diff options
Diffstat (limited to 'arch/powerpc/sysdev')
| -rw-r--r-- | arch/powerpc/sysdev/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/fsl_pci.c | 7 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/fsl_soc.h | 5 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/qe_lib/Kconfig | 3 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/qe_lib/gpio.c | 195 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/simple_gpio.c | 155 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/simple_gpio.h | 12 |
7 files changed, 374 insertions, 4 deletions
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 5afce11..b33b28a 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y) obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o +obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o obj-$(CONFIG_RAPIDIO) += fsl_rio.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index d5f9ae0..f611d03 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -29,7 +29,8 @@ #if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx) /* atmu setup for fsl pci/pcie controller */ -void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc) +static void __init setup_pci_atmu(struct pci_controller *hose, + struct resource *rsrc) { struct ccsr_pci __iomem *pci; int i; @@ -86,7 +87,7 @@ void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc) out_be32(&pci->piw[2].piwar, PIWAR_2G); } -void __init setup_pci_cmd(struct pci_controller *hose) +static void __init setup_pci_cmd(struct pci_controller *hose) { u16 cmd; int cap_x; @@ -130,7 +131,7 @@ static void __init quirk_fsl_pcie_header(struct pci_dev *dev) return ; } -int __init fsl_pcie_check_link(struct pci_controller *hose) +static int __init fsl_pcie_check_link(struct pci_controller *hose) { u32 val; early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 60f7f22..9c744e4 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -5,8 +5,13 @@ #include <asm/mmu.h> extern phys_addr_t get_immrbase(void); +#if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx) extern u32 get_brgfreq(void); extern u32 get_baudrate(void); +#else +static inline u32 get_brgfreq(void) { return -1; } +static inline u32 get_baudrate(void) { return -1; } +#endif extern u32 fsl_get_sys_freq(void); struct spi_board_info; diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig index 76ffbc4..41ac3df 100644 --- a/arch/powerpc/sysdev/qe_lib/Kconfig +++ b/arch/powerpc/sysdev/qe_lib/Kconfig @@ -22,5 +22,6 @@ config UCC config QE_USB bool + default y if USB_GADGET_FSL_QE help - QE USB Host Controller support + QE USB Controller support diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c index 8e5a0bc..3485288 100644 --- a/arch/powerpc/sysdev/qe_lib/gpio.c +++ b/arch/powerpc/sysdev/qe_lib/gpio.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/spinlock.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_gpio.h> @@ -24,8 +25,14 @@ struct qe_gpio_chip { struct of_mm_gpio_chip mm_gc; spinlock_t lock; + unsigned long pin_flags[QE_PIO_PINS]; +#define QE_PIN_REQUESTED 0 + /* shadowed data register to clear/set bits safely */ u32 cpdata; + + /* saved_regs used to restore dedicated functions */ + struct qe_pio_regs saved_regs; }; static inline struct qe_gpio_chip * @@ -40,6 +47,12 @@ static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc) struct qe_pio_regs __iomem *regs = mm_gc->regs; qe_gc->cpdata = in_be32(®s->cpdata); + qe_gc->saved_regs.cpdata = qe_gc->cpdata; + qe_gc->saved_regs.cpdir1 = in_be32(®s->cpdir1); + qe_gc->saved_regs.cpdir2 = in_be32(®s->cpdir2); + qe_gc->saved_regs.cppar1 = in_be32(®s->cppar1); + qe_gc->saved_regs.cppar2 = in_be32(®s->cppar2); + qe_gc->saved_regs.cpodr = in_be32(®s->cpodr); } static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio) @@ -103,6 +116,188 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) return 0; } +struct qe_pin { + /* + * The qe_gpio_chip name is unfortunate, we should change that to + * something like qe_pio_controller. Someday. + */ + struct qe_gpio_chip *controller; + int num; +}; + +/** + * qe_pin_request - Request a QE pin + * @np: device node to get a pin from + * @index: index of a pin in the device tree + * Context: non-atomic + * + * This function return qe_pin so that you could use it with the rest of + * the QE Pin Multiplexing API. + */ +struct qe_pin *qe_pin_request(struct device_node *np, int index) +{ + struct qe_pin *qe_pin; + struct device_node *gc; + struct of_gpio_chip *of_gc = NULL; + struct of_mm_gpio_chip *mm_gc; + struct qe_gpio_chip *qe_gc; + int err; + int size; + const void *gpio_spec; + const u32 *gpio_cells; + unsigned long flags; + + qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL); + if (!qe_pin) { + pr_debug("%s: can't allocate memory\n", __func__); + return ERR_PTR(-ENOMEM); + } + + err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index, + &gc, &gpio_spec); + if (err) { + pr_debug("%s: can't parse gpios property\n", __func__); + goto err0; + } + + if (!of_device_is_compatible(gc, "fsl,mpc8323-qe-pario-bank")) { + pr_debug("%s: tried to get a non-qe pin\n", __func__); + err = -EINVAL; + goto err1; + } + + of_gc = gc->data; + if (!of_gc) { + pr_debug("%s: gpio controller %s isn't registered\n", + np->full_name, gc->full_name); + err = -ENODEV; + goto err1; + } + + gpio_cells = of_get_property(gc, "#gpio-cells", &size); + if (!gpio_cells || size != sizeof(*gpio_cells) || + *gpio_cells != of_gc->gpio_cells) { + pr_debug("%s: wrong #gpio-cells for %s\n", + np->full_name, gc->full_name); + err = -EINVAL; + goto err1; + } + + err = of_gc->xlate(of_gc, np, gpio_spec, NULL); + if (err < 0) + goto err1; + + mm_gc = to_of_mm_gpio_chip(&of_gc->gc); + qe_gc = to_qe_gpio_chip(mm_gc); + + spin_lock_irqsave(&qe_gc->lock, flags); + + if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) { + qe_pin->controller = qe_gc; + qe_pin->num = err; + err = 0; + } else { + err = -EBUSY; + } + + spin_unlock_irqrestore(&qe_gc->lock, flags); + + if (!err) + return qe_pin; +err1: + of_node_put(gc); +err0: + kfree(qe_pin); + pr_debug("%s failed with status %d\n", __func__, err); + return ERR_PTR(err); +} +EXPORT_SYMBOL(qe_pin_request); + +/** + * qe_pin_free - Free a pin + * @qe_pin: pointer to the qe_pin structure + * Context: any + * + * This function frees the qe_pin structure and makes a pin available + * for further qe_pin_request() calls. + */ +void qe_pin_free(struct qe_pin *qe_pin) +{ + struct qe_gpio_chip *qe_gc = qe_pin->controller; + unsigned long flags; + const int pin = qe_pin->num; + + spin_lock_irqsave(&qe_gc->lock, flags); + test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]); + spin_unlock_irqrestore(&qe_gc->lock, flags); + + kfree(qe_pin); +} +EXPORT_SYMBOL(qe_pin_free); + +/** + * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode + * @qe_pin: pointer to the qe_pin structure + * Context: any + * + * This function resets a pin to a dedicated peripheral function that + * has been set up by the firmware. + */ +void qe_pin_set_dedicated(struct qe_pin *qe_pin) +{ + struct qe_gpio_chip *qe_gc = qe_pin->controller; + struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs; + struct qe_pio_regs *sregs = &qe_gc->saved_regs; + int pin = qe_pin->num; + u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1)); + u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2); + bool second_reg = pin > (QE_PIO_PINS / 2) - 1; + unsigned long flags; + + spin_lock_irqsave(&qe_gc->lock, flags); + + if (second_reg) { + clrsetbits_be32(®s->cpdir2, mask2, sregs->cpdir2 & mask2); + clrsetbits_be32(®s->cppar2, mask2, sregs->cppar2 & mask2); + } else { + clrsetbits_be32(®s->cpdir1, mask2, sregs->cpdir1 & mask2); + clrsetbits_be32(®s->cppar1, mask2, sregs->cppar1 & mask2); + } + + if (sregs->cpdata & mask1) + qe_gc->cpdata |= mask1; + else + qe_gc->cpdata &= ~mask1; + + out_be32(®s->cpdata, qe_gc->cpdata); + clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1); + + spin_unlock_irqrestore(&qe_gc->lock, flags); +} +EXPORT_SYMBOL(qe_pin_set_dedicated); + +/** + * qe_pin_set_gpio - Set a pin to the GPIO mode + * @qe_pin: pointer to the qe_pin structure + * Context: any + * + * This function sets a pin to the GPIO mode. + */ +void qe_pin_set_gpio(struct qe_pin *qe_pin) +{ + struct qe_gpio_chip *qe_gc = qe_pin->controller; + struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs; + unsigned long flags; + + spin_lock_irqsave(&qe_gc->lock, flags); + + /* Let's make it input by default, GPIO API is able to change that. */ + __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0); + + spin_unlock_irqrestore(&qe_gc->lock, flags); +} +EXPORT_SYMBOL(qe_pin_set_gpio); + static int __init qe_add_gpiochips(void) { struct device_node *np; diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c new file mode 100644 index 0000000..43c4569 --- /dev/null +++ b/arch/powerpc/sysdev/simple_gpio.c @@ -0,0 +1,155 @@ +/* + * Simple Memory-Mapped GPIOs + * + * Copyright (c) MontaVista Software, Inc. 2008. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> +#include <asm/prom.h> +#include "simple_gpio.h" + +struct u8_gpio_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u8 data; +}; + +static struct u8_gpio_chip *to_u8_gpio_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct u8_gpio_chip, mm_gc); +} + +static u8 u8_pin2mask(unsigned int pin) +{ + return 1 << (8 - 1 - pin); +} + +static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + + return in_8(mm_gc->regs) & u8_pin2mask(gpio); +} + +static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc); + unsigned long flags; + + spin_lock_irqsave(&u8_gc->lock, flags); + + if (val) + u8_gc->data |= u8_pin2mask(gpio); + else + u8_gc->data &= ~u8_pin2mask(gpio); + + out_8(mm_gc->regs, u8_gc->data); + + spin_unlock_irqrestore(&u8_gc->lock, flags); +} + +static int u8_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + return 0; +} + +static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + u8_gpio_set(gc, gpio, val); + return 0; +} + +static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct u8_gpio_chip *u8_gc = to_u8_gpio_chip(mm_gc); + + u8_gc->data = in_8(mm_gc->regs); +} + +static int __init u8_simple_gpiochip_add(struct device_node *np) +{ + int ret; + struct u8_gpio_chip *u8_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL); + if (!u8_gc) + return -ENOMEM; + + spin_lock_init(&u8_gc->lock); + + mm_gc = &u8_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = u8_gpio_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 8; + gc->direction_input = u8_gpio_dir_in; + gc->direction_output = u8_gpio_dir_out; + gc->get = u8_gpio_get; + gc->set = u8_gpio_set; + + ret = of_mm_gpiochip_add(np, mm_gc); + if (ret) + goto err; + return 0; +err: + kfree(u8_gc); + return ret; +} + +void __init simple_gpiochip_init(const char *compatible) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, compatible) { + int ret; + struct resource r; + + ret = of_address_to_resource(np, 0, &r); + if (ret) + goto err; + + switch (resource_size(&r)) { + case 1: + ret = u8_simple_gpiochip_add(np); + if (ret) + goto err; + break; + default: + /* + * Whenever you need support for GPIO bank width > 1, + * please just turn u8_ code into huge macros, and + * construct needed uX_ code with it. + */ + ret = -ENOSYS; + goto err; + } + continue; +err: + pr_err("%s: registration failed, status %d\n", + np->full_name, ret); + } +} diff --git a/arch/powerpc/sysdev/simple_gpio.h b/arch/powerpc/sysdev/simple_gpio.h new file mode 100644 index 0000000..3a7b0c5 --- /dev/null +++ b/arch/powerpc/sysdev/simple_gpio.h @@ -0,0 +1,12 @@ +#ifndef __SYSDEV_SIMPLE_GPIO_H +#define __SYSDEV_SIMPLE_GPIO_H + +#include <linux/errno.h> + +#ifdef CONFIG_SIMPLE_GPIO +extern void simple_gpiochip_init(const char *compatible); +#else +static inline void simple_gpiochip_init(const char *compatible) {} +#endif /* CONFIG_SIMPLE_GPIO */ + +#endif /* __SYSDEV_SIMPLE_GPIO_H */ |