diff options
Diffstat (limited to 'arch')
144 files changed, 1122 insertions, 1928 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index d5b9b5e..9944ded 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -18,6 +18,8 @@ config ALPHA select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_SMP_IDLE_THREAD select GENERIC_CMOS_UPDATE + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index 3bb7ffe..c2cbe4f 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -14,8 +14,8 @@ */ -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) -#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } +#define ATOMIC64_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic64_read(v) (*(volatile long *)&(v)->counter) diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h index db00f78..e477bcd 100644 --- a/arch/alpha/include/asm/fpu.h +++ b/arch/alpha/include/asm/fpu.h @@ -1,7 +1,9 @@ #ifndef __ASM_ALPHA_FPU_H #define __ASM_ALPHA_FPU_H +#ifdef __KERNEL__ #include <asm/special_insns.h> +#endif /* * Alpha floating-point control register defines: diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h index fd698a1..b87755a 100644 --- a/arch/alpha/include/asm/ptrace.h +++ b/arch/alpha/include/asm/ptrace.h @@ -76,7 +76,10 @@ struct switch_stack { #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1) -#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0) +#define current_pt_regs() \ + ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1) + +#define force_successful_syscall_return() (current_pt_regs()->r0 = 0) #endif diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h index dcb221a..7d2f75b 100644 --- a/arch/alpha/include/asm/socket.h +++ b/arch/alpha/include/asm/socket.h @@ -76,9 +76,11 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#ifdef __KERNEL__ /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. */ #define SOCK_NONBLOCK 0x40000000 +#endif /* __KERNEL__ */ #endif /* _ASM_SOCKET_H */ diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index b49ec2f..766fdfd 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -433,36 +433,12 @@ clear_user(void __user *to, long len) #undef __module_address #undef __module_call -/* Returns: -EFAULT if exception before terminator, N if the entire - buffer filled, else strlen. */ +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) -extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len); - -extern inline long -strncpy_from_user(char *to, const char __user *from, long n) -{ - long ret = -EFAULT; - if (__access_ok((unsigned long)from, 0, get_fs())) - ret = __strncpy_from_user(to, from, n); - return ret; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -extern long __strlen_user(const char __user *); - -extern inline long strlen_user(const char __user *str) -{ - return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0; -} - -/* Returns: 0 if exception before NUL or reaching the supplied limit (N), - * a value greater than N if the limit would be exceeded, else strlen. */ -extern long __strnlen_user(const char __user *, long); - -extern inline long strnlen_user(const char __user *str, long n) -{ - return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0; -} +extern long strncpy_from_user(char *dest, const char __user *src, long count); +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); /* * About the exception table: diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 633b23b..a31a78e 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -465,10 +465,12 @@ #define __NR_setns 501 #define __NR_accept4 502 #define __NR_sendmmsg 503 +#define __NR_process_vm_readv 504 +#define __NR_process_vm_writev 505 #ifdef __KERNEL__ -#define NR_SYSCALLS 504 +#define NR_SYSCALLS 506 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_STAT64 diff --git a/arch/alpha/include/asm/word-at-a-time.h b/arch/alpha/include/asm/word-at-a-time.h new file mode 100644 index 0000000..6b340d0 --- /dev/null +++ b/arch/alpha/include/asm/word-at-a-time.h @@ -0,0 +1,55 @@ +#ifndef _ASM_WORD_AT_A_TIME_H +#define _ASM_WORD_AT_A_TIME_H + +#include <asm/compiler.h> + +/* + * word-at-a-time interface for Alpha. + */ + +/* + * We do not use the word_at_a_time struct on Alpha, but it needs to be + * implemented to humour the generic code. + */ +struct word_at_a_time { + const unsigned long unused; +}; + +#define WORD_AT_A_TIME_CONSTANTS { 0 } + +/* Return nonzero if val has a zero */ +static inline unsigned long has_zero(unsigned long val, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long zero_locations = __kernel_cmpbge(0, val); + *bits = zero_locations; + return zero_locations; +} + +static inline unsigned long prep_zero_mask(unsigned long val, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +#define create_zero_mask(bits) (bits) + +static inline unsigned long find_zero(unsigned long bits) +{ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) + /* Simple if have CIX instructions */ + return __kernel_cttz(bits); +#else + unsigned long t1, t2, t3; + /* Retain lowest set bit only */ + bits &= -bits; + /* Binary search for lowest set bit */ + t1 = bits & 0xf0; + t2 = bits & 0xcc; + t3 = bits & 0xaa; + if (t1) t1 = 4; + if (t2) t2 = 2; + if (t3) t3 = 1; + return t1 + t2 + t3; +#endif +} + +#endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index d96e742..15fa821 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s); /* entry.S */ EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(kernel_execve); /* Networking helper routines. */ EXPORT_SYMBOL(csum_tcpudp_magic); @@ -74,8 +73,6 @@ EXPORT_SYMBOL(alpha_fp_emul); */ EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(__do_clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); /* * SMP-specific symbols. diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 6d159ce..ec0da05 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -663,58 +663,6 @@ kernel_thread: br ret_to_kernel .end kernel_thread -/* - * kernel_execve(path, argv, envp) - */ - .align 4 - .globl kernel_execve - .ent kernel_execve -kernel_execve: - /* We can be called from a module. */ - ldgp $gp, 0($27) - lda $sp, -(32+SIZEOF_PT_REGS+8)($sp) - .frame $sp, 32+SIZEOF_PT_REGS+8, $26, 0 - stq $26, 0($sp) - stq $16, 8($sp) - stq $17, 16($sp) - stq $18, 24($sp) - .prologue 1 - - lda $16, 32($sp) - lda $17, 0 - lda $18, SIZEOF_PT_REGS - bsr $26, memset !samegp - - /* Avoid the HAE being gratuitously wrong, which would cause us - to do the whole turn off interrupts thing and restore it. */ - ldq $2, alpha_mv+HAE_CACHE - stq $2, 152+32($sp) - - ldq $16, 8($sp) - ldq $17, 16($sp) - ldq $18, 24($sp) - lda $19, 32($sp) - bsr $26, do_execve !samegp - - ldq $26, 0($sp) - bne $0, 1f /* error! */ - - /* Move the temporary pt_regs struct from its current location - to the top of the kernel stack frame. See copy_thread for - details for a normal process. */ - lda $16, 0x4000 - SIZEOF_PT_REGS($8) - lda $17, 32($sp) - lda $18, SIZEOF_PT_REGS - bsr $26, memmove !samegp - - /* Take that over as our new stack frame and visit userland! */ - lda $sp, 0x4000 - SIZEOF_PT_REGS($8) - br $31, ret_from_sys_call - -1: lda $sp, 32+SIZEOF_PT_REGS+8($sp) - ret -.end kernel_execve - /* * Special system calls. Most of these are special in that they either @@ -797,115 +745,6 @@ sys_rt_sigreturn: .end sys_rt_sigreturn .align 4 - .globl sys_sethae - .ent sys_sethae -sys_sethae: - .prologue 0 - stq $16, 152($sp) - ret -.end sys_sethae - - .align 4 - .globl osf_getpriority - .ent osf_getpriority -osf_getpriority: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - jsr $26, sys_getpriority - - ldq $26, 0($sp) - blt $0, 1f - - /* Return value is the unbiased priority, i.e. 20 - prio. - This does result in negative return values, so signal - no error by writing into the R0 slot. */ - lda $1, 20 - stq $31, 16($sp) - subl $1, $0, $0 - unop - -1: lda $sp, 16($sp) - ret -.end osf_getpriority - - .align 4 - .globl sys_getxuid - .ent sys_getxuid -sys_getxuid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_UID($3) - ldl $1, CRED_EUID($3) - stq $1, 80($sp) - ret -.end sys_getxuid - - .align 4 - .globl sys_getxgid - .ent sys_getxgid -sys_getxgid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_GID($3) - ldl $1, CRED_EGID($3) - stq $1, 80($sp) - ret -.end sys_getxgid - - .align 4 - .globl sys_getxpid - .ent sys_getxpid -sys_getxpid: - .prologue 0 - ldq $2, TI_TASK($8) - - /* See linux/kernel/timer.c sys_getppid for discussion - about this loop. */ - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - ldl $0, TASK_TGID($2) -1: ldl $1, TASK_TGID($4) -#ifdef CONFIG_SMP - mov $4, $5 - mb - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - cmpeq $4, $5, $5 - beq $5, 1b -#endif - stq $1, 80($sp) - ret -.end sys_getxpid - - .align 4 - .globl sys_alpha_pipe - .ent sys_alpha_pipe -sys_alpha_pipe: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - mov $31, $17 - lda $16, 8($sp) - jsr $26, do_pipe_flags - - ldq $26, 0($sp) - bne $0, 1f - - /* The return values are in $0 and $20. */ - ldl $1, 12($sp) - ldl $0, 8($sp) - - stq $1, 80+16($sp) -1: lda $sp, 16($sp) - ret -.end sys_alpha_pipe - - .align 4 .globl sys_execve .ent sys_execve sys_execve: diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 98a1036..bc1acdd 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1404,3 +1404,52 @@ SYSCALL_DEFINE3(osf_writev, unsigned long, fd, } #endif + +SYSCALL_DEFINE2(osf_getpriority, int, which, int, who) +{ + int prio = sys_getpriority(which, who); + if (prio >= 0) { + /* Return value is the unbiased priority, i.e. 20 - prio. + This does result in negative return values, so signal + no error */ + force_successful_syscall_return(); + prio = 20 - prio; + } + return prio; +} + +SYSCALL_DEFINE0(getxuid) +{ + current_pt_regs()->r20 = sys_geteuid(); + return sys_getuid(); +} + +SYSCALL_DEFINE0(getxgid) +{ + current_pt_regs()->r20 = sys_getegid(); + return sys_getgid(); +} + +SYSCALL_DEFINE0(getxpid) +{ + current_pt_regs()->r20 = sys_getppid(); + return sys_getpid(); +} + +SYSCALL_DEFINE0(alpha_pipe) +{ + int fd[2]; + int res = do_pipe_flags(fd, 0); + if (!res) { + /* The return values are in $0 and $20. */ + current_pt_regs()->r20 = fd[1]; + res = fd[0]; + } + return res; +} + +SYSCALL_DEFINE1(sethae, unsigned long, val) +{ + current_pt_regs()->hae = val; + return 0; +} diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 153d3fc..d6fde98 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -455,3 +455,22 @@ get_wchan(struct task_struct *p) } return pc; } + +int kernel_execve(const char *path, const char *const argv[], const char *const envp[]) +{ + /* Avoid the HAE being gratuitously wrong, which would cause us + to do the whole turn off interrupts thing and restore it. */ + struct pt_regs regs = {.hae = alpha_mv.hae_cache}; + int err = do_execve(path, argv, envp, ®s); + if (!err) { + struct pt_regs *p = current_pt_regs(); + /* copy regs to normal position and off to userland we go... */ + *p = regs; + __asm__ __volatile__ ( + "mov %0, $sp;" + "br $31, ret_from_sys_call" + : : "r"(p)); + } + return err; +} +EXPORT_SYMBOL(kernel_execve); diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 8783523..2ac6b45 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -111,7 +111,7 @@ sys_call_table: .quad sys_socket .quad sys_connect .quad sys_accept - .quad osf_getpriority /* 100 */ + .quad sys_osf_getpriority /* 100 */ .quad sys_send .quad sys_recv .quad sys_sigreturn @@ -522,6 +522,8 @@ sys_call_table: .quad sys_setns .quad sys_accept4 .quad sys_sendmmsg + .quad sys_process_vm_readv + .quad sys_process_vm_writev /* 505 */ .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile index c0a83ab..5966074 100644 --- a/arch/alpha/lib/Makefile +++ b/arch/alpha/lib/Makefile @@ -31,8 +31,6 @@ lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ $(ev6-y)memchr.o \ $(ev6-y)copy_user.o \ $(ev6-y)clear_user.o \ - $(ev6-y)strncpy_from_user.o \ - $(ev67-y)strlen_user.o \ $(ev6-y)csum_ipv6_magic.o \ $(ev6-y)clear_page.o \ $(ev6-y)copy_page.o \ diff --git a/arch/alpha/lib/ev6-strncpy_from_user.S b/arch/alpha/lib/ev6-strncpy_from_user.S deleted file mode 100644 index d2e2817..0000000 --- a/arch/alpha/lib/ev6-strncpy_from_user.S +++ /dev/null @@ -1,424 +0,0 @@ -/* - * arch/alpha/lib/ev6-strncpy_from_user.S - * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * A bunch of instructions got moved and temp registers were changed - * to aid in scheduling. Control flow was also re-arranged to eliminate - * branches, and to provide longer code sequences to enable better scheduling. - * A total rewrite (using byte load/stores for start & tail sequences) - * is desirable, but very difficult to do without a from-scratch rewrite. - * Save that for the future. - */ - - -#include <asm/errno.h> -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 4 -__strncpy_from_user: - and a0, 7, t3 # E : find dest misalignment - beq a2, $zerolength # U : - - /* Are source and destination co-aligned? */ - mov a0, v0 # E : save the string start - xor a0, a1, t4 # E : - EX( ldq_u t1, 0(a1) ) # L : Latency=3 load first quadword - ldq_u t0, 0(a0) # L : load first (partial) aligned dest quadword - - addq a2, t3, a2 # E : bias count by dest misalignment - subq a2, 1, a3 # E : - addq zero, 1, t10 # E : - and t4, 7, t4 # E : misalignment between the two - - and a3, 7, t6 # E : number of tail bytes - sll t10, t6, t10 # E : t10 = bitmask of last count byte - bne t4, $unaligned # U : - lda t2, -1 # E : build a mask against false zero - - /* - * We are co-aligned; take care of a partial first word. - * On entry to this basic block: - * t0 == the first destination word for masking back in - * t1 == the first source word. - */ - - srl a3, 3, a2 # E : a2 = loop counter = (count - 1)/8 - addq a1, 8, a1 # E : - mskqh t2, a1, t2 # U : detection in the src word - nop - - /* Create the 1st output word and detect 0's in the 1st input word. */ - mskqh t1, a1, t3 # U : - mskql t0, a1, t0 # U : assemble the first output word - ornot t1, t2, t2 # E : - nop - - cmpbge zero, t2, t8 # E : bits set iff null found - or t0, t3, t0 # E : - beq a2, $a_eoc # U : - bne t8, $a_eos # U : 2nd branch in a quad. Bad. - - /* On entry to this basic block: - * t0 == a source quad not containing a null. - * a0 - current aligned destination address - * a1 - current aligned source address - * a2 - count of quadwords to move. - * NOTE: Loop improvement - unrolling this is going to be - * a huge win, since we're going to stall otherwise. - * Fix this later. For _really_ large copies, look - * at using wh64 on a look-ahead basis. See the code - * in clear_user.S and copy_user.S. - * Presumably, since (a0) and (a1) do not overlap (by C definition) - * Lots of nops here: - * - Separate loads from stores - * - Keep it to 1 branch/quadpack so the branch predictor - * can train. - */ -$a_loop: - stq_u t0, 0(a0) # L : - addq a0, 8, a0 # E : - nop - subq a2, 1, a2 # E : - - EX( ldq_u t0, 0(a1) ) # L : - addq a1, 8, a1 # E : - cmpbge zero, t0, t8 # E : Stall 2 cycles on t0 - beq a2, $a_eoc # U : - - beq t8, $a_loop # U : - nop - nop - nop - - /* Take care of the final (partial) word store. At this point - * the end-of-count bit is set in t8 iff it applies. - * - * On entry to this basic block we have: - * t0 == the source word containing the null - * t8 == the cmpbge mask that found it. - */ -$a_eos: - negq t8, t12 # E : find low bit set - and t8, t12, t12 # E : - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t12, t6, t8 # E : - zapnot t0, t8, t0 # U : clear src bytes > null - zap t1, t8, t1 # U : clear dst bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # L : - br $finish_up # L0 : - nop - nop - - /* Add the end-of-count bit to the eos detection bitmask. */ - .align 4 -$a_eoc: - or t10, t8, t8 - br $a_eos - nop - nop - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 4 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # L : load second src word - addq a1, 8, a1 # E : - mskql t0, a0, t0 # U : mask trailing garbage in dst - extqh t2, a1, t4 # U : - - or t1, t4, t1 # E : first aligned src word complete - mskqh t1, a0, t1 # U : mask leading garbage in src - or t0, t1, t0 # E : first output word complete - or t0, t6, t6 # E : mask original data for zero test - - cmpbge zero, t6, t8 # E : - beq a2, $u_eocfin # U : - bne t8, $u_final # U : bad news - 2nd branch in a quad - lda t6, -1 # E : mask out the bits we have - - mskql t6, a1, t6 # U : already seen - stq_u t0, 0(a0) # L : store first output word - or t6, t2, t2 # E : - cmpbge zero, t2, t8 # E : find nulls in second partial - - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - bne t8, $u_late_head_exit # U : - nop - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # U : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # L : read next high-order source word - addq a1, 8, a1 # E : - cmpbge zero, t2, t8 # E : - - beq a2, $u_eoc # U : - bne t8, $u_eos # U : - nop - nop - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - /* - * Extra nops here: - * separate load quads from store quads - * only one branch/quad to permit predictor training - */ - - .align 4 -$u_loop: - extqh t2, a1, t0 # U : extract high bits for current word - addq a1, 8, a1 # E : - extql t2, a1, t3 # U : extract low bits for next time - addq a0, 8, a0 # E : - - or t0, t1, t0 # E : current dst word now complete - EX( ldq_u t2, 0(a1) ) # L : load high word for next time - subq a2, 1, a2 # E : - nop - - stq_u t0, -8(a0) # L : save the current word - mov t3, t1 # E : - cmpbge zero, t2, t8 # E : test new word for eos - beq a2, $u_eoc # U : - - beq t8, $u_loop # U : - nop - nop - nop - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ - .align 4 -$u_eos: - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : first (partial) source word complete - cmpbge zero, t0, t8 # E : is the null in this first bit? - nop - - bne t8, $u_final # U : - stq_u t0, 0(a0) # L : the null was in the high-order bits - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - - .align 4 -$u_late_head_exit: - extql t2, a1, t0 # U : - cmpbge zero, t0, t8 # E : - or t8, t10, t6 # E : - cmoveq a2, t6, t8 # E : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ - .align 4 -$u_final: - negq t8, t6 # E : isolate low bit set - and t6, t8, t12 # E : - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t6, t12, t8 # E : - zapnot t0, t8, t0 # U : kill source bytes > null - zap t1, t8, t1 # U : kill dest bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # E : - br $finish_up # U : - nop - nop - - .align 4 -$u_eoc: # end-of-count - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : - cmpbge zero, t0, t8 # E : - nop - - .align 4 -$u_eocfin: # end-of-count, final word - or t10, t8, t8 # E : - br $u_final # U : - nop - nop - - /* Unaligned copy entry point. */ - .align 4 -$unaligned: - - srl a3, 3, a2 # U : a2 = loop counter = (count - 1)/8 - and a0, 7, t4 # E : find dest misalignment - and a1, 7, t5 # E : find src misalignment - mov zero, t0 # E : - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t6 # E : - beq t4, 1f # U : - ldq_u t0, 0(a0) # L : - lda t6, -1 # E : - - mskql t6, a0, t6 # E : - nop - nop - nop - - .align 4 -1: - subq a1, t4, a1 # E : sub dest misalignment from src addr - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - cmplt t4, t5, t12 # E : - extql t1, a1, t1 # U : shift src into place - lda t2, -1 # E : for creating masks later - - beq t12, $u_head # U : - mskqh t2, t5, t2 # U : begin src byte validity mask - cmpbge zero, t1, t8 # E : is there a zero? - nop - - extql t2, a1, t2 # U : - or t8, t10, t5 # E : test for end-of-count too - cmpbge zero, t2, t3 # E : - cmoveq a2, t5, t8 # E : Latency=2, extra map slot - - nop # E : goes with cmov - andnot t8, t3, t8 # E : - beq t8, $u_head # U : - nop - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # L : - negq t8, t6 # E : build bitmask of bytes <= zero - mskqh t1, t4, t1 # U : - and t6, t8, t12 # E : - - subq t12, 1, t6 # E : - or t6, t12, t8 # E : - zapnot t2, t8, t2 # U : prepare source word; mirror changes - zapnot t1, t8, t1 # U : to source validity mask - - andnot t0, t2, t0 # E : zero place for source to reside - or t0, t1, t0 # E : and put it there - stq_u t0, 0(a0) # L : - nop - - .align 4 -$finish_up: - zapnot t0, t12, t4 # U : was last byte written null? - and t12, 0xf0, t3 # E : binary search for the address of the - cmovne t4, 1, t4 # E : Latency=2, extra map slot - nop # E : with cmovne - - and t12, 0xcc, t2 # E : last byte written - and t12, 0xaa, t1 # E : - cmovne t3, 4, t3 # E : Latency=2, extra map slot - nop # E : with cmovne - - bic a0, 7, t0 - cmovne t2, 2, t2 # E : Latency=2, extra map slot - nop # E : with cmovne - nop - - cmovne t1, 1, t1 # E : Latency=2, extra map slot - nop # E : with cmovne - addq t0, t3, t0 # E : - addq t1, t2, t1 # E : - - addq t0, t1, t0 # E : - addq t0, t4, t0 # add one if we filled the buffer - subq t0, v0, v0 # find string length - ret # L0 : - - .align 4 -$zerolength: - nop - nop - nop - clr v0 - -$exception: - nop - nop - nop - ret - - .end __strncpy_from_user diff --git a/arch/alpha/lib/ev67-strlen_user.S b/arch/alpha/lib/ev67-strlen_user.S deleted file mode 100644 index 57e0d77..0000000 --- a/arch/alpha/lib/ev67-strlen_user.S +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/alpha/lib/ev67-strlen_user.S - * 21264 version contributed by Rick Gorton <rick.gorton@api-networks.com> - * - * Return the length of the string including the NULL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * Try not to change the actual algorithm if possible for consistency. - */ - -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 4 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - nop - nop - nop - - .globl __strnlen_user - - .align 4 -__strnlen_user: - .prologue 0 - EX( ldq_u t0, 0(a0) ) # L : load first quadword (a0 may be misaligned) - lda t1, -1(zero) # E : - - insqh t1, a0, t1 # U : - andnot a0, 7, v0 # E : - or t1, t0, t0 # E : - subq a0, 1, a0 # E : get our +1 for the return - - cmpbge zero, t0, t1 # E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 # E : - subq a0, v0, t0 # E : - bne t1, $found # U : - - addq t2, t0, t2 # E : - addq a1, 1, a1 # E : - nop # E : - nop # E : - - .align 4 -$loop: ble t2, $limit # U : - EX( ldq t0, 8(v0) ) # L : - nop # E : - nop # E : - - cmpbge zero, t0, t1 # E : - subq t2, 8, t2 # E : - addq v0, 8, v0 # E : addr += 8 - beq t1, $loop # U : - -$found: cttz t1, t2 # U0 : - addq v0, t2, v0 # E : - subq v0, a0, v0 # E : - ret # L0 : - -$exception: - nop - nop - nop - ret - - .align 4 # currently redundant -$limit: - nop - nop - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strlen_user.S b/arch/alpha/lib/strlen_user.S deleted file mode 100644 index 508a18e..0000000 --- a/arch/alpha/lib/strlen_user.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/alpha/lib/strlen_user.S - * - * Return the length of the string including the NUL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - */ - -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 3 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - - .globl __strnlen_user - - .align 3 -__strnlen_user: - .prologue 0 - - EX( ldq_u t0, 0(a0) ) # load first quadword (a0 may be misaligned) - lda t1, -1(zero) - insqh t1, a0, t1 - andnot a0, 7, v0 - or t1, t0, t0 - subq a0, 1, a0 # get our +1 for the return - cmpbge zero, t0, t1 # t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 - subq a0, v0, t0 - bne t1, $found - - addq t2, t0, t2 - addq a1, 1, a1 - - .align 3 -$loop: ble t2, $limit - EX( ldq t0, 8(v0) ) - subq t2, 8, t2 - addq v0, 8, v0 # addr += 8 - cmpbge zero, t0, t1 - beq t1, $loop - -$found: negq t1, t2 # clear all but least set bit - and t1, t2, t1 - - and t1, 0xf0, t2 # binary search for that set bit - and t1, 0xcc, t3 - and t1, 0xaa, t4 - cmovne t2, 4, t2 - cmovne t3, 2, t3 - cmovne t4, 1, t4 - addq t2, t3, t2 - addq v0, t4, v0 - addq v0, t2, v0 - nop # dual issue next two on ev4 and ev5 - subq v0, a0, v0 -$exception: - ret - - .align 3 # currently redundant -$limit: - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strncpy_from_user.S b/arch/alpha/lib/strncpy_from_user.S deleted file mode 100644 index 73ee211..0000000 --- a/arch/alpha/lib/strncpy_from_user.S +++ /dev/null @@ -1,339 +0,0 @@ -/* - * arch/alpha/lib/strncpy_from_user.S - * Contributed by Richard Henderson (rth@tamu.edu) - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - */ - - -#include <asm/errno.h> -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 3 -$aligned: - /* On entry to this basic block: - t0 == the first destination word for masking back in - t1 == the first source word. */ - - /* Create the 1st output word and detect 0's in the 1st input word. */ - lda t2, -1 # e1 : build a mask against false zero - mskqh t2, a1, t2 # e0 : detection in the src word - mskqh t1, a1, t3 # e0 : - ornot t1, t2, t2 # .. e1 : - mskql t0, a1, t0 # e0 : assemble the first output word - cmpbge zero, t2, t8 # .. e1 : bits set iff null found - or t0, t3, t0 # e0 : - beq a2, $a_eoc # .. e1 : - bne t8, $a_eos # .. e1 : - - /* On entry to this basic block: - t0 == a source word not containing a null. */ - -$a_loop: - stq_u t0, 0(a0) # e0 : - addq a0, 8, a0 # .. e1 : - EX( ldq_u t0, 0(a1) ) # e0 : - addq a1, 8, a1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t0, t8 # .. e1 (stall) - beq a2, $a_eoc # e1 : - beq t8, $a_loop # e1 : - - /* Take care of the final (partial) word store. At this point - the end-of-count bit is set in t8 iff it applies. - - On entry to this basic block we have: - t0 == the source word containing the null - t8 == the cmpbge mask that found it. */ - -$a_eos: - negq t8, t12 # e0 : find low bit set - and t8, t12, t12 # e1 (stall) - - /* For the sake of the cache, don't read a destination word - if we're not going to need it. */ - and t12, 0x80, t6 # e0 : - bne t6, 1f # .. e1 (zdb) - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t12, t6, t8 # e0 : - unop # - zapnot t0, t8, t0 # e0 : clear src bytes > null - zap t1, t8, t1 # .. e1 : clear dst bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) - br $finish_up - - /* Add the end-of-count bit to the eos detection bitmask. */ -$a_eoc: - or t10, t8, t8 - br $a_eos - - /*** The Function Entry Point ***/ - .align 3 -__strncpy_from_user: - mov a0, v0 # save the string start - beq a2, $zerolength - - /* Are source and destination co-aligned? */ - xor a0, a1, t1 # e0 : - and a0, 7, t0 # .. e1 : find dest misalignment - and t1, 7, t1 # e0 : - addq a2, t0, a2 # .. e1 : bias count by dest misalignment - subq a2, 1, a2 # e0 : - and a2, 7, t2 # e1 : - srl a2, 3, a2 # e0 : a2 = loop counter = (count - 1)/8 - addq zero, 1, t10 # .. e1 : - sll t10, t2, t10 # e0 : t10 = bitmask of last count byte - bne t1, $unaligned # .. e1 : - - /* We are co-aligned; take care of a partial first word. */ - - EX( ldq_u t1, 0(a1) ) # e0 : load first src word - addq a1, 8, a1 # .. e1 : - - beq t0, $aligned # avoid loading dest word if not needed - ldq_u t0, 0(a0) # e0 : - br $aligned # .. e1 : - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 3 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # e0 : load second src word - addq a1, 8, a1 # .. e1 : - mskql t0, a0, t0 # e0 : mask trailing garbage in dst - extqh t2, a1, t4 # e0 : - or t1, t4, t1 # e1 : first aligned src word complete - mskqh t1, a0, t1 # e0 : mask leading garbage in src - or t0, t1, t0 # e0 : first output word complete - or t0, t6, t6 # e1 : mask original data for zero test - cmpbge zero, t6, t8 # e0 : - beq a2, $u_eocfin # .. e1 : - bne t8, $u_final # e1 : - - lda t6, -1 # e1 : mask out the bits we have - mskql t6, a1, t6 # e0 : already seen - stq_u t0, 0(a0) # e0 : store first output word - or t6, t2, t2 # .. e1 : - cmpbge zero, t2, t8 # e0 : find nulls in second partial - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e0 : - bne t8, $u_late_head_exit # .. e1 : - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # e0 : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # .. e1 : read next high-order source word - addq a1, 8, a1 # e0 : - cmpbge zero, t2, t8 # e1 (stall) - beq a2, $u_eoc # e1 : - bne t8, $u_eos # e1 : - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - .align 3 -$u_loop: - extqh t2, a1, t0 # e0 : extract high bits for current word - addq a1, 8, a1 # .. e1 : - extql t2, a1, t3 # e0 : extract low bits for next time - addq a0, 8, a0 # .. e1 : - or t0, t1, t0 # e0 : current dst word now complete - EX( ldq_u t2, 0(a1) ) # .. e1 : load high word for next time - stq_u t0, -8(a0) # e0 : save the current word - mov t3, t1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t2, t8 # .. e1 : test new word for eos - beq a2, $u_eoc # e1 : - beq t8, $u_loop # e1 : - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ -$u_eos: - extqh t2, a1, t0 # e0 : - or t0, t1, t0 # e1 : first (partial) source word complete - - cmpbge zero, t0, t8 # e0 : is the null in this first bit? - bne t8, $u_final # .. e1 (zdb) - - stq_u t0, 0(a0) # e0 : the null was in the high-order bits - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e1 : - -$u_late_head_exit: - extql t2, a1, t0 # .. e0 : - cmpbge zero, t0, t8 # e0 : - or t8, t10, t6 # e1 : - cmoveq a2, t6, t8 # e0 : - nop # .. e1 : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ -$u_final: - negq t8, t6 # e0 : isolate low bit set - and t6, t8, t12 # e1 : - - and t12, 0x80, t6 # e0 : avoid dest word load if we can - bne t6, 1f # .. e1 (zdb) - - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t6, t12, t8 # e0 : - zapnot t0, t8, t0 # .. e1 : kill source bytes > null - zap t1, t8, t1 # e0 : kill dest bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) # e0 : - br $finish_up - -$u_eoc: # end-of-count - extqh t2, a1, t0 - or t0, t1, t0 - cmpbge zero, t0, t8 - -$u_eocfin: # end-of-count, final word - or t10, t8, t8 - br $u_final - - /* Unaligned copy entry point. */ - .align 3 -$unaligned: - - EX( ldq_u t1, 0(a1) ) # e0 : load first source word - - and a0, 7, t4 # .. e1 : find dest misalignment - and a1, 7, t5 # e0 : find src misalignment - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t0 # .. e1 : - mov zero, t6 # e0 : - beq t4, 1f # .. e1 : - ldq_u t0, 0(a0) # e0 : - lda t6, -1 # .. e1 : - mskql t6, a0, t6 # e0 : -1: - subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr - - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - - cmplt t4, t5, t12 # e1 : - extql t1, a1, t1 # .. e0 : shift src into place - lda t2, -1 # e0 : for creating masks later - beq t12, $u_head # e1 : - - mskqh t2, t5, t2 # e0 : begin src byte validity mask - cmpbge zero, t1, t8 # .. e1 : is there a zero? - extql t2, a1, t2 # e0 : - or t8, t10, t5 # .. e1 : test for end-of-count too - cmpbge zero, t2, t3 # e0 : - cmoveq a2, t5, t8 # .. e1 : - andnot t8, t3, t8 # e0 : - beq t8, $u_head # .. e1 (zdb) - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # e0 : - negq t8, t6 # .. e1 : build bitmask of bytes <= zero - mskqh t1, t4, t1 # e0 : - and t6, t8, t12 # .. e1 : - subq t12, 1, t6 # e0 : - or t6, t12, t8 # e1 : - - zapnot t2, t8, t2 # e0 : prepare source word; mirror changes - zapnot t1, t8, t1 # .. e1 : to source validity mask - - andnot t0, t2, t0 # e0 : zero place for source to reside - or t0, t1, t0 # e1 : and put it there - stq_u t0, 0(a0) # e0 : - -$finish_up: - zapnot t0, t12, t4 # was last byte written null? - cmovne t4, 1, t4 - - and t12, 0xf0, t3 # binary search for the address of the - and t12, 0xcc, t2 # last byte written - and t12, 0xaa, t1 - bic a0, 7, t0 - cmovne t3, 4, t3 - cmovne t2, 2, t2 - cmovne t1, 1, t1 - addq t0, t3, t0 - addq t1, t2, t1 - addq t0, t1, t0 - addq t0, t4, t0 # add one if we filled the buffer - - subq t0, v0, v0 # find string length - ret - -$zerolength: - clr v0 -$exception: - ret - - .end __strncpy_from_user diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 5eecab1..0c4132d 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -89,6 +89,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr, const struct exception_table_entry *fixup; int fault, si_code = SEGV_MAPERR; siginfo_t info; + unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (cause > 0 ? FAULT_FLAG_WRITE : 0)); /* As of EV6, a load into $31/$f31 is a prefetch, and never faults (or is suppressed by the PALcode). Support that for older CPUs @@ -114,6 +116,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto vmalloc_fault; #endif +retry: down_read(&mm->mmap_sem); vma = find_vma(mm, address); if (!vma) @@ -144,8 +147,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* If for any reason at all we couldn't handle the fault, make sure we exit gracefully rather than endlessly redo the fault. */ - fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0); - up_read(&mm->mmap_sem); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -153,10 +159,26 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; + + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) + current->maj_flt++; + else + current->min_flt++; + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } + } + + up_read(&mm->mmap_sem); + return; /* Something tried to access memory that isn't in our memory map. @@ -186,12 +208,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* We ran out of memory, or some other thing happened to us that made us unable to handle the page fault gracefully. */ out_of_memory: + up_read(&mm->mmap_sem); if (!user_mode(regs)) goto no_context; pagefault_out_of_memory(); return; do_sigbus: + up_read(&mm->mmap_sem); /* Send a sigbus, regardless of whether we were in kernel or user mode. */ info.si_signo = SIGBUS; diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c index a0a5d27..b8ce18f 100644 --- a/arch/alpha/oprofile/common.c +++ b/arch/alpha/oprofile/common.c @@ -12,6 +12,7 @@ #include <linux/smp.h> #include <linux/errno.h> #include <asm/ptrace.h> +#include <asm/special_insns.h> #include "op_impl.h" diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6d6e18f..c5f9ae5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2144,6 +2144,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c4..bd0cff3 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177..59d9789 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 52d9470..f8ca6fa 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -41,9 +41,13 @@ }; power-blue { label = "power:blue"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 10 0>; linux,default-trigger = "timer"; }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 0>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f351..d351b27 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661..da68454 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de5..6321567 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -102,7 +102,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca8030..4e574c2 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/mfc.h> +#include <plat/hdmi.h> #include <mach/ohci.h> #include <mach/map.h> @@ -734,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688..73f2bce 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include <plat/mfc.h> #include <plat/ehci.h> #include <plat/clock.h> +#include <plat/hdmi.h> #include <mach/map.h> #include <mach/ohci.h> @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c22..d004d37 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o @@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520..4233d9e 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S index 7e49deb..7e49deb 100644 --- a/arch/arm/mach-imx/head-v7.S +++ b/arch/arm/mach-imx/headsmp.S diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d5..f8f7437 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608..045b3f6 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a571755..a13299d 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64ad..3226077 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f95..7e8a5a2 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d7..a9bc841 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b8..3057f7d 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db02..fcd4e85 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,13 +62,14 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM - select ARCH_NEEDS_CPU_IDLE_COUPLED + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 7491529..2821448 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0..0d362e9 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -58,6 +58,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 1473474..c187586 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a..a0b4a428 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index ee05e19..288bee6 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -238,8 +238,9 @@ int __init omap4_idle_init(void) for_each_cpu(cpu_id, cpu_online_mask) { dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED dev->coupled_cpus = *cpu_online_mask; - +#endif cpuidle_register_driver(&omap4_idle_driver); if (cpuidle_register_device(dev)) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a7..76f9b3c 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba2..c95415d 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c..05bd8f0 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d..91e71d8 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f17..db5ff66 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b22..410291c 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b..ee99fd5 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf..53d3d46 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,7 +41,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 9960480..df15646 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8674a89..a534d88 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -797,6 +797,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -804,6 +805,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -815,6 +818,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8c..938b50a 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180e..bb5d08a 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320..324d31b 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a1..7f7b112 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index d245a87..b8b747a 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb2..ae2377e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f..db98e70 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce..fc49f3d 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> +#include <media/s5p_hdmi.h> + #include <asm/irq.h> #include <asm/pmu.h> #include <asm/mach/arch.h> @@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; @@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 0000000..331d046 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f..1507028 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 954d81e..7913695 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -234,5 +234,4 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_T10DIF=y -CONFIG_MISC_DEVICES=y CONFIG_INTEL_IOMMU=y diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 91c41ec..f8e9133 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -209,4 +209,3 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y CONFIG_CRYPTO_MD5=y -CONFIG_MISC_DEVICES=y diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 4a46990..b22df94 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -5,6 +5,7 @@ config M68K select HAVE_AOUT if MMU select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_ATOMIC64 select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select GENERIC_CPU_DEVICES select GENERIC_STRNCPY_FROM_USER if MMU diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 8206834..c4eb79e 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -28,6 +28,7 @@ config COLDFIRE select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 select GENERIC_CSUM + select HAVE_CLK endchoice @@ -58,7 +59,6 @@ config MCPU32 config M68020 bool "68020 support" depends on MMU - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68020 @@ -69,7 +69,6 @@ config M68020 config M68030 bool "68030 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68030 @@ -79,7 +78,6 @@ config M68030 config M68040 bool "68040 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68LC040 @@ -90,7 +88,6 @@ config M68040 config M68060 bool "68060 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68060 diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 331d574..faf6528 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -89,6 +89,7 @@ config ATH79 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT + select HAVE_CLK select IRQ_CPU select MIPS_MACHINE select SYS_HAS_CPU_MIPS32_R2 diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index 9996948..a124c25 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -228,6 +228,8 @@ static int mtx1_pci_idsel(unsigned int devsel, int assert) * adapter on the mtx-1 "singleboard" variant. It triggers a custom * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. */ + udelay(1); + if (assert && devsel != 0) /* Suppress signal to Cardbus */ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c index 36e9570..b2a2311 100644 --- a/arch/mips/ath79/dev-usb.c +++ b/arch/mips/ath79/dev-usb.c @@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void) ath79_ohci_resources[0].start = AR7240_OHCI_BASE; ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; + ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB; + ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB; platform_device_register(&ath79_ohci_device); } diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c index 29054f2..48fe762 100644 --- a/arch/mips/ath79/gpio.c +++ b/arch/mips/ath79/gpio.c @@ -188,8 +188,10 @@ void __init ath79_gpio_init(void) if (soc_is_ar71xx()) ath79_gpio_count = AR71XX_GPIO_COUNT; - else if (soc_is_ar724x()) - ath79_gpio_count = AR724X_GPIO_COUNT; + else if (soc_is_ar7240()) + ath79_gpio_count = AR7240_GPIO_COUNT; + else if (soc_is_ar7241() || soc_is_ar7242()) + ath79_gpio_count = AR7241_GPIO_COUNT; else if (soc_is_ar913x()) ath79_gpio_count = AR913X_GPIO_COUNT; else if (soc_is_ar933x()) diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c index e39f730..f1c9c3e 100644 --- a/arch/mips/bcm63xx/dev-spi.c +++ b/arch/mips/bcm63xx/dev-spi.c @@ -106,11 +106,15 @@ int __init bcm63xx_spi_register(void) if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH; } if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) { spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH; } bcm63xx_spi_regs_init(); diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 7fb1f22..274cd4f 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -61,6 +61,12 @@ static void octeon_irq_set_ciu_mapping(int irq, int line, int bit, octeon_irq_ciu_to_irq[line][bit] = irq; } +static void octeon_irq_force_ciu_mapping(struct irq_domain *domain, + int irq, int line, int bit) +{ + irq_domain_associate(domain, irq, line << 6 | bit); +} + static int octeon_coreid_for_cpu(int cpu) { #ifdef CONFIG_SMP @@ -183,19 +189,9 @@ static void __init octeon_irq_init_core(void) mutex_init(&cd->core_irq_mutex); irq = OCTEON_IRQ_SW0 + i; - switch (irq) { - case OCTEON_IRQ_TIMER: - case OCTEON_IRQ_SW0: - case OCTEON_IRQ_SW1: - case OCTEON_IRQ_5: - case OCTEON_IRQ_PERF: - irq_set_chip_data(irq, cd); - irq_set_chip_and_handler(irq, &octeon_irq_chip_core, - handle_percpu_irq); - break; - default: - break; - } + irq_set_chip_data(irq, cd); + irq_set_chip_and_handler(irq, &octeon_irq_chip_core, + handle_percpu_irq); } } @@ -890,7 +886,6 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, unsigned int type; unsigned int pin; unsigned int trigger; - struct octeon_irq_gpio_domain_data *gpiod; if (d->of_node != node) return -EINVAL; @@ -925,8 +920,7 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, break; } *out_type = type; - gpiod = d->host_data; - *out_hwirq = gpiod->base_hwirq + pin; + *out_hwirq = pin; return 0; } @@ -996,19 +990,21 @@ static int octeon_irq_ciu_map(struct irq_domain *d, static int octeon_irq_gpio_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw) { - unsigned int line = hw >> 6; - unsigned int bit = hw & 63; + struct octeon_irq_gpio_domain_data *gpiod = d->host_data; + unsigned int line, bit; if (!octeon_irq_virq_in_range(virq)) return -EINVAL; + hw += gpiod->base_hwirq; + line = hw >> 6; + bit = hw & 63; if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; octeon_irq_set_ciu_mapping(virq, line, bit, octeon_irq_gpio_chip, octeon_irq_handle_gpio); - return 0; } @@ -1149,6 +1145,7 @@ static void __init octeon_irq_init_ciu(void) struct irq_chip *chip_wd; struct device_node *gpio_node; struct device_node *ciu_node; + struct irq_domain *ciu_domain = NULL; octeon_irq_init_ciu_percpu(); octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu; @@ -1177,31 +1174,6 @@ static void __init octeon_irq_init_ciu(void) /* Mips internal */ octeon_irq_init_core(); - /* CIU_0 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); - - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_MSI0, 0, i + 40, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_RML, 0, 46, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq); - - /* CIU_1 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq); - gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio"); if (gpio_node) { struct octeon_irq_gpio_domain_data *gpiod; @@ -1219,10 +1191,35 @@ static void __init octeon_irq_init_ciu(void) ciu_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-ciu"); if (ciu_node) { - irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); + ciu_domain = irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); of_node_put(ciu_node); } else - pr_warn("Cannot find device node for cavium,octeon-3860-ciu.\n"); + panic("Cannot find device node for cavium,octeon-3860-ciu."); + + /* CIU_0 */ + for (i = 0; i < 16; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i + 0); + + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); + + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_INT0, 0, i + 36); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56); + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_BOOTDMA, 0, 63); + + /* CIU_1 */ + for (i = 0; i < 16; i++) + octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB1, 1, 17); /* Enable the CIU lines */ set_c0_status(STATUSF_IP3 | STATUSF_IP2); diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h index 1caa78a..dde5044 100644 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h @@ -393,7 +393,8 @@ #define AR71XX_GPIO_REG_FUNC 0x28 #define AR71XX_GPIO_COUNT 16 -#define AR724X_GPIO_COUNT 18 +#define AR7240_GPIO_COUNT 18 +#define AR7241_GPIO_COUNT 20 #define AR913X_GPIO_COUNT 22 #define AR933X_GPIO_COUNT 30 #define AR934X_GPIO_COUNT 23 diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h index 4476fa0..6ddae92 100644 --- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h @@ -42,7 +42,6 @@ #define cpu_has_mips64r1 0 #define cpu_has_mips64r2 0 -#define cpu_has_dsp 0 #define cpu_has_mipsmt 0 #define cpu_has_64bits 0 diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h index 7d98dbe..c9bae13 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h @@ -9,6 +9,8 @@ int __init bcm63xx_spi_register(void); struct bcm63xx_spi_pdata { unsigned int fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; int bus_num; int num_chipselect; u32 speed_hz; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 4ccc2a7..61f2a2a 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -1054,7 +1054,8 @@ #define SPI_6338_FILL_BYTE 0x07 #define SPI_6338_MSG_TAIL 0x09 #define SPI_6338_RX_TAIL 0x0b -#define SPI_6338_MSG_CTL 0x40 +#define SPI_6338_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6338_MSG_CTL_WIDTH 8 #define SPI_6338_MSG_DATA 0x41 #define SPI_6338_MSG_DATA_SIZE 0x3f #define SPI_6338_RX_DATA 0x80 @@ -1070,7 +1071,8 @@ #define SPI_6348_FILL_BYTE 0x07 #define SPI_6348_MSG_TAIL 0x09 #define SPI_6348_RX_TAIL 0x0b -#define SPI_6348_MSG_CTL 0x40 +#define SPI_6348_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6348_MSG_CTL_WIDTH 8 #define SPI_6348_MSG_DATA 0x41 #define SPI_6348_MSG_DATA_SIZE 0x3f #define SPI_6348_RX_DATA 0x80 @@ -1078,6 +1080,7 @@ /* BCM 6358 SPI core */ #define SPI_6358_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6358_MSG_CTL_WIDTH 16 #define SPI_6358_MSG_DATA 0x02 #define SPI_6358_MSG_DATA_SIZE 0x21e #define SPI_6358_RX_DATA 0x400 @@ -1094,6 +1097,7 @@ /* BCM 6358 SPI core */ #define SPI_6368_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6368_MSG_CTL_WIDTH 16 #define SPI_6368_MSG_DATA 0x02 #define SPI_6368_MSG_DATA_SIZE 0x21e #define SPI_6368_RX_DATA 0x400 @@ -1115,7 +1119,10 @@ #define SPI_HD_W 0x01 #define SPI_HD_R 0x02 #define SPI_BYTE_CNT_SHIFT 0 -#define SPI_MSG_TYPE_SHIFT 14 +#define SPI_6338_MSG_TYPE_SHIFT 6 +#define SPI_6348_MSG_TYPE_SHIFT 6 +#define SPI_6358_MSG_TYPE_SHIFT 14 +#define SPI_6368_MSG_TYPE_SHIFT 14 /* Command */ #define SPI_CMD_NOOP 0x00 diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h index 4189920..c22a307 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/irq.h +++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h @@ -21,14 +21,10 @@ enum octeon_irq { OCTEON_IRQ_TIMER, /* sources in CIU_INTX_EN0 */ OCTEON_IRQ_WORKQ0, - OCTEON_IRQ_GPIO0 = OCTEON_IRQ_WORKQ0 + 16, - OCTEON_IRQ_WDOG0 = OCTEON_IRQ_GPIO0 + 16, + OCTEON_IRQ_WDOG0 = OCTEON_IRQ_WORKQ0 + 16, OCTEON_IRQ_WDOG15 = OCTEON_IRQ_WDOG0 + 15, OCTEON_IRQ_MBOX0 = OCTEON_IRQ_WDOG0 + 16, OCTEON_IRQ_MBOX1, - OCTEON_IRQ_UART0, - OCTEON_IRQ_UART1, - OCTEON_IRQ_UART2, OCTEON_IRQ_PCI_INT0, OCTEON_IRQ_PCI_INT1, OCTEON_IRQ_PCI_INT2, @@ -38,8 +34,6 @@ enum octeon_irq { OCTEON_IRQ_PCI_MSI2, OCTEON_IRQ_PCI_MSI3, - OCTEON_IRQ_TWSI, - OCTEON_IRQ_TWSI2, OCTEON_IRQ_RML, OCTEON_IRQ_TIMER0, OCTEON_IRQ_TIMER1, @@ -47,8 +41,6 @@ enum octeon_irq { OCTEON_IRQ_TIMER3, OCTEON_IRQ_USB0, OCTEON_IRQ_USB1, - OCTEON_IRQ_MII0, - OCTEON_IRQ_MII1, OCTEON_IRQ_BOOTDMA, #ifndef CONFIG_PCI_MSI OCTEON_IRQ_LAST = 127 diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index 7531ecd..dca8bce 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -10,6 +10,7 @@ struct mod_arch_specific { struct list_head dbe_list; const struct exception_table_entry *dbe_start; const struct exception_table_entry *dbe_end; + struct mips_hi16 *r_mips_hi16_list; }; typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h index a37d12b..afe9e0e 100644 --- a/arch/mips/include/asm/r4k-timer.h +++ b/arch/mips/include/asm/r4k-timer.h @@ -12,16 +12,16 @@ #ifdef CONFIG_SYNC_R4K -extern void synchronise_count_master(void); -extern void synchronise_count_slave(void); +extern void synchronise_count_master(int cpu); +extern void synchronise_count_slave(int cpu); #else -static inline void synchronise_count_master(void) +static inline void synchronise_count_master(int cpu) { } -static inline void synchronise_count_slave(void) +static inline void synchronise_count_slave(int cpu) { } diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index a5066b1..4f8c3cb 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -39,8 +39,6 @@ struct mips_hi16 { Elf_Addr value; }; -static struct mips_hi16 *mips_hi16_list; - static LIST_HEAD(dbe_list); static DEFINE_SPINLOCK(dbe_lock); @@ -128,8 +126,8 @@ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v) n->addr = (Elf_Addr *)location; n->value = v; - n->next = mips_hi16_list; - mips_hi16_list = n; + n->next = me->arch.r_mips_hi16_list; + me->arch.r_mips_hi16_list = n; return 0; } @@ -142,18 +140,28 @@ static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v) return 0; } +static void free_relocation_chain(struct mips_hi16 *l) +{ + struct mips_hi16 *next; + + while (l) { + next = l->next; + kfree(l); + l = next; + } +} + static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) { unsigned long insnlo = *location; + struct mips_hi16 *l; Elf_Addr val, vallo; /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; - if (mips_hi16_list != NULL) { - struct mips_hi16 *l; - - l = mips_hi16_list; + if (me->arch.r_mips_hi16_list != NULL) { + l = me->arch.r_mips_hi16_list; while (l != NULL) { struct mips_hi16 *next; unsigned long insn; @@ -188,7 +196,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) l = next; } - mips_hi16_list = NULL; + me->arch.r_mips_hi16_list = NULL; } /* @@ -201,6 +209,9 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) return 0; out_danger: + free_relocation_chain(l); + me->arch.r_mips_hi16_list = NULL; + pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name); return -ENOEXEC; @@ -273,6 +284,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); + me->arch.r_mips_hi16_list = NULL; for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { /* This is where to make the change */ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr @@ -296,6 +308,19 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, return res; } + /* + * Normally the hi16 list should be deallocated at this point. A + * malformed binary however could contain a series of R_MIPS_HI16 + * relocations not followed by a R_MIPS_LO16 relocation. In that + * case, free up the list and return an error. + */ + if (me->arch.r_mips_hi16_list) { + free_relocation_chain(me->arch.r_mips_hi16_list); + me->arch.r_mips_hi16_list = NULL; + + return -ENOEXEC; + } + return 0; } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 31637d8..9005bf9 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -130,7 +130,7 @@ asmlinkage __cpuinit void start_secondary(void) cpu_set(cpu, cpu_callin_map); - synchronise_count_slave(); + synchronise_count_slave(cpu); /* * irq will be enabled in ->smp_finish(), enabling it too early @@ -173,7 +173,6 @@ void smp_send_stop(void) void __init smp_cpus_done(unsigned int max_cpus) { mp_ops->cpus_done(); - synchronise_count_master(); } /* called from main before smp_init() */ @@ -206,6 +205,7 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle) while (!cpu_isset(cpu, cpu_callin_map)) udelay(100); + synchronise_count_master(cpu); return 0; } diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 842d55e..7f1eca3 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -28,12 +28,11 @@ static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0); #define COUNTON 100 #define NR_LOOPS 5 -void __cpuinit synchronise_count_master(void) +void __cpuinit synchronise_count_master(int cpu) { int i; unsigned long flags; unsigned int initcount; - int nslaves; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -43,8 +42,7 @@ void __cpuinit synchronise_count_master(void) return; #endif - printk(KERN_INFO "Synchronize counters across %u CPUs: ", - num_online_cpus()); + printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu); local_irq_save(flags); @@ -52,7 +50,7 @@ void __cpuinit synchronise_count_master(void) * Notify the slaves that it's time to start */ atomic_set(&count_reference, read_c0_count()); - atomic_set(&count_start_flag, 1); + atomic_set(&count_start_flag, cpu); smp_wmb(); /* Count will be initialised to current timer for all CPU's */ @@ -69,10 +67,9 @@ void __cpuinit synchronise_count_master(void) * two CPUs. */ - nslaves = num_online_cpus()-1; for (i = 0; i < NR_LOOPS; i++) { - /* slaves loop on '!= ncpus' */ - while (atomic_read(&count_count_start) != nslaves) + /* slaves loop on '!= 2' */ + while (atomic_read(&count_count_start) != 1) mb(); atomic_set(&count_count_stop, 0); smp_wmb(); @@ -89,7 +86,7 @@ void __cpuinit synchronise_count_master(void) /* * Wait for all slaves to leave the synchronization point: */ - while (atomic_read(&count_count_stop) != nslaves) + while (atomic_read(&count_count_stop) != 1) mb(); atomic_set(&count_count_start, 0); smp_wmb(); @@ -97,6 +94,7 @@ void __cpuinit synchronise_count_master(void) } /* Arrange for an interrupt in a short while */ write_c0_compare(read_c0_count() + COUNTON); + atomic_set(&count_start_flag, 0); local_irq_restore(flags); @@ -108,11 +106,10 @@ void __cpuinit synchronise_count_master(void) printk("done.\n"); } -void __cpuinit synchronise_count_slave(void) +void __cpuinit synchronise_count_slave(int cpu) { int i; unsigned int initcount; - int ncpus; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -127,16 +124,15 @@ void __cpuinit synchronise_count_slave(void) * so we first wait for the master to say everyone is ready */ - while (!atomic_read(&count_start_flag)) + while (atomic_read(&count_start_flag) != cpu) mb(); /* Count will be initialised to next expire for all CPU's */ initcount = atomic_read(&count_reference); - ncpus = num_online_cpus(); for (i = 0; i < NR_LOOPS; i++) { atomic_inc(&count_count_start); - while (atomic_read(&count_count_start) != ncpus) + while (atomic_read(&count_count_start) != 2) mb(); /* @@ -146,7 +142,7 @@ void __cpuinit synchronise_count_slave(void) write_c0_count(initcount); atomic_inc(&count_count_stop); - while (atomic_read(&count_count_stop) != ncpus) + while (atomic_read(&count_count_stop) != 2) mb(); } /* Arrange for an interrupt in a short while */ diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index 284dea5..2147cb3 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -252,16 +252,3 @@ void __init mips_pcibios_init(void) register_pci_controller(controller); } - -/* Enable PCI 2.1 compatibility in PIIX4 */ -static void __devinit quirk_dlcsetup(struct pci_dev *dev) -{ - u8 odlc, ndlc; - (void) pci_read_config_byte(dev, 0x82, &odlc); - /* Enable passive releases and delayed transaction */ - ndlc = odlc | 7; - (void) pci_write_config_byte(dev, 0x82, ndlc); -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, - quirk_dlcsetup); diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index 414a745..86d77a6 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -23,9 +23,12 @@ #define AR724X_PCI_MEM_BASE 0x10000000 #define AR724X_PCI_MEM_SIZE 0x08000000 +#define AR724X_PCI_REG_RESET 0x18 #define AR724X_PCI_REG_INT_STATUS 0x4c #define AR724X_PCI_REG_INT_MASK 0x50 +#define AR724X_PCI_RESET_LINK_UP BIT(0) + #define AR724X_PCI_INT_DEV0 BIT(14) #define AR724X_PCI_IRQ_COUNT 1 @@ -38,6 +41,15 @@ static void __iomem *ar724x_pci_ctrl_base; static u32 ar724x_pci_bar0_value; static bool ar724x_pci_bar0_is_cached; +static bool ar724x_pci_link_up; + +static inline bool ar724x_pci_check_link(void) +{ + u32 reset; + + reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET); + return reset & AR724X_PCI_RESET_LINK_UP; +} static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, uint32_t *value) @@ -46,6 +58,9 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base; u32 data; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -96,6 +111,9 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, u32 data; int s; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -280,6 +298,10 @@ int __init ar724x_pcibios_init(int irq) if (ar724x_pci_ctrl_base == NULL) goto err_unmap_devcfg; + ar724x_pci_link_up = ar724x_pci_check_link(); + if (!ar724x_pci_link_up) + pr_warn("ar724x: PCIe link is down\n"); + ar724x_pci_irq_init(irq); register_pci_controller(&ar724x_pci_controller); diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index 6c6defc..af9cf30 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -141,7 +141,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0) -#define ATOMIC_INIT(i) ((atomic_t) { (i) }) +#define ATOMIC_INIT(i) { (i) } #define smp_mb__before_atomic_dec() smp_mb() #define smp_mb__after_atomic_dec() smp_mb() @@ -150,7 +150,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #ifdef CONFIG_64BIT -#define ATOMIC64_INIT(i) ((atomic64_t) { (i) }) +#define ATOMIC64_INIT(i) { (i) } static __inline__ s64 __atomic64_add_return(s64 i, atomic64_t *v) diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index d4b94b3..2c05a929 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -309,7 +309,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp, cregs->ksp = (unsigned long)stack + (pregs->gr[21] & (THREAD_SIZE - 1)); cregs->gr[30] = usp; - if (p->personality == PER_HPUX) { + if (personality(p->personality) == PER_HPUX) { #ifdef CONFIG_HPUX cregs->kpc = (unsigned long) &hpux_child_return; #else diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index c9b9322..7426e40 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -225,12 +225,12 @@ long parisc_personality(unsigned long personality) long err; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; err = sys_personality(personality); - if (err == PER_LINUX32) - err = PER_LINUX; + if (personality(err) == PER_LINUX32) + err = (err & ~PER_MASK) | PER_LINUX; return err; } diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 8d35d2c..4f9c9f6 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -345,6 +345,13 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + }; /include/ "qoriq-sec4.0-0.dtsi" }; diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index f4337ba..26e541c 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -6,28 +6,27 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_EMBEDDED=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P1023_RDS=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_CPM2=y -CONFIG_GPIO_MPC8XXX=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y @@ -63,11 +62,11 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -80,15 +79,14 @@ CONFIG_SATA_FSL=y CONFIG_SATA_SIL24=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_FS_ENET=y +CONFIG_FSL_PQ_MDIO=y +CONFIG_E1000E=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_FS_ENET=y -CONFIG_E1000E=y -CONFIG_FSL_PQ_MDIO=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -98,16 +96,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_QE=m -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_SOUND=y @@ -123,7 +120,6 @@ CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set @@ -150,22 +146,15 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_FRAME_WARN=8092 CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index cbb98c1..8b3d57c 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -6,8 +6,8 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y -CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -21,23 +21,22 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P2041_RDB=y CONFIG_P3041_DS=y CONFIG_P4080_DS=y CONFIG_P5020_DS=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_KEXEC=y CONFIG_IRQ_ALL_CPUS=y CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FSL_LBC=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y # CONFIG_PCIEASPM is not set +CONFIG_PCI_MSI=y CONFIG_RAPIDIO=y CONFIG_FSL_RIO=y CONFIG_NET=y @@ -70,6 +69,7 @@ CONFIG_INET_IPCOMP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y @@ -77,17 +77,14 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND_FSL_IFC=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -115,11 +112,9 @@ CONFIG_SERIO_LIBPS2=y CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -132,7 +127,6 @@ CONFIG_SPI_FSL_ESPI=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB_HID=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -142,8 +136,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_OF=y -CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y @@ -170,19 +162,16 @@ CONFIG_HUGETLBFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_RCU_TRACE=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD4=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index dd89de8..0516e22 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -56,6 +56,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 1513006..07b7f2a 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,8 +1,10 @@ +CONFIG_PPC64=y +CONFIG_ALTIVEC=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y @@ -13,15 +15,16 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_KEXEC=y -# CONFIG_RELOCATABLE is not set +# CONFIG_PPC_PSERIES is not set CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_PMAC64=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_MIGRATION is not set CONFIG_PCI_MSI=y CONFIG_NET=y CONFIG_PACKET=y @@ -49,6 +52,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y @@ -56,6 +60,8 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_CDROM_PKTCDVD=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -79,24 +85,33 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m -CONFIG_MACINTOSH_DRIVERS=y +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +CONFIG_IEEE1394_SBP2=m +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y +CONFIG_WINDFARM_PM121=y CONFIG_NETDEVICES=y -CONFIG_BONDING=m CONFIG_DUMMY=m -CONFIG_MII=y +CONFIG_BONDING=m CONFIG_TUN=m +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SUNGEM=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_TIGON3=y CONFIG_E1000=y -CONFIG_SUNGEM=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m +CONFIG_TIGON3=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -106,24 +121,36 @@ CONFIG_USB_USBNET=m # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_PPP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_RAW_DRIVER=y CONFIG_I2C_CHARDEV=y # CONFIG_HWMON is not set -CONFIG_AGP=y -CONFIG_DRM=y -CONFIG_DRM_NOUVEAU=y +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_TILEBLITTING=y +CONFIG_FB_OF=y +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y CONFIG_FB_RADEON=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m @@ -131,7 +158,15 @@ CONFIG_SND_SEQUENCER=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_POWERMAC=m +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m CONFIG_SND_USB_AUDIO=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y CONFIG_HID_GYRATION=y CONFIG_LOGITECH_FF=y CONFIG_HID_PANTHERLORD=y @@ -139,12 +174,13 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y CONFIG_USB=y +CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y @@ -208,6 +244,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y +CONFIG_INOTIFY=y +CONFIG_AUTOFS_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y @@ -221,12 +259,14 @@ CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_1250=y CONFIG_NLS_CODEPAGE_1251=y @@ -234,23 +274,29 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y +CONFIG_CRC_T10DIF=y +CONFIG_LIBCRC32C=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_STRICT_DEVMEM=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_BOOTX_TEXT=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m @@ -260,6 +306,3 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_VIRTUALIZATION is not set -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=m diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 5aac9a8..9352e44 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -2,12 +2,12 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_PPC_CHRP is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_83xx=y @@ -25,7 +25,6 @@ CONFIG_ASP834x=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_MATH_EMULATION=y -CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_NET=y CONFIG_PACKET=y @@ -42,10 +41,9 @@ CONFIG_INET_ESP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -64,15 +62,14 @@ CONFIG_ATA=y CONFIG_SATA_FSL=y CONFIG_SATA_SIL=y CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_VITESSE_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_GIANFAR=y -CONFIG_UCC_GETH=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -112,17 +109,12 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_CRC_T10DIF=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 03ee911c..8b5bda2 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -5,7 +5,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -17,6 +19,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -40,8 +44,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_FORCE_MAX_ZONEORDER=12 @@ -74,36 +76,25 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -115,6 +106,7 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_FSL=y CONFIG_PATA_ALI=y +CONFIG_PATA_VIA=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_FS_ENET=y @@ -134,7 +126,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -183,7 +174,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -229,18 +219,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index fdfa84d..b0974e7 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -7,7 +7,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -19,6 +21,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -42,8 +46,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IRQ_ALL_CPUS=y @@ -77,36 +79,25 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -137,7 +128,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -186,7 +176,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -232,18 +221,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 50d82c8..b3c083d 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -553,9 +553,7 @@ static inline int cpu_has_feature(unsigned long feature) & feature); } -#ifdef CONFIG_HAVE_HW_BREAKPOINT #define HBP_NUM 1 -#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif /* !__ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 50ea12f..a8bf5c6 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -33,6 +33,7 @@ #include <asm/kvm_asm.h> #include <asm/processor.h> #include <asm/page.h> +#include <asm/cacheflush.h> #define KVM_MAX_VCPUS NR_CPUS #define KVM_MAX_VCORES NR_CPUS diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 0124937..e006f0b 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -219,4 +219,16 @@ void kvmppc_claim_lpid(long lpid); void kvmppc_free_lpid(long lpid); void kvmppc_init_lpid(unsigned long nr_lpids); +static inline void kvmppc_mmu_flush_icache(pfn_t pfn) +{ + /* Clear i-cache for new pages */ + struct page *page; + page = pfn_to_page(pfn); + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } +} + + #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 326d33c..d4f471f 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -14,6 +14,7 @@ #include <linux/types.h> #include <linux/spinlock.h> #include <asm/smp.h> +#include <asm/io.h> struct mpic_msgr { u32 __iomem *base; diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2d7bb8c..e489752 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -83,11 +83,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 0; } - if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) { - dev_info(dev, "Warning: IOMMU window too big for device mask\n"); - dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n", - mask, (tbl->it_offset + tbl->it_size) << - IOMMU_PAGE_SHIFT); + if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) { + dev_info(dev, "Warning: IOMMU offset too big for device mask\n"); + dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n", + mask, tbl->it_offset << IOMMU_PAGE_SHIFT); return 0; } else return 1; diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index f3a82dd..956a4c4 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -253,7 +253,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { - bp->ctx->task->thread.last_hit_ubp = bp; + current->thread.last_hit_ubp = bp; regs->msr |= MSR_SE; goto out; } diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 782bd0a..c470a40 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -25,6 +25,7 @@ #include <asm/processor.h> #include <asm/machdep.h> #include <asm/debug.h> +#include <linux/slab.h> /* * This table contains the mapping between PowerPC hardware trap types, and @@ -101,6 +102,21 @@ static int computeSignal(unsigned int tt) return SIGHUP; /* default for things we don't know about */ } +/** + * + * kgdb_skipexception - Bail out of KGDB when we've been triggered. + * @exception: Exception vector number + * @regs: Current &struct pt_regs. + * + * On some architectures we need to skip a breakpoint exception when + * it occurs after a breakpoint has been removed. + * + */ +int kgdb_skipexception(int exception, struct pt_regs *regs) +{ + return kgdb_isremovedbreak(regs->nip); +} + static int kgdb_call_nmi_hook(struct pt_regs *regs) { kgdb_nmicallback(raw_smp_processor_id(), regs); @@ -138,6 +154,8 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) static int kgdb_singlestep(struct pt_regs *regs) { struct thread_info *thread_info, *exception_thread_info; + struct thread_info *backup_current_thread_info = \ + (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); if (user_mode(regs)) return 0; @@ -155,13 +173,17 @@ static int kgdb_singlestep(struct pt_regs *regs) thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1)); exception_thread_info = current_thread_info(); - if (thread_info != exception_thread_info) + if (thread_info != exception_thread_info) { + /* Save the original current_thread_info. */ + memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info); memcpy(exception_thread_info, thread_info, sizeof *thread_info); + } kgdb_handle_exception(0, SIGTRAP, 0, regs); if (thread_info != exception_thread_info) - memcpy(thread_info, exception_thread_info, sizeof *thread_info); + /* Restore current_thread_info lastly. */ + memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info); return 1; } @@ -410,7 +432,6 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, #else linux_regs->msr |= MSR_SE; #endif - kgdb_single_step = 1; atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id()); } diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index f2496f2..4e3cc47 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -107,11 +107,11 @@ long ppc64_personality(unsigned long personality) long ret; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret = (ret & ~PER_MASK) | PER_LINUX; return ret; } #endif diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c index f922c29..837f13e 100644 --- a/arch/powerpc/kvm/book3s_32_mmu_host.c +++ b/arch/powerpc/kvm/book3s_32_mmu_host.c @@ -211,6 +211,9 @@ next_pteg: pteg1 |= PP_RWRX; } + if (orig_pte->may_execute) + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); + local_irq_disable(); if (pteg[rr]) { diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index 10fc8ec..0688b6b 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -126,6 +126,8 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte) if (!orig_pte->may_execute) rflags |= HPTE_R_N; + else + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M); diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 5a84c8d..44b72fe 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1421,13 +1421,13 @@ _GLOBAL(kvmppc_h_cede) sync /* order setting ceded vs. testing prodded */ lbz r5,VCPU_PRODDED(r3) cmpwi r5,0 - bne 1f + bne kvm_cede_prodded li r0,0 /* set trap to 0 to say hcall is handled */ stw r0,VCPU_TRAP(r3) li r0,H_SUCCESS std r0,VCPU_GPR(R3)(r3) BEGIN_FTR_SECTION - b 2f /* just send it up to host on 970 */ + b kvm_cede_exit /* just send it up to host on 970 */ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) /* @@ -1446,7 +1446,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) or r4,r4,r0 PPC_POPCNTW(R7,R4) cmpw r7,r8 - bge 2f + bge kvm_cede_exit stwcx. r4,0,r6 bne 31b li r0,1 @@ -1555,7 +1555,8 @@ kvm_end_cede: b hcall_real_fallback /* cede when already previously prodded case */ -1: li r0,0 +kvm_cede_prodded: + li r0,0 stb r0,VCPU_PRODDED(r3) sync /* order testing prodded vs. clearing ceded */ stb r0,VCPU_CEDED(r3) @@ -1563,7 +1564,8 @@ kvm_end_cede: blr /* we've ceded but we want to give control to the host */ -2: li r3,H_TOO_HARD +kvm_cede_exit: + li r3,H_TOO_HARD blr secondary_too_late: diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index c510fc9..a2b6671 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -322,11 +322,11 @@ static inline void kvmppc_e500_ref_release(struct tlbe_ref *ref) static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500) { if (vcpu_e500->g2h_tlb1_map) - memset(vcpu_e500->g2h_tlb1_map, - sizeof(u64) * vcpu_e500->gtlb_params[1].entries, 0); + memset(vcpu_e500->g2h_tlb1_map, 0, + sizeof(u64) * vcpu_e500->gtlb_params[1].entries); if (vcpu_e500->h2g_tlb1_rmap) - memset(vcpu_e500->h2g_tlb1_rmap, - sizeof(unsigned int) * host_tlb_params[1].entries, 0); + memset(vcpu_e500->h2g_tlb1_rmap, 0, + sizeof(unsigned int) * host_tlb_params[1].entries); } static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500) @@ -539,6 +539,9 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize, ref, gvaddr, stlbe); + + /* Clear i-cache for new pages */ + kvmppc_mmu_flush_icache(pfn); } /* XXX only map the one-one case, for now use TLB0 */ diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index f9ede7c..0d24ff1 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -288,7 +288,7 @@ err1; stb r0,0(r3) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_usercopy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -326,38 +326,7 @@ err1; stb r0,0(r3) dcbt r0,r8,0b01010 /* GO */ .machine pop - /* - * We prefetch both the source and destination using enhanced touch - * instructions. We use a stream ID of 0 for the load side and - * 1 for the store side. - */ - clrrdi r6,r4,7 - clrrdi r9,r3,7 - ori r9,r9,1 /* stream=1 */ - - srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */ - cmpldi cr1,r7,0x3FF - ble cr1,1f - li r7,0x3FF -1: lis r0,0x0E00 /* depth=7 */ - sldi r7,r7,7 - or r7,r7,r0 - ori r10,r7,1 /* stream=1 */ - - lis r8,0x8000 /* GO=1 */ - clrldi r8,r8,32 - -.machine push -.machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 - eieio - dcbt r0,r8,0b01010 /* GO */ -.machine pop - - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S index 0efdc51..7ba6c96 100644 --- a/arch/powerpc/lib/memcpy_power7.S +++ b/arch/powerpc/lib/memcpy_power7.S @@ -222,7 +222,7 @@ _GLOBAL(memcpy_power7) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_copy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -260,7 +260,7 @@ _GLOBAL(memcpy_power7) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index baaafde..fbdad0e 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -469,6 +469,7 @@ void flush_dcache_icache_page(struct page *page) __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); #endif } +EXPORT_SYMBOL(flush_dcache_icache_page); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 77b49dd..7cd2dbd 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1431,7 +1431,7 @@ static void perf_event_interrupt(struct pt_regs *regs) if (!event->hw.idx || is_limited_pmc(event->hw.idx)) continue; val = read_pmc(event->hw.idx); - if ((int)val < 0) { + if (pmc_overflow(val)) { /* event has overflowed */ found = 1; record_and_restart(event, val, regs); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a7b2a60..c37f461 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -465,7 +465,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) iounmap(hose->cfg_data); iounmap(hose->cfg_addr); pcibios_free_controller(hose); - return 0; + return -ENODEV; } setup_pci_cmd(hose); @@ -827,6 +827,7 @@ struct device_node *fsl_pci_primary; void __devinit fsl_pci_init(void) { + int ret; struct device_node *node; struct pci_controller *hose; dma_addr_t max = 0xffffffff; @@ -855,10 +856,12 @@ void __devinit fsl_pci_init(void) if (!fsl_pci_primary) fsl_pci_primary = node; - fsl_add_bridge(node, fsl_pci_primary == node); - hose = pci_find_hose_for_OF_device(node); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + ret = fsl_add_bridge(node, fsl_pci_primary == node); + if (ret == 0) { + hose = pci_find_hose_for_OF_device(node); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } } } diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 483d8fa..e961f8c 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -14,6 +14,9 @@ #include <linux/list.h> #include <linux/of_platform.h> #include <linux/errno.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/slab.h> #include <asm/prom.h> #include <asm/hw_irq.h> #include <asm/ppc-pci.h> diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index eab3492..9b49c65e 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -17,6 +17,7 @@ #include <linux/reboot.h> #include <linux/delay.h> #include <linux/kallsyms.h> +#include <linux/kmsg_dump.h> #include <linux/cpumask.h> #include <linux/export.h> #include <linux/sysrq.h> @@ -894,13 +895,13 @@ cmds(struct pt_regs *excp) #endif default: printf("Unrecognized command: "); - do { + do { if (' ' < cmd && cmd <= '~') putchar(cmd); else printf("\\x%x", cmd); cmd = inchar(); - } while (cmd != '\n'); + } while (cmd != '\n'); printf(" (type ? for help)\n"); break; } @@ -1097,7 +1098,7 @@ static long check_bp_loc(unsigned long addr) return 1; } -static char *breakpoint_help_string = +static char *breakpoint_help_string = "Breakpoint command usage:\n" "b show breakpoints\n" "b <addr> [cnt] set breakpoint at given instr addr\n" @@ -1193,7 +1194,7 @@ bpt_cmds(void) default: termch = cmd; - cmd = skipbl(); + cmd = skipbl(); if (cmd == '?') { printf(breakpoint_help_string); break; @@ -1359,7 +1360,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr, sp + REGS_OFFSET); break; } - printf("--- Exception: %lx %s at ", regs.trap, + printf("--- Exception: %lx %s at ", regs.trap, getvecname(TRAP(®s))); pc = regs.nip; lr = regs.link; @@ -1623,14 +1624,14 @@ static void super_regs(void) cmd = skipbl(); if (cmd == '\n') { - unsigned long sp, toc; + unsigned long sp, toc; asm("mr %0,1" : "=r" (sp) :); asm("mr %0,2" : "=r" (toc) :); printf("msr = "REG" sprg0= "REG"\n", mfmsr(), mfspr(SPRN_SPRG0)); printf("pvr = "REG" sprg1= "REG"\n", - mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); + mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); printf("dec = "REG" sprg2= "REG"\n", mfspr(SPRN_DEC), mfspr(SPRN_SPRG2)); printf("sp = "REG" sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3)); @@ -1783,7 +1784,7 @@ byterev(unsigned char *val, int size) static int brev; static int mnoread; -static char *memex_help_string = +static char *memex_help_string = "Memory examine command usage:\n" "m [addr] [flags] examine/change memory\n" " addr is optional. will start where left off.\n" @@ -1798,7 +1799,7 @@ static char *memex_help_string = "NOTE: flags are saved as defaults\n" ""; -static char *memex_subcmd_help_string = +static char *memex_subcmd_help_string = "Memory examine subcommands:\n" " hexval write this val to current location\n" " 'string' write chars from string to this location\n" @@ -2064,7 +2065,7 @@ prdump(unsigned long adrs, long ndump) nr = mread(adrs, temp, r); adrs += nr; for (m = 0; m < r; ++m) { - if ((m & (sizeof(long) - 1)) == 0 && m > 0) + if ((m & (sizeof(long) - 1)) == 0 && m > 0) putchar(' '); if (m < nr) printf("%.2x", temp[m]); @@ -2072,7 +2073,7 @@ prdump(unsigned long adrs, long ndump) printf("%s", fault_chars[fault_type]); } for (; m < 16; ++m) { - if ((m & (sizeof(long) - 1)) == 0) + if ((m & (sizeof(long) - 1)) == 0) putchar(' '); printf(" "); } @@ -2148,45 +2149,28 @@ print_address(unsigned long addr) void dump_log_buf(void) { - const unsigned long size = 128; - unsigned long end, addr; - unsigned char buf[size + 1]; - - addr = 0; - buf[size] = '\0'; - - if (setjmp(bus_error_jmp) != 0) { - printf("Unable to lookup symbol __log_buf!\n"); - return; - } - - catch_memory_errors = 1; - sync(); - addr = kallsyms_lookup_name("__log_buf"); - - if (! addr) - printf("Symbol __log_buf not found!\n"); - else { - end = addr + (1 << CONFIG_LOG_BUF_SHIFT); - while (addr < end) { - if (! mread(addr, buf, size)) { - printf("Can't read memory at address 0x%lx\n", addr); - break; - } - - printf("%s", buf); - - if (strlen(buf) < size) - break; - - addr += size; - } - } - - sync(); - /* wait a little while to see if we get a machine check */ - __delay(200); - catch_memory_errors = 0; + struct kmsg_dumper dumper = { .active = 1 }; + unsigned char buf[128]; + size_t len; + + if (setjmp(bus_error_jmp) != 0) { + printf("Error dumping printk buffer!\n"); + return; + } + + catch_memory_errors = 1; + sync(); + + kmsg_dump_rewind_nolock(&dumper); + while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { + buf[len] = '\0'; + printf("%s", buf); + } + + sync(); + /* wait a little while to see if we get a machine check */ + __delay(200); + catch_memory_errors = 0; } /* diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index 32e8449..9b94a16 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -180,7 +180,8 @@ extern char elf_platform[]; #define ELF_PLATFORM (elf_platform) #ifndef CONFIG_64BIT -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) +#define SET_PERSONALITY(ex) \ + set_personality(PER_LINUX | (current->personality & (~PER_MASK))) #else /* CONFIG_64BIT */ #define SET_PERSONALITY(ex) \ do { \ diff --git a/arch/s390/include/asm/posix_types.h b/arch/s390/include/asm/posix_types.h index 7bcc14e..bf2a2ad 100644 --- a/arch/s390/include/asm/posix_types.h +++ b/arch/s390/include/asm/posix_types.h @@ -13,6 +13,7 @@ */ typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; #define __kernel_size_t __kernel_size_t typedef unsigned short __kernel_old_dev_t; @@ -25,7 +26,6 @@ typedef unsigned short __kernel_mode_t; typedef unsigned short __kernel_ipc_pid_t; typedef unsigned short __kernel_uid_t; typedef unsigned short __kernel_gid_t; -typedef int __kernel_ssize_t; typedef int __kernel_ptrdiff_t; #else /* __s390x__ */ @@ -35,7 +35,6 @@ typedef unsigned int __kernel_mode_t; typedef int __kernel_ipc_pid_t; typedef unsigned int __kernel_uid_t; typedef unsigned int __kernel_gid_t; -typedef long __kernel_ssize_t; typedef long __kernel_ptrdiff_t; typedef unsigned long __kernel_sigset_t; /* at least 32 bits */ diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index a0a8340..ce26ac3 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -44,6 +44,7 @@ static inline void smp_call_online_cpu(void (*func)(void *), void *data) } static inline int smp_find_processor_id(int address) { return 0; } +static inline int smp_store_status(int cpu) { return 0; } static inline int smp_vcpu_scheduled(int cpu) { return 1; } static inline void smp_yield_cpu(int cpu) { } static inline void smp_yield(void) { } diff --git a/arch/x86/Makefile b/arch/x86/Makefile index b0c5276..682e9c2 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -27,6 +27,10 @@ ifeq ($(CONFIG_X86_32),y) KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return + # Never want PIC in a 32-bit kernel, prevent breakage with GCC built + # with nonstandard options + KBUILD_CFLAGS += -fno-pic + # prevent gcc from keeping the stack 16 byte aligned KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 5a747dd..f7535be 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -57,7 +57,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index b315a33..33692ea 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -12,8 +12,7 @@ * Simple spin lock operations. There are two variants, one clears IRQ's * on the local processor, one does not. * - * These are fair FIFO ticket locks, which are currently limited to 256 - * CPUs. + * These are fair FIFO ticket locks, which support up to 2^16 CPUs. * * (the type definitions are in asm/spinlock_types.h) */ diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index afb7ff7..ced4534 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -165,7 +165,7 @@ static const unsigned char * const k7_nops[ASM_NOP_MAX+2] = #endif #ifdef P6_NOP1 -static const unsigned char __initconst_or_module p6nops[] = +static const unsigned char p6nops[] = { P6_NOP1, P6_NOP2, diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a6c64aa..c265593 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1356,6 +1356,16 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, if (!IO_APIC_IRQ(irq)) return; + /* + * For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC + * can handle this irq and the apic driver is finialized at this point, + * update the cfg->domain. + */ + if (irq < legacy_pic->nr_legacy_irqs && + cpumask_equal(cfg->domain, cpumask_of(0))) + apic->vector_allocation_domain(0, cfg->domain, + apic->target_cpus()); + if (assign_irq_vector(irq, cfg, apic->target_cpus())) return; diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 46d8786..a5fbc3c 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -144,6 +144,8 @@ static int __init x86_xsave_setup(char *s) { setup_clear_cpu_cap(X86_FEATURE_XSAVE); setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); + setup_clear_cpu_cap(X86_FEATURE_AVX); + setup_clear_cpu_cap(X86_FEATURE_AVX2); return 1; } __setup("noxsave", x86_xsave_setup); diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 3823669..7f2739e 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1522,8 +1522,16 @@ static struct perf_guest_switch_msr *intel_guest_get_msrs(int *nr) arr[0].msr = MSR_CORE_PERF_GLOBAL_CTRL; arr[0].host = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask; arr[0].guest = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_host_mask; + /* + * If PMU counter has PEBS enabled it is not enough to disable counter + * on a guest entry since PEBS memory write can overshoot guest entry + * and corrupt guest memory. Disabling PEBS solves the problem. + */ + arr[1].msr = MSR_IA32_PEBS_ENABLE; + arr[1].host = cpuc->pebs_enabled; + arr[1].guest = 0; - *nr = 1; + *nr = 2; return arr; } diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 7563fda..0a55710 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -796,7 +796,6 @@ static struct intel_uncore_type *nhm_msr_uncores[] = { DEFINE_UNCORE_FORMAT_ATTR(event5, event, "config:1-5"); DEFINE_UNCORE_FORMAT_ATTR(counter, counter, "config:6-7"); -DEFINE_UNCORE_FORMAT_ATTR(mm_cfg, mm_cfg, "config:63"); DEFINE_UNCORE_FORMAT_ATTR(match, match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(mask, mask, "config2:0-63"); @@ -902,16 +901,21 @@ static struct attribute_group nhmex_uncore_cbox_format_group = { .attrs = nhmex_uncore_cbox_formats_attr, }; +/* msr offset for each instance of cbox */ +static unsigned nhmex_cbox_msr_offsets[] = { + 0x0, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x240, 0x2c0, +}; + static struct intel_uncore_type nhmex_uncore_cbox = { .name = "cbox", .num_counters = 6, - .num_boxes = 8, + .num_boxes = 10, .perf_ctr_bits = 48, .event_ctl = NHMEX_C0_MSR_PMON_EV_SEL0, .perf_ctr = NHMEX_C0_MSR_PMON_CTR0, .event_mask = NHMEX_PMON_RAW_EVENT_MASK, .box_ctl = NHMEX_C0_MSR_PMON_GLOBAL_CTL, - .msr_offset = NHMEX_C_MSR_OFFSET, + .msr_offsets = nhmex_cbox_msr_offsets, .pair_ctr_ctl = 1, .ops = &nhmex_uncore_ops, .format_group = &nhmex_uncore_cbox_format_group @@ -1032,24 +1036,22 @@ static struct intel_uncore_type nhmex_uncore_bbox = { static int nhmex_sbox_hw_config(struct intel_uncore_box *box, struct perf_event *event) { - struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; - struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; + struct hw_perf_event *hwc = &event->hw; + struct hw_perf_event_extra *reg1 = &hwc->extra_reg; + struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - if (event->attr.config & NHMEX_S_PMON_MM_CFG_EN) { - reg1->config = event->attr.config1; - reg2->config = event->attr.config2; - } else { - reg1->config = ~0ULL; - reg2->config = ~0ULL; - } + /* only TO_R_PROG_EV event uses the match/mask register */ + if ((hwc->config & NHMEX_PMON_CTL_EV_SEL_MASK) != + NHMEX_S_EVENT_TO_R_PROG_EV) + return 0; if (box->pmu->pmu_idx == 0) reg1->reg = NHMEX_S0_MSR_MM_CFG; else reg1->reg = NHMEX_S1_MSR_MM_CFG; - reg1->idx = 0; - + reg1->config = event->attr.config1; + reg2->config = event->attr.config2; return 0; } @@ -1059,8 +1061,8 @@ static void nhmex_sbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - wrmsrl(reg1->reg, 0); - if (reg1->config != ~0ULL || reg2->config != ~0ULL) { + if (reg1->idx != EXTRA_REG_NONE) { + wrmsrl(reg1->reg, 0); wrmsrl(reg1->reg + 1, reg1->config); wrmsrl(reg1->reg + 2, reg2->config); wrmsrl(reg1->reg, NHMEX_S_PMON_MM_CFG_EN); @@ -1074,7 +1076,6 @@ static struct attribute *nhmex_uncore_sbox_formats_attr[] = { &format_attr_edge.attr, &format_attr_inv.attr, &format_attr_thresh8.attr, - &format_attr_mm_cfg.attr, &format_attr_match.attr, &format_attr_mask.attr, NULL, @@ -1142,6 +1143,9 @@ static struct extra_reg nhmex_uncore_mbox_extra_regs[] = { EVENT_EXTRA_END }; +/* Nehalem-EX or Westmere-EX ? */ +bool uncore_nhmex; + static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 config) { struct intel_uncore_extra_reg *er; @@ -1171,18 +1175,29 @@ static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 return false; /* mask of the shared fields */ - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK; er = &box->shared_regs[EXTRA_REG_NHMEX_M_ZDP_CTL_FVC]; raw_spin_lock_irqsave(&er->lock, flags); /* add mask of the non-shared field if it's in use */ - if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) - mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) { + if (uncore_nhmex) + mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask |= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + } if (!atomic_read(&er->ref) || !((er->config ^ config) & mask)) { atomic_add(1 << (idx * 8), &er->ref); - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | - NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | + NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK | + WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); er->config &= ~mask; er->config |= (config & mask); ret = true; @@ -1216,7 +1231,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) /* get the non-shared control bits and shift them */ idx = orig_idx - EXTRA_REG_NHMEX_M_ZDP_CTL_FVC; - config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + config &= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); if (new_idx > orig_idx) { idx = new_idx - orig_idx; config <<= 3 * idx; @@ -1226,6 +1244,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) } /* add the shared control bits back */ + if (uncore_nhmex) + config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; + else + config |= WSMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; if (modify) { /* adjust the main event selector */ @@ -1264,7 +1286,8 @@ again: } /* for the match/mask registers */ - if ((uncore_box_is_fake(box) || !reg2->alloc) && + if (reg2->idx != EXTRA_REG_NONE && + (uncore_box_is_fake(box) || !reg2->alloc) && !nhmex_mbox_get_shared_reg(box, reg2->idx, reg2->config)) goto fail; @@ -1278,7 +1301,8 @@ again: if (idx[0] != 0xff && idx[0] != __BITS_VALUE(reg1->idx, 0, 8)) nhmex_mbox_alter_er(event, idx[0], true); reg1->alloc |= alloc; - reg2->alloc = 1; + if (reg2->idx != EXTRA_REG_NONE) + reg2->alloc = 1; } return NULL; fail: @@ -1342,9 +1366,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event struct extra_reg *er; unsigned msr; int reg_idx = 0; - - if (WARN_ON_ONCE(reg1->idx != -1)) - return -EINVAL; /* * The mbox events may require 2 extra MSRs at the most. But only * the lower 32 bits in these MSRs are significant, so we can use @@ -1355,11 +1376,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event continue; if (event->attr.config1 & ~er->valid_mask) return -EINVAL; - if (er->idx == __BITS_VALUE(reg1->idx, 0, 8) || - er->idx == __BITS_VALUE(reg1->idx, 1, 8)) - continue; - if (WARN_ON_ONCE(reg_idx >= 2)) - return -EINVAL; msr = er->msr + type->msr_offset * box->pmu->pmu_idx; if (WARN_ON_ONCE(msr >= 0xffff || er->idx >= 0xff)) @@ -1368,6 +1384,8 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event /* always use the 32~63 bits to pass the PLD config */ if (er->idx == EXTRA_REG_NHMEX_M_PLD) reg_idx = 1; + else if (WARN_ON_ONCE(reg_idx > 0)) + return -EINVAL; reg1->idx &= ~(0xff << (reg_idx * 8)); reg1->reg &= ~(0xffff << (reg_idx * 16)); @@ -1376,17 +1394,21 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->config = event->attr.config1; reg_idx++; } - /* use config2 to pass the filter config */ - reg2->idx = EXTRA_REG_NHMEX_M_FILTER; - if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) - reg2->config = event->attr.config2; - else - reg2->config = ~0ULL; - if (box->pmu->pmu_idx == 0) - reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; - else - reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; - + /* + * The mbox only provides ability to perform address matching + * for the PLD events. + */ + if (reg_idx == 2) { + reg2->idx = EXTRA_REG_NHMEX_M_FILTER; + if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) + reg2->config = event->attr.config2; + else + reg2->config = ~0ULL; + if (box->pmu->pmu_idx == 0) + reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; + else + reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; + } return 0; } @@ -1422,34 +1444,36 @@ static void nhmex_mbox_msr_enable_event(struct intel_uncore_box *box, struct per wrmsrl(__BITS_VALUE(reg1->reg, 1, 16), nhmex_mbox_shared_reg_config(box, idx)); - wrmsrl(reg2->reg, 0); - if (reg2->config != ~0ULL) { - wrmsrl(reg2->reg + 1, - reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); - wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & - (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); - wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + if (reg2->idx != EXTRA_REG_NONE) { + wrmsrl(reg2->reg, 0); + if (reg2->config != ~0ULL) { + wrmsrl(reg2->reg + 1, + reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); + wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & + (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); + wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + } } wrmsrl(hwc->config_base, hwc->config | NHMEX_PMON_CTL_EN_BIT0); } -DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); -DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); -DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); -DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); -DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); -DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); -DEFINE_UNCORE_FORMAT_ATTR(filter_cfg, filter_cfg, "config2:63"); -DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); -DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); -DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); +DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); +DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); +DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); +DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); +DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); +DEFINE_UNCORE_FORMAT_ATTR(filter_cfg_en, filter_cfg_en, "config2:63"); +DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); +DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); +DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_count_mode.attr, @@ -1458,7 +1482,7 @@ static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_flag_mode.attr, &format_attr_inc_sel.attr, &format_attr_set_flag_sel.attr, - &format_attr_filter_cfg.attr, + &format_attr_filter_cfg_en.attr, &format_attr_filter_match.attr, &format_attr_filter_mask.attr, &format_attr_dsp.attr, @@ -1482,6 +1506,12 @@ static struct uncore_event_desc nhmex_uncore_mbox_events[] = { { /* end: all zeroes */ }, }; +static struct uncore_event_desc wsmex_uncore_mbox_events[] = { + INTEL_UNCORE_EVENT_DESC(bbox_cmds_read, "inc_sel=0xd,fvc=0x5000"), + INTEL_UNCORE_EVENT_DESC(bbox_cmds_write, "inc_sel=0xd,fvc=0x5040"), + { /* end: all zeroes */ }, +}; + static struct intel_uncore_ops nhmex_uncore_mbox_ops = { NHMEX_UNCORE_OPS_COMMON_INIT(), .enable_event = nhmex_mbox_msr_enable_event, @@ -1513,7 +1543,7 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) struct hw_perf_event_extra *reg1 = &hwc->extra_reg; int port; - /* adjust the main event selector */ + /* adjust the main event selector and extra register index */ if (reg1->idx % 2) { reg1->idx--; hwc->config -= 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1522,29 +1552,17 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) hwc->config += 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; } - /* adjust address or config of extra register */ + /* adjust extra register config */ port = reg1->idx / 6 + box->pmu->pmu_idx * 4; switch (reg1->idx % 6) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; case 2: - /* the 8~15 bits to the 0~7 bits */ + /* shift the 8~15 bits to the 0~7 bits */ reg1->config >>= 8; break; case 3: - /* the 0~7 bits to the 8~15 bits */ + /* shift the 0~7 bits to the 8~15 bits */ reg1->config <<= 8; break; - case 4: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - break; - case 5: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - break; }; } @@ -1671,7 +1689,7 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; - int port, idx; + int idx; idx = (event->hw.config & NHMEX_R_PMON_CTL_EV_SEL_MASK) >> NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1681,27 +1699,11 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->idx = idx; reg1->config = event->attr.config1; - port = idx / 6 + box->pmu->pmu_idx * 4; - idx %= 6; - switch (idx) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; - case 2: - case 3: - reg1->reg = NHMEX_R_MSR_PORTN_QLX_CFG(port); - break; + switch (idx % 6) { case 4: case 5: - if (idx == 4) - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - else - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - reg2->config = event->attr.config2; hwc->config |= event->attr.config & (~0ULL << 32); + reg2->config = event->attr.config2; break; }; return 0; @@ -1727,28 +1729,34 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - int idx, er_idx; + int idx, port; - idx = reg1->idx % 6; - er_idx = idx; - if (er_idx > 2) - er_idx--; - er_idx += (reg1->idx / 6) * 5; + idx = reg1->idx; + port = idx / 6 + box->pmu->pmu_idx * 4; - switch (idx) { + switch (idx % 6) { case 0: + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG0(port), reg1->config); + break; case 1: - wrmsrl(reg1->reg, reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG1(port), reg1->config); break; case 2: case 3: - wrmsrl(reg1->reg, nhmex_rbox_shared_reg_config(box, er_idx)); + wrmsrl(NHMEX_R_MSR_PORTN_QLX_CFG(port), + nhmex_rbox_shared_reg_config(box, 2 + (idx / 6) * 5)); break; case 4: + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MASK(port), reg2->config); + break; case 5: - wrmsrl(reg1->reg, reg1->config); - wrmsrl(reg1->reg + 1, hwc->config >> 32); - wrmsrl(reg1->reg + 2, reg2->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MASK(port), reg2->config); break; }; @@ -1756,8 +1764,8 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per (hwc->config & NHMEX_R_PMON_CTL_EV_SEL_MASK)); } -DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config:32-63"); -DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config1:0-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(xbr_mask, xbr_mask, "config2:0-63"); DEFINE_UNCORE_FORMAT_ATTR(qlx_cfg, qlx_cfg, "config1:0-15"); DEFINE_UNCORE_FORMAT_ATTR(iperf_cfg, iperf_cfg, "config1:0-31"); @@ -2303,6 +2311,7 @@ int uncore_pmu_event_init(struct perf_event *event) event->hw.idx = -1; event->hw.last_tag = ~0ULL; event->hw.extra_reg.idx = EXTRA_REG_NONE; + event->hw.branch_reg.idx = EXTRA_REG_NONE; if (event->attr.config == UNCORE_FIXED_EVENT) { /* no fixed counter */ @@ -2373,7 +2382,7 @@ static void __init uncore_type_exit(struct intel_uncore_type *type) type->attr_groups[1] = NULL; } -static void uncore_types_exit(struct intel_uncore_type **types) +static void __init uncore_types_exit(struct intel_uncore_type **types) { int i; for (i = 0; types[i]; i++) @@ -2814,7 +2823,13 @@ static int __init uncore_cpu_init(void) snbep_uncore_cbox.num_boxes = max_cores; msr_uncores = snbep_msr_uncores; break; - case 46: + case 46: /* Nehalem-EX */ + uncore_nhmex = true; + case 47: /* Westmere-EX aka. Xeon E7 */ + if (!uncore_nhmex) + nhmex_uncore_mbox.event_descs = wsmex_uncore_mbox_events; + if (nhmex_uncore_cbox.num_boxes > max_cores) + nhmex_uncore_cbox.num_boxes = max_cores; msr_uncores = nhmex_msr_uncores; break; default: diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index c9e5dc5..5b81c18 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -230,6 +230,7 @@ #define NHMEX_S1_MSR_MASK 0xe5a #define NHMEX_S_PMON_MM_CFG_EN (0x1ULL << 63) +#define NHMEX_S_EVENT_TO_R_PROG_EV 0 /* NHM-EX Mbox */ #define NHMEX_M0_MSR_GLOBAL_CTL 0xca0 @@ -275,18 +276,12 @@ NHMEX_M_PMON_CTL_INC_SEL_MASK | \ NHMEX_M_PMON_CTL_SET_FLAG_SEL_MASK) - -#define NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK 0x1f -#define NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK (0x7 << 5) -#define NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK (0x7 << 8) -#define NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR (1 << 23) -#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK \ - (NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR) +#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 11) - 1) | (1 << 23)) #define NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (11 + 3 * (n))) +#define WSMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 12) - 1) | (1 << 24)) +#define WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (12 + 3 * (n))) + /* * use the 9~13 bits to select event If the 7th bit is not set, * otherwise use the 19~21 bits to select event. @@ -368,6 +363,7 @@ struct intel_uncore_type { unsigned num_shared_regs:8; unsigned single_fixed:1; unsigned pair_ctr_ctl:1; + unsigned *msr_offsets; struct event_constraint unconstrainted; struct event_constraint *constraints; struct intel_uncore_pmu *pmus; @@ -485,29 +481,31 @@ unsigned uncore_pci_perf_ctr(struct intel_uncore_box *box, int idx) return idx * 8 + box->pmu->type->perf_ctr; } -static inline -unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_box_offset(struct intel_uncore_box *box) +{ + struct intel_uncore_pmu *pmu = box->pmu; + return pmu->type->msr_offsets ? + pmu->type->msr_offsets[pmu->pmu_idx] : + pmu->type->msr_offset * pmu->pmu_idx; +} + +static inline unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->box_ctl) return 0; - return box->pmu->type->box_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->box_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->fixed_ctl) return 0; - return box->pmu->type->fixed_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) { - return box->pmu->type->fixed_ctr + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctr + uncore_msr_box_offset(box); } static inline @@ -515,7 +513,7 @@ unsigned uncore_msr_event_ctl(struct intel_uncore_box *box, int idx) { return box->pmu->type->event_ctl + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline @@ -523,7 +521,7 @@ unsigned uncore_msr_perf_ctr(struct intel_uncore_box *box, int idx) { return box->pmu->type->perf_ctr + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 7ad683d..d44f782 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -270,7 +270,7 @@ void fixup_irqs(void) if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { break_affinity = 1; - affinity = cpu_all_mask; + affinity = cpu_online_mask; } chip = irq_data_get_irq_chip(data); diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 8a2ce8f..82746f9 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -143,11 +143,12 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, unsigned int *current_size) { struct microcode_header_amd *mc_hdr; - unsigned int actual_size; + unsigned int actual_size, patch_size; u16 equiv_cpu_id; /* size of the current patch we're staring at */ - *current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE; + patch_size = *(u32 *)(ucode_ptr + 4); + *current_size = patch_size + SECTION_HDR_SIZE; equiv_cpu_id = find_equiv_id(); if (!equiv_cpu_id) @@ -174,7 +175,7 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, /* * now that the header looks sane, verify its size */ - actual_size = verify_ucode_size(cpu, *current_size, leftover_size); + actual_size = verify_ucode_size(cpu, patch_size, leftover_size); if (!actual_size) return 0; diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 97d9a99..a3b57a2 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -475,13 +475,26 @@ register_address(struct x86_emulate_ctxt *ctxt, unsigned long reg) return address_mask(ctxt, reg); } +static void masked_increment(ulong *reg, ulong mask, int inc) +{ + assign_masked(reg, *reg + inc, mask); +} + static inline void register_address_increment(struct x86_emulate_ctxt *ctxt, unsigned long *reg, int inc) { + ulong mask; + if (ctxt->ad_bytes == sizeof(unsigned long)) - *reg += inc; + mask = ~0UL; else - *reg = (*reg & ~ad_mask(ctxt)) | ((*reg + inc) & ad_mask(ctxt)); + mask = ad_mask(ctxt); + masked_increment(reg, mask, inc); +} + +static void rsp_increment(struct x86_emulate_ctxt *ctxt, int inc) +{ + masked_increment(&ctxt->regs[VCPU_REGS_RSP], stack_mask(ctxt), inc); } static inline void jmp_rel(struct x86_emulate_ctxt *ctxt, int rel) @@ -1522,8 +1535,8 @@ static int push(struct x86_emulate_ctxt *ctxt, void *data, int bytes) { struct segmented_address addr; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], -bytes); - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + rsp_increment(ctxt, -bytes); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; return segmented_write(ctxt, addr, data, bytes); @@ -1542,13 +1555,13 @@ static int emulate_pop(struct x86_emulate_ctxt *ctxt, int rc; struct segmented_address addr; - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; rc = segmented_read(ctxt, addr, dest, len); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], len); + rsp_increment(ctxt, len); return rc; } @@ -1688,8 +1701,7 @@ static int em_popa(struct x86_emulate_ctxt *ctxt) while (reg >= VCPU_REGS_RAX) { if (reg == VCPU_REGS_RSP) { - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], - ctxt->op_bytes); + rsp_increment(ctxt, ctxt->op_bytes); --reg; } @@ -2825,7 +2837,7 @@ static int em_ret_near_imm(struct x86_emulate_ctxt *ctxt) rc = emulate_pop(ctxt, &ctxt->dst.val, ctxt->op_bytes); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], ctxt->src.val); + rsp_increment(ctxt, ctxt->src.val); return X86EMUL_CONTINUE; } diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 01ca004..7fbd0d2 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -4113,16 +4113,21 @@ static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc) LIST_HEAD(invalid_list); /* + * Never scan more than sc->nr_to_scan VM instances. + * Will not hit this condition practically since we do not try + * to shrink more than one VM and it is very unlikely to see + * !n_used_mmu_pages so many times. + */ + if (!nr_to_scan--) + break; + /* * n_used_mmu_pages is accessed without holding kvm->mmu_lock * here. We may skip a VM instance errorneosly, but we do not * want to shrink a VM that only started to populate its MMU * anyway. */ - if (kvm->arch.n_used_mmu_pages > 0) { - if (!nr_to_scan--) - break; + if (!kvm->arch.n_used_mmu_pages) continue; - } idx = srcu_read_lock(&kvm->srcu); spin_lock(&kvm->mmu_lock); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 42bce48..148ed66 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -806,7 +806,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc); * kvm-specific. Those are put in the beginning of the list. */ -#define KVM_SAVE_MSRS_BEGIN 9 +#define KVM_SAVE_MSRS_BEGIN 10 static u32 msrs_to_save[] = { MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK, MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW, @@ -2000,6 +2000,9 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) case MSR_KVM_STEAL_TIME: data = vcpu->arch.st.msr_val; break; + case MSR_KVM_PV_EOI_EN: + data = vcpu->arch.pv_eoi.msr_val; + break; case MSR_IA32_P5_MC_ADDR: case MSR_IA32_P5_MC_TYPE: case MSR_IA32_MCG_CAP: diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index f6679a7..b91e485 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -56,9 +56,16 @@ static int vma_shareable(struct vm_area_struct *vma, unsigned long addr) } /* - * search for a shareable pmd page for hugetlb. + * Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc() + * and returns the corresponding pte. While this is not necessary for the + * !shared pmd case because we can allocate the pmd later as well, it makes the + * code much cleaner. pmd allocation is essential for the shared case because + * pud has to be populated inside the same i_mmap_mutex section - otherwise + * racing tasks could either miss the sharing (see huge_pte_offset) or select a + * bad pmd for sharing. */ -static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) +static pte_t * +huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) { struct vm_area_struct *vma = find_vma(mm, addr); struct address_space *mapping = vma->vm_file->f_mapping; @@ -68,9 +75,10 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) struct vm_area_struct *svma; unsigned long saddr; pte_t *spte = NULL; + pte_t *pte; if (!vma_shareable(vma, addr)) - return; + return (pte_t *)pmd_alloc(mm, pud, addr); mutex_lock(&mapping->i_mmap_mutex); vma_prio_tree_foreach(svma, &iter, &mapping->i_mmap, idx, idx) { @@ -97,7 +105,9 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) put_page(virt_to_page(spte)); spin_unlock(&mm->page_table_lock); out: + pte = (pte_t *)pmd_alloc(mm, pud, addr); mutex_unlock(&mapping->i_mmap_mutex); + return pte; } /* @@ -142,8 +152,9 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, } else { BUG_ON(sz != PMD_SIZE); if (pud_none(*pud)) - huge_pmd_share(mm, addr, pud); - pte = (pte_t *) pmd_alloc(mm, pud, addr); + pte = huge_pmd_share(mm, addr, pud); + else + pte = (pte_t *)pmd_alloc(mm, pud, addr); } } BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte)); diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 931930a..a718e0d 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -919,13 +919,11 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages, /* * On success we use clflush, when the CPU supports it to - * avoid the wbindv. If the CPU does not support it, in the - * error case, and during early boot (for EFI) we fall back - * to cpa_flush_all (which uses wbinvd): + * avoid the wbindv. If the CPU does not support it and in the + * error case we fall back to cpa_flush_all (which uses + * wbindv): */ - if (early_boot_irqs_disabled) - __cpa_flush_all((void *)(long)cache); - else if (!ret && cpu_has_clflush) { + if (!ret && cpu_has_clflush) { if (cpa.flags & (CPA_PAGES_ARRAY | CPA_ARRAY)) { cpa_flush_array(addr, numpages, cache, cpa.flags, pages); diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 2dc29f5..92660eda 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -234,7 +234,22 @@ static efi_status_t __init phys_efi_set_virtual_address_map( return status; } -static int efi_set_rtc_mmss(unsigned long nowtime) +static efi_status_t __init phys_efi_get_time(efi_time_t *tm, + efi_time_cap_t *tc) +{ + unsigned long flags; + efi_status_t status; + + spin_lock_irqsave(&rtc_lock, flags); + efi_call_phys_prelog(); + status = efi_call_phys2(efi_phys.get_time, virt_to_phys(tm), + virt_to_phys(tc)); + efi_call_phys_epilog(); + spin_unlock_irqrestore(&rtc_lock, flags); + return status; +} + +int efi_set_rtc_mmss(unsigned long nowtime) { int real_seconds, real_minutes; efi_status_t status; @@ -263,7 +278,7 @@ static int efi_set_rtc_mmss(unsigned long nowtime) return 0; } -static unsigned long efi_get_time(void) +unsigned long efi_get_time(void) { efi_status_t status; efi_time_t eft; @@ -606,13 +621,18 @@ static int __init efi_runtime_init(void) } /* * We will only need *early* access to the following - * EFI runtime service before set_virtual_address_map + * two EFI runtime services before set_virtual_address_map * is invoked. */ + efi_phys.get_time = (efi_get_time_t *)runtime->get_time; efi_phys.set_virtual_address_map = (efi_set_virtual_address_map_t *) runtime->set_virtual_address_map; - + /* + * Make efi_get_time can be called before entering + * virtual mode. + */ + efi.get_time = phys_efi_get_time; early_iounmap(runtime, sizeof(efi_runtime_services_t)); return 0; @@ -700,10 +720,12 @@ void __init efi_init(void) efi_enabled = 0; return; } +#ifdef CONFIG_X86_32 if (efi_native) { x86_platform.get_wallclock = efi_get_time; x86_platform.set_wallclock = efi_set_rtc_mmss; } +#endif #if EFI_DEBUG print_efi_memmap(); diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index b2d534c..8869287 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -72,7 +72,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ -D_WAKEUP \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/../../boot/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl index 29aed7a..a582bfe 100644 --- a/arch/x86/syscalls/syscall_64.tbl +++ b/arch/x86/syscalls/syscall_64.tbl @@ -60,8 +60,8 @@ 51 common getsockname sys_getsockname 52 common getpeername sys_getpeername 53 common socketpair sys_socketpair -54 common setsockopt sys_setsockopt -55 common getsockopt sys_getsockopt +54 64 setsockopt sys_setsockopt +55 64 getsockopt sys_getsockopt 56 common clone stub_clone 57 common fork stub_fork 58 common vfork stub_vfork @@ -353,3 +353,5 @@ 538 x32 sendmmsg compat_sys_sendmmsg 539 x32 process_vm_readv compat_sys_process_vm_readv 540 x32 process_vm_writev compat_sys_process_vm_writev +541 x32 setsockopt compat_sys_setsockopt +542 x32 getsockopt compat_sys_getsockopt diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index bf4bda6..9642d4a 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -31,7 +31,6 @@ #include <linux/pci.h> #include <linux/gfp.h> #include <linux/memblock.h> -#include <linux/syscore_ops.h> #include <xen/xen.h> #include <xen/interface/xen.h> @@ -1470,130 +1469,38 @@ asmlinkage void __init xen_start_kernel(void) #endif } -#ifdef CONFIG_XEN_PVHVM -/* - * The pfn containing the shared_info is located somewhere in RAM. This - * will cause trouble if the current kernel is doing a kexec boot into a - * new kernel. The new kernel (and its startup code) can not know where - * the pfn is, so it can not reserve the page. The hypervisor will - * continue to update the pfn, and as a result memory corruption occours - * in the new kernel. - * - * One way to work around this issue is to allocate a page in the - * xen-platform pci device's BAR memory range. But pci init is done very - * late and the shared_info page is already in use very early to read - * the pvclock. So moving the pfn from RAM to MMIO is racy because some - * code paths on other vcpus could access the pfn during the small - * window when the old pfn is moved to the new pfn. There is even a - * small window were the old pfn is not backed by a mfn, and during that - * time all reads return -1. - * - * Because it is not known upfront where the MMIO region is located it - * can not be used right from the start in xen_hvm_init_shared_info. - * - * To minimise trouble the move of the pfn is done shortly before kexec. - * This does not eliminate the race because all vcpus are still online - * when the syscore_ops will be called. But hopefully there is no work - * pending at this point in time. Also the syscore_op is run last which - * reduces the risk further. - */ - -static struct shared_info *xen_hvm_shared_info; - -static void xen_hvm_connect_shared_info(unsigned long pfn) +void __ref xen_hvm_init_shared_info(void) { + int cpu; struct xen_add_to_physmap xatp; + static struct shared_info *shared_info_page = 0; + if (!shared_info_page) + shared_info_page = (struct shared_info *) + extend_brk(PAGE_SIZE, PAGE_SIZE); xatp.domid = DOMID_SELF; xatp.idx = 0; xatp.space = XENMAPSPACE_shared_info; - xatp.gpfn = pfn; + xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT; if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp)) BUG(); -} -static void xen_hvm_set_shared_info(struct shared_info *sip) -{ - int cpu; - - HYPERVISOR_shared_info = sip; + HYPERVISOR_shared_info = (struct shared_info *)shared_info_page; /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info * page, we use it in the event channel upcall and in some pvclock * related functions. We don't need the vcpu_info placement * optimizations because we don't use any pv_mmu or pv_irq op on * HVM. - * When xen_hvm_set_shared_info is run at boot time only vcpu 0 is - * online but xen_hvm_set_shared_info is run at resume time too and + * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is + * online but xen_hvm_init_shared_info is run at resume time too and * in that case multiple vcpus might be online. */ for_each_online_cpu(cpu) { per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; } } -/* Reconnect the shared_info pfn to a mfn */ -void xen_hvm_resume_shared_info(void) -{ - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); -} - -#ifdef CONFIG_KEXEC -static struct shared_info *xen_hvm_shared_info_kexec; -static unsigned long xen_hvm_shared_info_pfn_kexec; - -/* Remember a pfn in MMIO space for kexec reboot */ -void __devinit xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn) -{ - xen_hvm_shared_info_kexec = sip; - xen_hvm_shared_info_pfn_kexec = pfn; -} - -static void xen_hvm_syscore_shutdown(void) -{ - struct xen_memory_reservation reservation = { - .domid = DOMID_SELF, - .nr_extents = 1, - }; - unsigned long prev_pfn; - int rc; - - if (!xen_hvm_shared_info_kexec) - return; - - prev_pfn = __pa(xen_hvm_shared_info) >> PAGE_SHIFT; - set_xen_guest_handle(reservation.extent_start, &prev_pfn); - - /* Move pfn to MMIO, disconnects previous pfn from mfn */ - xen_hvm_connect_shared_info(xen_hvm_shared_info_pfn_kexec); - - /* Update pointers, following hypercall is also a memory barrier */ - xen_hvm_set_shared_info(xen_hvm_shared_info_kexec); - - /* Allocate new mfn for previous pfn */ - do { - rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation); - if (rc == 0) - msleep(123); - } while (rc == 0); - - /* Make sure the previous pfn is really connected to a (new) mfn */ - BUG_ON(rc != 1); -} - -static struct syscore_ops xen_hvm_syscore_ops = { - .shutdown = xen_hvm_syscore_shutdown, -}; -#endif - -/* Use a pfn in RAM, may move to MMIO before kexec. */ -static void __init xen_hvm_init_shared_info(void) -{ - /* Remember pointer for resume */ - xen_hvm_shared_info = extend_brk(PAGE_SIZE, PAGE_SIZE); - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); - xen_hvm_set_shared_info(xen_hvm_shared_info); -} - +#ifdef CONFIG_XEN_PVHVM static void __init init_hvm_pv_info(void) { int major, minor; @@ -1644,9 +1551,6 @@ static void __init xen_hvm_guest_init(void) init_hvm_pv_info(); xen_hvm_init_shared_info(); -#ifdef CONFIG_KEXEC - register_syscore_ops(&xen_hvm_syscore_ops); -#endif if (xen_feature(XENFEAT_hvm_callback_vector)) xen_have_vector_callback = 1; diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index b2e91d4..d4b2554 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -196,9 +196,11 @@ RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3); /* When we populate back during bootup, the amount of pages can vary. The * max we have is seen is 395979, but that does not mean it can't be more. - * But some machines can have 3GB I/O holes even. So lets reserve enough - * for 4GB of I/O and E820 holes. */ -RESERVE_BRK(p2m_populated, PMD_SIZE * 4); + * Some machines can have 3GB I/O holes even. With early_can_reuse_p2m_middle + * it can re-use Xen provided mfn_list array, so we only need to allocate at + * most three P2M top nodes. */ +RESERVE_BRK(p2m_populated, PAGE_SIZE * 3); + static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_P2M_PFN); @@ -575,12 +577,99 @@ static bool __init early_alloc_p2m(unsigned long pfn) } return true; } + +/* + * Skim over the P2M tree looking at pages that are either filled with + * INVALID_P2M_ENTRY or with 1:1 PFNs. If found, re-use that page and + * replace the P2M leaf with a p2m_missing or p2m_identity. + * Stick the old page in the new P2M tree location. + */ +bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_mfn) +{ + unsigned topidx; + unsigned mididx; + unsigned ident_pfns; + unsigned inv_pfns; + unsigned long *p2m; + unsigned long *mid_mfn_p; + unsigned idx; + unsigned long pfn; + + /* We only look when this entails a P2M middle layer */ + if (p2m_index(set_pfn)) + return false; + + for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { + topidx = p2m_top_index(pfn); + + if (!p2m_top[topidx]) + continue; + + if (p2m_top[topidx] == p2m_mid_missing) + continue; + + mididx = p2m_mid_index(pfn); + p2m = p2m_top[topidx][mididx]; + if (!p2m) + continue; + + if ((p2m == p2m_missing) || (p2m == p2m_identity)) + continue; + + if ((unsigned long)p2m == INVALID_P2M_ENTRY) + continue; + + ident_pfns = 0; + inv_pfns = 0; + for (idx = 0; idx < P2M_PER_PAGE; idx++) { + /* IDENTITY_PFNs are 1:1 */ + if (p2m[idx] == IDENTITY_FRAME(pfn + idx)) + ident_pfns++; + else if (p2m[idx] == INVALID_P2M_ENTRY) + inv_pfns++; + else + break; + } + if ((ident_pfns == P2M_PER_PAGE) || (inv_pfns == P2M_PER_PAGE)) + goto found; + } + return false; +found: + /* Found one, replace old with p2m_identity or p2m_missing */ + p2m_top[topidx][mididx] = (ident_pfns ? p2m_identity : p2m_missing); + /* And the other for save/restore.. */ + mid_mfn_p = p2m_top_mfn_p[topidx]; + /* NOTE: Even if it is a p2m_identity it should still be point to + * a page filled with INVALID_P2M_ENTRY entries. */ + mid_mfn_p[mididx] = virt_to_mfn(p2m_missing); + + /* Reset where we want to stick the old page in. */ + topidx = p2m_top_index(set_pfn); + mididx = p2m_mid_index(set_pfn); + + /* This shouldn't happen */ + if (WARN_ON(p2m_top[topidx] == p2m_mid_missing)) + early_alloc_p2m(set_pfn); + + if (WARN_ON(p2m_top[topidx][mididx] != p2m_missing)) + return false; + + p2m_init(p2m); + p2m_top[topidx][mididx] = p2m; + mid_mfn_p = p2m_top_mfn_p[topidx]; + mid_mfn_p[mididx] = virt_to_mfn(p2m); + + return true; +} bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn) { if (unlikely(!__set_phys_to_machine(pfn, mfn))) { if (!early_alloc_p2m(pfn)) return false; + if (early_can_reuse_p2m_middle(pfn, mfn)) + return __set_phys_to_machine(pfn, mfn); + if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/)) return false; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index ead8557..d11ca11 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -78,9 +78,16 @@ static void __init xen_add_extra_mem(u64 start, u64 size) memblock_reserve(start, size); xen_max_p2m_pfn = PFN_DOWN(start + size); + for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) { + unsigned long mfn = pfn_to_mfn(pfn); + + if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn)) + continue; + WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n", + pfn, mfn); - for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++) __set_phys_to_machine(pfn, INVALID_P2M_ENTRY); + } } static unsigned long __init xen_do_chunk(unsigned long start, diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index ae8a00c..45329c8 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -30,7 +30,7 @@ void xen_arch_hvm_post_suspend(int suspend_cancelled) { #ifdef CONFIG_XEN_PVHVM int cpu; - xen_hvm_resume_shared_info(); + xen_hvm_init_shared_info(); xen_callback_vector(); xen_unplug_emulated_devices(); if (xen_feature(XENFEAT_hvm_safe_pvclock)) { diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 1e4329e..202d4c1 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -41,7 +41,7 @@ void xen_enable_syscall(void); void xen_vcpu_restore(void); void xen_callback_vector(void); -void xen_hvm_resume_shared_info(void); +void xen_hvm_init_shared_info(void); void xen_unplug_emulated_devices(void); void __init xen_build_dynamic_phys_to_machine(void); |