diff options
Diffstat (limited to 'arch/tile/kernel/intvec_32.S')
| -rw-r--r-- | arch/tile/kernel/intvec_32.S | 67 |
1 files changed, 36 insertions, 31 deletions
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S index f87c5c0..206dc7e 100644 --- a/arch/tile/kernel/intvec_32.S +++ b/arch/tile/kernel/intvec_32.S @@ -32,8 +32,8 @@ # error "No support for kernel preemption currently" #endif -#if INT_INTCTRL_1 < 32 || INT_INTCTRL_1 >= 48 -# error INT_INTCTRL_1 coded to set high interrupt mask +#if INT_INTCTRL_K < 32 || INT_INTCTRL_K >= 48 +# error INT_INTCTRL_K coded to set high interrupt mask #endif #define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg) @@ -132,8 +132,8 @@ intvec_\vecname: /* Temporarily save a register so we have somewhere to work. */ - mtspr SYSTEM_SAVE_1_1, r0 - mfspr r0, EX_CONTEXT_1_1 + mtspr SPR_SYSTEM_SAVE_K_1, r0 + mfspr r0, SPR_EX_CONTEXT_K_1 /* The cmpxchg code clears sp to force us to reset it here on fault. */ { @@ -167,18 +167,18 @@ intvec_\vecname: * The page_fault handler may be downcalled directly by the * hypervisor even when Linux is running and has ICS set. * - * In this case the contents of EX_CONTEXT_1_1 reflect the + * In this case the contents of EX_CONTEXT_K_1 reflect the * previous fault and can't be relied on to choose whether or * not to reinitialize the stack pointer. So we add a test - * to see whether SYSTEM_SAVE_1_2 has the high bit set, + * to see whether SYSTEM_SAVE_K_2 has the high bit set, * and if so we don't reinitialize sp, since we must be coming * from Linux. (In fact the precise case is !(val & ~1), * but any Linux PC has to have the high bit set.) * - * Note that the hypervisor *always* sets SYSTEM_SAVE_1_2 for + * Note that the hypervisor *always* sets SYSTEM_SAVE_K_2 for * any path that turns into a downcall to one of our TLB handlers. */ - mfspr r0, SYSTEM_SAVE_1_2 + mfspr r0, SPR_SYSTEM_SAVE_K_2 { blz r0, 0f /* high bit in S_S_1_2 is for a PC to use */ move r0, sp @@ -187,12 +187,12 @@ intvec_\vecname: 2: /* - * SYSTEM_SAVE_1_0 holds the cpu number in the low bits, and + * SYSTEM_SAVE_K_0 holds the cpu number in the low bits, and * the current stack top in the higher bits. So we recover * our stack top by just masking off the low bits, then * point sp at the top aligned address on the actual stack page. */ - mfspr r0, SYSTEM_SAVE_1_0 + mfspr r0, SPR_SYSTEM_SAVE_K_0 mm r0, r0, zero, LOG2_THREAD_SIZE, 31 0: @@ -254,7 +254,7 @@ intvec_\vecname: sw sp, r3 addli sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3) } - mfspr r0, EX_CONTEXT_1_0 + mfspr r0, SPR_EX_CONTEXT_K_0 .ifc \processing,handle_syscall /* * Bump the saved PC by one bundle so that when we return, we won't @@ -267,7 +267,7 @@ intvec_\vecname: sw sp, r0 addli sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC } - mfspr r0, EX_CONTEXT_1_1 + mfspr r0, SPR_EX_CONTEXT_K_1 { sw sp, r0 addi sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1 @@ -289,7 +289,7 @@ intvec_\vecname: .endif addli sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM } - mfspr r0, SYSTEM_SAVE_1_1 /* Original r0 */ + mfspr r0, SPR_SYSTEM_SAVE_K_1 /* Original r0 */ { sw sp, r0 addi sp, sp, -PTREGS_OFFSET_REG(0) - 4 @@ -309,12 +309,12 @@ intvec_\vecname: * See discussion below at "finish_interrupt_save". */ .ifc \c_routine, do_page_fault - mfspr r2, SYSTEM_SAVE_1_3 /* address of page fault */ - mfspr r3, SYSTEM_SAVE_1_2 /* info about page fault */ + mfspr r2, SPR_SYSTEM_SAVE_K_3 /* address of page fault */ + mfspr r3, SPR_SYSTEM_SAVE_K_2 /* info about page fault */ .else .ifc \vecnum, INT_DOUBLE_FAULT { - mfspr r2, SYSTEM_SAVE_1_2 /* double fault info from HV */ + mfspr r2, SPR_SYSTEM_SAVE_K_2 /* double fault info from HV */ movei r3, 0 } .else @@ -467,7 +467,7 @@ intvec_\vecname: /* Load tp with our per-cpu offset. */ #ifdef CONFIG_SMP { - mfspr r20, SYSTEM_SAVE_1_0 + mfspr r20, SPR_SYSTEM_SAVE_K_0 moveli r21, lo16(__per_cpu_offset) } { @@ -487,7 +487,7 @@ intvec_\vecname: * We load flags in r32 here so we can jump to .Lrestore_regs * directly after do_page_fault_ics() if necessary. */ - mfspr r32, EX_CONTEXT_1_1 + mfspr r32, SPR_EX_CONTEXT_K_1 { andi r32, r32, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS) @@ -957,11 +957,11 @@ STD_ENTRY(interrupt_return) pop_reg_zero r21, r3, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC pop_reg_zero lr, r4, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_EX1 { - mtspr EX_CONTEXT_1_0, r21 + mtspr SPR_EX_CONTEXT_K_0, r21 move r5, zero } { - mtspr EX_CONTEXT_1_1, lr + mtspr SPR_EX_CONTEXT_K_1, lr andi lr, lr, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ } @@ -1199,7 +1199,7 @@ STD_ENTRY(interrupt_return) STD_ENDPROC(interrupt_return) /* - * This interrupt variant clears the INT_INTCTRL_1 interrupt mask bit + * This interrupt variant clears the INT_INTCTRL_K interrupt mask bit * before returning, so we can properly get more downcalls. */ .pushsection .text.handle_interrupt_downcall,"ax" @@ -1208,11 +1208,11 @@ handle_interrupt_downcall: check_single_stepping normal, .Ldispatch_downcall .Ldispatch_downcall: - /* Clear INTCTRL_1 from the set of interrupts we ever enable. */ + /* Clear INTCTRL_K from the set of interrupts we ever enable. */ GET_INTERRUPTS_ENABLED_MASK_PTR(r30) { addi r30, r30, 4 - movei r31, INT_MASK(INT_INTCTRL_1) + movei r31, INT_MASK(INT_INTCTRL_K) } { lw r20, r30 @@ -1227,7 +1227,7 @@ handle_interrupt_downcall: } FEEDBACK_REENTER(handle_interrupt_downcall) - /* Allow INTCTRL_1 to be enabled next time we enable interrupts. */ + /* Allow INTCTRL_K to be enabled next time we enable interrupts. */ lw r20, r30 or r20, r20, r31 sw r30, r20 @@ -1509,7 +1509,7 @@ handle_ill: /* Various stub interrupt handlers and syscall handlers */ STD_ENTRY_LOCAL(_kernel_double_fault) - mfspr r1, EX_CONTEXT_1_0 + mfspr r1, SPR_EX_CONTEXT_K_0 move r2, lr move r3, sp move r4, r52 @@ -1518,7 +1518,7 @@ STD_ENTRY_LOCAL(_kernel_double_fault) STD_ENDPROC(_kernel_double_fault) STD_ENTRY_LOCAL(bad_intr) - mfspr r2, EX_CONTEXT_1_0 + mfspr r2, SPR_EX_CONTEXT_K_0 panic "Unhandled interrupt %#x: PC %#lx" STD_ENDPROC(bad_intr) @@ -1560,7 +1560,7 @@ STD_ENTRY(_sys_clone) * a page fault which would assume the stack was valid, it does * save/restore the stack pointer and zero it out to make sure it gets reset. * Since we always keep interrupts disabled, the hypervisor won't - * clobber our EX_CONTEXT_1_x registers, so we don't save/restore them + * clobber our EX_CONTEXT_K_x registers, so we don't save/restore them * (other than to advance the PC on return). * * We have to manually validate the user vs kernel address range @@ -1766,7 +1766,7 @@ ENTRY(sys_cmpxchg) /* Do slow mtspr here so the following "mf" waits less. */ { move sp, r27 - mtspr EX_CONTEXT_1_0, r28 + mtspr SPR_EX_CONTEXT_K_0, r28 } mf @@ -1785,7 +1785,7 @@ ENTRY(sys_cmpxchg) } { move sp, r27 - mtspr EX_CONTEXT_1_0, r28 + mtspr SPR_EX_CONTEXT_K_0, r28 } iret @@ -1813,7 +1813,7 @@ ENTRY(sys_cmpxchg) #endif /* Issue the slow SPR here while the tns result is in flight. */ - mfspr r28, EX_CONTEXT_1_0 + mfspr r28, SPR_EX_CONTEXT_K_0 { addi r28, r28, 8 /* return to the instruction after the swint1 */ @@ -1901,7 +1901,7 @@ ENTRY(sys_cmpxchg) .Lcmpxchg64_mismatch: { move sp, r27 - mtspr EX_CONTEXT_1_0, r28 + mtspr SPR_EX_CONTEXT_K_0, r28 } mf { @@ -1982,8 +1982,13 @@ int_unalign: int_hand INT_PERF_COUNT, PERF_COUNT, \ op_handle_perf_interrupt, handle_nmi int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr +#if CONFIG_KERNEL_PL == 2 + dc_dispatch INT_INTCTRL_2, INTCTRL_2 + int_hand INT_INTCTRL_1, INTCTRL_1, bad_intr +#else int_hand INT_INTCTRL_2, INTCTRL_2, bad_intr dc_dispatch INT_INTCTRL_1, INTCTRL_1 +#endif int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \ hv_message_intr, handle_interrupt_downcall |