ibase+2) /* Partial (or Incremental) +#define irq_reservation (ibase+2) /* Partial (or Incremental) * Reservation Message Completed * or Slotted aloha verify for * channel 1. */ -#define irq_aloha3 (ibase+1) /* Slotted-Aloha Message Verify +#define irq_aloha3 (ibase+1) /* Slotted-Aloha Message Verify * Interrupt or Reservation * increment completed for * channel 3. */ -#define irq_mpeg_d (ibase+0) /* MPEG Decoder Interrupt */ +#define irq_mpeg_d (ibase+0) /* MPEG Decoder Interrupt */ #endif /* _ASM_MACH_POWERTV_INTERRUPTS_H_ */ diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h new file mode 100644 index 0000000..5a508f9 --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h @@ -0,0 +1,39 @@ +/* + * Ralink SoC register definitions + * + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RALINK_REGS_H_ +#define _RALINK_REGS_H_ + +extern __iomem void *rt_sysc_membase; +extern __iomem void *rt_memc_membase; + +static inline void rt_sysc_w32(u32 val, unsigned reg) +{ + __raw_writel(val, rt_sysc_membase + reg); +} + +static inline u32 rt_sysc_r32(unsigned reg) +{ + return __raw_readl(rt_sysc_membase + reg); +} + +static inline void rt_memc_w32(u32 val, unsigned reg) +{ + __raw_writel(val, rt_memc_membase + reg); +} + +static inline u32 rt_memc_r32(unsigned reg) +{ + return __raw_readl(rt_memc_membase + reg); +} + +#endif /* _RALINK_REGS_H_ */ diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h new file mode 100644 index 0000000..7d344f2 --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/rt305x.h @@ -0,0 +1,139 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#ifndef _RT305X_REGS_H_ +#define _RT305X_REGS_H_ + +enum rt305x_soc_type { + RT305X_SOC_UNKNOWN = 0, + RT305X_SOC_RT3050, + RT305X_SOC_RT3052, + RT305X_SOC_RT3350, + RT305X_SOC_RT3352, + RT305X_SOC_RT5350, +}; + +extern enum rt305x_soc_type rt305x_soc; + +static inline int soc_is_rt3050(void) +{ + return rt305x_soc == RT305X_SOC_RT3050; +} + +static inline int soc_is_rt3052(void) +{ + return rt305x_soc == RT305X_SOC_RT3052; +} + +static inline int soc_is_rt305x(void) +{ + return soc_is_rt3050() || soc_is_rt3052(); +} + +static inline int soc_is_rt3350(void) +{ + return rt305x_soc == RT305X_SOC_RT3350; +} + +static inline int soc_is_rt3352(void) +{ + return rt305x_soc == RT305X_SOC_RT3352; +} + +static inline int soc_is_rt5350(void) +{ + return rt305x_soc == RT305X_SOC_RT5350; +} + +#define RT305X_SYSC_BASE 0x10000000 + +#define SYSC_REG_CHIP_NAME0 0x00 +#define SYSC_REG_CHIP_NAME1 0x04 +#define SYSC_REG_CHIP_ID 0x0c +#define SYSC_REG_SYSTEM_CONFIG 0x10 + +#define RT3052_CHIP_NAME0 0x30335452 +#define RT3052_CHIP_NAME1 0x20203235 + +#define RT3350_CHIP_NAME0 0x33335452 +#define RT3350_CHIP_NAME1 0x20203035 + +#define RT3352_CHIP_NAME0 0x33335452 +#define RT3352_CHIP_NAME1 0x20203235 + +#define RT5350_CHIP_NAME0 0x33355452 +#define RT5350_CHIP_NAME1 0x20203035 + +#define CHIP_ID_ID_MASK 0xff +#define CHIP_ID_ID_SHIFT 8 +#define CHIP_ID_REV_MASK 0xff + +#define RT305X_SYSCFG_CPUCLK_SHIFT 18 +#define RT305X_SYSCFG_CPUCLK_MASK 0x1 +#define RT305X_SYSCFG_CPUCLK_LOW 0x0 +#define RT305X_SYSCFG_CPUCLK_HIGH 0x1 + +#define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2 +#define RT305X_SYSCFG_CPUCLK_MASK 0x1 +#define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 0x1 + +#define RT3352_SYSCFG0_CPUCLK_SHIFT 8 +#define RT3352_SYSCFG0_CPUCLK_MASK 0x1 +#define RT3352_SYSCFG0_CPUCLK_LOW 0x0 +#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1 + +#define RT5350_SYSCFG0_CPUCLK_SHIFT 8 +#define RT5350_SYSCFG0_CPUCLK_MASK 0x3 +#define RT5350_SYSCFG0_CPUCLK_360 0x0 +#define RT5350_SYSCFG0_CPUCLK_320 0x2 +#define RT5350_SYSCFG0_CPUCLK_300 0x3 + +/* multi function gpio pins */ +#define RT305X_GPIO_I2C_SD 1 +#define RT305X_GPIO_I2C_SCLK 2 +#define RT305X_GPIO_SPI_EN 3 +#define RT305X_GPIO_SPI_CLK 4 +/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */ +#define RT305X_GPIO_7 7 +#define RT305X_GPIO_10 10 +#define RT305X_GPIO_14 14 +#define RT305X_GPIO_UART1_TXD 15 +#define RT305X_GPIO_UART1_RXD 16 +#define RT305X_GPIO_JTAG_TDO 17 +#define RT305X_GPIO_JTAG_TDI 18 +#define RT305X_GPIO_MDIO_MDC 22 +#define RT305X_GPIO_MDIO_MDIO 23 +#define RT305X_GPIO_SDRAM_MD16 24 +#define RT305X_GPIO_SDRAM_MD31 39 +#define RT305X_GPIO_GE0_TXD0 40 +#define RT305X_GPIO_GE0_RXCLK 51 + +#define RT305X_GPIO_MODE_I2C BIT(0) +#define RT305X_GPIO_MODE_SPI BIT(1) +#define RT305X_GPIO_MODE_UART0_SHIFT 2 +#define RT305X_GPIO_MODE_UART0_MASK 0x7 +#define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT) +#define RT305X_GPIO_MODE_UARTF 0x0 +#define RT305X_GPIO_MODE_PCM_UARTF 0x1 +#define RT305X_GPIO_MODE_PCM_I2S 0x2 +#define RT305X_GPIO_MODE_I2S_UARTF 0x3 +#define RT305X_GPIO_MODE_PCM_GPIO 0x4 +#define RT305X_GPIO_MODE_GPIO_UARTF 0x5 +#define RT305X_GPIO_MODE_GPIO_I2S 0x6 +#define RT305X_GPIO_MODE_GPIO 0x7 +#define RT305X_GPIO_MODE_UART1 BIT(5) +#define RT305X_GPIO_MODE_JTAG BIT(6) +#define RT305X_GPIO_MODE_MDIO BIT(7) +#define RT305X_GPIO_MODE_SDRAM BIT(8) +#define RT305X_GPIO_MODE_RGMII BIT(9) + +#endif diff --git a/arch/mips/include/asm/mach-pnx8550/war.h b/arch/mips/include/asm/mach-ralink/war.h index de8894c..a7b712c 100644 --- a/arch/mips/include/asm/mach-pnx8550/war.h +++ b/arch/mips/include/asm/mach-ralink/war.h @@ -5,8 +5,8 @@ * * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> */ -#ifndef __ASM_MIPS_MACH_PNX8550_WAR_H -#define __ASM_MIPS_MACH_PNX8550_WAR_H +#ifndef __ASM_MACH_RALINK_WAR_H +#define __ASM_MACH_RALINK_WAR_H #define R4600_V1_INDEX_ICACHEOP_WAR 0 #define R4600_V1_HIT_CACHEOP_WAR 0 @@ -17,8 +17,9 @@ #define MIPS4K_ICACHE_REFILL_WAR 0 #define MIPS_CACHE_SYNC_WAR 0 #define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 #define ICACHE_REFILLS_WORKAROUND_WAR 0 #define R10000_LLSC_WAR 0 #define MIPS34K_MISSED_ITLB_WAR 0 -#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */ +#endif /* __ASM_MACH_RALINK_WAR_H */ diff --git a/arch/mips/include/asm/mach-rc32434/ddr.h b/arch/mips/include/asm/mach-rc32434/ddr.h index 291e2cf..e1cad0c 100644 --- a/arch/mips/include/asm/mach-rc32434/ddr.h +++ b/arch/mips/include/asm/mach-rc32434/ddr.h @@ -138,4 +138,4 @@ struct ddr_ram { #define RC32434_DLLED_DBE_BIT 0 #define RC32434_DLLED_DTE_BIT 1 -#endif /* _ASM_RC32434_DDR_H_ */ +#endif /* _ASM_RC32434_DDR_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/dma.h b/arch/mips/include/asm/mach-rc32434/dma.h index 5f898b5..4322191 100644 --- a/arch/mips/include/asm/mach-rc32434/dma.h +++ b/arch/mips/include/asm/mach-rc32434/dma.h @@ -5,7 +5,7 @@ * DMA register definition. * * Author : ryan.holmQVist@idt.com - * Date : 20011005 + * Date : 20011005 */ #ifndef __ASM_RC32434_DMA_H @@ -71,10 +71,10 @@ struct dma_reg { #define DMA_CHAN_DONE_BIT (1 << 1) #define DMA_CHAN_MODE_BIT (1 << 2) #define DMA_CHAN_MODE_MSK 0x0000000c -#define DMA_CHAN_MODE_AUTO 0 -#define DMA_CHAN_MODE_BURST 1 -#define DMA_CHAN_MODE_XFRT 2 -#define DMA_CHAN_MODE_RSVD 3 +#define DMA_CHAN_MODE_AUTO 0 +#define DMA_CHAN_MODE_BURST 1 +#define DMA_CHAN_MODE_XFRT 2 +#define DMA_CHAN_MODE_RSVD 3 #define DMA_CHAN_ACT_BIT (1 << 4) /* DMA status registers */ @@ -100,4 +100,4 @@ struct dma_channel { struct dma_reg ch[DMA_CHAN_COUNT]; }; -#endif /* __ASM_RC32434_DMA_H */ +#endif /* __ASM_RC32434_DMA_H */ diff --git a/arch/mips/include/asm/mach-rc32434/dma_v.h b/arch/mips/include/asm/mach-rc32434/dma_v.h index 173a9f9..28c5406 100644 --- a/arch/mips/include/asm/mach-rc32434/dma_v.h +++ b/arch/mips/include/asm/mach-rc32434/dma_v.h @@ -5,7 +5,7 @@ * DMA register definition. * * Author : ryan.holmQVist@idt.com - * Date : 20011005 + * Date : 20011005 */ #ifndef _ASM_RC32434_DMA_V_H_ @@ -49,4 +49,4 @@ static inline void rc32434_chain_dma(struct dma_reg *ch, u32 dma_addr) __raw_writel(dma_addr, &ch->dmandptr); } -#endif /* _ASM_RC32434_DMA_V_H_ */ +#endif /* _ASM_RC32434_DMA_V_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/eth.h b/arch/mips/include/asm/mach-rc32434/eth.h index a25cbc5..c2645fa 100644 --- a/arch/mips/include/asm/mach-rc32434/eth.h +++ b/arch/mips/include/asm/mach-rc32434/eth.h @@ -26,8 +26,8 @@ * */ -#ifndef __ASM_RC32434_ETH_H -#define __ASM_RC32434_ETH_H +#ifndef __ASM_RC32434_ETH_H +#define __ASM_RC32434_ETH_H #define ETH0_BASE_ADDR 0x18060000 @@ -217,4 +217,4 @@ struct eth_regs { #define ETH_TX_LE (1 << 16) #define ETH_TX_CC 0x001E0000 -#endif /* __ASM_RC32434_ETH_H */ +#endif /* __ASM_RC32434_ETH_H */ diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h index 12ee8d5..4dee0a3 100644 --- a/arch/mips/include/asm/mach-rc32434/gpio.h +++ b/arch/mips/include/asm/mach-rc32434/gpio.h @@ -5,7 +5,7 @@ * GPIO register definition. * * Author : ryan.holmQVist@idt.com - * Date : 20011005 + * Date : 20011005 * Copyright (C) 2001, 2002 Ryan Holm <ryan.holmQVist@idt.com> * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> */ @@ -26,9 +26,9 @@ #define irq_to_gpio(irq) (irq - (8 + 4 * 32)) struct rb532_gpio_reg { - u32 gpiofunc; /* GPIO Function Register + u32 gpiofunc; /* GPIO Function Register * gpiofunc[x]==0 bit = gpio - * func[x]==1 bit = altfunc + * func[x]==1 bit = altfunc */ u32 gpiocfg; /* GPIO Configuration Register * gpiocfg[x]==0 bit = input diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h index 023a5b10..b76dec9 100644 --- a/arch/mips/include/asm/mach-rc32434/irq.h +++ b/arch/mips/include/asm/mach-rc32434/irq.h @@ -1,7 +1,7 @@ #ifndef __ASM_RC32434_IRQ_H #define __ASM_RC32434_IRQ_H -#define NR_IRQS 256 +#define NR_IRQS 256 #include <asm/mach-generic/irq.h> #include <asm/mach-rc32434/rb.h> @@ -25,12 +25,12 @@ #define UART0_IRQ (GROUP3_IRQ_BASE + 0) -#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0) -#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1) -#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) -#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) +#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0) +#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1) +#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9) +#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10) #define GPIO_MAPPED_IRQ_BASE GROUP4_IRQ_BASE #define GPIO_MAPPED_IRQ_GROUP 4 -#endif /* __ASM_RC32434_IRQ_H */ +#endif /* __ASM_RC32434_IRQ_H */ diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h index 410638f..6f40d15 100644 --- a/arch/mips/include/asm/mach-rc32434/pci.h +++ b/arch/mips/include/asm/mach-rc32434/pci.h @@ -151,11 +151,11 @@ struct pci_msu { #define PCI_CFGA_REG_PBA2 (0x18 >> 2) /* use PCIPBA_ */ #define PCI_CFGA_REG_PBA3 (0x1c >> 2) /* use PCIPBA_ */ #define PCI_CFGA_REG_SUBSYS (0x2c >> 2) /* use PCFGSS_ */ -#define PCI_CFGA_REG_3C (0x3C >> 2) /* use PCFG3C_ */ +#define PCI_CFGA_REG_3C (0x3C >> 2) /* use PCFG3C_ */ #define PCI_CFGA_REG_PBBA0C (0x44 >> 2) /* use PCIPBAC_ */ -#define PCI_CFGA_REG_PBA0M (0x48 >> 2) +#define PCI_CFGA_REG_PBA0M (0x48 >> 2) #define PCI_CFGA_REG_PBA1C (0x4c >> 2) /* use PCIPBAC_ */ -#define PCI_CFGA_REG_PBA1M (0x50 >> 2) +#define PCI_CFGA_REG_PBA1M (0x50 >> 2) #define PCI_CFGA_REG_PBA2C (0x54 >> 2) /* use PCIPBAC_ */ #define PCI_CFGA_REG_PBA2M (0x58 >> 2) #define PCI_CFGA_REG_PBA3C (0x5c >> 2) /* use PCIPBAC_ */ @@ -164,9 +164,9 @@ struct pci_msu { #define PCI_CFGA_FUNC_BIT 8 #define PCI_CFGA_FUNC 0x00000700 #define PCI_CFGA_DEV_BIT 11 -#define PCI_CFGA_DEV 0x0000f800 -#define PCI_CFGA_DEV_INTERN 0 -#define PCI_CFGA_BUS_BIT 16 +#define PCI_CFGA_DEV 0x0000f800 +#define PCI_CFGA_DEV_INTERN 0 +#define PCI_CFGA_BUS_BIT 16 #define PCI CFGA_BUS 0x00ff0000 #define PCI_CFGA_BUS_TYPE0 0 #define PCI_CFGA_EN (1 << 31) @@ -201,13 +201,13 @@ struct pci_msu { #define PCI_PBAC_P (1 << 1) #define PCI_PBAC_SIZE_BIT 2 #define PCI_PBAC_SIZE 0x0000007c -#define PCI_PBAC_SB (1 << 7) -#define PCI_PBAC_PP (1 << 8) +#define PCI_PBAC_SB (1 << 7) +#define PCI_PBAC_PP (1 << 8) #define PCI_PBAC_MR_BIT 9 #define PCI_PBAC_MR 0x00000600 #define PCI_PBAC_MR_RD 0 #define PCI_PBAC_MR_RD_LINE 1 -#define PCI_PBAC_MR_RD_MULT 2 +#define PCI_PBAC_MR_RD_MULT 2 #define PCI_PBAC_MRL (1 << 11) #define PCI_PBAC_MRM (1 << 12) #define PCI_PBAC_TRP (1 << 13) @@ -227,14 +227,14 @@ struct pci_msu { */ #define PCI_LBAC_MSI (1 << 0) -#define PCI_LBAC_MSI_MEM 0 -#define PCI_LBAC_MSI_IO 1 +#define PCI_LBAC_MSI_MEM 0 +#define PCI_LBAC_MSI_IO 1 #define PCI_LBAC_SIZE_BIT 2 #define PCI_LBAC_SIZE 0x0000007c #define PCI_LBAC_SB (1 << 7) #define PCI_LBAC_RT (1 << 8) -#define PCI_LBAC_RT_NO_PREF 0 -#define PCI_LBAC_RT_PREF 1 +#define PCI_LBAC_RT_NO_PREF 0 +#define PCI_LBAC_RT_PREF 1 /* * PCI Local Base Address [0|1|2|3] Mapping Register @@ -279,16 +279,16 @@ struct pci_msu { #define PCI_DMAD_PT 0x00c00000 /* preferred transaction field */ /* These are for reads (DMA channel 8) */ #define PCI_DMAD_DEVCMD_MR 0 /* memory read */ -#define PCI_DMAD_DEVCMD_MRL 1 /* memory read line */ -#define PCI_DMAD_DEVCMD_MRM 2 /* memory read multiple */ -#define PCI_DMAD_DEVCMD_IOR 3 /* I/O read */ +#define PCI_DMAD_DEVCMD_MRL 1 /* memory read line */ +#define PCI_DMAD_DEVCMD_MRM 2 /* memory read multiple */ +#define PCI_DMAD_DEVCMD_IOR 3 /* I/O read */ /* These are for writes (DMA channel 9) */ #define PCI_DMAD_DEVCMD_MW 0 /* memory write */ -#define PCI_DMAD_DEVCMD_MWI 1 /* memory write invalidate */ -#define PCI_DMAD_DEVCMD_IOW 3 /* I/O write */ +#define PCI_DMAD_DEVCMD_MWI 1 /* memory write invalidate */ +#define PCI_DMAD_DEVCMD_IOW 3 /* I/O write */ /* Swap byte field applies to both DMA channel 8 and 9 */ -#define PCI_DMAD_SB (1 << 24) /* swap byte field */ +#define PCI_DMAD_SB (1 << 24) /* swap byte field */ /* @@ -309,7 +309,7 @@ struct pci_msu { #define PCI_MSU_M1 (1 << 1) #define PCI_MSU_DB (1 << 2) -#define PCI_MSG_ADDR 0xB8088010 +#define PCI_MSG_ADDR 0xB8088010 #define PCI0_ADDR 0xB8080000 #define rc32434_pci ((struct pci_reg *) PCI0_ADDR) #define rc32434_pci_msg ((struct pci_msu *) PCI_MSG_ADDR) @@ -331,9 +331,9 @@ struct pci_msu { #define PCILBA_SIZE_MASK 0x1F #define SIZE_256MB 0x1C #define SIZE_128MB 0x1B -#define SIZE_64MB 0x1A +#define SIZE_64MB 0x1A #define SIZE_32MB 0x19 -#define SIZE_16MB 0x18 +#define SIZE_16MB 0x18 #define SIZE_4MB 0x16 #define SIZE_2MB 0x15 #define SIZE_1MB 0x14 @@ -363,7 +363,7 @@ struct pci_msu { #define KORINA_CONFIG23_ADDR 0x8000005C #define KORINA_CONFIG24_ADDR 0x80000060 #define KORINA_CONFIG25_ADDR 0x80000064 -#define KORINA_CMD (PCI_CFG04_CMD_IO_ENA | \ +#define KORINA_CMD (PCI_CFG04_CMD_IO_ENA | \ PCI_CFG04_CMD_MEM_ENA | \ PCI_CFG04_CMD_BM_ENA | \ PCI_CFG04_CMD_MW_INV | \ @@ -401,8 +401,8 @@ struct pci_msu { #define KORINA_BAR3 0x48000008 /* Spare 128 MB Memory */ #define KORINA_CNFG4 KORINA_BAR0 -#define KORINA_CNFG5 KORINA_BAR1 -#define KORINA_CNFG6 KORINA_BAR2 +#define KORINA_CNFG5 KORINA_BAR1 +#define KORINA_CNFG6 KORINA_BAR2 #define KORINA_CNFG7 KORINA_BAR3 #define KORINA_SUBSYS_VENDOR_ID 0x011d @@ -410,20 +410,20 @@ struct pci_msu { #define KORINA_CNFG8 0 #define KORINA_CNFG9 0 #define KORINA_CNFG10 0 -#define KORINA_CNFG11 ((KORINA_SUBSYS_VENDOR_ID<<16) | \ +#define KORINA_CNFG11 ((KORINA_SUBSYS_VENDOR_ID<<16) | \ KORINA_SUBSYSTEM_ID) #define KORINA_INT_LINE 1 #define KORINA_INT_PIN 1 #define KORINA_MIN_GNT 8 #define KORINA_MAX_LAT 0x38 #define KORINA_CNFG12 0 -#define KORINA_CNFG13 0 +#define KORINA_CNFG13 0 #define KORINA_CNFG14 0 #define KORINA_CNFG15 ((KORINA_MAX_LAT<<24) | \ (KORINA_MIN_GNT<<16) | \ (KORINA_INT_PIN<<8) | \ KORINA_INT_LINE) -#define KORINA_RETRY_LIMIT 0x80 +#define KORINA_RETRY_LIMIT 0x80 #define KORINA_TRDY_LIMIT 0x80 #define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \ KORINA_TRDY_LIMIT) @@ -475,7 +475,7 @@ struct pci_msu { #define KORINA_PBA3M 0 #define KORINA_CNFG24 KORINA_PBA3M -#define PCITC_DTIMER_VAL 8 +#define PCITC_DTIMER_VAL 8 #define PCITC_RTIMER_VAL 0x10 -#endif /* __ASM_RC32434_PCI_H */ +#endif /* __ASM_RC32434_PCI_H */ diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h index 6dc5f8d..aac8ce8 100644 --- a/arch/mips/include/asm/mach-rc32434/rb.h +++ b/arch/mips/include/asm/mach-rc32434/rb.h @@ -18,7 +18,7 @@ #include <linux/genhd.h> #define REGBASE 0x18000000 -#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE)) +#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE)) #define UART0BASE 0x58000 #define RST (1 << 15) #define DEV0BASE 0x010000 @@ -80,10 +80,10 @@ struct cf_device { struct mpmc_device { unsigned char state; spinlock_t lock; - void __iomem *base; + void __iomem *base; }; extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask); extern unsigned char get_latch_u5(void); -#endif /* __ASM_RC32434_RB_H */ +#endif /* __ASM_RC32434_RB_H */ diff --git a/arch/mips/include/asm/mach-rc32434/rc32434.h b/arch/mips/include/asm/mach-rc32434/rc32434.h index fce25d4..02fd32b 100644 --- a/arch/mips/include/asm/mach-rc32434/rc32434.h +++ b/arch/mips/include/asm/mach-rc32434/rc32434.h @@ -16,4 +16,4 @@ static inline void rc32434_sync(void) __asm__ volatile ("sync"); } -#endif /* _ASM_RC32434_RC32434_H_ */ +#endif /* _ASM_RC32434_RC32434_H_ */ diff --git a/arch/mips/include/asm/mach-rc32434/timer.h b/arch/mips/include/asm/mach-rc32434/timer.h index e49b1d5..cda26bb9 100644 --- a/arch/mips/include/asm/mach-rc32434/timer.h +++ b/arch/mips/include/asm/mach-rc32434/timer.h @@ -51,15 +51,15 @@ struct timer { #define RC32434_CTC_TO_BIT 1 /* Real time clock registers */ -#define RC32434_RTC_MSK(x) BIT_TO_MASK(x) -#define RC32434_RTC_CE_BIT 0 -#define RC32434_RTC_TO_BIT 1 -#define RC32434_RTC_RQE_BIT 2 +#define RC32434_RTC_MSK(x) BIT_TO_MASK(x) +#define RC32434_RTC_CE_BIT 0 +#define RC32434_RTC_TO_BIT 1 +#define RC32434_RTC_RQE_BIT 2 /* Counter registers */ -#define RC32434_RCOUNT_BIT 0 -#define RC32434_RCOUNT_MSK 0x0000ffff -#define RC32434_RCOMP_BIT 0 -#define RC32434_RCOMP_MSK 0x0000ffff +#define RC32434_RCOUNT_BIT 0 +#define RC32434_RCOUNT_MSK 0x0000ffff +#define RC32434_RCOMP_BIT 0 +#define RC32434_RCOMP_MSK 0x0000ffff -#endif /* __ASM_RC32434_TIMER_H */ +#endif /* __ASM_RC32434_TIMER_H */ diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h index 7f3e3f9..d9c8284 100644 --- a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h @@ -23,8 +23,8 @@ /* #define cpu_has_watch ? */ #define cpu_has_divec 1 #define cpu_has_vce 0 -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ /* #define cpu_has_prefetch ? */ #define cpu_has_mcheck 1 /* #define cpu_has_ejtag ? */ @@ -53,8 +53,8 @@ /* #define cpu_has_watch ? */ #define cpu_has_divec 1 #define cpu_has_vce 0 -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ /* #define cpu_has_prefetch ? */ #define cpu_has_mcheck 1 /* #define cpu_has_ejtag ? */ diff --git a/arch/mips/include/asm/mach-sead3/irq.h b/arch/mips/include/asm/mach-sead3/irq.h index 652ea4c..5d154cf 100644 --- a/arch/mips/include/asm/mach-sead3/irq.h +++ b/arch/mips/include/asm/mach-sead3/irq.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_MIPS_IRQ_H #define __ASM_MACH_MIPS_IRQ_H -#define NR_IRQS 256 +#define NR_IRQS 256 #include_next <irq.h> diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h index 176f5b3..0a227d4 100644 --- a/arch/mips/include/asm/mach-sibyte/war.h +++ b/arch/mips/include/asm/mach-sibyte/war.h @@ -21,12 +21,12 @@ extern int sb1250_m3_workaround_needed(void); #endif #define BCM1250_M3_WAR sb1250_m3_workaround_needed() -#define SIBYTE_1956_WAR 1 +#define SIBYTE_1956_WAR 1 #else #define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 +#define SIBYTE_1956_WAR 0 #endif diff --git a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h index 83746b8..00fa368 100644 --- a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h +++ b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h @@ -1,6 +1,6 @@ /* * This is a direct copy of the ev96100.h file, with a global - * search and replace. The numbers are the same. + * search and replace. The numbers are the same. * * The reason I'm duplicating this is so that the 64120/96100 * defines won't be confusing in the source code. @@ -11,11 +11,11 @@ /* * This is the CPU physical memory map of PPMC Board: * - * 0x00000000-0x03FFFFFF - 64MB SDRAM (SCS[0]#) - * 0x1C000000-0x1C000000 - LED (CS0) - * 0x1C800000-0x1C800007 - UART 16550 port (CS1) - * 0x1F000000-0x1F000000 - MailBox (CS3) - * 0x1FC00000-0x20000000 - 4MB Flash (BOOT CS) + * 0x00000000-0x03FFFFFF - 64MB SDRAM (SCS[0]#) + * 0x1C000000-0x1C000000 - LED (CS0) + * 0x1C800000-0x1C800007 - UART 16550 port (CS1) + * 0x1F000000-0x1F000000 - MailBox (CS3) + * 0x1FC00000-0x20000000 - 4MB Flash (BOOT CS) */ #define WRPPMC_SDRAM_SCS0_BASE 0x00000000 @@ -39,8 +39,8 @@ * * NOTE: We only have PCI_0 hose interface */ -#define GT_PCI_MEM_BASE 0x13000000UL -#define GT_PCI_MEM_SIZE 0x02000000UL +#define GT_PCI_MEM_BASE 0x13000000UL +#define GT_PCI_MEM_SIZE 0x02000000UL #define GT_PCI_IO_BASE 0x11000000UL #define GT_PCI_IO_SIZE 0x02000000UL diff --git a/arch/mips/include/asm/mc146818-time.h b/arch/mips/include/asm/mc146818-time.h index 4a08dbe..9e1ad26 100644 --- a/arch/mips/include/asm/mc146818-time.h +++ b/arch/mips/include/asm/mc146818-time.h @@ -26,7 +26,7 @@ * MC146818A or Dallas DS12887 data sheet for details. * * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you'll only notice that after reboot! + * sets the minutes. Usually you'll only notice that after reboot! */ static inline int mc146818_set_rtc_mmss(unsigned long nowtime) { @@ -77,7 +77,7 @@ static inline int mc146818_set_rtc_mmss(unsigned long nowtime) * battery and quartz) will not reset the oscillator and will not * update precisely 500 ms later. You won't find this mentioned in * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn + * sheets anyway ... -- Markus Kuhn */ CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h index d14e2ad..b2048d1 100644 --- a/arch/mips/include/asm/mips-boards/bonito64.h +++ b/arch/mips/include/asm/mips-boards/bonito64.h @@ -41,18 +41,18 @@ extern unsigned long _pcictrl_bonito_pcicfg; #define BONITO_BOOT_BASE 0x1fc00000 #define BONITO_BOOT_SIZE 0x00100000 -#define BONITO_BOOT_TOP (BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1) +#define BONITO_BOOT_TOP (BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1) #define BONITO_FLASH_BASE 0x1c000000 #define BONITO_FLASH_SIZE 0x03000000 #define BONITO_FLASH_TOP (BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1) #define BONITO_SOCKET_BASE 0x1f800000 #define BONITO_SOCKET_SIZE 0x00400000 #define BONITO_SOCKET_TOP (BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1) -#define BONITO_REG_BASE 0x1fe00000 -#define BONITO_REG_SIZE 0x00040000 +#define BONITO_REG_BASE 0x1fe00000 +#define BONITO_REG_SIZE 0x00040000 #define BONITO_REG_TOP (BONITO_REG_BASE+BONITO_REG_SIZE-1) -#define BONITO_DEV_BASE 0x1ff00000 -#define BONITO_DEV_SIZE 0x00100000 +#define BONITO_DEV_BASE 0x1ff00000 +#define BONITO_DEV_SIZE 0x00100000 #define BONITO_DEV_TOP (BONITO_DEV_BASE+BONITO_DEV_SIZE-1) #define BONITO_PCILO_BASE 0x10000000 #define BONITO_PCILO_SIZE 0x0c000000 @@ -79,14 +79,14 @@ extern unsigned long _pcictrl_bonito_pcicfg; /* PCI Configuration Registers */ -#define BONITO_PCI_REG(x) BONITO(BONITO_PCICONFIGBASE + (x)) +#define BONITO_PCI_REG(x) BONITO(BONITO_PCICONFIGBASE + (x)) #define BONITO_PCIDID BONITO_PCI_REG(0x00) #define BONITO_PCICMD BONITO_PCI_REG(0x04) -#define BONITO_PCICLASS BONITO_PCI_REG(0x08) +#define BONITO_PCICLASS BONITO_PCI_REG(0x08) #define BONITO_PCILTIMER BONITO_PCI_REG(0x0c) -#define BONITO_PCIBASE0 BONITO_PCI_REG(0x10) -#define BONITO_PCIBASE1 BONITO_PCI_REG(0x14) -#define BONITO_PCIBASE2 BONITO_PCI_REG(0x18) +#define BONITO_PCIBASE0 BONITO_PCI_REG(0x10) +#define BONITO_PCIBASE1 BONITO_PCI_REG(0x14) +#define BONITO_PCIBASE2 BONITO_PCI_REG(0x18) #define BONITO_PCIEXPRBASE BONITO_PCI_REG(0x30) #define BONITO_PCIINT BONITO_PCI_REG(0x3c) @@ -95,7 +95,7 @@ extern unsigned long _pcictrl_bonito_pcicfg; #define BONITO_PCICMD_MABORT_CLR 0x20000000 #define BONITO_PCICMD_MTABORT_CLR 0x10000000 #define BONITO_PCICMD_TABORT_CLR 0x08000000 -#define BONITO_PCICMD_MPERR_CLR 0x01000000 +#define BONITO_PCICMD_MPERR_CLR 0x01000000 #define BONITO_PCICMD_PERRRESPEN 0x00000040 #define BONITO_PCICMD_ASTEPEN 0x00000080 #define BONITO_PCICMD_SERREN 0x00000100 @@ -139,7 +139,7 @@ extern unsigned long _pcictrl_bonito_pcicfg; /* Other Bonito configuration */ -#define BONITO_BONGENCFG_OFFSET 0x4 +#define BONITO_BONGENCFG_OFFSET 0x4 #define BONITO_BONGENCFG BONITO(BONITO_REGBASE + BONITO_BONGENCFG_OFFSET) #define BONITO_BONGENCFG_DEBUGMODE 0x00000001 @@ -165,7 +165,7 @@ extern unsigned long _pcictrl_bonito_pcicfg; /* 2. IO & IDE configuration */ -#define BONITO_IODEVCFG BONITO(BONITO_REGBASE + 0x08) +#define BONITO_IODEVCFG BONITO(BONITO_REGBASE + 0x08) /* 3. IO & IDE configuration */ @@ -181,33 +181,33 @@ extern unsigned long _pcictrl_bonito_pcicfg; /* GPIO Regs - r/w */ -#define BONITO_GPIODATA_OFFSET 0x1c -#define BONITO_GPIODATA BONITO(BONITO_REGBASE + BONITO_GPIODATA_OFFSET) +#define BONITO_GPIODATA_OFFSET 0x1c +#define BONITO_GPIODATA BONITO(BONITO_REGBASE + BONITO_GPIODATA_OFFSET) #define BONITO_GPIOIE BONITO(BONITO_REGBASE + 0x20) /* ICU Configuration Regs - r/w */ #define BONITO_INTEDGE BONITO(BONITO_REGBASE + 0x24) -#define BONITO_INTSTEER BONITO(BONITO_REGBASE + 0x28) +#define BONITO_INTSTEER BONITO(BONITO_REGBASE + 0x28) #define BONITO_INTPOL BONITO(BONITO_REGBASE + 0x2c) /* ICU Enable Regs - IntEn & IntISR are r/o. */ -#define BONITO_INTENSET BONITO(BONITO_REGBASE + 0x30) -#define BONITO_INTENCLR BONITO(BONITO_REGBASE + 0x34) +#define BONITO_INTENSET BONITO(BONITO_REGBASE + 0x30) +#define BONITO_INTENCLR BONITO(BONITO_REGBASE + 0x34) #define BONITO_INTEN BONITO(BONITO_REGBASE + 0x38) #define BONITO_INTISR BONITO(BONITO_REGBASE + 0x3c) /* PCI mail boxes */ -#define BONITO_PCIMAIL0_OFFSET 0x40 -#define BONITO_PCIMAIL1_OFFSET 0x44 -#define BONITO_PCIMAIL2_OFFSET 0x48 -#define BONITO_PCIMAIL3_OFFSET 0x4c -#define BONITO_PCIMAIL0 BONITO(BONITO_REGBASE + 0x40) -#define BONITO_PCIMAIL1 BONITO(BONITO_REGBASE + 0x44) -#define BONITO_PCIMAIL2 BONITO(BONITO_REGBASE + 0x48) -#define BONITO_PCIMAIL3 BONITO(BONITO_REGBASE + 0x4c) +#define BONITO_PCIMAIL0_OFFSET 0x40 +#define BONITO_PCIMAIL1_OFFSET 0x44 +#define BONITO_PCIMAIL2_OFFSET 0x48 +#define BONITO_PCIMAIL3_OFFSET 0x4c +#define BONITO_PCIMAIL0 BONITO(BONITO_REGBASE + 0x40) +#define BONITO_PCIMAIL1 BONITO(BONITO_REGBASE + 0x44) +#define BONITO_PCIMAIL2 BONITO(BONITO_REGBASE + 0x48) +#define BONITO_PCIMAIL3 BONITO(BONITO_REGBASE + 0x4c) /* 6. PCI cache */ @@ -216,7 +216,7 @@ extern unsigned long _pcictrl_bonito_pcicfg; #define BONITO_PCICACHETAG BONITO(BONITO_REGBASE + 0x54) #define BONITO_PCIBADADDR BONITO(BONITO_REGBASE + 0x58) -#define BONITO_PCIMSTAT BONITO(BONITO_REGBASE + 0x5c) +#define BONITO_PCIMSTAT BONITO(BONITO_REGBASE + 0x5c) /* @@ -228,20 +228,20 @@ extern unsigned long _pcictrl_bonito_pcicfg; #define BONITO_CONFIGBASE 0x000 #define BONITO_BONITOBASE 0x100 -#define BONITO_LDMABASE 0x200 +#define BONITO_LDMABASE 0x200 #define BONITO_COPBASE 0x300 #define BONITO_REG_BLOCKMASK 0x300 -#define BONITO_LDMACTRL BONITO(BONITO_LDMABASE + 0x0) -#define BONITO_LDMASTAT BONITO(BONITO_LDMABASE + 0x0) -#define BONITO_LDMAADDR BONITO(BONITO_LDMABASE + 0x4) +#define BONITO_LDMACTRL BONITO(BONITO_LDMABASE + 0x0) +#define BONITO_LDMASTAT BONITO(BONITO_LDMABASE + 0x0) +#define BONITO_LDMAADDR BONITO(BONITO_LDMABASE + 0x4) #define BONITO_LDMAGO BONITO(BONITO_LDMABASE + 0x8) -#define BONITO_LDMADATA BONITO(BONITO_LDMABASE + 0xc) +#define BONITO_LDMADATA BONITO(BONITO_LDMABASE + 0xc) #define BONITO_COPCTRL BONITO(BONITO_COPBASE + 0x0) #define BONITO_COPSTAT BONITO(BONITO_COPBASE + 0x0) -#define BONITO_COPPADDR BONITO(BONITO_COPBASE + 0x4) -#define BONITO_COPDADDR BONITO(BONITO_COPBASE + 0x8) +#define BONITO_COPPADDR BONITO(BONITO_COPBASE + 0x4) +#define BONITO_COPDADDR BONITO(BONITO_COPBASE + 0x8) #define BONITO_COPGO BONITO(BONITO_COPBASE + 0xc) @@ -257,7 +257,7 @@ extern unsigned long _pcictrl_bonito_pcicfg; #define BONITO_IDECOPGO_DMA_SIZE_SHIFT 0 #define BONITO_IDECOPGO_DMA_WRITE 0x00010000 #define BONITO_IDECOPGO_DMAWCOUNT 0x000f0000 -#define BONITO_IDECOPGO_DMAWCOUNT_SHIFT 16 +#define BONITO_IDECOPGO_DMAWCOUNT_SHIFT 16 #define BONITO_IDECOPCTRL_DMA_STARTBIT 0x80000000 #define BONITO_IDECOPCTRL_DMA_RSTBIT 0x40000000 @@ -291,11 +291,11 @@ extern unsigned long _pcictrl_bonito_pcicfg; #define BONITO_SDCFG_DRAMMODESET 0x00200000 /* --- */ #define BONITO_SDCFG_DRAMEXTREGS 0x00400000 -#define BONITO_SDCFG_DRAMPARITY 0x00800000 +#define BONITO_SDCFG_DRAMPARITY 0x00800000 /* Added by RPF 11-9-00 */ -#define BONITO_SDCFG_DRAMBURSTLEN 0x03000000 -#define BONITO_SDCFG_DRAMBURSTLEN_SHIFT 24 -#define BONITO_SDCFG_DRAMMODESET_DONE 0x80000000 +#define BONITO_SDCFG_DRAMBURSTLEN 0x03000000 +#define BONITO_SDCFG_DRAMBURSTLEN_SHIFT 24 +#define BONITO_SDCFG_DRAMMODESET_DONE 0x80000000 /* --- */ /* PCI Cache - pciCacheCtrl */ @@ -308,7 +308,7 @@ extern unsigned long _pcictrl_bonito_pcicfg; #define BONITO_PCICACHECTRL_IOBCCOH_PRES 0x00000100 #define BONITO_PCICACHECTRL_IOBCCOH_EN 0x00000200 -#define BONITO_PCICACHECTRL_CPUCOH_PRES 0x00000400 +#define BONITO_PCICACHECTRL_CPUCOH_PRES 0x00000400 #define BONITO_PCICACHECTRL_CPUCOH_EN 0x00000800 #define BONITO_IODEVCFG_BUFFBIT_CS0 0x00000001 @@ -343,18 +343,18 @@ extern unsigned long _pcictrl_bonito_pcicfg; /* gpio */ #define BONITO_GPIO_GPIOW 0x000003ff -#define BONITO_GPIO_GPIOW_SHIFT 0 +#define BONITO_GPIO_GPIOW_SHIFT 0 #define BONITO_GPIO_GPIOR 0x01ff0000 -#define BONITO_GPIO_GPIOR_SHIFT 16 +#define BONITO_GPIO_GPIOR_SHIFT 16 #define BONITO_GPIO_GPINR 0xfe000000 -#define BONITO_GPIO_GPINR_SHIFT 25 +#define BONITO_GPIO_GPINR_SHIFT 25 #define BONITO_GPIO_IOW(N) (1<<(BONITO_GPIO_GPIOW_SHIFT+(N))) #define BONITO_GPIO_IOR(N) (1<<(BONITO_GPIO_GPIOR_SHIFT+(N))) #define BONITO_GPIO_INR(N) (1<<(BONITO_GPIO_GPINR_SHIFT+(N))) /* ICU */ #define BONITO_ICU_MBOXES 0x0000000f -#define BONITO_ICU_MBOXES_SHIFT 0 +#define BONITO_ICU_MBOXES_SHIFT 0 #define BONITO_ICU_DMARDY 0x00000010 #define BONITO_ICU_DMAEMPTY 0x00000020 #define BONITO_ICU_COPYRDY 0x00000040 @@ -384,13 +384,13 @@ extern unsigned long _pcictrl_bonito_pcicfg; #define BONITO_PCIMAP_PCIMAP_2 0x00040000 #define BONITO_PCIMAP_WIN(WIN, ADDR) ((((ADDR)>>26) & BONITO_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) -#define BONITO_PCIMAP_WINSIZE (1<<26) +#define BONITO_PCIMAP_WINSIZE (1<<26) #define BONITO_PCIMAP_WINOFFSET(ADDR) ((ADDR) & (BONITO_PCIMAP_WINSIZE - 1)) #define BONITO_PCIMAP_WINBASE(ADDR) ((ADDR) << 26) /* pcimembaseCfg */ -#define BONITO_PCIMEMBASECFG_MASK 0xf0000000 +#define BONITO_PCIMEMBASECFG_MASK 0xf0000000 #define BONITO_PCIMEMBASECFG_MEMBASE0_MASK 0x0000001f #define BONITO_PCIMEMBASECFG_MEMBASE0_MASK_SHIFT 0 #define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS 0x000003e0 @@ -406,21 +406,21 @@ extern unsigned long _pcictrl_bonito_pcicfg; #define BONITO_PCIMEMBASECFG_MEMBASE1_IO 0x00800000 #define BONITO_PCIMEMBASECFG_ASHIFT 23 -#define BONITO_PCIMEMBASECFG_AMASK 0x007fffff +#define BONITO_PCIMEMBASECFG_AMASK 0x007fffff #define BONITO_PCIMEMBASECFGSIZE(WIN, SIZE) (((~((SIZE)-1))>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) #define BONITO_PCIMEMBASECFGBASE(WIN, BASE) (((BASE)>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) #define BONITO_PCIMEMBASECFG_SIZE(WIN, CFG) (((((~(CFG)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)) << (BONITO_PCIMEMBASECFG_ASHIFT - BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) | BONITO_PCIMEMBASECFG_AMASK) -#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) -#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) +#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) +#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) #define BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT) -#define BONITO_PCITOPHYS(WIN, ADDR, CFG) ( \ - (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)))) | \ - (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG)) \ - ) +#define BONITO_PCITOPHYS(WIN, ADDR, CFG) ( \ + (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)))) | \ + (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG)) \ + ) /* PCICmd */ diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h index 6e23ceb..44a09a6 100644 --- a/arch/mips/include/asm/mips-boards/generic.h +++ b/arch/mips/include/asm/mips-boards/generic.h @@ -1,21 +1,14 @@ /* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive * for more details. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * * Defines of the MIPS boards specific address-MAP, registers, etc. + * + * Copyright (C) 2000,2012 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard <carstenl@mips.com> + * Steven J. Hill <sjhill@mips.com> */ #ifndef __ASM_MIPS_BOARDS_GENERIC_H #define __ASM_MIPS_BOARDS_GENERIC_H @@ -27,39 +20,32 @@ /* * Display register base. */ -#define ASCII_DISPLAY_WORD_BASE 0x1f000410 -#define ASCII_DISPLAY_POS_BASE 0x1f000418 - - -/* - * Yamon Prom print address. - */ -#define YAMON_PROM_PRINT_ADDR 0x1fc00504 - +#define ASCII_DISPLAY_WORD_BASE 0x1f000410 +#define ASCII_DISPLAY_POS_BASE 0x1f000418 /* * Reset register. */ -#define SOFTRES_REG 0x1f000500 -#define GORESET 0x42 +#define SOFTRES_REG 0x1f000500 +#define GORESET 0x42 /* * Revision register. */ -#define MIPS_REVISION_REG 0x1fc00010 -#define MIPS_REVISION_CORID_QED_RM5261 0 -#define MIPS_REVISION_CORID_CORE_LV 1 -#define MIPS_REVISION_CORID_BONITO64 2 -#define MIPS_REVISION_CORID_CORE_20K 3 -#define MIPS_REVISION_CORID_CORE_FPGA 4 -#define MIPS_REVISION_CORID_CORE_MSC 5 -#define MIPS_REVISION_CORID_CORE_EMUL 6 -#define MIPS_REVISION_CORID_CORE_FPGA2 7 -#define MIPS_REVISION_CORID_CORE_FPGAR2 8 -#define MIPS_REVISION_CORID_CORE_FPGA3 9 -#define MIPS_REVISION_CORID_CORE_24K 10 -#define MIPS_REVISION_CORID_CORE_FPGA4 11 -#define MIPS_REVISION_CORID_CORE_FPGA5 12 +#define MIPS_REVISION_REG 0x1fc00010 +#define MIPS_REVISION_CORID_QED_RM5261 0 +#define MIPS_REVISION_CORID_CORE_LV 1 +#define MIPS_REVISION_CORID_BONITO64 2 +#define MIPS_REVISION_CORID_CORE_20K 3 +#define MIPS_REVISION_CORID_CORE_FPGA 4 +#define MIPS_REVISION_CORID_CORE_MSC 5 +#define MIPS_REVISION_CORID_CORE_EMUL 6 +#define MIPS_REVISION_CORID_CORE_FPGA2 7 +#define MIPS_REVISION_CORID_CORE_FPGAR2 8 +#define MIPS_REVISION_CORID_CORE_FPGA3 9 +#define MIPS_REVISION_CORID_CORE_24K 10 +#define MIPS_REVISION_CORID_CORE_FPGA4 11 +#define MIPS_REVISION_CORID_CORE_FPGA5 12 /**** Artificial corid defines ****/ /* @@ -87,10 +73,14 @@ extern int mips_revision_sconid; +#ifdef CONFIG_OF +extern struct boot_param_header __dtb_start; +#endif + #ifdef CONFIG_PCI extern void mips_pcibios_init(void); #else #define mips_pcibios_init() do { } while (0) #endif -#endif /* __ASM_MIPS_BOARDS_GENERIC_H */ +#endif /* __ASM_MIPS_BOARDS_GENERIC_H */ diff --git a/arch/mips/include/asm/mips-boards/launch.h b/arch/mips/include/asm/mips-boards/launch.h index d8ae7f9..653477e 100644 --- a/arch/mips/include/asm/mips-boards/launch.h +++ b/arch/mips/include/asm/mips-boards/launch.h @@ -16,11 +16,11 @@ struct cpulaunch { #else #define LOG2CPULAUNCH 5 -#define LAUNCH_PC 0 -#define LAUNCH_GP 4 -#define LAUNCH_SP 8 -#define LAUNCH_A0 12 -#define LAUNCH_FLAGS 28 +#define LAUNCH_PC 0 +#define LAUNCH_GP 4 +#define LAUNCH_SP 8 +#define LAUNCH_A0 12 +#define LAUNCH_FLAGS 28 #endif diff --git a/arch/mips/include/asm/mips-boards/malta.h b/arch/mips/include/asm/mips-boards/malta.h index c189157..722bc88 100644 --- a/arch/mips/include/asm/mips-boards/malta.h +++ b/arch/mips/include/asm/mips-boards/malta.h @@ -33,9 +33,9 @@ * Malta I/O ports base address for the Galileo GT64120 and Algorithmics * Bonito system controllers. */ -#define MALTA_GT_PORT_BASE get_gt_port_base(GT_PCI0IOLD_OFS) -#define MALTA_BONITO_PORT_BASE ((unsigned long)ioremap (0x1fd00000, 0x10000)) -#define MALTA_MSC_PORT_BASE get_msc_port_base(MSC01_PCI_SC2PIOBASL) +#define MALTA_GT_PORT_BASE get_gt_port_base(GT_PCI0IOLD_OFS) +#define MALTA_BONITO_PORT_BASE ((unsigned long)ioremap (0x1fd00000, 0x10000)) +#define MALTA_MSC_PORT_BASE get_msc_port_base(MSC01_PCI_SC2PIOBASL) static inline unsigned long get_gt_port_base(unsigned long reg) { @@ -77,8 +77,8 @@ static inline unsigned long get_msc_port_base(unsigned long reg) /* * Malta RTC-device indirect register access. */ -#define MALTA_RTC_ADR_REG 0x70 -#define MALTA_RTC_DAT_REG 0x71 +#define MALTA_RTC_ADR_REG 0x70 +#define MALTA_RTC_DAT_REG 0x71 /* * Malta SMSC FDC37M817 Super I/O Controller register. diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h index 6692448..e330732 100644 --- a/arch/mips/include/asm/mips-boards/maltaint.h +++ b/arch/mips/include/asm/mips-boards/maltaint.h @@ -4,8 +4,8 @@ * for more details. * * Copyright (C) 2000,2012 MIPS Technologies, Inc. All rights reserved. - * Carsten Langgaard <carstenl@mips.com> - * Steven J. Hill <sjhill@mips.com> + * Carsten Langgaard <carstenl@mips.com> + * Steven J. Hill <sjhill@mips.com> */ #ifndef _MIPS_MALTAINT_H #define _MIPS_MALTAINT_H @@ -24,9 +24,9 @@ #define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0 #define MIPSCPU_INT_MB1 3 #define MIPSCPU_INT_SMI MIPSCPU_INT_MB1 -#define MIPSCPU_INT_IPI0 MIPSCPU_INT_MB1 /* GIC IPI */ +#define MIPSCPU_INT_IPI0 MIPSCPU_INT_MB1 /* GIC IPI */ #define MIPSCPU_INT_MB2 4 -#define MIPSCPU_INT_IPI1 MIPSCPU_INT_MB2 /* GIC IPI */ +#define MIPSCPU_INT_IPI1 MIPSCPU_INT_MB2 /* GIC IPI */ #define MIPSCPU_INT_MB3 5 #define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3 #define MIPSCPU_INT_MB4 6 diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h index 2971d60..a02596c 100644 --- a/arch/mips/include/asm/mips-boards/piix4.h +++ b/arch/mips/include/asm/mips-boards/piix4.h @@ -53,7 +53,7 @@ #define PIIX4_OCW2_SP (0x6 << 5) #define PIIX4_OCW2_NOP (0x2 << 5) -#define PIIX4_OCW2_SEL (0x0 << 3) +#define PIIX4_OCW2_SEL (0x0 << 3) #define PIIX4_OCW2_ILS_0 0 #define PIIX4_OCW2_ILS_1 1 @@ -72,9 +72,9 @@ #define PIIX4_OCW2_ILS_14 6 #define PIIX4_OCW2_ILS_15 7 -#define PIIX4_OCW3_SEL (0x1 << 3) +#define PIIX4_OCW3_SEL (0x1 << 3) -#define PIIX4_OCW3_IRR 0x2 -#define PIIX4_OCW3_ISR 0x3 +#define PIIX4_OCW3_IRR 0x2 +#define PIIX4_OCW3_ISR 0x3 #endif /* __ASM_MIPS_BOARDS_PIIX4_H */ diff --git a/arch/mips/include/asm/mips-boards/prom.h b/arch/mips/include/asm/mips-boards/prom.h index a9db576..e7aed3e 100644 --- a/arch/mips/include/asm/mips-boards/prom.h +++ b/arch/mips/include/asm/mips-boards/prom.h @@ -39,9 +39,9 @@ extern int get_ethernet_addr(char *ethernet_addr); /* Memory descriptor management. */ #define PROM_MAX_PMEMBLOCKS 32 struct prom_pmemblock { - unsigned long base; /* Within KSEG0. */ - unsigned int size; /* In bytes. */ - unsigned int type; /* free or prom memory */ + unsigned long base; /* Within KSEG0. */ + unsigned int size; /* In bytes. */ + unsigned int type; /* free or prom memory */ }; #endif /* !(_MIPS_PROM_H) */ diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h index d634d9a..6b17aaf 100644 --- a/arch/mips/include/asm/mips-boards/sead3int.h +++ b/arch/mips/include/asm/mips-boards/sead3int.h @@ -4,8 +4,8 @@ * for more details. * * Copyright (C) 2000,2012 MIPS Technologies, Inc. All rights reserved. - * Douglas Leung <douglas@mips.com> - * Steven J. Hill <sjhill@mips.com> + * Douglas Leung <douglas@mips.com> + * Steven J. Hill <sjhill@mips.com> */ #ifndef _MIPS_SEAD3INT_H #define _MIPS_SEAD3INT_H diff --git a/arch/mips/include/asm/mips-boards/sim.h b/arch/mips/include/asm/mips-boards/sim.h index acb7c23..b112fdc 100644 --- a/arch/mips/include/asm/mips-boards/sim.h +++ b/arch/mips/include/asm/mips-boards/sim.h @@ -19,18 +19,18 @@ #ifndef _ASM_MIPS_BOARDS_SIM_H #define _ASM_MIPS_BOARDS_SIM_H -#define STATS_ON 1 -#define STATS_OFF 2 -#define STATS_CLEAR 3 -#define STATS_DUMP 4 +#define STATS_ON 1 +#define STATS_OFF 2 +#define STATS_CLEAR 3 +#define STATS_DUMP 4 #define TRACE_ON 5 -#define TRACE_OFF 6 +#define TRACE_OFF 6 #define simcfg(code) \ ({ \ - __asm__ __volatile__( \ - "sltiu $0,$0, %0" \ + __asm__ __volatile__( \ + "sltiu $0,$0, %0" \ ::"i"(code) \ ); \ }) diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h index 5b3cb85..38b7704 100644 --- a/arch/mips/include/asm/mipsmtregs.h +++ b/arch/mips/include/asm/mipsmtregs.h @@ -270,14 +270,14 @@ static inline void ehb(void) #define mftc0(rt,sel) \ ({ \ - unsigned long __res; \ + unsigned long __res; \ \ __asm__ __volatile__( \ " .set push \n" \ " .set mips32r2 \n" \ " .set noat \n" \ - " # mftc0 $1, $" #rt ", " #sel " \n" \ - " .word 0x41000800 | (" #rt " << 16) | " #sel " \n" \ + " # mftc0 $1, $" #rt ", " #sel " \n" \ + " .word 0x41000800 | (" #rt " << 16) | " #sel " \n" \ " move %0, $1 \n" \ " .set pop \n" \ : "=r" (__res)); \ @@ -334,7 +334,7 @@ do { \ " .set noat \n" \ " move $1, %0 \n" \ " # mttc0 %0," #rd ", " #sel " \n" \ - " .word 0x41810000 | (" #rd " << 11) | " #sel " \n" \ + " .word 0x41810000 | (" #rd " << 11) | " #sel " \n" \ " .set pop \n" \ : \ : "r" (v)); \ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 7e4e6f8..12b70c2 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -123,16 +123,16 @@ * Status Register Values */ -#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ -#define FPU_CSR_COND 0x00800000 /* $fcc0 */ -#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ -#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ -#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ -#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ -#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ -#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ -#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ -#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ +#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ +#define FPU_CSR_COND 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ +#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ +#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ +#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ +#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ +#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ +#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ +#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ /* * Bits 18 - 20 of the FPU Status Register will be read as 0, @@ -145,34 +145,34 @@ * E the exception enable * S the sticky/flag bit */ -#define FPU_CSR_ALL_X 0x0003f000 -#define FPU_CSR_UNI_X 0x00020000 -#define FPU_CSR_INV_X 0x00010000 -#define FPU_CSR_DIV_X 0x00008000 -#define FPU_CSR_OVF_X 0x00004000 -#define FPU_CSR_UDF_X 0x00002000 -#define FPU_CSR_INE_X 0x00001000 - -#define FPU_CSR_ALL_E 0x00000f80 -#define FPU_CSR_INV_E 0x00000800 -#define FPU_CSR_DIV_E 0x00000400 -#define FPU_CSR_OVF_E 0x00000200 -#define FPU_CSR_UDF_E 0x00000100 -#define FPU_CSR_INE_E 0x00000080 - -#define FPU_CSR_ALL_S 0x0000007c -#define FPU_CSR_INV_S 0x00000040 -#define FPU_CSR_DIV_S 0x00000020 -#define FPU_CSR_OVF_S 0x00000010 -#define FPU_CSR_UDF_S 0x00000008 -#define FPU_CSR_INE_S 0x00000004 +#define FPU_CSR_ALL_X 0x0003f000 +#define FPU_CSR_UNI_X 0x00020000 +#define FPU_CSR_INV_X 0x00010000 +#define FPU_CSR_DIV_X 0x00008000 +#define FPU_CSR_OVF_X 0x00004000 +#define FPU_CSR_UDF_X 0x00002000 +#define FPU_CSR_INE_X 0x00001000 + +#define FPU_CSR_ALL_E 0x00000f80 +#define FPU_CSR_INV_E 0x00000800 +#define FPU_CSR_DIV_E 0x00000400 +#define FPU_CSR_OVF_E 0x00000200 +#define FPU_CSR_UDF_E 0x00000100 +#define FPU_CSR_INE_E 0x00000080 + +#define FPU_CSR_ALL_S 0x0000007c +#define FPU_CSR_INV_S 0x00000040 +#define FPU_CSR_DIV_S 0x00000020 +#define FPU_CSR_OVF_S 0x00000010 +#define FPU_CSR_UDF_S 0x00000008 +#define FPU_CSR_INE_S 0x00000004 /* Bits 0 and 1 of FPU Status Register specify the rounding mode */ #define FPU_CSR_RM 0x00000003 -#define FPU_CSR_RN 0x0 /* nearest */ -#define FPU_CSR_RZ 0x1 /* towards zero */ -#define FPU_CSR_RU 0x2 /* towards +Infinity */ -#define FPU_CSR_RD 0x3 /* towards -Infinity */ +#define FPU_CSR_RN 0x0 /* nearest */ +#define FPU_CSR_RZ 0x1 /* towards zero */ +#define FPU_CSR_RU 0x2 /* towards +Infinity */ +#define FPU_CSR_RD 0x3 /* towards -Infinity */ /* @@ -214,15 +214,15 @@ * Default page size for a given kernel configuration */ #ifdef CONFIG_PAGE_SIZE_4KB -#define PM_DEFAULT_MASK PM_4K +#define PM_DEFAULT_MASK PM_4K #elif defined(CONFIG_PAGE_SIZE_8KB) -#define PM_DEFAULT_MASK PM_8K +#define PM_DEFAULT_MASK PM_8K #elif defined(CONFIG_PAGE_SIZE_16KB) -#define PM_DEFAULT_MASK PM_16K +#define PM_DEFAULT_MASK PM_16K #elif defined(CONFIG_PAGE_SIZE_32KB) -#define PM_DEFAULT_MASK PM_32K +#define PM_DEFAULT_MASK PM_32K #elif defined(CONFIG_PAGE_SIZE_64KB) -#define PM_DEFAULT_MASK PM_64K +#define PM_DEFAULT_MASK PM_64K #else #error Bad page size configuration! #endif @@ -260,34 +260,34 @@ /* * PageGrain bits */ -#define PG_RIE (_ULCAST_(1) << 31) -#define PG_XIE (_ULCAST_(1) << 30) -#define PG_ELPA (_ULCAST_(1) << 29) -#define PG_ESP (_ULCAST_(1) << 28) +#define PG_RIE (_ULCAST_(1) << 31) +#define PG_XIE (_ULCAST_(1) << 30) +#define PG_ELPA (_ULCAST_(1) << 29) +#define PG_ESP (_ULCAST_(1) << 28) /* * R4x00 interrupt enable / cause bits */ -#define IE_SW0 (_ULCAST_(1) << 8) -#define IE_SW1 (_ULCAST_(1) << 9) -#define IE_IRQ0 (_ULCAST_(1) << 10) -#define IE_IRQ1 (_ULCAST_(1) << 11) -#define IE_IRQ2 (_ULCAST_(1) << 12) -#define IE_IRQ3 (_ULCAST_(1) << 13) -#define IE_IRQ4 (_ULCAST_(1) << 14) -#define IE_IRQ5 (_ULCAST_(1) << 15) +#define IE_SW0 (_ULCAST_(1) << 8) +#define IE_SW1 (_ULCAST_(1) << 9) +#define IE_IRQ0 (_ULCAST_(1) << 10) +#define IE_IRQ1 (_ULCAST_(1) << 11) +#define IE_IRQ2 (_ULCAST_(1) << 12) +#define IE_IRQ3 (_ULCAST_(1) << 13) +#define IE_IRQ4 (_ULCAST_(1) << 14) +#define IE_IRQ5 (_ULCAST_(1) << 15) /* * R4x00 interrupt cause bits */ -#define C_SW0 (_ULCAST_(1) << 8) -#define C_SW1 (_ULCAST_(1) << 9) -#define C_IRQ0 (_ULCAST_(1) << 10) -#define C_IRQ1 (_ULCAST_(1) << 11) -#define C_IRQ2 (_ULCAST_(1) << 12) -#define C_IRQ3 (_ULCAST_(1) << 13) -#define C_IRQ4 (_ULCAST_(1) << 14) -#define C_IRQ5 (_ULCAST_(1) << 15) +#define C_SW0 (_ULCAST_(1) << 8) +#define C_SW1 (_ULCAST_(1) << 9) +#define C_IRQ0 (_ULCAST_(1) << 10) +#define C_IRQ1 (_ULCAST_(1) << 11) +#define C_IRQ2 (_ULCAST_(1) << 12) +#define C_IRQ3 (_ULCAST_(1) << 13) +#define C_IRQ4 (_ULCAST_(1) << 14) +#define C_IRQ5 (_ULCAST_(1) << 15) /* * Bitfields in the R4xx0 cp0 status register @@ -301,7 +301,7 @@ # define KSU_KERNEL 0x00000000 #define ST0_UX 0x00000020 #define ST0_SX 0x00000040 -#define ST0_KX 0x00000080 +#define ST0_KX 0x00000080 #define ST0_DE 0x00010000 #define ST0_CE 0x00020000 @@ -315,7 +315,7 @@ /* * Bitfields in the R[23]000 cp0 status register. */ -#define ST0_IEC 0x00000001 +#define ST0_IEC 0x00000001 #define ST0_KUC 0x00000002 #define ST0_IEP 0x00000004 #define ST0_KUP 0x00000008 @@ -329,7 +329,7 @@ /* * Bits specific to the R4640/R4650 */ -#define ST0_UM (_ULCAST_(1) << 4) +#define ST0_UM (_ULCAST_(1) << 4) #define ST0_IL (_ULCAST_(1) << 23) #define ST0_DL (_ULCAST_(1) << 24) @@ -343,22 +343,22 @@ */ #define TX39_CONF_ICS_SHIFT 19 #define TX39_CONF_ICS_MASK 0x00380000 -#define TX39_CONF_ICS_1KB 0x00000000 -#define TX39_CONF_ICS_2KB 0x00080000 -#define TX39_CONF_ICS_4KB 0x00100000 -#define TX39_CONF_ICS_8KB 0x00180000 -#define TX39_CONF_ICS_16KB 0x00200000 +#define TX39_CONF_ICS_1KB 0x00000000 +#define TX39_CONF_ICS_2KB 0x00080000 +#define TX39_CONF_ICS_4KB 0x00100000 +#define TX39_CONF_ICS_8KB 0x00180000 +#define TX39_CONF_ICS_16KB 0x00200000 #define TX39_CONF_DCS_SHIFT 16 #define TX39_CONF_DCS_MASK 0x00070000 -#define TX39_CONF_DCS_1KB 0x00000000 -#define TX39_CONF_DCS_2KB 0x00010000 -#define TX39_CONF_DCS_4KB 0x00020000 -#define TX39_CONF_DCS_8KB 0x00030000 -#define TX39_CONF_DCS_16KB 0x00040000 - -#define TX39_CONF_CWFON 0x00004000 -#define TX39_CONF_WBON 0x00002000 +#define TX39_CONF_DCS_1KB 0x00000000 +#define TX39_CONF_DCS_2KB 0x00010000 +#define TX39_CONF_DCS_4KB 0x00020000 +#define TX39_CONF_DCS_8KB 0x00030000 +#define TX39_CONF_DCS_16KB 0x00040000 + +#define TX39_CONF_CWFON 0x00004000 +#define TX39_CONF_WBON 0x00002000 #define TX39_CONF_RF_SHIFT 10 #define TX39_CONF_RF_MASK 0x00000c00 #define TX39_CONF_DOZE 0x00000200 @@ -375,38 +375,38 @@ * Status register bits available in all MIPS CPUs. */ #define ST0_IM 0x0000ff00 -#define STATUSB_IP0 8 -#define STATUSF_IP0 (_ULCAST_(1) << 8) -#define STATUSB_IP1 9 -#define STATUSF_IP1 (_ULCAST_(1) << 9) -#define STATUSB_IP2 10 -#define STATUSF_IP2 (_ULCAST_(1) << 10) -#define STATUSB_IP3 11 -#define STATUSF_IP3 (_ULCAST_(1) << 11) -#define STATUSB_IP4 12 -#define STATUSF_IP4 (_ULCAST_(1) << 12) -#define STATUSB_IP5 13 -#define STATUSF_IP5 (_ULCAST_(1) << 13) -#define STATUSB_IP6 14 -#define STATUSF_IP6 (_ULCAST_(1) << 14) -#define STATUSB_IP7 15 -#define STATUSF_IP7 (_ULCAST_(1) << 15) -#define STATUSB_IP8 0 -#define STATUSF_IP8 (_ULCAST_(1) << 0) -#define STATUSB_IP9 1 -#define STATUSF_IP9 (_ULCAST_(1) << 1) -#define STATUSB_IP10 2 -#define STATUSF_IP10 (_ULCAST_(1) << 2) -#define STATUSB_IP11 3 -#define STATUSF_IP11 (_ULCAST_(1) << 3) -#define STATUSB_IP12 4 -#define STATUSF_IP12 (_ULCAST_(1) << 4) -#define STATUSB_IP13 5 -#define STATUSF_IP13 (_ULCAST_(1) << 5) -#define STATUSB_IP14 6 -#define STATUSF_IP14 (_ULCAST_(1) << 6) -#define STATUSB_IP15 7 -#define STATUSF_IP15 (_ULCAST_(1) << 7) +#define STATUSB_IP0 8 +#define STATUSF_IP0 (_ULCAST_(1) << 8) +#define STATUSB_IP1 9 +#define STATUSF_IP1 (_ULCAST_(1) << 9) +#define STATUSB_IP2 10 +#define STATUSF_IP2 (_ULCAST_(1) << 10) +#define STATUSB_IP3 11 +#define STATUSF_IP3 (_ULCAST_(1) << 11) +#define STATUSB_IP4 12 +#define STATUSF_IP4 (_ULCAST_(1) << 12) +#define STATUSB_IP5 13 +#define STATUSF_IP5 (_ULCAST_(1) << 13) +#define STATUSB_IP6 14 +#define STATUSF_IP6 (_ULCAST_(1) << 14) +#define STATUSB_IP7 15 +#define STATUSF_IP7 (_ULCAST_(1) << 15) +#define STATUSB_IP8 0 +#define STATUSF_IP8 (_ULCAST_(1) << 0) +#define STATUSB_IP9 1 +#define STATUSF_IP9 (_ULCAST_(1) << 1) +#define STATUSB_IP10 2 +#define STATUSF_IP10 (_ULCAST_(1) << 2) +#define STATUSB_IP11 3 +#define STATUSF_IP11 (_ULCAST_(1) << 3) +#define STATUSB_IP12 4 +#define STATUSF_IP12 (_ULCAST_(1) << 4) +#define STATUSB_IP13 5 +#define STATUSF_IP13 (_ULCAST_(1) << 5) +#define STATUSB_IP14 6 +#define STATUSF_IP14 (_ULCAST_(1) << 6) +#define STATUSB_IP15 7 +#define STATUSF_IP15 (_ULCAST_(1) << 7) #define ST0_CH 0x00040000 #define ST0_NMI 0x00080000 #define ST0_SR 0x00100000 @@ -436,36 +436,36 @@ * * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. */ -#define CAUSEB_EXCCODE 2 -#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) -#define CAUSEB_IP 8 -#define CAUSEF_IP (_ULCAST_(255) << 8) -#define CAUSEB_IP0 8 -#define CAUSEF_IP0 (_ULCAST_(1) << 8) -#define CAUSEB_IP1 9 -#define CAUSEF_IP1 (_ULCAST_(1) << 9) -#define CAUSEB_IP2 10 -#define CAUSEF_IP2 (_ULCAST_(1) << 10) -#define CAUSEB_IP3 11 -#define CAUSEF_IP3 (_ULCAST_(1) << 11) -#define CAUSEB_IP4 12 -#define CAUSEF_IP4 (_ULCAST_(1) << 12) -#define CAUSEB_IP5 13 -#define CAUSEF_IP5 (_ULCAST_(1) << 13) -#define CAUSEB_IP6 14 -#define CAUSEF_IP6 (_ULCAST_(1) << 14) -#define CAUSEB_IP7 15 -#define CAUSEF_IP7 (_ULCAST_(1) << 15) -#define CAUSEB_IV 23 -#define CAUSEF_IV (_ULCAST_(1) << 23) -#define CAUSEB_PCI 26 -#define CAUSEF_PCI (_ULCAST_(1) << 26) -#define CAUSEB_CE 28 -#define CAUSEF_CE (_ULCAST_(3) << 28) -#define CAUSEB_TI 30 -#define CAUSEF_TI (_ULCAST_(1) << 30) -#define CAUSEB_BD 31 -#define CAUSEF_BD (_ULCAST_(1) << 31) +#define CAUSEB_EXCCODE 2 +#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) +#define CAUSEB_IP 8 +#define CAUSEF_IP (_ULCAST_(255) << 8) +#define CAUSEB_IP0 8 +#define CAUSEF_IP0 (_ULCAST_(1) << 8) +#define CAUSEB_IP1 9 +#define CAUSEF_IP1 (_ULCAST_(1) << 9) +#define CAUSEB_IP2 10 +#define CAUSEF_IP2 (_ULCAST_(1) << 10) +#define CAUSEB_IP3 11 +#define CAUSEF_IP3 (_ULCAST_(1) << 11) +#define CAUSEB_IP4 12 +#define CAUSEF_IP4 (_ULCAST_(1) << 12) +#define CAUSEB_IP5 13 +#define CAUSEF_IP5 (_ULCAST_(1) << 13) +#define CAUSEB_IP6 14 +#define CAUSEF_IP6 (_ULCAST_(1) << 14) +#define CAUSEB_IP7 15 +#define CAUSEF_IP7 (_ULCAST_(1) << 15) +#define CAUSEB_IV 23 +#define CAUSEF_IV (_ULCAST_(1) << 23) +#define CAUSEB_PCI 26 +#define CAUSEF_PCI (_ULCAST_(1) << 26) +#define CAUSEB_CE 28 +#define CAUSEF_CE (_ULCAST_(3) << 28) +#define CAUSEB_TI 30 +#define CAUSEF_TI (_ULCAST_(1) << 30) +#define CAUSEB_BD 31 +#define CAUSEF_BD (_ULCAST_(1) << 31) /* * Bits in the coprocessor 0 config register. @@ -483,11 +483,11 @@ #define CONF_BE (_ULCAST_(1) << 15) /* Bits common to various processors. */ -#define CONF_CU (_ULCAST_(1) << 3) -#define CONF_DB (_ULCAST_(1) << 4) -#define CONF_IB (_ULCAST_(1) << 5) -#define CONF_DC (_ULCAST_(7) << 6) -#define CONF_IC (_ULCAST_(7) << 9) +#define CONF_CU (_ULCAST_(1) << 3) +#define CONF_DB (_ULCAST_(1) << 4) +#define CONF_IB (_ULCAST_(1) << 5) +#define CONF_DC (_ULCAST_(7) << 6) +#define CONF_IC (_ULCAST_(7) << 9) #define CONF_EB (_ULCAST_(1) << 13) #define CONF_EM (_ULCAST_(1) << 14) #define CONF_SM (_ULCAST_(1) << 16) @@ -497,29 +497,29 @@ #define CONF_EC (_ULCAST_(7) << 28) #define CONF_CM (_ULCAST_(1) << 31) -/* Bits specific to the R4xx0. */ +/* Bits specific to the R4xx0. */ #define R4K_CONF_SW (_ULCAST_(1) << 20) #define R4K_CONF_SS (_ULCAST_(1) << 21) #define R4K_CONF_SB (_ULCAST_(3) << 22) -/* Bits specific to the R5000. */ +/* Bits specific to the R5000. */ #define R5K_CONF_SE (_ULCAST_(1) << 12) #define R5K_CONF_SS (_ULCAST_(3) << 20) -/* Bits specific to the RM7000. */ -#define RM7K_CONF_SE (_ULCAST_(1) << 3) +/* Bits specific to the RM7000. */ +#define RM7K_CONF_SE (_ULCAST_(1) << 3) #define RM7K_CONF_TE (_ULCAST_(1) << 12) #define RM7K_CONF_CLK (_ULCAST_(1) << 16) #define RM7K_CONF_TC (_ULCAST_(1) << 17) #define RM7K_CONF_SI (_ULCAST_(3) << 20) #define RM7K_CONF_SC (_ULCAST_(1) << 31) -/* Bits specific to the R10000. */ -#define R10K_CONF_DN (_ULCAST_(3) << 3) -#define R10K_CONF_CT (_ULCAST_(1) << 5) -#define R10K_CONF_PE (_ULCAST_(1) << 6) -#define R10K_CONF_PM (_ULCAST_(3) << 7) -#define R10K_CONF_EC (_ULCAST_(15)<< 9) +/* Bits specific to the R10000. */ +#define R10K_CONF_DN (_ULCAST_(3) << 3) +#define R10K_CONF_CT (_ULCAST_(1) << 5) +#define R10K_CONF_PE (_ULCAST_(1) << 6) +#define R10K_CONF_PM (_ULCAST_(3) << 7) +#define R10K_CONF_EC (_ULCAST_(15)<< 9) #define R10K_CONF_SB (_ULCAST_(1) << 13) #define R10K_CONF_SK (_ULCAST_(1) << 14) #define R10K_CONF_SS (_ULCAST_(7) << 16) @@ -527,14 +527,14 @@ #define R10K_CONF_DC (_ULCAST_(7) << 26) #define R10K_CONF_IC (_ULCAST_(7) << 29) -/* Bits specific to the VR41xx. */ +/* Bits specific to the VR41xx. */ #define VR41_CONF_CS (_ULCAST_(1) << 12) #define VR41_CONF_P4K (_ULCAST_(1) << 13) #define VR41_CONF_BP (_ULCAST_(1) << 16) #define VR41_CONF_M16 (_ULCAST_(1) << 20) #define VR41_CONF_AD (_ULCAST_(1) << 23) -/* Bits specific to the R30xx. */ +/* Bits specific to the R30xx. */ #define R30XX_CONF_FDM (_ULCAST_(1) << 19) #define R30XX_CONF_REV (_ULCAST_(1) << 22) #define R30XX_CONF_AC (_ULCAST_(1) << 23) @@ -551,8 +551,8 @@ #define TX49_CONF_HALT (_ULCAST_(1) << 18) #define TX49_CONF_CWFON (_ULCAST_(1) << 27) -/* Bits specific to the MIPS32/64 PRA. */ -#define MIPS_CONF_MT (_ULCAST_(7) << 7) +/* Bits specific to the MIPS32/64 PRA. */ +#define MIPS_CONF_MT (_ULCAST_(7) << 7) #define MIPS_CONF_AR (_ULCAST_(7) << 10) #define MIPS_CONF_AT (_ULCAST_(3) << 13) #define MIPS_CONF_M (_ULCAST_(1) << 31) @@ -560,14 +560,14 @@ /* * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above. */ -#define MIPS_CONF1_FP (_ULCAST_(1) << 0) -#define MIPS_CONF1_EP (_ULCAST_(1) << 1) -#define MIPS_CONF1_CA (_ULCAST_(1) << 2) -#define MIPS_CONF1_WR (_ULCAST_(1) << 3) -#define MIPS_CONF1_PC (_ULCAST_(1) << 4) -#define MIPS_CONF1_MD (_ULCAST_(1) << 5) -#define MIPS_CONF1_C2 (_ULCAST_(1) << 6) -#define MIPS_CONF1_DA (_ULCAST_(7) << 7) +#define MIPS_CONF1_FP (_ULCAST_(1) << 0) +#define MIPS_CONF1_EP (_ULCAST_(1) << 1) +#define MIPS_CONF1_CA (_ULCAST_(1) << 2) +#define MIPS_CONF1_WR (_ULCAST_(1) << 3) +#define MIPS_CONF1_PC (_ULCAST_(1) << 4) +#define MIPS_CONF1_MD (_ULCAST_(1) << 5) +#define MIPS_CONF1_C2 (_ULCAST_(1) << 6) +#define MIPS_CONF1_DA (_ULCAST_(7) << 7) #define MIPS_CONF1_DL (_ULCAST_(7) << 10) #define MIPS_CONF1_DS (_ULCAST_(7) << 13) #define MIPS_CONF1_IA (_ULCAST_(7) << 16) @@ -575,26 +575,28 @@ #define MIPS_CONF1_IS (_ULCAST_(7) << 22) #define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25) -#define MIPS_CONF2_SA (_ULCAST_(15)<< 0) -#define MIPS_CONF2_SL (_ULCAST_(15)<< 4) -#define MIPS_CONF2_SS (_ULCAST_(15)<< 8) +#define MIPS_CONF2_SA (_ULCAST_(15)<< 0) +#define MIPS_CONF2_SL (_ULCAST_(15)<< 4) +#define MIPS_CONF2_SS (_ULCAST_(15)<< 8) #define MIPS_CONF2_SU (_ULCAST_(15)<< 12) #define MIPS_CONF2_TA (_ULCAST_(15)<< 16) #define MIPS_CONF2_TL (_ULCAST_(15)<< 20) #define MIPS_CONF2_TS (_ULCAST_(15)<< 24) #define MIPS_CONF2_TU (_ULCAST_(7) << 28) -#define MIPS_CONF3_TL (_ULCAST_(1) << 0) -#define MIPS_CONF3_SM (_ULCAST_(1) << 1) -#define MIPS_CONF3_MT (_ULCAST_(1) << 2) -#define MIPS_CONF3_SP (_ULCAST_(1) << 4) -#define MIPS_CONF3_VINT (_ULCAST_(1) << 5) -#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) -#define MIPS_CONF3_LPA (_ULCAST_(1) << 7) +#define MIPS_CONF3_TL (_ULCAST_(1) << 0) +#define MIPS_CONF3_SM (_ULCAST_(1) << 1) +#define MIPS_CONF3_MT (_ULCAST_(1) << 2) +#define MIPS_CONF3_SP (_ULCAST_(1) << 4) +#define MIPS_CONF3_VINT (_ULCAST_(1) << 5) +#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) +#define MIPS_CONF3_LPA (_ULCAST_(1) << 7) #define MIPS_CONF3_DSP (_ULCAST_(1) << 10) #define MIPS_CONF3_DSP2P (_ULCAST_(1) << 11) #define MIPS_CONF3_RXI (_ULCAST_(1) << 12) #define MIPS_CONF3_ULRI (_ULCAST_(1) << 13) +#define MIPS_CONF3_ISA (_ULCAST_(3) << 14) +#define MIPS_CONF3_VZ (_ULCAST_(1) << 23) #define MIPS_CONF4_MMUSIZEEXT (_ULCAST_(255) << 0) #define MIPS_CONF4_MMUEXTDEF (_ULCAST_(3) << 14) @@ -621,7 +623,7 @@ #ifndef __ASSEMBLY__ /* - * Functions to access the R10000 performance counters. These are basically + * Functions to access the R10000 performance counters. These are basically * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit * performance counter number encoded into bits 1 ... 5 of the instruction. * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware @@ -632,13 +634,13 @@ unsigned int __res; \ __asm__ __volatile__( \ "mfpc\t%0, %1" \ - : "=r" (__res) \ + : "=r" (__res) \ : "i" (counter)); \ \ - __res; \ + __res; \ }) -#define write_r10k_perf_cntr(counter,val) \ +#define write_r10k_perf_cntr(counter,val) \ do { \ __asm__ __volatile__( \ "mtpc\t%0, %1" \ @@ -651,13 +653,13 @@ do { \ unsigned int __res; \ __asm__ __volatile__( \ "mfps\t%0, %1" \ - : "=r" (__res) \ + : "=r" (__res) \ : "i" (counter)); \ \ - __res; \ + __res; \ }) -#define write_r10k_perf_cntl(counter,val) \ +#define write_r10k_perf_cntl(counter,val) \ do { \ __asm__ __volatile__( \ "mtps\t%0, %1" \ @@ -847,20 +849,20 @@ do { \ #define write_c0_context(val) __write_ulong_c0_register($4, 0, val) #define read_c0_userlocal() __read_ulong_c0_register($4, 2) -#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) +#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) #define read_c0_pagemask() __read_32bit_c0_register($5, 0) #define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) #define read_c0_pagegrain() __read_32bit_c0_register($5, 1) -#define write_c0_pagegrain(val) __write_32bit_c0_register($5, 1, val) +#define write_c0_pagegrain(val) __write_32bit_c0_register($5, 1, val) #define read_c0_wired() __read_32bit_c0_register($6, 0) #define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) #define read_c0_info() __read_32bit_c0_register($7, 0) -#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ +#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ #define write_c0_cache(val) __write_32bit_c0_register($7, 0, val) #define read_c0_badvaddr() __read_ulong_c0_register($8, 0) @@ -975,7 +977,7 @@ do { \ #define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val) #define read_c0_framemask() __read_32bit_c0_register($21, 0) -#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) +#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) #define read_c0_diag() __read_32bit_c0_register($22, 0) #define write_c0_diag(val) __write_32bit_c0_register($22, 0, val) @@ -1005,27 +1007,27 @@ do { \ * MIPS32 / MIPS64 performance counters */ #define read_c0_perfctrl0() __read_32bit_c0_register($25, 0) -#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) +#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) #define read_c0_perfcntr0() __read_32bit_c0_register($25, 1) -#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) +#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) #define read_c0_perfcntr0_64() __read_64bit_c0_register($25, 1) #define write_c0_perfcntr0_64(val) __write_64bit_c0_register($25, 1, val) #define read_c0_perfctrl1() __read_32bit_c0_register($25, 2) -#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) +#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) #define read_c0_perfcntr1() __read_32bit_c0_register($25, 3) -#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) +#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) #define read_c0_perfcntr1_64() __read_64bit_c0_register($25, 3) #define write_c0_perfcntr1_64(val) __write_64bit_c0_register($25, 3, val) #define read_c0_perfctrl2() __read_32bit_c0_register($25, 4) -#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) +#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) #define read_c0_perfcntr2() __read_32bit_c0_register($25, 5) -#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) +#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) #define read_c0_perfcntr2_64() __read_64bit_c0_register($25, 5) #define write_c0_perfcntr2_64(val) __write_64bit_c0_register($25, 5, val) #define read_c0_perfctrl3() __read_32bit_c0_register($25, 6) -#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) +#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) #define read_c0_perfcntr3() __read_32bit_c0_register($25, 7) -#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) +#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) #define read_c0_perfcntr3_64() __read_64bit_c0_register($25, 7) #define write_c0_perfcntr3_64(val) __write_64bit_c0_register($25, 7, val) @@ -1033,12 +1035,12 @@ do { \ #define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val) #define read_c0_derraddr0() __read_ulong_c0_register($26, 1) -#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) +#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) #define read_c0_cacheerr() __read_32bit_c0_register($27, 0) #define read_c0_derraddr1() __read_ulong_c0_register($27, 1) -#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) +#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) #define read_c0_taglo() __read_32bit_c0_register($28, 0) #define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val) @@ -1083,9 +1085,9 @@ do { \ #define write_c0_cvmctl(val) __write_64bit_c0_register($9, 7, val) #define read_c0_cvmmemctl() __read_64bit_c0_register($11, 7) -#define write_c0_cvmmemctl(val) __write_64bit_c0_register($11, 7, val) +#define write_c0_cvmmemctl(val) __write_64bit_c0_register($11, 7, val) /* - * The cacheerr registers are not standardized. On OCTEON, they are + * The cacheerr registers are not standardized. On OCTEON, they are * 64 bits wide. */ #define read_octeon_c0_icacheerr() __read_64bit_c0_register($27, 0) @@ -1142,48 +1144,42 @@ do { \ /* * Macros to access the floating point coprocessor control registers */ -#define read_32bit_cp1_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tpush\n\t" \ - ".set\treorder\n\t" \ - /* gas fails to assemble cfc1 for some archs (octeon).*/ \ - ".set\tmips1\n\t" \ - "cfc1\t%0,"STR(source)"\n\t" \ - ".set\tpop" \ - : "=r" (__res)); \ - __res;}) +#define read_32bit_cp1_register(source) \ +({ \ + int __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set reorder \n" \ + " # gas fails to assemble cfc1 for some archs, \n" \ + " # like Octeon. \n" \ + " .set mips1 \n" \ + " cfc1 %0,"STR(source)" \n" \ + " .set pop \n" \ + : "=r" (__res)); \ + __res; \ +}) +#ifdef HAVE_AS_DSP #define rddsp(mask) \ ({ \ - unsigned int __res; \ + unsigned int __dspctl; \ \ __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # rddsp $1, %x1 \n" \ - " .word 0x7c000cb8 | (%x1 << 16) \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__res) \ + " rddsp %0, %x1 \n" \ + : "=r" (__dspctl) \ : "i" (mask)); \ - __res; \ + __dspctl; \ }) #define wrdsp(val, mask) \ do { \ __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # wrdsp $1, %x1 \n" \ - " .word 0x7c2004f8 | (%x1 << 11) \n" \ - " .set pop \n" \ - : \ + " wrdsp %0, %x1 \n" \ + : \ : "r" (val), "i" (mask)); \ } while (0) -#if 0 /* Need DSP ASE capable assembler ... */ #define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;}) #define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;}) #define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;}) @@ -1206,230 +1202,177 @@ do { \ #else -#define mfhi0() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac0 \n" \ - " .word 0x00000810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mfhi1() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac1 \n" \ - " .word 0x00200810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mfhi2() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac2 \n" \ - " .word 0x00400810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mfhi3() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac3 \n" \ - " .word 0x00600810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mflo0() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac0 \n" \ - " .word 0x00000812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mflo1() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac1 \n" \ - " .word 0x00200812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mflo2() \ -({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac2 \n" \ - " .word 0x00400812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mflo3() \ +#ifdef CONFIG_CPU_MICROMIPS +#define rddsp(mask) \ ({ \ - unsigned long __treg; \ + unsigned int __res; \ \ __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac3 \n" \ - " .word 0x00600812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ -}) - -#define mthi0(x) \ -do { \ - __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ - " move $1, %0 \n" \ - " # mthi $1, $ac0 \n" \ - " .word 0x00200011 \n" \ + " # rddsp $1, %x1 \n" \ + " .hword ((0x0020067c | (%x1 << 14)) >> 16) \n" \ + " .hword ((0x0020067c | (%x1 << 14)) & 0xffff) \n" \ + " move %0, $1 \n" \ " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) + : "=r" (__res) \ + : "i" (mask)); \ + __res; \ +}) -#define mthi1(x) \ +#define wrdsp(val, mask) \ do { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " move $1, %0 \n" \ - " # mthi $1, $ac1 \n" \ - " .word 0x00200811 \n" \ + " # wrdsp $1, %x1 \n" \ + " .hword ((0x0020167c | (%x1 << 14)) >> 16) \n" \ + " .hword ((0x0020167c | (%x1 << 14)) & 0xffff) \n" \ " .set pop \n" \ : \ - : "r" (x)); \ + : "r" (val), "i" (mask)); \ } while (0) -#define mthi2(x) \ -do { \ +#define _umips_dsp_mfxxx(ins) \ +({ \ + unsigned long __treg; \ + \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ - " move $1, %0 \n" \ - " # mthi $1, $ac2 \n" \ - " .word 0x00201011 \n" \ + " .hword 0x0001 \n" \ + " .hword %x1 \n" \ + " move %0, $1 \n" \ " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) + : "=r" (__treg) \ + : "i" (ins)); \ + __treg; \ +}) -#define mthi3(x) \ +#define _umips_dsp_mtxxx(val, ins) \ do { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " move $1, %0 \n" \ - " # mthi $1, $ac3 \n" \ - " .word 0x00201811 \n" \ + " .hword 0x0001 \n" \ + " .hword %x1 \n" \ " .set pop \n" \ : \ - : "r" (x)); \ + : "r" (val), "i" (ins)); \ } while (0) -#define mtlo0(x) \ -do { \ +#define _umips_dsp_mflo(reg) _umips_dsp_mfxxx((reg << 14) | 0x107c) +#define _umips_dsp_mfhi(reg) _umips_dsp_mfxxx((reg << 14) | 0x007c) + +#define _umips_dsp_mtlo(val, reg) _umips_dsp_mtxxx(val, ((reg << 14) | 0x307c)) +#define _umips_dsp_mthi(val, reg) _umips_dsp_mtxxx(val, ((reg << 14) | 0x207c)) + +#define mflo0() _umips_dsp_mflo(0) +#define mflo1() _umips_dsp_mflo(1) +#define mflo2() _umips_dsp_mflo(2) +#define mflo3() _umips_dsp_mflo(3) + +#define mfhi0() _umips_dsp_mfhi(0) +#define mfhi1() _umips_dsp_mfhi(1) +#define mfhi2() _umips_dsp_mfhi(2) +#define mfhi3() _umips_dsp_mfhi(3) + +#define mtlo0(x) _umips_dsp_mtlo(x, 0) +#define mtlo1(x) _umips_dsp_mtlo(x, 1) +#define mtlo2(x) _umips_dsp_mtlo(x, 2) +#define mtlo3(x) _umips_dsp_mtlo(x, 3) + +#define mthi0(x) _umips_dsp_mthi(x, 0) +#define mthi1(x) _umips_dsp_mthi(x, 1) +#define mthi2(x) _umips_dsp_mthi(x, 2) +#define mthi3(x) _umips_dsp_mthi(x, 3) + +#else /* !CONFIG_CPU_MICROMIPS */ +#define rddsp(mask) \ +({ \ + unsigned int __res; \ + \ __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mtlo $1, $ac0 \n" \ - " .word 0x00200013 \n" \ - " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) + " .set push \n" \ + " .set noat \n" \ + " # rddsp $1, %x1 \n" \ + " .word 0x7c000cb8 | (%x1 << 16) \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res) \ + : "i" (mask)); \ + __res; \ +}) -#define mtlo1(x) \ +#define wrdsp(val, mask) \ do { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " move $1, %0 \n" \ - " # mtlo $1, $ac1 \n" \ - " .word 0x00200813 \n" \ + " # wrdsp $1, %x1 \n" \ + " .word 0x7c2004f8 | (%x1 << 11) \n" \ " .set pop \n" \ - : \ - : "r" (x)); \ + : \ + : "r" (val), "i" (mask)); \ } while (0) -#define mtlo2(x) \ -do { \ +#define _dsp_mfxxx(ins) \ +({ \ + unsigned long __treg; \ + \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ - " move $1, %0 \n" \ - " # mtlo $1, $ac2 \n" \ - " .word 0x00201013 \n" \ + " .word (0x00000810 | %1) \n" \ + " move %0, $1 \n" \ " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) + : "=r" (__treg) \ + : "i" (ins)); \ + __treg; \ +}) -#define mtlo3(x) \ +#define _dsp_mtxxx(val, ins) \ do { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " move $1, %0 \n" \ - " # mtlo $1, $ac3 \n" \ - " .word 0x00201813 \n" \ + " .word (0x00200011 | %1) \n" \ " .set pop \n" \ : \ - : "r" (x)); \ + : "r" (val), "i" (ins)); \ } while (0) +#define _dsp_mflo(reg) _dsp_mfxxx((reg << 21) | 0x0002) +#define _dsp_mfhi(reg) _dsp_mfxxx((reg << 21) | 0x0000) + +#define _dsp_mtlo(val, reg) _dsp_mtxxx(val, ((reg << 11) | 0x0002)) +#define _dsp_mthi(val, reg) _dsp_mtxxx(val, ((reg << 11) | 0x0000)) + +#define mflo0() _dsp_mflo(0) +#define mflo1() _dsp_mflo(1) +#define mflo2() _dsp_mflo(2) +#define mflo3() _dsp_mflo(3) + +#define mfhi0() _dsp_mfhi(0) +#define mfhi1() _dsp_mfhi(1) +#define mfhi2() _dsp_mfhi(2) +#define mfhi3() _dsp_mfhi(3) + +#define mtlo0(x) _dsp_mtlo(x, 0) +#define mtlo1(x) _dsp_mtlo(x, 1) +#define mtlo2(x) _dsp_mtlo(x, 2) +#define mtlo3(x) _dsp_mtlo(x, 3) + +#define mthi0(x) _dsp_mthi(x, 0) +#define mthi1(x) _dsp_mthi(x, 1) +#define mthi2(x) _dsp_mthi(x, 2) +#define mthi3(x) _dsp_mthi(x, 3) + +#endif /* CONFIG_CPU_MICROMIPS */ #endif /* diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 45cfa1a..e81d719 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -77,7 +77,7 @@ extern unsigned long pgd_current[]; #define ASID_INC 0x1 extern unsigned long smtc_asid_mask; #define ASID_MASK (smtc_asid_mask) -#define HW_ASID_MASK 0xff +#define HW_ASID_MASK 0xff /* End SMTC/34K debug hack */ #else /* FIXME: not correct for R6000 */ @@ -140,7 +140,7 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) } static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) + struct task_struct *tsk) { unsigned int cpu = smp_processor_id(); unsigned long flags; @@ -238,7 +238,7 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next) } /* See comments for similar code above */ write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | - cpu_asid(cpu, next)); + cpu_asid(cpu, next)); ehb(); /* Make sure it propagates to TCStatus */ evpe(mtflags); #else diff --git a/arch/mips/include/asm/msc01_ic.h b/arch/mips/include/asm/msc01_ic.h index d92406a..ff7f074 100644 --- a/arch/mips/include/asm/msc01_ic.h +++ b/arch/mips/include/asm/msc01_ic.h @@ -15,45 +15,45 @@ * Register offset addresses *****************************************************************************/ -#define MSC01_IC_RST_OFS 0x00008 /* Software reset */ -#define MSC01_IC_ENAL_OFS 0x00100 /* Int_in enable mask 31:0 */ -#define MSC01_IC_ENAH_OFS 0x00108 /* Int_in enable mask 63:32 */ -#define MSC01_IC_DISL_OFS 0x00120 /* Int_in disable mask 31:0 */ -#define MSC01_IC_DISH_OFS 0x00128 /* Int_in disable mask 63:32 */ -#define MSC01_IC_ISBL_OFS 0x00140 /* Raw int_in 31:0 */ -#define MSC01_IC_ISBH_OFS 0x00148 /* Raw int_in 63:32 */ -#define MSC01_IC_ISAL_OFS 0x00160 /* Masked int_in 31:0 */ -#define MSC01_IC_ISAH_OFS 0x00168 /* Masked int_in 63:32 */ -#define MSC01_IC_LVL_OFS 0x00180 /* Disable priority int_out */ -#define MSC01_IC_RAMW_OFS 0x00180 /* Shadow set RAM (EI) */ -#define MSC01_IC_OSB_OFS 0x00188 /* Raw int_out */ -#define MSC01_IC_OSA_OFS 0x00190 /* Masked int_out */ -#define MSC01_IC_GENA_OFS 0x00198 /* Global HW int enable */ -#define MSC01_IC_BASE_OFS 0x001a0 /* Base address of IC_VEC */ -#define MSC01_IC_VEC_OFS 0x001b0 /* Active int's vector address */ -#define MSC01_IC_EOI_OFS 0x001c0 /* Enable lower level ints */ -#define MSC01_IC_CFG_OFS 0x001c8 /* Configuration register */ -#define MSC01_IC_TRLD_OFS 0x001d0 /* Interval timer reload val */ -#define MSC01_IC_TVAL_OFS 0x001e0 /* Interval timer current val */ -#define MSC01_IC_TCFG_OFS 0x001f0 /* Interval timer config */ -#define MSC01_IC_SUP_OFS 0x00200 /* Set up int_in line 0 */ -#define MSC01_IC_ENA_OFS 0x00800 /* Int_in enable mask 63:0 */ -#define MSC01_IC_DIS_OFS 0x00820 /* Int_in disable mask 63:0 */ -#define MSC01_IC_ISB_OFS 0x00840 /* Raw int_in 63:0 */ -#define MSC01_IC_ISA_OFS 0x00860 /* Masked int_in 63:0 */ +#define MSC01_IC_RST_OFS 0x00008 /* Software reset */ +#define MSC01_IC_ENAL_OFS 0x00100 /* Int_in enable mask 31:0 */ +#define MSC01_IC_ENAH_OFS 0x00108 /* Int_in enable mask 63:32 */ +#define MSC01_IC_DISL_OFS 0x00120 /* Int_in disable mask 31:0 */ +#define MSC01_IC_DISH_OFS 0x00128 /* Int_in disable mask 63:32 */ +#define MSC01_IC_ISBL_OFS 0x00140 /* Raw int_in 31:0 */ +#define MSC01_IC_ISBH_OFS 0x00148 /* Raw int_in 63:32 */ +#define MSC01_IC_ISAL_OFS 0x00160 /* Masked int_in 31:0 */ +#define MSC01_IC_ISAH_OFS 0x00168 /* Masked int_in 63:32 */ +#define MSC01_IC_LVL_OFS 0x00180 /* Disable priority int_out */ +#define MSC01_IC_RAMW_OFS 0x00180 /* Shadow set RAM (EI) */ +#define MSC01_IC_OSB_OFS 0x00188 /* Raw int_out */ +#define MSC01_IC_OSA_OFS 0x00190 /* Masked int_out */ +#define MSC01_IC_GENA_OFS 0x00198 /* Global HW int enable */ +#define MSC01_IC_BASE_OFS 0x001a0 /* Base address of IC_VEC */ +#define MSC01_IC_VEC_OFS 0x001b0 /* Active int's vector address */ +#define MSC01_IC_EOI_OFS 0x001c0 /* Enable lower level ints */ +#define MSC01_IC_CFG_OFS 0x001c8 /* Configuration register */ +#define MSC01_IC_TRLD_OFS 0x001d0 /* Interval timer reload val */ +#define MSC01_IC_TVAL_OFS 0x001e0 /* Interval timer current val */ +#define MSC01_IC_TCFG_OFS 0x001f0 /* Interval timer config */ +#define MSC01_IC_SUP_OFS 0x00200 /* Set up int_in line 0 */ +#define MSC01_IC_ENA_OFS 0x00800 /* Int_in enable mask 63:0 */ +#define MSC01_IC_DIS_OFS 0x00820 /* Int_in disable mask 63:0 */ +#define MSC01_IC_ISB_OFS 0x00840 /* Raw int_in 63:0 */ +#define MSC01_IC_ISA_OFS 0x00860 /* Masked int_in 63:0 */ /***************************************************************************** * Register field encodings *****************************************************************************/ -#define MSC01_IC_RST_RST_SHF 0 -#define MSC01_IC_RST_RST_MSK 0x00000001 -#define MSC01_IC_RST_RST_BIT MSC01_IC_RST_RST_MSK -#define MSC01_IC_LVL_LVL_SHF 0 -#define MSC01_IC_LVL_LVL_MSK 0x000000ff -#define MSC01_IC_LVL_SPUR_SHF 16 -#define MSC01_IC_LVL_SPUR_MSK 0x00010000 -#define MSC01_IC_LVL_SPUR_BIT MSC01_IC_LVL_SPUR_MSK +#define MSC01_IC_RST_RST_SHF 0 +#define MSC01_IC_RST_RST_MSK 0x00000001 +#define MSC01_IC_RST_RST_BIT MSC01_IC_RST_RST_MSK +#define MSC01_IC_LVL_LVL_SHF 0 +#define MSC01_IC_LVL_LVL_MSK 0x000000ff +#define MSC01_IC_LVL_SPUR_SHF 16 +#define MSC01_IC_LVL_SPUR_MSK 0x00010000 +#define MSC01_IC_LVL_SPUR_BIT MSC01_IC_LVL_SPUR_MSK #define MSC01_IC_RAMW_RIPL_SHF 0 #define MSC01_IC_RAMW_RIPL_MSK 0x0000003f #define MSC01_IC_RAMW_DATA_SHF 6 @@ -63,33 +63,33 @@ #define MSC01_IC_RAMW_READ_SHF 31 #define MSC01_IC_RAMW_READ_MSK 0x80000000 #define MSC01_IC_RAMW_READ_BIT MSC01_IC_RAMW_READ_MSK -#define MSC01_IC_OSB_OSB_SHF 0 -#define MSC01_IC_OSB_OSB_MSK 0x000000ff -#define MSC01_IC_OSA_OSA_SHF 0 -#define MSC01_IC_OSA_OSA_MSK 0x000000ff -#define MSC01_IC_GENA_GENA_SHF 0 -#define MSC01_IC_GENA_GENA_MSK 0x00000001 -#define MSC01_IC_GENA_GENA_BIT MSC01_IC_GENA_GENA_MSK -#define MSC01_IC_CFG_DIS_SHF 0 -#define MSC01_IC_CFG_DIS_MSK 0x00000001 -#define MSC01_IC_CFG_DIS_BIT MSC01_IC_CFG_DIS_MSK -#define MSC01_IC_CFG_SHFT_SHF 8 -#define MSC01_IC_CFG_SHFT_MSK 0x00000f00 -#define MSC01_IC_TCFG_ENA_SHF 0 -#define MSC01_IC_TCFG_ENA_MSK 0x00000001 -#define MSC01_IC_TCFG_ENA_BIT MSC01_IC_TCFG_ENA_MSK -#define MSC01_IC_TCFG_INT_SHF 8 -#define MSC01_IC_TCFG_INT_MSK 0x00000100 -#define MSC01_IC_TCFG_INT_BIT MSC01_IC_TCFG_INT_MSK -#define MSC01_IC_TCFG_EDGE_SHF 16 -#define MSC01_IC_TCFG_EDGE_MSK 0x00010000 -#define MSC01_IC_TCFG_EDGE_BIT MSC01_IC_TCFG_EDGE_MSK -#define MSC01_IC_SUP_PRI_SHF 0 -#define MSC01_IC_SUP_PRI_MSK 0x00000007 -#define MSC01_IC_SUP_EDGE_SHF 8 -#define MSC01_IC_SUP_EDGE_MSK 0x00000100 -#define MSC01_IC_SUP_EDGE_BIT MSC01_IC_SUP_EDGE_MSK -#define MSC01_IC_SUP_STEP 8 +#define MSC01_IC_OSB_OSB_SHF 0 +#define MSC01_IC_OSB_OSB_MSK 0x000000ff +#define MSC01_IC_OSA_OSA_SHF 0 +#define MSC01_IC_OSA_OSA_MSK 0x000000ff +#define MSC01_IC_GENA_GENA_SHF 0 +#define MSC01_IC_GENA_GENA_MSK 0x00000001 +#define MSC01_IC_GENA_GENA_BIT MSC01_IC_GENA_GENA_MSK +#define MSC01_IC_CFG_DIS_SHF 0 +#define MSC01_IC_CFG_DIS_MSK 0x00000001 +#define MSC01_IC_CFG_DIS_BIT MSC01_IC_CFG_DIS_MSK +#define MSC01_IC_CFG_SHFT_SHF 8 +#define MSC01_IC_CFG_SHFT_MSK 0x00000f00 +#define MSC01_IC_TCFG_ENA_SHF 0 +#define MSC01_IC_TCFG_ENA_MSK 0x00000001 +#define MSC01_IC_TCFG_ENA_BIT MSC01_IC_TCFG_ENA_MSK +#define MSC01_IC_TCFG_INT_SHF 8 +#define MSC01_IC_TCFG_INT_MSK 0x00000100 +#define MSC01_IC_TCFG_INT_BIT MSC01_IC_TCFG_INT_MSK +#define MSC01_IC_TCFG_EDGE_SHF 16 +#define MSC01_IC_TCFG_EDGE_MSK 0x00010000 +#define MSC01_IC_TCFG_EDGE_BIT MSC01_IC_TCFG_EDGE_MSK +#define MSC01_IC_SUP_PRI_SHF 0 +#define MSC01_IC_SUP_PRI_MSK 0x00000007 +#define MSC01_IC_SUP_EDGE_SHF 8 +#define MSC01_IC_SUP_EDGE_MSK 0x00000100 +#define MSC01_IC_SUP_EDGE_BIT MSC01_IC_SUP_EDGE_MSK +#define MSC01_IC_SUP_STEP 8 /* * MIPS System controller interrupt register base. @@ -100,32 +100,32 @@ * Absolute register addresses *****************************************************************************/ -#define MSC01_IC_RST (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS) -#define MSC01_IC_ENAL (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS) -#define MSC01_IC_ENAH (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS) -#define MSC01_IC_DISL (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS) -#define MSC01_IC_DISH (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS) -#define MSC01_IC_ISBL (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS) -#define MSC01_IC_ISBH (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS) -#define MSC01_IC_ISAL (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS) -#define MSC01_IC_ISAH (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS) -#define MSC01_IC_LVL (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS) -#define MSC01_IC_RAMW (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS) -#define MSC01_IC_OSB (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS) -#define MSC01_IC_OSA (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS) -#define MSC01_IC_GENA (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS) -#define MSC01_IC_BASE (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS) -#define MSC01_IC_VEC (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS) -#define MSC01_IC_EOI (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS) -#define MSC01_IC_CFG (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS) -#define MSC01_IC_TRLD (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS) -#define MSC01_IC_TVAL (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS) -#define MSC01_IC_TCFG (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS) -#define MSC01_IC_SUP (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS) -#define MSC01_IC_ENA (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS) -#define MSC01_IC_DIS (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS) -#define MSC01_IC_ISB (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS) -#define MSC01_IC_ISA (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS) +#define MSC01_IC_RST (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS) +#define MSC01_IC_ENAL (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS) +#define MSC01_IC_ENAH (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS) +#define MSC01_IC_DISL (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS) +#define MSC01_IC_DISH (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS) +#define MSC01_IC_ISBL (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS) +#define MSC01_IC_ISBH (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS) +#define MSC01_IC_ISAL (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS) +#define MSC01_IC_ISAH (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS) +#define MSC01_IC_LVL (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS) +#define MSC01_IC_RAMW (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS) +#define MSC01_IC_OSB (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS) +#define MSC01_IC_OSA (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS) +#define MSC01_IC_GENA (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS) +#define MSC01_IC_BASE (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS) +#define MSC01_IC_VEC (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS) +#define MSC01_IC_EOI (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS) +#define MSC01_IC_CFG (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS) +#define MSC01_IC_TRLD (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS) +#define MSC01_IC_TVAL (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS) +#define MSC01_IC_TCFG (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS) +#define MSC01_IC_SUP (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS) +#define MSC01_IC_ENA (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS) +#define MSC01_IC_DIS (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS) +#define MSC01_IC_ISB (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS) +#define MSC01_IC_ISA (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS) /* * Soc-it interrupts are configurable. diff --git a/arch/mips/include/asm/netlogic/common.h b/arch/mips/include/asm/netlogic/common.h index 42bfd5f..aef560a 100644 --- a/arch/mips/include/asm/netlogic/common.h +++ b/arch/mips/include/asm/netlogic/common.h @@ -38,11 +38,11 @@ /* * Common SMP definitions */ -#define RESET_VEC_PHYS 0x1fc00000 -#define RESET_DATA_PHYS (RESET_VEC_PHYS + (1<<10)) -#define BOOT_THREAD_MODE 0 -#define BOOT_NMI_LOCK 4 -#define BOOT_NMI_HANDLER 8 +#define RESET_VEC_PHYS 0x1fc00000 +#define RESET_DATA_PHYS (RESET_VEC_PHYS + (1<<10)) +#define BOOT_THREAD_MODE 0 +#define BOOT_NMI_LOCK 4 +#define BOOT_NMI_HANDLER 8 #ifndef __ASSEMBLY__ #include <linux/cpumask.h> @@ -80,7 +80,7 @@ extern unsigned int nlm_threads_per_core; extern cpumask_t nlm_cpumask; struct nlm_soc_info { - unsigned long coremask; /* cores enabled on the soc */ + unsigned long coremask; /* cores enabled on the soc */ unsigned long ebase; uint64_t irqmask; uint64_t sysbase; /* only for XLP */ @@ -88,9 +88,9 @@ struct nlm_soc_info { spinlock_t piclock; }; -#define nlm_get_node(i) (&nlm_nodes[i]) +#define nlm_get_node(i) (&nlm_nodes[i]) #ifdef CONFIG_CPU_XLR -#define nlm_current_node() (&nlm_nodes[0]) +#define nlm_current_node() (&nlm_nodes[0]) #else #define nlm_current_node() (&nlm_nodes[nlm_nodeid()]) #endif diff --git a/arch/mips/include/asm/netlogic/haldefs.h b/arch/mips/include/asm/netlogic/haldefs.h index 72a0c78..419d8ae 100644 --- a/arch/mips/include/asm/netlogic/haldefs.h +++ b/arch/mips/include/asm/netlogic/haldefs.h @@ -48,7 +48,7 @@ * access 64 bit addresses or data. * * We need to disable interrupts because we save just the lower 32 bits of - * registers in interrupt handling. So if we get hit by an interrupt while + * registers in interrupt handling. So if we get hit by an interrupt while * using the upper 32 bits of a register, we lose. */ static inline uint32_t nlm_save_flags_kx(void) diff --git a/arch/mips/include/asm/netlogic/mips-extns.h b/arch/mips/include/asm/netlogic/mips-extns.h index 32ba6d9..8ad2e0f 100644 --- a/arch/mips/include/asm/netlogic/mips-extns.h +++ b/arch/mips/include/asm/netlogic/mips-extns.h @@ -49,7 +49,7 @@ */ #define write_c0_eimr(val) \ do { \ - if (sizeof(unsigned long) == 4) { \ + if (sizeof(unsigned long) == 4) { \ unsigned long __flags; \ \ local_irq_save(__flags); \ @@ -68,6 +68,85 @@ do { \ __write_64bit_c0_register($9, 7, (val)); \ } while (0) +/* + * Handling the 64 bit EIMR and EIRR registers in 32-bit mode with + * standard functions will be very inefficient. This provides + * optimized functions for the normal operations on the registers. + * + * Call with interrupts disabled. + */ +static inline void ack_c0_eirr(int irq) +{ + __asm__ __volatile__( + ".set push\n\t" + ".set mips64\n\t" + ".set noat\n\t" + "li $1, 1\n\t" + "dsllv $1, $1, %0\n\t" + "dmtc0 $1, $9, 6\n\t" + ".set pop" + : : "r" (irq)); +} + +static inline void set_c0_eimr(int irq) +{ + __asm__ __volatile__( + ".set push\n\t" + ".set mips64\n\t" + ".set noat\n\t" + "li $1, 1\n\t" + "dsllv %0, $1, %0\n\t" + "dmfc0 $1, $9, 7\n\t" + "or $1, %0\n\t" + "dmtc0 $1, $9, 7\n\t" + ".set pop" + : "+r" (irq)); +} + +static inline void clear_c0_eimr(int irq) +{ + __asm__ __volatile__( + ".set push\n\t" + ".set mips64\n\t" + ".set noat\n\t" + "li $1, 1\n\t" + "dsllv %0, $1, %0\n\t" + "dmfc0 $1, $9, 7\n\t" + "or $1, %0\n\t" + "xor $1, %0\n\t" + "dmtc0 $1, $9, 7\n\t" + ".set pop" + : "+r" (irq)); +} + +/* + * Read c0 eimr and c0 eirr, do AND of the two values, the result is + * the interrupts which are raised and are not masked. + */ +static inline uint64_t read_c0_eirr_and_eimr(void) +{ + uint64_t val; + +#ifdef CONFIG_64BIT + val = read_c0_eimr() & read_c0_eirr(); +#else + __asm__ __volatile__( + ".set push\n\t" + ".set mips64\n\t" + ".set noat\n\t" + "dmfc0 %M0, $9, 6\n\t" + "dmfc0 %L0, $9, 7\n\t" + "and %M0, %L0\n\t" + "dsll %L0, %M0, 32\n\t" + "dsra %M0, %M0, 32\n\t" + "dsra %L0, %L0, 32\n\t" + ".set pop" + : "=r" (val)); +#endif + + return val; +} + static inline int hard_smp_processor_id(void) { return __read_32bit_c0_register($15, 1) & 0x3ff; @@ -208,7 +287,7 @@ do { \ ".set\tmips0\n\t" \ : : "Jr" (value)); \ else \ - __asm__ __volatile__( \ + __asm__ __volatile__( \ ".set\tmips32\n\t" \ "mtc2\t%z0, " #reg ", " #sel "\n\t" \ ".set\tmips0\n\t" \ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h index ca95133..790f0f1 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h @@ -178,9 +178,9 @@ #define nlm_read_bridge_reg(b, r) nlm_read_reg(b, r) #define nlm_write_bridge_reg(b, r, v) nlm_write_reg(b, r, v) -#define nlm_get_bridge_pcibase(node) \ +#define nlm_get_bridge_pcibase(node) \ nlm_pcicfg_base(XLP_IO_BRIDGE_OFFSET(node)) -#define nlm_get_bridge_regbase(node) \ +#define nlm_get_bridge_regbase(node) \ (nlm_get_bridge_pcibase(node) + XLP_IO_PCI_HDRSZ) #endif /* __ASSEMBLY__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h index 7b63a6b..6d2e58a 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h @@ -46,6 +46,8 @@ #define CPU_BLOCKID_FPU 9 #define CPU_BLOCKID_MAP 10 +#define ICU_DEFEATURE 0x100 + #define LSU_DEFEATURE 0x304 #define LSU_DEBUG_ADDR 0x305 #define LSU_DEBUG_DATA0 0x306 diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h index 2c63f97..9fac46f 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h @@ -35,12 +35,12 @@ #ifndef __NLM_HAL_IOMAP_H__ #define __NLM_HAL_IOMAP_H__ -#define XLP_DEFAULT_IO_BASE 0x18000000 +#define XLP_DEFAULT_IO_BASE 0x18000000 #define XLP_DEFAULT_PCI_ECFG_BASE XLP_DEFAULT_IO_BASE #define XLP_DEFAULT_PCI_CFG_BASE 0x1c000000 #define NMI_BASE 0xbfc00000 -#define XLP_IO_CLK 133333333 +#define XLP_IO_CLK 133333333 #define XLP_PCIE_CFG_SIZE 0x1000 /* 4K */ #define XLP_PCIE_DEV_BLK_SIZE (8 * XLP_PCIE_CFG_SIZE) @@ -96,8 +96,8 @@ #define XLP_IO_NAND_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 1) #define XLP_IO_SPI_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 2) /* SD flash */ -#define XLP_IO_SD_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 3) -#define XLP_IO_MMC_OFFSET(node, slot) \ +#define XLP_IO_SD_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 3) +#define XLP_IO_MMC_OFFSET(node, slot) \ ((XLP_IO_SD_OFFSET(node))+(slot*0x100)+XLP_IO_PCI_HDRSZ) /* PCI config header register id's */ @@ -125,26 +125,26 @@ #define XLP_PCI_SBB_WT_REG 0x3f /* PCI IDs for SoC device */ -#define PCI_VENDOR_NETLOGIC 0x184e - -#define PCI_DEVICE_ID_NLM_ROOT 0x1001 -#define PCI_DEVICE_ID_NLM_ICI 0x1002 -#define PCI_DEVICE_ID_NLM_PIC 0x1003 -#define PCI_DEVICE_ID_NLM_PCIE 0x1004 -#define PCI_DEVICE_ID_NLM_EHCI 0x1007 -#define PCI_DEVICE_ID_NLM_OHCI 0x1008 -#define PCI_DEVICE_ID_NLM_NAE 0x1009 -#define PCI_DEVICE_ID_NLM_POE 0x100A -#define PCI_DEVICE_ID_NLM_FMN 0x100B -#define PCI_DEVICE_ID_NLM_RAID 0x100D -#define PCI_DEVICE_ID_NLM_SAE 0x100D -#define PCI_DEVICE_ID_NLM_RSA 0x100E -#define PCI_DEVICE_ID_NLM_CMP 0x100F -#define PCI_DEVICE_ID_NLM_UART 0x1010 -#define PCI_DEVICE_ID_NLM_I2C 0x1011 -#define PCI_DEVICE_ID_NLM_NOR 0x1015 -#define PCI_DEVICE_ID_NLM_NAND 0x1016 -#define PCI_DEVICE_ID_NLM_MMC 0x1018 +#define PCI_VENDOR_NETLOGIC 0x184e + +#define PCI_DEVICE_ID_NLM_ROOT 0x1001 +#define PCI_DEVICE_ID_NLM_ICI 0x1002 +#define PCI_DEVICE_ID_NLM_PIC 0x1003 +#define PCI_DEVICE_ID_NLM_PCIE 0x1004 +#define PCI_DEVICE_ID_NLM_EHCI 0x1007 +#define PCI_DEVICE_ID_NLM_OHCI 0x1008 +#define PCI_DEVICE_ID_NLM_NAE 0x1009 +#define PCI_DEVICE_ID_NLM_POE 0x100A +#define PCI_DEVICE_ID_NLM_FMN 0x100B +#define PCI_DEVICE_ID_NLM_RAID 0x100D +#define PCI_DEVICE_ID_NLM_SAE 0x100D +#define PCI_DEVICE_ID_NLM_RSA 0x100E +#define PCI_DEVICE_ID_NLM_CMP 0x100F +#define PCI_DEVICE_ID_NLM_UART 0x1010 +#define PCI_DEVICE_ID_NLM_I2C 0x1011 +#define PCI_DEVICE_ID_NLM_NOR 0x1015 +#define PCI_DEVICE_ID_NLM_NAND 0x1016 +#define PCI_DEVICE_ID_NLM_MMC 0x1018 #ifndef __ASSEMBLY__ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h index 66c323d..b559cb9 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h @@ -33,42 +33,42 @@ */ #ifndef __NLM_HAL_PCIBUS_H__ -#define __NLM_HAL_PCIBUS_H__ +#define __NLM_HAL_PCIBUS_H__ /* PCIE Memory and IO regions */ -#define PCIE_MEM_BASE 0xd0000000ULL -#define PCIE_MEM_LIMIT 0xdfffffffULL -#define PCIE_IO_BASE 0x14000000ULL -#define PCIE_IO_LIMIT 0x15ffffffULL +#define PCIE_MEM_BASE 0xd0000000ULL +#define PCIE_MEM_LIMIT 0xdfffffffULL +#define PCIE_IO_BASE 0x14000000ULL +#define PCIE_IO_LIMIT 0x15ffffffULL -#define PCIE_BRIDGE_CMD 0x1 -#define PCIE_BRIDGE_MSI_CAP 0x14 -#define PCIE_BRIDGE_MSI_ADDRL 0x15 -#define PCIE_BRIDGE_MSI_ADDRH 0x16 -#define PCIE_BRIDGE_MSI_DATA 0x17 +#define PCIE_BRIDGE_CMD 0x1 +#define PCIE_BRIDGE_MSI_CAP 0x14 +#define PCIE_BRIDGE_MSI_ADDRL 0x15 +#define PCIE_BRIDGE_MSI_ADDRH 0x16 +#define PCIE_BRIDGE_MSI_DATA 0x17 /* XLP Global PCIE configuration space registers */ -#define PCIE_BYTE_SWAP_MEM_BASE 0x247 -#define PCIE_BYTE_SWAP_MEM_LIM 0x248 -#define PCIE_BYTE_SWAP_IO_BASE 0x249 -#define PCIE_BYTE_SWAP_IO_LIM 0x24A -#define PCIE_MSI_STATUS 0x25A -#define PCIE_MSI_EN 0x25B -#define PCIE_INT_EN0 0x261 +#define PCIE_BYTE_SWAP_MEM_BASE 0x247 +#define PCIE_BYTE_SWAP_MEM_LIM 0x248 +#define PCIE_BYTE_SWAP_IO_BASE 0x249 +#define PCIE_BYTE_SWAP_IO_LIM 0x24A +#define PCIE_MSI_STATUS 0x25A +#define PCIE_MSI_EN 0x25B +#define PCIE_INT_EN0 0x261 /* PCIE_MSI_EN */ -#define PCIE_MSI_VECTOR_INT_EN 0xFFFFFFFF +#define PCIE_MSI_VECTOR_INT_EN 0xFFFFFFFF /* PCIE_INT_EN0 */ -#define PCIE_MSI_INT_EN (1 << 9) +#define PCIE_MSI_INT_EN (1 << 9) #ifndef __ASSEMBLY__ -#define nlm_read_pcie_reg(b, r) nlm_read_reg(b, r) -#define nlm_write_pcie_reg(b, r, v) nlm_write_reg(b, r, v) -#define nlm_get_pcie_base(node, inst) \ +#define nlm_read_pcie_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_pcie_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_pcie_base(node, inst) \ nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, inst)) -#define nlm_get_pcie_regbase(node, inst) \ +#define nlm_get_pcie_regbase(node, inst) \ (nlm_get_pcie_base(node, inst) + XLP_IO_PCI_HDRSZ) int xlp_pcie_link_irt(int link); diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h index b2e53a5..3df5301 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/pic.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h @@ -36,7 +36,7 @@ #define _NLM_HAL_PIC_H /* PIC Specific registers */ -#define PIC_CTRL 0x00 +#define PIC_CTRL 0x00 /* PIC control register defines */ #define PIC_CTRL_ITV 32 /* interrupt timeout value */ @@ -71,41 +71,41 @@ #define PIC_IRT_DB 16 /* Destination base */ #define PIC_IRT_DTE 0 /* Destination thread enables */ -#define PIC_BYTESWAP 0x02 -#define PIC_STATUS 0x04 +#define PIC_BYTESWAP 0x02 +#define PIC_STATUS 0x04 #define PIC_INTR_TIMEOUT 0x06 #define PIC_ICI0_INTR_TIMEOUT 0x08 #define PIC_ICI1_INTR_TIMEOUT 0x0a #define PIC_ICI2_INTR_TIMEOUT 0x0c #define PIC_IPI_CTL 0x0e -#define PIC_INT_ACK 0x10 -#define PIC_INT_PENDING0 0x12 -#define PIC_INT_PENDING1 0x14 -#define PIC_INT_PENDING2 0x16 - -#define PIC_WDOG0_MAXVAL 0x18 -#define PIC_WDOG0_COUNT 0x1a -#define PIC_WDOG0_ENABLE0 0x1c -#define PIC_WDOG0_ENABLE1 0x1e -#define PIC_WDOG0_BEATCMD 0x20 -#define PIC_WDOG0_BEAT0 0x22 -#define PIC_WDOG0_BEAT1 0x24 - -#define PIC_WDOG1_MAXVAL 0x26 -#define PIC_WDOG1_COUNT 0x28 -#define PIC_WDOG1_ENABLE0 0x2a -#define PIC_WDOG1_ENABLE1 0x2c -#define PIC_WDOG1_BEATCMD 0x2e -#define PIC_WDOG1_BEAT0 0x30 -#define PIC_WDOG1_BEAT1 0x32 - -#define PIC_WDOG_MAXVAL(i) (PIC_WDOG0_MAXVAL + ((i) ? 7 : 0)) -#define PIC_WDOG_COUNT(i) (PIC_WDOG0_COUNT + ((i) ? 7 : 0)) -#define PIC_WDOG_ENABLE0(i) (PIC_WDOG0_ENABLE0 + ((i) ? 7 : 0)) -#define PIC_WDOG_ENABLE1(i) (PIC_WDOG0_ENABLE1 + ((i) ? 7 : 0)) -#define PIC_WDOG_BEATCMD(i) (PIC_WDOG0_BEATCMD + ((i) ? 7 : 0)) -#define PIC_WDOG_BEAT0(i) (PIC_WDOG0_BEAT0 + ((i) ? 7 : 0)) -#define PIC_WDOG_BEAT1(i) (PIC_WDOG0_BEAT1 + ((i) ? 7 : 0)) +#define PIC_INT_ACK 0x10 +#define PIC_INT_PENDING0 0x12 +#define PIC_INT_PENDING1 0x14 +#define PIC_INT_PENDING2 0x16 + +#define PIC_WDOG0_MAXVAL 0x18 +#define PIC_WDOG0_COUNT 0x1a +#define PIC_WDOG0_ENABLE0 0x1c +#define PIC_WDOG0_ENABLE1 0x1e +#define PIC_WDOG0_BEATCMD 0x20 +#define PIC_WDOG0_BEAT0 0x22 +#define PIC_WDOG0_BEAT1 0x24 + +#define PIC_WDOG1_MAXVAL 0x26 +#define PIC_WDOG1_COUNT 0x28 +#define PIC_WDOG1_ENABLE0 0x2a +#define PIC_WDOG1_ENABLE1 0x2c +#define PIC_WDOG1_BEATCMD 0x2e +#define PIC_WDOG1_BEAT0 0x30 +#define PIC_WDOG1_BEAT1 0x32 + +#define PIC_WDOG_MAXVAL(i) (PIC_WDOG0_MAXVAL + ((i) ? 7 : 0)) +#define PIC_WDOG_COUNT(i) (PIC_WDOG0_COUNT + ((i) ? 7 : 0)) +#define PIC_WDOG_ENABLE0(i) (PIC_WDOG0_ENABLE0 + ((i) ? 7 : 0)) +#define PIC_WDOG_ENABLE1(i) (PIC_WDOG0_ENABLE1 + ((i) ? 7 : 0)) +#define PIC_WDOG_BEATCMD(i) (PIC_WDOG0_BEATCMD + ((i) ? 7 : 0)) +#define PIC_WDOG_BEAT0(i) (PIC_WDOG0_BEAT0 + ((i) ? 7 : 0)) +#define PIC_WDOG_BEAT1(i) (PIC_WDOG0_BEAT1 + ((i) ? 7 : 0)) #define PIC_TIMER0_MAXVAL 0x34 #define PIC_TIMER1_MAXVAL 0x36 @@ -127,28 +127,28 @@ #define PIC_TIMER7_COUNT 0x52 #define PIC_TIMER_COUNT(i) (PIC_TIMER0_COUNT + ((i) * 2)) -#define PIC_ITE0_N0_N1 0x54 -#define PIC_ITE1_N0_N1 0x58 -#define PIC_ITE2_N0_N1 0x5c -#define PIC_ITE3_N0_N1 0x60 -#define PIC_ITE4_N0_N1 0x64 -#define PIC_ITE5_N0_N1 0x68 -#define PIC_ITE6_N0_N1 0x6c -#define PIC_ITE7_N0_N1 0x70 -#define PIC_ITE_N0_N1(i) (PIC_ITE0_N0_N1 + ((i) * 4)) - -#define PIC_ITE0_N2_N3 0x56 -#define PIC_ITE1_N2_N3 0x5a -#define PIC_ITE2_N2_N3 0x5e -#define PIC_ITE3_N2_N3 0x62 -#define PIC_ITE4_N2_N3 0x66 -#define PIC_ITE5_N2_N3 0x6a -#define PIC_ITE6_N2_N3 0x6e -#define PIC_ITE7_N2_N3 0x72 -#define PIC_ITE_N2_N3(i) (PIC_ITE0_N2_N3 + ((i) * 4)) - -#define PIC_IRT0 0x74 -#define PIC_IRT(i) (PIC_IRT0 + ((i) * 2)) +#define PIC_ITE0_N0_N1 0x54 +#define PIC_ITE1_N0_N1 0x58 +#define PIC_ITE2_N0_N1 0x5c +#define PIC_ITE3_N0_N1 0x60 +#define PIC_ITE4_N0_N1 0x64 +#define PIC_ITE5_N0_N1 0x68 +#define PIC_ITE6_N0_N1 0x6c +#define PIC_ITE7_N0_N1 0x70 +#define PIC_ITE_N0_N1(i) (PIC_ITE0_N0_N1 + ((i) * 4)) + +#define PIC_ITE0_N2_N3 0x56 +#define PIC_ITE1_N2_N3 0x5a +#define PIC_ITE2_N2_N3 0x5e +#define PIC_ITE3_N2_N3 0x62 +#define PIC_ITE4_N2_N3 0x66 +#define PIC_ITE5_N2_N3 0x6a +#define PIC_ITE6_N2_N3 0x6e +#define PIC_ITE7_N2_N3 0x72 +#define PIC_ITE_N2_N3(i) (PIC_ITE0_N2_N3 + ((i) * 4)) + +#define PIC_IRT0 0x74 +#define PIC_IRT(i) (PIC_IRT0 + ((i) * 2)) #define TIMER_CYCLES_MAXVAL 0xffffffffffffffffULL @@ -261,6 +261,8 @@ #define PIC_LOCAL_SCHEDULING 1 #define PIC_GLOBAL_SCHEDULING 0 +#define PIC_CLK_HZ 133333333 + #define nlm_read_pic_reg(b, r) nlm_read_reg64(b, r) #define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v) #define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node)) @@ -315,6 +317,12 @@ nlm_pic_read_timer(uint64_t base, int timer) return nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer)); } +static inline uint32_t +nlm_pic_read_timer32(uint64_t base, int timer) +{ + return (uint32_t)nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer)); +} + static inline void nlm_pic_write_timer(uint64_t base, int timer, uint64_t value) { @@ -376,9 +384,9 @@ nlm_pic_ack(uint64_t base, int irt_num) } static inline void -nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt) +nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt, int en) { - nlm_pic_write_irt_direct(base, irt, 0, 0, 0, irq, hwt); + nlm_pic_write_irt_direct(base, irt, en, 0, 0, irq, hwt); } int nlm_irq_to_irt(int irq); diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h index 258e8cc..470e52b 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/sys.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/sys.h @@ -40,89 +40,89 @@ * @author Netlogic Microsystems * @brief HAL for System configuration registers */ -#define SYS_CHIP_RESET 0x00 -#define SYS_POWER_ON_RESET_CFG 0x01 -#define SYS_EFUSE_DEVICE_CFG_STATUS0 0x02 -#define SYS_EFUSE_DEVICE_CFG_STATUS1 0x03 -#define SYS_EFUSE_DEVICE_CFG_STATUS2 0x04 -#define SYS_EFUSE_DEVICE_CFG3 0x05 -#define SYS_EFUSE_DEVICE_CFG4 0x06 -#define SYS_EFUSE_DEVICE_CFG5 0x07 -#define SYS_EFUSE_DEVICE_CFG6 0x08 -#define SYS_EFUSE_DEVICE_CFG7 0x09 -#define SYS_PLL_CTRL 0x0a -#define SYS_CPU_RESET 0x0b -#define SYS_CPU_NONCOHERENT_MODE 0x0d -#define SYS_CORE_DFS_DIS_CTRL 0x0e -#define SYS_CORE_DFS_RST_CTRL 0x0f -#define SYS_CORE_DFS_BYP_CTRL 0x10 -#define SYS_CORE_DFS_PHA_CTRL 0x11 -#define SYS_CORE_DFS_DIV_INC_CTRL 0x12 -#define SYS_CORE_DFS_DIV_DEC_CTRL 0x13 -#define SYS_CORE_DFS_DIV_VALUE 0x14 -#define SYS_RESET 0x15 -#define SYS_DFS_DIS_CTRL 0x16 -#define SYS_DFS_RST_CTRL 0x17 -#define SYS_DFS_BYP_CTRL 0x18 -#define SYS_DFS_DIV_INC_CTRL 0x19 -#define SYS_DFS_DIV_DEC_CTRL 0x1a -#define SYS_DFS_DIV_VALUE0 0x1b -#define SYS_DFS_DIV_VALUE1 0x1c -#define SYS_SENSE_AMP_DLY 0x1d -#define SYS_SOC_SENSE_AMP_DLY 0x1e -#define SYS_CTRL0 0x1f -#define SYS_CTRL1 0x20 -#define SYS_TIMEOUT_BS1 0x21 -#define SYS_BYTE_SWAP 0x22 -#define SYS_VRM_VID 0x23 -#define SYS_PWR_RAM_CMD 0x24 -#define SYS_PWR_RAM_ADDR 0x25 -#define SYS_PWR_RAM_DATA0 0x26 -#define SYS_PWR_RAM_DATA1 0x27 -#define SYS_PWR_RAM_DATA2 0x28 -#define SYS_PWR_UCODE 0x29 -#define SYS_CPU0_PWR_STATUS 0x2a -#define SYS_CPU1_PWR_STATUS 0x2b -#define SYS_CPU2_PWR_STATUS 0x2c -#define SYS_CPU3_PWR_STATUS 0x2d -#define SYS_CPU4_PWR_STATUS 0x2e -#define SYS_CPU5_PWR_STATUS 0x2f -#define SYS_CPU6_PWR_STATUS 0x30 -#define SYS_CPU7_PWR_STATUS 0x31 -#define SYS_STATUS 0x32 -#define SYS_INT_POL 0x33 -#define SYS_INT_TYPE 0x34 -#define SYS_INT_STATUS 0x35 -#define SYS_INT_MASK0 0x36 -#define SYS_INT_MASK1 0x37 -#define SYS_UCO_S_ECC 0x38 -#define SYS_UCO_M_ECC 0x39 -#define SYS_UCO_ADDR 0x3a -#define SYS_UCO_INSTR 0x3b -#define SYS_MEM_BIST0 0x3c -#define SYS_MEM_BIST1 0x3d -#define SYS_MEM_BIST2 0x3e -#define SYS_MEM_BIST3 0x3f -#define SYS_MEM_BIST4 0x40 -#define SYS_MEM_BIST5 0x41 -#define SYS_MEM_BIST6 0x42 -#define SYS_MEM_BIST7 0x43 -#define SYS_MEM_BIST8 0x44 -#define SYS_MEM_BIST9 0x45 -#define SYS_MEM_BIST10 0x46 -#define SYS_MEM_BIST11 0x47 -#define SYS_MEM_BIST12 0x48 -#define SYS_SCRTCH0 0x49 -#define SYS_SCRTCH1 0x4a -#define SYS_SCRTCH2 0x4b -#define SYS_SCRTCH3 0x4c +#define SYS_CHIP_RESET 0x00 +#define SYS_POWER_ON_RESET_CFG 0x01 +#define SYS_EFUSE_DEVICE_CFG_STATUS0 0x02 +#define SYS_EFUSE_DEVICE_CFG_STATUS1 0x03 +#define SYS_EFUSE_DEVICE_CFG_STATUS2 0x04 +#define SYS_EFUSE_DEVICE_CFG3 0x05 +#define SYS_EFUSE_DEVICE_CFG4 0x06 +#define SYS_EFUSE_DEVICE_CFG5 0x07 +#define SYS_EFUSE_DEVICE_CFG6 0x08 +#define SYS_EFUSE_DEVICE_CFG7 0x09 +#define SYS_PLL_CTRL 0x0a +#define SYS_CPU_RESET 0x0b +#define SYS_CPU_NONCOHERENT_MODE 0x0d +#define SYS_CORE_DFS_DIS_CTRL 0x0e +#define SYS_CORE_DFS_RST_CTRL 0x0f +#define SYS_CORE_DFS_BYP_CTRL 0x10 +#define SYS_CORE_DFS_PHA_CTRL 0x11 +#define SYS_CORE_DFS_DIV_INC_CTRL 0x12 +#define SYS_CORE_DFS_DIV_DEC_CTRL 0x13 +#define SYS_CORE_DFS_DIV_VALUE 0x14 +#define SYS_RESET 0x15 +#define SYS_DFS_DIS_CTRL 0x16 +#define SYS_DFS_RST_CTRL 0x17 +#define SYS_DFS_BYP_CTRL 0x18 +#define SYS_DFS_DIV_INC_CTRL 0x19 +#define SYS_DFS_DIV_DEC_CTRL 0x1a +#define SYS_DFS_DIV_VALUE0 0x1b +#define SYS_DFS_DIV_VALUE1 0x1c +#define SYS_SENSE_AMP_DLY 0x1d +#define SYS_SOC_SENSE_AMP_DLY 0x1e +#define SYS_CTRL0 0x1f +#define SYS_CTRL1 0x20 +#define SYS_TIMEOUT_BS1 0x21 +#define SYS_BYTE_SWAP 0x22 +#define SYS_VRM_VID 0x23 +#define SYS_PWR_RAM_CMD 0x24 +#define SYS_PWR_RAM_ADDR 0x25 +#define SYS_PWR_RAM_DATA0 0x26 +#define SYS_PWR_RAM_DATA1 0x27 +#define SYS_PWR_RAM_DATA2 0x28 +#define SYS_PWR_UCODE 0x29 +#define SYS_CPU0_PWR_STATUS 0x2a +#define SYS_CPU1_PWR_STATUS 0x2b +#define SYS_CPU2_PWR_STATUS 0x2c +#define SYS_CPU3_PWR_STATUS 0x2d +#define SYS_CPU4_PWR_STATUS 0x2e +#define SYS_CPU5_PWR_STATUS 0x2f +#define SYS_CPU6_PWR_STATUS 0x30 +#define SYS_CPU7_PWR_STATUS 0x31 +#define SYS_STATUS 0x32 +#define SYS_INT_POL 0x33 +#define SYS_INT_TYPE 0x34 +#define SYS_INT_STATUS 0x35 +#define SYS_INT_MASK0 0x36 +#define SYS_INT_MASK1 0x37 +#define SYS_UCO_S_ECC 0x38 +#define SYS_UCO_M_ECC 0x39 +#define SYS_UCO_ADDR 0x3a +#define SYS_UCO_INSTR 0x3b +#define SYS_MEM_BIST0 0x3c +#define SYS_MEM_BIST1 0x3d +#define SYS_MEM_BIST2 0x3e +#define SYS_MEM_BIST3 0x3f +#define SYS_MEM_BIST4 0x40 +#define SYS_MEM_BIST5 0x41 +#define SYS_MEM_BIST6 0x42 +#define SYS_MEM_BIST7 0x43 +#define SYS_MEM_BIST8 0x44 +#define SYS_MEM_BIST9 0x45 +#define SYS_MEM_BIST10 0x46 +#define SYS_MEM_BIST11 0x47 +#define SYS_MEM_BIST12 0x48 +#define SYS_SCRTCH0 0x49 +#define SYS_SCRTCH1 0x4a +#define SYS_SCRTCH2 0x4b +#define SYS_SCRTCH3 0x4c #ifndef __ASSEMBLY__ -#define nlm_read_sys_reg(b, r) nlm_read_reg(b, r) -#define nlm_write_sys_reg(b, r, v) nlm_write_reg(b, r, v) -#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node)) -#define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ) +#define nlm_read_sys_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_sys_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node)) +#define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ) #endif #endif diff --git a/arch/mips/include/asm/netlogic/xlp-hal/uart.h b/arch/mips/include/asm/netlogic/xlp-hal/uart.h index 6a7046c..86d16e1 100644 --- a/arch/mips/include/asm/netlogic/xlp-hal/uart.h +++ b/arch/mips/include/asm/netlogic/xlp-hal/uart.h @@ -91,8 +91,8 @@ #if !defined(LOCORE) && !defined(__ASSEMBLY__) -#define nlm_read_uart_reg(b, r) nlm_read_reg(b, r) -#define nlm_write_uart_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_read_uart_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_uart_reg(b, r, v) nlm_write_reg(b, r, v) #define nlm_get_uart_pcibase(node, inst) \ nlm_pcicfg_base(XLP_IO_UART_OFFSET(node, inst)) #define nlm_get_uart_regbase(node, inst) \ diff --git a/arch/mips/include/asm/netlogic/xlr/fmn.h b/arch/mips/include/asm/netlogic/xlr/fmn.h index 68d5167..2a78929 100644 --- a/arch/mips/include/asm/netlogic/xlr/fmn.h +++ b/arch/mips/include/asm/netlogic/xlr/fmn.h @@ -38,108 +38,108 @@ #include <asm/netlogic/mips-extns.h> /* for COP2 access */ /* Station IDs */ -#define FMN_STNID_CPU0 0x00 -#define FMN_STNID_CPU1 0x08 -#define FMN_STNID_CPU2 0x10 -#define FMN_STNID_CPU3 0x18 -#define FMN_STNID_CPU4 0x20 -#define FMN_STNID_CPU5 0x28 -#define FMN_STNID_CPU6 0x30 -#define FMN_STNID_CPU7 0x38 - -#define FMN_STNID_XGS0_TX 64 -#define FMN_STNID_XMAC0_00_TX 64 -#define FMN_STNID_XMAC0_01_TX 65 -#define FMN_STNID_XMAC0_02_TX 66 -#define FMN_STNID_XMAC0_03_TX 67 -#define FMN_STNID_XMAC0_04_TX 68 -#define FMN_STNID_XMAC0_05_TX 69 -#define FMN_STNID_XMAC0_06_TX 70 -#define FMN_STNID_XMAC0_07_TX 71 -#define FMN_STNID_XMAC0_08_TX 72 -#define FMN_STNID_XMAC0_09_TX 73 -#define FMN_STNID_XMAC0_10_TX 74 -#define FMN_STNID_XMAC0_11_TX 75 -#define FMN_STNID_XMAC0_12_TX 76 -#define FMN_STNID_XMAC0_13_TX 77 -#define FMN_STNID_XMAC0_14_TX 78 -#define FMN_STNID_XMAC0_15_TX 79 - -#define FMN_STNID_XGS1_TX 80 -#define FMN_STNID_XMAC1_00_TX 80 -#define FMN_STNID_XMAC1_01_TX 81 -#define FMN_STNID_XMAC1_02_TX 82 -#define FMN_STNID_XMAC1_03_TX 83 -#define FMN_STNID_XMAC1_04_TX 84 -#define FMN_STNID_XMAC1_05_TX 85 -#define FMN_STNID_XMAC1_06_TX 86 -#define FMN_STNID_XMAC1_07_TX 87 -#define FMN_STNID_XMAC1_08_TX 88 -#define FMN_STNID_XMAC1_09_TX 89 -#define FMN_STNID_XMAC1_10_TX 90 -#define FMN_STNID_XMAC1_11_TX 91 -#define FMN_STNID_XMAC1_12_TX 92 -#define FMN_STNID_XMAC1_13_TX 93 -#define FMN_STNID_XMAC1_14_TX 94 -#define FMN_STNID_XMAC1_15_TX 95 - -#define FMN_STNID_GMAC 96 -#define FMN_STNID_GMACJFR_0 96 -#define FMN_STNID_GMACRFR_0 97 -#define FMN_STNID_GMACTX0 98 -#define FMN_STNID_GMACTX1 99 -#define FMN_STNID_GMACTX2 100 -#define FMN_STNID_GMACTX3 101 -#define FMN_STNID_GMACJFR_1 102 -#define FMN_STNID_GMACRFR_1 103 - -#define FMN_STNID_DMA 104 -#define FMN_STNID_DMA_0 104 -#define FMN_STNID_DMA_1 105 -#define FMN_STNID_DMA_2 106 -#define FMN_STNID_DMA_3 107 - -#define FMN_STNID_XGS0FR 112 -#define FMN_STNID_XMAC0JFR 112 -#define FMN_STNID_XMAC0RFR 113 - -#define FMN_STNID_XGS1FR 114 -#define FMN_STNID_XMAC1JFR 114 -#define FMN_STNID_XMAC1RFR 115 -#define FMN_STNID_SEC 120 -#define FMN_STNID_SEC0 120 -#define FMN_STNID_SEC1 121 -#define FMN_STNID_SEC2 122 -#define FMN_STNID_SEC3 123 -#define FMN_STNID_PK0 124 -#define FMN_STNID_SEC_RSA 124 -#define FMN_STNID_SEC_RSVD0 125 -#define FMN_STNID_SEC_RSVD1 126 -#define FMN_STNID_SEC_RSVD2 127 - -#define FMN_STNID_GMAC1 80 -#define FMN_STNID_GMAC1_FR_0 81 -#define FMN_STNID_GMAC1_TX0 82 -#define FMN_STNID_GMAC1_TX1 83 -#define FMN_STNID_GMAC1_TX2 84 -#define FMN_STNID_GMAC1_TX3 85 -#define FMN_STNID_GMAC1_FR_1 87 -#define FMN_STNID_GMAC0 96 -#define FMN_STNID_GMAC0_FR_0 97 -#define FMN_STNID_GMAC0_TX0 98 -#define FMN_STNID_GMAC0_TX1 99 -#define FMN_STNID_GMAC0_TX2 100 -#define FMN_STNID_GMAC0_TX3 101 -#define FMN_STNID_GMAC0_FR_1 103 -#define FMN_STNID_CMP_0 108 -#define FMN_STNID_CMP_1 109 -#define FMN_STNID_CMP_2 110 -#define FMN_STNID_CMP_3 111 -#define FMN_STNID_PCIE_0 116 -#define FMN_STNID_PCIE_1 117 -#define FMN_STNID_PCIE_2 118 -#define FMN_STNID_PCIE_3 119 -#define FMN_STNID_XLS_PK0 121 +#define FMN_STNID_CPU0 0x00 +#define FMN_STNID_CPU1 0x08 +#define FMN_STNID_CPU2 0x10 +#define FMN_STNID_CPU3 0x18 +#define FMN_STNID_CPU4 0x20 +#define FMN_STNID_CPU5 0x28 +#define FMN_STNID_CPU6 0x30 +#define FMN_STNID_CPU7 0x38 + +#define FMN_STNID_XGS0_TX 64 +#define FMN_STNID_XMAC0_00_TX 64 +#define FMN_STNID_XMAC0_01_TX 65 +#define FMN_STNID_XMAC0_02_TX 66 +#define FMN_STNID_XMAC0_03_TX 67 +#define FMN_STNID_XMAC0_04_TX 68 +#define FMN_STNID_XMAC0_05_TX 69 +#define FMN_STNID_XMAC0_06_TX 70 +#define FMN_STNID_XMAC0_07_TX 71 +#define FMN_STNID_XMAC0_08_TX 72 +#define FMN_STNID_XMAC0_09_TX 73 +#define FMN_STNID_XMAC0_10_TX 74 +#define FMN_STNID_XMAC0_11_TX 75 +#define FMN_STNID_XMAC0_12_TX 76 +#define FMN_STNID_XMAC0_13_TX 77 +#define FMN_STNID_XMAC0_14_TX 78 +#define FMN_STNID_XMAC0_15_TX 79 + +#define FMN_STNID_XGS1_TX 80 +#define FMN_STNID_XMAC1_00_TX 80 +#define FMN_STNID_XMAC1_01_TX 81 +#define FMN_STNID_XMAC1_02_TX 82 +#define FMN_STNID_XMAC1_03_TX 83 +#define FMN_STNID_XMAC1_04_TX 84 +#define FMN_STNID_XMAC1_05_TX 85 +#define FMN_STNID_XMAC1_06_TX 86 +#define FMN_STNID_XMAC1_07_TX 87 +#define FMN_STNID_XMAC1_08_TX 88 +#define FMN_STNID_XMAC1_09_TX 89 +#define FMN_STNID_XMAC1_10_TX 90 +#define FMN_STNID_XMAC1_11_TX 91 +#define FMN_STNID_XMAC1_12_TX 92 +#define FMN_STNID_XMAC1_13_TX 93 +#define FMN_STNID_XMAC1_14_TX 94 +#define FMN_STNID_XMAC1_15_TX 95 + +#define FMN_STNID_GMAC 96 +#define FMN_STNID_GMACJFR_0 96 +#define FMN_STNID_GMACRFR_0 97 +#define FMN_STNID_GMACTX0 98 +#define FMN_STNID_GMACTX1 99 +#define FMN_STNID_GMACTX2 100 +#define FMN_STNID_GMACTX3 101 +#define FMN_STNID_GMACJFR_1 102 +#define FMN_STNID_GMACRFR_1 103 + +#define FMN_STNID_DMA 104 +#define FMN_STNID_DMA_0 104 +#define FMN_STNID_DMA_1 105 +#define FMN_STNID_DMA_2 106 +#define FMN_STNID_DMA_3 107 + +#define FMN_STNID_XGS0FR 112 +#define FMN_STNID_XMAC0JFR 112 +#define FMN_STNID_XMAC0RFR 113 + +#define FMN_STNID_XGS1FR 114 +#define FMN_STNID_XMAC1JFR 114 +#define FMN_STNID_XMAC1RFR 115 +#define FMN_STNID_SEC 120 +#define FMN_STNID_SEC0 120 +#define FMN_STNID_SEC1 121 +#define FMN_STNID_SEC2 122 +#define FMN_STNID_SEC3 123 +#define FMN_STNID_PK0 124 +#define FMN_STNID_SEC_RSA 124 +#define FMN_STNID_SEC_RSVD0 125 +#define FMN_STNID_SEC_RSVD1 126 +#define FMN_STNID_SEC_RSVD2 127 + +#define FMN_STNID_GMAC1 80 +#define FMN_STNID_GMAC1_FR_0 81 +#define FMN_STNID_GMAC1_TX0 82 +#define FMN_STNID_GMAC1_TX1 83 +#define FMN_STNID_GMAC1_TX2 84 +#define FMN_STNID_GMAC1_TX3 85 +#define FMN_STNID_GMAC1_FR_1 87 +#define FMN_STNID_GMAC0 96 +#define FMN_STNID_GMAC0_FR_0 97 +#define FMN_STNID_GMAC0_TX0 98 +#define FMN_STNID_GMAC0_TX1 99 +#define FMN_STNID_GMAC0_TX2 100 +#define FMN_STNID_GMAC0_TX3 101 +#define FMN_STNID_GMAC0_FR_1 103 +#define FMN_STNID_CMP_0 108 +#define FMN_STNID_CMP_1 109 +#define FMN_STNID_CMP_2 110 +#define FMN_STNID_CMP_3 111 +#define FMN_STNID_PCIE_0 116 +#define FMN_STNID_PCIE_1 117 +#define FMN_STNID_PCIE_2 118 +#define FMN_STNID_PCIE_3 119 +#define FMN_STNID_XLS_PK0 121 #define nlm_read_c2_cc0(s) __read_32bit_c2_register($16, s) #define nlm_read_c2_cc1(s) __read_32bit_c2_register($17, s) @@ -175,25 +175,25 @@ #define nlm_write_c2_cc14(s, v) __write_32bit_c2_register($30, s, v) #define nlm_write_c2_cc15(s, v) __write_32bit_c2_register($31, s, v) -#define nlm_read_c2_status(sel) __read_32bit_c2_register($2, 0) -#define nlm_read_c2_config() __read_32bit_c2_register($3, 0) -#define nlm_write_c2_config(v) __write_32bit_c2_register($3, 0, v) -#define nlm_read_c2_bucksize(b) __read_32bit_c2_register($4, b) -#define nlm_write_c2_bucksize(b, v) __write_32bit_c2_register($4, b, v) - -#define nlm_read_c2_rx_msg0() __read_64bit_c2_register($1, 0) -#define nlm_read_c2_rx_msg1() __read_64bit_c2_register($1, 1) -#define nlm_read_c2_rx_msg2() __read_64bit_c2_register($1, 2) -#define nlm_read_c2_rx_msg3() __read_64bit_c2_register($1, 3) - -#define nlm_write_c2_tx_msg0(v) __write_64bit_c2_register($0, 0, v) -#define nlm_write_c2_tx_msg1(v) __write_64bit_c2_register($0, 1, v) -#define nlm_write_c2_tx_msg2(v) __write_64bit_c2_register($0, 2, v) -#define nlm_write_c2_tx_msg3(v) __write_64bit_c2_register($0, 3, v) - -#define FMN_STN_RX_QSIZE 256 -#define FMN_NSTATIONS 128 -#define FMN_CORE_NBUCKETS 8 +#define nlm_read_c2_status(sel) __read_32bit_c2_register($2, 0) +#define nlm_read_c2_config() __read_32bit_c2_register($3, 0) +#define nlm_write_c2_config(v) __write_32bit_c2_register($3, 0, v) +#define nlm_read_c2_bucksize(b) __read_32bit_c2_register($4, b) +#define nlm_write_c2_bucksize(b, v) __write_32bit_c2_register($4, b, v) + +#define nlm_read_c2_rx_msg0() __read_64bit_c2_register($1, 0) +#define nlm_read_c2_rx_msg1() __read_64bit_c2_register($1, 1) +#define nlm_read_c2_rx_msg2() __read_64bit_c2_register($1, 2) +#define nlm_read_c2_rx_msg3() __read_64bit_c2_register($1, 3) + +#define nlm_write_c2_tx_msg0(v) __write_64bit_c2_register($0, 0, v) +#define nlm_write_c2_tx_msg1(v) __write_64bit_c2_register($0, 1, v) +#define nlm_write_c2_tx_msg2(v) __write_64bit_c2_register($0, 2, v) +#define nlm_write_c2_tx_msg3(v) __write_64bit_c2_register($0, 3, v) + +#define FMN_STN_RX_QSIZE 256 +#define FMN_NSTATIONS 128 +#define FMN_CORE_NBUCKETS 8 static inline void nlm_msgsnd(unsigned int stid) { diff --git a/arch/mips/include/asm/netlogic/xlr/iomap.h b/arch/mips/include/asm/netlogic/xlr/iomap.h index 2e768f0..ff4533d 100644 --- a/arch/mips/include/asm/netlogic/xlr/iomap.h +++ b/arch/mips/include/asm/netlogic/xlr/iomap.h @@ -35,66 +35,66 @@ #ifndef _ASM_NLM_IOMAP_H #define _ASM_NLM_IOMAP_H -#define DEFAULT_NETLOGIC_IO_BASE CKSEG1ADDR(0x1ef00000) -#define NETLOGIC_IO_DDR2_CHN0_OFFSET 0x01000 -#define NETLOGIC_IO_DDR2_CHN1_OFFSET 0x02000 -#define NETLOGIC_IO_DDR2_CHN2_OFFSET 0x03000 -#define NETLOGIC_IO_DDR2_CHN3_OFFSET 0x04000 -#define NETLOGIC_IO_PIC_OFFSET 0x08000 -#define NETLOGIC_IO_UART_0_OFFSET 0x14000 -#define NETLOGIC_IO_UART_1_OFFSET 0x15100 +#define DEFAULT_NETLOGIC_IO_BASE CKSEG1ADDR(0x1ef00000) +#define NETLOGIC_IO_DDR2_CHN0_OFFSET 0x01000 +#define NETLOGIC_IO_DDR2_CHN1_OFFSET 0x02000 +#define NETLOGIC_IO_DDR2_CHN2_OFFSET 0x03000 +#define NETLOGIC_IO_DDR2_CHN3_OFFSET 0x04000 +#define NETLOGIC_IO_PIC_OFFSET 0x08000 +#define NETLOGIC_IO_UART_0_OFFSET 0x14000 +#define NETLOGIC_IO_UART_1_OFFSET 0x15100 -#define NETLOGIC_IO_SIZE 0x1000 +#define NETLOGIC_IO_SIZE 0x1000 -#define NETLOGIC_IO_BRIDGE_OFFSET 0x00000 +#define NETLOGIC_IO_BRIDGE_OFFSET 0x00000 -#define NETLOGIC_IO_RLD2_CHN0_OFFSET 0x05000 -#define NETLOGIC_IO_RLD2_CHN1_OFFSET 0x06000 +#define NETLOGIC_IO_RLD2_CHN0_OFFSET 0x05000 +#define NETLOGIC_IO_RLD2_CHN1_OFFSET 0x06000 -#define NETLOGIC_IO_SRAM_OFFSET 0x07000 +#define NETLOGIC_IO_SRAM_OFFSET 0x07000 -#define NETLOGIC_IO_PCIX_OFFSET 0x09000 -#define NETLOGIC_IO_HT_OFFSET 0x0A000 +#define NETLOGIC_IO_PCIX_OFFSET 0x09000 +#define NETLOGIC_IO_HT_OFFSET 0x0A000 -#define NETLOGIC_IO_SECURITY_OFFSET 0x0B000 +#define NETLOGIC_IO_SECURITY_OFFSET 0x0B000 -#define NETLOGIC_IO_GMAC_0_OFFSET 0x0C000 -#define NETLOGIC_IO_GMAC_1_OFFSET 0x0D000 -#define NETLOGIC_IO_GMAC_2_OFFSET 0x0E000 -#define NETLOGIC_IO_GMAC_3_OFFSET 0x0F000 +#define NETLOGIC_IO_GMAC_0_OFFSET 0x0C000 +#define NETLOGIC_IO_GMAC_1_OFFSET 0x0D000 +#define NETLOGIC_IO_GMAC_2_OFFSET 0x0E000 +#define NETLOGIC_IO_GMAC_3_OFFSET 0x0F000 /* XLS devices */ -#define NETLOGIC_IO_GMAC_4_OFFSET 0x20000 -#define NETLOGIC_IO_GMAC_5_OFFSET 0x21000 -#define NETLOGIC_IO_GMAC_6_OFFSET 0x22000 -#define NETLOGIC_IO_GMAC_7_OFFSET 0x23000 +#define NETLOGIC_IO_GMAC_4_OFFSET 0x20000 +#define NETLOGIC_IO_GMAC_5_OFFSET 0x21000 +#define NETLOGIC_IO_GMAC_6_OFFSET 0x22000 +#define NETLOGIC_IO_GMAC_7_OFFSET 0x23000 -#define NETLOGIC_IO_PCIE_0_OFFSET 0x1E000 -#define NETLOGIC_IO_PCIE_1_OFFSET 0x1F000 -#define NETLOGIC_IO_SRIO_0_OFFSET 0x1E000 -#define NETLOGIC_IO_SRIO_1_OFFSET 0x1F000 +#define NETLOGIC_IO_PCIE_0_OFFSET 0x1E000 +#define NETLOGIC_IO_PCIE_1_OFFSET 0x1F000 +#define NETLOGIC_IO_SRIO_0_OFFSET 0x1E000 +#define NETLOGIC_IO_SRIO_1_OFFSET 0x1F000 -#define NETLOGIC_IO_USB_0_OFFSET 0x24000 -#define NETLOGIC_IO_USB_1_OFFSET 0x25000 +#define NETLOGIC_IO_USB_0_OFFSET 0x24000 +#define NETLOGIC_IO_USB_1_OFFSET 0x25000 -#define NETLOGIC_IO_COMP_OFFSET 0x1D000 +#define NETLOGIC_IO_COMP_OFFSET 0x1D000 /* end XLS devices */ /* XLR devices */ -#define NETLOGIC_IO_SPI4_0_OFFSET 0x10000 -#define NETLOGIC_IO_XGMAC_0_OFFSET 0x11000 -#define NETLOGIC_IO_SPI4_1_OFFSET 0x12000 -#define NETLOGIC_IO_XGMAC_1_OFFSET 0x13000 +#define NETLOGIC_IO_SPI4_0_OFFSET 0x10000 +#define NETLOGIC_IO_XGMAC_0_OFFSET 0x11000 +#define NETLOGIC_IO_SPI4_1_OFFSET 0x12000 +#define NETLOGIC_IO_XGMAC_1_OFFSET 0x13000 /* end XLR devices */ -#define NETLOGIC_IO_I2C_0_OFFSET 0x16000 -#define NETLOGIC_IO_I2C_1_OFFSET 0x17000 +#define NETLOGIC_IO_I2C_0_OFFSET 0x16000 +#define NETLOGIC_IO_I2C_1_OFFSET 0x17000 -#define NETLOGIC_IO_GPIO_OFFSET 0x18000 -#define NETLOGIC_IO_FLASH_OFFSET 0x19000 -#define NETLOGIC_IO_TB_OFFSET 0x1C000 +#define NETLOGIC_IO_GPIO_OFFSET 0x18000 +#define NETLOGIC_IO_FLASH_OFFSET 0x19000 +#define NETLOGIC_IO_TB_OFFSET 0x1C000 -#define NETLOGIC_CPLD_OFFSET KSEG1ADDR(0x1d840000) +#define NETLOGIC_CPLD_OFFSET KSEG1ADDR(0x1d840000) /* * Base Address (Virtual) of the PCI Config address space @@ -102,8 +102,8 @@ * Config space spans 256 (num of buses) * 256 (num functions) * 256 bytes * ie 1<<24 = 16M */ -#define DEFAULT_PCI_CONFIG_BASE 0x18000000 -#define DEFAULT_HT_TYPE0_CFG_BASE 0x16000000 -#define DEFAULT_HT_TYPE1_CFG_BASE 0x17000000 +#define DEFAULT_PCI_CONFIG_BASE 0x18000000 +#define DEFAULT_HT_TYPE0_CFG_BASE 0x16000000 +#define DEFAULT_HT_TYPE1_CFG_BASE 0x17000000 #endif diff --git a/arch/mips/include/asm/netlogic/xlr/msidef.h b/arch/mips/include/asm/netlogic/xlr/msidef.h index 7e39d40..c95d18e 100644 --- a/arch/mips/include/asm/netlogic/xlr/msidef.h +++ b/arch/mips/include/asm/netlogic/xlr/msidef.h @@ -45,21 +45,21 @@ */ #define MSI_DATA_VECTOR_SHIFT 0 -#define MSI_DATA_VECTOR_MASK 0x000000ff +#define MSI_DATA_VECTOR_MASK 0x000000ff #define MSI_DATA_VECTOR(v) (((v) << MSI_DATA_VECTOR_SHIFT) & \ MSI_DATA_VECTOR_MASK) #define MSI_DATA_DELIVERY_MODE_SHIFT 8 -#define MSI_DATA_DELIVERY_FIXED (0 << MSI_DATA_DELIVERY_MODE_SHIFT) -#define MSI_DATA_DELIVERY_LOWPRI (1 << MSI_DATA_DELIVERY_MODE_SHIFT) +#define MSI_DATA_DELIVERY_FIXED (0 << MSI_DATA_DELIVERY_MODE_SHIFT) +#define MSI_DATA_DELIVERY_LOWPRI (1 << MSI_DATA_DELIVERY_MODE_SHIFT) #define MSI_DATA_LEVEL_SHIFT 14 #define MSI_DATA_LEVEL_DEASSERT (0 << MSI_DATA_LEVEL_SHIFT) #define MSI_DATA_LEVEL_ASSERT (1 << MSI_DATA_LEVEL_SHIFT) #define MSI_DATA_TRIGGER_SHIFT 15 -#define MSI_DATA_TRIGGER_EDGE (0 << MSI_DATA_TRIGGER_SHIFT) -#define MSI_DATA_TRIGGER_LEVEL (1 << MSI_DATA_TRIGGER_SHIFT) +#define MSI_DATA_TRIGGER_EDGE (0 << MSI_DATA_TRIGGER_SHIFT) +#define MSI_DATA_TRIGGER_LEVEL (1 << MSI_DATA_TRIGGER_SHIFT) /* * Shift/mask fields for msi address @@ -69,16 +69,16 @@ #define MSI_ADDR_BASE_LO 0xfee00000 #define MSI_ADDR_DEST_MODE_SHIFT 2 -#define MSI_ADDR_DEST_MODE_PHYSICAL (0 << MSI_ADDR_DEST_MODE_SHIFT) +#define MSI_ADDR_DEST_MODE_PHYSICAL (0 << MSI_ADDR_DEST_MODE_SHIFT) #define MSI_ADDR_DEST_MODE_LOGICAL (1 << MSI_ADDR_DEST_MODE_SHIFT) #define MSI_ADDR_REDIRECTION_SHIFT 3 -#define MSI_ADDR_REDIRECTION_CPU (0 << MSI_ADDR_REDIRECTION_SHIFT) -#define MSI_ADDR_REDIRECTION_LOWPRI (1 << MSI_ADDR_REDIRECTION_SHIFT) +#define MSI_ADDR_REDIRECTION_CPU (0 << MSI_ADDR_REDIRECTION_SHIFT) +#define MSI_ADDR_REDIRECTION_LOWPRI (1 << MSI_ADDR_REDIRECTION_SHIFT) #define MSI_ADDR_DEST_ID_SHIFT 12 #define MSI_ADDR_DEST_ID_MASK 0x00ffff0 -#define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & \ +#define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & \ MSI_ADDR_DEST_ID_MASK) #endif /* ASM_RMI_MSIDEF_H */ diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h index 9a691b1..63c9917 100644 --- a/arch/mips/include/asm/netlogic/xlr/pic.h +++ b/arch/mips/include/asm/netlogic/xlr/pic.h @@ -35,10 +35,11 @@ #ifndef _ASM_NLM_XLR_PIC_H #define _ASM_NLM_XLR_PIC_H -#define PIC_CLKS_PER_SEC 66666666ULL +#define PIC_CLK_HZ 66666666 /* PIC hardware interrupt numbers */ #define PIC_IRT_WD_INDEX 0 #define PIC_IRT_TIMER_0_INDEX 1 +#define PIC_IRT_TIMER_INDEX(i) ((i) + PIC_IRT_TIMER_0_INDEX) #define PIC_IRT_TIMER_1_INDEX 2 #define PIC_IRT_TIMER_2_INDEX 3 #define PIC_IRT_TIMER_3_INDEX 4 @@ -99,6 +100,7 @@ /* PIC Registers */ #define PIC_CTRL 0x00 +#define PIC_CTRL_STE 8 /* timer enable start bit */ #define PIC_IPI 0x04 #define PIC_INT_ACK 0x06 @@ -116,7 +118,7 @@ #define PIC_TIMER_COUNT_0_BASE 0x120 #define PIC_TIMER_COUNT_1_BASE 0x130 -#define PIC_IRT_0(picintr) (PIC_IRT_0_BASE + (picintr)) +#define PIC_IRT_0(picintr) (PIC_IRT_0_BASE + (picintr)) #define PIC_IRT_1(picintr) (PIC_IRT_1_BASE + (picintr)) #define PIC_TIMER_MAXVAL_0(i) (PIC_TIMER_MAXVAL_0_BASE + (i)) @@ -130,9 +132,9 @@ * 8-39. This leaves the IRQ 0-7 for cpu interrupts like * count/compare and FMN */ -#define PIC_IRQ_BASE 8 -#define PIC_INTR_TO_IRQ(i) (PIC_IRQ_BASE + (i)) -#define PIC_IRQ_TO_INTR(i) ((i) - PIC_IRQ_BASE) +#define PIC_IRQ_BASE 8 +#define PIC_INTR_TO_IRQ(i) (PIC_IRQ_BASE + (i)) +#define PIC_IRQ_TO_INTR(i) ((i) - PIC_IRQ_BASE) #define PIC_IRT_FIRST_IRQ PIC_IRQ_BASE #define PIC_WD_IRQ PIC_INTR_TO_IRQ(PIC_IRT_WD_INDEX) @@ -168,7 +170,7 @@ #define PIC_BRIDGE_AERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_INDEX) #define PIC_BRIDGE_BERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_BERR_INDEX) #define PIC_BRIDGE_TB_XLR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLR_INDEX) -#define PIC_BRIDGE_AERR_NMI_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_NMI_INDEX) +#define PIC_BRIDGE_AERR_NMI_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_NMI_INDEX) /* XLS defines */ #define PIC_GMAC_4_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC4_INDEX) #define PIC_GMAC_5_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC5_INDEX) @@ -251,12 +253,52 @@ nlm_pic_ack(uint64_t base, int irt) } static inline void -nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt) +nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt, int en) { nlm_write_reg(base, PIC_IRT_0(irt), (1u << hwt)); /* local scheduling, invalid, level by default */ nlm_write_reg(base, PIC_IRT_1(irt), - (1 << 30) | (1 << 6) | irq); + (en << 30) | (1 << 6) | irq); +} + +static inline uint64_t +nlm_pic_read_timer(uint64_t base, int timer) +{ + uint32_t up1, up2, low; + + up1 = nlm_read_reg(base, PIC_TIMER_COUNT_1(timer)); + low = nlm_read_reg(base, PIC_TIMER_COUNT_0(timer)); + up2 = nlm_read_reg(base, PIC_TIMER_COUNT_1(timer)); + + if (up1 != up2) /* wrapped, get the new low */ + low = nlm_read_reg(base, PIC_TIMER_COUNT_0(timer)); + return ((uint64_t)up2 << 32) | low; + +} + +static inline uint32_t +nlm_pic_read_timer32(uint64_t base, int timer) +{ + return nlm_read_reg(base, PIC_TIMER_COUNT_0(timer)); +} + +static inline void +nlm_pic_set_timer(uint64_t base, int timer, uint64_t value, int irq, int cpu) +{ + uint32_t up, low; + uint64_t pic_ctrl = nlm_read_reg(base, PIC_CTRL); + int en; + + en = (irq > 0); + up = value >> 32; + low = value & 0xFFFFFFFF; + nlm_write_reg(base, PIC_TIMER_MAXVAL_0(timer), low); + nlm_write_reg(base, PIC_TIMER_MAXVAL_1(timer), up); + nlm_pic_init_irt(base, PIC_IRT_TIMER_INDEX(timer), irq, cpu, 0); + + /* enable the timer */ + pic_ctrl |= (1 << (PIC_CTRL_STE + timer)); + nlm_write_reg(base, PIC_CTRL, pic_ctrl); } #endif #endif /* _ASM_NLM_XLR_PIC_H */ diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h index af0e51a..2e2436d 100644 --- a/arch/mips/include/asm/nile4.h +++ b/arch/mips/include/asm/nile4.h @@ -2,7 +2,7 @@ * asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions * * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels + * Sony Software Development Center Europe (SDCE), Brussels * * This file is based on the following documentation: * @@ -17,7 +17,7 @@ /* - * Physical Device Address Registers (PDARs) + * Physical Device Address Registers (PDARs) */ #define NILE4_SDRAM0 0x0000 /* SDRAM Bank 0 [R/W] */ @@ -37,7 +37,7 @@ /* - * CPU Interface Registers + * CPU Interface Registers */ #define NILE4_CPUSTAT 0x0080 /* CPU Status [R/W] */ @@ -50,7 +50,7 @@ /* - * Memory-Interface Registers + * Memory-Interface Registers */ #define NILE4_MEMCTRL 0x00C0 /* Memory Control */ @@ -59,7 +59,7 @@ /* - * PCI-Bus Registers + * PCI-Bus Registers */ #define NILE4_PCICTRL 0x00E0 /* PCI Control [R/W] */ @@ -70,7 +70,7 @@ /* - * Local-Bus Registers + * Local-Bus Registers */ #define NILE4_LCNFG 0x0100 /* Local Bus Configuration [R/W] */ @@ -88,7 +88,7 @@ /* - * DMA Registers + * DMA Registers */ #define NILE4_DMACTRL0 0x0180 /* DMA Control 0 [R/W] */ @@ -100,7 +100,7 @@ /* - * Timer Registers + * Timer Registers */ #define NILE4_T0CTRL 0x01C0 /* SDRAM Refresh Control [R/W] */ @@ -114,7 +114,7 @@ /* - * PCI Configuration Space Registers + * PCI Configuration Space Registers */ #define NILE4_PCI_BASE 0x0200 @@ -153,10 +153,10 @@ /* - * Serial-Port Registers + * Serial-Port Registers */ -#define NILE4_UART_BASE 0x0300 +#define NILE4_UART_BASE 0x0300 #define NILE4_UARTRBR 0x0300 /* UART Receiver Data Buffer [R] */ #define NILE4_UARTTHR 0x0300 /* UART Transmitter Data Holding [W] */ @@ -175,7 +175,7 @@ /* - * Interrupt Lines + * Interrupt Lines */ #define NILE4_INT_CPCE 0 /* CPU-Interface Parity-Error Interrupt */ @@ -185,7 +185,7 @@ #define NILE4_INT_UART 4 /* UART Interrupt */ #define NILE4_INT_WDOG 5 /* Watchdog Timer Interrupt */ #define NILE4_INT_GPT 6 /* General-Purpose Timer Interrupt */ -#define NILE4_INT_LBRTD 7 /* Local-Bus Ready Timer Interrupt */ +#define NILE4_INT_LBRTD 7 /* Local-Bus Ready Timer Interrupt */ #define NILE4_INT_INTA 8 /* PCI Interrupt Signal INTA# */ #define NILE4_INT_INTB 9 /* PCI Interrupt Signal INTB# */ #define NILE4_INT_INTC 10 /* PCI Interrupt Signal INTC# */ @@ -197,7 +197,7 @@ /* - * Nile 4 Register Access + * Nile 4 Register Access */ static inline void nile4_sync(void) @@ -247,7 +247,7 @@ static inline u8 nile4_in8(u32 offset) /* - * Physical Device Address Registers + * Physical Device Address Registers */ extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width, @@ -255,7 +255,7 @@ extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width, /* - * PCI Master Registers + * PCI Master Registers */ #define NILE4_PCICMD_IACK 0 /* PCI Interrupt Acknowledge */ @@ -265,9 +265,9 @@ extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width, /* - * PCI Address Spaces + * PCI Address Spaces * - * Note that these are multiplexed using PCIINIT[01]! + * Note that these are multiplexed using PCIINIT[01]! */ #define NILE4_PCI_IO_BASE 0xa6000000 @@ -280,7 +280,7 @@ extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr); /* - * Interrupt Programming + * Interrupt Programming */ #define NUM_I8259_INTERRUPTS 16 diff --git a/arch/mips/include/asm/octeon/cvmx-address.h b/arch/mips/include/asm/octeon/cvmx-address.h index 3c74d82..e2d874e 100644 --- a/arch/mips/include/asm/octeon/cvmx-address.h +++ b/arch/mips/include/asm/octeon/cvmx-address.h @@ -84,20 +84,20 @@ typedef enum { * Octeon-I HW never interprets this X (<39:36> reserved * for future expansion), software should set to 0. * - * - 0x0 XXX0 0000 0000 to DRAM Cached + * - 0x0 XXX0 0000 0000 to DRAM Cached * - 0x0 XXX0 0FFF FFFF * - * - 0x0 XXX0 1000 0000 to Boot Bus Uncached (Converted to 0x1 00X0 1000 0000 - * - 0x0 XXX0 1FFF FFFF + EJTAG to 0x1 00X0 1FFF FFFF) + * - 0x0 XXX0 1000 0000 to Boot Bus Uncached (Converted to 0x1 00X0 1000 0000 + * - 0x0 XXX0 1FFF FFFF + EJTAG to 0x1 00X0 1FFF FFFF) * - * - 0x0 XXX0 2000 0000 to DRAM Cached + * - 0x0 XXX0 2000 0000 to DRAM Cached * - 0x0 XXXF FFFF FFFF * - * - 0x1 00X0 0000 0000 to Boot Bus Uncached + * - 0x1 00X0 0000 0000 to Boot Bus Uncached * - 0x1 00XF FFFF FFFF * - * - 0x1 01X0 0000 0000 to Other NCB Uncached - * - 0x1 FFXF FFFF FFFF devices + * - 0x1 01X0 0000 0000 to Other NCB Uncached + * - 0x1 FFXF FFFF FFFF devices * * Decode of all Octeon addresses */ @@ -129,9 +129,9 @@ typedef union { */ struct { uint64_t R:2; /* CVMX_MIPS_SPACE_XKPHYS in this case */ - uint64_t cca:3; /* ignored by octeon */ + uint64_t cca:3; /* ignored by octeon */ uint64_t mbz:10; - uint64_t pa:49; /* physical address */ + uint64_t pa:49; /* physical address */ } sxkphys; /* physical address */ @@ -253,22 +253,22 @@ typedef union { #define CVMX_OCT_DID_ASX1 23ULL #define CVMX_OCT_DID_IOB 30ULL -#define CVMX_OCT_DID_PKT_SEND CVMX_FULL_DID(CVMX_OCT_DID_PKT, 2ULL) -#define CVMX_OCT_DID_TAG_SWTAG CVMX_FULL_DID(CVMX_OCT_DID_TAG, 0ULL) -#define CVMX_OCT_DID_TAG_TAG1 CVMX_FULL_DID(CVMX_OCT_DID_TAG, 1ULL) -#define CVMX_OCT_DID_TAG_TAG2 CVMX_FULL_DID(CVMX_OCT_DID_TAG, 2ULL) -#define CVMX_OCT_DID_TAG_TAG3 CVMX_FULL_DID(CVMX_OCT_DID_TAG, 3ULL) +#define CVMX_OCT_DID_PKT_SEND CVMX_FULL_DID(CVMX_OCT_DID_PKT, 2ULL) +#define CVMX_OCT_DID_TAG_SWTAG CVMX_FULL_DID(CVMX_OCT_DID_TAG, 0ULL) +#define CVMX_OCT_DID_TAG_TAG1 CVMX_FULL_DID(CVMX_OCT_DID_TAG, 1ULL) +#define CVMX_OCT_DID_TAG_TAG2 CVMX_FULL_DID(CVMX_OCT_DID_TAG, 2ULL) +#define CVMX_OCT_DID_TAG_TAG3 CVMX_FULL_DID(CVMX_OCT_DID_TAG, 3ULL) #define CVMX_OCT_DID_TAG_NULL_RD CVMX_FULL_DID(CVMX_OCT_DID_TAG, 4ULL) -#define CVMX_OCT_DID_TAG_CSR CVMX_FULL_DID(CVMX_OCT_DID_TAG, 7ULL) -#define CVMX_OCT_DID_FAU_FAI CVMX_FULL_DID(CVMX_OCT_DID_IOB, 0ULL) -#define CVMX_OCT_DID_TIM_CSR CVMX_FULL_DID(CVMX_OCT_DID_TIM, 0ULL) -#define CVMX_OCT_DID_KEY_RW CVMX_FULL_DID(CVMX_OCT_DID_KEY, 0ULL) -#define CVMX_OCT_DID_PCI_6 CVMX_FULL_DID(CVMX_OCT_DID_PCI, 6ULL) -#define CVMX_OCT_DID_MIS_BOO CVMX_FULL_DID(CVMX_OCT_DID_MIS, 0ULL) -#define CVMX_OCT_DID_PCI_RML CVMX_FULL_DID(CVMX_OCT_DID_PCI, 0ULL) -#define CVMX_OCT_DID_IPD_CSR CVMX_FULL_DID(CVMX_OCT_DID_IPD, 7ULL) -#define CVMX_OCT_DID_DFA_CSR CVMX_FULL_DID(CVMX_OCT_DID_DFA, 7ULL) -#define CVMX_OCT_DID_MIS_CSR CVMX_FULL_DID(CVMX_OCT_DID_MIS, 7ULL) -#define CVMX_OCT_DID_ZIP_CSR CVMX_FULL_DID(CVMX_OCT_DID_ZIP, 0ULL) +#define CVMX_OCT_DID_TAG_CSR CVMX_FULL_DID(CVMX_OCT_DID_TAG, 7ULL) +#define CVMX_OCT_DID_FAU_FAI CVMX_FULL_DID(CVMX_OCT_DID_IOB, 0ULL) +#define CVMX_OCT_DID_TIM_CSR CVMX_FULL_DID(CVMX_OCT_DID_TIM, 0ULL) +#define CVMX_OCT_DID_KEY_RW CVMX_FULL_DID(CVMX_OCT_DID_KEY, 0ULL) +#define CVMX_OCT_DID_PCI_6 CVMX_FULL_DID(CVMX_OCT_DID_PCI, 6ULL) +#define CVMX_OCT_DID_MIS_BOO CVMX_FULL_DID(CVMX_OCT_DID_MIS, 0ULL) +#define CVMX_OCT_DID_PCI_RML CVMX_FULL_DID(CVMX_OCT_DID_PCI, 0ULL) +#define CVMX_OCT_DID_IPD_CSR CVMX_FULL_DID(CVMX_OCT_DID_IPD, 7ULL) +#define CVMX_OCT_DID_DFA_CSR CVMX_FULL_DID(CVMX_OCT_DID_DFA, 7ULL) +#define CVMX_OCT_DID_MIS_CSR CVMX_FULL_DID(CVMX_OCT_DID_MIS, 7ULL) +#define CVMX_OCT_DID_ZIP_CSR CVMX_FULL_DID(CVMX_OCT_DID_ZIP, 0ULL) #endif /* __CVMX_ADDRESS_H__ */ diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h index 1db1dc2..284fa8d 100644 --- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h +++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h @@ -91,11 +91,11 @@ struct cvmx_bootinfo { #if (CVMX_BOOTINFO_MIN_VER >= 1) /* * Several boards support compact flash on the Octeon boot - * bus. The CF memory spaces may be mapped to different + * bus. The CF memory spaces may be mapped to different * addresses on different boards. These are the physical * addresses, so care must be taken to use the correct * XKPHYS/KSEG0 addressing depending on the application's - * ABI. These values will be 0 if CF is not present. + * ABI. These values will be 0 if CF is not present. */ uint64_t compact_flash_common_base_addr; uint64_t compact_flash_attribute_base_addr; @@ -131,7 +131,7 @@ struct cvmx_bootinfo { #define CVMX_BOOTINFO_CFG_FLAG_NO_MAGIC (1ull << 3) /* This flag is set if the TLB mappings are not contained in the * 0x10000000 - 0x20000000 boot bus region. */ -#define CVMX_BOOTINFO_CFG_FLAG_OVERSIZE_TLB_MAPPING (1ull << 4) +#define CVMX_BOOTINFO_CFG_FLAG_OVERSIZE_TLB_MAPPING (1ull << 4) #define CVMX_BOOTINFO_CFG_FLAG_BREAK (1ull << 5) #endif /* (CVMX_BOOTINFO_MAJ_VER == 1) */ @@ -164,9 +164,9 @@ enum cvmx_board_types_enum { CVMX_BOARD_TYPE_EBT5600 = 22, CVMX_BOARD_TYPE_EBH5201 = 23, CVMX_BOARD_TYPE_EBT5200 = 24, - CVMX_BOARD_TYPE_CB5600 = 25, - CVMX_BOARD_TYPE_CB5601 = 26, - CVMX_BOARD_TYPE_CB5200 = 27, + CVMX_BOARD_TYPE_CB5600 = 25, + CVMX_BOARD_TYPE_CB5601 = 26, + CVMX_BOARD_TYPE_CB5200 = 27, /* Special 'generic' board type, supports many boards */ CVMX_BOARD_TYPE_GENERIC = 28, CVMX_BOARD_TYPE_EBH5610 = 29, @@ -223,7 +223,7 @@ enum cvmx_board_types_enum { CVMX_BOARD_TYPE_CUST_DEFINED_MAX = 20000, /* - * Set aside a range for customer private use. The SDK won't + * Set aside a range for customer private use. The SDK won't * use any numbers in this range. */ CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001, diff --git a/arch/mips/include/asm/octeon/cvmx-bootmem.h b/arch/mips/include/asm/octeon/cvmx-bootmem.h index 42db2be..352f1dc 100644 --- a/arch/mips/include/asm/octeon/cvmx-bootmem.h +++ b/arch/mips/include/asm/octeon/cvmx-bootmem.h @@ -39,7 +39,7 @@ #define CVMX_BOOTMEM_NUM_NAMED_BLOCKS 64 /* minimum alignment of bootmem alloced blocks */ -#define CVMX_BOOTMEM_ALIGNMENT_SIZE (16ull) +#define CVMX_BOOTMEM_ALIGNMENT_SIZE (16ull) /* Flags for cvmx_bootmem_phy_mem* functions */ /* Allocate from end of block instead of beginning */ @@ -151,8 +151,8 @@ extern void *cvmx_bootmem_alloc(uint64_t size, uint64_t alignment); * memory cannot be allocated at the specified address. * * @size: Size in bytes of block to allocate - * @address: Physical address to allocate memory at. If this memory is not - * available, the allocation fails. + * @address: Physical address to allocate memory at. If this memory is not + * available, the allocation fails. * @alignment: Alignment required - must be power of 2 * Returns pointer to block of memory, NULL on error */ @@ -181,7 +181,7 @@ extern void *cvmx_bootmem_alloc_range(uint64_t size, uint64_t alignment, * @name: name of block to free * * Returns 0 on failure, - * !0 on success + * !0 on success */ @@ -210,9 +210,9 @@ extern void *cvmx_bootmem_alloc_named(uint64_t size, uint64_t alignment, * * @size: Size in bytes of block to allocate * @address: Physical address to allocate memory at. If this - * memory is not available, the allocation fails. + * memory is not available, the allocation fails. * @name: name of block - must be less than CVMX_BOOTMEM_NAME_LEN - * bytes + * bytes * * Returns a pointer to block of memory, NULL on error */ @@ -249,7 +249,7 @@ extern int cvmx_bootmem_free_named(char *name); * @name: name of block to free * * Returns pointer to named block descriptor on success - * 0 on failure + * 0 on failure */ struct cvmx_bootmem_named_block_desc *cvmx_bootmem_find_named_block(char *name); @@ -258,20 +258,20 @@ struct cvmx_bootmem_named_block_desc *cvmx_bootmem_find_named_block(char *name); * (optional) requested address and alignment. * * @req_size: size of region to allocate. All requests are rounded up - * to be a multiple CVMX_BOOTMEM_ALIGNMENT_SIZE bytes size + * to be a multiple CVMX_BOOTMEM_ALIGNMENT_SIZE bytes size * * @address_min: Minimum address that block can occupy. * * @address_max: Specifies the maximum address_min (inclusive) that - * the allocation can use. + * the allocation can use. * * @alignment: Requested alignment of the block. If this alignment - * cannot be met, the allocation fails. This must be a - * power of 2. (Note: Alignment of - * CVMX_BOOTMEM_ALIGNMENT_SIZE bytes is required, and - * internally enforced. Requested alignments of less than - * CVMX_BOOTMEM_ALIGNMENT_SIZE are set to - * CVMX_BOOTMEM_ALIGNMENT_SIZE.) + * cannot be met, the allocation fails. This must be a + * power of 2. (Note: Alignment of + * CVMX_BOOTMEM_ALIGNMENT_SIZE bytes is required, and + * internally enforced. Requested alignments of less than + * CVMX_BOOTMEM_ALIGNMENT_SIZE are set to + * CVMX_BOOTMEM_ALIGNMENT_SIZE.) * * @flags: Flags to control options for the allocation. * @@ -285,21 +285,21 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min, * Allocates a named block of physical memory from the free list, at * (optional) requested address and alignment. * - * @param size size of region to allocate. All requests are rounded - * up to be a multiple CVMX_BOOTMEM_ALIGNMENT_SIZE - * bytes size + * @param size size of region to allocate. All requests are rounded + * up to be a multiple CVMX_BOOTMEM_ALIGNMENT_SIZE + * bytes size * @param min_addr Minimum address that block can occupy. * @param max_addr Specifies the maximum address_min (inclusive) that - * the allocation can use. + * the allocation can use. * @param alignment Requested alignment of the block. If this - * alignment cannot be met, the allocation fails. - * This must be a power of 2. (Note: Alignment of - * CVMX_BOOTMEM_ALIGNMENT_SIZE bytes is required, and - * internally enforced. Requested alignments of less - * than CVMX_BOOTMEM_ALIGNMENT_SIZE are set to - * CVMX_BOOTMEM_ALIGNMENT_SIZE.) - * @param name name to assign to named block - * @param flags Flags to control options for the allocation. + * alignment cannot be met, the allocation fails. + * This must be a power of 2. (Note: Alignment of + * CVMX_BOOTMEM_ALIGNMENT_SIZE bytes is required, and + * internally enforced. Requested alignments of less + * than CVMX_BOOTMEM_ALIGNMENT_SIZE are set to + * CVMX_BOOTMEM_ALIGNMENT_SIZE.) + * @param name name to assign to named block + * @param flags Flags to control options for the allocation. * * @return physical address of block allocated, or -1 on failure */ @@ -312,14 +312,14 @@ int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr, * Finds a named memory block by name. * Also used for finding an unused entry in the named block table. * - * @name: Name of memory block to find. If NULL pointer given, then - * finds unused descriptor, if available. + * @name: Name of memory block to find. If NULL pointer given, then + * finds unused descriptor, if available. * * @flags: Flags to control options for the allocation. * * Returns Pointer to memory block descriptor, NULL if not found. - * If NULL returned when name parameter is NULL, then no memory - * block descriptors are available. + * If NULL returned when name parameter is NULL, then no memory + * block descriptors are available. */ struct cvmx_bootmem_named_block_desc * cvmx_bootmem_phy_named_block_find(char *name, uint32_t flags); @@ -331,31 +331,31 @@ cvmx_bootmem_phy_named_block_find(char *name, uint32_t flags); * @flags: flags for passing options * * Returns 0 on failure - * 1 on success + * 1 on success */ int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags); /** - * Frees a block to the bootmem allocator list. This must + * Frees a block to the bootmem allocator list. This must * be used with care, as the size provided must match the size * of the block that was allocated, or the list will become * corrupted. * * IMPORTANT: This is only intended to be used as part of named block * frees and initial population of the free memory list. - * * + * * * * @phy_addr: physical address of block * @size: size of block in bytes. * @flags: flags for passing options * * Returns 1 on success, - * 0 on failure + * 0 on failure */ int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags); /** - * Locks the bootmem allocator. This is useful in certain situations + * Locks the bootmem allocator. This is useful in certain situations * where multiple allocations must be made without being interrupted. * This should be used with the CVMX_BOOTMEM_FLAG_NO_LOCKING flag. * diff --git a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h index fed9112..024a71b 100644 --- a/arch/mips/include/asm/octeon/cvmx-cmd-queue.h +++ b/arch/mips/include/asm/octeon/cvmx-cmd-queue.h @@ -244,33 +244,33 @@ static inline void __cvmx_cmd_queue_lock(cvmx_cmd_queue_id_t queue_id, ".set noreorder\n" "1:\n" /* Atomic add one to ticket_ptr */ - "ll %[my_ticket], %[ticket_ptr]\n" + "ll %[my_ticket], %[ticket_ptr]\n" /* and store the original value */ - "li %[ticket], 1\n" + "li %[ticket], 1\n" /* in my_ticket */ - "baddu %[ticket], %[my_ticket]\n" - "sc %[ticket], %[ticket_ptr]\n" - "beqz %[ticket], 1b\n" + "baddu %[ticket], %[my_ticket]\n" + "sc %[ticket], %[ticket_ptr]\n" + "beqz %[ticket], 1b\n" " nop\n" /* Load the current now_serving ticket */ - "lbu %[ticket], %[now_serving]\n" + "lbu %[ticket], %[now_serving]\n" "2:\n" /* Jump out if now_serving == my_ticket */ - "beq %[ticket], %[my_ticket], 4f\n" + "beq %[ticket], %[my_ticket], 4f\n" /* Find out how many tickets are in front of me */ - " subu %[ticket], %[my_ticket], %[ticket]\n" + " subu %[ticket], %[my_ticket], %[ticket]\n" /* Use tickets in front of me minus one to delay */ "subu %[ticket], 1\n" /* Delay will be ((tickets in front)-1)*32 loops */ - "cins %[ticket], %[ticket], 5, 7\n" + "cins %[ticket], %[ticket], 5, 7\n" "3:\n" /* Loop here until our ticket might be up */ - "bnez %[ticket], 3b\n" - " subu %[ticket], 1\n" + "bnez %[ticket], 3b\n" + " subu %[ticket], 1\n" /* Jump back up to check out ticket again */ - "b 2b\n" + "b 2b\n" /* Load the current now_serving ticket */ - " lbu %[ticket], %[now_serving]\n" + " lbu %[ticket], %[now_serving]\n" "4:\n" ".set pop\n" : [ticket_ptr] "=m"(__cvmx_cmd_queue_state_ptr->ticket[__cvmx_cmd_queue_get_index(queue_id)]), @@ -313,9 +313,9 @@ static inline __cvmx_cmd_queue_state_t * * @queue_id: Hardware command queue to write to * @use_locking: - * Use internal locking to ensure exclusive access for queue - * updates. If you don't use this locking you must ensure - * exclusivity some other way. Locking is strongly recommended. + * Use internal locking to ensure exclusive access for queue + * updates. If you don't use this locking you must ensure + * exclusivity some other way. Locking is strongly recommended. * @cmd_count: Number of command words to write * @cmds: Array of commands to write * @@ -411,9 +411,9 @@ static inline cvmx_cmd_queue_result_t cvmx_cmd_queue_write(cvmx_cmd_queue_id_t * * @queue_id: Hardware command queue to write to * @use_locking: - * Use internal locking to ensure exclusive access for queue - * updates. If you don't use this locking you must ensure - * exclusivity some other way. Locking is strongly recommended. + * Use internal locking to ensure exclusive access for queue + * updates. If you don't use this locking you must ensure + * exclusivity some other way. Locking is strongly recommended. * @cmd1: Command * @cmd2: Command * @@ -510,9 +510,9 @@ static inline cvmx_cmd_queue_result_t cvmx_cmd_queue_write2(cvmx_cmd_queue_id_t * * @queue_id: Hardware command queue to write to * @use_locking: - * Use internal locking to ensure exclusive access for queue - * updates. If you don't use this locking you must ensure - * exclusivity some other way. Locking is strongly recommended. + * Use internal locking to ensure exclusive access for queue + * updates. If you don't use this locking you must ensure + * exclusivity some other way. Locking is strongly recommended. * @cmd1: Command * @cmd2: Command * @cmd3: Command diff --git a/arch/mips/include/asm/octeon/cvmx-config.h b/arch/mips/include/asm/octeon/cvmx-config.h index 26835d1..f7dd17d 100644 --- a/arch/mips/include/asm/octeon/cvmx-config.h +++ b/arch/mips/include/asm/octeon/cvmx-config.h @@ -31,13 +31,13 @@ /* Pools in use */ /* Packet buffers */ -#define CVMX_FPA_PACKET_POOL (0) -#define CVMX_FPA_PACKET_POOL_SIZE CVMX_FPA_POOL_0_SIZE +#define CVMX_FPA_PACKET_POOL (0) +#define CVMX_FPA_PACKET_POOL_SIZE CVMX_FPA_POOL_0_SIZE /* Work queue entrys */ -#define CVMX_FPA_WQE_POOL (1) -#define CVMX_FPA_WQE_POOL_SIZE CVMX_FPA_POOL_1_SIZE +#define CVMX_FPA_WQE_POOL (1) +#define CVMX_FPA_WQE_POOL_SIZE CVMX_FPA_POOL_1_SIZE /* PKO queue command buffers */ -#define CVMX_FPA_OUTPUT_BUFFER_POOL (2) +#define CVMX_FPA_OUTPUT_BUFFER_POOL (2) #define CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE CVMX_FPA_POOL_2_SIZE /************************* FAU allocation ********************************/ @@ -45,7 +45,7 @@ * in order of descending size so that all alignment constraints are * automatically met. The enums are linked so that the following enum * continues allocating where the previous one left off, so the - * numbering within each enum always starts with zero. The macros + * numbering within each enum always starts with zero. The macros * take care of the address increment size, so the values entered * always increase by 1. FAU registers are accessed with byte * addresses. @@ -90,9 +90,9 @@ typedef enum { * be taken into account. */ /* Generic scratch iobdma area */ -#define CVMX_SCR_SCRATCH (0) +#define CVMX_SCR_SCRATCH (0) /* First location available after cvmx-config.h allocated region. */ -#define CVMX_SCR_REG_AVAIL_BASE (8) +#define CVMX_SCR_REG_AVAIL_BASE (8) /* * CVMX_HELPER_FIRST_MBUFF_SKIP is the number of bytes to reserve @@ -145,14 +145,14 @@ typedef enum { * 1: include */ #define CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP 0 -#define CVMX_HELPER_INPUT_TAG_IPV6_DST_IP 0 -#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT 0 -#define CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT 0 -#define CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER 0 +#define CVMX_HELPER_INPUT_TAG_IPV6_DST_IP 0 +#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT 0 +#define CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT 0 +#define CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER 0 #define CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP 0 -#define CVMX_HELPER_INPUT_TAG_IPV4_DST_IP 0 -#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT 0 -#define CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT 0 +#define CVMX_HELPER_INPUT_TAG_IPV4_DST_IP 0 +#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT 0 +#define CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT 0 #define CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL 0 #define CVMX_HELPER_INPUT_TAG_INPUT_PORT 1 diff --git a/arch/mips/include/asm/octeon/cvmx-fau.h b/arch/mips/include/asm/octeon/cvmx-fau.h index a6939fc..ef98f7f 100644 --- a/arch/mips/include/asm/octeon/cvmx-fau.h +++ b/arch/mips/include/asm/octeon/cvmx-fau.h @@ -37,13 +37,13 @@ */ #define CVMX_FAU_LOAD_IO_ADDRESS cvmx_build_io_address(0x1e, 0) -#define CVMX_FAU_BITS_SCRADDR 63, 56 -#define CVMX_FAU_BITS_LEN 55, 48 -#define CVMX_FAU_BITS_INEVAL 35, 14 -#define CVMX_FAU_BITS_TAGWAIT 13, 13 -#define CVMX_FAU_BITS_NOADD 13, 13 -#define CVMX_FAU_BITS_SIZE 12, 11 -#define CVMX_FAU_BITS_REGISTER 10, 0 +#define CVMX_FAU_BITS_SCRADDR 63, 56 +#define CVMX_FAU_BITS_LEN 55, 48 +#define CVMX_FAU_BITS_INEVAL 35, 14 +#define CVMX_FAU_BITS_TAGWAIT 13, 13 +#define CVMX_FAU_BITS_NOADD 13, 13 +#define CVMX_FAU_BITS_SIZE 12, 11 +#define CVMX_FAU_BITS_REGISTER 10, 0 typedef enum { CVMX_FAU_OP_SIZE_8 = 0, @@ -109,11 +109,11 @@ typedef union { * Builds a store I/O address for writing to the FAU * * @noadd: 0 = Store value is atomically added to the current value - * 1 = Store value is atomically written over the current value + * 1 = Store value is atomically written over the current value * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 2 for 16 bit access. - * - Step by 4 for 32 bit access. - * - Step by 8 for 64 bit access. + * - Step by 2 for 16 bit access. + * - Step by 4 for 32 bit access. + * - Step by 8 for 64 bit access. * Returns Address to store for atomic update */ static inline uint64_t __cvmx_fau_store_address(uint64_t noadd, uint64_t reg) @@ -127,16 +127,16 @@ static inline uint64_t __cvmx_fau_store_address(uint64_t noadd, uint64_t reg) * Builds a I/O address for accessing the FAU * * @tagwait: Should the atomic add wait for the current tag switch - * operation to complete. - * - 0 = Don't wait - * - 1 = Wait for tag switch to complete + * operation to complete. + * - 0 = Don't wait + * - 1 = Wait for tag switch to complete * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 2 for 16 bit access. - * - Step by 4 for 32 bit access. - * - Step by 8 for 64 bit access. + * - Step by 2 for 16 bit access. + * - Step by 4 for 32 bit access. + * - Step by 8 for 64 bit access. * @value: Signed value to add. - * Note: When performing 32 and 64 bit access, only the low - * 22 bits are available. + * Note: When performing 32 and 64 bit access, only the low + * 22 bits are available. * Returns Address to read from for atomic update */ static inline uint64_t __cvmx_fau_atomic_address(uint64_t tagwait, uint64_t reg, @@ -152,9 +152,9 @@ static inline uint64_t __cvmx_fau_atomic_address(uint64_t tagwait, uint64_t reg, * Perform an atomic 64 bit add * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 8 for 64 bit access. + * - Step by 8 for 64 bit access. * @value: Signed value to add. - * Note: Only the low 22 bits are available. + * Note: Only the low 22 bits are available. * Returns Value of the register before the update */ static inline int64_t cvmx_fau_fetch_and_add64(cvmx_fau_reg_64_t reg, @@ -167,9 +167,9 @@ static inline int64_t cvmx_fau_fetch_and_add64(cvmx_fau_reg_64_t reg, * Perform an atomic 32 bit add * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 4 for 32 bit access. + * - Step by 4 for 32 bit access. * @value: Signed value to add. - * Note: Only the low 22 bits are available. + * Note: Only the low 22 bits are available. * Returns Value of the register before the update */ static inline int32_t cvmx_fau_fetch_and_add32(cvmx_fau_reg_32_t reg, @@ -182,7 +182,7 @@ static inline int32_t cvmx_fau_fetch_and_add32(cvmx_fau_reg_32_t reg, * Perform an atomic 16 bit add * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 2 for 16 bit access. + * - Step by 2 for 16 bit access. * @value: Signed value to add. * Returns Value of the register before the update */ @@ -209,12 +209,12 @@ static inline int8_t cvmx_fau_fetch_and_add8(cvmx_fau_reg_8_t reg, int8_t value) * completes * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 8 for 64 bit access. + * - Step by 8 for 64 bit access. * @value: Signed value to add. - * Note: Only the low 22 bits are available. + * Note: Only the low 22 bits are available. * Returns If a timeout occurs, the error bit will be set. Otherwise - * the value of the register before the update will be - * returned + * the value of the register before the update will be + * returned */ static inline cvmx_fau_tagwait64_t cvmx_fau_tagwait_fetch_and_add64(cvmx_fau_reg_64_t reg, int64_t value) @@ -233,12 +233,12 @@ cvmx_fau_tagwait_fetch_and_add64(cvmx_fau_reg_64_t reg, int64_t value) * completes * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 4 for 32 bit access. + * - Step by 4 for 32 bit access. * @value: Signed value to add. - * Note: Only the low 22 bits are available. + * Note: Only the low 22 bits are available. * Returns If a timeout occurs, the error bit will be set. Otherwise - * the value of the register before the update will be - * returned + * the value of the register before the update will be + * returned */ static inline cvmx_fau_tagwait32_t cvmx_fau_tagwait_fetch_and_add32(cvmx_fau_reg_32_t reg, int32_t value) @@ -257,11 +257,11 @@ cvmx_fau_tagwait_fetch_and_add32(cvmx_fau_reg_32_t reg, int32_t value) * completes * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 2 for 16 bit access. + * - Step by 2 for 16 bit access. * @value: Signed value to add. * Returns If a timeout occurs, the error bit will be set. Otherwise - * the value of the register before the update will be - * returned + * the value of the register before the update will be + * returned */ static inline cvmx_fau_tagwait16_t cvmx_fau_tagwait_fetch_and_add16(cvmx_fau_reg_16_t reg, int16_t value) @@ -282,8 +282,8 @@ cvmx_fau_tagwait_fetch_and_add16(cvmx_fau_reg_16_t reg, int16_t value) * @reg: FAU atomic register to access. 0 <= reg < 2048. * @value: Signed value to add. * Returns If a timeout occurs, the error bit will be set. Otherwise - * the value of the register before the update will be - * returned + * the value of the register before the update will be + * returned */ static inline cvmx_fau_tagwait8_t cvmx_fau_tagwait_fetch_and_add8(cvmx_fau_reg_8_t reg, int8_t value) @@ -301,21 +301,21 @@ cvmx_fau_tagwait_fetch_and_add8(cvmx_fau_reg_8_t reg, int8_t value) * * @scraddr: Scratch pad byte address to write to. Must be 8 byte aligned * @value: Signed value to add. - * Note: When performing 32 and 64 bit access, only the low - * 22 bits are available. + * Note: When performing 32 and 64 bit access, only the low + * 22 bits are available. * @tagwait: Should the atomic add wait for the current tag switch - * operation to complete. - * - 0 = Don't wait - * - 1 = Wait for tag switch to complete + * operation to complete. + * - 0 = Don't wait + * - 1 = Wait for tag switch to complete * @size: The size of the operation: - * - CVMX_FAU_OP_SIZE_8 (0) = 8 bits - * - CVMX_FAU_OP_SIZE_16 (1) = 16 bits - * - CVMX_FAU_OP_SIZE_32 (2) = 32 bits - * - CVMX_FAU_OP_SIZE_64 (3) = 64 bits + * - CVMX_FAU_OP_SIZE_8 (0) = 8 bits + * - CVMX_FAU_OP_SIZE_16 (1) = 16 bits + * - CVMX_FAU_OP_SIZE_32 (2) = 32 bits + * - CVMX_FAU_OP_SIZE_64 (3) = 64 bits * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 2 for 16 bit access. - * - Step by 4 for 32 bit access. - * - Step by 8 for 64 bit access. + * - Step by 2 for 16 bit access. + * - Step by 4 for 32 bit access. + * - Step by 8 for 64 bit access. * Returns Data to write using cvmx_send_single */ static inline uint64_t __cvmx_fau_iobdma_data(uint64_t scraddr, int64_t value, @@ -337,11 +337,11 @@ static inline uint64_t __cvmx_fau_iobdma_data(uint64_t scraddr, int64_t value, * placed in the scratch memory at byte address scraddr. * * @scraddr: Scratch memory byte address to put response in. - * Must be 8 byte aligned. + * Must be 8 byte aligned. * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 8 for 64 bit access. + * - Step by 8 for 64 bit access. * @value: Signed value to add. - * Note: Only the low 22 bits are available. + * Note: Only the low 22 bits are available. * Returns Placed in the scratch pad register */ static inline void cvmx_fau_async_fetch_and_add64(uint64_t scraddr, @@ -357,11 +357,11 @@ static inline void cvmx_fau_async_fetch_and_add64(uint64_t scraddr, * placed in the scratch memory at byte address scraddr. * * @scraddr: Scratch memory byte address to put response in. - * Must be 8 byte aligned. + * Must be 8 byte aligned. * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 4 for 32 bit access. + * - Step by 4 for 32 bit access. * @value: Signed value to add. - * Note: Only the low 22 bits are available. + * Note: Only the low 22 bits are available. * Returns Placed in the scratch pad register */ static inline void cvmx_fau_async_fetch_and_add32(uint64_t scraddr, @@ -377,9 +377,9 @@ static inline void cvmx_fau_async_fetch_and_add32(uint64_t scraddr, * placed in the scratch memory at byte address scraddr. * * @scraddr: Scratch memory byte address to put response in. - * Must be 8 byte aligned. + * Must be 8 byte aligned. * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 2 for 16 bit access. + * - Step by 2 for 16 bit access. * @value: Signed value to add. * Returns Placed in the scratch pad register */ @@ -396,7 +396,7 @@ static inline void cvmx_fau_async_fetch_and_add16(uint64_t scraddr, * placed in the scratch memory at byte address scraddr. * * @scraddr: Scratch memory byte address to put response in. - * Must be 8 byte aligned. + * Must be 8 byte aligned. * @reg: FAU atomic register to access. 0 <= reg < 2048. * @value: Signed value to add. * Returns Placed in the scratch pad register @@ -414,14 +414,14 @@ static inline void cvmx_fau_async_fetch_and_add8(uint64_t scraddr, * switch completes. * * @scraddr: Scratch memory byte address to put response in. Must be - * 8 byte aligned. If a timeout occurs, the error bit (63) - * will be set. Otherwise the value of the register before - * the update will be returned + * 8 byte aligned. If a timeout occurs, the error bit (63) + * will be set. Otherwise the value of the register before + * the update will be returned * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 8 for 64 bit access. + * - Step by 8 for 64 bit access. * @value: Signed value to add. - * Note: Only the low 22 bits are available. + * Note: Only the low 22 bits are available. * Returns Placed in the scratch pad register */ static inline void cvmx_fau_async_tagwait_fetch_and_add64(uint64_t scraddr, @@ -437,14 +437,14 @@ static inline void cvmx_fau_async_tagwait_fetch_and_add64(uint64_t scraddr, * switch completes. * * @scraddr: Scratch memory byte address to put response in. Must be - * 8 byte aligned. If a timeout occurs, the error bit (63) - * will be set. Otherwise the value of the register before - * the update will be returned + * 8 byte aligned. If a timeout occurs, the error bit (63) + * will be set. Otherwise the value of the register before + * the update will be returned * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 4 for 32 bit access. + * - Step by 4 for 32 bit access. * @value: Signed value to add. - * Note: Only the low 22 bits are available. + * Note: Only the low 22 bits are available. * Returns Placed in the scratch pad register */ static inline void cvmx_fau_async_tagwait_fetch_and_add32(uint64_t scraddr, @@ -460,12 +460,12 @@ static inline void cvmx_fau_async_tagwait_fetch_and_add32(uint64_t scraddr, * switch completes. * * @scraddr: Scratch memory byte address to put response in. Must be - * 8 byte aligned. If a timeout occurs, the error bit (63) - * will be set. Otherwise the value of the register before - * the update will be returned + * 8 byte aligned. If a timeout occurs, the error bit (63) + * will be set. Otherwise the value of the register before + * the update will be returned * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 2 for 16 bit access. + * - Step by 2 for 16 bit access. * @value: Signed value to add. * * Returns Placed in the scratch pad register @@ -483,9 +483,9 @@ static inline void cvmx_fau_async_tagwait_fetch_and_add16(uint64_t scraddr, * switch completes. * * @scraddr: Scratch memory byte address to put response in. Must be - * 8 byte aligned. If a timeout occurs, the error bit (63) - * will be set. Otherwise the value of the register before - * the update will be returned + * 8 byte aligned. If a timeout occurs, the error bit (63) + * will be set. Otherwise the value of the register before + * the update will be returned * * @reg: FAU atomic register to access. 0 <= reg < 2048. * @value: Signed value to add. @@ -504,7 +504,7 @@ static inline void cvmx_fau_async_tagwait_fetch_and_add8(uint64_t scraddr, * Perform an atomic 64 bit add * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 8 for 64 bit access. + * - Step by 8 for 64 bit access. * @value: Signed value to add. */ static inline void cvmx_fau_atomic_add64(cvmx_fau_reg_64_t reg, int64_t value) @@ -516,7 +516,7 @@ static inline void cvmx_fau_atomic_add64(cvmx_fau_reg_64_t reg, int64_t value) * Perform an atomic 32 bit add * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 4 for 32 bit access. + * - Step by 4 for 32 bit access. * @value: Signed value to add. */ static inline void cvmx_fau_atomic_add32(cvmx_fau_reg_32_t reg, int32_t value) @@ -528,7 +528,7 @@ static inline void cvmx_fau_atomic_add32(cvmx_fau_reg_32_t reg, int32_t value) * Perform an atomic 16 bit add * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 2 for 16 bit access. + * - Step by 2 for 16 bit access. * @value: Signed value to add. */ static inline void cvmx_fau_atomic_add16(cvmx_fau_reg_16_t reg, int16_t value) @@ -551,7 +551,7 @@ static inline void cvmx_fau_atomic_add8(cvmx_fau_reg_8_t reg, int8_t value) * Perform an atomic 64 bit write * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 8 for 64 bit access. + * - Step by 8 for 64 bit access. * @value: Signed value to write. */ static inline void cvmx_fau_atomic_write64(cvmx_fau_reg_64_t reg, int64_t value) @@ -563,7 +563,7 @@ static inline void cvmx_fau_atomic_write64(cvmx_fau_reg_64_t reg, int64_t value) * Perform an atomic 32 bit write * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 4 for 32 bit access. + * - Step by 4 for 32 bit access. * @value: Signed value to write. */ static inline void cvmx_fau_atomic_write32(cvmx_fau_reg_32_t reg, int32_t value) @@ -575,7 +575,7 @@ static inline void cvmx_fau_atomic_write32(cvmx_fau_reg_32_t reg, int32_t value) * Perform an atomic 16 bit write * * @reg: FAU atomic register to access. 0 <= reg < 2048. - * - Step by 2 for 16 bit access. + * - Step by 2 for 16 bit access. * @value: Signed value to write. */ static inline void cvmx_fau_atomic_write16(cvmx_fau_reg_16_t reg, int16_t value) diff --git a/arch/mips/include/asm/octeon/cvmx-fpa.h b/arch/mips/include/asm/octeon/cvmx-fpa.h index 541a1ae..aa26a2c 100644 --- a/arch/mips/include/asm/octeon/cvmx-fpa.h +++ b/arch/mips/include/asm/octeon/cvmx-fpa.h @@ -39,9 +39,9 @@ #include <asm/octeon/cvmx-address.h> #include <asm/octeon/cvmx-fpa-defs.h> -#define CVMX_FPA_NUM_POOLS 8 +#define CVMX_FPA_NUM_POOLS 8 #define CVMX_FPA_MIN_BLOCK_SIZE 128 -#define CVMX_FPA_ALIGNMENT 128 +#define CVMX_FPA_ALIGNMENT 128 /** * Structure describing the data format used for stores to the FPA. @@ -186,8 +186,8 @@ static inline void *cvmx_fpa_alloc(uint64_t pool) /** * Asynchronously get a new block from the FPA * - * @scr_addr: Local scratch address to put response in. This is a byte address, - * but must be 8 byte aligned. + * @scr_addr: Local scratch address to put response in. This is a byte address, + * but must be 8 byte aligned. * @pool: Pool to get the block from */ static inline void cvmx_fpa_async_alloc(uint64_t scr_addr, uint64_t pool) @@ -212,7 +212,7 @@ static inline void cvmx_fpa_async_alloc(uint64_t scr_addr, uint64_t pool) * @ptr: Block to free * @pool: Pool to put it in * @num_cache_lines: - * Cache lines to invalidate + * Cache lines to invalidate */ static inline void cvmx_fpa_free_nosync(void *ptr, uint64_t pool, uint64_t num_cache_lines) @@ -234,7 +234,7 @@ static inline void cvmx_fpa_free_nosync(void *ptr, uint64_t pool, * @ptr: Block to free * @pool: Pool to put it in * @num_cache_lines: - * Cache lines to invalidate + * Cache lines to invalidate */ static inline void cvmx_fpa_free(void *ptr, uint64_t pool, uint64_t num_cache_lines) @@ -245,7 +245,7 @@ static inline void cvmx_fpa_free(void *ptr, uint64_t pool, CVMX_ADDR_DIDSPACE(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool)); /* * Make sure that any previous writes to memory go out before - * we free this buffer. This also serves as a barrier to + * we free this buffer. This also serves as a barrier to * prevent GCC from reordering operations to after the * free. */ @@ -259,17 +259,17 @@ static inline void cvmx_fpa_free(void *ptr, uint64_t pool, * This can only be called once per pool. Make sure proper * locking enforces this. * - * @pool: Pool to initialize - * 0 <= pool < 8 - * @name: Constant character string to name this pool. - * String is not copied. - * @buffer: Pointer to the block of memory to use. This must be - * accessible by all processors and external hardware. + * @pool: Pool to initialize + * 0 <= pool < 8 + * @name: Constant character string to name this pool. + * String is not copied. + * @buffer: Pointer to the block of memory to use. This must be + * accessible by all processors and external hardware. * @block_size: Size for each block controlled by the FPA * @num_blocks: Number of blocks * * Returns 0 on Success, - * -1 on failure + * -1 on failure */ extern int cvmx_fpa_setup_pool(uint64_t pool, const char *name, void *buffer, uint64_t block_size, uint64_t num_blocks); @@ -282,8 +282,8 @@ extern int cvmx_fpa_setup_pool(uint64_t pool, const char *name, void *buffer, * * @pool: Pool to shutdown * Returns Zero on success - * - Positive is count of missing buffers - * - Negative is too many buffers or corrupted pointers + * - Positive is count of missing buffers + * - Negative is too many buffers or corrupted pointers */ extern uint64_t cvmx_fpa_shutdown_pool(uint64_t pool); diff --git a/arch/mips/include/asm/octeon/cvmx-helper-board.h b/arch/mips/include/asm/octeon/cvmx-helper-board.h index 442f508..41785dd 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-board.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-board.h @@ -48,7 +48,7 @@ typedef enum { * Fake IPD port, the RGMII/MII interface may use different PHY, use * this macro to return appropriate MIX address to read the PHY. */ -#define CVMX_HELPER_BOARD_MGMT_IPD_PORT -10 +#define CVMX_HELPER_BOARD_MGMT_IPD_PORT -10 /** * cvmx_override_board_link_get(int ipd_port) is a function @@ -86,10 +86,10 @@ extern int cvmx_helper_board_get_mii_address(int ipd_port); * * @phy_addr: The address of the PHY to program * @link_flags: - * Flags to control autonegotiation. Bit 0 is autonegotiation - * enable/disable to maintain backware compatibility. + * Flags to control autonegotiation. Bit 0 is autonegotiation + * enable/disable to maintain backware compatibility. * @link_info: Link speed to program. If the speed is zero and autonegotiation - * is enabled, all possible negotiation speeds are advertised. + * is enabled, all possible negotiation speeds are advertised. * * Returns Zero on success, negative on failure */ @@ -111,10 +111,10 @@ int cvmx_helper_board_link_set_phy(int phy_addr, * enumeration from the bootloader. * * @ipd_port: IPD input port associated with the port we want to get link - * status for. + * status for. * * Returns The ports link status. If the link isn't fully resolved, this must - * return zero. + * return zero. */ extern cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port); @@ -134,10 +134,10 @@ extern cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port); * * @interface: Interface to probe * @supported_ports: - * Number of ports Octeon supports. + * Number of ports Octeon supports. * * Returns Number of ports the actual board supports. Many times this will - * simple be "support_ports". + * simple be "support_ports". */ extern int __cvmx_helper_board_interface_probe(int interface, int supported_ports); diff --git a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h b/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h index 78295ba..4d7a3db 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h @@ -98,9 +98,9 @@ extern int __cvmx_helper_rgmii_link_set(int ipd_port, * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h b/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h index 9a9b6c1..4debb1c 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h @@ -92,9 +92,9 @@ extern int __cvmx_helper_sgmii_link_set(int ipd_port, * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/include/asm/octeon/cvmx-helper-util.h b/arch/mips/include/asm/octeon/cvmx-helper-util.h index 01c8ddd..f446f21 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-util.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-util.h @@ -57,11 +57,11 @@ extern int cvmx_helper_dump_packet(cvmx_wqe_t *work); * * @queue: Input queue to setup RED on (0-7) * @pass_thresh: - * Packets will begin slowly dropping when there are less than - * this many packet buffers free in FPA 0. + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. * @drop_thresh: - * All incoming packets will be dropped when there are less - * than this many free packet buffers in FPA 0. + * All incoming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ extern int cvmx_helper_setup_red_queue(int queue, int pass_thresh, @@ -71,11 +71,11 @@ extern int cvmx_helper_setup_red_queue(int queue, int pass_thresh, * Setup Random Early Drop to automatically begin dropping packets. * * @pass_thresh: - * Packets will begin slowly dropping when there are less than - * this many packet buffers free in FPA 0. + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. * @drop_thresh: - * All incoming packets will be dropped when there are less - * than this many free packet buffers in FPA 0. + * All incoming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ extern int cvmx_helper_setup_red(int pass_thresh, int drop_thresh); @@ -84,7 +84,7 @@ extern int cvmx_helper_setup_red(int pass_thresh, int drop_thresh); * Get the version of the CVMX libraries. * * Returns Version string. Note this buffer is allocated statically - * and will be shared by all callers. + * and will be shared by all callers. */ extern const char *cvmx_helper_get_version(void); diff --git a/arch/mips/include/asm/octeon/cvmx-helper-xaui.h b/arch/mips/include/asm/octeon/cvmx-helper-xaui.h index f6fbc4f..5e89ed7 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-xaui.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-xaui.h @@ -92,9 +92,9 @@ extern int __cvmx_helper_xaui_link_set(int ipd_port, * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/include/asm/octeon/cvmx-helper.h b/arch/mips/include/asm/octeon/cvmx-helper.h index 691c814..5a3090d 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper.h +++ b/arch/mips/include/asm/octeon/cvmx-helper.h @@ -93,12 +93,12 @@ extern void (*cvmx_override_ipd_port_setup) (int ipd_port); /** * This function enables the IPD and also enables the packet interfaces. * The packet interfaces (RGMII and SPI) must be enabled after the - * IPD. This should be called by the user program after any additional + * IPD. This should be called by the user program after any additional * IPD configuration changes are made if CVMX_HELPER_ENABLE_IPD * is not set in the executive-config.h file. * * Returns 0 on success - * -1 on failure + * -1 on failure */ extern int cvmx_helper_ipd_and_packet_input_enable(void); @@ -128,7 +128,7 @@ extern int cvmx_helper_initialize_packet_io_local(void); * @interface: Which interface to return port count for. * * Returns Port count for interface - * -1 for uninitialized interface + * -1 for uninitialized interface */ extern int cvmx_helper_ports_on_interface(int interface); @@ -150,7 +150,7 @@ extern int cvmx_helper_get_number_of_interfaces(void); * @interface: Interface to probe * * Returns Mode of the interface. Unknown or unsupported interfaces return - * DISABLED. + * DISABLED. */ extern cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface); @@ -214,9 +214,9 @@ extern int cvmx_helper_interface_enumerate(int interface); * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/include/asm/octeon/cvmx-ipd.h b/arch/mips/include/asm/octeon/cvmx-ipd.h index 115a552..e13490e 100644 --- a/arch/mips/include/asm/octeon/cvmx-ipd.h +++ b/arch/mips/include/asm/octeon/cvmx-ipd.h @@ -38,8 +38,8 @@ #include <asm/octeon/cvmx-ipd-defs.h> enum cvmx_ipd_mode { - CVMX_IPD_OPC_MODE_STT = 0LL, /* All blocks DRAM, not cached in L2 */ - CVMX_IPD_OPC_MODE_STF = 1LL, /* All bloccks into L2 */ + CVMX_IPD_OPC_MODE_STT = 0LL, /* All blocks DRAM, not cached in L2 */ + CVMX_IPD_OPC_MODE_STF = 1LL, /* All bloccks into L2 */ CVMX_IPD_OPC_MODE_STF1_STT = 2LL, /* 1st block L2, rest DRAM */ CVMX_IPD_OPC_MODE_STF2_STT = 3LL /* 1st, 2nd blocks L2, rest DRAM */ }; @@ -60,17 +60,17 @@ typedef cvmx_ipd_first_next_ptr_back_t cvmx_ipd_second_next_ptr_back_t; * * @mbuff_size: Packets buffer size in 8 byte words * @first_mbuff_skip: - * Number of 8 byte words to skip in the first buffer + * Number of 8 byte words to skip in the first buffer * @not_first_mbuff_skip: - * Number of 8 byte words to skip in each following buffer + * Number of 8 byte words to skip in each following buffer * @first_back: Must be same as first_mbuff_skip / 128 * @second_back: - * Must be same as not_first_mbuff_skip / 128 + * Must be same as not_first_mbuff_skip / 128 * @wqe_fpa_pool: - * FPA pool to get work entries from + * FPA pool to get work entries from * @cache_mode: * @back_pres_enable_flag: - * Enable or disable port back pressure + * Enable or disable port back pressure */ static inline void cvmx_ipd_config(uint64_t mbuff_size, uint64_t first_mbuff_skip, diff --git a/arch/mips/include/asm/octeon/cvmx-l2c.h b/arch/mips/include/asm/octeon/cvmx-l2c.h index 2c8ff9e..11c0a8f 100644 --- a/arch/mips/include/asm/octeon/cvmx-l2c.h +++ b/arch/mips/include/asm/octeon/cvmx-l2c.h @@ -33,13 +33,13 @@ #ifndef __CVMX_L2C_H__ #define __CVMX_L2C_H__ -#define CVMX_L2_ASSOC cvmx_l2c_get_num_assoc() /* Deprecated macro, use function */ +#define CVMX_L2_ASSOC cvmx_l2c_get_num_assoc() /* Deprecated macro, use function */ #define CVMX_L2_SET_BITS cvmx_l2c_get_set_bits() /* Deprecated macro, use function */ -#define CVMX_L2_SETS cvmx_l2c_get_num_sets() /* Deprecated macro, use function */ +#define CVMX_L2_SETS cvmx_l2c_get_num_sets() /* Deprecated macro, use function */ #define CVMX_L2C_IDX_ADDR_SHIFT 7 /* based on 128 byte cache line size */ -#define CVMX_L2C_IDX_MASK (cvmx_l2c_get_num_sets() - 1) +#define CVMX_L2C_IDX_MASK (cvmx_l2c_get_num_sets() - 1) /* Defines for index aliasing computations */ #define CVMX_L2C_TAG_ADDR_ALIAS_SHIFT (CVMX_L2C_IDX_ADDR_SHIFT + cvmx_l2c_get_set_bits()) @@ -67,91 +67,91 @@ union cvmx_l2c_tag { /* L2C Performance Counter events. */ enum cvmx_l2c_event { - CVMX_L2C_EVENT_CYCLES = 0, + CVMX_L2C_EVENT_CYCLES = 0, CVMX_L2C_EVENT_INSTRUCTION_MISS = 1, - CVMX_L2C_EVENT_INSTRUCTION_HIT = 2, - CVMX_L2C_EVENT_DATA_MISS = 3, - CVMX_L2C_EVENT_DATA_HIT = 4, - CVMX_L2C_EVENT_MISS = 5, - CVMX_L2C_EVENT_HIT = 6, - CVMX_L2C_EVENT_VICTIM_HIT = 7, - CVMX_L2C_EVENT_INDEX_CONFLICT = 8, - CVMX_L2C_EVENT_TAG_PROBE = 9, - CVMX_L2C_EVENT_TAG_UPDATE = 10, - CVMX_L2C_EVENT_TAG_COMPLETE = 11, - CVMX_L2C_EVENT_TAG_DIRTY = 12, - CVMX_L2C_EVENT_DATA_STORE_NOP = 13, - CVMX_L2C_EVENT_DATA_STORE_READ = 14, + CVMX_L2C_EVENT_INSTRUCTION_HIT = 2, + CVMX_L2C_EVENT_DATA_MISS = 3, + CVMX_L2C_EVENT_DATA_HIT = 4, + CVMX_L2C_EVENT_MISS = 5, + CVMX_L2C_EVENT_HIT = 6, + CVMX_L2C_EVENT_VICTIM_HIT = 7, + CVMX_L2C_EVENT_INDEX_CONFLICT = 8, + CVMX_L2C_EVENT_TAG_PROBE = 9, + CVMX_L2C_EVENT_TAG_UPDATE = 10, + CVMX_L2C_EVENT_TAG_COMPLETE = 11, + CVMX_L2C_EVENT_TAG_DIRTY = 12, + CVMX_L2C_EVENT_DATA_STORE_NOP = 13, + CVMX_L2C_EVENT_DATA_STORE_READ = 14, CVMX_L2C_EVENT_DATA_STORE_WRITE = 15, - CVMX_L2C_EVENT_FILL_DATA_VALID = 16, - CVMX_L2C_EVENT_WRITE_REQUEST = 17, - CVMX_L2C_EVENT_READ_REQUEST = 18, + CVMX_L2C_EVENT_FILL_DATA_VALID = 16, + CVMX_L2C_EVENT_WRITE_REQUEST = 17, + CVMX_L2C_EVENT_READ_REQUEST = 18, CVMX_L2C_EVENT_WRITE_DATA_VALID = 19, - CVMX_L2C_EVENT_XMC_NOP = 20, - CVMX_L2C_EVENT_XMC_LDT = 21, - CVMX_L2C_EVENT_XMC_LDI = 22, - CVMX_L2C_EVENT_XMC_LDD = 23, - CVMX_L2C_EVENT_XMC_STF = 24, - CVMX_L2C_EVENT_XMC_STT = 25, - CVMX_L2C_EVENT_XMC_STP = 26, - CVMX_L2C_EVENT_XMC_STC = 27, - CVMX_L2C_EVENT_XMC_DWB = 28, - CVMX_L2C_EVENT_XMC_PL2 = 29, - CVMX_L2C_EVENT_XMC_PSL1 = 30, - CVMX_L2C_EVENT_XMC_IOBLD = 31, - CVMX_L2C_EVENT_XMC_IOBST = 32, - CVMX_L2C_EVENT_XMC_IOBDMA = 33, - CVMX_L2C_EVENT_XMC_IOBRSP = 34, - CVMX_L2C_EVENT_XMC_BUS_VALID = 35, - CVMX_L2C_EVENT_XMC_MEM_DATA = 36, - CVMX_L2C_EVENT_XMC_REFL_DATA = 37, - CVMX_L2C_EVENT_XMC_IOBRSP_DATA = 38, - CVMX_L2C_EVENT_RSC_NOP = 39, - CVMX_L2C_EVENT_RSC_STDN = 40, - CVMX_L2C_EVENT_RSC_FILL = 41, - CVMX_L2C_EVENT_RSC_REFL = 42, - CVMX_L2C_EVENT_RSC_STIN = 43, - CVMX_L2C_EVENT_RSC_SCIN = 44, - CVMX_L2C_EVENT_RSC_SCFL = 45, - CVMX_L2C_EVENT_RSC_SCDN = 46, - CVMX_L2C_EVENT_RSC_DATA_VALID = 47, - CVMX_L2C_EVENT_RSC_VALID_FILL = 48, - CVMX_L2C_EVENT_RSC_VALID_STRSP = 49, - CVMX_L2C_EVENT_RSC_VALID_REFL = 50, - CVMX_L2C_EVENT_LRF_REQ = 51, - CVMX_L2C_EVENT_DT_RD_ALLOC = 52, - CVMX_L2C_EVENT_DT_WR_INVAL = 53, + CVMX_L2C_EVENT_XMC_NOP = 20, + CVMX_L2C_EVENT_XMC_LDT = 21, + CVMX_L2C_EVENT_XMC_LDI = 22, + CVMX_L2C_EVENT_XMC_LDD = 23, + CVMX_L2C_EVENT_XMC_STF = 24, + CVMX_L2C_EVENT_XMC_STT = 25, + CVMX_L2C_EVENT_XMC_STP = 26, + CVMX_L2C_EVENT_XMC_STC = 27, + CVMX_L2C_EVENT_XMC_DWB = 28, + CVMX_L2C_EVENT_XMC_PL2 = 29, + CVMX_L2C_EVENT_XMC_PSL1 = 30, + CVMX_L2C_EVENT_XMC_IOBLD = 31, + CVMX_L2C_EVENT_XMC_IOBST = 32, + CVMX_L2C_EVENT_XMC_IOBDMA = 33, + CVMX_L2C_EVENT_XMC_IOBRSP = 34, + CVMX_L2C_EVENT_XMC_BUS_VALID = 35, + CVMX_L2C_EVENT_XMC_MEM_DATA = 36, + CVMX_L2C_EVENT_XMC_REFL_DATA = 37, + CVMX_L2C_EVENT_XMC_IOBRSP_DATA = 38, + CVMX_L2C_EVENT_RSC_NOP = 39, + CVMX_L2C_EVENT_RSC_STDN = 40, + CVMX_L2C_EVENT_RSC_FILL = 41, + CVMX_L2C_EVENT_RSC_REFL = 42, + CVMX_L2C_EVENT_RSC_STIN = 43, + CVMX_L2C_EVENT_RSC_SCIN = 44, + CVMX_L2C_EVENT_RSC_SCFL = 45, + CVMX_L2C_EVENT_RSC_SCDN = 46, + CVMX_L2C_EVENT_RSC_DATA_VALID = 47, + CVMX_L2C_EVENT_RSC_VALID_FILL = 48, + CVMX_L2C_EVENT_RSC_VALID_STRSP = 49, + CVMX_L2C_EVENT_RSC_VALID_REFL = 50, + CVMX_L2C_EVENT_LRF_REQ = 51, + CVMX_L2C_EVENT_DT_RD_ALLOC = 52, + CVMX_L2C_EVENT_DT_WR_INVAL = 53, CVMX_L2C_EVENT_MAX }; /* L2C Performance Counter events for Octeon2. */ enum cvmx_l2c_tad_event { - CVMX_L2C_TAD_EVENT_NONE = 0, - CVMX_L2C_TAD_EVENT_TAG_HIT = 1, - CVMX_L2C_TAD_EVENT_TAG_MISS = 2, - CVMX_L2C_TAD_EVENT_TAG_NOALLOC = 3, - CVMX_L2C_TAD_EVENT_TAG_VICTIM = 4, - CVMX_L2C_TAD_EVENT_SC_FAIL = 5, - CVMX_L2C_TAD_EVENT_SC_PASS = 6, - CVMX_L2C_TAD_EVENT_LFB_VALID = 7, - CVMX_L2C_TAD_EVENT_LFB_WAIT_LFB = 8, - CVMX_L2C_TAD_EVENT_LFB_WAIT_VAB = 9, - CVMX_L2C_TAD_EVENT_QUAD0_INDEX = 128, - CVMX_L2C_TAD_EVENT_QUAD0_READ = 129, - CVMX_L2C_TAD_EVENT_QUAD0_BANK = 130, - CVMX_L2C_TAD_EVENT_QUAD0_WDAT = 131, - CVMX_L2C_TAD_EVENT_QUAD1_INDEX = 144, - CVMX_L2C_TAD_EVENT_QUAD1_READ = 145, - CVMX_L2C_TAD_EVENT_QUAD1_BANK = 146, - CVMX_L2C_TAD_EVENT_QUAD1_WDAT = 147, - CVMX_L2C_TAD_EVENT_QUAD2_INDEX = 160, - CVMX_L2C_TAD_EVENT_QUAD2_READ = 161, - CVMX_L2C_TAD_EVENT_QUAD2_BANK = 162, - CVMX_L2C_TAD_EVENT_QUAD2_WDAT = 163, - CVMX_L2C_TAD_EVENT_QUAD3_INDEX = 176, - CVMX_L2C_TAD_EVENT_QUAD3_READ = 177, - CVMX_L2C_TAD_EVENT_QUAD3_BANK = 178, - CVMX_L2C_TAD_EVENT_QUAD3_WDAT = 179, + CVMX_L2C_TAD_EVENT_NONE = 0, + CVMX_L2C_TAD_EVENT_TAG_HIT = 1, + CVMX_L2C_TAD_EVENT_TAG_MISS = 2, + CVMX_L2C_TAD_EVENT_TAG_NOALLOC = 3, + CVMX_L2C_TAD_EVENT_TAG_VICTIM = 4, + CVMX_L2C_TAD_EVENT_SC_FAIL = 5, + CVMX_L2C_TAD_EVENT_SC_PASS = 6, + CVMX_L2C_TAD_EVENT_LFB_VALID = 7, + CVMX_L2C_TAD_EVENT_LFB_WAIT_LFB = 8, + CVMX_L2C_TAD_EVENT_LFB_WAIT_VAB = 9, + CVMX_L2C_TAD_EVENT_QUAD0_INDEX = 128, + CVMX_L2C_TAD_EVENT_QUAD0_READ = 129, + CVMX_L2C_TAD_EVENT_QUAD0_BANK = 130, + CVMX_L2C_TAD_EVENT_QUAD0_WDAT = 131, + CVMX_L2C_TAD_EVENT_QUAD1_INDEX = 144, + CVMX_L2C_TAD_EVENT_QUAD1_READ = 145, + CVMX_L2C_TAD_EVENT_QUAD1_BANK = 146, + CVMX_L2C_TAD_EVENT_QUAD1_WDAT = 147, + CVMX_L2C_TAD_EVENT_QUAD2_INDEX = 160, + CVMX_L2C_TAD_EVENT_QUAD2_READ = 161, + CVMX_L2C_TAD_EVENT_QUAD2_BANK = 162, + CVMX_L2C_TAD_EVENT_QUAD2_WDAT = 163, + CVMX_L2C_TAD_EVENT_QUAD3_INDEX = 176, + CVMX_L2C_TAD_EVENT_QUAD3_READ = 177, + CVMX_L2C_TAD_EVENT_QUAD3_BANK = 178, + CVMX_L2C_TAD_EVENT_QUAD3_WDAT = 179, CVMX_L2C_TAD_EVENT_MAX }; @@ -159,10 +159,10 @@ enum cvmx_l2c_tad_event { * Configure one of the four L2 Cache performance counters to capture event * occurrences. * - * @counter: The counter to configure. Range 0..3. - * @event: The type of L2 Cache event occurrence to count. + * @counter: The counter to configure. Range 0..3. + * @event: The type of L2 Cache event occurrence to count. * @clear_on_read: When asserted, any read of the performance counter - * clears the counter. + * clears the counter. * * @note The routine does not clear the counter. */ @@ -184,8 +184,8 @@ uint64_t cvmx_l2c_read_perf(uint32_t counter); * @core: The core processor of interest. * * Returns The mask specifying the partitioning. 0 bits in mask indicates - * the cache 'ways' that a core can evict from. - * -1 on error + * the cache 'ways' that a core can evict from. + * -1 on error */ int cvmx_l2c_get_core_way_partition(uint32_t core); @@ -194,16 +194,16 @@ int cvmx_l2c_get_core_way_partition(uint32_t core); * * @core: The core that the partitioning applies to. * @mask: The partitioning of the ways expressed as a binary - * mask. A 0 bit allows the core to evict cache lines from - * a way, while a 1 bit blocks the core from evicting any - * lines from that way. There must be at least one allowed - * way (0 bit) in the mask. + * mask. A 0 bit allows the core to evict cache lines from + * a way, while a 1 bit blocks the core from evicting any + * lines from that way. There must be at least one allowed + * way (0 bit) in the mask. * * @note If any ways are blocked for all cores and the HW blocks, then - * those ways will never have any cache lines evicted from them. - * All cores and the hardware blocks are free to read from all - * ways regardless of the partitioning. + * those ways will never have any cache lines evicted from them. + * All cores and the hardware blocks are free to read from all + * ways regardless of the partitioning. */ int cvmx_l2c_set_core_way_partition(uint32_t core, uint32_t mask); @@ -211,8 +211,8 @@ int cvmx_l2c_set_core_way_partition(uint32_t core, uint32_t mask); * Return the L2 Cache way partitioning for the hw blocks. * * Returns The mask specifying the reserved way. 0 bits in mask indicates - * the cache 'ways' that a core can evict from. - * -1 on error + * the cache 'ways' that a core can evict from. + * -1 on error */ int cvmx_l2c_get_hw_way_partition(void); @@ -220,16 +220,16 @@ int cvmx_l2c_get_hw_way_partition(void); * Partitions the L2 cache for the hardware blocks. * * @mask: The partitioning of the ways expressed as a binary - * mask. A 0 bit allows the core to evict cache lines from - * a way, while a 1 bit blocks the core from evicting any - * lines from that way. There must be at least one allowed - * way (0 bit) in the mask. + * mask. A 0 bit allows the core to evict cache lines from + * a way, while a 1 bit blocks the core from evicting any + * lines from that way. There must be at least one allowed + * way (0 bit) in the mask. * * @note If any ways are blocked for all cores and the HW blocks, then - * those ways will never have any cache lines evicted from them. - * All cores and the hardware blocks are free to read from all - * ways regardless of the partitioning. + * those ways will never have any cache lines evicted from them. + * All cores and the hardware blocks are free to read from all + * ways regardless of the partitioning. */ int cvmx_l2c_set_hw_way_partition(uint32_t mask); @@ -240,7 +240,7 @@ int cvmx_l2c_set_hw_way_partition(uint32_t mask); * @addr: physical address of line to lock * * Returns 0 on success, - * 1 if line not locked. + * 1 if line not locked. */ int cvmx_l2c_lock_line(uint64_t addr); @@ -258,7 +258,7 @@ int cvmx_l2c_lock_line(uint64_t addr); * @len: Length (in bytes) of region to lock * * Returns Number of requested lines that where not locked. - * 0 on success (all locked) + * 0 on success (all locked) */ int cvmx_l2c_lock_mem_region(uint64_t start, uint64_t len); @@ -272,7 +272,7 @@ int cvmx_l2c_lock_mem_region(uint64_t start, uint64_t len); * @address: Physical address to unlock * * Returns 0: line not unlocked - * 1: line unlocked + * 1: line unlocked */ int cvmx_l2c_unlock_line(uint64_t address); @@ -290,7 +290,7 @@ int cvmx_l2c_unlock_mem_region(uint64_t start, uint64_t len); * Read the L2 controller tag for a given location in L2 * * @association: - * Which association to read line from + * Which association to read line from * @index: Which way to read from. * * Returns l2c tag structure for line requested. diff --git a/arch/mips/include/asm/octeon/cvmx-mdio.h b/arch/mips/include/asm/octeon/cvmx-mdio.h index 6f0cd18..9f6a4f3 100644 --- a/arch/mips/include/asm/octeon/cvmx-mdio.h +++ b/arch/mips/include/asm/octeon/cvmx-mdio.h @@ -246,21 +246,21 @@ typedef union { } cvmx_mdio_phy_reg_mmd_address_data_t; /* Operating request encodings. */ -#define MDIO_CLAUSE_22_WRITE 0 -#define MDIO_CLAUSE_22_READ 1 +#define MDIO_CLAUSE_22_WRITE 0 +#define MDIO_CLAUSE_22_READ 1 -#define MDIO_CLAUSE_45_ADDRESS 0 -#define MDIO_CLAUSE_45_WRITE 1 +#define MDIO_CLAUSE_45_ADDRESS 0 +#define MDIO_CLAUSE_45_WRITE 1 #define MDIO_CLAUSE_45_READ_INC 2 -#define MDIO_CLAUSE_45_READ 3 +#define MDIO_CLAUSE_45_READ 3 /* MMD identifiers, mostly for accessing devices within XENPAK modules. */ -#define CVMX_MMD_DEVICE_PMA_PMD 1 -#define CVMX_MMD_DEVICE_WIS 2 -#define CVMX_MMD_DEVICE_PCS 3 -#define CVMX_MMD_DEVICE_PHY_XS 4 -#define CVMX_MMD_DEVICE_DTS_XS 5 -#define CVMX_MMD_DEVICE_TC 6 +#define CVMX_MMD_DEVICE_PMA_PMD 1 +#define CVMX_MMD_DEVICE_WIS 2 +#define CVMX_MMD_DEVICE_PCS 3 +#define CVMX_MMD_DEVICE_PHY_XS 4 +#define CVMX_MMD_DEVICE_DTS_XS 5 +#define CVMX_MMD_DEVICE_TC 6 #define CVMX_MMD_DEVICE_CL22_EXT 29 #define CVMX_MMD_DEVICE_VENDOR_1 30 #define CVMX_MMD_DEVICE_VENDOR_2 31 @@ -291,7 +291,7 @@ static inline void __cvmx_mdio_set_clause22_mode(int bus_id) * registers controlling auto negotiation. * * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) - * support multiple busses. + * support multiple busses. * @phy_id: The MII phy id * @location: Register location to read * @@ -328,13 +328,13 @@ static inline int cvmx_mdio_read(int bus_id, int phy_id, int location) * registers controlling auto negotiation. * * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) - * support multiple busses. + * support multiple busses. * @phy_id: The MII phy id * @location: Register location to write * @val: Value to write * * Returns -1 on error - * 0 on success + * 0 on success */ static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val) { @@ -370,7 +370,7 @@ static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val) * read PHY registers controlling auto negotiation. * * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) - * support multiple busses. + * support multiple busses. * @phy_id: The MII phy id * @device: MDIO Managable Device (MMD) id * @location: Register location to read @@ -407,7 +407,7 @@ static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device, } while (smi_wr.s.pending && --timeout); if (timeout <= 0) { cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d " - "device %2d register %2d TIME OUT(address)\n", + "device %2d register %2d TIME OUT(address)\n", bus_id, phy_id, device, location); return -1; } @@ -425,7 +425,7 @@ static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device, if (timeout <= 0) { cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d " - "device %2d register %2d TIME OUT(data)\n", + "device %2d register %2d TIME OUT(data)\n", bus_id, phy_id, device, location); return -1; } @@ -434,7 +434,7 @@ static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device, return smi_rd.s.dat; else { cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d " - "device %2d register %2d INVALID READ\n", + "device %2d register %2d INVALID READ\n", bus_id, phy_id, device, location); return -1; } @@ -445,14 +445,14 @@ static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device, * write PHY registers controlling auto negotiation. * * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) - * support multiple busses. + * support multiple busses. * @phy_id: The MII phy id * @device: MDIO Managable Device (MMD) id * @location: Register location to write * @val: Value to write * * Returns -1 on error - * 0 on success + * 0 on success */ static inline int cvmx_mdio_45_write(int bus_id, int phy_id, int device, int location, int val) diff --git a/arch/mips/include/asm/octeon/cvmx-pip-defs.h b/arch/mips/include/asm/octeon/cvmx-pip-defs.h index 05a917d..e975c7d 100644 --- a/arch/mips/include/asm/octeon/cvmx-pip-defs.h +++ b/arch/mips/include/asm/octeon/cvmx-pip-defs.h @@ -44,7 +44,7 @@ enum cvmx_pip_port_parse_mode { */ CVMX_PIP_PORT_CFG_MODE_SKIPL2 = 1ull, /* - * Input packets are assumed to be IP. Results from non IP + * Input packets are assumed to be IP. Results from non IP * packets is undefined. Pointers reference the beginning of * the IP header. */ diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h index 9e739a6..a76fe5a 100644 --- a/arch/mips/include/asm/octeon/cvmx-pip.h +++ b/arch/mips/include/asm/octeon/cvmx-pip.h @@ -37,8 +37,8 @@ #include <asm/octeon/cvmx-fpa.h> #include <asm/octeon/cvmx-pip-defs.h> -#define CVMX_PIP_NUM_INPUT_PORTS 40 -#define CVMX_PIP_NUM_WATCHERS 4 +#define CVMX_PIP_NUM_INPUT_PORTS 40 +#define CVMX_PIP_NUM_WATCHERS 4 /* * Encodes the different error and exception codes @@ -92,10 +92,10 @@ typedef enum { /** * NOTES - * late collision (data received before collision) - * late collisions cannot be detected by the receiver - * they would appear as JAM bits which would appear as bad FCS - * or carrier extend error which is CVMX_PIP_EXTEND_ERR + * late collision (data received before collision) + * late collisions cannot be detected by the receiver + * they would appear as JAM bits which would appear as bad FCS + * or carrier extend error which is CVMX_PIP_EXTEND_ERR */ typedef enum { /* No error */ @@ -122,11 +122,11 @@ typedef enum { * error) */ CVMX_PIP_UNDER_FCS_ERR = 6ull, - /* RGM 7 = FCS error */ + /* RGM 7 = FCS error */ CVMX_PIP_GMX_FCS_ERR = 7ull, /* RGM+SPI 8 = min frame error (pkt len < min frame len) */ CVMX_PIP_UNDER_ERR = 8ull, - /* RGM 9 = Frame carrier extend error */ + /* RGM 9 = Frame carrier extend error */ CVMX_PIP_EXTEND_ERR = 9ull, /* * RGM 10 = length mismatch (len did not match len in L2 @@ -161,10 +161,10 @@ typedef enum { CVMX_PIP_PIP_L2_MAL_HDR = 18L /* * NOTES: xx = late collision (data received before collision) - * late collisions cannot be detected by the receiver - * they would appear as JAM bits which would appear as - * bad FCS or carrier extend error which is - * CVMX_PIP_EXTEND_ERR + * late collisions cannot be detected by the receiver + * they would appear as JAM bits which would appear as + * bad FCS or carrier extend error which is + * CVMX_PIP_EXTEND_ERR */ } cvmx_pip_rcv_err_t; @@ -192,13 +192,13 @@ typedef struct { /* Number of packets processed by PIP */ uint32_t packets; /* - * Number of indentified L2 multicast packets. Does not + * Number of indentified L2 multicast packets. Does not * include broadcast packets. Only includes packets whose * parse mode is SKIP_TO_L2 */ uint32_t multicast_packets; /* - * Number of indentified L2 broadcast packets. Does not + * Number of indentified L2 broadcast packets. Does not * include multicast packets. Only includes packets whose * parse mode is SKIP_TO_L2 */ @@ -287,7 +287,7 @@ typedef union { * @port_num: Port number to configure * @port_cfg: Port hardware configuration * @port_tag_cfg: - * Port POW tagging configuration + * Port POW tagging configuration */ static inline void cvmx_pip_config_port(uint64_t port_num, union cvmx_pip_prt_cfgx port_cfg, @@ -298,20 +298,20 @@ static inline void cvmx_pip_config_port(uint64_t port_num, } #if 0 /** - * @deprecated This function is a thin wrapper around the Pass1 version - * of the CVMX_PIP_QOS_WATCHX CSR; Pass2 has added a field for - * setting the group that is incompatible with this function, - * the preferred upgrade path is to use the CSR directly. + * @deprecated This function is a thin wrapper around the Pass1 version + * of the CVMX_PIP_QOS_WATCHX CSR; Pass2 has added a field for + * setting the group that is incompatible with this function, + * the preferred upgrade path is to use the CSR directly. * * Configure the global QoS packet watchers. Each watcher is * capable of matching a field in a packet to determine the * QoS queue for scheduling. * - * @watcher: Watcher number to configure (0 - 3). + * @watcher: Watcher number to configure (0 - 3). * @match_type: Watcher match type * @match_value: - * Value the watcher will match against - * @qos: QoS queue for packets matching this watcher + * Value the watcher will match against + * @qos: QoS queue for packets matching this watcher */ static inline void cvmx_pip_config_watcher(uint64_t watcher, cvmx_pip_qos_watch_types match_type, @@ -331,7 +331,7 @@ static inline void cvmx_pip_config_watcher(uint64_t watcher, * Configure the VLAN priority to QoS queue mapping. * * @vlan_priority: - * VLAN priority (0-7) + * VLAN priority (0-7) * @qos: QoS queue for packets matching this watcher */ static inline void cvmx_pip_config_vlan_qos(uint64_t vlan_priority, @@ -451,10 +451,10 @@ static inline void cvmx_pip_get_port_status(uint64_t port_num, uint64_t clear, * * @interface: Interface to configure (0 or 1) * @invert_result: - * Invert the result of the CRC + * Invert the result of the CRC * @reflect: Reflect * @initialization_vector: - * CRC initialization vector + * CRC initialization vector */ static inline void cvmx_pip_config_crc(uint64_t interface, uint64_t invert_result, uint64_t reflect, @@ -500,13 +500,13 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index) * * @mask_index: Which tag mask to modify (0..3) * @offset: Offset into the bitmask to set bits at. Use the GCC macro - * offsetof() to determine the offsets into packet headers. - * For example, offsetof(ethhdr, protocol) returns the offset - * of the ethernet protocol field. The bitmask selects which - * bytes to include the the tag, with bit offset X selecting - * byte at offset X from the beginning of the packet data. + * offsetof() to determine the offsets into packet headers. + * For example, offsetof(ethhdr, protocol) returns the offset + * of the ethernet protocol field. The bitmask selects which + * bytes to include the the tag, with bit offset X selecting + * byte at offset X from the beginning of the packet data. * @len: Number of bytes to include. Usually this is the sizeof() - * the field. + * the field. */ static inline void cvmx_pip_tag_mask_set(uint64_t mask_index, uint64_t offset, uint64_t len) diff --git a/arch/mips/include/asm/octeon/cvmx-pko.h b/arch/mips/include/asm/octeon/cvmx-pko.h index c6daeed..f7d2a67 100644 --- a/arch/mips/include/asm/octeon/cvmx-pko.h +++ b/arch/mips/include/asm/octeon/cvmx-pko.h @@ -69,16 +69,16 @@ #define CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST (1) #define CVMX_PKO_MAX_OUTPUT_QUEUES_STATIC 256 -#define CVMX_PKO_MAX_OUTPUT_QUEUES ((OCTEON_IS_MODEL(OCTEON_CN31XX) || \ +#define CVMX_PKO_MAX_OUTPUT_QUEUES ((OCTEON_IS_MODEL(OCTEON_CN31XX) || \ OCTEON_IS_MODEL(OCTEON_CN3010) || OCTEON_IS_MODEL(OCTEON_CN3005) || \ OCTEON_IS_MODEL(OCTEON_CN50XX)) ? 32 : \ (OCTEON_IS_MODEL(OCTEON_CN58XX) || \ OCTEON_IS_MODEL(OCTEON_CN56XX)) ? 256 : 128) -#define CVMX_PKO_NUM_OUTPUT_PORTS 40 +#define CVMX_PKO_NUM_OUTPUT_PORTS 40 /* use this for queues that are not used */ #define CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID 63 -#define CVMX_PKO_QUEUE_STATIC_PRIORITY 9 -#define CVMX_PKO_ILLEGAL_QUEUE 0xFFFF +#define CVMX_PKO_QUEUE_STATIC_PRIORITY 9 +#define CVMX_PKO_ILLEGAL_QUEUE 0xFFFF #define CVMX_PKO_MAX_QUEUE_DEPTH 0 typedef enum { @@ -269,13 +269,13 @@ extern void cvmx_pko_shutdown(void); /** * Configure a output port and the associated queues for use. * - * @port: Port to configure. + * @port: Port to configure. * @base_queue: First queue number to associate with this port. * @num_queues: Number of queues t oassociate with this port - * @priority: Array of priority levels for each queue. Values are - * allowed to be 1-8. A value of 8 get 8 times the traffic - * of a value of 1. There must be num_queues elements in the - * array. + * @priority: Array of priority levels for each queue. Values are + * allowed to be 1-8. A value of 8 get 8 times the traffic + * of a value of 1. There must be num_queues elements in the + * array. */ extern cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, @@ -285,7 +285,7 @@ extern cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, /** * Ring the packet output doorbell. This tells the packet * output hardware that "len" command words have been added - * to its pending list. This command includes the required + * to its pending list. This command includes the required * CVMX_SYNCWS before the doorbell ring. * * @port: Port the packet is for @@ -322,18 +322,18 @@ static inline void cvmx_pko_doorbell(uint64_t port, uint64_t queue, * The use_locking parameter allows the caller to use three * possible locking modes. * - CVMX_PKO_LOCK_NONE - * - PKO doesn't do any locking. It is the responsibility - * of the application to make sure that no other core - * is accessing the same queue at the same time. + * - PKO doesn't do any locking. It is the responsibility + * of the application to make sure that no other core + * is accessing the same queue at the same time. * - CVMX_PKO_LOCK_ATOMIC_TAG - * - PKO performs an atomic tagswitch to insure exclusive - * access to the output queue. This will maintain - * packet ordering on output. + * - PKO performs an atomic tagswitch to insure exclusive + * access to the output queue. This will maintain + * packet ordering on output. * - CVMX_PKO_LOCK_CMD_QUEUE - * - PKO uses the common command queue locks to insure - * exclusive access to the output queue. This is a - * memory based ll/sc. This is the most portable - * locking mechanism. + * - PKO uses the common command queue locks to insure + * exclusive access to the output queue. This is a + * memory based ll/sc. This is the most portable + * locking mechanism. * * NOTE: If atomic locking is used, the POW entry CANNOT be * descheduled, as it does not contain a valid WQE pointer. @@ -341,7 +341,7 @@ static inline void cvmx_pko_doorbell(uint64_t port, uint64_t queue, * @port: Port to send it on * @queue: Queue to use * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or - * CVMX_PKO_LOCK_CMD_QUEUE + * CVMX_PKO_LOCK_CMD_QUEUE */ static inline void cvmx_pko_send_packet_prepare(uint64_t port, uint64_t queue, @@ -351,11 +351,11 @@ static inline void cvmx_pko_send_packet_prepare(uint64_t port, uint64_t queue, /* * Must do a full switch here to handle all cases. We * use a fake WQE pointer, as the POW does not access - * this memory. The WQE pointer and group are only + * this memory. The WQE pointer and group are only * used if this work is descheduled, which is not * supported by the * cvmx_pko_send_packet_prepare/cvmx_pko_send_packet_finish - * combination. Note that this is a special case in + * combination. Note that this is a special case in * which these fake values can be used - this is not a * general technique. */ @@ -377,10 +377,10 @@ static inline void cvmx_pko_send_packet_prepare(uint64_t port, uint64_t queue, * @port: Port to send it on * @queue: Queue to use * @pko_command: - * PKO HW command word + * PKO HW command word * @packet: Packet to send * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or - * CVMX_PKO_LOCK_CMD_QUEUE + * CVMX_PKO_LOCK_CMD_QUEUE * * Returns returns CVMX_PKO_SUCCESS on success, or error code on * failure of output @@ -418,12 +418,12 @@ static inline cvmx_pko_status_t cvmx_pko_send_packet_finish( * @port: Port to send it on * @queue: Queue to use * @pko_command: - * PKO HW command word + * PKO HW command word * @packet: Packet to send * @addr: Plysical address of a work queue entry or physical address - * to zero on complete. + * to zero on complete. * @use_locking: CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or - * CVMX_PKO_LOCK_CMD_QUEUE + * CVMX_PKO_LOCK_CMD_QUEUE * * Returns returns CVMX_PKO_SUCCESS on success, or error code on * failure of output @@ -588,7 +588,7 @@ static inline void cvmx_pko_get_port_status(uint64_t port_num, uint64_t clear, * @port: Port to rate limit * @packets_s: Maximum packet/sec * @burst: Maximum number of packets to burst in a row before rate - * limiting cuts in. + * limiting cuts in. * * Returns Zero on success, negative on failure */ @@ -601,7 +601,7 @@ extern int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst); * @port: Port to rate limit * @bits_s: PKO rate limit in bits/sec * @burst: Maximum number of bits to burst before rate - * limiting cuts in. + * limiting cuts in. * * Returns Zero on success, negative on failure */ diff --git a/arch/mips/include/asm/octeon/cvmx-pow.h b/arch/mips/include/asm/octeon/cvmx-pow.h index 92742b2..4b4d0ec 100644 --- a/arch/mips/include/asm/octeon/cvmx-pow.h +++ b/arch/mips/include/asm/octeon/cvmx-pow.h @@ -70,7 +70,7 @@ enum cvmx_pow_tag_type { * The work queue entry from the order - NEVER tag switch from * NULL to NULL */ - CVMX_POW_TAG_TYPE_NULL = 2L, + CVMX_POW_TAG_TYPE_NULL = 2L, /* A tag switch to NULL, and there is no space reserved in POW * - NEVER tag switch to NULL_NULL * - NEVER tag switch from NULL_NULL @@ -90,7 +90,7 @@ typedef enum { } cvmx_pow_wait_t; /** - * POW tag operations. These are used in the data stored to the POW. + * POW tag operations. These are used in the data stored to the POW. */ typedef enum { /* @@ -341,14 +341,14 @@ typedef union { * lists. The two memory-input queue lists associated * with each QOS level are: * - * - qosgrp = 0, qosgrp = 8: QOS0 - * - qosgrp = 1, qosgrp = 9: QOS1 - * - qosgrp = 2, qosgrp = 10: QOS2 - * - qosgrp = 3, qosgrp = 11: QOS3 - * - qosgrp = 4, qosgrp = 12: QOS4 - * - qosgrp = 5, qosgrp = 13: QOS5 - * - qosgrp = 6, qosgrp = 14: QOS6 - * - qosgrp = 7, qosgrp = 15: QOS7 + * - qosgrp = 0, qosgrp = 8: QOS0 + * - qosgrp = 1, qosgrp = 9: QOS1 + * - qosgrp = 2, qosgrp = 10: QOS2 + * - qosgrp = 3, qosgrp = 11: QOS3 + * - qosgrp = 4, qosgrp = 12: QOS4 + * - qosgrp = 5, qosgrp = 13: QOS5 + * - qosgrp = 6, qosgrp = 14: QOS6 + * - qosgrp = 7, qosgrp = 15: QOS7 */ uint64_t qosgrp:4; /* @@ -942,11 +942,11 @@ typedef union { * operations. * * NOTE: The following is the behavior of the pending switch bit at the PP - * for POW stores (i.e. when did<7:3> == 0xc) - * - did<2:0> == 0 => pending switch bit is set - * - did<2:0> == 1 => no affect on the pending switch bit - * - did<2:0> == 3 => pending switch bit is cleared - * - did<2:0> == 7 => no affect on the pending switch bit + * for POW stores (i.e. when did<7:3> == 0xc) + * - did<2:0> == 0 => pending switch bit is set + * - did<2:0> == 1 => no affect on the pending switch bit + * - did<2:0> == 3 => pending switch bit is cleared + * - did<2:0> == 7 => no affect on the pending switch bit * - did<2:0> == others => must not be used * - No other loads/stores have an affect on the pending switch bit * - The switch bus from POW can clear the pending switch bit @@ -1053,7 +1053,7 @@ static inline cvmx_wqe_t *cvmx_pow_get_current_wqp(void) } #ifndef CVMX_MF_CHORD -#define CVMX_MF_CHORD(dest) CVMX_RDHWR(dest, 30) +#define CVMX_MF_CHORD(dest) CVMX_RDHWR(dest, 30) #endif /** @@ -1097,7 +1097,7 @@ static inline void cvmx_pow_tag_sw_wait(void) * so the caller must ensure that there is not a pending tag switch. * * @wait: When set, call stalls until work becomes avaiable, or times out. - * If not set, returns immediately. + * If not set, returns immediately. * * Returns Returns the WQE pointer from POW. Returns NULL if no work * was available. @@ -1131,7 +1131,7 @@ static inline cvmx_wqe_t *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_t * requesting the new work. * * @wait: When set, call stalls until work becomes avaiable, or times out. - * If not set, returns immediately. + * If not set, returns immediately. * * Returns Returns the WQE pointer from POW. Returns NULL if no work * was available. @@ -1148,7 +1148,7 @@ static inline cvmx_wqe_t *cvmx_pow_work_request_sync(cvmx_pow_wait_t wait) } /** - * Synchronous null_rd request. Requests a switch out of NULL_NULL POW state. + * Synchronous null_rd request. Requests a switch out of NULL_NULL POW state. * This function waits for any previous tag switch to complete before * requesting the null_rd. * @@ -1183,11 +1183,11 @@ static inline enum cvmx_pow_tag_type cvmx_pow_work_request_null_rd(void) * there is not a pending tag switch. * * @scr_addr: Scratch memory address that response will be returned - * to, which is either a valid WQE, or a response with the - * invalid bit set. Byte address, must be 8 byte aligned. + * to, which is either a valid WQE, or a response with the + * invalid bit set. Byte address, must be 8 byte aligned. * * @wait: 1 to cause response to wait for work to become available (or - * timeout), 0 to cause response to return immediately + * timeout), 0 to cause response to return immediately */ static inline void cvmx_pow_work_request_async_nocheck(int scr_addr, cvmx_pow_wait_t wait) @@ -1212,11 +1212,11 @@ static inline void cvmx_pow_work_request_async_nocheck(int scr_addr, * tag switch to complete before requesting the new work. * * @scr_addr: Scratch memory address that response will be returned - * to, which is either a valid WQE, or a response with the - * invalid bit set. Byte address, must be 8 byte aligned. + * to, which is either a valid WQE, or a response with the + * invalid bit set. Byte address, must be 8 byte aligned. * * @wait: 1 to cause response to wait for work to become available (or - * timeout), 0 to cause response to return immediately + * timeout), 0 to cause response to return immediately */ static inline void cvmx_pow_work_request_async(int scr_addr, cvmx_pow_wait_t wait) @@ -1234,7 +1234,7 @@ static inline void cvmx_pow_work_request_async(int scr_addr, * to wait for the response. * * @scr_addr: Scratch memory address to get result from Byte address, - * must be 8 byte aligned. + * must be 8 byte aligned. * * Returns Returns the WQE from the scratch register, or NULL if no * work was available. @@ -1260,7 +1260,7 @@ static inline cvmx_wqe_t *cvmx_pow_work_response_async(int scr_addr) * @wqe_ptr: pointer to a work queue entry returned by the POW * * Returns 0 if pointer is valid - * 1 if invalid (no work was returned) + * 1 if invalid (no work was returned) */ static inline uint64_t cvmx_pow_work_invalid(cvmx_wqe_t *wqe_ptr) { @@ -1314,7 +1314,7 @@ static inline void cvmx_pow_tag_sw_nocheck(uint32_t tag, /* * Note that WQE in DRAM is not updated here, as the POW does * not read from DRAM once the WQE is in flight. See hardware - * manual for complete details. It is the application's + * manual for complete details. It is the application's * responsibility to keep track of the current tag value if * that is important. */ @@ -1361,7 +1361,7 @@ static inline void cvmx_pow_tag_sw(uint32_t tag, /* * Note that WQE in DRAM is not updated here, as the POW does * not read from DRAM once the WQE is in flight. See hardware - * manual for complete details. It is the application's + * manual for complete details. It is the application's * responsibility to keep track of the current tag value if * that is important. */ @@ -1390,7 +1390,7 @@ static inline void cvmx_pow_tag_sw(uint32_t tag, * previous tag switch has completed. * * @wqp: pointer to work queue entry to submit. This entry is - * updated to match the other parameters + * updated to match the other parameters * @tag: tag value to be assigned to work queue entry * @tag_type: type of tag * @group: group value for the work queue entry. @@ -1429,7 +1429,7 @@ static inline void cvmx_pow_tag_sw_full_nocheck(cvmx_wqe_t *wqp, uint32_t tag, /* * Note that WQE in DRAM is not updated here, as the POW does * not read from DRAM once the WQE is in flight. See hardware - * manual for complete details. It is the application's + * manual for complete details. It is the application's * responsibility to keep track of the current tag value if * that is important. */ @@ -1468,10 +1468,10 @@ static inline void cvmx_pow_tag_sw_full_nocheck(cvmx_wqe_t *wqp, uint32_t tag, * before requesting the tag switch. * * @wqp: pointer to work queue entry to submit. This entry is updated - * to match the other parameters + * to match the other parameters * @tag: tag value to be assigned to work queue entry * @tag_type: type of tag - * @group: group value for the work queue entry. + * @group: group value for the work queue entry. */ static inline void cvmx_pow_tag_sw_full(cvmx_wqe_t *wqp, uint32_t tag, enum cvmx_pow_tag_type tag_type, @@ -1560,7 +1560,7 @@ static inline void cvmx_pow_tag_sw_null(void) * unrelated to the tag that the core currently holds. * * @wqp: pointer to work queue entry to submit. This entry is - * updated to match the other parameters + * updated to match the other parameters * @tag: tag value to be assigned to work queue entry * @tag_type: type of tag * @qos: Input queue to add to. @@ -1592,7 +1592,7 @@ static inline void cvmx_pow_work_submit(cvmx_wqe_t *wqp, uint32_t tag, ptr.sio.offset = cvmx_ptr_to_phys(wqp); /* - * SYNC write to memory before the work submit. This is + * SYNC write to memory before the work submit. This is * necessary as POW may read values from DRAM at this time. */ CVMX_SYNCWS; @@ -1604,11 +1604,11 @@ static inline void cvmx_pow_work_submit(cvmx_wqe_t *wqp, uint32_t tag, * indicates which groups each core will accept work from. There are * 16 groups. * - * @core_num: core to apply mask to + * @core_num: core to apply mask to * @mask: Group mask. There are 16 groups, so only bits 0-15 are valid, - * representing groups 0-15. - * Each 1 bit in the mask enables the core to accept work from - * the corresponding group. + * representing groups 0-15. + * Each 1 bit in the mask enables the core to accept work from + * the corresponding group. */ static inline void cvmx_pow_set_group_mask(uint64_t core_num, uint64_t mask) { @@ -1623,14 +1623,14 @@ static inline void cvmx_pow_set_group_mask(uint64_t core_num, uint64_t mask) * This function sets POW static priorities for a core. Each input queue has * an associated priority value. * - * @core_num: core to apply priorities to - * @priority: Vector of 8 priorities, one per POW Input Queue (0-7). - * Highest priority is 0 and lowest is 7. A priority value - * of 0xF instructs POW to skip the Input Queue when - * scheduling to this specific core. - * NOTE: priorities should not have gaps in values, meaning - * {0,1,1,1,1,1,1,1} is a valid configuration while - * {0,2,2,2,2,2,2,2} is not. + * @core_num: core to apply priorities to + * @priority: Vector of 8 priorities, one per POW Input Queue (0-7). + * Highest priority is 0 and lowest is 7. A priority value + * of 0xF instructs POW to skip the Input Queue when + * scheduling to this specific core. + * NOTE: priorities should not have gaps in values, meaning + * {0,1,1,1,1,1,1,1} is a valid configuration while + * {0,2,2,2,2,2,2,2} is not. */ static inline void cvmx_pow_set_priority(uint64_t core_num, const uint8_t priority[]) @@ -1708,8 +1708,8 @@ static inline void cvmx_pow_set_priority(uint64_t core_num, * @tag_type: New tag type * @group: New group value * @no_sched: Control whether this work queue entry will be rescheduled. - * - 1 : don't schedule this work - * - 0 : allow this work to be scheduled. + * - 1 : don't schedule this work + * - 0 : allow this work to be scheduled. */ static inline void cvmx_pow_tag_sw_desched_nocheck( uint32_t tag, @@ -1794,8 +1794,8 @@ static inline void cvmx_pow_tag_sw_desched_nocheck( * @tag_type: New tag type * @group: New group value * @no_sched: Control whether this work queue entry will be rescheduled. - * - 1 : don't schedule this work - * - 0 : allow this work to be scheduled. + * - 1 : don't schedule this work + * - 0 : allow this work to be scheduled. */ static inline void cvmx_pow_tag_sw_desched(uint32_t tag, enum cvmx_pow_tag_type tag_type, @@ -1819,8 +1819,8 @@ static inline void cvmx_pow_tag_sw_desched(uint32_t tag, * Descchedules the current work queue entry. * * @no_sched: no schedule flag value to be set on the work queue - * entry. If this is set the entry will not be - * rescheduled. + * entry. If this is set the entry will not be + * rescheduled. */ static inline void cvmx_pow_desched(uint64_t no_sched) { @@ -1863,7 +1863,7 @@ static inline void cvmx_pow_desched(uint64_t no_sched) *****************************************************/ /* - * Number of bits of the tag used by software. The SW bits are always + * Number of bits of the tag used by software. The SW bits are always * a contiguous block of the high starting at bit 31. The hardware * bits are always the low bits. By default, the top 8 bits of the * tag are reserved for software, and the low 24 are set by the IPD @@ -1890,7 +1890,7 @@ static inline void cvmx_pow_desched(uint64_t no_sched) * are defined here. */ /* Mask for the value portion of the tag */ -#define CVMX_TAG_SUBGROUP_MASK 0xFFFF +#define CVMX_TAG_SUBGROUP_MASK 0xFFFF #define CVMX_TAG_SUBGROUP_SHIFT 16 #define CVMX_TAG_SUBGROUP_PKO 0x1 @@ -1905,12 +1905,12 @@ static inline void cvmx_pow_desched(uint64_t no_sched) * This function creates a 32 bit tag value from the two values provided. * * @sw_bits: The upper bits (number depends on configuration) are set - * to this value. The remainder of bits are set by the - * hw_bits parameter. + * to this value. The remainder of bits are set by the + * hw_bits parameter. * * @hw_bits: The lower bits (number depends on configuration) are set - * to this value. The remainder of bits are set by the - * sw_bits parameter. + * to this value. The remainder of bits are set by the + * sw_bits parameter. * * Returns 32 bit value of the combined hw and sw bits. */ @@ -1957,7 +1957,7 @@ static inline uint32_t cvmx_pow_tag_get_hw_bits(uint64_t tag) * * @buffer: Buffer to store capture into * @buffer_size: - * The size of the supplied buffer + * The size of the supplied buffer * * Returns Zero on success, negative on failure */ @@ -1968,7 +1968,7 @@ extern int cvmx_pow_capture(void *buffer, int buffer_size); * * @buffer: POW capture from cvmx_pow_capture() * @buffer_size: - * Size of the buffer + * Size of the buffer */ extern void cvmx_pow_display(void *buffer, int buffer_size); diff --git a/arch/mips/include/asm/octeon/cvmx-scratch.h b/arch/mips/include/asm/octeon/cvmx-scratch.h index 96b70cf..8d21cc5 100644 --- a/arch/mips/include/asm/octeon/cvmx-scratch.h +++ b/arch/mips/include/asm/octeon/cvmx-scratch.h @@ -39,7 +39,7 @@ * Note: This define must be a long, not a long long in order to * compile without warnings for both 32bit and 64bit. */ -#define CVMX_SCRATCH_BASE (-32768l) /* 0xffffffffffff8000 */ +#define CVMX_SCRATCH_BASE (-32768l) /* 0xffffffffffff8000 */ /** * Reads an 8 bit value from the processor local scratchpad memory. diff --git a/arch/mips/include/asm/octeon/cvmx-spi.h b/arch/mips/include/asm/octeon/cvmx-spi.h index 3bf53b5..d5038cc 100644 --- a/arch/mips/include/asm/octeon/cvmx-spi.h +++ b/arch/mips/include/asm/octeon/cvmx-spi.h @@ -84,11 +84,11 @@ static inline int cvmx_spi_is_spi_interface(int interface) * Initialize and start the SPI interface. * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * @num_ports: Number of SPI ports to configure * @@ -102,11 +102,11 @@ extern int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, * with its corespondant system. * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * Returns Zero on success, negative of failure. */ @@ -154,7 +154,7 @@ static inline union cvmx_gmxx_rxx_rx_inbnd cvmx_spi4000_check_speed( /** * Get current SPI4 initialization callbacks * - * @callbacks: Pointer to the callbacks structure.to fill + * @callbacks: Pointer to the callbacks structure.to fill * * Returns Pointer to cvmx_spi_callbacks_t structure. */ @@ -171,11 +171,11 @@ extern void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks); * Callback to perform SPI4 reset * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * * Returns Zero on success, non-zero error code on failure (will cause * SPI initialization to abort) @@ -187,11 +187,11 @@ extern int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode); * detection * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @num_ports: Number of ports to configure on SPI * * Returns Zero on success, non-zero error code on failure (will cause @@ -204,11 +204,11 @@ extern int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, * Callback to perform clock detection * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * * Returns Zero on success, non-zero error code on failure (will cause @@ -221,11 +221,11 @@ extern int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, * Callback to perform link training * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for link to be trained (in seconds) * * Returns Zero on success, non-zero error code on failure (will cause @@ -238,11 +238,11 @@ extern int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, * Callback to perform calendar data synchronization * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for calendar data in seconds * * Returns Zero on success, non-zero error code on failure (will cause @@ -255,11 +255,11 @@ extern int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, * Callback to handle interface up * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * * Returns Zero on success, non-zero error code on failure (will cause * SPI initialization to abort) diff --git a/arch/mips/include/asm/octeon/cvmx-spinlock.h b/arch/mips/include/asm/octeon/cvmx-spinlock.h index a672abb..4f09cff 100644 --- a/arch/mips/include/asm/octeon/cvmx-spinlock.h +++ b/arch/mips/include/asm/octeon/cvmx-spinlock.h @@ -26,7 +26,7 @@ ***********************license end**************************************/ /** - * Implementation of spinlocks for Octeon CVMX. Although similar in + * Implementation of spinlocks for Octeon CVMX. Although similar in * function to Linux kernel spinlocks, they are not compatible. * Octeon CVMX spinlocks are only used to synchronize with the boot * monitor and other non-Linux programs running in the system. @@ -50,8 +50,8 @@ typedef struct { } cvmx_spinlock_t; /* note - macros not expanded in inline ASM, so values hardcoded */ -#define CVMX_SPINLOCK_UNLOCKED_VAL 0 -#define CVMX_SPINLOCK_LOCKED_VAL 1 +#define CVMX_SPINLOCK_UNLOCKED_VAL 0 +#define CVMX_SPINLOCK_LOCKED_VAL 1 #define CVMX_SPINLOCK_UNLOCKED_INITIALIZER {CVMX_SPINLOCK_UNLOCKED_VAL} @@ -96,7 +96,7 @@ static inline void cvmx_spinlock_unlock(cvmx_spinlock_t *lock) * @lock: pointer to lock structure * * Returns 0: lock successfully taken - * 1: lock not taken, held by someone else + * 1: lock not taken, held by someone else * These return values match the Linux semantics. */ @@ -104,16 +104,16 @@ static inline unsigned int cvmx_spinlock_trylock(cvmx_spinlock_t *lock) { unsigned int tmp; - __asm__ __volatile__(".set noreorder \n" + __asm__ __volatile__(".set noreorder \n" "1: ll %[tmp], %[val] \n" /* if lock held, fail immediately */ - " bnez %[tmp], 2f \n" - " li %[tmp], 1 \n" - " sc %[tmp], %[val] \n" - " beqz %[tmp], 1b \n" - " li %[tmp], 0 \n" - "2: \n" - ".set reorder \n" : + " bnez %[tmp], 2f \n" + " li %[tmp], 1 \n" + " sc %[tmp], %[val] \n" + " beqz %[tmp], 1b \n" + " li %[tmp], 0 \n" + "2: \n" + ".set reorder \n" : [val] "+m"(lock->value), [tmp] "=&r"(tmp) : : "memory"); @@ -129,14 +129,14 @@ static inline void cvmx_spinlock_lock(cvmx_spinlock_t *lock) { unsigned int tmp; - __asm__ __volatile__(".set noreorder \n" + __asm__ __volatile__(".set noreorder \n" "1: ll %[tmp], %[val] \n" - " bnez %[tmp], 1b \n" - " li %[tmp], 1 \n" - " sc %[tmp], %[val] \n" - " beqz %[tmp], 1b \n" - " nop \n" - ".set reorder \n" : + " bnez %[tmp], 1b \n" + " li %[tmp], 1 \n" + " sc %[tmp], %[val] \n" + " beqz %[tmp], 1b \n" + " nop \n" + ".set reorder \n" : [val] "+m"(lock->value), [tmp] "=&r"(tmp) : : "memory"); @@ -163,17 +163,17 @@ static inline void cvmx_spinlock_bit_lock(uint32_t *word) unsigned int tmp; unsigned int sav; - __asm__ __volatile__(".set noreorder \n" - ".set noat \n" + __asm__ __volatile__(".set noreorder \n" + ".set noat \n" "1: ll %[tmp], %[val] \n" - " bbit1 %[tmp], 31, 1b \n" - " li $at, 1 \n" - " ins %[tmp], $at, 31, 1 \n" - " sc %[tmp], %[val] \n" - " beqz %[tmp], 1b \n" - " nop \n" - ".set at \n" - ".set reorder \n" : + " bbit1 %[tmp], 31, 1b \n" + " li $at, 1 \n" + " ins %[tmp], $at, 31, 1 \n" + " sc %[tmp], %[val] \n" + " beqz %[tmp], 1b \n" + " nop \n" + ".set at \n" + ".set reorder \n" : [val] "+m"(*word), [tmp] "=&r"(tmp), [sav] "=&r"(sav) : : "memory"); @@ -187,7 +187,7 @@ static inline void cvmx_spinlock_bit_lock(uint32_t *word) * * @word: word to lock bit 31 of * Returns 0: lock successfully taken - * 1: lock not taken, held by someone else + * 1: lock not taken, held by someone else * These return values match the Linux semantics. */ static inline unsigned int cvmx_spinlock_bit_trylock(uint32_t *word) @@ -198,15 +198,15 @@ static inline unsigned int cvmx_spinlock_bit_trylock(uint32_t *word) ".set noat\n" "1: ll %[tmp], %[val] \n" /* if lock held, fail immediately */ - " bbit1 %[tmp], 31, 2f \n" - " li $at, 1 \n" - " ins %[tmp], $at, 31, 1 \n" - " sc %[tmp], %[val] \n" - " beqz %[tmp], 1b \n" - " li %[tmp], 0 \n" - "2: \n" - ".set at \n" - ".set reorder \n" : + " bbit1 %[tmp], 31, 2f \n" + " li $at, 1 \n" + " ins %[tmp], $at, 31, 1 \n" + " sc %[tmp], %[val] \n" + " beqz %[tmp], 1b \n" + " li %[tmp], 0 \n" + "2: \n" + ".set at \n" + ".set reorder \n" : [val] "+m"(*word), [tmp] "=&r"(tmp) : : "memory"); diff --git a/arch/mips/include/asm/octeon/cvmx-sysinfo.h b/arch/mips/include/asm/octeon/cvmx-sysinfo.h index 61dd574..2131197 100644 --- a/arch/mips/include/asm/octeon/cvmx-sysinfo.h +++ b/arch/mips/include/asm/octeon/cvmx-sysinfo.h @@ -85,7 +85,7 @@ struct cvmx_sysinfo { char board_serial_number[OCTEON_SERIAL_LEN]; /* * Several boards support compact flash on the Octeon boot - * bus. The CF memory spaces may be mapped to different + * bus. The CF memory spaces may be mapped to different * addresses on different boards. These values will be 0 if * CF is not present. Note that these addresses are physical * addresses, and it is up to the application to use the @@ -123,25 +123,25 @@ extern struct cvmx_sysinfo *cvmx_sysinfo_get(void); /** * This function is used in non-simple executive environments (such as - * Linux kernel, u-boot, etc.) to configure the minimal fields that + * Linux kernel, u-boot, etc.) to configure the minimal fields that * are required to use simple executive files directly. * * Locking (if required) must be handled outside of this * function * * @phy_mem_desc_ptr: Pointer to global physical memory descriptor - * (bootmem descriptor) @board_type: Octeon board - * type enumeration + * (bootmem descriptor) @board_type: Octeon board + * type enumeration * * @board_rev_major: - * Board major revision + * Board major revision * @board_rev_minor: - * Board minor revision + * Board minor revision * @cpu_clock_hz: - * CPU clock freqency in hertz + * CPU clock freqency in hertz * * Returns 0: Failure - * 1: success + * 1: success */ extern int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr, uint16_t board_type, diff --git a/arch/mips/include/asm/octeon/cvmx-wqe.h b/arch/mips/include/asm/octeon/cvmx-wqe.h index df76238..aa0d3d0 100644 --- a/arch/mips/include/asm/octeon/cvmx-wqe.h +++ b/arch/mips/include/asm/octeon/cvmx-wqe.h @@ -101,23 +101,23 @@ typedef union { * - 1 = Malformed L4 * - 2 = L4 Checksum Error: the L4 checksum value is * - 3 = UDP Length Error: The UDP length field would - * make the UDP data longer than what remains in - * the IP packet (as defined by the IP header - * length field). + * make the UDP data longer than what remains in + * the IP packet (as defined by the IP header + * length field). * - 4 = Bad L4 Port: either the source or destination - * TCP/UDP port is 0. + * TCP/UDP port is 0. * - 8 = TCP FIN Only: the packet is TCP and only the - * FIN flag set. + * FIN flag set. * - 9 = TCP No Flags: the packet is TCP and no flags - * are set. + * are set. * - 10 = TCP FIN RST: the packet is TCP and both FIN - * and RST are set. + * and RST are set. * - 11 = TCP SYN URG: the packet is TCP and both SYN - * and URG are set. + * and URG are set. * - 12 = TCP SYN RST: the packet is TCP and both SYN - * and RST are set. + * and RST are set. * - 13 = TCP SYN FIN: the packet is TCP and both SYN - * and FIN are set. + * and FIN are set. */ uint64_t L4_error:1; /* set if the packet is a fragment */ @@ -127,16 +127,16 @@ typedef union { * failure indicated in err_code below, decode: * * - 1 = Not IP: the IP version field is neither 4 nor - * 6. + * 6. * - 2 = IPv4 Header Checksum Error: the IPv4 header - * has a checksum violation. + * has a checksum violation. * - 3 = IP Malformed Header: the packet is not long - * enough to contain the IP header. + * enough to contain the IP header. * - 4 = IP Malformed: the packet is not long enough * to contain the bytes indicated by the IP * header. Pad is allowed. * - 5 = IP TTL Hop: the IPv4 TTL field or the IPv6 - * Hop Count field are zero. + * Hop Count field are zero. * - 6 = IP Options */ uint64_t IP_exc:1; @@ -243,46 +243,46 @@ typedef union { * decode: * * - 1 = partial error: a packet was partially - * received, but internal buffering / bandwidth - * was not adequate to receive the entire - * packet. + * received, but internal buffering / bandwidth + * was not adequate to receive the entire + * packet. * - 2 = jabber error: the RGMII packet was too large - * and is truncated. + * and is truncated. * - 3 = overrun error: the RGMII packet is longer - * than allowed and had an FCS error. + * than allowed and had an FCS error. * - 4 = oversize error: the RGMII packet is longer - * than allowed. + * than allowed. * - 5 = alignment error: the RGMII packet is not an - * integer number of bytes - * and had an FCS error (100M and 10M only). + * integer number of bytes + * and had an FCS error (100M and 10M only). * - 6 = fragment error: the RGMII packet is shorter - * than allowed and had an FCS error. + * than allowed and had an FCS error. * - 7 = GMX FCS error: the RGMII packet had an FCS - * error. + * error. * - 8 = undersize error: the RGMII packet is shorter - * than allowed. + * than allowed. * - 9 = extend error: the RGMII packet had an extend - * error. + * error. * - 10 = length mismatch error: the RGMII packet had - * a length that did not match the length field - * in the L2 HDR. + * a length that did not match the length field + * in the L2 HDR. * - 11 = RGMII RX error/SPI4 DIP4 Error: the RGMII - * packet had one or more data reception errors - * (RXERR) or the SPI4 packet had one or more - * DIP4 errors. + * packet had one or more data reception errors + * (RXERR) or the SPI4 packet had one or more + * DIP4 errors. * - 12 = RGMII skip error/SPI4 Abort Error: the RGMII - * packet was not large enough to cover the - * skipped bytes or the SPI4 packet was - * terminated with an About EOPS. + * packet was not large enough to cover the + * skipped bytes or the SPI4 packet was + * terminated with an About EOPS. * - 13 = RGMII nibble error/SPI4 Port NXA Error: the - * RGMII packet had a studder error (data not - * repeated - 10/100M only) or the SPI4 packet - * was sent to an NXA. + * RGMII packet had a studder error (data not + * repeated - 10/100M only) or the SPI4 packet + * was sent to an NXA. * - 16 = FCS error: a SPI4.2 packet had an FCS error. * - 17 = Skip error: a packet was not large enough to - * cover the skipped bytes. + * cover the skipped bytes. * - 18 = L2 header malformed: the packet is not long - * enough to contain the L2. + * enough to contain the L2. */ uint64_t rcv_error:1; @@ -309,7 +309,7 @@ typedef struct { /***************************************************************** * WORD 0 - * HW WRITE: the following 64 bits are filled by HW when a packet arrives + * HW WRITE: the following 64 bits are filled by HW when a packet arrives */ /** @@ -323,14 +323,14 @@ typedef struct { /** * Next pointer used by hardware for list maintenance. * May be written/read by HW before the work queue - * entry is scheduled to a PP + * entry is scheduled to a PP * (Only 36 bits used in Octeon 1) */ uint64_t next_ptr:40; /***************************************************************** * WORD 1 - * HW WRITE: the following 64 bits are filled by HW when a packet arrives + * HW WRITE: the following 64 bits are filled by HW when a packet arrives */ /** @@ -362,8 +362,8 @@ typedef struct { /** * WORD 2 HW WRITE: the following 64-bits are filled in by - * hardware when a packet arrives This indicates a variety of - * status and error conditions. + * hardware when a packet arrives This indicates a variety of + * status and error conditions. */ cvmx_pip_wqe_word2 word2; @@ -373,15 +373,15 @@ typedef struct { union cvmx_buf_ptr packet_ptr; /** - * HW WRITE: octeon will fill in a programmable amount from the - * packet, up to (at most, but perhaps less) the amount - * needed to fill the work queue entry to 128 bytes + * HW WRITE: octeon will fill in a programmable amount from the + * packet, up to (at most, but perhaps less) the amount + * needed to fill the work queue entry to 128 bytes * - * If the packet is recognized to be IP, the hardware starts - * (except that the IPv4 header is padded for appropriate - * alignment) writing here where the IP header starts. If the - * packet is not recognized to be IP, the hardware starts - * writing the beginning of the packet here. + * If the packet is recognized to be IP, the hardware starts + * (except that the IPv4 header is padded for appropriate + * alignment) writing here where the IP header starts. If the + * packet is not recognized to be IP, the hardware starts + * writing the beginning of the packet here. */ uint8_t packet_data[96]; diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h index db58bea..f991e77 100644 --- a/arch/mips/include/asm/octeon/cvmx.h +++ b/arch/mips/include/asm/octeon/cvmx.h @@ -76,14 +76,14 @@ enum cvmx_mips_space { #endif #if CVMX_ENABLE_DEBUG_PRINTS -#define cvmx_dprintf printk +#define cvmx_dprintf printk #else #define cvmx_dprintf(...) {} #endif -#define CVMX_MAX_CORES (16) -#define CVMX_CACHE_LINE_SIZE (128) /* In bytes */ -#define CVMX_CACHE_LINE_MASK (CVMX_CACHE_LINE_SIZE - 1) /* In bytes */ +#define CVMX_MAX_CORES (16) +#define CVMX_CACHE_LINE_SIZE (128) /* In bytes */ +#define CVMX_CACHE_LINE_MASK (CVMX_CACHE_LINE_SIZE - 1) /* In bytes */ #define CVMX_CACHE_LINE_ALIGNED __attribute__ ((aligned(CVMX_CACHE_LINE_SIZE))) #define CAST64(v) ((long long)(long)(v)) #define CASTPTR(type, v) ((type *)(long)(v)) @@ -133,8 +133,8 @@ static inline uint64_t cvmx_build_io_address(uint64_t major_did, * * Example: cvmx_build_bits(39,24,value) * <pre> - * 6 5 4 3 3 2 1 - * 3 5 7 9 1 3 5 7 0 + * 6 5 4 3 3 2 1 + * 3 5 7 9 1 3 5 7 0 * +-------+-------+-------+-------+-------+-------+-------+------+ * 000000000000000000000000___________value000000000000000000000000 * </pre> @@ -183,7 +183,7 @@ static inline uint64_t cvmx_ptr_to_phys(void *ptr) * memory pointer (void *). * * @physical_address: - * Hardware physical address to memory + * Hardware physical address to memory * Returns Pointer to memory */ static inline void *cvmx_phys_to_ptr(uint64_t physical_address) @@ -207,10 +207,10 @@ static inline void *cvmx_phys_to_ptr(uint64_t physical_address) /* We have a full 64bit ABI. Writing to a 64bit address can be done with a simple volatile pointer */ -#define CVMX_BUILD_WRITE64(TYPE, ST) \ -static inline void cvmx_write64_##TYPE(uint64_t addr, TYPE##_t val) \ -{ \ - *CASTPTR(volatile TYPE##_t, addr) = val; \ +#define CVMX_BUILD_WRITE64(TYPE, ST) \ +static inline void cvmx_write64_##TYPE(uint64_t addr, TYPE##_t val) \ +{ \ + *CASTPTR(volatile TYPE##_t, addr) = val; \ } @@ -221,19 +221,19 @@ static inline void cvmx_write64_##TYPE(uint64_t addr, TYPE##_t val) \ /* We have a full 64bit ABI. Writing to a 64bit address can be done with a simple volatile pointer */ -#define CVMX_BUILD_READ64(TYPE, LT) \ -static inline TYPE##_t cvmx_read64_##TYPE(uint64_t addr) \ -{ \ +#define CVMX_BUILD_READ64(TYPE, LT) \ +static inline TYPE##_t cvmx_read64_##TYPE(uint64_t addr) \ +{ \ return *CASTPTR(volatile TYPE##_t, addr); \ } /* The following defines 8 functions for writing to a 64bit address. Each takes two arguments, the address and the value to write. - cvmx_write64_int64 cvmx_write64_uint64 - cvmx_write64_int32 cvmx_write64_uint32 - cvmx_write64_int16 cvmx_write64_uint16 - cvmx_write64_int8 cvmx_write64_uint8 */ + cvmx_write64_int64 cvmx_write64_uint64 + cvmx_write64_int32 cvmx_write64_uint32 + cvmx_write64_int16 cvmx_write64_uint16 + cvmx_write64_int8 cvmx_write64_uint8 */ CVMX_BUILD_WRITE64(int64, "sd"); CVMX_BUILD_WRITE64(int32, "sw"); CVMX_BUILD_WRITE64(int16, "sh"); @@ -246,10 +246,10 @@ CVMX_BUILD_WRITE64(uint8, "sb"); /* The following defines 8 functions for reading from a 64bit address. Each takes the address as the only argument - cvmx_read64_int64 cvmx_read64_uint64 - cvmx_read64_int32 cvmx_read64_uint32 - cvmx_read64_int16 cvmx_read64_uint16 - cvmx_read64_int8 cvmx_read64_uint8 */ + cvmx_read64_int64 cvmx_read64_uint64 + cvmx_read64_int32 cvmx_read64_uint32 + cvmx_read64_int16 cvmx_read64_uint16 + cvmx_read64_int8 cvmx_read64_uint8 */ CVMX_BUILD_READ64(int64, "ld"); CVMX_BUILD_READ64(int32, "lw"); CVMX_BUILD_READ64(int16, "lh"); @@ -389,7 +389,7 @@ static inline void cvmx_wait(uint64_t cycles) /** * Reads a chip global cycle counter. This counts CPU cycles since - * chip reset. The counter is 64 bit. + * chip reset. The counter is 64 bit. * This register does not exist on CN38XX pass 1 silicion * * Returns Global chip cycle count since chip reset. @@ -453,7 +453,7 @@ static inline uint32_t cvmx_octeon_num_cores(void) /** * Read a byte of fuse data - * @byte_addr: address to read + * @byte_addr: address to read * * Returns fuse value: 0 or 1 */ diff --git a/arch/mips/include/asm/octeon/octeon-feature.h b/arch/mips/include/asm/octeon/octeon-feature.h index 8008da2..90e05a8 100644 --- a/arch/mips/include/asm/octeon/octeon-feature.h +++ b/arch/mips/include/asm/octeon/octeon-feature.h @@ -35,7 +35,7 @@ #include <asm/octeon/cvmx-rnm-defs.h> enum octeon_feature { - /* CN68XX uses port kinds for packet interface */ + /* CN68XX uses port kinds for packet interface */ OCTEON_FEATURE_PKND, /* CN68XX has different fields in word0 - word2 */ OCTEON_FEATURE_CN68XX_WQE, @@ -51,7 +51,7 @@ enum octeon_feature { OCTEON_FEATURE_DORM_CRYPTO, /* Does this Octeon support PCI express? */ OCTEON_FEATURE_PCIE, - /* Does this Octeon support SRIOs */ + /* Does this Octeon support SRIOs */ OCTEON_FEATURE_SRIO, /* Does this Octeon support Interlaken */ OCTEON_FEATURE_ILK, @@ -75,7 +75,7 @@ enum octeon_feature { /* Octeon MDIO block supports clause 45 transactions for 10 * Gig support */ OCTEON_FEATURE_MDIO_CLAUSE_45, - /* + /* * CN52XX and CN56XX used a block named NPEI for PCIe * access. Newer chips replaced this with SLI+DPI. */ @@ -94,10 +94,10 @@ static inline int cvmx_fuse_read(int fuse); * be kept out of fast path code. * * @feature: Feature to check for. This should always be a constant so the - * compiler can remove the switch statement through optimization. + * compiler can remove the switch statement through optimization. * * Returns Non zero if the feature exists. Zero if the feature does not - * exist. + * exist. */ static inline int octeon_has_feature(enum octeon_feature feature) { diff --git a/arch/mips/include/asm/octeon/octeon-model.h b/arch/mips/include/asm/octeon/octeon-model.h index 349bb2b..e2c122c 100644 --- a/arch/mips/include/asm/octeon/octeon-model.h +++ b/arch/mips/include/asm/octeon/octeon-model.h @@ -29,7 +29,7 @@ /* * The defines below should be used with the OCTEON_IS_MODEL() macro - * to determine what model of chip the software is running on. Models + * to determine what model of chip the software is running on. Models * ending in 'XX' match multiple models (families), while specific * models match only that model. If a pass (revision) is specified, * then only that revision will be matched. Care should be taken when @@ -40,183 +40,183 @@ * subject to change at anytime without notice. * * NOTE: only the OCTEON_IS_MODEL() macro/function and the OCTEON_CN* - * macros should be used outside of this file. All other macros are + * macros should be used outside of this file. All other macros are * for internal use only, and may change without notice. */ -#define OCTEON_FAMILY_MASK 0x00ffff00 +#define OCTEON_FAMILY_MASK 0x00ffff00 /* Flag bits in top byte */ /* Ignores revision in model checks */ -#define OM_IGNORE_REVISION 0x01000000 +#define OM_IGNORE_REVISION 0x01000000 /* Check submodels */ -#define OM_CHECK_SUBMODEL 0x02000000 +#define OM_CHECK_SUBMODEL 0x02000000 /* Match all models previous than the one specified */ #define OM_MATCH_PREVIOUS_MODELS 0x04000000 /* Ignores the minor revison on newer parts */ #define OM_IGNORE_MINOR_REVISION 0x08000000 -#define OM_FLAG_MASK 0xff000000 +#define OM_FLAG_MASK 0xff000000 /* Match all cn5XXX Octeon models. */ -#define OM_MATCH_5XXX_FAMILY_MODELS 0x20000000 +#define OM_MATCH_5XXX_FAMILY_MODELS 0x20000000 /* Match all cn6XXX Octeon models. */ -#define OM_MATCH_6XXX_FAMILY_MODELS 0x40000000 +#define OM_MATCH_6XXX_FAMILY_MODELS 0x40000000 /* Match all cnf7XXX Octeon models. */ -#define OM_MATCH_F7XXX_FAMILY_MODELS 0x80000000 +#define OM_MATCH_F7XXX_FAMILY_MODELS 0x80000000 /* * CNF7XXX models with new revision encoding */ -#define OCTEON_CNF71XX_PASS1_0 0x000d9400 +#define OCTEON_CNF71XX_PASS1_0 0x000d9400 -#define OCTEON_CNF71XX (OCTEON_CNF71XX_PASS1_0 | OM_IGNORE_REVISION) -#define OCTEON_CNF71XX_PASS1_X (OCTEON_CNF71XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CNF71XX (OCTEON_CNF71XX_PASS1_0 | OM_IGNORE_REVISION) +#define OCTEON_CNF71XX_PASS1_X (OCTEON_CNF71XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) /* * CN6XXX models with new revision encoding */ -#define OCTEON_CN68XX_PASS1_0 0x000d9100 -#define OCTEON_CN68XX_PASS1_1 0x000d9101 -#define OCTEON_CN68XX_PASS1_2 0x000d9102 -#define OCTEON_CN68XX_PASS2_0 0x000d9108 +#define OCTEON_CN68XX_PASS1_0 0x000d9100 +#define OCTEON_CN68XX_PASS1_1 0x000d9101 +#define OCTEON_CN68XX_PASS1_2 0x000d9102 +#define OCTEON_CN68XX_PASS2_0 0x000d9108 -#define OCTEON_CN68XX (OCTEON_CN68XX_PASS2_0 | OM_IGNORE_REVISION) -#define OCTEON_CN68XX_PASS1_X (OCTEON_CN68XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN68XX_PASS2_X (OCTEON_CN68XX_PASS2_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN68XX (OCTEON_CN68XX_PASS2_0 | OM_IGNORE_REVISION) +#define OCTEON_CN68XX_PASS1_X (OCTEON_CN68XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN68XX_PASS2_X (OCTEON_CN68XX_PASS2_0 | OM_IGNORE_MINOR_REVISION) #define OCTEON_CN68XX_PASS1 OCTEON_CN68XX_PASS1_X #define OCTEON_CN68XX_PASS2 OCTEON_CN68XX_PASS2_X -#define OCTEON_CN66XX_PASS1_0 0x000d9200 -#define OCTEON_CN66XX_PASS1_2 0x000d9202 +#define OCTEON_CN66XX_PASS1_0 0x000d9200 +#define OCTEON_CN66XX_PASS1_2 0x000d9202 -#define OCTEON_CN66XX (OCTEON_CN66XX_PASS1_0 | OM_IGNORE_REVISION) -#define OCTEON_CN66XX_PASS1_X (OCTEON_CN66XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN66XX (OCTEON_CN66XX_PASS1_0 | OM_IGNORE_REVISION) +#define OCTEON_CN66XX_PASS1_X (OCTEON_CN66XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN63XX_PASS1_0 0x000d9000 -#define OCTEON_CN63XX_PASS1_1 0x000d9001 -#define OCTEON_CN63XX_PASS1_2 0x000d9002 -#define OCTEON_CN63XX_PASS2_0 0x000d9008 -#define OCTEON_CN63XX_PASS2_1 0x000d9009 -#define OCTEON_CN63XX_PASS2_2 0x000d900a +#define OCTEON_CN63XX_PASS1_0 0x000d9000 +#define OCTEON_CN63XX_PASS1_1 0x000d9001 +#define OCTEON_CN63XX_PASS1_2 0x000d9002 +#define OCTEON_CN63XX_PASS2_0 0x000d9008 +#define OCTEON_CN63XX_PASS2_1 0x000d9009 +#define OCTEON_CN63XX_PASS2_2 0x000d900a -#define OCTEON_CN63XX (OCTEON_CN63XX_PASS2_0 | OM_IGNORE_REVISION) -#define OCTEON_CN63XX_PASS1_X (OCTEON_CN63XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN63XX_PASS2_X (OCTEON_CN63XX_PASS2_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN63XX (OCTEON_CN63XX_PASS2_0 | OM_IGNORE_REVISION) +#define OCTEON_CN63XX_PASS1_X (OCTEON_CN63XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN63XX_PASS2_X (OCTEON_CN63XX_PASS2_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN61XX_PASS1_0 0x000d9300 +#define OCTEON_CN61XX_PASS1_0 0x000d9300 -#define OCTEON_CN61XX (OCTEON_CN61XX_PASS1_0 | OM_IGNORE_REVISION) -#define OCTEON_CN61XX_PASS1_X (OCTEON_CN61XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN61XX (OCTEON_CN61XX_PASS1_0 | OM_IGNORE_REVISION) +#define OCTEON_CN61XX_PASS1_X (OCTEON_CN61XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) /* * CN5XXX models with new revision encoding */ -#define OCTEON_CN58XX_PASS1_0 0x000d0300 -#define OCTEON_CN58XX_PASS1_1 0x000d0301 -#define OCTEON_CN58XX_PASS1_2 0x000d0303 -#define OCTEON_CN58XX_PASS2_0 0x000d0308 -#define OCTEON_CN58XX_PASS2_1 0x000d0309 -#define OCTEON_CN58XX_PASS2_2 0x000d030a -#define OCTEON_CN58XX_PASS2_3 0x000d030b - -#define OCTEON_CN58XX (OCTEON_CN58XX_PASS1_0 | OM_IGNORE_REVISION) -#define OCTEON_CN58XX_PASS1_X (OCTEON_CN58XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN58XX_PASS2_X (OCTEON_CN58XX_PASS2_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN58XX_PASS1 OCTEON_CN58XX_PASS1_X -#define OCTEON_CN58XX_PASS2 OCTEON_CN58XX_PASS2_X - -#define OCTEON_CN56XX_PASS1_0 0x000d0400 -#define OCTEON_CN56XX_PASS1_1 0x000d0401 -#define OCTEON_CN56XX_PASS2_0 0x000d0408 -#define OCTEON_CN56XX_PASS2_1 0x000d0409 - -#define OCTEON_CN56XX (OCTEON_CN56XX_PASS2_0 | OM_IGNORE_REVISION) -#define OCTEON_CN56XX_PASS1_X (OCTEON_CN56XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN56XX_PASS2_X (OCTEON_CN56XX_PASS2_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN56XX_PASS1 OCTEON_CN56XX_PASS1_X -#define OCTEON_CN56XX_PASS2 OCTEON_CN56XX_PASS2_X - -#define OCTEON_CN57XX OCTEON_CN56XX -#define OCTEON_CN57XX_PASS1 OCTEON_CN56XX_PASS1 -#define OCTEON_CN57XX_PASS2 OCTEON_CN56XX_PASS2 - -#define OCTEON_CN55XX OCTEON_CN56XX -#define OCTEON_CN55XX_PASS1 OCTEON_CN56XX_PASS1 -#define OCTEON_CN55XX_PASS2 OCTEON_CN56XX_PASS2 - -#define OCTEON_CN54XX OCTEON_CN56XX -#define OCTEON_CN54XX_PASS1 OCTEON_CN56XX_PASS1 -#define OCTEON_CN54XX_PASS2 OCTEON_CN56XX_PASS2 - -#define OCTEON_CN50XX_PASS1_0 0x000d0600 - -#define OCTEON_CN50XX (OCTEON_CN50XX_PASS1_0 | OM_IGNORE_REVISION) -#define OCTEON_CN50XX_PASS1_X (OCTEON_CN50XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN50XX_PASS1 OCTEON_CN50XX_PASS1_X +#define OCTEON_CN58XX_PASS1_0 0x000d0300 +#define OCTEON_CN58XX_PASS1_1 0x000d0301 +#define OCTEON_CN58XX_PASS1_2 0x000d0303 +#define OCTEON_CN58XX_PASS2_0 0x000d0308 +#define OCTEON_CN58XX_PASS2_1 0x000d0309 +#define OCTEON_CN58XX_PASS2_2 0x000d030a +#define OCTEON_CN58XX_PASS2_3 0x000d030b + +#define OCTEON_CN58XX (OCTEON_CN58XX_PASS1_0 | OM_IGNORE_REVISION) +#define OCTEON_CN58XX_PASS1_X (OCTEON_CN58XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN58XX_PASS2_X (OCTEON_CN58XX_PASS2_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN58XX_PASS1 OCTEON_CN58XX_PASS1_X +#define OCTEON_CN58XX_PASS2 OCTEON_CN58XX_PASS2_X + +#define OCTEON_CN56XX_PASS1_0 0x000d0400 +#define OCTEON_CN56XX_PASS1_1 0x000d0401 +#define OCTEON_CN56XX_PASS2_0 0x000d0408 +#define OCTEON_CN56XX_PASS2_1 0x000d0409 + +#define OCTEON_CN56XX (OCTEON_CN56XX_PASS2_0 | OM_IGNORE_REVISION) +#define OCTEON_CN56XX_PASS1_X (OCTEON_CN56XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN56XX_PASS2_X (OCTEON_CN56XX_PASS2_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN56XX_PASS1 OCTEON_CN56XX_PASS1_X +#define OCTEON_CN56XX_PASS2 OCTEON_CN56XX_PASS2_X + +#define OCTEON_CN57XX OCTEON_CN56XX +#define OCTEON_CN57XX_PASS1 OCTEON_CN56XX_PASS1 +#define OCTEON_CN57XX_PASS2 OCTEON_CN56XX_PASS2 + +#define OCTEON_CN55XX OCTEON_CN56XX +#define OCTEON_CN55XX_PASS1 OCTEON_CN56XX_PASS1 +#define OCTEON_CN55XX_PASS2 OCTEON_CN56XX_PASS2 + +#define OCTEON_CN54XX OCTEON_CN56XX +#define OCTEON_CN54XX_PASS1 OCTEON_CN56XX_PASS1 +#define OCTEON_CN54XX_PASS2 OCTEON_CN56XX_PASS2 + +#define OCTEON_CN50XX_PASS1_0 0x000d0600 + +#define OCTEON_CN50XX (OCTEON_CN50XX_PASS1_0 | OM_IGNORE_REVISION) +#define OCTEON_CN50XX_PASS1_X (OCTEON_CN50XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN50XX_PASS1 OCTEON_CN50XX_PASS1_X /* * NOTE: Octeon CN5000F model is not identifiable using the * OCTEON_IS_MODEL() functions, but are treated as CN50XX. */ -#define OCTEON_CN52XX_PASS1_0 0x000d0700 -#define OCTEON_CN52XX_PASS2_0 0x000d0708 +#define OCTEON_CN52XX_PASS1_0 0x000d0700 +#define OCTEON_CN52XX_PASS2_0 0x000d0708 -#define OCTEON_CN52XX (OCTEON_CN52XX_PASS2_0 | OM_IGNORE_REVISION) -#define OCTEON_CN52XX_PASS1_X (OCTEON_CN52XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN52XX_PASS2_X (OCTEON_CN52XX_PASS2_0 | OM_IGNORE_MINOR_REVISION) -#define OCTEON_CN52XX_PASS1 OCTEON_CN52XX_PASS1_X -#define OCTEON_CN52XX_PASS2 OCTEON_CN52XX_PASS2_X +#define OCTEON_CN52XX (OCTEON_CN52XX_PASS2_0 | OM_IGNORE_REVISION) +#define OCTEON_CN52XX_PASS1_X (OCTEON_CN52XX_PASS1_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN52XX_PASS2_X (OCTEON_CN52XX_PASS2_0 | OM_IGNORE_MINOR_REVISION) +#define OCTEON_CN52XX_PASS1 OCTEON_CN52XX_PASS1_X +#define OCTEON_CN52XX_PASS2 OCTEON_CN52XX_PASS2_X /* * CN3XXX models with old revision enconding */ -#define OCTEON_CN38XX_PASS1 0x000d0000 -#define OCTEON_CN38XX_PASS2 0x000d0001 -#define OCTEON_CN38XX_PASS3 0x000d0003 -#define OCTEON_CN38XX (OCTEON_CN38XX_PASS3 | OM_IGNORE_REVISION) +#define OCTEON_CN38XX_PASS1 0x000d0000 +#define OCTEON_CN38XX_PASS2 0x000d0001 +#define OCTEON_CN38XX_PASS3 0x000d0003 +#define OCTEON_CN38XX (OCTEON_CN38XX_PASS3 | OM_IGNORE_REVISION) -#define OCTEON_CN36XX OCTEON_CN38XX -#define OCTEON_CN36XX_PASS2 OCTEON_CN38XX_PASS2 -#define OCTEON_CN36XX_PASS3 OCTEON_CN38XX_PASS3 +#define OCTEON_CN36XX OCTEON_CN38XX +#define OCTEON_CN36XX_PASS2 OCTEON_CN38XX_PASS2 +#define OCTEON_CN36XX_PASS3 OCTEON_CN38XX_PASS3 /* The OCTEON_CN31XX matches CN31XX models and the CN3020 */ -#define OCTEON_CN31XX_PASS1 0x000d0100 -#define OCTEON_CN31XX_PASS1_1 0x000d0102 -#define OCTEON_CN31XX (OCTEON_CN31XX_PASS1 | OM_IGNORE_REVISION) +#define OCTEON_CN31XX_PASS1 0x000d0100 +#define OCTEON_CN31XX_PASS1_1 0x000d0102 +#define OCTEON_CN31XX (OCTEON_CN31XX_PASS1 | OM_IGNORE_REVISION) /* * This model is only used for internal checks, it is not a valid * model for the OCTEON_MODEL environment variable. This matches the * CN3010 and CN3005 but NOT the CN3020. */ -#define OCTEON_CN30XX_PASS1 0x000d0200 -#define OCTEON_CN30XX_PASS1_1 0x000d0202 -#define OCTEON_CN30XX (OCTEON_CN30XX_PASS1 | OM_IGNORE_REVISION) +#define OCTEON_CN30XX_PASS1 0x000d0200 +#define OCTEON_CN30XX_PASS1_1 0x000d0202 +#define OCTEON_CN30XX (OCTEON_CN30XX_PASS1 | OM_IGNORE_REVISION) -#define OCTEON_CN3005_PASS1 (0x000d0210 | OM_CHECK_SUBMODEL) -#define OCTEON_CN3005_PASS1_0 (0x000d0210 | OM_CHECK_SUBMODEL) -#define OCTEON_CN3005_PASS1_1 (0x000d0212 | OM_CHECK_SUBMODEL) -#define OCTEON_CN3005 (OCTEON_CN3005_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL) +#define OCTEON_CN3005_PASS1 (0x000d0210 | OM_CHECK_SUBMODEL) +#define OCTEON_CN3005_PASS1_0 (0x000d0210 | OM_CHECK_SUBMODEL) +#define OCTEON_CN3005_PASS1_1 (0x000d0212 | OM_CHECK_SUBMODEL) +#define OCTEON_CN3005 (OCTEON_CN3005_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL) -#define OCTEON_CN3010_PASS1 (0x000d0200 | OM_CHECK_SUBMODEL) -#define OCTEON_CN3010_PASS1_0 (0x000d0200 | OM_CHECK_SUBMODEL) -#define OCTEON_CN3010_PASS1_1 (0x000d0202 | OM_CHECK_SUBMODEL) -#define OCTEON_CN3010 (OCTEON_CN3010_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL) +#define OCTEON_CN3010_PASS1 (0x000d0200 | OM_CHECK_SUBMODEL) +#define OCTEON_CN3010_PASS1_0 (0x000d0200 | OM_CHECK_SUBMODEL) +#define OCTEON_CN3010_PASS1_1 (0x000d0202 | OM_CHECK_SUBMODEL) +#define OCTEON_CN3010 (OCTEON_CN3010_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL) -#define OCTEON_CN3020_PASS1 (0x000d0110 | OM_CHECK_SUBMODEL) -#define OCTEON_CN3020_PASS1_0 (0x000d0110 | OM_CHECK_SUBMODEL) -#define OCTEON_CN3020_PASS1_1 (0x000d0112 | OM_CHECK_SUBMODEL) -#define OCTEON_CN3020 (OCTEON_CN3020_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL) +#define OCTEON_CN3020_PASS1 (0x000d0110 | OM_CHECK_SUBMODEL) +#define OCTEON_CN3020_PASS1_0 (0x000d0110 | OM_CHECK_SUBMODEL) +#define OCTEON_CN3020_PASS1_1 (0x000d0112 | OM_CHECK_SUBMODEL) +#define OCTEON_CN3020 (OCTEON_CN3020_PASS1 | OM_IGNORE_REVISION | OM_CHECK_SUBMODEL) /* * This matches the complete family of CN3xxx CPUs, and not subsequent * models */ -#define OCTEON_CN3XXX (OCTEON_CN58XX_PASS1_0 | OM_MATCH_PREVIOUS_MODELS | OM_IGNORE_REVISION) -#define OCTEON_CN5XXX (OCTEON_CN58XX_PASS1_0 | OM_MATCH_5XXX_FAMILY_MODELS) -#define OCTEON_CN6XXX (OCTEON_CN63XX_PASS1_0 | OM_MATCH_6XXX_FAMILY_MODELS) +#define OCTEON_CN3XXX (OCTEON_CN58XX_PASS1_0 | OM_MATCH_PREVIOUS_MODELS | OM_IGNORE_REVISION) +#define OCTEON_CN5XXX (OCTEON_CN58XX_PASS1_0 | OM_MATCH_5XXX_FAMILY_MODELS) +#define OCTEON_CN6XXX (OCTEON_CN63XX_PASS1_0 | OM_MATCH_6XXX_FAMILY_MODELS) /* These are used to cover entire families of OCTEON processors */ #define OCTEON_FAM_1 (OCTEON_CN3XXX) @@ -243,18 +243,18 @@ */ /* Masks used for the various types of model/family/revision matching */ -#define OCTEON_38XX_FAMILY_MASK 0x00ffff00 +#define OCTEON_38XX_FAMILY_MASK 0x00ffff00 #define OCTEON_38XX_FAMILY_REV_MASK 0x00ffff0f -#define OCTEON_38XX_MODEL_MASK 0x00ffff10 +#define OCTEON_38XX_MODEL_MASK 0x00ffff10 #define OCTEON_38XX_MODEL_REV_MASK (OCTEON_38XX_FAMILY_REV_MASK | OCTEON_38XX_MODEL_MASK) /* CN5XXX and later use different layout of bits in the revision ID field */ -#define OCTEON_58XX_FAMILY_MASK OCTEON_38XX_FAMILY_MASK +#define OCTEON_58XX_FAMILY_MASK OCTEON_38XX_FAMILY_MASK #define OCTEON_58XX_FAMILY_REV_MASK 0x00ffff3f -#define OCTEON_58XX_MODEL_MASK 0x00ffffc0 +#define OCTEON_58XX_MODEL_MASK 0x00ffffc0 #define OCTEON_58XX_MODEL_REV_MASK (OCTEON_58XX_FAMILY_REV_MASK | OCTEON_58XX_MODEL_MASK) #define OCTEON_58XX_MODEL_MINOR_REV_MASK (OCTEON_58XX_MODEL_REV_MASK & 0x00fffff8) -#define OCTEON_5XXX_MODEL_MASK 0x00ff0fc0 +#define OCTEON_5XXX_MODEL_MASK 0x00ff0fc0 /* forward declarations */ static inline uint32_t cvmx_get_proc_id(void) __attribute__ ((pure)); @@ -264,7 +264,7 @@ static inline uint64_t cvmx_read_csr(uint64_t csr_addr); /* NOTE: This for internal use only! */ #define __OCTEON_IS_MODEL_COMPILE__(arg_model, chip_model) \ -((((arg_model & OCTEON_38XX_FAMILY_MASK) < OCTEON_CN58XX_PASS1_0) && ( \ +((((arg_model & OCTEON_38XX_FAMILY_MASK) < OCTEON_CN58XX_PASS1_0) && ( \ ((((arg_model) & (OM_FLAG_MASK)) == (OM_IGNORE_REVISION | OM_CHECK_SUBMODEL)) \ && __OCTEON_MATCH_MASK__((chip_model), (arg_model), OCTEON_38XX_MODEL_MASK)) || \ ((((arg_model) & (OM_FLAG_MASK)) == 0) \ @@ -276,7 +276,7 @@ static inline uint64_t cvmx_read_csr(uint64_t csr_addr); ((((arg_model) & (OM_MATCH_PREVIOUS_MODELS)) == OM_MATCH_PREVIOUS_MODELS) \ && (((chip_model) & OCTEON_38XX_MODEL_MASK) < ((arg_model) & OCTEON_38XX_MODEL_MASK))) \ )) || \ - (((arg_model & OCTEON_38XX_FAMILY_MASK) >= OCTEON_CN58XX_PASS1_0) && ( \ + (((arg_model & OCTEON_38XX_FAMILY_MASK) >= OCTEON_CN58XX_PASS1_0) && ( \ ((((arg_model) & (OM_FLAG_MASK)) == (OM_IGNORE_REVISION | OM_CHECK_SUBMODEL)) \ && __OCTEON_MATCH_MASK__((chip_model), (arg_model), OCTEON_58XX_MODEL_MASK)) || \ ((((arg_model) & (OM_FLAG_MASK)) == 0) \ @@ -320,7 +320,7 @@ static inline int __octeon_is_model_runtime__(uint32_t model) * Use of the macro in preprocessor directives ( #if OCTEON_IS_MODEL(...) ) * is NOT SUPPORTED, and should be replaced with CVMX_COMPILED_FOR() * I.e.: - * #if OCTEON_IS_MODEL(OCTEON_CN56XX) -> #if CVMX_COMPILED_FOR(OCTEON_CN56XX) + * #if OCTEON_IS_MODEL(OCTEON_CN56XX) -> #if CVMX_COMPILED_FOR(OCTEON_CN56XX) */ #define OCTEON_IS_MODEL(x) __octeon_is_model_runtime__(x) #define OCTEON_IS_COMMON_BINARY() 1 diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h index 254e995..a2eed23 100644 --- a/arch/mips/include/asm/octeon/octeon.h +++ b/arch/mips/include/asm/octeon/octeon.h @@ -75,15 +75,15 @@ struct octeon_boot_descriptor { uint32_t argc; uint32_t argv[OCTEON_ARGV_MAX_ARGS]; -#define BOOT_FLAG_INIT_CORE (1 << 0) -#define OCTEON_BL_FLAG_DEBUG (1 << 1) -#define OCTEON_BL_FLAG_NO_MAGIC (1 << 2) +#define BOOT_FLAG_INIT_CORE (1 << 0) +#define OCTEON_BL_FLAG_DEBUG (1 << 1) +#define OCTEON_BL_FLAG_NO_MAGIC (1 << 2) /* If set, use uart1 for console */ -#define OCTEON_BL_FLAG_CONSOLE_UART1 (1 << 3) +#define OCTEON_BL_FLAG_CONSOLE_UART1 (1 << 3) /* If set, use PCI console */ -#define OCTEON_BL_FLAG_CONSOLE_PCI (1 << 4) +#define OCTEON_BL_FLAG_CONSOLE_PCI (1 << 4) /* Call exit on break on serial port */ -#define OCTEON_BL_FLAG_BREAK (1 << 5) +#define OCTEON_BL_FLAG_BREAK (1 << 5) uint32_t flags; uint32_t core_mask; diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h index c66734b..64ba56a 100644 --- a/arch/mips/include/asm/octeon/pci-octeon.h +++ b/arch/mips/include/asm/octeon/pci-octeon.h @@ -22,7 +22,7 @@ #define CVMX_PCIE_BAR1_PHYS_SIZE (1ull << 28) /* - * The RC base of BAR1. gen1 has a 39-bit BAR2, gen2 has 41-bit BAR2, + * The RC base of BAR1. gen1 has a 39-bit BAR2, gen2 has 41-bit BAR2, * place BAR1 so it is the same for both. */ #define CVMX_PCIE_BAR1_RC_BASE (1ull << 41) diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h index 9ce5a1e..2474fc5 100644 --- a/arch/mips/include/asm/paccess.h +++ b/arch/mips/include/asm/paccess.h @@ -43,7 +43,7 @@ struct __large_pstruct { unsigned long buf[100]; }; case 1: __get_dbe_asm("lb"); break; \ case 2: __get_dbe_asm("lh"); break; \ case 4: __get_dbe_asm("lw"); break; \ - case 8: __get_dbe_asm("ld"); break; \ + case 8: __get_dbe_asm("ld"); break; \ default: __get_dbe_unknown(); break; \ } \ x = (__typeof__(*(ptr))) __gu_val; \ diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index dbaec94..99fc547 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -31,7 +31,7 @@ #define PAGE_SHIFT 16 #endif #define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE - 1)) +#define PAGE_MASK (~(PAGE_SIZE - 1)) #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT #define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3) @@ -95,11 +95,11 @@ extern void copy_user_highpage(struct page *to, struct page *from, #ifdef CONFIG_64BIT_PHYS_ADDR #ifdef CONFIG_CPU_MIPS32 typedef struct { unsigned long pte_low, pte_high; } pte_t; - #define pte_val(x) ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) - #define __pte(x) ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) + #define pte_val(x) ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) + #define __pte(x) ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) #else typedef struct { unsigned long long pte; } pte_t; - #define pte_val(x) ((x).pte) + #define pte_val(x) ((x).pte) #define __pte(x) ((pte_t) { (x) } ) #endif #else @@ -191,8 +191,8 @@ typedef struct { unsigned long pgprot; } pgprot_t; unsigned long __pfn = (pfn); \ int __n = pfn_to_nid(__pfn); \ ((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn + \ - NODE_DATA(__n)->node_spanned_pages) \ - : 0); \ + NODE_DATA(__n)->node_spanned_pages) \ + : 0); \ }) #endif @@ -206,7 +206,7 @@ extern int __virt_addr_valid(const volatile void *kaddr); #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) -#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \ +#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \ PHYS_OFFSET) #define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \ PHYS_OFFSET) diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index d69ea74..b8e24fd 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -12,7 +12,7 @@ /* * This file essentially defines the interface between board - * specific PCI code and MIPS common PCI code. Should potentially put + * specific PCI code and MIPS common PCI code. Should potentially put * into include/asm/pci.h file. */ @@ -20,7 +20,7 @@ #include <linux/of.h> /* - * Each pci channel is a top-level PCI bus seem by CPU. A machine with + * Each pci channel is a top-level PCI bus seem by CPU. A machine with * multiple PCI channels may have multiple PCI host controllers or a * single controller supporting multiple channels. */ @@ -99,7 +99,7 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, struct pci_dev; /* - * The PCI address space does equal the physical memory address space. The + * The PCI address space does equal the physical memory address space. The * networking and block device layers use this boolean for bounce buffer * decisions. This is set if any hose does not have an IOMMU. */ @@ -144,8 +144,13 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) extern char * (*pcibios_plat_setup)(char *str); +#ifdef CONFIG_OF /* this function parses memory ranges from a device node */ extern void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node); +#else +static inline void pci_load_of_ranges(struct pci_controller *hose, + struct device_node *node) {} +#endif #endif /* _ASM_PCI_H */ diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h index be44fb0..af2c8a3 100644 --- a/arch/mips/include/asm/pci/bridge.h +++ b/arch/mips/include/asm/pci/bridge.h @@ -85,7 +85,7 @@ typedef volatile struct bridge_s { #define b_wid_llp b_widget.w_llp_cfg #define b_wid_tflush b_widget.w_tflush - /* bridge-specific widget configuration 0x000058-0x00007F */ + /* bridge-specific widget configuration 0x000058-0x00007F */ bridgereg_t _pad_000058; bridgereg_t b_wid_aux_err; /* 0x00005C */ bridgereg_t _pad_000060; @@ -167,8 +167,8 @@ typedef volatile struct bridge_s { bridgereg_t __pad; /* 0x0002{80,,,88} */ bridgereg_t reg; /* 0x0002{84,,,8C} */ } b_rrb_map[2]; /* 0x000280 */ -#define b_even_resp b_rrb_map[0].reg /* 0x000284 */ -#define b_odd_resp b_rrb_map[1].reg /* 0x00028C */ +#define b_even_resp b_rrb_map[0].reg /* 0x000284 */ +#define b_odd_resp b_rrb_map[1].reg /* 0x00028C */ bridgereg_t _pad_000290; bridgereg_t b_resp_status; /* 0x000294 */ @@ -233,7 +233,7 @@ typedef volatile struct bridge_s { u8 _pad_030007[0x04fff8]; /* 0x030008-0x07FFFF */ /* External Address Translation Entry RAM 0x080000-0x0FFFFF */ - bridge_ate_t b_ext_ate_ram[0x10000]; + bridge_ate_t b_ext_ate_ram[0x10000]; /* Reserved 0x100000-0x1FFFFF */ char _pad_100000[0x200000-0x100000]; @@ -400,7 +400,7 @@ typedef struct bridge_err_cmdword_s { #define BRIDGE_REV_A 0x1 #define BRIDGE_REV_B 0x2 #define BRIDGE_REV_C 0x3 -#define BRIDGE_REV_D 0x4 +#define BRIDGE_REV_D 0x4 /* Bridge widget status register bits definition */ @@ -691,21 +691,21 @@ typedef struct bridge_err_cmdword_s { #define BRIDGE_CREDIT 3 /* RRB assignment register */ -#define BRIDGE_RRB_EN 0x8 /* after shifting down */ -#define BRIDGE_RRB_DEV 0x7 /* after shifting down */ -#define BRIDGE_RRB_VDEV 0x4 /* after shifting down */ -#define BRIDGE_RRB_PDEV 0x3 /* after shifting down */ +#define BRIDGE_RRB_EN 0x8 /* after shifting down */ +#define BRIDGE_RRB_DEV 0x7 /* after shifting down */ +#define BRIDGE_RRB_VDEV 0x4 /* after shifting down */ +#define BRIDGE_RRB_PDEV 0x3 /* after shifting down */ /* RRB status register */ -#define BRIDGE_RRB_VALID(r) (0x00010000<<(r)) -#define BRIDGE_RRB_INUSE(r) (0x00000001<<(r)) +#define BRIDGE_RRB_VALID(r) (0x00010000<<(r)) +#define BRIDGE_RRB_INUSE(r) (0x00000001<<(r)) /* RRB clear register */ -#define BRIDGE_RRB_CLEAR(r) (0x00000001<<(r)) +#define BRIDGE_RRB_CLEAR(r) (0x00000001<<(r)) /* xbox system controller declarations */ -#define XBOX_BRIDGE_WID 8 -#define FLASH_PROM1_BASE 0xE00000 /* To read the xbox sysctlr status */ +#define XBOX_BRIDGE_WID 8 +#define FLASH_PROM1_BASE 0xE00000 /* To read the xbox sysctlr status */ #define XBOX_RPS_EXISTS 1 << 6 /* RPS bit in status register */ #define XBOX_RPS_FAIL 1 << 4 /* RPS status bit in register */ @@ -838,7 +838,7 @@ struct bridge_controller { bridge_t *base; nasid_t nasid; unsigned int widget_id; - unsigned int irq_cpu; + unsigned int irq_cpu; u64 baddr; unsigned int pci_int[8]; }; diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h index 5d56bb2..b4204c1 100644 --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -47,7 +47,7 @@ #define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 -#define VMALLOC_START MAP_BASE +#define VMALLOC_START MAP_BASE #define PKMAP_BASE (0xfe000000UL) @@ -136,7 +136,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot) #define pte_offset_kernel(dir, address) \ ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address)) -#define pte_offset_map(dir, address) \ +#define pte_offset_map(dir, address) \ ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address)) #define pte_unmap(pte) ((void)(pte)) @@ -155,7 +155,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot) #define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \ (((_pte).pte >> 2 ) & 0x38) | \ - (((_pte).pte >> 10) << 6 )) + (((_pte).pte >> 10) << 6 )) #define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \ (((off) & 0x38) << 2 ) | \ @@ -167,14 +167,14 @@ pfn_pte(unsigned long pfn, pgprot_t prot) /* Swap entries must have VALID and GLOBAL bits cleared. */ #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) #define __swp_type(x) (((x).val >> 2) & 0x1f) -#define __swp_offset(x) ((x).val >> 7) +#define __swp_offset(x) ((x).val >> 7) #define __swp_entry(type,offset) \ - ((swp_entry_t) { ((type) << 2) | ((offset) << 7) }) + ((swp_entry_t) { ((type) << 2) | ((offset) << 7) }) #else #define __swp_type(x) (((x).val >> 8) & 0x1f) -#define __swp_offset(x) ((x).val >> 13) +#define __swp_offset(x) ((x).val >> 13) #define __swp_entry(type,offset) \ - ((swp_entry_t) { ((type) << 8) | ((offset) << 13) }) + ((swp_entry_t) { ((type) << 8) | ((offset) << 13) }) #endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) @@ -184,7 +184,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot) #define PTE_FILE_MAX_BITS 30 #define pte_to_pgoff(_pte) ((_pte).pte_high >> 2) -#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 }) +#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 }) #else /* @@ -194,7 +194,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot) #define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \ (((_pte).pte >> 2) & 0x8) | \ - (((_pte).pte >> 8) << 4)) + (((_pte).pte >> 8) << 4)) #define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \ (((off) & 0x8) << 2) | \ @@ -208,7 +208,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot) #define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high }) #define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val }) #else -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val }) #endif diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 013d5f7..e1c49a9 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -115,7 +115,7 @@ #define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) #if PGDIR_SIZE >= TASK_SIZE64 -#define USER_PTRS_PER_PGD (1) +#define USER_PTRS_PER_PGD (1) #else #define USER_PTRS_PER_PGD (TASK_SIZE64 / PGDIR_SIZE) #endif @@ -288,7 +288,7 @@ static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) #define __swp_type(x) (((x).val >> 32) & 0xff) #define __swp_offset(x) ((x).val >> 40) #define __swp_entry(type, offset) ((swp_entry_t) { pte_val(mk_swap_pte((type), (offset))) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val }) /* diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h index f6a0439..32aea48 100644 --- a/arch/mips/include/asm/pgtable-bits.h +++ b/arch/mips/include/asm/pgtable-bits.h @@ -21,7 +21,7 @@ * Similar to the Alpha port, we need to keep track of the ref * and mod bits in software. We have a software "yeah you can read * from this page" bit, and a hardware one which actually lets the - * process read from the page. On the same token we have a software + * process read from the page. On the same token we have a software * writable bit and the real hardware one which actually lets the * process write to the page, this keeps a mod bit via the hardware * dirty bit. @@ -41,9 +41,9 @@ #define _PAGE_GLOBAL (1 << 0) #define _PAGE_VALID_SHIFT 1 #define _PAGE_VALID (1 << _PAGE_VALID_SHIFT) -#define _PAGE_SILENT_READ (1 << 1) /* synonym */ +#define _PAGE_SILENT_READ (1 << 1) /* synonym */ #define _PAGE_DIRTY_SHIFT 2 -#define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT) /* The MIPS dirty bit */ +#define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT) /* The MIPS dirty bit */ #define _PAGE_SILENT_WRITE (1 << 2) #define _CACHE_SHIFT 3 #define _CACHE_MASK (7 << 3) @@ -52,7 +52,7 @@ * The following bits are implemented in software * * _PAGE_FILE semantics: set:pagecache unset:swap - */ + */ #define _PAGE_PRESENT_SHIFT 6 #define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT) #define _PAGE_READ_SHIFT 7 @@ -134,7 +134,7 @@ #define _PAGE_HUGE (1 << _PAGE_HUGE_SHIFT) #else #define _PAGE_HUGE_SHIFT (_PAGE_MODIFIED_SHIFT) -#define _PAGE_HUGE ({BUG(); 1; }) /* Dummy value */ +#define _PAGE_HUGE ({BUG(); 1; }) /* Dummy value */ #endif #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT @@ -143,7 +143,7 @@ #define _PAGE_SPLITTING (1 << _PAGE_SPLITTING_SHIFT) #else #define _PAGE_SPLITTING_SHIFT (_PAGE_HUGE_SHIFT) -#define _PAGE_SPLITTING ({BUG(); 1; }) /* Dummy value */ +#define _PAGE_SPLITTING ({BUG(); 1; }) /* Dummy value */ #endif /* Page cannot be executed */ @@ -159,10 +159,10 @@ #define _PAGE_VALID_SHIFT (_PAGE_GLOBAL_SHIFT + 1) #define _PAGE_VALID (1 << _PAGE_VALID_SHIFT) -/* synonym */ +/* synonym */ #define _PAGE_SILENT_READ (_PAGE_VALID) -/* The MIPS dirty bit */ +/* The MIPS dirty bit */ #define _PAGE_DIRTY_SHIFT (_PAGE_VALID_SHIFT + 1) #define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT) #define _PAGE_SILENT_WRITE (_PAGE_DIRTY) @@ -175,7 +175,7 @@ #endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */ #ifndef _PFN_SHIFT -#define _PFN_SHIFT PAGE_SHIFT +#define _PFN_SHIFT PAGE_SHIFT #endif #define _PFN_MASK (~((1 << (_PFN_SHIFT)) - 1)) @@ -230,28 +230,28 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val) /* No penalty for being coherent on the SB1, so just use it for "noncoherent" spaces, too. Shouldn't hurt. */ -#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) -#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) +#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) +#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) #define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT) #define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) #else -#define _CACHE_CACHABLE_NO_WA (0<<_CACHE_SHIFT) /* R4600 only */ -#define _CACHE_CACHABLE_WA (1<<_CACHE_SHIFT) /* R4600 only */ -#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) /* R4[0246]00 */ -#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT) /* R4[0246]00 */ -#define _CACHE_CACHABLE_CE (4<<_CACHE_SHIFT) /* R4[04]00MC only */ -#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) /* R4[04]00MC only */ -#define _CACHE_CACHABLE_COHERENT (5<<_CACHE_SHIFT) /* MIPS32R2 CMP */ -#define _CACHE_CACHABLE_CUW (6<<_CACHE_SHIFT) /* R4[04]00MC only */ -#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) /* R10000 only */ +#define _CACHE_CACHABLE_NO_WA (0<<_CACHE_SHIFT) /* R4600 only */ +#define _CACHE_CACHABLE_WA (1<<_CACHE_SHIFT) /* R4600 only */ +#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) /* R4[0246]00 */ +#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT) /* R4[0246]00 */ +#define _CACHE_CACHABLE_CE (4<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_CACHABLE_COHERENT (5<<_CACHE_SHIFT) /* MIPS32R2 CMP */ +#define _CACHE_CACHABLE_CUW (6<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) /* R10000 only */ #endif #define __READABLE (_PAGE_SILENT_READ | _PAGE_ACCESSED | (cpu_has_rixi ? 0 : _PAGE_READ)) #define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) -#define _PAGE_CHG_MASK (_PFN_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) +#define _PAGE_CHG_MASK (_PFN_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) #endif /* _ASM_PGTABLE_BITS_H */ diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index ec50d52..fdc62fb 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -112,7 +112,7 @@ static inline void set_pte(pte_t *ptep, pte_t pte) * it better already be global) */ if (pte_none(*buddy)) { - buddy->pte_low |= _PAGE_GLOBAL; + buddy->pte_low |= _PAGE_GLOBAL; buddy->pte_high |= _PAGE_GLOBAL; } } @@ -319,7 +319,7 @@ static inline int pte_special(pte_t pte) { return 0; } static inline pte_t pte_mkspecial(pte_t pte) { return pte; } /* - * Macro to make mark a page protection value as "uncacheable". Note + * Macro to make mark a page protection value as "uncacheable". Note * that "protection" is really a misnomer here as the protection value * contains the memory attribute bits, dirty bits, and various other * bits as well. diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index bd98b50..2a5fa7a 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -112,8 +112,8 @@ struct mips_fpu_struct { typedef __u32 dspreg_t; struct mips_dsp_state { - dspreg_t dspr[NUM_DSP_REGS]; - unsigned int dspcontrol; + dspreg_t dspr[NUM_DSP_REGS]; + unsigned int dspcontrol; }; #define INIT_CPUMASK { \ @@ -137,46 +137,46 @@ union mips_watch_reg_state { struct octeon_cop2_state { /* DMFC2 rt, 0x0201 */ - unsigned long cop2_crc_iv; + unsigned long cop2_crc_iv; /* DMFC2 rt, 0x0202 (Set with DMTC2 rt, 0x1202) */ - unsigned long cop2_crc_length; + unsigned long cop2_crc_length; /* DMFC2 rt, 0x0200 (set with DMTC2 rt, 0x4200) */ - unsigned long cop2_crc_poly; + unsigned long cop2_crc_poly; /* DMFC2 rt, 0x0402; DMFC2 rt, 0x040A */ - unsigned long cop2_llm_dat[2]; + unsigned long cop2_llm_dat[2]; /* DMFC2 rt, 0x0084 */ - unsigned long cop2_3des_iv; + unsigned long cop2_3des_iv; /* DMFC2 rt, 0x0080; DMFC2 rt, 0x0081; DMFC2 rt, 0x0082 */ - unsigned long cop2_3des_key[3]; + unsigned long cop2_3des_key[3]; /* DMFC2 rt, 0x0088 (Set with DMTC2 rt, 0x0098) */ - unsigned long cop2_3des_result; + unsigned long cop2_3des_result; /* DMFC2 rt, 0x0111 (FIXME: Read Pass1 Errata) */ - unsigned long cop2_aes_inp0; + unsigned long cop2_aes_inp0; /* DMFC2 rt, 0x0102; DMFC2 rt, 0x0103 */ - unsigned long cop2_aes_iv[2]; + unsigned long cop2_aes_iv[2]; /* DMFC2 rt, 0x0104; DMFC2 rt, 0x0105; DMFC2 rt, 0x0106; DMFC2 * rt, 0x0107 */ - unsigned long cop2_aes_key[4]; + unsigned long cop2_aes_key[4]; /* DMFC2 rt, 0x0110 */ - unsigned long cop2_aes_keylen; + unsigned long cop2_aes_keylen; /* DMFC2 rt, 0x0100; DMFC2 rt, 0x0101 */ - unsigned long cop2_aes_result[2]; + unsigned long cop2_aes_result[2]; /* DMFC2 rt, 0x0240; DMFC2 rt, 0x0241; DMFC2 rt, 0x0242; DMFC2 * rt, 0x0243; DMFC2 rt, 0x0244; DMFC2 rt, 0x0245; DMFC2 rt, * 0x0246; DMFC2 rt, 0x0247; DMFC2 rt, 0x0248; DMFC2 rt, * 0x0249; DMFC2 rt, 0x024A; DMFC2 rt, 0x024B; DMFC2 rt, * 0x024C; DMFC2 rt, 0x024D; DMFC2 rt, 0x024E - Pass2 */ - unsigned long cop2_hsh_datw[15]; + unsigned long cop2_hsh_datw[15]; /* DMFC2 rt, 0x0250; DMFC2 rt, 0x0251; DMFC2 rt, 0x0252; DMFC2 * rt, 0x0253; DMFC2 rt, 0x0254; DMFC2 rt, 0x0255; DMFC2 rt, * 0x0256; DMFC2 rt, 0x0257 - Pass2 */ - unsigned long cop2_hsh_ivw[8]; + unsigned long cop2_hsh_ivw[8]; /* DMFC2 rt, 0x0258; DMFC2 rt, 0x0259 - Pass2 */ - unsigned long cop2_gfm_mult[2]; + unsigned long cop2_gfm_mult[2]; /* DMFC2 rt, 0x025E - Pass2 */ - unsigned long cop2_gfm_poly; + unsigned long cop2_gfm_poly; /* DMFC2 rt, 0x025A; DMFC2 rt, 0x025B - Pass2 */ - unsigned long cop2_gfm_result[2]; + unsigned long cop2_gfm_result[2]; }; #define INIT_OCTEON_COP2 {0,} @@ -249,9 +249,9 @@ struct thread_struct { #endif /* CONFIG_CPU_CAVIUM_OCTEON */ #define INIT_THREAD { \ - /* \ - * Saved main processor registers \ - */ \ + /* \ + * Saved main processor registers \ + */ \ .reg16 = 0, \ .reg17 = 0, \ .reg18 = 0, \ @@ -332,7 +332,7 @@ unsigned long get_wchan(struct task_struct *p); * aborts compilation on some CPUs. It's simply not possible to unwind * some CPU's stackframes. * - * __builtin_return_address works only for non-leaf functions. We avoid the + * __builtin_return_address works only for non-leaf functions. We avoid the * overhead of a function call by forcing the compiler to save the return * address register on the stack. */ diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h index 54ea47d..a0b2650 100644 --- a/arch/mips/include/asm/r4kcache.h +++ b/arch/mips/include/asm/r4kcache.h @@ -22,10 +22,10 @@ * for indexed cache operations. Two issues here: * * - The MIPS32 and MIPS64 specs permit an implementation to directly derive - * the index bits from the virtual address. This breaks with tradition - * set by the R4000. To keep unpleasant surprises from happening we pick + * the index bits from the virtual address. This breaks with tradition + * set by the R4000. To keep unpleasant surprises from happening we pick * an address in KSEG0 / CKSEG0. - * - We need a properly sign extended address for 64-bit code. To get away + * - We need a properly sign extended address for 64-bit code. To get away * without ifdefs we let the compiler do it by a type cast. */ #define INDEX_BASE CKSEG0 @@ -347,7 +347,7 @@ static inline void blast_##pfx##cache##lsize(void) \ unsigned long end = start + current_cpu_data.desc.waysize; \ unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \ unsigned long ws_end = current_cpu_data.desc.ways << \ - current_cpu_data.desc.waybit; \ + current_cpu_data.desc.waybit; \ unsigned long ws, addr; \ \ __##pfx##flush_prologue \ @@ -359,7 +359,7 @@ static inline void blast_##pfx##cache##lsize(void) \ __##pfx##flush_epilogue \ } \ \ -static inline void blast_##pfx##cache##lsize##_page(unsigned long page) \ +static inline void blast_##pfx##cache##lsize##_page(unsigned long page) \ { \ unsigned long start = page; \ unsigned long end = page + PAGE_SIZE; \ @@ -381,7 +381,7 @@ static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) unsigned long end = start + PAGE_SIZE; \ unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \ unsigned long ws_end = current_cpu_data.desc.ways << \ - current_cpu_data.desc.waybit; \ + current_cpu_data.desc.waybit; \ unsigned long ws, addr; \ \ __##pfx##flush_prologue \ diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h index 785a518..3c687df 100644 --- a/arch/mips/include/asm/regdef.h +++ b/arch/mips/include/asm/regdef.h @@ -19,44 +19,44 @@ /* * Symbolic register names for 32 bit ABI */ -#define zero $0 /* wired zero */ -#define AT $1 /* assembler temp - uppercase because of ".set at" */ -#define v0 $2 /* return value */ -#define v1 $3 -#define a0 $4 /* argument registers */ -#define a1 $5 -#define a2 $6 -#define a3 $7 -#define t0 $8 /* caller saved */ -#define t1 $9 -#define t2 $10 -#define t3 $11 -#define t4 $12 +#define zero $0 /* wired zero */ +#define AT $1 /* assembler temp - uppercase because of ".set at" */ +#define v0 $2 /* return value */ +#define v1 $3 +#define a0 $4 /* argument registers */ +#define a1 $5 +#define a2 $6 +#define a3 $7 +#define t0 $8 /* caller saved */ +#define t1 $9 +#define t2 $10 +#define t3 $11 +#define t4 $12 #define ta0 $12 -#define t5 $13 +#define t5 $13 #define ta1 $13 -#define t6 $14 +#define t6 $14 #define ta2 $14 -#define t7 $15 +#define t7 $15 #define ta3 $15 -#define s0 $16 /* callee saved */ -#define s1 $17 -#define s2 $18 -#define s3 $19 -#define s4 $20 -#define s5 $21 -#define s6 $22 -#define s7 $23 -#define t8 $24 /* caller saved */ -#define t9 $25 -#define jp $25 /* PIC jump register */ -#define k0 $26 /* kernel scratch */ -#define k1 $27 -#define gp $28 /* global pointer */ -#define sp $29 /* stack pointer */ -#define fp $30 /* frame pointer */ +#define s0 $16 /* callee saved */ +#define s1 $17 +#define s2 $18 +#define s3 $19 +#define s4 $20 +#define s5 $21 +#define s6 $22 +#define s7 $23 +#define t8 $24 /* caller saved */ +#define t9 $25 +#define jp $25 /* PIC jump register */ +#define k0 $26 /* kernel scratch */ +#define k1 $27 +#define gp $28 /* global pointer */ +#define sp $29 /* stack pointer */ +#define fp $30 /* frame pointer */ #define s8 $30 /* same like fp! */ -#define ra $31 /* return address */ +#define ra $31 /* return address */ #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ diff --git a/arch/mips/include/asm/rtlx.h b/arch/mips/include/asm/rtlx.h index 4ca3063..90985b6 100644 --- a/arch/mips/include/asm/rtlx.h +++ b/arch/mips/include/asm/rtlx.h @@ -38,7 +38,7 @@ enum rtlx_state { #define RTLX_BUFFER_SIZE 2048 /* each channel supports read and write. - linux (vpe0) reads lx_buffer and writes rt_buffer + linux (vpe0) reads lx_buffer and writes rt_buffer SP (vpe1) reads rt_buffer and writes lx_buffer */ struct rtlx_channel { diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h index ae6306e..f29c75c 100644 --- a/arch/mips/include/asm/seccomp.h +++ b/arch/mips/include/asm/seccomp.h @@ -10,7 +10,7 @@ /* * Kludge alert: * - * The generic seccomp code currently allows only a single compat ABI. Until + * The generic seccomp code currently allows only a single compat ABI. Until * this is fixed we priorize O32 as the compat ABI over N32. */ #ifdef CONFIG_MIPS32_O32 diff --git a/arch/mips/include/asm/sgi/gio.h b/arch/mips/include/asm/sgi/gio.h index 889cf02..24be2b4 100644 --- a/arch/mips/include/asm/sgi/gio.h +++ b/arch/mips/include/asm/sgi/gio.h @@ -18,18 +18,18 @@ * three physical connectors, but only two slots, GFX and EXP0. * * There is 10MB of GIO address space for GIO64 slot devices - * slot# slot type address range size + * slot# slot type address range size * ----- --------- ----------------------- ----- - * 0 GFX 0x1f000000 - 0x1f3fffff 4MB - * 1 EXP0 0x1f400000 - 0x1f5fffff 2MB - * 2 EXP1 0x1f600000 - 0x1f9fffff 4MB + * 0 GFX 0x1f000000 - 0x1f3fffff 4MB + * 1 EXP0 0x1f400000 - 0x1f5fffff 2MB + * 2 EXP1 0x1f600000 - 0x1f9fffff 4MB * * There are un-slotted devices, HPC, I/O and misc devices, which are grouped * into the HPC address space. - * - MISC 0x1fb00000 - 0x1fbfffff 1MB + * - MISC 0x1fb00000 - 0x1fbfffff 1MB * * Following space is reserved and unused - * - RESERVED 0x18000000 - 0x1effffff 112MB + * - RESERVED 0x18000000 - 0x1effffff 112MB * * GIO bus IDs * @@ -39,10 +39,10 @@ * the slot undefined. * * 32-bit IDs are divided into - * bits 0:6 the product ID; ranges from 0x00 to 0x7F. + * bits 0:6 the product ID; ranges from 0x00 to 0x7F. * bit 7 0=GIO Product ID is 8 bits wide * 1=GIO Product ID is 32 bits wide. - * bits 8:15 manufacturer version for the product. + * bits 8:15 manufacturer version for the product. * bit 16 0=GIO32 and GIO32-bis, 1=GIO64. * bit 17 0=no ROM present * 1=ROM present on this board AND next three words diff --git a/arch/mips/include/asm/sgi/hpc3.h b/arch/mips/include/asm/sgi/hpc3.h index c4729f5..59920b3 100644 --- a/arch/mips/include/asm/sgi/hpc3.h +++ b/arch/mips/include/asm/sgi/hpc3.h @@ -65,39 +65,39 @@ struct hpc3_scsiregs { u32 _unused0[0x1000/4 - 2]; /* padding */ volatile u32 bcd; /* byte count info */ #define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */ -#define HPC3_SBCD_XIE 0x00004000 /* Send IRQ when done with cur buf */ -#define HPC3_SBCD_EOX 0x00008000 /* Indicates this is last buf in chain */ +#define HPC3_SBCD_XIE 0x00004000 /* Send IRQ when done with cur buf */ +#define HPC3_SBCD_EOX 0x00008000 /* Indicates this is last buf in chain */ volatile u32 ctrl; /* control register */ -#define HPC3_SCTRL_IRQ 0x01 /* IRQ asserted, either dma done or parity */ +#define HPC3_SCTRL_IRQ 0x01 /* IRQ asserted, either dma done or parity */ #define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */ -#define HPC3_SCTRL_DIR 0x04 /* DMA direction, 1=dev2mem 0=mem2dev */ +#define HPC3_SCTRL_DIR 0x04 /* DMA direction, 1=dev2mem 0=mem2dev */ #define HPC3_SCTRL_FLUSH 0x08 /* Tells HPC3 to flush scsi fifos */ #define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */ #define HPC3_SCTRL_AMASK 0x20 /* DMA active inhibits PIO */ #define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */ -#define HPC3_SCTRL_PERR 0x80 /* Bad parity on HPC3 iface to scsi controller */ +#define HPC3_SCTRL_PERR 0x80 /* Bad parity on HPC3 iface to scsi controller */ volatile u32 gfptr; /* current GIO fifo ptr */ volatile u32 dfptr; /* current device fifo ptr */ volatile u32 dconfig; /* DMA configuration register */ #define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */ -#define HPC3_SDCFG_D1 0x00006 /* Cycles to spend in D1 state */ -#define HPC3_SDCFG_D2 0x00038 /* Cycles to spend in D2 state */ -#define HPC3_SDCFG_D3 0x001c0 /* Cycles to spend in D3 state */ +#define HPC3_SDCFG_D1 0x00006 /* Cycles to spend in D1 state */ +#define HPC3_SDCFG_D2 0x00038 /* Cycles to spend in D2 state */ +#define HPC3_SDCFG_D3 0x001c0 /* Cycles to spend in D3 state */ #define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */ -#define HPC3_SDCFG_HW 0x01000 /* Enable 16-bit halfword DMA accesses to scsi */ +#define HPC3_SDCFG_HW 0x01000 /* Enable 16-bit halfword DMA accesses to scsi */ #define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */ #define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */ #define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */ #define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */ volatile u32 pconfig; /* PIO configuration register */ -#define HPC3_SPCFG_P3 0x0003 /* Cycles to spend in P3 state */ -#define HPC3_SPCFG_P2W 0x001c /* Cycles to spend in P2 state for writes */ -#define HPC3_SPCFG_P2R 0x01e0 /* Cycles to spend in P2 state for reads */ -#define HPC3_SPCFG_P1 0x0e00 /* Cycles to spend in P1 state */ -#define HPC3_SPCFG_HW 0x1000 /* Enable 16-bit halfword PIO accesses to scsi */ +#define HPC3_SPCFG_P3 0x0003 /* Cycles to spend in P3 state */ +#define HPC3_SPCFG_P2W 0x001c /* Cycles to spend in P2 state for writes */ +#define HPC3_SPCFG_P2R 0x01e0 /* Cycles to spend in P2 state for reads */ +#define HPC3_SPCFG_P1 0x0e00 /* Cycles to spend in P1 state */ +#define HPC3_SPCFG_HW 0x1000 /* Enable 16-bit halfword PIO accesses to scsi */ #define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */ #define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */ #define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */ @@ -108,13 +108,13 @@ struct hpc3_scsiregs { /* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */ struct hpc3_ethregs { /* Receiver registers. */ - volatile u32 rx_cbptr; /* current dma buffer ptr, diagnostic use only */ - volatile u32 rx_ndptr; /* next dma descriptor ptr */ + volatile u32 rx_cbptr; /* current dma buffer ptr, diagnostic use only */ + volatile u32 rx_ndptr; /* next dma descriptor ptr */ u32 _unused0[0x1000/4 - 2]; /* padding */ volatile u32 rx_bcd; /* byte count info */ #define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */ -#define HPC3_ERXBCD_XIE 0x20000000 /* HPC3 interrupts cpu at end of this buf */ -#define HPC3_ERXBCD_EOX 0x80000000 /* flags this as end of descriptor chain */ +#define HPC3_ERXBCD_XIE 0x20000000 /* HPC3 interrupts cpu at end of this buf */ +#define HPC3_ERXBCD_EOX 0x80000000 /* flags this as end of descriptor chain */ volatile u32 rx_ctrl; /* control register */ #define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */ @@ -131,23 +131,23 @@ struct hpc3_ethregs { volatile u32 reset; /* reset register */ #define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */ #define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */ -#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ +#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ - volatile u32 dconfig; /* DMA configuration register */ -#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ -#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ -#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ + volatile u32 dconfig; /* DMA configuration register */ +#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ +#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ +#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ #define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */ #define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */ -#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ -#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ -#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */ +#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ +#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ +#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */ - volatile u32 pconfig; /* PIO configuration register */ -#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ -#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ -#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ -#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ + volatile u32 pconfig; /* PIO configuration register */ +#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ +#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ +#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ +#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ u32 _unused2[0x1000/4 - 8]; /* padding */ @@ -158,9 +158,9 @@ struct hpc3_ethregs { volatile u32 tx_bcd; /* byte count info */ #define HPC3_ETXBCD_BCNTMSK 0x00003fff /* bytes to be read from memory */ #define HPC3_ETXBCD_ESAMP 0x10000000 /* if set, too late to add descriptor */ -#define HPC3_ETXBCD_XIE 0x20000000 /* Interrupt cpu at end of cur desc */ -#define HPC3_ETXBCD_EOP 0x40000000 /* Last byte of cur buf is end of packet */ -#define HPC3_ETXBCD_EOX 0x80000000 /* This buf is the end of desc chain */ +#define HPC3_ETXBCD_XIE 0x20000000 /* Interrupt cpu at end of cur desc */ +#define HPC3_ETXBCD_EOP 0x40000000 /* Last byte of cur buf is end of packet */ +#define HPC3_ETXBCD_EOX 0x80000000 /* This buf is the end of desc chain */ volatile u32 tx_ctrl; /* control register */ #define HPC3_ETXCTRL_STAT30 0x0000000f /* Rdonly copy of seeq tx stat reg */ @@ -215,10 +215,10 @@ struct hpc3_regs { volatile u32 istat1; /* Irq status, only bits <9:5> reliable. */ volatile u32 bestat; /* Bus error interrupt status reg. */ -#define HPC3_BESTAT_BLMASK 0x000ff /* Bus lane where bad parity occurred */ -#define HPC3_BESTAT_CTYPE 0x00100 /* Bus cycle type, 0=PIO 1=DMA */ +#define HPC3_BESTAT_BLMASK 0x000ff /* Bus lane where bad parity occurred */ +#define HPC3_BESTAT_CTYPE 0x00100 /* Bus cycle type, 0=PIO 1=DMA */ #define HPC3_BESTAT_PIDSHIFT 9 -#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */ +#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */ u32 _unused1[0x14000/4 - 5]; /* padding */ @@ -259,7 +259,7 @@ struct hpc3_regs { #define HPC3_DMACFG_RTIME 0x00200000 /* 5 bit burst count for DMA device */ #define HPC3_DMACFG_BURST_MASK 0x07c00000 -#define HPC3_DMACFG_BURST_SHIFT 22 +#define HPC3_DMACFG_BURST_SHIFT 22 /* Use live pbus_dreq unsynchronized signal */ #define HPC3_DMACFG_DRQLIVE 0x08000000 volatile u32 pbus_piocfg[16][64]; @@ -288,20 +288,20 @@ struct hpc3_regs { /* PBUS PROM control regs. */ volatile u32 pbus_promwe; /* PROM write enable register */ -#define HPC3_PROM_WENAB 0x1 /* Enable writes to the PROM */ +#define HPC3_PROM_WENAB 0x1 /* Enable writes to the PROM */ u32 _unused5[0x0800/4 - 1]; volatile u32 pbus_promswap; /* Chip select swap reg */ #define HPC3_PROM_SWAP 0x1 /* invert GIO addr bit to select prom0 or prom1 */ u32 _unused6[0x0800/4 - 1]; - volatile u32 pbus_gout; /* PROM general purpose output reg */ + volatile u32 pbus_gout; /* PROM general purpose output reg */ #define HPC3_PROM_STAT 0x1 /* General purpose status bit in gout */ u32 _unused7[0x1000/4 - 1]; volatile u32 rtcregs[14]; /* Dallas clock registers */ u32 _unused8[50]; - volatile u32 bbram[8192-50-14]; /* Battery backed ram */ + volatile u32 bbram[8192-50-14]; /* Battery backed ram */ }; /* diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h index 380347b..53c6b1c 100644 --- a/arch/mips/include/asm/sgi/ioc.h +++ b/arch/mips/include/asm/sgi/ioc.h @@ -138,7 +138,7 @@ struct sgioc_regs { u8 _sysid[3]; volatile u8 sysid; #define SGIOC_SYSID_FULLHOUSE 0x01 -#define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1) +#define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1) #define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5) u32 _unused2; u8 _read[3]; @@ -150,7 +150,7 @@ struct sgioc_regs { #define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */ #define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */ #define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */ -#define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */ +#define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */ #define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */ u32 _unused4; u8 _reset[3]; diff --git a/arch/mips/include/asm/sgi/ip22.h b/arch/mips/include/asm/sgi/ip22.h index c0501f9..8db1a35 100644 --- a/arch/mips/include/asm/sgi/ip22.h +++ b/arch/mips/include/asm/sgi/ip22.h @@ -38,8 +38,8 @@ #define SGI_SOFT_0_IRQ SGINT_CPU + 0 #define SGI_SOFT_1_IRQ SGINT_CPU + 1 -#define SGI_LOCAL_0_IRQ SGINT_CPU + 2 -#define SGI_LOCAL_1_IRQ SGINT_CPU + 3 +#define SGI_LOCAL_0_IRQ SGINT_CPU + 2 +#define SGI_LOCAL_1_IRQ SGINT_CPU + 3 #define SGI_8254_0_IRQ SGINT_CPU + 4 #define SGI_8254_1_IRQ SGINT_CPU + 5 #define SGI_BUSERR_IRQ SGINT_CPU + 6 @@ -51,7 +51,7 @@ #define SGI_WD93_1_IRQ SGINT_LOCAL0 + 2 /* 2nd onboard WD93 */ #define SGI_ENET_IRQ SGINT_LOCAL0 + 3 /* onboard ethernet */ #define SGI_MCDMA_IRQ SGINT_LOCAL0 + 4 /* MC DMA done */ -#define SGI_PARPORT_IRQ SGINT_LOCAL0 + 5 /* Parallel port */ +#define SGI_PARPORT_IRQ SGINT_LOCAL0 + 5 /* Parallel port */ #define SGI_GIO_1_IRQ SGINT_LOCAL0 + 6 /* GE / GIO-1 / 2nd-HPC */ #define SGI_MAP_0_IRQ SGINT_LOCAL0 + 7 /* Mappable interrupt 0 */ diff --git a/arch/mips/include/asm/sgi/mc.h b/arch/mips/include/asm/sgi/mc.h index 1576c23..3a070ce 100644 --- a/arch/mips/include/asm/sgi/mc.h +++ b/arch/mips/include/asm/sgi/mc.h @@ -29,10 +29,10 @@ struct sgimc_regs { #define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */ #define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */ #define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */ -#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */ +#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */ #define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */ -#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */ -#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */ +#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */ +#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */ #define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */ #define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */ u32 _unused1; @@ -40,13 +40,13 @@ struct sgimc_regs { #define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */ #define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */ #define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */ -#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */ -#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */ -#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */ -#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */ +#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */ +#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */ +#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */ +#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */ u32 _unused2; - volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */ + volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */ u32 _unused3; volatile u32 systemid; /* MC system ID register, readonly */ @@ -81,11 +81,11 @@ struct sgimc_regs { #define SGIMC_GIOPAR_RTIMEGFX 0x00000040 /* GFX device has realtime attr */ #define SGIMC_GIOPAR_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */ #define SGIMC_GIOPAR_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */ -#define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */ +#define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */ #define SGIMC_GIOPAR_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */ #define SGIMC_GIOPAR_MASTERGFX 0x00000800 /* GFX can act as a bus master */ -#define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */ -#define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */ +#define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */ +#define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */ #define SGIMC_GIOPAR_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */ #define SGIMC_GIOPAR_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */ @@ -107,9 +107,9 @@ struct sgimc_regs { #define SGIMC_MCONFIG_SBANKS 0x00004000 /* Number of subbanks */ u32 _unused13; - volatile u32 cmacc; /* Mem access config for CPU */ + volatile u32 cmacc; /* Mem access config for CPU */ u32 _unused14; - volatile u32 gmacc; /* Mem access config for GIO */ + volatile u32 gmacc; /* Mem access config for GIO */ /* This define applies to both cmacc and gmacc registers above. */ #define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */ diff --git a/arch/mips/include/asm/sgi/pi1.h b/arch/mips/include/asm/sgi/pi1.h index c950691..96b1a07 100644 --- a/arch/mips/include/asm/sgi/pi1.h +++ b/arch/mips/include/asm/sgi/pi1.h @@ -28,16 +28,16 @@ struct pi1_regs { #define PI1_STAT_BUSY 0x80 u8 _dmactrl[3]; volatile u8 dmactrl; -#define PI1_DMACTRL_FIFO_EMPTY 0x01 /* fifo empty R/O */ -#define PI1_DMACTRL_ABORT 0x02 /* reset DMA and internal fifo W/O */ -#define PI1_DMACTRL_STDMODE 0x00 /* bits 2-3 */ -#define PI1_DMACTRL_SGIMODE 0x04 /* bits 2-3 */ -#define PI1_DMACTRL_RICOHMODE 0x08 /* bits 2-3 */ -#define PI1_DMACTRL_HPMODE 0x0c /* bits 2-3 */ -#define PI1_DMACTRL_BLKMODE 0x10 /* block mode */ -#define PI1_DMACTRL_FIFO_CLEAR 0x20 /* clear fifo W/O */ -#define PI1_DMACTRL_READ 0x40 /* read */ -#define PI1_DMACTRL_RUN 0x80 /* pedal to the metal */ +#define PI1_DMACTRL_FIFO_EMPTY 0x01 /* fifo empty R/O */ +#define PI1_DMACTRL_ABORT 0x02 /* reset DMA and internal fifo W/O */ +#define PI1_DMACTRL_STDMODE 0x00 /* bits 2-3 */ +#define PI1_DMACTRL_SGIMODE 0x04 /* bits 2-3 */ +#define PI1_DMACTRL_RICOHMODE 0x08 /* bits 2-3 */ +#define PI1_DMACTRL_HPMODE 0x0c /* bits 2-3 */ +#define PI1_DMACTRL_BLKMODE 0x10 /* block mode */ +#define PI1_DMACTRL_FIFO_CLEAR 0x20 /* clear fifo W/O */ +#define PI1_DMACTRL_READ 0x40 /* read */ +#define PI1_DMACTRL_RUN 0x80 /* pedal to the metal */ u8 _intstat[3]; volatile u8 intstat; #define PI1_INTSTAT_ACK 0x04 diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h index f581157..753275a 100644 --- a/arch/mips/include/asm/sgialib.h +++ b/arch/mips/include/asm/sgialib.h @@ -37,7 +37,7 @@ extern char prom_getchar(void); * in chain is CURR is NULL. */ extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr); -#define PROM_NULL_MDESC ((struct linux_mdesc *) 0) +#define PROM_NULL_MDESC ((struct linux_mdesc *) 0) /* Called by prom_init to setup the physical memory pmemblock * array. diff --git a/arch/mips/include/asm/sgiarcs.h b/arch/mips/include/asm/sgiarcs.h index 3dce7c7..26ddfff 100644 --- a/arch/mips/include/asm/sgiarcs.h +++ b/arch/mips/include/asm/sgiarcs.h @@ -16,33 +16,33 @@ #include <asm/fw/arc/types.h> /* Various ARCS error codes. */ -#define PROM_ESUCCESS 0x00 -#define PROM_E2BIG 0x01 -#define PROM_EACCESS 0x02 -#define PROM_EAGAIN 0x03 -#define PROM_EBADF 0x04 -#define PROM_EBUSY 0x05 -#define PROM_EFAULT 0x06 -#define PROM_EINVAL 0x07 -#define PROM_EIO 0x08 -#define PROM_EISDIR 0x09 -#define PROM_EMFILE 0x0a -#define PROM_EMLINK 0x0b -#define PROM_ENAMETOOLONG 0x0c -#define PROM_ENODEV 0x0d -#define PROM_ENOENT 0x0e -#define PROM_ENOEXEC 0x0f -#define PROM_ENOMEM 0x10 -#define PROM_ENOSPC 0x11 -#define PROM_ENOTDIR 0x12 -#define PROM_ENOTTY 0x13 -#define PROM_ENXIO 0x14 -#define PROM_EROFS 0x15 +#define PROM_ESUCCESS 0x00 +#define PROM_E2BIG 0x01 +#define PROM_EACCESS 0x02 +#define PROM_EAGAIN 0x03 +#define PROM_EBADF 0x04 +#define PROM_EBUSY 0x05 +#define PROM_EFAULT 0x06 +#define PROM_EINVAL 0x07 +#define PROM_EIO 0x08 +#define PROM_EISDIR 0x09 +#define PROM_EMFILE 0x0a +#define PROM_EMLINK 0x0b +#define PROM_ENAMETOOLONG 0x0c +#define PROM_ENODEV 0x0d +#define PROM_ENOENT 0x0e +#define PROM_ENOEXEC 0x0f +#define PROM_ENOMEM 0x10 +#define PROM_ENOSPC 0x11 +#define PROM_ENOTDIR 0x12 +#define PROM_ENOTTY 0x13 +#define PROM_ENXIO 0x14 +#define PROM_EROFS 0x15 /* SGI ARCS specific errno's. */ -#define PROM_EADDRNOTAVAIL 0x1f -#define PROM_ETIMEDOUT 0x20 -#define PROM_ECONNABORTED 0x21 -#define PROM_ENOCONNECT 0x22 +#define PROM_EADDRNOTAVAIL 0x1f +#define PROM_ETIMEDOUT 0x20 +#define PROM_ECONNABORTED 0x21 +#define PROM_ENOCONNECT 0x22 /* Device classes, types, and identifiers for prom * device inventory queries. @@ -77,14 +77,14 @@ enum linux_identifier { /* A prom device tree component. */ struct linux_component { - enum linux_devclass class; /* node class */ - enum linux_devtypes type; /* node type */ - enum linux_identifier iflags; /* node flags */ - USHORT vers; /* node version */ - USHORT rev; /* node revision */ - ULONG key; /* completely magic */ - ULONG amask; /* XXX affinity mask??? */ - ULONG cdsize; /* size of configuration data */ + enum linux_devclass class; /* node class */ + enum linux_devtypes type; /* node type */ + enum linux_identifier iflags; /* node flags */ + USHORT vers; /* node version */ + USHORT rev; /* node revision */ + ULONG key; /* completely magic */ + ULONG amask; /* XXX affinity mask??? */ + ULONG cdsize; /* size of configuration data */ ULONG ilen; /* length of string identifier */ _PULONG iname; /* string identifier */ }; @@ -177,13 +177,13 @@ struct linux_finfo { struct linux_bigint end; struct linux_bigint cur; enum linux_devtypes dtype; - unsigned long namelen; - unsigned char attr; - char name[32]; /* XXX imperical, should be define */ + unsigned long namelen; + unsigned char attr; + char name[32]; /* XXX imperical, should be define */ }; /* This describes the vector containing function pointers to the ARC - firmware functions. */ + firmware functions. */ struct linux_romvec { LONG load; /* Load an executable image. */ LONG invoke; /* Invoke a standalong image. */ @@ -244,7 +244,7 @@ struct linux_romvec { */ typedef struct _SYSTEM_PARAMETER_BLOCK { ULONG magic; /* magic cookie */ -#define PROMBLOCK_MAGIC 0x53435241 +#define PROMBLOCK_MAGIC 0x53435241 ULONG len; /* length of parm block */ USHORT ver; /* ARCS firmware version */ @@ -294,16 +294,16 @@ struct linux_cdata { }; /* Common SGI ARCS firmware file descriptors. */ -#define SGIPROM_STDIN 0 -#define SGIPROM_STDOUT 1 +#define SGIPROM_STDIN 0 +#define SGIPROM_STDOUT 1 /* Common SGI ARCS firmware file types. */ -#define SGIPROM_ROFILE 0x01 /* read-only file */ -#define SGIPROM_HFILE 0x02 /* hidden file */ -#define SGIPROM_SFILE 0x04 /* System file */ -#define SGIPROM_AFILE 0x08 /* Archive file */ -#define SGIPROM_DFILE 0x10 /* Directory file */ -#define SGIPROM_DELFILE 0x20 /* Deleted file */ +#define SGIPROM_ROFILE 0x01 /* read-only file */ +#define SGIPROM_HFILE 0x02 /* hidden file */ +#define SGIPROM_SFILE 0x04 /* System file */ +#define SGIPROM_AFILE 0x08 /* Archive file */ +#define SGIPROM_DFILE 0x10 /* Directory file */ +#define SGIPROM_DELFILE 0x20 /* Deleted file */ /* SGI ARCS boot record information. */ struct sgi_partition { @@ -318,7 +318,7 @@ struct sgi_partition { unsigned char tsect0, tsect1, tsect2, tsect3; }; -#define SGIBBLOCK_MAGIC 0xaa55 +#define SGIBBLOCK_MAGIC 0xaa55 #define SGIBBLOCK_MAXPART 0x0004 struct sgi_bootblock { @@ -332,34 +332,34 @@ struct sgi_bparm_block { unsigned short bytes_sect; /* bytes per sector */ unsigned char sect_clust; /* sectors per cluster */ unsigned short sect_resv; /* reserved sectors */ - unsigned char nfats; /* # of allocation tables */ + unsigned char nfats; /* # of allocation tables */ unsigned short nroot_dirents; /* # of root directory entries */ unsigned short sect_volume; /* sectors in volume */ unsigned char media_type; /* media descriptor */ unsigned short sect_fat; /* sectors per allocation table */ unsigned short sect_track; /* sectors per track */ - unsigned short nheads; /* # of heads */ - unsigned short nhsects; /* # of hidden sectors */ + unsigned short nheads; /* # of heads */ + unsigned short nhsects; /* # of hidden sectors */ }; struct sgi_bsector { - unsigned char jmpinfo[3]; - unsigned char manuf_name[8]; + unsigned char jmpinfo[3]; + unsigned char manuf_name[8]; struct sgi_bparm_block info; }; /* Debugging block used with SGI symmon symbolic debugger. */ -#define SMB_DEBUG_MAGIC 0xfeeddead +#define SMB_DEBUG_MAGIC 0xfeeddead struct linux_smonblock { - unsigned long magic; - void (*handler)(void); /* Breakpoint routine. */ - unsigned long dtable_base; /* Base addr of dbg table. */ - int (*printf)(const char *fmt, ...); - unsigned long btable_base; /* Breakpoint table. */ - unsigned long mpflushreqs; /* SMP cache flush request list. */ - unsigned long ntab; /* Name table. */ - unsigned long stab; /* Symbol table. */ - int smax; /* Max # of symbols. */ + unsigned long magic; + void (*handler)(void); /* Breakpoint routine. */ + unsigned long dtable_base; /* Base addr of dbg table. */ + int (*printf)(const char *fmt, ...); + unsigned long btable_base; /* Breakpoint table. */ + unsigned long mpflushreqs; /* SMP cache flush request list. */ + unsigned long ntab; /* Name table. */ + unsigned long stab; /* Symbol table. */ + int smax; /* Max # of symbols. */ }; /* @@ -369,7 +369,7 @@ struct linux_smonblock { #if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32) #define __arc_clobbers \ - "$2", "$3" /* ... */, "$8", "$9", "$10", "$11", \ + "$2", "$3" /* ... */, "$8", "$9", "$10", "$11", \ "$12", "$13", "$14", "$15", "$16", "$24", "$25", "$31" #define ARC_CALL0(dest) \ @@ -447,7 +447,7 @@ struct linux_smonblock { "daddu\t$29, 32\n\t" \ "move\t%0, $2" \ : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), \ + : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), \ "r" (__a4) \ : __arc_clobbers); \ __res; \ @@ -468,8 +468,8 @@ struct linux_smonblock { "daddu\t$29, 32\n\t" \ "move\t%0, $2" \ : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), \ - "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), \ + : "1" (__vec), \ + "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), \ "r" (__a5) \ : __arc_clobbers); \ __res; \ @@ -512,7 +512,7 @@ struct linux_smonblock { long __a1 = (long) (a1); \ long __a2 = (long) (a2); \ long __a3 = (long) (a3); \ - long (*__vec)(long, long, long) = (void *) romvec->dest; \ + long (*__vec)(long, long, long) = (void *) romvec->dest; \ \ __res = __vec(__a1, __a2, __a3); \ __res; \ diff --git a/arch/mips/include/asm/shmparam.h b/arch/mips/include/asm/shmparam.h index 0929072..324d040 100644 --- a/arch/mips/include/asm/shmparam.h +++ b/arch/mips/include/asm/shmparam.h @@ -8,6 +8,6 @@ #define __ARCH_FORCE_SHMLBA 1 -#define SHMLBA 0x40000 /* attach addr a multiple of this */ +#define SHMLBA 0x40000 /* attach addr a multiple of this */ #endif /* _ASM_SHMPARAM_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_int.h b/arch/mips/include/asm/sibyte/bcm1480_int.h index fffb224..6b82ed3 100644 --- a/arch/mips/include/asm/sibyte/bcm1480_int.h +++ b/arch/mips/include/asm/sibyte/bcm1480_int.h @@ -60,253 +60,253 @@ * Interrupt sources (Table 22) */ -#define K_BCM1480_INT_SOURCES 128 +#define K_BCM1480_INT_SOURCES 128 #define _BCM1480_INT_HIGH(k) (k) #define _BCM1480_INT_LOW(k) ((k)+64) -#define K_BCM1480_INT_ADDR_TRAP _BCM1480_INT_HIGH(1) -#define K_BCM1480_INT_GPIO_0 _BCM1480_INT_HIGH(4) -#define K_BCM1480_INT_GPIO_1 _BCM1480_INT_HIGH(5) -#define K_BCM1480_INT_GPIO_2 _BCM1480_INT_HIGH(6) -#define K_BCM1480_INT_GPIO_3 _BCM1480_INT_HIGH(7) -#define K_BCM1480_INT_PCI_INTA _BCM1480_INT_HIGH(8) -#define K_BCM1480_INT_PCI_INTB _BCM1480_INT_HIGH(9) -#define K_BCM1480_INT_PCI_INTC _BCM1480_INT_HIGH(10) -#define K_BCM1480_INT_PCI_INTD _BCM1480_INT_HIGH(11) -#define K_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_HIGH(12) -#define K_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_HIGH(13) -#define K_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_HIGH(14) -#define K_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_HIGH(15) -#define K_BCM1480_INT_TIMER_0 _BCM1480_INT_HIGH(20) -#define K_BCM1480_INT_TIMER_1 _BCM1480_INT_HIGH(21) -#define K_BCM1480_INT_TIMER_2 _BCM1480_INT_HIGH(22) -#define K_BCM1480_INT_TIMER_3 _BCM1480_INT_HIGH(23) -#define K_BCM1480_INT_DM_CH_0 _BCM1480_INT_HIGH(28) -#define K_BCM1480_INT_DM_CH_1 _BCM1480_INT_HIGH(29) -#define K_BCM1480_INT_DM_CH_2 _BCM1480_INT_HIGH(30) -#define K_BCM1480_INT_DM_CH_3 _BCM1480_INT_HIGH(31) -#define K_BCM1480_INT_MAC_0 _BCM1480_INT_HIGH(36) -#define K_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_HIGH(37) -#define K_BCM1480_INT_MAC_1 _BCM1480_INT_HIGH(38) -#define K_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_HIGH(39) -#define K_BCM1480_INT_MAC_2 _BCM1480_INT_HIGH(40) -#define K_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_HIGH(41) -#define K_BCM1480_INT_MAC_3 _BCM1480_INT_HIGH(42) -#define K_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_HIGH(43) -#define K_BCM1480_INT_PMI_LOW _BCM1480_INT_HIGH(52) -#define K_BCM1480_INT_PMI_HIGH _BCM1480_INT_HIGH(53) -#define K_BCM1480_INT_PMO_LOW _BCM1480_INT_HIGH(54) -#define K_BCM1480_INT_PMO_HIGH _BCM1480_INT_HIGH(55) -#define K_BCM1480_INT_MBOX_0_0 _BCM1480_INT_HIGH(56) -#define K_BCM1480_INT_MBOX_0_1 _BCM1480_INT_HIGH(57) -#define K_BCM1480_INT_MBOX_0_2 _BCM1480_INT_HIGH(58) -#define K_BCM1480_INT_MBOX_0_3 _BCM1480_INT_HIGH(59) -#define K_BCM1480_INT_MBOX_1_0 _BCM1480_INT_HIGH(60) -#define K_BCM1480_INT_MBOX_1_1 _BCM1480_INT_HIGH(61) -#define K_BCM1480_INT_MBOX_1_2 _BCM1480_INT_HIGH(62) -#define K_BCM1480_INT_MBOX_1_3 _BCM1480_INT_HIGH(63) +#define K_BCM1480_INT_ADDR_TRAP _BCM1480_INT_HIGH(1) +#define K_BCM1480_INT_GPIO_0 _BCM1480_INT_HIGH(4) +#define K_BCM1480_INT_GPIO_1 _BCM1480_INT_HIGH(5) +#define K_BCM1480_INT_GPIO_2 _BCM1480_INT_HIGH(6) +#define K_BCM1480_INT_GPIO_3 _BCM1480_INT_HIGH(7) +#define K_BCM1480_INT_PCI_INTA _BCM1480_INT_HIGH(8) +#define K_BCM1480_INT_PCI_INTB _BCM1480_INT_HIGH(9) +#define K_BCM1480_INT_PCI_INTC _BCM1480_INT_HIGH(10) +#define K_BCM1480_INT_PCI_INTD _BCM1480_INT_HIGH(11) +#define K_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_HIGH(12) +#define K_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_HIGH(13) +#define K_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_HIGH(14) +#define K_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_HIGH(15) +#define K_BCM1480_INT_TIMER_0 _BCM1480_INT_HIGH(20) +#define K_BCM1480_INT_TIMER_1 _BCM1480_INT_HIGH(21) +#define K_BCM1480_INT_TIMER_2 _BCM1480_INT_HIGH(22) +#define K_BCM1480_INT_TIMER_3 _BCM1480_INT_HIGH(23) +#define K_BCM1480_INT_DM_CH_0 _BCM1480_INT_HIGH(28) +#define K_BCM1480_INT_DM_CH_1 _BCM1480_INT_HIGH(29) +#define K_BCM1480_INT_DM_CH_2 _BCM1480_INT_HIGH(30) +#define K_BCM1480_INT_DM_CH_3 _BCM1480_INT_HIGH(31) +#define K_BCM1480_INT_MAC_0 _BCM1480_INT_HIGH(36) +#define K_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_HIGH(37) +#define K_BCM1480_INT_MAC_1 _BCM1480_INT_HIGH(38) +#define K_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_HIGH(39) +#define K_BCM1480_INT_MAC_2 _BCM1480_INT_HIGH(40) +#define K_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_HIGH(41) +#define K_BCM1480_INT_MAC_3 _BCM1480_INT_HIGH(42) +#define K_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_HIGH(43) +#define K_BCM1480_INT_PMI_LOW _BCM1480_INT_HIGH(52) +#define K_BCM1480_INT_PMI_HIGH _BCM1480_INT_HIGH(53) +#define K_BCM1480_INT_PMO_LOW _BCM1480_INT_HIGH(54) +#define K_BCM1480_INT_PMO_HIGH _BCM1480_INT_HIGH(55) +#define K_BCM1480_INT_MBOX_0_0 _BCM1480_INT_HIGH(56) +#define K_BCM1480_INT_MBOX_0_1 _BCM1480_INT_HIGH(57) +#define K_BCM1480_INT_MBOX_0_2 _BCM1480_INT_HIGH(58) +#define K_BCM1480_INT_MBOX_0_3 _BCM1480_INT_HIGH(59) +#define K_BCM1480_INT_MBOX_1_0 _BCM1480_INT_HIGH(60) +#define K_BCM1480_INT_MBOX_1_1 _BCM1480_INT_HIGH(61) +#define K_BCM1480_INT_MBOX_1_2 _BCM1480_INT_HIGH(62) +#define K_BCM1480_INT_MBOX_1_3 _BCM1480_INT_HIGH(63) -#define K_BCM1480_INT_BAD_ECC _BCM1480_INT_LOW(1) -#define K_BCM1480_INT_COR_ECC _BCM1480_INT_LOW(2) -#define K_BCM1480_INT_IO_BUS _BCM1480_INT_LOW(3) -#define K_BCM1480_INT_PERF_CNT _BCM1480_INT_LOW(4) -#define K_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_LOW(5) -#define K_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_LOW(6) -#define K_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_LOW(7) -#define K_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_LOW(8) -#define K_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_LOW(9) -#define K_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_LOW(10) -#define K_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_LOW(11) -#define K_BCM1480_INT_PCI_ERROR _BCM1480_INT_LOW(16) -#define K_BCM1480_INT_PCI_RESET _BCM1480_INT_LOW(17) -#define K_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_LOW(18) -#define K_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_LOW(19) -#define K_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_LOW(20) -#define K_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_LOW(21) -#define K_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_LOW(22) -#define K_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_LOW(23) -#define K_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_LOW(24) -#define K_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_LOW(25) -#define K_BCM1480_INT_LDT_SMI _BCM1480_INT_LOW(32) -#define K_BCM1480_INT_LDT_NMI _BCM1480_INT_LOW(33) -#define K_BCM1480_INT_LDT_INIT _BCM1480_INT_LOW(34) -#define K_BCM1480_INT_LDT_STARTUP _BCM1480_INT_LOW(35) -#define K_BCM1480_INT_LDT_EXT _BCM1480_INT_LOW(36) -#define K_BCM1480_INT_SMB_0 _BCM1480_INT_LOW(40) -#define K_BCM1480_INT_SMB_1 _BCM1480_INT_LOW(41) -#define K_BCM1480_INT_PCMCIA _BCM1480_INT_LOW(42) -#define K_BCM1480_INT_UART_0 _BCM1480_INT_LOW(44) -#define K_BCM1480_INT_UART_1 _BCM1480_INT_LOW(45) -#define K_BCM1480_INT_UART_2 _BCM1480_INT_LOW(46) -#define K_BCM1480_INT_UART_3 _BCM1480_INT_LOW(47) -#define K_BCM1480_INT_GPIO_4 _BCM1480_INT_LOW(52) -#define K_BCM1480_INT_GPIO_5 _BCM1480_INT_LOW(53) -#define K_BCM1480_INT_GPIO_6 _BCM1480_INT_LOW(54) -#define K_BCM1480_INT_GPIO_7 _BCM1480_INT_LOW(55) -#define K_BCM1480_INT_GPIO_8 _BCM1480_INT_LOW(56) -#define K_BCM1480_INT_GPIO_9 _BCM1480_INT_LOW(57) -#define K_BCM1480_INT_GPIO_10 _BCM1480_INT_LOW(58) -#define K_BCM1480_INT_GPIO_11 _BCM1480_INT_LOW(59) -#define K_BCM1480_INT_GPIO_12 _BCM1480_INT_LOW(60) -#define K_BCM1480_INT_GPIO_13 _BCM1480_INT_LOW(61) -#define K_BCM1480_INT_GPIO_14 _BCM1480_INT_LOW(62) -#define K_BCM1480_INT_GPIO_15 _BCM1480_INT_LOW(63) +#define K_BCM1480_INT_BAD_ECC _BCM1480_INT_LOW(1) +#define K_BCM1480_INT_COR_ECC _BCM1480_INT_LOW(2) +#define K_BCM1480_INT_IO_BUS _BCM1480_INT_LOW(3) +#define K_BCM1480_INT_PERF_CNT _BCM1480_INT_LOW(4) +#define K_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_LOW(5) +#define K_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_LOW(6) +#define K_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_LOW(7) +#define K_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_LOW(8) +#define K_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_LOW(9) +#define K_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_LOW(10) +#define K_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_LOW(11) +#define K_BCM1480_INT_PCI_ERROR _BCM1480_INT_LOW(16) +#define K_BCM1480_INT_PCI_RESET _BCM1480_INT_LOW(17) +#define K_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_LOW(18) +#define K_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_LOW(19) +#define K_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_LOW(20) +#define K_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_LOW(21) +#define K_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_LOW(22) +#define K_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_LOW(23) +#define K_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_LOW(24) +#define K_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_LOW(25) +#define K_BCM1480_INT_LDT_SMI _BCM1480_INT_LOW(32) +#define K_BCM1480_INT_LDT_NMI _BCM1480_INT_LOW(33) +#define K_BCM1480_INT_LDT_INIT _BCM1480_INT_LOW(34) +#define K_BCM1480_INT_LDT_STARTUP _BCM1480_INT_LOW(35) +#define K_BCM1480_INT_LDT_EXT _BCM1480_INT_LOW(36) +#define K_BCM1480_INT_SMB_0 _BCM1480_INT_LOW(40) +#define K_BCM1480_INT_SMB_1 _BCM1480_INT_LOW(41) +#define K_BCM1480_INT_PCMCIA _BCM1480_INT_LOW(42) +#define K_BCM1480_INT_UART_0 _BCM1480_INT_LOW(44) +#define K_BCM1480_INT_UART_1 _BCM1480_INT_LOW(45) +#define K_BCM1480_INT_UART_2 _BCM1480_INT_LOW(46) +#define K_BCM1480_INT_UART_3 _BCM1480_INT_LOW(47) +#define K_BCM1480_INT_GPIO_4 _BCM1480_INT_LOW(52) +#define K_BCM1480_INT_GPIO_5 _BCM1480_INT_LOW(53) +#define K_BCM1480_INT_GPIO_6 _BCM1480_INT_LOW(54) +#define K_BCM1480_INT_GPIO_7 _BCM1480_INT_LOW(55) +#define K_BCM1480_INT_GPIO_8 _BCM1480_INT_LOW(56) +#define K_BCM1480_INT_GPIO_9 _BCM1480_INT_LOW(57) +#define K_BCM1480_INT_GPIO_10 _BCM1480_INT_LOW(58) +#define K_BCM1480_INT_GPIO_11 _BCM1480_INT_LOW(59) +#define K_BCM1480_INT_GPIO_12 _BCM1480_INT_LOW(60) +#define K_BCM1480_INT_GPIO_13 _BCM1480_INT_LOW(61) +#define K_BCM1480_INT_GPIO_14 _BCM1480_INT_LOW(62) +#define K_BCM1480_INT_GPIO_15 _BCM1480_INT_LOW(63) /* * Mask values for each interrupt */ -#define _BCM1480_INT_MASK(w, n) _SB_MAKEMASK(w, ((n) & 0x3F)) -#define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F)) -#define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6) +#define _BCM1480_INT_MASK(w, n) _SB_MAKEMASK(w, ((n) & 0x3F)) +#define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F)) +#define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6) -#define M_BCM1480_INT_CASCADE _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0)) +#define M_BCM1480_INT_CASCADE _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0)) -#define M_BCM1480_INT_ADDR_TRAP _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP) -#define M_BCM1480_INT_GPIO_0 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0) -#define M_BCM1480_INT_GPIO_1 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1) -#define M_BCM1480_INT_GPIO_2 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2) -#define M_BCM1480_INT_GPIO_3 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3) -#define M_BCM1480_INT_PCI_INTA _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA) -#define M_BCM1480_INT_PCI_INTB _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB) -#define M_BCM1480_INT_PCI_INTC _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC) -#define M_BCM1480_INT_PCI_INTD _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD) -#define M_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0) -#define M_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1) -#define M_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2) -#define M_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3) -#define M_BCM1480_INT_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0) -#define M_BCM1480_INT_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1) -#define M_BCM1480_INT_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2) -#define M_BCM1480_INT_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3) -#define M_BCM1480_INT_DM_CH_0 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0) -#define M_BCM1480_INT_DM_CH_1 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1) -#define M_BCM1480_INT_DM_CH_2 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2) -#define M_BCM1480_INT_DM_CH_3 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3) -#define M_BCM1480_INT_MAC_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0) -#define M_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1) -#define M_BCM1480_INT_MAC_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1) -#define M_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1) -#define M_BCM1480_INT_MAC_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2) -#define M_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1) -#define M_BCM1480_INT_MAC_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3) -#define M_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1) -#define M_BCM1480_INT_PMI_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW) -#define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH) -#define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW) -#define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH) -#define M_BCM1480_INT_MBOX_ALL _BCM1480_INT_MASK(8, K_BCM1480_INT_MBOX_0_0) -#define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0) -#define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1) -#define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2) -#define M_BCM1480_INT_MBOX_0_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3) -#define M_BCM1480_INT_MBOX_1_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0) -#define M_BCM1480_INT_MBOX_1_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1) -#define M_BCM1480_INT_MBOX_1_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2) -#define M_BCM1480_INT_MBOX_1_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3) -#define M_BCM1480_INT_BAD_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC) -#define M_BCM1480_INT_COR_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC) -#define M_BCM1480_INT_IO_BUS _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS) -#define M_BCM1480_INT_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT) -#define M_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT) -#define M_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE) -#define M_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE) -#define M_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0) -#define M_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1) -#define M_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2) -#define M_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3) -#define M_BCM1480_INT_PCI_ERROR _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR) -#define M_BCM1480_INT_PCI_RESET _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET) -#define M_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER) -#define M_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE) -#define M_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL) -#define M_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL) -#define M_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL) -#define M_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL) -#define M_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL) -#define M_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL) -#define M_BCM1480_INT_LDT_SMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI) -#define M_BCM1480_INT_LDT_NMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI) -#define M_BCM1480_INT_LDT_INIT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT) -#define M_BCM1480_INT_LDT_STARTUP _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP) -#define M_BCM1480_INT_LDT_EXT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT) -#define M_BCM1480_INT_SMB_0 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0) -#define M_BCM1480_INT_SMB_1 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1) -#define M_BCM1480_INT_PCMCIA _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA) -#define M_BCM1480_INT_UART_0 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0) -#define M_BCM1480_INT_UART_1 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1) -#define M_BCM1480_INT_UART_2 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2) -#define M_BCM1480_INT_UART_3 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3) -#define M_BCM1480_INT_GPIO_4 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4) -#define M_BCM1480_INT_GPIO_5 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5) -#define M_BCM1480_INT_GPIO_6 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6) -#define M_BCM1480_INT_GPIO_7 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7) -#define M_BCM1480_INT_GPIO_8 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8) -#define M_BCM1480_INT_GPIO_9 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9) -#define M_BCM1480_INT_GPIO_10 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10) -#define M_BCM1480_INT_GPIO_11 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11) -#define M_BCM1480_INT_GPIO_12 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12) -#define M_BCM1480_INT_GPIO_13 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13) -#define M_BCM1480_INT_GPIO_14 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14) -#define M_BCM1480_INT_GPIO_15 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15) +#define M_BCM1480_INT_ADDR_TRAP _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP) +#define M_BCM1480_INT_GPIO_0 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0) +#define M_BCM1480_INT_GPIO_1 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1) +#define M_BCM1480_INT_GPIO_2 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2) +#define M_BCM1480_INT_GPIO_3 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3) +#define M_BCM1480_INT_PCI_INTA _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA) +#define M_BCM1480_INT_PCI_INTB _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB) +#define M_BCM1480_INT_PCI_INTC _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC) +#define M_BCM1480_INT_PCI_INTD _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD) +#define M_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0) +#define M_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1) +#define M_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2) +#define M_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3) +#define M_BCM1480_INT_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0) +#define M_BCM1480_INT_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1) +#define M_BCM1480_INT_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2) +#define M_BCM1480_INT_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3) +#define M_BCM1480_INT_DM_CH_0 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0) +#define M_BCM1480_INT_DM_CH_1 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1) +#define M_BCM1480_INT_DM_CH_2 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2) +#define M_BCM1480_INT_DM_CH_3 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3) +#define M_BCM1480_INT_MAC_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0) +#define M_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1) +#define M_BCM1480_INT_MAC_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1) +#define M_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1) +#define M_BCM1480_INT_MAC_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2) +#define M_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1) +#define M_BCM1480_INT_MAC_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3) +#define M_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1) +#define M_BCM1480_INT_PMI_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW) +#define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH) +#define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW) +#define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH) +#define M_BCM1480_INT_MBOX_ALL _BCM1480_INT_MASK(8, K_BCM1480_INT_MBOX_0_0) +#define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0) +#define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1) +#define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2) +#define M_BCM1480_INT_MBOX_0_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3) +#define M_BCM1480_INT_MBOX_1_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0) +#define M_BCM1480_INT_MBOX_1_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1) +#define M_BCM1480_INT_MBOX_1_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2) +#define M_BCM1480_INT_MBOX_1_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3) +#define M_BCM1480_INT_BAD_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC) +#define M_BCM1480_INT_COR_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC) +#define M_BCM1480_INT_IO_BUS _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS) +#define M_BCM1480_INT_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT) +#define M_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT) +#define M_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE) +#define M_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE) +#define M_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0) +#define M_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1) +#define M_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2) +#define M_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3) +#define M_BCM1480_INT_PCI_ERROR _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR) +#define M_BCM1480_INT_PCI_RESET _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET) +#define M_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER) +#define M_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE) +#define M_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL) +#define M_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL) +#define M_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL) +#define M_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL) +#define M_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL) +#define M_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL) +#define M_BCM1480_INT_LDT_SMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI) +#define M_BCM1480_INT_LDT_NMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI) +#define M_BCM1480_INT_LDT_INIT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT) +#define M_BCM1480_INT_LDT_STARTUP _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP) +#define M_BCM1480_INT_LDT_EXT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT) +#define M_BCM1480_INT_SMB_0 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0) +#define M_BCM1480_INT_SMB_1 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1) +#define M_BCM1480_INT_PCMCIA _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA) +#define M_BCM1480_INT_UART_0 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0) +#define M_BCM1480_INT_UART_1 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1) +#define M_BCM1480_INT_UART_2 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2) +#define M_BCM1480_INT_UART_3 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3) +#define M_BCM1480_INT_GPIO_4 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4) +#define M_BCM1480_INT_GPIO_5 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5) +#define M_BCM1480_INT_GPIO_6 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6) +#define M_BCM1480_INT_GPIO_7 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7) +#define M_BCM1480_INT_GPIO_8 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8) +#define M_BCM1480_INT_GPIO_9 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9) +#define M_BCM1480_INT_GPIO_10 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10) +#define M_BCM1480_INT_GPIO_11 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11) +#define M_BCM1480_INT_GPIO_12 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12) +#define M_BCM1480_INT_GPIO_13 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13) +#define M_BCM1480_INT_GPIO_14 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14) +#define M_BCM1480_INT_GPIO_15 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15) /* * Interrupt mappings (Table 18) */ -#define K_BCM1480_INT_MAP_I0 0 /* interrupt pins on processor */ -#define K_BCM1480_INT_MAP_I1 1 -#define K_BCM1480_INT_MAP_I2 2 -#define K_BCM1480_INT_MAP_I3 3 -#define K_BCM1480_INT_MAP_I4 4 -#define K_BCM1480_INT_MAP_I5 5 -#define K_BCM1480_INT_MAP_NMI 6 /* nonmaskable */ -#define K_BCM1480_INT_MAP_DINT 7 /* debug interrupt */ +#define K_BCM1480_INT_MAP_I0 0 /* interrupt pins on processor */ +#define K_BCM1480_INT_MAP_I1 1 +#define K_BCM1480_INT_MAP_I2 2 +#define K_BCM1480_INT_MAP_I3 3 +#define K_BCM1480_INT_MAP_I4 4 +#define K_BCM1480_INT_MAP_I5 5 +#define K_BCM1480_INT_MAP_NMI 6 /* nonmaskable */ +#define K_BCM1480_INT_MAP_DINT 7 /* debug interrupt */ /* * Interrupt LDT Set Register (Table 19) */ -#define S_BCM1480_INT_HT_INTMSG 0 -#define M_BCM1480_INT_HT_INTMSG _SB_MAKEMASK(3, S_BCM1480_INT_HT_INTMSG) -#define V_BCM1480_INT_HT_INTMSG(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTMSG) -#define G_BCM1480_INT_HT_INTMSG(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTMSG, M_BCM1480_INT_HT_INTMSG) +#define S_BCM1480_INT_HT_INTMSG 0 +#define M_BCM1480_INT_HT_INTMSG _SB_MAKEMASK(3, S_BCM1480_INT_HT_INTMSG) +#define V_BCM1480_INT_HT_INTMSG(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTMSG) +#define G_BCM1480_INT_HT_INTMSG(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTMSG, M_BCM1480_INT_HT_INTMSG) -#define K_BCM1480_INT_HT_INTMSG_FIXED 0 +#define K_BCM1480_INT_HT_INTMSG_FIXED 0 #define K_BCM1480_INT_HT_INTMSG_ARBITRATED 1 -#define K_BCM1480_INT_HT_INTMSG_SMI 2 -#define K_BCM1480_INT_HT_INTMSG_NMI 3 -#define K_BCM1480_INT_HT_INTMSG_INIT 4 -#define K_BCM1480_INT_HT_INTMSG_STARTUP 5 -#define K_BCM1480_INT_HT_INTMSG_EXTINT 6 +#define K_BCM1480_INT_HT_INTMSG_SMI 2 +#define K_BCM1480_INT_HT_INTMSG_NMI 3 +#define K_BCM1480_INT_HT_INTMSG_INIT 4 +#define K_BCM1480_INT_HT_INTMSG_STARTUP 5 +#define K_BCM1480_INT_HT_INTMSG_EXTINT 6 #define K_BCM1480_INT_HT_INTMSG_RESERVED 7 -#define M_BCM1480_INT_HT_TRIGGERMODE _SB_MAKEMASK1(3) -#define V_BCM1480_INT_HT_EDGETRIGGER 0 -#define V_BCM1480_INT_HT_LEVELTRIGGER M_BCM1480_INT_HT_TRIGGERMODE +#define M_BCM1480_INT_HT_TRIGGERMODE _SB_MAKEMASK1(3) +#define V_BCM1480_INT_HT_EDGETRIGGER 0 +#define V_BCM1480_INT_HT_LEVELTRIGGER M_BCM1480_INT_HT_TRIGGERMODE -#define M_BCM1480_INT_HT_DESTMODE _SB_MAKEMASK1(4) -#define V_BCM1480_INT_HT_PHYSICALDEST 0 -#define V_BCM1480_INT_HT_LOGICALDEST M_BCM1480_INT_HT_DESTMODE +#define M_BCM1480_INT_HT_DESTMODE _SB_MAKEMASK1(4) +#define V_BCM1480_INT_HT_PHYSICALDEST 0 +#define V_BCM1480_INT_HT_LOGICALDEST M_BCM1480_INT_HT_DESTMODE -#define S_BCM1480_INT_HT_INTDEST 5 -#define M_BCM1480_INT_HT_INTDEST _SB_MAKEMASK(8, S_BCM1480_INT_HT_INTDEST) -#define V_BCM1480_INT_HT_INTDEST(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTDEST) -#define G_BCM1480_INT_HT_INTDEST(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTDEST, M_BCM1480_INT_HT_INTDEST) +#define S_BCM1480_INT_HT_INTDEST 5 +#define M_BCM1480_INT_HT_INTDEST _SB_MAKEMASK(8, S_BCM1480_INT_HT_INTDEST) +#define V_BCM1480_INT_HT_INTDEST(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTDEST) +#define G_BCM1480_INT_HT_INTDEST(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTDEST, M_BCM1480_INT_HT_INTDEST) -#define S_BCM1480_INT_HT_VECTOR 13 -#define M_BCM1480_INT_HT_VECTOR _SB_MAKEMASK(8, S_BCM1480_INT_HT_VECTOR) -#define V_BCM1480_INT_HT_VECTOR(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_VECTOR) -#define G_BCM1480_INT_HT_VECTOR(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_VECTOR, M_BCM1480_INT_HT_VECTOR) +#define S_BCM1480_INT_HT_VECTOR 13 +#define M_BCM1480_INT_HT_VECTOR _SB_MAKEMASK(8, S_BCM1480_INT_HT_VECTOR) +#define V_BCM1480_INT_HT_VECTOR(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_VECTOR) +#define G_BCM1480_INT_HT_VECTOR(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_VECTOR, M_BCM1480_INT_HT_VECTOR) /* * Vector prefix (Table 4-7) */ #define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH 0x00 -#define M_BCM1480_HTVECT_RAISE_MBOX_0 0x40 +#define M_BCM1480_HTVECT_RAISE_MBOX_0 0x40 #define M_BCM1480_HTVECT_RAISE_INTLDT_LO 0x80 -#define M_BCM1480_HTVECT_RAISE_MBOX_1 0xC0 +#define M_BCM1480_HTVECT_RAISE_MBOX_1 0xC0 #endif /* _BCM1480_INT_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_l2c.h b/arch/mips/include/asm/sibyte/bcm1480_l2c.h index 725d38c..910e5c7 100644 --- a/arch/mips/include/asm/sibyte/bcm1480_l2c.h +++ b/arch/mips/include/asm/sibyte/bcm1480_l2c.h @@ -39,120 +39,120 @@ * Format of level 2 cache management address (Table 55) */ -#define S_BCM1480_L2C_MGMT_INDEX 5 -#define M_BCM1480_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_MGMT_INDEX) -#define V_BCM1480_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_INDEX) -#define G_BCM1480_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_INDEX, M_BCM1480_L2C_MGMT_INDEX) +#define S_BCM1480_L2C_MGMT_INDEX 5 +#define M_BCM1480_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_MGMT_INDEX) +#define V_BCM1480_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_INDEX) +#define G_BCM1480_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_INDEX, M_BCM1480_L2C_MGMT_INDEX) -#define S_BCM1480_L2C_MGMT_WAY 17 -#define M_BCM1480_L2C_MGMT_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_MGMT_WAY) -#define V_BCM1480_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_WAY) -#define G_BCM1480_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_WAY, M_BCM1480_L2C_MGMT_WAY) +#define S_BCM1480_L2C_MGMT_WAY 17 +#define M_BCM1480_L2C_MGMT_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_MGMT_WAY) +#define V_BCM1480_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_WAY) +#define G_BCM1480_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_WAY, M_BCM1480_L2C_MGMT_WAY) -#define M_BCM1480_L2C_MGMT_DIRTY _SB_MAKEMASK1(20) -#define M_BCM1480_L2C_MGMT_VALID _SB_MAKEMASK1(21) +#define M_BCM1480_L2C_MGMT_DIRTY _SB_MAKEMASK1(20) +#define M_BCM1480_L2C_MGMT_VALID _SB_MAKEMASK1(21) -#define S_BCM1480_L2C_MGMT_ECC_DIAG 22 -#define M_BCM1480_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_BCM1480_L2C_MGMT_ECC_DIAG) -#define V_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG) -#define G_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG, M_BCM1480_L2C_MGMT_ECC_DIAG) +#define S_BCM1480_L2C_MGMT_ECC_DIAG 22 +#define M_BCM1480_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_BCM1480_L2C_MGMT_ECC_DIAG) +#define V_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG) +#define G_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG, M_BCM1480_L2C_MGMT_ECC_DIAG) -#define A_BCM1480_L2C_MGMT_TAG_BASE 0x00D0000000 +#define A_BCM1480_L2C_MGMT_TAG_BASE 0x00D0000000 -#define BCM1480_L2C_ENTRIES_PER_WAY 4096 -#define BCM1480_L2C_NUM_WAYS 8 +#define BCM1480_L2C_ENTRIES_PER_WAY 4096 +#define BCM1480_L2C_NUM_WAYS 8 /* * Level 2 Cache Tag register (Table 59) */ -#define S_BCM1480_L2C_TAG_MBZ 0 -#define M_BCM1480_L2C_TAG_MBZ _SB_MAKEMASK(5, S_BCM1480_L2C_TAG_MBZ) +#define S_BCM1480_L2C_TAG_MBZ 0 +#define M_BCM1480_L2C_TAG_MBZ _SB_MAKEMASK(5, S_BCM1480_L2C_TAG_MBZ) -#define S_BCM1480_L2C_TAG_INDEX 5 -#define M_BCM1480_L2C_TAG_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_TAG_INDEX) -#define V_BCM1480_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_INDEX) -#define G_BCM1480_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_INDEX, M_BCM1480_L2C_TAG_INDEX) +#define S_BCM1480_L2C_TAG_INDEX 5 +#define M_BCM1480_L2C_TAG_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_TAG_INDEX) +#define V_BCM1480_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_INDEX) +#define G_BCM1480_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_INDEX, M_BCM1480_L2C_TAG_INDEX) /* Note that index bit 16 is also tag bit 40 */ -#define S_BCM1480_L2C_TAG_TAG 17 -#define M_BCM1480_L2C_TAG_TAG _SB_MAKEMASK(23, S_BCM1480_L2C_TAG_TAG) -#define V_BCM1480_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_TAG) -#define G_BCM1480_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_TAG, M_BCM1480_L2C_TAG_TAG) +#define S_BCM1480_L2C_TAG_TAG 17 +#define M_BCM1480_L2C_TAG_TAG _SB_MAKEMASK(23, S_BCM1480_L2C_TAG_TAG) +#define V_BCM1480_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_TAG) +#define G_BCM1480_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_TAG, M_BCM1480_L2C_TAG_TAG) -#define S_BCM1480_L2C_TAG_ECC 40 -#define M_BCM1480_L2C_TAG_ECC _SB_MAKEMASK(6, S_BCM1480_L2C_TAG_ECC) -#define V_BCM1480_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_ECC) -#define G_BCM1480_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_ECC, M_BCM1480_L2C_TAG_ECC) +#define S_BCM1480_L2C_TAG_ECC 40 +#define M_BCM1480_L2C_TAG_ECC _SB_MAKEMASK(6, S_BCM1480_L2C_TAG_ECC) +#define V_BCM1480_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_ECC) +#define G_BCM1480_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_ECC, M_BCM1480_L2C_TAG_ECC) -#define S_BCM1480_L2C_TAG_WAY 46 -#define M_BCM1480_L2C_TAG_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_TAG_WAY) -#define V_BCM1480_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_WAY) -#define G_BCM1480_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_WAY, M_BCM1480_L2C_TAG_WAY) +#define S_BCM1480_L2C_TAG_WAY 46 +#define M_BCM1480_L2C_TAG_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_TAG_WAY) +#define V_BCM1480_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_WAY) +#define G_BCM1480_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_WAY, M_BCM1480_L2C_TAG_WAY) -#define M_BCM1480_L2C_TAG_DIRTY _SB_MAKEMASK1(49) -#define M_BCM1480_L2C_TAG_VALID _SB_MAKEMASK1(50) +#define M_BCM1480_L2C_TAG_DIRTY _SB_MAKEMASK1(49) +#define M_BCM1480_L2C_TAG_VALID _SB_MAKEMASK1(50) -#define S_BCM1480_L2C_DATA_ECC 51 -#define M_BCM1480_L2C_DATA_ECC _SB_MAKEMASK(10, S_BCM1480_L2C_DATA_ECC) -#define V_BCM1480_L2C_DATA_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_DATA_ECC) -#define G_BCM1480_L2C_DATA_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_DATA_ECC, M_BCM1480_L2C_DATA_ECC) +#define S_BCM1480_L2C_DATA_ECC 51 +#define M_BCM1480_L2C_DATA_ECC _SB_MAKEMASK(10, S_BCM1480_L2C_DATA_ECC) +#define V_BCM1480_L2C_DATA_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_DATA_ECC) +#define G_BCM1480_L2C_DATA_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_DATA_ECC, M_BCM1480_L2C_DATA_ECC) /* * L2 Misc0 Value Register (Table 60) */ -#define S_BCM1480_L2C_MISC0_WAY_REMOTE 0 -#define M_BCM1480_L2C_MISC0_WAY_REMOTE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_REMOTE) +#define S_BCM1480_L2C_MISC0_WAY_REMOTE 0 +#define M_BCM1480_L2C_MISC0_WAY_REMOTE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_REMOTE) #define G_BCM1480_L2C_MISC0_WAY_REMOTE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_REMOTE, M_BCM1480_L2C_MISC0_WAY_REMOTE) -#define S_BCM1480_L2C_MISC0_WAY_LOCAL 8 -#define M_BCM1480_L2C_MISC0_WAY_LOCAL _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_LOCAL) +#define S_BCM1480_L2C_MISC0_WAY_LOCAL 8 +#define M_BCM1480_L2C_MISC0_WAY_LOCAL _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_LOCAL) #define G_BCM1480_L2C_MISC0_WAY_LOCAL(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_LOCAL, M_BCM1480_L2C_MISC0_WAY_LOCAL) -#define S_BCM1480_L2C_MISC0_WAY_ENABLE 16 -#define M_BCM1480_L2C_MISC0_WAY_ENABLE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_ENABLE) +#define S_BCM1480_L2C_MISC0_WAY_ENABLE 16 +#define M_BCM1480_L2C_MISC0_WAY_ENABLE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_ENABLE) #define G_BCM1480_L2C_MISC0_WAY_ENABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_ENABLE, M_BCM1480_L2C_MISC0_WAY_ENABLE) #define S_BCM1480_L2C_MISC0_CACHE_DISABLE 24 #define M_BCM1480_L2C_MISC0_CACHE_DISABLE _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_DISABLE) #define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_DISABLE, M_BCM1480_L2C_MISC0_CACHE_DISABLE) -#define S_BCM1480_L2C_MISC0_CACHE_QUAD 26 -#define M_BCM1480_L2C_MISC0_CACHE_QUAD _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_QUAD) +#define S_BCM1480_L2C_MISC0_CACHE_QUAD 26 +#define M_BCM1480_L2C_MISC0_CACHE_QUAD _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_QUAD) #define G_BCM1480_L2C_MISC0_CACHE_QUAD(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_QUAD, M_BCM1480_L2C_MISC0_CACHE_QUAD) -#define S_BCM1480_L2C_MISC0_MC_PRIORITY 30 -#define M_BCM1480_L2C_MISC0_MC_PRIORITY _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY) +#define S_BCM1480_L2C_MISC0_MC_PRIORITY 30 +#define M_BCM1480_L2C_MISC0_MC_PRIORITY _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY) -#define S_BCM1480_L2C_MISC0_ECC_CLEANUP 31 -#define M_BCM1480_L2C_MISC0_ECC_CLEANUP _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP) +#define S_BCM1480_L2C_MISC0_ECC_CLEANUP 31 +#define M_BCM1480_L2C_MISC0_ECC_CLEANUP _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP) /* * L2 Misc1 Value Register (Table 60) */ -#define S_BCM1480_L2C_MISC1_WAY_AGENT_0 0 -#define M_BCM1480_L2C_MISC1_WAY_AGENT_0 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_0) +#define S_BCM1480_L2C_MISC1_WAY_AGENT_0 0 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_0 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_0) #define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_0, M_BCM1480_L2C_MISC1_WAY_AGENT_0) -#define S_BCM1480_L2C_MISC1_WAY_AGENT_1 8 -#define M_BCM1480_L2C_MISC1_WAY_AGENT_1 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_1) +#define S_BCM1480_L2C_MISC1_WAY_AGENT_1 8 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_1 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_1) #define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_1, M_BCM1480_L2C_MISC1_WAY_AGENT_1) -#define S_BCM1480_L2C_MISC1_WAY_AGENT_2 16 -#define M_BCM1480_L2C_MISC1_WAY_AGENT_2 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_2) +#define S_BCM1480_L2C_MISC1_WAY_AGENT_2 16 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_2 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_2) #define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_2, M_BCM1480_L2C_MISC1_WAY_AGENT_2) -#define S_BCM1480_L2C_MISC1_WAY_AGENT_3 24 -#define M_BCM1480_L2C_MISC1_WAY_AGENT_3 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_3) +#define S_BCM1480_L2C_MISC1_WAY_AGENT_3 24 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_3 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_3) #define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_3, M_BCM1480_L2C_MISC1_WAY_AGENT_3) -#define S_BCM1480_L2C_MISC1_WAY_AGENT_4 32 -#define M_BCM1480_L2C_MISC1_WAY_AGENT_4 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_4) +#define S_BCM1480_L2C_MISC1_WAY_AGENT_4 32 +#define M_BCM1480_L2C_MISC1_WAY_AGENT_4 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_4) #define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_4, M_BCM1480_L2C_MISC1_WAY_AGENT_4) @@ -160,16 +160,16 @@ * L2 Misc2 Value Register (Table 60) */ -#define S_BCM1480_L2C_MISC2_WAY_AGENT_8 0 -#define M_BCM1480_L2C_MISC2_WAY_AGENT_8 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_8) +#define S_BCM1480_L2C_MISC2_WAY_AGENT_8 0 +#define M_BCM1480_L2C_MISC2_WAY_AGENT_8 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_8) #define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_8, M_BCM1480_L2C_MISC2_WAY_AGENT_8) -#define S_BCM1480_L2C_MISC2_WAY_AGENT_9 8 -#define M_BCM1480_L2C_MISC2_WAY_AGENT_9 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_9) +#define S_BCM1480_L2C_MISC2_WAY_AGENT_9 8 +#define M_BCM1480_L2C_MISC2_WAY_AGENT_9 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_9) #define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_9, M_BCM1480_L2C_MISC2_WAY_AGENT_9) -#define S_BCM1480_L2C_MISC2_WAY_AGENT_A 16 -#define M_BCM1480_L2C_MISC2_WAY_AGENT_A _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_A) +#define S_BCM1480_L2C_MISC2_WAY_AGENT_A 16 +#define M_BCM1480_L2C_MISC2_WAY_AGENT_A _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_A) #define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_A, M_BCM1480_L2C_MISC2_WAY_AGENT_A) diff --git a/arch/mips/include/asm/sibyte/bcm1480_mc.h b/arch/mips/include/asm/sibyte/bcm1480_mc.h index 4307a75..86908fd 100644 --- a/arch/mips/include/asm/sibyte/bcm1480_mc.h +++ b/arch/mips/include/asm/sibyte/bcm1480_mc.h @@ -1,7 +1,7 @@ /* ********************************************************************* * BCM1280/BCM1480 Board Support Package * - * Memory Controller constants File: bcm1480_mc.h + * Memory Controller constants File: bcm1480_mc.h * * This module contains constants and macros useful for * programming the memory controller. @@ -39,33 +39,33 @@ * Memory Channel Configuration Register (Table 81) */ -#define S_BCM1480_MC_INTLV0 0 -#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0) -#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0) -#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0) -#define V_BCM1480_MC_INTLV0_DEFAULT V_BCM1480_MC_INTLV0(0) - -#define S_BCM1480_MC_INTLV1 8 -#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1) -#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1) -#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1) -#define V_BCM1480_MC_INTLV1_DEFAULT V_BCM1480_MC_INTLV1(0) - -#define S_BCM1480_MC_INTLV2 16 -#define M_BCM1480_MC_INTLV2 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV2) -#define V_BCM1480_MC_INTLV2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV2) -#define G_BCM1480_MC_INTLV2(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV2, M_BCM1480_MC_INTLV2) -#define V_BCM1480_MC_INTLV2_DEFAULT V_BCM1480_MC_INTLV2(0) - -#define S_BCM1480_MC_CS_MODE 32 -#define M_BCM1480_MC_CS_MODE _SB_MAKEMASK(8, S_BCM1480_MC_CS_MODE) -#define V_BCM1480_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS_MODE) -#define G_BCM1480_MC_CS_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_CS_MODE, M_BCM1480_MC_CS_MODE) -#define V_BCM1480_MC_CS_MODE_DEFAULT V_BCM1480_MC_CS_MODE(0) - -#define V_BCM1480_MC_CONFIG_DEFAULT (V_BCM1480_MC_INTLV0_DEFAULT | \ - V_BCM1480_MC_INTLV1_DEFAULT | \ - V_BCM1480_MC_INTLV2_DEFAULT | \ +#define S_BCM1480_MC_INTLV0 0 +#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0) +#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0) +#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0) +#define V_BCM1480_MC_INTLV0_DEFAULT V_BCM1480_MC_INTLV0(0) + +#define S_BCM1480_MC_INTLV1 8 +#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1) +#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1) +#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1) +#define V_BCM1480_MC_INTLV1_DEFAULT V_BCM1480_MC_INTLV1(0) + +#define S_BCM1480_MC_INTLV2 16 +#define M_BCM1480_MC_INTLV2 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV2) +#define V_BCM1480_MC_INTLV2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV2) +#define G_BCM1480_MC_INTLV2(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV2, M_BCM1480_MC_INTLV2) +#define V_BCM1480_MC_INTLV2_DEFAULT V_BCM1480_MC_INTLV2(0) + +#define S_BCM1480_MC_CS_MODE 32 +#define M_BCM1480_MC_CS_MODE _SB_MAKEMASK(8, S_BCM1480_MC_CS_MODE) +#define V_BCM1480_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS_MODE) +#define G_BCM1480_MC_CS_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_CS_MODE, M_BCM1480_MC_CS_MODE) +#define V_BCM1480_MC_CS_MODE_DEFAULT V_BCM1480_MC_CS_MODE(0) + +#define V_BCM1480_MC_CONFIG_DEFAULT (V_BCM1480_MC_INTLV0_DEFAULT | \ + V_BCM1480_MC_INTLV1_DEFAULT | \ + V_BCM1480_MC_INTLV2_DEFAULT | \ V_BCM1480_MC_CS_MODE_DEFAULT) #define K_BCM1480_MC_CS01_MODE 0x03 @@ -80,254 +80,254 @@ * Chip Select Start Address Register (Table 82) */ -#define S_BCM1480_MC_CS0_START 0 -#define M_BCM1480_MC_CS0_START _SB_MAKEMASK(12, S_BCM1480_MC_CS0_START) -#define V_BCM1480_MC_CS0_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_START) -#define G_BCM1480_MC_CS0_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_START, M_BCM1480_MC_CS0_START) +#define S_BCM1480_MC_CS0_START 0 +#define M_BCM1480_MC_CS0_START _SB_MAKEMASK(12, S_BCM1480_MC_CS0_START) +#define V_BCM1480_MC_CS0_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_START) +#define G_BCM1480_MC_CS0_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_START, M_BCM1480_MC_CS0_START) -#define S_BCM1480_MC_CS1_START 16 -#define M_BCM1480_MC_CS1_START _SB_MAKEMASK(12, S_BCM1480_MC_CS1_START) -#define V_BCM1480_MC_CS1_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_START) -#define G_BCM1480_MC_CS1_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_START, M_BCM1480_MC_CS1_START) +#define S_BCM1480_MC_CS1_START 16 +#define M_BCM1480_MC_CS1_START _SB_MAKEMASK(12, S_BCM1480_MC_CS1_START) +#define V_BCM1480_MC_CS1_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_START) +#define G_BCM1480_MC_CS1_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_START, M_BCM1480_MC_CS1_START) -#define S_BCM1480_MC_CS2_START 32 -#define M_BCM1480_MC_CS2_START _SB_MAKEMASK(12, S_BCM1480_MC_CS2_START) -#define V_BCM1480_MC_CS2_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_START) -#define G_BCM1480_MC_CS2_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_START, M_BCM1480_MC_CS2_START) +#define S_BCM1480_MC_CS2_START 32 +#define M_BCM1480_MC_CS2_START _SB_MAKEMASK(12, S_BCM1480_MC_CS2_START) +#define V_BCM1480_MC_CS2_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_START) +#define G_BCM1480_MC_CS2_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_START, M_BCM1480_MC_CS2_START) -#define S_BCM1480_MC_CS3_START 48 -#define M_BCM1480_MC_CS3_START _SB_MAKEMASK(12, S_BCM1480_MC_CS3_START) -#define V_BCM1480_MC_CS3_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_START) -#define G_BCM1480_MC_CS3_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_START, M_BCM1480_MC_CS3_START) +#define S_BCM1480_MC_CS3_START 48 +#define M_BCM1480_MC_CS3_START _SB_MAKEMASK(12, S_BCM1480_MC_CS3_START) +#define V_BCM1480_MC_CS3_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_START) +#define G_BCM1480_MC_CS3_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_START, M_BCM1480_MC_CS3_START) /* * Chip Select End Address Register (Table 83) */ -#define S_BCM1480_MC_CS0_END 0 -#define M_BCM1480_MC_CS0_END _SB_MAKEMASK(12, S_BCM1480_MC_CS0_END) -#define V_BCM1480_MC_CS0_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_END) -#define G_BCM1480_MC_CS0_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_END, M_BCM1480_MC_CS0_END) +#define S_BCM1480_MC_CS0_END 0 +#define M_BCM1480_MC_CS0_END _SB_MAKEMASK(12, S_BCM1480_MC_CS0_END) +#define V_BCM1480_MC_CS0_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_END) +#define G_BCM1480_MC_CS0_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_END, M_BCM1480_MC_CS0_END) -#define S_BCM1480_MC_CS1_END 16 -#define M_BCM1480_MC_CS1_END _SB_MAKEMASK(12, S_BCM1480_MC_CS1_END) -#define V_BCM1480_MC_CS1_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_END) -#define G_BCM1480_MC_CS1_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_END, M_BCM1480_MC_CS1_END) +#define S_BCM1480_MC_CS1_END 16 +#define M_BCM1480_MC_CS1_END _SB_MAKEMASK(12, S_BCM1480_MC_CS1_END) +#define V_BCM1480_MC_CS1_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_END) +#define G_BCM1480_MC_CS1_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_END, M_BCM1480_MC_CS1_END) -#define S_BCM1480_MC_CS2_END 32 -#define M_BCM1480_MC_CS2_END _SB_MAKEMASK(12, S_BCM1480_MC_CS2_END) -#define V_BCM1480_MC_CS2_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_END) -#define G_BCM1480_MC_CS2_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_END, M_BCM1480_MC_CS2_END) +#define S_BCM1480_MC_CS2_END 32 +#define M_BCM1480_MC_CS2_END _SB_MAKEMASK(12, S_BCM1480_MC_CS2_END) +#define V_BCM1480_MC_CS2_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_END) +#define G_BCM1480_MC_CS2_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_END, M_BCM1480_MC_CS2_END) -#define S_BCM1480_MC_CS3_END 48 -#define M_BCM1480_MC_CS3_END _SB_MAKEMASK(12, S_BCM1480_MC_CS3_END) -#define V_BCM1480_MC_CS3_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_END) -#define G_BCM1480_MC_CS3_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_END, M_BCM1480_MC_CS3_END) +#define S_BCM1480_MC_CS3_END 48 +#define M_BCM1480_MC_CS3_END _SB_MAKEMASK(12, S_BCM1480_MC_CS3_END) +#define V_BCM1480_MC_CS3_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_END) +#define G_BCM1480_MC_CS3_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_END, M_BCM1480_MC_CS3_END) /* * Row Address Bit Select Register 0 (Table 84) */ -#define S_BCM1480_MC_ROW00 0 -#define M_BCM1480_MC_ROW00 _SB_MAKEMASK(6, S_BCM1480_MC_ROW00) -#define V_BCM1480_MC_ROW00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW00) -#define G_BCM1480_MC_ROW00(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW00, M_BCM1480_MC_ROW00) - -#define S_BCM1480_MC_ROW01 8 -#define M_BCM1480_MC_ROW01 _SB_MAKEMASK(6, S_BCM1480_MC_ROW01) -#define V_BCM1480_MC_ROW01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW01) -#define G_BCM1480_MC_ROW01(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW01, M_BCM1480_MC_ROW01) - -#define S_BCM1480_MC_ROW02 16 -#define M_BCM1480_MC_ROW02 _SB_MAKEMASK(6, S_BCM1480_MC_ROW02) -#define V_BCM1480_MC_ROW02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW02) -#define G_BCM1480_MC_ROW02(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW02, M_BCM1480_MC_ROW02) - -#define S_BCM1480_MC_ROW03 24 -#define M_BCM1480_MC_ROW03 _SB_MAKEMASK(6, S_BCM1480_MC_ROW03) -#define V_BCM1480_MC_ROW03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW03) -#define G_BCM1480_MC_ROW03(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW03, M_BCM1480_MC_ROW03) - -#define S_BCM1480_MC_ROW04 32 -#define M_BCM1480_MC_ROW04 _SB_MAKEMASK(6, S_BCM1480_MC_ROW04) -#define V_BCM1480_MC_ROW04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW04) -#define G_BCM1480_MC_ROW04(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW04, M_BCM1480_MC_ROW04) - -#define S_BCM1480_MC_ROW05 40 -#define M_BCM1480_MC_ROW05 _SB_MAKEMASK(6, S_BCM1480_MC_ROW05) -#define V_BCM1480_MC_ROW05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW05) -#define G_BCM1480_MC_ROW05(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW05, M_BCM1480_MC_ROW05) - -#define S_BCM1480_MC_ROW06 48 -#define M_BCM1480_MC_ROW06 _SB_MAKEMASK(6, S_BCM1480_MC_ROW06) -#define V_BCM1480_MC_ROW06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW06) -#define G_BCM1480_MC_ROW06(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW06, M_BCM1480_MC_ROW06) - -#define S_BCM1480_MC_ROW07 56 -#define M_BCM1480_MC_ROW07 _SB_MAKEMASK(6, S_BCM1480_MC_ROW07) -#define V_BCM1480_MC_ROW07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW07) -#define G_BCM1480_MC_ROW07(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW07, M_BCM1480_MC_ROW07) +#define S_BCM1480_MC_ROW00 0 +#define M_BCM1480_MC_ROW00 _SB_MAKEMASK(6, S_BCM1480_MC_ROW00) +#define V_BCM1480_MC_ROW00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW00) +#define G_BCM1480_MC_ROW00(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW00, M_BCM1480_MC_ROW00) + +#define S_BCM1480_MC_ROW01 8 +#define M_BCM1480_MC_ROW01 _SB_MAKEMASK(6, S_BCM1480_MC_ROW01) +#define V_BCM1480_MC_ROW01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW01) +#define G_BCM1480_MC_ROW01(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW01, M_BCM1480_MC_ROW01) + +#define S_BCM1480_MC_ROW02 16 +#define M_BCM1480_MC_ROW02 _SB_MAKEMASK(6, S_BCM1480_MC_ROW02) +#define V_BCM1480_MC_ROW02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW02) +#define G_BCM1480_MC_ROW02(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW02, M_BCM1480_MC_ROW02) + +#define S_BCM1480_MC_ROW03 24 +#define M_BCM1480_MC_ROW03 _SB_MAKEMASK(6, S_BCM1480_MC_ROW03) +#define V_BCM1480_MC_ROW03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW03) +#define G_BCM1480_MC_ROW03(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW03, M_BCM1480_MC_ROW03) + +#define S_BCM1480_MC_ROW04 32 +#define M_BCM1480_MC_ROW04 _SB_MAKEMASK(6, S_BCM1480_MC_ROW04) +#define V_BCM1480_MC_ROW04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW04) +#define G_BCM1480_MC_ROW04(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW04, M_BCM1480_MC_ROW04) + +#define S_BCM1480_MC_ROW05 40 +#define M_BCM1480_MC_ROW05 _SB_MAKEMASK(6, S_BCM1480_MC_ROW05) +#define V_BCM1480_MC_ROW05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW05) +#define G_BCM1480_MC_ROW05(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW05, M_BCM1480_MC_ROW05) + +#define S_BCM1480_MC_ROW06 48 +#define M_BCM1480_MC_ROW06 _SB_MAKEMASK(6, S_BCM1480_MC_ROW06) +#define V_BCM1480_MC_ROW06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW06) +#define G_BCM1480_MC_ROW06(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW06, M_BCM1480_MC_ROW06) + +#define S_BCM1480_MC_ROW07 56 +#define M_BCM1480_MC_ROW07 _SB_MAKEMASK(6, S_BCM1480_MC_ROW07) +#define V_BCM1480_MC_ROW07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW07) +#define G_BCM1480_MC_ROW07(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW07, M_BCM1480_MC_ROW07) /* * Row Address Bit Select Register 1 (Table 85) */ -#define S_BCM1480_MC_ROW08 0 -#define M_BCM1480_MC_ROW08 _SB_MAKEMASK(6, S_BCM1480_MC_ROW08) -#define V_BCM1480_MC_ROW08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW08) -#define G_BCM1480_MC_ROW08(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW08, M_BCM1480_MC_ROW08) +#define S_BCM1480_MC_ROW08 0 +#define M_BCM1480_MC_ROW08 _SB_MAKEMASK(6, S_BCM1480_MC_ROW08) +#define V_BCM1480_MC_ROW08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW08) +#define G_BCM1480_MC_ROW08(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW08, M_BCM1480_MC_ROW08) -#define S_BCM1480_MC_ROW09 8 -#define M_BCM1480_MC_ROW09 _SB_MAKEMASK(6, S_BCM1480_MC_ROW09) -#define V_BCM1480_MC_ROW09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW09) -#define G_BCM1480_MC_ROW09(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW09, M_BCM1480_MC_ROW09) +#define S_BCM1480_MC_ROW09 8 +#define M_BCM1480_MC_ROW09 _SB_MAKEMASK(6, S_BCM1480_MC_ROW09) +#define V_BCM1480_MC_ROW09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW09) +#define G_BCM1480_MC_ROW09(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW09, M_BCM1480_MC_ROW09) -#define S_BCM1480_MC_ROW10 16 -#define M_BCM1480_MC_ROW10 _SB_MAKEMASK(6, S_BCM1480_MC_ROW10) -#define V_BCM1480_MC_ROW10(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW10) -#define G_BCM1480_MC_ROW10(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW10, M_BCM1480_MC_ROW10) +#define S_BCM1480_MC_ROW10 16 +#define M_BCM1480_MC_ROW10 _SB_MAKEMASK(6, S_BCM1480_MC_ROW10) +#define V_BCM1480_MC_ROW10(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW10) +#define G_BCM1480_MC_ROW10(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW10, M_BCM1480_MC_ROW10) -#define S_BCM1480_MC_ROW11 24 -#define M_BCM1480_MC_ROW11 _SB_MAKEMASK(6, S_BCM1480_MC_ROW11) -#define V_BCM1480_MC_ROW11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW11) -#define G_BCM1480_MC_ROW11(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW11, M_BCM1480_MC_ROW11) +#define S_BCM1480_MC_ROW11 24 +#define M_BCM1480_MC_ROW11 _SB_MAKEMASK(6, S_BCM1480_MC_ROW11) +#define V_BCM1480_MC_ROW11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW11) +#define G_BCM1480_MC_ROW11(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW11, M_BCM1480_MC_ROW11) -#define S_BCM1480_MC_ROW12 32 -#define M_BCM1480_MC_ROW12 _SB_MAKEMASK(6, S_BCM1480_MC_ROW12) -#define V_BCM1480_MC_ROW12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW12) -#define G_BCM1480_MC_ROW12(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW12, M_BCM1480_MC_ROW12) +#define S_BCM1480_MC_ROW12 32 +#define M_BCM1480_MC_ROW12 _SB_MAKEMASK(6, S_BCM1480_MC_ROW12) +#define V_BCM1480_MC_ROW12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW12) +#define G_BCM1480_MC_ROW12(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW12, M_BCM1480_MC_ROW12) -#define S_BCM1480_MC_ROW13 40 -#define M_BCM1480_MC_ROW13 _SB_MAKEMASK(6, S_BCM1480_MC_ROW13) -#define V_BCM1480_MC_ROW13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW13) -#define G_BCM1480_MC_ROW13(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW13, M_BCM1480_MC_ROW13) +#define S_BCM1480_MC_ROW13 40 +#define M_BCM1480_MC_ROW13 _SB_MAKEMASK(6, S_BCM1480_MC_ROW13) +#define V_BCM1480_MC_ROW13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW13) +#define G_BCM1480_MC_ROW13(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW13, M_BCM1480_MC_ROW13) -#define S_BCM1480_MC_ROW14 48 -#define M_BCM1480_MC_ROW14 _SB_MAKEMASK(6, S_BCM1480_MC_ROW14) -#define V_BCM1480_MC_ROW14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW14) -#define G_BCM1480_MC_ROW14(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW14, M_BCM1480_MC_ROW14) +#define S_BCM1480_MC_ROW14 48 +#define M_BCM1480_MC_ROW14 _SB_MAKEMASK(6, S_BCM1480_MC_ROW14) +#define V_BCM1480_MC_ROW14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW14) +#define G_BCM1480_MC_ROW14(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW14, M_BCM1480_MC_ROW14) -#define K_BCM1480_MC_ROWX_BIT_SPACING 8 +#define K_BCM1480_MC_ROWX_BIT_SPACING 8 /* * Column Address Bit Select Register 0 (Table 86) */ -#define S_BCM1480_MC_COL00 0 -#define M_BCM1480_MC_COL00 _SB_MAKEMASK(6, S_BCM1480_MC_COL00) -#define V_BCM1480_MC_COL00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL00) -#define G_BCM1480_MC_COL00(x) _SB_GETVALUE(x, S_BCM1480_MC_COL00, M_BCM1480_MC_COL00) - -#define S_BCM1480_MC_COL01 8 -#define M_BCM1480_MC_COL01 _SB_MAKEMASK(6, S_BCM1480_MC_COL01) -#define V_BCM1480_MC_COL01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL01) -#define G_BCM1480_MC_COL01(x) _SB_GETVALUE(x, S_BCM1480_MC_COL01, M_BCM1480_MC_COL01) - -#define S_BCM1480_MC_COL02 16 -#define M_BCM1480_MC_COL02 _SB_MAKEMASK(6, S_BCM1480_MC_COL02) -#define V_BCM1480_MC_COL02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL02) -#define G_BCM1480_MC_COL02(x) _SB_GETVALUE(x, S_BCM1480_MC_COL02, M_BCM1480_MC_COL02) - -#define S_BCM1480_MC_COL03 24 -#define M_BCM1480_MC_COL03 _SB_MAKEMASK(6, S_BCM1480_MC_COL03) -#define V_BCM1480_MC_COL03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL03) -#define G_BCM1480_MC_COL03(x) _SB_GETVALUE(x, S_BCM1480_MC_COL03, M_BCM1480_MC_COL03) - -#define S_BCM1480_MC_COL04 32 -#define M_BCM1480_MC_COL04 _SB_MAKEMASK(6, S_BCM1480_MC_COL04) -#define V_BCM1480_MC_COL04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL04) -#define G_BCM1480_MC_COL04(x) _SB_GETVALUE(x, S_BCM1480_MC_COL04, M_BCM1480_MC_COL04) - -#define S_BCM1480_MC_COL05 40 -#define M_BCM1480_MC_COL05 _SB_MAKEMASK(6, S_BCM1480_MC_COL05) -#define V_BCM1480_MC_COL05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL05) -#define G_BCM1480_MC_COL05(x) _SB_GETVALUE(x, S_BCM1480_MC_COL05, M_BCM1480_MC_COL05) - -#define S_BCM1480_MC_COL06 48 -#define M_BCM1480_MC_COL06 _SB_MAKEMASK(6, S_BCM1480_MC_COL06) -#define V_BCM1480_MC_COL06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL06) -#define G_BCM1480_MC_COL06(x) _SB_GETVALUE(x, S_BCM1480_MC_COL06, M_BCM1480_MC_COL06) - -#define S_BCM1480_MC_COL07 56 -#define M_BCM1480_MC_COL07 _SB_MAKEMASK(6, S_BCM1480_MC_COL07) -#define V_BCM1480_MC_COL07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL07) -#define G_BCM1480_MC_COL07(x) _SB_GETVALUE(x, S_BCM1480_MC_COL07, M_BCM1480_MC_COL07) +#define S_BCM1480_MC_COL00 0 +#define M_BCM1480_MC_COL00 _SB_MAKEMASK(6, S_BCM1480_MC_COL00) +#define V_BCM1480_MC_COL00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL00) +#define G_BCM1480_MC_COL00(x) _SB_GETVALUE(x, S_BCM1480_MC_COL00, M_BCM1480_MC_COL00) + +#define S_BCM1480_MC_COL01 8 +#define M_BCM1480_MC_COL01 _SB_MAKEMASK(6, S_BCM1480_MC_COL01) +#define V_BCM1480_MC_COL01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL01) +#define G_BCM1480_MC_COL01(x) _SB_GETVALUE(x, S_BCM1480_MC_COL01, M_BCM1480_MC_COL01) + +#define S_BCM1480_MC_COL02 16 +#define M_BCM1480_MC_COL02 _SB_MAKEMASK(6, S_BCM1480_MC_COL02) +#define V_BCM1480_MC_COL02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL02) +#define G_BCM1480_MC_COL02(x) _SB_GETVALUE(x, S_BCM1480_MC_COL02, M_BCM1480_MC_COL02) + +#define S_BCM1480_MC_COL03 24 +#define M_BCM1480_MC_COL03 _SB_MAKEMASK(6, S_BCM1480_MC_COL03) +#define V_BCM1480_MC_COL03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL03) +#define G_BCM1480_MC_COL03(x) _SB_GETVALUE(x, S_BCM1480_MC_COL03, M_BCM1480_MC_COL03) + +#define S_BCM1480_MC_COL04 32 +#define M_BCM1480_MC_COL04 _SB_MAKEMASK(6, S_BCM1480_MC_COL04) +#define V_BCM1480_MC_COL04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL04) +#define G_BCM1480_MC_COL04(x) _SB_GETVALUE(x, S_BCM1480_MC_COL04, M_BCM1480_MC_COL04) + +#define S_BCM1480_MC_COL05 40 +#define M_BCM1480_MC_COL05 _SB_MAKEMASK(6, S_BCM1480_MC_COL05) +#define V_BCM1480_MC_COL05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL05) +#define G_BCM1480_MC_COL05(x) _SB_GETVALUE(x, S_BCM1480_MC_COL05, M_BCM1480_MC_COL05) + +#define S_BCM1480_MC_COL06 48 +#define M_BCM1480_MC_COL06 _SB_MAKEMASK(6, S_BCM1480_MC_COL06) +#define V_BCM1480_MC_COL06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL06) +#define G_BCM1480_MC_COL06(x) _SB_GETVALUE(x, S_BCM1480_MC_COL06, M_BCM1480_MC_COL06) + +#define S_BCM1480_MC_COL07 56 +#define M_BCM1480_MC_COL07 _SB_MAKEMASK(6, S_BCM1480_MC_COL07) +#define V_BCM1480_MC_COL07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL07) +#define G_BCM1480_MC_COL07(x) _SB_GETVALUE(x, S_BCM1480_MC_COL07, M_BCM1480_MC_COL07) /* * Column Address Bit Select Register 1 (Table 87) */ -#define S_BCM1480_MC_COL08 0 -#define M_BCM1480_MC_COL08 _SB_MAKEMASK(6, S_BCM1480_MC_COL08) -#define V_BCM1480_MC_COL08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL08) -#define G_BCM1480_MC_COL08(x) _SB_GETVALUE(x, S_BCM1480_MC_COL08, M_BCM1480_MC_COL08) +#define S_BCM1480_MC_COL08 0 +#define M_BCM1480_MC_COL08 _SB_MAKEMASK(6, S_BCM1480_MC_COL08) +#define V_BCM1480_MC_COL08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL08) +#define G_BCM1480_MC_COL08(x) _SB_GETVALUE(x, S_BCM1480_MC_COL08, M_BCM1480_MC_COL08) -#define S_BCM1480_MC_COL09 8 -#define M_BCM1480_MC_COL09 _SB_MAKEMASK(6, S_BCM1480_MC_COL09) -#define V_BCM1480_MC_COL09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL09) -#define G_BCM1480_MC_COL09(x) _SB_GETVALUE(x, S_BCM1480_MC_COL09, M_BCM1480_MC_COL09) +#define S_BCM1480_MC_COL09 8 +#define M_BCM1480_MC_COL09 _SB_MAKEMASK(6, S_BCM1480_MC_COL09) +#define V_BCM1480_MC_COL09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL09) +#define G_BCM1480_MC_COL09(x) _SB_GETVALUE(x, S_BCM1480_MC_COL09, M_BCM1480_MC_COL09) -#define S_BCM1480_MC_COL10 16 /* not a valid position, must be prog as 0 */ +#define S_BCM1480_MC_COL10 16 /* not a valid position, must be prog as 0 */ -#define S_BCM1480_MC_COL11 24 -#define M_BCM1480_MC_COL11 _SB_MAKEMASK(6, S_BCM1480_MC_COL11) -#define V_BCM1480_MC_COL11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL11) -#define G_BCM1480_MC_COL11(x) _SB_GETVALUE(x, S_BCM1480_MC_COL11, M_BCM1480_MC_COL11) +#define S_BCM1480_MC_COL11 24 +#define M_BCM1480_MC_COL11 _SB_MAKEMASK(6, S_BCM1480_MC_COL11) +#define V_BCM1480_MC_COL11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL11) +#define G_BCM1480_MC_COL11(x) _SB_GETVALUE(x, S_BCM1480_MC_COL11, M_BCM1480_MC_COL11) -#define S_BCM1480_MC_COL12 32 -#define M_BCM1480_MC_COL12 _SB_MAKEMASK(6, S_BCM1480_MC_COL12) -#define V_BCM1480_MC_COL12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL12) -#define G_BCM1480_MC_COL12(x) _SB_GETVALUE(x, S_BCM1480_MC_COL12, M_BCM1480_MC_COL12) +#define S_BCM1480_MC_COL12 32 +#define M_BCM1480_MC_COL12 _SB_MAKEMASK(6, S_BCM1480_MC_COL12) +#define V_BCM1480_MC_COL12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL12) +#define G_BCM1480_MC_COL12(x) _SB_GETVALUE(x, S_BCM1480_MC_COL12, M_BCM1480_MC_COL12) -#define S_BCM1480_MC_COL13 40 -#define M_BCM1480_MC_COL13 _SB_MAKEMASK(6, S_BCM1480_MC_COL13) -#define V_BCM1480_MC_COL13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL13) -#define G_BCM1480_MC_COL13(x) _SB_GETVALUE(x, S_BCM1480_MC_COL13, M_BCM1480_MC_COL13) +#define S_BCM1480_MC_COL13 40 +#define M_BCM1480_MC_COL13 _SB_MAKEMASK(6, S_BCM1480_MC_COL13) +#define V_BCM1480_MC_COL13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL13) +#define G_BCM1480_MC_COL13(x) _SB_GETVALUE(x, S_BCM1480_MC_COL13, M_BCM1480_MC_COL13) -#define S_BCM1480_MC_COL14 48 -#define M_BCM1480_MC_COL14 _SB_MAKEMASK(6, S_BCM1480_MC_COL14) -#define V_BCM1480_MC_COL14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL14) -#define G_BCM1480_MC_COL14(x) _SB_GETVALUE(x, S_BCM1480_MC_COL14, M_BCM1480_MC_COL14) +#define S_BCM1480_MC_COL14 48 +#define M_BCM1480_MC_COL14 _SB_MAKEMASK(6, S_BCM1480_MC_COL14) +#define V_BCM1480_MC_COL14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL14) +#define G_BCM1480_MC_COL14(x) _SB_GETVALUE(x, S_BCM1480_MC_COL14, M_BCM1480_MC_COL14) -#define K_BCM1480_MC_COLX_BIT_SPACING 8 +#define K_BCM1480_MC_COLX_BIT_SPACING 8 /* * CS0 and CS1 Bank Address Bit Select Register (Table 88) */ -#define S_BCM1480_MC_CS01_BANK0 0 -#define M_BCM1480_MC_CS01_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK0) -#define V_BCM1480_MC_CS01_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK0) -#define G_BCM1480_MC_CS01_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK0, M_BCM1480_MC_CS01_BANK0) +#define S_BCM1480_MC_CS01_BANK0 0 +#define M_BCM1480_MC_CS01_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK0) +#define V_BCM1480_MC_CS01_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK0) +#define G_BCM1480_MC_CS01_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK0, M_BCM1480_MC_CS01_BANK0) -#define S_BCM1480_MC_CS01_BANK1 8 -#define M_BCM1480_MC_CS01_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK1) -#define V_BCM1480_MC_CS01_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK1) -#define G_BCM1480_MC_CS01_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK1, M_BCM1480_MC_CS01_BANK1) +#define S_BCM1480_MC_CS01_BANK1 8 +#define M_BCM1480_MC_CS01_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK1) +#define V_BCM1480_MC_CS01_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK1) +#define G_BCM1480_MC_CS01_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK1, M_BCM1480_MC_CS01_BANK1) -#define S_BCM1480_MC_CS01_BANK2 16 -#define M_BCM1480_MC_CS01_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK2) -#define V_BCM1480_MC_CS01_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK2) -#define G_BCM1480_MC_CS01_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK2, M_BCM1480_MC_CS01_BANK2) +#define S_BCM1480_MC_CS01_BANK2 16 +#define M_BCM1480_MC_CS01_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK2) +#define V_BCM1480_MC_CS01_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK2) +#define G_BCM1480_MC_CS01_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK2, M_BCM1480_MC_CS01_BANK2) /* * CS2 and CS3 Bank Address Bit Select Register (Table 89) */ -#define S_BCM1480_MC_CS23_BANK0 0 -#define M_BCM1480_MC_CS23_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK0) -#define V_BCM1480_MC_CS23_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK0) -#define G_BCM1480_MC_CS23_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK0, M_BCM1480_MC_CS23_BANK0) +#define S_BCM1480_MC_CS23_BANK0 0 +#define M_BCM1480_MC_CS23_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK0) +#define V_BCM1480_MC_CS23_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK0) +#define G_BCM1480_MC_CS23_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK0, M_BCM1480_MC_CS23_BANK0) -#define S_BCM1480_MC_CS23_BANK1 8 -#define M_BCM1480_MC_CS23_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK1) -#define V_BCM1480_MC_CS23_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK1) -#define G_BCM1480_MC_CS23_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK1, M_BCM1480_MC_CS23_BANK1) +#define S_BCM1480_MC_CS23_BANK1 8 +#define M_BCM1480_MC_CS23_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK1) +#define V_BCM1480_MC_CS23_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK1) +#define G_BCM1480_MC_CS23_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK1, M_BCM1480_MC_CS23_BANK1) -#define S_BCM1480_MC_CS23_BANK2 16 -#define M_BCM1480_MC_CS23_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK2) -#define V_BCM1480_MC_CS23_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK2) -#define G_BCM1480_MC_CS23_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK2, M_BCM1480_MC_CS23_BANK2) +#define S_BCM1480_MC_CS23_BANK2 16 +#define M_BCM1480_MC_CS23_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK2) +#define V_BCM1480_MC_CS23_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK2) +#define G_BCM1480_MC_CS23_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK2, M_BCM1480_MC_CS23_BANK2) #define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING 8 @@ -335,19 +335,19 @@ * DRAM Command Register (Table 90) */ -#define S_BCM1480_MC_COMMAND 0 -#define M_BCM1480_MC_COMMAND _SB_MAKEMASK(4, S_BCM1480_MC_COMMAND) -#define V_BCM1480_MC_COMMAND(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COMMAND) -#define G_BCM1480_MC_COMMAND(x) _SB_GETVALUE(x, S_BCM1480_MC_COMMAND, M_BCM1480_MC_COMMAND) +#define S_BCM1480_MC_COMMAND 0 +#define M_BCM1480_MC_COMMAND _SB_MAKEMASK(4, S_BCM1480_MC_COMMAND) +#define V_BCM1480_MC_COMMAND(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COMMAND) +#define G_BCM1480_MC_COMMAND(x) _SB_GETVALUE(x, S_BCM1480_MC_COMMAND, M_BCM1480_MC_COMMAND) -#define K_BCM1480_MC_COMMAND_EMRS 0 -#define K_BCM1480_MC_COMMAND_MRS 1 -#define K_BCM1480_MC_COMMAND_PRE 2 -#define K_BCM1480_MC_COMMAND_AR 3 -#define K_BCM1480_MC_COMMAND_SETRFSH 4 -#define K_BCM1480_MC_COMMAND_CLRRFSH 5 -#define K_BCM1480_MC_COMMAND_SETPWRDN 6 -#define K_BCM1480_MC_COMMAND_CLRPWRDN 7 +#define K_BCM1480_MC_COMMAND_EMRS 0 +#define K_BCM1480_MC_COMMAND_MRS 1 +#define K_BCM1480_MC_COMMAND_PRE 2 +#define K_BCM1480_MC_COMMAND_AR 3 +#define K_BCM1480_MC_COMMAND_SETRFSH 4 +#define K_BCM1480_MC_COMMAND_CLRRFSH 5 +#define K_BCM1480_MC_COMMAND_SETPWRDN 6 +#define K_BCM1480_MC_COMMAND_CLRPWRDN 7 #if SIBYTE_HDR_FEATURE(1480, PASS2) #define K_BCM1480_MC_COMMAND_EMRS2 8 @@ -356,61 +356,61 @@ #define K_BCM1480_MC_COMMAND_DISABLE_MCLK 11 #endif -#define V_BCM1480_MC_COMMAND_EMRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS) -#define V_BCM1480_MC_COMMAND_MRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS) -#define V_BCM1480_MC_COMMAND_PRE V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE) -#define V_BCM1480_MC_COMMAND_AR V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR) -#define V_BCM1480_MC_COMMAND_SETRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH) -#define V_BCM1480_MC_COMMAND_CLRRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH) -#define V_BCM1480_MC_COMMAND_SETPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN) -#define V_BCM1480_MC_COMMAND_CLRPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN) +#define V_BCM1480_MC_COMMAND_EMRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS) +#define V_BCM1480_MC_COMMAND_MRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS) +#define V_BCM1480_MC_COMMAND_PRE V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE) +#define V_BCM1480_MC_COMMAND_AR V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR) +#define V_BCM1480_MC_COMMAND_SETRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH) +#define V_BCM1480_MC_COMMAND_CLRRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH) +#define V_BCM1480_MC_COMMAND_SETPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN) +#define V_BCM1480_MC_COMMAND_CLRPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN) #if SIBYTE_HDR_FEATURE(1480, PASS2) -#define V_BCM1480_MC_COMMAND_EMRS2 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2) -#define V_BCM1480_MC_COMMAND_EMRS3 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3) +#define V_BCM1480_MC_COMMAND_EMRS2 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2) +#define V_BCM1480_MC_COMMAND_EMRS3 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3) #define V_BCM1480_MC_COMMAND_ENABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK) #define V_BCM1480_MC_COMMAND_DISABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK) #endif #define S_BCM1480_MC_CS0 4 -#define M_BCM1480_MC_CS0 _SB_MAKEMASK1(4) -#define M_BCM1480_MC_CS1 _SB_MAKEMASK1(5) -#define M_BCM1480_MC_CS2 _SB_MAKEMASK1(6) -#define M_BCM1480_MC_CS3 _SB_MAKEMASK1(7) -#define M_BCM1480_MC_CS4 _SB_MAKEMASK1(8) -#define M_BCM1480_MC_CS5 _SB_MAKEMASK1(9) -#define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10) -#define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11) +#define M_BCM1480_MC_CS0 _SB_MAKEMASK1(4) +#define M_BCM1480_MC_CS1 _SB_MAKEMASK1(5) +#define M_BCM1480_MC_CS2 _SB_MAKEMASK1(6) +#define M_BCM1480_MC_CS3 _SB_MAKEMASK1(7) +#define M_BCM1480_MC_CS4 _SB_MAKEMASK1(8) +#define M_BCM1480_MC_CS5 _SB_MAKEMASK1(9) +#define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10) +#define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11) -#define M_BCM1480_MC_CS _SB_MAKEMASK(8, S_BCM1480_MC_CS0) -#define V_BCM1480_MC_CS(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0) -#define G_BCM1480_MC_CS(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0, M_BCM1480_MC_CS0) +#define M_BCM1480_MC_CS _SB_MAKEMASK(8, S_BCM1480_MC_CS0) +#define V_BCM1480_MC_CS(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0) +#define G_BCM1480_MC_CS(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0, M_BCM1480_MC_CS0) -#define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16) +#define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16) /* * DRAM Mode Register (Table 91) */ -#define S_BCM1480_MC_EMODE 0 -#define M_BCM1480_MC_EMODE _SB_MAKEMASK(15, S_BCM1480_MC_EMODE) -#define V_BCM1480_MC_EMODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_EMODE) -#define G_BCM1480_MC_EMODE(x) _SB_GETVALUE(x, S_BCM1480_MC_EMODE, M_BCM1480_MC_EMODE) -#define V_BCM1480_MC_EMODE_DEFAULT V_BCM1480_MC_EMODE(0) +#define S_BCM1480_MC_EMODE 0 +#define M_BCM1480_MC_EMODE _SB_MAKEMASK(15, S_BCM1480_MC_EMODE) +#define V_BCM1480_MC_EMODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_EMODE) +#define G_BCM1480_MC_EMODE(x) _SB_GETVALUE(x, S_BCM1480_MC_EMODE, M_BCM1480_MC_EMODE) +#define V_BCM1480_MC_EMODE_DEFAULT V_BCM1480_MC_EMODE(0) -#define S_BCM1480_MC_MODE 16 -#define M_BCM1480_MC_MODE _SB_MAKEMASK(15, S_BCM1480_MC_MODE) -#define V_BCM1480_MC_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MODE) -#define G_BCM1480_MC_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_MODE, M_BCM1480_MC_MODE) -#define V_BCM1480_MC_MODE_DEFAULT V_BCM1480_MC_MODE(0) +#define S_BCM1480_MC_MODE 16 +#define M_BCM1480_MC_MODE _SB_MAKEMASK(15, S_BCM1480_MC_MODE) +#define V_BCM1480_MC_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MODE) +#define G_BCM1480_MC_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_MODE, M_BCM1480_MC_MODE) +#define V_BCM1480_MC_MODE_DEFAULT V_BCM1480_MC_MODE(0) -#define S_BCM1480_MC_DRAM_TYPE 32 -#define M_BCM1480_MC_DRAM_TYPE _SB_MAKEMASK(4, S_BCM1480_MC_DRAM_TYPE) -#define V_BCM1480_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DRAM_TYPE) -#define G_BCM1480_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_BCM1480_MC_DRAM_TYPE, M_BCM1480_MC_DRAM_TYPE) +#define S_BCM1480_MC_DRAM_TYPE 32 +#define M_BCM1480_MC_DRAM_TYPE _SB_MAKEMASK(4, S_BCM1480_MC_DRAM_TYPE) +#define V_BCM1480_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DRAM_TYPE) +#define G_BCM1480_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_BCM1480_MC_DRAM_TYPE, M_BCM1480_MC_DRAM_TYPE) -#define K_BCM1480_MC_DRAM_TYPE_JEDEC 0 -#define K_BCM1480_MC_DRAM_TYPE_FCRAM 1 +#define K_BCM1480_MC_DRAM_TYPE_JEDEC 0 +#define K_BCM1480_MC_DRAM_TYPE_FCRAM 1 #if SIBYTE_HDR_FEATURE(1480, PASS2) #define K_BCM1480_MC_DRAM_TYPE_DDR2 2 @@ -418,27 +418,27 @@ #define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1 0 -#define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC) -#define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM) +#define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC) +#define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM) #if SIBYTE_HDR_FEATURE(1480, PASS2) #define V_BCM1480_MC_DRAM_TYPE_DDR2 V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2) #endif -#define M_BCM1480_MC_GANGED _SB_MAKEMASK1(36) -#define M_BCM1480_MC_BY9_INTF _SB_MAKEMASK1(37) -#define M_BCM1480_MC_FORCE_ECC64 _SB_MAKEMASK1(38) -#define M_BCM1480_MC_ECC_DISABLE _SB_MAKEMASK1(39) +#define M_BCM1480_MC_GANGED _SB_MAKEMASK1(36) +#define M_BCM1480_MC_BY9_INTF _SB_MAKEMASK1(37) +#define M_BCM1480_MC_FORCE_ECC64 _SB_MAKEMASK1(38) +#define M_BCM1480_MC_ECC_DISABLE _SB_MAKEMASK1(39) -#define S_BCM1480_MC_PG_POLICY 40 -#define M_BCM1480_MC_PG_POLICY _SB_MAKEMASK(2, S_BCM1480_MC_PG_POLICY) -#define V_BCM1480_MC_PG_POLICY(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PG_POLICY) -#define G_BCM1480_MC_PG_POLICY(x) _SB_GETVALUE(x, S_BCM1480_MC_PG_POLICY, M_BCM1480_MC_PG_POLICY) +#define S_BCM1480_MC_PG_POLICY 40 +#define M_BCM1480_MC_PG_POLICY _SB_MAKEMASK(2, S_BCM1480_MC_PG_POLICY) +#define V_BCM1480_MC_PG_POLICY(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PG_POLICY) +#define G_BCM1480_MC_PG_POLICY(x) _SB_GETVALUE(x, S_BCM1480_MC_PG_POLICY, M_BCM1480_MC_PG_POLICY) -#define K_BCM1480_MC_PG_POLICY_CLOSED 0 +#define K_BCM1480_MC_PG_POLICY_CLOSED 0 #define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1 -#define V_BCM1480_MC_PG_POLICY_CLOSED V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED) +#define V_BCM1480_MC_PG_POLICY_CLOSED V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED) #define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK) #if SIBYTE_HDR_FEATURE(1480, PASS2) @@ -447,32 +447,32 @@ #endif #define V_BCM1480_MC_DRAMMODE_DEFAULT V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \ - V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK) + V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK) /* * Memory Clock Configuration Register (Table 92) */ -#define S_BCM1480_MC_CLK_RATIO 0 -#define M_BCM1480_MC_CLK_RATIO _SB_MAKEMASK(6, S_BCM1480_MC_CLK_RATIO) -#define V_BCM1480_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CLK_RATIO) -#define G_BCM1480_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_BCM1480_MC_CLK_RATIO, M_BCM1480_MC_CLK_RATIO) +#define S_BCM1480_MC_CLK_RATIO 0 +#define M_BCM1480_MC_CLK_RATIO _SB_MAKEMASK(6, S_BCM1480_MC_CLK_RATIO) +#define V_BCM1480_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CLK_RATIO) +#define G_BCM1480_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_BCM1480_MC_CLK_RATIO, M_BCM1480_MC_CLK_RATIO) -#define V_BCM1480_MC_CLK_RATIO_DEFAULT V_BCM1480_MC_CLK_RATIO(10) +#define V_BCM1480_MC_CLK_RATIO_DEFAULT V_BCM1480_MC_CLK_RATIO(10) -#define S_BCM1480_MC_REF_RATE 8 -#define M_BCM1480_MC_REF_RATE _SB_MAKEMASK(8, S_BCM1480_MC_REF_RATE) -#define V_BCM1480_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_REF_RATE) -#define G_BCM1480_MC_REF_RATE(x) _SB_GETVALUE(x, S_BCM1480_MC_REF_RATE, M_BCM1480_MC_REF_RATE) +#define S_BCM1480_MC_REF_RATE 8 +#define M_BCM1480_MC_REF_RATE _SB_MAKEMASK(8, S_BCM1480_MC_REF_RATE) +#define V_BCM1480_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_REF_RATE) +#define G_BCM1480_MC_REF_RATE(x) _SB_GETVALUE(x, S_BCM1480_MC_REF_RATE, M_BCM1480_MC_REF_RATE) -#define K_BCM1480_MC_REF_RATE_100MHz 0x31 -#define K_BCM1480_MC_REF_RATE_200MHz 0x62 -#define K_BCM1480_MC_REF_RATE_400MHz 0xC4 +#define K_BCM1480_MC_REF_RATE_100MHz 0x31 +#define K_BCM1480_MC_REF_RATE_200MHz 0x62 +#define K_BCM1480_MC_REF_RATE_400MHz 0xC4 -#define V_BCM1480_MC_REF_RATE_100MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz) -#define V_BCM1480_MC_REF_RATE_200MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz) -#define V_BCM1480_MC_REF_RATE_400MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz) -#define V_BCM1480_MC_REF_RATE_DEFAULT V_BCM1480_MC_REF_RATE_400MHz +#define V_BCM1480_MC_REF_RATE_100MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz) +#define V_BCM1480_MC_REF_RATE_200MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz) +#define V_BCM1480_MC_REF_RATE_400MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz) +#define V_BCM1480_MC_REF_RATE_DEFAULT V_BCM1480_MC_REF_RATE_400MHz #if SIBYTE_HDR_FEATURE(1480, PASS2) #define M_BCM1480_MC_AUTO_REF_DIS _SB_MAKEMASK1(16) @@ -518,19 +518,19 @@ #define M_BCM1480_MC_CS_ODD_ODT_EN _SB_MAKEMASK1(32) -#define S_BCM1480_MC_ODT0 0 +#define S_BCM1480_MC_ODT0 0 #define M_BCM1480_MC_ODT0 _SB_MAKEMASK(8, S_BCM1480_MC_ODT0) #define V_BCM1480_MC_ODT0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT0) -#define S_BCM1480_MC_ODT2 8 +#define S_BCM1480_MC_ODT2 8 #define M_BCM1480_MC_ODT2 _SB_MAKEMASK(8, S_BCM1480_MC_ODT2) #define V_BCM1480_MC_ODT2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT2) -#define S_BCM1480_MC_ODT4 16 +#define S_BCM1480_MC_ODT4 16 #define M_BCM1480_MC_ODT4 _SB_MAKEMASK(8, S_BCM1480_MC_ODT4) #define V_BCM1480_MC_ODT4(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT4) -#define S_BCM1480_MC_ODT6 24 +#define S_BCM1480_MC_ODT6 24 #define M_BCM1480_MC_ODT6 _SB_MAKEMASK(8, S_BCM1480_MC_ODT6) #define V_BCM1480_MC_ODT6(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT6) #endif @@ -539,139 +539,139 @@ * Memory DLL Configuration Register (Table 93) */ -#define S_BCM1480_MC_ADDR_COARSE_ADJ 0 -#define M_BCM1480_MC_ADDR_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_ADDR_COARSE_ADJ) -#define V_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ) -#define G_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ, M_BCM1480_MC_ADDR_COARSE_ADJ) +#define S_BCM1480_MC_ADDR_COARSE_ADJ 0 +#define M_BCM1480_MC_ADDR_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_ADDR_COARSE_ADJ) +#define V_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ) +#define G_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ, M_BCM1480_MC_ADDR_COARSE_ADJ) #define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0) #if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_ADDR_FREQ_RANGE 8 -#define M_BCM1480_MC_ADDR_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FREQ_RANGE) -#define V_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE) -#define G_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE, M_BCM1480_MC_ADDR_FREQ_RANGE) -#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT V_BCM1480_MC_ADDR_FREQ_RANGE(0x4) +#define S_BCM1480_MC_ADDR_FREQ_RANGE 8 +#define M_BCM1480_MC_ADDR_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FREQ_RANGE) +#define V_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE) +#define G_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE, M_BCM1480_MC_ADDR_FREQ_RANGE) +#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT V_BCM1480_MC_ADDR_FREQ_RANGE(0x4) #endif -#define S_BCM1480_MC_ADDR_FINE_ADJ 8 -#define M_BCM1480_MC_ADDR_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FINE_ADJ) -#define V_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ) -#define G_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ, M_BCM1480_MC_ADDR_FINE_ADJ) +#define S_BCM1480_MC_ADDR_FINE_ADJ 8 +#define M_BCM1480_MC_ADDR_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FINE_ADJ) +#define V_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ) +#define G_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ, M_BCM1480_MC_ADDR_FINE_ADJ) #define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT V_BCM1480_MC_ADDR_FINE_ADJ(0x8) -#define S_BCM1480_MC_DQI_COARSE_ADJ 16 -#define M_BCM1480_MC_DQI_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQI_COARSE_ADJ) -#define V_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ) -#define G_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ, M_BCM1480_MC_DQI_COARSE_ADJ) +#define S_BCM1480_MC_DQI_COARSE_ADJ 16 +#define M_BCM1480_MC_DQI_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQI_COARSE_ADJ) +#define V_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ) +#define G_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ, M_BCM1480_MC_DQI_COARSE_ADJ) #define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0) #if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_DQI_FREQ_RANGE 24 -#define M_BCM1480_MC_DQI_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FREQ_RANGE) -#define V_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE) -#define G_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE, M_BCM1480_MC_DQI_FREQ_RANGE) -#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQI_FREQ_RANGE(0x4) +#define S_BCM1480_MC_DQI_FREQ_RANGE 24 +#define M_BCM1480_MC_DQI_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FREQ_RANGE) +#define V_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE) +#define G_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE, M_BCM1480_MC_DQI_FREQ_RANGE) +#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQI_FREQ_RANGE(0x4) #endif -#define S_BCM1480_MC_DQI_FINE_ADJ 24 -#define M_BCM1480_MC_DQI_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FINE_ADJ) -#define V_BCM1480_MC_DQI_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ) -#define G_BCM1480_MC_DQI_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ, M_BCM1480_MC_DQI_FINE_ADJ) +#define S_BCM1480_MC_DQI_FINE_ADJ 24 +#define M_BCM1480_MC_DQI_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FINE_ADJ) +#define V_BCM1480_MC_DQI_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ) +#define G_BCM1480_MC_DQI_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ, M_BCM1480_MC_DQI_FINE_ADJ) #define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT V_BCM1480_MC_DQI_FINE_ADJ(0x8) -#define S_BCM1480_MC_DQO_COARSE_ADJ 32 -#define M_BCM1480_MC_DQO_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQO_COARSE_ADJ) -#define V_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ) -#define G_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ, M_BCM1480_MC_DQO_COARSE_ADJ) +#define S_BCM1480_MC_DQO_COARSE_ADJ 32 +#define M_BCM1480_MC_DQO_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQO_COARSE_ADJ) +#define V_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ) +#define G_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ, M_BCM1480_MC_DQO_COARSE_ADJ) #define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0) #if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_DQO_FREQ_RANGE 40 -#define M_BCM1480_MC_DQO_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FREQ_RANGE) -#define V_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE) -#define G_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE, M_BCM1480_MC_DQO_FREQ_RANGE) -#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQO_FREQ_RANGE(0x4) +#define S_BCM1480_MC_DQO_FREQ_RANGE 40 +#define M_BCM1480_MC_DQO_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FREQ_RANGE) +#define V_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE) +#define G_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE, M_BCM1480_MC_DQO_FREQ_RANGE) +#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQO_FREQ_RANGE(0x4) #endif -#define S_BCM1480_MC_DQO_FINE_ADJ 40 -#define M_BCM1480_MC_DQO_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FINE_ADJ) -#define V_BCM1480_MC_DQO_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ) -#define G_BCM1480_MC_DQO_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ, M_BCM1480_MC_DQO_FINE_ADJ) +#define S_BCM1480_MC_DQO_FINE_ADJ 40 +#define M_BCM1480_MC_DQO_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FINE_ADJ) +#define V_BCM1480_MC_DQO_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ) +#define G_BCM1480_MC_DQO_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ, M_BCM1480_MC_DQO_FINE_ADJ) #define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT V_BCM1480_MC_DQO_FINE_ADJ(0x8) #if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_DLL_PDSEL 44 -#define M_BCM1480_MC_DLL_PDSEL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_PDSEL) -#define V_BCM1480_MC_DLL_PDSEL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_PDSEL) -#define G_BCM1480_MC_DLL_PDSEL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_PDSEL, M_BCM1480_MC_DLL_PDSEL) -#define V_BCM1480_MC_DLL_DEFAULT_PDSEL V_BCM1480_MC_DLL_PDSEL(0x0) - -#define M_BCM1480_MC_DLL_REGBYPASS _SB_MAKEMASK1(46) -#define M_BCM1480_MC_DQO_SHIFT _SB_MAKEMASK1(47) +#define S_BCM1480_MC_DLL_PDSEL 44 +#define M_BCM1480_MC_DLL_PDSEL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_PDSEL) +#define V_BCM1480_MC_DLL_PDSEL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_PDSEL) +#define G_BCM1480_MC_DLL_PDSEL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_PDSEL, M_BCM1480_MC_DLL_PDSEL) +#define V_BCM1480_MC_DLL_DEFAULT_PDSEL V_BCM1480_MC_DLL_PDSEL(0x0) + +#define M_BCM1480_MC_DLL_REGBYPASS _SB_MAKEMASK1(46) +#define M_BCM1480_MC_DQO_SHIFT _SB_MAKEMASK1(47) #endif -#define S_BCM1480_MC_DLL_DEFAULT 48 -#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6, S_BCM1480_MC_DLL_DEFAULT) -#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_DEFAULT) -#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_DEFAULT, M_BCM1480_MC_DLL_DEFAULT) +#define S_BCM1480_MC_DLL_DEFAULT 48 +#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6, S_BCM1480_MC_DLL_DEFAULT) +#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_DEFAULT) +#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_DEFAULT, M_BCM1480_MC_DLL_DEFAULT) #define V_BCM1480_MC_DLL_DEFAULT_DEFAULT V_BCM1480_MC_DLL_DEFAULT(0x10) #if SIBYTE_HDR_FEATURE(1480, PASS2) #define S_BCM1480_MC_DLL_REGCTRL 54 -#define M_BCM1480_MC_DLL_REGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_REGCTRL) -#define V_BCM1480_MC_DLL_REGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_REGCTRL) -#define G_BCM1480_MC_DLL_REGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_REGCTRL, M_BCM1480_MC_DLL_REGCTRL) +#define M_BCM1480_MC_DLL_REGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_REGCTRL) +#define V_BCM1480_MC_DLL_REGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_REGCTRL) +#define G_BCM1480_MC_DLL_REGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_REGCTRL, M_BCM1480_MC_DLL_REGCTRL) #define V_BCM1480_MC_DLL_DEFAULT_REGCTRL V_BCM1480_MC_DLL_REGCTRL(0x0) #endif #if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_DLL_FREQ_RANGE 56 -#define M_BCM1480_MC_DLL_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_FREQ_RANGE) -#define V_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE) -#define G_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE, M_BCM1480_MC_DLL_FREQ_RANGE) -#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT V_BCM1480_MC_DLL_FREQ_RANGE(0x4) +#define S_BCM1480_MC_DLL_FREQ_RANGE 56 +#define M_BCM1480_MC_DLL_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_FREQ_RANGE) +#define V_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE) +#define G_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE, M_BCM1480_MC_DLL_FREQ_RANGE) +#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT V_BCM1480_MC_DLL_FREQ_RANGE(0x4) #endif -#define S_BCM1480_MC_DLL_STEP_SIZE 56 -#define M_BCM1480_MC_DLL_STEP_SIZE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_STEP_SIZE) -#define V_BCM1480_MC_DLL_STEP_SIZE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE) -#define G_BCM1480_MC_DLL_STEP_SIZE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE, M_BCM1480_MC_DLL_STEP_SIZE) +#define S_BCM1480_MC_DLL_STEP_SIZE 56 +#define M_BCM1480_MC_DLL_STEP_SIZE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_STEP_SIZE) +#define V_BCM1480_MC_DLL_STEP_SIZE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE) +#define G_BCM1480_MC_DLL_STEP_SIZE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE, M_BCM1480_MC_DLL_STEP_SIZE) #define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT V_BCM1480_MC_DLL_STEP_SIZE(0x8) #if SIBYTE_HDR_FEATURE(1480, PASS2) #define S_BCM1480_MC_DLL_BGCTRL 60 -#define M_BCM1480_MC_DLL_BGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_BGCTRL) -#define V_BCM1480_MC_DLL_BGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_BGCTRL) -#define G_BCM1480_MC_DLL_BGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_BGCTRL, M_BCM1480_MC_DLL_BGCTRL) -#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL V_BCM1480_MC_DLL_BGCTRL(0x0) +#define M_BCM1480_MC_DLL_BGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_BGCTRL) +#define V_BCM1480_MC_DLL_BGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_BGCTRL) +#define G_BCM1480_MC_DLL_BGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_BGCTRL, M_BCM1480_MC_DLL_BGCTRL) +#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL V_BCM1480_MC_DLL_BGCTRL(0x0) #endif -#define M_BCM1480_MC_DLL_BYPASS _SB_MAKEMASK1(63) +#define M_BCM1480_MC_DLL_BYPASS _SB_MAKEMASK1(63) /* * Memory Drive Configuration Register (Table 94) */ -#define S_BCM1480_MC_RTT_BYP_PULLDOWN 0 -#define M_BCM1480_MC_RTT_BYP_PULLDOWN _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLDOWN) +#define S_BCM1480_MC_RTT_BYP_PULLDOWN 0 +#define M_BCM1480_MC_RTT_BYP_PULLDOWN _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLDOWN) #define V_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN) #define G_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN, M_BCM1480_MC_RTT_BYP_PULLDOWN) -#define S_BCM1480_MC_RTT_BYP_PULLUP 6 -#define M_BCM1480_MC_RTT_BYP_PULLUP _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLUP) -#define V_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP) -#define G_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP, M_BCM1480_MC_RTT_BYP_PULLUP) +#define S_BCM1480_MC_RTT_BYP_PULLUP 6 +#define M_BCM1480_MC_RTT_BYP_PULLUP _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLUP) +#define V_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP) +#define G_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP, M_BCM1480_MC_RTT_BYP_PULLUP) -#define M_BCM1480_MC_RTT_BYPASS _SB_MAKEMASK1(8) -#define M_BCM1480_MC_RTT_COMP_MOV_AVG _SB_MAKEMASK1(9) +#define M_BCM1480_MC_RTT_BYPASS _SB_MAKEMASK1(8) +#define M_BCM1480_MC_RTT_COMP_MOV_AVG _SB_MAKEMASK1(9) #define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN 10 #define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN) #define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN) #define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN, M_BCM1480_MC_PVT_BYP_C1_PULLDOWN) -#define S_BCM1480_MC_PVT_BYP_C1_PULLUP 15 -#define M_BCM1480_MC_PVT_BYP_C1_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLUP) +#define S_BCM1480_MC_PVT_BYP_C1_PULLUP 15 +#define M_BCM1480_MC_PVT_BYP_C1_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLUP) #define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP) #define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP, M_BCM1480_MC_PVT_BYP_C1_PULLUP) @@ -680,153 +680,153 @@ #define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN) #define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN, M_BCM1480_MC_PVT_BYP_C2_PULLDOWN) -#define S_BCM1480_MC_PVT_BYP_C2_PULLUP 25 -#define M_BCM1480_MC_PVT_BYP_C2_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLUP) +#define S_BCM1480_MC_PVT_BYP_C2_PULLUP 25 +#define M_BCM1480_MC_PVT_BYP_C2_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLUP) #define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP) #define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP, M_BCM1480_MC_PVT_BYP_C2_PULLUP) -#define M_BCM1480_MC_PVT_BYPASS _SB_MAKEMASK1(30) -#define M_BCM1480_MC_PVT_COMP_MOV_AVG _SB_MAKEMASK1(31) +#define M_BCM1480_MC_PVT_BYPASS _SB_MAKEMASK1(30) +#define M_BCM1480_MC_PVT_COMP_MOV_AVG _SB_MAKEMASK1(31) -#define M_BCM1480_MC_CLK_CLASS _SB_MAKEMASK1(34) -#define M_BCM1480_MC_DATA_CLASS _SB_MAKEMASK1(35) -#define M_BCM1480_MC_ADDR_CLASS _SB_MAKEMASK1(36) +#define M_BCM1480_MC_CLK_CLASS _SB_MAKEMASK1(34) +#define M_BCM1480_MC_DATA_CLASS _SB_MAKEMASK1(35) +#define M_BCM1480_MC_ADDR_CLASS _SB_MAKEMASK1(36) -#define M_BCM1480_MC_DQ_ODT_75 _SB_MAKEMASK1(37) -#define M_BCM1480_MC_DQ_ODT_150 _SB_MAKEMASK1(38) -#define M_BCM1480_MC_DQS_ODT_75 _SB_MAKEMASK1(39) -#define M_BCM1480_MC_DQS_ODT_150 _SB_MAKEMASK1(40) -#define M_BCM1480_MC_DQS_DIFF _SB_MAKEMASK1(41) +#define M_BCM1480_MC_DQ_ODT_75 _SB_MAKEMASK1(37) +#define M_BCM1480_MC_DQ_ODT_150 _SB_MAKEMASK1(38) +#define M_BCM1480_MC_DQS_ODT_75 _SB_MAKEMASK1(39) +#define M_BCM1480_MC_DQS_ODT_150 _SB_MAKEMASK1(40) +#define M_BCM1480_MC_DQS_DIFF _SB_MAKEMASK1(41) /* * ECC Test Data Register (Table 95) */ -#define S_BCM1480_MC_DATA_INVERT 0 -#define M_DATA_ECC_INVERT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_INVERT) +#define S_BCM1480_MC_DATA_INVERT 0 +#define M_DATA_ECC_INVERT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_INVERT) /* * ECC Test ECC Register (Table 96) */ -#define S_BCM1480_MC_ECC_INVERT 0 -#define M_BCM1480_MC_ECC_INVERT _SB_MAKEMASK(8, S_BCM1480_MC_ECC_INVERT) +#define S_BCM1480_MC_ECC_INVERT 0 +#define M_BCM1480_MC_ECC_INVERT _SB_MAKEMASK(8, S_BCM1480_MC_ECC_INVERT) /* * SDRAM Timing Register (Table 97) */ -#define S_BCM1480_MC_tRCD 0 -#define M_BCM1480_MC_tRCD _SB_MAKEMASK(4, S_BCM1480_MC_tRCD) -#define V_BCM1480_MC_tRCD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCD) -#define G_BCM1480_MC_tRCD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCD, M_BCM1480_MC_tRCD) -#define K_BCM1480_MC_tRCD_DEFAULT 3 -#define V_BCM1480_MC_tRCD_DEFAULT V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT) - -#define S_BCM1480_MC_tCL 4 -#define M_BCM1480_MC_tCL _SB_MAKEMASK(4, S_BCM1480_MC_tCL) -#define V_BCM1480_MC_tCL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCL) -#define G_BCM1480_MC_tCL(x) _SB_GETVALUE(x, S_BCM1480_MC_tCL, M_BCM1480_MC_tCL) -#define K_BCM1480_MC_tCL_DEFAULT 2 -#define V_BCM1480_MC_tCL_DEFAULT V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT) - -#define M_BCM1480_MC_tCrDh _SB_MAKEMASK1(8) - -#define S_BCM1480_MC_tWR 9 -#define M_BCM1480_MC_tWR _SB_MAKEMASK(3, S_BCM1480_MC_tWR) -#define V_BCM1480_MC_tWR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tWR) -#define G_BCM1480_MC_tWR(x) _SB_GETVALUE(x, S_BCM1480_MC_tWR, M_BCM1480_MC_tWR) -#define K_BCM1480_MC_tWR_DEFAULT 2 -#define V_BCM1480_MC_tWR_DEFAULT V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT) - -#define S_BCM1480_MC_tCwD 12 -#define M_BCM1480_MC_tCwD _SB_MAKEMASK(4, S_BCM1480_MC_tCwD) -#define V_BCM1480_MC_tCwD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCwD) -#define G_BCM1480_MC_tCwD(x) _SB_GETVALUE(x, S_BCM1480_MC_tCwD, M_BCM1480_MC_tCwD) -#define K_BCM1480_MC_tCwD_DEFAULT 1 -#define V_BCM1480_MC_tCwD_DEFAULT V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT) - -#define S_BCM1480_MC_tRP 16 -#define M_BCM1480_MC_tRP _SB_MAKEMASK(4, S_BCM1480_MC_tRP) -#define V_BCM1480_MC_tRP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRP) -#define G_BCM1480_MC_tRP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRP, M_BCM1480_MC_tRP) -#define K_BCM1480_MC_tRP_DEFAULT 4 -#define V_BCM1480_MC_tRP_DEFAULT V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT) - -#define S_BCM1480_MC_tRRD 20 -#define M_BCM1480_MC_tRRD _SB_MAKEMASK(4, S_BCM1480_MC_tRRD) -#define V_BCM1480_MC_tRRD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRRD) -#define G_BCM1480_MC_tRRD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRRD, M_BCM1480_MC_tRRD) -#define K_BCM1480_MC_tRRD_DEFAULT 2 -#define V_BCM1480_MC_tRRD_DEFAULT V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT) - -#define S_BCM1480_MC_tRCw 24 -#define M_BCM1480_MC_tRCw _SB_MAKEMASK(5, S_BCM1480_MC_tRCw) -#define V_BCM1480_MC_tRCw(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCw) -#define G_BCM1480_MC_tRCw(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCw, M_BCM1480_MC_tRCw) -#define K_BCM1480_MC_tRCw_DEFAULT 10 -#define V_BCM1480_MC_tRCw_DEFAULT V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT) - -#define S_BCM1480_MC_tRCr 32 -#define M_BCM1480_MC_tRCr _SB_MAKEMASK(5, S_BCM1480_MC_tRCr) -#define V_BCM1480_MC_tRCr(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCr) -#define G_BCM1480_MC_tRCr(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCr, M_BCM1480_MC_tRCr) -#define K_BCM1480_MC_tRCr_DEFAULT 9 -#define V_BCM1480_MC_tRCr_DEFAULT V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT) +#define S_BCM1480_MC_tRCD 0 +#define M_BCM1480_MC_tRCD _SB_MAKEMASK(4, S_BCM1480_MC_tRCD) +#define V_BCM1480_MC_tRCD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCD) +#define G_BCM1480_MC_tRCD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCD, M_BCM1480_MC_tRCD) +#define K_BCM1480_MC_tRCD_DEFAULT 3 +#define V_BCM1480_MC_tRCD_DEFAULT V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT) + +#define S_BCM1480_MC_tCL 4 +#define M_BCM1480_MC_tCL _SB_MAKEMASK(4, S_BCM1480_MC_tCL) +#define V_BCM1480_MC_tCL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCL) +#define G_BCM1480_MC_tCL(x) _SB_GETVALUE(x, S_BCM1480_MC_tCL, M_BCM1480_MC_tCL) +#define K_BCM1480_MC_tCL_DEFAULT 2 +#define V_BCM1480_MC_tCL_DEFAULT V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT) + +#define M_BCM1480_MC_tCrDh _SB_MAKEMASK1(8) + +#define S_BCM1480_MC_tWR 9 +#define M_BCM1480_MC_tWR _SB_MAKEMASK(3, S_BCM1480_MC_tWR) +#define V_BCM1480_MC_tWR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tWR) +#define G_BCM1480_MC_tWR(x) _SB_GETVALUE(x, S_BCM1480_MC_tWR, M_BCM1480_MC_tWR) +#define K_BCM1480_MC_tWR_DEFAULT 2 +#define V_BCM1480_MC_tWR_DEFAULT V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT) + +#define S_BCM1480_MC_tCwD 12 +#define M_BCM1480_MC_tCwD _SB_MAKEMASK(4, S_BCM1480_MC_tCwD) +#define V_BCM1480_MC_tCwD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCwD) +#define G_BCM1480_MC_tCwD(x) _SB_GETVALUE(x, S_BCM1480_MC_tCwD, M_BCM1480_MC_tCwD) +#define K_BCM1480_MC_tCwD_DEFAULT 1 +#define V_BCM1480_MC_tCwD_DEFAULT V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT) + +#define S_BCM1480_MC_tRP 16 +#define M_BCM1480_MC_tRP _SB_MAKEMASK(4, S_BCM1480_MC_tRP) +#define V_BCM1480_MC_tRP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRP) +#define G_BCM1480_MC_tRP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRP, M_BCM1480_MC_tRP) +#define K_BCM1480_MC_tRP_DEFAULT 4 +#define V_BCM1480_MC_tRP_DEFAULT V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT) + +#define S_BCM1480_MC_tRRD 20 +#define M_BCM1480_MC_tRRD _SB_MAKEMASK(4, S_BCM1480_MC_tRRD) +#define V_BCM1480_MC_tRRD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRRD) +#define G_BCM1480_MC_tRRD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRRD, M_BCM1480_MC_tRRD) +#define K_BCM1480_MC_tRRD_DEFAULT 2 +#define V_BCM1480_MC_tRRD_DEFAULT V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT) + +#define S_BCM1480_MC_tRCw 24 +#define M_BCM1480_MC_tRCw _SB_MAKEMASK(5, S_BCM1480_MC_tRCw) +#define V_BCM1480_MC_tRCw(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCw) +#define G_BCM1480_MC_tRCw(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCw, M_BCM1480_MC_tRCw) +#define K_BCM1480_MC_tRCw_DEFAULT 10 +#define V_BCM1480_MC_tRCw_DEFAULT V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT) + +#define S_BCM1480_MC_tRCr 32 +#define M_BCM1480_MC_tRCr _SB_MAKEMASK(5, S_BCM1480_MC_tRCr) +#define V_BCM1480_MC_tRCr(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCr) +#define G_BCM1480_MC_tRCr(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCr, M_BCM1480_MC_tRCr) +#define K_BCM1480_MC_tRCr_DEFAULT 9 +#define V_BCM1480_MC_tRCr_DEFAULT V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT) #if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_tFAW 40 -#define M_BCM1480_MC_tFAW _SB_MAKEMASK(6, S_BCM1480_MC_tFAW) -#define V_BCM1480_MC_tFAW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFAW) -#define G_BCM1480_MC_tFAW(x) _SB_GETVALUE(x, S_BCM1480_MC_tFAW, M_BCM1480_MC_tFAW) -#define K_BCM1480_MC_tFAW_DEFAULT 0 -#define V_BCM1480_MC_tFAW_DEFAULT V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT) +#define S_BCM1480_MC_tFAW 40 +#define M_BCM1480_MC_tFAW _SB_MAKEMASK(6, S_BCM1480_MC_tFAW) +#define V_BCM1480_MC_tFAW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFAW) +#define G_BCM1480_MC_tFAW(x) _SB_GETVALUE(x, S_BCM1480_MC_tFAW, M_BCM1480_MC_tFAW) +#define K_BCM1480_MC_tFAW_DEFAULT 0 +#define V_BCM1480_MC_tFAW_DEFAULT V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT) #endif -#define S_BCM1480_MC_tRFC 48 -#define M_BCM1480_MC_tRFC _SB_MAKEMASK(7, S_BCM1480_MC_tRFC) -#define V_BCM1480_MC_tRFC(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRFC) -#define G_BCM1480_MC_tRFC(x) _SB_GETVALUE(x, S_BCM1480_MC_tRFC, M_BCM1480_MC_tRFC) -#define K_BCM1480_MC_tRFC_DEFAULT 12 -#define V_BCM1480_MC_tRFC_DEFAULT V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT) - -#define S_BCM1480_MC_tFIFO 56 -#define M_BCM1480_MC_tFIFO _SB_MAKEMASK(2, S_BCM1480_MC_tFIFO) -#define V_BCM1480_MC_tFIFO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFIFO) -#define G_BCM1480_MC_tFIFO(x) _SB_GETVALUE(x, S_BCM1480_MC_tFIFO, M_BCM1480_MC_tFIFO) -#define K_BCM1480_MC_tFIFO_DEFAULT 0 -#define V_BCM1480_MC_tFIFO_DEFAULT V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT) - -#define S_BCM1480_MC_tW2R 58 -#define M_BCM1480_MC_tW2R _SB_MAKEMASK(2, S_BCM1480_MC_tW2R) -#define V_BCM1480_MC_tW2R(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2R) -#define G_BCM1480_MC_tW2R(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2R, M_BCM1480_MC_tW2R) -#define K_BCM1480_MC_tW2R_DEFAULT 1 -#define V_BCM1480_MC_tW2R_DEFAULT V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT) - -#define S_BCM1480_MC_tR2W 60 -#define M_BCM1480_MC_tR2W _SB_MAKEMASK(2, S_BCM1480_MC_tR2W) -#define V_BCM1480_MC_tR2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tR2W) -#define G_BCM1480_MC_tR2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tR2W, M_BCM1480_MC_tR2W) -#define K_BCM1480_MC_tR2W_DEFAULT 0 -#define V_BCM1480_MC_tR2W_DEFAULT V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT) +#define S_BCM1480_MC_tRFC 48 +#define M_BCM1480_MC_tRFC _SB_MAKEMASK(7, S_BCM1480_MC_tRFC) +#define V_BCM1480_MC_tRFC(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRFC) +#define G_BCM1480_MC_tRFC(x) _SB_GETVALUE(x, S_BCM1480_MC_tRFC, M_BCM1480_MC_tRFC) +#define K_BCM1480_MC_tRFC_DEFAULT 12 +#define V_BCM1480_MC_tRFC_DEFAULT V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT) + +#define S_BCM1480_MC_tFIFO 56 +#define M_BCM1480_MC_tFIFO _SB_MAKEMASK(2, S_BCM1480_MC_tFIFO) +#define V_BCM1480_MC_tFIFO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFIFO) +#define G_BCM1480_MC_tFIFO(x) _SB_GETVALUE(x, S_BCM1480_MC_tFIFO, M_BCM1480_MC_tFIFO) +#define K_BCM1480_MC_tFIFO_DEFAULT 0 +#define V_BCM1480_MC_tFIFO_DEFAULT V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT) + +#define S_BCM1480_MC_tW2R 58 +#define M_BCM1480_MC_tW2R _SB_MAKEMASK(2, S_BCM1480_MC_tW2R) +#define V_BCM1480_MC_tW2R(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2R) +#define G_BCM1480_MC_tW2R(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2R, M_BCM1480_MC_tW2R) +#define K_BCM1480_MC_tW2R_DEFAULT 1 +#define V_BCM1480_MC_tW2R_DEFAULT V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT) + +#define S_BCM1480_MC_tR2W 60 +#define M_BCM1480_MC_tR2W _SB_MAKEMASK(2, S_BCM1480_MC_tR2W) +#define V_BCM1480_MC_tR2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tR2W) +#define G_BCM1480_MC_tR2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tR2W, M_BCM1480_MC_tR2W) +#define K_BCM1480_MC_tR2W_DEFAULT 0 +#define V_BCM1480_MC_tR2W_DEFAULT V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT) #define M_BCM1480_MC_tR2R _SB_MAKEMASK1(62) -#define V_BCM1480_MC_TIMING_DEFAULT (M_BCM1480_MC_tR2R | \ - V_BCM1480_MC_tFIFO_DEFAULT | \ - V_BCM1480_MC_tR2W_DEFAULT | \ - V_BCM1480_MC_tW2R_DEFAULT | \ - V_BCM1480_MC_tRFC_DEFAULT | \ - V_BCM1480_MC_tRCr_DEFAULT | \ - V_BCM1480_MC_tRCw_DEFAULT | \ - V_BCM1480_MC_tRRD_DEFAULT | \ - V_BCM1480_MC_tRP_DEFAULT | \ - V_BCM1480_MC_tCwD_DEFAULT | \ - V_BCM1480_MC_tWR_DEFAULT | \ - M_BCM1480_MC_tCrDh | \ - V_BCM1480_MC_tCL_DEFAULT | \ - V_BCM1480_MC_tRCD_DEFAULT) +#define V_BCM1480_MC_TIMING_DEFAULT (M_BCM1480_MC_tR2R | \ + V_BCM1480_MC_tFIFO_DEFAULT | \ + V_BCM1480_MC_tR2W_DEFAULT | \ + V_BCM1480_MC_tW2R_DEFAULT | \ + V_BCM1480_MC_tRFC_DEFAULT | \ + V_BCM1480_MC_tRCr_DEFAULT | \ + V_BCM1480_MC_tRCw_DEFAULT | \ + V_BCM1480_MC_tRRD_DEFAULT | \ + V_BCM1480_MC_tRP_DEFAULT | \ + V_BCM1480_MC_tCwD_DEFAULT | \ + V_BCM1480_MC_tWR_DEFAULT | \ + M_BCM1480_MC_tCrDh | \ + V_BCM1480_MC_tCL_DEFAULT | \ + V_BCM1480_MC_tRCD_DEFAULT) /* * SDRAM Timing Register 2 @@ -834,33 +834,33 @@ #if SIBYTE_HDR_FEATURE(1480, PASS2) -#define S_BCM1480_MC_tAL 0 -#define M_BCM1480_MC_tAL _SB_MAKEMASK(4, S_BCM1480_MC_tAL) -#define V_BCM1480_MC_tAL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tAL) -#define G_BCM1480_MC_tAL(x) _SB_GETVALUE(x, S_BCM1480_MC_tAL, M_BCM1480_MC_tAL) -#define K_BCM1480_MC_tAL_DEFAULT 0 -#define V_BCM1480_MC_tAL_DEFAULT V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT) - -#define S_BCM1480_MC_tRTP 4 -#define M_BCM1480_MC_tRTP _SB_MAKEMASK(3, S_BCM1480_MC_tRTP) -#define V_BCM1480_MC_tRTP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRTP) -#define G_BCM1480_MC_tRTP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRTP, M_BCM1480_MC_tRTP) -#define K_BCM1480_MC_tRTP_DEFAULT 2 -#define V_BCM1480_MC_tRTP_DEFAULT V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT) - -#define S_BCM1480_MC_tW2W 8 -#define M_BCM1480_MC_tW2W _SB_MAKEMASK(2, S_BCM1480_MC_tW2W) -#define V_BCM1480_MC_tW2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2W) -#define G_BCM1480_MC_tW2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2W, M_BCM1480_MC_tW2W) -#define K_BCM1480_MC_tW2W_DEFAULT 0 -#define V_BCM1480_MC_tW2W_DEFAULT V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT) - -#define S_BCM1480_MC_tRAP 12 -#define M_BCM1480_MC_tRAP _SB_MAKEMASK(4, S_BCM1480_MC_tRAP) -#define V_BCM1480_MC_tRAP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRAP) -#define G_BCM1480_MC_tRAP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRAP, M_BCM1480_MC_tRAP) -#define K_BCM1480_MC_tRAP_DEFAULT 0 -#define V_BCM1480_MC_tRAP_DEFAULT V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT) +#define S_BCM1480_MC_tAL 0 +#define M_BCM1480_MC_tAL _SB_MAKEMASK(4, S_BCM1480_MC_tAL) +#define V_BCM1480_MC_tAL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tAL) +#define G_BCM1480_MC_tAL(x) _SB_GETVALUE(x, S_BCM1480_MC_tAL, M_BCM1480_MC_tAL) +#define K_BCM1480_MC_tAL_DEFAULT 0 +#define V_BCM1480_MC_tAL_DEFAULT V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT) + +#define S_BCM1480_MC_tRTP 4 +#define M_BCM1480_MC_tRTP _SB_MAKEMASK(3, S_BCM1480_MC_tRTP) +#define V_BCM1480_MC_tRTP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRTP) +#define G_BCM1480_MC_tRTP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRTP, M_BCM1480_MC_tRTP) +#define K_BCM1480_MC_tRTP_DEFAULT 2 +#define V_BCM1480_MC_tRTP_DEFAULT V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT) + +#define S_BCM1480_MC_tW2W 8 +#define M_BCM1480_MC_tW2W _SB_MAKEMASK(2, S_BCM1480_MC_tW2W) +#define V_BCM1480_MC_tW2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2W) +#define G_BCM1480_MC_tW2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2W, M_BCM1480_MC_tW2W) +#define K_BCM1480_MC_tW2W_DEFAULT 0 +#define V_BCM1480_MC_tW2W_DEFAULT V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT) + +#define S_BCM1480_MC_tRAP 12 +#define M_BCM1480_MC_tRAP _SB_MAKEMASK(4, S_BCM1480_MC_tRAP) +#define V_BCM1480_MC_tRAP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRAP) +#define G_BCM1480_MC_tRAP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRAP, M_BCM1480_MC_tRAP) +#define K_BCM1480_MC_tRAP_DEFAULT 0 +#define V_BCM1480_MC_tRAP_DEFAULT V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT) #endif @@ -874,111 +874,111 @@ * Global Configuration Register (Table 99) */ -#define S_BCM1480_MC_BLK_SET_MARK 8 -#define M_BCM1480_MC_BLK_SET_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_SET_MARK) -#define V_BCM1480_MC_BLK_SET_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_SET_MARK) -#define G_BCM1480_MC_BLK_SET_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_SET_MARK, M_BCM1480_MC_BLK_SET_MARK) +#define S_BCM1480_MC_BLK_SET_MARK 8 +#define M_BCM1480_MC_BLK_SET_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_SET_MARK) +#define V_BCM1480_MC_BLK_SET_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_SET_MARK) +#define G_BCM1480_MC_BLK_SET_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_SET_MARK, M_BCM1480_MC_BLK_SET_MARK) -#define S_BCM1480_MC_BLK_CLR_MARK 12 -#define M_BCM1480_MC_BLK_CLR_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_CLR_MARK) -#define V_BCM1480_MC_BLK_CLR_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_CLR_MARK) -#define G_BCM1480_MC_BLK_CLR_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_CLR_MARK, M_BCM1480_MC_BLK_CLR_MARK) +#define S_BCM1480_MC_BLK_CLR_MARK 12 +#define M_BCM1480_MC_BLK_CLR_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_CLR_MARK) +#define V_BCM1480_MC_BLK_CLR_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_CLR_MARK) +#define G_BCM1480_MC_BLK_CLR_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_CLR_MARK, M_BCM1480_MC_BLK_CLR_MARK) -#define M_BCM1480_MC_PKT_PRIORITY _SB_MAKEMASK1(16) +#define M_BCM1480_MC_PKT_PRIORITY _SB_MAKEMASK1(16) -#define S_BCM1480_MC_MAX_AGE 20 -#define M_BCM1480_MC_MAX_AGE _SB_MAKEMASK(4, S_BCM1480_MC_MAX_AGE) -#define V_BCM1480_MC_MAX_AGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MAX_AGE) -#define G_BCM1480_MC_MAX_AGE(x) _SB_GETVALUE(x, S_BCM1480_MC_MAX_AGE, M_BCM1480_MC_MAX_AGE) +#define S_BCM1480_MC_MAX_AGE 20 +#define M_BCM1480_MC_MAX_AGE _SB_MAKEMASK(4, S_BCM1480_MC_MAX_AGE) +#define V_BCM1480_MC_MAX_AGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MAX_AGE) +#define G_BCM1480_MC_MAX_AGE(x) _SB_GETVALUE(x, S_BCM1480_MC_MAX_AGE, M_BCM1480_MC_MAX_AGE) -#define M_BCM1480_MC_BERR_DISABLE _SB_MAKEMASK1(29) -#define M_BCM1480_MC_FORCE_SEQ _SB_MAKEMASK1(30) -#define M_BCM1480_MC_VGEN _SB_MAKEMASK1(32) +#define M_BCM1480_MC_BERR_DISABLE _SB_MAKEMASK1(29) +#define M_BCM1480_MC_FORCE_SEQ _SB_MAKEMASK1(30) +#define M_BCM1480_MC_VGEN _SB_MAKEMASK1(32) -#define S_BCM1480_MC_SLEW 33 -#define M_BCM1480_MC_SLEW _SB_MAKEMASK(2, S_BCM1480_MC_SLEW) -#define V_BCM1480_MC_SLEW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_SLEW) -#define G_BCM1480_MC_SLEW(x) _SB_GETVALUE(x, S_BCM1480_MC_SLEW, M_BCM1480_MC_SLEW) +#define S_BCM1480_MC_SLEW 33 +#define M_BCM1480_MC_SLEW _SB_MAKEMASK(2, S_BCM1480_MC_SLEW) +#define V_BCM1480_MC_SLEW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_SLEW) +#define G_BCM1480_MC_SLEW(x) _SB_GETVALUE(x, S_BCM1480_MC_SLEW, M_BCM1480_MC_SLEW) -#define M_BCM1480_MC_SSTL_VOLTAGE _SB_MAKEMASK1(35) +#define M_BCM1480_MC_SSTL_VOLTAGE _SB_MAKEMASK1(35) /* * Global Channel Interleave Register (Table 100) */ -#define S_BCM1480_MC_INTLV0 0 -#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0) -#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0) -#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0) - -#define S_BCM1480_MC_INTLV1 8 -#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1) -#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1) -#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1) - -#define S_BCM1480_MC_INTLV_MODE 16 -#define M_BCM1480_MC_INTLV_MODE _SB_MAKEMASK(3, S_BCM1480_MC_INTLV_MODE) -#define V_BCM1480_MC_INTLV_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV_MODE) -#define G_BCM1480_MC_INTLV_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV_MODE, M_BCM1480_MC_INTLV_MODE) - -#define K_BCM1480_MC_INTLV_MODE_NONE 0x0 -#define K_BCM1480_MC_INTLV_MODE_01 0x1 -#define K_BCM1480_MC_INTLV_MODE_23 0x2 -#define K_BCM1480_MC_INTLV_MODE_01_23 0x3 -#define K_BCM1480_MC_INTLV_MODE_0123 0x4 - -#define V_BCM1480_MC_INTLV_MODE_NONE V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE) -#define V_BCM1480_MC_INTLV_MODE_01 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01) -#define V_BCM1480_MC_INTLV_MODE_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23) -#define V_BCM1480_MC_INTLV_MODE_01_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23) -#define V_BCM1480_MC_INTLV_MODE_0123 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123) +#define S_BCM1480_MC_INTLV0 0 +#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0) +#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0) +#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0) + +#define S_BCM1480_MC_INTLV1 8 +#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1) +#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1) +#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1) + +#define S_BCM1480_MC_INTLV_MODE 16 +#define M_BCM1480_MC_INTLV_MODE _SB_MAKEMASK(3, S_BCM1480_MC_INTLV_MODE) +#define V_BCM1480_MC_INTLV_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV_MODE) +#define G_BCM1480_MC_INTLV_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV_MODE, M_BCM1480_MC_INTLV_MODE) + +#define K_BCM1480_MC_INTLV_MODE_NONE 0x0 +#define K_BCM1480_MC_INTLV_MODE_01 0x1 +#define K_BCM1480_MC_INTLV_MODE_23 0x2 +#define K_BCM1480_MC_INTLV_MODE_01_23 0x3 +#define K_BCM1480_MC_INTLV_MODE_0123 0x4 + +#define V_BCM1480_MC_INTLV_MODE_NONE V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE) +#define V_BCM1480_MC_INTLV_MODE_01 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01) +#define V_BCM1480_MC_INTLV_MODE_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23) +#define V_BCM1480_MC_INTLV_MODE_01_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23) +#define V_BCM1480_MC_INTLV_MODE_0123 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123) /* * ECC Status Register */ -#define S_BCM1480_MC_ECC_ERR_ADDR 0 -#define M_BCM1480_MC_ECC_ERR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_ERR_ADDR) -#define V_BCM1480_MC_ECC_ERR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR) -#define G_BCM1480_MC_ECC_ERR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR, M_BCM1480_MC_ECC_ERR_ADDR) +#define S_BCM1480_MC_ECC_ERR_ADDR 0 +#define M_BCM1480_MC_ECC_ERR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_ERR_ADDR) +#define V_BCM1480_MC_ECC_ERR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR) +#define G_BCM1480_MC_ECC_ERR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR, M_BCM1480_MC_ECC_ERR_ADDR) #if SIBYTE_HDR_FEATURE(1480, PASS2) -#define M_BCM1480_MC_ECC_ERR_RMW _SB_MAKEMASK1(60) +#define M_BCM1480_MC_ECC_ERR_RMW _SB_MAKEMASK1(60) #endif -#define M_BCM1480_MC_ECC_MULT_ERR_DET _SB_MAKEMASK1(61) -#define M_BCM1480_MC_ECC_UERR_DET _SB_MAKEMASK1(62) -#define M_BCM1480_MC_ECC_CERR_DET _SB_MAKEMASK1(63) +#define M_BCM1480_MC_ECC_MULT_ERR_DET _SB_MAKEMASK1(61) +#define M_BCM1480_MC_ECC_UERR_DET _SB_MAKEMASK1(62) +#define M_BCM1480_MC_ECC_CERR_DET _SB_MAKEMASK1(63) /* * Global ECC Address Register (Table 102) */ -#define S_BCM1480_MC_ECC_CORR_ADDR 0 -#define M_BCM1480_MC_ECC_CORR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_CORR_ADDR) -#define V_BCM1480_MC_ECC_CORR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR) -#define G_BCM1480_MC_ECC_CORR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR, M_BCM1480_MC_ECC_CORR_ADDR) +#define S_BCM1480_MC_ECC_CORR_ADDR 0 +#define M_BCM1480_MC_ECC_CORR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_CORR_ADDR) +#define V_BCM1480_MC_ECC_CORR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR) +#define G_BCM1480_MC_ECC_CORR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR, M_BCM1480_MC_ECC_CORR_ADDR) /* * Global ECC Correction Register (Table 103) */ -#define S_BCM1480_MC_ECC_CORRECT 0 -#define M_BCM1480_MC_ECC_CORRECT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_CORRECT) -#define V_BCM1480_MC_ECC_CORRECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORRECT) -#define G_BCM1480_MC_ECC_CORRECT(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORRECT, M_BCM1480_MC_ECC_CORRECT) +#define S_BCM1480_MC_ECC_CORRECT 0 +#define M_BCM1480_MC_ECC_CORRECT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_CORRECT) +#define V_BCM1480_MC_ECC_CORRECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORRECT) +#define G_BCM1480_MC_ECC_CORRECT(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORRECT, M_BCM1480_MC_ECC_CORRECT) /* * Global ECC Performance Counters Control Register (Table 104) */ -#define S_BCM1480_MC_CHANNEL_SELECT 0 -#define M_BCM1480_MC_CHANNEL_SELECT _SB_MAKEMASK(4, S_BCM1480_MC_CHANNEL_SELECT) -#define V_BCM1480_MC_CHANNEL_SELECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CHANNEL_SELECT) -#define G_BCM1480_MC_CHANNEL_SELECT(x) _SB_GETVALUE(x, S_BCM1480_MC_CHANNEL_SELECT, M_BCM1480_MC_CHANNEL_SELECT) -#define K_BCM1480_MC_CHANNEL_SELECT_0 0x1 -#define K_BCM1480_MC_CHANNEL_SELECT_1 0x2 -#define K_BCM1480_MC_CHANNEL_SELECT_2 0x4 -#define K_BCM1480_MC_CHANNEL_SELECT_3 0x8 +#define S_BCM1480_MC_CHANNEL_SELECT 0 +#define M_BCM1480_MC_CHANNEL_SELECT _SB_MAKEMASK(4, S_BCM1480_MC_CHANNEL_SELECT) +#define V_BCM1480_MC_CHANNEL_SELECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CHANNEL_SELECT) +#define G_BCM1480_MC_CHANNEL_SELECT(x) _SB_GETVALUE(x, S_BCM1480_MC_CHANNEL_SELECT, M_BCM1480_MC_CHANNEL_SELECT) +#define K_BCM1480_MC_CHANNEL_SELECT_0 0x1 +#define K_BCM1480_MC_CHANNEL_SELECT_1 0x2 +#define K_BCM1480_MC_CHANNEL_SELECT_2 0x4 +#define K_BCM1480_MC_CHANNEL_SELECT_3 0x8 #endif /* _BCM1480_MC_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_regs.h b/arch/mips/include/asm/sibyte/bcm1480_regs.h index 84d168d..ec0dacf 100644 --- a/arch/mips/include/asm/sibyte/bcm1480_regs.h +++ b/arch/mips/include/asm/sibyte/bcm1480_regs.h @@ -1,7 +1,7 @@ /* ********************************************************************* * BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package * - * Register Definitions File: bcm1480_regs.h + * Register Definitions File: bcm1480_regs.h * * This module contains the addresses of the on-chip peripherals * on the BCM1280 and BCM1480. @@ -80,48 +80,48 @@ * Memory Controller Registers (Section 6) ********************************************************************* */ -#define A_BCM1480_MC_BASE_0 0x0010050000 -#define A_BCM1480_MC_BASE_1 0x0010051000 -#define A_BCM1480_MC_BASE_2 0x0010052000 -#define A_BCM1480_MC_BASE_3 0x0010053000 -#define BCM1480_MC_REGISTER_SPACING 0x1000 +#define A_BCM1480_MC_BASE_0 0x0010050000 +#define A_BCM1480_MC_BASE_1 0x0010051000 +#define A_BCM1480_MC_BASE_2 0x0010052000 +#define A_BCM1480_MC_BASE_3 0x0010053000 +#define BCM1480_MC_REGISTER_SPACING 0x1000 -#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING) +#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING) #define A_BCM1480_MC_REGISTER(ctlid, reg) (A_BCM1480_MC_BASE(ctlid)+(reg)) -#define R_BCM1480_MC_CONFIG 0x0000000100 -#define R_BCM1480_MC_CS_START 0x0000000120 -#define R_BCM1480_MC_CS_END 0x0000000140 -#define S_BCM1480_MC_CS_STARTEND 24 - -#define R_BCM1480_MC_CS01_ROW0 0x0000000180 -#define R_BCM1480_MC_CS01_ROW1 0x00000001A0 -#define R_BCM1480_MC_CS23_ROW0 0x0000000200 -#define R_BCM1480_MC_CS23_ROW1 0x0000000220 -#define R_BCM1480_MC_CS01_COL0 0x0000000280 -#define R_BCM1480_MC_CS01_COL1 0x00000002A0 -#define R_BCM1480_MC_CS23_COL0 0x0000000300 -#define R_BCM1480_MC_CS23_COL1 0x0000000320 - -#define R_BCM1480_MC_CSX_BASE 0x0000000180 -#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */ -#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */ -#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */ -#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */ -#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */ - -#define R_BCM1480_MC_CS01_BA 0x0000000380 -#define R_BCM1480_MC_CS23_BA 0x00000003A0 -#define R_BCM1480_MC_DRAMCMD 0x0000000400 -#define R_BCM1480_MC_DRAMMODE 0x0000000420 -#define R_BCM1480_MC_CLOCK_CFG 0x0000000440 -#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG -#define R_BCM1480_MC_TEST_DATA 0x0000000480 -#define R_BCM1480_MC_TEST_ECC 0x00000004A0 -#define R_BCM1480_MC_TIMING1 0x00000004C0 -#define R_BCM1480_MC_TIMING2 0x00000004E0 -#define R_BCM1480_MC_DLL_CFG 0x0000000500 -#define R_BCM1480_MC_DRIVE_CFG 0x0000000520 +#define R_BCM1480_MC_CONFIG 0x0000000100 +#define R_BCM1480_MC_CS_START 0x0000000120 +#define R_BCM1480_MC_CS_END 0x0000000140 +#define S_BCM1480_MC_CS_STARTEND 24 + +#define R_BCM1480_MC_CS01_ROW0 0x0000000180 +#define R_BCM1480_MC_CS01_ROW1 0x00000001A0 +#define R_BCM1480_MC_CS23_ROW0 0x0000000200 +#define R_BCM1480_MC_CS23_ROW1 0x0000000220 +#define R_BCM1480_MC_CS01_COL0 0x0000000280 +#define R_BCM1480_MC_CS01_COL1 0x00000002A0 +#define R_BCM1480_MC_CS23_COL0 0x0000000300 +#define R_BCM1480_MC_CS23_COL1 0x0000000320 + +#define R_BCM1480_MC_CSX_BASE 0x0000000180 +#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */ +#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */ +#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */ +#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */ +#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */ + +#define R_BCM1480_MC_CS01_BA 0x0000000380 +#define R_BCM1480_MC_CS23_BA 0x00000003A0 +#define R_BCM1480_MC_DRAMCMD 0x0000000400 +#define R_BCM1480_MC_DRAMMODE 0x0000000420 +#define R_BCM1480_MC_CLOCK_CFG 0x0000000440 +#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG +#define R_BCM1480_MC_TEST_DATA 0x0000000480 +#define R_BCM1480_MC_TEST_ECC 0x00000004A0 +#define R_BCM1480_MC_TIMING1 0x00000004C0 +#define R_BCM1480_MC_TIMING2 0x00000004E0 +#define R_BCM1480_MC_DLL_CFG 0x0000000500 +#define R_BCM1480_MC_DRIVE_CFG 0x0000000520 #if SIBYTE_HDR_FEATURE(1480, PASS2) #define R_BCM1480_MC_ODT 0x0000000460 @@ -129,55 +129,55 @@ #endif /* Global registers (single instance) */ -#define A_BCM1480_MC_GLB_CONFIG 0x0010054100 -#define A_BCM1480_MC_GLB_INTLV 0x0010054120 -#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140 -#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160 -#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180 +#define A_BCM1480_MC_GLB_CONFIG 0x0010054100 +#define A_BCM1480_MC_GLB_INTLV 0x0010054120 +#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140 +#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160 +#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180 #define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0 /* ********************************************************************* * L2 Cache Control Registers (Section 5) ********************************************************************* */ -#define A_BCM1480_L2_BASE 0x0010040000 +#define A_BCM1480_L2_BASE 0x0010040000 -#define A_BCM1480_L2_READ_TAG 0x0010040018 -#define A_BCM1480_L2_ECC_TAG 0x0010040038 -#define A_BCM1480_L2_MISC0_VALUE 0x0010040058 -#define A_BCM1480_L2_MISC1_VALUE 0x0010040078 -#define A_BCM1480_L2_MISC2_VALUE 0x0010040098 -#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */ -#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */ +#define A_BCM1480_L2_READ_TAG 0x0010040018 +#define A_BCM1480_L2_ECC_TAG 0x0010040038 +#define A_BCM1480_L2_MISC0_VALUE 0x0010040058 +#define A_BCM1480_L2_MISC1_VALUE 0x0010040078 +#define A_BCM1480_L2_MISC2_VALUE 0x0010040098 +#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */ +#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */ #define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12)) -#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */ -#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */ +#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */ +#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */ #define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12)) #define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12)) #define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12)) #define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12)) -#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */ -#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */ -#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */ -#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */ -#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */ -#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */ +#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */ +#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */ +#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */ +#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */ +#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */ +#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */ #define A_BCM1480_L2_WAY_ENABLE(A, banks) (A | (((~(banks))&0x0F) << 8)) -#define A_BCM1480_L2_BANK_BASE 0x00D0300000 -#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17)) -#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000 +#define A_BCM1480_L2_BANK_BASE 0x00D0300000 +#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17)) +#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000 /* ********************************************************************* * PCI-X Interface Registers (Section 7) ********************************************************************* */ -#define A_BCM1480_PCI_BASE 0x0010061400 +#define A_BCM1480_PCI_BASE 0x0010061400 -#define A_BCM1480_PCI_RESET 0x0010061400 -#define A_BCM1480_PCI_DLL 0x0010061500 +#define A_BCM1480_PCI_RESET 0x0010061400 +#define A_BCM1480_PCI_DLL 0x0010061500 -#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000 +#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000 /* ********************************************************************* * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6) @@ -185,19 +185,19 @@ /* No register changes with Rev.C BCM1250, but one additional MAC */ -#define A_BCM1480_MAC_BASE_2 0x0010066000 +#define A_BCM1480_MAC_BASE_2 0x0010066000 #ifndef A_MAC_BASE_2 -#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2 +#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2 #endif -#define A_BCM1480_MAC_BASE_3 0x0010067000 -#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3 +#define A_BCM1480_MAC_BASE_3 0x0010067000 +#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3 -#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038 +#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038 #ifndef R_MAC_DMA_OODPKTLOST -#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST +#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST #endif @@ -208,18 +208,18 @@ /* No significant differences from BCM1250, two DUARTs */ /* Conventions, per user manual: - * DUART generic, channels A,B,C,D - * DUART0 implementing channels A,B - * DUART1 inplementing channels C,D + * DUART generic, channels A,B,C,D + * DUART0 implementing channels A,B + * DUART1 inplementing channels C,D */ -#define BCM1480_DUART_NUM_PORTS 4 +#define BCM1480_DUART_NUM_PORTS 4 -#define A_BCM1480_DUART0 0x0010060000 -#define A_BCM1480_DUART1 0x0010060400 -#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1) +#define A_BCM1480_DUART0 0x0010060000 +#define A_BCM1480_DUART1 0x0010060400 +#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1) -#define BCM1480_DUART_CHANREG_SPACING 0x100 +#define BCM1480_DUART_CHANREG_SPACING 0x100 #define A_BCM1480_DUART_CHANREG(chan, reg) \ (A_BCM1480_DUART(chan) + \ BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg)) @@ -249,43 +249,43 @@ * These constants are the absolute addresses. */ -#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400 -#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410 -#define A_BCM1480_DUART_STATUS_C 0x0010060420 -#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430 -#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440 -#define A_BCM1480_DUART_CMD_C 0x0010060450 -#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460 -#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470 -#define A_BCM1480_DUART_OPCR_C 0x0010060480 -#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490 - -#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500 -#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510 -#define A_BCM1480_DUART_STATUS_D 0x0010060520 -#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530 -#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540 -#define A_BCM1480_DUART_CMD_D 0x0010060550 -#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560 -#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570 -#define A_BCM1480_DUART_OPCR_D 0x0010060580 -#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590 - -#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600 -#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610 -#define A_BCM1480_DUART_ISR_C 0x0010060620 -#define A_BCM1480_DUART_IMR_C 0x0010060630 -#define A_BCM1480_DUART_ISR_D 0x0010060640 -#define A_BCM1480_DUART_IMR_D 0x0010060650 -#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660 -#define A_BCM1480_DUART_OPCR_CD 0x0010060670 -#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680 -#define A_BCM1480_DUART_ISR_CD 0x0010060690 -#define A_BCM1480_DUART_IMR_CD 0x00100606A0 -#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0 -#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0 -#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0 -#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0 +#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400 +#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410 +#define A_BCM1480_DUART_STATUS_C 0x0010060420 +#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430 +#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440 +#define A_BCM1480_DUART_CMD_C 0x0010060450 +#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460 +#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470 +#define A_BCM1480_DUART_OPCR_C 0x0010060480 +#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490 + +#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500 +#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510 +#define A_BCM1480_DUART_STATUS_D 0x0010060520 +#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530 +#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540 +#define A_BCM1480_DUART_CMD_D 0x0010060550 +#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560 +#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570 +#define A_BCM1480_DUART_OPCR_D 0x0010060580 +#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590 + +#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600 +#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610 +#define A_BCM1480_DUART_ISR_C 0x0010060620 +#define A_BCM1480_DUART_IMR_C 0x0010060630 +#define A_BCM1480_DUART_ISR_D 0x0010060640 +#define A_BCM1480_DUART_IMR_D 0x0010060650 +#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660 +#define A_BCM1480_DUART_OPCR_CD 0x0010060670 +#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680 +#define A_BCM1480_DUART_ISR_CD 0x0010060690 +#define A_BCM1480_DUART_IMR_CD 0x00100606A0 +#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0 +#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0 +#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0 +#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0 /* ********************************************************************* @@ -301,8 +301,8 @@ /* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */ -#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78 -#define R_BCM1480_GPIO_INT_ADD_TYPE (-8) +#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78 +#define R_BCM1480_GPIO_INT_ADD_TYPE (-8) #define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE #define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE @@ -321,30 +321,30 @@ /* Watchdog timers */ -#define A_BCM1480_SCD_WDOG_2 0x0010022050 -#define A_BCM1480_SCD_WDOG_3 0x0010022150 +#define A_BCM1480_SCD_WDOG_2 0x0010022050 +#define A_BCM1480_SCD_WDOG_3 0x0010022150 -#define BCM1480_SCD_NUM_WDOGS 4 +#define BCM1480_SCD_NUM_WDOGS 4 -#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100) +#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100) #define A_BCM1480_SCD_WDOG_REGISTER(w, r) (A_BCM1480_SCD_WDOG_BASE(w) + (r)) -#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050 -#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058 -#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060 +#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050 +#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058 +#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060 -#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150 -#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158 -#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160 +#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150 +#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158 +#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160 /* BCM1480 has two additional compare registers */ #define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT -#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00 -#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0 -#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1 -#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10 -#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10 +#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18 /* ********************************************************************* * System Control Registers (Section 4.2) @@ -352,7 +352,7 @@ /* Scratch register in different place */ -#define A_BCM1480_SCD_SCRATCH 0x100200A0 +#define A_BCM1480_SCD_SCRATCH 0x100200A0 /* ********************************************************************* * System Address Trap Registers (Section 4.9) @@ -364,68 +364,68 @@ * System Interrupt Mapper Registers (Sections 4.3-4.5) ********************************************************************* */ -#define A_BCM1480_IMR_CPU0_BASE 0x0010020000 -#define A_BCM1480_IMR_CPU1_BASE 0x0010022000 -#define A_BCM1480_IMR_CPU2_BASE 0x0010024000 -#define A_BCM1480_IMR_CPU3_BASE 0x0010026000 -#define BCM1480_IMR_REGISTER_SPACING 0x2000 +#define A_BCM1480_IMR_CPU0_BASE 0x0010020000 +#define A_BCM1480_IMR_CPU1_BASE 0x0010022000 +#define A_BCM1480_IMR_CPU2_BASE 0x0010024000 +#define A_BCM1480_IMR_CPU3_BASE 0x0010026000 +#define BCM1480_IMR_REGISTER_SPACING 0x2000 #define BCM1480_IMR_REGISTER_SPACING_SHIFT 13 -#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING) +#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING) #define A_BCM1480_IMR_REGISTER(cpu, reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg)) /* Most IMR registers are 128 bits, implemented as non-contiguous 64-bit registers high (_H) and low (_L) */ -#define BCM1480_IMR_HL_SPACING 0x1000 +#define BCM1480_IMR_HL_SPACING 0x1000 -#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010 -#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018 -#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020 -#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028 -#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038 +#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010 +#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018 +#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020 +#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028 +#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038 #define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040 -#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048 -#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0 -#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8 -#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0 -#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0 -#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8 -#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0 -#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100 -#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8 -#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200 -#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64 - -#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010 -#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018 -#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020 -#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028 -#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038 +#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048 +#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0 +#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8 +#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0 +#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0 +#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8 +#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0 +#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100 +#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8 +#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200 +#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64 + +#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010 +#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018 +#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020 +#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028 +#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038 #define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040 -#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100 -#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200 +#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100 +#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200 -#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000 -#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100 -#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200 -#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300 -#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100 +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000 +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100 +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200 +#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300 +#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100 #define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \ - (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING) + (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING) #define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu, reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg)) -#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */ -#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */ +#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */ +#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */ /* * these macros work together to build the address of a mailbox * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2) * for mbox_0_set_cpu2 returns 0x00100240C8 */ -#define R_BCM1480_IMR_MAILBOX_CPU 0x00 -#define R_BCM1480_IMR_MAILBOX_SET 0x08 -#define R_BCM1480_IMR_MAILBOX_CLR 0x10 +#define R_BCM1480_IMR_MAILBOX_CPU 0x00 +#define R_BCM1480_IMR_MAILBOX_SET 0x08 +#define R_BCM1480_IMR_MAILBOX_CLR 0x10 #define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20 #define A_BCM1480_MAILBOX_REGISTER(num, reg, cpu) \ (A_BCM1480_IMR_CPU0_BASE + \ @@ -440,22 +440,22 @@ /* BCM1480 has four more performance counter registers, and two control registers. */ -#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0 +#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0 -#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0 -#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0 -#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8 -#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1 +#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0 +#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0 +#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8 +#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1 -#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0 -#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1 -#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2 -#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3 +#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0 +#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1 +#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2 +#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3 -#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0 -#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8 -#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500 -#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508 +#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0 +#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8 +#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500 +#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508 #define BCM1480_SCD_NUM_PERF_CNT 8 #define BCM1480_SCD_PERF_CNT_SPACING 8 @@ -468,7 +468,7 @@ /* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */ -#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8 +#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8 /* ********************************************************************* * System Debug Controller Registers (Section 19) @@ -497,46 +497,46 @@ #define BCM1480_HT_PORT_SPACING 0x800 #define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING)) -#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000 -#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800 -#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000 -#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000 +#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000 +#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800 +#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000 +#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000 /* ********************************************************************* * Node Controller Registers (Section 9) ********************************************************************* */ -#define A_BCM1480_NC_BASE 0x00DFBD0000 +#define A_BCM1480_NC_BASE 0x00DFBD0000 -#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000 -#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020 -#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040 -#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060 -#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080 -#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0 -#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0 +#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000 +#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020 +#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040 +#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060 +#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080 +#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0 +#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0 -#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0 -#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100 -#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120 +#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0 +#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100 +#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120 #define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140 -#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200 -#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220 -#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240 -#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260 -#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280 -#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0 -#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0 -#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0 -#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300 -#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320 +#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200 +#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220 +#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240 +#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260 +#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280 +#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0 +#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0 +#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0 +#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300 +#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320 #define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000 #define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020 #define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040 -#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060 +#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060 #define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080 @@ -544,43 +544,43 @@ * H&R Block Configuration Registers (Section 12.4) ********************************************************************* */ -#define A_BCM1480_HR_BASE_0 0x00DF820000 -#define A_BCM1480_HR_BASE_1 0x00DF8A0000 -#define A_BCM1480_HR_BASE_2 0x00DF920000 -#define BCM1480_HR_REGISTER_SPACING 0x80000 +#define A_BCM1480_HR_BASE_0 0x00DF820000 +#define A_BCM1480_HR_BASE_1 0x00DF8A0000 +#define A_BCM1480_HR_BASE_2 0x00DF920000 +#define BCM1480_HR_REGISTER_SPACING 0x80000 -#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING)) -#define A_BCM1480_HR_REGISTER(idx, reg) (A_BCM1480_HR_BASE(idx) + (reg)) +#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING)) +#define A_BCM1480_HR_REGISTER(idx, reg) (A_BCM1480_HR_BASE(idx) + (reg)) -#define R_BCM1480_HR_CFG 0x0000000000 +#define R_BCM1480_HR_CFG 0x0000000000 #define R_BCM1480_HR_MAPPING 0x0000010010 -#define BCM1480_HR_RULE_SPACING 0x0000000010 -#define BCM1480_HR_NUM_RULES 16 -#define BCM1480_HR_OP_OFFSET 0x0000000100 -#define BCM1480_HR_TYPE_OFFSET 0x0000000108 -#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING)) -#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING)) +#define BCM1480_HR_RULE_SPACING 0x0000000010 +#define BCM1480_HR_NUM_RULES 16 +#define BCM1480_HR_OP_OFFSET 0x0000000100 +#define BCM1480_HR_TYPE_OFFSET 0x0000000108 +#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING)) +#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING)) -#define BCM1480_HR_LEAF_SPACING 0x0000000010 -#define BCM1480_HR_NUM_LEAVES 10 -#define BCM1480_HR_LEAF_OFFSET 0x0000000300 -#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING)) +#define BCM1480_HR_LEAF_SPACING 0x0000000010 +#define BCM1480_HR_NUM_LEAVES 10 +#define BCM1480_HR_LEAF_OFFSET 0x0000000300 +#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING)) -#define R_BCM1480_HR_EX_LEAF0 0x00000003A0 +#define R_BCM1480_HR_EX_LEAF0 0x00000003A0 -#define BCM1480_HR_PATH_SPACING 0x0000000010 -#define BCM1480_HR_NUM_PATHS 16 -#define BCM1480_HR_PATH_OFFSET 0x0000000600 -#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING)) +#define BCM1480_HR_PATH_SPACING 0x0000000010 +#define BCM1480_HR_NUM_PATHS 16 +#define BCM1480_HR_PATH_OFFSET 0x0000000600 +#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING)) -#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700 +#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700 -#define BCM1480_HR_ROUTE_SPACING 8 -#define BCM1480_HR_NUM_ROUTES 512 -#define BCM1480_HR_ROUTE_OFFSET 0x0000001000 -#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING)) +#define BCM1480_HR_ROUTE_SPACING 8 +#define BCM1480_HR_NUM_ROUTES 512 +#define BCM1480_HR_ROUTE_OFFSET 0x0000001000 +#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING)) /* checked to here - ehs */ @@ -588,55 +588,55 @@ * Packet Manager DMA Registers (Section 12.5) ********************************************************************* */ -#define A_BCM1480_PM_BASE 0x0010056000 +#define A_BCM1480_PM_BASE 0x0010056000 -#define A_BCM1480_PMI_LCL_0 0x0010058000 -#define A_BCM1480_PMO_LCL_0 0x001005C000 -#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE) -#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE) +#define A_BCM1480_PMI_LCL_0 0x0010058000 +#define A_BCM1480_PMO_LCL_0 0x001005C000 +#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE) +#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE) -#define BCM1480_PM_LCL_REGISTER_SPACING 0x100 -#define BCM1480_PM_NUM_CHANNELS 32 +#define BCM1480_PM_LCL_REGISTER_SPACING 0x100 +#define BCM1480_PM_NUM_CHANNELS 32 -#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING)) -#define A_BCM1480_PMI_LCL_REGISTER(idx, reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg)) -#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING)) -#define A_BCM1480_PMO_LCL_REGISTER(idx, reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg)) +#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING)) +#define A_BCM1480_PMI_LCL_REGISTER(idx, reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg)) +#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING)) +#define A_BCM1480_PMO_LCL_REGISTER(idx, reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg)) -#define BCM1480_PM_INT_PACKING 8 -#define BCM1480_PM_INT_FUNCTION_SPACING 0x40 -#define BCM1480_PM_INT_NUM_FUNCTIONS 3 +#define BCM1480_PM_INT_PACKING 8 +#define BCM1480_PM_INT_FUNCTION_SPACING 0x40 +#define BCM1480_PM_INT_NUM_FUNCTIONS 3 /* * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n) */ -#define R_BCM1480_PM_BASE_SIZE 0x0000000000 -#define R_BCM1480_PM_CNT 0x0000000008 -#define R_BCM1480_PM_PFCNT 0x0000000010 -#define R_BCM1480_PM_LAST 0x0000000018 -#define R_BCM1480_PM_PFINDX 0x0000000020 -#define R_BCM1480_PM_INT_WMK 0x0000000028 -#define R_BCM1480_PM_CONFIG0 0x0000000030 -#define R_BCM1480_PM_LOCALDEBUG 0x0000000078 -#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */ -#define R_BCM1480_PM_INT_CNFG 0x0000000088 -#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090 -#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */ -#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */ +#define R_BCM1480_PM_BASE_SIZE 0x0000000000 +#define R_BCM1480_PM_CNT 0x0000000008 +#define R_BCM1480_PM_PFCNT 0x0000000010 +#define R_BCM1480_PM_LAST 0x0000000018 +#define R_BCM1480_PM_PFINDX 0x0000000020 +#define R_BCM1480_PM_INT_WMK 0x0000000028 +#define R_BCM1480_PM_CONFIG0 0x0000000030 +#define R_BCM1480_PM_LOCALDEBUG 0x0000000078 +#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */ +#define R_BCM1480_PM_INT_CNFG 0x0000000088 +#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090 +#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */ +#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */ /* * Global Registers (Not Channelized) */ -#define A_BCM1480_PMI_GLB_0 0x0010056000 -#define A_BCM1480_PMO_GLB_0 0x0010057000 +#define A_BCM1480_PMI_GLB_0 0x0010056000 +#define A_BCM1480_PMO_GLB_0 0x0010057000 /* * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0 */ -#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */ +#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */ #define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING) @@ -645,32 +645,32 @@ */ -#define A_BCM1480_PMI_INT_0 0x0010056800 -#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8)) -#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE) -#define A_BCM1480_PMO_INT_0 0x0010057800 -#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8)) -#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE) +#define A_BCM1480_PMI_INT_0 0x0010056800 +#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8)) +#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE) +#define A_BCM1480_PMO_INT_0 0x0010057800 +#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8)) +#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE) /* * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0 */ -#define R_BCM1480_PM_INT_ST 0x0000000000 -#define R_BCM1480_PM_INT_MSK 0x0000000040 -#define R_BCM1480_PM_INT_CLR 0x0000000080 -#define R_BCM1480_PM_MRGD_INT 0x00000000C0 +#define R_BCM1480_PM_INT_ST 0x0000000000 +#define R_BCM1480_PM_INT_MSK 0x0000000040 +#define R_BCM1480_PM_INT_CLR 0x0000000080 +#define R_BCM1480_PM_MRGD_INT 0x00000000C0 /* * Debug registers (global) */ #define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000 -#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8 -#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8 +#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8 +#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8 #define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000 -#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8 -#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8 +#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8 +#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8 /* ********************************************************************* * Switch performance counters @@ -715,16 +715,16 @@ * High-Speed Port Registers (Section 13) ********************************************************************* */ -#define A_BCM1480_HSP_BASE_0 0x00DF810000 -#define A_BCM1480_HSP_BASE_1 0x00DF890000 -#define A_BCM1480_HSP_BASE_2 0x00DF910000 -#define BCM1480_HSP_REGISTER_SPACING 0x80000 +#define A_BCM1480_HSP_BASE_0 0x00DF810000 +#define A_BCM1480_HSP_BASE_1 0x00DF890000 +#define A_BCM1480_HSP_BASE_2 0x00DF910000 +#define BCM1480_HSP_REGISTER_SPACING 0x80000 -#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING)) +#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING)) #define A_BCM1480_HSP_REGISTER(idx, reg) (A_BCM1480_HSP_BASE(idx) + (reg)) -#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000 -#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008 +#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000 +#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008 #define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010 #define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018 #define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020 @@ -733,34 +733,34 @@ #define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200 #define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208 -#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800 -#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808 -#define R_BCM1480_HSP_RX_TEST 0x0000000810 -#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818 -#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820 -#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828 -#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830 -#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838 +#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800 +#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808 +#define R_BCM1480_HSP_RX_TEST 0x0000000810 +#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818 +#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820 +#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828 +#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830 +#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838 #define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050 -#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050 +#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058 #define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx)) /* XXX Following registers were shuffled. Renamed/renumbered per errata. */ -#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078 -#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080 -#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088 -#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090 -#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098 -#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098 +#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0 #define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0 #define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8 @@ -772,30 +772,30 @@ #define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8 #define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx)) -#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0 -#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8 -#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100 -#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108 -#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110 -#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118 -#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120 +#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0 +#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8 +#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100 +#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108 +#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110 +#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118 +#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120 -#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000 -#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008 +#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000 +#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008 #define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050 -#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050 +#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058 #define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx)) -#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078 -#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080 -#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088 +#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078 +#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080 +#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088 #define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090 #define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098 #define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0 @@ -805,37 +805,37 @@ #define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0 #define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8 #define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx)) -#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0 -#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8 +#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0 +#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8 #define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx)) -#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100 -#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108 +#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100 +#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108 #define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200 #define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208 -#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800 -#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808 -#define R_BCM1480_HSP_TX_TEST 0x0000040810 +#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800 +#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808 +#define R_BCM1480_HSP_TX_TEST 0x0000040810 -#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840 -#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848 -#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850 -#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860 -#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868 -#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870 -#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878 +#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840 +#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848 +#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850 +#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860 +#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868 +#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870 +#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878 #define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880 #define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888 #define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400 -#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x)) +#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x)) @@ -843,60 +843,60 @@ * Physical Address Map (Table 10 and Figure 7) ********************************************************************* */ -#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) -#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) -#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) -#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) -#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000) -#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000) -#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000) -#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000) -#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000) -#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000) -#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000) -#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000) -#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000) -#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000) -#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) -#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) -#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000) -#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000) -#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000) -#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000) -#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000) -#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000) -#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) -#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) -#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) -#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) -#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) -#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000) -#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) -#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) -#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) -#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) -#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024)) -#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000) -#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000) -#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000) -#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000) -#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000) +#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) +#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) +#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) +#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) +#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000) +#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000) +#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000) +#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000) +#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000) +#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000) +#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000) +#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000) +#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000) +#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000) +#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) +#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) +#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000) +#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000) +#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000) +#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000) +#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000) +#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000) +#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) +#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) +#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) +#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) +#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) +#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000) +#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) +#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) +#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) +#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) +#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024)) +#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000) +#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000) +#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000) +#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000) +#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000) /* ********************************************************************* * L2 Cache as RAM (Table 54) ********************************************************************* */ -#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) -#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8 -#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000) -#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000) -#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000) -#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000) -#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000) -#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000) -#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000) -#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000) -#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000) +#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) +#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8 +#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000) +#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000) +#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000) +#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000) +#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000) +#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000) +#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000) +#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000) +#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000) #endif /* _BCM1480_REGS_H */ diff --git a/arch/mips/include/asm/sibyte/bcm1480_scd.h b/arch/mips/include/asm/sibyte/bcm1480_scd.h index 2af3706..8a1e2b0 100644 --- a/arch/mips/include/asm/sibyte/bcm1480_scd.h +++ b/arch/mips/include/asm/sibyte/bcm1480_scd.h @@ -1,7 +1,7 @@ /* ********************************************************************* * BCM1280/BCM1400 Board Support Package * - * SCD Constants and Macros File: bcm1480_scd.h + * SCD Constants and Macros File: bcm1480_scd.h * * This module contains constants and macros useful for * manipulating the System Control and Debug module. @@ -74,11 +74,11 @@ * New part definitions */ -#define K_SYS_PART_BCM1480 0x1406 -#define K_SYS_PART_BCM1280 0x1206 -#define K_SYS_PART_BCM1455 0x1407 -#define K_SYS_PART_BCM1255 0x1257 -#define K_SYS_PART_BCM1158 0x1156 +#define K_SYS_PART_BCM1480 0x1406 +#define K_SYS_PART_BCM1280 0x1206 +#define K_SYS_PART_BCM1455 0x1407 +#define K_SYS_PART_BCM1255 0x1257 +#define K_SYS_PART_BCM1158 0x1156 /* * Manufacturing Information Register (Table 14) @@ -91,73 +91,73 @@ * Entire register is different from 1250, all new constants below */ -#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0) -#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1) -#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2) -#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3) -#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4) -#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5) - -#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6) -#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV) -#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV) -#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV) - -#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11) -#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV) -#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV) -#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV) - -#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) -#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17) - -#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18) -#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE) -#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE) -#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE) -#define K_BCM1480_SYS_BOOT_MODE_ROM32 0 -#define K_BCM1480_SYS_BOOT_MODE_ROM8 1 +#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0) +#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1) +#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2) +#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3) +#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4) +#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5) + +#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6) +#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV) +#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV) +#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV) + +#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11) +#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV) +#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV) +#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV) + +#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) +#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17) + +#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18) +#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE) +#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE) +#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE) +#define K_BCM1480_SYS_BOOT_MODE_ROM32 0 +#define K_BCM1480_SYS_BOOT_MODE_ROM8 1 #define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2 #define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3 -#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19) - -#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20) -#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21) -#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) -#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23) -#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24) -#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25) - -#define S_BCM1480_SYS_CONFIG 26 -#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG) -#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG) -#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG) - -#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32, 15) - -#define S_BCM1480_SYS_NODEID 47 -#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID) -#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID) -#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID) - -#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51) -#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52) -#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53) -#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54) -#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55) -#define S_BCM1480_SYS_DISABLECPU0 56 -#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0) -#define S_BCM1480_SYS_DISABLECPU1 57 -#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1) -#define S_BCM1480_SYS_DISABLECPU2 58 -#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2) -#define S_BCM1480_SYS_DISABLECPU3 59 -#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3) - -#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60) -#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61) -#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62) -#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63) +#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19) + +#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20) +#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21) +#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) +#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23) +#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24) +#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25) + +#define S_BCM1480_SYS_CONFIG 26 +#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG) +#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG) +#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG) + +#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32, 15) + +#define S_BCM1480_SYS_NODEID 47 +#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID) +#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID) +#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID) + +#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51) +#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52) +#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53) +#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54) +#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55) +#define S_BCM1480_SYS_DISABLECPU0 56 +#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0) +#define S_BCM1480_SYS_DISABLECPU1 57 +#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1) +#define S_BCM1480_SYS_DISABLECPU2 58 +#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2) +#define S_BCM1480_SYS_DISABLECPU3 59 +#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3) + +#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60) +#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61) +#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62) +#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63) /* * Scratch Register (Table 16) @@ -193,23 +193,23 @@ * Registers: SCD_WDOG_CFG_x */ -#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0) +#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0) -#define S_BCM1480_SCD_WDOG_RESET_TYPE 2 -#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE) +#define S_BCM1480_SCD_WDOG_RESET_TYPE 2 +#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE) #define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE) #define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE) -#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ -#define K_BCM1480_SCD_WDOG_RESET_SOFT 1 -#define K_BCM1480_SCD_WDOG_RESET_CPU0 3 -#define K_BCM1480_SCD_WDOG_RESET_CPU1 5 -#define K_BCM1480_SCD_WDOG_RESET_CPU2 9 -#define K_BCM1480_SCD_WDOG_RESET_CPU3 17 +#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ +#define K_BCM1480_SCD_WDOG_RESET_SOFT 1 +#define K_BCM1480_SCD_WDOG_RESET_CPU0 3 +#define K_BCM1480_SCD_WDOG_RESET_CPU1 5 +#define K_BCM1480_SCD_WDOG_RESET_CPU2 9 +#define K_BCM1480_SCD_WDOG_RESET_CPU3 17 #define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31 -#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8) +#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8) /* * General Timer Initial Count Registers (Table 26) @@ -243,32 +243,32 @@ * The clear/enable bits are in different locations on the 1250 and 1480. */ -#define S_SPC_CFG_SRC4 32 -#define M_SPC_CFG_SRC4 _SB_MAKEMASK(8, S_SPC_CFG_SRC4) -#define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC4) -#define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4) +#define S_SPC_CFG_SRC4 32 +#define M_SPC_CFG_SRC4 _SB_MAKEMASK(8, S_SPC_CFG_SRC4) +#define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC4) +#define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4) -#define S_SPC_CFG_SRC5 40 -#define M_SPC_CFG_SRC5 _SB_MAKEMASK(8, S_SPC_CFG_SRC5) -#define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC5) -#define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5) +#define S_SPC_CFG_SRC5 40 +#define M_SPC_CFG_SRC5 _SB_MAKEMASK(8, S_SPC_CFG_SRC5) +#define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC5) +#define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5) -#define S_SPC_CFG_SRC6 48 -#define M_SPC_CFG_SRC6 _SB_MAKEMASK(8, S_SPC_CFG_SRC6) -#define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC6) -#define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6) +#define S_SPC_CFG_SRC6 48 +#define M_SPC_CFG_SRC6 _SB_MAKEMASK(8, S_SPC_CFG_SRC6) +#define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC6) +#define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6) -#define S_SPC_CFG_SRC7 56 -#define M_SPC_CFG_SRC7 _SB_MAKEMASK(8, S_SPC_CFG_SRC7) -#define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC7) -#define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7) +#define S_SPC_CFG_SRC7 56 +#define M_SPC_CFG_SRC7 _SB_MAKEMASK(8, S_SPC_CFG_SRC7) +#define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC7) +#define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7) /* * System Performance Counter Control Register (Table 32) * Register: PERF_CNT_CFG_1 * BCM1480 specific */ -#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0) +#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0) #define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1) #if SIBYTE_HDR_FEATURE_CHIP(1480) #define M_SPC_CFG_CLEAR M_BCM1480_SPC_CFG_CLEAR @@ -280,12 +280,12 @@ * Registers: PERF_CNT_x */ -#define S_BCM1480_SPC_CNT_COUNT 0 -#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT) -#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT) -#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT) +#define S_BCM1480_SPC_CNT_COUNT 0 +#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT) +#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT) +#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT) -#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40) +#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40) /* @@ -325,45 +325,45 @@ #define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4, 0) #define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40, 0) -#define S_BCM1480_ATRAP_CFG_CNT 0 -#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT) -#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT) -#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT) +#define S_BCM1480_ATRAP_CFG_CNT 0 +#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT) +#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT) +#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT) #define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) -#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4) -#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5) +#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4) +#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5) #define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) #define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) -#define S_BCM1480_ATRAP_CFG_AGENTID 8 -#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID) -#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID) -#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID) +#define S_BCM1480_ATRAP_CFG_AGENTID 8 +#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID) +#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID) +#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID) -#define K_BCM1480_BUS_AGENT_CPU0 0 -#define K_BCM1480_BUS_AGENT_CPU1 1 -#define K_BCM1480_BUS_AGENT_NC 2 -#define K_BCM1480_BUS_AGENT_IOB 3 -#define K_BCM1480_BUS_AGENT_SCD 4 -#define K_BCM1480_BUS_AGENT_L2C 6 -#define K_BCM1480_BUS_AGENT_MC 7 -#define K_BCM1480_BUS_AGENT_CPU2 8 -#define K_BCM1480_BUS_AGENT_CPU3 9 -#define K_BCM1480_BUS_AGENT_PM 10 +#define K_BCM1480_BUS_AGENT_CPU0 0 +#define K_BCM1480_BUS_AGENT_CPU1 1 +#define K_BCM1480_BUS_AGENT_NC 2 +#define K_BCM1480_BUS_AGENT_IOB 3 +#define K_BCM1480_BUS_AGENT_SCD 4 +#define K_BCM1480_BUS_AGENT_L2C 6 +#define K_BCM1480_BUS_AGENT_MC 7 +#define K_BCM1480_BUS_AGENT_CPU2 8 +#define K_BCM1480_BUS_AGENT_CPU3 9 +#define K_BCM1480_BUS_AGENT_PM 10 -#define S_BCM1480_ATRAP_CFG_CATTR 12 -#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR) -#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR) -#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR) +#define S_BCM1480_ATRAP_CFG_CATTR 12 +#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR) +#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR) +#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR) #define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0 -#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1 +#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1 #define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2 #define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3 -#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14) +#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14) /* @@ -381,10 +381,10 @@ #define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25) -#define S_BCM1480_SCD_TRSEQ_SWFUNC 26 -#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC) -#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC) -#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC) +#define S_BCM1480_SCD_TRSEQ_SWFUNC 26 +#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC) +#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC) +#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC) /* * Trace Control Register (Table 49) @@ -394,13 +394,13 @@ * are defined below. */ -#define S_BCM1480_SCD_TRACE_CFG_MODE 16 -#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE) -#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE) -#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE) +#define S_BCM1480_SCD_TRACE_CFG_MODE 16 +#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE) +#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE) +#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE) #define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0 -#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1 +#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1 #define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2 #endif /* _BCM1480_SCD_H */ diff --git a/arch/mips/include/asm/sibyte/bigsur.h b/arch/mips/include/asm/sibyte/bigsur.h index 2d1a26d..ae29dae 100644 --- a/arch/mips/include/asm/sibyte/bigsur.h +++ b/arch/mips/include/asm/sibyte/bigsur.h @@ -24,25 +24,25 @@ #ifdef CONFIG_SIBYTE_BIGSUR #define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)" #define SIBYTE_HAVE_PCMCIA 1 -#define SIBYTE_HAVE_IDE 1 +#define SIBYTE_HAVE_IDE 1 #endif /* Generic bus chip selects */ -#define LEDS_CS 3 -#define LEDS_PHYS 0x100a0000 +#define LEDS_CS 3 +#define LEDS_PHYS 0x100a0000 #ifdef SIBYTE_HAVE_IDE -#define IDE_CS 4 -#define IDE_PHYS 0x100b0000 -#define K_GPIO_GB_IDE 4 -#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) +#define IDE_CS 4 +#define IDE_PHYS 0x100b0000 +#define K_GPIO_GB_IDE 4 +#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) #endif #ifdef SIBYTE_HAVE_PCMCIA -#define PCMCIA_CS 6 -#define PCMCIA_PHYS 0x11000000 +#define PCMCIA_CS 6 +#define PCMCIA_PHYS 0x11000000 #define K_GPIO_PC_READY 9 -#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY) +#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY) #endif #endif /* __ASM_SIBYTE_BIGSUR_H */ diff --git a/arch/mips/include/asm/sibyte/carmel.h b/arch/mips/include/asm/sibyte/carmel.h index 11cad71..793edba 100644 --- a/arch/mips/include/asm/sibyte/carmel.h +++ b/arch/mips/include/asm/sibyte/carmel.h @@ -23,35 +23,35 @@ #define SIBYTE_BOARD_NAME "Carmel" -#define GPIO_PHY_INTERRUPT 2 -#define GPIO_NONMASKABLE_INT 3 -#define GPIO_CF_INSERTED 6 -#define GPIO_MONTEREY_RESET 7 -#define GPIO_QUADUART_INT 8 -#define GPIO_CF_INT 9 -#define GPIO_FPGA_CCLK 10 -#define GPIO_FPGA_DOUT 11 -#define GPIO_FPGA_DIN 12 -#define GPIO_FPGA_PGM 13 -#define GPIO_FPGA_DONE 14 -#define GPIO_FPGA_INIT 15 +#define GPIO_PHY_INTERRUPT 2 +#define GPIO_NONMASKABLE_INT 3 +#define GPIO_CF_INSERTED 6 +#define GPIO_MONTEREY_RESET 7 +#define GPIO_QUADUART_INT 8 +#define GPIO_CF_INT 9 +#define GPIO_FPGA_CCLK 10 +#define GPIO_FPGA_DOUT 11 +#define GPIO_FPGA_DIN 12 +#define GPIO_FPGA_PGM 13 +#define GPIO_FPGA_DONE 14 +#define GPIO_FPGA_INIT 15 -#define LEDS_CS 2 -#define LEDS_PHYS 0x100C0000 -#define MLEDS_CS 3 -#define MLEDS_PHYS 0x100A0000 -#define UART_CS 4 -#define UART_PHYS 0x100D0000 -#define ARAVALI_CS 5 -#define ARAVALI_PHYS 0x11000000 -#define IDE_CS 6 -#define IDE_PHYS 0x100B0000 -#define ARAVALI2_CS 7 -#define ARAVALI2_PHYS 0x100E0000 +#define LEDS_CS 2 +#define LEDS_PHYS 0x100C0000 +#define MLEDS_CS 3 +#define MLEDS_PHYS 0x100A0000 +#define UART_CS 4 +#define UART_PHYS 0x100D0000 +#define ARAVALI_CS 5 +#define ARAVALI_PHYS 0x11000000 +#define IDE_CS 6 +#define IDE_PHYS 0x100B0000 +#define ARAVALI2_CS 7 +#define ARAVALI2_PHYS 0x100E0000 #if defined(CONFIG_SIBYTE_CARMEL) -#define K_GPIO_GB_IDE 9 -#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) +#define K_GPIO_GB_IDE 9 +#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) #endif diff --git a/arch/mips/include/asm/sibyte/sb1250.h b/arch/mips/include/asm/sibyte/sb1250.h index 80c1a05..d45dff9 100644 --- a/arch/mips/include/asm/sibyte/sb1250.h +++ b/arch/mips/include/asm/sibyte/sb1250.h @@ -27,8 +27,8 @@ #define SB1250_NR_IRQS 64 -#define BCM1480_NR_IRQS 128 -#define BCM1480_NR_IRQS_HALF 64 +#define BCM1480_NR_IRQS 128 +#define BCM1480_NR_IRQS_HALF 64 #define SB1250_DUART_MINOR_BASE 64 diff --git a/arch/mips/include/asm/sibyte/sb1250_defs.h b/arch/mips/include/asm/sibyte/sb1250_defs.h index 09365f9..4364eb8 100644 --- a/arch/mips/include/asm/sibyte/sb1250_defs.h +++ b/arch/mips/include/asm/sibyte/sb1250_defs.h @@ -51,15 +51,15 @@ * * Use like: * - * #define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_112x_PASS1 + * #define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_112x_PASS1 * * Generate defines only for that revision of chip. * - * #if SIBYTE_HDR_FEATURE(chip,pass) + * #if SIBYTE_HDR_FEATURE(chip,pass) * * True if header features for that revision or later of - * that particular chip type are enabled in SIBYTE_HDR_FEATURES. - * (Use this to bracket #defines for features present in a given + * that particular chip type are enabled in SIBYTE_HDR_FEATURES. + * (Use this to bracket #defines for features present in a given * revision and later.) * * Note that there is no implied ordering between chip types. @@ -69,12 +69,12 @@ * SIBYTE_HDR_FEATURE(112x, PASS1) is OK, but * SIBYTE_HDR_FEATURE(1120, pass1) is not (for two reasons). * - * #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass) + * #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass) * * Same as SIBYTE_HDR_FEATURE, but true for the named revision * and earlier revisions of the named chip type. * - * #if SIBYTE_HDR_FEATURE_EXACT(chip,pass) + * #if SIBYTE_HDR_FEATURE_EXACT(chip,pass) * * Same as SIBYTE_HDR_FEATURE, but only true for the named * revision of the named chip type. (Note that this CANNOT @@ -82,7 +82,7 @@ * particular chip/revision. It will be true any time this * chip/revision is included in SIBYTE_HDR_FEATURES.) * - * #if SIBYTE_HDR_FEATURE_CHIP(chip) + * #if SIBYTE_HDR_FEATURE_CHIP(chip) * * True if header features for (any revision of) that chip type * are enabled in SIBYTE_HDR_FEATURES. (Use this to bracket @@ -95,47 +95,47 @@ * ordering, so be careful when adding support for new minor revs. ********************************************************************* */ -#define SIBYTE_HDR_FMASK_1250_ALL 0x000000ff -#define SIBYTE_HDR_FMASK_1250_PASS1 0x00000001 -#define SIBYTE_HDR_FMASK_1250_PASS2 0x00000002 -#define SIBYTE_HDR_FMASK_1250_PASS3 0x00000004 +#define SIBYTE_HDR_FMASK_1250_ALL 0x000000ff +#define SIBYTE_HDR_FMASK_1250_PASS1 0x00000001 +#define SIBYTE_HDR_FMASK_1250_PASS2 0x00000002 +#define SIBYTE_HDR_FMASK_1250_PASS3 0x00000004 -#define SIBYTE_HDR_FMASK_112x_ALL 0x00000f00 -#define SIBYTE_HDR_FMASK_112x_PASS1 0x00000100 +#define SIBYTE_HDR_FMASK_112x_ALL 0x00000f00 +#define SIBYTE_HDR_FMASK_112x_PASS1 0x00000100 #define SIBYTE_HDR_FMASK_1480_ALL 0x0000f000 #define SIBYTE_HDR_FMASK_1480_PASS1 0x00001000 #define SIBYTE_HDR_FMASK_1480_PASS2 0x00002000 -/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */ -#define SIBYTE_HDR_FMASK(chip, pass) \ +/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */ +#define SIBYTE_HDR_FMASK(chip, pass) \ (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass) -#define SIBYTE_HDR_FMASK_ALLREVS(chip) \ +#define SIBYTE_HDR_FMASK_ALLREVS(chip) \ (SIBYTE_HDR_FMASK_ ## chip ## _ALL) /* Default constant value for all chips, all revisions */ -#define SIBYTE_HDR_FMASK_ALL \ +#define SIBYTE_HDR_FMASK_ALL \ (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \ | SIBYTE_HDR_FMASK_1480_ALL) /* This one is used for the "original" BCM1250/BCM112x chips. We use this to weed out constants and macros that do not exist on later chips like - the BCM1480 */ + the BCM1480 */ #define SIBYTE_HDR_FMASK_1250_112x_ALL \ (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL) #define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL #ifndef SIBYTE_HDR_FEATURES -#define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_ALL +#define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_ALL #endif /* Bit mask for revisions of chip exclusively before the named revision. */ -#define SIBYTE_HDR_FMASK_BEFORE(chip, pass) \ +#define SIBYTE_HDR_FMASK_BEFORE(chip, pass) \ ((SIBYTE_HDR_FMASK(chip, pass) - 1) & SIBYTE_HDR_FMASK_ALLREVS(chip)) -/* Bit mask for revisions of chip exclusively after the named revision. */ -#define SIBYTE_HDR_FMASK_AFTER(chip, pass) \ +/* Bit mask for revisions of chip exclusively after the named revision. */ +#define SIBYTE_HDR_FMASK_AFTER(chip, pass) \ (~(SIBYTE_HDR_FMASK(chip, pass) \ | (SIBYTE_HDR_FMASK(chip, pass) - 1)) & SIBYTE_HDR_FMASK_ALLREVS(chip)) @@ -168,38 +168,38 @@ /* ********************************************************************* * Naming schemes for constants in these files: * - * M_xxx MASK constant (identifies bits in a register). - * For multi-bit fields, all bits in the field will - * be set. + * M_xxx MASK constant (identifies bits in a register). + * For multi-bit fields, all bits in the field will + * be set. * - * K_xxx "Code" constant (value for data in a multi-bit - * field). The value is right justified. + * K_xxx "Code" constant (value for data in a multi-bit + * field). The value is right justified. * - * V_xxx "Value" constant. This is the same as the - * corresponding "K_xxx" constant, except it is - * shifted to the correct position in the register. + * V_xxx "Value" constant. This is the same as the + * corresponding "K_xxx" constant, except it is + * shifted to the correct position in the register. * - * S_xxx SHIFT constant. This is the number of bits that - * a field value (code) needs to be shifted - * (towards the left) to put the value in the right - * position for the register. + * S_xxx SHIFT constant. This is the number of bits that + * a field value (code) needs to be shifted + * (towards the left) to put the value in the right + * position for the register. * - * A_xxx ADDRESS constant. This will be a physical - * address. Use the PHYS_TO_K1 macro to generate - * a K1SEG address. + * A_xxx ADDRESS constant. This will be a physical + * address. Use the PHYS_TO_K1 macro to generate + * a K1SEG address. * - * R_xxx RELATIVE offset constant. This is an offset from - * an A_xxx constant (usually the first register in - * a group). + * R_xxx RELATIVE offset constant. This is an offset from + * an A_xxx constant (usually the first register in + * a group). * - * G_xxx(X) GET value. This macro obtains a multi-bit field - * from a register, masks it, and shifts it to - * the bottom of the register (retrieving a K_xxx - * value, for example). + * G_xxx(X) GET value. This macro obtains a multi-bit field + * from a register, masks it, and shifts it to + * the bottom of the register (retrieving a K_xxx + * value, for example). * - * V_xxx(X) VALUE. This macro computes the value of a - * K_xxx constant shifted to the correct position - * in the register. + * V_xxx(X) VALUE. This macro computes the value of a + * K_xxx constant shifted to the correct position + * in the register. ********************************************************************* */ diff --git a/arch/mips/include/asm/sibyte/sb1250_dma.h b/arch/mips/include/asm/sibyte/sb1250_dma.h index 6c44dfb..ea81713 100644 --- a/arch/mips/include/asm/sibyte/sb1250_dma.h +++ b/arch/mips/include/asm/sibyte/sb1250_dma.h @@ -51,15 +51,15 @@ */ -#define M_DMA_DROP _SB_MAKEMASK1(0) +#define M_DMA_DROP _SB_MAKEMASK1(0) -#define M_DMA_CHAIN_SEL _SB_MAKEMASK1(1) -#define M_DMA_RESERVED1 _SB_MAKEMASK1(2) +#define M_DMA_CHAIN_SEL _SB_MAKEMASK1(1) +#define M_DMA_RESERVED1 _SB_MAKEMASK1(2) #define S_DMA_DESC_TYPE _SB_MAKE64(1) #define M_DMA_DESC_TYPE _SB_MAKEMASK(2, S_DMA_DESC_TYPE) -#define V_DMA_DESC_TYPE(x) _SB_MAKEVALUE(x, S_DMA_DESC_TYPE) -#define G_DMA_DESC_TYPE(x) _SB_GETVALUE(x, S_DMA_DESC_TYPE, M_DMA_DESC_TYPE) +#define V_DMA_DESC_TYPE(x) _SB_MAKEVALUE(x, S_DMA_DESC_TYPE) +#define G_DMA_DESC_TYPE(x) _SB_GETVALUE(x, S_DMA_DESC_TYPE, M_DMA_DESC_TYPE) #define K_DMA_DESC_TYPE_RING_AL 0 #define K_DMA_DESC_TYPE_CHAIN_AL 1 @@ -69,31 +69,31 @@ #define K_DMA_DESC_TYPE_RING_UAL_RMW 3 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define M_DMA_EOP_INT_EN _SB_MAKEMASK1(3) -#define M_DMA_HWM_INT_EN _SB_MAKEMASK1(4) -#define M_DMA_LWM_INT_EN _SB_MAKEMASK1(5) -#define M_DMA_TBX_EN _SB_MAKEMASK1(6) -#define M_DMA_TDX_EN _SB_MAKEMASK1(7) +#define M_DMA_EOP_INT_EN _SB_MAKEMASK1(3) +#define M_DMA_HWM_INT_EN _SB_MAKEMASK1(4) +#define M_DMA_LWM_INT_EN _SB_MAKEMASK1(5) +#define M_DMA_TBX_EN _SB_MAKEMASK1(6) +#define M_DMA_TDX_EN _SB_MAKEMASK1(7) -#define S_DMA_INT_PKTCNT _SB_MAKE64(8) -#define M_DMA_INT_PKTCNT _SB_MAKEMASK(8, S_DMA_INT_PKTCNT) -#define V_DMA_INT_PKTCNT(x) _SB_MAKEVALUE(x, S_DMA_INT_PKTCNT) -#define G_DMA_INT_PKTCNT(x) _SB_GETVALUE(x, S_DMA_INT_PKTCNT, M_DMA_INT_PKTCNT) +#define S_DMA_INT_PKTCNT _SB_MAKE64(8) +#define M_DMA_INT_PKTCNT _SB_MAKEMASK(8, S_DMA_INT_PKTCNT) +#define V_DMA_INT_PKTCNT(x) _SB_MAKEVALUE(x, S_DMA_INT_PKTCNT) +#define G_DMA_INT_PKTCNT(x) _SB_GETVALUE(x, S_DMA_INT_PKTCNT, M_DMA_INT_PKTCNT) -#define S_DMA_RINGSZ _SB_MAKE64(16) -#define M_DMA_RINGSZ _SB_MAKEMASK(16, S_DMA_RINGSZ) -#define V_DMA_RINGSZ(x) _SB_MAKEVALUE(x, S_DMA_RINGSZ) -#define G_DMA_RINGSZ(x) _SB_GETVALUE(x, S_DMA_RINGSZ, M_DMA_RINGSZ) +#define S_DMA_RINGSZ _SB_MAKE64(16) +#define M_DMA_RINGSZ _SB_MAKEMASK(16, S_DMA_RINGSZ) +#define V_DMA_RINGSZ(x) _SB_MAKEVALUE(x, S_DMA_RINGSZ) +#define G_DMA_RINGSZ(x) _SB_GETVALUE(x, S_DMA_RINGSZ, M_DMA_RINGSZ) -#define S_DMA_HIGH_WATERMARK _SB_MAKE64(32) -#define M_DMA_HIGH_WATERMARK _SB_MAKEMASK(16, S_DMA_HIGH_WATERMARK) -#define V_DMA_HIGH_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_HIGH_WATERMARK) -#define G_DMA_HIGH_WATERMARK(x) _SB_GETVALUE(x, S_DMA_HIGH_WATERMARK, M_DMA_HIGH_WATERMARK) +#define S_DMA_HIGH_WATERMARK _SB_MAKE64(32) +#define M_DMA_HIGH_WATERMARK _SB_MAKEMASK(16, S_DMA_HIGH_WATERMARK) +#define V_DMA_HIGH_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_HIGH_WATERMARK) +#define G_DMA_HIGH_WATERMARK(x) _SB_GETVALUE(x, S_DMA_HIGH_WATERMARK, M_DMA_HIGH_WATERMARK) -#define S_DMA_LOW_WATERMARK _SB_MAKE64(48) -#define M_DMA_LOW_WATERMARK _SB_MAKEMASK(16, S_DMA_LOW_WATERMARK) -#define V_DMA_LOW_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_LOW_WATERMARK) -#define G_DMA_LOW_WATERMARK(x) _SB_GETVALUE(x, S_DMA_LOW_WATERMARK, M_DMA_LOW_WATERMARK) +#define S_DMA_LOW_WATERMARK _SB_MAKE64(48) +#define M_DMA_LOW_WATERMARK _SB_MAKEMASK(16, S_DMA_LOW_WATERMARK) +#define V_DMA_LOW_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_LOW_WATERMARK) +#define G_DMA_LOW_WATERMARK(x) _SB_GETVALUE(x, S_DMA_LOW_WATERMARK, M_DMA_LOW_WATERMARK) /* * Ethernet and Serial DMA Configuration Register 1 (Table 7-5) @@ -103,11 +103,11 @@ * Registers: DMA_CONFIG1_SER_x_TX */ -#define M_DMA_HDR_CF_EN _SB_MAKEMASK1(0) -#define M_DMA_ASIC_XFR_EN _SB_MAKEMASK1(1) -#define M_DMA_PRE_ADDR_EN _SB_MAKEMASK1(2) -#define M_DMA_FLOW_CTL_EN _SB_MAKEMASK1(3) -#define M_DMA_NO_DSCR_UPDT _SB_MAKEMASK1(4) +#define M_DMA_HDR_CF_EN _SB_MAKEMASK1(0) +#define M_DMA_ASIC_XFR_EN _SB_MAKEMASK1(1) +#define M_DMA_PRE_ADDR_EN _SB_MAKEMASK1(2) +#define M_DMA_FLOW_CTL_EN _SB_MAKEMASK1(3) +#define M_DMA_NO_DSCR_UPDT _SB_MAKEMASK1(4) #define M_DMA_L2CA _SB_MAKEMASK1(5) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) @@ -116,37 +116,37 @@ #define M_DMA_TX_FC_PAUSE_EN _SB_MAKEMASK1(7) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define M_DMA_MBZ1 _SB_MAKEMASK(6, 15) +#define M_DMA_MBZ1 _SB_MAKEMASK(6, 15) -#define S_DMA_HDR_SIZE _SB_MAKE64(21) -#define M_DMA_HDR_SIZE _SB_MAKEMASK(9, S_DMA_HDR_SIZE) -#define V_DMA_HDR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_HDR_SIZE) -#define G_DMA_HDR_SIZE(x) _SB_GETVALUE(x, S_DMA_HDR_SIZE, M_DMA_HDR_SIZE) +#define S_DMA_HDR_SIZE _SB_MAKE64(21) +#define M_DMA_HDR_SIZE _SB_MAKEMASK(9, S_DMA_HDR_SIZE) +#define V_DMA_HDR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_HDR_SIZE) +#define G_DMA_HDR_SIZE(x) _SB_GETVALUE(x, S_DMA_HDR_SIZE, M_DMA_HDR_SIZE) -#define M_DMA_MBZ2 _SB_MAKEMASK(5, 32) +#define M_DMA_MBZ2 _SB_MAKEMASK(5, 32) -#define S_DMA_ASICXFR_SIZE _SB_MAKE64(37) -#define M_DMA_ASICXFR_SIZE _SB_MAKEMASK(9, S_DMA_ASICXFR_SIZE) -#define V_DMA_ASICXFR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_ASICXFR_SIZE) -#define G_DMA_ASICXFR_SIZE(x) _SB_GETVALUE(x, S_DMA_ASICXFR_SIZE, M_DMA_ASICXFR_SIZE) +#define S_DMA_ASICXFR_SIZE _SB_MAKE64(37) +#define M_DMA_ASICXFR_SIZE _SB_MAKEMASK(9, S_DMA_ASICXFR_SIZE) +#define V_DMA_ASICXFR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_ASICXFR_SIZE) +#define G_DMA_ASICXFR_SIZE(x) _SB_GETVALUE(x, S_DMA_ASICXFR_SIZE, M_DMA_ASICXFR_SIZE) -#define S_DMA_INT_TIMEOUT _SB_MAKE64(48) -#define M_DMA_INT_TIMEOUT _SB_MAKEMASK(16, S_DMA_INT_TIMEOUT) -#define V_DMA_INT_TIMEOUT(x) _SB_MAKEVALUE(x, S_DMA_INT_TIMEOUT) -#define G_DMA_INT_TIMEOUT(x) _SB_GETVALUE(x, S_DMA_INT_TIMEOUT, M_DMA_INT_TIMEOUT) +#define S_DMA_INT_TIMEOUT _SB_MAKE64(48) +#define M_DMA_INT_TIMEOUT _SB_MAKEMASK(16, S_DMA_INT_TIMEOUT) +#define V_DMA_INT_TIMEOUT(x) _SB_MAKEVALUE(x, S_DMA_INT_TIMEOUT) +#define G_DMA_INT_TIMEOUT(x) _SB_GETVALUE(x, S_DMA_INT_TIMEOUT, M_DMA_INT_TIMEOUT) /* * Ethernet and Serial DMA Descriptor base address (Table 7-6) */ -#define M_DMA_DSCRBASE_MBZ _SB_MAKEMASK(4, 0) +#define M_DMA_DSCRBASE_MBZ _SB_MAKEMASK(4, 0) /* * ASIC Mode Base Address (Table 7-7) */ -#define M_DMA_ASIC_BASE_MBZ _SB_MAKEMASK(20, 0) +#define M_DMA_ASIC_BASE_MBZ _SB_MAKEMASK(20, 0) /* * DMA Descriptor Count Registers (Table 7-8) @@ -159,10 +159,10 @@ * Current Descriptor Address Register (Table 7-11) */ -#define S_DMA_CURDSCR_ADDR _SB_MAKE64(0) -#define M_DMA_CURDSCR_ADDR _SB_MAKEMASK(40, S_DMA_CURDSCR_ADDR) -#define S_DMA_CURDSCR_COUNT _SB_MAKE64(40) -#define M_DMA_CURDSCR_COUNT _SB_MAKEMASK(16, S_DMA_CURDSCR_COUNT) +#define S_DMA_CURDSCR_ADDR _SB_MAKE64(0) +#define M_DMA_CURDSCR_ADDR _SB_MAKEMASK(40, S_DMA_CURDSCR_ADDR) +#define S_DMA_CURDSCR_COUNT _SB_MAKE64(40) +#define M_DMA_CURDSCR_COUNT _SB_MAKEMASK(16, S_DMA_CURDSCR_COUNT) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_DMA_TX_CH_PAUSE_ON _SB_MAKEMASK1(56) @@ -172,13 +172,13 @@ * Receive Packet Drop Registers */ #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_DMA_OODLOST_RX _SB_MAKE64(0) -#define M_DMA_OODLOST_RX _SB_MAKEMASK(16, S_DMA_OODLOST_RX) -#define G_DMA_OODLOST_RX(x) _SB_GETVALUE(x, S_DMA_OODLOST_RX, M_DMA_OODLOST_RX) +#define S_DMA_OODLOST_RX _SB_MAKE64(0) +#define M_DMA_OODLOST_RX _SB_MAKEMASK(16, S_DMA_OODLOST_RX) +#define G_DMA_OODLOST_RX(x) _SB_GETVALUE(x, S_DMA_OODLOST_RX, M_DMA_OODLOST_RX) -#define S_DMA_EOP_COUNT_RX _SB_MAKE64(16) -#define M_DMA_EOP_COUNT_RX _SB_MAKEMASK(8, S_DMA_EOP_COUNT_RX) -#define G_DMA_EOP_COUNT_RX(x) _SB_GETVALUE(x, S_DMA_EOP_COUNT_RX, M_DMA_EOP_COUNT_RX) +#define S_DMA_EOP_COUNT_RX _SB_MAKE64(16) +#define M_DMA_EOP_COUNT_RX _SB_MAKEMASK(8, S_DMA_EOP_COUNT_RX) +#define G_DMA_EOP_COUNT_RX(x) _SB_GETVALUE(x, S_DMA_EOP_COUNT_RX, M_DMA_EOP_COUNT_RX) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ /* ********************************************************************* @@ -189,26 +189,26 @@ * Descriptor doubleword "A" (Table 7-12) */ -#define S_DMA_DSCRA_OFFSET _SB_MAKE64(0) -#define M_DMA_DSCRA_OFFSET _SB_MAKEMASK(5, S_DMA_DSCRA_OFFSET) -#define V_DMA_DSCRA_OFFSET(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_OFFSET) -#define G_DMA_DSCRA_OFFSET(x) _SB_GETVALUE(x, S_DMA_DSCRA_OFFSET, M_DMA_DSCRA_OFFSET) +#define S_DMA_DSCRA_OFFSET _SB_MAKE64(0) +#define M_DMA_DSCRA_OFFSET _SB_MAKEMASK(5, S_DMA_DSCRA_OFFSET) +#define V_DMA_DSCRA_OFFSET(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_OFFSET) +#define G_DMA_DSCRA_OFFSET(x) _SB_GETVALUE(x, S_DMA_DSCRA_OFFSET, M_DMA_DSCRA_OFFSET) /* Note: Don't shift the address over, just mask it with the mask below */ -#define S_DMA_DSCRA_A_ADDR _SB_MAKE64(5) -#define M_DMA_DSCRA_A_ADDR _SB_MAKEMASK(35, S_DMA_DSCRA_A_ADDR) +#define S_DMA_DSCRA_A_ADDR _SB_MAKE64(5) +#define M_DMA_DSCRA_A_ADDR _SB_MAKEMASK(35, S_DMA_DSCRA_A_ADDR) #define M_DMA_DSCRA_A_ADDR_OFFSET (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_DMA_DSCRA_A_ADDR_UA _SB_MAKE64(0) -#define M_DMA_DSCRA_A_ADDR_UA _SB_MAKEMASK(40, S_DMA_DSCRA_A_ADDR_UA) +#define S_DMA_DSCRA_A_ADDR_UA _SB_MAKE64(0) +#define M_DMA_DSCRA_A_ADDR_UA _SB_MAKEMASK(40, S_DMA_DSCRA_A_ADDR_UA) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define S_DMA_DSCRA_A_SIZE _SB_MAKE64(40) -#define M_DMA_DSCRA_A_SIZE _SB_MAKEMASK(9, S_DMA_DSCRA_A_SIZE) -#define V_DMA_DSCRA_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_A_SIZE) -#define G_DMA_DSCRA_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRA_A_SIZE, M_DMA_DSCRA_A_SIZE) +#define S_DMA_DSCRA_A_SIZE _SB_MAKE64(40) +#define M_DMA_DSCRA_A_SIZE _SB_MAKEMASK(9, S_DMA_DSCRA_A_SIZE) +#define V_DMA_DSCRA_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_A_SIZE) +#define G_DMA_DSCRA_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRA_A_SIZE, M_DMA_DSCRA_A_SIZE) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define S_DMA_DSCRA_DSCR_CNT _SB_MAKE64(40) @@ -216,43 +216,43 @@ #define G_DMA_DSCRA_DSCR_CNT(x) _SB_GETVALUE(x, S_DMA_DSCRA_DSCR_CNT, M_DMA_DSCRA_DSCR_CNT) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define M_DMA_DSCRA_INTERRUPT _SB_MAKEMASK1(49) +#define M_DMA_DSCRA_INTERRUPT _SB_MAKEMASK1(49) #define M_DMA_DSCRA_OFFSETB _SB_MAKEMASK1(50) -#define S_DMA_DSCRA_STATUS _SB_MAKE64(51) -#define M_DMA_DSCRA_STATUS _SB_MAKEMASK(13, S_DMA_DSCRA_STATUS) -#define V_DMA_DSCRA_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_STATUS) -#define G_DMA_DSCRA_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRA_STATUS, M_DMA_DSCRA_STATUS) +#define S_DMA_DSCRA_STATUS _SB_MAKE64(51) +#define M_DMA_DSCRA_STATUS _SB_MAKEMASK(13, S_DMA_DSCRA_STATUS) +#define V_DMA_DSCRA_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_STATUS) +#define G_DMA_DSCRA_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRA_STATUS, M_DMA_DSCRA_STATUS) /* * Descriptor doubleword "B" (Table 7-13) */ -#define S_DMA_DSCRB_OPTIONS _SB_MAKE64(0) -#define M_DMA_DSCRB_OPTIONS _SB_MAKEMASK(4, S_DMA_DSCRB_OPTIONS) -#define V_DMA_DSCRB_OPTIONS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_OPTIONS) -#define G_DMA_DSCRB_OPTIONS(x) _SB_GETVALUE(x, S_DMA_DSCRB_OPTIONS, M_DMA_DSCRB_OPTIONS) +#define S_DMA_DSCRB_OPTIONS _SB_MAKE64(0) +#define M_DMA_DSCRB_OPTIONS _SB_MAKEMASK(4, S_DMA_DSCRB_OPTIONS) +#define V_DMA_DSCRB_OPTIONS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_OPTIONS) +#define G_DMA_DSCRB_OPTIONS(x) _SB_GETVALUE(x, S_DMA_DSCRB_OPTIONS, M_DMA_DSCRB_OPTIONS) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_DMA_DSCRB_A_SIZE _SB_MAKE64(8) -#define M_DMA_DSCRB_A_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_A_SIZE) -#define V_DMA_DSCRB_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_A_SIZE) -#define G_DMA_DSCRB_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_A_SIZE, M_DMA_DSCRB_A_SIZE) +#define S_DMA_DSCRB_A_SIZE _SB_MAKE64(8) +#define M_DMA_DSCRB_A_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_A_SIZE) +#define V_DMA_DSCRB_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_A_SIZE) +#define G_DMA_DSCRB_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_A_SIZE, M_DMA_DSCRB_A_SIZE) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define R_DMA_DSCRB_ADDR _SB_MAKE64(0x10) +#define R_DMA_DSCRB_ADDR _SB_MAKE64(0x10) /* Note: Don't shift the address over, just mask it with the mask below */ -#define S_DMA_DSCRB_B_ADDR _SB_MAKE64(5) -#define M_DMA_DSCRB_B_ADDR _SB_MAKEMASK(35, S_DMA_DSCRB_B_ADDR) +#define S_DMA_DSCRB_B_ADDR _SB_MAKE64(5) +#define M_DMA_DSCRB_B_ADDR _SB_MAKEMASK(35, S_DMA_DSCRB_B_ADDR) -#define S_DMA_DSCRB_B_SIZE _SB_MAKE64(40) -#define M_DMA_DSCRB_B_SIZE _SB_MAKEMASK(9, S_DMA_DSCRB_B_SIZE) -#define V_DMA_DSCRB_B_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_B_SIZE) -#define G_DMA_DSCRB_B_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_B_SIZE, M_DMA_DSCRB_B_SIZE) +#define S_DMA_DSCRB_B_SIZE _SB_MAKE64(40) +#define M_DMA_DSCRB_B_SIZE _SB_MAKEMASK(9, S_DMA_DSCRB_B_SIZE) +#define V_DMA_DSCRB_B_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_B_SIZE) +#define G_DMA_DSCRB_B_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_B_SIZE, M_DMA_DSCRB_B_SIZE) -#define M_DMA_DSCRB_B_VALID _SB_MAKEMASK1(49) +#define M_DMA_DSCRB_B_VALID _SB_MAKEMASK1(49) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define S_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKE64(48) @@ -261,24 +261,24 @@ #define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB, M_DMA_DSCRB_PKT_SIZE_MSB) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define S_DMA_DSCRB_PKT_SIZE _SB_MAKE64(50) -#define M_DMA_DSCRB_PKT_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_PKT_SIZE) -#define V_DMA_DSCRB_PKT_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE) -#define G_DMA_DSCRB_PKT_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE, M_DMA_DSCRB_PKT_SIZE) +#define S_DMA_DSCRB_PKT_SIZE _SB_MAKE64(50) +#define M_DMA_DSCRB_PKT_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_PKT_SIZE) +#define V_DMA_DSCRB_PKT_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE) +#define G_DMA_DSCRB_PKT_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE, M_DMA_DSCRB_PKT_SIZE) /* * from pass2 some bits in dscr_b are also used for rx status */ -#define S_DMA_DSCRB_STATUS _SB_MAKE64(0) -#define M_DMA_DSCRB_STATUS _SB_MAKEMASK(1, S_DMA_DSCRB_STATUS) -#define V_DMA_DSCRB_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_STATUS) -#define G_DMA_DSCRB_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRB_STATUS, M_DMA_DSCRB_STATUS) +#define S_DMA_DSCRB_STATUS _SB_MAKE64(0) +#define M_DMA_DSCRB_STATUS _SB_MAKEMASK(1, S_DMA_DSCRB_STATUS) +#define V_DMA_DSCRB_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_STATUS) +#define G_DMA_DSCRB_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRB_STATUS, M_DMA_DSCRB_STATUS) /* * Ethernet Descriptor Status Bits (Table 7-15) */ -#define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51) +#define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51) #define M_DMA_ETHRX_DSCRERR _SB_MAKEMASK1(52) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) @@ -292,70 +292,70 @@ #define M_DMA_ETH_CRC_FLAG _SB_MAKEMASK1(2) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define S_DMA_ETHRX_RXCH 53 -#define M_DMA_ETHRX_RXCH _SB_MAKEMASK(2, S_DMA_ETHRX_RXCH) -#define V_DMA_ETHRX_RXCH(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_RXCH) -#define G_DMA_ETHRX_RXCH(x) _SB_GETVALUE(x, S_DMA_ETHRX_RXCH, M_DMA_ETHRX_RXCH) +#define S_DMA_ETHRX_RXCH 53 +#define M_DMA_ETHRX_RXCH _SB_MAKEMASK(2, S_DMA_ETHRX_RXCH) +#define V_DMA_ETHRX_RXCH(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_RXCH) +#define G_DMA_ETHRX_RXCH(x) _SB_GETVALUE(x, S_DMA_ETHRX_RXCH, M_DMA_ETHRX_RXCH) -#define S_DMA_ETHRX_PKTTYPE 55 -#define M_DMA_ETHRX_PKTTYPE _SB_MAKEMASK(3, S_DMA_ETHRX_PKTTYPE) -#define V_DMA_ETHRX_PKTTYPE(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_PKTTYPE) -#define G_DMA_ETHRX_PKTTYPE(x) _SB_GETVALUE(x, S_DMA_ETHRX_PKTTYPE, M_DMA_ETHRX_PKTTYPE) +#define S_DMA_ETHRX_PKTTYPE 55 +#define M_DMA_ETHRX_PKTTYPE _SB_MAKEMASK(3, S_DMA_ETHRX_PKTTYPE) +#define V_DMA_ETHRX_PKTTYPE(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_PKTTYPE) +#define G_DMA_ETHRX_PKTTYPE(x) _SB_GETVALUE(x, S_DMA_ETHRX_PKTTYPE, M_DMA_ETHRX_PKTTYPE) #define K_DMA_ETHRX_PKTTYPE_IPV4 0 #define K_DMA_ETHRX_PKTTYPE_ARPV4 1 -#define K_DMA_ETHRX_PKTTYPE_802 2 +#define K_DMA_ETHRX_PKTTYPE_802 2 #define K_DMA_ETHRX_PKTTYPE_OTHER 3 #define K_DMA_ETHRX_PKTTYPE_USER0 4 #define K_DMA_ETHRX_PKTTYPE_USER1 5 #define K_DMA_ETHRX_PKTTYPE_USER2 6 #define K_DMA_ETHRX_PKTTYPE_USER3 7 -#define M_DMA_ETHRX_MATCH_HASH _SB_MAKEMASK1(58) -#define M_DMA_ETHRX_MATCH_EXACT _SB_MAKEMASK1(59) -#define M_DMA_ETHRX_BCAST _SB_MAKEMASK1(60) -#define M_DMA_ETHRX_MCAST _SB_MAKEMASK1(61) -#define M_DMA_ETHRX_BAD _SB_MAKEMASK1(62) -#define M_DMA_ETHRX_SOP _SB_MAKEMASK1(63) +#define M_DMA_ETHRX_MATCH_HASH _SB_MAKEMASK1(58) +#define M_DMA_ETHRX_MATCH_EXACT _SB_MAKEMASK1(59) +#define M_DMA_ETHRX_BCAST _SB_MAKEMASK1(60) +#define M_DMA_ETHRX_MCAST _SB_MAKEMASK1(61) +#define M_DMA_ETHRX_BAD _SB_MAKEMASK1(62) +#define M_DMA_ETHRX_SOP _SB_MAKEMASK1(63) /* * Ethernet Transmit Status Bits (Table 7-16) */ -#define M_DMA_ETHTX_SOP _SB_MAKEMASK1(63) +#define M_DMA_ETHTX_SOP _SB_MAKEMASK1(63) /* * Ethernet Transmit Options (Table 7-17) */ -#define K_DMA_ETHTX_NOTSOP _SB_MAKE64(0x00) -#define K_DMA_ETHTX_APPENDCRC _SB_MAKE64(0x01) -#define K_DMA_ETHTX_REPLACECRC _SB_MAKE64(0x02) +#define K_DMA_ETHTX_NOTSOP _SB_MAKE64(0x00) +#define K_DMA_ETHTX_APPENDCRC _SB_MAKE64(0x01) +#define K_DMA_ETHTX_REPLACECRC _SB_MAKE64(0x02) #define K_DMA_ETHTX_APPENDCRC_APPENDPAD _SB_MAKE64(0x03) #define K_DMA_ETHTX_APPENDVLAN_REPLACECRC _SB_MAKE64(0x04) #define K_DMA_ETHTX_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x05) #define K_DMA_ETHTX_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x6) -#define K_DMA_ETHTX_NOMODS _SB_MAKE64(0x07) -#define K_DMA_ETHTX_RESERVED1 _SB_MAKE64(0x08) +#define K_DMA_ETHTX_NOMODS _SB_MAKE64(0x07) +#define K_DMA_ETHTX_RESERVED1 _SB_MAKE64(0x08) #define K_DMA_ETHTX_REPLACESADDR_APPENDCRC _SB_MAKE64(0x09) #define K_DMA_ETHTX_REPLACESADDR_REPLACECRC _SB_MAKE64(0x0A) #define K_DMA_ETHTX_REPLACESADDR_APPENDCRC_APPENDPAD _SB_MAKE64(0x0B) #define K_DMA_ETHTX_REPLACESADDR_APPENDVLAN_REPLACECRC _SB_MAKE64(0x0C) #define K_DMA_ETHTX_REPLACESADDR_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x0D) #define K_DMA_ETHTX_REPLACESADDR_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x0E) -#define K_DMA_ETHTX_RESERVED2 _SB_MAKE64(0x0F) +#define K_DMA_ETHTX_RESERVED2 _SB_MAKE64(0x0F) /* * Serial Receive Options (Table 7-18) */ -#define M_DMA_SERRX_CRC_ERROR _SB_MAKEMASK1(56) -#define M_DMA_SERRX_ABORT _SB_MAKEMASK1(57) -#define M_DMA_SERRX_OCTET_ERROR _SB_MAKEMASK1(58) +#define M_DMA_SERRX_CRC_ERROR _SB_MAKEMASK1(56) +#define M_DMA_SERRX_ABORT _SB_MAKEMASK1(57) +#define M_DMA_SERRX_OCTET_ERROR _SB_MAKEMASK1(58) #define M_DMA_SERRX_LONGFRAME_ERROR _SB_MAKEMASK1(59) #define M_DMA_SERRX_SHORTFRAME_ERROR _SB_MAKEMASK1(60) #define M_DMA_SERRX_OVERRUN_ERROR _SB_MAKEMASK1(61) -#define M_DMA_SERRX_GOOD _SB_MAKEMASK1(62) -#define M_DMA_SERRX_SOP _SB_MAKEMASK1(63) +#define M_DMA_SERRX_GOOD _SB_MAKEMASK1(62) +#define M_DMA_SERRX_SOP _SB_MAKEMASK1(63) /* * Serial Transmit Status Bits (Table 7-20) @@ -367,10 +367,10 @@ * Serial Transmit Options (Table 7-21) */ -#define K_DMA_SERTX_RESERVED _SB_MAKEMASK1(0) -#define K_DMA_SERTX_APPENDCRC _SB_MAKEMASK1(1) -#define K_DMA_SERTX_APPENDPAD _SB_MAKEMASK1(2) -#define K_DMA_SERTX_ABORT _SB_MAKEMASK1(3) +#define K_DMA_SERTX_RESERVED _SB_MAKEMASK1(0) +#define K_DMA_SERTX_APPENDCRC _SB_MAKEMASK1(1) +#define K_DMA_SERTX_APPENDPAD _SB_MAKEMASK1(2) +#define K_DMA_SERTX_ABORT _SB_MAKEMASK1(3) /* ********************************************************************* @@ -385,19 +385,19 @@ * Register: DM_DSCR_BASE_3 */ -#define M_DM_DSCR_BASE_MBZ _SB_MAKEMASK(4, 0) +#define M_DM_DSCR_BASE_MBZ _SB_MAKEMASK(4, 0) /* Note: Just mask the base address and then OR it in. */ -#define S_DM_DSCR_BASE_ADDR _SB_MAKE64(4) -#define M_DM_DSCR_BASE_ADDR _SB_MAKEMASK(36, S_DM_DSCR_BASE_ADDR) +#define S_DM_DSCR_BASE_ADDR _SB_MAKE64(4) +#define M_DM_DSCR_BASE_ADDR _SB_MAKEMASK(36, S_DM_DSCR_BASE_ADDR) -#define S_DM_DSCR_BASE_RINGSZ _SB_MAKE64(40) -#define M_DM_DSCR_BASE_RINGSZ _SB_MAKEMASK(16, S_DM_DSCR_BASE_RINGSZ) +#define S_DM_DSCR_BASE_RINGSZ _SB_MAKE64(40) +#define M_DM_DSCR_BASE_RINGSZ _SB_MAKEMASK(16, S_DM_DSCR_BASE_RINGSZ) #define V_DM_DSCR_BASE_RINGSZ(x) _SB_MAKEVALUE(x, S_DM_DSCR_BASE_RINGSZ) #define G_DM_DSCR_BASE_RINGSZ(x) _SB_GETVALUE(x, S_DM_DSCR_BASE_RINGSZ, M_DM_DSCR_BASE_RINGSZ) -#define S_DM_DSCR_BASE_PRIORITY _SB_MAKE64(56) -#define M_DM_DSCR_BASE_PRIORITY _SB_MAKEMASK(3, S_DM_DSCR_BASE_PRIORITY) +#define S_DM_DSCR_BASE_PRIORITY _SB_MAKE64(56) +#define M_DM_DSCR_BASE_PRIORITY _SB_MAKEMASK(3, S_DM_DSCR_BASE_PRIORITY) #define V_DM_DSCR_BASE_PRIORITY(x) _SB_MAKEVALUE(x, S_DM_DSCR_BASE_PRIORITY) #define G_DM_DSCR_BASE_PRIORITY(x) _SB_GETVALUE(x, S_DM_DSCR_BASE_PRIORITY, M_DM_DSCR_BASE_PRIORITY) @@ -407,12 +407,12 @@ #define K_DM_DSCR_BASE_PRIORITY_8 3 #define K_DM_DSCR_BASE_PRIORITY_16 4 -#define M_DM_DSCR_BASE_ACTIVE _SB_MAKEMASK1(59) +#define M_DM_DSCR_BASE_ACTIVE _SB_MAKEMASK1(59) #define M_DM_DSCR_BASE_INTERRUPT _SB_MAKEMASK1(60) -#define M_DM_DSCR_BASE_RESET _SB_MAKEMASK1(61) /* write register */ -#define M_DM_DSCR_BASE_ERROR _SB_MAKEMASK1(61) /* read register */ -#define M_DM_DSCR_BASE_ABORT _SB_MAKEMASK1(62) -#define M_DM_DSCR_BASE_ENABL _SB_MAKEMASK1(63) +#define M_DM_DSCR_BASE_RESET _SB_MAKEMASK1(61) /* write register */ +#define M_DM_DSCR_BASE_ERROR _SB_MAKEMASK1(61) /* read register */ +#define M_DM_DSCR_BASE_ABORT _SB_MAKEMASK1(62) +#define M_DM_DSCR_BASE_ENABL _SB_MAKEMASK1(63) /* * Data Mover Descriptor Count Register (Table 7-25) @@ -428,14 +428,14 @@ * Register: DM_CUR_DSCR_ADDR_3 */ -#define S_DM_CUR_DSCR_DSCR_ADDR _SB_MAKE64(0) -#define M_DM_CUR_DSCR_DSCR_ADDR _SB_MAKEMASK(40, S_DM_CUR_DSCR_DSCR_ADDR) +#define S_DM_CUR_DSCR_DSCR_ADDR _SB_MAKE64(0) +#define M_DM_CUR_DSCR_DSCR_ADDR _SB_MAKEMASK(40, S_DM_CUR_DSCR_DSCR_ADDR) #define S_DM_CUR_DSCR_DSCR_COUNT _SB_MAKE64(48) #define M_DM_CUR_DSCR_DSCR_COUNT _SB_MAKEMASK(16, S_DM_CUR_DSCR_DSCR_COUNT) #define V_DM_CUR_DSCR_DSCR_COUNT(r) _SB_MAKEVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT) #define G_DM_CUR_DSCR_DSCR_COUNT(r) _SB_GETVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT,\ - M_DM_CUR_DSCR_DSCR_COUNT) + M_DM_CUR_DSCR_DSCR_COUNT) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) @@ -450,15 +450,15 @@ #define M_DM_PARTIAL_CRC_PARTIAL _SB_MAKEMASK(32, S_DM_PARTIAL_CRC_PARTIAL) #define V_DM_PARTIAL_CRC_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_CRC_PARTIAL) #define G_DM_PARTIAL_CRC_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_CRC_PARTIAL,\ - M_DM_PARTIAL_CRC_PARTIAL) + M_DM_PARTIAL_CRC_PARTIAL) #define S_DM_PARTIAL_TCPCS_PARTIAL _SB_MAKE64(32) #define M_DM_PARTIAL_TCPCS_PARTIAL _SB_MAKEMASK(16, S_DM_PARTIAL_TCPCS_PARTIAL) #define V_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL) #define G_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL,\ - M_DM_PARTIAL_TCPCS_PARTIAL) + M_DM_PARTIAL_TCPCS_PARTIAL) -#define M_DM_PARTIAL_ODD_BYTE _SB_MAKEMASK1(48) +#define M_DM_PARTIAL_ODD_BYTE _SB_MAKEMASK1(48) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ @@ -468,17 +468,17 @@ * Register: CRC_DEF_0 * Register: CRC_DEF_1 */ -#define S_CRC_DEF_CRC_INIT _SB_MAKE64(0) -#define M_CRC_DEF_CRC_INIT _SB_MAKEMASK(32, S_CRC_DEF_CRC_INIT) -#define V_CRC_DEF_CRC_INIT(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_INIT) -#define G_CRC_DEF_CRC_INIT(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_INIT,\ - M_CRC_DEF_CRC_INIT) - -#define S_CRC_DEF_CRC_POLY _SB_MAKE64(32) -#define M_CRC_DEF_CRC_POLY _SB_MAKEMASK(32, S_CRC_DEF_CRC_POLY) -#define V_CRC_DEF_CRC_POLY(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_POLY) -#define G_CRC_DEF_CRC_POLY(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_POLY,\ - M_CRC_DEF_CRC_POLY) +#define S_CRC_DEF_CRC_INIT _SB_MAKE64(0) +#define M_CRC_DEF_CRC_INIT _SB_MAKEMASK(32, S_CRC_DEF_CRC_INIT) +#define V_CRC_DEF_CRC_INIT(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_INIT) +#define G_CRC_DEF_CRC_INIT(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_INIT,\ + M_CRC_DEF_CRC_INIT) + +#define S_CRC_DEF_CRC_POLY _SB_MAKE64(32) +#define M_CRC_DEF_CRC_POLY _SB_MAKEMASK(32, S_CRC_DEF_CRC_POLY) +#define V_CRC_DEF_CRC_POLY(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_POLY) +#define G_CRC_DEF_CRC_POLY(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_POLY,\ + M_CRC_DEF_CRC_POLY) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ @@ -488,50 +488,50 @@ * Register: CTCP_DEF_0 * Register: CTCP_DEF_1 */ -#define S_CTCP_DEF_CRC_TXOR _SB_MAKE64(0) -#define M_CTCP_DEF_CRC_TXOR _SB_MAKEMASK(32, S_CTCP_DEF_CRC_TXOR) -#define V_CTCP_DEF_CRC_TXOR(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_TXOR) -#define G_CTCP_DEF_CRC_TXOR(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_TXOR,\ - M_CTCP_DEF_CRC_TXOR) - -#define S_CTCP_DEF_TCPCS_INIT _SB_MAKE64(32) -#define M_CTCP_DEF_TCPCS_INIT _SB_MAKEMASK(16, S_CTCP_DEF_TCPCS_INIT) +#define S_CTCP_DEF_CRC_TXOR _SB_MAKE64(0) +#define M_CTCP_DEF_CRC_TXOR _SB_MAKEMASK(32, S_CTCP_DEF_CRC_TXOR) +#define V_CTCP_DEF_CRC_TXOR(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_TXOR) +#define G_CTCP_DEF_CRC_TXOR(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_TXOR,\ + M_CTCP_DEF_CRC_TXOR) + +#define S_CTCP_DEF_TCPCS_INIT _SB_MAKE64(32) +#define M_CTCP_DEF_TCPCS_INIT _SB_MAKEMASK(16, S_CTCP_DEF_TCPCS_INIT) #define V_CTCP_DEF_TCPCS_INIT(r) _SB_MAKEVALUE(r, S_CTCP_DEF_TCPCS_INIT) #define G_CTCP_DEF_TCPCS_INIT(r) _SB_GETVALUE(r, S_CTCP_DEF_TCPCS_INIT,\ - M_CTCP_DEF_TCPCS_INIT) + M_CTCP_DEF_TCPCS_INIT) -#define S_CTCP_DEF_CRC_WIDTH _SB_MAKE64(48) -#define M_CTCP_DEF_CRC_WIDTH _SB_MAKEMASK(2, S_CTCP_DEF_CRC_WIDTH) -#define V_CTCP_DEF_CRC_WIDTH(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_WIDTH) -#define G_CTCP_DEF_CRC_WIDTH(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_WIDTH,\ - M_CTCP_DEF_CRC_WIDTH) +#define S_CTCP_DEF_CRC_WIDTH _SB_MAKE64(48) +#define M_CTCP_DEF_CRC_WIDTH _SB_MAKEMASK(2, S_CTCP_DEF_CRC_WIDTH) +#define V_CTCP_DEF_CRC_WIDTH(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_WIDTH) +#define G_CTCP_DEF_CRC_WIDTH(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_WIDTH,\ + M_CTCP_DEF_CRC_WIDTH) -#define K_CTCP_DEF_CRC_WIDTH_4 0 -#define K_CTCP_DEF_CRC_WIDTH_2 1 -#define K_CTCP_DEF_CRC_WIDTH_1 2 +#define K_CTCP_DEF_CRC_WIDTH_4 0 +#define K_CTCP_DEF_CRC_WIDTH_2 1 +#define K_CTCP_DEF_CRC_WIDTH_1 2 #define M_CTCP_DEF_CRC_BIT_ORDER _SB_MAKEMASK1(50) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ /* - * Data Mover Descriptor Doubleword "A" (Table 7-26) + * Data Mover Descriptor Doubleword "A" (Table 7-26) */ -#define S_DM_DSCRA_DST_ADDR _SB_MAKE64(0) -#define M_DM_DSCRA_DST_ADDR _SB_MAKEMASK(40, S_DM_DSCRA_DST_ADDR) +#define S_DM_DSCRA_DST_ADDR _SB_MAKE64(0) +#define M_DM_DSCRA_DST_ADDR _SB_MAKEMASK(40, S_DM_DSCRA_DST_ADDR) -#define M_DM_DSCRA_UN_DEST _SB_MAKEMASK1(40) -#define M_DM_DSCRA_UN_SRC _SB_MAKEMASK1(41) -#define M_DM_DSCRA_INTERRUPT _SB_MAKEMASK1(42) +#define M_DM_DSCRA_UN_DEST _SB_MAKEMASK1(40) +#define M_DM_DSCRA_UN_SRC _SB_MAKEMASK1(41) +#define M_DM_DSCRA_INTERRUPT _SB_MAKEMASK1(42) #if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) -#define M_DM_DSCRA_THROTTLE _SB_MAKEMASK1(43) +#define M_DM_DSCRA_THROTTLE _SB_MAKEMASK1(43) #endif /* up to 1250 PASS1 */ -#define S_DM_DSCRA_DIR_DEST _SB_MAKE64(44) -#define M_DM_DSCRA_DIR_DEST _SB_MAKEMASK(2, S_DM_DSCRA_DIR_DEST) -#define V_DM_DSCRA_DIR_DEST(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_DEST) -#define G_DM_DSCRA_DIR_DEST(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_DEST, M_DM_DSCRA_DIR_DEST) +#define S_DM_DSCRA_DIR_DEST _SB_MAKE64(44) +#define M_DM_DSCRA_DIR_DEST _SB_MAKEMASK(2, S_DM_DSCRA_DIR_DEST) +#define V_DM_DSCRA_DIR_DEST(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_DEST) +#define G_DM_DSCRA_DIR_DEST(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_DEST, M_DM_DSCRA_DIR_DEST) #define K_DM_DSCRA_DIR_DEST_INCR 0 #define K_DM_DSCRA_DIR_DEST_DECR 1 @@ -541,24 +541,24 @@ #define V_DM_DSCRA_DIR_DEST_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_DECR, S_DM_DSCRA_DIR_DEST) #define V_DM_DSCRA_DIR_DEST_CONST _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_CONST, S_DM_DSCRA_DIR_DEST) -#define S_DM_DSCRA_DIR_SRC _SB_MAKE64(46) -#define M_DM_DSCRA_DIR_SRC _SB_MAKEMASK(2, S_DM_DSCRA_DIR_SRC) -#define V_DM_DSCRA_DIR_SRC(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_SRC) -#define G_DM_DSCRA_DIR_SRC(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_SRC, M_DM_DSCRA_DIR_SRC) +#define S_DM_DSCRA_DIR_SRC _SB_MAKE64(46) +#define M_DM_DSCRA_DIR_SRC _SB_MAKEMASK(2, S_DM_DSCRA_DIR_SRC) +#define V_DM_DSCRA_DIR_SRC(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_SRC) +#define G_DM_DSCRA_DIR_SRC(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_SRC, M_DM_DSCRA_DIR_SRC) -#define K_DM_DSCRA_DIR_SRC_INCR 0 -#define K_DM_DSCRA_DIR_SRC_DECR 1 +#define K_DM_DSCRA_DIR_SRC_INCR 0 +#define K_DM_DSCRA_DIR_SRC_DECR 1 #define K_DM_DSCRA_DIR_SRC_CONST 2 -#define V_DM_DSCRA_DIR_SRC_INCR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR, S_DM_DSCRA_DIR_SRC) -#define V_DM_DSCRA_DIR_SRC_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR, S_DM_DSCRA_DIR_SRC) +#define V_DM_DSCRA_DIR_SRC_INCR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR, S_DM_DSCRA_DIR_SRC) +#define V_DM_DSCRA_DIR_SRC_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR, S_DM_DSCRA_DIR_SRC) #define V_DM_DSCRA_DIR_SRC_CONST _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_CONST, S_DM_DSCRA_DIR_SRC) -#define M_DM_DSCRA_ZERO_MEM _SB_MAKEMASK1(48) -#define M_DM_DSCRA_PREFETCH _SB_MAKEMASK1(49) -#define M_DM_DSCRA_L2C_DEST _SB_MAKEMASK1(50) -#define M_DM_DSCRA_L2C_SRC _SB_MAKEMASK1(51) +#define M_DM_DSCRA_ZERO_MEM _SB_MAKEMASK1(48) +#define M_DM_DSCRA_PREFETCH _SB_MAKEMASK1(49) +#define M_DM_DSCRA_L2C_DEST _SB_MAKEMASK1(50) +#define M_DM_DSCRA_L2C_SRC _SB_MAKEMASK1(51) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_DM_DSCRA_RD_BKOFF _SB_MAKEMASK1(52) @@ -566,27 +566,27 @@ #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_DM_DSCRA_TCPCS_EN _SB_MAKEMASK1(54) -#define M_DM_DSCRA_TCPCS_RES _SB_MAKEMASK1(55) -#define M_DM_DSCRA_TCPCS_AP _SB_MAKEMASK1(56) -#define M_DM_DSCRA_CRC_EN _SB_MAKEMASK1(57) -#define M_DM_DSCRA_CRC_RES _SB_MAKEMASK1(58) -#define M_DM_DSCRA_CRC_AP _SB_MAKEMASK1(59) -#define M_DM_DSCRA_CRC_DFN _SB_MAKEMASK1(60) -#define M_DM_DSCRA_CRC_XBIT _SB_MAKEMASK1(61) +#define M_DM_DSCRA_TCPCS_EN _SB_MAKEMASK1(54) +#define M_DM_DSCRA_TCPCS_RES _SB_MAKEMASK1(55) +#define M_DM_DSCRA_TCPCS_AP _SB_MAKEMASK1(56) +#define M_DM_DSCRA_CRC_EN _SB_MAKEMASK1(57) +#define M_DM_DSCRA_CRC_RES _SB_MAKEMASK1(58) +#define M_DM_DSCRA_CRC_AP _SB_MAKEMASK1(59) +#define M_DM_DSCRA_CRC_DFN _SB_MAKEMASK1(60) +#define M_DM_DSCRA_CRC_XBIT _SB_MAKEMASK1(61) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define M_DM_DSCRA_RESERVED2 _SB_MAKEMASK(3, 61) +#define M_DM_DSCRA_RESERVED2 _SB_MAKEMASK(3, 61) /* - * Data Mover Descriptor Doubleword "B" (Table 7-25) + * Data Mover Descriptor Doubleword "B" (Table 7-25) */ -#define S_DM_DSCRB_SRC_ADDR _SB_MAKE64(0) -#define M_DM_DSCRB_SRC_ADDR _SB_MAKEMASK(40, S_DM_DSCRB_SRC_ADDR) +#define S_DM_DSCRB_SRC_ADDR _SB_MAKE64(0) +#define M_DM_DSCRB_SRC_ADDR _SB_MAKEMASK(40, S_DM_DSCRB_SRC_ADDR) -#define S_DM_DSCRB_SRC_LENGTH _SB_MAKE64(40) -#define M_DM_DSCRB_SRC_LENGTH _SB_MAKEMASK(20, S_DM_DSCRB_SRC_LENGTH) +#define S_DM_DSCRB_SRC_LENGTH _SB_MAKE64(40) +#define M_DM_DSCRB_SRC_LENGTH _SB_MAKEMASK(20, S_DM_DSCRB_SRC_LENGTH) #define V_DM_DSCRB_SRC_LENGTH(x) _SB_MAKEVALUE(x, S_DM_DSCRB_SRC_LENGTH) #define G_DM_DSCRB_SRC_LENGTH(x) _SB_GETVALUE(x, S_DM_DSCRB_SRC_LENGTH, M_DM_DSCRB_SRC_LENGTH) diff --git a/arch/mips/include/asm/sibyte/sb1250_genbus.h b/arch/mips/include/asm/sibyte/sb1250_genbus.h index a96ded1..04c009c 100644 --- a/arch/mips/include/asm/sibyte/sb1250_genbus.h +++ b/arch/mips/include/asm/sibyte/sb1250_genbus.h @@ -1,7 +1,7 @@ /* ********************************************************************* * SB1250 Board Support Package * - * Generic Bus Constants File: sb1250_genbus.h + * Generic Bus Constants File: sb1250_genbus.h * * This module contains constants and macros useful for * manipulating the SB1250's Generic Bus interface @@ -40,10 +40,10 @@ * Generic Bus Region Configuration Registers (Table 11-4) */ -#define S_IO_RDY_ACTIVE 0 +#define S_IO_RDY_ACTIVE 0 #define M_IO_RDY_ACTIVE _SB_MAKEMASK1(S_IO_RDY_ACTIVE) -#define S_IO_ENA_RDY 1 +#define S_IO_ENA_RDY 1 #define M_IO_ENA_RDY _SB_MAKEMASK1(S_IO_ENA_RDY) #define S_IO_WIDTH_SEL 2 @@ -52,7 +52,7 @@ #define K_IO_WIDTH_SEL_2 1 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ || SIBYTE_HDR_FEATURE_CHIP(1480) -#define K_IO_WIDTH_SEL_1L 2 +#define K_IO_WIDTH_SEL_1L 2 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ #define K_IO_WIDTH_SEL_4 3 #define V_IO_WIDTH_SEL(x) _SB_MAKEVALUE(x, S_IO_WIDTH_SEL) @@ -111,7 +111,7 @@ #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_IO_EARLY_CS _SB_MAKEMASK1(3) +#define M_IO_EARLY_CS _SB_MAKEMASK1(3) #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ #define S_IO_ALE_TO_CS 4 @@ -121,10 +121,10 @@ #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_IO_BURST_WIDTH _SB_MAKE64(6) -#define M_IO_BURST_WIDTH _SB_MAKEMASK(2, S_IO_BURST_WIDTH) -#define V_IO_BURST_WIDTH(x) _SB_MAKEVALUE(x, S_IO_BURST_WIDTH) -#define G_IO_BURST_WIDTH(x) _SB_GETVALUE(x, S_IO_BURST_WIDTH, M_IO_BURST_WIDTH) +#define S_IO_BURST_WIDTH _SB_MAKE64(6) +#define M_IO_BURST_WIDTH _SB_MAKEMASK(2, S_IO_BURST_WIDTH) +#define V_IO_BURST_WIDTH(x) _SB_MAKEVALUE(x, S_IO_BURST_WIDTH) +#define G_IO_BURST_WIDTH(x) _SB_GETVALUE(x, S_IO_BURST_WIDTH, M_IO_BURST_WIDTH) #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ #define S_IO_CS_WIDTH 8 @@ -149,7 +149,7 @@ #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \ || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_IO_RDY_SYNC _SB_MAKEMASK1(3) +#define M_IO_RDY_SYNC _SB_MAKEMASK1(3) #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ #define S_IO_WRITE_WIDTH 4 @@ -191,7 +191,7 @@ #define M_IO_ILL_ADDR_INT _SB_MAKEMASK1(11) #define M_IO_MULT_CS_INT _SB_MAKEMASK1(12) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_IO_COH_ERR _SB_MAKEMASK1(14) +#define M_IO_COH_ERR _SB_MAKEMASK1(14) #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ @@ -370,8 +370,8 @@ #define S_GPIO_INTR_TYPEX(n) (((n)/2)*2) #define M_GPIO_INTR_TYPEX(n) _SB_MAKEMASK(2, S_GPIO_INTR_TYPEX(n)) -#define V_GPIO_INTR_TYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPEX(n)) -#define G_GPIO_INTR_TYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_TYPEX(n), M_GPIO_INTR_TYPEX(n)) +#define V_GPIO_INTR_TYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPEX(n)) +#define G_GPIO_INTR_TYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_TYPEX(n), M_GPIO_INTR_TYPEX(n)) #define S_GPIO_INTR_TYPE0 0 #define M_GPIO_INTR_TYPE0 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE0) diff --git a/arch/mips/include/asm/sibyte/sb1250_int.h b/arch/mips/include/asm/sibyte/sb1250_int.h index dbea73d..36afcb2 100644 --- a/arch/mips/include/asm/sibyte/sb1250_int.h +++ b/arch/mips/include/asm/sibyte/sb1250_int.h @@ -45,71 +45,71 @@ * First, the interrupt numbers. */ -#define K_INT_SOURCES 64 - -#define K_INT_WATCHDOG_TIMER_0 0 -#define K_INT_WATCHDOG_TIMER_1 1 -#define K_INT_TIMER_0 2 -#define K_INT_TIMER_1 3 -#define K_INT_TIMER_2 4 -#define K_INT_TIMER_3 5 -#define K_INT_SMB_0 6 -#define K_INT_SMB_1 7 -#define K_INT_UART_0 8 -#define K_INT_UART_1 9 -#define K_INT_SER_0 10 -#define K_INT_SER_1 11 -#define K_INT_PCMCIA 12 -#define K_INT_ADDR_TRAP 13 -#define K_INT_PERF_CNT 14 -#define K_INT_TRACE_FREEZE 15 -#define K_INT_BAD_ECC 16 -#define K_INT_COR_ECC 17 -#define K_INT_IO_BUS 18 -#define K_INT_MAC_0 19 -#define K_INT_MAC_1 20 -#define K_INT_MAC_2 21 -#define K_INT_DM_CH_0 22 -#define K_INT_DM_CH_1 23 -#define K_INT_DM_CH_2 24 -#define K_INT_DM_CH_3 25 -#define K_INT_MBOX_0 26 -#define K_INT_MBOX_1 27 -#define K_INT_MBOX_2 28 -#define K_INT_MBOX_3 29 +#define K_INT_SOURCES 64 + +#define K_INT_WATCHDOG_TIMER_0 0 +#define K_INT_WATCHDOG_TIMER_1 1 +#define K_INT_TIMER_0 2 +#define K_INT_TIMER_1 3 +#define K_INT_TIMER_2 4 +#define K_INT_TIMER_3 5 +#define K_INT_SMB_0 6 +#define K_INT_SMB_1 7 +#define K_INT_UART_0 8 +#define K_INT_UART_1 9 +#define K_INT_SER_0 10 +#define K_INT_SER_1 11 +#define K_INT_PCMCIA 12 +#define K_INT_ADDR_TRAP 13 +#define K_INT_PERF_CNT 14 +#define K_INT_TRACE_FREEZE 15 +#define K_INT_BAD_ECC 16 +#define K_INT_COR_ECC 17 +#define K_INT_IO_BUS 18 +#define K_INT_MAC_0 19 +#define K_INT_MAC_1 20 +#define K_INT_MAC_2 21 +#define K_INT_DM_CH_0 22 +#define K_INT_DM_CH_1 23 +#define K_INT_DM_CH_2 24 +#define K_INT_DM_CH_3 25 +#define K_INT_MBOX_0 26 +#define K_INT_MBOX_1 27 +#define K_INT_MBOX_2 28 +#define K_INT_MBOX_3 29 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define K_INT_CYCLE_CP0_INT 30 #define K_INT_CYCLE_CP1_INT 31 #endif /* 1250 PASS2 || 112x PASS1 */ -#define K_INT_GPIO_0 32 -#define K_INT_GPIO_1 33 -#define K_INT_GPIO_2 34 -#define K_INT_GPIO_3 35 -#define K_INT_GPIO_4 36 -#define K_INT_GPIO_5 37 -#define K_INT_GPIO_6 38 -#define K_INT_GPIO_7 39 -#define K_INT_GPIO_8 40 -#define K_INT_GPIO_9 41 -#define K_INT_GPIO_10 42 -#define K_INT_GPIO_11 43 -#define K_INT_GPIO_12 44 -#define K_INT_GPIO_13 45 -#define K_INT_GPIO_14 46 -#define K_INT_GPIO_15 47 -#define K_INT_LDT_FATAL 48 -#define K_INT_LDT_NONFATAL 49 -#define K_INT_LDT_SMI 50 -#define K_INT_LDT_NMI 51 -#define K_INT_LDT_INIT 52 -#define K_INT_LDT_STARTUP 53 -#define K_INT_LDT_EXT 54 -#define K_INT_PCI_ERROR 55 -#define K_INT_PCI_INTA 56 -#define K_INT_PCI_INTB 57 -#define K_INT_PCI_INTC 58 -#define K_INT_PCI_INTD 59 -#define K_INT_SPARE_2 60 +#define K_INT_GPIO_0 32 +#define K_INT_GPIO_1 33 +#define K_INT_GPIO_2 34 +#define K_INT_GPIO_3 35 +#define K_INT_GPIO_4 36 +#define K_INT_GPIO_5 37 +#define K_INT_GPIO_6 38 +#define K_INT_GPIO_7 39 +#define K_INT_GPIO_8 40 +#define K_INT_GPIO_9 41 +#define K_INT_GPIO_10 42 +#define K_INT_GPIO_11 43 +#define K_INT_GPIO_12 44 +#define K_INT_GPIO_13 45 +#define K_INT_GPIO_14 46 +#define K_INT_GPIO_15 47 +#define K_INT_LDT_FATAL 48 +#define K_INT_LDT_NONFATAL 49 +#define K_INT_LDT_SMI 50 +#define K_INT_LDT_NMI 51 +#define K_INT_LDT_INIT 52 +#define K_INT_LDT_STARTUP 53 +#define K_INT_LDT_EXT 54 +#define K_INT_PCI_ERROR 55 +#define K_INT_PCI_INTA 56 +#define K_INT_PCI_INTB 57 +#define K_INT_PCI_INTC 58 +#define K_INT_PCI_INTD 59 +#define K_INT_SPARE_2 60 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define K_INT_MAC_0_CH1 61 #define K_INT_MAC_1_CH1 62 @@ -120,70 +120,70 @@ * Mask values for each interrupt */ -#define M_INT_WATCHDOG_TIMER_0 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0) -#define M_INT_WATCHDOG_TIMER_1 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1) -#define M_INT_TIMER_0 _SB_MAKEMASK1(K_INT_TIMER_0) -#define M_INT_TIMER_1 _SB_MAKEMASK1(K_INT_TIMER_1) -#define M_INT_TIMER_2 _SB_MAKEMASK1(K_INT_TIMER_2) -#define M_INT_TIMER_3 _SB_MAKEMASK1(K_INT_TIMER_3) -#define M_INT_SMB_0 _SB_MAKEMASK1(K_INT_SMB_0) -#define M_INT_SMB_1 _SB_MAKEMASK1(K_INT_SMB_1) -#define M_INT_UART_0 _SB_MAKEMASK1(K_INT_UART_0) -#define M_INT_UART_1 _SB_MAKEMASK1(K_INT_UART_1) -#define M_INT_SER_0 _SB_MAKEMASK1(K_INT_SER_0) -#define M_INT_SER_1 _SB_MAKEMASK1(K_INT_SER_1) -#define M_INT_PCMCIA _SB_MAKEMASK1(K_INT_PCMCIA) -#define M_INT_ADDR_TRAP _SB_MAKEMASK1(K_INT_ADDR_TRAP) -#define M_INT_PERF_CNT _SB_MAKEMASK1(K_INT_PERF_CNT) -#define M_INT_TRACE_FREEZE _SB_MAKEMASK1(K_INT_TRACE_FREEZE) -#define M_INT_BAD_ECC _SB_MAKEMASK1(K_INT_BAD_ECC) -#define M_INT_COR_ECC _SB_MAKEMASK1(K_INT_COR_ECC) -#define M_INT_IO_BUS _SB_MAKEMASK1(K_INT_IO_BUS) -#define M_INT_MAC_0 _SB_MAKEMASK1(K_INT_MAC_0) -#define M_INT_MAC_1 _SB_MAKEMASK1(K_INT_MAC_1) -#define M_INT_MAC_2 _SB_MAKEMASK1(K_INT_MAC_2) -#define M_INT_DM_CH_0 _SB_MAKEMASK1(K_INT_DM_CH_0) -#define M_INT_DM_CH_1 _SB_MAKEMASK1(K_INT_DM_CH_1) -#define M_INT_DM_CH_2 _SB_MAKEMASK1(K_INT_DM_CH_2) -#define M_INT_DM_CH_3 _SB_MAKEMASK1(K_INT_DM_CH_3) -#define M_INT_MBOX_0 _SB_MAKEMASK1(K_INT_MBOX_0) -#define M_INT_MBOX_1 _SB_MAKEMASK1(K_INT_MBOX_1) -#define M_INT_MBOX_2 _SB_MAKEMASK1(K_INT_MBOX_2) -#define M_INT_MBOX_3 _SB_MAKEMASK1(K_INT_MBOX_3) -#define M_INT_MBOX_ALL _SB_MAKEMASK(4, K_INT_MBOX_0) +#define M_INT_WATCHDOG_TIMER_0 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0) +#define M_INT_WATCHDOG_TIMER_1 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1) +#define M_INT_TIMER_0 _SB_MAKEMASK1(K_INT_TIMER_0) +#define M_INT_TIMER_1 _SB_MAKEMASK1(K_INT_TIMER_1) +#define M_INT_TIMER_2 _SB_MAKEMASK1(K_INT_TIMER_2) +#define M_INT_TIMER_3 _SB_MAKEMASK1(K_INT_TIMER_3) +#define M_INT_SMB_0 _SB_MAKEMASK1(K_INT_SMB_0) +#define M_INT_SMB_1 _SB_MAKEMASK1(K_INT_SMB_1) +#define M_INT_UART_0 _SB_MAKEMASK1(K_INT_UART_0) +#define M_INT_UART_1 _SB_MAKEMASK1(K_INT_UART_1) +#define M_INT_SER_0 _SB_MAKEMASK1(K_INT_SER_0) +#define M_INT_SER_1 _SB_MAKEMASK1(K_INT_SER_1) +#define M_INT_PCMCIA _SB_MAKEMASK1(K_INT_PCMCIA) +#define M_INT_ADDR_TRAP _SB_MAKEMASK1(K_INT_ADDR_TRAP) +#define M_INT_PERF_CNT _SB_MAKEMASK1(K_INT_PERF_CNT) +#define M_INT_TRACE_FREEZE _SB_MAKEMASK1(K_INT_TRACE_FREEZE) +#define M_INT_BAD_ECC _SB_MAKEMASK1(K_INT_BAD_ECC) +#define M_INT_COR_ECC _SB_MAKEMASK1(K_INT_COR_ECC) +#define M_INT_IO_BUS _SB_MAKEMASK1(K_INT_IO_BUS) +#define M_INT_MAC_0 _SB_MAKEMASK1(K_INT_MAC_0) +#define M_INT_MAC_1 _SB_MAKEMASK1(K_INT_MAC_1) +#define M_INT_MAC_2 _SB_MAKEMASK1(K_INT_MAC_2) +#define M_INT_DM_CH_0 _SB_MAKEMASK1(K_INT_DM_CH_0) +#define M_INT_DM_CH_1 _SB_MAKEMASK1(K_INT_DM_CH_1) +#define M_INT_DM_CH_2 _SB_MAKEMASK1(K_INT_DM_CH_2) +#define M_INT_DM_CH_3 _SB_MAKEMASK1(K_INT_DM_CH_3) +#define M_INT_MBOX_0 _SB_MAKEMASK1(K_INT_MBOX_0) +#define M_INT_MBOX_1 _SB_MAKEMASK1(K_INT_MBOX_1) +#define M_INT_MBOX_2 _SB_MAKEMASK1(K_INT_MBOX_2) +#define M_INT_MBOX_3 _SB_MAKEMASK1(K_INT_MBOX_3) +#define M_INT_MBOX_ALL _SB_MAKEMASK(4, K_INT_MBOX_0) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define M_INT_CYCLE_CP0_INT _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT) #define M_INT_CYCLE_CP1_INT _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT) #endif /* 1250 PASS2 || 112x PASS1 */ -#define M_INT_GPIO_0 _SB_MAKEMASK1(K_INT_GPIO_0) -#define M_INT_GPIO_1 _SB_MAKEMASK1(K_INT_GPIO_1) -#define M_INT_GPIO_2 _SB_MAKEMASK1(K_INT_GPIO_2) -#define M_INT_GPIO_3 _SB_MAKEMASK1(K_INT_GPIO_3) -#define M_INT_GPIO_4 _SB_MAKEMASK1(K_INT_GPIO_4) -#define M_INT_GPIO_5 _SB_MAKEMASK1(K_INT_GPIO_5) -#define M_INT_GPIO_6 _SB_MAKEMASK1(K_INT_GPIO_6) -#define M_INT_GPIO_7 _SB_MAKEMASK1(K_INT_GPIO_7) -#define M_INT_GPIO_8 _SB_MAKEMASK1(K_INT_GPIO_8) -#define M_INT_GPIO_9 _SB_MAKEMASK1(K_INT_GPIO_9) -#define M_INT_GPIO_10 _SB_MAKEMASK1(K_INT_GPIO_10) -#define M_INT_GPIO_11 _SB_MAKEMASK1(K_INT_GPIO_11) -#define M_INT_GPIO_12 _SB_MAKEMASK1(K_INT_GPIO_12) -#define M_INT_GPIO_13 _SB_MAKEMASK1(K_INT_GPIO_13) -#define M_INT_GPIO_14 _SB_MAKEMASK1(K_INT_GPIO_14) -#define M_INT_GPIO_15 _SB_MAKEMASK1(K_INT_GPIO_15) -#define M_INT_LDT_FATAL _SB_MAKEMASK1(K_INT_LDT_FATAL) -#define M_INT_LDT_NONFATAL _SB_MAKEMASK1(K_INT_LDT_NONFATAL) -#define M_INT_LDT_SMI _SB_MAKEMASK1(K_INT_LDT_SMI) -#define M_INT_LDT_NMI _SB_MAKEMASK1(K_INT_LDT_NMI) -#define M_INT_LDT_INIT _SB_MAKEMASK1(K_INT_LDT_INIT) -#define M_INT_LDT_STARTUP _SB_MAKEMASK1(K_INT_LDT_STARTUP) -#define M_INT_LDT_EXT _SB_MAKEMASK1(K_INT_LDT_EXT) -#define M_INT_PCI_ERROR _SB_MAKEMASK1(K_INT_PCI_ERROR) -#define M_INT_PCI_INTA _SB_MAKEMASK1(K_INT_PCI_INTA) -#define M_INT_PCI_INTB _SB_MAKEMASK1(K_INT_PCI_INTB) -#define M_INT_PCI_INTC _SB_MAKEMASK1(K_INT_PCI_INTC) -#define M_INT_PCI_INTD _SB_MAKEMASK1(K_INT_PCI_INTD) -#define M_INT_SPARE_2 _SB_MAKEMASK1(K_INT_SPARE_2) +#define M_INT_GPIO_0 _SB_MAKEMASK1(K_INT_GPIO_0) +#define M_INT_GPIO_1 _SB_MAKEMASK1(K_INT_GPIO_1) +#define M_INT_GPIO_2 _SB_MAKEMASK1(K_INT_GPIO_2) +#define M_INT_GPIO_3 _SB_MAKEMASK1(K_INT_GPIO_3) +#define M_INT_GPIO_4 _SB_MAKEMASK1(K_INT_GPIO_4) +#define M_INT_GPIO_5 _SB_MAKEMASK1(K_INT_GPIO_5) +#define M_INT_GPIO_6 _SB_MAKEMASK1(K_INT_GPIO_6) +#define M_INT_GPIO_7 _SB_MAKEMASK1(K_INT_GPIO_7) +#define M_INT_GPIO_8 _SB_MAKEMASK1(K_INT_GPIO_8) +#define M_INT_GPIO_9 _SB_MAKEMASK1(K_INT_GPIO_9) +#define M_INT_GPIO_10 _SB_MAKEMASK1(K_INT_GPIO_10) +#define M_INT_GPIO_11 _SB_MAKEMASK1(K_INT_GPIO_11) +#define M_INT_GPIO_12 _SB_MAKEMASK1(K_INT_GPIO_12) +#define M_INT_GPIO_13 _SB_MAKEMASK1(K_INT_GPIO_13) +#define M_INT_GPIO_14 _SB_MAKEMASK1(K_INT_GPIO_14) +#define M_INT_GPIO_15 _SB_MAKEMASK1(K_INT_GPIO_15) +#define M_INT_LDT_FATAL _SB_MAKEMASK1(K_INT_LDT_FATAL) +#define M_INT_LDT_NONFATAL _SB_MAKEMASK1(K_INT_LDT_NONFATAL) +#define M_INT_LDT_SMI _SB_MAKEMASK1(K_INT_LDT_SMI) +#define M_INT_LDT_NMI _SB_MAKEMASK1(K_INT_LDT_NMI) +#define M_INT_LDT_INIT _SB_MAKEMASK1(K_INT_LDT_INIT) +#define M_INT_LDT_STARTUP _SB_MAKEMASK1(K_INT_LDT_STARTUP) +#define M_INT_LDT_EXT _SB_MAKEMASK1(K_INT_LDT_EXT) +#define M_INT_PCI_ERROR _SB_MAKEMASK1(K_INT_PCI_ERROR) +#define M_INT_PCI_INTA _SB_MAKEMASK1(K_INT_PCI_INTA) +#define M_INT_PCI_INTB _SB_MAKEMASK1(K_INT_PCI_INTB) +#define M_INT_PCI_INTC _SB_MAKEMASK1(K_INT_PCI_INTC) +#define M_INT_PCI_INTD _SB_MAKEMASK1(K_INT_PCI_INTD) +#define M_INT_SPARE_2 _SB_MAKEMASK1(K_INT_SPARE_2) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define M_INT_MAC_0_CH1 _SB_MAKEMASK1(K_INT_MAC_0_CH1) #define M_INT_MAC_1_CH1 _SB_MAKEMASK1(K_INT_MAC_1_CH1) @@ -208,9 +208,9 @@ */ #define S_INT_LDT_INTMSG 0 -#define M_INT_LDT_INTMSG _SB_MAKEMASK(3, S_INT_LDT_INTMSG) -#define V_INT_LDT_INTMSG(x) _SB_MAKEVALUE(x, S_INT_LDT_INTMSG) -#define G_INT_LDT_INTMSG(x) _SB_GETVALUE(x, S_INT_LDT_INTMSG, M_INT_LDT_INTMSG) +#define M_INT_LDT_INTMSG _SB_MAKEMASK(3, S_INT_LDT_INTMSG) +#define V_INT_LDT_INTMSG(x) _SB_MAKEVALUE(x, S_INT_LDT_INTMSG) +#define G_INT_LDT_INTMSG(x) _SB_GETVALUE(x, S_INT_LDT_INTMSG, M_INT_LDT_INTMSG) #define K_INT_LDT_INTMSG_FIXED 0 #define K_INT_LDT_INTMSG_ARBITRATED 1 @@ -221,28 +221,28 @@ #define K_INT_LDT_INTMSG_EXTINT 6 #define K_INT_LDT_INTMSG_RESERVED 7 -#define M_INT_LDT_EDGETRIGGER 0 -#define M_INT_LDT_LEVELTRIGGER _SB_MAKEMASK1(3) +#define M_INT_LDT_EDGETRIGGER 0 +#define M_INT_LDT_LEVELTRIGGER _SB_MAKEMASK1(3) -#define M_INT_LDT_PHYSICALDEST 0 -#define M_INT_LDT_LOGICALDEST _SB_MAKEMASK1(4) +#define M_INT_LDT_PHYSICALDEST 0 +#define M_INT_LDT_LOGICALDEST _SB_MAKEMASK1(4) -#define S_INT_LDT_INTDEST 5 -#define M_INT_LDT_INTDEST _SB_MAKEMASK(10, S_INT_LDT_INTDEST) -#define V_INT_LDT_INTDEST(x) _SB_MAKEVALUE(x, S_INT_LDT_INTDEST) -#define G_INT_LDT_INTDEST(x) _SB_GETVALUE(x, S_INT_LDT_INTDEST, M_INT_LDT_INTDEST) +#define S_INT_LDT_INTDEST 5 +#define M_INT_LDT_INTDEST _SB_MAKEMASK(10, S_INT_LDT_INTDEST) +#define V_INT_LDT_INTDEST(x) _SB_MAKEVALUE(x, S_INT_LDT_INTDEST) +#define G_INT_LDT_INTDEST(x) _SB_GETVALUE(x, S_INT_LDT_INTDEST, M_INT_LDT_INTDEST) -#define S_INT_LDT_VECTOR 13 -#define M_INT_LDT_VECTOR _SB_MAKEMASK(8, S_INT_LDT_VECTOR) -#define V_INT_LDT_VECTOR(x) _SB_MAKEVALUE(x, S_INT_LDT_VECTOR) -#define G_INT_LDT_VECTOR(x) _SB_GETVALUE(x, S_INT_LDT_VECTOR, M_INT_LDT_VECTOR) +#define S_INT_LDT_VECTOR 13 +#define M_INT_LDT_VECTOR _SB_MAKEMASK(8, S_INT_LDT_VECTOR) +#define V_INT_LDT_VECTOR(x) _SB_MAKEVALUE(x, S_INT_LDT_VECTOR) +#define G_INT_LDT_VECTOR(x) _SB_GETVALUE(x, S_INT_LDT_VECTOR, M_INT_LDT_VECTOR) /* * Vector format (Table 4-6) */ #define M_LDTVECT_RAISEINT 0x00 -#define M_LDTVECT_RAISEMBOX 0x40 +#define M_LDTVECT_RAISEMBOX 0x40 #endif /* 1250/112x */ diff --git a/arch/mips/include/asm/sibyte/sb1250_l2c.h b/arch/mips/include/asm/sibyte/sb1250_l2c.h index b61a749..30092d7 100644 --- a/arch/mips/include/asm/sibyte/sb1250_l2c.h +++ b/arch/mips/include/asm/sibyte/sb1250_l2c.h @@ -39,71 +39,71 @@ * Level 2 Cache Tag register (Table 5-3) */ -#define S_L2C_TAG_MBZ 0 -#define M_L2C_TAG_MBZ _SB_MAKEMASK(5, S_L2C_TAG_MBZ) +#define S_L2C_TAG_MBZ 0 +#define M_L2C_TAG_MBZ _SB_MAKEMASK(5, S_L2C_TAG_MBZ) -#define S_L2C_TAG_INDEX 5 -#define M_L2C_TAG_INDEX _SB_MAKEMASK(12, S_L2C_TAG_INDEX) -#define V_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_L2C_TAG_INDEX) -#define G_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_L2C_TAG_INDEX, M_L2C_TAG_INDEX) +#define S_L2C_TAG_INDEX 5 +#define M_L2C_TAG_INDEX _SB_MAKEMASK(12, S_L2C_TAG_INDEX) +#define V_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_L2C_TAG_INDEX) +#define G_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_L2C_TAG_INDEX, M_L2C_TAG_INDEX) -#define S_L2C_TAG_TAG 17 -#define M_L2C_TAG_TAG _SB_MAKEMASK(23, S_L2C_TAG_TAG) -#define V_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_L2C_TAG_TAG) -#define G_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_L2C_TAG_TAG, M_L2C_TAG_TAG) +#define S_L2C_TAG_TAG 17 +#define M_L2C_TAG_TAG _SB_MAKEMASK(23, S_L2C_TAG_TAG) +#define V_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_L2C_TAG_TAG) +#define G_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_L2C_TAG_TAG, M_L2C_TAG_TAG) -#define S_L2C_TAG_ECC 40 -#define M_L2C_TAG_ECC _SB_MAKEMASK(6, S_L2C_TAG_ECC) -#define V_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_L2C_TAG_ECC) -#define G_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_L2C_TAG_ECC, M_L2C_TAG_ECC) +#define S_L2C_TAG_ECC 40 +#define M_L2C_TAG_ECC _SB_MAKEMASK(6, S_L2C_TAG_ECC) +#define V_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_L2C_TAG_ECC) +#define G_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_L2C_TAG_ECC, M_L2C_TAG_ECC) -#define S_L2C_TAG_WAY 46 -#define M_L2C_TAG_WAY _SB_MAKEMASK(2, S_L2C_TAG_WAY) -#define V_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_L2C_TAG_WAY) -#define G_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_L2C_TAG_WAY, M_L2C_TAG_WAY) +#define S_L2C_TAG_WAY 46 +#define M_L2C_TAG_WAY _SB_MAKEMASK(2, S_L2C_TAG_WAY) +#define V_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_L2C_TAG_WAY) +#define G_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_L2C_TAG_WAY, M_L2C_TAG_WAY) -#define M_L2C_TAG_DIRTY _SB_MAKEMASK1(48) -#define M_L2C_TAG_VALID _SB_MAKEMASK1(49) +#define M_L2C_TAG_DIRTY _SB_MAKEMASK1(48) +#define M_L2C_TAG_VALID _SB_MAKEMASK1(49) /* * Format of level 2 cache management address (table 5-2) */ -#define S_L2C_MGMT_INDEX 5 -#define M_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_L2C_MGMT_INDEX) -#define V_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_L2C_MGMT_INDEX) -#define G_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_L2C_MGMT_INDEX, M_L2C_MGMT_INDEX) +#define S_L2C_MGMT_INDEX 5 +#define M_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_L2C_MGMT_INDEX) +#define V_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_L2C_MGMT_INDEX) +#define G_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_L2C_MGMT_INDEX, M_L2C_MGMT_INDEX) -#define S_L2C_MGMT_QUADRANT 15 -#define M_L2C_MGMT_QUADRANT _SB_MAKEMASK(2, S_L2C_MGMT_QUADRANT) -#define V_L2C_MGMT_QUADRANT(x) _SB_MAKEVALUE(x, S_L2C_MGMT_QUADRANT) -#define G_L2C_MGMT_QUADRANT(x) _SB_GETVALUE(x, S_L2C_MGMT_QUADRANT, M_L2C_MGMT_QUADRANT) +#define S_L2C_MGMT_QUADRANT 15 +#define M_L2C_MGMT_QUADRANT _SB_MAKEMASK(2, S_L2C_MGMT_QUADRANT) +#define V_L2C_MGMT_QUADRANT(x) _SB_MAKEVALUE(x, S_L2C_MGMT_QUADRANT) +#define G_L2C_MGMT_QUADRANT(x) _SB_GETVALUE(x, S_L2C_MGMT_QUADRANT, M_L2C_MGMT_QUADRANT) #define S_L2C_MGMT_HALF 16 -#define M_L2C_MGMT_HALF _SB_MAKEMASK(1, S_L2C_MGMT_HALF) +#define M_L2C_MGMT_HALF _SB_MAKEMASK(1, S_L2C_MGMT_HALF) -#define S_L2C_MGMT_WAY 17 -#define M_L2C_MGMT_WAY _SB_MAKEMASK(2, S_L2C_MGMT_WAY) -#define V_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_L2C_MGMT_WAY) -#define G_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_L2C_MGMT_WAY, M_L2C_MGMT_WAY) +#define S_L2C_MGMT_WAY 17 +#define M_L2C_MGMT_WAY _SB_MAKEMASK(2, S_L2C_MGMT_WAY) +#define V_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_L2C_MGMT_WAY) +#define G_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_L2C_MGMT_WAY, M_L2C_MGMT_WAY) -#define S_L2C_MGMT_ECC_DIAG 21 -#define M_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_L2C_MGMT_ECC_DIAG) -#define V_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_ECC_DIAG) -#define G_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_L2C_MGMT_ECC_DIAG, M_L2C_MGMT_ECC_DIAG) +#define S_L2C_MGMT_ECC_DIAG 21 +#define M_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_L2C_MGMT_ECC_DIAG) +#define V_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_ECC_DIAG) +#define G_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_L2C_MGMT_ECC_DIAG, M_L2C_MGMT_ECC_DIAG) -#define S_L2C_MGMT_TAG 23 -#define M_L2C_MGMT_TAG _SB_MAKEMASK(4, S_L2C_MGMT_TAG) -#define V_L2C_MGMT_TAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_TAG) -#define G_L2C_MGMT_TAG(x) _SB_GETVALUE(x, S_L2C_MGMT_TAG, M_L2C_MGMT_TAG) +#define S_L2C_MGMT_TAG 23 +#define M_L2C_MGMT_TAG _SB_MAKEMASK(4, S_L2C_MGMT_TAG) +#define V_L2C_MGMT_TAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_TAG) +#define G_L2C_MGMT_TAG(x) _SB_GETVALUE(x, S_L2C_MGMT_TAG, M_L2C_MGMT_TAG) -#define M_L2C_MGMT_DIRTY _SB_MAKEMASK1(19) -#define M_L2C_MGMT_VALID _SB_MAKEMASK1(20) +#define M_L2C_MGMT_DIRTY _SB_MAKEMASK1(19) +#define M_L2C_MGMT_VALID _SB_MAKEMASK1(20) -#define A_L2C_MGMT_TAG_BASE 0x00D0000000 +#define A_L2C_MGMT_TAG_BASE 0x00D0000000 -#define L2C_ENTRIES_PER_WAY 4096 -#define L2C_NUM_WAYS 4 +#define L2C_ENTRIES_PER_WAY 4096 +#define L2C_NUM_WAYS 4 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) diff --git a/arch/mips/include/asm/sibyte/sb1250_ldt.h b/arch/mips/include/asm/sibyte/sb1250_ldt.h index bf7f320..2340c29 100644 --- a/arch/mips/include/asm/sibyte/sb1250_ldt.h +++ b/arch/mips/include/asm/sibyte/sb1250_ldt.h @@ -66,7 +66,7 @@ #define R_LDT_TYPE1_SRICMD 0x0050 #define R_LDT_TYPE1_SRITXNUM 0x0054 #define R_LDT_TYPE1_SRIRXNUM 0x0058 -#define R_LDT_TYPE1_ERRSTATUS 0x0068 +#define R_LDT_TYPE1_ERRSTATUS 0x0068 #define R_LDT_TYPE1_SRICTRL 0x006C #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define R_LDT_TYPE1_ADDSTATUS 0x0070 @@ -258,7 +258,7 @@ #define M_LDT_LINKCTRL_DWFCOUT_EN _SB_MAKEMASK1_32(31) /* - * LDT Link frequency register (Table 8-20) offset 0x48 + * LDT Link frequency register (Table 8-20) offset 0x48 */ #define S_LDT_LINKFREQ_FREQ 8 @@ -301,8 +301,8 @@ #define S_LDT_SRICMD_TXINITIALOFFSET 28 #define M_LDT_SRICMD_TXINITIALOFFSET _SB_MAKEMASK_32(3, S_LDT_SRICMD_TXINITIALOFFSET) -#define V_LDT_SRICMD_TXINITIALOFFSET(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET) -#define G_LDT_SRICMD_TXINITIALOFFSET(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET, M_LDT_SRICMD_TXINITIALOFFSET) +#define V_LDT_SRICMD_TXINITIALOFFSET(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET) +#define G_LDT_SRICMD_TXINITIALOFFSET(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET, M_LDT_SRICMD_TXINITIALOFFSET) #define M_LDT_SRICMD_LINKFREQDIRECT _SB_MAKEMASK1_32(31) @@ -318,16 +318,16 @@ #define M_LDT_ERRCTL_OVFSYNCFLOOD_EN _SB_MAKEMASK1_32(5) #define M_LDT_ERRCTL_EOCNXAFATAL_EN _SB_MAKEMASK1_32(6) #define M_LDT_ERRCTL_EOCNXANONFATAL_EN _SB_MAKEMASK1_32(7) -#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN _SB_MAKEMASK1_32(8) +#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN _SB_MAKEMASK1_32(8) #define M_LDT_ERRCTL_CRCFATAL_EN _SB_MAKEMASK1_32(9) #define M_LDT_ERRCTL_CRCNONFATAL_EN _SB_MAKEMASK1_32(10) #define M_LDT_ERRCTL_SERRFATAL_EN _SB_MAKEMASK1_32(11) #define M_LDT_ERRCTL_SRCTAGFATAL_EN _SB_MAKEMASK1_32(12) #define M_LDT_ERRCTL_SRCTAGNONFATAL_EN _SB_MAKEMASK1_32(13) -#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN _SB_MAKEMASK1_32(14) +#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN _SB_MAKEMASK1_32(14) #define M_LDT_ERRCTL_MAPNXAFATAL_EN _SB_MAKEMASK1_32(15) #define M_LDT_ERRCTL_MAPNXANONFATAL_EN _SB_MAKEMASK1_32(16) -#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN _SB_MAKEMASK1_32(17) +#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN _SB_MAKEMASK1_32(17) #define M_LDT_ERRCTL_PROTOERR _SB_MAKEMASK1_32(24) #define M_LDT_ERRCTL_OVFERR _SB_MAKEMASK1_32(25) diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h index cfc4d78..3fa94fc7 100644 --- a/arch/mips/include/asm/sibyte/sb1250_mac.h +++ b/arch/mips/include/asm/sibyte/sb1250_mac.h @@ -47,86 +47,86 @@ */ -#define M_MAC_RESERVED0 _SB_MAKEMASK1(0) -#define M_MAC_TX_HOLD_SOP_EN _SB_MAKEMASK1(1) -#define M_MAC_RETRY_EN _SB_MAKEMASK1(2) -#define M_MAC_RET_DRPREQ_EN _SB_MAKEMASK1(3) -#define M_MAC_RET_UFL_EN _SB_MAKEMASK1(4) -#define M_MAC_BURST_EN _SB_MAKEMASK1(5) - -#define S_MAC_TX_PAUSE _SB_MAKE64(6) -#define M_MAC_TX_PAUSE_CNT _SB_MAKEMASK(3, S_MAC_TX_PAUSE) -#define V_MAC_TX_PAUSE_CNT(x) _SB_MAKEVALUE(x, S_MAC_TX_PAUSE) - -#define K_MAC_TX_PAUSE_CNT_512 0 -#define K_MAC_TX_PAUSE_CNT_1K 1 -#define K_MAC_TX_PAUSE_CNT_2K 2 -#define K_MAC_TX_PAUSE_CNT_4K 3 -#define K_MAC_TX_PAUSE_CNT_8K 4 -#define K_MAC_TX_PAUSE_CNT_16K 5 -#define K_MAC_TX_PAUSE_CNT_32K 6 -#define K_MAC_TX_PAUSE_CNT_64K 7 - -#define V_MAC_TX_PAUSE_CNT_512 V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512) -#define V_MAC_TX_PAUSE_CNT_1K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K) -#define V_MAC_TX_PAUSE_CNT_2K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K) -#define V_MAC_TX_PAUSE_CNT_4K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K) -#define V_MAC_TX_PAUSE_CNT_8K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K) -#define V_MAC_TX_PAUSE_CNT_16K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K) -#define V_MAC_TX_PAUSE_CNT_32K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K) -#define V_MAC_TX_PAUSE_CNT_64K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K) - -#define M_MAC_RESERVED1 _SB_MAKEMASK(8, 9) - -#define M_MAC_AP_STAT_EN _SB_MAKEMASK1(17) +#define M_MAC_RESERVED0 _SB_MAKEMASK1(0) +#define M_MAC_TX_HOLD_SOP_EN _SB_MAKEMASK1(1) +#define M_MAC_RETRY_EN _SB_MAKEMASK1(2) +#define M_MAC_RET_DRPREQ_EN _SB_MAKEMASK1(3) +#define M_MAC_RET_UFL_EN _SB_MAKEMASK1(4) +#define M_MAC_BURST_EN _SB_MAKEMASK1(5) + +#define S_MAC_TX_PAUSE _SB_MAKE64(6) +#define M_MAC_TX_PAUSE_CNT _SB_MAKEMASK(3, S_MAC_TX_PAUSE) +#define V_MAC_TX_PAUSE_CNT(x) _SB_MAKEVALUE(x, S_MAC_TX_PAUSE) + +#define K_MAC_TX_PAUSE_CNT_512 0 +#define K_MAC_TX_PAUSE_CNT_1K 1 +#define K_MAC_TX_PAUSE_CNT_2K 2 +#define K_MAC_TX_PAUSE_CNT_4K 3 +#define K_MAC_TX_PAUSE_CNT_8K 4 +#define K_MAC_TX_PAUSE_CNT_16K 5 +#define K_MAC_TX_PAUSE_CNT_32K 6 +#define K_MAC_TX_PAUSE_CNT_64K 7 + +#define V_MAC_TX_PAUSE_CNT_512 V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512) +#define V_MAC_TX_PAUSE_CNT_1K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K) +#define V_MAC_TX_PAUSE_CNT_2K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K) +#define V_MAC_TX_PAUSE_CNT_4K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K) +#define V_MAC_TX_PAUSE_CNT_8K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K) +#define V_MAC_TX_PAUSE_CNT_16K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K) +#define V_MAC_TX_PAUSE_CNT_32K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K) +#define V_MAC_TX_PAUSE_CNT_64K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K) + +#define M_MAC_RESERVED1 _SB_MAKEMASK(8, 9) + +#define M_MAC_AP_STAT_EN _SB_MAKEMASK1(17) #if SIBYTE_HDR_FEATURE_CHIP(1480) #define M_MAC_TIMESTAMP _SB_MAKEMASK1(18) #endif -#define M_MAC_DRP_ERRPKT_EN _SB_MAKEMASK1(19) -#define M_MAC_DRP_FCSERRPKT_EN _SB_MAKEMASK1(20) -#define M_MAC_DRP_CODEERRPKT_EN _SB_MAKEMASK1(21) -#define M_MAC_DRP_DRBLERRPKT_EN _SB_MAKEMASK1(22) -#define M_MAC_DRP_RNTPKT_EN _SB_MAKEMASK1(23) -#define M_MAC_DRP_OSZPKT_EN _SB_MAKEMASK1(24) -#define M_MAC_DRP_LENERRPKT_EN _SB_MAKEMASK1(25) +#define M_MAC_DRP_ERRPKT_EN _SB_MAKEMASK1(19) +#define M_MAC_DRP_FCSERRPKT_EN _SB_MAKEMASK1(20) +#define M_MAC_DRP_CODEERRPKT_EN _SB_MAKEMASK1(21) +#define M_MAC_DRP_DRBLERRPKT_EN _SB_MAKEMASK1(22) +#define M_MAC_DRP_RNTPKT_EN _SB_MAKEMASK1(23) +#define M_MAC_DRP_OSZPKT_EN _SB_MAKEMASK1(24) +#define M_MAC_DRP_LENERRPKT_EN _SB_MAKEMASK1(25) -#define M_MAC_RESERVED3 _SB_MAKEMASK(6, 26) +#define M_MAC_RESERVED3 _SB_MAKEMASK(6, 26) -#define M_MAC_BYPASS_SEL _SB_MAKEMASK1(32) -#define M_MAC_HDX_EN _SB_MAKEMASK1(33) +#define M_MAC_BYPASS_SEL _SB_MAKEMASK1(32) +#define M_MAC_HDX_EN _SB_MAKEMASK1(33) -#define S_MAC_SPEED_SEL _SB_MAKE64(34) -#define M_MAC_SPEED_SEL _SB_MAKEMASK(2, S_MAC_SPEED_SEL) +#define S_MAC_SPEED_SEL _SB_MAKE64(34) +#define M_MAC_SPEED_SEL _SB_MAKEMASK(2, S_MAC_SPEED_SEL) #define V_MAC_SPEED_SEL(x) _SB_MAKEVALUE(x, S_MAC_SPEED_SEL) #define G_MAC_SPEED_SEL(x) _SB_GETVALUE(x, S_MAC_SPEED_SEL, M_MAC_SPEED_SEL) -#define K_MAC_SPEED_SEL_10MBPS 0 -#define K_MAC_SPEED_SEL_100MBPS 1 +#define K_MAC_SPEED_SEL_10MBPS 0 +#define K_MAC_SPEED_SEL_100MBPS 1 #define K_MAC_SPEED_SEL_1000MBPS 2 #define K_MAC_SPEED_SEL_RESERVED 3 -#define V_MAC_SPEED_SEL_10MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS) -#define V_MAC_SPEED_SEL_100MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS) +#define V_MAC_SPEED_SEL_10MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS) +#define V_MAC_SPEED_SEL_100MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS) #define V_MAC_SPEED_SEL_1000MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_1000MBPS) #define V_MAC_SPEED_SEL_RESERVED V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_RESERVED) -#define M_MAC_TX_CLK_EDGE_SEL _SB_MAKEMASK1(36) -#define M_MAC_LOOPBACK_SEL _SB_MAKEMASK1(37) -#define M_MAC_FAST_SYNC _SB_MAKEMASK1(38) -#define M_MAC_SS_EN _SB_MAKEMASK1(39) +#define M_MAC_TX_CLK_EDGE_SEL _SB_MAKEMASK1(36) +#define M_MAC_LOOPBACK_SEL _SB_MAKEMASK1(37) +#define M_MAC_FAST_SYNC _SB_MAKEMASK1(38) +#define M_MAC_SS_EN _SB_MAKEMASK1(39) #define S_MAC_BYPASS_CFG _SB_MAKE64(40) -#define M_MAC_BYPASS_CFG _SB_MAKEMASK(2, S_MAC_BYPASS_CFG) -#define V_MAC_BYPASS_CFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_CFG) -#define G_MAC_BYPASS_CFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_CFG, M_MAC_BYPASS_CFG) +#define M_MAC_BYPASS_CFG _SB_MAKEMASK(2, S_MAC_BYPASS_CFG) +#define V_MAC_BYPASS_CFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_CFG) +#define G_MAC_BYPASS_CFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_CFG, M_MAC_BYPASS_CFG) #define K_MAC_BYPASS_GMII 0 -#define K_MAC_BYPASS_ENCODED 1 -#define K_MAC_BYPASS_SOP 2 -#define K_MAC_BYPASS_EOP 3 +#define K_MAC_BYPASS_ENCODED 1 +#define K_MAC_BYPASS_SOP 2 +#define K_MAC_BYPASS_EOP 3 -#define M_MAC_BYPASS_16 _SB_MAKEMASK1(42) +#define M_MAC_BYPASS_16 _SB_MAKEMASK1(42) #define M_MAC_BYPASS_FCS_CHK _SB_MAKEMASK1(43) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) @@ -137,30 +137,30 @@ #define M_MAC_SPLIT_CH_SEL _SB_MAKEMASK1(45) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define S_MAC_BYPASS_IFG _SB_MAKE64(46) -#define M_MAC_BYPASS_IFG _SB_MAKEMASK(8, S_MAC_BYPASS_IFG) +#define S_MAC_BYPASS_IFG _SB_MAKE64(46) +#define M_MAC_BYPASS_IFG _SB_MAKEMASK(8, S_MAC_BYPASS_IFG) #define V_MAC_BYPASS_IFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_IFG) #define G_MAC_BYPASS_IFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_IFG, M_MAC_BYPASS_IFG) -#define K_MAC_FC_CMD_DISABLED 0 -#define K_MAC_FC_CMD_ENABLED 1 +#define K_MAC_FC_CMD_DISABLED 0 +#define K_MAC_FC_CMD_ENABLED 1 #define K_MAC_FC_CMD_ENAB_FALSECARR 2 -#define V_MAC_FC_CMD_DISABLED V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED) -#define V_MAC_FC_CMD_ENABLED V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED) +#define V_MAC_FC_CMD_DISABLED V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED) +#define V_MAC_FC_CMD_ENABLED V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED) #define V_MAC_FC_CMD_ENAB_FALSECARR V_MAC_FC_CMD(K_MAC_FC_CMD_ENAB_FALSECARR) -#define M_MAC_FC_SEL _SB_MAKEMASK1(54) +#define M_MAC_FC_SEL _SB_MAKEMASK1(54) -#define S_MAC_FC_CMD _SB_MAKE64(55) -#define M_MAC_FC_CMD _SB_MAKEMASK(2, S_MAC_FC_CMD) -#define V_MAC_FC_CMD(x) _SB_MAKEVALUE(x, S_MAC_FC_CMD) -#define G_MAC_FC_CMD(x) _SB_GETVALUE(x, S_MAC_FC_CMD, M_MAC_FC_CMD) +#define S_MAC_FC_CMD _SB_MAKE64(55) +#define M_MAC_FC_CMD _SB_MAKEMASK(2, S_MAC_FC_CMD) +#define V_MAC_FC_CMD(x) _SB_MAKEVALUE(x, S_MAC_FC_CMD) +#define G_MAC_FC_CMD(x) _SB_GETVALUE(x, S_MAC_FC_CMD, M_MAC_FC_CMD) -#define S_MAC_RX_CH_SEL _SB_MAKE64(57) -#define M_MAC_RX_CH_SEL _SB_MAKEMASK(7, S_MAC_RX_CH_SEL) -#define V_MAC_RX_CH_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_SEL) -#define G_MAC_RX_CH_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_SEL, M_MAC_RX_CH_SEL) +#define S_MAC_RX_CH_SEL _SB_MAKE64(57) +#define M_MAC_RX_CH_SEL _SB_MAKEMASK(7, S_MAC_RX_CH_SEL) +#define V_MAC_RX_CH_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_SEL) +#define G_MAC_RX_CH_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_SEL, M_MAC_RX_CH_SEL) /* @@ -170,18 +170,18 @@ * Register: MAC_ENABLE_2 */ -#define M_MAC_RXDMA_EN0 _SB_MAKEMASK1(0) -#define M_MAC_RXDMA_EN1 _SB_MAKEMASK1(1) -#define M_MAC_TXDMA_EN0 _SB_MAKEMASK1(4) -#define M_MAC_TXDMA_EN1 _SB_MAKEMASK1(5) +#define M_MAC_RXDMA_EN0 _SB_MAKEMASK1(0) +#define M_MAC_RXDMA_EN1 _SB_MAKEMASK1(1) +#define M_MAC_TXDMA_EN0 _SB_MAKEMASK1(4) +#define M_MAC_TXDMA_EN1 _SB_MAKEMASK1(5) -#define M_MAC_PORT_RESET _SB_MAKEMASK1(8) +#define M_MAC_PORT_RESET _SB_MAKEMASK1(8) #if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x)) -#define M_MAC_RX_ENABLE _SB_MAKEMASK1(10) -#define M_MAC_TX_ENABLE _SB_MAKEMASK1(11) -#define M_MAC_BYP_RX_ENABLE _SB_MAKEMASK1(12) -#define M_MAC_BYP_TX_ENABLE _SB_MAKEMASK1(13) +#define M_MAC_RX_ENABLE _SB_MAKEMASK1(10) +#define M_MAC_TX_ENABLE _SB_MAKEMASK1(11) +#define M_MAC_BYP_RX_ENABLE _SB_MAKEMASK1(12) +#define M_MAC_BYP_TX_ENABLE _SB_MAKEMASK1(13) #endif /* @@ -203,13 +203,13 @@ #define S_MAC_TXD_WEIGHT0 _SB_MAKE64(0) #define M_MAC_TXD_WEIGHT0 _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT0) -#define V_MAC_TXD_WEIGHT0(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT0) -#define G_MAC_TXD_WEIGHT0(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT0, M_MAC_TXD_WEIGHT0) +#define V_MAC_TXD_WEIGHT0(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT0) +#define G_MAC_TXD_WEIGHT0(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT0, M_MAC_TXD_WEIGHT0) #define S_MAC_TXD_WEIGHT1 _SB_MAKE64(4) #define M_MAC_TXD_WEIGHT1 _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT1) -#define V_MAC_TXD_WEIGHT1(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT1) -#define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1) +#define V_MAC_TXD_WEIGHT1(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT1) +#define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1) /* * MAC Fifo Threshold registers (Table 9-14) @@ -218,53 +218,53 @@ * Register: MAC_THRSH_CFG_2 */ -#define S_MAC_TX_WR_THRSH _SB_MAKE64(0) +#define S_MAC_TX_WR_THRSH _SB_MAKE64(0) #if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) -/* XXX: Can't enable, as it has the same name as a pass2+ define below. */ -/* #define M_MAC_TX_WR_THRSH _SB_MAKEMASK(6, S_MAC_TX_WR_THRSH) */ +/* XXX: Can't enable, as it has the same name as a pass2+ define below. */ +/* #define M_MAC_TX_WR_THRSH _SB_MAKEMASK(6, S_MAC_TX_WR_THRSH) */ #endif /* up to 1250 PASS1 */ #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_TX_WR_THRSH _SB_MAKEMASK(7, S_MAC_TX_WR_THRSH) +#define M_MAC_TX_WR_THRSH _SB_MAKEMASK(7, S_MAC_TX_WR_THRSH) #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ -#define V_MAC_TX_WR_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_WR_THRSH) -#define G_MAC_TX_WR_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_WR_THRSH, M_MAC_TX_WR_THRSH) +#define V_MAC_TX_WR_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_WR_THRSH) +#define G_MAC_TX_WR_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_WR_THRSH, M_MAC_TX_WR_THRSH) -#define S_MAC_TX_RD_THRSH _SB_MAKE64(8) +#define S_MAC_TX_RD_THRSH _SB_MAKE64(8) #if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1) -/* XXX: Can't enable, as it has the same name as a pass2+ define below. */ -/* #define M_MAC_TX_RD_THRSH _SB_MAKEMASK(6, S_MAC_TX_RD_THRSH) */ +/* XXX: Can't enable, as it has the same name as a pass2+ define below. */ +/* #define M_MAC_TX_RD_THRSH _SB_MAKEMASK(6, S_MAC_TX_RD_THRSH) */ #endif /* up to 1250 PASS1 */ #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_TX_RD_THRSH _SB_MAKEMASK(7, S_MAC_TX_RD_THRSH) +#define M_MAC_TX_RD_THRSH _SB_MAKEMASK(7, S_MAC_TX_RD_THRSH) #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ -#define V_MAC_TX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RD_THRSH) -#define G_MAC_TX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RD_THRSH, M_MAC_TX_RD_THRSH) +#define V_MAC_TX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RD_THRSH) +#define G_MAC_TX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RD_THRSH, M_MAC_TX_RD_THRSH) -#define S_MAC_TX_RL_THRSH _SB_MAKE64(16) -#define M_MAC_TX_RL_THRSH _SB_MAKEMASK(4, S_MAC_TX_RL_THRSH) -#define V_MAC_TX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RL_THRSH) -#define G_MAC_TX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RL_THRSH, M_MAC_TX_RL_THRSH) +#define S_MAC_TX_RL_THRSH _SB_MAKE64(16) +#define M_MAC_TX_RL_THRSH _SB_MAKEMASK(4, S_MAC_TX_RL_THRSH) +#define V_MAC_TX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RL_THRSH) +#define G_MAC_TX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RL_THRSH, M_MAC_TX_RL_THRSH) -#define S_MAC_RX_PL_THRSH _SB_MAKE64(24) -#define M_MAC_RX_PL_THRSH _SB_MAKEMASK(6, S_MAC_RX_PL_THRSH) -#define V_MAC_RX_PL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_PL_THRSH) -#define G_MAC_RX_PL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_PL_THRSH, M_MAC_RX_PL_THRSH) +#define S_MAC_RX_PL_THRSH _SB_MAKE64(24) +#define M_MAC_RX_PL_THRSH _SB_MAKEMASK(6, S_MAC_RX_PL_THRSH) +#define V_MAC_RX_PL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_PL_THRSH) +#define G_MAC_RX_PL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_PL_THRSH, M_MAC_RX_PL_THRSH) -#define S_MAC_RX_RD_THRSH _SB_MAKE64(32) -#define M_MAC_RX_RD_THRSH _SB_MAKEMASK(6, S_MAC_RX_RD_THRSH) -#define V_MAC_RX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RD_THRSH) -#define G_MAC_RX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RD_THRSH, M_MAC_RX_RD_THRSH) +#define S_MAC_RX_RD_THRSH _SB_MAKE64(32) +#define M_MAC_RX_RD_THRSH _SB_MAKEMASK(6, S_MAC_RX_RD_THRSH) +#define V_MAC_RX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RD_THRSH) +#define G_MAC_RX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RD_THRSH, M_MAC_RX_RD_THRSH) -#define S_MAC_RX_RL_THRSH _SB_MAKE64(40) -#define M_MAC_RX_RL_THRSH _SB_MAKEMASK(6, S_MAC_RX_RL_THRSH) -#define V_MAC_RX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RL_THRSH) -#define G_MAC_RX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RL_THRSH, M_MAC_RX_RL_THRSH) +#define S_MAC_RX_RL_THRSH _SB_MAKE64(40) +#define M_MAC_RX_RL_THRSH _SB_MAKEMASK(6, S_MAC_RX_RL_THRSH) +#define V_MAC_RX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RL_THRSH) +#define G_MAC_RX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RL_THRSH, M_MAC_RX_RL_THRSH) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_MAC_ENC_FC_THRSH _SB_MAKE64(56) -#define M_MAC_ENC_FC_THRSH _SB_MAKEMASK(6, S_MAC_ENC_FC_THRSH) -#define V_MAC_ENC_FC_THRSH(x) _SB_MAKEVALUE(x, S_MAC_ENC_FC_THRSH) -#define G_MAC_ENC_FC_THRSH(x) _SB_GETVALUE(x, S_MAC_ENC_FC_THRSH, M_MAC_ENC_FC_THRSH) +#define S_MAC_ENC_FC_THRSH _SB_MAKE64(56) +#define M_MAC_ENC_FC_THRSH _SB_MAKEMASK(6, S_MAC_ENC_FC_THRSH) +#define V_MAC_ENC_FC_THRSH(x) _SB_MAKEVALUE(x, S_MAC_ENC_FC_THRSH) +#define G_MAC_ENC_FC_THRSH(x) _SB_GETVALUE(x, S_MAC_ENC_FC_THRSH, M_MAC_ENC_FC_THRSH) #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ /* @@ -275,79 +275,79 @@ */ /* XXXCGD: ??? Unused in pass2? */ -#define S_MAC_IFG_RX _SB_MAKE64(0) -#define M_MAC_IFG_RX _SB_MAKEMASK(6, S_MAC_IFG_RX) -#define V_MAC_IFG_RX(x) _SB_MAKEVALUE(x, S_MAC_IFG_RX) -#define G_MAC_IFG_RX(x) _SB_GETVALUE(x, S_MAC_IFG_RX, M_MAC_IFG_RX) +#define S_MAC_IFG_RX _SB_MAKE64(0) +#define M_MAC_IFG_RX _SB_MAKEMASK(6, S_MAC_IFG_RX) +#define V_MAC_IFG_RX(x) _SB_MAKEVALUE(x, S_MAC_IFG_RX) +#define G_MAC_IFG_RX(x) _SB_GETVALUE(x, S_MAC_IFG_RX, M_MAC_IFG_RX) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_MAC_PRE_LEN _SB_MAKE64(0) -#define M_MAC_PRE_LEN _SB_MAKEMASK(6, S_MAC_PRE_LEN) -#define V_MAC_PRE_LEN(x) _SB_MAKEVALUE(x, S_MAC_PRE_LEN) -#define G_MAC_PRE_LEN(x) _SB_GETVALUE(x, S_MAC_PRE_LEN, M_MAC_PRE_LEN) +#define S_MAC_PRE_LEN _SB_MAKE64(0) +#define M_MAC_PRE_LEN _SB_MAKEMASK(6, S_MAC_PRE_LEN) +#define V_MAC_PRE_LEN(x) _SB_MAKEVALUE(x, S_MAC_PRE_LEN) +#define G_MAC_PRE_LEN(x) _SB_GETVALUE(x, S_MAC_PRE_LEN, M_MAC_PRE_LEN) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define S_MAC_IFG_TX _SB_MAKE64(6) -#define M_MAC_IFG_TX _SB_MAKEMASK(6, S_MAC_IFG_TX) -#define V_MAC_IFG_TX(x) _SB_MAKEVALUE(x, S_MAC_IFG_TX) -#define G_MAC_IFG_TX(x) _SB_GETVALUE(x, S_MAC_IFG_TX, M_MAC_IFG_TX) - -#define S_MAC_IFG_THRSH _SB_MAKE64(12) -#define M_MAC_IFG_THRSH _SB_MAKEMASK(6, S_MAC_IFG_THRSH) -#define V_MAC_IFG_THRSH(x) _SB_MAKEVALUE(x, S_MAC_IFG_THRSH) -#define G_MAC_IFG_THRSH(x) _SB_GETVALUE(x, S_MAC_IFG_THRSH, M_MAC_IFG_THRSH) - -#define S_MAC_BACKOFF_SEL _SB_MAKE64(18) -#define M_MAC_BACKOFF_SEL _SB_MAKEMASK(4, S_MAC_BACKOFF_SEL) -#define V_MAC_BACKOFF_SEL(x) _SB_MAKEVALUE(x, S_MAC_BACKOFF_SEL) -#define G_MAC_BACKOFF_SEL(x) _SB_GETVALUE(x, S_MAC_BACKOFF_SEL, M_MAC_BACKOFF_SEL) - -#define S_MAC_LFSR_SEED _SB_MAKE64(22) -#define M_MAC_LFSR_SEED _SB_MAKEMASK(8, S_MAC_LFSR_SEED) -#define V_MAC_LFSR_SEED(x) _SB_MAKEVALUE(x, S_MAC_LFSR_SEED) -#define G_MAC_LFSR_SEED(x) _SB_GETVALUE(x, S_MAC_LFSR_SEED, M_MAC_LFSR_SEED) - -#define S_MAC_SLOT_SIZE _SB_MAKE64(30) -#define M_MAC_SLOT_SIZE _SB_MAKEMASK(10, S_MAC_SLOT_SIZE) -#define V_MAC_SLOT_SIZE(x) _SB_MAKEVALUE(x, S_MAC_SLOT_SIZE) -#define G_MAC_SLOT_SIZE(x) _SB_GETVALUE(x, S_MAC_SLOT_SIZE, M_MAC_SLOT_SIZE) - -#define S_MAC_MIN_FRAMESZ _SB_MAKE64(40) -#define M_MAC_MIN_FRAMESZ _SB_MAKEMASK(8, S_MAC_MIN_FRAMESZ) -#define V_MAC_MIN_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MIN_FRAMESZ) -#define G_MAC_MIN_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MIN_FRAMESZ, M_MAC_MIN_FRAMESZ) - -#define S_MAC_MAX_FRAMESZ _SB_MAKE64(48) -#define M_MAC_MAX_FRAMESZ _SB_MAKEMASK(16, S_MAC_MAX_FRAMESZ) -#define V_MAC_MAX_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MAX_FRAMESZ) -#define G_MAC_MAX_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MAX_FRAMESZ, M_MAC_MAX_FRAMESZ) +#define S_MAC_IFG_TX _SB_MAKE64(6) +#define M_MAC_IFG_TX _SB_MAKEMASK(6, S_MAC_IFG_TX) +#define V_MAC_IFG_TX(x) _SB_MAKEVALUE(x, S_MAC_IFG_TX) +#define G_MAC_IFG_TX(x) _SB_GETVALUE(x, S_MAC_IFG_TX, M_MAC_IFG_TX) + +#define S_MAC_IFG_THRSH _SB_MAKE64(12) +#define M_MAC_IFG_THRSH _SB_MAKEMASK(6, S_MAC_IFG_THRSH) +#define V_MAC_IFG_THRSH(x) _SB_MAKEVALUE(x, S_MAC_IFG_THRSH) +#define G_MAC_IFG_THRSH(x) _SB_GETVALUE(x, S_MAC_IFG_THRSH, M_MAC_IFG_THRSH) + +#define S_MAC_BACKOFF_SEL _SB_MAKE64(18) +#define M_MAC_BACKOFF_SEL _SB_MAKEMASK(4, S_MAC_BACKOFF_SEL) +#define V_MAC_BACKOFF_SEL(x) _SB_MAKEVALUE(x, S_MAC_BACKOFF_SEL) +#define G_MAC_BACKOFF_SEL(x) _SB_GETVALUE(x, S_MAC_BACKOFF_SEL, M_MAC_BACKOFF_SEL) + +#define S_MAC_LFSR_SEED _SB_MAKE64(22) +#define M_MAC_LFSR_SEED _SB_MAKEMASK(8, S_MAC_LFSR_SEED) +#define V_MAC_LFSR_SEED(x) _SB_MAKEVALUE(x, S_MAC_LFSR_SEED) +#define G_MAC_LFSR_SEED(x) _SB_GETVALUE(x, S_MAC_LFSR_SEED, M_MAC_LFSR_SEED) + +#define S_MAC_SLOT_SIZE _SB_MAKE64(30) +#define M_MAC_SLOT_SIZE _SB_MAKEMASK(10, S_MAC_SLOT_SIZE) +#define V_MAC_SLOT_SIZE(x) _SB_MAKEVALUE(x, S_MAC_SLOT_SIZE) +#define G_MAC_SLOT_SIZE(x) _SB_GETVALUE(x, S_MAC_SLOT_SIZE, M_MAC_SLOT_SIZE) + +#define S_MAC_MIN_FRAMESZ _SB_MAKE64(40) +#define M_MAC_MIN_FRAMESZ _SB_MAKEMASK(8, S_MAC_MIN_FRAMESZ) +#define V_MAC_MIN_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MIN_FRAMESZ) +#define G_MAC_MIN_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MIN_FRAMESZ, M_MAC_MIN_FRAMESZ) + +#define S_MAC_MAX_FRAMESZ _SB_MAKE64(48) +#define M_MAC_MAX_FRAMESZ _SB_MAKEMASK(16, S_MAC_MAX_FRAMESZ) +#define V_MAC_MAX_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MAX_FRAMESZ) +#define G_MAC_MAX_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MAX_FRAMESZ, M_MAC_MAX_FRAMESZ) /* * These constants are used to configure the fields within the Frame * Configuration Register. */ -#define K_MAC_IFG_RX_10 _SB_MAKE64(0) /* See table 176, not used */ -#define K_MAC_IFG_RX_100 _SB_MAKE64(0) -#define K_MAC_IFG_RX_1000 _SB_MAKE64(0) +#define K_MAC_IFG_RX_10 _SB_MAKE64(0) /* See table 176, not used */ +#define K_MAC_IFG_RX_100 _SB_MAKE64(0) +#define K_MAC_IFG_RX_1000 _SB_MAKE64(0) -#define K_MAC_IFG_TX_10 _SB_MAKE64(20) -#define K_MAC_IFG_TX_100 _SB_MAKE64(20) -#define K_MAC_IFG_TX_1000 _SB_MAKE64(8) +#define K_MAC_IFG_TX_10 _SB_MAKE64(20) +#define K_MAC_IFG_TX_100 _SB_MAKE64(20) +#define K_MAC_IFG_TX_1000 _SB_MAKE64(8) -#define K_MAC_IFG_THRSH_10 _SB_MAKE64(4) -#define K_MAC_IFG_THRSH_100 _SB_MAKE64(4) -#define K_MAC_IFG_THRSH_1000 _SB_MAKE64(0) +#define K_MAC_IFG_THRSH_10 _SB_MAKE64(4) +#define K_MAC_IFG_THRSH_100 _SB_MAKE64(4) +#define K_MAC_IFG_THRSH_1000 _SB_MAKE64(0) -#define K_MAC_SLOT_SIZE_10 _SB_MAKE64(0) -#define K_MAC_SLOT_SIZE_100 _SB_MAKE64(0) -#define K_MAC_SLOT_SIZE_1000 _SB_MAKE64(0) +#define K_MAC_SLOT_SIZE_10 _SB_MAKE64(0) +#define K_MAC_SLOT_SIZE_100 _SB_MAKE64(0) +#define K_MAC_SLOT_SIZE_1000 _SB_MAKE64(0) -#define V_MAC_IFG_RX_10 V_MAC_IFG_RX(K_MAC_IFG_RX_10) +#define V_MAC_IFG_RX_10 V_MAC_IFG_RX(K_MAC_IFG_RX_10) #define V_MAC_IFG_RX_100 V_MAC_IFG_RX(K_MAC_IFG_RX_100) #define V_MAC_IFG_RX_1000 V_MAC_IFG_RX(K_MAC_IFG_RX_1000) -#define V_MAC_IFG_TX_10 V_MAC_IFG_TX(K_MAC_IFG_TX_10) +#define V_MAC_IFG_TX_10 V_MAC_IFG_TX(K_MAC_IFG_TX_10) #define V_MAC_IFG_TX_100 V_MAC_IFG_TX(K_MAC_IFG_TX_100) #define V_MAC_IFG_TX_1000 V_MAC_IFG_TX(K_MAC_IFG_TX_1000) @@ -359,15 +359,15 @@ #define V_MAC_SLOT_SIZE_100 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_100) #define V_MAC_SLOT_SIZE_1000 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_1000) -#define K_MAC_MIN_FRAMESZ_FIFO _SB_MAKE64(9) +#define K_MAC_MIN_FRAMESZ_FIFO _SB_MAKE64(9) #define K_MAC_MIN_FRAMESZ_DEFAULT _SB_MAKE64(64) #define K_MAC_MAX_FRAMESZ_DEFAULT _SB_MAKE64(1518) -#define K_MAC_MAX_FRAMESZ_JUMBO _SB_MAKE64(9216) +#define K_MAC_MAX_FRAMESZ_JUMBO _SB_MAKE64(9216) -#define V_MAC_MIN_FRAMESZ_FIFO V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO) +#define V_MAC_MIN_FRAMESZ_FIFO V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO) #define V_MAC_MIN_FRAMESZ_DEFAULT V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_DEFAULT) #define V_MAC_MAX_FRAMESZ_DEFAULT V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_DEFAULT) -#define V_MAC_MAX_FRAMESZ_JUMBO V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO) +#define V_MAC_MAX_FRAMESZ_JUMBO V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO) /* * MAC VLAN Tag Registers (Table 9-16) @@ -376,23 +376,23 @@ * Register: MAC_VLANTAG_2 */ -#define S_MAC_VLAN_TAG _SB_MAKE64(0) -#define M_MAC_VLAN_TAG _SB_MAKEMASK(32, S_MAC_VLAN_TAG) -#define V_MAC_VLAN_TAG(x) _SB_MAKEVALUE(x, S_MAC_VLAN_TAG) -#define G_MAC_VLAN_TAG(x) _SB_GETVALUE(x, S_MAC_VLAN_TAG, M_MAC_VLAN_TAG) +#define S_MAC_VLAN_TAG _SB_MAKE64(0) +#define M_MAC_VLAN_TAG _SB_MAKEMASK(32, S_MAC_VLAN_TAG) +#define V_MAC_VLAN_TAG(x) _SB_MAKEVALUE(x, S_MAC_VLAN_TAG) +#define G_MAC_VLAN_TAG(x) _SB_GETVALUE(x, S_MAC_VLAN_TAG, M_MAC_VLAN_TAG) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define S_MAC_TX_PKT_OFFSET _SB_MAKE64(32) -#define M_MAC_TX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_TX_PKT_OFFSET) -#define V_MAC_TX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_PKT_OFFSET) -#define G_MAC_TX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_PKT_OFFSET, M_MAC_TX_PKT_OFFSET) +#define S_MAC_TX_PKT_OFFSET _SB_MAKE64(32) +#define M_MAC_TX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_TX_PKT_OFFSET) +#define V_MAC_TX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_PKT_OFFSET) +#define G_MAC_TX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_PKT_OFFSET, M_MAC_TX_PKT_OFFSET) -#define S_MAC_TX_CRC_OFFSET _SB_MAKE64(40) -#define M_MAC_TX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_TX_CRC_OFFSET) -#define V_MAC_TX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_CRC_OFFSET) -#define G_MAC_TX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_CRC_OFFSET, M_MAC_TX_CRC_OFFSET) +#define S_MAC_TX_CRC_OFFSET _SB_MAKE64(40) +#define M_MAC_TX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_TX_CRC_OFFSET) +#define V_MAC_TX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_CRC_OFFSET) +#define G_MAC_TX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_CRC_OFFSET, M_MAC_TX_CRC_OFFSET) -#define M_MAC_CH_BASE_FC_EN _SB_MAKEMASK1(48) +#define M_MAC_CH_BASE_FC_EN _SB_MAKEMASK1(48) #endif /* 1250 PASS3 || 112x PASS1 */ /* @@ -412,29 +412,29 @@ * on each channel. */ -#define S_MAC_RX_CH0 _SB_MAKE64(0) -#define S_MAC_RX_CH1 _SB_MAKE64(8) -#define S_MAC_TX_CH0 _SB_MAKE64(16) -#define S_MAC_TX_CH1 _SB_MAKE64(24) +#define S_MAC_RX_CH0 _SB_MAKE64(0) +#define S_MAC_RX_CH1 _SB_MAKE64(8) +#define S_MAC_TX_CH0 _SB_MAKE64(16) +#define S_MAC_TX_CH1 _SB_MAKE64(24) #define S_MAC_TXCHANNELS _SB_MAKE64(16) /* this is 1st TX chan */ -#define S_MAC_CHANWIDTH _SB_MAKE64(8) /* bits between channels */ +#define S_MAC_CHANWIDTH _SB_MAKE64(8) /* bits between channels */ /* - * These are the same as RX channel 0. The idea here + * These are the same as RX channel 0. The idea here * is that you'll use one of the "S_" things above * and pass just the six bits to a DMA-channel-specific ISR */ -#define M_MAC_INT_CHANNEL _SB_MAKEMASK(8, 0) -#define M_MAC_INT_EOP_COUNT _SB_MAKEMASK1(0) -#define M_MAC_INT_EOP_TIMER _SB_MAKEMASK1(1) -#define M_MAC_INT_EOP_SEEN _SB_MAKEMASK1(2) -#define M_MAC_INT_HWM _SB_MAKEMASK1(3) -#define M_MAC_INT_LWM _SB_MAKEMASK1(4) -#define M_MAC_INT_DSCR _SB_MAKEMASK1(5) -#define M_MAC_INT_ERR _SB_MAKEMASK1(6) -#define M_MAC_INT_DZERO _SB_MAKEMASK1(7) /* only for TX channels */ -#define M_MAC_INT_DROP _SB_MAKEMASK1(7) /* only for RX channels */ +#define M_MAC_INT_CHANNEL _SB_MAKEMASK(8, 0) +#define M_MAC_INT_EOP_COUNT _SB_MAKEMASK1(0) +#define M_MAC_INT_EOP_TIMER _SB_MAKEMASK1(1) +#define M_MAC_INT_EOP_SEEN _SB_MAKEMASK1(2) +#define M_MAC_INT_HWM _SB_MAKEMASK1(3) +#define M_MAC_INT_LWM _SB_MAKEMASK1(4) +#define M_MAC_INT_DSCR _SB_MAKEMASK1(5) +#define M_MAC_INT_ERR _SB_MAKEMASK1(6) +#define M_MAC_INT_DZERO _SB_MAKEMASK1(7) /* only for TX channels */ +#define M_MAC_INT_DROP _SB_MAKEMASK1(7) /* only for RX channels */ /* * In the following definitions we use ch (0/1) and txrx (TX=1, RX=0, see @@ -442,34 +442,34 @@ */ #define S_MAC_STATUS_CH_OFFSET(ch, txrx) _SB_MAKE64(((ch) + 2 * (txrx)) * S_MAC_CHANWIDTH) -#define M_MAC_STATUS_CHANNEL(ch, txrx) _SB_MAKEVALUE(_SB_MAKEMASK(8, 0), S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_CHANNEL(ch, txrx) _SB_MAKEVALUE(_SB_MAKEMASK(8, 0), S_MAC_STATUS_CH_OFFSET(ch, txrx)) #define M_MAC_STATUS_EOP_COUNT(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_COUNT, S_MAC_STATUS_CH_OFFSET(ch, txrx)) #define M_MAC_STATUS_EOP_TIMER(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_TIMER, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_EOP_SEEN(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_HWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_HWM, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_LWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_LWM, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_DSCR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DSCR, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_ERR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_ERR, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_DZERO(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DZERO, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_DROP(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DROP, S_MAC_STATUS_CH_OFFSET(ch, txrx)) -#define M_MAC_STATUS_OTHER_ERR _SB_MAKEVALUE(_SB_MAKEMASK(7, 0), 40) - - -#define M_MAC_RX_UNDRFL _SB_MAKEMASK1(40) -#define M_MAC_RX_OVRFL _SB_MAKEMASK1(41) -#define M_MAC_TX_UNDRFL _SB_MAKEMASK1(42) -#define M_MAC_TX_OVRFL _SB_MAKEMASK1(43) -#define M_MAC_LTCOL_ERR _SB_MAKEMASK1(44) -#define M_MAC_EXCOL_ERR _SB_MAKEMASK1(45) -#define M_MAC_CNTR_OVRFL_ERR _SB_MAKEMASK1(46) +#define M_MAC_STATUS_EOP_SEEN(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_HWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_HWM, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_LWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_LWM, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_DSCR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DSCR, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_ERR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_ERR, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_DZERO(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DZERO, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_DROP(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DROP, S_MAC_STATUS_CH_OFFSET(ch, txrx)) +#define M_MAC_STATUS_OTHER_ERR _SB_MAKEVALUE(_SB_MAKEMASK(7, 0), 40) + + +#define M_MAC_RX_UNDRFL _SB_MAKEMASK1(40) +#define M_MAC_RX_OVRFL _SB_MAKEMASK1(41) +#define M_MAC_TX_UNDRFL _SB_MAKEMASK1(42) +#define M_MAC_TX_OVRFL _SB_MAKEMASK1(43) +#define M_MAC_LTCOL_ERR _SB_MAKEMASK1(44) +#define M_MAC_EXCOL_ERR _SB_MAKEMASK1(45) +#define M_MAC_CNTR_OVRFL_ERR _SB_MAKEMASK1(46) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_MAC_SPLIT_EN _SB_MAKEMASK1(47) /* interrupt mask only */ +#define M_MAC_SPLIT_EN _SB_MAKEMASK1(47) /* interrupt mask only */ #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ -#define S_MAC_COUNTER_ADDR _SB_MAKE64(47) -#define M_MAC_COUNTER_ADDR _SB_MAKEMASK(5, S_MAC_COUNTER_ADDR) -#define V_MAC_COUNTER_ADDR(x) _SB_MAKEVALUE(x, S_MAC_COUNTER_ADDR) -#define G_MAC_COUNTER_ADDR(x) _SB_GETVALUE(x, S_MAC_COUNTER_ADDR, M_MAC_COUNTER_ADDR) +#define S_MAC_COUNTER_ADDR _SB_MAKE64(47) +#define M_MAC_COUNTER_ADDR _SB_MAKEMASK(5, S_MAC_COUNTER_ADDR) +#define V_MAC_COUNTER_ADDR(x) _SB_MAKEVALUE(x, S_MAC_COUNTER_ADDR) +#define G_MAC_COUNTER_ADDR(x) _SB_GETVALUE(x, S_MAC_COUNTER_ADDR, M_MAC_COUNTER_ADDR) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_MAC_TX_PAUSE_ON _SB_MAKEMASK1(52) @@ -482,42 +482,42 @@ * Register: MAC_FIFO_PTRS_2 */ -#define S_MAC_TX_WRPTR _SB_MAKE64(0) -#define M_MAC_TX_WRPTR _SB_MAKEMASK(6, S_MAC_TX_WRPTR) -#define V_MAC_TX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_WRPTR) -#define G_MAC_TX_WRPTR(x) _SB_GETVALUE(x, S_MAC_TX_WRPTR, M_MAC_TX_WRPTR) +#define S_MAC_TX_WRPTR _SB_MAKE64(0) +#define M_MAC_TX_WRPTR _SB_MAKEMASK(6, S_MAC_TX_WRPTR) +#define V_MAC_TX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_WRPTR) +#define G_MAC_TX_WRPTR(x) _SB_GETVALUE(x, S_MAC_TX_WRPTR, M_MAC_TX_WRPTR) -#define S_MAC_TX_RDPTR _SB_MAKE64(8) -#define M_MAC_TX_RDPTR _SB_MAKEMASK(6, S_MAC_TX_RDPTR) -#define V_MAC_TX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_RDPTR) -#define G_MAC_TX_RDPTR(x) _SB_GETVALUE(x, S_MAC_TX_RDPTR, M_MAC_TX_RDPTR) +#define S_MAC_TX_RDPTR _SB_MAKE64(8) +#define M_MAC_TX_RDPTR _SB_MAKEMASK(6, S_MAC_TX_RDPTR) +#define V_MAC_TX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_RDPTR) +#define G_MAC_TX_RDPTR(x) _SB_GETVALUE(x, S_MAC_TX_RDPTR, M_MAC_TX_RDPTR) -#define S_MAC_RX_WRPTR _SB_MAKE64(16) -#define M_MAC_RX_WRPTR _SB_MAKEMASK(6, S_MAC_RX_WRPTR) -#define V_MAC_RX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_WRPTR) -#define G_MAC_RX_WRPTR(x) _SB_GETVALUE(x, S_MAC_RX_WRPTR, M_MAC_TX_WRPTR) +#define S_MAC_RX_WRPTR _SB_MAKE64(16) +#define M_MAC_RX_WRPTR _SB_MAKEMASK(6, S_MAC_RX_WRPTR) +#define V_MAC_RX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_WRPTR) +#define G_MAC_RX_WRPTR(x) _SB_GETVALUE(x, S_MAC_RX_WRPTR, M_MAC_TX_WRPTR) -#define S_MAC_RX_RDPTR _SB_MAKE64(24) -#define M_MAC_RX_RDPTR _SB_MAKEMASK(6, S_MAC_RX_RDPTR) -#define V_MAC_RX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_RDPTR) -#define G_MAC_RX_RDPTR(x) _SB_GETVALUE(x, S_MAC_RX_RDPTR, M_MAC_TX_RDPTR) +#define S_MAC_RX_RDPTR _SB_MAKE64(24) +#define M_MAC_RX_RDPTR _SB_MAKEMASK(6, S_MAC_RX_RDPTR) +#define V_MAC_RX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_RDPTR) +#define G_MAC_RX_RDPTR(x) _SB_GETVALUE(x, S_MAC_RX_RDPTR, M_MAC_TX_RDPTR) /* - * MAC Fifo End Of Packet Count Registers (Table 9-20) [Debug register] + * MAC Fifo End Of Packet Count Registers (Table 9-20) [Debug register] * Register: MAC_EOPCNT_0 * Register: MAC_EOPCNT_1 * Register: MAC_EOPCNT_2 */ -#define S_MAC_TX_EOP_COUNTER _SB_MAKE64(0) -#define M_MAC_TX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_TX_EOP_COUNTER) -#define V_MAC_TX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_TX_EOP_COUNTER) -#define G_MAC_TX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_TX_EOP_COUNTER, M_MAC_TX_EOP_COUNTER) +#define S_MAC_TX_EOP_COUNTER _SB_MAKE64(0) +#define M_MAC_TX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_TX_EOP_COUNTER) +#define V_MAC_TX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_TX_EOP_COUNTER) +#define G_MAC_TX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_TX_EOP_COUNTER, M_MAC_TX_EOP_COUNTER) -#define S_MAC_RX_EOP_COUNTER _SB_MAKE64(8) -#define M_MAC_RX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_RX_EOP_COUNTER) -#define V_MAC_RX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_RX_EOP_COUNTER) -#define G_MAC_RX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER) +#define S_MAC_RX_EOP_COUNTER _SB_MAKE64(8) +#define M_MAC_RX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_RX_EOP_COUNTER) +#define V_MAC_RX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_RX_EOP_COUNTER) +#define G_MAC_RX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER) /* * MAC Receive Address Filter Exact Match Registers (Table 9-21) @@ -562,27 +562,27 @@ * Register: MAC_TYPE_CFG_2 */ -#define S_TYPECFG_TYPESIZE _SB_MAKE64(16) +#define S_TYPECFG_TYPESIZE _SB_MAKE64(16) #define S_TYPECFG_TYPE0 _SB_MAKE64(0) -#define M_TYPECFG_TYPE0 _SB_MAKEMASK(16, S_TYPECFG_TYPE0) -#define V_TYPECFG_TYPE0(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE0) -#define G_TYPECFG_TYPE0(x) _SB_GETVALUE(x, S_TYPECFG_TYPE0, M_TYPECFG_TYPE0) +#define M_TYPECFG_TYPE0 _SB_MAKEMASK(16, S_TYPECFG_TYPE0) +#define V_TYPECFG_TYPE0(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE0) +#define G_TYPECFG_TYPE0(x) _SB_GETVALUE(x, S_TYPECFG_TYPE0, M_TYPECFG_TYPE0) #define S_TYPECFG_TYPE1 _SB_MAKE64(0) -#define M_TYPECFG_TYPE1 _SB_MAKEMASK(16, S_TYPECFG_TYPE1) -#define V_TYPECFG_TYPE1(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE1) -#define G_TYPECFG_TYPE1(x) _SB_GETVALUE(x, S_TYPECFG_TYPE1, M_TYPECFG_TYPE1) +#define M_TYPECFG_TYPE1 _SB_MAKEMASK(16, S_TYPECFG_TYPE1) +#define V_TYPECFG_TYPE1(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE1) +#define G_TYPECFG_TYPE1(x) _SB_GETVALUE(x, S_TYPECFG_TYPE1, M_TYPECFG_TYPE1) #define S_TYPECFG_TYPE2 _SB_MAKE64(0) -#define M_TYPECFG_TYPE2 _SB_MAKEMASK(16, S_TYPECFG_TYPE2) -#define V_TYPECFG_TYPE2(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE2) -#define G_TYPECFG_TYPE2(x) _SB_GETVALUE(x, S_TYPECFG_TYPE2, M_TYPECFG_TYPE2) +#define M_TYPECFG_TYPE2 _SB_MAKEMASK(16, S_TYPECFG_TYPE2) +#define V_TYPECFG_TYPE2(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE2) +#define G_TYPECFG_TYPE2(x) _SB_GETVALUE(x, S_TYPECFG_TYPE2, M_TYPECFG_TYPE2) #define S_TYPECFG_TYPE3 _SB_MAKE64(0) -#define M_TYPECFG_TYPE3 _SB_MAKEMASK(16, S_TYPECFG_TYPE3) -#define V_TYPECFG_TYPE3(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE3) -#define G_TYPECFG_TYPE3(x) _SB_GETVALUE(x, S_TYPECFG_TYPE3, M_TYPECFG_TYPE3) +#define M_TYPECFG_TYPE3 _SB_MAKEMASK(16, S_TYPECFG_TYPE3) +#define V_TYPECFG_TYPE3(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE3) +#define G_TYPECFG_TYPE3(x) _SB_GETVALUE(x, S_TYPECFG_TYPE3, M_TYPECFG_TYPE3) /* * MAC Receive Address Filter Control Registers (Table 9-24) @@ -591,38 +591,38 @@ * Register: MAC_ADFILTER_CFG_2 */ -#define M_MAC_ALLPKT_EN _SB_MAKEMASK1(0) -#define M_MAC_UCAST_EN _SB_MAKEMASK1(1) -#define M_MAC_UCAST_INV _SB_MAKEMASK1(2) -#define M_MAC_MCAST_EN _SB_MAKEMASK1(3) -#define M_MAC_MCAST_INV _SB_MAKEMASK1(4) -#define M_MAC_BCAST_EN _SB_MAKEMASK1(5) -#define M_MAC_DIRECT_INV _SB_MAKEMASK1(6) +#define M_MAC_ALLPKT_EN _SB_MAKEMASK1(0) +#define M_MAC_UCAST_EN _SB_MAKEMASK1(1) +#define M_MAC_UCAST_INV _SB_MAKEMASK1(2) +#define M_MAC_MCAST_EN _SB_MAKEMASK1(3) +#define M_MAC_MCAST_INV _SB_MAKEMASK1(4) +#define M_MAC_BCAST_EN _SB_MAKEMASK1(5) +#define M_MAC_DIRECT_INV _SB_MAKEMASK1(6) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_MAC_ALLMCAST_EN _SB_MAKEMASK1(7) #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ -#define S_MAC_IPHDR_OFFSET _SB_MAKE64(8) -#define M_MAC_IPHDR_OFFSET _SB_MAKEMASK(8, S_MAC_IPHDR_OFFSET) +#define S_MAC_IPHDR_OFFSET _SB_MAKE64(8) +#define M_MAC_IPHDR_OFFSET _SB_MAKEMASK(8, S_MAC_IPHDR_OFFSET) #define V_MAC_IPHDR_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_IPHDR_OFFSET) #define G_MAC_IPHDR_OFFSET(x) _SB_GETVALUE(x, S_MAC_IPHDR_OFFSET, M_MAC_IPHDR_OFFSET) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_MAC_RX_CRC_OFFSET _SB_MAKE64(16) -#define M_MAC_RX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_RX_CRC_OFFSET) +#define S_MAC_RX_CRC_OFFSET _SB_MAKE64(16) +#define M_MAC_RX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_RX_CRC_OFFSET) #define V_MAC_RX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_RX_CRC_OFFSET) #define G_MAC_RX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_RX_CRC_OFFSET, M_MAC_RX_CRC_OFFSET) -#define S_MAC_RX_PKT_OFFSET _SB_MAKE64(24) -#define M_MAC_RX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_RX_PKT_OFFSET) +#define S_MAC_RX_PKT_OFFSET _SB_MAKE64(24) +#define M_MAC_RX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_RX_PKT_OFFSET) #define V_MAC_RX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_RX_PKT_OFFSET) #define G_MAC_RX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_RX_PKT_OFFSET, M_MAC_RX_PKT_OFFSET) #define M_MAC_FWDPAUSE_EN _SB_MAKEMASK1(32) #define M_MAC_VLAN_DET_EN _SB_MAKEMASK1(33) -#define S_MAC_RX_CH_MSN_SEL _SB_MAKE64(34) -#define M_MAC_RX_CH_MSN_SEL _SB_MAKEMASK(8, S_MAC_RX_CH_MSN_SEL) +#define S_MAC_RX_CH_MSN_SEL _SB_MAKE64(34) +#define M_MAC_RX_CH_MSN_SEL _SB_MAKEMASK(8, S_MAC_RX_CH_MSN_SEL) #define V_MAC_RX_CH_MSN_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_MSN_SEL) #define G_MAC_RX_CH_MSN_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_MSN_SEL, M_MAC_RX_CH_MSN_SEL) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ diff --git a/arch/mips/include/asm/sibyte/sb1250_mc.h b/arch/mips/include/asm/sibyte/sb1250_mc.h index 15048dc..8368e41 100644 --- a/arch/mips/include/asm/sibyte/sb1250_mc.h +++ b/arch/mips/include/asm/sibyte/sb1250_mc.h @@ -1,7 +1,7 @@ /* ********************************************************************* * SB1250 Board Support Package * - * Memory Controller constants File: sb1250_mc.h + * Memory Controller constants File: sb1250_mc.h * * This module contains constants and macros useful for * programming the memory controller. @@ -39,96 +39,96 @@ * Memory Channel Config Register (table 6-14) */ -#define S_MC_RESERVED0 0 -#define M_MC_RESERVED0 _SB_MAKEMASK(8, S_MC_RESERVED0) +#define S_MC_RESERVED0 0 +#define M_MC_RESERVED0 _SB_MAKEMASK(8, S_MC_RESERVED0) -#define S_MC_CHANNEL_SEL 8 -#define M_MC_CHANNEL_SEL _SB_MAKEMASK(8, S_MC_CHANNEL_SEL) -#define V_MC_CHANNEL_SEL(x) _SB_MAKEVALUE(x, S_MC_CHANNEL_SEL) -#define G_MC_CHANNEL_SEL(x) _SB_GETVALUE(x, S_MC_CHANNEL_SEL, M_MC_CHANNEL_SEL) +#define S_MC_CHANNEL_SEL 8 +#define M_MC_CHANNEL_SEL _SB_MAKEMASK(8, S_MC_CHANNEL_SEL) +#define V_MC_CHANNEL_SEL(x) _SB_MAKEVALUE(x, S_MC_CHANNEL_SEL) +#define G_MC_CHANNEL_SEL(x) _SB_GETVALUE(x, S_MC_CHANNEL_SEL, M_MC_CHANNEL_SEL) -#define S_MC_BANK0_MAP 16 -#define M_MC_BANK0_MAP _SB_MAKEMASK(4, S_MC_BANK0_MAP) -#define V_MC_BANK0_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK0_MAP) -#define G_MC_BANK0_MAP(x) _SB_GETVALUE(x, S_MC_BANK0_MAP, M_MC_BANK0_MAP) +#define S_MC_BANK0_MAP 16 +#define M_MC_BANK0_MAP _SB_MAKEMASK(4, S_MC_BANK0_MAP) +#define V_MC_BANK0_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK0_MAP) +#define G_MC_BANK0_MAP(x) _SB_GETVALUE(x, S_MC_BANK0_MAP, M_MC_BANK0_MAP) -#define K_MC_BANK0_MAP_DEFAULT 0x00 -#define V_MC_BANK0_MAP_DEFAULT V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT) +#define K_MC_BANK0_MAP_DEFAULT 0x00 +#define V_MC_BANK0_MAP_DEFAULT V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT) -#define S_MC_BANK1_MAP 20 -#define M_MC_BANK1_MAP _SB_MAKEMASK(4, S_MC_BANK1_MAP) -#define V_MC_BANK1_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK1_MAP) -#define G_MC_BANK1_MAP(x) _SB_GETVALUE(x, S_MC_BANK1_MAP, M_MC_BANK1_MAP) +#define S_MC_BANK1_MAP 20 +#define M_MC_BANK1_MAP _SB_MAKEMASK(4, S_MC_BANK1_MAP) +#define V_MC_BANK1_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK1_MAP) +#define G_MC_BANK1_MAP(x) _SB_GETVALUE(x, S_MC_BANK1_MAP, M_MC_BANK1_MAP) -#define K_MC_BANK1_MAP_DEFAULT 0x08 -#define V_MC_BANK1_MAP_DEFAULT V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT) +#define K_MC_BANK1_MAP_DEFAULT 0x08 +#define V_MC_BANK1_MAP_DEFAULT V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT) -#define S_MC_BANK2_MAP 24 -#define M_MC_BANK2_MAP _SB_MAKEMASK(4, S_MC_BANK2_MAP) -#define V_MC_BANK2_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK2_MAP) -#define G_MC_BANK2_MAP(x) _SB_GETVALUE(x, S_MC_BANK2_MAP, M_MC_BANK2_MAP) +#define S_MC_BANK2_MAP 24 +#define M_MC_BANK2_MAP _SB_MAKEMASK(4, S_MC_BANK2_MAP) +#define V_MC_BANK2_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK2_MAP) +#define G_MC_BANK2_MAP(x) _SB_GETVALUE(x, S_MC_BANK2_MAP, M_MC_BANK2_MAP) -#define K_MC_BANK2_MAP_DEFAULT 0x09 -#define V_MC_BANK2_MAP_DEFAULT V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT) +#define K_MC_BANK2_MAP_DEFAULT 0x09 +#define V_MC_BANK2_MAP_DEFAULT V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT) -#define S_MC_BANK3_MAP 28 -#define M_MC_BANK3_MAP _SB_MAKEMASK(4, S_MC_BANK3_MAP) -#define V_MC_BANK3_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK3_MAP) -#define G_MC_BANK3_MAP(x) _SB_GETVALUE(x, S_MC_BANK3_MAP, M_MC_BANK3_MAP) +#define S_MC_BANK3_MAP 28 +#define M_MC_BANK3_MAP _SB_MAKEMASK(4, S_MC_BANK3_MAP) +#define V_MC_BANK3_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK3_MAP) +#define G_MC_BANK3_MAP(x) _SB_GETVALUE(x, S_MC_BANK3_MAP, M_MC_BANK3_MAP) -#define K_MC_BANK3_MAP_DEFAULT 0x0C -#define V_MC_BANK3_MAP_DEFAULT V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT) +#define K_MC_BANK3_MAP_DEFAULT 0x0C +#define V_MC_BANK3_MAP_DEFAULT V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT) -#define M_MC_RESERVED1 _SB_MAKEMASK(8, 32) +#define M_MC_RESERVED1 _SB_MAKEMASK(8, 32) #define S_MC_QUEUE_SIZE 40 -#define M_MC_QUEUE_SIZE _SB_MAKEMASK(4, S_MC_QUEUE_SIZE) -#define V_MC_QUEUE_SIZE(x) _SB_MAKEVALUE(x, S_MC_QUEUE_SIZE) -#define G_MC_QUEUE_SIZE(x) _SB_GETVALUE(x, S_MC_QUEUE_SIZE, M_MC_QUEUE_SIZE) -#define V_MC_QUEUE_SIZE_DEFAULT V_MC_QUEUE_SIZE(0x0A) - -#define S_MC_AGE_LIMIT 44 -#define M_MC_AGE_LIMIT _SB_MAKEMASK(4, S_MC_AGE_LIMIT) -#define V_MC_AGE_LIMIT(x) _SB_MAKEVALUE(x, S_MC_AGE_LIMIT) -#define G_MC_AGE_LIMIT(x) _SB_GETVALUE(x, S_MC_AGE_LIMIT, M_MC_AGE_LIMIT) -#define V_MC_AGE_LIMIT_DEFAULT V_MC_AGE_LIMIT(8) - -#define S_MC_WR_LIMIT 48 -#define M_MC_WR_LIMIT _SB_MAKEMASK(4, S_MC_WR_LIMIT) -#define V_MC_WR_LIMIT(x) _SB_MAKEVALUE(x, S_MC_WR_LIMIT) -#define G_MC_WR_LIMIT(x) _SB_GETVALUE(x, S_MC_WR_LIMIT, M_MC_WR_LIMIT) -#define V_MC_WR_LIMIT_DEFAULT V_MC_WR_LIMIT(5) +#define M_MC_QUEUE_SIZE _SB_MAKEMASK(4, S_MC_QUEUE_SIZE) +#define V_MC_QUEUE_SIZE(x) _SB_MAKEVALUE(x, S_MC_QUEUE_SIZE) +#define G_MC_QUEUE_SIZE(x) _SB_GETVALUE(x, S_MC_QUEUE_SIZE, M_MC_QUEUE_SIZE) +#define V_MC_QUEUE_SIZE_DEFAULT V_MC_QUEUE_SIZE(0x0A) + +#define S_MC_AGE_LIMIT 44 +#define M_MC_AGE_LIMIT _SB_MAKEMASK(4, S_MC_AGE_LIMIT) +#define V_MC_AGE_LIMIT(x) _SB_MAKEVALUE(x, S_MC_AGE_LIMIT) +#define G_MC_AGE_LIMIT(x) _SB_GETVALUE(x, S_MC_AGE_LIMIT, M_MC_AGE_LIMIT) +#define V_MC_AGE_LIMIT_DEFAULT V_MC_AGE_LIMIT(8) + +#define S_MC_WR_LIMIT 48 +#define M_MC_WR_LIMIT _SB_MAKEMASK(4, S_MC_WR_LIMIT) +#define V_MC_WR_LIMIT(x) _SB_MAKEVALUE(x, S_MC_WR_LIMIT) +#define G_MC_WR_LIMIT(x) _SB_GETVALUE(x, S_MC_WR_LIMIT, M_MC_WR_LIMIT) +#define V_MC_WR_LIMIT_DEFAULT V_MC_WR_LIMIT(5) #define M_MC_IOB1HIGHPRIORITY _SB_MAKEMASK1(52) -#define M_MC_RESERVED2 _SB_MAKEMASK(3, 53) +#define M_MC_RESERVED2 _SB_MAKEMASK(3, 53) -#define S_MC_CS_MODE 56 -#define M_MC_CS_MODE _SB_MAKEMASK(4, S_MC_CS_MODE) -#define V_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_MC_CS_MODE) -#define G_MC_CS_MODE(x) _SB_GETVALUE(x, S_MC_CS_MODE, M_MC_CS_MODE) +#define S_MC_CS_MODE 56 +#define M_MC_CS_MODE _SB_MAKEMASK(4, S_MC_CS_MODE) +#define V_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_MC_CS_MODE) +#define G_MC_CS_MODE(x) _SB_GETVALUE(x, S_MC_CS_MODE, M_MC_CS_MODE) -#define K_MC_CS_MODE_MSB_CS 0 -#define K_MC_CS_MODE_INTLV_CS 15 +#define K_MC_CS_MODE_MSB_CS 0 +#define K_MC_CS_MODE_INTLV_CS 15 #define K_MC_CS_MODE_MIXED_CS_10 12 #define K_MC_CS_MODE_MIXED_CS_30 6 #define K_MC_CS_MODE_MIXED_CS_32 3 -#define V_MC_CS_MODE_MSB_CS V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS) -#define V_MC_CS_MODE_INTLV_CS V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS) +#define V_MC_CS_MODE_MSB_CS V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS) +#define V_MC_CS_MODE_INTLV_CS V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS) #define V_MC_CS_MODE_MIXED_CS_10 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_10) #define V_MC_CS_MODE_MIXED_CS_30 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_30) #define V_MC_CS_MODE_MIXED_CS_32 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_32) -#define M_MC_ECC_DISABLE _SB_MAKEMASK1(60) -#define M_MC_BERR_DISABLE _SB_MAKEMASK1(61) -#define M_MC_FORCE_SEQ _SB_MAKEMASK1(62) -#define M_MC_DEBUG _SB_MAKEMASK1(63) +#define M_MC_ECC_DISABLE _SB_MAKEMASK1(60) +#define M_MC_BERR_DISABLE _SB_MAKEMASK1(61) +#define M_MC_FORCE_SEQ _SB_MAKEMASK1(62) +#define M_MC_DEBUG _SB_MAKEMASK1(63) -#define V_MC_CONFIG_DEFAULT V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \ +#define V_MC_CONFIG_DEFAULT V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \ V_MC_BANK0_MAP_DEFAULT | V_MC_BANK1_MAP_DEFAULT | \ V_MC_BANK2_MAP_DEFAULT | V_MC_BANK3_MAP_DEFAULT | V_MC_CHANNEL_SEL(0) | \ - M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT + M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT /* @@ -137,96 +137,96 @@ * Note: this field has been updated to be consistent with the errata to 0.2 */ -#define S_MC_CLK_RATIO 0 -#define M_MC_CLK_RATIO _SB_MAKEMASK(4, S_MC_CLK_RATIO) -#define V_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_MC_CLK_RATIO) -#define G_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_MC_CLK_RATIO, M_MC_CLK_RATIO) +#define S_MC_CLK_RATIO 0 +#define M_MC_CLK_RATIO _SB_MAKEMASK(4, S_MC_CLK_RATIO) +#define V_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_MC_CLK_RATIO) +#define G_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_MC_CLK_RATIO, M_MC_CLK_RATIO) -#define K_MC_CLK_RATIO_2X 4 -#define K_MC_CLK_RATIO_25X 5 -#define K_MC_CLK_RATIO_3X 6 -#define K_MC_CLK_RATIO_35X 7 -#define K_MC_CLK_RATIO_4X 8 +#define K_MC_CLK_RATIO_2X 4 +#define K_MC_CLK_RATIO_25X 5 +#define K_MC_CLK_RATIO_3X 6 +#define K_MC_CLK_RATIO_35X 7 +#define K_MC_CLK_RATIO_4X 8 #define K_MC_CLK_RATIO_45X 9 #define V_MC_CLK_RATIO_2X V_MC_CLK_RATIO(K_MC_CLK_RATIO_2X) -#define V_MC_CLK_RATIO_25X V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X) -#define V_MC_CLK_RATIO_3X V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X) -#define V_MC_CLK_RATIO_35X V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X) -#define V_MC_CLK_RATIO_4X V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X) -#define V_MC_CLK_RATIO_45X V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X) -#define V_MC_CLK_RATIO_DEFAULT V_MC_CLK_RATIO_25X - -#define S_MC_REF_RATE 8 -#define M_MC_REF_RATE _SB_MAKEMASK(8, S_MC_REF_RATE) -#define V_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_MC_REF_RATE) -#define G_MC_REF_RATE(x) _SB_GETVALUE(x, S_MC_REF_RATE, M_MC_REF_RATE) - -#define K_MC_REF_RATE_100MHz 0x62 -#define K_MC_REF_RATE_133MHz 0x81 -#define K_MC_REF_RATE_200MHz 0xC4 - -#define V_MC_REF_RATE_100MHz V_MC_REF_RATE(K_MC_REF_RATE_100MHz) -#define V_MC_REF_RATE_133MHz V_MC_REF_RATE(K_MC_REF_RATE_133MHz) -#define V_MC_REF_RATE_200MHz V_MC_REF_RATE(K_MC_REF_RATE_200MHz) -#define V_MC_REF_RATE_DEFAULT V_MC_REF_RATE_100MHz - -#define S_MC_CLOCK_DRIVE 16 -#define M_MC_CLOCK_DRIVE _SB_MAKEMASK(4, S_MC_CLOCK_DRIVE) -#define V_MC_CLOCK_DRIVE(x) _SB_MAKEVALUE(x, S_MC_CLOCK_DRIVE) -#define G_MC_CLOCK_DRIVE(x) _SB_GETVALUE(x, S_MC_CLOCK_DRIVE, M_MC_CLOCK_DRIVE) +#define V_MC_CLK_RATIO_25X V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X) +#define V_MC_CLK_RATIO_3X V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X) +#define V_MC_CLK_RATIO_35X V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X) +#define V_MC_CLK_RATIO_4X V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X) +#define V_MC_CLK_RATIO_45X V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X) +#define V_MC_CLK_RATIO_DEFAULT V_MC_CLK_RATIO_25X + +#define S_MC_REF_RATE 8 +#define M_MC_REF_RATE _SB_MAKEMASK(8, S_MC_REF_RATE) +#define V_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_MC_REF_RATE) +#define G_MC_REF_RATE(x) _SB_GETVALUE(x, S_MC_REF_RATE, M_MC_REF_RATE) + +#define K_MC_REF_RATE_100MHz 0x62 +#define K_MC_REF_RATE_133MHz 0x81 +#define K_MC_REF_RATE_200MHz 0xC4 + +#define V_MC_REF_RATE_100MHz V_MC_REF_RATE(K_MC_REF_RATE_100MHz) +#define V_MC_REF_RATE_133MHz V_MC_REF_RATE(K_MC_REF_RATE_133MHz) +#define V_MC_REF_RATE_200MHz V_MC_REF_RATE(K_MC_REF_RATE_200MHz) +#define V_MC_REF_RATE_DEFAULT V_MC_REF_RATE_100MHz + +#define S_MC_CLOCK_DRIVE 16 +#define M_MC_CLOCK_DRIVE _SB_MAKEMASK(4, S_MC_CLOCK_DRIVE) +#define V_MC_CLOCK_DRIVE(x) _SB_MAKEVALUE(x, S_MC_CLOCK_DRIVE) +#define G_MC_CLOCK_DRIVE(x) _SB_GETVALUE(x, S_MC_CLOCK_DRIVE, M_MC_CLOCK_DRIVE) #define V_MC_CLOCK_DRIVE_DEFAULT V_MC_CLOCK_DRIVE(0xF) -#define S_MC_DATA_DRIVE 20 -#define M_MC_DATA_DRIVE _SB_MAKEMASK(4, S_MC_DATA_DRIVE) -#define V_MC_DATA_DRIVE(x) _SB_MAKEVALUE(x, S_MC_DATA_DRIVE) -#define G_MC_DATA_DRIVE(x) _SB_GETVALUE(x, S_MC_DATA_DRIVE, M_MC_DATA_DRIVE) -#define V_MC_DATA_DRIVE_DEFAULT V_MC_DATA_DRIVE(0x0) +#define S_MC_DATA_DRIVE 20 +#define M_MC_DATA_DRIVE _SB_MAKEMASK(4, S_MC_DATA_DRIVE) +#define V_MC_DATA_DRIVE(x) _SB_MAKEVALUE(x, S_MC_DATA_DRIVE) +#define G_MC_DATA_DRIVE(x) _SB_GETVALUE(x, S_MC_DATA_DRIVE, M_MC_DATA_DRIVE) +#define V_MC_DATA_DRIVE_DEFAULT V_MC_DATA_DRIVE(0x0) -#define S_MC_ADDR_DRIVE 24 -#define M_MC_ADDR_DRIVE _SB_MAKEMASK(4, S_MC_ADDR_DRIVE) -#define V_MC_ADDR_DRIVE(x) _SB_MAKEVALUE(x, S_MC_ADDR_DRIVE) -#define G_MC_ADDR_DRIVE(x) _SB_GETVALUE(x, S_MC_ADDR_DRIVE, M_MC_ADDR_DRIVE) -#define V_MC_ADDR_DRIVE_DEFAULT V_MC_ADDR_DRIVE(0x0) +#define S_MC_ADDR_DRIVE 24 +#define M_MC_ADDR_DRIVE _SB_MAKEMASK(4, S_MC_ADDR_DRIVE) +#define V_MC_ADDR_DRIVE(x) _SB_MAKEVALUE(x, S_MC_ADDR_DRIVE) +#define G_MC_ADDR_DRIVE(x) _SB_GETVALUE(x, S_MC_ADDR_DRIVE, M_MC_ADDR_DRIVE) +#define V_MC_ADDR_DRIVE_DEFAULT V_MC_ADDR_DRIVE(0x0) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define M_MC_REF_DISABLE _SB_MAKEMASK1(30) +#define M_MC_REF_DISABLE _SB_MAKEMASK1(30) #endif /* 1250 PASS3 || 112x PASS1 */ -#define M_MC_DLL_BYPASS _SB_MAKEMASK1(31) - -#define S_MC_DQI_SKEW 32 -#define M_MC_DQI_SKEW _SB_MAKEMASK(8, S_MC_DQI_SKEW) -#define V_MC_DQI_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQI_SKEW) -#define G_MC_DQI_SKEW(x) _SB_GETVALUE(x, S_MC_DQI_SKEW, M_MC_DQI_SKEW) -#define V_MC_DQI_SKEW_DEFAULT V_MC_DQI_SKEW(0) - -#define S_MC_DQO_SKEW 40 -#define M_MC_DQO_SKEW _SB_MAKEMASK(8, S_MC_DQO_SKEW) -#define V_MC_DQO_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQO_SKEW) -#define G_MC_DQO_SKEW(x) _SB_GETVALUE(x, S_MC_DQO_SKEW, M_MC_DQO_SKEW) -#define V_MC_DQO_SKEW_DEFAULT V_MC_DQO_SKEW(0) - -#define S_MC_ADDR_SKEW 48 -#define M_MC_ADDR_SKEW _SB_MAKEMASK(8, S_MC_ADDR_SKEW) -#define V_MC_ADDR_SKEW(x) _SB_MAKEVALUE(x, S_MC_ADDR_SKEW) -#define G_MC_ADDR_SKEW(x) _SB_GETVALUE(x, S_MC_ADDR_SKEW, M_MC_ADDR_SKEW) -#define V_MC_ADDR_SKEW_DEFAULT V_MC_ADDR_SKEW(0x0F) - -#define S_MC_DLL_DEFAULT 56 -#define M_MC_DLL_DEFAULT _SB_MAKEMASK(8, S_MC_DLL_DEFAULT) -#define V_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_MC_DLL_DEFAULT) -#define G_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_MC_DLL_DEFAULT, M_MC_DLL_DEFAULT) +#define M_MC_DLL_BYPASS _SB_MAKEMASK1(31) + +#define S_MC_DQI_SKEW 32 +#define M_MC_DQI_SKEW _SB_MAKEMASK(8, S_MC_DQI_SKEW) +#define V_MC_DQI_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQI_SKEW) +#define G_MC_DQI_SKEW(x) _SB_GETVALUE(x, S_MC_DQI_SKEW, M_MC_DQI_SKEW) +#define V_MC_DQI_SKEW_DEFAULT V_MC_DQI_SKEW(0) + +#define S_MC_DQO_SKEW 40 +#define M_MC_DQO_SKEW _SB_MAKEMASK(8, S_MC_DQO_SKEW) +#define V_MC_DQO_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQO_SKEW) +#define G_MC_DQO_SKEW(x) _SB_GETVALUE(x, S_MC_DQO_SKEW, M_MC_DQO_SKEW) +#define V_MC_DQO_SKEW_DEFAULT V_MC_DQO_SKEW(0) + +#define S_MC_ADDR_SKEW 48 +#define M_MC_ADDR_SKEW _SB_MAKEMASK(8, S_MC_ADDR_SKEW) +#define V_MC_ADDR_SKEW(x) _SB_MAKEVALUE(x, S_MC_ADDR_SKEW) +#define G_MC_ADDR_SKEW(x) _SB_GETVALUE(x, S_MC_ADDR_SKEW, M_MC_ADDR_SKEW) +#define V_MC_ADDR_SKEW_DEFAULT V_MC_ADDR_SKEW(0x0F) + +#define S_MC_DLL_DEFAULT 56 +#define M_MC_DLL_DEFAULT _SB_MAKEMASK(8, S_MC_DLL_DEFAULT) +#define V_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_MC_DLL_DEFAULT) +#define G_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_MC_DLL_DEFAULT, M_MC_DLL_DEFAULT) #define V_MC_DLL_DEFAULT_DEFAULT V_MC_DLL_DEFAULT(0x10) -#define V_MC_CLKCONFIG_DEFAULT V_MC_DLL_DEFAULT_DEFAULT | \ - V_MC_ADDR_SKEW_DEFAULT | \ - V_MC_DQO_SKEW_DEFAULT | \ - V_MC_DQI_SKEW_DEFAULT | \ - V_MC_ADDR_DRIVE_DEFAULT | \ - V_MC_DATA_DRIVE_DEFAULT | \ - V_MC_CLOCK_DRIVE_DEFAULT | \ - V_MC_REF_RATE_DEFAULT +#define V_MC_CLKCONFIG_DEFAULT V_MC_DLL_DEFAULT_DEFAULT | \ + V_MC_ADDR_SKEW_DEFAULT | \ + V_MC_DQO_SKEW_DEFAULT | \ + V_MC_DQI_SKEW_DEFAULT | \ + V_MC_ADDR_DRIVE_DEFAULT | \ + V_MC_DATA_DRIVE_DEFAULT | \ + V_MC_CLOCK_DRIVE_DEFAULT | \ + V_MC_REF_RATE_DEFAULT @@ -234,68 +234,68 @@ * DRAM Command Register (Table 6-13) */ -#define S_MC_COMMAND 0 -#define M_MC_COMMAND _SB_MAKEMASK(4, S_MC_COMMAND) -#define V_MC_COMMAND(x) _SB_MAKEVALUE(x, S_MC_COMMAND) -#define G_MC_COMMAND(x) _SB_GETVALUE(x, S_MC_COMMAND, M_MC_COMMAND) - -#define K_MC_COMMAND_EMRS 0 -#define K_MC_COMMAND_MRS 1 -#define K_MC_COMMAND_PRE 2 -#define K_MC_COMMAND_AR 3 -#define K_MC_COMMAND_SETRFSH 4 -#define K_MC_COMMAND_CLRRFSH 5 -#define K_MC_COMMAND_SETPWRDN 6 -#define K_MC_COMMAND_CLRPWRDN 7 - -#define V_MC_COMMAND_EMRS V_MC_COMMAND(K_MC_COMMAND_EMRS) -#define V_MC_COMMAND_MRS V_MC_COMMAND(K_MC_COMMAND_MRS) -#define V_MC_COMMAND_PRE V_MC_COMMAND(K_MC_COMMAND_PRE) -#define V_MC_COMMAND_AR V_MC_COMMAND(K_MC_COMMAND_AR) -#define V_MC_COMMAND_SETRFSH V_MC_COMMAND(K_MC_COMMAND_SETRFSH) -#define V_MC_COMMAND_CLRRFSH V_MC_COMMAND(K_MC_COMMAND_CLRRFSH) -#define V_MC_COMMAND_SETPWRDN V_MC_COMMAND(K_MC_COMMAND_SETPWRDN) -#define V_MC_COMMAND_CLRPWRDN V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN) - -#define M_MC_CS0 _SB_MAKEMASK1(4) -#define M_MC_CS1 _SB_MAKEMASK1(5) -#define M_MC_CS2 _SB_MAKEMASK1(6) -#define M_MC_CS3 _SB_MAKEMASK1(7) +#define S_MC_COMMAND 0 +#define M_MC_COMMAND _SB_MAKEMASK(4, S_MC_COMMAND) +#define V_MC_COMMAND(x) _SB_MAKEVALUE(x, S_MC_COMMAND) +#define G_MC_COMMAND(x) _SB_GETVALUE(x, S_MC_COMMAND, M_MC_COMMAND) + +#define K_MC_COMMAND_EMRS 0 +#define K_MC_COMMAND_MRS 1 +#define K_MC_COMMAND_PRE 2 +#define K_MC_COMMAND_AR 3 +#define K_MC_COMMAND_SETRFSH 4 +#define K_MC_COMMAND_CLRRFSH 5 +#define K_MC_COMMAND_SETPWRDN 6 +#define K_MC_COMMAND_CLRPWRDN 7 + +#define V_MC_COMMAND_EMRS V_MC_COMMAND(K_MC_COMMAND_EMRS) +#define V_MC_COMMAND_MRS V_MC_COMMAND(K_MC_COMMAND_MRS) +#define V_MC_COMMAND_PRE V_MC_COMMAND(K_MC_COMMAND_PRE) +#define V_MC_COMMAND_AR V_MC_COMMAND(K_MC_COMMAND_AR) +#define V_MC_COMMAND_SETRFSH V_MC_COMMAND(K_MC_COMMAND_SETRFSH) +#define V_MC_COMMAND_CLRRFSH V_MC_COMMAND(K_MC_COMMAND_CLRRFSH) +#define V_MC_COMMAND_SETPWRDN V_MC_COMMAND(K_MC_COMMAND_SETPWRDN) +#define V_MC_COMMAND_CLRPWRDN V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN) + +#define M_MC_CS0 _SB_MAKEMASK1(4) +#define M_MC_CS1 _SB_MAKEMASK1(5) +#define M_MC_CS2 _SB_MAKEMASK1(6) +#define M_MC_CS3 _SB_MAKEMASK1(7) /* * DRAM Mode Register (Table 6-14) */ -#define S_MC_EMODE 0 -#define M_MC_EMODE _SB_MAKEMASK(15, S_MC_EMODE) -#define V_MC_EMODE(x) _SB_MAKEVALUE(x, S_MC_EMODE) -#define G_MC_EMODE(x) _SB_GETVALUE(x, S_MC_EMODE, M_MC_EMODE) -#define V_MC_EMODE_DEFAULT V_MC_EMODE(0) - -#define S_MC_MODE 16 -#define M_MC_MODE _SB_MAKEMASK(15, S_MC_MODE) -#define V_MC_MODE(x) _SB_MAKEVALUE(x, S_MC_MODE) -#define G_MC_MODE(x) _SB_GETVALUE(x, S_MC_MODE, M_MC_MODE) -#define V_MC_MODE_DEFAULT V_MC_MODE(0x22) - -#define S_MC_DRAM_TYPE 32 -#define M_MC_DRAM_TYPE _SB_MAKEMASK(3, S_MC_DRAM_TYPE) -#define V_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_MC_DRAM_TYPE) -#define G_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_MC_DRAM_TYPE, M_MC_DRAM_TYPE) - -#define K_MC_DRAM_TYPE_JEDEC 0 -#define K_MC_DRAM_TYPE_FCRAM 1 +#define S_MC_EMODE 0 +#define M_MC_EMODE _SB_MAKEMASK(15, S_MC_EMODE) +#define V_MC_EMODE(x) _SB_MAKEVALUE(x, S_MC_EMODE) +#define G_MC_EMODE(x) _SB_GETVALUE(x, S_MC_EMODE, M_MC_EMODE) +#define V_MC_EMODE_DEFAULT V_MC_EMODE(0) + +#define S_MC_MODE 16 +#define M_MC_MODE _SB_MAKEMASK(15, S_MC_MODE) +#define V_MC_MODE(x) _SB_MAKEVALUE(x, S_MC_MODE) +#define G_MC_MODE(x) _SB_GETVALUE(x, S_MC_MODE, M_MC_MODE) +#define V_MC_MODE_DEFAULT V_MC_MODE(0x22) + +#define S_MC_DRAM_TYPE 32 +#define M_MC_DRAM_TYPE _SB_MAKEMASK(3, S_MC_DRAM_TYPE) +#define V_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_MC_DRAM_TYPE) +#define G_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_MC_DRAM_TYPE, M_MC_DRAM_TYPE) + +#define K_MC_DRAM_TYPE_JEDEC 0 +#define K_MC_DRAM_TYPE_FCRAM 1 #define K_MC_DRAM_TYPE_SGRAM 2 -#define V_MC_DRAM_TYPE_JEDEC V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC) -#define V_MC_DRAM_TYPE_FCRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM) -#define V_MC_DRAM_TYPE_SGRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM) +#define V_MC_DRAM_TYPE_JEDEC V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC) +#define V_MC_DRAM_TYPE_FCRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM) +#define V_MC_DRAM_TYPE_SGRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM) #define M_MC_EXTERNALDECODE _SB_MAKEMASK1(35) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define M_MC_PRE_ON_A8 _SB_MAKEMASK1(36) -#define M_MC_RAM_WITH_A13 _SB_MAKEMASK1(37) +#define M_MC_PRE_ON_A8 _SB_MAKEMASK1(36) +#define M_MC_RAM_WITH_A13 _SB_MAKEMASK1(37) #endif /* 1250 PASS3 || 112x PASS1 */ @@ -308,99 +308,99 @@ #define M_MC_r2wIDLE_TWOCYCLES _SB_MAKEMASK1(61) #define M_MC_r2rIDLE_TWOCYCLES _SB_MAKEMASK1(62) -#define S_MC_tFIFO 56 -#define M_MC_tFIFO _SB_MAKEMASK(4, S_MC_tFIFO) -#define V_MC_tFIFO(x) _SB_MAKEVALUE(x, S_MC_tFIFO) -#define G_MC_tFIFO(x) _SB_GETVALUE(x, S_MC_tFIFO, M_MC_tFIFO) -#define K_MC_tFIFO_DEFAULT 1 -#define V_MC_tFIFO_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) +#define S_MC_tFIFO 56 +#define M_MC_tFIFO _SB_MAKEMASK(4, S_MC_tFIFO) +#define V_MC_tFIFO(x) _SB_MAKEVALUE(x, S_MC_tFIFO) +#define G_MC_tFIFO(x) _SB_GETVALUE(x, S_MC_tFIFO, M_MC_tFIFO) +#define K_MC_tFIFO_DEFAULT 1 +#define V_MC_tFIFO_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) -#define S_MC_tRFC 52 -#define M_MC_tRFC _SB_MAKEMASK(4, S_MC_tRFC) -#define V_MC_tRFC(x) _SB_MAKEVALUE(x, S_MC_tRFC) -#define G_MC_tRFC(x) _SB_GETVALUE(x, S_MC_tRFC, M_MC_tRFC) -#define K_MC_tRFC_DEFAULT 12 -#define V_MC_tRFC_DEFAULT V_MC_tRFC(K_MC_tRFC_DEFAULT) +#define S_MC_tRFC 52 +#define M_MC_tRFC _SB_MAKEMASK(4, S_MC_tRFC) +#define V_MC_tRFC(x) _SB_MAKEVALUE(x, S_MC_tRFC) +#define G_MC_tRFC(x) _SB_GETVALUE(x, S_MC_tRFC, M_MC_tRFC) +#define K_MC_tRFC_DEFAULT 12 +#define V_MC_tRFC_DEFAULT V_MC_tRFC(K_MC_tRFC_DEFAULT) #if SIBYTE_HDR_FEATURE(1250, PASS3) -#define M_MC_tRFC_PLUS16 _SB_MAKEMASK1(51) /* 1250C3 and later. */ +#define M_MC_tRFC_PLUS16 _SB_MAKEMASK1(51) /* 1250C3 and later. */ #endif -#define S_MC_tCwCr 40 -#define M_MC_tCwCr _SB_MAKEMASK(4, S_MC_tCwCr) -#define V_MC_tCwCr(x) _SB_MAKEVALUE(x, S_MC_tCwCr) -#define G_MC_tCwCr(x) _SB_GETVALUE(x, S_MC_tCwCr, M_MC_tCwCr) -#define K_MC_tCwCr_DEFAULT 4 -#define V_MC_tCwCr_DEFAULT V_MC_tCwCr(K_MC_tCwCr_DEFAULT) - -#define S_MC_tRCr 28 -#define M_MC_tRCr _SB_MAKEMASK(4, S_MC_tRCr) -#define V_MC_tRCr(x) _SB_MAKEVALUE(x, S_MC_tRCr) -#define G_MC_tRCr(x) _SB_GETVALUE(x, S_MC_tRCr, M_MC_tRCr) -#define K_MC_tRCr_DEFAULT 9 -#define V_MC_tRCr_DEFAULT V_MC_tRCr(K_MC_tRCr_DEFAULT) - -#define S_MC_tRCw 24 -#define M_MC_tRCw _SB_MAKEMASK(4, S_MC_tRCw) -#define V_MC_tRCw(x) _SB_MAKEVALUE(x, S_MC_tRCw) -#define G_MC_tRCw(x) _SB_GETVALUE(x, S_MC_tRCw, M_MC_tRCw) -#define K_MC_tRCw_DEFAULT 10 -#define V_MC_tRCw_DEFAULT V_MC_tRCw(K_MC_tRCw_DEFAULT) - -#define S_MC_tRRD 20 -#define M_MC_tRRD _SB_MAKEMASK(4, S_MC_tRRD) -#define V_MC_tRRD(x) _SB_MAKEVALUE(x, S_MC_tRRD) -#define G_MC_tRRD(x) _SB_GETVALUE(x, S_MC_tRRD, M_MC_tRRD) -#define K_MC_tRRD_DEFAULT 2 -#define V_MC_tRRD_DEFAULT V_MC_tRRD(K_MC_tRRD_DEFAULT) - -#define S_MC_tRP 16 -#define M_MC_tRP _SB_MAKEMASK(4, S_MC_tRP) -#define V_MC_tRP(x) _SB_MAKEVALUE(x, S_MC_tRP) -#define G_MC_tRP(x) _SB_GETVALUE(x, S_MC_tRP, M_MC_tRP) -#define K_MC_tRP_DEFAULT 4 -#define V_MC_tRP_DEFAULT V_MC_tRP(K_MC_tRP_DEFAULT) - -#define S_MC_tCwD 8 -#define M_MC_tCwD _SB_MAKEMASK(4, S_MC_tCwD) -#define V_MC_tCwD(x) _SB_MAKEVALUE(x, S_MC_tCwD) -#define G_MC_tCwD(x) _SB_GETVALUE(x, S_MC_tCwD, M_MC_tCwD) -#define K_MC_tCwD_DEFAULT 1 -#define V_MC_tCwD_DEFAULT V_MC_tCwD(K_MC_tCwD_DEFAULT) - -#define M_tCrDh _SB_MAKEMASK1(7) +#define S_MC_tCwCr 40 +#define M_MC_tCwCr _SB_MAKEMASK(4, S_MC_tCwCr) +#define V_MC_tCwCr(x) _SB_MAKEVALUE(x, S_MC_tCwCr) +#define G_MC_tCwCr(x) _SB_GETVALUE(x, S_MC_tCwCr, M_MC_tCwCr) +#define K_MC_tCwCr_DEFAULT 4 +#define V_MC_tCwCr_DEFAULT V_MC_tCwCr(K_MC_tCwCr_DEFAULT) + +#define S_MC_tRCr 28 +#define M_MC_tRCr _SB_MAKEMASK(4, S_MC_tRCr) +#define V_MC_tRCr(x) _SB_MAKEVALUE(x, S_MC_tRCr) +#define G_MC_tRCr(x) _SB_GETVALUE(x, S_MC_tRCr, M_MC_tRCr) +#define K_MC_tRCr_DEFAULT 9 +#define V_MC_tRCr_DEFAULT V_MC_tRCr(K_MC_tRCr_DEFAULT) + +#define S_MC_tRCw 24 +#define M_MC_tRCw _SB_MAKEMASK(4, S_MC_tRCw) +#define V_MC_tRCw(x) _SB_MAKEVALUE(x, S_MC_tRCw) +#define G_MC_tRCw(x) _SB_GETVALUE(x, S_MC_tRCw, M_MC_tRCw) +#define K_MC_tRCw_DEFAULT 10 +#define V_MC_tRCw_DEFAULT V_MC_tRCw(K_MC_tRCw_DEFAULT) + +#define S_MC_tRRD 20 +#define M_MC_tRRD _SB_MAKEMASK(4, S_MC_tRRD) +#define V_MC_tRRD(x) _SB_MAKEVALUE(x, S_MC_tRRD) +#define G_MC_tRRD(x) _SB_GETVALUE(x, S_MC_tRRD, M_MC_tRRD) +#define K_MC_tRRD_DEFAULT 2 +#define V_MC_tRRD_DEFAULT V_MC_tRRD(K_MC_tRRD_DEFAULT) + +#define S_MC_tRP 16 +#define M_MC_tRP _SB_MAKEMASK(4, S_MC_tRP) +#define V_MC_tRP(x) _SB_MAKEVALUE(x, S_MC_tRP) +#define G_MC_tRP(x) _SB_GETVALUE(x, S_MC_tRP, M_MC_tRP) +#define K_MC_tRP_DEFAULT 4 +#define V_MC_tRP_DEFAULT V_MC_tRP(K_MC_tRP_DEFAULT) + +#define S_MC_tCwD 8 +#define M_MC_tCwD _SB_MAKEMASK(4, S_MC_tCwD) +#define V_MC_tCwD(x) _SB_MAKEVALUE(x, S_MC_tCwD) +#define G_MC_tCwD(x) _SB_GETVALUE(x, S_MC_tCwD, M_MC_tCwD) +#define K_MC_tCwD_DEFAULT 1 +#define V_MC_tCwD_DEFAULT V_MC_tCwD(K_MC_tCwD_DEFAULT) + +#define M_tCrDh _SB_MAKEMASK1(7) #define M_MC_tCrDh M_tCrDh -#define S_MC_tCrD 4 -#define M_MC_tCrD _SB_MAKEMASK(3, S_MC_tCrD) -#define V_MC_tCrD(x) _SB_MAKEVALUE(x, S_MC_tCrD) -#define G_MC_tCrD(x) _SB_GETVALUE(x, S_MC_tCrD, M_MC_tCrD) -#define K_MC_tCrD_DEFAULT 2 -#define V_MC_tCrD_DEFAULT V_MC_tCrD(K_MC_tCrD_DEFAULT) - -#define S_MC_tRCD 0 -#define M_MC_tRCD _SB_MAKEMASK(4, S_MC_tRCD) -#define V_MC_tRCD(x) _SB_MAKEVALUE(x, S_MC_tRCD) -#define G_MC_tRCD(x) _SB_GETVALUE(x, S_MC_tRCD, M_MC_tRCD) -#define K_MC_tRCD_DEFAULT 3 -#define V_MC_tRCD_DEFAULT V_MC_tRCD(K_MC_tRCD_DEFAULT) - -#define V_MC_TIMING_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \ - V_MC_tRFC(K_MC_tRFC_DEFAULT) | \ - V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \ - V_MC_tRCr(K_MC_tRCr_DEFAULT) | \ - V_MC_tRCw(K_MC_tRCw_DEFAULT) | \ - V_MC_tRRD(K_MC_tRRD_DEFAULT) | \ - V_MC_tRP(K_MC_tRP_DEFAULT) | \ - V_MC_tCwD(K_MC_tCwD_DEFAULT) | \ - V_MC_tCrD(K_MC_tCrD_DEFAULT) | \ - V_MC_tRCD(K_MC_tRCD_DEFAULT) | \ - M_MC_r2rIDLE_TWOCYCLES +#define S_MC_tCrD 4 +#define M_MC_tCrD _SB_MAKEMASK(3, S_MC_tCrD) +#define V_MC_tCrD(x) _SB_MAKEVALUE(x, S_MC_tCrD) +#define G_MC_tCrD(x) _SB_GETVALUE(x, S_MC_tCrD, M_MC_tCrD) +#define K_MC_tCrD_DEFAULT 2 +#define V_MC_tCrD_DEFAULT V_MC_tCrD(K_MC_tCrD_DEFAULT) + +#define S_MC_tRCD 0 +#define M_MC_tRCD _SB_MAKEMASK(4, S_MC_tRCD) +#define V_MC_tRCD(x) _SB_MAKEVALUE(x, S_MC_tRCD) +#define G_MC_tRCD(x) _SB_GETVALUE(x, S_MC_tRCD, M_MC_tRCD) +#define K_MC_tRCD_DEFAULT 3 +#define V_MC_tRCD_DEFAULT V_MC_tRCD(K_MC_tRCD_DEFAULT) + +#define V_MC_TIMING_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \ + V_MC_tRFC(K_MC_tRFC_DEFAULT) | \ + V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \ + V_MC_tRCr(K_MC_tRCr_DEFAULT) | \ + V_MC_tRCw(K_MC_tRCw_DEFAULT) | \ + V_MC_tRRD(K_MC_tRRD_DEFAULT) | \ + V_MC_tRP(K_MC_tRP_DEFAULT) | \ + V_MC_tCwD(K_MC_tCwD_DEFAULT) | \ + V_MC_tCrD(K_MC_tCrD_DEFAULT) | \ + V_MC_tRCD(K_MC_tRCD_DEFAULT) | \ + M_MC_r2rIDLE_TWOCYCLES /* * Errata says these are not the default - * M_MC_w2rIDLE_TWOCYCLES | \ - * M_MC_r2wIDLE_TWOCYCLES | \ + * M_MC_w2rIDLE_TWOCYCLES | \ + * M_MC_r2wIDLE_TWOCYCLES | \ */ @@ -408,143 +408,143 @@ * Chip Select Start Address Register (Table 6-17) */ -#define S_MC_CS0_START 0 -#define M_MC_CS0_START _SB_MAKEMASK(16, S_MC_CS0_START) -#define V_MC_CS0_START(x) _SB_MAKEVALUE(x, S_MC_CS0_START) -#define G_MC_CS0_START(x) _SB_GETVALUE(x, S_MC_CS0_START, M_MC_CS0_START) +#define S_MC_CS0_START 0 +#define M_MC_CS0_START _SB_MAKEMASK(16, S_MC_CS0_START) +#define V_MC_CS0_START(x) _SB_MAKEVALUE(x, S_MC_CS0_START) +#define G_MC_CS0_START(x) _SB_GETVALUE(x, S_MC_CS0_START, M_MC_CS0_START) -#define S_MC_CS1_START 16 -#define M_MC_CS1_START _SB_MAKEMASK(16, S_MC_CS1_START) -#define V_MC_CS1_START(x) _SB_MAKEVALUE(x, S_MC_CS1_START) -#define G_MC_CS1_START(x) _SB_GETVALUE(x, S_MC_CS1_START, M_MC_CS1_START) +#define S_MC_CS1_START 16 +#define M_MC_CS1_START _SB_MAKEMASK(16, S_MC_CS1_START) +#define V_MC_CS1_START(x) _SB_MAKEVALUE(x, S_MC_CS1_START) +#define G_MC_CS1_START(x) _SB_GETVALUE(x, S_MC_CS1_START, M_MC_CS1_START) -#define S_MC_CS2_START 32 -#define M_MC_CS2_START _SB_MAKEMASK(16, S_MC_CS2_START) -#define V_MC_CS2_START(x) _SB_MAKEVALUE(x, S_MC_CS2_START) -#define G_MC_CS2_START(x) _SB_GETVALUE(x, S_MC_CS2_START, M_MC_CS2_START) +#define S_MC_CS2_START 32 +#define M_MC_CS2_START _SB_MAKEMASK(16, S_MC_CS2_START) +#define V_MC_CS2_START(x) _SB_MAKEVALUE(x, S_MC_CS2_START) +#define G_MC_CS2_START(x) _SB_GETVALUE(x, S_MC_CS2_START, M_MC_CS2_START) -#define S_MC_CS3_START 48 -#define M_MC_CS3_START _SB_MAKEMASK(16, S_MC_CS3_START) -#define V_MC_CS3_START(x) _SB_MAKEVALUE(x, S_MC_CS3_START) -#define G_MC_CS3_START(x) _SB_GETVALUE(x, S_MC_CS3_START, M_MC_CS3_START) +#define S_MC_CS3_START 48 +#define M_MC_CS3_START _SB_MAKEMASK(16, S_MC_CS3_START) +#define V_MC_CS3_START(x) _SB_MAKEVALUE(x, S_MC_CS3_START) +#define G_MC_CS3_START(x) _SB_GETVALUE(x, S_MC_CS3_START, M_MC_CS3_START) /* * Chip Select End Address Register (Table 6-18) */ -#define S_MC_CS0_END 0 -#define M_MC_CS0_END _SB_MAKEMASK(16, S_MC_CS0_END) -#define V_MC_CS0_END(x) _SB_MAKEVALUE(x, S_MC_CS0_END) -#define G_MC_CS0_END(x) _SB_GETVALUE(x, S_MC_CS0_END, M_MC_CS0_END) +#define S_MC_CS0_END 0 +#define M_MC_CS0_END _SB_MAKEMASK(16, S_MC_CS0_END) +#define V_MC_CS0_END(x) _SB_MAKEVALUE(x, S_MC_CS0_END) +#define G_MC_CS0_END(x) _SB_GETVALUE(x, S_MC_CS0_END, M_MC_CS0_END) -#define S_MC_CS1_END 16 -#define M_MC_CS1_END _SB_MAKEMASK(16, S_MC_CS1_END) -#define V_MC_CS1_END(x) _SB_MAKEVALUE(x, S_MC_CS1_END) -#define G_MC_CS1_END(x) _SB_GETVALUE(x, S_MC_CS1_END, M_MC_CS1_END) +#define S_MC_CS1_END 16 +#define M_MC_CS1_END _SB_MAKEMASK(16, S_MC_CS1_END) +#define V_MC_CS1_END(x) _SB_MAKEVALUE(x, S_MC_CS1_END) +#define G_MC_CS1_END(x) _SB_GETVALUE(x, S_MC_CS1_END, M_MC_CS1_END) -#define S_MC_CS2_END 32 -#define M_MC_CS2_END _SB_MAKEMASK(16, S_MC_CS2_END) -#define V_MC_CS2_END(x) _SB_MAKEVALUE(x, S_MC_CS2_END) -#define G_MC_CS2_END(x) _SB_GETVALUE(x, S_MC_CS2_END, M_MC_CS2_END) +#define S_MC_CS2_END 32 +#define M_MC_CS2_END _SB_MAKEMASK(16, S_MC_CS2_END) +#define V_MC_CS2_END(x) _SB_MAKEVALUE(x, S_MC_CS2_END) +#define G_MC_CS2_END(x) _SB_GETVALUE(x, S_MC_CS2_END, M_MC_CS2_END) -#define S_MC_CS3_END 48 -#define M_MC_CS3_END _SB_MAKEMASK(16, S_MC_CS3_END) -#define V_MC_CS3_END(x) _SB_MAKEVALUE(x, S_MC_CS3_END) -#define G_MC_CS3_END(x) _SB_GETVALUE(x, S_MC_CS3_END, M_MC_CS3_END) +#define S_MC_CS3_END 48 +#define M_MC_CS3_END _SB_MAKEMASK(16, S_MC_CS3_END) +#define V_MC_CS3_END(x) _SB_MAKEVALUE(x, S_MC_CS3_END) +#define G_MC_CS3_END(x) _SB_GETVALUE(x, S_MC_CS3_END, M_MC_CS3_END) /* * Chip Select Interleave Register (Table 6-19) */ -#define S_MC_INTLV_RESERVED 0 -#define M_MC_INTLV_RESERVED _SB_MAKEMASK(5, S_MC_INTLV_RESERVED) +#define S_MC_INTLV_RESERVED 0 +#define M_MC_INTLV_RESERVED _SB_MAKEMASK(5, S_MC_INTLV_RESERVED) -#define S_MC_INTERLEAVE 7 -#define M_MC_INTERLEAVE _SB_MAKEMASK(18, S_MC_INTERLEAVE) -#define V_MC_INTERLEAVE(x) _SB_MAKEVALUE(x, S_MC_INTERLEAVE) +#define S_MC_INTERLEAVE 7 +#define M_MC_INTERLEAVE _SB_MAKEMASK(18, S_MC_INTERLEAVE) +#define V_MC_INTERLEAVE(x) _SB_MAKEVALUE(x, S_MC_INTERLEAVE) -#define S_MC_INTLV_MBZ 25 -#define M_MC_INTLV_MBZ _SB_MAKEMASK(39, S_MC_INTLV_MBZ) +#define S_MC_INTLV_MBZ 25 +#define M_MC_INTLV_MBZ _SB_MAKEMASK(39, S_MC_INTLV_MBZ) /* * Row Address Bits Register (Table 6-20) */ -#define S_MC_RAS_RESERVED 0 -#define M_MC_RAS_RESERVED _SB_MAKEMASK(5, S_MC_RAS_RESERVED) +#define S_MC_RAS_RESERVED 0 +#define M_MC_RAS_RESERVED _SB_MAKEMASK(5, S_MC_RAS_RESERVED) -#define S_MC_RAS_SELECT 12 -#define M_MC_RAS_SELECT _SB_MAKEMASK(25, S_MC_RAS_SELECT) -#define V_MC_RAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_RAS_SELECT) +#define S_MC_RAS_SELECT 12 +#define M_MC_RAS_SELECT _SB_MAKEMASK(25, S_MC_RAS_SELECT) +#define V_MC_RAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_RAS_SELECT) -#define S_MC_RAS_MBZ 37 -#define M_MC_RAS_MBZ _SB_MAKEMASK(27, S_MC_RAS_MBZ) +#define S_MC_RAS_MBZ 37 +#define M_MC_RAS_MBZ _SB_MAKEMASK(27, S_MC_RAS_MBZ) /* * Column Address Bits Register (Table 6-21) */ -#define S_MC_CAS_RESERVED 0 -#define M_MC_CAS_RESERVED _SB_MAKEMASK(5, S_MC_CAS_RESERVED) +#define S_MC_CAS_RESERVED 0 +#define M_MC_CAS_RESERVED _SB_MAKEMASK(5, S_MC_CAS_RESERVED) -#define S_MC_CAS_SELECT 5 -#define M_MC_CAS_SELECT _SB_MAKEMASK(18, S_MC_CAS_SELECT) -#define V_MC_CAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_CAS_SELECT) +#define S_MC_CAS_SELECT 5 +#define M_MC_CAS_SELECT _SB_MAKEMASK(18, S_MC_CAS_SELECT) +#define V_MC_CAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_CAS_SELECT) -#define S_MC_CAS_MBZ 23 -#define M_MC_CAS_MBZ _SB_MAKEMASK(41, S_MC_CAS_MBZ) +#define S_MC_CAS_MBZ 23 +#define M_MC_CAS_MBZ _SB_MAKEMASK(41, S_MC_CAS_MBZ) /* * Bank Address Address Bits Register (Table 6-22) */ -#define S_MC_BA_RESERVED 0 -#define M_MC_BA_RESERVED _SB_MAKEMASK(5, S_MC_BA_RESERVED) +#define S_MC_BA_RESERVED 0 +#define M_MC_BA_RESERVED _SB_MAKEMASK(5, S_MC_BA_RESERVED) -#define S_MC_BA_SELECT 5 -#define M_MC_BA_SELECT _SB_MAKEMASK(20, S_MC_BA_SELECT) -#define V_MC_BA_SELECT(x) _SB_MAKEVALUE(x, S_MC_BA_SELECT) +#define S_MC_BA_SELECT 5 +#define M_MC_BA_SELECT _SB_MAKEMASK(20, S_MC_BA_SELECT) +#define V_MC_BA_SELECT(x) _SB_MAKEVALUE(x, S_MC_BA_SELECT) -#define S_MC_BA_MBZ 25 -#define M_MC_BA_MBZ _SB_MAKEMASK(39, S_MC_BA_MBZ) +#define S_MC_BA_MBZ 25 +#define M_MC_BA_MBZ _SB_MAKEMASK(39, S_MC_BA_MBZ) /* * Chip Select Attribute Register (Table 6-23) */ -#define K_MC_CS_ATTR_CLOSED 0 -#define K_MC_CS_ATTR_CASCHECK 1 -#define K_MC_CS_ATTR_HINT 2 -#define K_MC_CS_ATTR_OPEN 3 +#define K_MC_CS_ATTR_CLOSED 0 +#define K_MC_CS_ATTR_CASCHECK 1 +#define K_MC_CS_ATTR_HINT 2 +#define K_MC_CS_ATTR_OPEN 3 -#define S_MC_CS0_PAGE 0 -#define M_MC_CS0_PAGE _SB_MAKEMASK(2, S_MC_CS0_PAGE) -#define V_MC_CS0_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS0_PAGE) -#define G_MC_CS0_PAGE(x) _SB_GETVALUE(x, S_MC_CS0_PAGE, M_MC_CS0_PAGE) +#define S_MC_CS0_PAGE 0 +#define M_MC_CS0_PAGE _SB_MAKEMASK(2, S_MC_CS0_PAGE) +#define V_MC_CS0_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS0_PAGE) +#define G_MC_CS0_PAGE(x) _SB_GETVALUE(x, S_MC_CS0_PAGE, M_MC_CS0_PAGE) -#define S_MC_CS1_PAGE 16 -#define M_MC_CS1_PAGE _SB_MAKEMASK(2, S_MC_CS1_PAGE) -#define V_MC_CS1_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS1_PAGE) -#define G_MC_CS1_PAGE(x) _SB_GETVALUE(x, S_MC_CS1_PAGE, M_MC_CS1_PAGE) +#define S_MC_CS1_PAGE 16 +#define M_MC_CS1_PAGE _SB_MAKEMASK(2, S_MC_CS1_PAGE) +#define V_MC_CS1_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS1_PAGE) +#define G_MC_CS1_PAGE(x) _SB_GETVALUE(x, S_MC_CS1_PAGE, M_MC_CS1_PAGE) -#define S_MC_CS2_PAGE 32 -#define M_MC_CS2_PAGE _SB_MAKEMASK(2, S_MC_CS2_PAGE) -#define V_MC_CS2_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS2_PAGE) -#define G_MC_CS2_PAGE(x) _SB_GETVALUE(x, S_MC_CS2_PAGE, M_MC_CS2_PAGE) +#define S_MC_CS2_PAGE 32 +#define M_MC_CS2_PAGE _SB_MAKEMASK(2, S_MC_CS2_PAGE) +#define V_MC_CS2_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS2_PAGE) +#define G_MC_CS2_PAGE(x) _SB_GETVALUE(x, S_MC_CS2_PAGE, M_MC_CS2_PAGE) -#define S_MC_CS3_PAGE 48 -#define M_MC_CS3_PAGE _SB_MAKEMASK(2, S_MC_CS3_PAGE) -#define V_MC_CS3_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS3_PAGE) -#define G_MC_CS3_PAGE(x) _SB_GETVALUE(x, S_MC_CS3_PAGE, M_MC_CS3_PAGE) +#define S_MC_CS3_PAGE 48 +#define M_MC_CS3_PAGE _SB_MAKEMASK(2, S_MC_CS3_PAGE) +#define V_MC_CS3_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS3_PAGE) +#define G_MC_CS3_PAGE(x) _SB_GETVALUE(x, S_MC_CS3_PAGE, M_MC_CS3_PAGE) /* * ECC Test ECC Register (Table 6-25) */ -#define S_MC_ECC_INVERT 0 -#define M_MC_ECC_INVERT _SB_MAKEMASK(8, S_MC_ECC_INVERT) +#define S_MC_ECC_INVERT 0 +#define M_MC_ECC_INVERT _SB_MAKEMASK(8, S_MC_ECC_INVERT) #endif diff --git a/arch/mips/include/asm/sibyte/sb1250_regs.h b/arch/mips/include/asm/sibyte/sb1250_regs.h index 29b9f0b..ee86ca0 100644 --- a/arch/mips/include/asm/sibyte/sb1250_regs.h +++ b/arch/mips/include/asm/sibyte/sb1250_regs.h @@ -1,7 +1,7 @@ /* ********************************************************************* * SB1250 Board Support Package * - * Register Definitions File: sb1250_regs.h + * Register Definitions File: sb1250_regs.h * * This module contains the addresses of the on-chip peripherals * on the SB1250. @@ -61,45 +61,45 @@ */ #if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ -#define A_MC_BASE_0 0x0010051000 -#define A_MC_BASE_1 0x0010052000 -#define MC_REGISTER_SPACING 0x1000 +#define A_MC_BASE_0 0x0010051000 +#define A_MC_BASE_1 0x0010052000 +#define MC_REGISTER_SPACING 0x1000 -#define A_MC_BASE(ctlid) ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0) +#define A_MC_BASE(ctlid) ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0) #define A_MC_REGISTER(ctlid, reg) (A_MC_BASE(ctlid)+(reg)) -#define R_MC_CONFIG 0x0000000100 -#define R_MC_DRAMCMD 0x0000000120 -#define R_MC_DRAMMODE 0x0000000140 -#define R_MC_TIMING1 0x0000000160 -#define R_MC_TIMING2 0x0000000180 -#define R_MC_CS_START 0x00000001A0 -#define R_MC_CS_END 0x00000001C0 -#define R_MC_CS_INTERLEAVE 0x00000001E0 -#define S_MC_CS_STARTEND 16 - -#define R_MC_CSX_BASE 0x0000000200 -#define R_MC_CSX_ROW 0x0000000000 /* relative to CSX_BASE, above */ -#define R_MC_CSX_COL 0x0000000020 /* relative to CSX_BASE, above */ -#define R_MC_CSX_BA 0x0000000040 /* relative to CSX_BASE, above */ -#define MC_CSX_SPACING 0x0000000060 /* relative to CSX_BASE, above */ - -#define R_MC_CS0_ROW 0x0000000200 -#define R_MC_CS0_COL 0x0000000220 -#define R_MC_CS0_BA 0x0000000240 -#define R_MC_CS1_ROW 0x0000000260 -#define R_MC_CS1_COL 0x0000000280 -#define R_MC_CS1_BA 0x00000002A0 -#define R_MC_CS2_ROW 0x00000002C0 -#define R_MC_CS2_COL 0x00000002E0 -#define R_MC_CS2_BA 0x0000000300 -#define R_MC_CS3_ROW 0x0000000320 -#define R_MC_CS3_COL 0x0000000340 -#define R_MC_CS3_BA 0x0000000360 -#define R_MC_CS_ATTR 0x0000000380 -#define R_MC_TEST_DATA 0x0000000400 -#define R_MC_TEST_ECC 0x0000000420 -#define R_MC_MCLK_CFG 0x0000000500 +#define R_MC_CONFIG 0x0000000100 +#define R_MC_DRAMCMD 0x0000000120 +#define R_MC_DRAMMODE 0x0000000140 +#define R_MC_TIMING1 0x0000000160 +#define R_MC_TIMING2 0x0000000180 +#define R_MC_CS_START 0x00000001A0 +#define R_MC_CS_END 0x00000001C0 +#define R_MC_CS_INTERLEAVE 0x00000001E0 +#define S_MC_CS_STARTEND 16 + +#define R_MC_CSX_BASE 0x0000000200 +#define R_MC_CSX_ROW 0x0000000000 /* relative to CSX_BASE, above */ +#define R_MC_CSX_COL 0x0000000020 /* relative to CSX_BASE, above */ +#define R_MC_CSX_BA 0x0000000040 /* relative to CSX_BASE, above */ +#define MC_CSX_SPACING 0x0000000060 /* relative to CSX_BASE, above */ + +#define R_MC_CS0_ROW 0x0000000200 +#define R_MC_CS0_COL 0x0000000220 +#define R_MC_CS0_BA 0x0000000240 +#define R_MC_CS1_ROW 0x0000000260 +#define R_MC_CS1_COL 0x0000000280 +#define R_MC_CS1_BA 0x00000002A0 +#define R_MC_CS2_ROW 0x00000002C0 +#define R_MC_CS2_COL 0x00000002E0 +#define R_MC_CS2_BA 0x0000000300 +#define R_MC_CS3_ROW 0x0000000320 +#define R_MC_CS3_COL 0x0000000340 +#define R_MC_CS3_BA 0x0000000360 +#define R_MC_CS_ATTR 0x0000000380 +#define R_MC_TEST_DATA 0x0000000400 +#define R_MC_TEST_ECC 0x0000000420 +#define R_MC_MCLK_CFG 0x0000000500 #endif /* 1250 & 112x */ @@ -109,14 +109,14 @@ #if SIBYTE_HDR_FEATURE_1250_112x /* This L2C only on 1250/112x */ -#define A_L2_READ_TAG 0x0010040018 -#define A_L2_ECC_TAG 0x0010040038 +#define A_L2_READ_TAG 0x0010040018 +#define A_L2_ECC_TAG 0x0010040038 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define A_L2_READ_MISC 0x0010040058 +#define A_L2_READ_MISC 0x0010040058 #endif /* 1250 PASS3 || 112x PASS1 */ -#define A_L2_WAY_DISABLE 0x0010041000 -#define A_L2_MAKEDISABLE(x) (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8)) -#define A_L2_MGMT_TAG_BASE 0x00D0000000 +#define A_L2_WAY_DISABLE 0x0010041000 +#define A_L2_MAKEDISABLE(x) (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8)) +#define A_L2_MGMT_TAG_BASE 0x00D0000000 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define A_L2_CACHE_DISABLE 0x0010042000 @@ -124,10 +124,10 @@ #define A_L2_MISC_CONFIG 0x0010043000 #endif /* 1250 PASS2 || 112x PASS1 */ -/* Backward-compatibility definitions. */ +/* Backward-compatibility definitions. */ /* XXX: discourage people from using these constants. */ -#define A_L2_READ_ADDRESS A_L2_READ_TAG -#define A_L2_EEC_ADDRESS A_L2_ECC_TAG +#define A_L2_READ_ADDRESS A_L2_READ_TAG +#define A_L2_EEC_ADDRESS A_L2_ECC_TAG #endif @@ -137,8 +137,8 @@ ********************************************************************* */ #if SIBYTE_HDR_FEATURE_1250_112x /* This PCI/HT only on 1250/112x */ -#define A_PCI_TYPE00_HEADER 0x00DE000000 -#define A_PCI_TYPE01_HEADER 0x00DE000800 +#define A_PCI_TYPE00_HEADER 0x00DE000000 +#define A_PCI_TYPE01_HEADER 0x00DE000800 #endif @@ -146,121 +146,121 @@ * Ethernet DMA and MACs ********************************************************************* */ -#define A_MAC_BASE_0 0x0010064000 -#define A_MAC_BASE_1 0x0010065000 +#define A_MAC_BASE_0 0x0010064000 +#define A_MAC_BASE_1 0x0010065000 #if SIBYTE_HDR_FEATURE_CHIP(1250) -#define A_MAC_BASE_2 0x0010066000 +#define A_MAC_BASE_2 0x0010066000 #endif /* 1250 */ -#define MAC_SPACING 0x1000 -#define MAC_DMA_TXRX_SPACING 0x0400 -#define MAC_DMA_CHANNEL_SPACING 0x0100 -#define DMA_RX 0 -#define DMA_TX 1 +#define MAC_SPACING 0x1000 +#define MAC_DMA_TXRX_SPACING 0x0400 +#define MAC_DMA_CHANNEL_SPACING 0x0100 +#define DMA_RX 0 +#define DMA_TX 1 #define MAC_NUM_DMACHAN 2 /* channels per direction */ /* XXX: not correct; depends on SOC type. */ -#define MAC_NUM_PORTS 3 +#define MAC_NUM_PORTS 3 -#define A_MAC_CHANNEL_BASE(macnum) \ - (A_MAC_BASE_0 + \ - MAC_SPACING*(macnum)) +#define A_MAC_CHANNEL_BASE(macnum) \ + (A_MAC_BASE_0 + \ + MAC_SPACING*(macnum)) -#define A_MAC_REGISTER(macnum,reg) \ - (A_MAC_BASE_0 + \ - MAC_SPACING*(macnum) + (reg)) +#define A_MAC_REGISTER(macnum,reg) \ + (A_MAC_BASE_0 + \ + MAC_SPACING*(macnum) + (reg)) #define R_MAC_DMA_CHANNELS 0x800 /* Relative to A_MAC_CHANNEL_BASE */ #define A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) \ - ((A_MAC_CHANNEL_BASE(macnum)) + \ - R_MAC_DMA_CHANNELS + \ - (MAC_DMA_TXRX_SPACING*(txrx)) + \ - (MAC_DMA_CHANNEL_SPACING*(chan))) + ((A_MAC_CHANNEL_BASE(macnum)) + \ + R_MAC_DMA_CHANNELS + \ + (MAC_DMA_TXRX_SPACING*(txrx)) + \ + (MAC_DMA_CHANNEL_SPACING*(chan))) #define R_MAC_DMA_CHANNEL_BASE(txrx, chan) \ - (R_MAC_DMA_CHANNELS + \ - (MAC_DMA_TXRX_SPACING*(txrx)) + \ - (MAC_DMA_CHANNEL_SPACING*(chan))) + (R_MAC_DMA_CHANNELS + \ + (MAC_DMA_TXRX_SPACING*(txrx)) + \ + (MAC_DMA_CHANNEL_SPACING*(chan))) -#define A_MAC_DMA_REGISTER(macnum, txrx, chan, reg) \ - (A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) + \ - (reg)) +#define A_MAC_DMA_REGISTER(macnum, txrx, chan, reg) \ + (A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) + \ + (reg)) -#define R_MAC_DMA_REGISTER(txrx, chan, reg) \ - (R_MAC_DMA_CHANNEL_BASE(txrx, chan) + \ - (reg)) +#define R_MAC_DMA_REGISTER(txrx, chan, reg) \ + (R_MAC_DMA_CHANNEL_BASE(txrx, chan) + \ + (reg)) /* * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE */ -#define R_MAC_DMA_CONFIG0 0x00000000 -#define R_MAC_DMA_CONFIG1 0x00000008 -#define R_MAC_DMA_DSCR_BASE 0x00000010 -#define R_MAC_DMA_DSCR_CNT 0x00000018 -#define R_MAC_DMA_CUR_DSCRA 0x00000020 -#define R_MAC_DMA_CUR_DSCRB 0x00000028 -#define R_MAC_DMA_CUR_DSCRADDR 0x00000030 +#define R_MAC_DMA_CONFIG0 0x00000000 +#define R_MAC_DMA_CONFIG1 0x00000008 +#define R_MAC_DMA_DSCR_BASE 0x00000010 +#define R_MAC_DMA_DSCR_CNT 0x00000018 +#define R_MAC_DMA_CUR_DSCRA 0x00000020 +#define R_MAC_DMA_CUR_DSCRB 0x00000028 +#define R_MAC_DMA_CUR_DSCRADDR 0x00000030 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) -#define R_MAC_DMA_OODPKTLOST_RX 0x00000038 /* rx only */ +#define R_MAC_DMA_OODPKTLOST_RX 0x00000038 /* rx only */ #endif /* 1250 PASS3 || 112x PASS1 */ /* * RMON Counters */ -#define R_MAC_RMON_TX_BYTES 0x00000000 -#define R_MAC_RMON_COLLISIONS 0x00000008 -#define R_MAC_RMON_LATE_COL 0x00000010 -#define R_MAC_RMON_EX_COL 0x00000018 -#define R_MAC_RMON_FCS_ERROR 0x00000020 -#define R_MAC_RMON_TX_ABORT 0x00000028 +#define R_MAC_RMON_TX_BYTES 0x00000000 +#define R_MAC_RMON_COLLISIONS 0x00000008 +#define R_MAC_RMON_LATE_COL 0x00000010 +#define R_MAC_RMON_EX_COL 0x00000018 +#define R_MAC_RMON_FCS_ERROR 0x00000020 +#define R_MAC_RMON_TX_ABORT 0x00000028 /* Counter #6 (0x30) now reserved */ -#define R_MAC_RMON_TX_BAD 0x00000038 -#define R_MAC_RMON_TX_GOOD 0x00000040 -#define R_MAC_RMON_TX_RUNT 0x00000048 -#define R_MAC_RMON_TX_OVERSIZE 0x00000050 -#define R_MAC_RMON_RX_BYTES 0x00000080 -#define R_MAC_RMON_RX_MCAST 0x00000088 -#define R_MAC_RMON_RX_BCAST 0x00000090 -#define R_MAC_RMON_RX_BAD 0x00000098 -#define R_MAC_RMON_RX_GOOD 0x000000A0 -#define R_MAC_RMON_RX_RUNT 0x000000A8 -#define R_MAC_RMON_RX_OVERSIZE 0x000000B0 -#define R_MAC_RMON_RX_FCS_ERROR 0x000000B8 -#define R_MAC_RMON_RX_LENGTH_ERROR 0x000000C0 -#define R_MAC_RMON_RX_CODE_ERROR 0x000000C8 -#define R_MAC_RMON_RX_ALIGN_ERROR 0x000000D0 +#define R_MAC_RMON_TX_BAD 0x00000038 +#define R_MAC_RMON_TX_GOOD 0x00000040 +#define R_MAC_RMON_TX_RUNT 0x00000048 +#define R_MAC_RMON_TX_OVERSIZE 0x00000050 +#define R_MAC_RMON_RX_BYTES 0x00000080 +#define R_MAC_RMON_RX_MCAST 0x00000088 +#define R_MAC_RMON_RX_BCAST 0x00000090 +#define R_MAC_RMON_RX_BAD 0x00000098 +#define R_MAC_RMON_RX_GOOD 0x000000A0 +#define R_MAC_RMON_RX_RUNT 0x000000A8 +#define R_MAC_RMON_RX_OVERSIZE 0x000000B0 +#define R_MAC_RMON_RX_FCS_ERROR 0x000000B8 +#define R_MAC_RMON_RX_LENGTH_ERROR 0x000000C0 +#define R_MAC_RMON_RX_CODE_ERROR 0x000000C8 +#define R_MAC_RMON_RX_ALIGN_ERROR 0x000000D0 /* Updated to spec 0.2 */ -#define R_MAC_CFG 0x00000100 -#define R_MAC_THRSH_CFG 0x00000108 -#define R_MAC_VLANTAG 0x00000110 -#define R_MAC_FRAMECFG 0x00000118 -#define R_MAC_EOPCNT 0x00000120 -#define R_MAC_FIFO_PTRS 0x00000128 -#define R_MAC_ADFILTER_CFG 0x00000200 -#define R_MAC_ETHERNET_ADDR 0x00000208 -#define R_MAC_PKT_TYPE 0x00000210 +#define R_MAC_CFG 0x00000100 +#define R_MAC_THRSH_CFG 0x00000108 +#define R_MAC_VLANTAG 0x00000110 +#define R_MAC_FRAMECFG 0x00000118 +#define R_MAC_EOPCNT 0x00000120 +#define R_MAC_FIFO_PTRS 0x00000128 +#define R_MAC_ADFILTER_CFG 0x00000200 +#define R_MAC_ETHERNET_ADDR 0x00000208 +#define R_MAC_PKT_TYPE 0x00000210 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define R_MAC_ADMASK0 0x00000218 #define R_MAC_ADMASK1 0x00000220 #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define R_MAC_HASH_BASE 0x00000240 -#define R_MAC_ADDR_BASE 0x00000280 -#define R_MAC_CHLO0_BASE 0x00000300 -#define R_MAC_CHUP0_BASE 0x00000320 -#define R_MAC_ENABLE 0x00000400 -#define R_MAC_STATUS 0x00000408 -#define R_MAC_INT_MASK 0x00000410 -#define R_MAC_TXD_CTL 0x00000420 -#define R_MAC_MDIO 0x00000428 +#define R_MAC_HASH_BASE 0x00000240 +#define R_MAC_ADDR_BASE 0x00000280 +#define R_MAC_CHLO0_BASE 0x00000300 +#define R_MAC_CHUP0_BASE 0x00000320 +#define R_MAC_ENABLE 0x00000400 +#define R_MAC_STATUS 0x00000408 +#define R_MAC_INT_MASK 0x00000410 +#define R_MAC_TXD_CTL 0x00000420 +#define R_MAC_MDIO 0x00000428 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define R_MAC_STATUS1 0x00000430 +#define R_MAC_STATUS1 0x00000430 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ -#define R_MAC_DEBUG_STATUS 0x00000448 +#define R_MAC_DEBUG_STATUS 0x00000448 #define MAC_HASH_COUNT 8 #define MAC_ADDR_COUNT 8 @@ -273,11 +273,11 @@ #if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */ -#define R_DUART_NUM_PORTS 2 +#define R_DUART_NUM_PORTS 2 -#define A_DUART 0x0010060000 +#define A_DUART 0x0010060000 -#define DUART_CHANREG_SPACING 0x100 +#define DUART_CHANREG_SPACING 0x100 #define A_DUART_CHANREG(chan, reg) \ (A_DUART + DUART_CHANREG_SPACING * ((chan) + 1) + (reg)) @@ -341,44 +341,44 @@ * These constants are the absolute addresses. */ -#define A_DUART_MODE_REG_1_A 0x0010060100 -#define A_DUART_MODE_REG_2_A 0x0010060110 -#define A_DUART_STATUS_A 0x0010060120 -#define A_DUART_CLK_SEL_A 0x0010060130 -#define A_DUART_CMD_A 0x0010060150 -#define A_DUART_RX_HOLD_A 0x0010060160 -#define A_DUART_TX_HOLD_A 0x0010060170 - -#define A_DUART_MODE_REG_1_B 0x0010060200 -#define A_DUART_MODE_REG_2_B 0x0010060210 -#define A_DUART_STATUS_B 0x0010060220 -#define A_DUART_CLK_SEL_B 0x0010060230 -#define A_DUART_CMD_B 0x0010060250 -#define A_DUART_RX_HOLD_B 0x0010060260 -#define A_DUART_TX_HOLD_B 0x0010060270 - -#define A_DUART_INPORT_CHNG 0x0010060300 -#define A_DUART_AUX_CTRL 0x0010060310 -#define A_DUART_ISR_A 0x0010060320 -#define A_DUART_IMR_A 0x0010060330 -#define A_DUART_ISR_B 0x0010060340 -#define A_DUART_IMR_B 0x0010060350 -#define A_DUART_OUT_PORT 0x0010060360 -#define A_DUART_OPCR 0x0010060370 -#define A_DUART_IN_PORT 0x0010060380 -#define A_DUART_ISR 0x0010060390 -#define A_DUART_IMR 0x00100603A0 -#define A_DUART_SET_OPR 0x00100603B0 -#define A_DUART_CLEAR_OPR 0x00100603C0 -#define A_DUART_INPORT_CHNG_A 0x00100603D0 -#define A_DUART_INPORT_CHNG_B 0x00100603E0 +#define A_DUART_MODE_REG_1_A 0x0010060100 +#define A_DUART_MODE_REG_2_A 0x0010060110 +#define A_DUART_STATUS_A 0x0010060120 +#define A_DUART_CLK_SEL_A 0x0010060130 +#define A_DUART_CMD_A 0x0010060150 +#define A_DUART_RX_HOLD_A 0x0010060160 +#define A_DUART_TX_HOLD_A 0x0010060170 + +#define A_DUART_MODE_REG_1_B 0x0010060200 +#define A_DUART_MODE_REG_2_B 0x0010060210 +#define A_DUART_STATUS_B 0x0010060220 +#define A_DUART_CLK_SEL_B 0x0010060230 +#define A_DUART_CMD_B 0x0010060250 +#define A_DUART_RX_HOLD_B 0x0010060260 +#define A_DUART_TX_HOLD_B 0x0010060270 + +#define A_DUART_INPORT_CHNG 0x0010060300 +#define A_DUART_AUX_CTRL 0x0010060310 +#define A_DUART_ISR_A 0x0010060320 +#define A_DUART_IMR_A 0x0010060330 +#define A_DUART_ISR_B 0x0010060340 +#define A_DUART_IMR_B 0x0010060350 +#define A_DUART_OUT_PORT 0x0010060360 +#define A_DUART_OPCR 0x0010060370 +#define A_DUART_IN_PORT 0x0010060380 +#define A_DUART_ISR 0x0010060390 +#define A_DUART_IMR 0x00100603A0 +#define A_DUART_SET_OPR 0x00100603B0 +#define A_DUART_CLEAR_OPR 0x00100603C0 +#define A_DUART_INPORT_CHNG_A 0x00100603D0 +#define A_DUART_INPORT_CHNG_B 0x00100603E0 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define A_DUART_FULL_CTL_A 0x0010060140 #define A_DUART_FULL_CTL_B 0x0010060240 -#define A_DUART_OPCR_A 0x0010060180 -#define A_DUART_OPCR_B 0x0010060280 +#define A_DUART_OPCR_A 0x0010060180 +#define A_DUART_OPCR_B 0x0010060280 #define A_DUART_INPORT_CHNG_DEBUG 0x00100603F0 #endif /* 1250 PASS2 || 112x PASS1 */ @@ -391,94 +391,94 @@ #if SIBYTE_HDR_FEATURE_1250_112x /* sync serial only on 1250/112x */ -#define A_SER_BASE_0 0x0010060400 -#define A_SER_BASE_1 0x0010060800 -#define SER_SPACING 0x400 +#define A_SER_BASE_0 0x0010060400 +#define A_SER_BASE_1 0x0010060800 +#define SER_SPACING 0x400 -#define SER_DMA_TXRX_SPACING 0x80 +#define SER_DMA_TXRX_SPACING 0x80 -#define SER_NUM_PORTS 2 +#define SER_NUM_PORTS 2 -#define A_SER_CHANNEL_BASE(sernum) \ - (A_SER_BASE_0 + \ - SER_SPACING*(sernum)) +#define A_SER_CHANNEL_BASE(sernum) \ + (A_SER_BASE_0 + \ + SER_SPACING*(sernum)) -#define A_SER_REGISTER(sernum,reg) \ - (A_SER_BASE_0 + \ - SER_SPACING*(sernum) + (reg)) +#define A_SER_REGISTER(sernum,reg) \ + (A_SER_BASE_0 + \ + SER_SPACING*(sernum) + (reg)) #define R_SER_DMA_CHANNELS 0 /* Relative to A_SER_BASE_x */ #define A_SER_DMA_CHANNEL_BASE(sernum,txrx) \ - ((A_SER_CHANNEL_BASE(sernum)) + \ - R_SER_DMA_CHANNELS + \ - (SER_DMA_TXRX_SPACING*(txrx))) + ((A_SER_CHANNEL_BASE(sernum)) + \ + R_SER_DMA_CHANNELS + \ + (SER_DMA_TXRX_SPACING*(txrx))) -#define A_SER_DMA_REGISTER(sernum, txrx, reg) \ - (A_SER_DMA_CHANNEL_BASE(sernum, txrx) + \ - (reg)) +#define A_SER_DMA_REGISTER(sernum, txrx, reg) \ + (A_SER_DMA_CHANNEL_BASE(sernum, txrx) + \ + (reg)) /* * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE */ -#define R_SER_DMA_CONFIG0 0x00000000 -#define R_SER_DMA_CONFIG1 0x00000008 -#define R_SER_DMA_DSCR_BASE 0x00000010 -#define R_SER_DMA_DSCR_CNT 0x00000018 -#define R_SER_DMA_CUR_DSCRA 0x00000020 -#define R_SER_DMA_CUR_DSCRB 0x00000028 -#define R_SER_DMA_CUR_DSCRADDR 0x00000030 - -#define R_SER_DMA_CONFIG0_RX 0x00000000 -#define R_SER_DMA_CONFIG1_RX 0x00000008 -#define R_SER_DMA_DSCR_BASE_RX 0x00000010 -#define R_SER_DMA_DSCR_COUNT_RX 0x00000018 -#define R_SER_DMA_CUR_DSCR_A_RX 0x00000020 -#define R_SER_DMA_CUR_DSCR_B_RX 0x00000028 +#define R_SER_DMA_CONFIG0 0x00000000 +#define R_SER_DMA_CONFIG1 0x00000008 +#define R_SER_DMA_DSCR_BASE 0x00000010 +#define R_SER_DMA_DSCR_CNT 0x00000018 +#define R_SER_DMA_CUR_DSCRA 0x00000020 +#define R_SER_DMA_CUR_DSCRB 0x00000028 +#define R_SER_DMA_CUR_DSCRADDR 0x00000030 + +#define R_SER_DMA_CONFIG0_RX 0x00000000 +#define R_SER_DMA_CONFIG1_RX 0x00000008 +#define R_SER_DMA_DSCR_BASE_RX 0x00000010 +#define R_SER_DMA_DSCR_COUNT_RX 0x00000018 +#define R_SER_DMA_CUR_DSCR_A_RX 0x00000020 +#define R_SER_DMA_CUR_DSCR_B_RX 0x00000028 #define R_SER_DMA_CUR_DSCR_ADDR_RX 0x00000030 -#define R_SER_DMA_CONFIG0_TX 0x00000080 -#define R_SER_DMA_CONFIG1_TX 0x00000088 -#define R_SER_DMA_DSCR_BASE_TX 0x00000090 -#define R_SER_DMA_DSCR_COUNT_TX 0x00000098 -#define R_SER_DMA_CUR_DSCR_A_TX 0x000000A0 -#define R_SER_DMA_CUR_DSCR_B_TX 0x000000A8 +#define R_SER_DMA_CONFIG0_TX 0x00000080 +#define R_SER_DMA_CONFIG1_TX 0x00000088 +#define R_SER_DMA_DSCR_BASE_TX 0x00000090 +#define R_SER_DMA_DSCR_COUNT_TX 0x00000098 +#define R_SER_DMA_CUR_DSCR_A_TX 0x000000A0 +#define R_SER_DMA_CUR_DSCR_B_TX 0x000000A8 #define R_SER_DMA_CUR_DSCR_ADDR_TX 0x000000B0 -#define R_SER_MODE 0x00000100 -#define R_SER_MINFRM_SZ 0x00000108 -#define R_SER_MAXFRM_SZ 0x00000110 -#define R_SER_ADDR 0x00000118 -#define R_SER_USR0_ADDR 0x00000120 -#define R_SER_USR1_ADDR 0x00000128 -#define R_SER_USR2_ADDR 0x00000130 -#define R_SER_USR3_ADDR 0x00000138 -#define R_SER_CMD 0x00000140 -#define R_SER_TX_RD_THRSH 0x00000160 -#define R_SER_TX_WR_THRSH 0x00000168 -#define R_SER_RX_RD_THRSH 0x00000170 +#define R_SER_MODE 0x00000100 +#define R_SER_MINFRM_SZ 0x00000108 +#define R_SER_MAXFRM_SZ 0x00000110 +#define R_SER_ADDR 0x00000118 +#define R_SER_USR0_ADDR 0x00000120 +#define R_SER_USR1_ADDR 0x00000128 +#define R_SER_USR2_ADDR 0x00000130 +#define R_SER_USR3_ADDR 0x00000138 +#define R_SER_CMD 0x00000140 +#define R_SER_TX_RD_THRSH 0x00000160 +#define R_SER_TX_WR_THRSH 0x00000168 +#define R_SER_RX_RD_THRSH 0x00000170 #define R_SER_LINE_MODE 0x00000178 -#define R_SER_DMA_ENABLE 0x00000180 -#define R_SER_INT_MASK 0x00000190 -#define R_SER_STATUS 0x00000188 -#define R_SER_STATUS_DEBUG 0x000001A8 -#define R_SER_RX_TABLE_BASE 0x00000200 -#define SER_RX_TABLE_COUNT 16 -#define R_SER_TX_TABLE_BASE 0x00000300 -#define SER_TX_TABLE_COUNT 16 +#define R_SER_DMA_ENABLE 0x00000180 +#define R_SER_INT_MASK 0x00000190 +#define R_SER_STATUS 0x00000188 +#define R_SER_STATUS_DEBUG 0x000001A8 +#define R_SER_RX_TABLE_BASE 0x00000200 +#define SER_RX_TABLE_COUNT 16 +#define R_SER_TX_TABLE_BASE 0x00000300 +#define SER_TX_TABLE_COUNT 16 /* RMON Counters */ -#define R_SER_RMON_TX_BYTE_LO 0x000001C0 -#define R_SER_RMON_TX_BYTE_HI 0x000001C8 -#define R_SER_RMON_RX_BYTE_LO 0x000001D0 -#define R_SER_RMON_RX_BYTE_HI 0x000001D8 -#define R_SER_RMON_TX_UNDERRUN 0x000001E0 -#define R_SER_RMON_RX_OVERFLOW 0x000001E8 -#define R_SER_RMON_RX_ERRORS 0x000001F0 -#define R_SER_RMON_RX_BADADDR 0x000001F8 +#define R_SER_RMON_TX_BYTE_LO 0x000001C0 +#define R_SER_RMON_TX_BYTE_HI 0x000001C8 +#define R_SER_RMON_RX_BYTE_LO 0x000001D0 +#define R_SER_RMON_RX_BYTE_HI 0x000001D8 +#define R_SER_RMON_TX_UNDERRUN 0x000001E0 +#define R_SER_RMON_RX_OVERFLOW 0x000001E8 +#define R_SER_RMON_RX_ERRORS 0x000001F0 +#define R_SER_RMON_RX_BADADDR 0x000001F8 #endif /* 1250/112x */ @@ -486,38 +486,38 @@ * Generic Bus Registers ********************************************************************* */ -#define IO_EXT_CFG_COUNT 8 +#define IO_EXT_CFG_COUNT 8 #define A_IO_EXT_BASE 0x0010061000 #define A_IO_EXT_REG(r) (A_IO_EXT_BASE + (r)) -#define A_IO_EXT_CFG_BASE 0x0010061000 -#define A_IO_EXT_MULT_SIZE_BASE 0x0010061100 +#define A_IO_EXT_CFG_BASE 0x0010061000 +#define A_IO_EXT_MULT_SIZE_BASE 0x0010061100 #define A_IO_EXT_START_ADDR_BASE 0x0010061200 -#define A_IO_EXT_TIME_CFG0_BASE 0x0010061600 -#define A_IO_EXT_TIME_CFG1_BASE 0x0010061700 +#define A_IO_EXT_TIME_CFG0_BASE 0x0010061600 +#define A_IO_EXT_TIME_CFG1_BASE 0x0010061700 #define IO_EXT_REGISTER_SPACING 8 #define A_IO_EXT_CS_BASE(cs) (A_IO_EXT_CFG_BASE+IO_EXT_REGISTER_SPACING*(cs)) #define R_IO_EXT_REG(reg, cs) ((cs)*IO_EXT_REGISTER_SPACING + (reg)) #define R_IO_EXT_CFG 0x0000 -#define R_IO_EXT_MULT_SIZE 0x0100 +#define R_IO_EXT_MULT_SIZE 0x0100 #define R_IO_EXT_START_ADDR 0x0200 -#define R_IO_EXT_TIME_CFG0 0x0600 -#define R_IO_EXT_TIME_CFG1 0x0700 - - -#define A_IO_INTERRUPT_STATUS 0x0010061A00 -#define A_IO_INTERRUPT_DATA0 0x0010061A10 -#define A_IO_INTERRUPT_DATA1 0x0010061A18 -#define A_IO_INTERRUPT_DATA2 0x0010061A20 -#define A_IO_INTERRUPT_DATA3 0x0010061A28 -#define A_IO_INTERRUPT_ADDR0 0x0010061A30 -#define A_IO_INTERRUPT_ADDR1 0x0010061A40 -#define A_IO_INTERRUPT_PARITY 0x0010061A50 -#define A_IO_PCMCIA_CFG 0x0010061A60 -#define A_IO_PCMCIA_STATUS 0x0010061A70 +#define R_IO_EXT_TIME_CFG0 0x0600 +#define R_IO_EXT_TIME_CFG1 0x0700 + + +#define A_IO_INTERRUPT_STATUS 0x0010061A00 +#define A_IO_INTERRUPT_DATA0 0x0010061A10 +#define A_IO_INTERRUPT_DATA1 0x0010061A18 +#define A_IO_INTERRUPT_DATA2 0x0010061A20 +#define A_IO_INTERRUPT_DATA3 0x0010061A28 +#define A_IO_INTERRUPT_ADDR0 0x0010061A30 +#define A_IO_INTERRUPT_ADDR1 0x0010061A40 +#define A_IO_INTERRUPT_PARITY 0x0010061A50 +#define A_IO_PCMCIA_CFG 0x0010061A60 +#define A_IO_PCMCIA_STATUS 0x0010061A70 #define A_IO_DRIVE_0 0x0010061300 #define A_IO_DRIVE_1 0x0010061308 #define A_IO_DRIVE_2 0x0010061310 @@ -527,76 +527,76 @@ #define R_IO_DRIVE(x) ((x)*IO_DRIVE_REGISTER_SPACING) #define A_IO_DRIVE(x) (A_IO_DRIVE_BASE + R_IO_DRIVE(x)) -#define R_IO_INTERRUPT_STATUS 0x0A00 -#define R_IO_INTERRUPT_DATA0 0x0A10 -#define R_IO_INTERRUPT_DATA1 0x0A18 -#define R_IO_INTERRUPT_DATA2 0x0A20 -#define R_IO_INTERRUPT_DATA3 0x0A28 -#define R_IO_INTERRUPT_ADDR0 0x0A30 -#define R_IO_INTERRUPT_ADDR1 0x0A40 -#define R_IO_INTERRUPT_PARITY 0x0A50 -#define R_IO_PCMCIA_CFG 0x0A60 -#define R_IO_PCMCIA_STATUS 0x0A70 +#define R_IO_INTERRUPT_STATUS 0x0A00 +#define R_IO_INTERRUPT_DATA0 0x0A10 +#define R_IO_INTERRUPT_DATA1 0x0A18 +#define R_IO_INTERRUPT_DATA2 0x0A20 +#define R_IO_INTERRUPT_DATA3 0x0A28 +#define R_IO_INTERRUPT_ADDR0 0x0A30 +#define R_IO_INTERRUPT_ADDR1 0x0A40 +#define R_IO_INTERRUPT_PARITY 0x0A50 +#define R_IO_PCMCIA_CFG 0x0A60 +#define R_IO_PCMCIA_STATUS 0x0A70 /* ********************************************************************* * GPIO Registers ********************************************************************* */ -#define A_GPIO_CLR_EDGE 0x0010061A80 -#define A_GPIO_INT_TYPE 0x0010061A88 -#define A_GPIO_INPUT_INVERT 0x0010061A90 -#define A_GPIO_GLITCH 0x0010061A98 -#define A_GPIO_READ 0x0010061AA0 -#define A_GPIO_DIRECTION 0x0010061AA8 -#define A_GPIO_PIN_CLR 0x0010061AB0 -#define A_GPIO_PIN_SET 0x0010061AB8 +#define A_GPIO_CLR_EDGE 0x0010061A80 +#define A_GPIO_INT_TYPE 0x0010061A88 +#define A_GPIO_INPUT_INVERT 0x0010061A90 +#define A_GPIO_GLITCH 0x0010061A98 +#define A_GPIO_READ 0x0010061AA0 +#define A_GPIO_DIRECTION 0x0010061AA8 +#define A_GPIO_PIN_CLR 0x0010061AB0 +#define A_GPIO_PIN_SET 0x0010061AB8 #define A_GPIO_BASE 0x0010061A80 -#define R_GPIO_CLR_EDGE 0x00 -#define R_GPIO_INT_TYPE 0x08 -#define R_GPIO_INPUT_INVERT 0x10 -#define R_GPIO_GLITCH 0x18 -#define R_GPIO_READ 0x20 -#define R_GPIO_DIRECTION 0x28 -#define R_GPIO_PIN_CLR 0x30 -#define R_GPIO_PIN_SET 0x38 +#define R_GPIO_CLR_EDGE 0x00 +#define R_GPIO_INT_TYPE 0x08 +#define R_GPIO_INPUT_INVERT 0x10 +#define R_GPIO_GLITCH 0x18 +#define R_GPIO_READ 0x20 +#define R_GPIO_DIRECTION 0x28 +#define R_GPIO_PIN_CLR 0x30 +#define R_GPIO_PIN_SET 0x38 /* ********************************************************************* * SMBus Registers ********************************************************************* */ -#define A_SMB_XTRA_0 0x0010060000 -#define A_SMB_XTRA_1 0x0010060008 -#define A_SMB_FREQ_0 0x0010060010 -#define A_SMB_FREQ_1 0x0010060018 -#define A_SMB_STATUS_0 0x0010060020 -#define A_SMB_STATUS_1 0x0010060028 -#define A_SMB_CMD_0 0x0010060030 -#define A_SMB_CMD_1 0x0010060038 -#define A_SMB_START_0 0x0010060040 -#define A_SMB_START_1 0x0010060048 -#define A_SMB_DATA_0 0x0010060050 -#define A_SMB_DATA_1 0x0010060058 -#define A_SMB_CONTROL_0 0x0010060060 -#define A_SMB_CONTROL_1 0x0010060068 -#define A_SMB_PEC_0 0x0010060070 -#define A_SMB_PEC_1 0x0010060078 - -#define A_SMB_0 0x0010060000 -#define A_SMB_1 0x0010060008 -#define SMB_REGISTER_SPACING 0x8 -#define A_SMB_BASE(idx) (A_SMB_0+(idx)*SMB_REGISTER_SPACING) +#define A_SMB_XTRA_0 0x0010060000 +#define A_SMB_XTRA_1 0x0010060008 +#define A_SMB_FREQ_0 0x0010060010 +#define A_SMB_FREQ_1 0x0010060018 +#define A_SMB_STATUS_0 0x0010060020 +#define A_SMB_STATUS_1 0x0010060028 +#define A_SMB_CMD_0 0x0010060030 +#define A_SMB_CMD_1 0x0010060038 +#define A_SMB_START_0 0x0010060040 +#define A_SMB_START_1 0x0010060048 +#define A_SMB_DATA_0 0x0010060050 +#define A_SMB_DATA_1 0x0010060058 +#define A_SMB_CONTROL_0 0x0010060060 +#define A_SMB_CONTROL_1 0x0010060068 +#define A_SMB_PEC_0 0x0010060070 +#define A_SMB_PEC_1 0x0010060078 + +#define A_SMB_0 0x0010060000 +#define A_SMB_1 0x0010060008 +#define SMB_REGISTER_SPACING 0x8 +#define A_SMB_BASE(idx) (A_SMB_0+(idx)*SMB_REGISTER_SPACING) #define A_SMB_REGISTER(idx, reg) (A_SMB_BASE(idx)+(reg)) -#define R_SMB_XTRA 0x0000000000 -#define R_SMB_FREQ 0x0000000010 -#define R_SMB_STATUS 0x0000000020 -#define R_SMB_CMD 0x0000000030 -#define R_SMB_START 0x0000000040 -#define R_SMB_DATA 0x0000000050 -#define R_SMB_CONTROL 0x0000000060 -#define R_SMB_PEC 0x0000000070 +#define R_SMB_XTRA 0x0000000000 +#define R_SMB_FREQ 0x0000000010 +#define R_SMB_STATUS 0x0000000020 +#define R_SMB_CMD 0x0000000030 +#define R_SMB_START 0x0000000040 +#define R_SMB_DATA 0x0000000050 +#define R_SMB_CONTROL 0x0000000060 +#define R_SMB_PEC 0x0000000070 /* ********************************************************************* * Timer Registers @@ -607,55 +607,55 @@ */ #define A_SCD_WDOG_0 0x0010020050 -#define A_SCD_WDOG_1 0x0010020150 -#define SCD_WDOG_SPACING 0x100 +#define A_SCD_WDOG_1 0x0010020150 +#define SCD_WDOG_SPACING 0x100 #define SCD_NUM_WDOGS 2 -#define A_SCD_WDOG_BASE(w) (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w)) +#define A_SCD_WDOG_BASE(w) (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w)) #define A_SCD_WDOG_REGISTER(w, r) (A_SCD_WDOG_BASE(w) + (r)) #define R_SCD_WDOG_INIT 0x0000000000 #define R_SCD_WDOG_CNT 0x0000000008 #define R_SCD_WDOG_CFG 0x0000000010 -#define A_SCD_WDOG_INIT_0 0x0010020050 -#define A_SCD_WDOG_CNT_0 0x0010020058 -#define A_SCD_WDOG_CFG_0 0x0010020060 +#define A_SCD_WDOG_INIT_0 0x0010020050 +#define A_SCD_WDOG_CNT_0 0x0010020058 +#define A_SCD_WDOG_CFG_0 0x0010020060 -#define A_SCD_WDOG_INIT_1 0x0010020150 -#define A_SCD_WDOG_CNT_1 0x0010020158 -#define A_SCD_WDOG_CFG_1 0x0010020160 +#define A_SCD_WDOG_INIT_1 0x0010020150 +#define A_SCD_WDOG_CNT_1 0x0010020158 +#define A_SCD_WDOG_CFG_1 0x0010020160 /* * Generic timers */ #define A_SCD_TIMER_0 0x0010020070 -#define A_SCD_TIMER_1 0x0010020078 +#define A_SCD_TIMER_1 0x0010020078 #define A_SCD_TIMER_2 0x0010020170 -#define A_SCD_TIMER_3 0x0010020178 +#define A_SCD_TIMER_3 0x0010020178 #define SCD_NUM_TIMERS 4 -#define A_SCD_TIMER_BASE(w) (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1)) +#define A_SCD_TIMER_BASE(w) (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1)) #define A_SCD_TIMER_REGISTER(w, r) (A_SCD_TIMER_BASE(w) + (r)) #define R_SCD_TIMER_INIT 0x0000000000 #define R_SCD_TIMER_CNT 0x0000000010 #define R_SCD_TIMER_CFG 0x0000000020 -#define A_SCD_TIMER_INIT_0 0x0010020070 -#define A_SCD_TIMER_CNT_0 0x0010020080 -#define A_SCD_TIMER_CFG_0 0x0010020090 +#define A_SCD_TIMER_INIT_0 0x0010020070 +#define A_SCD_TIMER_CNT_0 0x0010020080 +#define A_SCD_TIMER_CFG_0 0x0010020090 -#define A_SCD_TIMER_INIT_1 0x0010020078 -#define A_SCD_TIMER_CNT_1 0x0010020088 -#define A_SCD_TIMER_CFG_1 0x0010020098 +#define A_SCD_TIMER_INIT_1 0x0010020078 +#define A_SCD_TIMER_CNT_1 0x0010020088 +#define A_SCD_TIMER_CFG_1 0x0010020098 -#define A_SCD_TIMER_INIT_2 0x0010020170 -#define A_SCD_TIMER_CNT_2 0x0010020180 -#define A_SCD_TIMER_CFG_2 0x0010020190 +#define A_SCD_TIMER_INIT_2 0x0010020170 +#define A_SCD_TIMER_CNT_2 0x0010020180 +#define A_SCD_TIMER_CFG_2 0x0010020190 -#define A_SCD_TIMER_INIT_3 0x0010020178 -#define A_SCD_TIMER_CNT_3 0x0010020188 -#define A_SCD_TIMER_CFG_3 0x0010020198 +#define A_SCD_TIMER_INIT_3 0x0010020178 +#define A_SCD_TIMER_CNT_3 0x0010020188 +#define A_SCD_TIMER_CFG_3 0x0010020198 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define A_SCD_SCRATCH 0x0010020C10 @@ -671,28 +671,28 @@ * System Control Registers ********************************************************************* */ -#define A_SCD_SYSTEM_REVISION 0x0010020000 -#define A_SCD_SYSTEM_CFG 0x0010020008 -#define A_SCD_SYSTEM_MANUF 0x0010038000 +#define A_SCD_SYSTEM_REVISION 0x0010020000 +#define A_SCD_SYSTEM_CFG 0x0010020008 +#define A_SCD_SYSTEM_MANUF 0x0010038000 /* ********************************************************************* * System Address Trap Registers ********************************************************************* */ -#define A_ADDR_TRAP_INDEX 0x00100200B0 -#define A_ADDR_TRAP_REG 0x00100200B8 -#define A_ADDR_TRAP_UP_0 0x0010020400 -#define A_ADDR_TRAP_UP_1 0x0010020408 -#define A_ADDR_TRAP_UP_2 0x0010020410 -#define A_ADDR_TRAP_UP_3 0x0010020418 -#define A_ADDR_TRAP_DOWN_0 0x0010020420 -#define A_ADDR_TRAP_DOWN_1 0x0010020428 -#define A_ADDR_TRAP_DOWN_2 0x0010020430 -#define A_ADDR_TRAP_DOWN_3 0x0010020438 -#define A_ADDR_TRAP_CFG_0 0x0010020440 -#define A_ADDR_TRAP_CFG_1 0x0010020448 -#define A_ADDR_TRAP_CFG_2 0x0010020450 -#define A_ADDR_TRAP_CFG_3 0x0010020458 +#define A_ADDR_TRAP_INDEX 0x00100200B0 +#define A_ADDR_TRAP_REG 0x00100200B8 +#define A_ADDR_TRAP_UP_0 0x0010020400 +#define A_ADDR_TRAP_UP_1 0x0010020408 +#define A_ADDR_TRAP_UP_2 0x0010020410 +#define A_ADDR_TRAP_UP_3 0x0010020418 +#define A_ADDR_TRAP_DOWN_0 0x0010020420 +#define A_ADDR_TRAP_DOWN_1 0x0010020428 +#define A_ADDR_TRAP_DOWN_2 0x0010020430 +#define A_ADDR_TRAP_DOWN_3 0x0010020438 +#define A_ADDR_TRAP_CFG_0 0x0010020440 +#define A_ADDR_TRAP_CFG_1 0x0010020448 +#define A_ADDR_TRAP_CFG_2 0x0010020450 +#define A_ADDR_TRAP_CFG_3 0x0010020458 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define A_ADDR_TRAP_REG_DEBUG 0x0010020460 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ @@ -708,31 +708,31 @@ * System Interrupt Mapper Registers ********************************************************************* */ -#define A_IMR_CPU0_BASE 0x0010020000 -#define A_IMR_CPU1_BASE 0x0010022000 -#define IMR_REGISTER_SPACING 0x2000 -#define IMR_REGISTER_SPACING_SHIFT 13 +#define A_IMR_CPU0_BASE 0x0010020000 +#define A_IMR_CPU1_BASE 0x0010022000 +#define IMR_REGISTER_SPACING 0x2000 +#define IMR_REGISTER_SPACING_SHIFT 13 #define A_IMR_MAPPER(cpu) (A_IMR_CPU0_BASE+(cpu)*IMR_REGISTER_SPACING) #define A_IMR_REGISTER(cpu, reg) (A_IMR_MAPPER(cpu)+(reg)) -#define R_IMR_INTERRUPT_DIAG 0x0010 -#define R_IMR_INTERRUPT_LDT 0x0018 -#define R_IMR_INTERRUPT_MASK 0x0028 -#define R_IMR_INTERRUPT_TRACE 0x0038 -#define R_IMR_INTERRUPT_SOURCE_STATUS 0x0040 -#define R_IMR_LDT_INTERRUPT_SET 0x0048 -#define R_IMR_LDT_INTERRUPT 0x0018 -#define R_IMR_LDT_INTERRUPT_CLR 0x0020 -#define R_IMR_MAILBOX_CPU 0x00c0 -#define R_IMR_ALIAS_MAILBOX_CPU 0x1000 -#define R_IMR_MAILBOX_SET_CPU 0x00C8 -#define R_IMR_ALIAS_MAILBOX_SET_CPU 0x1008 -#define R_IMR_MAILBOX_CLR_CPU 0x00D0 -#define R_IMR_INTERRUPT_STATUS_BASE 0x0100 -#define R_IMR_INTERRUPT_STATUS_COUNT 7 -#define R_IMR_INTERRUPT_MAP_BASE 0x0200 -#define R_IMR_INTERRUPT_MAP_COUNT 64 +#define R_IMR_INTERRUPT_DIAG 0x0010 +#define R_IMR_INTERRUPT_LDT 0x0018 +#define R_IMR_INTERRUPT_MASK 0x0028 +#define R_IMR_INTERRUPT_TRACE 0x0038 +#define R_IMR_INTERRUPT_SOURCE_STATUS 0x0040 +#define R_IMR_LDT_INTERRUPT_SET 0x0048 +#define R_IMR_LDT_INTERRUPT 0x0018 +#define R_IMR_LDT_INTERRUPT_CLR 0x0020 +#define R_IMR_MAILBOX_CPU 0x00c0 +#define R_IMR_ALIAS_MAILBOX_CPU 0x1000 +#define R_IMR_MAILBOX_SET_CPU 0x00C8 +#define R_IMR_ALIAS_MAILBOX_SET_CPU 0x1008 +#define R_IMR_MAILBOX_CLR_CPU 0x00D0 +#define R_IMR_INTERRUPT_STATUS_BASE 0x0100 +#define R_IMR_INTERRUPT_STATUS_COUNT 7 +#define R_IMR_INTERRUPT_MAP_BASE 0x0200 +#define R_IMR_INTERRUPT_MAP_COUNT 64 /* * these macros work together to build the address of a mailbox @@ -746,11 +746,11 @@ * System Performance Counter Registers ********************************************************************* */ -#define A_SCD_PERF_CNT_CFG 0x00100204C0 -#define A_SCD_PERF_CNT_0 0x00100204D0 -#define A_SCD_PERF_CNT_1 0x00100204D8 -#define A_SCD_PERF_CNT_2 0x00100204E0 -#define A_SCD_PERF_CNT_3 0x00100204E8 +#define A_SCD_PERF_CNT_CFG 0x00100204C0 +#define A_SCD_PERF_CNT_0 0x00100204D0 +#define A_SCD_PERF_CNT_1 0x00100204D8 +#define A_SCD_PERF_CNT_2 0x00100204E0 +#define A_SCD_PERF_CNT_3 0x00100204E8 #define SCD_NUM_PERF_CNT 4 #define SCD_PERF_CNT_SPACING 8 @@ -760,46 +760,46 @@ * System Bus Watcher Registers ********************************************************************* */ -#define A_SCD_BUS_ERR_STATUS 0x0010020880 +#define A_SCD_BUS_ERR_STATUS 0x0010020880 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define A_SCD_BUS_ERR_STATUS_DEBUG 0x00100208D0 -#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0 +#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0 #endif /* 1250 PASS2 || 112x PASS1 */ -#define A_BUS_ERR_DATA_0 0x00100208A0 -#define A_BUS_ERR_DATA_1 0x00100208A8 -#define A_BUS_ERR_DATA_2 0x00100208B0 -#define A_BUS_ERR_DATA_3 0x00100208B8 -#define A_BUS_L2_ERRORS 0x00100208C0 -#define A_BUS_MEM_IO_ERRORS 0x00100208C8 +#define A_BUS_ERR_DATA_0 0x00100208A0 +#define A_BUS_ERR_DATA_1 0x00100208A8 +#define A_BUS_ERR_DATA_2 0x00100208B0 +#define A_BUS_ERR_DATA_3 0x00100208B8 +#define A_BUS_L2_ERRORS 0x00100208C0 +#define A_BUS_MEM_IO_ERRORS 0x00100208C8 /* ********************************************************************* * System Debug Controller Registers ********************************************************************* */ -#define A_SCD_JTAG_BASE 0x0010000000 +#define A_SCD_JTAG_BASE 0x0010000000 /* ********************************************************************* * System Trace Buffer Registers ********************************************************************* */ -#define A_SCD_TRACE_CFG 0x0010020A00 -#define A_SCD_TRACE_READ 0x0010020A08 -#define A_SCD_TRACE_EVENT_0 0x0010020A20 -#define A_SCD_TRACE_EVENT_1 0x0010020A28 -#define A_SCD_TRACE_EVENT_2 0x0010020A30 -#define A_SCD_TRACE_EVENT_3 0x0010020A38 -#define A_SCD_TRACE_SEQUENCE_0 0x0010020A40 -#define A_SCD_TRACE_SEQUENCE_1 0x0010020A48 -#define A_SCD_TRACE_SEQUENCE_2 0x0010020A50 -#define A_SCD_TRACE_SEQUENCE_3 0x0010020A58 -#define A_SCD_TRACE_EVENT_4 0x0010020A60 -#define A_SCD_TRACE_EVENT_5 0x0010020A68 -#define A_SCD_TRACE_EVENT_6 0x0010020A70 -#define A_SCD_TRACE_EVENT_7 0x0010020A78 -#define A_SCD_TRACE_SEQUENCE_4 0x0010020A80 -#define A_SCD_TRACE_SEQUENCE_5 0x0010020A88 -#define A_SCD_TRACE_SEQUENCE_6 0x0010020A90 -#define A_SCD_TRACE_SEQUENCE_7 0x0010020A98 +#define A_SCD_TRACE_CFG 0x0010020A00 +#define A_SCD_TRACE_READ 0x0010020A08 +#define A_SCD_TRACE_EVENT_0 0x0010020A20 +#define A_SCD_TRACE_EVENT_1 0x0010020A28 +#define A_SCD_TRACE_EVENT_2 0x0010020A30 +#define A_SCD_TRACE_EVENT_3 0x0010020A38 +#define A_SCD_TRACE_SEQUENCE_0 0x0010020A40 +#define A_SCD_TRACE_SEQUENCE_1 0x0010020A48 +#define A_SCD_TRACE_SEQUENCE_2 0x0010020A50 +#define A_SCD_TRACE_SEQUENCE_3 0x0010020A58 +#define A_SCD_TRACE_EVENT_4 0x0010020A60 +#define A_SCD_TRACE_EVENT_5 0x0010020A68 +#define A_SCD_TRACE_EVENT_6 0x0010020A70 +#define A_SCD_TRACE_EVENT_7 0x0010020A78 +#define A_SCD_TRACE_SEQUENCE_4 0x0010020A80 +#define A_SCD_TRACE_SEQUENCE_5 0x0010020A88 +#define A_SCD_TRACE_SEQUENCE_6 0x0010020A90 +#define A_SCD_TRACE_SEQUENCE_7 0x0010020A98 #define TRACE_REGISTER_SPACING 8 #define TRACE_NUM_REGISTERS 8 @@ -814,8 +814,8 @@ * System Generic DMA Registers ********************************************************************* */ -#define A_DM_0 0x0010020B00 -#define A_DM_1 0x0010020B20 +#define A_DM_0 0x0010020B00 +#define A_DM_1 0x0010020B20 #define A_DM_2 0x0010020B40 #define A_DM_3 0x0010020B60 #define DM_REGISTER_SPACING 0x20 @@ -854,39 +854,39 @@ ********************************************************************* */ #if SIBYTE_HDR_FEATURE_1250_112x -#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) -#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) -#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) -#define A_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) +#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000) +#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024)) +#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000) +#define A_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000) #define A_PHYS_GENBUS _SB_MAKE64(0x0010090000) #define A_PHYS_GENBUS_END _SB_MAKE64(0x0040000000) #define A_PHYS_LDTPCI_IO_MATCH_BYTES_32 _SB_MAKE64(0x0040000000) -#define A_PHYS_LDTPCI_IO_MATCH_BITS_32 _SB_MAKE64(0x0060000000) -#define A_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) -#define A_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) -#define A_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) -#define A_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) -#define A_PHYS_LDT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) -#define A_PHYS_LDTPCI_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) -#define A_PHYS_LDTPCI_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) -#define A_PHYS_LDT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) -#define A_PHYS_LDTPCI_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) -#define A_PHYS_LDTPCI_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) -#define A_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) -#define A_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024)) -#define A_PHYS_LDT_EXP _SB_MAKE64(0x8000000000) -#define A_PHYS_PCI_FULLACCESS_BYTES _SB_MAKE64(0xF000000000) -#define A_PHYS_PCI_FULLACCESS_BITS _SB_MAKE64(0xF100000000) -#define A_PHYS_RESERVED _SB_MAKE64(0xF200000000) -#define A_PHYS_RESERVED_SPECIAL_LDT _SB_MAKE64(0xFD00000000) - -#define A_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) -#define PHYS_L2CACHE_NUM_WAYS 4 -#define A_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000080000) -#define A_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0180000) -#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000) -#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000) -#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000) +#define A_PHYS_LDTPCI_IO_MATCH_BITS_32 _SB_MAKE64(0x0060000000) +#define A_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000) +#define A_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000) +#define A_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000) +#define A_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000) +#define A_PHYS_LDT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000) +#define A_PHYS_LDTPCI_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000) +#define A_PHYS_LDTPCI_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000) +#define A_PHYS_LDT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000) +#define A_PHYS_LDTPCI_IO_MATCH_BITS _SB_MAKE64(0x00FC000000) +#define A_PHYS_LDTPCI_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000) +#define A_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000) +#define A_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024)) +#define A_PHYS_LDT_EXP _SB_MAKE64(0x8000000000) +#define A_PHYS_PCI_FULLACCESS_BYTES _SB_MAKE64(0xF000000000) +#define A_PHYS_PCI_FULLACCESS_BITS _SB_MAKE64(0xF100000000) +#define A_PHYS_RESERVED _SB_MAKE64(0xF200000000) +#define A_PHYS_RESERVED_SPECIAL_LDT _SB_MAKE64(0xFD00000000) + +#define A_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000) +#define PHYS_L2CACHE_NUM_WAYS 4 +#define A_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000080000) +#define A_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0180000) +#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000) +#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000) +#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000) #endif diff --git a/arch/mips/include/asm/sibyte/sb1250_scd.h b/arch/mips/include/asm/sibyte/sb1250_scd.h index 615e165..d725f2f 100644 --- a/arch/mips/include/asm/sibyte/sb1250_scd.h +++ b/arch/mips/include/asm/sibyte/sb1250_scd.h @@ -44,10 +44,10 @@ #define M_SYS_RESERVED _SB_MAKEMASK(8, 0) -#define S_SYS_REVISION _SB_MAKE64(8) -#define M_SYS_REVISION _SB_MAKEMASK(8, S_SYS_REVISION) -#define V_SYS_REVISION(x) _SB_MAKEVALUE(x, S_SYS_REVISION) -#define G_SYS_REVISION(x) _SB_GETVALUE(x, S_SYS_REVISION, M_SYS_REVISION) +#define S_SYS_REVISION _SB_MAKE64(8) +#define M_SYS_REVISION _SB_MAKEMASK(8, S_SYS_REVISION) +#define V_SYS_REVISION(x) _SB_MAKEVALUE(x, S_SYS_REVISION) +#define G_SYS_REVISION(x) _SB_GETVALUE(x, S_SYS_REVISION, M_SYS_REVISION) #define K_SYS_REVISION_BCM1250_PASS1 0x01 @@ -93,10 +93,10 @@ #define K_SYS_REVISION_BCM1480_B0 0x11 /*Cache size - 23:20 of revision register*/ -#define S_SYS_L2C_SIZE _SB_MAKE64(20) -#define M_SYS_L2C_SIZE _SB_MAKEMASK(4, S_SYS_L2C_SIZE) -#define V_SYS_L2C_SIZE(x) _SB_MAKEVALUE(x, S_SYS_L2C_SIZE) -#define G_SYS_L2C_SIZE(x) _SB_GETVALUE(x, S_SYS_L2C_SIZE, M_SYS_L2C_SIZE) +#define S_SYS_L2C_SIZE _SB_MAKE64(20) +#define M_SYS_L2C_SIZE _SB_MAKEMASK(4, S_SYS_L2C_SIZE) +#define V_SYS_L2C_SIZE(x) _SB_MAKEVALUE(x, S_SYS_L2C_SIZE) +#define G_SYS_L2C_SIZE(x) _SB_GETVALUE(x, S_SYS_L2C_SIZE, M_SYS_L2C_SIZE) #define K_SYS_L2C_SIZE_1MB 0 #define K_SYS_L2C_SIZE_512KB 5 @@ -109,40 +109,40 @@ /* Number of CPU cores, bits 27:24 of revision register*/ -#define S_SYS_NUM_CPUS _SB_MAKE64(24) -#define M_SYS_NUM_CPUS _SB_MAKEMASK(4, S_SYS_NUM_CPUS) -#define V_SYS_NUM_CPUS(x) _SB_MAKEVALUE(x, S_SYS_NUM_CPUS) -#define G_SYS_NUM_CPUS(x) _SB_GETVALUE(x, S_SYS_NUM_CPUS, M_SYS_NUM_CPUS) +#define S_SYS_NUM_CPUS _SB_MAKE64(24) +#define M_SYS_NUM_CPUS _SB_MAKEMASK(4, S_SYS_NUM_CPUS) +#define V_SYS_NUM_CPUS(x) _SB_MAKEVALUE(x, S_SYS_NUM_CPUS) +#define G_SYS_NUM_CPUS(x) _SB_GETVALUE(x, S_SYS_NUM_CPUS, M_SYS_NUM_CPUS) /* XXX: discourage people from using these constants. */ -#define S_SYS_PART _SB_MAKE64(16) -#define M_SYS_PART _SB_MAKEMASK(16, S_SYS_PART) -#define V_SYS_PART(x) _SB_MAKEVALUE(x, S_SYS_PART) -#define G_SYS_PART(x) _SB_GETVALUE(x, S_SYS_PART, M_SYS_PART) +#define S_SYS_PART _SB_MAKE64(16) +#define M_SYS_PART _SB_MAKEMASK(16, S_SYS_PART) +#define V_SYS_PART(x) _SB_MAKEVALUE(x, S_SYS_PART) +#define G_SYS_PART(x) _SB_GETVALUE(x, S_SYS_PART, M_SYS_PART) /* XXX: discourage people from using these constants. */ -#define K_SYS_PART_SB1250 0x1250 -#define K_SYS_PART_BCM1120 0x1121 -#define K_SYS_PART_BCM1125 0x1123 -#define K_SYS_PART_BCM1125H 0x1124 -#define K_SYS_PART_BCM1122 0x1113 +#define K_SYS_PART_SB1250 0x1250 +#define K_SYS_PART_BCM1120 0x1121 +#define K_SYS_PART_BCM1125 0x1123 +#define K_SYS_PART_BCM1125H 0x1124 +#define K_SYS_PART_BCM1122 0x1113 /* The "peripheral set" (SOC type) is the low 4 bits of the "part" field. */ -#define S_SYS_SOC_TYPE _SB_MAKE64(16) -#define M_SYS_SOC_TYPE _SB_MAKEMASK(4, S_SYS_SOC_TYPE) -#define V_SYS_SOC_TYPE(x) _SB_MAKEVALUE(x, S_SYS_SOC_TYPE) -#define G_SYS_SOC_TYPE(x) _SB_GETVALUE(x, S_SYS_SOC_TYPE, M_SYS_SOC_TYPE) - -#define K_SYS_SOC_TYPE_BCM1250 0x0 -#define K_SYS_SOC_TYPE_BCM1120 0x1 -#define K_SYS_SOC_TYPE_BCM1250_ALT 0x2 /* 1250pass2 w/ 1/4 L2. */ -#define K_SYS_SOC_TYPE_BCM1125 0x3 -#define K_SYS_SOC_TYPE_BCM1125H 0x4 -#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5 /* 1250pass2 w/ 1/2 L2. */ -#define K_SYS_SOC_TYPE_BCM1x80 0x6 -#define K_SYS_SOC_TYPE_BCM1x55 0x7 +#define S_SYS_SOC_TYPE _SB_MAKE64(16) +#define M_SYS_SOC_TYPE _SB_MAKEMASK(4, S_SYS_SOC_TYPE) +#define V_SYS_SOC_TYPE(x) _SB_MAKEVALUE(x, S_SYS_SOC_TYPE) +#define G_SYS_SOC_TYPE(x) _SB_GETVALUE(x, S_SYS_SOC_TYPE, M_SYS_SOC_TYPE) + +#define K_SYS_SOC_TYPE_BCM1250 0x0 +#define K_SYS_SOC_TYPE_BCM1120 0x1 +#define K_SYS_SOC_TYPE_BCM1250_ALT 0x2 /* 1250pass2 w/ 1/4 L2. */ +#define K_SYS_SOC_TYPE_BCM1125 0x3 +#define K_SYS_SOC_TYPE_BCM1125H 0x4 +#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5 /* 1250pass2 w/ 1/2 L2. */ +#define K_SYS_SOC_TYPE_BCM1x80 0x6 +#define K_SYS_SOC_TYPE_BCM1x55 0x7 /* * Calculate correct SOC type given a copy of system revision register. @@ -169,10 +169,10 @@ ? K_SYS_SOC_TYPE_BCM1250 : G_SYS_SOC_TYPE(sysrev)) #endif -#define S_SYS_WID _SB_MAKE64(32) -#define M_SYS_WID _SB_MAKEMASK(32, S_SYS_WID) -#define V_SYS_WID(x) _SB_MAKEVALUE(x, S_SYS_WID) -#define G_SYS_WID(x) _SB_GETVALUE(x, S_SYS_WID, M_SYS_WID) +#define S_SYS_WID _SB_MAKE64(32) +#define M_SYS_WID _SB_MAKEMASK(32, S_SYS_WID) +#define V_SYS_WID(x) _SB_MAKEVALUE(x, S_SYS_WID) +#define G_SYS_WID(x) _SB_GETVALUE(x, S_SYS_WID, M_SYS_WID) /* * System Manufacturing Register @@ -181,37 +181,37 @@ #if SIBYTE_HDR_FEATURE_1250_112x /* Wafer ID: bits 31:0 */ -#define S_SYS_WAFERID1_200 _SB_MAKE64(0) -#define M_SYS_WAFERID1_200 _SB_MAKEMASK(32, S_SYS_WAFERID1_200) -#define V_SYS_WAFERID1_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID1_200) -#define G_SYS_WAFERID1_200(x) _SB_GETVALUE(x, S_SYS_WAFERID1_200, M_SYS_WAFERID1_200) +#define S_SYS_WAFERID1_200 _SB_MAKE64(0) +#define M_SYS_WAFERID1_200 _SB_MAKEMASK(32, S_SYS_WAFERID1_200) +#define V_SYS_WAFERID1_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID1_200) +#define G_SYS_WAFERID1_200(x) _SB_GETVALUE(x, S_SYS_WAFERID1_200, M_SYS_WAFERID1_200) -#define S_SYS_BIN _SB_MAKE64(32) -#define M_SYS_BIN _SB_MAKEMASK(4, S_SYS_BIN) -#define V_SYS_BIN(x) _SB_MAKEVALUE(x, S_SYS_BIN) -#define G_SYS_BIN(x) _SB_GETVALUE(x, S_SYS_BIN, M_SYS_BIN) +#define S_SYS_BIN _SB_MAKE64(32) +#define M_SYS_BIN _SB_MAKEMASK(4, S_SYS_BIN) +#define V_SYS_BIN(x) _SB_MAKEVALUE(x, S_SYS_BIN) +#define G_SYS_BIN(x) _SB_GETVALUE(x, S_SYS_BIN, M_SYS_BIN) /* Wafer ID: bits 39:36 */ -#define S_SYS_WAFERID2_200 _SB_MAKE64(36) -#define M_SYS_WAFERID2_200 _SB_MAKEMASK(4, S_SYS_WAFERID2_200) -#define V_SYS_WAFERID2_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID2_200) -#define G_SYS_WAFERID2_200(x) _SB_GETVALUE(x, S_SYS_WAFERID2_200, M_SYS_WAFERID2_200) +#define S_SYS_WAFERID2_200 _SB_MAKE64(36) +#define M_SYS_WAFERID2_200 _SB_MAKEMASK(4, S_SYS_WAFERID2_200) +#define V_SYS_WAFERID2_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID2_200) +#define G_SYS_WAFERID2_200(x) _SB_GETVALUE(x, S_SYS_WAFERID2_200, M_SYS_WAFERID2_200) /* Wafer ID: bits 39:0 */ -#define S_SYS_WAFERID_300 _SB_MAKE64(0) -#define M_SYS_WAFERID_300 _SB_MAKEMASK(40, S_SYS_WAFERID_300) -#define V_SYS_WAFERID_300(x) _SB_MAKEVALUE(x, S_SYS_WAFERID_300) -#define G_SYS_WAFERID_300(x) _SB_GETVALUE(x, S_SYS_WAFERID_300, M_SYS_WAFERID_300) - -#define S_SYS_XPOS _SB_MAKE64(40) -#define M_SYS_XPOS _SB_MAKEMASK(6, S_SYS_XPOS) -#define V_SYS_XPOS(x) _SB_MAKEVALUE(x, S_SYS_XPOS) -#define G_SYS_XPOS(x) _SB_GETVALUE(x, S_SYS_XPOS, M_SYS_XPOS) - -#define S_SYS_YPOS _SB_MAKE64(46) -#define M_SYS_YPOS _SB_MAKEMASK(6, S_SYS_YPOS) -#define V_SYS_YPOS(x) _SB_MAKEVALUE(x, S_SYS_YPOS) -#define G_SYS_YPOS(x) _SB_GETVALUE(x, S_SYS_YPOS, M_SYS_YPOS) +#define S_SYS_WAFERID_300 _SB_MAKE64(0) +#define M_SYS_WAFERID_300 _SB_MAKEMASK(40, S_SYS_WAFERID_300) +#define V_SYS_WAFERID_300(x) _SB_MAKEVALUE(x, S_SYS_WAFERID_300) +#define G_SYS_WAFERID_300(x) _SB_GETVALUE(x, S_SYS_WAFERID_300, M_SYS_WAFERID_300) + +#define S_SYS_XPOS _SB_MAKE64(40) +#define M_SYS_XPOS _SB_MAKEMASK(6, S_SYS_XPOS) +#define V_SYS_XPOS(x) _SB_MAKEVALUE(x, S_SYS_XPOS) +#define G_SYS_XPOS(x) _SB_GETVALUE(x, S_SYS_XPOS, M_SYS_XPOS) + +#define S_SYS_YPOS _SB_MAKE64(46) +#define M_SYS_YPOS _SB_MAKEMASK(6, S_SYS_YPOS) +#define V_SYS_YPOS(x) _SB_MAKEVALUE(x, S_SYS_YPOS) +#define G_SYS_YPOS(x) _SB_GETVALUE(x, S_SYS_YPOS, M_SYS_YPOS) #endif @@ -221,55 +221,55 @@ */ #if SIBYTE_HDR_FEATURE_1250_112x -#define M_SYS_LDT_PLL_BYP _SB_MAKEMASK1(3) +#define M_SYS_LDT_PLL_BYP _SB_MAKEMASK1(3) #define M_SYS_PCI_SYNC_TEST_MODE _SB_MAKEMASK1(4) -#define M_SYS_IOB0_DIV _SB_MAKEMASK1(5) -#define M_SYS_IOB1_DIV _SB_MAKEMASK1(6) - -#define S_SYS_PLL_DIV _SB_MAKE64(7) -#define M_SYS_PLL_DIV _SB_MAKEMASK(5, S_SYS_PLL_DIV) -#define V_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_SYS_PLL_DIV) -#define G_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_SYS_PLL_DIV, M_SYS_PLL_DIV) - -#define M_SYS_SER0_ENABLE _SB_MAKEMASK1(12) -#define M_SYS_SER0_RSTB_EN _SB_MAKEMASK1(13) -#define M_SYS_SER1_ENABLE _SB_MAKEMASK1(14) -#define M_SYS_SER1_RSTB_EN _SB_MAKEMASK1(15) -#define M_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) - -#define S_SYS_BOOT_MODE _SB_MAKE64(17) -#define M_SYS_BOOT_MODE _SB_MAKEMASK(2, S_SYS_BOOT_MODE) -#define V_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_SYS_BOOT_MODE) -#define G_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_SYS_BOOT_MODE, M_SYS_BOOT_MODE) -#define K_SYS_BOOT_MODE_ROM32 0 -#define K_SYS_BOOT_MODE_ROM8 1 +#define M_SYS_IOB0_DIV _SB_MAKEMASK1(5) +#define M_SYS_IOB1_DIV _SB_MAKEMASK1(6) + +#define S_SYS_PLL_DIV _SB_MAKE64(7) +#define M_SYS_PLL_DIV _SB_MAKEMASK(5, S_SYS_PLL_DIV) +#define V_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_SYS_PLL_DIV) +#define G_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_SYS_PLL_DIV, M_SYS_PLL_DIV) + +#define M_SYS_SER0_ENABLE _SB_MAKEMASK1(12) +#define M_SYS_SER0_RSTB_EN _SB_MAKEMASK1(13) +#define M_SYS_SER1_ENABLE _SB_MAKEMASK1(14) +#define M_SYS_SER1_RSTB_EN _SB_MAKEMASK1(15) +#define M_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16) + +#define S_SYS_BOOT_MODE _SB_MAKE64(17) +#define M_SYS_BOOT_MODE _SB_MAKEMASK(2, S_SYS_BOOT_MODE) +#define V_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_SYS_BOOT_MODE) +#define G_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_SYS_BOOT_MODE, M_SYS_BOOT_MODE) +#define K_SYS_BOOT_MODE_ROM32 0 +#define K_SYS_BOOT_MODE_ROM8 1 #define K_SYS_BOOT_MODE_SMBUS_SMALL 2 #define K_SYS_BOOT_MODE_SMBUS_BIG 3 -#define M_SYS_PCI_HOST _SB_MAKEMASK1(19) -#define M_SYS_PCI_ARBITER _SB_MAKEMASK1(20) -#define M_SYS_SOUTH_ON_LDT _SB_MAKEMASK1(21) -#define M_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) -#define M_SYS_GENCLK_EN _SB_MAKEMASK1(23) -#define M_SYS_LDT_TEST_EN _SB_MAKEMASK1(24) -#define M_SYS_GEN_PARITY_EN _SB_MAKEMASK1(25) +#define M_SYS_PCI_HOST _SB_MAKEMASK1(19) +#define M_SYS_PCI_ARBITER _SB_MAKEMASK1(20) +#define M_SYS_SOUTH_ON_LDT _SB_MAKEMASK1(21) +#define M_SYS_BIG_ENDIAN _SB_MAKEMASK1(22) +#define M_SYS_GENCLK_EN _SB_MAKEMASK1(23) +#define M_SYS_LDT_TEST_EN _SB_MAKEMASK1(24) +#define M_SYS_GEN_PARITY_EN _SB_MAKEMASK1(25) -#define S_SYS_CONFIG 26 -#define M_SYS_CONFIG _SB_MAKEMASK(6, S_SYS_CONFIG) -#define V_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_SYS_CONFIG) -#define G_SYS_CONFIG(x) _SB_GETVALUE(x, S_SYS_CONFIG, M_SYS_CONFIG) +#define S_SYS_CONFIG 26 +#define M_SYS_CONFIG _SB_MAKEMASK(6, S_SYS_CONFIG) +#define V_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_SYS_CONFIG) +#define G_SYS_CONFIG(x) _SB_GETVALUE(x, S_SYS_CONFIG, M_SYS_CONFIG) /* The following bits are writeable by JTAG only. */ -#define M_SYS_CLKSTOP _SB_MAKEMASK1(32) -#define M_SYS_CLKSTEP _SB_MAKEMASK1(33) +#define M_SYS_CLKSTOP _SB_MAKEMASK1(32) +#define M_SYS_CLKSTEP _SB_MAKEMASK1(33) -#define S_SYS_CLKCOUNT 34 -#define M_SYS_CLKCOUNT _SB_MAKEMASK(8, S_SYS_CLKCOUNT) -#define V_SYS_CLKCOUNT(x) _SB_MAKEVALUE(x, S_SYS_CLKCOUNT) -#define G_SYS_CLKCOUNT(x) _SB_GETVALUE(x, S_SYS_CLKCOUNT, M_SYS_CLKCOUNT) +#define S_SYS_CLKCOUNT 34 +#define M_SYS_CLKCOUNT _SB_MAKEMASK(8, S_SYS_CLKCOUNT) +#define V_SYS_CLKCOUNT(x) _SB_MAKEVALUE(x, S_SYS_CLKCOUNT) +#define G_SYS_CLKCOUNT(x) _SB_GETVALUE(x, S_SYS_CLKCOUNT, M_SYS_CLKCOUNT) -#define M_SYS_PLL_BYPASS _SB_MAKEMASK1(42) +#define M_SYS_PLL_BYPASS _SB_MAKEMASK1(42) #define S_SYS_PLL_IREF 43 #define M_SYS_PLL_IREF _SB_MAKEMASK(2, S_SYS_PLL_IREF) @@ -280,26 +280,26 @@ #define S_SYS_PLL_VREG 47 #define M_SYS_PLL_VREG _SB_MAKEMASK(2, S_SYS_PLL_VREG) -#define M_SYS_MEM_RESET _SB_MAKEMASK1(49) -#define M_SYS_L2C_RESET _SB_MAKEMASK1(50) -#define M_SYS_IO_RESET_0 _SB_MAKEMASK1(51) -#define M_SYS_IO_RESET_1 _SB_MAKEMASK1(52) -#define M_SYS_SCD_RESET _SB_MAKEMASK1(53) +#define M_SYS_MEM_RESET _SB_MAKEMASK1(49) +#define M_SYS_L2C_RESET _SB_MAKEMASK1(50) +#define M_SYS_IO_RESET_0 _SB_MAKEMASK1(51) +#define M_SYS_IO_RESET_1 _SB_MAKEMASK1(52) +#define M_SYS_SCD_RESET _SB_MAKEMASK1(53) /* End of bits writable by JTAG only. */ -#define M_SYS_CPU_RESET_0 _SB_MAKEMASK1(54) -#define M_SYS_CPU_RESET_1 _SB_MAKEMASK1(55) +#define M_SYS_CPU_RESET_0 _SB_MAKEMASK1(54) +#define M_SYS_CPU_RESET_1 _SB_MAKEMASK1(55) -#define M_SYS_UNICPU0 _SB_MAKEMASK1(56) -#define M_SYS_UNICPU1 _SB_MAKEMASK1(57) +#define M_SYS_UNICPU0 _SB_MAKEMASK1(56) +#define M_SYS_UNICPU1 _SB_MAKEMASK1(57) -#define M_SYS_SB_SOFTRES _SB_MAKEMASK1(58) -#define M_SYS_EXT_RESET _SB_MAKEMASK1(59) -#define M_SYS_SYSTEM_RESET _SB_MAKEMASK1(60) +#define M_SYS_SB_SOFTRES _SB_MAKEMASK1(58) +#define M_SYS_EXT_RESET _SB_MAKEMASK1(59) +#define M_SYS_SYSTEM_RESET _SB_MAKEMASK1(60) -#define M_SYS_MISR_MODE _SB_MAKEMASK1(61) -#define M_SYS_MISR_RESET _SB_MAKEMASK1(62) +#define M_SYS_MISR_MODE _SB_MAKEMASK1(61) +#define M_SYS_MISR_RESET _SB_MAKEMASK1(62) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define M_SYS_SW_FLAG _SB_MAKEMASK1(63) @@ -313,46 +313,46 @@ * Registers: SCD_MBOX_CPU_x */ -#define S_MBOX_INT_3 0 -#define M_MBOX_INT_3 _SB_MAKEMASK(16, S_MBOX_INT_3) -#define S_MBOX_INT_2 16 -#define M_MBOX_INT_2 _SB_MAKEMASK(16, S_MBOX_INT_2) -#define S_MBOX_INT_1 32 -#define M_MBOX_INT_1 _SB_MAKEMASK(16, S_MBOX_INT_1) -#define S_MBOX_INT_0 48 -#define M_MBOX_INT_0 _SB_MAKEMASK(16, S_MBOX_INT_0) +#define S_MBOX_INT_3 0 +#define M_MBOX_INT_3 _SB_MAKEMASK(16, S_MBOX_INT_3) +#define S_MBOX_INT_2 16 +#define M_MBOX_INT_2 _SB_MAKEMASK(16, S_MBOX_INT_2) +#define S_MBOX_INT_1 32 +#define M_MBOX_INT_1 _SB_MAKEMASK(16, S_MBOX_INT_1) +#define S_MBOX_INT_0 48 +#define M_MBOX_INT_0 _SB_MAKEMASK(16, S_MBOX_INT_0) /* * Watchdog Registers (Table 4-8) (Table 4-9) (Table 4-10) * Registers: SCD_WDOG_INIT_CNT_x */ -#define V_SCD_WDOG_FREQ 1000000 +#define V_SCD_WDOG_FREQ 1000000 -#define S_SCD_WDOG_INIT 0 -#define M_SCD_WDOG_INIT _SB_MAKEMASK(23, S_SCD_WDOG_INIT) +#define S_SCD_WDOG_INIT 0 +#define M_SCD_WDOG_INIT _SB_MAKEMASK(23, S_SCD_WDOG_INIT) -#define S_SCD_WDOG_CNT 0 -#define M_SCD_WDOG_CNT _SB_MAKEMASK(23, S_SCD_WDOG_CNT) +#define S_SCD_WDOG_CNT 0 +#define M_SCD_WDOG_CNT _SB_MAKEMASK(23, S_SCD_WDOG_CNT) -#define S_SCD_WDOG_ENABLE 0 -#define M_SCD_WDOG_ENABLE _SB_MAKEMASK1(S_SCD_WDOG_ENABLE) +#define S_SCD_WDOG_ENABLE 0 +#define M_SCD_WDOG_ENABLE _SB_MAKEMASK1(S_SCD_WDOG_ENABLE) -#define S_SCD_WDOG_RESET_TYPE 2 -#define M_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(3, S_SCD_WDOG_RESET_TYPE) +#define S_SCD_WDOG_RESET_TYPE 2 +#define M_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(3, S_SCD_WDOG_RESET_TYPE) #define V_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_SCD_WDOG_RESET_TYPE) #define G_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_SCD_WDOG_RESET_TYPE, M_SCD_WDOG_RESET_TYPE) -#define K_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ -#define K_SCD_WDOG_RESET_SOFT 1 -#define K_SCD_WDOG_RESET_CPU0 3 -#define K_SCD_WDOG_RESET_CPU1 5 +#define K_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */ +#define K_SCD_WDOG_RESET_SOFT 1 +#define K_SCD_WDOG_RESET_CPU0 3 +#define K_SCD_WDOG_RESET_CPU1 5 #define K_SCD_WDOG_RESET_BOTH_CPUS 7 /* This feature is present in 1250 C0 and later, but *not* in 112x A revs. */ #if SIBYTE_HDR_FEATURE(1250, PASS3) -#define S_SCD_WDOG_HAS_RESET 8 -#define M_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET) +#define S_SCD_WDOG_HAS_RESET 8 +#define M_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET) #endif @@ -360,46 +360,46 @@ * Timer Registers (Table 4-11) (Table 4-12) (Table 4-13) */ -#define V_SCD_TIMER_FREQ 1000000 +#define V_SCD_TIMER_FREQ 1000000 -#define S_SCD_TIMER_INIT 0 -#define M_SCD_TIMER_INIT _SB_MAKEMASK(23, S_SCD_TIMER_INIT) -#define V_SCD_TIMER_INIT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_INIT) -#define G_SCD_TIMER_INIT(x) _SB_GETVALUE(x, S_SCD_TIMER_INIT, M_SCD_TIMER_INIT) +#define S_SCD_TIMER_INIT 0 +#define M_SCD_TIMER_INIT _SB_MAKEMASK(23, S_SCD_TIMER_INIT) +#define V_SCD_TIMER_INIT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_INIT) +#define G_SCD_TIMER_INIT(x) _SB_GETVALUE(x, S_SCD_TIMER_INIT, M_SCD_TIMER_INIT) #define V_SCD_TIMER_WIDTH 23 -#define S_SCD_TIMER_CNT 0 -#define M_SCD_TIMER_CNT _SB_MAKEMASK(V_SCD_TIMER_WIDTH, S_SCD_TIMER_CNT) -#define V_SCD_TIMER_CNT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_CNT) -#define G_SCD_TIMER_CNT(x) _SB_GETVALUE(x, S_SCD_TIMER_CNT, M_SCD_TIMER_CNT) +#define S_SCD_TIMER_CNT 0 +#define M_SCD_TIMER_CNT _SB_MAKEMASK(V_SCD_TIMER_WIDTH, S_SCD_TIMER_CNT) +#define V_SCD_TIMER_CNT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_CNT) +#define G_SCD_TIMER_CNT(x) _SB_GETVALUE(x, S_SCD_TIMER_CNT, M_SCD_TIMER_CNT) -#define M_SCD_TIMER_ENABLE _SB_MAKEMASK1(0) -#define M_SCD_TIMER_MODE _SB_MAKEMASK1(1) +#define M_SCD_TIMER_ENABLE _SB_MAKEMASK1(0) +#define M_SCD_TIMER_MODE _SB_MAKEMASK1(1) #define M_SCD_TIMER_MODE_CONTINUOUS M_SCD_TIMER_MODE /* * System Performance Counters */ -#define S_SPC_CFG_SRC0 0 -#define M_SPC_CFG_SRC0 _SB_MAKEMASK(8, S_SPC_CFG_SRC0) -#define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC0) -#define G_SPC_CFG_SRC0(x) _SB_GETVALUE(x, S_SPC_CFG_SRC0, M_SPC_CFG_SRC0) +#define S_SPC_CFG_SRC0 0 +#define M_SPC_CFG_SRC0 _SB_MAKEMASK(8, S_SPC_CFG_SRC0) +#define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC0) +#define G_SPC_CFG_SRC0(x) _SB_GETVALUE(x, S_SPC_CFG_SRC0, M_SPC_CFG_SRC0) -#define S_SPC_CFG_SRC1 8 -#define M_SPC_CFG_SRC1 _SB_MAKEMASK(8, S_SPC_CFG_SRC1) -#define V_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC1) -#define G_SPC_CFG_SRC1(x) _SB_GETVALUE(x, S_SPC_CFG_SRC1, M_SPC_CFG_SRC1) +#define S_SPC_CFG_SRC1 8 +#define M_SPC_CFG_SRC1 _SB_MAKEMASK(8, S_SPC_CFG_SRC1) +#define V_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC1) +#define G_SPC_CFG_SRC1(x) _SB_GETVALUE(x, S_SPC_CFG_SRC1, M_SPC_CFG_SRC1) -#define S_SPC_CFG_SRC2 16 -#define M_SPC_CFG_SRC2 _SB_MAKEMASK(8, S_SPC_CFG_SRC2) -#define V_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC2) -#define G_SPC_CFG_SRC2(x) _SB_GETVALUE(x, S_SPC_CFG_SRC2, M_SPC_CFG_SRC2) +#define S_SPC_CFG_SRC2 16 +#define M_SPC_CFG_SRC2 _SB_MAKEMASK(8, S_SPC_CFG_SRC2) +#define V_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC2) +#define G_SPC_CFG_SRC2(x) _SB_GETVALUE(x, S_SPC_CFG_SRC2, M_SPC_CFG_SRC2) -#define S_SPC_CFG_SRC3 24 -#define M_SPC_CFG_SRC3 _SB_MAKEMASK(8, S_SPC_CFG_SRC3) -#define V_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC3) -#define G_SPC_CFG_SRC3(x) _SB_GETVALUE(x, S_SPC_CFG_SRC3, M_SPC_CFG_SRC3) +#define S_SPC_CFG_SRC3 24 +#define M_SPC_CFG_SRC3 _SB_MAKEMASK(8, S_SPC_CFG_SRC3) +#define V_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC3) +#define G_SPC_CFG_SRC3(x) _SB_GETVALUE(x, S_SPC_CFG_SRC3, M_SPC_CFG_SRC3) #if SIBYTE_HDR_FEATURE_1250_112x #define M_SPC_CFG_CLEAR _SB_MAKEMASK1(32) @@ -411,58 +411,58 @@ * Bus Watcher */ -#define S_SCD_BERR_TID 8 -#define M_SCD_BERR_TID _SB_MAKEMASK(10, S_SCD_BERR_TID) -#define V_SCD_BERR_TID(x) _SB_MAKEVALUE(x, S_SCD_BERR_TID) -#define G_SCD_BERR_TID(x) _SB_GETVALUE(x, S_SCD_BERR_TID, M_SCD_BERR_TID) +#define S_SCD_BERR_TID 8 +#define M_SCD_BERR_TID _SB_MAKEMASK(10, S_SCD_BERR_TID) +#define V_SCD_BERR_TID(x) _SB_MAKEVALUE(x, S_SCD_BERR_TID) +#define G_SCD_BERR_TID(x) _SB_GETVALUE(x, S_SCD_BERR_TID, M_SCD_BERR_TID) -#define S_SCD_BERR_RID 18 -#define M_SCD_BERR_RID _SB_MAKEMASK(4, S_SCD_BERR_RID) -#define V_SCD_BERR_RID(x) _SB_MAKEVALUE(x, S_SCD_BERR_RID) -#define G_SCD_BERR_RID(x) _SB_GETVALUE(x, S_SCD_BERR_RID, M_SCD_BERR_RID) +#define S_SCD_BERR_RID 18 +#define M_SCD_BERR_RID _SB_MAKEMASK(4, S_SCD_BERR_RID) +#define V_SCD_BERR_RID(x) _SB_MAKEVALUE(x, S_SCD_BERR_RID) +#define G_SCD_BERR_RID(x) _SB_GETVALUE(x, S_SCD_BERR_RID, M_SCD_BERR_RID) -#define S_SCD_BERR_DCODE 22 -#define M_SCD_BERR_DCODE _SB_MAKEMASK(3, S_SCD_BERR_DCODE) -#define V_SCD_BERR_DCODE(x) _SB_MAKEVALUE(x, S_SCD_BERR_DCODE) -#define G_SCD_BERR_DCODE(x) _SB_GETVALUE(x, S_SCD_BERR_DCODE, M_SCD_BERR_DCODE) +#define S_SCD_BERR_DCODE 22 +#define M_SCD_BERR_DCODE _SB_MAKEMASK(3, S_SCD_BERR_DCODE) +#define V_SCD_BERR_DCODE(x) _SB_MAKEVALUE(x, S_SCD_BERR_DCODE) +#define G_SCD_BERR_DCODE(x) _SB_GETVALUE(x, S_SCD_BERR_DCODE, M_SCD_BERR_DCODE) -#define M_SCD_BERR_MULTERRS _SB_MAKEMASK1(30) +#define M_SCD_BERR_MULTERRS _SB_MAKEMASK1(30) -#define S_SCD_L2ECC_CORR_D 0 -#define M_SCD_L2ECC_CORR_D _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_D) -#define V_SCD_L2ECC_CORR_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_D) -#define G_SCD_L2ECC_CORR_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_D, M_SCD_L2ECC_CORR_D) +#define S_SCD_L2ECC_CORR_D 0 +#define M_SCD_L2ECC_CORR_D _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_D) +#define V_SCD_L2ECC_CORR_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_D) +#define G_SCD_L2ECC_CORR_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_D, M_SCD_L2ECC_CORR_D) -#define S_SCD_L2ECC_BAD_D 8 -#define M_SCD_L2ECC_BAD_D _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_D) -#define V_SCD_L2ECC_BAD_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_D) -#define G_SCD_L2ECC_BAD_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_D, M_SCD_L2ECC_BAD_D) +#define S_SCD_L2ECC_BAD_D 8 +#define M_SCD_L2ECC_BAD_D _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_D) +#define V_SCD_L2ECC_BAD_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_D) +#define G_SCD_L2ECC_BAD_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_D, M_SCD_L2ECC_BAD_D) -#define S_SCD_L2ECC_CORR_T 16 -#define M_SCD_L2ECC_CORR_T _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_T) -#define V_SCD_L2ECC_CORR_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_T) -#define G_SCD_L2ECC_CORR_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_T, M_SCD_L2ECC_CORR_T) +#define S_SCD_L2ECC_CORR_T 16 +#define M_SCD_L2ECC_CORR_T _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_T) +#define V_SCD_L2ECC_CORR_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_T) +#define G_SCD_L2ECC_CORR_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_T, M_SCD_L2ECC_CORR_T) -#define S_SCD_L2ECC_BAD_T 24 -#define M_SCD_L2ECC_BAD_T _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_T) -#define V_SCD_L2ECC_BAD_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_T) -#define G_SCD_L2ECC_BAD_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_T, M_SCD_L2ECC_BAD_T) +#define S_SCD_L2ECC_BAD_T 24 +#define M_SCD_L2ECC_BAD_T _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_T) +#define V_SCD_L2ECC_BAD_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_T) +#define G_SCD_L2ECC_BAD_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_T, M_SCD_L2ECC_BAD_T) -#define S_SCD_MEM_ECC_CORR 0 -#define M_SCD_MEM_ECC_CORR _SB_MAKEMASK(8, S_SCD_MEM_ECC_CORR) -#define V_SCD_MEM_ECC_CORR(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_CORR) -#define G_SCD_MEM_ECC_CORR(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_CORR, M_SCD_MEM_ECC_CORR) +#define S_SCD_MEM_ECC_CORR 0 +#define M_SCD_MEM_ECC_CORR _SB_MAKEMASK(8, S_SCD_MEM_ECC_CORR) +#define V_SCD_MEM_ECC_CORR(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_CORR) +#define G_SCD_MEM_ECC_CORR(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_CORR, M_SCD_MEM_ECC_CORR) -#define S_SCD_MEM_ECC_BAD 8 -#define M_SCD_MEM_ECC_BAD _SB_MAKEMASK(8, S_SCD_MEM_ECC_BAD) -#define V_SCD_MEM_ECC_BAD(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_BAD) -#define G_SCD_MEM_ECC_BAD(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_BAD, M_SCD_MEM_ECC_BAD) +#define S_SCD_MEM_ECC_BAD 8 +#define M_SCD_MEM_ECC_BAD _SB_MAKEMASK(8, S_SCD_MEM_ECC_BAD) +#define V_SCD_MEM_ECC_BAD(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_BAD) +#define G_SCD_MEM_ECC_BAD(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_BAD, M_SCD_MEM_ECC_BAD) -#define S_SCD_MEM_BUSERR 16 -#define M_SCD_MEM_BUSERR _SB_MAKEMASK(8, S_SCD_MEM_BUSERR) -#define V_SCD_MEM_BUSERR(x) _SB_MAKEVALUE(x, S_SCD_MEM_BUSERR) -#define G_SCD_MEM_BUSERR(x) _SB_GETVALUE(x, S_SCD_MEM_BUSERR, M_SCD_MEM_BUSERR) +#define S_SCD_MEM_BUSERR 16 +#define M_SCD_MEM_BUSERR _SB_MAKEMASK(8, S_SCD_MEM_BUSERR) +#define V_SCD_MEM_BUSERR(x) _SB_MAKEVALUE(x, S_SCD_MEM_BUSERR) +#define G_SCD_MEM_BUSERR(x) _SB_GETVALUE(x, S_SCD_MEM_BUSERR, M_SCD_MEM_BUSERR) /* @@ -473,28 +473,28 @@ #define M_ATRAP_INDEX _SB_MAKEMASK(4, 0) #define M_ATRAP_ADDRESS _SB_MAKEMASK(40, 0) -#define S_ATRAP_CFG_CNT 0 -#define M_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_ATRAP_CFG_CNT) -#define V_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_CNT) -#define G_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_ATRAP_CFG_CNT, M_ATRAP_CFG_CNT) +#define S_ATRAP_CFG_CNT 0 +#define M_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_ATRAP_CFG_CNT) +#define V_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_CNT) +#define G_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_ATRAP_CFG_CNT, M_ATRAP_CFG_CNT) #define M_ATRAP_CFG_WRITE _SB_MAKEMASK1(3) -#define M_ATRAP_CFG_ALL _SB_MAKEMASK1(4) -#define M_ATRAP_CFG_INV _SB_MAKEMASK1(5) +#define M_ATRAP_CFG_ALL _SB_MAKEMASK1(4) +#define M_ATRAP_CFG_INV _SB_MAKEMASK1(5) #define M_ATRAP_CFG_USESRC _SB_MAKEMASK1(6) #define M_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7) -#define S_ATRAP_CFG_AGENTID 8 -#define M_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_ATRAP_CFG_AGENTID) -#define V_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_AGENTID) -#define G_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_ATRAP_CFG_AGENTID, M_ATRAP_CFG_AGENTID) +#define S_ATRAP_CFG_AGENTID 8 +#define M_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_ATRAP_CFG_AGENTID) +#define V_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_AGENTID) +#define G_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_ATRAP_CFG_AGENTID, M_ATRAP_CFG_AGENTID) #define K_BUS_AGENT_CPU0 0 #define K_BUS_AGENT_CPU1 1 #define K_BUS_AGENT_IOB0 2 #define K_BUS_AGENT_IOB1 3 -#define K_BUS_AGENT_SCD 4 -#define K_BUS_AGENT_L2C 6 +#define K_BUS_AGENT_SCD 4 +#define K_BUS_AGENT_L2C 6 #define K_BUS_AGENT_MC 7 #define S_ATRAP_CFG_CATTR 12 @@ -503,13 +503,13 @@ #define G_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_ATRAP_CFG_CATTR, M_ATRAP_CFG_CATTR) #define K_ATRAP_CFG_CATTR_IGNORE 0 -#define K_ATRAP_CFG_CATTR_UNC 1 +#define K_ATRAP_CFG_CATTR_UNC 1 #define K_ATRAP_CFG_CATTR_CACHEABLE 2 -#define K_ATRAP_CFG_CATTR_NONCOH 3 +#define K_ATRAP_CFG_CATTR_NONCOH 3 #define K_ATRAP_CFG_CATTR_COHERENT 4 #define K_ATRAP_CFG_CATTR_NOTUNC 5 #define K_ATRAP_CFG_CATTR_NOTNONCOH 6 -#define K_ATRAP_CFG_CATTR_NOTCOHERENT 7 +#define K_ATRAP_CFG_CATTR_NOTCOHERENT 7 #endif /* 1250/112x */ @@ -517,16 +517,16 @@ * Trace Buffer Config register */ -#define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0) -#define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1) -#define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2) -#define M_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3) -#define M_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4) -#define M_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5) -#define M_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6) -#define M_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7) +#define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0) +#define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1) +#define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2) +#define M_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3) +#define M_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4) +#define M_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5) +#define M_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6) +#define M_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define M_SCD_TRACE_CFG_FORCECNT _SB_MAKEMASK1(8) +#define M_SCD_TRACE_CFG_FORCECNT _SB_MAKEMASK1(8) #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ /* @@ -534,121 +534,121 @@ * a slightly different place in the register. */ #if SIBYTE_HDR_FEATURE_1250_112x -#define S_SCD_TRACE_CFG_CUR_ADDR 10 +#define S_SCD_TRACE_CFG_CUR_ADDR 10 #else #if SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_SCD_TRACE_CFG_CUR_ADDR 24 +#define S_SCD_TRACE_CFG_CUR_ADDR 24 #endif /* 1480 */ -#endif /* 1250/112x */ +#endif /* 1250/112x */ -#define M_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8, S_SCD_TRACE_CFG_CUR_ADDR) -#define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR) -#define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR, M_SCD_TRACE_CFG_CUR_ADDR) +#define M_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8, S_SCD_TRACE_CFG_CUR_ADDR) +#define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR) +#define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR, M_SCD_TRACE_CFG_CUR_ADDR) /* * Trace Event registers */ -#define S_SCD_TREVT_ADDR_MATCH 0 -#define M_SCD_TREVT_ADDR_MATCH _SB_MAKEMASK(4, S_SCD_TREVT_ADDR_MATCH) -#define V_SCD_TREVT_ADDR_MATCH(x) _SB_MAKEVALUE(x, S_SCD_TREVT_ADDR_MATCH) -#define G_SCD_TREVT_ADDR_MATCH(x) _SB_GETVALUE(x, S_SCD_TREVT_ADDR_MATCH, M_SCD_TREVT_ADDR_MATCH) - -#define M_SCD_TREVT_REQID_MATCH _SB_MAKEMASK1(4) -#define M_SCD_TREVT_DATAID_MATCH _SB_MAKEMASK1(5) -#define M_SCD_TREVT_RESPID_MATCH _SB_MAKEMASK1(6) -#define M_SCD_TREVT_INTERRUPT _SB_MAKEMASK1(7) -#define M_SCD_TREVT_DEBUG_PIN _SB_MAKEMASK1(9) -#define M_SCD_TREVT_WRITE _SB_MAKEMASK1(10) -#define M_SCD_TREVT_READ _SB_MAKEMASK1(11) - -#define S_SCD_TREVT_REQID 12 -#define M_SCD_TREVT_REQID _SB_MAKEMASK(4, S_SCD_TREVT_REQID) -#define V_SCD_TREVT_REQID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_REQID) -#define G_SCD_TREVT_REQID(x) _SB_GETVALUE(x, S_SCD_TREVT_REQID, M_SCD_TREVT_REQID) - -#define S_SCD_TREVT_RESPID 16 -#define M_SCD_TREVT_RESPID _SB_MAKEMASK(4, S_SCD_TREVT_RESPID) -#define V_SCD_TREVT_RESPID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_RESPID) -#define G_SCD_TREVT_RESPID(x) _SB_GETVALUE(x, S_SCD_TREVT_RESPID, M_SCD_TREVT_RESPID) - -#define S_SCD_TREVT_DATAID 20 -#define M_SCD_TREVT_DATAID _SB_MAKEMASK(4, S_SCD_TREVT_DATAID) -#define V_SCD_TREVT_DATAID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_DATAID) -#define G_SCD_TREVT_DATAID(x) _SB_GETVALUE(x, S_SCD_TREVT_DATAID, M_SCD_TREVT_DATID) - -#define S_SCD_TREVT_COUNT 24 -#define M_SCD_TREVT_COUNT _SB_MAKEMASK(8, S_SCD_TREVT_COUNT) -#define V_SCD_TREVT_COUNT(x) _SB_MAKEVALUE(x, S_SCD_TREVT_COUNT) -#define G_SCD_TREVT_COUNT(x) _SB_GETVALUE(x, S_SCD_TREVT_COUNT, M_SCD_TREVT_COUNT) +#define S_SCD_TREVT_ADDR_MATCH 0 +#define M_SCD_TREVT_ADDR_MATCH _SB_MAKEMASK(4, S_SCD_TREVT_ADDR_MATCH) +#define V_SCD_TREVT_ADDR_MATCH(x) _SB_MAKEVALUE(x, S_SCD_TREVT_ADDR_MATCH) +#define G_SCD_TREVT_ADDR_MATCH(x) _SB_GETVALUE(x, S_SCD_TREVT_ADDR_MATCH, M_SCD_TREVT_ADDR_MATCH) + +#define M_SCD_TREVT_REQID_MATCH _SB_MAKEMASK1(4) +#define M_SCD_TREVT_DATAID_MATCH _SB_MAKEMASK1(5) +#define M_SCD_TREVT_RESPID_MATCH _SB_MAKEMASK1(6) +#define M_SCD_TREVT_INTERRUPT _SB_MAKEMASK1(7) +#define M_SCD_TREVT_DEBUG_PIN _SB_MAKEMASK1(9) +#define M_SCD_TREVT_WRITE _SB_MAKEMASK1(10) +#define M_SCD_TREVT_READ _SB_MAKEMASK1(11) + +#define S_SCD_TREVT_REQID 12 +#define M_SCD_TREVT_REQID _SB_MAKEMASK(4, S_SCD_TREVT_REQID) +#define V_SCD_TREVT_REQID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_REQID) +#define G_SCD_TREVT_REQID(x) _SB_GETVALUE(x, S_SCD_TREVT_REQID, M_SCD_TREVT_REQID) + +#define S_SCD_TREVT_RESPID 16 +#define M_SCD_TREVT_RESPID _SB_MAKEMASK(4, S_SCD_TREVT_RESPID) +#define V_SCD_TREVT_RESPID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_RESPID) +#define G_SCD_TREVT_RESPID(x) _SB_GETVALUE(x, S_SCD_TREVT_RESPID, M_SCD_TREVT_RESPID) + +#define S_SCD_TREVT_DATAID 20 +#define M_SCD_TREVT_DATAID _SB_MAKEMASK(4, S_SCD_TREVT_DATAID) +#define V_SCD_TREVT_DATAID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_DATAID) +#define G_SCD_TREVT_DATAID(x) _SB_GETVALUE(x, S_SCD_TREVT_DATAID, M_SCD_TREVT_DATID) + +#define S_SCD_TREVT_COUNT 24 +#define M_SCD_TREVT_COUNT _SB_MAKEMASK(8, S_SCD_TREVT_COUNT) +#define V_SCD_TREVT_COUNT(x) _SB_MAKEVALUE(x, S_SCD_TREVT_COUNT) +#define G_SCD_TREVT_COUNT(x) _SB_GETVALUE(x, S_SCD_TREVT_COUNT, M_SCD_TREVT_COUNT) /* * Trace Sequence registers */ -#define S_SCD_TRSEQ_EVENT4 0 -#define M_SCD_TRSEQ_EVENT4 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT4) -#define V_SCD_TRSEQ_EVENT4(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT4) -#define G_SCD_TRSEQ_EVENT4(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT4, M_SCD_TRSEQ_EVENT4) - -#define S_SCD_TRSEQ_EVENT3 4 -#define M_SCD_TRSEQ_EVENT3 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT3) -#define V_SCD_TRSEQ_EVENT3(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT3) -#define G_SCD_TRSEQ_EVENT3(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT3, M_SCD_TRSEQ_EVENT3) - -#define S_SCD_TRSEQ_EVENT2 8 -#define M_SCD_TRSEQ_EVENT2 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT2) -#define V_SCD_TRSEQ_EVENT2(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT2) -#define G_SCD_TRSEQ_EVENT2(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT2, M_SCD_TRSEQ_EVENT2) - -#define S_SCD_TRSEQ_EVENT1 12 -#define M_SCD_TRSEQ_EVENT1 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT1) -#define V_SCD_TRSEQ_EVENT1(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT1) -#define G_SCD_TRSEQ_EVENT1(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT1, M_SCD_TRSEQ_EVENT1) - -#define K_SCD_TRSEQ_E0 0 -#define K_SCD_TRSEQ_E1 1 -#define K_SCD_TRSEQ_E2 2 -#define K_SCD_TRSEQ_E3 3 -#define K_SCD_TRSEQ_E0_E1 4 -#define K_SCD_TRSEQ_E1_E2 5 -#define K_SCD_TRSEQ_E2_E3 6 -#define K_SCD_TRSEQ_E0_E1_E2 7 -#define K_SCD_TRSEQ_E0_E1_E2_E3 8 -#define K_SCD_TRSEQ_E0E1 9 -#define K_SCD_TRSEQ_E0E1E2 10 -#define K_SCD_TRSEQ_E0E1E2E3 11 -#define K_SCD_TRSEQ_E0E1_E2 12 -#define K_SCD_TRSEQ_E0E1_E2E3 13 -#define K_SCD_TRSEQ_E0E1_E2_E3 14 -#define K_SCD_TRSEQ_IGNORED 15 - -#define K_SCD_TRSEQ_TRIGGER_ALL (V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \ - V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \ - V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \ - V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED)) - -#define S_SCD_TRSEQ_FUNCTION 16 -#define M_SCD_TRSEQ_FUNCTION _SB_MAKEMASK(4, S_SCD_TRSEQ_FUNCTION) -#define V_SCD_TRSEQ_FUNCTION(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_FUNCTION) -#define G_SCD_TRSEQ_FUNCTION(x) _SB_GETVALUE(x, S_SCD_TRSEQ_FUNCTION, M_SCD_TRSEQ_FUNCTION) - -#define K_SCD_TRSEQ_FUNC_NOP 0 -#define K_SCD_TRSEQ_FUNC_START 1 -#define K_SCD_TRSEQ_FUNC_STOP 2 -#define K_SCD_TRSEQ_FUNC_FREEZE 3 - -#define V_SCD_TRSEQ_FUNC_NOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP) -#define V_SCD_TRSEQ_FUNC_START V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START) -#define V_SCD_TRSEQ_FUNC_STOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP) -#define V_SCD_TRSEQ_FUNC_FREEZE V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE) - -#define M_SCD_TRSEQ_ASAMPLE _SB_MAKEMASK1(18) -#define M_SCD_TRSEQ_DSAMPLE _SB_MAKEMASK1(19) -#define M_SCD_TRSEQ_DEBUGPIN _SB_MAKEMASK1(20) -#define M_SCD_TRSEQ_DEBUGCPU _SB_MAKEMASK1(21) -#define M_SCD_TRSEQ_CLEARUSE _SB_MAKEMASK1(22) -#define M_SCD_TRSEQ_ALLD_A _SB_MAKEMASK1(23) -#define M_SCD_TRSEQ_ALL_A _SB_MAKEMASK1(24) +#define S_SCD_TRSEQ_EVENT4 0 +#define M_SCD_TRSEQ_EVENT4 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT4) +#define V_SCD_TRSEQ_EVENT4(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT4) +#define G_SCD_TRSEQ_EVENT4(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT4, M_SCD_TRSEQ_EVENT4) + +#define S_SCD_TRSEQ_EVENT3 4 +#define M_SCD_TRSEQ_EVENT3 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT3) +#define V_SCD_TRSEQ_EVENT3(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT3) +#define G_SCD_TRSEQ_EVENT3(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT3, M_SCD_TRSEQ_EVENT3) + +#define S_SCD_TRSEQ_EVENT2 8 +#define M_SCD_TRSEQ_EVENT2 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT2) +#define V_SCD_TRSEQ_EVENT2(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT2) +#define G_SCD_TRSEQ_EVENT2(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT2, M_SCD_TRSEQ_EVENT2) + +#define S_SCD_TRSEQ_EVENT1 12 +#define M_SCD_TRSEQ_EVENT1 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT1) +#define V_SCD_TRSEQ_EVENT1(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT1) +#define G_SCD_TRSEQ_EVENT1(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT1, M_SCD_TRSEQ_EVENT1) + +#define K_SCD_TRSEQ_E0 0 +#define K_SCD_TRSEQ_E1 1 +#define K_SCD_TRSEQ_E2 2 +#define K_SCD_TRSEQ_E3 3 +#define K_SCD_TRSEQ_E0_E1 4 +#define K_SCD_TRSEQ_E1_E2 5 +#define K_SCD_TRSEQ_E2_E3 6 +#define K_SCD_TRSEQ_E0_E1_E2 7 +#define K_SCD_TRSEQ_E0_E1_E2_E3 8 +#define K_SCD_TRSEQ_E0E1 9 +#define K_SCD_TRSEQ_E0E1E2 10 +#define K_SCD_TRSEQ_E0E1E2E3 11 +#define K_SCD_TRSEQ_E0E1_E2 12 +#define K_SCD_TRSEQ_E0E1_E2E3 13 +#define K_SCD_TRSEQ_E0E1_E2_E3 14 +#define K_SCD_TRSEQ_IGNORED 15 + +#define K_SCD_TRSEQ_TRIGGER_ALL (V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \ + V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \ + V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \ + V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED)) + +#define S_SCD_TRSEQ_FUNCTION 16 +#define M_SCD_TRSEQ_FUNCTION _SB_MAKEMASK(4, S_SCD_TRSEQ_FUNCTION) +#define V_SCD_TRSEQ_FUNCTION(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_FUNCTION) +#define G_SCD_TRSEQ_FUNCTION(x) _SB_GETVALUE(x, S_SCD_TRSEQ_FUNCTION, M_SCD_TRSEQ_FUNCTION) + +#define K_SCD_TRSEQ_FUNC_NOP 0 +#define K_SCD_TRSEQ_FUNC_START 1 +#define K_SCD_TRSEQ_FUNC_STOP 2 +#define K_SCD_TRSEQ_FUNC_FREEZE 3 + +#define V_SCD_TRSEQ_FUNC_NOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP) +#define V_SCD_TRSEQ_FUNC_START V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START) +#define V_SCD_TRSEQ_FUNC_STOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP) +#define V_SCD_TRSEQ_FUNC_FREEZE V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE) + +#define M_SCD_TRSEQ_ASAMPLE _SB_MAKEMASK1(18) +#define M_SCD_TRSEQ_DSAMPLE _SB_MAKEMASK1(19) +#define M_SCD_TRSEQ_DEBUGPIN _SB_MAKEMASK1(20) +#define M_SCD_TRSEQ_DEBUGCPU _SB_MAKEMASK1(21) +#define M_SCD_TRSEQ_CLEARUSE _SB_MAKEMASK1(22) +#define M_SCD_TRSEQ_ALLD_A _SB_MAKEMASK1(23) +#define M_SCD_TRSEQ_ALL_A _SB_MAKEMASK1(24) #endif diff --git a/arch/mips/include/asm/sibyte/sb1250_smbus.h b/arch/mips/include/asm/sibyte/sb1250_smbus.h index 128d6b7..3cb73e8 100644 --- a/arch/mips/include/asm/sibyte/sb1250_smbus.h +++ b/arch/mips/include/asm/sibyte/sb1250_smbus.h @@ -1,7 +1,7 @@ /* ********************************************************************* * SB1250 Board Support Package * - * SMBUS Constants File: sb1250_smbus.h + * SMBUS Constants File: sb1250_smbus.h * * This module contains constants and macros useful for * manipulating the SB1250's SMbus devices. @@ -40,83 +40,83 @@ * SMBus Clock Frequency Register (Table 14-2) */ -#define S_SMB_FREQ_DIV 0 -#define M_SMB_FREQ_DIV _SB_MAKEMASK(13, S_SMB_FREQ_DIV) -#define V_SMB_FREQ_DIV(x) _SB_MAKEVALUE(x, S_SMB_FREQ_DIV) +#define S_SMB_FREQ_DIV 0 +#define M_SMB_FREQ_DIV _SB_MAKEMASK(13, S_SMB_FREQ_DIV) +#define V_SMB_FREQ_DIV(x) _SB_MAKEVALUE(x, S_SMB_FREQ_DIV) #define K_SMB_FREQ_400KHZ 0x1F #define K_SMB_FREQ_100KHZ 0x7D #define K_SMB_FREQ_10KHZ 1250 -#define S_SMB_CMD 0 -#define M_SMB_CMD _SB_MAKEMASK(8, S_SMB_CMD) -#define V_SMB_CMD(x) _SB_MAKEVALUE(x, S_SMB_CMD) +#define S_SMB_CMD 0 +#define M_SMB_CMD _SB_MAKEMASK(8, S_SMB_CMD) +#define V_SMB_CMD(x) _SB_MAKEVALUE(x, S_SMB_CMD) /* * SMBus control register (Table 14-4) */ -#define M_SMB_ERR_INTR _SB_MAKEMASK1(0) -#define M_SMB_FINISH_INTR _SB_MAKEMASK1(1) +#define M_SMB_ERR_INTR _SB_MAKEMASK1(0) +#define M_SMB_FINISH_INTR _SB_MAKEMASK1(1) -#define S_SMB_DATA_OUT 4 -#define M_SMB_DATA_OUT _SB_MAKEMASK1(S_SMB_DATA_OUT) -#define V_SMB_DATA_OUT(x) _SB_MAKEVALUE(x, S_SMB_DATA_OUT) +#define S_SMB_DATA_OUT 4 +#define M_SMB_DATA_OUT _SB_MAKEMASK1(S_SMB_DATA_OUT) +#define V_SMB_DATA_OUT(x) _SB_MAKEVALUE(x, S_SMB_DATA_OUT) -#define M_SMB_DATA_DIR _SB_MAKEMASK1(5) -#define M_SMB_DATA_DIR_OUTPUT M_SMB_DATA_DIR -#define M_SMB_CLK_OUT _SB_MAKEMASK1(6) -#define M_SMB_DIRECT_ENABLE _SB_MAKEMASK1(7) +#define M_SMB_DATA_DIR _SB_MAKEMASK1(5) +#define M_SMB_DATA_DIR_OUTPUT M_SMB_DATA_DIR +#define M_SMB_CLK_OUT _SB_MAKEMASK1(6) +#define M_SMB_DIRECT_ENABLE _SB_MAKEMASK1(7) /* * SMBus status registers (Table 14-5) */ -#define M_SMB_BUSY _SB_MAKEMASK1(0) -#define M_SMB_ERROR _SB_MAKEMASK1(1) -#define M_SMB_ERROR_TYPE _SB_MAKEMASK1(2) +#define M_SMB_BUSY _SB_MAKEMASK1(0) +#define M_SMB_ERROR _SB_MAKEMASK1(1) +#define M_SMB_ERROR_TYPE _SB_MAKEMASK1(2) #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_SMB_SCL_IN 5 -#define M_SMB_SCL_IN _SB_MAKEMASK1(S_SMB_SCL_IN) -#define V_SMB_SCL_IN(x) _SB_MAKEVALUE(x, S_SMB_SCL_IN) -#define G_SMB_SCL_IN(x) _SB_GETVALUE(x, S_SMB_SCL_IN, M_SMB_SCL_IN) +#define S_SMB_SCL_IN 5 +#define M_SMB_SCL_IN _SB_MAKEMASK1(S_SMB_SCL_IN) +#define V_SMB_SCL_IN(x) _SB_MAKEVALUE(x, S_SMB_SCL_IN) +#define G_SMB_SCL_IN(x) _SB_GETVALUE(x, S_SMB_SCL_IN, M_SMB_SCL_IN) #endif /* 1250 PASS3 || 112x PASS1 || 1480 */ -#define S_SMB_REF 6 -#define M_SMB_REF _SB_MAKEMASK1(S_SMB_REF) -#define V_SMB_REF(x) _SB_MAKEVALUE(x, S_SMB_REF) -#define G_SMB_REF(x) _SB_GETVALUE(x, S_SMB_REF, M_SMB_REF) +#define S_SMB_REF 6 +#define M_SMB_REF _SB_MAKEMASK1(S_SMB_REF) +#define V_SMB_REF(x) _SB_MAKEVALUE(x, S_SMB_REF) +#define G_SMB_REF(x) _SB_GETVALUE(x, S_SMB_REF, M_SMB_REF) -#define S_SMB_DATA_IN 7 -#define M_SMB_DATA_IN _SB_MAKEMASK1(S_SMB_DATA_IN) -#define V_SMB_DATA_IN(x) _SB_MAKEVALUE(x, S_SMB_DATA_IN) -#define G_SMB_DATA_IN(x) _SB_GETVALUE(x, S_SMB_DATA_IN, M_SMB_DATA_IN) +#define S_SMB_DATA_IN 7 +#define M_SMB_DATA_IN _SB_MAKEMASK1(S_SMB_DATA_IN) +#define V_SMB_DATA_IN(x) _SB_MAKEVALUE(x, S_SMB_DATA_IN) +#define G_SMB_DATA_IN(x) _SB_GETVALUE(x, S_SMB_DATA_IN, M_SMB_DATA_IN) /* * SMBus Start/Command registers (Table 14-9) */ -#define S_SMB_ADDR 0 -#define M_SMB_ADDR _SB_MAKEMASK(7, S_SMB_ADDR) -#define V_SMB_ADDR(x) _SB_MAKEVALUE(x, S_SMB_ADDR) -#define G_SMB_ADDR(x) _SB_GETVALUE(x, S_SMB_ADDR, M_SMB_ADDR) +#define S_SMB_ADDR 0 +#define M_SMB_ADDR _SB_MAKEMASK(7, S_SMB_ADDR) +#define V_SMB_ADDR(x) _SB_MAKEVALUE(x, S_SMB_ADDR) +#define G_SMB_ADDR(x) _SB_GETVALUE(x, S_SMB_ADDR, M_SMB_ADDR) -#define M_SMB_QDATA _SB_MAKEMASK1(7) +#define M_SMB_QDATA _SB_MAKEMASK1(7) -#define S_SMB_TT 8 -#define M_SMB_TT _SB_MAKEMASK(3, S_SMB_TT) -#define V_SMB_TT(x) _SB_MAKEVALUE(x, S_SMB_TT) -#define G_SMB_TT(x) _SB_GETVALUE(x, S_SMB_TT, M_SMB_TT) +#define S_SMB_TT 8 +#define M_SMB_TT _SB_MAKEMASK(3, S_SMB_TT) +#define V_SMB_TT(x) _SB_MAKEVALUE(x, S_SMB_TT) +#define G_SMB_TT(x) _SB_GETVALUE(x, S_SMB_TT, M_SMB_TT) -#define K_SMB_TT_WR1BYTE 0 -#define K_SMB_TT_WR2BYTE 1 -#define K_SMB_TT_WR3BYTE 2 -#define K_SMB_TT_CMD_RD1BYTE 3 -#define K_SMB_TT_CMD_RD2BYTE 4 -#define K_SMB_TT_RD1BYTE 5 -#define K_SMB_TT_QUICKCMD 6 -#define K_SMB_TT_EEPROMREAD 7 +#define K_SMB_TT_WR1BYTE 0 +#define K_SMB_TT_WR2BYTE 1 +#define K_SMB_TT_WR3BYTE 2 +#define K_SMB_TT_CMD_RD1BYTE 3 +#define K_SMB_TT_CMD_RD2BYTE 4 +#define K_SMB_TT_RD1BYTE 5 +#define K_SMB_TT_QUICKCMD 6 +#define K_SMB_TT_EEPROMREAD 7 #define V_SMB_TT_WR1BYTE V_SMB_TT(K_SMB_TT_WR1BYTE) #define V_SMB_TT_WR2BYTE V_SMB_TT(K_SMB_TT_WR2BYTE) @@ -127,51 +127,51 @@ #define V_SMB_TT_QUICKCMD V_SMB_TT(K_SMB_TT_QUICKCMD) #define V_SMB_TT_EEPROMREAD V_SMB_TT(K_SMB_TT_EEPROMREAD) -#define M_SMB_PEC _SB_MAKEMASK1(15) +#define M_SMB_PEC _SB_MAKEMASK1(15) /* * SMBus Data Register (Table 14-6) and SMBus Extra Register (Table 14-7) */ -#define S_SMB_LB 0 -#define M_SMB_LB _SB_MAKEMASK(8, S_SMB_LB) -#define V_SMB_LB(x) _SB_MAKEVALUE(x, S_SMB_LB) +#define S_SMB_LB 0 +#define M_SMB_LB _SB_MAKEMASK(8, S_SMB_LB) +#define V_SMB_LB(x) _SB_MAKEVALUE(x, S_SMB_LB) -#define S_SMB_MB 8 -#define M_SMB_MB _SB_MAKEMASK(8, S_SMB_MB) -#define V_SMB_MB(x) _SB_MAKEVALUE(x, S_SMB_MB) +#define S_SMB_MB 8 +#define M_SMB_MB _SB_MAKEMASK(8, S_SMB_MB) +#define V_SMB_MB(x) _SB_MAKEVALUE(x, S_SMB_MB) /* * SMBus Packet Error Check register (Table 14-8) */ -#define S_SPEC_PEC 0 -#define M_SPEC_PEC _SB_MAKEMASK(8, S_SPEC_PEC) -#define V_SPEC_MB(x) _SB_MAKEVALUE(x, S_SPEC_PEC) +#define S_SPEC_PEC 0 +#define M_SPEC_PEC _SB_MAKEMASK(8, S_SPEC_PEC) +#define V_SPEC_MB(x) _SB_MAKEVALUE(x, S_SPEC_PEC) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) -#define S_SMB_CMDH 8 -#define M_SMB_CMDH _SB_MAKEMASK(8, S_SMB_CMDH) -#define V_SMB_CMDH(x) _SB_MAKEVALUE(x, S_SMB_CMDH) +#define S_SMB_CMDH 8 +#define M_SMB_CMDH _SB_MAKEMASK(8, S_SMB_CMDH) +#define V_SMB_CMDH(x) _SB_MAKEVALUE(x, S_SMB_CMDH) #define M_SMB_EXTEND _SB_MAKEMASK1(14) -#define S_SMB_DFMT 8 -#define M_SMB_DFMT _SB_MAKEMASK(3, S_SMB_DFMT) -#define V_SMB_DFMT(x) _SB_MAKEVALUE(x, S_SMB_DFMT) -#define G_SMB_DFMT(x) _SB_GETVALUE(x, S_SMB_DFMT, M_SMB_DFMT) +#define S_SMB_DFMT 8 +#define M_SMB_DFMT _SB_MAKEMASK(3, S_SMB_DFMT) +#define V_SMB_DFMT(x) _SB_MAKEVALUE(x, S_SMB_DFMT) +#define G_SMB_DFMT(x) _SB_GETVALUE(x, S_SMB_DFMT, M_SMB_DFMT) -#define K_SMB_DFMT_1BYTE 0 -#define K_SMB_DFMT_2BYTE 1 -#define K_SMB_DFMT_3BYTE 2 -#define K_SMB_DFMT_4BYTE 3 -#define K_SMB_DFMT_NODATA 4 -#define K_SMB_DFMT_CMD4BYTE 5 -#define K_SMB_DFMT_CMD5BYTE 6 -#define K_SMB_DFMT_RESERVED 7 +#define K_SMB_DFMT_1BYTE 0 +#define K_SMB_DFMT_2BYTE 1 +#define K_SMB_DFMT_3BYTE 2 +#define K_SMB_DFMT_4BYTE 3 +#define K_SMB_DFMT_NODATA 4 +#define K_SMB_DFMT_CMD4BYTE 5 +#define K_SMB_DFMT_CMD5BYTE 6 +#define K_SMB_DFMT_RESERVED 7 #define V_SMB_DFMT_1BYTE V_SMB_DFMT(K_SMB_DFMT_1BYTE) #define V_SMB_DFMT_2BYTE V_SMB_DFMT(K_SMB_DFMT_2BYTE) @@ -182,13 +182,13 @@ #define V_SMB_DFMT_CMD5BYTE V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE) #define V_SMB_DFMT_RESERVED V_SMB_DFMT(K_SMB_DFMT_RESERVED) -#define S_SMB_AFMT 11 -#define M_SMB_AFMT _SB_MAKEMASK(2, S_SMB_AFMT) -#define V_SMB_AFMT(x) _SB_MAKEVALUE(x, S_SMB_AFMT) -#define G_SMB_AFMT(x) _SB_GETVALUE(x, S_SMB_AFMT, M_SMB_AFMT) +#define S_SMB_AFMT 11 +#define M_SMB_AFMT _SB_MAKEMASK(2, S_SMB_AFMT) +#define V_SMB_AFMT(x) _SB_MAKEVALUE(x, S_SMB_AFMT) +#define G_SMB_AFMT(x) _SB_GETVALUE(x, S_SMB_AFMT, M_SMB_AFMT) -#define K_SMB_AFMT_NONE 0 -#define K_SMB_AFMT_ADDR 1 +#define K_SMB_AFMT_NONE 0 +#define K_SMB_AFMT_ADDR 1 #define K_SMB_AFMT_ADDR_CMD1BYTE 2 #define K_SMB_AFMT_ADDR_CMD2BYTE 3 diff --git a/arch/mips/include/asm/sibyte/sb1250_syncser.h b/arch/mips/include/asm/sibyte/sb1250_syncser.h index 274e917..b3acc75 100644 --- a/arch/mips/include/asm/sibyte/sb1250_syncser.h +++ b/arch/mips/include/asm/sibyte/sb1250_syncser.h @@ -1,7 +1,7 @@ /* ********************************************************************* * SB1250 Board Support Package * - * Synchronous Serial Constants File: sb1250_syncser.h + * Synchronous Serial Constants File: sb1250_syncser.h * * This module contains constants and macros useful for * manipulating the SB1250's Synchronous Serial @@ -39,108 +39,108 @@ * Serial Mode Configuration Register */ -#define M_SYNCSER_CRC_MODE _SB_MAKEMASK1(0) -#define M_SYNCSER_MSB_FIRST _SB_MAKEMASK1(1) +#define M_SYNCSER_CRC_MODE _SB_MAKEMASK1(0) +#define M_SYNCSER_MSB_FIRST _SB_MAKEMASK1(1) -#define S_SYNCSER_FLAG_NUM 2 -#define M_SYNCSER_FLAG_NUM _SB_MAKEMASK(4, S_SYNCSER_FLAG_NUM) -#define V_SYNCSER_FLAG_NUM _SB_MAKEVALUE(x, S_SYNCSER_FLAG_NUM) +#define S_SYNCSER_FLAG_NUM 2 +#define M_SYNCSER_FLAG_NUM _SB_MAKEMASK(4, S_SYNCSER_FLAG_NUM) +#define V_SYNCSER_FLAG_NUM _SB_MAKEVALUE(x, S_SYNCSER_FLAG_NUM) -#define M_SYNCSER_FLAG_EN _SB_MAKEMASK1(6) -#define M_SYNCSER_HDLC_EN _SB_MAKEMASK1(7) -#define M_SYNCSER_LOOP_MODE _SB_MAKEMASK1(8) -#define M_SYNCSER_LOOPBACK _SB_MAKEMASK1(9) +#define M_SYNCSER_FLAG_EN _SB_MAKEMASK1(6) +#define M_SYNCSER_HDLC_EN _SB_MAKEMASK1(7) +#define M_SYNCSER_LOOP_MODE _SB_MAKEMASK1(8) +#define M_SYNCSER_LOOPBACK _SB_MAKEMASK1(9) /* * Serial Clock Source and Line Interface Mode Register */ -#define M_SYNCSER_RXCLK_INV _SB_MAKEMASK1(0) -#define M_SYNCSER_RXCLK_EXT _SB_MAKEMASK1(1) +#define M_SYNCSER_RXCLK_INV _SB_MAKEMASK1(0) +#define M_SYNCSER_RXCLK_EXT _SB_MAKEMASK1(1) -#define S_SYNCSER_RXSYNC_DLY 2 -#define M_SYNCSER_RXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_RXSYNC_DLY) -#define V_SYNCSER_RXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_RXSYNC_DLY) +#define S_SYNCSER_RXSYNC_DLY 2 +#define M_SYNCSER_RXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_RXSYNC_DLY) +#define V_SYNCSER_RXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_RXSYNC_DLY) -#define M_SYNCSER_RXSYNC_LOW _SB_MAKEMASK1(4) -#define M_SYNCSER_RXSTRB_LOW _SB_MAKEMASK1(5) +#define M_SYNCSER_RXSYNC_LOW _SB_MAKEMASK1(4) +#define M_SYNCSER_RXSTRB_LOW _SB_MAKEMASK1(5) -#define M_SYNCSER_RXSYNC_EDGE _SB_MAKEMASK1(6) -#define M_SYNCSER_RXSYNC_INT _SB_MAKEMASK1(7) +#define M_SYNCSER_RXSYNC_EDGE _SB_MAKEMASK1(6) +#define M_SYNCSER_RXSYNC_INT _SB_MAKEMASK1(7) -#define M_SYNCSER_TXCLK_INV _SB_MAKEMASK1(8) -#define M_SYNCSER_TXCLK_EXT _SB_MAKEMASK1(9) +#define M_SYNCSER_TXCLK_INV _SB_MAKEMASK1(8) +#define M_SYNCSER_TXCLK_EXT _SB_MAKEMASK1(9) -#define S_SYNCSER_TXSYNC_DLY 10 -#define M_SYNCSER_TXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_TXSYNC_DLY) -#define V_SYNCSER_TXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_TXSYNC_DLY) +#define S_SYNCSER_TXSYNC_DLY 10 +#define M_SYNCSER_TXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_TXSYNC_DLY) +#define V_SYNCSER_TXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_TXSYNC_DLY) -#define M_SYNCSER_TXSYNC_LOW _SB_MAKEMASK1(12) -#define M_SYNCSER_TXSTRB_LOW _SB_MAKEMASK1(13) +#define M_SYNCSER_TXSYNC_LOW _SB_MAKEMASK1(12) +#define M_SYNCSER_TXSTRB_LOW _SB_MAKEMASK1(13) -#define M_SYNCSER_TXSYNC_EDGE _SB_MAKEMASK1(14) -#define M_SYNCSER_TXSYNC_INT _SB_MAKEMASK1(15) +#define M_SYNCSER_TXSYNC_EDGE _SB_MAKEMASK1(14) +#define M_SYNCSER_TXSYNC_INT _SB_MAKEMASK1(15) /* * Serial Command Register */ -#define M_SYNCSER_CMD_RX_EN _SB_MAKEMASK1(0) -#define M_SYNCSER_CMD_TX_EN _SB_MAKEMASK1(1) -#define M_SYNCSER_CMD_RX_RESET _SB_MAKEMASK1(2) -#define M_SYNCSER_CMD_TX_RESET _SB_MAKEMASK1(3) -#define M_SYNCSER_CMD_TX_PAUSE _SB_MAKEMASK1(5) +#define M_SYNCSER_CMD_RX_EN _SB_MAKEMASK1(0) +#define M_SYNCSER_CMD_TX_EN _SB_MAKEMASK1(1) +#define M_SYNCSER_CMD_RX_RESET _SB_MAKEMASK1(2) +#define M_SYNCSER_CMD_TX_RESET _SB_MAKEMASK1(3) +#define M_SYNCSER_CMD_TX_PAUSE _SB_MAKEMASK1(5) /* * Serial DMA Enable Register */ -#define M_SYNCSER_DMA_RX_EN _SB_MAKEMASK1(0) -#define M_SYNCSER_DMA_TX_EN _SB_MAKEMASK1(4) +#define M_SYNCSER_DMA_RX_EN _SB_MAKEMASK1(0) +#define M_SYNCSER_DMA_TX_EN _SB_MAKEMASK1(4) /* * Serial Status Register */ -#define M_SYNCSER_RX_CRCERR _SB_MAKEMASK1(0) -#define M_SYNCSER_RX_ABORT _SB_MAKEMASK1(1) -#define M_SYNCSER_RX_OCTET _SB_MAKEMASK1(2) -#define M_SYNCSER_RX_LONGFRM _SB_MAKEMASK1(3) -#define M_SYNCSER_RX_SHORTFRM _SB_MAKEMASK1(4) -#define M_SYNCSER_RX_OVERRUN _SB_MAKEMASK1(5) -#define M_SYNCSER_RX_SYNC_ERR _SB_MAKEMASK1(6) -#define M_SYNCSER_TX_CRCERR _SB_MAKEMASK1(8) -#define M_SYNCSER_TX_UNDERRUN _SB_MAKEMASK1(9) -#define M_SYNCSER_TX_SYNC_ERR _SB_MAKEMASK1(10) -#define M_SYNCSER_TX_PAUSE_COMPLETE _SB_MAKEMASK1(11) -#define M_SYNCSER_RX_EOP_COUNT _SB_MAKEMASK1(16) -#define M_SYNCSER_RX_EOP_TIMER _SB_MAKEMASK1(17) -#define M_SYNCSER_RX_EOP_SEEN _SB_MAKEMASK1(18) -#define M_SYNCSER_RX_HWM _SB_MAKEMASK1(19) -#define M_SYNCSER_RX_LWM _SB_MAKEMASK1(20) -#define M_SYNCSER_RX_DSCR _SB_MAKEMASK1(21) -#define M_SYNCSER_RX_DERR _SB_MAKEMASK1(22) -#define M_SYNCSER_TX_EOP_COUNT _SB_MAKEMASK1(24) -#define M_SYNCSER_TX_EOP_TIMER _SB_MAKEMASK1(25) -#define M_SYNCSER_TX_EOP_SEEN _SB_MAKEMASK1(26) -#define M_SYNCSER_TX_HWM _SB_MAKEMASK1(27) -#define M_SYNCSER_TX_LWM _SB_MAKEMASK1(28) -#define M_SYNCSER_TX_DSCR _SB_MAKEMASK1(29) -#define M_SYNCSER_TX_DERR _SB_MAKEMASK1(30) -#define M_SYNCSER_TX_DZERO _SB_MAKEMASK1(31) +#define M_SYNCSER_RX_CRCERR _SB_MAKEMASK1(0) +#define M_SYNCSER_RX_ABORT _SB_MAKEMASK1(1) +#define M_SYNCSER_RX_OCTET _SB_MAKEMASK1(2) +#define M_SYNCSER_RX_LONGFRM _SB_MAKEMASK1(3) +#define M_SYNCSER_RX_SHORTFRM _SB_MAKEMASK1(4) +#define M_SYNCSER_RX_OVERRUN _SB_MAKEMASK1(5) +#define M_SYNCSER_RX_SYNC_ERR _SB_MAKEMASK1(6) +#define M_SYNCSER_TX_CRCERR _SB_MAKEMASK1(8) +#define M_SYNCSER_TX_UNDERRUN _SB_MAKEMASK1(9) +#define M_SYNCSER_TX_SYNC_ERR _SB_MAKEMASK1(10) +#define M_SYNCSER_TX_PAUSE_COMPLETE _SB_MAKEMASK1(11) +#define M_SYNCSER_RX_EOP_COUNT _SB_MAKEMASK1(16) +#define M_SYNCSER_RX_EOP_TIMER _SB_MAKEMASK1(17) +#define M_SYNCSER_RX_EOP_SEEN _SB_MAKEMASK1(18) +#define M_SYNCSER_RX_HWM _SB_MAKEMASK1(19) +#define M_SYNCSER_RX_LWM _SB_MAKEMASK1(20) +#define M_SYNCSER_RX_DSCR _SB_MAKEMASK1(21) +#define M_SYNCSER_RX_DERR _SB_MAKEMASK1(22) +#define M_SYNCSER_TX_EOP_COUNT _SB_MAKEMASK1(24) +#define M_SYNCSER_TX_EOP_TIMER _SB_MAKEMASK1(25) +#define M_SYNCSER_TX_EOP_SEEN _SB_MAKEMASK1(26) +#define M_SYNCSER_TX_HWM _SB_MAKEMASK1(27) +#define M_SYNCSER_TX_LWM _SB_MAKEMASK1(28) +#define M_SYNCSER_TX_DSCR _SB_MAKEMASK1(29) +#define M_SYNCSER_TX_DERR _SB_MAKEMASK1(30) +#define M_SYNCSER_TX_DZERO _SB_MAKEMASK1(31) /* * Sequencer Table Entry format */ -#define M_SYNCSER_SEQ_LAST _SB_MAKEMASK1(0) -#define M_SYNCSER_SEQ_BYTE _SB_MAKEMASK1(1) +#define M_SYNCSER_SEQ_LAST _SB_MAKEMASK1(0) +#define M_SYNCSER_SEQ_BYTE _SB_MAKEMASK1(1) -#define S_SYNCSER_SEQ_COUNT 2 -#define M_SYNCSER_SEQ_COUNT _SB_MAKEMASK(4, S_SYNCSER_SEQ_COUNT) -#define V_SYNCSER_SEQ_COUNT(x) _SB_MAKEVALUE(x, S_SYNCSER_SEQ_COUNT) +#define S_SYNCSER_SEQ_COUNT 2 +#define M_SYNCSER_SEQ_COUNT _SB_MAKEMASK(4, S_SYNCSER_SEQ_COUNT) +#define V_SYNCSER_SEQ_COUNT(x) _SB_MAKEVALUE(x, S_SYNCSER_SEQ_COUNT) -#define M_SYNCSER_SEQ_ENABLE _SB_MAKEMASK1(6) -#define M_SYNCSER_SEQ_STROBE _SB_MAKEMASK1(7) +#define M_SYNCSER_SEQ_ENABLE _SB_MAKEMASK1(6) +#define M_SYNCSER_SEQ_STROBE _SB_MAKEMASK1(7) #endif diff --git a/arch/mips/include/asm/sibyte/sb1250_uart.h b/arch/mips/include/asm/sibyte/sb1250_uart.h index bb99eca..a43dc19 100644 --- a/arch/mips/include/asm/sibyte/sb1250_uart.h +++ b/arch/mips/include/asm/sibyte/sb1250_uart.h @@ -45,33 +45,33 @@ * Register: DUART_MODE_REG_1_B */ -#define S_DUART_BITS_PER_CHAR 0 -#define M_DUART_BITS_PER_CHAR _SB_MAKEMASK(2, S_DUART_BITS_PER_CHAR) +#define S_DUART_BITS_PER_CHAR 0 +#define M_DUART_BITS_PER_CHAR _SB_MAKEMASK(2, S_DUART_BITS_PER_CHAR) #define V_DUART_BITS_PER_CHAR(x) _SB_MAKEVALUE(x, S_DUART_BITS_PER_CHAR) #define K_DUART_BITS_PER_CHAR_RSV0 0 #define K_DUART_BITS_PER_CHAR_RSV1 1 -#define K_DUART_BITS_PER_CHAR_7 2 -#define K_DUART_BITS_PER_CHAR_8 3 +#define K_DUART_BITS_PER_CHAR_7 2 +#define K_DUART_BITS_PER_CHAR_8 3 #define V_DUART_BITS_PER_CHAR_RSV0 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV0) #define V_DUART_BITS_PER_CHAR_RSV1 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV1) -#define V_DUART_BITS_PER_CHAR_7 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7) -#define V_DUART_BITS_PER_CHAR_8 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8) +#define V_DUART_BITS_PER_CHAR_7 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7) +#define V_DUART_BITS_PER_CHAR_8 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8) #define M_DUART_PARITY_TYPE_EVEN 0x00 -#define M_DUART_PARITY_TYPE_ODD _SB_MAKEMASK1(2) +#define M_DUART_PARITY_TYPE_ODD _SB_MAKEMASK1(2) -#define S_DUART_PARITY_MODE 3 -#define M_DUART_PARITY_MODE _SB_MAKEMASK(2, S_DUART_PARITY_MODE) -#define V_DUART_PARITY_MODE(x) _SB_MAKEVALUE(x, S_DUART_PARITY_MODE) +#define S_DUART_PARITY_MODE 3 +#define M_DUART_PARITY_MODE _SB_MAKEMASK(2, S_DUART_PARITY_MODE) +#define V_DUART_PARITY_MODE(x) _SB_MAKEVALUE(x, S_DUART_PARITY_MODE) -#define K_DUART_PARITY_MODE_ADD 0 +#define K_DUART_PARITY_MODE_ADD 0 #define K_DUART_PARITY_MODE_ADD_FIXED 1 #define K_DUART_PARITY_MODE_NONE 2 -#define V_DUART_PARITY_MODE_ADD V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD) +#define V_DUART_PARITY_MODE_ADD V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD) #define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED) #define V_DUART_PARITY_MODE_NONE V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE) @@ -81,7 +81,7 @@ #define M_DUART_RX_IRQ_SEL_RXRDY 0 #define M_DUART_RX_IRQ_SEL_RXFULL _SB_MAKEMASK1(6) -#define M_DUART_RX_RTS_ENA _SB_MAKEMASK1(7) +#define M_DUART_RX_RTS_ENA _SB_MAKEMASK1(7) /* * DUART Mode Register #2 (Table 10-4) @@ -89,18 +89,18 @@ * Register: DUART_MODE_REG_2_B */ -#define M_DUART_MODE_RESERVED1 _SB_MAKEMASK(3, 0) /* ignored */ +#define M_DUART_MODE_RESERVED1 _SB_MAKEMASK(3, 0) /* ignored */ -#define M_DUART_STOP_BIT_LEN_2 _SB_MAKEMASK1(3) -#define M_DUART_STOP_BIT_LEN_1 0 +#define M_DUART_STOP_BIT_LEN_2 _SB_MAKEMASK1(3) +#define M_DUART_STOP_BIT_LEN_1 0 -#define M_DUART_TX_CTS_ENA _SB_MAKEMASK1(4) +#define M_DUART_TX_CTS_ENA _SB_MAKEMASK1(4) -#define M_DUART_MODE_RESERVED2 _SB_MAKEMASK1(5) /* must be zero */ +#define M_DUART_MODE_RESERVED2 _SB_MAKEMASK1(5) /* must be zero */ #define S_DUART_CHAN_MODE 6 -#define M_DUART_CHAN_MODE _SB_MAKEMASK(2, S_DUART_CHAN_MODE) +#define M_DUART_CHAN_MODE _SB_MAKEMASK(2, S_DUART_CHAN_MODE) #define V_DUART_CHAN_MODE(x) _SB_MAKEVALUE(x, S_DUART_CHAN_MODE) #define K_DUART_CHAN_MODE_NORMAL 0 @@ -117,34 +117,34 @@ * Register: DUART_CMD_B */ -#define M_DUART_RX_EN _SB_MAKEMASK1(0) -#define M_DUART_RX_DIS _SB_MAKEMASK1(1) -#define M_DUART_TX_EN _SB_MAKEMASK1(2) -#define M_DUART_TX_DIS _SB_MAKEMASK1(3) +#define M_DUART_RX_EN _SB_MAKEMASK1(0) +#define M_DUART_RX_DIS _SB_MAKEMASK1(1) +#define M_DUART_TX_EN _SB_MAKEMASK1(2) +#define M_DUART_TX_DIS _SB_MAKEMASK1(3) #define S_DUART_MISC_CMD 4 -#define M_DUART_MISC_CMD _SB_MAKEMASK(3, S_DUART_MISC_CMD) -#define V_DUART_MISC_CMD(x) _SB_MAKEVALUE(x, S_DUART_MISC_CMD) - -#define K_DUART_MISC_CMD_NOACTION0 0 -#define K_DUART_MISC_CMD_NOACTION1 1 -#define K_DUART_MISC_CMD_RESET_RX 2 -#define K_DUART_MISC_CMD_RESET_TX 3 -#define K_DUART_MISC_CMD_NOACTION4 4 +#define M_DUART_MISC_CMD _SB_MAKEMASK(3, S_DUART_MISC_CMD) +#define V_DUART_MISC_CMD(x) _SB_MAKEVALUE(x, S_DUART_MISC_CMD) + +#define K_DUART_MISC_CMD_NOACTION0 0 +#define K_DUART_MISC_CMD_NOACTION1 1 +#define K_DUART_MISC_CMD_RESET_RX 2 +#define K_DUART_MISC_CMD_RESET_TX 3 +#define K_DUART_MISC_CMD_NOACTION4 4 #define K_DUART_MISC_CMD_RESET_BREAK_INT 5 -#define K_DUART_MISC_CMD_START_BREAK 6 -#define K_DUART_MISC_CMD_STOP_BREAK 7 - -#define V_DUART_MISC_CMD_NOACTION0 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0) -#define V_DUART_MISC_CMD_NOACTION1 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1) -#define V_DUART_MISC_CMD_RESET_RX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX) -#define V_DUART_MISC_CMD_RESET_TX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX) -#define V_DUART_MISC_CMD_NOACTION4 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4) +#define K_DUART_MISC_CMD_START_BREAK 6 +#define K_DUART_MISC_CMD_STOP_BREAK 7 + +#define V_DUART_MISC_CMD_NOACTION0 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0) +#define V_DUART_MISC_CMD_NOACTION1 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1) +#define V_DUART_MISC_CMD_RESET_RX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX) +#define V_DUART_MISC_CMD_RESET_TX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX) +#define V_DUART_MISC_CMD_NOACTION4 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4) #define V_DUART_MISC_CMD_RESET_BREAK_INT V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_BREAK_INT) -#define V_DUART_MISC_CMD_START_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK) -#define V_DUART_MISC_CMD_STOP_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK) +#define V_DUART_MISC_CMD_START_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK) +#define V_DUART_MISC_CMD_STOP_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK) -#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7) +#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7) /* * DUART Status Register (Table 10-6) @@ -153,14 +153,14 @@ * READ-ONLY */ -#define M_DUART_RX_RDY _SB_MAKEMASK1(0) -#define M_DUART_RX_FFUL _SB_MAKEMASK1(1) -#define M_DUART_TX_RDY _SB_MAKEMASK1(2) -#define M_DUART_TX_EMT _SB_MAKEMASK1(3) -#define M_DUART_OVRUN_ERR _SB_MAKEMASK1(4) -#define M_DUART_PARITY_ERR _SB_MAKEMASK1(5) -#define M_DUART_FRM_ERR _SB_MAKEMASK1(6) -#define M_DUART_RCVD_BRK _SB_MAKEMASK1(7) +#define M_DUART_RX_RDY _SB_MAKEMASK1(0) +#define M_DUART_RX_FFUL _SB_MAKEMASK1(1) +#define M_DUART_TX_RDY _SB_MAKEMASK1(2) +#define M_DUART_TX_EMT _SB_MAKEMASK1(3) +#define M_DUART_OVRUN_ERR _SB_MAKEMASK1(4) +#define M_DUART_PARITY_ERR _SB_MAKEMASK1(5) +#define M_DUART_FRM_ERR _SB_MAKEMASK1(6) +#define M_DUART_RCVD_BRK _SB_MAKEMASK1(7) /* * DUART Baud Rate Register (Table 10-7) @@ -168,8 +168,8 @@ * Register: DUART_CLK_SEL_B */ -#define M_DUART_CLK_COUNTER _SB_MAKEMASK(12, 0) -#define V_DUART_BAUD_RATE(x) (100000000/((x)*20)-1) +#define M_DUART_CLK_COUNTER _SB_MAKEMASK(12, 0) +#define V_DUART_BAUD_RATE(x) (100000000/((x)*20)-1) /* * DUART Data Registers (Table 10-8 and 10-9) @@ -179,33 +179,33 @@ * Register: DUART_TX_HOLD_B */ -#define M_DUART_RX_DATA _SB_MAKEMASK(8, 0) -#define M_DUART_TX_DATA _SB_MAKEMASK(8, 0) +#define M_DUART_RX_DATA _SB_MAKEMASK(8, 0) +#define M_DUART_TX_DATA _SB_MAKEMASK(8, 0) /* * DUART Input Port Register (Table 10-10) * Register: DUART_IN_PORT */ -#define M_DUART_IN_PIN0_VAL _SB_MAKEMASK1(0) -#define M_DUART_IN_PIN1_VAL _SB_MAKEMASK1(1) -#define M_DUART_IN_PIN2_VAL _SB_MAKEMASK1(2) -#define M_DUART_IN_PIN3_VAL _SB_MAKEMASK1(3) -#define M_DUART_IN_PIN4_VAL _SB_MAKEMASK1(4) -#define M_DUART_IN_PIN5_VAL _SB_MAKEMASK1(5) -#define M_DUART_RIN0_PIN _SB_MAKEMASK1(6) -#define M_DUART_RIN1_PIN _SB_MAKEMASK1(7) +#define M_DUART_IN_PIN0_VAL _SB_MAKEMASK1(0) +#define M_DUART_IN_PIN1_VAL _SB_MAKEMASK1(1) +#define M_DUART_IN_PIN2_VAL _SB_MAKEMASK1(2) +#define M_DUART_IN_PIN3_VAL _SB_MAKEMASK1(3) +#define M_DUART_IN_PIN4_VAL _SB_MAKEMASK1(4) +#define M_DUART_IN_PIN5_VAL _SB_MAKEMASK1(5) +#define M_DUART_RIN0_PIN _SB_MAKEMASK1(6) +#define M_DUART_RIN1_PIN _SB_MAKEMASK1(7) /* * DUART Input Port Change Status Register (Tables 10-11, 10-12, and 10-13) * Register: DUART_INPORT_CHNG */ -#define S_DUART_IN_PIN_VAL 0 -#define M_DUART_IN_PIN_VAL _SB_MAKEMASK(4, S_DUART_IN_PIN_VAL) +#define S_DUART_IN_PIN_VAL 0 +#define M_DUART_IN_PIN_VAL _SB_MAKEMASK(4, S_DUART_IN_PIN_VAL) -#define S_DUART_IN_PIN_CHNG 4 -#define M_DUART_IN_PIN_CHNG _SB_MAKEMASK(4, S_DUART_IN_PIN_CHNG) +#define S_DUART_IN_PIN_CHNG 4 +#define M_DUART_IN_PIN_CHNG _SB_MAKEMASK(4, S_DUART_IN_PIN_CHNG) /* @@ -213,46 +213,46 @@ * Register: DUART_OPCR */ -#define M_DUART_OPCR_RESERVED0 _SB_MAKEMASK1(0) /* must be zero */ -#define M_DUART_OPC2_SEL _SB_MAKEMASK1(1) -#define M_DUART_OPCR_RESERVED1 _SB_MAKEMASK1(2) /* must be zero */ -#define M_DUART_OPC3_SEL _SB_MAKEMASK1(3) -#define M_DUART_OPCR_RESERVED2 _SB_MAKEMASK(4, 4) /* must be zero */ +#define M_DUART_OPCR_RESERVED0 _SB_MAKEMASK1(0) /* must be zero */ +#define M_DUART_OPC2_SEL _SB_MAKEMASK1(1) +#define M_DUART_OPCR_RESERVED1 _SB_MAKEMASK1(2) /* must be zero */ +#define M_DUART_OPC3_SEL _SB_MAKEMASK1(3) +#define M_DUART_OPCR_RESERVED2 _SB_MAKEMASK(4, 4) /* must be zero */ /* * DUART Aux Control Register (Table 10-15) * Register: DUART_AUX_CTRL */ -#define M_DUART_IP0_CHNG_ENA _SB_MAKEMASK1(0) -#define M_DUART_IP1_CHNG_ENA _SB_MAKEMASK1(1) -#define M_DUART_IP2_CHNG_ENA _SB_MAKEMASK1(2) -#define M_DUART_IP3_CHNG_ENA _SB_MAKEMASK1(3) -#define M_DUART_ACR_RESERVED _SB_MAKEMASK(4, 4) +#define M_DUART_IP0_CHNG_ENA _SB_MAKEMASK1(0) +#define M_DUART_IP1_CHNG_ENA _SB_MAKEMASK1(1) +#define M_DUART_IP2_CHNG_ENA _SB_MAKEMASK1(2) +#define M_DUART_IP3_CHNG_ENA _SB_MAKEMASK1(3) +#define M_DUART_ACR_RESERVED _SB_MAKEMASK(4, 4) -#define M_DUART_CTS_CHNG_ENA _SB_MAKEMASK1(0) -#define M_DUART_CIN_CHNG_ENA _SB_MAKEMASK1(2) +#define M_DUART_CTS_CHNG_ENA _SB_MAKEMASK1(0) +#define M_DUART_CIN_CHNG_ENA _SB_MAKEMASK1(2) /* * DUART Interrupt Status Register (Table 10-16) * Register: DUART_ISR */ -#define M_DUART_ISR_TX_A _SB_MAKEMASK1(0) +#define M_DUART_ISR_TX_A _SB_MAKEMASK1(0) -#define S_DUART_ISR_RX_A 1 -#define M_DUART_ISR_RX_A _SB_MAKEMASK1(S_DUART_ISR_RX_A) -#define V_DUART_ISR_RX_A(x) _SB_MAKEVALUE(x, S_DUART_ISR_RX_A) -#define G_DUART_ISR_RX_A(x) _SB_GETVALUE(x, S_DUART_ISR_RX_A, M_DUART_ISR_RX_A) +#define S_DUART_ISR_RX_A 1 +#define M_DUART_ISR_RX_A _SB_MAKEMASK1(S_DUART_ISR_RX_A) +#define V_DUART_ISR_RX_A(x) _SB_MAKEVALUE(x, S_DUART_ISR_RX_A) +#define G_DUART_ISR_RX_A(x) _SB_GETVALUE(x, S_DUART_ISR_RX_A, M_DUART_ISR_RX_A) -#define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2) -#define M_DUART_ISR_IN_A _SB_MAKEMASK1(3) +#define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2) +#define M_DUART_ISR_IN_A _SB_MAKEMASK1(3) #define M_DUART_ISR_ALL_A _SB_MAKEMASK(4, 0) -#define M_DUART_ISR_TX_B _SB_MAKEMASK1(4) -#define M_DUART_ISR_RX_B _SB_MAKEMASK1(5) -#define M_DUART_ISR_BRK_B _SB_MAKEMASK1(6) -#define M_DUART_ISR_IN_B _SB_MAKEMASK1(7) +#define M_DUART_ISR_TX_B _SB_MAKEMASK1(4) +#define M_DUART_ISR_RX_B _SB_MAKEMASK1(5) +#define M_DUART_ISR_BRK_B _SB_MAKEMASK1(6) +#define M_DUART_ISR_IN_B _SB_MAKEMASK1(7) #define M_DUART_ISR_ALL_B _SB_MAKEMASK(4, 4) /* @@ -262,29 +262,29 @@ * Register: DUART_ISR_B */ -#define M_DUART_ISR_TX _SB_MAKEMASK1(0) -#define M_DUART_ISR_RX _SB_MAKEMASK1(1) -#define M_DUART_ISR_BRK _SB_MAKEMASK1(2) -#define M_DUART_ISR_IN _SB_MAKEMASK1(3) +#define M_DUART_ISR_TX _SB_MAKEMASK1(0) +#define M_DUART_ISR_RX _SB_MAKEMASK1(1) +#define M_DUART_ISR_BRK _SB_MAKEMASK1(2) +#define M_DUART_ISR_IN _SB_MAKEMASK1(3) #define M_DUART_ISR_ALL _SB_MAKEMASK(4, 0) -#define M_DUART_ISR_RESERVED _SB_MAKEMASK(4, 4) +#define M_DUART_ISR_RESERVED _SB_MAKEMASK(4, 4) /* * DUART Interrupt Mask Register (Table 10-19) * Register: DUART_IMR */ -#define M_DUART_IMR_TX_A _SB_MAKEMASK1(0) -#define M_DUART_IMR_RX_A _SB_MAKEMASK1(1) -#define M_DUART_IMR_BRK_A _SB_MAKEMASK1(2) -#define M_DUART_IMR_IN_A _SB_MAKEMASK1(3) +#define M_DUART_IMR_TX_A _SB_MAKEMASK1(0) +#define M_DUART_IMR_RX_A _SB_MAKEMASK1(1) +#define M_DUART_IMR_BRK_A _SB_MAKEMASK1(2) +#define M_DUART_IMR_IN_A _SB_MAKEMASK1(3) #define M_DUART_IMR_ALL_A _SB_MAKEMASK(4, 0) -#define M_DUART_IMR_TX_B _SB_MAKEMASK1(4) -#define M_DUART_IMR_RX_B _SB_MAKEMASK1(5) -#define M_DUART_IMR_BRK_B _SB_MAKEMASK1(6) -#define M_DUART_IMR_IN_B _SB_MAKEMASK1(7) -#define M_DUART_IMR_ALL_B _SB_MAKEMASK(4, 4) +#define M_DUART_IMR_TX_B _SB_MAKEMASK1(4) +#define M_DUART_IMR_RX_B _SB_MAKEMASK1(5) +#define M_DUART_IMR_BRK_B _SB_MAKEMASK1(6) +#define M_DUART_IMR_IN_B _SB_MAKEMASK1(7) +#define M_DUART_IMR_ALL_B _SB_MAKEMASK(4, 4) /* * DUART Channel A Interrupt Mask Register (Table 10-20) @@ -293,12 +293,12 @@ * Register: DUART_IMR_B */ -#define M_DUART_IMR_TX _SB_MAKEMASK1(0) -#define M_DUART_IMR_RX _SB_MAKEMASK1(1) -#define M_DUART_IMR_BRK _SB_MAKEMASK1(2) -#define M_DUART_IMR_IN _SB_MAKEMASK1(3) +#define M_DUART_IMR_TX _SB_MAKEMASK1(0) +#define M_DUART_IMR_RX _SB_MAKEMASK1(1) +#define M_DUART_IMR_BRK _SB_MAKEMASK1(2) +#define M_DUART_IMR_IN _SB_MAKEMASK1(3) #define M_DUART_IMR_ALL _SB_MAKEMASK(4, 0) -#define M_DUART_IMR_RESERVED _SB_MAKEMASK(4, 4) +#define M_DUART_IMR_RESERVED _SB_MAKEMASK(4, 4) /* @@ -306,33 +306,33 @@ * Register: DUART_SET_OPR */ -#define M_DUART_SET_OPR0 _SB_MAKEMASK1(0) -#define M_DUART_SET_OPR1 _SB_MAKEMASK1(1) -#define M_DUART_SET_OPR2 _SB_MAKEMASK1(2) -#define M_DUART_SET_OPR3 _SB_MAKEMASK1(3) -#define M_DUART_OPSR_RESERVED _SB_MAKEMASK(4, 4) +#define M_DUART_SET_OPR0 _SB_MAKEMASK1(0) +#define M_DUART_SET_OPR1 _SB_MAKEMASK1(1) +#define M_DUART_SET_OPR2 _SB_MAKEMASK1(2) +#define M_DUART_SET_OPR3 _SB_MAKEMASK1(3) +#define M_DUART_OPSR_RESERVED _SB_MAKEMASK(4, 4) /* * DUART Output Port Clear Register (Table 10-23) * Register: DUART_CLEAR_OPR */ -#define M_DUART_CLR_OPR0 _SB_MAKEMASK1(0) -#define M_DUART_CLR_OPR1 _SB_MAKEMASK1(1) -#define M_DUART_CLR_OPR2 _SB_MAKEMASK1(2) -#define M_DUART_CLR_OPR3 _SB_MAKEMASK1(3) -#define M_DUART_OPCR_RESERVED _SB_MAKEMASK(4, 4) +#define M_DUART_CLR_OPR0 _SB_MAKEMASK1(0) +#define M_DUART_CLR_OPR1 _SB_MAKEMASK1(1) +#define M_DUART_CLR_OPR2 _SB_MAKEMASK1(2) +#define M_DUART_CLR_OPR3 _SB_MAKEMASK1(3) +#define M_DUART_OPCR_RESERVED _SB_MAKEMASK(4, 4) /* * DUART Output Port RTS Register (Table 10-24) * Register: DUART_OUT_PORT */ -#define M_DUART_OUT_PIN_SET0 _SB_MAKEMASK1(0) -#define M_DUART_OUT_PIN_SET1 _SB_MAKEMASK1(1) -#define M_DUART_OUT_PIN_CLR0 _SB_MAKEMASK1(2) -#define M_DUART_OUT_PIN_CLR1 _SB_MAKEMASK1(3) -#define M_DUART_OPRR_RESERVED _SB_MAKEMASK(4, 4) +#define M_DUART_OUT_PIN_SET0 _SB_MAKEMASK1(0) +#define M_DUART_OUT_PIN_SET1 _SB_MAKEMASK1(1) +#define M_DUART_OUT_PIN_CLR0 _SB_MAKEMASK1(2) +#define M_DUART_OUT_PIN_CLR1 _SB_MAKEMASK1(3) +#define M_DUART_OPRR_RESERVED _SB_MAKEMASK(4, 4) #define M_DUART_OUT_PIN_SET(chan) \ (chan == 0 ? M_DUART_OUT_PIN_SET0 : M_DUART_OUT_PIN_SET1) @@ -344,15 +344,15 @@ * Full Interrupt Control Register */ -#define S_DUART_SIG_FULL _SB_MAKE64(0) -#define M_DUART_SIG_FULL _SB_MAKEMASK(4, S_DUART_SIG_FULL) -#define V_DUART_SIG_FULL(x) _SB_MAKEVALUE(x, S_DUART_SIG_FULL) -#define G_DUART_SIG_FULL(x) _SB_GETVALUE(x, S_DUART_SIG_FULL, M_DUART_SIG_FULL) +#define S_DUART_SIG_FULL _SB_MAKE64(0) +#define M_DUART_SIG_FULL _SB_MAKEMASK(4, S_DUART_SIG_FULL) +#define V_DUART_SIG_FULL(x) _SB_MAKEVALUE(x, S_DUART_SIG_FULL) +#define G_DUART_SIG_FULL(x) _SB_GETVALUE(x, S_DUART_SIG_FULL, M_DUART_SIG_FULL) -#define S_DUART_INT_TIME _SB_MAKE64(4) -#define M_DUART_INT_TIME _SB_MAKEMASK(4, S_DUART_INT_TIME) -#define V_DUART_INT_TIME(x) _SB_MAKEVALUE(x, S_DUART_INT_TIME) -#define G_DUART_INT_TIME(x) _SB_GETVALUE(x, S_DUART_INT_TIME, M_DUART_INT_TIME) +#define S_DUART_INT_TIME _SB_MAKE64(4) +#define M_DUART_INT_TIME _SB_MAKEMASK(4, S_DUART_INT_TIME) +#define V_DUART_INT_TIME(x) _SB_MAKEVALUE(x, S_DUART_INT_TIME) +#define G_DUART_INT_TIME(x) _SB_GETVALUE(x, S_DUART_INT_TIME, M_DUART_INT_TIME) #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ diff --git a/arch/mips/include/asm/sibyte/sentosa.h b/arch/mips/include/asm/sibyte/sentosa.h index 64c4787..0351a46 100644 --- a/arch/mips/include/asm/sibyte/sentosa.h +++ b/arch/mips/include/asm/sibyte/sentosa.h @@ -30,11 +30,11 @@ /* Generic bus chip selects */ #ifdef CONFIG_SIBYTE_RHONE -#define LEDS_CS 6 -#define LEDS_PHYS 0x1d0a0000 +#define LEDS_CS 6 +#define LEDS_PHYS 0x1d0a0000 #endif /* GPIOs */ -#define K_GPIO_DBG_LED 0 +#define K_GPIO_DBG_LED 0 #endif /* __ASM_SIBYTE_SENTOSA_H */ diff --git a/arch/mips/include/asm/sibyte/swarm.h b/arch/mips/include/asm/sibyte/swarm.h index 114d9d2..187cfb1 100644 --- a/arch/mips/include/asm/sibyte/swarm.h +++ b/arch/mips/include/asm/sibyte/swarm.h @@ -24,41 +24,41 @@ #ifdef CONFIG_SIBYTE_SWARM #define SIBYTE_BOARD_NAME "BCM91250A (SWARM)" #define SIBYTE_HAVE_PCMCIA 1 -#define SIBYTE_HAVE_IDE 1 +#define SIBYTE_HAVE_IDE 1 #endif #ifdef CONFIG_SIBYTE_LITTLESUR #define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)" #define SIBYTE_HAVE_PCMCIA 0 -#define SIBYTE_HAVE_IDE 1 +#define SIBYTE_HAVE_IDE 1 #define SIBYTE_DEFAULT_CONSOLE "cfe0" #endif #ifdef CONFIG_SIBYTE_CRHONE #define SIBYTE_BOARD_NAME "BCM91125C (CRhone)" #define SIBYTE_HAVE_PCMCIA 0 -#define SIBYTE_HAVE_IDE 0 +#define SIBYTE_HAVE_IDE 0 #endif #ifdef CONFIG_SIBYTE_CRHINE #define SIBYTE_BOARD_NAME "BCM91120C (CRhine)" #define SIBYTE_HAVE_PCMCIA 0 -#define SIBYTE_HAVE_IDE 0 +#define SIBYTE_HAVE_IDE 0 #endif /* Generic bus chip selects */ -#define LEDS_CS 3 -#define LEDS_PHYS 0x100a0000 +#define LEDS_CS 3 +#define LEDS_PHYS 0x100a0000 #ifdef SIBYTE_HAVE_IDE -#define IDE_CS 4 -#define IDE_PHYS 0x100b0000 -#define K_GPIO_GB_IDE 4 -#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) +#define IDE_CS 4 +#define IDE_PHYS 0x100b0000 +#define K_GPIO_GB_IDE 4 +#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE) #endif #ifdef SIBYTE_HAVE_PCMCIA -#define PCMCIA_CS 6 -#define PCMCIA_PHYS 0x11000000 +#define PCMCIA_CS 6 +#define PCMCIA_PHYS 0x11000000 #define K_GPIO_PC_READY 9 -#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY) +#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY) #endif #endif /* __ASM_SIBYTE_SWARM_H */ diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index f33b5fd..eb60087 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -26,7 +26,7 @@ extern cpumask_t cpu_sibling_map[]; #define raw_smp_processor_id() (current_thread_info()->cpu) /* Map from cpu id to sequential logical cpu number. This will only - not be idempotent when cpus failed to come on-line. */ + not be idempotent when cpus failed to come on-line. */ extern int __cpu_number_map[NR_CPUS]; #define cpu_number_map(cpu) __cpu_number_map[cpu] @@ -36,7 +36,7 @@ extern int __cpu_logical_map[NR_CPUS]; #define NO_PROC_ID (-1) -#define SMP_RESCHEDULE_YOURSELF 0x1 /* XXX braindead */ +#define SMP_RESCHEDULE_YOURSELF 0x1 /* XXX braindead */ #define SMP_CALL_FUNCTION 0x2 /* Octeon - Tell another core to flush its icache */ #define SMP_ICACHE_FLUSH 0x4 @@ -62,14 +62,14 @@ static inline void smp_send_reschedule(int cpu) #ifdef CONFIG_HOTPLUG_CPU static inline int __cpu_disable(void) { - extern struct plat_smp_ops *mp_ops; /* private */ + extern struct plat_smp_ops *mp_ops; /* private */ return mp_ops->cpu_disable(); } static inline void __cpu_die(unsigned int cpu) { - extern struct plat_smp_ops *mp_ops; /* private */ + extern struct plat_smp_ops *mp_ops; /* private */ mp_ops->cpu_die(cpu); } @@ -81,14 +81,14 @@ extern asmlinkage void smp_call_function_interrupt(void); static inline void arch_send_call_function_single_ipi(int cpu) { - extern struct plat_smp_ops *mp_ops; /* private */ + extern struct plat_smp_ops *mp_ops; /* private */ mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION); } static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask) { - extern struct plat_smp_ops *mp_ops; /* private */ + extern struct plat_smp_ops *mp_ops; /* private */ mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION); } diff --git a/arch/mips/include/asm/smtc.h b/arch/mips/include/asm/smtc.h index 8935426..e56b439 100644 --- a/arch/mips/include/asm/smtc.h +++ b/arch/mips/include/asm/smtc.h @@ -14,8 +14,8 @@ extern unsigned int smtc_status; -#define SMTC_TLB_SHARED 0x00000001 -#define SMTC_MTC_ACTIVE 0x00000002 +#define SMTC_TLB_SHARED 0x00000001 +#define SMTC_MTC_ACTIVE 0x00000002 /* * TLB/ASID Management information diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h index 2367b56..66814f8 100644 --- a/arch/mips/include/asm/sn/addrs.h +++ b/arch/mips/include/asm/sn/addrs.h @@ -88,8 +88,8 @@ #define SWIN_SIZE_BITS 24 #define SWIN_SIZE (UINT64_CAST 1 << 24) -#define SWIN_SIZEMASK (SWIN_SIZE - 1) -#define SWIN_WIDGET_MASK 0xF +#define SWIN_SIZEMASK (SWIN_SIZE - 1) +#define SWIN_WIDGET_MASK 0xF /* * Convert smallwindow address to xtalk address. @@ -97,8 +97,8 @@ * 'addr' can be physical or virtual address, but will be converted * to Xtalk address in the range 0 -> SWINZ_SIZEMASK */ -#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK) -#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) +#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK) +#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) /* * Verify if addr belongs to small window address on node with "nasid" * @@ -108,7 +108,7 @@ * * */ -#define NODE_SWIN_ADDR(nasid, addr) \ +#define NODE_SWIN_ADDR(nasid, addr) \ (((addr) >= NODE_SWIN_BASE(nasid, 0)) && \ ((addr) < (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\ )) @@ -150,7 +150,7 @@ #endif -#define HUB_REGISTER_WIDGET 1 +#define HUB_REGISTER_WIDGET 1 #define IALIAS_BASE NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET) #define IALIAS_SIZE 0x800000 /* 8 Megabytes */ #define IS_IALIAS(_a) (((_a) >= IALIAS_BASE) && \ @@ -174,16 +174,16 @@ * WARNING: They won't work in assembler. * * BDDIR_ENTRY_LO returns the address of the low double-word of the dir - * entry corresponding to a physical (Cac or Uncac) address. + * entry corresponding to a physical (Cac or Uncac) address. * BDDIR_ENTRY_HI returns the address of the high double-word of the entry. * BDPRT_ENTRY returns the address of the double-word protection entry - * corresponding to the page containing the physical address. + * corresponding to the page containing the physical address. * BDPRT_ENTRY_S Stores the value into the protection entry. * BDPRT_ENTRY_L Load the value from the protection entry. * BDECC_ENTRY returns the address of the ECC byte corresponding to a - * double-word at a specified physical address. + * double-word at a specified physical address. * BDECC_ENTRY_H returns the address of the two ECC bytes corresponding to a - * quad-word at a specified physical address. + * quad-word at a specified physical address. */ #define NODE_BDOOR_BASE(_n) (NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2)) @@ -226,11 +226,11 @@ #define BDADDR_IS_DIR(_ba) ((UINT64_CAST (_ba) & 0x200) != 0) #define BDADDR_IS_PRT(_ba) ((UINT64_CAST (_ba) & 0x200) == 0) -#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ +#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2 | \ (UINT64_CAST(_ba) & 0x1f << 4) << 3) -#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ +#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2) #define BDECC_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \ @@ -251,23 +251,23 @@ /* * WARNING: * When certain Hub chip workaround are defined, it's not sufficient - * to dereference the *_HUB_ADDR() macros. You should instead use + * to dereference the *_HUB_ADDR() macros. You should instead use * HUB_L() and HUB_S() if you must deal with pointers to hub registers. * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). * They're always safe. */ #define LOCAL_HUB_ADDR(_x) (HUBREG_CAST (IALIAS_BASE + (_x))) -#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ +#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ 0x800000 + (_x))) #ifdef CONFIG_SGI_IP27 -#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ +#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ 0x800000 + (_x))) #endif /* CONFIG_SGI_IP27 */ #ifndef __ASSEMBLY__ #define HUB_L(_a) *(_a) -#define HUB_S(_a, _d) *(_a) = (_d) +#define HUB_S(_a, _d) *(_a) = (_d) #define LOCAL_HUB_L(_r) HUB_L(LOCAL_HUB_ADDR(_r)) #define LOCAL_HUB_S(_r, _d) HUB_S(LOCAL_HUB_ADDR(_r), (_d)) @@ -330,14 +330,14 @@ #define KLI_LAUNCH 0 /* Dir. entries */ #define KLI_KLCONFIG 1 -#define KLI_NMI 2 +#define KLI_NMI 2 #define KLI_GDA 3 #define KLI_FREEMEM 4 -#define KLI_SYMMON_STK 5 +#define KLI_SYMMON_STK 5 #define KLI_PI_ERROR 6 #define KLI_KERN_VARS 7 -#define KLI_KERN_XP 8 -#define KLI_KERN_PARTID 9 +#define KLI_KERN_XP 8 +#define KLI_KERN_PARTID 9 #ifndef __ASSEMBLY__ @@ -350,8 +350,8 @@ #define KLD_SYMMON_STK(nasid) (KLD_BASE(nasid) + KLI_SYMMON_STK) #define KLD_FREEMEM(nasid) (KLD_BASE(nasid) + KLI_FREEMEM) #define KLD_KERN_VARS(nasid) (KLD_BASE(nasid) + KLI_KERN_VARS) -#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP) -#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID) +#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP) +#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID) #define LAUNCH_OFFSET(nasid, slice) \ (KLD_LAUNCH(nasid)->offset + \ @@ -365,7 +365,7 @@ KLD_NMI(nasid)->stride * (slice)) #define NMI_ADDR(nasid, slice) \ TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice)) -#define NMI_SIZE(nasid) KLD_NMI(nasid)->size +#define NMI_SIZE(nasid) KLD_NMI(nasid)->size #define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset #define KLCONFIG_ADDR(nasid) \ @@ -390,8 +390,8 @@ /* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a * relocatable program */ -#define UNIX_DEBUG_LOADADDR 0x300000 -#define SYMMON_LOADADDR(nasid) \ +#define UNIX_DEBUG_LOADADDR 0x300000 +#define SYMMON_LOADADDR(nasid) \ TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000)) #define FREEMEM_OFFSET(nasid) KLD_FREEMEM(nasid)->offset @@ -420,8 +420,8 @@ #define KERN_VARS_ADDR(nasid) KLD_KERN_VARS(nasid)->pointer #define KERN_VARS_SIZE(nasid) KLD_KERN_VARS(nasid)->size -#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer -#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size +#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer +#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size #define GPDA_ADDR(nasid) TO_NODE_CAC(nasid, GPDA_OFFSET) diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h index dc81114..e33d092 100644 --- a/arch/mips/include/asm/sn/agent.h +++ b/arch/mips/include/asm/sn/agent.h @@ -25,21 +25,21 @@ */ #if defined(CONFIG_SGI_IP27) -#define HUB_NIC_ADDR(_cpuid) \ - REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)), \ +#define HUB_NIC_ADDR(_cpuid) \ + REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)), \ MD_MLAN_CTL) #endif -#define SET_HUB_NIC(_my_cpuid, _val) \ +#define SET_HUB_NIC(_my_cpuid, _val) \ (HUB_S(HUB_NIC_ADDR(_my_cpuid), (_val))) -#define SET_MY_HUB_NIC(_v) \ +#define SET_MY_HUB_NIC(_v) \ SET_HUB_NIC(cpuid(), (_v)) -#define GET_HUB_NIC(_my_cpuid) \ +#define GET_HUB_NIC(_my_cpuid) \ (HUB_L(HUB_NIC_ADDR(_my_cpuid))) -#define GET_MY_HUB_NIC() \ +#define GET_MY_HUB_NIC() \ GET_HUB_NIC(cpuid()) #endif /* _ASM_SGI_SN_AGENT_H */ diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h index bd75945..471e687 100644 --- a/arch/mips/include/asm/sn/arch.h +++ b/arch/mips/include/asm/sn/arch.h @@ -28,14 +28,14 @@ typedef u64 hubreg_t; #define INVALID_CNODEID (cnodeid_t)-1 #define INVALID_PNODEID (pnodeid_t)-1 #define INVALID_MODULE (moduleid_t)-1 -#define INVALID_PARTID (partid_t)-1 +#define INVALID_PARTID (partid_t)-1 extern nasid_t get_nasid(void); extern cnodeid_t get_cpu_cnode(cpuid_t); extern int get_cpu_slice(cpuid_t); /* - * NO ONE should access these arrays directly. The only reason we refer to + * NO ONE should access these arrays directly. The only reason we refer to * them here is to avoid the procedure call that would be required in the * macros below. (Really want private data members here :-) */ @@ -44,12 +44,12 @@ extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; /* * These macros are used by various parts of the kernel to convert - * between the three different kinds of node numbering. At least some + * between the three different kinds of node numbering. At least some * of them may change to procedure calls in the future, but the macros * will continue to work. Don't use the arrays above directly. */ -#define NASID_TO_REGION(nnode) \ +#define NASID_TO_REGION(nnode) \ ((nnode) >> \ (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT)) diff --git a/arch/mips/include/asm/sn/fru.h b/arch/mips/include/asm/sn/fru.h index b3e3606..bbb8325 100644 --- a/arch/mips/include/asm/sn/fru.h +++ b/arch/mips/include/asm/sn/fru.h @@ -21,24 +21,24 @@ typedef struct kf_mem_s { * is this necessary ? */ confidence_t km_dimm[MAX_DIMMS]; - /* confidence level that dimm[i] is bad + /* confidence level that dimm[i] is bad *I think this is the right number */ } kf_mem_t; typedef struct kf_cpu_s { - confidence_t kc_confidence; /* confidence level that cpu is bad */ - confidence_t kc_icache; /* confidence level that instr. cache is bad */ - confidence_t kc_dcache; /* confidence level that data cache is bad */ - confidence_t kc_scache; /* confidence level that sec. cache is bad */ + confidence_t kc_confidence; /* confidence level that cpu is bad */ + confidence_t kc_icache; /* confidence level that instr. cache is bad */ + confidence_t kc_dcache; /* confidence level that data cache is bad */ + confidence_t kc_scache; /* confidence level that sec. cache is bad */ confidence_t kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */ } kf_cpu_t; typedef struct kf_pci_bus_s { confidence_t kpb_belief; /* confidence level that the pci bus is bad */ confidence_t kpb_pcidev_belief[MAX_PCIDEV]; - /* confidence level that the pci dev is bad */ + /* confidence level that the pci dev is bad */ } kf_pci_bus_t; #endif /* __ASM_SN_FRU_H */ diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h index 9cb6ff7..85fa1b5 100644 --- a/arch/mips/include/asm/sn/gda.h +++ b/arch/mips/include/asm/sn/gda.h @@ -8,7 +8,7 @@ * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc. * * gda.h -- Contains the data structure for the global data area, - * The GDA contains information communicated between the + * The GDA contains information communicated between the * PROM, SYMMON, and the kernel. */ #ifndef _ASM_SN_GDA_H @@ -23,8 +23,8 @@ * * Version # | Change * -------------+------------------------------------------------------- - * 1 | Initial SN0 version - * 2 | Prom sets g_partid field to the partition number. 0 IS + * 1 | Initial SN0 version + * 2 | Prom sets g_partid field to the partition number. 0 IS * | a valid partition #. */ @@ -60,7 +60,7 @@ typedef struct gda { /* Pointer to a mask of nodes with copies * of the kernel. */ char g_padding[56]; /* pad out to 128 bytes */ - nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node, + nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node, * indexed by cnodeid. */ } gda_t; @@ -74,7 +74,7 @@ typedef struct gda { * revisions assume GDA is NOT set up, and read partition * information from the board info. */ -#define PART_GDA_VERSION 2 +#define PART_GDA_VERSION 2 /* * The following requests can be sent to the PROM during startup. @@ -83,17 +83,17 @@ typedef struct gda { #define PROMOP_MAGIC 0x0ead0000 #define PROMOP_MAGIC_MASK 0x0fff0000 -#define PROMOP_BIST_SHIFT 11 -#define PROMOP_BIST_MASK (0x3 << 11) +#define PROMOP_BIST_SHIFT 11 +#define PROMOP_BIST_MASK (0x3 << 11) #define PROMOP_REG PI_ERR_STACK_ADDR_A #define PROMOP_INVALID (PROMOP_MAGIC | 0x00) -#define PROMOP_HALT (PROMOP_MAGIC | 0x10) -#define PROMOP_POWERDOWN (PROMOP_MAGIC | 0x20) -#define PROMOP_RESTART (PROMOP_MAGIC | 0x30) -#define PROMOP_REBOOT (PROMOP_MAGIC | 0x40) -#define PROMOP_IMODE (PROMOP_MAGIC | 0x50) +#define PROMOP_HALT (PROMOP_MAGIC | 0x10) +#define PROMOP_POWERDOWN (PROMOP_MAGIC | 0x20) +#define PROMOP_RESTART (PROMOP_MAGIC | 0x30) +#define PROMOP_REBOOT (PROMOP_MAGIC | 0x40) +#define PROMOP_IMODE (PROMOP_MAGIC | 0x50) #define PROMOP_CMD_MASK 0x00f0 #define PROMOP_OPTIONS_MASK 0xfff0 diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h index 6718b64..fc13481 100644 --- a/arch/mips/include/asm/sn/intr.h +++ b/arch/mips/include/asm/sn/intr.h @@ -14,8 +14,8 @@ #define INT_PEND0_BASELVL 0 #define INT_PEND1_BASELVL 64 -#define N_INTPENDJUNK_BITS 8 -#define INTPENDJUNK_CLRBIT 0x80 +#define N_INTPENDJUNK_BITS 8 +#define INTPENDJUNK_CLRBIT 0x80 /* * Macros to manipulate the interrupt register on the calling hub chip. @@ -32,7 +32,7 @@ * We do an uncached load of the int_pend0 register to ensure this. */ -#define LOCAL_HUB_CLR_INTR(level) \ +#define LOCAL_HUB_CLR_INTR(level) \ do { \ LOCAL_HUB_S(PI_INT_PEND_MOD, (level)); \ LOCAL_HUB_L(PI_INT_PEND0); \ @@ -40,7 +40,7 @@ do { \ #define REMOTE_HUB_CLR_INTR(hub, level) \ do { \ - nasid_t __hub = (hub); \ + nasid_t __hub = (hub); \ \ REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level)); \ REMOTE_HUB_L(__hub, PI_INT_PEND0); \ @@ -102,8 +102,8 @@ do { \ #define LLP_PFAIL_INTR_A 41 /* see ml/SN/SN0/sysctlr.c */ #define LLP_PFAIL_INTR_B 42 -#define TLB_INTR_A 43 /* used for tlb flush random */ -#define TLB_INTR_B 44 +#define TLB_INTR_A 43 /* used for tlb flush random */ +#define TLB_INTR_B 44 #define IP27_INTR_0 45 /* Reserved for PROM use */ #define IP27_INTR_1 46 /* do not use in Kernel */ @@ -116,8 +116,8 @@ do { \ #define BRIDGE_ERROR_INTR 53 /* Setup by PROM to catch */ /* Bridge Errors */ -#define DEBUG_INTR_A 54 -#define DEBUG_INTR_B 55 /* Used by symmon to stop all cpus */ +#define DEBUG_INTR_A 54 +#define DEBUG_INTR_B 55 /* Used by symmon to stop all cpus */ #define IO_ERROR_INTR 57 /* Setup by PROM */ #define CLK_ERR_INTR 58 #define COR_ERR_INTR_A 59 diff --git a/arch/mips/include/asm/sn/io.h b/arch/mips/include/asm/sn/io.h index 24c6775..d5174d0 100644 --- a/arch/mips/include/asm/sn/io.h +++ b/arch/mips/include/asm/sn/io.h @@ -31,7 +31,7 @@ #define HUB_PIO_MAP_TO_MEM 0 #define HUB_PIO_MAP_TO_IO 1 -#define IIO_ITTE_INVALID_WIDGET 3 /* an invalid widget */ +#define IIO_ITTE_INVALID_WIDGET 3 /* an invalid widget */ #define IIO_ITTE_PUT(nasid, bigwin, io_or_mem, widget, addr) \ REMOTE_HUB_S((nasid), IIO_ITTE(bigwin), \ @@ -52,7 +52,7 @@ * value _x is expected to be a widget number in the range * 0, 8 - 0xF */ -#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ +#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ (_x) : \ (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) ) diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h index 0996777..e33f036 100644 --- a/arch/mips/include/asm/sn/ioc3.h +++ b/arch/mips/include/asm/sn/ioc3.h @@ -62,8 +62,8 @@ struct ioc3_sioregs { volatile u8 fill3[0x170 - 0x169 - 1]; - struct ioc3_uartregs uartb; /* 0x20170 */ - struct ioc3_uartregs uarta; /* 0x20178 */ + struct ioc3_uartregs uartb; /* 0x20170 */ + struct ioc3_uartregs uarta; /* 0x20178 */ }; /* Register layout of IOC3 in configuration space. */ @@ -106,7 +106,7 @@ struct ioc3 { volatile u32 ppbr_l_b; /* 0x00094 */ volatile u32 ppcr_b; /* 0x00098 */ - /* Keyboard and Mouse Registers */ + /* Keyboard and Mouse Registers */ volatile u32 km_csr; /* 0x0009c */ volatile u32 k_rd; /* 0x000a0 */ volatile u32 m_rd; /* 0x000a4 */ @@ -208,7 +208,7 @@ struct ioc3_erxbuf { /* * Ethernet TX Descriptor */ -#define ETXD_DATALEN 104 +#define ETXD_DATALEN 104 struct ioc3_etxd { u32 cmd; /* command field */ u32 bufcnt; /* buffer counts field */ diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h index fe02900..467c313 100644 --- a/arch/mips/include/asm/sn/klconfig.h +++ b/arch/mips/include/asm/sn/klconfig.h @@ -8,8 +8,8 @@ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. * Copyright (C) 1999, 2000 by Ralf Baechle */ -#ifndef _ASM_SN_KLCONFIG_H -#define _ASM_SN_KLCONFIG_H +#ifndef _ASM_SN_KLCONFIG_H +#define _ASM_SN_KLCONFIG_H /* * The KLCONFIG structures store info about the various BOARDs found @@ -20,11 +20,11 @@ /* * WARNING: * Certain assembly language routines (notably xxxxx.s) in the IP27PROM - * will depend on the format of the data structures in this file. In - * most cases, rearranging the fields can seriously break things. - * Adding fields in the beginning or middle can also break things. - * Add fields if necessary, to the end of a struct in such a way - * that offsets of existing fields do not change. + * will depend on the format of the data structures in this file. In + * most cases, rearranging the fields can seriously break things. + * Adding fields in the beginning or middle can also break things. + * Add fields if necessary, to the end of a struct in such a way + * that offsets of existing fields do not change. */ #include <linux/types.h> @@ -35,7 +35,7 @@ #include <asm/sn/sn0/addrs.h> //#include <sys/SN/router.h> // XXX Stolen from <sys/SN/router.h>: -#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ +#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ #include <asm/sn/fru.h> //#include <sys/graph.h> //#include <sys/xtalk/xbow.h> @@ -63,14 +63,14 @@ typedef u64 nic_t; -#define KLCFGINFO_MAGIC 0xbeedbabe +#define KLCFGINFO_MAGIC 0xbeedbabe typedef s32 klconf_off_t; /* * Some IMPORTANT OFFSETS. These are the offsets on all NODES. */ -#define MAX_MODULE_ID 255 +#define MAX_MODULE_ID 255 #define SIZE_PAD 4096 /* 4k padding for structures */ /* * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets, @@ -86,25 +86,25 @@ typedef s32 klconf_off_t; /* All bits in this field are currently used. Try the pad fields if you need more flag bits */ -#define ENABLE_BOARD 0x01 -#define FAILED_BOARD 0x02 -#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which +#define ENABLE_BOARD 0x01 +#define FAILED_BOARD 0x02 +#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which are discovered twice. Use one of them */ #define VISITED_BOARD 0x08 /* Used for compact hub numbering. */ -#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ +#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ #define GLOBAL_MASTER_IO6 0x20 -#define THIRD_NIC_PRESENT 0x40 /* for future use */ -#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ +#define THIRD_NIC_PRESENT 0x40 /* for future use */ +#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ /* klinfo->flags fields */ -#define KLINFO_ENABLE 0x01 /* This component is enabled */ -#define KLINFO_FAILED 0x02 /* This component failed */ -#define KLINFO_DEVICE 0x04 /* This component is a device */ -#define KLINFO_VISITED 0x08 /* This component has been visited */ -#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ -#define KLINFO_INSTALL 0x20 /* Install a driver */ -#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ +#define KLINFO_ENABLE 0x01 /* This component is enabled */ +#define KLINFO_FAILED 0x02 /* This component failed */ +#define KLINFO_DEVICE 0x04 /* This component is a device */ +#define KLINFO_VISITED 0x08 /* This component has been visited */ +#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ +#define KLINFO_INSTALL 0x20 /* Install a driver */ +#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ #define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL) #define GB2 0x80000000 @@ -116,30 +116,30 @@ typedef s32 klconf_off_t; is used in the code to allocate various areas. */ -#define BOARD_STRUCT 0 -#define COMPONENT_STRUCT 1 -#define ERRINFO_STRUCT 2 -#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) -#define DEVICE_STRUCT 3 +#define BOARD_STRUCT 0 +#define COMPONENT_STRUCT 1 +#define ERRINFO_STRUCT 2 +#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) +#define DEVICE_STRUCT 3 typedef struct console_s { - unsigned long uart_base; - unsigned long config_base; - unsigned long memory_base; + unsigned long uart_base; + unsigned long config_base; + unsigned long memory_base; short baud; short flag; int type; nasid_t nasid; char wid; - char npci; + char npci; nic_t baseio_nic; } console_t; typedef struct klc_malloc_hdr { - klconf_off_t km_base; - klconf_off_t km_limit; - klconf_off_t km_current; + klconf_off_t km_base; + klconf_off_t km_limit; + klconf_off_t km_current; } klc_malloc_hdr_t; /* Functions/macros needed to use this structure */ @@ -148,7 +148,7 @@ typedef struct kl_config_hdr { u64 ch_magic; /* set this to KLCFGINFO_MAGIC */ u32 ch_version; /* structure version number */ klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */ - klconf_off_t ch_cons_off; /* offset of ch_cons */ + klconf_off_t ch_cons_off; /* offset of ch_cons */ klconf_off_t ch_board_info; /* the link list of boards */ console_t ch_cons_info; /* address info of the console */ klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX]; @@ -157,27 +157,27 @@ typedef struct kl_config_hdr { } kl_config_hdr_t; -#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) +#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) #define KL_CONFIG_INFO_OFFSET(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_board_info) + (KL_CONFIG_HDR(_nasid)->ch_board_info) #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ - (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) + (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) -#define KL_CONFIG_INFO(_nasid) \ - (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ +#define KL_CONFIG_INFO(_nasid) \ + (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \ 0) #define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic) #define KL_CONFIG_CHECK_MAGIC(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) + (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) #define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) + (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) /* --- New Macros for the changed kl_config_hdr_t structure --- */ -#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ +#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ ((unsigned long)_k + (_k->ch_malloc_hdr_off))) #define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) @@ -190,29 +190,29 @@ typedef struct kl_config_hdr { /* ------------------------------------------------------------- */ #define KL_CONFIG_INFO_START(_nasid) \ - (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) + (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) #define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid) #define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off)) -#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) +#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) -#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) -#define XBOW_PORT_TYPE_IO(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) +#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) +#define XBOW_PORT_TYPE_IO(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) -#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) -#define XBOW_PORT_NASID(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) +#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) +#define XBOW_PORT_NASID(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) -#define XBOW_PORT_IO 0x1 -#define XBOW_PORT_HUB 0x2 +#define XBOW_PORT_IO 0x1 +#define XBOW_PORT_HUB 0x2 #define XBOW_PORT_ENABLE 0x4 -#define SN0_PORT_FENCE_SHFT 0 -#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) +#define SN0_PORT_FENCE_SHFT 0 +#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) /* * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD @@ -242,28 +242,28 @@ typedef struct kl_config_hdr { * KLCONFIG - +------------+ +------------+ +------------+ +------------+ - | lboard | +-->| lboard | +-->| rboard | +-->| lboard | - +------------+ | +------------+ | +------------+ | +------------+ - | board info | | | board info | | |errinfo,bptr| | | board info | - +------------+ | +------------+ | +------------+ | +------------+ - | offset |--+ | offset |--+ | offset |--+ |offset=NULL | - +------------+ +------------+ +------------+ +------------+ + +------------+ +------------+ +------------+ +------------+ + | lboard | +-->| lboard | +-->| rboard | +-->| lboard | + +------------+ | +------------+ | +------------+ | +------------+ + | board info | | | board info | | |errinfo,bptr| | | board info | + +------------+ | +------------+ | +------------+ | +------------+ + | offset |--+ | offset |--+ | offset |--+ |offset=NULL | + +------------+ +------------+ +------------+ +------------+ +------------+ | board info | - +------------+ +--------------------------------+ + +------------+ +--------------------------------+ | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) - +------------+ +--------------------------------+ + +------------+ +--------------------------------+ | compt 2 |--+ - +------------+ | +--------------------------------+ - | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) - +------------+ +--------------------------------+ + +------------+ | +--------------------------------+ + | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) + +------------+ +--------------------------------+ | errinfo |--+ - +------------+ | +--------------------------------+ - +--->|r/l brd errinfo,compt err flags | - +--------------------------------+ + +------------+ | +--------------------------------+ + +--->|r/l brd errinfo,compt err flags | + +--------------------------------+ * * Each BOARD consists of COMPONENTs and the BOARD structure has @@ -311,7 +311,7 @@ typedef struct kl_config_hdr { */ #define KL_CPU_R4000 0x1 /* Standard R4000 */ #define KL_CPU_TFP 0x2 /* TFP processor */ -#define KL_CPU_R10000 0x3 /* R10000 (T5) */ +#define KL_CPU_R10000 0x3 /* R10000 (T5) */ #define KL_CPU_NONE (-1) /* no cpu present in slot */ /* @@ -320,13 +320,13 @@ typedef struct kl_config_hdr { #define KLCLASS_MASK 0xf0 #define KLCLASS_NONE 0x00 -#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ +#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ #define KLCLASS_CPU KLCLASS_NODE -#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI +#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI and the non-graphics widget boards */ -#define KLCLASS_ROUTER 0x30 /* Router board */ -#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board - so that we can record error info */ +#define KLCLASS_ROUTER 0x30 /* Router board */ +#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board + so that we can record error info */ #define KLCLASS_GFX 0x50 /* graphics boards */ #define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx @@ -336,7 +336,7 @@ typedef struct kl_config_hdr { #define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */ #define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */ -#define KLCLASS_UNKNOWN 0xf0 +#define KLCLASS_UNKNOWN 0xf0 #define KLCLASS(_x) ((_x) & KLCLASS_MASK) @@ -353,36 +353,36 @@ typedef struct kl_config_hdr { #define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0) #define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */ -#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ +#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ #define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2) -#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ -#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) -#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ -#define KLTYPE_FDDI (KLCLASS_IO | 0x4) +#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ +#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) +#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ +#define KLTYPE_FDDI (KLCLASS_IO | 0x4) #define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */ -#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ +#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ #define KLTYPE_PCI KLTYPE_HAROLD -#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ -#define KLTYPE_MIO (KLCLASS_IO | 0x8) -#define KLTYPE_FC (KLCLASS_IO | 0x9) -#define KLTYPE_LINC (KLCLASS_IO | 0xA) -#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ -#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ -#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ +#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ +#define KLTYPE_MIO (KLCLASS_IO | 0x8) +#define KLTYPE_FC (KLCLASS_IO | 0x9) +#define KLTYPE_LINC (KLCLASS_IO | 0xA) +#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ +#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ +#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ #define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */ #define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */ #define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */ #define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0) -#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) -#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ +#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) +#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ #define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2) #define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) #define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0) #define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */ -#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 +#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 #define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) #define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) @@ -398,11 +398,11 @@ typedef struct kl_config_hdr { * When bringup started nic names had not standardized and so we * had to hard code. (For people interested in history.) */ -#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) +#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) #define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf) -#define KLTYPE(_x) ((_x) & KLTYPE_MASK) +#define KLTYPE(_x) ((_x) & KLTYPE_MASK) #define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \ (l->brd_flags & SECOND_NIC_PRESENT)) #define IS_MIO_IOC3(l, n) (IS_MIO_PRESENT(l) && (n > 2)) @@ -416,33 +416,33 @@ typedef struct kl_config_hdr { #define LOCAL_BOARD 1 #define REMOTE_BOARD 2 -#define LBOARD_STRUCT_VERSION 2 +#define LBOARD_STRUCT_VERSION 2 typedef struct lboard_s { - klconf_off_t brd_next; /* Next BOARD */ - unsigned char struct_type; /* type of structure, local or remote */ - unsigned char brd_type; /* type+class */ - unsigned char brd_sversion; /* version of this structure */ - unsigned char brd_brevision; /* board revision */ - unsigned char brd_promver; /* board prom version, if any */ - unsigned char brd_flags; /* Enabled, Disabled etc */ - unsigned char brd_slot; /* slot number */ - unsigned short brd_debugsw; /* Debug switches */ - moduleid_t brd_module; /* module to which it belongs */ - partid_t brd_partition; /* Partition number */ - unsigned short brd_diagval; /* diagnostic value */ - unsigned short brd_diagparm; /* diagnostic parameter */ - unsigned char brd_inventory; /* inventory history */ - unsigned char brd_numcompts; /* Number of components */ - nic_t brd_nic; /* Number in CAN */ - nasid_t brd_nasid; /* passed parameter */ - klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ - klconf_off_t brd_errinfo; /* Board's error information */ + klconf_off_t brd_next; /* Next BOARD */ + unsigned char struct_type; /* type of structure, local or remote */ + unsigned char brd_type; /* type+class */ + unsigned char brd_sversion; /* version of this structure */ + unsigned char brd_brevision; /* board revision */ + unsigned char brd_promver; /* board prom version, if any */ + unsigned char brd_flags; /* Enabled, Disabled etc */ + unsigned char brd_slot; /* slot number */ + unsigned short brd_debugsw; /* Debug switches */ + moduleid_t brd_module; /* module to which it belongs */ + partid_t brd_partition; /* Partition number */ + unsigned short brd_diagval; /* diagnostic value */ + unsigned short brd_diagparm; /* diagnostic parameter */ + unsigned char brd_inventory; /* inventory history */ + unsigned char brd_numcompts; /* Number of components */ + nic_t brd_nic; /* Number in CAN */ + nasid_t brd_nasid; /* passed parameter */ + klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ + klconf_off_t brd_errinfo; /* Board's error information */ struct lboard_s *brd_parent; /* Logical parent for this brd */ - vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ + vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ confidence_t brd_confidence; /* confidence that the board is bad */ - nasid_t brd_owner; /* who owns this board */ - unsigned char brd_nic_flags; /* To handle 8 more NICs */ + nasid_t brd_owner; /* who owns this board */ + unsigned char brd_nic_flags; /* To handle 8 more NICs */ char brd_name[32]; } lboard_t; @@ -456,23 +456,23 @@ typedef struct lboard_s { #define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type) #define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type) -#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) +#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) #define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) #define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) -#define KLCF_NEXT(_brd) \ - ((_brd)->brd_next ? \ +#define KLCF_NEXT(_brd) \ + ((_brd)->brd_next ? \ (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\ NULL) -#define KLCF_COMP(_brd, _ndx) \ - (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ +#define KLCF_COMP(_brd, _ndx) \ + (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ (_brd)->brd_compts[(_ndx)])) #define KLCF_COMP_ERROR(_brd, _comp) \ - (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) + (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) #define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) -#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ +#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ @@ -481,73 +481,73 @@ typedef struct lboard_s { * component. */ -typedef struct klinfo_s { /* Generic info */ - unsigned char struct_type; /* type of this structure */ - unsigned char struct_version; /* version of this structure */ - unsigned char flags; /* Enabled, disabled etc */ - unsigned char revision; /* component revision */ - unsigned short diagval; /* result of diagnostics */ - unsigned short diagparm; /* diagnostic parameter */ - unsigned char inventory; /* previous inventory status */ - nic_t nic; /* MUst be aligned properly */ - unsigned char physid; /* physical id of component */ - unsigned int virtid; /* virtual id as seen by system */ - unsigned char widid; /* Widget id - if applicable */ - nasid_t nasid; /* node number - from parent */ +typedef struct klinfo_s { /* Generic info */ + unsigned char struct_type; /* type of this structure */ + unsigned char struct_version; /* version of this structure */ + unsigned char flags; /* Enabled, disabled etc */ + unsigned char revision; /* component revision */ + unsigned short diagval; /* result of diagnostics */ + unsigned short diagparm; /* diagnostic parameter */ + unsigned char inventory; /* previous inventory status */ + nic_t nic; /* MUst be aligned properly */ + unsigned char physid; /* physical id of component */ + unsigned int virtid; /* virtual id as seen by system */ + unsigned char widid; /* Widget id - if applicable */ + nasid_t nasid; /* node number - from parent */ char pad1; /* pad out structure. */ char pad2; /* pad out structure. */ - COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ - klconf_off_t errinfo; /* component specific errors */ - unsigned short pad3; /* pci fields have moved over to */ - unsigned short pad4; /* klbri_t */ + COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ + klconf_off_t errinfo; /* component specific errors */ + unsigned short pad3; /* pci fields have moved over to */ + unsigned short pad4; /* klbri_t */ } klinfo_t ; #define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE) /* * Component structures. * Following are the currently identified components: - * CPU, HUB, MEM_BANK, - * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) - * BRIDGE, IOC3, SuperIO, SCSI, FDDI - * ROUTER - * GRAPHICS + * CPU, HUB, MEM_BANK, + * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) + * BRIDGE, IOC3, SuperIO, SCSI, FDDI + * ROUTER + * GRAPHICS */ #define KLSTRUCT_UNKNOWN 0 -#define KLSTRUCT_CPU 1 -#define KLSTRUCT_HUB 2 -#define KLSTRUCT_MEMBNK 3 -#define KLSTRUCT_XBOW 4 -#define KLSTRUCT_BRI 5 -#define KLSTRUCT_IOC3 6 -#define KLSTRUCT_PCI 7 -#define KLSTRUCT_VME 8 +#define KLSTRUCT_CPU 1 +#define KLSTRUCT_HUB 2 +#define KLSTRUCT_MEMBNK 3 +#define KLSTRUCT_XBOW 4 +#define KLSTRUCT_BRI 5 +#define KLSTRUCT_IOC3 6 +#define KLSTRUCT_PCI 7 +#define KLSTRUCT_VME 8 #define KLSTRUCT_ROU 9 -#define KLSTRUCT_GFX 10 -#define KLSTRUCT_SCSI 11 -#define KLSTRUCT_FDDI 12 -#define KLSTRUCT_MIO 13 -#define KLSTRUCT_DISK 14 -#define KLSTRUCT_TAPE 15 -#define KLSTRUCT_CDROM 16 -#define KLSTRUCT_HUB_UART 17 -#define KLSTRUCT_IOC3ENET 18 -#define KLSTRUCT_IOC3UART 19 +#define KLSTRUCT_GFX 10 +#define KLSTRUCT_SCSI 11 +#define KLSTRUCT_FDDI 12 +#define KLSTRUCT_MIO 13 +#define KLSTRUCT_DISK 14 +#define KLSTRUCT_TAPE 15 +#define KLSTRUCT_CDROM 16 +#define KLSTRUCT_HUB_UART 17 +#define KLSTRUCT_IOC3ENET 18 +#define KLSTRUCT_IOC3UART 19 #define KLSTRUCT_UNUSED 20 /* XXX UNUSED */ -#define KLSTRUCT_IOC3PCKM 21 -#define KLSTRUCT_RAD 22 -#define KLSTRUCT_HUB_TTY 23 -#define KLSTRUCT_IOC3_TTY 24 +#define KLSTRUCT_IOC3PCKM 21 +#define KLSTRUCT_RAD 22 +#define KLSTRUCT_HUB_TTY 23 +#define KLSTRUCT_IOC3_TTY 24 /* Early Access IO proms are compatible only with KLSTRUCT values up to 24. */ -#define KLSTRUCT_FIBERCHANNEL 25 +#define KLSTRUCT_FIBERCHANNEL 25 #define KLSTRUCT_MOD_SERIAL_NUM 26 -#define KLSTRUCT_IOC3MS 27 -#define KLSTRUCT_TPU 28 -#define KLSTRUCT_GSN_A 29 -#define KLSTRUCT_GSN_B 30 -#define KLSTRUCT_XTHD 31 +#define KLSTRUCT_IOC3MS 27 +#define KLSTRUCT_TPU 28 +#define KLSTRUCT_GSN_A 29 +#define KLSTRUCT_GSN_B 30 +#define KLSTRUCT_XTHD 31 /* * These are the indices of various components within a lboard structure. @@ -583,7 +583,7 @@ typedef u64 *router_t; * The port info in ip27_cfg area translates to a lboart_t in the * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t * is stored in terms of a nasid and a offset from start of KLCONFIG - * area on that nasid. + * area on that nasid. */ typedef struct klport_s { nasid_t port_nasid; @@ -591,20 +591,20 @@ typedef struct klport_s { klconf_off_t port_offset; } klport_t; -typedef struct klcpu_s { /* CPU */ - klinfo_t cpu_info; - unsigned short cpu_prid; /* Processor PRID value */ - unsigned short cpu_fpirr; /* FPU IRR value */ - unsigned short cpu_speed; /* Speed in MHZ */ - unsigned short cpu_scachesz; /* secondary cache size in MB */ - unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ +typedef struct klcpu_s { /* CPU */ + klinfo_t cpu_info; + unsigned short cpu_prid; /* Processor PRID value */ + unsigned short cpu_fpirr; /* FPU IRR value */ + unsigned short cpu_speed; /* Speed in MHZ */ + unsigned short cpu_scachesz; /* secondary cache size in MB */ + unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ } klcpu_t ; #define CPU_STRUCT_VERSION 2 typedef struct klhub_s { /* HUB */ - klinfo_t hub_info; - unsigned int hub_flags; /* PCFG_HUB_xxx flags */ + klinfo_t hub_info; + unsigned int hub_flags; /* PCFG_HUB_xxx flags */ klport_t hub_port; /* hub is connected to this */ nic_t hub_box_nic; /* nic of containing box */ klconf_off_t hub_mfg_nic; /* MFG NIC string */ @@ -612,36 +612,36 @@ typedef struct klhub_s { /* HUB */ } klhub_t ; typedef struct klhub_uart_s { /* HUB */ - klinfo_t hubuart_info; - unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */ + klinfo_t hubuart_info; + unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */ nic_t hubuart_box_nic; /* nic of containing box */ } klhub_uart_t ; -#define MEMORY_STRUCT_VERSION 2 +#define MEMORY_STRUCT_VERSION 2 typedef struct klmembnk_s { /* MEMORY BANK */ - klinfo_t membnk_info; - short membnk_memsz; /* Total memory in megabytes */ + klinfo_t membnk_info; + short membnk_memsz; /* Total memory in megabytes */ short membnk_dimm_select; /* bank to physical addr mapping*/ short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */ short membnk_attr; } klmembnk_t ; #define KLCONFIG_MEMBNK_SIZE(_info, _bank) \ - ((_info)->membnk_bnksz[(_bank)]) + ((_info)->membnk_bnksz[(_bank)]) #define MEMBNK_PREMIUM 1 #define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \ - ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) + ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) #define MAX_SERIAL_NUM_SIZE 10 typedef struct klmod_serial_num_s { - klinfo_t snum_info; + klinfo_t snum_info; union { - char snum_str[MAX_SERIAL_NUM_SIZE]; - unsigned long long snum_int; + char snum_str[MAX_SERIAL_NUM_SIZE]; + unsigned long long snum_int; } snum; } klmod_serial_num_t; @@ -650,43 +650,43 @@ typedef struct klmod_serial_num_s { serial number struct as a component without losing compatibility between prom versions. */ -#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ +#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ KLCF_COMP(_l, _l->brd_numcompts)) #define MAX_XBOW_LINKS 16 -typedef struct klxbow_s { /* XBOW */ - klinfo_t xbow_info ; +typedef struct klxbow_s { /* XBOW */ + klinfo_t xbow_info ; klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */ - int xbow_master_hub_link; - /* type of brd connected+component struct ptr+flags */ + int xbow_master_hub_link; + /* type of brd connected+component struct ptr+flags */ } klxbow_t ; #define MAX_PCI_SLOTS 8 typedef struct klpci_device_s { s32 pci_device_id; /* 32 bits of vendor/device ID. */ - s32 pci_device_pad; /* 32 bits of padding. */ + s32 pci_device_pad; /* 32 bits of padding. */ } klpci_device_t; #define BRIDGE_STRUCT_VERSION 2 -typedef struct klbri_s { /* BRIDGE */ - klinfo_t bri_info ; - unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ - unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ - pci_t pci_specific ; /* PCI Board config info */ +typedef struct klbri_s { /* BRIDGE */ + klinfo_t bri_info ; + unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ + unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ + pci_t pci_specific ; /* PCI Board config info */ klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */ klconf_off_t bri_mfg_nic ; } klbri_t ; #define MAX_IOC3_TTY 2 -typedef struct klioc3_s { /* IOC3 */ - klinfo_t ioc3_info ; - unsigned char ioc3_ssram ; /* Info about ssram */ - unsigned char ioc3_nvram ; /* Info about nvram */ - klinfo_t ioc3_superio ; /* Info about superio */ +typedef struct klioc3_s { /* IOC3 */ + klinfo_t ioc3_info ; + unsigned char ioc3_ssram ; /* Info about ssram */ + unsigned char ioc3_nvram ; /* Info about nvram */ + klinfo_t ioc3_superio ; /* Info about superio */ klconf_off_t ioc3_tty_off ; klinfo_t ioc3_enet ; klconf_off_t ioc3_enet_off ; @@ -695,27 +695,27 @@ typedef struct klioc3_s { /* IOC3 */ #define MAX_VME_SLOTS 8 -typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ - klinfo_t vmeb_info ; +typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ + klinfo_t vmeb_info ; vmeb_t vmeb_specific ; - klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ + klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ } klvmeb_t ; -typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ +typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ klinfo_t vmed_info ; vmed_t vmed_specific ; - klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ + klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ } klvmed_t ; #define ROUTER_VECTOR_VERS 2 /* XXX - Don't we need the number of ports here?!? */ -typedef struct klrou_s { /* ROUTER */ - klinfo_t rou_info ; - unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */ - nic_t rou_box_nic ; /* nic of the containing module */ - klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ - klconf_off_t rou_mfg_nic ; /* MFG NIC string */ +typedef struct klrou_s { /* ROUTER */ + klinfo_t rou_info ; + unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */ + nic_t rou_box_nic ; /* nic of the containing module */ + klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ + klconf_off_t rou_mfg_nic ; /* MFG NIC string */ u64 rou_vector; /* vector from master node */ } klrou_t ; @@ -732,30 +732,30 @@ typedef struct klrou_s { /* ROUTER */ #define KLGFX_COOKIE 0x0c0de000 typedef struct klgfx_s { /* GRAPHICS Device */ - klinfo_t gfx_info; - klconf_off_t old_gndevs; /* for compatibility with older proms */ - klconf_off_t old_gdoff0; /* for compatibility with older proms */ + klinfo_t gfx_info; + klconf_off_t old_gndevs; /* for compatibility with older proms */ + klconf_off_t old_gdoff0; /* for compatibility with older proms */ unsigned int cookie; /* for compatibility with older proms */ unsigned int moduleslot; struct klgfx_s *gfx_next_pipe; graphics_t gfx_specific; - klconf_off_t pad0; /* for compatibility with older proms */ - klconf_off_t gfx_mfg_nic; + klconf_off_t pad0; /* for compatibility with older proms */ + klconf_off_t gfx_mfg_nic; } klgfx_t; typedef struct klxthd_s { - klinfo_t xthd_info ; - klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ + klinfo_t xthd_info ; + klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ } klxthd_t ; -typedef struct kltpu_s { /* TPU board */ - klinfo_t tpu_info ; - klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ +typedef struct kltpu_s { /* TPU board */ + klinfo_t tpu_info ; + klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ } kltpu_t ; -typedef struct klgsn_s { /* GSN board */ - klinfo_t gsn_info ; - klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ +typedef struct klgsn_s { /* GSN board */ + klinfo_t gsn_info ; + klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ } klgsn_t ; #define MAX_SCSI_DEVS 16 @@ -767,57 +767,57 @@ typedef struct klgsn_s { /* GSN board */ * that as the size to be klmalloced. */ -typedef struct klscsi_s { /* SCSI Controller */ - klinfo_t scsi_info ; - scsi_t scsi_specific ; - unsigned char scsi_numdevs ; +typedef struct klscsi_s { /* SCSI Controller */ + klinfo_t scsi_info ; + scsi_t scsi_specific ; + unsigned char scsi_numdevs ; klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ; } klscsi_t ; -typedef struct klscdev_s { /* SCSI device */ - klinfo_t scdev_info ; +typedef struct klscdev_s { /* SCSI device */ + klinfo_t scdev_info ; struct scsidisk_data *scdev_cfg ; /* driver fills up this */ } klscdev_t ; -typedef struct klttydev_s { /* TTY device */ - klinfo_t ttydev_info ; +typedef struct klttydev_s { /* TTY device */ + klinfo_t ttydev_info ; struct terminal_data *ttydev_cfg ; /* driver fills up this */ } klttydev_t ; -typedef struct klenetdev_s { /* ENET device */ - klinfo_t enetdev_info ; +typedef struct klenetdev_s { /* ENET device */ + klinfo_t enetdev_info ; struct net_data *enetdev_cfg ; /* driver fills up this */ } klenetdev_t ; -typedef struct klkbddev_s { /* KBD device */ - klinfo_t kbddev_info ; +typedef struct klkbddev_s { /* KBD device */ + klinfo_t kbddev_info ; struct keyboard_data *kbddev_cfg ; /* driver fills up this */ } klkbddev_t ; -typedef struct klmsdev_s { /* mouse device */ - klinfo_t msdev_info ; - void *msdev_cfg ; +typedef struct klmsdev_s { /* mouse device */ + klinfo_t msdev_info ; + void *msdev_cfg ; } klmsdev_t ; #define MAX_FDDI_DEVS 10 /* XXX Is this true */ -typedef struct klfddi_s { /* FDDI */ - klinfo_t fddi_info ; - fddi_t fddi_specific ; +typedef struct klfddi_s { /* FDDI */ + klinfo_t fddi_info ; + fddi_t fddi_specific ; klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ; } klfddi_t ; -typedef struct klmio_s { /* MIO */ - klinfo_t mio_info ; - mio_t mio_specific ; +typedef struct klmio_s { /* MIO */ + klinfo_t mio_info ; + mio_t mio_specific ; } klmio_t ; typedef union klcomp_s { klcpu_t kc_cpu; klhub_t kc_hub; - klmembnk_t kc_mem; - klxbow_t kc_xbow; + klmembnk_t kc_mem; + klxbow_t kc_xbow; klbri_t kc_bri; klioc3_t kc_ioc3; klvmeb_t kc_vmeb; @@ -831,11 +831,11 @@ typedef union klcomp_s { klmod_serial_num_t kc_snum ; } klcomp_t; -typedef union kldev_s { /* for device structure allocation */ +typedef union kldev_s { /* for device structure allocation */ klscdev_t kc_scsi_dev ; klttydev_t kc_tty_dev ; klenetdev_t kc_enet_dev ; - klkbddev_t kc_kbd_dev ; + klkbddev_t kc_kbd_dev ; } kldev_t ; /* Data structure interface routines. TBD */ diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h index 1327e12..bfb3aec 100644 --- a/arch/mips/include/asm/sn/kldir.h +++ b/arch/mips/include/asm/sn/kldir.h @@ -16,8 +16,8 @@ * The kldir memory area resides at a fixed place in each node's memory and * provides pointers to most other IP27 memory areas. This allows us to * resize and/or relocate memory areas at a later time without breaking all - * firmware and kernels that use them. Indices in the array are - * permanently dedicated to areas listed below. Some memory areas (marked + * firmware and kernels that use them. Indices in the array are + * permanently dedicated to areas listed below. Some memory areas (marked * below) reside at a permanently fixed location, but are included in the * directory for completeness. */ @@ -28,98 +28,98 @@ * The upper portion of the memory map applies during boot * only and is overwritten by IRIX/SYMMON. * - * MEMORY MAP PER NODE + * MEMORY MAP PER NODE * - * 0x2000000 (32M) +-----------------------------------------+ - * | IO6 BUFFERS FOR FLASH ENET IOC3 | - * 0x1F80000 (31.5M) +-----------------------------------------+ - * | IO6 TEXT/DATA/BSS/stack | - * 0x1C00000 (30M) +-----------------------------------------+ - * | IO6 PROM DEBUG TEXT/DATA/BSS/stack | - * 0x0800000 (28M) +-----------------------------------------+ - * | IP27 PROM TEXT/DATA/BSS/stack | - * 0x1B00000 (27M) +-----------------------------------------+ - * | IP27 CFG | - * 0x1A00000 (26M) +-----------------------------------------+ - * | Graphics PROM | - * 0x1800000 (24M) +-----------------------------------------+ - * | 3rd Party PROM drivers | - * 0x1600000 (22M) +-----------------------------------------+ - * | | - * | Free | - * | | - * +-----------------------------------------+ - * | UNIX DEBUG Version | - * 0x190000 (2M--) +-----------------------------------------+ - * | SYMMON | - * | (For UNIX Debug only) | - * 0x34000 (208K) +-----------------------------------------+ - * | SYMMON STACK [NUM_CPU_PER_NODE] | - * | (For UNIX Debug only) | - * 0x25000 (148K) +-----------------------------------------+ - * | KLCONFIG - II (temp) | - * | | - * | ---------------------------- | - * | | - * | UNIX NON-DEBUG Version | - * 0x19000 (100K) +-----------------------------------------+ + * 0x2000000 (32M) +-----------------------------------------+ + * | IO6 BUFFERS FOR FLASH ENET IOC3 | + * 0x1F80000 (31.5M) +-----------------------------------------+ + * | IO6 TEXT/DATA/BSS/stack | + * 0x1C00000 (30M) +-----------------------------------------+ + * | IO6 PROM DEBUG TEXT/DATA/BSS/stack | + * 0x0800000 (28M) +-----------------------------------------+ + * | IP27 PROM TEXT/DATA/BSS/stack | + * 0x1B00000 (27M) +-----------------------------------------+ + * | IP27 CFG | + * 0x1A00000 (26M) +-----------------------------------------+ + * | Graphics PROM | + * 0x1800000 (24M) +-----------------------------------------+ + * | 3rd Party PROM drivers | + * 0x1600000 (22M) +-----------------------------------------+ + * | | + * | Free | + * | | + * +-----------------------------------------+ + * | UNIX DEBUG Version | + * 0x190000 (2M--) +-----------------------------------------+ + * | SYMMON | + * | (For UNIX Debug only) | + * 0x34000 (208K) +-----------------------------------------+ + * | SYMMON STACK [NUM_CPU_PER_NODE] | + * | (For UNIX Debug only) | + * 0x25000 (148K) +-----------------------------------------+ + * | KLCONFIG - II (temp) | + * | | + * | ---------------------------- | + * | | + * | UNIX NON-DEBUG Version | + * 0x19000 (100K) +-----------------------------------------+ * * * The lower portion of the memory map contains information that is * permanent and is used by the IP27PROM, IO6PROM and IRIX. * - * 0x19000 (100K) +-----------------------------------------+ - * | | - * | PI Error Spools (32K) | - * | | - * 0x12000 (72K) +-----------------------------------------+ - * | Unused | - * 0x11c00 (71K) +-----------------------------------------+ - * | CPU 1 NMI Eframe area | - * 0x11a00 (70.5K) +-----------------------------------------+ - * | CPU 0 NMI Eframe area | - * 0x11800 (70K) +-----------------------------------------+ - * | CPU 1 NMI Register save area | - * 0x11600 (69.5K) +-----------------------------------------+ - * | CPU 0 NMI Register save area | - * 0x11400 (69K) +-----------------------------------------+ - * | GDA (1k) | - * 0x11000 (68K) +-----------------------------------------+ - * | Early cache Exception stack | - * | and/or | - * | kernel/io6prom nmi registers | + * 0x19000 (100K) +-----------------------------------------+ + * | | + * | PI Error Spools (32K) | + * | | + * 0x12000 (72K) +-----------------------------------------+ + * | Unused | + * 0x11c00 (71K) +-----------------------------------------+ + * | CPU 1 NMI Eframe area | + * 0x11a00 (70.5K) +-----------------------------------------+ + * | CPU 0 NMI Eframe area | + * 0x11800 (70K) +-----------------------------------------+ + * | CPU 1 NMI Register save area | + * 0x11600 (69.5K) +-----------------------------------------+ + * | CPU 0 NMI Register save area | + * 0x11400 (69K) +-----------------------------------------+ + * | GDA (1k) | + * 0x11000 (68K) +-----------------------------------------+ + * | Early cache Exception stack | + * | and/or | + * | kernel/io6prom nmi registers | * 0x10800 (66k) +-----------------------------------------+ - * | cache error eframe | - * 0x10400 (65K) +-----------------------------------------+ - * | Exception Handlers (UALIAS copy) | - * 0x10000 (64K) +-----------------------------------------+ - * | | - * | | - * | KLCONFIG - I (permanent) (48K) | - * | | - * | | - * | | - * 0x4000 (16K) +-----------------------------------------+ - * | NMI Handler (Protected Page) | - * 0x3000 (12K) +-----------------------------------------+ - * | ARCS PVECTORS (master node only) | - * 0x2c00 (11K) +-----------------------------------------+ - * | ARCS TVECTORS (master node only) | - * 0x2800 (10K) +-----------------------------------------+ - * | LAUNCH [NUM_CPU] | - * 0x2400 (9K) +-----------------------------------------+ - * | Low memory directory (KLDIR) | - * 0x2000 (8K) +-----------------------------------------+ - * | ARCS SPB (1K) | - * 0x1000 (4K) +-----------------------------------------+ - * | Early cache Exception stack | - * | and/or | - * | kernel/io6prom nmi registers | - * 0x800 (2k) +-----------------------------------------+ - * | cache error eframe | - * 0x400 (1K) +-----------------------------------------+ - * | Exception Handlers | - * 0x0 (0K) +-----------------------------------------+ + * | cache error eframe | + * 0x10400 (65K) +-----------------------------------------+ + * | Exception Handlers (UALIAS copy) | + * 0x10000 (64K) +-----------------------------------------+ + * | | + * | | + * | KLCONFIG - I (permanent) (48K) | + * | | + * | | + * | | + * 0x4000 (16K) +-----------------------------------------+ + * | NMI Handler (Protected Page) | + * 0x3000 (12K) +-----------------------------------------+ + * | ARCS PVECTORS (master node only) | + * 0x2c00 (11K) +-----------------------------------------+ + * | ARCS TVECTORS (master node only) | + * 0x2800 (10K) +-----------------------------------------+ + * | LAUNCH [NUM_CPU] | + * 0x2400 (9K) +-----------------------------------------+ + * | Low memory directory (KLDIR) | + * 0x2000 (8K) +-----------------------------------------+ + * | ARCS SPB (1K) | + * 0x1000 (4K) +-----------------------------------------+ + * | Early cache Exception stack | + * | and/or | + * | kernel/io6prom nmi registers | + * 0x800 (2k) +-----------------------------------------+ + * | cache error eframe | + * 0x400 (1K) +-----------------------------------------+ + * | Exception Handlers | + * 0x0 (0K) +-----------------------------------------+ */ #ifdef __ASSEMBLY__ @@ -202,13 +202,13 @@ #ifndef __ASSEMBLY__ typedef struct kldir_ent_s { - u64 magic; /* Indicates validity of entry */ + u64 magic; /* Indicates validity of entry */ off_t offset; /* Offset from start of node space */ unsigned long pointer; /* Pointer to area in some cases */ - size_t size; /* Size in bytes */ + size_t size; /* Size in bytes */ u64 count; /* Repeat count if array, 1 if not */ - size_t stride; /* Stride if array, 0 if not */ - char rsvd[16]; /* Pad entry to 0x40 bytes */ + size_t stride; /* Stride if array, 0 if not */ + char rsvd[16]; /* Pad entry to 0x40 bytes */ /* NOTE: These 16 bytes are used in the Partition KLDIR entry to store partition info. Refer to klpart.h for this. */ } kldir_ent_t; diff --git a/arch/mips/include/asm/sn/launch.h b/arch/mips/include/asm/sn/launch.h index b7c2226..04226d8 100644 --- a/arch/mips/include/asm/sn/launch.h +++ b/arch/mips/include/asm/sn/launch.h @@ -19,7 +19,7 @@ * * The master stores launch parameters in the launch structure * corresponding to a target processor that is in a slave loop, then sends - * an interrupt to the slave processor. The slave calls the desired + * an interrupt to the slave processor. The slave calls the desired * function, then returns to the slave loop. The master may poll or wait * for the slaves to finish. * @@ -33,7 +33,7 @@ #define LAUNCH_PADSZ 0xa0 #endif -#define LAUNCH_OFF_MAGIC 0x00 /* Struct offsets for assembly */ +#define LAUNCH_OFF_MAGIC 0x00 /* Struct offsets for assembly */ #define LAUNCH_OFF_BUSY 0x08 #define LAUNCH_OFF_CALL 0x10 #define LAUNCH_OFF_CALLC 0x18 @@ -44,7 +44,7 @@ #define LAUNCH_OFF_BEVNORMAL 0x40 #define LAUNCH_OFF_BEVECC 0x48 -#define LAUNCH_STATE_DONE 0 /* Return value of LAUNCH_POLL */ +#define LAUNCH_STATE_DONE 0 /* Return value of LAUNCH_POLL */ #define LAUNCH_STATE_SENT 1 #define LAUNCH_STATE_RECD 2 @@ -65,16 +65,16 @@ typedef int launch_state_t; typedef void (*launch_proc_t)(u64 call_parm); typedef struct launch_s { - volatile u64 magic; /* Magic number */ - volatile u64 busy; /* Slave currently active */ + volatile u64 magic; /* Magic number */ + volatile u64 busy; /* Slave currently active */ volatile launch_proc_t call_addr; /* Func. for slave to call */ volatile u64 call_addr_c; /* 1's complement of call_addr*/ volatile u64 call_parm; /* Single parm passed to call*/ volatile void *stack_addr; /* Stack pointer for slave function */ volatile void *gp_addr; /* Global pointer for slave func. */ - volatile char *bevutlb;/* Address of bev utlb ex handler */ - volatile char *bevnormal;/*Address of bev normal ex handler */ - volatile char *bevecc;/* Address of bev cache err handler */ + volatile char *bevutlb;/* Address of bev utlb ex handler */ + volatile char *bevnormal;/*Address of bev normal ex handler */ + volatile char *bevecc;/* Address of bev cache err handler */ volatile char pad[160]; /* Pad to LAUNCH_SIZEOF */ } launch_t; diff --git a/arch/mips/include/asm/sn/mapped_kernel.h b/arch/mips/include/asm/sn/mapped_kernel.h index 721496a..401f3b0 100644 --- a/arch/mips/include/asm/sn/mapped_kernel.h +++ b/arch/mips/include/asm/sn/mapped_kernel.h @@ -48,7 +48,7 @@ #endif /* CONFIG_MAPPED_KERNEL */ -#define MAPPED_KERN_RO_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x)) -#define MAPPED_KERN_RW_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x)) +#define MAPPED_KERN_RO_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x)) +#define MAPPED_KERN_RW_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x)) #endif /* __ASM_SN_MAPPED_KERNEL_H */ diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h index 1af4989..12ac210 100644 --- a/arch/mips/include/asm/sn/nmi.h +++ b/arch/mips/include/asm/sn/nmi.h @@ -19,7 +19,7 @@ * * The master stores launch parameters in the launch structure * corresponding to a target processor that is in a slave loop, then sends - * an interrupt to the slave processor. The slave calls the desired + * an interrupt to the slave processor. The slave calls the desired * function, followed by an optional rendezvous function, then returns to * the slave loop. The master does not wait for the slaves before * returning. @@ -31,7 +31,7 @@ #define NMI_MAGIC 0x48414d4d455201 #define NMI_SIZEOF 0x40 -#define NMI_OFF_MAGIC 0x00 /* Struct offsets for assembly */ +#define NMI_OFF_MAGIC 0x00 /* Struct offsets for assembly */ #define NMI_OFF_FLAGS 0x08 #define NMI_OFF_CALL 0x10 #define NMI_OFF_CALLC 0x18 @@ -53,8 +53,8 @@ typedef struct nmi_s { volatile unsigned long magic; /* Magic number */ volatile unsigned long flags; /* Combination of flags above */ - volatile void *call_addr; /* Routine for slave to call */ - volatile void *call_addr_c; /* 1's complement of address */ + volatile void *call_addr; /* Routine for slave to call */ + volatile void *call_addr_c; /* 1's complement of address */ volatile void *call_parm; /* Single parm passed to call */ volatile unsigned long gmaster; /* Flag true only on global master*/ } nmi_t; diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h index b061900..6b53070 100644 --- a/arch/mips/include/asm/sn/sn0/addrs.h +++ b/arch/mips/include/asm/sn/sn0/addrs.h @@ -29,7 +29,7 @@ * chapter of the Hub specification. * * NOTE: This header file is included both by C and by assembler source - * files. Please bracket any language-dependent definitions + * files. Please bracket any language-dependent definitions * appropriately. */ @@ -102,14 +102,14 @@ #define BWIN_INDEX_BITS 3 #define BWIN_SIZE (UINT64_CAST 1 << BWIN_SIZE_BITS) -#define BWIN_SIZEMASK (BWIN_SIZE - 1) -#define BWIN_WIDGET_MASK 0x7 +#define BWIN_SIZEMASK (BWIN_SIZE - 1) +#define BWIN_WIDGET_MASK 0x7 #define NODE_BWIN_BASE0(nasid) (NODE_IO_BASE(nasid) + BWIN_SIZE) -#define NODE_BWIN_BASE(nasid, bigwin) (NODE_BWIN_BASE0(nasid) + \ +#define NODE_BWIN_BASE(nasid, bigwin) (NODE_BWIN_BASE0(nasid) + \ (UINT64_CAST(bigwin) << BWIN_SIZE_BITS)) -#define BWIN_WIDGETADDR(addr) ((addr) & BWIN_SIZEMASK) -#define BWIN_WINDOWNUM(addr) (((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) +#define BWIN_WIDGETADDR(addr) ((addr) & BWIN_SIZEMASK) +#define BWIN_WINDOWNUM(addr) (((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) /* * Verify if addr belongs to large window address of node with "nasid" * @@ -120,7 +120,7 @@ * */ -#define NODE_BWIN_ADDR(nasid, addr) \ +#define NODE_BWIN_ADDR(nasid, addr) \ (((addr) >= NODE_BWIN_BASE0(nasid)) && \ ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \ BWIN_SIZE))) @@ -129,7 +129,7 @@ * The following define the major position-independent aliases used * in SN0. * CALIAS -- Varies in size, points to the first n bytes of memory - * on the reader's node. + * on the reader's node. */ #define CALIAS_BASE CAC_BASE @@ -146,7 +146,7 @@ #ifndef __ASSEMBLY__ #define KERN_NMI_ADDR(nasid, slice) \ - TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + \ + TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + \ (IP27_NMI_KREGS_CPU_SIZE * (slice))) #endif /* !__ASSEMBLY__ */ @@ -203,7 +203,7 @@ #define IO6PROM_BASE PHYS_TO_K0(0x01c00000) #define IO6PROM_SIZE 0x400000 -#define IO6PROM_BASE_MAPPED (UNCAC_BASE | 0x11c00000) +#define IO6PROM_BASE_MAPPED (UNCAC_BASE | 0x11c00000) #define IO6DPROM_BASE PHYS_TO_K0(0x01c00000) #define IO6DPROM_SIZE 0x200000 diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h index f734f20..425a67e 100644 --- a/arch/mips/include/asm/sn/sn0/arch.h +++ b/arch/mips/include/asm/sn/sn0/arch.h @@ -12,23 +12,23 @@ #define _ASM_SN_SN0_ARCH_H -#ifndef SN0XXL /* 128 cpu SMP max */ +#ifndef SN0XXL /* 128 cpu SMP max */ /* * This is the maximum number of nodes that can be part of a kernel. * Effectively, it's the maximum number of compact node ids (cnodeid_t). */ -#define MAX_COMPACT_NODES 64 +#define MAX_COMPACT_NODES 64 /* * MAXCPUS refers to the maximum number of CPUs in a single kernel. * This is not necessarily the same as MAXNODES * CPUS_PER_NODE */ -#define MAXCPUS 128 +#define MAXCPUS 128 #else /* SN0XXL system */ -#define MAX_COMPACT_NODES 128 -#define MAXCPUS 256 +#define MAX_COMPACT_NODES 128 +#define MAXCPUS 256 #endif /* SN0XXL */ @@ -41,9 +41,9 @@ /* * MAX_REGIONS refers to the maximum number of hardware partitioned regions. */ -#define MAX_REGIONS 64 -#define MAX_NONPREMIUM_REGIONS 16 -#define MAX_PREMIUM_REGIONS MAX_REGIONS +#define MAX_REGIONS 64 +#define MAX_NONPREMIUM_REGIONS 16 +#define MAX_PREMIUM_REGIONS MAX_REGIONS /* * MAX_PARITIONS refers to the maximum number of logically defined @@ -57,12 +57,12 @@ * Slot constants for SN0 */ #ifdef CONFIG_SGI_SN_N_MODE -#define MAX_MEM_SLOTS 16 /* max slots per node */ +#define MAX_MEM_SLOTS 16 /* max slots per node */ #else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */ -#define MAX_MEM_SLOTS 32 /* max slots per node */ +#define MAX_MEM_SLOTS 32 /* max slots per node */ #endif /* CONFIG_SGI_SN_M_MODE */ -#define SLOT_SHIFT (27) +#define SLOT_SHIFT (27) #define SLOT_MIN_MEM_SIZE (32*1024*1024) #define CPUS_PER_NODE 2 /* CPUs on a single hub */ diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h index 3e228f8..d78dd76 100644 --- a/arch/mips/include/asm/sn/sn0/hub.h +++ b/arch/mips/include/asm/sn/sn0/hub.h @@ -19,8 +19,8 @@ #define HUB_REV_2_0 2 #define HUB_REV_2_1 3 #define HUB_REV_2_2 4 -#define HUB_REV_2_3 5 -#define HUB_REV_2_4 6 +#define HUB_REV_2_3 5 +#define HUB_REV_2_4 6 #define MAX_HUB_PATH 80 @@ -32,9 +32,9 @@ //#include <asm/sn/sn0/hubcore.h> /* Translation of uncached attributes */ -#define UATTR_HSPEC 0 -#define UATTR_IO 1 -#define UATTR_MSPEC 2 -#define UATTR_UNCAC 3 +#define UATTR_HSPEC 0 +#define UATTR_IO 1 +#define UATTR_MSPEC 2 +#define UATTR_UNCAC 3 #endif /* _ASM_SN_SN0_HUB_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h index 46286d8..5998b13 100644 --- a/arch/mips/include/asm/sn/sn0/hubio.h +++ b/arch/mips/include/asm/sn/sn0/hubio.h @@ -8,8 +8,8 @@ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. * Copyright (C) 1999 by Ralf Baechle */ -#ifndef _ASM_SGI_SN_SN0_HUBIO_H -#define _ASM_SGI_SN_SN0_HUBIO_H +#ifndef _ASM_SGI_SN_SN0_HUBIO_H +#define _ASM_SGI_SN_SN0_HUBIO_H /* * Hub I/O interface registers @@ -22,7 +22,7 @@ * Slightly friendlier names for some common registers. * The hardware definitions follow. */ -#define IIO_WIDGET IIO_WID /* Widget identification */ +#define IIO_WIDGET IIO_WID /* Widget identification */ #define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */ #define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */ #define IIO_WIDGET_TOUT IIO_WRTO /* Widget request timeout */ @@ -37,21 +37,21 @@ #define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout*/ #define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */ #define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */ -#define IIO_BTE_CRB_CNT IIO_IBCN /* IO BTE CRB count */ +#define IIO_BTE_CRB_CNT IIO_IBCN /* IO BTE CRB count */ #define IIO_LLP_CSR_IS_UP 0x00002000 -#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 -#define IIO_LLP_CSR_LLP_STAT_SHFT 12 +#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 +#define IIO_LLP_CSR_LLP_STAT_SHFT 12 /* key to IIO_PROTECT_OVRRD */ #define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */ /* BTE register names */ #define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */ -#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ +#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ #define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */ #define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */ -#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ +#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ #define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */ #define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */ #define IIO_BTE_OFF_1 IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */ @@ -83,11 +83,11 @@ #define IIO_WSTAT 0x400008 /* Widget status */ #define IIO_WCR 0x400020 /* Widget control */ -#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */ -#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */ -#define IIO_WSTAT_TXRETRY_MASK (0x7F) -#define IIO_WSTAT_TXRETRY_SHFT (16) -#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \ +#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */ +#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */ +#define IIO_WSTAT_TXRETRY_MASK (0x7F) +#define IIO_WSTAT_TXRETRY_SHFT (16) +#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \ IIO_WSTAT_TXRETRY_MASK) #define IIO_ILAPR 0x400100 /* Local Access Protection */ @@ -130,12 +130,12 @@ #define IIO_IGFX_INIT(widget, node, cpu, valid) (\ (((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \ (((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \ - (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) | \ - (((valid) & IIO_IGFX_VLD_MASK) << IIO_IGFX_VLD_SHIFT) ) + (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) | \ + (((valid) & IIO_IGFX_VLD_MASK) << IIO_IGFX_VLD_SHIFT) ) /* Scratch registers (not all bits available) */ #define IIO_SCRATCH_REG0 0x400150 -#define IIO_SCRATCH_REG1 0x400158 +#define IIO_SCRATCH_REG1 0x400158 #define IIO_SCRATCH_MASK 0x0000000f00f11fff #define IIO_SCRATCH_BIT0_0 0x0000000800000000 @@ -174,43 +174,43 @@ typedef union hubii_wid_u { u64 wid_reg_value; struct { - u64 wid_rsvd: 32, /* unused */ + u64 wid_rsvd: 32, /* unused */ wid_rev_num: 4, /* revision number */ wid_part_num: 16, /* the widget type: hub=c101 */ wid_mfg_num: 11, /* Manufacturer id (IBM) */ wid_rsvd1: 1; /* Reserved */ - } wid_fields_s; + } wid_fields_s; } hubii_wid_t; typedef union hubii_wcr_u { u64 wcr_reg_value; struct { - u64 wcr_rsvd: 41, /* unused */ + u64 wcr_rsvd: 41, /* unused */ wcr_e_thresh: 5, /* elasticity threshold */ wcr_dir_con: 1, /* widget direct connect */ wcr_f_bad_pkt: 1, /* Force bad llp pkt enable */ wcr_xbar_crd: 3, /* LLP crossbar credit */ wcr_rsvd1: 8, /* Reserved */ - wcr_tag_mode: 1, /* Tag mode */ + wcr_tag_mode: 1, /* Tag mode */ wcr_widget_id: 4; /* LLP crossbar credit */ - } wcr_fields_s; + } wcr_fields_s; } hubii_wcr_t; -#define iwcr_dir_con wcr_fields_s.wcr_dir_con +#define iwcr_dir_con wcr_fields_s.wcr_dir_con typedef union hubii_wstat_u { - u64 reg_value; + u64 reg_value; struct { u64 rsvd1: 31, crazy: 1, /* Crazy bit */ rsvd2: 8, - llp_tx_cnt: 8, /* LLP Xmit retry counter */ + llp_tx_cnt: 8, /* LLP Xmit retry counter */ rsvd3: 6, tx_max_rtry: 1, /* LLP Retry Timeout Signal */ rsvd4: 2, xt_tail_to: 1, /* Xtalk Tail Timeout */ - xt_crd_to: 1, /* Xtalk Credit Timeout */ + xt_crd_to: 1, /* Xtalk Credit Timeout */ pending: 4; /* Pending Requests */ } wstat_fields_s; } hubii_wstat_t; @@ -219,50 +219,50 @@ typedef union hubii_wstat_u { typedef union hubii_ilcsr_u { u64 icsr_reg_value; struct { - u64 icsr_rsvd: 22, /* unused */ - icsr_max_burst: 10, /* max burst */ - icsr_rsvd4: 6, /* reserved */ - icsr_max_retry: 10, /* max retry */ - icsr_rsvd3: 2, /* reserved */ - icsr_lnk_stat: 2, /* link status */ - icsr_bm8: 1, /* Bit mode 8 */ - icsr_llp_en: 1, /* LLP enable bit */ - icsr_rsvd2: 1, /* reserver */ - icsr_wrm_reset: 1, /* Warm reset bit */ + u64 icsr_rsvd: 22, /* unused */ + icsr_max_burst: 10, /* max burst */ + icsr_rsvd4: 6, /* reserved */ + icsr_max_retry: 10, /* max retry */ + icsr_rsvd3: 2, /* reserved */ + icsr_lnk_stat: 2, /* link status */ + icsr_bm8: 1, /* Bit mode 8 */ + icsr_llp_en: 1, /* LLP enable bit */ + icsr_rsvd2: 1, /* reserver */ + icsr_wrm_reset: 1, /* Warm reset bit */ icsr_rsvd1: 2, /* Data ready offset */ - icsr_null_to: 6; /* Null timeout */ + icsr_null_to: 6; /* Null timeout */ - } icsr_fields_s; + } icsr_fields_s; } hubii_ilcsr_t; typedef union hubii_iowa_u { u64 iowa_reg_value; struct { - u64 iowa_rsvd: 48, /* unused */ + u64 iowa_rsvd: 48, /* unused */ iowa_wxoac: 8, /* xtalk widget access bits */ iowa_rsvd1: 7, /* xtalk widget access bits */ iowa_w0oac: 1; /* xtalk widget access bits */ - } iowa_fields_s; + } iowa_fields_s; } hubii_iowa_t; typedef union hubii_iiwa_u { u64 iiwa_reg_value; struct { - u64 iiwa_rsvd: 48, /* unused */ + u64 iiwa_rsvd: 48, /* unused */ iiwa_wxiac: 8, /* hub wid access bits */ iiwa_rsvd1: 7, /* reserved */ iiwa_w0iac: 1; /* hub wid0 access */ - } iiwa_fields_s; + } iiwa_fields_s; } hubii_iiwa_t; typedef union hubii_illr_u { u64 illr_reg_value; struct { - u64 illr_rsvd: 32, /* unused */ + u64 illr_rsvd: 32, /* unused */ illr_cb_cnt: 16, /* checkbit error count */ illr_sn_cnt: 16; /* sequence number count */ - } illr_fields_s; + } illr_fields_s; } hubii_illr_t; /* The structures below are defined to extract and modify the ii @@ -273,7 +273,7 @@ performance registers */ typedef union io_perf_sel { u64 perf_sel_reg; struct { - u64 perf_rsvd : 48, + u64 perf_rsvd : 48, perf_icct : 8, perf_ippr1 : 4, perf_ippr0 : 4; @@ -301,7 +301,7 @@ typedef union io_perf_cnt { #define IIO_LLP_SN_MAX 0xffff /* IO PRB Entries */ -#define IIO_NUM_IPRBS (9) +#define IIO_NUM_IPRBS (9) #define IIO_IOPRB_0 0x400198 /* PRB entry 0 */ #define IIO_IOPRB_8 0x4001a0 /* PRB entry 8 */ #define IIO_IOPRB_9 0x4001a8 /* PRB entry 9 */ @@ -318,21 +318,21 @@ typedef union io_perf_cnt { #define IIO_IMEM 0x4001e8 /* Miscellaneous Enable Mask */ #define IIO_IXTT 0x4001f0 /* Crosstalk tail timeout */ #define IIO_IECLR 0x4001f8 /* IO error clear */ -#define IIO_IBCN 0x400200 /* IO BTE CRB count */ +#define IIO_IBCN 0x400200 /* IO BTE CRB count */ /* * IIO_IMEM Register fields. */ -#define IIO_IMEM_W0ESD 0x1 /* Widget 0 shut down due to error */ -#define IIO_IMEM_B0ESD (1 << 4) /* BTE 0 shut down due to error */ -#define IIO_IMEM_B1ESD (1 << 8) /* BTE 1 Shut down due to error */ +#define IIO_IMEM_W0ESD 0x1 /* Widget 0 shut down due to error */ +#define IIO_IMEM_B0ESD (1 << 4) /* BTE 0 shut down due to error */ +#define IIO_IMEM_B1ESD (1 << 8) /* BTE 1 Shut down due to error */ /* PIO Read address Table Entries */ #define IIO_IPCA 0x400300 /* PRB Counter adjust */ #define IIO_NUM_PRTES 8 /* Total number of PRB table entries */ #define IIO_PRTE_0 0x400308 /* PIO Read address table entry 0 */ #define IIO_PRTE(_x) (IIO_PRTE_0 + (8 * (_x))) -#define IIO_WIDPRTE(x) IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */ +#define IIO_WIDPRTE(x) IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */ #define IIO_IPDR 0x400388 /* PIO table entry deallocation */ #define IIO_ICDR 0x400390 /* CRB Entry Deallocation */ #define IIO_IFDR 0x400398 /* IOQ FIFO Depth */ @@ -369,35 +369,35 @@ typedef union io_perf_cnt { /* * IIO PIO Deallocation register field masks : (IIO_IPDR) */ -#define IIO_IPDR_PND (1 << 4) +#define IIO_IPDR_PND (1 << 4) /* * IIO CRB deallocation register field masks: (IIO_ICDR) */ -#define IIO_ICDR_PND (1 << 4) +#define IIO_ICDR_PND (1 << 4) /* * IIO CRB control register Fields: IIO_ICCR */ -#define IIO_ICCR_PENDING (0x10000) -#define IIO_ICCR_CMD_MASK (0xFF) -#define IIO_ICCR_CMD_SHFT (7) -#define IIO_ICCR_CMD_NOP (0x0) /* No Op */ -#define IIO_ICCR_CMD_WAKE (0x100) /* Reactivate CRB entry and process */ -#define IIO_ICCR_CMD_TIMEOUT (0x200) /* Make CRB timeout & mark invalid */ -#define IIO_ICCR_CMD_EJECT (0x400) /* Contents of entry written to memory +#define IIO_ICCR_PENDING (0x10000) +#define IIO_ICCR_CMD_MASK (0xFF) +#define IIO_ICCR_CMD_SHFT (7) +#define IIO_ICCR_CMD_NOP (0x0) /* No Op */ +#define IIO_ICCR_CMD_WAKE (0x100) /* Reactivate CRB entry and process */ +#define IIO_ICCR_CMD_TIMEOUT (0x200) /* Make CRB timeout & mark invalid */ +#define IIO_ICCR_CMD_EJECT (0x400) /* Contents of entry written to memory * via a WB */ -#define IIO_ICCR_CMD_FLUSH (0x800) +#define IIO_ICCR_CMD_FLUSH (0x800) /* * CRB manipulation macros * The CRB macros are slightly complicated, since there are up to - * four registers associated with each CRB entry. + * four registers associated with each CRB entry. */ #define IIO_NUM_CRBS 15 /* Number of CRBs */ -#define IIO_NUM_NORMAL_CRBS 12 /* Number of regular CRB entries */ -#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */ +#define IIO_NUM_NORMAL_CRBS 12 /* Number of regular CRB entries */ +#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */ #define IIO_ICRB_OFFSET 8 #define IIO_ICRB_0 0x400400 /* XXX - This is now tuneable: @@ -405,9 +405,9 @@ typedef union io_perf_cnt { */ #define IIO_ICRB_A(_x) (IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x))) -#define IIO_ICRB_B(_x) (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET) +#define IIO_ICRB_B(_x) (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET) #define IIO_ICRB_C(_x) (IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET) -#define IIO_ICRB_D(_x) (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET) +#define IIO_ICRB_D(_x) (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET) /* XXX - IBUE register coming for Hub 2 */ @@ -444,16 +444,16 @@ typedef union io_perf_cnt { typedef union icrba_u { u64 reg_value; struct { - u64 resvd: 6, + u64 resvd: 6, stall_bte0: 1, /* Stall BTE 0 */ stall_bte1: 1, /* Stall BTE 1 */ error: 1, /* CRB has an error */ - ecode: 3, /* Error Code */ + ecode: 3, /* Error Code */ lnetuce: 1, /* SN0net Uncorrectable error */ - mark: 1, /* CRB Has been marked */ + mark: 1, /* CRB Has been marked */ xerr: 1, /* Error bit set in xtalk header */ sidn: 4, /* SIDN field from xtalk */ - tnum: 5, /* TNUM field in xtalk */ + tnum: 5, /* TNUM field in xtalk */ addr: 38, /* Address of request */ valid: 1, /* Valid status */ iow: 1; /* IO Write operation */ @@ -467,15 +467,15 @@ typedef union h1_icrba_u { u64 reg_value; struct { - u64 resvd: 6, - unused: 1, /* Unused but RW!! */ + u64 resvd: 6, + unused: 1, /* Unused but RW!! */ error: 1, /* CRB has an error */ - ecode: 4, /* Error Code */ + ecode: 4, /* Error Code */ lnetuce: 1, /* SN0net Uncorrectable error */ - mark: 1, /* CRB Has been marked */ + mark: 1, /* CRB Has been marked */ xerr: 1, /* Error bit set in xtalk header */ sidn: 4, /* SIDN field from xtalk */ - tnum: 5, /* TNUM field in xtalk */ + tnum: 5, /* TNUM field in xtalk */ addr: 38, /* Address of request */ valid: 1, /* Valid status */ iow: 1; /* IO Write operation */ @@ -488,21 +488,21 @@ typedef union h1_icrba_u { #endif /* !__ASSEMBLY__ */ -#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */ +#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */ /* * values for "ecode" field */ -#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */ -#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */ -#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access +#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */ +#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */ +#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access * e.g. WINV to a Read only line. */ -#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */ -#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */ -#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */ -#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */ -#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */ +#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */ +#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */ +#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */ +#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */ +#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */ @@ -513,10 +513,10 @@ typedef union h1_icrba_u { typedef union icrbb_u { u64 reg_value; struct { - u64 rsvd1: 5, - btenum: 1, /* BTE to which entry belongs to */ - cohtrans: 1, /* Coherent transaction */ - xtsize: 2, /* Xtalk operation size + u64 rsvd1: 5, + btenum: 1, /* BTE to which entry belongs to */ + cohtrans: 1, /* Coherent transaction */ + xtsize: 2, /* Xtalk operation size * 0: Double Word * 1: 32 Bytes. * 2: 128 Bytes, @@ -526,11 +526,11 @@ typedef union icrbb_u { srcinit: 2, /* Source Initiator: * See below for field values. */ - useold: 1, /* Use OLD command for processing */ + useold: 1, /* Use OLD command for processing */ imsgtype: 2, /* Incoming message type * see below for field values */ - imsg: 8, /* Incoming message */ + imsg: 8, /* Incoming message */ initator: 3, /* Initiator of original request * See below for field values. */ @@ -538,12 +538,12 @@ typedef union icrbb_u { * See below for field values. */ rsvd2: 7, - ackcnt: 11, /* Invalidate ack count */ + ackcnt: 11, /* Invalidate ack count */ resp: 1, /* data response given to processor */ - ack: 1, /* indicates data ack received */ + ack: 1, /* indicates data ack received */ hold: 1, /* entry is gathering inval acks */ wb_pend:1, /* waiting for writeback to complete */ - intvn: 1, /* Intervention */ + intvn: 1, /* Intervention */ stall_ib: 1, /* Stall Ibuf (from crosstalk) */ stall_intr: 1; /* Stall internal interrupts */ } icrbb_field_s; @@ -556,9 +556,9 @@ typedef union h1_icrbb_u { u64 reg_value; struct { u64 rsvd1: 5, - btenum: 1, /* BTE to which entry belongs to */ - cohtrans: 1, /* Coherent transaction */ - xtsize: 2, /* Xtalk operation size + btenum: 1, /* BTE to which entry belongs to */ + cohtrans: 1, /* Coherent transaction */ + xtsize: 2, /* Xtalk operation size * 0: Double Word * 1: 32 Bytes. * 2: 128 Bytes, @@ -568,99 +568,99 @@ typedef union h1_icrbb_u { srcinit: 2, /* Source Initiator: * See below for field values. */ - useold: 1, /* Use OLD command for processing */ + useold: 1, /* Use OLD command for processing */ imsgtype: 2, /* Incoming message type * see below for field values */ - imsg: 8, /* Incoming message */ + imsg: 8, /* Incoming message */ initator: 3, /* Initiator of original request * See below for field values. */ - rsvd2: 1, + rsvd2: 1, pcache: 1, /* entry belongs to partial cache */ reqtype: 5, /* Identifies type of request * See below for field values. */ - stl_ib: 1, /* stall Ibus coming from xtalk */ + stl_ib: 1, /* stall Ibus coming from xtalk */ stl_intr: 1, /* Stall internal interrupts */ - stl_bte0: 1, /* Stall BTE 0 */ + stl_bte0: 1, /* Stall BTE 0 */ stl_bte1: 1, /* Stall BTE 1 */ - intrvn: 1, /* Req was target of intervention */ - ackcnt: 11, /* Invalidate ack count */ + intrvn: 1, /* Req was target of intervention */ + ackcnt: 11, /* Invalidate ack count */ resp: 1, /* data response given to processor */ - ack: 1, /* indicates data ack received */ + ack: 1, /* indicates data ack received */ hold: 1, /* entry is gathering inval acks */ wb_pend:1, /* waiting for writeback to complete */ - sleep: 1, /* xtalk req sleeping till IO-sync */ + sleep: 1, /* xtalk req sleeping till IO-sync */ pnd_reply: 1, /* replies not issed due to IOQ full */ pnd_req: 1; /* reqs not issued due to IOQ full */ } h1_icrbb_field_s; } h1_icrbb_t; -#define b_imsgtype icrbb_field_s.imsgtype -#define b_btenum icrbb_field_s.btenum -#define b_cohtrans icrbb_field_s.cohtrans -#define b_xtsize icrbb_field_s.xtsize -#define b_srcnode icrbb_field_s.srcnode -#define b_srcinit icrbb_field_s.srcinit -#define b_imsgtype icrbb_field_s.imsgtype -#define b_imsg icrbb_field_s.imsg -#define b_initiator icrbb_field_s.initiator +#define b_imsgtype icrbb_field_s.imsgtype +#define b_btenum icrbb_field_s.btenum +#define b_cohtrans icrbb_field_s.cohtrans +#define b_xtsize icrbb_field_s.xtsize +#define b_srcnode icrbb_field_s.srcnode +#define b_srcinit icrbb_field_s.srcinit +#define b_imsgtype icrbb_field_s.imsgtype +#define b_imsg icrbb_field_s.imsg +#define b_initiator icrbb_field_s.initiator #endif /* !__ASSEMBLY__ */ /* * values for field xtsize */ -#define IIO_ICRB_XTSIZE_DW 0 /* Xtalk operation size is 8 bytes */ -#define IIO_ICRB_XTSIZE_32 1 /* Xtalk operation size is 32 bytes */ -#define IIO_ICRB_XTSIZE_128 2 /* Xtalk operation size is 128 bytes */ +#define IIO_ICRB_XTSIZE_DW 0 /* Xtalk operation size is 8 bytes */ +#define IIO_ICRB_XTSIZE_32 1 /* Xtalk operation size is 32 bytes */ +#define IIO_ICRB_XTSIZE_128 2 /* Xtalk operation size is 128 bytes */ /* * values for field srcinit */ -#define IIO_ICRB_PROC0 0 /* Source of request is Proc 0 */ -#define IIO_ICRB_PROC1 1 /* Source of request is Proc 1 */ -#define IIO_ICRB_GB_REQ 2 /* Source is Guaranteed BW request */ -#define IIO_ICRB_IO_REQ 3 /* Source is Normal IO request */ +#define IIO_ICRB_PROC0 0 /* Source of request is Proc 0 */ +#define IIO_ICRB_PROC1 1 /* Source of request is Proc 1 */ +#define IIO_ICRB_GB_REQ 2 /* Source is Guaranteed BW request */ +#define IIO_ICRB_IO_REQ 3 /* Source is Normal IO request */ /* * Values for field imsgtype */ -#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Meessage from Xtalk */ -#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */ -#define IIO_ICRB_IMSGT_SN0NET 2 /* Incoming message from SN0 net */ -#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */ +#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Meessage from Xtalk */ +#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */ +#define IIO_ICRB_IMSGT_SN0NET 2 /* Incoming message from SN0 net */ +#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */ /* * values for field initiator. */ -#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */ -#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */ -#define IIO_ICRB_INIT_SN0NET 0x2 /* Message originated in SN0net */ -#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */ -#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */ +#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */ +#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */ +#define IIO_ICRB_INIT_SN0NET 0x2 /* Message originated in SN0net */ +#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */ +#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */ /* * Values for field reqtype. */ /* XXX - Need to fix this for Hub 2 */ -#define IIO_ICRB_REQ_DWRD 0 /* Request type double word */ -#define IIO_ICRB_REQ_QCLRD 1 /* Request is Qrtr Caceh line Rd */ -#define IIO_ICRB_REQ_BLKRD 2 /* Request is block read */ -#define IIO_ICRB_REQ_RSHU 6 /* Request is BTE block read */ -#define IIO_ICRB_REQ_REXU 7 /* request is BTE Excl Read */ -#define IIO_ICRB_REQ_RDEX 8 /* Request is Read Exclusive */ -#define IIO_ICRB_REQ_WINC 9 /* Request is Write Invalidate */ -#define IIO_ICRB_REQ_BWINV 10 /* Request is BTE Winv */ -#define IIO_ICRB_REQ_PIORD 11 /* Request is PIO read */ -#define IIO_ICRB_REQ_PIOWR 12 /* Request is PIO Write */ -#define IIO_ICRB_REQ_PRDM 13 /* Request is Fetch&Op */ -#define IIO_ICRB_REQ_PWRM 14 /* Request is Store &Op */ -#define IIO_ICRB_REQ_PTPWR 15 /* Request is Peer to peer */ -#define IIO_ICRB_REQ_WB 16 /* Request is Write back */ -#define IIO_ICRB_REQ_DEX 17 /* Retained DEX Cache line */ +#define IIO_ICRB_REQ_DWRD 0 /* Request type double word */ +#define IIO_ICRB_REQ_QCLRD 1 /* Request is Qrtr Caceh line Rd */ +#define IIO_ICRB_REQ_BLKRD 2 /* Request is block read */ +#define IIO_ICRB_REQ_RSHU 6 /* Request is BTE block read */ +#define IIO_ICRB_REQ_REXU 7 /* request is BTE Excl Read */ +#define IIO_ICRB_REQ_RDEX 8 /* Request is Read Exclusive */ +#define IIO_ICRB_REQ_WINC 9 /* Request is Write Invalidate */ +#define IIO_ICRB_REQ_BWINV 10 /* Request is BTE Winv */ +#define IIO_ICRB_REQ_PIORD 11 /* Request is PIO read */ +#define IIO_ICRB_REQ_PIOWR 12 /* Request is PIO Write */ +#define IIO_ICRB_REQ_PRDM 13 /* Request is Fetch&Op */ +#define IIO_ICRB_REQ_PWRM 14 /* Request is Store &Op */ +#define IIO_ICRB_REQ_PTPWR 15 /* Request is Peer to peer */ +#define IIO_ICRB_REQ_WB 16 /* Request is Write back */ +#define IIO_ICRB_REQ_DEX 17 /* Retained DEX Cache line */ /* * Fields in CRB Register C @@ -674,8 +674,8 @@ typedef union icrbc_s { u64 rsvd: 6, sleep: 1, pricnt: 4, /* Priority count sent with Read req */ - pripsc: 4, /* Priority Pre scalar */ - bteop: 1, /* BTE Operation */ + pripsc: 4, /* Priority Pre scalar */ + bteop: 1, /* BTE Operation */ push_be: 34, /* Push address Byte enable * Holds push addr, if CRB is for BTE * If CRB belongs to Partial cache, @@ -684,20 +684,20 @@ typedef union icrbc_s { */ suppl: 11, /* Supplemental field */ barrop: 1, /* Barrier Op bit set in xtalk req */ - doresp: 1, /* Xtalk req needs a response */ - gbr: 1; /* GBR bit set in xtalk packet */ + doresp: 1, /* Xtalk req needs a response */ + gbr: 1; /* GBR bit set in xtalk packet */ } icrbc_field_s; } icrbc_t; -#define c_pricnt icrbc_field_s.pricnt -#define c_pripsc icrbc_field_s.pripsc -#define c_bteop icrbc_field_s.bteop -#define c_bteaddr icrbc_field_s.push_be /* push_be field has 2 names */ -#define c_benable icrbc_field_s.push_be /* push_be field has 2 names */ -#define c_suppl icrbc_field_s.suppl -#define c_barrop icrbc_field_s.barrop -#define c_doresp icrbc_field_s.doresp -#define c_gbr icrbc_field_s.gbr +#define c_pricnt icrbc_field_s.pricnt +#define c_pripsc icrbc_field_s.pripsc +#define c_bteop icrbc_field_s.bteop +#define c_bteaddr icrbc_field_s.push_be /* push_be field has 2 names */ +#define c_benable icrbc_field_s.push_be /* push_be field has 2 names */ +#define c_suppl icrbc_field_s.suppl +#define c_barrop icrbc_field_s.barrop +#define c_doresp icrbc_field_s.doresp +#define c_gbr icrbc_field_s.gbr #endif /* !__ASSEMBLY__ */ /* @@ -708,31 +708,31 @@ typedef union icrbc_s { typedef union icrbd_s { u64 reg_value; struct { - u64 rsvd: 38, + u64 rsvd: 38, toutvld: 1, /* Timeout in progress for this CRB */ - ctxtvld: 1, /* Context field below is valid */ + ctxtvld: 1, /* Context field below is valid */ rsvd2: 1, - context: 15, /* Bit vector: + context: 15, /* Bit vector: * Has a bit set for each CRB entry * which needs to be deallocated * before this CRB entry is processed. * Set only for barrier operations. */ - timeout: 8; /* Timeout Upper 8 bits */ + timeout: 8; /* Timeout Upper 8 bits */ } icrbd_field_s; } icrbd_t; -#define icrbd_toutvld icrbd_field_s.toutvld -#define icrbd_ctxtvld icrbd_field_s.ctxtvld -#define icrbd_context icrbd_field_s.context +#define icrbd_toutvld icrbd_field_s.toutvld +#define icrbd_ctxtvld icrbd_field_s.ctxtvld +#define icrbd_context icrbd_field_s.context typedef union hubii_ifdr_u { u64 hi_ifdr_value; struct { u64 ifdr_rsvd: 49, - ifdr_maxrp: 7, - ifdr_rsvd1: 1, + ifdr_maxrp: 7, + ifdr_rsvd1: 1, ifdr_maxrq: 7; } hi_ifdr_fields; } hubii_ifdr_t; @@ -789,26 +789,26 @@ typedef union hubii_ifdr_u { typedef union iprte_a { u64 entry; struct { - u64 rsvd1 : 7, /* Reserved field */ - valid : 1, /* Maps to a timeout entry */ - rsvd2 : 1, - srcnode : 9, /* Node which did this PIO */ - initiator : 2, /* If T5A or T5B or IO */ - rsvd3 : 3, - addr : 38, /* Physical address of PIO */ - rsvd4 : 3; + u64 rsvd1 : 7, /* Reserved field */ + valid : 1, /* Maps to a timeout entry */ + rsvd2 : 1, + srcnode : 9, /* Node which did this PIO */ + initiator : 2, /* If T5A or T5B or IO */ + rsvd3 : 3, + addr : 38, /* Physical address of PIO */ + rsvd4 : 3; } iprte_fields; } iprte_a_t; -#define iprte_valid iprte_fields.valid -#define iprte_timeout iprte_fields.timeout -#define iprte_srcnode iprte_fields.srcnode -#define iprte_init iprte_fields.initiator -#define iprte_addr iprte_fields.addr +#define iprte_valid iprte_fields.valid +#define iprte_timeout iprte_fields.timeout +#define iprte_srcnode iprte_fields.srcnode +#define iprte_init iprte_fields.initiator +#define iprte_addr iprte_fields.addr #endif /* !__ASSEMBLY__ */ -#define IPRTE_ADDRSHFT 3 +#define IPRTE_ADDRSHFT 3 /* * Hub IIO PRB Register format. @@ -823,14 +823,14 @@ typedef union iprte_a { typedef union iprb_u { u64 reg_value; struct { - u64 rsvd1: 15, + u64 rsvd1: 15, error: 1, /* Widget rcvd wr resp pkt w/ error */ - ovflow: 5, /* Overflow count. perf measurement */ + ovflow: 5, /* Overflow count. perf measurement */ fire_and_forget: 1, /* Launch Write without response */ mode: 2, /* Widget operation Mode */ rsvd2: 2, bnakctr: 14, - rsvd3: 2, + rsvd3: 2, anakctr: 14, xtalkctr: 8; } iprb_fields_s; @@ -838,13 +838,13 @@ typedef union iprb_u { #define iprb_regval reg_value -#define iprb_error iprb_fields_s.error -#define iprb_ovflow iprb_fields_s.ovflow -#define iprb_ff iprb_fields_s.fire_and_forget -#define iprb_mode iprb_fields_s.mode -#define iprb_bnakctr iprb_fields_s.bnakctr -#define iprb_anakctr iprb_fields_s.anakctr -#define iprb_xtalkctr iprb_fields_s.xtalkctr +#define iprb_error iprb_fields_s.error +#define iprb_ovflow iprb_fields_s.ovflow +#define iprb_ff iprb_fields_s.fire_and_forget +#define iprb_mode iprb_fields_s.mode +#define iprb_bnakctr iprb_fields_s.bnakctr +#define iprb_anakctr iprb_fields_s.anakctr +#define iprb_xtalkctr iprb_fields_s.xtalkctr #endif /* !__ASSEMBLY__ */ @@ -853,10 +853,10 @@ typedef union iprb_u { * For details of the meanings of NAK and Accept, refer the PIO flow * document */ -#define IPRB_MODE_NORMAL (0) -#define IPRB_MODE_COLLECT_A (1) /* PRB in collect A mode */ -#define IPRB_MODE_SERVICE_A (2) /* NAK B and Accept A */ -#define IPRB_MODE_SERVICE_B (3) /* NAK A and Accept B */ +#define IPRB_MODE_NORMAL (0) +#define IPRB_MODE_COLLECT_A (1) /* PRB in collect A mode */ +#define IPRB_MODE_SERVICE_A (2) /* NAK B and Accept A */ +#define IPRB_MODE_SERVICE_B (3) /* NAK A and Accept B */ /* * IO CRB entry C_A to E_A : Partial (cache) CRBS @@ -865,31 +865,31 @@ typedef union iprb_u { typedef union icrbp_a { u64 ip_reg; /* the entire register value */ struct { - u64 error: 1, /* 63, error occurred */ - ln_uce: 1, /* 62: uncorrectable memory */ - ln_ae: 1, /* 61: protection violation */ - ln_werr:1, /* 60: write access error */ - ln_aerr:1, /* 59: sn0net: Address error */ - ln_perr:1, /* 58: sn0net: poison error */ - timeout:1, /* 57: CRB timed out */ - l_bdpkt:1, /* 56: truncated pkt on sn0net */ - c_bdpkt:1, /* 55: truncated pkt on xtalk */ - c_err: 1, /* 54: incoming xtalk req, err set*/ + u64 error: 1, /* 63, error occurred */ + ln_uce: 1, /* 62: uncorrectable memory */ + ln_ae: 1, /* 61: protection violation */ + ln_werr:1, /* 60: write access error */ + ln_aerr:1, /* 59: sn0net: Address error */ + ln_perr:1, /* 58: sn0net: poison error */ + timeout:1, /* 57: CRB timed out */ + l_bdpkt:1, /* 56: truncated pkt on sn0net */ + c_bdpkt:1, /* 55: truncated pkt on xtalk */ + c_err: 1, /* 54: incoming xtalk req, err set*/ rsvd1: 12, /* 53-42: reserved */ - valid: 1, /* 41: Valid status */ + valid: 1, /* 41: Valid status */ sidn: 4, /* 40-37: SIDN field of xtalk rqst */ tnum: 5, /* 36-32: TNUM of xtalk request */ - bo: 1, /* 31: barrier op set in xtalk rqst*/ - resprqd:1, /* 30: xtalk rqst requires response*/ - gbr: 1, /* 29: gbr bit set in xtalk rqst */ + bo: 1, /* 31: barrier op set in xtalk rqst*/ + resprqd:1, /* 30: xtalk rqst requires response*/ + gbr: 1, /* 29: gbr bit set in xtalk rqst */ size: 2, /* 28-27: size of xtalk request */ excl: 4, /* 26-23: exclusive bit(s) */ stall: 3, /* 22-20: stall (xtalk, bte 0/1) */ - intvn: 1, /* 19: rqst target of intervention*/ - resp: 1, /* 18: Data response given to t5 */ - ack: 1, /* 17: Data ack received. */ - hold: 1, /* 16: crb gathering invalidate acks*/ - wb: 1, /* 15: writeback pending. */ + intvn: 1, /* 19: rqst target of intervention*/ + resp: 1, /* 18: Data response given to t5 */ + ack: 1, /* 17: Data ack received. */ + hold: 1, /* 16: crb gathering invalidate acks*/ + wb: 1, /* 15: writeback pending. */ ack_cnt:11, /* 14-04: counter of invalidate acks*/ tscaler:4; /* 03-00: Timeout prescaler */ } ip_fmt; @@ -908,13 +908,13 @@ typedef union hubii_idsr { u64 iin_reg; struct { u64 rsvd1 : 35, - isent : 1, - rsvd2 : 3, - ienable: 1, - rsvd : 7, - node : 9, - rsvd4 : 1, - level : 7; + isent : 1, + rsvd2 : 3, + ienable: 1, + rsvd : 7, + node : 9, + rsvd4 : 1, + level : 7; } iin_fmt; } hubii_idsr_t; #endif /* !__ASSEMBLY__ */ @@ -966,7 +966,7 @@ typedef union hubii_idsr { * Value of 3 is required by Xbow 1.1 * We may be able to increase this to 4 with Xbow 1.2. */ -#define HUBII_XBOW_CREDIT 3 +#define HUBII_XBOW_CREDIT 3 #define HUBII_XBOW_REV2_CREDIT 4 #endif /* _ASM_SGI_SN_SN0_HUBIO_H */ diff --git a/arch/mips/include/asm/sn/sn0/hubmd.h b/arch/mips/include/asm/sn/sn0/hubmd.h index 14c225d..305d002 100644 --- a/arch/mips/include/asm/sn/sn0/hubmd.h +++ b/arch/mips/include/asm/sn/sn0/hubmd.h @@ -8,16 +8,16 @@ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. * Copyright (C) 1999 by Ralf Baechle */ -#ifndef _ASM_SN_SN0_HUBMD_H -#define _ASM_SN_SN0_HUBMD_H +#ifndef _ASM_SN_SN0_HUBMD_H +#define _ASM_SN_SN0_HUBMD_H /* * Hub Memory/Directory interface registers */ -#define CACHE_SLINE_SIZE 128 /* Secondary cache line size on SN0 */ +#define CACHE_SLINE_SIZE 128 /* Secondary cache line size on SN0 */ -#define MAX_REGIONS 64 +#define MAX_REGIONS 64 /* Hardware page size and shift */ @@ -34,62 +34,62 @@ #define MD_IO_PROT_OVRRD 0x200008 /* Clear my bit in MD_IO_PROTECT */ #define MD_HSPEC_PROTECT 0x200010 /* BDDIR, LBOOT, RBOOT protection */ #define MD_MEMORY_CONFIG 0x200018 /* Memory/Directory DIMM control */ -#define MD_REFRESH_CONTROL 0x200020 /* Memory/Directory refresh ctrl */ -#define MD_FANDOP_CAC_STAT 0x200028 /* Fetch-and-op cache status */ -#define MD_MIG_DIFF_THRESH 0x200030 /* Page migr. count diff thresh. */ -#define MD_MIG_VALUE_THRESH 0x200038 /* Page migr. count abs. thresh. */ -#define MD_MIG_CANDIDATE 0x200040 /* Latest page migration candidate */ -#define MD_MIG_CANDIDATE_CLR 0x200048 /* Clear page migration candidate */ -#define MD_DIR_ERROR 0x200050 /* Directory DIMM error */ -#define MD_DIR_ERROR_CLR 0x200058 /* Directory DIMM error clear */ -#define MD_PROTOCOL_ERROR 0x200060 /* Directory protocol error */ +#define MD_REFRESH_CONTROL 0x200020 /* Memory/Directory refresh ctrl */ +#define MD_FANDOP_CAC_STAT 0x200028 /* Fetch-and-op cache status */ +#define MD_MIG_DIFF_THRESH 0x200030 /* Page migr. count diff thresh. */ +#define MD_MIG_VALUE_THRESH 0x200038 /* Page migr. count abs. thresh. */ +#define MD_MIG_CANDIDATE 0x200040 /* Latest page migration candidate */ +#define MD_MIG_CANDIDATE_CLR 0x200048 /* Clear page migration candidate */ +#define MD_DIR_ERROR 0x200050 /* Directory DIMM error */ +#define MD_DIR_ERROR_CLR 0x200058 /* Directory DIMM error clear */ +#define MD_PROTOCOL_ERROR 0x200060 /* Directory protocol error */ #define MD_PROTOCOL_ERROR_CLR 0x200068 /* Directory protocol error clear */ -#define MD_MEM_ERROR 0x200070 /* Memory DIMM error */ -#define MD_MEM_ERROR_CLR 0x200078 /* Memory DIMM error clear */ -#define MD_MISC_ERROR 0x200080 /* Miscellaneous MD error */ +#define MD_MEM_ERROR 0x200070 /* Memory DIMM error */ +#define MD_MEM_ERROR_CLR 0x200078 /* Memory DIMM error clear */ +#define MD_MISC_ERROR 0x200080 /* Miscellaneous MD error */ #define MD_MISC_ERROR_CLR 0x200088 /* Miscellaneous MD error clear */ #define MD_MEM_DIMM_INIT 0x200090 /* Memory DIMM mode initization. */ -#define MD_DIR_DIMM_INIT 0x200098 /* Directory DIMM mode init. */ -#define MD_MOQ_SIZE 0x2000a0 /* MD outgoing queue size */ +#define MD_DIR_DIMM_INIT 0x200098 /* Directory DIMM mode init. */ +#define MD_MOQ_SIZE 0x2000a0 /* MD outgoing queue size */ #define MD_MLAN_CTL 0x2000a8 /* NIC (Microlan) control register */ -#define MD_PERF_SEL 0x210000 /* Select perf monitor events */ -#define MD_PERF_CNT0 0x210010 /* Performance counter 0 */ -#define MD_PERF_CNT1 0x210018 /* Performance counter 1 */ -#define MD_PERF_CNT2 0x210020 /* Performance counter 2 */ -#define MD_PERF_CNT3 0x210028 /* Performance counter 3 */ -#define MD_PERF_CNT4 0x210030 /* Performance counter 4 */ -#define MD_PERF_CNT5 0x210038 /* Performance counter 5 */ - -#define MD_UREG0_0 0x220000 /* uController/UART 0 register */ -#define MD_UREG0_1 0x220008 /* uController/UART 0 register */ -#define MD_UREG0_2 0x220010 /* uController/UART 0 register */ -#define MD_UREG0_3 0x220018 /* uController/UART 0 register */ -#define MD_UREG0_4 0x220020 /* uController/UART 0 register */ -#define MD_UREG0_5 0x220028 /* uController/UART 0 register */ -#define MD_UREG0_6 0x220030 /* uController/UART 0 register */ -#define MD_UREG0_7 0x220038 /* uController/UART 0 register */ +#define MD_PERF_SEL 0x210000 /* Select perf monitor events */ +#define MD_PERF_CNT0 0x210010 /* Performance counter 0 */ +#define MD_PERF_CNT1 0x210018 /* Performance counter 1 */ +#define MD_PERF_CNT2 0x210020 /* Performance counter 2 */ +#define MD_PERF_CNT3 0x210028 /* Performance counter 3 */ +#define MD_PERF_CNT4 0x210030 /* Performance counter 4 */ +#define MD_PERF_CNT5 0x210038 /* Performance counter 5 */ + +#define MD_UREG0_0 0x220000 /* uController/UART 0 register */ +#define MD_UREG0_1 0x220008 /* uController/UART 0 register */ +#define MD_UREG0_2 0x220010 /* uController/UART 0 register */ +#define MD_UREG0_3 0x220018 /* uController/UART 0 register */ +#define MD_UREG0_4 0x220020 /* uController/UART 0 register */ +#define MD_UREG0_5 0x220028 /* uController/UART 0 register */ +#define MD_UREG0_6 0x220030 /* uController/UART 0 register */ +#define MD_UREG0_7 0x220038 /* uController/UART 0 register */ #define MD_SLOTID_USTAT 0x220048 /* Hub slot ID & UART/uCtlr status */ -#define MD_LED0 0x220050 /* Eight-bit LED for CPU A */ -#define MD_LED1 0x220058 /* Eight-bit LED for CPU B */ - -#define MD_UREG1_0 0x220080 /* uController/UART 1 register */ -#define MD_UREG1_1 0x220088 /* uController/UART 1 register */ -#define MD_UREG1_2 0x220090 /* uController/UART 1 register */ -#define MD_UREG1_3 0x220098 /* uController/UART 1 register */ -#define MD_UREG1_4 0x2200a0 /* uController/UART 1 register */ -#define MD_UREG1_5 0x2200a8 /* uController/UART 1 register */ -#define MD_UREG1_6 0x2200b0 /* uController/UART 1 register */ -#define MD_UREG1_7 0x2200b8 /* uController/UART 1 register */ -#define MD_UREG1_8 0x2200c0 /* uController/UART 1 register */ -#define MD_UREG1_9 0x2200c8 /* uController/UART 1 register */ -#define MD_UREG1_10 0x2200d0 /* uController/UART 1 register */ -#define MD_UREG1_11 0x2200d8 /* uController/UART 1 register */ -#define MD_UREG1_12 0x2200e0 /* uController/UART 1 register */ -#define MD_UREG1_13 0x2200e8 /* uController/UART 1 register */ -#define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */ -#define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */ +#define MD_LED0 0x220050 /* Eight-bit LED for CPU A */ +#define MD_LED1 0x220058 /* Eight-bit LED for CPU B */ + +#define MD_UREG1_0 0x220080 /* uController/UART 1 register */ +#define MD_UREG1_1 0x220088 /* uController/UART 1 register */ +#define MD_UREG1_2 0x220090 /* uController/UART 1 register */ +#define MD_UREG1_3 0x220098 /* uController/UART 1 register */ +#define MD_UREG1_4 0x2200a0 /* uController/UART 1 register */ +#define MD_UREG1_5 0x2200a8 /* uController/UART 1 register */ +#define MD_UREG1_6 0x2200b0 /* uController/UART 1 register */ +#define MD_UREG1_7 0x2200b8 /* uController/UART 1 register */ +#define MD_UREG1_8 0x2200c0 /* uController/UART 1 register */ +#define MD_UREG1_9 0x2200c8 /* uController/UART 1 register */ +#define MD_UREG1_10 0x2200d0 /* uController/UART 1 register */ +#define MD_UREG1_11 0x2200d8 /* uController/UART 1 register */ +#define MD_UREG1_12 0x2200e0 /* uController/UART 1 register */ +#define MD_UREG1_13 0x2200e8 /* uController/UART 1 register */ +#define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */ +#define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */ #ifdef CONFIG_SGI_SN_N_MODE #define MD_MEM_BANKS 4 /* 4 banks of memory max in N mode */ @@ -106,14 +106,14 @@ * Bits not used by the MD are used by software. */ -#define MD_SIZE_EMPTY 0 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_EMPTY 0 /* Valid in MEMORY_CONFIG */ #define MD_SIZE_8MB 1 #define MD_SIZE_16MB 2 #define MD_SIZE_32MB 3 /* Broken in Hub 1 */ -#define MD_SIZE_64MB 4 /* Valid in MEMORY_CONFIG */ -#define MD_SIZE_128MB 5 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_64MB 4 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_128MB 5 /* Valid in MEMORY_CONFIG */ #define MD_SIZE_256MB 6 -#define MD_SIZE_512MB 7 /* Valid in MEMORY_CONFIG */ +#define MD_SIZE_512MB 7 /* Valid in MEMORY_CONFIG */ #define MD_SIZE_1GB 8 #define MD_SIZE_2GB 9 #define MD_SIZE_4GB 10 @@ -207,16 +207,16 @@ /* MD_SLOTID_USTAT bit definitions */ -#define MSU_CORECLK_TST_SHFT 7 /* You don't wanna know */ +#define MSU_CORECLK_TST_SHFT 7 /* You don't wanna know */ #define MSU_CORECLK_TST_MASK (UINT64_CAST 1 << 7) #define MSU_CORECLK_TST (UINT64_CAST 1 << 7) -#define MSU_CORECLK_SHFT 6 /* You don't wanna know */ +#define MSU_CORECLK_SHFT 6 /* You don't wanna know */ #define MSU_CORECLK_MASK (UINT64_CAST 1 << 6) #define MSU_CORECLK (UINT64_CAST 1 << 6) -#define MSU_NETSYNC_SHFT 5 /* You don't wanna know */ +#define MSU_NETSYNC_SHFT 5 /* You don't wanna know */ #define MSU_NETSYNC_MASK (UINT64_CAST 1 << 5) #define MSU_NETSYNC (UINT64_CAST 1 << 5) -#define MSU_FPROMRDY_SHFT 4 /* Flash PROM ready bit */ +#define MSU_FPROMRDY_SHFT 4 /* Flash PROM ready bit */ #define MSU_FPROMRDY_MASK (UINT64_CAST 1 << 4) #define MSU_FPROMRDY (UINT64_CAST 1 << 4) #define MSU_I2CINTR_SHFT 3 /* I2C interrupt bit */ @@ -228,8 +228,8 @@ #define MSU_SN00_SLOTID_SHFT 7 #define MSU_SN00_SLOTID_MASK (UINT64_CAST 0x80) -#define MSU_PIMM_PSC_SHFT 4 -#define MSU_PIMM_PSC_MASK (0xf << MSU_PIMM_PSC_SHFT) +#define MSU_PIMM_PSC_SHFT 4 +#define MSU_PIMM_PSC_MASK (0xf << MSU_PIMM_PSC_SHFT) /* MD_MIG_DIFF_THRESH bit definitions */ @@ -260,7 +260,7 @@ /* Other MD definitions */ -#define MD_BANK_SHFT 29 /* log2(512 MB) */ +#define MD_BANK_SHFT 29 /* log2(512 MB) */ #define MD_BANK_MASK (UINT64_CAST 7 << 29) #define MD_BANK_SIZE (UINT64_CAST 1 << MD_BANK_SHFT) /* 512 MB */ #define MD_BANK_OFFSET(_b) (UINT64_CAST (_b) << MD_BANK_SHFT) @@ -300,32 +300,32 @@ * Format C: STATE != shared (FINE must be 0) */ -#define MD_PDIR_MASK 0xffffffffffff /* Whole entry */ +#define MD_PDIR_MASK 0xffffffffffff /* Whole entry */ #define MD_PDIR_ECC_SHFT 0 /* ABC low or high */ #define MD_PDIR_ECC_MASK 0x7f -#define MD_PDIR_PRIO_SHFT 8 /* ABC low */ +#define MD_PDIR_PRIO_SHFT 8 /* ABC low */ #define MD_PDIR_PRIO_MASK (0xf << 8) -#define MD_PDIR_AX_SHFT 7 /* ABC low */ +#define MD_PDIR_AX_SHFT 7 /* ABC low */ #define MD_PDIR_AX_MASK (1 << 7) #define MD_PDIR_AX (1 << 7) -#define MD_PDIR_FINE_SHFT 12 /* ABC low */ +#define MD_PDIR_FINE_SHFT 12 /* ABC low */ #define MD_PDIR_FINE_MASK (1 << 12) #define MD_PDIR_FINE (1 << 12) -#define MD_PDIR_OCT_SHFT 13 /* A low */ +#define MD_PDIR_OCT_SHFT 13 /* A low */ #define MD_PDIR_OCT_MASK (7 << 13) -#define MD_PDIR_STATE_SHFT 13 /* BC low */ +#define MD_PDIR_STATE_SHFT 13 /* BC low */ #define MD_PDIR_STATE_MASK (7 << 13) -#define MD_PDIR_ONECNT_SHFT 16 /* BC low */ +#define MD_PDIR_ONECNT_SHFT 16 /* BC low */ #define MD_PDIR_ONECNT_MASK (0x3f << 16) -#define MD_PDIR_PTR_SHFT 22 /* C low */ +#define MD_PDIR_PTR_SHFT 22 /* C low */ #define MD_PDIR_PTR_MASK (UINT64_CAST 0x7ff << 22) -#define MD_PDIR_VECMSB_SHFT 22 /* AB low */ +#define MD_PDIR_VECMSB_SHFT 22 /* AB low */ #define MD_PDIR_VECMSB_BITMASK 0x3ffffff #define MD_PDIR_VECMSB_BITSHFT 27 #define MD_PDIR_VECMSB_MASK (UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22) -#define MD_PDIR_CWOFF_SHFT 7 /* C high */ +#define MD_PDIR_CWOFF_SHFT 7 /* C high */ #define MD_PDIR_CWOFF_MASK (7 << 7) -#define MD_PDIR_VECLSB_SHFT 10 /* AB high */ +#define MD_PDIR_VECLSB_SHFT 10 /* AB high */ #define MD_PDIR_VECLSB_BITMASK (UINT64_CAST 0x3fffffffff) #define MD_PDIR_VECLSB_BITSHFT 0 #define MD_PDIR_VECLSB_MASK (MD_PDIR_VECLSB_BITMASK << 10) @@ -349,25 +349,25 @@ * Format C: STATE != shared */ -#define MD_SDIR_MASK 0xffff /* Whole entry */ +#define MD_SDIR_MASK 0xffff /* Whole entry */ #define MD_SDIR_ECC_SHFT 0 /* AC low or high */ #define MD_SDIR_ECC_MASK 0x1f -#define MD_SDIR_PRIO_SHFT 6 /* AC low */ +#define MD_SDIR_PRIO_SHFT 6 /* AC low */ #define MD_SDIR_PRIO_MASK (1 << 6) -#define MD_SDIR_AX_SHFT 5 /* AC low */ +#define MD_SDIR_AX_SHFT 5 /* AC low */ #define MD_SDIR_AX_MASK (1 << 5) #define MD_SDIR_AX (1 << 5) -#define MD_SDIR_STATE_SHFT 7 /* AC low */ +#define MD_SDIR_STATE_SHFT 7 /* AC low */ #define MD_SDIR_STATE_MASK (7 << 7) -#define MD_SDIR_PTR_SHFT 10 /* C low */ +#define MD_SDIR_PTR_SHFT 10 /* C low */ #define MD_SDIR_PTR_MASK (0x3f << 10) -#define MD_SDIR_CWOFF_SHFT 5 /* C high */ +#define MD_SDIR_CWOFF_SHFT 5 /* C high */ #define MD_SDIR_CWOFF_MASK (7 << 5) -#define MD_SDIR_VECMSB_SHFT 11 /* A low */ +#define MD_SDIR_VECMSB_SHFT 11 /* A low */ #define MD_SDIR_VECMSB_BITMASK 0x1f #define MD_SDIR_VECMSB_BITSHFT 7 #define MD_SDIR_VECMSB_MASK (MD_SDIR_VECMSB_BITMASK << 11) -#define MD_SDIR_VECLSB_SHFT 5 /* A high */ +#define MD_SDIR_VECLSB_SHFT 5 /* A high */ #define MD_SDIR_VECLSB_BITMASK 0x7ff #define MD_SDIR_VECLSB_BITSHFT 0 #define MD_SDIR_VECLSB_MASK (MD_SDIR_VECLSB_BITMASK << 5) @@ -390,7 +390,7 @@ /* Premium SIMM protection entry shifts and masks. */ -#define MD_PPROT_SHFT 0 /* Prot. field */ +#define MD_PPROT_SHFT 0 /* Prot. field */ #define MD_PPROT_MASK 7 #define MD_PPROT_MIGMD_SHFT 3 /* Migration mode */ #define MD_PPROT_MIGMD_MASK (3 << 3) @@ -403,7 +403,7 @@ /* Standard SIMM protection entry shifts and masks. */ -#define MD_SPROT_SHFT 0 /* Prot. field */ +#define MD_SPROT_SHFT 0 /* Prot. field */ #define MD_SPROT_MASK 7 #define MD_SPROT_MIGMD_SHFT 3 /* Migration mode */ #define MD_SPROT_MIGMD_MASK (3 << 3) @@ -431,13 +431,13 @@ #define CPU_LED_ADDR(_nasid, _slice) \ (private.p_sn00 ? \ - REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 + ((_slice) << 5)) : \ + REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 + ((_slice) << 5)) : \ REMOTE_HUB_ADDR((_nasid), MD_LED0 + ((_slice) << 3))) #define SET_CPU_LEDS(_nasid, _slice, _val) \ (HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val))) -#define SET_MY_LEDS(_v) \ +#define SET_MY_LEDS(_v) \ SET_CPU_LEDS(get_nasid(), get_slice(), (_v)) /* @@ -541,7 +541,7 @@ */ struct dir_error_reg { - u64 uce_vld: 1, /* 63: valid directory uce */ + u64 uce_vld: 1, /* 63: valid directory uce */ ae_vld: 1, /* 62: valid dir prot ecc error */ ce_vld: 1, /* 61: valid correctable ECC err*/ rsvd1: 19, /* 60-42: reserved */ @@ -555,13 +555,13 @@ struct dir_error_reg { }; typedef union md_dir_error { - u64 derr_reg; /* the entire register */ + u64 derr_reg; /* the entire register */ struct dir_error_reg derr_fmt; /* the register format */ } md_dir_error_t; struct mem_error_reg { - u64 uce_vld: 1, /* 63: valid memory uce */ + u64 uce_vld: 1, /* 63: valid memory uce */ ce_vld: 1, /* 62: valid correctable ECC err*/ rsvd1: 22, /* 61-40: reserved */ bad_syn: 8, /* 39-32: bad mem ecc syndrome */ @@ -573,8 +573,8 @@ struct mem_error_reg { typedef union md_mem_error { - u64 merr_reg; /* the entire register */ - struct mem_error_reg merr_fmt; /* format of the mem_error reg */ + u64 merr_reg; /* the entire register */ + struct mem_error_reg merr_fmt; /* format of the mem_error reg */ } md_mem_error_t; @@ -594,7 +594,7 @@ struct proto_error_reg { }; typedef union md_proto_error { - u64 perr_reg; /* the entire register */ + u64 perr_reg; /* the entire register */ struct proto_error_reg perr_fmt; /* format of the register */ } md_proto_error_t; @@ -695,33 +695,33 @@ typedef union md_pdir_loent { * represent directory memory information. */ -typedef union md_dir_high { - md_sdir_high_t md_sdir_high; - md_pdir_high_t md_pdir_high; +typedef union md_dir_high { + md_sdir_high_t md_sdir_high; + md_pdir_high_t md_pdir_high; } md_dir_high_t; -typedef union md_dir_low { - md_sdir_low_t md_sdir_low; - md_pdir_low_t md_pdir_low; +typedef union md_dir_low { + md_sdir_low_t md_sdir_low; + md_pdir_low_t md_pdir_low; } md_dir_low_t; -typedef struct bddir_entry { - md_dir_low_t md_dir_low; - md_dir_high_t md_dir_high; +typedef struct bddir_entry { + md_dir_low_t md_dir_low; + md_dir_high_t md_dir_high; } bddir_entry_t; typedef struct dir_mem_entry { - u64 prcpf[MAX_REGIONS]; - bddir_entry_t directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE]; + u64 prcpf[MAX_REGIONS]; + bddir_entry_t directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE]; } dir_mem_entry_t; typedef union md_perf_sel { - u64 perf_sel_reg; + u64 perf_sel_reg; struct { u64 perf_rsvd : 60, - perf_en : 1, + perf_en : 1, perf_sel : 3; } perf_sel_bits; } md_perf_sel_t; @@ -730,7 +730,7 @@ typedef union md_perf_cnt { u64 perf_cnt; struct { u64 perf_rsvd : 44, - perf_cnt : 20; + perf_cnt : 20; } perf_cnt_bits; } md_perf_cnt_t; diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h index b40d3ef..b73c4be 100644 --- a/arch/mips/include/asm/sn/sn0/hubni.h +++ b/arch/mips/include/asm/sn/sn0/hubni.h @@ -25,38 +25,38 @@ #define NI_BASE_TABLES 0x630000 #define NI_STATUS_REV_ID 0x600000 /* Hub network status, rev, and ID */ -#define NI_PORT_RESET 0x600008 /* Reset the network interface */ +#define NI_PORT_RESET 0x600008 /* Reset the network interface */ #define NI_PROTECTION 0x600010 /* NI register access permissions */ -#define NI_GLOBAL_PARMS 0x600018 /* LLP parameters */ +#define NI_GLOBAL_PARMS 0x600018 /* LLP parameters */ #define NI_SCRATCH_REG0 0x600100 /* Scratch register 0 (64 bits) */ #define NI_SCRATCH_REG1 0x600108 /* Scratch register 1 (64 bits) */ #define NI_DIAG_PARMS 0x600110 /* Parameters for diags */ #define NI_VECTOR_PARMS 0x600200 /* Vector PIO routing parameters */ -#define NI_VECTOR 0x600208 /* Vector PIO route */ -#define NI_VECTOR_DATA 0x600210 /* Vector PIO data */ -#define NI_VECTOR_STATUS 0x600300 /* Vector PIO return status */ -#define NI_RETURN_VECTOR 0x600308 /* Vector PIO return vector */ -#define NI_VECTOR_READ_DATA 0x600310 /* Vector PIO read data */ +#define NI_VECTOR 0x600208 /* Vector PIO route */ +#define NI_VECTOR_DATA 0x600210 /* Vector PIO data */ +#define NI_VECTOR_STATUS 0x600300 /* Vector PIO return status */ +#define NI_RETURN_VECTOR 0x600308 /* Vector PIO return vector */ +#define NI_VECTOR_READ_DATA 0x600310 /* Vector PIO read data */ #define NI_VECTOR_CLEAR 0x600380 /* Vector PIO read & clear status */ -#define NI_IO_PROTECT 0x600400 /* PIO protection bits */ -#define NI_IO_PROT_OVRRD 0x600408 /* PIO protection bit override */ - -#define NI_AGE_CPU0_MEMORY 0x600500 /* CPU 0 memory age control */ -#define NI_AGE_CPU0_PIO 0x600508 /* CPU 0 PIO age control */ -#define NI_AGE_CPU1_MEMORY 0x600510 /* CPU 1 memory age control */ -#define NI_AGE_CPU1_PIO 0x600518 /* CPU 1 PIO age control */ -#define NI_AGE_GBR_MEMORY 0x600520 /* GBR memory age control */ -#define NI_AGE_GBR_PIO 0x600528 /* GBR PIO age control */ -#define NI_AGE_IO_MEMORY 0x600530 /* IO memory age control */ -#define NI_AGE_IO_PIO 0x600538 /* IO PIO age control */ +#define NI_IO_PROTECT 0x600400 /* PIO protection bits */ +#define NI_IO_PROT_OVRRD 0x600408 /* PIO protection bit override */ + +#define NI_AGE_CPU0_MEMORY 0x600500 /* CPU 0 memory age control */ +#define NI_AGE_CPU0_PIO 0x600508 /* CPU 0 PIO age control */ +#define NI_AGE_CPU1_MEMORY 0x600510 /* CPU 1 memory age control */ +#define NI_AGE_CPU1_PIO 0x600518 /* CPU 1 PIO age control */ +#define NI_AGE_GBR_MEMORY 0x600520 /* GBR memory age control */ +#define NI_AGE_GBR_PIO 0x600528 /* GBR PIO age control */ +#define NI_AGE_IO_MEMORY 0x600530 /* IO memory age control */ +#define NI_AGE_IO_PIO 0x600538 /* IO PIO age control */ #define NI_AGE_REG_MIN NI_AGE_CPU0_MEMORY #define NI_AGE_REG_MAX NI_AGE_IO_PIO -#define NI_PORT_PARMS 0x608000 /* LLP Parameters */ -#define NI_PORT_ERROR 0x608008 /* LLP Errors */ -#define NI_PORT_ERROR_CLEAR 0x608088 /* Clear the error bits */ +#define NI_PORT_PARMS 0x608000 /* LLP Parameters */ +#define NI_PORT_ERROR 0x608008 /* LLP Errors */ +#define NI_PORT_ERROR_CLEAR 0x608088 /* Clear the error bits */ #define NI_META_TABLE0 0x638000 /* First meta routing table entry */ #define NI_META_TABLE(_x) (NI_META_TABLE0 + (8 * (_x))) @@ -76,13 +76,13 @@ #define NSRI_LINKUP_SHFT 29 #define NSRI_LINKUP_MASK (UINT64_CAST 0x1 << 29) #define NSRI_DOWNREASON_SHFT 28 /* 0=failed, 1=never came */ -#define NSRI_DOWNREASON_MASK (UINT64_CAST 0x1 << 28) /* out of reset. */ +#define NSRI_DOWNREASON_MASK (UINT64_CAST 0x1 << 28) /* out of reset. */ #define NSRI_MORENODES_SHFT 18 #define NSRI_MORENODES_MASK (UINT64_CAST 1 << 18) /* Max. # of nodes */ #define MORE_MEMORY 0 #define MORE_NODES 1 #define NSRI_REGIONSIZE_SHFT 17 -#define NSRI_REGIONSIZE_MASK (UINT64_CAST 1 << 17) /* Granularity */ +#define NSRI_REGIONSIZE_MASK (UINT64_CAST 1 << 17) /* Granularity */ #define REGIONSIZE_FINE 1 #define REGIONSIZE_COARSE 0 #define NSRI_NODEID_SHFT 8 @@ -90,14 +90,14 @@ #define NSRI_REV_SHFT 4 #define NSRI_REV_MASK (UINT64_CAST 0xf << 4) /* Chip Revision */ #define NSRI_CHIPID_SHFT 0 -#define NSRI_CHIPID_MASK (UINT64_CAST 0xf) /* Chip type ID */ +#define NSRI_CHIPID_MASK (UINT64_CAST 0xf) /* Chip type ID */ /* - * In fine mode, each node is a region. In coarse mode, there are + * In fine mode, each node is a region. In coarse mode, there are * eight nodes per region. */ #define NASID_TO_FINEREG_SHFT 0 -#define NASID_TO_COARSEREG_SHFT 3 +#define NASID_TO_COARSEREG_SHFT 3 /* NI_PORT_RESET mask definitions */ @@ -111,21 +111,21 @@ /* NI_GLOBAL_PARMS mask and shift definitions */ -#define NGP_MAXRETRY_SHFT 48 /* Maximum retries */ +#define NGP_MAXRETRY_SHFT 48 /* Maximum retries */ #define NGP_MAXRETRY_MASK (UINT64_CAST 0x3ff << 48) -#define NGP_TAILTOWRAP_SHFT 32 /* Tail timeout wrap */ +#define NGP_TAILTOWRAP_SHFT 32 /* Tail timeout wrap */ #define NGP_TAILTOWRAP_MASK (UINT64_CAST 0xffff << 32) -#define NGP_CREDITTOVAL_SHFT 16 /* Tail timeout wrap */ +#define NGP_CREDITTOVAL_SHFT 16 /* Tail timeout wrap */ #define NGP_CREDITTOVAL_MASK (UINT64_CAST 0xf << 16) -#define NGP_TAILTOVAL_SHFT 4 /* Tail timeout value */ +#define NGP_TAILTOVAL_SHFT 4 /* Tail timeout value */ #define NGP_TAILTOVAL_MASK (UINT64_CAST 0xf << 4) /* NI_DIAG_PARMS mask and shift definitions */ #define NDP_PORTTORESET (UINT64_CAST 1 << 18) /* Port tmout reset */ #define NDP_LLP8BITMODE (UINT64_CAST 1 << 12) /* LLP 8-bit mode */ -#define NDP_PORTDISABLE (UINT64_CAST 1 << 6) /* Port disable */ +#define NDP_PORTDISABLE (UINT64_CAST 1 << 6) /* Port disable */ #define NDP_SENDERROR (UINT64_CAST 1) /* Send data error */ /* @@ -137,7 +137,7 @@ #define NVP_PIOID_MASK (UINT64_CAST 0x3ff << 40) #define NVP_WRITEID_SHFT 32 #define NVP_WRITEID_MASK (UINT64_CAST 0xff << 32) -#define NVP_ADDRESS_MASK (UINT64_CAST 0xffff8) /* Bits 19:3 */ +#define NVP_ADDRESS_MASK (UINT64_CAST 0xffff8) /* Bits 19:3 */ #define NVP_TYPE_SHFT 0 #define NVP_TYPE_MASK (UINT64_CAST 0x3) @@ -151,7 +151,7 @@ #define NVS_PIOID_MASK (UINT64_CAST 0x3ff << 40) #define NVS_WRITEID_SHFT 32 #define NVS_WRITEID_MASK (UINT64_CAST 0xff << 32) -#define NVS_ADDRESS_MASK (UINT64_CAST 0xfffffff8) /* Bits 31:3 */ +#define NVS_ADDRESS_MASK (UINT64_CAST 0xfffffff8) /* Bits 31:3 */ #define NVS_TYPE_SHFT 0 #define NVS_TYPE_MASK (UINT64_CAST 0x7) #define NVS_ERROR_MASK (UINT64_CAST 0x4) /* bit set means error */ @@ -161,10 +161,10 @@ #define PIOTYPE_WRITE 1 /* VECTOR_PARMS and VECTOR_STATUS */ #define PIOTYPE_UNDEFINED 2 /* VECTOR_PARMS and VECTOR_STATUS */ #define PIOTYPE_EXCHANGE 3 /* VECTOR_PARMS and VECTOR_STATUS */ -#define PIOTYPE_ADDR_ERR 4 /* VECTOR_STATUS only */ -#define PIOTYPE_CMD_ERR 5 /* VECTOR_STATUS only */ -#define PIOTYPE_PROT_ERR 6 /* VECTOR_STATUS only */ -#define PIOTYPE_UNKNOWN 7 /* VECTOR_STATUS only */ +#define PIOTYPE_ADDR_ERR 4 /* VECTOR_STATUS only */ +#define PIOTYPE_CMD_ERR 5 /* VECTOR_STATUS only */ +#define PIOTYPE_PROT_ERR 6 /* VECTOR_STATUS only */ +#define PIOTYPE_UNKNOWN 7 /* VECTOR_STATUS only */ /* NI_AGE_XXX mask and shift definitions */ @@ -215,7 +215,7 @@ #define NPE_FATAL_ERRORS (NPE_LINKRESET | NPE_INTERNALERROR | \ NPE_BADMESSAGE | NPE_BADDEST | \ - NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK | \ + NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK | \ NPE_TAILTO_MASK) /* NI_META_TABLE mask and shift definitions */ @@ -231,7 +231,7 @@ typedef union hubni_port_error_u { u64 nipe_reg_value; struct { - u64 nipe_rsvd: 26, /* unused */ + u64 nipe_rsvd: 26, /* unused */ nipe_lnk_reset: 1, /* link reset */ nipe_intl_err: 1, /* internal error */ nipe_bad_msg: 1, /* bad message */ diff --git a/arch/mips/include/asm/sn/sn0/hubpi.h b/arch/mips/include/asm/sn/sn0/hubpi.h index e39f5f9..7b83655 100644 --- a/arch/mips/include/asm/sn/sn0/hubpi.h +++ b/arch/mips/include/asm/sn/sn0/hubpi.h @@ -8,8 +8,8 @@ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. * Copyright (C) 1999 by Ralf Baechle */ -#ifndef _ASM_SN_SN0_HUBPI_H -#define _ASM_SN_SN0_HUBPI_H +#ifndef _ASM_SN_SN0_HUBPI_H +#define _ASM_SN_SN0_HUBPI_H #include <linux/types.h> @@ -25,13 +25,13 @@ /* General protection and control registers */ -#define PI_CPU_PROTECT 0x000000 /* CPU Protection */ -#define PI_PROT_OVERRD 0x000008 /* Clear CPU Protection bit */ -#define PI_IO_PROTECT 0x000010 /* Interrupt Pending Protection */ +#define PI_CPU_PROTECT 0x000000 /* CPU Protection */ +#define PI_PROT_OVERRD 0x000008 /* Clear CPU Protection bit */ +#define PI_IO_PROTECT 0x000010 /* Interrupt Pending Protection */ #define PI_REGION_PRESENT 0x000018 /* Indicates whether region exists */ -#define PI_CPU_NUM 0x000020 /* CPU Number ID */ -#define PI_CALIAS_SIZE 0x000028 /* Cached Alias Size */ -#define PI_MAX_CRB_TIMEOUT 0x000030 /* Maximum Timeout for CRB */ +#define PI_CPU_NUM 0x000020 /* CPU Number ID */ +#define PI_CALIAS_SIZE 0x000028 /* Cached Alias Size */ +#define PI_MAX_CRB_TIMEOUT 0x000030 /* Maximum Timeout for CRB */ #define PI_CRB_SFACTOR 0x000038 /* Scale factor for CRB timeout */ /* CALIAS values */ @@ -54,28 +54,28 @@ /* Processor control and status checking */ -#define PI_CPU_PRESENT_A 0x000040 /* CPU Present A */ -#define PI_CPU_PRESENT_B 0x000048 /* CPU Present B */ -#define PI_CPU_ENABLE_A 0x000050 /* CPU Enable A */ -#define PI_CPU_ENABLE_B 0x000058 /* CPU Enable B */ -#define PI_REPLY_LEVEL 0x000060 /* Reply Level */ +#define PI_CPU_PRESENT_A 0x000040 /* CPU Present A */ +#define PI_CPU_PRESENT_B 0x000048 /* CPU Present B */ +#define PI_CPU_ENABLE_A 0x000050 /* CPU Enable A */ +#define PI_CPU_ENABLE_B 0x000058 /* CPU Enable B */ +#define PI_REPLY_LEVEL 0x000060 /* Reply Level */ #define PI_HARDRESET_BIT 0x020068 /* Bit cleared by s/w on SR */ -#define PI_NMI_A 0x000070 /* NMI to CPU A */ -#define PI_NMI_B 0x000078 /* NMI to CPU B */ +#define PI_NMI_A 0x000070 /* NMI to CPU A */ +#define PI_NMI_B 0x000078 /* NMI to CPU B */ #define PI_NMI_OFFSET (PI_NMI_B - PI_NMI_A) -#define PI_SOFTRESET 0x000080 /* Softreset (to both CPUs) */ +#define PI_SOFTRESET 0x000080 /* Softreset (to both CPUs) */ -/* Regular Interrupt register checking. */ +/* Regular Interrupt register checking. */ #define PI_INT_PEND_MOD 0x000090 /* Write to set pending ints */ -#define PI_INT_PEND0 0x000098 /* Read to get pending ints */ -#define PI_INT_PEND1 0x0000a0 /* Read to get pending ints */ -#define PI_INT_MASK0_A 0x0000a8 /* Interrupt Mask 0 for CPU A */ -#define PI_INT_MASK1_A 0x0000b0 /* Interrupt Mask 1 for CPU A */ -#define PI_INT_MASK0_B 0x0000b8 /* Interrupt Mask 0 for CPU B */ -#define PI_INT_MASK1_B 0x0000c0 /* Interrupt Mask 1 for CPU B */ +#define PI_INT_PEND0 0x000098 /* Read to get pending ints */ +#define PI_INT_PEND1 0x0000a0 /* Read to get pending ints */ +#define PI_INT_MASK0_A 0x0000a8 /* Interrupt Mask 0 for CPU A */ +#define PI_INT_MASK1_A 0x0000b0 /* Interrupt Mask 1 for CPU A */ +#define PI_INT_MASK0_B 0x0000b8 /* Interrupt Mask 0 for CPU B */ +#define PI_INT_MASK1_B 0x0000c0 /* Interrupt Mask 1 for CPU B */ -#define PI_INT_MASK_OFFSET 0x10 /* Offset from A to B */ +#define PI_INT_MASK_OFFSET 0x10 /* Offset from A to B */ /* Crosscall interrupts */ @@ -83,49 +83,49 @@ #define PI_CC_PEND_SET_B 0x0000d0 /* CC Interrupt Pending Set, CPU B */ #define PI_CC_PEND_CLR_A 0x0000d8 /* CC Interrupt Pending Clr, CPU A */ #define PI_CC_PEND_CLR_B 0x0000e0 /* CC Interrupt Pending Clr, CPU B */ -#define PI_CC_MASK 0x0000e8 /* CC Interrupt mask */ +#define PI_CC_MASK 0x0000e8 /* CC Interrupt mask */ -#define PI_INT_SET_OFFSET 0x08 /* Offset from A to B */ +#define PI_INT_SET_OFFSET 0x08 /* Offset from A to B */ /* Realtime Counter and Profiler control registers */ -#define PI_RT_COUNT 0x030100 /* Real Time Counter */ -#define PI_RT_COMPARE_A 0x000108 /* Real Time Compare A */ -#define PI_RT_COMPARE_B 0x000110 /* Real Time Compare B */ +#define PI_RT_COUNT 0x030100 /* Real Time Counter */ +#define PI_RT_COMPARE_A 0x000108 /* Real Time Compare A */ +#define PI_RT_COMPARE_B 0x000110 /* Real Time Compare B */ #define PI_PROFILE_COMPARE 0x000118 /* L5 int to both cpus when == RTC */ -#define PI_RT_PEND_A 0x000120 /* Set if RT int for A pending */ -#define PI_RT_PEND_B 0x000128 /* Set if RT int for B pending */ +#define PI_RT_PEND_A 0x000120 /* Set if RT int for A pending */ +#define PI_RT_PEND_B 0x000128 /* Set if RT int for B pending */ #define PI_PROF_PEND_A 0x000130 /* Set if Prof int for A pending */ #define PI_PROF_PEND_B 0x000138 /* Set if Prof int for B pending */ -#define PI_RT_EN_A 0x000140 /* RT int for CPU A enable */ -#define PI_RT_EN_B 0x000148 /* RT int for CPU B enable */ -#define PI_PROF_EN_A 0x000150 /* PROF int for CPU A enable */ -#define PI_PROF_EN_B 0x000158 /* PROF int for CPU B enable */ -#define PI_RT_LOCAL_CTRL 0x000160 /* RT control register */ +#define PI_RT_EN_A 0x000140 /* RT int for CPU A enable */ +#define PI_RT_EN_B 0x000148 /* RT int for CPU B enable */ +#define PI_PROF_EN_A 0x000150 /* PROF int for CPU A enable */ +#define PI_PROF_EN_B 0x000158 /* PROF int for CPU B enable */ +#define PI_RT_LOCAL_CTRL 0x000160 /* RT control register */ #define PI_RT_FILTER_CTRL 0x000168 /* GCLK Filter control register */ #define PI_COUNT_OFFSET 0x08 /* A to B offset for all counts */ /* Built-In Self Test support */ -#define PI_BIST_WRITE_DATA 0x000200 /* BIST write data */ -#define PI_BIST_READ_DATA 0x000208 /* BIST read data */ -#define PI_BIST_COUNT_TARG 0x000210 /* BIST Count and Target */ -#define PI_BIST_READY 0x000218 /* BIST Ready indicator */ -#define PI_BIST_SHIFT_LOAD 0x000220 /* BIST control */ -#define PI_BIST_SHIFT_UNLOAD 0x000228 /* BIST control */ -#define PI_BIST_ENTER_RUN 0x000230 /* BIST control */ +#define PI_BIST_WRITE_DATA 0x000200 /* BIST write data */ +#define PI_BIST_READ_DATA 0x000208 /* BIST read data */ +#define PI_BIST_COUNT_TARG 0x000210 /* BIST Count and Target */ +#define PI_BIST_READY 0x000218 /* BIST Ready indicator */ +#define PI_BIST_SHIFT_LOAD 0x000220 /* BIST control */ +#define PI_BIST_SHIFT_UNLOAD 0x000228 /* BIST control */ +#define PI_BIST_ENTER_RUN 0x000230 /* BIST control */ /* Graphics control registers */ -#define PI_GFX_PAGE_A 0x000300 /* Graphics page A */ -#define PI_GFX_CREDIT_CNTR_A 0x000308 /* Graphics credit counter A */ -#define PI_GFX_BIAS_A 0x000310 /* Graphics bias A */ +#define PI_GFX_PAGE_A 0x000300 /* Graphics page A */ +#define PI_GFX_CREDIT_CNTR_A 0x000308 /* Graphics credit counter A */ +#define PI_GFX_BIAS_A 0x000310 /* Graphics bias A */ #define PI_GFX_INT_CNTR_A 0x000318 /* Graphics interrupt counter A */ #define PI_GFX_INT_CMP_A 0x000320 /* Graphics interrupt comparator A */ -#define PI_GFX_PAGE_B 0x000328 /* Graphics page B */ -#define PI_GFX_CREDIT_CNTR_B 0x000330 /* Graphics credit counter B */ -#define PI_GFX_BIAS_B 0x000338 /* Graphics bias B */ +#define PI_GFX_PAGE_B 0x000328 /* Graphics page B */ +#define PI_GFX_CREDIT_CNTR_B 0x000330 /* Graphics credit counter B */ +#define PI_GFX_BIAS_B 0x000338 /* Graphics bias B */ #define PI_GFX_INT_CNTR_B 0x000340 /* Graphics interrupt counter B */ #define PI_GFX_INT_CMP_B 0x000348 /* Graphics interrupt comparator B */ @@ -138,24 +138,24 @@ #define PI_ERR_INT_MASK_B 0x000410 /* Error Interrupt mask for CPU B */ #define PI_ERR_STACK_ADDR_A 0x000418 /* Error stack address for CPU A */ #define PI_ERR_STACK_ADDR_B 0x000420 /* Error stack address for CPU B */ -#define PI_ERR_STACK_SIZE 0x000428 /* Error Stack Size */ -#define PI_ERR_STATUS0_A 0x000430 /* Error Status 0A */ +#define PI_ERR_STACK_SIZE 0x000428 /* Error Stack Size */ +#define PI_ERR_STATUS0_A 0x000430 /* Error Status 0A */ #define PI_ERR_STATUS0_A_RCLR 0x000438 /* Error Status 0A clear on read */ -#define PI_ERR_STATUS1_A 0x000440 /* Error Status 1A */ +#define PI_ERR_STATUS1_A 0x000440 /* Error Status 1A */ #define PI_ERR_STATUS1_A_RCLR 0x000448 /* Error Status 1A clear on read */ -#define PI_ERR_STATUS0_B 0x000450 /* Error Status 0B */ +#define PI_ERR_STATUS0_B 0x000450 /* Error Status 0B */ #define PI_ERR_STATUS0_B_RCLR 0x000458 /* Error Status 0B clear on read */ -#define PI_ERR_STATUS1_B 0x000460 /* Error Status 1B */ +#define PI_ERR_STATUS1_B 0x000460 /* Error Status 1B */ #define PI_ERR_STATUS1_B_RCLR 0x000468 /* Error Status 1B clear on read */ -#define PI_SPOOL_CMP_A 0x000470 /* Spool compare for CPU A */ -#define PI_SPOOL_CMP_B 0x000478 /* Spool compare for CPU B */ -#define PI_CRB_TIMEOUT_A 0x000480 /* Timed out CRB entries for A */ -#define PI_CRB_TIMEOUT_B 0x000488 /* Timed out CRB entries for B */ +#define PI_SPOOL_CMP_A 0x000470 /* Spool compare for CPU A */ +#define PI_SPOOL_CMP_B 0x000478 /* Spool compare for CPU B */ +#define PI_CRB_TIMEOUT_A 0x000480 /* Timed out CRB entries for A */ +#define PI_CRB_TIMEOUT_B 0x000488 /* Timed out CRB entries for B */ #define PI_SYSAD_ERRCHK_EN 0x000490 /* Enables SYSAD error checking */ -#define PI_BAD_CHECK_BIT_A 0x000498 /* Force SYSAD check bit error */ -#define PI_BAD_CHECK_BIT_B 0x0004a0 /* Force SYSAD check bit error */ -#define PI_NACK_CNT_A 0x0004a8 /* Consecutive NACK counter */ -#define PI_NACK_CNT_B 0x0004b0 /* " " for CPU B */ +#define PI_BAD_CHECK_BIT_A 0x000498 /* Force SYSAD check bit error */ +#define PI_BAD_CHECK_BIT_B 0x0004a0 /* Force SYSAD check bit error */ +#define PI_NACK_CNT_A 0x0004a8 /* Consecutive NACK counter */ +#define PI_NACK_CNT_B 0x0004b0 /* " " for CPU B */ #define PI_NACK_CMP 0x0004b8 /* NACK count compare */ #define PI_STACKADDR_OFFSET (PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A) #define PI_ERRSTAT_OFFSET (PI_ERR_STATUS0_B - PI_ERR_STATUS0_A) @@ -168,7 +168,7 @@ #define PI_ERR_SPUR_MSG_A 0x00000008 #define PI_ERR_WRB_TERR_B 0x00000010 /* WRB TERR */ #define PI_ERR_WRB_TERR_A 0x00000020 -#define PI_ERR_WRB_WERR_B 0x00000040 /* WRB WERR */ +#define PI_ERR_WRB_WERR_B 0x00000040 /* WRB WERR */ #define PI_ERR_WRB_WERR_A 0x00000080 #define PI_ERR_SYSSTATE_B 0x00000100 /* SysState parity error */ #define PI_ERR_SYSSTATE_A 0x00000200 @@ -196,32 +196,32 @@ * The following three macros define all possible error int pends. */ -#define PI_FATAL_ERR_CPU_A (PI_ERR_SYSSTATE_TAG_A | \ - PI_ERR_BAD_SPOOL_A | \ - PI_ERR_SYSCMD_ADDR_A | \ - PI_ERR_SYSCMD_DATA_A | \ - PI_ERR_SYSAD_ADDR_A | \ +#define PI_FATAL_ERR_CPU_A (PI_ERR_SYSSTATE_TAG_A | \ + PI_ERR_BAD_SPOOL_A | \ + PI_ERR_SYSCMD_ADDR_A | \ + PI_ERR_SYSCMD_DATA_A | \ + PI_ERR_SYSAD_ADDR_A | \ PI_ERR_SYSAD_DATA_A | \ PI_ERR_SYSSTATE_A) -#define PI_MISC_ERR_CPU_A (PI_ERR_UNCAC_UNCORR_A | \ - PI_ERR_WRB_WERR_A | \ - PI_ERR_WRB_TERR_A | \ - PI_ERR_SPUR_MSG_A | \ +#define PI_MISC_ERR_CPU_A (PI_ERR_UNCAC_UNCORR_A | \ + PI_ERR_WRB_WERR_A | \ + PI_ERR_WRB_TERR_A | \ + PI_ERR_SPUR_MSG_A | \ PI_ERR_SPOOL_CMP_A) -#define PI_FATAL_ERR_CPU_B (PI_ERR_SYSSTATE_TAG_B | \ - PI_ERR_BAD_SPOOL_B | \ - PI_ERR_SYSCMD_ADDR_B | \ - PI_ERR_SYSCMD_DATA_B | \ - PI_ERR_SYSAD_ADDR_B | \ +#define PI_FATAL_ERR_CPU_B (PI_ERR_SYSSTATE_TAG_B | \ + PI_ERR_BAD_SPOOL_B | \ + PI_ERR_SYSCMD_ADDR_B | \ + PI_ERR_SYSCMD_DATA_B | \ + PI_ERR_SYSAD_ADDR_B | \ PI_ERR_SYSAD_DATA_B | \ PI_ERR_SYSSTATE_B) -#define PI_MISC_ERR_CPU_B (PI_ERR_UNCAC_UNCORR_B | \ - PI_ERR_WRB_WERR_B | \ - PI_ERR_WRB_TERR_B | \ - PI_ERR_SPUR_MSG_B | \ +#define PI_MISC_ERR_CPU_B (PI_ERR_UNCAC_UNCORR_B | \ + PI_ERR_WRB_WERR_B | \ + PI_ERR_WRB_TERR_B | \ + PI_ERR_SPUR_MSG_B | \ PI_ERR_SPOOL_CMP_B) #define PI_ERR_GENERIC (PI_ERR_MD_UNCORR) @@ -242,24 +242,24 @@ #define PI_ERR_ST0_CMD_SHFT 17 #define PI_ERR_ST0_ADDR_MASK 0x3ffffffffe000000 #define PI_ERR_ST0_ADDR_SHFT 25 -#define PI_ERR_ST0_OVERRUN_MASK 0x4000000000000000 -#define PI_ERR_ST0_OVERRUN_SHFT 62 +#define PI_ERR_ST0_OVERRUN_MASK 0x4000000000000000 +#define PI_ERR_ST0_OVERRUN_SHFT 62 #define PI_ERR_ST0_VALID_MASK 0x8000000000000000 #define PI_ERR_ST0_VALID_SHFT 63 /* Fields in PI_ERR_STATUS1_[AB] */ #define PI_ERR_ST1_SPOOL_MASK 0x00000000001fffff #define PI_ERR_ST1_SPOOL_SHFT 0 -#define PI_ERR_ST1_TOUTCNT_MASK 0x000000001fe00000 -#define PI_ERR_ST1_TOUTCNT_SHFT 21 +#define PI_ERR_ST1_TOUTCNT_MASK 0x000000001fe00000 +#define PI_ERR_ST1_TOUTCNT_SHFT 21 #define PI_ERR_ST1_INVCNT_MASK 0x0000007fe0000000 #define PI_ERR_ST1_INVCNT_SHFT 29 #define PI_ERR_ST1_CRBNUM_MASK 0x0000038000000000 #define PI_ERR_ST1_CRBNUM_SHFT 39 #define PI_ERR_ST1_WRBRRB_MASK 0x0000040000000000 #define PI_ERR_ST1_WRBRRB_SHFT 42 -#define PI_ERR_ST1_CRBSTAT_MASK 0x001ff80000000000 -#define PI_ERR_ST1_CRBSTAT_SHFT 43 +#define PI_ERR_ST1_CRBSTAT_MASK 0x001ff80000000000 +#define PI_ERR_ST1_CRBSTAT_SHFT 43 #define PI_ERR_ST1_MSGSRC_MASK 0xffe0000000000000 #define PI_ERR_ST1_MSGSRC_SHFT 53 @@ -274,8 +274,8 @@ #define PI_ERR_STK_CRBNUM_SHFT 9 #define PI_ERR_STK_WRBRRB_MASK 0x0000000000001000 #define PI_ERR_STK_WRBRRB_SHFT 12 -#define PI_ERR_STK_CRBSTAT_MASK 0x00000000007fe000 -#define PI_ERR_STK_CRBSTAT_SHFT 13 +#define PI_ERR_STK_CRBSTAT_MASK 0x00000000007fe000 +#define PI_ERR_STK_CRBSTAT_SHFT 13 #define PI_ERR_STK_CMD_MASK 0x000000007f800000 #define PI_ERR_STK_CMD_SHFT 23 #define PI_ERR_STK_ADDR_MASK 0xffffffff80000000 @@ -364,11 +364,11 @@ typedef u64 rtc_time_t; /* Bits in PI_SYSAD_ERRCHK_EN */ #define PI_SYSAD_ERRCHK_ECCGEN 0x01 /* Enable ECC generation */ -#define PI_SYSAD_ERRCHK_QUALGEN 0x02 /* Enable data quality signal gen. */ -#define PI_SYSAD_ERRCHK_SADP 0x04 /* Enable SysAD parity checking */ +#define PI_SYSAD_ERRCHK_QUALGEN 0x02 /* Enable data quality signal gen. */ +#define PI_SYSAD_ERRCHK_SADP 0x04 /* Enable SysAD parity checking */ #define PI_SYSAD_ERRCHK_CMDP 0x08 /* Enable SysCmd parity checking */ #define PI_SYSAD_ERRCHK_STATE 0x10 /* Enable SysState parity checking */ -#define PI_SYSAD_ERRCHK_QUAL 0x20 /* Enable data quality checking */ +#define PI_SYSAD_ERRCHK_QUAL 0x20 /* Enable data quality checking */ #define PI_SYSAD_CHECK_ALL 0x3f /* Generate and check all signals. */ /* Interrupt pending bits on R10000 */ diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h index 3c97e08..3b5efee 100644 --- a/arch/mips/include/asm/sn/sn0/ip27.h +++ b/arch/mips/include/asm/sn/sn0/ip27.h @@ -21,14 +21,14 @@ #ifndef __ASSEMBLY__ -#define CAUSE_BERRINTR IE_IRQ5 +#define CAUSE_BERRINTR IE_IRQ5 -#define ECCF_CACHE_ERR 0 -#define ECCF_TAGLO 1 -#define ECCF_ECC 2 -#define ECCF_ERROREPC 3 -#define ECCF_PADDR 4 -#define ECCF_SIZE (5 * sizeof(long)) +#define ECCF_CACHE_ERR 0 +#define ECCF_TAGLO 1 +#define ECCF_ECC 2 +#define ECCF_ERROREPC 3 +#define ECCF_PADDR 4 +#define ECCF_SIZE (5 * sizeof(long)) #endif /* !__ASSEMBLY__ */ @@ -39,8 +39,8 @@ * the processor number of the calling processor. The proc parameters * must be a register. */ -#define KL_GET_CPUNUM(proc) \ - dli proc, LOCAL_HUB(0); \ +#define KL_GET_CPUNUM(proc) \ + dli proc, LOCAL_HUB(0); \ ld proc, PI_CPU_NUM(proc) #endif /* __ASSEMBLY__ */ @@ -71,15 +71,15 @@ #define NUM_CAUSE_INTRS 8 -#define SCACHE_LINESIZE 128 -#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1) +#define SCACHE_LINESIZE 128 +#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1) #include <asm/sn/addrs.h> -#define LED_CYCLE_MASK 0x0f -#define LED_CYCLE_SHFT 4 +#define LED_CYCLE_MASK 0x0f +#define LED_CYCLE_SHFT 4 #define SEND_NMI(_nasid, _slice) \ - REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1) + REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1) #endif /* _ASM_SN_SN0_IP27_H */ diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h index 74d0bb2..c4813d6 100644 --- a/arch/mips/include/asm/sn/types.h +++ b/arch/mips/include/asm/sn/types.h @@ -11,7 +11,7 @@ #include <linux/types.h> -typedef unsigned long cpuid_t; +typedef unsigned long cpuid_t; typedef unsigned long cnodemask_t; typedef signed short nasid_t; /* node id in numa-as-id space */ typedef signed short cnodeid_t; /* node id in compact-id space */ @@ -19,7 +19,7 @@ typedef signed char partid_t; /* partition ID type */ typedef signed short moduleid_t; /* user-visible module number type */ typedef signed short cmoduleid_t; /* kernel compact module id type */ typedef unsigned char clusterid_t; /* Clusterid of the cell */ -typedef unsigned long pfn_t; +typedef unsigned long pfn_t; typedef dev_t vertex_hdl_t; /* hardware graph vertex handle */ diff --git a/arch/mips/include/asm/sni.h b/arch/mips/include/asm/sni.h index 8c1eb02..a107201 100644 --- a/arch/mips/include/asm/sni.h +++ b/arch/mips/include/asm/sni.h @@ -13,27 +13,27 @@ extern unsigned int sni_brd_type; -#define SNI_BRD_10 2 -#define SNI_BRD_10NEW 3 -#define SNI_BRD_TOWER_OASIC 4 -#define SNI_BRD_MINITOWER 5 -#define SNI_BRD_PCI_TOWER 6 -#define SNI_BRD_RM200 7 -#define SNI_BRD_PCI_MTOWER 8 -#define SNI_BRD_PCI_DESKTOP 9 -#define SNI_BRD_PCI_TOWER_CPLUS 10 +#define SNI_BRD_10 2 +#define SNI_BRD_10NEW 3 +#define SNI_BRD_TOWER_OASIC 4 +#define SNI_BRD_MINITOWER 5 +#define SNI_BRD_PCI_TOWER 6 +#define SNI_BRD_RM200 7 +#define SNI_BRD_PCI_MTOWER 8 +#define SNI_BRD_PCI_DESKTOP 9 +#define SNI_BRD_PCI_TOWER_CPLUS 10 #define SNI_BRD_PCI_MTOWER_CPLUS 11 /* RM400 cpu types */ -#define SNI_CPU_M8021 0x01 -#define SNI_CPU_M8030 0x04 -#define SNI_CPU_M8031 0x06 -#define SNI_CPU_M8034 0x0f -#define SNI_CPU_M8037 0x07 -#define SNI_CPU_M8040 0x05 -#define SNI_CPU_M8043 0x09 -#define SNI_CPU_M8050 0x0b -#define SNI_CPU_M8053 0x0d +#define SNI_CPU_M8021 0x01 +#define SNI_CPU_M8030 0x04 +#define SNI_CPU_M8031 0x06 +#define SNI_CPU_M8034 0x0f +#define SNI_CPU_M8037 0x07 +#define SNI_CPU_M8040 0x05 +#define SNI_CPU_M8043 0x09 +#define SNI_CPU_M8050 0x0b +#define SNI_CPU_M8053 0x0d #define SNI_PORT_BASE CKSEG1ADDR(0xb4000000) @@ -52,14 +52,14 @@ extern unsigned int sni_brd_type; #define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0044) #define PCIMT_SYNDROME CKSEG1ADDR(0xbfff004c) #define PCIMT_ITPEND CKSEG1ADDR(0xbfff0054) -#define IT_INT2 0x01 -#define IT_INTD 0x02 -#define IT_INTC 0x04 -#define IT_INTB 0x08 -#define IT_INTA 0x10 -#define IT_EISA 0x20 -#define IT_SCSI 0x40 -#define IT_ETH 0x80 +#define IT_INT2 0x01 +#define IT_INTD 0x02 +#define IT_INTC 0x04 +#define IT_INTB 0x08 +#define IT_INTA 0x10 +#define IT_EISA 0x20 +#define IT_SCSI 0x40 +#define IT_ETH 0x80 #define PCIMT_IRQSEL CKSEG1ADDR(0xbfff005c) #define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0064) #define PCIMT_ECCREG CKSEG1ADDR(0xbfff006c) @@ -86,14 +86,14 @@ extern unsigned int sni_brd_type; #define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0040) #define PCIMT_SYNDROME CKSEG1ADDR(0xbfff0048) #define PCIMT_ITPEND CKSEG1ADDR(0xbfff0050) -#define IT_INT2 0x01 -#define IT_INTD 0x02 -#define IT_INTC 0x04 -#define IT_INTB 0x08 -#define IT_INTA 0x10 -#define IT_EISA 0x20 -#define IT_SCSI 0x40 -#define IT_ETH 0x80 +#define IT_INT2 0x01 +#define IT_INTD 0x02 +#define IT_INTC 0x04 +#define IT_INTB 0x08 +#define IT_INTA 0x10 +#define IT_EISA 0x20 +#define IT_SCSI 0x40 +#define IT_ETH 0x80 #define PCIMT_IRQSEL CKSEG1ADDR(0xbfff0058) #define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0060) #define PCIMT_ECCREG CKSEG1ADDR(0xbfff0068) @@ -137,29 +137,29 @@ extern unsigned int sni_brd_type; /* * A20R based boards */ -#define A20R_PT_CLOCK_BASE CKSEG1ADDR(0xbc040000) -#define A20R_PT_TIM0_ACK CKSEG1ADDR(0xbc050000) -#define A20R_PT_TIM1_ACK CKSEG1ADDR(0xbc060000) +#define A20R_PT_CLOCK_BASE CKSEG1ADDR(0xbc040000) +#define A20R_PT_TIM0_ACK CKSEG1ADDR(0xbc050000) +#define A20R_PT_TIM1_ACK CKSEG1ADDR(0xbc060000) -#define SNI_A20R_IRQ_BASE MIPS_CPU_IRQ_BASE -#define SNI_A20R_IRQ_TIMER (SNI_A20R_IRQ_BASE+5) +#define SNI_A20R_IRQ_BASE MIPS_CPU_IRQ_BASE +#define SNI_A20R_IRQ_TIMER (SNI_A20R_IRQ_BASE+5) -#define SNI_PCIT_INT_REG CKSEG1ADDR(0xbfff000c) +#define SNI_PCIT_INT_REG CKSEG1ADDR(0xbfff000c) -#define SNI_PCIT_INT_START 24 -#define SNI_PCIT_INT_END 30 +#define SNI_PCIT_INT_START 24 +#define SNI_PCIT_INT_END 30 -#define PCIT_IRQ_ETHERNET (MIPS_CPU_IRQ_BASE + 5) -#define PCIT_IRQ_INTA (SNI_PCIT_INT_START + 0) -#define PCIT_IRQ_INTB (SNI_PCIT_INT_START + 1) -#define PCIT_IRQ_INTC (SNI_PCIT_INT_START + 2) -#define PCIT_IRQ_INTD (SNI_PCIT_INT_START + 3) -#define PCIT_IRQ_SCSI0 (SNI_PCIT_INT_START + 4) -#define PCIT_IRQ_SCSI1 (SNI_PCIT_INT_START + 5) +#define PCIT_IRQ_ETHERNET (MIPS_CPU_IRQ_BASE + 5) +#define PCIT_IRQ_INTA (SNI_PCIT_INT_START + 0) +#define PCIT_IRQ_INTB (SNI_PCIT_INT_START + 1) +#define PCIT_IRQ_INTC (SNI_PCIT_INT_START + 2) +#define PCIT_IRQ_INTD (SNI_PCIT_INT_START + 3) +#define PCIT_IRQ_SCSI0 (SNI_PCIT_INT_START + 4) +#define PCIT_IRQ_SCSI1 (SNI_PCIT_INT_START + 5) /* - * Interrupt 0-16 are EISA interrupts. Interrupts from 16 on are assigned + * Interrupt 0-16 are EISA interrupts. Interrupts from 16 on are assigned * to the other interrupts generated by ASIC PCI. * * INT2 is a wired-or of the push button interrupt, high temperature interrupt @@ -204,12 +204,12 @@ extern unsigned int sni_brd_type; #ifdef CONFIG_CPU_LITTLE_ENDIAN #define __SNI_END 3 #endif -#define SNI_IDPROM_BASE CKSEG1ADDR(0x1ff00000) +#define SNI_IDPROM_BASE CKSEG1ADDR(0x1ff00000) #define SNI_IDPROM_MEMSIZE (SNI_IDPROM_BASE + (0x28 ^ __SNI_END)) #define SNI_IDPROM_BRDTYPE (SNI_IDPROM_BASE + (0x29 ^ __SNI_END)) #define SNI_IDPROM_CPUTYPE (SNI_IDPROM_BASE + (0x30 ^ __SNI_END)) -#define SNI_IDPROM_SIZE 0x1000 +#define SNI_IDPROM_SIZE 0x1000 /* board specific init functions */ extern void sni_a20r_init(void); diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h index 65900da..d2da53c 100644 --- a/arch/mips/include/asm/sparsemem.h +++ b/arch/mips/include/asm/sparsemem.h @@ -11,7 +11,7 @@ #else # define SECTION_SIZE_BITS 28 #endif -#define MAX_PHYSMEM_BITS 35 +#define MAX_PHYSMEM_BITS 35 #endif /* CONFIG_SPARSEMEM */ #endif /* _MIPS_SPARSEMEM_H */ diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h index ca61e84..5130c88 100644 --- a/arch/mips/include/asm/spinlock.h +++ b/arch/mips/include/asm/spinlock.h @@ -17,7 +17,7 @@ /* * Your basic SMP spinlocks, allowing only a single CPU anywhere * - * Simple spin lock operations. There are two variants, one clears IRQ's + * Simple spin lock operations. There are two variants, one clears IRQ's * on the local processor, one does not. * * These are fair FIFO ticket locks @@ -222,7 +222,7 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock) * write_can_lock - would write_trylock() succeed? * @lock: the rwlock in question. */ -#define arch_write_can_lock(rw) (!(rw)->lock) +#define arch_write_can_lock(rw) (!(rw)->lock) static inline void arch_read_lock(arch_rwlock_t *rw) { diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h index c52f360..9b2528e 100644 --- a/arch/mips/include/asm/spinlock_types.h +++ b/arch/mips/include/asm/spinlock_types.h @@ -11,7 +11,7 @@ typedef union { /* - * bits 0..15 : serving_now + * bits 0..15 : serving_now * bits 16..31 : ticket */ u32 lock; diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index cb41af5..c993840 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -218,17 +218,17 @@ ori $28, sp, _THREAD_MASK xori $28, _THREAD_MASK #ifdef CONFIG_CPU_CAVIUM_OCTEON - .set mips64 - pref 0, 0($28) /* Prefetch the current pointer */ - pref 0, PT_R31(sp) /* Prefetch the $31(ra) */ + .set mips64 + pref 0, 0($28) /* Prefetch the current pointer */ + pref 0, PT_R31(sp) /* Prefetch the $31(ra) */ /* The Octeon multiplier state is affected by general multiply instructions. It must be saved before and kernel code might corrupt it */ - jal octeon_mult_save - LONG_L v1, 0($28) /* Load the current pointer */ + jal octeon_mult_save + LONG_L v1, 0($28) /* Load the current pointer */ /* Restore $31(ra) that was changed by the jal */ - LONG_L ra, PT_R31(sp) - pref 0, 0(v1) /* Prefetch the current thread */ + LONG_L ra, PT_R31(sp) + pref 0, 0(v1) /* Prefetch the current thread */ #endif .set pop .endm diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h index 436e3ad..29030cb 100644 --- a/arch/mips/include/asm/string.h +++ b/arch/mips/include/asm/string.h @@ -35,7 +35,7 @@ static __inline__ char *strcpy(char *__dest, __const__ char *__src) ".set\tat\n\t" ".set\treorder" : "=r" (__dest), "=r" (__src) - : "0" (__dest), "1" (__src) + : "0" (__dest), "1" (__src) : "memory"); return __xdest; @@ -62,9 +62,9 @@ static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n) "2:\n\t" ".set\tat\n\t" ".set\treorder" - : "=r" (__dest), "=r" (__src), "=r" (__n) - : "0" (__dest), "1" (__src), "2" (__n) - : "memory"); + : "=r" (__dest), "=r" (__src), "=r" (__n) + : "0" (__dest), "1" (__src), "2" (__n) + : "memory"); return __xdest; } diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h index 4f8ddba8..fd16bcb 100644 --- a/arch/mips/include/asm/switch_to.h +++ b/arch/mips/include/asm/switch_to.h @@ -30,7 +30,7 @@ extern struct task_struct *ll_task; #ifdef CONFIG_MIPS_MT_FPAFF /* - * Handle the scheduler resume end of FPU affinity management. We do this + * Handle the scheduler resume end of FPU affinity management. We do this * inline to try to keep the overhead down. If we have been forced to run on * a "CPU" with an FPU because of a previous high level of FP computation, * but did not actually use the FPU during the most recent time-slice (CU1 @@ -72,7 +72,7 @@ do { \ __save_dsp(prev); \ __clear_software_ll_bit(); \ __usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU); \ - (last) = resume(prev, next, task_thread_info(next), __usedfpu); \ + (last) = resume(prev, next, task_thread_info(next), __usedfpu); \ } while (0) #define finish_arch_switch(prev) \ diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index b2050b9..178f792 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -44,7 +44,7 @@ struct thread_info { #define INIT_THREAD_INFO(tsk) \ { \ .task = &tsk, \ - .exec_domain = &default_exec_domain, \ + .exec_domain = &default_exec_domain, \ .flags = _TIF_FIXADE, \ .cpu = 0, \ .preempt_count = INIT_PREEMPT_COUNT, \ diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h index 761f2e9..debc800 100644 --- a/arch/mips/include/asm/time.h +++ b/arch/mips/include/asm/time.h @@ -6,8 +6,8 @@ * include/asm-mips/time.h * header file for the new style time.c file and time services. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -75,7 +75,7 @@ extern int init_r4k_clocksource(void); static inline int init_mips_clocksource(void) { -#ifdef CONFIG_CSRC_R4K +#if defined(CONFIG_CSRC_R4K) && !defined(CONFIG_CSRC_GIC) return init_r4k_clocksource(); #else return 0; diff --git a/arch/mips/include/asm/tlb.h b/arch/mips/include/asm/tlb.h index 80d9dfc..c67842b 100644 --- a/arch/mips/include/asm/tlb.h +++ b/arch/mips/include/asm/tlb.h @@ -5,7 +5,7 @@ * MIPS doesn't need any special per-pte or per-vma handling, except * we need to flush cache for area to be unmapped. */ -#define tlb_start_vma(tlb, vma) \ +#define tlb_start_vma(tlb, vma) \ do { \ if (!tlb->fullmm) \ flush_cache_range(vma, vma->vm_start, vma->vm_end); \ diff --git a/arch/mips/include/asm/topology.h b/arch/mips/include/asm/topology.h index 259145e..12609a1 100644 --- a/arch/mips/include/asm/topology.h +++ b/arch/mips/include/asm/topology.h @@ -11,7 +11,7 @@ #include <topology.h> #ifdef CONFIG_SMP -#define smt_capable() (smp_num_siblings > 1) +#define smt_capable() (smp_num_siblings > 1) #endif #endif /* __ASM_TOPOLOGY_H */ diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h index 420ca06..f41cf3e 100644 --- a/arch/mips/include/asm/traps.h +++ b/arch/mips/include/asm/traps.h @@ -14,7 +14,7 @@ /* * Possible status responses for a board_be_handler backend. */ -#define MIPS_BE_DISCARD 0 /* return with no action */ +#define MIPS_BE_DISCARD 0 /* return with no action */ #define MIPS_BE_FIXUP 1 /* return to the fixup code */ #define MIPS_BE_FATAL 2 /* treat as an unrecoverable error */ diff --git a/arch/mips/include/asm/txx9/jmr3927.h b/arch/mips/include/asm/txx9/jmr3927.h index 8808d7f..aab959d 100644 --- a/arch/mips/include/asm/txx9/jmr3927.h +++ b/arch/mips/include/asm/txx9/jmr3927.h @@ -40,7 +40,7 @@ #define JMR3927_PCIIO_BASE (KSEG1 + JMR3927_PCIIO) #define JMR3927_IOC_REV_ADDR (JMR3927_IOC_BASE + 0x00000000) -#define JMR3927_IOC_NVRAMB_ADDR (JMR3927_IOC_BASE + 0x00010000) +#define JMR3927_IOC_NVRAMB_ADDR (JMR3927_IOC_BASE + 0x00010000) #define JMR3927_IOC_LED_ADDR (JMR3927_IOC_BASE + 0x00020000) #define JMR3927_IOC_DIPSW_ADDR (JMR3927_IOC_BASE + 0x00030000) #define JMR3927_IOC_BREV_ADDR (JMR3927_IOC_BASE + 0x00040000) @@ -115,9 +115,9 @@ #define JMR3927_NR_IRQ_IRC 16 /* On-Chip IRC */ #define JMR3927_NR_IRQ_IOC 8 /* PCI/MODEM/INT[6:7] */ -#define JMR3927_IRQ_IRC TXX9_IRQ_BASE -#define JMR3927_IRQ_IOC (JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC) -#define JMR3927_IRQ_END (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC) +#define JMR3927_IRQ_IRC TXX9_IRQ_BASE +#define JMR3927_IRQ_IOC (JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC) +#define JMR3927_IRQ_END (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC) #define JMR3927_IRQ_IRC_INT0 (JMR3927_IRQ_IRC + TX3927_IR_INT0) #define JMR3927_IRQ_IRC_INT1 (JMR3927_IRQ_IRC + TX3927_IR_INT1) @@ -127,11 +127,11 @@ #define JMR3927_IRQ_IRC_INT5 (JMR3927_IRQ_IRC + TX3927_IR_INT5) #define JMR3927_IRQ_IRC_SIO0 (JMR3927_IRQ_IRC + TX3927_IR_SIO0) #define JMR3927_IRQ_IRC_SIO1 (JMR3927_IRQ_IRC + TX3927_IR_SIO1) -#define JMR3927_IRQ_IRC_SIO(ch) (JMR3927_IRQ_IRC + TX3927_IR_SIO(ch)) +#define JMR3927_IRQ_IRC_SIO(ch) (JMR3927_IRQ_IRC + TX3927_IR_SIO(ch)) #define JMR3927_IRQ_IRC_DMA (JMR3927_IRQ_IRC + TX3927_IR_DMA) #define JMR3927_IRQ_IRC_PIO (JMR3927_IRQ_IRC + TX3927_IR_PIO) #define JMR3927_IRQ_IRC_PCI (JMR3927_IRQ_IRC + TX3927_IR_PCI) -#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch)) +#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch)) #define JMR3927_IRQ_IOC_PCIA (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA) #define JMR3927_IRQ_IOC_PCIB (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB) #define JMR3927_IRQ_IOC_PCIC (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC) @@ -147,7 +147,7 @@ #define JMR3927_IRQ_ETHER0 JMR3927_IRQ_IRC_INT3 /* Clocks */ -#define JMR3927_CORECLK 132710400 /* 132.7MHz */ +#define JMR3927_CORECLK 132710400 /* 132.7MHz */ /* * TX3927 Pin Configuration: diff --git a/arch/mips/include/asm/txx9/rbtx4927.h b/arch/mips/include/asm/txx9/rbtx4927.h index b2adab3..4060ad2 100644 --- a/arch/mips/include/asm/txx9/rbtx4927.h +++ b/arch/mips/include/asm/txx9/rbtx4927.h @@ -1,6 +1,6 @@ /* * Author: MontaVista Software, Inc. - * source@mvista.com + * source@mvista.com * * Copyright 2001-2002 MontaVista Software Inc. * @@ -38,7 +38,7 @@ #define RBTX4927_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000) #define RBTX4927_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006) #define RBTX4927_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000) -#define RBTX4927_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f000) +#define RBTX4927_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f000) #define RBTX4927_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f002) #define RBTX4927_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f006) #define RBTX4927_BRAMRTC_BASE (IO_BASE + TXX9_CE(2) + 0x00010000) @@ -50,7 +50,7 @@ #define rbtx4927_imask_addr ((__u8 __iomem *)RBTX4927_IMASK_ADDR) #define rbtx4927_imstat_addr ((__u8 __iomem *)RBTX4927_IMSTAT_ADDR) #define rbtx4927_softint_addr ((__u8 __iomem *)RBTX4927_SOFTINT_ADDR) -#define rbtx4927_softreset_addr ((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR) +#define rbtx4927_softreset_addr ((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR) #define rbtx4927_softresetlock_addr \ ((__u8 __iomem *)RBTX4927_SOFTRESETLOCK_ADDR) #define rbtx4927_pcireset_addr ((__u8 __iomem *)RBTX4927_PCIRESET_ADDR) diff --git a/arch/mips/include/asm/txx9/rbtx4938.h b/arch/mips/include/asm/txx9/rbtx4938.h index 9f0441a..9c969dd 100644 --- a/arch/mips/include/asm/txx9/rbtx4938.h +++ b/arch/mips/include/asm/txx9/rbtx4938.h @@ -36,7 +36,7 @@ #define RBTX4938_SPICS_ADDR (IO_BASE + TXX9_CE(2) + 0x00005002) #define RBTX4938_SFPWR_ADDR (IO_BASE + TXX9_CE(2) + 0x00005008) #define RBTX4938_SFVOL_ADDR (IO_BASE + TXX9_CE(2) + 0x0000500a) -#define RBTX4938_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007000) +#define RBTX4938_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007000) #define RBTX4938_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x00007002) #define RBTX4938_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007004) #define RBTX4938_ETHER_BASE (IO_BASE + TXX9_CE(2) + 0x00020000) @@ -78,7 +78,7 @@ #define rbtx4938_spics_addr ((__u8 __iomem *)RBTX4938_SPICS_ADDR) #define rbtx4938_sfpwr_addr ((__u8 __iomem *)RBTX4938_SFPWR_ADDR) #define rbtx4938_sfvol_addr ((__u8 __iomem *)RBTX4938_SFVOL_ADDR) -#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR) +#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR) #define rbtx4938_softresetlock_addr \ ((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR) #define rbtx4938_pcireset_addr ((__u8 __iomem *)RBTX4938_PCIRESET_ADDR) @@ -94,7 +94,7 @@ /* These are the virtual IRQ numbers, we divide all IRQ's into * 'spaces', the 'space' determines where and how to enable/disable - * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new + * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new * IRQ hardware is supported. */ #define RBTX4938_NR_IRQ_IOC 8 @@ -103,18 +103,18 @@ #define RBTX4938_IRQ_IOC (TXX9_IRQ_BASE + TX4938_NUM_IR) #define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC) -#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR) -#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR) -#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n)) -#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n)) +#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR) +#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR) +#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n)) +#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n)) #define RBTX4938_IRQ_IRC_DMA(ch, n) (RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n)) #define RBTX4938_IRQ_IRC_PIO (RBTX4938_IRQ_IRC + TX4938_IR_PIO) #define RBTX4938_IRQ_IRC_PDMAC (RBTX4938_IRQ_IRC + TX4938_IR_PDMAC) #define RBTX4938_IRQ_IRC_PCIC (RBTX4938_IRQ_IRC + TX4938_IR_PCIC) -#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n)) +#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n)) #define RBTX4938_IRQ_IRC_NDFMC (RBTX4938_IRQ_IRC + TX4938_IR_NDFMC) -#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR) -#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME) +#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR) +#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME) #define RBTX4938_IRQ_IRC_ACLC (RBTX4938_IRQ_IRC + TX4938_IR_ACLC) #define RBTX4938_IRQ_IRC_ACLCPME (RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME) #define RBTX4938_IRQ_IRC_PCIC1 (RBTX4938_IRQ_IRC + TX4938_IR_PCIC1) diff --git a/arch/mips/include/asm/txx9/rbtx4939.h b/arch/mips/include/asm/txx9/rbtx4939.h index e517899..6157bfd 100644 --- a/arch/mips/include/asm/txx9/rbtx4939.h +++ b/arch/mips/include/asm/txx9/rbtx4939.h @@ -17,7 +17,7 @@ /* Address map */ #define RBTX4939_IOC_REG_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) -#define RBTX4939_BOARD_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) +#define RBTX4939_BOARD_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000) #define RBTX4939_IOC_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000002) #define RBTX4939_CONFIG1_ADDR (IO_BASE + TXX9_CE(1) + 0x00000004) #define RBTX4939_CONFIG2_ADDR (IO_BASE + TXX9_CE(1) + 0x00000006) @@ -46,9 +46,9 @@ #define RBTX4939_VPSIN_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500c) #define RBTX4939_7SEG_ADDR(s, ch) \ (IO_BASE + TXX9_CE(1) + 0x00006000 + (s) * 16 + ((ch) & 3) * 2) -#define RBTX4939_SOFTRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00007000) +#define RBTX4939_SOFTRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00007000) #define RBTX4939_RESETEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00007002) -#define RBTX4939_RESETSTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00007004) +#define RBTX4939_RESETSTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00007004) #define RBTX4939_ETHER_BASE (IO_BASE + TXX9_CE(1) + 0x00020000) /* Ethernet port address */ @@ -77,11 +77,11 @@ #define RBTX4939_PE2_CIR 0x08 #define RBTX4939_PE2_SPI 0x10 #define RBTX4939_PE2_GPIO 0x20 -#define RBTX4939_PE3_VP 0x01 +#define RBTX4939_PE3_VP 0x01 #define RBTX4939_PE3_VP_P 0x02 #define RBTX4939_PE3_VP_S 0x04 -#define rbtx4939_board_rev_addr ((u8 __iomem *)RBTX4939_BOARD_REV_ADDR) +#define rbtx4939_board_rev_addr ((u8 __iomem *)RBTX4939_BOARD_REV_ADDR) #define rbtx4939_ioc_rev_addr ((u8 __iomem *)RBTX4939_IOC_REV_ADDR) #define rbtx4939_config1_addr ((u8 __iomem *)RBTX4939_CONFIG1_ADDR) #define rbtx4939_config2_addr ((u8 __iomem *)RBTX4939_CONFIG2_ADDR) @@ -110,9 +110,9 @@ #define rbtx4939_vpsin_addr ((u8 __iomem *)RBTX4939_VPSIN_ADDR) #define rbtx4939_7seg_addr(s, ch) \ ((u8 __iomem *)RBTX4939_7SEG_ADDR(s, ch)) -#define rbtx4939_softreset_addr ((u8 __iomem *)RBTX4939_SOFTRESET_ADDR) +#define rbtx4939_softreset_addr ((u8 __iomem *)RBTX4939_SOFTRESET_ADDR) #define rbtx4939_reseten_addr ((u8 __iomem *)RBTX4939_RESETEN_ADDR) -#define rbtx4939_resetstat_addr ((u8 __iomem *)RBTX4939_RESETSTAT_ADDR) +#define rbtx4939_resetstat_addr ((u8 __iomem *)RBTX4939_RESETSTAT_ADDR) /* * IRQ mappings diff --git a/arch/mips/include/asm/txx9/smsc_fdc37m81x.h b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h index d1d6332..926d08f 100644 --- a/arch/mips/include/asm/txx9/smsc_fdc37m81x.h +++ b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h @@ -18,43 +18,43 @@ /* Common Registers */ #define SMSC_FDC37M81X_CONFIG_INDEX 0x00 #define SMSC_FDC37M81X_CONFIG_DATA 0x01 -#define SMSC_FDC37M81X_CONF 0x02 -#define SMSC_FDC37M81X_INDEX 0x03 -#define SMSC_FDC37M81X_DNUM 0x07 -#define SMSC_FDC37M81X_DID 0x20 -#define SMSC_FDC37M81X_DREV 0x21 -#define SMSC_FDC37M81X_PCNT 0x22 -#define SMSC_FDC37M81X_PMGT 0x23 -#define SMSC_FDC37M81X_OSC 0x24 -#define SMSC_FDC37M81X_CONFPA0 0x26 -#define SMSC_FDC37M81X_CONFPA1 0x27 -#define SMSC_FDC37M81X_TEST4 0x2B -#define SMSC_FDC37M81X_TEST5 0x2C -#define SMSC_FDC37M81X_TEST1 0x2D -#define SMSC_FDC37M81X_TEST2 0x2E -#define SMSC_FDC37M81X_TEST3 0x2F +#define SMSC_FDC37M81X_CONF 0x02 +#define SMSC_FDC37M81X_INDEX 0x03 +#define SMSC_FDC37M81X_DNUM 0x07 +#define SMSC_FDC37M81X_DID 0x20 +#define SMSC_FDC37M81X_DREV 0x21 +#define SMSC_FDC37M81X_PCNT 0x22 +#define SMSC_FDC37M81X_PMGT 0x23 +#define SMSC_FDC37M81X_OSC 0x24 +#define SMSC_FDC37M81X_CONFPA0 0x26 +#define SMSC_FDC37M81X_CONFPA1 0x27 +#define SMSC_FDC37M81X_TEST4 0x2B +#define SMSC_FDC37M81X_TEST5 0x2C +#define SMSC_FDC37M81X_TEST1 0x2D +#define SMSC_FDC37M81X_TEST2 0x2E +#define SMSC_FDC37M81X_TEST3 0x2F /* Logical device numbers */ -#define SMSC_FDC37M81X_FDD 0x00 -#define SMSC_FDC37M81X_PARALLEL 0x03 -#define SMSC_FDC37M81X_SERIAL1 0x04 -#define SMSC_FDC37M81X_SERIAL2 0x05 -#define SMSC_FDC37M81X_KBD 0x07 -#define SMSC_FDC37M81X_AUXIO 0x08 -#define SMSC_FDC37M81X_NONE 0xff +#define SMSC_FDC37M81X_FDD 0x00 +#define SMSC_FDC37M81X_PARALLEL 0x03 +#define SMSC_FDC37M81X_SERIAL1 0x04 +#define SMSC_FDC37M81X_SERIAL2 0x05 +#define SMSC_FDC37M81X_KBD 0x07 +#define SMSC_FDC37M81X_AUXIO 0x08 +#define SMSC_FDC37M81X_NONE 0xff /* Logical device Config Registers */ -#define SMSC_FDC37M81X_ACTIVE 0x30 +#define SMSC_FDC37M81X_ACTIVE 0x30 #define SMSC_FDC37M81X_BASEADDR0 0x60 #define SMSC_FDC37M81X_BASEADDR1 0x61 -#define SMSC_FDC37M81X_INT 0x70 -#define SMSC_FDC37M81X_INT2 0x72 -#define SMSC_FDC37M81X_LDCR_F0 0xF0 +#define SMSC_FDC37M81X_INT 0x70 +#define SMSC_FDC37M81X_INT2 0x72 +#define SMSC_FDC37M81X_LDCR_F0 0xF0 /* Chip Config Values */ #define SMSC_FDC37M81X_CONFIG_ENTER 0x55 #define SMSC_FDC37M81X_CONFIG_EXIT 0xaa -#define SMSC_FDC37M81X_CHIP_ID 0x4d +#define SMSC_FDC37M81X_CHIP_ID 0x4d unsigned long smsc_fdc37m81x_init(unsigned long port); diff --git a/arch/mips/include/asm/txx9/tx3927.h b/arch/mips/include/asm/txx9/tx3927.h index dc30c8d..149fab4 100644 --- a/arch/mips/include/asm/txx9/tx3927.h +++ b/arch/mips/include/asm/txx9/tx3927.h @@ -8,8 +8,8 @@ #ifndef __ASM_TXX9_TX3927_H #define __ASM_TXX9_TX3927_H -#define TX3927_REG_BASE 0xfffe0000UL -#define TX3927_REG_SIZE 0x00010000 +#define TX3927_REG_BASE 0xfffe0000UL +#define TX3927_REG_SIZE 0x00010000 #define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000) #define TX3927_ROMC_REG (TX3927_REG_BASE + 0x9000) #define TX3927_DMA_REG (TX3927_REG_BASE + 0xb000) @@ -191,8 +191,8 @@ struct tx3927_ccfg_reg { #define TX3927_DMA_CCR_XFSZ_1W TX3927_DMA_CCR_XFSZ(2) #define TX3927_DMA_CCR_XFSZ_4W TX3927_DMA_CCR_XFSZ(4) #define TX3927_DMA_CCR_XFSZ_8W TX3927_DMA_CCR_XFSZ(5) -#define TX3927_DMA_CCR_XFSZ_16W TX3927_DMA_CCR_XFSZ(6) -#define TX3927_DMA_CCR_XFSZ_32W TX3927_DMA_CCR_XFSZ(7) +#define TX3927_DMA_CCR_XFSZ_16W TX3927_DMA_CCR_XFSZ(6) +#define TX3927_DMA_CCR_XFSZ_32W TX3927_DMA_CCR_XFSZ(7) #define TX3927_DMA_CCR_MEMIO 0x00000002 #define TX3927_DMA_CCR_ONEAD 0x00000001 @@ -250,7 +250,7 @@ struct tx3927_ccfg_reg { /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */ /* bits for PBAPMC */ -#define TX3927_PCIC_PBAPMC_RPBA 0x00000004 +#define TX3927_PCIC_PBAPMC_RPBA 0x00000004 #define TX3927_PCIC_PBAPMC_PBAEN 0x00000002 #define TX3927_PCIC_PBAPMC_BMCEN 0x00000001 @@ -282,7 +282,7 @@ struct tx3927_ccfg_reg { #define TX3927_CCFG_TLBOFF 0x00020000 #define TX3927_CCFG_BEOW 0x00010000 #define TX3927_CCFG_WR 0x00008000 -#define TX3927_CCFG_TOE 0x00004000 +#define TX3927_CCFG_TOE 0x00004000 #define TX3927_CCFG_PCIXARB 0x00002000 #define TX3927_CCFG_PCI3 0x00001000 #define TX3927_CCFG_PSNP 0x00000800 @@ -301,8 +301,8 @@ struct tx3927_ccfg_reg { #define TX3927_PCFG_SELALL 0x0003ffff #define TX3927_PCFG_SELCS 0x00020000 #define TX3927_PCFG_SELDSF 0x00010000 -#define TX3927_PCFG_SELSIOC_ALL 0x0000c000 -#define TX3927_PCFG_SELSIOC(ch) (0x00004000<<(ch)) +#define TX3927_PCFG_SELSIOC_ALL 0x0000c000 +#define TX3927_PCFG_SELSIOC(ch) (0x00004000<<(ch)) #define TX3927_PCFG_SELSIO_ALL 0x00003000 #define TX3927_PCFG_SELSIO(ch) (0x00001000<<(ch)) #define TX3927_PCFG_SELTMR_ALL 0x00000e00 diff --git a/arch/mips/include/asm/txx9/tx4927.h b/arch/mips/include/asm/txx9/tx4927.h index 18c98c5..284eea7 100644 --- a/arch/mips/include/asm/txx9/tx4927.h +++ b/arch/mips/include/asm/txx9/tx4927.h @@ -1,6 +1,6 @@ /* * Author: MontaVista Software, Inc. - * source@mvista.com + * source@mvista.com * * Copyright 2001-2006 MontaVista Software Inc. * @@ -33,11 +33,11 @@ #include <asm/txx9/tx4927pcic.h> #ifdef CONFIG_64BIT -#define TX4927_REG_BASE 0xffffffffff1f0000UL +#define TX4927_REG_BASE 0xffffffffff1f0000UL #else -#define TX4927_REG_BASE 0xff1f0000UL +#define TX4927_REG_BASE 0xff1f0000UL #endif -#define TX4927_REG_SIZE 0x00010000 +#define TX4927_REG_SIZE 0x00010000 #define TX4927_SDRAMC_REG (TX4927_REG_BASE + 0x8000) #define TX4927_EBUSC_REG (TX4927_REG_BASE + 0x9000) @@ -118,10 +118,10 @@ struct tx4927_ccfg_reg { #define TX4927_CCFG_DIVMODE_2 (0x4 << 17) #define TX4927_CCFG_DIVMODE_3 (0x5 << 17) #define TX4927_CCFG_DIVMODE_4 (0x6 << 17) -#define TX4927_CCFG_DIVMODE_2_5 (0x7 << 17) +#define TX4927_CCFG_DIVMODE_2_5 (0x7 << 17) #define TX4927_CCFG_BEOW 0x00010000 #define TX4927_CCFG_WR 0x00008000 -#define TX4927_CCFG_TOE 0x00004000 +#define TX4927_CCFG_TOE 0x00004000 #define TX4927_CCFG_PCIARB 0x00002000 #define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 #define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 @@ -136,10 +136,10 @@ struct tx4927_ccfg_reg { /* PCFG : Pin Configuration */ #define TX4927_PCFG_SDCLKDLY_MASK 0x30000000 -#define TX4927_PCFG_SDCLKDLY(d) ((d)<<28) +#define TX4927_PCFG_SDCLKDLY(d) ((d)<<28) #define TX4927_PCFG_SYSCLKEN 0x08000000 -#define TX4927_PCFG_SDCLKEN_ALL 0x07800000 -#define TX4927_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) +#define TX4927_PCFG_SDCLKEN_ALL 0x07800000 +#define TX4927_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) #define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 #define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) #define TX4927_PCFG_SEL2 0x00000200 diff --git a/arch/mips/include/asm/txx9/tx4927pcic.h b/arch/mips/include/asm/txx9/tx4927pcic.h index c470b8a..9eab269 100644 --- a/arch/mips/include/asm/txx9/tx4927pcic.h +++ b/arch/mips/include/asm/txx9/tx4927pcic.h @@ -93,7 +93,7 @@ struct tx4927_pcic_reg { /* bits for PBACFG */ #define TX4927_PCIC_PBACFG_FIXPA 0x00000008 -#define TX4927_PCIC_PBACFG_RPBA 0x00000004 +#define TX4927_PCIC_PBACFG_RPBA 0x00000004 #define TX4927_PCIC_PBACFG_PBAEN 0x00000002 #define TX4927_PCIC_PBACFG_BMCEN 0x00000001 @@ -165,7 +165,7 @@ struct tx4927_pcic_reg { #define TX4927_PCIC_PDMCFG_CHNEN 0x00000080 #define TX4927_PCIC_PDMCFG_XFRACT 0x00000040 #define TX4927_PCIC_PDMCFG_BSWAP 0x00000020 -#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c +#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c #define TX4927_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000 #define TX4927_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004 #define TX4927_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008 @@ -174,7 +174,7 @@ struct tx4927_pcic_reg { /* bits for PDMSTS */ #define TX4927_PCIC_PDMSTS_REQCNT_MASK 0x3f000000 -#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 +#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 #define TX4927_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000 #define TX4927_PCIC_PDMSTS_FIFORP_MASK 0x00030000 #define TX4927_PCIC_PDMSTS_ERRINT 0x00000800 diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h index 8a178f1..6ca767e 100644 --- a/arch/mips/include/asm/txx9/tx4938.h +++ b/arch/mips/include/asm/txx9/tx4938.h @@ -16,11 +16,11 @@ #include <asm/txx9/tx4927.h> #ifdef CONFIG_64BIT -#define TX4938_REG_BASE 0xffffffffff1f0000UL /* == TX4937_REG_BASE */ +#define TX4938_REG_BASE 0xffffffffff1f0000UL /* == TX4937_REG_BASE */ #else -#define TX4938_REG_BASE 0xff1f0000UL /* == TX4937_REG_BASE */ +#define TX4938_REG_BASE 0xff1f0000UL /* == TX4937_REG_BASE */ #endif -#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */ +#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */ /* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */ #define TX4938_NDFMC_REG (TX4938_REG_BASE + 0x5000) @@ -72,16 +72,16 @@ struct tx4938_ccfg_reg { #define TX4938_NUM_IR_DMA 4 #define TX4938_IR_DMA(ch, n) ((ch ? 27 : 10) + (n)) /* 10-13, 27-30 */ #define TX4938_IR_PIO 14 -#define TX4938_IR_PDMAC 15 +#define TX4938_IR_PDMAC 15 #define TX4938_IR_PCIC 16 #define TX4938_NUM_IR_TMR 3 #define TX4938_IR_TMR(n) (17 + (n)) -#define TX4938_IR_NDFMC 21 +#define TX4938_IR_NDFMC 21 #define TX4938_IR_PCIERR 22 #define TX4938_IR_PCIPME 23 #define TX4938_IR_ACLC 24 #define TX4938_IR_ACLCPME 25 -#define TX4938_IR_PCIC1 26 +#define TX4938_IR_PCIC1 26 #define TX4938_IR_SPI 31 #define TX4938_NUM_IR 32 /* multiplex */ @@ -105,10 +105,10 @@ struct tx4938_ccfg_reg { #define TX4938_CCFG_PCI1_66 0x00200000 #define TX4938_CCFG_DIVMODE_MASK 0x001e0000 #define TX4938_CCFG_DIVMODE_2 (0x4 << 17) -#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17) +#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17) #define TX4938_CCFG_DIVMODE_3 (0x5 << 17) #define TX4938_CCFG_DIVMODE_4 (0x6 << 17) -#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17) +#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17) #define TX4938_CCFG_DIVMODE_8 (0x0 << 17) #define TX4938_CCFG_DIVMODE_10 (0xb << 17) #define TX4938_CCFG_DIVMODE_12 (0x1 << 17) @@ -116,7 +116,7 @@ struct tx4938_ccfg_reg { #define TX4938_CCFG_DIVMODE_18 (0x9 << 17) #define TX4938_CCFG_BEOW 0x00010000 #define TX4938_CCFG_WR 0x00008000 -#define TX4938_CCFG_TOE 0x00004000 +#define TX4938_CCFG_TOE 0x00004000 #define TX4938_CCFG_PCIARB 0x00002000 #define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00 #define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10) @@ -141,10 +141,10 @@ struct tx4938_ccfg_reg { #define TX4938_PCFG_SPI_SEL 0x0800000000000000ULL #define TX4938_PCFG_NDF_SEL 0x0400000000000000ULL #define TX4938_PCFG_SDCLKDLY_MASK 0x30000000 -#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28) +#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28) #define TX4938_PCFG_SYSCLKEN 0x08000000 -#define TX4938_PCFG_SDCLKEN_ALL 0x07800000 -#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) +#define TX4938_PCFG_SDCLKEN_ALL 0x07800000 +#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) #define TX4938_PCFG_PCICLKEN_ALL 0x003f0000 #define TX4938_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) #define TX4938_PCFG_SEL2 0x00000200 @@ -230,8 +230,8 @@ struct tx4938_ccfg_reg { #define TX4938_DMA_CCR_XFSZ_2W TX4938_DMA_CCR_XFSZ(3) #define TX4938_DMA_CCR_XFSZ_4W TX4938_DMA_CCR_XFSZ(4) #define TX4938_DMA_CCR_XFSZ_8W TX4938_DMA_CCR_XFSZ(5) -#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6) -#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7) +#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6) +#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7) #define TX4938_DMA_CCR_MEMIO 0x00000002 #define TX4938_DMA_CCR_SNGAD 0x00000001 @@ -263,9 +263,9 @@ struct tx4938_ccfg_reg { #define TX4938_REV_PCODE() \ ((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16) -#define tx4938_ccfg_clear(bits) tx4927_ccfg_clear(bits) +#define tx4938_ccfg_clear(bits) tx4927_ccfg_clear(bits) #define tx4938_ccfg_set(bits) tx4927_ccfg_set(bits) -#define tx4938_ccfg_change(change, new) tx4927_ccfg_change(change, new) +#define tx4938_ccfg_change(change, new) tx4927_ccfg_change(change, new) #define TX4938_SDRAMC_CR(ch) TX4927_SDRAMC_CR(ch) #define TX4938_SDRAMC_BA(ch) TX4927_SDRAMC_BA(ch) diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index d4f342c..6d66708 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -14,11 +14,11 @@ #include <asm/txx9/tx4938.h> #ifdef CONFIG_64BIT -#define TX4939_REG_BASE 0xffffffffff1f0000UL /* == TX4938_REG_BASE */ +#define TX4939_REG_BASE 0xffffffffff1f0000UL /* == TX4938_REG_BASE */ #else -#define TX4939_REG_BASE 0xff1f0000UL /* == TX4938_REG_BASE */ +#define TX4939_REG_BASE 0xff1f0000UL /* == TX4938_REG_BASE */ #endif -#define TX4939_REG_SIZE 0x00010000 /* == TX4938_REG_SIZE */ +#define TX4939_REG_SIZE 0x00010000 /* == TX4938_REG_SIZE */ #define TX4939_ATA_REG(ch) (TX4939_REG_BASE + 0x3000 + (ch) * 0x1000) #define TX4939_NDFMC_REG (TX4939_REG_BASE + 0x5000) @@ -189,14 +189,14 @@ struct tx4939_vpc_desc { #define TX4939_IR_INT(n) (3 + (n)) #define TX4939_NUM_IR_ETH 2 #define TX4939_IR_ETH(n) ((n) ? 43 : 6) -#define TX4939_IR_VIDEO 7 +#define TX4939_IR_VIDEO 7 #define TX4939_IR_CIR 8 #define TX4939_NUM_IR_SIO 4 #define TX4939_IR_SIO(n) ((n) ? 43 + (n) : 9) /* 9,44-46 */ #define TX4939_NUM_IR_DMA 4 #define TX4939_IR_DMA(ch, n) (((ch) ? 22 : 10) + (n)) /* 10-13,22-25 */ #define TX4939_IR_IRC 14 -#define TX4939_IR_PDMAC 15 +#define TX4939_IR_PDMAC 15 #define TX4939_NUM_IR_TMR 6 #define TX4939_IR_TMR(n) (((n) >= 3 ? 45 : 16) + (n)) /* 16-18,48-50 */ #define TX4939_NUM_IR_ATA 2 @@ -210,10 +210,10 @@ struct tx4939_vpc_desc { #define TX4939_IR_I2C 33 #define TX4939_IR_SPI 34 #define TX4939_IR_PCIC 35 -#define TX4939_IR_PCIC1 36 +#define TX4939_IR_PCIC1 36 #define TX4939_IR_PCIERR 37 #define TX4939_IR_PCIPME 38 -#define TX4939_IR_NDFMC 39 +#define TX4939_IR_NDFMC 39 #define TX4939_IR_ACLCPME 40 #define TX4939_IR_RTC 41 #define TX4939_IR_RND 42 @@ -239,7 +239,7 @@ struct tx4939_vpc_desc { #define TX4939_CCFG_PCI66 0x00800000 #define TX4939_CCFG_PCIMODE 0x00400000 #define TX4939_CCFG_SSCG 0x00100000 -#define TX4939_CCFG_MULCLK_MASK 0x000e0000 +#define TX4939_CCFG_MULCLK_MASK 0x000e0000 #define TX4939_CCFG_MULCLK_8 (0x7 << 17) #define TX4939_CCFG_MULCLK_9 (0x0 << 17) #define TX4939_CCFG_MULCLK_10 (0x1 << 17) @@ -250,7 +250,7 @@ struct tx4939_vpc_desc { #define TX4939_CCFG_MULCLK_15 (0x6 << 17) #define TX4939_CCFG_BEOW 0x00010000 #define TX4939_CCFG_WR 0x00008000 -#define TX4939_CCFG_TOE 0x00004000 +#define TX4939_CCFG_TOE 0x00004000 #define TX4939_CCFG_PCIARB 0x00002000 #define TX4939_CCFG_YDIVMODE_MASK 0x00001c00 #define TX4939_CCFG_YDIVMODE_2 (0x0 << 10) @@ -275,7 +275,7 @@ struct tx4939_vpc_desc { #define TX4939_PCFG_I2CMODE 0x1000000000000000ULL #define TX4939_PCFG_I2SMODE_MASK 0x0c00000000000000ULL #define TX4939_PCFG_I2SMODE_GPIO 0x0c00000000000000ULL -#define TX4939_PCFG_I2SMODE_I2S 0x0800000000000000ULL +#define TX4939_PCFG_I2SMODE_I2S 0x0800000000000000ULL #define TX4939_PCFG_I2SMODE_I2S_ALT 0x0400000000000000ULL #define TX4939_PCFG_I2SMODE_ACLC 0x0000000000000000ULL #define TX4939_PCFG_SIO3MODE 0x0200000000000000ULL @@ -392,15 +392,15 @@ struct tx4939_vpc_desc { /* * CRYPTO */ -#define TX4939_CRYPTO_CSR_SAESO 0x08000000 -#define TX4939_CRYPTO_CSR_SAESI 0x04000000 -#define TX4939_CRYPTO_CSR_SDESO 0x02000000 -#define TX4939_CRYPTO_CSR_SDESI 0x01000000 +#define TX4939_CRYPTO_CSR_SAESO 0x08000000 +#define TX4939_CRYPTO_CSR_SAESI 0x04000000 +#define TX4939_CRYPTO_CSR_SDESO 0x02000000 +#define TX4939_CRYPTO_CSR_SDESI 0x01000000 #define TX4939_CRYPTO_CSR_INDXBST_MASK 0x00700000 #define TX4939_CRYPTO_CSR_INDXBST(n) ((n) << 20) -#define TX4939_CRYPTO_CSR_TOINT 0x00080000 -#define TX4939_CRYPTO_CSR_DCINT 0x00040000 -#define TX4939_CRYPTO_CSR_GBINT 0x00010000 +#define TX4939_CRYPTO_CSR_TOINT 0x00080000 +#define TX4939_CRYPTO_CSR_DCINT 0x00040000 +#define TX4939_CRYPTO_CSR_GBINT 0x00010000 #define TX4939_CRYPTO_CSR_INDXAST_MASK 0x0000e000 #define TX4939_CRYPTO_CSR_INDXAST(n) ((n) << 13) #define TX4939_CRYPTO_CSR_CSWAP_MASK 0x00001800 @@ -418,7 +418,7 @@ struct tx4939_vpc_desc { #define TX4939_CRYPTO_CSR_PDINT_END 0x00000040 #define TX4939_CRYPTO_CSR_PDINT_NEXT 0x00000080 #define TX4939_CRYPTO_CSR_PDINT_NONE 0x000000c0 -#define TX4939_CRYPTO_CSR_GINTE 0x00000008 +#define TX4939_CRYPTO_CSR_GINTE 0x00000008 #define TX4939_CRYPTO_CSR_RSTD 0x00000004 #define TX4939_CRYPTO_CSR_RSTC 0x00000002 #define TX4939_CRYPTO_CSR_ENCR 0x00000001 @@ -442,7 +442,7 @@ struct tx4939_vpc_desc { #define TX4939_CRYPTO_DESC_START 0x00000200 #define TX4939_CRYPTO_DESC_END 0x00000100 #define TX4939_CRYPTO_DESC_XOR 0x00000010 -#define TX4939_CRYPTO_DESC_LAST 0x00000008 +#define TX4939_CRYPTO_DESC_LAST 0x00000008 #define TX4939_CRYPTO_DESC_ERR_MASK 0x00000006 #define TX4939_CRYPTO_DESC_ERR_NONE 0x00000000 #define TX4939_CRYPTO_DESC_ERR_TOUT 0x00000002 @@ -457,7 +457,7 @@ struct tx4939_vpc_desc { #define TX4939_CRYPTO_NR_SET 6 -#define TX4939_CRYPTO_RCSR_INTE 0x00000008 +#define TX4939_CRYPTO_RCSR_INTE 0x00000008 #define TX4939_CRYPTO_RCSR_RST 0x00000004 #define TX4939_CRYPTO_RCSR_FIN 0x00000002 #define TX4939_CRYPTO_RCSR_ST 0x00000001 @@ -480,8 +480,8 @@ struct tx4939_vpc_desc { #define TX4939_VPC_CTRLA_PDINT_ALL 0x00000000 #define TX4939_VPC_CTRLA_PDINT_NEXT 0x00000010 #define TX4939_VPC_CTRLA_PDINT_NONE 0x00000030 -#define TX4939_VPC_CTRLA_VDVLDP 0x00000008 -#define TX4939_VPC_CTRLA_VDMODE 0x00000004 +#define TX4939_VPC_CTRLA_VDVLDP 0x00000008 +#define TX4939_VPC_CTRLA_VDMODE 0x00000004 #define TX4939_VPC_CTRLA_VDFOR 0x00000002 #define TX4939_VPC_CTRLA_ENVPC 0x00000001 @@ -512,9 +512,9 @@ struct tx4939_vpc_desc { ((__u32)((__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_BCFG_MASK) \ >> 32)) -#define tx4939_ccfg_clear(bits) tx4938_ccfg_clear(bits) +#define tx4939_ccfg_clear(bits) tx4938_ccfg_clear(bits) #define tx4939_ccfg_set(bits) tx4938_ccfg_set(bits) -#define tx4939_ccfg_change(change, new) tx4938_ccfg_change(change, new) +#define tx4939_ccfg_change(change, new) tx4938_ccfg_change(change, new) #define TX4939_EBUSC_CR(ch) TX4927_EBUSC_CR(ch) #define TX4939_EBUSC_BA(ch) TX4927_EBUSC_BA(ch) @@ -522,7 +522,7 @@ struct tx4939_vpc_desc { #define TX4939_EBUSC_WIDTH(ch) \ (16 >> ((__u32)(TX4939_EBUSC_CR(ch) >> 20) & 0x1)) -/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2 (14.745MHz for MST 20MHz) */ +/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2 (14.745MHz for MST 20MHz) */ #define TX4939_SCLK0(mst) \ ((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2) diff --git a/arch/mips/include/asm/txx9tmr.h b/arch/mips/include/asm/txx9tmr.h index 67f70a8..466a3de 100644 --- a/arch/mips/include/asm/txx9tmr.h +++ b/arch/mips/include/asm/txx9tmr.h @@ -59,9 +59,9 @@ void txx9_clockevent_init(unsigned long baseaddr, int irq, void txx9_tmr_init(unsigned long baseaddr); #ifdef CONFIG_CPU_TX39XX -#define TXX9_TIMER_BITS 24 +#define TXX9_TIMER_BITS 24 #else -#define TXX9_TIMER_BITS 32 +#define TXX9_TIMER_BITS 32 #endif #endif /* __ASM_TXX9TMR_H */ diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 3b92efe..bd87e36 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -87,12 +87,12 @@ extern u64 __ua_limit; /* * access_ok: - Checks if a user space pointer is valid * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that - * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe - * to write to a block, it is always safe to read from it. + * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe + * to write to a block, it is always safe to read from it. * @addr: User space pointer to start of block to check * @size: Size of block to check * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * Checks if a pointer to a block of memory in user space is valid. * @@ -124,10 +124,10 @@ extern u64 __ua_limit; /* * put_user: - Write a simple value into user space. - * @x: Value to copy to user space. + * @x: Value to copy to user space. * @ptr: Destination address, in user space. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * This macro copies a single simple value from kernel space to user * space. It supports simple types like char and int, but not larger @@ -138,15 +138,15 @@ extern u64 __ua_limit; * * Returns zero on success, or -EFAULT on error. */ -#define put_user(x,ptr) \ +#define put_user(x,ptr) \ __put_user_check((x), (ptr), sizeof(*(ptr))) /* * get_user: - Get a simple variable from user space. - * @x: Variable to store result. + * @x: Variable to store result. * @ptr: Source address, in user space. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * This macro copies a single simple variable from user space to kernel * space. It supports simple types like char and int, but not larger @@ -163,10 +163,10 @@ extern u64 __ua_limit; /* * __put_user: - Write a simple value into user space, with less checking. - * @x: Value to copy to user space. + * @x: Value to copy to user space. * @ptr: Destination address, in user space. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * This macro copies a single simple value from kernel space to user * space. It supports simple types like char and int, but not larger @@ -185,10 +185,10 @@ extern u64 __ua_limit; /* * __get_user: - Get a simple variable from user space, with less checking. - * @x: Variable to store result. + * @x: Variable to store result. * @ptr: Source address, in user space. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * This macro copies a single simple variable from user space to kernel * space. It supports simple types like char and int, but not larger @@ -390,10 +390,10 @@ extern void __put_user_unknown(void); /* * put_user_unaligned: - Write a simple value into user space. - * @x: Value to copy to user space. + * @x: Value to copy to user space. * @ptr: Destination address, in user space. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * This macro copies a single simple value from kernel space to user * space. It supports simple types like char and int, but not larger @@ -409,10 +409,10 @@ extern void __put_user_unknown(void); /* * get_user_unaligned: - Get a simple variable from user space. - * @x: Variable to store result. + * @x: Variable to store result. * @ptr: Source address, in user space. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * This macro copies a single simple variable from user space to kernel * space. It supports simple types like char and int, but not larger @@ -429,10 +429,10 @@ extern void __put_user_unknown(void); /* * __put_user_unaligned: - Write a simple value into user space, with less checking. - * @x: Value to copy to user space. + * @x: Value to copy to user space. * @ptr: Destination address, in user space. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * This macro copies a single simple value from kernel space to user * space. It supports simple types like char and int, but not larger @@ -451,10 +451,10 @@ extern void __put_user_unknown(void); /* * __get_user_unaligned: - Get a simple variable from user space, with less checking. - * @x: Variable to store result. + * @x: Variable to store result. * @ptr: Source address, in user space. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * This macro copies a single simple variable from user space to kernel * space. It supports simple types like char and int, but not larger @@ -543,7 +543,7 @@ do { \ */ #define __get_user_unaligned_asm_ll32(val, addr) \ { \ - unsigned long long __gu_tmp; \ + unsigned long long __gu_tmp; \ \ __asm__ __volatile__( \ "1: ulw %1, (%3) \n" \ @@ -631,7 +631,7 @@ do { \ #define __put_user_unaligned_asm_ll32(ptr) \ { \ __asm__ __volatile__( \ - "1: sw %2, (%3) # __put_user_unaligned_asm_ll32 \n" \ + "1: sw %2, (%3) # __put_user_unaligned_asm_ll32 \n" \ "2: sw %D2, 4(%3) \n" \ "3: \n" \ " .section .fixup,\"ax\" \n" \ @@ -658,7 +658,7 @@ extern void __put_user_unaligned_unknown(void); #ifdef MODULE #define __MODULE_JAL(destination) \ ".set\tnoat\n\t" \ - __UA_LA "\t$1, " #destination "\n\t" \ + __UA_LA "\t$1, " #destination "\n\t" \ "jalr\t$1\n\t" \ ".set\tat\n\t" #else @@ -694,11 +694,11 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); /* * __copy_to_user: - Copy a block of data into user space, with less checking. - * @to: Destination address, in user space. + * @to: Destination address, in user space. * @from: Source address, in kernel space. - * @n: Number of bytes to copy. + * @n: Number of bytes to copy. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * Copy data from kernel space to user space. Caller must check * the specified block with access_ok() before calling this function. @@ -716,7 +716,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); __cu_from = (from); \ __cu_len = (n); \ might_fault(); \ - __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ + __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ __cu_len; \ }) @@ -731,7 +731,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ - __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ + __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ __cu_len; \ }) @@ -744,18 +744,18 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ - __cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from, \ - __cu_len); \ + __cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from, \ + __cu_len); \ __cu_len; \ }) /* * copy_to_user: - Copy a block of data into user space. - * @to: Destination address, in user space. + * @to: Destination address, in user space. * @from: Source address, in kernel space. - * @n: Number of bytes to copy. + * @n: Number of bytes to copy. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * Copy data from kernel space to user space. * @@ -774,7 +774,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) { \ might_fault(); \ __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \ - __cu_len); \ + __cu_len); \ } \ __cu_len; \ }) @@ -827,11 +827,11 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); /* * __copy_from_user: - Copy a block of data from user space, with less checking. - * @to: Destination address, in kernel space. + * @to: Destination address, in kernel space. * @from: Source address, in user space. - * @n: Number of bytes to copy. + * @n: Number of bytes to copy. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * Copy data from user space to kernel space. Caller must check * the specified block with access_ok() before calling this function. @@ -853,17 +853,17 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); __cu_len = (n); \ might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ + __cu_len); \ __cu_len; \ }) /* * copy_from_user: - Copy a block of data from user space. - * @to: Destination address, in kernel space. + * @to: Destination address, in kernel space. * @from: Source address, in user space. - * @n: Number of bytes to copy. + * @n: Number of bytes to copy. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * Copy data from user space to kernel space. * @@ -885,7 +885,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); if (access_ok(VERIFY_READ, __cu_from, __cu_len)) { \ might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ + __cu_len); \ } \ __cu_len; \ }) @@ -901,7 +901,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); __cu_len = (n); \ might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ + __cu_len); \ __cu_len; \ }) @@ -915,18 +915,18 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); __cu_from = (from); \ __cu_len = (n); \ if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \ - access_ok(VERIFY_WRITE, __cu_to, __cu_len))) { \ + access_ok(VERIFY_WRITE, __cu_to, __cu_len))) { \ might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ + __cu_len); \ } \ __cu_len; \ }) /* * __clear_user: - Zero a block of memory in user space, with less checking. - * @to: Destination address, in user space. - * @n: Number of bytes to zero. + * @to: Destination address, in user space. + * @n: Number of bytes to zero. * * Zero a block of memory in user space. Caller must check * the specified block with access_ok() before calling this function. @@ -966,7 +966,7 @@ __clear_user(void __user *addr, __kernel_size_t size) /* * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking. * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. + * least @count bytes long. * @src: Source address, in user space. * @count: Maximum number of bytes to copy, including the trailing NUL. * @@ -1005,7 +1005,7 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len) /* * strncpy_from_user: - Copy a NUL terminated string from userspace. * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. + * least @count bytes long. * @src: Source address, in user space. * @count: Maximum number of bytes to copy, including the trailing NUL. * @@ -1060,7 +1060,7 @@ static inline long __strlen_user(const char __user *s) * strlen_user: - Get the size of a string in user space. * @str: The string to measure. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * Get the size of a NUL-terminated string in user space. * @@ -1108,7 +1108,7 @@ static inline long __strnlen_user(const char __user *s, long n) * strlen_user: - Get the size of a string in user space. * @str: The string to measure. * - * Context: User context only. This function may sleep. + * Context: User context only. This function may sleep. * * Get the size of a NUL-terminated string in user space. * diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h index 7e0bf17..058e941 100644 --- a/arch/mips/include/asm/uasm.h +++ b/arch/mips/include/asm/uasm.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer + * Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer * Copyright (C) 2005 Maciej W. Rozycki * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 2012 MIPS Technologies, Inc. diff --git a/arch/mips/include/asm/user.h b/arch/mips/include/asm/user.h index afa83a4..6bad61b 100644 --- a/arch/mips/include/asm/user.h +++ b/arch/mips/include/asm/user.h @@ -20,7 +20,7 @@ * upage: 1 page consisting of a user struct that tells gdb * what is present in the file. Directly after this is a * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers + * but it may come in handy at some point. All of the registers * are stored as part of the upage. The upage should always be * only one page long. * data: The data segment follows next. We use current->end_text to diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h index c231a3d..a866918 100644 --- a/arch/mips/include/asm/vr41xx/pci.h +++ b/arch/mips/include/asm/vr41xx/pci.h @@ -20,7 +20,7 @@ #ifndef __NEC_VR41XX_PCI_H #define __NEC_VR41XX_PCI_H -#define PCI_MASTER_ADDRESS_MASK 0x7fffffffU +#define PCI_MASTER_ADDRESS_MASK 0x7fffffffU struct pci_master_address_conversion { uint32_t bus_base_address; diff --git a/arch/mips/include/asm/vr41xx/tb0287.h b/arch/mips/include/asm/vr41xx/tb0287.h index 61bead6..d58b567 100644 --- a/arch/mips/include/asm/vr41xx/tb0287.h +++ b/arch/mips/include/asm/vr41xx/tb0287.h @@ -1,7 +1,7 @@ /* * tb0287.h, Include file for TANBAC TB0287 mini-ITX board. * - * Copyright (C) 2005 Media Lab Inc. <ito@mlb.co.jp> + * Copyright (C) 2005 Media Lab Inc. <ito@mlb.co.jp> * * This code is largely based on tb0219.h. * diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h index 65e3445..9344e24 100644 --- a/arch/mips/include/asm/war.h +++ b/arch/mips/include/asm/war.h @@ -83,30 +83,30 @@ #endif /* - * Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata: + * Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata: * * 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D, - * Hit_Invalidate_D and Create_Dirty_Excl_D should only be - * executed if there is no other dcache activity. If the dcache is - * accessed for another instruction immeidately preceding when these - * cache instructions are executing, it is possible that the dcache - * tag match outputs used by these cache instructions will be - * incorrect. These cache instructions should be preceded by at least - * four instructions that are not any kind of load or store - * instruction. - * - * This is not allowed: lw - * nop - * nop - * nop - * cache Hit_Writeback_Invalidate_D - * - * This is allowed: lw - * nop - * nop - * nop - * nop - * cache Hit_Writeback_Invalidate_D + * Hit_Invalidate_D and Create_Dirty_Excl_D should only be + * executed if there is no other dcache activity. If the dcache is + * accessed for another instruction immeidately preceding when these + * cache instructions are executing, it is possible that the dcache + * tag match outputs used by these cache instructions will be + * incorrect. These cache instructions should be preceded by at least + * four instructions that are not any kind of load or store + * instruction. + * + * This is not allowed: lw + * nop + * nop + * nop + * cache Hit_Writeback_Invalidate_D + * + * This is allowed: lw + * nop + * nop + * nop + * nop + * cache Hit_Writeback_Invalidate_D */ #ifndef R4600_V1_HIT_CACHEOP_WAR #error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform @@ -118,7 +118,7 @@ * * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D, * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only - * operate correctly if the internal data cache refill buffer is empty. These + * operate correctly if the internal data cache refill buffer is empty. These * CACHE instructions should be separated from any potential data cache miss * by a load instruction to an uncached address to empty the response buffer." * (Revision 2.0 device errata from IDT available on http://www.idt.com/ diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h index 79bac88..680e7ef 100644 --- a/arch/mips/include/asm/xtalk/xtalk.h +++ b/arch/mips/include/asm/xtalk/xtalk.h @@ -16,15 +16,15 @@ /* * User-level device driver visible types */ -typedef char xwidgetnum_t; /* xtalk widget number (0..15) */ +typedef char xwidgetnum_t; /* xtalk widget number (0..15) */ #define XWIDGET_NONE -1 -typedef int xwidget_part_num_t; /* xtalk widget part number */ +typedef int xwidget_part_num_t; /* xtalk widget part number */ #define XWIDGET_PART_NUM_NONE -1 -typedef int xwidget_rev_num_t; /* xtalk widget revision number */ +typedef int xwidget_rev_num_t; /* xtalk widget revision number */ #define XWIDGET_REV_NUM_NONE -1 @@ -37,15 +37,15 @@ typedef struct xtalk_piomap_s *xtalk_piomap_t; /* It is often convenient to fold the XIO target port * number into the XIO address. */ -#define XIO_NOWHERE (0xFFFFFFFFFFFFFFFFull) -#define XIO_ADDR_BITS (0x0000FFFFFFFFFFFFull) -#define XIO_PORT_BITS (0xF000000000000000ull) -#define XIO_PORT_SHIFT (60) - -#define XIO_PACKED(x) (((x)&XIO_PORT_BITS) != 0) -#define XIO_ADDR(x) ((x)&XIO_ADDR_BITS) -#define XIO_PORT(x) ((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT)) -#define XIO_PACK(p, o) ((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS)) +#define XIO_NOWHERE (0xFFFFFFFFFFFFFFFFull) +#define XIO_ADDR_BITS (0x0000FFFFFFFFFFFFull) +#define XIO_PORT_BITS (0xF000000000000000ull) +#define XIO_PORT_SHIFT (60) + +#define XIO_PACKED(x) (((x)&XIO_PORT_BITS) != 0) +#define XIO_ADDR(x) ((x)&XIO_ADDR_BITS) +#define XIO_PORT(x) ((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT)) +#define XIO_PACK(p, o) ((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS)) #endif /* !__ASSEMBLY__ */ diff --git a/arch/mips/include/asm/xtalk/xwidget.h b/arch/mips/include/asm/xtalk/xwidget.h index b4a13d7..32e4e88 100644 --- a/arch/mips/include/asm/xtalk/xwidget.h +++ b/arch/mips/include/asm/xtalk/xwidget.h @@ -45,12 +45,12 @@ #define WIDGET_PENDING 0x0000001f /* WIDGET_ERR_UPPER_ADDR */ -#define WIDGET_ERR_UPPER_ADDR_ONLY 0x0000ffff +#define WIDGET_ERR_UPPER_ADDR_ONLY 0x0000ffff /* WIDGET_CONTROL */ #define WIDGET_F_BAD_PKT 0x00010000 #define WIDGET_LLP_XBAR_CRD 0x0000f000 -#define WIDGET_LLP_XBAR_CRD_SHFT 12 +#define WIDGET_LLP_XBAR_CRD_SHFT 12 #define WIDGET_CLR_RLLP_CNT 0x00000800 #define WIDGET_CLR_TLLP_CNT 0x00000400 #define WIDGET_SYS_END 0x00000200 @@ -86,8 +86,8 @@ /* * according to the crosstalk spec, only 32-bits access to the widget - * configuration registers is allowed. some widgets may allow 64-bits - * access but software should not depend on it. registers beyond the + * configuration registers is allowed. some widgets may allow 64-bits + * access but software should not depend on it. registers beyond the * widget target flush register are widget dependent thus will not be * defined here */ diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild index 77d4fb3..350cccc 100644 --- a/arch/mips/include/uapi/asm/Kbuild +++ b/arch/mips/include/uapi/asm/Kbuild @@ -8,6 +8,7 @@ header-y += byteorder.h header-y += cachectl.h header-y += errno.h header-y += fcntl.h +header-y += inst.h header-y += ioctl.h header-y += ioctls.h header-y += ipcbuf.h diff --git a/arch/mips/include/uapi/asm/break.h b/arch/mips/include/uapi/asm/break.h index 9161e68..002c39e 100644 --- a/arch/mips/include/uapi/asm/break.h +++ b/arch/mips/include/uapi/asm/break.h @@ -6,8 +6,8 @@ * Copyright (C) 1995, 2003 by Ralf Baechle * Copyright (C) 1999 Silicon Graphics, Inc. */ -#ifndef __ASM_BREAK_H -#define __ASM_BREAK_H +#ifndef __UAPI_ASM_BREAK_H +#define __UAPI_ASM_BREAK_H /* * The following break codes are or were in use for specific purposes in @@ -16,22 +16,14 @@ * non-Linux/MIPS object files or make use of them in the future. */ #define BRK_USERBP 0 /* User bp (used by debuggers) */ -#define BRK_KERNELBP 1 /* Break in the kernel */ -#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */ -#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */ -#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */ #define BRK_SSTEPBP 5 /* User bp (used by debuggers) */ #define BRK_OVERFLOW 6 /* Overflow check */ #define BRK_DIVZERO 7 /* Divide by zero check */ #define BRK_RANGE 8 /* Range error check */ -#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */ -#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */ -#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */ -#define BRK_BUG 512 /* Used by BUG() */ -#define BRK_KDB 513 /* Used in KDB_ENTER() */ +#define BRK_BUG 12 /* Used by BUG() */ #define BRK_MEMU 514 /* Used by FPU emulator */ #define BRK_KPROBE_BP 515 /* Kprobe break */ #define BRK_KPROBE_SSTEPBP 516 /* Kprobe single step software implementation */ #define BRK_MULOVF 1023 /* Multiply overflow */ -#endif /* __ASM_BREAK_H */ +#endif /* __UAPI_ASM_BREAK_H */ diff --git a/arch/mips/include/uapi/asm/cachectl.h b/arch/mips/include/uapi/asm/cachectl.h index f3ce721..2303909 100644 --- a/arch/mips/include/uapi/asm/cachectl.h +++ b/arch/mips/include/uapi/asm/cachectl.h @@ -5,15 +5,15 @@ * * Copyright (C) 1994, 1995, 1996 by Ralf Baechle */ -#ifndef _ASM_CACHECTL -#define _ASM_CACHECTL +#ifndef _ASM_CACHECTL +#define _ASM_CACHECTL /* * Options for cacheflush system call */ -#define ICACHE (1<<0) /* flush instruction cache */ -#define DCACHE (1<<1) /* writeback and flush data cache */ -#define BCACHE (ICACHE|DCACHE) /* flush both caches */ +#define ICACHE (1<<0) /* flush instruction cache */ +#define DCACHE (1<<1) /* writeback and flush data cache */ +#define BCACHE (ICACHE|DCACHE) /* flush both caches */ /* * Caching modes for the cachectl(2) call diff --git a/arch/mips/include/uapi/asm/errno.h b/arch/mips/include/uapi/asm/errno.h index bd67b15..31575e2f 100644 --- a/arch/mips/include/uapi/asm/errno.h +++ b/arch/mips/include/uapi/asm/errno.h @@ -14,95 +14,95 @@ #include <asm-generic/errno-base.h> -#define ENOMSG 35 /* No message of desired type */ -#define EIDRM 36 /* Identifier removed */ -#define ECHRNG 37 /* Channel number out of range */ -#define EL2NSYNC 38 /* Level 2 not synchronized */ -#define EL3HLT 39 /* Level 3 halted */ -#define EL3RST 40 /* Level 3 reset */ -#define ELNRNG 41 /* Link number out of range */ -#define EUNATCH 42 /* Protocol driver not attached */ -#define ENOCSI 43 /* No CSI structure available */ -#define EL2HLT 44 /* Level 2 halted */ -#define EDEADLK 45 /* Resource deadlock would occur */ -#define ENOLCK 46 /* No record locks available */ -#define EBADE 50 /* Invalid exchange */ -#define EBADR 51 /* Invalid request descriptor */ -#define EXFULL 52 /* Exchange full */ -#define ENOANO 53 /* No anode */ -#define EBADRQC 54 /* Invalid request code */ -#define EBADSLT 55 /* Invalid slot */ -#define EDEADLOCK 56 /* File locking deadlock error */ -#define EBFONT 59 /* Bad font file format */ -#define ENOSTR 60 /* Device not a stream */ -#define ENODATA 61 /* No data available */ -#define ETIME 62 /* Timer expired */ -#define ENOSR 63 /* Out of streams resources */ -#define ENONET 64 /* Machine is not on the network */ -#define ENOPKG 65 /* Package not installed */ -#define EREMOTE 66 /* Object is remote */ -#define ENOLINK 67 /* Link has been severed */ -#define EADV 68 /* Advertise error */ -#define ESRMNT 69 /* Srmount error */ -#define ECOMM 70 /* Communication error on send */ -#define EPROTO 71 /* Protocol error */ -#define EDOTDOT 73 /* RFS specific error */ -#define EMULTIHOP 74 /* Multihop attempted */ -#define EBADMSG 77 /* Not a data message */ -#define ENAMETOOLONG 78 /* File name too long */ -#define EOVERFLOW 79 /* Value too large for defined data type */ -#define ENOTUNIQ 80 /* Name not unique on network */ -#define EBADFD 81 /* File descriptor in bad state */ -#define EREMCHG 82 /* Remote address changed */ -#define ELIBACC 83 /* Can not access a needed shared library */ -#define ELIBBAD 84 /* Accessing a corrupted shared library */ -#define ELIBSCN 85 /* .lib section in a.out corrupted */ -#define ELIBMAX 86 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 87 /* Cannot exec a shared library directly */ -#define EILSEQ 88 /* Illegal byte sequence */ -#define ENOSYS 89 /* Function not implemented */ -#define ELOOP 90 /* Too many symbolic links encountered */ -#define ERESTART 91 /* Interrupted system call should be restarted */ -#define ESTRPIPE 92 /* Streams pipe error */ -#define ENOTEMPTY 93 /* Directory not empty */ -#define EUSERS 94 /* Too many users */ -#define ENOTSOCK 95 /* Socket operation on non-socket */ -#define EDESTADDRREQ 96 /* Destination address required */ -#define EMSGSIZE 97 /* Message too long */ -#define EPROTOTYPE 98 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 99 /* Protocol not available */ -#define EPROTONOSUPPORT 120 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 121 /* Socket type not supported */ -#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 123 /* Protocol family not supported */ -#define EAFNOSUPPORT 124 /* Address family not supported by protocol */ -#define EADDRINUSE 125 /* Address already in use */ -#define EADDRNOTAVAIL 126 /* Cannot assign requested address */ -#define ENETDOWN 127 /* Network is down */ -#define ENETUNREACH 128 /* Network is unreachable */ -#define ENETRESET 129 /* Network dropped connection because of reset */ -#define ECONNABORTED 130 /* Software caused connection abort */ -#define ECONNRESET 131 /* Connection reset by peer */ -#define ENOBUFS 132 /* No buffer space available */ -#define EISCONN 133 /* Transport endpoint is already connected */ -#define ENOTCONN 134 /* Transport endpoint is not connected */ -#define EUCLEAN 135 /* Structure needs cleaning */ -#define ENOTNAM 137 /* Not a XENIX named type file */ -#define ENAVAIL 138 /* No XENIX semaphores available */ -#define EISNAM 139 /* Is a named type file */ -#define EREMOTEIO 140 /* Remote I/O error */ +#define ENOMSG 35 /* No message of desired type */ +#define EIDRM 36 /* Identifier removed */ +#define ECHRNG 37 /* Channel number out of range */ +#define EL2NSYNC 38 /* Level 2 not synchronized */ +#define EL3HLT 39 /* Level 3 halted */ +#define EL3RST 40 /* Level 3 reset */ +#define ELNRNG 41 /* Link number out of range */ +#define EUNATCH 42 /* Protocol driver not attached */ +#define ENOCSI 43 /* No CSI structure available */ +#define EL2HLT 44 /* Level 2 halted */ +#define EDEADLK 45 /* Resource deadlock would occur */ +#define ENOLCK 46 /* No record locks available */ +#define EBADE 50 /* Invalid exchange */ +#define EBADR 51 /* Invalid request descriptor */ +#define EXFULL 52 /* Exchange full */ +#define ENOANO 53 /* No anode */ +#define EBADRQC 54 /* Invalid request code */ +#define EBADSLT 55 /* Invalid slot */ +#define EDEADLOCK 56 /* File locking deadlock error */ +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EDOTDOT 73 /* RFS specific error */ +#define EMULTIHOP 74 /* Multihop attempted */ +#define EBADMSG 77 /* Not a data message */ +#define ENAMETOOLONG 78 /* File name too long */ +#define EOVERFLOW 79 /* Value too large for defined data type */ +#define ENOTUNIQ 80 /* Name not unique on network */ +#define EBADFD 81 /* File descriptor in bad state */ +#define EREMCHG 82 /* Remote address changed */ +#define ELIBACC 83 /* Can not access a needed shared library */ +#define ELIBBAD 84 /* Accessing a corrupted shared library */ +#define ELIBSCN 85 /* .lib section in a.out corrupted */ +#define ELIBMAX 86 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 87 /* Cannot exec a shared library directly */ +#define EILSEQ 88 /* Illegal byte sequence */ +#define ENOSYS 89 /* Function not implemented */ +#define ELOOP 90 /* Too many symbolic links encountered */ +#define ERESTART 91 /* Interrupted system call should be restarted */ +#define ESTRPIPE 92 /* Streams pipe error */ +#define ENOTEMPTY 93 /* Directory not empty */ +#define EUSERS 94 /* Too many users */ +#define ENOTSOCK 95 /* Socket operation on non-socket */ +#define EDESTADDRREQ 96 /* Destination address required */ +#define EMSGSIZE 97 /* Message too long */ +#define EPROTOTYPE 98 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 99 /* Protocol not available */ +#define EPROTONOSUPPORT 120 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 121 /* Socket type not supported */ +#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 123 /* Protocol family not supported */ +#define EAFNOSUPPORT 124 /* Address family not supported by protocol */ +#define EADDRINUSE 125 /* Address already in use */ +#define EADDRNOTAVAIL 126 /* Cannot assign requested address */ +#define ENETDOWN 127 /* Network is down */ +#define ENETUNREACH 128 /* Network is unreachable */ +#define ENETRESET 129 /* Network dropped connection because of reset */ +#define ECONNABORTED 130 /* Software caused connection abort */ +#define ECONNRESET 131 /* Connection reset by peer */ +#define ENOBUFS 132 /* No buffer space available */ +#define EISCONN 133 /* Transport endpoint is already connected */ +#define ENOTCONN 134 /* Transport endpoint is not connected */ +#define EUCLEAN 135 /* Structure needs cleaning */ +#define ENOTNAM 137 /* Not a XENIX named type file */ +#define ENAVAIL 138 /* No XENIX semaphores available */ +#define EISNAM 139 /* Is a named type file */ +#define EREMOTEIO 140 /* Remote I/O error */ #define EINIT 141 /* Reserved */ #define EREMDEV 142 /* Error 142 */ -#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 144 /* Too many references: cannot splice */ -#define ETIMEDOUT 145 /* Connection timed out */ -#define ECONNREFUSED 146 /* Connection refused */ -#define EHOSTDOWN 147 /* Host is down */ -#define EHOSTUNREACH 148 /* No route to host */ -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define EALREADY 149 /* Operation already in progress */ -#define EINPROGRESS 150 /* Operation now in progress */ -#define ESTALE 151 /* Stale NFS file handle */ +#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 144 /* Too many references: cannot splice */ +#define ETIMEDOUT 145 /* Connection timed out */ +#define ECONNREFUSED 146 /* Connection refused */ +#define EHOSTDOWN 147 /* Host is down */ +#define EHOSTUNREACH 148 /* No route to host */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define EALREADY 149 /* Operation already in progress */ +#define EINPROGRESS 150 /* Operation now in progress */ +#define ESTALE 151 /* Stale NFS file handle */ #define ECANCELED 158 /* AIO operation canceled */ /* @@ -110,16 +110,16 @@ */ #define ENOMEDIUM 159 /* No medium found */ #define EMEDIUMTYPE 160 /* Wrong medium type */ -#define ENOKEY 161 /* Required key not available */ -#define EKEYEXPIRED 162 /* Key has expired */ -#define EKEYREVOKED 163 /* Key has been revoked */ -#define EKEYREJECTED 164 /* Key was rejected by service */ +#define ENOKEY 161 /* Required key not available */ +#define EKEYEXPIRED 162 /* Key has expired */ +#define EKEYREVOKED 163 /* Key has been revoked */ +#define EKEYREJECTED 164 /* Key was rejected by service */ /* for robust mutexes */ -#define EOWNERDEAD 165 /* Owner died */ -#define ENOTRECOVERABLE 166 /* State not recoverable */ +#define EOWNERDEAD 165 /* Owner died */ +#define ENOTRECOVERABLE 166 /* State not recoverable */ -#define ERFKILL 167 /* Operation not possible due to RF-kill */ +#define ERFKILL 167 /* Operation not possible due to RF-kill */ #define EHWPOISON 168 /* Memory page has hardware error */ diff --git a/arch/mips/include/uapi/asm/fcntl.h b/arch/mips/include/uapi/asm/fcntl.h index 75edded..0bda78f 100644 --- a/arch/mips/include/uapi/asm/fcntl.h +++ b/arch/mips/include/uapi/asm/fcntl.h @@ -12,7 +12,7 @@ #define O_APPEND 0x0008 #define O_DSYNC 0x0010 /* used to be O_SYNC, see below */ #define O_NONBLOCK 0x0080 -#define O_CREAT 0x0100 /* not fcntl */ +#define O_CREAT 0x0100 /* not fcntl */ #define O_TRUNC 0x0200 /* not fcntl */ #define O_EXCL 0x0400 /* not fcntl */ #define O_NOCTTY 0x0800 /* not fcntl */ @@ -50,7 +50,7 @@ /* * The flavours of struct flock. "struct flock" is the ABI compliant - * variant. Finally struct flock64 is the LFS variant of struct flock. As + * variant. Finally struct flock64 is the LFS variant of struct flock. As * a historic accident and inconsistence with the ABI definition it doesn't * contain all the same fields as struct flock. */ diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h new file mode 100644 index 0000000..4d07881 --- /dev/null +++ b/arch/mips/include/uapi/asm/inst.h @@ -0,0 +1,331 @@ +/* + * Format of an instruction in memory. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 2000 by Ralf Baechle + * Copyright (C) 2006 by Thiemo Seufer + */ +#ifndef _UAPI_ASM_INST_H +#define _UAPI_ASM_INST_H + +/* + * Major opcodes; before MIPS IV cop1x was called cop3. + */ +enum major_op { + spec_op, bcond_op, j_op, jal_op, + beq_op, bne_op, blez_op, bgtz_op, + addi_op, addiu_op, slti_op, sltiu_op, + andi_op, ori_op, xori_op, lui_op, + cop0_op, cop1_op, cop2_op, cop1x_op, + beql_op, bnel_op, blezl_op, bgtzl_op, + daddi_op, daddiu_op, ldl_op, ldr_op, + spec2_op, jalx_op, mdmx_op, spec3_op, + lb_op, lh_op, lwl_op, lw_op, + lbu_op, lhu_op, lwr_op, lwu_op, + sb_op, sh_op, swl_op, sw_op, + sdl_op, sdr_op, swr_op, cache_op, + ll_op, lwc1_op, lwc2_op, pref_op, + lld_op, ldc1_op, ldc2_op, ld_op, + sc_op, swc1_op, swc2_op, major_3b_op, + scd_op, sdc1_op, sdc2_op, sd_op +}; + +/* + * func field of spec opcode. + */ +enum spec_op { + sll_op, movc_op, srl_op, sra_op, + sllv_op, pmon_op, srlv_op, srav_op, + jr_op, jalr_op, movz_op, movn_op, + syscall_op, break_op, spim_op, sync_op, + mfhi_op, mthi_op, mflo_op, mtlo_op, + dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op, + mult_op, multu_op, div_op, divu_op, + dmult_op, dmultu_op, ddiv_op, ddivu_op, + add_op, addu_op, sub_op, subu_op, + and_op, or_op, xor_op, nor_op, + spec3_unused_op, spec4_unused_op, slt_op, sltu_op, + dadd_op, daddu_op, dsub_op, dsubu_op, + tge_op, tgeu_op, tlt_op, tltu_op, + teq_op, spec5_unused_op, tne_op, spec6_unused_op, + dsll_op, spec7_unused_op, dsrl_op, dsra_op, + dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op +}; + +/* + * func field of spec2 opcode. + */ +enum spec2_op { + madd_op, maddu_op, mul_op, spec2_3_unused_op, + msub_op, msubu_op, /* more unused ops */ + clz_op = 0x20, clo_op, + dclz_op = 0x24, dclo_op, + sdbpp_op = 0x3f +}; + +/* + * func field of spec3 opcode. + */ +enum spec3_op { + ext_op, dextm_op, dextu_op, dext_op, + ins_op, dinsm_op, dinsu_op, dins_op, + lx_op = 0x0a, + bshfl_op = 0x20, + dbshfl_op = 0x24, + rdhwr_op = 0x3b +}; + +/* + * rt field of bcond opcodes. + */ +enum rt_op { + bltz_op, bgez_op, bltzl_op, bgezl_op, + spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07, + tgei_op, tgeiu_op, tlti_op, tltiu_op, + teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op, + bltzal_op, bgezal_op, bltzall_op, bgezall_op, + rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17, + rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b, + bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f +}; + +/* + * rs field of cop opcodes. + */ +enum cop_op { + mfc_op = 0x00, dmfc_op = 0x01, + cfc_op = 0x02, mtc_op = 0x04, + dmtc_op = 0x05, ctc_op = 0x06, + bc_op = 0x08, cop_op = 0x10, + copm_op = 0x18 +}; + +/* + * rt field of cop.bc_op opcodes + */ +enum bcop_op { + bcf_op, bct_op, bcfl_op, bctl_op +}; + +/* + * func field of cop0 coi opcodes. + */ +enum cop0_coi_func { + tlbr_op = 0x01, tlbwi_op = 0x02, + tlbwr_op = 0x06, tlbp_op = 0x08, + rfe_op = 0x10, eret_op = 0x18 +}; + +/* + * func field of cop0 com opcodes. + */ +enum cop0_com_func { + tlbr1_op = 0x01, tlbw_op = 0x02, + tlbp1_op = 0x08, dctr_op = 0x09, + dctw_op = 0x0a +}; + +/* + * fmt field of cop1 opcodes. + */ +enum cop1_fmt { + s_fmt, d_fmt, e_fmt, q_fmt, + w_fmt, l_fmt +}; + +/* + * func field of cop1 instructions using d, s or w format. + */ +enum cop1_sdw_func { + fadd_op = 0x00, fsub_op = 0x01, + fmul_op = 0x02, fdiv_op = 0x03, + fsqrt_op = 0x04, fabs_op = 0x05, + fmov_op = 0x06, fneg_op = 0x07, + froundl_op = 0x08, ftruncl_op = 0x09, + fceill_op = 0x0a, ffloorl_op = 0x0b, + fround_op = 0x0c, ftrunc_op = 0x0d, + fceil_op = 0x0e, ffloor_op = 0x0f, + fmovc_op = 0x11, fmovz_op = 0x12, + fmovn_op = 0x13, frecip_op = 0x15, + frsqrt_op = 0x16, fcvts_op = 0x20, + fcvtd_op = 0x21, fcvte_op = 0x22, + fcvtw_op = 0x24, fcvtl_op = 0x25, + fcmp_op = 0x30 +}; + +/* + * func field of cop1x opcodes (MIPS IV). + */ +enum cop1x_func { + lwxc1_op = 0x00, ldxc1_op = 0x01, + pfetch_op = 0x07, swxc1_op = 0x08, + sdxc1_op = 0x09, madd_s_op = 0x20, + madd_d_op = 0x21, madd_e_op = 0x22, + msub_s_op = 0x28, msub_d_op = 0x29, + msub_e_op = 0x2a, nmadd_s_op = 0x30, + nmadd_d_op = 0x31, nmadd_e_op = 0x32, + nmsub_s_op = 0x38, nmsub_d_op = 0x39, + nmsub_e_op = 0x3a +}; + +/* + * func field for mad opcodes (MIPS IV). + */ +enum mad_func { + madd_fp_op = 0x08, msub_fp_op = 0x0a, + nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e +}; + +/* + * func field for special3 lx opcodes (Cavium Octeon). + */ +enum lx_func { + lwx_op = 0x00, + lhx_op = 0x04, + lbux_op = 0x06, + ldx_op = 0x08, + lwux_op = 0x10, + lhux_op = 0x14, + lbx_op = 0x16, +}; + +/* + * Damn ... bitfields depend from byteorder :-( + */ +#ifdef __MIPSEB__ +#define BITFIELD_FIELD(field, more) \ + field; \ + more + +#elif defined(__MIPSEL__) + +#define BITFIELD_FIELD(field, more) \ + more \ + field; + +#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */ +#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?" +#endif + +struct j_format { + BITFIELD_FIELD(unsigned int opcode : 6, /* Jump format */ + BITFIELD_FIELD(unsigned int target : 26, + ;)) +}; + +struct i_format { /* signed immediate format */ + BITFIELD_FIELD(unsigned int opcode : 6, + BITFIELD_FIELD(unsigned int rs : 5, + BITFIELD_FIELD(unsigned int rt : 5, + BITFIELD_FIELD(signed int simmediate : 16, + ;)))) +}; + +struct u_format { /* unsigned immediate format */ + BITFIELD_FIELD(unsigned int opcode : 6, + BITFIELD_FIELD(unsigned int rs : 5, + BITFIELD_FIELD(unsigned int rt : 5, + BITFIELD_FIELD(unsigned int uimmediate : 16, + ;)))) +}; + +struct c_format { /* Cache (>= R6000) format */ + BITFIELD_FIELD(unsigned int opcode : 6, + BITFIELD_FIELD(unsigned int rs : 5, + BITFIELD_FIELD(unsigned int c_op : 3, + BITFIELD_FIELD(unsigned int cache : 2, + BITFIELD_FIELD(unsigned int simmediate : 16, + ;))))) +}; + +struct r_format { /* Register format */ + BITFIELD_FIELD(unsigned int opcode : 6, + BITFIELD_FIELD(unsigned int rs : 5, + BITFIELD_FIELD(unsigned int rt : 5, + BITFIELD_FIELD(unsigned int rd : 5, + BITFIELD_FIELD(unsigned int re : 5, + BITFIELD_FIELD(unsigned int func : 6, + ;)))))) +}; + +struct p_format { /* Performance counter format (R10000) */ + BITFIELD_FIELD(unsigned int opcode : 6, + BITFIELD_FIELD(unsigned int rs : 5, + BITFIELD_FIELD(unsigned int rt : 5, + BITFIELD_FIELD(unsigned int rd : 5, + BITFIELD_FIELD(unsigned int re : 5, + BITFIELD_FIELD(unsigned int func : 6, + ;)))))) +}; + +struct f_format { /* FPU register format */ + BITFIELD_FIELD(unsigned int opcode : 6, + BITFIELD_FIELD(unsigned int : 1, + BITFIELD_FIELD(unsigned int fmt : 4, + BITFIELD_FIELD(unsigned int rt : 5, + BITFIELD_FIELD(unsigned int rd : 5, + BITFIELD_FIELD(unsigned int re : 5, + BITFIELD_FIELD(unsigned int func : 6, + ;))))))) +}; + +struct ma_format { /* FPU multiply and add format (MIPS IV) */ + BITFIELD_FIELD(unsigned int opcode : 6, + BITFIELD_FIELD(unsigned int fr : 5, + BITFIELD_FIELD(unsigned int ft : 5, + BITFIELD_FIELD(unsigned int fs : 5, + BITFIELD_FIELD(unsigned int fd : 5, + BITFIELD_FIELD(unsigned int func : 4, + BITFIELD_FIELD(unsigned int fmt : 2, + ;))))))) +}; + +struct b_format { /* BREAK and SYSCALL */ + BITFIELD_FIELD(unsigned int opcode : 6, + BITFIELD_FIELD(unsigned int code : 20, + BITFIELD_FIELD(unsigned int func : 6, + ;))) +}; + +struct ps_format { /* MIPS-3D / paired single format */ + BITFIELD_FIELD(unsigned int opcode : 6, + BITFIELD_FIELD(unsigned int rs : 5, + BITFIELD_FIELD(unsigned int ft : 5, + BITFIELD_FIELD(unsigned int fs : 5, + BITFIELD_FIELD(unsigned int fd : 5, + BITFIELD_FIELD(unsigned int func : 6, + ;)))))) +}; + +struct v_format { /* MDMX vector format */ + BITFIELD_FIELD(unsigned int opcode : 6, + BITFIELD_FIELD(unsigned int sel : 4, + BITFIELD_FIELD(unsigned int fmt : 1, + BITFIELD_FIELD(unsigned int vt : 5, + BITFIELD_FIELD(unsigned int vs : 5, + BITFIELD_FIELD(unsigned int vd : 5, + BITFIELD_FIELD(unsigned int func : 6, + ;))))))) +}; + +union mips_instruction { + unsigned int word; + unsigned short halfword[2]; + unsigned char byte[4]; + struct j_format j_format; + struct i_format i_format; + struct u_format u_format; + struct c_format c_format; + struct r_format r_format; + struct p_format p_format; + struct f_format f_format; + struct ma_format ma_format; + struct b_format b_format; + struct ps_format ps_format; + struct v_format v_format; +}; + +#endif /* _UAPI_ASM_INST_H */ diff --git a/arch/mips/include/uapi/asm/ioctls.h b/arch/mips/include/uapi/asm/ioctls.h index addd56b..b1e6377 100644 --- a/arch/mips/include/uapi/asm/ioctls.h +++ b/arch/mips/include/uapi/asm/ioctls.h @@ -41,7 +41,7 @@ #define TIOCPKT_START 0x08 /* start output */ #define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */ #define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */ -#define TIOCPKT_IOCTL 0x40 /* state change of pty driver */ +#define TIOCPKT_IOCTL 0x40 /* state change of pty driver */ #define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */ #define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */ #define TIOCNOTTY 0x5471 /* void tty association */ @@ -63,9 +63,9 @@ #define FIONREAD 0x467f #define TIOCINQ FIONREAD -#define TIOCGETP 0x7408 -#define TIOCSETP 0x7409 -#define TIOCSETN 0x740a /* TIOCSETP wo flush */ +#define TIOCGETP 0x7408 +#define TIOCSETP 0x7409 +#define TIOCSETN 0x740a /* TIOCSETP wo flush */ /* #define TIOCSETA _IOW('t', 20, struct termios) set termios struct */ /* #define TIOCSETAW _IOW('t', 21, struct termios) drain output, set */ @@ -74,9 +74,9 @@ /* #define TIOCSETD _IOW('t', 27, int) set line discipline */ /* 127-124 compat */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x7416 /* Return the session ID of FD */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x7416 /* Return the session ID of FD */ #define TCGETS2 _IOR('T', 0x2A, struct termios2) #define TCSETS2 _IOW('T', 0x2B, struct termios2) #define TCSETSW2 _IOW('T', 0x2C, struct termios2) @@ -104,10 +104,10 @@ #define TIOCGLCKTRMIOS 0x548b #define TIOCSLCKTRMIOS 0x548c #define TIOCSERGSTRUCT 0x548d /* For debugging only */ -#define TIOCSERGETLSR 0x548e /* Get line status register */ -#define TIOCSERGETMULTI 0x548f /* Get multiport config */ +#define TIOCSERGETLSR 0x548e /* Get line status register */ +#define TIOCSERGETMULTI 0x548f /* Get multiport config */ #define TIOCSERSETMULTI 0x5490 /* Set multiport config */ -#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */ +#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */ #endif /* __ASM_IOCTLS_H */ diff --git a/arch/mips/include/uapi/asm/mman.h b/arch/mips/include/uapi/asm/mman.h index 9a936ac..cfcb876 100644 --- a/arch/mips/include/uapi/asm/mman.h +++ b/arch/mips/include/uapi/asm/mman.h @@ -64,7 +64,7 @@ #define MADV_NORMAL 0 /* no further special treatment */ #define MADV_RANDOM 1 /* expect random page references */ -#define MADV_SEQUENTIAL 2 /* expect sequential page references */ +#define MADV_SEQUENTIAL 2 /* expect sequential page references */ #define MADV_WILLNEED 3 /* will need these pages */ #define MADV_DONTNEED 4 /* don't need these pages */ @@ -73,14 +73,14 @@ #define MADV_DONTFORK 10 /* don't inherit across fork */ #define MADV_DOFORK 11 /* do inherit across fork */ -#define MADV_MERGEABLE 12 /* KSM may merge identical pages */ +#define MADV_MERGEABLE 12 /* KSM may merge identical pages */ #define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */ -#define MADV_HWPOISON 100 /* poison a page for testing */ +#define MADV_HWPOISON 100 /* poison a page for testing */ #define MADV_HUGEPAGE 14 /* Worth backing with hugepages */ -#define MADV_NOHUGEPAGE 15 /* Not worth backing with hugepages */ +#define MADV_NOHUGEPAGE 15 /* Not worth backing with hugepages */ -#define MADV_DONTDUMP 16 /* Explicity exclude from the core dump, +#define MADV_DONTDUMP 16 /* Explicity exclude from the core dump, overrides the coredump filter bits */ #define MADV_DODUMP 17 /* Clear the MADV_NODUMP flag */ diff --git a/arch/mips/include/uapi/asm/ptrace.h b/arch/mips/include/uapi/asm/ptrace.h index 1bc1f52..4d58d84 100644 --- a/arch/mips/include/uapi/asm/ptrace.h +++ b/arch/mips/include/uapi/asm/ptrace.h @@ -49,8 +49,8 @@ struct pt_regs { unsigned long cp0_tcstatus; #endif /* CONFIG_MIPS_MT_SMTC */ #ifdef CONFIG_CPU_CAVIUM_OCTEON - unsigned long long mpl[3]; /* MTM{0,1,2} */ - unsigned long long mtp[3]; /* MTP{0,1,2} */ + unsigned long long mpl[3]; /* MTM{0,1,2} */ + unsigned long long mtp[3]; /* MTP{0,1,2} */ #endif } __attribute__ ((aligned (8))); @@ -67,14 +67,14 @@ struct pt_regs { #define PTRACE_GET_THREAD_AREA 25 #define PTRACE_SET_THREAD_AREA 26 -/* Calls to trace a 64bit program from a 32bit program. */ +/* Calls to trace a 64bit program from a 32bit program. */ #define PTRACE_PEEKTEXT_3264 0xc0 #define PTRACE_PEEKDATA_3264 0xc1 #define PTRACE_POKETEXT_3264 0xc2 #define PTRACE_POKEDATA_3264 0xc3 #define PTRACE_GET_THREAD_AREA_3264 0xc4 -/* Read and write watchpoint registers. */ +/* Read and write watchpoint registers. */ enum pt_watch_style { pt_watch_style_mips32, pt_watch_style_mips64 diff --git a/arch/mips/include/uapi/asm/sembuf.h b/arch/mips/include/uapi/asm/sembuf.h index 7281a4d..e1085ac 100644 --- a/arch/mips/include/uapi/asm/sembuf.h +++ b/arch/mips/include/uapi/asm/sembuf.h @@ -12,8 +12,8 @@ struct semid64_ds { struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - __kernel_time_t sem_ctime; /* last change time */ + __kernel_time_t sem_otime; /* last semop time */ + __kernel_time_t sem_ctime; /* last change time */ unsigned long sem_nsems; /* no. of semaphores in array */ unsigned long __unused1; unsigned long __unused2; diff --git a/arch/mips/include/uapi/asm/siginfo.h b/arch/mips/include/uapi/asm/siginfo.h index 7344650..6a87141 100644 --- a/arch/mips/include/uapi/asm/siginfo.h +++ b/arch/mips/include/uapi/asm/siginfo.h @@ -11,7 +11,7 @@ #define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(long) + 2*sizeof(int)) -#undef __ARCH_SI_TRAPNO /* exception code needs to fill this ... */ +#undef __ARCH_SI_TRAPNO /* exception code needs to fill this ... */ #define HAVE_ARCH_SIGINFO_T @@ -55,7 +55,7 @@ typedef struct siginfo { int _overrun; /* overrun count */ char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)]; sigval_t _sigval; /* same as below */ - int _sys_private; /* not to be passed to user */ + int _sys_private; /* not to be passed to user */ } _timer; /* POSIX.1b signals */ @@ -91,9 +91,9 @@ typedef struct siginfo { short _addr_lsb; } _sigfault; - /* SIGPOLL, SIGXFSZ (To do ...) */ + /* SIGPOLL, SIGXFSZ (To do ...) */ struct { - __ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + __ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */ int _fd; } _sigpoll; } _sifields; diff --git a/arch/mips/include/uapi/asm/signal.h b/arch/mips/include/uapi/asm/signal.h index 6783c88..d6b18b4 100644 --- a/arch/mips/include/uapi/asm/signal.h +++ b/arch/mips/include/uapi/asm/signal.h @@ -24,28 +24,28 @@ typedef unsigned long old_sigset_t; /* at least 32 bits */ #define SIGHUP 1 /* Hangup (POSIX). */ #define SIGINT 2 /* Interrupt (ANSI). */ #define SIGQUIT 3 /* Quit (POSIX). */ -#define SIGILL 4 /* Illegal instruction (ANSI). */ -#define SIGTRAP 5 /* Trace trap (POSIX). */ -#define SIGIOT 6 /* IOT trap (4.2 BSD). */ -#define SIGABRT SIGIOT /* Abort (ANSI). */ +#define SIGILL 4 /* Illegal instruction (ANSI). */ +#define SIGTRAP 5 /* Trace trap (POSIX). */ +#define SIGIOT 6 /* IOT trap (4.2 BSD). */ +#define SIGABRT SIGIOT /* Abort (ANSI). */ #define SIGEMT 7 #define SIGFPE 8 /* Floating-point exception (ANSI). */ #define SIGKILL 9 /* Kill, unblockable (POSIX). */ -#define SIGBUS 10 /* BUS error (4.2 BSD). */ +#define SIGBUS 10 /* BUS error (4.2 BSD). */ #define SIGSEGV 11 /* Segmentation violation (ANSI). */ #define SIGSYS 12 -#define SIGPIPE 13 /* Broken pipe (POSIX). */ -#define SIGALRM 14 /* Alarm clock (POSIX). */ -#define SIGTERM 15 /* Termination (ANSI). */ +#define SIGPIPE 13 /* Broken pipe (POSIX). */ +#define SIGALRM 14 /* Alarm clock (POSIX). */ +#define SIGTERM 15 /* Termination (ANSI). */ #define SIGUSR1 16 /* User-defined signal 1 (POSIX). */ #define SIGUSR2 17 /* User-defined signal 2 (POSIX). */ #define SIGCHLD 18 /* Child status has changed (POSIX). */ -#define SIGCLD SIGCHLD /* Same as SIGCHLD (System V). */ +#define SIGCLD SIGCHLD /* Same as SIGCHLD (System V). */ #define SIGPWR 19 /* Power failure restart (System V). */ #define SIGWINCH 20 /* Window size change (4.3 BSD, Sun). */ #define SIGURG 21 /* Urgent condition on socket (4.2 BSD). */ -#define SIGIO 22 /* I/O now possible (4.2 BSD). */ -#define SIGPOLL SIGIO /* Pollable event occurred (System V). */ +#define SIGIO 22 /* I/O now possible (4.2 BSD). */ +#define SIGPOLL SIGIO /* Pollable event occurred (System V). */ #define SIGSTOP 23 /* Stop, unblockable (POSIX). */ #define SIGTSTP 24 /* Keyboard stop (POSIX). */ #define SIGCONT 25 /* Continue (POSIX). */ @@ -54,7 +54,7 @@ typedef unsigned long old_sigset_t; /* at least 32 bits */ #define SIGVTALRM 28 /* Virtual alarm clock (4.2 BSD). */ #define SIGPROF 29 /* Profiling alarm clock (4.2 BSD). */ #define SIGXCPU 30 /* CPU limit exceeded (4.2 BSD). */ -#define SIGXFSZ 31 /* File size limit exceeded (4.2 BSD). */ +#define SIGXFSZ 31 /* File size limit exceeded (4.2 BSD). */ /* These should not be considered constants from userland. */ #define SIGRTMIN 32 diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h index 3e68bfb..47132f4 100644 --- a/arch/mips/include/uapi/asm/socket.h +++ b/arch/mips/include/uapi/asm/socket.h @@ -24,21 +24,21 @@ SIGPIPE when they die. */ #define SO_DONTROUTE 0x0010 /* Don't do local routing. */ #define SO_BROADCAST 0x0020 /* Allow transmission of - broadcast messages. */ + broadcast messages. */ #define SO_LINGER 0x0080 /* Block on close of a reliable socket to transmit pending data. */ #define SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band. */ #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ #define SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */ -#define SO_STYLE SO_TYPE /* Synonym */ +#define SO_STYLE SO_TYPE /* Synonym */ #define SO_ERROR 0x1007 /* get error status and clear */ #define SO_SNDBUF 0x1001 /* Send buffer size. */ #define SO_RCVBUF 0x1002 /* Receive buffer. */ #define SO_SNDLOWAT 0x1003 /* send low-water mark */ #define SO_RCVLOWAT 0x1004 /* receive low-water mark */ #define SO_SNDTIMEO 0x1005 /* send timeout */ -#define SO_RCVTIMEO 0x1006 /* receive timeout */ +#define SO_RCVTIMEO 0x1006 /* receive timeout */ #define SO_ACCEPTCONN 0x1009 #define SO_PROTOCOL 0x1028 /* protocol type */ #define SO_DOMAIN 0x1029 /* domain/socket family */ @@ -59,11 +59,11 @@ #define SO_BINDTODEVICE 25 /* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 #define SO_GET_FILTER SO_ATTACH_FILTER -#define SO_PEERNAME 28 +#define SO_PEERNAME 28 #define SO_TIMESTAMP 29 #define SCM_TIMESTAMP SO_TIMESTAMP @@ -79,7 +79,7 @@ #define SO_TIMESTAMPING 37 #define SCM_TIMESTAMPING SO_TIMESTAMPING -#define SO_RXQ_OVFL 40 +#define SO_RXQ_OVFL 40 #define SO_WIFI_STATUS 41 #define SCM_WIFI_STATUS SO_WIFI_STATUS diff --git a/arch/mips/include/uapi/asm/sockios.h b/arch/mips/include/uapi/asm/sockios.h index ed1a5f7..419fbe6 100644 --- a/arch/mips/include/uapi/asm/sockios.h +++ b/arch/mips/include/uapi/asm/sockios.h @@ -14,7 +14,7 @@ /* Socket-level I/O control calls. */ #define FIOGETOWN _IOR('f', 123, int) -#define FIOSETOWN _IOW('f', 124, int) +#define FIOSETOWN _IOW('f', 124, int) #define SIOCATMARK _IOR('s', 7, int) #define SIOCSPGRP _IOW('s', 8, pid_t) diff --git a/arch/mips/include/uapi/asm/stat.h b/arch/mips/include/uapi/asm/stat.h index fe9a4c3..b47bc54 100644 --- a/arch/mips/include/uapi/asm/stat.h +++ b/arch/mips/include/uapi/asm/stat.h @@ -23,7 +23,7 @@ struct stat { __u32 st_nlink; uid_t st_uid; gid_t st_gid; - unsigned st_rdev; + unsigned st_rdev; long st_pad2[2]; off_t st_size; long st_pad3; diff --git a/arch/mips/include/uapi/asm/statfs.h b/arch/mips/include/uapi/asm/statfs.h index 0f805c7..3305c83 100644 --- a/arch/mips/include/uapi/asm/statfs.h +++ b/arch/mips/include/uapi/asm/statfs.h @@ -15,7 +15,7 @@ #include <linux/types.h> -typedef __kernel_fsid_t fsid_t; +typedef __kernel_fsid_t fsid_t; #endif @@ -31,7 +31,7 @@ struct statfs { long f_bavail; /* Linux specials */ - __kernel_fsid_t f_fsid; + __kernel_fsid_t f_fsid; long f_namelen; long f_flags; long f_spare[5]; @@ -73,7 +73,7 @@ struct statfs64 { /* Same as struct statfs */ long f_bavail; /* Linux specials */ - __kernel_fsid_t f_fsid; + __kernel_fsid_t f_fsid; long f_namelen; long f_flags; long f_spare[5]; diff --git a/arch/mips/include/uapi/asm/sysmips.h b/arch/mips/include/uapi/asm/sysmips.h index 4f47b7d..ae637e9 100644 --- a/arch/mips/include/uapi/asm/sysmips.h +++ b/arch/mips/include/uapi/asm/sysmips.h @@ -16,10 +16,10 @@ * sysmips(2) is deprecated - though some existing software uses it. * We only support the following commands. */ -#define SETNAME 1 /* set hostname */ +#define SETNAME 1 /* set hostname */ #define FLUSH_CACHE 3 /* writeback and invalidate caches */ -#define MIPS_FIXADE 7 /* control address error fixing */ -#define MIPS_RDNVRAM 10 /* read NVRAM */ -#define MIPS_ATOMIC_SET 2001 /* atomically set variable */ +#define MIPS_FIXADE 7 /* control address error fixing */ +#define MIPS_RDNVRAM 10 /* read NVRAM */ +#define MIPS_ATOMIC_SET 2001 /* atomically set variable */ #endif /* _ASM_SYSMIPS_H */ diff --git a/arch/mips/include/uapi/asm/termbits.h b/arch/mips/include/uapi/asm/termbits.h index 76630b3..2750203 100644 --- a/arch/mips/include/uapi/asm/termbits.h +++ b/arch/mips/include/uapi/asm/termbits.h @@ -53,7 +53,7 @@ struct ktermios { }; /* c_cc characters */ -#define VINTR 0 /* Interrupt character [ISIG]. */ +#define VINTR 0 /* Interrupt character [ISIG]. */ #define VQUIT 1 /* Quit character [ISIG]. */ #define VERASE 2 /* Erase character [ICANON]. */ #define VKILL 3 /* Kill-line character [ICANON]. */ @@ -72,7 +72,7 @@ struct ktermios { #define VDSUSP 11 /* Delayed suspend character [ISIG]. */ #endif #define VREPRINT 12 /* Reprint-line character [ICANON]. */ -#define VDISCARD 13 /* Discard character [IEXTEN]. */ +#define VDISCARD 13 /* Discard character [IEXTEN]. */ #define VWERASE 14 /* Word-erase character [ICANON]. */ #define VLNEXT 15 /* Literal-next character [IEXTEN]. */ #define VEOF 16 /* End-of-file character [ICANON]. */ @@ -92,7 +92,7 @@ struct ktermios { #define IXON 0002000 /* Enable start/stop output control. */ #define IXANY 0004000 /* Any character will restart after stop. */ #define IXOFF 0010000 /* Enable start/stop input control. */ -#define IMAXBEL 0020000 /* Ring bell when input queue is full. */ +#define IMAXBEL 0020000 /* Ring bell when input queue is full. */ #define IUTF8 0040000 /* Input is UTF-8 */ /* c_oflag bits */ @@ -105,123 +105,123 @@ struct ktermios { #define OFILL 0000100 #define OFDEL 0000200 #define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 +#define NL0 0000000 +#define NL1 0000400 #define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 #define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 #define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 +#define BS0 0000000 +#define BS1 0020000 #define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 +#define VT0 0000000 +#define VT1 0040000 #define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 +#define FF0 0000000 +#define FF1 0100000 /* #define PAGEOUT ??? -#define WRAP ??? +#define WRAP ??? */ /* c_cflag bit meaning */ #define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 #define EXTA B19200 #define EXTB B38400 #define CSIZE 0000060 /* Number of bits per byte (mask). */ -#define CS5 0000000 /* 5 bits per byte. */ -#define CS6 0000020 /* 6 bits per byte. */ -#define CS7 0000040 /* 7 bits per byte. */ -#define CS8 0000060 /* 8 bits per byte. */ +#define CS5 0000000 /* 5 bits per byte. */ +#define CS6 0000020 /* 6 bits per byte. */ +#define CS7 0000040 /* 7 bits per byte. */ +#define CS8 0000060 /* 8 bits per byte. */ #define CSTOPB 0000100 /* Two stop bits instead of one. */ #define CREAD 0000200 /* Enable receiver. */ #define PARENB 0000400 /* Parity enable. */ -#define PARODD 0001000 /* Odd parity instead of even. */ +#define PARODD 0001000 /* Odd parity instead of even. */ #define HUPCL 0002000 /* Hang up on last close. */ #define CLOCAL 0004000 /* Ignore modem status lines. */ #define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 #define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ #define CRTSCTS 020000000000 /* flow control */ -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ /* c_lflag bits */ #define ISIG 0000001 /* Enable signals. */ #define ICANON 0000002 /* Do erase and kill processing. */ #define XCASE 0000004 -#define ECHO 0000010 /* Enable echo. */ +#define ECHO 0000010 /* Enable echo. */ #define ECHOE 0000020 /* Visual erase for ERASE. */ -#define ECHOK 0000040 /* Echo NL after KILL. */ -#define ECHONL 0000100 /* Echo NL even if ECHO is off. */ +#define ECHOK 0000040 /* Echo NL after KILL. */ +#define ECHONL 0000100 /* Echo NL even if ECHO is off. */ #define NOFLSH 0000200 /* Disable flush after interrupt. */ #define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */ -#define ECHOCTL 0001000 /* Echo control characters as ^X. */ -#define ECHOPRT 0002000 /* Hardcopy visual erase. */ +#define ECHOCTL 0001000 /* Echo control characters as ^X. */ +#define ECHOPRT 0002000 /* Hardcopy visual erase. */ #define ECHOKE 0004000 /* Visual erase for KILL. */ #define FLUSHO 0020000 #define PENDIN 0040000 /* Retype pending input (state). */ -#define TOSTOP 0100000 /* Send SIGTTOU for background output. */ -#define ITOSTOP TOSTOP -#define EXTPROC 0200000 /* External processing on pty */ +#define TOSTOP 0100000 /* Send SIGTTOU for background output. */ +#define ITOSTOP TOSTOP +#define EXTPROC 0200000 /* External processing on pty */ /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ /* tcflow() and TCXONC use these */ -#define TCOOFF 0 /* Suspend output. */ -#define TCOON 1 /* Restart suspended output. */ -#define TCIOFF 2 /* Send a STOP character. */ -#define TCION 3 /* Send a START character. */ +#define TCOOFF 0 /* Suspend output. */ +#define TCOON 1 /* Restart suspended output. */ +#define TCIOFF 2 /* Send a STOP character. */ +#define TCION 3 /* Send a START character. */ /* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 /* Discard data received but not yet read. */ -#define TCOFLUSH 1 /* Discard data written but not yet sent. */ -#define TCIOFLUSH 2 /* Discard all pending data. */ +#define TCIFLUSH 0 /* Discard data received but not yet read. */ +#define TCOFLUSH 1 /* Discard data written but not yet sent. */ +#define TCIOFLUSH 2 /* Discard all pending data. */ /* tcsetattr uses these */ -#define TCSANOW TCSETS /* Change immediately. */ -#define TCSADRAIN TCSETSW /* Change when pending output is written. */ -#define TCSAFLUSH TCSETSF /* Flush pending input before changing. */ +#define TCSANOW TCSETS /* Change immediately. */ +#define TCSADRAIN TCSETSW /* Change when pending output is written. */ +#define TCSAFLUSH TCSETSF /* Flush pending input before changing. */ #endif /* _ASM_TERMBITS_H */ diff --git a/arch/mips/include/uapi/asm/termios.h b/arch/mips/include/uapi/asm/termios.h index 574fbdf..baeb2fa 100644 --- a/arch/mips/include/uapi/asm/termios.h +++ b/arch/mips/include/uapi/asm/termios.h @@ -31,12 +31,12 @@ struct tchars { }; struct ltchars { - char t_suspc; /* stop process signal */ - char t_dsuspc; /* delayed stop process signal */ - char t_rprntc; /* reprint line */ - char t_flushc; /* flush output (toggles) */ - char t_werasc; /* word erase */ - char t_lnextc; /* literal next character */ + char t_suspc; /* stop process signal */ + char t_dsuspc; /* delayed stop process signal */ + char t_rprntc; /* reprint line */ + char t_flushc; /* flush output (toggles) */ + char t_werasc; /* word erase */ + char t_lnextc; /* literal next character */ }; /* TIOCGSIZE, TIOCSSIZE not defined yet. Only needed for SunOS source diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index 0eebf3c..16338b8 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -20,16 +20,16 @@ * Linux o32 style syscalls are in the range from 4000 to 4999. */ #define __NR_Linux 4000 -#define __NR_syscall (__NR_Linux + 0) -#define __NR_exit (__NR_Linux + 1) -#define __NR_fork (__NR_Linux + 2) -#define __NR_read (__NR_Linux + 3) -#define __NR_write (__NR_Linux + 4) -#define __NR_open (__NR_Linux + 5) -#define __NR_close (__NR_Linux + 6) -#define __NR_waitpid (__NR_Linux + 7) -#define __NR_creat (__NR_Linux + 8) -#define __NR_link (__NR_Linux + 9) +#define __NR_syscall (__NR_Linux + 0) +#define __NR_exit (__NR_Linux + 1) +#define __NR_fork (__NR_Linux + 2) +#define __NR_read (__NR_Linux + 3) +#define __NR_write (__NR_Linux + 4) +#define __NR_open (__NR_Linux + 5) +#define __NR_close (__NR_Linux + 6) +#define __NR_waitpid (__NR_Linux + 7) +#define __NR_creat (__NR_Linux + 8) +#define __NR_link (__NR_Linux + 9) #define __NR_unlink (__NR_Linux + 10) #define __NR_execve (__NR_Linux + 11) #define __NR_chdir (__NR_Linux + 12) @@ -386,16 +386,16 @@ * Linux 64-bit syscalls are in the range from 5000 to 5999. */ #define __NR_Linux 5000 -#define __NR_read (__NR_Linux + 0) -#define __NR_write (__NR_Linux + 1) -#define __NR_open (__NR_Linux + 2) -#define __NR_close (__NR_Linux + 3) -#define __NR_stat (__NR_Linux + 4) -#define __NR_fstat (__NR_Linux + 5) -#define __NR_lstat (__NR_Linux + 6) -#define __NR_poll (__NR_Linux + 7) -#define __NR_lseek (__NR_Linux + 8) -#define __NR_mmap (__NR_Linux + 9) +#define __NR_read (__NR_Linux + 0) +#define __NR_write (__NR_Linux + 1) +#define __NR_open (__NR_Linux + 2) +#define __NR_close (__NR_Linux + 3) +#define __NR_stat (__NR_Linux + 4) +#define __NR_fstat (__NR_Linux + 5) +#define __NR_lstat (__NR_Linux + 6) +#define __NR_poll (__NR_Linux + 7) +#define __NR_lseek (__NR_Linux + 8) +#define __NR_mmap (__NR_Linux + 9) #define __NR_mprotect (__NR_Linux + 10) #define __NR_munmap (__NR_Linux + 11) #define __NR_brk (__NR_Linux + 12) @@ -711,16 +711,16 @@ * Linux N32 syscalls are in the range from 6000 to 6999. */ #define __NR_Linux 6000 -#define __NR_read (__NR_Linux + 0) -#define __NR_write (__NR_Linux + 1) -#define __NR_open (__NR_Linux + 2) -#define __NR_close (__NR_Linux + 3) -#define __NR_stat (__NR_Linux + 4) -#define __NR_fstat (__NR_Linux + 5) -#define __NR_lstat (__NR_Linux + 6) -#define __NR_poll (__NR_Linux + 7) -#define __NR_lseek (__NR_Linux + 8) -#define __NR_mmap (__NR_Linux + 9) +#define __NR_read (__NR_Linux + 0) +#define __NR_write (__NR_Linux + 1) +#define __NR_open (__NR_Linux + 2) +#define __NR_close (__NR_Linux + 3) +#define __NR_stat (__NR_Linux + 4) +#define __NR_fstat (__NR_Linux + 5) +#define __NR_lstat (__NR_Linux + 6) +#define __NR_poll (__NR_Linux + 7) +#define __NR_lseek (__NR_Linux + 8) +#define __NR_mmap (__NR_Linux + 9) #define __NR_mprotect (__NR_Linux + 10) #define __NR_munmap (__NR_Linux + 11) #define __NR_brk (__NR_Linux + 12) diff --git a/arch/mips/jazz/Makefile b/arch/mips/jazz/Makefile index dd9d99b..624b0ee 100644 --- a/arch/mips/jazz/Makefile +++ b/arch/mips/jazz/Makefile @@ -2,4 +2,4 @@ # Makefile for the Jazz family specific parts of the kernel # -obj-y := irq.o jazzdma.o reset.o setup.o +obj-y := irq.o jazzdma.o reset.o setup.o diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index f21868b..e1ea4f6 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -111,7 +111,7 @@ asmlinkage void plat_irq_dispatch(void) } static void r4030_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) + struct clock_event_device *evt) { /* Nothing to do ... */ } @@ -146,7 +146,7 @@ void __init plat_time_init(void) BUG_ON(HZ != 100); - cd->cpumask = cpumask_of(cpu); + cd->cpumask = cpumask_of(cpu); clockevents_register_device(cd); action->dev_id = cd; setup_irq(JAZZ_TIMER_IRQ, action); diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c index 2d8e447..db6f5af 100644 --- a/arch/mips/jazz/jazzdma.c +++ b/arch/mips/jazz/jazzdma.c @@ -63,7 +63,7 @@ static inline void vdma_pgtbl_init(void) static int __init vdma_init(void) { /* - * Allocate 32k of memory for DMA page tables. This needs to be page + * Allocate 32k of memory for DMA page tables. This needs to be page * aligned and should be uncached to avoid cache flushing after every * update. */ @@ -218,14 +218,14 @@ int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size) printk ("vdma_map: Invalid logical address: %08lx\n", laddr); - return -EINVAL; /* invalid logical address */ + return -EINVAL; /* invalid logical address */ } if (paddr > 0x1fffffff) { if (vdma_debug) printk ("vdma_map: Invalid physical address: %08lx\n", paddr); - return -EINVAL; /* invalid physical address */ + return -EINVAL; /* invalid physical address */ } pages = (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1; diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index 820e926..e4374a5 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -137,9 +137,9 @@ static struct resource jazz_esp_rsrc[] = { }; static struct platform_device jazz_esp_pdev = { - .name = "jazz_esp", - .num_resources = ARRAY_SIZE(jazz_esp_rsrc), - .resource = jazz_esp_rsrc + .name = "jazz_esp", + .num_resources = ARRAY_SIZE(jazz_esp_rsrc), + .resource = jazz_esp_rsrc }; static struct resource jazz_sonic_rsrc[] = { @@ -156,9 +156,9 @@ static struct resource jazz_sonic_rsrc[] = { }; static struct platform_device jazz_sonic_pdev = { - .name = "jazzsonic", - .num_resources = ARRAY_SIZE(jazz_sonic_rsrc), - .resource = jazz_sonic_rsrc + .name = "jazzsonic", + .num_resources = ARRAY_SIZE(jazz_sonic_rsrc), + .resource = jazz_sonic_rsrc }; static struct resource jazz_cmos_rsrc[] = { @@ -175,13 +175,13 @@ static struct resource jazz_cmos_rsrc[] = { }; static struct platform_device jazz_cmos_pdev = { - .name = "rtc_cmos", - .num_resources = ARRAY_SIZE(jazz_cmos_rsrc), - .resource = jazz_cmos_rsrc + .name = "rtc_cmos", + .num_resources = ARRAY_SIZE(jazz_cmos_rsrc), + .resource = jazz_cmos_rsrc }; static struct platform_device pcspeaker_pdev = { - .name = "pcspkr", + .name = "pcspkr", .id = -1, }; diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index 43d964d..be2b3de 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -52,7 +52,7 @@ static bool is_avt2; static struct nand_ecclayout qi_lb60_ecclayout_1gb = { .eccbytes = 36, .eccpos = { - 6, 7, 8, 9, 10, 11, 12, 13, + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, @@ -210,7 +210,7 @@ static const uint32_t qi_lb60_keymap[] = { KEY(6, 7, KEY_RIGHT), /* S57 */ KEY(7, 0, KEY_LEFTSHIFT), /* S58 */ - KEY(7, 1, KEY_LEFTALT), /* S59 */ + KEY(7, 1, KEY_LEFTALT), /* S59 */ KEY(7, 2, KEY_QI_FN), /* S60 */ }; @@ -317,7 +317,7 @@ static struct spi_board_info qi_lb60_spi_board_info[] = { /* Battery */ static struct jz_battery_platform_data qi_lb60_battery_pdata = { - .gpio_charge = JZ_GPIO_PORTC(27), + .gpio_charge = JZ_GPIO_PORTC(27), .gpio_charge_active_low = 1, .info = { .name = "battery", @@ -344,7 +344,7 @@ static struct gpio_keys_platform_data qi_lb60_gpio_keys_data = { }; static struct platform_device qi_lb60_gpio_keys = { - .name = "gpio-keys", + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &qi_lb60_gpio_keys_data, diff --git a/arch/mips/jz4740/clock-debugfs.c b/arch/mips/jz4740/clock-debugfs.c index 330a0f2..a8acdef 100644 --- a/arch/mips/jz4740/clock-debugfs.c +++ b/arch/mips/jz4740/clock-debugfs.c @@ -3,7 +3,7 @@ * JZ4740 SoC clock support debugfs entries * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c index 118a8a5..484d38a 100644 --- a/arch/mips/jz4740/clock.c +++ b/arch/mips/jz4740/clock.c @@ -3,7 +3,7 @@ * JZ4740 SoC clock support * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * @@ -31,7 +31,7 @@ #define JZ_REG_CLOCK_LOW_POWER 0x04 #define JZ_REG_CLOCK_PLL 0x10 #define JZ_REG_CLOCK_GATE 0x20 -#define JZ_REG_CLOCK_SLEEP_CTRL 0x24 +#define JZ_REG_CLOCK_SLEEP_CTRL 0x24 #define JZ_REG_CLOCK_I2S 0x60 #define JZ_REG_CLOCK_LCD 0x64 #define JZ_REG_CLOCK_MMC 0x68 diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c index d7feb89..317ec6f 100644 --- a/arch/mips/jz4740/dma.c +++ b/arch/mips/jz4740/dma.c @@ -3,7 +3,7 @@ * JZ4740 SoC DMA support * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c index e1ddb95..00b798d 100644 --- a/arch/mips/jz4740/gpio.c +++ b/arch/mips/jz4740/gpio.c @@ -3,7 +3,7 @@ * JZ4740 platform GPIO support * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/jz4740/irq.c b/arch/mips/jz4740/irq.c index fc57ded..2531da1 100644 --- a/arch/mips/jz4740/irq.c +++ b/arch/mips/jz4740/irq.c @@ -3,7 +3,7 @@ * JZ4740 platform IRQ support * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/jz4740/irq.h b/arch/mips/jz4740/irq.h index f75e39d..0f48720 100644 --- a/arch/mips/jz4740/irq.h +++ b/arch/mips/jz4740/irq.h @@ -2,7 +2,7 @@ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c index 6d14dcd..e9348fd 100644 --- a/arch/mips/jz4740/platform.c +++ b/arch/mips/jz4740/platform.c @@ -3,7 +3,7 @@ * JZ4740 platform devices * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * @@ -102,7 +102,7 @@ struct platform_device jz4740_mmc_device = { .dma_mask = &jz4740_mmc_device.dev.coherent_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), }, - .num_resources = ARRAY_SIZE(jz4740_mmc_resources), + .num_resources = ARRAY_SIZE(jz4740_mmc_resources), .resource = jz4740_mmc_resources, }; @@ -114,7 +114,7 @@ static struct resource jz4740_rtc_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = JZ4740_IRQ_RTC, + .start = JZ4740_IRQ_RTC, .end = JZ4740_IRQ_RTC, .flags = IORESOURCE_IRQ, }, @@ -144,7 +144,7 @@ static struct resource jz4740_i2c_resources[] = { struct platform_device jz4740_i2c_device = { .name = "jz4740-i2c", .id = 0, - .num_resources = ARRAY_SIZE(jz4740_i2c_resources), + .num_resources = ARRAY_SIZE(jz4740_i2c_resources), .resource = jz4740_i2c_resources, }; @@ -318,8 +318,8 @@ static struct resource jz4740_wdt_resources[] = { }; struct platform_device jz4740_wdt_device = { - .name = "jz4740-wdt", - .id = -1, + .name = "jz4740-wdt", + .id = -1, .num_resources = ARRAY_SIZE(jz4740_wdt_resources), .resource = jz4740_wdt_resources, }; diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c index 6744fa7..d8e2130 100644 --- a/arch/mips/jz4740/pm.c +++ b/arch/mips/jz4740/pm.c @@ -3,7 +3,7 @@ * JZ4740 SoC power management support * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c index 4a70407..5a93f38 100644 --- a/arch/mips/jz4740/prom.c +++ b/arch/mips/jz4740/prom.c @@ -3,7 +3,7 @@ * JZ4740 SoC prom code * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c index 6c0da5a..b6c6343 100644 --- a/arch/mips/jz4740/reset.c +++ b/arch/mips/jz4740/reset.c @@ -2,7 +2,7 @@ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c index d97cfbf..76eafcb 100644 --- a/arch/mips/jz4740/setup.c +++ b/arch/mips/jz4740/setup.c @@ -4,7 +4,7 @@ * JZ4740 setup code * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c index 39bb4bb..5e430ce 100644 --- a/arch/mips/jz4740/time.c +++ b/arch/mips/jz4740/time.c @@ -3,7 +3,7 @@ * JZ4740 platform time support * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c index 22f11d7..4992461 100644 --- a/arch/mips/jz4740/timer.c +++ b/arch/mips/jz4740/timer.c @@ -3,7 +3,7 @@ * JZ4740 platform timer support * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 007c33d..f81d98f 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o obj-$(CONFIG_CSRC_POWERTV) += csrc-powertv.o obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o +obj-$(CONFIG_CSRC_GIC) += csrc-gic.o obj-$(CONFIG_SYNC_R4K) += sync-r4k.o obj-$(CONFIG_STACKTRACE) += stacktrace.o @@ -39,7 +40,7 @@ obj-$(CONFIG_CPU_R4K_FPU) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o -obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o +obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP_UP) += smp-up.o @@ -53,7 +54,7 @@ obj-$(CONFIG_MIPS_CMP) += smp-cmp.o obj-$(CONFIG_CPU_MIPSR2) += spram.o obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o -obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o +obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o obj-$(CONFIG_I8259) += i8259.o obj-$(CONFIG_IRQ_CPU) += irq_cpu.o @@ -98,4 +99,35 @@ obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o obj-$(CONFIG_JUMP_LABEL) += jump_label.o +# +# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe +# to enable DSP assembler support here even if the MIPS Release 2 CPU we +# are targetting does not support DSP because all code-paths making use of +# it properly check that the running CPU *actually does* support these +# instructions. +# +ifeq ($(CONFIG_CPU_MIPSR2), y) +CFLAGS_DSP = -DHAVE_AS_DSP + +# +# Check if assembler supports DSP ASE +# +ifeq ($(call cc-option-yn,-mdsp), y) +CFLAGS_DSP += -mdsp +endif + +# +# Check if assembler supports DSP ASE Rev2 +# +ifeq ($(call cc-option-yn,-mdspr2), y) +CFLAGS_DSP += -mdspr2 +endif + +CFLAGS_signal.o = $(CFLAGS_DSP) +CFLAGS_signal32.o = $(CFLAGS_DSP) +CFLAGS_process.o = $(CFLAGS_DSP) +CFLAGS_branch.o = $(CFLAGS_DSP) +CFLAGS_ptrace.o = $(CFLAGS_DSP) +endif + CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c index 9fdd8bc..e06f777 100644 --- a/arch/mips/kernel/binfmt_elfn32.c +++ b/arch/mips/kernel/binfmt_elfn32.c @@ -6,7 +6,7 @@ * * Heavily inspired by the 32-bit Sparc compat code which is * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com) - * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek (jj@ultra.linux.cz) + * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek (jj@ultra.linux.cz) */ #define ELF_ARCH EM_MIPS @@ -48,7 +48,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; #define TASK32_SIZE 0x7fff8000UL #undef ELF_ET_DYN_BASE -#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2) +#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2) #include <asm/processor.h> #include <linux/module.h> @@ -67,8 +67,8 @@ struct elf_prstatus32 pid_t pr_ppid; pid_t pr_pgrp; pid_t pr_sid; - struct compat_timeval pr_utime; /* User time */ - struct compat_timeval pr_stime; /* System time */ + struct compat_timeval pr_utime; /* User time */ + struct compat_timeval pr_stime; /* System time */ struct compat_timeval pr_cutime;/* Cumulative user time */ struct compat_timeval pr_cstime;/* Cumulative system time */ elf_gregset_t pr_reg; /* GP registers */ @@ -88,7 +88,7 @@ struct elf_prpsinfo32 pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; /* Lots missing */ char pr_fname[16]; /* filename of executable */ - char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ + char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ }; #define elf_caddr_t u32 diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index ff44823..556a435 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -6,7 +6,7 @@ * * Heavily inspired by the 32-bit Sparc compat code which is * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com) - * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek (jj@ultra.linux.cz) + * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek (jj@ultra.linux.cz) */ #define ELF_ARCH EM_MIPS @@ -50,7 +50,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; #define TASK32_SIZE 0x7fff8000UL #undef ELF_ET_DYN_BASE -#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2) +#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2) #include <asm/processor.h> @@ -86,8 +86,8 @@ struct elf_prstatus32 pid_t pr_ppid; pid_t pr_pgrp; pid_t pr_sid; - struct compat_timeval pr_utime; /* User time */ - struct compat_timeval pr_stime; /* System time */ + struct compat_timeval pr_utime; /* User time */ + struct compat_timeval pr_stime; /* System time */ struct compat_timeval pr_cutime;/* Cumulative user time */ struct compat_timeval pr_cstime;/* Cumulative system time */ elf_gregset_t pr_reg; /* GP registers */ @@ -107,7 +107,7 @@ struct elf_prpsinfo32 pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; /* Lots missing */ char pr_fname[16]; /* filename of executable */ - char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ + char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ }; #define elf_caddr_t u32 diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S index e908e81..64c4fd6 100644 --- a/arch/mips/kernel/bmips_vec.S +++ b/arch/mips/kernel/bmips_vec.S @@ -170,7 +170,7 @@ bmips_smp_entry: /* switch to permanent stack and continue booting */ - .global bmips_secondary_reentry + .global bmips_secondary_reentry bmips_secondary_reentry: la k0, bmips_smp_boot_sp lw sp, 0(k0) @@ -182,7 +182,7 @@ bmips_secondary_reentry: #endif /* CONFIG_SMP */ .align 4 - .global bmips_reset_nmi_vec_end + .global bmips_reset_nmi_vec_end bmips_reset_nmi_vec_end: END(bmips_reset_nmi_vec) @@ -206,7 +206,7 @@ LEAF(bmips_smp_int_vec) eret .align 4 - .global bmips_smp_int_vec_end + .global bmips_smp_int_vec_end bmips_smp_int_vec_end: END(bmips_smp_int_vec) diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 4d735d0..83ffe95 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -57,7 +57,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, */ case bcond_op: switch (insn.i_format.rt) { - case bltz_op: + case bltz_op: case bltzl_op: if ((long)regs->regs[insn.i_format.rs] < 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); @@ -197,8 +197,8 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, bit += (bit != 0); bit += 23; switch (insn.i_format.rt & 3) { - case 0: /* bc1f */ - case 2: /* bc1fl */ + case 0: /* bc1f */ + case 2: /* bc1fl */ if (~fcr31 & (1 << bit)) { epc = epc + 4 + (insn.i_format.simmediate << 2); if (insn.i_format.rt == 2) @@ -208,8 +208,8 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, regs->cp0_epc = epc; break; - case 1: /* bc1t */ - case 3: /* bc1tl */ + case 1: /* bc1t */ + case 3: /* bc1tl */ if (fcr31 & (1 << bit)) { epc = epc + 4 + (insn.i_format.simmediate << 2); if (insn.i_format.rt == 3) diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c index 69bbfae..15f618b 100644 --- a/arch/mips/kernel/cevt-bcm1480.c +++ b/arch/mips/kernel/cevt-bcm1480.c @@ -41,7 +41,7 @@ * the rest of the system */ static void sibyte_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) + struct clock_event_device *evt) { unsigned int cpu = smp_processor_id(); void __iomem *cfg, *init; @@ -144,7 +144,7 @@ void __cpuinit sb1480_clockevent_init(void) bcm1480_unmask_irq(cpu, irq); - action->handler = sibyte_counter_handler; + action->handler = sibyte_counter_handler; action->flags = IRQF_PERCPU | IRQF_TIMER; action->name = name; action->dev_id = cd; diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c index ed648cb..ff1f01b 100644 --- a/arch/mips/kernel/cevt-ds1287.c +++ b/arch/mips/kernel/cevt-ds1287.c @@ -1,7 +1,7 @@ /* * DS1287 clockevent driver * - * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -89,7 +89,7 @@ static void ds1287_event_handler(struct clock_event_device *dev) static struct clock_event_device ds1287_clockevent = { .name = "ds1287", .features = CLOCK_EVT_FEAT_PERIODIC, - .set_next_event = ds1287_set_next_event, + .set_next_event = ds1287_set_next_event, .set_mode = ds1287_set_mode, .event_handler = ds1287_event_handler, }; diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c index 831b475..f069460 100644 --- a/arch/mips/kernel/cevt-gt641xx.c +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -1,7 +1,7 @@ /* * GT641xx clockevent routines. * - * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -98,7 +98,7 @@ static struct clock_event_device gt641xx_timer0_clockevent = { .name = "gt641xx-timer0", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .irq = GT641XX_TIMER0_IRQ, - .set_next_event = gt641xx_timer0_set_next_event, + .set_next_event = gt641xx_timer0_set_next_event, .set_mode = gt641xx_timer0_set_mode, .event_handler = gt641xx_timer0_event_handler, }; diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 7532392..07b847d 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -25,7 +25,7 @@ #ifndef CONFIG_MIPS_MT_SMTC static int mips_next_event(unsigned long delta, - struct clock_event_device *evt) + struct clock_event_device *evt) { unsigned int cnt; int res; @@ -66,7 +66,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id) goto out; /* - * The same applies to performance counter interrupts. But with the + * The same applies to performance counter interrupts. But with the * above we now know that the reason we got here must be a timer * interrupt. Being the paranoiacs we are we check anyway. */ @@ -119,7 +119,7 @@ int c0_compare_int_usable(void) unsigned int cnt; /* - * IP7 already pending? Try to clear it by acking the timer. + * IP7 already pending? Try to clear it by acking the timer. */ if (c0_compare_int_pending()) { cnt = read_c0_count(); diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c index e73439f..200f277 100644 --- a/arch/mips/kernel/cevt-sb1250.c +++ b/arch/mips/kernel/cevt-sb1250.c @@ -39,7 +39,7 @@ * the rest of the system */ static void sibyte_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) + struct clock_event_device *evt) { unsigned int cpu = smp_processor_id(); void __iomem *cfg, *init; @@ -143,7 +143,7 @@ void __cpuinit sb1250_clockevent_init(void) sb1250_unmask_irq(cpu, irq); - action->handler = sibyte_counter_handler; + action->handler = sibyte_counter_handler; action->flags = IRQF_PERCPU | IRQF_TIMER; action->name = name; action->dev_id = cd; diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c index 2e72d30..9de5ed7 100644 --- a/arch/mips/kernel/cevt-smtc.c +++ b/arch/mips/kernel/cevt-smtc.c @@ -49,7 +49,7 @@ static int smtc_nextinvpe[NR_CPUS]; /* * Timestamps stored are absolute values to be programmed - * into Count register. Valid timestamps will never be zero. + * into Count register. Valid timestamps will never be zero. * If a Zero Count value is actually calculated, it is converted * to be a 1, which will introduce 1 or two CPU cycles of error * roughly once every four billion events, which at 1000 HZ means diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index e5c30b1..2ae0846 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -4,7 +4,7 @@ * for more details. * * Based on linux/arch/mips/kernel/cevt-r4k.c, - * linux/arch/mips/jmr3927/rbhma3100/setup.c + * linux/arch/mips/jmr3927/rbhma3100/setup.c * * Copyright 2001 MontaVista Software Inc. * Copyright (C) 2000-2001 Toshiba Corporation @@ -129,7 +129,7 @@ static struct txx9_clock_event_device txx9_clock_event_device = { CLOCK_EVT_FEAT_ONESHOT, .rating = 200, .set_mode = txx9tmr_set_mode, - .set_next_event = txx9tmr_set_next_event, + .set_next_event = txx9tmr_set_next_event, }, }; @@ -139,7 +139,7 @@ static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id) struct clock_event_device *cd = &txx9_cd->cd; struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr; - __raw_writel(0, &tmrptr->tisr); /* ack interrupt */ + __raw_writel(0, &tmrptr->tisr); /* ack interrupt */ cd->event_handler(cd); return IRQ_HANDLED; } diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index d6a1864..de3c25f 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -84,9 +84,9 @@ static inline void mult_sh_align_mod(long *v1, long *v2, long *w, ".set noreorder\n\t" ".set nomacro\n\t" "mult %2, %3\n\t" - "dsll32 %0, %4, %5\n\t" + "dsll32 %0, %4, %5\n\t" "mflo $0\n\t" - "dsll32 %1, %4, %5\n\t" + "dsll32 %1, %4, %5\n\t" "nop\n\t" ".set pop" : "=&r" (lv1), "=r" (lw) @@ -239,7 +239,7 @@ static inline void check_daddi(void) panic(bug64hit, !DADDI_WAR ? daddiwar : nowar); } -int daddiu_bug = -1; +int daddiu_bug = -1; static inline void check_daddiu(void) { @@ -273,7 +273,7 @@ static inline void check_daddiu(void) #ifdef HAVE_AS_SET_DADDI ".set daddi\n\t" #endif - "daddiu %0, %2, %4\n\t" + "daddiu %0, %2, %4\n\t" "addiu %1, $0, %4\n\t" "daddu %1, %2\n\t" ".set pop" @@ -292,7 +292,7 @@ static inline void check_daddiu(void) asm volatile( "addiu %2, $0, %3\n\t" "dsrl %2, %2, 1\n\t" - "daddiu %0, %2, %4\n\t" + "daddiu %0, %2, %4\n\t" "addiu %1, $0, %4\n\t" "daddu %1, %2" : "=&r" (v), "=&r" (w), "=&r" (tmp) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index cce3782..6bfccc2 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -4,7 +4,7 @@ * Copyright (C) xxxx the Anonymous * Copyright (C) 1994 - 2006 Ralf Baechle * Copyright (C) 2003, 2004 Maciej W. Rozycki - * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. + * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -69,12 +69,12 @@ void r4k_wait_irqoff(void) " wait \n" " .set pop \n"); local_irq_enable(); - __asm__(" .globl __pastwait \n" + __asm__(" .globl __pastwait \n" "__pastwait: \n"); } /* - * The RM7000 variant has to handle erratum 38. The workaround is to not + * The RM7000 variant has to handle erratum 38. The workaround is to not * have any pending stores when the WAIT instruction is executed. */ static void rm7k_wait_irqoff(void) @@ -201,6 +201,7 @@ void __init check_wait(void) break; case CPU_M14KC: + case CPU_M14KEC: case CPU_24K: case CPU_34K: case CPU_1004K: @@ -331,6 +332,34 @@ static inline void cpu_probe_vmbits(struct cpuinfo_mips *c) #endif } +static void __cpuinit set_isa(struct cpuinfo_mips *c, unsigned int isa) +{ + switch (isa) { + case MIPS_CPU_ISA_M64R2: + c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2; + case MIPS_CPU_ISA_M64R1: + c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1; + case MIPS_CPU_ISA_V: + c->isa_level |= MIPS_CPU_ISA_V; + case MIPS_CPU_ISA_IV: + c->isa_level |= MIPS_CPU_ISA_IV; + case MIPS_CPU_ISA_III: + c->isa_level |= MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | + MIPS_CPU_ISA_III; + break; + + case MIPS_CPU_ISA_M32R2: + c->isa_level |= MIPS_CPU_ISA_M32R2; + case MIPS_CPU_ISA_M32R1: + c->isa_level |= MIPS_CPU_ISA_M32R1; + case MIPS_CPU_ISA_II: + c->isa_level |= MIPS_CPU_ISA_II; + case MIPS_CPU_ISA_I: + c->isa_level |= MIPS_CPU_ISA_I; + break; + } +} + static char unknown_isa[] __cpuinitdata = KERN_ERR \ "Unsupported ISA type, c0.config0: %d."; @@ -348,10 +377,10 @@ static inline unsigned int decode_config0(struct cpuinfo_mips *c) case 0: switch ((config0 & MIPS_CONF_AR) >> 10) { case 0: - c->isa_level = MIPS_CPU_ISA_M32R1; + set_isa(c, MIPS_CPU_ISA_M32R1); break; case 1: - c->isa_level = MIPS_CPU_ISA_M32R2; + set_isa(c, MIPS_CPU_ISA_M32R2); break; default: goto unknown; @@ -360,10 +389,10 @@ static inline unsigned int decode_config0(struct cpuinfo_mips *c) case 2: switch ((config0 & MIPS_CONF_AR) >> 10) { case 0: - c->isa_level = MIPS_CPU_ISA_M64R1; + set_isa(c, MIPS_CPU_ISA_M64R1); break; case 1: - c->isa_level = MIPS_CPU_ISA_M64R2; + set_isa(c, MIPS_CPU_ISA_M64R2); break; default: goto unknown; @@ -439,6 +468,10 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c) c->ases |= MIPS_ASE_MIPSMT; if (config3 & MIPS_CONF3_ULRI) c->options |= MIPS_CPU_ULRI; + if (config3 & MIPS_CONF3_ISA) + c->options |= MIPS_CPU_MICROMIPS; + if (config3 & MIPS_CONF3_VZ) + c->ases |= MIPS_ASE_VZ; return config3 & MIPS_CONF_M; } @@ -469,7 +502,7 @@ static void __cpuinit decode_configs(struct cpuinfo_mips *c) c->scache.flags = MIPS_CACHE_NOT_PRESENT; ok = decode_config0(c); /* Read Config registers. */ - BUG_ON(!ok); /* Arch spec violation! */ + BUG_ON(!ok); /* Arch spec violation! */ if (ok) ok = decode_config1(c); if (ok) @@ -494,7 +527,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R2000: c->cputype = CPU_R2000; __cpu_name[cpu] = "R2000"; - c->isa_level = MIPS_CPU_ISA_I; + set_isa(c, MIPS_CPU_ISA_I); c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | MIPS_CPU_NOFPUEX; if (__cpu_has_fpu()) @@ -514,7 +547,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_R3000; __cpu_name[cpu] = "R3000"; } - c->isa_level = MIPS_CPU_ISA_I; + set_isa(c, MIPS_CPU_ISA_I); c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | MIPS_CPU_NOFPUEX; if (__cpu_has_fpu()) @@ -540,7 +573,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) } } - c->isa_level = MIPS_CPU_ISA_III; + set_isa(c, MIPS_CPU_ISA_III); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_WATCH | MIPS_CPU_VCE | MIPS_CPU_LLSC; @@ -580,14 +613,14 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "NEC Vr41xx"; break; } - c->isa_level = MIPS_CPU_ISA_III; + set_isa(c, MIPS_CPU_ISA_III); c->options = R4K_OPTS; c->tlbsize = 32; break; case PRID_IMP_R4300: c->cputype = CPU_R4300; __cpu_name[cpu] = "R4300"; - c->isa_level = MIPS_CPU_ISA_III; + set_isa(c, MIPS_CPU_ISA_III); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; c->tlbsize = 32; @@ -595,7 +628,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R4600: c->cputype = CPU_R4600; __cpu_name[cpu] = "R4600"; - c->isa_level = MIPS_CPU_ISA_III; + set_isa(c, MIPS_CPU_ISA_III); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; c->tlbsize = 48; @@ -610,13 +643,13 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) */ c->cputype = CPU_R4650; __cpu_name[cpu] = "R4650"; - c->isa_level = MIPS_CPU_ISA_III; + set_isa(c, MIPS_CPU_ISA_III); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC; c->tlbsize = 48; break; #endif case PRID_IMP_TX39: - c->isa_level = MIPS_CPU_ISA_I; + set_isa(c, MIPS_CPU_ISA_I); c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE; if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) { @@ -641,7 +674,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R4700: c->cputype = CPU_R4700; __cpu_name[cpu] = "R4700"; - c->isa_level = MIPS_CPU_ISA_III; + set_isa(c, MIPS_CPU_ISA_III); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; c->tlbsize = 48; @@ -649,7 +682,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_TX49: c->cputype = CPU_TX49XX; __cpu_name[cpu] = "R49XX"; - c->isa_level = MIPS_CPU_ISA_III; + set_isa(c, MIPS_CPU_ISA_III); c->options = R4K_OPTS | MIPS_CPU_LLSC; if (!(c->processor_id & 0x08)) c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR; @@ -658,7 +691,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R5000: c->cputype = CPU_R5000; __cpu_name[cpu] = "R5000"; - c->isa_level = MIPS_CPU_ISA_IV; + set_isa(c, MIPS_CPU_ISA_IV); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; c->tlbsize = 48; @@ -666,7 +699,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R5432: c->cputype = CPU_R5432; __cpu_name[cpu] = "R5432"; - c->isa_level = MIPS_CPU_ISA_IV; + set_isa(c, MIPS_CPU_ISA_IV); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_WATCH | MIPS_CPU_LLSC; c->tlbsize = 48; @@ -674,7 +707,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R5500: c->cputype = CPU_R5500; __cpu_name[cpu] = "R5500"; - c->isa_level = MIPS_CPU_ISA_IV; + set_isa(c, MIPS_CPU_ISA_IV); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_WATCH | MIPS_CPU_LLSC; c->tlbsize = 48; @@ -682,7 +715,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_NEVADA: c->cputype = CPU_NEVADA; __cpu_name[cpu] = "Nevada"; - c->isa_level = MIPS_CPU_ISA_IV; + set_isa(c, MIPS_CPU_ISA_IV); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_DIVEC | MIPS_CPU_LLSC; c->tlbsize = 48; @@ -690,7 +723,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R6000: c->cputype = CPU_R6000; __cpu_name[cpu] = "R6000"; - c->isa_level = MIPS_CPU_ISA_II; + set_isa(c, MIPS_CPU_ISA_II); c->options = MIPS_CPU_TLB | MIPS_CPU_FPU | MIPS_CPU_LLSC; c->tlbsize = 32; @@ -698,7 +731,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R6000A: c->cputype = CPU_R6000A; __cpu_name[cpu] = "R6000A"; - c->isa_level = MIPS_CPU_ISA_II; + set_isa(c, MIPS_CPU_ISA_II); c->options = MIPS_CPU_TLB | MIPS_CPU_FPU | MIPS_CPU_LLSC; c->tlbsize = 32; @@ -706,38 +739,38 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_RM7000: c->cputype = CPU_RM7000; __cpu_name[cpu] = "RM7000"; - c->isa_level = MIPS_CPU_ISA_IV; + set_isa(c, MIPS_CPU_ISA_IV); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; /* - * Undocumented RM7000: Bit 29 in the info register of + * Undocumented RM7000: Bit 29 in the info register of * the RM7000 v2.0 indicates if the TLB has 48 or 64 * entries. * - * 29 1 => 64 entry JTLB - * 0 => 48 entry JTLB + * 29 1 => 64 entry JTLB + * 0 => 48 entry JTLB */ c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48; break; case PRID_IMP_RM9000: c->cputype = CPU_RM9000; __cpu_name[cpu] = "RM9000"; - c->isa_level = MIPS_CPU_ISA_IV; + set_isa(c, MIPS_CPU_ISA_IV); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; /* * Bit 29 in the info register of the RM9000 * indicates if the TLB has 48 or 64 entries. * - * 29 1 => 64 entry JTLB - * 0 => 48 entry JTLB + * 29 1 => 64 entry JTLB + * 0 => 48 entry JTLB */ c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48; break; case PRID_IMP_R8000: c->cputype = CPU_R8000; __cpu_name[cpu] = "RM8000"; - c->isa_level = MIPS_CPU_ISA_IV; + set_isa(c, MIPS_CPU_ISA_IV); c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_LLSC; @@ -746,7 +779,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R10000: c->cputype = CPU_R10000; __cpu_name[cpu] = "R10000"; - c->isa_level = MIPS_CPU_ISA_IV; + set_isa(c, MIPS_CPU_ISA_IV); c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_COUNTER | MIPS_CPU_WATCH | @@ -756,7 +789,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R12000: c->cputype = CPU_R12000; __cpu_name[cpu] = "R12000"; - c->isa_level = MIPS_CPU_ISA_IV; + set_isa(c, MIPS_CPU_ISA_IV); c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_COUNTER | MIPS_CPU_WATCH | @@ -766,7 +799,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_R14000: c->cputype = CPU_R14000; __cpu_name[cpu] = "R14000"; - c->isa_level = MIPS_CPU_ISA_IV; + set_isa(c, MIPS_CPU_ISA_IV); c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | MIPS_CPU_FPU | MIPS_CPU_32FPR | MIPS_CPU_COUNTER | MIPS_CPU_WATCH | @@ -786,7 +819,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) break; } - c->isa_level = MIPS_CPU_ISA_III; + set_isa(c, MIPS_CPU_ISA_III); c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC | MIPS_CPU_32FPR; @@ -838,10 +871,13 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "MIPS 20Kc"; break; case PRID_IMP_24K: - case PRID_IMP_24KE: c->cputype = CPU_24K; __cpu_name[cpu] = "MIPS 24Kc"; break; + case PRID_IMP_24KE: + c->cputype = CPU_24K; + __cpu_name[cpu] = "MIPS 24KEc"; + break; case PRID_IMP_25KF: c->cputype = CPU_25KF; __cpu_name[cpu] = "MIPS 25Kc"; @@ -858,6 +894,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_M14KC; __cpu_name[cpu] = "MIPS M14Kc"; break; + case PRID_IMP_M14KEC: + c->cputype = CPU_M14KEC; + __cpu_name[cpu] = "MIPS M14KEc"; + break; case PRID_IMP_1004K: c->cputype = CPU_1004K; __cpu_name[cpu] = "MIPS 1004Kc"; @@ -946,7 +986,7 @@ static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_PR4450: c->cputype = CPU_PR4450; __cpu_name[cpu] = "Philips PR4450"; - c->isa_level = MIPS_CPU_ISA_M32R1; + set_isa(c, MIPS_CPU_ISA_M32R1); break; } } @@ -1053,12 +1093,12 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) return; } - c->options = (MIPS_CPU_TLB | - MIPS_CPU_4KEX | + c->options = (MIPS_CPU_TLB | + MIPS_CPU_4KEX | MIPS_CPU_COUNTER | - MIPS_CPU_DIVEC | - MIPS_CPU_WATCH | - MIPS_CPU_EJTAG | + MIPS_CPU_DIVEC | + MIPS_CPU_WATCH | + MIPS_CPU_EJTAG | MIPS_CPU_LLSC); switch (c->processor_id & 0xff00) { @@ -1105,12 +1145,12 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) } if (c->cputype == CPU_XLP) { - c->isa_level = MIPS_CPU_ISA_M64R2; + set_isa(c, MIPS_CPU_ISA_M64R2); c->options |= (MIPS_CPU_FPU | MIPS_CPU_ULRI | MIPS_CPU_MCHECK); /* This will be updated again after all threads are woken up */ c->tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; } else { - c->isa_level = MIPS_CPU_ISA_M64R1; + set_isa(c, MIPS_CPU_ISA_M64R1); c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1; } } @@ -1129,7 +1169,7 @@ __cpuinit void cpu_probe(void) struct cpuinfo_mips *c = ¤t_cpu_data; unsigned int cpu = smp_processor_id(); - c->processor_id = PRID_IMP_UNKNOWN; + c->processor_id = PRID_IMP_UNKNOWN; c->fpu_id = FPIR_IMP_NONE; c->cputype = CPU_UNKNOWN; diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c index e7c98e2..3237c52 100644 --- a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c +++ b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c @@ -107,6 +107,8 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy, static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) { int i; + unsigned long rate; + int ret; if (!cpu_online(policy->cpu)) return -ENODEV; @@ -117,15 +119,22 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) return PTR_ERR(cpuclk); } - cpuclk->rate = cpu_clock_freq / 1000; - if (!cpuclk->rate) + rate = cpu_clock_freq / 1000; + if (!rate) { + clk_put(cpuclk); return -EINVAL; + } + ret = clk_set_rate(cpuclk, rate); + if (ret) { + clk_put(cpuclk); + return ret; + } /* clock table init */ for (i = 2; (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) - loongson2_clockmod_table[i].frequency = (cpuclk->rate * i) / 8; + loongson2_clockmod_table[i].frequency = (rate * i) / 8; policy->cur = loongson2_cpufreq_get(policy->cpu); @@ -195,8 +204,8 @@ static void loongson2_cpu_wait(void) spin_lock_irqsave(&loongson2_wait_lock, flags); cpu_freq = LOONGSON_CHIPCFG0; - LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */ - LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */ + LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */ + LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */ spin_unlock_irqrestore(&loongson2_wait_lock, flags); } diff --git a/arch/mips/kernel/crash.c b/arch/mips/kernel/crash.c index 0f53c39..93aa302 100644 --- a/arch/mips/kernel/crash.c +++ b/arch/mips/kernel/crash.c @@ -59,7 +59,7 @@ static void crash_kexec_prepare_cpus(void) #else /* !defined(CONFIG_SMP) */ static void crash_kexec_prepare_cpus(void) {} -#endif /* !defined(CONFIG_SMP) */ +#endif /* !defined(CONFIG_SMP) */ void default_machine_crash_shutdown(struct pt_regs *regs) { diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c index f96f99c..468f3eb 100644 --- a/arch/mips/kernel/csrc-bcm1480.c +++ b/arch/mips/kernel/csrc-bcm1480.c @@ -35,7 +35,7 @@ static cycle_t bcm1480_hpt_read(struct clocksource *cs) struct clocksource bcm1480_clocksource = { .name = "zbbus-cycles", - .rating = 200, + .rating = 200, .read = bcm1480_hpt_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, diff --git a/arch/mips/kernel/csrc-gic.c b/arch/mips/kernel/csrc-gic.c new file mode 100644 index 0000000..5dca24b --- /dev/null +++ b/arch/mips/kernel/csrc-gic.c @@ -0,0 +1,49 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. + */ +#include <linux/clocksource.h> +#include <linux/init.h> + +#include <asm/time.h> +#include <asm/gic.h> + +static cycle_t gic_hpt_read(struct clocksource *cs) +{ + unsigned int hi, hi2, lo; + + do { + GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_63_32), hi); + GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), lo); + GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_63_32), hi2); + } while (hi2 != hi); + + return (((cycle_t) hi) << 32) + lo; +} + +static struct clocksource gic_clocksource = { + .name = "GIC", + .read = gic_hpt_read, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +void __init gic_clocksource_init(unsigned int frequency) +{ + unsigned int config, bits; + + /* Calculate the clocksource mask. */ + GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), config); + bits = 32 + ((config & GIC_SH_CONFIG_COUNTBITS_MSK) >> + (GIC_SH_CONFIG_COUNTBITS_SHF - 2)); + + /* Set clocksource mask. */ + gic_clocksource.mask = CLOCKSOURCE_MASK(bits); + + /* Calculate a somewhat reasonable rating value. */ + gic_clocksource.rating = 200 + frequency / 10000000; + + clocksource_register_hz(&gic_clocksource, frequency); +} diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c index 46bd7fa..0654bff 100644 --- a/arch/mips/kernel/csrc-ioasic.c +++ b/arch/mips/kernel/csrc-ioasic.c @@ -1,7 +1,7 @@ /* * DEC I/O ASIC's counter clocksource * - * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c index 2e7c523..abd99ea 100644 --- a/arch/mips/kernel/csrc-powertv.c +++ b/arch/mips/kernel/csrc-powertv.c @@ -45,7 +45,7 @@ unsigned int __init mips_get_pll_freq(void) m = PLL_GET_M(pll_reg); n = PLL_GET_N(pll_reg); p = PLL_GET_P(pll_reg); - pr_info("MIPS PLL Register:0x%x M=%d N=%d P=%d\n", pll_reg, m, n, p); + pr_info("MIPS PLL Register:0x%x M=%d N=%d P=%d\n", pll_reg, m, n, p); /* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */ fout = ((2 * n * fin) / (m * (0x01 << p))); @@ -83,8 +83,8 @@ static void __init powertv_c0_hpt_clocksource_init(void) /** * struct tim_c - free running counter - * @hi: High 16 bits of the counter - * @lo: Low 32 bits of the counter + * @hi: High 16 bits of the counter + * @lo: Low 32 bits of the counter * * Lays out the structure of the free running counter in memory. This counter * increments at a rate of 27 MHz/8 on all platforms. diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c index e9606d9..6ecb77d 100644 --- a/arch/mips/kernel/csrc-sb1250.c +++ b/arch/mips/kernel/csrc-sb1250.c @@ -44,7 +44,7 @@ static cycle_t sb1250_hpt_read(struct clocksource *cs) struct clocksource bcm1250_clocksource = { .name = "bcm1250-counter-3", - .rating = 200, + .rating = 200, .read = sb1250_hpt_read, .mask = CLOCKSOURCE_MASK(23), .flags = CLOCK_SOURCE_IS_CONTINUOUS, diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c index 9ae813e..9e6440e 100644 --- a/arch/mips/kernel/early_printk.c +++ b/arch/mips/kernel/early_printk.c @@ -14,8 +14,7 @@ extern void prom_putchar(char); -static void __init -early_console_write(struct console *con, const char *s, unsigned n) +static void early_console_write(struct console *con, const char *s, unsigned n) { while (n-- && *s) { if (*s == '\n') @@ -25,7 +24,7 @@ early_console_write(struct console *con, const char *s, unsigned n) } } -static struct console early_console __initdata = { +static struct console early_console = { .name = "early", .write = early_console_write, .flags = CON_PRINTBUFFER | CON_BOOT, diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index 83fa146..cf5509f 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -125,21 +125,21 @@ static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1, * * 2.1 For KBUILD_MCOUNT_RA_ADDRESS and CONFIG_32BIT * - * lui v1, hi_16bit_of_mcount --> b 1f (0x10000005) + * lui v1, hi_16bit_of_mcount --> b 1f (0x10000005) * addiu v1, v1, low_16bit_of_mcount * move at, ra * move $12, ra_address * jalr v1 * sub sp, sp, 8 - * 1: offset = 5 instructions + * 1: offset = 5 instructions * 2.2 For the Other situations * - * lui v1, hi_16bit_of_mcount --> b 1f (0x10000004) + * lui v1, hi_16bit_of_mcount --> b 1f (0x10000004) * addiu v1, v1, low_16bit_of_mcount * move at, ra * jalr v1 * nop | move $12, ra_address | sub sp, sp, 8 - * 1: offset = 4 instructions + * 1: offset = 4 instructions */ #define INSN_B_1F (0x10000000 | MCOUNT_OFFSET_INSNS) @@ -228,8 +228,8 @@ int ftrace_disable_ftrace_graph_caller(void) #ifndef KBUILD_MCOUNT_RA_ADDRESS -#define S_RA_SP (0xafbf << 16) /* s{d,w} ra, offset(sp) */ -#define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */ +#define S_RA_SP (0xafbf << 16) /* s{d,w} ra, offset(sp) */ +#define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */ #define OFFSET_MASK 0xffff /* stack offset range: 0 ~ PT_SIZE */ unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 8a0096d..ecb347c 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -160,7 +160,7 @@ LEAF(r4k_wait) .set pop .endm - .align 5 + .align 5 BUILD_ROLLBACK_PROLOGUE handle_int NESTED(handle_int, PT_SIZE, sp) #ifdef CONFIG_TRACE_IRQFLAGS @@ -362,7 +362,7 @@ NESTED(nmi_handler, PT_SIZE, sp) .set push .set noat SAVE_ALL - move a0, sp + move a0, sp jal nmi_exception_handler RESTORE_ALL .set mips3 @@ -409,7 +409,7 @@ NESTED(nmi_handler, PT_SIZE, sp) string escapes and emits bogus warnings if it believes to recognize an unknown escape code. So make the arguments start with an n and gas will believe \n is ok ... */ - .macro __BUILD_verbose nexception + .macro __BUILD_verbose nexception LONG_L a1, PT_EPC(sp) #ifdef CONFIG_32BIT PRINT("Got \nexception at %08lx\012") @@ -442,7 +442,7 @@ NESTED(nmi_handler, PT_SIZE, sp) .endm .macro BUILD_HANDLER exception handler clear verbose - __BUILD_HANDLER \exception \handler \clear \verbose _int + __BUILD_HANDLER \exception \handler \clear \verbose _int .endm BUILD_HANDLER adel ade ade silent /* #4 */ @@ -456,7 +456,7 @@ NESTED(nmi_handler, PT_SIZE, sp) BUILD_HANDLER tr tr sti silent /* #13 */ BUILD_HANDLER fpe fpe fpe silent /* #15 */ BUILD_HANDLER mdmx mdmx sti silent /* #22 */ -#ifdef CONFIG_HARDWARE_WATCHPOINTS +#ifdef CONFIG_HARDWARE_WATCHPOINTS /* * For watch, interrupts will be enabled after the watch * registers are read. @@ -482,8 +482,8 @@ NESTED(nmi_handler, PT_SIZE, sp) MFC0 k1, CP0_ENTRYHI andi k1, 0xff /* ASID_MASK */ MFC0 k0, CP0_EPC - PTR_SRL k0, _PAGE_SHIFT + 1 - PTR_SLL k0, _PAGE_SHIFT + 1 + PTR_SRL k0, _PAGE_SHIFT + 1 + PTR_SLL k0, _PAGE_SHIFT + 1 or k1, k0 MTC0 k1, CP0_ENTRYHI mtc0_tlbw_hazard diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index fcf9731..c61cdae 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -133,7 +133,7 @@ EXPORT(_stext) #ifdef CONFIG_BOOT_RAW /* * Give us a fighting chance of running if execution beings at the - * kernel load address. This is needed because this platform does + * kernel load address. This is needed because this platform does * not have a ELF loader yet. */ FEXPORT(__kernel_entry) @@ -201,7 +201,7 @@ NESTED(kernel_entry, 16, sp) # kernel entry point #ifdef CONFIG_SMP /* - * SMP slave cpus entry point. Board specific code for bootstrap calls this + * SMP slave cpus entry point. Board specific code for bootstrap calls this * function after setting up the stack and gp registers. */ NESTED(smp_bootstrap, 16, sp) diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 32b397b..2b91fe8 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -178,7 +178,7 @@ handle_real_irq: } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } smtc_im_ack_irq(irq); raw_spin_unlock_irqrestore(&i8259A_lock, flags); diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c index 883fc6c..44a1f79 100644 --- a/arch/mips/kernel/irq-gt641xx.c +++ b/arch/mips/kernel/irq-gt641xx.c @@ -1,7 +1,7 @@ /* * GT641xx IRQ routines. * - * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,7 +25,7 @@ #include <asm/gt64120.h> -#define GT641XX_IRQ_TO_BIT(irq) (1U << (irq - GT641XX_IRQ_BASE)) +#define GT641XX_IRQ_TO_BIT(irq) (1U << (irq - GT641XX_IRQ_BASE)) static DEFINE_RAW_SPINLOCK(gt641xx_irq_lock); diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c index 14ac52c..fab40f7 100644 --- a/arch/mips/kernel/irq-msc01.c +++ b/arch/mips/kernel/irq-msc01.c @@ -1,6 +1,6 @@ /* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * @@ -86,7 +86,7 @@ static void edge_mask_and_ack_msc_irq(struct irq_data *d) */ void ll_msc_irq(void) { - unsigned int irq; + unsigned int irq; /* read the interrupt vector register */ MSCIC_READ(MSC01_IC_VEC, irq); diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c index b0662cf..26f4e4c 100644 --- a/arch/mips/kernel/irq-rm7000.c +++ b/arch/mips/kernel/irq-rm7000.c @@ -1,8 +1,8 @@ /* * Copyright (C) 2003 Ralf Baechle * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index a5aa43d..d1fea7a 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -48,7 +48,7 @@ again: } /* - * Allocate the 16 legacy interrupts for i8259 devices. This happens early + * Allocate the 16 legacy interrupts for i8259 devices. This happens early * in the kernel initialization so treating allocation failure as BUG() is * ok. */ diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index 972263b..72ef2d2 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -3,13 +3,13 @@ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net * * Copyright (C) 2001 Ralf Baechle - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. - * Author: Maciej W. Rozycki <macro@mips.com> + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki <macro@mips.com> * * This file define the irq handler for MIPS CPU interrupts. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -31,6 +31,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> @@ -113,3 +114,44 @@ void __init mips_cpu_irq_init(void) irq_set_chip_and_handler(i, &mips_cpu_irq_controller, handle_percpu_irq); } + +#ifdef CONFIG_IRQ_DOMAIN +static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + static struct irq_chip *chip; + + if (hw < 2 && cpu_has_mipsmt) { + /* Software interrupts are used for MT/CMT IPI */ + chip = &mips_mt_cpu_irq_controller; + } else { + chip = &mips_cpu_irq_controller; + } + + irq_set_chip_and_handler(irq, chip, handle_percpu_irq); + + return 0; +} + +static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = { + .map = mips_cpu_intc_map, + .xlate = irq_domain_xlate_onecell, +}; + +int __init mips_cpu_intc_init(struct device_node *of_node, + struct device_node *parent) +{ + struct irq_domain *domain; + + /* Mask interrupts. */ + clear_c0_status(ST0_IM); + clear_c0_cause(CAUSEF_IP); + + domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0, + &mips_cpu_intc_irq_domain_ops, NULL); + if (!domain) + panic("Failed to add irqdomain for MIPS CPU\n"); + + return 0; +} +#endif /* CONFIG_IRQ_DOMAIN */ diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c index b0c55b5..ab00e49 100644 --- a/arch/mips/kernel/irq_txx9.c +++ b/arch/mips/kernel/irq_txx9.c @@ -1,12 +1,12 @@ /* * Based on linux/arch/mips/jmr3927/rbhma3100/irq.c, - * linux/arch/mips/tx4927/common/tx4927_irq.c, - * linux/arch/mips/tx4938/common/irq.c + * linux/arch/mips/tx4927/common/tx4927_irq.c, + * linux/arch/mips/tx4938/common/irq.c * * Copyright 2001, 2003-2005 MontaVista Software Inc. * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * source@mvista.com + * ahennessy@mvista.com + * source@mvista.com * Copyright (C) 2000-2001 Toshiba Corporation * * This file is subject to the terms and conditions of the GNU General Public @@ -122,7 +122,7 @@ static int txx9_irq_set_type(struct irq_data *d, unsigned int flow_type) switch (flow_type & IRQF_TRIGGER_MASK) { case IRQF_TRIGGER_RISING: mode = TXx9_IRCR_UP; break; case IRQF_TRIGGER_FALLING: mode = TXx9_IRCR_DOWN; break; - case IRQF_TRIGGER_HIGH: mode = TXx9_IRCR_HIGH; break; + case IRQF_TRIGGER_HIGH: mode = TXx9_IRCR_HIGH; break; case IRQF_TRIGGER_LOW: mode = TXx9_IRCR_LOW; break; default: return -EINVAL; diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 23817a6..fcaac2f 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -40,7 +40,7 @@ static struct hard_trap_info { { 6, SIGBUS }, /* instruction bus error */ { 7, SIGBUS }, /* data bus error */ { 9, SIGTRAP }, /* break */ -/* { 11, SIGILL }, */ /* CPU unusable */ +/* { 11, SIGILL }, */ /* CPU unusable */ { 12, SIGFPE }, /* overflow */ { 13, SIGTRAP }, /* trap */ { 14, SIGSEGV }, /* virtual instruction cache coherency */ @@ -321,7 +321,7 @@ int kgdb_ll_trap(int cmd, const char *str, .regs = regs, .str = str, .err = err, - .trapnr = trap, + .trapnr = trap, .signr = sig, }; @@ -371,7 +371,7 @@ int kgdb_arch_init(void) union mips_instruction insn = { .r_format = { .opcode = spec_op, - .func = break_op, + .func = break_op, } }; memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE); diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c index ce3f080..12bc4eb 100644 --- a/arch/mips/kernel/kprobes.c +++ b/arch/mips/kernel/kprobes.c @@ -307,7 +307,7 @@ static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs, /* * Called after single-stepping. p->addr is the address of the * instruction whose first byte has been replaced by the "break 0" - * instruction. To avoid the SMP problems that can occur when we + * instruction. To avoid the SMP problems that can occur when we * temporarily put back the original opcode to single-step, we * single-stepped a copy of the instruction. The address of this * copy is p->ainsn.insn. @@ -535,7 +535,7 @@ void jprobe_return_end(void); void __kprobes jprobe_return(void) { - /* Assembler quirk necessitates this '0,code' business. */ + /* Assembler quirk necessitates this '0,code' business. */ asm volatile( "break 0,%0\n\t" ".globl jprobe_return_end\n" @@ -614,9 +614,9 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, * We can handle this because: * - instances are always inserted at the head of the list * - when multiple return probes are registered for the same - * function, the first instance's ret_addr will point to the - * real return address, and all the rest will point to - * kretprobe_trampoline + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline */ hlist_for_each_entry_safe(ri, tmp, head, hlist) { if (ri->task != current) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 253bd8a..8eeee1c 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -76,7 +76,7 @@ out: return error; } -#define RLIM_INFINITY32 0x7fffffff +#define RLIM_INFINITY32 0x7fffffff #define RESOURCE32(x) ((x > RLIM_INFINITY32) ? RLIM_INFINITY32 : x) struct rlimit32 { @@ -105,7 +105,7 @@ SYSCALL_DEFINE5(32_llseek, unsigned int, fd, unsigned int, offset_high, /* From the Single Unix Spec: pread & pwrite act like lseek to pos + op + lseek back to original location. They fail just like lseek does on - non-seekable files. */ + non-seekable files. */ SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count, unsigned long, unused, unsigned long, a4, unsigned long, a5) @@ -247,7 +247,7 @@ SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd, } asmlinkage ssize_t sys32_readahead(int fd, u32 pad0, u64 a2, u64 a3, - size_t count) + size_t count) { return sys_readahead(fd, merge_64(a2, a3), count); } @@ -276,7 +276,7 @@ asmlinkage long sys32_fallocate(int fd, int mode, unsigned offset_a2, unsigned offset_a3, unsigned len_a4, unsigned len_a5) { return sys_fallocate(fd, mode, merge_64(offset_a2, offset_a3), - merge_64(len_a4, len_a5)); + merge_64(len_a4, len_a5)); } asmlinkage long sys32_lookup_dcookie(u32 a0, u32 a1, char __user *buf, @@ -286,7 +286,7 @@ asmlinkage long sys32_lookup_dcookie(u32 a0, u32 a1, char __user *buf, } SYSCALL_DEFINE6(32_fanotify_mark, int, fanotify_fd, unsigned int, flags, - u64, a3, u64, a4, int, dfd, const char __user *, pathname) + u64, a3, u64, a4, int, dfd, const char __user *, pathname) { return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4), dfd, pathname); diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c index df1e3e4..6e58e97 100644 --- a/arch/mips/kernel/mips_ksyms.c +++ b/arch/mips/kernel/mips_ksyms.c @@ -17,9 +17,9 @@ extern void *__bzero(void *__s, size_t __count); extern long __strncpy_from_user_nocheck_asm(char *__to, - const char *__from, long __len); + const char *__from, long __len); extern long __strncpy_from_user_asm(char *__to, const char *__from, - long __len); + long __len); extern long __strlen_user_nocheck_asm(const char *s); extern long __strlen_user_asm(const char *s); extern long __strnlen_user_nocheck_asm(const char *s); diff --git a/arch/mips/kernel/module-rela.c b/arch/mips/kernel/module-rela.c index 61d6002..2b70723 100644 --- a/arch/mips/kernel/module-rela.c +++ b/arch/mips/kernel/module-rela.c @@ -55,7 +55,7 @@ static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v) static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v) { *location = (*location & 0xffff0000) | - ((((long long) v + 0x8000LL) >> 16) & 0xffff); + ((((long long) v + 0x8000LL) >> 16) & 0xffff); return 0; } @@ -78,7 +78,7 @@ static int apply_r_mips_higher_rela(struct module *me, u32 *location, Elf_Addr v) { *location = (*location & 0xffff0000) | - ((((long long) v + 0x80008000LL) >> 32) & 0xffff); + ((((long long) v + 0x80008000LL) >> 32) & 0xffff); return 0; } @@ -87,7 +87,7 @@ static int apply_r_mips_highest_rela(struct module *me, u32 *location, Elf_Addr v) { *location = (*location & 0xffff0000) | - ((((long long) v + 0x800080008000LL) >> 48) & 0xffff); + ((((long long) v + 0x800080008000LL) >> 48) & 0xffff); return 0; } diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index 07ff581..977a623 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -79,7 +79,7 @@ static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v) } *location = (*location & ~0x03ffffff) | - ((*location + (v >> 2)) & 0x03ffffff); + ((*location + (v >> 2)) & 0x03ffffff); return 0; } @@ -122,7 +122,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) struct mips_hi16 *l; Elf_Addr val, vallo; - /* Sign extend the addend we extract from the lo insn. */ + /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; if (me->arch.r_mips_hi16_list != NULL) { @@ -165,7 +165,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) } /* - * Ok, we're done with the HI16 relocs. Now deal with the LO16. + * Ok, we're done with the HI16 relocs. Now deal with the LO16. */ val = v + vallo; insnlo = (insnlo & ~0xffff) | (val & 0xffff); @@ -230,7 +230,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, } /* - * Normally the hi16 list should be deallocated at this point. A + * Normally the hi16 list should be deallocated at this point. A * malformed binary however could contain a series of R_MIPS_HI16 * relocations not followed by a R_MIPS_LO16 relocation. In that * case, free up the list and return an error. @@ -261,7 +261,7 @@ const struct exception_table_entry *search_module_dbetables(unsigned long addr) spin_unlock_irqrestore(&dbe_lock, flags); /* Now, if we found one, we are running inside it now, hence - we cannot unload the module, hence no refcnt needed. */ + we cannot unload the module, hence no refcnt needed. */ return e; } diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S index 207f134..0e23343 100644 --- a/arch/mips/kernel/octeon_switch.S +++ b/arch/mips/kernel/octeon_switch.S @@ -30,7 +30,7 @@ /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti, int usedfpu) + * struct thread_info *next_ti, int usedfpu) */ .align 7 LEAF(resume) @@ -69,7 +69,7 @@ 1: #if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0 /* Check if we need to store CVMSEG state */ - mfc0 t0, $11,7 /* CvmMemCtl */ + mfc0 t0, $11,7 /* CvmMemCtl */ bbit0 t0, 6, 3f /* Is user access enabled? */ /* Store the CVMSEG state */ @@ -77,8 +77,8 @@ andi t0, 0x3f /* Multiply * (cache line size/sizeof(long)/2) */ sll t0, 7-LONGLOG-1 - li t1, -32768 /* Base address of CVMSEG */ - LONG_ADDI t2, a0, THREAD_CVMSEG /* Where to store CVMSEG to */ + li t1, -32768 /* Base address of CVMSEG */ + LONG_ADDI t2, a0, THREAD_CVMSEG /* Where to store CVMSEG to */ synciobdma 2: .set noreorder @@ -89,13 +89,13 @@ LONG_S t8, 0(t2) /* Store CVMSEG to thread storage */ LONG_ADDU t2, LONGSIZE*2 /* Increment loc in thread storage */ bnez t0, 2b /* Loop until we've copied it all */ - LONG_S t9, -LONGSIZE(t2)/* Store CVMSEG to thread storage */ + LONG_S t9, -LONGSIZE(t2)/* Store CVMSEG to thread storage */ .set reorder /* Disable access to CVMSEG */ - mfc0 t0, $11,7 /* CvmMemCtl */ + mfc0 t0, $11,7 /* CvmMemCtl */ xori t0, t0, 0x40 /* Bit 6 is CVMSEG user enable */ - mtc0 t0, $11,7 /* CvmMemCtl */ + mtc0 t0, $11,7 /* CvmMemCtl */ #endif 3: /* @@ -133,7 +133,7 @@ dmfc0 t9, $9,7 /* CvmCtl register. */ - /* Save the COP2 CRC state */ + /* Save the COP2 CRC state */ dmfc2 t0, 0x0201 dmfc2 t1, 0x0202 dmfc2 t2, 0x0200 @@ -149,30 +149,30 @@ sd t0, OCTEON_CP2_LLM_DAT(a0) sd t1, OCTEON_CP2_LLM_DAT+8(a0) -1: bbit1 t9, 26, 3f /* done if CvmCtl[NOCRYPTO] set */ +1: bbit1 t9, 26, 3f /* done if CvmCtl[NOCRYPTO] set */ /* Save the COP2 crypto state */ - /* this part is mostly common to both pass 1 and later revisions */ - dmfc2 t0, 0x0084 - dmfc2 t1, 0x0080 - dmfc2 t2, 0x0081 - dmfc2 t3, 0x0082 + /* this part is mostly common to both pass 1 and later revisions */ + dmfc2 t0, 0x0084 + dmfc2 t1, 0x0080 + dmfc2 t2, 0x0081 + dmfc2 t3, 0x0082 sd t0, OCTEON_CP2_3DES_IV(a0) - dmfc2 t0, 0x0088 + dmfc2 t0, 0x0088 sd t1, OCTEON_CP2_3DES_KEY(a0) - dmfc2 t1, 0x0111 /* only necessary for pass 1 */ + dmfc2 t1, 0x0111 /* only necessary for pass 1 */ sd t2, OCTEON_CP2_3DES_KEY+8(a0) - dmfc2 t2, 0x0102 + dmfc2 t2, 0x0102 sd t3, OCTEON_CP2_3DES_KEY+16(a0) - dmfc2 t3, 0x0103 + dmfc2 t3, 0x0103 sd t0, OCTEON_CP2_3DES_RESULT(a0) - dmfc2 t0, 0x0104 - sd t1, OCTEON_CP2_AES_INP0(a0) /* only necessary for pass 1 */ - dmfc2 t1, 0x0105 + dmfc2 t0, 0x0104 + sd t1, OCTEON_CP2_AES_INP0(a0) /* only necessary for pass 1 */ + dmfc2 t1, 0x0105 sd t2, OCTEON_CP2_AES_IV(a0) dmfc2 t2, 0x0106 sd t3, OCTEON_CP2_AES_IV+8(a0) - dmfc2 t3, 0x0107 + dmfc2 t3, 0x0107 sd t0, OCTEON_CP2_AES_KEY(a0) dmfc2 t0, 0x0110 sd t1, OCTEON_CP2_AES_KEY+8(a0) @@ -180,7 +180,7 @@ sd t2, OCTEON_CP2_AES_KEY+16(a0) dmfc2 t2, 0x0101 sd t3, OCTEON_CP2_AES_KEY+24(a0) - mfc0 t3, $15,0 /* Get the processor ID register */ + mfc0 t3, $15,0 /* Get the processor ID register */ sd t0, OCTEON_CP2_AES_KEYLEN(a0) li t0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */ sd t1, OCTEON_CP2_AES_RESULT(a0) @@ -188,7 +188,7 @@ /* Skip to the Pass1 version of the remainder of the COP2 state */ beq t3, t0, 2f - /* the non-pass1 state when !CvmCtl[NOCRYPTO] */ + /* the non-pass1 state when !CvmCtl[NOCRYPTO] */ dmfc2 t1, 0x0240 dmfc2 t2, 0x0241 dmfc2 t3, 0x0242 @@ -214,7 +214,7 @@ sd t2, OCTEON_CP2_HSH_DATW+72(a0) dmfc2 t2, 0x024D sd t3, OCTEON_CP2_HSH_DATW+80(a0) - dmfc2 t3, 0x024E + dmfc2 t3, 0x024E sd t0, OCTEON_CP2_HSH_DATW+88(a0) dmfc2 t0, 0x0250 sd t1, OCTEON_CP2_HSH_DATW+96(a0) @@ -232,9 +232,9 @@ sd t3, OCTEON_CP2_HSH_IVW+24(a0) dmfc2 t3, 0x0257 sd t0, OCTEON_CP2_HSH_IVW+32(a0) - dmfc2 t0, 0x0258 + dmfc2 t0, 0x0258 sd t1, OCTEON_CP2_HSH_IVW+40(a0) - dmfc2 t1, 0x0259 + dmfc2 t1, 0x0259 sd t2, OCTEON_CP2_HSH_IVW+48(a0) dmfc2 t2, 0x025E sd t3, OCTEON_CP2_HSH_IVW+56(a0) @@ -247,7 +247,7 @@ sd t0, OCTEON_CP2_GFM_RESULT+8(a0) jr ra -2: /* pass 1 special stuff when !CvmCtl[NOCRYPTO] */ +2: /* pass 1 special stuff when !CvmCtl[NOCRYPTO] */ dmfc2 t3, 0x0040 dmfc2 t0, 0x0041 dmfc2 t1, 0x0042 @@ -269,7 +269,7 @@ sd t3, OCTEON_CP2_HSH_IVW+8(a0) sd t0, OCTEON_CP2_HSH_IVW+16(a0) -3: /* pass 1 or CvmCtl[NOCRYPTO] set */ +3: /* pass 1 or CvmCtl[NOCRYPTO] set */ jr ra END(octeon_cop2_save) @@ -280,19 +280,19 @@ .set push .set noreorder LEAF(octeon_cop2_restore) - /* First cache line was prefetched before the call */ - pref 4, 128(a0) + /* First cache line was prefetched before the call */ + pref 4, 128(a0) dmfc0 t9, $9,7 /* CvmCtl register. */ - pref 4, 256(a0) + pref 4, 256(a0) ld t0, OCTEON_CP2_CRC_IV(a0) - pref 4, 384(a0) + pref 4, 384(a0) ld t1, OCTEON_CP2_CRC_LENGTH(a0) ld t2, OCTEON_CP2_CRC_POLY(a0) /* Restore the COP2 CRC state */ dmtc2 t0, 0x0201 - dmtc2 t1, 0x1202 + dmtc2 t1, 0x1202 bbit1 t9, 28, 2f /* Skip LLM if CvmCtl[NODFA_CP2] is set */ dmtc2 t2, 0x4200 @@ -310,19 +310,19 @@ ld t0, OCTEON_CP2_3DES_IV(a0) ld t1, OCTEON_CP2_3DES_KEY(a0) ld t2, OCTEON_CP2_3DES_KEY+8(a0) - dmtc2 t0, 0x0084 + dmtc2 t0, 0x0084 ld t0, OCTEON_CP2_3DES_KEY+16(a0) - dmtc2 t1, 0x0080 + dmtc2 t1, 0x0080 ld t1, OCTEON_CP2_3DES_RESULT(a0) - dmtc2 t2, 0x0081 + dmtc2 t2, 0x0081 ld t2, OCTEON_CP2_AES_INP0(a0) /* only really needed for pass 1 */ dmtc2 t0, 0x0082 ld t0, OCTEON_CP2_AES_IV(a0) - dmtc2 t1, 0x0098 + dmtc2 t1, 0x0098 ld t1, OCTEON_CP2_AES_IV+8(a0) - dmtc2 t2, 0x010A /* only really needed for pass 1 */ + dmtc2 t2, 0x010A /* only really needed for pass 1 */ ld t2, OCTEON_CP2_AES_KEY(a0) - dmtc2 t0, 0x0102 + dmtc2 t0, 0x0102 ld t0, OCTEON_CP2_AES_KEY+8(a0) dmtc2 t1, 0x0103 ld t1, OCTEON_CP2_AES_KEY+16(a0) @@ -334,14 +334,14 @@ ld t1, OCTEON_CP2_AES_RESULT(a0) dmtc2 t2, 0x0107 ld t2, OCTEON_CP2_AES_RESULT+8(a0) - mfc0 t3, $15,0 /* Get the processor ID register */ + mfc0 t3, $15,0 /* Get the processor ID register */ dmtc2 t0, 0x0110 li t0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */ dmtc2 t1, 0x0100 bne t0, t3, 3f /* Skip the next stuff for non-pass1 */ dmtc2 t2, 0x0101 - /* this code is specific for pass 1 */ + /* this code is specific for pass 1 */ ld t0, OCTEON_CP2_HSH_DATW(a0) ld t1, OCTEON_CP2_HSH_DATW+8(a0) ld t2, OCTEON_CP2_HSH_DATW+16(a0) @@ -361,10 +361,10 @@ ld t0, OCTEON_CP2_HSH_IVW+16(a0) dmtc2 t1, 0x0048 dmtc2 t2, 0x0049 - b done_restore /* unconditional branch */ + b done_restore /* unconditional branch */ dmtc2 t0, 0x004A -3: /* this is post-pass1 code */ +3: /* this is post-pass1 code */ ld t2, OCTEON_CP2_HSH_DATW(a0) ld t0, OCTEON_CP2_HSH_DATW+8(a0) ld t1, OCTEON_CP2_HSH_DATW+16(a0) @@ -433,7 +433,7 @@ done_restore: * sp is assumed to point to a struct pt_regs * * NOTE: This is called in SAVE_SOME in stackframe.h. It can only - * safely modify k0 and k1. + * safely modify k0 and k1. */ .align 7 .set push @@ -446,14 +446,14 @@ done_restore: /* Save the multiplier state */ v3mulu k0, $0, $0 v3mulu k1, $0, $0 - sd k0, PT_MTP(sp) /* PT_MTP has P0 */ + sd k0, PT_MTP(sp) /* PT_MTP has P0 */ v3mulu k0, $0, $0 sd k1, PT_MTP+8(sp) /* PT_MTP+8 has P1 */ ori k1, $0, 1 v3mulu k1, k1, $0 sd k0, PT_MTP+16(sp) /* PT_MTP+16 has P2 */ v3mulu k0, $0, $0 - sd k1, PT_MPL(sp) /* PT_MPL has MPL0 */ + sd k1, PT_MPL(sp) /* PT_MPL has MPL0 */ v3mulu k1, $0, $0 sd k0, PT_MPL+8(sp) /* PT_MPL+8 has MPL1 */ jr ra @@ -475,19 +475,19 @@ done_restore: .set noreorder LEAF(octeon_mult_restore) dmfc0 k1, $9,7 /* CvmCtl register. */ - ld v0, PT_MPL(sp) /* MPL0 */ - ld v1, PT_MPL+8(sp) /* MPL1 */ - ld k0, PT_MPL+16(sp) /* MPL2 */ + ld v0, PT_MPL(sp) /* MPL0 */ + ld v1, PT_MPL+8(sp) /* MPL1 */ + ld k0, PT_MPL+16(sp) /* MPL2 */ bbit1 k1, 27, 1f /* Skip CvmCtl[NOMUL] */ /* Normally falls through, so no time wasted here */ nop /* Restore the multiplier state */ - ld k1, PT_MTP+16(sp) /* P2 */ + ld k1, PT_MTP+16(sp) /* P2 */ MTM0 v0 /* MPL0 */ ld v0, PT_MTP+8(sp) /* P1 */ MTM1 v1 /* MPL1 */ - ld v1, PT_MTP(sp) /* P0 */ + ld v1, PT_MTP(sp) /* P0 */ MTM2 k0 /* MPL2 */ MTP2 k1 /* P2 */ MTP1 v0 /* P1 */ diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index d9c81c5..45f1ffc 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -103,13 +103,13 @@ static struct mips_pmu mipspmu; #define M_CONFIG1_PC (1 << 4) -#define M_PERFCTL_EXL (1 << 0) -#define M_PERFCTL_KERNEL (1 << 1) -#define M_PERFCTL_SUPERVISOR (1 << 2) -#define M_PERFCTL_USER (1 << 3) -#define M_PERFCTL_INTERRUPT_ENABLE (1 << 4) +#define M_PERFCTL_EXL (1 << 0) +#define M_PERFCTL_KERNEL (1 << 1) +#define M_PERFCTL_SUPERVISOR (1 << 2) +#define M_PERFCTL_USER (1 << 3) +#define M_PERFCTL_INTERRUPT_ENABLE (1 << 4) #define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5) -#define M_PERFCTL_VPEID(vpe) ((vpe) << 16) +#define M_PERFCTL_VPEID(vpe) ((vpe) << 16) #ifdef CONFIG_CPU_BMIPS5000 #define M_PERFCTL_MT_EN(filter) 0 @@ -117,13 +117,13 @@ static struct mips_pmu mipspmu; #define M_PERFCTL_MT_EN(filter) ((filter) << 20) #endif /* CONFIG_CPU_BMIPS5000 */ -#define M_TC_EN_ALL M_PERFCTL_MT_EN(0) -#define M_TC_EN_VPE M_PERFCTL_MT_EN(1) -#define M_TC_EN_TC M_PERFCTL_MT_EN(2) -#define M_PERFCTL_TCID(tcid) ((tcid) << 22) -#define M_PERFCTL_WIDE (1 << 30) -#define M_PERFCTL_MORE (1 << 31) -#define M_PERFCTL_TC (1 << 30) +#define M_TC_EN_ALL M_PERFCTL_MT_EN(0) +#define M_TC_EN_VPE M_PERFCTL_MT_EN(1) +#define M_TC_EN_TC M_PERFCTL_MT_EN(2) +#define M_PERFCTL_TCID(tcid) ((tcid) << 22) +#define M_PERFCTL_WIDE (1 << 30) +#define M_PERFCTL_MORE (1 << 31) +#define M_PERFCTL_TC (1 << 30) #define M_PERFCTL_COUNT_EVENT_WHENEVER (M_PERFCTL_EXL | \ M_PERFCTL_KERNEL | \ @@ -827,7 +827,7 @@ static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL }, [PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL }, [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL }, - [PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL }, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL }, [PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL }, [PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL }, @@ -1371,7 +1371,7 @@ static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev) (b) == 25 || (b) == 39 || (r) == 44 || (r) == 174 || \ (r) == 176 || ((b) >= 50 && (b) <= 55) || \ ((b) >= 64 && (b) <= 67)) -#define IS_RANGE_V_34K_EVENT(r) ((r) == 47) +#define IS_RANGE_V_34K_EVENT(r) ((r) == 47) #endif /* 74K */ diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 07dff54..135c4aa 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1995, 1996, 2001 Ralf Baechle * Copyright (C) 2001, 2004 MIPS Technologies, Inc. - * Copyright (C) 2004 Maciej W. Rozycki + * Copyright (C) 2004 Maciej W. Rozycki */ #include <linux/delay.h> #include <linux/kernel.h> @@ -64,6 +64,28 @@ static int show_cpuinfo(struct seq_file *m, void *v) cpu_data[n].watch_reg_masks[i]); seq_printf(m, "]\n"); } + if (cpu_has_mips_r) { + seq_printf(m, "isa\t\t\t:"); + if (cpu_has_mips_1) + seq_printf(m, "%s", "mips1"); + if (cpu_has_mips_2) + seq_printf(m, "%s", " mips2"); + if (cpu_has_mips_3) + seq_printf(m, "%s", " mips3"); + if (cpu_has_mips_4) + seq_printf(m, "%s", " mips4"); + if (cpu_has_mips_5) + seq_printf(m, "%s", " mips5"); + if (cpu_has_mips32r1) + seq_printf(m, "%s", " mips32r1"); + if (cpu_has_mips32r2) + seq_printf(m, "%s", " mips32r2"); + if (cpu_has_mips64r1) + seq_printf(m, "%s", " mips64r1"); + if (cpu_has_mips64r2) + seq_printf(m, "%s", " mips64r2"); + seq_printf(m, "\n"); + } seq_printf(m, "ASEs implemented\t:"); if (cpu_has_mips16) seq_printf(m, "%s", " mips16"); @@ -73,6 +95,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (cpu_has_dsp) seq_printf(m, "%s", " dsp"); if (cpu_has_dsp2) seq_printf(m, "%s", " dsp2"); if (cpu_has_mipsmt) seq_printf(m, "%s", " mt"); + if (cpu_has_mmips) seq_printf(m, "%s", " micromips"); + if (cpu_has_vz) seq_printf(m, "%s", " vz"); seq_printf(m, "\n"); seq_printf(m, "shadow register sets\t: %d\n", diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index a33d2ef8..3be4405 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -154,8 +154,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, return 0; } *childregs = *regs; - childregs->regs[7] = 0; /* Clear error flag */ - childregs->regs[2] = 0; /* Child gets zero as return value */ + childregs->regs[7] = 0; /* Clear error flag */ + childregs->regs[2] = 0; /* Child gets zero as return value */ if (usp) childregs->regs[29] = usp; ti->addr_limit = USER_DS; diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 4812c6d..9c6299c 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -50,7 +50,7 @@ void ptrace_disable(struct task_struct *child) } /* - * Read a general register set. We always use the 64-bit format, even + * Read a general register set. We always use the 64-bit format, even * for 32-bit kernels and for 32-bit processes on a 64-bit kernel. * Registers are sign extended to fill the available space. */ @@ -326,7 +326,7 @@ long arch_ptrace(struct task_struct *child, long request, case FPC_CSR: tmp = child->thread.fpu.fcr31; break; - case FPC_EIR: { /* implementation / version register */ + case FPC_EIR: { /* implementation / version register */ unsigned int flags; #ifdef CONFIG_MIPS_MT_SMTC unsigned long irqflags; @@ -520,10 +520,10 @@ static inline int audit_arch(void) { int arch = EM_MIPS; #ifdef CONFIG_64BIT - arch |= __AUDIT_ARCH_64BIT; + arch |= __AUDIT_ARCH_64BIT; #endif #if defined(__LITTLE_ENDIAN) - arch |= __AUDIT_ARCH_LE; + arch |= __AUDIT_ARCH_LE; #endif return arch; } @@ -546,7 +546,7 @@ asmlinkage void syscall_trace_enter(struct pt_regs *regs) /* The 0x80 provides a way for the tracing parent to distinguish between a syscall stop and SIGTRAP delivery */ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? - 0x80 : 0)); + 0x80 : 0)); /* * this isn't the same as continuing with a signal, but it will do @@ -581,7 +581,7 @@ asmlinkage void syscall_trace_leave(struct pt_regs *regs) /* The 0x80 provides a way for the tracing parent to distinguish between a syscall stop and SIGTRAP delivery */ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? - 0x80 : 0)); + 0x80 : 0)); /* * this isn't the same as continuing with a signal, but it will do diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index a3b0178..9486055 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -124,7 +124,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, case FPC_CSR: tmp = child->thread.fpu.fcr31; break; - case FPC_EIR: { /* implementation / version register */ + case FPC_EIR: { /* implementation / version register */ unsigned int flags; #ifdef CONFIG_MIPS_MT_SMTC unsigned int irqflags; diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index 61c8a0f..f31063d 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -30,38 +30,38 @@ LEAF(_save_fp_context) li v0, 0 # assume success cfc1 t1,fcr31 - EX(swc1 $f0,(SC_FPREGS+0)(a0)) - EX(swc1 $f1,(SC_FPREGS+8)(a0)) - EX(swc1 $f2,(SC_FPREGS+16)(a0)) - EX(swc1 $f3,(SC_FPREGS+24)(a0)) - EX(swc1 $f4,(SC_FPREGS+32)(a0)) - EX(swc1 $f5,(SC_FPREGS+40)(a0)) - EX(swc1 $f6,(SC_FPREGS+48)(a0)) - EX(swc1 $f7,(SC_FPREGS+56)(a0)) - EX(swc1 $f8,(SC_FPREGS+64)(a0)) - EX(swc1 $f9,(SC_FPREGS+72)(a0)) - EX(swc1 $f10,(SC_FPREGS+80)(a0)) - EX(swc1 $f11,(SC_FPREGS+88)(a0)) - EX(swc1 $f12,(SC_FPREGS+96)(a0)) - EX(swc1 $f13,(SC_FPREGS+104)(a0)) - EX(swc1 $f14,(SC_FPREGS+112)(a0)) - EX(swc1 $f15,(SC_FPREGS+120)(a0)) - EX(swc1 $f16,(SC_FPREGS+128)(a0)) - EX(swc1 $f17,(SC_FPREGS+136)(a0)) - EX(swc1 $f18,(SC_FPREGS+144)(a0)) - EX(swc1 $f19,(SC_FPREGS+152)(a0)) - EX(swc1 $f20,(SC_FPREGS+160)(a0)) - EX(swc1 $f21,(SC_FPREGS+168)(a0)) - EX(swc1 $f22,(SC_FPREGS+176)(a0)) - EX(swc1 $f23,(SC_FPREGS+184)(a0)) - EX(swc1 $f24,(SC_FPREGS+192)(a0)) - EX(swc1 $f25,(SC_FPREGS+200)(a0)) - EX(swc1 $f26,(SC_FPREGS+208)(a0)) - EX(swc1 $f27,(SC_FPREGS+216)(a0)) - EX(swc1 $f28,(SC_FPREGS+224)(a0)) - EX(swc1 $f29,(SC_FPREGS+232)(a0)) - EX(swc1 $f30,(SC_FPREGS+240)(a0)) - EX(swc1 $f31,(SC_FPREGS+248)(a0)) + EX(swc1 $f0,(SC_FPREGS+0)(a0)) + EX(swc1 $f1,(SC_FPREGS+8)(a0)) + EX(swc1 $f2,(SC_FPREGS+16)(a0)) + EX(swc1 $f3,(SC_FPREGS+24)(a0)) + EX(swc1 $f4,(SC_FPREGS+32)(a0)) + EX(swc1 $f5,(SC_FPREGS+40)(a0)) + EX(swc1 $f6,(SC_FPREGS+48)(a0)) + EX(swc1 $f7,(SC_FPREGS+56)(a0)) + EX(swc1 $f8,(SC_FPREGS+64)(a0)) + EX(swc1 $f9,(SC_FPREGS+72)(a0)) + EX(swc1 $f10,(SC_FPREGS+80)(a0)) + EX(swc1 $f11,(SC_FPREGS+88)(a0)) + EX(swc1 $f12,(SC_FPREGS+96)(a0)) + EX(swc1 $f13,(SC_FPREGS+104)(a0)) + EX(swc1 $f14,(SC_FPREGS+112)(a0)) + EX(swc1 $f15,(SC_FPREGS+120)(a0)) + EX(swc1 $f16,(SC_FPREGS+128)(a0)) + EX(swc1 $f17,(SC_FPREGS+136)(a0)) + EX(swc1 $f18,(SC_FPREGS+144)(a0)) + EX(swc1 $f19,(SC_FPREGS+152)(a0)) + EX(swc1 $f20,(SC_FPREGS+160)(a0)) + EX(swc1 $f21,(SC_FPREGS+168)(a0)) + EX(swc1 $f22,(SC_FPREGS+176)(a0)) + EX(swc1 $f23,(SC_FPREGS+184)(a0)) + EX(swc1 $f24,(SC_FPREGS+192)(a0)) + EX(swc1 $f25,(SC_FPREGS+200)(a0)) + EX(swc1 $f26,(SC_FPREGS+208)(a0)) + EX(swc1 $f27,(SC_FPREGS+216)(a0)) + EX(swc1 $f28,(SC_FPREGS+224)(a0)) + EX(swc1 $f29,(SC_FPREGS+232)(a0)) + EX(swc1 $f30,(SC_FPREGS+240)(a0)) + EX(swc1 $f31,(SC_FPREGS+248)(a0)) EX(sw t1,(SC_FPC_CSR)(a0)) cfc1 t0,$0 # implementation/version jr ra @@ -82,38 +82,38 @@ LEAF(_save_fp_context) LEAF(_restore_fp_context) li v0, 0 # assume success EX(lw t0,(SC_FPC_CSR)(a0)) - EX(lwc1 $f0,(SC_FPREGS+0)(a0)) - EX(lwc1 $f1,(SC_FPREGS+8)(a0)) - EX(lwc1 $f2,(SC_FPREGS+16)(a0)) - EX(lwc1 $f3,(SC_FPREGS+24)(a0)) - EX(lwc1 $f4,(SC_FPREGS+32)(a0)) - EX(lwc1 $f5,(SC_FPREGS+40)(a0)) - EX(lwc1 $f6,(SC_FPREGS+48)(a0)) - EX(lwc1 $f7,(SC_FPREGS+56)(a0)) - EX(lwc1 $f8,(SC_FPREGS+64)(a0)) - EX(lwc1 $f9,(SC_FPREGS+72)(a0)) - EX(lwc1 $f10,(SC_FPREGS+80)(a0)) - EX(lwc1 $f11,(SC_FPREGS+88)(a0)) - EX(lwc1 $f12,(SC_FPREGS+96)(a0)) - EX(lwc1 $f13,(SC_FPREGS+104)(a0)) - EX(lwc1 $f14,(SC_FPREGS+112)(a0)) - EX(lwc1 $f15,(SC_FPREGS+120)(a0)) - EX(lwc1 $f16,(SC_FPREGS+128)(a0)) - EX(lwc1 $f17,(SC_FPREGS+136)(a0)) - EX(lwc1 $f18,(SC_FPREGS+144)(a0)) - EX(lwc1 $f19,(SC_FPREGS+152)(a0)) - EX(lwc1 $f20,(SC_FPREGS+160)(a0)) - EX(lwc1 $f21,(SC_FPREGS+168)(a0)) - EX(lwc1 $f22,(SC_FPREGS+176)(a0)) - EX(lwc1 $f23,(SC_FPREGS+184)(a0)) - EX(lwc1 $f24,(SC_FPREGS+192)(a0)) - EX(lwc1 $f25,(SC_FPREGS+200)(a0)) - EX(lwc1 $f26,(SC_FPREGS+208)(a0)) - EX(lwc1 $f27,(SC_FPREGS+216)(a0)) - EX(lwc1 $f28,(SC_FPREGS+224)(a0)) - EX(lwc1 $f29,(SC_FPREGS+232)(a0)) - EX(lwc1 $f30,(SC_FPREGS+240)(a0)) - EX(lwc1 $f31,(SC_FPREGS+248)(a0)) + EX(lwc1 $f0,(SC_FPREGS+0)(a0)) + EX(lwc1 $f1,(SC_FPREGS+8)(a0)) + EX(lwc1 $f2,(SC_FPREGS+16)(a0)) + EX(lwc1 $f3,(SC_FPREGS+24)(a0)) + EX(lwc1 $f4,(SC_FPREGS+32)(a0)) + EX(lwc1 $f5,(SC_FPREGS+40)(a0)) + EX(lwc1 $f6,(SC_FPREGS+48)(a0)) + EX(lwc1 $f7,(SC_FPREGS+56)(a0)) + EX(lwc1 $f8,(SC_FPREGS+64)(a0)) + EX(lwc1 $f9,(SC_FPREGS+72)(a0)) + EX(lwc1 $f10,(SC_FPREGS+80)(a0)) + EX(lwc1 $f11,(SC_FPREGS+88)(a0)) + EX(lwc1 $f12,(SC_FPREGS+96)(a0)) + EX(lwc1 $f13,(SC_FPREGS+104)(a0)) + EX(lwc1 $f14,(SC_FPREGS+112)(a0)) + EX(lwc1 $f15,(SC_FPREGS+120)(a0)) + EX(lwc1 $f16,(SC_FPREGS+128)(a0)) + EX(lwc1 $f17,(SC_FPREGS+136)(a0)) + EX(lwc1 $f18,(SC_FPREGS+144)(a0)) + EX(lwc1 $f19,(SC_FPREGS+152)(a0)) + EX(lwc1 $f20,(SC_FPREGS+160)(a0)) + EX(lwc1 $f21,(SC_FPREGS+168)(a0)) + EX(lwc1 $f22,(SC_FPREGS+176)(a0)) + EX(lwc1 $f23,(SC_FPREGS+184)(a0)) + EX(lwc1 $f24,(SC_FPREGS+192)(a0)) + EX(lwc1 $f25,(SC_FPREGS+200)(a0)) + EX(lwc1 $f26,(SC_FPREGS+208)(a0)) + EX(lwc1 $f27,(SC_FPREGS+216)(a0)) + EX(lwc1 $f28,(SC_FPREGS+224)(a0)) + EX(lwc1 $f29,(SC_FPREGS+232)(a0)) + EX(lwc1 $f30,(SC_FPREGS+240)(a0)) + EX(lwc1 $f31,(SC_FPREGS+248)(a0)) jr ra ctc1 t0,fcr31 END(_restore_fp_context) diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S index 8d32d5a..5266c6e 100644 --- a/arch/mips/kernel/r2300_switch.S +++ b/arch/mips/kernel/r2300_switch.S @@ -42,7 +42,7 @@ /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti, int usedfpu) + * struct thread_info *next_ti, int usedfpu) */ LEAF(resume) mfc0 t1, CP0_STATUS diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index 8decdfa..5e51219 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -40,7 +40,7 @@ /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti, int usedfpu) + * struct thread_info *next_ti, int usedfpu) */ .align 5 LEAF(resume) @@ -53,7 +53,7 @@ * check if we need to save FPU registers */ - beqz a3, 1f + beqz a3, 1f PTR_L t3, TASK_THREAD_INFO(a0) /* diff --git a/arch/mips/kernel/relocate_kernel.S b/arch/mips/kernel/relocate_kernel.S index 804ebb2..43d2d78 100644 --- a/arch/mips/kernel/relocate_kernel.S +++ b/arch/mips/kernel/relocate_kernel.S @@ -33,7 +33,7 @@ process_entry: b process_entry 1: - /* indirection page, update s0 */ + /* indirection page, update s0 */ and s3, s2, 0x2 beq s3, zero, 1f and s0, s2, ~0x2 @@ -69,7 +69,7 @@ done: of kexec_flag. */ bal 1f - 1: move t1,ra; + 1: move t1,ra; PTR_LA t2,1b PTR_LA t0,kexec_flag PTR_SUB t0,t0,t2; @@ -158,10 +158,10 @@ arg3: PTR 0x0 */ secondary_kexec_args: EXPORT(secondary_kexec_args) -s_arg0: PTR 0x0 -s_arg1: PTR 0x0 -s_arg2: PTR 0x0 -s_arg3: PTR 0x0 +s_arg0: PTR 0x0 +s_arg1: PTR 0x0 +s_arg2: PTR 0x0 +s_arg3: PTR 0x0 .size secondary_kexec_args,PTRSIZE*4 kexec_flag: LONG 0x1 diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 88f7b50..93c070b 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -252,12 +252,12 @@ int rtlx_release(int index) unsigned int rtlx_read_poll(int index, int can_sleep) { - struct rtlx_channel *chan; + struct rtlx_channel *chan; - if (rtlx == NULL) - return 0; + if (rtlx == NULL) + return 0; - chan = &rtlx->channel[index]; + chan = &rtlx->channel[index]; /* data available to read? */ if (chan->lx_read == chan->lx_write) { @@ -446,8 +446,8 @@ static ssize_t file_write(struct file *file, const char __user * buffer, return -EAGAIN; __wait_event_interruptible(channel_wqs[minor].rt_queue, - rtlx_write_poll(minor), - ret); + rtlx_write_poll(minor), + ret); if (ret) return ret; } @@ -457,11 +457,11 @@ static ssize_t file_write(struct file *file, const char __user * buffer, static const struct file_operations rtlx_fops = { .owner = THIS_MODULE, - .open = file_open, + .open = file_open, .release = file_release, .write = file_write, - .read = file_read, - .poll = file_poll, + .read = file_read, + .poll = file_poll, .llseek = noop_llseek, }; diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 80ff942..9ea2964 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -24,7 +24,7 @@ /* Highest syscall used of any syscall flavour */ #define MAX_SYSCALL_NO __NR_O32_Linux + __NR_O32_Linux_syscalls - .align 5 + .align 5 NESTED(handle_sys, PT_SIZE, sp) .set noat SAVE_SOME @@ -54,7 +54,7 @@ stack_done: lw t0, TI_FLAGS($28) # syscall tracing enabled? li t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT and t0, t1 - bnez t0, syscall_trace_entry # -> yes + bnez t0, syscall_trace_entry # -> yes jalr t2 # Do The Real Thing (TM) @@ -126,8 +126,8 @@ stackargs: la t1, 5f # load up to 3 arguments subu t1, t3 1: lw t5, 16(t0) # argument #5 from usp - .set push - .set noreorder + .set push + .set noreorder .set nomacro jr t1 addiu t1, 6f - 5f @@ -205,7 +205,7 @@ illegal_syscall: jr t2 /* Unreached */ -einval: li v0, -ENOSYS +einval: li v0, -ENOSYS jr ra END(sys_syscall) @@ -354,7 +354,7 @@ einval: li v0, -ENOSYS sys sys_ni_syscall 0 /* was create_module */ sys sys_init_module 5 sys sys_delete_module 1 - sys sys_ni_syscall 0 /* 4130 was get_kernel_syms */ + sys sys_ni_syscall 0 /* 4130 was get_kernel_syms */ sys sys_quotactl 4 sys sys_getpgid 1 sys sys_fchdir 1 @@ -589,7 +589,7 @@ einval: li v0, -ENOSYS /* We pre-compute the number of _instruction_ bytes needed to load or store the arguments 6-8. Negative values are ignored. */ - .macro sys function, nargs + .macro sys function, nargs PTR \function LONG (\nargs << 2) - (5 << 2) .endm diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 9444ad9..36cfd40 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -25,7 +25,7 @@ #define handle_sys64 handle_sys #endif - .align 5 + .align 5 NESTED(handle_sys64, PT_SIZE, sp) #if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32) /* @@ -40,7 +40,7 @@ NESTED(handle_sys64, PT_SIZE, sp) #endif dsubu t0, v0, __NR_64_Linux # check syscall number - sltiu t0, t0, __NR_64_Linux_syscalls + 1 + sltiu t0, t0, __NR_64_Linux_syscalls + 1 #if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32) ld t1, PT_EPC(sp) # skip syscall on return daddiu t1, 4 # skip to next instruction @@ -290,7 +290,7 @@ sys_call_table: PTR sys_quotactl PTR sys_ni_syscall /* was nfsservctl */ PTR sys_ni_syscall /* res. for getpmsg */ - PTR sys_ni_syscall /* 5175 for putpmsg */ + PTR sys_ni_syscall /* 5175 for putpmsg */ PTR sys_ni_syscall /* res. for afs_syscall */ PTR sys_ni_syscall /* res. for security */ PTR sys_gettid diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 3b18a8e..693d60b 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -22,7 +22,7 @@ #define handle_sysn32 handle_sys #endif - .align 5 + .align 5 NESTED(handle_sysn32, PT_SIZE, sp) #ifndef CONFIG_MIPS32_O32 .set noat @@ -33,7 +33,7 @@ NESTED(handle_sysn32, PT_SIZE, sp) #endif dsubu t0, v0, __NR_N32_Linux # check syscall number - sltiu t0, t0, __NR_N32_Linux_syscalls + 1 + sltiu t0, t0, __NR_N32_Linux_syscalls + 1 #ifndef CONFIG_MIPS32_O32 ld t1, PT_EPC(sp) # skip syscall on return @@ -279,7 +279,7 @@ EXPORT(sysn32_call_table) PTR sys_quotactl PTR sys_ni_syscall /* was nfsservctl */ PTR sys_ni_syscall /* res. for getpmsg */ - PTR sys_ni_syscall /* 6175 for putpmsg */ + PTR sys_ni_syscall /* 6175 for putpmsg */ PTR sys_ni_syscall /* res. for afs_syscall */ PTR sys_ni_syscall /* res. for security */ PTR sys_gettid @@ -402,8 +402,8 @@ EXPORT(sysn32_call_table) PTR compat_sys_rt_tgsigqueueinfo /* 6295 */ PTR sys_perf_event_open PTR sys_accept4 - PTR compat_sys_recvmmsg - PTR sys_getdents64 + PTR compat_sys_recvmmsg + PTR sys_getdents64 PTR sys_fanotify_init /* 6300 */ PTR sys_fanotify_mark PTR sys_prlimit64 diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 063cd0d..af8887f 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -10,7 +10,7 @@ * * Hairy, the userspace application uses a different argument passing * convention than the kernel, so we have to translate things from o32 - * to ABI64 calling convention. 64-bit syscalls are also processed + * to ABI64 calling convention. 64-bit syscalls are also processed * here for now. */ #include <linux/errno.h> @@ -24,7 +24,7 @@ #include <asm/unistd.h> #include <asm/sysmips.h> - .align 5 + .align 5 NESTED(handle_sys, PT_SIZE, sp) .set noat SAVE_SOME @@ -185,7 +185,7 @@ LEAF(sys32_syscall) jr t2 /* Unreached */ -einval: li v0, -ENOSYS +einval: li v0, -ENOSYS jr ra END(sys32_syscall) @@ -284,8 +284,8 @@ sys_call_table: PTR compat_sys_old_readdir PTR sys_mips_mmap /* 4090 */ PTR sys_munmap - PTR sys_truncate - PTR sys_ftruncate + PTR compat_sys_truncate + PTR compat_sys_ftruncate PTR sys_fchmod PTR sys_fchown /* 4095 */ PTR sys_getpriority @@ -329,7 +329,7 @@ sys_call_table: PTR sys_bdflush PTR sys_sysfs /* 4135 */ PTR sys_32_personality - PTR sys_ni_syscall /* for afs_syscall */ + PTR sys_ni_syscall /* for afs_syscall */ PTR sys_setfsuid PTR sys_setfsgid PTR sys_32_llseek /* 4140 */ @@ -352,12 +352,12 @@ sys_call_table: PTR sys_munlockall PTR sys_sched_setparam PTR sys_sched_getparam - PTR sys_sched_setscheduler /* 4160 */ + PTR sys_sched_setscheduler /* 4160 */ PTR sys_sched_getscheduler PTR sys_sched_yield PTR sys_sched_get_priority_max PTR sys_sched_get_priority_min - PTR compat_sys_sched_rr_get_interval /* 4165 */ + PTR compat_sys_sched_rr_get_interval /* 4165 */ PTR compat_sys_nanosleep PTR sys_mremap PTR sys_accept @@ -387,7 +387,7 @@ sys_call_table: PTR sys_prctl PTR sys32_rt_sigreturn PTR compat_sys_rt_sigaction - PTR compat_sys_rt_sigprocmask /* 4195 */ + PTR compat_sys_rt_sigprocmask /* 4195 */ PTR compat_sys_rt_sigpending PTR compat_sys_rt_sigtimedwait PTR compat_sys_rt_sigqueueinfo diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 8c41187..4c774d5 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -8,7 +8,7 @@ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 Ralf Baechle * Copyright (C) 1996 Stoned Elipot * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) 2000, 2001, 2002, 2007 Maciej W. Rozycki + * Copyright (C) 2000, 2001, 2002, 2007 Maciej W. Rozycki */ #include <linux/init.h> #include <linux/ioport.h> @@ -449,7 +449,7 @@ static void __init bootmem_init(void) * At this stage the bootmem allocator is ready to use. * * NOTE: historically plat_mem_setup did the entire platform initialization. - * This was rather impractical because it meant plat_mem_setup had to + * This was rather impractical because it meant plat_mem_setup had to * get away without any kind of memory allocator. To keep old code from * breaking plat_setup was just renamed to plat_setup and a second platform * initialization hook for anything else was introduced. @@ -469,7 +469,7 @@ static int __init early_parse_mem(char *p) if (usermem == 0) { boot_mem_map.nr_map = 0; usermem = 1; - } + } start = 0; size = memparse(p, &p); if (*p == '@') @@ -480,34 +480,75 @@ static int __init early_parse_mem(char *p) } early_param("mem", early_parse_mem); -static void __init arch_mem_init(char **cmdline_p) +#ifdef CONFIG_PROC_VMCORE +unsigned long setup_elfcorehdr, setup_elfcorehdr_size; +static int __init early_parse_elfcorehdr(char *p) +{ + int i; + + setup_elfcorehdr = memparse(p, &p); + + for (i = 0; i < boot_mem_map.nr_map; i++) { + unsigned long start = boot_mem_map.map[i].addr; + unsigned long end = (boot_mem_map.map[i].addr + + boot_mem_map.map[i].size); + if (setup_elfcorehdr >= start && setup_elfcorehdr < end) { + /* + * Reserve from the elf core header to the end of + * the memory segment, that should all be kdump + * reserved memory. + */ + setup_elfcorehdr_size = end - setup_elfcorehdr; + break; + } + } + /* + * If we don't find it in the memory map, then we shouldn't + * have to worry about it, as the new kernel won't use it. + */ + return 0; +} +early_param("elfcorehdr", early_parse_elfcorehdr); +#endif + +static void __init arch_mem_addpart(phys_t mem, phys_t end, int type) { - phys_t init_mem, init_end, init_size; + phys_t size; + int i; + + size = end - mem; + if (!size) + return; + + /* Make sure it is in the boot_mem_map */ + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (mem >= boot_mem_map.map[i].addr && + mem < (boot_mem_map.map[i].addr + + boot_mem_map.map[i].size)) + return; + } + add_memory_region(mem, size, type); +} +static void __init arch_mem_init(char **cmdline_p) +{ extern void plat_mem_setup(void); /* call board setup routine */ plat_mem_setup(); - init_mem = PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT; - init_end = PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT; - init_size = init_end - init_mem; - if (init_size) { - /* Make sure it is in the boot_mem_map */ - int i, found; - found = 0; - for (i = 0; i < boot_mem_map.nr_map; i++) { - if (init_mem >= boot_mem_map.map[i].addr && - init_mem < (boot_mem_map.map[i].addr + - boot_mem_map.map[i].size)) { - found = 1; - break; - } - } - if (!found) - add_memory_region(init_mem, init_size, - BOOT_MEM_INIT_RAM); - } + /* + * Make sure all kernel memory is in the maps. The "UP" and + * "DOWN" are opposite for initdata since if it crosses over + * into another memory section you don't want that to be + * freed when the initdata is freed. + */ + arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT, + PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT, + BOOT_MEM_RAM); + arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT, + PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT, + BOOT_MEM_INIT_RAM); pr_info("Determined physical RAM map:\n"); print_memory_map(); @@ -537,6 +578,14 @@ static void __init arch_mem_init(char **cmdline_p) } bootmem_init(); +#ifdef CONFIG_PROC_VMCORE + if (setup_elfcorehdr && setup_elfcorehdr_size) { + printk(KERN_INFO "kdump reserved memory at %lx-%lx\n", + setup_elfcorehdr, setup_elfcorehdr_size); + reserve_bootmem(setup_elfcorehdr, setup_elfcorehdr_size, + BOOTMEM_DEFAULT); + } +#endif #ifdef CONFIG_KEXEC if (crashk_res.start != crashk_res.end) reserve_bootmem(crashk_res.start, @@ -571,7 +620,7 @@ static void __init mips_parse_crashkernel(void) return; crashk_res.start = crash_base; - crashk_res.end = crash_base + crash_size - 1; + crashk_res.end = crash_base + crash_size - 1; } static void __init request_crashkernel(struct resource *res) @@ -585,7 +634,7 @@ static void __init request_crashkernel(struct resource *res) crashk_res.start + 1) >> 20), (unsigned long)(crashk_res.start >> 20)); } -#else /* !defined(CONFIG_KEXEC) */ +#else /* !defined(CONFIG_KEXEC) */ static void __init mips_parse_crashkernel(void) { } diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 95b019d..b5e88fd 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -412,7 +412,7 @@ give_sigsegv: #endif static int setup_rt_frame(void *sig_return, struct k_sigaction *ka, - struct pt_regs *regs, int signr, sigset_t *set, + struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info) { struct rt_sigframe __user *frame; @@ -425,7 +425,7 @@ static int setup_rt_frame(void *sig_return, struct k_sigaction *ka, /* Create siginfo. */ err |= copy_siginfo_to_user(&frame->rs_info, info); - /* Create the ucontext. */ + /* Create the ucontext. */ err |= __put_user(0, &frame->rs_uc.uc_flags); err |= __put_user(NULL, &frame->rs_uc.uc_link); err |= __save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]); @@ -468,7 +468,7 @@ struct mips_abi mips_abi = { .setup_frame = setup_frame, .signal_return_offset = offsetof(struct mips_vdso, signal_trampoline), #endif - .setup_rt_frame = setup_rt_frame, + .setup_rt_frame = setup_rt_frame, .rt_signal_return_offset = offsetof(struct mips_vdso, rt_signal_trampoline), .restart = __NR_restart_syscall @@ -500,7 +500,7 @@ static void handle_signal(unsigned long sig, siginfo_t *info, regs->cp0_epc -= 4; } - regs->regs[0] = 0; /* Don't deal with this again. */ + regs->regs[0] = 0; /* Don't deal with this again. */ } if (sig_uses_siginfo(ka)) @@ -524,7 +524,7 @@ static void do_signal(struct pt_regs *regs) signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { - /* Whee! Actually deliver the signal. */ + /* Whee! Actually deliver the signal. */ handle_signal(signr, &info, &ka, regs); return; } @@ -545,7 +545,7 @@ static void do_signal(struct pt_regs *regs) regs->cp0_epc -= 4; break; } - regs->regs[0] = 0; /* Don't deal with this again. */ + regs->regs[0] = 0; /* Don't deal with this again. */ } /* diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index ad7c2be..57de8b7 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -48,7 +48,7 @@ extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user /* * Including <asm/unistd.h> would give use the 64-bit syscall numbers ... */ -#define __NR_O32_restart_syscall 4253 +#define __NR_O32_restart_syscall 4253 /* 32-bit compatibility types */ @@ -56,11 +56,11 @@ typedef unsigned int __sighandler32_t; typedef void (*vfptr_t)(void); struct ucontext32 { - u32 uc_flags; - s32 uc_link; + u32 uc_flags; + s32 uc_link; compat_stack_t uc_stack; struct sigcontext32 uc_mcontext; - compat_sigset_t uc_sigmask; /* mask last for extensibility */ + compat_sigset_t uc_sigmask; /* mask last for extensibility */ }; struct sigframe32 { @@ -302,7 +302,7 @@ SYSCALL_DEFINE3(32_sigaction, long, sig, const struct compat_sigaction __user *, return -EFAULT; err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); err |= __put_user((u32)(u64)old_ka.sa.sa_handler, - &oact->sa_handler); + &oact->sa_handler); err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig); err |= __put_user(0, &oact->sa_mask.sig[1]); err |= __put_user(0, &oact->sa_mask.sig[2]); @@ -507,7 +507,7 @@ static int setup_rt_frame_32(void *sig_return, struct k_sigaction *ka, /* Convert (siginfo_t -> compat_siginfo_t) and copy to user. */ err |= copy_siginfo_to_user32(&frame->rs_info, info); - /* Create the ucontext. */ + /* Create the ucontext. */ err |= __put_user(0, &frame->rs_uc.uc_flags); err |= __put_user(0, &frame->rs_uc.uc_link); err |= __compat_save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]); @@ -552,7 +552,7 @@ struct mips_abi mips_abi_32 = { .setup_frame = setup_frame_32, .signal_return_offset = offsetof(struct mips_vdso, o32_signal_trampoline), - .setup_rt_frame = setup_rt_frame_32, + .setup_rt_frame = setup_rt_frame_32, .rt_signal_return_offset = offsetof(struct mips_vdso, o32_rt_signal_trampoline), .restart = __NR_O32_restart_syscall diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 5f4ef2a..b2241bb 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -51,11 +51,11 @@ extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); struct ucontextn32 { - u32 uc_flags; - s32 uc_link; + u32 uc_flags; + s32 uc_link; compat_stack_t uc_stack; struct sigcontext uc_mcontext; - compat_sigset_t uc_sigmask; /* mask last for extensibility */ + compat_sigset_t uc_sigmask; /* mask last for extensibility */ }; struct rt_sigframe_n32 { @@ -115,7 +115,7 @@ static int setup_rt_frame_n32(void *sig_return, struct k_sigaction *ka, /* Create siginfo. */ err |= copy_siginfo_to_user32(&frame->rs_info, info); - /* Create the ucontext. */ + /* Create the ucontext. */ err |= __put_user(0, &frame->rs_uc.uc_flags); err |= __put_user(0, &frame->rs_uc.uc_link); err |= __compat_save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]); @@ -154,7 +154,7 @@ give_sigsegv: } struct mips_abi mips_abi_n32 = { - .setup_rt_frame = setup_rt_frame_n32, + .setup_rt_frame = setup_rt_frame_n32, .rt_signal_return_offset = offsetof(struct mips_vdso, n32_rt_signal_trampoline), .restart = __NR_N32_restart_syscall diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index 06cd0c6..c2e5d74 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -172,7 +172,7 @@ void __init cmp_smp_setup(void) if (amon_cpu_avail(i)) { set_cpu_possible(i, true); __cpu_number_map[i] = ++ncpu; - __cpu_logical_map[ncpu] = i; + __cpu_logical_map[ncpu] = i; } } diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 2defa2b..bfede06 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -71,7 +71,7 @@ static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0, /* Record this as available CPU */ set_cpu_possible(tc, true); __cpu_number_map[tc] = ++ncpu; - __cpu_logical_map[ncpu] = tc; + __cpu_logical_map[ncpu] = tc; } /* Disable multi-threading with TC's */ @@ -215,7 +215,7 @@ static void __cpuinit vsmp_boot_secondary(int cpu, struct task_struct *idle) write_tc_gpr_gp((unsigned long)gp); flush_icache_range((unsigned long)gp, - (unsigned long)(gp + sizeof(struct thread_info))); + (unsigned long)(gp + sizeof(struct thread_info))); /* finally out of configuration and into chaos */ clear_c0_mvpcontrol(MVPCONTROL_VPC); diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S index 20938a4..76016ac 100644 --- a/arch/mips/kernel/smtc-asm.S +++ b/arch/mips/kernel/smtc-asm.S @@ -65,7 +65,7 @@ FEXPORT(__smtc_ipi_vector) 1: /* * The IPI sender has put some information on the anticipated - * kernel stack frame. If we were in user mode, this will be + * kernel stack frame. If we were in user mode, this will be * built above the saved kernel SP. If we were already in the * kernel, it will be built above the current CPU SP. * diff --git a/arch/mips/kernel/smtc-proc.c b/arch/mips/kernel/smtc-proc.c index 145771c..aee7c81 100644 --- a/arch/mips/kernel/smtc-proc.c +++ b/arch/mips/kernel/smtc-proc.c @@ -35,7 +35,7 @@ static struct proc_dir_entry *smtc_stats; atomic_t smtc_fpu_recoveries; static int proc_read_smtc(char *page, char **start, off_t off, - int count, int *eof, void *data) + int count, int *eof, void *data) { int totalen = 0; int len; @@ -68,7 +68,7 @@ static int proc_read_smtc(char *page, char **start, off_t off, page += len; } len = sprintf(page, "%d Recoveries of \"stolen\" FPU\n", - atomic_read(&smtc_fpu_recoveries)); + atomic_read(&smtc_fpu_recoveries)); totalen += len; page += len; @@ -87,5 +87,5 @@ void init_smtc_stats(void) atomic_set(&smtc_fpu_recoveries, 0); smtc_stats = create_proc_read_entry("smtc", 0444, NULL, - proc_read_smtc, NULL); + proc_read_smtc, NULL); } diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 1d47843..7186222 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -41,6 +41,7 @@ #include <asm/addrspace.h> #include <asm/smtc.h> #include <asm/smtc_proc.h> +#include <asm/setup.h> /* * SMTC Kernel needs to manipulate low-level CPU interrupt mask @@ -235,7 +236,7 @@ static void smtc_configure_tlb(void) mips_ihb(); /* No need to un-Halt - that happens later anyway */ for (i=0; i < vpes; i++) { - write_tc_c0_tcbind(i); + write_tc_c0_tcbind(i); /* * To be 100% sure we're really getting the right * information, we exit the configuration state @@ -286,7 +287,7 @@ static void smtc_configure_tlb(void) /* * Incrementally build the CPU map out of constituent MIPS MT cores, - * using the specified available VPEs and TCs. Plaform code needs + * using the specified available VPEs and TCs. Plaform code needs * to ensure that each MIPS MT core invokes this routine on reset, * one at a time(!). * @@ -348,7 +349,7 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) { /* * FIXME: Multi-core SMTC hasn't been tested and the - * maximum number of VPEs may change. + * maximum number of VPEs may change. */ cp1contexts[0] = smtc_nconf1[0] - 1; cp1contexts[1] = smtc_nconf1[1]; @@ -761,9 +762,9 @@ void smtc_forward_irq(struct irq_data *d) * mask has been purged of bits corresponding to nonexistent and * offline "CPUs", and to TCs bound to VPEs other than the VPE * connected to the physical interrupt input for the interrupt - * in question. Otherwise we have a nasty problem with interrupt + * in question. Otherwise we have a nasty problem with interrupt * mask management. This is best handled in non-performance-critical - * platform IRQ affinity setting code, to minimize interrupt-time + * platform IRQ affinity setting code, to minimize interrupt-time * checks. */ @@ -899,10 +900,10 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) mips_ihb(); /* - * Inspect TCStatus - if IXMT is set, we have to queue + * Inspect TCStatus - if IXMT is set, we have to queue * a message. Otherwise, we set up the "interrupt" * of the other TC - */ + */ tcstatus = read_tc_c0_tcstatus(); if ((tcstatus & TCSTATUS_IXMT) != 0) { @@ -964,7 +965,7 @@ static void post_direct_ipi(int cpu, struct smtc_ipi *pipi) * CU bit of Status is indicator that TC was * already running on a kernel stack... */ - if (tcstatus & ST0_CU0) { + if (tcstatus & ST0_CU0) { /* Note that this "- 1" is pointer arithmetic */ kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1; } else { @@ -1288,7 +1289,7 @@ void smtc_idle_loop_hook(void) for (tc = 0; tc < hook_ntcs; tc++) { tcnoprog[tc] = 0; clock_hang_reported[tc] = 0; - } + } for (vpe = 0; vpe < 2; vpe++) for (im = 0; im < 8; im++) imstuckcount[vpe][im] = 0; @@ -1485,7 +1486,7 @@ static int halt_state_save[NR_CPUS]; /* * To really, really be sure that nothing is being done - * by other TCs, halt them all. This code assumes that + * by other TCs, halt them all. This code assumes that * a DVPE has already been done, so while their Halted * state is theoretically architecturally unstable, in * practice, it's not going to change while we're looking diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 7f1eca3..1ff43d5 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -25,7 +25,7 @@ static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0); static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0); static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0); -#define COUNTON 100 +#define COUNTON 100 #define NR_LOOPS 5 void __cpuinit synchronise_count_master(int cpu) diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index b32466a..b79d13f 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -41,9 +41,9 @@ /* * For historic reasons the pipe(2) syscall on MIPS has an unusual calling - * convention. It returns results in registers $v0 / $v1 which means there + * convention. It returns results in registers $v0 / $v1 which means there * is no need for it to do verify the validity of a userspace pointer - * argument. Historically that used to be expensive in Linux. These days + * argument. Historically that used to be expensive in Linux. These days * the performance advantage is negligible. */ asmlinkage int sysm_pipe(void) diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 99d73b7..9d686bf 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -5,8 +5,8 @@ * * Common time service routines for MIPS machines. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -62,8 +62,8 @@ EXPORT_SYMBOL(perf_irq); * time_init() - it does the following things. * * 1) plat_time_init() - - * a) (optional) set up RTC routines, - * b) (optional) calibrate and set the mips_hpt_frequency + * a) (optional) set up RTC routines, + * b) (optional) calibrate and set the mips_hpt_frequency * (only needed if you intended to use cpu counter as timer interrupt * source) * 2) calculate a couple of cached variables for later usage @@ -75,7 +75,7 @@ unsigned int mips_hpt_frequency; * This function exists in order to cause an error due to a duplicate * definition if platform code should have its own implementation. The hook * to use instead is plat_time_init. plat_time_init does not receive the - * irqaction pointer argument anymore. This is because any function which + * irqaction pointer argument anymore. This is because any function which * initializes an interrupt timer now takes care of its own request_irq rsp. * setup_irq calls and each clock_event_device should use its own * struct irqrequest. @@ -93,7 +93,7 @@ static __init int cpu_has_mfc0_count_bug(void) case CPU_R4000MC: /* * V3.0 is documented as suffering from the mfc0 from count bug. - * Afaik this is the last version of the R4000. Later versions + * Afaik this is the last version of the R4000. Later versions * were marketed as R4400. */ return 1; diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 9007966..a200b5b 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -164,7 +164,7 @@ static void show_stacktrace(struct task_struct *task, i = 0; while ((unsigned long) sp & (PAGE_SIZE - 1)) { if (i && ((i % (64 / field)) == 0)) - printk("\n "); + printk("\n "); if (i > 39) { printk(" ..."); break; @@ -279,7 +279,7 @@ static void __show_regs(const struct pt_regs *regs) printk("ra : %0*lx %pS\n", field, regs->regs[31], (void *) regs->regs[31]); - printk("Status: %08x ", (uint32_t) regs->cp0_status); + printk("Status: %08x ", (uint32_t) regs->cp0_status); if (current_cpu_data.isa_level == MIPS_CPU_ISA_I) { if (regs->cp0_status & ST0_KUO) @@ -441,7 +441,7 @@ asmlinkage void do_be(struct pt_regs *regs) int data = regs->cp0_cause & 4; int action = MIPS_BE_FATAL; - /* XXX For now. Fixme, this searches the wrong table ... */ + /* XXX For now. Fixme, this searches the wrong table ... */ if (data && !user_mode(regs)) fixup = search_dbe_tables(exception_epc(regs)); @@ -518,7 +518,7 @@ static inline int simulate_ll(struct pt_regs *regs, unsigned int opcode) offset >>= 16; vaddr = (unsigned long __user *) - ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset); + ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset); if ((unsigned long)vaddr & 3) return SIGBUS; @@ -558,7 +558,7 @@ static inline int simulate_sc(struct pt_regs *regs, unsigned int opcode) offset >>= 16; vaddr = (unsigned long __user *) - ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset); + ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset); reg = (opcode & RT) >> 16; if ((unsigned long)vaddr & 3) @@ -739,7 +739,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X; /* Restore the hardware register state */ - own_fpu(1); /* Using the FPU again. */ + own_fpu(1); /* Using the FPU again. */ /* If something went wrong, signal */ process_fpemu_return(sig, fault_addr); @@ -966,7 +966,7 @@ int cu2_notifier_call_chain(unsigned long val, void *v) } static int default_cu2_call(struct notifier_block *nfb, unsigned long action, - void *data) + void *data) { struct pt_regs *regs = data; @@ -974,7 +974,7 @@ static int default_cu2_call(struct notifier_block *nfb, unsigned long action, default: die_if_kernel("Unhandled kernel unaligned access or invalid " "instruction", regs); - /* Fall through */ + /* Fall through */ case CU2_EXCEPTION: force_sig(SIGILL, current); @@ -1029,10 +1029,10 @@ asmlinkage void do_cpu(struct pt_regs *regs) /* * Old (MIPS I and MIPS II) processors will set this code * for COP1X opcode instructions that replaced the original - * COP3 space. We don't limit COP1 space instructions in + * COP3 space. We don't limit COP1 space instructions in * the emulator according to the CPU ISA, so we want to * treat COP1X instructions consistently regardless of which - * code the CPU chose. Therefore we redirect this trap to + * code the CPU chose. Therefore we redirect this trap to * the FP emulator too. * * Then some newer FPU-less processors use this code @@ -1044,9 +1044,9 @@ asmlinkage void do_cpu(struct pt_regs *regs) /* Fall through. */ case 1: - if (used_math()) /* Using the FPU again. */ + if (used_math()) /* Using the FPU again. */ own_fpu(1); - else { /* First time FPU user. */ + else { /* First time FPU user. */ init_fpu(); set_used_math(); } @@ -1114,7 +1114,7 @@ asmlinkage void do_mcheck(struct pt_regs *regs) show_regs(regs); if (multi_match) { - printk("Index : %0x\n", read_c0_index()); + printk("Index : %0x\n", read_c0_index()); printk("Pagemask: %0x\n", read_c0_pagemask()); printk("EntryHi : %0*lx\n", field, read_c0_entryhi()); printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0()); @@ -1181,7 +1181,7 @@ asmlinkage void do_dsp(struct pt_regs *regs) asmlinkage void do_reserved(struct pt_regs *regs) { /* - * Game over - no way to handle this if it ever occurs. Most probably + * Game over - no way to handle this if it ever occurs. Most probably * caused by a new unknown cpu type or after another deadly * hard/software error. */ @@ -1705,7 +1705,7 @@ void __init trap_init(void) #if defined(CONFIG_KGDB) if (kgdb_early_setup) - return; /* Already done */ + return; /* Already done */ #endif if (cpu_has_veic || cpu_has_vint) { @@ -1799,7 +1799,7 @@ void __init trap_init(void) * The R6000 is the only R-series CPU that features a machine * check exception (similar to the R4000 cache error) and * unaligned ldc1/sdc1 exception. The handlers have not been - * written yet. Well, anyway there is no R6000 machine on the + * written yet. Well, anyway there is no R6000 machine on the * current list of targets for Linux/MIPS. * (Duh, crap, there is someone with a triple R6k machine) */ diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 9c58bdf..6087a54 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -21,11 +21,11 @@ * * For now I enable fixing of address errors by default to make life easier. * I however intend to disable this somewhen in the future when the alignment - * problems with user programs have been fixed. For programmers this is the + * problems with user programs have been fixed. For programmers this is the * right way to go. * * Fixing address errors is a per process option. The option is inherited - * across fork(2) and execve(2) calls. If you really want to use the + * across fork(2) and execve(2) calls. If you really want to use the * option in your user programs - I discourage the use of the software * emulation strongly - use the following code in your userland stuff: * @@ -43,34 +43,34 @@ * #include <sys/sysmips.h> * * struct foo { - * unsigned char bar[8]; + * unsigned char bar[8]; * }; * * main(int argc, char *argv[]) * { - * struct foo x = {0, 1, 2, 3, 4, 5, 6, 7}; - * unsigned int *p = (unsigned int *) (x.bar + 3); - * int i; + * struct foo x = {0, 1, 2, 3, 4, 5, 6, 7}; + * unsigned int *p = (unsigned int *) (x.bar + 3); + * int i; * - * if (argc > 1) - * sysmips(MIPS_FIXADE, atoi(argv[1])); + * if (argc > 1) + * sysmips(MIPS_FIXADE, atoi(argv[1])); * - * printf("*p = %08lx\n", *p); + * printf("*p = %08lx\n", *p); * - * *p = 0xdeadface; + * *p = 0xdeadface; * - * for(i = 0; i <= 7; i++) - * printf("%02x ", x.bar[i]); - * printf("\n"); + * for(i = 0; i <= 7; i++) + * printf("%02x ", x.bar[i]); + * printf("\n"); * } * * Coprocessor loads are not supported; I think this case is unimportant * in the practice. * * TODO: Handle ndc (attempted store to doubleword in uncached memory) - * exception for the R6000. - * A store crossing a page boundary might be executed only partially. - * Undo the partial store in this case. + * exception for the R6000. + * A store crossing a page boundary might be executed only partially. + * Undo the partial store in this case. */ #include <linux/mm.h> #include <linux/signal.h> @@ -86,7 +86,7 @@ #include <asm/inst.h> #include <asm/uaccess.h> -#define STR(x) __STR(x) +#define STR(x) __STR(x) #define __STR(x) #x enum { diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 0a4336b..05826d2 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -22,12 +22,12 @@ PHDRS { #ifdef CONFIG_32BIT #ifdef CONFIG_CPU_LITTLE_ENDIAN - jiffies = jiffies_64; + jiffies = jiffies_64; #else - jiffies = jiffies_64 + 4; + jiffies = jiffies_64 + 4; #endif #else - jiffies = jiffies_64; + jiffies = jiffies_64; #endif SECTIONS @@ -139,7 +139,7 @@ SECTIONS /* * Force .bss to 64K alignment so that .bss..swapper_pg_dir - * gets that alignment. .sbss should be empty, so there will be + * gets that alignment. .sbss should be empty, so there will be * no holes after __init_end. */ BSS_SECTION(0, 0x10000, 0) diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 2993365..1765bab 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -254,7 +254,7 @@ static void __maybe_unused dump_mtregs(void) val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT); } -/* Find some VPE program space */ +/* Find some VPE program space */ static void *alloc_progmem(unsigned long len) { void *addr; @@ -292,7 +292,7 @@ static long get_offset(unsigned long *size, Elf_Shdr * sechdr) } /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld - might -- code, read-only data, read-write data, small data. Tally + might -- code, read-only data, read-write data, small data. Tally sizes, and place the offsets into sh_entsize fields: high bit means it belongs in init. */ static void layout_sections(struct module *mod, const Elf_Ehdr * hdr, @@ -386,7 +386,7 @@ static int apply_r_mips_pc16(struct module *me, uint32_t *location, if( (rel > 32768) || (rel < -32768) ) { printk(KERN_DEBUG "VPE loader: " - "apply_r_mips_pc16: relative address out of range 0x%x\n", rel); + "apply_r_mips_pc16: relative address out of range 0x%x\n", rel); return -ENOEXEC; } @@ -458,7 +458,7 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, Elf32_Addr val, vallo; struct mips_hi16 *l, *next; - /* Sign extend the addend we extract from the lo insn. */ + /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; if (mips_hi16_list != NULL) { @@ -470,7 +470,7 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, /* * The value for the HI16 had best be the same. */ - if (v != l->value) { + if (v != l->value) { printk(KERN_DEBUG "VPE loader: " "apply_r_mips_lo16/hi16: \t" "inconsistent value information\n"); @@ -505,7 +505,7 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location, } /* - * Ok, we're done with the HI16 relocs. Now deal with the LO16. + * Ok, we're done with the HI16 relocs. Now deal with the LO16. */ val = v + vallo; insnlo = (insnlo & ~0xffff) | (val & 0xffff); @@ -579,7 +579,7 @@ static int apply_relocations(Elf32_Shdr *sechdrs, res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v); if( res ) { char *r = rstrs[ELF32_R_TYPE(r_info)]; - printk(KERN_WARNING "VPE loader: .text+0x%x " + printk(KERN_WARNING "VPE loader: .text+0x%x " "relocation type %s for symbol \"%s\" failed\n", rel[i].r_offset, r ? r : "UNKNOWN", strtab + sym->st_name); @@ -697,18 +697,7 @@ static int vpe_run(struct vpe * v) dmt_flag = dmt(); vpeflags = dvpe(); - if (!list_empty(&v->tc)) { - if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { - evpe(vpeflags); - emt(dmt_flag); - local_irq_restore(flags); - - printk(KERN_WARNING - "VPE loader: TC %d is already in use.\n", - v->tc->index); - return -ENOEXEC; - } - } else { + if (list_empty(&v->tc)) { evpe(vpeflags); emt(dmt_flag); local_irq_restore(flags); @@ -720,6 +709,8 @@ static int vpe_run(struct vpe * v) return -ENOEXEC; } + t = list_first_entry(&v->tc, struct tc, tc); + /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); @@ -772,7 +763,7 @@ static int vpe_run(struct vpe * v) /* Set up the XTC bit in vpeconf0 to point at our tc */ write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC)) - | (t->index << VPECONF0_XTC_SHIFT)); + | (t->index << VPECONF0_XTC_SHIFT)); back_to_back_c0_hazard(); @@ -926,34 +917,34 @@ static int vpe_elfload(struct vpe * v) secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr); } - /* Fix up syms, so that st_value is a pointer to location. */ - simplify_symbols(sechdrs, symindex, strtab, secstrings, - hdr->e_shnum, &mod); - - /* Now do relocations. */ - for (i = 1; i < hdr->e_shnum; i++) { - const char *strtab = (char *)sechdrs[strindex].sh_addr; - unsigned int info = sechdrs[i].sh_info; - - /* Not a valid relocation section? */ - if (info >= hdr->e_shnum) - continue; - - /* Don't bother with non-allocated sections */ - if (!(sechdrs[info].sh_flags & SHF_ALLOC)) - continue; - - if (sechdrs[i].sh_type == SHT_REL) - err = apply_relocations(sechdrs, strtab, symindex, i, - &mod); - else if (sechdrs[i].sh_type == SHT_RELA) - err = apply_relocate_add(sechdrs, strtab, symindex, i, - &mod); - if (err < 0) - return err; - - } - } else { + /* Fix up syms, so that st_value is a pointer to location. */ + simplify_symbols(sechdrs, symindex, strtab, secstrings, + hdr->e_shnum, &mod); + + /* Now do relocations. */ + for (i = 1; i < hdr->e_shnum; i++) { + const char *strtab = (char *)sechdrs[strindex].sh_addr; + unsigned int info = sechdrs[i].sh_info; + + /* Not a valid relocation section? */ + if (info >= hdr->e_shnum) + continue; + + /* Don't bother with non-allocated sections */ + if (!(sechdrs[info].sh_flags & SHF_ALLOC)) + continue; + + if (sechdrs[i].sh_type == SHT_REL) + err = apply_relocations(sechdrs, strtab, symindex, i, + &mod); + else if (sechdrs[i].sh_type == SHT_RELA) + err = apply_relocate_add(sechdrs, strtab, symindex, i, + &mod); + if (err < 0) + return err; + + } + } else { struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff); for (i = 0; i < hdr->e_phnum; i++) { @@ -968,16 +959,16 @@ static int vpe_elfload(struct vpe * v) } for (i = 0; i < hdr->e_shnum; i++) { - /* Internal symbols and strings. */ - if (sechdrs[i].sh_type == SHT_SYMTAB) { - symindex = i; - strindex = sechdrs[i].sh_link; - strtab = (char *)hdr + sechdrs[strindex].sh_offset; - - /* mark the symtab's address for when we try to find the - magic symbols */ - sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; - } + /* Internal symbols and strings. */ + if (sechdrs[i].sh_type == SHT_SYMTAB) { + symindex = i; + strindex = sechdrs[i].sh_link; + strtab = (char *)hdr + sechdrs[strindex].sh_offset; + + /* mark the symtab's address for when we try to find the + magic symbols */ + sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; + } } } @@ -1049,7 +1040,7 @@ static int getcwd(char *buff, int size) return ret; } -/* checks VPE is unused and gets ready to load program */ +/* checks VPE is unused and gets ready to load program */ static int vpe_open(struct inode *inode, struct file *filp) { enum vpe_state state; @@ -1121,11 +1112,11 @@ static int vpe_release(struct inode *inode, struct file *filp) if (vpe_elfload(v) >= 0) { vpe_run(v); } else { - printk(KERN_WARNING "VPE loader: ELF load failed.\n"); + printk(KERN_WARNING "VPE loader: ELF load failed.\n"); ret = -ENOEXEC; } } else { - printk(KERN_WARNING "VPE loader: only elf files are supported\n"); + printk(KERN_WARNING "VPE loader: only elf files are supported\n"); ret = -ENOEXEC; } diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c index c154069..7726f61 100644 --- a/arch/mips/kernel/watch.c +++ b/arch/mips/kernel/watch.c @@ -12,7 +12,7 @@ #include <asm/watch.h> /* - * Install the watch registers for the current thread. A maximum of + * Install the watch registers for the current thread. A maximum of * four registers are installed although the machine may have more. */ void mips_install_watch_registers(void) @@ -72,7 +72,7 @@ void mips_read_watch_registers(void) } /* - * Disable all watch registers. Although only four registers are + * Disable all watch registers. Although only four registers are * installed, all are cleared to eliminate the possibility of endless * looping in the watch handler. */ diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index ce2f129..3fc2e6d 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -26,13 +26,15 @@ #include "prom.h" /* lantiq socs have 3 static clocks */ -static struct clk cpu_clk_generic[3]; +static struct clk cpu_clk_generic[4]; -void clkdev_add_static(unsigned long cpu, unsigned long fpi, unsigned long io) +void clkdev_add_static(unsigned long cpu, unsigned long fpi, + unsigned long io, unsigned long ppe) { cpu_clk_generic[0].rate = cpu; cpu_clk_generic[1].rate = fpi; cpu_clk_generic[2].rate = io; + cpu_clk_generic[3].rate = ppe; } struct clk *clk_get_cpu(void) @@ -51,6 +53,12 @@ struct clk *clk_get_io(void) return &cpu_clk_generic[2]; } +struct clk *clk_get_ppe(void) +{ + return &cpu_clk_generic[3]; +} +EXPORT_SYMBOL_GPL(clk_get_ppe); + static inline int clk_good(struct clk *clk) { return clk && !IS_ERR(clk); @@ -145,9 +153,9 @@ static inline u32 get_counter_resolution(void) u32 res; __asm__ __volatile__( - ".set push\n" - ".set mips32r2\n" - "rdhwr %0, $3\n" + ".set push\n" + ".set mips32r2\n" + "rdhwr %0, $3\n" ".set pop\n" : "=&r" (res) : /* no input */ diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h index fa67060..77e4bdb 100644 --- a/arch/mips/lantiq/clk.h +++ b/arch/mips/lantiq/clk.h @@ -27,12 +27,15 @@ #define CLOCK_167M 166666667 #define CLOCK_196_608M 196608000 #define CLOCK_200M 200000000 +#define CLOCK_222M 222000000 +#define CLOCK_240M 240000000 #define CLOCK_250M 250000000 #define CLOCK_266M 266666666 #define CLOCK_300M 300000000 #define CLOCK_333M 333333333 #define CLOCK_393M 393215332 #define CLOCK_400M 400000000 +#define CLOCK_450M 450000000 #define CLOCK_500M 500000000 #define CLOCK_600M 600000000 @@ -64,15 +67,17 @@ struct clk { }; extern void clkdev_add_static(unsigned long cpu, unsigned long fpi, - unsigned long io); + unsigned long io, unsigned long ppe); extern unsigned long ltq_danube_cpu_hz(void); extern unsigned long ltq_danube_fpi_hz(void); +extern unsigned long ltq_danube_pp32_hz(void); extern unsigned long ltq_ar9_cpu_hz(void); extern unsigned long ltq_ar9_fpi_hz(void); extern unsigned long ltq_vr9_cpu_hz(void); extern unsigned long ltq_vr9_fpi_hz(void); +extern unsigned long ltq_vr9_pp32_hz(void); #endif diff --git a/arch/mips/lantiq/dts/danube.dtsi b/arch/mips/lantiq/dts/danube.dtsi index 3a4520f..d4c59e0 100644 --- a/arch/mips/lantiq/dts/danube.dtsi +++ b/arch/mips/lantiq/dts/danube.dtsi @@ -97,7 +97,7 @@ compatible = "lantiq,pci-xway"; bus-range = <0x0 0x0>; ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ - 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ reg = <0x7000000 0x8000 /* config space */ 0xE105400 0x400>; /* pci bridge */ }; diff --git a/arch/mips/lantiq/dts/easy50712.dts b/arch/mips/lantiq/dts/easy50712.dts index 68c1731..fac1f5b 100644 --- a/arch/mips/lantiq/dts/easy50712.dts +++ b/arch/mips/lantiq/dts/easy50712.dts @@ -103,7 +103,7 @@ lantiq,bus-clock = <33333333>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < - 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 + 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 >; gpios-reset = <&gpio 21 0>; req-mask = <0x1>; /* GNT1 */ diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c index 2d4ced3..ff4894a 100644 --- a/arch/mips/lantiq/falcon/sysctrl.c +++ b/arch/mips/lantiq/falcon/sysctrl.c @@ -241,9 +241,9 @@ void __init ltq_soc_init(void) /* get our 3 static rates for cpu, fpi and io clocks */ if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV) - clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M); + clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M, 0); else - clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M); + clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M, 0); /* add our clock domains */ clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0); diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index a7935bf..5119487 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -33,17 +33,10 @@ /* register definitions - external irqs */ #define LTQ_EIU_EXIN_C 0x0000 #define LTQ_EIU_EXIN_INIC 0x0004 +#define LTQ_EIU_EXIN_INC 0x0008 #define LTQ_EIU_EXIN_INEN 0x000C -/* irq numbers used by the external interrupt unit (EIU) */ -#define LTQ_EIU_IR0 (INT_NUM_IM4_IRL0 + 30) -#define LTQ_EIU_IR1 (INT_NUM_IM3_IRL0 + 31) -#define LTQ_EIU_IR2 (INT_NUM_IM1_IRL0 + 26) -#define LTQ_EIU_IR3 INT_NUM_IM1_IRL0 -#define LTQ_EIU_IR4 (INT_NUM_IM1_IRL0 + 1) -#define LTQ_EIU_IR5 (INT_NUM_IM1_IRL0 + 2) -#define LTQ_EIU_IR6 (INT_NUM_IM2_IRL0 + 30) -#define XWAY_EXIN_COUNT 3 +/* number of external interrupts */ #define MAX_EIU 6 /* the performance counter */ @@ -72,20 +65,19 @@ int gic_present; #endif -static unsigned short ltq_eiu_irq[MAX_EIU] = { - LTQ_EIU_IR0, - LTQ_EIU_IR1, - LTQ_EIU_IR2, - LTQ_EIU_IR3, - LTQ_EIU_IR4, - LTQ_EIU_IR5, -}; - static int exin_avail; +static struct resource ltq_eiu_irq[MAX_EIU]; static void __iomem *ltq_icu_membase[MAX_IM]; static void __iomem *ltq_eiu_membase; static struct irq_domain *ltq_domain; +int ltq_eiu_get_irq(int exin) +{ + if (exin < exin_avail) + return ltq_eiu_irq[exin].start; + return -1; +} + void ltq_disable_irq(struct irq_data *d) { u32 ier = LTQ_ICU_IM0_IER; @@ -128,19 +120,65 @@ void ltq_enable_irq(struct irq_data *d) ltq_icu_w32(im, ltq_icu_r32(im, ier) | BIT(offset), ier); } +static int ltq_eiu_settype(struct irq_data *d, unsigned int type) +{ + int i; + + for (i = 0; i < MAX_EIU; i++) { + if (d->hwirq == ltq_eiu_irq[i].start) { + int val = 0; + int edge = 0; + + switch (type) { + case IRQF_TRIGGER_NONE: + break; + case IRQF_TRIGGER_RISING: + val = 1; + edge = 1; + break; + case IRQF_TRIGGER_FALLING: + val = 2; + edge = 1; + break; + case IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING: + val = 3; + edge = 1; + break; + case IRQF_TRIGGER_HIGH: + val = 5; + break; + case IRQF_TRIGGER_LOW: + val = 6; + break; + default: + pr_err("invalid type %d for irq %ld\n", + type, d->hwirq); + return -EINVAL; + } + + if (edge) + irq_set_handler(d->hwirq, handle_edge_irq); + + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) | + (val << (i * 4)), LTQ_EIU_EXIN_C); + } + } + + return 0; +} + static unsigned int ltq_startup_eiu_irq(struct irq_data *d) { int i; ltq_enable_irq(d); for (i = 0; i < MAX_EIU; i++) { - if (d->hwirq == ltq_eiu_irq[i]) { - /* low level - we should really handle set_type */ - ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) | - (0x6 << (i * 4)), LTQ_EIU_EXIN_C); + if (d->hwirq == ltq_eiu_irq[i].start) { + /* by default we are low level triggered */ + ltq_eiu_settype(d, IRQF_TRIGGER_LOW); /* clear all pending */ - ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~BIT(i), - LTQ_EIU_EXIN_INIC); + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INC) & ~BIT(i), + LTQ_EIU_EXIN_INC); /* enable */ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | BIT(i), LTQ_EIU_EXIN_INEN); @@ -157,7 +195,7 @@ static void ltq_shutdown_eiu_irq(struct irq_data *d) ltq_disable_irq(d); for (i = 0; i < MAX_EIU; i++) { - if (d->hwirq == ltq_eiu_irq[i]) { + if (d->hwirq == ltq_eiu_irq[i].start) { /* disable */ ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~BIT(i), LTQ_EIU_EXIN_INEN); @@ -186,6 +224,7 @@ static struct irq_chip ltq_eiu_type = { .irq_ack = ltq_ack_irq, .irq_mask = ltq_disable_irq, .irq_mask_ack = ltq_mask_and_ack_irq, + .irq_set_type = ltq_eiu_settype, }; static void ltq_hw_irqdispatch(int module) @@ -301,7 +340,7 @@ static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) return 0; for (i = 0; i < exin_avail; i++) - if (hw == ltq_eiu_irq[i]) + if (hw == ltq_eiu_irq[i].start) chip = <q_eiu_type; irq_set_chip_and_handler(hw, chip, handle_level_irq); @@ -323,7 +362,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) { struct device_node *eiu_node; struct resource res; - int i; + int i, ret; for (i = 0; i < MAX_IM; i++) { if (of_address_to_resource(node, i, &res)) @@ -340,17 +379,19 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) } /* the external interrupts are optional and xway only */ - eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu"); + eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway"); if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) { /* find out how many external irq sources we have */ - const __be32 *count = of_get_property(node, - "lantiq,count", NULL); + exin_avail = of_irq_count(eiu_node); - if (count) - exin_avail = *count; if (exin_avail > MAX_EIU) exin_avail = MAX_EIU; + ret = of_irq_to_resource_table(eiu_node, + ltq_eiu_irq, exin_avail); + if (ret != exin_avail) + panic("failed to load external irq resources\n"); + if (request_mem_region(res.start, resource_size(&res), res.name) < 0) pr_err("Failed to request eiu memory"); diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h index a3fa1a2..8e07b5f 100644 --- a/arch/mips/lantiq/prom.h +++ b/arch/mips/lantiq/prom.h @@ -10,7 +10,7 @@ #define _LTQ_PROM_H__ #define LTQ_SYS_TYPE_LEN 0x100 -#define LTQ_SYS_REV_LEN 0x10 +#define LTQ_SYS_REV_LEN 0x10 struct ltq_soc_info { unsigned char *name; diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c index 9aa17f7..1ab576d 100644 --- a/arch/mips/lantiq/xway/clk.c +++ b/arch/mips/lantiq/xway/clk.c @@ -53,6 +53,29 @@ unsigned long ltq_danube_cpu_hz(void) } } +unsigned long ltq_danube_pp32_hz(void) +{ + unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 7) & 3; + unsigned long clk; + + switch (clksys) { + case 1: + clk = CLOCK_240M; + break; + case 2: + clk = CLOCK_222M; + break; + case 3: + clk = CLOCK_133M; + break; + default: + clk = CLOCK_266M; + break; + } + + return clk; +} + unsigned long ltq_ar9_sys_hz(void) { if (((ltq_cgu_r32(CGU_SYS) >> 3) & 0x3) == 0x2) @@ -149,3 +172,23 @@ unsigned long ltq_vr9_fpi_hz(void) return clk; } + +unsigned long ltq_vr9_pp32_hz(void) +{ + unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 3; + unsigned long clk; + + switch (clksys) { + case 1: + clk = CLOCK_450M; + break; + case 2: + clk = CLOCK_300M; + break; + default: + clk = CLOCK_500M; + break; + } + + return clk; +} diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index 544dbb7..1fa0f17 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -78,10 +78,19 @@ static struct ltq_xrx200_gphy_reset { /* reset and boot a gphy. these phys only exist on xrx200 SoC */ int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr) { + struct clk *clk; + if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) { dev_err(dev, "this SoC has no GPHY\n"); return -EINVAL; } + + clk = clk_get_sys("1f203000.rcu", "gphy"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clk_enable(clk); + if (id > 1) { dev_err(dev, "%u is an invalid gphy id\n", id); return -EINVAL; diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index 3925e66..c24924f 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -305,7 +305,7 @@ void __init ltq_soc_init(void) /* check if all the core register ranges are available */ if (!np_pmu || !np_cgu || !np_ebu) - panic("Failed to load core nodess from devicetree"); + panic("Failed to load core nodes from devicetree"); if (of_address_to_resource(np_pmu, 0, &res_pmu) || of_address_to_resource(np_cgu, 0, &res_cgu) || @@ -356,14 +356,16 @@ void __init ltq_soc_init(void) if (of_machine_is_compatible("lantiq,ase")) { if (ltq_cgu_r32(CGU_SYS) & (1 << 5)) - clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M); + clkdev_add_static(CLOCK_266M, CLOCK_133M, + CLOCK_133M, CLOCK_266M); else - clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M); + clkdev_add_static(CLOCK_133M, CLOCK_133M, + CLOCK_133M, CLOCK_133M); clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY), clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY); } else if (of_machine_is_compatible("lantiq,vr9")) { clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(), - ltq_vr9_fpi_hz()); + ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz()); clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY); clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK); clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI); @@ -374,12 +376,13 @@ void __init ltq_soc_init(void) PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | PMU_PPE_QSB | PMU_PPE_TOP); + clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY); } else if (of_machine_is_compatible("lantiq,ar9")) { clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), - ltq_ar9_fpi_hz()); + ltq_ar9_fpi_hz(), CLOCK_250M); clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH); } else { clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(), - ltq_danube_fpi_hz()); + ltq_danube_fpi_hz(), ltq_danube_pp32_hz()); } } diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile index 9cc4e4d..869bd3b 100644 --- a/arch/mips/lasat/Makefile +++ b/arch/mips/lasat/Makefile @@ -2,7 +2,7 @@ # Makefile for the LASAT specific kernel interface routines under Linux. # -obj-y += reset.o setup.o prom.o lasat_board.o \ +obj-y += reset.o setup.o prom.o lasat_board.o \ at93c.o interrupt.o serial.o obj-$(CONFIG_LASAT_SYSCTL) += sysctl.o diff --git a/arch/mips/lasat/ds1603.h b/arch/mips/lasat/ds1603.h index 2da3704..3e718b1 100644 --- a/arch/mips/lasat/ds1603.h +++ b/arch/mips/lasat/ds1603.h @@ -25,7 +25,7 @@ void ds1603_enable(void); void ds1603_disable(void); void ds1603_init(struct ds_defs *); -#define TRIMMER_DEFAULT 3 +#define TRIMMER_DEFAULT 3 #define TRIMMER_DISABLE_RTC 0 #endif diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile index 460626b..dfb509d 100644 --- a/arch/mips/lasat/image/Makefile +++ b/arch/mips/lasat/image/Makefile @@ -28,7 +28,7 @@ $(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE) OBJECTS = head.o kImage.o -rom.sw: $(obj)/rom.sw +rom.sw: $(obj)/rom.sw rom.bin: $(obj)/rom.bin $(obj)/rom.sw: $(obj)/rom.bin diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S index e0ecda9..41babbe 100644 --- a/arch/mips/lasat/image/head.S +++ b/arch/mips/lasat/image/head.S @@ -7,7 +7,7 @@ /* Magic words identifying a software image */ .word LASAT_K_MAGIC0_VAL - .word LASAT_K_MAGIC1_VAL + .word LASAT_K_MAGIC1_VAL /* Image header version */ .word 0x00000002 diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c index d3d04c3..7eb3348 100644 --- a/arch/mips/lasat/picvue.c +++ b/arch/mips/lasat/picvue.c @@ -163,12 +163,12 @@ int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]) } #define FUNC_SET_CMD 0x20 -#define EIGHT_BYTE (1 << 4) -#define FOUR_BYTE 0 -#define TWO_LINES (1 << 3) -#define ONE_LINE 0 -#define LARGE_FONT (1 << 2) -#define SMALL_FONT 0 +#define EIGHT_BYTE (1 << 4) +#define FOUR_BYTE 0 +#define TWO_LINES (1 << 3) +#define ONE_LINE 0 +#define LARGE_FONT (1 << 2) +#define SMALL_FONT 0 static void pvc_funcset(u8 cmd) { @@ -177,9 +177,9 @@ static void pvc_funcset(u8 cmd) } #define ENTRYMODE_CMD 0x4 -#define AUTO_INC (1 << 1) -#define AUTO_DEC 0 -#define CURSOR_FOLLOWS_DISP (1 << 0) +#define AUTO_INC (1 << 1) +#define AUTO_DEC 0 +#define CURSOR_FOLLOWS_DISP (1 << 0) static void pvc_entrymode(u8 cmd) { @@ -188,20 +188,20 @@ static void pvc_entrymode(u8 cmd) } #define DISP_CNT_CMD 0x08 -#define DISP_OFF 0 -#define DISP_ON (1 << 2) -#define CUR_ON (1 << 1) -#define CUR_BLINK (1 << 0) +#define DISP_OFF 0 +#define DISP_ON (1 << 2) +#define CUR_ON (1 << 1) +#define CUR_BLINK (1 << 0) void pvc_dispcnt(u8 cmd) { pvc_write(DISP_CNT_CMD | (cmd & (DISP_ON|CUR_ON|CUR_BLINK)), MODE_INST); } #define MOVE_CMD 0x10 -#define DISPLAY (1 << 3) -#define CURSOR 0 -#define RIGHT (1 << 2) -#define LEFT 0 +#define DISPLAY (1 << 3) +#define CURSOR 0 +#define RIGHT (1 << 2) +#define LEFT 0 void pvc_move(u8 cmd) { pvc_write(MOVE_CMD | (cmd & (DISPLAY|RIGHT)), MODE_INST); diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h index 2f07577..d0119fc 100644 --- a/arch/mips/lasat/picvue.h +++ b/arch/mips/lasat/picvue.h @@ -29,16 +29,16 @@ void pvc_dump_string(const unsigned char *str); int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]); void pvc_dispcnt(u8 cmd); -#define DISP_OFF 0 -#define DISP_ON (1 << 2) -#define CUR_ON (1 << 1) -#define CUR_BLINK (1 << 0) +#define DISP_OFF 0 +#define DISP_ON (1 << 2) +#define CUR_ON (1 << 1) +#define CUR_BLINK (1 << 0) void pvc_move(u8 cmd); -#define DISPLAY (1 << 3) -#define CURSOR 0 -#define RIGHT (1 << 2) -#define LEFT 0 +#define DISPLAY (1 << 3) +#define CURSOR 0 +#define RIGHT (1 << 2) +#define LEFT 0 void pvc_clear(void); void pvc_home(void); diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c index 5bcb6e8..2e5fbed 100644 --- a/arch/mips/lasat/serial.c +++ b/arch/mips/lasat/serial.c @@ -1,7 +1,7 @@ /* * Registration of Lasat UART platform device. * - * Copyright (C) 2007 Brian Murphy <brian@murphy.dk> + * Copyright (C) 2007 Brian Murphy <brian@murphy.dk> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index d87ffd0..f27694f 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -134,8 +134,8 @@ int proc_lasat_ip(ctl_table *table, int write, } else { ip = *(unsigned int *)(table->data); sprintf(ipbuf, "%d.%d.%d.%d", - (ip) & 0xff, - (ip >> 8) & 0xff, + (ip) & 0xff, + (ip >> 8) & 0xff, (ip >> 16) & 0xff, (ip >> 24) & 0xff); len = strlen(ipbuf); diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c index 239a9c9..81f1dcf 100644 --- a/arch/mips/lib/bitops.c +++ b/arch/mips/lib/bitops.c @@ -56,7 +56,7 @@ EXPORT_SYMBOL(__mips_clear_bit); /** - * __mips_change_bit - Toggle a bit in memory. This is called by change_bit() + * __mips_change_bit - Toggle a bit in memory. This is called by change_bit() * if it cannot find a faster solution. * @nr: Bit to change * @addr: Address to start counting from @@ -155,7 +155,7 @@ EXPORT_SYMBOL(__mips_test_and_clear_bit); /** - * __mips_test_and_change_bit - Change a bit and return its old value. This is + * __mips_test_and_change_bit - Change a bit and return its old value. This is * called by test_and_change_bit() if it cannot find a faster solution. * @nr: Bit to change * @addr: Address to count from diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 6b876ca..507147a 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -67,8 +67,8 @@ #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \ LOAD _t0, (offset + UNIT(0))(src); \ LOAD _t1, (offset + UNIT(1))(src); \ - LOAD _t2, (offset + UNIT(2))(src); \ - LOAD _t3, (offset + UNIT(3))(src); \ + LOAD _t2, (offset + UNIT(2))(src); \ + LOAD _t3, (offset + UNIT(3))(src); \ ADDC(sum, _t0); \ ADDC(sum, _t1); \ ADDC(sum, _t2); \ @@ -285,7 +285,7 @@ LEAF(csum_partial) 1: #endif .set reorder - /* Add the passed partial csum. */ + /* Add the passed partial csum. */ ADDC32(sum, a2) jr ra .set noreorder @@ -298,7 +298,7 @@ LEAF(csum_partial) * csum_partial_copy_nocheck(src, dst, len, sum) * __csum_partial_copy_user(src, dst, len, sum, errp) * - * See "Spec" in memcpy.S for details. Unlike __copy_user, all + * See "Spec" in memcpy.S for details. Unlike __copy_user, all * function in this file use the standard calling convention. */ @@ -371,16 +371,16 @@ LEAF(csum_partial) #ifdef CONFIG_CPU_LITTLE_ENDIAN #define LDFIRST LOADR -#define LDREST LOADL +#define LDREST LOADL #define STFIRST STORER -#define STREST STOREL +#define STREST STOREL #define SHIFT_DISCARD SLLV #define SHIFT_DISCARD_REVERT SRLV #else #define LDFIRST LOADL -#define LDREST LOADR +#define LDREST LOADR #define STFIRST STOREL -#define STREST STORER +#define STREST STORER #define SHIFT_DISCARD SRLV #define SHIFT_DISCARD_REVERT SLLV #endif @@ -430,7 +430,7 @@ FEXPORT(csum_partial_copy_nocheck) * src and dst are aligned; need to compute rem */ .Lboth_aligned: - SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter + SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter beqz t0, .Lcleanup_both_aligned # len < 8*NBYTES nop SUB len, 8*NBYTES # subtract here for bgez loop @@ -518,7 +518,7 @@ EXC( STORE t0, 0(dst), .Ls_exc) /* * src and dst are aligned, need to copy rem bytes (rem < NBYTES) * A loop would do only a byte at a time with possible branch - * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE + * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE * because can't assume read-access to dst. Instead, use * STREST dst, which doesn't require read access to dst. * @@ -532,7 +532,7 @@ EXC( STORE t0, 0(dst), .Ls_exc) li bits, 8*NBYTES SLL rem, len, 3 # rem = number of bits to keep EXC( LOAD t0, 0(src), .Ll_exc) - SUB bits, bits, rem # bits = number of bits to discard + SUB bits, bits, rem # bits = number of bits to discard SHIFT_DISCARD t0, t0, bits EXC( STREST t0, -1(t1), .Ls_exc) SHIFT_DISCARD_REVERT t0, t0, bits @@ -551,7 +551,7 @@ EXC( STREST t0, -1(t1), .Ls_exc) * Set match = (src and dst have same alignment) */ #define match rem -EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc) +EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc) ADD t2, zero, NBYTES EXC( LDREST t3, REST(0)(src), .Ll_exc_copy) SUB t2, t2, t1 # t2 = number of bytes copied @@ -568,9 +568,9 @@ EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) ADD src, src, t2 .Lsrc_unaligned_dst_aligned: - SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter + SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter beqz t0, .Lcleanup_src_unaligned - and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES + and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES 1: /* * Avoid consecutive LD*'s to the same register since some mips @@ -578,13 +578,13 @@ EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) * It's OK to load FIRST(N+1) before REST(N) because the two addresses * are to the same unit (unless src is aligned, but it's not). */ -EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) -EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy) - SUB len, len, 4*NBYTES +EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) +EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy) + SUB len, len, 4*NBYTES EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) EXC( LDREST t1, REST(1)(src), .Ll_exc_copy) -EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy) -EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy) +EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy) +EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy) EXC( LDREST t2, REST(2)(src), .Ll_exc_copy) EXC( LDREST t3, REST(3)(src), .Ll_exc_copy) ADD src, src, 4*NBYTES @@ -634,7 +634,7 @@ EXC( STORE t0, 0(dst), .Ls_exc) #define SHIFT_INC -8 #endif move t2, zero # partial word - li t3, SHIFT_START # shift + li t3, SHIFT_START # shift /* use .Ll_exc_copy here to return correct sum on fault */ #define COPY_BYTE(N) \ EXC( lbu t0, N(src), .Ll_exc_copy); \ @@ -642,7 +642,7 @@ EXC( lbu t0, N(src), .Ll_exc_copy); \ EXC( sb t0, N(dst), .Ls_exc); \ SLLV t0, t0, t3; \ addu t3, SHIFT_INC; \ - beqz len, .Lcopy_bytes_done; \ + beqz len, .Lcopy_bytes_done; \ or t2, t0 COPY_BYTE(0) diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c index 288f795..44713af 100644 --- a/arch/mips/lib/delay.c +++ b/arch/mips/lib/delay.c @@ -36,7 +36,7 @@ EXPORT_SYMBOL(__delay); * Division by multiplication: you don't have to worry about * loss of precision. * - * Use only for very small delays ( < 1 msec). Should probably use a + * Use only for very small delays ( < 1 msec). Should probably use a * lookup table, really, as the multiplications take much too long with * short delays. This is a "reasonable" implementation, though (and the * first constant multiplications gets optimized away if the delay is diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index a99c1d3..32b9f21 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -63,7 +63,7 @@ static void dump_tlb(int first, int last) tlb_read(); BARRIER(); pagemask = read_c0_pagemask(); - entryhi = read_c0_entryhi(); + entryhi = read_c0_entryhi(); entrylo0 = read_c0_entrylo0(); entrylo1 = read_c0_entrylo1(); diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S index 65192c0..c5c40da 100644 --- a/arch/mips/lib/memcpy.S +++ b/arch/mips/lib/memcpy.S @@ -156,15 +156,15 @@ #ifdef CONFIG_CPU_LITTLE_ENDIAN #define LDFIRST LOADR -#define LDREST LOADL +#define LDREST LOADL #define STFIRST STORER -#define STREST STOREL +#define STREST STOREL #define SHIFT_DISCARD SLLV #else #define LDFIRST LOADL -#define LDREST LOADR +#define LDREST LOADR #define STFIRST STOREL -#define STREST STORER +#define STREST STORER #define SHIFT_DISCARD SRLV #endif @@ -235,7 +235,7 @@ __copy_user_common: * src and dst are aligned; need to compute rem */ .Lboth_aligned: - SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter + SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter beqz t0, .Lcleanup_both_aligned # len < 8*NBYTES and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES) PREF( 0, 3*32(src) ) @@ -313,7 +313,7 @@ EXC( STORE t0, 0(dst), .Ls_exc_p1u) /* * src and dst are aligned, need to copy rem bytes (rem < NBYTES) * A loop would do only a byte at a time with possible branch - * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE + * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE * because can't assume read-access to dst. Instead, use * STREST dst, which doesn't require read access to dst. * @@ -327,7 +327,7 @@ EXC( STORE t0, 0(dst), .Ls_exc_p1u) li bits, 8*NBYTES SLL rem, len, 3 # rem = number of bits to keep EXC( LOAD t0, 0(src), .Ll_exc) - SUB bits, bits, rem # bits = number of bits to discard + SUB bits, bits, rem # bits = number of bits to discard SHIFT_DISCARD t0, t0, bits EXC( STREST t0, -1(t1), .Ls_exc) jr ra @@ -343,7 +343,7 @@ EXC( STREST t0, -1(t1), .Ls_exc) * Set match = (src and dst have same alignment) */ #define match rem -EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc) +EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc) ADD t2, zero, NBYTES EXC( LDREST t3, REST(0)(src), .Ll_exc_copy) SUB t2, t2, t1 # t2 = number of bytes copied @@ -357,10 +357,10 @@ EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) ADD src, src, t2 .Lsrc_unaligned_dst_aligned: - SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter + SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter PREF( 0, 3*32(src) ) beqz t0, .Lcleanup_src_unaligned - and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES + and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES PREF( 1, 3*32(dst) ) 1: /* @@ -370,13 +370,13 @@ EXC( STFIRST t3, FIRST(0)(dst), .Ls_exc) * are to the same unit (unless src is aligned, but it's not). */ R10KCBARRIER(0(ra)) -EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) -EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy) - SUB len, len, 4*NBYTES +EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc) +EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy) + SUB len, len, 4*NBYTES EXC( LDREST t0, REST(0)(src), .Ll_exc_copy) EXC( LDREST t1, REST(1)(src), .Ll_exc_copy) -EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy) -EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy) +EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy) +EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy) EXC( LDREST t2, REST(2)(src), .Ll_exc_copy) EXC( LDREST t3, REST(3)(src), .Ll_exc_copy) PREF( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed) @@ -388,7 +388,7 @@ EXC( STORE t0, UNIT(0)(dst), .Ls_exc_p4u) EXC( STORE t1, UNIT(1)(dst), .Ls_exc_p3u) EXC( STORE t2, UNIT(2)(dst), .Ls_exc_p2u) EXC( STORE t3, UNIT(3)(dst), .Ls_exc_p1u) - PREF( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed) + PREF( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed) .set reorder /* DADDI_WAR */ ADD dst, dst, 4*NBYTES bne len, rem, 1b @@ -502,7 +502,7 @@ EXC( lb t1, 0(src), .Ll_exc) #define SEXC(n) \ - .set reorder; /* DADDI_WAR */ \ + .set reorder; /* DADDI_WAR */ \ .Ls_exc_p ## n ## u: \ ADD len, len, n*NBYTES; \ jr ra; \ diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S index 606c8a9..053d3b0 100644 --- a/arch/mips/lib/memset.S +++ b/arch/mips/lib/memset.S @@ -21,8 +21,8 @@ #define EX(insn,reg,addr,handler) \ 9: insn reg, addr; \ - .section __ex_table,"a"; \ - PTR 9b, handler; \ + .section __ex_table,"a"; \ + PTR 9b, handler; \ .previous .macro f_fill64 dst, offset, val, fixup diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c index 9cee907..91615c2 100644 --- a/arch/mips/lib/r3k_dump_tlb.c +++ b/arch/mips/lib/r3k_dump_tlb.c @@ -30,7 +30,7 @@ static void dump_tlb(int first, int last) "tlbr\n\t" "nop\n\t" ".set\treorder"); - entryhi = read_c0_entryhi(); + entryhi = read_c0_entryhi(); entrylo0 = read_c0_entrylo0(); /* Unused entries have a virtual address of KSEG0. */ diff --git a/arch/mips/lib/strncpy_user.S b/arch/mips/lib/strncpy_user.S index 7201b2f..bad5394 100644 --- a/arch/mips/lib/strncpy_user.S +++ b/arch/mips/lib/strncpy_user.S @@ -23,7 +23,7 @@ /* * Ugly special case have to check: we might get passed a user space - * pointer which wraps into the kernel space. We don't deal with that. If + * pointer which wraps into the kernel space. We don't deal with that. If * it happens at most some bytes of the exceptions handlers will be copied. */ diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S index 6445716..beea03c 100644 --- a/arch/mips/lib/strnlen_user.S +++ b/arch/mips/lib/strnlen_user.S @@ -21,9 +21,9 @@ * maximum of a1 or 0 in case of error. * * Note: for performance reasons we deliberately accept that a user may - * make strlen_user and strnlen_user access the first few KSEG0 - * bytes. There's nothing secret there. On 64-bit accessing beyond - * the maximum is a tad hairier ... + * make strlen_user and strnlen_user access the first few KSEG0 + * bytes. There's nothing secret there. On 64-bit accessing beyond + * the maximum is a tad hairier ... */ LEAF(__strnlen_user_asm) LONG_L v0, TI_ADDR_LIMIT($28) # pointer ok? diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c index a6d1c77..65e3dfc 100644 --- a/arch/mips/lib/uncached.c +++ b/arch/mips/lib/uncached.c @@ -4,7 +4,7 @@ * for more details. * * Copyright (C) 2005 Thiemo Seufer - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. * Author: Maciej W. Rozycki <macro@mips.com> */ diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile index 2b76cb0..0dc0055 100644 --- a/arch/mips/loongson/Makefile +++ b/arch/mips/loongson/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_MACH_LOONGSON) += common/ # Lemote Fuloong mini-PC (Loongson 2E-based) # -obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ +obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ # # Lemote loongson2f family machines diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c index f27d7cc..cc0e4fd 100644 --- a/arch/mips/loongson/common/bonito-irq.c +++ b/arch/mips/loongson/common/bonito-irq.c @@ -6,9 +6,9 @@ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include <linux/interrupt.h> diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c index 353e1d2..72fed00 100644 --- a/arch/mips/loongson/common/cmdline.c +++ b/arch/mips/loongson/common/cmdline.c @@ -12,8 +12,8 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/cs5536/cs5536_acc.c b/arch/mips/loongson/common/cs5536/cs5536_acc.c index b3fd5ea..ab4d6cc 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_acc.c +++ b/arch/mips/loongson/common/cs5536/cs5536_acc.c @@ -7,8 +7,8 @@ * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c index 5b5cbba..ec2e360 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_ehci.c +++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c @@ -7,8 +7,8 @@ * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c index 681d129..a73414d 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_ide.c +++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c @@ -7,8 +7,8 @@ * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c index 4d9f65a..a6eb2e8 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_isa.c +++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c @@ -7,8 +7,8 @@ * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c index 5d1f48f..c639b9d 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c @@ -9,9 +9,9 @@ * * Reference: AMD Geode(TM) CS5536 Companion Device Data Book * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c index bdedf51..f7c905e 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_ohci.c +++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c @@ -7,8 +7,8 @@ * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson/common/cs5536/cs5536_pci.c index 6dfeab1..81bed9d 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_pci.c +++ b/arch/mips/loongson/common/cs5536/cs5536_pci.c @@ -7,8 +7,8 @@ * Copyright (C) 2009 Lemote, Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c index a71736f..ced461b 100644 --- a/arch/mips/loongson/common/early_printk.c +++ b/arch/mips/loongson/common/early_printk.c @@ -4,9 +4,9 @@ * Copyright (c) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include <linux/serial_reg.h> diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c index d93830a..0a18fcf 100644 --- a/arch/mips/loongson/common/env.c +++ b/arch/mips/loongson/common/env.c @@ -12,8 +12,8 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/gpio.c b/arch/mips/loongson/common/gpio.c index e8a0ffa..2186990 100644 --- a/arch/mips/loongson/common/gpio.c +++ b/arch/mips/loongson/common/gpio.c @@ -1,7 +1,7 @@ /* * STLS2F GPIO Support * - * Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com> + * Copyright (c) 2008 Richard Liu, STMicroelectronics <richard.liu@st.com> * Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com> * * This program is free software; you can redistribute it and/or modify @@ -123,13 +123,13 @@ static void ls2f_gpio_set_value(struct gpio_chip *chip, } static struct gpio_chip ls2f_chip = { - .label = "ls2f", - .direction_input = ls2f_gpio_direction_input, - .get = ls2f_gpio_get_value, - .direction_output = ls2f_gpio_direction_output, - .set = ls2f_gpio_set_value, - .base = 0, - .ngpio = STLS2F_N_GPIO, + .label = "ls2f", + .direction_input = ls2f_gpio_direction_input, + .get = ls2f_gpio_get_value, + .direction_output = ls2f_gpio_direction_output, + .set = ls2f_gpio_set_value, + .base = 0, + .ngpio = STLS2F_N_GPIO, }; static int __init ls2f_gpio_setup(void) diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c index 19d3415..ae7af1f 100644 --- a/arch/mips/loongson/common/init.c +++ b/arch/mips/loongson/common/init.c @@ -2,8 +2,8 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c index 5897471..687003b 100644 --- a/arch/mips/loongson/common/irq.c +++ b/arch/mips/loongson/common/irq.c @@ -2,9 +2,9 @@ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include <linux/delay.h> diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index 2efd5d9..4becd4f 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -4,8 +4,8 @@ * * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -19,15 +19,15 @@ #define MACHTYPE_LEN 50 static const char *system_types[] = { - [MACH_LOONGSON_UNKNOWN] "unknown loongson machine", - [MACH_LEMOTE_FL2E] "lemote-fuloong-2e-box", - [MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box", - [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", - [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", - [MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f", + [MACH_LOONGSON_UNKNOWN] "unknown loongson machine", + [MACH_LEMOTE_FL2E] "lemote-fuloong-2e-box", + [MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box", + [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", + [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", + [MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f", [MACH_LEMOTE_NAS] "lemote-nas-2f", - [MACH_LEMOTE_LL2F] "lemote-lynloong-2f", - [MACH_LOONGSON_END] NULL, + [MACH_LEMOTE_LL2F] "lemote-lynloong-2f", + [MACH_LOONGSON_END] NULL, }; const char *get_system_type(void) diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index 30eba60..8626a42 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -1,6 +1,6 @@ /* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c index 31d8c5e..fa77844 100644 --- a/arch/mips/loongson/common/pci.c +++ b/arch/mips/loongson/common/pci.c @@ -2,9 +2,9 @@ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include <linux/pci.h> @@ -13,25 +13,25 @@ #include <loongson.h> static struct resource loongson_pci_mem_resource = { - .name = "pci memory space", - .start = LOONGSON_PCI_MEM_START, - .end = LOONGSON_PCI_MEM_END, - .flags = IORESOURCE_MEM, + .name = "pci memory space", + .start = LOONGSON_PCI_MEM_START, + .end = LOONGSON_PCI_MEM_END, + .flags = IORESOURCE_MEM, }; static struct resource loongson_pci_io_resource = { - .name = "pci io space", - .start = LOONGSON_PCI_IO_START, - .end = IO_SPACE_LIMIT, - .flags = IORESOURCE_IO, + .name = "pci io space", + .start = LOONGSON_PCI_IO_START, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, }; static struct pci_controller loongson_pci_controller = { - .pci_ops = &loongson_pci_ops, - .io_resource = &loongson_pci_io_resource, - .mem_resource = &loongson_pci_mem_resource, - .mem_offset = 0x00000000UL, - .io_offset = 0x00000000UL, + .pci_ops = &loongson_pci_ops, + .io_resource = &loongson_pci_io_resource, + .mem_resource = &loongson_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, }; static void __init setup_pcimap(void) @@ -42,7 +42,7 @@ static void __init setup_pcimap(void) * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M] * * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 - * [<2G] [384M,448M] [320M,384M] [0M,64M] + * [<2G] [384M,448M] [320M,384M] [0M,64M] */ LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 | LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) | diff --git a/arch/mips/loongson/common/platform.c b/arch/mips/loongson/common/platform.c index 502b059..0ed3832 100644 --- a/arch/mips/loongson/common/platform.c +++ b/arch/mips/loongson/common/platform.c @@ -2,8 +2,8 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c index 9e10d62..35c8c64 100644 --- a/arch/mips/loongson/common/reset.c +++ b/arch/mips/loongson/common/reset.c @@ -1,6 +1,6 @@ /* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * @@ -26,9 +26,9 @@ static inline void loongson_reboot(void) func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4); __asm__ __volatile__( - " .set noat \n" - " jr %[func] \n" - " .set at \n" + " .set noat \n" + " jr %[func] \n" + " .set at \n" : /* No outputs */ : [func] "r" (func)); #endif diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c index 7580873..5f2b78a 100644 --- a/arch/mips/loongson/common/serial.c +++ b/arch/mips/loongson/common/serial.c @@ -39,15 +39,15 @@ } static struct plat_serial8250_port uart8250_data[][2] = { - [MACH_LOONGSON_UNKNOWN] {}, - [MACH_LEMOTE_FL2E] {PORT(4), {} }, - [MACH_LEMOTE_FL2F] {PORT(3), {} }, - [MACH_LEMOTE_ML2F7] {PORT_M(3), {} }, - [MACH_LEMOTE_YL2F89] {PORT_M(3), {} }, - [MACH_DEXXON_GDIUM2F10] {PORT_M(3), {} }, - [MACH_LEMOTE_NAS] {PORT_M(3), {} }, - [MACH_LEMOTE_LL2F] {PORT(3), {} }, - [MACH_LOONGSON_END] {}, + [MACH_LOONGSON_UNKNOWN] {}, + [MACH_LEMOTE_FL2E] {PORT(4), {} }, + [MACH_LEMOTE_FL2F] {PORT(3), {} }, + [MACH_LEMOTE_ML2F7] {PORT_M(3), {} }, + [MACH_LEMOTE_YL2F89] {PORT_M(3), {} }, + [MACH_DEXXON_GDIUM2F10] {PORT_M(3), {} }, + [MACH_LEMOTE_NAS] {PORT_M(3), {} }, + [MACH_LEMOTE_LL2F] {PORT(3), {} }, + [MACH_LOONGSON_END] {}, }; static struct platform_device uart8250_device = { diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c index 27d826b..8223f8a 100644 --- a/arch/mips/loongson/common/setup.c +++ b/arch/mips/loongson/common/setup.c @@ -2,9 +2,9 @@ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include <linux/module.h> diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c index 9fdd01f..262a1f6 100644 --- a/arch/mips/loongson/common/time.c +++ b/arch/mips/loongson/common/time.c @@ -5,9 +5,9 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include <asm/mc146818-time.h> diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c index d69ea54..e192ad0 100644 --- a/arch/mips/loongson/common/uart_base.c +++ b/arch/mips/loongson/common/uart_base.c @@ -2,8 +2,8 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c index 3cf1fef..ef5ec8f 100644 --- a/arch/mips/loongson/fuloong-2e/irq.c +++ b/arch/mips/loongson/fuloong-2e/irq.c @@ -2,9 +2,9 @@ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include <linux/interrupt.h> @@ -48,9 +48,9 @@ static struct irqaction cascade_irqaction = { void __init mach_init_irq(void) { /* init all controller - * 0-15 ------> i8259 interrupt - * 16-23 ------> mips cpu interrupt - * 32-63 ------> bonito irq + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq */ /* most bonito irq should be level triggered */ diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c index bc39ec6..da4d2ae 100644 --- a/arch/mips/loongson/fuloong-2e/reset.c +++ b/arch/mips/loongson/fuloong-2e/reset.c @@ -4,8 +4,8 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h index 1595a21..5a3f186 100644 --- a/arch/mips/loongson/lemote-2f/ec_kb3310b.h +++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h @@ -30,141 +30,141 @@ extern sci_handler yeeloong_report_lid_status; * 2, fill the PORT_LOW as EC register low part. * 3, fill the PORT_DATA as EC register write data or get the data from it. */ -#define EC_IO_PORT_HIGH 0x0381 -#define EC_IO_PORT_LOW 0x0382 -#define EC_IO_PORT_DATA 0x0383 +#define EC_IO_PORT_HIGH 0x0381 +#define EC_IO_PORT_LOW 0x0382 +#define EC_IO_PORT_DATA 0x0383 /* * EC delay time is 500us for register and status access */ -#define EC_REG_DELAY 500 /* unit : us */ -#define EC_CMD_TIMEOUT 0x1000 +#define EC_REG_DELAY 500 /* unit : us */ +#define EC_CMD_TIMEOUT 0x1000 /* * EC access port for SCI communication */ -#define EC_CMD_PORT 0x66 -#define EC_STS_PORT 0x66 -#define EC_DAT_PORT 0x62 -#define CMD_INIT_IDLE_MODE 0xdd -#define CMD_EXIT_IDLE_MODE 0xdf -#define CMD_INIT_RESET_MODE 0xd8 -#define CMD_REBOOT_SYSTEM 0x8c -#define CMD_GET_EVENT_NUM 0x84 -#define CMD_PROGRAM_PIECE 0xda +#define EC_CMD_PORT 0x66 +#define EC_STS_PORT 0x66 +#define EC_DAT_PORT 0x62 +#define CMD_INIT_IDLE_MODE 0xdd +#define CMD_EXIT_IDLE_MODE 0xdf +#define CMD_INIT_RESET_MODE 0xd8 +#define CMD_REBOOT_SYSTEM 0x8c +#define CMD_GET_EVENT_NUM 0x84 +#define CMD_PROGRAM_PIECE 0xda /* temperature & fan registers */ -#define REG_TEMPERATURE_VALUE 0xF458 -#define REG_FAN_AUTO_MAN_SWITCH 0xF459 -#define BIT_FAN_AUTO 0 -#define BIT_FAN_MANUAL 1 -#define REG_FAN_CONTROL 0xF4D2 -#define BIT_FAN_CONTROL_ON (1 << 0) -#define BIT_FAN_CONTROL_OFF (0 << 0) -#define REG_FAN_STATUS 0xF4DA -#define BIT_FAN_STATUS_ON (1 << 0) -#define BIT_FAN_STATUS_OFF (0 << 0) -#define REG_FAN_SPEED_HIGH 0xFE22 -#define REG_FAN_SPEED_LOW 0xFE23 -#define REG_FAN_SPEED_LEVEL 0xF4CC +#define REG_TEMPERATURE_VALUE 0xF458 +#define REG_FAN_AUTO_MAN_SWITCH 0xF459 +#define BIT_FAN_AUTO 0 +#define BIT_FAN_MANUAL 1 +#define REG_FAN_CONTROL 0xF4D2 +#define BIT_FAN_CONTROL_ON (1 << 0) +#define BIT_FAN_CONTROL_OFF (0 << 0) +#define REG_FAN_STATUS 0xF4DA +#define BIT_FAN_STATUS_ON (1 << 0) +#define BIT_FAN_STATUS_OFF (0 << 0) +#define REG_FAN_SPEED_HIGH 0xFE22 +#define REG_FAN_SPEED_LOW 0xFE23 +#define REG_FAN_SPEED_LEVEL 0xF4CC /* fan speed divider */ -#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ +#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ /* battery registers */ -#define REG_BAT_DESIGN_CAP_HIGH 0xF77D -#define REG_BAT_DESIGN_CAP_LOW 0xF77E -#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 -#define REG_BAT_FULLCHG_CAP_LOW 0xF781 -#define REG_BAT_DESIGN_VOL_HIGH 0xF782 -#define REG_BAT_DESIGN_VOL_LOW 0xF783 -#define REG_BAT_CURRENT_HIGH 0xF784 -#define REG_BAT_CURRENT_LOW 0xF785 -#define REG_BAT_VOLTAGE_HIGH 0xF786 -#define REG_BAT_VOLTAGE_LOW 0xF787 -#define REG_BAT_TEMPERATURE_HIGH 0xF788 -#define REG_BAT_TEMPERATURE_LOW 0xF789 -#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 -#define REG_BAT_RELATIVE_CAP_LOW 0xF493 -#define REG_BAT_VENDOR 0xF4C4 -#define FLAG_BAT_VENDOR_SANYO 0x01 -#define FLAG_BAT_VENDOR_SIMPLO 0x02 -#define REG_BAT_CELL_COUNT 0xF4C6 -#define FLAG_BAT_CELL_3S1P 0x03 -#define FLAG_BAT_CELL_3S2P 0x06 -#define REG_BAT_CHARGE 0xF4A2 -#define FLAG_BAT_CHARGE_DISCHARGE 0x01 -#define FLAG_BAT_CHARGE_CHARGE 0x02 -#define FLAG_BAT_CHARGE_ACPOWER 0x00 -#define REG_BAT_STATUS 0xF4B0 -#define BIT_BAT_STATUS_LOW (1 << 5) -#define BIT_BAT_STATUS_DESTROY (1 << 2) -#define BIT_BAT_STATUS_FULL (1 << 1) -#define BIT_BAT_STATUS_IN (1 << 0) -#define REG_BAT_CHARGE_STATUS 0xF4B1 -#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) -#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) -#define REG_BAT_STATE 0xF482 -#define BIT_BAT_STATE_CHARGING (1 << 1) -#define BIT_BAT_STATE_DISCHARGING (1 << 0) -#define REG_BAT_POWER 0xF440 -#define BIT_BAT_POWER_S3 (1 << 2) -#define BIT_BAT_POWER_ON (1 << 1) -#define BIT_BAT_POWER_ACIN (1 << 0) +#define REG_BAT_DESIGN_CAP_HIGH 0xF77D +#define REG_BAT_DESIGN_CAP_LOW 0xF77E +#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 +#define REG_BAT_FULLCHG_CAP_LOW 0xF781 +#define REG_BAT_DESIGN_VOL_HIGH 0xF782 +#define REG_BAT_DESIGN_VOL_LOW 0xF783 +#define REG_BAT_CURRENT_HIGH 0xF784 +#define REG_BAT_CURRENT_LOW 0xF785 +#define REG_BAT_VOLTAGE_HIGH 0xF786 +#define REG_BAT_VOLTAGE_LOW 0xF787 +#define REG_BAT_TEMPERATURE_HIGH 0xF788 +#define REG_BAT_TEMPERATURE_LOW 0xF789 +#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 +#define REG_BAT_RELATIVE_CAP_LOW 0xF493 +#define REG_BAT_VENDOR 0xF4C4 +#define FLAG_BAT_VENDOR_SANYO 0x01 +#define FLAG_BAT_VENDOR_SIMPLO 0x02 +#define REG_BAT_CELL_COUNT 0xF4C6 +#define FLAG_BAT_CELL_3S1P 0x03 +#define FLAG_BAT_CELL_3S2P 0x06 +#define REG_BAT_CHARGE 0xF4A2 +#define FLAG_BAT_CHARGE_DISCHARGE 0x01 +#define FLAG_BAT_CHARGE_CHARGE 0x02 +#define FLAG_BAT_CHARGE_ACPOWER 0x00 +#define REG_BAT_STATUS 0xF4B0 +#define BIT_BAT_STATUS_LOW (1 << 5) +#define BIT_BAT_STATUS_DESTROY (1 << 2) +#define BIT_BAT_STATUS_FULL (1 << 1) +#define BIT_BAT_STATUS_IN (1 << 0) +#define REG_BAT_CHARGE_STATUS 0xF4B1 +#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) +#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) +#define REG_BAT_STATE 0xF482 +#define BIT_BAT_STATE_CHARGING (1 << 1) +#define BIT_BAT_STATE_DISCHARGING (1 << 0) +#define REG_BAT_POWER 0xF440 +#define BIT_BAT_POWER_S3 (1 << 2) +#define BIT_BAT_POWER_ON (1 << 1) +#define BIT_BAT_POWER_ACIN (1 << 0) /* other registers */ /* Audio: rd/wr */ -#define REG_AUDIO_VOLUME 0xF46C -#define REG_AUDIO_MUTE 0xF4E7 -#define REG_AUDIO_BEEP 0xF4D0 +#define REG_AUDIO_VOLUME 0xF46C +#define REG_AUDIO_MUTE 0xF4E7 +#define REG_AUDIO_BEEP 0xF4D0 /* USB port power or not: rd/wr */ -#define REG_USB0_FLAG 0xF461 -#define REG_USB1_FLAG 0xF462 -#define REG_USB2_FLAG 0xF463 -#define BIT_USB_FLAG_ON 1 -#define BIT_USB_FLAG_OFF 0 +#define REG_USB0_FLAG 0xF461 +#define REG_USB1_FLAG 0xF462 +#define REG_USB2_FLAG 0xF463 +#define BIT_USB_FLAG_ON 1 +#define BIT_USB_FLAG_OFF 0 /* LID */ -#define REG_LID_DETECT 0xF4BD -#define BIT_LID_DETECT_ON 1 -#define BIT_LID_DETECT_OFF 0 +#define REG_LID_DETECT 0xF4BD +#define BIT_LID_DETECT_ON 1 +#define BIT_LID_DETECT_OFF 0 /* CRT */ -#define REG_CRT_DETECT 0xF4AD -#define BIT_CRT_DETECT_PLUG 1 -#define BIT_CRT_DETECT_UNPLUG 0 +#define REG_CRT_DETECT 0xF4AD +#define BIT_CRT_DETECT_PLUG 1 +#define BIT_CRT_DETECT_UNPLUG 0 /* LCD backlight brightness adjust: 9 levels */ -#define REG_DISPLAY_BRIGHTNESS 0xF4F5 +#define REG_DISPLAY_BRIGHTNESS 0xF4F5 /* Black screen Status */ -#define BIT_DISPLAY_LCD_ON 1 -#define BIT_DISPLAY_LCD_OFF 0 +#define BIT_DISPLAY_LCD_ON 1 +#define BIT_DISPLAY_LCD_OFF 0 /* LCD backlight control: off/restore */ -#define REG_BACKLIGHT_CTRL 0xF7BD -#define BIT_BACKLIGHT_ON 1 -#define BIT_BACKLIGHT_OFF 0 +#define REG_BACKLIGHT_CTRL 0xF7BD +#define BIT_BACKLIGHT_ON 1 +#define BIT_BACKLIGHT_OFF 0 /* Reset the machine auto-clear: rd/wr */ -#define REG_RESET 0xF4EC -#define BIT_RESET_ON 1 +#define REG_RESET 0xF4EC +#define BIT_RESET_ON 1 /* Light the led: rd/wr */ -#define REG_LED 0xF4C8 -#define BIT_LED_RED_POWER (1 << 0) -#define BIT_LED_ORANGE_POWER (1 << 1) -#define BIT_LED_GREEN_CHARGE (1 << 2) -#define BIT_LED_RED_CHARGE (1 << 3) -#define BIT_LED_NUMLOCK (1 << 4) +#define REG_LED 0xF4C8 +#define BIT_LED_RED_POWER (1 << 0) +#define BIT_LED_ORANGE_POWER (1 << 1) +#define BIT_LED_GREEN_CHARGE (1 << 2) +#define BIT_LED_RED_CHARGE (1 << 3) +#define BIT_LED_NUMLOCK (1 << 4) /* Test led mode, all led on/off */ -#define REG_LED_TEST 0xF4C2 -#define BIT_LED_TEST_IN 1 -#define BIT_LED_TEST_OUT 0 +#define REG_LED_TEST 0xF4C2 +#define BIT_LED_TEST_IN 1 +#define BIT_LED_TEST_OUT 0 /* Camera on/off */ -#define REG_CAMERA_STATUS 0xF46A -#define BIT_CAMERA_STATUS_ON 1 -#define BIT_CAMERA_STATUS_OFF 0 -#define REG_CAMERA_CONTROL 0xF7B7 -#define BIT_CAMERA_CONTROL_OFF 0 -#define BIT_CAMERA_CONTROL_ON 1 +#define REG_CAMERA_STATUS 0xF46A +#define BIT_CAMERA_STATUS_ON 1 +#define BIT_CAMERA_STATUS_OFF 0 +#define REG_CAMERA_CONTROL 0xF7B7 +#define BIT_CAMERA_CONTROL_OFF 0 +#define BIT_CAMERA_CONTROL_ON 1 /* Wlan Status */ -#define REG_WLAN 0xF4FA -#define BIT_WLAN_ON 1 -#define BIT_WLAN_OFF 0 -#define REG_DISPLAY_LCD 0xF79F +#define REG_WLAN 0xF4FA +#define BIT_WLAN_ON 1 +#define BIT_WLAN_OFF 0 +#define REG_DISPLAY_LCD 0xF79F /* SCI Event Number from EC */ enum { diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c index 14b0818..6f8682e 100644 --- a/arch/mips/loongson/lemote-2f/irq.c +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -2,9 +2,9 @@ * Copyright (C) 2007 Lemote Inc. * Author: Fuxin Zhang, zhangfx@lemote.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -18,10 +18,10 @@ #include <loongson.h> #include <machine.h> -#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */ -#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */ -#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */ -#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */ +#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */ +#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */ +#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */ +#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */ #define LOONGSON_INT_BIT_INT0 (1 << 11) #define LOONGSON_INT_BIT_INT1 (1 << 12) @@ -108,9 +108,9 @@ struct irqaction cascade_irqaction = { void __init mach_init_irq(void) { /* init all controller - * 0-15 ------> i8259 interrupt - * 16-23 ------> mips cpu interrupt - * 32-63 ------> bonito irq + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq */ /* setup cs5536 as high level trigger */ diff --git a/arch/mips/loongson/lemote-2f/machtype.c b/arch/mips/loongson/lemote-2f/machtype.c index e860a27..b55e6ee 100644 --- a/arch/mips/loongson/lemote-2f/machtype.c +++ b/arch/mips/loongson/lemote-2f/machtype.c @@ -2,8 +2,8 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -22,11 +22,11 @@ void __init mach_prom_init_machtype(void) * machines, this will help the users a lot. * * If no "machtype=" passed, get machine type from "PMON_VER=". - * PMON_VER=LM8089 Lemote 8.9'' netbook - * LM8101 Lemote 10.1'' netbook - * (The above two netbooks have the same kernel support) - * LM6XXX Lemote FuLoong(2F) box series - * LM9XXX Lemote LynLoong PC series + * PMON_VER=LM8089 Lemote 8.9'' netbook + * LM8101 Lemote 10.1'' netbook + * (The above two netbooks have the same kernel support) + * LM6XXX Lemote FuLoong(2F) box series + * LM9XXX Lemote LynLoong PC series */ if (strstr(arcs_cmdline, "PMON_VER=LM")) { if (strstr(arcs_cmdline, "PMON_VER=LM8")) diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c index 36020a0..90962a3 100644 --- a/arch/mips/loongson/lemote-2f/reset.c +++ b/arch/mips/loongson/lemote-2f/reset.c @@ -5,8 +5,8 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -90,9 +90,9 @@ void ml2f_reboot(void) #define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d #define EC_SHUTDOWN_IO_PORT_LOW 0xff2e #define EC_SHUTDOWN_IO_PORT_DATA 0xff2f -#define REG_SHUTDOWN_HIGH 0xFC -#define REG_SHUTDOWN_LOW 0x29 -#define BIT_SHUTDOWN_ON (1 << 1) +#define REG_SHUTDOWN_HIGH 0xFC +#define REG_SHUTDOWN_LOW 0x29 +#define BIT_SHUTDOWN_ON (1 << 1) static void ml2f_shutdown(void) { diff --git a/arch/mips/loongson1/Platform b/arch/mips/loongson1/Platform index 99bdefe..1186344 100644 --- a/arch/mips/loongson1/Platform +++ b/arch/mips/loongson1/Platform @@ -1,4 +1,4 @@ -cflags-$(CONFIG_CPU_LOONGSON1) += \ +cflags-$(CONFIG_CPU_LOONGSON1) += \ $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32r2 -Wa,--trap diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c index 07133de..b4437f1 100644 --- a/arch/mips/loongson1/common/clock.c +++ b/arch/mips/loongson1/common/clock.c @@ -1,8 +1,8 @@ /* * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson1/common/irq.c b/arch/mips/loongson1/common/irq.c index 41bc8ff..455a770 100644 --- a/arch/mips/loongson1/common/irq.c +++ b/arch/mips/loongson1/common/irq.c @@ -1,8 +1,8 @@ /* * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson1/common/platform.c index 69dad4c..fdf8cb5 100644 --- a/arch/mips/loongson1/common/platform.c +++ b/arch/mips/loongson1/common/platform.c @@ -1,8 +1,8 @@ /* * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -23,7 +23,7 @@ .mapbase = LS1X_UART ## _id ## _BASE, \ .irq = LS1X_UART ## _id ## _IRQ, \ .iotype = UPIO_MEM, \ - .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \ + .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \ .type = PORT_16550A, \ } diff --git a/arch/mips/loongson1/common/prom.c b/arch/mips/loongson1/common/prom.c index 1f8e49f..2a47af5 100644 --- a/arch/mips/loongson1/common/prom.c +++ b/arch/mips/loongson1/common/prom.c @@ -3,8 +3,8 @@ * * Modified from arch/mips/pnx833x/common/prom.c. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -73,7 +73,7 @@ void __init prom_free_prom_memory(void) #define PORT(offset) (u8 *)(KSEG1ADDR(LS1X_UART0_BASE + offset)) -void __init prom_putchar(char c) +void prom_putchar(char c) { int timeout; diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c index fb979a7..d4f610f 100644 --- a/arch/mips/loongson1/common/reset.c +++ b/arch/mips/loongson1/common/reset.c @@ -1,8 +1,8 @@ /* * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson1/common/setup.c b/arch/mips/loongson1/common/setup.c index 62128cc..62f41af 100644 --- a/arch/mips/loongson1/common/setup.c +++ b/arch/mips/loongson1/common/setup.c @@ -1,8 +1,8 @@ /* * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/loongson1/ls1b/board.c b/arch/mips/loongson1/ls1b/board.c index 1fbd526..b26b10d 100644 --- a/arch/mips/loongson1/ls1b/board.c +++ b/arch/mips/loongson1/ls1b/board.c @@ -1,8 +1,8 @@ /* * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/math-emu/Makefile b/arch/mips/math-emu/Makefile index 9660723..121a848 100644 --- a/arch/mips/math-emu/Makefile +++ b/arch/mips/math-emu/Makefile @@ -9,4 +9,3 @@ obj-y := cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \ sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \ sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \ dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o - diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 47c77e7..afb5a0b 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -169,7 +169,7 @@ static int isBranchInstr(mips_instruction * i) /* * In the Linux kernel, we support selection of FPR format on the - * basis of the Status.FR bit. If an FPU is not present, the FR bit + * basis of the Status.FR bit. If an FPU is not present, the FR bit * is hardwired to zero, which would imply a 32-bit FPU even for * 64-bit CPUs so we rather look at TIF_32BIT_REGS. * FPU emu is slow and bulky and optimizing this function offers fairly @@ -234,7 +234,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx, if (xcp->cp0_cause & CAUSEF_BD) { /* * The instruction to be emulated is in a branch delay slot - * which means that we have to emulate the branch instruction + * which means that we have to emulate the branch instruction * BEFORE we do the cop1 instruction. * * This branch could be a COP1 branch, but in that case we @@ -1335,8 +1335,8 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, else { /* * The 'ieee754_csr' is an alias of - * ctx->fcr31. No need to copy ctx->fcr31 to - * ieee754_csr. But ieee754_csr.rm is ieee + * ctx->fcr31. No need to copy ctx->fcr31 to + * ieee754_csr. But ieee754_csr.rm is ieee * library modes. (not mips rounding mode) */ /* convert to ieee library modes */ diff --git a/arch/mips/math-emu/dp_add.c b/arch/mips/math-emu/dp_add.c index b422fca..c57c8ad 100644 --- a/arch/mips/math-emu/dp_add.c +++ b/arch/mips/math-emu/dp_add.c @@ -153,7 +153,7 @@ ieee754dp ieee754dp_add(ieee754dp x, ieee754dp y) xe = xe; xs = xs; - if (xm >> (DP_MBITS + 1 + 3)) { /* carry out */ + if (xm >> (DP_MBITS + 1 + 3)) { /* carry out */ xm = XDPSRS1(xm); xe++; } diff --git a/arch/mips/math-emu/dp_sqrt.c b/arch/mips/math-emu/dp_sqrt.c index a2a51b8..b874d60 100644 --- a/arch/mips/math-emu/dp_sqrt.c +++ b/arch/mips/math-emu/dp_sqrt.c @@ -87,7 +87,7 @@ ieee754dp ieee754dp_sqrt(ieee754dp x) if (xe > 512) { /* x > 2**-512? */ xe -= 512; /* x = x / 2**512 */ scalx += 256; - } else if (xe < -512) { /* x < 2**-512? */ + } else if (xe < -512) { /* x < 2**-512? */ xe += 512; /* x = x * 2**512 */ scalx -= 256; } @@ -108,13 +108,13 @@ ieee754dp ieee754dp_sqrt(ieee754dp x) y.bits &= 0xffffffff00000000LL; /* triple to almost 56 sig. bits: y ~= sqrt(x) to within 1 ulp */ - /* t=y*y; z=t; pt[n0]+=0x00100000; t+=z; z=(x-z)*y; */ + /* t=y*y; z=t; pt[n0]+=0x00100000; t+=z; z=(x-z)*y; */ z = t = ieee754dp_mul(y, y); t.parts.bexp += 0x001; t = ieee754dp_add(t, z); z = ieee754dp_mul(ieee754dp_sub(x, z), y); - /* t=z/(t+x) ; pt[n0]+=0x00100000; y+=t; */ + /* t=z/(t+x) ; pt[n0]+=0x00100000; y+=t; */ t = ieee754dp_div(z, ieee754dp_add(t, x)); t.parts.bexp += 0x001; y = ieee754dp_add(y, t); diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c index 0de098c..91e0a4b 100644 --- a/arch/mips/math-emu/dp_sub.c +++ b/arch/mips/math-emu/dp_sub.c @@ -158,7 +158,7 @@ ieee754dp ieee754dp_sub(ieee754dp x, ieee754dp y) xe = xe; xs = xs; - if (xm >> (DP_MBITS + 1 + 3)) { /* carry out */ + if (xm >> (DP_MBITS + 1 + 3)) { /* carry out */ xm = XDPSRS1(xm); /* shift preserving sticky */ xe++; } diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c index 30554e1..0015cf1 100644 --- a/arch/mips/math-emu/ieee754.c +++ b/arch/mips/math-emu/ieee754.c @@ -56,21 +56,21 @@ #endif const struct ieee754dp_konst __ieee754dp_spcvals[] = { - DPSTR(0, DP_EMIN - 1 + DP_EBIAS, 0, 0), /* + zero */ - DPSTR(1, DP_EMIN - 1 + DP_EBIAS, 0, 0), /* - zero */ + DPSTR(0, DP_EMIN - 1 + DP_EBIAS, 0, 0), /* + zero */ + DPSTR(1, DP_EMIN - 1 + DP_EBIAS, 0, 0), /* - zero */ DPSTR(0, DP_EBIAS, 0, 0), /* + 1.0 */ DPSTR(1, DP_EBIAS, 0, 0), /* - 1.0 */ DPSTR(0, 3 + DP_EBIAS, 0x40000, 0), /* + 10.0 */ DPSTR(1, 3 + DP_EBIAS, 0x40000, 0), /* - 10.0 */ - DPSTR(0, DP_EMAX + 1 + DP_EBIAS, 0, 0), /* + infinity */ - DPSTR(1, DP_EMAX + 1 + DP_EBIAS, 0, 0), /* - infinity */ + DPSTR(0, DP_EMAX + 1 + DP_EBIAS, 0, 0), /* + infinity */ + DPSTR(1, DP_EMAX + 1 + DP_EBIAS, 0, 0), /* - infinity */ DPSTR(0, DP_EMAX+1+DP_EBIAS, 0x7FFFF, 0xFFFFFFFF), /* + indef quiet Nan */ DPSTR(0, DP_EMAX + DP_EBIAS, 0xFFFFF, 0xFFFFFFFF), /* + max */ DPSTR(1, DP_EMAX + DP_EBIAS, 0xFFFFF, 0xFFFFFFFF), /* - max */ DPSTR(0, DP_EMIN + DP_EBIAS, 0, 0), /* + min normal */ DPSTR(1, DP_EMIN + DP_EBIAS, 0, 0), /* - min normal */ - DPSTR(0, DP_EMIN - 1 + DP_EBIAS, 0, 1), /* + min denormal */ - DPSTR(1, DP_EMIN - 1 + DP_EBIAS, 0, 1), /* - min denormal */ + DPSTR(0, DP_EMIN - 1 + DP_EBIAS, 0, 1), /* + min denormal */ + DPSTR(1, DP_EMIN - 1 + DP_EBIAS, 0, 1), /* - min denormal */ DPSTR(0, 31 + DP_EBIAS, 0, 0), /* + 1.0e31 */ DPSTR(0, 63 + DP_EBIAS, 0, 0), /* + 1.0e63 */ }; @@ -84,9 +84,9 @@ const struct ieee754sp_konst __ieee754sp_spcvals[] = { SPSTR(1, 3 + SP_EBIAS, 0x200000), /* - 10.0 */ SPSTR(0, SP_EMAX + 1 + SP_EBIAS, 0), /* + infinity */ SPSTR(1, SP_EMAX + 1 + SP_EBIAS, 0), /* - infinity */ - SPSTR(0, SP_EMAX+1+SP_EBIAS, 0x3FFFFF), /* + indef quiet Nan */ - SPSTR(0, SP_EMAX + SP_EBIAS, 0x7FFFFF), /* + max normal */ - SPSTR(1, SP_EMAX + SP_EBIAS, 0x7FFFFF), /* - max normal */ + SPSTR(0, SP_EMAX+1+SP_EBIAS, 0x3FFFFF), /* + indef quiet Nan */ + SPSTR(0, SP_EMAX + SP_EBIAS, 0x7FFFFF), /* + max normal */ + SPSTR(1, SP_EMAX + SP_EBIAS, 0x7FFFFF), /* - max normal */ SPSTR(0, SP_EMIN + SP_EBIAS, 0), /* + min normal */ SPSTR(1, SP_EMIN + SP_EBIAS, 0), /* - min normal */ SPSTR(0, SP_EMIN - 1 + SP_EBIAS, 1), /* + min denormal */ diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c index 080b5ca..068e56b 100644 --- a/arch/mips/math-emu/ieee754dp.c +++ b/arch/mips/math-emu/ieee754dp.c @@ -116,7 +116,7 @@ static u64 get_rounding(int sn, u64 xm) xm += 0x8; break; case IEEE754_RD: /* toward -Infinity */ - if (sn) /* ?? */ + if (sn) /* ?? */ xm += 0x8; break; } diff --git a/arch/mips/math-emu/ieee754int.h b/arch/mips/math-emu/ieee754int.h index 2a7d43f..4b6c6fb3 100644 --- a/arch/mips/math-emu/ieee754int.h +++ b/arch/mips/math-emu/ieee754int.h @@ -56,7 +56,7 @@ #define CLPAIR(x, y) ((x)*6+(y)) -#define CLEARCX \ +#define CLEARCX \ (ieee754_csr.cx = 0) #define SETCX(x) \ diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c index 271d00d..15d1e36 100644 --- a/arch/mips/math-emu/ieee754sp.c +++ b/arch/mips/math-emu/ieee754sp.c @@ -117,7 +117,7 @@ static unsigned get_rounding(int sn, unsigned xm) xm += 0x8; break; case IEEE754_RD: /* toward -Infinity */ - if (sn) /* ?? */ + if (sn) /* ?? */ xm += 0x8; break; } diff --git a/arch/mips/math-emu/ieee754xcpt.c b/arch/mips/math-emu/ieee754xcpt.c index b99a693..9671671 100644 --- a/arch/mips/math-emu/ieee754xcpt.c +++ b/arch/mips/math-emu/ieee754xcpt.c @@ -25,7 +25,7 @@ * Added preprocessor hacks to map to Linux kernel diagnostics. * * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. *************************************************************************/ #include <linux/kernel.h> diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c index 52e6c58..1c58657 100644 --- a/arch/mips/math-emu/kernel_linkage.c +++ b/arch/mips/math-emu/kernel_linkage.c @@ -1,6 +1,6 @@ /* * Kevin D. Kissell, kevink@mips and Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as diff --git a/arch/mips/math-emu/sp_add.c b/arch/mips/math-emu/sp_add.c index ae1a327..c446e64 100644 --- a/arch/mips/math-emu/sp_add.c +++ b/arch/mips/math-emu/sp_add.c @@ -148,7 +148,7 @@ ieee754sp ieee754sp_add(ieee754sp x, ieee754sp y) xe = xe; xs = xs; - if (xm >> (SP_MBITS + 1 + 3)) { /* carry out */ + if (xm >> (SP_MBITS + 1 + 3)) { /* carry out */ SPXSRSX1(); } } else { diff --git a/arch/mips/math-emu/sp_mul.c b/arch/mips/math-emu/sp_mul.c index 2722a25..fa4675c 100644 --- a/arch/mips/math-emu/sp_mul.c +++ b/arch/mips/math-emu/sp_mul.c @@ -131,7 +131,7 @@ ieee754sp ieee754sp_mul(ieee754sp x, ieee754sp y) hrm = hxm * hym; /* 16 * 16 => 32 */ { - unsigned t = lxm * hym; /* 16 * 16 => 32 */ + unsigned t = lxm * hym; /* 16 * 16 => 32 */ { unsigned at = lrm + (t << 16); hrm += at < lrm; @@ -141,7 +141,7 @@ ieee754sp ieee754sp_mul(ieee754sp x, ieee754sp y) } { - unsigned t = hxm * lym; /* 16 * 16 => 32 */ + unsigned t = hxm * lym; /* 16 * 16 => 32 */ { unsigned at = lrm + (t << 16); hrm += at < lrm; diff --git a/arch/mips/math-emu/sp_sub.c b/arch/mips/math-emu/sp_sub.c index 886ed5b..e595c6f 100644 --- a/arch/mips/math-emu/sp_sub.c +++ b/arch/mips/math-emu/sp_sub.c @@ -153,7 +153,7 @@ ieee754sp ieee754sp_sub(ieee754sp x, ieee754sp y) xe = xe; xs = xs; - if (xm >> (SP_MBITS + 1 + 3)) { /* carry out */ + if (xm >> (SP_MBITS + 1 + 3)) { /* carry out */ SPXSRSX1(); /* shift preserving sticky */ } } else { diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 90ceb963..1dcec30 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -16,9 +16,9 @@ obj-$(CONFIG_CPU_R3000) += c-r3k.o tlb-r3k.o obj-$(CONFIG_CPU_R8000) += c-r4k.o cex-gen.o tlb-r8k.o obj-$(CONFIG_CPU_SB1) += c-r4k.o cerr-sb1.o cex-sb1.o tlb-r4k.o obj-$(CONFIG_CPU_TX39XX) += c-tx39.o tlb-r3k.o -obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-octeon.o cex-oct.o tlb-r4k.o +obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-octeon.o cex-oct.o tlb-r4k.o obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o -obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o -obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o +obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o +obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index 6ec04da..8557fb5 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -106,7 +106,7 @@ static void octeon_flush_icache_all(void) * Called to flush all memory associated with a memory * context. * - * @mm: Memory context to flush + * @mm: Memory context to flush */ static void octeon_flush_cache_mm(struct mm_struct *mm) { diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index 031c4c2..704dc73 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -119,7 +119,7 @@ static void r3k_flush_icache_range(unsigned long start, unsigned long end) write_c0_status((ST0_ISC|ST0_SWC|flags)&~ST0_IEC); for (i = 0; i < size; i += 0x080) { - asm( "sb\t$0, 0x000(%0)\n\t" + asm( "sb\t$0, 0x000(%0)\n\t" "sb\t$0, 0x004(%0)\n\t" "sb\t$0, 0x008(%0)\n\t" "sb\t$0, 0x00c(%0)\n\t" @@ -176,7 +176,7 @@ static void r3k_flush_dcache_range(unsigned long start, unsigned long end) write_c0_status((ST0_ISC|flags)&~ST0_IEC); for (i = 0; i < size; i += 0x080) { - asm( "sb\t$0, 0x000(%0)\n\t" + asm( "sb\t$0, 0x000(%0)\n\t" "sb\t$0, 0x004(%0)\n\t" "sb\t$0, 0x008(%0)\n\t" "sb\t$0, 0x00c(%0)\n\t" @@ -285,13 +285,13 @@ static void r3k_flush_cache_sigtramp(unsigned long addr) write_c0_status(flags&~ST0_IEC); /* Fill the TLB to avoid an exception with caches isolated. */ - asm( "lw\t$0, 0x000(%0)\n\t" + asm( "lw\t$0, 0x000(%0)\n\t" "lw\t$0, 0x004(%0)\n\t" : : "r" (addr) ); write_c0_status((ST0_ISC|ST0_SWC|flags)&~ST0_IEC); - asm( "sb\t$0, 0x000(%0)\n\t" + asm( "sb\t$0, 0x000(%0)\n\t" "sb\t$0, 0x004(%0)\n\t" : : "r" (addr) ); diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 0f7d788..ecca559 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -160,7 +160,7 @@ static void __cpuinit r4k_blast_dcache_setup(void) "1:\n\t" \ ) #define CACHE32_UNROLL32_ALIGN JUMP_TO_ALIGN(10) /* 32 * 32 = 1024 */ -#define CACHE32_UNROLL32_ALIGN2 JUMP_TO_ALIGN(11) +#define CACHE32_UNROLL32_ALIGN2 JUMP_TO_ALIGN(11) static inline void blast_r4600_v1_icache32(void) { @@ -177,7 +177,7 @@ static inline void tx49_blast_icache32(void) unsigned long end = start + current_cpu_data.icache.waysize; unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit; unsigned long ws_end = current_cpu_data.icache.ways << - current_cpu_data.icache.waybit; + current_cpu_data.icache.waybit; unsigned long ws, addr; CACHE32_UNROLL32_ALIGN2; @@ -208,7 +208,7 @@ static inline void tx49_blast_icache32_page_indexed(unsigned long page) unsigned long end = start + PAGE_SIZE; unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit; unsigned long ws_end = current_cpu_data.icache.ways << - current_cpu_data.icache.waybit; + current_cpu_data.icache.waybit; unsigned long ws, addr; CACHE32_UNROLL32_ALIGN2; @@ -637,7 +637,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) * for the cache instruction on MIPS processors and * some processors, among them the RM5200 and RM7000 * QED processors will throw an address error for cache - * hit ops with insufficient alignment. Solved by + * hit ops with insufficient alignment. Solved by * aligning the address to cache line size. */ blast_inv_scache_range(addr, addr + size); @@ -864,7 +864,7 @@ static void __cpuinit probe_pcache(void) icache_size = 1 << (12 + ((config & CONF_IC) >> 9)); c->icache.linesz = 16 << ((config & CONF_IB) >> 5); c->icache.ways = 1; - c->icache.waybit = 0; /* doesn't matter */ + c->icache.waybit = 0; /* doesn't matter */ dcache_size = 1 << (12 + ((config & CONF_DC) >> 6)); c->dcache.linesz = 16 << ((config & CONF_DB) >> 4); @@ -923,7 +923,7 @@ static void __cpuinit probe_pcache(void) icache_size = 1 << (10 + ((config & CONF_IC) >> 9)); c->icache.linesz = 16 << ((config & CONF_IB) >> 5); c->icache.ways = 1; - c->icache.waybit = 0; /* doesn't matter */ + c->icache.waybit = 0; /* doesn't matter */ dcache_size = 1 << (10 + ((config & CONF_DC) >> 6)); c->dcache.linesz = 16 << ((config & CONF_DB) >> 4); @@ -986,8 +986,8 @@ static void __cpuinit probe_pcache(void) c->icache.ways = 1 + ((config1 >> 16) & 7); icache_size = c->icache.sets * - c->icache.ways * - c->icache.linesz; + c->icache.ways * + c->icache.linesz; c->icache.waybit = __ffs(icache_size/c->icache.ways); if (config & 0x8) /* VI bit */ @@ -1006,8 +1006,8 @@ static void __cpuinit probe_pcache(void) c->dcache.ways = 1 + ((config1 >> 7) & 7); dcache_size = c->dcache.sets * - c->dcache.ways * - c->dcache.linesz; + c->dcache.ways * + c->dcache.linesz; c->dcache.waybit = __ffs(dcache_size/c->dcache.ways); c->options |= MIPS_CPU_PREFETCH; @@ -1016,7 +1016,7 @@ static void __cpuinit probe_pcache(void) /* * Processor configuration sanity check for the R4000SC erratum - * #5. With page sizes larger than 32kB there is no possibility + * #5. With page sizes larger than 32kB there is no possibility * to get a VCE exception anymore so we don't care about this * misconfiguration. The case is rather theoretical anyway; * presumably no vendor is shipping his hardware in the "bad" @@ -1057,6 +1057,7 @@ static void __cpuinit probe_pcache(void) break; case CPU_M14KC: + case CPU_M14KEC: case CPU_24K: case CPU_34K: case CPU_74K: @@ -1088,7 +1089,7 @@ static void __cpuinit probe_pcache(void) break; } -#ifdef CONFIG_CPU_LOONGSON2 +#ifdef CONFIG_CPU_LOONGSON2 /* * LOONGSON2 has 4 way icache, but when using indexed cache op, * one op will act on all 4 ways @@ -1228,7 +1229,7 @@ static void __cpuinit setup_scache(void) #ifdef CONFIG_R5000_CPU_SCACHE r5k_sc_init(); #endif - return; + return; case CPU_RM7000: #ifdef CONFIG_RM7000_CPU_SCACHE diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index 87d23ca..ba9da27 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -33,9 +33,9 @@ extern int r3k_have_wired_reg; /* in r3k-tlb.c */ /* This sequence is required to ensure icache is disabled immediately */ #define TX39_STOP_STREAMING() \ __asm__ __volatile__( \ - ".set push\n\t" \ - ".set noreorder\n\t" \ - "b 1f\n\t" \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + "b 1f\n\t" \ "nop\n\t" \ "1:\n\t" \ ".set pop" \ @@ -361,7 +361,7 @@ void __cpuinit tx39_cache_init(void) /* TX39/H core (writethru direct-map cache) */ __flush_cache_vmap = tx39__flush_cache_vmap; __flush_cache_vunmap = tx39__flush_cache_vunmap; - flush_cache_all = tx39h_flush_icache_all; + flush_cache_all = tx39h_flush_icache_all; __flush_cache_all = tx39h_flush_icache_all; flush_cache_mm = (void *) tx39h_flush_icache_all; flush_cache_range = (void *) tx39h_flush_icache_all; @@ -409,8 +409,8 @@ void __cpuinit tx39_cache_init(void) _dma_cache_inv = tx39_dma_cache_inv; shm_align_mask = max_t(unsigned long, - (dcache_size / current_cpu_data.dcache.ways) - 1, - PAGE_SIZE - 1); + (dcache_size / current_cpu_data.dcache.ways) - 1, + PAGE_SIZE - 1); break; } diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c index 3571090..576add3 100644 --- a/arch/mips/mm/cerr-sb1.c +++ b/arch/mips/mm/cerr-sb1.c @@ -27,7 +27,7 @@ /* * We'd like to dump the L2_ECC_TAG register on errors, but errata make - * that unsafe... So for now we don't. (BCM1250/BCM112x erratum SOC-48.) + * that unsafe... So for now we don't. (BCM1250/BCM112x erratum SOC-48.) */ #undef DUMP_L2_ECC_TAG_ON_ERROR @@ -48,7 +48,7 @@ #define CP0_CERRI_EXTERNAL (1 << 26) #define CP0_CERRI_IDX_VALID(c) (!((c) & CP0_CERRI_EXTERNAL)) -#define CP0_CERRI_DATA (CP0_CERRI_DATA_PARITY) +#define CP0_CERRI_DATA (CP0_CERRI_DATA_PARITY) #define CP0_CERRD_MULTIPLE (1 << 31) #define CP0_CERRD_TAG_STATE (1 << 30) @@ -56,8 +56,8 @@ #define CP0_CERRD_DATA_SBE (1 << 28) #define CP0_CERRD_DATA_DBE (1 << 27) #define CP0_CERRD_EXTERNAL (1 << 26) -#define CP0_CERRD_LOAD (1 << 25) -#define CP0_CERRD_STORE (1 << 24) +#define CP0_CERRD_LOAD (1 << 25) +#define CP0_CERRD_STORE (1 << 24) #define CP0_CERRD_FILLWB (1 << 23) #define CP0_CERRD_COHERENCY (1 << 22) #define CP0_CERRD_DUPTAG (1 << 21) @@ -69,10 +69,10 @@ (CP0_CERRD_LOAD | CP0_CERRD_STORE | CP0_CERRD_FILLWB | CP0_CERRD_COHERENCY | CP0_CERRD_DUPTAG) #define CP0_CERRD_TYPES \ (CP0_CERRD_TAG_STATE | CP0_CERRD_TAG_ADDRESS | CP0_CERRD_DATA_SBE | CP0_CERRD_DATA_DBE | CP0_CERRD_EXTERNAL) -#define CP0_CERRD_DATA (CP0_CERRD_DATA_SBE | CP0_CERRD_DATA_DBE) +#define CP0_CERRD_DATA (CP0_CERRD_DATA_SBE | CP0_CERRD_DATA_DBE) -static uint32_t extract_ic(unsigned short addr, int data); -static uint32_t extract_dc(unsigned short addr, int data); +static uint32_t extract_ic(unsigned short addr, int data); +static uint32_t extract_dc(unsigned short addr, int data); static inline void breakout_errctl(unsigned int val) { @@ -209,11 +209,11 @@ asmlinkage void sb1_cache_error(void) "=r" (dpahi), "=r" (dpalo), "=r" (eepc)); cerr_dpa = (((uint64_t)dpahi) << 32) | dpalo; - printk(" c0_errorepc == %08x\n", eepc); - printk(" c0_errctl == %08x", errctl); + printk(" c0_errorepc == %08x\n", eepc); + printk(" c0_errctl == %08x", errctl); breakout_errctl(errctl); if (errctl & CP0_ERRCTL_ICACHE) { - printk(" c0_cerr_i == %08x", cerr_i); + printk(" c0_cerr_i == %08x", cerr_i); breakout_cerri(cerr_i); if (CP0_CERRI_IDX_VALID(cerr_i)) { /* Check index of EPC, allowing for delay slot */ @@ -229,7 +229,7 @@ asmlinkage void sb1_cache_error(void) } } if (errctl & CP0_ERRCTL_DCACHE) { - printk(" c0_cerr_d == %08x", cerr_d); + printk(" c0_cerr_d == %08x", cerr_d); breakout_cerrd(cerr_d); if (CP0_CERRD_DPA_VALID(cerr_d)) { printk(" c0_cerr_dpa == %010llx\n", cerr_dpa); @@ -256,7 +256,7 @@ asmlinkage void sb1_cache_error(void) /* * Calling panic() when a fatal cache error occurs scrambles the * state of the system (and the cache), making it difficult to - * investigate after the fact. However, if you just stall the CPU, + * investigate after the fact. However, if you just stall the CPU, * the other CPU may keep on running, which is typically very * undesirable. */ @@ -411,7 +411,7 @@ static uint32_t extract_ic(unsigned short addr, int data) " dmfc0 $1, $28, 1\n\t" " dsrl32 %1, $1, 0 \n\t" " sll %2, $1, 0 \n\t" - " .set pop \n" + " .set pop \n" : "=r" (datahi), "=r" (insta), "=r" (instb) : "r" ((way << 13) | addr | (offset << 3))); predecode = (datahi >> 8) & 0xff; @@ -441,8 +441,8 @@ static uint8_t dc_ecc(uint64_t dword) { uint64_t t; uint32_t w; - uint8_t p; - int i; + uint8_t p; + int i; p = 0; for (i = 7; i >= 0; i--) diff --git a/arch/mips/mm/cex-gen.S b/arch/mips/mm/cex-gen.S index e743622..45dff5c 100644 --- a/arch/mips/mm/cex-gen.S +++ b/arch/mips/mm/cex-gen.S @@ -14,17 +14,17 @@ #include <asm/stackframe.h> /* - * Game over. Go to the button. Press gently. Swear where allowed by + * Game over. Go to the button. Press gently. Swear where allowed by * legislation. */ LEAF(except_vec2_generic) .set noreorder .set noat - .set mips0 + .set mips0 /* * This is a very bad place to be. Our cache error * detection has triggered. If we have write-back data - * in the cache, we may not be able to recover. As a + * in the cache, we may not be able to recover. As a * first-order desperate measure, turn off KSEG0 cacheing. */ mfc0 k0,CP0_CONFIG diff --git a/arch/mips/mm/cex-oct.S b/arch/mips/mm/cex-oct.S index 3db8553..9029092 100644 --- a/arch/mips/mm/cex-oct.S +++ b/arch/mips/mm/cex-oct.S @@ -18,7 +18,7 @@ */ LEAF(except_vec2_octeon) - .set push + .set push .set mips64r2 .set noreorder .set noat @@ -27,19 +27,19 @@ /* due to an errata we need to read the COP0 CacheErr (Dcache) * before any cache/DRAM access */ - rdhwr k0, $0 /* get core_id */ - PTR_LA k1, cache_err_dcache - sll k0, k0, 3 + rdhwr k0, $0 /* get core_id */ + PTR_LA k1, cache_err_dcache + sll k0, k0, 3 PTR_ADDU k1, k0, k1 /* k1 = &cache_err_dcache[core_id] */ - dmfc0 k0, CP0_CACHEERR, 1 - sd k0, (k1) - dmtc0 $0, CP0_CACHEERR, 1 + dmfc0 k0, CP0_CACHEERR, 1 + sd k0, (k1) + dmtc0 $0, CP0_CACHEERR, 1 - /* check whether this is a nested exception */ - mfc0 k1, CP0_STATUS - andi k1, k1, ST0_EXL - beqz k1, 1f + /* check whether this is a nested exception */ + mfc0 k1, CP0_STATUS + andi k1, k1, ST0_EXL + beqz k1, 1f nop j cache_parity_error_octeon_non_recoverable nop @@ -48,22 +48,22 @@ 1: j handle_cache_err nop - .set pop + .set pop END(except_vec2_octeon) /* We need to jump to handle_cache_err so that the previous handler * can fit within 0x80 bytes. We also move from 0xFFFFFFFFAXXXXXXX - * space (uncached) to the 0xFFFFFFFF8XXXXXXX space (cached). */ + * space (uncached) to the 0xFFFFFFFF8XXXXXXX space (cached). */ LEAF(handle_cache_err) - .set push - .set noreorder - .set noat + .set push + .set noreorder + .set noat SAVE_ALL KMODE - jal cache_parity_error_octeon_recoverable + jal cache_parity_error_octeon_recoverable nop - j ret_from_exception + j ret_from_exception nop .set pop diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S index 89c412b..fe1d887 100644 --- a/arch/mips/mm/cex-sb1.S +++ b/arch/mips/mm/cex-sb1.S @@ -24,9 +24,9 @@ #include <asm/cacheops.h> #include <asm/sibyte/board.h> -#define C0_ERRCTL $26 /* CP0: Error info */ -#define C0_CERR_I $27 /* CP0: Icache error */ -#define C0_CERR_D $27,1 /* CP0: Dcache error */ +#define C0_ERRCTL $26 /* CP0: Error info */ +#define C0_CERR_I $27 /* CP0: Icache error */ +#define C0_CERR_D $27,1 /* CP0: Dcache error */ /* * Based on SiByte sample software cache-err/cerr.S @@ -88,7 +88,7 @@ attempt_recovery: /* * k0 has C0_ERRCTL << 1, which puts 'DC' at bit 31. Any * Dcache errors we can recover from will take more extensive - * processing. For now, they are considered "unrecoverable". + * processing. For now, they are considered "unrecoverable". * Note that 'DC' becoming set (outside of ERL mode) will * cause 'IC' to clear; so if there's an Icache error, we'll * only find out about it if we recover from this error and diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 3fab204..f9ef838 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -4,7 +4,7 @@ * for more details. * * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com> - * Copyright (C) 2000, 2001, 06 Ralf Baechle <ralf@linux-mips.org> + * Copyright (C) 2000, 2001, 06 Ralf Baechle <ralf@linux-mips.org> * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. */ diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index ddcec1e..0fead53 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -52,7 +52,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ #ifdef CONFIG_KPROBES /* - * This is to notify the fault handler of the kprobes. The + * This is to notify the fault handler of the kprobes. The * exception code is redundant as it is also carried in REGS, * but we pass it anyhow. */ @@ -216,7 +216,7 @@ bad_area_nosemaphore: } no_context: - /* Are we prepared to handle this kernel fault? */ + /* Are we prepared to handle this kernel fault? */ if (fixup_exception(regs)) { current->thread.cp0_baduaddr = address; return; diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c index dcfd573..d4ea5c9 100644 --- a/arch/mips/mm/gup.c +++ b/arch/mips/mm/gup.c @@ -249,7 +249,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write, * @nr_pages: number of pages from start to pin * @write: whether pages will be written to * @pages: array that receives pointers to the pages pinned. - * Should be at least nr_pages long. + * Should be at least nr_pages long. * * Attempt to pin user pages in memory without taking mm->mmap_sem. * If not successful, it will fall back to taking the lock and diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index be9acb2..6792925 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -66,7 +66,7 @@ /* * We have up to 8 empty zeroed pages so we can map one of the right colour - * when needed. This is necessary only on R4000 / R4400 SC and MC versions + * when needed. This is necessary only on R4000 / R4400 SC and MC versions * where we have to avoid VCED / VECI exceptions for good performance at * any price. Since page is never written to after the initialization we * don't have to care about aliases on other CPUs. @@ -380,7 +380,7 @@ void __init mem_init(void) high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); totalram_pages += free_all_bootmem(); - totalram_pages -= setup_zero_pages(); /* Setup zeroed pages. */ + totalram_pages -= setup_zero_pages(); /* Setup zeroed pages. */ reservedpages = ram = 0; for (tmp = 0; tmp < max_low_pfn; tmp++) diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c index cacfd31..7f840bc 100644 --- a/arch/mips/mm/ioremap.c +++ b/arch/mips/mm/ioremap.c @@ -22,7 +22,7 @@ static inline void remap_area_pte(pte_t * pte, unsigned long address, phys_t end; unsigned long pfn; pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | __READABLE - | __WRITEABLE | flags); + | __WRITEABLE | flags); address &= ~PMD_MASK; end = address + size; @@ -185,7 +185,7 @@ void __iounmap(const volatile void __iomem *addr) if (!p) printk(KERN_ERR "iounmap: bad address %p\n", addr); - kfree(p); + kfree(p); } EXPORT_SYMBOL(__ioremap); diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index 8e666c5..a29fba5 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -271,7 +271,7 @@ void __cpuinit build_clear_page(void) uasm_i_lui(&buf, AT, 0xa000); off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size) - * cache_line_size : 0; + * cache_line_size : 0; while (off) { build_clear_pref(&buf, -off); off -= cache_line_size; @@ -417,13 +417,13 @@ void __cpuinit build_copy_page(void) uasm_i_lui(&buf, AT, 0xa000); off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * - cache_line_size : 0; + cache_line_size : 0; while (off) { build_copy_load_pref(&buf, -off); off -= cache_line_size; } off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) * - cache_line_size : 0; + cache_line_size : 0; while (off) { build_copy_store_pref(&buf, -off); off -= cache_line_size; diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c index ee331bb..e8adc00 100644 --- a/arch/mips/mm/pgtable-64.c +++ b/arch/mips/mm/pgtable-64.c @@ -24,7 +24,7 @@ void pgd_init(unsigned long page) entry = (unsigned long)invalid_pmd_table; #endif - p = (unsigned long *) page; + p = (unsigned long *) page; end = p + PTRS_PER_PGD; do { @@ -45,7 +45,7 @@ void pmd_init(unsigned long addr, unsigned long pagetable) { unsigned long *p, *end; - p = (unsigned long *) addr; + p = (unsigned long *) addr; end = p + PTRS_PER_PMD; do { diff --git a/arch/mips/mm/sc-ip22.c b/arch/mips/mm/sc-ip22.c index 1eb708e..c6aaed9 100644 --- a/arch/mips/mm/sc-ip22.c +++ b/arch/mips/mm/sc-ip22.c @@ -159,7 +159,7 @@ static inline int __init indy_sc_probe(void) } /* XXX Check with wje if the Indy caches can differenciate between - writeback + invalidate and just invalidate. */ + writeback + invalidate and just invalidate. */ static struct bcache_ops indy_sc_ops = { .bc_enable = indy_sc_enable, .bc_disable = indy_sc_disable, diff --git a/arch/mips/mm/sc-r5k.c b/arch/mips/mm/sc-r5k.c index 8d90ff2..8bc6772 100644 --- a/arch/mips/mm/sc-r5k.c +++ b/arch/mips/mm/sc-r5k.c @@ -58,7 +58,7 @@ static void r5k_dma_cache_inv_sc(unsigned long addr, unsigned long size) static void r5k_sc_enable(void) { - unsigned long flags; + unsigned long flags; local_irq_save(flags); set_c0_config(R5K_CONF_SE); @@ -68,7 +68,7 @@ static void r5k_sc_enable(void) static void r5k_sc_disable(void) { - unsigned long flags; + unsigned long flags; local_irq_save(flags); blast_r5000_scache(); diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 2a7c972..493131c 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -424,7 +424,7 @@ void __cpuinit tlb_init(void) write_c0_pagegrain(pg); } - /* From this point on the ARC firmware is dead. */ + /* From this point on the ARC firmware is dead. */ local_flush_tlb_all(); /* Did I tell you that ARC SUCKS? */ diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 1c8ac49..820e661 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -5,8 +5,8 @@ * * Synthesize TLB refill handlers at runtime. * - * Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer - * Copyright (C) 2005, 2007, 2008, 2009 Maciej W. Rozycki + * Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer + * Copyright (C) 2005, 2007, 2008, 2009 Maciej W. Rozycki * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 2008, 2009 Cavium Networks, Inc. * Copyright (C) 2011 MIPS Technologies, Inc. @@ -212,7 +212,7 @@ static void __cpuinit uasm_bgezl_label(struct uasm_label **l, /* * pgtable bits are assigned dynamically depending on processor feature * and statically based on kernel configuration. This spits out the actual - * values the kernel is using. Required to make sense from disassembled + * values the kernel is using. Required to make sense from disassembled * TLB exception handlers. */ static void output_pgtable_bits_defines(void) @@ -464,8 +464,8 @@ static u32 final_handler[64] __cpuinitdata; * From the IDT errata for the QED RM5230 (Nevada), processor revision 1.0: * 2. A timing hazard exists for the TLBP instruction. * - * stalling_instruction - * TLBP + * stalling_instruction + * TLBP * * The JTLB is being read for the TLBP throughout the stall generated by the * previous instruction. This is not really correct as the stalling instruction @@ -476,7 +476,7 @@ static u32 final_handler[64] __cpuinitdata; * The software work-around is to not allow the instruction preceding the TLBP * to stall - make it an NOP or some other instruction guaranteed not to stall. * - * Errata 2 will not be fixed. This errata is also on the R5000. + * Errata 2 will not be fixed. This errata is also on the R5000. * * As if we MIPS hackers wouldn't know how to nop pipelines happy ... */ @@ -581,6 +581,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_4KC: case CPU_4KEC: case CPU_M14KC: + case CPU_M14KEC: case CPU_SB1: case CPU_SB1A: case CPU_4KSC: @@ -748,7 +749,7 @@ static __cpuinit void build_huge_update_entries(u32 **p, */ small_sequence = (HPAGE_SIZE >> 7) < 0x10000; - /* We can clobber tmp. It isn't used after this.*/ + /* We can clobber tmp. It isn't used after this.*/ if (!small_sequence) uasm_i_lui(p, tmp, HPAGE_SIZE >> (7 + 16)); @@ -830,12 +831,12 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, /* Clear lower 23 bits of context. */ uasm_i_dins(p, ptr, 0, 0, 23); - /* 1 0 1 0 1 << 6 xkphys cached */ + /* 1 0 1 0 1 << 6 xkphys cached */ uasm_i_ori(p, ptr, ptr, 0x540); uasm_i_drotr(p, ptr, ptr, 11); } #elif defined(CONFIG_SMP) -# ifdef CONFIG_MIPS_MT_SMTC +# ifdef CONFIG_MIPS_MT_SMTC /* * SMTC uses TCBind value as "CPU" index */ @@ -955,7 +956,7 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) /* 32 bit SMP has smp_processor_id() stored in CONTEXT. */ #ifdef CONFIG_SMP -#ifdef CONFIG_MIPS_MT_SMTC +#ifdef CONFIG_MIPS_MT_SMTC /* * SMTC uses TCBind value as "CPU" index */ @@ -965,7 +966,7 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) #else /* * smp_processor_id() << 3 is stored in CONTEXT. - */ + */ uasm_i_mfc0(p, ptr, C0_CONTEXT); UASM_i_LA_mostly(p, tmp, pgdc); uasm_i_srl(p, ptr, ptr, 23); @@ -1153,7 +1154,7 @@ build_fast_tlb_refill_handler (u32 **p, struct uasm_label **l, if (pgd_reg == -1) { vmalloc_branch_delay_filled = 1; - /* 1 0 1 0 1 << 6 xkphys cached */ + /* 1 0 1 0 1 << 6 xkphys cached */ uasm_i_ori(p, ptr, ptr, 0x540); uasm_i_drotr(p, ptr, ptr, 11); } @@ -1171,9 +1172,9 @@ build_fast_tlb_refill_handler (u32 **p, struct uasm_label **l, uasm_l_vmalloc_done(l, *p); /* - * tmp ptr - * fall-through case = badvaddr *pgd_current - * vmalloc case = badvaddr swapper_pg_dir + * tmp ptr + * fall-through case = badvaddr *pgd_current + * vmalloc case = badvaddr swapper_pg_dir */ if (vmalloc_branch_delay_filled) @@ -1212,7 +1213,7 @@ build_fast_tlb_refill_handler (u32 **p, struct uasm_label **l, uasm_il_bbit1(p, r, scratch, ilog2(_PAGE_HUGE), label_tlb_huge_update); /* * The in the LWX case we don't want to do the load in the - * delay slot. It cannot issue in the same cycle and may be + * delay slot. It cannot issue in the same cycle and may be * speculative and unneeded. */ if (use_lwx_insns()) diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c index 39b8910..942ff6c 100644 --- a/arch/mips/mm/uasm.c +++ b/arch/mips/mm/uasm.c @@ -7,7 +7,7 @@ * support a subset of instructions, and does not try to hide pipeline * effects like branch delay slots. * - * Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer + * Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer * Copyright (C) 2005, 2007 Maciej W. Rozycki * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) */ @@ -119,30 +119,30 @@ static struct insn insn_table[] __uasminitdata = { { insn_ext, M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE }, { insn_ins, M(spec3_op, 0, 0, 0, 0, ins_op), RS | RT | RD | RE }, { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM }, - { insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM }, + { insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM }, { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM }, { insn_jr, M(spec_op, 0, 0, 0, 0, jr_op), RS }, { insn_ld, M(ld_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_ldx, M(spec3_op, 0, 0, 0, ldx_op, lx_op), RS | RT | RD }, - { insn_lld, M(lld_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, + { insn_lld, M(lld_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_ll, M(ll_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, - { insn_lui, M(lui_op, 0, 0, 0, 0, 0), RT | SIMM }, + { insn_lui, M(lui_op, 0, 0, 0, 0, 0), RT | SIMM }, { insn_lw, M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_lwx, M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD }, { insn_mfc0, M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET}, { insn_mtc0, M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET}, - { insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM }, + { insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM }, { insn_or, M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD }, { insn_pref, M(pref_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_rfe, M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0 }, { insn_rotr, M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE }, - { insn_scd, M(scd_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, + { insn_scd, M(scd_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_sc, M(sc_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_sd, M(sd_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_sll, M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE }, { insn_sra, M(spec_op, 0, 0, 0, 0, sra_op), RT | RD | RE }, { insn_srl, M(spec_op, 0, 0, 0, 0, srl_op), RT | RD | RE }, - { insn_subu, M(spec_op, 0, 0, 0, 0, subu_op), RS | RT | RD }, + { insn_subu, M(spec_op, 0, 0, 0, 0, subu_op), RS | RT | RD }, { insn_sw, M(sw_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM}, { insn_tlbp, M(cop0_op, cop_op, 0, 0, 0, tlbp_op), 0 }, @@ -345,7 +345,7 @@ Ip_u2u1msbu3(op) \ } \ UASM_EXPORT_SYMBOL(uasm_i##op); -#define I_u2u1msbdu3(op) \ +#define I_u2u1msbdu3(op) \ Ip_u2u1msbu3(op) \ { \ build_insn(buf, insn##op, b, a, d-1, c); \ diff --git a/arch/mips/mti-malta/malta-amon.c b/arch/mips/mti-malta/malta-amon.c index 469d9b0..1e47844 100644 --- a/arch/mips/mti-malta/malta-amon.c +++ b/arch/mips/mti-malta/malta-amon.c @@ -70,12 +70,12 @@ void amon_cpu_start(int cpu, launch->sp = sp; launch->a0 = a0; - smp_wmb(); /* Target must see parameters before go */ + smp_wmb(); /* Target must see parameters before go */ launch->flags |= LAUNCH_FGO; - smp_wmb(); /* Target must see go before we poll */ + smp_wmb(); /* Target must see go before we poll */ while ((launch->flags & LAUNCH_FGONE) == 0) ; - smp_rmb(); /* Target will be updating flags soon */ + smp_rmb(); /* Target will be updating flags soon */ pr_debug("launch: cpu%d gone!\n", cpu); } diff --git a/arch/mips/mti-malta/malta-cmdline.c b/arch/mips/mti-malta/malta-cmdline.c index 1871c30..5576a30 100644 --- a/arch/mips/mti-malta/malta-cmdline.c +++ b/arch/mips/mti-malta/malta-cmdline.c @@ -46,7 +46,7 @@ void __init prom_init_cmdline(void) cp = &(arcs_cmdline[0]); while(actr < prom_argc) { - strcpy(cp, prom_argv(actr)); + strcpy(cp, prom_argv(actr)); cp += strlen(prom_argv(actr)); *cp++ = ' '; actr++; diff --git a/arch/mips/mti-malta/malta-display.c b/arch/mips/mti-malta/malta-display.c index 7c8828f..9bc58a2 100644 --- a/arch/mips/mti-malta/malta-display.c +++ b/arch/mips/mti-malta/malta-display.c @@ -37,10 +37,10 @@ void mips_display_message(const char *str) display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int)); for (i = 0; i <= 14; i=i+2) { - if (*str) - __raw_writel(*str++, display + i); + if (*str) + __raw_writel(*str++, display + i); else - __raw_writel(' ', display + i); + __raw_writel(' ', display + i); } } diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 27a6cdb..c2cbce9 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. * All rights reserved. * Authors: Carsten Langgaard <carstenl@mips.com> * Maciej W. Rozycki <macro@mips.com> @@ -110,20 +110,20 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str) int get_ethernet_addr(char *ethernet_addr) { - char *ethaddr_str; + char *ethaddr_str; - ethaddr_str = prom_getenv("ethaddr"); + ethaddr_str = prom_getenv("ethaddr"); if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); + printk("ethaddr not set in boot prom\n"); return -1; } str2eaddr(ethernet_addr, ethaddr_str); if (init_debug > 1) { - int i; + int i; printk("get_ethernet_addr: "); - for (i=0; i<5; i++) - printk("%02x:", (unsigned char)*(ethernet_addr+i)); + for (i=0; i<5; i++) + printk("%02x:", (unsigned char)*(ethernet_addr+i)); printk("%02x\n", *(ethernet_addr+i)); } diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 647b863..e364af7 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -84,10 +84,10 @@ static inline int mips_pcibios_iack(void) /* Flush Bonito register block */ (void) BONITO_PCIMAP_CFG; - iob(); /* sync */ + iob(); /* sync */ irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg); - iob(); /* sync */ + iob(); /* sync */ irq &= 0xff; BONITO_PCIMAP_CFG = 0; break; @@ -136,7 +136,7 @@ static void malta_ipi_irqdispatch(void) irq = gic_get_int(); if (irq < 0) - return; /* interrupt has already been cleared */ + return; /* interrupt has already been cleared */ do_IRQ(MIPS_GIC_IRQ_BASE + irq); } @@ -149,7 +149,7 @@ static void corehi_irqdispatch(void) struct pt_regs *regs = get_irq_regs(); printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n"); - printk(KERN_EMERG "epc : %08lx\nStatus: %08lx\n" + printk(KERN_EMERG "epc : %08lx\nStatus: %08lx\n" "Cause : %08lx\nbadVaddr : %08lx\n", regs->cp0_epc, regs->cp0_status, regs->cp0_cause, regs->cp0_badvaddr); @@ -249,20 +249,20 @@ static inline unsigned int irq_ffs(unsigned int pending) * on hardware interrupt 0 (MIPS IRQ 2)) like: * * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Combined hardware interrupt (hw0) - * 3 Hardware (ignored) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) * * We handle the IRQ according to _our_ priority which is: * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt * * then we just return, if multiple IRQs are pending then we will just take * another exception, big deal. @@ -396,7 +396,7 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { { X, X, X, X, 0 }, - { X, X, X, X, 0 }, + { X, X, X, X, 0 }, { X, X, X, X, 0 }, { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, @@ -410,7 +410,7 @@ static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { X, X, X, X, 0 }, + { X, X, X, X, 0 }, /* The remainder of this table is initialised by fill_ipi_map */ }; #undef X @@ -634,7 +634,7 @@ void malta_be_init(void) static char *tr[8] = { "mem", "gcr", "gic", "mmio", - "0x04", "0x05", "0x06", "0x07" + "0x04", "0x05", "0x06", "0x07" }; static char *mcmd[32] = { @@ -673,10 +673,10 @@ static char *mcmd[32] = { }; static char *core[8] = { - "Invalid/OK", "Invalid/Data", + "Invalid/OK", "Invalid/Data", "Shared/OK", "Shared/Data", "Modified/OK", "Modified/Data", - "Exclusive/OK", "Exclusive/Data" + "Exclusive/OK", "Exclusive/Data" }; static char *causes[32] = { diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index a96d281..f3d43aa 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -47,7 +47,7 @@ static char *mtypes[3] = { }; #endif -/* determined physical memory size, not overridden by command line args */ +/* determined physical memory size, not overridden by command line args */ unsigned long physical_memsize = 0L; static struct prom_pmemblock * __init prom_getmdesc(void) @@ -158,7 +158,7 @@ void __init prom_meminit(void) size = p->size; add_memory_region(base, size, type); - p++; + p++; } } diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index 2147cb3..37134dd 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. * All rights reserved. * Authors: Carsten Langgaard <carstenl@mips.com> * Maciej W. Rozycki <macro@mips.com> @@ -127,7 +127,7 @@ void __init mips_pcibios_init(void) map = map1; } mask = ~(start ^ end); - /* We don't support remapping with a discontiguous mask. */ + /* We don't support remapping with a discontiguous mask. */ BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && mask != ~((mask & -mask) - 1)); gt64120_mem_resource.start = start; @@ -144,7 +144,7 @@ void __init mips_pcibios_init(void) map = GT_READ(GT_PCI0IOREMAP_OFS); end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); mask = ~(start ^ end); - /* We don't support remapping with a discontiguous mask. */ + /* We don't support remapping with a discontiguous mask. */ BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && mask != ~((mask & -mask) - 1)); gt64120_io_resource.start = map & mask; diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c index 7473217..132f866 100644 --- a/arch/mips/mti-malta/malta-platform.c +++ b/arch/mips/mti-malta/malta-platform.c @@ -93,7 +93,7 @@ static struct mtd_partition malta_mtd_partitions[] = { .mask_flags = MTD_WRITEABLE }, { .name = "User FS", - .offset = 0x100000, + .offset = 0x100000, .size = 0x2e0000 }, { .name = "Board Config", diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c index 2e28f65..200f64d 100644 --- a/arch/mips/mti-malta/malta-setup.c +++ b/arch/mips/mti-malta/malta-setup.c @@ -78,9 +78,9 @@ const char *get_system_type(void) } #if defined(CONFIG_MIPS_MT_SMTC) -const char display_string[] = " SMTC LINUX ON MALTA "; +const char display_string[] = " SMTC LINUX ON MALTA "; #else -const char display_string[] = " LINUX ON MALTA "; +const char display_string[] = " LINUX ON MALTA "; #endif /* CONFIG_MIPS_MT_SMTC */ #ifdef CONFIG_BLK_DEV_FD diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index 1efc8c3..becbf47 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -126,7 +126,7 @@ int plat_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity, * to the CPU daughterboard, and on the CoreFPGA2/3 34K models, * that signal is brought to IP2 of both VPEs. To avoid racing * concurrent interrupt service events, IP2 is enabled only on - * one VPE, by convention VPE0. So long as no bits are ever + * one VPE, by convention VPE0. So long as no bits are ever * cleared in the affinity mask, there will never be any * interrupt forwarding. But as soon as a program or operator * sets affinity for one of the related IRQs, we need to make diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c index 115f5bc..a144b89 100644 --- a/arch/mips/mti-malta/malta-time.c +++ b/arch/mips/mti-malta/malta-time.c @@ -17,7 +17,6 @@ * * Setting up the clock on the MIPS boards. */ - #include <linux/types.h> #include <linux/i8253.h> #include <linux/init.h> @@ -25,7 +24,6 @@ #include <linux/sched.h> #include <linux/spinlock.h> #include <linux/interrupt.h> -#include <linux/time.h> #include <linux/timex.h> #include <linux/mc146818rtc.h> @@ -34,11 +32,11 @@ #include <asm/hardirq.h> #include <asm/irq.h> #include <asm/div64.h> -#include <asm/cpu.h> #include <asm/setup.h> #include <asm/time.h> #include <asm/mc146818-time.h> #include <asm/msc01_ic.h> +#include <asm/gic.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/prom.h> @@ -46,6 +44,7 @@ #include <asm/mips-boards/maltaint.h> unsigned long cpu_khz; +int gic_frequency; static int mips_cpu_timer_irq; static int mips_cpu_perf_irq; @@ -61,44 +60,50 @@ static void mips_perf_dispatch(void) do_IRQ(mips_cpu_perf_irq); } +static unsigned int freqround(unsigned int freq, unsigned int amount) +{ + freq += amount; + freq -= freq % (amount*2); + return freq; +} + /* - * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect + * Estimate CPU and GIC frequencies. */ -static unsigned int __init estimate_cpu_frequency(void) +static void __init estimate_frequencies(void) { - unsigned int prid = read_c0_prid() & 0xffff00; - unsigned int count; - unsigned long flags; - unsigned int start; + unsigned int count, start; + unsigned int giccount = 0, gicstart = 0; local_irq_save(flags); - /* Start counter exactly on falling edge of update flag */ + /* Start counter exactly on falling edge of update flag. */ while (CMOS_READ(RTC_REG_A) & RTC_UIP); while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - /* Start r4k counter. */ + /* Initialize counters. */ start = read_c0_count(); + if (gic_present) + GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), gicstart); - /* Read counter exactly on falling edge of update flag */ + /* Read counter exactly on falling edge of update flag. */ while (CMOS_READ(RTC_REG_A) & RTC_UIP); while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - count = read_c0_count() - start; + count = read_c0_count(); + if (gic_present) + GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), giccount); - /* restore interrupts */ local_irq_restore(flags); - mips_hpt_frequency = count; - if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && - (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) - count *= 2; - - count += 5000; /* round */ - count -= count%10000; + count -= start; + if (gic_present) + giccount -= gicstart; - return count; + mips_hpt_frequency = count; + if (gic_present) + gic_frequency = giccount; } void read_persistent_clock(struct timespec *ts) @@ -144,22 +149,34 @@ unsigned int __cpuinit get_c0_compare_int(void) void __init plat_time_init(void) { - unsigned int est_freq; - - /* Set Data mode - binary. */ - CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); - - est_freq = estimate_cpu_frequency(); + unsigned int prid = read_c0_prid() & 0xffff00; + unsigned int freq; - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, - (est_freq%1000000)*100/1000000); + estimate_frequencies(); - cpu_khz = est_freq / 1000; + freq = mips_hpt_frequency; + if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && + (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) + freq *= 2; + freq = freqround(freq, 5000); + pr_debug("CPU frequency %d.%02d MHz\n", freq/1000000, + (freq%1000000)*100/1000000); + cpu_khz = freq / 1000; + + if (gic_present) { + freq = freqround(gic_frequency, 5000); + pr_debug("GIC frequency %d.%02d MHz\n", freq/1000000, + (freq%1000000)*100/1000000); + gic_clocksource_init(gic_frequency); + } else + init_r4k_clocksource(); - mips_scroll_message(); -#ifdef CONFIG_I8253 /* Only Malta has a PIT */ +#ifdef CONFIG_I8253 + /* Only Malta has a PIT. */ setup_pit_timer(); #endif + mips_scroll_message(); + plat_perf_setup(); } diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile index 626afeac..10ec701 100644 --- a/arch/mips/mti-sead3/Makefile +++ b/arch/mips/mti-sead3/Makefile @@ -5,10 +5,12 @@ # Copyright (C) 2008 Wind River Systems, Inc. # written by Ralf Baechle <ralf@linux-mips.org> # +# Copyright (C) 2012 MIPS Technoligies, Inc. All rights reserved. +# Steven J. Hill <sjhill@mips.com> +# obj-y := sead3-lcd.o sead3-cmdline.o \ sead3-display.o sead3-init.o sead3-int.o \ - sead3-mtd.o sead3-net.o \ - sead3-memory.o sead3-platform.o \ + sead3-mtd.o sead3-net.o sead3-platform.o \ sead3-reset.o sead3-setup.o sead3-time.o obj-y += sead3-i2c-dev.o sead3-i2c.o \ @@ -17,3 +19,7 @@ obj-y += sead3-i2c-dev.o sead3-i2c.o \ obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o obj-$(CONFIG_USB_EHCI_HCD) += sead3-ehci.o +obj-$(CONFIG_OF) += sead3.dtb.o + +$(obj)/%.dtb: $(obj)/%.dts + $(call if_changed,dtc) diff --git a/arch/mips/mti-sead3/leds-sead3.c b/arch/mips/mti-sead3/leds-sead3.c index a95ac59..322148c 100644 --- a/arch/mips/mti-sead3/leds-sead3.c +++ b/arch/mips/mti-sead3/leds-sead3.c @@ -33,12 +33,12 @@ static void sead3_fled_set(struct led_classdev *led_cdev, static struct led_classdev sead3_pled = { .name = "sead3::pled", - .brightness_set = sead3_pled_set, + .brightness_set = sead3_pled_set, }; static struct led_classdev sead3_fled = { .name = "sead3::fled", - .brightness_set = sead3_fled_set, + .brightness_set = sead3_fled_set, }; #ifdef CONFIG_PM @@ -125,4 +125,3 @@ module_exit(sead3_led_exit); MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>"); MODULE_DESCRIPTION("SEAD3 LED driver"); MODULE_LICENSE("GPL"); - diff --git a/arch/mips/mti-sead3/sead3-console.c b/arch/mips/mti-sead3/sead3-console.c index b367391..2ddef19 100644 --- a/arch/mips/mti-sead3/sead3-console.c +++ b/arch/mips/mti-sead3/sead3-console.c @@ -10,8 +10,8 @@ #include <linux/serial_reg.h> #include <linux/io.h> -#define SEAD_UART1_REGS_BASE 0xbf000800 /* ttyS1 = DB9 port */ -#define SEAD_UART0_REGS_BASE 0xbf000900 /* ttyS0 = USB port */ +#define SEAD_UART1_REGS_BASE 0xbf000800 /* ttyS1 = DB9 port */ +#define SEAD_UART0_REGS_BASE 0xbf000900 /* ttyS0 = USB port */ #define PORT(base_addr, offset) ((unsigned int __iomem *)(base_addr+(offset)*4)) static char console_port = 1; diff --git a/arch/mips/mti-sead3/sead3-display.c b/arch/mips/mti-sead3/sead3-display.c index 8308c7f..e389326 100644 --- a/arch/mips/mti-sead3/sead3-display.c +++ b/arch/mips/mti-sead3/sead3-display.c @@ -21,7 +21,7 @@ static unsigned int max_display_count; #define LCD_SETDDRAM 0x80 #define LCD_IR_BF 0x80 -const char display_string[] = " LINUX ON SEAD3 "; +const char display_string[] = " LINUX ON SEAD3 "; static void scroll_display_message(unsigned long data); static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0); diff --git a/arch/mips/mti-sead3/sead3-i2c-drv.c b/arch/mips/mti-sead3/sead3-i2c-drv.c index 7aa2225..1f787a6 100644 --- a/arch/mips/mti-sead3/sead3-i2c-drv.c +++ b/arch/mips/mti-sead3/sead3-i2c-drv.c @@ -13,32 +13,32 @@ #include <linux/platform_device.h> #define PIC32_I2CxCON 0x0000 -#define PIC32_I2CCON_ON (1<<15) -#define PIC32_I2CCON_ACKDT (1<<5) -#define PIC32_I2CCON_ACKEN (1<<4) -#define PIC32_I2CCON_RCEN (1<<3) -#define PIC32_I2CCON_PEN (1<<2) -#define PIC32_I2CCON_RSEN (1<<1) -#define PIC32_I2CCON_SEN (1<<0) +#define PIC32_I2CCON_ON (1<<15) +#define PIC32_I2CCON_ACKDT (1<<5) +#define PIC32_I2CCON_ACKEN (1<<4) +#define PIC32_I2CCON_RCEN (1<<3) +#define PIC32_I2CCON_PEN (1<<2) +#define PIC32_I2CCON_RSEN (1<<1) +#define PIC32_I2CCON_SEN (1<<0) #define PIC32_I2CxCONCLR 0x0004 #define PIC32_I2CxCONSET 0x0008 #define PIC32_I2CxSTAT 0x0010 #define PIC32_I2CxSTATCLR 0x0014 -#define PIC32_I2CSTAT_ACKSTAT (1<<15) -#define PIC32_I2CSTAT_TRSTAT (1<<14) -#define PIC32_I2CSTAT_BCL (1<<10) -#define PIC32_I2CSTAT_IWCOL (1<<7) -#define PIC32_I2CSTAT_I2COV (1<<6) +#define PIC32_I2CSTAT_ACKSTAT (1<<15) +#define PIC32_I2CSTAT_TRSTAT (1<<14) +#define PIC32_I2CSTAT_BCL (1<<10) +#define PIC32_I2CSTAT_IWCOL (1<<7) +#define PIC32_I2CSTAT_I2COV (1<<6) #define PIC32_I2CxBRG 0x0040 #define PIC32_I2CxTRN 0x0050 #define PIC32_I2CxRCV 0x0060 static DEFINE_SPINLOCK(pic32_bus_lock); -static void __iomem *bus_xfer = (void __iomem *)0xbf000600; +static void __iomem *bus_xfer = (void __iomem *)0xbf000600; static void __iomem *bus_status = (void __iomem *)0xbf000060; -#define DELAY() udelay(100) +#define DELAY() udelay(100) static inline unsigned int ioready(void) { diff --git a/arch/mips/mti-sead3/sead3-init.c b/arch/mips/mti-sead3/sead3-init.c index a958cad..f95abaa 100644 --- a/arch/mips/mti-sead3/sead3-init.c +++ b/arch/mips/mti-sead3/sead3-init.c @@ -77,7 +77,6 @@ void __init prom_init(void) board_ejtag_handler_setup = mips_ejtag_setup; prom_init_cmdline(); - prom_meminit(); #ifdef CONFIG_EARLY_PRINTK if ((strstr(prom_getcmdline(), "console=ttyS0")) != NULL) prom_init_early_console(0); @@ -89,3 +88,7 @@ void __init prom_init(void) strcat(prom_getcmdline(), " console=ttyS0,38400n8r"); #endif } + +void prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/mti-sead3/sead3-memory.c b/arch/mips/mti-sead3/sead3-memory.c deleted file mode 100644 index da92441..0000000 --- a/arch/mips/mti-sead3/sead3-memory.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. - */ -#include <linux/bootmem.h> - -#include <asm/bootinfo.h> -#include <asm/sections.h> -#include <asm/mips-boards/prom.h> - -enum yamon_memtypes { - yamon_dontuse, - yamon_prom, - yamon_free, -}; - -static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; - -/* determined physical memory size, not overridden by command line args */ -unsigned long physical_memsize = 0L; - -struct prom_pmemblock * __init prom_getmdesc(void) -{ - char *memsize_str, *ptr; - unsigned int memsize; - static char cmdline[COMMAND_LINE_SIZE] __initdata; - long val; - int tmp; - - /* otherwise look in the environment */ - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { - pr_warn("memsize not set in boot prom, set to default 32Mb\n"); - physical_memsize = 0x02000000; - } else { - tmp = kstrtol(memsize_str, 0, &val); - physical_memsize = (unsigned long)val; - } - -#ifdef CONFIG_CPU_BIG_ENDIAN - /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last - word of physical memory */ - physical_memsize -= PAGE_SIZE; -#endif - - /* Check the command line for a memsize directive that overrides - the physical/default amount */ - strcpy(cmdline, arcs_cmdline); - ptr = strstr(cmdline, "memsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " memsize="); - - if (ptr) - memsize = memparse(ptr + 8, &ptr); - else - memsize = physical_memsize; - - memset(mdesc, 0, sizeof(mdesc)); - - mdesc[0].type = yamon_dontuse; - mdesc[0].base = 0x00000000; - mdesc[0].size = 0x00001000; - - mdesc[1].type = yamon_prom; - mdesc[1].base = 0x00001000; - mdesc[1].size = 0x000ef000; - - /* - * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the - * south bridge and PCI access always forwarded to the ISA Bus and - * BIOSCS# is always generated. - * This mean that this area can't be used as DMA memory for PCI - * devices. - */ - mdesc[2].type = yamon_dontuse; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; - - mdesc[3].type = yamon_dontuse; - mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - - mdesc[3].base; - - mdesc[4].type = yamon_free; - mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); - mdesc[4].size = memsize - mdesc[4].base; - - return &mdesc[0]; -} - -static int __init prom_memtype_classify(unsigned int type) -{ - switch (type) { - case yamon_free: - return BOOT_MEM_RAM; - case yamon_prom: - return BOOT_MEM_ROM_DATA; - default: - return BOOT_MEM_RESERVED; - } -} - -void __init prom_meminit(void) -{ - struct prom_pmemblock *p; - - p = prom_getmdesc(); - - while (p->size) { - long type; - unsigned long base, size; - - type = prom_memtype_classify(p->type); - base = p->base; - size = p->size; - - add_memory_region(base, size, type); - p++; - } -} - -void __init prom_free_prom_memory(void) -{ - unsigned long addr; - int i; - - for (i = 0; i < boot_mem_map.nr_map; i++) { - if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) - continue; - - addr = boot_mem_map.map[i].addr; - free_init_pages("prom memory", - addr, addr + boot_mem_map.map[i].size); - } -} diff --git a/arch/mips/mti-sead3/sead3-net.c b/arch/mips/mti-sead3/sead3-net.c index 04d704d..dd11e7e 100644 --- a/arch/mips/mti-sead3/sead3-net.c +++ b/arch/mips/mti-sead3/sead3-net.c @@ -19,8 +19,8 @@ static struct smsc911x_platform_config sead3_smsc911x_data = { struct resource sead3_net_resourcess[] = { { - .start = 0x1f010000, - .end = 0x1f01ffff, + .start = 0x1f010000, + .end = 0x1f01ffff, .flags = IORESOURCE_MEM }, { diff --git a/arch/mips/mti-sead3/sead3-pic32-bus.c b/arch/mips/mti-sead3/sead3-pic32-bus.c index 9f0d89b..eb2bf93 100644 --- a/arch/mips/mti-sead3/sead3-pic32-bus.c +++ b/arch/mips/mti-sead3/sead3-pic32-bus.c @@ -17,16 +17,16 @@ #define PIC32_SYSRD 0x02 #define PIC32_WR 0x10 #define PIC32_SYSWR 0x20 -#define PIC32_IRQ_CLR 0x40 +#define PIC32_IRQ_CLR 0x40 #define PIC32_STATUS 0x80 -#define DELAY() udelay(100) /* FIXME: needed? */ +#define DELAY() udelay(100) /* FIXME: needed? */ /* spinlock to ensure atomic access to PIC32 */ static DEFINE_SPINLOCK(pic32_bus_lock); /* FIXME: io_remap these */ -static void __iomem *bus_xfer = (void __iomem *)0xbf000600; +static void __iomem *bus_xfer = (void __iomem *)0xbf000600; static void __iomem *bus_status = (void __iomem *)0xbf000060; static inline unsigned int ioready(void) diff --git a/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c b/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c index 514675e..b921e5ec 100644 --- a/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c +++ b/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c @@ -19,40 +19,40 @@ #define PIC32_I2CxCONCLR 0x0004 #define PIC32_I2CxCONSET 0x0008 #define PIC32_I2CxCONINV 0x000C -#define I2CCON_ON (1<<15) -#define I2CCON_FRZ (1<<14) -#define I2CCON_SIDL (1<<13) -#define I2CCON_SCLREL (1<<12) -#define I2CCON_STRICT (1<<11) -#define I2CCON_A10M (1<<10) -#define I2CCON_DISSLW (1<<9) -#define I2CCON_SMEN (1<<8) -#define I2CCON_GCEN (1<<7) -#define I2CCON_STREN (1<<6) -#define I2CCON_ACKDT (1<<5) -#define I2CCON_ACKEN (1<<4) -#define I2CCON_RCEN (1<<3) -#define I2CCON_PEN (1<<2) -#define I2CCON_RSEN (1<<1) -#define I2CCON_SEN (1<<0) +#define I2CCON_ON (1<<15) +#define I2CCON_FRZ (1<<14) +#define I2CCON_SIDL (1<<13) +#define I2CCON_SCLREL (1<<12) +#define I2CCON_STRICT (1<<11) +#define I2CCON_A10M (1<<10) +#define I2CCON_DISSLW (1<<9) +#define I2CCON_SMEN (1<<8) +#define I2CCON_GCEN (1<<7) +#define I2CCON_STREN (1<<6) +#define I2CCON_ACKDT (1<<5) +#define I2CCON_ACKEN (1<<4) +#define I2CCON_RCEN (1<<3) +#define I2CCON_PEN (1<<2) +#define I2CCON_RSEN (1<<1) +#define I2CCON_SEN (1<<0) #define PIC32_I2CxSTAT 0x0010 #define PIC32_I2CxSTATCLR 0x0014 #define PIC32_I2CxSTATSET 0x0018 #define PIC32_I2CxSTATINV 0x001C -#define I2CSTAT_ACKSTAT (1<<15) -#define I2CSTAT_TRSTAT (1<<14) -#define I2CSTAT_BCL (1<<10) -#define I2CSTAT_GCSTAT (1<<9) -#define I2CSTAT_ADD10 (1<<8) -#define I2CSTAT_IWCOL (1<<7) -#define I2CSTAT_I2COV (1<<6) -#define I2CSTAT_DA (1<<5) -#define I2CSTAT_P (1<<4) -#define I2CSTAT_S (1<<3) -#define I2CSTAT_RW (1<<2) -#define I2CSTAT_RBF (1<<1) -#define I2CSTAT_TBF (1<<0) +#define I2CSTAT_ACKSTAT (1<<15) +#define I2CSTAT_TRSTAT (1<<14) +#define I2CSTAT_BCL (1<<10) +#define I2CSTAT_GCSTAT (1<<9) +#define I2CSTAT_ADD10 (1<<8) +#define I2CSTAT_IWCOL (1<<7) +#define I2CSTAT_I2COV (1<<6) +#define I2CSTAT_DA (1<<5) +#define I2CSTAT_P (1<<4) +#define I2CSTAT_S (1<<3) +#define I2CSTAT_RW (1<<2) +#define I2CSTAT_RBF (1<<1) +#define I2CSTAT_TBF (1<<0) #define PIC32_I2CxADD 0x0020 #define PIC32_I2CxADDCLR 0x0024 diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c index 8ad46ad..f012fd1 100644 --- a/arch/mips/mti-sead3/sead3-setup.c +++ b/arch/mips/mti-sead3/sead3-setup.c @@ -6,6 +6,12 @@ * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. */ #include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/of_fdt.h> +#include <linux/bootmem.h> + +#include <asm/mips-boards/generic.h> +#include <asm/prom.h> int coherentio; /* 0 => no DMA cache coherency (may be set by user) */ int hw_coherentio; /* 0 => no HW DMA cache coherency (reflects real HW) */ @@ -17,4 +23,25 @@ const char *get_system_type(void) void __init plat_mem_setup(void) { + /* + * Load the builtin devicetree. This causes the chosen node to be + * parsed resulting in our memory appearing + */ + __dt_setup_arch(&__dtb_start); +} + +void __init device_tree_init(void) +{ + unsigned long base, size; + + if (!initial_boot_params) + return; + + base = virt_to_phys((void *)initial_boot_params); + size = be32_to_cpu(initial_boot_params->totalsize); + + /* Before we do anything, lets reserve the dt blob */ + reserve_bootmem(base, size, BOOTMEM_DEFAULT); + + unflatten_device_tree(); } diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c index 048e781..239e4e3 100644 --- a/arch/mips/mti-sead3/sead3-time.c +++ b/arch/mips/mti-sead3/sead3-time.c @@ -43,11 +43,11 @@ static unsigned int __init estimate_cpu_frequency(void) local_irq_save(flags); - orig = readl(status_reg) & 0x2; /* get original sample */ + orig = readl(status_reg) & 0x2; /* get original sample */ /* wait for transition */ while ((readl(status_reg) & 0x2) == orig) ; - orig = orig ^ 0x2; /* flip the bit */ + orig = orig ^ 0x2; /* flip the bit */ write_c0_count(0); @@ -56,7 +56,7 @@ static unsigned int __init estimate_cpu_frequency(void) /* wait for transition */ while ((readl(status_reg) & 0x2) == orig) ; - orig = orig ^ 0x2; /* flip the bit */ + orig = orig ^ 0x2; /* flip the bit */ tick++; } @@ -71,7 +71,7 @@ static unsigned int __init estimate_cpu_frequency(void) (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) freq *= 2; - freq += 5000; /* rounding */ + freq += 5000; /* rounding */ freq -= freq%10000; return freq ; diff --git a/arch/mips/mti-sead3/sead3.dts b/arch/mips/mti-sead3/sead3.dts new file mode 100644 index 0000000..658f437 --- /dev/null +++ b/arch/mips/mti-sead3/sead3.dts @@ -0,0 +1,26 @@ +/dts-v1/; + +/memreserve/ 0x00000000 0x00001000; // reserved +/memreserve/ 0x00001000 0x000ef000; // ROM data +/memreserve/ 0x000f0000 0x004cc000; // reserved + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mti,sead-3"; + + cpus { + cpu@0 { + compatible = "mti,mips14KEc", "mti,mips14Kc"; + }; + }; + + chosen { + bootargs = "console=ttyS1,38400 rootdelay=10 root=/dev/sda3"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform index cdfc9ab..fb8eb4c 100644 --- a/arch/mips/netlogic/Platform +++ b/arch/mips/netlogic/Platform @@ -13,5 +13,5 @@ cflags-$(CONFIG_CPU_XLP) += $(call cc-option,-march=xlp,-march=mips64r2) # # NETLOGIC processor support # -platform-$(CONFIG_NLM_COMMON) += netlogic/ -load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000 +platform-$(CONFIG_NLM_COMMON) += netlogic/ +load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000 diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c index 00dcc7a..9f84c60 100644 --- a/arch/mips/netlogic/common/irq.c +++ b/arch/mips/netlogic/common/irq.c @@ -69,7 +69,7 @@ #else #define SMP_IRQ_MASK 0 #endif -#define PERCPU_IRQ_MASK (SMP_IRQ_MASK | (1ull << IRQ_TIMER) | \ +#define PERCPU_IRQ_MASK (SMP_IRQ_MASK | (1ull << IRQ_TIMER) | \ (1ull << IRQ_FMN)) struct nlm_pic_irq { @@ -105,21 +105,23 @@ static void xlp_pic_disable(struct irq_data *d) static void xlp_pic_mask_ack(struct irq_data *d) { struct nlm_pic_irq *pd = irq_data_get_irq_handler_data(d); - uint64_t mask = 1ull << pd->picirq; - write_c0_eirr(mask); /* ack by writing EIRR */ + clear_c0_eimr(pd->picirq); + ack_c0_eirr(pd->picirq); } static void xlp_pic_unmask(struct irq_data *d) { struct nlm_pic_irq *pd = irq_data_get_irq_handler_data(d); - if (!pd) - return; + BUG_ON(!pd); if (pd->extra_ack) pd->extra_ack(d); + /* re-enable the intr on this cpu */ + set_c0_eimr(pd->picirq); + /* Ack is a single write, no need to lock */ nlm_pic_ack(pd->node->picbase, pd->irt); } @@ -134,32 +136,17 @@ static struct irq_chip xlp_pic = { static void cpuintr_disable(struct irq_data *d) { - uint64_t eimr; - uint64_t mask = 1ull << d->irq; - - eimr = read_c0_eimr(); - write_c0_eimr(eimr & ~mask); + clear_c0_eimr(d->irq); } static void cpuintr_enable(struct irq_data *d) { - uint64_t eimr; - uint64_t mask = 1ull << d->irq; - - eimr = read_c0_eimr(); - write_c0_eimr(eimr | mask); + set_c0_eimr(d->irq); } static void cpuintr_ack(struct irq_data *d) { - uint64_t mask = 1ull << d->irq; - - write_c0_eirr(mask); -} - -static void cpuintr_nop(struct irq_data *d) -{ - WARN(d->irq >= PIC_IRQ_BASE, "Bad irq %d", d->irq); + ack_c0_eirr(d->irq); } /* @@ -170,9 +157,9 @@ struct irq_chip nlm_cpu_intr = { .name = "XLP-CPU-INTR", .irq_enable = cpuintr_enable, .irq_disable = cpuintr_disable, - .irq_mask = cpuintr_nop, - .irq_ack = cpuintr_nop, - .irq_eoi = cpuintr_ack, + .irq_mask = cpuintr_disable, + .irq_ack = cpuintr_ack, + .irq_eoi = cpuintr_enable, }; static void __init nlm_init_percpu_irqs(void) @@ -230,7 +217,7 @@ static void nlm_init_node_irqs(int node) nlm_setup_pic_irq(node, i, i, irt); /* set interrupts to first cpu in node */ nlm_pic_init_irt(nodep->picbase, irt, i, - node * NLM_CPUS_PER_NODE); + node * NLM_CPUS_PER_NODE, 0); irqmask |= (1ull << i); } nodep->irqmask = irqmask; @@ -265,7 +252,7 @@ asmlinkage void plat_irq_dispatch(void) int i, node; node = nlm_nodeid(); - eirr = read_c0_eirr() & read_c0_eimr(); + eirr = read_c0_eirr_and_eimr(); i = __ilog2_u64(eirr); if (i == -1) diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c index a080d9e..2bb95dcf 100644 --- a/arch/mips/netlogic/common/smp.c +++ b/arch/mips/netlogic/common/smp.c @@ -84,15 +84,19 @@ void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action) /* IRQ_IPI_SMP_FUNCTION Handler */ void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc) { - write_c0_eirr(1ull << irq); + clear_c0_eimr(irq); + ack_c0_eirr(irq); smp_call_function_interrupt(); + set_c0_eimr(irq); } /* IRQ_IPI_SMP_RESCHEDULE handler */ void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc) { - write_c0_eirr(1ull << irq); + clear_c0_eimr(irq); + ack_c0_eirr(irq); scheduler_ipi(); + set_c0_eimr(irq); } /* diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S index a0b7487..0265174 100644 --- a/arch/mips/netlogic/common/smpboot.S +++ b/arch/mips/netlogic/common/smpboot.S @@ -49,12 +49,12 @@ #include <asm/netlogic/xlp-hal/sys.h> #include <asm/netlogic/xlp-hal/cpucontrol.h> -#define CP0_EBASE $15 +#define CP0_EBASE $15 #define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \ XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \ SYS_CPU_NONCOHERENT_MODE * 4 -#define XLP_AX_WORKAROUND /* enable Ax silicon workarounds */ +#define XLP_AX_WORKAROUND /* enable Ax silicon workarounds */ /* Enable XLP features and workarounds in the LSU */ .macro xlp_config_lsu @@ -69,6 +69,12 @@ #endif mtcr t1, t0 + li t0, ICU_DEFEATURE + mfcr t1, t0 + ori t1, 0x1000 /* Enable Icache partitioning */ + mtcr t1, t0 + + #ifdef XLP_AX_WORKAROUND li t0, SCHED_DEFEATURE lui t1, 0x0100 /* Disable BRU accepting ALU ops */ @@ -85,7 +91,7 @@ li t0, LSU_DEBUG_DATA0 li t1, LSU_DEBUG_ADDR li t2, 0 /* index */ - li t3, 0x1000 /* loop count */ + li t3, 0x1000 /* loop count */ 1: sll v0, t2, 5 mtcr zero, t0 @@ -134,7 +140,7 @@ FEXPORT(nlm_reset_entry) and k1, k0, k1 beqz k1, 1f /* go to real reset entry */ nop - li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */ + li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */ ld k0, BOOT_NMI_HANDLER(k1) jr k0 nop @@ -235,7 +241,7 @@ EXPORT(nlm_reset_entry_end) FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */ xlp_config_lsu - dmtc0 sp, $4, 2 /* SP saved in UserLocal */ + dmtc0 sp, $4, 2 /* SP saved in UserLocal */ SAVE_ALL sync /* find the location to which nlm_boot_siblings was relocated */ @@ -301,13 +307,13 @@ NESTED(nlm_rmiboot_preboot, 16, sp) */ li t0, 0x400 mfcr t1, t0 - li t2, 6 /* XLR thread mode mask */ + li t2, 6 /* XLR thread mode mask */ nor t3, t2, zero and t2, t1, t2 /* t2 - current thread mode */ li v0, CKSEG1ADDR(RESET_DATA_PHYS) lw v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */ sll v1, 1 - beq v1, t2, 1f /* same as request value */ + beq v1, t2, 1f /* same as request value */ nop /* nothing to do */ and t2, t1, t3 /* mask out old thread mode */ diff --git a/arch/mips/netlogic/common/time.c b/arch/mips/netlogic/common/time.c index bd3e498..5c56555 100644 --- a/arch/mips/netlogic/common/time.c +++ b/arch/mips/netlogic/common/time.c @@ -35,17 +35,73 @@ #include <linux/init.h> #include <asm/time.h> +#include <asm/cpu-features.h> + #include <asm/netlogic/interrupt.h> #include <asm/netlogic/common.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> + +#if defined(CONFIG_CPU_XLP) +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/pic.h> +#elif defined(CONFIG_CPU_XLR) +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> +#else +#error "Unknown CPU" +#endif unsigned int __cpuinit get_c0_compare_int(void) { return IRQ_TIMER; } +static cycle_t nlm_get_pic_timer(struct clocksource *cs) +{ + uint64_t picbase = nlm_get_node(0)->picbase; + + return ~nlm_pic_read_timer(picbase, PIC_CLOCK_TIMER); +} + +static cycle_t nlm_get_pic_timer32(struct clocksource *cs) +{ + uint64_t picbase = nlm_get_node(0)->picbase; + + return ~nlm_pic_read_timer32(picbase, PIC_CLOCK_TIMER); +} + +static struct clocksource csrc_pic = { + .name = "PIC", + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void nlm_init_pic_timer(void) +{ + uint64_t picbase = nlm_get_node(0)->picbase; + + nlm_pic_set_timer(picbase, PIC_CLOCK_TIMER, ~0ULL, 0, 0); + if (current_cpu_data.cputype == CPU_XLR) { + csrc_pic.mask = CLOCKSOURCE_MASK(32); + csrc_pic.read = nlm_get_pic_timer32; + } else { + csrc_pic.mask = CLOCKSOURCE_MASK(64); + csrc_pic.read = nlm_get_pic_timer; + } + csrc_pic.rating = 1000; + clocksource_register_hz(&csrc_pic, PIC_CLK_HZ); +} + void __init plat_time_init(void) { + nlm_init_pic_timer(); mips_hpt_frequency = nlm_get_cpu_frequency(); + if (current_cpu_type() == CPU_XLR) + preset_lpj = mips_hpt_frequency / (3 * HZ); + else + preset_lpj = mips_hpt_frequency / (2 * HZ); pr_info("MIPS counter frequency [%ld]\n", (unsigned long)mips_hpt_frequency); } diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts index e14f423..7628b54 100644 --- a/arch/mips/netlogic/dts/xlp_evp.dts +++ b/arch/mips/netlogic/dts/xlp_evp.dts @@ -20,7 +20,7 @@ #address-cells = <2>; #size-cells = <1>; compatible = "simple-bus"; - ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG 1 0 0 0x16000000 0x01000000>; // GBU chipselects serial0: serial@30000 { diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c index 529e747..c68fd40 100644 --- a/arch/mips/netlogic/xlp/nlm_hal.c +++ b/arch/mips/netlogic/xlp/nlm_hal.c @@ -111,8 +111,8 @@ unsigned int nlm_get_core_frequency(int node, int core) dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE); pll_divf = ((rstval >> 10) & 0x7f) + 1; pll_divr = ((rstval >> 8) & 0x3) + 1; - ext_div = ((rstval >> 30) & 0x3) + 1; - dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1; + ext_div = ((rstval >> 30) & 0x3) + 1; + dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1; num = 800000000ULL * pll_divf; denom = 3 * pll_divr * ext_div * dfs_div; diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c index dbe083a..1d0b66c 100644 --- a/arch/mips/netlogic/xlp/usb-init.c +++ b/arch/mips/netlogic/xlp/usb-init.c @@ -52,7 +52,7 @@ static void nlm_usb_intr_en(int node, int port) port_addr = nlm_get_usb_regbase(node, port); val = nlm_read_usb_reg(port_addr, USB_INT_EN); val = USB_CTRL_INTERRUPT_EN | USB_OHCI_INTERRUPT_EN | - USB_OHCI_INTERRUPT1_EN | USB_CTRL_INTERRUPT_EN | + USB_OHCI_INTERRUPT1_EN | USB_CTRL_INTERRUPT_EN | USB_OHCI_INTERRUPT_EN | USB_OHCI_INTERRUPT2_EN; nlm_write_usb_reg(port_addr, USB_INT_EN, val); } diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c index cb90106..abb3e08 100644 --- a/arch/mips/netlogic/xlp/wakeup.c +++ b/arch/mips/netlogic/xlp/wakeup.c @@ -51,7 +51,7 @@ #include <asm/netlogic/xlp-hal/xlp.h> #include <asm/netlogic/xlp-hal/sys.h> -static int xlp_wakeup_core(uint64_t sysbase, int core) +static int xlp_wakeup_core(uint64_t sysbase, int node, int core) { uint32_t coremask, value; int count; @@ -82,36 +82,51 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask) struct nlm_soc_info *nodep; uint64_t syspcibase; uint32_t syscoremask; - int core, n, cpu; + int core, n, cpu, count, val; for (n = 0; n < NLM_NR_NODES; n++) { syspcibase = nlm_get_sys_pcibase(n); if (nlm_read_reg(syspcibase, 0) == 0xffffffff) break; - /* read cores in reset from SYS and account for boot cpu */ - nlm_node_init(n); + /* read cores in reset from SYS */ + if (n != 0) + nlm_node_init(n); nodep = nlm_get_node(n); syscoremask = nlm_read_sys_reg(nodep->sysbase, SYS_CPU_RESET); - if (n == 0) + /* The boot cpu */ + if (n == 0) { syscoremask |= 1; + nodep->coremask = 1; + } for (core = 0; core < NLM_CORES_PER_NODE; core++) { + /* we will be on node 0 core 0 */ + if (n == 0 && core == 0) + continue; + /* see if the core exists */ if ((syscoremask & (1 << core)) == 0) continue; - /* see if at least the first thread is enabled */ + /* see if at least the first hw thread is enabled */ cpu = (n * NLM_CORES_PER_NODE + core) * NLM_THREADS_PER_CORE; if (!cpumask_test_cpu(cpu, wakeup_mask)) continue; /* wake up the core */ - if (xlp_wakeup_core(nodep->sysbase, core)) - nodep->coremask |= 1u << core; - else - pr_err("Failed to enable core %d\n", core); + if (!xlp_wakeup_core(nodep->sysbase, n, core)) + continue; + + /* core is up */ + nodep->coremask |= 1u << core; + + /* spin until the first hw thread sets its ready */ + count = 0x20000000; + do { + val = *(volatile int *)&nlm_cpu_ready[cpu]; + } while (val == 0 && --count > 0); } } } diff --git a/arch/mips/netlogic/xlr/fmn-config.c b/arch/mips/netlogic/xlr/fmn-config.c index bed2cff..ed3bf0e 100644 --- a/arch/mips/netlogic/xlr/fmn-config.c +++ b/arch/mips/netlogic/xlr/fmn-config.c @@ -164,8 +164,8 @@ static void setup_cpu_fmninfo(struct xlr_fmn_info *cpu, int num_core) int i, j; for (i = 0; i < num_core; i++) { - cpu[i].start_stn_id = (8 * i); - cpu[i].end_stn_id = (8 * i + 8); + cpu[i].start_stn_id = (8 * i); + cpu[i].end_stn_id = (8 * i + 8); for (j = cpu[i].start_stn_id; j < cpu[i].end_stn_id; j++) xlr_board_fmn_config.bucket_size[j] = 32; @@ -216,6 +216,8 @@ void xlr_board_info_setup(void) case PRID_IMP_NETLOGIC_XLS404B: case PRID_IMP_NETLOGIC_XLS408B: case PRID_IMP_NETLOGIC_XLS416B: + case PRID_IMP_NETLOGIC_XLS608B: + case PRID_IMP_NETLOGIC_XLS616B: setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, FMN_STNID_GMAC0_TX3, 8, 8, 32); setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0, diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c index 340ab16..6d3c727 100644 --- a/arch/mips/netlogic/xlr/platform-flash.c +++ b/arch/mips/netlogic/xlr/platform-flash.c @@ -36,7 +36,7 @@ static struct mtd_partition xlr_nor_parts[] = { { .name = "User FS", .offset = 0x800000, - .size = MTDPART_SIZ_FULL, + .size = MTDPART_SIZ_FULL, } }; @@ -46,13 +46,13 @@ static struct mtd_partition xlr_nor_parts[] = { static struct mtd_partition xlr_nand_parts[] = { { .name = "Root Filesystem", - .offset = 64 * 64 * 2048, + .offset = 64 * 64 * 2048, .size = 432 * 64 * 2048, }, { .name = "Home Filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, }, }; @@ -74,8 +74,8 @@ static struct platform_device xlr_nor_dev = { .dev = { .platform_data = &xlr_nor_data, }, - .num_resources = ARRAY_SIZE(xlr_nor_res), - .resource = xlr_nor_res, + .num_resources = ARRAY_SIZE(xlr_nor_res), + .resource = xlr_nor_res, }; const char *xlr_part_probes[] = { "cmdlinepart", NULL }; diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c index 507230e..7b96a91 100644 --- a/arch/mips/netlogic/xlr/platform.c +++ b/arch/mips/netlogic/xlr/platform.c @@ -64,7 +64,7 @@ void nlm_xlr_uart_out(struct uart_port *p, int offset, int value) .iotype = UPIO_MEM32, \ .flags = (UPF_SKIP_TEST | \ UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\ - .uartclk = PIC_CLKS_PER_SEC, \ + .uartclk = PIC_CLK_HZ, \ .type = PORT_16550A, \ .serial_in = nlm_xlr_uart_in, \ .serial_out = nlm_xlr_uart_out, \ @@ -162,18 +162,18 @@ int xls_platform_usb_init(void) nlm_write_reg(usb_mmio, 50, 0x1f000000); /* Enable ports */ - nlm_write_reg(usb_mmio, 1, 0x07000500); + nlm_write_reg(usb_mmio, 1, 0x07000500); val = nlm_read_reg(gpio_mmio, 21); if (((val >> 22) & 0x01) == 0) { pr_info("Detected USB Device mode - Not supported!\n"); - nlm_write_reg(usb_mmio, 0, 0x01000000); + nlm_write_reg(usb_mmio, 0, 0x01000000); return 0; } pr_info("Detected USB Host mode - Adding XLS USB devices.\n"); /* Clear reset, host mode */ - nlm_write_reg(usb_mmio, 0, 0x02000000); + nlm_write_reg(usb_mmio, 0, 0x02000000); /* Memory resource for various XLS usb ports */ usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET); @@ -221,8 +221,8 @@ static struct resource i2c_resources[] = { }; static struct platform_device nlm_xlr_i2c_1 = { - .name = "xlr-i2cbus", - .id = 1, + .name = "xlr-i2cbus", + .id = 1, .num_resources = 1, .resource = i2c_resources, }; diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c index c5ce699..e3e0941 100644 --- a/arch/mips/netlogic/xlr/setup.c +++ b/arch/mips/netlogic/xlr/setup.c @@ -70,7 +70,7 @@ static void __init nlm_early_serial_setup(void) s.iotype = UPIO_MEM32; s.regshift = 2; s.irq = PIC_UART_0_IRQ; - s.uartclk = PIC_CLKS_PER_SEC; + s.uartclk = PIC_CLK_HZ; s.serial_in = nlm_xlr_uart_in; s.serial_out = nlm_xlr_uart_out; s.mapbase = uart_base; @@ -163,7 +163,7 @@ static void prom_add_memory(void) { struct nlm_boot_mem_map *bootm; u64 start, size; - u64 pref_backup = 512; /* avoid pref walking beyond end */ + u64 pref_backup = 512; /* avoid pref walking beyond end */ int i; bootm = (void *)(long)nlm_prom_info.psb_mem_map; diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index e32db1f..af763e8 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -27,10 +27,10 @@ static int op_mips_setup(void) /* Pre-compute the values to stuff in the hardware registers. */ model->reg_setup(ctr); - /* Configure the registers on all cpus. */ + /* Configure the registers on all cpus. */ on_each_cpu(model->cpu_setup, NULL, 1); - return 0; + return 0; } static int op_mips_create_files(struct super_block *sb, struct dentry *root) @@ -78,6 +78,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) switch (current_cpu_type()) { case CPU_5KC: case CPU_M14KC: + case CPU_M14KEC: case CPU_20KC: case CPU_24K: case CPU_25KF: @@ -110,7 +111,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ops->create_files = op_mips_create_files; ops->setup = op_mips_setup; - //ops->shutdown = op_mips_shutdown; + //ops->shutdown = op_mips_shutdown; ops->start = op_mips_start; ops->stop = op_mips_stop; ops->cpu_type = lmodel->cpu_type; diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c index 60d3ea6..b249ec0 100644 --- a/arch/mips/oprofile/op_model_loongson2.c +++ b/arch/mips/oprofile/op_model_loongson2.c @@ -18,13 +18,13 @@ #define LOONGSON2_CPU_TYPE "mips/loongson2" -#define LOONGSON2_PERFCNT_OVERFLOW (1ULL << 31) +#define LOONGSON2_PERFCNT_OVERFLOW (1ULL << 31) #define LOONGSON2_PERFCTRL_EXL (1UL << 0) -#define LOONGSON2_PERFCTRL_KERNEL (1UL << 1) -#define LOONGSON2_PERFCTRL_SUPERVISOR (1UL << 2) -#define LOONGSON2_PERFCTRL_USER (1UL << 3) -#define LOONGSON2_PERFCTRL_ENABLE (1UL << 4) +#define LOONGSON2_PERFCTRL_KERNEL (1UL << 1) +#define LOONGSON2_PERFCTRL_SUPERVISOR (1UL << 2) +#define LOONGSON2_PERFCTRL_USER (1UL << 3) +#define LOONGSON2_PERFCTRL_ENABLE (1UL << 4) #define LOONGSON2_PERFCTRL_EVENT(idx, event) \ (((event) & 0x0f) << ((idx) ? 9 : 5)) diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index 7862546..1fd3614 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -14,25 +14,25 @@ #include "op_impl.h" -#define M_PERFCTL_EXL (1UL << 0) -#define M_PERFCTL_KERNEL (1UL << 1) -#define M_PERFCTL_SUPERVISOR (1UL << 2) -#define M_PERFCTL_USER (1UL << 3) -#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4) +#define M_PERFCTL_EXL (1UL << 0) +#define M_PERFCTL_KERNEL (1UL << 1) +#define M_PERFCTL_SUPERVISOR (1UL << 2) +#define M_PERFCTL_USER (1UL << 3) +#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4) #define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5) -#define M_PERFCTL_VPEID(vpe) ((vpe) << 16) +#define M_PERFCTL_VPEID(vpe) ((vpe) << 16) #define M_PERFCTL_MT_EN(filter) ((filter) << 20) -#define M_TC_EN_ALL M_PERFCTL_MT_EN(0) -#define M_TC_EN_VPE M_PERFCTL_MT_EN(1) -#define M_TC_EN_TC M_PERFCTL_MT_EN(2) -#define M_PERFCTL_TCID(tcid) ((tcid) << 22) -#define M_PERFCTL_WIDE (1UL << 30) -#define M_PERFCTL_MORE (1UL << 31) +#define M_TC_EN_ALL M_PERFCTL_MT_EN(0) +#define M_TC_EN_VPE M_PERFCTL_MT_EN(1) +#define M_TC_EN_TC M_PERFCTL_MT_EN(2) +#define M_PERFCTL_TCID(tcid) ((tcid) << 22) +#define M_PERFCTL_WIDE (1UL << 30) +#define M_PERFCTL_MORE (1UL << 31) -#define M_COUNTER_OVERFLOW (1UL << 31) +#define M_COUNTER_OVERFLOW (1UL << 31) /* Netlogic XLR specific, count events in all threads in a core */ -#define M_PERFCTL_COUNT_ALL_THREADS (1UL << 13) +#define M_PERFCTL_COUNT_ALL_THREADS (1UL << 13) static int (*save_perf_irq)(void); @@ -143,7 +143,7 @@ static struct mipsxx_register_config { unsigned int counter[4]; } reg; -/* Compute all of the registers in preparation for enabling profiling. */ +/* Compute all of the registers in preparation for enabling profiling. */ static void mipsxx_reg_setup(struct op_counter_config *ctr) { @@ -159,7 +159,7 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr) continue; reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) | - M_PERFCTL_INTERRUPT_ENABLE; + M_PERFCTL_INTERRUPT_ENABLE; if (ctr[i].kernel) reg.control[i] |= M_PERFCTL_KERNEL; if (ctr[i].user) @@ -172,7 +172,7 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr) } } -/* Program all of the registers in preparation for enabling profiling. */ +/* Program all of the registers in preparation for enabling profiling. */ static void mipsxx_cpu_setup(void *args) { @@ -351,6 +351,10 @@ static int __init mipsxx_init(void) op_model_mipsxx_ops.cpu_type = "mips/M14Kc"; break; + case CPU_M14KEC: + op_model_mipsxx_ops.cpu_type = "mips/M14KEc"; + break; + case CPU_20KC: op_model_mipsxx_ops.cpu_type = "mips/20K"; break; diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index ce995d3..2cb1d31 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o # obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o -obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o @@ -55,10 +54,10 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o -obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o +obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o obj-$(CONFIG_CPU_XLR) += pci-xlr.o obj-$(CONFIG_CPU_XLP) += pci-xlp.o ifdef CONFIG_PCI_MSI -obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o +obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o endif diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index 9553b14..a138e8e 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -94,14 +94,14 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x-- * * On all machines prior to Q2, we had the STOP line disconnected - * from Galileo to VIA on PCI. The new Galileo does not function + * from Galileo to VIA on PCI. The new Galileo does not function * correctly unless we have it connected. * * Therefore we must set the disconnect/retry cycle values to * something sensible when using the new Galileo. */ - printk(KERN_INFO "Galileo: revision %u\n", dev->revision); + printk(KERN_INFO "Galileo: revision %u\n", dev->revision); #if 0 if (dev->revision >= 0x10) { @@ -149,30 +149,30 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, qube_raq_via_board_id_fixup); static char irq_tab_qube1[] __initdata = { - [COBALT_PCICONF_CPU] = 0, - [COBALT_PCICONF_ETH0] = QUBE1_ETH0_IRQ, + [COBALT_PCICONF_CPU] = 0, + [COBALT_PCICONF_ETH0] = QUBE1_ETH0_IRQ, [COBALT_PCICONF_RAQSCSI] = SCSI_IRQ, - [COBALT_PCICONF_VIA] = 0, + [COBALT_PCICONF_VIA] = 0, [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ, - [COBALT_PCICONF_ETH1] = 0 + [COBALT_PCICONF_ETH1] = 0 }; static char irq_tab_cobalt[] __initdata = { - [COBALT_PCICONF_CPU] = 0, - [COBALT_PCICONF_ETH0] = ETH0_IRQ, + [COBALT_PCICONF_CPU] = 0, + [COBALT_PCICONF_ETH0] = ETH0_IRQ, [COBALT_PCICONF_RAQSCSI] = SCSI_IRQ, - [COBALT_PCICONF_VIA] = 0, + [COBALT_PCICONF_VIA] = 0, [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ, - [COBALT_PCICONF_ETH1] = ETH1_IRQ + [COBALT_PCICONF_ETH1] = ETH1_IRQ }; static char irq_tab_raq2[] __initdata = { - [COBALT_PCICONF_CPU] = 0, - [COBALT_PCICONF_ETH0] = ETH0_IRQ, + [COBALT_PCICONF_CPU] = 0, + [COBALT_PCICONF_ETH0] = ETH0_IRQ, [COBALT_PCICONF_RAQSCSI] = RAQ2_SCSI_IRQ, - [COBALT_PCICONF_VIA] = 0, + [COBALT_PCICONF_VIA] = 0, [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ, - [COBALT_PCICONF_ETH1] = ETH1_IRQ + [COBALT_PCICONF_ETH1] = ETH1_IRQ }; int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c index beaec32..19caf77 100644 --- a/arch/mips/pci/fixup-emma2rh.c +++ b/arch/mips/pci/fixup-emma2rh.c @@ -42,7 +42,7 @@ * */ -#define MAX_SLOT_NUM 10 +#define MAX_SLOT_NUM 10 static unsigned char irq_map[][5] __initdata = { [3] = {0, MARKEINS_PCI_IRQ_INTB, MARKEINS_PCI_IRQ_INTC, MARKEINS_PCI_IRQ_INTD, 0,}, diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c index 63ab4a0..50da773 100644 --- a/arch/mips/pci/fixup-fuloong2e.c +++ b/arch/mips/pci/fixup-fuloong2e.c @@ -6,9 +6,9 @@ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include <linux/init.h> @@ -152,7 +152,7 @@ static void loongson2e_686b_func1_fixup(struct pci_dev *pdev) /* disable read prefetch/write post buffers */ pci_write_config_byte(pdev, 0x41, 0x02); - /* use 3/4 as fifo thresh hold */ + /* use 3/4 as fifo thresh hold */ pci_write_config_byte(pdev, 0x43, 0x0a); pci_write_config_byte(pdev, 0x44, 0x00); diff --git a/arch/mips/pci/fixup-ip32.c b/arch/mips/pci/fixup-ip32.c index 190fffd..133685e 100644 --- a/arch/mips/pci/fixup-ip32.c +++ b/arch/mips/pci/fixup-ip32.c @@ -22,13 +22,13 @@ #define INTC MACEPCI_SHARED1_IRQ #define INTD MACEPCI_SHARED2_IRQ static char irq_tab_mace[][5] __initdata = { - /* Dummy INT#A INT#B INT#C INT#D */ - {0, 0, 0, 0, 0}, /* This is placeholder row - never used */ - {0, SCSI0, SCSI0, SCSI0, SCSI0}, - {0, SCSI1, SCSI1, SCSI1, SCSI1}, - {0, INTA0, INTB, INTC, INTD}, - {0, INTA1, INTC, INTD, INTB}, - {0, INTA2, INTD, INTB, INTC}, + /* Dummy INT#A INT#B INT#C INT#D */ + {0, 0, 0, 0, 0}, /* This is placeholder row - never used */ + {0, SCSI0, SCSI0, SCSI0, SCSI0}, + {0, SCSI1, SCSI1, SCSI1, SCSI1}, + {0, INTA0, INTB, INTC, INTD}, + {0, INTA1, INTC, INTD, INTB}, + {0, INTA2, INTD, INTB, INTC}, }; diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c index 519daaebb..95ab9a1 100644 --- a/arch/mips/pci/fixup-lemote2f.c +++ b/arch/mips/pci/fixup-lemote2f.c @@ -31,7 +31,7 @@ /* all the pci device has the PCIA pin, check the datasheet. */ static char irq_tab[][5] __initdata = { - /* INTA INTB INTC INTD */ + /* INTA INTB INTC INTD */ {0, 0, 0, 0, 0}, /* 11: Unused */ {0, 0, 0, 0, 0}, /* 12: Unused */ {0, 0, 0, 0, 0}, /* 13: Unused */ @@ -69,15 +69,15 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) case 2: pci_write_config_byte(dev, PCI_INTERRUPT_LINE, CS5536_IDE_INTR); - return CS5536_IDE_INTR; /* for IDE */ + return CS5536_IDE_INTR; /* for IDE */ case 3: pci_write_config_byte(dev, PCI_INTERRUPT_LINE, CS5536_ACC_INTR); - return CS5536_ACC_INTR; /* for AUDIO */ - case 4: /* for OHCI */ - case 5: /* for EHCI */ - case 6: /* for UDC */ - case 7: /* for OTG */ + return CS5536_ACC_INTR; /* for AUDIO */ + case 4: /* for OHCI */ + case 5: /* for EHCI */ + case 6: /* for UDC */ + case 7: /* for OTG */ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, CS5536_USB_INTR); return CS5536_USB_INTR; diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c index 75d03f6..07ada7f 100644 --- a/arch/mips/pci/fixup-malta.c +++ b/arch/mips/pci/fixup-malta.c @@ -12,7 +12,7 @@ static char pci_irq[5] = { }; static char irq_tab[][5] __initdata = { - /* INTA INTB INTC INTD */ + /* INTA INTB INTC INTD */ {0, 0, 0, 0, 0 }, /* 0: GT64120 PCI bridge */ {0, 0, 0, 0, 0 }, /* 1: Unused */ {0, 0, 0, 0, 0 }, /* 2: Unused */ @@ -23,7 +23,7 @@ static char irq_tab[][5] __initdata = { {0, 0, 0, 0, 0 }, /* 7: Unused */ {0, 0, 0, 0, 0 }, /* 8: Unused */ {0, 0, 0, 0, 0 }, /* 9: Unused */ - {0, 0, 0, 0, PCID }, /* 10: PIIX4 USB */ + {0, 0, 0, 0, PCID }, /* 10: PIIX4 USB */ {0, PCIB, 0, 0, 0 }, /* 11: AMD 79C973 Ethernet */ {0, PCIC, 0, 0, 0 }, /* 12: Crystal 4281 Sound */ {0, 0, 0, 0, 0 }, /* 13: Unused */ @@ -31,9 +31,9 @@ static char irq_tab[][5] __initdata = { {0, 0, 0, 0, 0 }, /* 15: Unused */ {0, 0, 0, 0, 0 }, /* 16: Unused */ {0, 0, 0, 0, 0 }, /* 17: Bonito/SOC-it PCI Bridge*/ - {0, PCIA, PCIB, PCIC, PCID }, /* 18: PCI Slot 1 */ - {0, PCIB, PCIC, PCID, PCIA }, /* 19: PCI Slot 2 */ - {0, PCIC, PCID, PCIA, PCIB }, /* 20: PCI Slot 3 */ + {0, PCIA, PCIB, PCIC, PCID }, /* 18: PCI Slot 1 */ + {0, PCIB, PCIC, PCID, PCIA }, /* 19: PCI Slot 2 */ + {0, PCIC, PCID, PCIA, PCIB }, /* 20: PCI Slot 3 */ {0, PCID, PCIA, PCIB, PCIC } /* 21: PCI Slot 4 */ }; @@ -54,8 +54,8 @@ static void malta_piix_func0_fixup(struct pci_dev *pdev) { unsigned char reg_val; static int piixirqmap[16] = { /* PIIX PIRQC[A:D] irq mappings */ - 0, 0, 0, 3, - 4, 5, 6, 7, + 0, 0, 0, 3, + 4, 5, 6, 7, 0, 9, 10, 11, 12, 0, 14, 15 }; diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c index 65735b1..fab405c 100644 --- a/arch/mips/pci/fixup-pmcmsp.c +++ b/arch/mips/pci/fixup-pmcmsp.c @@ -48,117 +48,117 @@ #if defined(CONFIG_PMC_MSP7120_GW) /* Garibaldi Board IRQ wiring to PCI slots */ static char irq_tab[][5] __initdata = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ - {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ - {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ - {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ - {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ - {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ - {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ - {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ - {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ - {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ - {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ - {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ - {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ - {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ - {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ - {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ - {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ - {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ - {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ - {0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */ - {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ - {0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */ - {0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */ + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ + {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ + {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ + {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ + {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ + {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ + {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ + {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ + {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ + {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ + {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ + {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ + {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ + {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ + {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ + {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ + {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ + {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ + {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ + {0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */ + {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ + {0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */ + {0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */ }; #elif defined(CONFIG_PMC_MSP7120_EVAL) /* MSP7120 Eval Board IRQ wiring to PCI slots */ static char irq_tab[][5] __initdata = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ - {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ - {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ - {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ - {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ - {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ - {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ - {0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */ - {0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */ - {0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */ - {0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */ - {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ - {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ - {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ - {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ - {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ - {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ - {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ - {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ - {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ - {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ - {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ - {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ + {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ + {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ + {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ + {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ + {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ + {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ + {0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */ + {0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */ + {0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */ + {0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */ + {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ + {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ + {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ + {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ + {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ + {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ + {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ + {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ + {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ + {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ + {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ + {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ }; #else /* Unknown board -- don't assign any IRQs */ static char irq_tab[][5] __initdata = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ - {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ - {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ - {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ - {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ - {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ - {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ - {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ - {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ - {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ - {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ - {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ - {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ - {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ - {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ - {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ - {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ - {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ - {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ - {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ - {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ - {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ - {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ + {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ + {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ + {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ + {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ + {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ + {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ + {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ + {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ + {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ + {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ + {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ + {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ + {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ + {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ + {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ + {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ + {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ + {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ + {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ + {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ + {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ + {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ + {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ }; #endif @@ -168,14 +168,14 @@ static char irq_tab[][5] __initdata = { * _________________________________________________________________________ * * DESCRIPTION: Perform platform specific device initialization at - * pci_enable_device() time. - * None are needed for the MSP7120 PCI Controller. + * pci_enable_device() time. + * None are needed for the MSP7120 PCI Controller. * - * INPUTS: dev - structure describing the PCI device + * INPUTS: dev - structure describing the PCI device * - * OUTPUTS: none + * OUTPUTS: none * - * RETURNS: PCIBIOS_SUCCESSFUL + * RETURNS: PCIBIOS_SUCCESSFUL * ****************************************************************************/ int pcibios_plat_dev_init(struct pci_dev *dev) @@ -190,16 +190,16 @@ int pcibios_plat_dev_init(struct pci_dev *dev) * * DESCRIPTION: Perform board supplied PCI IRQ mapping routine. * - * INPUTS: dev - unused - * slot - PCI slot. Identified by which bit of the AD[] bus - * drives the IDSEL line. AD[10] is 0, AD[31] is - * slot 21. - * pin - numbered using the scheme of the PCI_INTERRUPT_PIN - * field of the config header. + * INPUTS: dev - unused + * slot - PCI slot. Identified by which bit of the AD[] bus + * drives the IDSEL line. AD[10] is 0, AD[31] is + * slot 21. + * pin - numbered using the scheme of the PCI_INTERRUPT_PIN + * field of the config header. * - * OUTPUTS: none + * OUTPUTS: none * - * RETURNS: IRQ number + * RETURNS: IRQ number * ****************************************************************************/ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c deleted file mode 100644 index 96857ac..0000000 --- a/arch/mips/pci/fixup-pnx8550.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Philips PNX8550 pci fixups. - * - * Copyright 2005 Embedded Alley Solutions, Inc - * source@embeddealley.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/mach-pnx8550/pci.h> -#include <asm/mach-pnx8550/int.h> - - -#undef DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -extern char pnx8550_irq_tab[][5]; - -void __init pcibios_fixup_resources(struct pci_dev *dev) -{ - /* no need to fixup IO resources */ -} - -void __init pcibios_fixup(void) -{ - /* nothing to do here */ -} - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return pnx8550_irq_tab[slot][pin]; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c index 5c8a79b..f67ebee 100644 --- a/arch/mips/pci/fixup-sni.c +++ b/arch/mips/pci/fixup-sni.c @@ -41,12 +41,12 @@ * Logic CL-GD5434 VGA is device 3. */ static char irq_tab_rm200[8][5] __initdata = { - /* INTA INTB INTC INTD */ - { 0, 0, 0, 0, 0 }, /* EISA bridge */ + /* INTA INTB INTC INTD */ + { 0, 0, 0, 0, 0 }, /* EISA bridge */ { SCSI, SCSI, SCSI, SCSI, SCSI }, /* SCSI */ - { ETH, ETH, ETH, ETH, ETH }, /* Ethernet */ + { ETH, ETH, ETH, ETH, ETH }, /* Ethernet */ { INTB, INTB, INTB, INTB, INTB }, /* VGA */ - { 0, 0, 0, 0, 0 }, /* Unused */ + { 0, 0, 0, 0, 0 }, /* Unused */ { 0, INTB, INTC, INTD, INTA }, /* Slot 2 */ { 0, INTC, INTD, INTA, INTB }, /* Slot 3 */ { 0, INTD, INTA, INTB, INTC }, /* Slot 4 */ @@ -58,20 +58,20 @@ static char irq_tab_rm200[8][5] __initdata = { * The VGA card is optional for RM300 systems. */ static char irq_tab_rm300d[8][5] __initdata = { - /* INTA INTB INTC INTD */ - { 0, 0, 0, 0, 0 }, /* EISA bridge */ + /* INTA INTB INTC INTD */ + { 0, 0, 0, 0, 0 }, /* EISA bridge */ { SCSI, SCSI, SCSI, SCSI, SCSI }, /* SCSI */ { 0, INTC, INTD, INTA, INTB }, /* Slot 1 */ { INTB, INTB, INTB, INTB, INTB }, /* VGA */ - { 0, 0, 0, 0, 0 }, /* Unused */ + { 0, 0, 0, 0, 0 }, /* Unused */ { 0, INTB, INTC, INTD, INTA }, /* Slot 2 */ { 0, INTC, INTD, INTA, INTB }, /* Slot 3 */ { 0, INTD, INTA, INTB, INTC }, /* Slot 4 */ }; static char irq_tab_rm300e[5][5] __initdata = { - /* INTA INTB INTC INTD */ - { 0, 0, 0, 0, 0 }, /* HOST bridge */ + /* INTA INTB INTC INTD */ + { 0, 0, 0, 0, 0 }, /* HOST bridge */ { SCSI, SCSI, SCSI, SCSI, SCSI }, /* SCSI */ { 0, INTC, INTD, INTA, INTB }, /* Bridge/i960 */ { 0, INTD, INTA, INTB, INTC }, /* Slot 1 */ @@ -97,30 +97,30 @@ static char irq_tab_rm300e[5][5] __initdata = { #define INTD PCIT_IRQ_INTD static char irq_tab_pcit[13][5] __initdata = { - /* INTA INTB INTC INTD */ - { 0, 0, 0, 0, 0 }, /* HOST bridge */ + /* INTA INTB INTC INTD */ + { 0, 0, 0, 0, 0 }, /* HOST bridge */ { SCSI0, SCSI0, SCSI0, SCSI0, SCSI0 }, /* SCSI */ { SCSI1, SCSI1, SCSI1, SCSI1, SCSI1 }, /* SCSI */ - { ETH, ETH, ETH, ETH, ETH }, /* Ethernet */ - { 0, INTA, INTB, INTC, INTD }, /* PCI-PCI bridge */ - { 0, 0, 0, 0, 0 }, /* Unused */ - { 0, 0, 0, 0, 0 }, /* Unused */ - { 0, 0, 0, 0, 0 }, /* Unused */ - { 0, INTA, INTB, INTC, INTD }, /* Slot 1 */ - { 0, INTB, INTC, INTD, INTA }, /* Slot 2 */ - { 0, INTC, INTD, INTA, INTB }, /* Slot 3 */ - { 0, INTD, INTA, INTB, INTC }, /* Slot 4 */ - { 0, INTA, INTB, INTC, INTD }, /* Slot 5 */ + { ETH, ETH, ETH, ETH, ETH }, /* Ethernet */ + { 0, INTA, INTB, INTC, INTD }, /* PCI-PCI bridge */ + { 0, 0, 0, 0, 0 }, /* Unused */ + { 0, 0, 0, 0, 0 }, /* Unused */ + { 0, 0, 0, 0, 0 }, /* Unused */ + { 0, INTA, INTB, INTC, INTD }, /* Slot 1 */ + { 0, INTB, INTC, INTD, INTA }, /* Slot 2 */ + { 0, INTC, INTD, INTA, INTB }, /* Slot 3 */ + { 0, INTD, INTA, INTB, INTC }, /* Slot 4 */ + { 0, INTA, INTB, INTC, INTD }, /* Slot 5 */ }; static char irq_tab_pcit_cplus[13][5] __initdata = { - /* INTA INTB INTC INTD */ - { 0, 0, 0, 0, 0 }, /* HOST bridge */ - { 0, INTB, INTC, INTD, INTA }, /* PCI Slot 9 */ - { 0, 0, 0, 0, 0 }, /* PCI-EISA */ - { 0, 0, 0, 0, 0 }, /* Unused */ - { 0, INTA, INTB, INTC, INTD }, /* PCI-PCI bridge */ - { 0, INTB, INTC, INTD, INTA }, /* fixup */ + /* INTA INTB INTC INTD */ + { 0, 0, 0, 0, 0 }, /* HOST bridge */ + { 0, INTB, INTC, INTD, INTA }, /* PCI Slot 9 */ + { 0, 0, 0, 0, 0 }, /* PCI-EISA */ + { 0, 0, 0, 0, 0 }, /* Unused */ + { 0, INTA, INTB, INTC, INTD }, /* PCI-PCI bridge */ + { 0, INTB, INTC, INTD, INTA }, /* fixup */ }; static inline int is_rm300_revd(void) @@ -146,18 +146,18 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) } return irq_tab_pcit_cplus[slot][pin]; case SNI_BRD_PCI_TOWER: - return irq_tab_pcit[slot][pin]; + return irq_tab_pcit[slot][pin]; case SNI_BRD_PCI_MTOWER: - if (is_rm300_revd()) - return irq_tab_rm300d[slot][pin]; - /* fall through */ + if (is_rm300_revd()) + return irq_tab_rm300d[slot][pin]; + /* fall through */ case SNI_BRD_PCI_DESKTOP: - return irq_tab_rm200[slot][pin]; + return irq_tab_rm200[slot][pin]; case SNI_BRD_PCI_MTOWER_CPLUS: - return irq_tab_rm300e[slot][pin]; + return irq_tab_rm300e[slot][pin]; } return 0; diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c index 8084b17..d0b0083 100644 --- a/arch/mips/pci/fixup-tb0219.c +++ b/arch/mips/pci/fixup-tb0219.c @@ -1,7 +1,7 @@ /* * fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups. * - * Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp> + * Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp> * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c index 2fe29db..8c5039e 100644 --- a/arch/mips/pci/fixup-tb0287.c +++ b/arch/mips/pci/fixup-tb0287.c @@ -1,7 +1,7 @@ /* * fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups. * - * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pci/fixup-wrppmc.c b/arch/mips/pci/fixup-wrppmc.c index 3d27754..29737ed 100644 --- a/arch/mips/pci/fixup-wrppmc.c +++ b/arch/mips/pci/fixup-wrppmc.c @@ -20,7 +20,7 @@ #define PCI_SLOT_MAXNR 32 /* Each PCI bus has 32 physical slots */ static char pci_irq_tab[PCI_SLOT_MAXNR][5] __initdata = { - /* 0 INTA INTB INTC INTD */ + /* 0 INTA INTB INTC INTD */ [0] = {0, 0, 0, 0, 0}, /* Slot 0: GT64120 PCI bridge */ [6] = {0, WRPPMC_PCI_INTA_IRQ, 0, 0, 0}, }; diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c index 4a15662..6144bb3 100644 --- a/arch/mips/pci/ops-bcm63xx.c +++ b/arch/mips/pci/ops-bcm63xx.c @@ -174,8 +174,8 @@ static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn, } struct pci_ops bcm63xx_pci_ops = { - .read = bcm63xx_pci_read, - .write = bcm63xx_pci_write + .read = bcm63xx_pci_read, + .write = bcm63xx_pci_write }; #ifdef CONFIG_CARDBUS @@ -370,8 +370,8 @@ static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn, return fake_cb_bridge_read(where, size, val); } - /* a configuration cycle for the device behind the cardbus - * bridge is actually done as a type 0 cycle on the primary + /* a configuration cycle for the device behind the cardbus + * bridge is actually done as a type 0 cycle on the primary * bus. This means that only one device can be on the cardbus * bus */ if (fake_cb_bridge_regs.bus_assigned && @@ -403,8 +403,8 @@ static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn, } struct pci_ops bcm63xx_cb_ops = { - .read = bcm63xx_cb_read, - .write = bcm63xx_cb_write, + .read = bcm63xx_cb_read, + .write = bcm63xx_cb_write, }; /* @@ -523,6 +523,6 @@ static int bcm63xx_pcie_write(struct pci_bus *bus, unsigned int devfn, struct pci_ops bcm63xx_pcie_ops = { - .read = bcm63xx_pcie_read, - .write = bcm63xx_pcie_write + .read = bcm63xx_pcie_read, + .write = bcm63xx_pcie_write }; diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c index 1b3e03f..830352e 100644 --- a/arch/mips/pci/ops-bonito64.c +++ b/arch/mips/pci/ops-bonito64.c @@ -26,7 +26,7 @@ #include <asm/mips-boards/bonito64.h> -#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 #define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset)) @@ -137,7 +137,7 @@ static int bonito64_pcibios_write(struct pci_bus *bus, unsigned int devfn, data = val; else { if (bonito64_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) + where, &data)) return -1; if (size == 1) diff --git a/arch/mips/pci/ops-gt64xxx_pci0.c b/arch/mips/pci/ops-gt64xxx_pci0.c index 3d896c5..effcbda 100644 --- a/arch/mips/pci/ops-gt64xxx_pci0.c +++ b/arch/mips/pci/ops-gt64xxx_pci0.c @@ -23,21 +23,21 @@ #include <asm/gt64120.h> -#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 /* * PCI configuration cycle AD bus definition */ /* Type 0 */ -#define PCI_CFG_TYPE0_REG_SHF 0 -#define PCI_CFG_TYPE0_FUNC_SHF 8 +#define PCI_CFG_TYPE0_REG_SHF 0 +#define PCI_CFG_TYPE0_FUNC_SHF 8 /* Type 1 */ -#define PCI_CFG_TYPE1_REG_SHF 0 -#define PCI_CFG_TYPE1_FUNC_SHF 8 -#define PCI_CFG_TYPE1_DEV_SHF 11 -#define PCI_CFG_TYPE1_BUS_SHF 16 +#define PCI_CFG_TYPE1_REG_SHF 0 +#define PCI_CFG_TYPE1_FUNC_SHF 8 +#define PCI_CFG_TYPE1_DEV_SHF 11 +#define PCI_CFG_TYPE1_BUS_SHF 16 static int gt64xxx_pci0_pcibios_config_access(unsigned char access_type, struct pci_bus *bus, unsigned int devfn, int where, u32 * data) @@ -50,7 +50,7 @@ static int gt64xxx_pci0_pcibios_config_access(unsigned char access_type, /* Clear cause register bits */ GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | - GT_INTRCAUSE_TARABORT0_BIT)); + GT_INTRCAUSE_TARABORT0_BIT)); /* Setup address */ GT_WRITE(GT_PCI0_CFGADDR_OFS, @@ -87,7 +87,7 @@ static int gt64xxx_pci0_pcibios_config_access(unsigned char access_type, /* Clear bits */ GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | - GT_INTRCAUSE_TARABORT0_BIT)); + GT_INTRCAUSE_TARABORT0_BIT)); return -1; } @@ -106,7 +106,7 @@ static int gt64xxx_pci0_pcibios_read(struct pci_bus *bus, unsigned int devfn, u32 data = 0; if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) + where, &data)) return PCIBIOS_DEVICE_NOT_FOUND; if (size == 1) @@ -128,7 +128,7 @@ static int gt64xxx_pci0_pcibios_write(struct pci_bus *bus, unsigned int devfn, data = val; else { if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus, - devfn, where, &data)) + devfn, where, &data)) return PCIBIOS_DEVICE_NOT_FOUND; if (size == 1) @@ -140,7 +140,7 @@ static int gt64xxx_pci0_pcibios_write(struct pci_bus *bus, unsigned int devfn, } if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, - where, &data)) + where, &data)) return PCIBIOS_DEVICE_NOT_FOUND; return PCIBIOS_SUCCESSFUL; diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c index 1f2afb5..16e7c25 100644 --- a/arch/mips/pci/ops-lantiq.c +++ b/arch/mips/pci/ops-lantiq.c @@ -23,7 +23,7 @@ #define LTQ_PCI_CFG_DEVNUM_SHF 11 #define LTQ_PCI_CFG_FUNNUM_SHF 8 -#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus, diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c index afd2211..98254af 100644 --- a/arch/mips/pci/ops-loongson2.c +++ b/arch/mips/pci/ops-loongson2.c @@ -24,7 +24,7 @@ #include <cs5536/cs5536.h> #endif -#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 #define CFG_SPACE_REG(offset) \ diff --git a/arch/mips/pci/ops-msc.c b/arch/mips/pci/ops-msc.c index 5d9fbb0..92a8543 100644 --- a/arch/mips/pci/ops-msc.c +++ b/arch/mips/pci/ops-msc.c @@ -1,8 +1,8 @@ /* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. * All rights reserved. * Authors: Carsten Langgaard <carstenl@mips.com> - * Maciej W. Rozycki <macro@mips.com> + * Maciej W. Rozycki <macro@mips.com> * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can distribute it and/or modify it @@ -28,21 +28,21 @@ #include <asm/mips-boards/msc01_pci.h> -#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 /* * PCI configuration cycle AD bus definition */ /* Type 0 */ -#define PCI_CFG_TYPE0_REG_SHF 0 -#define PCI_CFG_TYPE0_FUNC_SHF 8 +#define PCI_CFG_TYPE0_REG_SHF 0 +#define PCI_CFG_TYPE0_FUNC_SHF 8 /* Type 1 */ -#define PCI_CFG_TYPE1_REG_SHF 0 -#define PCI_CFG_TYPE1_FUNC_SHF 8 -#define PCI_CFG_TYPE1_DEV_SHF 11 -#define PCI_CFG_TYPE1_BUS_SHF 16 +#define PCI_CFG_TYPE1_REG_SHF 0 +#define PCI_CFG_TYPE1_FUNC_SHF 8 +#define PCI_CFG_TYPE1_DEV_SHF 11 +#define PCI_CFG_TYPE1_BUS_SHF 16 static int msc_pcibios_config_access(unsigned char access_type, struct pci_bus *bus, unsigned int devfn, int where, u32 * data) @@ -97,7 +97,7 @@ static int msc_pcibios_read(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_BAD_REGISTER_NUMBER; if (msc_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, - &data)) + &data)) return -1; if (size == 1) @@ -124,7 +124,7 @@ static int msc_pcibios_write(struct pci_bus *bus, unsigned int devfn, data = val; else { if (msc_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) + where, &data)) return -1; if (size == 1) diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c index 99929cf..499e35c 100644 --- a/arch/mips/pci/ops-nile4.c +++ b/arch/mips/pci/ops-nile4.c @@ -6,7 +6,7 @@ #include <asm/lasat/lasat.h> #include <asm/nile4.h> -#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 #define LO(reg) (reg / 4) diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c index 389bf66..d0b6f83 100644 --- a/arch/mips/pci/ops-pmcmsp.c +++ b/arch/mips/pci/ops-pmcmsp.c @@ -9,8 +9,8 @@ * Much of the code is derived from the original DDB5074 port by * Geert Uytterhoeven <geert@sonycom.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * @@ -57,18 +57,18 @@ static void pci_proc_init(void); * _________________________________________________________________________ * * DESCRIPTION: Prints the count of how many times each PCI - * interrupt has asserted. Can be invoked by the - * /proc filesystem. + * interrupt has asserted. Can be invoked by the + * /proc filesystem. * - * INPUTS: page - part of STDOUT calculation - * off - part of STDOUT calculation - * count - part of STDOUT calculation - * data - unused + * INPUTS: page - part of STDOUT calculation + * off - part of STDOUT calculation + * count - part of STDOUT calculation + * data - unused * - * OUTPUTS: start - new start location - * eof - end of file pointer + * OUTPUTS: start - new start location + * eof - end of file pointer * - * RETURNS: len - STDOUT length + * RETURNS: len - STDOUT length * ****************************************************************************/ static int read_msp_pci_counts(char *page, char **start, off_t off, @@ -106,21 +106,21 @@ static int read_msp_pci_counts(char *page, char **start, off_t off, * _________________________________________________________________________ * * DESCRIPTION: Generates a configuration write cycle for debug purposes. - * The IDSEL line asserted and location and data written are - * immaterial. Just want to be able to prove that a - * configuration write can be correctly generated on the - * PCI bus. Intent is that this function by invocable from - * the /proc filesystem. + * The IDSEL line asserted and location and data written are + * immaterial. Just want to be able to prove that a + * configuration write can be correctly generated on the + * PCI bus. Intent is that this function by invocable from + * the /proc filesystem. * - * INPUTS: page - part of STDOUT calculation - * off - part of STDOUT calculation - * count - part of STDOUT calculation - * data - unused + * INPUTS: page - part of STDOUT calculation + * off - part of STDOUT calculation + * count - part of STDOUT calculation + * data - unused * - * OUTPUTS: start - new start location - * eof - end of file pointer + * OUTPUTS: start - new start location + * eof - end of file pointer * - * RETURNS: len - STDOUT length + * RETURNS: len - STDOUT length * ****************************************************************************/ static int gen_pci_cfg_wr(char *page, char **start, off_t off, @@ -190,11 +190,11 @@ static int gen_pci_cfg_wr(char *page, char **start, off_t off, * * DESCRIPTION: Create entries in the /proc filesystem for debug access. * - * INPUTS: none + * INPUTS: none * - * OUTPUTS: none + * OUTPUTS: none * - * RETURNS: none + * RETURNS: none * ****************************************************************************/ static void pci_proc_init(void) @@ -214,44 +214,44 @@ static DEFINE_SPINLOCK(bpci_lock); * _________________________________________________________________________ * * DESCRIPTION: Defines the address range that pciauto() will use to - * assign to the I/O BARs of PCI devices. - * - * Use the start and end addresses of the MSP7120 PCI Host - * Controller I/O space, in the form that they appear on the - * PCI bus AFTER MSP7120 has performed address translation. - * - * For I/O accesses, MSP7120 ignores OATRAN and maps I/O - * accesses into the bottom 0xFFF region of address space, - * so that is the range to put into the pci_io_resource - * struct. - * - * In MSP4200, the start address was 0x04 instead of the - * expected 0x00. Will just assume there was a good reason - * for this! - * - * NOTES: Linux, by default, will assign I/O space to the lowest - * region of address space. Since MSP7120 and Linux, - * by default, have no offset in between how they map, the - * io_offset element of pci_controller struct should be set - * to zero. + * assign to the I/O BARs of PCI devices. + * + * Use the start and end addresses of the MSP7120 PCI Host + * Controller I/O space, in the form that they appear on the + * PCI bus AFTER MSP7120 has performed address translation. + * + * For I/O accesses, MSP7120 ignores OATRAN and maps I/O + * accesses into the bottom 0xFFF region of address space, + * so that is the range to put into the pci_io_resource + * struct. + * + * In MSP4200, the start address was 0x04 instead of the + * expected 0x00. Will just assume there was a good reason + * for this! + * + * NOTES: Linux, by default, will assign I/O space to the lowest + * region of address space. Since MSP7120 and Linux, + * by default, have no offset in between how they map, the + * io_offset element of pci_controller struct should be set + * to zero. * ELEMENTS: - * name - String used for a meaningful name. + * name - String used for a meaningful name. * - * start - Start address of MSP7120's I/O space, as MSP7120 presents - * the address on the PCI bus. + * start - Start address of MSP7120's I/O space, as MSP7120 presents + * the address on the PCI bus. * - * end - End address of MSP7120's I/O space, as MSP7120 presents - * the address on the PCI bus. + * end - End address of MSP7120's I/O space, as MSP7120 presents + * the address on the PCI bus. * - * flags - Attributes indicating the type of resource. In this case, - * indicate I/O space. + * flags - Attributes indicating the type of resource. In this case, + * indicate I/O space. * ****************************************************************************/ static struct resource pci_io_resource = { .name = "pci IO space", .start = 0x04, .end = 0x0FFF, - .flags = IORESOURCE_IO /* I/O space */ + .flags = IORESOURCE_IO /* I/O space */ }; /***************************************************************************** @@ -260,26 +260,26 @@ static struct resource pci_io_resource = { * _________________________________________________________________________ * * DESCRIPTION: Defines the address range that pciauto() will use to - * assign to the memory BARs of PCI devices. + * assign to the memory BARs of PCI devices. * - * The .start and .end values are dependent upon how address - * translation is performed by the OATRAN regiser. + * The .start and .end values are dependent upon how address + * translation is performed by the OATRAN regiser. * - * The values to use for .start and .end are the values - * in the form they appear on the PCI bus AFTER MSP7120 has - * performed OATRAN address translation. + * The values to use for .start and .end are the values + * in the form they appear on the PCI bus AFTER MSP7120 has + * performed OATRAN address translation. * * ELEMENTS: - * name - String used for a meaningful name. + * name - String used for a meaningful name. * - * start - Start address of MSP7120's memory space, as MSP7120 presents - * the address on the PCI bus. + * start - Start address of MSP7120's memory space, as MSP7120 presents + * the address on the PCI bus. * - * end - End address of MSP7120's memory space, as MSP7120 presents - * the address on the PCI bus. + * end - End address of MSP7120's memory space, as MSP7120 presents + * the address on the PCI bus. * - * flags - Attributes indicating the type of resource. In this case, - * indicate memory space. + * flags - Attributes indicating the type of resource. In this case, + * indicate memory space. * ****************************************************************************/ static struct resource pci_mem_resource = { @@ -295,17 +295,17 @@ static struct resource pci_mem_resource = { * _________________________________________________________________________ * * DESCRIPTION: PCI status interrupt handler. Updates the count of how - * many times each status bit has been set, then clears - * the status bits. If the appropriate macros are defined, - * these counts can be viewed via the /proc filesystem. + * many times each status bit has been set, then clears + * the status bits. If the appropriate macros are defined, + * these counts can be viewed via the /proc filesystem. * - * INPUTS: irq - unused - * dev_id - unused - * pt_regs - unused + * INPUTS: irq - unused + * dev_id - unused + * pt_regs - unused * - * OUTPUTS: none + * OUTPUTS: none * - * RETURNS: PCIBIOS_SUCCESSFUL - success + * RETURNS: PCIBIOS_SUCCESSFUL - success * ****************************************************************************/ static irqreturn_t bpci_interrupt(int irq, void *dev_id) @@ -335,41 +335,41 @@ static irqreturn_t bpci_interrupt(int irq, void *dev_id) * _________________________________________________________________________ * * DESCRIPTION: Performs a PCI configuration access (rd or wr), then - * checks that the access succeeded by querying MSP7120's - * PCI status bits. + * checks that the access succeeded by querying MSP7120's + * PCI status bits. * * INPUTS: - * access_type - kind of PCI configuration cycle to perform - * (read or write). Legal values are - * PCI_ACCESS_WRITE and PCI_ACCESS_READ. - * - * bus - pointer to the bus number of the device to - * be targeted for the configuration cycle. - * The only element of the pci_bus structure - * used is bus->number. This argument determines - * if the configuration access will be Type 0 or - * Type 1. Since MSP7120 assumes itself to be the - * PCI Host, any non-zero bus->number generates - * a Type 1 access. - * - * devfn - this is an 8-bit field. The lower three bits - * specify the function number of the device to - * be targeted for the configuration cycle, with - * all three-bit combinations being legal. The - * upper five bits specify the device number, - * with legal values being 10 to 31. - * - * where - address within the Configuration Header - * space to access. - * - * data - for write accesses, contains the data to - * write. + * access_type - kind of PCI configuration cycle to perform + * (read or write). Legal values are + * PCI_ACCESS_WRITE and PCI_ACCESS_READ. + * + * bus - pointer to the bus number of the device to + * be targeted for the configuration cycle. + * The only element of the pci_bus structure + * used is bus->number. This argument determines + * if the configuration access will be Type 0 or + * Type 1. Since MSP7120 assumes itself to be the + * PCI Host, any non-zero bus->number generates + * a Type 1 access. + * + * devfn - this is an 8-bit field. The lower three bits + * specify the function number of the device to + * be targeted for the configuration cycle, with + * all three-bit combinations being legal. The + * upper five bits specify the device number, + * with legal values being 10 to 31. + * + * where - address within the Configuration Header + * space to access. + * + * data - for write accesses, contains the data to + * write. * * OUTPUTS: - * data - for read accesses, contains the value read. + * data - for read accesses, contains the value read. * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - access failure + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - access failure * ****************************************************************************/ int msp_pcibios_config_access(unsigned char access_type, @@ -429,7 +429,7 @@ int msp_pcibios_config_access(unsigned char access_type, * for this Block Copy, called Block Copy 0 Fault (BC0F) and * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this * dedicated Block Copy block, so these two interrupts are now - * marked reserved. In case the Block Copy is resurrected in a + * marked reserved. In case the Block Copy is resurrected in a * future design, maintain the code that treats these two interrupts * specially. * @@ -439,7 +439,7 @@ int msp_pcibios_config_access(unsigned char access_type, preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); /* Setup address that is to appear on PCI bus */ - preg->config_addr = BPCI_CFGADDR_ENABLE | + preg->config_addr = BPCI_CFGADDR_ENABLE | (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | (where & 0xFC); @@ -494,21 +494,21 @@ int msp_pcibios_config_access(unsigned char access_type, * _________________________________________________________________________ * * DESCRIPTION: Read a byte from PCI configuration address spac - * Since the hardware can't address 8 bit chunks - * directly, read a 32-bit chunk, then mask off extraneous - * bits. + * Since the hardware can't address 8 bit chunks + * directly, read a 32-bit chunk, then mask off extraneous + * bits. * - * INPUTS bus - structure containing attributes for the PCI bus - * that the read is destined for. - * devfn - device/function combination that the read is - * destined for. - * where - register within the Configuration Header space - * to access. + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. * - * OUTPUTS val - read data + * OUTPUTS val - read data * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - read access failure + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - read access failure * ****************************************************************************/ static int @@ -541,22 +541,22 @@ msp_pcibios_read_config_byte(struct pci_bus *bus, * _________________________________________________________________________ * * DESCRIPTION: Read a word (16 bits) from PCI configuration address space. - * Since the hardware can't address 16 bit chunks - * directly, read a 32-bit chunk, then mask off extraneous - * bits. + * Since the hardware can't address 16 bit chunks + * directly, read a 32-bit chunk, then mask off extraneous + * bits. * - * INPUTS bus - structure containing attributes for the PCI bus - * that the read is destined for. - * devfn - device/function combination that the read is - * destined for. - * where - register within the Configuration Header space - * to access. + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. * - * OUTPUTS val - read data + * OUTPUTS val - read data * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - read access failure + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - read access failure * ****************************************************************************/ static int @@ -600,20 +600,20 @@ msp_pcibios_read_config_word(struct pci_bus *bus, * _________________________________________________________________________ * * DESCRIPTION: Read a double word (32 bits) from PCI configuration - * address space. + * address space. * - * INPUTS bus - structure containing attributes for the PCI bus - * that the read is destined for. - * devfn - device/function combination that the read is - * destined for. - * where - register within the Configuration Header space - * to access. + * INPUTS bus - structure containing attributes for the PCI bus + * that the read is destined for. + * devfn - device/function combination that the read is + * destined for. + * where - register within the Configuration Header space + * to access. * - * OUTPUTS val - read data + * OUTPUTS val - read data * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - read access failure + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - read access failure * ****************************************************************************/ static int @@ -652,21 +652,21 @@ msp_pcibios_read_config_dword(struct pci_bus *bus, * _________________________________________________________________________ * * DESCRIPTION: Write a byte to PCI configuration address space. - * Since the hardware can't address 8 bit chunks - * directly, a read-modify-write is performed. + * Since the hardware can't address 8 bit chunks + * directly, a read-modify-write is performed. * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * val - value to write + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write * - * OUTPUTS none + * OUTPUTS none * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - write access failure + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - write access failure * ****************************************************************************/ static int @@ -700,22 +700,22 @@ msp_pcibios_write_config_byte(struct pci_bus *bus, * _________________________________________________________________________ * * DESCRIPTION: Write a word (16-bits) to PCI configuration address space. - * Since the hardware can't address 16 bit chunks - * directly, a read-modify-write is performed. + * Since the hardware can't address 16 bit chunks + * directly, a read-modify-write is performed. * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * val - value to write + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write * - * OUTPUTS none + * OUTPUTS none * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - write access failure + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - write access failure * ****************************************************************************/ static int @@ -753,21 +753,21 @@ msp_pcibios_write_config_word(struct pci_bus *bus, * _________________________________________________________________________ * * DESCRIPTION: Write a double word (32-bits) to PCI configuration address - * space. + * space. * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * val - value to write + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * val - value to write * - * OUTPUTS none + * OUTPUTS none * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - write access failure + * RETURNS: PCIBIOS_SUCCESSFUL - success + * PCIBIOS_BAD_REGISTER_NUMBER - bad register address + * -1 - write access failure * ****************************************************************************/ static int @@ -794,22 +794,22 @@ msp_pcibios_write_config_dword(struct pci_bus *bus, * _________________________________________________________________________ * * DESCRIPTION: Interface the PCI configuration read request with - * the appropriate function, based on how many bytes - * the read request is. + * the appropriate function, based on how many bytes + * the read request is. * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * size - in units of bytes, should be 1, 2, or 4. + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * size - in units of bytes, should be 1, 2, or 4. * - * OUTPUTS val - value read, with any extraneous bytes masked - * to zero. + * OUTPUTS val - value read, with any extraneous bytes masked + * to zero. * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - failure + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - failure * ****************************************************************************/ int @@ -845,22 +845,22 @@ msp_pcibios_read_config(struct pci_bus *bus, * _________________________________________________________________________ * * DESCRIPTION: Interface the PCI configuration write request with - * the appropriate function, based on how many bytes - * the read request is. + * the appropriate function, based on how many bytes + * the read request is. * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * size - in units of bytes, should be 1, 2, or 4. - * val - value to write + * INPUTS bus - structure containing attributes for the PCI bus + * that the write is destined for. + * devfn - device/function combination that the write is + * destined for. + * where - register within the Configuration Header space + * to access. + * size - in units of bytes, should be 1, 2, or 4. + * val - value to write * - * OUTPUTS: none + * OUTPUTS: none * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - failure + * RETURNS: PCIBIOS_SUCCESSFUL - success + * -1 - failure * ****************************************************************************/ int @@ -897,11 +897,11 @@ msp_pcibios_write_config(struct pci_bus *bus, * _________________________________________________________________________ * * DESCRIPTION: structure to abstract the hardware specific PCI - * configuration accesses. + * configuration accesses. * * ELEMENTS: - * read - function for Linux to generate PCI Configuration reads. - * write - function for Linux to generate PCI Configuration writes. + * read - function for Linux to generate PCI Configuration reads. + * write - function for Linux to generate PCI Configuration writes. * ****************************************************************************/ struct pci_ops msp_pci_ops = { @@ -917,27 +917,27 @@ struct pci_ops msp_pci_ops = { * Describes the attributes of the MSP7120 PCI Host Controller * * ELEMENTS: - * pci_ops - abstracts the hardware specific PCI configuration - * accesses. + * pci_ops - abstracts the hardware specific PCI configuration + * accesses. * * mem_resource - address range pciauto() uses to assign to PCI device - * memory BARs. + * memory BARs. * * mem_offset - offset between how MSP7120 outbound PCI memory - * transaction addresses appear on the PCI bus and how Linux - * wants to configure memory BARs of the PCI devices. - * MSP7120 does nothing funky, so just set to zero. + * transaction addresses appear on the PCI bus and how Linux + * wants to configure memory BARs of the PCI devices. + * MSP7120 does nothing funky, so just set to zero. * * io_resource - address range pciauto() uses to assign to PCI device - * I/O BARs. + * I/O BARs. * - * io_offset - offset between how MSP7120 outbound PCI I/O - * transaction addresses appear on the PCI bus and how - * Linux defaults to configure I/O BARs of the PCI devices. - * MSP7120 maps outbound I/O accesses into the bottom - * bottom 4K of PCI address space (and ignores OATRAN). - * Since the Linux default is to configure I/O BARs to the - * bottom 4K, no special offset is needed. Just set to zero. + * io_offset - offset between how MSP7120 outbound PCI I/O + * transaction addresses appear on the PCI bus and how + * Linux defaults to configure I/O BARs of the PCI devices. + * MSP7120 maps outbound I/O accesses into the bottom + * bottom 4K of PCI address space (and ignores OATRAN). + * Since the Linux default is to configure I/O BARs to the + * bottom 4K, no special offset is needed. Just set to zero. * ****************************************************************************/ static struct pci_controller msp_pci_controller = { @@ -955,7 +955,7 @@ static struct pci_controller msp_pci_controller = { * _________________________________________________________________________ * * DESCRIPTION: Initialize the PCI Host Controller and register it with - * Linux so Linux can seize control of the PCI bus. + * Linux so Linux can seize control of the PCI bus. * ****************************************************************************/ void __init msp_pci_init(void) @@ -979,7 +979,7 @@ void __init msp_pci_init(void) *(unsigned long *)QFLUSH_REG_1 = 3; /* Configure PCI Host Controller. */ - preg->if_status = ~0; /* Clear cause register bits */ + preg->if_status = ~0; /* Clear cause register bits */ preg->config_addr = 0; /* Clear config access */ preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */ preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */ diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c deleted file mode 100644 index 1e6213f..0000000 --- a/arch/mips/pci/ops-pnx8550.c +++ /dev/null @@ -1,282 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * - * 2.6 port, Embedded Alley Solutions, Inc - * - * Based on: - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/vmalloc.h> -#include <linux/delay.h> - -#include <asm/mach-pnx8550/pci.h> -#include <asm/mach-pnx8550/glb.h> - -static inline void clear_status(void) -{ - unsigned long pci_stat; - - pci_stat = inl(PCI_BASE | PCI_GPPM_STATUS); - outl(pci_stat, PCI_BASE | PCI_GPPM_ICLR); -} - -static inline unsigned int -calc_cfg_addr(struct pci_bus *bus, unsigned int devfn, int where) -{ - unsigned int addr; - - addr = ((bus->number > 0) ? (((bus->number & 0xff) << PCI_CFG_BUS_SHIFT) | 1) : 0); - addr |= ((devfn & 0xff) << PCI_CFG_FUNC_SHIFT) | (where & 0xfc); - - return addr; -} - -static int -config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int where, unsigned int pci_mode, unsigned int *val) -{ - unsigned int flags; - unsigned long loops = 0; - unsigned long ioaddr = calc_cfg_addr(bus, devfn, where); - - local_irq_save(flags); - /*Clear pending interrupt status */ - if (inl(PCI_BASE | PCI_GPPM_STATUS)) { - clear_status(); - while (!(inl(PCI_BASE | PCI_GPPM_STATUS) == 0)) ; - } - - outl(ioaddr, PCI_BASE | PCI_GPPM_ADDR); - - if ((pci_cmd == PCI_CMD_IOW) || (pci_cmd == PCI_CMD_CONFIG_WRITE)) - outl(*val, PCI_BASE | PCI_GPPM_WDAT); - - outl(INIT_PCI_CYCLE | pci_cmd | (pci_mode & PCI_BYTE_ENABLE_MASK), - PCI_BASE | PCI_GPPM_CTRL); - - loops = - ((loops_per_jiffy * - PCI_IO_JIFFIES_TIMEOUT) >> (PCI_IO_JIFFIES_SHIFT)); - while (1) { - if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_DONE) { - if ((pci_cmd == PCI_CMD_IOR) || - (pci_cmd == PCI_CMD_CONFIG_READ)) - *val = inl(PCI_BASE | PCI_GPPM_RDAT); - clear_status(); - local_irq_restore(flags); - return PCIBIOS_SUCCESSFUL; - } else if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_R_MABORT) { - break; - } - - loops--; - if (loops == 0) { - printk("%s : Arbiter Locked.\n", __func__); - } - } - - clear_status(); - if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) { - printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n", - __func__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr, - pci_cmd); - } - - if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_CONFIG_READ)) - *val = 0xffffffff; - local_irq_restore(flags); - return PCIBIOS_DEVICE_NOT_FOUND; -} - -/* - * We can't address 8 and 16 bit words directly. Instead we have to - * read/write a 32bit word and mask/modify the data we actually want. - */ -static int -read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val) -{ - unsigned int data = 0; - int err; - - if (bus == NULL) - return -1; - - err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data); - switch (where & 0x03) { - case 0: - *val = (unsigned char)(data & 0x000000ff); - break; - case 1: - *val = (unsigned char)((data & 0x0000ff00) >> 8); - break; - case 2: - *val = (unsigned char)((data & 0x00ff0000) >> 16); - break; - case 3: - *val = (unsigned char)((data & 0xff000000) >> 24); - break; - } - - return err; -} - -static int -read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val) -{ - unsigned int data = 0; - int err; - - if (bus == NULL) - return -1; - - if (where & 0x01) - return PCIBIOS_BAD_REGISTER_NUMBER; - - err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(3 << (where & 3)), &data); - switch (where & 0x02) { - case 0: - *val = (unsigned short)(data & 0x0000ffff); - break; - case 2: - *val = (unsigned short)((data & 0xffff0000) >> 16); - break; - } - - return err; -} - -static int -read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val) -{ - int err; - if (bus == NULL) - return -1; - - if (where & 0x03) - return PCIBIOS_BAD_REGISTER_NUMBER; - - err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, 0, val); - - return err; -} - -static int -write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val) -{ - unsigned int data = (unsigned int)val; - int err; - - if (bus == NULL) - return -1; - - switch (where & 0x03) { - case 1: - data = (data << 8); - break; - case 2: - data = (data << 16); - break; - case 3: - data = (data << 24); - break; - default: - break; - } - - err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(1 << (where & 3)), &data); - - return err; -} - -static int -write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val) -{ - unsigned int data = (unsigned int)val; - int err; - - if (bus == NULL) - return -1; - - if (where & 0x01) - return PCIBIOS_BAD_REGISTER_NUMBER; - - switch (where & 0x02) { - case 2: - data = (data << 16); - break; - default: - break; - } - err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(3 << (where & 3)), &data); - - return err; -} - -static int -write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val) -{ - int err; - if (bus == NULL) - return -1; - - if (where & 0x03) - return PCIBIOS_BAD_REGISTER_NUMBER; - - err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, 0, &val); - - return err; -} - -static int config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) -{ - switch (size) { - case 1: { - u8 _val; - int rc = read_config_byte(bus, devfn, where, &_val); - *val = _val; - return rc; - } - case 2: { - u16 _val; - int rc = read_config_word(bus, devfn, where, &_val); - *val = _val; - return rc; - } - default: - return read_config_dword(bus, devfn, where, val); - } -} - -static int config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) -{ - switch (size) { - case 1: - return write_config_byte(bus, devfn, where, (u8) val); - case 2: - return write_config_word(bus, devfn, where, (u16) val); - default: - return write_config_dword(bus, devfn, where, val); - } -} - -struct pci_ops pnx8550_pci_ops = { - config_read, - config_write -}; diff --git a/arch/mips/pci/ops-rc32434.c b/arch/mips/pci/ops-rc32434.c index d1f8fa2..7c7182e 100644 --- a/arch/mips/pci/ops-rc32434.c +++ b/arch/mips/pci/ops-rc32434.c @@ -35,7 +35,7 @@ #include <asm/mach-rc32434/rc32434.h> #include <asm/mach-rc32434/pci.h> -#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 diff --git a/arch/mips/pci/ops-sni.c b/arch/mips/pci/ops-sni.c index 97ed25b..35daa7f 100644 --- a/arch/mips/pci/ops-sni.c +++ b/arch/mips/pci/ops-sni.c @@ -14,8 +14,8 @@ /* * It seems that on the RM200 only lower 3 bits of the 5 bit PCI device - * address are decoded. We therefore manually have to reject attempts at - * reading outside this range. Being on the paranoid side we only do this + * address are decoded. We therefore manually have to reject attempts at + * reading outside this range. Being on the paranoid side we only do this * test for bus 0 and hope forwarding and decoding work properly for any * subordinated busses. * @@ -31,8 +31,8 @@ static int set_config_address(unsigned int busno, unsigned int devfn, int reg) *(volatile u32 *)PCIMT_CONFIG_ADDRESS = ((busno & 0xff) << 16) | - ((devfn & 0xff) << 8) | - (reg & 0xfc); + ((devfn & 0xff) << 8) | + (reg & 0xfc); return PCIBIOS_SUCCESSFUL; } diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 0d69d6f..3d5df51 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -2,16 +2,16 @@ * Define the pci_ops for the PCIC on Toshiba TX4927, TX4938, etc. * * Based on linux/arch/mips/pci/ops-tx4938.c, - * linux/arch/mips/pci/fixup-rbtx4938.c, - * linux/arch/mips/txx9/rbtx4938/setup.c, + * linux/arch/mips/pci/fixup-rbtx4938.c, + * linux/arch/mips/txx9/rbtx4938/setup.c, * and RBTX49xx patch from CELF patch archive. * * 2003-2005 (c) MontaVista Software, Inc. * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c index 28962a7..551128c 100644 --- a/arch/mips/pci/ops-vr41xx.c +++ b/arch/mips/pci/ops-vr41xx.c @@ -33,7 +33,7 @@ #define PCICONFAREG (void __iomem *)KSEG1ADDR(0x0f000c18) static inline int set_pci_configuration_address(unsigned char number, - unsigned int devfn, int where) + unsigned int devfn, int where) { if (number == 0) { /* @@ -59,7 +59,7 @@ static inline int set_pci_configuration_address(unsigned char number, } static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, uint32_t *val) + int size, uint32_t *val) { uint32_t data; @@ -87,7 +87,7 @@ static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, } static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, - int size, uint32_t val) + int size, uint32_t val) { uint32_t data; int shift; diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c index c4ea6cc..38a80c8 100644 --- a/arch/mips/pci/pci-alchemy.c +++ b/arch/mips/pci/pci-alchemy.c @@ -29,7 +29,7 @@ #define PCI_ACCESS_WRITE 1 struct alchemy_pci_context { - struct pci_controller alchemy_pci_ctrl; /* leave as first member! */ + struct pci_controller alchemy_pci_ctrl; /* leave as first member! */ void __iomem *regs; /* ctrl base */ /* tools for wired entry for config space access */ unsigned long last_elo0; @@ -381,7 +381,7 @@ static int alchemy_pci_probe(struct platform_device *pdev) r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) { - dev_err(&pdev->dev, "no pcictl ctrl regs resource\n"); + dev_err(&pdev->dev, "no pcictl ctrl regs resource\n"); ret = -ENODEV; goto out1; } @@ -482,7 +482,7 @@ out: static struct platform_driver alchemy_pcictl_driver = { .probe = alchemy_pci_probe, - .driver = { + .driver = { .name = "alchemy-pci", .owner = THIS_MODULE, }, diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c index 6eaa4f2..412ec02 100644 --- a/arch/mips/pci/pci-ar71xx.c +++ b/arch/mips/pci/pci-ar71xx.c @@ -18,26 +18,11 @@ #include <linux/pci.h> #include <linux/pci_regs.h> #include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include <asm/mach-ath79/ar71xx_regs.h> #include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/pci.h> - -#define AR71XX_PCI_MEM_BASE 0x10000000 -#define AR71XX_PCI_MEM_SIZE 0x07000000 - -#define AR71XX_PCI_WIN0_OFFS 0x10000000 -#define AR71XX_PCI_WIN1_OFFS 0x11000000 -#define AR71XX_PCI_WIN2_OFFS 0x12000000 -#define AR71XX_PCI_WIN3_OFFS 0x13000000 -#define AR71XX_PCI_WIN4_OFFS 0x14000000 -#define AR71XX_PCI_WIN5_OFFS 0x15000000 -#define AR71XX_PCI_WIN6_OFFS 0x16000000 -#define AR71XX_PCI_WIN7_OFFS 0x07000000 - -#define AR71XX_PCI_CFG_BASE \ - (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000) -#define AR71XX_PCI_CFG_SIZE 0x100 #define AR71XX_PCI_REG_CRP_AD_CBE 0x00 #define AR71XX_PCI_REG_CRP_WRDATA 0x04 @@ -63,8 +48,15 @@ #define AR71XX_PCI_IRQ_COUNT 5 -static DEFINE_SPINLOCK(ar71xx_pci_lock); -static void __iomem *ar71xx_pcicfg_base; +struct ar71xx_pci_controller { + void __iomem *cfg_base; + spinlock_t lock; + int irq; + int irq_base; + struct pci_controller pci_ctrl; + struct resource io_res; + struct resource mem_res; +}; /* Byte lane enable bits */ static const u8 ar71xx_pci_ble_table[4][4] = { @@ -107,9 +99,18 @@ static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn, return ret; } -static int ar71xx_pci_check_error(int quiet) +static inline struct ar71xx_pci_controller * +pci_bus_to_ar71xx_controller(struct pci_bus *bus) { - void __iomem *base = ar71xx_pcicfg_base; + struct pci_controller *hose; + + hose = (struct pci_controller *) bus->sysdata; + return container_of(hose, struct ar71xx_pci_controller, pci_ctrl); +} + +static int ar71xx_pci_check_error(struct ar71xx_pci_controller *apc, int quiet) +{ + void __iomem *base = apc->cfg_base; u32 pci_err; u32 ahb_err; @@ -144,9 +145,10 @@ static int ar71xx_pci_check_error(int quiet) return !!(ahb_err | pci_err); } -static inline void ar71xx_pci_local_write(int where, int size, u32 value) +static inline void ar71xx_pci_local_write(struct ar71xx_pci_controller *apc, + int where, int size, u32 value) { - void __iomem *base = ar71xx_pcicfg_base; + void __iomem *base = apc->cfg_base; u32 ad_cbe; value = value << (8 * (where & 3)); @@ -162,7 +164,8 @@ static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 cmd) { - void __iomem *base = ar71xx_pcicfg_base; + struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus); + void __iomem *base = apc->cfg_base; u32 addr; addr = ar71xx_pci_bus_addr(bus, devfn, where); @@ -171,13 +174,14 @@ static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus, __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0), base + AR71XX_PCI_REG_CFG_CBE); - return ar71xx_pci_check_error(1); + return ar71xx_pci_check_error(apc, 1); } static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) { - void __iomem *base = ar71xx_pcicfg_base; + struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus); + void __iomem *base = apc->cfg_base; unsigned long flags; u32 data; int err; @@ -186,7 +190,7 @@ static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, ret = PCIBIOS_SUCCESSFUL; data = ~0; - spin_lock_irqsave(&ar71xx_pci_lock, flags); + spin_lock_irqsave(&apc->lock, flags); err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, AR71XX_PCI_CFG_CMD_READ); @@ -195,7 +199,7 @@ static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, else data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA); - spin_unlock_irqrestore(&ar71xx_pci_lock, flags); + spin_unlock_irqrestore(&apc->lock, flags); *value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7]; @@ -205,7 +209,8 @@ static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) { - void __iomem *base = ar71xx_pcicfg_base; + struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus); + void __iomem *base = apc->cfg_base; unsigned long flags; int err; int ret; @@ -213,7 +218,7 @@ static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, value = value << (8 * (where & 3)); ret = PCIBIOS_SUCCESSFUL; - spin_lock_irqsave(&ar71xx_pci_lock, flags); + spin_lock_irqsave(&apc->lock, flags); err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, AR71XX_PCI_CFG_CMD_WRITE); @@ -222,7 +227,7 @@ static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, else __raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA); - spin_unlock_irqrestore(&ar71xx_pci_lock, flags); + spin_unlock_irqrestore(&apc->lock, flags); return ret; } @@ -232,45 +237,28 @@ static struct pci_ops ar71xx_pci_ops = { .write = ar71xx_pci_write_config, }; -static struct resource ar71xx_pci_io_resource = { - .name = "PCI IO space", - .start = 0, - .end = 0, - .flags = IORESOURCE_IO, -}; - -static struct resource ar71xx_pci_mem_resource = { - .name = "PCI memory space", - .start = AR71XX_PCI_MEM_BASE, - .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -static struct pci_controller ar71xx_pci_controller = { - .pci_ops = &ar71xx_pci_ops, - .mem_resource = &ar71xx_pci_mem_resource, - .io_resource = &ar71xx_pci_io_resource, -}; - static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc) { + struct ar71xx_pci_controller *apc; void __iomem *base = ath79_reset_base; u32 pending; + apc = irq_get_handler_data(irq); + pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); if (pending & AR71XX_PCI_INT_DEV0) - generic_handle_irq(ATH79_PCI_IRQ(0)); + generic_handle_irq(apc->irq_base + 0); else if (pending & AR71XX_PCI_INT_DEV1) - generic_handle_irq(ATH79_PCI_IRQ(1)); + generic_handle_irq(apc->irq_base + 1); else if (pending & AR71XX_PCI_INT_DEV2) - generic_handle_irq(ATH79_PCI_IRQ(2)); + generic_handle_irq(apc->irq_base + 2); else if (pending & AR71XX_PCI_INT_CORE) - generic_handle_irq(ATH79_PCI_IRQ(4)); + generic_handle_irq(apc->irq_base + 4); else spurious_interrupt(); @@ -278,10 +266,14 @@ static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc) static void ar71xx_pci_irq_unmask(struct irq_data *d) { - unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE; + struct ar71xx_pci_controller *apc; + unsigned int irq; void __iomem *base = ath79_reset_base; u32 t; + apc = irq_data_get_irq_chip_data(d); + irq = d->irq - apc->irq_base; + t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); @@ -291,10 +283,14 @@ static void ar71xx_pci_irq_unmask(struct irq_data *d) static void ar71xx_pci_irq_mask(struct irq_data *d) { - unsigned int irq = d->irq - ATH79_PCI_IRQ_BASE; + struct ar71xx_pci_controller *apc; + unsigned int irq; void __iomem *base = ath79_reset_base; u32 t; + apc = irq_data_get_irq_chip_data(d); + irq = d->irq - apc->irq_base; + t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); @@ -309,7 +305,7 @@ static struct irq_chip ar71xx_pci_irq_chip = { .irq_mask_ack = ar71xx_pci_irq_mask, }; -static __init void ar71xx_pci_irq_init(void) +static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc) { void __iomem *base = ath79_reset_base; int i; @@ -319,15 +315,19 @@ static __init void ar71xx_pci_irq_init(void) BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT); - for (i = ATH79_PCI_IRQ_BASE; - i < ATH79_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) + apc->irq_base = ATH79_PCI_IRQ_BASE; + for (i = apc->irq_base; + i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) { irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, handle_level_irq); + irq_set_chip_data(i, apc); + } - irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler); + irq_set_handler_data(apc->irq, apc); + irq_set_chained_handler(apc->irq, ar71xx_pci_irq_handler); } -static __init void ar71xx_pci_reset(void) +static void ar71xx_pci_reset(void) { void __iomem *ddr_base = ath79_ddr_base; @@ -349,27 +349,83 @@ static __init void ar71xx_pci_reset(void) mdelay(100); } -__init int ar71xx_pcibios_init(void) +static int ar71xx_pci_probe(struct platform_device *pdev) { + struct ar71xx_pci_controller *apc; + struct resource *res; u32 t; - ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE); - if (ar71xx_pcicfg_base == NULL) + apc = devm_kzalloc(&pdev->dev, sizeof(struct ar71xx_pci_controller), + GFP_KERNEL); + if (!apc) + return -ENOMEM; + + spin_lock_init(&apc->lock); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); + if (!res) + return -EINVAL; + + apc->cfg_base = devm_request_and_ioremap(&pdev->dev, res); + if (!apc->cfg_base) return -ENOMEM; + apc->irq = platform_get_irq(pdev, 0); + if (apc->irq < 0) + return -EINVAL; + + res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base"); + if (!res) + return -EINVAL; + + apc->io_res.parent = res; + apc->io_res.name = "PCI IO space"; + apc->io_res.start = res->start; + apc->io_res.end = res->end; + apc->io_res.flags = IORESOURCE_IO; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base"); + if (!res) + return -EINVAL; + + apc->mem_res.parent = res; + apc->mem_res.name = "PCI memory space"; + apc->mem_res.start = res->start; + apc->mem_res.end = res->end; + apc->mem_res.flags = IORESOURCE_MEM; + ar71xx_pci_reset(); /* setup COMMAND register */ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK; - ar71xx_pci_local_write(PCI_COMMAND, 4, t); + ar71xx_pci_local_write(apc, PCI_COMMAND, 4, t); /* clear bus errors */ - ar71xx_pci_check_error(1); + ar71xx_pci_check_error(apc, 1); + + ar71xx_pci_irq_init(apc); - ar71xx_pci_irq_init(); + apc->pci_ctrl.pci_ops = &ar71xx_pci_ops; + apc->pci_ctrl.mem_resource = &apc->mem_res; + apc->pci_ctrl.io_resource = &apc->io_res; - register_pci_controller(&ar71xx_pci_controller); + register_pci_controller(&apc->pci_ctrl); return 0; } + +static struct platform_driver ar71xx_pci_driver = { + .probe = ar71xx_pci_probe, + .driver = { + .name = "ar71xx-pci", + .owner = THIS_MODULE, + }, +}; + +static int __init ar71xx_pci_init(void) +{ + return platform_driver_register(&ar71xx_pci_driver); +} + +postcore_initcall(ar71xx_pci_init); diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index c11c75b..8a0700d 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -9,19 +9,13 @@ * by the Free Software Foundation. */ +#include <linux/spinlock.h> #include <linux/irq.h> #include <linux/pci.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/pci.h> - -#define AR724X_PCI_CFG_BASE 0x14000000 -#define AR724X_PCI_CFG_SIZE 0x1000 -#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000) -#define AR724X_PCI_CTRL_SIZE 0x100 - -#define AR724X_PCI_MEM_BASE 0x10000000 -#define AR724X_PCI_MEM_SIZE 0x04000000 #define AR724X_PCI_REG_RESET 0x18 #define AR724X_PCI_REG_INT_STATUS 0x4c @@ -35,38 +29,112 @@ #define AR7240_BAR0_WAR_VALUE 0xffff -static DEFINE_SPINLOCK(ar724x_pci_lock); -static void __iomem *ar724x_pci_devcfg_base; -static void __iomem *ar724x_pci_ctrl_base; +#define AR724X_PCI_CMD_INIT (PCI_COMMAND_MEMORY | \ + PCI_COMMAND_MASTER | \ + PCI_COMMAND_INVALIDATE | \ + PCI_COMMAND_PARITY | \ + PCI_COMMAND_SERR | \ + PCI_COMMAND_FAST_BACK) + +struct ar724x_pci_controller { + void __iomem *devcfg_base; + void __iomem *ctrl_base; + void __iomem *crp_base; + + int irq; + int irq_base; + + bool link_up; + bool bar0_is_cached; + u32 bar0_value; -static u32 ar724x_pci_bar0_value; -static bool ar724x_pci_bar0_is_cached; -static bool ar724x_pci_link_up; + spinlock_t lock; -static inline bool ar724x_pci_check_link(void) + struct pci_controller pci_controller; + struct resource io_res; + struct resource mem_res; +}; + +static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc) { u32 reset; - reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET); + reset = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_RESET); return reset & AR724X_PCI_RESET_LINK_UP; } +static inline struct ar724x_pci_controller * +pci_bus_to_ar724x_controller(struct pci_bus *bus) +{ + struct pci_controller *hose; + + hose = (struct pci_controller *) bus->sysdata; + return container_of(hose, struct ar724x_pci_controller, pci_controller); +} + +static int ar724x_pci_local_write(struct ar724x_pci_controller *apc, + int where, int size, u32 value) +{ + unsigned long flags; + void __iomem *base; + u32 data; + int s; + + WARN_ON(where & (size - 1)); + + if (!apc->link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + + base = apc->crp_base; + + spin_lock_irqsave(&apc->lock, flags); + data = __raw_readl(base + (where & ~3)); + + switch (size) { + case 1: + s = ((where & 3) * 8); + data &= ~(0xff << s); + data |= ((value & 0xff) << s); + break; + case 2: + s = ((where & 2) * 8); + data &= ~(0xffff << s); + data |= ((value & 0xffff) << s); + break; + case 4: + data = value; + break; + default: + spin_unlock_irqrestore(&apc->lock, flags); + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + __raw_writel(data, base + (where & ~3)); + /* flush write */ + __raw_readl(base + (where & ~3)); + spin_unlock_irqrestore(&apc->lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, uint32_t *value) { + struct ar724x_pci_controller *apc; unsigned long flags; void __iomem *base; u32 data; - if (!ar724x_pci_link_up) + apc = pci_bus_to_ar724x_controller(bus); + if (!apc->link_up) return PCIBIOS_DEVICE_NOT_FOUND; if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; - base = ar724x_pci_devcfg_base; + base = apc->devcfg_base; - spin_lock_irqsave(&ar724x_pci_lock, flags); + spin_lock_irqsave(&apc->lock, flags); data = __raw_readl(base + (where & ~3)); switch (size) { @@ -85,17 +153,17 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, case 4: break; default: - spin_unlock_irqrestore(&ar724x_pci_lock, flags); + spin_unlock_irqrestore(&apc->lock, flags); return PCIBIOS_BAD_REGISTER_NUMBER; } - spin_unlock_irqrestore(&ar724x_pci_lock, flags); + spin_unlock_irqrestore(&apc->lock, flags); if (where == PCI_BASE_ADDRESS_0 && size == 4 && - ar724x_pci_bar0_is_cached) { + apc->bar0_is_cached) { /* use the cached value */ - *value = ar724x_pci_bar0_value; + *value = apc->bar0_value; } else { *value = data; } @@ -106,12 +174,14 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, uint32_t value) { + struct ar724x_pci_controller *apc; unsigned long flags; void __iomem *base; u32 data; int s; - if (!ar724x_pci_link_up) + apc = pci_bus_to_ar724x_controller(bus); + if (!apc->link_up) return PCIBIOS_DEVICE_NOT_FOUND; if (devfn) @@ -129,18 +199,18 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, * BAR0 register in order to make the device memory * accessible. */ - ar724x_pci_bar0_is_cached = true; - ar724x_pci_bar0_value = value; + apc->bar0_is_cached = true; + apc->bar0_value = value; value = AR7240_BAR0_WAR_VALUE; } else { - ar724x_pci_bar0_is_cached = false; + apc->bar0_is_cached = false; } } - base = ar724x_pci_devcfg_base; + base = apc->devcfg_base; - spin_lock_irqsave(&ar724x_pci_lock, flags); + spin_lock_irqsave(&apc->lock, flags); data = __raw_readl(base + (where & ~3)); switch (size) { @@ -158,7 +228,7 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, data = value; break; default: - spin_unlock_irqrestore(&ar724x_pci_lock, flags); + spin_unlock_irqrestore(&apc->lock, flags); return PCIBIOS_BAD_REGISTER_NUMBER; } @@ -166,7 +236,7 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, __raw_writel(data, base + (where & ~3)); /* flush write */ __raw_readl(base + (where & ~3)); - spin_unlock_irqrestore(&ar724x_pci_lock, flags); + spin_unlock_irqrestore(&apc->lock, flags); return PCIBIOS_SUCCESSFUL; } @@ -176,38 +246,20 @@ static struct pci_ops ar724x_pci_ops = { .write = ar724x_pci_write, }; -static struct resource ar724x_io_resource = { - .name = "PCI IO space", - .start = 0, - .end = 0, - .flags = IORESOURCE_IO, -}; - -static struct resource ar724x_mem_resource = { - .name = "PCI memory space", - .start = AR724X_PCI_MEM_BASE, - .end = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct pci_controller ar724x_pci_controller = { - .pci_ops = &ar724x_pci_ops, - .io_resource = &ar724x_io_resource, - .mem_resource = &ar724x_mem_resource, -}; - static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc) { + struct ar724x_pci_controller *apc; void __iomem *base; u32 pending; - base = ar724x_pci_ctrl_base; + apc = irq_get_handler_data(irq); + base = apc->ctrl_base; pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) & __raw_readl(base + AR724X_PCI_REG_INT_MASK); if (pending & AR724X_PCI_INT_DEV0) - generic_handle_irq(ATH79_PCI_IRQ(0)); + generic_handle_irq(apc->irq_base + 0); else spurious_interrupt(); @@ -215,13 +267,17 @@ static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc) static void ar724x_pci_irq_unmask(struct irq_data *d) { + struct ar724x_pci_controller *apc; void __iomem *base; + int offset; u32 t; - base = ar724x_pci_ctrl_base; + apc = irq_data_get_irq_chip_data(d); + base = apc->ctrl_base; + offset = apc->irq_base - d->irq; - switch (d->irq) { - case ATH79_PCI_IRQ(0): + switch (offset) { + case 0: t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); __raw_writel(t | AR724X_PCI_INT_DEV0, base + AR724X_PCI_REG_INT_MASK); @@ -232,13 +288,17 @@ static void ar724x_pci_irq_unmask(struct irq_data *d) static void ar724x_pci_irq_mask(struct irq_data *d) { + struct ar724x_pci_controller *apc; void __iomem *base; + int offset; u32 t; - base = ar724x_pci_ctrl_base; + apc = irq_data_get_irq_chip_data(d); + base = apc->ctrl_base; + offset = apc->irq_base - d->irq; - switch (d->irq) { - case ATH79_PCI_IRQ(0): + switch (offset) { + case 0: t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); __raw_writel(t & ~AR724X_PCI_INT_DEV0, base + AR724X_PCI_REG_INT_MASK); @@ -262,53 +322,123 @@ static struct irq_chip ar724x_pci_irq_chip = { .irq_mask_ack = ar724x_pci_irq_mask, }; -static void __init ar724x_pci_irq_init(int irq) +static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc, + int id) { void __iomem *base; int i; - base = ar724x_pci_ctrl_base; + base = apc->ctrl_base; __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); - BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT); + apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT); - for (i = ATH79_PCI_IRQ_BASE; - i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) + for (i = apc->irq_base; + i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) { irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, handle_level_irq); + irq_set_chip_data(i, apc); + } - irq_set_chained_handler(irq, ar724x_pci_irq_handler); + irq_set_handler_data(apc->irq, apc); + irq_set_chained_handler(apc->irq, ar724x_pci_irq_handler); } -int __init ar724x_pcibios_init(int irq) +static int ar724x_pci_probe(struct platform_device *pdev) { - int ret; + struct ar724x_pci_controller *apc; + struct resource *res; + int id; - ret = -ENOMEM; + id = pdev->id; + if (id == -1) + id = 0; - ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE, - AR724X_PCI_CFG_SIZE); - if (ar724x_pci_devcfg_base == NULL) - goto err; + apc = devm_kzalloc(&pdev->dev, sizeof(struct ar724x_pci_controller), + GFP_KERNEL); + if (!apc) + return -ENOMEM; - ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE, - AR724X_PCI_CTRL_SIZE); - if (ar724x_pci_ctrl_base == NULL) - goto err_unmap_devcfg; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base"); + if (!res) + return -EINVAL; - ar724x_pci_link_up = ar724x_pci_check_link(); - if (!ar724x_pci_link_up) - pr_warn("ar724x: PCIe link is down\n"); + apc->ctrl_base = devm_request_and_ioremap(&pdev->dev, res); + if (apc->ctrl_base == NULL) + return -EBUSY; - ar724x_pci_irq_init(irq); - register_pci_controller(&ar724x_pci_controller); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base"); + if (!res) + return -EINVAL; - return PCIBIOS_SUCCESSFUL; + apc->devcfg_base = devm_request_and_ioremap(&pdev->dev, res); + if (!apc->devcfg_base) + return -EBUSY; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base"); + if (!res) + return -EINVAL; -err_unmap_devcfg: - iounmap(ar724x_pci_devcfg_base); -err: - return ret; + apc->crp_base = devm_request_and_ioremap(&pdev->dev, res); + if (apc->crp_base == NULL) + return -EBUSY; + + apc->irq = platform_get_irq(pdev, 0); + if (apc->irq < 0) + return -EINVAL; + + spin_lock_init(&apc->lock); + + res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base"); + if (!res) + return -EINVAL; + + apc->io_res.parent = res; + apc->io_res.name = "PCI IO space"; + apc->io_res.start = res->start; + apc->io_res.end = res->end; + apc->io_res.flags = IORESOURCE_IO; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base"); + if (!res) + return -EINVAL; + + apc->mem_res.parent = res; + apc->mem_res.name = "PCI memory space"; + apc->mem_res.start = res->start; + apc->mem_res.end = res->end; + apc->mem_res.flags = IORESOURCE_MEM; + + apc->pci_controller.pci_ops = &ar724x_pci_ops; + apc->pci_controller.io_resource = &apc->io_res; + apc->pci_controller.mem_resource = &apc->mem_res; + + apc->link_up = ar724x_pci_check_link(apc); + if (!apc->link_up) + dev_warn(&pdev->dev, "PCIe link is down\n"); + + ar724x_pci_irq_init(apc, id); + + ar724x_pci_local_write(apc, PCI_COMMAND, 4, AR724X_PCI_CMD_INIT); + + register_pci_controller(&apc->pci_controller); + + return 0; } + +static struct platform_driver ar724x_pci_driver = { + .probe = ar724x_pci_probe, + .driver = { + .name = "ar724x-pci", + .owner = THIS_MODULE, + }, +}; + +static int __init ar724x_pci_init(void) +{ + return platform_driver_register(&ar724x_pci_driver); +} + +postcore_initcall(ar724x_pci_init); diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index 37b52dc..e2e69e1 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -54,8 +54,8 @@ static void *cfg_space; -#define PCI_BUS_ENABLED 1 -#define PCI_DEVICE_MODE 2 +#define PCI_BUS_ENABLED 1 +#define PCI_DEVICE_MODE 2 static int bcm1480_bus_status; @@ -194,7 +194,7 @@ struct pci_controller bcm1480_controller = { .pci_ops = &bcm1480_pci_ops, .mem_resource = &bcm1480_mem_resource, .io_resource = &bcm1480_io_resource, - .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, + .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, }; @@ -227,7 +227,7 @@ static int __init bcm1480_pcibios_init(void) PCI_COMMAND)); if (!(cmdreg & PCI_COMMAND_MASTER)) { printk - ("PCI: Skipping PCI probe. Bus is not initialized.\n"); + ("PCI: Skipping PCI probe. Bus is not initialized.\n"); iounmap(cfg_space); return 1; /* XXX */ } diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c index 50cc6e9..1263c5e 100644 --- a/arch/mips/pci/pci-bcm1480ht.c +++ b/arch/mips/pci/pci-bcm1480ht.c @@ -53,8 +53,8 @@ static void *ht_cfg_space; -#define PCI_BUS_ENABLED 1 -#define PCI_DEVICE_MODE 2 +#define PCI_BUS_ENABLED 1 +#define PCI_DEVICE_MODE 2 static int bcm1480ht_bus_status; @@ -191,7 +191,7 @@ struct pci_controller bcm1480ht_controller = { .io_resource = &bcm1480ht_io_resource, .index = 1, .get_busno = bcm1480ht_pcibios_get_busno, - .io_offset = A_BCM1480_PHYS_HT_IO_MATCH_BYTES, + .io_offset = A_BCM1480_PHYS_HT_IO_MATCH_BYTES, }; static int __init bcm1480ht_pcibios_init(void) diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c index c682468..76f16ea 100644 --- a/arch/mips/pci/pci-bcm47xx.c +++ b/arch/mips/pci/pci-bcm47xx.c @@ -91,7 +91,7 @@ static int bcm47xx_pcibios_plat_dev_init_bcma(struct pci_dev *dev) int pcibios_plat_dev_init(struct pci_dev *dev) { #ifdef CONFIG_BCM47XX_SSB - if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB) + if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB) return bcm47xx_pcibios_plat_dev_init_ssb(dev); else #endif diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c index ca179b6..88e781c 100644 --- a/arch/mips/pci/pci-bcm63xx.c +++ b/arch/mips/pci/pci-bcm63xx.c @@ -25,21 +25,21 @@ int bcm63xx_pci_enabled; static struct resource bcm_pci_mem_resource = { - .name = "bcm63xx PCI memory space", - .start = BCM_PCI_MEM_BASE_PA, - .end = BCM_PCI_MEM_END_PA, - .flags = IORESOURCE_MEM + .name = "bcm63xx PCI memory space", + .start = BCM_PCI_MEM_BASE_PA, + .end = BCM_PCI_MEM_END_PA, + .flags = IORESOURCE_MEM }; static struct resource bcm_pci_io_resource = { - .name = "bcm63xx PCI IO space", - .start = BCM_PCI_IO_BASE_PA, + .name = "bcm63xx PCI IO space", + .start = BCM_PCI_IO_BASE_PA, #ifdef CONFIG_CARDBUS - .end = BCM_PCI_IO_HALF_PA, + .end = BCM_PCI_IO_HALF_PA, #else - .end = BCM_PCI_IO_END_PA, + .end = BCM_PCI_IO_END_PA, #endif - .flags = IORESOURCE_IO + .flags = IORESOURCE_IO }; struct pci_controller bcm63xx_controller = { @@ -55,17 +55,17 @@ struct pci_controller bcm63xx_controller = { */ #ifdef CONFIG_CARDBUS static struct resource bcm_cb_mem_resource = { - .name = "bcm63xx Cardbus memory space", - .start = BCM_CB_MEM_BASE_PA, - .end = BCM_CB_MEM_END_PA, - .flags = IORESOURCE_MEM + .name = "bcm63xx Cardbus memory space", + .start = BCM_CB_MEM_BASE_PA, + .end = BCM_CB_MEM_END_PA, + .flags = IORESOURCE_MEM }; static struct resource bcm_cb_io_resource = { - .name = "bcm63xx Cardbus IO space", - .start = BCM_PCI_IO_HALF_PA + 1, - .end = BCM_PCI_IO_END_PA, - .flags = IORESOURCE_IO + .name = "bcm63xx Cardbus IO space", + .start = BCM_PCI_IO_HALF_PA + 1, + .end = BCM_PCI_IO_END_PA, + .flags = IORESOURCE_IO }; struct pci_controller bcm63xx_cb_controller = { @@ -76,17 +76,17 @@ struct pci_controller bcm63xx_cb_controller = { #endif static struct resource bcm_pcie_mem_resource = { - .name = "bcm63xx PCIe memory space", - .start = BCM_PCIE_MEM_BASE_PA, - .end = BCM_PCIE_MEM_END_PA, - .flags = IORESOURCE_MEM, + .name = "bcm63xx PCIe memory space", + .start = BCM_PCIE_MEM_BASE_PA, + .end = BCM_PCIE_MEM_END_PA, + .flags = IORESOURCE_MEM, }; static struct resource bcm_pcie_io_resource = { - .name = "bcm63xx PCIe IO space", - .start = 0, - .end = 0, - .flags = 0, + .name = "bcm63xx PCIe IO space", + .start = 0, + .end = 0, + .flags = 0, }; struct pci_controller bcm63xx_pcie_controller = { @@ -111,7 +111,7 @@ static void bcm63xx_int_cfg_writel(u32 val, u32 reg) u32 tmp; tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; - tmp |= MPI_PCICFGCTL_WRITEEN_MASK; + tmp |= MPI_PCICFGCTL_WRITEEN_MASK; bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); bcm_mpi_writel(val, MPI_PCICFGDATA_REG); } @@ -211,7 +211,7 @@ static int __init bcm63xx_register_pci(void) * first bytes to access it from CPU. * * this means that no io access from CPU should happen while - * we do a configuration cycle, but there's no way we can add + * we do a configuration cycle, but there's no way we can add * a spinlock for each io access, so this is currently kind of * broken on SMP. */ @@ -244,9 +244,9 @@ static int __init bcm63xx_register_pci(void) bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG); #endif - /* setup local bus to PCI access (IO memory), we have only 1 - * IO window for both PCI and cardbus, but it cannot handle - * both at the same time, assume standard PCI for now, if + /* setup local bus to PCI access (IO memory), we have only 1 + * IO window for both PCI and cardbus, but it cannot handle + * both at the same time, assume standard PCI for now, if * cardbus card has IO zone, PCI fixup will change window to * cardbus */ val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK; @@ -284,7 +284,7 @@ static int __init bcm63xx_register_pci(void) bcm_mpi_writel(0, MPI_SP1_RANGE_REG); } - /* change host bridge retry counter to infinite number of + /* change host bridge retry counter to infinite number of * retry, needed for some broadcom wifi cards with Silicon * Backplane bus where access to srom seems very slow */ val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS); diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h index e6736d5..ffab4da 100644 --- a/arch/mips/pci/pci-bcm63xx.h +++ b/arch/mips/pci/pci-bcm63xx.h @@ -7,7 +7,7 @@ #include <bcm63xx_dev_pci.h> /* - * Cardbus shares the PCI bus, but has no IDSEL, so a special id is + * Cardbus shares the PCI bus, but has no IDSEL, so a special id is * reserved for it. If you have a standard PCI device at this id, you * need to change the following definition. */ diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index 7f4f49b..6eb65e4 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -30,7 +30,7 @@ /* * XXX: No kmalloc available when we do our crosstalk scan, - * we should try to move it later in the boot process. + * we should try to move it later in the boot process. */ static struct bridge_controller bridges[MAX_PCI_BUSSES]; @@ -103,7 +103,7 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) * swap pio's to pci mem and io space (big windows) */ bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | - BRIDGE_CTRL_MEM_SWAP; + BRIDGE_CTRL_MEM_SWAP; #ifdef CONFIG_PAGE_SIZE_4KB bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE; #else /* 16kB or larger */ @@ -123,7 +123,7 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR; bc->pci_int[slot] = -1; } - bridge->b_wid_tflush; /* wait until Bridge PIO complete */ + bridge->b_wid_tflush; /* wait until Bridge PIO complete */ bc->base = bridge; @@ -184,7 +184,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev) } /* - * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses + * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses * to find the slot number in sense of the bridge device register. * XXX This also means multiple devices might rely on conflicting bridge * settings. diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c index 532b561..b1e061f 100644 --- a/arch/mips/pci/pci-ip32.c +++ b/arch/mips/pci/pci-ip32.c @@ -18,9 +18,9 @@ /* * Handle errors from the bridge. This includes master and target aborts, - * various command and address errors, and the interrupt test. This gets - * registered on the bridge error irq. It's conceivable that some of these - * conditions warrant a panic. Anybody care to say which ones? + * various command and address errors, and the interrupt test. This gets + * registered on the bridge error irq. It's conceivable that some of these + * conditions warrant a panic. Anybody care to say which ones? */ static irqreturn_t macepci_error(int irq, void *dev) { diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index 910fb4c..879077b 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -129,8 +129,16 @@ static int ltq_pci_startup(struct platform_device *pdev) /* setup reset gpio used by pci */ reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); - if (gpio_is_valid(reset_gpio)) - devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset"); + if (gpio_is_valid(reset_gpio)) { + int ret = devm_gpio_request(&pdev->dev, + reset_gpio, "pci-reset"); + if (ret) { + dev_err(&pdev->dev, + "failed to request gpio %d\n", reset_gpio); + return ret; + } + gpio_direction_output(reset_gpio, 1); + } /* enable auto-switching between PCI and EBU */ ltq_pci_w32(0xa, PCI_CR_CLK_CTRL); diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c index a98e543..40d2797 100644 --- a/arch/mips/pci/pci-lasat.c +++ b/arch/mips/pci/pci-lasat.c @@ -51,15 +51,15 @@ static int __init lasat_pci_setup(void) arch_initcall(lasat_pci_setup); -#define LASAT_IRQ_ETH1 (LASAT_IRQ_BASE + 0) -#define LASAT_IRQ_ETH0 (LASAT_IRQ_BASE + 1) -#define LASAT_IRQ_HDC (LASAT_IRQ_BASE + 2) -#define LASAT_IRQ_COMP (LASAT_IRQ_BASE + 3) -#define LASAT_IRQ_HDLC (LASAT_IRQ_BASE + 4) -#define LASAT_IRQ_PCIA (LASAT_IRQ_BASE + 5) -#define LASAT_IRQ_PCIB (LASAT_IRQ_BASE + 6) -#define LASAT_IRQ_PCIC (LASAT_IRQ_BASE + 7) -#define LASAT_IRQ_PCID (LASAT_IRQ_BASE + 8) +#define LASAT_IRQ_ETH1 (LASAT_IRQ_BASE + 0) +#define LASAT_IRQ_ETH0 (LASAT_IRQ_BASE + 1) +#define LASAT_IRQ_HDC (LASAT_IRQ_BASE + 2) +#define LASAT_IRQ_COMP (LASAT_IRQ_BASE + 3) +#define LASAT_IRQ_HDLC (LASAT_IRQ_BASE + 4) +#define LASAT_IRQ_PCIA (LASAT_IRQ_BASE + 5) +#define LASAT_IRQ_PCIB (LASAT_IRQ_BASE + 6) +#define LASAT_IRQ_PCIC (LASAT_IRQ_BASE + 7) +#define LASAT_IRQ_PCID (LASAT_IRQ_BASE + 8) int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { @@ -69,13 +69,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) case 3: return LASAT_IRQ_PCIA + (((slot-1) + (pin-1)) % 4); case 4: - return LASAT_IRQ_ETH1; /* Ethernet 1 (LAN 2) */ + return LASAT_IRQ_ETH1; /* Ethernet 1 (LAN 2) */ case 5: - return LASAT_IRQ_ETH0; /* Ethernet 0 (LAN 1) */ + return LASAT_IRQ_ETH0; /* Ethernet 0 (LAN 1) */ case 6: - return LASAT_IRQ_HDC; /* IDE controller */ + return LASAT_IRQ_HDC; /* IDE controller */ default: - return 0xff; /* Illegal */ + return 0xff; /* Illegal */ } return -1; diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c index 5b5ed76..95c2ea8 100644 --- a/arch/mips/pci/pci-octeon.c +++ b/arch/mips/pci/pci-octeon.c @@ -30,8 +30,8 @@ * addresses. Use PCI endian swapping 1 so no address swapping is * necessary. The Linux io routines will endian swap the data. */ -#define OCTEON_PCI_IOSPACE_BASE 0x80011a0400000000ull -#define OCTEON_PCI_IOSPACE_SIZE (1ull<<32) +#define OCTEON_PCI_IOSPACE_BASE 0x80011a0400000000ull +#define OCTEON_PCI_IOSPACE_SIZE (1ull<<32) /* Octeon't PCI controller uses did=3, subdid=3 for PCI memory. */ #define OCTEON_PCI_MEMSPACE_OFFSET (0x00011b0000000000ull) @@ -68,10 +68,10 @@ enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID; * * @dev: The Linux PCI device structure for the device to map * @slot: The slot number for this device on __BUS 0__. Linux - * enumerates through all the bridges and figures out the - * slot on Bus 0 where this device eventually hooks to. + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. * @pin: The PCI interrupt pin read from the device, then swizzled - * as it goes through each bridge. + * as it goes through each bridge. * Returns Interrupt number for the device */ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) @@ -120,8 +120,8 @@ int pcibios_plat_dev_init(struct pci_dev *dev) /* Enable the PCIe normal error reporting */ config = PCI_EXP_DEVCTL_CERE; /* Correctable Error Reporting */ config |= PCI_EXP_DEVCTL_NFERE; /* Non-Fatal Error Reporting */ - config |= PCI_EXP_DEVCTL_FERE; /* Fatal Error Reporting */ - config |= PCI_EXP_DEVCTL_URRE; /* Unsupported Request */ + config |= PCI_EXP_DEVCTL_FERE; /* Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_URRE; /* Unsupported Request */ pcie_capability_set_word(dev, PCI_EXP_DEVCTL, config); /* Find the Advanced Error Reporting capability */ @@ -226,10 +226,10 @@ const char *octeon_get_pci_interrupts(void) * * @dev: The Linux PCI device structure for the device to map * @slot: The slot number for this device on __BUS 0__. Linux - * enumerates through all the bridges and figures out the - * slot on Bus 0 where this device eventually hooks to. + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. * @pin: The PCI interrupt pin read from the device, then swizzled - * as it goes through each bridge. + * as it goes through each bridge. * Returns Interrupt number for the device */ int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev, @@ -404,8 +404,8 @@ static void octeon_pci_initialize(void) ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */ ctl_status_2.s.bb_ca = 1; /* Don't use L2 with big bars */ ctl_status_2.s.bb_es = 1; /* Big bar in byte swap mode */ - ctl_status_2.s.bb1 = 1; /* BAR1 is big */ - ctl_status_2.s.bb0 = 1; /* BAR0 is big */ + ctl_status_2.s.bb1 = 1; /* BAR1 is big */ + ctl_status_2.s.bb0 = 1; /* BAR0 is big */ } octeon_npi_write32(CVMX_NPI_PCI_CTL_STATUS_2, ctl_status_2.u32); @@ -446,7 +446,7 @@ static void octeon_pci_initialize(void) * count. [1..31] and 0=32. NOTE: If the user * programs these bits beyond the Designed Maximum * outstanding count, then the designed maximum table - * depth will be used instead. No additional + * depth will be used instead. No additional * Deferred/Split transactions will be accepted if * this outstanding maximum count is * reached. Furthermore, no additional deferred/split @@ -456,7 +456,7 @@ static void octeon_pci_initialize(void) cfg19.s.tdomc = 4; /* * Master Deferred Read Request Outstanding Max Count - * (PCI only). CR4C[26:24] Max SAC cycles MAX DAC + * (PCI only). CR4C[26:24] Max SAC cycles MAX DAC * cycles 000 8 4 001 1 0 010 2 1 011 3 1 100 4 2 101 * 5 2 110 6 3 111 7 3 For example, if these bits are * programmed to 100, the core can support 2 DAC @@ -550,7 +550,7 @@ static void octeon_pci_initialize(void) /* * Affects PCI performance when OCTEON services reads to its - * BAR1/BAR2. Refer to Section 10.6.1. The recommended values are + * BAR1/BAR2. Refer to Section 10.6.1. The recommended values are * 0x22, 0x33, and 0x33 for PCI_READ_CMD_6, PCI_READ_CMD_C, and * PCI_READ_CMD_E, respectively. Unfortunately due to errata DDR-700, * these values need to be changed so they won't possibly prefetch off diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c index 5f3a69c..b128cb9 100644 --- a/arch/mips/pci/pci-rc32434.c +++ b/arch/mips/pci/pci-rc32434.c @@ -33,7 +33,7 @@ #include <asm/mach-rc32434/rc32434.h> #include <asm/mach-rc32434/pci.h> -#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 /* define an unsigned array for the PCI registers */ @@ -82,11 +82,11 @@ extern struct pci_ops rc32434_pci_ops; #define PCI_MEM2_START (PCI_ADDR_START + CPUTOPCI_MEM_WIN) #define PCI_MEM2_END (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) - 1) #define PCI_IO1_START (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN)) -#define PCI_IO1_END \ +#define PCI_IO1_END \ (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN - 1) #define PCI_IO2_START \ (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN) -#define PCI_IO2_END \ +#define PCI_IO2_END \ (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) - 1) struct pci_controller rc32434_controller2; diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index dd97f3a..cdefcc4 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -55,9 +55,9 @@ static void *cfg_space; -#define PCI_BUS_ENABLED 1 -#define LDT_BUS_ENABLED 2 -#define PCI_DEVICE_MODE 4 +#define PCI_BUS_ENABLED 1 +#define LDT_BUS_ENABLED 2 +#define PCI_DEVICE_MODE 4 static int sb1250_bus_status; @@ -239,7 +239,7 @@ static int __init sb1250_pcibios_init(void) PCI_COMMAND)); if (!(cmdreg & PCI_COMMAND_MASTER)) { printk - ("PCI: Skipping PCI probe. Bus is not initialized.\n"); + ("PCI: Skipping PCI probe. Bus is not initialized.\n"); iounmap(cfg_space); return 0; } diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c index 444b8d8..157c771 100644 --- a/arch/mips/pci/pci-vr41xx.c +++ b/arch/mips/pci/pci-vr41xx.c @@ -69,17 +69,17 @@ static struct pci_target_address_window pci_target_window1 = { }; static struct resource pci_mem_resource = { - .name = "PCI Memory resources", - .start = PCI_MEM_RESOURCE_START, - .end = PCI_MEM_RESOURCE_END, - .flags = IORESOURCE_MEM, + .name = "PCI Memory resources", + .start = PCI_MEM_RESOURCE_START, + .end = PCI_MEM_RESOURCE_END, + .flags = IORESOURCE_MEM, }; static struct resource pci_io_resource = { - .name = "PCI I/O resources", - .start = PCI_IO_RESOURCE_START, - .end = PCI_IO_RESOURCE_END, - .flags = IORESOURCE_IO, + .name = "PCI I/O resources", + .start = PCI_IO_RESOURCE_START, + .end = PCI_IO_RESOURCE_END, + .flags = IORESOURCE_IO, }; static struct pci_controller_unit_setup vr41xx_pci_controller_unit_setup = { @@ -97,7 +97,7 @@ static struct pci_controller_unit_setup vr41xx_pci_controller_unit_setup = { }; static struct pci_controller vr41xx_pci_controller = { - .pci_ops = &vr41xx_pci_ops, + .pci_ops = &vr41xx_pci_ops, .mem_resource = &pci_mem_resource, .io_resource = &pci_io_resource, }; @@ -148,7 +148,7 @@ static int __init vr41xx_pciu_init(void) else if ((vtclock / 2) < pci_clock_max) pciu_write(PCICLKSELREG, HALF_VTCLOCK); else if (current_cpu_data.processor_id >= PRID_VR4131_REV2_1 && - (vtclock / 3) < pci_clock_max) + (vtclock / 3) < pci_clock_max) pciu_write(PCICLKSELREG, ONE_THIRD_VTCLOCK); else if ((vtclock / 4) < pci_clock_max) pciu_write(PCICLKSELREG, QUARTER_VTCLOCK); @@ -281,7 +281,7 @@ static int __init vr41xx_pciu_init(void) pciu_write(PCIAPCNTREG, val); pciu_write(COMMANDREG, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER | PCI_COMMAND_PARITY | + PCI_COMMAND_MASTER | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); /* Clear bus error */ diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h index 6b1ae2e..e6b4a1b 100644 --- a/arch/mips/pci/pci-vr41xx.h +++ b/arch/mips/pci/pci-vr41xx.h @@ -1,7 +1,7 @@ /* * pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series. * - * Copyright (C) 2002 MontaVista Software Inc. + * Copyright (C) 2002 MontaVista Software Inc. * Author: Yoichi Yuasa <source@mvista.com> * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@linux-mips.org> * diff --git a/arch/mips/pci/pci-xlp.c b/arch/mips/pci/pci-xlp.c index 140557a..653d2db 100644 --- a/arch/mips/pci/pci-xlp.c +++ b/arch/mips/pci/pci-xlp.c @@ -46,6 +46,7 @@ #include <asm/netlogic/interrupt.h> #include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> #include <asm/netlogic/xlp-hal/iomap.h> #include <asm/netlogic/xlp-hal/pic.h> @@ -55,7 +56,7 @@ static void *pci_config_base; -#define pci_cfg_addr(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off)) +#define pci_cfg_addr(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off)) /* PCI ops */ static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn, @@ -64,8 +65,12 @@ static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn, u32 data; u32 *cfgaddr; + where &= ~3; + if (bus->number == 0 && PCI_SLOT(devfn) == 1 && where == 0x954) + return 0xffffffff; + cfgaddr = (u32 *)(pci_config_base + - pci_cfg_addr(bus->number, devfn, where & ~3)); + pci_cfg_addr(bus->number, devfn, where)); data = *cfgaddr; return data; } @@ -135,54 +140,60 @@ struct pci_ops nlm_pci_ops = { }; static struct resource nlm_pci_mem_resource = { - .name = "XLP PCI MEM", - .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */ - .end = 0xdfffffffUL, - .flags = IORESOURCE_MEM, + .name = "XLP PCI MEM", + .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */ + .end = 0xdfffffffUL, + .flags = IORESOURCE_MEM, }; static struct resource nlm_pci_io_resource = { - .name = "XLP IO MEM", - .start = 0x14000000UL, /* 64MB PCI IO @ 0x1000_0000 */ - .end = 0x17ffffffUL, - .flags = IORESOURCE_IO, + .name = "XLP IO MEM", + .start = 0x14000000UL, /* 64MB PCI IO @ 0x1000_0000 */ + .end = 0x17ffffffUL, + .flags = IORESOURCE_IO, }; struct pci_controller nlm_pci_controller = { - .index = 0, - .pci_ops = &nlm_pci_ops, - .mem_resource = &nlm_pci_mem_resource, - .mem_offset = 0x00000000UL, - .io_resource = &nlm_pci_io_resource, - .io_offset = 0x00000000UL, + .index = 0, + .pci_ops = &nlm_pci_ops, + .mem_resource = &nlm_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &nlm_pci_io_resource, + .io_offset = 0x00000000UL, }; -static int get_irq_vector(const struct pci_dev *dev) +static struct pci_dev *xlp_get_pcie_link(const struct pci_dev *dev) { - /* - * For XLP PCIe, there is an IRQ per Link, find out which - * link the device is on to assign interrupts - */ - if (dev->bus->self == NULL) - return 0; + struct pci_bus *bus, *p; - switch (dev->bus->self->devfn) { - case 0x8: - return PIC_PCIE_LINK_0_IRQ; - case 0x9: - return PIC_PCIE_LINK_1_IRQ; - case 0xa: - return PIC_PCIE_LINK_2_IRQ; - case 0xb: - return PIC_PCIE_LINK_3_IRQ; - } - WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn); - return 0; + /* Find the bridge on bus 0 */ + bus = dev->bus; + for (p = bus->parent; p && p->number != 0; p = p->parent) + bus = p; + + return p ? bus->self : NULL; +} + +static inline int nlm_pci_link_to_irq(int link) +{ + return PIC_PCIE_LINK_0_IRQ + link; } int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - return get_irq_vector(dev); + struct pci_dev *lnkdev; + int lnkslot, lnkfunc; + + /* + * For XLP PCIe, there is an IRQ per Link, find out which + * link the device is on to assign interrupts + */ + lnkdev = xlp_get_pcie_link(dev); + if (lnkdev == NULL) + return 0; + lnkfunc = PCI_FUNC(lnkdev->devfn); + lnkslot = PCI_SLOT(lnkdev->devfn); + return nlm_irq_to_xirq(lnkslot / 8, nlm_pci_link_to_irq(lnkfunc)); } /* Do platform specific device initialization at pci_enable_device() time */ @@ -191,51 +202,76 @@ int pcibios_plat_dev_init(struct pci_dev *dev) return 0; } -static int xlp_enable_pci_bswap(void) +/* + * If big-endian, enable hardware byteswap on the PCIe bridges. + * This will make both the SoC and PCIe devices behave consistently with + * readl/writel. + */ +#ifdef __BIG_ENDIAN +static void xlp_config_pci_bswap(int node, int link) { - uint64_t pciebase, sysbase; - int node, i; + uint64_t nbubase, lnkbase; u32 reg; - /* Chip-0 so node set to 0 */ - node = 0; - sysbase = nlm_get_bridge_regbase(node); + nbubase = nlm_get_bridge_regbase(node); + lnkbase = nlm_get_pcie_base(node, link); + /* * Enable byte swap in hardware. Program each link's PCIe SWAP regions * from the link's address ranges. */ - for (i = 0; i < 4; i++) { - pciebase = nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, i)); - if (nlm_read_pci_reg(pciebase, 0) == 0xffffffff) - continue; + reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEMEM_BASE0 + link); + nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_BASE, reg); - reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEMEM_BASE0 + i); - nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_MEM_BASE, reg); + reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEMEM_LIMIT0 + link); + nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_MEM_LIM, reg | 0xfff); - reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEMEM_LIMIT0 + i); - nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_MEM_LIM, - reg | 0xfff); + reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_BASE0 + link); + nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_BASE, reg); - reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEIO_BASE0 + i); - nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_IO_BASE, reg); - - reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEIO_LIMIT0 + i); - nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff); - } - return 0; + reg = nlm_read_bridge_reg(nbubase, BRIDGE_PCIEIO_LIMIT0 + link); + nlm_write_pci_reg(lnkbase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff); } +#else +/* Swap configuration not needed in little-endian mode */ +static inline void xlp_config_pci_bswap(int node, int link) {} +#endif /* __BIG_ENDIAN */ static int __init pcibios_init(void) { + struct nlm_soc_info *nodep; + uint64_t pciebase; + int link, n; + u32 reg; + /* Firmware assigns PCI resources */ pci_set_flags(PCI_PROBE_ONLY); pci_config_base = ioremap(XLP_DEFAULT_PCI_ECFG_BASE, 64 << 20); /* Extend IO port for memory mapped io */ - ioport_resource.start = 0; + ioport_resource.start = 0; ioport_resource.end = ~0; - xlp_enable_pci_bswap(); + for (n = 0; n < NLM_NR_NODES; n++) { + nodep = nlm_get_node(n); + if (!nodep->coremask) + continue; /* node does not exist */ + + for (link = 0; link < 4; link++) { + pciebase = nlm_get_pcie_base(n, link); + if (nlm_read_pci_reg(pciebase, 0) == 0xffffffff) + continue; + xlp_config_pci_bswap(n, link); + + /* put in intpin and irq - u-boot does not */ + reg = nlm_read_pci_reg(pciebase, 0xf); + reg &= ~0x1fu; + reg |= (1 << 8) | nlm_pci_link_to_irq(link); + nlm_write_pci_reg(pciebase, 0xf, reg); + pr_info("XLP PCIe: Link %d-%d initialized.\n", n, link); + } + } + set_io_port_base(CKSEG1); nlm_pci_controller.io_map_base = CKSEG1; diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c index 0c18ccc..4427abb 100644 --- a/arch/mips/pci/pci-xlr.c +++ b/arch/mips/pci/pci-xlr.c @@ -56,7 +56,7 @@ static void *pci_config_base; -#define pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off)) +#define pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off)) /* PCI ops */ static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn, @@ -136,26 +136,26 @@ struct pci_ops nlm_pci_ops = { }; static struct resource nlm_pci_mem_resource = { - .name = "XLR PCI MEM", - .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */ - .end = 0xdfffffffUL, - .flags = IORESOURCE_MEM, + .name = "XLR PCI MEM", + .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */ + .end = 0xdfffffffUL, + .flags = IORESOURCE_MEM, }; static struct resource nlm_pci_io_resource = { - .name = "XLR IO MEM", - .start = 0x10000000UL, /* 16MB PCI IO @ 0x1000_0000 */ - .end = 0x100fffffUL, - .flags = IORESOURCE_IO, + .name = "XLR IO MEM", + .start = 0x10000000UL, /* 16MB PCI IO @ 0x1000_0000 */ + .end = 0x100fffffUL, + .flags = IORESOURCE_IO, }; struct pci_controller nlm_pci_controller = { - .index = 0, - .pci_ops = &nlm_pci_ops, - .mem_resource = &nlm_pci_mem_resource, - .mem_offset = 0x00000000UL, - .io_resource = &nlm_pci_io_resource, - .io_offset = 0x00000000UL, + .index = 0, + .pci_ops = &nlm_pci_ops, + .mem_resource = &nlm_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &nlm_pci_io_resource, + .io_offset = 0x00000000UL, }; /* @@ -259,7 +259,7 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) MSI_ADDR_REDIRECTION_CPU; msg.data = MSI_DATA_TRIGGER_EDGE | - MSI_DATA_LEVEL_ASSERT | + MSI_DATA_LEVEL_ASSERT | MSI_DATA_DELIVERY_FIXED; ret = irq_set_msi_desc(irq, desc); @@ -344,7 +344,7 @@ static int __init pcibios_init(void) pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20); /* Extend IO port for memory mapped io */ - ioport_resource.start = 0; + ioport_resource.start = 0; ioport_resource.end = ~0; set_io_port_base(CKSEG1); diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index a184344..0872f12 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -1,6 +1,6 @@ /* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * @@ -175,9 +175,20 @@ static DEFINE_MUTEX(pci_scan_mutex); void register_pci_controller(struct pci_controller *hose) { - if (request_resource(&iomem_resource, hose->mem_resource) < 0) + struct resource *parent; + + parent = hose->mem_resource->parent; + if (!parent) + parent = &iomem_resource; + + if (request_resource(parent, hose->mem_resource) < 0) goto out; - if (request_resource(&ioport_resource, hose->io_resource) < 0) { + + parent = hose->io_resource->parent; + if (!parent) + parent = &ioport_resource; + + if (request_resource(parent, hose->io_resource) < 0) { release_resource(hose->mem_resource); goto out; } diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c index fdb4d55..5e36c33 100644 --- a/arch/mips/pci/pcie-octeon.c +++ b/arch/mips/pci/pcie-octeon.c @@ -43,7 +43,7 @@ union cvmx_pcie_address { uint64_t upper:2; /* Normally 2 for XKPHYS */ uint64_t reserved_49_61:13; /* Must be zero */ uint64_t io:1; /* 1 for IO space access */ - uint64_t did:5; /* PCIe DID = 3 */ + uint64_t did:5; /* PCIe DID = 3 */ uint64_t subdid:3; /* PCIe SubDID = 1 */ uint64_t reserved_36_39:4; /* Must be zero */ uint64_t es:2; /* Endian swap = 1 */ @@ -74,7 +74,7 @@ union cvmx_pcie_address { uint64_t upper:2; /* Normally 2 for XKPHYS */ uint64_t reserved_49_61:13; /* Must be zero */ uint64_t io:1; /* 1 for IO space access */ - uint64_t did:5; /* PCIe DID = 3 */ + uint64_t did:5; /* PCIe DID = 3 */ uint64_t subdid:3; /* PCIe SubDID = 2 */ uint64_t reserved_36_39:4; /* Must be zero */ uint64_t es:2; /* Endian swap = 1 */ @@ -85,7 +85,7 @@ union cvmx_pcie_address { uint64_t upper:2; /* Normally 2 for XKPHYS */ uint64_t reserved_49_61:13; /* Must be zero */ uint64_t io:1; /* 1 for IO space access */ - uint64_t did:5; /* PCIe DID = 3 */ + uint64_t did:5; /* PCIe DID = 3 */ uint64_t subdid:3; /* PCIe SubDID = 3-6 */ uint64_t reserved_36_39:4; /* Must be zero */ uint64_t address:36; /* PCIe Mem address */ @@ -166,7 +166,7 @@ static inline uint64_t cvmx_pcie_get_mem_size(int pcie_port) * Read a PCIe config space register indirectly. This is used for * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. * - * @pcie_port: PCIe port to read from + * @pcie_port: PCIe port to read from * @cfg_offset: Address to read * * Returns Value read @@ -194,9 +194,9 @@ static uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset) * Write a PCIe config space register indirectly. This is used for * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???. * - * @pcie_port: PCIe port to write to + * @pcie_port: PCIe port to write to * @cfg_offset: Address to write - * @val: Value to write + * @val: Value to write */ static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset, uint32_t val) @@ -222,7 +222,7 @@ static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset, * @pcie_port: PCIe port to access * @bus: Sub bus * @dev: Device ID - * @fn: Device sub function + * @fn: Device sub function * @reg: Register to access * * Returns 64bit Octeon IO address @@ -259,7 +259,7 @@ static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus, * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID - * @fn: Device sub function + * @fn: Device sub function * @reg: Register to access * * Returns Result of the read @@ -281,7 +281,7 @@ static uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev, * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID - * @fn: Device sub function + * @fn: Device sub function * @reg: Register to access * * Returns Result of the read @@ -303,7 +303,7 @@ static uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev, * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID - * @fn: Device sub function + * @fn: Device sub function * @reg: Register to access * * Returns Result of the read @@ -325,7 +325,7 @@ static uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev, * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID - * @fn: Device sub function + * @fn: Device sub function * @reg: Register to access * @val: Value to write */ @@ -344,7 +344,7 @@ static void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn, * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID - * @fn: Device sub function + * @fn: Device sub function * @reg: Register to access * @val: Value to write */ @@ -363,7 +363,7 @@ static void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn, * @pcie_port: PCIe port the device is on * @bus: Sub bus * @dev: Device ID - * @fn: Device sub function + * @fn: Device sub function * @reg: Register to access * @val: Value to write */ @@ -883,14 +883,14 @@ retry: /* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */ npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL); - npei_mem_access_ctl.s.max_word = 0; /* Allow 16 words to combine */ - npei_mem_access_ctl.s.timer = 127; /* Wait up to 127 cycles for more data */ + npei_mem_access_ctl.s.max_word = 0; /* Allow 16 words to combine */ + npei_mem_access_ctl.s.timer = 127; /* Wait up to 127 cycles for more data */ cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64); /* Setup Mem access SubDIDs */ mem_access_subid.u64 = 0; mem_access_subid.s.port = pcie_port; /* Port the request is sent to. */ - mem_access_subid.s.nmerge = 1; /* Due to an errata on pass 1 chips, no merging is allowed. */ + mem_access_subid.s.nmerge = 1; /* Due to an errata on pass 1 chips, no merging is allowed. */ mem_access_subid.s.esr = 1; /* Endian-swap for Reads. */ mem_access_subid.s.esw = 1; /* Endian-swap for Writes. */ mem_access_subid.s.nsr = 0; /* Enable Snooping for Reads. Octeon doesn't care, but devices might want this more conservative setting */ @@ -926,7 +926,7 @@ retry: bar1_index.u32 = 0; bar1_index.s.addr_idx = (CVMX_PCIE_BAR1_PHYS_BASE >> 22); - bar1_index.s.ca = 1; /* Not Cached */ + bar1_index.s.ca = 1; /* Not Cached */ bar1_index.s.end_swp = 1; /* Endian Swap mode */ bar1_index.s.addr_v = 1; /* Valid entry */ @@ -1342,11 +1342,11 @@ static int __cvmx_pcie_rc_initialize_gen2(int pcie_port) /* Setup Mem access SubDIDs */ mem_access_subid.u64 = 0; mem_access_subid.s.port = pcie_port; /* Port the request is sent to. */ - mem_access_subid.s.nmerge = 0; /* Allow merging as it works on CN6XXX. */ - mem_access_subid.s.esr = 1; /* Endian-swap for Reads. */ - mem_access_subid.s.esw = 1; /* Endian-swap for Writes. */ - mem_access_subid.s.wtype = 0; /* "No snoop" and "Relaxed ordering" are not set */ - mem_access_subid.s.rtype = 0; /* "No snoop" and "Relaxed ordering" are not set */ + mem_access_subid.s.nmerge = 0; /* Allow merging as it works on CN6XXX. */ + mem_access_subid.s.esr = 1; /* Endian-swap for Reads. */ + mem_access_subid.s.esw = 1; /* Endian-swap for Writes. */ + mem_access_subid.s.wtype = 0; /* "No snoop" and "Relaxed ordering" are not set */ + mem_access_subid.s.rtype = 0; /* "No snoop" and "Relaxed ordering" are not set */ /* PCIe Adddress Bits <63:34>. */ if (OCTEON_IS_MODEL(OCTEON_CN68XX)) mem_access_subid.cn68xx.ba = 0; @@ -1409,7 +1409,7 @@ static int __cvmx_pcie_rc_initialize_gen2(int pcie_port) bar1_index.u64 = 0; bar1_index.s.addr_idx = (CVMX_PCIE_BAR1_PHYS_BASE >> 22); - bar1_index.s.ca = 1; /* Not Cached */ + bar1_index.s.ca = 1; /* Not Cached */ bar1_index.s.end_swp = 1; /* Endian Swap mode */ bar1_index.s.addr_v = 1; /* Valid entry */ @@ -1458,10 +1458,10 @@ static int cvmx_pcie_rc_initialize(int pcie_port) * * @dev: The Linux PCI device structure for the device to map * @slot: The slot number for this device on __BUS 0__. Linux - * enumerates through all the bridges and figures out the - * slot on Bus 0 where this device eventually hooks to. + * enumerates through all the bridges and figures out the + * slot on Bus 0 where this device eventually hooks to. * @pin: The PCI interrupt pin read from the device, then swizzled - * as it goes through each bridge. + * as it goes through each bridge. * Returns Interrupt number for the device */ int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, @@ -1503,7 +1503,7 @@ int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev, return pin - 1 + OCTEON_IRQ_PCI_INT0; } -static void set_cfg_read_retry(u32 retry_cnt) +static void set_cfg_read_retry(u32 retry_cnt) { union cvmx_pemx_ctl_status pemx_ctl; pemx_ctl.u64 = cvmx_read_csr(CVMX_PEMX_CTL_STATUS(1)); @@ -1931,7 +1931,7 @@ static int __init octeon_pcie_setup(void) OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) { sriox_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(0)); if (sriox_status_reg.s.srio) { - srio_war15205 += 1; /* Port is SRIO */ + srio_war15205 += 1; /* Port is SRIO */ port = 0; } } @@ -2004,7 +2004,7 @@ static int __init octeon_pcie_setup(void) OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_0)) { sriox_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(1)); if (sriox_status_reg.s.srio) { - srio_war15205 += 1; /* Port is SRIO */ + srio_war15205 += 1; /* Port is SRIO */ port = 1; } } diff --git a/arch/mips/pmc-sierra/Platform b/arch/mips/pmc-sierra/Platform deleted file mode 100644 index 387fda6..0000000 --- a/arch/mips/pmc-sierra/Platform +++ /dev/null @@ -1,7 +0,0 @@ -# -# PMC-Sierra MSP SOCs -# -platform-$(CONFIG_PMC_MSP) += pmc-sierra/msp71xx/ -cflags-$(CONFIG_PMC_MSP) += -I$(srctree)/arch/mips/include/asm/pmc-sierra/msp71xx \ - -mno-branch-likely -load-$(CONFIG_PMC_MSP) += 0xffffffff80100000 diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig index 3482b8c..3482b8c 100644 --- a/arch/mips/pmc-sierra/Kconfig +++ b/arch/mips/pmcs-msp71xx/Kconfig diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmcs-msp71xx/Makefile index cefba77..cefba77 100644 --- a/arch/mips/pmc-sierra/msp71xx/Makefile +++ b/arch/mips/pmcs-msp71xx/Makefile diff --git a/arch/mips/pmcs-msp71xx/Platform b/arch/mips/pmcs-msp71xx/Platform new file mode 100644 index 0000000..7af0734 --- /dev/null +++ b/arch/mips/pmcs-msp71xx/Platform @@ -0,0 +1,7 @@ +# +# PMC-Sierra MSP SOCs +# +platform-$(CONFIG_PMC_MSP) += pmcs-msp71xx/ +cflags-$(CONFIG_PMC_MSP) += -I$(srctree)/arch/mips/include/asm/mach-pmcs-msp71xx \ + -mno-branch-likely +load-$(CONFIG_PMC_MSP) += 0xffffffff80100000 diff --git a/arch/mips/pmc-sierra/msp71xx/gpio.c b/arch/mips/pmcs-msp71xx/gpio.c index aaccbe5..aaccbe5 100644 --- a/arch/mips/pmc-sierra/msp71xx/gpio.c +++ b/arch/mips/pmcs-msp71xx/gpio.c diff --git a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c b/arch/mips/pmcs-msp71xx/gpio_extended.c index 2a99f36..2a99f36 100644 --- a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c +++ b/arch/mips/pmcs-msp71xx/gpio_extended.c diff --git a/arch/mips/pmc-sierra/msp71xx/msp_elb.c b/arch/mips/pmcs-msp71xx/msp_elb.c index 3e96410..3e96410 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_elb.c +++ b/arch/mips/pmcs-msp71xx/msp_elb.c diff --git a/arch/mips/pmc-sierra/msp71xx/msp_eth.c b/arch/mips/pmcs-msp71xx/msp_eth.c index c584df3..c584df3 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_eth.c +++ b/arch/mips/pmcs-msp71xx/msp_eth.c diff --git a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c b/arch/mips/pmcs-msp71xx/msp_hwbutton.c index bb57ed9..bb57ed9 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c +++ b/arch/mips/pmcs-msp71xx/msp_hwbutton.c diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c index d3c3d81..9da5619 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq.c +++ b/arch/mips/pmcs-msp71xx/msp_irq.c @@ -41,9 +41,9 @@ static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); } /* * The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded - * hierarchical system. The first level are the direct MIPS interrupts + * hierarchical system. The first level are the direct MIPS interrupts * and are assigned the interrupt range 0-7. The second level is the SLM - * interrupt controller and is assigned the range 8-39. The third level + * interrupt controller and is assigned the range 8-39. The third level * comprises the Peripherial block, the PCI block, the PCI MSI block and * the SLP. The PCI interrupts and the SLP errors are handled by the * relevant subsystems so the core interrupt code needs only concern diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c b/arch/mips/pmcs-msp71xx/msp_irq_cic.c index 2e6f7ca..e49b499 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c +++ b/arch/mips/pmcs-msp71xx/msp_irq_cic.c @@ -3,8 +3,8 @@ * * This file define the irq handler for MSP CIC subsystem interrupts. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -171,7 +171,7 @@ void __init msp_cic_irq_init(void) /* Mask/clear interrupts. */ *CIC_VPE0_MSK_REG = 0x00000000; *CIC_VPE1_MSK_REG = 0x00000000; - *CIC_STS_REG = 0xFFFFFFFF; + *CIC_STS_REG = 0xFFFFFFFF; /* * The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI. * These inputs map to EXT_INT_POL[6:4] inside the CIC. diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c b/arch/mips/pmcs-msp71xx/msp_irq_per.c index 598b6a6..d1fd530 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c +++ b/arch/mips/pmcs-msp71xx/msp_irq_per.c @@ -3,8 +3,8 @@ * * This file define the irq handler for MSP PER subsystem interrupts. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmcs-msp71xx/msp_irq_slp.c index 83a1c5e..5f66a76 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c +++ b/arch/mips/pmcs-msp71xx/msp_irq_slp.c @@ -4,8 +4,8 @@ * Copyright 2005-2006 PMC-Sierra, Inc, derived from irq_cpu.c * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/pmc-sierra/msp71xx/msp_pci.c b/arch/mips/pmcs-msp71xx/msp_pci.c index f764fe7..428dea2 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_pci.c +++ b/arch/mips/pmcs-msp71xx/msp_pci.c @@ -36,7 +36,7 @@ static int __init msp_pci_setup(void) #if 0 /* Linux 2.6 initialization code to be completed */ if (getdeviceid() & DEV_ID_SINGLE_PC) { /* If single card mode */ - slmRegs *sreg = (slmRegs *) SREG_BASE; + slmRegs *sreg = (slmRegs *) SREG_BASE; sreg->single_pc_enable = SINGLE_PCCARD; } diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c index db00deb..0edb89a 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_prom.c +++ b/arch/mips/pmcs-msp71xx/msp_prom.c @@ -99,7 +99,7 @@ static inline int str2eaddr(unsigned char *ea, unsigned char *str) } } - if (index == 5) { + if (index == 5) { ea[index++] = num; return 0; } else @@ -285,7 +285,7 @@ EXPORT_SYMBOL(identify_revision); char *prom_getenv(char *env_name) { /* - * Return a pointer to the given environment variable. prom_envp + * Return a pointer to the given environment variable. prom_envp * points to a null terminated array of pointers to variables. * Environment variables are stored in the form of "memsize=64" */ diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c index a1c7c7d..d304be2 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c +++ b/arch/mips/pmcs-msp71xx/msp_serial.c @@ -90,8 +90,8 @@ static int msp_serial_handle_irq(struct uart_port *p) void __init msp_serial_setup(void) { - char *s; - char *endp; + char *s; + char *endp; struct uart_port up; unsigned int uartclk; @@ -104,19 +104,19 @@ void __init msp_serial_setup(void) ppfinit("UART clock set to %d\n", uartclk); /* Initialize first serial port */ - up.mapbase = MSP_UART0_BASE; - up.membase = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN); - up.irq = MSP_INT_UART0; - up.uartclk = uartclk; - up.regshift = 2; - up.iotype = UPIO_MEM; - up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; - up.type = PORT_16550A; - up.line = 0; + up.mapbase = MSP_UART0_BASE; + up.membase = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN); + up.irq = MSP_INT_UART0; + up.uartclk = uartclk; + up.regshift = 2; + up.iotype = UPIO_MEM; + up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + up.type = PORT_16550A; + up.line = 0; up.serial_out = msp_serial_out; up.serial_in = msp_serial_in; up.handle_irq = msp_serial_handle_irq; - up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL); + up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL); if (!up.private_data) { pr_err("failed to allocate uart private data\n"); return; @@ -142,10 +142,10 @@ void __init msp_serial_setup(void) return; /* No second serial port, good-bye. */ } - up.mapbase = MSP_UART1_BASE; - up.membase = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN); - up.irq = MSP_INT_UART1; - up.line = 1; + up.mapbase = MSP_UART1_BASE; + up.membase = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN); + up.irq = MSP_INT_UART1; + up.line = 1; up.private_data = (void*)UART1_STATUS_REG; if (early_serial_setup(&up)) { kfree(up.private_data); diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c index 7a834b2..1651cfd 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c +++ b/arch/mips/pmcs-msp71xx/msp_setup.c @@ -4,8 +4,8 @@ * Copyright 2005-2007 PMC-Sierra, Inc, * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -168,7 +168,7 @@ void __init prom_init(void) family = identify_family(); revision = identify_revision(); - switch (family) { + switch (family) { case FAMILY_FPGA: if (FPGA_IS_MSP4200(revision)) { /* Old-style revision ID */ @@ -219,7 +219,7 @@ void __init prom_init(void) /* * Sub-system setup follows. - * Setup functions can either be called here or using the + * Setup functions can either be called here or using the * subsys_initcall mechanism (i.e. see msp_pci_setup). The * order in which they are called can be changed by using the * link order in arch/mips/pmc-sierra/msp71xx/Makefile. diff --git a/arch/mips/pmc-sierra/msp71xx/msp_smp.c b/arch/mips/pmcs-msp71xx/msp_smp.c index 1017058..1017058 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_smp.c +++ b/arch/mips/pmcs-msp71xx/msp_smp.c diff --git a/arch/mips/pmc-sierra/msp71xx/msp_smtc.c b/arch/mips/pmcs-msp71xx/msp_smtc.c index c8dcc1c..c8dcc1c 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_smtc.c +++ b/arch/mips/pmcs-msp71xx/msp_smtc.c diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c index 8b42f30..8f12ecc 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_time.c +++ b/arch/mips/pmcs-msp71xx/msp_time.c @@ -45,7 +45,7 @@ static int tim_installed; void __init plat_time_init(void) { - char *endp, *s; + char *endp, *s; unsigned long cpu_rate = 0; if (cpu_rate == 0) { diff --git a/arch/mips/pmc-sierra/msp71xx/msp_usb.c b/arch/mips/pmcs-msp71xx/msp_usb.c index 9a1aef8..4dab915 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_usb.c +++ b/arch/mips/pmcs-msp71xx/msp_usb.c @@ -40,14 +40,14 @@ #if defined(CONFIG_USB_EHCI_HCD) static struct resource msp_usbhost0_resources[] = { [0] = { /* EHCI-HS operational and capabilities registers */ - .start = MSP_USB0_HS_START, - .end = MSP_USB0_HS_END, - .flags = IORESOURCE_MEM, + .start = MSP_USB0_HS_START, + .end = MSP_USB0_HS_END, + .flags = IORESOURCE_MEM, }, [1] = { - .start = MSP_INT_USB, - .end = MSP_INT_USB, - .flags = IORESOURCE_IRQ, + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, }, [2] = { /* MSBus-to-AMBA bridge register space */ .start = MSP_USB0_MAB_START, @@ -71,8 +71,8 @@ static struct mspusb_device msp_usbhost0_device = { .dma_mask = &msp_usbhost0_dma_mask, .coherent_dma_mask = 0xffffffffUL, }, - .num_resources = ARRAY_SIZE(msp_usbhost0_resources), - .resource = msp_usbhost0_resources, + .num_resources = ARRAY_SIZE(msp_usbhost0_resources), + .resource = msp_usbhost0_resources, }, }; @@ -121,14 +121,14 @@ static struct mspusb_device msp_usbhost1_device = { #if defined(CONFIG_USB_GADGET) static struct resource msp_usbdev0_resources[] = { [0] = { /* EHCI-HS operational and capabilities registers */ - .start = MSP_USB0_HS_START, - .end = MSP_USB0_HS_END, - .flags = IORESOURCE_MEM, + .start = MSP_USB0_HS_START, + .end = MSP_USB0_HS_END, + .flags = IORESOURCE_MEM, }, [1] = { - .start = MSP_INT_USB, - .end = MSP_INT_USB, - .flags = IORESOURCE_IRQ, + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, }, [2] = { /* MSBus-to-AMBA bridge register space */ .start = MSP_USB0_MAB_START, @@ -153,22 +153,22 @@ static struct mspusb_device msp_usbdev0_device = { .dma_mask = &msp_usbdev_dma_mask, .coherent_dma_mask = 0xffffffffUL, }, - .num_resources = ARRAY_SIZE(msp_usbdev0_resources), - .resource = msp_usbdev0_resources, + .num_resources = ARRAY_SIZE(msp_usbdev0_resources), + .resource = msp_usbdev0_resources, }, }; #ifdef CONFIG_MSP_HAS_DUAL_USB static struct resource msp_usbdev1_resources[] = { [0] = { /* EHCI-HS operational and capabilities registers */ - .start = MSP_USB1_HS_START, - .end = MSP_USB1_HS_END, - .flags = IORESOURCE_MEM, + .start = MSP_USB1_HS_START, + .end = MSP_USB1_HS_END, + .flags = IORESOURCE_MEM, }, [1] = { - .start = MSP_INT_USB, - .end = MSP_INT_USB, - .flags = IORESOURCE_IRQ, + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, }, [2] = { /* MSBus-to-AMBA bridge register space */ .start = MSP_USB1_MAB_START, @@ -191,8 +191,8 @@ static struct mspusb_device msp_usbdev1_device = { .dma_mask = &msp_usbdev_dma_mask, .coherent_dma_mask = 0xffffffffUL, }, - .num_resources = ARRAY_SIZE(msp_usbdev1_resources), - .resource = msp_usbdev1_resources, + .num_resources = ARRAY_SIZE(msp_usbdev1_resources), + .resource = msp_usbdev1_resources, }, }; @@ -211,7 +211,7 @@ static int __init msp_usb_setup(void) /* * Could this perhaps be integrated into the "features" env var? * Use the features key "U", and follow with "H" for host-mode, - * "D" for device-mode. If it works for Ethernet, why not USB... + * "D" for device-mode. If it works for Ethernet, why not USB... * -- hammtrev, 2007/03/22 */ snprintf((char *)&envstr[0], sizeof(envstr), "usbmode"); @@ -237,7 +237,7 @@ static int __init msp_usb_setup(void) #endif #else ppfinit("%s: echi_hcd not supported\n", __FILE__); -#endif /* CONFIG_USB_EHCI_HCD */ +#endif /* CONFIG_USB_EHCI_HCD */ } else { #if defined(CONFIG_USB_GADGET) /* get device mode structure */ @@ -251,7 +251,7 @@ static int __init msp_usb_setup(void) #endif #else ppfinit("%s: usb_gadget not supported\n", __FILE__); -#endif /* CONFIG_USB_GADGET */ +#endif /* CONFIG_USB_GADGET */ } /* add device */ platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs)); diff --git a/arch/mips/pnx833x/Platform b/arch/mips/pnx833x/Platform index 7e6ec4d..794526c 100644 --- a/arch/mips/pnx833x/Platform +++ b/arch/mips/pnx833x/Platform @@ -1,5 +1,5 @@ # NXP STB225 platform-$(CONFIG_SOC_PNX833X) += pnx833x/ -cflags-$(CONFIG_SOC_PNX833X) += -Iarch/mips/include/asm/mach-pnx833x +cflags-$(CONFIG_SOC_PNX833X) += -Iarch/mips/include/asm/mach-pnx833x load-$(CONFIG_NXP_STB220) += 0xffffffff80001000 load-$(CONFIG_NXP_STB225) += 0xffffffff80001000 diff --git a/arch/mips/pnx833x/common/interrupts.c b/arch/mips/pnx833x/common/interrupts.c index a86d5d5..a4a9059 100644 --- a/arch/mips/pnx833x/common/interrupts.c +++ b/arch/mips/pnx833x/common/interrupts.c @@ -35,64 +35,64 @@ static int mips_cpu_timer_irq; static const unsigned int irq_prio[PNX833X_PIC_NUM_IRQ] = { 0, /* unused */ - 4, /* PNX833X_PIC_I2C0_INT 1 */ - 4, /* PNX833X_PIC_I2C1_INT 2 */ - 1, /* PNX833X_PIC_UART0_INT 3 */ - 1, /* PNX833X_PIC_UART1_INT 4 */ - 6, /* PNX833X_PIC_TS_IN0_DV_INT 5 */ - 6, /* PNX833X_PIC_TS_IN0_DMA_INT 6 */ - 7, /* PNX833X_PIC_GPIO_INT 7 */ - 4, /* PNX833X_PIC_AUDIO_DEC_INT 8 */ - 5, /* PNX833X_PIC_VIDEO_DEC_INT 9 */ - 4, /* PNX833X_PIC_CONFIG_INT 10 */ - 4, /* PNX833X_PIC_AOI_INT 11 */ - 9, /* PNX833X_PIC_SYNC_INT 12 */ - 9, /* PNX8335_PIC_SATA_INT 13 */ - 4, /* PNX833X_PIC_OSD_INT 14 */ - 9, /* PNX833X_PIC_DISP1_INT 15 */ - 4, /* PNX833X_PIC_DEINTERLACER_INT 16 */ - 9, /* PNX833X_PIC_DISPLAY2_INT 17 */ - 4, /* PNX833X_PIC_VC_INT 18 */ - 4, /* PNX833X_PIC_SC_INT 19 */ - 9, /* PNX833X_PIC_IDE_INT 20 */ - 9, /* PNX833X_PIC_IDE_DMA_INT 21 */ - 6, /* PNX833X_PIC_TS_IN1_DV_INT 22 */ - 6, /* PNX833X_PIC_TS_IN1_DMA_INT 23 */ - 4, /* PNX833X_PIC_SGDX_DMA_INT 24 */ - 4, /* PNX833X_PIC_TS_OUT_INT 25 */ - 4, /* PNX833X_PIC_IR_INT 26 */ - 3, /* PNX833X_PIC_VMSP1_INT 27 */ - 3, /* PNX833X_PIC_VMSP2_INT 28 */ - 4, /* PNX833X_PIC_PIBC_INT 29 */ - 4, /* PNX833X_PIC_TS_IN0_TRD_INT 30 */ - 4, /* PNX833X_PIC_SGDX_TPD_INT 31 */ - 5, /* PNX833X_PIC_USB_INT 32 */ - 4, /* PNX833X_PIC_TS_IN1_TRD_INT 33 */ - 4, /* PNX833X_PIC_CLOCK_INT 34 */ - 4, /* PNX833X_PIC_SGDX_PARSER_INT 35 */ - 4, /* PNX833X_PIC_VMSP_DMA_INT 36 */ + 4, /* PNX833X_PIC_I2C0_INT 1 */ + 4, /* PNX833X_PIC_I2C1_INT 2 */ + 1, /* PNX833X_PIC_UART0_INT 3 */ + 1, /* PNX833X_PIC_UART1_INT 4 */ + 6, /* PNX833X_PIC_TS_IN0_DV_INT 5 */ + 6, /* PNX833X_PIC_TS_IN0_DMA_INT 6 */ + 7, /* PNX833X_PIC_GPIO_INT 7 */ + 4, /* PNX833X_PIC_AUDIO_DEC_INT 8 */ + 5, /* PNX833X_PIC_VIDEO_DEC_INT 9 */ + 4, /* PNX833X_PIC_CONFIG_INT 10 */ + 4, /* PNX833X_PIC_AOI_INT 11 */ + 9, /* PNX833X_PIC_SYNC_INT 12 */ + 9, /* PNX8335_PIC_SATA_INT 13 */ + 4, /* PNX833X_PIC_OSD_INT 14 */ + 9, /* PNX833X_PIC_DISP1_INT 15 */ + 4, /* PNX833X_PIC_DEINTERLACER_INT 16 */ + 9, /* PNX833X_PIC_DISPLAY2_INT 17 */ + 4, /* PNX833X_PIC_VC_INT 18 */ + 4, /* PNX833X_PIC_SC_INT 19 */ + 9, /* PNX833X_PIC_IDE_INT 20 */ + 9, /* PNX833X_PIC_IDE_DMA_INT 21 */ + 6, /* PNX833X_PIC_TS_IN1_DV_INT 22 */ + 6, /* PNX833X_PIC_TS_IN1_DMA_INT 23 */ + 4, /* PNX833X_PIC_SGDX_DMA_INT 24 */ + 4, /* PNX833X_PIC_TS_OUT_INT 25 */ + 4, /* PNX833X_PIC_IR_INT 26 */ + 3, /* PNX833X_PIC_VMSP1_INT 27 */ + 3, /* PNX833X_PIC_VMSP2_INT 28 */ + 4, /* PNX833X_PIC_PIBC_INT 29 */ + 4, /* PNX833X_PIC_TS_IN0_TRD_INT 30 */ + 4, /* PNX833X_PIC_SGDX_TPD_INT 31 */ + 5, /* PNX833X_PIC_USB_INT 32 */ + 4, /* PNX833X_PIC_TS_IN1_TRD_INT 33 */ + 4, /* PNX833X_PIC_CLOCK_INT 34 */ + 4, /* PNX833X_PIC_SGDX_PARSER_INT 35 */ + 4, /* PNX833X_PIC_VMSP_DMA_INT 36 */ #if defined(CONFIG_SOC_PNX8335) - 4, /* PNX8335_PIC_MIU_INT 37 */ - 4, /* PNX8335_PIC_AVCHIP_IRQ_INT 38 */ - 9, /* PNX8335_PIC_SYNC_HD_INT 39 */ - 9, /* PNX8335_PIC_DISP_HD_INT 40 */ - 9, /* PNX8335_PIC_DISP_SCALER_INT 41 */ - 4, /* PNX8335_PIC_OSD_HD1_INT 42 */ - 4, /* PNX8335_PIC_DTL_WRITER_Y_INT 43 */ - 4, /* PNX8335_PIC_DTL_WRITER_C_INT 44 */ + 4, /* PNX8335_PIC_MIU_INT 37 */ + 4, /* PNX8335_PIC_AVCHIP_IRQ_INT 38 */ + 9, /* PNX8335_PIC_SYNC_HD_INT 39 */ + 9, /* PNX8335_PIC_DISP_HD_INT 40 */ + 9, /* PNX8335_PIC_DISP_SCALER_INT 41 */ + 4, /* PNX8335_PIC_OSD_HD1_INT 42 */ + 4, /* PNX8335_PIC_DTL_WRITER_Y_INT 43 */ + 4, /* PNX8335_PIC_DTL_WRITER_C_INT 44 */ 4, /* PNX8335_PIC_DTL_EMULATOR_Y_IR_INT 45 */ 4, /* PNX8335_PIC_DTL_EMULATOR_C_IR_INT 46 */ - 4, /* PNX8335_PIC_DENC_TTX_INT 47 */ - 4, /* PNX8335_PIC_MMI_SIF0_INT 48 */ - 4, /* PNX8335_PIC_MMI_SIF1_INT 49 */ - 4, /* PNX8335_PIC_MMI_CDMMU_INT 50 */ - 4, /* PNX8335_PIC_PIBCS_INT 51 */ - 12, /* PNX8335_PIC_ETHERNET_INT 52 */ - 3, /* PNX8335_PIC_VMSP1_0_INT 53 */ - 3, /* PNX8335_PIC_VMSP1_1_INT 54 */ - 4, /* PNX8335_PIC_VMSP1_DMA_INT 55 */ - 4, /* PNX8335_PIC_TDGR_DE_INT 56 */ - 4, /* PNX8335_PIC_IR1_IRQ_INT 57 */ + 4, /* PNX8335_PIC_DENC_TTX_INT 47 */ + 4, /* PNX8335_PIC_MMI_SIF0_INT 48 */ + 4, /* PNX8335_PIC_MMI_SIF1_INT 49 */ + 4, /* PNX8335_PIC_MMI_CDMMU_INT 50 */ + 4, /* PNX8335_PIC_PIBCS_INT 51 */ + 12, /* PNX8335_PIC_ETHERNET_INT 52 */ + 3, /* PNX8335_PIC_VMSP1_0_INT 53 */ + 3, /* PNX8335_PIC_VMSP1_1_INT 54 */ + 4, /* PNX8335_PIC_VMSP1_DMA_INT 55 */ + 4, /* PNX8335_PIC_TDGR_DE_INT 56 */ + 4, /* PNX8335_PIC_IR1_IRQ_INT 57 */ #endif }; diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c index 05a1d92..d22dc0d 100644 --- a/arch/mips/pnx833x/common/platform.c +++ b/arch/mips/pnx833x/common/platform.c @@ -6,7 +6,7 @@ * Daniel Laird <daniel.j.laird@nxp.com> * * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -42,7 +42,7 @@ #include <irq-mapping.h> #include <pnx833x.h> -static u64 uart_dmamask = DMA_BIT_MASK(32); +static u64 uart_dmamask = DMA_BIT_MASK(32); static struct resource pnx833x_uart_resources[] = { [0] = { @@ -69,7 +69,7 @@ static struct resource pnx833x_uart_resources[] = { struct pnx8xxx_port pnx8xxx_ports[] = { [0] = { - .port = { + .port = { .type = PORT_PNX8XXX, .iotype = UPIO_MEM, .membase = (void __iomem *)PNX833X_UART0_PORTS_START, @@ -82,7 +82,7 @@ struct pnx8xxx_port pnx8xxx_ports[] = { }, }, [1] = { - .port = { + .port = { .type = PORT_PNX8XXX, .iotype = UPIO_MEM, .membase = (void __iomem *)PNX833X_UART1_PORTS_START, @@ -108,7 +108,7 @@ static struct platform_device pnx833x_uart_device = { .resource = pnx833x_uart_resources, }; -static u64 ehci_dmamask = DMA_BIT_MASK(32); +static u64 ehci_dmamask = DMA_BIT_MASK(32); static struct resource pnx833x_usb_ehci_resources[] = { [0] = { @@ -183,7 +183,7 @@ static struct platform_device pnx833x_i2c0_device = { .dev = { .platform_data = &pnx833x_i2c_dev[0], }, - .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources), + .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources), .resource = pnx833x_i2c0_resources, }; @@ -193,7 +193,7 @@ static struct platform_device pnx833x_i2c1_device = { .dev = { .platform_data = &pnx833x_i2c_dev[1], }, - .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources), + .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources), .resource = pnx833x_i2c1_resources, }; #endif @@ -217,7 +217,7 @@ static struct platform_device pnx833x_ethernet_device = { .name = "ip3902-eth", .id = -1, .dev = { - .dma_mask = ðernet_dmamask, + .dma_mask = ðernet_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources), @@ -238,8 +238,8 @@ static struct resource pnx833x_sata_resources[] = { }; static struct platform_device pnx833x_sata_device = { - .name = "pnx833x-sata", - .id = -1, + .name = "pnx833x-sata", + .id = -1, .num_resources = ARRAY_SIZE(pnx833x_sata_resources), .resource = pnx833x_sata_resources, }; @@ -265,7 +265,7 @@ static struct platform_nand_data pnx833x_flash_nand_data = { .chip_delay = 25, }, .ctrl = { - .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl + .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl } }; @@ -274,17 +274,17 @@ static struct platform_nand_data pnx833x_flash_nand_data = { * 12 bytes more seems to be the standard that allows for NAND access. */ static struct resource pnx833x_flash_nand_resource = { - .start = PNX8335_NAND_BASE, - .end = PNX8335_NAND_BASE + 12, - .flags = IORESOURCE_MEM, + .start = PNX8335_NAND_BASE, + .end = PNX8335_NAND_BASE + 12, + .flags = IORESOURCE_MEM, }; static struct platform_device pnx833x_flash_nand = { - .name = "gen_nand", - .id = -1, + .name = "gen_nand", + .id = -1, .num_resources = 1, .resource = &pnx833x_flash_nand_resource, - .dev = { + .dev = { .platform_data = &pnx833x_flash_nand_data, }, }; diff --git a/arch/mips/pnx833x/common/prom.c b/arch/mips/pnx833x/common/prom.c index 29969f9..dfafdd7 100644 --- a/arch/mips/pnx833x/common/prom.c +++ b/arch/mips/pnx833x/common/prom.c @@ -6,7 +6,7 @@ * Daniel Laird <daniel.j.laird@nxp.com> * * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pnx833x/common/reset.c b/arch/mips/pnx833x/common/reset.c index e0ea96d..5cc9a9b 100644 --- a/arch/mips/pnx833x/common/reset.c +++ b/arch/mips/pnx833x/common/reset.c @@ -6,7 +6,7 @@ * Daniel Laird <daniel.j.laird@nxp.com> * * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pnx833x/common/setup.c b/arch/mips/pnx833x/common/setup.c index e51fbc4..99b4d94 100644 --- a/arch/mips/pnx833x/common/setup.c +++ b/arch/mips/pnx833x/common/setup.c @@ -6,7 +6,7 @@ * Daniel Laird <daniel.j.laird@nxp.com> * * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pnx833x/stb22x/board.c b/arch/mips/pnx833x/stb22x/board.c index 4b328ac..2ac5203 100644 --- a/arch/mips/pnx833x/stb22x/board.c +++ b/arch/mips/pnx833x/stb22x/board.c @@ -6,7 +6,7 @@ * Daniel Laird <daniel.j.laird@nxp.com> * * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. + * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/pnx8550/Makefile b/arch/mips/pnx8550/Makefile deleted file mode 100644 index 3f7e856..0000000 --- a/arch/mips/pnx8550/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_SOC_PNX8550) += common/ -obj-$(CONFIG_PNX8550_JBS) += jbs/ -obj-$(CONFIG_PNX8550_STB810) += stb810/ diff --git a/arch/mips/pnx8550/Platform b/arch/mips/pnx8550/Platform deleted file mode 100644 index 0e7fbde..0000000 --- a/arch/mips/pnx8550/Platform +++ /dev/null @@ -1,7 +0,0 @@ -platform-$(CONFIG_SOC_PNX8550) += pnx8550/ - -cflags-$(CONFIG_SOC_PNX8550) += \ - -I$(srctree)/arch/mips/include/asm/mach-pnx8550 - -load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 -load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 diff --git a/arch/mips/pnx8550/common/Makefile b/arch/mips/pnx8550/common/Makefile deleted file mode 100644 index f8ce695..0000000 --- a/arch/mips/pnx8550/common/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Per Hallsmark, per.hallsmark@mvista.com -# -# ######################################################################## -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# ####################################################################### -# -# Makefile for the PNX8550 specific kernel interface routines -# under Linux. -# - -obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/pnx8550/common/int.c b/arch/mips/pnx8550/common/int.c deleted file mode 100644 index ec684b8..0000000 --- a/arch/mips/pnx8550/common/int.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * - * Copyright (C) 2005 Embedded Alley Solutions, Inc - * Ported to 2.6. - * - * Per Hallsmark, per.hallsmark@mvista.com - * Copyright (C) 2000, 2001 MIPS Technologies, Inc. - * Copyright (C) 2001 Ralf Baechle - * - * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - */ -#include <linux/compiler.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/random.h> -#include <linux/module.h> - -#include <asm/io.h> -#include <int.h> -#include <uart.h> - -/* default prio for interrupts */ -/* first one is a no-no so therefore always prio 0 (disabled) */ -static char gic_prio[PNX8550_INT_GIC_TOTINT] = { - 0, 1, 1, 1, 1, 15, 1, 1, 1, 1, // 0 - 9 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 10 - 19 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 20 - 29 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 30 - 39 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 40 - 49 - 1, 1, 1, 1, 1, 1, 1, 1, 2, 1, // 50 - 59 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 60 - 69 - 1 // 70 -}; - -static void hw0_irqdispatch(int irq) -{ - /* find out which interrupt */ - irq = PNX8550_GIC_VECTOR_0 >> 3; - - if (irq == 0) { - printk("hw0_irqdispatch: irq 0, spurious interrupt?\n"); - return; - } - do_IRQ(PNX8550_INT_GIC_MIN + irq); -} - - -static void timer_irqdispatch(int irq) -{ - irq = (0x01c0 & read_c0_config7()) >> 6; - - if (unlikely(irq == 0)) { - printk("timer_irqdispatch: irq 0, spurious interrupt?\n"); - return; - } - - if (irq & 0x1) - do_IRQ(PNX8550_INT_TIMER1); - if (irq & 0x2) - do_IRQ(PNX8550_INT_TIMER2); - if (irq & 0x4) - do_IRQ(PNX8550_INT_TIMER3); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP2) - hw0_irqdispatch(2); - else if (pending & STATUSF_IP7) { - if (read_c0_config7() & 0x01c0) - timer_irqdispatch(7); - } else - spurious_interrupt(); -} - -static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask) -{ - unsigned long status = read_c0_status(); - - status &= ~((clr_mask & 0xFF) << 8); - status |= (set_mask & 0xFF) << 8; - - write_c0_status(status); -} - -static inline void mask_gic_int(unsigned int irq_nr) -{ - /* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */ - PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */ -} - -static inline void unmask_gic_int(unsigned int irq_nr) -{ - /* set prio mask to lower four bits and enable interrupt */ - PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr]; -} - -static inline void mask_irq(struct irq_data *d) -{ - unsigned int irq_nr = d->irq; - - if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) { - modify_cp0_intmask(1 << irq_nr, 0); - } else if ((PNX8550_INT_GIC_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_GIC_MAX)) { - mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN); - } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_TIMER_MAX)) { - modify_cp0_intmask(1 << 7, 0); - } else { - printk("mask_irq: irq %d doesn't exist!\n", irq_nr); - } -} - -static inline void unmask_irq(struct irq_data *d) -{ - unsigned int irq_nr = d->irq; - - if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) { - modify_cp0_intmask(0, 1 << irq_nr); - } else if ((PNX8550_INT_GIC_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_GIC_MAX)) { - unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN); - } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_TIMER_MAX)) { - modify_cp0_intmask(0, 1 << 7); - } else { - printk("mask_irq: irq %d doesn't exist!\n", irq_nr); - } -} - -int pnx8550_set_gic_priority(int irq, int priority) -{ - int gic_irq = irq-PNX8550_INT_GIC_MIN; - int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf; - - gic_prio[gic_irq] = priority; - PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]); - - return prev_priority; -} - -static struct irq_chip level_irq_type = { - .name = "PNX Level IRQ", - .irq_mask = mask_irq, - .irq_unmask = unmask_irq, -}; - -static struct irqaction gic_action = { - .handler = no_action, - .flags = IRQF_NO_THREAD, - .name = "GIC", -}; - -static struct irqaction timer_action = { - .handler = no_action, - .flags = IRQF_TIMER, - .name = "Timer", -}; - -void __init arch_init_irq(void) -{ - int i; - int configPR; - - for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) - irq_set_chip_and_handler(i, &level_irq_type, handle_level_irq); - - /* init of GIC/IPC interrupts */ - /* should be done before cp0 since cp0 init enables the GIC int */ - for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) { - int gic_int_line = i - PNX8550_INT_GIC_MIN; - if (gic_int_line == 0 ) - continue; // don't fiddle with int 0 - /* - * enable change of TARGET, ENABLE and ACTIVE_LOW bits - * set TARGET 0 to route through hw0 interrupt - * set ACTIVE_LOW 0 active high (correct?) - * - * We really should setup an interrupt description table - * to do this nicely. - * Note, PCI INTA is active low on the bus, but inverted - * in the GIC, so to us it's active high. - */ - PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000; - - /* mask/priority is still 0 so we will not get any - * interrupts until it is unmasked */ - - irq_set_chip_and_handler(i, &level_irq_type, handle_level_irq); - } - - /* Priority level 0 */ - PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0; - - /* Set int vector table address */ - PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0; - - irq_set_chip_and_handler(MIPS_CPU_GIC_IRQ, &level_irq_type, - handle_level_irq); - setup_irq(MIPS_CPU_GIC_IRQ, &gic_action); - - /* init of Timer interrupts */ - for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++) - irq_set_chip_and_handler(i, &level_irq_type, handle_level_irq); - - /* Stop Timer 1-3 */ - configPR = read_c0_config7(); - configPR |= 0x00000038; - write_c0_config7(configPR); - - irq_set_chip_and_handler(MIPS_CPU_TIMER_IRQ, &level_irq_type, - handle_level_irq); - setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action); -} - -EXPORT_SYMBOL(pnx8550_set_gic_priority); diff --git a/arch/mips/pnx8550/common/pci.c b/arch/mips/pnx8550/common/pci.c deleted file mode 100644 index 98e86dd..0000000 --- a/arch/mips/pnx8550/common/pci.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <pci.h> -#include <glb.h> -#include <nand.h> - -static struct resource pci_io_resource = { - .start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */ - .end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE, - .name = "pci IO space", - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .start = PNX8550_PCIMEM, - .end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1, - .name = "pci memory space", - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops pnx8550_pci_ops; - -static struct pci_controller pnx8550_controller = { - .pci_ops = &pnx8550_pci_ops, - .io_map_base = PNX8550_PORT_BASE, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -static inline unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -static int __init pnx8550_pci_setup(void) -{ - int pci_mem_code; - int mem_size = get_system_mem_size() >> 20; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* Calc the PCI mem size code */ - if (mem_size >= 128) - pci_mem_code = SIZE_128M; - else if (mem_size >= 64) - pci_mem_code = SIZE_64M; - else if (mem_size >= 32) - pci_mem_code = SIZE_32M; - else - pci_mem_code = SIZE_16M; - - /* Set PCI_XIO registers */ - outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO); - outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI); - outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO); - outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI); - - /* Send memory transaction via PCI_BASE2 */ - outl(0x00000001, PCI_BASE | PCI_IO); - - /* Unlock the setup register */ - outl(0xca, PCI_BASE | PCI_UNLOCKREG); - - /* - * BAR0 of PNX8550 (pci base 10) must be zero in order for ide - * to work, and in order for bus_to_baddr to work without any - * hacks. - */ - outl(0x00000000, PCI_BASE | PCI_BASE10); - - /* - *These two bars are set by default or the boot code. - * However, it's safer to set them here so we're not boot - * code dependent. - */ - outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */ - outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */ - - outl(PCI_EN_TA | - PCI_EN_PCI2MMI | - PCI_EN_XIO | - PCI_SETUP_BASE18_SIZE(SIZE_32M) | - PCI_SETUP_BASE18_EN | - PCI_SETUP_BASE14_EN | - PCI_SETUP_BASE10_PREF | - PCI_SETUP_BASE10_SIZE(pci_mem_code) | - PCI_SETUP_CFGMANAGE_EN | - PCI_SETUP_PCIARB_EN, - PCI_BASE | - PCI_SETUP); /* PCI_SETUP */ - outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */ - - register_pci_controller(&pnx8550_controller); - - return 0; -} - -arch_initcall(pnx8550_pci_setup); diff --git a/arch/mips/pnx8550/common/platform.c b/arch/mips/pnx8550/common/platform.c deleted file mode 100644 index 0a8faea..0000000 --- a/arch/mips/pnx8550/common/platform.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Platform device support for NXP PNX8550 SoCs - * - * Copyright 2005, Embedded Alley Solutions, Inc - * - * Based on arch/mips/au1000/common/platform.c - * Platform device support for Au1x00 SoCs. - * - * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/resource.h> -#include <linux/serial.h> -#include <linux/serial_pnx8xxx.h> -#include <linux/platform_device.h> -#include <linux/usb/ohci_pdriver.h> - -#include <int.h> -#include <usb.h> -#include <uart.h> - -static struct resource pnx8550_usb_ohci_resources[] = { - [0] = { - .start = PNX8550_USB_OHCI_OP_BASE, - .end = PNX8550_USB_OHCI_OP_BASE + - PNX8550_USB_OHCI_OP_LEN, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8550_INT_USB, - .end = PNX8550_INT_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pnx8550_uart_resources[] = { - [0] = { - .start = PNX8550_UART_PORT0, - .end = PNX8550_UART_PORT0 + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8550_UART_INT(0), - .end = PNX8550_UART_INT(0), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = PNX8550_UART_PORT1, - .end = PNX8550_UART_PORT1 + 0xfff, - .flags = IORESOURCE_MEM, - }, - [3] = { - .start = PNX8550_UART_INT(1), - .end = PNX8550_UART_INT(1), - .flags = IORESOURCE_IRQ, - }, -}; - -struct pnx8xxx_port pnx8xxx_ports[] = { - [0] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX8550_UART_PORT0, - .mapbase = PNX8550_UART_PORT0, - .irq = PNX8550_UART_INT(0), - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - [1] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX8550_UART_PORT1, - .mapbase = PNX8550_UART_PORT1, - .irq = PNX8550_UART_INT(1), - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, -}; - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = DMA_BIT_MASK(32); - -static u64 uart_dmamask = DMA_BIT_MASK(32); - -static int pnx8550_usb_ohci_power_on(struct platform_device *pdev) -{ - /* - * Set register CLK48CTL to enable and 48MHz - */ - outl(0x00000003, PCI_BASE | 0x0004770c); - - /* - * Set register CLK12CTL to enable and 48MHz - */ - outl(0x00000003, PCI_BASE | 0x00047710); - - udelay(100); - - return 0; -} - -static void pnx8550_usb_ohci_power_off(struct platform_device *pdev) -{ - udelay(10); -} - -static struct usb_ohci_pdata pnx8550_usb_ohci_pdata = { - .power_on = pnx8550_usb_ohci_power_on, - .power_off = pnx8550_usb_ohci_power_off, -}; - -static struct platform_device pnx8550_usb_ohci_device = { - .name = "ohci-platform", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &pnx8550_usb_ohci_pdata, - }, - .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources), - .resource = pnx8550_usb_ohci_resources, -}; - -static struct platform_device pnx8550_uart_device = { - .name = "pnx8xxx-uart", - .id = -1, - .dev = { - .dma_mask = &uart_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = pnx8xxx_ports, - }, - .num_resources = ARRAY_SIZE(pnx8550_uart_resources), - .resource = pnx8550_uart_resources, -}; - -static struct platform_device *pnx8550_platform_devices[] __initdata = { - &pnx8550_usb_ohci_device, - &pnx8550_uart_device, -}; - -static int __init pnx8550_platform_init(void) -{ - return platform_add_devices(pnx8550_platform_devices, - ARRAY_SIZE(pnx8550_platform_devices)); -} - -arch_initcall(pnx8550_platform_init); diff --git a/arch/mips/pnx8550/common/proc.c b/arch/mips/pnx8550/common/proc.c deleted file mode 100644 index 3bba5ec..0000000 --- a/arch/mips/pnx8550/common/proc.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/init.h> -#include <linux/proc_fs.h> -#include <linux/irq.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/random.h> - -#include <asm/io.h> -#include <int.h> -#include <uart.h> - - -static int pnx8550_timers_read(char* page, char** start, off_t offset, int count, int* eof, void* data) -{ - int len = 0; - int configPR = read_c0_config7(); - - if (offset==0) { - len += sprintf(&page[len], "Timer: count, compare, tc, status\n"); - len += sprintf(&page[len], " 1: %11i, %8i, %1i, %s\n", - read_c0_count(), read_c0_compare(), - (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on"); - len += sprintf(&page[len], " 2: %11i, %8i, %1i, %s\n", - read_c0_count2(), read_c0_compare2(), - (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on"); - len += sprintf(&page[len], " 3: %11i, %8i, %1i, %s\n", - read_c0_count3(), read_c0_compare3(), - (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on"); - } - - return len; -} - -static int pnx8550_registers_read(char* page, char** start, off_t offset, int count, int* eof, void* data) -{ - int len = 0; - - if (offset==0) { - len += sprintf(&page[len], "config1: %#10.8x\n", read_c0_config1()); - len += sprintf(&page[len], "config2: %#10.8x\n", read_c0_config2()); - len += sprintf(&page[len], "config3: %#10.8x\n", read_c0_config3()); - len += sprintf(&page[len], "configPR: %#10.8x\n", read_c0_config7()); - len += sprintf(&page[len], "status: %#10.8x\n", read_c0_status()); - len += sprintf(&page[len], "cause: %#10.8x\n", read_c0_cause()); - len += sprintf(&page[len], "count: %#10.8x\n", read_c0_count()); - len += sprintf(&page[len], "count_2: %#10.8x\n", read_c0_count2()); - len += sprintf(&page[len], "count_3: %#10.8x\n", read_c0_count3()); - len += sprintf(&page[len], "compare: %#10.8x\n", read_c0_compare()); - len += sprintf(&page[len], "compare_2: %#10.8x\n", read_c0_compare2()); - len += sprintf(&page[len], "compare_3: %#10.8x\n", read_c0_compare3()); - } - - return len; -} - -static struct proc_dir_entry* pnx8550_dir; -static struct proc_dir_entry* pnx8550_timers; -static struct proc_dir_entry* pnx8550_registers; - -static int pnx8550_proc_init( void ) -{ - - // Create /proc/pnx8550 - pnx8550_dir = proc_mkdir("pnx8550", NULL); - if (!pnx8550_dir) { - printk(KERN_ERR "Can't create pnx8550 proc dir\n"); - return -1; - } - - // Create /proc/pnx8550/timers - pnx8550_timers = create_proc_read_entry( - "timers", - 0, - pnx8550_dir, - pnx8550_timers_read, - NULL); - - if (!pnx8550_timers) - printk(KERN_ERR "Can't create pnx8550 timers proc file\n"); - - // Create /proc/pnx8550/registers - pnx8550_registers = create_proc_read_entry( - "registers", - 0, - pnx8550_dir, - pnx8550_registers_read, - NULL); - - if (!pnx8550_registers) - printk(KERN_ERR "Can't create pnx8550 registers proc file\n"); - - return 0; -} - -__initcall(pnx8550_proc_init); diff --git a/arch/mips/pnx8550/common/prom.c b/arch/mips/pnx8550/common/prom.c deleted file mode 100644 index 49639e8..0000000 --- a/arch/mips/pnx8550/common/prom.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * - * Per Hallsmark, per.hallsmark@mvista.com - * - * Based on jmr3927/common/prom.c - * - * 2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/serial_pnx8xxx.h> - -#include <asm/bootinfo.h> -#include <uart.h> - -/* #define DEBUG_CMDLINE */ - -extern int prom_argc; -extern char **prom_argv, **prom_envp; - -typedef struct -{ - char *name; -/* char *val; */ -}t_env_var; - - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -void __init prom_init_cmdline(void) -{ - int i; - - arcs_cmdline[0] = '\0'; - for (i = 0; i < prom_argc; i++) { - strcat(arcs_cmdline, prom_argv[i]); - strcat(arcs_cmdline, " "); - } -} - -char *prom_getenv(char *envname) -{ - /* - * Return a pointer to the given environment variable. - * Environment variables are stored in the form of "memsize=64". - */ - - t_env_var *env = (t_env_var *)prom_envp; - int i; - - i = strlen(envname); - - while(env->name) { - if(strncmp(envname, env->name, i) == 0) { - return(env->name + strlen(envname) + 1); - } - env++; - } - return(NULL); -} - -inline unsigned char str2hexnum(unsigned char c) -{ - if(c >= '0' && c <= '9') - return c - '0'; - if(c >= 'a' && c <= 'f') - return c - 'a' + 10; - if(c >= 'A' && c <= 'F') - return c - 'A' + 10; - return 0; /* foo */ -} - -inline void str2eaddr(unsigned char *ea, unsigned char *str) -{ - int i; - - for(i = 0; i < 6; i++) { - unsigned char num; - - if((*str == '.') || (*str == ':')) - str++; - num = str2hexnum(*str++) << 4; - num |= (str2hexnum(*str++)); - ea[i] = num; - } -} - -int get_ethernet_addr(char *ethernet_addr) -{ - char *ethaddr_str; - - ethaddr_str = prom_getenv("ethaddr"); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - return 0; -} - -void __init prom_free_prom_memory(void) -{ -} - -extern int pnx8550_console_port; - -/* used by early printk */ -void prom_putchar(char c) -{ - if (pnx8550_console_port != -1) { - /* Wait until FIFO not full */ - while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & PNX8XXX_UART_FIFO_TXFIFO) >> 16) >= 16) - ; - /* Send one char */ - ip3106_fifo(UART_BASE, pnx8550_console_port) = c; - } -} - -EXPORT_SYMBOL(get_ethernet_addr); -EXPORT_SYMBOL(str2eaddr); diff --git a/arch/mips/pnx8550/common/reset.c b/arch/mips/pnx8550/common/reset.c deleted file mode 100644 index e7a12ff..0000000 --- a/arch/mips/pnx8550/common/reset.c +++ /dev/null @@ -1,40 +0,0 @@ -/*. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Reset the PNX8550 board. - * - */ -#include <linux/kernel.h> - -#include <asm/processor.h> -#include <asm/reboot.h> -#include <glb.h> - -void pnx8550_machine_restart(char *command) -{ - PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST; -} - -void pnx8550_machine_halt(void) -{ - while (1) { - if (cpu_wait) - cpu_wait(); - } -} diff --git a/arch/mips/pnx8550/common/setup.c b/arch/mips/pnx8550/common/setup.c deleted file mode 100644 index fccd6b0..0000000 --- a/arch/mips/pnx8550/common/setup.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * - * 2.6 port, Embedded Alley Solutions, Inc - * - * Based on Per Hallsmark, per.hallsmark@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/irq.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/serial_pnx8xxx.h> -#include <linux/pm.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/pgtable.h> -#include <asm/time.h> - -#include <glb.h> -#include <int.h> -#include <pci.h> -#include <uart.h> -#include <nand.h> - -extern void __init board_setup(void); -extern void pnx8550_machine_restart(char *); -extern void pnx8550_machine_halt(void); -extern struct resource ioport_resource; -extern struct resource iomem_resource; -extern char *prom_getcmdline(void); - -struct resource standard_io_resources[] = { - { - .start = 0x00, - .end = 0x1f, - .name = "dma1", - .flags = IORESOURCE_BUSY - }, { - .start = 0x40, - .end = 0x5f, - .name = "timer", - .flags = IORESOURCE_BUSY - }, { - .start = 0x80, - .end = 0x8f, - .name = "dma page reg", - .flags = IORESOURCE_BUSY - }, { - .start = 0xc0, - .end = 0xdf, - .name = "dma2", - .flags = IORESOURCE_BUSY - }, -}; - -#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources) - -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -int pnx8550_console_port = -1; - -void __init plat_mem_setup(void) -{ - int i; - char* argptr; - - board_setup(); /* board specific setup */ - - _machine_restart = pnx8550_machine_restart; - _machine_halt = pnx8550_machine_halt; - pm_power_off = pnx8550_machine_halt; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* IO/MEM resources. */ - set_io_port_base(PNX8550_PORT_BASE); - ioport_resource.start = 0; - ioport_resource.end = ~0; - iomem_resource.start = 0; - iomem_resource.end = ~0; - - /* Request I/O space for devices on this board */ - for (i = 0; i < STANDARD_IO_RESOURCES; i++) - request_resource(&ioport_resource, standard_io_resources + i); - - /* Place the Mode Control bit for GPIO pin 16 in primary function */ - /* Pin 16 is used by UART1, UA1_TX */ - outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) | - (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT), - PNX8550_GPIO_MC1); - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=ttyS")) != NULL) { - argptr += strlen("console=ttyS"); - pnx8550_console_port = *argptr == '0' ? 0 : 1; - - /* We must initialize the UART (console) before early printk */ - /* Set LCR to 8-bit and BAUD to 38400 (no 5) */ - ip3106_lcr(UART_BASE, pnx8550_console_port) = - PNX8XXX_UART_LCR_8BIT; - ip3106_baud(UART_BASE, pnx8550_console_port) = 5; - } -} diff --git a/arch/mips/pnx8550/common/time.c b/arch/mips/pnx8550/common/time.c deleted file mode 100644 index 831d6b3..0000000 --- a/arch/mips/pnx8550/common/time.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright 2001, 2002, 2003 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * Common time service routines for MIPS machines. See - * Documents/MIPS/README.txt. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/param.h> -#include <linux/time.h> -#include <linux/timer.h> -#include <linux/smp.h> -#include <linux/kernel_stat.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> - -#include <asm/bootinfo.h> -#include <asm/cpu.h> -#include <asm/time.h> -#include <asm/hardirq.h> -#include <asm/div64.h> -#include <asm/debug.h> - -#include <int.h> -#include <cm.h> - -static unsigned long cpj; - -static cycle_t hpt_read(struct clocksource *cs) -{ - return read_c0_count2(); -} - -static struct clocksource pnx_clocksource = { - .name = "pnx8xxx", - .rating = 200, - .read = hpt_read, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *c = dev_id; - - /* clear MATCH, signal the event */ - c->event_handler(c); - - return IRQ_HANDLED; -} - -static struct irqaction pnx8xxx_timer_irq = { - .handler = pnx8xxx_timer_interrupt, - .flags = IRQF_PERCPU | IRQF_TIMER, - .name = "pnx8xxx_timer", -}; - -static irqreturn_t monotonic_interrupt(int irq, void *dev_id) -{ - /* Timer 2 clear interrupt */ - write_c0_compare2(-1); - return IRQ_HANDLED; -} - -static struct irqaction monotonic_irqaction = { - .handler = monotonic_interrupt, - .flags = IRQF_TIMER, - .name = "Monotonic timer", -}; - -static int pnx8xxx_set_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - write_c0_compare(delta); - return 0; -} - -static struct clock_event_device pnx8xxx_clockevent = { - .name = "pnx8xxx_clockevent", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = pnx8xxx_set_next_event, -}; - -static inline void timer_ack(void) -{ - write_c0_compare(cpj); -} - -__init void plat_time_init(void) -{ - unsigned int configPR; - unsigned int n; - unsigned int m; - unsigned int p; - unsigned int pow2p; - - pnx8xxx_clockevent.cpumask = cpu_none_mask; - clockevents_register_device(&pnx8xxx_clockevent); - clocksource_register(&pnx_clocksource); - - /* Timer 1 start */ - configPR = read_c0_config7(); - configPR &= ~0x00000008; - write_c0_config7(configPR); - - /* Timer 2 start */ - configPR = read_c0_config7(); - configPR &= ~0x00000010; - write_c0_config7(configPR); - - /* Timer 3 stop */ - configPR = read_c0_config7(); - configPR |= 0x00000020; - write_c0_config7(configPR); - - - /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */ - /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */ - - n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16; - m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8; - p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2; - pow2p = (1 << p); - - db_assert(m != 0 && pow2p != 0); - - /* - * Compute the frequency as in the PNX8550 User Manual 1.0, p.186 - * (a.k.a. 8-10). Divide by HZ for a timer offset that results in - * HZ timer interrupts per second. - */ - mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p)); - cpj = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ); - write_c0_count(0); - timer_ack(); - - /* Setup Timer 2 */ - write_c0_count2(0); - write_c0_compare2(0xffffffff); - - setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq); - setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction); -} diff --git a/arch/mips/pnx8550/jbs/Makefile b/arch/mips/pnx8550/jbs/Makefile deleted file mode 100644 index c4dc3d5..0000000 --- a/arch/mips/pnx8550/jbs/Makefile +++ /dev/null @@ -1,4 +0,0 @@ - -# Makefile for the NXP JBS Board. - -obj-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/pnx8550/jbs/board_setup.c b/arch/mips/pnx8550/jbs/board_setup.c deleted file mode 100644 index 57dd903..0000000 --- a/arch/mips/pnx8550/jbs/board_setup.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * JBS Specific board startup routines. - * - * Copyright 2005, Embedded Alley Solutions, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/mc146818rtc.h> -#include <linux/delay.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/pgtable.h> - -#include <glb.h> - -/* CP0 hazard avoidance. */ -#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \ - "nop; nop; nop; nop; nop; nop;\n\t" \ - ".set reorder\n\t") - -void __init board_setup(void) -{ - unsigned long configpr; - - configpr = read_c0_config7(); - configpr |= (1<<19); /* enable tlb */ - write_c0_config7(configpr); - BARRIER; -} diff --git a/arch/mips/pnx8550/jbs/init.c b/arch/mips/pnx8550/jbs/init.c deleted file mode 100644 index d59b4a4..0000000 --- a/arch/mips/pnx8550/jbs/init.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * - * Copyright 2005 Embedded Alley Solutions, Inc - * source@embeddedalley.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <linux/string.h> -#include <linux/kernel.h> - -int prom_argc; -char **prom_argv, **prom_envp; -extern void __init prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ - return "NXP PNX8550/JBS"; -} - -void __init prom_init(void) -{ - unsigned long memsize; - - //memsize = 0x02800000; /* Trimedia uses memory above */ - memsize = 0x08000000; /* Trimedia uses memory above */ - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/pnx8550/jbs/irqmap.c b/arch/mips/pnx8550/jbs/irqmap.c deleted file mode 100644 index 7fc89842..0000000 --- a/arch/mips/pnx8550/jbs/irqmap.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * NXP JBS board irqmap. - * - * Copyright 2005 Embedded Alley Solutions, Inc - * source@embeddealley.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <int.h> - -char pnx8550_irq_tab[][5] __initdata = { - [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, -}; diff --git a/arch/mips/pnx8550/stb810/Makefile b/arch/mips/pnx8550/stb810/Makefile deleted file mode 100644 index cb4ff02..0000000 --- a/arch/mips/pnx8550/stb810/Makefile +++ /dev/null @@ -1,4 +0,0 @@ - -# Makefile for the NXP STB810 Board. - -obj-y := prom_init.o board_setup.o irqmap.o diff --git a/arch/mips/pnx8550/stb810/board_setup.c b/arch/mips/pnx8550/stb810/board_setup.c deleted file mode 100644 index af2a55e..0000000 --- a/arch/mips/pnx8550/stb810/board_setup.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * STB810 specific board startup routines. - * - * Based on the arch/mips/nxp/pnx8550/jbs/board_setup.c - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/mc146818rtc.h> -#include <linux/delay.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/pgtable.h> - -#include <glb.h> - -void __init board_setup(void) -{ - unsigned long configpr; - - configpr = read_c0_config7(); - configpr |= (1<<19); /* enable tlb */ - write_c0_config7(configpr); -} diff --git a/arch/mips/pnx8550/stb810/irqmap.c b/arch/mips/pnx8550/stb810/irqmap.c deleted file mode 100644 index 8c03496..0000000 --- a/arch/mips/pnx8550/stb810/irqmap.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * NXP STB810 board irqmap. - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <int.h> - -char pnx8550_irq_tab[][5] __initdata = { - [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [10] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, -}; diff --git a/arch/mips/pnx8550/stb810/prom_init.c b/arch/mips/pnx8550/stb810/prom_init.c deleted file mode 100644 index ca7f4ad..0000000 --- a/arch/mips/pnx8550/stb810/prom_init.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * STB810 specific prom routines - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <linux/string.h> -#include <linux/kernel.h> - -int prom_argc; -char **prom_argv, **prom_envp; -extern void __init prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ - return "NXP PNX8950/STB810"; -} - -void __init prom_init(void) -{ - unsigned long memsize; - - prom_argc = (int) fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; - - prom_init_cmdline(); - - memsize = 0x08000000; /* Trimedia uses memory above */ - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/power/cpu.c b/arch/mips/power/cpu.c index 26a6ef1..521e596 100644 --- a/arch/mips/power/cpu.c +++ b/arch/mips/power/cpu.c @@ -5,7 +5,7 @@ * * Copyright (C) 2009 Lemote Inc. * Author: Hu Hongbing <huhb@lemote.com> - * Wu Zhangjin <wuzhangjin@gmail.com> + * Wu Zhangjin <wuzhangjin@gmail.com> */ #include <asm/suspend.h> #include <asm/fpu.h> diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S index 61e2558..7e0277a 100644 --- a/arch/mips/power/hibernate.S +++ b/arch/mips/power/hibernate.S @@ -5,7 +5,7 @@ * * Copyright (C) 2009 Lemote Inc. * Author: Hu Hongbing <huhb@lemote.com> - * Wu Zhangjin <wuzhangjin@gmail.com> + * Wu Zhangjin <wuzhangjin@gmail.com> */ #include <asm/asm-offsets.h> #include <asm/regdef.h> diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c index 7773f3d..2f539b4 100644 --- a/arch/mips/powertv/asic/asic-calliope.c +++ b/arch/mips/powertv/asic/asic-calliope.c @@ -17,10 +17,10 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> * - * Description: Defines the platform resources for the SA settop. + * Description: Defines the platform resources for the SA settop. */ #include <linux/init.h> @@ -90,12 +90,12 @@ const struct register_map calliope_register_map __initconst = { .usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)}, .usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)}, - .pcie_regs = {.phys = 0x000000}, /* -doesn't exist- */ + .pcie_regs = {.phys = 0x000000}, /* -doesn't exist- */ .tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)}, .tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)}, .gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)}, .gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)}, .gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)}, .watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)}, - .front_panel = {.phys = 0x000000}, /* -not used- */ + .front_panel = {.phys = 0x000000}, /* -not used- */ }; diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c index da076db..7f8f342 100644 --- a/arch/mips/powertv/asic/asic-cronus.c +++ b/arch/mips/powertv/asic/asic-cronus.c @@ -17,10 +17,10 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> * - * Description: Defines the platform resources for the SA settop. + * Description: Defines the platform resources for the SA settop. */ #include <linux/init.h> diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c index 47683b3..1265b49 100644 --- a/arch/mips/powertv/asic/asic-gaia.c +++ b/arch/mips/powertv/asic/asic-gaia.c @@ -17,7 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: David VomLehn + * Author: David VomLehn */ #include <linux/init.h> diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c index 6ff4b10f..14e7de1 100644 --- a/arch/mips/powertv/asic/asic-zeus.c +++ b/arch/mips/powertv/asic/asic-zeus.c @@ -17,10 +17,10 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> * - * Description: Defines the platform resources for the SA settop. + * Description: Defines the platform resources for the SA settop. */ #include <linux/init.h> diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c index bce1872..d38b095 100644 --- a/arch/mips/powertv/asic/asic_devices.c +++ b/arch/mips/powertv/asic/asic_devices.c @@ -1,6 +1,6 @@ /* * - * Description: Defines the platform resources for Gaia-based settops. + * Description: Defines the platform resources for Gaia-based settops. * * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. * @@ -90,12 +90,12 @@ struct resource asic_resource = { /* * Allow override of bootloader-specified model - * Returns zero on success, a negative errno value on failure. This parameter + * Returns zero on success, a negative errno value on failure. This parameter * allows overriding of the bootloader-specified model. */ static char __initdata cmdline[COMMAND_LINE_SIZE]; -#define FORCEFAMILY_PARAM "forcefamily" +#define FORCEFAMILY_PARAM "forcefamily" /* * check_forcefamily - check for, and parse, forcefamily command line parameter @@ -486,7 +486,7 @@ static void __init pmem_setup_resource(void) resource->start = phys_to_dma(pmemaddr - 0x80000000); resource->end = resource->start + pmemlen - 1; - pr_info("persistent memory: start=0x%x end=0x%x\n", + pr_info("persistent memory: start=0x%x end=0x%x\n", resource->start, resource->end); } } diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c index 99d82e1..f44cd92 100644 --- a/arch/mips/powertv/asic/asic_int.c +++ b/arch/mips/powertv/asic/asic_int.c @@ -2,7 +2,7 @@ * Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. * Copyright (C) 2001 Ralf Baechle - * Portions copyright (C) 2009 Cisco Systems, Inc. + * Portions copyright (C) 2009 Cisco Systems, Inc. * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -64,7 +64,7 @@ static void asic_irqdispatch(void) irq = get_int(); if (irq < 0) - return; /* interrupt has already been cleared */ + return; /* interrupt has already been cleared */ do_IRQ(irq); } diff --git a/arch/mips/powertv/asic/irq_asic.c b/arch/mips/powertv/asic/irq_asic.c index fa9ae95..9344902 100644 --- a/arch/mips/powertv/asic/irq_asic.c +++ b/arch/mips/powertv/asic/irq_asic.c @@ -5,8 +5,8 @@ * Modified from arch/mips/kernel/irq-rm7000.c: * Copyright (C) 2003 Ralf Baechle * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/powertv/asic/prealloc-calliope.c b/arch/mips/powertv/asic/prealloc-calliope.c index 3fc5d466..98dc516 100644 --- a/arch/mips/powertv/asic/prealloc-calliope.c +++ b/arch/mips/powertv/asic/prealloc-calliope.c @@ -17,8 +17,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> */ #include <linux/init.h> @@ -153,7 +153,7 @@ struct resource non_dvr_calliope_resources[] __initdata = * End of Resource marker */ { - .flags = 0, + .flags = 0, }, }; @@ -260,7 +260,7 @@ struct resource non_dvr_vze_calliope_resources[] __initdata = * End of Resource marker */ { - .flags = 0, + .flags = 0, }, }; @@ -380,6 +380,6 @@ struct resource non_dvr_vzf_calliope_resources[] __initdata = * End of Resource marker */ { - .flags = 0, + .flags = 0, }, }; diff --git a/arch/mips/powertv/asic/prealloc-cronus.c b/arch/mips/powertv/asic/prealloc-cronus.c index c532b50..7c6ce75 100644 --- a/arch/mips/powertv/asic/prealloc-cronus.c +++ b/arch/mips/powertv/asic/prealloc-cronus.c @@ -17,8 +17,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> */ #include <linux/init.h> @@ -78,7 +78,7 @@ struct resource dvr_cronus_resources[] __initdata = * * This memory area is used for allocating buffers for Video decoding * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated + * by the STAVMEM driver of the STAPI. They could be Decimated * Picture Buffers, Intermediate Buffers, as deemed necessary for * video decoding purposes, for any video decoders on Zeus. */ @@ -185,7 +185,7 @@ struct resource dvr_cronus_resources[] __initdata = * End of Resource marker */ { - .flags = 0, + .flags = 0, }, }; @@ -241,7 +241,7 @@ struct resource non_dvr_cronus_resources[] __initdata = * * This memory area is used for allocating buffers for Video decoding * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated + * by the STAVMEM driver of the STAPI. They could be Decimated * Picture Buffers, Intermediate Buffers, as deemed necessary for * video decoding purposes, for any video decoders on Zeus. */ @@ -335,6 +335,6 @@ struct resource non_dvr_cronus_resources[] __initdata = * End of Resource marker */ { - .flags = 0, + .flags = 0, }, }; diff --git a/arch/mips/powertv/asic/prealloc-cronuslite.c b/arch/mips/powertv/asic/prealloc-cronuslite.c index b5537e4..a7937ba 100644 --- a/arch/mips/powertv/asic/prealloc-cronuslite.c +++ b/arch/mips/powertv/asic/prealloc-cronuslite.c @@ -17,8 +17,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> */ #include <linux/init.h> @@ -65,7 +65,7 @@ struct resource non_dvr_cronuslite_resources[] __initdata = * * This memory area is used for allocating buffers for Video decoding * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated + * by the STAVMEM driver of the STAPI. They could be Decimated * Picture Buffers, Intermediate Buffers, as deemed necessary for * video decoding purposes, for any video decoders on Zeus. */ @@ -169,6 +169,6 @@ struct resource non_dvr_cronuslite_resources[] __initdata = * End of Resource marker */ { - .flags = 0, + .flags = 0, }, }; diff --git a/arch/mips/powertv/asic/prealloc-gaia.c b/arch/mips/powertv/asic/prealloc-gaia.c index 8ac8c7a..2303bbf 100644 --- a/arch/mips/powertv/asic/prealloc-gaia.c +++ b/arch/mips/powertv/asic/prealloc-gaia.c @@ -17,7 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: David VomLehn + * Author: David VomLehn */ #include <linux/init.h> @@ -33,22 +33,22 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "ST231aImage", /* Delta-Mu 1 image and ram */ - .start = 0x24000000, - .end = 0x241FFFFF, /* 2MiB */ - .flags = IORESOURCE_MEM, + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x241FFFFF, /* 2MiB */ + .flags = IORESOURCE_MEM, }, { - .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ - .start = 0x24200000, - .end = 0x24201FFF, - .flags = IORESOURCE_MEM, + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24201FFF, + .flags = IORESOURCE_MEM, }, { - .name = "MediaMemory1", - .start = 0x24202000, - .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ - .flags = IORESOURCE_MEM, + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, }, /* * @@ -56,22 +56,22 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "ST231bImage", /* Delta-Mu 2 image and ram */ - .start = 0x60000000, - .end = 0x601FFFFF, /* 2MiB */ - .flags = IORESOURCE_IO, + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, }, { - .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ - .start = 0x60200000, - .end = 0x60201FFF, - .flags = IORESOURCE_IO, + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, }, { - .name = "MediaMemory2", - .start = 0x60202000, - .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ - .flags = IORESOURCE_IO, + .name = "MediaMemory2", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, }, /* * @@ -87,28 +87,28 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "DSP_Image_Buff", - .start = 0x00000000, - .end = 0x000FFFFF, - .flags = IORESOURCE_MEM, + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, }, { - .name = "ADSC_CPU_PCM_Buff", - .start = 0x00000000, - .end = 0x00009FFF, - .flags = IORESOURCE_MEM, + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, }, { - .name = "ADSC_AUX_Buff", - .start = 0x00000000, - .end = 0x00003FFF, - .flags = IORESOURCE_MEM, + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, }, { - .name = "ADSC_Main_Buff", - .start = 0x00000000, - .end = 0x00003FFF, - .flags = IORESOURCE_MEM, + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, }, /* * @@ -119,16 +119,16 @@ struct resource dvr_gaia_resources[] __initdata = { * Arbitrary Based Buffers: * This memory area is used for allocating buffers for Video decoding * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated + * by the STAVMEM driver of the STAPI. They could be Decimated * Picture Buffers, Intermediate Buffers, as deemed necessary for * video decoding purposes, for any video decoders on Zeus. * */ { - .name = "AVMEMPartition0", - .start = 0x63580000, - .end = 0x64180000 - 1, /* 12 MB total */ - .flags = IORESOURCE_IO, + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x64180000 - 1, /* 12 MB total */ + .flags = IORESOURCE_IO, }, /* * @@ -141,10 +141,10 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "Docsis", - .start = 0x62000000, - .end = 0x62700000 - 1, /* 7 MB total */ - .flags = IORESOURCE_IO, + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, }, /* * @@ -157,10 +157,10 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "GraphicsHeap", - .start = 0x62700000, - .end = 0x63500000 - 1, /* 14 MB total */ - .flags = IORESOURCE_IO, + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, }, /* * @@ -173,10 +173,10 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "MulticomSHM", - .start = 0x26000000, - .end = 0x26020000 - 1, - .flags = IORESOURCE_MEM, + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, }, /* * @@ -189,10 +189,10 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "BMM_Buffer", - .start = 0x00000000, - .end = 0x00280000 - 1, - .flags = IORESOURCE_MEM, + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x00280000 - 1, + .flags = IORESOURCE_MEM, }, /* * @@ -205,10 +205,10 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "DisplayBins0", - .start = 0x00000000, - .end = 0x00000FFF, /* 4 KB total */ - .flags = IORESOURCE_MEM, + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, }, /* * @@ -221,10 +221,10 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "DisplayBins1", - .start = 0x64AD4000, - .end = 0x64AD5000 - 1, /* 4 KB total */ - .flags = IORESOURCE_IO, + .name = "DisplayBins1", + .start = 0x64AD4000, + .end = 0x64AD5000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, }, /* * @@ -237,11 +237,11 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "ITFS", - .start = 0x64180000, + .name = "ITFS", + .start = 0x64180000, /* 815,104 bytes each for 2 ITFS partitions. */ - .end = 0x6430DFFF, - .flags = IORESOURCE_IO, + .end = 0x6430DFFF, + .flags = IORESOURCE_IO, }, /* * @@ -254,17 +254,17 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "AvfsDmaMem", - .start = 0x6430E000, + .name = "AvfsDmaMem", + .start = 0x6430E000, /* (945K * 8) = (128K *3) 5 playbacks / 3 server */ - .end = 0x64AD0000 - 1, - .flags = IORESOURCE_IO, + .end = 0x64AD0000 - 1, + .flags = IORESOURCE_IO, }, { - .name = "AvfsFileSys", - .start = 0x64AD0000, - .end = 0x64AD1000 - 1, /* 4K */ - .flags = IORESOURCE_IO, + .name = "AvfsFileSys", + .start = 0x64AD0000, + .end = 0x64AD1000 - 1, /* 4K */ + .flags = IORESOURCE_IO, }, /* * @@ -277,10 +277,10 @@ struct resource dvr_gaia_resources[] __initdata = { * */ { - .name = "SmartCardInfo", - .start = 0x64AD1000, - .end = 0x64AD3800 - 1, - .flags = IORESOURCE_IO, + .name = "SmartCardInfo", + .start = 0x64AD1000, + .end = 0x64AD3800 - 1, + .flags = IORESOURCE_IO, }, /* * @@ -290,22 +290,22 @@ struct resource dvr_gaia_resources[] __initdata = { * NP IPC - must be video bank 2 */ { - .name = "NP_Reset_Vector", - .start = 0x27c00000, - .end = 0x27c01000 - 1, - .flags = IORESOURCE_MEM, + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, }, { - .name = "NP_Image", - .start = 0x27020000, - .end = 0x27060000 - 1, - .flags = IORESOURCE_MEM, + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, }, { - .name = "NP_IPC", - .start = 0x63500000, - .end = 0x63580000 - 1, - .flags = IORESOURCE_IO, + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, }, /* * Add other resources here @@ -323,22 +323,22 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "ST231aImage", /* Delta-Mu 1 image and ram */ - .start = 0x24000000, - .end = 0x241FFFFF, /* 2MiB */ - .flags = IORESOURCE_MEM, + .name = "ST231aImage", /* Delta-Mu 1 image and ram */ + .start = 0x24000000, + .end = 0x241FFFFF, /* 2MiB */ + .flags = IORESOURCE_MEM, }, { - .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ - .start = 0x24200000, - .end = 0x24201FFF, - .flags = IORESOURCE_MEM, + .name = "ST231aMonitor", /* 8KiB block ST231a monitor */ + .start = 0x24200000, + .end = 0x24201FFF, + .flags = IORESOURCE_MEM, }, { - .name = "MediaMemory1", - .start = 0x24202000, - .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ - .flags = IORESOURCE_MEM, + .name = "MediaMemory1", + .start = 0x24202000, + .end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_MEM, }, /* * @@ -346,22 +346,22 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "ST231bImage", /* Delta-Mu 2 image and ram */ - .start = 0x60000000, - .end = 0x601FFFFF, /* 2MiB */ - .flags = IORESOURCE_IO, + .name = "ST231bImage", /* Delta-Mu 2 image and ram */ + .start = 0x60000000, + .end = 0x601FFFFF, /* 2MiB */ + .flags = IORESOURCE_IO, }, { - .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ - .start = 0x60200000, - .end = 0x60201FFF, - .flags = IORESOURCE_IO, + .name = "ST231bMonitor", /* 8KiB block ST231b monitor */ + .start = 0x60200000, + .end = 0x60201FFF, + .flags = IORESOURCE_IO, }, { - .name = "MediaMemory2", - .start = 0x60202000, - .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ - .flags = IORESOURCE_IO, + .name = "MediaMemory2", + .start = 0x60202000, + .end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */ + .flags = IORESOURCE_IO, }, /* * @@ -377,28 +377,28 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "DSP_Image_Buff", - .start = 0x00000000, - .end = 0x000FFFFF, - .flags = IORESOURCE_MEM, + .name = "DSP_Image_Buff", + .start = 0x00000000, + .end = 0x000FFFFF, + .flags = IORESOURCE_MEM, }, { - .name = "ADSC_CPU_PCM_Buff", - .start = 0x00000000, - .end = 0x00009FFF, - .flags = IORESOURCE_MEM, + .name = "ADSC_CPU_PCM_Buff", + .start = 0x00000000, + .end = 0x00009FFF, + .flags = IORESOURCE_MEM, }, { - .name = "ADSC_AUX_Buff", - .start = 0x00000000, - .end = 0x00003FFF, - .flags = IORESOURCE_MEM, + .name = "ADSC_AUX_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, }, { - .name = "ADSC_Main_Buff", - .start = 0x00000000, - .end = 0x00003FFF, - .flags = IORESOURCE_MEM, + .name = "ADSC_Main_Buff", + .start = 0x00000000, + .end = 0x00003FFF, + .flags = IORESOURCE_MEM, }, /* * @@ -409,16 +409,16 @@ struct resource non_dvr_gaia_resources[] __initdata = { * Arbitrary Based Buffers: * This memory area is used for allocating buffers for Video decoding * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated + * by the STAVMEM driver of the STAPI. They could be Decimated * Picture Buffers, Intermediate Buffers, as deemed necessary for * video decoding purposes, for any video decoders on Zeus. * */ { - .name = "AVMEMPartition0", - .start = 0x63580000, - .end = 0x64180000 - 1, /* 12 MB total */ - .flags = IORESOURCE_IO, + .name = "AVMEMPartition0", + .start = 0x63580000, + .end = 0x64180000 - 1, /* 12 MB total */ + .flags = IORESOURCE_IO, }, /* * @@ -431,10 +431,10 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "Docsis", - .start = 0x62000000, - .end = 0x62700000 - 1, /* 7 MB total */ - .flags = IORESOURCE_IO, + .name = "Docsis", + .start = 0x62000000, + .end = 0x62700000 - 1, /* 7 MB total */ + .flags = IORESOURCE_IO, }, /* * @@ -447,10 +447,10 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "GraphicsHeap", - .start = 0x62700000, - .end = 0x63500000 - 1, /* 14 MB total */ - .flags = IORESOURCE_IO, + .name = "GraphicsHeap", + .start = 0x62700000, + .end = 0x63500000 - 1, /* 14 MB total */ + .flags = IORESOURCE_IO, }, /* * @@ -463,10 +463,10 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "MulticomSHM", - .start = 0x26000000, - .end = 0x26020000 - 1, - .flags = IORESOURCE_MEM, + .name = "MulticomSHM", + .start = 0x26000000, + .end = 0x26020000 - 1, + .flags = IORESOURCE_MEM, }, /* * @@ -479,10 +479,10 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "BMM_Buffer", - .start = 0x00000000, - .end = 0x000AA000 - 1, - .flags = IORESOURCE_MEM, + .name = "BMM_Buffer", + .start = 0x00000000, + .end = 0x000AA000 - 1, + .flags = IORESOURCE_MEM, }, /* * @@ -495,10 +495,10 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "DisplayBins0", - .start = 0x00000000, - .end = 0x00000FFF, /* 4 KB total */ - .flags = IORESOURCE_MEM, + .name = "DisplayBins0", + .start = 0x00000000, + .end = 0x00000FFF, /* 4 KB total */ + .flags = IORESOURCE_MEM, }, /* * @@ -511,10 +511,10 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "DisplayBins1", - .start = 0x64AD4000, - .end = 0x64AD5000 - 1, /* 4 KB total */ - .flags = IORESOURCE_IO, + .name = "DisplayBins1", + .start = 0x64AD4000, + .end = 0x64AD5000 - 1, /* 4 KB total */ + .flags = IORESOURCE_IO, }, /* * @@ -523,10 +523,10 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "AvfsDmaMem", - .start = 0x6430E000, - .end = 0x645D2C00 - 1, /* 945K * 3 for playback */ - .flags = IORESOURCE_IO, + .name = "AvfsDmaMem", + .start = 0x6430E000, + .end = 0x645D2C00 - 1, /* 945K * 3 for playback */ + .flags = IORESOURCE_IO, }, /* * @@ -539,10 +539,10 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "DiagPersistentMemory", - .start = 0x00000000, - .end = 0x10000 - 1, - .flags = IORESOURCE_MEM, + .name = "DiagPersistentMemory", + .start = 0x00000000, + .end = 0x10000 - 1, + .flags = IORESOURCE_MEM, }, /* * @@ -555,10 +555,10 @@ struct resource non_dvr_gaia_resources[] __initdata = { * */ { - .name = "SmartCardInfo", - .start = 0x64AD1000, - .end = 0x64AD3800 - 1, - .flags = IORESOURCE_IO, + .name = "SmartCardInfo", + .start = 0x64AD1000, + .end = 0x64AD3800 - 1, + .flags = IORESOURCE_IO, }, /* * @@ -568,22 +568,22 @@ struct resource non_dvr_gaia_resources[] __initdata = { * NP IPC - must be video bank 2 */ { - .name = "NP_Reset_Vector", - .start = 0x27c00000, - .end = 0x27c01000 - 1, - .flags = IORESOURCE_MEM, + .name = "NP_Reset_Vector", + .start = 0x27c00000, + .end = 0x27c01000 - 1, + .flags = IORESOURCE_MEM, }, { - .name = "NP_Image", - .start = 0x27020000, - .end = 0x27060000 - 1, - .flags = IORESOURCE_MEM, + .name = "NP_Image", + .start = 0x27020000, + .end = 0x27060000 - 1, + .flags = IORESOURCE_MEM, }, { - .name = "NP_IPC", - .start = 0x63500000, - .end = 0x63580000 - 1, - .flags = IORESOURCE_IO, + .name = "NP_IPC", + .start = 0x63500000, + .end = 0x63580000 - 1, + .flags = IORESOURCE_IO, }, { }, }; diff --git a/arch/mips/powertv/asic/prealloc-zeus.c b/arch/mips/powertv/asic/prealloc-zeus.c index 96480a2..6e76f09 100644 --- a/arch/mips/powertv/asic/prealloc-zeus.c +++ b/arch/mips/powertv/asic/prealloc-zeus.c @@ -17,8 +17,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> */ #include <linux/init.h> @@ -78,7 +78,7 @@ struct resource dvr_zeus_resources[] __initdata = * * This memory area is used for allocating buffers for Video decoding * purposes. Allocation/De-allocation within this buffer is managed - * by the STAVMEM driver of the STAPI. They could be Decimated + * by the STAVMEM driver of the STAPI. They could be Decimated * Picture Buffers, Intermediate Buffers, as deemed necessary for * video decoding purposes, for any video decoders on Zeus. */ @@ -175,7 +175,7 @@ struct resource dvr_zeus_resources[] __initdata = * End of Resource marker */ { - .flags = 0, + .flags = 0, }, }; @@ -299,6 +299,6 @@ struct resource non_dvr_zeus_resources[] __initdata = * End of Resource marker */ { - .flags = 0, + .flags = 0, }, }; diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c index c697935..5bd9d8f 100644 --- a/arch/mips/powertv/init.c +++ b/arch/mips/powertv/init.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. * All rights reserved. * Authors: Carsten Langgaard <carstenl@mips.com> * Maciej W. Rozycki <macro@mips.com> diff --git a/arch/mips/powertv/ioremap.c b/arch/mips/powertv/ioremap.c index a77c6f6..d060478 100644 --- a/arch/mips/powertv/ioremap.c +++ b/arch/mips/powertv/ioremap.c @@ -19,9 +19,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: David VomLehn <dvomlehn@cisco.com> + * Author: David VomLehn <dvomlehn@cisco.com> * - * Description: Defines the platform resources for the SA settop. + * Description: Defines the platform resources for the SA settop. * * NOTE: The bootloader allocates persistent memory at an address which is * 16 MiB below the end of the highest address in KSEG0. All fixed diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c index fb3d296..6e5f1bd 100644 --- a/arch/mips/powertv/memory.c +++ b/arch/mips/powertv/memory.c @@ -60,7 +60,7 @@ unsigned long ptv_memsize; * struct low_mem_reserved - Items in low memory that are reserved * @start: Physical address of item * @size: Size, in bytes, of this item - * @is_aliased: True if this is RAM aliased from another location. If false, + * @is_aliased: True if this is RAM aliased from another location. If false, * it is something other than aliased RAM and the RAM in the * unaliased address is still visible outside of low memory. */ diff --git a/arch/mips/powertv/powertv-usb.c b/arch/mips/powertv/powertv-usb.c index b0e2afa..d845eac 100644 --- a/arch/mips/powertv/powertv-usb.c +++ b/arch/mips/powertv/powertv-usb.c @@ -1,7 +1,7 @@ /* * powertv-usb.c * - * Description: ASIC-specific USB device setup and shutdown + * Description: ASIC-specific USB device setup and shutdown * * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. * Copyright (C) 2009 Cisco Systems, Inc. @@ -20,8 +20,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> * * NOTE: The bootloader allocates persistent memory at an address which is * 16 MiB below the end of the highest address in KSEG0. All fixed @@ -70,15 +70,15 @@ #define MCC2_GMII_RX2_CLOCK_SELECT (1 << 16) #define ETHER_CLK_CONFIG (MCC2_GMII_GCLK_TO_PAD | \ - MCC2_ETHER125_0_CLOCK_SELECT | \ + MCC2_ETHER125_0_CLOCK_SELECT | \ MCC2_RMII_0_CLOCK_SELECT | \ MCC2_GMII_TX0_CLOCK_SELECT | \ MCC2_GMII_RX0_CLOCK_SELECT | \ - MCC2_ETHER125_1_CLOCK_SELECT | \ + MCC2_ETHER125_1_CLOCK_SELECT | \ MCC2_RMII_1_CLOCK_SELECT | \ MCC2_GMII_TX1_CLOCK_SELECT | \ MCC2_GMII_RX1_CLOCK_SELECT | \ - MCC2_ETHER125_2_CLOCK_SELECT | \ + MCC2_ETHER125_2_CLOCK_SELECT | \ MCC2_RMII_2_CLOCK_SELECT | \ MCC2_GMII_TX2_CLOCK_SELECT | \ MCC2_GMII_RX2_CLOCK_SELECT) @@ -98,9 +98,9 @@ #define QAM_FS_DISABLE_DIVIDE_BY_3 (1 << 5) #define QAM_FS_ENABLE_PROGRAM (1 << 4) -#define QAM_FS_ENABLE_OUTPUT (1 << 3) -#define QAM_FS_SELECT_TEST_BYPASS (1 << 2) -#define QAM_FS_DISABLE_DIGITAL_STANDBY (1 << 1) +#define QAM_FS_ENABLE_OUTPUT (1 << 3) +#define QAM_FS_SELECT_TEST_BYPASS (1 << 2) +#define QAM_FS_DISABLE_DIGITAL_STANDBY (1 << 1) #define QAM_FS_CHOOSE_FS (1 << 0) /* Definitions for fs432x4a_ctl register */ @@ -142,14 +142,14 @@ static struct resource ehci_resources[] = { { .parent = &asic_resource, - .start = 0, - .end = 0xff, - .flags = IORESOURCE_MEM, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_MEM, }, { - .start = irq_usbehci, - .end = irq_usbehci, - .flags = IORESOURCE_IRQ, + .start = irq_usbehci, + .end = irq_usbehci, + .flags = IORESOURCE_IRQ, }, }; @@ -169,14 +169,14 @@ static struct platform_device ehci_device = { static struct resource ohci_resources[] = { { .parent = &asic_resource, - .start = 0, - .end = 0xff, - .flags = IORESOURCE_MEM, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_MEM, }, { - .start = irq_usbohci, - .end = irq_usbohci, - .flags = IORESOURCE_IRQ, + .start = irq_usbohci, + .end = irq_usbohci, + .flags = IORESOURCE_IRQ, }, }; @@ -207,9 +207,9 @@ static DEFINE_SPINLOCK(usb_regs_lock); * * QAM frequency selection code, which affects the frequency at which USB * runs. The frequency is calculated as: - * 2^15 * ndiv * Fin + * 2^15 * ndiv * Fin * Fout = ------------------------------------------------------------ - * (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32))) + * (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32))) * where: * Fin 54 MHz * ndiv QAM_FS_NSDIV_54MHZ ? 8 : 16 diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig new file mode 100644 index 0000000..a0b0197 --- /dev/null +++ b/arch/mips/ralink/Kconfig @@ -0,0 +1,32 @@ +if RALINK + +choice + prompt "Ralink SoC selection" + default SOC_RT305X + help + Select Ralink MIPS SoC type. + + config SOC_RT305X + bool "RT305x" + select USB_ARCH_HAS_HCD + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI + +endchoice + +choice + prompt "Devicetree selection" + default DTB_RT_NONE + help + Select the devicetree. + + config DTB_RT_NONE + bool "None" + + config DTB_RT305X_EVAL + bool "RT305x eval kit" + depends on SOC_RT305X + +endchoice + +endif diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile new file mode 100644 index 0000000..939757f --- /dev/null +++ b/arch/mips/ralink/Makefile @@ -0,0 +1,15 @@ +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation.# +# Makefile for the Ralink common stuff +# +# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> +# Copyright (C) 2013 John Crispin <blogic@openwrt.org> + +obj-y := prom.o of.o reset.o clk.o irq.o + +obj-$(CONFIG_SOC_RT305X) += rt305x.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-y += dts/ diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform new file mode 100644 index 0000000..6babd65 --- /dev/null +++ b/arch/mips/ralink/Platform @@ -0,0 +1,10 @@ +# +# Ralink SoC common stuff +# +core-$(CONFIG_RALINK) += arch/mips/ralink/ +cflags-$(CONFIG_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink + +# +# Ralink RT305x +# +load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000 diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c new file mode 100644 index 0000000..8dfa22f --- /dev/null +++ b/arch/mips/ralink/clk.c @@ -0,0 +1,72 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clkdev.h> +#include <linux/clk.h> + +#include <asm/time.h> + +#include "common.h" + +struct clk { + struct clk_lookup cl; + unsigned long rate; +}; + +void ralink_clk_add(const char *dev, unsigned long rate) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + if (!clk) + panic("failed to add clock\n"); + + clk->cl.dev_id = dev; + clk->cl.clk = clk; + + clk->rate = rate; + + clkdev_add(&clk->cl); +} + +/* + * Linux clock API + */ +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL_GPL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL_GPL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL_GPL(clk_get_rate); + +void __init plat_time_init(void) +{ + struct clk *clk; + + ralink_of_remap(); + + ralink_clk_init(); + clk = clk_get_sys("cpu", NULL); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000); + mips_hpt_frequency = clk_get_rate(clk) / 2; + clk_put(clk); +} diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h new file mode 100644 index 0000000..3009903 --- /dev/null +++ b/arch/mips/ralink/common.h @@ -0,0 +1,44 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#ifndef _RALINK_COMMON_H__ +#define _RALINK_COMMON_H__ + +#define RAMIPS_SYS_TYPE_LEN 32 + +struct ralink_pinmux_grp { + const char *name; + u32 mask; + int gpio_first; + int gpio_last; +}; + +struct ralink_pinmux { + struct ralink_pinmux_grp *mode; + struct ralink_pinmux_grp *uart; + int uart_shift; + void (*wdt_reset)(void); +}; +extern struct ralink_pinmux gpio_pinmux; + +struct ralink_soc_info { + unsigned char sys_type[RAMIPS_SYS_TYPE_LEN]; + unsigned char *compatible; +}; +extern struct ralink_soc_info soc_info; + +extern void ralink_of_remap(void); + +extern void ralink_clk_init(void); +extern void ralink_clk_add(const char *dev, unsigned long rate); + +extern void prom_soc_init(struct ralink_soc_info *soc_info); + +__iomem void *plat_of_remap_node(const char *node); + +#endif /* _RALINK_COMMON_H__ */ diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile new file mode 100644 index 0000000..1a69fb3 --- /dev/null +++ b/arch/mips/ralink/dts/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi new file mode 100644 index 0000000..069d066 --- /dev/null +++ b/arch/mips/ralink/dts/rt3050.dtsi @@ -0,0 +1,106 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3050-soc", "ralink,rt3052-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600 init=/init"; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + timer@100 { + compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt"; + reg = <0x100 0x100>; + }; + + intc: intc@200 { + compatible = "ralink,rt3052-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt3052-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + gpio0: gpio@600 { + compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; + reg = <0x600 0x34>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,ngpio = <24>; + ralink,regs = [ 00 04 08 0c + 20 24 28 2c + 30 34 ]; + }; + + gpio1: gpio@638 { + compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; + reg = <0x638 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,ngpio = <16>; + ralink,regs = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + }; + + gpio2: gpio@660 { + compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; + reg = <0x660 0x24>; + + gpio-controller; + #gpio-cells = <2>; + + ralink,ngpio = <12>; + ralink,regs = [ 00 04 08 0c + 10 14 18 1c + 20 24 ]; + }; + + uartlite@c00 { + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; +}; diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts new file mode 100644 index 0000000..148a590 --- /dev/null +++ b/arch/mips/ralink/dts/rt3052_eval.dts @@ -0,0 +1,52 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc"; + model = "Ralink RT3052 evaluation board"; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + palmbus@10000000 { + sysc@0 { + ralink,pinmmux = "uartlite", "spi"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <0>; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "calibration"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x7b0000>; + }; + }; +}; diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c new file mode 100644 index 0000000..c4ae47e --- /dev/null +++ b/arch/mips/ralink/early_printk.c @@ -0,0 +1,44 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/serial_reg.h> + +#include <asm/addrspace.h> + +#define EARLY_UART_BASE 0x10000c00 + +#define UART_REG_RX 0x00 +#define UART_REG_TX 0x04 +#define UART_REG_IER 0x08 +#define UART_REG_IIR 0x0c +#define UART_REG_FCR 0x10 +#define UART_REG_LCR 0x14 +#define UART_REG_MCR 0x18 +#define UART_REG_LSR 0x1c + +static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE); + +static inline void uart_w32(u32 val, unsigned reg) +{ + __raw_writel(val, uart_membase + reg); +} + +static inline u32 uart_r32(unsigned reg) +{ + return __raw_readl(uart_membase + reg); +} + +void prom_putchar(unsigned char ch) +{ + while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) + ; + uart_w32(ch, UART_REG_TX); + while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) + ; +} diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c new file mode 100644 index 0000000..6d054c5 --- /dev/null +++ b/arch/mips/ralink/irq.c @@ -0,0 +1,180 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/irqdomain.h> +#include <linux/interrupt.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include "common.h" + +/* INTC register offsets */ +#define INTC_REG_STATUS0 0x00 +#define INTC_REG_STATUS1 0x04 +#define INTC_REG_TYPE 0x20 +#define INTC_REG_RAW_STATUS 0x30 +#define INTC_REG_ENABLE 0x34 +#define INTC_REG_DISABLE 0x38 + +#define INTC_INT_GLOBAL BIT(31) + +#define RALINK_CPU_IRQ_INTC (MIPS_CPU_IRQ_BASE + 2) +#define RALINK_CPU_IRQ_FE (MIPS_CPU_IRQ_BASE + 5) +#define RALINK_CPU_IRQ_WIFI (MIPS_CPU_IRQ_BASE + 6) +#define RALINK_CPU_IRQ_COUNTER (MIPS_CPU_IRQ_BASE + 7) + +/* we have a cascade of 8 irqs */ +#define RALINK_INTC_IRQ_BASE 8 + +/* we have 32 SoC irqs */ +#define RALINK_INTC_IRQ_COUNT 32 + +#define RALINK_INTC_IRQ_PERFC (RALINK_INTC_IRQ_BASE + 9) + +static void __iomem *rt_intc_membase; + +static inline void rt_intc_w32(u32 val, unsigned reg) +{ + __raw_writel(val, rt_intc_membase + reg); +} + +static inline u32 rt_intc_r32(unsigned reg) +{ + return __raw_readl(rt_intc_membase + reg); +} + +static void ralink_intc_irq_unmask(struct irq_data *d) +{ + rt_intc_w32(BIT(d->hwirq), INTC_REG_ENABLE); +} + +static void ralink_intc_irq_mask(struct irq_data *d) +{ + rt_intc_w32(BIT(d->hwirq), INTC_REG_DISABLE); +} + +static struct irq_chip ralink_intc_irq_chip = { + .name = "INTC", + .irq_unmask = ralink_intc_irq_unmask, + .irq_mask = ralink_intc_irq_mask, + .irq_mask_ack = ralink_intc_irq_mask, +}; + +unsigned int __cpuinit get_c0_compare_int(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +static void ralink_intc_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + u32 pending = rt_intc_r32(INTC_REG_STATUS0); + + if (pending) { + struct irq_domain *domain = irq_get_handler_data(irq); + generic_handle_irq(irq_find_mapping(domain, __ffs(pending))); + } else { + spurious_interrupt(); + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(RALINK_CPU_IRQ_COUNTER); + + else if (pending & STATUSF_IP5) + do_IRQ(RALINK_CPU_IRQ_FE); + + else if (pending & STATUSF_IP6) + do_IRQ(RALINK_CPU_IRQ_WIFI); + + else if (pending & STATUSF_IP2) + do_IRQ(RALINK_CPU_IRQ_INTC); + + else + spurious_interrupt(); +} + +static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) +{ + irq_set_chip_and_handler(irq, &ralink_intc_irq_chip, handle_level_irq); + + return 0; +} + +static const struct irq_domain_ops irq_domain_ops = { + .xlate = irq_domain_xlate_onecell, + .map = intc_map, +}; + +static int __init intc_of_init(struct device_node *node, + struct device_node *parent) +{ + struct resource res; + struct irq_domain *domain; + int irq; + + irq = irq_of_parse_and_map(node, 0); + if (!irq) + panic("Failed to get INTC IRQ"); + + if (of_address_to_resource(node, 0, &res)) + panic("Failed to get intc memory range"); + + if (request_mem_region(res.start, resource_size(&res), + res.name) < 0) + pr_err("Failed to request intc memory"); + + rt_intc_membase = ioremap_nocache(res.start, + resource_size(&res)); + if (!rt_intc_membase) + panic("Failed to remap intc memory"); + + /* disable all interrupts */ + rt_intc_w32(~0, INTC_REG_DISABLE); + + /* route all INTC interrupts to MIPS HW0 interrupt */ + rt_intc_w32(0, INTC_REG_TYPE); + + domain = irq_domain_add_legacy(node, RALINK_INTC_IRQ_COUNT, + RALINK_INTC_IRQ_BASE, 0, &irq_domain_ops, NULL); + if (!domain) + panic("Failed to add irqdomain"); + + rt_intc_w32(INTC_INT_GLOBAL, INTC_REG_ENABLE); + + irq_set_chained_handler(irq, ralink_intc_irq_handler); + irq_set_handler_data(irq, domain); + + cp0_perfcount_irq = irq_create_mapping(domain, 9); + + return 0; +} + +static struct of_device_id __initdata of_irq_ids[] = { + { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init }, + { .compatible = "ralink,rt2880-intc", .data = intc_of_init }, + {}, +}; + +void __init arch_init_irq(void) +{ + of_irq_init(of_irq_ids); +} + diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c new file mode 100644 index 0000000..4165e70 --- /dev/null +++ b/arch/mips/ralink/of.c @@ -0,0 +1,107 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/of_fdt.h> +#include <linux/kernel.h> +#include <linux/bootmem.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> + +#include <asm/reboot.h> +#include <asm/bootinfo.h> +#include <asm/addrspace.h> + +#include "common.h" + +__iomem void *rt_sysc_membase; +__iomem void *rt_memc_membase; + +extern struct boot_param_header __dtb_start; + +__iomem void *plat_of_remap_node(const char *node) +{ + struct resource res; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, node); + if (!np) + panic("Failed to find %s node", node); + + if (of_address_to_resource(np, 0, &res)) + panic("Failed to get resource for %s", node); + + if ((request_mem_region(res.start, + resource_size(&res), + res.name) < 0)) + panic("Failed to request resources for %s", node); + + return ioremap_nocache(res.start, resource_size(&res)); +} + +void __init device_tree_init(void) +{ + unsigned long base, size; + void *fdt_copy; + + if (!initial_boot_params) + return; + + base = virt_to_phys((void *)initial_boot_params); + size = be32_to_cpu(initial_boot_params->totalsize); + + /* Before we do anything, lets reserve the dt blob */ + reserve_bootmem(base, size, BOOTMEM_DEFAULT); + + /* The strings in the flattened tree are referenced directly by the + * device tree, so copy the flattened device tree from init memory + * to regular memory. + */ + fdt_copy = alloc_bootmem(size); + memcpy(fdt_copy, initial_boot_params, size); + initial_boot_params = fdt_copy; + + unflatten_device_tree(); + + /* free the space reserved for the dt blob */ + free_bootmem(base, size); +} + +void __init plat_mem_setup(void) +{ + set_io_port_base(KSEG1); + + /* + * Load the builtin devicetree. This causes the chosen node to be + * parsed resulting in our memory appearing + */ + __dt_setup_arch(&__dtb_start); +} + +static int __init plat_of_setup(void) +{ + static struct of_device_id of_ids[3]; + int len = sizeof(of_ids[0].compatible); + + if (!of_have_populated_dt()) + panic("device tree not present"); + + strncpy(of_ids[0].compatible, soc_info.compatible, len); + strncpy(of_ids[1].compatible, "palmbus", len); + + if (of_platform_populate(NULL, of_ids, NULL, NULL)) + panic("failed to populate DT\n"); + + return 0; +} + +arch_initcall(plat_of_setup); diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c new file mode 100644 index 0000000..9c64f02 --- /dev/null +++ b/arch/mips/ralink/prom.c @@ -0,0 +1,69 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/string.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/bootinfo.h> +#include <asm/addrspace.h> + +#include "common.h" + +struct ralink_soc_info soc_info; + +const char *get_system_type(void) +{ + return soc_info.sys_type; +} + +static __init void prom_init_cmdline(int argc, char **argv) +{ + int i; + + pr_debug("prom: fw_arg0=%08x fw_arg1=%08x fw_arg2=%08x fw_arg3=%08x\n", + (unsigned int)fw_arg0, (unsigned int)fw_arg1, + (unsigned int)fw_arg2, (unsigned int)fw_arg3); + + argc = fw_arg0; + argv = (char **) KSEG1ADDR(fw_arg1); + + if (!argv) { + pr_debug("argv=%p is invalid, skipping\n", + argv); + return; + } + + for (i = 0; i < argc; i++) { + char *p = (char *) KSEG1ADDR(argv[i]); + + if (CPHYSADDR(p) && *p) { + pr_debug("argv[%d]: %s\n", i, p); + strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); + strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); + } + } +} + +void __init prom_init(void) +{ + int argc; + char **argv; + + prom_soc_init(&soc_info); + + pr_info("SoC Type: %s\n", get_system_type()); + + prom_init_cmdline(argc, argv); +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c new file mode 100644 index 0000000..22120e5 --- /dev/null +++ b/arch/mips/ralink/reset.c @@ -0,0 +1,44 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/pm.h> +#include <linux/io.h> + +#include <asm/reboot.h> + +#include <asm/mach-ralink/ralink_regs.h> + +/* Reset Control */ +#define SYSC_REG_RESET_CTRL 0x034 +#define RSTCTL_RESET_SYSTEM BIT(0) + +static void ralink_restart(char *command) +{ + local_irq_disable(); + rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL); + unreachable(); +} + +static void ralink_halt(void) +{ + local_irq_disable(); + unreachable(); +} + +static int __init mips_reboot_setup(void) +{ + _machine_restart = ralink_restart; + _machine_halt = ralink_halt; + pm_power_off = ralink_halt; + + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c new file mode 100644 index 0000000..0a4bbdc --- /dev/null +++ b/arch/mips/ralink/rt305x.c @@ -0,0 +1,242 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mipsregs.h> +#include <asm/mach-ralink/ralink_regs.h> +#include <asm/mach-ralink/rt305x.h> + +#include "common.h" + +enum rt305x_soc_type rt305x_soc; + +struct ralink_pinmux_grp mode_mux[] = { + { + .name = "i2c", + .mask = RT305X_GPIO_MODE_I2C, + .gpio_first = RT305X_GPIO_I2C_SD, + .gpio_last = RT305X_GPIO_I2C_SCLK, + }, { + .name = "spi", + .mask = RT305X_GPIO_MODE_SPI, + .gpio_first = RT305X_GPIO_SPI_EN, + .gpio_last = RT305X_GPIO_SPI_CLK, + }, { + .name = "uartlite", + .mask = RT305X_GPIO_MODE_UART1, + .gpio_first = RT305X_GPIO_UART1_TXD, + .gpio_last = RT305X_GPIO_UART1_RXD, + }, { + .name = "jtag", + .mask = RT305X_GPIO_MODE_JTAG, + .gpio_first = RT305X_GPIO_JTAG_TDO, + .gpio_last = RT305X_GPIO_JTAG_TDI, + }, { + .name = "mdio", + .mask = RT305X_GPIO_MODE_MDIO, + .gpio_first = RT305X_GPIO_MDIO_MDC, + .gpio_last = RT305X_GPIO_MDIO_MDIO, + }, { + .name = "sdram", + .mask = RT305X_GPIO_MODE_SDRAM, + .gpio_first = RT305X_GPIO_SDRAM_MD16, + .gpio_last = RT305X_GPIO_SDRAM_MD31, + }, { + .name = "rgmii", + .mask = RT305X_GPIO_MODE_RGMII, + .gpio_first = RT305X_GPIO_GE0_TXD0, + .gpio_last = RT305X_GPIO_GE0_RXCLK, + }, {0} +}; + +struct ralink_pinmux_grp uart_mux[] = { + { + .name = "uartf", + .mask = RT305X_GPIO_MODE_UARTF, + .gpio_first = RT305X_GPIO_7, + .gpio_last = RT305X_GPIO_14, + }, { + .name = "pcm uartf", + .mask = RT305X_GPIO_MODE_PCM_UARTF, + .gpio_first = RT305X_GPIO_7, + .gpio_last = RT305X_GPIO_14, + }, { + .name = "pcm i2s", + .mask = RT305X_GPIO_MODE_PCM_I2S, + .gpio_first = RT305X_GPIO_7, + .gpio_last = RT305X_GPIO_14, + }, { + .name = "i2s uartf", + .mask = RT305X_GPIO_MODE_I2S_UARTF, + .gpio_first = RT305X_GPIO_7, + .gpio_last = RT305X_GPIO_14, + }, { + .name = "pcm gpio", + .mask = RT305X_GPIO_MODE_PCM_GPIO, + .gpio_first = RT305X_GPIO_10, + .gpio_last = RT305X_GPIO_14, + }, { + .name = "gpio uartf", + .mask = RT305X_GPIO_MODE_GPIO_UARTF, + .gpio_first = RT305X_GPIO_7, + .gpio_last = RT305X_GPIO_14, + }, { + .name = "gpio i2s", + .mask = RT305X_GPIO_MODE_GPIO_I2S, + .gpio_first = RT305X_GPIO_7, + .gpio_last = RT305X_GPIO_14, + }, { + .name = "gpio", + .mask = RT305X_GPIO_MODE_GPIO, + }, {0} +}; + +void rt305x_wdt_reset(void) +{ + u32 t; + + /* enable WDT reset output on pin SRAM_CS_N */ + t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); + t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT << + RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT; + rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG); +} + +struct ralink_pinmux gpio_pinmux = { + .mode = mode_mux, + .uart = uart_mux, + .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT, + .wdt_reset = rt305x_wdt_reset, +}; + +void __init ralink_clk_init(void) +{ + unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate; + u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); + + if (soc_is_rt305x() || soc_is_rt3350()) { + t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) & + RT305X_SYSCFG_CPUCLK_MASK; + switch (t) { + case RT305X_SYSCFG_CPUCLK_LOW: + cpu_rate = 320000000; + break; + case RT305X_SYSCFG_CPUCLK_HIGH: + cpu_rate = 384000000; + break; + } + sys_rate = uart_rate = wdt_rate = cpu_rate / 3; + } else if (soc_is_rt3352()) { + t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) & + RT3352_SYSCFG0_CPUCLK_MASK; + switch (t) { + case RT3352_SYSCFG0_CPUCLK_LOW: + cpu_rate = 384000000; + break; + case RT3352_SYSCFG0_CPUCLK_HIGH: + cpu_rate = 400000000; + break; + } + sys_rate = wdt_rate = cpu_rate / 3; + uart_rate = 40000000; + } else if (soc_is_rt5350()) { + t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) & + RT5350_SYSCFG0_CPUCLK_MASK; + switch (t) { + case RT5350_SYSCFG0_CPUCLK_360: + cpu_rate = 360000000; + sys_rate = cpu_rate / 3; + break; + case RT5350_SYSCFG0_CPUCLK_320: + cpu_rate = 320000000; + sys_rate = cpu_rate / 4; + break; + case RT5350_SYSCFG0_CPUCLK_300: + cpu_rate = 300000000; + sys_rate = cpu_rate / 3; + break; + default: + BUG(); + } + uart_rate = 40000000; + wdt_rate = sys_rate; + } else { + BUG(); + } + + ralink_clk_add("cpu", cpu_rate); + ralink_clk_add("10000b00.spi", sys_rate); + ralink_clk_add("10000100.timer", wdt_rate); + ralink_clk_add("10000500.uart", uart_rate); + ralink_clk_add("10000c00.uartlite", uart_rate); +} + +void __init ralink_of_remap(void) +{ + rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc"); + rt_memc_membase = plat_of_remap_node("ralink,rt3050-memc"); + + if (!rt_sysc_membase || !rt_memc_membase) + panic("Failed to remap core resources"); +} + +void prom_soc_init(struct ralink_soc_info *soc_info) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); + unsigned char *name; + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); + + if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) { + unsigned long icache_sets; + + icache_sets = (read_c0_config1() >> 22) & 7; + if (icache_sets == 1) { + rt305x_soc = RT305X_SOC_RT3050; + name = "RT3050"; + soc_info->compatible = "ralink,rt3050-soc"; + } else { + rt305x_soc = RT305X_SOC_RT3052; + name = "RT3052"; + soc_info->compatible = "ralink,rt3052-soc"; + } + } else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) { + rt305x_soc = RT305X_SOC_RT3350; + name = "RT3350"; + soc_info->compatible = "ralink,rt3350-soc"; + } else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) { + rt305x_soc = RT305X_SOC_RT3352; + name = "RT3352"; + soc_info->compatible = "ralink,rt3352-soc"; + } else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) { + rt305x_soc = RT305X_SOC_RT5350; + name = "RT5350"; + soc_info->compatible = "ralink,rt5350-soc"; + } else { + panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); + } + + id = __raw_readl(sysc + SYSC_REG_CHIP_ID); + + snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %s id:%u rev:%u", + name, + (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, + (id & CHIP_ID_REV_MASK)); +} diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 716e9a1..3af00b2 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -215,9 +215,9 @@ static struct resource rb532_wdt_res[] = { }; static struct platform_device rb532_wdt = { - .name = "rc32434_wdt", - .id = -1, - .resource = rb532_wdt_res, + .name = "rc32434_wdt", + .id = -1, + .resource = rb532_wdt_res, .num_resources = ARRAY_SIZE(rb532_wdt_res), }; @@ -235,8 +235,8 @@ static struct plat_serial8250_port rb532_uart_res[] = { }; static struct platform_device rb532_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, .dev.platform_data = &rb532_uart_res, }; @@ -273,7 +273,7 @@ static void __init parse_mac_addr(char *macstr) /* NAND definitions */ -#define NAND_CHIP_DELAY 25 +#define NAND_CHIP_DELAY 25 static void __init rb532_nand_setup(void) { diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 6ec41df..a180076 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -44,10 +44,10 @@ struct rb532_gpio_chip { static struct resource rb532_gpio_reg0_res[] = { { - .name = "gpio_reg0", - .start = REGBASE + GPIOBASE, - .end = REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1, - .flags = IORESOURCE_MEM, + .name = "gpio_reg0", + .start = REGBASE + GPIOBASE, + .end = REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1, + .flags = IORESOURCE_MEM, } }; diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c index f298430..3a431e8 100644 --- a/arch/mips/rb532/irq.c +++ b/arch/mips/rb532/irq.c @@ -21,7 +21,7 @@ * * Copyright 2002 MontaVista Software Inc. * Author: MontaVista Software, Inc. - * stevel@mvista.com or source@mvista.com + * stevel@mvista.com or source@mvista.com */ #include <linux/bitops.h> @@ -51,7 +51,7 @@ struct intr_group { volatile u32 *base_addr; }; -#define RC32434_NR_IRQS (GROUP4_IRQ_BASE + 32) +#define RC32434_NR_IRQS (GROUP4_IRQ_BASE + 32) #if (NR_IRQS < RC32434_NR_IRQS) #error Too little irqs defined. Did you override <asm/irq.h> ? diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c index 4a6057b..a0a7922 100644 --- a/arch/mips/sgi-ip22/ip22-eisa.c +++ b/arch/mips/sgi-ip22/ip22-eisa.c @@ -2,7 +2,7 @@ * Basic EISA bus support for the SGI Indigo-2. * * (C) 2002 Pascal Dameme <netinet@freesurf.fr> - * and Marc Zyngier <mzyngier@freesurf.fr> + * and Marc Zyngier <mzyngier@freesurf.fr> * * This code is released under both the GPL version 2 and BSD * licenses. Either license may be used. @@ -40,13 +40,13 @@ /* I2 has four EISA slots. */ #define IP22_EISA_MAX_SLOTS 4 -#define EISA_MAX_IRQ 16 +#define EISA_MAX_IRQ 16 -#define EIU_MODE_REG 0x0001ffc0 -#define EIU_STAT_REG 0x0001ffc4 -#define EIU_PREMPT_REG 0x0001ffc8 -#define EIU_QUIET_REG 0x0001ffcc -#define EIU_INTRPT_ACK 0x00010004 +#define EIU_MODE_REG 0x0001ffc0 +#define EIU_STAT_REG 0x0001ffc4 +#define EIU_PREMPT_REG 0x0001ffc8 +#define EIU_QUIET_REG 0x0001ffcc +#define EIU_INTRPT_ACK 0x00010004 static char __init *decode_eisa_sig(unsigned long addr) { diff --git a/arch/mips/sgi-ip22/ip22-gio.c b/arch/mips/sgi-ip22/ip22-gio.c index f5ebc09..ab0e379 100644 --- a/arch/mips/sgi-ip22/ip22-gio.c +++ b/arch/mips/sgi-ip22/ip22-gio.c @@ -15,7 +15,7 @@ static struct bus_type gio_bus_type; static struct { const char *name; - __u8 id; + __u8 id; } gio_name_table[] = { { .name = "SGI Impact", .id = 0x10 }, { .name = "Phobos G160", .id = 0x35 }, @@ -376,15 +376,15 @@ static void ip22_check_gio(int slotno, unsigned long addr) } static struct bus_type gio_bus_type = { - .name = "gio", + .name = "gio", .dev_attrs = gio_dev_attrs, - .match = gio_bus_match, - .probe = gio_device_probe, - .remove = gio_device_remove, + .match = gio_bus_match, + .probe = gio_device_probe, + .remove = gio_device_remove, .suspend = gio_device_suspend, - .resume = gio_device_resume, + .resume = gio_device_resume, .shutdown = gio_device_shutdown, - .uevent = gio_device_uevent, + .uevent = gio_device_uevent, }; static struct resource gio_bus_resource = { diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index 3f2b763..3db64d5 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -1,12 +1,12 @@ /* * ip22-int.c: Routines for generic manipulation of the INT[23] ASIC - * found on INDY and Indigo2 workstations. + * found on INDY and Indigo2 workstations. * * Copyright (C) 1996 David S. Miller (davem@davemloft.net) * Copyright (C) 1997, 1998 Ralf Baechle (ralf@gnu.org) * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu) - * - Indigo2 changes - * - Interrupt handling fixes + * - Indigo2 changes + * - Interrupt handling fixes * Copyright (C) 2001, 2003 Ladislav Michl (ladis@linux-mips.org) */ #include <linux/types.h> @@ -195,24 +195,24 @@ extern void indy_8254timer_irq(void); * at all) like: * * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Local IRQ level zero - * 3 Local IRQ level one - * 4 8254 Timer zero - * 5 8254 Timer one - * 6 Bus Error - * 7 R4k timer (what we use) + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Local IRQ level zero + * 3 Local IRQ level one + * 4 8254 Timer zero + * 5 8254 Timer one + * 6 Bus Error + * 7 R4k timer (what we use) * * We handle the IRQ according to _our_ priority which is: * - * Highest ---- R4k Timer - * Local IRQ zero - * Local IRQ one - * Bus Error - * 8254 Timer zero - * Lowest ---- 8254 Timer one + * Highest ---- R4k Timer + * Local IRQ zero + * Local IRQ one + * Bus Error + * 8254 Timer zero + * Lowest ---- 8254 Timer one * * then we just return, if multiple IRQs are pending then we will just take * another exception, big deal. diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c index 75ada8a..7cec0a4 100644 --- a/arch/mips/sgi-ip22/ip22-mc.c +++ b/arch/mips/sgi-ip22/ip22-mc.c @@ -121,22 +121,22 @@ void __init sgimc_init(void) */ /* Step 0: Make sure we turn off the watchdog in case it's - * still running (which might be the case after a - * soft reboot). + * still running (which might be the case after a + * soft reboot). */ tmp = sgimc->cpuctrl0; tmp &= ~SGIMC_CCTRL0_WDOG; sgimc->cpuctrl0 = tmp; /* Step 1: The CPU/GIO error status registers will not latch - * up a new error status until the register has been - * cleared by the cpu. These status registers are - * cleared by writing any value to them. + * up a new error status until the register has been + * cleared by the cpu. These status registers are + * cleared by writing any value to them. */ sgimc->cstat = sgimc->gstat = 0; /* Step 2: Enable all parity checking in cpu control register - * zero. + * zero. */ /* don't touch parity settings for IP28 */ tmp = sgimc->cpuctrl0; @@ -147,7 +147,7 @@ void __init sgimc_init(void) sgimc->cpuctrl0 = tmp; /* Step 3: Setup the MC write buffer depth, this is controlled - * in cpu control register 1 in the lower 4 bits. + * in cpu control register 1 in the lower 4 bits. */ tmp = sgimc->cpuctrl1; tmp &= ~0xf; @@ -155,26 +155,26 @@ void __init sgimc_init(void) sgimc->cpuctrl1 = tmp; /* Step 4: Initialize the RPSS divider register to run as fast - * as it can correctly operate. The register is laid - * out as follows: + * as it can correctly operate. The register is laid + * out as follows: * - * ---------------------------------------- - * | RESERVED | INCREMENT | DIVIDER | - * ---------------------------------------- - * 31 16 15 8 7 0 + * ---------------------------------------- + * | RESERVED | INCREMENT | DIVIDER | + * ---------------------------------------- + * 31 16 15 8 7 0 * - * DIVIDER determines how often a 'tick' happens, - * INCREMENT determines by how the RPSS increment - * registers value increases at each 'tick'. Thus, - * for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101 + * DIVIDER determines how often a 'tick' happens, + * INCREMENT determines by how the RPSS increment + * registers value increases at each 'tick'. Thus, + * for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101 */ sgimc->divider = 0x101; /* Step 5: Initialize GIO64 arbitrator configuration register. * * NOTE: HPC init code in sgihpc_init() must run before us because - * we need to know Guiness vs. FullHouse and the board - * revision on this machine. You have been warned. + * we need to know Guiness vs. FullHouse and the board + * revision on this machine. You have been warned. */ /* First the basic invariants across all GIO64 implementations. */ @@ -187,18 +187,18 @@ void __init sgimc_init(void) if (SGIOC_SYSID_BOARDREV(sgioc->sysid) < 2) { tmp |= SGIMC_GIOPAR_HPC264; /* 2nd HPC at 64bits */ tmp |= SGIMC_GIOPAR_PLINEEXP0; /* exp0 pipelines */ - tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */ + tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */ tmp |= SGIMC_GIOPAR_RTIMEEXP0; /* exp0 is realtime */ } else { tmp |= SGIMC_GIOPAR_HPC264; /* 2nd HPC 64bits */ tmp |= SGIMC_GIOPAR_PLINEEXP0; /* exp[01] pipelined */ tmp |= SGIMC_GIOPAR_PLINEEXP1; - tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */ + tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */ } } else { /* Guiness specific settings. */ tmp |= SGIMC_GIOPAR_EISA64; /* MC talks to EISA at 64bits */ - tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */ + tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */ } sgimc->giopar = tmp; /* poof */ diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c index 0177566..e077036 100644 --- a/arch/mips/sgi-ip22/ip22-nvram.c +++ b/arch/mips/sgi-ip22/ip22-nvram.c @@ -14,11 +14,11 @@ #define EEPROM_WRITE 0xa000 /* serial memory write */ #define EEPROM_WRALL 0x8800 /* write all registers */ #define EEPROM_WDS 0x8000 /* disable all programming */ -#define EEPROM_PRREAD 0xc000 /* read protect register */ -#define EEPROM_PREN 0x9800 /* enable protect register mode */ -#define EEPROM_PRCLEAR 0xffff /* clear protect register */ -#define EEPROM_PRWRITE 0xa000 /* write protect register */ -#define EEPROM_PRDS 0x8000 /* disable protect register, forever */ +#define EEPROM_PRREAD 0xc000 /* read protect register */ +#define EEPROM_PREN 0x9800 /* enable protect register mode */ +#define EEPROM_PRCLEAR 0xffff /* clear protect register */ +#define EEPROM_PRWRITE 0xa000 /* write protect register */ +#define EEPROM_PRDS 0x8000 /* disable protect register, forever */ #define EEPROM_EPROT 0x01 /* Protect register enable */ #define EEPROM_CSEL 0x02 /* Chip select */ @@ -27,7 +27,7 @@ #define EEPROM_DATI 0x10 /* Data in */ /* We need to use these functions early... */ -#define delay() ({ \ +#define delay() ({ \ int x; \ for (x=0; x<100000; x++) __asm__ __volatile__(""); }) @@ -35,7 +35,7 @@ __raw_writel(__raw_readl(ptr) & ~EEPROM_DATO, ptr); \ __raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr); \ __raw_writel(__raw_readl(ptr) & ~EEPROM_EPROT, ptr); \ - delay(); \ + delay(); \ __raw_writel(__raw_readl(ptr) | EEPROM_CSEL, ptr); \ __raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); }) @@ -46,7 +46,7 @@ __raw_writel(__raw_readl(ptr) | EEPROM_EPROT, ptr); \ __raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); }) -#define BITS_IN_COMMAND 11 +#define BITS_IN_COMMAND 11 /* * clock in the nvram command and the register number. For the * national semiconductor nv ram chip the op code is 3 bits and diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index 698904d..a14fd32 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -137,7 +137,7 @@ static int __init sgiseeq_devinit(void) eth0_pd.hpc = hpc3c0; eth0_pd.irq = SGI_ENET_IRQ; -#define EADDR_NVOFS 250 +#define EADDR_NVOFS 250 for (i = 0; i < 3; i++) { unsigned short tmp = ip22_nvram_read(EADDR_NVOFS / 2 + i); @@ -155,17 +155,17 @@ static int __init sgiseeq_devinit(void) return 0; sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 | - SGIMC_GIOPAR_HPC264; + SGIMC_GIOPAR_HPC264; hpc3c1->pbus_piocfg[0][0] = 0x3ffff; /* interrupt/config register on Challenge S Mezz board */ hpc3c1->pbus_extregs[0][0] = 0x30; eth1_pd.hpc = hpc3c1; eth1_pd.irq = SGI_GIO_0_IRQ; -#define EADDR_NVOFS 250 +#define EADDR_NVOFS 250 for (i = 0; i < 3; i++) { unsigned short tmp = ip22_eeprom_read(&hpc3c1->eeprom, - EADDR_NVOFS / 2 + i); + EADDR_NVOFS / 2 + i); eth1_pd.mac[2 * i] = tmp >> 8; eth1_pd.mac[2 * i + 1] = tmp & 0xff; diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c index 20363d2..063c2dd 100644 --- a/arch/mips/sgi-ip22/ip22-reset.c +++ b/arch/mips/sgi-ip22/ip22-reset.c @@ -101,7 +101,7 @@ static void debounce(unsigned long data) del_timer(&debounce_timer); if (sgint->istat1 & SGINT_ISTAT1_PWR) { /* Interrupt still being sent. */ - debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s */ + debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s */ add_timer(&debounce_timer); sgioc->panel = SGIOC_PANEL_POWERON | SGIOC_PANEL_POWERINTR | @@ -166,7 +166,7 @@ static irqreturn_t panel_int(int irq, void *dev_id) } static int panic_event(struct notifier_block *this, unsigned long event, - void *ptr) + void *ptr) { if (machine_state & MACHINE_PANICED) return NOTIFY_DONE; diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c index 0626555..3f47346 100644 --- a/arch/mips/sgi-ip22/ip28-berr.c +++ b/arch/mips/sgi-ip22/ip28-berr.c @@ -136,14 +136,14 @@ static void save_and_clear_buserr(void) hpc3.scsi[1].cbp = hpc3c0->scsi_chan1.cbptr; hpc3.scsi[1].ndptr = hpc3c0->scsi_chan1.ndptr; - hpc3.ethrx.addr = (unsigned long)&hpc3c0->ethregs.rx_cbptr; - hpc3.ethrx.ctrl = hpc3c0->ethregs.rx_ctrl; /* HPC3_ERXCTRL_ACTIVE ? */ - hpc3.ethrx.cbp = hpc3c0->ethregs.rx_cbptr; + hpc3.ethrx.addr = (unsigned long)&hpc3c0->ethregs.rx_cbptr; + hpc3.ethrx.ctrl = hpc3c0->ethregs.rx_ctrl; /* HPC3_ERXCTRL_ACTIVE ? */ + hpc3.ethrx.cbp = hpc3c0->ethregs.rx_cbptr; hpc3.ethrx.ndptr = hpc3c0->ethregs.rx_ndptr; - hpc3.ethtx.addr = (unsigned long)&hpc3c0->ethregs.tx_cbptr; - hpc3.ethtx.ctrl = hpc3c0->ethregs.tx_ctrl; /* HPC3_ETXCTRL_ACTIVE ? */ - hpc3.ethtx.cbp = hpc3c0->ethregs.tx_cbptr; + hpc3.ethtx.addr = (unsigned long)&hpc3c0->ethregs.tx_cbptr; + hpc3.ethtx.ctrl = hpc3c0->ethregs.tx_ctrl; /* HPC3_ETXCTRL_ACTIVE ? */ + hpc3.ethtx.cbp = hpc3c0->ethregs.tx_cbptr; hpc3.ethtx.ndptr = hpc3c0->ethregs.tx_ndptr; for (i = 0; i < 8; ++i) { @@ -196,11 +196,11 @@ static void print_cache_tags(void) scb | (1 << 12)*i); } i = read_c0_config(); - scb = i & (1 << 13) ? 7:6; /* scblksize = 2^[7..6] */ + scb = i & (1 << 13) ? 7:6; /* scblksize = 2^[7..6] */ scw = ((i >> 16) & 7) + 19 - 1; /* scwaysize = 2^[24..19] / 2 */ i = ((1 << scw) - 1) & ~((1 << scb) - 1); - printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x (PA[%u:%u] %05x)\n", + printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x (PA[%u:%u] %05x)\n", cache_tags.tags[0][0].hi, cache_tags.tags[0][0].lo, cache_tags.tags[0][1].hi, cache_tags.tags[0][1].lo, scw-1, scb, i & (unsigned)cache_tags.err_addr); diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c index 04cebad..692778d 100644 --- a/arch/mips/sgi-ip27/ip27-berr.c +++ b/arch/mips/sgi-ip27/ip27-berr.c @@ -39,7 +39,7 @@ static void dump_hub_information(unsigned long errst0, unsigned long errst1) printk("Hub has valid error information:\n"); if (errst0 & PI_ERR_ST0_OVERRUN_MASK) - printk("Overrun is set. Error stack may contain additional " + printk("Overrun is set. Error stack may contain additional " "information.\n"); printk("Hub error address is %08lx\n", (errst0 & PI_ERR_ST0_ADDR_MASK) >> (PI_ERR_ST0_ADDR_SHFT - 3)); @@ -85,7 +85,7 @@ void __init ip27_be_init(void) board_be_handler = ip27_be_handler; LOCAL_HUB_S(PI_ERR_INT_PEND, - cpu ? PI_ERR_CLEAR_ALL_B : PI_ERR_CLEAR_ALL_A); + cpu ? PI_ERR_CLEAR_ALL_B : PI_ERR_CLEAR_ALL_A); LOCAL_HUB_S(PI_ERR_INT_MASK_A + cpuoff, 0); LOCAL_HUB_S(PI_ERR_STACK_ADDR_A + cpuoff, 0); LOCAL_HUB_S(PI_ERR_STACK_SIZE, 0); /* Disable error stack */ diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c index 984e561..b952d5b 100644 --- a/arch/mips/sgi-ip27/ip27-console.c +++ b/arch/mips/sgi-ip27/ip27-console.c @@ -31,7 +31,7 @@ static inline struct ioc3_uartregs *console_uart(void) return &ioc3->sregs.uarta; } -void __init prom_putchar(char c) +void prom_putchar(char c) { struct ioc3_uartregs *uart = console_uart(); diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c index cd0d5b0..328ceb3 100644 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ b/arch/mips/sgi-ip27/ip27-hubio.c @@ -17,11 +17,11 @@ static int force_fire_and_forget = 1; /** - * hub_pio_map - establish a HUB PIO mapping + * hub_pio_map - establish a HUB PIO mapping * * @hub: hub to perform PIO mapping on * @widget: widget ID to perform PIO mapping for - * @xtalk_addr: xtalk_address that needs to be mapped + * @xtalk_addr: xtalk_address that needs to be mapped * @size: size of the PIO mapping * **/ @@ -78,8 +78,8 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, /* * hub_setup_prb(nasid, prbnum, credits, conveyor) * - * Put a PRB into fire-and-forget mode if conveyor isn't set. Otherwise, - * put it into conveyor belt mode with the specified number of credits. + * Put a PRB into fire-and-forget mode if conveyor isn't set. Otherwise, + * put it into conveyor belt mode with the specified number of credits. */ static void hub_setup_prb(nasid_t nasid, int prbnum, int credits) { @@ -125,12 +125,12 @@ static void hub_setup_prb(nasid_t nasid, int prbnum, int credits) * so we turn off access to all widgets for the duration of the function. * * XXX - This code should really check what kind of widget we're talking - * to. Bridges can only handle three requests, but XG will do more. + * to. Bridges can only handle three requests, but XG will do more. * How many can crossbow handle to widget 0? We're assuming 1. * * XXX - There is a bug in the crossbow that link reset PIOs do not * return write responses. The easiest solution to this problem is to - * leave widget 0 (xbow) in fire-and-forget mode at all times. This + * leave widget 0 (xbow) in fire-and-forget mode at all times. This * only affects pio's to xbow registers, which should be rare. **/ static void hub_set_piomode(nasid_t nasid) @@ -167,7 +167,7 @@ static void hub_set_piomode(nasid_t nasid) } /* - * hub_pio_init - PIO-related hub initialization + * hub_pio_init - PIO-related hub initialization * * @hub: hubinfo structure for our hub */ diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 923c080..d41b1c6 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -151,7 +151,7 @@ nasid_t get_nasid(void) { return (nasid_t)((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_NODEID_MASK) - >> NSRI_NODEID_SHFT); + >> NSRI_NODEID_SHFT); } /* diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 69a939ae..2315cfe 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -62,7 +62,7 @@ extern int irq_to_slot[]; * from the irq value */ #define IRQ_TO_BRIDGE(i) irq_to_bridge[(i)] -#define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i] +#define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i] static inline int alloc_level(int cpu, int irq) { @@ -281,11 +281,11 @@ static unsigned int startup_bridge_irq(struct irq_data *d) device |= (pin << (pin*3)); bridge->b_int_device = device; - bridge->b_wid_tflush; + bridge->b_wid_tflush; intr_connect_level(cpu, swlevel); - return 0; /* Never anything pending. */ + return 0; /* Never anything pending. */ } /* Shutdown one of the (PCI ...) IRQs routes over a bridge. */ diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index cd8fcab..3505d08 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -31,8 +31,8 @@ #include <asm/sn/sn_private.h> -#define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) -#define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) +#define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) +#define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) struct node_data *__node_data[MAX_COMPACT_NODES]; @@ -43,7 +43,7 @@ static int fine_mode; static int is_fine_dirmode(void) { return (((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK) - >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE); + >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE); } static hubreg_t get_region(cnodeid_t cnode) @@ -66,7 +66,7 @@ static void gen_region_mask(hubreg_t *region_mask) } } -#define rou_rflag rou_flags +#define rou_rflag rou_flags static int router_distance; @@ -412,7 +412,7 @@ static void __init node_mem_init(cnodeid_t node) slot_freepfn += PFN_UP(sizeof(struct pglist_data) + sizeof(struct hub_data)); - bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn, + bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn, start_pfn, end_pfn); free_bootmem_with_active_regions(node, end_pfn); reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT, @@ -422,7 +422,7 @@ static void __init node_mem_init(cnodeid_t node) } /* - * A node with nothing. We use it to avoid any special casing in + * A node with nothing. We use it to avoid any special casing in * cpumask_of_node */ static struct node_data null_node = { diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c index 005c29e..a2358b4 100644 --- a/arch/mips/sgi-ip27/ip27-nmi.c +++ b/arch/mips/sgi-ip27/ip27-nmi.c @@ -54,7 +54,7 @@ void install_cpu_nmi_handler(int slice) void nmi_cpu_eframe_save(nasid_t nasid, int slice) { struct reg_struct *nr; - int i; + int i; /* Get the pointer to the current cpu's register set. */ nr = (struct reg_struct *) @@ -86,12 +86,12 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice) printk("%s\n", print_tainted()); printk("ErrEPC: %016lx %pS\n", nr->error_epc, (void *) nr->error_epc); printk("ra : %016lx %pS\n", nr->gpr[31], (void *) nr->gpr[31]); - printk("Status: %08lx ", nr->sr); + printk("Status: %08lx ", nr->sr); if (nr->sr & ST0_KX) printk("KX "); if (nr->sr & ST0_SX) - printk("SX "); + printk("SX "); if (nr->sr & ST0_UX) printk("UX "); diff --git a/arch/mips/sgi-ip27/ip27-reset.c b/arch/mips/sgi-ip27/ip27-reset.c index f347bc6..ac37e54 100644 --- a/arch/mips/sgi-ip27/ip27-reset.c +++ b/arch/mips/sgi-ip27/ip27-reset.c @@ -29,7 +29,7 @@ void machine_restart(char *command) __attribute__((noreturn)); void machine_halt(void) __attribute__((noreturn)); void machine_power_off(void) __attribute__((noreturn)); -#define noreturn while(1); /* Silence gcc. */ +#define noreturn while(1); /* Silence gcc. */ /* XXX How to pass the reboot command to the firmware??? */ static void ip27_machine_restart(char *command) diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index 735b43b..f946381 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -191,7 +191,7 @@ static void __init ip27_cpus_done(void) } /* - * Launch a slave into smp_bootstrap(). It doesn't take an argument, and we + * Launch a slave into smp_bootstrap(). It doesn't take an argument, and we * set sp to the kernel stack of the newly created idle process, gp to the proc * struct so that current_thread_info() will work. */ @@ -219,7 +219,7 @@ static void __init ip27_smp_setup(void) /* * Assumption to be fixed: we're always booted on logical / physical - * processor 0. While we're always running on logical processor 0 + * processor 0. While we're always running on logical processor 0 * this still means this is physical processor zero; it might for * example be disabled in the firmware. */ diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 13cfeab..fff58ac1 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -117,8 +117,8 @@ void __cpuinit hub_rt_clock_event_init(void) cd->name = name; cd->features = CLOCK_EVT_FEAT_ONESHOT; clockevent_set_clock(cd, CYCLES_PER_SEC); - cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd); - cd->min_delta_ns = clockevent_delta2ns(0x300, cd); + cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0x300, cd); cd->rating = 200; cd->irq = irq; cd->cpumask = cpumask_of(cpu); @@ -153,7 +153,7 @@ static cycle_t hub_rt_read(struct clocksource *cs) struct clocksource hub_rt_clocksource = { .name = "HUB-RT", - .rating = 200, + .rating = 200, .read = hub_rt_read, .mask = CLOCKSOURCE_MASK(52), .flags = CLOCK_SOURCE_IS_CONTINUOUS, diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c index 5e871e7..a4df7d0 100644 --- a/arch/mips/sgi-ip27/ip27-xtalk.c +++ b/arch/mips/sgi-ip27/ip27-xtalk.c @@ -17,15 +17,15 @@ #include <asm/xtalk/xtalk.h> -#define XBOW_WIDGET_PART_NUM 0x0 -#define XXBOW_WIDGET_PART_NUM 0xd000 /* Xbow in Xbridge */ -#define BASE_XBOW_PORT 8 /* Lowest external port */ +#define XBOW_WIDGET_PART_NUM 0x0 +#define XXBOW_WIDGET_PART_NUM 0xd000 /* Xbow in Xbridge */ +#define BASE_XBOW_PORT 8 /* Lowest external port */ extern int bridge_probe(nasid_t nasid, int widget, int masterwid); static int __cpuinit probe_one_port(nasid_t nasid, int widget, int masterwid) { - widgetreg_t widget_id; + widgetreg_t widget_id; xwidget_part_num_t partnum; widget_id = *(volatile widgetreg_t *) @@ -102,10 +102,10 @@ static int __cpuinit xbow_probe(nasid_t nasid) void __cpuinit xtalk_probe_node(cnodeid_t nid) { - volatile u64 hubreg; - nasid_t nasid; + volatile u64 hubreg; + nasid_t nasid; xwidget_part_num_t partnum; - widgetreg_t widget_id; + widgetreg_t widget_id; nasid = COMPACT_TO_NASID_NODEID(nid); hubreg = REMOTE_HUB_L(nasid, IIO_LLP_CSR); @@ -115,7 +115,7 @@ void __cpuinit xtalk_probe_node(cnodeid_t nid) return; widget_id = *(volatile widgetreg_t *) - (RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID); + (RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID); partnum = XWIDGET_PART_NUM(widget_id); printk(KERN_INFO "Cpu %d, Nasid 0x%x: partnum 0x%x is ", diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index e7d5054..e0c7d9e 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -173,7 +173,7 @@ static struct irq_chip crime_edge_interrupt = { /* * This is for MACE PCI interrupts. We can decrease bus traffic by masking - * as close to the source as possible. This also means we can take the + * as close to the source as possible. This also means we can take the * next chunk of the CRIME register in one piece. */ @@ -271,11 +271,11 @@ static void disable_maceisa_irq(struct irq_data *d) unsigned int crime_int = 0; maceisa_mask &= ~(1 << (d->irq - MACEISA_AUDIO_SW_IRQ)); - if (!(maceisa_mask & MACEISA_AUDIO_INT)) + if (!(maceisa_mask & MACEISA_AUDIO_INT)) crime_int |= MACE_AUDIO_INT; - if (!(maceisa_mask & MACEISA_MISC_INT)) + if (!(maceisa_mask & MACEISA_MISC_INT)) crime_int |= MACE_MISC_INT; - if (!(maceisa_mask & MACEISA_SUPERIO_INT)) + if (!(maceisa_mask & MACEISA_SUPERIO_INT)) crime_int |= MACE_SUPERIO_INT; crime_mask &= ~crime_int; crime->imask = crime_mask; diff --git a/arch/mips/sibyte/Platform b/arch/mips/sibyte/Platform index 911dfe3..d03a075 100644 --- a/arch/mips/sibyte/Platform +++ b/arch/mips/sibyte/Platform @@ -9,7 +9,7 @@ platform-$(CONFIG_SIBYTE_BCM1x80) += sibyte/ # # Sibyte SB1250 / BCM1480 family of SOCs # -cflags-$(CONFIG_SIBYTE_BCM112X) += \ +cflags-$(CONFIG_SIBYTE_BCM112X) += \ -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL @@ -18,11 +18,11 @@ cflags-$(CONFIG_SIBYTE_SB1250) += \ -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL -cflags-$(CONFIG_SIBYTE_BCM1x55) += \ +cflags-$(CONFIG_SIBYTE_BCM1x55) += \ -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL -cflags-$(CONFIG_SIBYTE_BCM1x80) += \ +cflags-$(CONFIG_SIBYTE_BCM1x80) += \ -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 215713e..09d6e16 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -283,10 +283,10 @@ void __init arch_init_irq(void) for (cpu = 0; cpu < 4; cpu++) { __raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (K_BCM1480_INT_MBOX_0_0 << 3))); - } + } - /* Clear the mailboxes. The firmware may leave them dirty */ + /* Clear the mailboxes. The firmware may leave them dirty */ for (cpu = 0; cpu < 4; cpu++) { __raw_writeq(0xffffffffffffffffULL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU))); @@ -307,7 +307,7 @@ void __init arch_init_irq(void) /* * Note that the timer interrupts are also mapped, but this is - * done in bcm1480_time_init(). Also, the profiling driver + * done in bcm1480_time_init(). Also, the profiling driver * does its own management of IP7. */ @@ -325,7 +325,7 @@ static inline void dispatch_ip2(void) /* * Default...we've hit an IP[2] interrupt, which means we've got to - * check the 1480 interrupt registers to figure out what to do. Need + * check the 1480 interrupt registers to figure out what to do. Need * to detect which CPU we're on, now that smp_affinity is supported. */ base = A_BCM1480_IMR_MAPPER(cpu); diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c index 6343011..588e180 100644 --- a/arch/mips/sibyte/common/cfe.c +++ b/arch/mips/sibyte/common/cfe.c @@ -127,8 +127,8 @@ static __init void prom_meminit(void) if ((initrd_pstart > addr) && (initrd_pstart < (addr + size))) { add_memory_region(addr, - initrd_pstart - addr, - BOOT_MEM_RAM); + initrd_pstart - addr, + BOOT_MEM_RAM); rd_flag = 1; } if ((initrd_pend > addr) && @@ -195,7 +195,7 @@ static int __init initrd_setup(char *str) /* *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>" - * e.g. initrd=3abfd@80010000. This is set up by the loader. + * e.g. initrd=3abfd@80010000. This is set up by the loader. */ for (tmp = str; *tmp != '@'; tmp++) { if (!*tmp) { @@ -244,7 +244,7 @@ void __init prom_init(void) int *prom_vec = (int *) fw_arg3; _machine_restart = cfe_linux_restart; - _machine_halt = cfe_linux_halt; + _machine_halt = cfe_linux_halt; pm_power_off = cfe_linux_halt; /* @@ -299,7 +299,7 @@ void __init prom_init(void) #ifdef CONFIG_BLK_DEV_INITRD { char *ptr; - /* Need to find out early whether we've got an initrd. So scan + /* Need to find out early whether we've got an initrd. So scan the list looking now */ for (ptr = arcs_cmdline; *ptr; ptr++) { while (*ptr == ' ') { diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c index e8c4538..2188b39 100644 --- a/arch/mips/sibyte/common/sb_tbprof.c +++ b/arch/mips/sibyte/common/sb_tbprof.c @@ -152,7 +152,7 @@ static u64 tb_period; static void arm_tb(void) { - u64 scdperfcnt; + u64 scdperfcnt; u64 next = (1ULL << 40) - tb_period; u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL; @@ -257,8 +257,8 @@ static irqreturn_t sbprof_pc_intr(int irq, void *dev_id) /* * Requires: Already called zclk_timer_init with a value that won't - * saturate 40 bits. No subsequent use of SCD performance counters - * or trace buffer. + * saturate 40 bits. No subsequent use of SCD performance counters + * or trace buffer. */ static int sbprof_zbprof_start(struct file *filp) @@ -288,8 +288,8 @@ static int sbprof_zbprof_start(struct file *filp) /* * We grab this interrupt to prevent others from trying to use - * it, even though we don't want to service the interrupts - * (they only feed into the trace-on-interrupt mechanism) + * it, even though we don't want to service the interrupts + * (they only feed into the trace-on-interrupt mechanism) */ if (request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) { free_irq(K_INT_TRACE_FREEZE, &sbp); @@ -298,7 +298,7 @@ static int sbprof_zbprof_start(struct file *filp) /* * I need the core to mask these, but the interrupt mapper to - * pass them through. I am exploiting my knowledge that + * pass them through. I am exploiting my knowledge that * cp0_status masks out IP[5]. krw */ #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) @@ -328,7 +328,7 @@ static int sbprof_zbprof_start(struct file *filp) __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3)); /* Initialize Trace Event 0-7 */ - /* when interrupt */ + /* when interrupt */ __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2)); @@ -479,7 +479,7 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf, return err; } pr_debug(DEVNAME ": read from sample %d, %d bytes\n", - cur_sample, cur_count); + cur_sample, cur_count); size -= cur_count; sample_left -= cur_count; if (!sample_left) { @@ -540,7 +540,7 @@ static const struct file_operations sbprof_tb_fops = { .open = sbprof_tb_open, .release = sbprof_tb_release, .read = sbprof_tb_read, - .unlocked_ioctl = sbprof_tb_ioctl, + .unlocked_ioctl = sbprof_tb_ioctl, .compat_ioctl = sbprof_tb_ioctl, .mmap = NULL, .llseek = default_llseek, diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c index 86e6e54..e651105 100644 --- a/arch/mips/sibyte/sb1250/bus_watcher.c +++ b/arch/mips/sibyte/sb1250/bus_watcher.c @@ -71,7 +71,7 @@ static void print_summary(uint32_t status, uint32_t l2_err, * already been destructively read out of the registers. * * notes: this is currently used by the cache error handler - * should provide locking against the interrupt handler + * should provide locking against the interrupt handler */ void check_bus_watcher(void) { @@ -119,7 +119,7 @@ static int bw_print_buffer(char *page, struct bw_stats_struct *stats) (int)G_SCD_BERR_RID(stats->status), (int)G_SCD_BERR_DCODE(stats->status)); /* XXXKW indicate multiple errors between printings, or stats - collection (or both)? */ + collection (or both)? */ if (stats->status & M_SCD_BERR_MULTERRS) len += sprintf(page+len, "Multiple errors observed since last check.\n"); if (stats->status_printed) { @@ -168,7 +168,7 @@ static void create_proc_decoder(struct bw_stats_struct *stats) * sibyte_bw_int - handle bus watcher interrupts and accumulate counts * * notes: possible re-entry due to multiple sources - * should check/indicate saturation + * should check/indicate saturation */ static irqreturn_t sibyte_bw_int(int irq, void *data) { diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 340aaf6..fca0cdb 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -264,7 +264,7 @@ void __init arch_init_irq(void) IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + (K_INT_MBOX_0 << 3))); - /* Clear the mailboxes. The firmware may leave them dirty */ + /* Clear the mailboxes. The firmware may leave them dirty */ __raw_writeq(0xffffffffffffffffULL, IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU))); __raw_writeq(0xffffffffffffffffULL, @@ -277,7 +277,7 @@ void __init arch_init_irq(void) /* * Note that the timer interrupts are also mapped, but this is - * done in sb1250_time_init(). Also, the profiling driver + * done in sb1250_time_init(). Also, the profiling driver * does its own management of IP7. */ @@ -294,7 +294,7 @@ static inline void dispatch_ip2(void) /* * Default...we've hit an IP[2] interrupt, which means we've got to - * check the 1250 interrupt registers to figure out what to do. Need + * check the 1250 interrupt registers to figure out what to do. Need * to detect which CPU we're on, now that smp_affinity is supported. */ mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu, @@ -323,7 +323,7 @@ asmlinkage void plat_irq_dispatch(void) if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */ do_IRQ(MIPS_CPU_IRQ_BASE + 7); else if (pending & CAUSEF_IP4) - do_IRQ(K_INT_TIMER_0 + cpu); /* sb1250_timer_interrupt() */ + do_IRQ(K_INT_TIMER_0 + cpu); /* sb1250_timer_interrupt() */ #ifdef CONFIG_SMP else if (pending & CAUSEF_IP3) diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c index 92da315..a14bd4c 100644 --- a/arch/mips/sibyte/sb1250/setup.c +++ b/arch/mips/sibyte/sb1250/setup.c @@ -203,8 +203,8 @@ void __init sb1250_setup(void) case K_SYS_REVISION_BCM1250_PASS1: #ifndef CONFIG_SB1_PASS_1_WORKAROUNDS printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, " - "and the kernel doesn't have the proper " - "workarounds compiled in. @@@@\n"); + "and the kernel doesn't have the proper " + "workarounds compiled in. @@@@\n"); bad_config = 1; #endif break; @@ -213,28 +213,28 @@ void __init sb1250_setup(void) #if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \ !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) printk("@@@@ This is a BCM1250 A3-A10 board, and the " - "kernel doesn't have the proper workarounds " - "compiled in. @@@@\n"); + "kernel doesn't have the proper workarounds " + "compiled in. @@@@\n"); bad_config = 1; #endif #ifdef CONFIG_CPU_HAS_PREFETCH printk("@@@@ Prefetches may be enabled in this kernel, " - "but are buggy on this board. @@@@\n"); + "but are buggy on this board. @@@@\n"); bad_config = 1; #endif break; case K_SYS_REVISION_BCM1250_PASS2_2: #ifndef CONFIG_SB1_PASS_2_WORKAROUNDS printk("@@@@ This is a BCM1250 B1/B2. board, and the " - "kernel doesn't have the proper workarounds " - "compiled in. @@@@\n"); + "kernel doesn't have the proper workarounds " + "compiled in. @@@@\n"); bad_config = 1; #endif #if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \ !defined(CONFIG_CPU_HAS_PREFETCH) printk("@@@@ This is a BCM1250 B1/B2, but the kernel is " - "conservatively configured for an 'A' stepping. " - "@@@@\n"); + "conservatively configured for an 'A' stepping. " + "@@@@\n"); #endif break; default: diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c index 0973352..9480c14 100644 --- a/arch/mips/sibyte/swarm/platform.c +++ b/arch/mips/sibyte/swarm/platform.c @@ -13,7 +13,7 @@ #define DRV_NAME "pata-swarm" -#define SWARM_IDE_SHIFT 5 +#define SWARM_IDE_SHIFT 5 #define SWARM_IDE_BASE 0x1f0 #define SWARM_IDE_CTRL 0x3f6 @@ -123,7 +123,7 @@ static int __init sb1250_device_init(void) case K_SYS_SOC_TYPE_BCM1120: case K_SYS_SOC_TYPE_BCM1125: case K_SYS_SOC_TYPE_BCM1125H: - case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */ + case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */ ret = platform_add_devices(sb1250_devs, 2); break; case K_SYS_SOC_TYPE_BCM1x55: diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c index 4438b21..178a824 100644 --- a/arch/mips/sibyte/swarm/rtc_xicor1241.c +++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c @@ -4,8 +4,8 @@ * Copyright (C) 2002 MontaVista Software Inc. * Author: jsun@mvista.com or jsun@junsun.net * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ @@ -28,15 +28,15 @@ * Register bits */ -#define X1241REG_SR_BAT 0x80 /* currently on battery power */ +#define X1241REG_SR_BAT 0x80 /* currently on battery power */ #define X1241REG_SR_RWEL 0x04 /* r/w latch is enabled, can write RTC */ #define X1241REG_SR_WEL 0x02 /* r/w latch is unlocked, can enable r/w now */ #define X1241REG_SR_RTCF 0x01 /* clock failed */ #define X1241REG_BL_BP2 0x80 /* block protect 2 */ #define X1241REG_BL_BP1 0x40 /* block protect 1 */ #define X1241REG_BL_BP0 0x20 /* block protect 0 */ -#define X1241REG_BL_WD1 0x10 -#define X1241REG_BL_WD0 0x08 +#define X1241REG_BL_WD1 0x10 +#define X1241REG_BL_WD0 0x08 #define X1241REG_HR_MIL 0x80 /* military time format */ /* @@ -61,50 +61,50 @@ static int xicor_read(uint8_t addr) { - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA)); __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, SMB_CSR(R_SMB_START)); - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, SMB_CSR(R_SMB_START)); - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; - if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { - /* Clear error bit by writing a 1 */ - __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); - return -1; - } + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + /* Clear error bit by writing a 1 */ + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + return -1; + } return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); } static int xicor_write(uint8_t addr, int b) { - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; __raw_writeq(addr, SMB_CSR(R_SMB_CMD)); __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, SMB_CSR(R_SMB_START)); - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; - if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { - /* Clear error bit by writing a 1 */ - __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); - return -1; - } else { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + /* Clear error bit by writing a 1 */ + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + return -1; + } else { return 0; } } diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index e05ad4d..dd0ab98 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -41,17 +41,17 @@ static struct platform_device a20r_serial8250_device = { }; static struct resource a20r_ds1216_rsrc[] = { - { - .start = 0x1c081ffc, - .end = 0x1c081fff, - .flags = IORESOURCE_MEM - } + { + .start = 0x1c081ffc, + .end = 0x1c081fff, + .flags = IORESOURCE_MEM + } }; static struct platform_device a20r_ds1216_device = { - .name = "rtc-ds1216", - .num_resources = ARRAY_SIZE(a20r_ds1216_rsrc), - .resource = a20r_ds1216_rsrc + .name = "rtc-ds1216", + .num_resources = ARRAY_SIZE(a20r_ds1216_rsrc), + .resource = a20r_ds1216_rsrc }; static struct resource snirm_82596_rsrc[] = { @@ -76,14 +76,14 @@ static struct resource snirm_82596_rsrc[] = { .flags = IORESOURCE_IRQ }, { - .flags = 0x01 /* 16bit mpu port access */ + .flags = 0x01 /* 16bit mpu port access */ } }; static struct platform_device snirm_82596_pdev = { - .name = "snirm_82596", - .num_resources = ARRAY_SIZE(snirm_82596_rsrc), - .resource = snirm_82596_rsrc + .name = "snirm_82596", + .num_resources = ARRAY_SIZE(snirm_82596_rsrc), + .resource = snirm_82596_rsrc }; static struct resource snirm_53c710_rsrc[] = { @@ -100,9 +100,9 @@ static struct resource snirm_53c710_rsrc[] = { }; static struct platform_device snirm_53c710_pdev = { - .name = "snirm_53c710", - .num_resources = ARRAY_SIZE(snirm_53c710_rsrc), - .resource = snirm_53c710_rsrc + .name = "snirm_53c710", + .num_resources = ARRAY_SIZE(snirm_53c710_rsrc), + .resource = snirm_53c710_rsrc }; static struct resource sc26xx_rsrc[] = { @@ -171,7 +171,7 @@ static u32 a20r_ack_hwint(void) " addiu %1, -1 \n" " sw $1, 0(%0) \n" " sync \n" - ".set pop \n" + ".set pop \n" : : "Jr" (PCIMT_UCONF), "Jr" (0xbc000000)); write_c0_status(status); @@ -236,13 +236,13 @@ static int __init snirm_a20r_setup_devinit(void) switch (sni_brd_type) { case SNI_BRD_TOWER_OASIC: case SNI_BRD_MINITOWER: - platform_device_register(&snirm_82596_pdev); - platform_device_register(&snirm_53c710_pdev); - platform_device_register(&sc26xx_pdev); - platform_device_register(&a20r_serial8250_device); - platform_device_register(&a20r_ds1216_device); + platform_device_register(&snirm_82596_pdev); + platform_device_register(&snirm_53c710_pdev); + platform_device_register(&sc26xx_pdev); + platform_device_register(&a20r_serial8250_device); + platform_device_register(&a20r_ds1216_device); sni_eisa_root_init(); - break; + break; } return 0; } diff --git a/arch/mips/sni/eisa.c b/arch/mips/sni/eisa.c index 6827feb..179b5d5 100644 --- a/arch/mips/sni/eisa.c +++ b/arch/mips/sni/eisa.c @@ -22,7 +22,7 @@ static struct platform_device eisa_root_dev = { }; static struct eisa_root_device eisa_bus_root = { - .dev = &eisa_root_dev.dev, + .dev = &eisa_root_dev.dev, .bus_base_addr = 0, .res = &ioport_resource, .slots = EISA_MAX_SLOTS, diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c index 5a4ec75..ac61b90 100644 --- a/arch/mips/sni/irq.c +++ b/arch/mips/sni/irq.c @@ -58,25 +58,25 @@ void __init arch_init_irq(void) case SNI_BRD_10NEW: case SNI_BRD_TOWER_OASIC: case SNI_BRD_MINITOWER: - sni_a20r_irq_init(); - break; + sni_a20r_irq_init(); + break; case SNI_BRD_PCI_TOWER: - sni_pcit_irq_init(); - break; + sni_pcit_irq_init(); + break; case SNI_BRD_PCI_TOWER_CPLUS: - sni_pcit_cplus_irq_init(); - break; + sni_pcit_cplus_irq_init(); + break; case SNI_BRD_RM200: - sni_rm200_irq_init(); - break; + sni_rm200_irq_init(); + break; case SNI_BRD_PCI_MTOWER: case SNI_BRD_PCI_DESKTOP: case SNI_BRD_PCI_MTOWER_CPLUS: - sni_pcimt_irq_init(); - break; + sni_pcimt_irq_init(); + break; } } diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index cdb1417..cec4b8c 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -60,7 +60,7 @@ static inline void sni_pcimt_detect(void) p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300"); if ((csmsr & 0x80) == 0) p += sprintf(p, ", board revision %s", - (csmsr & 0x20) ? "D" : "C"); + (csmsr & 0x20) ? "D" : "C"); asic = csmsr & 0x80; asic = (csmsr & 0x08) ? asic : !asic; p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1"); @@ -91,22 +91,22 @@ static struct platform_device pcimt_serial8250_device = { }; static struct resource pcimt_cmos_rsrc[] = { - { - .start = 0x70, - .end = 0x71, - .flags = IORESOURCE_IO - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_IRQ - } + { + .start = 0x70, + .end = 0x71, + .flags = IORESOURCE_IO + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_IRQ + } }; static struct platform_device pcimt_cmos_device = { - .name = "rtc_cmos", - .num_resources = ARRAY_SIZE(pcimt_cmos_rsrc), - .resource = pcimt_cmos_rsrc + .name = "rtc_cmos", + .num_resources = ARRAY_SIZE(pcimt_cmos_rsrc), + .resource = pcimt_cmos_rsrc }; @@ -191,7 +191,7 @@ static struct pci_controller sni_controller = { .mem_offset = 0x00000000UL, .io_resource = &sni_io_resource, .io_offset = 0x00000000UL, - .io_map_base = SNI_PORT_BASE + .io_map_base = SNI_PORT_BASE }; static void enable_pcimt_irq(struct irq_data *d) @@ -319,9 +319,9 @@ static int __init snirm_pcimt_setup_devinit(void) case SNI_BRD_PCI_MTOWER: case SNI_BRD_PCI_DESKTOP: case SNI_BRD_PCI_MTOWER_CPLUS: - platform_device_register(&pcimt_serial8250_device); - platform_device_register(&pcimt_cmos_device); - break; + platform_device_register(&pcimt_serial8250_device); + platform_device_register(&pcimt_cmos_device); + break; } return 0; diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c index b524637..7cddd03 100644 --- a/arch/mips/sni/pcit.c +++ b/arch/mips/sni/pcit.c @@ -59,22 +59,22 @@ static struct platform_device pcit_cplus_serial8250_device = { }; static struct resource pcit_cmos_rsrc[] = { - { - .start = 0x70, - .end = 0x71, - .flags = IORESOURCE_IO - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_IRQ - } + { + .start = 0x70, + .end = 0x71, + .flags = IORESOURCE_IO + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_IRQ + } }; static struct platform_device pcit_cmos_device = { - .name = "rtc_cmos", - .num_resources = ARRAY_SIZE(pcit_cmos_rsrc), - .resource = pcit_cmos_rsrc + .name = "rtc_cmos", + .num_resources = ARRAY_SIZE(pcit_cmos_rsrc), + .resource = pcit_cmos_rsrc }; static struct platform_device pcit_pcspeaker_pdev = { @@ -153,7 +153,7 @@ static struct pci_controller sni_pcit_controller = { .mem_offset = 0x00000000UL, .io_resource = &sni_io_resource, .io_offset = 0x00000000UL, - .io_map_base = SNI_PORT_BASE + .io_map_base = SNI_PORT_BASE }; static void enable_pcit_irq(struct irq_data *d) @@ -272,16 +272,16 @@ static int __init snirm_pcit_setup_devinit(void) { switch (sni_brd_type) { case SNI_BRD_PCI_TOWER: - platform_device_register(&pcit_serial8250_device); - platform_device_register(&pcit_cmos_device); + platform_device_register(&pcit_serial8250_device); + platform_device_register(&pcit_cmos_device); platform_device_register(&pcit_pcspeaker_pdev); - break; + break; case SNI_BRD_PCI_TOWER_CPLUS: - platform_device_register(&pcit_cplus_serial8250_device); - platform_device_register(&pcit_cmos_device); + platform_device_register(&pcit_cplus_serial8250_device); + platform_device_register(&pcit_cmos_device); platform_device_register(&pcit_pcspeaker_pdev); - break; + break; } return 0; } diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index 3ab5b5d..a046b30 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -48,17 +48,17 @@ static struct platform_device rm200_serial8250_device = { }; static struct resource rm200_ds1216_rsrc[] = { - { - .start = 0x1cd41ffc, - .end = 0x1cd41fff, - .flags = IORESOURCE_MEM - } + { + .start = 0x1cd41ffc, + .end = 0x1cd41fff, + .flags = IORESOURCE_MEM + } }; static struct platform_device rm200_ds1216_device = { - .name = "rtc-ds1216", - .num_resources = ARRAY_SIZE(rm200_ds1216_rsrc), - .resource = rm200_ds1216_rsrc + .name = "rtc-ds1216", + .num_resources = ARRAY_SIZE(rm200_ds1216_rsrc), + .resource = rm200_ds1216_rsrc }; static struct resource snirm_82596_rm200_rsrc[] = { @@ -88,9 +88,9 @@ static struct resource snirm_82596_rm200_rsrc[] = { }; static struct platform_device snirm_82596_rm200_pdev = { - .name = "snirm_82596", - .num_resources = ARRAY_SIZE(snirm_82596_rm200_rsrc), - .resource = snirm_82596_rm200_rsrc + .name = "snirm_82596", + .num_resources = ARRAY_SIZE(snirm_82596_rm200_rsrc), + .resource = snirm_82596_rm200_rsrc }; static struct resource snirm_53c710_rm200_rsrc[] = { @@ -107,9 +107,9 @@ static struct resource snirm_53c710_rm200_rsrc[] = { }; static struct platform_device snirm_53c710_rm200_pdev = { - .name = "snirm_53c710", - .num_resources = ARRAY_SIZE(snirm_53c710_rm200_rsrc), - .resource = snirm_53c710_rm200_rsrc + .name = "snirm_53c710", + .num_resources = ARRAY_SIZE(snirm_53c710_rm200_rsrc), + .resource = snirm_53c710_rm200_rsrc }; static int __init snirm_setup_devinit(void) @@ -134,9 +134,9 @@ device_initcall(snirm_setup_devinit); */ static DEFINE_RAW_SPINLOCK(sni_rm200_i8259A_lock); -#define PIC_CMD 0x00 -#define PIC_IMR 0x01 -#define PIC_ISR PIC_CMD +#define PIC_CMD 0x00 +#define PIC_IMR 0x01 +#define PIC_ISR PIC_CMD #define PIC_POLL PIC_ISR #define PIC_OCW3 PIC_ISR @@ -421,8 +421,8 @@ void __init sni_rm200_i8259_irqs(void) } -#define SNI_RM200_INT_STAT_REG CKSEG1ADDR(0xbc000000) -#define SNI_RM200_INT_ENA_REG CKSEG1ADDR(0xbc080000) +#define SNI_RM200_INT_STAT_REG CKSEG1ADDR(0xbc000000) +#define SNI_RM200_INT_ENA_REG CKSEG1ADDR(0xbc080000) #define SNI_RM200_INT_START 24 #define SNI_RM200_INT_END 28 diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index 2e9c283..5b09b35 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -204,23 +204,23 @@ void __init plat_mem_setup(void) case SNI_BRD_10NEW: case SNI_BRD_TOWER_OASIC: case SNI_BRD_MINITOWER: - sni_a20r_init(); - break; + sni_a20r_init(); + break; case SNI_BRD_PCI_TOWER: case SNI_BRD_PCI_TOWER_CPLUS: - sni_pcit_init(); + sni_pcit_init(); break; case SNI_BRD_RM200: - sni_rm200_init(); - break; + sni_rm200_init(); + break; case SNI_BRD_PCI_MTOWER: case SNI_BRD_PCI_DESKTOP: case SNI_BRD_PCI_MTOWER_CPLUS: - sni_pcimt_init(); - break; + sni_pcimt_init(); + break; } _machine_restart = sni_machine_restart; @@ -247,16 +247,16 @@ static void quirk_cirrus_ram_size(struct pci_dev *dev) */ pci_read_config_word(dev, PCI_COMMAND, &cmd); if ((cmd & (PCI_COMMAND_IO|PCI_COMMAND_MEMORY)) - == (PCI_COMMAND_IO|PCI_COMMAND_MEMORY)) { - vga_wseq(NULL, CL_SEQR6, 0x12); /* unlock all extension registers */ + == (PCI_COMMAND_IO|PCI_COMMAND_MEMORY)) { + vga_wseq(NULL, CL_SEQR6, 0x12); /* unlock all extension registers */ vga_wseq(NULL, CL_SEQRF, 0x18); } } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5434_8, - quirk_cirrus_ram_size); + quirk_cirrus_ram_size); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5436, - quirk_cirrus_ram_size); + quirk_cirrus_ram_size); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446, - quirk_cirrus_ram_size); + quirk_cirrus_ram_size); #endif diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index 494c9e7..cf8ec56 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -10,12 +10,12 @@ #include <asm/time.h> #include <asm-generic/rtc.h> -#define SNI_CLOCK_TICK_RATE 3686400 -#define SNI_COUNTER2_DIV 64 -#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ) +#define SNI_CLOCK_TICK_RATE 3686400 +#define SNI_COUNTER2_DIV 64 +#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ) static void a20r_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) + struct clock_event_device *evt) { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: @@ -33,14 +33,14 @@ static void a20r_set_mode(enum clock_event_mode mode, *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8; wmb(); - break; - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - break; - case CLOCK_EVT_MODE_RESUME: - break; - } + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + break; + case CLOCK_EVT_MODE_RESUME: + break; + } } static struct clock_event_device a20r_clockevent_device = { @@ -82,15 +82,15 @@ static void __init sni_a20r_timer_setup(void) struct irqaction *action = &a20r_irqaction; unsigned int cpu = smp_processor_id(); - cd->cpumask = cpumask_of(cpu); + cd->cpumask = cpumask_of(cpu); clockevents_register_device(cd); action->dev_id = cd; setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction); } -#define SNI_8254_TICK_RATE 1193182UL +#define SNI_8254_TICK_RATE 1193182UL -#define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255) +#define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255) static __init unsigned long dosample(void) { diff --git a/arch/mips/txx9/Platform b/arch/mips/txx9/Platform index a801abb..a176d1fd 100644 --- a/arch/mips/txx9/Platform +++ b/arch/mips/txx9/Platform @@ -6,5 +6,5 @@ cflags-$(CONFIG_MACH_TX39XX) += \ cflags-$(CONFIG_MACH_TX49XX) += \ -I$(srctree)/arch/mips/include/asm/mach-tx49xx -load-$(CONFIG_MACH_TX39XX) += 0xffffffff80050000 -load-$(CONFIG_MACH_TX49XX) += 0xffffffff80100000 +load-$(CONFIG_MACH_TX39XX) += 0xffffffff80050000 +load-$(CONFIG_MACH_TX49XX) += 0xffffffff80100000 diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c index 7e3ac57..ed8e702 100644 --- a/arch/mips/txx9/generic/irq_tx4927.c +++ b/arch/mips/txx9/generic/irq_tx4927.c @@ -2,7 +2,7 @@ * Common tx4927 irq handler * * Author: MontaVista Software, Inc. - * source@mvista.com + * source@mvista.com * * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your diff --git a/arch/mips/txx9/generic/irq_tx4939.c b/arch/mips/txx9/generic/irq_tx4939.c index 6b067db..0d7267e 100644 --- a/arch/mips/txx9/generic/irq_tx4939.c +++ b/arch/mips/txx9/generic/irq_tx4939.c @@ -5,8 +5,8 @@ * * Copyright 2001, 2003-2005 MontaVista Software Inc. * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * source@mvista.com + * ahennessy@mvista.com + * source@mvista.com * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation * * This file is subject to the terms and conditions of the GNU General Public diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c index 70f9626..deea2ce 100644 --- a/arch/mips/txx9/generic/mem_tx4927.c +++ b/arch/mips/txx9/generic/mem_tx4927.c @@ -2,7 +2,7 @@ * common tx4927 memory interface * * Author: MontaVista Software, Inc. - * source@mvista.com + * source@mvista.com * * Copyright 2001-2002 MontaVista Software Inc. * diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index ce8f8b9..2871327 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -2,7 +2,7 @@ * linux/arch/mips/txx9/pci.c * * Based on linux/arch/mips/txx9/rbtx4927/setup.c, - * linux/arch/mips/txx9/rbtx4938/setup.c, + * linux/arch/mips/txx9/rbtx4938/setup.c, * and RBTX49xx patch from CELF patch archive. * * Copyright 2001-2005 MontaVista Software Inc. @@ -107,7 +107,7 @@ int txx9_pci_mem_high __initdata; /* * allocate pci_controller and resources. - * mem_base, io_base: physical address. 0 for auto assignment. + * mem_base, io_base: physical address. 0 for auto assignment. * mem_size and io_size means max size on auto assignment. * pcic must be &txx9_primary_pcic or NULL. */ diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 560fe899..5524f2c 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -513,19 +513,19 @@ void __init txx9_sio_init(unsigned long baseaddr, int irq, } #ifdef CONFIG_EARLY_PRINTK -static void __init null_prom_putchar(char c) +static void null_prom_putchar(char c) { } -void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar; +void (*txx9_prom_putchar)(char c) = null_prom_putchar; -void __init prom_putchar(char c) +void prom_putchar(char c) { txx9_prom_putchar(c); } static void __iomem *early_txx9_sio_port; -static void __init early_txx9_sio_putchar(char c) +static void early_txx9_sio_putchar(char c) { #define TXX9_SICISR 0x0c #define TXX9_SITFIFO 0x1c diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c index 9505d58..110e05c 100644 --- a/arch/mips/txx9/generic/setup_tx3927.c +++ b/arch/mips/txx9/generic/setup_tx3927.c @@ -132,6 +132,6 @@ void __init tx3927_mtd_init(int ch) unsigned long size = txx9_ce_res[ch].end - start + 1; if (!(tx3927_romcptr->cr[ch] & 0x8)) - return; /* disabled */ + return; /* disabled */ txx9_physmap_flash_init(ch, start, size, &pdata); } diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index 3418b2a..e714d6c 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -250,7 +250,7 @@ void __init tx4927_mtd_init(int ch) unsigned long size = txx9_ce_res[ch].end - start + 1; if (!(TX4927_EBUSC_CR(ch) & 0x8)) - return; /* disabled */ + return; /* disabled */ txx9_physmap_flash_init(ch, start, size, &pdata); } diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index eb20801..0a3bf2d 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -329,7 +329,7 @@ void __init tx4938_mtd_init(int ch) unsigned long size = txx9_ce_res[ch].end - start + 1; if (!(TX4938_EBUSC_CR(ch) & 0x8)) - return; /* disabled */ + return; /* disabled */ txx9_physmap_flash_init(ch, start, size, &pdata); } diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index 5ff7a95..729a509 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -301,7 +301,7 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask) unsigned int ch_mask = 0; __u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg); - cts_mask |= ~1; /* only SIO0 have RTS/CTS */ + cts_mask |= ~1; /* only SIO0 have RTS/CTS */ if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO0) cts_mask |= 1 << 0; /* disable SIO0 RTS/CTS by PCFG setting */ if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO2) @@ -378,7 +378,7 @@ void __init tx4939_mtd_init(int ch) unsigned long size = txx9_ce_res[ch].end - start + 1; if (!(TX4939_EBUSC_CR(ch) & 0x8)) - return; /* disabled */ + return; /* disabled */ txx9_physmap_flash_init(ch, start, size, &pdata); } diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c index 8ebc384..f98baa6 100644 --- a/arch/mips/txx9/generic/smsc_fdc37m81x.c +++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c @@ -18,40 +18,40 @@ /* Common Registers */ #define SMSC_FDC37M81X_CONFIG_INDEX 0x00 #define SMSC_FDC37M81X_CONFIG_DATA 0x01 -#define SMSC_FDC37M81X_CONF 0x02 -#define SMSC_FDC37M81X_INDEX 0x03 -#define SMSC_FDC37M81X_DNUM 0x07 -#define SMSC_FDC37M81X_DID 0x20 -#define SMSC_FDC37M81X_DREV 0x21 -#define SMSC_FDC37M81X_PCNT 0x22 -#define SMSC_FDC37M81X_PMGT 0x23 -#define SMSC_FDC37M81X_OSC 0x24 -#define SMSC_FDC37M81X_CONFPA0 0x26 -#define SMSC_FDC37M81X_CONFPA1 0x27 -#define SMSC_FDC37M81X_TEST4 0x2B -#define SMSC_FDC37M81X_TEST5 0x2C -#define SMSC_FDC37M81X_TEST1 0x2D -#define SMSC_FDC37M81X_TEST2 0x2E -#define SMSC_FDC37M81X_TEST3 0x2F +#define SMSC_FDC37M81X_CONF 0x02 +#define SMSC_FDC37M81X_INDEX 0x03 +#define SMSC_FDC37M81X_DNUM 0x07 +#define SMSC_FDC37M81X_DID 0x20 +#define SMSC_FDC37M81X_DREV 0x21 +#define SMSC_FDC37M81X_PCNT 0x22 +#define SMSC_FDC37M81X_PMGT 0x23 +#define SMSC_FDC37M81X_OSC 0x24 +#define SMSC_FDC37M81X_CONFPA0 0x26 +#define SMSC_FDC37M81X_CONFPA1 0x27 +#define SMSC_FDC37M81X_TEST4 0x2B +#define SMSC_FDC37M81X_TEST5 0x2C +#define SMSC_FDC37M81X_TEST1 0x2D +#define SMSC_FDC37M81X_TEST2 0x2E +#define SMSC_FDC37M81X_TEST3 0x2F /* Logical device numbers */ -#define SMSC_FDC37M81X_FDD 0x00 -#define SMSC_FDC37M81X_SERIAL1 0x04 -#define SMSC_FDC37M81X_SERIAL2 0x05 -#define SMSC_FDC37M81X_KBD 0x07 +#define SMSC_FDC37M81X_FDD 0x00 +#define SMSC_FDC37M81X_SERIAL1 0x04 +#define SMSC_FDC37M81X_SERIAL2 0x05 +#define SMSC_FDC37M81X_KBD 0x07 /* Logical device Config Registers */ -#define SMSC_FDC37M81X_ACTIVE 0x30 +#define SMSC_FDC37M81X_ACTIVE 0x30 #define SMSC_FDC37M81X_BASEADDR0 0x60 #define SMSC_FDC37M81X_BASEADDR1 0x61 -#define SMSC_FDC37M81X_INT 0x70 -#define SMSC_FDC37M81X_INT2 0x72 -#define SMSC_FDC37M81X_MODE 0xF0 +#define SMSC_FDC37M81X_INT 0x70 +#define SMSC_FDC37M81X_INT2 0x72 +#define SMSC_FDC37M81X_MODE 0xF0 /* Chip Config Values */ #define SMSC_FDC37M81X_CONFIG_ENTER 0x55 #define SMSC_FDC37M81X_CONFIG_EXIT 0xaa -#define SMSC_FDC37M81X_CHIP_ID 0x4d +#define SMSC_FDC37M81X_CHIP_ID 0x4d static unsigned long g_smsc_fdc37m81x_base; diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index 6c22c49..3f48292 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -2,7 +2,7 @@ * Toshiba RBTX4927 specific interrupt handlers * * Author: MontaVista Software, Inc. - * source@mvista.com + * source@mvista.com * * Copyright 2001-2002 MontaVista Software Inc. * diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c index cc97c6a..fe6d0b5 100644 --- a/arch/mips/txx9/rbtx4927/prom.c +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -2,7 +2,7 @@ * rbtx4927 specific prom routines * * Author: MontaVista Software, Inc. - * source@mvista.com + * source@mvista.com * * Copyright 2001-2002 MontaVista Software Inc. * diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index b15adfc..3c516ef 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -2,7 +2,7 @@ * Toshiba rbtx4927 specific setup * * Author: MontaVista Software, Inc. - * source@mvista.com + * source@mvista.com * * Copyright 2001-2002 MontaVista Software Inc. * diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index d6e70da..c9afd05 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -107,10 +107,10 @@ static void __init rbtx4938_pci_setup(void) /* SPI support */ /* chip select for SPI devices */ -#define SEEPROM1_CS 7 /* PIO7 */ -#define SEEPROM2_CS 0 /* IOC */ -#define SEEPROM3_CS 1 /* IOC */ -#define SRTC_CS 2 /* IOC */ +#define SEEPROM1_CS 7 /* PIO7 */ +#define SEEPROM2_CS 0 /* IOC */ +#define SEEPROM3_CS 1 /* IOC */ +#define SRTC_CS 2 /* IOC */ #define SPI_BUSNO 0 static int __init rbtx4938_ethaddr_init(void) diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index e15641d..2da5f25 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -243,7 +243,7 @@ static int __init rbtx4939_led_probe(struct platform_device *pdev) } static struct platform_driver rbtx4939_led_driver = { - .driver = { + .driver = { .name = "rbtx4939-led", .owner = THIS_MODULE, }, @@ -337,7 +337,7 @@ static void rbtx4939_flash_copy_from(struct map_info *map, void *to, shift = bdipsw & 3; while (len) { curlen = min_t(unsigned long, len, - 0x400000 - (from & (0x400000 - 1))); + 0x400000 - (from & (0x400000 - 1))); memcpy(to, (void *)((from & ~0xc00000) | ((((from >> 22) + shift) & 3) << 22)), diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c index 6346c59..ff7d1c6 100644 --- a/arch/mips/vr41xx/common/bcu.c +++ b/arch/mips/vr41xx/common/bcu.c @@ -1,7 +1,7 @@ /* * bcu.c, Bus Control Unit routines for the NEC VR4100 series. * - * Copyright (C) 2002 MontaVista Software Inc. + * Copyright (C) 2002 MontaVista Software Inc. * Author: Yoichi Yuasa <source@mvista.com> * Copyright (C) 2003-2005 Yoichi Yuasa <yuasa@linux-mips.org> * @@ -176,7 +176,7 @@ static inline unsigned long calculate_vtclock(uint16_t clkspeed, unsigned long p } static inline unsigned long calculate_tclock(uint16_t clkspeed, unsigned long pclock, - unsigned long vtclock) + unsigned long vtclock) { unsigned long tclock = 0; diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c index 8ba7d04..05302bf 100644 --- a/arch/mips/vr41xx/common/cmu.c +++ b/arch/mips/vr41xx/common/cmu.c @@ -217,24 +217,24 @@ static int __init vr41xx_cmu_init(void) unsigned long start, size; switch (current_cpu_type()) { - case CPU_VR4111: - case CPU_VR4121: + case CPU_VR4111: + case CPU_VR4121: start = CMU_TYPE1_BASE; size = CMU_TYPE1_SIZE; - break; - case CPU_VR4122: - case CPU_VR4131: + break; + case CPU_VR4122: + case CPU_VR4131: start = CMU_TYPE2_BASE; size = CMU_TYPE2_SIZE; break; - case CPU_VR4133: + case CPU_VR4133: start = CMU_TYPE3_BASE; size = CMU_TYPE3_SIZE; - break; + break; default: panic("Unexpected CPU of NEC VR4100 series"); break; - } + } if (request_mem_region(start, size, "CMU") == NULL) return -EBUSY; diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c index b32b3bc..32cc8d6 100644 --- a/arch/mips/vr41xx/common/giu.c +++ b/arch/mips/vr41xx/common/giu.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series GIU platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c index a39ef32..41e873b 100644 --- a/arch/mips/vr41xx/common/icu.c +++ b/arch/mips/vr41xx/common/icu.c @@ -49,11 +49,11 @@ static unsigned char sysint1_assign[16] = { static unsigned char sysint2_assign[16] = { 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; -#define ICU1_TYPE1_BASE 0x0b000080UL -#define ICU2_TYPE1_BASE 0x0b000200UL +#define ICU1_TYPE1_BASE 0x0b000080UL +#define ICU2_TYPE1_BASE 0x0b000200UL -#define ICU1_TYPE2_BASE 0x0f000080UL -#define ICU2_TYPE2_BASE 0x0f0000a0UL +#define ICU1_TYPE2_BASE 0x0f000080UL +#define ICU2_TYPE2_BASE 0x0f0000a0UL #define ICU1_SIZE 0x20 #define ICU2_SIZE 0x1c diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c index 9fbf5f0..70a3f90 100644 --- a/arch/mips/vr41xx/common/pmu.c +++ b/arch/mips/vr41xx/common/pmu.c @@ -74,7 +74,7 @@ static inline void software_reset(void) change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); flush_cache_all(); write_c0_wired(0); - __asm__("jr %0"::"r"(0xbfc00000)); + __asm__("jr %0"::"r"(0xbfc00000)); break; } } diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c index 76e3e8a..c1e3d20 100644 --- a/arch/mips/vr41xx/common/rtc.c +++ b/arch/mips/vr41xx/common/rtc.c @@ -1,7 +1,7 @@ /* * NEC VR4100 series RTC platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c index ff84142..45836a9 100644 --- a/arch/mips/vr41xx/common/type.c +++ b/arch/mips/vr41xx/common/type.c @@ -1,7 +1,7 @@ /* * type.c, System type for NEC VR4100 series. * - * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2005 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/wrppmc/Platform b/arch/mips/wrppmc/Platform index e758645..dc78b25 100644 --- a/arch/mips/wrppmc/Platform +++ b/arch/mips/wrppmc/Platform @@ -2,6 +2,6 @@ # Wind River PPMC Board (4KC + GT64120) # platform-$(CONFIG_WR_PPMC) += wrppmc/ -cflags-$(CONFIG_WR_PPMC) += \ +cflags-$(CONFIG_WR_PPMC) += \ -I$(srctree)/arch/mips/include/asm/mach-wrppmc load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 diff --git a/arch/mips/wrppmc/irq.c b/arch/mips/wrppmc/irq.c index c6e7062..f237bf4 100644 --- a/arch/mips/wrppmc/irq.c +++ b/arch/mips/wrppmc/irq.c @@ -4,8 +4,8 @@ * Copyright (C) 2006, Wind River System Inc. * Author: Rongkai.Zhan, <rongkai.zhan@windriver.com> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ diff --git a/arch/mips/wrppmc/serial.c b/arch/mips/wrppmc/serial.c index 6f9d085..83f0f7d 100644 --- a/arch/mips/wrppmc/serial.c +++ b/arch/mips/wrppmc/serial.c @@ -1,7 +1,7 @@ /* * Registration of WRPPMC UART platform device. * - * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by |