summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-omap1/clock_data.c12
-rw-r--r--arch/arm/mach-omap2/cclock44xx_data.c20
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c7
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.h9
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c7
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c6
6 files changed, 45 insertions, 16 deletions
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index cb7c6ae..6c4f766 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -543,15 +543,6 @@ static struct clk usb_dc_ck = {
/* Direct from ULPD, no parent */
.rate = 48000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
- .enable_bit = USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
- .name = "usb_dc_ck",
- .ops = &clkops_generic,
- /* Direct from ULPD, no parent */
- .rate = 48000000,
- .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT,
};
@@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = {
CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
- CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
- CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX),
+ CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX),
CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 3d58f33..0c6834a 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -52,6 +52,13 @@
*/
#define OMAP4_DPLL_ABE_DEFFREQ 98304000
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ 960000000
+
/* Root clocks */
DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+ OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@@ -1538,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X),
CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X),
CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X),
+ CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X),
CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X),
CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X),
CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X),
@@ -1705,5 +1717,13 @@ int __init omap4xxx_clk_init(void)
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+ /*
+ * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+ * domain can transition to retention state when not in use.
+ */
+ rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+ if (rc)
+ pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
return 0;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index c2c798c..a202a47 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
}
if (sf & SYSC_HAS_MIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+ if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_NO;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
@@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
}
if (sf & SYSC_HAS_MIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+ if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+ (oh->flags & HWMOD_FORCE_MSTANDBY)) {
idlemode = HWMOD_IDLEMODE_FORCE;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index d43d9b6..d5dc935 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm {
*
* HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
* of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- * of standby, rather than relying on module smart-standby
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
+ * out of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc. XXX probably belongs outside the main hwmod file
* XXX Should be HWMOD_SETUP_NO_RESET
@@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm {
* correctly, or this is being abused to deal with some PM latency
* issues -- but we're currently suffering from a shortage of
* folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ * is kept in force-standby mode. Failing to do so causes PM problems
+ * with musb on OMAP3630 at least. Note that musb has a dedicated register
+ * to control MSTANDBY signal when MIDLEMODE is set to force-standby.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_16BIT_REG (1 << 8)
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
+#define HWMOD_FORCE_MSTANDBY (1 << 11)
/*
* omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ac7e03e..5112d04 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
* Erratum ID: i479 idle_req / idle_ack mechanism potentially
* broken when autoidle is enabled
* workaround is to disable the autoidle bit at module level.
+ *
+ * Enabling the device in any other MIDLEMODE setting but force-idle
+ * causes core_pwrdm not enter idle states at least on OMAP3630.
+ * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+ * signal when MIDLEMODE is set to force-idle.
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
- | HWMOD_SWSUP_MSTANDBY,
+ | HWMOD_FORCE_MSTANDBY,
};
/* usb_otg_hs */
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 0e47d2e..9e05765 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
{ }
};
+static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
+ { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
+};
+
/* ocp2scp_usb_phy */
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
@@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
},
},
.dev_attr = ocp2scp_dev_attr,
+ .opt_clks = ocp2scp_usb_phy_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
};
/*
generated by cgit v0.10.2 at 2024-11-15 12:05:35 (GMT)