1 files changed, 309 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c
new file mode 100644
index 0000000..ec26599
--- /dev/null
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -0,0 +1,309 @@
+/*
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ *	2.3.99 Updates
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ * 	Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space.  The allocator for that is here.  When the communication
+ * process is reset, we reclaim the memory available.  There is
+ * currently no deallocator for this memory.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpc8260.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cpm2.h>
+#include <asm/rheap.h>
+#include <asm/fs_pd.h>
+
+#include <sysdev/fsl_soc.h>
+
+static void cpm2_dpinit(void);
+cpm_cpm2_t	*cpmp;		/* Pointer to comm processor space */
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+cpm2_map_t *cpm2_immr;
+intctl_cpm2_t *cpm2_intctl;
+
+#define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
+					   of space for CPM as it is larger
+					   than on PQ2 */
+
+void
+cpm2_reset(void)
+{
+	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+	cpm2_intctl = cpm2_map(im_intctl);
+
+	/* Reclaim the DP memory for our use.
+	 */
+	cpm2_dpinit();
+
+	/* Tell everyone where the comm processor resides.
+	 */
+	cpmp = &cpm2_immr->im_cpm;
+}
+
+/* Set a baud rate generator.  This needs lots of work.  There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks.  The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers).  Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK	(get_brgfreq())
+#define BRG_UART_CLK	(BRG_INT_CLK/16)
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+cpm_setbrg(uint brg, uint rate)
+{
+	volatile uint	*bp;
+
+	/* This is good enough to get SMCs running.....
+	*/
+	if (brg < 4) {
+		bp = cpm2_map_size(im_brgc1, 16);
+	} else {
+		bp = cpm2_map_size(im_brgc5, 16);
+		brg -= 4;
+	}
+	bp += brg;
+	*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
+
+	cpm2_unmap(bp);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	volatile uint	*bp;
+
+	if (brg < 4) {
+		bp = cpm2_map_size(im_brgc1, 16);
+	}
+	else {
+		bp = cpm2_map_size(im_brgc5, 16);
+		brg -= 4;
+	}
+	bp += brg;
+	*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	if (div16)
+		*bp |= CPM_BRG_DIV16;
+
+	cpm2_unmap(bp);
+}
+
+int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
+{
+	int ret = 0;
+	int shift;
+	int i, bits = 0;
+	cpmux_t *im_cpmux;
+	u32 *reg;
+	u32 mask = 7;
+	u8 clk_map [24][3] = {
+		{CPM_CLK_FCC1, CPM_BRG5, 0},
+		{CPM_CLK_FCC1, CPM_BRG6, 1},
+		{CPM_CLK_FCC1, CPM_BRG7, 2},
+		{CPM_CLK_FCC1, CPM_BRG8, 3},
+		{CPM_CLK_FCC1, CPM_CLK9, 4},
+		{CPM_CLK_FCC1, CPM_CLK10, 5},
+		{CPM_CLK_FCC1, CPM_CLK11, 6},
+		{CPM_CLK_FCC1, CPM_CLK12, 7},
+		{CPM_CLK_FCC2, CPM_BRG5, 0},
+		{CPM_CLK_FCC2, CPM_BRG6, 1},
+		{CPM_CLK_FCC2, CPM_BRG7, 2},
+		{CPM_CLK_FCC2, CPM_BRG8, 3},
+		{CPM_CLK_FCC2, CPM_CLK13, 4},
+		{CPM_CLK_FCC2, CPM_CLK14, 5},
+		{CPM_CLK_FCC2, CPM_CLK15, 6},
+		{CPM_CLK_FCC2, CPM_CLK16, 7},
+		{CPM_CLK_FCC3, CPM_BRG5, 0},
+		{CPM_CLK_FCC3, CPM_BRG6, 1},
+		{CPM_CLK_FCC3, CPM_BRG7, 2},
+		{CPM_CLK_FCC3, CPM_BRG8, 3},
+		{CPM_CLK_FCC3, CPM_CLK13, 4},
+		{CPM_CLK_FCC3, CPM_CLK14, 5},
+		{CPM_CLK_FCC3, CPM_CLK15, 6},
+		{CPM_CLK_FCC3, CPM_CLK16, 7}
+		};
+
+	im_cpmux = cpm2_map(im_cpmux);
+
+	switch (target) {
+	case CPM_CLK_SCC1:
+		reg = &im_cpmux->cmx_scr;
+		shift = 24;
+	case CPM_CLK_SCC2:
+		reg = &im_cpmux->cmx_scr;
+		shift = 16;
+		break;
+	case CPM_CLK_SCC3:
+		reg = &im_cpmux->cmx_scr;
+		shift = 8;
+		break;
+	case CPM_CLK_SCC4:
+		reg = &im_cpmux->cmx_scr;
+		shift = 0;
+		break;
+	case CPM_CLK_FCC1:
+		reg = &im_cpmux->cmx_fcr;
+		shift = 24;
+		break;
+	case CPM_CLK_FCC2:
+		reg = &im_cpmux->cmx_fcr;
+		shift = 16;
+		break;
+	case CPM_CLK_FCC3:
+		reg = &im_cpmux->cmx_fcr;
+		shift = 8;
+		break;
+	default:
+		printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n");
+		return -EINVAL;
+	}
+
+	if (mode == CPM_CLK_RX)
+		shift +=3;
+
+	for (i=0; i<24; i++) {
+		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+			bits = clk_map[i][2];
+			break;
+		}
+	}
+	if (i == sizeof(clk_map)/3)
+	    ret = -EINVAL;
+
+	bits <<= shift;
+	mask <<= shift;
+	out_be32(reg, (in_be32(reg) & ~mask) | bits);
+
+	cpm2_unmap(im_cpmux);
+	return ret;
+}
+
+/*
+ * dpalloc / dpfree bits.
+ */
+static spinlock_t cpm_dpmem_lock;
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t cpm_boot_dpmem_rh_block[16];
+static rh_info_t cpm_dpmem_info;
+static u8* im_dprambase;
+
+static void cpm2_dpinit(void)
+{
+	spin_lock_init(&cpm_dpmem_lock);
+
+	im_dprambase = ioremap(CPM_MAP_ADDR, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
+
+	/* initialize the info header */
+	rh_init(&cpm_dpmem_info, 1,
+			sizeof(cpm_boot_dpmem_rh_block) /
+			sizeof(cpm_boot_dpmem_rh_block[0]),
+			cpm_boot_dpmem_rh_block);
+
+	/* Attach the usable dpmem area */
+	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
+	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
+	 * varies with the processor and the microcode patches activated.
+	 * But the following should be at least safe.
+	 */
+	rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE,
+			CPM_DATAONLY_SIZE);
+}
+
+/* This function returns an index into the DPRAM area.
+ */
+uint cpm_dpalloc(uint size, uint align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	cpm_dpmem_info.alignment = align;
+	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc);
+
+int cpm_dpfree(uint offset)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	ret = rh_free(&cpm_dpmem_info, (void *)offset);
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(cpm_dpfree);
+
+/* not sure if this is ever needed */
+uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	cpm_dpmem_info.alignment = align;
+	start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc_fixed);
+
+void cpm_dpdump(void)
+{
+	rh_dump(&cpm_dpmem_info);
+}
+EXPORT_SYMBOL(cpm_dpdump);
+
+void *cpm_dpram_addr(uint offset)
+{
+	return (void *)(im_dprambase + offset);
+}
+EXPORT_SYMBOL(cpm_dpram_addr);