diff options
Diffstat (limited to 'arch/x86/kernel/entry_64.S')
| -rw-r--r-- | arch/x86/kernel/entry_64.S | 288 |
1 files changed, 48 insertions, 240 deletions
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 47b9581..b84cec5 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -19,8 +19,6 @@ * at the top of the kernel process stack. * * Some macro usage: - * - CFI macros are used to generate dwarf2 unwind information for better - * backtraces. They don't change any code. * - ENTRY/END Define functions in the symbol table. * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging. * - idtentry - Define exception entry points. @@ -30,7 +28,6 @@ #include <asm/segment.h> #include <asm/cache.h> #include <asm/errno.h> -#include <asm/dwarf2.h> #include <asm/calling.h> #include <asm/asm-offsets.h> #include <asm/msr.h> @@ -113,61 +110,6 @@ ENDPROC(native_usergs_sysret64) #endif /* - * empty frame - */ - .macro EMPTY_FRAME start=1 offset=0 - .if \start - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,8+\offset - .else - CFI_DEF_CFA_OFFSET 8+\offset - .endif - .endm - -/* - * initial frame state for interrupts (and exceptions without error code) - */ - .macro INTR_FRAME start=1 offset=0 - EMPTY_FRAME \start, 5*8+\offset - /*CFI_REL_OFFSET ss, 4*8+\offset*/ - CFI_REL_OFFSET rsp, 3*8+\offset - /*CFI_REL_OFFSET rflags, 2*8+\offset*/ - /*CFI_REL_OFFSET cs, 1*8+\offset*/ - CFI_REL_OFFSET rip, 0*8+\offset - .endm - -/* - * initial frame state for exceptions with error code (and interrupts - * with vector already pushed) - */ - .macro XCPT_FRAME start=1 offset=0 - INTR_FRAME \start, 1*8+\offset - .endm - -/* - * frame that enables passing a complete pt_regs to a C function. - */ - .macro DEFAULT_FRAME start=1 offset=0 - XCPT_FRAME \start, ORIG_RAX+\offset - CFI_REL_OFFSET rdi, RDI+\offset - CFI_REL_OFFSET rsi, RSI+\offset - CFI_REL_OFFSET rdx, RDX+\offset - CFI_REL_OFFSET rcx, RCX+\offset - CFI_REL_OFFSET rax, RAX+\offset - CFI_REL_OFFSET r8, R8+\offset - CFI_REL_OFFSET r9, R9+\offset - CFI_REL_OFFSET r10, R10+\offset - CFI_REL_OFFSET r11, R11+\offset - CFI_REL_OFFSET rbx, RBX+\offset - CFI_REL_OFFSET rbp, RBP+\offset - CFI_REL_OFFSET r12, R12+\offset - CFI_REL_OFFSET r13, R13+\offset - CFI_REL_OFFSET r14, R14+\offset - CFI_REL_OFFSET r15, R15+\offset - .endm - -/* * 64bit SYSCALL instruction entry. Up to 6 arguments in registers. * * 64bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11, @@ -196,12 +138,6 @@ ENDPROC(native_usergs_sysret64) */ ENTRY(system_call) - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,0 - CFI_REGISTER rip,rcx - /*CFI_REGISTER rflags,r11*/ - /* * Interrupts are off on entry. * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, @@ -219,8 +155,8 @@ GLOBAL(system_call_after_swapgs) movq PER_CPU_VAR(cpu_current_top_of_stack),%rsp /* Construct struct pt_regs on stack */ - pushq_cfi $__USER_DS /* pt_regs->ss */ - pushq_cfi PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */ + pushq $__USER_DS /* pt_regs->ss */ + pushq PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */ /* * Re-enable interrupts. * We use 'rsp_scratch' as a scratch space, hence irq-off block above @@ -229,22 +165,20 @@ GLOBAL(system_call_after_swapgs) * with using rsp_scratch: */ ENABLE_INTERRUPTS(CLBR_NONE) - pushq_cfi %r11 /* pt_regs->flags */ - pushq_cfi $__USER_CS /* pt_regs->cs */ - pushq_cfi %rcx /* pt_regs->ip */ - CFI_REL_OFFSET rip,0 - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rcx /* pt_regs->cx */ - pushq_cfi $-ENOSYS /* pt_regs->ax */ - pushq_cfi_reg r8 /* pt_regs->r8 */ - pushq_cfi_reg r9 /* pt_regs->r9 */ - pushq_cfi_reg r10 /* pt_regs->r10 */ - pushq_cfi_reg r11 /* pt_regs->r11 */ + pushq %r11 /* pt_regs->flags */ + pushq $__USER_CS /* pt_regs->cs */ + pushq %rcx /* pt_regs->ip */ + pushq %rax /* pt_regs->orig_ax */ + pushq %rdi /* pt_regs->di */ + pushq %rsi /* pt_regs->si */ + pushq %rdx /* pt_regs->dx */ + pushq %rcx /* pt_regs->cx */ + pushq $-ENOSYS /* pt_regs->ax */ + pushq %r8 /* pt_regs->r8 */ + pushq %r9 /* pt_regs->r9 */ + pushq %r10 /* pt_regs->r10 */ + pushq %r11 /* pt_regs->r11 */ sub $(6*8),%rsp /* pt_regs->bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 6*8 testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) jnz tracesys @@ -282,13 +216,9 @@ system_call_fastpath: testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) jnz int_ret_from_sys_call_irqs_off /* Go to the slow path */ - CFI_REMEMBER_STATE - RESTORE_C_REGS_EXCEPT_RCX_R11 movq RIP(%rsp),%rcx - CFI_REGISTER rip,rcx movq EFLAGS(%rsp),%r11 - /*CFI_REGISTER rflags,r11*/ movq RSP(%rsp),%rsp /* * 64bit SYSRET restores rip from rcx, @@ -307,8 +237,6 @@ system_call_fastpath: */ USERGS_SYSRET64 - CFI_RESTORE_STATE - /* Do syscall entry tracing */ tracesys: movq %rsp, %rdi @@ -374,9 +302,9 @@ int_careful: jnc int_very_careful TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - pushq_cfi %rdi + pushq %rdi SCHEDULE_USER - popq_cfi %rdi + popq %rdi DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF jmp int_with_check @@ -389,10 +317,10 @@ int_very_careful: /* Check for syscall exit trace */ testl $_TIF_WORK_SYSCALL_EXIT,%edx jz int_signal - pushq_cfi %rdi + pushq %rdi leaq 8(%rsp),%rdi # &ptregs -> arg1 call syscall_trace_leave - popq_cfi %rdi + popq %rdi andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi jmp int_restore_rest @@ -475,27 +403,21 @@ syscall_return: * perf profiles. Nothing jumps here. */ syscall_return_via_sysret: - CFI_REMEMBER_STATE /* rcx and r11 are already restored (see code above) */ RESTORE_C_REGS_EXCEPT_RCX_R11 movq RSP(%rsp),%rsp USERGS_SYSRET64 - CFI_RESTORE_STATE opportunistic_sysret_failed: SWAPGS jmp restore_c_regs_and_iret - CFI_ENDPROC END(system_call) .macro FORK_LIKE func ENTRY(stub_\func) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 /* offset 8: return address */ SAVE_EXTRA_REGS 8 jmp sys_\func - CFI_ENDPROC END(stub_\func) .endm @@ -504,8 +426,6 @@ END(stub_\func) FORK_LIKE vfork ENTRY(stub_execve) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 call sys_execve return_from_execve: testl %eax, %eax @@ -515,11 +435,9 @@ return_from_execve: 1: /* must use IRET code path (pt_regs->cs may have changed) */ addq $8, %rsp - CFI_ADJUST_CFA_OFFSET -8 ZERO_EXTRA_REGS movq %rax,RAX(%rsp) jmp int_ret_from_sys_call - CFI_ENDPROC END(stub_execve) /* * Remaining execve stubs are only 7 bytes long. @@ -527,32 +445,23 @@ END(stub_execve) */ .align 8 GLOBAL(stub_execveat) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 call sys_execveat jmp return_from_execve - CFI_ENDPROC END(stub_execveat) #if defined(CONFIG_X86_X32_ABI) || defined(CONFIG_IA32_EMULATION) .align 8 GLOBAL(stub_x32_execve) GLOBAL(stub32_execve) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 call compat_sys_execve jmp return_from_execve - CFI_ENDPROC END(stub32_execve) END(stub_x32_execve) .align 8 GLOBAL(stub_x32_execveat) GLOBAL(stub32_execveat) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 call compat_sys_execveat jmp return_from_execve - CFI_ENDPROC END(stub32_execveat) END(stub_x32_execveat) #endif @@ -562,8 +471,6 @@ END(stub_x32_execveat) * This cannot be done with SYSRET, so use the IRET return path instead. */ ENTRY(stub_rt_sigreturn) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 /* * SAVE_EXTRA_REGS result is not normally needed: * sigreturn overwrites all pt_regs->GPREGS. @@ -575,21 +482,16 @@ ENTRY(stub_rt_sigreturn) call sys_rt_sigreturn return_from_stub: addq $8, %rsp - CFI_ADJUST_CFA_OFFSET -8 RESTORE_EXTRA_REGS movq %rax,RAX(%rsp) jmp int_ret_from_sys_call - CFI_ENDPROC END(stub_rt_sigreturn) #ifdef CONFIG_X86_X32_ABI ENTRY(stub_x32_rt_sigreturn) - CFI_STARTPROC - DEFAULT_FRAME 0, 8 SAVE_EXTRA_REGS 8 call sys32_x32_rt_sigreturn jmp return_from_stub - CFI_ENDPROC END(stub_x32_rt_sigreturn) #endif @@ -599,12 +501,11 @@ END(stub_x32_rt_sigreturn) * rdi: prev task we switched from */ ENTRY(ret_from_fork) - DEFAULT_FRAME LOCK ; btr $TIF_FORK,TI_flags(%r8) - pushq_cfi $0x0002 - popfq_cfi # reset kernel eflags + pushq $0x0002 + popfq # reset kernel eflags call schedule_tail # rdi: 'prev' task parameter @@ -628,7 +529,6 @@ ENTRY(ret_from_fork) movl $0, RAX(%rsp) RESTORE_EXTRA_REGS jmp int_ret_from_sys_call - CFI_ENDPROC END(ret_from_fork) /* @@ -637,16 +537,13 @@ END(ret_from_fork) */ .align 8 ENTRY(irq_entries_start) - INTR_FRAME vector=FIRST_EXTERNAL_VECTOR .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) - pushq_cfi $(~vector+0x80) /* Note: always in signed byte range */ + pushq $(~vector+0x80) /* Note: always in signed byte range */ vector=vector+1 jmp common_interrupt - CFI_ADJUST_CFA_OFFSET -8 .align 8 .endr - CFI_ENDPROC END(irq_entries_start) /* @@ -688,17 +585,7 @@ END(irq_entries_start) movq %rsp, %rsi incl PER_CPU_VAR(irq_count) cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp - CFI_DEF_CFA_REGISTER rsi pushq %rsi - /* - * For debugger: - * "CFA (Current Frame Address) is the value on stack + offset" - */ - CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \ - 0x77 /* DW_OP_breg7 (rsp) */, 0, \ - 0x06 /* DW_OP_deref */, \ - 0x08 /* DW_OP_const1u */, SIZEOF_PTREGS-RBP, \ - 0x22 /* DW_OP_plus */ /* We entered an interrupt context - irqs are off: */ TRACE_IRQS_OFF @@ -711,7 +598,6 @@ END(irq_entries_start) */ .p2align CONFIG_X86_L1_CACHE_SHIFT common_interrupt: - XCPT_FRAME ASM_CLAC addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */ interrupt do_IRQ @@ -723,11 +609,8 @@ ret_from_intr: /* Restore saved previous stack */ popq %rsi - CFI_DEF_CFA rsi,SIZEOF_PTREGS-RBP /* reg/off reset after def_cfa_expr */ /* return code expects complete pt_regs - adjust rsp accordingly: */ leaq -RBP(%rsi),%rsp - CFI_DEF_CFA_REGISTER rsp - CFI_ADJUST_CFA_OFFSET RBP testb $3, CS(%rsp) jz retint_kernel @@ -743,7 +626,6 @@ retint_check: LOCKDEP_SYS_EXIT_IRQ movl TI_flags(%rcx),%edx andl %edi,%edx - CFI_REMEMBER_STATE jnz retint_careful retint_swapgs: /* return to user-space */ @@ -807,8 +689,8 @@ native_irq_return_iret: #ifdef CONFIG_X86_ESPFIX64 native_irq_return_ldt: - pushq_cfi %rax - pushq_cfi %rdi + pushq %rax + pushq %rdi SWAPGS movq PER_CPU_VAR(espfix_waddr),%rdi movq %rax,(0*8)(%rdi) /* RAX */ @@ -823,24 +705,23 @@ native_irq_return_ldt: movq (5*8)(%rsp),%rax /* RSP */ movq %rax,(4*8)(%rdi) andl $0xffff0000,%eax - popq_cfi %rdi + popq %rdi orq PER_CPU_VAR(espfix_stack),%rax SWAPGS movq %rax,%rsp - popq_cfi %rax + popq %rax jmp native_irq_return_iret #endif /* edi: workmask, edx: work */ retint_careful: - CFI_RESTORE_STATE bt $TIF_NEED_RESCHED,%edx jnc retint_signal TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - pushq_cfi %rdi + pushq %rdi SCHEDULE_USER - popq_cfi %rdi + popq %rdi GET_THREAD_INFO(%rcx) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF @@ -862,7 +743,6 @@ retint_signal: GET_THREAD_INFO(%rcx) jmp retint_with_reschedule - CFI_ENDPROC END(common_interrupt) /* @@ -870,13 +750,11 @@ END(common_interrupt) */ .macro apicinterrupt3 num sym do_sym ENTRY(\sym) - INTR_FRAME ASM_CLAC - pushq_cfi $~(\num) + pushq $~(\num) .Lcommon_\sym: interrupt \do_sym jmp ret_from_intr - CFI_ENDPROC END(\sym) .endm @@ -959,24 +837,17 @@ ENTRY(\sym) .error "using shift_ist requires paranoid=1" .endif - .if \has_error_code - XCPT_FRAME - .else - INTR_FRAME - .endif - ASM_CLAC PARAVIRT_ADJUST_EXCEPTION_FRAME .ifeq \has_error_code - pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ + pushq $-1 /* ORIG_RAX: no syscall to restart */ .endif ALLOC_PT_GPREGS_ON_STACK .if \paranoid .if \paranoid == 1 - CFI_REMEMBER_STATE testb $3, CS(%rsp) /* If coming from userspace, switch */ jnz 1f /* stacks. */ .endif @@ -986,8 +857,6 @@ ENTRY(\sym) .endif /* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */ - DEFAULT_FRAME 0 - .if \paranoid .if \shift_ist != -1 TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */ @@ -1023,7 +892,6 @@ ENTRY(\sym) .endif .if \paranoid == 1 - CFI_RESTORE_STATE /* * Paranoid entry from userspace. Switch stacks and treat it * as a normal entry. This means that paranoid handlers @@ -1032,7 +900,6 @@ ENTRY(\sym) 1: call error_entry - DEFAULT_FRAME 0 movq %rsp,%rdi /* pt_regs pointer */ call sync_regs @@ -1051,8 +918,6 @@ ENTRY(\sym) jmp error_exit /* %ebx: no swapgs flag */ .endif - - CFI_ENDPROC END(\sym) .endm @@ -1085,17 +950,15 @@ idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0 /* Reload gs selector with exception handling */ /* edi: new selector */ ENTRY(native_load_gs_index) - CFI_STARTPROC - pushfq_cfi + pushfq DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI) SWAPGS gs_change: movl %edi,%gs 2: mfence /* workaround */ SWAPGS - popfq_cfi + popfq ret - CFI_ENDPROC END(native_load_gs_index) _ASM_EXTABLE(gs_change,bad_gs) @@ -1110,22 +973,15 @@ bad_gs: /* Call softirq on interrupt stack. Interrupts are off. */ ENTRY(do_softirq_own_stack) - CFI_STARTPROC - pushq_cfi %rbp - CFI_REL_OFFSET rbp,0 + pushq %rbp mov %rsp,%rbp - CFI_DEF_CFA_REGISTER rbp incl PER_CPU_VAR(irq_count) cmove PER_CPU_VAR(irq_stack_ptr),%rsp push %rbp # backlink for old unwinder call __do_softirq leaveq - CFI_RESTORE rbp - CFI_DEF_CFA_REGISTER rsp - CFI_ADJUST_CFA_OFFSET -8 decl PER_CPU_VAR(irq_count) ret - CFI_ENDPROC END(do_softirq_own_stack) #ifdef CONFIG_XEN @@ -1145,28 +1001,22 @@ idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0 * activation and restart the handler using the previous one. */ ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) - CFI_STARTPROC /* * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will * see the correct pointer to the pt_regs */ movq %rdi, %rsp # we don't return, adjust the stack frame - CFI_ENDPROC - DEFAULT_FRAME 11: incl PER_CPU_VAR(irq_count) movq %rsp,%rbp - CFI_DEF_CFA_REGISTER rbp cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp pushq %rbp # backlink for old unwinder call xen_evtchn_do_upcall popq %rsp - CFI_DEF_CFA_REGISTER rsp decl PER_CPU_VAR(irq_count) #ifndef CONFIG_PREEMPT call xen_maybe_preempt_hcall #endif jmp error_exit - CFI_ENDPROC END(xen_do_hypervisor_callback) /* @@ -1183,16 +1033,8 @@ END(xen_do_hypervisor_callback) * with its current contents: any discrepancy means we in category 1. */ ENTRY(xen_failsafe_callback) - INTR_FRAME 1 (6*8) - /*CFI_REL_OFFSET gs,GS*/ - /*CFI_REL_OFFSET fs,FS*/ - /*CFI_REL_OFFSET es,ES*/ - /*CFI_REL_OFFSET ds,DS*/ - CFI_REL_OFFSET r11,8 - CFI_REL_OFFSET rcx,0 movl %ds,%ecx cmpw %cx,0x10(%rsp) - CFI_REMEMBER_STATE jne 1f movl %es,%ecx cmpw %cx,0x18(%rsp) @@ -1205,29 +1047,21 @@ ENTRY(xen_failsafe_callback) jne 1f /* All segments match their saved values => Category 2 (Bad IRET). */ movq (%rsp),%rcx - CFI_RESTORE rcx movq 8(%rsp),%r11 - CFI_RESTORE r11 addq $0x30,%rsp - CFI_ADJUST_CFA_OFFSET -0x30 - pushq_cfi $0 /* RIP */ - pushq_cfi %r11 - pushq_cfi %rcx + pushq $0 /* RIP */ + pushq %r11 + pushq %rcx jmp general_protection - CFI_RESTORE_STATE 1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */ movq (%rsp),%rcx - CFI_RESTORE rcx movq 8(%rsp),%r11 - CFI_RESTORE r11 addq $0x30,%rsp - CFI_ADJUST_CFA_OFFSET -0x30 - pushq_cfi $-1 /* orig_ax = -1 => not a system call */ + pushq $-1 /* orig_ax = -1 => not a system call */ ALLOC_PT_GPREGS_ON_STACK SAVE_C_REGS SAVE_EXTRA_REGS jmp error_exit - CFI_ENDPROC END(xen_failsafe_callback) apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ @@ -1263,7 +1097,6 @@ idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector( * Return: ebx=0: need swapgs on exit, ebx=1: otherwise */ ENTRY(paranoid_entry) - XCPT_FRAME 1 15*8 cld SAVE_C_REGS 8 SAVE_EXTRA_REGS 8 @@ -1275,7 +1108,6 @@ ENTRY(paranoid_entry) SWAPGS xorl %ebx,%ebx 1: ret - CFI_ENDPROC END(paranoid_entry) /* @@ -1290,7 +1122,6 @@ END(paranoid_entry) */ /* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */ ENTRY(paranoid_exit) - DEFAULT_FRAME DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF_DEBUG testl %ebx,%ebx /* swapgs needed? */ @@ -1305,7 +1136,6 @@ paranoid_exit_restore: RESTORE_C_REGS REMOVE_PT_GPREGS_FROM_STACK 8 INTERRUPT_RETURN - CFI_ENDPROC END(paranoid_exit) /* @@ -1313,7 +1143,6 @@ END(paranoid_exit) * Return: ebx=0: need swapgs on exit, ebx=1: otherwise */ ENTRY(error_entry) - XCPT_FRAME 1 15*8 cld SAVE_C_REGS 8 SAVE_EXTRA_REGS 8 @@ -1333,7 +1162,6 @@ error_sti: * for these here too. */ error_kernelspace: - CFI_REL_OFFSET rcx, RCX+8 incl %ebx leaq native_irq_return_iret(%rip),%rcx cmpq %rcx,RIP+8(%rsp) @@ -1357,13 +1185,11 @@ error_bad_iret: mov %rax,%rsp decl %ebx /* Return to usergs */ jmp error_sti - CFI_ENDPROC END(error_entry) /* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */ ENTRY(error_exit) - DEFAULT_FRAME movl %ebx,%eax RESTORE_EXTRA_REGS DISABLE_INTERRUPTS(CLBR_NONE) @@ -1377,12 +1203,10 @@ ENTRY(error_exit) andl %edi,%edx jnz retint_careful jmp retint_swapgs - CFI_ENDPROC END(error_exit) /* Runs on exception stack */ ENTRY(nmi) - INTR_FRAME PARAVIRT_ADJUST_EXCEPTION_FRAME /* * We allow breakpoints in NMIs. If a breakpoint occurs, then @@ -1417,8 +1241,7 @@ ENTRY(nmi) */ /* Use %rdx as our temp variable throughout */ - pushq_cfi %rdx - CFI_REL_OFFSET rdx, 0 + pushq %rdx /* * If %cs was not the kernel segment, then the NMI triggered in user @@ -1452,8 +1275,6 @@ ENTRY(nmi) jb first_nmi /* Ah, it is within the NMI stack, treat it as nested */ - CFI_REMEMBER_STATE - nested_nmi: /* * Do nothing if we interrupted the fixup in repeat_nmi. @@ -1471,26 +1292,22 @@ nested_nmi: /* Set up the interrupted NMIs stack to jump to repeat_nmi */ leaq -1*8(%rsp), %rdx movq %rdx, %rsp - CFI_ADJUST_CFA_OFFSET 1*8 leaq -10*8(%rsp), %rdx - pushq_cfi $__KERNEL_DS - pushq_cfi %rdx - pushfq_cfi - pushq_cfi $__KERNEL_CS - pushq_cfi $repeat_nmi + pushq $__KERNEL_DS + pushq %rdx + pushfq + pushq $__KERNEL_CS + pushq $repeat_nmi /* Put stack back */ addq $(6*8), %rsp - CFI_ADJUST_CFA_OFFSET -6*8 nested_nmi_out: - popq_cfi %rdx - CFI_RESTORE rdx + popq %rdx /* No need to check faults here */ INTERRUPT_RETURN - CFI_RESTORE_STATE first_nmi: /* * Because nested NMIs will use the pushed location that we @@ -1529,22 +1346,19 @@ first_nmi: */ /* Do not pop rdx, nested NMIs will corrupt that part of the stack */ movq (%rsp), %rdx - CFI_RESTORE rdx /* Set the NMI executing variable on the stack. */ - pushq_cfi $1 + pushq $1 /* * Leave room for the "copied" frame */ subq $(5*8), %rsp - CFI_ADJUST_CFA_OFFSET 5*8 /* Copy the stack frame to the Saved frame */ .rept 5 - pushq_cfi 11*8(%rsp) + pushq 11*8(%rsp) .endr - CFI_DEF_CFA_OFFSET 5*8 /* Everything up to here is safe from nested NMIs */ @@ -1567,12 +1381,10 @@ repeat_nmi: /* Make another copy, this one may be modified by nested NMIs */ addq $(10*8), %rsp - CFI_ADJUST_CFA_OFFSET -10*8 .rept 5 - pushq_cfi -6*8(%rsp) + pushq -6*8(%rsp) .endr subq $(5*8), %rsp - CFI_DEF_CFA_OFFSET 5*8 end_repeat_nmi: /* @@ -1580,7 +1392,7 @@ end_repeat_nmi: * NMI if the first NMI took an exception and reset our iret stack * so that we repeat another NMI. */ - pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ + pushq $-1 /* ORIG_RAX: no syscall to restart */ ALLOC_PT_GPREGS_ON_STACK /* @@ -1591,7 +1403,6 @@ end_repeat_nmi: * exceptions might do. */ call paranoid_entry - DEFAULT_FRAME 0 /* * Save off the CR2 register. If we take a page fault in the NMI then @@ -1628,13 +1439,10 @@ nmi_restore: /* Clear the NMI executing stack variable */ movq $0, 5*8(%rsp) jmp irq_return - CFI_ENDPROC END(nmi) ENTRY(ignore_sysret) - CFI_STARTPROC mov $-ENOSYS,%eax sysret - CFI_ENDPROC END(ignore_sysret) |