diff options
Diffstat (limited to 'arch/ppc64/kernel/prom_init.c')
| -rw-r--r-- | arch/ppc64/kernel/prom_init.c | 2051 |
1 files changed, 0 insertions, 2051 deletions
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c deleted file mode 100644 index 6375f40..0000000 --- a/arch/ppc64/kernel/prom_init.c +++ /dev/null @@ -1,2051 +0,0 @@ -/* - * - * - * Procedures for interfacing to Open Firmware. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. - * {engebret|bergner}@us.ibm.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG_PROM - -#include <stdarg.h> -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/proc_fs.h> -#include <linux/stringify.h> -#include <linux/delay.h> -#include <linux/initrd.h> -#include <linux/bitops.h> -#include <asm/prom.h> -#include <asm/rtas.h> -#include <asm/abs_addr.h> -#include <asm/page.h> -#include <asm/processor.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/pci.h> -#include <asm/iommu.h> -#include <asm/btext.h> -#include <asm/sections.h> -#include <asm/machdep.h> - -#ifdef CONFIG_LOGO_LINUX_CLUT224 -#include <linux/linux_logo.h> -extern const struct linux_logo logo_linux_clut224; -#endif - -/* - * Properties whose value is longer than this get excluded from our - * copy of the device tree. This value does need to be big enough to - * ensure that we don't lose things like the interrupt-map property - * on a PCI-PCI bridge. - */ -#define MAX_PROPERTY_LENGTH (1UL * 1024 * 1024) - -/* - * Eventually bump that one up - */ -#define DEVTREE_CHUNK_SIZE 0x100000 - -/* - * This is the size of the local memory reserve map that gets copied - * into the boot params passed to the kernel. That size is totally - * flexible as the kernel just reads the list until it encounters an - * entry with size 0, so it can be changed without breaking binary - * compatibility - */ -#define MEM_RESERVE_MAP_SIZE 8 - -/* - * prom_init() is called very early on, before the kernel text - * and data have been mapped to KERNELBASE. At this point the code - * is running at whatever address it has been loaded at, so - * references to extern and static variables must be relocated - * explicitly. The procedure reloc_offset() returns the address - * we're currently running at minus the address we were linked at. - * (Note that strings count as static variables.) - * - * Because OF may have mapped I/O devices into the area starting at - * KERNELBASE, particularly on CHRP machines, we can't safely call - * OF once the kernel has been mapped to KERNELBASE. Therefore all - * OF calls should be done within prom_init(), and prom_init() - * and all routines called within it must be careful to relocate - * references as necessary. - * - * Note that the bss is cleared *after* prom_init runs, so we have - * to make sure that any static or extern variables it accesses - * are put in the data segment. - */ - - -#define PROM_BUG() do { \ - prom_printf("kernel BUG at %s line 0x%x!\n", \ - RELOC(__FILE__), __LINE__); \ - __asm__ __volatile__(".long " BUG_ILLEGAL_INSTR); \ -} while (0) - -#ifdef DEBUG_PROM -#define prom_debug(x...) prom_printf(x) -#else -#define prom_debug(x...) -#endif - - -typedef u32 prom_arg_t; - -struct prom_args { - u32 service; - u32 nargs; - u32 nret; - prom_arg_t args[10]; - prom_arg_t *rets; /* Pointer to return values in args[16]. */ -}; - -struct prom_t { - unsigned long entry; - ihandle root; - ihandle chosen; - int cpu; - ihandle stdout; - ihandle disp_node; - struct prom_args args; - unsigned long version; - unsigned long root_size_cells; - unsigned long root_addr_cells; -}; - -struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; -}; - -struct mem_map_entry { - u64 base; - u64 size; -}; - -typedef u32 cell_t; - -extern void __start(unsigned long r3, unsigned long r4, unsigned long r5); - -extern void enter_prom(struct prom_args *args, unsigned long entry); -extern void copy_and_flush(unsigned long dest, unsigned long src, - unsigned long size, unsigned long offset); - -extern unsigned long klimit; - -/* prom structure */ -static struct prom_t __initdata prom; - -#define PROM_SCRATCH_SIZE 256 - -static char __initdata of_stdout_device[256]; -static char __initdata prom_scratch[PROM_SCRATCH_SIZE]; - -static unsigned long __initdata dt_header_start; -static unsigned long __initdata dt_struct_start, dt_struct_end; -static unsigned long __initdata dt_string_start, dt_string_end; - -static unsigned long __initdata prom_initrd_start, prom_initrd_end; - -static int __initdata iommu_force_on; -static int __initdata ppc64_iommu_off; -static int __initdata of_platform; - -static char __initdata prom_cmd_line[COMMAND_LINE_SIZE]; - -static unsigned long __initdata prom_memory_limit; -static unsigned long __initdata prom_tce_alloc_start; -static unsigned long __initdata prom_tce_alloc_end; - -static unsigned long __initdata alloc_top; -static unsigned long __initdata alloc_top_high; -static unsigned long __initdata alloc_bottom; -static unsigned long __initdata rmo_top; -static unsigned long __initdata ram_top; - -static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE]; -static int __initdata mem_reserve_cnt; - -static cell_t __initdata regbuf[1024]; - - -#define MAX_CPU_THREADS 2 - -/* TO GO */ -#ifdef CONFIG_HMT -struct { - unsigned int pir; - unsigned int threadid; -} hmt_thread_data[NR_CPUS]; -#endif /* CONFIG_HMT */ - -/* - * This are used in calls to call_prom. The 4th and following - * arguments to call_prom should be 32-bit values. 64 bit values - * are truncated to 32 bits (and fortunately don't get interpreted - * as two arguments). - */ -#define ADDR(x) (u32) ((unsigned long)(x) - offset) - -/* - * Error results ... some OF calls will return "-1" on error, some - * will return 0, some will return either. To simplify, here are - * macros to use with any ihandle or phandle return value to check if - * it is valid - */ - -#define PROM_ERROR (-1u) -#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR) -#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR) - - -/* This is the one and *ONLY* place where we actually call open - * firmware from, since we need to make sure we're running in 32b - * mode when we do. We switch back to 64b mode upon return. - */ - -static int __init call_prom(const char *service, int nargs, int nret, ...) -{ - int i; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - va_list list; - - _prom->args.service = ADDR(service); - _prom->args.nargs = nargs; - _prom->args.nret = nret; - _prom->args.rets = (prom_arg_t *)&(_prom->args.args[nargs]); - - va_start(list, nret); - for (i=0; i < nargs; i++) - _prom->args.args[i] = va_arg(list, prom_arg_t); - va_end(list); - - for (i=0; i < nret ;i++) - _prom->args.rets[i] = 0; - - enter_prom(&_prom->args, _prom->entry); - - return (nret > 0) ? _prom->args.rets[0] : 0; -} - - -static unsigned int __init prom_claim(unsigned long virt, unsigned long size, - unsigned long align) -{ - return (unsigned int)call_prom("claim", 3, 1, - (prom_arg_t)virt, (prom_arg_t)size, - (prom_arg_t)align); -} - -static void __init prom_print(const char *msg) -{ - const char *p, *q; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - if (_prom->stdout == 0) - return; - - for (p = msg; *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, _prom->stdout, p, q - p); - if (*q == 0) - break; - ++q; - call_prom("write", 3, 1, _prom->stdout, ADDR("\r\n"), 2); - } -} - - -static void __init prom_print_hex(unsigned long val) -{ - unsigned long offset = reloc_offset(); - int i, nibbles = sizeof(val)*2; - char buf[sizeof(val)*2+1]; - struct prom_t *_prom = PTRRELOC(&prom); - - for (i = nibbles-1; i >= 0; i--) { - buf[i] = (val & 0xf) + '0'; - if (buf[i] > '9') - buf[i] += ('a'-'0'-10); - val >>= 4; - } - buf[nibbles] = '\0'; - call_prom("write", 3, 1, _prom->stdout, buf, nibbles); -} - - -static void __init prom_printf(const char *format, ...) -{ - unsigned long offset = reloc_offset(); - const char *p, *q, *s; - va_list args; - unsigned long v; - struct prom_t *_prom = PTRRELOC(&prom); - - va_start(args, format); - for (p = PTRRELOC(format); *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, _prom->stdout, p, q - p); - if (*q == 0) - break; - if (*q == '\n') { - ++q; - call_prom("write", 3, 1, _prom->stdout, - ADDR("\r\n"), 2); - continue; - } - ++q; - if (*q == 0) - break; - switch (*q) { - case 's': - ++q; - s = va_arg(args, const char *); - prom_print(s); - break; - case 'x': - ++q; - v = va_arg(args, unsigned long); - prom_print_hex(v); - break; - } - } -} - - -static void __init __attribute__((noreturn)) prom_panic(const char *reason) -{ - unsigned long offset = reloc_offset(); - - prom_print(PTRRELOC(reason)); - /* ToDo: should put up an SRC here */ - call_prom("exit", 0, 0); - - for (;;) /* should never get here */ - ; -} - - -static int __init prom_next_node(phandle *nodep) -{ - phandle node; - - if ((node = *nodep) != 0 - && (*nodep = call_prom("child", 1, 1, node)) != 0) - return 1; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - for (;;) { - if ((node = call_prom("parent", 1, 1, node)) == 0) - return 0; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - } -} - -static int __init prom_getprop(phandle node, const char *pname, - void *value, size_t valuelen) -{ - unsigned long offset = reloc_offset(); - - return call_prom("getprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); -} - -static int __init prom_getproplen(phandle node, const char *pname) -{ - unsigned long offset = reloc_offset(); - - return call_prom("getproplen", 2, 1, node, ADDR(pname)); -} - -static int __init prom_setprop(phandle node, const char *pname, - void *value, size_t valuelen) -{ - unsigned long offset = reloc_offset(); - - return call_prom("setprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); -} - -/* We can't use the standard versions because of RELOC headaches. */ -#define isxdigit(c) (('0' <= (c) && (c) <= '9') \ - || ('a' <= (c) && (c) <= 'f') \ - || ('A' <= (c) && (c) <= 'F')) - -#define isdigit(c) ('0' <= (c) && (c) <= '9') -#define islower(c) ('a' <= (c) && (c) <= 'z') -#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c)) - -unsigned long prom_strtoul(const char *cp, const char **endp) -{ - unsigned long result = 0, base = 10, value; - - if (*cp == '0') { - base = 8; - cp++; - if (toupper(*cp) == 'X') { - cp++; - base = 16; - } - } - - while (isxdigit(*cp) && - (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) { - result = result * base + value; - cp++; - } - - if (endp) - *endp = cp; - - return result; -} - -unsigned long prom_memparse(const char *ptr, const char **retptr) -{ - unsigned long ret = prom_strtoul(ptr, retptr); - int shift = 0; - - /* - * We can't use a switch here because GCC *may* generate a - * jump table which won't work, because we're not running at - * the address we're linked at. - */ - if ('G' == **retptr || 'g' == **retptr) - shift = 30; - - if ('M' == **retptr || 'm' == **retptr) - shift = 20; - - if ('K' == **retptr || 'k' == **retptr) - shift = 10; - - if (shift) { - ret <<= shift; - (*retptr)++; - } - - return ret; -} - -/* - * Early parsing of the command line passed to the kernel, used for - * "mem=x" and the options that affect the iommu - */ -static void __init early_cmdline_parse(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char *opt, *p; - int l = 0; - - RELOC(prom_cmd_line[0]) = 0; - p = RELOC(prom_cmd_line); - if ((long)_prom->chosen > 0) - l = prom_getprop(_prom->chosen, "bootargs", p, COMMAND_LINE_SIZE-1); -#ifdef CONFIG_CMDLINE - if (l == 0) /* dbl check */ - strlcpy(RELOC(prom_cmd_line), - RELOC(CONFIG_CMDLINE), sizeof(prom_cmd_line)); -#endif /* CONFIG_CMDLINE */ - prom_printf("command line: %s\n", RELOC(prom_cmd_line)); - - opt = strstr(RELOC(prom_cmd_line), RELOC("iommu=")); - if (opt) { - prom_printf("iommu opt is: %s\n", opt); - opt += 6; - while (*opt && *opt == ' ') - opt++; - if (!strncmp(opt, RELOC("off"), 3)) - RELOC(ppc64_iommu_off) = 1; - else if (!strncmp(opt, RELOC("force"), 5)) - RELOC(iommu_force_on) = 1; - } - - opt = strstr(RELOC(prom_cmd_line), RELOC("mem=")); - if (opt) { - opt += 4; - RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt); - /* Align to 16 MB == size of large page */ - RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000); - } -} - -/* - * To tell the firmware what our capabilities are, we have to pass - * it a fake 32-bit ELF header containing a couple of PT_NOTE sections - * that contain structures that contain the actual values. - */ -static struct fake_elf { - Elf32_Ehdr elfhdr; - Elf32_Phdr phdr[2]; - struct chrpnote { - u32 namesz; - u32 descsz; - u32 type; - char name[8]; /* "PowerPC" */ - struct chrpdesc { - u32 real_mode; - u32 real_base; - u32 real_size; - u32 virt_base; - u32 virt_size; - u32 load_base; - } chrpdesc; - } chrpnote; - struct rpanote { - u32 namesz; - u32 descsz; - u32 type; - char name[24]; /* "IBM,RPA-Client-Config" */ - struct rpadesc { - u32 lpar_affinity; - u32 min_rmo_size; - u32 min_rmo_percent; - u32 max_pft_size; - u32 splpar; - u32 min_load; - u32 new_mem_def; - u32 ignore_me; - } rpadesc; - } rpanote; -} fake_elf = { - .elfhdr = { - .e_ident = { 0x7f, 'E', 'L', 'F', - ELFCLASS32, ELFDATA2MSB, EV_CURRENT }, - .e_type = ET_EXEC, /* yeah right */ - .e_machine = EM_PPC, - .e_version = EV_CURRENT, - .e_phoff = offsetof(struct fake_elf, phdr), - .e_phentsize = sizeof(Elf32_Phdr), - .e_phnum = 2 - }, - .phdr = { - [0] = { - .p_type = PT_NOTE, - .p_offset = offsetof(struct fake_elf, chrpnote), - .p_filesz = sizeof(struct chrpnote) - }, [1] = { - .p_type = PT_NOTE, - .p_offset = offsetof(struct fake_elf, rpanote), - .p_filesz = sizeof(struct rpanote) - } - }, - .chrpnote = { - .namesz = sizeof("PowerPC"), - .descsz = sizeof(struct chrpdesc), - .type = 0x1275, - .name = "PowerPC", - .chrpdesc = { - .real_mode = ~0U, /* ~0 means "don't care" */ - .real_base = ~0U, - .real_size = ~0U, - .virt_base = ~0U, - .virt_size = ~0U, - .load_base = ~0U - }, - }, - .rpanote = { - .namesz = sizeof("IBM,RPA-Client-Config"), - .descsz = sizeof(struct rpadesc), - .type = 0x12759999, - .name = "IBM,RPA-Client-Config", - .rpadesc = { - .lpar_affinity = 0, - .min_rmo_size = 64, /* in megabytes */ - .min_rmo_percent = 0, - .max_pft_size = 48, /* 2^48 bytes max PFT size */ - .splpar = 1, - .min_load = ~0U, - .new_mem_def = 0 - } - } -}; - -static void __init prom_send_capabilities(void) -{ - unsigned long offset = reloc_offset(); - ihandle elfloader; - - elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); - if (elfloader == 0) { - prom_printf("couldn't open /packages/elf-loader\n"); - return; - } - call_prom("call-method", 3, 1, ADDR("process-elf-header"), - elfloader, ADDR(&fake_elf)); - call_prom("close", 1, 0, elfloader); -} - -/* - * Memory allocation strategy... our layout is normally: - * - * at 14Mb or more we vmlinux, then a gap and initrd. In some rare cases, initrd - * might end up beeing before the kernel though. We assume this won't override - * the final kernel at 0, we have no provision to handle that in this version, - * but it should hopefully never happen. - * - * alloc_top is set to the top of RMO, eventually shrink down if the TCEs overlap - * alloc_bottom is set to the top of kernel/initrd - * - * from there, allocations are done that way : rtas is allocated topmost, and - * the device-tree is allocated from the bottom. We try to grow the device-tree - * allocation as we progress. If we can't, then we fail, we don't currently have - * a facility to restart elsewhere, but that shouldn't be necessary neither - * - * Note that calls to reserve_mem have to be done explicitely, memory allocated - * with either alloc_up or alloc_down isn't automatically reserved. - */ - - -/* - * Allocates memory in the RMO upward from the kernel/initrd - * - * When align is 0, this is a special case, it means to allocate in place - * at the current location of alloc_bottom or fail (that is basically - * extending the previous allocation). Used for the device-tree flattening - */ -static unsigned long __init alloc_up(unsigned long size, unsigned long align) -{ - unsigned long offset = reloc_offset(); - unsigned long base = _ALIGN_UP(RELOC(alloc_bottom), align); - unsigned long addr = 0; - - prom_debug("alloc_up(%x, %x)\n", size, align); - if (RELOC(ram_top) == 0) - prom_panic("alloc_up() called with mem not initialized\n"); - - if (align) - base = _ALIGN_UP(RELOC(alloc_bottom), align); - else - base = RELOC(alloc_bottom); - - for(; (base + size) <= RELOC(alloc_top); - base = _ALIGN_UP(base + 0x100000, align)) { - prom_debug(" trying: 0x%x\n\r", base); - addr = (unsigned long)prom_claim(base, size, 0); - if (addr != PROM_ERROR) - break; - addr = 0; - if (align == 0) - break; - } - if (addr == 0) - return 0; - RELOC(alloc_bottom) = addr; - - prom_debug(" -> %x\n", addr); - prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_debug(" alloc_top : %x\n", RELOC(alloc_top)); - prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_debug(" rmo_top : %x\n", RELOC(rmo_top)); - prom_debug(" ram_top : %x\n", RELOC(ram_top)); - - return addr; -} - -/* - * Allocates memory downard, either from top of RMO, or if highmem - * is set, from the top of RAM. Note that this one doesn't handle - * failures. In does claim memory if highmem is not set. - */ -static unsigned long __init alloc_down(unsigned long size, unsigned long align, - int highmem) -{ - unsigned long offset = reloc_offset(); - unsigned long base, addr = 0; - - prom_debug("alloc_down(%x, %x, %s)\n", size, align, - highmem ? RELOC("(high)") : RELOC("(low)")); - if (RELOC(ram_top) == 0) - prom_panic("alloc_down() called with mem not initialized\n"); - - if (highmem) { - /* Carve out storage for the TCE table. */ - addr = _ALIGN_DOWN(RELOC(alloc_top_high) - size, align); - if (addr <= RELOC(alloc_bottom)) - return 0; - else { - /* Will we bump into the RMO ? If yes, check out that we - * didn't overlap existing allocations there, if we did, - * we are dead, we must be the first in town ! - */ - if (addr < RELOC(rmo_top)) { - /* Good, we are first */ - if (RELOC(alloc_top) == RELOC(rmo_top)) - RELOC(alloc_top) = RELOC(rmo_top) = addr; - else - return 0; - } - RELOC(alloc_top_high) = addr; - } - goto bail; - } - - base = _ALIGN_DOWN(RELOC(alloc_top) - size, align); - for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) { - prom_debug(" trying: 0x%x\n\r", base); - addr = (unsigned long)prom_claim(base, size, 0); - if (addr != PROM_ERROR) - break; - addr = 0; - } - if (addr == 0) - return 0; - RELOC(alloc_top) = addr; - - bail: - prom_debug(" -> %x\n", addr); - prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_debug(" alloc_top : %x\n", RELOC(alloc_top)); - prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_debug(" rmo_top : %x\n", RELOC(rmo_top)); - prom_debug(" ram_top : %x\n", RELOC(ram_top)); - - return addr; -} - -/* - * Parse a "reg" cell - */ -static unsigned long __init prom_next_cell(int s, cell_t **cellp) -{ - cell_t *p = *cellp; - unsigned long r = 0; - - /* Ignore more than 2 cells */ - while (s > 2) { - p++; - s--; - } - while (s) { - r <<= 32; - r |= *(p++); - s--; - } - - *cellp = p; - return r; -} - -/* - * Very dumb function for adding to the memory reserve list, but - * we don't need anything smarter at this point - * - * XXX Eventually check for collisions. They should NEVER happen - * if problems seem to show up, it would be a good start to track - * them down. - */ -static void reserve_mem(unsigned long base, unsigned long size) -{ - unsigned long offset = reloc_offset(); - unsigned long top = base + size; - unsigned long cnt = RELOC(mem_reserve_cnt); - - if (size == 0) - return; - - /* We need to always keep one empty entry so that we - * have our terminator with "size" set to 0 since we are - * dumb and just copy this entire array to the boot params - */ - base = _ALIGN_DOWN(base, PAGE_SIZE); - top = _ALIGN_UP(top, PAGE_SIZE); - size = top - base; - - if (cnt >= (MEM_RESERVE_MAP_SIZE - 1)) - prom_panic("Memory reserve map exhausted !\n"); - RELOC(mem_reserve_map)[cnt].base = base; - RELOC(mem_reserve_map)[cnt].size = size; - RELOC(mem_reserve_cnt) = cnt + 1; -} - -/* - * Initialize memory allocation mecanism, parse "memory" nodes and - * obtain that way the top of memory and RMO to setup out local allocator - */ -static void __init prom_init_mem(void) -{ - phandle node; - char *path, type[64]; - unsigned int plen; - cell_t *p, *endp; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - /* - * We iterate the memory nodes to find - * 1) top of RMO (first node) - * 2) top of memory - */ - prom_debug("root_addr_cells: %x\n", (long)_prom->root_addr_cells); - prom_debug("root_size_cells: %x\n", (long)_prom->root_size_cells); - - prom_debug("scanning memory:\n"); - path = RELOC(prom_scratch); - - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - prom_getprop(node, "device_type", type, sizeof(type)); - - if (strcmp(type, RELOC("memory"))) - continue; - - plen = prom_getprop(node, "reg", RELOC(regbuf), sizeof(regbuf)); - if (plen > sizeof(regbuf)) { - prom_printf("memory node too large for buffer !\n"); - plen = sizeof(regbuf); - } - p = RELOC(regbuf); - endp = p + (plen / sizeof(cell_t)); - -#ifdef DEBUG_PROM - memset(path, 0, PROM_SCRATCH_SIZE); - call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1); - prom_debug(" node %s :\n", path); -#endif /* DEBUG_PROM */ - - while ((endp - p) >= (_prom->root_addr_cells + _prom->root_size_cells)) { - unsigned long base, size; - - base = prom_next_cell(_prom->root_addr_cells, &p); - size = prom_next_cell(_prom->root_size_cells, &p); - - if (size == 0) - continue; - prom_debug(" %x %x\n", base, size); - if (base == 0) - RELOC(rmo_top) = size; - if ((base + size) > RELOC(ram_top)) - RELOC(ram_top) = base + size; - } - } - - RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(klimit) - offset + 0x4000); - - /* Check if we have an initrd after the kernel, if we do move our bottom - * point to after it - */ - if (RELOC(prom_initrd_start)) { - if (RELOC(prom_initrd_end) > RELOC(alloc_bottom)) - RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end)); - } - - /* - * If prom_memory_limit is set we reduce the upper limits *except* for - * alloc_top_high. This must be the real top of RAM so we can put - * TCE's up there. - */ - - RELOC(alloc_top_high) = RELOC(ram_top); - - if (RELOC(prom_memory_limit)) { - if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) { - prom_printf("Ignoring mem=%x <= alloc_bottom.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) { - prom_printf("Ignoring mem=%x >= ram_top.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else { - RELOC(ram_top) = RELOC(prom_memory_limit); - RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit)); - } - } - - /* - * Setup our top alloc point, that is top of RMO or top of - * segment 0 when running non-LPAR. - */ - if ( RELOC(of_platform) == PLATFORM_PSERIES_LPAR ) - RELOC(alloc_top) = RELOC(rmo_top); - else - /* Some RS64 machines have buggy firmware where claims up at 1GB - * fails. Cap at 768MB as a workaround. Still plenty of room. - */ - RELOC(alloc_top) = RELOC(rmo_top) = min(0x30000000ul, RELOC(ram_top)); - - prom_printf("memory layout at init:\n"); - prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); - prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_printf(" alloc_top : %x\n", RELOC(alloc_top)); - prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_printf(" rmo_top : %x\n", RELOC(rmo_top)); - prom_printf(" ram_top : %x\n", RELOC(ram_top)); -} - - -/* - * Allocate room for and instanciate RTAS - */ -static void __init prom_instantiate_rtas(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - phandle rtas_node; - ihandle rtas_inst; - u32 base, entry = 0; - u32 size = 0; - - prom_debug("prom_instantiate_rtas: start...\n"); - - rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); - prom_debug("rtas_node: %x\n", rtas_node); - if (!PHANDLE_VALID(rtas_node)) - return; - - prom_getprop(rtas_node, "rtas-size", &size, sizeof(size)); - if (size == 0) - return; - - base = alloc_down(size, PAGE_SIZE, 0); - if (base == 0) { - prom_printf("RTAS allocation failed !\n"); - return; - } - - rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); - if (!IHANDLE_VALID(rtas_inst)) { - prom_printf("opening rtas package failed"); - return; - } - - prom_printf("instantiating rtas at 0x%x ...", base); - - if (call_prom("call-method", 3, 2, - ADDR("instantiate-rtas"), - rtas_inst, base) != PROM_ERROR) { - entry = (long)_prom->args.rets[1]; - } - if (entry == 0) { - prom_printf(" failed\n"); - return; - } - prom_printf(" done\n"); - - reserve_mem(base, size); - - prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); - - prom_debug("rtas base = 0x%x\n", base); - prom_debug("rtas entry = 0x%x\n", entry); - prom_debug("rtas size = 0x%x\n", (long)size); - - prom_debug("prom_instantiate_rtas: end...\n"); -} - - -/* - * Allocate room for and initialize TCE tables - */ -static void __init prom_initialize_tce_table(void) -{ - phandle node; - ihandle phb_node; - unsigned long offset = reloc_offset(); - char compatible[64], type[64], model[64]; - char *path = RELOC(prom_scratch); - u64 base, align; - u32 minalign, minsize; - u64 tce_entry, *tce_entryp; - u64 local_alloc_top, local_alloc_bottom; - u64 i; - - if (RELOC(ppc64_iommu_off)) - return; - - prom_debug("starting prom_initialize_tce_table\n"); - - /* Cache current top of allocs so we reserve a single block */ - local_alloc_top = RELOC(alloc_top_high); - local_alloc_bottom = local_alloc_top; - - /* Search all nodes looking for PHBs. */ - for (node = 0; prom_next_node(&node); ) { - compatible[0] = 0; - type[0] = 0; - model[0] = 0; - prom_getprop(node, "compatible", - compatible, sizeof(compatible)); - prom_getprop(node, "device_type", type, sizeof(type)); - prom_getprop(node, "model", model, sizeof(model)); - - if ((type[0] == 0) || (strstr(type, RELOC("pci")) == NULL)) - continue; - - /* Keep the old logic in tack to avoid regression. */ - if (compatible[0] != 0) { - if ((strstr(compatible, RELOC("python")) == NULL) && - (strstr(compatible, RELOC("Speedwagon")) == NULL) && - (strstr(compatible, RELOC("Winnipeg")) == NULL)) - continue; - } else if (model[0] != 0) { - if ((strstr(model, RELOC("ython")) == NULL) && - (strstr(model, RELOC("peedwagon")) == NULL) && - (strstr(model, RELOC("innipeg")) == NULL)) - continue; - } - - if (prom_getprop(node, "tce-table-minalign", &minalign, - sizeof(minalign)) == PROM_ERROR) - minalign = 0; - if (prom_getprop(node, "tce-table-minsize", &minsize, - sizeof(minsize)) == PROM_ERROR) - minsize = 4UL << 20; - - /* - * Even though we read what OF wants, we just set the table - * size to 4 MB. This is enough to map 2GB of PCI DMA space. - * By doing this, we avoid the pitfalls of trying to DMA to - * MMIO space and the DMA alias hole. - * - * On POWER4, firmware sets the TCE region by assuming - * each TCE table is 8MB. Using this memory for anything - * else will impact performance, so we always allocate 8MB. - * Anton - */ - if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p)) - minsize = 8UL << 20; - else - minsize = 4UL << 20; - - /* Align to the greater of the align or size */ - align = max(minalign, minsize); - base = alloc_down(minsize, align, 1); - if (base == 0) - prom_panic("ERROR, cannot find space for TCE table.\n"); - if (base < local_alloc_bottom) - local_alloc_bottom = base; - - /* Save away the TCE table attributes for later use. */ - prom_setprop(node, "linux,tce-base", &base, sizeof(base)); - prom_setprop(node, "linux,tce-size", &minsize, sizeof(minsize)); - - /* It seems OF doesn't null-terminate the path :-( */ - memset(path, 0, sizeof(path)); - /* Call OF to setup the TCE hardware */ - if (call_prom("package-to-path", 3, 1, node, - path, PROM_SCRATCH_SIZE-1) == PROM_ERROR) { - prom_printf("package-to-path failed\n"); - } - - prom_debug("TCE table: %s\n", path); - prom_debug("\tnode = 0x%x\n", node); - prom_debug("\tbase = 0x%x\n", base); - prom_debug("\tsize = 0x%x\n", minsize); - - /* Initialize the table to have a one-to-one mapping - * over the allocated size. - */ - tce_entryp = (unsigned long *)base; - for (i = 0; i < (minsize >> 3) ;tce_entryp++, i++) { - tce_entry = (i << PAGE_SHIFT); - tce_entry |= 0x3; - *tce_entryp = tce_entry; - } - - prom_printf("opening PHB %s", path); - phb_node = call_prom("open", 1, 1, path); - if (phb_node == 0) - prom_printf("... failed\n"); - else - prom_printf("... done\n"); - - call_prom("call-method", 6, 0, ADDR("set-64-bit-addressing"), - phb_node, -1, minsize, - (u32) base, (u32) (base >> 32)); - call_prom("close", 1, 0, phb_node); - } - - reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom); - - if (RELOC(prom_memory_limit)) { - /* - * We align the start to a 16MB boundary so we can map the TCE area - * using large pages if possible. The end should be the top of RAM - * so no need to align it. - */ - RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom, 0x1000000); - RELOC(prom_tce_alloc_end) = local_alloc_top; - } - - /* Flag the first invalid entry */ - prom_debug("ending prom_initialize_tce_table\n"); -} - -/* - * With CHRP SMP we need to use the OF to start the other - * processors so we can't wait until smp_boot_cpus (the OF is - * trashed by then) so we have to put the processors into - * a holding pattern controlled by the kernel (not OF) before - * we destroy the OF. - * - * This uses a chunk of low memory, puts some holding pattern - * code there and sends the other processors off to there until - * smp_boot_cpus tells them to do something. The holding pattern - * checks that address until its cpu # is there, when it is that - * cpu jumps to __secondary_start(). smp_boot_cpus() takes care - * of setting those values. - * - * We also use physical address 0x4 here to tell when a cpu - * is in its holding pattern code. - * - * Fixup comment... DRENG / PPPBBB - Peter - * - * -- Cort - */ -static void __init prom_hold_cpus(void) -{ - unsigned long i; - unsigned int reg; - phandle node; - unsigned long offset = reloc_offset(); - char type[64]; - int cpuid = 0; - unsigned int interrupt_server[MAX_CPU_THREADS]; - unsigned int cpu_threads, hw_cpu_num; - int propsize; - extern void __secondary_hold(void); - extern unsigned long __secondary_hold_spinloop; - extern unsigned long __secondary_hold_acknowledge; - unsigned long *spinloop - = (void *)virt_to_abs(&__secondary_hold_spinloop); - unsigned long *acknowledge - = (void *)virt_to_abs(&__secondary_hold_acknowledge); - unsigned long secondary_hold - = virt_to_abs(*PTRRELOC((unsigned long *)__secondary_hold)); - struct prom_t *_prom = PTRRELOC(&prom); - - prom_debug("prom_hold_cpus: start...\n"); - prom_debug(" 1) spinloop = 0x%x\n", (unsigned long)spinloop); - prom_debug(" 1) *spinloop = 0x%x\n", *spinloop); - prom_debug(" 1) acknowledge = 0x%x\n", - (unsigned long)acknowledge); - prom_debug(" 1) *acknowledge = 0x%x\n", *acknowledge); - prom_debug(" 1) secondary_hold = 0x%x\n", secondary_hold); - - /* Set the common spinloop variable, so all of the secondary cpus - * will block when they are awakened from their OF spinloop. - * This must occur for both SMP and non SMP kernels, since OF will - * be trashed when we move the kernel. - */ - *spinloop = 0; - -#ifdef CONFIG_HMT - for (i=0; i < NR_CPUS; i++) { - RELOC(hmt_thread_data)[i].pir = 0xdeadbeef; - } -#endif - /* look for cpus */ - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("cpu")) != 0) - continue; - - /* Skip non-configured cpus. */ - if (prom_getprop(node, "status", type, sizeof(type)) > 0) - if (strcmp(type, RELOC("okay")) != 0) - continue; - - reg = -1; - prom_getprop(node, "reg", ®, sizeof(reg)); - - prom_debug("\ncpuid = 0x%x\n", cpuid); - prom_debug("cpu hw idx = 0x%x\n", reg); - - /* Init the acknowledge var which will be reset by - * the secondary cpu when it awakens from its OF - * spinloop. - */ - *acknowledge = (unsigned long)-1; - - propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s", - &interrupt_server, - sizeof(interrupt_server)); - if (propsize < 0) { - /* no property. old hardware has no SMT */ - cpu_threads = 1; - interrupt_server[0] = reg; /* fake it with phys id */ - } else { - /* We have a threaded processor */ - cpu_threads = propsize / sizeof(u32); - if (cpu_threads > MAX_CPU_THREADS) { - prom_printf("SMT: too many threads!\n" - "SMT: found %x, max is %x\n", - cpu_threads, MAX_CPU_THREADS); - cpu_threads = 1; /* ToDo: panic? */ - } - } - - hw_cpu_num = interrupt_server[0]; - if (hw_cpu_num != _prom->cpu) { - /* Primary Thread of non-boot cpu */ - prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg); - call_prom("start-cpu", 3, 0, node, - secondary_hold, reg); - - for ( i = 0 ; (i < 100000000) && - (*acknowledge == ((unsigned long)-1)); i++ ) - mb(); - - if (*acknowledge == reg) { - prom_printf("done\n"); - /* We have to get every CPU out of OF, - * even if we never start it. */ - if (cpuid >= NR_CPUS) - goto next; - } else { - prom_printf("failed: %x\n", *acknowledge); - } - } -#ifdef CONFIG_SMP - else - prom_printf("%x : boot cpu %x\n", cpuid, reg); -#endif -next: -#ifdef CONFIG_SMP - /* Init paca for secondary threads. They start later. */ - for (i=1; i < cpu_threads; i++) { - cpuid++; - if (cpuid >= NR_CPUS) - continue; - } -#endif /* CONFIG_SMP */ - cpuid++; - } -#ifdef CONFIG_HMT - /* Only enable HMT on processors that provide support. */ - if (__is_processor(PV_PULSAR) || - __is_processor(PV_ICESTAR) || - __is_processor(PV_SSTAR)) { - prom_printf(" starting secondary threads\n"); - - for (i = 0; i < NR_CPUS; i += 2) { - if (!cpu_online(i)) - continue; - - if (i == 0) { - unsigned long pir = mfspr(SPRN_PIR); - if (__is_processor(PV_PULSAR)) { - RELOC(hmt_thread_data)[i].pir = - pir & 0x1f; - } else { - RELOC(hmt_thread_data)[i].pir = - pir & 0x3ff; - } - } - } - } else { - prom_printf("Processor is not HMT capable\n"); - } -#endif - - if (cpuid > NR_CPUS) - prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS) - ") exceeded: ignoring extras\n"); - - prom_debug("prom_hold_cpus: end...\n"); -} - - -static void __init prom_init_client_services(unsigned long pp) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - /* Get a handle to the prom entry point before anything else */ - _prom->entry = pp; - - /* Init default value for phys size */ - _prom->root_size_cells = 1; - _prom->root_addr_cells = 2; - - /* get a handle for the stdout device */ - _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); - if (!PHANDLE_VALID(_prom->chosen)) - prom_panic("cannot find chosen"); /* msg won't be printed :( */ - - /* get device tree root */ - _prom->root = call_prom("finddevice", 1, 1, ADDR("/")); - if (!PHANDLE_VALID(_prom->root)) - prom_panic("cannot find device tree root"); /* msg won't be printed :( */ -} - -static void __init prom_init_stdout(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char *path = RELOC(of_stdout_device); - char type[16]; - u32 val; - - if (prom_getprop(_prom->chosen, "stdout", &val, sizeof(val)) <= 0) - prom_panic("cannot find stdout"); - - _prom->stdout = val; - - /* Get the full OF pathname of the stdout device */ - memset(path, 0, 256); - call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255); - val = call_prom("instance-to-package", 1, 1, _prom->stdout); - prom_setprop(_prom->chosen, "linux,stdout-package", &val, sizeof(val)); - prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device)); - prom_setprop(_prom->chosen, "linux,stdout-path", - RELOC(of_stdout_device), strlen(RELOC(of_stdout_device))+1); - - /* If it's a display, note it */ - memset(type, 0, sizeof(type)); - prom_getprop(val, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("display")) == 0) { - _prom->disp_node = val; - prom_setprop(val, "linux,boot-display", NULL, 0); - } -} - -static void __init prom_close_stdin(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - ihandle val; - - if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0) - call_prom("close", 1, 0, val); -} - -static int __init prom_find_machine_type(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char compat[256]; - int len, i = 0; - phandle rtas; - - len = prom_getprop(_prom->root, "compatible", - compat, sizeof(compat)-1); - if (len > 0) { - compat[len] = 0; - while (i < len) { - char *p = &compat[i]; - int sl = strlen(p); - if (sl == 0) - break; - if (strstr(p, RELOC("Power Macintosh")) || - strstr(p, RELOC("MacRISC4"))) - return PLATFORM_POWERMAC; - if (strstr(p, RELOC("Momentum,Maple"))) - return PLATFORM_MAPLE; - i += sl + 1; - } - } - /* Default to pSeries. We need to know if we are running LPAR */ - rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (PHANDLE_VALID(rtas)) { - int x = prom_getproplen(rtas, "ibm,hypertas-functions"); - if (x != PROM_ERROR) { - prom_printf("Hypertas detected, assuming LPAR !\n"); - return PLATFORM_PSERIES_LPAR; - } - } - return PLATFORM_PSERIES; -} - -static int __init prom_set_color(ihandle ih, int i, int r, int g, int b) -{ - unsigned long offset = reloc_offset(); - - return call_prom("call-method", 6, 1, ADDR("color!"), ih, i, b, g, r); -} - -/* - * If we have a display that we don't know how to drive, - * we will want to try to execute OF's open method for it - * later. However, OF will probably fall over if we do that - * we've taken over the MMU. - * So we check whether we will need to open the display, - * and if so, open it now. - */ -static void __init prom_check_displays(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char type[16], *path; - phandle node; - ihandle ih; - int i; - - static unsigned char default_colors[] = { - 0x00, 0x00, 0x00, - 0x00, 0x00, 0xaa, - 0x00, 0xaa, 0x00, - 0x00, 0xaa, 0xaa, - 0xaa, 0x00, 0x00, - 0xaa, 0x00, 0xaa, - 0xaa, 0xaa, 0x00, - 0xaa, 0xaa, 0xaa, - 0x55, 0x55, 0x55, - 0x55, 0x55, 0xff, - 0x55, 0xff, 0x55, - 0x55, 0xff, 0xff, - 0xff, 0x55, 0x55, - 0xff, 0x55, 0xff, - 0xff, 0xff, 0x55, - 0xff, 0xff, 0xff - }; - const unsigned char *clut; - - prom_printf("Looking for displays\n"); - for (node = 0; prom_next_node(&node); ) { - memset(type, 0, sizeof(type)); - prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("display")) != 0) - continue; - - /* It seems OF doesn't null-terminate the path :-( */ - path = RELOC(prom_scratch); - memset(path, 0, PROM_SCRATCH_SIZE); - - /* - * leave some room at the end of the path for appending extra - * arguments - */ - if (call_prom("package-to-path", 3, 1, node, path, - PROM_SCRATCH_SIZE-10) == PROM_ERROR) - continue; - prom_printf("found display : %s, opening ... ", path); - - ih = call_prom("open", 1, 1, path); - if (ih == 0) { - prom_printf("failed\n"); - continue; - } - - /* Success */ - prom_printf("done\n"); - prom_setprop(node, "linux,opened", NULL, 0); - - /* - * stdout wasn't a display node, pick the first we can find - * for btext - */ - if (_prom->disp_node == 0) - _prom->disp_node = node; - - /* Setup a useable color table when the appropriate - * method is available. Should update this to set-colors */ - clut = RELOC(default_colors); - for (i = 0; i < 32; i++, clut += 3) - if (prom_set_color(ih, i, clut[0], clut[1], - clut[2]) != 0) - break; - -#ifdef CONFIG_LOGO_LINUX_CLUT224 - clut = PTRRELOC(RELOC(logo_linux_clut224.clut)); - for (i = 0; i < RELOC(logo_linux_clut224.clutsize); i++, clut += 3) - if (prom_set_color(ih, i + 32, clut[0], clut[1], - clut[2]) != 0) - break; -#endif /* CONFIG_LOGO_LINUX_CLUT224 */ - } -} - - -/* Return (relocated) pointer to this much memory: moves initrd if reqd. */ -static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end, - unsigned long needed, unsigned long align) -{ - unsigned long offset = reloc_offset(); - void *ret; - - *mem_start = _ALIGN(*mem_start, align); - while ((*mem_start + needed) > *mem_end) { - unsigned long room, chunk; - - prom_debug("Chunk exhausted, claiming more at %x...\n", - RELOC(alloc_bottom)); - room = RELOC(alloc_top) - RELOC(alloc_bottom); - if (room > DEVTREE_CHUNK_SIZE) - room = DEVTREE_CHUNK_SIZE; - if (room < PAGE_SIZE) - prom_panic("No memory for flatten_device_tree (no room)"); - chunk = alloc_up(room, 0); - if (chunk == 0) - prom_panic("No memory for flatten_device_tree (claim failed)"); - *mem_end = RELOC(alloc_top); - } - - ret = (void *)*mem_start; - *mem_start += needed; - - return ret; -} - -#define dt_push_token(token, mem_start, mem_end) \ - do { *((u32 *)make_room(mem_start, mem_end, 4, 4)) = token; } while(0) - -static unsigned long __init dt_find_string(char *str) -{ - unsigned long offset = reloc_offset(); - char *s, *os; - - s = os = (char *)RELOC(dt_string_start); - s += 4; - while (s < (char *)RELOC(dt_string_end)) { - if (strcmp(s, str) == 0) - return s - os; - s += strlen(s) + 1; - } - return 0; -} - -/* - * The Open Firmware 1275 specification states properties must be 31 bytes or - * less, however not all firmwares obey this. Make it 64 bytes to be safe. - */ -#define MAX_PROPERTY_NAME 64 - -static void __init scan_dt_build_strings(phandle node, - unsigned long *mem_start, - unsigned long *mem_end) -{ - unsigned long offset = reloc_offset(); - char *prev_name, *namep, *sstart; - unsigned long soff; - phandle child; - - sstart = (char *)RELOC(dt_string_start); - - /* get and store all property names */ - prev_name = RELOC(""); - for (;;) { - /* 64 is max len of name including nul. */ - namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) != 1) { - /* No more nodes: unwind alloc */ - *mem_start = (unsigned long)namep; - break; - } - - /* skip "name" */ - if (strcmp(namep, RELOC("name")) == 0) { - *mem_start = (unsigned long)namep; - prev_name = RELOC("name"); - continue; - } - /* get/create string entry */ - soff = dt_find_string(namep); - if (soff != 0) { - *mem_start = (unsigned long)namep; - namep = sstart + soff; - } else { - /* Trim off some if we can */ - *mem_start = (unsigned long)namep + strlen(namep) + 1; - RELOC(dt_string_end) = *mem_start; - } - prev_name = namep; - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - scan_dt_build_strings(child, mem_start, mem_end); - child = call_prom("peer", 1, 1, child); - } -} - -static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, - unsigned long *mem_end) -{ - phandle child; - char *namep, *prev_name, *sstart, *p, *ep, *lp, *path; - unsigned long soff; - unsigned char *valp; - unsigned long offset = reloc_offset(); - static char pname[MAX_PROPERTY_NAME]; - int l; - - dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end); - - /* get the node's full name */ - namep = (char *)*mem_start; - l = call_prom("package-to-path", 3, 1, node, - namep, *mem_end - *mem_start); - if (l >= 0) { - /* Didn't fit? Get more room. */ - if ((l+1) > (*mem_end - *mem_start)) { - namep = make_room(mem_start, mem_end, l+1, 1); - call_prom("package-to-path", 3, 1, node, namep, l); - } - namep[l] = '\0'; - - /* Fixup an Apple bug where they have bogus \0 chars in the - * middle of the path in some properties - */ - for (p = namep, ep = namep + l; p < ep; p++) - if (*p == '\0') { - memmove(p, p+1, ep - p); - ep--; l--; p--; - } - - /* now try to extract the unit name in that mess */ - for (p = namep, lp = NULL; *p; p++) - if (*p == '/') - lp = p + 1; - if (lp != NULL) - memmove(namep, lp, strlen(lp) + 1); - *mem_start = _ALIGN(((unsigned long) namep) + - strlen(namep) + 1, 4); - } - - /* get it again for debugging */ - path = RELOC(prom_scratch); - memset(path, 0, PROM_SCRATCH_SIZE); - call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1); - - /* get and store all properties */ - prev_name = RELOC(""); - sstart = (char *)RELOC(dt_string_start); - for (;;) { - if (call_prom("nextprop", 3, 1, node, prev_name, - RELOC(pname)) != 1) - break; - - /* skip "name" */ - if (strcmp(RELOC(pname), RELOC("name")) == 0) { - prev_name = RELOC("name"); - continue; - } - - /* find string offset */ - soff = dt_find_string(RELOC(pname)); - if (soff == 0) { - prom_printf("WARNING: Can't find string index for" - " <%s>, node %s\n", RELOC(pname), path); - break; - } - prev_name = sstart + soff; - - /* get length */ - l = call_prom("getproplen", 2, 1, node, RELOC(pname)); - - /* sanity checks */ - if (l == PROM_ERROR) - continue; - if (l > MAX_PROPERTY_LENGTH) { - prom_printf("WARNING: ignoring large property "); - /* It seems OF doesn't null-terminate the path :-( */ - prom_printf("[%s] ", path); - prom_printf("%s length 0x%x\n", RELOC(pname), l); - continue; - } - - /* push property head */ - dt_push_token(OF_DT_PROP, mem_start, mem_end); - dt_push_token(l, mem_start, mem_end); - dt_push_token(soff, mem_start, mem_end); - - /* push property content */ - valp = make_room(mem_start, mem_end, l, 4); - call_prom("getprop", 4, 1, node, RELOC(pname), valp, l); - *mem_start = _ALIGN(*mem_start, 4); - } - - /* Add a "linux,phandle" property. */ - soff = dt_find_string(RELOC("linux,phandle")); - if (soff == 0) - prom_printf("WARNING: Can't find string index for" - " <linux-phandle> node %s\n", path); - else { - dt_push_token(OF_DT_PROP, mem_start, mem_end); - dt_push_token(4, mem_start, mem_end); - dt_push_token(soff, mem_start, mem_end); - valp = make_room(mem_start, mem_end, 4, 4); - *(u32 *)valp = node; - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - scan_dt_build_struct(child, mem_start, mem_end); - child = call_prom("peer", 1, 1, child); - } - - dt_push_token(OF_DT_END_NODE, mem_start, mem_end); -} - -static void __init flatten_device_tree(void) -{ - phandle root; - unsigned long offset = reloc_offset(); - unsigned long mem_start, mem_end, room; - struct boot_param_header *hdr; - struct prom_t *_prom = PTRRELOC(&prom); - char *namep; - u64 *rsvmap; - - /* - * Check how much room we have between alloc top & bottom (+/- a - * few pages), crop to 4Mb, as this is our "chuck" size - */ - room = RELOC(alloc_top) - RELOC(alloc_bottom) - 0x4000; - if (room > DEVTREE_CHUNK_SIZE) - room = DEVTREE_CHUNK_SIZE; - prom_debug("starting device tree allocs at %x\n", RELOC(alloc_bottom)); - - /* Now try to claim that */ - mem_start = (unsigned long)alloc_up(room, PAGE_SIZE); - if (mem_start == 0) - prom_panic("Can't allocate initial device-tree chunk\n"); - mem_end = RELOC(alloc_top); - - /* Get root of tree */ - root = call_prom("peer", 1, 1, (phandle)0); - if (root == (phandle)0) - prom_panic ("couldn't get device tree root\n"); - - /* Build header and make room for mem rsv map */ - mem_start = _ALIGN(mem_start, 4); - hdr = make_room(&mem_start, &mem_end, - sizeof(struct boot_param_header), 4); - RELOC(dt_header_start) = (unsigned long)hdr; - rsvmap = make_room(&mem_start, &mem_end, sizeof(mem_reserve_map), 8); - - /* Start of strings */ - mem_start = PAGE_ALIGN(mem_start); - RELOC(dt_string_start) = mem_start; - mem_start += 4; /* hole */ - - /* Add "linux,phandle" in there, we'll need it */ - namep = make_room(&mem_start, &mem_end, 16, 1); - strcpy(namep, RELOC("linux,phandle")); - mem_start = (unsigned long)namep + strlen(namep) + 1; - - /* Build string array */ - prom_printf("Building dt strings...\n"); - scan_dt_build_strings(root, &mem_start, &mem_end); - RELOC(dt_string_end) = mem_start; - - /* Build structure */ - mem_start = PAGE_ALIGN(mem_start); - RELOC(dt_struct_start) = mem_start; - prom_printf("Building dt structure...\n"); - scan_dt_build_struct(root, &mem_start, &mem_end); - dt_push_token(OF_DT_END, &mem_start, &mem_end); - RELOC(dt_struct_end) = PAGE_ALIGN(mem_start); - - /* Finish header */ - hdr->boot_cpuid_phys = _prom->cpu; - hdr->magic = OF_DT_HEADER; - hdr->totalsize = RELOC(dt_struct_end) - RELOC(dt_header_start); - hdr->off_dt_struct = RELOC(dt_struct_start) - RELOC(dt_header_start); - hdr->off_dt_strings = RELOC(dt_string_start) - RELOC(dt_header_start); - hdr->dt_strings_size = RELOC(dt_string_end) - RELOC(dt_string_start); - hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - RELOC(dt_header_start); - hdr->version = OF_DT_VERSION; - /* Version 16 is not backward compatible */ - hdr->last_comp_version = 0x10; - - /* Reserve the whole thing and copy the reserve map in, we - * also bump mem_reserve_cnt to cause further reservations to - * fail since it's too late. - */ - reserve_mem(RELOC(dt_header_start), hdr->totalsize); - memcpy(rsvmap, RELOC(mem_reserve_map), sizeof(mem_reserve_map)); - -#ifdef DEBUG_PROM - { - int i; - prom_printf("reserved memory map:\n"); - for (i = 0; i < RELOC(mem_reserve_cnt); i++) - prom_printf(" %x - %x\n", RELOC(mem_reserve_map)[i].base, - RELOC(mem_reserve_map)[i].size); - } -#endif - RELOC(mem_reserve_cnt) = MEM_RESERVE_MAP_SIZE; - - prom_printf("Device tree strings 0x%x -> 0x%x\n", - RELOC(dt_string_start), RELOC(dt_string_end)); - prom_printf("Device tree struct 0x%x -> 0x%x\n", - RELOC(dt_struct_start), RELOC(dt_struct_end)); - -} - - -static void __init fixup_device_tree(void) -{ - unsigned long offset = reloc_offset(); - phandle u3, i2c, mpic; - u32 u3_rev; - u32 interrupts[2]; - u32 parent; - - /* Some G5s have a missing interrupt definition, fix it up here */ - u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); - if (!PHANDLE_VALID(u3)) - return; - i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); - if (!PHANDLE_VALID(i2c)) - return; - mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); - if (!PHANDLE_VALID(mpic)) - return; - - /* check if proper rev of u3 */ - if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) - == PROM_ERROR) - return; - if (u3_rev < 0x35 || u3_rev > 0x39) - return; - /* does it need fixup ? */ - if (prom_getproplen(i2c, "interrupts") > 0) - return; - - prom_printf("fixing up bogus interrupts for u3 i2c...\n"); - - /* interrupt on this revision of u3 is number 0 and level */ - interrupts[0] = 0; - interrupts[1] = 1; - prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); - parent = (u32)mpic; - prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); -} - - -static void __init prom_find_boot_cpu(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - u32 getprop_rval; - ihandle prom_cpu; - phandle cpu_pkg; - - if (prom_getprop(_prom->chosen, "cpu", &prom_cpu, sizeof(prom_cpu)) <= 0) - prom_panic("cannot find boot cpu"); - - cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu); - - prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval)); - _prom->cpu = getprop_rval; - - prom_debug("Booting CPU hw index = 0x%x\n", _prom->cpu); -} - -static void __init prom_check_initrd(unsigned long r3, unsigned long r4) -{ -#ifdef CONFIG_BLK_DEV_INITRD - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - if ( r3 && r4 && r4 != 0xdeadbeef) { - u64 val; - - RELOC(prom_initrd_start) = (r3 >= KERNELBASE) ? __pa(r3) : r3; - RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4; - - val = (u64)RELOC(prom_initrd_start); - prom_setprop(_prom->chosen, "linux,initrd-start", &val, sizeof(val)); - val = (u64)RELOC(prom_initrd_end); - prom_setprop(_prom->chosen, "linux,initrd-end", &val, sizeof(val)); - - reserve_mem(RELOC(prom_initrd_start), - RELOC(prom_initrd_end) - RELOC(prom_initrd_start)); - - prom_debug("initrd_start=0x%x\n", RELOC(prom_initrd_start)); - prom_debug("initrd_end=0x%x\n", RELOC(prom_initrd_end)); - } -#endif /* CONFIG_BLK_DEV_INITRD */ -} - -/* - * We enter here early on, when the Open Firmware prom is still - * handling exceptions and the MMU hash table for us. - */ - -unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long pp, - unsigned long r6, unsigned long r7) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - unsigned long phys = KERNELBASE - offset; - u32 getprop_rval; - - /* - * First zero the BSS - */ - memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start); - - /* - * Init interface to Open Firmware, get some node references, - * like /chosen - */ - prom_init_client_services(pp); - - /* - * Init prom stdout device - */ - prom_init_stdout(); - prom_debug("klimit=0x%x\n", RELOC(klimit)); - prom_debug("offset=0x%x\n", offset); - - /* - * Check for an initrd - */ - prom_check_initrd(r3, r4); - - /* - * Get default machine type. At this point, we do not differenciate - * between pSeries SMP and pSeries LPAR - */ - RELOC(of_platform) = prom_find_machine_type(); - getprop_rval = RELOC(of_platform); - prom_setprop(_prom->chosen, "linux,platform", - &getprop_rval, sizeof(getprop_rval)); - - /* - * On pSeries, inform the firmware about our capabilities - */ - if (RELOC(of_platform) == PLATFORM_PSERIES || - RELOC(of_platform) == PLATFORM_PSERIES_LPAR) - prom_send_capabilities(); - - /* - * On pSeries and Cell, copy the CPU hold code - */ - if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_CELL)) - copy_and_flush(0, KERNELBASE - offset, 0x100, 0); - - /* - * Get memory cells format - */ - getprop_rval = 1; - prom_getprop(_prom->root, "#size-cells", - &getprop_rval, sizeof(getprop_rval)); - _prom->root_size_cells = getprop_rval; - getprop_rval = 2; - prom_getprop(_prom->root, "#address-cells", - &getprop_rval, sizeof(getprop_rval)); - _prom->root_addr_cells = getprop_rval; - - /* - * Do early parsing of command line - */ - early_cmdline_parse(); - - /* - * Initialize memory management within prom_init - */ - prom_init_mem(); - - /* - * Determine which cpu is actually running right _now_ - */ - prom_find_boot_cpu(); - - /* - * Initialize display devices - */ - prom_check_displays(); - - /* - * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else - * that uses the allocator, we need to make sure we get the top of memory - * available for us here... - */ - if (RELOC(of_platform) == PLATFORM_PSERIES) - prom_initialize_tce_table(); - - /* - * On non-powermacs, try to instantiate RTAS and puts all CPUs - * in spin-loops. PowerMacs don't have a working RTAS and use - * a different way to spin CPUs - */ - if (RELOC(of_platform) != PLATFORM_POWERMAC) { - prom_instantiate_rtas(); - prom_hold_cpus(); - } - - /* - * Fill in some infos for use by the kernel later on - */ - if (RELOC(ppc64_iommu_off)) - prom_setprop(_prom->chosen, "linux,iommu-off", NULL, 0); - - if (RELOC(iommu_force_on)) - prom_setprop(_prom->chosen, "linux,iommu-force-on", NULL, 0); - - if (RELOC(prom_memory_limit)) - prom_setprop(_prom->chosen, "linux,memory-limit", - PTRRELOC(&prom_memory_limit), sizeof(RELOC(prom_memory_limit))); - - if (RELOC(prom_tce_alloc_start)) { - prom_setprop(_prom->chosen, "linux,tce-alloc-start", - PTRRELOC(&prom_tce_alloc_start), sizeof(RELOC(prom_tce_alloc_start))); - prom_setprop(_prom->chosen, "linux,tce-alloc-end", - PTRRELOC(&prom_tce_alloc_end), sizeof(RELOC(prom_tce_alloc_end))); - } - - /* - * Fixup any known bugs in the device-tree - */ - fixup_device_tree(); - - /* - * Now finally create the flattened device-tree - */ - prom_printf("copying OF device tree ...\n"); - flatten_device_tree(); - - /* in case stdin is USB and still active on IBM machines... */ - prom_close_stdin(); - - /* - * Call OF "quiesce" method to shut down pending DMA's from - * devices etc... - */ - prom_printf("Calling quiesce ...\n"); - call_prom("quiesce", 0, 0); - - /* - * And finally, call the kernel passing it the flattened device - * tree and NULL as r5, thus triggering the new entry point which - * is common to us and kexec - */ - prom_printf("returning from prom_init\n"); - prom_debug("->dt_header_start=0x%x\n", RELOC(dt_header_start)); - prom_debug("->phys=0x%x\n", phys); - - __start(RELOC(dt_header_start), phys, 0); - - return 0; -} - |