diff options
Diffstat (limited to 'arch/mips')
30 files changed, 601 insertions, 193 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 29e8692..7e6fd1c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -49,7 +49,7 @@ config AR7 family: TNETD7100, 7200 and 7300. config BCM47XX - bool "BCM47XX based boards" + bool "Broadcom BCM47XX based boards" select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT @@ -509,6 +509,7 @@ config SIBYTE_SWARM bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 select DMA_COHERENT + select HAVE_PATA_PLATFORM select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE @@ -523,6 +524,7 @@ config SIBYTE_LITTLESUR depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT + select HAVE_PATA_PLATFORM select NR_CPUS_DEFAULT_2 select SIBYTE_SB1250 select SWAP_IO_SPACE @@ -1305,6 +1307,33 @@ config CPU_CAVIUM_OCTEON endchoice +if CPU_LOONGSON2F +config CPU_NOP_WORKAROUNDS + bool + +config CPU_JUMP_WORKAROUNDS + bool + +config CPU_LOONGSON2F_WORKAROUNDS + bool "Loongson 2F Workarounds" + default y + select CPU_NOP_WORKAROUNDS + select CPU_JUMP_WORKAROUNDS + help + Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which + require workarounds. Without workarounds the system may hang + unexpectedly. For more information please refer to the gas + -mfix-loongson2f-nop and -mfix-loongson2f-jump options. + + Loongson 2F03 and later have fixed these issues and no workarounds + are needed. The workarounds have no significant side effect on them + but may decrease the performance of the system so this option should + be disabled unless the kernel is intended to be run on 2F01 or 2F02 + systems. + + If unsure, please say Y. +endif # CPU_LOONGSON2F + config SYS_SUPPORTS_ZBOOT bool select HAVE_KERNEL_GZIP diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 2f2eac2..0b9c01a 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -136,6 +136,19 @@ cflags-$(CONFIG_CPU_LOONGSON2E) += \ $(call cc-option,-march=loongson2e,-march=r4600) cflags-$(CONFIG_CPU_LOONGSON2F) += \ $(call cc-option,-march=loongson2f,-march=r4600) +# enable the workarounds for loongson2f +ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) + else + cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop + endif + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) + else + cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump + endif +endif cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c index be7e92e..8876195 100644 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -66,12 +66,16 @@ static int __init db1200_arch_init(void) set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); - /* do not autoenable these: CPLD has broken edge int handling, - * and the CD handler setup requires manual enabling to work - * around that. + /* insert/eject pairs: one of both is always screaming. To avoid + * issues they must not be automatically enabled when initially + * requested. */ irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN; irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN; return 0; } diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig index 7fee027..6389ca0 100644 --- a/arch/mips/configs/bcm63xx_defconfig +++ b/arch/mips/configs/bcm63xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Sun May 31 20:17:18 2009 +# Linux kernel version: 2.6.34-rc2 +# Tue Mar 23 10:36:32 2010 # CONFIG_MIPS=y @@ -9,13 +9,14 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set # CONFIG_BCM47XX is not set CONFIG_BCM63XX=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set # CONFIG_NEC_MARKEINS is not set @@ -26,6 +27,7 @@ CONFIG_BCM63XX=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP28 is not set @@ -45,13 +47,17 @@ CONFIG_BCM63XX=y # CONFIG_WR_PPMC is not set # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set # # CPU support # +CONFIG_BCM63XX_CPU_6338=y +CONFIG_BCM63XX_CPU_6345=y CONFIG_BCM63XX_CPU_6348=y CONFIG_BCM63XX_CPU_6358=y CONFIG_BOARD_BCM963XX=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -69,10 +75,8 @@ CONFIG_CEVT_R4K=y CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_EARLY_PRINTK=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_SYS_HAS_EARLY_PRINTK=y -# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y CONFIG_CPU_BIG_ENDIAN=y @@ -85,7 +89,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -128,7 +133,7 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -146,9 +151,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y # CONFIG_HIGH_RES_TIMERS is not set @@ -170,6 +174,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -189,15 +194,12 @@ CONFIG_LOCALVERSION="" # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y # CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -205,11 +207,11 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -223,6 +225,10 @@ CONFIG_BASE_FULL=y # CONFIG_EVENTFD is not set # CONFIG_SHMEM is not set # CONFIG_AIO is not set + +# +# Kernel Performance Events And Counters +# # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set @@ -231,14 +237,17 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -246,14 +255,41 @@ CONFIG_BLOCK=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -263,15 +299,12 @@ CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set CONFIG_MMU=y CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # @@ -295,6 +328,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set CONFIG_NET=y @@ -333,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -347,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -359,7 +395,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_CFG80211=y +CONFIG_NL80211_TESTMODE=y +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=y +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -471,6 +527,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -484,13 +541,16 @@ CONFIG_HAVE_IDE=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -529,6 +589,7 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set # CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -541,17 +602,48 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set CONFIG_BCM63XX_ENET=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set +# CONFIG_ATH_COMMON is not set +CONFIG_B43=y +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +# CONFIG_B43_PCMCIA is not set +CONFIG_B43_PIO=y +# CONFIG_B43_PHY_LP is not set +CONFIG_B43_LEDS=y +# CONFIG_B43_DEBUG is not set +# CONFIG_B43LEGACY is not set +# CONFIG_HOSTAP is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_ZD1211RW is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -574,6 +666,7 @@ CONFIG_BCM63XX_ENET=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -607,6 +700,7 @@ CONFIG_BCM63XX_ENET=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_SERIAL_BCM63XX=y CONFIG_SERIAL_BCM63XX_CONSOLE=y # CONFIG_UNIX98_PTYS is not set @@ -629,6 +723,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set @@ -636,6 +735,8 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: @@ -644,16 +745,21 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # +# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -662,15 +768,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SSB=y CONFIG_SSB_SPROM=y +CONFIG_SSB_BLOCKIO=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y -# CONFIG_SSB_B43_PCI_BRIDGE is not set +CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y # CONFIG_SSB_PCMCIAHOST is not set # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -# CONFIG_SSB_DRIVER_PCICORE is not set +CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_SSB_DRIVER_MIPS is not set # @@ -680,27 +787,15 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +# CONFIG_VGA_ARB is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -710,11 +805,7 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y # # Display device support # -CONFIG_DISPLAY_SUPPORT=y - -# -# Display hardware drivers -# +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -741,13 +832,14 @@ CONFIG_USB=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_SSB is not set CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y @@ -796,7 +888,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -807,8 +898,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -819,7 +910,29 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -827,6 +940,10 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -838,12 +955,16 @@ CONFIG_RTC_LIB=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_FILE_LOCKING is not set +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -875,8 +996,6 @@ CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -888,6 +1007,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -898,7 +1018,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -906,7 +1025,46 @@ CONFIG_MISC_FILESYSTEMS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # @@ -918,29 +1076,23 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_EARLY_PRINTK=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" # CONFIG_CMDLINE_OVERRIDE is not set @@ -951,8 +1103,108 @@ CONFIG_CMDLINE="console=ttyS0,115200" # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=y +# CONFIG_CRYPTO_HW is not set # CONFIG_BINARY_PRINTF is not set # diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index 519197e..59dc0c7 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -29,7 +29,7 @@ * * Atomically reads the value of @v. */ -#define atomic_read(v) ((v)->counter) +#define atomic_read(v) (*(volatile int *)&(v)->counter) /* * atomic_set - set atomic variable @@ -410,7 +410,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) * @v: pointer of type atomic64_t * */ -#define atomic64_read(v) ((v)->counter) +#define atomic64_read(v) (*(volatile long *)&(v)->counter) /* * atomic64_set - set atomic variable diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index ed9aaaaf..2d28017 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -16,7 +16,7 @@ ({ \ __typeof(*(m)) __ret; \ \ - if (kernel_uses_llsc && R10000_LLSC_WAR) { \ + if (kernel_uses_llsc && R10000_LLSC_WAR) { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h index 032ca73..48bb823 100644 --- a/arch/mips/include/asm/i8253.h +++ b/arch/mips/include/asm/i8253.h @@ -12,7 +12,7 @@ #define PIT_CH0 0x40 #define PIT_CH2 0x42 -extern spinlock_t i8253_lock; +extern raw_spinlock_t i8253_lock; extern void setup_pit_timer(void); diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index 1cf7b14..fcdbe3a 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -307,7 +307,7 @@ extern unsigned long _loongson_addrwincfg_base; */ #define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ s##_WIN##w##_BASE = (src); \ - s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \ + s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \ s##_WIN##w##_MASK = ~(size-1); \ } while (0) diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 49382d5..c6e3c93 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -135,6 +135,12 @@ #define FPU_CSR_COND7 0x80000000 /* $fcc7 */ /* + * Bits 18 - 20 of the FPU Status Register will be read as 0, + * and should be written as zero. + */ +#define FPU_CSR_RSVD 0x001c0000 + +/* * X the exception cause indicator * E the exception enable * S the sticky/flag bit @@ -161,7 +167,8 @@ #define FPU_CSR_UDF_S 0x00000008 #define FPU_CSR_INE_S 0x00000004 -/* rounding mode */ +/* Bits 0 and 1 of FPU Status Register specify the rounding mode */ +#define FPU_CSR_RM 0x00000003 #define FPU_CSR_RN 0x0 /* nearest */ #define FPU_CSR_RZ 0x1 /* towards zero */ #define FPU_CSR_RU 0x2 /* towards +Infinity */ diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 26dc69d..1be4b0f 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -120,9 +120,14 @@ #endif #define FIRST_USER_ADDRESS 0UL -#define VMALLOC_START MAP_BASE +/* + * TLB refill handlers also map the vmalloc area into xuseg. Avoid + * the first couple of pages so NULL pointer dereferences will still + * reliably trap. + */ +#define VMALLOC_START (MAP_BASE + (2 * PAGE_SIZE)) #define VMALLOC_END \ - (VMALLOC_START + \ + (MAP_BASE + \ min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \ (1UL << cpu_vmbits)) - (1UL << 32)) diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index ce47118..cdc6a46 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -142,9 +142,9 @@ extern int ptrace_set_watch_regs(struct task_struct *child, extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); -extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET; +extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET; -static inline void die_if_kernel(const char *str, const struct pt_regs *regs) +static inline void die_if_kernel(const char *str, struct pt_regs *regs) { if (unlikely(!user_mode(regs))) die(str, regs); diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index c841912..58730c5 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -121,7 +121,7 @@ .endm #else .macro get_saved_sp /* Uniprocessor variation */ -#ifdef CONFIG_CPU_LOONGSON2F +#ifdef CONFIG_CPU_JUMP_WORKAROUNDS /* * Clear BTB (branch target buffer), forbid RAS (return address * stack) to workaround the Out-of-order Issue in Loongson2F diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h index 11a8b52..697e40c 100644 --- a/arch/mips/include/asm/uasm.h +++ b/arch/mips/include/asm/uasm.h @@ -167,6 +167,24 @@ static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \ #define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1) #define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3) +static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1, + unsigned int a2, unsigned int a3) +{ + if (a3 < 32) + uasm_i_dsrl(p, a1, a2, a3); + else + uasm_i_dsrl32(p, a1, a2, a3 - 32); +} + +static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1, + unsigned int a2, unsigned int a3) +{ + if (a3 < 32) + uasm_i_dsll(p, a1, a2, a3); + else + uasm_i_dsll32(p, a1, a2, a3 - 32); +} + /* Handle relocations. */ struct uasm_reloc { u32 *addr; diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index 7043f6b..0d0f054 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -76,15 +76,9 @@ void __init plat_mem_setup(void) #ifdef CONFIG_VT screen_info = (struct screen_info) { - 0, 0, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig_video_page */ - 0, /* orig_video_mode */ - 160, /* orig_video_cols */ - 0, 0, 0, /* unused, ega_bx, unused */ - 64, /* orig_video_lines */ - 0, /* orig_video_isVGA */ - 16 /* orig_video_points */ + .orig_video_cols = 160, + .orig_video_lines = 64, + .orig_video_points = 16, }; #endif diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index ed5c441..9479406 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -15,7 +15,7 @@ #include <asm/io.h> #include <asm/time.h> -DEFINE_SPINLOCK(i8253_lock); +DEFINE_RAW_SPINLOCK(i8253_lock); EXPORT_SYMBOL(i8253_lock); /* @@ -26,7 +26,7 @@ EXPORT_SYMBOL(i8253_lock); static void init_pit_timer(enum clock_event_mode mode, struct clock_event_device *evt) { - spin_lock(&i8253_lock); + raw_spin_lock(&i8253_lock); switch(mode) { case CLOCK_EVT_MODE_PERIODIC: @@ -55,7 +55,7 @@ static void init_pit_timer(enum clock_event_mode mode, /* Nothing to do here */ break; } - spin_unlock(&i8253_lock); + raw_spin_unlock(&i8253_lock); } /* @@ -65,10 +65,10 @@ static void init_pit_timer(enum clock_event_mode mode, */ static int pit_next_event(unsigned long delta, struct clock_event_device *evt) { - spin_lock(&i8253_lock); + raw_spin_lock(&i8253_lock); outb_p(delta & 0xff , PIT_CH0); /* LSB */ outb(delta >> 8 , PIT_CH0); /* MSB */ - spin_unlock(&i8253_lock); + raw_spin_unlock(&i8253_lock); return 0; } @@ -137,7 +137,7 @@ static cycle_t pit_read(struct clocksource *cs) static int old_count; static u32 old_jifs; - spin_lock_irqsave(&i8253_lock, flags); + raw_spin_lock_irqsave(&i8253_lock, flags); /* * Although our caller may have the read side of xtime_lock, * this is now a seqlock, and we are cheating in this routine @@ -183,7 +183,7 @@ static cycle_t pit_read(struct clocksource *cs) old_count = count; old_jifs = jifs; - spin_unlock_irqrestore(&i8253_lock, flags); + raw_spin_unlock_irqrestore(&i8253_lock, flags); count = (LATCH - 1) - count; diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 44337ba..a5297e2 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -385,7 +385,7 @@ EXPORT(sysn32_call_table) PTR sys_fchmodat PTR sys_faccessat PTR compat_sys_pselect6 - PTR sys_ppoll /* 6265 */ + PTR compat_sys_ppoll /* 6265 */ PTR sys_unshare PTR sys_splice PTR sys_sync_file_range diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 1a4dd65..d612c6d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -352,9 +352,10 @@ void show_registers(const struct pt_regs *regs) static DEFINE_SPINLOCK(die_lock); -void __noreturn die(const char * str, const struct pt_regs * regs) +void __noreturn die(const char * str, struct pt_regs * regs) { static int die_counter; + int sig = SIGSEGV; #ifdef CONFIG_MIPS_MT_SMTC unsigned long dvpret = dvpe(); #endif /* CONFIG_MIPS_MT_SMTC */ @@ -365,6 +366,10 @@ void __noreturn die(const char * str, const struct pt_regs * regs) #ifdef CONFIG_MIPS_MT_SMTC mips_mt_regdump(dvpret); #endif /* CONFIG_MIPS_MT_SMTC */ + + if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP) + sig = 0; + printk("%s[#%d]:\n", str, ++die_counter); show_registers(regs); add_taint(TAINT_DIE); @@ -379,7 +384,7 @@ void __noreturn die(const char * str, const struct pt_regs * regs) panic("Fatal exception"); } - do_exit(SIGSEGV); + do_exit(sig); } extern struct exception_table_entry __start___dbe_table[]; @@ -1557,12 +1562,7 @@ static char panic_null_cerr[] __cpuinitdata = void __cpuinit set_uncached_handler(unsigned long offset, void *addr, unsigned long size) { -#ifdef CONFIG_32BIT - unsigned long uncached_ebase = KSEG1ADDR(ebase); -#endif -#ifdef CONFIG_64BIT - unsigned long uncached_ebase = TO_UNCAC(ebase); -#endif + unsigned long uncached_ebase = CKSEG1ADDR(ebase); if (!addr) panic(panic_null_cerr); diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index 853f184..81fbe6b 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -24,7 +24,7 @@ static const char *system_types[] = { [MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box", [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", - [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches", + [MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f", [MACH_LEMOTE_NAS] "lemote-nas-2f", [MACH_LEMOTE_LL2F] "lemote-lynloong-2f", [MACH_LOONGSON_END] NULL, diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index ec2f796..30eba60 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -75,7 +75,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, unsigned long end = offset + size; if (__uncached_access(file, offset)) { - if (((uca_start && offset) >= uca_start) && + if (uca_start && (offset >= uca_start) && (end <= uca_end)) return __pgprot((pgprot_val(vma_prot) & ~_CACHE_MASK) | @@ -96,7 +96,7 @@ static int __init find_vga_mem_init(void) return 0; for_each_pci_dev(dev) { - if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) { + if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { r = &dev->resource[idx]; if (!r->start && r->end) diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c index 4bd9c18..9e10d62 100644 --- a/arch/mips/loongson/common/reset.c +++ b/arch/mips/loongson/common/reset.c @@ -16,13 +16,31 @@ #include <loongson.h> +static inline void loongson_reboot(void) +{ +#ifndef CONFIG_CPU_JUMP_WORKAROUNDS + ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); +#else + void (*func)(void); + + func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4); + + __asm__ __volatile__( + " .set noat \n" + " jr %[func] \n" + " .set at \n" + : /* No outputs */ + : [func] "r" (func)); +#endif +} + static void loongson_restart(char *command) { /* do preparation for reboot */ mach_prepare_reboot(); /* reboot via jumping to boot base address */ - ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); + loongson_reboot(); } static void loongson_poweroff(void) diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c index 4cd2aa9..27d826b 100644 --- a/arch/mips/loongson/common/setup.c +++ b/arch/mips/loongson/common/setup.c @@ -41,15 +41,12 @@ void __init plat_mem_setup(void) conswitchp = &vga_con; screen_info = (struct screen_info) { - 0, 25, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig-video-page */ - 0, /* orig-video-mode */ - 80, /* orig-video-cols */ - 0, 0, 0, /* ega_ax, ega_bx, ega_cx */ - 25, /* orig-video-lines */ - VIDEO_TYPE_VGAC, /* orig-video-isVGA */ - 16 /* orig-video-points */ + .orig_x = 0, + .orig_y = 25, + .orig_video_cols = 80, + .orig_video_lines = 25, + .orig_video_isVGA = VIDEO_TYPE_VGAC, + .orig_video_points = 16, }; #elif defined(CONFIG_DUMMY_CONSOLE) conswitchp = &dummy_con; diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c index 882dfcd4..1d8b4d2 100644 --- a/arch/mips/loongson/lemote-2f/irq.c +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -79,7 +79,7 @@ void mach_irq_dispatch(unsigned int pending) if (pending & CAUSEF_IP7) do_IRQ(LOONGSON_TIMER_IRQ); else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ -#ifdef CONFIG_OPROFILE +#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE) do_IRQ(LOONGSON2_PERFCNT_IRQ); #endif bonito_irqdispatch(); diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 8f2f8e9..f2338d1 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -78,6 +78,9 @@ DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats); #define FPCREG_RID 0 /* $0 = revision id */ #define FPCREG_CSR 31 /* $31 = csr */ +/* Determine rounding mode from the RM bits of the FCSR */ +#define modeindex(v) ((v) & FPU_CSR_RM) + /* Convert Mips rounding mode (0..3) to IEEE library modes. */ static const unsigned char ieee_rm[4] = { [FPU_CSR_RN] = IEEE754_RN, @@ -384,10 +387,14 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) (void *) (xcp->cp0_epc), MIPSInst_RT(ir), value); #endif - value &= (FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03); - ctx->fcr31 &= ~(FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03); - /* convert to ieee library modes */ - ctx->fcr31 |= (value & ~0x3) | ieee_rm[value & 0x3]; + + /* + * Don't write reserved bits, + * and convert to ieee library modes + */ + ctx->fcr31 = (value & + ~(FPU_CSR_RSVD | FPU_CSR_RM)) | + ieee_rm[modeindex(value)]; } if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) { return SIGFPE; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index d1f68aa..86f004d 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -31,6 +31,16 @@ #include <asm/war.h> #include <asm/uasm.h> +/* + * TLB load/store/modify handlers. + * + * Only the fastpath gets synthesized at runtime, the slowpath for + * do_page_fault remains normal asm. + */ +extern void tlb_do_page_fault_0(void); +extern void tlb_do_page_fault_1(void); + + static inline int r45k_bvahwbug(void) { /* XXX: We should probe for the presence of this bug, but we don't. */ @@ -83,6 +93,7 @@ enum label_id { label_nopage_tlbm, label_smp_pgtable_change, label_r3000_write_probe_fail, + label_large_segbits_fault, #ifdef CONFIG_HUGETLB_PAGE label_tlb_huge_update, #endif @@ -101,6 +112,7 @@ UASM_L_LA(_nopage_tlbs) UASM_L_LA(_nopage_tlbm) UASM_L_LA(_smp_pgtable_change) UASM_L_LA(_r3000_write_probe_fail) +UASM_L_LA(_large_segbits_fault) #ifdef CONFIG_HUGETLB_PAGE UASM_L_LA(_tlb_huge_update) #endif @@ -157,6 +169,10 @@ static u32 tlb_handler[128] __cpuinitdata; static struct uasm_label labels[128] __cpuinitdata; static struct uasm_reloc relocs[128] __cpuinitdata; +#ifdef CONFIG_64BIT +static int check_for_high_segbits __cpuinitdata; +#endif + #ifndef CONFIG_MIPS_PGD_C0_CONTEXT /* * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current, @@ -408,7 +424,7 @@ static __cpuinit __maybe_unused void build_convert_pte_to_entrylo(u32 **p, UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); } else { #ifdef CONFIG_64BIT_PHYS_ADDR - uasm_i_dsrl(p, reg, reg, ilog2(_PAGE_GLOBAL)); + uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL)); #else UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL)); #endif @@ -532,7 +548,24 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, * The vmalloc handling is not in the hotpath. */ uasm_i_dmfc0(p, tmp, C0_BADVADDR); - uasm_il_bltz(p, r, tmp, label_vmalloc); + + if (check_for_high_segbits) { + /* + * The kernel currently implicitely assumes that the + * MIPS SEGBITS parameter for the processor is + * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never + * allocate virtual addresses outside the maximum + * range for SEGBITS = (PGDIR_SHIFT+PGDIR_BITS). But + * that doesn't prevent user code from accessing the + * higher xuseg addresses. Here, we make sure that + * everything but the lower xuseg addresses goes down + * the module_alloc/vmalloc path. + */ + uasm_i_dsrl_safe(p, ptr, tmp, PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3); + uasm_il_bnez(p, r, ptr, label_vmalloc); + } else { + uasm_il_bltz(p, r, tmp, label_vmalloc); + } /* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */ #ifdef CONFIG_MIPS_PGD_C0_CONTEXT @@ -549,14 +582,14 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, * SMTC uses TCBind value as "CPU" index */ uasm_i_mfc0(p, ptr, C0_TCBIND); - uasm_i_dsrl(p, ptr, ptr, 19); + uasm_i_dsrl_safe(p, ptr, ptr, 19); # else /* * 64 bit SMP running in XKPHYS has smp_processor_id() << 3 * stored in CONTEXT. */ uasm_i_dmfc0(p, ptr, C0_CONTEXT); - uasm_i_dsrl(p, ptr, ptr, 23); + uasm_i_dsrl_safe(p, ptr, ptr, 23); # endif UASM_i_LA_mostly(p, tmp, pgdc); uasm_i_daddu(p, ptr, ptr, tmp); @@ -569,44 +602,78 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, uasm_l_vmalloc_done(l, *p); - if (PGDIR_SHIFT - 3 < 32) /* get pgd offset in bytes */ - uasm_i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3); - else - uasm_i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32); + /* get pgd offset in bytes */ + uasm_i_dsrl_safe(p, tmp, tmp, PGDIR_SHIFT - 3); uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3); uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */ #ifndef __PAGETABLE_PMD_FOLDED uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */ uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */ - uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */ + uasm_i_dsrl_safe(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */ uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3); uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */ #endif } +enum vmalloc64_mode {not_refill, refill}; /* * BVADDR is the faulting address, PTR is scratch. * PTR will hold the pgd for vmalloc. */ static void __cpuinit build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, - unsigned int bvaddr, unsigned int ptr) + unsigned int bvaddr, unsigned int ptr, + enum vmalloc64_mode mode) { long swpd = (long)swapper_pg_dir; + int single_insn_swpd; + int did_vmalloc_branch = 0; + + single_insn_swpd = uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd); uasm_l_vmalloc(l, *p); - if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) { - uasm_il_b(p, r, label_vmalloc_done); - uasm_i_lui(p, ptr, uasm_rel_hi(swpd)); - } else { - UASM_i_LA_mostly(p, ptr, swpd); - uasm_il_b(p, r, label_vmalloc_done); - if (uasm_in_compat_space_p(swpd)) - uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd)); - else - uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd)); + if (mode == refill && check_for_high_segbits) { + if (single_insn_swpd) { + uasm_il_bltz(p, r, bvaddr, label_vmalloc_done); + uasm_i_lui(p, ptr, uasm_rel_hi(swpd)); + did_vmalloc_branch = 1; + /* fall through */ + } else { + uasm_il_bgez(p, r, bvaddr, label_large_segbits_fault); + } + } + if (!did_vmalloc_branch) { + if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) { + uasm_il_b(p, r, label_vmalloc_done); + uasm_i_lui(p, ptr, uasm_rel_hi(swpd)); + } else { + UASM_i_LA_mostly(p, ptr, swpd); + uasm_il_b(p, r, label_vmalloc_done); + if (uasm_in_compat_space_p(swpd)) + uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd)); + else + uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd)); + } + } + if (mode == refill && check_for_high_segbits) { + uasm_l_large_segbits_fault(l, *p); + /* + * We get here if we are an xsseg address, or if we are + * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary. + * + * Ignoring xsseg (assume disabled so would generate + * (address errors?), the only remaining possibility + * is the upper xuseg addresses. On processors with + * TLB_SEGBITS <= PGDIR_SHIFT+PGDIR_BITS, these + * addresses would have taken an address error. We try + * to mimic that here by taking a load/istream page + * fault. + */ + UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0); + uasm_i_jr(p, ptr); + uasm_i_nop(p); } } @@ -720,9 +787,9 @@ static void __cpuinit build_update_entries(u32 **p, unsigned int tmp, UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); } else { - uasm_i_dsrl(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */ + uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */ UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ - uasm_i_dsrl(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */ + uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */ } UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */ } else { @@ -793,9 +860,9 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) uasm_i_dmfc0(&p, K0, C0_BADVADDR); uasm_i_dmfc0(&p, K1, C0_ENTRYHI); uasm_i_xor(&p, K0, K0, K1); - uasm_i_dsrl32(&p, K1, K0, 62 - 32); - uasm_i_dsrl(&p, K0, K0, 12 + 1); - uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32); + uasm_i_dsrl_safe(&p, K1, K0, 62); + uasm_i_dsrl_safe(&p, K0, K0, 12 + 1); + uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits); uasm_i_or(&p, K0, K0, K1); uasm_il_bnez(&p, &r, K0, label_leave); /* No need for uasm_i_nop */ @@ -825,7 +892,7 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) #endif #ifdef CONFIG_64BIT - build_get_pgd_vmalloc64(&p, &l, &r, K0, K1); + build_get_pgd_vmalloc64(&p, &l, &r, K0, K1, refill); #endif /* @@ -935,15 +1002,6 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) } /* - * TLB load/store/modify handlers. - * - * Only the fastpath gets synthesized at runtime, the slowpath for - * do_page_fault remains normal asm. - */ -extern void tlb_do_page_fault_0(void); -extern void tlb_do_page_fault_1(void); - -/* * 128 instructions for the fastpath handler is generous and should * never be exceeded. */ @@ -1302,7 +1360,7 @@ build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l, uasm_i_eret(p); /* return from trap */ #ifdef CONFIG_64BIT - build_get_pgd_vmalloc64(p, l, r, tmp, ptr); + build_get_pgd_vmalloc64(p, l, r, tmp, ptr, not_refill); #endif } @@ -1322,9 +1380,9 @@ static void __cpuinit build_r4000_tlb_load_handler(void) uasm_i_dmfc0(&p, K0, C0_BADVADDR); uasm_i_dmfc0(&p, K1, C0_ENTRYHI); uasm_i_xor(&p, K0, K0, K1); - uasm_i_dsrl32(&p, K1, K0, 62 - 32); - uasm_i_dsrl(&p, K0, K0, 12 + 1); - uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32); + uasm_i_dsrl_safe(&p, K1, K0, 62); + uasm_i_dsrl_safe(&p, K0, K0, 12 + 1); + uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits); uasm_i_or(&p, K0, K0, K1); uasm_il_bnez(&p, &r, K0, label_leave); /* No need for uasm_i_nop */ @@ -1526,6 +1584,10 @@ void __cpuinit build_tlb_refill_handler(void) */ static int run_once = 0; +#ifdef CONFIG_64BIT + check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3); +#endif + switch (current_cpu_type()) { case CPU_R2000: case CPU_R3000: diff --git a/arch/mips/nxp/pnx8550/common/reset.c b/arch/mips/nxp/pnx8550/common/reset.c index 76bc3ec..fadd8744 100644 --- a/arch/mips/nxp/pnx8550/common/reset.c +++ b/arch/mips/nxp/pnx8550/common/reset.c @@ -20,6 +20,8 @@ * Reset the PNX8550 board. * */ +#include <linux/kernel.h> + #include <asm/reboot.h> #include <glb.h> diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c index 29e2326..fa3bf66 100644 --- a/arch/mips/oprofile/op_model_loongson2.c +++ b/arch/mips/oprofile/op_model_loongson2.c @@ -122,7 +122,7 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id) */ /* Check whether the irq belongs to me */ - enabled = read_c0_perfcnt() & LOONGSON2_PERFCNT_INT_EN; + enabled = read_c0_perfctrl() & LOONGSON2_PERFCNT_INT_EN; if (!enabled) return IRQ_NONE; enabled = reg.cnt1_enabled | reg.cnt2_enabled; diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index ada24e6..1711e8e 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -37,6 +37,7 @@ #include <linux/mm.h> #include <linux/console.h> #include <linux/tty.h> +#include <linux/vt.h> #include <asm/io.h> @@ -254,7 +255,7 @@ static int __init sb1250_pcibios_init(void) * XXX ehs: Should this happen in PCI Device mode? */ io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024); - sb1250_controller.io_map_base = io_map_base; + sb1250_controller.io_map_base = (unsigned long)io_map_base; set_io_port_base((unsigned long)io_map_base); #ifdef CONFIG_SIBYTE_HAS_LDT diff --git a/arch/mips/sgi-ip22/ip22-berr.c b/arch/mips/sgi-ip22/ip22-berr.c index de6a0cc..911d399 100644 --- a/arch/mips/sgi-ip22/ip22-berr.c +++ b/arch/mips/sgi-ip22/ip22-berr.c @@ -89,7 +89,7 @@ static void print_buserr(void) void ip22_be_interrupt(int irq) { const int field = 2 * sizeof(unsigned long); - const struct pt_regs *regs = get_irq_regs(); + struct pt_regs *regs = get_irq_regs(); save_and_clear_buserr(); print_buserr(); diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c index 30e12e2..88c684e 100644 --- a/arch/mips/sgi-ip22/ip28-berr.c +++ b/arch/mips/sgi-ip22/ip28-berr.c @@ -453,7 +453,7 @@ mips_be_fatal: void ip22_be_interrupt(int irq) { - const struct pt_regs *regs = get_irq_regs(); + struct pt_regs *regs = get_irq_regs(); count_be_interrupt++; diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index 5277aac..c308989 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -145,15 +145,14 @@ void __init plat_mem_setup(void) #ifdef CONFIG_VT screen_info = (struct screen_info) { - 0, 0, /* orig-x, orig-y */ - 0, /* unused */ - 52, /* orig_video_page */ - 3, /* orig_video_mode */ - 80, /* orig_video_cols */ - 4626, 3, 9, /* unused, ega_bx, unused */ - 25, /* orig_video_lines */ - 0x22, /* orig_video_isVGA */ - 16 /* orig_video_points */ + .orig_video_page = 52, + .orig_video_mode = 3, + .orig_video_cols = 80, + .flags = 12, + .orig_video_ega_bx = 3, + .orig_video_lines = 25, + .orig_video_isVGA = 0x22, + .orig_video_points = 16, }; /* XXXKW for CFE, get lines/cols from environment */ #endif |