diff options
Diffstat (limited to 'arch/sh/boards/mach-se')
| -rw-r--r-- | arch/sh/boards/mach-se/7206/Makefile | 2 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7206/io.c | 104 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7206/irq.c | 24 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7206/setup.c | 15 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7343/irq.c | 15 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/770x/Makefile | 2 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/770x/io.c | 156 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/770x/setup.c | 22 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7722/irq.c | 15 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7724/irq.c | 13 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7724/setup.c | 102 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7751/Makefile | 2 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7751/io.c | 119 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7751/setup.c | 18 |
14 files changed, 79 insertions, 530 deletions
diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile index 63e7ed6..5c9eaa0 100644 --- a/arch/sh/boards/mach-se/7206/Makefile +++ b/arch/sh/boards/mach-se/7206/Makefile @@ -2,4 +2,4 @@ # Makefile for the 7206 SolutionEngine specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c deleted file mode 100644 index adadc77..0000000 --- a/arch/sh/boards/mach-se/7206/io.c +++ /dev/null @@ -1,104 +0,0 @@ -/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $ - * - * linux/arch/sh/boards/se/7206/io.c - * - * Copyright (C) 2006 Yoshinori Sato - * - * I/O routine for Hitachi 7206 SolutionEngine. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/io.h> -#include <mach-se/mach/se7206.h> - - -static inline void delay(void) -{ - __raw_readw(0x20000000); /* P2 ROM Area */ -} - -/* MS7750 requires special versions of in*, out* routines, since - PC-like io ports are located at upper half byte of 16-bit word which - can be accessed only with 16-bit wide. */ - -static inline volatile __u16 * -port2adr(unsigned int port) -{ - if (port >= 0x2000 && port < 0x2020) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - else if (port >= 0x300 && port < 0x310) - return (volatile __u16 *) (PA_SMSC + (port - 0x300)); - - return (volatile __u16 *)port; -} - -unsigned char se7206_inb(unsigned long port) -{ - return (*port2adr(port)) & 0xff; -} - -unsigned char se7206_inb_p(unsigned long port) -{ - unsigned long v; - - v = (*port2adr(port)) & 0xff; - delay(); - return v; -} - -unsigned short se7206_inw(unsigned long port) -{ - return *port2adr(port); -} - -void se7206_outb(unsigned char value, unsigned long port) -{ - *(port2adr(port)) = value; -} - -void se7206_outb_p(unsigned char value, unsigned long port) -{ - *(port2adr(port)) = value; - delay(); -} - -void se7206_outw(unsigned short value, unsigned long port) -{ - *port2adr(port) = value; -} - -void se7206_insb(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u8 *ap = addr; - - while (count--) - *ap++ = *p; -} - -void se7206_insw(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u16 *ap = addr; - while (count--) - *ap++ = *p; -} - -void se7206_outsb(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u8 *ap = addr; - - while (count--) - *p = *ap++; -} - -void se7206_outsw(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u16 *ap = addr; - while (count--) - *p = *ap++; -} diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index 8d82175..9070d7e 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -25,8 +25,9 @@ #define INTC_IPR01 0xfffe0818 #define INTC_ICR1 0xfffe0802 -static void disable_se7206_irq(unsigned int irq) +static void disable_se7206_irq(struct irq_data *data) { + unsigned int irq = data->irq; unsigned short val; unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq))); unsigned short msk0,msk1; @@ -55,8 +56,9 @@ static void disable_se7206_irq(unsigned int irq) __raw_writew(msk1, INTMSK1); } -static void enable_se7206_irq(unsigned int irq) +static void enable_se7206_irq(struct irq_data *data) { + unsigned int irq = data->irq; unsigned short val; unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq))); unsigned short msk0,msk1; @@ -86,13 +88,14 @@ static void enable_se7206_irq(unsigned int irq) __raw_writew(msk1, INTMSK1); } -static void eoi_se7206_irq(unsigned int irq) +static void eoi_se7206_irq(struct irq_data *data) { unsigned short sts0,sts1; + unsigned int irq = data->irq; struct irq_desc *desc = irq_to_desc(irq); if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_se7206_irq(irq); + enable_se7206_irq(data); /* FPGA isr clear */ sts0 = __raw_readw(INTSTS0); sts1 = __raw_readw(INTSTS1); @@ -115,10 +118,9 @@ static void eoi_se7206_irq(unsigned int irq) static struct irq_chip se7206_irq_chip __read_mostly = { .name = "SE7206-FPGA", - .mask = disable_se7206_irq, - .unmask = enable_se7206_irq, - .mask_ack = disable_se7206_irq, - .eoi = eoi_se7206_irq, + .irq_mask = disable_se7206_irq, + .irq_unmask = enable_se7206_irq, + .irq_eoi = eoi_se7206_irq, }; static void make_se7206_irq(unsigned int irq) @@ -126,7 +128,7 @@ static void make_se7206_irq(unsigned int irq) disable_irq_nosync(irq); set_irq_chip_and_handler_name(irq, &se7206_irq_chip, handle_level_irq, "level"); - disable_se7206_irq(irq); + disable_se7206_irq(irq_get_irq_data(irq)); } /* @@ -137,11 +139,13 @@ void __init init_se7206_IRQ(void) make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ make_se7206_irq(IRQ1_IRQ); /* ATA */ make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ - __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ + + __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */ /* FPGA System register setup*/ __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */ __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */ + /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ __raw_writew(0x0001,INTSEL); } diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c index 8f5c65d..7f4871c 100644 --- a/arch/sh/boards/mach-se/7206/setup.c +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -86,20 +86,5 @@ __initcall(se7206_devices_setup); static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_nr_irqs = 256, - .mv_inb = se7206_inb, - .mv_inw = se7206_inw, - .mv_outb = se7206_outb, - .mv_outw = se7206_outw, - - .mv_inb_p = se7206_inb_p, - .mv_inw_p = se7206_inw, - .mv_outb_p = se7206_outb_p, - .mv_outw_p = se7206_outw, - - .mv_insb = se7206_insb, - .mv_insw = se7206_insw, - .mv_outsb = se7206_outsb, - .mv_outsw = se7206_outsw, - .mv_init_irq = init_se7206_IRQ, }; diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index d4305c2..76255a1 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -18,23 +18,22 @@ unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, }; -static void disable_se7343_irq(unsigned int irq) +static void disable_se7343_irq(struct irq_data *data) { - unsigned int bit = (unsigned int)get_irq_chip_data(irq); + unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); } -static void enable_se7343_irq(unsigned int irq) +static void enable_se7343_irq(struct irq_data *data) { - unsigned int bit = (unsigned int)get_irq_chip_data(irq); + unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); } static struct irq_chip se7343_irq_chip __read_mostly = { - .name = "SE7343-FPGA", - .mask = disable_se7343_irq, - .unmask = enable_se7343_irq, - .mask_ack = disable_se7343_irq, + .name = "SE7343-FPGA", + .irq_mask = disable_se7343_irq, + .irq_unmask = enable_se7343_irq, }; static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile index 8e624b0..43ea14f 100644 --- a/arch/sh/boards/mach-se/770x/Makefile +++ b/arch/sh/boards/mach-se/770x/Makefile @@ -2,4 +2,4 @@ # Makefile for the 770x SolutionEngine specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c deleted file mode 100644 index 28833c8..0000000 --- a/arch/sh/boards/mach-se/770x/io.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Copyright (C) 2000 Kazumoto Kojima - * - * I/O routine for Hitachi SolutionEngine. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/io.h> -#include <mach-se/mach/se.h> - -/* MS7750 requires special versions of in*, out* routines, since - PC-like io ports are located at upper half byte of 16-bit word which - can be accessed only with 16-bit wide. */ - -static inline volatile __u16 * -port2adr(unsigned int port) -{ - if (port & 0xff000000) - return ( volatile __u16 *) port; - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - else if (port >= 0x1000) - return (volatile __u16 *) (PA_83902 + (port << 1)); - else - return (volatile __u16 *) (PA_SUPERIO + (port << 1)); -} - -static inline int -shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - -unsigned char se_inb(unsigned long port) -{ - if (shifted_port(port)) - return (*port2adr(port) >> 8); - else - return (*port2adr(port))&0xff; -} - -unsigned char se_inb_p(unsigned long port) -{ - unsigned long v; - - if (shifted_port(port)) - v = (*port2adr(port) >> 8); - else - v = (*port2adr(port))&0xff; - ctrl_delay(); - return v; -} - -unsigned short se_inw(unsigned long port) -{ - if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -unsigned int se_inl(unsigned long port) -{ - maybebadio(port); - return 0; -} - -void se_outb(unsigned char value, unsigned long port) -{ - if (shifted_port(port)) - *(port2adr(port)) = value << 8; - else - *(port2adr(port)) = value; -} - -void se_outb_p(unsigned char value, unsigned long port) -{ - if (shifted_port(port)) - *(port2adr(port)) = value << 8; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void se_outw(unsigned short value, unsigned long port) -{ - if (port >= 0x2000) - *port2adr(port) = value; - else - maybebadio(port); -} - -void se_outl(unsigned int value, unsigned long port) -{ - maybebadio(port); -} - -void se_insb(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u8 *ap = addr; - - if (shifted_port(port)) { - while (count--) - *ap++ = *p >> 8; - } else { - while (count--) - *ap++ = *p; - } -} - -void se_insw(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u16 *ap = addr; - while (count--) - *ap++ = *p; -} - -void se_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void se_outsb(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u8 *ap = addr; - - if (shifted_port(port)) { - while (count--) - *p = *ap++ << 8; - } else { - while (count--) - *p = *ap++; - } -} - -void se_outsw(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u16 *ap = addr; - - while (count--) - *p = *ap++; -} - -void se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c index 66d39d1..31330c6 100644 --- a/arch/sh/boards/mach-se/770x/setup.c +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -195,27 +195,5 @@ static struct sh_machine_vector mv_se __initmv = { #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) .mv_nr_irqs = 104, #endif - - .mv_inb = se_inb, - .mv_inw = se_inw, - .mv_inl = se_inl, - .mv_outb = se_outb, - .mv_outw = se_outw, - .mv_outl = se_outl, - - .mv_inb_p = se_inb_p, - .mv_inw_p = se_inw, - .mv_inl_p = se_inl, - .mv_outb_p = se_outb_p, - .mv_outw_p = se_outw, - .mv_outl_p = se_outl, - - .mv_insb = se_insb, - .mv_insw = se_insw, - .mv_insl = se_insl, - .mv_outsb = se_outsb, - .mv_outsw = se_outsw, - .mv_outsl = se_outsl, - .mv_init_irq = init_se_IRQ, }; diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index 61605db..c013f95 100644 --- a/arch/sh/boards/mach-se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -18,23 +18,22 @@ unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, }; -static void disable_se7722_irq(unsigned int irq) +static void disable_se7722_irq(struct irq_data *data) { - unsigned int bit = (unsigned int)get_irq_chip_data(irq); + unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK); } -static void enable_se7722_irq(unsigned int irq) +static void enable_se7722_irq(struct irq_data *data) { - unsigned int bit = (unsigned int)get_irq_chip_data(irq); + unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK); } static struct irq_chip se7722_irq_chip __read_mostly = { - .name = "SE7722-FPGA", - .mask = disable_se7722_irq, - .unmask = enable_se7722_irq, - .mask_ack = disable_se7722_irq, + .name = "SE7722-FPGA", + .irq_mask = disable_se7722_irq, + .irq_unmask = enable_se7722_irq, }; static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c index 0942be2..5bd87c2 100644 --- a/arch/sh/boards/mach-se/7724/irq.c +++ b/arch/sh/boards/mach-se/7724/irq.c @@ -68,25 +68,26 @@ static struct fpga_irq get_fpga_irq(unsigned int irq) return set; } -static void disable_se7724_irq(unsigned int irq) +static void disable_se7724_irq(struct irq_data *data) { + unsigned int irq = data->irq; struct fpga_irq set = get_fpga_irq(fpga2irq(irq)); unsigned int bit = irq - set.base; __raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr); } -static void enable_se7724_irq(unsigned int irq) +static void enable_se7724_irq(struct irq_data *data) { + unsigned int irq = data->irq; struct fpga_irq set = get_fpga_irq(fpga2irq(irq)); unsigned int bit = irq - set.base; __raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr); } static struct irq_chip se7724_irq_chip __read_mostly = { - .name = "SE7724-FPGA", - .mask = disable_se7724_irq, - .unmask = enable_se7724_irq, - .mask_ack = disable_se7724_irq, + .name = "SE7724-FPGA", + .irq_mask = disable_se7724_irq, + .irq_unmask = enable_se7724_irq, }; static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 552ebd9..527a0cd 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -144,16 +144,42 @@ static struct platform_device nor_flash_device = { }; /* LCDC */ +const static struct fb_videomode lcdc_720p_modes[] = { + { + .name = "LB070WV1", + .sync = 0, /* hsync and vsync are active low */ + .xres = 1280, + .yres = 720, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 40, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + }, +}; + +const static struct fb_videomode lcdc_vga_modes[] = { + { + .name = "LB070WV1", + .sync = 0, /* hsync and vsync are active low */ + .xres = 640, + .yres = 480, + .left_margin = 105, + .right_margin = 50, + .hsync_len = 96, + .upper_margin = 33, + .lower_margin = 10, + .vsync_len = 2, + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .bpp = 16, .clock_divider = 1, - .lcd_cfg = { - .name = "LB070WV1", - .sync = 0, /* hsync and vsync are active low */ - }, .lcd_size_cfg = { /* 7.0 inch */ .width = 152, .height = 91, @@ -257,31 +283,6 @@ static struct platform_device ceu1_device = { }; /* FSI */ -/* - * FSI-A use external clock which came from ak464x. - * So, we should change parent of fsi - */ -#define FCLKACR 0xa4150008 -static void fsimck_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsimck_clk_ops = { - .init = fsimck_init, -}; - -static struct clk fsimcka_clk = { - .ops = &fsimck_clk_ops, - .enable_reg = (void __iomem *)FCLKACR, - .rate = 0, /* unknown */ -}; - /* change J20, J21, J22 pin to 1-2 connection to use slave mode */ static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | @@ -550,7 +551,6 @@ static struct sh_vou_pdata sh_vou_pdata = { .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW, .board_info = &ak8813, .i2c_adap = 0, - .module_name = "ak881x", }; static struct resource sh_vou_resources[] = { @@ -827,37 +827,29 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT0, NULL); /* enable FSI */ - gpio_request(GPIO_FN_FSIMCKB, NULL); gpio_request(GPIO_FN_FSIMCKA, NULL); + gpio_request(GPIO_FN_FSIIASD, NULL); gpio_request(GPIO_FN_FSIOASD, NULL); gpio_request(GPIO_FN_FSIIABCK, NULL); gpio_request(GPIO_FN_FSIIALRCK, NULL); gpio_request(GPIO_FN_FSIOABCK, NULL); gpio_request(GPIO_FN_FSIOALRCK, NULL); gpio_request(GPIO_FN_CLKAUDIOAO, NULL); - gpio_request(GPIO_FN_FSIIBSD, NULL); - gpio_request(GPIO_FN_FSIOBSD, NULL); - gpio_request(GPIO_FN_FSIIBBCK, NULL); - gpio_request(GPIO_FN_FSIIBLRCK, NULL); - gpio_request(GPIO_FN_FSIOBBCK, NULL); - gpio_request(GPIO_FN_FSIOBLRCK, NULL); - gpio_request(GPIO_FN_CLKAUDIOBO, NULL); - gpio_request(GPIO_FN_FSIIASD, NULL); /* set SPU2 clock to 83.4 MHz */ clk = clk_get(NULL, "spu_clk"); - if (clk) { + if (!IS_ERR(clk)) { clk_set_rate(clk, clk_round_rate(clk, 83333333)); clk_put(clk); } /* change parent of FSI A */ clk = clk_get(NULL, "fsia_clk"); - if (clk) { - clk_register(&fsimcka_clk); - clk_set_parent(clk, &fsimcka_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimcka_clk, 11000); + if (!IS_ERR(clk)) { + /* 48kHz dummy clock was used to make sure 1/1 divide */ + clk_set_rate(&sh7724_fsimcka_clk, 48000); + clk_set_parent(clk, &sh7724_fsimcka_clk); + clk_set_rate(clk, 48000); clk_put(clk); } @@ -909,24 +901,12 @@ static int __init devices_setup(void) if (sw & SW41_B) { /* 720p */ - lcdc_info.ch[0].lcd_cfg.xres = 1280; - lcdc_info.ch[0].lcd_cfg.yres = 720; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 40; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; + lcdc_info.ch[0].lcd_cfg = lcdc_720p_modes; + lcdc_info.ch[0].num_cfg = ARRAY_SIZE(lcdc_720p_modes); } else { /* VGA */ - lcdc_info.ch[0].lcd_cfg.xres = 640; - lcdc_info.ch[0].lcd_cfg.yres = 480; - lcdc_info.ch[0].lcd_cfg.left_margin = 105; - lcdc_info.ch[0].lcd_cfg.right_margin = 50; - lcdc_info.ch[0].lcd_cfg.hsync_len = 96; - lcdc_info.ch[0].lcd_cfg.upper_margin = 33; - lcdc_info.ch[0].lcd_cfg.lower_margin = 10; - lcdc_info.ch[0].lcd_cfg.vsync_len = 2; + lcdc_info.ch[0].lcd_cfg = lcdc_vga_modes; + lcdc_info.ch[0].num_cfg = ARRAY_SIZE(lcdc_vga_modes); } if (sw & SW41_A) { diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile index e6f4341..a338fd9 100644 --- a/arch/sh/boards/mach-se/7751/Makefile +++ b/arch/sh/boards/mach-se/7751/Makefile @@ -2,4 +2,4 @@ # Makefile for the 7751 SolutionEngine specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c deleted file mode 100644 index 6e75bd4..0000000 --- a/arch/sh/boards/mach-se/7751/io.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Hitachi 7751 SolutionEngine. - * - * Initial version only to support LAN access; some - * placeholder code from io_se.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <asm/io.h> -#include <mach-se/mach/se7751.h> -#include <asm/addrspace.h> - -static inline volatile u16 *port2adr(unsigned int port) -{ - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - maybebadio((unsigned long)port); - return (volatile __u16*)port; -} - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char sh7751se_inb(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned char *)port; - else - return (*port2adr(port)) & 0xff; -} - -unsigned char sh7751se_inb_p(unsigned long port) -{ - unsigned char v; - - if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else - v = (*port2adr(port)) & 0xff; - ctrl_delay(); - return v; -} - -unsigned short sh7751se_inw(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -unsigned int sh7751se_inl(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -void sh7751se_outb(unsigned char value, unsigned long port) -{ - - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else - *(port2adr(port)) = value; -} - -void sh7751se_outb_p(unsigned char value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void sh7751se_outw(unsigned short value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (port >= 0x2000) - *port2adr(port) = value; - else - maybebadio(port); -} - -void sh7751se_outl(unsigned int value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else - maybebadio(port); -} - -void sh7751se_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c index 5057251..9fbc51b 100644 --- a/arch/sh/boards/mach-se/7751/setup.c +++ b/arch/sh/boards/mach-se/7751/setup.c @@ -56,23 +56,5 @@ __initcall(se7751_devices_setup); static struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", .mv_nr_irqs = 72, - - .mv_inb = sh7751se_inb, - .mv_inw = sh7751se_inw, - .mv_inl = sh7751se_inl, - .mv_outb = sh7751se_outb, - .mv_outw = sh7751se_outw, - .mv_outl = sh7751se_outl, - - .mv_inb_p = sh7751se_inb_p, - .mv_inw_p = sh7751se_inw, - .mv_inl_p = sh7751se_inl, - .mv_outb_p = sh7751se_outb_p, - .mv_outw_p = sh7751se_outw, - .mv_outl_p = sh7751se_outl, - - .mv_insl = sh7751se_insl, - .mv_outsl = sh7751se_outsl, - .mv_init_irq = init_7751se_IRQ, }; |