diff options
Diffstat (limited to 'arch/x86')
| -rw-r--r-- | arch/x86/Kconfig | 74 | ||||
| -rw-r--r-- | arch/x86/Makefile | 18 | ||||
| -rw-r--r-- | arch/x86/boot/compressed/misc.c | 4 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/boot.c | 4 | ||||
| -rw-r--r-- | arch/x86/kernel/io_apic_32.c | 9 | ||||
| -rw-r--r-- | arch/x86/kernel/mpparse.c | 73 | ||||
| -rw-r--r-- | arch/x86/kernel/numaq_32.c | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/summit_32.c | 2 | ||||
| -rw-r--r-- | arch/x86/mach-es7000/Makefile | 1 | ||||
| -rw-r--r-- | arch/x86/mach-es7000/es7000plat.c | 47 | ||||
| -rw-r--r-- | arch/x86/mach-generic/Makefile | 10 | ||||
| -rw-r--r-- | arch/x86/mach-generic/bigsmp.c | 2 | ||||
| -rw-r--r-- | arch/x86/mach-generic/numaq.c | 41 | ||||
| -rw-r--r-- | arch/x86/mach-generic/probe.c | 15 | ||||
| -rw-r--r-- | arch/x86/pci/Makefile_32 | 5 | ||||
| -rw-r--r-- | arch/x86/pci/numa.c | 29 |
16 files changed, 184 insertions, 152 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 9e97615..8b89810 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -268,36 +268,6 @@ config X86_VOYAGER If you do not specifically know you have a Voyager based machine, say N here, otherwise the kernel you build will not be bootable. -config X86_NUMAQ - bool "NUMAQ (IBM/Sequent)" - depends on SMP && X86_32 - select NUMA - help - This option is used for getting Linux to run on a (IBM/Sequent) NUMA - multiquad box. This changes the way that processors are bootstrapped, - and uses Clustered Logical APIC addressing mode instead of Flat Logical. - You will need a new lynxer.elf file to flash your firmware with - send - email to <Martin.Bligh@us.ibm.com>. - -config X86_SUMMIT - bool "Summit/EXA (IBM x440)" - depends on X86_32 && SMP - help - This option is needed for IBM systems that use the Summit/EXA chipset. - In particular, it is needed for the x440. - - If you don't have one of these computers, you should say N here. - If you want to build a NUMA kernel, you must select ACPI. - -config X86_BIGSMP - bool "Support for other sub-arch SMP systems with more than 8 CPUs" - depends on X86_32 && SMP - help - This option is needed for the systems that have more than 8 CPUs - and if the system is not of any sub-arch type above. - - If you don't have such a system, you should say N here. - config X86_VISWS bool "SGI 320/540 (Visual Workstation)" depends on X86_32 @@ -311,12 +281,33 @@ config X86_VISWS and vice versa. See <file:Documentation/sgi-visws.txt> for details. config X86_GENERICARCH - bool "Generic architecture (Summit, bigsmp, ES7000, default)" + bool "Generic architecture" depends on X86_32 help - This option compiles in the Summit, bigsmp, ES7000, default subarchitectures. - It is intended for a generic binary kernel. - If you want a NUMA kernel, select ACPI. We need SRAT for NUMA. + This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default + subarchitectures. It is intended for a generic binary kernel. + if you select them all, kernel will probe it one by one. and will + fallback to default. + +if X86_GENERICARCH + +config X86_NUMAQ + bool "NUMAQ (IBM/Sequent)" + depends on SMP && X86_32 + select NUMA + help + This option is used for getting Linux to run on a NUMAQ (IBM/Sequent) + NUMA multiquad box. This changes the way that processors are + bootstrapped, and uses Clustered Logical APIC addressing mode instead + of Flat Logical. You will need a new lynxer.elf file to flash your + firmware with - send email to <Martin.Bligh@us.ibm.com>. + +config X86_SUMMIT + bool "Summit/EXA (IBM x440)" + depends on X86_32 && SMP + help + This option is needed for IBM systems that use the Summit/EXA chipset. + In particular, it is needed for the x440. config X86_ES7000 bool "Support for Unisys ES7000 IA32 series" @@ -324,8 +315,15 @@ config X86_ES7000 help Support for Unisys ES7000 systems. Say 'Y' here if this kernel is supposed to run on an IA32-based Unisys ES7000 system. - Only choose this option if you have such a system, otherwise you - should say N here. + +config X86_BIGSMP + bool "Support for big SMP systems with more than 8 CPUs" + depends on X86_32 && SMP + help + This option is needed for the systems that have more than 8 CPUs + and if the system is not of any sub-arch type above. + +endif config X86_RDC321X bool "RDC R-321x SoC" @@ -913,9 +911,9 @@ config X86_PAE config NUMA bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)" depends on SMP - depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL) + depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || X86_SUMMIT && ACPI) && EXPERIMENTAL) default n if X86_PC - default y if (X86_NUMAQ || X86_SUMMIT) + default y if (X86_NUMAQ || X86_SUMMIT || X86_GENERICARCH) help Enable NUMA (Non Uniform Memory Access) support. The kernel will try to allocate memory used by a CPU on the diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 30b046b..d665013 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -117,29 +117,11 @@ mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager/ mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws/ -# NUMAQ subarch support -mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq -mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default/ - -# BIGSMP subarch support -mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp -mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default/ - -#Summit subarch support -mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit -mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default/ - # generic subarchitecture mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/ mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default/ - -# ES7000 subarch support -mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000 -fcore-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/ -mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default/ - # RDC R-321x subarch support mflags-$(CONFIG_X86_RDC321X) := -Iinclude/asm-x86/mach-rdc321x mcore-$(CONFIG_X86_RDC321X) := arch/x86/mach-default/ diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 90456ce..ba0be6a 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -221,10 +221,6 @@ static char *vidmem; static int vidport; static int lines, cols; -#ifdef CONFIG_X86_NUMAQ -void *xquad_portio; -#endif - #include "../../../../lib/inflate.c" static void *malloc(int size) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index f226bdc..7dc213004 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -848,7 +848,7 @@ static int __init acpi_parse_madt_lapic_entries(void) #ifdef CONFIG_X86_IO_APIC #define MP_ISA_BUS 0 -#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) +#ifdef CONFIG_X86_ES7000 extern int es7000_plat; #endif @@ -997,7 +997,7 @@ void __init mp_config_acpi_legacy_irqs(void) set_bit(MP_ISA_BUS, mp_bus_not_pci); Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); -#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) +#ifdef CONFIG_X86_ES7000 /* * Older generations of ES7000 have no legacy identity mappings */ diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 2285b81..97e62a0 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -1722,7 +1722,6 @@ void disable_IO_APIC(void) * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 */ -#ifndef CONFIG_X86_NUMAQ static void __init setup_ioapic_ids_from_mpc(void) { union IO_APIC_reg_00 reg_00; @@ -1732,6 +1731,11 @@ static void __init setup_ioapic_ids_from_mpc(void) unsigned char old_id; unsigned long flags; +#ifdef CONFIG_X86_NUMAQ + if (found_numaq) + return; +#endif + /* * Don't check I/O APIC IDs for xAPIC systems. They have * no meaning without the serial APIC bus. @@ -1828,9 +1832,6 @@ static void __init setup_ioapic_ids_from_mpc(void) apic_printk(APIC_VERBOSE, " ok.\n"); } } -#else -static void __init setup_ioapic_ids_from_mpc(void) { } -#endif int no_timer_check __initdata; diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 7591325..1cc7a4b 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -49,15 +49,73 @@ static int __init mpf_checksum(unsigned char *mp, int len) } #ifdef CONFIG_X86_NUMAQ +int found_numaq; /* * Have to match translation table entries to main table entries by counter * hence the mpc_record variable .... can't see a less disgusting way of * doing this .... */ +struct mpc_config_translation { + unsigned char mpc_type; + unsigned char trans_len; + unsigned char trans_type; + unsigned char trans_quad; + unsigned char trans_global; + unsigned char trans_local; + unsigned short trans_reserved; +}; + static int mpc_record; static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata; + +static inline int generate_logical_apicid(int quad, int phys_apicid) +{ + return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1); +} + + +static inline int mpc_apic_id(struct mpc_config_processor *m, + struct mpc_config_translation *translation_record) +{ + int quad = translation_record->trans_quad; + int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid); + + printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n", + m->mpc_apicid, + (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8, + (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, + m->mpc_apicver, quad, logical_apicid); + return logical_apicid; +} + +int mp_bus_id_to_node[MAX_MP_BUSSES]; + +int mp_bus_id_to_local[MAX_MP_BUSSES]; + +static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, + struct mpc_config_translation *translation) +{ + int quad = translation->trans_quad; + int local = translation->trans_local; + + mp_bus_id_to_node[m->mpc_busid] = quad; + mp_bus_id_to_local[m->mpc_busid] = local; + printk(KERN_INFO "Bus #%d is %s (node %d)\n", + m->mpc_busid, name, quad); +} + +int quad_local_to_mp_bus_id [NR_CPUS/4][4]; +static void mpc_oem_pci_bus(struct mpc_config_bus *m, + struct mpc_config_translation *translation) +{ + int quad = translation->trans_quad; + int local = translation->trans_local; + + quad_local_to_mp_bus_id[quad][local] = m->mpc_busid; +} + #endif static void __cpuinit MP_processor_info(struct mpc_config_processor *m) @@ -321,11 +379,11 @@ static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, } } -static inline void mps_oem_check(struct mp_config_table *mpc, char *oem, +void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid) { if (strncmp(oem, "IBM NUMA", 8)) - printk("Warning! May not be a NUMA-Q system!\n"); + printk("Warning! Not a NUMA-Q system!\n"); else found_numaq = 1; @@ -388,7 +446,16 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) return 0; #ifdef CONFIG_X86_32 - mps_oem_check(mpc, oem, str); + /* + * need to make sure summit and es7000's mps_oem_check is safe to be + * called early via genericarch 's mps_oem_check + */ + if (early) { +#ifdef CONFIG_X86_NUMAQ + numaq_mps_oem_check(mpc, oem, str); +#endif + } else + mps_oem_check(mpc, oem, str); #endif /* save the local APIC address, it might be non-default */ diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c index 27b9082..f0f1de1 100644 --- a/arch/x86/kernel/numaq_32.c +++ b/arch/x86/kernel/numaq_32.c @@ -36,8 +36,6 @@ #define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT)) -int found_numaq; - /* * Function: smp_dump_qct() * diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c index ae75109..d67ce5f 100644 --- a/arch/x86/kernel/summit_32.c +++ b/arch/x86/kernel/summit_32.c @@ -36,7 +36,9 @@ static struct rio_table_hdr *rio_table_hdr __initdata; static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata; static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata; +#ifndef CONFIG_X86_NUMAQ static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata; +#endif static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus) { diff --git a/arch/x86/mach-es7000/Makefile b/arch/x86/mach-es7000/Makefile index 69dd4da..3ef8b43 100644 --- a/arch/x86/mach-es7000/Makefile +++ b/arch/x86/mach-es7000/Makefile @@ -3,4 +3,3 @@ # obj-$(CONFIG_X86_ES7000) := es7000plat.o -obj-$(CONFIG_X86_GENERICARCH) := es7000plat.o diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c index a41c77a..4354ce8 100644 --- a/arch/x86/mach-es7000/es7000plat.c +++ b/arch/x86/mach-es7000/es7000plat.c @@ -177,53 +177,6 @@ find_unisys_acpi_oem_table(unsigned long *oem_addr) } #endif -/* - * This file also gets compiled if CONFIG_X86_GENERICARCH is set. Generic - * arch already has got following function definitions (asm-generic/es7000.c) - * hence no need to define these for that case. - */ -#ifndef CONFIG_X86_GENERICARCH -void es7000_sw_apic(void); -void __init enable_apic_mode(void) -{ - es7000_sw_apic(); - return; -} - -__init int mps_oem_check(struct mp_config_table *mpc, char *oem, - char *productid) -{ - if (mpc->mpc_oemptr) { - struct mp_config_oemtable *oem_table = - (struct mp_config_oemtable *)mpc->mpc_oemptr; - if (!strncmp(oem, "UNISYS", 6)) - return parse_unisys_oem((char *)oem_table); - } - return 0; -} -#ifdef CONFIG_ACPI -/* Hook from generic ACPI tables.c */ -int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - unsigned long oem_addr; - if (!find_unisys_acpi_oem_table(&oem_addr)) { - if (es7000_check_dsdt()) - return parse_unisys_oem((char *)oem_addr); - else { - setup_unisys(); - return 1; - } - } - return 0; -} -#else -int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - return 0; -} -#endif -#endif /* COFIG_X86_GENERICARCH */ - static void es7000_spin(int n) { diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile index 19d6d40..0dbd780 100644 --- a/arch/x86/mach-generic/Makefile +++ b/arch/x86/mach-generic/Makefile @@ -2,7 +2,11 @@ # Makefile for the generic architecture # -EXTRA_CFLAGS := -Iarch/x86/kernel +EXTRA_CFLAGS := -Iarch/x86/kernel -obj-y := probe.o summit.o bigsmp.o es7000.o default.o -obj-y += ../../x86/mach-es7000/ +obj-y := probe.o default.o +obj-$(CONFIG_X86_NUMAQ) += numaq.o +obj-$(CONFIG_X86_SUMMIT) += summit.o +obj-$(CONFIG_X86_BIGSMP) += bigsmp.o +obj-$(CONFIG_X86_ES7000) += es7000.o +obj-$(CONFIG_X86_ES7000) += ../../x86/mach-es7000/ diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c index 2a24301..59d7717 100644 --- a/arch/x86/mach-generic/bigsmp.c +++ b/arch/x86/mach-generic/bigsmp.c @@ -23,10 +23,8 @@ static int dmi_bigsmp; /* can be set by dmi scanners */ static int hp_ht_bigsmp(const struct dmi_system_id *d) { -#ifdef CONFIG_X86_GENERICARCH printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident); dmi_bigsmp = 1; -#endif return 0; } diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c new file mode 100644 index 0000000..8091e68 --- /dev/null +++ b/arch/x86/mach-generic/numaq.c @@ -0,0 +1,41 @@ +/* + * APIC driver for the IBM NUMAQ chipset. + */ +#define APIC_DEFINITION 1 +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/smp.h> +#include <asm/mpspec.h> +#include <asm/genapic.h> +#include <asm/fixmap.h> +#include <asm/apicdef.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/init.h> +#include <asm/mach-numaq/mach_apic.h> +#include <asm/mach-numaq/mach_apicdef.h> +#include <asm/mach-numaq/mach_ipi.h> +#include <asm/mach-numaq/mach_mpparse.h> +#include <asm/mach-numaq/mach_wakecpu.h> +#include <asm/numaq.h> + +static int mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid) +{ + numaq_mps_oem_check(mpc, oem, productid); + return found_numaq; +} + +static int probe_numaq(void) +{ + /* already know from get_memcfg_numaq() */ + return found_numaq; +} + +/* Hook from generic ACPI tables.c */ +static int acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + return 0; +} + +struct genapic apic_numaq = APIC_INIT("NUMAQ", probe_numaq); diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c index c5ae751..ba18dec 100644 --- a/arch/x86/mach-generic/probe.c +++ b/arch/x86/mach-generic/probe.c @@ -16,6 +16,7 @@ #include <asm/apicdef.h> #include <asm/genapic.h> +extern struct genapic apic_numaq; extern struct genapic apic_summit; extern struct genapic apic_bigsmp; extern struct genapic apic_es7000; @@ -24,9 +25,18 @@ extern struct genapic apic_default; struct genapic *genapic = &apic_default; static struct genapic *apic_probe[] __initdata = { +#ifdef CONFIG_X86_NUMAQ + &apic_numaq, +#endif +#ifdef CONFIG_X86_SUMMIT &apic_summit, +#endif +#ifdef CONFIG_X86_BIGSMP &apic_bigsmp, +#endif +#ifdef CONFIG_X86_ES7000 &apic_es7000, +#endif &apic_default, /* must be last */ NULL, }; @@ -54,6 +64,7 @@ early_param("apic", parse_apic); void __init generic_bigsmp_probe(void) { +#if CONFIG_X86_BIGSMP /* * This routine is used to switch to bigsmp mode when * - There is no apic= option specified by the user @@ -67,6 +78,7 @@ void __init generic_bigsmp_probe(void) printk(KERN_INFO "Overriding APIC driver with %s\n", genapic->name); } +#endif } void __init generic_apic_probe(void) @@ -88,7 +100,8 @@ void __init generic_apic_probe(void) /* These functions can switch the APIC even after the initial ->probe() */ -int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid) +int __init mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid) { int i; for (i = 0; apic_probe[i]; ++i) { diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32 index 89ec35d..962d96c 100644 --- a/arch/x86/pci/Makefile_32 +++ b/arch/x86/pci/Makefile_32 @@ -13,10 +13,11 @@ pci-y := fixup.o pci-$(CONFIG_ACPI) += acpi.o pci-y += legacy.o irq.o -# Careful: VISWS and NUMAQ overrule the pci-y above. The colons are +# Careful: VISWS overrule the pci-y above. The colons are # therefor correct. This needs a proper fix by distangling the code. pci-$(CONFIG_X86_VISWS) := visws.o fixup.o -pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o + +pci-$(CONFIG_X86_NUMAQ) += numa.o # Necessary for NUMAQ as well pci-$(CONFIG_NUMA) += mp_bus_to_node.o diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numa.c index d9afbae..99f1ecd 100644 --- a/arch/x86/pci/numa.c +++ b/arch/x86/pci/numa.c @@ -6,45 +6,21 @@ #include <linux/init.h> #include <linux/nodemask.h> #include <mach_apic.h> +#include <asm/mpspec.h> #include "pci.h" #define XQUAD_PORTIO_BASE 0xfe400000 #define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ -int mp_bus_id_to_node[MAX_MP_BUSSES]; #define BUS2QUAD(global) (mp_bus_id_to_node[global]) -int mp_bus_id_to_local[MAX_MP_BUSSES]; #define BUS2LOCAL(global) (mp_bus_id_to_local[global]) -void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, - struct mpc_config_translation *translation) -{ - int quad = translation->trans_quad; - int local = translation->trans_local; - - mp_bus_id_to_node[m->mpc_busid] = quad; - mp_bus_id_to_local[m->mpc_busid] = local; - printk(KERN_INFO "Bus #%d is %s (node %d)\n", - m->mpc_busid, name, quad); -} - -int quad_local_to_mp_bus_id [NR_CPUS/4][4]; #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local]) -void mpc_oem_pci_bus(struct mpc_config_bus *m, - struct mpc_config_translation *translation) -{ - int quad = translation->trans_quad; - int local = translation->trans_local; - - quad_local_to_mp_bus_id[quad][local] = m->mpc_busid; -} /* Where the IO area was mapped on multiquad, always 0 otherwise */ void *xquad_portio; -#ifdef CONFIG_X86_NUMAQ EXPORT_SYMBOL(xquad_portio); -#endif #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) @@ -179,6 +155,9 @@ static int __init pci_numa_init(void) { int quad; + if (!found_numaq) + return 0; + raw_pci_ops = &pci_direct_conf1_mq; if (pcibios_scanned++) |