diff options
Diffstat (limited to 'arch/x86/boot/compressed')
| -rw-r--r-- | arch/x86/boot/compressed/.gitignore | 3 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/Makefile | 54 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/head_32.S | 194 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/head_64.S | 169 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/misc.c | 12 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/mkpiggy.c | 97 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/vmlinux.lds.S (renamed from arch/x86/boot/compressed/vmlinux_64.lds) | 29 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/vmlinux.scr | 10 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/vmlinux_32.lds | 43 |
9 files changed, 324 insertions, 287 deletions
diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore index 63eff3b..4a46fab 100644 --- a/arch/x86/boot/compressed/.gitignore +++ b/arch/x86/boot/compressed/.gitignore @@ -1,3 +1,6 @@ relocs vmlinux.bin.all vmlinux.relocs +vmlinux.lds +mkpiggy +piggy.S diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index 65551c9..49c8a4c 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -19,7 +19,9 @@ KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ LDFLAGS := -m elf_$(UTS_MACHINE) LDFLAGS_vmlinux := -T -$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE +hostprogs-y := mkpiggy + +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE $(call if_changed,ld) @: @@ -29,7 +31,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE targets += vmlinux.bin.all vmlinux.relocs relocs -hostprogs-$(CONFIG_X86_32) += relocs +hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs quiet_cmd_relocs = RELOCS $@ cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $< @@ -37,46 +39,22 @@ $(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE $(call if_changed,relocs) vmlinux.bin.all-y := $(obj)/vmlinux.bin -vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs -quiet_cmd_relocbin = BUILD $@ - cmd_relocbin = cat $(filter-out FORCE,$^) > $@ -$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE - $(call if_changed,relocbin) - -ifeq ($(CONFIG_X86_32),y) +vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs -ifdef CONFIG_RELOCATABLE -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE - $(call if_changed,gzip) -$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE - $(call if_changed,bzip2) -$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE - $(call if_changed,lzma) -else -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE +$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE $(call if_changed,gzip) -$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE +$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE $(call if_changed,bzip2) -$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE +$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzma) -endif -LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T -else +suffix-$(CONFIG_KERNEL_GZIP) := gz +suffix-$(CONFIG_KERNEL_BZIP2) := bz2 +suffix-$(CONFIG_KERNEL_LZMA) := lzma -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) -$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE - $(call if_changed,bzip2) -$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE - $(call if_changed,lzma) - -LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T -endif +quiet_cmd_mkpiggy = MKPIGGY $@ + cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false ) -suffix_$(CONFIG_KERNEL_GZIP) = gz -suffix_$(CONFIG_KERNEL_BZIP2) = bz2 -suffix_$(CONFIG_KERNEL_LZMA) = lzma - -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE - $(call if_changed,ld) +targets += piggy.S +$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE + $(call if_changed,mkpiggy) diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index 3a8a866..75e4f00 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -12,16 +12,16 @@ * the page directory. [According to comments etc elsewhere on a compressed * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] * - * Page 0 is deliberately kept safe, since System Management Mode code in + * Page 0 is deliberately kept safe, since System Management Mode code in * laptops may need to access the BIOS data stored there. This is also - * useful for future device drivers that either access the BIOS via VM86 + * useful for future device drivers that either access the BIOS via VM86 * mode. */ /* * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ -.text + .text #include <linux/linkage.h> #include <asm/segment.h> @@ -29,161 +29,151 @@ #include <asm/boot.h> #include <asm/asm-offsets.h> -.section ".text.head","ax",@progbits + .section ".text.head","ax",@progbits ENTRY(startup_32) cld - /* test KEEP_SEGMENTS flag to see if the bootloader is asking - * us to not reload segments */ - testb $(1<<6), BP_loadflags(%esi) - jnz 1f + /* + * Test KEEP_SEGMENTS flag to see if the bootloader is asking + * us to not reload segments + */ + testb $(1<<6), BP_loadflags(%esi) + jnz 1f cli - movl $(__BOOT_DS),%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%fs - movl %eax,%gs - movl %eax,%ss + movl $__BOOT_DS, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %fs + movl %eax, %gs + movl %eax, %ss 1: -/* Calculate the delta between where we were compiled to run +/* + * Calculate the delta between where we were compiled to run * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode * data at 0x1e4 (defined as a scratch field) are used as the stack * for this calculation. Only 4 bytes are needed. */ - leal (0x1e4+4)(%esi), %esp - call 1f -1: popl %ebp - subl $1b, %ebp + leal (BP_scratch+4)(%esi), %esp + call 1f +1: popl %ebp + subl $1b, %ebp -/* %ebp contains the address we are loaded at by the boot loader and %ebx +/* + * %ebp contains the address we are loaded at by the boot loader and %ebx * contains the address where we should move the kernel image temporarily * for safe in-place decompression. */ #ifdef CONFIG_RELOCATABLE - movl %ebp, %ebx - addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx - andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx + movl %ebp, %ebx + movl BP_kernel_alignment(%esi), %eax + decl %eax + addl %eax, %ebx + notl %eax + andl %eax, %ebx #else - movl $LOAD_PHYSICAL_ADDR, %ebx + movl $LOAD_PHYSICAL_ADDR, %ebx #endif - /* Replace the compressed data size with the uncompressed size */ - subl input_len(%ebp), %ebx - movl output_len(%ebp), %eax - addl %eax, %ebx - /* Add 8 bytes for every 32K input block */ - shrl $12, %eax - addl %eax, %ebx - /* Add 32K + 18 bytes of extra slack */ - addl $(32768 + 18), %ebx - /* Align on a 4K boundary */ - addl $4095, %ebx - andl $~4095, %ebx - -/* Copy the compressed kernel to the end of our buffer + /* Target address to relocate to for decompression */ + addl $z_extract_offset, %ebx + + /* Set up the stack */ + leal boot_stack_end(%ebx), %esp + + /* Zero EFLAGS */ + pushl $0 + popfl + +/* + * Copy the compressed kernel to the end of our buffer * where decompression in place becomes safe. */ - pushl %esi - leal _end(%ebp), %esi - leal _end(%ebx), %edi - movl $(_end - startup_32), %ecx + pushl %esi + leal (_bss-4)(%ebp), %esi + leal (_bss-4)(%ebx), %edi + movl $(_bss - startup_32), %ecx + shrl $2, %ecx std - rep - movsb + rep movsl cld - popl %esi - -/* Compute the kernel start address. - */ -#ifdef CONFIG_RELOCATABLE - addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp - andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp -#else - movl $LOAD_PHYSICAL_ADDR, %ebp -#endif + popl %esi /* * Jump to the relocated address. */ - leal relocated(%ebx), %eax - jmp *%eax + leal relocated(%ebx), %eax + jmp *%eax ENDPROC(startup_32) -.section ".text" + .text relocated: /* - * Clear BSS - */ - xorl %eax,%eax - leal _edata(%ebx),%edi - leal _end(%ebx), %ecx - subl %edi,%ecx - cld - rep - stosb - -/* - * Setup the stack for the decompressor + * Clear BSS (stack is currently empty) */ - leal boot_stack_end(%ebx), %esp + xorl %eax, %eax + leal _bss(%ebx), %edi + leal _ebss(%ebx), %ecx + subl %edi, %ecx + shrl $2, %ecx + rep stosl /* * Do the decompression, and jump to the new kernel.. */ - movl output_len(%ebx), %eax - pushl %eax - # push arguments for decompress_kernel: - pushl %ebp # output address - movl input_len(%ebx), %eax - pushl %eax # input_len - leal input_data(%ebx), %eax - pushl %eax # input_data - leal boot_heap(%ebx), %eax - pushl %eax # heap area - pushl %esi # real mode pointer - call decompress_kernel - addl $20, %esp - popl %ecx + leal z_extract_offset_negative(%ebx), %ebp + /* push arguments for decompress_kernel: */ + pushl %ebp /* output address */ + pushl $z_input_len /* input_len */ + leal input_data(%ebx), %eax + pushl %eax /* input_data */ + leal boot_heap(%ebx), %eax + pushl %eax /* heap area */ + pushl %esi /* real mode pointer */ + call decompress_kernel + addl $20, %esp #if CONFIG_RELOCATABLE -/* Find the address of the relocations. +/* + * Find the address of the relocations. */ - movl %ebp, %edi - addl %ecx, %edi + leal z_output_len(%ebp), %edi -/* Calculate the delta between where vmlinux was compiled to run +/* + * Calculate the delta between where vmlinux was compiled to run * and where it was actually loaded. */ - movl %ebp, %ebx - subl $LOAD_PHYSICAL_ADDR, %ebx - jz 2f /* Nothing to be done if loaded at compiled addr. */ + movl %ebp, %ebx + subl $LOAD_PHYSICAL_ADDR, %ebx + jz 2f /* Nothing to be done if loaded at compiled addr. */ /* * Process relocations. */ -1: subl $4, %edi - movl 0(%edi), %ecx - testl %ecx, %ecx - jz 2f - addl %ebx, -__PAGE_OFFSET(%ebx, %ecx) - jmp 1b +1: subl $4, %edi + movl (%edi), %ecx + testl %ecx, %ecx + jz 2f + addl %ebx, -__PAGE_OFFSET(%ebx, %ecx) + jmp 1b 2: #endif /* * Jump to the decompressed kernel. */ - xorl %ebx,%ebx - jmp *%ebp + xorl %ebx, %ebx + jmp *%ebp -.bss -/* Stack and heap for uncompression */ -.balign 4 +/* + * Stack and heap for uncompression + */ + .bss + .balign 4 boot_heap: .fill BOOT_HEAP_SIZE, 1, 0 boot_stack: diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index ed4a829..f62c284 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -21,8 +21,8 @@ /* * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ -.code32 -.text + .code32 + .text #include <linux/linkage.h> #include <asm/segment.h> @@ -33,12 +33,14 @@ #include <asm/processor-flags.h> #include <asm/asm-offsets.h> -.section ".text.head" + .section ".text.head" .code32 ENTRY(startup_32) cld - /* test KEEP_SEGMENTS flag to see if the bootloader is asking - * us to not reload segments */ + /* + * Test KEEP_SEGMENTS flag to see if the bootloader is asking + * us to not reload segments + */ testb $(1<<6), BP_loadflags(%esi) jnz 1f @@ -49,14 +51,15 @@ ENTRY(startup_32) movl %eax, %ss 1: -/* Calculate the delta between where we were compiled to run +/* + * Calculate the delta between where we were compiled to run * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode * data at 0x1e4 (defined as a scratch field) are used as the stack * for this calculation. Only 4 bytes are needed. */ - leal (0x1e4+4)(%esi), %esp + leal (BP_scratch+4)(%esi), %esp call 1f 1: popl %ebp subl $1b, %ebp @@ -70,32 +73,28 @@ ENTRY(startup_32) testl %eax, %eax jnz no_longmode -/* Compute the delta between where we were compiled to run at +/* + * Compute the delta between where we were compiled to run at * and where the code will actually run at. - */ -/* %ebp contains the address we are loaded at by the boot loader and %ebx + * + * %ebp contains the address we are loaded at by the boot loader and %ebx * contains the address where we should move the kernel image temporarily * for safe in-place decompression. */ #ifdef CONFIG_RELOCATABLE movl %ebp, %ebx - addl $(PMD_PAGE_SIZE -1), %ebx - andl $PMD_PAGE_MASK, %ebx + movl BP_kernel_alignment(%esi), %eax + decl %eax + addl %eax, %ebx + notl %eax + andl %eax, %ebx #else - movl $CONFIG_PHYSICAL_START, %ebx + movl $LOAD_PHYSICAL_ADDR, %ebx #endif - /* Replace the compressed data size with the uncompressed size */ - subl input_len(%ebp), %ebx - movl output_len(%ebp), %eax - addl %eax, %ebx - /* Add 8 bytes for every 32K input block */ - shrl $12, %eax - addl %eax, %ebx - /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */ - addl $(32768 + 18 + 4095), %ebx - andl $~4095, %ebx + /* Target address to relocate to for decompression */ + addl $z_extract_offset, %ebx /* * Prepare for entering 64 bit mode @@ -114,7 +113,7 @@ ENTRY(startup_32) /* * Build early 4G boot pagetable */ - /* Initialize Page tables to 0*/ + /* Initialize Page tables to 0 */ leal pgtable(%ebx), %edi xorl %eax, %eax movl $((4096*6)/4), %ecx @@ -155,7 +154,8 @@ ENTRY(startup_32) btsl $_EFER_LME, %eax wrmsr - /* Setup for the jump to 64bit mode + /* + * Setup for the jump to 64bit mode * * When the jump is performend we will be in long mode but * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1 @@ -184,7 +184,8 @@ no_longmode: #include "../../kernel/verify_cpu_64.S" - /* Be careful here startup_64 needs to be at a predictable + /* + * Be careful here startup_64 needs to be at a predictable * address so I can export it in an ELF header. Bootloaders * should look at the ELF header to find this address, as * it may change in the future. @@ -192,7 +193,8 @@ no_longmode: .code64 .org 0x200 ENTRY(startup_64) - /* We come here either from startup_32 or directly from a + /* + * We come here either from startup_32 or directly from a * 64bit bootloader. If we come here from a bootloader we depend on * an identity mapped page table being provied that maps our * entire text+data+bss and hopefully all of memory. @@ -209,50 +211,54 @@ ENTRY(startup_64) movl $0x20, %eax ltr %ax - /* Compute the decompressed kernel start address. It is where + /* + * Compute the decompressed kernel start address. It is where * we were loaded at aligned to a 2M boundary. %rbp contains the * decompressed kernel start address. * * If it is a relocatable kernel then decompress and run the kernel * from load address aligned to 2MB addr, otherwise decompress and - * run the kernel from CONFIG_PHYSICAL_START + * run the kernel from LOAD_PHYSICAL_ADDR + * + * We cannot rely on the calculation done in 32-bit mode, since we + * may have been invoked via the 64-bit entry point. */ /* Start with the delta to where the kernel will run at. */ #ifdef CONFIG_RELOCATABLE leaq startup_32(%rip) /* - $startup_32 */, %rbp - addq $(PMD_PAGE_SIZE - 1), %rbp - andq $PMD_PAGE_MASK, %rbp - movq %rbp, %rbx + movl BP_kernel_alignment(%rsi), %eax + decl %eax + addq %rax, %rbp + notq %rax + andq %rax, %rbp #else - movq $CONFIG_PHYSICAL_START, %rbp - movq %rbp, %rbx + movq $LOAD_PHYSICAL_ADDR, %rbp #endif - /* Replace the compressed data size with the uncompressed size */ - movl input_len(%rip), %eax - subq %rax, %rbx - movl output_len(%rip), %eax - addq %rax, %rbx - /* Add 8 bytes for every 32K input block */ - shrq $12, %rax - addq %rax, %rbx - /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */ - addq $(32768 + 18 + 4095), %rbx - andq $~4095, %rbx - -/* Copy the compressed kernel to the end of our buffer + /* Target address to relocate to for decompression */ + leaq z_extract_offset(%rbp), %rbx + + /* Set up the stack */ + leaq boot_stack_end(%rbx), %rsp + + /* Zero EFLAGS */ + pushq $0 + popfq + +/* + * Copy the compressed kernel to the end of our buffer * where decompression in place becomes safe. */ - leaq _end_before_pgt(%rip), %r8 - leaq _end_before_pgt(%rbx), %r9 - movq $_end_before_pgt /* - $startup_32 */, %rcx -1: subq $8, %r8 - subq $8, %r9 - movq 0(%r8), %rax - movq %rax, 0(%r9) - subq $8, %rcx - jnz 1b + pushq %rsi + leaq (_bss-8)(%rip), %rsi + leaq (_bss-8)(%rbx), %rdi + movq $_bss /* - $startup_32 */, %rcx + shrq $3, %rcx + std + rep movsq + cld + popq %rsi /* * Jump to the relocated address. @@ -260,37 +266,28 @@ ENTRY(startup_64) leaq relocated(%rbx), %rax jmp *%rax -.section ".text" + .text relocated: /* - * Clear BSS + * Clear BSS (stack is currently empty) */ - xorq %rax, %rax - leaq _edata(%rbx), %rdi - leaq _end_before_pgt(%rbx), %rcx + xorl %eax, %eax + leaq _bss(%rip), %rdi + leaq _ebss(%rip), %rcx subq %rdi, %rcx - cld - rep - stosb - - /* Setup the stack */ - leaq boot_stack_end(%rip), %rsp - - /* zero EFLAGS after setting rsp */ - pushq $0 - popfq + shrq $3, %rcx + rep stosq /* * Do the decompression, and jump to the new kernel.. */ - pushq %rsi # Save the real mode argument - movq %rsi, %rdi # real mode address - leaq boot_heap(%rip), %rsi # malloc area for uncompression - leaq input_data(%rip), %rdx # input_data - movl input_len(%rip), %eax - movq %rax, %rcx # input_len - movq %rbp, %r8 # output + pushq %rsi /* Save the real mode argument */ + movq %rsi, %rdi /* real mode address */ + leaq boot_heap(%rip), %rsi /* malloc area for uncompression */ + leaq input_data(%rip), %rdx /* input_data */ + movl $z_input_len, %ecx /* input_len */ + movq %rbp, %r8 /* output target address */ call decompress_kernel popq %rsi @@ -311,11 +308,21 @@ gdt: .quad 0x0000000000000000 /* TS continued */ gdt_end: -.bss -/* Stack and heap for uncompression */ -.balign 4 +/* + * Stack and heap for uncompression + */ + .bss + .balign 4 boot_heap: .fill BOOT_HEAP_SIZE, 1, 0 boot_stack: .fill BOOT_STACK_SIZE, 1, 0 boot_stack_end: + +/* + * Space for page tables (not in .bss so not zeroed) + */ + .section ".pgtable","a",@nobits + .balign 4096 +pgtable: + .fill 6*4096, 1, 0 diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index e45be73..842b2a3 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -325,21 +325,19 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, free_mem_ptr = heap; /* Heap */ free_mem_end_ptr = heap + BOOT_HEAP_SIZE; + if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1)) + error("Destination address inappropriately aligned"); #ifdef CONFIG_X86_64 - if ((unsigned long)output & (__KERNEL_ALIGN - 1)) - error("Destination address not 2M aligned"); - if ((unsigned long)output >= 0xffffffffffUL) + if (heap > 0x3fffffffffffUL) error("Destination address too large"); #else - if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1)) - error("Destination address not CONFIG_PHYSICAL_ALIGN aligned"); if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff)) error("Destination address too large"); +#endif #ifndef CONFIG_RELOCATABLE - if ((u32)output != LOAD_PHYSICAL_ADDR) + if ((unsigned long)output != LOAD_PHYSICAL_ADDR) error("Wrong destination address"); #endif -#endif if (!quiet) putstr("\nDecompressing Linux... "); diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c new file mode 100644 index 0000000..bcbd36c --- /dev/null +++ b/arch/x86/boot/compressed/mkpiggy.c @@ -0,0 +1,97 @@ +/* ----------------------------------------------------------------------- * + * + * Copyright (C) 2009 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * H. Peter Anvin <hpa@linux.intel.com> + * + * ----------------------------------------------------------------------- */ + +/* + * Compute the desired load offset from a compressed program; outputs + * a small assembly wrapper with the appropriate symbols defined. + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <inttypes.h> + +static uint32_t getle32(const void *p) +{ + const uint8_t *cp = p; + + return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) + + ((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24); +} + +int main(int argc, char *argv[]) +{ + uint32_t olen; + long ilen; + unsigned long offs; + FILE *f; + + if (argc < 2) { + fprintf(stderr, "Usage: %s compressed_file\n", argv[0]); + return 1; + } + + /* Get the information for the compressed kernel image first */ + + f = fopen(argv[1], "r"); + if (!f) { + perror(argv[1]); + return 1; + } + + + if (fseek(f, -4L, SEEK_END)) { + perror(argv[1]); + } + fread(&olen, sizeof olen, 1, f); + ilen = ftell(f); + olen = getle32(&olen); + fclose(f); + + /* + * Now we have the input (compressed) and output (uncompressed) + * sizes, compute the necessary decompression offset... + */ + + offs = (olen > ilen) ? olen - ilen : 0; + offs += olen >> 12; /* Add 8 bytes for each 32K block */ + offs += 32*1024 + 18; /* Add 32K + 18 bytes slack */ + offs = (offs+4095) & ~4095; /* Round to a 4K boundary */ + + printf(".section \".rodata.compressed\",\"a\",@progbits\n"); + printf(".globl z_input_len\n"); + printf("z_input_len = %lu\n", ilen); + printf(".globl z_output_len\n"); + printf("z_output_len = %lu\n", (unsigned long)olen); + printf(".globl z_extract_offset\n"); + printf("z_extract_offset = 0x%lx\n", offs); + /* z_extract_offset_negative allows simplification of head_32.S */ + printf(".globl z_extract_offset_negative\n"); + printf("z_extract_offset_negative = -0x%lx\n", offs); + + printf(".globl input_data, input_data_end\n"); + printf("input_data:\n"); + printf(".incbin \"%s\"\n", argv[1]); + printf("input_data_end:\n"); + + return 0; +} diff --git a/arch/x86/boot/compressed/vmlinux_64.lds b/arch/x86/boot/compressed/vmlinux.lds.S index bef1ac8..cc353e1 100644 --- a/arch/x86/boot/compressed/vmlinux_64.lds +++ b/arch/x86/boot/compressed/vmlinux.lds.S @@ -1,6 +1,17 @@ -OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") +OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT) + +#undef i386 + +#include <asm/page_types.h> + +#ifdef CONFIG_X86_64 OUTPUT_ARCH(i386:x86-64) ENTRY(startup_64) +#else +OUTPUT_ARCH(i386) +ENTRY(startup_32) +#endif + SECTIONS { /* Be careful parts of head_64.S assume startup_32 is at @@ -33,16 +44,22 @@ SECTIONS *(.data.*) _edata = . ; } + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); .bss : { _bss = . ; *(.bss) *(.bss.*) *(COMMON) - . = ALIGN(8); - _end_before_pgt = . ; - . = ALIGN(4096); - pgtable = . ; - . = . + 4096 * 6; + . = ALIGN(8); /* For convenience during zeroing */ _ebss = .; } +#ifdef CONFIG_X86_64 + . = ALIGN(PAGE_SIZE); + .pgtable : { + _pgtable = . ; + *(.pgtable) + _epgtable = . ; + } +#endif + _end = .; } diff --git a/arch/x86/boot/compressed/vmlinux.scr b/arch/x86/boot/compressed/vmlinux.scr deleted file mode 100644 index f02382a..0000000 --- a/arch/x86/boot/compressed/vmlinux.scr +++ /dev/null @@ -1,10 +0,0 @@ -SECTIONS -{ - .rodata.compressed : { - input_len = .; - LONG(input_data_end - input_data) input_data = .; - *(.data) - output_len = . - 4; - input_data_end = .; - } -} diff --git a/arch/x86/boot/compressed/vmlinux_32.lds b/arch/x86/boot/compressed/vmlinux_32.lds deleted file mode 100644 index bb3c483..0000000 --- a/arch/x86/boot/compressed/vmlinux_32.lds +++ /dev/null @@ -1,43 +0,0 @@ -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) -ENTRY(startup_32) -SECTIONS -{ - /* Be careful parts of head_32.S assume startup_32 is at - * address 0. - */ - . = 0; - .text.head : { - _head = . ; - *(.text.head) - _ehead = . ; - } - .rodata.compressed : { - *(.rodata.compressed) - } - .text : { - _text = .; /* Text */ - *(.text) - *(.text.*) - _etext = . ; - } - .rodata : { - _rodata = . ; - *(.rodata) /* read-only data */ - *(.rodata.*) - _erodata = . ; - } - .data : { - _data = . ; - *(.data) - *(.data.*) - _edata = . ; - } - .bss : { - _bss = . ; - *(.bss) - *(.bss.*) - *(COMMON) - _end = . ; - } -} |